-- ----------------------------
-- 1、部门表
-- ----------------------------
drop table if exists sys_dept;
create table sys_dept (
  dept_id           bigint(20)      not null auto_increment    comment '部门id',
  parent_id         bigint(20)      default 0                  comment '父部门id',
  ancestors         varchar(50)     default ''                 comment '祖级列表',
  dept_name         varchar(30)     default ''                 comment '部门名称',
  order_num         int(4)          default 0                  comment '显示顺序',
  leader            varchar(20)     default null               comment '负责人',
  phone             varchar(11)     default null               comment '联系电话',
  email             varchar(50)     default null               comment '邮箱',
  status            char(1)         default '0'                comment '部门状态（0正常 1停用）',
  del_flag          char(1)         default '0'                comment '删除标志（0代表存在 2代表删除）',
  create_by         varchar(64)     default ''                 comment '创建者',
  create_time 	    datetime                                   comment '创建时间',
  update_by         varchar(64)     default ''                 comment '更新者',
  update_time       datetime                                   comment '更新时间',
  primary key (dept_id)
) engine=innodb auto_increment=200 comment = '部门表';

-- ----------------------------
-- 初始化-部门表数据
-- ----------------------------
INSERT INTO `sys_dept` VALUES (100, 0, '0', '四川中水成勘院测绘工程有限责任公司', 0, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:34:52', NULL, NULL);
INSERT INTO `sys_dept` VALUES (101, 100, '0,100', '董事会', 1, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:34:52', NULL, NULL);
INSERT INTO `sys_dept` VALUES (102, 100, '0,100', '经营管理层', 2, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:36:52', NULL, NULL);
INSERT INTO `sys_dept` VALUES (103, 100, '0,100', '高级管理人员', 3, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:37:52', NULL, NULL);
INSERT INTO `sys_dept` VALUES (104, 100, '0,100', '综合事务部', 4, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:38:16', NULL, NULL);
INSERT INTO `sys_dept` VALUES (105, 100, '0,100', '经营发展部', 5, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:38:32', NULL, NULL);
INSERT INTO `sys_dept` VALUES (106, 100, '0,100', '财务部', 6, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:38:44', NULL, NULL);
INSERT INTO `sys_dept` VALUES (107, 100, '0,100', '激光技术中心', 7, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:39:21', NULL, NULL);
INSERT INTO `sys_dept` VALUES (108, 100, '0,100', '地理信息中心', 8, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:39:31', NULL, NULL);
INSERT INTO `sys_dept` VALUES (109, 100, '0,100', '技术质量与安全部', 9, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:39:50', NULL, NULL);
INSERT INTO `sys_dept` VALUES (110, 100, '0,100', '航测遥感中心', 10, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:40:03', NULL, NULL);
INSERT INTO `sys_dept` VALUES (111, 100, '0,100', '测绘工程中心', 11, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:40:16', NULL, NULL);
INSERT INTO `sys_dept` VALUES (112, 100, '0,100', '工程监测中心', 12, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:40:35', NULL, NULL);
INSERT INTO `sys_dept` VALUES (113, 100, '0,100', '勘察设计事业部', 13, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:40:59', NULL, NULL);
INSERT INTO `sys_dept` VALUES (114, 100, '0,100', '重庆分公司', 14, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:42:31', NULL, NULL);
INSERT INTO `sys_dept` VALUES (115, 100, '0,100', '德方子公司', 15, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:42:56', NULL, NULL);
INSERT INTO `sys_dept` VALUES (116, 100, '0,100', '云南子公司', 16, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:43:16', NULL, NULL);
INSERT INTO `sys_dept` VALUES (117, 100, '0,100', '韶关分公司', 17, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:43:16', NULL, NULL);
INSERT INTO `sys_dept` VALUES (118, 100, '0,100', '佛山分公司', 18, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:43:16', NULL, NULL);
INSERT INTO `sys_dept` VALUES (200, 104, '0,100', '驾驶员', 0, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:38:16', NULL, NULL);
INSERT INTO `sys_dept` VALUES (201, 111, '0,100', '两河口测量中心', 0, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:41:14', NULL, NULL);
INSERT INTO `sys_dept` VALUES (202, 111, '0,100', '双江口测量中心', 1, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:41:14', NULL, NULL);
INSERT INTO `sys_dept` VALUES (203, 111, '0,100', '金川测量中心', 2, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:41:14', NULL, NULL);
INSERT INTO `sys_dept` VALUES (204, 111, '0,100', '巴拉测量中心', 3, NULL, NULL, NULL, '0', '0', 'admin', '2024-01-04 11:41:14', NULL, NULL);

-- ----------------------------
-- 2、用户信息表
-- ----------------------------
drop table if exists sys_user;
create table sys_user (
  user_id           bigint(20)      not null auto_increment    comment '用户ID',
  dept_id           bigint(20)      default null               comment '部门ID',
  user_name         varchar(30)     not null                   comment '用户账号',
  nick_name         varchar(30)     not null                   comment '用户昵称',
  user_type         varchar(2)      default '00'               comment '用户类型（00系统用户）',
  email             varchar(50)     default ''                 comment '用户邮箱',
  phonenumber       varchar(11)     default ''                 comment '手机号码',
  sex               char(1)         default '0'                comment '用户性别（0男 1女 2未知）',
  avatar            varchar(100)    default ''                 comment '头像地址',
  password          varchar(100)    default ''                 comment '密码',
  status            char(1)         default '0'                comment '帐号状态（0正常 1停用）',
  del_flag          char(1)         default '0'                comment '删除标志（0代表存在 2代表删除）',
  login_ip          varchar(128)    default ''                 comment '最后登录IP',
  login_date        datetime                                   comment '最后登录时间',
  create_by         varchar(64)     default ''                 comment '创建者',
  create_time       datetime                                   comment '创建时间',
  update_by         varchar(64)     default ''                 comment '更新者',
  update_time       datetime                                   comment '更新时间',
  remark            varchar(500)    default null               comment '备注（作业类别）',
  pm_level			char(1)			default null			   comment '项目经理级别（0一、1二、2三）',
  titles			char(2)			default null				comment '技术职称（0正高、1副高、2中级、3助工）',
  certificates		varchar(9)		default null				comment '执业证书（0注测、1注规、2注岩、3注安、4注会）',
  engineer_level	char(1)			default null			   comment '工程师岗级（0一级、1二级、2三级、3四级、4五级、5六级）',
  post_level		char(1)			default null			   comment '岗级（0一岗、1二岗、2三岗、3四岗、4五岗、5六岗、6七岗、7八岗）',
  salary_level		char(1)			default null			   comment '薪档（0一级、1二级、2三级、3四级、4五级、5六级、6七级、7八级）',
  operator_level	char(1)			default null			   comment '技工等级（0一级、1二级、2三级）',
  entry_date		date									   comment '入职时间',
  birthday			date									   comment '出生时间',
  age				int											comment '年龄',
  update_reason		char(1) 		default null				comment '更新原因（0误录修改、1正常调整）',
  id_card 			char(18) 		default null				comment '身份证号码',
  native_place 		varchar(50) 	default null				comment '籍贯',
  political_affiliation varchar(5)	default null				comment '政治面貌',
  ethnic 			varchar(5) 		default null				comment '民族',
  graduate_school 	varchar(20) 	default null				comment '毕业院校',
  major 			varchar(20) 	default null				comment '专业',
  degree 			char(1) 		default null				comment '学历',
  contract_sign 	date			default null				comment '合同签订',
  contract_expire 	date			default null				comment '合同期满',
  home_place 		varchar(255) 	default null				comment '家庭住址',
  primary key (user_id)
) engine=innodb auto_increment=1 comment = '用户信息表';

-- ----------------------------
-- 初始化-用户信息表数据
-- ----------------------------
INSERT INTO `sys_user` VALUES (1, 108, 'admin', '管理员', '0', NULL, '15888888888', '1', NULL, '$2a$10$7JB720yubVSZvUI0rEqK/.VqGOZTH.ulu33dHOiBE8ByOhJIrdAu2', '0', '0', '127.0.0.1', '2024-07-02 14:56:55', NULL, '2024-05-14 10:41:32', NULL, NULL, '管理员', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `sys_user` VALUES (2, 101, '13982275233', '刘光庆', '0', NULL, '13982275233', '0', NULL, '$2a$10$Txp.qAGHmK0GTwbTfyl8/.SHMaU/vvkow3JFUAffX/T8LRZkOmqWq', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, NULL, '7', '5', NULL, '1991-07-13', NULL, NULL, NULL, '420111197010024095', '重庆市彭水县', '10', '汉族', '武汉大学', '测绘工程', '2', '2016-01-01', NULL, '成都市青羊区光华街道清江中路65号香格里拉花园');
INSERT INTO `sys_user` VALUES (3, 101, '13808211356', '向发廷', '0', NULL, '13808211356', '0', NULL, '$2a$10$XxEZzRqShD4AWavhpYCkVeHh6sG5ezeQYGUCOaod/rc4AbLSr/Uaq', '2', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '0', NULL, NULL, NULL, NULL, NULL, '1984-02-13', NULL, NULL, NULL, '519003196309166135', '四川省南部县', '2,9', '汉族', '武汉测绘科技大学', '工程测量', '2', '2016-01-01', NULL, '成都市青羊区清江东路186号');
INSERT INTO `sys_user` VALUES (4, 101, '13608089391', '王渊', '0', NULL, '13608089391', '0', NULL, '$2a$10$09XCFc9DQuV2HqEg67kVK.KEHfmkaUJROFb7T7hzt2B.1A9xr2yUG', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '0', NULL, NULL, '6', '6', NULL, '1985-12-25', NULL, NULL, NULL, '510103196508013470', '四川省三台县', '0,10', '汉族', '武汉测绘科技大学', '摄影测量与遥感', '2', '2016-01-01', NULL, '成都市青羊区清江东路186号');
INSERT INTO `sys_user` VALUES (5, 101, '13808210959', '饶兴贵', '0', NULL, '13808210959', '0', NULL, '$2a$10$JPvU4DW4MThpWl6sHLw53uNfDxHJRAD7RvL4JXSflTqJhwahIIBQO', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '0', NULL, NULL, NULL, NULL, NULL, '1983-08-01', NULL, NULL, NULL, '519003196303246134', '湖北省浠水县', '2,10', '汉族', '武汉测绘科技大学', '大地测量', '2', '2016-01-01', NULL, '成都市青羊区府南街道清江东路186号成勘院电梯公寓');
INSERT INTO `sys_user` VALUES (6, 101, '13308085432', '阴学军', '0', NULL, '13308085432', '0', NULL, '$2a$10$4OJNwqNk0N2tw.MW1HtRMuistkjqCb6LRcgs9McKO.3BxS6hYTWqW', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '0', NULL, NULL, '6', '6', NULL, '1990-07-26', NULL, NULL, NULL, '310110196807013258', '四川省内江市', '2,9', '汉族', '西南交通大学', '测绘工程', '1', '2016-01-01', NULL, '成都市青羊区清江东路186号成勘院电梯公寓');
INSERT INTO `sys_user` VALUES (7, 101, '13908178105', '樊宽林', '0', NULL, '13908178105', '0', NULL, '$2a$10$hHfyRhsey5eOi/pfmcnMMu8i6S3JkJ0hPUIaWh9OJ2z9ttWJiIi2.', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '0', NULL, NULL, '6', '6', NULL, '1996-07-25', NULL, NULL, NULL, '510105197509171793', '四川省营山县', '3', '汉族', '武汉大学', '测绘工程', '2', '2016-01-01', NULL, '成都市青羊区金祥路58号中大君悦金沙6期3-2-1403');
INSERT INTO `sys_user` VALUES (8, 104, '18034708068', '徐婷', '0', NULL, '18034708068', '1', NULL, '$2a$10$YGYFXHgA2FUjtZaW70EGwesPUKWYN7AqqWnEsP3yszg6E8afruc8G', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '5', '6', NULL, '2011-03-03', NULL, NULL, NULL, '510802198106144129', '四川省眉山市', '1,5', '汉族', '西华大学', '财务管理', '2', '2015-03-02', NULL, '四川省成都市锦江区牛王庙巷66号');
INSERT INTO `sys_user` VALUES (9, 102, '13880963113', '陈洪', '0', NULL, '13880963113', '0', NULL, '$2a$10$z/mGErvX73FC87CRrcPxTuYYgiiq1OiUiOQlVgrPvphFuT/hjYSx6', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '0', NULL, NULL, '6', '6', NULL, '2001-07-20', NULL, NULL, NULL, '420111197808274173', '西藏拉萨市', '13', '汉族', '西南交通大学', '测绘工程', '1', '2016-01-01', NULL, '成都市天涯石北街20号天涯庭院1单元26号');
INSERT INTO `sys_user` VALUES (10, 102, '13981868188', '刘非', '0', NULL, '13981868188', '0', NULL, '$2a$10$OV2vA6RvBU8yfWGz9.IjROXzE0tbsXZfgQTNbh1VCT1oTre5RTBES', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '0', NULL, NULL, '6', '6', NULL, '1995-07-25', NULL, NULL, NULL, '422323197405160313', '重庆市石柱县', '4', '土家族', '武汉大学', '测绘工程', '2', '2016-01-01', NULL, '成都市青羊区清江东路186号');
INSERT INTO `sys_user` VALUES (11, 102, '13882236733', '杨卫', '0', NULL, '13882236733', '0', NULL, '$2a$10$R1kvR4S1b7Q9ysWkkJ7C7eXFgICfRl6AyHyCT8Y9vgPEaiakJxHJ6', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '0', NULL, NULL, '6', '6', NULL, '2003-07-16', NULL, NULL, NULL, '420623198006060015', '湖北省宜城市', '13', '汉族', '西南交通大学', '测绘工程', '1', '2016-01-01', NULL, '成都市温江区南熏大道二段139号上林宽境南区');
INSERT INTO `sys_user` VALUES (12, 102, '13980583883', '宁瑶', '0', NULL, '13980583883', '0', NULL, '$2a$10$jwyixTJD/48Br21Bn0lfx.b4iDUUGbyQpFa3c7qcoCK537OGl1gPq', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, NULL, NULL, NULL, NULL, '2005-07-01', NULL, NULL, NULL, '420881198311196511', '湖北省钟祥', '13', '汉族', '西南交通大学', '土木工程', '2', '2017-04-01', NULL, ' 成都市温江区德通桥路28号 棠湖泊林小镇');
INSERT INTO `sys_user` VALUES (13, 102, '18190819097', '贾春华', '0', NULL, '18190819097', '0', NULL, '$2a$10$zmfFXk.tGhYUgGE1qiBNc.ygExmFu5agjmwVEDB938cLWf068b8pu', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, NULL, '6', '5', NULL, '2009-07-01', NULL, NULL, NULL, '411024198512283257', '河南省许昌市', '9', '汉族', '西南交通大学', '遥感科学与技术', '2', '2013-07-01', NULL, '成都市温江区西班牙森林');
INSERT INTO `sys_user` VALUES (14, 106, '15928150405', '刘楠', '0', NULL, '15928150405', '0', NULL, '$2a$10$AW1Qc/m1uB9muU/1jG2Y/uhh1uiz6/MHEfKVnwWhh6PFBKbUWjGm.', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '8', NULL, NULL, '6', '5', NULL, '2011-07-14', NULL, NULL, NULL, '410702198807271535', '河南省新乡市', '13', '汉族', '东北师范大学人文学院', '金融学', '2', '2015-07-14', NULL, '成都市金牛区枣子巷13号');
INSERT INTO `sys_user` VALUES (15, 105, '18602830814', '黄梅琳', '0', NULL, '18602830814', '1', NULL, '$2a$10$zyD06LD.N1Va9filuiZ8/eoxXcbZRbUWMV53OcD8VLfM4Xs/pV4xO', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, NULL, NULL, NULL, NULL, '2009-07-01', NULL, NULL, NULL, '510104198608142865', '四川省成都市', '9', '汉族', '四川大学', '工商管理', '1', NULL, NULL, '成都市青羊区金祥路55号凯丽美域');
INSERT INTO `sys_user` VALUES (16, 104, '13683488600', '陈建贤', '0', NULL, '13683488600', '0', NULL, '$2a$10$m9MQN9zlSiaZ/boH7PGjjeBXSf4ksRHsNSDzbmosKS2qhpsNaJ5dW', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '3', '3', NULL, '2007-05-21', NULL, NULL, NULL, '511027197912047294', '四川省简阳市', '13', '汉族', '国家开放大学', '水利水电工程管理', '3', '2012-01-01', NULL, '成都市青羊区青华北一街3号');
INSERT INTO `sys_user` VALUES (17, 104, '13438165216', '张国芳', '0', NULL, '13438165216', '1', NULL, '$2a$10$0KuQ0OZlGhFWZbGL3t1s8.l45/ecvxGdIVtGYoC8FXFwrsbrYnNdy', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, NULL, '3', '6', NULL, '2002-06-01', NULL, NULL, NULL, '452331198112262420', '广西省桂林市', '13', '汉族', '武汉大学', '测绘工程', '2', '2017-01-01', NULL, '成都市青羊区蜀鑫路海亮樾金沙');
INSERT INTO `sys_user` VALUES (18, 104, '15181125323', '简鑫', '0', NULL, '15181125323', '1', NULL, '$2a$10$EeX.MYfDEaIc5XjxJBcnJ.GrP/TY1oG/qdNmXhvFxHjouV6QvHCgi', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '2', '2', NULL, '2021-06-01', NULL, NULL, NULL, '513001199903101022', '四川省达州市', '12', '汉族', '宜宾学院', '应用心理学', '2', '2022-06-01', '2025-05-31', '成都市青羊区鸣翠路1号院');
INSERT INTO `sys_user` VALUES (19, 104, '13378256139', '谢辉波', '0', NULL, '13378256139', '0', NULL, '$2a$10$PJ4LqpBpny216Si34DlKPeIkoFP5xdvL/SBLB4v5eozd18VfNL5mm', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '0', '1', NULL, '2023-04-17', NULL, NULL, NULL, '510522199901164130', '四川省泸州市', '9', '汉族', '成都文理学院', '休闲体育', '2', '2023-04-17', '2024-04-16', '四川省成都市青羊区府南街道战旗东路战旗社区9号院');
INSERT INTO `sys_user` VALUES (20, 105, '13550342375', '李胜才', '0', NULL, '13550342375', '0', NULL, '$2a$10$q7BJ2CI/X/AL3hseBTm7Z.CCtvLr.NeI/OwZOICdtxd13RznKX.HK', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, NULL, '4', '5', NULL, '1996-07-29', NULL, NULL, NULL, '420111197511044131', '吉林省长春市', '9', '汉族', '武汉大学', '测绘工程', '2', '2016-01-01', NULL, '四川省成都市温江区海科路东段519号水韵尚城3栋2单元1403号');
INSERT INTO `sys_user` VALUES (21, 105, '13568885428', '杨俊', '0', NULL, '13568885428', '0', NULL, '$2a$10$yW3z4U6JdMGo3n6poXtruu16VL.KcDXKl41Pz/xdHTQo4dTEfvjlK', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, NULL, '4', '4', NULL, '2011-07-05', NULL, NULL, NULL, '511623198911083017', '四川省广安市', '13', '汉族', '四川大学', '土木工程', '2', '2015-07-05', NULL, '成都市温江区共和路800号恒大未来城1期7栋3002');
INSERT INTO `sys_user` VALUES (22, 105, '13882200825', '夏夏', '0', NULL, '13882200825', '1', NULL, '$2a$10$oahcLiTjDkt6kH/89FuyOOAVtngZOq61XBFNQ75tH1f4fA1p0y4yu', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, NULL, '3', '5', NULL, '2005-05-01', NULL, NULL, NULL, '420502198101064826', '湖北省宜昌市', '13', '汉族', '国家开放大学', '计算机科学与技术', '2', '2016-01-01', NULL, '成都市青羊区小南街69号长城园 3栋3单元3302号');
INSERT INTO `sys_user` VALUES (23, 105, '18373705527', '柯枭', '0', NULL, '18373705527', '1', NULL, '$2a$10$087ftY2N01MRLXtnmbiFi.5BkERRdJjhgN2dvK.9NKLGaUW5Ng8je', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, NULL, '3', '3', NULL, '2018-06-10', NULL, NULL, NULL, '511325199401115446', '新疆阿克苏市', '7', '汉族', '湖南城市学院', '测绘工程', '2', '2022-06-10', NULL, '成都市温江区星光华印象');
INSERT INTO `sys_user` VALUES (24, 105, '18202833529', '黎超', '0', NULL, '18202833529', '0', NULL, '$2a$10$XpcXQUUnBGUEy69FOaxIfuUBelPd2WdrdcQ15BacdyD5/0Vg0xeY.', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, NULL, '3', '3', NULL, '2020-01-30', NULL, NULL, NULL, '510131199008082719', '四川省蒲江县', '13', '汉族', '西南科技大学', '采矿工程', '2', '2021-01-30', '2024-01-29', '成都市温江区江安路199号千禧河畔A区');
INSERT INTO `sys_user` VALUES (25, 105, '13111885671', '刘兴', '0', NULL, '13111885671', '0', NULL, '$2a$10$IKwUUqIkWmYEZj876F9r8elhBg3Rk4z9Qipc11gCn9Uo90nF5ekhi', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '0', NULL, '2021-03-22', NULL, NULL, NULL, '513822199803237198', '四川省仁寿县', '12', '汉族', '四川城市职业学院', '工程测量技术', '3', '2022-03-22', '2025-03-21', '成都市龙泉驿区西河镇慧生时代广场');
INSERT INTO `sys_user` VALUES (26, 105, '18782949671', '梁洁', '0', NULL, '18782949671', '1', NULL, '$2a$10$EL2e6Yli8VlZknXAtB4YGetc5a/sW0nKXuklfzaoG9yvf6etWM66y', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, NULL, '2', '3', NULL, '2022-04-01', NULL, NULL, NULL, '510182198907091024', '四川省彭州市', '13', '汉族', '四川农业大学', '工商管理', '2', '2023-04-01', '2026-03-31', '青羊区光华北五路128号');
INSERT INTO `sys_user` VALUES (27, 105, '18681251027', '高天沄', '0', NULL, '18681251027', '0', NULL, '$2a$10$LDM/SHOVhnmnivDC16gwte.Lnw/OlOj1atnmx2BvF8rhWeulXGJu2', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '0', NULL, '2023-02-03', NULL, NULL, NULL, '510802199610274154', '四川省成都市', '12', '汉族', '中国民用航空飞行学院', '空中乘务', '3', '2023-02-03', '2024-02-02', '四川省成都市青羊区家园路九号中华家园23-1-14');
INSERT INTO `sys_user` VALUES (28, 106, '18780223280', '周文婷', '0', NULL, '18780223280', '1', NULL, '$2a$10$YAQloGwpfHGePtn7wSKoNeLpbkn1eqDRlKhJiZecDl4HdjkqT0nbK', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '5', NULL, NULL, '4', '4', NULL, '2013-07-02', NULL, NULL, NULL, '513021199201161384', '四川省达州市', '13', '汉族', '西南财经大学', '会计学', '2', '2017-07-02', NULL, '成都市青羊区光华东四路78号东原时光道');
INSERT INTO `sys_user` VALUES (29, 106, '18202802155', '彭敏', '0', NULL, '18202802155', '1', NULL, '$2a$10$27NwNjW2GIpmtDpRq39SG.LykMUxdhCIsWXu2kveW.GPoXAwSeNji', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '5', NULL, NULL, '3', '4', NULL, '2019-06-01', NULL, NULL, NULL, '51112319921010146x', '四川省乐山市', '13', '汉族', '成都信息工程学院银杏酒店管理学院', '财务管理', '2', '2022-06-01', '2025-05-31', '成都市金牛区两河西二路69号河滨森邻D区');
INSERT INTO `sys_user` VALUES (30, 106, '13699682119', '苟丹', '0', NULL, '13699682119', '1', NULL, '$2a$10$ZaD0Px8ltJBUgR0QtGPY6uO0Sw2mK1SRxXUP7CIt47exUyZmPvu9O', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '6', NULL, NULL, '2', '4', NULL, '2019-08-01', NULL, NULL, NULL, '511304199702114349', '四川省南充市', '12', '汉族', '四川城市职业学院', '会计电算化', '3', '2021-08-01', NULL, '成都市金牛区营门口路48号熙城国际');
INSERT INTO `sys_user` VALUES (31, 106, '15102831685', '宋丹丹', '0', NULL, '15102831685', '1', NULL, '$2a$10$Kr3b5zdATAOBOW0qcVdREOcx9c725jS3DpQN6vrjmNM4ZRq6VAmEC', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '6', NULL, NULL, '1', '0', NULL, '2022-01-27', NULL, NULL, NULL, '430703199406089585', '湖南省常德市', '13', '回族', '西南科技大学', '会计', '3', '2023-01-27', '2026-01-26', '四川省成都市金牛区西安路街道永陵路29号');
INSERT INTO `sys_user` VALUES (32, 107, '18280462009', '刘媛媛', '0', NULL, '18280462009', '1', NULL, '$2a$10$8Z8rmEVqyzetlqoVJ50aYOb8EUWOOx0lje8wWPXEFQzncGs30cE6q', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, NULL, '5', '5', NULL, '2012-07-09', NULL, NULL, NULL, '421127198808080965', '湖北省黄冈市', '10', '汉族', '武汉大学', '测绘工程', '1', '2016-07-05', NULL, '四川省成都市温江区清泉北街66号中新公园大道');
INSERT INTO `sys_user` VALUES (33, 107, '18200194440', '吴振', '0', NULL, '18200194440', '0', NULL, '$2a$10$kOcMJSSEN5V1/hA2sDC.hukGYR7NHBGYgm6NU/VA.san6IcbBmUma', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, NULL, '5', '4', NULL, '2011-07-05', NULL, NULL, NULL, '211221198911072419', '辽宁省铁岭市', '13', '汉族', '国家开放大学', '土木工程', '2', '2015-07-05', NULL, '成都市青羊区光华北路一号东原时光道二期');
INSERT INTO `sys_user` VALUES (34, 107, '15892280776', '王刚', '0', NULL, '15892280776', '0', NULL, '$2a$10$qslnVyveZOgKwtmmboHDeeJv6cC8b.wfASpV2SjuJc.tnJF4qPcsS', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '7', NULL, '2019-09-24', NULL, NULL, NULL, '510802199510070437', '四川省广元市', '13', '汉族', '内江师范学院', '测绘工程', '2', '2023-09-24', NULL, '四川省成都市金牛区西安路街道文化路15号院');
INSERT INTO `sys_user` VALUES (35, 107, '18140026972', '朱倪强', '0', NULL, '18140026972', '0', NULL, '$2a$10$3Z44xOpRy8/22xZo3camuO/SfNasAO.ogjjuvn9eGc4EXuX29fri2', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '3', '3', '4', NULL, '2019-05-25', NULL, NULL, NULL, '510124199312202638', '四川省成都市', '13', '汉族', '山东理工大学', '测绘工程', '2', '2023-05-25', NULL, '四川省成都市郫都区德源镇胜利北街149号怡丽佳苑');
INSERT INTO `sys_user` VALUES (36, 107, '18408248664', '李圆', '0', NULL, '18408248664', '1', NULL, '$2a$10$Or/kNE3LNFwVQhpLNAahLOF80HqlBeapdu07HKK9I1rED/kFgRp5K', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '3', '3', '3', NULL, '2020-08-24', NULL, NULL, NULL, '51340119940704282X', '四川省西昌市', '10', '汉族', '西南交通大学', '测绘工程', '1', '2021-08-24', '2024-08-23', '四川省成都市成华区万年场街道槐树店一路300号');
INSERT INTO `sys_user` VALUES (37, 107, '18783205676', '李泳龙', '0', NULL, '18783205676', '0', NULL, '$2a$10$abJDD/xhstEHkM0CGe4VT.8KJ3XaAKT.G9TLptxSKeJwxVbo9GiOS', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '2', NULL, '2019-07-01', NULL, NULL, NULL, '511024199805222552', '四川省内江市', '12', '汉族', '四川水利职业技术学院', '工程测量技术', '3', '2021-07-01', NULL, '成都市温江区花土路合能珍宝琥珀');
INSERT INTO `sys_user` VALUES (38, 107, '13684023317', '唐伟', '0', NULL, '13684023317', '0', NULL, '$2a$10$Ik4gwsPn3sLz1cpW1w1KKufLjFcJ/ksl4Zhj9Dtjkx7/lY4eXZRL2', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, NULL, NULL, NULL, NULL, '2024-04-12', NULL, NULL, NULL, '513822198908013196', '四川省仁寿县', '13', '汉族', '成都信息工程学院', '遥感科学与技术', '2', '2024-04-12', '2025-04-11', '成都市高新区荟锦路33号');
INSERT INTO `sys_user` VALUES (39, 108, '13402863790', '何杰', '0', NULL, '13402863790', '0', NULL, '$2a$10$jIPUDctnSNeCZenurHTExOhihrxAwdx1SOsuKOoQ17KVSEhS4ork.', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, NULL, '5', '5', NULL, '2010-07-21', NULL, NULL, NULL, '510181198611166115', '四川省眉山市', '6', '汉族', '西南科技大学', '计算机科学与技术', '2', '2014-07-19', NULL, '四川省成都市温江区江浦路288号');
INSERT INTO `sys_user` VALUES (40, 108, '18224091291', '杨玉婧', '0', NULL, '18224091291', '1', NULL, '$2a$10$L3TZedLjQfMitGpaZCY4YuVzHvHtYI0UgCsUB4NzV19RLntscMymW', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, NULL, '2', '6', NULL, '2019-09-23', NULL, NULL, NULL, '511602199507207404', '四川省广安市', '10', '汉族', '西南交通大学', '土木工程', '2', '2023-09-23', NULL, '四川省成都市金牛区金科苑4区');
INSERT INTO `sys_user` VALUES (41, 108, '15196615885', '余思翰', '0', NULL, '15196615885', '1', NULL, '$2a$10$wo2h3hpTUUXbZZhpvxC9Se0x.C5XbiP39etFUT7F728xe5AWealW.', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, NULL, '2', '5', NULL, '2020-08-24', NULL, NULL, NULL, '51162219960108432X', '四川省武胜县', '13', '汉族', '西南科技大学', '计算机科学与技术', '2', '2021-08-24', '2024-08-23', '四川省成都市金牛区抚琴东南路10号2单元702');
INSERT INTO `sys_user` VALUES (42, 108, '17716873691', '阮梦妍', '0', NULL, '17716873691', '1', NULL, '$2a$10$U42RXEyCC4Esv5IIn6mBo.pkauJpk0ZF6Ex32liU0L5CPhBsb2NRm', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, NULL, '2', '4', NULL, '2020-08-24', NULL, NULL, NULL, '510108199810241525', '四川省成都市', '12', '汉族', '成都信息工程大学', '地理信息科学', '2', '2021-08-24', '2024-08-23', '四川省成都市成华区地勘路春熙苑1期1-4-8-31');
INSERT INTO `sys_user` VALUES (43, 108, '15881196342', '赵芩', '0', NULL, '15881196342', '1', NULL, '$2a$10$USH/HIanoHKiCl6KLs4NHOO4YUwPOhOx35zHQ7Lv69JR.zLtKBEfC', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '3', '3', '4', NULL, '2021-12-06', NULL, NULL, NULL, '513701199410120047', '四川省成都市', '13', '汉族', '成都理工大学', '测绘工程', '1', '2022-12-06', '2025-12-05', '龙泉驿区龙城大道保利玫瑰花语');
INSERT INTO `sys_user` VALUES (44, 108, '18502889383', '王荣华', '0', NULL, '18502889383', '0', NULL, '$2a$10$ES427AeNTaLUx9souQVCSuz/4IqWxgCpFHpKKo6ZDKX2Wh.qKSTt2', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '3', '4', NULL, '2022-05-18', NULL, NULL, NULL, '513030199410058611', '成都市锦江区', '13', '汉族', '四川师范大学', '地图学与地理信息系统', '1', '2023-05-18', '2026-05-17', '成都市郫都区蜀都生资市场9栋403');
INSERT INTO `sys_user` VALUES (45, 108, '19982093641', '屈亚星', '0', NULL, '19982093641', '1', NULL, '$2a$10$DOdj4k9J234saeC08Gym.ug4RqF/RnFdKkFmg37BxLMwkiTaTupYO', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '2', '2', NULL, '2022-10-07', NULL, NULL, NULL, '510125200009090428', '四川省成都市', '12', '汉族', '西南科技大学', '地理信息科学', '2', '2023-10-07', '2026-10-06', '成都市青羊区草堂街道清江东路11号成勘院浣花小区');
INSERT INTO `sys_user` VALUES (46, 109, '13880509805', '吴凯', '0', NULL, '13880509805', '0', NULL, '$2a$10$HdI.PHZWJlgQOM59/5iqnu0ZFX4lJCHb9T0X424QyLULsuUyyyG.W', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '0', NULL, NULL, '5', '7', NULL, '2001-07-18', NULL, NULL, NULL, '510322197710140339', '四川省成都市', '13', '汉族', '河海大学', '测量工程', '2', '2016-01-01', NULL, '青羊区清江东路186号成勘院电梯公寓12栋5楼1号');
INSERT INTO `sys_user` VALUES (47, 109, '13882148315', '陈尚云', '0', NULL, '13882148315', '0', NULL, '$2a$10$8HPMYnbcfBhgLFHVmcbzB.BpYyoAnmI7I15UFVy.gmNhblmWEwx0S', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '0', NULL, NULL, NULL, NULL, NULL, '1983-02-07', NULL, NULL, NULL, '510103196402083454', '四川省眉山市', '10', '汉族', '武汉测绘科技大学', '摄影测量与遥感', '2', '2016-01-01', NULL, '成都市青羊区清江东路成勘院电梯公寓');
INSERT INTO `sys_user` VALUES (48, 109, '13708077449', '马如坤', '0', NULL, '13708077449', '0', NULL, '$2a$10$7hSRqLaFezX8WKZUKTFOR.C6UKR5RzL6EkkIsMRtN1Jqwvz2opffS', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '0', NULL, NULL, '6', '4', NULL, '1986-06-29', NULL, NULL, NULL, '370902196411151210', '四川省都江堰市', '10', '汉族', '山东矿业学院', '工程测量', '1', '2016-01-01', NULL, '成都市青羊区府南街道清江东路186号成勘院电梯公寓');
INSERT INTO `sys_user` VALUES (49, 109, '13981911565', '李旭', '0', NULL, '13981911565', '0', NULL, '$2a$10$IFZVnYf7cLcBdhC4CZhynOs3UhF4P89BQpSm8MBcobT0XXeOMV0MO', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '0', NULL, NULL, '5', '7', NULL, '1985-02-08', NULL, NULL, NULL, '510103196501153438', '重庆市黔江', '9', '土家族', '武汉测绘科技大学', '测量工程', '2', '2016-01-01', NULL, '成都市青羊区清江东路186号');
INSERT INTO `sys_user` VALUES (50, 109, '13684088875', '张进', '0', NULL, '13684088875', '0', NULL, '$2a$10$i59KQS18N9HU2om/9KMmQeGemYzsgnPYqYuJ6ScR8InyHCVoQ1wYy', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '0', NULL, NULL, '5', '5', NULL, '1994-07-21', NULL, NULL, NULL, '410103197211161350', '四川省成都市', '13', '汉族', '武汉大学', '测绘工程', '2', '2016-01-01', NULL, '成都市温江区海科路东段519号水韵尚城11栋2001号');
INSERT INTO `sys_user` VALUES (51, 109, '13550225550', '冉洪芳', '0', NULL, '13550225550', '1', NULL, '$2a$10$SXdj6bvRnasrgLNODw0LSehST5N6EN7KSrZOVatU43Rfs/1pkvUli', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, NULL, '4', '5', NULL, '2000-07-16', NULL, NULL, NULL, '510129197611062527', '四川省成都市', '13', '汉族', '武汉测绘科技大学', '摄影测量与遥感', '2', '2016-01-01', NULL, '成都市青羊区金鹏街109号金沙西园四期');
INSERT INTO `sys_user` VALUES (52, 109, '13880738350', '周文婷', '0', NULL, '13880738350', '1', NULL, '$2a$10$WB.NS6/xUuPbQcfCq.Vhju9hBgnNTU8AdfIlQFoJtbkEFlZfJCjzy', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, '3', '3', '7', NULL, '2003-04-01', NULL, NULL, NULL, '422322198209230087', '湖北省嘉鱼县', '13', '汉族', '西南交通大学', '土木工程', '2', '2017-01-01', NULL, '成都市武侯区石羊街道南三环五段188号美洲花园小区');
INSERT INTO `sys_user` VALUES (53, 109, '13558636992', '谭君', '0', NULL, '13558636992', '1', NULL, '$2a$10$6nV5Ln3qVV0gZFSQ.bC.SObNSOycCpJVmM9/2ZLRMKqtNXM6Sl2qS', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, '2', '4', '4', NULL, '1991-07-13', NULL, NULL, NULL, '420111197101174021', '重庆市开州区', '13', '汉族', '武汉大学', '测绘工程', '2', '2016-01-01', NULL, '成都市温江区光华大道118号仁和春天大道');
INSERT INTO `sys_user` VALUES (54, 109, '13658078979', '王晶丽', '0', NULL, '13658078979', '1', NULL, '$2a$10$A3IyBHGPCetKOBY6ZRD7b.Gw3P8ChWEH9eZbFN8iwFrQ97.rDvcEO', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, '2', '2', NULL, NULL, '3', '6', NULL, '2008-07-01', NULL, NULL, NULL, '53011119760531656X', '吉林省四平市', '13', '汉族', '武汉大学', '工程测量技术', '3', '2016-07-01', NULL, '成都市青羊区光华北一路培华段399号金阳宜诚国际');
INSERT INTO `sys_user` VALUES (55, 109, '13488986700', '罗业华', '0', NULL, '13488986700', '0', NULL, '$2a$10$8VMAWj0OrUynUbW5k0Gy1egnO.yblhCvHzRB1K7KZLHGBG0e38ki2', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '2', '4', '3', NULL, '2011-07-05', NULL, NULL, NULL, '511523198905280035', '四川省宜宾市', '13', '汉族', '西南交通大学', '工程造价', '2', '2013-07-03', NULL, '成都市成华区东丽街58号首创光合城');
INSERT INTO `sys_user` VALUES (56, 109, '13540297596', '郎悟灵', '0', NULL, '13540297596', '1', NULL, '$2a$10$1IlnRx/FUq7.ob3FC9KNyurA4rwVDh/P8T0lrc79yUYXSnafdvqf.', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, '3', '3', '6', NULL, '2012-07-06', NULL, NULL, NULL, '652801198611210568', '重庆丰都县', '10', '汉族', '西南交通大学', '摄影测量与遥感', '1', '2016-07-08', NULL, '四川省成都市青羊区成飞大道南段383号中铁瑞景颐和城');
INSERT INTO `sys_user` VALUES (57, 109, '18030862435', '黄俊峰', '0', NULL, '18030862435', '0', NULL, '$2a$10$yqCYXgHeWb0ZySk0fZTgMegw.n1fY2KnuWG4MBw6Mh/4HWJigl3Nq', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, NULL, '3', '3', NULL, '2022-09-30', NULL, NULL, NULL, '510232197310131115', '四川省成都市', '13', '汉族', '四川大学', '水利工程领域工程', '1', '2023-09-30', '2026-09-29', '成都市武侯区高升桥南街2号3栋');
INSERT INTO `sys_user` VALUES (58, 109, '13678018998', '张明勇', '0', NULL, '13678018998', '0', NULL, '$2a$10$5an7Wz0MFs/AR3SFEU2pWuRRtHgMoyBtPZga.seyQDe22MMlS2RzS', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '10', NULL, NULL, '4', '3', NULL, '1996-04-30', NULL, NULL, NULL, '513022197711155010', '四川省巴中市', '13', '汉族', '中央广播电视大学', '法学', '3', '2016-01-01', NULL, '成都市犀浦镇两河东路190号万科城臻园12栋2单元503号');
INSERT INTO `sys_user` VALUES (59, 110, '18828096127', '朱静', '0', NULL, '18828096127', '0', NULL, '$2a$10$ju3H8kmcCPBWHQgR8kbMhOvH6WRiF9FCWd2/2BiPFUkf15hS921j2', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, NULL, '5', '5', NULL, '2011-07-01', NULL, NULL, NULL, '500109198507267511', '重庆市北碚区', '10', '汉族', '重庆大学', '测绘工程', '2', '2015-07-01', NULL, '成都市温江区柳城街道德通桥路26号泊林小镇');
INSERT INTO `sys_user` VALUES (60, 110, '18782047395', '雷情情', '0', NULL, '18782047395', '1', NULL, '$2a$10$QgfK66AJR0hfJvG5SN2c7.vKUuy/MBoezX9Ade3MhRvj13zmp97F.', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, NULL, '4', '3', NULL, '2019-06-13', NULL, NULL, NULL, '511602199409298461', '四川省广安市', '13', '汉族', '长安大学', '自然地理与资源环境', '2', '2023-06-13', NULL, '成都市锦江区中环路锦绣大道段锦江国际花园');
INSERT INTO `sys_user` VALUES (61, 110, '15881027005', '赵洪', '0', NULL, '15881027005', '0', NULL, '$2a$10$PiM2Mwc1B5086626PWDAGehZWQgSoK/nE3sAksaY8PKIhb5gDLFFS', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, NULL, '4', '6', NULL, '2011-07-05', NULL, NULL, NULL, '510922198903013253', '四川省射洪县', '10', '汉族', '西南交通大学', '土木工程', '2', '2013-07-05', NULL, '四川省成都市青羊区大庆路74号');
INSERT INTO `sys_user` VALUES (62, 110, '13668275672', '刘向东', '0', NULL, '13668275672', '0', NULL, '$2a$10$js8/PglLkF9rjBfi.NOHqOS3IlGX.BET9sGbSGviCkvfjr4h.padi', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, '2', '4', '4', NULL, '1994-07-16', NULL, NULL, NULL, '410103197308021311', '四川省成都市', '13', '汉族', '武汉大学', '测绘工程', '2', '2016-01-01', NULL, '成都市龙泉驿区龙泉街道东山国际E区');
INSERT INTO `sys_user` VALUES (63, 110, '13880738396', '徐志勇', '0', NULL, '13880738396', '0', NULL, '$2a$10$n5wosgfrd.S6oQN1aB5YpuBq9UfgsyraQkFE.BqKsjSSKNM3h8Bdq', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '3', '3', '4', NULL, '2022-03-21', NULL, NULL, NULL, '420124198206013917', '成都市青羊区', '13', '汉族', '西南大学', '土木工程', '2', '2023-03-21', '2026-03-20', '成都市青羊区贝森南路8号');
INSERT INTO `sys_user` VALUES (64, 110, '15828108217', '李敏', '0', NULL, '15828108217', '1', NULL, '$2a$10$FDgxnBR.GY6w6/0qVfBkoebsRbrJuHOR.0zJMCDPClAZ69ilZusMu', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '3', '3', '6', NULL, '2010-07-19', NULL, NULL, NULL, '142701198909141248', '山西省运城市', '8', '汉族', '中国人民解放军炮兵学院南京分院', '计算机科学与技术', '2', '2014-07-17', NULL, '成都市温江区海科路东段519号水韵尚城15栋801');
INSERT INTO `sys_user` VALUES (65, 110, '13689063294', '何玲', '0', NULL, '13689063294', '1', NULL, '$2a$10$GuZagIP4q93YIIt4G9/a5enhLPt8HG/MxAQ0XqTN1wCInCPQ/GEve', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '3', '3', '6', NULL, '2012-03-02', NULL, NULL, NULL, '511325198812030928', '四川省南充市', '13', '汉族', '西南交通大学', '土木工程', '2', '2016-03-02', NULL, '四川省成都市温江区江浦路288号');
INSERT INTO `sys_user` VALUES (66, 110, '15982266763', '谭天宇', '0', NULL, '15982266763', '0', NULL, '$2a$10$JupV2gsWkcgd49ZiyXWZvOnOI70X4alFOz.pZlZyR0vlyquKcYmSy', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '4', NULL, '2019-07-01', NULL, NULL, NULL, '513721199610044195', '四川省巴中市', '12', '汉族', '四川水利职业技术学院', '测绘地理信息技术', '3', '2023-07-01', NULL, '成都市金牛区银杏路4号');
INSERT INTO `sys_user` VALUES (67, 110, '18384964273', '李丽昕', '0', NULL, '18384964273', '1', NULL, '$2a$10$mhYgVFcZwCIoNvrQJgMe9O1UcxrJFnCLc0HEbQfY/uPUqYtB.mWsu', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '3', NULL, '2019-07-01', NULL, NULL, NULL, '51102519981206582x', '四川省内江市', '12', '汉族', '四川水利职业技术学院', '摄影测量与遥感技术', '3', '2021-07-01', NULL, '成都市双流区九江街道石井社区二组');
INSERT INTO `sys_user` VALUES (68, 110, '15108259951', '陈波', '0', NULL, '15108259951', '0', NULL, '$2a$10$p4UrURwX/V6Lm.l/PExIO.T7pt9JlZkypXgvKx3owFy6e6e6tp0iC', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, '3', '3', '4', NULL, '2019-06-13', NULL, NULL, NULL, '511322198902237819', '四川省南充市', '13', '汉族', '成都信息工程大学', '遥感科学与技术', '2', '2023-06-13', NULL, '成都市高新区新上街151号A幢');
INSERT INTO `sys_user` VALUES (69, 110, '18483229925', '张敏', '0', NULL, '18483229925', '1', NULL, '$2a$10$T4wAUmJdhwLoeT1An3JqDusftj2XOYlcoZntVzCssOT9i/DRhpc2.', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '7', NULL, '2019-09-24', NULL, NULL, NULL, '51162319950917170x', '四川省广安市', '10', '汉族', '内江师范学院', '测绘工程', '2', '2023-09-24', NULL, '成都市金牛区西安路街道文华路15号院');
INSERT INTO `sys_user` VALUES (70, 110, '15308209119', '李磊', '0', NULL, '15308209119', '0', NULL, '$2a$10$OpSCDgQSt0WY2DTeL95QsuuI31vg8B.H7QfXRZt94Ft9TjRBAckSK', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '3', '3', '4', NULL, '2012-11-01', NULL, NULL, NULL, '210624198805037812', '辽宁省凌源市', '13', '汉族', '武汉大学', '测绘工程', '2', '2021-05-01', NULL, '成都市温江区光华大道1333号依云镇');
INSERT INTO `sys_user` VALUES (71, 110, '18190687602', '杨为康', '0', NULL, '18190687602', '0', NULL, '$2a$10$XnffnO7hASO3Um/IMHK/becjS1VvFg.4tWqFB6xM1Za0SBFl62CY.', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, '1', '2', NULL, NULL, '4', '3', NULL, '2019-08-26', NULL, NULL, NULL, '532927199109180910', '云南省大理市', '13', '汉族', '西南交通大学', '土木工程', '2', '2023-08-26', NULL, '四川省成都市高新西区合作街道龙城高新天地3栋二单元1766号');
INSERT INTO `sys_user` VALUES (72, 110, '18048613219', '刘轩庭', '0', NULL, '18048613219', '0', NULL, '$2a$10$twHPkz03NX3/E0xtmx.F7uuTi8l.AxLbGKL0ndo7WQUVvCd9FO1oK', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, '2', '3', NULL, NULL, '3', '4', NULL, '2021-09-08', NULL, NULL, NULL, '513822199204048934', '四川省仁寿县', '13', '汉族', '西南科技大学', '交通工程', '2', '2022-09-08', '2025-09-07', '四川省成都市武侯区晋阳街道红运花园');
INSERT INTO `sys_user` VALUES (73, 110, '18482156612', '廖友福', '0', NULL, '18482156612', '0', NULL, '$2a$10$kf8vcylEjp2E0/znQ2v15.diFx4xqPE1tv0VnfnTE04jcK5/s3N8S', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '6', NULL, '2018-10-03', NULL, NULL, NULL, '513029199610124278', '四川省达州市', '12', '汉族', '西华大学', '土木工程', '2', '2022-10-03', NULL, '四川省达州市大竹县竹阳镇学府路惠民小区');
INSERT INTO `sys_user` VALUES (74, 110, '13880417112', '潘林海', '0', NULL, '13880417112', '0', NULL, '$2a$10$OtXij7iRbnOlOuMXAFc4K.rEwEO4FjEa9TvuEraFtOoX/KZCUS.YK', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '4', '2', '6', NULL, '1997-12-01', NULL, NULL, NULL, '510105197807111772', '吉林省扶余市', '9', '汉族', '武汉大学', '工程测量技术', '3', '2016-01-01', NULL, '四川省成都市青羊区浣花北路一号13栋3单元502');
INSERT INTO `sys_user` VALUES (75, 110, '13518119939', '邓锡全', '0', NULL, '13518119939', '0', NULL, '$2a$10$.HLmQ.2lSPtoFndXPwM8Ge7bkkTTdh48FU4fd3zwEMIXSAz/8PNXG', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '2', NULL, '2004-06-01', NULL, NULL, NULL, '511121197304061516', '四川省仁寿县', '13', '汉族', NULL, NULL, '4', '2017-04-01', NULL, '眉山市东坡区裴城路双赋园A区');
INSERT INTO `sys_user` VALUES (76, 110, '15208122776', '张杰', '0', NULL, '15208122776', '0', NULL, '$2a$10$Ajd7bCyQxw0Iy7dbkN02f.k3B3I/e/IbxAKdKWlWIsiaoDQqnNONe', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '3', '3', '4', NULL, '2021-10-28', NULL, NULL, NULL, '500239198710080211', '重庆市黔江区', '13', '土家族', '长春工程学院', '测绘工程', '2', '2022-10-28', '2025-10-27', '成都市蜀西环街59号青房尚瑞天韵1-1-2105');
INSERT INTO `sys_user` VALUES (77, 110, '17345094889', '廖双', '0', NULL, '17345094889', '0', NULL, '$2a$10$UuRKlqbQGRWcfxuI5vudR.p4GjGXFPCLhjBJlFTaY6EbVvMuVngvm', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '0', NULL, '2022-10-08', NULL, NULL, NULL, '500230200102060279', '重庆市丰都县', '12', '汉族', '四川水利职业技术学院', '工程测量技术', '3', '2023-10-08', '2026-10-07', '成都市金牛区茶店子西街金璐天下36号');
INSERT INTO `sys_user` VALUES (78, 110, '15520996706', '廖吉兴', '0', NULL, '15520996706', '0', NULL, '$2a$10$kXWC8nSas7TnOC/YvwjnTOmd7PUVaaKwTiD2TuyTwWvQl1cQPYzZ.', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '0', '1', NULL, '2023-06-01', NULL, NULL, NULL, '511123198706040475', '四川省犍为县', '13', '汉族', NULL, NULL, NULL, '2023-06-01', '2024-05-31', '四川省乐山市犍为县玉津镇机场村5组8号');
INSERT INTO `sys_user` VALUES (79, 110, '15692823805', '王海宾', '0', NULL, '15692823805', '0', NULL, '$2a$10$lw/hTY.2CP7g5ma/YCD41OtFqqlmXhhkWU7uEZOm.r4cBq61aCj4y', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '0', '1', NULL, '2023-10-17', NULL, NULL, NULL, '511321200209156555', '四川省南部县', '12', '汉族', '天府新区通用航空职业学院', '无人机应用技术', '3', '2023-10-17', '2024-10-16', '成都青羊区青羊大道光华馨地11栋4单元1038');
INSERT INTO `sys_user` VALUES (80, 110, '18408201550', '邹帅民', '0', NULL, '18408201550', '0', NULL, '$2a$10$BUDH8nDTsJ/PetXC3Tb9Ae/JyO0kjbxlwMm0nJiLTSUHR1W3VfI0a', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, '2', '3', NULL, NULL, '3', '6', NULL, '2017-06-27', NULL, NULL, NULL, '510321199601211831', '四川省自贡市', '13', '汉族', '西南大学', '土地资源管理', '2', '2021-06-27', NULL, ' 自贡市贡井区贡兴路西城一号8栋140号');
INSERT INTO `sys_user` VALUES (81, 110, '18780290087', '苟旭', '0', NULL, '18780290087', '0', NULL, '$2a$10$U4SiGPDcAL4xLAnwZH3zIeg.SXJZ/RGUxuAFXlhNs9L9fr/d6Buhm', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, '2', '2', NULL, NULL, '3', '6', NULL, '2019-08-29', NULL, NULL, NULL, '513723199309058670', '四川省巴中市', '13', '汉族', '电子科技大学', '软件工程', '2', '2023-08-29', NULL, '成都市金牛区金泉街道金科苑四区');
INSERT INTO `sys_user` VALUES (82, 110, '18483229950', '唐浩', '0', NULL, '18483229950', '0', NULL, '$2a$10$Gkg4z66R9HE5xpdS8EYHw.Ewel2YA5n7CltcTKIkU7d.INkB517Z2', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '6', NULL, '2019-09-24', NULL, NULL, NULL, '511623199702113931', '四川省广安市', '12', '汉族', '内江师范学院', '测绘工程', '2', '2023-09-24', NULL, '四川省成都市新都区八二一小区');
INSERT INTO `sys_user` VALUES (83, 111, '13540773353', '杨振', '0', NULL, '13540773353', '0', NULL, '$2a$10$eJV9RhF9GFm0a/DzMvVZn.66e/v/cp1C.MdZ96V/.6WcJBZv4.H0C', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, NULL, '5', '5', NULL, '2012-08-07', NULL, NULL, NULL, '511321199402060015', '四川省南充市', '13', '汉族', '西南交通大学', '土木工程', '2', '2016-08-07', NULL, '四川省成都市金牛区茶店子路1号顶峰水岸汇景9-2-1203');
INSERT INTO `sys_user` VALUES (84, 111, '18380220140', '甘雨婷', '0', NULL, '18380220140', '1', NULL, '$2a$10$sHIQ5xqAjUYgzCvrGs0Jy.iLHCqyOOBOLk1VOUR1rIafdkr7gt2Xa', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, NULL, '4', '5', NULL, '2017-07-05', NULL, NULL, NULL, '511011199412182527', '四川省内江市', '13', '汉族', '成都理工大学', '地理信息科学', '2', '2021-07-05', NULL, '成都市成华区龙潭寺街道北湖印象二期一栋二单元504');
INSERT INTO `sys_user` VALUES (85, 111, '13540422960', '邹霞', '0', NULL, '13540422960', '1', NULL, '$2a$10$RDi9jVpIVTiMj5r3s4VpDuTH58qV/tQUHJkqa8Uy1rPatcvJx2AGC', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '3', '3', '6', NULL, '2011-07-05', NULL, NULL, NULL, '510322198806060442', '四川省自贡市', '13', '汉族', '西南交通大学', '工程造价管理', '2', '2015-07-05', NULL, '成都市青羊区培风路276号颐和京都小区');
INSERT INTO `sys_user` VALUES (86, 111, '13488985627', '罗声燕', '0', NULL, '13488985627', '1', NULL, '$2a$10$CtWwfYcrgBtraV3xqhQhV.kWik4rZ4822ASd8W3h5.wZc0uodL8Yy', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '3', '3', '6', NULL, '2011-07-05', NULL, NULL, NULL, '500383198810144949', '重庆市永川区', '13', '汉族', '西南交通大学', '工程造价管理', '2', '2015-07-05', NULL, '成都市青羊区清水滨河路131号金沙十年');
INSERT INTO `sys_user` VALUES (87, 111, '18227609102', '王琴', '0', NULL, '18227609102', '1', NULL, '$2a$10$eez8lO.1lJINr/er1fdE6Omhzay2jenfJL6FcIZYutqYgMoB8f5Cy', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, '5', '1', '1', NULL, '2019-12-19', NULL, NULL, NULL, '511321199803101842', '四川省南充市', '13', '汉族', '郑州测绘学校', '地图制图与地理信息系统', '5', '2023-12-19', NULL, '成都市郫都区校园路东段绵世溪地湾');
INSERT INTO `sys_user` VALUES (88, 111, '15281034798', '李静', '0', NULL, '15281034798', '1', NULL, '$2a$10$ExRAx5XVRDTVJVFqNBf0YO6htWe/U3FiWgZP.81viqH2rSUswlNq.', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '4', '2', '4', NULL, '2019-12-19', NULL, NULL, NULL, '510681199007141829', '四川省广汉市', '13', '汉族', '大连理工大学城市学院', '测绘工程', '2', '2023-12-19', NULL, '成都市成华区府华二路68号蓝光COCO时代');
INSERT INTO `sys_user` VALUES (89, 111, '18380143305', '刘垚', '0', NULL, '18380143305', '1', NULL, '$2a$10$8k/.gHxOoxOPDAuqB8k3wefRcxNCGavLsYrxVQvZb8yqS3TjuwBwq', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, '5', '1', '1', NULL, '2019-12-19', NULL, NULL, NULL, '50022819970829454X', '重庆市梁平区', '12', '汉族', '成都铁路工程学院', '铁道施工与养护', '5', '2023-12-19', NULL, '成都市郫都区犀浦镇天河路合能橙中心');
INSERT INTO `sys_user` VALUES (90, 111, '15208298451', '李杨', '0', NULL, '15208298451', '0', NULL, '$2a$10$gC2KXrcQKIHY/QElMfztdOpnH8DydgNMJPsrk3DfUNTkou5/CgINa', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '6', NULL, '2017-06-27', NULL, NULL, NULL, '513701199607243913', '四川省巴中市', '13', '汉族', '中国地质大学', '土木工程', '2', '2021-06-27', NULL, '成都市金牛区西安街道荣光巷一居');
INSERT INTO `sys_user` VALUES (91, 111, '18990913384', '朱姝', '0', NULL, '18990913384', '1', NULL, '$2a$10$OWNIsCHFQJOKV43X1IY79.U3qkF5.MWvI7xpxKUy.hru47I/KwbhG', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '3', NULL, '2021-08-16', NULL, NULL, NULL, '511502199907285561', '四川省宜宾市', '12', '汉族', '四川农业大学', '地理信息科学', '2', '2022-08-16', '2025-08-15', '成都市青羊区青羊大道16号水木光华6栋');
INSERT INTO `sys_user` VALUES (92, 111, '15108355309', '张韦', '0', NULL, '15108355309', '0', NULL, '$2a$10$J.6AFKcQd1o/LmFmYTFa0OLU/37A6AoxjkzZSuKa31VVQX37Uyv46', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '3', NULL, '2019-04-02', NULL, NULL, NULL, '510181199611041915', '成都市都江堰市', '12', '汉族', '中国地质大学', '土木工程', '2', '2023-04-02', NULL, '四川省成都市都江堰市幸福镇奎光东街96号');
INSERT INTO `sys_user` VALUES (93, 111, '18108260500', '黄建春', '0', NULL, '18108260500', '0', NULL, '$2a$10$t5eQZ/jNLPtwrIQ.mKJDXeyatdyVTf45mllYihLrLtFJ9aUVbWDJ6', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '11', NULL, NULL, '1', '3', '1', '1998-12-01', NULL, NULL, NULL, '510106198102023212', '四川省成都市', '13', '汉族', NULL, NULL, '5', '2016-01-01', NULL, '四川省成都市武侯区沙堰西二街20号25栋2单元5号');
INSERT INTO `sys_user` VALUES (94, 111, '13881755761', '廖绍毅', '0', NULL, '13881755761', '0', NULL, '$2a$10$0AhNQf6x86KEbjoRwjPTJ.Qh9GLubsv5fI1GcXhiErvb1TZ3z5n8e', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, '1', '1', NULL, NULL, '4', '4', NULL, '2021-07-16', NULL, NULL, NULL, '510121198410190614', '四川省成都市', '13', '汉族', '西南交通大学', '土木工程', '2', '2022-07-16', '2025-07-15', '四川省成都市金堂县赵镇康宁街398号星月湾2栋2单元');
INSERT INTO `sys_user` VALUES (95, 111, '15700353317', '杨晶', '0', NULL, '15700353317', '0', NULL, '$2a$10$Zb7h3keORdWDcfKWwOfaye8B7eAtBSOWpAcleWPL1nbB/Uz4TH2MO', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '3', '3', '5', NULL, '2017-07-18', NULL, NULL, NULL, '510822199312115978', '四川省广元市', '10', '汉族', '内江师范学院', '测绘工程', '2', '2021-07-18', NULL, '四川省成都市彭州市桂花镇清桥村一组21号');
INSERT INTO `sys_user` VALUES (96, 111, '13618069959', '蒋剑虹', '0', NULL, '13618069959', '0', NULL, '$2a$10$Jrxgfpg/WjilHF7EnAFf1eTf0UJrJjpHa3iZFRr4WBUgiRg5q8MvK', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '10', NULL, NULL, '2', '6', '0', '1990-12-01', NULL, NULL, NULL, '51900319710108643X', '四川省都江堰市', '13', '汉族', NULL, NULL, '4', '2016-01-01', NULL, '四川省成都市都江堰市彩虹大道北段268号五幢三单元401');
INSERT INTO `sys_user` VALUES (97, 111, '13882487125', '赵明焱', '0', NULL, '13882487125', '0', NULL, '$2a$10$hrP8JWBFl.ZcLlB6pLzRMO9Ar1vprif6JHUvkJy1Ubh158eH5WdyC', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '2', '2', NULL, '2022-10-08', NULL, NULL, NULL, '513226199810310712', '四川省金川县', '12', '藏族', '防灾科技学院', '测绘工程', '2', '2023-10-08', '2026-10-07', '成都市成华区八里庄地质花园');
INSERT INTO `sys_user` VALUES (98, 111, '18228226661', '董旭鹏', '0', NULL, '18228226661', '0', NULL, '$2a$10$26NgPI5cVV9ov01myLEF7.qjPg6P95DbOEAtrAzexqp2equ4evvp6', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '0', NULL, '2022-10-08', NULL, NULL, NULL, '513901200010170615', '四川省资阳市', '12', '汉族', '四川水利职业技术学院', '测绘地理信息技术', '3', '2023-10-08', '2026-10-07', '四川省资阳市雁江区帝景名苑17栋12-1');
INSERT INTO `sys_user` VALUES (99, 111, '15775308748', '邓汶滨', '0', NULL, '15775308748', '0', NULL, '$2a$10$ht/hhTvbyTQgjdRVp5GJtO/vVOgCpvvMg9vreHyLBR3EkEeAIBLhG', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '2', NULL, '2023-09-18', NULL, NULL, NULL, '513821200105047038', '四川省眉山市', '12', '汉族', '西华师范大学', '测绘工程', '2', '2023-09-18', '2024-09-17', '四川省眉山市东坡区双赋园a区');
INSERT INTO `sys_user` VALUES (100, 111, '19949408104', '罗毅', '0', NULL, '19949408104', '0', NULL, '$2a$10$TIkS/Y7may9rJJvIP8Kf.uH6/G7Tu2MlzR9QzxKeHCM/FrGRQQc7K', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '0', '1', NULL, '2024-01-15', NULL, NULL, NULL, '511324200308180859', '四川省仪陇县', '12', '汉族', '四川水利职业技术学院', '工程造价', '3', '2024-01-15', '2025-01-14', '四川省成都市成华区迎晖路99号 中环一号');
INSERT INTO `sys_user` VALUES (101, 112, '13688460154', '周全', '0', NULL, '13688460154', '0', NULL, '$2a$10$mEgAhcXgF21g.NbW45AkfeUUJbsvmdo2Q5NzreuCPph1xIoBBs/2W', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, NULL, '5', '5', NULL, '2007-07-09', NULL, NULL, NULL, '421024198512034017', '湖北省荆州市', '9', '汉族', '西南交通大学', '土木工程', '2', '2017-03-30', NULL, '成都市温江区海科路东段519号水韵尚城');
INSERT INTO `sys_user` VALUES (102, 112, '13688404696', '柏金川', '0', NULL, '13688404696', '0', NULL, '$2a$10$eqe0LIm3xIPjn8nXJxsayOf/Wb2t4iRpPp8lc.PRtU0z/fU70FE1W', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, NULL, '4', '6', NULL, '2007-07-09', NULL, NULL, NULL, '420683198505104912', '湖北省枣阳市', '13', '汉族', '四川大学', '工程管理', '2', '2017-04-01', NULL, '四川省成都市青羊区光华大道一段866号元益花园');
INSERT INTO `sys_user` VALUES (103, 112, '13594658239', '黄安堂', '0', NULL, '13594658239', '0', NULL, '$2a$10$2GeU4LkhOVIuaWtPkhnvbOz4VHJ1KufCZqk3A7iinImRvTh29RC7C', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '6', NULL, '2019-09-24', NULL, NULL, NULL, '500226199508056237', '重庆市荣昌', '10', '汉族', '内江师范学院', '测绘工程', '2', '2023-09-24', NULL, '四川省成都市成华区经华北路1号院');
INSERT INTO `sys_user` VALUES (104, 112, '13408566079', '李学勇', '0', NULL, '13408566079', '0', NULL, '$2a$10$LN00CEjwzzQ5O2d1HIvuEe8iJuH.IIJBape7z5RnoO8O8PBjVhmhm', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '10', NULL, NULL, '2', '3', '0', '1994-03-10', NULL, NULL, NULL, '110222197112176817', '北京市顺义区', '13', '汉族', NULL, NULL, '3', '2016-01-01', NULL, '四川省都江堰市彩虹大道北段348号中冶堰景');
INSERT INTO `sys_user` VALUES (105, 112, '15881283512', '陈俊恺', '0', NULL, '15881283512', '0', NULL, '$2a$10$nw2NyCywGj2MC6vc9.duF.S4hkstAF.CQ/Zp77/2.Us9y.aaLbFsW', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '5', NULL, '2018-02-01', NULL, NULL, NULL, '510422199508160015', '四川省攀枝花市', '13', '汉族', '重庆大学', '土木工程', '2', '2019-01-31', NULL, '四川省攀枝花市仁和区银华社区金科集美阳光');
INSERT INTO `sys_user` VALUES (106, 112, '15883351306', '彭永红', '0', NULL, '15883351306', '0', NULL, '$2a$10$1MBqdXzPzh.Ns36ue1t6Jukgjmg6ajdjq2A2OoQVOkRIcGyIPxiBC', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '2', '1', '2019-09-19', NULL, NULL, NULL, '511124197501080811', '四川省乐山市', '13', '汉族', NULL, NULL, '4', '2023-09-19', NULL, '四川省乐山市市中区通江街道岷河北街38号都市江景');
INSERT INTO `sys_user` VALUES (107, 112, '18281010079', '邓静', '0', NULL, '18281010079', '0', NULL, '$2a$10$mhJbl/IxvxlTkBiOa2iw2ub3TGEV1HEMpVjTymkQH.L2dc/Mc2U3u', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '5', NULL, '2020-12-17', NULL, NULL, NULL, '510623199309281938', '四川省中江县', '13', '汉族', '四川建筑职业技术学院', '建筑工程技术', '3', '2021-12-17', '2024-12-16', '四川省中江县黄鹿镇红金村5组33号');
INSERT INTO `sys_user` VALUES (108, 112, '18328739381', '刘庆波', '0', NULL, '18328739381', '0', NULL, '$2a$10$yWSfLMdc9IjR5UeoSw6Cg.tT3s7OiMGjOIQHcK6LidUJoEPnJR62e', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '3', '3', '4', NULL, '2021-06-11', NULL, NULL, NULL, '51072719921006431X', '四川省绵阳市', '13', '羌族', '成都理工大学', '勘查技术与工程', '2', '2022-06-11', '2025-06-10', '四川省绵阳市江油市诗城路中段236号江城苑二区');
INSERT INTO `sys_user` VALUES (109, 112, '18205207306', '高强', '0', NULL, '18205207306', '0', NULL, '$2a$10$x/C4qUuBeh.E6NDxUTM56.JLph06y08sN822RwXOZDEpddwBUEyBy', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '6', NULL, '2021-08-23', NULL, NULL, NULL, '513822199609142451', '四川省仁寿县', '12', '汉族', '中国矿业大学', '测绘工程', '2', '2022-08-23', '2025-08-22', '四川省成都市新都区斑竹园街道锦城小区25栋10号');
INSERT INTO `sys_user` VALUES (110, 112, '18380411075', '韩兴国', '0', NULL, '18380411075', '0', NULL, '$2a$10$1iIUt.FPLhL3TyZ1ysgttuFFIsrpYNXGFAxPbK585uamUXaNyt2JG', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '4', '2', '5', NULL, '2022-05-12', NULL, NULL, NULL, '51342619941015423X', '四川省会东县', '13', '汉族', '四川水利职业技术学院', '工程测量技术', '3', '2023-05-12', '2026-05-11', '四川省凉山州会东县满银沟镇发窝村12组34号');
INSERT INTO `sys_user` VALUES (111, 112, '13693480782', '何安', '0', NULL, '13693480782', '0', NULL, '$2a$10$cx3q5IGQIMvN8EXPJFSg/uwMYVEea19GrKQRTJ6NuVPnHfTERSo1K', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '2', NULL, '2023-06-25', NULL, NULL, NULL, '452701199902162617', '广西河池市', '12', '壮族', '成都理工大学', '测绘工程', '2', '2023-06-25', '2024-06-24', '成都市龙泉驿区大面街道天鹅西湖南路1号世茂城2期25栋3008');
INSERT INTO `sys_user` VALUES (112, 112, '15802829286', '向艳雄', '0', NULL, '15802829286', '0', NULL, '$2a$10$2TjldaBhAq1XvqzuJE3R8OaG/w0D4TrmfzOrJ9nTt8TAujLSzFD5O', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, '1', '2', NULL, NULL, '4', '4', NULL, '2007-03-21', NULL, NULL, NULL, '420984198104101051', '湖北省汉川市', '13', '汉族', '四川大学', '工程管理', '2', '2017-03-30', NULL, '温江区天府学海路88号中铁丽景书香');
INSERT INTO `sys_user` VALUES (113, 112, '18113169528', '蒲帆', '0', NULL, '18113169528', '0', NULL, '$2a$10$SU7PRXiUtYbs7U8Uk0dG7uMfzsxviNJn7gOrUL/x198eeb/U5CY5O', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, '2', '2', NULL, NULL, '3', '6', NULL, '2017-07-06', NULL, NULL, NULL, '511325199303064016', '四川省南充市', '13', '汉族', '成都信息工程大学', '测绘工程', '2', '2021-07-06', NULL, '成都市金牛区新泉路33号兴元绿洲五栋一单元802');
INSERT INTO `sys_user` VALUES (114, 112, '13628057328', '薛帅', '0', NULL, '13628057328', '0', NULL, '$2a$10$GkIiJPATc5GamXB9dh5ipeXMIfw0IGlK73BzZS724lvXeGcRB0mUy', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '10', NULL, NULL, '2', '6', '0', '1993-12-07', NULL, NULL, NULL, '513022197004281835', '成都市温江区', '13', '汉族', NULL, NULL, '4', '2016-01-01', NULL, '四川省成都市温江区海科路水韵尚城519号10-1-302');
INSERT INTO `sys_user` VALUES (115, 112, '17709008823', '魏琪豪', '0', NULL, '17709008823', '0', NULL, '$2a$10$Lp2GzuWRvB.sZrIkBbgmL.9xxd6oVps9ndJsJ7KJ1TK9Ab7Momi8K', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, NULL, NULL, NULL, '2024-03-06', NULL, NULL, NULL, '510704199706231519', '四川省绵阳市', '12', '汉族', '西南科技大学', '地质工程', '1', '2024-03-06', '2025-03-05', '成都市双流区新景鼎南川宇-1号楼-1单元3楼-305');
INSERT INTO `sys_user` VALUES (116, 113, '13980688458', '段文祥', '0', NULL, '13980688458', '0', NULL, '$2a$10$lgVll1INYHMyuzx5.AAI.eMqh6FKowzgNbpngQ2hNfLW2FN6A2tj6', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, '2', '4', '1', NULL, '2022-02-07', NULL, NULL, NULL, '622323198508271130', '甘肃省古浪县', '13', '汉族', '成都理工大学', '计算机应用与维护', '3', '2023-02-07', '2026-02-06', '成都市成华区中海新华府');
INSERT INTO `sys_user` VALUES (117, 113, '18980006770', '张伟', '0', NULL, '18980006770', '0', NULL, '$2a$10$kUM4jURrrQne9Dov9q35LOTqIghgbiKGYdfU7JQ.8dm1QsgKGwX.6', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '0', '0', NULL, '2022-02-07', NULL, NULL, NULL, '513822198702090313', '四川省郫县', '13', '汉族', '郑州大学', '土木工程', '2', '2023-02-07', '2026-02-06', '四川省郫县犀浦镇校园路55号9栋1单元22楼2201号');
INSERT INTO `sys_user` VALUES (118, 113, '15298033499', '万明', '0', NULL, '15298033499', '0', NULL, '$2a$10$wwLe826KZWh/2N7ljQ5G2.Rx89sHuvX6ZMYBvXkL3EKr05A3bGs7u', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '0', NULL, '2022-02-07', NULL, NULL, NULL, '511123199310015155', '四川省犍为县', '13', '汉族', '四川水利职业技术学院', '水文与工程地质', '3', '2023-02-07', '2026-02-06', '成都市天府新区华阳海昌路169号2-3503');
INSERT INTO `sys_user` VALUES (119, 113, '18582552495', '张可', '0', NULL, '18582552495', '0', NULL, '$2a$10$8aOXI37D8v1jvi2i4L7SZ.2VYJvVuN35BGRpnoFWSppYqJsWbglRy', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, NULL, '3', '3', NULL, '2022-11-21', NULL, NULL, NULL, '51372219910911001X', '四川省成都市', '13', '汉族', '西南科技大学', '建筑与土木工程', '1', '2023-11-21', '2026-11-20', '四川省成都市高新区中和街道万科璟南堂');
INSERT INTO `sys_user` VALUES (120, 202, '13551823637', '李锋', '0', NULL, '13551823637', '0', NULL, '$2a$10$KeM1IgABLPu9/sxCF/lAPetb6He4tc1mhUShvTfcGCzPyYq2fJ2bW', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, NULL, '4', '7', NULL, '2004-05-04', NULL, NULL, NULL, '530111197608206550', '山西省长治县', '13', '汉族', '西南交通大学', '土木工程', '2', '2017-01-01', NULL, '成都市武侯区高升桥东路22号路桥宿舍');
INSERT INTO `sys_user` VALUES (121, 203, '13881397406', '张元锋', '0', NULL, '13881397406', '0', NULL, '$2a$10$AiItvknFY1lsB3VrYhf6IeAd5l.3XdEzXDGfjEXB7gekiYT5QMlXS', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, '1', '1', NULL, NULL, '4', '6', NULL, '2006-05-08', NULL, NULL, NULL, '410181198406156950', '河南省巩义市', '13', '汉族', '武汉大学', '测绘工程', '2', '2017-04-01', NULL, '成都市温江区花都大道399号朝阳时代西锦9-1-1807');
INSERT INTO `sys_user` VALUES (122, 201, '18602865330', '钱俊锦', '0', NULL, '18602865330', '0', NULL, '$2a$10$sONzSB0TDipF0S6NR8bfhOQrnWzkExpBP2E9ra35oACn0mA4N/zB.', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, '1', '1', NULL, NULL, '4', '6', NULL, '2010-07-14', NULL, NULL, NULL, '513822198712126690', '四川省眉山市', '13', '汉族', '西南石油大学', '测绘工程', '2', '2014-07-13', NULL, '成都市青羊区光华东三路398号中铁西城东苑');
INSERT INTO `sys_user` VALUES (123, 201, '17311677347', '陈伟', '0', NULL, '17311677347', '0', NULL, '$2a$10$KkMJvKDpdA6THOAgp1gEKu2F8YO9yWQv4NlvW2VQ1u16m7BkRe/Zu', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '6', NULL, '2017-07-03', NULL, NULL, NULL, '511123199509165759', '四川省乐山市', '13', '汉族', '四川水利职业技术学院', '工程测量技术', '3', '2021-07-03', NULL, '乐山市犍为县玉津镇凤凰路南段961号铜雀台1期');
INSERT INTO `sys_user` VALUES (124, 204, '18482173451', '冉凉南', '0', NULL, '18482173451', '0', NULL, '$2a$10$pnreJEJVT4J7ph9gdmk.gugHC41vNo62XLwN81u2UTHv6mjPEuice', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, '2', '3', NULL, NULL, '3', '5', NULL, '2018-10-02', NULL, NULL, NULL, '513022199512230179', '四川省达州市', '13', '汉族', '中国地质大学', '土木工程', '2', '2022-10-02', NULL, '成都市青羊区鸣翠路1号院1-5');
INSERT INTO `sys_user` VALUES (125, 202, '18382319155', '谢承东', '0', NULL, '18382319155', '0', NULL, '$2a$10$TCy/nKEHPlo3Dxhmj0aqUewRlgQ798wSMA7oXUqzBj1IMMEdUB19C', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, '4', '2', '6', NULL, '2017-08-08', NULL, NULL, NULL, '500233199406065515', '成都市青羊区', '13', '汉族', '东北大学', '测绘工程', '2', '2021-08-08', NULL, '成都市郫都区红光大道9999号');
INSERT INTO `sys_user` VALUES (126, 203, '18227480379', '周炎', '0', NULL, '18227480379', '0', NULL, '$2a$10$.pniFwppp7xnbDVrhQ84p.Q9KP.U8bBYpnherozUd7Cq20d45froW', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, NULL, '1', '2', NULL, '2019-11-29', NULL, NULL, NULL, '421182198902083315', '湖北省武穴市', '13', '汉族', '西北工业大学', '土木工程', '2', '2022-11-29', '2025-11-28', '成都市龙泉驿区大面街道青台山路99号万卷山小区7栋3203');
INSERT INTO `sys_user` VALUES (127, 204, '18140430240', '胡庆', '0', NULL, '18140430240', '0', NULL, '$2a$10$arMU8qnGh36uNxeUdpcdTuu9qNdENZY7k3AfJezylOlrtyTJEkzvm', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, NULL, '1', '0', NULL, '2021-08-23', NULL, NULL, NULL, '513424199708190417', '四川省德昌县', '13', '汉族', '四川文化产业职业学院', '建筑工程技术', '3', '2021-08-23', NULL, '四川省德昌县麻栗镇大坝村5组27号');
INSERT INTO `sys_user` VALUES (128, 203, '18780029464', '何行', '0', NULL, '18780029464', '0', NULL, '$2a$10$cfPj9VyZbdxRr9k66k1L7uwTI/wsieGwhxl7jfKBuf4/fGjEAq2yO', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '5', '1', '0', NULL, '2023-02-01', NULL, NULL, NULL, '511321199705135838', '四川省南部县', '12', '汉族', '成都农业科技职业学院', '汽车检测与维修技术', '3', '2023-02-01', NULL, '成都市郫都区安靖镇林湾名居');
INSERT INTO `sys_user` VALUES (129, 200, '18283500919', '杨良轩', '0', NULL, '18283500919', '0', NULL, '$2a$10$13MD0vpbxsFsvASpd9ZLXOs4CXy75FqzvZnM2l3oEKvFMexTpjjP2', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '2', NULL, '2012-01-09', NULL, NULL, NULL, '513124197111161618', '四川省雅安市', '13', '汉族', NULL, NULL, '4', '2016-01-08', NULL, '四川省雅安市汉源县九襄镇大庄村九组');
INSERT INTO `sys_user` VALUES (130, 200, '13880159142', '周建伟', '0', NULL, '13880159142', '0', NULL, '$2a$10$1h01ST1wKDsfibpwNI3wtedkZAdXKbnZApM/6.Qhh5F8BzdsMX7cO', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '2', NULL, '2006-08-28', NULL, NULL, NULL, '519003197210286457', '四川省成都市', '13', '汉族', NULL, NULL, '4', '2017-04-01', NULL, '都江堰市奎光塔街道走马河西路下段232号兰卡威');
INSERT INTO `sys_user` VALUES (131, 200, '13980809722', '罗友权', '0', NULL, '13980809722', '0', NULL, '$2a$10$IQhdc3rLerS/2rGBR9T72uxCB9RG2hMsDUP/u3t5/LkxGXWMvlbo6', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '2', NULL, '2006-03-12', NULL, NULL, NULL, '512922196907217475', '四川省南充市', '13', '汉族', NULL, NULL, '4', '2017-04-01', NULL, '四川省南充市顺庆区滨江中路1段501号天乙华府');
INSERT INTO `sys_user` VALUES (132, 200, '15228916534', '凌涛', '0', NULL, '15228916534', '0', NULL, '$2a$10$Sdcno/aOnHumxssG6yKS7eYi3n14P5KTc.fXgWah7KE0z3UqlHSdO', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '2', NULL, '2017-10-10', NULL, NULL, NULL, '511022197601104253', '四川省资阳市', '13', '汉族', NULL, NULL, '4', '2021-10-10', NULL, '成都市成华区八里桥路245号1栋');
INSERT INTO `sys_user` VALUES (133, 200, '15928517280', '雷光泽', '0', NULL, '15928517280', '0', NULL, '$2a$10$lg8AxNNrC9HEGav9dbNABuN0zFSjdlR6RCgsb6NM39TkkfJdhXrda', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '2', NULL, '2006-03-12', NULL, NULL, NULL, '511124196308031431', '四川省乐山市', '13', '汉族', NULL, NULL, '4', '2017-04-01', NULL, '四川省乐山市市中区滨江中路北段2718号铂金汇小区');
INSERT INTO `sys_user` VALUES (134, 200, '15828156243', '廖勇', '0', NULL, '15828156243', '0', NULL, '$2a$10$x8tgXCs.BvtOt/rvAcxMmOCiukGffNna2L2zq0ROh5WYuCRkg1epa', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '2', NULL, '2019-12-02', NULL, NULL, NULL, '51390119870830331X', '四川省资阳市', '13', '汉族', '四川省郫县友爱技术学校', '计算机及应用', '5', '2023-12-02', NULL, '四川省成都市郫都区安德街道安龙村6组25号');
INSERT INTO `sys_user` VALUES (135, 200, '14726050305', '康科伟', '0', NULL, '14726050305', '0', NULL, '$2a$10$x648xaYsqHMwY8yUZYh4MuDUrMLzmFx.3PD6CtIsLczI8sb3vUUwi', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '2', NULL, '2021-07-09', NULL, NULL, NULL, '51322619940305271X', '四川省金川县', '13', '藏族', NULL, NULL, '4', '2022-07-09', '2025-07-08', '成都市郫都区犀浦镇润扬双铁广场6栋一单元701');
INSERT INTO `sys_user` VALUES (136, 200, '18111675896', '熊艳华', '0', NULL, '18111675896', '0', NULL, '$2a$10$yhimGFIs3kOEsP3o99YjEuQIJCvPZ1Hle62kSF2mRc2GXbU3bfVcC', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '2', NULL, '2022-01-27', NULL, NULL, NULL, '510921197711167935', '四川省大英县', '13', '汉族', NULL, NULL, '4', '2023-01-27', '2026-01-26', '四川省大英县玉峰镇肖家沟村9社42号');
INSERT INTO `sys_user` VALUES (137, 200, '18982085285', '赵永来', '0', NULL, '18982085285', '0', NULL, '$2a$10$6VUpByM8SW52L7qPJSATAuyXd7OaP818NNwXcSpfZFnyIwOfUGR1W', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '2', NULL, '2023-10-07', NULL, NULL, NULL, '510108197701183312', '四川省成都市', '13', '汉族', NULL, NULL, '4', '2023-10-07', '2024-10-06', '成都市武侯区晋阳路215号2-2-501');
INSERT INTO `sys_user` VALUES (138, 114, '15982167611', '刘洋', '0', NULL, '15982167611', '0', NULL, '$2a$10$ge4kCM7rso5s30Ex0Hg9f.nqkwh.DJgiLlWD6rUvQL/VpBCQ9FDVC', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, NULL, '5', '3', NULL, '2020-04-04', NULL, NULL, NULL, '511323198907130013', '四川省南充市', '13', '汉族', '西南交通大学', '土木工程', '2', '2021-04-04', '2024-04-03', '成都市都江堰市光明街和谐家园13栋1-2号');
INSERT INTO `sys_user` VALUES (139, 114, '17345090038', '郑鹏', '0', NULL, '17345090038', '0', NULL, '$2a$10$KTy/wMW1QYlDaSYS9Mspm.TIiZV1FtRY4FCngpDmJtgn0WYgiX5da', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '6', NULL, '2018-09-11', NULL, NULL, NULL, '500231199105290038', '重庆市垫江县', '13', '汉族', '重庆水利电力职业技术学院', '工程测量与监理', '3', '2021-09-11', '2024-09-10', '四川成都市彭州市致和镇南部新城置信逸景苑13栋3单元');
INSERT INTO `sys_user` VALUES (140, 114, '17612894797', '黄强', '0', NULL, '17612894797', '0', NULL, '$2a$10$VUAaRGBT71pYOjJiD1c/EuEKuT08TFkgqykukuF.2n5rTx5K97lja', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, '1', '2', NULL, '2021-08-01', NULL, NULL, NULL, '511323199501284199', '四川省蓬安县', '13', '汉族', '成都理工大学', '工程测量技术', '3', '2022-08-01', '2025-07-31', '四川省蓬安县金叶路龙角丽景');
INSERT INTO `sys_user` VALUES (141, 114, '19923847254', '贾万跃', '0', NULL, '19923847254', '0', NULL, '$2a$10$ekUbiDItsqt4KwEApQYBsOy1fG2mLJMZPu6WIQnFQluxk8Wv3ujPq', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, NULL, NULL, NULL, '2024-05-06', NULL, NULL, NULL, '370831199904195115', '山东省泗水县', '12', '汉族', '青岛理工大学', '工程造价', '2', '2024-05-06', '2025-05-05', '重庆市九龙坡区渝州路街道顺祥新锐地带 D 栋 7-10');
INSERT INTO `sys_user` VALUES (142, 115, '13980977233', '李禺', '0', NULL, '13980977233', '0', NULL, '$2a$10$2.9YOYVaJc8HiG.ad8/ABeUDvtvqPmTxrkHWsFtZvEiQUwJKfEKo.', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, NULL, NULL, NULL, NULL, '1997-07-21', NULL, NULL, NULL, '530111197509266558', '四川省米易', '9', '汉族', '武汉大学', '测绘工程', '2', NULL, NULL, '成都市青羊区双薪南路21号');
INSERT INTO `sys_user` VALUES (143, 115, '13488982667', '尹超', '0', NULL, '13488982667', '0', NULL, '$2a$10$6rXd35El0scpa9nWpAYeOeN8vWvOy6yUsehr78Fk60auYcDaslH02', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, '2', '2', NULL, NULL, NULL, NULL, NULL, '2011-07-05', NULL, NULL, NULL, '513722198808050891', '四川省巴中市', '13', '汉族', '国家开放大学', '土木工程', '2', NULL, NULL, '成都市青羊区培风路276号（颐和京都1栋2单元1503）');
INSERT INTO `sys_user` VALUES (144, 115, '15881108097', '程昊', '0', NULL, '15881108097', '0', NULL, '$2a$10$j54/TMsUC2TFkNeAWl7yeu9Rs6nw/o4sLPyz9YqyyGz7mR5zZ0nci', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, '2', '2', NULL, NULL, NULL, NULL, NULL, '2011-07-05', NULL, NULL, NULL, '510626198909214055', '重庆市长寿县', '13', '汉族', '阿坝广播电视大学', '土木工程', '2', NULL, NULL, '成都市青羊区金沙愉景二期');
INSERT INTO `sys_user` VALUES (145, 115, '15928663470', '丁亮', '0', NULL, '15928663470', '0', NULL, '$2a$10$3xxxhcsDvJlIdowIUqkHeeK7aJQsZf7Y.tqV5ytZqHlO9PrjIpuh6', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, '4', '2', '6', NULL, '2018-12-06', NULL, NULL, NULL, '500101199510171813', '重庆市万州区', '13', '汉族', '西南交通大学', '土木工程', '2', '2022-12-06', NULL, '四川省成都市金牛区金泉街道103号金科苑四区10栋一单元12号');
INSERT INTO `sys_user` VALUES (146, 115, '15202868564', '夏志斌', '0', NULL, '15202868564', '0', NULL, '$2a$10$oPblGll8HMwlMUBjzUzZg.YG1tdjp.SUh4VVI.kPk84hO/9fbs7Jm', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '3', NULL, NULL, NULL, NULL, NULL, '2019-02-20', NULL, NULL, NULL, '429004199008293198', '湖北省仙桃市', '13', '汉族', '湖北水利水电职业技术学院', '水利水电建筑工程', '3', NULL, NULL, '四川省成都市温江区海科东路688号');
INSERT INTO `sys_user` VALUES (147, 115, '18200213829', '董云勇', '0', NULL, '18200213829', '0', NULL, '$2a$10$sSmjMXSGaB4A4bu3vvlDQuU6ocj0xnmkGBaL3TsgHIS5jBIZNa0WK', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '13', NULL, NULL, NULL, NULL, NULL, '2023-09-21', NULL, NULL, NULL, '512922197208137374', '四川省南部县', '13', '汉族', NULL, NULL, '4', NULL, NULL, '成都市郫都区友爱镇释迦桥上街');
INSERT INTO `sys_user` VALUES (148, 115, '13808178930', '周芝', '0', NULL, '13808178930', '1', NULL, '$2a$10$LGxR23vs20cfgHSOHg0.jeHb5v0.FcJ6ge6g5d/itXfdaM7hFkGRq', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '4', NULL, NULL, '3', '7', NULL, '2013-06-03', NULL, NULL, NULL, '510104197810300666', '四川省成都市', '13', '汉族', '西南财经大学', '会计', '1', '2017-06-02', NULL, '成都市青羊区青羊大道101号博瑞都市花园');
INSERT INTO `sys_user` VALUES (149, 116, '13880644169', '林方迁', '0', NULL, '13880644169', '0', NULL, '$2a$10$zZmR9zabOTCYdRLMsovl0OqIvCFQ3DTObDWGDn2ZKjWYhuIpLFxTe', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '2', NULL, NULL, NULL, NULL, NULL, '2011-07-05', NULL, NULL, NULL, '510113198910055670', '四川省成都市', '13', '汉族', '中央广播电视大学', '土木工程', '2', '2013-07-05', NULL, '成都市青白江区武海中华名城一期3栋一单元1403号');
INSERT INTO `sys_user` VALUES (150, 116, '18140055216', '杨柳', '0', NULL, '18140055216', '1', NULL, '$2a$10$Lw5QVFP6ZJ7XPgnIIzL4I.dE6TDVQWy5yhl.7cYpW12b6vTXctl26', '0', '0', NULL, NULL, NULL, '2024-05-14 10:41:32', NULL, NULL, NULL, NULL, '1', NULL, NULL, NULL, NULL, NULL, '2005-03-01', NULL, NULL, NULL, '420321198307190041', '湖北省十堰市', '10', '汉族', '西南交通大学', '土木工程', '2', '2017-01-01', NULL, '成都市温江区江浦路288号洲际亚洲湾');

-- ----------------------------
-- 3、岗位信息表
-- ----------------------------
drop table if exists sys_post;
create table sys_post
(
  post_id       bigint(20)      not null auto_increment    comment '岗位ID',
  post_code     varchar(64)     not null                   comment '岗位编码',
  post_name     varchar(50)     not null                   comment '岗位名称',
  post_sort     int(4)          not null                   comment '显示顺序',
  status        char(1)         not null                   comment '状态（0正常 1停用）',
  create_by     varchar(64)     default ''                 comment '创建者',
  create_time   datetime                                   comment '创建时间',
  update_by     varchar(64)     default ''			       comment '更新者',
  update_time   datetime                                   comment '更新时间',
  remark        varchar(500)    default null               comment '备注',
  primary key (post_id)
) engine=innodb comment = '岗位信息表';

-- ----------------------------
-- 初始化-岗位信息表数据
-- ----------------------------
insert into `sys_post` values (1, '1', '董事长', 1, '0', 'admin', '2024-01-04 14:21:52', null, null, null);
insert into `sys_post` values (2, '2', '总经理', 2, '0', 'admin', '2024-01-04 14:22:52', null, null, null);
insert into `sys_post` values (3, '3', '董事', 3, '0', 'admin', '2024-01-04 14:32:11', null, null, null);
insert into `sys_post` values (4, '4', '党总支书记', 4, '0', 'admin', '2024-01-04 14:34:43', null, null, null);
insert into `sys_post` values (5, '5', '工会主席', 5, '0', 'admin', '2024-01-04 14:34:43', null, null, null);
insert into `sys_post` values (6, '6', '团委书记', 6, '0', 'admin', '2024-01-04 14:34:43', null, null, null);
insert into `sys_post` values (7, '7', '高级顾问', 7, '0', 'admin', '2024-01-04 14:35:34', null, null, null);
insert into `sys_post` values (8, '8', '技术顾问', 8, '0', 'admin', '2024-01-04 14:35:40', '', null, null);
insert into `sys_post` values (9, '9', '副总经理', 9, '0', 'admin', '2024-01-04 14:35:48', null, null, null);
insert into `sys_post` values (10, '10', '秘书', 10, '0', 'admin', '2024-01-04 14:36:08', null, null, null);
insert into `sys_post` values (11, '11', '党总支干事', 11, '0', 'admin', '2024-01-04 14:37:29', null, null, null);
insert into `sys_post` values (12, '12', '总工程师', 12, '0', 'admin', '2024-01-04 14:37:43', null, null, null);
insert into `sys_post` values (13, '13', '总经理助理', 13, '0', 'admin', '2024-01-04 14:38:00', null, null, null);
insert into `sys_post` values (14, '14', '副总工程师', 14, '0', 'admin', '2024-01-04 14:42:07', null, null, null);
insert into `sys_post` values (15, '15', '主任', 15, '0', 'admin', '2024-01-04 14:39:20', null, null, null);
insert into `sys_post` values (16, '16', '副主任', 16, '0', 'admin', '2024-01-04 14:39:34', null, null, null);
insert into `sys_post` values (17, '17', '财务总监', 17, '0', 'admin', '2024-01-04 14:40:44', null, null, null);
insert into `sys_post` values (18, '18', '专总', 18, '0', 'admin', '2024-01-04 14:40:44', null, null, null);
insert into `sys_post` values (19, '19', '经理', 19, '0', 'admin', '2024-01-04 14:48:57', null, null, null);
insert into `sys_post` values (20, '20', '副经理', 20, '0', 'admin', '2024-01-04 16:50:16', '', null, null);
insert into `sys_post` values (21, '21', '项目主任', 21, '0', 'admin', '2024-01-04 16:49:08', '', null, null);
insert into `sys_post` values (22, '22', '项目副主任', 22, '0', 'admin', '2024-01-04 16:49:58', '', null, null);
insert into `sys_post` values (23, '23', '专职安全员', 23, '0', 'admin', '2024-01-04 15:32:52', '', null, null);
insert into `sys_post` values (24, '24', '工会干事', 24, '0', 'admin', '2024-01-04 14:49:48', null, null, null);
insert into `sys_post` values (25, '25', '业务主管', 25, '0', 'admin', '2024-01-04 14:50:20', null, null, null);
insert into `sys_post` values (26, '26', '业务助理', 26, '0', 'admin', '2024-01-04 14:51:41', null, null, null);
insert into `sys_post` values (27, '27', '办事员', 27, '0', 'admin', '2024-01-04 14:52:29', null, null, null);
insert into `sys_post` values (28, '28', '会计', 28, '0', 'admin', '2024-01-04 14:53:13', null, null, null);
insert into `sys_post` values (29, '29', '出纳', 29, '0', 'admin', '2024-01-04 14:53:27', null, null, null);
insert into `sys_post` values (30, '30', '员工', 30, '0', 'admin', '2024-01-04 14:53:34', null, null, null);
insert into `sys_post` values (31, '31', '驾驶员', 31, '0', 'admin', '2024-01-04 14:53:50', null, null, null);
insert into `sys_post` values (32, '32', '子公司执行董事', 32, '0', 'admin', '2024-01-04 14:53:55', null, null, null);
insert into `sys_post` values (33, '33', '子公司总经理', 33, '0', 'admin', '2024-01-04 14:55:00', null, null, null);
insert into `sys_post` values (34, '34', '子公司技术顾问', 34, '0', 'admin', '2024-01-04 14:55:00', null, null, null);

-- ----------------------------
-- 4、角色信息表
-- ----------------------------
drop table if exists sys_role;
create table sys_role (
  role_id              bigint(20)      not null auto_increment    comment '角色ID',
  role_name            varchar(30)     not null                   comment '角色名称',
  role_key             varchar(100)    not null                   comment '角色权限字符串',
  role_sort            int(4)          not null                   comment '显示顺序',
  data_scope           char(1)         default '1'                comment '数据范围（1：全部数据权限 2：自定数据权限 3：本部门数据权限 4：本部门及以下数据权限）',
  menu_check_strictly  tinyint(1)      default 1                  comment '菜单树选择项是否关联显示',
  dept_check_strictly  tinyint(1)      default 1                  comment '部门树选择项是否关联显示',
  status               char(1)         not null                   comment '角色状态（0正常 1停用）',
  del_flag             char(1)         default '0'                comment '删除标志（0代表存在 2代表删除）',
  create_by            varchar(64)     default ''                 comment '创建者',
  create_time          datetime                                   comment '创建时间',
  update_by            varchar(64)     default ''                 comment '更新者',
  update_time          datetime                                   comment '更新时间',
  remark               varchar(500)    default null               comment '备注',
  primary key (role_id)
) engine=innodb auto_increment=100 comment = '角色信息表';

-- ----------------------------
-- 初始化-角色信息表数据
-- ----------------------------
insert into sys_role values('1', '超级管理员',  'admin',  1, 1, 1, 1, '0', '0', 'admin', sysdate(), '', null, '超级管理员');
insert into sys_role values('2', '普通角色',    'common', 2, 2, 1, 1, '0', '0', 'admin', sysdate(), '', null, '普通角色');
insert into sys_role values('3', '人事管理员',	'staff', 3, 2, 1, 1, '0', '0', 'admin', sysdate(), '', null, '人事管理员');
insert into sys_role values('4', '设备管理员',	'device', 4, 2, 1, 1, '0', '0', 'admin', sysdate(), '', null, '设备管理员');
insert into sys_role values('5', '车辆管理员',	'car', 5, 2, 1, 1, '0', '0', 'admin', sysdate(), '', null, '车辆管理员');
insert into sys_role values('6', '资料归档员',	'archive', 6, 2, 1, 1, '0', '0', 'admin', sysdate(), '', null, '资料归档员');
insert into sys_role values('7', '管理层',		'leader', 7, 2, 1, 1, '0', '0', 'admin', sysdate(), '', null, '管理层');	
insert into sys_role values('8', '经营管理员',	'business', 8, 2, 1, 1, '0', '0', 'admin', sysdate(), '', null, '经营管理员');
insert into sys_role values('9', '财务管理员',	'finance', 9, 2, 1, 1, '0', '0', 'admin', sysdate(), '', null, '财务管理员');
insert into sys_role values('10', '技术管理员',	'technical', 10, 2, 1, 1, '0', '0', 'admin', sysdate(), '', null, '技术管理员');
insert into sys_role values('11', '安全管理员',	'safe', 11, 2, 1, 1, '0', '0', 'admin', sysdate(), '', null, '安全管理员');
insert into sys_role values('12', '项目管理员',	'project', 12, 2, 1, 1, '0', '0', 'admin', sysdate(), '', null, '项目管理员');
insert into sys_role values('13', '部门负责人',	'dept', 13, 2, 1, 1, '0', '0', 'admin', sysdate(), '', null, '部门负责人');

-- ----------------------------
-- 5、菜单权限表
-- ----------------------------
drop table if exists sys_menu;
create table sys_menu (
  menu_id           bigint(20)      not null auto_increment    comment '菜单ID',
  menu_name         varchar(50)     not null                   comment '菜单名称',
  parent_id         bigint(20)      default 0                  comment '父菜单ID',
  order_num         int(4)          default 0                  comment '显示顺序',
  path              varchar(200)    default ''                 comment '路由地址',
  component         varchar(255)    default null               comment '组件路径',
  query             varchar(255)    default null               comment '路由参数',
  is_frame          int(1)          default 1                  comment '是否为外链（0是 1否）',
  is_cache          int(1)          default 0                  comment '是否缓存（0缓存 1不缓存）',
  menu_type         char(1)         default ''                 comment '菜单类型（M目录 C菜单 F按钮）',
  visible           char(1)         default 0                  comment '菜单状态（0显示 1隐藏）',
  status            char(1)         default 0                  comment '菜单状态（0正常 1停用）',
  perms             varchar(100)    default null               comment '权限标识',
  icon              varchar(100)    default '#'                comment '菜单图标',
  create_by         varchar(64)     default ''                 comment '创建者',
  create_time       datetime                                   comment '创建时间',
  update_by         varchar(64)     default ''                 comment '更新者',
  update_time       datetime                                   comment '更新时间',
  remark            varchar(500)    default ''                 comment '备注',
  primary key (menu_id)
) engine=innodb auto_increment=2000 comment = '菜单权限表';

-- ----------------------------
-- 初始化-菜单信息表数据
-- ----------------------------
-- 一级菜单

insert into sys_menu values('1', 	'系统管理', '0', '1', 'system',		null, '', 1, 0, 'M', '0', '0', '', 'system',	'admin', sysdate(), '', null, '系统管理目录');
insert into sys_menu values('2', 	'系统监控', '0', '2', 'monitor',	null, '', 1, 0, 'M', '0', '0', '', 'monitor',	'admin', sysdate(), '', null, '系统监控目录');
insert into sys_menu values('3', 	'系统工具', '0', '3', 'tool',		null, '', 1, 0, 'M', '0', '0', '', 'tool',		'admin', sysdate(), '', null, '系统工具目录');
insert into sys_menu values('4', 	'生产管理', '0', '4', 'product', 	null, '', 1, 0, 'M', '0', '0', '', 'date-range','admin', sysdate(), '', null, '生产管理目录');
insert into sys_menu values('5', 	'经营管理', '0', '5', 'business', 	null, '', 1, 0, 'M', '0', '0', '', 'business', 	'admin', sysdate(), '', null, '经营管理目录');
insert into sys_menu values('6', 	'办公管理', '0', '6', 'oa', 		null, '', 1, 0, 'M', '0', '0', '', 'project', 	'admin', sysdate(), '', null, '办公管理目录');
insert into sys_menu values('7', 	'人事管理', '6', '1', 'staff',		null, '', 1, 0, 'M', '0', '0', '', 'user',		'admin', sysdate(), '', null, '人事管理目录');
insert into sys_menu values('8', 	'设备管理', '6', '2', 'device',		null, '', 1, 0, 'M', '0', '0', '', 'equipment',	'admin', sysdate(), '', null, '设备管理目录');
insert into sys_menu values('9', 	'车辆管理', '6', '3', 'car',		null, '', 1, 0, 'M', '0', '0', '', 'car',		'admin', sysdate(), '', null, '车辆管理目录');
insert into sys_menu values('10', 	'合同评审', '5', '2', 'contract',	null, '', 1, 0, 'M', '0', '0', '', 'documentation',	'admin', sysdate(), '', null, '合同评审目录');
insert into sys_menu values('11', 	'保证金管理','5','3', 'deposit',	null, '', 1, 0, 'M', '0', '0', '', 'cost',		'admin', sysdate(), '', null, '保证金管理目录');
insert into sys_menu values('12', 	'项目台账', '4', '1', 'account',	null, '', 1, 0, 'M', '0', '0', '', 'list',		'admin', sysdate(), '', null, '项目台账目录');
insert into sys_menu values('13', 	'安全管理', '4', '2', 'safe',		null, '', 1, 0, 'M', '0', '0', '', 'validCode',	'admin', sysdate(), '', null, '安全管理目录');
insert into sys_menu values('14', 	'技术管理', '4', '3', 'tech',		null, '', 1, 0, 'M', '0', '0', '', 'clipboard',	'admin', sysdate(), '', null, '技术管理目录');
insert into sys_menu values('15', 	'资料成果', '4', '4', 'archive',	null, '', 1, 0, 'M', '0', '0', '', 'education',	'admin', sysdate(), '', null, '资料成果目录');
insert into sys_menu values('16', 	'预算管理', '4', '5', 'budget',		null, '', 1, 0, 'M', '0', '0', '', 'build',		'admin', sysdate(), '', null, '预算管理目录');

-- 二级菜单
insert into sys_menu values('100',  '用户管理', '1',   '1', 'user',       'system/user/index',        '', 1, 0, 'C', '0', '0', 'system:user:list',        'user',          'admin', sysdate(), '', null, '用户管理菜单');
insert into sys_menu values('101',  '角色管理', '1',   '2', 'role',       'system/role/index',        '', 1, 0, 'C', '0', '0', 'system:role:list',        'peoples',       'admin', sysdate(), '', null, '角色管理菜单');
insert into sys_menu values('102',  '菜单管理', '1',   '3', 'menu',       'system/menu/index',        '', 1, 0, 'C', '0', '0', 'system:menu:list',        'tree-table',    'admin', sysdate(), '', null, '菜单管理菜单');
insert into sys_menu values('103',  '部门管理', '1',   '4', 'dept',       'system/dept/index',        '', 1, 0, 'C', '0', '0', 'system:dept:list',        'tree',          'admin', sysdate(), '', null, '部门管理菜单');
insert into sys_menu values('104',  '岗位管理', '1',   '5', 'post',       'system/post/index',        '', 1, 0, 'C', '0', '0', 'system:post:list',        'post',          'admin', sysdate(), '', null, '岗位管理菜单');
insert into sys_menu values('105',  '字典管理', '1',   '6', 'dict',       'system/dict/index',        '', 1, 0, 'C', '0', '0', 'system:dict:list',        'dict',          'admin', sysdate(), '', null, '字典管理菜单');
insert into sys_menu values('106',  '参数设置', '1',   '7', 'config',     'system/config/index',      '', 1, 0, 'C', '0', '0', 'system:config:list',      'edit',          'admin', sysdate(), '', null, '参数设置菜单');
insert into sys_menu values('107',  '通知公示', '1',   '8', 'notice',     'system/notice/index',      '', 1, 0, 'C', '0', '0', 'system:notice:list',      'message',       'admin', sysdate(), '', null, '通知公示菜单');
insert into sys_menu values('108',  '日志管理', '1',   '9', 'log',        '',                         '', 1, 0, 'M', '0', '0', '',                        'log',           'admin', sysdate(), '', null, '日志管理菜单');
insert into sys_menu values('109',  '在线用户', '2',   '1', 'online',     'monitor/online/index',     '', 1, 0, 'C', '0', '0', 'monitor:online:list',     'online',        'admin', sysdate(), '', null, '在线用户菜单');
insert into sys_menu values('110',  '定时任务', '2',   '2', 'job',        'monitor/job/index',        '', 1, 0, 'C', '0', '0', 'monitor:job:list',        'job',           'admin', sysdate(), '', null, '定时任务菜单');
insert into sys_menu values('111',  '数据监控', '2',   '3', 'druid',      'monitor/druid/index',      '', 1, 0, 'C', '0', '0', 'monitor:druid:list',      'druid',         'admin', sysdate(), '', null, '数据监控菜单');
insert into sys_menu values('112',  '服务监控', '2',   '4', 'server',     'monitor/server/index',     '', 1, 0, 'C', '0', '0', 'monitor:server:list',     'server',        'admin', sysdate(), '', null, '服务监控菜单');
insert into sys_menu values('113',  '缓存监控', '2',   '5', 'cache',      'monitor/cache/index',      '', 1, 0, 'C', '0', '0', 'monitor:cache:list',      'redis',         'admin', sysdate(), '', null, '缓存监控菜单');
insert into sys_menu values('114',  '缓存列表', '2',   '6', 'cacheList',  'monitor/cache/list',       '', 1, 0, 'C', '0', '0', 'monitor:cache:list',      'redis-list',    'admin', sysdate(), '', null, '缓存列表菜单');
insert into sys_menu values('115',  '表单构建', '3',   '1', 'build',      'tool/build/index',         '', 1, 0, 'C', '0', '0', 'tool:build:list',         'build',         'admin', sysdate(), '', null, '表单构建菜单');
insert into sys_menu values('116',  '代码生成', '3',   '2', 'gen',        'tool/gen/index',           '', 1, 0, 'C', '0', '0', 'tool:gen:list',           'code',          'admin', sysdate(), '', null, '代码生成菜单');
insert into sys_menu values('117',  '系统接口', '3',   '3', 'swagger',    'tool/swagger/index',       '', 1, 0, 'C', '0', '0', 'tool:swagger:list',       'swagger',       'admin', sysdate(), '', null, '系统接口菜单');
insert into sys_menu values('118',  '人员信息', '7',   '1', 'people',	  'oa/staff/index',       	  '', 1, 0, 'C', '0', '0', 'system:user:list',        'peoples',       'admin', sysdate(), '', null, '人员信息菜单');
insert into sys_menu values('119',  '岗位工资', '7',   '2', 'salary',     'oa/staff/salary',       	  '', 1, 0, 'C', '0', '0', 'oa:salary:list',       	  'money',         'admin', sysdate(), '', null, '岗位工资菜单');
insert into sys_menu values('120', 	'分管调整', '7',   '3', 'manage',	  'oa/manage/index',		  '', 1, 0, 'C', '0', '0', 'oa:manage:list',	  	  'tree', 		   'admin', sysdate(), '', null, '一张图菜单');
insert into sys_menu values('121', 	'仪器设备', '8',   '1', 'equipment',  'oa/device/index', 		  '', 1, 0, 'C', '0', '0', 'oa:device:list', 		  'equipment',	   'admin', sysdate(), '', null, '仪器设备菜单');
insert into sys_menu values('122', 	'办公设备', '8',   '2', 'supply',	  'oa/supply/index', 		  '', 1, 0, 'C', '0', '0', 'oa:supply:list', 		  'desktop',	   'admin', sysdate(), '', null, '办公设备菜单');
insert into sys_menu values('123', 	'申领记录', '8',   '3', 'approval',	  'oa/device/approval',		  '', 1, 0, 'C', '0', '0', 'oa:deviceApproval:list',  'form',		   'admin', sysdate(), '', null, '申领记录菜单');
insert into sys_menu values('124', 	'维保检定', '8',   '4', 'expense',	  'oa/device/expense',		  '', 1, 0, 'C', '0', '0', 'oa:deviceExpense:list',	  'flower',		   'admin', sysdate(), '', null, '维保检定菜单');
insert into sys_menu values('125', 	'移交记录', '8',   '5', 'handover',	  'oa/supply/handover',		  '', 1, 0, 'C', '0', '0','oa:deviceHandover:list',	  'pass',		   'admin', sysdate(), '', null, '移交记录菜单');
insert into sys_menu values('126', 	'设备报废', '8',   '6', 'scrap',	  'oa/device/scrap',	  	  '', 1, 0, 'C', '0', '0', 'oa:deviceScrap:list',	  'delete',		   'admin', sysdate(), '', null, '设备报废菜单');
insert into sys_menu values('127', 	'车辆信息', '9',   '1', 'index',	  'oa/car/index', 			  '', 1, 0, 'C', '0', '0', 'oa:car:list', 			  'car',		   'admin', sysdate(), '', null, '车辆信息菜单');
insert into sys_menu values('128', 	'用车记录', '9',   '2', 'approval',	  'oa/car/approval',		  '', 1, 0, 'C', '0', '0', 'oa:carApproval:list',	  'form',		   'admin', sysdate(), '', null, '用车记录菜单');
insert into sys_menu values('129', 	'维保记录', '9',   '3', 'expense',	  'oa/car/expense',			  '', 1, 0, 'C', '0', '0', 'oa:carExpense:list',	  'flower',		   'admin', sysdate(), '', null, '维保记录菜单');
insert into sys_menu values('130', 	'车辆报废', '9',   '4', 'scrap',	  'oa/car/scrap',	  	  	  '', 1, 0, 'C', '0', '0', 'oa:deviceScrap:list',	  'delete',		   'admin', sysdate(), '', null, '车辆报废菜单');
insert into sys_menu values('131', 	'投标登记', '5',   '1', 'tender',	  'oa/tender/index', 		  '', 1, 0, 'C', '0', '0', 'oa:tender:list',		  'guide',		   'admin', sysdate(), '', null, '投标登记菜单');
insert into sys_menu values('132', 	'合作单位', '5',   '4', 'partner',	  'oa/partner/index',  		  '', 1, 0, 'C', '0', '0', 'oa:partner:list', 		  'titles',		   'admin', sysdate(), '', NULL, '合作单位菜单');
insert into sys_menu values('133', 	'承接合同', '10',  '1', 'contract',	  'oa/contract/index',	  	  '', 1, 0, 'C', '0', '0', 'oa:contract:list',	  	  'documentation', 'admin', sysdate(), '', null, '承包合同菜单');
insert into sys_menu values('134', 	'分包合同', '10',  '2', 'subContract','oa/contract/subContract',  '', 1, 0, 'C', '0', '0', 'oa:subContract:list',	  'documentation', 'admin', sysdate(), '', null, '分包合同菜单');
insert into sys_menu values('135', 	'投标保证金','11', '1', 'tender',	  'oa/deposit/tender',  	  '', 1, 0, 'C', '0', '0', 'oa:deposit:list',	  	  'cost', 		   'admin', sysdate(), '', null, '投标保证金菜单');
insert into sys_menu values('136', 	'合同保证金','11', '2', 'contract',   'oa/deposit/contract',	  '', 1, 0, 'C', '0', '0', 'oa:deposit:list',	  	  'cost',		   'admin', sysdate(), '', null, '合同保证金菜单');
insert into sys_menu values('137', 	'测绘项目台账','12','1', 'project',	  'oa/project/index',		  '', 1, 0, 'C', '0', '0', 'oa:project:list',		  'list',	   	   'admin', sysdate(), '', null, '测绘项目台账菜单');
insert into sys_menu values('138', 	'品牌项目台账','12','2', 'brand',	  'oa/brand/brandProject',	  '', 1, 0, 'C', '0', '0', 'oa:brand:list',   		  'branding',	   'admin', sysdate(), '', null, '品牌项目台账菜单');
insert into sys_menu values('139', 	'项目变更', '12',  '3', 'change',	  'oa/project/change', 		  '', 1, 0, 'C', '0', '0', 'oa:change:list',		  'refresh',	   'admin', sysdate(), '', null, '项目变更菜单');
insert into sys_menu values('140', 	'安全交底', '13',  '1', 'safe',		  'oa/safe/index', 			  '', 1, 0, 'C', '0', '0', 'oa:safe:list',			  'validCode',	   'admin', sysdate(), '', null, '安全交底菜单');
insert into sys_menu values('141', 	'安全要求', '13',  '2', 'request',	  'oa/safe/request', 		  '', 1, 0, 'C', '0', '0', 'oa:request:list',		  'checkbox',	   'admin', sysdate(), '', null, '安全要求菜单');
insert into sys_menu values('142', 	'安全日报', '13',  '3', 'report',	  'oa/safe/report', 		  '', 1, 0, 'C', '0', '0', 'oa:report:list', 		  'date',		   'admin', sysdate(), '', null, '安全日报菜单');
insert into sys_menu values('143', 	'技术交底', '14',  '1', 'technical',  'oa/technical/index', 	  '', 1, 0, 'C', '0', '0', 'oa:technical:list',		  'clipboard',	   'admin', sysdate(), '', null, '技术交底菜单');
insert into sys_menu values('144', 	'技术方案', '14',  '2', 'plan',		  'oa/technical/plan', 		  '', 1, 0, 'C', '0', '0', 'oa:plan:list',			  'nested',		   'admin', sysdate(), '', null, '技术方案菜单');
insert into sys_menu values('145', 	'成果归档', '15',  '1', 'archive',	  'oa/archive/index',		  '', 1, 0, 'C', '0', '0', 'oa:archive:list',	  	  'education',	   'admin', sysdate(), '', null, '成果归档菜单');
insert into sys_menu values('146', 	'资料管理', '15',  '2', 'file',	  	  'file/filesProject/index',  '', 1, 0, 'C', '0', '0', 'oa:archive:list',	  	  'excel',	   	   'admin', sysdate(), '', null, '资料管理菜单');
insert into sys_menu values('147', 	'一张图', 	'15',  '3', 'gis',	  	  'file/index',		  	  	  '', 1, 0, 'C', '0', '0', '',	  	  	  			  'international', 'admin', sysdate(), '', null, '一张图菜单');
insert into sys_menu values('148', 	'预算方案', '16',  '1', 'scheme',	  'oa/budget/index', 		  '', 1, 0, 'C', '0', '0', 'oa:budget:list', 		  'build',		   'admin', sysdate(), '', null, '预算方案菜单');
insert into sys_menu values('149', 	'借款管理', '16',  '2', 'borrow',	  'oa/borrow/index', 		  '', 1, 0, 'C', '0', '0', 'oa:borrow:list',		  'borrow',		   'admin', sysdate(), '', null, '借款管理菜单');
insert into sys_menu values('150', 	'生产结算', '16',  '3', 'settle',	  'oa/settle/index',		  '', 1, 0, 'C', '0', '0', 'oa:settle:list',	  	  'settle',		   'admin', sysdate(), '', null, '生产结算菜单');
insert into sys_menu values('151', 	'结算单价', '16',  '4', 'price',	  'oa/price/index',		  	  '', 1, 0, 'C', '0', '0', 'oa:price:list',	  	  	  'price',		   'admin', sysdate(), '', null, '结算单价菜单');
insert into sys_menu values('152', 	'考核管理', '7',   '4', 'assess',	  'oa/assess/index', 		  '', 1, 0, 'C', '0', '0', 'oa:assess:list',		  'logininfor',	   'admin', sysdate(), '', null, '考核管理菜单');
-- 三级菜单
insert into sys_menu values('500',  '操作日志', '108', '1', 'operlog',    'monitor/operlog/index',    '', 1, 0, 'C', '0', '0', 'monitor:operlog:list',    'form',          'admin', sysdate(), '', null, '操作日志菜单');
insert into sys_menu values('501',  '登录日志', '108', '2', 'logininfor', 'monitor/logininfor/index', '', 1, 0, 'C', '0', '0', 'monitor:logininfor:list', 'logininfor',    'admin', sysdate(), '', null, '登录日志菜单');
-- 用户管理按钮
insert into sys_menu values('1000', '用户列表', '100', '0',  '', '', '', 1, 0, 'F', '0', '0', 'system:user:list',           '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1001', '用户查询', '100', '1',  '', '', '', 1, 0, 'F', '0', '0', 'system:user:query',          '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1002', '用户新增', '100', '2',  '', '', '', 1, 0, 'F', '0', '0', 'system:user:add',            '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1003', '用户修改', '100', '3',  '', '', '', 1, 0, 'F', '0', '0', 'system:user:edit',           '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1004', '用户删除', '100', '4',  '', '', '', 1, 0, 'F', '0', '0', 'system:user:remove',         '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1005', '用户导出', '100', '5',  '', '', '', 1, 0, 'F', '0', '0', 'system:user:export',         '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1006', '用户导入', '100', '6',  '', '', '', 1, 0, 'F', '0', '0', 'system:user:import',         '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1007', '重置密码', '100', '7',  '', '', '', 1, 0, 'F', '0', '0', 'system:user:resetPwd',       '#', 'admin', sysdate(), '', null, '');
-- 角色管理按钮
insert into sys_menu values('1008', '角色查询', '101', '1',  '', '', '', 1, 0, 'F', '0', '0', 'system:role:query',          '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1009', '角色新增', '101', '2',  '', '', '', 1, 0, 'F', '0', '0', 'system:role:add',            '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1010', '角色修改', '101', '3',  '', '', '', 1, 0, 'F', '0', '0', 'system:role:edit',           '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1011', '角色删除', '101', '4',  '', '', '', 1, 0, 'F', '0', '0', 'system:role:remove',         '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1012', '角色导出', '101', '5',  '', '', '', 1, 0, 'F', '0', '0', 'system:role:export',         '#', 'admin', sysdate(), '', null, '');
-- 菜单管理按钮
insert into sys_menu values('1013', '菜单查询', '102', '1',  '', '', '', 1, 0, 'F', '0', '0', 'system:menu:query',          '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1014', '菜单新增', '102', '2',  '', '', '', 1, 0, 'F', '0', '0', 'system:menu:add',            '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1015', '菜单修改', '102', '3',  '', '', '', 1, 0, 'F', '0', '0', 'system:menu:edit',           '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1016', '菜单删除', '102', '4',  '', '', '', 1, 0, 'F', '0', '0', 'system:menu:remove',         '#', 'admin', sysdate(), '', null, '');
-- 部门管理按钮
insert into sys_menu values('1017', '部门查询', '103', '1',  '', '', '', 1, 0, 'F', '0', '0', 'system:dept:list',          	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1018', '部门查询', '103', '1',  '', '', '', 1, 0, 'F', '0', '0', 'system:dept:query',          '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1019', '部门新增', '103', '2',  '', '', '', 1, 0, 'F', '0', '0', 'system:dept:add',            '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1020', '部门修改', '103', '3',  '', '', '', 1, 0, 'F', '0', '0', 'system:dept:edit',           '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1021', '部门删除', '103', '4',  '', '', '', 1, 0, 'F', '0', '0', 'system:dept:remove',         '#', 'admin', sysdate(), '', null, '');
-- 岗位管理按钮
insert into sys_menu values('1022', '岗位查询', '104', '1',  '', '', '', 1, 0, 'F', '0', '0', 'system:post:query',          '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1023', '岗位新增', '104', '2',  '', '', '', 1, 0, 'F', '0', '0', 'system:post:add',            '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1024', '岗位修改', '104', '3',  '', '', '', 1, 0, 'F', '0', '0', 'system:post:edit',           '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1025', '岗位删除', '104', '4',  '', '', '', 1, 0, 'F', '0', '0', 'system:post:remove',         '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1026', '岗位导出', '104', '5',  '', '', '', 1, 0, 'F', '0', '0', 'system:post:export',         '#', 'admin', sysdate(), '', null, '');
-- 字典管理按钮
insert into sys_menu values('1027', '字典查询', '105', '1', '#', '', '', 1, 0, 'F', '0', '0', 'system:dict:query',          '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1028', '字典新增', '105', '2', '#', '', '', 1, 0, 'F', '0', '0', 'system:dict:add',            '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1029', '字典修改', '105', '3', '#', '', '', 1, 0, 'F', '0', '0', 'system:dict:edit',           '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1030', '字典删除', '105', '4', '#', '', '', 1, 0, 'F', '0', '0', 'system:dict:remove',         '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1031', '字典导出', '105', '5', '#', '', '', 1, 0, 'F', '0', '0', 'system:dict:export',         '#', 'admin', sysdate(), '', null, '');
-- 参数设置按钮
insert into sys_menu values('1032', '参数查询', '106', '1', '#', '', '', 1, 0, 'F', '0', '0', 'system:config:query',        '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1033', '参数新增', '106', '2', '#', '', '', 1, 0, 'F', '0', '0', 'system:config:add',          '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1034', '参数修改', '106', '3', '#', '', '', 1, 0, 'F', '0', '0', 'system:config:edit',         '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1035', '参数删除', '106', '4', '#', '', '', 1, 0, 'F', '0', '0', 'system:config:remove',       '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1036', '参数导出', '106', '5', '#', '', '', 1, 0, 'F', '0', '0', 'system:config:export',       '#', 'admin', sysdate(), '', null, '');
-- 通知公示按钮
insert into sys_menu values('1037', '公示查询', '107', '1', '#', '', '', 1, 0, 'F', '0', '0', 'system:notice:query',        '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1038', '公示新增', '107', '2', '#', '', '', 1, 0, 'F', '0', '0', 'system:notice:add',          '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1039', '公示修改', '107', '3', '#', '', '', 1, 0, 'F', '0', '0', 'system:notice:edit',         '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1040', '公示删除', '107', '4', '#', '', '', 1, 0, 'F', '0', '0', 'system:notice:remove',       '#', 'admin', sysdate(), '', null, '');
-- 操作日志按钮
insert into sys_menu values('1041', '操作查询', '500', '1', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:operlog:query',      '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1042', '操作删除', '500', '2', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:operlog:remove',     '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1043', '日志导出', '500', '3', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:operlog:export',     '#', 'admin', sysdate(), '', null, '');
-- 登录日志按钮
insert into sys_menu values('1044', '登录查询', '501', '1', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:logininfor:query',   '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1045', '登录删除', '501', '2', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:logininfor:remove',  '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1046', '日志导出', '501', '3', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:logininfor:export',  '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1047', '账户解锁', '501', '4', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:logininfor:unlock',  '#', 'admin', sysdate(), '', null, '');
-- 在线用户按钮
insert into sys_menu values('1048', '在线查询', '109', '1', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:online:query',       '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1049', '批量强退', '109', '2', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:online:batchLogout', '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1050', '单条强退', '109', '3', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:online:forceLogout', '#', 'admin', sysdate(), '', null, '');
-- 定时任务按钮
insert into sys_menu values('1051', '任务查询', '110', '1', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:job:query',          '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1052', '任务新增', '110', '2', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:job:add',            '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1053', '任务修改', '110', '3', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:job:edit',           '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1054', '任务删除', '110', '4', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:job:remove',         '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1055', '状态修改', '110', '5', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:job:changeStatus',   '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1056', '任务导出', '110', '6', '#', '', '', 1, 0, 'F', '0', '0', 'monitor:job:export',         '#', 'admin', sysdate(), '', null, '');
-- 代码生成按钮
insert into sys_menu values('1057', '生成查询', '116', '1', '#', '', '', 1, 0, 'F', '0', '0', 'tool:gen:query',             '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1058', '生成修改', '116', '2', '#', '', '', 1, 0, 'F', '0', '0', 'tool:gen:edit',              '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1059', '生成删除', '116', '3', '#', '', '', 1, 0, 'F', '0', '0', 'tool:gen:remove',            '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1060', '导入代码', '116', '4', '#', '', '', 1, 0, 'F', '0', '0', 'tool:gen:import',            '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1061', '预览代码', '116', '5', '#', '', '', 1, 0, 'F', '0', '0', 'tool:gen:preview',           '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1062', '生成代码', '116', '6', '#', '', '', 1, 0, 'F', '0', '0', 'tool:gen:code',              '#', 'admin', sysdate(), '', null, '');
-- 岗位工资按钮
insert into sys_menu values('1063', '工资查询', '119', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:salary:query',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1064', '工资新增', '119', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:salary:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1065', '工资修改', '119', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:salary:edit',            	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1066', '工资删除', '119', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:salary:remove',          	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1067', '工资导出', '119', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:salary:export',          	'#', 'admin', sysdate(), '', null, '');
-- 设备管理按钮
insert into sys_menu values('1068', '设备查询', '121', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:device:query',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1069', '设备新增', '121', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:device:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1070', '设备修改', '121', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:device:edit',            	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1071', '设备删除', '121', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:device:remove',          	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1072', '设备导出', '121', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:device:export',          	'#', 'admin', sysdate(), '', null, '');
-- 设备记录按钮
insert into sys_menu values('1073', '记录查询', '124', '1', '#', '', '', 1, 0, 'F', '0', '0', 'device:record:query',		'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1074', '记录新增', '124', '2', '#', '', '', 1, 0, 'F', '0', '0', 'device:record:add',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1075', '记录修改', '124', '3', '#', '', '', 1, 0, 'F', '0', '0', 'device:record:edit',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1076', '记录删除', '124', '4', '#', '', '', 1, 0, 'F', '0', '0', 'device:record:remove',		'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1077', '记录导出', '124', '5', '#', '', '', 1, 0, 'F', '0', '0', 'device:record:export',		'#', 'admin', sysdate(), '', null, '');
-- 车辆管理按钮
insert into sys_menu values('1078', '车辆查询', '127', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:car:query',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1079', '车辆新增', '127', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:car:add',					'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1080', '车辆修改', '127', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:car:edit',              	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1081', '车辆删除', '127', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:car:remove',              '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1082', '车辆导出', '127', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:car:export',              '#', 'admin', sysdate(), '', null, '');
-- 车辆记录按钮
insert into sys_menu values('1083', '记录查询', '129', '1', '#', '', '', 1, 0, 'F', '0', '0', 'car:record:query',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1084', '记录新增', '129', '2', '#', '', '', 1, 0, 'F', '0', '0', 'car:record:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1085', '记录修改', '129', '3', '#', '', '', 1, 0, 'F', '0', '0', 'car:record:edit',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1086', '记录删除', '129', '4', '#', '', '', 1, 0, 'F', '0', '0', 'car:record:remove',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1087', '记录导出', '129', '5', '#', '', '', 1, 0, 'F', '0', '0', 'car:record:export',			'#', 'admin', sysdate(), '', null, '');
-- 投标管理按钮
insert into sys_menu values('1088', '投标查询', '131', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:tender:query',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1089', '投标新增', '131', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:tender:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1090', '投标修改', '131', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:tender:edit',            	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1091', '投标删除', '131', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:tender:remove',          	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1092', '投标导出', '131', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:tender:export',          	'#', 'admin', sysdate(), '', null, '');
-- 合作单位按钮
insert into sys_menu values('1093', '合作单位查询', '132', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:partner:query',		'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1094', '合作单位新增', '132', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:partner:add',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1095', '合作单位修改', '132', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:partner:edit',        '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1096', '合作单位删除', '132', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:partner:remove',      '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1097', '合作单位导出', '132', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:partner:export',      '#', 'admin', sysdate(), '', null, '');
-- 承包合同按钮
insert into sys_menu values('1098', '承包合同查询', '133', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:contract:query',		'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1099', '承包合同新增', '133', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:contract:add',		'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1100', '承包合同修改', '133', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:contract:edit',		'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1101', '承包合同删除', '133', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:contract:remove',		'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1102', '承包合同导出', '133', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:contract:export',		'#', 'admin', sysdate(), '', null, '');
-- 分包合同按钮
insert into sys_menu values('1103', '分包合同查询', '134', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:subContract:query',	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1104', '分包合同新增', '134', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:subContract:add',		'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1105', '分包合同修改', '134', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:subContract:edit',	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1106', '分包合同删除', '134', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:subContract:remove',	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1107', '分包合同导出', '134', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:subContract:export',	'#', 'admin', sysdate(), '', null, '');
-- 保证金按钮
insert into sys_menu values('1108', '保证金查询', '11', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:deposit:query',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1109', '保证金新增', '11', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:deposit:add',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1110', '保证金修改', '11', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:deposit:edit',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1111', '保证金删除', '11', '6', '#', '', '', 1, 0, 'F', '0', '0', 'oa:deposit:remove',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1112', '保证金导出', '11', '7', '#', '', '', 1, 0, 'F', '0', '0', 'oa:deposit:export',			'#', 'admin', sysdate(), '', null, '');
-- 测绘项目按钮
insert into sys_menu values('1113', '项目查询', '137', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:project:query',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1114', '所有项目查询', '137', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:allproject:query',	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1115', '部门项目查询', '137', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:deptproject:query',	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1116', '项目新增', '137', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:project:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1117', '项目修改', '137', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:project:edit',            '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1118', '项目删除', '137', '6', '#', '', '', 1, 0, 'F', '0', '0', 'oa:project:remove',          '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1119', '项目导出', '137', '7', '#', '', '', 1, 0, 'F', '0', '0', 'oa:project:export',          '#', 'admin', sysdate(), '', null, '');
-- 品牌项目按钮
insert into sys_menu values('1120', '品牌项目查询', '138', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:brandProject:query',	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1121', '品牌项目新增', '138', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:brandProject:add',	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1122', '品牌项目修改', '138', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:brandProject:edit', 	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1123', '品牌项目删除', '138', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:brandProject:remove',	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1124', '品牌项目导出', '138', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:brandProject:export',	'#', 'admin', sysdate(), '', null, '');
-- 项目变更按钮
insert into sys_menu values('1125', '变更查询', '139', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:change:query',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1126', '变更新增', '139', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:change:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1127', '变更修改', '139', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:change:edit',            	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1128', '变更删除', '139', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:change:remove',          	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1129', '变更导出', '139', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:change:export',          	'#', 'admin', sysdate(), '', null, '');
-- 安全交底按钮
insert into sys_menu values('1130', '交底查询', '140', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:safe:query',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1131', '交底新增', '140', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:safe:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1132', '交底修改', '140', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:safe:edit',            	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1133', '交底删除', '140', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:safe:remove',          	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1134', '交底导出', '140', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:safe:export',          	'#', 'admin', sysdate(), '', null, '');
-- 安全要求按钮
insert into sys_menu values('1135', '要求查询', '141', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:safe:query',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1136', '要求新增', '141', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:safe:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1137', '要求修改', '141', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:safe:edit',            	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1138', '要求删除', '141', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:safe:remove',          	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1139', '要求导出', '141', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:safe:export',          	'#', 'admin', sysdate(), '', null, '');
-- 安全报告按钮
insert into sys_menu values('1140', '报告查询', '142', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:report:query',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1141', '报告新增', '142', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:report:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1142', '报告修改', '142', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:report:edit',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1143', '报告删除', '142', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:report:remove',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1144', '报告导出', '142', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:report:export',			'#', 'admin', sysdate(), '', null, '');
-- 技术交底按钮
insert into sys_menu values('1145', '交底查询', '143', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:technical:query',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1146', '交底新增', '143', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:technical:add',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1147', '交底修改', '143', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:technical:edit',          '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1148', '交底删除', '143', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:technical:remove',        '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1149', '交底导出', '143', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:technical:export',        '#', 'admin', sysdate(), '', null, '');
-- 技术方案按钮
insert into sys_menu values('1150', '方案查询', '144', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:plan:query',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1151', '方案新增', '144', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:plan:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1152', '方案修改', '144', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:plan:edit',           	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1153', '方案删除', '144', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:plan:remove',         	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1154', '方案导出', '144', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:plan:export',         	'#', 'admin', sysdate(), '', null, '');
-- 成果归档按钮
insert into sys_menu values('1155', '归档查询', '145', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:archive:query',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1156', '归档新增', '145', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:archive:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1157', '归档修改', '145', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:archive:edit',            '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1158', '归档删除', '145', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:archive:remove',          '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1159', '归档导出', '145', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:archive:export',          '#', 'admin', sysdate(), '', null, '');
-- 资料管理按钮
insert into sys_menu values('1160', '资料查询', '146', '1', '#', '', '', 1, 0, 'F', '0', '0', 'file:achievement:query',		'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1161', '资料新增', '146', '2', '#', '', '', 1, 0, 'F', '0', '0', 'file:achievement:add',		'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1162', '资料修改', '146', '3', '#', '', '', 1, 0, 'F', '0', '0', 'file:achievement:edit',      '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1163', '资料删除', '146', '4', '#', '', '', 1, 0, 'F', '0', '0', 'file:achievement:remove',    '#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1164', '资料导出', '146', '5', '#', '', '', 1, 0, 'F', '0', '0', 'file:achievement:export',    '#', 'admin', sysdate(), '', null, '');
-- 预算管理按钮
insert into sys_menu values('1165', '预算查询', '148', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:budget:query',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1166', '预算新增', '148', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:budget:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1167', '预算修改', '148', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:budget:edit',            	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1168', '预算删除', '148', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:budget:remove',          	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1169', '预算导出', '148', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:budget:export',          	'#', 'admin', sysdate(), '', null, '');
-- 借款管理按钮
insert into sys_menu values('1170', '借款查询', '149', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:borrow:query',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1171', '借款新增', '149', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:borrow:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1172', '借款修改', '149', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:borrow:edit',            	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1173', '借款删除', '149', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:borrow:remove',          	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1174', '借款导出', '149', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:borrow:export',          	'#', 'admin', sysdate(), '', null, '');
-- 结算管理按钮
insert into sys_menu values('1175', '结算查询', '150', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:settle:query',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1176', '结算新增', '150', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:settle:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1177', '结算修改', '150', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:settle:edit', 			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1178', '结算删除', '150', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:settle:remove',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1179', '结算导出', '150', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:settle:export',			'#', 'admin', sysdate(), '', null, '');
-- 结算单价按钮
insert into sys_menu values('1180', '单价查询', '151', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:price:query',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1181', '单价新增', '151', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:price:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1182', '单价修改', '151', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:price:edit',            	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1183', '单价删除', '151', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:price:remove',          	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1184', '单价导出', '151', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:price:export',          	'#', 'admin', sysdate(), '', null, '');
-- 考核管理按钮
insert into sys_menu values('1185', '考核查询', '152', '1', '#', '', '', 1, 0, 'F', '0', '0', 'oa:assess:query',			'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1186', '考核新增', '152', '2', '#', '', '', 1, 0, 'F', '0', '0', 'oa:assess:add',				'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1187', '考核修改', '152', '3', '#', '', '', 1, 0, 'F', '0', '0', 'oa:assess:edit',            	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1188', '考核删除', '152', '4', '#', '', '', 1, 0, 'F', '0', '0', 'oa:assess:remove',          	'#', 'admin', sysdate(), '', null, '');
insert into sys_menu values('1189', '考核导出', '152', '5', '#', '', '', 1, 0, 'F', '0', '0', 'oa:assess:export',          	'#', 'admin', sysdate(), '', null, '');

-- ----------------------------
-- 6、用户和角色关联表  用户N-1角色
-- ----------------------------
drop table if exists sys_user_role;
create table sys_user_role (
  user_id   bigint(20) not null comment '用户ID',
  role_id   bigint(20) not null comment '角色ID',
  primary key(user_id, role_id)
) engine=innodb comment = '用户和角色关联表';

-- ----------------------------
-- 初始化-用户和角色关联表数据
-- ----------------------------
INSERT INTO `sys_user_role` VALUES (1, 1);
INSERT INTO `sys_user_role` VALUES (2, 2);
INSERT INTO `sys_user_role` VALUES (2, 7);
INSERT INTO `sys_user_role` VALUES (3, 2);
INSERT INTO `sys_user_role` VALUES (3, 7);
INSERT INTO `sys_user_role` VALUES (4, 2);
INSERT INTO `sys_user_role` VALUES (4, 7);
INSERT INTO `sys_user_role` VALUES (5, 2);
INSERT INTO `sys_user_role` VALUES (5, 7);
INSERT INTO `sys_user_role` VALUES (6, 2);
INSERT INTO `sys_user_role` VALUES (6, 7);
INSERT INTO `sys_user_role` VALUES (7, 2);
INSERT INTO `sys_user_role` VALUES (7, 7);
INSERT INTO `sys_user_role` VALUES (8, 2);
INSERT INTO `sys_user_role` VALUES (8, 3);
INSERT INTO `sys_user_role` VALUES (8, 5);
INSERT INTO `sys_user_role` VALUES (8, 7);
INSERT INTO `sys_user_role` VALUES (8, 13);
INSERT INTO `sys_user_role` VALUES (9, 2);
INSERT INTO `sys_user_role` VALUES (9, 7);
INSERT INTO `sys_user_role` VALUES (10, 2);
INSERT INTO `sys_user_role` VALUES (10, 7);
INSERT INTO `sys_user_role` VALUES (11, 2);
INSERT INTO `sys_user_role` VALUES (11, 7);
INSERT INTO `sys_user_role` VALUES (12, 2);
INSERT INTO `sys_user_role` VALUES (12, 7);
INSERT INTO `sys_user_role` VALUES (13, 2);
INSERT INTO `sys_user_role` VALUES (13, 7);
INSERT INTO `sys_user_role` VALUES (14, 2);
INSERT INTO `sys_user_role` VALUES (14, 7);
INSERT INTO `sys_user_role` VALUES (14, 9);
INSERT INTO `sys_user_role` VALUES (14, 13);
INSERT INTO `sys_user_role` VALUES (15, 2);
INSERT INTO `sys_user_role` VALUES (15, 7);
INSERT INTO `sys_user_role` VALUES (15, 8);
INSERT INTO `sys_user_role` VALUES (15, 12);
INSERT INTO `sys_user_role` VALUES (15, 13);
INSERT INTO `sys_user_role` VALUES (16, 2);
INSERT INTO `sys_user_role` VALUES (16, 5);
INSERT INTO `sys_user_role` VALUES (17, 2);
INSERT INTO `sys_user_role` VALUES (17, 4);
INSERT INTO `sys_user_role` VALUES (18, 2);
INSERT INTO `sys_user_role` VALUES (18, 3);
INSERT INTO `sys_user_role` VALUES (19, 2);
INSERT INTO `sys_user_role` VALUES (20, 2);
INSERT INTO `sys_user_role` VALUES (20, 8);
INSERT INTO `sys_user_role` VALUES (20, 13);
INSERT INTO `sys_user_role` VALUES (21, 2);
INSERT INTO `sys_user_role` VALUES (21, 8);
INSERT INTO `sys_user_role` VALUES (21, 13);
INSERT INTO `sys_user_role` VALUES (22, 2);
INSERT INTO `sys_user_role` VALUES (22, 8);
INSERT INTO `sys_user_role` VALUES (23, 2);
INSERT INTO `sys_user_role` VALUES (23, 8);
INSERT INTO `sys_user_role` VALUES (24, 2);
INSERT INTO `sys_user_role` VALUES (24, 8);
INSERT INTO `sys_user_role` VALUES (25, 2);
INSERT INTO `sys_user_role` VALUES (25, 8);
INSERT INTO `sys_user_role` VALUES (26, 2);
INSERT INTO `sys_user_role` VALUES (26, 8);
INSERT INTO `sys_user_role` VALUES (27, 2);
INSERT INTO `sys_user_role` VALUES (28, 2);
INSERT INTO `sys_user_role` VALUES (28, 9);
INSERT INTO `sys_user_role` VALUES (28, 13);
INSERT INTO `sys_user_role` VALUES (29, 2);
INSERT INTO `sys_user_role` VALUES (30, 2);
INSERT INTO `sys_user_role` VALUES (31, 2);
INSERT INTO `sys_user_role` VALUES (32, 2);
INSERT INTO `sys_user_role` VALUES (32, 13);
INSERT INTO `sys_user_role` VALUES (33, 2);
INSERT INTO `sys_user_role` VALUES (34, 2);
INSERT INTO `sys_user_role` VALUES (35, 2);
INSERT INTO `sys_user_role` VALUES (36, 2);
INSERT INTO `sys_user_role` VALUES (37, 2);
INSERT INTO `sys_user_role` VALUES (38, 2);
INSERT INTO `sys_user_role` VALUES (39, 2);
INSERT INTO `sys_user_role` VALUES (39, 13);
INSERT INTO `sys_user_role` VALUES (40, 2);
INSERT INTO `sys_user_role` VALUES (41, 2);
INSERT INTO `sys_user_role` VALUES (42, 2);
INSERT INTO `sys_user_role` VALUES (43, 2);
INSERT INTO `sys_user_role` VALUES (44, 2);
INSERT INTO `sys_user_role` VALUES (45, 2);
INSERT INTO `sys_user_role` VALUES (46, 2);
INSERT INTO `sys_user_role` VALUES (46, 13);
INSERT INTO `sys_user_role` VALUES (46, 10);
INSERT INTO `sys_user_role` VALUES (47, 2);
INSERT INTO `sys_user_role` VALUES (48, 2);
INSERT INTO `sys_user_role` VALUES (49, 2);
INSERT INTO `sys_user_role` VALUES (50, 2);
INSERT INTO `sys_user_role` VALUES (51, 2);
INSERT INTO `sys_user_role` VALUES (52, 2);
INSERT INTO `sys_user_role` VALUES (52, 6);
INSERT INTO `sys_user_role` VALUES (53, 2);
INSERT INTO `sys_user_role` VALUES (54, 2);
INSERT INTO `sys_user_role` VALUES (55, 2);
INSERT INTO `sys_user_role` VALUES (56, 2);
INSERT INTO `sys_user_role` VALUES (57, 2);
INSERT INTO `sys_user_role` VALUES (58, 2);
INSERT INTO `sys_user_role` VALUES (58, 11);
INSERT INTO `sys_user_role` VALUES (59, 2);
INSERT INTO `sys_user_role` VALUES (59, 13);
INSERT INTO `sys_user_role` VALUES (60, 2);
INSERT INTO `sys_user_role` VALUES (60, 13);
INSERT INTO `sys_user_role` VALUES (61, 2);
INSERT INTO `sys_user_role` VALUES (61, 13);
INSERT INTO `sys_user_role` VALUES (62, 2);
INSERT INTO `sys_user_role` VALUES (63, 2);
INSERT INTO `sys_user_role` VALUES (64, 2);
INSERT INTO `sys_user_role` VALUES (65, 2);
INSERT INTO `sys_user_role` VALUES (66, 2);
INSERT INTO `sys_user_role` VALUES (67, 2);
INSERT INTO `sys_user_role` VALUES (68, 2);
INSERT INTO `sys_user_role` VALUES (69, 2);
INSERT INTO `sys_user_role` VALUES (70, 2);
INSERT INTO `sys_user_role` VALUES (71, 2);
INSERT INTO `sys_user_role` VALUES (72, 2);
INSERT INTO `sys_user_role` VALUES (73, 2);
INSERT INTO `sys_user_role` VALUES (74, 2);
INSERT INTO `sys_user_role` VALUES (75, 2);
INSERT INTO `sys_user_role` VALUES (76, 2);
INSERT INTO `sys_user_role` VALUES (77, 2);
INSERT INTO `sys_user_role` VALUES (78, 2);
INSERT INTO `sys_user_role` VALUES (79, 2);
INSERT INTO `sys_user_role` VALUES (80, 2);
INSERT INTO `sys_user_role` VALUES (81, 2);
INSERT INTO `sys_user_role` VALUES (82, 2);
INSERT INTO `sys_user_role` VALUES (83, 2);
INSERT INTO `sys_user_role` VALUES (83, 13);
INSERT INTO `sys_user_role` VALUES (84, 2);
INSERT INTO `sys_user_role` VALUES (84, 13);
INSERT INTO `sys_user_role` VALUES (85, 2);
INSERT INTO `sys_user_role` VALUES (86, 2);
INSERT INTO `sys_user_role` VALUES (87, 2);
INSERT INTO `sys_user_role` VALUES (88, 2);
INSERT INTO `sys_user_role` VALUES (89, 2);
INSERT INTO `sys_user_role` VALUES (90, 2);
INSERT INTO `sys_user_role` VALUES (91, 2);
INSERT INTO `sys_user_role` VALUES (92, 2);
INSERT INTO `sys_user_role` VALUES (93, 2);
INSERT INTO `sys_user_role` VALUES (94, 2);
INSERT INTO `sys_user_role` VALUES (95, 2);
INSERT INTO `sys_user_role` VALUES (96, 2);
INSERT INTO `sys_user_role` VALUES (97, 2);
INSERT INTO `sys_user_role` VALUES (98, 2);
INSERT INTO `sys_user_role` VALUES (99, 2);
INSERT INTO `sys_user_role` VALUES (100, 2);
INSERT INTO `sys_user_role` VALUES (101, 2);
INSERT INTO `sys_user_role` VALUES (101, 13);
INSERT INTO `sys_user_role` VALUES (102, 2);
INSERT INTO `sys_user_role` VALUES (102, 13);
INSERT INTO `sys_user_role` VALUES (103, 2);
INSERT INTO `sys_user_role` VALUES (104, 2);
INSERT INTO `sys_user_role` VALUES (105, 2);
INSERT INTO `sys_user_role` VALUES (106, 2);
INSERT INTO `sys_user_role` VALUES (107, 2);
INSERT INTO `sys_user_role` VALUES (108, 2);
INSERT INTO `sys_user_role` VALUES (109, 2);
INSERT INTO `sys_user_role` VALUES (110, 2);
INSERT INTO `sys_user_role` VALUES (111, 2);
INSERT INTO `sys_user_role` VALUES (112, 2);
INSERT INTO `sys_user_role` VALUES (113, 2);
INSERT INTO `sys_user_role` VALUES (114, 2);
INSERT INTO `sys_user_role` VALUES (115, 2);
INSERT INTO `sys_user_role` VALUES (116, 2);
INSERT INTO `sys_user_role` VALUES (116, 13);
INSERT INTO `sys_user_role` VALUES (117, 2);
INSERT INTO `sys_user_role` VALUES (118, 2);
INSERT INTO `sys_user_role` VALUES (119, 2);
INSERT INTO `sys_user_role` VALUES (120, 2);
INSERT INTO `sys_user_role` VALUES (121, 2);
INSERT INTO `sys_user_role` VALUES (122, 2);
INSERT INTO `sys_user_role` VALUES (123, 2);
INSERT INTO `sys_user_role` VALUES (124, 2);
INSERT INTO `sys_user_role` VALUES (125, 2);
INSERT INTO `sys_user_role` VALUES (126, 2);
INSERT INTO `sys_user_role` VALUES (127, 2);
INSERT INTO `sys_user_role` VALUES (128, 2);
INSERT INTO `sys_user_role` VALUES (129, 2);
INSERT INTO `sys_user_role` VALUES (130, 2);
INSERT INTO `sys_user_role` VALUES (131, 2);
INSERT INTO `sys_user_role` VALUES (132, 2);
INSERT INTO `sys_user_role` VALUES (133, 2);
INSERT INTO `sys_user_role` VALUES (134, 2);
INSERT INTO `sys_user_role` VALUES (135, 2);
INSERT INTO `sys_user_role` VALUES (136, 2);
INSERT INTO `sys_user_role` VALUES (137, 2);
INSERT INTO `sys_user_role` VALUES (138, 2);
INSERT INTO `sys_user_role` VALUES (138, 13);
INSERT INTO `sys_user_role` VALUES (139, 2);
INSERT INTO `sys_user_role` VALUES (140, 2);
INSERT INTO `sys_user_role` VALUES (141, 2);
INSERT INTO `sys_user_role` VALUES (142, 2);
INSERT INTO `sys_user_role` VALUES (142, 13);
INSERT INTO `sys_user_role` VALUES (143, 2);
INSERT INTO `sys_user_role` VALUES (144, 2);
INSERT INTO `sys_user_role` VALUES (145, 2);
INSERT INTO `sys_user_role` VALUES (146, 2);
INSERT INTO `sys_user_role` VALUES (147, 2);
INSERT INTO `sys_user_role` VALUES (148, 2);
INSERT INTO `sys_user_role` VALUES (149, 2);
INSERT INTO `sys_user_role` VALUES (150, 2);

-- ----------------------------
-- 7、角色和菜单关联表  角色1-N菜单
-- ----------------------------
drop table if exists sys_role_menu;
create table sys_role_menu (
  role_id   bigint(20) not null comment '角色ID',
  menu_id   bigint(20) not null comment '菜单ID',
  primary key(role_id, menu_id)
) engine=innodb comment = '角色和菜单关联表';

-- ----------------------------
-- 初始化-角色和菜单关联表数据
-- ----------------------------
insert into `sys_role_menu` values (2, 4);
insert into `sys_role_menu` values (2, 12);
insert into `sys_role_menu` values (2, 13);
insert into `sys_role_menu` values (2, 137);
insert into `sys_role_menu` values (2, 139);
insert into `sys_role_menu` values (2, 142);
insert into `sys_role_menu` values (2, 100);
insert into `sys_role_menu` values (2, 103);
insert into `sys_role_menu` values (2, 1000);
insert into `sys_role_menu` values (2, 1001);
insert into `sys_role_menu` values (2, 1017);
insert into `sys_role_menu` values (2, 1018);
insert into `sys_role_menu` values (2, 1068);
insert into `sys_role_menu` values (2, 1078);
insert into `sys_role_menu` values (2, 1113);
insert into `sys_role_menu` values (2, 1115);
insert into `sys_role_menu` values (2, 1125);
insert into `sys_role_menu` values (2, 1140);
insert into `sys_role_menu` values (2, 1141);
insert into `sys_role_menu` values (2, 1142);
insert into `sys_role_menu` values (2, 1143);
insert into `sys_role_menu` values (2, 1144);
insert into `sys_role_menu` values (3, 6);
insert into `sys_role_menu` values (3, 7);
insert into `sys_role_menu` values (3, 100);
insert into `sys_role_menu` values (3, 118);
insert into `sys_role_menu` values (3, 119);
insert into `sys_role_menu` values (3, 120);
insert into `sys_role_menu` values (3, 1002);
insert into `sys_role_menu` values (3, 1003);
insert into `sys_role_menu` values (3, 1004);
insert into `sys_role_menu` values (3, 1005);
insert into `sys_role_menu` values (3, 1006);
insert into `sys_role_menu` values (3, 1007);
insert into `sys_role_menu` values (3, 1063);
insert into `sys_role_menu` values (3, 1064);
insert into `sys_role_menu` values (3, 1065);
insert into `sys_role_menu` values (3, 1066);
insert into `sys_role_menu` values (3, 1067);
insert into `sys_role_menu` values (4, 6);
insert into `sys_role_menu` values (4, 8);
insert into `sys_role_menu` values (4, 121);
insert into `sys_role_menu` values (4, 122);
insert into `sys_role_menu` values (4, 123);
insert into `sys_role_menu` values (4, 124);
insert into `sys_role_menu` values (4, 125);
insert into `sys_role_menu` values (4, 126);
insert into `sys_role_menu` values (4, 1068);
insert into `sys_role_menu` values (4, 1069);
insert into `sys_role_menu` values (4, 1070);
insert into `sys_role_menu` values (4, 1071);
insert into `sys_role_menu` values (4, 1072);
insert into `sys_role_menu` values (4, 1073);
insert into `sys_role_menu` values (4, 1074);
insert into `sys_role_menu` values (4, 1075);
insert into `sys_role_menu` values (4, 1076);
insert into `sys_role_menu` values (4, 1077);
insert into `sys_role_menu` values (5, 6);
insert into `sys_role_menu` values (5, 9);
insert into `sys_role_menu` values (5, 127);
insert into `sys_role_menu` values (5, 128);
insert into `sys_role_menu` values (5, 129);
insert into `sys_role_menu` values (5, 130);
insert into `sys_role_menu` values (5, 1078);
insert into `sys_role_menu` values (5, 1079);
insert into `sys_role_menu` values (5, 1080);
insert into `sys_role_menu` values (5, 1081);
insert into `sys_role_menu` values (5, 1082);
insert into `sys_role_menu` values (5, 1083);
insert into `sys_role_menu` values (5, 1084);
insert into `sys_role_menu` values (5, 1085);
insert into `sys_role_menu` values (5, 1086);
insert into `sys_role_menu` values (5, 1087);
insert into `sys_role_menu` values (6, 15);
insert into `sys_role_menu` values (6, 145);
insert into `sys_role_menu` values (6, 146);
-- insert into `sys_role_menu` values (6, 147);
insert into `sys_role_menu` values (6, 1155);
insert into `sys_role_menu` values (6, 1159);
insert into `sys_role_menu` values (6, 1160);
insert into `sys_role_menu` values (6, 1164);
insert into `sys_role_menu` values (7, 4);
insert into `sys_role_menu` values (7, 5);
insert into `sys_role_menu` values (7, 6);
insert into `sys_role_menu` values (7, 7);
insert into `sys_role_menu` values (7, 8);
insert into `sys_role_menu` values (7, 9);
insert into `sys_role_menu` values (7, 10);
insert into `sys_role_menu` values (7, 11);
insert into `sys_role_menu` values (7, 12);
insert into `sys_role_menu` values (7, 13);
insert into `sys_role_menu` values (7, 14);
insert into `sys_role_menu` values (7, 15);
insert into `sys_role_menu` values (7, 16);
insert into `sys_role_menu` values (7, 118);
insert into `sys_role_menu` values (7, 119);
insert into `sys_role_menu` values (7, 120);
insert into `sys_role_menu` values (7, 121);
insert into `sys_role_menu` values (7, 122);
insert into `sys_role_menu` values (7, 123);
insert into `sys_role_menu` values (7, 124);
insert into `sys_role_menu` values (7, 125);
insert into `sys_role_menu` values (7, 126);
insert into `sys_role_menu` values (7, 127);
insert into `sys_role_menu` values (7, 128);
insert into `sys_role_menu` values (7, 129);
insert into `sys_role_menu` values (7, 130);
insert into `sys_role_menu` values (7, 131);
insert into `sys_role_menu` values (7, 132);
insert into `sys_role_menu` values (7, 133);
insert into `sys_role_menu` values (7, 134);
insert into `sys_role_menu` values (7, 135);
insert into `sys_role_menu` values (7, 136);
insert into `sys_role_menu` values (7, 137);
insert into `sys_role_menu` values (7, 138);
insert into `sys_role_menu` values (7, 139);
insert into `sys_role_menu` values (7, 140);
insert into `sys_role_menu` values (7, 141);
insert into `sys_role_menu` values (7, 142);
insert into `sys_role_menu` values (7, 143);
insert into `sys_role_menu` values (7, 144);
insert into `sys_role_menu` values (7, 145);
insert into `sys_role_menu` values (7, 146);
-- insert into `sys_role_menu` values (7, 147);
insert into `sys_role_menu` values (7, 148);
insert into `sys_role_menu` values (7, 149);
insert into `sys_role_menu` values (7, 150);
insert into `sys_role_menu` values (7, 151);
-- insert into `sys_role_menu` values (7, 152);
insert into `sys_role_menu` values (7, 1000);
insert into `sys_role_menu` values (7, 1001);
insert into `sys_role_menu` values (7, 1005);
insert into `sys_role_menu` values (7, 1063);
insert into `sys_role_menu` values (7, 1067);
insert into `sys_role_menu` values (7, 1068);
insert into `sys_role_menu` values (7, 1072);
insert into `sys_role_menu` values (7, 1073);
insert into `sys_role_menu` values (7, 1077);
insert into `sys_role_menu` values (7, 1078);
insert into `sys_role_menu` values (7, 1082);
insert into `sys_role_menu` values (7, 1083);
insert into `sys_role_menu` values (7, 1087);
insert into `sys_role_menu` values (7, 1088);
insert into `sys_role_menu` values (7, 1092);
insert into `sys_role_menu` values (7, 1093);
insert into `sys_role_menu` values (7, 1097);
insert into `sys_role_menu` values (7, 1098);
insert into `sys_role_menu` values (7, 1102);
insert into `sys_role_menu` values (7, 1103);
insert into `sys_role_menu` values (7, 1107);
insert into `sys_role_menu` values (7, 1108);
insert into `sys_role_menu` values (7, 1112);
insert into `sys_role_menu` values (7, 1114);
insert into `sys_role_menu` values (7, 1119);
insert into `sys_role_menu` values (7, 1120);
insert into `sys_role_menu` values (7, 1124);
insert into `sys_role_menu` values (7, 1125);
insert into `sys_role_menu` values (7, 1129);
insert into `sys_role_menu` values (7, 1130);
insert into `sys_role_menu` values (7, 1134);
insert into `sys_role_menu` values (7, 1145);
insert into `sys_role_menu` values (7, 1149);
insert into `sys_role_menu` values (7, 1150);
insert into `sys_role_menu` values (7, 1154);
insert into `sys_role_menu` values (7, 1155);
insert into `sys_role_menu` values (7, 1159);
insert into `sys_role_menu` values (7, 1160);
insert into `sys_role_menu` values (7, 1164);
insert into `sys_role_menu` values (7, 1165);
insert into `sys_role_menu` values (7, 1169);
insert into `sys_role_menu` values (7, 1170);
insert into `sys_role_menu` values (7, 1174);
insert into `sys_role_menu` values (7, 1175);
insert into `sys_role_menu` values (7, 1179);
insert into `sys_role_menu` values (7, 1180);
insert into `sys_role_menu` values (7, 1184);
insert into `sys_role_menu` values (7, 1185);
insert into `sys_role_menu` values (7, 1189);
insert into `sys_role_menu` values (8, 4);
insert into `sys_role_menu` values (8, 5);
insert into `sys_role_menu` values (8, 10);
insert into `sys_role_menu` values (8, 11);
insert into `sys_role_menu` values (8, 131);
insert into `sys_role_menu` values (8, 132);
insert into `sys_role_menu` values (8, 133);
insert into `sys_role_menu` values (8, 134);
insert into `sys_role_menu` values (8, 135);
insert into `sys_role_menu` values (8, 136);
insert into `sys_role_menu` values (8, 1088);
insert into `sys_role_menu` values (8, 1089);
insert into `sys_role_menu` values (8, 1090);
insert into `sys_role_menu` values (8, 1091);
insert into `sys_role_menu` values (8, 1092);
insert into `sys_role_menu` values (8, 1093);
insert into `sys_role_menu` values (8, 1094);
insert into `sys_role_menu` values (8, 1095);
insert into `sys_role_menu` values (8, 1096);
insert into `sys_role_menu` values (8, 1097);
insert into `sys_role_menu` values (8, 1098);
insert into `sys_role_menu` values (8, 1102);
insert into `sys_role_menu` values (8, 1103);
insert into `sys_role_menu` values (8, 1107);
insert into `sys_role_menu` values (8, 1108);
insert into `sys_role_menu` values (8, 1112);
insert into `sys_role_menu` values (9, 10);
insert into `sys_role_menu` values (9, 16);
insert into `sys_role_menu` values (9, 133);
insert into `sys_role_menu` values (9, 134);
insert into `sys_role_menu` values (9, 148);
insert into `sys_role_menu` values (9, 149);
insert into `sys_role_menu` values (9, 150);
insert into `sys_role_menu` values (9, 1098);
insert into `sys_role_menu` values (9, 1102);
insert into `sys_role_menu` values (9, 1103);
insert into `sys_role_menu` values (9, 1107);
insert into `sys_role_menu` values (9, 1165);
insert into `sys_role_menu` values (9, 1169);
insert into `sys_role_menu` values (9, 1170);
insert into `sys_role_menu` values (9, 1174);
insert into `sys_role_menu` values (9, 1175);
insert into `sys_role_menu` values (9, 1179);
insert into `sys_role_menu` values (10, 10);;
insert into `sys_role_menu` values (10, 133);
insert into `sys_role_menu` values (10, 134);
insert into `sys_role_menu` values (10, 14);
insert into `sys_role_menu` values (10, 138);
insert into `sys_role_menu` values (10, 143);
insert into `sys_role_menu` values (10, 144);
insert into `sys_role_menu` values (10, 1098);
insert into `sys_role_menu` values (10, 1102);
insert into `sys_role_menu` values (10, 1103);
insert into `sys_role_menu` values (10, 1107);
insert into `sys_role_menu` values (10, 1120);
insert into `sys_role_menu` values (10, 1121);
insert into `sys_role_menu` values (10, 1122);
insert into `sys_role_menu` values (10, 1123);
insert into `sys_role_menu` values (10, 1124);
insert into `sys_role_menu` values (10, 1145);
insert into `sys_role_menu` values (10, 1149);
insert into `sys_role_menu` values (10, 1150);
insert into `sys_role_menu` values (10, 1154);
insert into `sys_role_menu` values (11, 140);
insert into `sys_role_menu` values (11, 141);
insert into `sys_role_menu` values (11, 142);
insert into `sys_role_menu` values (11, 1130);
insert into `sys_role_menu` values (11, 1134);
insert into `sys_role_menu` values (11, 1135);
insert into `sys_role_menu` values (11, 1136);
insert into `sys_role_menu` values (11, 1137);
insert into `sys_role_menu` values (11, 1138);
insert into `sys_role_menu` values (11, 1139);
insert into `sys_role_menu` values (11, 1140);
insert into `sys_role_menu` values (11, 1144);
insert into `sys_role_menu` values (12, 1117);
insert into `sys_role_menu` values (13, 1114);

-- ----------------------------
-- 8、角色和部门关联表  角色1-N部门
-- ----------------------------
drop table if exists sys_role_dept;
create table sys_role_dept (
  role_id   bigint(20) not null comment '角色ID',
  dept_id   bigint(20) not null comment '部门ID',
  primary key(role_id, dept_id)
) engine=innodb comment = '角色和部门关联表';

-- ----------------------------
-- 初始化-角色和部门关联表数据
-- ----------------------------
insert into sys_role_dept values ('2', '100');
insert into sys_role_dept values ('2', '101');
insert into sys_role_dept values ('2', '102');
insert into sys_role_dept values ('2', '103');
insert into sys_role_dept values ('2', '104');
insert into sys_role_dept values ('2', '105');
insert into sys_role_dept values ('2', '106');
insert into sys_role_dept values ('2', '107');
insert into sys_role_dept values ('2', '108');
insert into sys_role_dept values ('2', '109');
insert into sys_role_dept values ('2', '110');
insert into sys_role_dept values ('2', '111');
insert into sys_role_dept values ('2', '112');
insert into sys_role_dept values ('2', '113');
insert into sys_role_dept values ('2', '114');
insert into sys_role_dept values ('2', '115');
insert into sys_role_dept values ('2', '116');
insert into sys_role_dept values ('2', '117');
insert into sys_role_dept values ('2', '118');
insert into sys_role_dept values ('2', '200');
insert into sys_role_dept values ('2', '201');
insert into sys_role_dept values ('2', '202');
insert into sys_role_dept values ('2', '203');
insert into sys_role_dept values ('2', '204');

-- ----------------------------
-- 9、用户与岗位关联表  用户1-N岗位
-- ----------------------------
drop table if exists sys_user_post;
create table sys_user_post
(
  user_id   bigint(20) not null comment '用户ID',
  post_id   bigint(20) not null comment '岗位ID',
  primary key (user_id, post_id)
) engine=innodb comment = '用户与岗位关联表';

-- ----------------------------
-- 初始化-用户与岗位关联表数据
-- ----------------------------
INSERT INTO `sys_user_post` VALUES (1, 30);
INSERT INTO `sys_user_post` VALUES (2, 1);
INSERT INTO `sys_user_post` VALUES (3, 3);
INSERT INTO `sys_user_post` VALUES (4, 4);
INSERT INTO `sys_user_post` VALUES (4, 5);
INSERT INTO `sys_user_post` VALUES (5, 3);
INSERT INTO `sys_user_post` VALUES (6, 7);
INSERT INTO `sys_user_post` VALUES (7, 2);
INSERT INTO `sys_user_post` VALUES (8, 10);
INSERT INTO `sys_user_post` VALUES (8, 11);
INSERT INTO `sys_user_post` VALUES (8, 15);
INSERT INTO `sys_user_post` VALUES (9, 12);
INSERT INTO `sys_user_post` VALUES (10, 9);
INSERT INTO `sys_user_post` VALUES (11, 9);
INSERT INTO `sys_user_post` VALUES (12, 9);
INSERT INTO `sys_user_post` VALUES (12, 33);
INSERT INTO `sys_user_post` VALUES (13, 9);
INSERT INTO `sys_user_post` VALUES (14, 13);
INSERT INTO `sys_user_post` VALUES (14, 15);
INSERT INTO `sys_user_post` VALUES (14, 17);
INSERT INTO `sys_user_post` VALUES (15, 6);
INSERT INTO `sys_user_post` VALUES (15, 13);
INSERT INTO `sys_user_post` VALUES (15, 15);
INSERT INTO `sys_user_post` VALUES (16, 25);
INSERT INTO `sys_user_post` VALUES (16, 31);
INSERT INTO `sys_user_post` VALUES (17, 25);
INSERT INTO `sys_user_post` VALUES (18, 27);
INSERT INTO `sys_user_post` VALUES (19, 27);
INSERT INTO `sys_user_post` VALUES (20, 16);
INSERT INTO `sys_user_post` VALUES (21, 16);
INSERT INTO `sys_user_post` VALUES (22, 24);
INSERT INTO `sys_user_post` VALUES (22, 25);
INSERT INTO `sys_user_post` VALUES (23, 25);
INSERT INTO `sys_user_post` VALUES (24, 25);
INSERT INTO `sys_user_post` VALUES (25, 27);
INSERT INTO `sys_user_post` VALUES (26, 26);
INSERT INTO `sys_user_post` VALUES (27, 27);
INSERT INTO `sys_user_post` VALUES (28, 16);
INSERT INTO `sys_user_post` VALUES (29, 28);
INSERT INTO `sys_user_post` VALUES (30, 29);
INSERT INTO `sys_user_post` VALUES (31, 28);
INSERT INTO `sys_user_post` VALUES (32, 15);
INSERT INTO `sys_user_post` VALUES (33, 16);
INSERT INTO `sys_user_post` VALUES (34, 30);
INSERT INTO `sys_user_post` VALUES (35, 30);
INSERT INTO `sys_user_post` VALUES (36, 30);
INSERT INTO `sys_user_post` VALUES (37, 30);
INSERT INTO `sys_user_post` VALUES (38, 30);
INSERT INTO `sys_user_post` VALUES (39, 15);
INSERT INTO `sys_user_post` VALUES (40, 30);
INSERT INTO `sys_user_post` VALUES (41, 30);
INSERT INTO `sys_user_post` VALUES (42, 30);
INSERT INTO `sys_user_post` VALUES (43, 30);
INSERT INTO `sys_user_post` VALUES (44, 30);
INSERT INTO `sys_user_post` VALUES (45, 30);
INSERT INTO `sys_user_post` VALUES (46, 14);
INSERT INTO `sys_user_post` VALUES (46, 15);
INSERT INTO `sys_user_post` VALUES (47, 8);
INSERT INTO `sys_user_post` VALUES (47, 14);
INSERT INTO `sys_user_post` VALUES (48, 8);
INSERT INTO `sys_user_post` VALUES (48, 14);
INSERT INTO `sys_user_post` VALUES (49, 14);
INSERT INTO `sys_user_post` VALUES (49, 34);
INSERT INTO `sys_user_post` VALUES (50, 18);
INSERT INTO `sys_user_post` VALUES (51, 18);
INSERT INTO `sys_user_post` VALUES (52, 30);
INSERT INTO `sys_user_post` VALUES (53, 30);
INSERT INTO `sys_user_post` VALUES (54, 30);
INSERT INTO `sys_user_post` VALUES (55, 30);
INSERT INTO `sys_user_post` VALUES (56, 30);
INSERT INTO `sys_user_post` VALUES (57, 25);
INSERT INTO `sys_user_post` VALUES (58, 23);
INSERT INTO `sys_user_post` VALUES (59, 15);
INSERT INTO `sys_user_post` VALUES (60, 16);
INSERT INTO `sys_user_post` VALUES (61, 16);
INSERT INTO `sys_user_post` VALUES (62, 30);
INSERT INTO `sys_user_post` VALUES (63, 30);
INSERT INTO `sys_user_post` VALUES (64, 30);
INSERT INTO `sys_user_post` VALUES (65, 30);
INSERT INTO `sys_user_post` VALUES (66, 30);
INSERT INTO `sys_user_post` VALUES (67, 30);
INSERT INTO `sys_user_post` VALUES (68, 30);
INSERT INTO `sys_user_post` VALUES (69, 30);
INSERT INTO `sys_user_post` VALUES (70, 30);
INSERT INTO `sys_user_post` VALUES (71, 30);
INSERT INTO `sys_user_post` VALUES (72, 30);
INSERT INTO `sys_user_post` VALUES (73, 30);
INSERT INTO `sys_user_post` VALUES (74, 30);
INSERT INTO `sys_user_post` VALUES (75, 30);
INSERT INTO `sys_user_post` VALUES (76, 30);
INSERT INTO `sys_user_post` VALUES (77, 30);
INSERT INTO `sys_user_post` VALUES (78, 30);
INSERT INTO `sys_user_post` VALUES (79, 30);
INSERT INTO `sys_user_post` VALUES (80, 30);
INSERT INTO `sys_user_post` VALUES (81, 30);
INSERT INTO `sys_user_post` VALUES (82, 30);
INSERT INTO `sys_user_post` VALUES (83, 15);
INSERT INTO `sys_user_post` VALUES (84, 16);
INSERT INTO `sys_user_post` VALUES (85, 30);
INSERT INTO `sys_user_post` VALUES (86, 30);
INSERT INTO `sys_user_post` VALUES (87, 30);
INSERT INTO `sys_user_post` VALUES (88, 30);
INSERT INTO `sys_user_post` VALUES (89, 30);
INSERT INTO `sys_user_post` VALUES (90, 30);
INSERT INTO `sys_user_post` VALUES (91, 30);
INSERT INTO `sys_user_post` VALUES (92, 30);
INSERT INTO `sys_user_post` VALUES (93, 30);
INSERT INTO `sys_user_post` VALUES (94, 30);
INSERT INTO `sys_user_post` VALUES (95, 30);
INSERT INTO `sys_user_post` VALUES (96, 30);
INSERT INTO `sys_user_post` VALUES (97, 30);
INSERT INTO `sys_user_post` VALUES (98, 30);
INSERT INTO `sys_user_post` VALUES (99, 30);
INSERT INTO `sys_user_post` VALUES (100, 30);
INSERT INTO `sys_user_post` VALUES (101, 15);
INSERT INTO `sys_user_post` VALUES (102, 16);
INSERT INTO `sys_user_post` VALUES (103, 30);
INSERT INTO `sys_user_post` VALUES (104, 30);
INSERT INTO `sys_user_post` VALUES (105, 30);
INSERT INTO `sys_user_post` VALUES (106, 30);
INSERT INTO `sys_user_post` VALUES (107, 30);
INSERT INTO `sys_user_post` VALUES (108, 30);
INSERT INTO `sys_user_post` VALUES (109, 30);
INSERT INTO `sys_user_post` VALUES (110, 30);
INSERT INTO `sys_user_post` VALUES (111, 30);
INSERT INTO `sys_user_post` VALUES (112, 30);
INSERT INTO `sys_user_post` VALUES (113, 30);
INSERT INTO `sys_user_post` VALUES (114, 30);
INSERT INTO `sys_user_post` VALUES (115, 30);
INSERT INTO `sys_user_post` VALUES (116, 16);
INSERT INTO `sys_user_post` VALUES (117, 30);
INSERT INTO `sys_user_post` VALUES (118, 30);
INSERT INTO `sys_user_post` VALUES (119, 30);
INSERT INTO `sys_user_post` VALUES (120, 21);
INSERT INTO `sys_user_post` VALUES (121, 21);
INSERT INTO `sys_user_post` VALUES (122, 22);
INSERT INTO `sys_user_post` VALUES (123, 30);
INSERT INTO `sys_user_post` VALUES (124, 30);
INSERT INTO `sys_user_post` VALUES (125, 30);
INSERT INTO `sys_user_post` VALUES (126, 30);
INSERT INTO `sys_user_post` VALUES (127, 30);
INSERT INTO `sys_user_post` VALUES (128, 30);
INSERT INTO `sys_user_post` VALUES (129, 31);
INSERT INTO `sys_user_post` VALUES (130, 31);
INSERT INTO `sys_user_post` VALUES (131, 31);
INSERT INTO `sys_user_post` VALUES (132, 31);
INSERT INTO `sys_user_post` VALUES (133, 31);
INSERT INTO `sys_user_post` VALUES (134, 31);
INSERT INTO `sys_user_post` VALUES (135, 31);
INSERT INTO `sys_user_post` VALUES (136, 31);
INSERT INTO `sys_user_post` VALUES (137, 31);
INSERT INTO `sys_user_post` VALUES (138, 19);
INSERT INTO `sys_user_post` VALUES (139, 30);
INSERT INTO `sys_user_post` VALUES (140, 30);
INSERT INTO `sys_user_post` VALUES (141, 27);
INSERT INTO `sys_user_post` VALUES (142, 33);
INSERT INTO `sys_user_post` VALUES (143, 30);
INSERT INTO `sys_user_post` VALUES (144, 30);
INSERT INTO `sys_user_post` VALUES (145, 30);
INSERT INTO `sys_user_post` VALUES (146, 30);
INSERT INTO `sys_user_post` VALUES (147, 31);
INSERT INTO `sys_user_post` VALUES (148, 25);
INSERT INTO `sys_user_post` VALUES (149, 30);
INSERT INTO `sys_user_post` VALUES (150, 30);

-- ----------------------------
-- 10、操作日志记录
-- ----------------------------
drop table if exists sys_oper_log;
create table sys_oper_log (
  oper_id           bigint(20)      not null auto_increment    comment '日志主键',
  title             varchar(50)     default ''                 comment '模块标题',
  business_type     int(2)          default 0                  comment '业务类型（0其它 1新增 2修改 3删除）',
  method            varchar(100)    default ''                 comment '方法名称',
  request_method    varchar(10)     default ''                 comment '请求方式',
  operator_type     int(1)          default 0                  comment '操作类别（0其它 1后台用户 2手机端用户）',
  oper_name         varchar(50)     default ''                 comment '操作人员',
  dept_name         varchar(50)     default ''                 comment '部门名称',
  oper_url          varchar(255)    default ''                 comment '请求URL',
  oper_ip           varchar(128)    default ''                 comment '主机地址',
  oper_location     varchar(255)    default ''                 comment '操作地点',
  oper_param        varchar(2000)   default ''                 comment '请求参数',
  json_result       varchar(2000)   default ''                 comment '返回参数',
  status            int(1)          default 0                  comment '操作状态（0正常 1异常）',
  error_msg         varchar(2000)   default ''                 comment '错误消息',
  oper_time         datetime                                   comment '操作时间',
  cost_time         bigint(20)      default 0                  comment '消耗时间',
  primary key (oper_id),
  key idx_sys_oper_log_bt (business_type),
  key idx_sys_oper_log_s  (status),
  key idx_sys_oper_log_ot (oper_time)
) engine=innodb auto_increment=100 comment = '操作日志记录';


-- ----------------------------
-- 11、字典类型表
-- ----------------------------
drop table if exists sys_dict_type;
create table sys_dict_type
(
  dict_id          bigint(20)      not null auto_increment    comment '字典主键',
  dict_name        varchar(100)    default ''                 comment '字典名称',
  dict_type        varchar(100)    default ''                 comment '字典类型',
  status           char(1)         default '0'                comment '状态（0正常 1停用）',
  create_by        varchar(64)     default ''                 comment '创建者',
  create_time      datetime                                   comment '创建时间',
  update_by        varchar(64)     default ''                 comment '更新者',
  update_time      datetime                                   comment '更新时间',
  remark           varchar(500)    default null               comment '备注',
  primary key (dict_id),
  unique (dict_type)
) engine=innodb auto_increment=100 comment = '字典类型表';

insert into sys_dict_type values(1,  '用户性别', 'sys_user_sex',        '0', 'admin', sysdate(), '', null, '用户性别列表');
insert into sys_dict_type values(2,  '菜单状态', 'sys_show_hide',       '0', 'admin', sysdate(), '', null, '菜单状态列表');
insert into sys_dict_type values(3,  '系统开关', 'sys_normal_disable',  '0', 'admin', sysdate(), '', null, '系统开关列表');
insert into sys_dict_type values(4,  '任务状态', 'sys_job_status',      '0', 'admin', sysdate(), '', null, '任务状态列表');
insert into sys_dict_type values(5,  '任务分组', 'sys_job_group',       '0', 'admin', sysdate(), '', null, '任务分组列表');
insert into sys_dict_type values(6,  '系统是否', 'sys_yes_no',          '0', 'admin', sysdate(), '', null, '系统是否列表');
insert into sys_dict_type values(7,  '通知类型', 'sys_notice_type',     '0', 'admin', sysdate(), '', null, '通知类型列表');
insert into sys_dict_type values(8,  '通知状态', 'sys_notice_status',   '0', 'admin', sysdate(), '', null, '通知状态列表');
insert into sys_dict_type values(9,  '操作类型', 'sys_oper_type',       '0', 'admin', sysdate(), '', null, '操作类型列表');
insert into sys_dict_type values(10, '系统状态', 'sys_common_status',   '0', 'admin', sysdate(), '', null, '登录状态列表');
insert into sys_dict_type values (11, '项目经理级别', 'sys_user_pmlevel', '0', 'admin', '2024-01-08 15:42:02', '', null, null);
insert into sys_dict_type values (12, '工程师岗级', 'sys_user_engineerlevel', '0', 'admin', '2024-01-08 15:43:30', '', null, null);
insert into sys_dict_type values (13, '岗级', 'sys_user_postlevel', '0', 'admin', '2024-01-08 15:43:30', '', null, null);
insert into sys_dict_type values (14, '薪档', 'sys_user_salarylevel', '0', 'admin', '2024-01-08 15:43:30', '', null, null);
insert into sys_dict_type values (15, '技术职称', 'sys_user_titles', '0', 'admin', '2024-01-08 15:47:47', '', null, null);
insert into sys_dict_type values (16, '学历', 'sys_user_degree', '0', 'admin', '2022-10-14 11:16:12', '', NULL, NULL);
insert into sys_dict_type values (17, '政治面貌', 'sys_user_political', '0', 'admin', '2022-10-14 11:16:12', '', NULL, NULL);
insert into sys_dict_type values (18, '技工等级', 'sys_user_operatorlevel', '0', 'admin', '2022-10-14 11:16:12', '', NULL, NULL);
insert into sys_dict_type values (19, '执业证书', 'sys_user_certificates', '0', 'admin', '2024-01-08 15:47:47', '', null, null);
insert into sys_dict_type values (20, '考核等级', 'cmc_accessment', '0', 'admin', '2024-01-08 15:58:22', '', NULL, NULL);
insert into sys_dict_type values (21, '技能掌握', 'cmc_skill', '0', 'admin', '2024-01-08 16:07:43', '', NULL, NULL);
insert into sys_dict_type values (22, '工作量', 'cmc_workload', '0', 'admin', '2024-01-08 16:08:51', '', NULL, NULL);
insert into sys_dict_type values (23, '承担角色', 'cmc_role', '0', 'admin', '2024-01-08 16:10:07', '', NULL, NULL);
insert into sys_dict_type values (24, '航飞机型', 'cmc_uav', '0', 'admin', '2024-01-12 15:34:18', '', NULL, NULL);
insert into sys_dict_type values (25, '成果类型', 'cmc_achi_type', '0', 'admin', '2022-10-14 11:16:00', '', NULL, NULL);
insert into sys_dict_type values (26, '比例尺或等级', 'cmc_scale_grade', '0', 'admin', '2022-10-14 11:16:12', '', NULL, NULL);
insert into sys_dict_type values (27, '员工状态', 'sys_post_status', '0', 'admin', '2022-10-14 11:16:12', '', NULL, NULL);
insert into sys_dict_type values (28, '单位', 'cmc_unit', '0', 'admin', '2022-10-14 11:16:12', '', NULL, NULL);

-- ----------------------------
-- 12、字典数据表
-- ----------------------------
drop table if exists sys_dict_data;
create table sys_dict_data
(
  dict_code        bigint(20)      not null auto_increment    comment '字典编码',
  dict_sort        int(4)          default 0                  comment '字典排序',
  dict_label       varchar(100)    default ''                 comment '字典标签',
  dict_value       varchar(100)    default ''                 comment '字典键值',
  dict_type        varchar(100)    default ''                 comment '字典类型',
  css_class        varchar(100)    default null               comment '样式属性（其他样式扩展）',
  list_class       varchar(100)    default null               comment '表格回显样式',
  is_default       char(1)         default 'N'                comment '是否默认（Y是 N否）',
  status           char(1)         default '0'                comment '状态（0正常 1停用）',
  create_by        varchar(64)     default ''                 comment '创建者',
  create_time      datetime                                   comment '创建时间',
  update_by        varchar(64)     default ''                 comment '更新者',
  update_time      datetime                                   comment '更新时间',
  remark           varchar(500)    default null               comment '备注',
  primary key (dict_code)
) engine=innodb auto_increment=100 comment = '字典数据表';

insert into sys_dict_data values (1, 1, '男', '0', 'sys_user_sex', '', '', 'Y', '0', 'admin', '2022-12-11 16:51:52', '', null, '性别男');
insert into sys_dict_data values (2, 2, '女', '1', 'sys_user_sex', '', '', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '性别女');
insert into sys_dict_data values (3, 1, '显示', '0', 'sys_show_hide', '', 'primary', 'Y', '0', 'admin', '2022-12-11 16:51:52', '', null, '显示菜单');
insert into sys_dict_data values (4, 2, '隐藏', '1', 'sys_show_hide', '', 'danger', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '隐藏菜单');
insert into sys_dict_data values (5, 1, '正常', '0', 'sys_normal_disable', '', 'primary', 'Y', '0', 'admin', '2022-12-11 16:51:52', '', null, '正常状态');
insert into sys_dict_data values (6, 2, '停用', '1', 'sys_normal_disable', '', 'danger', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '停用状态');
insert into sys_dict_data values (7, 0, '在职', '0', 'sys_post_status', '', 'primary', 'Y', '0', 'admin', '2022-12-11 16:51:52', '', null, '在职状态');
insert into sys_dict_data values (8, 1, '离职', '1', 'sys_post_status', '', 'danger', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '离职状态');
insert into sys_dict_data values (9, 2, '退休', '2', 'sys_post_status', '', 'warning', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '退休状态');
insert into sys_dict_data values (10, 1, '正常', '0', 'sys_job_status', '', 'primary', 'Y', '0', 'admin', '2022-12-11 16:51:52', '', null, '正常状态');
insert into sys_dict_data values (11, 2, '暂停', '1', 'sys_job_status', '', 'danger', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '停用状态');
insert into sys_dict_data values (12, 1, '默认', 'DEFAULT', 'sys_job_group', '', '', 'Y', '0', 'admin', '2022-12-11 16:51:52', '', null, '默认分组');
insert into sys_dict_data values (13, 2, '系统', 'SYSTEM', 'sys_job_group', '', '', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '系统分组');
insert into sys_dict_data values (14, 1, '是', 'Y', 'sys_yes_no', '', 'primary', 'Y', '0', 'admin', '2022-12-11 16:51:52', '', null, '系统默认是');
insert into sys_dict_data values (15, 2, '否', 'N', 'sys_yes_no', '', 'danger', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '系统默认否');
insert into sys_dict_data values (16, 1, '通知', '1', 'sys_notice_type', '', 'warning', 'Y', '0', 'admin', '2022-12-11 16:51:52', '', null, '通知');
insert into sys_dict_data values (17, 2, '公示', '2', 'sys_notice_type', '', 'success', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '公示');
insert into sys_dict_data values (18, 1, '正常', '0', 'sys_notice_status', '', 'primary', 'Y', '0', 'admin', '2022-12-11 16:51:52', '', null, '正常状态');
insert into sys_dict_data values (19, 2, '关闭', '1', 'sys_notice_status', '', 'danger', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '关闭状态');
insert into sys_dict_data values (20, 99, '其他', '0', 'sys_oper_type', '', 'info', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '其他操作');
insert into sys_dict_data values (21, 1, '新增', '1', 'sys_oper_type', '', 'info', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '新增操作');
insert into sys_dict_data values (22, 2, '修改', '2', 'sys_oper_type', '', 'info', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '修改操作');
insert into sys_dict_data values (23, 3, '删除', '3', 'sys_oper_type', '', 'danger', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '删除操作');
insert into sys_dict_data values (24, 4, '授权', '4', 'sys_oper_type', '', 'primary', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '授权操作');
insert into sys_dict_data values (25, 5, '导出', '5', 'sys_oper_type', '', 'warning', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '导出操作');
insert into sys_dict_data values (26, 6, '导入', '6', 'sys_oper_type', '', 'warning', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '导入操作');
insert into sys_dict_data values (27, 7, '强退', '7', 'sys_oper_type', '', 'danger', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '强退操作');
insert into sys_dict_data values (28, 8, '生成代码', '8', 'sys_oper_type', '', 'warning', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '生成操作');
insert into sys_dict_data values (29, 9, '清空数据', '9', 'sys_oper_type', '', 'danger', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '清空操作');
insert into sys_dict_data values (30, 1, '成功', '0', 'sys_common_status', '', 'primary', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '正常状态');
insert into sys_dict_data values (31, 2, '失败', '1', 'sys_common_status', '', 'danger', 'N', '0', 'admin', '2022-12-11 16:51:52', '', null, '停用状态');
insert into sys_dict_data values (32, 0, '一级', '0', 'sys_user_pmlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:42:30', '', null, null);
insert into sys_dict_data values (33, 1, '二级', '1', 'sys_user_pmlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:42:42', '', null, null);
insert into sys_dict_data values (34, 2, '三级', '2', 'sys_user_pmlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:42:57', '', null, null);
insert into sys_dict_data values (35, 0, '一级', '0', 'sys_user_engineerlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:45:14', '', null, null);
insert into sys_dict_data values (36, 1, '二级', '1', 'sys_user_engineerlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:45:24', '', null, null);
insert into sys_dict_data values (37, 2, '三级', '2', 'sys_user_engineerlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:45:37', '', null, null);
insert into sys_dict_data values (38, 3, '四级', '3', 'sys_user_engineerlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:46:02', '', null, null);
insert into sys_dict_data values (39, 4, '五级', '4', 'sys_user_engineerlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:46:24', '', null, null);
insert into sys_dict_data values (40, 5, '六级', '5', 'sys_user_engineerlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:46:35', '', null, null);
insert into sys_dict_data values (41, 0, '一岗', '0', 'sys_user_postlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:46:44', '', null, null);
insert into sys_dict_data values (42, 1, '二岗', '1', 'sys_user_postlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:47:24', '', null, null);
insert into sys_dict_data values (43, 2, '三岗', '2', 'sys_user_postlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:47:24', '', null, null);
insert into sys_dict_data values (44, 3, '四岗', '3', 'sys_user_postlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:47:24', '', null, null);
insert into sys_dict_data values (45, 4, '五岗', '4', 'sys_user_postlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:47:24', '', null, null);
insert into sys_dict_data values (46, 5, '六岗', '5', 'sys_user_postlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:47:24', '', null, null);
insert into sys_dict_data values (47, 6, '七岗', '6', 'sys_user_postlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:47:24', '', null, null);
insert into sys_dict_data values (48, 7, '八岗', '7', 'sys_user_postlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:47:24', '', null, null);
insert into sys_dict_data values (49, 0, '一级', '0', 'sys_user_salarylevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:46:44', '', null, null);
insert into sys_dict_data values (50, 1, '二级', '1', 'sys_user_salarylevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:47:24', '', null, null);
insert into sys_dict_data values (51, 2, '三级', '2', 'sys_user_salarylevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:47:24', '', null, null);
insert into sys_dict_data values (52, 3, '四级', '3', 'sys_user_salarylevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:47:24', '', null, null);
insert into sys_dict_data values (53, 4, '五级', '4', 'sys_user_salarylevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:47:24', '', null, null);
insert into sys_dict_data values (54, 5, '六级', '5', 'sys_user_salarylevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:47:24', '', null, null);
insert into sys_dict_data values (55, 6, '七级', '6', 'sys_user_salarylevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:47:24', '', null, null);
insert into sys_dict_data values (56, 7, '八级', '7', 'sys_user_salarylevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:47:24', '', null, null);
insert into sys_dict_data values (57, 0, '正高级工程师', '0', 'sys_user_titles', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:08', '', null, null);
insert into sys_dict_data values (58, 1, '高级工程师', '1', 'sys_user_titles', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:45', '', null, null);
insert into sys_dict_data values (59, 2, '工程师', '2', 'sys_user_titles', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:57', '', null, null);
insert into sys_dict_data values (60, 3, '助理工程师', '3', 'sys_user_titles', null, 'default', 'N', '0', 'admin', '2024-01-08 15:49:07', '', null, null);
insert into sys_dict_data values (61, 4, '高级会计师', '4', 'sys_user_titles', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:08', '', null, null);
insert into sys_dict_data values (62, 5, '会计师', '5', 'sys_user_titles', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:45', '', null, null);
insert into sys_dict_data values (63, 6, '助理会计师', '6', 'sys_user_titles', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:57', '', null, null);
insert into sys_dict_data values (64, 7, '高级经济师', '7', 'sys_user_titles', null, 'default', 'N', '0', 'admin', '2024-01-08 15:49:07', '', null, null);
insert into sys_dict_data values (65, 8, '经济师', '8', 'sys_user_titles', null, 'default', 'N', '0', 'admin', '2024-01-08 15:49:07', '', null, null);
insert into sys_dict_data values (66, 9, '助理经济师', '9', 'sys_user_titles', null, 'default', 'N', '0', 'admin', '2024-01-08 15:49:07', '', null, null);
insert into sys_dict_data values (67, 10, '工人高级工', '10', 'sys_user_titles', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:08', '', null, null);
insert into sys_dict_data values (68, 11, '工人中级工', '11', 'sys_user_titles', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:08', '', null, null);
insert into sys_dict_data values (69, 12, '工人初级工', '12', 'sys_user_titles', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:08', '', null, null);
insert into sys_dict_data values (70, 13, '无职称', '13', 'sys_user_titles', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:45', '', null, null);
insert into sys_dict_data values (71, 0, '博士', '0', 'sys_user_degree', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:08', '', null, null);
insert into sys_dict_data values (72, 1, '硕士', '1', 'sys_user_degree', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:45', '', null, null);
insert into sys_dict_data values (73, 2, '本科', '2', 'sys_user_degree', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:57', '', null, null);
insert into sys_dict_data values (74, 3, '专科', '3', 'sys_user_degree', null, 'default', 'N', '0', 'admin', '2024-01-08 15:49:07', '', null, null);
insert into sys_dict_data values (75, 5, '高中', '4', 'sys_user_degree', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:08', '', null, null);
insert into sys_dict_data values (76, 5, '中专', '5', 'sys_user_degree', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:08', '', null, null);
insert into sys_dict_data values (77, 6, '初中', '6', 'sys_user_degree', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:45', '', null, null);
insert into sys_dict_data values (78, 0, '党总支书记', '0', 'sys_user_political', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:57', '', null, null);
insert into sys_dict_data values (79, 1, '党总支干事', '1', 'sys_user_political', null, 'default', 'N', '0', 'admin', '2024-01-08 15:49:07', '', null, null);
insert into sys_dict_data values (80, 2, '党总支委员', '2', 'sys_user_political', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:57', '', null, null);
insert into sys_dict_data values (81, 3, '第一党支部书记', '3', 'sys_user_political', null, 'default', 'N', '0', 'admin', '2024-01-08 15:49:07', '', null, null);
insert into sys_dict_data values (82, 4, '第二党支部书记', '4', 'sys_user_political', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:57', '', null, null);
insert into sys_dict_data values (83, 5, '第一党支部组织委员', '5', 'sys_user_political', null, 'default', 'N', '0', 'admin', '2024-01-08 15:49:07', '', null, null);
insert into sys_dict_data values (84, 6, '第二党支部组织委员', '6', 'sys_user_political', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:57', '', null, null);
insert into sys_dict_data values (85, 7, '第一党支部宣传委员', '7', 'sys_user_political', null, 'default', 'N', '0', 'admin', '2024-01-08 15:49:07', '', null, null);
insert into sys_dict_data values (86, 8, '第二党支部宣传委员', '8', 'sys_user_political', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:57', '', null, null);
insert into sys_dict_data values (87, 9, '第一党支部党员', '9', 'sys_user_political', null, 'default', 'N', '0', 'admin', '2024-01-08 15:49:07', '', null, null);
insert into sys_dict_data values (88, 10, '第二党支部党员', '10', 'sys_user_political', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:57', '', null, null);
insert into sys_dict_data values (89, 11, '预备党员', '11', 'sys_user_political', null, 'default', 'N', '0', 'admin', '2024-01-08 15:49:07', '', null, null);
insert into sys_dict_data values (90, 12, '共青团员', '12', 'sys_user_political', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:57', '', null, null);
insert into sys_dict_data values (91, 13, '群众', '13', 'sys_user_political', null, 'default', 'N', '0', 'admin', '2024-01-08 15:49:07', '', null, null);
insert into sys_dict_data values (92, 0, '一级', '0', 'sys_user_operatorlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:49:07', '', null, null);
insert into sys_dict_data values (93, 1, '二级', '1', 'sys_user_operatorlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:48:57', '', null, null);
insert into sys_dict_data values (94, 2, '三级', '2', 'sys_user_operatorlevel', null, 'default', 'N', '0', 'admin', '2024-01-08 15:49:07', '', null, null);
insert into sys_dict_data values (95, 0, '注册测绘师', '0', 'sys_user_certificates', null, 'default', 'N', '0', 'admin', '2024-01-08 15:49:30', '', null, null);
insert into sys_dict_data values (96, 1, '注册城乡规划师', '1', 'sys_user_certificates', null, 'default', 'N', '0', 'admin', '2024-01-08 15:50:11', '', null, null);
insert into sys_dict_data values (97, 2, '注册岩土工程师', '2', 'sys_user_certificates', null, 'default', 'N', '0', 'admin', '2024-01-08 15:50:58', '', null, null);
insert into sys_dict_data values (98, 3, '注册安全工程师', '3', 'sys_user_certificates', null, 'default', 'N', '0', 'admin', '2024-01-08 15:51:13', '', null, null);
insert into sys_dict_data values (99, 4, '注册会计师', '4', 'sys_user_certificates', null, 'default', 'N', '0', 'admin', '2024-01-08 15:51:36', '', null, null);
insert into sys_dict_data values (100, 0, '不合格', '0', 'cmc_accessment', null, 'default', 'N', '0', 'admin', '2024-01-08 15:58:47', '', null, null);
insert into sys_dict_data values (101, 1, '合格', '1', 'cmc_accessment', null, 'default', 'N', '0', 'admin', '2024-01-08 15:58:56', '', null, null);
insert into sys_dict_data values (102, 2, '良好', '2', 'cmc_accessment', null, 'default', 'N', '0', 'admin', '2024-01-08 15:59:08', '', null, null);
insert into sys_dict_data values (103, 3, '优秀', '3', 'cmc_accessment', null, 'default', 'N', '0', 'admin', '2024-01-08 15:59:23', '', null, null);
insert into sys_dict_data values (104, 0, '生疏', '0', 'cmc_skill', null, 'default', 'N', '0', 'admin', '2024-01-08 16:08:12', '', null, null);
insert into sys_dict_data values (105, 1, '较熟练', '1', 'cmc_skill', null, 'default', 'N', '0', 'admin', '2024-01-08 16:08:20', '', null, null);
insert into sys_dict_data values (106, 2, '熟练', '2', 'cmc_skill', null, 'default', 'N', '0', 'admin', '2024-01-08 16:08:28', '', null, null);
insert into sys_dict_data values (107, 3, '精通', '3', 'cmc_skill', null, 'default', 'N', '0', 'admin', '2024-01-08 16:09:06', '', null, null);
insert into sys_dict_data values (108, 0, '较少', '0', 'cmc_workload', null, 'default', 'N', '0', 'admin', '2024-01-08 16:09:14', '', null, null);
insert into sys_dict_data values (109, 1, '正常', '1', 'cmc_workload', null, 'default', 'N', '0', 'admin', '2024-01-08 16:09:22', '', null, null);
insert into sys_dict_data values (110, 2, '较多', '2', 'cmc_workload', null, 'default', 'N', '0', 'admin', '2024-01-08 16:09:30', '', null, null);
insert into sys_dict_data values (111, 0, '主办', '00', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-08 16:11:04', '', null, null);
insert into sys_dict_data values (112, 1, '参与', '01', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-08 16:11:15', '', null, null);
insert into sys_dict_data values (113, 2, '协办', '02', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-08 16:11:39', '', null, null);
insert into sys_dict_data values (114, 3, '常规项目', '03', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:15:45', '', null, null);
insert into sys_dict_data values (115, 4, '监测项目', '04', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:16:47', '', null, null);
insert into sys_dict_data values (116, 5, '调查项目', '05', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:19:17', '', null, null);
insert into sys_dict_data values (117, 6, '测量项目', '06', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:20:20', '', null, null);
insert into sys_dict_data values (118, 7, '其他项目', '07', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:20:32', '', null, null);
insert into sys_dict_data values (119, 8, '选点', '08', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:23:11', '', null, null);
insert into sys_dict_data values (120, 9, '埋石', '09', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:23:28', '', null, null);
insert into sys_dict_data values (121, 10, '观测', '10', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:23:44', '', null, null);
insert into sys_dict_data values (122, 11, '计算', '11', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:24:21', '', null, null);
insert into sys_dict_data values (123, 12, '检查', '12', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:24:33', '', null, null);
insert into sys_dict_data values (124, 13, '负责', '13', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:24:41', '', null, null);
insert into sys_dict_data values (125, 14, '前视', '14', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:48:05', '', null, null);
insert into sys_dict_data values (126, 15, '后视', '15', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:48:14', '', null, null);
insert into sys_dict_data values (127, 16, '水准', '16', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:48:38', '', null, null);
insert into sys_dict_data values (128, 17, '三角高程', '17', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:48:52', '', null, null);
insert into sys_dict_data values (129, 18, '实测', '18', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:49:09', '', null, null);
insert into sys_dict_data values (130, 19, '相控', '19', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 09:49:29', '', null, null);
insert into sys_dict_data values (131, 20, '调绘', '20', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 10:31:53', '', null, null);
insert into sys_dict_data values (132, 21, '测量', '21', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 10:32:57', '', null, null);
insert into sys_dict_data values (133, 22, '整理', '22', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 10:33:08', '', null, null);
insert into sys_dict_data values (134, 23, '主飞', '23', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 10:35:22', '', null, null);
insert into sys_dict_data values (135, 24, '协飞', '24', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 10:35:48', '', null, null);
insert into sys_dict_data values (136, 25, '作业', '25', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 10:43:01', '', null, null);
insert into sys_dict_data values (137, 26, '检查', '26', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 10:44:59', '', null, null);
insert into sys_dict_data values (138, 27, '负责', '27', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 10:45:12', '', null, null);
insert into sys_dict_data values (139, 28, '空三', '28', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 10:46:14', '', null, null);
insert into sys_dict_data values (140, 29, '建模', '29', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 10:46:42', '', null, null);
insert into sys_dict_data values (141, 30, '修模', '30', 'cmc_role', null, 'default', 'N', '0', 'admin', '2024-01-09 10:46:55', '', null, null);
insert into sys_dict_data values (142, 0, '傲视', '0', 'cmc_uav', null, 'default', 'N', '0', 'admin', '2024-01-12 15:35:35', '', null, null);
insert into sys_dict_data values (143, 1, '飞马', '1', 'cmc_uav', null, 'default', 'N', '0', 'admin', '2024-01-12 15:35:46', '', null, null);
insert into sys_dict_data values (144, 2, '华测', '2', 'cmc_uav', null, 'default', 'N', '0', 'admin', '2024-01-12 15:35:56', '', null, null);
insert into sys_dict_data values (145, 3, '其他', '3', 'cmc_uav', null, 'default', 'N', '0', 'admin', '2024-01-12 15:36:03', '', null, null);
insert into sys_dict_data values (203, 3, '经营流程', 'business', 'sys_process_category', null, 'default', 'N', '0', 'admin', '2024-01-23 10:59:48', '', null, null);
insert into sys_dict_data values (204, 4, '生产流程', 'project', 'sys_process_category', null, 'default', 'N', '0', 'admin', '2024-01-23 10:59:48', '', null, null);
insert into sys_dict_data values (205, 5, '考核流程', 'assess', 'sys_process_category', null, 'default', 'N', '0', 'admin', '2024-01-23 11:02:55', '', null, null);
insert into sys_dict_data values (206, 6, '财务流程', 'finance', 'sys_process_category', null, 'default', 'N', '0', 'admin', '2024-01-23 11:02:55', '', null, null);
insert into sys_dict_data values (400, 0, 'DEM', '0', 'cmc_achi_type', null, 'default', 'N', '0', 'admin', '2022-10-14 11:16:35', '', null, null);
insert into sys_dict_data values (401, 1, 'DOM', '1', 'cmc_achi_type', null, 'default', 'N', '0', 'admin', '2022-10-14 11:16:42', 'admin', '2022-10-14 11:17:01', null);
insert into sys_dict_data values (402, 2, '地形图', '2', 'cmc_achi_type', null, 'default', 'N', '0', 'admin', '2022-10-14 11:16:57', '', null, null);
insert into sys_dict_data values (403, 3, '三维模型', '3', 'cmc_achi_type', null, 'default', 'N', '0', 'admin', '2022-10-14 11:17:11', '', null, null);
insert into sys_dict_data values (404, 4, '三维地形面', '4', 'cmc_achi_type', null, 'default', 'N', '0', 'admin', '2022-10-14 11:17:11', '', null, null);
insert into sys_dict_data values (405, 5, '地形地类图', '5', 'cmc_achi_type', null, 'default', 'N', '0', 'admin', '2022-10-14 11:17:23', 'admin', '2022-10-14 11:17:28', null);
insert into sys_dict_data values (406, 6, '电子沙盘', '6', 'cmc_achi_type', null, 'default', 'N', '0', 'admin', '2022-10-14 11:17:43', '', null, null);
insert into sys_dict_data values (407, 7, '点云', '7', 'cmc_achi_type', null, 'default', 'N', '0', 'admin', '2022-10-14 11:18:51', '', null, null);
insert into sys_dict_data values (408, 8, '报告', '8', 'cmc_achi_type', null, 'default', 'N', '0', 'admin', '2023-04-18 09:10:27', '', null, null);
insert into sys_dict_data values (409, 9, '无人机航飞', '9', 'cmc_achi_type', null, 'default', 'N', '0', 'admin', '2023-04-18 09:10:38', '', null, null);
insert into sys_dict_data values (410, 10, 'pdf', '10', 'cmc_achi_type', null, 'default', 'N', '0', '13880738350', '2023-04-19 16:57:43', '', null, null);
insert into sys_dict_data values (411, 11, '原始数据', '11', 'cmc_achi_type', null, 'default', 'N', '0', '13880738350', '2023-04-20 15:57:24', '', null, null);
insert into sys_dict_data values (412, 12, '图片', '12', 'cmc_achi_type', null, 'default', 'N', '0', '13880738350', '2023-04-20 15:57:24', '', null, null);
insert into sys_dict_data values (413, 13, '坐标转换', '13', 'cmc_achi_type', null, 'default', 'N', '0', '13880738350', '2023-04-20 15:57:24', '', null, null);
insert into sys_dict_data values (414, 14, '断面', '14', 'cmc_achi_type', null, 'default', 'N', '0', '13880738350', '2023-04-20 15:57:24', '', null, null);
insert into sys_dict_data values (415, 15, '视频', '15', 'cmc_achi_type', null, 'default', 'N', '0', '13880738350', '2023-04-20 15:57:24', '', null, null);
insert into sys_dict_data values (416, 16, '其他', '16', 'cmc_achi_type', null, 'default', 'N', '0', 'admin', '2023-04-18 09:12:12', '', null, null);
insert into sys_dict_data values (500, 0, '1:200', '0', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:19:30', '', null, null);
insert into sys_dict_data values (501, 1, '1:500', '1', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:19:37', '', null, null);
insert into sys_dict_data values (502, 2, '1:1000', '2', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:19:46', '', null, null);
insert into sys_dict_data values (503, 3, '1:2000', '3', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:19:56', '', null, null);
insert into sys_dict_data values (504, 4, '1:5000', '4', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:07', '', null, null);
insert into sys_dict_data values (505, 5, '1:10000', '5', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:14', '', null, null);
insert into sys_dict_data values (506, 6, '一等', '6', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:19:30', '', null, null);
insert into sys_dict_data values (507, 7, '二等', '7', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:19:37', '', null, null);
insert into sys_dict_data values (508, 8, '三等', '8', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:19:46', '', null, null);
insert into sys_dict_data values (509, 9, '四等', '9', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:19:56', '', null, null);
insert into sys_dict_data values (510, 10, '五等', '10', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:07', '', null, null);
insert into sys_dict_data values (511, 11, '三、四等', '11', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (512, 12, '四、五等', '12', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (513, 13, '地形点', '13', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (514, 14, '断面基点', '14', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (515, 15, 'GSD ≤2.9cm', '15', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (516, 16, 'GSD 3cm～4.9cm', '16', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (517, 17, 'GSD 5cm～9.9cm', '17', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (518, 18, 'GSD 10cm～20cm', '18', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (519, 19, 'A级', '19', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (520, 20, 'B级', '20', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (521, 21, 'C级', '21', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (522, 22, 'D级', '22', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (523, 23, 'E级', '23', 'cmc_scale_grade', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (600, 0, 'km', '0', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (601, 1, 'km²', '1', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (602, 2, 'm', '2', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (603, 3, 'm²', '3', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (604, 4, 'm³', '4', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (605, 5, '亩', '5', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (606, 6, '点', '6', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (607, 7, '处', '7', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (608, 8, '幅', '8', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (609, 9, '条', '9', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (610, 10, '人天', '10', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (611, 11, '项', '11', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (612, 12, '套', '12', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (613, 13, '组', '13', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (614, 14, '站', '14', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (615, 15, '段', '15', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (616, 16, '件', '16', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (617, 17, '次', '17', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (618, 18, '年', '18', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (619, 19, '秒', '19', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);
insert into sys_dict_data values (620, 20, '个', '20', 'cmc_unit', null, 'default', 'N', '0', 'admin', '2022-10-14 11:20:17', '', null, null);

-- ----------------------------
-- 13、参数配置表
-- ----------------------------
drop table if exists sys_config;
create table sys_config (
  config_id         int(5)          not null auto_increment    comment '参数主键',
  config_name       varchar(100)    default ''                 comment '参数名称',
  config_key        varchar(100)    default ''                 comment '参数键名',
  config_value      varchar(500)    default ''                 comment '参数键值',
  config_type       char(1)         default 'N'                comment '系统内置（Y是 N否）',
  create_by         varchar(64)     default ''                 comment '创建者',
  create_time       datetime                                   comment '创建时间',
  update_by         varchar(64)     default ''                 comment '更新者',
  update_time       datetime                                   comment '更新时间',
  remark            varchar(500)    default null               comment '备注',
  primary key (config_id)
) engine=innodb auto_increment=100 comment = '参数配置表';

insert into sys_config values(1, '主框架页-默认皮肤样式名称',     'sys.index.skinName',            'skin-blue',     'Y', 'admin', sysdate(), '', null, '蓝色 skin-blue、绿色 skin-green、紫色 skin-purple、红色 skin-red、黄色 skin-yellow' );
insert into sys_config values(2, '用户管理-账号初始密码',         'sys.user.initPassword',         '123456',        'Y', 'admin', sysdate(), '', null, '初始化密码 123456' );
insert into sys_config values(3, '主框架页-侧边栏主题',           'sys.index.sideTheme',           'theme-dark',    'Y', 'admin', sysdate(), '', null, '深色主题theme-dark，浅色主题theme-light' );
insert into sys_config values(4, '账号自助-验证码开关',           'sys.account.captchaEnabled',    'false',          'Y', 'admin', sysdate(), '', null, '是否开启验证码功能（true开启，false关闭）');
insert into sys_config values(5, '账号自助-是否开启用户注册功能', 'sys.account.registerUser',      'false',         'Y', 'admin', sysdate(), '', null, '是否开启注册用户功能（true开启，false关闭）');
insert into sys_config values(6, '用户登录-黑名单列表',           'sys.login.blackIPList',         '',              'Y', 'admin', sysdate(), '', null, '设置登录IP黑名单限制，多个匹配项以;分隔，支持匹配（*通配、网段）');


-- ----------------------------
-- 14、系统访问记录
-- ----------------------------
drop table if exists sys_logininfor;
create table sys_logininfor (
  info_id        bigint(20)     not null auto_increment   comment '访问ID',
  user_name      varchar(50)    default ''                comment '用户账号',
  ipaddr         varchar(128)   default ''                comment '登录IP地址',
  login_location varchar(255)   default ''                comment '登录地点',
  browser        varchar(50)    default ''                comment '浏览器类型',
  os             varchar(50)    default ''                comment '操作系统',
  status         char(1)        default '0'               comment '登录状态（0成功 1失败）',
  msg            varchar(255)   default ''                comment '提示消息',
  login_time     datetime                                 comment '访问时间',
  primary key (info_id),
  key idx_sys_logininfor_s  (status),
  key idx_sys_logininfor_lt (login_time)
) engine=innodb auto_increment=100 comment = '系统访问记录';


-- ----------------------------
-- 15、定时任务调度表
-- ----------------------------
drop table if exists sys_job;
create table sys_job (
  job_id              bigint(20)    not null auto_increment    comment '任务ID',
  job_name            varchar(64)   default ''                 comment '任务名称',
  job_group           varchar(64)   default 'DEFAULT'          comment '任务组名',
  invoke_target       varchar(500)  not null                   comment '调用目标字符串',
  cron_expression     varchar(255)  default ''                 comment 'cron执行表达式',
  misfire_policy      varchar(20)   default '3'                comment '计划执行错误策略（1立即执行 2执行一次 3放弃执行）',
  concurrent          char(1)       default '1'                comment '是否并发执行（0允许 1禁止）',
  status              char(1)       default '0'                comment '状态（0正常 1暂停）',
  create_by           varchar(64)   default ''                 comment '创建者',
  create_time         datetime                                 comment '创建时间',
  update_by           varchar(64)   default ''                 comment '更新者',
  update_time         datetime                                 comment '更新时间',
  remark              varchar(500)  default ''                 comment '备注信息',
  primary key (job_id, job_name, job_group)
) engine=innodb auto_increment=100 comment = '定时任务调度表';

insert into sys_job values(1, '系统默认（无参）', 'DEFAULT', 'ryTask.ryNoParams',        '0/10 * * * * ?', '3', '1', '1', 'admin', sysdate(), '', null, '');
insert into sys_job values(2, '系统默认（有参）', 'DEFAULT', 'ryTask.ryParams(\'ry\')',  '0/15 * * * * ?', '3', '1', '1', 'admin', sysdate(), '', null, '');
insert into sys_job values(3, '系统默认（多参）', 'DEFAULT', 'ryTask.ryMultipleParams(\'ry\', true, 2000L, 316.50D, 100)',  '0/20 * * * * ?', '3', '1', '1', 'admin', sysdate(), '', null, '');


-- ----------------------------
-- 16、定时任务调度日志表
-- ----------------------------
drop table if exists sys_job_log;
create table sys_job_log (
  job_log_id          bigint(20)     not null auto_increment    comment '任务日志ID',
  job_name            varchar(64)    not null                   comment '任务名称',
  job_group           varchar(64)    not null                   comment '任务组名',
  invoke_target       varchar(500)   not null                   comment '调用目标字符串',
  job_message         varchar(500)                              comment '日志信息',
  status              char(1)        default '0'                comment '执行状态（0正常 1失败）',
  exception_info      varchar(2000)  default ''                 comment '异常信息',
  create_time         datetime                                  comment '创建时间',
  primary key (job_log_id)
) engine=innodb comment = '定时任务调度日志表';


-- ----------------------------
-- 17、通知公示表
-- ----------------------------
drop table if exists sys_notice;
create table sys_notice (
  notice_id         int(4)          not null auto_increment    comment '公示ID',
  notice_title      varchar(50)     not null                   comment '标题',
  notice_type       char(1)         not null                   comment '类型（1通知 2公示）',
  notice_content    longblob        default null               comment '内容',
  status            char(1)         default '0'                comment '状态（0正常 1关闭）',
  create_by         varchar(64)     default ''                 comment '创建者',
  create_time       datetime                                   comment '创建时间',
  update_by         varchar(64)     default ''                 comment '更新者',
  update_time       datetime                                   comment '更新时间',
  remark            varchar(255)    default null               comment '备注',
  primary key (notice_id)
) engine=innodb auto_increment=10 comment = '通知公示表';

-- ----------------------------
-- 初始化-公示信息表数据
-- ----------------------------
INSERT INTO sys_notice VALUES (1, '关于新版OA系统上线公测的通知', '1', 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管理员', '2024-07-17', NULL, NULL, NULL);

-- ----------------------------
-- 18、代码生成业务表
-- ----------------------------
drop table if exists gen_table;
create table gen_table (
  table_id          bigint(20)      not null auto_increment    comment '编号',
  table_name        varchar(200)    default ''                 comment '表名称',
  table_comment     varchar(500)    default ''                 comment '表描述',
  sub_table_name    varchar(64)     default null               comment '关联子表的表名',
  sub_table_fk_name varchar(64)     default null               comment '子表关联的外键名',
  class_name        varchar(100)    default ''                 comment '实体类名称',
  tpl_category      varchar(200)    default 'crud'             comment '使用的模板（crud单表操作 tree树表操作）',
  tpl_web_type      varchar(30)     default ''                 comment '前端模板类型（element-ui模版 element-plus模版）',
  package_name      varchar(100)                               comment '生成包路径',
  module_name       varchar(30)                                comment '生成模块名',
  business_name     varchar(30)                                comment '生成业务名',
  function_name     varchar(50)                                comment '生成功能名',
  function_author   varchar(50)                                comment '生成功能作者',
  gen_type          char(1)         default '0'                comment '生成代码方式（0zip压缩包 1自定义路径）',
  gen_path          varchar(200)    default '/'                comment '生成路径（不填默认项目路径）',
  options           varchar(1000)                              comment '其它生成选项',
  create_by         varchar(64)     default ''                 comment '创建者',
  create_time 	    datetime                                   comment '创建时间',
  update_by         varchar(64)     default ''                 comment '更新者',
  update_time       datetime                                   comment '更新时间',
  remark            varchar(500)    default null               comment '备注',
  primary key (table_id)
) engine=innodb auto_increment=1 comment = '代码生成业务表';


-- ----------------------------
-- 19、代码生成业务表字段
-- ----------------------------
drop table if exists gen_table_column;
create table gen_table_column (
  column_id         bigint(20)      not null auto_increment    comment '编号',
  table_id          bigint(20)                                 comment '归属表编号',
  column_name       varchar(200)                               comment '列名称',
  column_comment    varchar(500)                               comment '列描述',
  column_type       varchar(100)                               comment '列类型',
  java_type         varchar(500)                               comment 'JAVA类型',
  java_field        varchar(200)                               comment 'JAVA字段名',
  is_pk             char(1)                                    comment '是否主键（1是）',
  is_increment      char(1)                                    comment '是否自增（1是）',
  is_required       char(1)                                    comment '是否必填（1是）',
  is_insert         char(1)                                    comment '是否为插入字段（1是）',
  is_edit           char(1)                                    comment '是否编辑字段（1是）',
  is_list           char(1)                                    comment '是否列表字段（1是）',
  is_query          char(1)                                    comment '是否查询字段（1是）',
  query_type        varchar(200)    default 'EQ'               comment '查询方式（等于、不等于、大于、小于、范围）',
  html_type         varchar(200)                               comment '显示类型（文本框、文本域、下拉框、复选框、单选框、日期控件）',
  dict_type         varchar(200)    default ''                 comment '字典类型',
  sort              int                                        comment '排序',
  create_by         varchar(64)     default ''                 comment '创建者',
  create_time 	    datetime                                   comment '创建时间',
  update_by         varchar(64)     default ''                 comment '更新者',
  update_time       datetime                                   comment '更新时间',
  primary key (column_id)
) engine=innodb auto_increment=1 comment = '代码生成业务表字段';


-- ----------------------------
-- 20、cmc考核表
-- ----------------------------
drop table if exists cmc_assess;
create table cmc_assess (
  assess_id				char(19)		not null		comment '总考核表id',
  user_id				bigint			default null	comment '用户id',
  project_id			char(19)		default null	comment '项目id',
  assess_time			date			default null	comment '考核时间（月份）',
  dept_assessment		char(1)			default null	comment '部门考核等级（不合格、合格、良好、优秀）',
  dept_advice			varchar(255)	default null	comment '部门考核意见',
  dept_time				date			default null	comment '部门考核时间',
  dept_assesser			bigint			default null	comment '部门考核负责人',
  manager_assessment	char(1)			default null	comment '分管考核等级（不合格、合格、良好、优秀）',
  manager_advice		varchar(255)	default null	comment '分管考核意见',
  manager_time			date			default null	comment '分管考核时间',
  manager_assesser		bigint			default null	comment '分管考核负责人',
  self_assess			varchar(255)	default null	comment '自述',
  fill_time				date			default null	comment '考核填报时间',
  other_work			varchar(255)	default null	comment '其他工作',
  primary key (assess_id)
) engine=innodb	comment = 'cmc考核表';


-- ----------------------------
-- 21、cmc考核内容表
-- ----------------------------
drop table if exists cmc_assess_content;
create table cmc_assess_content (
  content_id			char(21)		not null		comment '考核内容id(总考核表id+2位)',
  role					varchar(17)		default null	comment '承担角色',
  familiar				char(1)			default null	comment '熟练程度（生疏、熟练、精通）',
  remark				varchar(255)	default null	comment '备注',
  workload				char(1)			default null	comment '工作量（较少、正常、较多）',
  skill					char(1)			default null	comment '技能掌握（生疏、较熟练、熟练）',
  quality				char(1)			default null	comment '产品质量（不合格、合格、良好、优秀）',
  assessment			char(1)			default null	comment '岗位表现（不合格、合格、良好、优秀）',
  advice				varchar(255)	default null	comment '考核建议',
  primary key (content_id)
) engine=innodb	comment = 'cmc考核内容表';


-- ----------------------------
-- 22、cmc考核工作内容表
-- ----------------------------
drop table if exists cmc_assess_content_work;
create table cmc_assess_content_work (
  work_id				char(23)		not null		comment '工作内容id(考核内容id+2位)',
  work_load				varchar(10)		default null	comment '工作量',
  primary key (work_id)
) engine=innodb	comment = 'cmc考核工作内容表';


-- ----------------------------
-- 23、cmc项目表
-- ----------------------------
drop table if exists cmc_project;
create table cmc_project  (
  project_id			char(19)				not null 			comment '项目id',
  project_number		varchar(20)				default null		comment '项目编号',
  project_name			varchar(60)				default null		comment '项目名称',
  project_leader		bigint					default null		comment '项目负责人',
  is_finished			char(1)					default null		comment '项目状态（0进行中、1已结束）',
  project_source		char(1)					default null		comment '项目来源（0院内、1院外）',
  party_a_id			varchar(50)				default null		comment '甲方单位',
  contact_person		varchar(50)				default null		comment '联系人',
  telephone				char(50)				default null		comment '联系电话',
  project_type			varchar(20)				default null		comment '项目类型',
  project_level			char(1)					default null		comment '项目级别（0一般项目、1重大项目）',
  project_registrant	bigint					default null		comment '项目登记人',
  undertaking_dept		varchar(20)				default null		comment '承担部门',
  project_planner		bigint					default null		comment '项目安排人',
  site_leader			bigint					default null		comment '现场负责人',
  organize_document		varchar(255)			default null		comment '组织交底文档',
  register_time			date					default null		comment '项目登记时间',
  organize_time			date					default null		comment '组织交底时间',
  plan_time				date					default null		comment '项目安排时间',
  entry_time			date					default null		comment '进场时间',
  exit_time				date					default null		comment '撤场时间',
  remark				varchar(255)			default null		comment '项目备注',
  project_kml			varchar(255)			default null		comment '范围kml地址',
  project_cp			varchar(255)			default null		comment '控制点kml地址',
  kml_lng				varchar(255)			default null		comment 'kml文件的中心位置经度',
  kml_lat				varchar(255)			default null		comment 'kml文件的中心位置纬度',
  cars					varchar(255)			default null		comment '项目用车',
  drivers				varchar(255)			default null		comment '项目驾驶员',
  devices				varchar(255)			default null		comment '项目设备',
  participates			varchar(255)			default null		comment '项目参与人员',
  task_document			varchar(255)			default null		comment '项目任务书',
  project_request		varchar(255)			default null		comment '项目提交要求',
  primary key (project_id)
) engine = innodb comment = 'cmc项目表';

-- ----------------------------
-- 初始化-项目表数据
-- ----------------------------
INSERT INTO `cmc_project` VALUES ('1648881410480275457', '2023C39', '理塘抽水蓄能电站规划阶段测绘', 33, '0', '0', '0231', '龙宇杰、樊贵军', '15198088143、18782934837', '地形图测绘', '0', 13, '111,107', 112, 33, NULL, '2023-04-17', NULL, '2023-04-17', '2023-04-19', '2023-04-22', '坐标系及高程系须与用户落实。工期为暂定工期，如有变化请及时跟用户沟通。', NULL, NULL, NULL, NULL, NULL, NULL, '153', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410534801409', '2023C38', '川藏（雅安）工业园区综合服务中心1:500地形图测绘', NULL, '0', '0', '0227', '黄文虎、张翼（业主）', '13982236680、18280085783', '地形图测绘', '0', 20, '111', 112, NULL, NULL, '2023-04-12', NULL, '2023-04-13', '2023-04-14', '2023-04-15', '完成后尽快提交成果给城乡分公司使用', NULL, NULL, '103.27606061', '30.17020904', '4', '136', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410555772930', '2023C37', '资中县供销示范高标准农田1:2000地形地类图测绘', 66, '0', '0', '0227', '王勇', '15928683672', '地形图测绘', '0', 20, '107,110', 112, 66, NULL, '2023-04-11', NULL, '2023-04-11', '2023-04-12', '2023-04-17', NULL, NULL, NULL, NULL, NULL, '3', '135', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410572550145', '2023C36', '龚嘴水电站鱼道工程渣场地形图测绘', NULL, '0', '0', '0231', '龙宇杰、刘成英', '15198088143、13541216976', '地形图测绘', '0', 20, '111', 112, NULL, NULL, '2023-04-10', NULL, '2023-04-11', '2023-04-12', '2023-04-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '101,166,10,130', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410593521666', '2023C35', '雅砻江右岸洛俄昔集镇1:2000地形地类图测绘', 84, '0', '0', '0227', '干尚伟', '13980874941', '地形图测绘', '0', 20, '111,201', 112, 122, NULL, '2023-04-10', NULL, '2023-04-10', '2023-04-16', '2023-04-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410610298882', '2023W14', '苍溪抽水蓄能电站规划阶段工程勘察', 116, '0', '1', '0008', '徐鹏副局长', '13981267988', '勘察', '0', 13, '113', 112, 116, NULL, '2023-04-07', NULL, '2023-04-09', '2023-04-11', '2023-04-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '166', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270401', '2023W15', '苍溪抽水蓄能电站规划阶段测绘工作', 144, '0', '1', '0008', '徐鹏副局长', '13981267988', '地形图测绘', '0', 13, '107,115', 112, 144, NULL, '2023-04-07', NULL, '2023-04-09', '2023-04-15', '2023-04-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270402', '2023W16', '泸定水电站2023年水库泥沙监测服务', 15, '0', '1', '0163', '叶坤', '15928893626', '泥沙监测', '0', 22, '115', 112, 145, NULL, '2023-05-08', NULL, '2023-05-09', '2023-05-15', '2023-06-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '167', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270403', '2023W17', 'G108原路改建项目', 32, '0', '1', '0260', '宁瑶', NULL, '激光扫描', '0', 13, '107', 112, 33, NULL, '2023-05-10', NULL, '2023-05-10', '2023-05-08', '2023-05-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270404', '2023W18', '美玉、田妥光伏项目工程地质勘察及地形图测绘', 116, '0', '1', '0240', NULL, NULL, '工程测量及勘察技术服务', '0', 13, '113,116', 112, 149, NULL, '2023-05-11', NULL, '2023-05-11', '2023-05-03', '2023-06-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '118', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270405', '2023W19', '国网拉萨发电公司2023年直孔、羊湖电站变形监测及资料整编技术服务合同', 101, '1', '1', '0085', '达娃', '13989098812', '工程监测', '0', 22, '112', 112, 109, NULL, '2023-05-15', NULL, '2023-05-15', '2023-03-01', '2024-01-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270406', '2023W20', '简阳地形图测绘', 112, '0', '1', '0178', '向工、周总', '18080391320、13997038808', '地形图测绘', '0', 13, '106', 112, 112, NULL, '2023-05-19', NULL, '2023-05-19', '2023-05-13', '2023-05-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270407', '2023W21', '大渡河公司大岗山水电站大坝及库岸边坡监测设备设施完善工程合同', 101, '0', '1', '0079', '刘凤玲', '15983535071', '监测项目', '0', 22, '112', 112, 101, NULL, '2023-06-08', NULL, '2023-06-09', '2023-06-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '85,63', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270408', '2023W22', '湖南临澧停弦渡镇九龙村美丽乡村无人机三维实景建设', 32, '0', '1', '0196', NULL, NULL, '三维实景模型', '0', 13, '108,111,107', 112, NULL, NULL, '2023-07-03', NULL, '2023-07-03', NULL, NULL, '科研合作项目，提供支撑，不收费', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270409', '2023W23', '马来西亚东海岸铁路项目精测网复测', 15, '0', '1', '0191', NULL, NULL, '控制测量', '0', 13, '115', 112, 144, NULL, '2023-07-06', NULL, '2023-07-07', '2023-08-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '85,94,62,95,209,45', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270410', '2023W24', '双流地形图测绘', 61, '0', '1', '0178', '向工、周总', '18080391320、13997038808', '地形图测绘', '0', 13, '110', 112, 72, NULL, '2023-07-12', NULL, '2023-07-12', '2023-07-12', '2023-07-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270411', '2023W25', '平昌实景三维模型试点项目', 32, '0', '1', '0038', '李志远', '13208465816', '三维实景模型', '0', 13, '107', 112, 34, NULL, '2023-07-14', NULL, '2023-07-14', '2023-07-16', '2023-07-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '163,98,111', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270412', '2023W26', '巴福大健康组团路网一标段第三方监测外协合同协议书', 138, '0', '1', '0275', '刘洋', NULL, '工程监测', '0', 22, '114', 112, 138, NULL, '2023-07-13', NULL, '2023-07-17', '2023-04-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '106', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270413', '2023W27', '简阳1:2000地形图测绘', 71, '0', '1', '0262', '马汉宏、李春生', '18676137776、18628072166', '地形图测绘', '0', 20, '110', 112, 71, NULL, '2023-07-28', NULL, '2023-07-28', '2023-07-25', '2023-07-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270414', '2023W28', '安州区黄洞子沟河道清淤项目测绘工作', 61, '0', '1', NULL, '昝鹏', '13982188793', '地形图测绘', '0', 13, '110', 112, NULL, NULL, '2023-09-18', NULL, '2023-09-18', '2023-09-16', '2023-09-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '108,160,75,93', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270415', '2023W29', '喀什地区乡镇国土空间总体规划和村庄规划1:500基础地形数据生产项目', 32, '0', '1', '0099', '吴博', '13909989086', '地形图测绘', '0', 13, '107,106', 112, NULL, NULL, '2023-10-10', NULL, '2023-10-11', '2023-10-15', '2023-11-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270416', '2023W30', '天府新区万安街道高饭店街李家大院迁建保护工程', 116, '0', '1', '0187', '龚老师', '15928721059', '工程测量及勘察技术服务', '0', 13, '113', 112, 118, NULL, '2023-10-18', NULL, '2023-10-19', '2023-10-19', '2023-10-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270417', '2023W31', '黄河干流四川段防洪治理工程初设阶段勘察工作', 112, '0', '1', '0090', '索二峰', '13903866104', '工程测量及勘察技术服务', '0', 13, '107,106,110', 112, 112, NULL, '2023-10-18', NULL, '2023-10-20', '2023-10-22', '2023-11-10', NULL, NULL, NULL, NULL, NULL, '4', '136', '102,155,66,199,213,100', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270418', '2023W32', '雅砻江桐子林水电站库区滑坡体测斜钻孔恢复合同', 102, '0', '1', '0202', '王登菊', '0812-3331975', '其他测绘技术服务', '0', 13, '112', 11, 102, NULL, '2023-10-31', NULL, '2023-10-31', '2023-10-24', '2024-02-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270419', '2023W33', '琼结县第三次全国土壤普查项目', 80, '0', '1', '0137', '邹帅民、洛桑顿珠', '13989035510', '其他测绘技术服务', '0', 22, '106', 59, 80, NULL, '2023-11-13', NULL, '2023-11-13', '2023-11-14', NULL, '本项目为双乙方合同', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270420', '2023W34', '国能青海黄河玛尔挡水电站库区水温观测服务', 102, '0', '1', '0082', '唐浩轩（甲方具体负责人）', '18708879970', '其他测绘技术服务', '0', 24, '112', 112, 113, NULL, '2023-11-16', NULL, '2023-11-16', '2023-12-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270421', '2023W35', '国能青海黄河玛尔挡水电站水库泥沙监测合同', 59, '0', '1', '0082', '朱静、杨朔', '18394669966', '泥沙监测', '0', 22, '106', 59, NULL, NULL, '2023-11-17', NULL, '2023-11-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270422', '2023W36', '大唐观音岩水电站2023年度变形监测控制网复测及坝前淤积和坝后冲刷测量项目', 102, '0', '1', '0039', NULL, '19908020388', '变形监测控制网及地形测量', '0', 13, '112', 112, 103, NULL, '2023-11-23', NULL, '2023-11-23', '2023-12-06', '2024-01-01', NULL, NULL, NULL, NULL, NULL, '3', '135', '107,213,9,130,34', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270423', '2023W37', '大唐长河坝115万千瓦光伏项目1:2000地形图测绘', 71, '0', '1', '0184', '王羿磊', '13518121892', '地形图测绘', '0', 13, '107,110', 112, 71, NULL, '2023-12-25', NULL, '2023-12-26', '2023-12-28', '2024-01-05', NULL, NULL, NULL, NULL, NULL, '2', '16', '11,15,98,92,90,93,96,172', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270424', '2024C01', '石棉县挖角集镇排洪渠1:1000地形图测绘', 15, '0', '0', '0227', '王勇', '15928683672', '地形图测绘', '0', 20, '112,107,115', 112, 107, NULL, '2024-01-05', NULL, '2024-01-05', '2024-01-06', '2024-01-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '200', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270425', '2024C02', '溪洛渡水电站永善移民配合测量', 83, '0', '0', '0227', '周显雨', '13887074308', '实物指标配合调查', '0', 20, '111', 112, 63, NULL, '2024-01-05', NULL, '2024-01-05', '2024-01-08', '2024-01-12', NULL, NULL, NULL, NULL, NULL, '3', '135', '220,93', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270426', '2024C03', '川藏铁路康定段三道桥放线配合测量', 84, '0', '0', '0227', '周良坤', '13458665641', '配合测量', '0', 20, '111,110', 112, 63, NULL, '2024-01-10', NULL, '2024-01-11', '2024-01-15', '2024-01-17', NULL, NULL, NULL, NULL, NULL, '2', '137', '99,164', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270427', '2024C04', '大熊猫国家公园芦山县保护管理设施项目地形图测绘', 84, '0', '0', '0227', '凌源媛', '15320349072', '地形图测绘', '0', 20, '111,110', 112, 63, NULL, '2024-01-17', NULL, '2024-01-18', '2024-01-17', '2024-01-18', NULL, NULL, NULL, NULL, NULL, '6', '132', '9,143', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270428', '2024C05', '卡瓦白庆抽水蓄能电站可研阶段地形图测绘', 143, '0', '0', '0231', '龙宇杰、曲海珠', '15198088143、13880416677', '地形图测绘', '0', 13, '107,115', 112, 34, NULL, '2024-01-17', NULL, '2024-01-17', '2024-01-18', '2024-01-28', NULL, NULL, NULL, NULL, NULL, '4', '136', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270429', '2024C06', '安徽芜湖西形冲抽水蓄能电站建设征地界桩测设及居民点等地形地类图测绘', 83, '0', '0', '0227', '冯春', '13981823592', '地形地类图测绘', '0', 20, '111,115', 59, 95, NULL, '2024-02-21', NULL, '2024-02-22', '2024-02-26', '2024-03-13', NULL, NULL, NULL, NULL, NULL, '2', '137', '213,6,224,106,106,158,155,165,162,221', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270430', '2024C07', '绵竹抽水蓄能电站技施阶段测绘工作', 76, '1', '0', '0231', '龙宇杰、蒋陶', '15198088143、13568827702', '断面', '0', 13, '110', 59, 76, NULL, '2024-02-27', NULL, '2024-02-27', '2024-02-28', '2024-03-02', NULL, NULL, NULL, NULL, NULL, '4', '136', '61,103,109,20,93,92', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270431', '2024C08', '猴子岩水电站江口村及周边1:1000地形地类图测绘', 71, '0', '0', '0227', '金勇、李鑫', '13550046031、13518143295', '地形地类图测绘', '0', 20, '110', 59, 71, NULL, '2024-02-27', NULL, '2024-02-27', '2024-02-26', '2024-03-01', NULL, NULL, NULL, NULL, NULL, NULL, '16', '12,176', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270432', '2024C10', 'ABH卫星影像采购及1:10000地形图测绘', 83, '0', '0', '0231', '龙宇杰、蒙富强', '15198088143、13547829339', '地形图测绘', '0', 13, '111', 59, 94, NULL, '2024-03-06', NULL, '2024-03-07', '2024-03-17', '2024-03-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '87,143,213', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270433', '2024C11', '双江口水电站可研阶段梭磨河松岗电站、热足电站地形图测绘', 83, '0', '0', '0231', '龙宇杰、马行东', '15198088143、13795668566', '地形图测绘', '0', 13, '111', 59, 83, NULL, '2024-03-12', NULL, '2024-03-12', '2024-03-14', '2024-03-16', NULL, NULL, NULL, NULL, NULL, '4', '136', '113,18,108,165,103', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270434', '2024C12', '雅砻江牙根二级水电站库区公路地形图补测', 71, '0', '0', '0229', '田鸿程', '18728431232', '地形图测绘', '0', 20, '110', 59, 71, NULL, '2024-03-12', NULL, '2024-03-12', '2024-03-26', '2024-03-30', NULL, NULL, NULL, NULL, NULL, '5', '130', '97,86,210,152,154,7,7', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270435', '2024C13', '双江口水电站200万kw光伏项目地形图测绘工作(双江口测绘Ⅱ标段)', 71, '0', '0', '0238', '王雅雯、祝锐', '15008405727、18716280030', '地形图测绘', '0', 22, '107,110', 59, 71, NULL, '2024-03-19', NULL, '2024-03-19', '2024-03-20', '2024-04-03', NULL, NULL, NULL, NULL, NULL, '2', '137', '223,220,110,221,6,144,146,83,12', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270436', '2024C14', 'JW梯级水电站白马西路河特殊过流影响专题研究工作断面测量工作', 83, '0', '0', '0231', '龙宇杰、王锐', '15198088143、18086831070', '断面泥沙测量', '0', 13, '111', 59, 83, NULL, '2024-03-26', NULL, '2024-03-27', '2024-04-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '155,150,143,140,20,102,111,64,66,117', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270437', '2024C15', '双江口水电站库区标识牌制作及埋设', 94, '0', '0', '0227', '金勇、王荣方', '13550046031、18980377169', '界桩测设', '0', 20, '111', 59, 94, NULL, '2024-03-28', NULL, '2024-03-28', '2024-04-01', '2024-04-09', NULL, NULL, NULL, NULL, NULL, '9', '134', '108,20,65', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270438', '2024C16', 'ML公路放线测量', 71, '0', '0', '0229', '杨锐', '15208223387', '公路测量', '0', 20, '110', 59, 71, NULL, '2024-04-03', NULL, '2024-04-03', '2024-04-15', '2024-05-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '100,109,98', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270439', '2024C17', '华电木里沙湾一期风电项目可研阶段地形图测绘', 32, '0', '0', '0238', '王雅雯', '15008405727', '地形图测绘', '0', 26, '111,107,115,110', 59, 35, NULL, '2024-04-09', NULL, '2024-04-09', '2024-04-10', '2024-05-28', NULL, NULL, NULL, NULL, NULL, '9', '134', '11,107,109,108,153,144,200', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270440', '2024C18', '威远抽水蓄能电站预可阶段1:10000地形图测绘', 60, '0', '0', '0231', '龙宇杰、黄春', '15198088143、18202868267', '地形图测绘', '0', 13, '110', 59, 66, NULL, '2024-04-23', NULL, '2024-04-23', '2024-04-30', '2024-04-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '93,157,18', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270441', '2024C19', '色达抽水蓄能电站1:5000地形图测绘', 33, '0', '0', '0231', '龙宇杰、刘文锐', '15198088143、18328504197', '地形图测绘', '0', 13, '107,110', 59, 33, NULL, '2024-04-23', NULL, '2024-04-23', '2024-04-24', '2024-05-28', NULL, NULL, NULL, NULL, NULL, '9', '134', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270442', '2024C20', '红原刷经寺抽水蓄能电站枢纽区1:2000地形图测绘', NULL, '0', '0', '0231', '龙宇杰、曲海珠', '15198088143、13880416677', '地形图测绘', '0', 13, NULL, NULL, NULL, NULL, '2024-04-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270443', '2024C21', '四川省屏山书楼抽水蓄能电站工程区1:1000地形图测绘', 33, '0', '0', '0231', '龙宇杰、王世春', '15198088143、13982028450', '地形图测绘', '0', 20, '107,110', 59, 33, NULL, '2024-04-25', NULL, '2024-04-29', '2024-05-04', '2024-05-17', NULL, NULL, NULL, NULL, NULL, '4', '136', '146,109,98', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270444', '2024C22', '牙根至楞古环保航拍项目', 32, '0', '0', '0234', '张磊', '15196577699', '三维模型及视频制作', '0', 13, '107', 59, 34, NULL, '2024-05-06', NULL, '2024-05-06', '2024-05-06', '2024-05-22', NULL, NULL, NULL, NULL, NULL, '2', '137', '154,152,177,176,165,104,168,11,222', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270445', '2024C23', '山西省沁水县龙港抽水蓄能电站界桩测设等工作', 63, '0', '0', '0227', '刘建', '13982170084', '界桩测设', '0', 13, '110', 59, 63, NULL, '2024-05-14', NULL, '2024-05-14', '2024-05-20', '2024-06-05', '具体完成时间待定，以甲方要求为准', NULL, NULL, NULL, NULL, '3', '135', '92,99,18,110', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270446', '2024C24', 'JW电站可研阶段（环保专题）测绘', 83, '0', '0', '0234', '赵院波', '15611093326', '地形图测绘', '0', 13, '111', 59, 95, NULL, '2024-05-21', NULL, '2024-05-21', '2024-05-22', '2024-06-02', '先开展中山生态保护科研园范围工作。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270447', '2024C25', '道孚抽水蓄能电站可研阶段测绘技术服务补充协议', 84, '0', '0', '0231', '李刚', '15390065156', '三维地形面', '0', 22, '111', 59, 84, NULL, '2024-05-23', NULL, '2024-05-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270448', '2024C26', '力丘河口及塔公以上河段1:500地形测绘及现时水边线测量', 61, '0', '0', '0231', '龙宇杰、梁媛', '15198088143、18602868995', '地形图测绘', '0', 13, '107,110', 59, 76, NULL, '2024-06-04', NULL, '2024-06-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270449', '2024C27', '亚龙水电站可研阶段地形图测绘', 94, '0', '0', '0231', '龙宇杰、刘永波', '15198088143、13438137962', '地形图测绘', '0', 13, '111,107', 59, 94, NULL, '2024-06-04', NULL, '2024-06-04', '2024-06-08', '2024-06-22', NULL, NULL, NULL, NULL, NULL, '4', '136', '104,109,107,233', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270450', '2024C28', 'ML及JW界桩测设工作', 83, '0', '0', '0227', '干尚伟', '13980874941', '界桩测设', '0', 20, '111', 59, 83, NULL, '2024-06-06', NULL, '2024-06-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '5', '130', '104,18', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270451', '2024W01', '重庆区县建成区实景三维制作', 32, '0', '1', '0275', '马红', '17723881291', '三维实景模型', '0', 13, '108,107', 112, 35, NULL, '2024-01-04', NULL, '2024-01-04', '2024-01-05', '2024-03-23', NULL, NULL, NULL, NULL, NULL, '6', '134', '109', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270452', '2024W02', '凤山平乐风电场地形图测绘', 72, '0', '1', '0239', '姚鹏', '15361284599', '地形图测绘', '0', 13, '107,116,110', 112, 72, NULL, '2024-01-12', NULL, '2024-01-13', '2024-01-15', '2024-02-04', NULL, NULL, NULL, NULL, NULL, '2', '137', '92,96,6,158,155,154,64,61,113,15', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270453', '2024W03', '雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测（2024年）', 102, '0', '1', '0200', '高翠峰', NULL, '工程监测', '0', 13, '112', 112, 102, NULL, '2024-01-26', NULL, '2024-01-26', '2024-01-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270454', '2024W04', '雅砻江桐子林水电站大坝外部变形和近坝区滑坡体观测（2024年）', 102, '0', '1', '0202', '高翠峰', '0812-3331998', '工程监测', '0', 22, '112', 112, 102, NULL, '2024-01-29', NULL, '2024-01-30', '2024-01-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270455', '2024W05', '四川省脚木足河巴拉水电站工程测量中心技术服务(2024年)', 120, '0', '1', '0186', NULL, NULL, '工程测量中心', '0', 22, '204', 112, 120, NULL, '2024-01-29', NULL, '2024-01-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270456', '2024W06', '四川大渡河双江口水电站枢纽工程测量中心服务（2024年）', 120, '0', '1', '0159', '李锋', NULL, '工程测量中心', '0', 22, '202', 112, 120, NULL, '2024-01-29', NULL, '2024-01-30', NULL, NULL, '四川大渡河双江口水电站枢纽工程测绘技术服务合同（2017年）CMC2H17015', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270457', '2024W07', '大渡河金川水电站工程测量中心劳务配合（2024年）', 121, '0', '1', '0242', '杨木子', '15274878801', '工程测量中心', '0', 22, '203', 112, 121, NULL, '2024-01-29', NULL, '2024-01-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270458', '2024W08', '国能四川阿水电力开发有限公司绰斯甲水电站工程测量中心技术服务（2024年）', 121, '0', '1', '0083', '刘胜', '17780674912、028-85935753', '工程测量中心', '0', 22, '203', 112, 121, NULL, '2024-01-29', NULL, '2024-01-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '100', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270459', '2024W09', '四川省雅砻江两河口水电站工程测量中心服务（2024年）', 122, '0', '1', '0201', '钱俊锦', NULL, '工程测量中心', '0', 22, '201', 112, 122, NULL, '2024-01-01', NULL, '2024-01-01', NULL, NULL, '本延期合同的服务期限暂定为2021年1月16日起至2024年1月15日止，共36个月。根据工程进展，经双方协商后，可', NULL, NULL, NULL, NULL, NULL, NULL, '88', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270460', '2024W10', '国网拉萨发电公司2024年羊湖电站取水口水位及压力钢管变形监测控制网复测校核', 109, '0', '1', '0085', '达娃', '13989098812', '变形监测控制网复测', '0', 25, '112', 59, 109, NULL, '2024-03-06', NULL, '2024-03-06', '2024-03-11', NULL, '国网西藏电力有限公司拉萨发电公司2024年第1次非物资竞争性谈判授权采购项目-水电生产服务-31DW01-9005004-', NULL, NULL, NULL, NULL, '1', '137', '88,87', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270461', '2024W11', '国网拉萨发电公司2024年直孔、羊湖电站变形监测及资料整编', 109, '0', '1', '0085', '达娃', '13989098812', '变形监测及资料整编', '0', 25, '112', 59, 109, NULL, '2024-03-06', NULL, '2024-03-06', '2024-03-11', NULL, '国网西藏电力有限公司拉萨发电公司2024年第1次非物资竞争性谈判授权采购项目-综合服务-31DW01-9003001-9999', NULL, NULL, NULL, NULL, NULL, NULL, '106,213', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270462', '2024W12', '第六师106团兵准园区低碳转型新增负荷配套15万千瓦项目勘察工作', 116, '0', '1', '0241', '李忠', '18487123170', '勘察', '0', 13, '113', 59, 118, NULL, '2024-05-06', NULL, '2024-05-07', '2024-06-04', '2024-05-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270463', '2024W13', '雅砻江、大渡河重要栖息地河段地形监测项目断面测量工作', 72, '0', '1', '0091', '田开迪', '13783596070', '断面', '0', 13, '110', 59, 72, NULL, '2024-05-10', NULL, '2024-05-11', '2024-05-13', '2024-06-14', '工期为暂定工期，以与甲方沟通落实为准。', NULL, NULL, NULL, NULL, '5', '130', '81,84,177,213,186,109,107', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270464', '2024W14', '金沙江金沙水电站2024年度泥沙淤积断面及生态流量监测断面测量服务项目合同', 61, '0', '1', '0171', '李女士', '18780188294', '泥沙监测', '0', 13, '110', 59, 61, NULL, '2024-05-22', NULL, '2024-05-22', '2024-05-05', '2024-05-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270465', '2024C29', '南江兴马抽水蓄能电站可研阶段地形图测绘项目', 71, '0', '0', '0231', '龙宇杰、闫勇', '15198088143、13880937699', '地形图测绘', '0', 13, '107,110', 59, 71, NULL, '2024-06-18', NULL, '2024-06-19', '2024-06-20', NULL, NULL, NULL, NULL, NULL, NULL, '9', '134', '93,96,97,86,87,144,146,152,6,154', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270466', '2024C30', '理塘呷洼抽水蓄能电站预可阶段地形图测绘工作', 145, '0', '0', '0231', '龙宇杰、赵程', '15198088143、18428311670', '地形图测绘', '0', 13, '107,115', 59, 145, NULL, '2024-06-19', NULL, '2024-06-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '92,61,145,88,155,65,6,12,168', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410631270467', '2024W15', '水口集团公司水口电站2024年大坝控制网复测服务', 101, '0', '1', '0065', '黄云挥', '18965039555', '施工测量控制网', '0', 22, '112', 59, 103, NULL, '2024-06-21', NULL, '2024-06-24', '2024-07-01', '2024-07-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '4,201,205', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410643853314', '2023W13', '拉萨水环境项目测绘工作', 71, '0', '1', '0184', '祝仁广、刘建', '13699402077、13880783828', '地形图测绘', '0', 13, '110', 11, 71, NULL, '2023-04-07', NULL, '2023-04-07', '2023-04-07', '2023-06-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '62,101,140,113', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410660630529', '2023C34', '阆中抽水蓄能电站规划阶段测绘工作', 144, '0', '0', '0231', '龙宇杰、徐敬武', '15198088143、13540266919', '地形图测绘', '0', 13, '107,115', 112, 144, NULL, '2023-03-29', NULL, '2023-03-30', '2023-04-03', NULL, NULL, NULL, NULL, NULL, NULL, '4', '136', '85,63', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410677407746', '2023W12', '云南昭通激光数据采集项目', 32, '0', '1', '0260', '宁瑶', NULL, '激光扫描', '0', 13, '107', 11, 32, NULL, '2023-03-24', NULL, '2023-03-24', '2023-03-24', '2023-03-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410694184962', '2023C33', '色达抽蓄电站预可阶段测绘', 32, '0', '0', '0231', '龙宇杰、刘文锐', '15198088143、18328504197', '地形图测绘', '0', 13, '107,110', 11, 35, NULL, '2023-03-20', NULL, '2023-03-21', '2023-03-23', '2023-03-31', NULL, NULL, NULL, NULL, NULL, '4', '136', '108,171', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410710962177', '2023C32', '西藏DG二级抽水蓄能电站', 83, '0', '0', '0231', '龙宇杰、王立海', '15198088143、13882264450', '地形图测绘', '0', 20, '111', 112, 83, NULL, '2023-03-16', NULL, '2023-03-16', '2023-04-06', '2023-04-09', NULL, NULL, NULL, NULL, NULL, '2', '16', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410727739393', '2023C31', '草登抽水蓄能电站规划阶段地形图测绘', 143, '0', '0', '0231', '龙宇杰、刘云鹏', '15198088143、15928752650', '地形图测绘', '0', 13, '115', 112, NULL, NULL, '2023-03-16', NULL, '2023-03-17', '2023-03-20', '2023-04-02', '项目要求布四等控制。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410744516610', '2023C30', '牙根二级水电站对外交通地形图更新及局部范围1:2000地形图补测', 144, '0', '0', '0231', '龙宇杰、卜繁健', '15198088143、13708088182', '地形图测绘', '0', 20, '115', 112, 144, NULL, '2023-03-16', NULL, '2023-03-16', '2023-03-16', '2023-03-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410761293825', '2023W11', '四川省盐源县测量标志普查维护工作', 102, '0', '1', '0203', '李建华', '18280674798', '其他测绘技术服务', '0', 22, '112', 112, 103, NULL, '2023-03-13', NULL, '2023-03-14', '2023-03-18', '2023-09-23', NULL, NULL, NULL, NULL, NULL, '6', '137', '49,53,213,55,101,56,54,130,201,114', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410778071042', '2023C29', 'ML坝址实景三维模型及库区电子沙盘制作', 39, '0', '0', '0231', '龙宇杰、彭文明', '15198088143、13541291450', '三维实景模型', '1', 13, '108,111,107,110', 112, NULL, NULL, '2023-03-10', NULL, '2023-03-10', '2023-04-03', NULL, NULL, NULL, NULL, NULL, NULL, '4', '136', '92', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410790653953', '2023C28', '雅砻江孟底沟水电站枢纽区可量测三维实景模型及危岩体配合测量', 39, '1', '0', '0231', '龙宇杰、刘阜羊、梅稚平', '15198088143、13709089944、15881001826', '三维实景模型', '0', 20, '108,115', 112, 144, NULL, '2023-03-10', NULL, '2023-03-10', '2023-03-15', '2023-03-21', '本次任务与孟底沟施工控制网坐标高程系统保持一致，建议从施工控制网点引测。', NULL, NULL, NULL, NULL, '3', '135', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410815819777', '2023C27', '绵竹抽水蓄能水电站营地地形图测绘', 35, '0', '0', '0231', '龙宇杰、徐平', '15198088143、13880238588', '地形图测绘', '0', 20, '107', 112, NULL, NULL, '2023-03-03', NULL, '2023-03-03', '2023-03-04', '2023-03-08', NULL, NULL, NULL, '104.05539902159612', '31.29953469462083', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410832596993', '2023C26', '金沙江上游清洁能源基地叶巴滩混合式抽水蓄能电站地形图测绘', 33, '0', '0', '0231', '唐鑫、曹建平、马宏', '17748784936、13518198185、13882264834', '地形图测绘', '0', 20, '111,107,110', 112, 33, NULL, '2023-03-02', NULL, '2023-03-03', '2023-03-05', '2023-03-24', NULL, NULL, NULL, NULL, NULL, NULL, '16', '106,46,2,153,168,69', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410849374209', '2023C25', '大邑抽水蓄能水电站地形图测绘', 32, '0', '0', '0231', '辜杰为、刘文锐', '13688054695、18328504197', '地形图测绘', '0', 20, '107,110', 112, 35, NULL, '2023-03-02', NULL, '2023-03-03', '2023-03-04', '2023-03-12', NULL, NULL, NULL, '103.3228397636', '30.6740784425', '3', '16', '85,93', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410866151425', '2023C23', 'YX移民项目地形图测绘', 84, '0', '0', '0227', '汪奎、陈歆怡', '18328718961、17383469819', '地形图测绘', '0', 20, '111,110', 112, 83, NULL, '2023-03-01', NULL, '2023-03-01', '2023-03-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410878734337', '2023C22', '牙根一级水电站坝址下游河段整治测绘工作', 61, '0', '0', '0231', '龙宇杰、颜志衡', '15198088143、13688470409', '地形图测绘', '0', 13, '110', 112, 61, NULL, '2023-03-01', NULL, '2023-03-01', '2023-03-20', '2023-03-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410899705858', '2023C24', '岷江干流张坎航电枢纽工程界桩测设工作', 61, '0', '0', '0227', '任宇航', '17382386014', '界桩测设', '0', 20, '110', 112, NULL, NULL, '2023-03-01', NULL, '2023-03-02', '2023-03-09', '2023-04-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '176', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410912288769', '2023C21', '屏山抽水蓄能电站补充测绘工作', NULL, '0', '0', '0231', '龙宇杰、王世春', '15198088143、13982028450', '地形图测绘', '0', 13, '107,110', 112, NULL, NULL, '2023-02-23', NULL, '2023-02-24', '2023-02-25', '2023-02-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410929065985', '2023C20', '平昌抽水蓄能电站（苟家河库址）预可、可研阶段地形图测绘工作', 84, '0', '0', '0231', '龙宇杰、杨光伟（项目经理）', '15198088143、18980568566', '地形图测绘', '0', 13, '111,107', 112, NULL, NULL, '2023-02-22', NULL, '2023-02-24', '2023-02-27', '2023-03-13', NULL, NULL, NULL, NULL, NULL, '7', '133', '59,154', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410945843202', '2023C19', '雅砻江楞古水电站地形地类图测绘', 144, '0', '0', '0231', '龙宇杰、袁琼、黄晨', '15198088143、13882186509、18190716797', '地形图测绘', '0', 20, '115', 112, 144, NULL, '2023-02-21', NULL, '2023-02-21', '2023-02-18', NULL, '提供国家大地2000坐标系，雅砻江坐标系两套成果；高程系统与原高程系统保持一致。', NULL, NULL, NULL, NULL, NULL, NULL, '92,85,101,45', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410962620417', '2023C18', '芦山抽水蓄能电站可研阶段地形图测绘', 145, '0', '0', '0231', '龙宇杰、霍力', '15198088143、13730642158', '地形图测绘', '0', 13, '107,115', 112, 145, NULL, '2023-02-21', NULL, '2023-02-21', '2023-02-23', '2023-02-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '117,66,77,20,11,100', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881410979397634', '2023W10', '青羊区“大运营城惠民”建管并取风貌提升项目——测绘技术服务（暂定）/青羊区建管并举文旅线路风貌提升改', NULL, '0', '1', '0033,0018', '谢老师', '13880769836', '立面测绘', '0', 24, '110', 112, NULL, NULL, '2023-02-21', NULL, '2023-02-22', '2023-02-22', '2023-02-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411000369153', '2023C15', '截弯梯级雅江电站水下地形图测绘', 145, '0', '0', '0231', '龙宇杰、李洪强', '15198088143、13693482878', '地形图测绘', '0', 13, '111,115', 112, 145, NULL, '2023-02-17', NULL, '2023-02-21', '2023-03-05', '2023-03-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '65,80', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411017146369', '2023C17', '江油抽水蓄能水电站青江补水泵断面测量工作', 71, '0', '0', '0231', '龙宇杰、蔡暾', '15198088143、17828073010', '断面', '0', 13, '110', 112, 71, NULL, '2023-02-17', NULL, '2023-02-20', '2023-03-01', '2023-03-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '70,86', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411033923585', '2023C16', '两河口混蓄电站下库进出水口河段测绘', 15, '0', '0', '0231', '龙宇杰、王锐', '15198088143、18086831070', '地形图测绘', '0', 13, '115', 112, 145, NULL, '2023-02-17', NULL, '2023-02-20', '2023-02-06', '2023-02-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411050700802', '2023C13', '大渡河流域扩机规划金川水电站地形图测绘', 84, '0', '0', '0231', '龙宇杰', '15198088143', '地形图测绘', '0', 13, '111,203', 112, 121, NULL, '2023-02-14', NULL, '2023-02-14', '2023-02-21', '2023-02-23', NULL, NULL, NULL, '102.07230173744202', '31.584134288917205', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411067478017', '2023C12', '雅砻江两河口水电站水库泥沙监测系统建设工程、运行维护及泥沙淤积影响分析研究项目测量工作', 61, '0', '0', '0231', '侯国栋', '13488955007', '断面泥沙测量', '0', 13, '110', 112, 61, NULL, '2023-02-14', NULL, '2023-02-14', '2023-03-06', NULL, NULL, NULL, NULL, NULL, NULL, '5', '130', '139,73,34,199,186,84,11,186,10', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411084255234', '2023C14', '大渡河流域扩机规划瀑布沟水电站地形图测绘', 66, '0', '0', '0231', '龙宇杰', '15198088143', '地形图测绘', '0', 13, '110', 112, NULL, NULL, '2023-02-14', NULL, '2023-02-15', '2023-02-20', '2023-03-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411105226753', '2023C09', '洪雅抽水蓄能电站预可阶段地形图测绘', 84, '0', '0', '0231', '龙宇杰、王晓安', '15198088143、13981758359', '地形图测绘', '0', 13, '111,107', 112, 33, NULL, '2023-02-08', NULL, '2023-02-08', '2023-02-09', '2023-03-04', NULL, NULL, NULL, NULL, NULL, '7', '133', '46,165,110', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411122003970', '2023C11', '着巴抽水蓄能电站规划阶段地形图测绘', 33, '0', '0', '0231', '龙宇杰、王勇胜', '15198088143、15928769455', '地形图测绘', '0', 13, '107,110', 112, 33, NULL, '2023-02-08', NULL, '2023-02-09', '2023-02-14', '2023-02-22', NULL, NULL, NULL, NULL, NULL, '4', '136', '48,169', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411138781186', '2023C10', '德登抽水蓄能电站规划阶段地形图测绘', 84, '0', '0', '0231', '龙宇杰、王树平', '15198088143、13678077590', '地形图测绘', '0', 13, '111,107', 112, 33, NULL, '2023-05-18', NULL, '2023-02-08', '2023-05-22', '2023-05-29', NULL, NULL, NULL, NULL, NULL, '4', '136', '48,45,47,16,168,64', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411138781187', '2023C100', '孟底沟水电站人行驿道复建设计地形图测绘', 60, '0', '0', '0227', '陈爽', '17340088515', '地形图测绘', '0', 20, '110', 112, NULL, NULL, '2023-12-13', NULL, '2023-12-14', '2023-12-16', '2024-01-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411138781188', '2023C101', 'ML水电站可研阶段1:1000地形图测绘（A484-2023-05）', 83, '0', '0', '0231', '龙宇杰、王川', '15198088143、18583756579', '地形图测绘', '0', 13, '111', 112, 83, NULL, '2023-12-14', NULL, '2023-12-14', '2023-12-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411138781189', '2023C102', '硬梁包水电站建设征地移民安置土地开发整理临时占地复垦刘河坝1:1000地形图测绘', 112, '0', '0', '0227', '唐波', '18702849394', '地形图测绘', '0', 20, '106', 112, 112, NULL, '2023-12-26', NULL, '2023-12-26', '2023-12-28', NULL, NULL, NULL, NULL, NULL, NULL, '4', '136', '176,177,222,87', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411138781190', '2023C103', '卡瓦白庆抽水蓄能电站1:5000地形图测绘', 84, '0', '0', '0231', '龙宇杰、曲海珠', '15198088143、13880416677', '地形图测绘', '0', 13, '111', 112, NULL, NULL, '2023-12-26', NULL, '2023-12-26', '2023-10-23', '2023-11-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411159752705', '2023C08', '孟底沟水电站2023年地形图测绘', NULL, '0', '0', '0231', '梅稚平、龙宇杰', '15881001826、15198088143', '地形图测绘', '0', 20, '110', 112, NULL, NULL, '2023-02-07', NULL, '2023-02-08', '2023-02-13', '2023-02-19', NULL, NULL, NULL, NULL, NULL, '5', '16', '177,31,100,93,91,66,59', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411184918529', '2023C07', '芦山县市政基础设施恢复1:500地形图测绘', NULL, '0', '0', '0227', '周良坤', '13458665641', '地形图测绘', '0', 20, '110', 112, NULL, NULL, '2023-02-06', NULL, '2023-02-06', '2023-02-07', '2023-02-17', '根据用户要求分批提交资料', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411201695745', '2023C03', '四川得荣抽水蓄能电站预可阶段地形图测绘', 144, '0', '0', '0231', '龙宇杰、聂衍钊', '15198088143、13808230728', '地形图测绘', '0', 13, '107,115', 112, 144, NULL, '2023-02-03', NULL, '2023-02-05', '2023-02-07', NULL, NULL, NULL, NULL, NULL, NULL, '5', '130', '61,7,157,144,167,176', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411218472961', '2023C06', '山西沁水抽水蓄能电站可研阶段灰岩料场地形图测绘', NULL, '0', '0', '0231', '龙宇杰、许韬', '15198088143、13880409922', '地形图测绘', '0', 13, '107,110', 112, NULL, NULL, '2023-02-03', NULL, '2023-02-05', '2023-02-04', '2023-02-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411235250178', '2023C05', 'ML及JW水电工程建设征地实物指标调查配合测量', 83, '0', '0', '0227', '汪奎', '18328718961', '实物指标配合测量', '1', 13, '111,110', 112, 83, NULL, '2023-02-03', NULL, '2023-02-05', '2023-02-04', NULL, '（JW工作参见合同编码CMC1：A-23043）', NULL, NULL, NULL, NULL, NULL, NULL, '204,82', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411252027394', '2023C04', '南江县抽水蓄能电站预可阶段地形图测绘', 32, '0', '0', '0231', '龙宇杰、王峰', '15198088143、13880713756', '地形图测绘', '0', 13, '107', 112, NULL, NULL, '2023-02-03', NULL, '2023-02-05', '2023-02-04', '2023-02-13', NULL, NULL, NULL, '106.99278569', '32.22095807', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411268804610', '2023W07', '四川省雅砻江两河口水电站工程测量中心服务（2023年）', 122, '0', '1', '0201', '钱俊锦', NULL, '工程测量中心', '0', 22, '201', 112, 122, NULL, '2023-02-02', NULL, '2023-02-05', '2023-01-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411281387521', '2023W06', '四川大渡河双江口水电站枢纽工程测量中心服务（2023年）', 120, '0', '1', '0159', '李锋', NULL, '工程测量中心', '0', 22, '202', 112, 120, NULL, '2023-02-02', NULL, '2023-02-05', '2023-01-01', '2023-12-31', '四川大渡河双江口水电站枢纽工程测绘技术服务合同', NULL, NULL, NULL, NULL, NULL, NULL, '56,62', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411298164738', '2023W05', '四川省脚木足河巴拉水电站工程测量中心技术服务(2023年)', 120, '0', '1', '0186', NULL, NULL, '工程测量中心', '0', 22, '204', 112, 120, NULL, '2023-02-02', NULL, '2023-02-05', '2023-01-01', '2023-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '70', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411319136258', '2023W04', '雅砻江桐子林水电站大坝外部变形和近坝区滑坡体观测（2023年）', 102, '0', '1', '0202', '高翠峰', '0812-3331998', '工程监测', '0', 22, '112', 112, 102, NULL, '2023-02-02', NULL, '2023-02-05', '2023-01-01', '2023-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411331719170', '2023W03', '雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测（2023年）', 102, '0', '1', '0200', '高翠峰', NULL, '工程监测', '0', 22, '112', 112, 102, NULL, '2023-02-02', NULL, '2023-02-05', '2023-01-01', '2023-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '155', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411348496386', '2023W09', '国能四川阿水电力开发有限公司绰斯甲水电站工程测量中心技术服务（2023年）', 121, '0', '1', '0083', '刘胜', '17780674912、028-85935753', '工程测量中心', '0', 22, '203', 112, 121, NULL, '2023-02-02', NULL, '2023-02-05', '2023-01-01', '2023-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '54', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411373662209', '2023W02', '雅砻江桐子林水电站水库泥沙断面测量（2023年）', 61, '0', '1', '0202', '高翠峰', '0812-3331998', '泥沙监测', '0', 22, '110', 112, 61, NULL, '2023-02-02', NULL, '2023-02-05', '2023-02-03', '2023-02-18', NULL, NULL, NULL, NULL, NULL, '3', '135', '10,133,20,84,75,83,75', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411419799553', '2023W08', '大渡河金川水电站工程测量中心劳务配合（2023年）', 121, '0', '1', '0242', '杨木子', '15274878801', '工程测量中心', '0', 22, '203', 112, 121, NULL, '2023-02-02', NULL, '2023-02-05', '2022-01-01', '2023-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '98', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411457548290', '2023C02', '江油抽水蓄能电站可研阶段工程区地形图测绘', 71, '0', '0', '0231', '龙宇杰、魏星灿', '15198088143、13982136765', '地形图测绘', '0', 13, '107,110', 112, 71, NULL, '2023-02-01', NULL, '2023-02-01', '2023-02-04', '2023-02-28', NULL, NULL, NULL, NULL, NULL, '6', '131', '108,6,117,118,153,125,155,64,92', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491329', '2023W01', '南充市高坪区白塔街道景秀东方崩塌等30处地质灾害隐患点防治工程', 116, '0', '1', '0118', '李春生', NULL, '勘察', '0', 22, '113', 20, NULL, NULL, '2023-01-13', NULL, '2023-01-13', '2022-11-23', '2022-11-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491330', '2023C99', '两河口水电站库区6座复建桥梁桥址河道断面形态以及桥墩、桥台的形态测量', 71, '0', '0', '0231', '龙宇杰、蒋陶', '15198088143、13568827702', '断面', '0', 13, '110', 112, 71, NULL, '2023-12-13', NULL, '2023-12-13', '2023-12-08', '2023-12-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491331', '2023C98', '藏东南（玉察）水风光一体化基地八宿2、3号光伏地形图测绘', 15, '0', '0', '0238', '王雅雯', '15008405727', '地形图测绘', '0', 22, '107,115,110', 112, 72, NULL, '2023-12-11', NULL, '2023-12-11', '2023-12-23', '2023-12-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491332', '2023C97', '西藏江达鲁格一期120万kW光伏项目场址地形图测绘及初步工程地质勘察技术服务工作', 84, '0', '0', '0184', '辛国平', '15108300297', '地形图测绘', '0', 20, '111,107', 112, 97, NULL, '2023-12-07', NULL, '2023-12-07', '2023-12-09', '2023-12-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '149,140,200,220,176', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491333', '2023C96', '藏东南（玉察）水风光一体化基地八宿12号光伏地形图测绘（Ⅰ标段测绘）', 60, '0', '0', '0238', '王雅雯', '15008405727', '地形图测绘', '0', 22, '107,110', 112, 72, NULL, '2023-12-05', NULL, '2023-12-06', '2023-12-05', '2024-01-08', '本项目工期较为紧张', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491334', '2023C95', '藏东南（玉察）水风光一体化基地八宿8号光伏地形图测绘', 60, '0', '0', '0238', '王雅雯', '15008405727', '地形图测绘', '0', 13, '107,110', 112, 72, NULL, '2023-12-03', NULL, '2023-12-05', '2023-12-05', '2024-01-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491335', '2023C94', 'JW梯级电站可研阶段地形图测绘', 83, '0', '0', '0231', '龙宇杰、李辉', '15198088143、13880707006', '地形图测绘', '0', 13, '111,107', 112, 83, NULL, '2023-12-01', NULL, '2023-12-01', '2023-12-24', NULL, '该项目与2023C83合并，各项完成时间为预估工期，具体提交时间可根据现场实际情况与用户专业沟通。', NULL, NULL, NULL, NULL, NULL, NULL, '97,157,147,149,222', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491336', '2023C93', '新龙抽水蓄能电站地形图测绘（新站址）', 60, '0', '0', '0231', '龙宇杰、姚鹏程', '15198088143、13882264571', '地形图测绘', '0', 13, '110', 112, 61, NULL, '2023-11-24', NULL, '2023-11-27', '2023-11-28', '2023-12-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491337', '2023C92', 'ABH项目预可阶段测绘技术服务', 46, '0', '0', '0226', '李熙渔', '19102664650', '矢量化地形图', '0', 22, '109', 112, NULL, NULL, '2023-11-15', NULL, '2023-11-16', '2023-12-18', '2023-12-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491338', '2023C91', '西藏那曲查龙抽水泵站测绘工作', 109, '0', '0', '0231', '龙宇杰、程保根', '15198088143、13880736102', '地形图测绘', '0', 13, '112', 112, 109, NULL, '2023-11-10', NULL, '2023-11-10', '2023-11-11', '2023-11-20', '已请项目经理与电厂沟通搜集控制成果事宜。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491339', '2023C90', '牙根二级水电站集镇新址、泥石流沟、取水线路地形图测绘', 61, '0', '0', '0227', '干尚伟、罗天佑', '13980874941、18382173362', '地形图测绘', '0', 20, '107,110', 112, 61, NULL, '2023-11-10', NULL, '2023-11-10', '2023-11-15', '2023-12-15', '坐标高程系统与主体工程一致', NULL, NULL, NULL, NULL, '6', '137', '117', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491340', '2023C89', '雅下多雄拉隧洞部位控制点复核工作', 83, '0', '0', '0229', '杨强', '15208180218', '控制测量', '0', 13, '111', 112, 83, NULL, '2023-11-06', NULL, '2023-11-06', '2023-11-07', '2023-11-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491341', '2023C88', '大邑抽水蓄能水电站可研阶段地形图测绘', 60, '0', '0', '0231', '龙宇杰、朱先文', '15198088143、13882266601', '地形图测绘', '0', 13, '110', 112, 66, NULL, '2023-11-03', NULL, '2023-11-03', '2023-11-07', '2023-11-24', NULL, NULL, NULL, NULL, NULL, '2', '147', '155,158,199,11,114', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491342', '2023C87', '中核汇能昭觉县264MW风电项目、宁南县49MW风电项目', 84, '0', '0', '0238', '陈璇', '17716467265', '地形图测绘', '0', 22, '111,107', 112, 94, NULL, '2023-11-02', NULL, '2023-11-02', '2023-11-05', '2023-11-22', '先实施昭觉，后实施宁南。', NULL, NULL, NULL, NULL, '4', '136', '107,109,98,100,106,157,193,156,63', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491343', '2023C86', '叶巴滩水电站连接道路硬化改建工程1:2000地形图测绘', 71, '0', '0', '0227', '王增福', '13281233292', '地形图测绘', '0', 20, '110', 112, 71, NULL, '2023-11-02', NULL, '2023-11-02', '2023-11-03', '2023-11-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491344', '2023C85', '南充蓬安抽水蓄能电站预可阶段地形图测绘项目', NULL, '0', '0', '0231', '龙宇杰、罗贞华', '15198088143、13908184809', '地形图测绘', '0', 13, NULL, NULL, NULL, NULL, '2023-11-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491345', '2023C84', '广安岳池抽水蓄能电站预可阶段地形图测绘项目', NULL, '0', '0', '0231', '龙宇杰、罗贞华', '15198088143、13908184809', '地形图测绘', '0', 13, NULL, NULL, NULL, NULL, '2023-11-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '139,145', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491346', '2023C83', 'YJ电站施工图阶段1:500地形图补测工作', 83, '0', '0', '0231', '杜洪亮', '15828008397', '地形图测绘', '0', 13, '111,107', 112, 83, NULL, '2023-10-18', NULL, '2023-10-19', '2023-10-30', '2023-11-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491347', '2023C82', '叙州区抽水蓄能电站1:2000地形图测绘', 84, '0', '0', '0231', '龙宇杰', '15198088143', '地形图测绘', '0', 13, '111,107,115', 112, 94, NULL, '2023-10-10', NULL, '2023-10-11', '2023-10-11', '2023-11-01', NULL, NULL, NULL, NULL, NULL, NULL, '147', '108,98', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491348', '2023C81', '甘孜州乡城县100万千瓦光伏项目1:1000地形图测绘', 32, '0', '0', '0238', '陈璇', '17716467265', '地形图测绘', '0', 13, '111,107', 112, 33, NULL, '2023-10-07', NULL, '2023-10-07', '2023-10-06', '2023-10-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '74,73,199,98,155', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491349', '2023C80', '安徽西形冲抽水蓄能电站可研阶段地形图测绘项目', 83, '0', '0', '0231', '龙宇杰、闫勇、陈子海', '15198088143、13880937699、18980568555', '地形图测绘', '0', 13, '111,107,115', 112, 95, NULL, '2023-09-26', NULL, '2023-09-27', '2023-09-28', '2023-11-07', NULL, NULL, NULL, NULL, NULL, '6', '137', '200,213,144,146,76,72,75,78,158,11', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491350', '2023C79', '雅江抽水蓄能电站（茈卡村）地形图测绘', 61, '0', '0', '0231', '龙宇杰', '15198088143', '地形图测绘', '0', 13, '107,110', 112, 61, NULL, '2023-09-25', NULL, '2023-09-26', '2023-10-08', '2023-10-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '4,100,98,109,172', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491351', '2023C78', '双江口混合式抽水蓄能电站地形图测绘', 84, '0', '0', '0231', '龙宇杰、袁国庆', '15198088143、13541072590', '地形图测绘', '0', 20, '111,107', 112, 95, NULL, '2023-09-13', NULL, '2023-09-14', '2023-09-21', '2023-09-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '9,106,92,144,100', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491352', '2023C76', '牙根二级水电站1:2000地形地类图测绘', 61, '0', '0', '0231', '龙宇杰、任帅、干尚伟', '15198088143、19113524320、13980874941', '地形图测绘', '0', 20, '107,110', 112, 95, NULL, '2023-09-08', NULL, '2023-09-08', '2023-09-09', '2023-09-15', '提供两套坐标成果，2000坐标和雅砻江工程坐标系', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491353', '2023C75', '金沙江波罗水电站集镇新址国省干道占地范围公路配合测量', 63, '0', '0', '0227', '苟艾劼', '13618048754', '公路测量', '0', 20, '110', 112, 63, NULL, '2023-09-06', NULL, '2023-09-06', '2023-09-08', '2023-09-28', NULL, NULL, NULL, NULL, NULL, '3', '135', '109,11,2', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491354', '2023C74', '攀枝花市仁和区南部一期280MW光伏项目1:500地形图测绘', 84, '0', '0', '0238', '王雅雯', '15008405727', '地形图测绘', '0', 13, '111,107', 112, 94, NULL, '2023-09-05', NULL, '2023-09-05', '2023-09-20', '2023-10-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '147,156,143,31', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491355', '2023C73', '雅江抽水蓄能电站规划阶段地形图测量', 61, '0', '0', '0231', '龙宇杰、黄晨', '15198088143、13882264807', '地形图测绘', '0', 13, '107,110', 112, 61, NULL, '2023-08-30', NULL, '2023-08-30', '2023-09-01', '2023-09-09', NULL, NULL, NULL, NULL, NULL, '2', '16', '134,65,75,199,144,146,157,106,20', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491356', '2023C72', '江油抽水蓄能电站界桩测设工作', 61, '0', '0', '0227', '冯春', '13981823592', '界桩测设', '0', 20, '110', 112, 74, NULL, '2023-08-28', NULL, '2023-08-28', '2023-08-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '109,11,98,4', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491357', '2023C71', '道孚抽水蓄能电站地形图补充任务', 84, '0', '0', '0231', '龙宇杰、王党在', '15198088143、13438003675', '地形图测绘', '0', 20, '111', 112, NULL, NULL, '2023-08-28', NULL, '2023-08-28', '2023-08-28', '2023-08-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491358', '2023C70', '双江口水电站双柏树实物指标配合测量', 33, '0', '0', '0227', '陈爽、王荣方', '17340088515、18980377169', '实物指标配合调查', '0', 20, '107', 112, 33, NULL, '2023-08-28', NULL, '2023-08-28', '2023-08-23', '2023-09-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491359', '2023C69', '金沙江岗托水电站地形图测绘', 71, '0', '0', '0231', '龙宇杰、马宏', '15198088143、13882264834', '地形图测绘', '0', 20, '107,110', 112, 71, NULL, '2023-08-17', NULL, '2023-08-18', '2023-08-27', '2023-11-03', '2000国家大地坐标，1985国家高程基准。尽快开展工作，完成时间与用户协商。', NULL, NULL, NULL, NULL, '2', '16', '47,82,83,84,100,172,145,12', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491360', '2023C68', '牙根二级水电站米龙乡米龙村集镇新址1:2000地形地类图测绘', 84, '0', '0', '0227', '干尚伟', '13980874941', '地形图测绘', '0', 20, '111', 112, 122, NULL, '2023-08-17', NULL, '2023-08-17', '2023-08-22', '2023-08-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491361', '2023C67', '金沙江上游清洁能源基地叶巴滩抽水蓄能电站测绘工作（NZK21254–CH-2023-01）', 84, '0', '0', '0231', '龙宇杰、邱玄', '15198088143、18884843142', '地形图测绘', '0', 13, '111,107', 112, NULL, NULL, '2023-08-10', NULL, '2023-08-11', '2023-08-18', '2023-08-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491362', '2023C66', '硬梁包水电站库区实物指标配合测量', 83, '0', '0', '0227', '余波', '15828476600', '实物指标配合调查', '0', 20, '111', 112, NULL, NULL, '2023-08-10', NULL, '2023-08-11', '2023-08-14', '2023-09-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '159,154', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491363', '2023C65', '新龙抽水蓄能电站规划加深阶段地形图测绘', 32, '0', '0', '0231', '龙宇杰、罗贞华', '15198088143、13908184809', '地形图测绘', '0', 13, '107,110', 112, 35, NULL, '2023-08-07', NULL, '2023-08-08', '2023-08-20', '2023-08-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491364', '2023C64', '理塘抽水蓄能新站址规划加深阶段测绘工作', 32, '0', '0', '0231', '龙宇杰、', '15198088143', '地形图测绘', '0', 13, '107,110', 112, 35, NULL, '2023-08-07', NULL, '2023-08-08', '2023-08-10', '2023-08-17', NULL, NULL, NULL, NULL, NULL, '4', '136', '98,106,109,6,176', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491365', '2023C63', '波罗水电站补充地形地类图测绘', 71, '0', '0', '0227', '郑萍伟、王增福', '13882289003、13281233292', '地形图测绘', '0', 20, '110', 112, 71, NULL, '2023-08-03', NULL, '2023-08-14', '2023-08-20', '2023-09-03', NULL, NULL, NULL, NULL, NULL, '5', '130', '96,140,207,97,34,101,153,151,163', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491366', '2023C62', '铜街子水电站坝后段及渣场1:500地形图测绘', 61, '0', '0', '0231', '龙宇杰、王若然', '15198088143、18608045211', '地形图测绘', '0', 20, '110', 59, NULL, NULL, '2023-08-01', NULL, '2023-08-01', '2023-08-02', '2023-08-04', NULL, NULL, NULL, NULL, NULL, '5', '130', '106,168,20,63', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491367', '2023C61', '吉牛水电站呷业沟地形图测绘', 71, '0', '0', '0231', '龙宇杰、蒲建平', '15198088143、13981811362', '地形图测绘', '0', 20, '110', 112, 71, NULL, '2023-07-26', NULL, '2023-07-26', '2023-08-01', '2023-08-04', NULL, NULL, NULL, NULL, NULL, '4', '136', '113,127,6,166,108', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491368', '2023C60', '大渡河流域扩机电站坐标转换', 71, '0', '0', '0231', '龙宇杰、程德华', '15198088143、13551343689', '坐标转换', '0', 20, '110', 112, 71, NULL, '2023-07-14', NULL, '2023-07-14', '2023-07-19', '2023-07-24', NULL, NULL, NULL, NULL, NULL, '6', '137', '106,62', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491369', '2023C59', '老沟水库库容曲线测量', 61, '0', '0', '0228', '王进春', '18980568685', '地形图测绘', '0', 13, '110', 112, 61, NULL, '2023-07-04', NULL, '2023-07-04', '2023-07-04', '2023-07-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491370', '2023C58', '溪洛渡水电站雷波县元宝乡跑马坪村配合测量', 71, '0', '0', '0227', '黄小强', '13438892085', '实物指标配合测量', '0', 20, '110', 112, 71, NULL, '2023-07-03', NULL, '2023-07-03', '2023-07-02', '2023-07-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491371', '2023C57', '官地水电站地形图测绘', 33, '0', '0', '0231', '龙宇杰、杨寿成', '15198088143、13308066147', '地形图测绘', '0', 13, '107', 112, 33, NULL, '2023-06-30', NULL, '2023-06-30', '2023-07-08', '2023-07-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491372', '2023C56', '长河坝水电站汤坝居民点和土地复垦外部引水工程地形地类图测绘', 33, '0', '0', '0227', '张波', '13708019335', '地形图测绘', '0', 20, '107', 112, NULL, NULL, '2023-06-29', NULL, '2023-06-30', '2023-07-10', '2023-07-13', NULL, NULL, NULL, NULL, NULL, '5', '130', '109,220,221,223,9,110', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491373', '2023C55', '泸定水电站坝流场数值模拟1:500地形图测绘', 145, '0', '0', '0231', '龙宇杰、张宏伟', '15198088143、18328530017', '地形图测绘', '0', 13, '115', 112, 145, NULL, '2023-06-25', NULL, '2023-06-25', '2023-06-25', '2023-06-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '98,68', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491374', '2023C54', '国能大渡河汉源永利坪光伏电站项目1:500地形图测绘', 61, '0', '0', '0184', '新能源高志东', '15008214556', '地形图测绘', '0', 20, '107,110', 112, 71, NULL, '2023-06-20', NULL, '2023-06-21', '2023-06-22', '2023-06-29', NULL, NULL, NULL, NULL, NULL, '6', '131', '62,66,61,142,213,10', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491375', '2023C53', '岷江干流张坎航电枢纽工程排涝区域1:2000地形图测绘', 61, '0', '0', '0231', '龙宇杰、裴广超', '15198088143、13982062116', '地形图测绘', '0', 20, '107,110', 112, 61, NULL, '2023-06-19', NULL, '2023-06-20', '2023-06-29', '2024-03-27', NULL, NULL, NULL, NULL, NULL, '5', '130', '108,11,110', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491376', '2023C52', '老木孔航电枢纽工程排涝区域1:2000地形图测绘', 61, '0', '0', '0231', '龙宇杰、石太军', '15198088143、13980519026', '地形图测绘', '0', 20, '107,110', 112, 61, NULL, '2023-06-19', NULL, '2023-06-20', '2023-07-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491377', '2023C51', '引雅入盐综合利用项目水利部分预可阶段测绘工作', 32, '0', '0', '0231', '龙宇杰、刘刚', '15198088143、13698760752', '地籍测绘', '0', 13, '107', 112, 33, NULL, '2023-06-05', NULL, '2023-06-05', '2023-05-25', NULL, NULL, NULL, NULL, NULL, NULL, '2', '132', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491378', '2023C50', '牙根二级水电站日岗沟地形图补测', 84, '0', '0', '0231', '龙宇杰、张超', '15198088143、15008288972', '地形图测绘', '0', 20, '111', 112, NULL, NULL, '2023-06-05', NULL, '2023-06-05', '2023-06-05', '2023-06-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491379', '2023C49', '甘孜抽水蓄能水电站地形图测绘', 61, '0', '0', '0231', '龙宇杰、刘斌、袁毅峰', '15198088143、17380461677、13880419763', '地形图测绘', '0', 20, '107,110', 112, 72, NULL, '2023-06-05', NULL, '2023-06-05', '2023-06-11', '2023-06-18', NULL, NULL, NULL, NULL, NULL, '4', '136', '101,106,61,6,92', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491380', '2023C48', '双江口水电站双柏树安置点1:500地形图测绘及放点配合测量', 121, '0', '0', '0227', '陈爽', '17340088515', '地形图测绘', '0', 20, '111,203', 112, 121, NULL, '2023-06-01', NULL, '2023-06-01', '2023-06-02', '2023-06-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491381', '2023C47', '绵竹抽水蓄能电站界桩测设工作', 61, '0', '0', '0227', '冯春', '13981823592', '界桩测设', '0', 20, '110', 112, 72, NULL, '2023-07-14', NULL, '2023-07-14', '2023-07-18', '2023-09-02', NULL, NULL, NULL, NULL, NULL, '2', '147', '62,11,85,70', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491382', '2023C46', '盐源抽蓄电站地形图测绘', 32, '0', '0', '0231', '龙宇杰、杨寿成', '15198088143、13308066147', '地形图测绘', '0', 13, '107,115,110', 112, 145, NULL, '2023-05-22', NULL, '2023-05-22', '2023-05-23', '2023-07-25', NULL, NULL, NULL, NULL, NULL, '3', '135', '11,10,206,12', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491383', '2023C45', '川藏铁路泸定段征地拆迁安置规划设计项目1:500地形图测绘', 145, '0', '0', '0227', '李宗锴', '18081555510', '地形图测绘', '0', 20, '115', 112, 145, NULL, '2023-05-19', NULL, '2023-05-19', '2023-05-21', '2022-05-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '100', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491384', '2023C44', '老木孔水电站库区道路边沟坐标高程测量', 84, '0', '0', '0227', '陈爽', '17340088515', '坐标高程测量', '0', 20, '111', 112, NULL, NULL, '2023-05-15', NULL, '2023-05-16', '2023-05-18', '2023-06-01', NULL, NULL, NULL, NULL, NULL, '2', '16', '159,100,11,106,98', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491385', '2023C43', '两河口混合式抽水蓄能电站下库河段断面测量', 61, '0', '0', '0231', '龙宇杰、颜志衡', '15198088143、13688470409', '断面', '0', 20, '110', 112, 61, NULL, '2023-05-05', NULL, '2023-05-05', '2023-04-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491386', '2023C42', '林芝市巴宜区62个行政村“多规合一”实用性村庄测量', 144, '0', '0', '0237', '张丽波、姚利平', '13438319294、15883628192', '地形图测绘', '0', 20, '115', 112, 144, NULL, '2023-05-05', NULL, '2023-05-05', '2023-05-10', '2023-11-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '77', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491387', '2023C41', 'ML库区点位配合测量（配合基础设施分公司）', 83, '0', '0', '0229', '杨锐', '15208223387', '公路测量', '0', 20, '111', 112, NULL, NULL, '2023-05-04', NULL, '2023-05-04', '2023-04-25', '2023-05-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '12', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411499491388', '2023C40', '金阳施控网成果复核', 145, '0', '0', '0231', '索慧敏', '13541288859', '施工测量控制网', '0', 13, '115', 112, 145, NULL, '2023-04-26', NULL, '2023-04-26', '2023-04-28', '2023-05-07', NULL, NULL, NULL, NULL, NULL, '3', '135', '72,78,83,77,31,98', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411533045762', '2023C01', '绵竹抽水蓄能电站工程区可研阶段地形图测绘', 71, '0', '0', '0231', '龙宇杰', '15198088143', '地形图测绘', '0', 13, '107,110', 20, 71, NULL, '2023-01-12', NULL, '2023-01-13', '2023-02-02', '2023-02-16', NULL, NULL, NULL, NULL, NULL, '3', '135', '9', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411562405890', '2022C88', '崇州抽蓄电站预可阶段测绘工作', 149, '0', '0', '0231', '龙宇杰', '15198088143', '地形图测绘', '0', 13, '116', 20, 149, NULL, '2022-12-28', NULL, '2022-12-29', '2022-12-29', '2023-02-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '177,100', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411587571714', '2022C86', '双滩抽蓄电站测绘工作', 144, '0', '0', '0231', '龙宇杰', '15198088143', '地形图测绘', '0', 13, '115', 11, 144, NULL, '2022-12-26', NULL, '2022-12-26', '2022-12-27', '2023-01-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '151,157,46,47,48,45,12,199', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411612737537', '2022C87', '绵竹抽水蓄能电站地形图补充测绘（砾岩料场）', 144, '0', '0', '0231', '龙宇杰', '15198088143', '地形图测绘', '0', 13, '115', 11, 144, NULL, '2022-12-26', NULL, '2022-12-26', '2022-12-27', '2022-12-28', NULL, NULL, NULL, NULL, NULL, '3', '135', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411633709057', '2022W46', '重庆道路建模项目道路模型制作', 39, '1', '1', '0019', NULL, NULL, '三维模型及视频制作', '0', 13, '108', 11, 39, NULL, '2022-12-21', NULL, '2022-12-21', '2022-11-08', '2022-11-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411650486273', '2022W45', '国网西藏拉萨发电公司羊湖电站压力钢管永久变形监测沉降水准工作基点改造施工合同', 101, '1', '1', '0085', '马如坤、汪吉德', '18689045539', '其它测绘项目', '0', 22, '112', 11, 109, NULL, '2022-12-19', NULL, '2022-12-20', '2023-02-06', '2023-04-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411667263489', '2022W44', '国投玛纳斯10万千瓦40万千瓦时储能配套40万千瓦光伏市场化并网发电项目施工图阶段勘察', NULL, '0', '1', '0243', '王吉高', '13511013785', '勘察', '0', 13, '113', 11, 118, NULL, '2022-12-19', NULL, '2022-12-20', '2022-12-22', '2022-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411688235010', '2022W42', '泸县2021年耕地“进出平衡”目标考核整改专项工作', 59, '0', '1', '0111', '张亮', '13982406421', '国土变更调查', '0', 13, '106', 59, 59, NULL, '2022-12-15', NULL, '2022-12-15', '2022-06-25', '2022-08-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411705012226', '2022W43', '泸县2022年度国土变更调查及日常变更', 59, '0', '1', '0111', '张亮', '13982406421', '国土变更调查', '0', 13, '106', 20, 59, NULL, '2022-12-15', NULL, '2022-12-16', '2022-12-19', '2023-05-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411730178050', '2022C85', '金沙江上游清洁能源基地叶巴滩抽水蓄能电站地形图测绘', 15, '0', '0', '0231', '龙宇杰、卢莹', '15198088143、13578970491', '地形图测绘', '0', 13, '115', 20, 145, NULL, '2022-12-06', NULL, '2022-12-07', '2022-12-07', '2023-05-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '61,186,168,61,168,16', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411751149569', '2022C84', '波罗水电站地形图补测', 15, '0', '0', '0231', '龙宇杰、陈长江', '15198088143、13880616099', '地形图测绘', '0', 13, '115', 20, 145, NULL, '2022-12-06', NULL, '2022-12-07', '2022-12-15', '2023-01-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '84,83,45', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411772121090', '2022C83', '道孚抽水蓄能水电站可研阶段地形图测绘', 94, '0', '0', '0231', '龙宇杰、王党在', '15198088143、13438003675', '地形图测绘', '0', 13, '111,107,110', 20, 94, NULL, '2022-12-06', NULL, '2022-12-07', '2021-12-28', '2023-01-13', NULL, NULL, NULL, '101.3043496', '30.50004473', '4', '136', '86,88,87,11,69,68,155,154,152,108', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411788898305', '2022W47', '（简阳）平泉街道新桥村储备土地2016-70号地块砂石资源量估算服务', NULL, '0', '1', '0094', '吴斌', '13684148159', '工程测量及勘察技术服务', '0', 22, '113', 20, NULL, NULL, '2022-12-05', NULL, '2023-02-02', '2022-12-10', '2022-12-16', '勘察事业部', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411788898306', '2022W48', '南坪片区排水管网补勘补测项目内窥检测劳务外协合同', 138, '0', '1', '0275', '刘洋', NULL, '地下管线', '0', 22, '114', 112, 138, NULL, '2023-08-11', NULL, '2023-08-11', '2021-07-20', '2021-09-28', '本项目甲方已经于2022年2月安排工作，目前工作已经完成。补登记项目信息。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411788898307', '2022W49', '水土新城排水管网精细化普查项目内窥检测劳务外协合同', 138, '0', '1', '0275', '刘洋', NULL, '地下管线', '0', 22, '114', 112, 138, NULL, '2023-08-11', NULL, '2023-08-11', '2021-11-20', '2022-04-27', '本项目甲方已经于2022年2月安排工作，目前已经完成。补登记项目信息。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411809869825', '2022C82', 'HT项目地形图测绘', 35, '0', '0', '0231', '龙宇杰、幸享林', '15198088143、13808237413', '地形图测绘', '0', 13, '107', 11, 35, NULL, '2022-12-05', NULL, '2022-12-05', '2022-12-05', '2022-12-22', NULL, NULL, NULL, '79.76612524124042', '36.88788726387042', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411826647041', '2022C81', '宜宾蟠龙抽水蓄能电站地形图测绘', 33, '0', '0', '0231', '龙宇杰、索慧敏', '15198088143、13541288859', '地形图测绘', '0', 13, '107,110', 11, 33, NULL, '2022-12-02', NULL, '2022-12-05', '2022-12-10', '2022-12-16', NULL, NULL, NULL, '104.27699089', '28.46865357', '7', '133', '198,149,109,76,16,66,64', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411847618561', '2022C80', '猴子岩外部供水及料场地形图测绘', 72, '1', '0', '0227', '李治安', '18295010497', '地形图测绘', '0', 13, '111,107,110', 20, 72, NULL, '2022-11-28', NULL, '2022-11-28', '2022-11-29', '2022-12-09', '以kml要求为准并需与用户确认。对岸用船可请用户方协调。', NULL, NULL, '101.96856164657676', '30.78723394935855', '2', '16', '108,7,158,163,61,4', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411868590081', '2022W41', '中电工程安徽贵池区（秋江）100MW渔光互补光伏电站项目', 144, '0', '1', '0243', '崔后发', '13955941115', '工程测量及勘察技术服务', '0', 23, '115,113', 11, 144, NULL, '2022-11-16', NULL, '2022-11-17', '2022-11-21', '2022-12-16', NULL, NULL, NULL, NULL, NULL, '5', '130', '87,139,165,109,153,10', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411885367297', '2022C79', '泸州市龙马潭区金龙胡市片区现代农业产业园区1:2000地形图测绘', 71, '0', '0', '0227', '陈姝嫱', '13666133779', '地形图测绘', '0', 22, '111,110', 11, 71, NULL, '2022-11-16', NULL, '2022-12-05', '2022-12-08', '2023-01-16', NULL, NULL, NULL, NULL, NULL, NULL, '16', '145,86', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411906338818', '2022W40', '简阳市放生坝片区砂石储量调查项目工程地质勘察', NULL, '0', '1', '0094', '吴斌', '13684148159', '工程测量及勘察技术服务', '0', 13, '113', 11, 116, NULL, '2022-11-11', NULL, '2022-11-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1', '16', '86,112', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411927310338', '2022C78', '牙根二级水电站坝下产卵场地形图测绘', 145, '0', '0', '0231', '龙宇杰、张耀丹', '15198088143、13281170660', '地形图测绘', '0', 13, '115', 20, 145, NULL, '2022-11-10', NULL, '2022-11-17', '2022-11-26', '2022-12-05', '2000国家大地坐标系、1985国家高程基准', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411944087553', '2022C77', '孟底沟水电站尼呷2#承包商营地及施工场地1:500地形图测绘', 15, '0', '0', '0231', '龙宇杰、梅稚平', '15198088143、15881001826', '地形图测绘', '0', 13, '115', 20, 145, NULL, '2022-11-10', NULL, '2022-11-21', '2022-11-24', '2022-12-03', NULL, NULL, NULL, NULL, NULL, '4', '136', '176,86,106', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411965059074', '2022C76', '芦山县市政公园恢复及重建工程项目地形图测绘', 94, '0', '0', '0227', '罗胴', '19136075079', '地形图测绘', '0', 13, '111,107,110', 20, 94, NULL, '2022-11-09', NULL, '2022-11-09', '2022-11-16', '2022-11-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '168,35,152,110', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881411986030594', '2022W39', '海南全岛地形变化较大区域、漏洞区域机载LIDAR数据获取技术服务项目', 32, '0', '1', '0282', '林韬', '13807560499', '激光扫描', '0', 13, '107', 20, 34, NULL, '2022-11-02', NULL, '2022-11-03', '2022-10-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '66,98', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412002807809', '2022C75', '大渡河长河坝抽水蓄能预可阶段测绘', 72, '1', '0', '0231', '龙宇杰、刘永波', '15198088143、13438137962', '地形图测绘', '0', 13, '111,107,110', 20, 72, NULL, '2022-11-01', NULL, '2022-11-01', '2022-11-04', '2022-11-18', NULL, 'uploadkmlFiles\\南涧-云县pos点位.kml', 'uploadkmlFiles\\南涧-云县线路急成图范围2020年.kml', NULL, NULL, '6', '136', '68,200,86,88,87,7,34,100', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412023779329', '2022C74', '岗托水电站勘探放样', 144, '0', '0', '0231', '龙宇杰', '15198088143', '其它测绘项目', '0', 13, '115', 20, 144, NULL, '2022-10-27', NULL, '2022-10-28', '2022-10-31', '2022-11-03', NULL, NULL, NULL, NULL, NULL, '2', '132', '99', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412040556545', '2022W38', '仪陇县林权数据整合建库采购项目政府采购合同', 81, '0', '1', '0210', '李先生', '0817-7217951', '林权数据整合', '0', 23, '106', 11, 81, NULL, '2022-10-26', NULL, '2022-10-26', '2022-11-03', '2023-01-13', NULL, NULL, NULL, NULL, NULL, '1', '16', '159', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412057333761', '2022W37', '蓬安县林权类不动产登记数据整合项目政府采购合同（服务类）', NULL, '0', '1', '0125', '周先生', '13659082930', '林权数据整合', '0', 23, '108', 20, NULL, NULL, '2022-10-25', NULL, '2022-10-25', '2022-11-04', '2023-01-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412074110977', '2022C73', '广东省云浮市云安区都杨镇牛栏坑绿色建材项目测绘工作', 94, '0', '0', '0231', '赵利勤', '18116570487', '地形图测绘', '0', 13, '111,107,115', 20, 94, NULL, '2022-10-21', NULL, '2022-10-21', '2022-10-27', '2022-11-04', NULL, NULL, NULL, '112.2635596149959', '23.09341831259949', NULL, NULL, '100,108,147,152,172', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412090888194', '2022W36', '国网西藏那曲供电公司查龙水电站2021年度监测资料整编、分析项目技术服务合同', 101, '1', '1', '0086', '班登珠扎', '13659529621', '其它测绘项目', '0', 13, '112,109', 20, 57, NULL, '2022-10-18', NULL, '2022-10-18', '2022-12-05', '2023-04-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412107665410', '2022W35', '四川大渡河双江口水电站枢纽工程施工测量控制网复测（2022年度）', 120, '0', '1', '0159', '李锋', NULL, '施工测量控制网', '1', 22, '202', 20, 120, NULL, '2022-10-14', NULL, '2022-10-18', '2022-11-01', '2022-12-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412124442625', '2022C72', '石棉县新民集镇震损变形应急监测土建及观测', 61, '0', '0', '0227', '王勇', '15928683672', '工程监测', '0', 13, '111', 20, 61, NULL, '2022-10-13', NULL, '2022-10-13', '2022-10-14', '2022-10-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '110,101,66,107,193,194,201,120,4,198', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412141219841', '2022C71', '双江口水电站产卵场地形地类图测绘', 144, '0', '0', '0231', '龙宇杰、李联希', '15198088143、13980740462', '地形图测绘', '0', 13, '115', 20, 144, NULL, '2022-10-11', NULL, '2022-10-12', '2022-11-14', '2022-11-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '69,73,84,10,108,165,47', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412153802753', '2022C70', '广东台山黄茅岗抽水蓄能电站工程区1:1000地形图测绘', 83, '0', '0', '0231', '龙宇杰、杨海红', '15198088143、15881116027', '地形图测绘', '0', 13, '111,110', 20, 83, NULL, '2022-10-11', NULL, '2022-10-11', '2022-10-06', '2022-10-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412170579969', '2022W34', '大唐观音岩水电站2022年度变形监测控制网复测及坝前淤积和坝后冲刷测量项目', 102, '0', '1', '0039', NULL, '19908020388', '变形监测控制网及地形测量', '0', 13, '112,110', 20, 101, NULL, '2022-10-08', NULL, '2022-10-10', '2022-11-06', '2022-12-10', NULL, NULL, NULL, NULL, NULL, '3', '135', '10,161,133,65,83,123,64,105', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412187357185', '2022C69', '永丰抽水蓄能电站预可阶段地形图测绘', NULL, '0', '0', '0231', '龙宇杰、黄修权', '15198088143、15108468431', '地形图测绘', '0', 13, NULL, NULL, NULL, NULL, '2022-10-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412204134402', '2022C68', '屏山抽水蓄能电站西村站址地形图测绘', 94, '0', '0', '0231', '龙宇杰、陈军', '15198088143、13683404208', '地形图测绘', '0', 13, '111,107,110', 20, 94, NULL, '2022-09-29', NULL, '2022-09-29', '2022-10-03', '2022-10-15', NULL, NULL, NULL, NULL, NULL, '2', '132', '103', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412220911618', '2022C66', '大熊猫国家公园芦山县保护管理设施项目地形图测绘', 71, '0', '0', '0227', '赖臻瑞', '13990155739', '地形图测绘', '0', 13, '111,107,110', 20, 71, NULL, '2022-09-23', NULL, '2022-09-23', '2022-09-26', '2022-10-03', '完成时间现场协商。', NULL, NULL, NULL, NULL, NULL, NULL, '177', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412237688834', '2022C67', '大熊猫国家公园芦山县配套基础设施项目地形图测绘', 71, '0', '0', '0227', '赖臻瑞', '13990155739', '地形图测绘', '0', 13, '111,107,110', 20, 71, NULL, '2022-09-23', NULL, '2022-09-23', '2022-09-26', '2022-09-28', '完成时间现场协商。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412254466049', '2022C65', '大熊猫国家公园芦山县长石坝-南天门、鹿厂河-九里岗防火道路恢复重建工程地形图测绘', 71, '0', '0', '0227', '赖臻瑞', '13990155739', '地形图测绘', '0', 13, '111,107,110', 20, 71, NULL, '2022-09-23', NULL, '2022-09-23', '2022-09-26', '2022-10-03', '9月26日进场，完成时间现场协商。', NULL, NULL, NULL, NULL, '3', '135', '68,7,4,165,88,46,88', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412271243265', '2022C64', '锦屏水电站水光互补项目地形图测绘', 142, '0', '0', '0238', '王雅雯', '15008405727', '地形图测绘', '0', 22, '116', NULL, 149, NULL, '2022-09-14', NULL, NULL, '2022-09-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412296409090', '2022C63', '山西沁水抽水蓄能电站可研阶段测绘工作', 33, '0', '0', '0231', '龙宇杰', '15198088143', '地形图测绘', '0', 13, '111,110', 10, NULL, NULL, '2022-08-31', NULL, '2022-09-01', '2022-09-15', NULL, NULL, NULL, NULL, '112.0616599586', '35.6877242291', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412313186305', '2022W32', '邻水县农村集体土地大比例尺图实测和确权登记发证项目（包二）', 59, '0', '1', '0108', NULL, NULL, '确权登记项目', '0', 22, '106', 20, 80, NULL, '2022-08-29', NULL, '2022-08-30', '2020-04-21', NULL, '本项目从2016年开始，今补登项目', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412329963522', '2022W33', '邻水县农村土地承包经营权确权登记外业调绘内业建库技术服务合同', 59, '0', '1', '0106', NULL, NULL, '确权登记项目', '0', 22, '106', 20, 80, NULL, '2022-08-29', NULL, '2022-08-29', '2015-02-16', NULL, '本项目从2016年开始，今补登项目', NULL, NULL, NULL, NULL, '6', '134', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412346740737', '2022C62', '东石岭抽水蓄能水电站地形图测绘', 83, '0', '0', '0231', '龙宇杰、陈枭', '15198088143、17882356139', '地形图测绘', '0', 13, '111,110', 20, NULL, NULL, '2022-08-15', NULL, '2022-08-15', '2022-09-17', '2022-09-11', '2000国家大地坐标系、85国家高程基准。', NULL, NULL, NULL, NULL, '5', '130', '76,77,82,176,177,133,199,99,105', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412363517954', '2022W31', '贵阳市自然资源统一确权登记项目技术协作合同', 63, '0', '1', '0075', '马亶佑', '18984846857', '确权登记项目', '0', 22, '106', 11, 63, NULL, '2022-08-08', NULL, '2022-08-08', '2022-08-10', '2022-08-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412384489473', '2022W30', '广元市自然资源局昭化区分局昭化区林权权籍补充调查服务采购项目', 113, '0', '1', '0073', '王先生', '0839-5527288', '权属调查', '0', 22, '106', 20, 113, NULL, '2022-08-02', NULL, '2022-08-02', '2022-08-11', NULL, NULL, NULL, NULL, NULL, NULL, '2', '16', '89,85,96,95,92,59', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412401266689', '2022W28', '金川党坝抽水蓄能电站地形测绘', 33, '0', '1', '0081', '张元峰', '13881397406', '地形图测绘', '0', 7, '107,110,203', 20, 121, NULL, '2022-07-26', NULL, '2022-07-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '154,155,61', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412422238210', '2022W29', '雅砻江二滩水库泥沙断面测量项目合同', 61, '0', '1', '0200', NULL, NULL, '断面泥沙测量', '0', 13, '111', 20, 61, NULL, '2022-07-26', NULL, '2022-07-27', '2022-11-14', '2023-02-20', NULL, NULL, NULL, NULL, NULL, '6', '131', '75,12,18,109,34', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412443209730', '2022W27', 'G4216线屏山新市至金阳段永善支线基础控制测量及地形图测绘项目', 95, '0', '1', '0220', '胡航', '19857026305', '地形图测绘', '0', 13, '111', 11, 95, NULL, '2022-07-25', NULL, '2022-07-25', '2022-07-27', '2022-09-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '75,140,114,140', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412459986946', '2022C60', '大渡河老鹰岩二级水电站施工测量控制网设计、建网及首次观测', 102, '0', '0', '0231', '龙宇杰、苗永盛', '15198088143、18783565137', '施工测量控制网', '0', 22, '112', 20, 103, NULL, '2022-07-25', NULL, '2022-07-25', '2022-08-03', '2022-10-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412476764161', '2022C61', '金沙江上游清洁能源基地叶巴滩抽水蓄能电站达西沟渣场1:2000地形图测绘', 15, '0', '0', '0231', '龙宇杰、秦青松', '15198088143、18299093759', '地形图测绘', '0', 13, '115', 20, 144, NULL, '2022-07-25', NULL, '2022-07-25', '2022-07-26', '2022-08-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412493541377', '2022C59', '大渡河老鹰岩一级水电站施工测量控制网设计、建网及首次观测', 102, '0', '0', '0231', '龙宇杰、苗永盛', '15198088143、18783565137', '施工测量控制网', '0', 22, '112', 20, 101, NULL, '2022-07-25', NULL, '2022-07-25', '2022-08-03', '2022-10-10', NULL, NULL, NULL, NULL, NULL, '14', '132', '49,53,54,55,60,52,56,99', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412514512898', '2022C58', '资源县（马家站点）抽水蓄能电站地形地类图测绘', 83, '0', '0', '0231', '龙宇杰、雷运华', '15198088143、18782936832', '地形地类图测绘', '0', 13, '111,107,110', 20, 71, NULL, '2022-07-18', NULL, '2022-07-19', '2022-07-21', '2022-07-31', NULL, NULL, NULL, NULL, NULL, NULL, '132', '66,105,64,106,99,6,130', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412535484418', '2022C57', '新华水力发电有限公司博州10万千瓦储热型光热配建90万千瓦新能源项目勘测定界、土地预审与选址意见书办理', NULL, '0', '0', '0238', '姚鹏', '15361284599', '勘界及测绘', '0', 22, '106', 20, NULL, NULL, '2022-07-15', NULL, '2022-07-18', '2022-07-17', '2022-09-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412552261633', '2022C56', '新华水力发电有限公司博州10万千瓦储热型光热配建90万千瓦新能源项目地形图测绘', NULL, '0', '0', '0238', '姚鹏', '15361284599', '地形图测绘', '0', 22, '107,106', 20, NULL, NULL, '2022-07-15', NULL, '2022-07-18', '2022-07-17', '2022-09-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '100,101,157,151,164,169,108,73,108,161', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412573233153', '2022C55', '两河口混蓄电站项目地形图测绘', 33, '0', '0', '0231', '唐鑫、李秋凡', '028-62009511、13881967113', '地形图测绘', '0', 13, '110,201', 20, 122, NULL, '2022-07-14', NULL, '2022-07-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2', '132', '186,65,66,140,63', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412594204674', '2022C54', '攀枝花三峡光伏发电项目地形图测', 94, '0', '0', '0238', '王雅雯', '15008405727', '地形图测绘', '0', 13, '111,107,110', 20, 94, NULL, '2022-07-14', NULL, '2022-07-14', '2022-07-18', '2022-11-03', '每个厂区需布设满足后续专业所需的五等控制点。', NULL, NULL, NULL, NULL, '4', '136', '177,45,10,199,149,152,161,160,109', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412610981889', '2022C53', '宗西抽水蓄能电站地形图测绘', 144, '0', '0', '0237', '张团', '13908203321', '地形图测绘', '0', 13, '115', 20, 144, NULL, '2022-07-11', NULL, '2022-07-12', '2022-07-18', '2022-07-27', NULL, NULL, NULL, NULL, NULL, '5', '130', '100,101,102,176,9,46,47', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412631953410', '2022C51', '孟底沟水电站张牙沟35kV变电站、民爆器材库测绘项目', 113, '1', '0', '0231', '龙宇杰、雷运华', '15198088143、18782936832', '地形图测绘', '0', 22, '111,110', 20, 113, NULL, '2022-07-08', NULL, '2022-07-08', '2022-07-10', '2022-07-15', NULL, NULL, NULL, NULL, NULL, '4', '136', '98,31,176,177,150', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412648730625', '2022C52', 'CZTL康定段征地拆迁安置点规划设计项目地形图测绘', 84, '1', '0', '0227', '徐露珮', '15281069899', '地形图测绘', '0', 22, '110,201', 20, 122, NULL, '2022-07-08', NULL, '2022-07-11', '2022-07-11', '2022-07-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412665507842', '2022C50', '老鹰岩水电站支流1:1000水下地形图测绘及松林河南桠河大断面测量', 94, '0', '0', '0234', '陈享莉', '13981736929', '地形图测绘', '0', 22, '111,110', 20, 94, NULL, '2022-07-08', NULL, '2022-07-08', '2022-07-07', '2022-07-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412682285058', '2022C49', '直孔抽水蓄能水电站预可阶段地形图测绘', 83, '0', '0', '0237', '周小波', '18980568501', '地形图测绘', '0', 13, '111,110', 20, 83, NULL, '2022-06-28', NULL, '2022-06-28', '2022-06-23', '2022-07-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412699062273', '2022C48', '八曲抽水蓄能电站地形图测绘', 15, '0', '0', '0237', '张团', '13908203321', '地形图测绘', '0', 13, '115', 20, 144, NULL, '2022-06-27', NULL, '2022-06-27', '2022-06-29', '2022-07-05', NULL, NULL, NULL, '96.5663230611367', '30.592736420014543', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412715839489', '2022C47', '石棉县双家沟地形图测绘', 33, '0', '0', '0227', '王勇', '15928683672', '地形图测绘', '0', 13, '110', 20, NULL, NULL, '2022-06-20', NULL, '2022-06-20', '2022-06-22', '2022-06-26', 'CGCS2000,85高程基准。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412736811010', '2022C45', '广西南宁上林抽水蓄能电站测绘工作', 32, '0', '0', '0231', '龙宇杰、雷运华', '15198088143、18782936832', '地形图测绘', '0', 13, '107', 11, NULL, NULL, '2022-06-17', NULL, '2022-06-17', '2022-06-20', NULL, '视后续其他专业需要布设一定工作量的控制点', NULL, NULL, '108.55294606', '23.61892366', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412753588225', '2022C46', '猴子岩水电站取水口及水厂新址1:500地形图测绘', 63, '0', '0', '0227', '李强', '18215505713', '地形图测绘', '0', 13, '106', 20, 63, NULL, '2022-06-17', NULL, '2022-06-17', '2022-06-20', '2022-06-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412774559745', '2022C44', '天星坝施工控制网点恢复测量及现场点位移交工作', 101, '1', '0', '0227', '欧玉鹏', '13688028219', '施工测量控制网', '0', 13, '112', 20, 101, NULL, '2022-06-16', NULL, '2022-06-16', '2022-06-22', '2022-07-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '52,55,59,49,56,51,4,159', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412795531265', '2022C43', '金沙江上游清洁能源基地叶巴滩抽水蓄能电站测绘', 33, '0', '0', '0231', '龙宇杰、马宏', '15198088143、13882264834', '地形图测绘', '0', 13, '111,107,110', 20, 35, NULL, '2022-06-15', NULL, '2022-06-16', NULL, NULL, '该项工作与2021C68任务合并。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412812308481', '2022C41', '凉山州沙岱地块光伏发电项目', 142, '0', '0', '0238', '高志东', '15008214556', '地形图测绘', '0', 13, '116', 20, 142, NULL, '2022-06-13', NULL, '2022-06-13', '2022-06-13', '2022-07-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412829085697', '2022C40', '凉山州甘洛二号地块光伏发电项目地形图测绘', 142, '0', '0', '0238', '高志东', '15008214556', '地形图测绘', '0', 13, '116', 20, 142, NULL, '2022-06-13', NULL, '2022-06-13', '2022-06-13', '2022-07-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412845862913', '2022C39', '奔戈、南桠光伏发电项目地形图测绘工作', 33, '0', '0', '0238', '王雅雯', '15008405727', '地形图测绘', '0', 13, '111,107,110,110', 20, 94, NULL, '2022-06-10', NULL, '2022-06-13', NULL, NULL, NULL, 'uploadkmlFiles\\2021C53大邑抽水蓄能控制点.kml', 'uploadkmlFiles\\2021C53大邑测图范围.kml', NULL, NULL, '5', '130', '46,47,48,53,60,110,6', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412875223041', '2022C38', '山西左权箕山抽水蓄能电站测绘工作', 32, '0', '0', '0231', '唐鑫、许韬', '17748784936、13880409922', '地形图测绘', '0', 13, '107', 11, 32, NULL, '2022-06-08', NULL, '2022-06-08', '2022-06-09', '2022-06-19', NULL, NULL, 'uploadkmlFiles\\2021W24-飞行航线.kml', '113.5927980331679', '36.98295551027623', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412892000257', '2022C36', '昌都卡瓦白庆抽水蓄能测绘工作', 15, '0', '0', '0237', '张团', '13908203321', '地形图测绘', '0', 13, '115', 20, 143, NULL, '2022-06-07', NULL, '2022-06-09', '2022-06-13', '2022-06-25', NULL, NULL, NULL, NULL, NULL, '2', NULL, '160,163,76,82,9,146', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412912971777', '2022W25', '2022年中央补助支持城镇老旧小区改造（什邡）工程', 113, '0', '1', '0246', '朱静', '18030520048', '地形图测绘', '0', 13, '106', 20, 113, NULL, '2022-06-07', NULL, '2022-06-08', '2022-06-10', '2022-06-25', NULL, NULL, NULL, NULL, NULL, '4', '16', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412929748993', '2022C37', '雅安市石棉县碳酸钙复合新材料产业园基础设施建设项目（大堡料场）勘界工作', 144, '0', '0', '0227', '王勇', '15928683672', '勘界及测绘', '0', 13, '115', 20, 144, NULL, '2022-06-07', NULL, '2022-06-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412946526209', '2022C35', '雅砻江柯拉乡光伏发电项目地形图测绘', 61, '0', '0', '0238', '任雁飞', '18633699038', '地形图测绘', '0', 13, '111,107,110', 20, 61, NULL, '2022-06-02', NULL, '2022-06-06', '2022-06-03', '2022-06-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412963303425', '2022W24', '广西平那高速公路测量项目', 144, '0', '1', '0220', '沈默', '15968822849', '公路测量', '0', 13, '115', 11, NULL, NULL, '2022-06-02', NULL, '2022-06-02', '2022-06-05', '2024-03-13', NULL, NULL, NULL, NULL, NULL, '6', '131', '87,88,116,200,125,140', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881412984274945', '2022C42', '大岗山水电站泄洪洞出口测绘技术服务合同', 83, '0', '0', '0231', '唐鑫', '028-62009511', '地形图测绘', '0', 22, '111', 20, 83, NULL, '2022-05-27', NULL, '2022-06-14', '2022-03-11', '2022-03-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413009440769', '2022C33', '革什扎河两河口水电站坐标转换工作', 50, '1', '0', '0231', '庞明亮', '13880197908', '坐标转换', '0', 13, '109,203', 20, 121, NULL, '2022-05-27', NULL, '2022-05-27', '2022-05-27', '2022-05-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413030412290', '2022C34', '巴楚河松多水电站坐标转换', 50, '1', '0', '0231', '童建文', '13981865723', '坐标转换', '0', 13, '111,109', 20, 94, NULL, '2022-05-27', NULL, '2022-05-27', '2022-05-27', '2022-05-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413051383810', '2022W23', '武侯悦湖·硬科技创新中心标准厂房项目1:500地形图测绘', NULL, '0', '1', '0012', '申剑波', '13688038618', '地形图测绘', '0', 13, '111', 20, NULL, NULL, '2022-05-26', NULL, '2022-05-26', '2022-05-26', '2022-06-28', NULL, NULL, NULL, '103.96825081515479', '30.634963303009275', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413072355329', '2022W22', '浙江宁海抽水蓄能电站上下库库容曲线测量服务技术服务合同', 20, '0', '1', '0221', '葛工', '15867014469', '库容复核', '0', 13, '106', 20, 20, NULL, '2022-05-24', NULL, '2022-05-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413093326850', '2022W21', '黄河干流若尔盖段应急处置项目竣工测量', 113, '1', '1', '0261', '萧工', '13980569576', '地形图测绘', '0', 13, '106', 20, 113, NULL, '2022-05-23', NULL, '2022-05-23', '2022-05-24', '2022-05-27', NULL, NULL, NULL, NULL, NULL, '3', '135', '31,16,45', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413114298369', '2022C32', '龚嘴电站鱼道工程渣场地形图测量', 71, '0', '0', '0231', '唐鑫、刘成英', '17748784936、13541216976', '地形图测绘', '0', 13, '111', 20, 71, NULL, '2022-05-18', NULL, '2022-05-18', '2022-05-19', '2022-05-21', NULL, NULL, NULL, '103.47470157674886', '29.272303734207892', NULL, NULL, '53,65', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413131075586', '2022C31', '直孔电站库容复核测绘工作', 83, '0', '0', '0237', '周小波', '18980568501', '地形图测绘', '0', 13, '111,110', 20, 83, NULL, '2022-05-12', NULL, '2022-05-16', '2022-05-15', '2022-07-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '167,163', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413147852802', '2022C30', '金上-湖北±800千伏直流工程换流站建设征地实物指标调查', 94, '0', '0', '0227', '吴晓', '18583363583', '实物指标配合测量', '0', 13, '111', 20, 94, NULL, '2022-05-11', NULL, '2022-05-11', '2022-05-12', '2022-06-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '48,9,34', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413164630018', '2022C29', '雅安市名山区百丈镇临溪河综合整治项目地形图测绘', 71, '0', '0', '0227', '唐中强', '18030805232', '地形图测绘', '0', 13, '111,115', 20, 71, NULL, '2022-05-11', NULL, '2022-05-11', '2022-05-13', '2022-05-21', NULL, NULL, NULL, '103.26770834215749', '30.186430050633184', '6', '16', '73,177', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413181407233', '2022C28', '广东省梅县九龙嶂、台山黄茅岗抽蓄电站规划阶段测绘工作', 32, '0', '0', '0231', '蔡斌', '13880680956', '地形图测绘', '0', 13, '112,107,115', 20, 101, NULL, '2022-05-06', NULL, '2022-05-07', '2022-05-08', '2022-05-27', NULL, NULL, NULL, NULL, NULL, '1', NULL, '45,47,156,157,149,115', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413193990145', '2022C27', '大岗山水电站库尾实物指标配合测量', 15, '0', '0', '0227', '程德华', '13551343689', '实物指标配合测量', '0', 13, '115', 20, 144, NULL, '2022-04-28', NULL, '2022-05-05', '2022-05-07', '2022-05-13', NULL, NULL, NULL, NULL, NULL, '3', '135', '6,102,11,100', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413210767362', '2022C24', '芦山县禾茂田园地形图测绘', 15, '0', '0', '0227', '邓韬略', '15882318271', '地形图测绘', '0', 13, '115', 20, 144, NULL, '2022-04-21', NULL, '2022-04-21', '2022-04-22', '2022-04-22', NULL, NULL, NULL, NULL, NULL, '1', NULL, '149', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413227544578', '2022C25', '狮子坪电站弃渣料场地形图测绘', 15, '0', '0', '0231', '唐鑫、黎昌有', '18080496416、13981813952', '地形图测绘', '0', 13, '115', 20, 144, NULL, '2022-04-21', NULL, '2022-04-21', '2022-04-24', '2022-04-26', NULL, NULL, NULL, NULL, NULL, NULL, '136', '47,45,9', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413244321794', '2022C23', '江油抽水蓄能电站预可阶段测绘工作', 71, '0', '0', '0231', '华博深', '18080496416', '地形图测绘', '0', 13, '111,107', 20, 71, NULL, '2022-04-18', NULL, '2022-04-19', '2022-04-21', '2022-05-07', NULL, NULL, NULL, NULL, NULL, '4', '136', '146,90', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413265293314', '2022C21', '紫霞水电站库区垫高防护工程和供水水源雅嘎措地形图测绘', 33, '0', '0', '0227', '任萧', '13628025974', '地形图测绘', '0', 13, '110,111', 20, 94, NULL, '2022-04-08', NULL, '2022-04-08', '2022-04-09', '2022-04-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413277876226', '2022C20', '雅砻江公司盐源3#、8#地块光伏地形图测绘', 144, '0', '0', '0238', '刘伟', '13982051817', '地形图测绘', '0', 13, '115', 20, 144, NULL, '2022-04-07', NULL, '2022-04-07', '2022-04-08', '2022-04-28', NULL, NULL, NULL, NULL, NULL, '2', NULL, '170,161', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413294653441', '2022W19', '黄河四川段综合治理可行性研究项目测绘工作项目	（补充）', 113, '1', '1', '0090', '曹勇', '15838194831', '地形图测绘', '0', 13, '106', 142, 113, NULL, '2022-03-31', NULL, '2022-04-01', '2022-04-02', '2022-04-13', NULL, NULL, NULL, NULL, NULL, '2', '131', '45,47,168,141', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413311430658', '2022W20', '云南罗富高速公路航飞项目', 35, '0', '1', '0260', '李禺', '13980977233', '公路测量', '0', 13, '107', 142, 35, NULL, '2022-03-31', NULL, '2022-04-01', '2022-04-03', '2022-04-13', NULL, NULL, NULL, NULL, NULL, '4', '136', '59', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413328207874', '2022W17', '国网西藏拉萨发电公司直孔电站变形监测控制网复测及工作基点校测技术服务', 101, '1', '1', '0085', '汪吉德', '18689045539', '工程监测', '0', 22, '112', 142, 109, NULL, '2022-03-30', NULL, '2022-03-31', '2022-04-07', '2023-01-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '105,114,200', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413344985090', '2022W18', '国网拉萨发电公司2022年直孔大坝、羊湖压力钢管等定期变形监测及年度资料整编技术服务', 101, '0', '1', '0085', '汪吉德', '18689045539', '工程监测', '0', 22, '112', 142, 109, NULL, '2022-03-30', NULL, '2022-03-31', '2022-04-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '87,18', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413361762305', '2022W15', '泸县2021年度国土变更调查', 59, '0', '1', '0111', '张亮', '13982406421', '国土变更调查', '0', 22, '106', 142, 59, NULL, '2022-03-25', NULL, '2022-03-25', '2022-01-15', '2022-12-10', '补登记', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413378539521', '2022W16', '石棉县孟获城景区规划用地202226号、202227号宗地1:500地形图测绘技术服务项目', 15, '0', '1', '0157', '王军', '13795840666', '地形图测绘', '0', 24, '115', 142, 15, NULL, '2022-03-25', NULL, '2022-03-29', '2022-03-31', '2022-04-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413395316737', '2022W14', '乳源高新区绿之源西侧地块标准厂房建设项目沉降监测技术服务合同', 101, '1', '1', '0138', '李晨、周全', NULL, '工程监测', '0', 13, '112', 142, 101, NULL, '2022-03-24', NULL, '2022-03-24', '2022-01-01', '2022-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413412093953', '2022C18', '牙根二级水电站可研阶段测绘', 61, '0', '0', '0231', '唐鑫、刘思丁', '17748784936、13880826590', '地形图测绘', '1', 13, '108,110,111,107,201', 20, 61, NULL, '2022-03-24', NULL, '2022-03-24', '2022-04-07', '2022-07-06', NULL, NULL, NULL, NULL, NULL, '14', '132', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413428871170', '2022C19', 'XR水电站补充测绘工作', 144, '0', '0', '0231', '唐鑫、邹子南', '17748784936、13548039577', '地形图测绘', '0', 13, '115', 20, 144, NULL, '2022-03-24', NULL, '2022-03-24', '2022-04-10', '2022-04-15', NULL, NULL, 'uploadkmlFiles\\道孚-点云范围线-CGCS2000-高斯投影3度带-中央经线102°.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413441454081', '2022C17', '石棉县小水工业集中区迎政-永和组团基础设施项目测绘', 144, '0', '0', '0227', '王铁虎', '13980726634', '地形图测绘', '0', 13, '115', 20, 144, NULL, '2022-03-23', NULL, '2022-03-24', '2022-03-26', '2022-04-03', '1:2000范围线包含了1:1000的测图范围，但1:1000范围不需要再缩编为2000地形图', NULL, NULL, NULL, NULL, '3', '135', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413462425602', '2022W13', '新疆哈密抽水蓄能电站工程开挖区域精密测量及工程量计算技术服务合同', 34, '0', '1', '0224', '马英泽', '18310011251', '地形图测绘', '0', 13, '107', 142, 34, NULL, '2022-03-22', NULL, '2022-03-23', '2022-03-23', '2022-03-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '142', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413483397121', '2022C16', '楞古水电站预可阶段测绘技术服务', 61, '0', '0', '0231', '唐鑫', '17748784936', '地形图测绘', '0', 13, '111,115', 20, 61, NULL, '2022-03-21', NULL, '2022-03-21', '2022-03-28', '2022-04-20', '规划：梁楚盛15882082245，环保：张伟13689015389（须加强与用户单位沟通落实确认具体测量范围，需办按当地', 'uploadkmlFiles\\绵竹控制点位_地标.kml', NULL, NULL, NULL, '3', '135', '200,86', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413500174338', '2022W12', '永善公路1:2000地形图测量项目', 32, '0', '1', '0076', '李建军', '13985012651', '地形图测绘', '0', 13, '107', 20, 32, NULL, '2022-03-17', NULL, '2022-03-21', '2022-03-13', '2022-03-18', NULL, NULL, NULL, '103.4701166', '28.05542634', '2', '131', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413512757249', '2022C15', '孟底沟水电站场内交通左岸、右岸公路工程项目测量', 71, '0', '0', '0229', '李任华', '13980088186', '公路测量', '0', 13, '111', 20, 71, NULL, '2022-03-15', NULL, '2022-03-17', '2022-03-19', '2022-04-09', NULL, NULL, NULL, NULL, NULL, '5', '130', '82,84,100,110,101,10,6,83,177,6', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413529534465', '2022W11', '黄河干流若尔盖段应急处置项目原始水下地形测量', 113, '1', '1', '0261', '萧工', '13980569576', '地形图测绘', '0', 13, '106', 20, 113, NULL, '2022-03-10', NULL, '2022-03-10', '2022-04-12', '2022-04-15', '工作量及范围须与甲方再沟通落实。', NULL, NULL, NULL, NULL, NULL, NULL, '110,31,161', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413550505985', '2022C14', '紫霞水电站溃坝分析断面测量及地形图测量', 94, '0', '0', '0231', '王晓安、周静', '13981758359、13350870068', '地形图测绘', '0', 13, '111', 20, 94, NULL, '2022-03-10', NULL, '2022-03-14', '2022-03-20', '2022-03-26', NULL, 'uploadkmlFiles\\ML控制点分布图.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413567283202', '2022C13', '双江口水电站浦西房屋高程点测量', 121, '0', '0', '0227', '罗鹏', '13408698670', '其它测绘项目', '0', 13, '203', 20, 121, NULL, '2022-03-09', NULL, '2022-03-10', '2022-03-09', '2022-03-12', NULL, NULL, 'uploadkmlFiles\\华能营地.kmL', NULL, NULL, NULL, NULL, '110', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413584060417', '2022C12', '硬梁包电站扯索坝和二里坝桥行洪论证测绘', 83, '0', '0', '0231', '颜志衡', '13688470409', '地形图测绘', '0', 13, '111', 20, 83, NULL, '2022-02-28', NULL, '2022-02-28', '2022-03-02', '2022-03-07', NULL, NULL, NULL, '102.20476445', '29.69155748', '5', '130', '109,108,31', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413605031938', '2021C107', '两河口移民代建工程施工测量测绘服务（2021）', 112, '1', '0', '0225', '李建斌', '18381453118', '工程测量中心', '0', 13, '104', 20, NULL, NULL, '2022-02-24', NULL, '2022-02-24', '2021-01-01', '2021-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413626003458', '2022C11', '两河口移民代建工程施工测量测绘服务（2022年）', 122, '0', '0', '0225', '李建斌', '18381453118', '工程测量中心', '0', 13, '201', 20, 122, NULL, '2022-02-24', NULL, '2022-02-24', '2022-01-01', NULL, NULL, NULL, 'uploadkmlFiles\\2021C72江油抽水蓄能电站预可阶段测绘范围线.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413651169282', '2022C09', '焦子坪移民安置点、引水线路等地形图测量', 71, '0', '0', '0227', '李鑫', '13518143295', '地形图测绘', '0', 13, '111', 20, 71, NULL, '2022-02-23', NULL, '2022-02-23', '2022-02-26', '2022-03-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '110', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413667946498', '2022C10', '长河坝水电站牛棚子沟泥石流治理工程初步设计1:1000地形图及菩提河坝安置场地后坡危岩治理工程设计变更1:50', 71, '0', '0', '0227', '徐明山', '18580184267', '地形图测绘', '0', 13, '111', 20, 71, NULL, '2022-02-23', NULL, '2022-02-24', '2022-02-26', '2022-03-01', NULL, NULL, NULL, NULL, NULL, '14', '132', '163,6', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413684723714', '2022C08', '老木孔水电站移民征地1:2000地形图测绘', 61, '0', '0', '0231', '罗鹏', '13408698670', '地形图测绘', '0', 13, '111', 142, 145, NULL, '2022-02-16', NULL, '2022-02-17', '2022-02-19', '2022-03-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413709889537', '2022C07', '瀑布沟丰乐浸水湾1000地形图测绘', 71, '0', '0', '0227', '莫坤华', '13608086723', '地形图测绘', '0', 13, '111', 20, 71, NULL, '2022-02-14', NULL, '2022-02-14', '2022-02-15', '2023-02-20', NULL, 'uploadkmlFiles\\控制点.kml', 'uploadkmlFiles\\界桩范围线.kml', NULL, NULL, NULL, NULL, '163,6,100102,98', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413730861058', '2022W10', '2022年西安路街道办事处老旧小区院落改造项目测绘工作', NULL, '0', '1', '0023', '李主任', '18982156930', '地籍及房产测绘', '0', 13, '108', 142, NULL, NULL, '2022-01-25', NULL, '2022-01-26', '2022-02-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413751832578', '2022C06', '溪洛渡水电站天星坝水库界桩测设', 113, '1', '0', '0227', '欧玉鹏', '13688028219', '界桩测设', '0', 13, '106', 20, 113, NULL, '2022-01-23', NULL, '2022-03-17', '2022-03-23', '2022-04-05', NULL, NULL, NULL, NULL, NULL, '14', '132', '107,101,167', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413768609794', '2022W26', '国能四川阿水电力开发有限公司绰斯甲水电站工程测量中心技术服务（2022年）', 149, '0', '1', '0083', '刘胜', '17780674912、028-85935753', '工程测量中心', '0', 22, '116', 11, 149, NULL, '2022-01-20', NULL, '2022-01-05', '2022-01-18', '2022-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413785387010', '2022W06', '雅砻江桐子林水电站大坝外部变形和近坝区滑坡体观测（2022年）', 102, '1', '1', '0202', '高翠峰', '0812-3331998', '工程监测', '0', 22, '112', 142, 102, NULL, '2022-01-14', NULL, '2022-01-19', '2022-01-01', '2022-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413806358530', '2022W09', '四川省雅砻江两河口水电站工程测量中心服务（2022年）', 122, '0', '1', '0200', '高翠峰', NULL, '工程测量中心', '0', 22, '201', 142, 122, NULL, '2022-01-14', NULL, '2022-01-19', '2022-01-01', NULL, NULL, NULL, NULL, NULL, NULL, '6', '16', '11', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413827330049', '2022W08', '大渡河金川水电站工程测量中心劳务配合（2022年）', 121, '0', '1', '0242', '杨木子', '15274878801', '工程测量中心', '0', 22, '203', 142, 121, NULL, '2022-01-14', NULL, '2022-01-19', '2019-08-07', '2026-06-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413844107265', '2022W07', '大渡河猴子岩水电站外部变形监测工程（2022年）', 101, '1', '1', '0080', NULL, NULL, '工程监测', '0', 22, '112', 142, 101, NULL, '2022-01-14', NULL, '2022-01-19', '2022-01-01', '2022-12-31', NULL, NULL, NULL, NULL, NULL, '4', '136', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413860884481', '2022W05', '雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测（2022年）', 102, '0', '1', '0200', '高翠峰', NULL, '工程监测', '0', 22, '112', 142, 102, NULL, '2022-01-14', NULL, '2022-01-19', '2022-01-01', '2022-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '101,154,48', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413877661698', '2022C05', '宁南果木二期风电项目地形图测绘', NULL, '0', '0', '0238', '陈璇', '17716467265', '地形图测绘', '0', 13, '111', 20, NULL, NULL, '2022-01-14', NULL, '2022-01-14', '2022-01-16', '2022-02-23', NULL, NULL, NULL, NULL, NULL, '2', '131', '145', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413894438914', '2022C04', '川西大桥固床坝及工点边坡地形图测量', NULL, '0', '0', '0229', '宋书志', '13540083583', '地形图测绘', '0', 13, '111', 20, NULL, NULL, '2022-01-12', NULL, '2022-01-12', '2022-01-18', '2022-01-21', NULL, NULL, NULL, NULL, NULL, '4', '136', '31', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413911216130', '2022C03', '老木孔航电枢纽工程航道整治测量', 145, '0', '0', '0231', '石太军、罗勇', '13980519026、13808211293', '地形图测绘', '0', 22, '110,111,107', 142, 145, NULL, '2022-01-07', NULL, '2022-01-10', '2022-01-17', '2022-03-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413927993346', '2022W02', '黄河干流若尔盖段应急处置（抢险救灾）工程', 113, '1', '1', '0090', '索二峰', '13903866104', '地形图测绘', '0', 13, '106', 142, 113, NULL, '2022-01-04', NULL, '2022-01-04', '2022-01-05', '2022-01-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413948964865', '2022C01', '猴子岩水电站地形图测量', 145, '0', '0', '0231', '窦向贤', '13981914997', '地形图测绘', '0', 13, '110,111', 142, 145, NULL, '2022-01-04', NULL, '2022-01-04', '2022-01-05', '2022-01-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '81,97,61,12', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413965742081', '2022W04', '四川大渡河双江口水电站枢纽工程测量中心服务（2022年）', 120, '0', '1', '0159', '李锋', NULL, '工程测量中心', '0', 22, '202', 142, 120, NULL, '2022-01-04', NULL, '2022-01-04', '2022-01-01', '2022-12-31', '四川大渡河双江口水电站枢纽工程测绘技术服务合同', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881413986713601', '2022W03', '四川省脚木足河巴拉水电站工程测量中心技术服务(2022年)', 120, '0', '1', '0186', NULL, NULL, '工程测量中心', '0', 22, '202', 142, 120, NULL, '2022-01-04', NULL, '2022-01-04', '2022-01-01', '2022-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414003490818', '2021W40', '重庆城际快轨可研项目1:2000地形图测绘', 113, '1', '1', '0275', '郭彩立', '13594198134', '地形图测绘', '0', 13, '106', 142, 113, NULL, '2021-12-31', NULL, '2022-01-04', '2022-01-01', '2022-01-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414020268033', '2021C105', '溪洛渡水电站雷波库区滑坡塌岸配合测量', 83, '0', '0', '0227', '黄小强', '13438892085', '配合测量', '0', 13, '111', 142, 74, NULL, '2021-12-13', NULL, '2021-12-14', '2021-12-14', '2021-12-17', NULL, 'uploadkmlFiles\\2022C68屏山抽水蓄能电站西村站址地形图控制点.kml', 'uploadkmlFiles\\屏山抽蓄范围.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414037045250', '2021C104', '直孔水电站抽水蓄能项目地形图测绘', 61, '0', '0', '0237', '周小波', '18980568501', '地形图测绘', '0', 13, '111', 142, 61, NULL, '2021-12-08', NULL, '2021-12-10', '2021-12-15', '2021-12-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414049628162', '2021W38', '四川遂宁能源职业学院建设项目1：500地形图测绘（补登）', 61, '0', '1', '0249', NULL, NULL, '地形图测绘', '0', 13, '111', 142, 61, NULL, '2021-12-08', NULL, '2021-12-09', '2020-12-26', '2020-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414066405377', '2021W41', '四川大渡河双江口水电站枢纽工程施工测量控制网复测（2021年）', 120, '1', '1', '0159', '李锋', NULL, '施工测量控制网', '1', 22, '202', 142, 120, NULL, '2021-12-01', NULL, '2021-12-02', '2021-11-15', '2022-01-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414066405378', '2021W42', '文殊坊周边环境综合提升工程测绘项目技术服务合同', 143, '0', '1', '0021', '黎超', NULL, '地形图测绘', '0', 22, '115', 112, 143, NULL, '2023-05-16', NULL, '2023-05-16', '2021-12-25', '2021-12-31', '2021年的项目，由于需要委外支付故补登记。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414066405379', '2021W43', '重庆轨道交通4号线西延伸段（一标段）土建2标、土建5标出入段线第三方监测劳务合同协议书', 138, '0', '1', '0275', '刘洋、刘春林', '023-67908215', '工程监测', '0', 22, '114', 112, 138, NULL, '2023-12-11', NULL, '2023-12-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414078988290', '2021W36', '大渡河金川水电站工程测量中心劳务配合（2021年）', 121, '0', '1', '0242', '杨木子', '15274878801', '工程测量中心', '0', 13, '203', 20, 121, NULL, '2021-12-01', NULL, '2021-12-01', '2019-08-06', '2026-06-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414095765505', '2022W01', '雅砻江桐子林水电站水库泥沙断面测量（2022年）', NULL, '0', '1', '0202', '高翠峰', '0812-3331998', '泥沙监测', '0', 13, '111', 20, NULL, NULL, '2021-12-01', NULL, '2021-12-02', '2021-12-11', '2022-01-12', NULL, NULL, NULL, NULL, NULL, '7', '136', '134,61,10,65,11,133,140,177', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414116737025', '2021W35', '确如多水电站料场及渣场地形图测量', 142, '0', '1', '0102', '倪道明', '17781696625', '地形图测绘', '0', 13, '106', 20, 142, NULL, '2021-11-29', NULL, '2021-12-01', '2021-11-29', '2021-12-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414137708545', '2021C103', '洼垴水电站修复项目地形图测量', NULL, '0', '0', '0231', '谷玲', '13438336835', '地形图测绘', '0', 13, '111', 20, NULL, NULL, '2021-11-29', NULL, '2021-12-01', '2021-11-25', '2021-11-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414154485761', '2021C102', 'JW和XR吊桥施工图', 61, '0', '0', '0231', '付锐、罗勇、邹子南', '15587158190、13808211293、13548039577', '地形图测绘', '0', 13, '111', 20, 61, NULL, '2021-11-29', NULL, '2021-12-01', '2021-12-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414175457281', '2021C101', '惠州惠阳区屋顶分布式光伏电站测绘项目', 101, '1', '0', '0235', '仇欣', '13880686176', '地籍及房产测绘', '0', 13, '108,112', 20, 101, NULL, '2021-11-24', NULL, '2021-11-25', '2021-11-17', '2021-12-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '45', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414192234498', '2021C100', '鲜水河3#抽水蓄能电站预可阶段地形图测绘', 122, '0', '0', '0233', '袁有仓', '18682751096', '地形图测绘', '0', 13, '201', 20, 122, NULL, '2021-11-23', NULL, '2021-11-25', '2021-11-26', '2021-11-29', NULL, NULL, NULL, '102.20476445', '29.69155748', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414213206018', '2021C99', '大岗山水电站雨洒河—大坝左坝肩连接道路1:500地形图测绘', NULL, '0', '0', '0229', '张建', '13880321033', '地形图测绘', '0', 13, '111', 20, NULL, NULL, '2021-11-22', NULL, '2021-11-22', '2021-11-23', '2021-11-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414234177537', '2021C98', '芦山县河道治理工程地形图测绘', 15, '0', '0', '0227', '王铁虎', '13980726634', '地形图测绘', '0', 13, '115', 142, 15, NULL, '2021-11-19', NULL, '2021-11-19', '2021-11-23', '2021-11-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414259343361', '2021C96', '甘孜抽水蓄能电站地形图测绘', 83, '0', '0', '0231', '袁有仓', '18121868058', '地形图测绘', '0', 13, '111', 142, 145, NULL, '2021-11-15', NULL, '2021-11-15', '2021-11-16', '2021-11-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414276120578', '2021C97', '白玉抽水蓄能电站地形图测绘', 83, '0', '0', '0231', '袁有仓', '18121868058', '地形图测绘', '0', 13, '111', 142, 145, NULL, '2021-11-15', NULL, '2021-11-15', '2021-11-27', '2021-12-29', NULL, NULL, NULL, NULL, NULL, '3', '135', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414292897793', '2021C95', '金川抽水蓄能电站地形图测绘', 83, '0', '0', '0231', '袁有仓', '18121868058', '地形图测绘', '0', 13, '111', 142, 145, NULL, '2021-11-15', NULL, '2021-11-16', '2021-11-29', '2021-12-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414313869314', '2021C94', '紫霞水电站补充测绘工作', 61, '0', '0', '0231', '罗勇、吴晨阳', '13808211293、13981861163', '地形图测绘', '0', 13, '111', 142, 61, NULL, '2021-11-09', NULL, '2021-11-10', '2021-11-16', '2021-11-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414334840833', '2021C92', '牙根一级水电站产卵场1:1000地形图测绘', 113, '1', '0', '0231', '罗勇、张伟', '13808211293、13689015389', '地形图测绘', '0', 13, '106', 142, 113, NULL, '2021-11-08', NULL, '2021-11-09', '2021-11-10', '2021-11-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414355812353', '2021C93', '田湾河外部供水地形图测绘', 113, '1', '0', '0227', '唐中强', '18030805232', '地形图测绘', '0', 13, '106', 142, 113, NULL, '2021-11-08', NULL, '2021-11-09', '2021-11-09', '2021-11-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414372589569', '2021C91', '瀑布沟水电站下游河道1:500地形图测量', 145, '0', '0', '0231', '冉从勇、罗勇', '18980568586、13808211293', '地形图测绘', '0', 13, '111', 20, 145, NULL, '2021-11-04', NULL, '2021-11-04', '2021-12-27', '2021-12-30', NULL, NULL, NULL, NULL, NULL, '3', '135', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414389366785', '2021C90', '亚龙水电站预可阶段地形图测绘', 61, '0', '0', '0231', '田雄、罗勇', '15902805101、13808211293', '地形图测绘', '0', 13, '110,111', 20, 71, NULL, '2021-11-04', NULL, '2021-11-04', '2021-11-06', NULL, NULL, NULL, NULL, '94.07588482', '30.45512937', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414410338305', '2021C89', '芦山抽水蓄能电站预可阶段测绘', 15, '0', '0', '0231', '袁有仓', '18121868058', '地形图测绘', '0', 7, '115', 142, 15, NULL, '2021-11-04', NULL, '2021-11-05', '2021-11-10', '2021-12-04', NULL, NULL, NULL, NULL, NULL, '14', '132', '83,153,75', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414431309825', '2021C88', '南江抽水蓄能电站预可阶段测绘', 33, '0', '0', '0231', '袁有仓', '18121868058', '地形图测绘', '0', 7, '110,106', 20, 113, NULL, '2021-10-28', NULL, '2021-10-29', NULL, NULL, NULL, NULL, NULL, '106.937826556076', '32.2163798127344', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414456475649', '2021C87', '绰斯甲水电站坝址厂址区三维地形面制作及坐标转换', 33, '0', '0', '0231', '向贤友、罗勇', '15928516168、13808211293', '三维地形面', '0', 13, '110', 142, 33, NULL, '2021-10-21', NULL, '2021-10-22', '2021-10-22', '2021-10-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414473252866', '2021C86', '长河坝野坝村地形图测量', 145, '0', '0', '0227', '张波', '13708019335', '地形图测绘', '0', 13, '111', 142, 145, NULL, '2021-10-18', NULL, '2021-10-14', '2021-10-26', '2021-10-26', NULL, NULL, NULL, NULL, NULL, '6', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414490030081', '2021W34', '重庆经开区建成区场镇和小区内部排水管网精细化普查项目内窥检测', 138, '0', '1', '0275', '欧斌', '13608389083', '地下管线', '0', 13, '106', 142, 138, NULL, '2021-10-14', NULL, '2021-10-14', '2021-07-20', '2021-10-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414511001602', '2021C84', '波罗水电站白格滑坡体1:1000地形图测绘', 33, '0', '0', '0231', '陈长江', '13880616099', '地形图测绘', '0', 13, '110', 20, 33, NULL, '2021-10-13', NULL, '2021-10-13', '2021-10-18', '2021-10-22', NULL, 'uploadkmlFiles\\硬梁包控制点.kml', 'uploadkmlFiles\\测区范围线.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414527778817', '2021C85', '老木孔航电枢纽工程施工测量控制网建网及首次观测', 83, '1', '0', '0231', '罗勇', '13808211293', '施工测量控制网', '0', 13, '111', 142, 74, NULL, '2021-10-13', NULL, '2021-10-14', '2021-10-17', '2021-11-19', NULL, NULL, NULL, NULL, NULL, '7', '136', '57,59,49,50,53,18,60,55,58,51', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414544556034', '2021W37', '邻水县重点区域自然资源统一确权登记服务', 142, '0', '1', '0108', '杨俊', NULL, '确权登记项目', '0', 22, '106', 142, 142, NULL, '2021-10-12', NULL, '2021-10-12', '2021-10-15', '2023-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414565527553', '2021C83', '屏山抽水蓄能电站预可阶段测绘', 142, '0', '0', '0231', '袁有仓', '18121868058', '地形图测绘', '0', 7, '116', 20, 12, NULL, '2021-10-12', NULL, '2021-10-13', '2021-10-15', '2021-10-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414582304770', '2021W33', '若尔盖县唐克镇白河地形图测绘', 20, '1', '1', NULL, '昝鹏', '13982188793', '地形图测绘', '0', 22, '106', 20, 20, NULL, '2021-10-12', NULL, '2021-10-13', '2021-10-18', '2021-11-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414603276289', '2021W32', '国网羊湖发电公司压力钢管永久变形监测网校核项目', 102, '1', '1', '0087', NULL, NULL, '工程监测', '0', 13, '112', 142, 103, NULL, '2021-09-30', NULL, '2021-10-08', '2021-10-08', '2021-11-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414624247809', '2021C82', '广东南雄二期风电场项目地形图测绘工作', 101, '1', '0', '0238', '谷江波', '13981880241', '地形图测绘', '0', 13, '117', 142, 101, NULL, '2021-09-30', NULL, '2021-09-30', '2021-10-09', '2021-10-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414641025025', '2021C81', '雅鲁藏布江下游JW梯级水电站测绘工作', 33, '0', '0', '0231', '罗勇', '13808211293', '地形图测绘', '1', 13, '111', 142, 83, NULL, '2021-09-29', NULL, '2021-09-30', '2021-10-04', NULL, NULL, NULL, NULL, NULL, NULL, '3', '135', '88,98,158,150,147,143,151,152,156,149', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414657802242', '2021C79', '龚嘴水电站水库拦污栅段1:500地形图及横断面测绘', 61, '0', '0', '0231', '钟果', '13558898894', '地形图测绘', '0', 13, '110,111', 142, NULL, NULL, '2021-09-28', NULL, '2021-09-29', '2021-10-12', '2021-11-23', NULL, NULL, 'uploadkmlFiles\\永善公路激光采集范围_2000_105.kml', NULL, NULL, '7', '75', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414674579458', '2021C80', '老鹰岩水电站小水工业区外部供水地形图测量', 83, '0', '0', '0227', '唐中强', '18030805232', '地形图测绘', '0', 13, '110,111', 142, 145, NULL, '2021-09-28', NULL, '2021-09-29', '2021-10-08', '2021-12-06', NULL, 'uploadkmlFiles\\2022C15孟底沟水电站场内交通左岸、右岸公路工程项目测量范围+控制点.kml', 'uploadkmlFiles\\2022C15孟底沟水电站场内交通左岸、右岸公路工程项目测量范围+控制点.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414695550978', '2021C78', '波罗水电站（白玉县）农村集中安置点、集镇和污水处理厂迁复建初拟选址测绘工作', 15, '0', '0', '0227', '郑萍伟', '13882289003', '地形图测绘', '0', 13, '115', 142, 144, NULL, '2021-09-18', NULL, '2021-09-18', '2021-09-25', '2021-10-14', 'CGCS2000，85高程基准。居民点和集镇新址：场地内部1:500，外部供水线路和外部道路：1：2000，取水口1：500', NULL, NULL, NULL, NULL, '14', '132', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414712328193', '2021C77', '牙根一级水电站（基础设施分公司）零星1:2000地形图测量', 122, '0', '1', '0229', '卜繁健', '13708088182', '地形图测绘', '0', 13, '201', 142, 122, NULL, '2021-09-15', NULL, '2021-09-16', '2021-09-17', '2021-09-21', '下列序号与附件图中地块编号匹配，测绘内容请与用户再核实。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414729105410', '2021C76', '老鹰岩什月河地形图测绘', 83, '0', '0', '0227', '唐中强', '18030805232', '地形图测绘', '0', 13, '111', 142, 83, NULL, '2021-09-08', NULL, '2021-09-09', '2021-09-12', '2021-09-13', '国家2000/85高程基准', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414750076930', '2021C75', '紫霞水电站界桩测设技术服务', 61, '0', '0', '0227', '汪奎', '18328718961', '界桩测设', '0', 22, '111', 20, 61, NULL, '2021-09-07', NULL, '2021-09-23', '2022-03-18', '2022-04-28', NULL, NULL, NULL, '94.16183077', '30.6154978', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414775242753', '2021C74', '波罗水电站昌都市示范区测量项目', 61, '0', '0', '0227', '欧铁成', '13118106872', '地形图测绘', '0', 22, '111', 142, 71, NULL, '2021-09-03', NULL, '2021-09-07', '2021-09-09', NULL, 'cgcs2000，1985国家高程基准', NULL, 'uploadkmlFiles\\宜宾蟠龙2000测图范围-105.kml', NULL, NULL, '2', '131', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414796214274', '2021C73', '长河坝水电站新联土料场复垦地形图补充测绘', 33, '0', '0', '0227', '李强', '18215505713', '地形图测绘', '0', 13, '110', 142, 33, NULL, '2021-09-01', NULL, '2021-09-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414812991489', '2021C72', '江油抽水蓄能电站预可阶段测绘', 15, '1', '0', '0231', '袁有仓', '18682751096', '地形图测绘', '0', 7, '115', 20, 15, NULL, '2021-08-31', NULL, '2021-08-31', '2021-09-06', '2021-09-13', '现场做几个五等控制点（埋石或刻石）', NULL, NULL, '104.57670508416088', '31.759501691118206', '5', '130', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414859128834', '2021C106', '老鹰岩水电站视频航飞', 95, '0', '0', '0231', '罗勇', '13808211293', '航拍视频', '0', 13, '111', 20, 95, NULL, '2021-08-31', NULL, '2021-09-01', '2021-08-31', '2021-09-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414880100353', '2021C71', '2021年度地震（次生地质灾害）应急桌面演练', 61, '0', '0', '0233', '袁有仓', '18682751096', '三维模型及视频制作', '0', 13, '108,111', 142, 61, NULL, '2021-08-24', NULL, '2021-08-24', '2021-08-21', NULL, NULL, NULL, NULL, NULL, NULL, '3', '135', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414905266178', '2021C70', '泸定华电营地及武警中队地形图测量', 33, '0', '0', '0227', '谢刚', '15882783788', '地形图测绘', '0', 13, '111', 142, 145, NULL, '2021-08-23', NULL, '2021-08-24', '2021-09-01', '2021-09-05', NULL, NULL, NULL, '102.22343059779628', '29.930407523274795', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414926237697', '2021C69', 'ML水库电站测绘工作', 61, '0', '0', '0231', '罗勇', '13808211293', '地形图测绘', '1', 13, '110,111,107', 142, 61, NULL, '2021-08-23', NULL, '2021-08-23', '2021-09-15', '2022-03-25', NULL, NULL, NULL, NULL, NULL, '5', '130', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414951403522', '2021C68', '叶巴滩混蓄预可研阶段1:1000地形图及断面测绘', 83, '0', '0', '0231', '蒙富强、王锐、罗勇', '13547829339、18086831070', '地形图测绘', '0', 13, '110,111', 142, 83, NULL, '2021-08-19', NULL, '2021-08-19', '2021-08-24', '2021-09-01', '蒙富强（地形图用户）、王锐（断面用户），拉哇库尾地形图需测水下地形', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881414976569346', '2021C67', '绵竹抽水蓄能电站预可阶段测绘', NULL, '0', '0', '0231', '袁有仓', '18682751096', '地形图测绘', '0', 7, '111,115', 142, 15, NULL, '2021-08-13', NULL, '2021-08-16', '2021-08-17', '2021-09-03', '现场做几个五等控制点（埋石或刻石）', NULL, NULL, NULL, NULL, '7', '75', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415001735169', '2021C66', '溪洛渡水电站云南库区新增影响区实物指标调查', 83, '0', '0', '0227', '闫文益', '18121861225', '配合测量', '0', 22, '111', 142, NULL, NULL, '2021-08-12', NULL, '2021-08-12', '2021-08-17', '2021-08-20', '现场负责人：周显雨，联系电话：13887074308', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415026900993', '2021W30', '沐川县林权登记数据整合建库项目', 81, '0', '1', '0114', '夏主任', '13378338699', '确权登记项目', '0', 13, '108', 142, 81, NULL, '2021-08-11', NULL, '2021-08-11', '2021-08-12', '2021-12-01', '毛主任（具体负责该项目）：13908135075', NULL, 'uploadkmlFiles\\2021C88南江抽水蓄能电站预科阶段地形图控制点.kml', NULL, NULL, '5', '130', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415047872514', '2021C65', '道孚抽水蓄能电站预可阶段测绘', 33, '0', '0', '0231', '袁有仓', '18121868058', '地形图测绘', '0', 7, '110,111', 142, 83, NULL, '2021-08-10', NULL, '2021-08-11', '2021-08-18', '2021-09-05', '现场做几个五等控制点（埋石或刻石）', NULL, NULL, '101.34122349771388', '30.521993933142433', '14', '75', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415064649729', '2021C64', '芦山抽水蓄能电站预可阶段测绘', 61, '0', '0', '0231', '袁有仓', '18682751096', '地形图测绘', '0', 7, '110,111', 142, 61, NULL, '2021-08-09', NULL, '2021-08-10', '2021-08-10', '2021-08-11', '项目区内做几个五等点（刻石或埋石）', NULL, 'uploadkmlFiles\\2022C23激光采集范围_2000_105.kmL', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415186284546', '2021C63', '长河坝牛棚子沟1:500地形图测绘', 83, '0', '0', '0227', '黄晨', '13882264807', '地形图测绘', '0', 13, '110,111', 142, NULL, NULL, '2021-08-06', NULL, '2021-08-10', '2021-08-11', '2021-08-16', '17739888133师伟雄 （现场负责人），周二、周三到姑咱', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415219838978', '2021W29', '都江堰市地下管线普查成果更新项目监理', 49, '0', '1', '0046', '贾秋容', '18428322738', '地下管线', '0', 13, '109', 142, 49, NULL, '2021-08-06', NULL, '2021-08-10', '2021-08-09', '2022-12-31', NULL, NULL, 'uploadkmlFiles\\2021C90易贡藏布亚龙水电站预可阶段测绘技术服务项目.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415240810497', '2021C62', '孟底沟水电站伍须海—上团乡—孟底沟通乡通村公路改建工程施工图测量放线', 94, '0', '0', '0229', '李任华', '13980088186', '公路测量', '0', 13, '111', 142, 94, NULL, '2021-08-06', NULL, '2021-08-10', '2021-08-13', '2021-09-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415265976322', '2021C61', '攀枝花抽水蓄能电站预可阶段测绘', NULL, '0', '0', '0233', '袁有仓', '18682751096', '地形图测绘', '0', 13, '110,111', 20, NULL, NULL, '2021-08-02', NULL, '2021-08-03', '2021-08-10', '2021-08-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415286947841', '2021C58', '牙根二级水电站（预可阶段）地形地类图测绘', 33, '0', '0', '0231', '干尚伟', '13980874941', '地形图测绘', '0', 13, '110,111', 142, 33, NULL, '2021-07-26', NULL, '2021-07-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '4', '136', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415316307970', '2021C60', 'YX项目坐标转换', 47, '0', '0', '0231', '龚静', '15982052981', '坐标转换', '0', 13, '106', 142, 47, NULL, '2021-07-26', NULL, '2021-07-27', NULL, NULL, NULL, 'uploadkmlFiles\\江门-激光采集范围-CGCS2000-高斯投影3度带-中央经线114°.kml', 'uploadkmlFiles\\江门-激光采集范围-CGCS2000-高斯投影3度带-中央经线114°.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415333085186', '2021C59', '波罗坝址区三维地形面制作', 39, '1', '0', '0231', '陈长江', '13880616099', '三维地形面', '0', 13, '108', 142, 39, NULL, '2021-07-26', NULL, '2021-07-27', '2021-07-26', '2021-07-30', '暂不需提交贯标资料', NULL, 'uploadkmlFiles\\2022C29-雅安市名山区百丈镇临溪河综合整治项目地形图测绘.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415349862402', '2021W27', '泸县自然资源（九曲河）确权登记项目政府采购合同', 59, '0', '1', '0111', NULL, NULL, '河湖划界', '0', 13, '106', 142, 59, NULL, '2021-07-26', NULL, '2021-07-27', '2020-12-15', '2021-01-08', '补登记', 'uploadkmlFiles\\2021C89芦山抽蓄水电站控制点成果（G2000,1985高）.kml', 'uploadkmlFiles\\2023C38-川藏（雅安）工业园区范围线.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415362445314', '2021W28', '泸县2020年度国土变更调查采购合同', 59, '0', '1', '0111', NULL, NULL, '国土变更调查', '0', 13, '106', 142, 59, NULL, '2021-07-26', NULL, '2021-07-27', '2021-01-15', '2021-08-05', '补登记', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415375028225', '2021C57', '雅砻江公司色戈光伏项目地形图测绘工作', 83, '0', '0', '0238', '屈宋源、吴迪', '13666266544、18581866605', '地形图测绘', '0', 13, '111', 142, 83, NULL, '2021-07-25', NULL, '2021-07-26', '2021-07-25', '2021-07-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415395999745', '2021W26', '四川省达州市达州绕城高速公路测绘项目', 15, '0', '1', '0007', NULL, NULL, '地形图测绘', '0', 13, '115,107', 142, 15, NULL, '2021-07-25', NULL, '2021-07-26', '2021-07-12', '2021-09-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415412776962', '2021C56', '老木孔航电枢纽工程地形图及断面测量', 83, '0', '0', '0231', '罗勇、石太军', '13808211293、13980519026', '地形图测绘', '0', 13, '110,111', 142, 83, NULL, '2021-07-22', NULL, '2021-07-27', '2021-08-17', NULL, '与2021C27合并提交相关成果及报告', NULL, 'uploadkmlFiles\\2022C32-龚嘴电站鱼道工程渣场地形图测量.kml', NULL, NULL, NULL, NULL, '109,18,31,140', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415429554178', '2021C55', '牙根一级昆地1:500地形地类图测量', 33, '0', '0', '0227', '金永刚', '13880926612', '地形图测绘', '0', 13, '110,201', 142, 122, NULL, '2021-07-21', NULL, '2021-07-27', '2021-07-28', '2021-08-01', '雅砻江坐标系牙根一级投影面', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415446331394', '2021C54', '官地水电站打罗沟、金打公路K6+750、西侧沟泥石流治理项目', NULL, '0', '0', '0231', '罗勇、杨寿成', '13808211293、13308066147', '地形图测绘', '0', 13, '110,111', 142, NULL, NULL, '2021-07-16', NULL, '2021-07-20', '2021-07-21', '2021-07-26', '范围需与用户确认', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415458914305', '2021C53', '大邑县抽水蓄能电站地形测绘', 61, '0', '0', '0233', '袁有仓', '18682751096', '地形图测绘', '0', 7, '111', 142, 61, NULL, '2021-07-13', NULL, '2021-07-13', '2021-07-27', '2021-07-30', NULL, NULL, 'uploadkmlFiles\\武侯厂房范围.kml', '103.37400574', '30.65259557', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415475691522', '2021W24', '成彭快速路地形图测绘项目', 32, '0', '1', '0022', '刘媛媛', '18280462009', '公路测量', '0', 7, '110,111,107', 142, 32, NULL, '2021-07-13', NULL, '2021-07-13', '2021-07-15', '2021-08-26', NULL, NULL, NULL, '104.058749', '30.947058', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415492468738', '2021W25', '确如多水电站施工控制网测量', 101, '1', '1', '0102', '倪道明', '17781696625', '施工测量控制网', '0', 13, '112', 142, 101, NULL, '2021-07-13', NULL, '2021-07-13', '2021-07-15', '2021-07-31', '甲方技术顾问牟敦伟15228801966', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415513440258', '2021W23', 'G4216线屏山新市至金阳段永善支线地形图补测测绘', 33, '0', '1', '0240', '施方', '15990110806', '地形图测绘', '0', 13, '110', 142, 33, NULL, '2021-07-06', NULL, '2021-07-07', '2021-07-07', '2021-07-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415530217473', '2021C52', '猴子岩水电站孔玉乡折洛沟供水工程地形图测绘', NULL, '0', '0', '0227', '李强', '18215505713', '地形图测绘', '0', 13, '111', 142, NULL, NULL, '2021-07-06', NULL, '2021-07-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415551188994', '2021C51', '老鹰岩水电站小水迁建企业地形图测量', 61, '0', '0', '0227', '潘飞', '18682755410', '地形图测绘', '0', 13, '111', 142, 61, NULL, '2021-07-01', NULL, '2021-07-02', '2021-07-01', '2021-07-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415567966210', '2021C50', '叶巴滩水电站降曲河1:1000地形测量、实景三维模型制作等', 83, '0', '0', '0231', '罗勇、李华', '13808211293、13668286690', '地形图测绘、三维模型制作及坐标转换', '0', 13, '108,110,111', 20, 83, NULL, '2021-06-28', NULL, '2021-06-30', '2021-07-05', '2021-07-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415588937730', '2021W22', '云南双江至澜沧高速公路地形图测绘', 61, '0', '1', '0185', '黄梅琳', '18602830814', '公路测量', '0', 22, '111,107', 142, 61, NULL, '2021-06-24', NULL, '2021-06-24', '2021-06-28', '2021-07-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415609909250', '2021W21', '贵州省乌当(羊昌)至平塘高速公路地形图补测', 33, '0', '1', '0076', '何正海', '13595100604', '地形图数字化', '0', 13, '110', 142, 33, NULL, '2021-06-22', NULL, '2021-06-22', '2021-06-23', '2021-06-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415630880769', '2021C49', '老鹰岩水电站垫高防护区1:1000地形图测绘', 61, '0', '0', '0227', '潘飞', '18682755410', '地形图测绘', '0', 13, '111', 20, 145, NULL, '2021-06-22', NULL, '2021-06-22', '2021-06-24', '2021-06-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415647657985', '2021W20', '广东韶关南水湖1:1000地形图入库', 33, '1', '1', '0071', '杨映波', '18023682109', '地形图测绘', '0', 24, '110', 142, 33, NULL, '2021-06-16', NULL, '2021-06-21', '2021-06-11', '2021-06-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415668629506', '2021C48', '老鹰岩水电站礼约河1:2000地形图测绘', 61, '0', '0', '0231', '罗勇、卫文', '13808211293、13880903448', '地形图测绘', '0', 13, '110,111', 142, 61, NULL, '2021-06-02', NULL, '2021-06-04', '2021-06-09', '2021-07-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415685406721', '2021C47', '双江航电枢纽工程初步设计阶段枢纽工程三维地形面制作', 33, '0', '0', '0226', '罗勇', '13808211293', '三维地形面', '0', 13, '110', 20, 33, NULL, '2021-06-01', NULL, '2021-06-01', '2021-06-02', '2021-06-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415706378241', '2021C46', '孟底沟水电站可研阶段坐标转换', 47, '0', '0', '0226', '干尚伟', '13980874941', '坐标转换', '0', 13, '106', 20, 47, NULL, '2021-05-31', NULL, '2021-06-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415727349761', '2021C45', '龚嘴水电站、铜街子水电站补充测绘', 61, '0', '0', '0231', '罗勇、李治国', '13808211293、13036671005', '地形图测绘', '0', 22, '111', 142, 61, NULL, '2021-05-24', NULL, '2021-05-26', '2021-05-27', '2021-05-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415748321281', '2021C44', '康定市孔玉乡泥洛河坝、菩提河坝、折洛沟新取水口及引水线路等测绘', 101, '1', '0', '0227', '金勇', '13550046031', '地形图测绘', '0', 13, '112', 20, 101, NULL, '2021-05-14', NULL, '2021-05-19', '2021-05-24', '2021-05-28', NULL, 'uploadkmlFiles\\左权图根点cgcs2000_114.kml', 'uploadkmlFiles\\左权箕山抽蓄测绘范围.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415765098497', '2021W18', '广安石鼓村灰场环保整治项目“临时封场”1:500地形图测绘', 20, '0', '1', '0245', '周志川', '13990576708', '地形图测绘', '0', 20, '106', 142, 20, NULL, '2021-05-11', NULL, '2021-05-11', '2021-05-12', '2021-05-17', NULL, 'uploadkmlFiles\\2021C100控制点经纬度单位度.kml', 'uploadkmlFiles\\2021C100测区范围线.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415781875714', '2021W19', '卡基娃水电站升压站1:500地形图', 142, '0', '1', '0102', '倪道明', '17781696625', '地形图测绘', '0', 20, '106', 142, NULL, NULL, '2021-05-11', NULL, '2021-05-17', '2021-05-14', '2021-05-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415798652929', '2021C41', '牙根二级水电站（预可阶段）地形地类图测绘（A186KX-2021-05）', 20, '0', '0', '0231', '干尚伟', '13980874941', '地形图测绘', '0', 13, '106', 20, NULL, NULL, '2021-05-07', NULL, '2021-05-08', '2021-05-20', '2021-05-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415815430146', '2021C40', '重庆轨道交通4号线西延伸段工程施工监测及控制测量', 138, '0', '0', '0233', '冯立', '18782921362', '工程监测', '1', 13, '106', 142, 138, NULL, '2021-05-06', NULL, '2021-05-06', '2021-05-07', '2024-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '72,73,78,232,98,231,20,65', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415832207361', '2021W17', '曲松光伏一号场址地形图测绘项目', 83, '0', '1', '0237', '姚利平', '15883628192', '地形图测绘', '0', 13, '111', 142, 83, NULL, '2021-04-30', NULL, '2021-04-30', '2021-04-30', '2021-05-18', '华电郑红伟139 9040 3865', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415844790273', '2021C39', '米林水电站移民安置点1:2000地形地类图测绘', 83, '0', '0', '0231', '汪奎', '18328718961', '地形图测绘', '0', 20, '111,115', 142, 83, NULL, '2021-04-28', NULL, '2021-04-29', '2021-04-20', '2021-05-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415861567490', '2021C37', '双江口水电站直波大地安置点垫高防护工程行洪论证河段断面测量', 139, '0', '0', '0227', '李美蓉', '15708470028', '断面', '0', 20, '110,111', 142, 139, NULL, '2021-04-21', NULL, '2021-04-21', '2021-05-01', '2021-05-03', NULL, 'uploadkmlFiles\\广西上林抽水蓄能电站控制点.kml', 'uploadkmlFiles\\上林激光采集范围.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415878344705', '2021C38', 'YX项目2021年地形图测绘', 33, '0', '0', '0231', '周湘山', '13668278226', '地形图测绘', '0', 20, '110,111,115', 142, 83, NULL, '2021-04-21', NULL, '2021-04-29', '2021-04-20', '2021-06-30', '无变动区域2021.5.14提交DLG成果资料，有变动区域2021.6.30提交', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415895121921', '2021C42', '老鹰岩一级水电站可行性研究阶段界桩测设项目', 61, '0', '0', '0231', '罗勇、张罗彬', '13808211293、13980818187', '界桩测设', '0', 22, '111', 142, 61, NULL, '2021-04-20', NULL, '2021-05-08', '2021-05-11', NULL, NULL, NULL, NULL, NULL, NULL, '3', '135', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415911899138', '2021C43', '老鹰岩二级水电站可行性研究阶段界桩测设项目', 61, '0', '0', '0231', '罗勇、张罗彬', '13808211293、13980818187', '界桩测设', '0', 22, '111', 142, 61, NULL, '2021-04-20', NULL, '2021-05-08', '2021-05-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415932870657', '2021C36', '黄金坪水电站孙家沟实物指标配合测量', 145, '0', '0', '0227', '张波', '13708019335', '实物指标配合测量', '0', 20, '111', 142, 145, NULL, '2021-04-19', NULL, '2021-04-19', '2021-04-20', '2021-04-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415949647874', '2021C35', '溪洛渡水电站永善库区新增滑坡影响区实物指标调查配合测量', 83, '0', '0', '0227', '闫文益', '18121861225', '实物指标配合测量', '0', 20, '111', 142, NULL, NULL, '2021-04-19', NULL, '2021-04-19', '2021-04-26', '2021-06-30', NULL, 'uploadkmlFiles\\八曲抽水蓄能电站控制点.kml', 'uploadkmlFiles\\八曲抽水蓄能2000范围.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415962230785', '2021C32', '孟底沟水电站施工图公路中桩放线测量', 71, '1', '0', '0229', '李任华', '13980088186', '公路测量', '0', 20, '111', 142, 71, NULL, '2021-04-16', NULL, '2021-04-19', '2021-04-21', '2021-04-29', NULL, 'uploadkmlFiles\\广西上林抽水蓄能电站控制点.kml', 'uploadkmlFiles\\2022C52-成图范围线.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415979008002', '2021C33', '天星坝水库施工测量控制网枢纽区控制点重建', 101, '1', '0', '0227', '欧玉鹏', '13688028219', '施工测量控制网', '0', 20, '112', 142, 101, NULL, '2021-04-16', NULL, '2021-04-19', '2021-04-17', '2021-05-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881415991590913', '2021C34', '老鹰岩一二级水电站航拍及DOM制作', 39, '1', '0', '0227', '潘飞', '18682755410', '正射影像图DOM', '0', 20, '107,108', 142, 39, NULL, '2021-04-16', NULL, '2021-04-19', '2021-04-21', '2021-04-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416012562433', '2021C31', '雅鲁藏布江截弯梯级电站多雄拉越岭隧道范围1：2000地类地形图', 33, '0', '0', '0226', '魏翻', '15908179959', '地形图测绘', '0', 22, '110,111', 142, 83, NULL, '2021-04-14', NULL, '2021-04-14', '2021-04-26', '2021-07-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416029339649', '2021C29', '绰斯甲水电站断面及地形图测绘', 139, '0', '0', '0231', '何富刚', '19181791727', '地形图测绘', '0', 20, '111', 142, 139, NULL, '2021-04-13', NULL, '2021-04-14', '2021-04-20', '2021-05-01', NULL, 'uploadkmlFiles\\广西上林抽水蓄能电站控制点.kml', 'uploadkmlFiles\\2022C54四川省攀枝花三峡光伏发电项目1：500测绘（正式图）范围线（包含新增）-CGCS2000-102°.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416046116866', '2021C30', '双江口水电站雾化区DOM制作及坐标转换', 33, '0', '0', '0231', '李永红', '18980568118', '坐标转换', '0', 20, '110,106', 142, 33, NULL, '2021-04-13', NULL, '2021-04-14', '2021-04-19', '2021-04-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416062894082', '2021C28', '革什扎河大桑水电站及二瓦槽水电站坐标转换', 101, '1', '0', '0231', '庞明亮', '13880197908', '坐标转换', '0', 20, '112', 142, 101, NULL, '2021-04-13', NULL, '2021-04-14', '2021-04-16', '2021-04-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416083865601', '2019W37', '双江口水电站枢纽工程上下游河道1：1000地形图测绘', 120, '0', '1', '0078', NULL, NULL, '地形图测绘', '0', 22, '202', 142, 120, NULL, '2021-04-09', NULL, '2021-04-12', '2018-09-26', '2018-10-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416100642818', '2021C27', '老木孔水电站乌尤寺水文站高程系统转换', 138, '0', '0', '0231', '宋旭燕', '13438455246', '高程转换', '0', 20, '106', 142, 138, NULL, '2021-04-02', NULL, '2021-04-09', NULL, NULL, NULL, 'uploadkmlFiles\\图根点.kml', 'uploadkmlFiles\\博州-激光采集范围线_CGCS2000-高斯投影3度带-中央经线81°.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416117420033', '2021C26', '雅砻江两河口水电站红顶村至红顶集镇1:1000地形图测绘', 122, '0', '0', '0225', '李建斌', '18381453118', '地形图测绘', '0', 20, '201', 142, 122, NULL, '2021-03-25', NULL, '2021-03-29', '2021-03-27', '2021-03-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416130002945', '2021W15', '云南省屏边县至河口高速公路地形图补充测绘', NULL, '0', '1', '0240', '施方', '15990110806', '地形图测绘', '0', 22, '111', 142, NULL, NULL, '2021-03-23', NULL, '2021-03-29', '2021-04-01', '2021-05-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416146780162', '2021W16', '云南省南涧至云县高速公路地形图补充测绘', NULL, '0', '1', '0240', '柯尊达', '13858093421', '地形图测绘', '0', 22, '111', 20, NULL, NULL, '2021-03-23', NULL, '2021-03-25', '2021-04-18', '2021-04-25', NULL, NULL, NULL, '100.4588503', '24.73509684', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416163557378', '2021C25', '孟底沟水电站八窝龙1:500地形图测绘及坐标转换', 83, '0', '0', '0231', '梅稚平', '15881001826', '地形图测绘', '0', 20, '110,111', 142, 95, NULL, '2021-03-19', NULL, '2021-03-22', '2021-03-24', '2021-03-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416184528898', '2021W14', '关河（盐津县豆沙镇林家渡段）、横江（盐津县马岭岩段）河道治理工程工程区地形测量', 138, '0', '1', '0241', '武致宇', '15528081308', '地形图测绘', '0', 22, '106', 142, 138, NULL, '2021-03-17', NULL, '2021-03-22', '2021-03-23', '2021-04-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416197111809', '2021C24', '西藏米林坝下-尼洋河口-直白段1:1000地形图及1:2000地形图测绘', 83, '0', '0', '0234', '张磊', '15196577699', '地形图测绘', '0', 22, '110,111', 142, 83, NULL, '2021-03-16', NULL, '2021-03-17', '2021-03-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416213889025', '2021C23', '雅鲁藏布江米林水电站可研阶段地形地类图测绘', 33, '0', '0', '0231', '杨锐', '15208223387', '地形图测绘', '0', 20, '110,111', 142, 83, NULL, '2021-03-16', NULL, '2021-03-16', '2021-04-18', '2021-04-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416226471938', '2021C20', '猴子岩水电站岩角坝土料场地形图测绘', 101, '1', '0', '0227', '张波', '13708019335', '地形图测绘', '0', 20, '112', 10, 101, NULL, '2021-03-10', NULL, '2021-03-10', '2021-03-17', '2021-03-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416243249154', '2021W13', '四川省石棉县新民乡足富大理石矿勘查服务项目测绘服务', 35, '0', '1', '0174', '何洮', '15198176579', '地形图测绘', '0', 22, '111', 10, 35, NULL, '2021-03-10', NULL, '2021-03-10', '2021-03-11', '2021-03-17', NULL, NULL, NULL, NULL, NULL, '3', '135', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416260026369', '2021C21', '川藏铁路康定市升航村大坡地安置点地形图测绘', 101, '1', '0', '0227', '张波', '13708019335', '地形图测绘', '0', 20, '112', 10, 101, NULL, '2021-03-10', NULL, '2021-03-10', '2021-04-02', '2021-04-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416276803586', '2021C22', '长河坝水电站磨子沟、金汤小学地形图测绘', 101, '1', '0', '0227', '张波', '13708019335', '地形图测绘', '0', 20, '112', 10, 101, NULL, '2021-03-10', NULL, '2021-03-10', '2021-03-18', '2021-03-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416293580802', '2021C19', '硬梁包水电站扯索坝、二里坝、冷碛地形图测绘', 101, '1', '0', '0227', '李强', '18215505713', '地形图测绘', '0', 20, '112', 10, 101, NULL, '2021-03-09', NULL, '2021-03-10', '2021-03-08', '2021-03-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416310358017', '2021C18', '长河坝水电站新联土料场复垦地形图测绘', 101, '1', '0', '0227', '李强', '18215505713', '地形图测绘', '0', 20, '112', 10, 101, NULL, '2021-03-09', NULL, '2021-03-10', '2021-03-08', '2021-03-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416327135233', '2021C16', '西藏紫霞水电站公路配合测量', 83, '0', '0', '0229', '高绍清', '13547966733', '配合测量', '0', 20, '111', 10, 74, NULL, '2021-03-03', NULL, '2021-03-04', '2021-03-13', '2021-03-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416343912449', '2021C17', '牙根一级水电站产卵场1:1000水下地形图测绘', 122, '0', '0', '0231', '张伟', '13689015389', '地形图测绘', '0', 20, '201', 10, 122, NULL, '2021-03-03', NULL, '2021-03-03', '2021-03-07', '2021-03-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416360689665', '2021C15', '瀑布沟水电站武警营房扩建等1:500地形图', NULL, '0', '0', '0231', '帅畅', '18228545191', '地形图测绘', '0', 20, '111', 10, NULL, NULL, '2021-02-24', NULL, '2021-02-26', '2021-03-01', '2021-03-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416377466882', '2021C14', '波罗水电站建设征地界桩测设', 138, '0', '0', '0233', '冯立', '18782921362', '界桩测设', '0', 20, '106', 10, 138, NULL, '2021-02-24', NULL, '2021-03-03', '2021-03-04', '2021-10-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416394244098', '2021C13', '双江口水电站双柏树1:1000地形图补测', 121, '0', '0', '0227', '王铁虎', '13980726634', '地形图测绘', '0', 20, '203', 10, 121, NULL, '2021-02-07', NULL, '2021-02-07', '2021-02-17', '2021-02-22', NULL, NULL, 'uploadkmlFiles\\范围线-CGCS2000-111.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416411021314', '2021C11', '雅江水电站加深研究阶段1:2000地形地类图测绘', 61, '0', '0', '0231', '李青春', '13908092616', '地形图测绘', '0', 20, '110,111', 10, 61, NULL, '2021-02-01', NULL, '2021-02-01', '2021-02-05', '2021-04-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416427798530', '2021C09', '雅鲁藏布江下游希让水电站水库区坝址区地形图测绘', 61, '0', '0', '0231', '邹子南', '13548039577', '地形图测绘', '0', 20, '111', 10, 61, NULL, '2021-02-01', NULL, '2021-02-01', '2021-02-05', '2021-04-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416444575746', '2021C12', '玉松水库电站加深研究阶段1:2000地形地类图测绘（第一批次）', 61, '0', '0', '0231', '李青春', '13908092616', '地形图测绘', '0', 20, '110,111', 10, 61, NULL, '2021-02-01', NULL, '2021-02-01', '2021-04-15', '2021-04-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416465547266', '2021C10', '阿尼桥水电站加深研究阶段1:2000地形地类图测绘', 61, '0', '0', '0231', '李青春', '13908092616', '地形图测绘', '0', 20, '110,111', 10, 61, NULL, '2021-02-01', NULL, '2021-02-01', '2021-02-05', '2021-05-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416482324482', '2021W12', '老挝国家高速公路网磨丁至会晒段勘察设计合同', NULL, '1', '1', '0216', NULL, NULL, '地形图测绘', '0', 22, '107', 10, NULL, NULL, '2021-01-29', NULL, '2021-02-02', '2021-01-29', '2021-03-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416499101698', '2021C08', '加查水电站土地复垦新增料场地形图测绘', 61, '0', '0', '0227', '陈林', '13730663670', '地形图测绘', '0', 20, '111', 10, 35, NULL, '2021-01-22', NULL, '2021-01-27', '2021-01-27', '2021-02-03', NULL, NULL, 'uploadkmlFiles\\牛栏坑测量范围1020.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416520073217', '2021W11', '湾东水电站、河口水电站复核测量', NULL, '0', '1', '0109,0110', NULL, NULL, '其它测绘项目', '0', 22, '111', 10, NULL, NULL, '2021-01-20', NULL, '2021-02-02', '2021-01-29', '2021-02-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416536850434', '2021C07', '溪洛渡水电站施工图阶段公路地形图测绘', 138, '0', '0', '0229', '高绍清', '13547966733', '地形图测绘', '0', 20, '106', 13, 138, NULL, '2021-01-19', NULL, '2021-01-19', NULL, NULL, '尽量安排1月25日进场', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416557821953', '2021W09', '雅砻江桐子林水电站大坝外部变形和近坝区滑坡体观测（2021年）', 102, '1', '1', '0202', '高翠峰', '0812-3331998', '工程监测', '0', 22, '112', 10, 102, NULL, '2021-01-14', NULL, '2021-01-15', '2021-01-01', '2021-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416578793474', '2021W08', '雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测（2021年）', 102, '1', '1', '0200', '高翠峰', NULL, '工程监测', '0', 22, '112', 10, 102, NULL, '2021-01-14', NULL, '2021-01-15', '2021-01-01', '2021-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416603959298', '2021C06', '拉萨河达孜区河段二维流场分析研究地形图测绘', 83, '0', '0', '0237', '高红涛', '18780247630', '地形图测绘', '0', 20, '111', 10, 95, NULL, '2021-01-14', NULL, '2021-01-18', '2021-01-19', '2021-01-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416620736513', '2021W10', '雅安市名山区水利局河流河道管理范围划界项目', 21, '0', '1', '0199', NULL, NULL, '河湖划界', '0', 21, '105', 13, 21, NULL, '2021-01-14', NULL, '2021-01-22', '2020-09-09', '2021-07-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416641708034', '2021W07', '大渡河猴子岩水电站外部变形监测工程（2021年）', 101, '1', '1', '0080', '唐珂', '18190776696', '工程监测', '0', 22, '112', 10, 101, NULL, '2021-01-14', NULL, '2021-01-15', '2021-01-01', '2021-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416658485250', '2021C05', '雅鲁藏布江下游环境敏感区GIS层转换到CAD图层', 47, '0', '0', '0231', '赵桂连', '13981810917', '坐标转换', '0', 20, '106', 13, NULL, NULL, '2021-01-13', NULL, '2021-01-22', '2021-01-07', '2021-02-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416679456770', '2021W06', '四川省脚木足河巴拉水电站工程测量中心技术服务(2021年)', 120, '0', '1', '0186', NULL, NULL, '工程测量中心', '0', 15, '202', 10, 120, NULL, '2021-01-13', NULL, '2021-03-12', '2020-12-01', '2025-12-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416700428290', '2021C03', '孟底沟水电站库区、工程区、料场等地形图坐标转换', 47, '0', '0', '0231', '蔡翔', '18502852109', '坐标转换', '0', 20, '106', 13, NULL, NULL, '2021-01-13', NULL, '2021-01-22', '2021-01-13', '2021-01-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416721399809', '2021C04', '汉源县移民后续项目地形图测绘', 61, '0', '0', '0227', '梁炎', '13908183297', '地形图测绘', '0', 20, '111,107', 10, 61, NULL, '2021-01-13', NULL, '2021-01-13', '2021-01-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416742371330', '2021W05', '四川省脚木足河巴拉水电站工程区内原始地形图测绘', 33, '0', '1', '0186', NULL, NULL, '地形图测绘', '0', 15, '110,204', 10, 120, NULL, '2021-01-13', NULL, '2021-01-14', '2021-02-07', '2021-02-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416759148545', '2021C02', '龚嘴、铜街子水电站1:1000地形图测绘', 61, '0', '0', '0231', '李治国', '13036671005/87399813', '地形图测绘', '0', 20, '111', 10, 61, NULL, '2021-01-11', NULL, '2021-01-12', '2021-01-25', '2021-01-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416792702977', '2021C01', '牙根二级水电站地形图测绘', 144, '0', '0', '0231', '刘思丁', '13880826590', '地形图测绘', '0', 20, '111', 10, 144, NULL, '2021-01-11', NULL, '2021-01-11', '2021-01-16', '2021-01-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416830451713', '2021W02', '四川省雅砻江两河口水电站工程测量中心服务（2021年）', 122, '0', '1', '0200', NULL, NULL, '工程测量中心', '0', 22, '201', 10, 122, NULL, '2021-01-08', NULL, '2021-01-08', '2021-01-01', '2021-12-31', NULL, NULL, 'uploadkmlFiles\\2022C03点云有效范围_CGCS2000_105.kmL', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416864006146', '2021W03', '四川大渡河双江口水电站枢纽工程测量中心服务（2021年）', 120, '0', '1', '0159', NULL, NULL, '工程测量中心', '0', 22, '202', 10, 120, NULL, '2021-01-08', NULL, '2021-01-08', NULL, NULL, '四川大渡河双江口水电站枢纽工程测绘技术服务合同', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416901754881', '2021W04', '泸定川藏铁路大桥机载激光扫描', NULL, '1', '1', '0207', '潘文斌', '18113136010', '激光扫描', '0', 22, '107', 10, NULL, NULL, '2021-01-06', NULL, '2021-01-11', '2021-01-08', '2021-01-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416935309313', '2021W01', '雅砻江桐子林水电站水库泥沙断面测量（2021年）', NULL, '0', '1', '0202', '高翠峰', '0812-3331998', '泥沙监测', '0', 15, '111', 10, NULL, NULL, '2021-01-04', NULL, '2021-01-05', '2021-01-08', '2021-01-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881416973058050', '2020C66', '大渡河猴子岩水电站下游河道疏浚地形图及断面测绘', 101, '1', '0', '0231', '刘家富', '13548009012', '地形图测绘', '0', 20, '112', 10, 101, NULL, '2020-12-30', NULL, '2021-01-05', '2021-01-26', '2021-01-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417006612482', '2020C65', '桐子林和二滩水电站工程枢纽区及右岸公路地质灾害区1:500倾斜摄影测绘', NULL, '0', '0', '0231', '杨德军', '13668123846', '三维模型及视频制作', '0', 20, '108,111', 13, NULL, NULL, '2020-12-29', NULL, '2020-12-29', '2021-01-08', '2021-01-20', '二滩电厂联系人宋小红 17302850890', NULL, NULL, NULL, NULL, NULL, NULL, '159,109', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417044361218', '2020C64', '川藏铁路折多塘安置点地形图测绘', 138, '0', '0', '0227', '陈林', '13730663670', '地形图测绘', '0', 20, '106', 10, 138, NULL, '2020-12-25', NULL, '2020-12-25', '2020-12-29', '2021-01-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417077915649', '2020W38', '眉山东部新城起步区1:500地形测绘服务采购项目', NULL, '0', '1', '0179', NULL, NULL, '地形图测绘', '0', 15, '110,111,107', 10, 83, NULL, '2020-12-24', NULL, '2020-12-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '65,61,77,76,73,193,122,152,137,4', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417115664385', '2020W39', '太平驿电站大坝左右岸高边坡安全监测', 101, '1', '1', '0164', NULL, NULL, '工程监测', '0', 15, '112', 10, 101, NULL, '2020-12-24', NULL, '2020-12-24', '2020-01-01', '2020-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417149218818', '2020C63', '汉源县万里工业园区整治工程地形图测绘（硝厂沟）', 138, '0', '0', '0227', '陈林', '13730663670', '地形图测绘', '0', 20, '106', 10, 138, NULL, '2020-12-23', NULL, '2020-12-25', '2020-12-26', '2020-12-29', NULL, 'uploadkmlFiles\\2023C13金川KZD.kml', 'uploadkmlFiles\\2023C13大渡河流域扩机规划金川水电站1：2000地形图（正式图）(范围线)-CGCS2000.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417186967554', '2020C62', '孟底沟水电站施工用地范围图转成2000国家大地坐标系', 47, '0', '0', '0231', '蔡翔', '18502852109', '坐标转换', '0', 20, '109', 10, 47, NULL, '2020-12-22', NULL, '2020-12-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417224716290', '2020C61', '牙根一级水电站水库淹没区及枢纽工程建设区界桩布置图编制询价表', 83, '0', '0', '0233', '袁有仓', '18682751096', '界桩布置图编制', '0', 20, '111', 13, 83, NULL, '2020-12-21', NULL, '2020-12-21', '2020-12-25', '2020-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417262465026', '2020C60', '乐山市马边县芦稿溪水库工程芦稿溪、兴隆沟、马边河河道1:1000大断面测量', 61, '0', '0', '0231', '刘家富', '13548009012', '断面', '0', 20, '111', 10, 35, NULL, '2020-12-18', NULL, '2020-12-21', '2020-12-24', '2020-12-29', '尽快安排工作，尽快提交资料', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417296019457', '2020C59', '四川省马边县芦稿溪水库可行性研究阶段兴隆水库枢纽区1:1000地形地类图补测', 33, '0', '0', '0231', '冯春', '13981823592', '地形图测绘', '0', 20, '110', 10, 33, NULL, '2020-12-07', NULL, '2020-12-07', '2020-12-08', '2020-12-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417333768193', '2020C58', '二滩水电站后续项目二滩、桐子林坐标转换', 102, '1', '0', '0231', '罗勇', '13808211293', '坐标转换', '0', 20, '112', 10, 102, NULL, '2020-12-03', NULL, '2020-12-08', '2020-11-24', '2020-11-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417367322626', '2020W36', '眉山市青神县莫中坝、慈母溪渡口、雷中坝渡口水下地形图测绘', 61, '0', '1', '0132', '刘坤', '18990354399', '地形图测绘', '0', 15, '111', 10, 145, NULL, '2020-11-30', NULL, '2020-12-01', '2020-12-08', '2020-12-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417400877057', '2020W37', '成都市青白江区拆迁和空闲地块监管技术外包服务', 39, '1', '1', '0029', '钟科', '13881853981', '正射影像图DOM', '0', 15, '108', 10, 39, NULL, '2020-11-30', NULL, '2020-12-01', '2021-03-15', '2021-04-20', NULL, NULL, NULL, NULL, NULL, '3', '135', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417438625793', '2020C57', '瀑布沟水电站库区新增影响区大堡1:2000地形图补测', NULL, '0', '0', '0227', '徐明山', '18580184267', '地形图测绘', '0', 20, '110,111', 10, NULL, NULL, '2020-11-20', NULL, '2020-11-20', '2020-11-22', '2020-11-28', '完成时间现场与用户协商', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417472180225', '2020C54', '米林水库电站规划加深（预可）阶段地形图测绘', 61, '0', '0', '0231', '李进元', '13808192425', '地形图测绘', '0', 20, '110,111', 10, 61, NULL, '2020-11-18', NULL, '2020-11-25', '2020-12-13', '2021-01-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417509928962', '2020C56', '紫霞水电站预可阶段地形图测绘', 61, '0', '0', '0231', '吴晨阳', '13981861163', '地形图测绘', '0', 20, '110,111,107', 10, 61, NULL, '2020-11-18', NULL, '2020-11-25', '2020-12-11', '2021-01-12', '完成时间尽快完成', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417539289089', '2020C55', '岗托水电站坝址区1:1000地形图测绘', NULL, '0', '0', '0231', '马宏', '13882264834', '地形图测绘', '0', 20, '110,111,107', 10, NULL, NULL, '2020-11-18', NULL, '2020-11-23', '2020-12-02', '2020-12-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417564454914', '2020C53', '天星坝水库枢纽工程1#和2#支洞口施工控制网测量', 83, '0', '0', '0227', '欧玉鹏', '13688028219', '施工测量控制网', '0', 20, '111', 10, 83, NULL, '2020-11-12', NULL, '2020-11-12', '2020-11-16', '2020-11-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417644146689', '2020W35', '两河口水电站枢纽区测量控制网2020年度复测', 122, '0', '1', '0105', NULL, NULL, '施工测量控制网', '0', 15, '201', 10, 122, NULL, '2020-11-12', NULL, '2020-11-12', '2020-11-12', NULL, NULL, 'uploadkmlFiles\\2022C68屏山抽水蓄能电站西村站址地形图控制点.kml', 'uploadkmlFiles\\猴子岩外部供水及料源测量范围及标注.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417707061250', '2020W34', '四川大渡河双江口水电站枢纽工程施工测量控制网复测（2020年）', 120, '1', '1', '0159', NULL, NULL, '施工测量控制网', '1', 15, '202', 10, 120, NULL, '2020-11-12', NULL, '2020-11-15', '2020-10-19', '2020-12-08', NULL, NULL, 'uploadkmlFiles\\宜宾蟠龙2000测图范围-105.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417723838466', '2020C52', '大渡河双江口水电站左岸泄洪雾化区1:1000地形图测绘', 33, '0', '0', '0231', '李永红', '18980568118', '地形图测绘', '0', 20, '110,202', 10, 120, NULL, '2020-11-10', NULL, '2020-11-12', '2020-11-15', '2020-12-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417736421378', '2020C51', '大渡河绰斯甲水电站3#渣场1:1000地形图测绘', NULL, '0', '0', '0231', '杨玉川', '18280125720', '地形图测绘', '0', 20, '110,111', 10, NULL, NULL, '2020-11-10', NULL, '2020-11-10', '2020-10-18', '2020-10-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417753198593', '2020C50', '双江口水电站征地红线图坐标转换CGCS2000', 61, '0', '0', '0227', '何生兵', '13881743394', '坐标转换', '0', 20, '111', 10, 61, NULL, '2020-10-28', NULL, '2020-11-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417769975809', '2020C49', '金沙江上游川藏段（西藏侧）河道管理范围划定服务', 144, '0', '0', '0232', '张波', '15881113068', '河湖划界', '0', 7, '110,111', 10, 144, NULL, '2020-10-27', NULL, '2020-10-30', '2020-11-04', '2020-11-22', '请非总尽快安排工作，1：1万地形图最终范围、断面位置及界桩（位置）数量与甲方沟通，按甲方要求执行。', 'uploadkmlFiles\\2023C25控制点.kml', 'uploadkmlFiles\\2023C25地形图范围.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417782558721', '2020C48', '两河口水电站瓦孜组对外连接道路1:1000地形图测绘', 122, '0', '0', '0227', '吴昊', '15123139869', '地形图测绘', '0', 20, '110,201', 10, 122, NULL, '2020-10-27', NULL, '2020-10-27', '2020-10-26', NULL, '地形要求准确', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417795141633', '2020C47', '武都引水工程取水枢纽闸修复设计地形图测绘', 61, '0', '0', '0231', '许韬', '13880409922', '地形图测绘', '0', 20, '110,111,107', 10, 61, NULL, '2020-10-26', NULL, '2020-10-26', '2020-10-26', '2020-10-27', NULL, 'uploadkmlFiles\\2023C27业主营地图根控制点点位.kml', 'uploadkmlFiles\\2023C27测绘范围.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417807724546', '2020C46', '重庆潼南双江航电枢纽工程1:500水下地形图测绘', NULL, '0', '0', '0231', '张顺高', '13808188003', '地形图测绘', '0', 20, '111', 10, NULL, NULL, '2020-10-20', NULL, '2020-10-20', '2020-10-18', '2020-10-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417820307458', '2020C45', '重庆潼南双江航电枢纽工程施工测量控制网建网及首次观测', 61, '0', '0', '0231', '张顺高', '13808188003', '施工测量控制网', '0', 20, '111', 10, 61, NULL, '2020-10-19', NULL, '2020-10-20', '2020-11-02', '2020-12-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417837084674', '2020C44', '德阳天府西湖工程地形图测绘', 61, '0', '0', '0231', '胡云明', '13880580537', '地形图测绘', '0', 20, '111', 10, 145, NULL, '2020-10-14', NULL, '2020-10-14', '2020-10-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417849667586', '2020W32', '大邑县农村乱占耕地建房问题摸排', 70, '0', '1', '0041', NULL, NULL, '不动产项目', '0', 15, '111,106', 10, 70, NULL, '2020-10-13', NULL, '2020-10-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417862250498', '2020C43', '重庆市开州区移民新城供水项目（鲤鱼塘水库）泄洪河道及引水渠道综合治理工程1:1000地形图测绘', NULL, '0', '0', '0231', '刘仲', '18030508901', '地形图测绘', '0', 20, '111', 10, NULL, NULL, '2020-10-13', NULL, '2020-10-13', '2020-10-15', '2020-10-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417874833410', '2020W33', '2020年西华段铁路沿线环境品质提升工程测绘项目', 138, '0', '1', '0024', '陈工', '13982254702', '地形图测绘', '0', 22, '106', 13, 138, NULL, '2020-10-13', NULL, '2020-10-20', '2020-10-13', '2020-10-18', NULL, 'uploadkmlFiles\\HT控制点.kml', 'uploadkmlFiles\\HTFW.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417887416322', '2020W31', '重庆第二机场预选场址地形图及净空障碍物测绘', 11, '0', '1', '0248', '吴亚东', '13541297276', '地形图测绘', '0', 22, '107', 10, 11, NULL, '2020-10-12', NULL, '2020-10-12', NULL, NULL, NULL, 'uploadkmlFiles\\2022c83KZD.kml', 'uploadkmlFiles\\2022c83道孚抽水蓄能水电站可研阶段测绘FWX.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417904193537', '2020W30', '两河口水电站库区测绘及库容复核', 122, '0', '1', '0200', NULL, NULL, '库容复核', '0', 22, '108,111,201', 10, 122, NULL, '2020-10-09', NULL, '2020-10-12', '2020-10-14', '2020-11-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417925165058', '2020C42', '孟底沟水电站对外交通辅助道路水毁修复工程1:500地形图测绘', 71, '1', '0', '0231', '李任华', '13980088186', '地形图测绘', '0', 20, '111', 13, 71, NULL, '2020-09-30', NULL, '2020-10-27', '2020-10-28', '2020-11-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417954525186', '2020W29', '黄河四川段综合治理可行性研究项目测绘工作项目						黄河四川段综合治理可行性研究项目测绘工作报价表', 138, '0', '1', '0090', '陈雄波', '13838385309', '地形图测绘', '0', 21, '106', 13, 138, NULL, '2020-09-25', NULL, '2020-09-28', '2020-09-27', '2021-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881417971302402', '2020W27', '绰斯甲水电站工程施工测量控制网复测', 101, '1', '1', '0083', '刘忠雨', '13568905630', '施工测量控制网', '0', 22, '112', 13, 101, NULL, '2020-09-22', NULL, '2020-09-25', '2020-10-08', '2020-11-15', '对绰斯甲水电站施工测量控制网项目进行损毁的网点恢复、未覆盖的工程区新建网点及对施工测量控制网复测等服', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418034216962', '2020W28', '溪洛渡水电站坝区土地勘界及测绘技术服务合同', 83, '0', '1', '0147', '李利华', '15287060629', '勘界及测绘', '0', 22, '111', 10, 83, NULL, '2020-09-22', NULL, '2020-09-23', '2020-10-09', '2020-12-25', '溪洛渡水电站坝区已确权永久用地约20公里边界的界址实地测量及标示（包含后期周界围墙施工配合测量），各标', NULL, NULL, NULL, NULL, NULL, '16', '31,169,46', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418126491649', '2020C40', '老挝色拉龙一级水电站1:5000库区淹没放大地形图测绘', 143, '0', '0', '0231', '欧文兵', '13980580419', '地形图测绘', '0', 20, '110', 13, 143, NULL, '2020-09-18', NULL, '2020-09-21', '2020-09-03', '2020-09-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418139074562', '2020C41', '加查水电站土地复垦地形图测绘', 71, '1', '0', '0227', '陈林', '13730663670', '地形图测绘', '0', 20, '111', 13, 71, NULL, '2020-09-18', NULL, '2020-09-28', '2020-09-25', '2020-10-18', '加查水电站枢纽区现状地形图（2019年11月），是否可以利用？一定要严格检验。完成时间尽快安排完成。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418155851778', '2020C38', '广州白云马沥物联网产业园水系改造项目地形图测绘', 83, '0', '0', '0231', '李思嘉', '18190690323', '地形图测绘', '0', 20, '111', 13, 83, NULL, '2020-09-10', NULL, '2020-09-14', '2020-09-16', '2020-09-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418172628994', '2020C39', '岷江流域820泥石流灾后抢险及修复设计地形图测绘', 83, '0', '0', '0231', '田雄', '15902805101', '地形图测绘', '0', 20, '111', 10, 83, NULL, '2020-09-10', NULL, '2020-09-10', '2020-09-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418185211906', '2020W26', '新疆哈密抽水蓄能电站三维扫描测量技术服务', 39, '1', '1', '0224', NULL, NULL, '激光扫描', '0', 15, '107', 10, NULL, NULL, '2020-09-10', NULL, '2020-09-10', '2020-09-12', '2020-09-30', NULL, NULL, NULL, NULL, NULL, '4', '136', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418197794818', '2020C37', '明台电站防护堤修复设计地形图测绘', 83, '0', '0', '0231', '施裕兵', '13808213204', '地形图测绘', '0', 20, '111', 10, 83, NULL, '2020-09-04', NULL, '2020-09-06', '2020-09-07', '2020-09-10', '现场电厂业主联系人，钟建军15908224466', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418214572034', '2020C36', '汉源县万里工业园区整治工程地形图测绘', 138, '0', '0', '0227', '陈林', '13730663670', '地形图测绘', '0', 20, '110,107,106', 10, 138, NULL, '2020-08-31', NULL, '2020-08-31', '2020-08-31', '2020-09-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418227154945', '2020W25', '昌都市河湖管理范围划定及岸线保护与利用规划编制项目', 61, '0', '1', '0193', NULL, NULL, '河湖划界', '0', 22, '110,111', 10, 61, NULL, '2020-08-14', NULL, '2020-08-17', '2020-08-24', '2020-10-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418239737858', '2020W24', '泸县“房地一体”宅基地使用权、集体建设用地使用权及房屋所有权不动产登记项目', 59, '0', '1', '0111', '税女士', '0830-8191923', '房地一体项目', '1', 22, '108,110,111,106', 10, 59, NULL, '2020-08-14', NULL, '2020-08-17', '2020-08-15', NULL, NULL, NULL, NULL, NULL, NULL, '2', '132', '31,18,98,109,137,120', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418256515073', '2020C33', '涪江双江航电枢纽工程水库区及工程建设区1:500地形图测绘', NULL, '0', '0', '0231', '张顺利', '13699068539', '地形图测绘', '0', 20, '110,111', 10, NULL, NULL, '2020-08-12', NULL, '2020-08-13', '2020-08-14', '2020-09-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418273292290', '2020W22', '自贡市沿滩新城区管理委员会卧龙湖东区基础测绘', 143, '0', '1', '0281', NULL, NULL, '地形图测绘', '0', 15, '110,111,107', 10, 61, NULL, '2020-07-31', NULL, '2020-08-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418290069506', '2020C35', '西藏自治区朋曲河湖划界测绘项目', 83, '0', '0', '0232', '刘家富', '13548009012', '河湖划定', '0', 20, '110,111', 10, 83, NULL, '2020-07-22', NULL, '2020-07-22', '2020-07-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418302652417', '2020C34', '广州市白云区市管河道防洪潮闸闭合段情况摸查坐标高程测量', 49, '1', '0', '0231', '雷运华', '18782936832', '其它测绘项目', '0', 20, NULL, 10, 49, NULL, '2020-07-22', NULL, '2020-07-22', '2020-07-22', '2020-07-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418315235330', '2020W21', '金沙江（雷波县段）河道砂石储量勘测', NULL, '0', '1', '0004', NULL, NULL, '地形图测绘', '0', 15, '108,111', 13, NULL, NULL, '2020-07-13', NULL, '2020-07-13', '2020-07-13', '2020-07-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418327818241', '2020C32', '双江口水电站康生寺外部供水工程、大石凼居民点补测等测绘任务', 144, '0', '0', '0227', '金勇', '13550046031', '地形图测绘', '0', 20, '110,111', 10, 144, NULL, '2020-07-06', NULL, '2020-07-06', '2020-06-30', '2020-07-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418340401153', '2020C31', '羊湖太阳能抽蓄储能项目地形地类修正测绘及断面测绘', NULL, '0', '0', '0237', '周小波', '18980568501', '地形图测绘', '0', 20, '111', 10, NULL, NULL, '2020-06-23', NULL, '2020-06-28', '2020-06-26', '2020-07-10', '成果提交时限：自委托日起7日内', 'uploadkmlFiles\\2023C38-川藏（雅安）工业园区控制点.kml', 'uploadkmlFiles\\2023C38-川藏（雅安）工业园区范围线.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418369761282', '2020W20', '成都兴城投资集团有限公司2020年度建设项目工程测绘服务', 138, '0', '1', '0032', NULL, NULL, '地形图测绘', '0', 15, '111,106', 13, 138, NULL, '2020-06-22', NULL, '2020-06-23', '2019-06-23', '2020-07-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418386538498', '2020C30', '巴基斯坦Tangir水电站地形图数字化', 33, '0', '0', '0231', '唐忠敏', '13708003900/87399409', '地形图数字化', '0', 20, '110', 10, 33, NULL, '2020-06-17', NULL, '2020-06-17', '2020-06-17', '2020-06-26', '尽快统计工作量，做预算使用。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418399121410', '2020C22', '广州番禺水环境治理项目测绘工程（一期、二期）', 61, '0', '0', '0236', '郑晓君', '13540851610', '地形图测绘', '0', 22, '111', 10, 61, NULL, '2020-06-17', NULL, '2020-06-19', '2019-12-23', '2020-06-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418411704322', '2020C29', '西昌东河水库枢纽区1:500地形图测绘', 83, '0', '0', '0231', '吴东利(87399879)', '13880559637', '地形图测绘', '0', 20, '110,111', 10, 83, NULL, '2020-06-11', NULL, '2020-06-16', '2020-06-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418424287233', '2020C28', '大渡河猴子岩水电站尼洛河坝、菩提河坝移民安置点1:500地形图测绘', 101, '1', '0', '0227', '王铁虎', '13980726634', '地形图测绘', '0', 20, '110,112', 10, 101, NULL, '2020-06-10', NULL, '2020-06-10', '2020-06-12', '2020-06-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418441064449', '2020C27', '大渡河双江口水电站阿斯布土料场1:1000断面测量', 144, '0', '0', '0231', '袁国庆', '13541072590', '断面', '0', 20, '108,111', 10, 144, NULL, '2020-06-08', NULL, '2020-06-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418453647362', '2020C26', '大渡河汉源县青富段防洪工程', NULL, '0', '0', '0227', '王铁虎', '13980726634', '地形图测绘', '0', 20, '110,111', 10, NULL, NULL, '2020-06-08', NULL, '2020-06-08', '2020-06-10', '2020-06-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418466230273', '2020C25', '大渡河硬梁包水电站三维地形曲面制作', 39, '1', '0', '0231', '黄克戬', '13408699903/87392647', '三维地形面', '0', 20, '108', 10, 39, NULL, '2020-06-01', NULL, '2020-06-04', '2020-06-03', '2020-06-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418483007490', '2020W19', '老挝南欧江七级水电站库区地形测量数据采集项目', NULL, '0', '1', '0241', NULL, NULL, '激光扫描', '0', 20, '110,107', 13, NULL, NULL, '2020-05-29', NULL, '2020-06-01', '2020-06-16', '2020-08-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418495590402', '2020C24', '西昌东河水库枢纽区1:1000三维地形面制作', 39, '1', '0', '0231', '吴东利(87399879)', '13880559637', '三维地形面', '0', 20, '108', 13, NULL, NULL, '2020-05-22', NULL, '2020-05-22', '2020-05-15', '2020-05-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418508173314', '2020C23', '溪洛渡水电站枢纽区、库区、移民安置点地形地类图坐标转换', 51, '0', '0', '0227', '闫文益', '18121861225', '坐标转换', '0', 20, '110', 10, 51, NULL, '2020-05-22', NULL, '2020-05-22', '2020-05-25', '2020-05-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418524950530', '2020C21', '老木孔水电站航拍及三维演示测绘', 39, '1', '0', '0231', '张顺高', '13808188003', '三维模型及视频制作', '0', 20, '108,107', 13, NULL, NULL, '2020-05-20', NULL, '2020-05-20', '2020-06-19', '2020-07-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418541727745', '2020C20', '大渡河长河坝水电站汤坝新址1:500地形地类图测绘', 101, '1', '0', '0227', '张波', '13708019335', '地形图测绘', '0', 20, '110,112,107', 13, 101, NULL, '2020-05-18', NULL, '2020-05-18', '2020-05-19', '2020-05-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418558504961', '2020W18', '南涧至云县高速公路控制地形测绘', NULL, '0', '1', '0220', '柯文聪', '15558008707', '公路测量', '0', 15, '110,111', 13, NULL, NULL, '2020-05-15', NULL, '2020-05-15', '2020-05-19', '2020-07-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418575282177', '2020C19', '重庆市开州区移民新城供水项目（鲤鱼塘水库）泄洪河道及引水渠道综合治理工程1:1000地形图测绘', 61, '0', '0', '0231', '张顺高', '13808188003', '地形图测绘', '0', 20, '111', 10, 61, NULL, '2020-05-12', NULL, '2020-05-12', '2020-05-13', '2020-05-16', NULL, 'uploadkmlFiles\\2023C10点.kml', 'uploadkmlFiles\\2023C10德登-范围线-CGCS2000-高斯投影3度带-中央经线99°.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418592059394', '2020C18', '大渡河绰斯甲河绰斯甲水电站1:1000地形图（含水下及断面）测绘', 144, '0', '0', '0231', '刘放', '13980409051', '地形图测绘', '0', 20, '110,111', 13, 144, NULL, '2020-05-07', NULL, '2020-05-07', '2020-05-11', '2020-05-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418608836610', '2020C17', '西藏昌都邦达机场公路测量（1期）', NULL, '1', '0', '0231', '李任华', '13980088186', '公路测量', '0', 20, '111', 13, NULL, NULL, '2020-05-06', NULL, '2020-05-06', '2020-05-07', '2020-05-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418625613825', '2020W17', '智慧旅游基础数据采集项目补测地形图', 33, '1', '1', '0113', NULL, NULL, '地形图测绘', '0', 15, '110', 13, NULL, NULL, '2020-04-24', NULL, '2020-04-30', '2020-05-06', '2020-05-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418642391041', '2020W16', '石棉县孟获城景区规划用地测绘', NULL, '0', '1', '0155', '王军', '13795840666', '地形图测绘', '0', 22, '107', 10, NULL, NULL, '2020-04-22', NULL, '2020-04-22', '2020-05-07', '2020-05-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418663362562', '2020W15', '贵州省六枝至安龙高速公路北盘江大桥、贵州省贵阳经金沙至古蔺高速公路乌江大桥等处二等跨河水准测量', 61, '0', '1', '0076', '何正海', '13595100604', '公路测量', '0', 15, '111', 10, 61, NULL, '2020-04-22', NULL, '2020-04-22', '2020-04-23', '2020-04-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418680139778', '2020W10', '双江口水电站S220永久临时占地坐标转换工作', 144, '0', '1', '0159', '付海东', '13388222713', '坐标转换', '0', 20, '111', 10, 144, NULL, '2020-04-17', NULL, '2020-04-20', '2020-04-21', '2020-04-21', '帮忙项目', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418696916993', '2020C16', '重庆潼南双江航电工程库区专项工程道路、防护工程测绘', 61, '0', '0', '0227', '莫坤华', '13608086723', '地形图测绘', '0', 20, '111,116', 13, 61, NULL, '2020-03-26', NULL, '2020-03-26', '2020-04-27', '2020-05-01', '加强与用户的沟通和协调。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418713694209', '2020C15', '瀑布沟水电站竹马河1:1000地形图测绘', 61, '0', '0', '0227', '曹凯', '18981631215', '地形图测绘', '0', 20, '111', 13, 35, NULL, '2020-03-17', NULL, '2020-03-17', '2020-03-13', '2020-03-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418730471425', '2020W08', '四川岷江汉阳电站大坝外部变形监测（2020.3～2021.2定期观测和基准网基准值复测）', 61, '0', '1', '0131', '何天龙', '18781502131', '工程监测', '0', 15, '111', 13, 139, NULL, '2020-03-13', NULL, '2020-03-13', '2020-03-01', '2021-02-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418747248642', '2020C14', '龚嘴水电站厂区生活污水改造建设方案坐标高程测绘', 61, '0', '0', '0231', '向涛', '18581885020/87399920', '地形图测绘', '0', 20, '111', 13, 146, NULL, '2020-03-11', NULL, '2020-03-11', '2020-03-14', '2020-03-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418764025857', '2020C13', '大渡河老鹰岩一级、二级水电站地形图测绘', 83, '0', '0', '0231', '刘永波', '13438137962', '地形图测绘', '0', 20, '110,111', 13, 95, NULL, '2020-03-06', NULL, '2020-03-06', '2020-03-10', '2020-04-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418776608769', '2020C11', '金沙江溪洛渡水电站河口变形边坡1:2000地形图测绘', 83, '0', '0', '0227', '梁宇', '13908170231', '地形图测绘', '0', 20, '110,111', 13, 144, NULL, '2020-03-06', NULL, '2020-03-06', '2020-03-10', '2020-03-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418793385986', '2020C12', '大岗山水电站得妥集镇实物指标调查配合测量', 61, '0', '0', '0227', '曹凯', '18981631215', '实物指标配合测量', '0', 20, '111', 13, 35, NULL, '2020-03-06', NULL, '2020-03-06', '2020-03-08', '2020-03-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418810163201', '2020W07', '猴子岩变形监测（2020年）', 101, '1', '1', '0080', '唐珂', '18190776696', '工程监测', '0', 15, '112', 13, 101, NULL, '2020-03-02', NULL, '2020-03-03', '2020-01-01', '2020-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418822746114', '2020C10', '大岗山水电站库区滑坡1:2000地形图测绘', 35, '0', '0', '0227', '罗鹏', '13408698670', '地形图测绘', '0', 20, '110,111', 13, 35, NULL, '2020-02-28', NULL, '2020-02-28', '2020-03-08', '2020-03-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418835329026', '2020C09', '大渡河硬梁包水电站茧业公司复建新址地形图测绘', 35, '0', '0', '0227', '谢钢', '15882783788', '地形图测绘', '0', 20, '110,111', 13, 35, NULL, '2020-02-27', NULL, '2020-02-28', '2020-03-02', '2020-03-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418852106241', '2020C08', '双江口水电站库周交通公路初步设计测量配合及施工图中桩测量工作', 144, '0', '0', '0229', '吴永安', '13350891080', '公路测量', '0', 20, '111', 13, 144, NULL, '2020-02-27', NULL, '2020-02-28', '2020-03-17', NULL, '《双江口水电站库周交通公路初步设计测量配合及施工图中桩测量工作服务合同》已于2019年9月5日签订，由于甲', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418864689154', '2020C07', '四川省乐山市马边县芦稿溪水库工程建设征地界桩测设', NULL, '0', '0', '0231', '辛俊生', '13880952799', '界桩测设', '0', 20, '111', 13, 61, NULL, '2020-02-26', NULL, '2020-02-28', '2020-03-30', '2020-05-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418881466369', '2020W06', '邻水县小西河、柑子铺河、观音河、甘坝河、桥坝河、大湾河、九龙河、大石河等8条县级河流河道管理保护范围', 21, '0', '1', '0107', '徐江', '13882659130', '河湖划定', '1', 15, '110,111', 13, 21, NULL, '2020-02-24', NULL, '2020-03-04', '2020-03-04', '2020-05-22', NULL, NULL, NULL, NULL, NULL, '3', '135', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418894049281', '2020C05', '西巴霞曲综合规划项目测绘', 83, '0', '0', '0231', '石太军、罗勇', '13980519026、13808211293', '地形图测绘', '0', 20, '110,111', 13, 83, NULL, '2020-02-19', NULL, '2020-02-23', '2020-03-18', NULL, '控制测量，根据需要适当布设。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418910826498', '2020C04', '西巴霞曲水电规划项目测绘', 83, '0', '0', '0231', '石太军、罗勇', '13980519026、13808211293', '地形图测绘', '0', 20, '110,111', 13, 83, NULL, '2020-02-19', NULL, '2020-02-23', '2020-03-18', NULL, '控制测量，根据现场情况适当布置', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418923409409', '2020C06', '西巴霞曲河湖划界项目测绘', 83, '0', '0', '0231', '石太军、罗勇', '13980519026、13808211293', '地形图测绘', '0', 20, '110,111', 13, 83, NULL, '2020-02-19', NULL, '2020-02-23', '2020-03-18', NULL, '控制测量，根据需要适当布设。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418940186626', '2020C67', '两河口移民代建工程施工测量测绘服务（2020年）', 112, '1', '0', '0226', NULL, NULL, '工程测量中心', '0', 22, '106', 10, 112, NULL, '2020-01-07', NULL, '2020-01-08', '2020-01-01', '2021-08-31', '两河口移民代建工程施工测量技术服务合同', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418952769538', '2020W005', '四川省雅砻江两河口水电站工程测量中心服务（2020年）', 122, '0', '1', '0048', NULL, NULL, '工程测量中心', '1', 15, '201', 13, 122, NULL, '2020-01-03', NULL, '2020-01-03', '2020-01-01', '2020-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418965352449', '2020W004', '四川大渡河双江口水电站枢纽工程测量技术服务（2020年）', 120, '1', '1', '0159', NULL, NULL, '工程测量中心', '1', 15, '202', 13, 120, NULL, '2020-01-03', NULL, '2020-01-03', '2017-05-01', '2025-04-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418977935362', '2020W003', '大渡河金川水电站工程测量中心劳务配合（2020年）', 121, '0', '1', '0242', '杨木子', '15274878801', '工程测量中心', '1', 15, '203', 13, 120, NULL, '2020-01-02', NULL, '2020-01-03', '2019-08-06', '2026-06-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881418994712578', '2020W001', '雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测（2020年）', 102, '1', '1', '0200', NULL, NULL, '工程监测', '1', 15, '112', 13, 102, NULL, '2020-01-02', NULL, '2020-01-03', '2019-01-01', '2020-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419011489794', '2020W002', '雅砻江桐子林水电站大坝外部变形和近坝区滑坡体观测（2020年）', 102, '1', '1', '0202', '高翠峰', '0812-3331998', '工程监测', '0', 15, '112', 13, 102, NULL, '2020-01-02', NULL, '2020-01-03', '2020-01-01', '2020-12-31', NULL, 'uploadkmlFiles\\2023C04南江控制点成果.kml', 'uploadkmlFiles\\2023C04南江抽蓄tu.kml', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419028267010', '2019W34', '岷江汤坝航电输电线路测绘', NULL, '0', '1', '0172', '李志勇', '13678136653', '地形图测绘', '0', 20, '110,111', 13, NULL, NULL, '2019-12-30', NULL, '2019-12-31', '2020-01-03', '2020-01-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419045044225', '2019W33', '美姑县扶贫项目土地整理区域1：2000高清正摄影像（DOM）制作', 59, '1', '1', '0181', '韦凤', '17882297152', '地形图测绘', '0', 15, '111', 13, 59, NULL, '2019-12-27', NULL, '2019-12-27', '2019-12-29', '2020-01-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '111,102', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419057627138', '2020C001', '索朗嘎咕水利枢纽工程下游河道大断面测量', 46, '0', '0', '0234', '彭金涛', '13981979946', '其它测绘项目', '0', 20, '111', 13, 46, NULL, '2019-12-25', NULL, '2019-12-25', '2019-12-26', '2020-01-11', '控制测量工作根据现场实际工作适当去做。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419070210050', '2020C003', '汉源县城二号通道改造工程地形图测绘', 83, '0', '0', '0227', '梁炎', '17713530106', '地形图测绘', '0', 20, '110,111', 13, 83, NULL, '2019-12-23', NULL, '2019-12-23', '2019-12-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419086987266', '2020C002', '汉源湖景观坝工程（一期）1:500地形图测绘', 83, '0', '0', '0227', '梁炎', '17713530106', '地形图测绘', '0', 20, '110,111', 13, 83, NULL, '2019-12-23', NULL, '2019-12-23', '2019-12-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419099570177', '2019W32', '长河坝水电站1:500河道地形图地形测绘', 61, '0', '1', '0184', '孙洪亮', '13880637197', '地形图测绘', '0', 15, '111', 10, NULL, NULL, '2019-12-16', NULL, '2019-12-16', '2019-12-17', '2019-12-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419112153089', '2019W31', '永善支线进场道路地形图补图', 61, '1', '1', '0219', '施方', '15990110806', '地形图测绘', '0', 20, '110,111', 13, 35, NULL, '2019-12-05', NULL, '2019-12-05', '2019-12-12', '2019-12-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419128930305', '2019C65', '西藏大古水电规划项目测绘', 59, '1', '0', '0232', '李梓嘉', '028-87392939、18382178833', '地形图测绘', '0', 20, '111', 10, 59, NULL, '2019-12-03', NULL, '2019-12-04', '2019-11-30', '2019-12-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419145707521', '2019W30', '丰都县高家镇情旅峡风景区1：500地形图测绘和实景三维模型制作', 61, '0', '1', '0270', '谭总', '13896565206', '地形图测绘', '0', 15, '108,111', 13, 61, NULL, '2019-12-03', NULL, '2019-12-03', '2019-12-05', '2020-03-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419162484738', '2019C63', '金沙江上游波罗水电站白格堰塞湖水下地形图测绘', 83, '0', '0', '0231', '陈长江', '13880616099', '地形图测绘', '0', 20, '110,111', 13, 83, NULL, '2019-11-29', NULL, '2019-11-29', '2019-12-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419179261954', '2019C64', '大渡河绰斯甲水电站地形图及断面测量', 61, '0', '0', '0231', '向贤友', '87499260、15928516168', '地形图测绘', '0', 20, '110,111', 13, 61, NULL, '2019-11-29', NULL, '2019-11-29', '2019-12-04', '2019-12-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419191844866', '2019W29', '四川省雅安市名山区前进乡沿河村1:500地形图测绘', NULL, '0', '1', '0173', '鄢书记【雅安市名山区前进乡】', '13881648252', '地形图测绘', '0', 20, '110,111', 13, NULL, NULL, '2019-11-29', NULL, '2019-11-29', '2019-11-30', '2019-12-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419208622081', '2019C60', '天府西河1:1000地形图测绘', 145, '1', '0', '0236', '刘源、余志平', '13981830959、13648051708', '地形图测绘', '0', 20, '110,111', 13, 145, NULL, '2019-11-21', NULL, '2019-11-26', '2019-11-27', '2019-12-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419221204993', '2019C62', '映秀湾电站行洪论证和防洪能力复核断面测量', 61, '0', '0', '0232', '黄良文', '028-87399292、13709011632', '地形图测绘', '0', 20, '111', 58, 144, NULL, '2019-11-19', NULL, '2019-11-20', '2019-11-25', '2019-11-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419237982210', '2019W27', '二滩水电站大坝外部变形监测、桐子林水电站外部变形和近坝区滑坡体观测', 102, '1', '1', '0200，0202', '高翠峰', '0812-3331998', '工程监测', '0', 22, '112', 10, 102, NULL, '2019-11-14', NULL, '2019-11-15', '2019-01-01', '2019-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419254759426', '2019W28', '雅砻江桐子林水电站水库泥沙断面测量（2020年）', NULL, '1', '1', '0202', '高翠峰', '0812-3331998', '其它测绘项目', '0', 22, '111', 10, NULL, NULL, '2019-11-14', NULL, '2019-11-15', '2019-12-23', '2020-01-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419271536642', '2019C61', '猴子岩水电站孔玉乡泥洛河坝1：500地形图和格宗乡江口沟1：1000地形图', 83, '1', '0', '0227', '李鑫', '18015795659', '地形图测绘', '0', 22, '110,111', 10, 83, NULL, '2019-11-14', NULL, '2019-11-15', '2019-11-18', '2019-11-23', '城乡公司李鑫电话暂无', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419284119553', '2019W26', '猴子岩水电站外部变形监测(2019年）', 101, '1', '1', '0080', '唐珂', '18190776696', '工程监测', '1', 22, '112', 10, 101, NULL, '2019-11-14', NULL, '2019-11-15', '2019-01-01', '2019-12-31', '唐珂（工程处副处长）分管变形监测', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419296702466', '2019C19', '大渡河猴子岩水电站生态调度研究项目水下地形图及断面测绘', NULL, '0', '0', '0234', '刘盛赟', '13679085311', '地形图测绘', '0', 22, '110,111', 10, NULL, NULL, '2019-11-08', NULL, '2019-05-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419313479682', '2019C58', '铜街子水电站厂区生活污水接入地方管网建设方案坐标高程测绘', 61, '0', '0', '0231', '张顺高', '028-87399041、13808188003', '其它测绘项目', '0', 20, '111', 10, 146, NULL, '2019-11-04', NULL, '2019-11-05', '2019-11-07', '2019-11-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419330256897', '2019C59', '龙潭水电站坝顶1:500平面图测量', 61, '1', '0', '0231', '王剑', '028-87399930、13808006964', '地形图测绘', '0', 20, '111', 10, 145, NULL, '2019-11-04', NULL, '2019-11-05', '2019-11-04', '2019-11-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419347034113', '2019W01', '重庆市1:20003D产品及实景三维模型项目', 11, '0', '1', NULL, NULL, NULL, NULL, '0', NULL, '111,110', NULL, 61, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419363811330', '2019W03', '重庆市金科亿达两江健康科技城E3-2边坡朔石测量工程', 39, '1', '1', NULL, NULL, NULL, NULL, '0', NULL, '108,111', NULL, 39, NULL, '2019-10-29', NULL, NULL, '2019-01-04', '2019-01-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419376394242', '2019W06', '成都市郫都区国土资源局郫都区第三次全国土地调查项目（包二）', 83, '0', '1', NULL, NULL, NULL, NULL, '0', NULL, '111', NULL, 83, NULL, '2019-10-29', NULL, NULL, '2019-03-01', '2021-09-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419388977153', '2019W08', '新津县第三次全国国土调查监理服务', 49, '0', '1', NULL, '晏女士', '18113113725', NULL, '0', NULL, '111', NULL, 95, NULL, '2019-10-29', NULL, NULL, '2019-10-30', '2021-04-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419405754369', '2019W09', '自贡市沿滩区第三次全国国土调查服务项目', 59, '1', '1', NULL, '缪继超', '13684310941', NULL, '0', NULL, '111', NULL, 59, NULL, '2019-10-29', NULL, NULL, '2019-02-20', '2021-12-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419422531586', '2019W04', '华蓥市渠江画廊田园综合体项目地形测绘', 83, '0', '1', NULL, NULL, NULL, NULL, '0', NULL, '111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419439308802', '2019C08', '老木孔航电枢纽工程初步设计施工总布置图坐标系转换', 83, '0', '0', '0231', '罗勇', '13808211293', NULL, '0', NULL, '111', NULL, 83, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419451891714', '2019W10', '四川省田湾河流域梯级水电站仁宗海水库库容曲线复测项目', 46, '0', '1', NULL, NULL, NULL, NULL, '0', NULL, '110,111', NULL, 46, NULL, '2019-10-29', NULL, NULL, '2019-03-20', '2019-03-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419468668930', '2019W11', '阆中-仪陇-营山-达州高速公路阆中至营山段控制网复测', 102, '1', '1', NULL, NULL, NULL, NULL, '0', NULL, '112', NULL, 102, NULL, '2019-10-29', NULL, NULL, '2019-05-16', '2019-05-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419481251841', '2019W12', '雅砻江两河口水电站两河口石料场至三汇桥地形图测绘、库容复核地形图补测', 55, '1', '1', NULL, NULL, NULL, NULL, '0', NULL, '111', NULL, 55, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419498029057', '2019W13', '成都市金牛区沙湾片区综合整治项目房屋立面图测绘', 39, '1', '1', NULL, NULL, NULL, NULL, '0', NULL, '108', NULL, 39, NULL, '2019-10-29', NULL, NULL, '2019-04-18', '2019-06-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419514806274', '2019W14', '成都市东轴线项目地形图补测', 33, '1', '1', NULL, '罗晶', '15982493591', NULL, '0', NULL, '110', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419531583489', '2019W15', '大渡河双江口水电站枢纽工程施工测量控制网2019年度复测', 120, '1', '1', NULL, '董平', '13700936788', NULL, '0', NULL, '202', NULL, 120, NULL, '2019-10-29', NULL, NULL, '2019-03-01', '2019-04-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419548360705', '2019W16', '四川省河湖管理范围划定项目地形图、断面测绘', NULL, '1', '1', NULL, NULL, NULL, NULL, '0', NULL, '111,110,112', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419565137921', '2019W17', '向家坝灌区渠道地形图测绘', 51, '1', '1', NULL, NULL, NULL, NULL, '0', NULL, '110', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419581915137', '2019W18', '雅砻江两河口水电站大坝、料场等工作面填筑量或开挖量测量', 122, '0', '1', NULL, NULL, NULL, NULL, '0', NULL, '201,108', NULL, NULL, NULL, '2019-10-29', NULL, NULL, '2019-06-30', '2019-07-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419594498049', '2019W19', '国网羊湖发电公司第七期压力钢管永久变形监测网校核项目', 102, '1', '1', NULL, '唐建康', '15889045051', NULL, '0', NULL, '112', NULL, 102, NULL, '2019-10-29', NULL, NULL, '2019-07-16', '2019-08-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419607080962', '2019W20', '南江县农房登记权籍调查及测绘', 9, '1', '1', NULL, NULL, NULL, NULL, '0', NULL, '106,111', NULL, 113, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2', '131', '103,60', NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419619663874', '2019W21', '德阳市罗江区自然资源局全域1:500数字化地形（地籍）测量和全域宅基地房地合一颁证项目（第二包）', 11, '1', '1', NULL, NULL, NULL, NULL, '0', NULL, '108,111,110', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '14', '132', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419632246785', '2019W22', '仁寿县清水镇东风渠地形图测绘', 61, '1', '1', NULL, NULL, NULL, NULL, '0', NULL, '111', NULL, 71, NULL, '2019-10-29', NULL, NULL, '2019-10-09', '2019-10-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419649024001', '2019W23', '四川自贡市富荣产城融合带基础设施建设项目（C、D段）测绘', 61, '1', '1', '0240', '柯经理', '13858093421', NULL, '0', NULL, '111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, '2019-09-21', '2019-09-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419665801218', '2019C57', '孟底沟水电站深化设计地形图测绘', 61, '0', '0', '0231', '薛云飞、祝华平', '13880571880、13808097237', '地形图测绘', '0', 22, '108,110,111', 10, 61, NULL, '2019-10-29', NULL, '2019-10-30', '2019-11-05', '2019-12-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419682578433', '2019C14', '雅砻江中下游杨房沟水电站、卡拉水电站、二滩水电站地形图测绘', 51, '0', '0', '0231', '地质处刘思丁', '13880826590', NULL, '0', NULL, '110,111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419703549953', '2019C32', '天星坝水库枢纽工程水库区、建设区地形图坐标转换', 47, '0', '0', NULL, '王莉', '13880207686', NULL, '0', NULL, '106', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419741298689', '2019C35', '普格县甘天地二期风电场地形图测绘', 83, '0', '0', NULL, '温鹏', '87499921、13980526192', NULL, '0', NULL, '108,111', NULL, 83, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419774853121', '2019C37', '江西抚州水环境项目坐标系转换', 51, '0', '0', NULL, '蔡庆', '18180651210', NULL, '0', NULL, '110,111', NULL, 145, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419812601858', '2019C40', '四川省广元凉水泉风电场控制点坐标系转换', 51, '0', '0', NULL, '刘顺华', '13882022052/87499435', NULL, '0', NULL, '110', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419846156290', '2019C42', '白水江多诺水电站放空洞出口下游河道1:1000地形图测绘', 61, '0', '0', NULL, '曾勇', '13678129768', NULL, '0', NULL, '111', NULL, 61, NULL, '2019-10-29', NULL, NULL, '2019-08-11', '2019-08-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419883905026', '2019C45', '雅砻江孟底沟水电站金波石料场码头用地范围图坐标转换', 47, '0', '0', NULL, NULL, NULL, NULL, '0', NULL, '106', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419917459457', '2019C48', '西藏自治区霞曲流域水电规划', 83, '0', '0', '0237', '李建兵', '13980752604', NULL, '0', NULL, '111', NULL, 83, NULL, '2019-10-29', NULL, NULL, '2019-09-10', '2019-10-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419955208193', '2019C15', '四川省白水江多诺水电站施工测量控制网2019年复测', NULL, '0', '0', '0230', '唐朝阳', '13708026642', NULL, '0', NULL, '111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881419988762625', '2019C18', '大渡河双江口水电站库周交通公路配合放线测量', 120, '1', '0', NULL, '成都院基础设施分公司吴永安', '13350891080', NULL, '0', NULL, '202', NULL, 120, NULL, '2019-10-29', NULL, NULL, '2019-05-05', '2019-05-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420043288578', '2019C30', '大渡河双江口太阳河公路1:2000地形图补测', 51, '0', '0', NULL, '吴永安', '13350891080', NULL, '0', NULL, '110', NULL, NULL, NULL, '2019-10-29', NULL, NULL, '2019-07-22', '2019-07-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420081037314', '2019C21', '汶川川能投资有限公司建材综合利用项目地形图测绘', 102, '1', '0', NULL, '曹华', '13980019909', NULL, '0', NULL, '112', NULL, 102, NULL, '2019-10-29', NULL, NULL, '2019-04-26', '2019-04-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420118786049', '2019C24', '大渡河双江口水电站足木足孔龙地形图坐标转换', 47, '0', '0', NULL, '欧玉鹏', '13688028219', NULL, '0', NULL, '106', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420152340482', '2019C27', '小金县小金川春厂坝抽水蓄能电站厂址水下地形及断面测绘', 102, '1', '0', NULL, '汤雪峰', '13880538710', NULL, '0', NULL, '112', NULL, 102, NULL, '2019-10-29', NULL, NULL, '2019-05-16', '2019-05-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420173312002', '2019C29', '大渡河双江口水电站当卡料场测1:1000横断面测绘', 120, '0', '0', NULL, '黎昌有', '13981813952', NULL, '0', NULL, '202', NULL, 120, NULL, '2019-10-29', NULL, NULL, '2019-08-15', '2019-09-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420194283521', '2019W02', '雅砻江桐子林水电站水库泥沙断面测量（2019年）', NULL, '1', '1', NULL, NULL, NULL, NULL, '0', NULL, '111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420211060738', '2019W05', '自贡市自流井区河流管理与保护范围划定', 50, '1', '1', NULL, NULL, NULL, NULL, '0', NULL, '110,111,109', NULL, NULL, NULL, '2019-10-29', NULL, NULL, '2019-11-11', '2021-02-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420227837954', '2019W07', '泸县国土资源局第三次全国国土调查项目', 59, '1', '1', NULL, NULL, NULL, NULL, '0', NULL, '111', NULL, 59, NULL, '2019-10-29', NULL, NULL, '2019-01-23', '2022-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420240420865', '2019C25', '金沙江溪洛渡水电站库区雷波县作坊洗岸坡等配合测量', 61, '1', '0', NULL, '吴耀宇', '15928147187', NULL, '0', NULL, '111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, '2019-09-16', '2019-10-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420257198082', '2019C05', '大渡河猴子岩水电站泥洛河坝引水项目地形图测绘', 83, '0', '0', '0227', '王铁虎', '13980726634', NULL, '0', NULL, '111,110', NULL, 83, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420269780994', '2019C34', '老挝南碧水电站1:1000地形图补测', 33, '1', '0', NULL, '罗勇', '13808211293', NULL, '0', NULL, '110', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420290752514', '2019C01', '天府新区白沙水库1:500地形图复测', 46, '1', '0', '0236', NULL, NULL, NULL, '0', NULL, '111', NULL, 46, NULL, '2019-10-29', NULL, NULL, '2019-01-04', '2019-01-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420315918338', '2019C02', '雅砻江桐子林水电站配合测量', NULL, '0', '0', '0227', '吴晓', '18583363583', NULL, '0', NULL, '111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420336889857', '2019C03', '雅砻江二滩水电站后续项目三滩大沟1:500地形图测绘', NULL, '0', '0', '0231', '秦光辉', '87399794', NULL, '0', NULL, '111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420374638594', '2019C04', '喀麦隆巴岗德水电站测绘', 61, '1', '0', '0231', '成勘院罗勇', '87398049/13808211293', NULL, '0', NULL, '111', NULL, 61, NULL, '2019-10-29', NULL, NULL, '2019-01-07', '2019-02-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420412387330', '2019C06', '成都市府河公园及宜居水岸工程地形图补测', NULL, '0', '0', '0236', '曾子', '18582458712', NULL, '0', NULL, '111,110', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420445941761', '2019C07', '大渡河双江口水电站脚木足集镇征地红线与孔龙垫高防护区地形图测绘', 120, '0', '0', '0227', '何生兵', '13881743394', NULL, '0', NULL, '202,110', NULL, 120, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420479496193', '2019C09', '江西抚州水环境测绘项目资料整理', 50, '1', '0', '0236', '郑晓晶', '13540851610', NULL, '0', NULL, '109', NULL, 50, NULL, '2019-10-29', NULL, NULL, '2019-02-06', '2019-02-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420513050625', '2019C10', '雅砻江孟底沟、楞古、两河口水电站坐标系统转换', 47, '0', '0', '0231', '薛云飞、陈秋华、金伟、汤雪峰、熊岗', '87399161、87399591、87499052、87399860、87398027', NULL, '0', NULL, '111', NULL, 122, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420550799361', '2019C11', '雅砻江两河口水电站新增库周交通公路测量', 122, '0', '0', '0229', NULL, NULL, NULL, '0', NULL, '201', NULL, 122, NULL, '2019-10-29', NULL, NULL, '2019-02-25', '2019-03-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420584353793', '2019C12', '天府新区白沙水库1:500地形图第二次复测', 46, '0', '0', '0236', NULL, NULL, NULL, '0', NULL, '111', NULL, 46, NULL, '2019-10-29', NULL, NULL, '2019-03-12', '2019-03-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420617908225', '2019C13', '大渡河硬梁包水电站实物指标调查配合测量', 61, '1', '0', '0227', '谢钢', '15882783788', NULL, '0', NULL, '111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, '2019-03-12', '2019-10-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420651462658', '2019C16', '大渡河长河坝水电站章古山土地开发整理地形地类图测绘', 51, '0', '0', '0227', '成都院城发展工程分公司李强', '18215505713', NULL, '0', NULL, '110', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420685017090', '2019C17', '金沙江溪洛渡水电站天星坝水库干渠地形图补测', 139, '0', '0', NULL, '欧玉鹏', '13688028219', NULL, '0', NULL, '111,110', NULL, 139, NULL, '2019-10-29', NULL, NULL, '2019-04-09', '2019-04-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420718571521', '2019C20', '遂宁市城镇污水处理PPP项目测绘技术服务', 139, '0', '0', NULL, '李扬', '13980005622', NULL, '0', NULL, '111,110', NULL, 139, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420756320257', '2019C22', '成都市武侯区鸡公堰平面整理地形图测绘', NULL, '0', '0', NULL, '郑晓晶', '13540851610', NULL, '0', NULL, '111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, '2019-04-30', '2019-05-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420794068994', '2019C23', '大渡河硬梁包水电站首部枢纽区、刘河坝工区、厂区枢纽区地形图测绘', NULL, '0', '0', NULL, '尹建辉', '87399814', NULL, '0', NULL, '110,111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420827623425', '2019C26', '西昌东河水库、西昌三河一海坐标系转换', NULL, '1', '0', NULL, '吴东利', '87399879', NULL, '0', NULL, '111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, '2019-05-09', '2019-05-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420861177858', '2019C28', '四川省汉源县垫高造地地形图测绘', 83, '0', '0', NULL, '梁雪坷', '15882141290', NULL, '0', NULL, '111', NULL, 83, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420903120898', '2019C31', '广东省惠州市金山新天地水环境综合整治工程地形图测绘', 49, '0', '0', '0236', NULL, NULL, NULL, '0', NULL, '110,111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, '2019-04-10', '2020-08-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420936675329', '2019C33', '尼泊尔沙拉公路修复改善项目配合测量', NULL, '0', '0', NULL, '李毅', '13688050092', NULL, '0', NULL, '111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881420970229761', '2019C36', '重庆潼南双江航电枢纽项目地形图坐标系转换', 46, '0', '0', NULL, '李思嘉', '18190690323', NULL, '0', NULL, '111', NULL, 139, NULL, '2019-10-29', NULL, NULL, '2019-07-17', '2019-07-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421003784193', '2019C38', '叶巴滩水电站库区交通公路江边地形图、坝区潜在不稳定体地形图补测', NULL, '1', '0', NULL, '张冲', '13678146808', NULL, '0', NULL, '108,110', NULL, NULL, NULL, '2019-10-29', NULL, NULL, '2019-07-25', '2019-07-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421041532929', '2019C39', '雅砻江两河口水电站普巴绒集镇垃圾填埋场1:500地形地类图', 51, '0', '0', NULL, '刘建', '1398217008', NULL, '0', NULL, '110,111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421075087361', '2019C41', '大渡河双江口水电站双柏树移民安置点钻孔及断面测量', 120, '1', '0', NULL, '梁宇', '13908170231/65712230', NULL, '0', NULL, '202', NULL, 120, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421108641794', '2019C43', '金沙江溪洛渡水电站库区公路地形图补测', 83, '0', '0', NULL, '高绍清', '13547966733', NULL, '0', NULL, '111', NULL, 83, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421142196225', '2019C44', '雅砻江锦屏一级水电站枢纽区1:2000地形图测绘', 33, '1', '0', '0231', '刘忠绪', '13688357635', NULL, '0', NULL, '110', NULL, 33, NULL, '2019-10-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421175750658', '2019C46', '芦山县“8.23”特大洪水灾后复建工程测绘', 61, '0', '0', '0229', NULL, NULL, NULL, '0', NULL, '111', NULL, 61, NULL, '2019-10-29', NULL, NULL, '2019-08-31', '2019-10-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421209305089', '2019C47', '岷江流域“8.20”泥石流灾害恢复设计地形图测绘', NULL, '0', '0', '0231', '陈秋华', '13708001725', NULL, '0', NULL, '111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, '2019-09-05', '2019-09-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421242859521', '2019C49', '大渡河双江口水电站外部供水工程地形图补测', 61, '0', '0', '0227', '欧玉鹏', '13688028219', NULL, '0', NULL, '111', NULL, 33, NULL, '2019-10-29', NULL, NULL, '2019-09-19', '2019-09-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421276413954', '2019C50', '沱江河(江阳段)河湖管理范围划定项目测绘', NULL, '0', '0', '0231', '陈涛', '13550222198', NULL, '0', NULL, '110,111', NULL, NULL, NULL, '2019-10-29', NULL, NULL, '2019-10-08', NULL, NULL, NULL, NULL, NULL, NULL, '5', '130', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421301579777', '2020C68', '硬梁包水电站拟矿区坐标转换（补登）', 51, '0', '1', '0231', '王锋', '13981906689、87499048', '坐标转换', '0', 22, '110', 10, NULL, NULL, '2019-10-24', NULL, '2019-10-24', '2019-10-09', '2019-10-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421318356994', '2019C55', '西昌东河水库供水综合工程坝区1：1000放大地形图', 33, '1', '0', '0231', '吴东利', '028-87399879、13880559637', '其它测绘项目', '0', 22, '110', 10, NULL, NULL, '2019-10-22', NULL, '2019-10-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421335134209', '2019C54', '天星坝水库地形地类图补测', NULL, '0', '0', '0227', '欧玉鹏', '13688028219', '其它测绘项目', '0', 20, '111', 10, NULL, NULL, '2019-10-21', NULL, '2019-10-22', '2019-10-23', '2019-11-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421351911426', '2019C53', '猴子岩水电站菩提河坝安置点和土地复垦区地形图测绘', 101, '1', '0', '0227', '李鑫', '13518143295', '其它测绘项目', '0', 20, '112', 10, 101, NULL, '2019-10-15', NULL, '2019-10-16', '2019-10-20', '2019-10-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421368688642', '2019C52', '大渡河长河坝水电站汤坝料场坐标转换（转成2000坐标系）', 47, '0', '0', '0227', '张波', '13981957088', '坐标转换', '0', 22, '112', 10, 101, NULL, '2019-10-12', NULL, '2019-10-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421385465858', '2019W25', '四川嘉陵江桐子壕航电枢纽上游束水墙铺盖监测', 61, '0', '1', '0165', '谭处长', '18980337505', '工程监测', '0', 22, '108,111', 10, 61, NULL, '2019-10-10', NULL, '2019-10-10', '2019-10-20', '2020-09-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421402243074', '2019W24', '石棉县流域面积1000km²以上河流河道管理范围划定服务采购项目', 46, '0', '1', '0156', NULL, NULL, '河湖划定', '0', 23, '111', 10, 71, NULL, '2019-10-08', NULL, '2019-10-08', '2019-10-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421414825986', '2019C51', '大渡河猴子岩水电站汗牛公路测量', 101, '1', '0', '0229', '王宏', '13981957088', '公路测量', '0', 22, '112', 10, 101, NULL, '2019-10-08', NULL, '2019-10-07', '2019-10-09', '2019-10-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421427408898', '2019W35', '四川省雅砻江两河口水电站工程测量中心服务（2019年）', 122, '0', '1', '0200', NULL, NULL, '工程测量中心', '0', 22, '201', 10, 122, NULL, '2019-01-07', NULL, '2019-01-08', '2019-01-01', '2019-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421444186113', '2019W36', '四川大渡河双江口水电站枢纽工程测量中心服务（2019年）', 120, '1', '1', '0159', NULL, NULL, '工程测量中心', '0', 22, '202', 10, 120, NULL, '2019-01-07', NULL, '2019-01-08', '2019-01-01', '2025-05-01', '四川大渡河双江口水电站枢纽工程测绘技术服务合同', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421460963330', '2019C66', '两河口移民代建工程施工测量测绘服务（2019年）', 112, '1', '0', '0226', NULL, NULL, '工程测量中心', '0', 22, '106', 10, 112, NULL, '2019-01-07', NULL, '2019-01-08', '2019-01-01', '2019-12-31', '两河口移民代建工程施工测量技术服务合同', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421477740546', '199801001', '红叶二级(黄土坡)电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421494517761', '199801002', '康定木格措', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421511294978', '199801003', '南川市鱼跳水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421528072194', '199801004', '宝兴河硗碛水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421544849409', '199801005', '嘉陵江南充青居电站  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421557432321', '199801006', '涪江射洪县柳树段防洪工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421574209538', '199801007', '涪江射洪县柳树段防洪工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421586792450', '199801008', '狮子坪电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421599375362', '199801009', '宝兴县西河若壁沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421611958273', '199801010', '杂谷脑河狮子坪电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421628735489', '199801011', ' 1.米易县丙谷镇 2.盐边县红格镇', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421645512705', '199801012', '姚河坝电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421662289921', '199801013', '金口河永乐电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421674872834', '199801014', '嘉陵江草街航电枢纽工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421691650050', '199801015', '卧龙', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421712621570', '199801016', '西藏林芝八一三级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421725204481', '199801018', '关口镇500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421741981698', '199801019', '金峰乡500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421754564609', '199801020', '都江堰', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421767147522', '199801021', '二滩水库', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421783924738', '199801022', '嘉陵江青居水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421796507649', '199801023', '都江堰市大观场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421813284866', '199801024', '云南省巧家县十里坪移民址引水工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421830062081', '199801025', '金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421846839298', '199802001', '峨边县金峨电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421867810818', '199802002', '狮子坪电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421901365249', '199802003', '宝兴县  杂谷脑河 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421943308290', '199802004', '宝兴县东河跷碛电\\黑水河电站\\田湾河青杠坡\\舟坝洋西沟料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421968474113', '199802005', 'YHSOURCE', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881421989445634', '199802006', '舟坝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422014611458', '199802007', '田湾仰天窝 小天都 姚河坝 古城 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422043971585', '199802008', '田湾隧洞 仰天窝 小关子电站 舟坝牛尾沟 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422069137409', '199802009', '田湾大发厂址1\\田湾界碑石1\\田湾金窝厂址1\\田湾仰天窝调压井1(放)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422094303234', '199802010', '金银台加工厂5\\康定木格措5百\\南川鱼跳2\\狮子坪隧洞5(14-26)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422123663362', '199802011', '姜射坝闸址百5\\金银台料场1\\刘本坚金口河5\\田湾仁中海1', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422144634882', '199802012', '黑水色尔古厂址2\\黑水徐古闸址2\\金鹅坝区5百\\刘本坚毕棚沟5', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422173995009', '199802013', '古城横断面1\\黑水色尔古闸址2\\姜射坝厂址5百\\桑坪5百', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422203355137', '199802014', '黑水徐古厂址2\\姜射坝2支洞5百\\康定木格措5\\狮子坪丘地2', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422228520962', '199802015', '官地水电站 \\黑水河徐古电站 嘉陵江金银台电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422257881089', '199802016', '大渡河沿河 仁宗海水电站隧洞区 大发电站隧洞区 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422287241217', '199802017', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422312407041', '199802018', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422341767169', '199802019', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422366932993', '199802020', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422396293121', '199802021', ' 溪落渡水电站集镇 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422425653250', '199802022', '下允角500成果\\雅砻江牙根水电站\\永善500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422455013378', '199802023', '卧龙油竹坪\\乌东德电站\\溪洛渡移民\\大渡河瀑布沟水电站任家湾', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422480179201', '199802024', '大渡河木足水电站坝区\\娜允\\美姑河牛牛坝水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422505345025', '199802025', '尼日河规划\\渠江\\南桠河栗子坪水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422522122241', '199802026', '岷江福堂坝水电站\\二滩电站开挖竣工地形图\\金沙江溪落渡电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422538899458', '199802027', '福堂坝水电站\\色尔古厂.2千\\色尔古闸.2千\\徐古厂.2千\\徐古水库.1万\\徐古水库.1万', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422555676673', '199802028', '红石沟\\金盖\\金银台\\若壁沟.5千', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422568259585', '199802029', '康定木格措瑶池\\雅砻江两河口电站 冶勒电站水库淹没移民区土地调查图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422585036801', '199802030', '姜射坝\\金河施控网\\硗碛隧洞.5千\\水富码头', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422601814017', '199802031', '江津正式图\\外协\\物探\\宝兴河小关子电站管桥断面图.5百\\宝兴河小关子电站开关站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422618591234', '199802032', '金盘子\\木格错\\自一里\\金口河隧道区地形图.5千', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422635368450', '199901001', '金沙江溪洛渡电站坝区地形图1/2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422647951361', '199901002', '二滩水电站泄洪区地形图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422660534273', '199901003', '岷江福堂坝水电站导流洞1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422677311490', '199901004', '康定木格措地形图5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422710865922', '199901005', '康定木格措风景区芳草坪地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422748614657', '199901006', '马边河舟坝电站干坝沟公路带状地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422782169089', '199901007', '米易县丙谷镇二大队八队移民址地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422819917825', '199901008', '成都市自来水六厂扩建工程(B厂)汇流井地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422853472257', '199901009', '涪江射洪县柳树段防洪工程地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422887026690', '199901010', '狮子坪电站关田粘土料场地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422924775425', '199901011', '田湾河仁宗海水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422958329858', '199901012', '西坝变电站地形图200', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881422991884289', '199901013', '金沙江溪洛渡水电站坝区地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423029633026', '199901014', '西藏林芝八一三级水电站左厂区地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423067381762', '199901015', '西藏林芝八一三级水电站左厂区地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423100936194', '199901016', '姚河坝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423134490625', '199901017', '二滩水电站泄洪区地形图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423172239361', '199901018', '岷江福堂坝水电站导流洞地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423209988098', '199901019', '康定木格措地形图5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423243542530', '199901020', '康定木格措风景区芳草坪地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423281291265', '199901021', '成都市自来水六厂扩建工程(B厂)汇流井地形图200', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423319040002', '199901022', '涪江射洪县柳树段防洪工程地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423352594434', '199901023', '涪江射洪县柳树段防洪工程地形图5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423386148865', '199901024', '狮子坪电站九架棚沟坝壳料场地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423423897602', '199901025', '田湾河仁宗海水电站地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423457452034', '199901026', '米易县丙谷镇二大队八队移民址地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423495200769', '199901027', '红叶二级(黄土坡)电站厂址地形图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423528755202', '199901028', '西坝变电站地形图200', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423566503937', '199901029', '西藏昌都城区防洪工程地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423600058370', '199901030', '西藏昌都城区防洪工程地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423633612801', '199901031', '西藏林芝八一三级水电站左厂区地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423667167234', '199901032', '西藏林芝八一三级水电站左厂区地类地形图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423709110273', '199901033', '金沙江溪洛渡水电站坝区地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423746859010', '199901034', '金沙江溪洛渡水电站库区云南省巧家县蒙姑乡十里坪移民新址地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423776219138', '199901035', '金沙江溪洛渡水电站库区永善县黄华乡甘田村村公所新址地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423801384962', '199901036', '金沙江溪洛渡水电站库区永善县黄华乡青岗村集镇地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423826550785', '199901037', '金沙江溪洛渡水电站库区金阳县小银木乡松林村移民址地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423847522305', '199901038', '金沙江溪洛渡水电站库区青江乡 米 新址地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423864299521', '199901039', '金沙江溪洛渡水电站金阳县双龙坝乡移民安置区地形地类图1', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423881076738', '199901040', '金沙江溪洛渡水电站金阳县双龙坝乡移民安置区地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423897853953', '199901041', '金沙江溪落渡水电站库区永善县黄坪乡新址地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423914631169', '199901042', '金阳县德谷沟二级电站厂址地形图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423927214081', '199901043', '马边河舟坝电站干坝沟公路带状地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423948185602', '200001001', '马边河舟坝电站坝址地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423964962817', '200001002', '锦屏电站库区地形地类图5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423981740033', '200001003', '冶勒水电站三岔河石料场地形图、断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881423998517249', '200001004', '云南省巧家县十里坪移民址引水工程新设渠道石匠房沟泉眼处地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424015294465', '200001005', '四川省金阳县松林坪移民址引水工程泉水沟地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424032071681', '200001006', '二滩水库下游河床变形观测横断面图200', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424048848897', '200001007', '嘉陵江青居水电站闸址区地形图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424061431809', '200001008', '四川省金阳县仓房水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424078209025', '200001009', '大渡河瀑布沟  1.坝区地形图2000     2.尼日河引水闸址区地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424094986242', '200001010', '大渡河瀑布沟坝区地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424107569154', '200001011', '太平驿水电站调 压井地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424120152065', '200001012', '云南巧家县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424136929282', '200001013', '康定日地沟地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424149512193', '200001014', '康定瓦斯沟沟口地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424166289410', '200001015', '成勘院紫坪铺水文站地形图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424199843841', '200001016', '杂谷脑河梯级调度中心大楼地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424237592577', '200001017', '瀑布沟电站尼日河引水闸址区地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424275341313', '200001018', '火溪河水牛家水电站地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424308895746', '200001019', '福堂水电站施工用电变电站地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424346644482', '200001020', '都江堰', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424380198914', '200001021', '金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424413753346', '200001022', '金沙江溪落渡电站水富码头出港公路纵断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424451502081', '200001023', '金沙江溪洛渡水电站水富码头地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424485056513', '200001024', '金沙江溪洛渡电站库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424510222338', '200001025', '金风乡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424531193857', '200001026', '黄家村测绘队平面图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424552165377', '200001027', '宝兴县东河民治水电站 \\瀑布沟水电站\\硗碛\\宝兴县小沟头水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424568942593', '200001028', '硗碛\\乌东德基地\\雅砻江工委1000\\万工1000\\小堡1000\\迎政2000\\宰羊2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424585719809', '200001029', '草街\\永定桥渠线断面\\宰羊1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424602497025', '200001030', '宝兴小沟头水电站库区地形图 2000\\崇义\\甘洛2000\\官地库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424623468545', '200101001', '都江堰', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424640245761', '200101002', '江津防洪', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424657022978', '200101003', '江津防洪1', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424677994497', '200101004', '锦屏坝厂区断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424703160321', '200101005', '锦屏坝址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424719937538', '200101006', '锦屏断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424736714753', '200101007', '锦屏辅助工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424753491970', '200101008', '瀑布沟成品图（库区、流沙河、乌斯河）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424770269186', '200101009', '瀑布沟公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424791240706', '200101010', '水磨', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424808017921', '200101011', '图廓', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424824795138', '200101012', '大渡河瀑布沟水电站乌斯河工区地形图 1:2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424841572354', '200101013', '昌都金河\\崇洲温江\\红叶\\苏只\\溪洛渡\\人宗海\\新政\\桐子林', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424858349570', '200101014', '直孔成品图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424879321089', '200101015', '直孔断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424896098306', '200101016', '瀑布沟公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424912875521', '200101017', '瀑布沟接边图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424929652738', '200101018', '瀑布沟控制网布置图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424950624258', '200101019', '瀑布沟面积图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424971595778', '200101020', '瀑布沟引水工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881424992567297', '200101021', '青城湖渡假村', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425009344514', '200101022', '图廓', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425026121729', '200101023', '直孔接边图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425042898946', '200101024', '雅 江锦屏一级电站辅助工程  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425059676161', '200101025', '汉源引水工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425076453377', '200101026', '锦屏坝厂区断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425093230593', '200101027', '锦屏辅助工程  老沟  博凹', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425110007810', '200101028', '瀑布沟移民（大田移民安置区、永定桥、许家沟、大岩窝）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425130979329', '200101029', '沙溪电站下坝址1:1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425147756545', '200101030', '四川坪子', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425168728066', '200101031', '直孔公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425189699586', '200101032', '重庆变电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425210671105', '200101033', '2001二滩断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425227448322', '200101034', '崇州温江', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425244225538', '200101035', '大渡河沿河1万（63-198）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425261002754', '200101036', '都江堰', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425277779969', '200101037', '二滩断面12月', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425290362882', '200101038', '红叶库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425302945793', '200101039', '大渡河瀑布沟水电站库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425319723010', '200101040', '黄河苏只', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425336500226', '200101041', '火溪河厂坝址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425357471745', '200101042', '夹江', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425370054658', '200101043', '江津防洪1', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425386831873', '200101044', '金河电站\\锦屏', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425403609089', '200101045', '锦屏辅助工程\\锦屏库区34\\尼日河断面\\瀑布沟\\瀑布沟成品图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425420386305', '200101046', '瀑布沟公路\\青城湖\\仁宗海\\水磨\\桐子林\\桐子林1\\图廓\\乌斯河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425432969217', '200101047', '乌斯河\\溪洛渡\\新政杂谷脑\\直孔\\紫坪铺', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425445552130', '200101048', '昌都金河电站\\崇州市隆兴镇\\崇州市\\大渡河瀑布沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425462329345', '200101049', '都江堰\\二滩水库\\红叶二级电站水库地形图\\火溪河水牛家', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425474912257', '200101050', '夹江县\\嘉陵江新政水电站图\\金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425491689474', '200101051', '尼日河口仁宗海桐子林', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425508466690', '200102001', '雅砻江锦屏电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425521049602', '200102002', '锦屏大金河土调\\锦屏控制\\锦屏土调文档', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425537826818', '200102003', '雅砻江锦屏电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425554604033', '200102004', '雅砻江锦屏电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425579769858', '200102005', '金沙江溪洛渡电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425613324290', '200102006', '金沙江溪洛渡电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425646878721', '200102007', '金沙江溪洛渡电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425680433154', '200102008', '溪洛渡公路最新\\溪洛渡水库干海子滑坡地形图.5千\\新政', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425718181889', '200102009', '雅砻江锦屏电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425751736321', '200102010', '小天都\\院建\\雅砻江锦屏电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425785290753', '200102011', '青羊国土', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425823039490', '200102012', '田湾\\西藏林芝\\杂谷脑河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425856593922', '200102013', '沙牌\\舟坝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881425894342658', '200102014', '古城薛城\\双江口水电站库区地类图\\溪洛渡交通桥', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426011783169', '200102015', '卧龙500\\溪洛渡坝区水下\\溪洛渡地形地类\\薛城坝址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426074697729', '200102016', '大渡河双江口水电站溪洛渡水电站薛城库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426112446465', '200102017', '溪洛渡基准网观测工作量及技术要求\\二滩大坝变形大地测量网投标', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426146000898', '200201001', '草街库区\\民治5000\\田湾500旧', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426183749634', '200201002', '田湾\\卧龙\\下尔呷2000\\丹巴2000\\孔玉2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426217304065', '200201003', '硗碛500\\硗碛1000\\团结桥纵断面\\乌东德电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426250858498', '200201004', '下尔呷雅砻江工委1000\\锦屏一级水电站\\瀑布沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426292801537', '200201005', '草街航电工程库区横断面图\\草街原图\\草街闸址2000\\大渡河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426330550273', '200201006', '都江堰\\二滩坝后水下\\甘洛2000\\红叶渣场\\锦屏', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426368299009', '200201007', '瀑布沟水电站任家湾沙溪水电站狮子坪水电站官地电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426427019265', '200201008', '草街10000补充\\草街横断面\\草街闸址2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426464768002', '200201009', '水牛家水电站 硗碛万工\\小堡\\迎政\\宰羊\\宝兴县小沟头', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426498322434', '200201010', '宝兴县东河硗碛水电站 瀑布沟水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426523488257', '200201011', '大渡河长河坝电站大岗山电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426544459778', '200201012', '\\大渡河马奈坝区地形图\\太阳河口电站-放大', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426565431298', '200201013', '草街航电\\大渡河沿河\\二滩二道坝\\冶勒\\乌东德电站\\小堡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426586402817', '200201014', '嘉陵江草街航电\\民治\\二道坝 三滩沟\\大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881426603180033', '200201015', '草街\\大渡河10000\\下尔呷水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881427974717442', '200401001', '瀑布沟水电站三交坪', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881427991494658', '200401002', '雅砻江桐子林水电站库区/工程区地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428012466177', '200401003', '木里河流域规划放大地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428029243393', '200401004', '瀑布沟资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428062797826', '200401005', '瀑布沟任家湾移民安置区地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428096352258', '200401006', '宝兴县陇东出局沟水电站厂区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428134100994', '200401007', '木里河沙湾水电站库区地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428167655426', '200401008', '雅砻江中游', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428209598466', '200401009', '宝兴西河出局沟水电站坝区地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428234764290', '200401010', '雅砻江中游规划沿河带状地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428259930114', '200401011', '大渡河双江口水电站 黑水河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428280901634', '200401012', '嘉陵江草街航电枢纽工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428301873154', '200401013', '美姑河牛牛坝水电站厂区地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428327038977', '200401014', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428348010497', '200401015', '龙滩2004年复测观测值最终成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428364787713', '200401016', '木里河固增水电站雅砻江锦屏一级水电站岷江', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428385759234', '200401017', '大渡河瀑布沟水电站大田移民安置地类1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428402536449', '200401018', '金沙江溪洛渡电站坝区地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428419313665', '200401019', '雅砻江两河口水电站库区地类图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428448673793', '200401020', '雅砻江两河口水电站料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428461256706', '200401021', '木里河沙湾水电站厂址区地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428478033922', '200401022', '宝兴河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428494811137', '200401023', '大渡河泸定/黄金坪水电站坝区地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428511588353', '200401024', '美姑河（牛牛坝水电站坪头水电站）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428528365570', '200401025', '大渡河瀑布沟许家沟水利工程系列地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428545142786', '200401026', '大渡河瀑布沟水电站罗卜岗移民址1∶1000/1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428561920001', '200401027', '大渡河瀑布沟汇总资料（1）坝区/库区等', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428578697217', '200402028', '大渡河瀑布沟汇总资料（2）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428595474433', '200402029', '大渡河瀑布沟汇总资料（3）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428612251650', '200402030', '大渡河瀑布沟水电站许家沟水利工程补充地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428629028865', '200402031', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428645806081', '200402032', '涪江规划测量（河道纵断面/古城/南坝/铁笼堡地形图）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428662583297', '200402033', '岷江黑水河柳坪水电站隧洞区1∶5000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428679360514', '200402034', '岷江（渭门水电站十里铺水电站）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428696137729', '200402035', '岷江黑水河色尔古水电站（无量河）理塘段毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428717109250', '200402036', '木里河固增水电站（引水线路地形图1∶5000/闸址地类图1∶1000）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428750663681', '200402037', '涪江规划测量（所有涪江电站的 成果及地形图）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428784218114', '200402038', '岷江流域（茂县段）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428817772546', '200402039', '岷江黑水河色尔古水电站柳坪水电站坝址横断面图；渭门水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428847132674', '200402040', '岷江黑水河柳坪水电站涪江古城水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428868104194', '200402041', '岷江流域（宁江堡/色尔古坝区/渭门坝区1∶1000；十里铺1∶500）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428884881409', '200402042', '杂谷脑河狮子坪水电站邱地村料场地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428901658626', '200402043', '嘉陵江草街航电枢纽工程打石湾人工骨料场地形1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428918435841', '200402044', '嘉陵江草街航电枢纽工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428935213058', '200402045', '瀑布沟移民规划芦山/名山地形地类图1∶500（一）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428951990273', '200402046', '瀑布沟移民规划芦山/名山地形图及成果（二）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428968767489', '200402047', '瀑布沟移民规划芦山/名山资料（三）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428985544706', '200402048', '杂谷脑河古城/薛城水电站闸址河道平面图/纵断面图（一）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881428998127617', '200402049', '杂谷脑河古城/薛城水电站上、下厂址/闸址纵断面图（二）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429014904833', '200402050', '大渡河瀑布沟水电站石棉县白马移民地形图1∶2000/1∶200', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429035876353', '200402051', '大渡河金川水电站坝区地形图1∶2000  金川库区土地调查表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429073625089', '200402052', '狮子坪施工控制网复测成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429107179521', '200402053', '南桠河治勒水电站渣场全部资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429144928258', '200402054', '雅砻江锦屏水电站西昌盐源县梅雨镇移民安置1∶500地类', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429174288385', '200402055', '雅砻江两河口水电站征地勘测定界图1∶500及成果资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429195259906', '200402056', '美姑河坪头水电站闸址1∶1000及纵断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429216231425', '200402057', '岷江渭门/十里铺水电站库区1∶5000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429233008641', '200402058', '大渡河绰斯甲河流域规划色尔渠河道平面图1∶50000/纵断面图/成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429249785858', '200402059', '大渡河深溪沟水电站关村坝营地地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429262368769', '200402060', '大渡河长河坝电站孔玉电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429283340289', '200402061', '嘉陵江草街航电枢纽工程坝区地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429295923201', '200402062', '大渡河流域俄热河河道平面图1∶50000及纵断面图和成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429312700418', '200402063', '俄日河厂房/闸址；斯约武闸址；沙湾引水（木里河）；岷江十里铺', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429329477633', '200402064', '木里河固增水电站闸址/茶布朗沟图/下撕洼图/控制成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429346254850', '200402065', '雅砻江官地水电站库区地类图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429363032065', '200402066', '岷江十里铺电站坝区1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429375614978', '200402067', '西藏雪隆藏布门巴水电站地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429392392193', '200402068', '大渡河大岗山水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429404975105', '200402069', '瀑布沟水电站白马安置区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429421752321', '200402070', '大渡河瀑布沟水电站永定桥供水工程人工骨料场1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429438529537', '200402071', '大渡河瀑布沟水电站库区地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429455306753', '200402072', '金沙江溪洛渡水电站右岸缆机平台纵横断面及成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429472083969', '200402073', '大渡河金川水电站料场地形图（得胜梯/马厂/双柏树/金川）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429484666881', '200403074', '西藏扎雪水电站库区1∶5000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429497249793', '200403075', '大渡河绰斯甲河地形图及色尔曲河道', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429522415618', '200403076', '大渡河绰斯甲河沿河1∶10000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429539192833', '200403077', '大渡河绰斯甲河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429551775745', '200403078', '雅砻江官地水电站生活区1∶5000、坝区1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429568552961', '200403079', '木里河沙湾水电站厂址区1∶500地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429585330177', '200403080', '雅砻江官地水电站生活区/工程区1∶5000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429602107393', '200403081', '大渡河瀑布沟库区永定桥水库', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429614690305', '200403082', '金沙江溪洛渡水电站溪洛渡沟垃圾场1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429631467521', '200403083', '美姑河坪头水电站厂区地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429648244737', '200403084', '大渡河枕头坝电站坝区1∶2000地形图及纵横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429669216257', '200403085', '西藏雪隆藏布门巴电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429702770690', '200403086', '大渡河双江口电站金川移民址1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429736325121', '200403087', '大渡河巴旺电站坝址区1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429765685250', '200403088', '美姑河坪头水电站伞地沟地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429799239682', '200403089', '美姑河坪头水电站厂区地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429832794113', '200403090', '大渡河水卡子水电站丹巴水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429866348546', '200403091', '雅砻江锦屏一级水电站草街航电枢纽工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429899902978', '200403092', '大渡河瀑布沟移民规划测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429933457410', '200403093', '大渡河黄金坪水电站上、中坝址1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881429967011842', '200403094', '大渡河马奈电站坝区1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430000566274', '200403095', '嘉陵江草街航电枢纽工程桥头湾渣场1∶2000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430034120706', '200403096', '黑水县打古冰川水电站厂区1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430067675138', '200403097', '都江堰成勘院上下基地1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430101229569', '200403098', '俄日河水电规划沿河放大1∶10000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430134784001', '200403099', '杂谷脑河狮子坪水电站梅多沟/大沟石料场1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430172532737', '200403100', '大渡河泸定水电站库区1∶2000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430206087170', '200403101', '雅砻江官地水电站库区1∶5000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430243835906', '200403102', '木里河阳山料场沙湾水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430264807426', '200403103', '俄日河地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430285778946', '200403104', '白水江双河口电站深溪沟电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430306750465', '200403105', '白水江双河口电站地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430323527682', '200403106', '大渡河猴子岩水电站坝区1∶2000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430340304898', '200403107', '大渡河俄日河水电站规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430357082113', '200403108', '美姑河坪头水电站瓦吉吉水电站木里河俄公堡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430373859330', '200403109', '黄金坪水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430386442241', '200403110', '美姑河坪头水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430407413761', '200403111', '美姑河瓦吉吉、瓦洛水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430419996673', '200403112', '大渡河猴子岩水电站坝区1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430440968193', '200403113', '大渡河瀑布沟水电站许家沟水库', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430478716930', '200403114', '大渡河长河坝水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430512271362', '200403115', '美姑河坪头水电站施工/业主营地1∶200地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430545825794', '200403116', '美姑河牛牛坝电站建设/施工营地1∶200', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430579380226', '200403117', '岷江渭门水电站库区滑坡1∶5000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430617128962', '200403118', '大渡河猴子岩水电站坝区1∶2000地形图（含水下地形）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430650683394', '200403119', '大渡河马奈电站坝区1∶1000地形图（不含水下）资用', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430684237825', '200403120', '美姑河牛牛坝水电站业主营地1∶1000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430717792258', '200403121', '雅砻江官地水电站大盐池1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430755540994', '200403122', '大渡河尼日河卡尔沟水电站厂址1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430784901122', '200403123', '大渡河尼日河引水首部枢纽交通洞1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430818455554', '200403124', '大渡河瀑布沟水电站许家沟水利工程主干渠1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430847815682', '200403125', '大渡河猴子岩水电站施工营地1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430868787201', '200403126', '木里河固增电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430889758722', '200403127', '美姑河牛牛坝水电站料场1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430906535937', '200403128', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430923313154', '200403129', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430940090369', '200403130', '大渡河马奈电站坝区1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430956867585', '200404131', '大渡河瀑布沟电站广华村移民址1∶500地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430973644801', '200404132', '雅砻江两河口电站工程区1∶5000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881430990422018', '200404133', '大渡河泸定水电站坝区1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431007199234', '200404134', '重庆市嘉陵江草街航电枢纽工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431023976450', '200404135', '大渡河猴子岩电站折洛土料场1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431040753665', '200404136', '雅砻江两河口电站料场地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431057530882', '200404137', '美姑河瓦洛水电站库区1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431074308097', '200404138', '大渡河猴子岩电站梭坡乡滑坡1∶5000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431091085314', '200404139', '大渡河黄金坪水电站上、中坝址水下1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431112056833', '200404140', '岷江渭门电站滑坡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431149805570', '200404141', '美姑河引年入牛工程1∶5000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431183360002', '200404142', '大渡河瀑布沟电站汉源县城新址萝卜岗', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431221108738', '200404143', '大渡河猴子岩电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431254663170', '200404144', '大渡河猴子岩电站库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431288217601', '200404145', '木里河固增水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431321772034', '200404146', '雅砻江桐子林电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431359520769', '200404147', '雅砻江桐子林电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431393075201', '200404148', '大渡河黄金坪横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431426629633', '200404149', '大渡河瀑布沟电站石棉/汉源移民址测绘1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431468572673', '200404150', '华阳电器厂房屋面积量算', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431506321409', '200404151', '桐子林水电施工测量控制网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431539875841', '200404152', '宝兴跷蹊水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431581818882', '200404153', '大渡河瀑布沟电站永定桥主干渠/右干渠/左干渠地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431615373314', '200404154', '大渡河瀑布沟电站许家沟主干渠地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431653122050', '200404155', '美姑河牛牛坝水电站施工控制网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431686676482', '200404156', '西藏藏呷水电站库区1∶10000放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431724425217', '200404157', '金沙江上游1∶5万扫描地形图33张（青海玉树－竹巴龙）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431757979649', '200404158', '2005广西龙滩电站施工测量控制网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431791534081', '200501001', '木里河卡基娃水电站厂址横断面及跷蹊电站东河防护工程断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431829282817', '200501002', '木里河卡基娃水电站工程区1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431862837249', '200501003', '木里河卡基娃水电站库区1∶5000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431896391681', '200501004', '木里河卡基娃水电站坝区1∶1000地形图、唐央滑坡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431950917634', '200501005', '木里河卡基娃水电站工程区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881431984472065', '200501006', '木里河卡基娃水电站坝址区、工程区地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432022220801', '200501007', '木里河卡基娃水电站上、下厂址1∶1000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432055775233', '200501008', '木里河卡基娃水电站工程区、坝区地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432093523970', '200501009', '木里河卡基娃水电站地形地类测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432131272705', '200501010', '锦屏大奔流、九龙河口料场、大沱、印坝子、洋房沟、木落脚', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432169021441', '200501011', '九寨沟多诺水电站1∶2000料场地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432206770178', '200501012', '九寨沟县白水江青龙电站多诺电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432240324609', '200501013', '九寨沟县白水江青龙电站厂区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432278073346', '200501014', '九寨沟多诺水电站渣场1∶2000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432315822082', '200501015', '九寨沟县白水江青龙电站地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432349376514', '200501016', '汉源萝卜岗', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432382930946', '200501017', '汉源萝卜岗1∶500、1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432420679681', '200501018', '瀑布沟汉源县新址萝卜岗1∶500、1∶1000地形测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432458428418', '200501019', '瀑布沟电站石棉、汉源移民安置点地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432496177154', '200501020', '足木足河1∶10000（缺170、179、180）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432529731585', '200501021', '北川1∶2000、1∶5000、1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432563286018', '200501022', '火溪河阴平水电站支洞口1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432601034754', '200501023', '大渡河卡尔沟水电站厂区地形补测图资料集及1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432634589185', '200501024', '金沙江上游1∶50000扫描地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432668143618', '200501025', '雅砻江桐子林电站施工测量控制网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432710086658', '200501026', '太阳河水电站1号支洞施工便道工程测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432747835394', '200501027', '成勘院电梯公寓沉降观测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432781389825', '200501028', '岷江十里铺库区1∶5000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432819138561', '200501029', '西藏雅鲁藏布江呷水电站库区放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432848498689', '200501030', '西藏羊湖电站压力钢管永久性变形监测首期观测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432882053122', '200502031', '西藏羊卓雍湖水电站进水口1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432919801858', '200502032', '跷蹊水电站 卡卡瓦集镇新址地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432961744897', '200502033', '宝兴河跷蹊水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881432995299329', '200502034', '跷蹊渣场 流沙河1∶2000图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433033048066', '200502035', '宝兴河跷蹊渣场1∶500地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433066602497', '200502036', '宝兴县东河跷蹊水电站九寨沟县白水江青龙电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433104351233', '200502037', '跷蹊电站东河防护工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433142099969', '200502038', '雅安市荥经县庙岗乡庙岗村地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433175654402', '200502039', '通口河邓家电站厂区、坝址1∶1000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433213403137', '200502040', '官地电站公路1∶500地形图、官地油库/炸药库1∶200', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433246957570', '200502041', '官地水电站1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433280512001', '200502042', '官地油库/炸药库1∶200', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433305677825', '200502043', '雅砻江官地水电站金河营地1∶200地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433351815169', '200502044', '雅砻江官地水电站施工测量控制网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433381175297', '200502045', '雅砻江官地水电站九寨沟白水江青龙水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433406341122', '200502046', '官地水电站大盐池营地1∶200地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433431506946', '200502047', '雅砻江官地电站大盐池营地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433460867073', '200502048', '美姑河瓦吉吉水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433490227201', '200502049', '美姑河牛牛坝尔马洛/西滑坡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433519587329', '200502050', '美姑河牛牛坝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433548947457', '200502051', '美姑河牛牛坝石膏厂料场 1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433574113282', '200502052', '美姑河牛牛坝依迁/巴古拉打滑坡1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433599279105', '200502053', '美姑河四千千1∶1000料场地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433628639234', '200502054', '美姑河牛牛坝年年沟料场1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433657999362', '200502055', '美姑河牛牛坝引年入牛工程1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433683165186', '200502056', '美姑河引年入牛工程1∶5000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433704136705', '200502057', '美姑河牛牛坝水电站施工控制网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433733496834', '200502058', '美姑河牛牛坝库区1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433754468354', '200502059', '美姑河坪头电站放大图1∶5000、施工营地地形图、5号渣场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433783828482', '200502060', '美姑河牛牛坝电站库区滑坡地形', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433808994305', '200502061', '美姑河坪头电站乐约沟/柳洪沟放大地形图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433834160130', '200502062', '美姑河坪头水电站5号渣场1∶2000、施工营地地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433859325953', '200502063', '龙头石水电站集镇、农田防护工程安顺及安清1∶2000地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433888686082', '200502064', '大渡河龙头石水电站集镇、农田防护工程安顺及安靖', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433913851905', '200502065', '大渡河深溪沟库区1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433939017729', '200502066', '大渡河深溪沟库区1∶2000地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433964183553', '200502067', '大渡河深溪沟变电站1∶200地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881433985155074', '200502068', '大渡河深溪沟电站苏古村营地1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434014515202', '200502069', '大渡河深溪沟电站苏古村营地进场公路1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434043875329', '200502070', '大渡河泸定移民址 大草坝/伞岗坪/五里沟移民', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434069041153', '200502071', '大渡河硬梁包电站放大图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434098401281', '200502072', '大渡河双江口电站阿斯布/大石函料场1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434123567106', '200502073', '大渡河巴底坝区1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434152927233', '200502074', '大渡河巴底水电站黄土岗料场及补充料场1∶1000地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434173898753', '200502075', '黑水河毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434199064577', '200502076', '瀑布沟永定桥主干渠/右干渠/左干渠1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434224230401', '200502077', '大渡河永定桥渡槽、隧道口、许家沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434249396225', '200502078', '大渡河永定桥渡槽、隧道口、主干渠/右干渠/左干渠', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434274562050', '200502079', '大渡河永定桥下坝址1∶1000地形图、坝轴线横断面成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434303922177', '200502080', '大渡河永定桥水利工程放大图范围1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434324893697', '200503081', '九寨沟多诺补测、永定桥库区1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434354253825', '200503082', '2005年田湾河控制网复测资料（2005年10月）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434375225346', '200503083', '田湾河梯级水电站施工控制网（2005年复测资料）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434404585473', '200503084', '金康水电站隧洞区1∶5000地形图、闸址区1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434425556994', '200503085', '双河水电站施工控制网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434454917122', '200503086', '金川水电站新扎沟内公路深溪沟水电站沟内', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434475888641', '200503087', '金沙江上游', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434505248769', '200503088', '金沙江溪洛渡电站移民规划1∶10000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434530414593', '200503089', '绰斯甲河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434568163330', '200503090', '杂谷脑河桑坪水电站；革什扎河泸定库区坪头渣场多诺电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434601717762', '200503091', '雅砻江牙根水电站坝址区1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434639466497', '200503092', '革什扎河二瓦槽水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434673020930', '200503093', '革什扎河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434706575362', '200503094', '黑水河毛尔盖水电站1∶1000地类地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434744324097', '200503095', '黑水河毛尔盖水电站1∶1000移民址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434777878530', '200503096', '黑水河毛尔盖水电站黑水县林业局科技园苗圃1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434811432961', '200503097', '西藏羊湖抽水蓄能电站压力钢管（明管段）变形监测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434849181697', '200503098', '锦屏一级大沱生活区1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434882736130', '200503099', '宝兴东河跷蹊水电站卡卡瓦地形地类图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434916290561', '200503100', '雅砻江沿河二滩高抗', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434949844994', '200503101', '溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881434979205121', '200503102', '长河坝水电站公路隧洞口左岸渣场等1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435008565249', '200503103', '长河坝电站料场黄金坪水电站料场1;2000地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435033731073', '200503104', '大渡河长河坝电站库区1∶2000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435058896897', '200503105', '大渡河长河坝电站库区1∶2000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435088257026', '200504106', '长河坝水电站、吉牛电站洞区、泸定电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435117617153', '200504107', '大渡河沿河1∶10000地形图 63-198', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435142782978', '200504108', '大渡河沿河1∶10000地形图（2005年8月）   63-198', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435172143105', '200504109', '大渡河巴底水电站坝址区1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435201503233', '200504110', '美姑河牛牛坝水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435226669057', '200504111', '美姑河牛牛坝水电站牛牛坝村移民安置点1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435251834881', '200504112', '美姑河牛牛坝水电站厂区永久桥址1∶500地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435281195009', '200504113', '美姑河牛牛坝水电站1＃2＃3＃渣场1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435306360834', '200504114', '美姑河柳洪水电站闸首左岸1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435331526658', '200504115', '官地水电站黑水河沟水处理用地1∶500地形图（出口）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435360886785', '200504116', '官地水电站黑水河沟水处理用地1∶500地形图（入口）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435390246913', '200504117', '官地水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435423801345', '200504118', '官地水电站大桥沟/虎山滩营地1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435461550081', '200504119', '黑水河毛尔盖电站施工测量控制网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435495104514', '200504120', '黑水县、麻窝、闸窝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435528658945', '200504121', '黑水河毛尔盖', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435566407681', '200504122', '通口河（', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435599962114', '200504123', '通口河漩坪水电站库区1∶2000地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435633516545', '200504124', '通口河漩坪水电站库区地类图、料场（望江/石纽）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435671265281', '200505125', '通口河漩坪水电站库区地类图、料场地形图、土调表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435704819713', '200505126', '通口河漩坪水电站库区、料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435738374145', '200505127', '金沙江上游水电开发规划沿河1∶10000放大图139幅', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435776122882', '200505128', '金沙江上游水电开发河道', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435813871617', '200505129', '金沙江上游坝址地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435847426049', '200505130', '金沙江上游规划坝区地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435880980481', '200505131', '金沙江上游水电规划、安顺场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435918729218', '200505132', '金沙江上游水电开发各电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435952283650', '200505133', '金沙江溪洛渡水电站库区1∶10000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881435998420993', '200505134', '阿坝铝厂场地稳定性监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436036169729', '200505135', '两河口/二瓦槽厂区、闸区、大桑闸区、大渡河（石棉）先锋', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436069724162', '200505136', '桐子林电站（原二滩电站料场）料场1∶1000地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436103278593', '200505137', '宝兴河跷蹊水电站白水江青龙电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436136833025', '200505138', '跷蹊地形图1∶1000/1∶5000(98年完成）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436174581761', '200505139', '大渡河金川水电站大渡河巴底电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436203941889', '200505140', '大渡河金川水电站（石家沟/周山堆料场1∶2000）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436241690625', '200505141', '青龙水电站施工控制网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436279439362', '200505142', '多诺水电站施工控制网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436312993793', '200505143', '雅砻江官地水电站金河营地1∶200地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436346548225', '200505144', '雅砻江官地水电站大桥沟1∶25000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436380102658', '200505145', '永定桥料场、库区  及文字资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436417851393', '200505146', '丹巴、革什扎河、大桑厂区、革什扎河两河口厂区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436451405825', '200505147', '大渡河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436489154561', '200505148', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436522708993', '200505149', '革什扎河、大桑水电站厂区地形地类图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436556263426', '200505150', '大渡河革什扎河吉牛水电站上、下闸区1∶500地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436589817857', '200505151', '大渡河大岗山水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436623372289', '200505152', '大渡河龙头石水电站新民乡移民安置区地类图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436656926722', '200505153', '革什扎河大桑电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436682092545', '200505154', '革什扎河吉牛水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436711452673', '200505155', '瀑布沟水电站移民址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436736618498', '200505156', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436765978625', '200505157', '大渡河革什扎河吉牛水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436795338754', '200506158', '美姑河牛牛坝水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436820504578', '200506159', '美姑河牛牛坝水电站牛牛坝村移民安置点1∶1000补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436845670402', '200506160', '绰斯甲河革什扎河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436875030529', '200506161', '狮子坪水电站石古磨沟地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436900196353', '200506162', '黑水河毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436925362177', '200506163', '泸定水电站施工测量控制网2005年复测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436954722305', '200506164', '雅砻江官地水电站坝址区地类图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881436979888129', '200506165', '雅砻江锦屏水电站肖昌沟、三滩渣场地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437009248257', '200506166', '雅砻江牙根水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437038608386', '200506167', '宝兴跷蹊水电站卡卡瓦引水工程地类1∶1000/断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437059579905', '200506168', '宝兴河民治水电站施工测量控制网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437088940034', '200506169', '宝兴河跷蹊水电站卡卡瓦引水工程纵横断面测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437114105858', '200506170', '大渡河长河坝水电站施工控制网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437143465985', '200506171', '大渡河猴子岩水电站折洛沟带状地形图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437168631809', '200506172', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437193797634', '200506173', '大渡河黄金坪水电站坝区地类图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437244129281', '200506174', '革什扎河二瓦槽电站料场及业主营地地类图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437277683714', '200506175', '革什扎河二瓦槽电站吉牛水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437315432450', '200506176', '两河口隧洞测量控制网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437348986881', '200506177', '大渡河金川水电站新扎沟石料场1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437382541313', '200506178', '大渡河龙头石水电站安顺/安靖防护工程横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437420290050', '200506179', '大渡河龙头石水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437453844482', '200506180', '龙头石水电站安靖/干海子/松岗村/宿大坪料场1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437487398913', '200506181', '双江口水电站松岗防护工程；成勘院石人小区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437520953346', '200506182', '大渡河双江口水电站库区地类图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437554507778', '200506183', '大渡河深溪沟水电站施工测量控制网2005年复测成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437588062209', '200506184', '大渡河深溪沟水电站施控网2005年复测成果及2004年', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437621616641', '200506185', '大渡河瀑布沟水电站建设征地汉源县右岸界桩像片（1）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437650976770', '200507186', '大渡河瀑布沟水电站建设征地汉源县左岸界桩像片（2）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437684531201', '200507187', '大渡河瀑布沟水电站建设征地像片（3）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437722279937', '200507188', '大渡河瀑布沟水电站建设征地石棉县左岸界桩像片（4）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437755834370', '200507189', '大渡河瀑布沟水电站建设征地影响区界桩像片（5）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437789388802', '200507190', '大渡河瀑布沟水电站建设征地枢纽区界桩像片（6）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437822943234', '200507191', '大渡河瀑布沟水电站建设征地界桩图纸及测量报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437856497665', '200507192', '大渡河瀑布沟水电站建设征地成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437894246401', '200507193', '大渡河瀑布沟水电站建设征地干流点之记', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437927800834', '200507194', '大渡河瀑布沟水电站建设征地影响区/施工区点之记', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437961355265', '200601001', '大渡河长河坝水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881437994909697', '200601002', '大渡河长河坝水电站野坝/江咀安置点及横断面图及控制资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438032658434', '200601003', '大渡河黄金坪水电站坝区1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438066212865', '200601004', '大渡河猴子岩水电站坝区1∶1000地形图（0－69）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438108155905', '200601005', '通口河漩坪水电站下坝址1∶2000地形地类图及横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438141710337', '200601006', '西藏雅鲁藏布江藏木水电站枢纽区1∶2000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438175264770', '200601007', '雅砻江官地水电站大盐池马鞍山营地1∶200地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438208819201', '200601008', '大渡河金川水电站库区及枢纽工程占地区地形地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438242373634', '200601009', '美姑河牛牛坝水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438275928065', '200601010', '美姑河牛牛坝水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438309482498', '200601011', '大渡河瀑布沟水电站永定桥', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438343036930', '200601012', '雅砻江牙根水电站施工区1∶5000地形图（补测）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438376591361', '200601013', '雅砻江牙根水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438410145794', '200601014', '雅砻江牙根水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438443700226', '200601015', '三打古河二道桥水电站热水沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438477254658', '200601016', '美姑河牛牛坝水电站连渣洛河纵/横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438510809089', '200601017', '宝兴河跷蹊水电站斑鸠沟/革梁沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438548557825', '200601018', '雅砻江两河口水电站营地1∶200地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438582112257', '200601019', '大渡河大岗山水电站施工控制网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438615666689', '200601020', '火溪河阴平水电站施工控制网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438653415426', '200601021', '广西红水河龙滩水电站施控网2006年复测测量成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438686969858', '200601022', '大渡河猴子岩水电站坝址区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438720524289', '200601023', '大渡河双江口水电站库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438754078721', '200601024', '美姑河柳洪水电站库区横断面图及成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438787633154', '200601025', '大渡河瀑布沟水电站雅砻江官地水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438821187586', '200601026', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438854742018', '200601027', '大瑞线澜沧江1、2号特大桥工点地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438888296449', '200601028', '通口河漩坪水电站集镇新址供水工程引水线路1∶1000地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438921850881', '200601029', '锦屏一级水电站干海子泥石流调查1∶10000放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438947016705', '200601030', '白溪、漳腊、松潘县、黄胆关1∶50000地图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881438984765442', '200601031', '阿坝铝厂变形监测第五期观测成果（2005－9）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439014125569', '200601032', '大渡河大岗山水电站泸定', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439047680002', '200601033', '白水江黑河水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439081234433', '200601034', '白水江青龙水电站场地（ABCDEN)地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439114788865', '200601035', '大渡河泸定水电站咱里沟引水渠', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439152537602', '200601036', '宝兴河跷蹊水电站卡卡瓦集镇污水处理站1∶200地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439186092034', '200601037', '大渡河长河坝水电站章古河坝1∶1000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439219646465', '200601038', '大渡河黄金坪水电站章古河坝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439257395202', '200601039', '双江口水电站施控网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439290949633', '200601040', '大渡河大岗山水电站；大渡河瀑布沟水电站；大渡河金川水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439324504065', '200601041', '大渡河黄金坪水电站牛棚子河坝/耙丫', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439358058497', '200601042', '舍联章古黄金坪', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439395807233', '200601043', '大渡河黄金坪水电站牛棚子/耙丫/长河坝水电站章古河坝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439429361666', '200601044', '大渡河瀑布沟水电站卡尔沟/加里俄呷料场1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439467110402', '200601045', '西藏藏木水电站西藏加查水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439504859137', '200601046', '大渡河大岗山水电站坝区/泄洪洞进水口1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439542607874', '200601047', '大渡河长河坝水电站新江咀料场/响水洞1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439576162305', '200602048', '大渡河黄金坪水电站坝区1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439609716738', '200602049', '大渡河黄金坪水电站坝区1∶1000地形图（补测）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439643271169', '200602050', '泸定水电站建设征地实物调查（2006年2－5月全部资料）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439681019906', '200602051', '大渡河泸定水电站甘露寺/大坪/挖角坪移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439714574337', '200602052', '雅砻江官地水电站施工区横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439748128769', '200602053', '白水江黑河塘水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439781683202', '200602054', '白水江陵江水电站白水江青龙水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439815237634', '200602055', '白水江永乐水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439848792065', '200602056', '白水江永乐水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439886540801', '200602057', '漩坪水电站集镇新址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439924289538', '200602058', '大渡河猴子岩水电站库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439957843970', '200602059', '雅砻江官地水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881439991398402', '200602060', '涪江上游铁笼堡水电站枢纽区1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440024952833', '200602061', '铁笼堡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440058507266', '200602062', '革什扎河磨子沟/两河口库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440096256002', '200602063', '雅砻江中游规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440129810434', '200602064', '丽香线金沙江特大桥资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440163364866', '200602065', '金沙江上游规划横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440196919297', '200602066', '金沙江上游规划地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440234668034', '200602067', '金沙江上游规划保护区河风景区特征点坐标/经纬度成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440268222465', '200602068', '关口资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440301776897', '200602069', '关口水库资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440339525634', '200602070', '杂谷脑河狮子坪水电站渣场地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440373080065', '200602071', '流沙河河道整治1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440406634497', '200602072', '黑水河毛尔盖水电站1－9号渣场1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440456966145', '200602073', '金川业主营地1∶200地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440494714882', '200602074', '通口河漩坪水电站漩坪集镇新址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440528269313', '200602075', '大渡河大岗山库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440561823746', '200602076', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440595378177', '200602077', '白水江规划及控制资料等', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440628932609', '200603078', '通口河漩坪水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440662487042', '200603079', '通口河漩坪水电站马岭岩堆积体地形图及横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440696041474', '200603080', '西藏羊湖二厂厂址/进水口1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440733790209', '200603081', '西藏羊湖二厂厂址引水线路1∶5000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440767344641', '200603082', '杂谷脑河狮子坪水电站纵断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440805093378', '200603083', '雅砻江两河口水电站承包商营地1∶200地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440838647809', '200603084', '雅砻江两河口水电站湾地沟1∶1000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440872202242', '200603085', '雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440905756673', '200603086', '雅砻江两河口水电站可乐沟引水工程1∶1000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440939311105', '200603087', '雅砻江两河口水电站庆大沟支沟渣场1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440972865537', '200603088', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881440993837057', '200603089', '岷江十里铺水电站尾水－吉鱼坝址河道纵断面图（改过）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441014808578', '200603090', '金沙江苏洼龙坝址1∶2000地形图（扩测）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441031585794', '200603091', '金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441044168706', '200603092', '金沙江溪洛渡水电站巧家县移民安置区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441060945921', '200603093', '金沙江溪洛渡水电站水库土地调查', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441077723138', '200603094', '吉牛、二瓦槽施工控制网（2006年报业主）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441094500353', '200603095', '金川水电站导线成果及控制成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441111277570', '200603096', '锦屏一级水电站施工区生活垃圾焚烧场1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441132249090', '200603097', '大渡河瀑布沟水电站流沙河河道整治', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441149026306', '200603098', '木里河卡基娃水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441165803521', '200603099', '黑水河毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441182580737', '200603100', '通口河漩坪水电站禹里集镇新址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441199357953', '200603101', '通口河漩坪水电站漩坪集镇新址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441216135170', '200603102', '大渡河双江口水电站阿斯布隧洞口1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441232912385', '200603103', '大渡河双江口水电站交通工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441245495297', '200603104', '雅砻江锦屏水电站盐原县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441262272514', '200603105', '雅砻江官地水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441274855426', '200603106', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441291632642', '200603107', '大渡河猴子岩水电站坝址区1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441308409858', '200603108', '金沙江岗托水电站坝区1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441325187074', '200603109', '塔吉克斯坦奥布尔东电站枢纽区1∶10000放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441341964289', '200603110', '杂谷脑河古城水电站通化沟沙板岩料场1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441362935809', '200603111', '大渡河瀑布沟水电站卡尔沟/加里俄呷料场横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441379713026', '200603112', '大渡河双江口水电站绰斯甲桥1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441396490242', '200603113', '金沙江上游水电规划雅通坝址1∶2000放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441413267458', '200603114', '泸定水电站军事用地复建', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441430044674', '200603115', '大渡河瀑布沟水电站青岗坪滑坡1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441446821890', '200603116', '大渡河双江口水电站根扎大桥1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441463599105', '200603117', '大渡河猴子岩水电站生活区1∶500地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441480376321', '200603118', '大渡河猴子岩水电站坝址区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441501347841', '200603119', '永定桥下坝址库区1∶5000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441518125057', '200603120', '漩坪电站集镇新址控制测量成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441534902274', '200604121', '西藏羊湖第三期资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441551679489', '200604122', '白水江（多诺水电站坝区/青龙水电站交通桥1∶500地形图）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441581039618', '200604123', '大渡河瀑布沟水电站枢纽区1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441602011137', '200604124', '涪江上游铁笼堡水电站枢纽区1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441618788353', '200604125', '大渡河猴子岩水电站折洛1∶500地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441635565570', '200604126', '大渡河猴子岩水电站坝址区1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441652342785', '200604127', '大渡河黄金坪水电站库区1480米以下地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441664925698', '200604128', '哈萨克斯坦莫伊纳克水电站1∶5000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441681702914', '200604129', '岷江上游中段规划1∶10000纵断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441702674434', '200604130', '金沙江溪洛渡水电站坝区复测1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441736228866', '200604131', '大渡河龙头石水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441765588993', '200604132', '雅砻江两河口水电站公路1、2区1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441790754817', '200604133', '白水江陵江水电站引水线路1∶5000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441807532033', '200604134', '白水江永乐水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441824309249', '200604135', '金沙江上游规划叶巴滩上、下坝址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441845280769', '200604136', '大岗山水电站挖角乡挖角乡集镇居民小区1∶500地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441866252290', '200604137', '雅砻江锦屏一级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441904001026', '200604138', '黑水河毛尔盖水电站库区松黑县道改线公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441937555458', '200604139', '龙滩监测网/变形监测网复核', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441962721281', '200604140', '雅鲁藏布江中下游河段沿河1∶10000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881441987887105', '200604141', '大渡河猴子岩水电站折洛沟1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442017247234', '200604142', '黑水河色尔古水电站右坝址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442038218753', '200604143', '老挝水电站放大地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442063384577', '200604144', '雅鲁藏布江藏木水电站库区/坝区断面图及', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442084356098', '200604145', '毛尔盖坝址区平面地质图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442105327617', '200604146', '木里河卡基娃水电站坝址区1∶1000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442122104833', '200605147', '大渡河老鹰岩水电站坝址区1∶2000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442143076354', '200605148', '紫坪铺水电站阿坝铝厂变形监测首期资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442168242177', '200605149', '紫坪铺水电站阿坝铝厂变形监测第五期资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442201796610', '200605150', '紫坪铺水电站阿坝铝厂变形监测第二期资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442231156738', '200605151', '双江口水电站公路施控网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442256322562', '200605152', '南桠河栗子坪施控网2006年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442273099778', '200605153', '大渡河瀑布沟水电站耳足移民址1∶2000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442294071297', '200605154', '大渡河瀑布沟水电站耳足移民址1∶500地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442323431425', '200605155', '雅砻江两河口水电站库区（雅砻江段/鲜水河段/庆大沟段）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442344402946', '200605156', '雅砻江锦屏一级水电站大沱生活区（营地）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442361180162', '200605157', '大渡河黄金坪水电站章古河坝羊厂沟引水工程1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442382151681', '200605158', '大渡河安顺、老鹰岩水电站坝区1∶2000地形地类图及控制', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442403123202', '200605159', '大渡河黄金坪水电站坝区1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442424094721', '200605160', '金沙江溪洛渡水电站成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442440871938', '200605161', '通口河漩坪水电站坝区苦竹坝1∶2000放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442461843458', '200605162', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442478620674', '200605163', '大渡河大岗山水电站挖角渣场1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442499592193', '200605164', '瓦斯河龙洞水电站库区、闸区、引水隧洞区地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442520563713', '200605165', '雅砻江孟底沟/张牙沟带状放大1∶10000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442541535233', '200605166', '大渡河瀑布沟水电站流沙河河道整治1∶5000放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442562506754', '200605167', '塔吉克斯坦亚湾水电站1∶10000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442587672577', '200605168', '紫坪铺水电站阿坝铝厂变形监测第三期资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442612838402', '200605169', '大渡河安顺、老鹰岩水电站库区1∶5000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442638004225', '200605170', '金沙江上游波罗水电站下坝址1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442658975746', '200605171', '金沙江上游岗托水电站上、下坝址1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442675752962', '200605172', '大渡河猴子岩水电站上坝址（左岸补测）1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442688335874', '200605173', '木里河卡基娃水电站业主营地1∶500地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442705113090', '200605174', '紫坪铺水电站施工控制网资料（报业主）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442730278914', '200605175', '涪江铁笼堡水电站蜈蚣口/北山坪1∶1000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442751250433', '200605176', '雅砻江两河口水电站志里村/西地村土料场1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442772221954', '200605177', '西藏羊湖二厂', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442797387777', '200605178', '雅砻江上游水电规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442830942210', '200605179', '雅砻江两河口水电站油库、炸药库1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442864496642', '200605180', '通口河漩坪水电站瓦厂村料场1∶1000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442902245377', '200605181', '金沙江水电规划苏洼龙水电站坝址区1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442931605506', '200605182', '毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442956771330', '200605183', '金沙江王大龙水电站坝址1∶2000放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442973548545', '200605184', '毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881442990325762', '200605185', '四川省雅砻江两河口水电站公路施工控制网一、二期资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443007102977', '200605186', '白水江永乐水电站引水线路（左岸扩测）1∶5000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443023880193', '200605187', '黑水河毛尔盖水电站知木林乡苗圃1∶1000放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443036463106', '200605188', '金沙江上游岗托水电站上、下坝址1∶2000地形图（补测）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443053240321', '200605189', '金沙江溪洛渡水电站永善县务基乡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443070017537', '200605190', '毛尔盖水电站木渎河坝1∶1000放大地形图（范围增加）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443086794754', '200605191', '大渡河猴子岩水电站色郎沟—寸进村1∶5000放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443103571970', '200605192', '毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443120349185', '200605193', '雅砻江上游水电规划河段纵断面测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443137126402', '200605194', '大渡河猴子岩水电站上坝址1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443153903617', '200605195', '宝兴河出局沟水电站渣场1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443166486529', '200605196', '黑水河毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443179069441', '200605197', '黑水河毛尔盖水电站色多河坝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443191652353', '200605198', '柳洪滑坡1∶500DEM', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443204235265', '200605199', '金沙江溪洛渡水电站坝区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443221012482', '200605200', '大渡河深溪沟水电站施工控制网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443237789697', '200605201', '黑水河毛尔盖水电站色多河坝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443254566914', '200605202', '大渡河猴子岩水电站坝址区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443271344129', '200605203', '石棉安顺老鹰岩控制资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443288121345', '200605204', '黑水河毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443304898562', '200605205', '塔吉克斯坦亚湾水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443325870081', '200605206', '大渡河泸定水电站泸定城区1∶2000河段地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443342647298', '200605207', '雅砻江牙根水电站库区横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443359424514', '200605208', '无量河水电规划资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443376201729', '200605209', '金沙江上游水电规划呷丁坝址区1∶5000放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443392978945', '200605210', '雅砻江上游水电规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443409756162', '200605211', '大渡河革什扎河吉牛水电站渣场地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443422339074', '200605212', '金沙江昌波水电站上坝址至厂址引水线路1∶5000放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443439116289', '200701001', '黑水河毛尔盖水电站移民安置区及引水工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443451699201', '200701002', '塔吉克斯坦亚湾水电站库区调查表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443464282114', '200701003', '湾地沟/可乐沟导线成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443476865026', '200701004', '大渡河大岗山水电站挖角桃坝渣场地形图1∶500及控制资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443489447938', '200701005', '美姑河柳洪水电站滑坡500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443506225153', '200701006', '坪头施控网2006年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443523002369', '200701007', '金沙江溪洛渡水电站永善县务基乡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443539779585', '200701008', '长河坝放大图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443552362498', '200701009', '大渡河长河坝水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443564945410', '200701010', '大渡河泸定水电站移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443581722625', '200701011', '金沙江上游波罗水电站上下坝址地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443598499841', '200701012', '金沙江上游规划成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443611082754', '200701013', '紫坪铺水库区阿坝州铝厂场地变形监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443627859970', '200701014', '大渡河干流（足木足河）卜寺沟水电站坝址区地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443661414402', '200701015', '大渡河长河坝水电站泸定水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443694968833', '200701016', '金沙江上游叶巴滩水电站库区地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443728523266', '200701017', '金沙江昌波水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443762077698', '200701018', '大渡河双江口水电站坝区地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443791437826', '200701019', '大渡河泸定水电站四湾', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443824992257', '200701020', '西藏羊湖抽水蓄能电站二厂', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443858546690', '200701021', '金沙江上游波罗水电站上下坝址地形图（补测）1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443892101122', '200701022', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443917266945', '200701023', '雅砻江上游规划各水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443942432769', '200701024', '瀑布沟甘洛县耳足新的新移民安置点（耳足二期）地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443963404290', '200701025', '大渡河泸定水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443980181505', '200701026', '古城水电站厂房后坡监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881443996958721', '200701027', '瀑布沟水电站桂贤乡中心村移民安置点地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444009541634', '200701028', '大渡河双江口水电站孔龙村移民址地形地类图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444026318849', '200701029', '长河坝施工控制网2005年(报业主)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444043096066', '200701030', '雅砻江上游水电规划温波水电站库区补充放大图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444055678978', '200701031', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444068261890', '200701032', '金沙江溪洛渡水电站巧家县老街子/太平移民安置区地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444080844801', '200701033', '无量河水电规划的GPS五等导线成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444097622018', '200701034', '雅砻江两河口水电站公路测量控制成果 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444118593537', '200701035', '大渡河瀑布沟水电站白马移民安置区引水渠地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444147953665', '200701036', '西藏羊湖抽水蓄能电站二厂', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444181508098', '200701037', '大渡河泸定水电站田坝引水工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444215062529', '200701038', '大渡河泸定水电站大坝至挖角引水工程地形地类图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444248616961', '200701039', '西藏羊湖抽水蓄能电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444282171394', '200701040', '雅砻江官地水电站业主营地打倮水源地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444311531522', '200701041', '大渡河大岗山水电站库区湾东大桥/磨西桥地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444340891649', '200701042', '黑水河毛尔盖水电站红岩乡填方地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444366057473', '200701043', '广西红水河龙滩水电站施控网(2007年复测)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444391223298', '200701044', '柳洪首期监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444416389121', '200701045', '大渡河双江口水电站墨尔基移民址地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444441554945', '200701046', '大渡河泸定水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444466720770', '200701047', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444491886593', '200701048', '瀑布沟水电站两河口河道整治、崖勒沟料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444525441025', '200701049', '黑水河毛尔盖水电站库周交通公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444571578369', '200701050', '大渡河泸定水电站伞岗坪引水工程地形地类图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444605132802', '200701051', '瀑布沟水电站加里俄呷、卡尔沟料场地形及横断面测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444642881537', '200701052', '大渡河硬梁包水电站厂址/闸址地形地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444680630273', '200701053', '金沙江奔子栏梯级水电站阿洛共坝址坐标', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444718379009', '200701054', '雅砻江楞古/孟底沟水电站坝址区外围1∶25000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444751933441', '200701055', '瀑布沟库区石棉矿尾矿地形与断面测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444785487874', '200701056', '泸定水电站移民安置点引水工程及交通公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444819042306', '200701057', '田湾河2006复测(成勘院)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444856791041', '200701058', '雅砻江楞古水电站库区地形图5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444886151169', '200701059', ' 泸定县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444919705602', '200701060', '四川瓦斯河龙洞水电站红岩窝沟放大地形图5万', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444953260034', '200701061', '美姑河柳洪水电站厂区滑坡地形图测绘2006-151', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881444986814465', '200701062', '瀑布沟水电站水处理场地形图测绘2006-036', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445024563202', '200701063', '安宁河洼脑水电站1∶2000地形图及闸首1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445053923329', '200701064', '大渡河大岗山水电站得妥吊桥纵横断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445087477761', '200701065', '黑水河毛尔盖水电站日布/色多河坝/木渎河坝移民安置区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445121032193', '200701066', '东河西昌城市供水地形图正式图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445154586626', '200701067', '雅砻江上游河段各梯级电站坝址坐标经纬度', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445188141058', '200701068', '大渡河瀑布沟汉源富泉地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445221695490', '200701069', '大渡河瀑布沟水电站控制成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445255249921', '200701070', '雅砻江温波水电站库区地形图10000（三维改二维）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445292998658', '200702071', '大渡河大岗山水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445326553090', '200702072', '大渡河双江口水电站石广东集镇新址地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445360107522', '200702073', '长河坝水电站移民安置点地形地类测绘NO2007-013', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445393661953', '200702074', '硬梁包水电站闸厂址地形地类图测绘NO2006-133', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445427216385', '200702075', '黑水河毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445460770818', '200702076', '四川瓦斯河龙洞水电站红岩窝沟放大地形图5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445494325249', '200702077', '大渡河泸定水电站海子村土料场地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445527879681', '200702078', '大渡河双江口水电站木尔宗土料场地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445561434113', '200702079', '大渡河泸定水电站五里沟对外交通公路地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445594988545', '200702080', '黑水河毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445628542977', '200702081', '西藏断面巴玉/达古/加查/街需/冷达/索朗嘎姑断面成果/妥峡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445662097409', '200702082', '大渡河达维水电站上下坝址区地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445699846145', '200702083', '大渡河大岗山水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445729206274', '200702084', '大渡河大岗山水电站得妥乡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445762760706', '200702085', '大岗山水电站<磨西河大桥/湾东大桥/得妥大桥>地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445800509441', '200702086', '黑水河毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445834063873', '200702087', '大渡河瀑布沟水电站三星生产开发区地形地类图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445863424001', '200702088', '大渡河双江口电站孔龙集镇新址地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445896978433', '200702089', '卡基娃水电站水库淹没影响区界桩测设资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445930532865', '200702090', '大渡河双江口水电站库周地形图梭磨河左岸/绰斯甲河2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445964087298', '200702091', '大渡河大岗山水电站库区磨西沟移民点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881445997641729', '200702092', '大渡河双江口水电站观音桥移民安置点地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446031196161', '200702093', '雅砻江中游改算成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446064750593', '200702094', '金沙江苏洼龙水电站坝址区地形图10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446098305025', '200702095', '木里河卡基娃水电站库区地形地类图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446131859457', '200702096', '溪洛渡巧家县控制成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446165413890', '200702097', '白水江黑河塘水电站磨房沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446198968321', '200702098', '大渡河泸定水电站海子施工道路地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446232522753', '200702099', '大渡河大岗山水电站库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446266077186', '200702100', '大渡河足木足河卜寺沟水电站坝址区地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446299631617', '200702101', '金沙江岗托水电站施工场地地形地类图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446337380354', '200702102', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446370934786', '200702103', '大渡河干流（足木足河）卜寺沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446404489218', '200702104', '大渡河干流（足木足河）卜寺沟水电站库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446442237953', '200702105', '大渡河猴子岩水电站施工测量控制网布置图及技术设计书', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446475792386', '200702106', '大渡河大岗山水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446509346817', '200702107', '白水江多诺水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446547095554', '200702108', '长江梯级数字化图（江安/石棚/新路口）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446580649986', '200702109', '大渡河革什扎河吉牛水电站4号/5号渣场地形图及控制成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446618398722', '200702110', '西藏上.下线断面资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446651953154', '200702111', '大渡河黄金坪水电站二台子移民安置点地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446685507585', '200702112', '  木尔基移民安置点及引水工', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446719062018', '200702113', '大渡河双江口水电站库周地形图梭磨河右岸2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446752616449', '200702114', '白水江黑河塘、多诺水电站革什扎河吉牛水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446786170882', '200702115', '雅鲁藏布江藏木水电站料场地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446823919617', '200702116', '雅鲁藏布江街需水电站坝区地形图2000新(扩测）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446861668353', '200702117', '大渡河大岗山水电站湾东电站道路地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446895222786', '200702118', '双江口水电站木尔宗土料场地形地类图测绘NO2007-025', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446932971522', '200702119', '大渡河双江口水电站坝下河道地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881446966525953', '200702120', '紫坪铺水电站阿坝铝厂监测资料（新五期）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447000080385', '200702121', '黑水河毛尔盖水电站色尔古集中安置区地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447037829122', '200702122', '白水江多诺水电站二道桥施工场地地形地类图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447075577858', '200702123', '白水江黑河水电站绕纳村引水遂洞地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447109132290', '200702124', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447142686721', '200702125', '毛尔盖移民区地形地类图补充测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447176241153', '200702126', '大渡河大岗山水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447209795586', '200702127', '金沙江波罗、藏曲、偶曲、增曲断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447243350018', '200702128', '雅砻江楞古水电站厂址区地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447276904450', '200702129', '白水江永乐水电站厂址区地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447310458882', '200702130', '白水江永乐水电站调节池地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447344013314', '200702131', '足木足河地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447377567745', '200702132', '雅砻江上游3个坝址图2007年05月补测(木罗、木乃、新龙）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447411122178', '200702133', '大渡河猴子岩水电站孔玉乡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447444676609', '200703134', '大渡河猴子岩水电站丹巴白呷依村', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447478231042', '200703135', '柳洪压力管道山体稳定性监测长江宜宾至合江段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447511785474', '200703136', '西昌市东河水库坝址区地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447541145602', '200703137', '柳洪压力管道山体稳定性监测第3期资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447574700034', '200703138', '大渡河猴子岩水电站格宗乡移民安置点地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447608254465', '200703139', '西昌东河纵横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447641808898', '200703140', '大渡河猴子岩水电站格宗乡引水工程地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447679557633', '200703141', '长江宜宾－合江段河道平面图及纵横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447713112066', '200703142', '沙湾施控网；卡基娃施控网（2007年复测）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447750860802', '200703143', '金沙江昌波水电站(库区地形图10000/厂址区地形图2000)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447784415233', '200703144', '坪头施控网资料2007', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447817969666', '200703145', '西藏雅鲁藏布江藏木水电站施工区地形地类图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447855718402', '200703146', '瓦斯沟龙洞水电站工程区放大地形图5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447893467137', '200703147', '金沙江岗托/波罗水电站1∶10000地形图成果资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447927021569', '200703148', '大渡河瀑布沟水电站黑马沟鱼类增殖站地形图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447960576001', '200703149', '大渡河大岗山水电站库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881447994130433', '200703150', '长江宜宾—合江段水利资源利用研究地形图10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448027684865', '200703151', '深溪沟水电站界桩上交资料(业主)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448065433602', '200703152', '无量河确如多厂址1∶5000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448098988034', '200703153', '青龙水电站施工测量控制网2007年度复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448132542465', '200703154', '大渡河干流足木足河卜寺沟水电站库区草登乡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448174485506', '200703155', '大渡河猴子岩水电站白呷依村引水工程地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448212234241', '200703156', '岷江干流（鸳鸯桥—太平河段）水电规划地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448245788673', '200703157', '雅砻江楞古水电站坝址区地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448279343105', '200703158', '长江宜宾至合江段放大地形图2000(4个梯级）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448312897538', '200703159', '深溪沟水电站建设征地界桩测绘资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448346451969', '200703160', '大渡河黄金坪水电站厂区地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448380006401', '200703161', '岷江干流（鸳鸯桥～太平河段）水电规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448413560834', '200703162', ' 大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448447115266', '200703163', '大渡河猴子岩水电站小金日尔河坝安置点及生产用地地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448480669698', '200703164', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448514224130', '200703165', '大渡河瀑布沟水电站（尼日河）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448551972865', '200703166', '达维、巴拉库区放大图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448585527297', '200703167', '雅砻江孟底沟水电站施工场地坝址区地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448619081729', '200703168', '西藏雅鲁藏布江中游规划测绘资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448656830465', '200703169', '叶巴滩水电站横断面测绘NO2007-018', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448690384897', '200703170', '关于坪头水电站施工测量控制网(2007年复测)的审查意见的复函', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448719745026', '200703171', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448757493762', '200703172', '金沙江上游波罗水电站Y508K27珈玛祖、德弄沟土料场地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448791048194', '200703173', '岗托水电站库区测绘资料NO2007-019', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448820408322', '200703174', '雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448853962753', '200703175', '大渡河支流绰斯甲河绰斯甲水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448887517185', '200703176', '岷江太平水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448921071617', '200703177', '西藏雅鲁藏布江里龙水电站坝区放大地形图5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448954626050', '200703178', '双江口水电站坝区/绰斯甲水电站闸厂区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881448988180482', '200703179', '大渡河双江口水电站白赊村移民安置点地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449021734914', '200703180', '大渡河猴子岩水电站日尔河坝移民安置点引水渠地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449055289346', '200704181', '金沙江波罗库区地形地类图2000及控制成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449088843778', '200704182', '金沙江上游岗托水电站库区2000地形地类图及控制成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449122398210', '200704183', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449155952641', '200704184', '巴拉（上坝址/下坝址/厂址）及达维上坝址地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449189507073', '200704185', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449223061505', '200704186', '西藏羊湖抽水蓄能水电站二厂进水口地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449256615937', '200704187', '西昌市东河水库坝址区地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449290170370', '200704188', '大渡河双江口电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449319530497', '200704189', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449369862146', '200704190', '西藏羊湖抽水蓄能水电站水下地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449403416578', '200704191', '羊湖二厂测绘资料/雅鲁藏布江中游水电规划测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449432776706', '200704192', '金沙江上游岗托水电站血嘎土料场地形地类2000及控制', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449466331137', '200704193', '大渡河黄金坪水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449499885569', '200704194', '涪江中坝河段综合治理规划5000放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449533440002', '200704195', '大渡河支流绰斯甲河绰斯甲水电站厂闸址地形图1000及控制', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449558605826', '200704196', '紫坪铺阿坝铝厂(新6期观测）监测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449583771649', '200704197', '大渡河双江口水电站斯米地村移民安置点地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449604743170', '200704198', '金沙江上游岗托水电站料场地形地类图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449629908993', '200704199', '大渡河泸定水电站潘沟移民规划地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449659269121', '200704200', '西藏雅鲁藏布江江木拉水电站坝区放大地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449684434946', '200704201', '涪江中坝河段综合治理规划1∶2000地形图(500缩小的）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449705406466', '200704202', '大渡河猴子岩水电站白呷依村', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449734766593', '200704203', '大渡河双江口水电站因戈落村', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449759932417', '200704204', '大渡河泸定水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449785098242', '200704205', '大渡河双江口水电站木尔多、斯鸟及斯米地村', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449810264065', '200704206', '白水江多诺水电站厂房地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449839624193', '200704207', '大渡河瀑布沟水电站万工乡引水工程引水线路地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449864790017', '200704208', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449894150145', '200704209', '波罗水电站料场及库区测绘资料NO2007-027、039', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449919315969', '200704210', '雅砻江孟底沟水电站库区地形图5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449940287490', '200704211', '通口河邓家水电站(引水线路2000/闸区1000)地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449969647618', '200704212', '大渡河泸定水电站泸定县泸桥镇咱里村二组地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881449994813442', '200704213', '大渡河大岗山水电站泸定县杵坭乡瓦斯营盘公路地形地类图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450019979265', '200704214', '卡基娃水电站施工区界桩测绘资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450045145090', '200704215', '长江宜宾至合江段放大地形图2000(江安/榕山/石棚/新路口)梯级', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450074505217', '200704216', '大渡河绰斯甲水电站工程区地形图5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450108059650', '200704217', '大渡河瀑布沟水电站黑马沟鱼类增殖站地形图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450141614082', '200704218', '羊湖抽水蓄能电站二厂下线进水口地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450175168513', '200704219', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450208722945', '200704220', '哈萨克斯坦玛依纳水电站地形图数字化', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450242277377', '200704221', '金沙江溪洛渡水电站湾河水利工程上下坝址1∶2000地形地类图及控制', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450275831810', '200704222', '两河口施控制网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450317774850', '200704223', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450355523586', '200704224', '金沙江下游1∶10000地形图测图成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450380689409', '200704225', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450401660930', '200705226', '大渡河大岗山水电站泸定县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450422632450', '200705227', '通口河漩坪水电站大坝下游至曹山沟料场地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450439409665', '200705228', '通口河漩坪水电站槽山沟料场A区B区C区料场编绘地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450456186882', '200705229', '白水江多诺水电站坝区、料场地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450472964098', '200705230', '大岗山施控网2007年度复测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450485547010', '200705231', '柳洪压力管道山体第5期监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450506518530', '200705232', '美姑河牛牛坝水电站(库区-厂区)地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450540072962', '200705233', '涪江中坝河段治理规划1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450573627393', '200705234', '雅砻江楞古水电站力邱河地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450611376130', '200705235', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450644930561', '200705236', '雅砻江两河口水电站坝区地形图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450674290690', '200705237', '大渡河瀑布沟水电站万工乡公路地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450707845121', '200705238', '大渡河双江口水电站因戈落红房子安置点地形地类500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450745593857', '200705239', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450779148289', '200705240', '沙溪施控网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450812702721', '200705241', '大渡河双江口水电站因戈落红房子移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450846257153', '200705242', '绰斯甲水电站工程区1∶5000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450879811586', '200705243', '金沙江上游岗托水电站库区面积量算成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450917560322', '200705244', '涪江中坝段河道纵横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450951114753', '200705245', '雅砻江两河口水电站坝区地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881450988863490', '200705246', '大渡河瀑布沟水电站九襄镇甘溪坝移民安置点地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451022417921', '200705247', '金沙江苏洼龙水电站库区地形图10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451055972354', '200705248', '大渡河双江口水电站业隆村', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451093721090', '200705249', '雅砻江楞古水电站宋玉沟地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451127275521', '200705250', '美姑河坪头水电站柳洪沟1000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451165024257', '200705251', '大渡河瀑布沟水电站万工乡引水工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451198578689', '200705252', '永乐水电站引水隧洞等测绘资料NO2007-053', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451236327425', '200705253', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451269881858', '200705254', '猴子岩水电站移民安置等测绘资料NO2007-049', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451303436290', '200705255', '大渡河绰斯甲水电站料场、渣场地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451341185025', '200705256', '岷江十里铺水电站出机山土料场、十里沟石料场和坝址区扩测地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451374739457', '200705257', '雅砻江两河口水电站干、支流库区坐标转换成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451408293889', '200705258', '金沙江拉哇水电站库区1∶10000地形图最终数据', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451441848321', '200705259', '大渡河双江口水电站飞水岩山体局部放大图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451483791361', '200705260', '涪江最终图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451517345794', '200705261', '涪江中坝河段综合治理规划测绘NO2007-070', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451550900226', '200705262', '岷江十里铺水电站出机山土料场、十里沟石料场和坝址区扩测地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451588648961', '200705263', '达维水电站/下尔呷水电站/巴拉水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451622203394', '200705264', '雅砻江两河口水电站(白孜村/脚泥堡/呷拉乡)土料场地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451655757826', '200705265', '白水江多诺水电站美姑河坪头水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451689312258', '200705266', '大渡河泸定水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451722866689', '200705267', '西藏雅鲁藏布江坝区放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451756421121', '200705268', '多诺施控网2007年度复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451777392641', '200705269', '雅砻江上游(乐安水电站上坝址区/仁青岭水电站坝址区)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451798364162', '200705270', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451819335682', '200705271', '大渡河猴子岩水电站格宗乡移民安置点引水线路地形地类图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451831918594', '200705272', '大渡河双江口水电站年克村生产用地,引水地形地类图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451848695809', '200705273', '大渡河支流绰斯甲河绰斯甲水电站(厂址/闸址)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451865473026', '200705274', '金沙江上游苏洼龙水电站库区10000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451882250242', '200705275', '湾河水库地形测绘资料NO2007-065', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451899027457', '200706276', '西藏雅鲁藏布江藏木水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451911610370', '200706277', '雅砻江两河口水电站坝区地形图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451928387586', '200706278', '大渡河猴子岩水电站色朗沟块石料场地形图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451945164802', '200706279', '西藏断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451961942018', '200706280', '西藏雅鲁藏布江藏木水电站7 号公路地形图1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451974524929', '200706281', '大渡河瀑布沟水电站大田乡移民安置区地形地类图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451987107842', '200706282', '坪头柳洪沟GPS成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881451999690754', '200706283', '雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452016467970', '200706284', '大渡河大岗山水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452050022401', '200706285', '埃塞俄比亚地形图1∶50000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452083576833', '200706286', '羊湖二厂抽水蓄能水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452117131265', '200706287', '大渡河猴子岩水电站坝址区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452150685698', '200706288', '黄金坪施控制网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452184240130', '200706289', '雅砻江牙根水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452217794561', '200706290', '美姑河牛牛坝水电站坝址-厂址沿河地形地类图及测量控制点成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452251348994', '200706291', '美姑河坪头水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452284903426', '200706292', '金沙江叶巴滩水电站横断面1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452318457857', '200706293', '南桠河冶勒水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452352012290', '200706294', '金沙江上游波罗水电站库区1000横断面图的导线成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452385566722', '200706295', '猴子岩施控网首次施测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452419121153', '200706296', '双江口施控制网2007年度复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452456869889', '200706297', '大渡河长河坝水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452490424321', '200706298', '成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452528173058', '200706299', '大渡河双江口电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452557533186', '200706300', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452586893314', '200706301', '大渡河泸定水电站下田坝交通桥1∶1000横断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452612059138', '200706302', '长河坝水电站施控网2007年度复测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452637224962', '200706303', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452662390785', '200706304', '大渡河长河坝水电站施工区业主营地与金康大桥地形图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452687556609', '200706305', '大渡河支流绰斯甲河绰斯甲水电站厂区/闸区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452712722434', '200706306', '西藏雅鲁藏布江藏木水电站古洪水特征点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452737888257', '200706307', '大渡河黄金坪水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452758859777', '200706308', '西藏雅鲁藏布江藏木水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452784025602', '200706309', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452813385729', '200706310', '西藏雅鲁藏布江藏木水电站1、3、5号公路地形图1∶1000及导线成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452838551553', '200706311', '大渡河大岗山水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452863717377', '200706312', '四川省大渡河双江口水电站枢纽区下游河道', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452888883201', '200706313', '四川省宜宾至合江（川渝分界处）段水电开发研究测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452914049026', '200706314', '四川省白水江永乐、黑河水电站测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452939214850', '200706315', '四川省大渡河长河坝水电站野坝、江咀、牛棚子及章古河坝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452964380674', '200706316', '四川省木里河卡基娃水电站施工测量控制网首次测设', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881452989546497', '200706317', '四川省美姑河坪头水电站施工测量控制网2007年度复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453014712322', '200706318', '多诺水电站施工测量控制网2007年度复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453039878145', '200706319', '四川省白水江青龙水电站施工测量控制网2007年度复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453069238274', '200706320', '金沙江溪洛渡水电站湾河水利工程坝址及库区地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453098598402', '200706321', '四川省涪江中坝河段综合治理规划测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453123764225', '200706322', '四川省大渡河大岗山水电站雅安、天全和荥经移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453144735746', '200706323', '四川省雅砻江两河口水电站坝区和料场地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453174095874', '200706324', '雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453199261697', '200706325', '大渡河双江口水电站金川县集沐乡业隆村', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453224427521', '200706326', '大渡河猴子岩水电站日尔河坝移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453249593345', '200706327', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453274759169', '200706328', '四川岷江紫坪铺水利枢纽工程大坝变形监测基准网2007年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453299924994', '200706329', '四川大渡河瀑布沟水电站汉源县富泉地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453341868033', '200706330', '金沙江上游叶巴滩水电站库区横断面测绘工', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453367033857', '200706331', '白水江多诺水电站坝址区、料场、厂区地形图及断面测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453392199682', '200706332', '大渡河（足木足河）达维水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453417365505', '200706333', '雅砻江官地水电站打倮沟水源地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453442531329', '200706334', '金沙江上游波罗水电站库区横断面测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453471891457', '200706335', '白水江黑河水电站引水隧洞过绕纳沟地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453501251585', '200706336', '四川省白水江永乐水电站调节池和下厂址右侧山坡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453530611713', '200706337', '美姑河柳洪压力钢管区滑动及变形边坡监测设计', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453559971841', '200706338', '大渡河硬梁包水电站新增坝址水下地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453585137665', '200706339', '大渡河大岗山水电站移民安置点地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453618692097', '200706340', '大渡河大岗山水电站移民安置点地形地类图补充测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453656440833', '200706341', '西藏自治区羊湖抽水蓄能电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453689995265', '200706342', '西藏自治区羊湖二厂测绘资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453723549697', '200706343', '金沙江上游岗托水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453761298434', '200706344', '大渡河长河坝水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453794852866', '200706345', '金沙江岗托水电站工程区地形图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453828407297', '200706346', '雅砻江锦屏一级水电站垃圾焚烧场地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453866156034', '200706347', '西昌市东河水库坝址区地形图（补测）1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453899710465', '200706348', '通口河邓家水电站闸址区/引水线路地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453937459201', '200706349', '江木拉、里龙放大地形图及藏木料场地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881453971013634', '200706350', '大渡河黄金坪水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454008762370', '200706351', '金沙江上游波罗水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454042316801', '200706352', '西藏自治区羊湖抽水蓄能二厂', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454080065538', '200706353', '西藏自治区雅鲁藏布江藏木水电站施工区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454113619969', '200706354', '大渡河黄金坪水电站厂区地形图和二台子、章古山安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454147174402', '200706355', '大渡河泸定水电站移民安置点、引水线路、取水口地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454176534530', '200801001', '瓦斯河龙洞水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454201700353', '200801002', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454226866178', '200801003', '大渡河瀑布沟水电站大树镇麦坪村', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454256226306', '200801004', '木里河固增水电站人工骨料场地形地类图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454285586433', '200801005', '大渡河长河坝水电站菩提河坝块石料场地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454314946561', '200801006', '大渡河长河坝水电站料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454340112385', '200801007', '金沙江上游叶巴滩水电站（俄德沟和三号沟/降曲施工场地）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454365278209', '200801008', '大渡河绰斯甲水电站渣场及料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454390444033', '200801009', '大渡河足木足河卜寺沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454415609857', '200801010', '大渡河足木足河卜寺沟水电站坝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454440775681', '200801011', '雅砻江孟底沟水电站库区工程区及坝址区外围地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454470135809', '200801012', '金沙江溪洛渡水电站库区永久界桩测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454499495938', '200801013', '大渡河（足木足河）巴拉水电站厂址/达维水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454524661762', '200801014', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454554021890', '200801015', '大渡河龙头石水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454574993409', '200801016', '金沙江上游叶巴滩水电站降曲施工场地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454604353538', '200801017', '西昌东河水库（厂房蓄水池/中坝址）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454625325058', '200801018', '木里河卡基娃水电站库区复建吊桥横断面图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454654685186', '200801009', '金沙江溪洛渡水电站库区永久界桩', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454675656705', '200801026', '雅砻江两河口水电站坝区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454705016834', '200801037', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454734376961', '200801038', '大渡河龙头石水电站库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454759542786', '200801039', '大渡河瓦斯河龙洞水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454788902913', '200801040', '大渡河猴子岩水电站色身小 沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454822457345', '200801041', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454856011778', '200801042', '雅砻江上游规划河段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454889566210', '200801043', '雅砻江上游规划木能达木罗新龙坝址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454923120641', '200801044', '大渡河达维水电站上下坝址区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454960869377', '200801045', '大渡河达维巴拉水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881454994423810', '200801046', '雅砻江楞古水电站库区工程区及坝址区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455027978242', '200801047', '大渡河黄金坪水电站二台子', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455061532674', '200801048', '大渡河绰斯甲水电站闸址厂址引水线路料场支洞渣场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455099281410', '200801049', '雅砻江上游规划河段仁青岭乐安水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455132835842', '200801050', '大渡河黄金坪水电站施工区临时界桩测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455170584577', '200801051', '大渡河长河坝水电站业主营地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455204139009', '200801052', '雅砻江锦屏一级水电站鱼类增殖站场址地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455237693442', '200801053', '白水江九寨沟县城景观拦水坝工程地形地类图 1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455271247874', '200801054', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455304802305', '200801055', '西昌东河水库上坝址地形地类图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455342551041', '200801056', '双江口水电站（本真村县垃圾场/邓家沙场/俄尔雅沙场）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455376105473', '200801057', '大渡河长河坝水电站菩提河坝移民安置点地质灾害地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455409659905', '200801058', '大渡河双江口水电站邓家桥蒙古沟梭磨河河道改道', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455447408642', '200801059', '大渡河瀑布沟水电站（富泉乡大坪头/富林镇鸣鹿村）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455480963074', '200801060', '西昌东河水库坝址区地形图（补测）1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455518711809', '200801061', '大渡河瀑布沟水库地形图1∶10000/大渡河沿河地形图1∶10000（33-37）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455552266241', '200801062', '岷江紫坪铺水利枢纽工程变形监测基准网2007年度复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455590014977', '200801063', '美姑河柳洪水电站覆盖层滑坡监测工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455627763714', '200801064', '黑水河毛尔盖水电站双溜索块石料场地形地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455652929538', '200801065', '雅砻江两河口水电站施工测量控制网局部点位复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455678095361', '200801066', '西藏自治区雅鲁藏布江藏木水电站施工测量控制网首次测设', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455699066881', '200801067', '雅砻江两河口水电站公路隧洞施工测量控制网2007年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455720038402', '200801068', '四川省雅砻江两河口水电站施工测量控制网局部复测报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455741009921', '200801069', '大渡河黄金坪水电站临时界桩测绘工作报告NO2007-106', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455761981441', '200801070', '黑水河毛尔盖水电站双溜索块石料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455782952962', '200801071', '西藏雅鲁藏布江达古水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455808118786', '200801072', '黑水河毛尔盖水电站库周交通公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455824896001', '200801073', '大渡河双江口水电站邓家桥沙场填高造地工程横断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455845867521', '200801074', '雅砻江木里河卡基娃水电站施工区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455866839042', '200801075', '雅砻江牙根水电站坝址区地面变形监测首期观测工作报告NO2007-090', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455887810562', '200801076', '大渡河黄金坪水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455912976385', '200801077', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455933947906', '200801078', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455954919425', '200801079', '西藏雅鲁藏布江藏木水电站枢纽区地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455980085250', '200801080', '大渡河龙头石水电站库区下河坝地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881455996862465', '200802081', '大渡河双江口水电站邓家桥', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456017833985', '200802082', '大渡河黄金坪水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456042999810', '200802083', '大渡河猴子岩水电站小金日尔河坝安置点及生产用地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456059777026', '200802084', '两河口水电站（隧硐/局部）施控网复测交业主资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456080748545', '200802085', '大渡河双江口水电站木尔宗土料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456101720065', '200802086', '雅砻江牙根水电站坝区岩体第3期监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456118497281', '200802087', '大渡河瀑布沟水电站（洪福/建坪）工业园区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456143663105', '200802088', '大渡河双江口水电站木尔宗料场下游放大地形图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456164634626', '200802089', '木里河卡基娃水电站鱼类增殖站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456181411841', '200802090', '大渡河双江口水电站沙市移民安置点地形地类图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456202383362', '200802091', '大渡河猴子岩水电站色古沟放大地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456227549186', '200802092', '大渡河黄金坪水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456248520706', '200802093', '涪江白草河小坝水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456269492225', '200802094', '大渡河黄金坪水电站(舍联三组/叫吉村)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456294658049', '200802095', '大渡河泸定水电站安置点1∶500和1∶2000地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456315629569', '200802096', '黑水河毛尔盖水电站移民安置区1∶500地形地类图补充测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456332406786', '200802097', '大渡河猴子岩水电站移民安置区地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456353378305', '200802098', '大渡河双江口水电站集镇新址占地区及移民集中安置点和生产安置区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456378544130', '200802099', '大渡河瀑布沟水电站石棉县白马', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456399515650', '200802100', '大渡河黄金坪水电站二台子', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456420487169', '200802101', '金沙江上游岗托水电站黄格土料场放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456441458690', '200802102', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456466624513', '200802103', '大渡河黄金坪水电站孟子坝、姑咱、二台子、叫吉村、舍联三组等测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456483401730', '200802104', '大渡河瓦斯沟龙洞水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456504373249', '200802105', '大渡河黄金坪水电站姑咱移民安置点地形地类图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456529539074', '200802106', '大渡河黄金坪水电站二台子移民安置点冷竹关沟取水口地形地类图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456546316289', '200802107', '岷江紫坪铺水利枢纽工程水库区河道横断面测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456567287810', '200802108', '金沙江上游岗托水电站申弄达块石料场地形地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456588259330', '200802109', '卜寺沟成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456609230849', '200802110', '白水江多诺水电站（3#公路挡墙/改线公路边坡）地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456634396673', '200802111', '大渡河黄金坪水电站孙家沟-舍联集镇新址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456651173890', '200802112', '大渡河猴子岩水电站小金县日尔河坝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456672145410', '200802113', '大渡河猴子岩水电站色古沟1∶10000放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456697311234', '200802114', '大渡河南桠河一级水电站石棉县城河道及洗马姑至石棉河道地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456718282754', '200802115', '金沙江上游岗托水电站申弄碎石土料场地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456739254273', '200802116', '大渡河龙头石水电站瀑布沟水库影响及大渡河沿河影响地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456764420098', '200802117', '大渡河南桠河一级水电站石棉县城区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456785391617', '200802118', '大渡河黄金坪水电站姑咱', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456806363138', '200802119', '大渡河黄金坪水电站坝址至瓦斯沟口横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456827334658', '200802120', '涪江铁笼堡水电站小河沟人工骨料场放大地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456865083394', '200802121', '大渡河绰斯甲水电站闸址地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456886054914', '200802122', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456907026434', '200802123', '大渡河绰斯甲水电站下厂址磨子沟放大地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456927997954', '200802124', '南桠河石棉县城市供水线路地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456953163778', '200802125', '雅砻江二滩电站坝区地形图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456969940993', '200802126', '涪江铁笼堡水电站小河沟骨料场1∶2000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881456990912514', '200802127', '大渡河革什扎河吉牛水电站施工测量控制网2008年度复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457016078337', '200802128', '雅砻江木里河卡基娃水电站鱼类增殖站地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457037049858', '200802129', '西昌东河水库1#、2#沟交汇处拦渣坝地形地类图（200804）1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457058021378', '200802130', '大渡河龙头石水电站坝前区域原始地形图（200804）1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457087381505', '200802131', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457108353026', '200802132', '西昌东河水库厂房蓄水池地形图补测（200804）1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457129324545', '200802133', '大渡河黄金坪水电站庄上防渗料场地形图(200804)1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457154490369', '200802134', '大渡河黄金坪水电站姑咱移民安置点地质灾害评估分布地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457175461889', '200802135', '大渡河龙头石水电站坝前区域地形图测绘资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457192239106', '200802136', '大渡河双江口水电站鱼类增殖地形地类图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457213210626', '200802137', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457238376449', '200802138', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457255153666', '200802139', '宝兴县东河硗碛水电站咔日沟、蚂蝗沟地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457276125186', '200802140', '宝兴县东河硗碛水电站咔日沟、蚂蝗沟地形地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457301291010', '200802141', '西昌东河水库（厂房蓄水池/中坝址）地形地类图 1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457322262529', '200802142', '大渡河瀑布沟水电站九襄镇官坝移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457339039745', '200802143', '大渡河双江口水电站直波村安置点生产用地引水线路地形地类图 1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457360011265', '200802144', '大渡河大岗山水电站海流沟大坝砂石系统地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457380982785', '200802145', '大渡河双江口水电站水库淹没影响区红线图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457401954306', '200802146', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457422925825', '200802147', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457443897346', '200802148', '雅砻江两河口水电站库区部分地形地类图1∶2000及成果资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457464868866', '200802149', '大渡河黄金坪水电站厂区放大地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457485840386', '200802150', '北川唐家山堰塞湖等航片资料（5、12地震）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457506811905', '200803151', '苍溪水电站施控网资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457527783426', '200803152', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457544560642', '200803153', '嘉陵江苍溪航电枢纽工程施工测量控制网测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457565532162', '200803154', '塔吉克斯坦奥比欣果河流域地形图成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457586503682', '200803155', '大渡河双江口水电站神山村', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457607475202', '200803156', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457624252418', '200803157', '雅砻江两河口水电站库区部分地形地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457645223938', '200803158', '哈萨克斯坦恰伦河玛依纳水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457666195457', '200803159', '大渡河黄金坪水电站舍联集镇新址对外交通初步设计规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457687166978', '200803160', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457708138497', '200803161', '雅砻江牙根水电站坝区岩体第4期监测工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457724915713', '200803162', '大渡河猴子岩水电站汗牛大桥-门子桥增测地形地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457750081538', '200803163', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457771053057', '200803164', '大渡河双江口水电站鱼类增殖站地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457808801794', '200803165', '哈萨克斯坦恰伦河玛依纳水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457829773313', '200803166', '雅砻江二滩水电站第37期垂直位移观测工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457846550529', '200803167', '雅砻江两河口水电站瓦支沟石料场地形地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457867522049', '200803168', '雅砻江两河口水电站库区地形地类图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457888493570', '200803169', '大渡河大岗山水电站施工测量控制网2008年震后校测工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457909465089', '200803170', '大渡河大岗山水电站施工测量控制网2008年震后校测成果资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457930436610', '200803171', '哈萨克斯坦恰伦河玛依纳水电站施工测量控制网建网及首次观测测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457951408129', '200803172', '哈萨克斯坦恰伦河玛依纳水电站施工测量控制网建网及首次观测测绘成果资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457976573953', '200803173', '大渡河泸定水电站建设征地红线图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881457997545473', '200803174', '九寨沟县城景观打造白水江河道纵/横断面图/平面图/洪痕点成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458018516994', '200803175', '四川省达州市小河嘴地形图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458035294209', '200803176', '大渡河长河坝水电站江咀骨料场地形图1∶2000（增测）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458060460033', '200803177', '大渡河泸定水电站建设征地界桩测绘工作报告   同183', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458081431554', '200803178', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458106597378', '200803179', '雅砻江二滩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458127568898', '200803180', '大渡河瀑布沟水电站白鹤土地整理地形地类图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458148540418', '200803181', '西藏雅鲁藏布江藏木水电站（1号/2号/3号）渣场地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458173706242', '200803182', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458190483458', '200803183', '大渡河泸定水电站建设征地界桩成果资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458211454978', '200803184', '岷江紫坪铺水利枢纽工程变形监测基准网2008年度复测工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458232426497', '200803185', '大渡河猴子岩水电站汗牛大桥-门子桥增测地形地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458253398017', '200803186', '四川省九寨沟县城景观拦水坝工程地形地类图测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458274369537', '200803187', '大渡河长河坝水电站磨子沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458295341058', '200803188', '雅砻江二滩水电站第39期垂直位移观测工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458312118273', '200803189', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458333089793', '200803190', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458354061313', '200803191', '岷江紫坪铺水利枢纽工程水库区河道横断面测绘测绘成果资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458375032833', '200803192', '大渡河瀑布沟水电站大坝下游河床整治及景观设计地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458396004353', '200803193', '大渡河瀑布沟水电站枕头坝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458412781570', '200803194', '雅砻江楞古水电站工程区地形图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458433753089', '200803195', '大渡河猴子岩水电站色古沟施工弃渣场地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458454724609', '200803196', '雅砻江中游梯级水电站经纬度成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458475696130', '200803197', '大渡河安置点长坝、姑咱、舍联集镇新址、舍联三组', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458496667649', '200803198', '大渡河瀑布沟水电站枕头坝地形地类及断面测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458517639170', '200803199', '西昌东河水库地形图及纵横断面测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458542804993', '200803200', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458563776513', '200803201', '西藏雅鲁藏布江藏木水电站1、2号/3号渣场地形图1∶1000补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458584748034', '200803202', '大渡河猴子岩水电站道路线上居民点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458601525249', '200803203', '黑水河毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458626691073', '200803204', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458647662594', '200803205', '宝兴河民治水电站坐标转换经纬度成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458668634114', '200803206', '大渡河移民安置点坐标转换经纬度成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458689605634', '200803207', '大渡河双江口水电站施工测量控制网2008年全网首次观测工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458714771458', '200803208', '雅砻江牙根水电站坝区岩体第5期监测工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458735742977', '200803209', '大渡河瀑布沟水电站大田富庄富春白鹤向溪嘴甘溪坝及料场土地整理', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458760908802', '200803210', '大渡河双江口水电站左高线公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458786074625', '200803211', '宝兴西河出居沟水电站建设征地界桩', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458811240449', '200803212', '宝兴西河出居沟水电站建设征地界桩测绘成果资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458832211969', '200803213', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458853183489', '200803214', '迈立开江腊撒水电站坝址区地形图\\缅甸恩梅开江乌托水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458874155010', '200803215', '美姑河瓦岗河流域规划放大地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458899320834', '200803216', '白水江（多诺水电站8#路/青龙水水电站厂区）地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458932875265', '200803217', '白水江青龙、双河、多诺水电站施工测量控制网2008年度复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458966429698', '200803218', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881458999984130', '200803219', '宝兴县西河出居沟水电站3#/4#施工支洞进出口施工公路带状地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459033538561', '200803220', '白水江多诺水电站1∶1000地形图测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459071287297', '200803221', '白水江青龙水电站1∶1000地形图测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459104841729', '200803222', '大渡河黄金坪水电站舍联三组安置点后坡地形地类图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459138396162', '200803223', '大渡河瀑布沟水电站大坝下游河道整治地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459188727810', '200803224', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459222282241', '200803225', '缅甸密松水电站坝址区地形图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459260030978', '200804226', '大渡河瀑布沟水电站大田土地整理地形地类图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459293585409', '200804227', '大渡河瀑布沟水电站大树镇大瑶安置点地形地类图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459327139841', '200804228', '锦屏一级、二级和官地水电站鱼类增殖站外部变形监测招标设计', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459360694273', '200804229', '迈立开江腊撒水电站坝址区地形图1∶20000（坐标修改后）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459398443010', '200804230', '四川省大渡河瓦斯沟龙洞水电站渣场及污水处理地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459440386049', '200804231', '四川省大渡河大岗山水电站砂石系统及雨洒河沟水处理地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459473940482', '200804232', '四川省大渡河黄金坪水电站引水线路、取水口及库区防护工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459507494914', '200804233', '大渡河足木足河下尔呷水电站工程区地形地类图1∶1000/1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459541049346', '200804234', '大渡河瀑布沟水电站安乐乡洪福工业园区水厂及高位水池地形地类图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459578798082', '200804235', '美姑河瓦岗河规划瓦岗水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459608158210', '200804236', '四川省大渡河黄金坪水电站姑咱安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459641712641', '200804237', '德昌风电工程地形图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459679461378', '200804238', '雅砻江官地水电站机电仓库场地2-2号渣场地形地类图1∶200', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459713015810', '200804239', '出居沟高程坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459746570242', '200804240', '四川省雅砻江两河口水电站库区1∶2000及1∶5000地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459780124673', '200804241', '西藏雅鲁藏布江藏木水电站枢纽区地形图测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459813679106', '200804242', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459847233538', '200804243', '四川省南桠河冶勒水电站库区新增浸没影响区界桩测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459884982273', '200804244', '泸定加密界桩点之记', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459918536706', '200804245', '黑水河毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459952091138', '200804246', '大渡河足木足河下尔呷水电站库区地形图）1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881459985645570', '200804247', '大渡河黄金坪水电站舍联三组后坡危岩调查', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460023394306', '200804248', '大渡河瀑布沟水电站成勘院启迪公司地形图1∶200', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460056948737', '200804249', '大渡河南桠河一级水电站洗马姑至石棉县城河道带状地形图1/万', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460090503170', '200804250', '大渡河黄金坪水电站熊家沟至章古山移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460124057602', '200804251', '西藏雅鲁藏布江藏木水电站建设管理营地地形地类图1∶200', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460157612034', '200804252', '大渡河黄金坪水电站库区防护工程地形地类图(含水下地形1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460195360769', '200804253', '大渡河黄金坪水电站姑咱移民址征地范围线地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460228915202', '200804254', '大渡河黄金坪水电站冷竹关沟至长坝安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460262469633', '200804255', '四川省宝兴西河出居沟水电站施工测量控制网测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460296024066', '200804256', '大渡河猴子岩水电站孔玉居民点地形图（补测）1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460329578498', '200804257', '干、支流库区坐标转换成果（雅砻江坐标系－经纬度坐标）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460363132929', '200804258', '紫坪铺水利枢纽泥沙监测系统设置及库容率定报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460396687361', '200804259', '西藏雅鲁藏布江藏木水电站（1、2、3号渣场/机电安装场地）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460434436098', '200804260', '四川省美姑河坪头水电站施工测量控制网(2008年复测)工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460467990530', '200804261', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460501544962', '200804262', '岷江映秀湾水电站修复施工测量控制网测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460539293697', '200804263', '金沙江上游叶巴滩水电站邦果土料场地形地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460572848130', '200804264', '大渡河黄金坪水电站章古山', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460610596866', '200804265', '大渡河泸定水电站3号渣场地形图(200810)1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460644151297', '200804266', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460677705729', '200804267', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460715454466', '200804268', '涪江通口河唐家山堰塞湖水库区河道', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460749008897', '200804269', '2008-061四川省大渡河双江口水电站1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460782563329', '200804270', '雅砻江楞古水电站夏日滑坡及马河崩塌体地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460816117762', '200804271', '大渡河双江口水电站坝址区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460849672194', '200804272', '涪江通口河唐家山堰塞体', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460883226625', '200804273', '二滩水电站变形监测资料分析报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460920975362', '200804274', '四川省岷江映秀湾水电站修复施工测量控制网（第1测次、第2测次）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460950335489', '200804275', '西藏雅鲁藏布江加查水电站枢纽区地形地类图（含水下地形）1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881460983889922', '200804276', '大渡河双江口水电站可尔因隧洞进口地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461017444353', '200804277', '大渡河大岗山水电站雨洒河沟水处理地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461050998785', '200804278', '大渡河下尔呷水电站工程区纵断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461084553217', '200804279', '四川省安县雎水河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461118107649', '200804280', '西藏雅鲁藏布江藏木水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461151662081', '200804281', '长河坝水电站右岸卸荷拉裂岩体三维激光扫描', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461185216513', '200804282', '四川省岷江太平驿水电站施工测量控制网复建测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461218770945', '200804283', '映秀湾水电站1＃检修闸门成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461252325377', '200804284', '大渡河足木足河下尔呷水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461285879810', '200804285', '大渡河双江口水电站(右岸/左岸)坝肩原始地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461319434241', '200804286', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461357182977', '200804287', '西昌东河水库', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461390737410', '200804288', '美姑河坪头水电站（9号/5号/1-1号）渣场横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461424291841', '200804289', '四川省成都市大邑县斜江河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461462040577', '200804290', '美姑河坪头水电站柳洪沟地形地类图测绘资料集', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461499789314', '200804291', '四川省大渡河深溪沟水电站施工测量控制网（2008年复测）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461533343745', '200804292', '西藏雅鲁藏布江藏木水电站界桩、移民安置配合测量及渣场地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461566898178', '200804293', '四川省大渡河双江口水电站移民安置点及引水线路地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461600452609', '200804294', '大渡河瀑布沟水电站拉裂体横断面及大桥河床地形图测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461638201346', '200804295', '大渡河金川水电站S211省道改线Ⅱ标高低连接原始地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461671755778', '200804296', '哈萨克斯坦恰伦河玛依纳水电站地形图及配合测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461705310209', '200804297', '大渡河双江口水电站（河口渣场/英戈洛渣场/业隆沟渣场）地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461738864641', '200804298', '美姑河坪头水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461776613378', '200804299', '大渡河足木足河卜寺沟水电站木尔渣块石料场地形图（200810）1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461810167809', '200804300', '木里河卡基娃水电站则窝料场地形地类图(200812)1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461843722242', '200901001', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461877276674', '200901002', '大渡河瀑布沟水电站枕头坝  横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461910831106', '200901003', '雅砻江楞古水电站  引水线路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461948579841', '200901004', '2008-040-大渡河黄金坪水电站舍联乡舍联四组', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881461986328578', '200901005', '四川省大渡河猴子岩水电站坝区公路中桩测量测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462019883010', '200901006', '大渡河瀑布沟水电站万工乡管山移民安置点地形地类图检测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462053437442', '200901007', '卡基娃水电站坝区8#公路地形检查', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462091186177', '200901008', '控制', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462124740609', '200901009', '两河口施控网成果说明', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462158295041', '200901010', '龙滩(2004,2005,2006,2007,2008年施控网复测观测值最终成果  龙滩监测)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462191849473', '200901011', '都江堰上下基地房屋沉降及竖向垂直度观测（2008年）倾斜度计算及点位分布图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462225403905', '200901012', '大渡河足木足河下尔呷水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462258958337', '200901013', '黑水河毛尔盖水电站上寨移民址地形地类图(200807)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462296707073', '200901014', '大渡河足木足河下尔呷水电站工程区地形地类图（200812）1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462330261505', '200901015', '金沙江溪洛渡水电站巧家县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462368010242', '200901016', '塔吉克斯坦奥比欣果河努拉巴德Ⅱ水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462401564673', '200901017', '四川省汉源新县城', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462430924801', '200901018', '大渡河瀑布沟水电站丰乐乡G108至三星、拉树对外连接道路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462456090626', '200901019', '重新测量木里河卡基娃水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462472867841', '200901020', '四川省黑水河毛尔盖水电站安置区地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462489645058', '200901021', '四川省大渡河长河坝水电站磨子沟上游', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462506422274', '200901022', '四川省大渡河猴子岩水电站1∶2000增测地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462523199490', '200901023', '大渡河足木足河卜寺沟水电站木尔渣块石料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462539976705', '200901024', '安宁河三颗树水电站尾水河堤', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462556753922', '200901025', ' 四川省雅砻江二滩水电站外部变形监测资料分析报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462573531137', '200901026', '贵广铁路隧洞测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462594502657', '200901027', '四川省雅泸高速公路石棉段城市规划区拆迁安置', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462611279873', '200901028', '四川省汉源新县城对外第二通道带状地形地类图(200812)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462628057089', '200901029', '雅砻江两河口水电站瓦支沟石料场地形图(200901)1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462665805826', '200901030', '四川省大渡河黄金坪水电站移民安置点地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462707748865', '200901031', '宝兴县东河民治水电站库区地形图补测（200901）1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462741303297', '200901032', ' 雅砻江锦屏一级水电站库区移民项目老沟水库', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462774857730', '200901033', '木里县列瓦盐源县瓜别盐源县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462808412161', '200901034', '美姑河坪头水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462841966594', '200901035', '东河库区地形图 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462875521025', '200901036', '大渡河瀑布沟水电站移民安置测绘资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462909075458', '200901037', 'GPS观测数据(地震局收集)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462942629889', '200901038', '四川省汉源新县城规划调整区地形地类图(200812)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881462976184322', '200901039', '2007-107-锦屏一级水电站垃圾焚烧场、鱼类增站地形图殖', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463009738753', '200901040', '黑水河毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463043293186', '200901041', '金沙江上游岗托水电站库区地形图补测（200803）1∶2000  资用', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463076847618', '200902042', '岷江渔子溪耿达水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463110402049', '200902043', '水洛河(GPS、导线、断面、各级电站、贯标、河道平面图、基点与测图控制点)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463143956482', '200902044', '雅砻江锦屏一级水电站四川坪子移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463177510913', '200902045', '大渡河瀑布沟水电站万工乡集镇压力水池地形地类图(200902)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463211065345', '200902046', '2008-26-二滩水电站坝区及煤矿1∶5000地形图数字化', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463244619777', '200902047', 'Z2008-006-达州小河嘴1∶5000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463278174210', '200902048', 'Z2008-010楞古工程区缩放图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463311728641', '200902049', 'Z2008-012-四川省大渡河猴子岩水电站色古沟弃渣场地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463345283074', '200902050', '哈萨克斯坦玛依纳水电站引水隧洞5000   ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463378837505', '200902051', '石棉生态水利枢纽工程地形图(200902)1∶5000   ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463412391938', '200902052', '映秀闸门检测成果(1# ,2#,3#,4#)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463450140673', '200902053', '雅砻江楞古水电站库区河道', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463483695105', '200902054', '都江堰成勘院上下基地房屋沉降及竖向垂直度测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463517249537', '200902055', '四川省汉源县新县城罗布岗1∶500地形地类图及1∶1000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463554998273', '200902056', '四川省雅砻江牙根水电站对外交通公路测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463584358402', '200902057', '雅砻江锦屏一级水电站老沟水库', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463613718530', '200902058', '雅砻江楞古水电站勘探基地地形图（200902）1︰200  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463634690049', '200902059', '大渡河瀑布沟水电站枕头坝地形图（200803）1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463664050177', '200902060', '雅砻江上游水电规划仁青岭、热巴水电站库区放大地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463685021698', '200902061', '2008-064-金沙江岗托水电站库区横断面测量工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463710187522', '200902062', '大渡河绰斯甲河绰斯甲水电站沟心纵断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463735353345', '200902063', '2008-067四川省美姑河坪头水电站渣场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463760519170', '200902064', '四川省大渡河足木足河下尔呷水电站工程区、库区地形及断面测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463785684994', '200902065', '金沙江上游波罗水电站库区地形地类图补测（200812）1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463810850817', '200902066', '木里河卡基娃水电站坝区地形图(200903)1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463836016642', '200902067', '四川省绵阳市安县老鹰岩堰塞湖地形图（200903）1∶2000   ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463861182465', '200902068', '重新测量木里河卡基娃水电站坝址区1∶1000地形地类图最终完成情况', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463886348289', '200902069', '水洛河地形图 1万流域放大图（2009.3.23从李旭处拷回)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463915708417', '200902070', '岷江映秀湾水电站厂区后边坡放大地形图（200903）1︰500         ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463936679937', '200902071', '大渡河黄金坪水电站三级公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463961845762', '200902072', '贵州省都匀市 三都县贵州～广州高速铁路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881463987011585', '200902073', '四川省岷江映秀湾水电站修复施工测量控制网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464016371713', '200902074', '雅砻江锦屏一级水电站老沟水库库区地形地类图(200902)1︰2000      ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464037343233', '200902075', '四川省南桠河冶勒水电站库区临时界桩测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464062509057', '200902076', '雅砻江上游水电规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464087674881', '200902077', '四川省成都市大邑县斜江河河道综合整治 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464112840705', '200902078', ' 西藏雅鲁藏布江藏木水电站枢纽区地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464138006530', '200902079', '锦屏库区淹没影响界桩', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464167366657', '200902080', '雅砻江上游水电规划仁青岭、热巴水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464188338177', '200902081', '嘉陵江苍溪航电枢纽工程施工测量控制网测绘成果文件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464213504001', '200902082', '金川水电站 汇报', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464234475522', '200902083', '岷江福堂水电站厂房边坡地形图(200903)1∶200  正式', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464263835650', '200902084', '四川省雅砻江楞古水电站库区纵横断面测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464289001473', '200902085', '大渡河瀑布沟水电站耳足移民2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464314167297', '200902086', '岷江沙牌水电站厂址地形图(200903)1∶500    ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464339333122', '200902087', '北川开茂水库坝区、取水口、引水线路地形地类图   ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464364498946', '200902088', '四川省大渡河大岗山水电站施工测量控制网2009年复测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464389664770', '200902089', '映秀湾水电站监测、检测成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464414830594', '200902090', '映秀水电站厂区、闸区、隧洞区   资用', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464439996418', '200902091', '大渡河瀑布沟水电站耳足移民址地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464465162241', '200902092', '2008-12月孟底沟复核资料(因无施工组织计划）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464490328065', '200902093', '绰斯甲河控制点成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464515493890', '200902094', '舟坝经纬度计算', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464540659713', '200902095', '大渡河瀑布沟库区地形地类图2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464570019841', '200902096', '黄金坪、长河坝施工测量控制网2009.04报业主', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464590991361', '200902097', '四川省安县 雎水河堰塞湖地形图测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464620351490', '200902098', '四川省雅砻江木里河固增水电站施工测量控制网2009年首期资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464645517314', '200902099', '西昌东河水库', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464670683137', '200902100', '锦屏一级垮塌区域数据', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464695848961', '200903101', '岷江福堂水电站测量控制网恢复建设及地形测绘资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464721014785', '200903102', '岷江映秀湾水电站测量控制网建设及地形测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464750374914', '200903103', '金沙江上游波罗水电站库区地形地类图2000     ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464775540737', '200903104', '涪江干流中坝段河道综合整治', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464804900866', '200903105', '四川省大渡河双江口水电站公路改建施工测量控制网2009年测绘资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464825872385', '200903106', '四川省雅砻江两河口水电站公路隧洞控制网2008年度复测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464855232513', '200903107', '四川省雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464876204033', '200903108', '四川省木里河固增水电站工程区界桩测绘资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464905564162', '200903109', '四川省雅砻江两河口水电站枢纽区控制网2008年度复测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464926535681', '200903110', '大渡河老鹰岩水电站小老鹰岩新坝、厂址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464951701505', '200903111', '卡基娃水电站周边矿区边界点大地经纬度及坐标成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881464976867330', '200903112', '黑水河毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465002033153', '200903113', '宝兴西河出居沟水电站2号渣场地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465027198978', '200903114', '金沙江上游叶巴滩水电站库区地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465052364802', '200903115', '大渡河长河坝水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465077530626', '200904116', '西昌东河DEM_DOM', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465102696450', '200904117', '大渡河泸定水电站田坝乡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465127862274', '200904118', '四川省黑水河毛尔盖水电站移民、料场及灾害区测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465153028098', '200904119', '2009年工程奖申报表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465178193921', '200904120', '2008羊湖监测（上交）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465203359746', '200904121', '2008-032-大邑县斜江河河道整治地形图工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465228525569', '200904122', '2008-044-雅砻江楞古水电站勘探基地地形地类图及界桩测量工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465253691393', '200904123', '四川省安县黄洞子沟罗家大坪堰塞体地形图1︰2000        ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465278857218', '200904124', '四川省安县老鹰岩堰塞湖地形图(200903)1︰2000          正式', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465299828737', '200904125', '大渡河绰斯甲河绰斯甲水电站（磨子沟、蒲西、斯约武）料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465320800257', '200904126', '2008-45哈萨克斯坦恰伦河玛依纳水电站地形图及配合', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465337577474', '200904127', '大渡河大岗山水电站尾水洞出口地形图（200905）1∶500        ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465354354690', '200905128', '白水江多诺水电站    白水江陵江水电站   白水江黑河水电站     ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465366937601', '200905129', '雅砻江锦屏一级水电站       ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465383714818', '200905130', '雅砻江楞古水电站坝址及力邱河地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465400492033', '200905131', '2008-077-民治电站库区地形变化重测工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465421463553', '200905132', '西藏雅鲁藏布江下游水电规划地形图(200905)1∶100000     正式', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465438240769', '200905133', '丽香线金沙江特大桥2009.06 工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465467600898', '200905134', '黑水河毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465496961025', '200905135', '四川省北川县开茂水库       ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465522126850', '200905136', '映秀湾水电站检测情况说明', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465547292673', '200905137', '宝兴县东河跷碛水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465576652801', '200905138', '2008-039德昌风电工程1∶5000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465606012929', '200905139', 'Z2008-021-岗托水电站库区地形图补充测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465635373058', '200905140', '大渡河足木足河流域水电站对外交通专用公路带状地形图1∶10000   ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465664733186', '200905141', '西昌东河水库供水综合工程库区地形地类图（200812）1∶5000  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465694093313', '200905142', '云南省矿业权核查有关技术工作说明.ppt', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465723453442', '200905143', '2009年6月份勘探管理工作例会纪要（测绘）-R1.doc', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465752813570', '200905144', '大渡河双江口水电站业隆村碉棒安置点地形地类图(200905)1∶500   正式', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465782173697', '200905145', '2008-069-塔吉克奥比欣果河努拉巴德Ⅱ水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465811533825', '200905146', '雅砻江锦屏一级水电站盐源县瓜别集镇新址地形地类图(补测)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465840893954', '200905147', '西昌东河水库供水综合工程     ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465870254081', '200905148', '毛尔盖安置点位置控制点坐标经纬度成果表.xls', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465899614209', '200905149', '四川省雅砻江二滩水电站大坝外部变形观测网  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465928974337', '200905150', '2008-075-西昌东河水库供水综合工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465958334465', '200905151', '四川省北川县开茂水库引水带状地形地类图测绘资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881465983500289', '200905152', '8所神光－III', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466017054721', '200905153', '百扬大厦       燃气公司', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466042220546', '200905154', '关于“玛依纳水电站首级控制网复测与首次观测边长不一致”的回复', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466075774978', '200905155', '四川省绵阳市安县老鹰岩堰塞湖整治1∶2000地形图测绘资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466109329410', '200905156', '雅砻江锦屏一级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466134495233', '200905157', '大渡河泸定水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466155466753', '200905158', '四川省雅砻江二滩水电站大坝外部变形观测网第51期垂直位移监测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466176438274', '200905159', '1.检查报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466193215489', '200905160', '雅砻江锦屏一级水电站库区瓜别集镇新址地形地类图(200907)1∶500   ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466209992705', '200905161', '白水江黑河水电站绕纳沟人工骨料场扩测地形图(200907)1∶1000  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466226769921', '200905162', '西昌东河水库供水综合工程  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466239352833', '200905163', '2008-054宝兴东河跷碛水电站渣场地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466256130049', '200905164', '2008-056四川省雅砻江锦屏一级水电站老沟水库地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466272907266', '200905165', '2008-055盐源县瓜别洼里大坡木里地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466289684482', '200905166', '西藏雅鲁藏布江藏木水电站  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466302267393', '200905167', '雅砻江锦屏一级水电站  　', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466319044610', '200906168', '大渡河双江口水电站莫脚沟地形地类图补测（200807）1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466356793345', '200906169', '大渡河泸定水电站    ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466390347777', '200906170', '四川省德昌安宁河峡谷风电场工程放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466423902209', '200906171', '四川省岷江沙牌水库大坝厂房后边坡地形图测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466457456642', '200906172', '四川省雅砻江锦屏一级水电站库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466486816770', '200906173', '四川省雅砻江牙根水电站坝区岩体第2期监测资料测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466507788290', '200906174', '2009年羊湖监测  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466528759810', '200906175', '白水江陵江水电站磨房沟人工骨料场地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466545537025', '200906176', '雅砻江德昌安宁河三棵树水电站尾水河堤 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466562314242', '200906177', '2009-017四川省绰斯甲河绰斯甲水电站沟心断面及料场地形图工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466595868674', '200906178', '贵州省都匀市三都县贵州～广州高速铁路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466616840194', '200906179', '湄公河潘蒙水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466650394625', '200906180', '乐山港港苏稽北部（1∶500）片区地形图测绘设计书', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466683949058', '200906181', '四川省德昌安宁河峡谷风电场  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466713309186', '200906182', '四川省白水江多诺水电站料场及坝址区地形图测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466751057921', '200906183', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466780418049', '200906184', '四川省地震局数据', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466818166785', '200906185', '四川省德昌安宁河峡谷风电场检查', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466847526914', '200906186', '大渡河硬梁包水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466881081345', '200906187', '白水江陵江水电站磨房沟对岸沟内及下闸址左岸地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466918830081', '200906188', '白水江黑河水电站绕纳沟内及绕纳沟跨沟段地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466943995906', '200906189', '二滩变形观测培训班讲稿（郭火元）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466969161730', '200906190', '自贡成佳地形(成果）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881466985938946', '200906191', '四川省乐山市乐山临港苏稽北部片区地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467002716161', '200906192', '贵州省都匀市三都县贵州～广州高速铁路隧洞中线点地表坐标、高程测量工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467019493377', '200906193', '玛依纳控制网复测边长不一致原因的回复（公司）.doc', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467036270594', '200906194', '四川省木里河卡基娃水电站施工测量控制网2009年复测资料 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467048853505', '200906195', '西藏藏中100MWP光伏工程 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467065630721', '200906196', '大渡河足木足河下尔呷水电站工程区放大地形图补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467082407938', '200906197', '四川省德昌风电工程放大地形图补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467099185153', '200906198', '涪江通口河漩坪水电站库区地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467111768065', '200906199', '四川省石棉县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467128545282', '200906200', '大渡河长河坝水电站（磨子沟/野坝沟）沟口', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467145322497', '200906201', '雅砻江孟底沟水电站成勘院营地地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467162099713', '200906202', '大渡河深溪沟水电站消防水池地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467174682625', '200906203', '四川省岷江沙牌水库碾压混凝土拱坝变形监测基准网灾后恢复建设 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467191459842', '200906204', '二滩垂直位移监测第52  53  54 期（2009年7.8 9月）  工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467204042754', '200906205', '成都院蒲江农场土地利用规划地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467216625666', '200906206', '大渡河足木足河下尔呷水电站库区淹没区地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467233402882', '200906207', '大渡河硬梁包水电站    ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467250180097', '200906208', '岷江渔子溪水电站厂房地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467262763009', '200906209', '藏木界桩资料 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467279540225', '200906210', '四川省蒲江县成都院蒲江农场土地规划地形地类图测绘资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467292123138', '200906211', '四川省岷江紫坪铺水利枢纽工程变形监测基准网“5.12”地震前、地震后GPS比较测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467308900354', '200906212', '绵阳水规院所测1∶1000地形图检查复核报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467321483266', '200906213', '开茂水库放水渠安绵干渠', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467338260482', '200906214', '四川省雅砻江两河口水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467350843393', '200906215', '四川省大渡河大岗山水电站尾水洞出口', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467367620609', '200906216', '大渡河老鹰岩水电站工程开发方式研究小老鹰岩新坝址、厂址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467384397826', '200906217', '西昌市东河水库工程1∶2000地形地类图及DEM、DOM、三维地模测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467401175042', '200906218', '下尔呷水电站坝址区测量说明.doc    09年外业检查配合工作量.xls', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467413757953', '200906219', '四川省岷江紫坪铺水利枢纽工程变形监测基准网“5.12”地震前、地震后衔接关系改算报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467434729473', '200906220', '大渡河硬梁包水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467447312386', '200906221', '四川宝兴东河民治水电站建设界桩测量（2009）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467464089602', '200906222', '大渡河瓦斯沟龙洞水电站闸厂址之间及5号渣场处横断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467480866817', '200906223', '大渡河俄日河俄日水电站新厂址地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467493449730', '200906224', '黑水河毛尔盖水电站  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467510226945', '200906225', '冕宁县喜德县矿业权核查成果资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467522809857', '200906226', '大渡河泸定水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467535392769', '200906227', '大渡河瓦斯河龙洞水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467547975682', '200906228', '西藏雅鲁藏布江藏木水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467564752898', '200906229', '雅砻江桐子林水电站激光点云分类、1∶2000DEM和DOM制作测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467581530113', '200906230', '雅砻江锦屏一级水电站瓜别集镇新址地形地类图及库区影响界桩测量工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467598307329', '200906231', '四川省雅砻江锦屏一级水电站激光点云分类、1∶2000DEM和DOM制作测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467615084545', '200906232', '四川省雅砻江官地水电站激光点云分类、1∶2000DEM和DOM制作测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467636056065', '200906233', '金沙江溪洛渡水电站巧家水库坝址料场及二台坪子泵站地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467648638978', '200906234', '都江堰市成都院基地受损房屋地基不均匀沉降和竖向垂直度变形观测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467665416193', '200906235', '检查报告-大渡河硬梁包水电站闸址地形地类图检测.doc', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467682193409', '200906236', '黑水河毛尔盖水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467698970626', '200906237', '大渡河猴子岩水电站  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467711553537', '200906238', '大渡河硬梁包水电站  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467728330753', '200906239', '岷江耿达渔子溪一级水电站修复', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467740913665', '200906240', '西藏藏中100MWP光伏工程桑日县站址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467753496578', '200906241', '雅砻江牙根水电站对外交通公路测区一、二三、四、五地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467766079490', '200906242', '木里河卡基娃水电站则窝料场地形地类图测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467787051010', '200906243', '雅泸高速公路石棉段城市规化区拆迁安置草八牌居民点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467799633922', '200906244', '雅砻江锦屏一级水电站大坡乡和洼里乡地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467816411138', '200906245', '四川省雅砻江桐子林水电站施工测量控制网2009年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467837382658', '200906246', '瓦斯河龙洞水电站闸厂址及5号渣场处1∶1000横纵断面测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467870937090', '200906247', '四川省岷江草坡河沙牌水电站碾压混凝土拱坝变形监测恢复', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467904491521', '200906248', '雅砻江锦屏一级水电站古柏农场移民安置点规划地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467938045953', '200906249', '缅甸其培水电站坝址区地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881467971600385', '201001001', '大渡河长河坝水电站右岸坝前卸荷拉裂岩体三维激光扫描测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468005154817', '201001002', '四川省岷江紫坪铺水利枢纽工程变形监测基准网2009年度复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468038709249', '201001003', '雅砻江孟底沟水电站基地1∶200地形地类图及工程区永久控制点测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468072263681', '201001004', '2009年12月武测培训', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468105818113', '201001005', '西藏藏中100MWP光伏工程地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468139372546', '201001006', '四川省大渡河深溪沟水电站消防池1∶200地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468172926978', '201001007', '雅砻江中游GPS基准网成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468206481410', '201001008', '羊卓雍湖抽水蓄能电站压力钢管（明管段）永久性变形监测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468240035841', '201001009', '四川省雅砻江锦屏一级水电站老沟古柏农场移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468273590273', '201001010', '四川省通口河北川禹里乡横断面测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468307144706', '201001011', '四川省通口河北川县老县城防洪堤横断面测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468340699138', '201001012', '四川省黑水河毛尔盖水电站引水线路地形地类图测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468378447873', '201001013', '雅砻江二期激光扫描设计书_数据采集及预处理工序0120最终.pdf', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468416196610', '201001014', '岷江渔子溪水电站3#闸门检测（复测）测量报告.doc', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468449751042', '201001015', '冕宁县  喜德县  矿业权核查2010成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468483305474', '201001016', '大渡河绰斯甲河绰斯甲水电站钻孔测量说明扫描文件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468516859906', '201001017', '四川省北川县安昌镇开茂水库GPS测量控制网测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468550414337', '201001018', '大渡河黄金坪水电站姑咱、章古山安置点及上庄村防渗料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468575580162', '201001019', '雅砻江二滩水电站大坝外部变形监测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468592357377', '201001020', '文件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468609134593', '201001021', '雅砻江二滩水电站大坝外部变形观测网 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468625911809', '201001022', '四川省乐山市', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468642689026', '201001023', '沙牌基准网复建技术设计书0912', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468659466242', '201001024', '大渡河瀑布沟水电站罗卜岗控制点恢复测量测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468676243458', '201001025', '四川省大渡河足木足河下尔呷水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468693020674', '201001026', '金沙江巴楚河党恩水电站引水线路地形图测绘报告及地形图(已提交）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468709797890', '201001027', '都江堰市成都院基地受损房屋地基', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468726575105', '201001028', '高速铁路测量 课程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468743352322', '201001029', '德昌风电场一期工程施工总布置图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468760129537', '201001030', '绰斯甲水电站等', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468781101058', '201001031', '二滩位移监测 58   59   60  期成果资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468814655490', '201001032', '2010年四川省测绘质量检查研讨会资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468848209921', '201001033', '成都市龙泉区茶店镇前锋村土地整理项目 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468881764353', '201001034', '大渡河长河坝水电站野坝、江咀、牛棚子', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468919513090', '201001035', '大渡河长河坝水电站野坝沟沟口、磨子沟沟口', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468953067522', '201001036', '两河口枢纽区施控网2010年复测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881468986621953', '201001037', '四川省白水江黑河玉瓦水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469015982082', '201001038', '四川省白水江双河水电站支洞渣场地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469045342209', '201001039', '四川省大渡河绰斯甲河绰斯甲水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469070508033', '201001040', '四川省大渡河绰斯甲水电站断面及钻孔测量测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469095673857', '201001041', '万达测绘成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469129228290', '201001042', '云南省溪洛渡水电站永善县牧仰、农场小区移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469162782722', '201001043', '锦屏经纬度(2010.0524)   毛尔盖经纬度', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469200531458', '201001044', '四川省雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469234085889', '201001045', '新疆项目阿尔塔什电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469267640321', '201002046', '中石化四川资阳石油分公司简阳油库1∶500地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469301194753', '201002047', '乐山数字化图1∶1万', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469334749185', '201002048', '云南省金沙江溪洛渡水电站库区集镇', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469368303618', '201002049', '多诺水电站施工测量控制网2010年度复测资料工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469401858049', '201002050', '德昌安宁河峡谷风电场工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469435412481', '201002051', '龙头石库区地形地类2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469460578305', '201002052', '溪洛渡水电站湾河水库地形图5000    ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469485744129', '201002053', '金沙江溪洛渡水电站水库地形地类图精度统计', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469506715650', '201002054', '美姑河坪头水电站  2-1 \\6 \\ 7   号渣场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469536075777', '201002055', '通口河复兴沟口至开坪河道 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469557047298', '201002056', '大渡河雅拉河上游断裂研究放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469582213122', '201002057', '西藏藏中100MWP光伏工程 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469607378945', '201002058', '大渡河双江口水电站  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469632544770', '201002059', '大渡河绰斯甲河绰斯甲水电站减水河段横断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469657710593', '201002060', '大渡河长河坝水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469682876417', '201002061', '金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469703847938', '201002062', '金沙江巴楚河松多水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469733208066', '201002063', '雅砻江锦屏一级水电站列瓦集镇', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469758373889', '201002064', '金沙江溪洛渡水电站集镇', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469783539713', '201002065', '大渡河瀑布沟水电站汉源新县城肖落区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469808705537', '201002066', '白水江黑河水电站绕纳沟人工骨料料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469838065665', '201002067', '白水江多诺水电站   ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469859037185', '201002068', '白水江双河水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469884203009', '201002069', ' 雅砻江锦屏一级水电站四川坪子', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469909368833', '201002070', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469934534657', '201002071', '美姑河瓦吉吉水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469959700481', '201002072', '涪江通口河邓家水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881469984866306', '201002073', '二滩垂直位移监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470010032130', '201002074', '涪江通口河禹里防洪堤', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470035197953', '201002075', '大渡河龙头石水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470060363778', '201002076', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470085529602', '201002077', '金沙江溪洛渡水电站永善县溪洛渡镇', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470110695425', '201002078', '涪江通口河北川县老县城', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470140055553', '201002079', '大渡河硬梁包水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470169415682', '201002080', '雅砻江锦屏一级水电站老沟水库', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470207164417', '201002081', '金沙江溪洛渡水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470240718849', '201002082', '孟底沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470274273281', '201002083', '四川省金沙江溪洛渡水电站德昌县移民安置点地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470307827714', '201002084', '四川省乐山市乐山临港(约80平方公里)产业园区1∶1000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470341382146', '201002085', '西藏自治区普莫雍错向羊湖引水工程地形图及断面测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470379130882', '201003086', '雅砻江孟底沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470412685314', '201003087', '泸定水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470446239746', '201003088', '渔子溪水电站修复', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470479794178', '201003089', '耿达水电站施工测量控制网施测资料（2010年首期）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470513348609', '201003090', '硬梁包水电站3#桥施工测量控制网施测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470538514433', '201003091', '大渡河龙头石水电站先锋乡和共和村地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470563680258', '201003092', '提供成勘院测量资料2010.8（张琦提供天星坝）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470588846081', '201003093', '大渡河硬梁包水电站扯索沟泥石流治理地形图(201008)1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470609817602', '201003094', '雅砻江锦屏一级水电站古柏农场移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470626594817', '201003095', '雅泸高速公路石棉段城市规划区拆迁安置工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470647566337', '201003096', '雅砻江孟底沟水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470672732161', '201003097', '二滩垂直位移监测 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470693703681', '201003098', '美姑河瓦吉吉水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470714675201', '201003099', '四川坪子、老沟水库、古柏农场等', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470739841026', '201003100', '雅拉河上游规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470760812546', '201003101', '四川省大渡河泸定水电站烹坝、沙湾、伞岗坪移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470785978369', '201003102', '四川省大渡河硬梁包水电站扯索沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470806949890', '201003103', '四川省金川县城过境公路工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470832115713', '201003104', '大渡河龚嘴水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470857281538', '201003105', '四川省宝兴县东河民治水电站施工测量控制网（2010年复测）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470874058753', '201003106', '乐山临港(约80平方公里)产业园区1∶1000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470899224578', '201003107', '金沙江溪洛渡水电站坝区、库区基本控制成果.pdf', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470920196098', '201003108', '雅砻江锦屏一级水电站老沟水库渠道及列瓦集镇', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470945361921', '201004109', '大渡河龙头石水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470966333441', '201004110', '四川省雅拉河上游规划设计阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881470987304962', '201004111', '雅砻江二滩水电站大坝变形观测基准网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471012470785', '201004112', '白水江玉瓦(黑河)水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471033442306', '201004113', '大渡河瀑布沟水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471058608130', '201004114', '四川省德昌安宁河 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471079579649', '201004115', '美姑河坪头水电站厂区交通洞进口', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471100551170', '201004116', '白水江陵江水电站首部闸址以下右岸滩地地形地类图(201009)1︰1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471138299906', '201004117', '瓦斯沟龙洞水电站施工测量控制网施测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471171854338', '201004118', '龙头石水电站移民工程及2010年水毁项目地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471205408769', '201004119', '大渡河革什扎河 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471238963201', '201004120', '大渡河安谷水电站工程区地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471272517633', '201004121', '大渡河硬梁包水电站施工测量控制网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471306072066', '201004122', '大渡河硬梁包水电站厂址地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471339626497', '201004123', '四川省通口河唐家山堰塞湖综合整治施工测量控制网施测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471373180929', '201004124', '雅砻江官地水电站下围堰以下河道水下地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471406735361', '201004125', '四川省乐山市乐山地方坐标到国家2000坐标转换测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471440289794', '201004126', '西藏朗县1∶10万数字化图成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471473844225', '201101001', '四川省大渡河大岗山水电站石棉县先锋乡共和村、干海子安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471499010050', '201101002', '雅砻江1∶50000数字化扫描图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471528370177', '201101003', '西藏羊湖计算资料（2010年度）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471553536002', '201101004', '大渡河绰斯甲河绰斯甲水电站施工测量控制网(2010年报业主)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471582896130', '201101005', '沙坪二级水电站施工测量控制网复测2009    2010', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471603867649', '201101006', '雅砻江历年完成500、1000、2000工作量统计(csy).xls', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471629033474', '201101007', '绰斯甲水电站施工测量控制网(2010年首期)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471654199297', '201101008', '硬梁包水电站施工测量控制网（2010年首期）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471679365122', '201101009', '大渡河革什扎河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471704530945', '201101010', '伊朗资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471729696769', '201101011', '雅砻江二滩水电站大坝外部变形观测网2010年', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471754862594', '201101012', '雅砻江二滩水电站大坝外部变形观测网第12期', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471780028418', '201101013', '雅砻江二滩水电站大坝外部变形观测网第67期', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471805194242', '201101014', '雅砻江二滩水电站大坝外部变形观测网第68期', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471830360066', '201101015', '雅砻江二滩水电站大坝外部变形观测网第69期', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471855525889', '201101016', '耿达水电站修复施工测量2#闸门检测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471884886018', '201101017', '巴赫蒂亚里大坝和水电站工程地形图评价及补测建议.doc', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471910051841', '201101018', '嘎堆水电站永久及临时施工占地转折点坐标经纬度', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471939411969', '201101019', '四川省白水江玉瓦（黑河）、陵江水电站地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881471972966401', '201101020', '四川省大渡河大岗山桃坝渣场现状地形图测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472006520833', '201101021', '四川省大渡河安谷水电站排涝洞及附属沟渠路地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472040075265', '201101022', '四川省美姑河 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472073629698', '201101023', '四川省大渡河硬梁包水电站炸药库控制测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472107184130', '201101024', '金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472144932865', '201101025', '四川省雅砻江孟底沟水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472178487297', '201101026', '四川省岷江映秀湾水电站岷江河道纵横断面测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472212041730', '201101027', '大渡河绰斯甲河绰斯甲水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472249790466', '201101028', '嘎堆水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472283344897', '201101029', '大渡河双江口水电站业隆村', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472321093633', '201101030', '雅砻江上游资料2006 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472354648066', '201101031', '四川省遂宁市“十一五”城市基础测绘地形图新测项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472388202497', '201102032', '羊湖监测归档资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472421756929', '201102033', '西藏朗县1∶10万数字化图成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472455311361', '201102034', '白水江陵江水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472493060097', '201102035', '山东省烟台莱阳市羊郡镇风电场地形图测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472526614529', '201102036', '四川省大渡河硬梁包水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472560168961', '201102037', '瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472597917697', '201102038', '大渡河泸定水电站移民项目军事单位后缘及对外交通公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472631472130', '201102039', '四川省大渡河大岗山水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472665026561', '201102040', '岷江黑水河毛尔盖耿达厂房、渔子溪闸址、月亮地及黄家村渣场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472698580994', '201102041', '四川省大渡河龙头石水电站库区地形图及断面测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472736329729', '201102042', '四川省雅砻江孟底沟水电站水下地形及横断面测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472769884162', '201102043', '四川省雅砻江两河口水电站白孜大桥', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472803438594', '201102044', '溪洛渡水电站淹没复建公路金阳段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472836993026', '201102045', '四川省北川县禹里防洪堤地形图测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472870547457', '201102046', '大渡河安谷水电站水下地形500测绘工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472904101889', '201102047', ' 金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472933462018', '201102048', '四川省木里河卡基娃水电站垃圾焚烧站场址项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881472967016449', '201102049', '猴子岩水电站坝区边坡危岩体及潜在不稳定块体激光扫描', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473000570881', '201102050', '四川省大渡河孔玉乡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473034125314', '201102051', '四川省大渡河瀑布沟水电站库区流沙河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473063485442', '201102052', '四川省大渡河泸定水电站伞岗坪', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473097039874', '201102053', '巴楚河拉拉山水电站施工测量控制网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473130594306', '201102054', '二滩库区转换计算（80-54）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473164148737', '201102055', '乐山市坐标转换测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473197703170', '201102056', '金沙江溪洛渡水电站西昌市裕隆乡六堡村地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473231257601', '201102057', '金沙江溪洛渡水电站集镇垃圾填埋场地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473269006338', '201102058', '成都数据大致范围.dwg', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473302560769', '201102059', '唐家山监测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473336115202', '201102060', '山东省莱阳市羊郡风电场  地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473369669634', '201102061', '大渡河雅拉河上游规划沿河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473403224065', '201102062', '西藏雅鲁藏布江索朗沟嘎堆水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473440972802', '201102063', '雅砻江木里河基娃水电站垃圾焚烧站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473470332930', '201102064', '雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473503887361', '201103065', '雅砻江孟底沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473541636097', '201103066', '四川省北川开茂水库工程引水明渠', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473575190530', '201103067', '黑水河毛尔盖水电站黑水县西尔沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473612939266', '201103068', '金沙江巴楚河拉拉山水电站施工测量控制网复测2011', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473646493697', '201103069', '两河口水电站库区土料运输道路施工测量控制网2011', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473680048129', '201103070', '四川省大渡河足木足河卜寺沟水电站蒙岩沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473751351298', '201103071', '四川省大渡河猴子岩施工测量控制网资料(2011年复测）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473784905730', '201103072', '四川省白水江陵江水电站厂区渣场支洞等', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473818460162', '201103073', '金沙江溪洛渡水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473852014593', '201103074', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473885569026', '201103075', ' 扫描件 测绘成果质量检验报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473919123457', '201103076', '四川省大渡河泸定水电站水库泥沙监测系统', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473952677889', '201103077', '四川省木里河卡基娃水电站施工测量控制网2011年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881473986232322', '201103078', '四川省都江堰基地灾后重建市政工程雨污水接口高程测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474023981057', '201103079', '大渡河革什扎河两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474053341186', '201103080', '成都市温江区水韵尚城雨水井、房屋截水沟、观景道路及区间道路测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474091089922', '201103081', '大渡河双江口水电站业隆沟引水线路地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474124644354', '201103082', '大渡河干流(足木足河)卜寺沟水电站蒙岩沟地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474158198786', '201103083', '嘉陵江草街航电工程库区集镇实物指标调查配合测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474195947521', '201103084', '雅砻江官地水电站下游围堰以下河道水下地形图(201106)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474229501954', '201103085', '革什扎河吉牛水电站坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474263056385', '201103086', '湄公河潘蒙水电站数字化地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474296610817', '201103087', '四川省大渡河泸定水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474334359554', '201103088', '四川省木里河卡基娃水电站施工测量控制网2011年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474367913985', '201103089', '四川省云南省金沙江溪洛渡水电站淹没复建公路金阳段（SD208）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474401468417', '201103090', '雅砻江桐子林二滩官地锦屏2000转换54公式', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474439217153', '201103091', '四川省岷江耿达水电站施工测量控制网2011年复测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474472771586', '201103092', '西藏雅鲁藏布江下游水电规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474506326017', '201103093', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474539880449', '201103094', '大渡河长河坝水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474573434881', '201103095', '大渡河绰斯甲河绰斯甲水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474606989313', '201103096', '大渡河大岗山水电站湾东电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474640543745', '201103097', '岷江映秀水电站引水线路地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474674098178', '201103098', '西藏雅鲁藏布江下游水电规划第二阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474707652609', '201103099', '雅砻江孟底沟水电站库区地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474741207041', '201103100', '雅砻江楞古水电站相唐多吉至木炭沟地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474791538690', '201103101', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474825093121', '201103102', '福堂坝水电站坐标、高程系统复核报告.doc', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474858647554', '201103103', '雅砻江桐子林水电站左岸坝肩地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474892201986', '201103104', '大渡河瀑布沟水电站石棉县双家坪', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474925756417', '201103105', '四川省雅泸高速公路石棉段城市规划区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474959310849', '201103106', '四川省雅砻江官地水电站下游围堰以下河道', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881474992865282', '201103107', '大渡河龚嘴水电站扩建枢纽区、进水口、厂房地形图及断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475026419713', '201103108', '四川省德昌县风力发电项目Ⅱ、Ⅲ期1∶5000地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475059974146', '201103109', '四川省雅砻江牙根一级水电站地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475093528578', '201103110', '岷江紫坪铺大坝变形监测2010复测资料及土建竣工报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475127083010', '201103111', '岷江草坡河沙牌水库碾压混凝土拱坝大地测量法变形监测建议函', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475160637442', '201103112', '安谷水电站转换模型', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475189997570', '201103113', '四川省大渡河长河坝水电站下游雾化区和垃圾焚烧场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475223552002', '201103114', '四川省雅砻江两河口水电站复建公路测量测绘资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475257106434', '201103115', '大岗山水电站测区坐标高程转换计算资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475294855169', '201103116', '金沙江溪洛渡水电站峨山县化念农场地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475328409601', '201103117', '四川省大渡河瓦斯沟龙洞水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475361964033', '201103118', '岷江下游老木孔航电枢纽工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475395518465', '201103119', '西藏雅鲁藏布江尼洋河八一镇河段、雅鲁藏布江林芝机场河段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475429072898', '201103120', '四川省大渡河大岗山水电站建设征地界桩测量资料及照片', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475462627329', '201103121', ' 通口河唐家山堰塞湖水库区纵断面测量测绘工作报告 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475496181762', '201103122', '西藏自治区雅鲁藏布江索朗沟嘎堆水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475529736194', '201103123', '四川省金沙江溪洛渡体可洛集镇外部供水工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475563290626', '201103124', '四川省岷江老木孔航电工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475596845057', '201103125', '四川省大渡河大岗山水电站得妥安置点及湾东一级电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475630399489', '201103126', '四川省大渡河革什扎河两河口水电站地形地类图及断面测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475663953922', '201103127', '大渡河泸定水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475697508354', '201103128', '四川省大渡河南桠河一级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475731062786', '201103129', '四川省巴楚河松多水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475764617218', '201103130', '白水江多诺水电站1∶1000渣场地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475793977345', '201103131', '德昌县安宁河峡谷风电场二期工程阿月', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475810754562', '201103132', '大渡河硬梁包水电站工程区施工场地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475831726082', '201103133', '耿达水电站 渔子溪水电站恢复测绘测量报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475848503297', '201103134', '雅砻江孟底沟水电站水下地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475861086209', '201104135', '雅砻江两河口水电站土料场公路（一区至九区）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475877863425', '201104136', '岷江下游老木孔航电工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475890446338', '201104137', '岷江耿达水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475907223553', '201104138', ' 西藏雅鲁藏布江下游水电规划第二阶段库区，坝址区地形图测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475924000770', '201104139', ' 四川省岷江映秀湾水电站（其它阶段）耿达渔子溪821泥石', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475940777985', '201104140', '四川省北川县开茂水库工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475961749505', '201104141', '金沙江溪洛渡水电站金阳县体可洛集镇', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475974332417', '201104142', '老木孔安置点引水及电力接入点测量成果坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881475991109634', '201104143', '大渡河硬梁包水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476007886849', '201104144', '雅砻江锦屏一级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476024664065', '201104145', '大渡河长河坝水电站鱼类增殖站地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476041441282', '201104146', '雅砻江楞古水电站料场地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476058218498', '201104147', '大渡河龙头石水电站坝前区域原始地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476074995713', '201104148', '四川省泯江老木孔航电枢纽工程地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476091772930', '201104149', '西藏自治区雅鲁藏布江加查水电站横断面测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476104355842', '201104150', '四川省雅西高速公路石棉县移民安置新4号点地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476121133058', '201104151', '四川省大渡河瀑布沟水电站萝卜岗土地整理项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476137910274', '201104152', '开茂水库北川县通口河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476154687489', '201104153', '大渡河泸定水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476171464705', '201104154', '大渡河瀑布沟水电站水库移民项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476188241921', '201104155', '岷江渔子溪、耿达水电站灾后修复设计', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476205019138', '201104156', '雅砻江二滩水电站大坝外部变形监测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476221796353', '201104157', '四川省岷江渔子溪水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476238573569', '201104158', '四川省雅砻江二滩水电站水库泥沙断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476259545090', '201104159', '雅砻江牙根水电站白马梯级坝址区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476284710913', '201104160', '四川省大渡河猴子岩水电站江口组垫高防护工程场地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476309876738', '201104161', '四川省岷江渔子溪水电站修复施工测量控制网施测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476330848257', '201104162', '四川省岷江黑水河毛尔盖水电站1∶500地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476351819778', '201104163', '四川省大渡河硬梁包水电站厂区，调压井公路，首部，磨子沟及送电线路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476376985601', '201104164', '四川省大渡河绰斯甲水电站地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476397957122', '201104165', '水韵尚城南北大门雨水井、污水井补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476418928641', '201104166', '岷江下游老木孔航电工程车子镇平安移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476444094466', '201104167', '大渡河足木足河下尔呷水电站工程区放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476465065986', '201104168', '大渡河猴子岩水电站江口组垫高防护工程场地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476486037505', '201104169', '大渡河大岗山水电站石棉县先锋乡共和村', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476511203330', '201104170', '大渡河长河坝水电站鱼类增殖站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476532174850', '201104171', '四川省大渡河泸定水电站伞岗坪土地整理及军事单位复建外部供水', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476553146370', '201104172', '关于绰斯甲水电站地形图精度的情况的说明2011.1108', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476578312193', '201104173', '大渡河瀑布沟水电站汉源二中三维地形图成果1∶1000.asc', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476708335618', '201104174', '雅砻江牙根一级水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476737695745', '201104175', '雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476762861569', '201104176', '四川省安宁河洼脑水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476788027393', '201104177', '德昌阿月风电项目安宁河峡谷风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476813193217', '201104178', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476838359042', '201104179', '金沙江巴楚河松多水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476867719170', '201104180', '大渡河硬梁包水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476888690690', '201104181', '大渡河瓦斯河龙洞水电站升航沟5号渣场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476918050817', '201104182', '四川省大邑县花水湾镇供水及基础设施项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476939022337', '201104183', '岷江渔子溪耿达水电站厂房对岸生活区地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476968382465', '201104184', '大渡河大岗山水电站得妥安置点地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881476989353986', '201104185', '大渡河长河坝水电站江嘴、响水沟、汤坝、新联料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477018714113', '201104186', '雅砻江两河口水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477043879937', '201104187', '金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477073240066', '201104188', '西藏雅鲁藏布江下游水电规划第二阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477098405890', '201104189', '四川省德昌安宁河峡谷李家坝风电场 （1号-22号 ）站址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477123571714', '201104190', '四川省岷江上游生态修复研究沿河1∶5000现时水面线测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477148737537', '201104191', '雅砻江锦屏一级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477173903362', '201104192', '大渡河革什扎河二瓦槽水电站 （ 1号 4号  5号 ）碴场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477199069185', '201104193', '曲水县一期30Mwp光伏并网电站工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477224235009', '201104194', '四川省金沙江上游叶巴滩水电站（可研阶段）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477253595138', '201105195', '大渡河瀑布沟水电站水库泥沙监测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477287149569', '201105196', ' 此资料控制点成果未经转换雅鲁藏布江下游水电规划第二阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477324898306', '201105197', '羊湖抽水蓄能电站压力钢管（明管段）永久性变形监测网（2011年度）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477358452738', '201105198', '雅砻江两河口水电站库区复建公路鲜水河段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477392007170', '201105199', '白水江多诺水电站1-6号渣场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477429755906', '201105200', '西藏自治区曲水县一期30MWp光伏并网电站工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477463310338', '201105201', '四川省雅砻江二滩水电站水库泥沙断面测量（第五次测量）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477496864769', '201105202', '雅砻江官地水电站下游围堰以下河道水下地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477530419201', '201105203', '四川省木里河卡基娃水电站坝区1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477568167938', '201105204', '岷江渔子溪耿达水电站厂房对岸生活区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477601722370', '201105205', '岷江上游生态修复研究', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477639471106', '201105206', '大渡河南桠河一级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477673025538', '201105207', '岷江映秀湾水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477710774274', '201105208', '大渡河安谷水电站库区副坝工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477744328706', '201105209', '大渡河泸定水电站岔道机耕道', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477777883138', '201105210', '雅砻江上游共科甲西', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477815631873', '201105211', '四川省岷江紫坪铺水利枢纽工程大坝变形监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477849186306', '201105212', '四川省木里河沙湾水电站营地及污水井坐标高程测量测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477882740738', '201105213', '大渡河安谷水电站库区副坝工程原始地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477916295170', '201105214', '四川省德昌风电工程放大地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477954043906', '201201001', '四川省岷江上游生态修复研究1∶2000水下地形图测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881477991792642', '201201002', '雅砻江二滩水电站大坝外部变形观测网 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478025347074', '201201003', '大渡河瀑布沟水电站石棉县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478063095809', '201201004', '大渡河大岗山水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478096650241', '201201005', '四川省绰斯甲河绰斯甲水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478239256578', '201201006', '岷江映秀湾水电站鹰嘴岩地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478277005314', '201201007', '木里河沙湾水电站供水及生活区地形图(201112)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478306365441', '201201008', '大渡河安谷水电站施工测量控制网2011年复测 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478339919874', '201201009', '四川省雅砻江桐子林水电站左岸坝肩', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478373474305', '201201010', '四川省大渡河大岗山水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478411223041', '201201011', '大渡河下尔呷水电站库区横断面测量资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478444777473', '201201012', '雅砻江两河口水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478478331906', '201201013', '四川省白水江陵江水电站建设征地界桩测量测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478511886338', '201201014', '四川省范围内（2000,1980,1954）间转换关系计算报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478545440770', '201201015', '西藏雅鲁藏布江下游水电规划第二阶段断面测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478578995202', '201201016', '四川省雅砻江两河口水电站枢纽区II期施工测量控制网建网和全网观测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478612549634', '201201017', '四川省大渡河龙头石水电站库区断面测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478646104065', '201201018', '西藏卡洞加曲博磨湖水下纵断面及平面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478679658497', '201201019', '湄公河潘蒙水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478713212930', '201201020', '大渡河双江口水电站坝区1∶1000三维地形面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478746767361', '201201021', '雅砻江锦屏一级水电站大奔流滑坡地形图(201009)1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478780321793', '201201022', '四川省革什扎河二瓦槽水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478813876226', '201201023', '四川省雅砻江两河口水电站水库淹没区实物调查', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478847430657', '201201024', '遂宁市“十一五”城市基础测绘1∶2000地形图项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478880985089', '201201025', '木里河卡基娃水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478914539522', '201201026', '金沙江溪洛渡水电站黄坪集镇新址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478948093953', '201201027', '大渡河双江口界桩资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881478985842689', '201201028', '四川省岷江映秀湾水电站耿达渣场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479019397121', '201201029', '四川省安宁河德昌县前山乡10MWp光伏并网发电项目地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479052951554', '201201030', '1.四川省大渡河硬梁包水电站刘河坝移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479086505985', '201201031', '四川省木里河卡基娃水电站进水口及2#泄洪洞进水口', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479120060418', '201201032', '四川省岷江老木孔航电工程建设征地永久界桩测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479153614849', '201201033', '四川省大邑县花水湾镇天宫社区地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479187169282', '201201034', '云南省金沙江溪洛渡水电站移民黄坪迁建集镇外部供水工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479220723714', '201201035', '四川省雅砻江两河口水电站鱼类增殖站及4号公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479254278145', '201201036', '四川省雅砻江官地水电站水库淹没区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479287832578', '201201037', '四川省石棉县新棉镇向阳村、迎政乡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479321387010', '201201038', '四川省金沙江溪洛渡水电站金阳县移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479359135746', '201201039', '四川省金沙江上游叶巴滩水电站（可研阶段）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479388495873', '201201040', '四川省涪江北川震后重建工程测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479438827521', '201201041', '大渡河卜寺沟水电站公路带状地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479472381953', '201201042', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479505936385', '201201043', '大渡河革什扎河大桑水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479543685122', '201201044', '四川省云南省金沙江溪洛渡水电站移民安置点地形地类图测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479573045249', '201201045', '四川省革什扎河二瓦槽水电站界桩测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479606599681', '201202046', '四川省大渡河双江口水电站坝区、施工区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479640154113', '201202047', '四川省雅砻江上游共科水电站（预可阶段）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479673708545', '201202048', '四川省雅砻江两河口水电站寺庙、集镇新址建设用地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479707262978', '201202049', '四川省黑水河毛尔盖水电站西尔瓜子滑坡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479740817410', '201202050', '四川省岷江老木孔航电工程移民安置区测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479774371842', '201202051', '四川省白水江陵江水电站厂区、生活区、支洞渣场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479807926273', '201202052', '四川省大渡河黄金坪水电站大断面及水边线测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479841480706', '201202053', '大渡河硬梁包水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479875035137', '201202054', '四川省德昌县风电二、三期工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479908589569', '201202055', '金沙江溪洛渡水电站移民安置点地灾调查经纬度', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479942144002', '201202056', '雅砻江二滩水电站金龙山霸王山谷坡变形监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881479971504129', '201202057', '金沙江溪洛渡水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480005058562', '201202058', '金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480038612993', '201202059', '四川省大渡河龙头石水电站库区断面测量测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480072167426', '201202060', '雅砻江两河口水电站13、15号公路1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480105721857', '201202061', '四川省大渡河革什扎河 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480139276289', '201202062', '四川省大渡河瓦斯沟龙洞水电站建设征地界桩测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480168636418', '201202063', '四川省云南省金沙江溪洛渡水电站库区电子沙盘制作', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480206385153', '201202064', '四川省大渡河硬梁包水电站安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480239939585', '201202065', '四川省大渡河瀑布沟水电站移民工程地形地类图测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480273494018', '201202066', '四川省雅砻江两河口水电站库区复建公路测量测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480302854145', '201202067', '四川省大渡河瀑布沟水电站、硬梁包水电站机载激光扫描', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480323825665', '201202068', '2011  2012年全国优秀测绘工程材料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480344797185', '201202069', '大渡河流域规划沿河GPS成果表   水准面精化模型', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480365768705', '201202070', '云南省金沙江溪洛渡水电站移民安置点地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480382545922', '201202071', '岷江耿达、渔子溪水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480403517441', '201202072', '雅砻江二滩水电站金龙山、霸王山谷坡及尾水渠边坡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480416100354', '201202073', '四川省大渡河猴子岩水电站鱼类增殖站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480432877569', '201202074', '扫描件-测绘成果质量检验报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480449654785', '201202075', '岷江黑水河毛尔盖水电站西尔瓜子滑坡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480466432002', '201202076', ' 大渡河大岗山水电站库区交通复建公路GPS控制网复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480483209218', '201202077', ' 大渡河长河坝水电站（招标施工阶段）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480504180737', '201202078', '大渡河硬梁包水电站二里坝水下地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480520957954', '201202079', '四川省雅砻江孟底沟水电站杨房沟～孟底沟河段对外交通公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480537735169', '201202080', '大渡河猴子岩水电站江口组地形图(201205)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480554512386', '201202081', '西藏多雄河5万数字化图（2011年09月）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480571289601', '201202082', '遂宁Ⅲ期交省上的成果（常规测量方法）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480588066817', '201202083', '四川省雅砻江甲西水电站仁达水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480609038337', '201202084', '四川省金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480642592770', '201202085', '大渡河深溪沟水电站甘洛县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480671952897', '201202086', '四川省雅砻江楞古水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480705507330', '201202087', '岷江渔子溪水电站火烧坪', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480739061761', '201202088', '四川省大渡河大岗山水电站施工测量控制网2012年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480772616193', '201202089', '四川省大渡河猴子岩水电站（招标施工阶段）坝区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480801976322', '201202090', '四川省雅砻江两河口水电站复建公路测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480835530753', '201202091', '金沙江溪洛渡水电站移民工程卡哈洛集镇', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480877473794', '201202092', '四川省大渡河硬梁包水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480911028226', '201202093', '双江口水电站库区水准点迁建规划报告 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480944582657', '201202094', '坐标转换成果表 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881480982331394', '201202095', '岷江映秀湾水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481015885825', '201202096', '西藏自治区朋曲流域水电规划地形图及断面测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481049440257', '201202097', '四川省、云南省 金沙江溪洛渡水电站桥址测量及车渡码头', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481082994690', '201202098', '四川省长江宜宾至合江河段水电规划石棚梯级', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481116549121', '201202099', '雅砻江上游共科水电站康多沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481150103554', '201202100', '四川省雅砻江上游仁达、乐安、新龙、甲西、共科水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481183657985', '201202101', '四川省雅砻江两河口水电站料场～道孚公路中桩放线测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481221406721', '201202102', '四川省雅砻江锦屏一级水电站列瓦集镇新址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481254961154', '201202103', '四川省德昌县风电二、三期渣场、施工场地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481292709889', '201202104', '四川省大渡河猴子岩水电站江口组', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481326264321', '201202105', '四川省雅砻江桐子林水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481364013057', '201202106', '四川省会理县树堡50MWp光伏工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481397567489', '201202107', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481431121921', '201202108', '四川省德昌光伏工程1∶2000地形图测绘报告及地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481468870658', '201203109', '西藏雅鲁藏布江下游水电规划第二阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481502425090', '201203110', '西藏雅鲁藏布江藏木水电站枢纽区三维地表曲面1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481540173826', '201203111', '大渡河长河坝水电站1∶500三维地形面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481569533953', '201203112', '大渡河大岗山水电站公路带状1∶2000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481607282690', '201203113', '雅砻江两河口水电站理塘县城新区移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481640837122', '201203114', '大渡河双江口水电站鱼类增殖站地形地类图(201206)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481674391553', '201203115', '雅砻江锦屏一级水电站木里县列瓦集镇 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481707945985', '201203116', '金沙江溪洛渡水电站移民工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481745694721', '201203117', '四川省盐源凉风坳、银头山、牦牛山、观塔坡风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481779249154', '201203118', '四川省会理县树堡50MWp光伏工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481816997889', '201203119', '四川凉山州会东县拉马风、鲁南风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481854746625', '201203120', '四川省广元望江坪风电场工程放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481888301058', '201203121', '四川汉源清溪风电场放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481921855490', '201203122', '青龙双河水电站厂房料场地形图(201206)1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481955409922', '201203123', '雅砻江上游甲西水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881481988964353', '201203124', '西藏雅鲁藏布江下游水电规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482022518785', '201203125', '锦屏一级水电站老沟水库', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482056073218', '201203126', '两河口水电站枢纽区施工测量控制网2012年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482089627649', '201203127', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482127376386', '201203128', '雅砻江两河口水电站坝区三维地形面1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482160930817', '201203129', '雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482194485249', '201203130', '四川省汉源县清溪风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482232233985', '201203131', '雅砻江上游新龙水电站坝区地形地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482265788417', '201203132', '四川省雅砻江二滩水电站金龙山霸王山谷坡变形监测2012年第2期（4～6月）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482299342849', '201203133', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482337091586', '201203134', '大渡河大岗山水电站红花岗对外连接道路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482370646018', '201203135', '田湾河两天窝电站、大发电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482404200449', '201203136', '四川省凉山州会东县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482441949186', '201203137', '大渡河硬梁包水电站 (扯索坝\\店子村\\二里坝\\加郡) ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482475503618', '201203138', '金沙江叶巴滩水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482513252353', '201203139', '西藏朋曲流域水电规划康工、曲当水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482546806786', '201203140', '长江石棚水电站上坝址放大地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482580361217', '201203141', '大渡河足木足河卜寺沟水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482618109953', '201203142', '大渡河南桠河一级水电站引水线路三维地表曲面1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482651664385', '201203143', '四川省白水江青龙水电站水土保持区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482685218817', '201203144', '四川省雅砻江上游甲西水电站(预可阶段)料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482718773249', '201203145', '四川省雅砻江两河口水电站坝区三维地面激光扫描测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482752327681', '201203146', '四川省大渡河泸定水电移民项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482785882114', '201203147', '四川省岷江黑水河毛尔盖水电站河道整治', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482819436546', '201203148', '四川省大渡河冷竹关水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482852990977', '201203149', '雅砻江鲜水河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482886545409', '201203150', '四川省宝兴县东河民治水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482920099842', '201204151', '雅砻江孟底沟水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482953654274', '201204152', '雅砻江两河口水电站地质灾害评估', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881482987208705', '201204153', '雅砻江两河口水电站坝区危岩体位置标定，计算，1∶1000等值线图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483020763138', '201204154', '大渡河硬梁包水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483054317569', '201204155', '大渡河猴子岩水电站三维地形面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483092066306', '201204156', '大渡河卜寺沟水电站X6813县道复建公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483125620737', '201204157', '大渡河革什扎河二瓦槽水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483159175170', '201204158', '大渡河猴子岩水电站鱼类增殖站地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483188535298', '201204159', '锦屏一级水电站出线导、地线挂点坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483222089729', '201204160', '岷江黑水河毛尔盖水电站河道整治', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483255644162', '201204161', '岷江老木孔航电工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483285004290', '201204162', '岷江渔子溪、耿达水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483318558721', '201204163', '木里河沙湾水电站供水及生活区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483352113153', '201204164', '四川省大渡河空中激光扫描二期下尔呷库尾～沙湾', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483385667586', '201204165', '四川省雅砻江牙根二级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483419222017', '201204166', '金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483452776449', '201204167', '雅砻江两河口水电站工程枢纽区三维地形面1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483486330882', '201204168', '雅砻江上游仁达水电站坝址三维地形面1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483519885314', '201204169', '四川省通口河唐家山堰塞湖综合整治施工测量控制网建设', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483553439745', '201204170', '四川省雅砻江两河口水电站移民安置点及引水线路测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483586994177', '201204171', '大渡河瀑布沟水电站滑坡塌岸地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483620548609', '201204172', '四川省宝兴河民治电站1～3#渣场地形图测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483662491649', '201204173', '四川省鲜水河关门梁水电站坝厂区及库区地形图测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483696046082', '201204174', '四川省鲜水河朱巴水电站厂坝址、库区地形图及断面测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483729600513', '201204175', '四川省大渡河龙头石水电站库尾淤积影响挖角集镇图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483763154945', '201204176', '大渡河硬梁包水电站刘河坝地形图（201007）1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483796709378', '201204177', '雅砻江共科水电站库区地形地类图(201110)1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483830263809', '201204178', '雅砻江甲西水电站库区地形地类图（201110）1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483863818242', '201204179', '雅砻江新龙水电站库区地形地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483897372673', '201204180', '雅砻江上游仁达水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483930927106', '201204181', '西藏雅鲁藏布江多雄河卫片DOM制作', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483964481537', '201204182', '西藏雅鲁藏布江藏木水电站坝区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881483998035970', '201204183', '西藏怒江叶巴水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484031590401', '201204184', '安宁河西昌风电安宁河谷西昌境内地形图(201106)1∶50000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484065144834', '201204185', '四川省云南省金山将溪洛渡水电站DOM制作', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484098699266', '201204186', '大渡河绰斯甲河斯甲水电站库区水准点迁建规划报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484119670786', '201204187', '大渡河卜寺沟水电站X6813县道复建公路地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484149030914', '201204188', '金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484170002433', '201204189', '四川省雅砻江二滩水电站库区卫片DOM制作', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484195168257', '201204190', '四川省雅砻江上游甘孜以下河段梯级', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484220334082', '201204191', '四川省雅砻江孟底沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484245499906', '201204192', '雅砻江上游甘孜以下河段梯级', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484270665730', '201204193', '雅砻江上游甘孜以下河段梯级新龙', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484295831554', '201205194', '雅砻江上游甘孜以下河段梯级仁达', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484320997377', '201205195', '雅砻江上游乐安水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484346163202', '201205196', '雅砻江官地水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484371329026', '201205197', '雅砻江两河口水电站理塘县城新区移民安置点地质灾害评估', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484396494849', '201205198', '2000坐标系转80西安坐标系成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484421660673', '201205199', '大渡河瀑布沟水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484446826498', '201205200', '雅砻江牙根水电站对外交通工程公路初设阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484471992322', '201205201', '雅砻江格尼水电站坝区1∶2000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484497158146', '201205202', '大渡河黄金坪水电站枢纽区三维地形面1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484522323969', '201205203', '大渡河硬梁包水电站二里坝放大地形图(201205)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484547489793', '201205204', '四川省大渡河卜寺沟水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484572655618', '201205205', '四川省凉山州会东县鲁南风电场、拉马风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484597821442', '201205206', '四川省雅砻江两河口水电站公路中桩测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484622987265', '201205207', '金沙江溪洛渡水电站 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484648153089', '201205208', '四川省大渡河达维水电站公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484673318914', '201205209', '金沙江溪洛渡水电站德昌县阿月乡团山村五组', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484702679042', '201205210', '大渡河绰斯甲河绰斯甲水电站野人谷', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484736233474', '201205211', '雅砻江上游仁达水电站阿色沟砂砾石料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484769787906', '201205212', '雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484803342338', '201205213', '四川省甘孜州 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484832702465', '201205214', '雅砻江孟底沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484866256898', '201205215', '大渡河革什扎河大桑水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484899811330', '201205216', '大渡河双江口水电站可尔因沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484933365761', '201205217', '四川省大渡河硬梁包大渡河茧业公司复建新址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881484966920194', '201205218', '金沙江叶巴滩水电站达西沟沙石料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485000474626', '201205219', '雅砻江孟底沟水电站杨房沟至孟底沟河段对外交通公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485034029057', '201205220', '雅砻江共科水电站甲西水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485067583489', '201205221', '四川省广元望江坪风电场工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485101137921', '201205222', '四川省大渡河硬梁包水电站移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485134692353', '201205223', '四川省岷江渔子溪水电站厂址区1∶1000地形图测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485168246786', '201205224', '四川省金沙江溪洛渡水电站二台坪子车渡新址及引水线路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485201801217', '201205225', '四川省雅砻江两河口水电站库区13#、15#公路1∶2000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485235355649', '201205226', '西昌市高草乡大桩村三组地灾评估', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485268910082', '201205227', '四川省雅砻江上游仁达水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485302464513', '201205228', '四川省雅砻江锦屏一级水电站老沟水库工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485336018946', '201205229', '四川省甘孜州稻城县傍河乡、甘孜县霍古龙村', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485373767682', '201205230', '四川省大渡河瀑布沟水电站滑坡塌岸地形图测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485407322114', '201205231', '四川省安宁河德昌风电', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485440876545', '201205232', '四川省大渡河大岗山水电站红花岗对外连接道路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485474430978', '201205233', '岷江老木孔水电站汤家坝后靠及红岩砂石厂移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485507985410', '201205234', '四川省岷江草坡河沙牌水电站大坝恢复', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485541539841', '201205235', '金沙江溪洛渡水电站金阳县春江集镇取水口', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485575094273', '201205236', '大渡河足木足河卜寺沟水电站坝址区三维地形面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485608648705', '201205237', '西藏羊湖压力钢管永久变形监测网工作基点改造工程项目建议书', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485642203138', '201205238', '大渡河达维水电站公路地形图正式成果2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485675757570', '201205239', '四川省会理县50兆瓦光伏电站工程场址拐点坐标-经纬度转换成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485709312002', '201205240', '四川省雅砻江两河口水电站库区水准点迁建规划报告20120817', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485742866434', '201205241', '大岗山水电站征地范围内水准点迁建规划报告坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485776420865', '201205242', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485805780994', '201205243', '雅上坐标系申请资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485839335426', '201205244', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485872889857', '201206245', '报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485906444289', '201206246', '四川省雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485944193025', '201206247', '雅砻江鲜水河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881485973553153', '201206248', '四川省大渡河双江口水电站飞水岩料场及河口料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486007107585', '201206249', '雅砻江锦屏一级水电站库区普斯罗沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486040662018', '201206250', '雅砻江二滩水电站金龙山霸王山谷坡变形监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486074216450', '201206251', '四川省大渡河黄金坪水电站坝区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486107770881', '201206252', '四川省岷江黑水河毛尔盖水电站双溜索泥石流整治', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486141325314', '201206253', '岷江映秀湾水电站闸首至厂房', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486170685442', '201206254', '金沙江溪洛渡水电站西昌市高草乡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486204239874', '201206255', '四川省大渡河甘洛县大桥乡乌斯村水毁地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486237794305', '201206256', '老挝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486271348737', '201206257', '广元控制点计算成果0919.txt', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486304903170', '201206258', '雅砻江上游共科甲西仁达水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486342651906', '201206259', '四川省雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486376206338', '201206260', '雅砻江木里河卡基娃水电站坝区引水隧洞', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486409760769', '201206261', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486443315201', '201206262', '羊卓雍湖抽水蓄能电站压力钢管（明管段）永久变形网监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486476869633', '201206263', '溪洛渡水电站体可洛迁建外部供水线路控制点恢复及春江', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486510424065', '201206264', '雅砻江牙根水电站对外交通工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486543978498', '201206265', '雅砻江锦屏一级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486577532929', '201206266', '双流县规划建设用地1∶500地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486611087361', '201206267', '岷江老木孔水电站汤家坝后靠及红岩砂石厂移民安置', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486648836097', '201206268', '大渡河泸定水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486682390530', '201206269', '塞拉利昂', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486715944962', '201206270', '金沙江溪洛渡水电站西昌市同心居民点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486745305090', '201206271', '西藏阿里象泉河阿青水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486778859522', '201206272', '四川省大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486812413953', '201206273', '四川省大渡河龙头石水电站库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486845968386', '201206274', '雅砻江锦屏一级水电站老沟水库施工控制网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486875328514', '201207275', '四川省广元凉水泉风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486913077250', '201207276', '雅砻江上游共科水电站甲西水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486946631682', '201207277', '西藏雅鲁藏布江加查水电站索郎嘎咕水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881486980186114', '201207278', '雅砻江新龙水电站新龙县如龙镇', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487013740545', '201207279', '长河坝水电站长坝安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487047294977', '201207280', '大渡河大岗山水电站泸定县得妥', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487080849409', '201207281', '共科水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487114403841', '201207282', '雅砻江孟底沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487147958274', '201207283', '四川省雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487181512706', '201207284', '国电甘孜州色达县洛若乡10MW光伏电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487215067138', '201207285', '四川省大渡河长河坝水电站长坝安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487248621570', '201207286', '西藏雅鲁藏布江下游米林水库工程规划加深阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487282176002', '201207287', '西藏自治区日喀则赛维LDK日喀则30MW(一期)光伏电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487315730434', '201207288', '西藏雅鲁藏布江下游水电规划第二阶段多雄河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487349284865', '201207289', '雅砻江上游格尼水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487382839297', '201207290', '岷江渔子溪耿达水电站渔子溪一级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487416393729', '201207291', '四川省金沙江溪洛渡水电站西昌市同心居民点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487449948162', '201207292', '四川省大渡河泸定水电站白日坝右岸及伞岗坪安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487483502593', '201207293', '雅砻江格尼水电站坝址区水下地形图(201210)1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487521251330', '201207294', '雅砻江二滩水电站霸王山金龙山', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487554805761', '201207295', '老挝南腾1水电站报告（翻译）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487588360194', '201207296', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487621914625', '201207297', '雅砻江二滩水电站金龙山霸王山谷坡变形监测2012年', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487655469058', '201207298', '雅砻江甲西水电站下坝址地形图(201212)1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487689023489', '201207299', '坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487735160833', '201207300', '雅上梯级电站洪痕点成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487772909570', '201207301', '雅砻江两河口水电站库区土料运输道路施工测量控制网2012年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487802269698', '201207302', '金沙江溪洛渡水电站对坪安置点外部供水取水口', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487835824129', '201207303', '金沙江溪洛渡对坪引水线路地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487869378561', '201207304', '大渡河瀑布沟水电站双家坪移民安置点地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487902932994', '201207305', '金沙江溪洛渡水电站德溪集镇', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487936487426', '201207306', '四川省大渡河大岗山水电站雨洒河复建电站至大坝左坝肩道路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487965847553', '201207307', '大渡河瀑布沟水电站上坝公路边坡处治工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881487999401986', '201207308', '四川省革什扎河吉牛水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488032956418', '201207309', '岷江黑水河毛尔盖水电站红岩库尾', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488066510849', '201301001', '雅砻江楞古水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488100065281', '201301002', '雅砻江上游新龙水电站坝址区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488133619714', '201301003', '四川省北川开茂水库', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488162979842', '201301004', '西藏雅鲁藏布江加查水电站洛林沟内', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488196534274', '201301005', '四川省脚木足河巴拉水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488230088705', '201301006', '大渡河猴子岩水电站汗牛公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488263643138', '201301007', '四川省雅砻江上游甲西水电站过坝交通路测绘资料 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488297197569', '201301008', '大渡河瀑布沟水电站迎政乡移民新址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488330752002', '201301009', '四川省大渡河硬梁包水电站建设征地界桩测设资料报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488364306433', '201301010', '四川省大渡河安谷水电站施工测量控制网2012年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488393666562', '201301011', '雅砻江上游乐安水电站共科水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488427220994', '201301012', '嘉陵江DEM', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488460775426', '201301013', '老挝Nam Kading河NamTheun 1水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488494329857', '201301014', '攀枝花盐边县红格大面山风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488527884289', '201301015', '四川省成都市双流县规划建设用地1∶500地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488561438721', '201301016', '大岗山水电站建设征地界桩枢纽工程建设区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488594993153', '201301017', '大渡河大岗山水电站泸定县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488628547586', '201301018', '四川省大渡河猴子岩水电站界桩测绘资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488662102017', '201301019', '四川省革什扎河大桑水电站施工测量控制网测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488699850753', '201301020', '四川省广元望江坪风电场工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488733405186', '201301021', '草坡河沙牌水电站大坝恢复正常蓄水位安全监测工程询价书', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488766959617', '201301022', '四川省鲜水河朱巴水电站断面测量测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488800514050', '201301023', '二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488834068482', '201302024', '雅砻江二滩水电站金龙山霸王山谷坡稳定性监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488867622914', '201302025', '坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488901177346', '201302026', '四川省雅砻江楞古水电站对外交通公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488934731777', '201302027', '四川省雅砻江上游新龙水电站洪痕点、库区敏感位置点测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881488968286210', '201302028', '雅砻江锦屏一级水电站库区数字化地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489001840641', '201302029', '雅砻江两河口水电站鱼站横断面正式成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489035395073', '201302030', '四川省雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489068949506', '201302031', '雅砻江牙根一级水电', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489102503938', '201302032', '西藏雅鲁藏布江下游米林水库工程规划加深阶段 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489136058369', '201302033', ' 西藏雅鲁藏布江加查水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489169612801', '201302034', '阿里象泉河阿青水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489203167233', '201302035', '金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489236721665', '201302036', '雅砻江上游共科水电站麻日滑坡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489270276098', '201302037', '大渡河革什扎河吉牛水电站独狼沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489303830529', '201302038', '雅砻江两河口水电站13#、15#公路放线', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489337384961', '201302039', '四川省北川县开茂水库引渠', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489370939394', '201302040', '四川省大渡河大岗山水电站得妥安置区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489404493825', '201302041', '四川省革什扎河大桑水电站界桩测量测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489438048258', '201302042', '映秀水电站闸首至厂房地形图数字化', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489471602689', '201302043', '国电甘孜州色达县洛若乡10MW光伏电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489505157122', '201302044', '坐标转换成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489538711554', '201302045', '两河口水电站坝区枢纽区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489572265985', '201302046', '雅砻江锦屏一级水电站库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489605820417', '201302047', '老挝Nam Theun 1水电站UTM', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489639374849', '201302048', '黑水河毛尔盖水电站松黑县道', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489672929281', '201302049', '双江口水电站孟底沟水电站杨房沟-孟底沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489706483714', '201302050', '岷江黑水河毛尔盖水电站知木林移民安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489740038146', '201302051', '岷江映秀湾水电站扩机断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489773592577', '201302052', '四川省广元望江坪风电场工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489807147010', '201302053', '盐边县中水新能源万家山30MWp光伏电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489840701442', '201302054', '雅鲁藏布江索郎嘎咕水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489874255874', '201302055', '大渡河瀑布沟水电站前域沟移民连接桥', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489912004609', '201302056', ' 四川省广元望江坪风电场工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489945559041', '201302057', '经纬度转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881489979113473', '201302058', '大渡河硬梁包水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490016862210', '201302059', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490050416641', '201302060', '科特迪瓦测量报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490079776769', '201302061', '鲜水河关门梁水电站坝区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490113331201', '201302062', '唐家山堰塞湖整治项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490146885634', '201302063', '金沙江溪洛渡水电站金阳县德溪集镇', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490180440065', '201302064', '宜宾市兴文县放花溪综合整治工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490213994497', '201303065', '岷江紫坪铺水利枢纽工程库区地形测量及库容曲线计算', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490247548929', '201303066', '四川省凉山州盐源县浑水塘30MWp光伏并网电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490281103361', '201303067', '雅砻江牙根二级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490314657793', '201303068', '西藏雅鲁藏布江下游米林水库工程规划加深', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490348212225', '201303069', '革什扎河二瓦槽党岭保护区附近场地坐标', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490373378050', '201303070', '雅砻江上游新龙水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490398543874', '201303071', '羊湖抽水蓄能电站改扩建工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490427904002', '201303072', '四川省雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490453069826', '201303073', '四川省北川县开茂水库', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490478235650', '201303074', '老挝Xebangfai河塞柳XeNua水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490503401473', '201303075', '大渡河瀑布沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490528567298', '201303076', '雅砻江牙根二级水电站对外交通专用公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490553733122', '201303077', '雅鲁藏布江加查水电站浸没影响区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490578898945', '201304078', '西藏怒江叶巴水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490604064769', '201304079', '大渡河泸定水电站引水隧洞至厂区下游河道整治区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490629230594', '201304080', '四川省雅砻江锦屏一级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490662785025', '201304081', '大渡河猴子岩水电站丹巴县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490696339458', '201304082', '（塞拉利昂宾康格三级）老挝塞柳报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490725699586', '201304083', '大渡河双江口水电站建设征地界桩', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490759254017', '201304084', '雅砻江鲜水河关门梁水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490792808450', '201304085', '雅砻江上游共科水电站甲西水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490826362881', '201304086', '西藏雅鲁藏布江玉松水电站库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490855723009', '201304087', '四川省雅砻江楞古水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490889277441', '201304088', '四川省金沙江溪洛渡水电站雷波县上田坝集镇', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490922831873', '201304089', '四川省广元市望江坪风电场工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881490973163522', '201304090', '四川省大渡河瀑布沟水电站地形图及地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491006717954', '201304091', '四川省大渡河猴子岩水电站施工测量控制网2013年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491040272385', '201304092', '塞拉利昂莫阿河图索水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491073826817', '201304093', '岷江映秀湾水电站闸首至厂房地形图(201210)1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491107381249', '201304094', '科特迪瓦萨桑德拉河苏布雷水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491140935682', '201304095', '大渡河泸定水电站沙湾移民安置点引水线路地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491174490113', '201304096', '大渡河猴子岩基坑开挖1∶500地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491208044545', '201304097', '黑水河毛尔盖水电站松黑县道', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491241598978', '201304098', '雅砻江牙根二级水电站坝址区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491275153409', '201304099', '四川省雅砻江牙根一级水电站坝区、施工区、库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491308707841', '201304100', '云南省保山市天合光能保山一期49MWp并网工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491342262273', '201304101', '测绘局2000坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491380011010', '201304102', '大岗山水电站库区交通复建公路GPS控制网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491413565442', '201304103', '瀑布沟水电站永定桥地形图测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491447119873', '201304104', '牙根二级水电站坝区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491480674305', '201304105', '雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491510034433', '201304106', '大渡河猴子岩水电站基坑开挖', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491547783170', '201304107', '塞拉利昂莫阿河巴瑞卡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491577143298', '201304108', '塞拉利昂塞瓦河宾康格三级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491610697730', '201304109', '塞拉利昂小斯卡赛斯河曼盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491644252162', '201304110', '多诺水电站渣场、支洞口等地形图测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491677806594', '201304111', '大渡河瀑布沟水电站万工分散土地区、富林镇广源村浅淹没造地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491711361025', '201304112', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491744915457', '201304113', '甘孜州巴塘县巴楚河松多水电站建设征地范围打桩定界', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491778469889', '201304114', '四川西昌安宁河黄水风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491812024322', '201304115', '四川省雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491841384449', '201304116', '西藏自治区雅鲁藏布江羊湖抽水蓄能电站改扩建工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491874938881', '201304117', '四川省大渡河大岗山水电站施工测量控制网2013年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491908493313', '201304118', '西藏雅鲁藏布江加查水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491946242049', '201304119', '四川省攀枝花市盐边县中水新能源万家山光伏电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881491975602177', '201304120', '四川省南充市嘉陵江河道及西河水环境整治规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492013350914', '201304121', '金沙江溪洛渡水电站雷波县热水河沟连接道路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492046905345', '201304122', '雅鲁藏布江下游水电规划米林水库工程规划加深阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492076265473', '201304123', '中国测绘学会2013年学术年会论文集.doc', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492109819905', '201304124', '龙头石水电站施控网龙洞水电站施工测量控制网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492143374338', '201304125', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492181123073', '201304126', '大渡河永定桥水库施工区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492214677505', '201304127', '关于大岗山水电站建设征地迁建经费绘专业复核意见.doc', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492248231937', '201304128', '波罗水电站水生生态影响 影像', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492281786369', '201304129', '图西安坐标系转', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492315340802', '201304130', '炉霍光伏电站测绘局控制点计算成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492344700930', '201304131', '西藏朋曲流域水电规划吉雄库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492378255362', '201304132', '映秀湾水电站闸首', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492416004097', '201305133', '美姑河瓦吉吉水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492453752833', '201305134', '雅砻江上游共科水电站游新龙水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492487307265', '201305135', '雅砻江木里河卡基娃水电站唐央集镇', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492520861697', '201305136', '四川省雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492554416130', '201305137', '西藏雅鲁藏布江下游水电规划第二阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492587970562', '201305138', '四川省雅砻江二滩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492621524994', '201305139', '白水江玉瓦水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492655079426', '201305140', '说明', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492688633858', '201305141', '雅砻江楞古水电站坝址区, 厂址区,引水隧洞区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492722188289', '201305142', '雅砻江上游共科水电站甲西水电站仁达水电站新龙水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492755742721', '201305143', '四川省雅砻江楞古水电站对外交通公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492789297153', '201305144', '大渡河双江口水电站金川双柏树安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492822851586', '201305145', '岷江渔子溪耿达水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492856406017', '201305146', '雅砻江牙根水电站对外交通工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492885766145', '201305147', '大渡河瀑布沟水电站石棉县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492919320578', '201305148', '金沙江上游岗托水电站坝区三维地形面1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492952875009', '201305149', '四川省大渡河龙头石水电站库区横断面测量测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881492986429441', '201305150', '雅砻江两河口水电站石料场公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493019983873', '201305151', '四川省大渡河大岗山水电站水土保持监测项目地面激光扫描', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493053538305', '201305152', '四川省盐源县凉风坳、银头山风电场1∶2000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493087092738', '201305153', '四川省鲜水河甘孜州炉霍县50MWP光伏电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493120647170', '201305154', '四川省美姑河瓦吉吉水电站地形图修测、料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493154201601', '201305155', '阿青水电站施工总布置图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493187756033', '201305156', '四川省大渡河双江口水电站安置点地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493221310465', '201305157', '四川省甘孜州炉霍县50MWP光伏电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493259059201', '201305158', '四川省大渡河猴子岩水电站1∶1000地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493292613634', '201305159', '大渡河猴子岩水电站格宗乡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493326168065', '201305160', '第一次全国地理国情普查培训教材', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493359722497', '201305161', '1.四川省雅砻江二滩水电站大坝外部变形观测网（2013）  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493389082625', '201306162', '大渡河瀑布沟水电站汉源县城消落区54坐标系.dwg', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493422637058', '201306163', '检查报告-西藏米林水库', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493456191490', '201306164', '共科水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493489745922', '201306165', '四川省雅砻江二滩水电站尾水河床地形测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493523300354', '201306166', '四川省普格县风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493552660482', '201306167', '岗托、雷波县、上田坝、', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493590409217', '201306168', '四川西昌黄水、洼脑风电场地形地类图及放大图测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493623963650', '201306169', '四川省大渡河猴子岩水电站绒坝沟1∶500地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493657518082', '201306170', '四川省岷江映秀湾水电站、“709洪灾”应急治理恢复设计', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493691072514', '201306171', '黑水河毛尔盖水电站库区地形地类图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493728821250', '201306172', '九龙河江边水电站生态流量效果和生态修复方案研究项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493758181378', '201306173', '甘孜州康定县50MWP光伏电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493791735810', '201306174', '四川省金沙江金沙江上游波罗水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493825290241', '201306175', '大渡河猴子岩水电站小金县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493858844674', '201306176', '四川省雅砻江二滩水电站大坝外部变形观测网2013年', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493892399106', '201306177', '雅砻江楞古水电站成勘院基地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493930147841', '201306178', '四川省大渡河深溪沟水电站蓄水淹没区农田保护工程地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493963702273', '201306179', '.四川省白水江多诺水电站、玉瓦水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881493997256705', '201306180', '四川省九龙河江边水电站生态流量效果和生态修复方案研究项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494030811137', '201306181', '四川省木里河卡基娃水电站唐央集镇新址地形地类图测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494064365569', '201306182', '黑水河毛尔盖水电站临时用地复垦地形地类图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494097920002', '201306183', '西藏雅鲁藏布江玉松水库电站规划加深阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494131474433', '201306184', '西藏拉邦线水准点成果表.xls', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494165028865', '201306185', '四川省雅砻江两河口水电站枢纽区施工测量控制网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494198583297', '201306186', '四川省德昌风电工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494232137729', '201306187', '遂宁市河东软件园', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494265692161', '201401001', '楞古水电站力会会议纪要', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494299246593', '201401002', '坐标转换 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494332801025', '201401003', '雅砻江二滩水电站金龙山霸王山谷坡变形监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494366355458', '201401004', '大渡河龙头石水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494399909890', '201401005', '西藏雅鲁藏布江加查水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494441852929', '201401006', '四川省雅砻江楞古水电站对外交通公路力丘河公路测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494479601666', '201401007', '白水江玉瓦（原黑河）水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494513156097', '201401008', '金沙江叶巴滩水电站平硐及钻孔测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494550904834', '201401009', '四川省黑水河毛尔盖水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494584459265', '201401010', '西藏阿里象泉河阿青水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494618013698', '201401011', '老挝Nam Khan河Nam Khan 4水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494651568129', '201401012', '雅砻江牙根二级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494689316866', '201401013', '四川省大渡河猴子岩水电站门子沟汽车便道测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494722871297', '201401014', '四川省岷江渔子溪一级、耿达水电站沙牌“709洪灾”应急治理恢复设计', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494756425729', '201401015', '四川省岷江紫坪铺水电站外部变形监测控制网第3期', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494789980161', '201401016', '西藏朋曲流域水电规划康工、曲当水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494827728897', '201401017', '四川省美姑县农村集体土地确权登记发证及数据库建设', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494857089026', '201401018', '四川省南充市水环境综合整治项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494882254850', '201401019', '西藏墨脱县城规划地形图测绘及华能公司基地地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494907420674', '201401020', '四川省雅砻江两河口水电站库区雅江—道孚复建公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494932586497', '201401021', '四川省大渡河双江口水电站部分安置点地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494957752322', '201401022', '四川省大渡河龙头石水电站库区水毁项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881494987112449', '201401023', '四川省大渡河瀑布沟水电站汉源县白岩、金鸡岩土地整理', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495008083970', '201401024', '四川省南桠河一级水电站闸址区1∶500地形图修测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495033249793', '201401025', '四川省大渡河长河坝水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495058415617', '201401026', '四川省雅砻江楞古水电站坝厂址及引水线路三维地形面制作', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495083581442', '201401027', '西藏雅鲁藏布江下游水电规划米林水库工程规划加深', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495108747266', '201401028', '墨脱县汗密基地和阿尼桥基地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495133913089', '201401029', '大渡河猴子岩水电站格宗乡水下地形、断面、滑坡及地面激光扫描测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495159078914', '201401030', '四川省金沙江溪洛渡水电站芦稿高边坡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495192633345', '201401031', '四川省岷江黑水河毛尔盖水电站交通工程1∶2000地形图补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495226187777', '201401032', '四川省甘孜州康定县50MWP光伏电站地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495259742209', '201401033', '四川省大渡河黄金坪水电站章古山', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495293296642', '201401034', '四川省大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495326851074', '201401035', '四川省大渡河泸定水电站小沙湾团组1∶500地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495360405506', '201401036', '西藏雅鲁藏布江玉松水库电站规划加深阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495393959938', '201401037', '锦屏一级水电站水库泥沙监测报告(初审修改）.doc', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495423320065', '201401038', '西藏墨脱县西工河流域亚让水电站施工测量控制网建网及首期观测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495456874498', '201401039', '金沙江溪洛渡水电站库区黄码公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495490428929', '2013YD-05-03', '四川省雅砻江上游共科水电站雄龙西沟和期尺林沟1∶2000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495523983361', '201401041', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495557537794', '2013YD-53-1', '四川省大渡河石棉县老鹰岩三级水电站1∶2000断面测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495591092226', '2014K03-1', '四川省雅砻江上游新龙水电站下坝址至新龙县城1∶2000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495624646657', '201401044', '大渡河大岗山水电站得妥', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495658201089', '201401045', '雅砻江仁达水电站 新龙水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495691755521', '201401046', '亚卓瓦多集镇施工控制网复测问题回复', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495725309954', '201401047', '西藏怒江叶巴水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495763058690', '201401048', '四川省广元望江坪风电场工程地形地类图补测(201306)1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495796613121', '201401049', '大渡河深溪沟水电站甘洛县大桥乡新增地质灾害点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495830167554', '201401050', '黑水河毛尔盖水电站小黑水河大桥段放大地形图(201308)1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495863721986', '201402051', '1.四川省雅砻江二滩水电站金龙山霸王山谷坡变形监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495897276418', '201402052', '金沙江溪洛渡水电站四川库区新增滑', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495930830849', '2014K07-01', '四川省雅砻江上游牙根二级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495964385282', '201402054', '四川省大渡河瀑布沟水电站库区移民', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881495997939714', '2013YD-08-04', '四川省雅砻江楞古水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496031494146', '201402056', '大渡河双江口水电站坝区下游至下尔呷水电站库区断面测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496056659969', '201402057', '四川省普格海口风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496081825794', '201402058', '美姑井叶特西风电场和雷波拉咪北风电场放大地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496106991617', '201402059', '四川省雅砻江两河口水电站瓦多集镇亚卓集镇控制点恢复测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496132157442', '201402060', '四川省德昌县安宁河谷德州风电场项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496161517569', '201402061', '2013送测绘局检查乐山临港产业园区临港苏稽北部片区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496186683394', '201402062', '白水江多诺水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496207654914', '2014HB03-1', '四川省大渡河长河坝水电站环境保护设计技施阶段测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496224432130', '2014K04-01', '四川省雅砻江楞古水电站生态研究横断面及水下地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496241209345', '201402065', '大渡河泸定水电站坝后环保景观电站及下游河道整治1∶1000地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496253792257', '2014XNY02-1', '中海阳会理光伏发电产业园300MWP光伏发电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496270569474', '2014K07-2', '四川省雅砻江牙根二级水电站雅江县米龙乡、麻郎措乡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496287346689', '201402068', '说明', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496304123906', '201402069', '四川省金沙江溪洛渡水电站芦稿高边坡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496320901122', '201402070', '金沙江溪洛渡水电站雷波县上田坝集镇对外连接道路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496337678337', '201402071', '大渡河大岗山水电站移民安置规划项目低', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496354455554', '201402072', '四川省大渡河安谷水电站施工测量控制网2013年复测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496371232770', '201402073', '雅砻江牙根二级水电站对外交通专用公路地形图（201110）1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496388009986', '201402074', '雅砻江孟底沟水电站库区地形图补测（201404）1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496404787201', '201402075', '1.四川省雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496417370113', '201402076', '四川省广元市旺苍云雾山150MW风电场放大地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496429953025', '201402077', '四川省大渡河猴子岩水电站泥洛堆积体地形图补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496442535937', '201402078', '四川省金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496459313153', '201402079', '四川省雅砻江楞古水电站库区、厂区地形图补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496476090369', '201402080', ' 西藏自治区贡嘎县羊湖抽水蓄能电站改扩建工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496488673282', '201402081', '.西藏雅鲁藏布江下游河段水电规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496505450497', '201403082', '西藏雅鲁藏布江玉松水库电站规划加深阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496526422017', '201403083', '雅砻江二滩水电站大坝外部变形观测网第', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496559976449', '201403084', '2014.5第五期 四川省大渡河瀑布沟水电站库区移民安置', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496593530882', '201403085', '国情普查设计书及实施方案201407', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496627085313', '201403086', '四川省大渡河大岗山水电站移民安置规划项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496660639745', '201403087', '四川省大渡河猴子岩基坑开挖地面激光扫描三维地形面1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496689999874', '201403088', '四川省大渡河猴子岩水电站门子沟和莫玉大桥公路测量测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496723554305', '201403089', '四川省大渡河瀑布沟水电站甘洛县耳足安置', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496757108738', '201403090', '四川省大渡河瀑布沟水电站雅安市荥经县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496790663169', '201403091', '四川省黑水河毛尔盖水电站闸门井平台、边坡1∶1000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496824217601', '201403092', '四川省火溪河干流梯级电站减水河段地形图及断面图测量测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496861966338', '201403093', '四川省瓦斯河小天都水电站减水河段各工况下的水下', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496895520770', '201403094', '四川省金沙江金沙水电站施工测量控制网2014年复测资料 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496929075202', '201403095', '四川省西昌市黄联关风电场1∶2000地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496962629633', '201403096', '四川省雅砻江两河口水电站移民安置', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881496996184066', '201403097', '四川省雅砻江二滩水电站金龙山谷坡稳定性分析报告及附件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497025544194', '201403098', '西藏雅鲁藏布江玉松水库电站（小）大渡卡、多雄取水口地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497059098626', '201403099', '西藏雅鲁藏布江规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497096847362', '201403100', '西藏雅鲁藏布江米林水库工程规划加深阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497130401794', '201403101', '1.四川省雅砻江二滩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497159761921', '201403102', '西藏自治区金沙江上游岗托水电站黄格土料场地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497197510657', '201403103', '四川省阿坝州阿坝县麦尔玛光伏电站地形地类图测绘测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497231065090', '201403104', '四川省金沙江叶巴滩水电站建设征地移民安置地形地类图测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497264619521', '201403105', '四川省金沙江叶巴滩水电站降曲公路及料场地形地类图测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497298173954', '201403106', '金沙江叶巴滩水电站尾水出口区及俄德西沟料场区三维地形面1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497331728385', '201403107', '大岗山水电站工程坝前500米范围内正常蓄水位以下地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497365282818', '201403108', '冕宁铁厂乡风电场放大地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497398837249', '201403109', '四川省黑水河毛尔盖水电站移民安置', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497432391681', '201403110', '四川省大渡河黄金坪水电站时济乡桥', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497465946113', '201403111', '四川省黑水河毛尔盖水电站红岩乡竹格多移民集中安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497499500545', '201403112', '西藏山南地区措美县当许20MW大型光伏电站1∶2000地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497537249281', '201403113', '西藏雅鲁藏布江玉松水库工程规划加深阶段库区地形地类图补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497570803713', '201403114', '四川省雅砻江牙根二级水电站斗地新址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497604358146', '201403115', '西藏自治区朋曲流域水电站规划横断面、地形图及放大图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497637912578', '201403116', '四川省雅砻江孟底沟杨房沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497675661313', '201403117', '四川省大渡河大岗山水电站河道疏浚断面测量测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497709215745', '201403118', '四川省雅砻江两河口水电站枢纽区施工测量控制网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497742770178', '201403119', '四川省阿坝州阿坝县麦尔玛光伏电站放大地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497776324609', '201403120', '1.四川省甘孜州金平金元水电站厂区边坡安全监测控制网复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497809879041', '201403121', '四川省大渡河大岗山水电站施工测量控制网2014年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497847627777', '201403122', '猴子岩水电站格宗移民安置点施工测量控制网设计、建网及首期观测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497876987905', '201403123', '金沙江溪洛渡水电站四川库区、云南库区界桩及红线图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497910542338', '201403124', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497944096770', '201403125', '补充测绘（汗密~背崩及排龙~雅鲁藏布江河口）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497973456897', '201403126', '羊卓雍湖抽水蓄能电站压力钢管（明管段）永久性变形监测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881497998622721', '201403127', '西藏雅鲁藏布江玉松水电站多雄拉山公路隧洞', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498019594241', '201403128', '西藏朋曲流域水电规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498040565761', '201403129', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498061537282', '201403130', '四川省广元凉水泉风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498078314497', '201403131', '雅砻江两河口水电站瓦多', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498103480321', '201403132', '西藏雅鲁藏布江下游米林水库工程规划加深阶段库尾补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498124451841', '201403133', '四川省大渡河大岗山水电站海流沟泥石流防护工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498145423362', '201403134', '美姑井叶特西风电场和雷波拉咪北风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498162200578', '201403135', '四川省遂宁市“十一五”城市基础测绘地形图新测项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498183172098', '201403136', '雅砻江上游控制点成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498208337921', '201405137', '大渡河猴子岩水电站格宗乡危岩体激光扫描三维地形面1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498229309441', '201405138', '金沙江叶巴滩水电站坝区地形地类图（201110）1︰1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498250280961', '201405139', '金沙江叶巴滩水电站坝址区三维地形面1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498271252482', '201405140', '金沙江叶巴滩水电站尾水出口区及俄德西沟料场区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498292224001', '201405141', '叶巴滩水电站降曲河～金沙江河口公路测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498309001217', '201406142', '西藏雅鲁藏布江玉松水库电站规划加深阶段库区补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498325778434', '201406143', '雅砻江二滩水电站大坝外部变形观测网2014', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498346749954', '201406144', '四川省乐山市乐北组合城市地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498367721473', '201406145', '四川省大渡河瀑布沟水电站移民安置场地工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498392887298', '201406146', '四川省德昌县安宁河谷德州风电场（德昌四期）和黄家坝风电场（德昌五期）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498409664514', '201406147', '四川省雅砻江两河口水电站移民安置点规划项目测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498430636033', '201406148', '四川省雅砻江上游新龙水电站庄果沟料场1∶1000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498451607553', '201406149', '大渡河瀑布沟水电站进场交通洞口地形图（201411）1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498476773378', '201406150', '长江宜宾至重庆河段水电规划项目支流地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498493550593', '201406151', '西藏自治区朋曲康工水电站库尾公路桥地形图(201410)1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498514522114', '201406152', '大渡河泸定水电站冷竹关村二组库岸防护工程地形地类图(201412)1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498539687938', '201406153', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498560659458', '2014G08-1', '四川省大渡河猴子岩水电站焦子坪小金大桥', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498581630977', '2014K17-5', '四川省西藏自治区金沙江叶巴滩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498602602498', '2014K23-1', '四川省雅砻江上游共科和乐安水电站滑坡及料场控制点恢复测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498623574017', '2014W07-2', '大渡河猴子岩水电站格宗', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498644545538', '2014ZCB01-2', '四川省白水江玉瓦水电站引水隧洞检测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498661322754', '2014ZD05-2', '四川省黑水河毛尔盖水电站麻窝集镇新址-西尔地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498682294274', '2014ZD08-1', '四川省大渡河泸定水电站冷竹关村二组库岸防护工程地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498703265794', '201501008', '扫描件-测绘成果质量检验报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498724237313', '201501009', '大渡河大岗山水电站移民安置规划项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498745208833', '201501010', '大渡河泸定水电站小沙湾组团地形图(201402)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498761986050', '201501011', '大渡河瀑布沟水电站汉源县土地整理', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498787151874', '201501012', '大渡河深溪沟水电站蓄水淹没区农田保护工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498808123394', '201501013', ' 猴子岩水电站库区地形图检查修改图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498829094913', '201501014', '孟底沟水电站水库淹没区打桩定界图坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498845872130', '201501015', '四川省白水江玉瓦水电站施工测量控制网2014年复测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498862649346', '201501016', '四川省大渡河安谷水电站施工测量控制网2014年复测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498879426561', '201501017', '四川省大渡河大岗山水电站正倒垂观测装置安装放线测量测绘报告 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498908786690', '201501018', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498925563905', '201501019', '四川省大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498938146818', '201501020', '四川省乐山市乐北组合城市地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498954924034', '201501021', '四川省岷江紫坪铺水电站外部变形监测控制网第4期', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498971701250', '201501022', '四川省雅砻江两河口水电站控制网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881498988478465', '201501023', '遂宁市软件服务外包产业园', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499005255681', '201501024', '西藏雅鲁藏布江加查水电站下游天然河段1∶1000横断面测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499017838593', '201501025', '西藏雅鲁藏布江背崩至阿尼桥公路测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499030421505', '201501026', '雅砻江桐子林水电站地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499043004417', '201501027', '雅砻江两河口水电站甘孜藏族自治州雅江县遥感监测图斑中心点坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499055587330', '201501028', '雅砻江楞古水电站对外交通公路1∶2000地形地类图 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499072364546', '201501029', '西藏自治区雅鲁藏布江玉松水电站多雄拉山', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499089141762', '201501030', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499101724673', '2014K04-03', '四川省雅砻江楞古水电站坝区1∶1000危岩体分布三维激光扫描', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499114307585', '2014K17-4', '四川省金沙江叶巴滩水电站坝区、尾水出口、俄德西沟料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499126890498', '2014K22-1', '四川省雅砻江孟底沟水电站坝区危岩体分布', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499143667714', '2014W10-1', '四川省云南省金沙水电站塘坝河生态环境修复工程1∶2000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499156250625', '2015XNY03-1', '四川省阿坝州阿坝县麦尔玛光伏电站(麦尔玛四村)1∶2000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499173027841', '201501036', '四川省大渡河双江口水电站施工测量控制网2015年复测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499189805058', '201501037', '四川省雅砻江两河口水电站库区复建公路施工测量控制网2014年度复测测绘文件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499206582274', '2014XNY07-1', '四川省广元市凉水泉风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499240136705', '2015K04-02', '四川省西昌市黄联关风电场风机位位置坐标高程测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499277885442', '2015K03-1', '四川省雅砻江楞古水电站力邱河沿岸火山村', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499307245570', '2015K05-2', '四川省西藏自治区金沙江叶巴滩水电站鱼类增殖放流站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499340800001', '2015K10-1', '四川省雅砻江桐子林水电站坝址至桐子林水文站河段地形图测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499374354433', '201501043', '西藏自治区金沙江上游叶巴滩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499407908865', '201501044', '地理国情普查交测绘局成果（二查记录及检查报告）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499441463298', '201501045', '猴子岩水电站泥沙监测测量方案及单价预算表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499475017729', '201501046', '国网羊湖抽水蓄能发电公司', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499508572162', '201501047', '四川省西藏自治区金沙江上游叶巴滩水电站施工测量控制网建设资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499542126593', '201501048', '雅砻江孟底沟水电站库尾左岸补测地形图(201410)1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499575681025', '201501049', '四川省普格甘天地风电场1∶2000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499609235458', '201501050', '四川省大渡河双江口水电站热马都料场1∶2000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499642789889', '201501051', '西藏林芝华能职工住宅楼沉降监测第一期简报', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499676344321', '201501052', '四川省大渡河猴子岩水电站焦子坪安置点引水线路1∶2000地地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499714093058', '201501053', '大渡河瀑布沟水电站黑马防洪沟地形图(201505)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499739258882', '201501054', '西藏雅鲁藏布江哈果桥水电站地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499760230401', '2014K20-1', '四川省长江至宜宾河段水电规划项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499781201921', '2015G03-1', '四川省大渡河双江口水电站松岗至热足G317复建公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499797979137', '2015k14-1', '雅鲁藏布江索朗沟嘎堆水电站压力管道', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499814756354', '2015SZ02-1', '雅砻江上游梯级（新龙、仁达、乐安和格尼水电站）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499831533570', '2015XNY02-1', '盐源县牦牛山风电场1∶2000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499852505089', '2015ZD07-1', '四川省大渡河猴子岩水电站索龙沟桥1∶500地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499869282305', '201502061', '四川省大渡河双江口水电站金川县双柏树', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499886059521', '201502062', '四川省大渡河硬梁包水电站施工测量控制网2015年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499907031042', '201502063', '四川省雅砻江牙根一级水电站建设征地区和淹没影响区临时界桩', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499923808258', '201502064', '金沙江叶巴滩水电站枢纽区环境边坡危岩体地面激光扫描', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499940585473', '201502065', '.雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499957362689', '201502066', '西藏自治区雅鲁藏布江下游水电规划阶段补充测绘古洪水断面', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499974139906', '201502067', '四川省盐源县凉风坳、银头山风电场GPS点成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881499990917121', '201502068', '大渡河大岗山水电站水库区滑坡监测自动化系统建设GPS监测招投标文件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500007694338', '201502069', '西藏自治区雅鲁藏布江哈果桥项目可研阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500024471553', '201502070', '大渡河猴子岩水电站水库泥沙监测系统设计专题报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500041248769', '201502071', '转坐标', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500058025985', '201502072', '西藏雅鲁藏布江玉松水库电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500074803201', '201502073', '四川省白水江多诺水电站改线公路病害治理一期工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500091580417', '201502074', '四川省雅砻江孟底沟水电站可研阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500108357634', '201502075', '关于核准实施方案完成备案的函', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500125134850', '201502076', '四川省大渡河瀑布沟水电站甘洛县耳足安置点供水工程1∶1000地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500141912066', '201502077', '新疆维吾尔自治区亚曼苏水电站施工测量控制点复核测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500158689282', '201502078', '雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500175466497', '201502079', '四川省甘孜州金元水电站金平水电站安全监测控制网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500196438017', '201502080', '四川省盐源县凉风坳、银头山风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500221603841', '201502081', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500255158274', '201502082', '四川省雅砻江两河口水电站枢纽区施工测量控制网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500284518402', '201502083', '四川省大渡河猴子岩水电站施工测量控制网2015年复测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500318072833', '201502084', ' 二滩', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500351627265', '201502085', '两河口水电站库区移民安置点（市政工程）转换后、修改图框后成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500380987393', '201502086', '金沙江叶巴滩水电站坝区危岩体危岩区激光扫描成果（2015年8月）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500414541826', '201502087', '西藏金河流域及勒珠水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500460679170', '201502088', '哈果桥用地范围坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500494233601', '201502089', '20151022雅砻江生态保护红线斑块坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500527788033', '201502090', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500557148162', '201502091', '四川省云南省金沙江溪洛渡水电站天星坝水库控制网设计、建网及首期观测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500590702593', '201503092', '楞古水电站坝址区危岩体地面激光扫描数据成果(2015-11-01)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500624257025', '201503093', '大渡河硬梁包水电站加郡乡隧道35KV施工变电站地形图（201511）1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500653617153', '201503094', '四川省大渡河瀑布沟水电站黑马防洪沟地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500691365890', '201503095', '大渡河汉源县共和村二、三组土地容量复核测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500720726018', '201503096', '羊湖抽水蓄能发电公司压力钢管永久变形监测网工作基点维修施工2015', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500754280450', '201503097', '四川省西藏自治区金沙江上游叶巴滩水电站建设征地界桩测设', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500787834881', '201503098', '四川省雅砻江锦屏一级水电站竣工安全鉴定阶段水位～面积～库容曲线量算报告文件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500821389313', '201503099', '四川省威远县2015年农村产权制度改革测绘控制测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500850749442', '201503100', '西藏雅鲁藏布江下游水电规划米林水库工程规划加深阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500884303874', '201503101', '西藏金河勒珠水电站预可研阶段地形图数字化', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500917858305', '201503102', '四川省雅砻江二滩水电站库区界桩测量点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500951412738', '201503103', '雅砻江桐子林水电站坝址至桐子林水文站河段复核地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881500980772865', '201504104', '雅砻江两河口水电站移民安置点供水工程及取水口地形图坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501014327298', '201504105', '四川省西藏自治区金沙江叶巴滩水电站枢纽区环境边坡危岩体地面激光扫描', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501047881730', '201504106', '金沙江溪洛渡水电站雷波库区复建公路溜卡路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501081436161', '201504107', '四川省雅砻江桐子林水电站坝址至桐子林水文站河段地形图复核及断面测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501114990594', '201504108', '成都4号地铁高站台门放线测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501148545025', '201504109', '西藏雅鲁藏布江米林水库工程康扎和米瑞料场测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501182099457', '201504110', '大渡河瀑布沟水电站耳足移民', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501211459586', '201504111', '中电投攀枝花仁和区光伏', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501245014018', '201504112', '四川省金沙江溪洛渡水电站雷波县水文站吊桥工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501278568450', '201504113', '四川省白水江玉瓦水电站施工测量控制网2015年复测及隧洞检测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501312122882', '201504114', '四川省大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501345677313', '201504115', '黑水河毛尔盖水电站麻窝乡白尔窝场地地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501379231745', '201504116', '雅砻江孟底沟水电站张牙沟地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501412786178', '201504117', '黑水河毛尔盖水电站麻窝乡白尔窝场地测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501458923522', '201504118', '大渡河双江口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501492477953', '201504119', '四川省德昌马鞍山、茨达、腊八山一期风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501526032386', '201504120', '四川能投培训基地平面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501559586818', '201504121', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501597335553', '201504122', '四川省大渡河黄金坪水电站招标施工阶段1∶1000断面测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501626695681', '201504123', '金沙江溪洛渡水电站库区（云南）马石镇石盘组机耕道', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501660250114', '201504124', '大渡河硬梁包水电站下闸址德威大河堰带状地形图(201504)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501693804545', '201504125', '金沙江叶巴滩水电站枢纽区放大地形图(201508)1∶500（增加范围）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501723164674', '201504126', '几内亚高速公路地形图数字化', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501756719106', '201504127', '金沙江叶巴滩水电站导流洞出口、尾水部位放大地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501794467841', '201504128', '四川省冕宁县铁厂乡风电场测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501828022274', '201504129', '四川省普格采乃乡风电场放大地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501865771010', '201504130', '四川省盐源县牦牛山凉风坳风电场升压站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501895131137', '201504131', '西藏雅鲁藏布江派镇至解放桥农村公路工程测量配合测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501928685569', '201504132', '四川省道孚县', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501962240002', '201504133', '金沙江叶巴滩水电站枢纽区放大地形图(201508)1∶500（高程投影）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881501995794433', '201504134', '雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502029348865', '201504135', '米林水文站坐标80坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502062903297', '201504136', '四川省雅砻江两河口水电站移民安置规划项目1∶2000地形图补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502100652033', '201504137', '四川省雅砻江两河口水电站库区公路补图1∶2000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502130012161', '201504138', '云南省金沙江溪洛渡水电站库区（云南）马口镇石盘组机耕道地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502163566594', '201504139', '四川省盐源县银头山风电场机位1∶500地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502197121026', '201504140', '雅砻江流域空间地理信息数据产品采集 文字资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502230675458', '201505141', '西藏雅鲁藏布江玉松水库电站规划加深阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502264229890', '201505142', '利比里亚圣约翰河沿河地形图1∶50000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502301978625', '201505143', '测绘成果质量检验报告扫描件-杨房沟-孟底沟河段对外交通公路测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502335533058', '201505144', '检验报告-邻水县农村土地承包经营权确权登记 扫描件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502369087490', '201505145', '金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502402641922', '201505146', '扫描件  1测绘地理信息成果质量检验报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502436196354', '201504147', '利比里亚圣约翰河沿河地形图1∶50000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502465556482', '201504148', '测绘成果质量检验报告扫描件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502499110913', '201504149', '检验报告-邻水县农村土地承包经营权确权登记 扫描件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502536859649', '201504150', '金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502570414081', '201504151', '扫描件-测绘地理信息成果质量检验报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502603968513', '201601001', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502637522946', '201601002', '水电测绘西南交大授课材料（马如坤20160412)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502671077378', '201601003', '垫江县第二次土地调查文字报告201604', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502700437506', '201601004', '四川省遂宁市软件服务外包产业园主体建筑变形监测沉降测量成果表 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502733991938', '201601005', '四川省金沙江溪洛渡水电站四川云南库区新增滑坡界桩', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502767546370', '201601006', '利比里亚河流水电规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502801100801', '201601007', '.四川省西昌黄联关风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502826266625', '201601008', '西藏雅鲁藏布江林芝水电站厂玉松水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502847238146', '201601009', '老挝蒙宏抽水蓄能电站放大地形图(201603)1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502868209666', '201601010', '四川省普格大唐海口风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502884986882', '201601011', '四川省雅砻江两河口水电站导流洞', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502901764097', '201601012', '金沙江叶巴滩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502918541313', '201601013', '20160420雅砻江桐子林水电站坝址至桐子林水文站河段复核地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502931124226', '201601014', '四川省雅砻江流域 DEM、DOM制作', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502947901442', '201601015', '四川省大渡河双江口水电站石广东珍稀植物园1∶1000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502960484354', '201601016', '何家山罗圈岩风电场项目补测矢量化成图（正式）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502977261569', '201601017', '四川省西昌市海河流域水环境综合整治一期启动区1∶500地形图测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881502985650177', '201601018', '金沙江溪洛渡水电站库区布拖县啊布洛吊桥复建工程1∶500地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503002427393', '201601019', '西藏雅鲁藏布江下游机载激光雷达数据采集', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503015010305', '201601020', '大渡河老鹰岩水电站库区地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503031787521', '201601021', '四川省岷江沙牌水电站厂区河道1∶500横断面测量测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503048564738', '201601022', '老挝Nam Bi 1万地形图(105°UTM)坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503065341953', '2016ZD04-1', '四川省大渡河猴子岩水电站丹巴县阿都地土地整理工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503098896386', '201601024', '四川省盐源县银头山风电场机位地形图1︰500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503132450818', '2016K15-1', '老挝色拉龙一级水电站天然建筑材料场地1∶2000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503166005250', '2016K14-1', '四川省青衣江宝兴河硗碛水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503199559681', '201602027', '大渡河硬梁包水电站库区地形地类图（201003）1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503233114113', '201602028', '金沙江溪洛渡水电站天星坝水库库区地形地类图(201103)1︰2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503266668545', '201602029', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503312805890', '2016K09-1', '西藏自治区雅鲁藏布江米林水库规划加深阶段拉丁料场1∶2000地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503346360321', '201602031', '四川省雅砻江两河口水电站鱼类产卵场工程曲如河及和平乡地形图测绘测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503379914753', '2016ZD05-1', '大渡河长河坝水电站野坝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503413469186', '201602033', '四川省黑水河毛尔盖水电站麻窝乡', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503447023618', '201602034', '四川省德昌马鞍山、茨达、腊八山一期3风电场放大地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503480578050', '201602035', '孟底沟坐标转换点成果表.xls', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503514132481', '201602036', '四川省大渡河瀑布沟水电站黑马', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503547686914', '201602037', '大渡河硬梁包水电站二期输电线路开关站地形图(201511)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503581241346', '201602038', '脚木足流域鱼类增殖放流站地形地类图(201512)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503614795777', '201602039', '四川省大渡河硬梁包水电站建设管理营地地形图及沟道断面测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503648350209', '201602040', '四川省雅砻江老沟水库跨沟引水工程施工测量控制网土建及首次观测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503681904641', '201602041', '四川省雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503715459073', '201602042', '四川省云南省金沙江溪洛渡水电站天星坝水库界桩测设', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503744819201', '201602043', '四川省大渡河大岗山水电站正倒垂观测装置安装放线测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503778373633', '201602044', '工程地质图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503811928065', '201602045', '水利水电测绘信息网第一、六片学术交流会科技论文集（2016）.pdf', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503845482498', '201602046', '四川省大渡河瀑布沟水电站黑马料场土地复垦1∶1000地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503879036930', '2016K21-1', '四川省雅砻江木里河固增水电站4号支洞口上游内侧1∶1000地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503912591361', '201602048', '西藏雅鲁藏布江玉松补充加深多雄二级厂区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503946145794', '201602049', '金沙江溪洛渡水电站库区移民工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881503979700225', '2016ZD07-1', '四川省云南省金沙江溪洛渡水电站对坪新营沟防护工程1∶500地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504013254658', '201602051', '大渡河硬梁包水电站支洞进口', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504042614786', '201602052', '四川能源职业学院', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504076169218', '2016K07-1', '利比里亚圣约翰河St John Falls 水电站地形图、断面及地质点测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504113917954', '2016K07-2', '利比里亚全国水电规划测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504147472385', '2015W07-1', '四川省大渡河大岗山水电站河道疏浚断面测量测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504181026817', '201602056', '四川省大渡河绰斯甲河绰斯甲水电站施工场地布置1∶2000地形图补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504214581249', '201602057', '四川省盐源县白乌风电场和长坪子风电场1∶2000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504248135681', '201602058', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504277495809', '2016K11-7', '西藏自治区雅鲁藏布江林芝水电站丹娘沟、康巴沟、吞白沟', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504311050241', '201602060', '雅鲁藏布江视频制作、影像拼接工作量 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504348798977', '201602061', '四川省黑水河毛尔盖水电站泽盖移民址地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504378159106', '201603062', '四川省德昌县山地风电场 马鞍山、茨达、腊八山一期风电场 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504445267970', '201603064', '黑水河毛尔盖水电站库容测量复查', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504478822402', '2016K25-1', '江西抚州市抚河流域水生态保护及综合治理项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504512376833', '201603066', '大渡河硬梁包水电站调压井施工支洞进口段地形图(201606)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504545931265', '201603067', '四川省雅砻江孟底沟水电站场地及枢纽区1∶1000,1∶500地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504579485698', '201603068', '新疆托什干河亚曼苏水电站引水渠道1∶2000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504613040130', '201603069', '四川省西昌市三河一库水生态规划项目1∶500断面测量测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504646594561', '201603070', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504675954689', '201603071', '四川省金沙江银江水电站施工测量控制网建网及首次观测成果资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504705314817', '2016K28-1', '大渡河大岗山水电站水库区郑家坪变形体水下地形图测绘报告及地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504738869249', '2016K11-1.2.3.4', '1.2016K11-1、2、3、4、西藏自治区雅鲁藏布江', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504772423682', '2016K18-1', '大渡河硬梁包水电站1#～3#、5#～7#支洞', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504805978113', '2016K29-1', '西藏雅鲁藏布江加查水电站坝址区1∶1000三维地形面制作', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504839532546', '2016K27-1', '大渡河双江口水电站坝址区1∶2000三维地形面制作', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504873086977', '2016K25-2', '江西省抚州市抚河流域2016~2017年生态保护及综合治理项目初期应急勘测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504906641409', '201603078', '雅砻江楞古水电站施工总布置图-2000国家坐标系', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504940195841', '201603079', '四川省金沙江溪洛渡水电站葫芦坪', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881504973750273', '201606080', '四川省大渡河硬梁包水电站乌支索村垫高防护工程1∶500地形图补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505007304705', '201603081', '大渡河绰斯甲河绰斯甲水电站施工场地布置地形图补测(201606)1︰2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505040859138', '201603082', '四川省大渡河大岗山水电站临时用地复垦项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505074413569', '2016K24-1', '四川省雅砻江流域孟底沟水电站坝区、施工区1∶500、1∶1000三维地形曲面制作', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505107968002', '201603084', '四川省大唐风电场地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505141522434', '201603085', '雅砻江锦屏一级水电站坝区正射影像与数字高程模型1∶1000 DEM DOM', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505175076866', '201603086', '雅鲁藏布江下游规划钻孔收孔点转换成米林2000坐标系.xls', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505208631298', '201603087', '大渡河硬梁包水电站建设管理营地地形图(201604)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505242185730', '201603088', '大渡河瀑布沟水电站甘洛县耳足安置点供水工程地形地类图(201509)1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505275740162', '201603089', '四川省广元官帽山、黄蛟山风电场和杨家岩风电场放大图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505309294593', '201603090', '雅砻江流域GPS基准网布设', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505338654722', '201603091', '雅鲁藏布江下游多雄河玉松——背崩电子沙盘视频.rmvb', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505372209154', '201603092', '西藏定日风电场聂拉木风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505405763586', '201603093', '四川省盐边光伏电站放大地形图（201604）1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505439318017', '201603094', '西藏阿里象泉河阿青水电站进场公路放大地形图（201605）1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505472872450', '201603095', '马其顿Crna r.（切普瑞-盖里斯特）水电站放大地形图（201604）1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505506426881', '201603096', '老挝南碧水电站1、2、3期地形图（201604）1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505539981313', '201603097', '利比里亚 St  John Falls 水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505573535745', '201603098', '金沙江溪洛渡水电站新场沟放大地形图（201612）1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505607090178', '201603099', '重庆市洪崖洞旅游客运码头工程项目地形图及控制测量成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505640644610', '2016G03-1', '四川省雅砻江两河口水电站扎拖乡1∶500地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505674199041', '2016X02-1', '四川省金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505707753473', '201603102', '四川省大渡河双江口水电站供水工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505741307906', '201604103', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505774862338', '201604104', '雅鲁藏布江干流', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505812611074', '201604105', '西藏雅鲁藏布江米林农场地形图1∶5000转坐标', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505846165506', '201604106', '大渡河双江口水电站库区G317线复建公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505879719937', '201604107', '雅鲁藏布江西莫河规划阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505913274369', '201604108', '雅砻江孟底沟水电站张牙沟左岸山脊施工场地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505946828802', '201604109', '四川省普格大唐风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881505980383234', '201604110', '雅砻江上游乐安水电站坝址地形地类图2000坐标系', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506013937665', '201604111', '施工总布置图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506047492097', '201604112', '会议纪要', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506081046529', '201604113', '雅砻江牙根二级公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506114600961', '201604114', '雅砻江桐子林二滩官地锦屏2000转换54公式  ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506148155393', '201604115', '雅砻江二滩水电站库区泥沙淤积断面成果表扫描', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506181709826', '201604116', '新龙县污水口测量201312', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506215264258', '201604117', '理塘县曲如沟复建道路带状放大地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506248818689', '201604118', '雅砻江锦屏一级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506282373121', '201604119', '雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506315927554', '201604120', '安哥拉拉乌卡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506345287681', '201604121', '四川省西昌市水生态规划项目(东河)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506378842113', '201604122', '1.金沙江溪洛渡水电站库区新增影响区滑坡、云南库区新增影响区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506412396546', '201604123', '雅砻江两河口水电站红顶亚卓', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506445950977', '201604124', '雅鲁藏布江玉松补充加深项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506479505409', '201604125', '西藏雅鲁藏布江林芝玉松补充加深', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506517254145', '201604126', '四川省西藏自治区金沙江上游波罗水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506550808577', '201604127', '金沙江溪洛渡水电站界桩', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506584363010', '201604128', '大渡河硬梁包水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506617917441', '201604129', '大渡河双江口水电站可尔因沟地形图（201512）1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506651471873', '201604130', '金沙江溪洛渡水电站云南库区烂田坝塌岸影响区处理工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506685026305', '201604131', '西藏雅鲁藏布江玉松补充加深', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506718580738', '201604132', '雅砻江锦屏一级水电站坝区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506752135169', '201604133', '金沙江溪洛渡水电站库区移民规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506785689602', '2016G05-1', '四川省大渡河硬梁包水电站磨子沟及调压井交通公路测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506819244033', '2016G06-1', '四川省大渡河双江口水电站库区G317线复建公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506852798466', '2016K10-1', '西藏自治区雅鲁藏布江西莫河规划阶段地形图及断面测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506882158593', '2016K11-6', '西藏自治区雅鲁藏布江玉松补充加深研究', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506919907329', '2016K13-3', '四川省西昌市水生态规划项目地形地类图测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506949267457', '201701006', '1.雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881506982821889', '2016QT02-1', '四川省广元市剑阁县普安镇市政基础设施一期(PPP)项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507016376321', '2016W05-1', '四川省大渡河大岗山水电站临时用地复垦项目1∶500地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507049930754', '2016K37-1', '四川省西藏自治区金沙江叶巴滩坝址区、尾水出口区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507083485185', '2017K03-1', '西藏自治区雅鲁藏布江下游河段水电规划扎曲至解放桥河段DEM、DOM制作', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507117039617', '2016ZD09-1', '四川省雅砻江两河口水电站红顶、亚卓', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507150594049', '2017W01-1', '四川省大渡河大岗山水电站下游河道水下地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507184148481', '201701013', '四川能源职业学院拟选校址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507217702913', '201701014', '数码相机检校', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507251257345', '201701015', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507284811778', '201701016', '孟底沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507318366209', '201701017', '坐标系转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507351920642', '201701018', '西藏雅鲁藏布江林芝水电站进水口地形地类图(201704)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507385475073', '201701019', '四川省西昌市海河流域水环境综合整治项目（ 西昌市海河流域水环境综合整治项目）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507419029505', '201701020', '江西省抚州市抚河流域2016～2017年生态保护及综合治理', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507452583937', '201701021', '雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507486138370', '201701022', '四川省西昌市水生态规划项目东河拦挡坝地形地类图(201704)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507519692802', '201701023', '白水江多诺水电站库区地形图(201309)1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507553247233', '201701024', '大渡河双江口水电站移民安置点1∶500 1∶2000地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507586801665', '201701025', '大渡河双江口水电站施工测量控制网2017年复测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507620356097', '201701026', '大渡河双江口水电站足木足河S220省道公路地形图(201703)1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507653910530', '201702027', '大渡河双江口水电站松岗植物园', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507687464961', '201702028', '老挝南普水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507721019394', '2017W03-1', '西藏阿里地区象泉河阿青水电站施工测量控制网设计、建网及首期观测技术服务', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507754573825', '201702030', '西藏林芝水电站转坐标', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507788128258', '201702031', '坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507821682689', '201702032', '生态红线坐标转换 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507855237121', '201702033', '孟加拉流域综合治理工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507888791553', '201702034', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507922345985', '201702035', '国际健康谷起步区地形图测绘技术服务项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507955900417', '201702036', '四川省雅砻江两河口水电站红顶乡、亚卓、瓦多、比贡寺', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881507989454849', '201702037', '四川省岷江渔子溪映秀湾水电站、渔子溪水电站、耿达水电站高程系统联测成果报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508023009282', '201702038', '双江口水电站工程枢纽区征地红线测设及该区域实物指标调查配合', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508056563714', '2017K16-1', '江西抚河生态保护及综合治理招标、技施阶段补充测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508094312449', '201702040', '金口河项目资料和发票签收单.pdf', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508127866881', '201702041', '雅砻江两河口水电站坝址区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508161421314', '201702042', '四川省马边县芦蒿溪水库可行性研究阶段灌区及库区地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508199170050', '201702043', '.雅砻江木里河卡基娃水电站供水', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508228530177', '201702044', '金沙江叶巴滩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508262084610', '201702045', '四川省甘孜州新龙（50MWp）光伏', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508299833346', '201702046', '雅砻江桐子林水电站大坝外部变形和边坡滑坡监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508333387778', '201702047', '雅砻江二滩水电站大坝外部变形观测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508366942210', '201702048', '涪江双江航电工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508400496642', '201702049', '西藏多雄河玉松、林芝厂区勘探放样复核报告.pdf', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508438245378', '201702050', '重庆市洪崖洞旅游客运码头工程项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508471799809', '201703051', '云南省金沙江溪洛渡天星坝水库左干渠地形图及地类图测绘测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508505354241', '201703052', '西藏自治区雅鲁藏布江米林水库工程拉丁、康扎及大渡卡料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508543102978', '201703053', '西藏自治区雅鲁藏布江林芝水电站进水口1∶500地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508576657410', '201703054', '西藏自治区雅鲁藏布江玉松水库电站闸下河段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508614406145', '201703055', '四川省自贡市水环境治理规划阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508647960578', '201703056', '国网羊湖发电公司第六期压力钢管永久变形监测网校核（2017年度）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508681515009', '2017K23-1', '四川省白水江多诺水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508715069441', '201703058', '四川省西昌市东西海三河水环境综合整治工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508752818177', '201703059', '四川省大渡河双江口水电站太阳河、业隆-大石凼、红旗桥-大西村公路地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508786372610', '2017K073-1', '四川省西昌市水环境综合整治工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508824121346', '201703061', '四川省大渡河双江口水电站移民安置点1∶500、1∶2000地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508857675778', '201703062', '1.四川省大渡河双江口水电站足木足河S220省道公路', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508891230209', '2017K26-1', '西藏狮泉河光水互补地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508928978945', '201704065', '邛崃泉水湖水环境综合项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508962533377', '201704066', '金沙江溪洛渡水电站金阳公路测量(葫芦坪)地形地类图(201708)1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881508996087810', '201704067', '四川省大渡河长河坝水电站汤坝土料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509029642242', '2017K30-1', '成都市府河公园及水岸宜居工程可研阶段测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509063196674', '2017W09-1', '大渡河猴子岩水电站面板堆石坝坝后水下1∶500地形图及横断面测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509096751106', '201704070', '安居区城市地下管线普查及综合管网信息系统建设', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509134499842', '201704071', '金沙江溪洛渡水电站库区牛栏河影响区地形地类图(201708)1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509172248578', '201704072', '四川省大渡河大岗山水电站石棉县田湾乡安置点', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509201608705', '201704073', '雅尼国家湿地公园五区地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509226774529', '201704074', '九寨沟地震灾后恢复重建', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509251940354', '201704075', '大疆数码相机检校报告20171121.pdf', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509281300481', '2017ZD10-1', '四川省大渡河瀑布沟水电站消落区景观坝址1∶1000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509302272001', '201704077', '四川省成都市天府新区白沙水库可研阶段1∶500地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509327437825', '201704078', '成都院十二五发展规划汇总——报集团公司（定稿）.docx', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509352603649', '201704079', '雅砻江二滩水电站大坝外部变形观测网第152期', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509377769474', '201704080', '.四川省雅砻江桐子林大坝外部变形监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509402935298', '201704081', '1.四川省成都市天府新区成都科学城生态水环境工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509428101121', '201704082', '四川省越西县书古水库工程地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509453266945', '201704083', '四川省西藏自治区金沙江上游波罗水电站花岗岩料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509478432769', '201704084', '江西省抚河生态保护及综合治理招标、技施阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509503598593', '2017W08-1', ' 四川省稻城亚丁机场净空保护区图及跑道数据测绘-', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509528764418', '201704086', '四川省雅砻江桐子林水电站大坝外部变形和边坡滑坡月度监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509553930242', '201704087', '四川省大渡河双江口水电站左岸尾水至泄洪洞系统出口', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509579096065', '201704088', '西藏自治区雅鲁藏布江玉松水库电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509604261890', '201704089', '四川省木里河固增水电站施工测量控制网2017年度复测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509629427713', '201704090', '四川省西昌市安宁河谷生态长廊试验段规划1：500横断面测量测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509654593537', '201704091', '四川省大渡河双江口水电站施工测量控制网2017年第二次复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509679759362', '2017K08-1', '四川省西昌市东河水库工程建设征地界桩测设资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509704925186', '2017K28-1', '四川省西藏自治区金沙江上游波罗水电站偶曲河、藏曲河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509730091009', '201704094', '四川省雅砻江两河口水电站地下厂房基本测量控制网系统建立', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509772034049', '201704095', '雅鲁藏布江干流玉松闸址到玉松三级厂址段两岸水边线', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509809782786', '201704096', '大渡河石棉县田湾乡集镇安置点地形地类图（201712）1：500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509843337217', '201704097', '黑水河毛尔盖水电站双溜索乡移民安置点地形地类图(201604)1：1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509876891650', '201704098', '1.四川省自贡市水环境（东部新城水系连通）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509914640385', '201704099', '坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509948194818', '2017W07-1', '老挝万象至万荣高速公路项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881509981749249', '2016K05-1', '大渡河双江口水电站金川县当卡土料场、可尔因料场1：1000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510015303682', '201801002', '老挝Nam Bi 梯级水电站工程区1：1000、1：5000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510048858114', '2016XNY01-1', '四川省西昌市佑君风电场（黄联关风电场补测）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510082412546', '2017G03-1', '四川省白水江多诺水电站库区公路1：2000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510120161282', '2017K19-1', '四川省马边县芦蒿溪水库可行性研究阶段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510153715714', '2017K25-1补', '四川省成都市天府新区白沙水库工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510187270146', '2017W06-1', '康定机场净空保护区图及跑道数据测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510216630273', '2017W11-1', '云南省临沧市临清高速公路施工测量控制网建设', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510254379010', '2017W13-1', '重庆市奉节至建始高速公路初步勘察设计控制测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510287933441', '2017ZCB03-1', '四川省白水江多诺水电站放空洞水下地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510321487873', '201801011', '广元鼓楼地下商业街测量资料201803', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510359236610', '201801012', '四川省乐山市金口河大瓦山旅游区地形图测绘2017', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510392791041', '201801013', '四川省德昌县马鞍山、茨达、腊巴山一期风电场1：2000地形图测绘补测GPS点成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510426345474', '201801014', '四川省成都市天府新区白沙水库项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510459899905', '201801015', '大渡河猴子岩水电站施工控制网监测共4期（201604、201610、201705、201802）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510493454337', '201801016', '四川省雅砻江二滩水电站金龙山霸王山谷坡变形监测2013年年报', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510527008769', '201801017', '四川省遂宁市软件服务外包产业园11#楼沉降测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510560563201', '201801018', '雅砻江二滩水电站大坝外部变形观测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510594117633', '201801019', '四川省雅砻江桐子林水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510627672065', '201801020', '雅砻江桐子林水电站2018年水库泥沙断面测量报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510661226497', '201801021', '2018程序文件、作业文件、管理手册、受控技术标准', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510698975233', '201801022', '2018年优秀测绘工程奖申报材料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510732529665', '201801023', '20141124金沙江叶巴滩水电站建设征地界桩—江达县、贡觉县外业验收报告.pdf', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510766084098', '201801024', '2016-2018年四川省优秀测绘地理信息工程奖申报材料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510799638529', '2017K28-1', '金沙江上游波罗水电站施工总布置用地偶曲河、藏曲河地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510833192962', '201801026', '四川省康定县金汤河金康水电站施工测量控制网2003年成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510866747394', '201801027', '关于展开《精密工程测量通用规范》编研调研工作的函', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510900301826', '2017K04-1', '四川省西昌市18条山溪河流综合整治项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510933856258', '201801029', '金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881510971604993', '2017K05-1', '孟加拉全国流域综合治理规划项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511000965121', '201801031', '四川省自贡水环境(东部新城水系连通)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511034519554', '2018Cck01', '金沙江上游波罗水电站库区金沙江干流库尾1：2000地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511068073985', '2018Cck02', '四川省大渡河猴子岩水电站库区开顶滑坡地形图测绘    ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511105822721', '2018Cck03', '尼泊尔上马相迪河上马相迪-1水电站可研阶段测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511139377153', '2018Cck05', '四川省田湾河仁宗海地形图及廊道内侧放点测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511177125890', '2018Cck07', '四川省成都市龙泉驿区备用水源建设项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511210680321', '2018Cck08', '四川省马边县芦稿溪水库可行性研究阶段兴隆水库地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511244234753', '2018Cck09', '四川省大渡河双江口水电站阿斯布土料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511277789185', '2018Cck10', '西藏自治区拉萨市拉萨河6#闸', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511307149313', '2018Cck13', '西昌市东、西、海“三河”水环境综合整治项目施工控制点测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511340703745', '2018Cck14', '白水江多诺水电站“8.8”地震灾后重建项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511374258178', '2018Cck16', '金沙江上游叶巴滩水电站库区白格滑坡地形图应急测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511407812610', '2018cjc01', '大渡河双江口水电站库区G317国道控制测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511441367042', '2018cjc02', '金沙江溪洛渡水电站库区公路地形图补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511474921473', '2018cjc03', '金沙江溪洛渡水电站库区公路（火石子）控制测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511508475906', '2018Cny01', '四川省凉山州盐源县光伏扶贫电站可研阶段棉桠、卫城光伏电站1：500地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511542030338', '2018Cny02', '贵州省假果山风电场地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511575584770', '2018Cqt01', '大渡河大岗山至河口段梯级电站生态调度研究局部河段水下地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511609139201', '2018Cqt02', '四川省马尔康垃圾填埋场综合整治工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511646887937', '2018Csh02', '四川省成都市天府新区白沙水库1：500地形图补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511680442370', '2018Cym01', '四川省大渡河双江口水电站国家级文物甲扎尔甲壁画选址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511713996802', '2018Cym04', '大渡河长河坝水电站江咀左岸500地形图测绘、野坝、磨子沟 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511747551234', '2018Cym05', '四川省雅砻江两河口水电库区普巴绒特大桥1：500地形测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511781105666', '2018Cym06', '云南省金沙江溪洛渡水电站库区大兴集镇外部供水变更项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511814660098', '2018Cym07', '大渡河黄金坪水电站叫吉沟取水口、水厂、线路公路地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511848214529', '2018Cym09', '大渡河双江口水电站硅厂地形地类图测绘及嘉绒、大石凼断面测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511885963265', '2018Cym11', '金沙江溪洛渡水电站雷波县卡哈洛集镇移民垃圾填埋场新址1：500地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511919517698', '2018Cym12', '四川省雅砻江两河口水电站瓦多集镇垃圾填埋场1：500地形地类图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511953072130', '2018Cym13', '大渡河泸定水电站海子村、五里沟复垦区地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881511986626562', '2018Cym14', '金沙江溪洛渡水电站库区牛白路、上田坝及德昌移民安置点地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512020180994', '2018Cym15', '金沙江溪洛渡水电站天星坝水库右干渠地形图补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512053735425', '2018Cym16', '四川省雅砻江两河口水电站红顶集镇引水线路及取水口地形地类图、阿宗地形地类图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512087289858', '2018Cym17', '四川省岳池县白庙镇农房改造项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512120844290', '2018Cym18', '大渡河黄金坪水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512154398721', '2018W01', '四川省岷江虎渡溪航电枢纽工程施工测量控制网建设', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512187953153', '2018W05', '四川省大渡河大岗山水电站库周交通新华村连接公路及雨洒河水电站复建公路工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512221507585', '2018W07', '西藏察隅县波罗水电站水工建筑物安全监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512255062017', '2018W08', '金堂县广兴镇旅游景区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512288616449', '2018CYM22', '雅砻江两河口水电站库区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512317976578', '2018W19', '大渡河大峡谷景区1：10000地形图编制', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512355725314', '201803071', '20181102白沙水库改名称后交业主及12月检查说明', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512385085441', '201803072', '20181120扫描成果表 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512418639874', '201803073', '金川归档资料20190122杨文樵归档', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512452194306', '201803074', '四川省岷江太平驿电站大坝左、右岸高边坡安全监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512485748738', '201803075', '四川省雅砻江两河口水电站地下厂房基本测量控制网2018年复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512519303169', '201803076', '二滩147期检验报告（四川省测绘产品质量监督检验局（201901）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512552857601', '201803077', '四川省绵竹市智慧旅游基础数据采集项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512590606338', '2018Cck11', '天府新区大林湖水库鹿溪河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512619966465', '201803079', '金沙江溪洛渡水电站库区影响区调查图斑', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512653520898', '2018Cym25', '2018年配合移民专业现场测量及内业坐标转换(陈家碉征地配合)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512687075329', '2018Cym19', '云南省金沙江溪洛渡水电站天星坝水库', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512724824065', '2018Cqt03', '重庆合川利泽场地项目地形图测绘--测绘报告及地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512754184193', '2018W25', '雅砻江桐子林水电站水库泥沙断面测量2018年度', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512779350017', '201803084', '四川省西昌市田园综合体', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512804515842', '201803085', '金沙江溪洛渡水电站雷波县上田坝外部供水恢复变更项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512821293057', '201803086', '金沙江溪洛渡水电站库区二台坪子移民安置点地形图(201812)1：1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512838070273', '201803087', '江西省抚州市抚河流域水生态保护及综合治理项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512850653186', '201803088', '涪江双江航电工程水库区地形图(201708)1：2000 补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512867430401', '201803089', '大渡河双江口水电站国家级文物甲扎尔甲壁画选址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512880013314', '201803090', '成都天府国际空港新城区域地形图2018.10.18.dwg', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512900984834', '201803091', '四川省自贡水环境治理规划阶段旭水河支流地形图（201802）1：10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512913567745', '2018W14', 'G7611线昭通（川滇界）至西昌段高速公路A2标段控制测量项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512930344961', '201804001', '2018坐标转换资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512947122177', '201804002', '四川省西昌市18条山溪河流综合整治项目地形图正式1：1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512963899393', '201804003', '大渡河硬梁包水电站扯索坝复垦区地形图（201807）1：500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881512984870914', '201804004', '大渡河长河坝水电站江咀左岸地形图（201802）1：500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513018425346', '201804005', '1.雅尼公园内的陆地    2.玉松拼图    3.茅香沟水下 成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513051979778', '201804006', '老挝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513085534210', '201804007', '四川联合光伏炉霍35MW光伏电站地形地类图(201711)1：2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513123282946', '201804008', '20170309四川省西昌市麻柳沟综合治理带状地形图(201703)1：1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513156837377', '201804009', '转坐标', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513186197505', '201804010', '林芝施工测量控制网技术设计书', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513219751937', '201804011', '四川省西昌市水环境综合整治工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513253306370', '201804012', '四川省西昌市水环境', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513291055106', '201804013', '拼图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513324609537', '201804014', '老挝南普，色拉龙', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513358163969', '201901001', '雅砻江梯级转换成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513391718402', '201901002', '太平驿电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513421078530', '201901003', '1.德昌县控制点成果    2.泸县控制点成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513454632961', '201901004', '金川施工测量控制网技术总结报告2008', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513492381697', '2018W16', '成都市城市东西轴线（绕城以东段）项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513525936129', '2018W21', '映秀湾电厂三站大坝及边坡监测系统维修技术服务-测绘报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513559490561', '201901021', '2019年内外审正式成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513593044994', '201901022', '2019257溪洛渡资料最新修改-罗业华交  2014年 溪洛渡库区滑坡配合 修改', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513626599426', '201901023', '四川省遂宁市河东软件服务外包产业园11#楼沉降测量20190613', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513660153858', '201901024', '天星坝替换资料及坐标转换资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513693708290', '201901032', '岷江太平驿水电站大坝左、右岸高边坡安全监测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513727262722', '201901033', '雅砻江二滩水电站水库泥沙断面测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513760817153', '201901034', '成都智千行科技咨询有限公司.pdf', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513798565890', '201901035', '白玉县拉龙措创4A景区必建测绘项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513832120322', '201901036', '江达县两区划定资料打印胶装.zip', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513865674753', '201901037', '白玉、巴塘扫描件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513899229185', '201902041', '大渡河双江口水电站外观变形测量控制网报告2019', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513932783618', '2018W23', '2018年零星项目-无人机机载激光数据分类及地形图编绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513966338050', '201902060', '金沙江雅砻江断面正式成果（201907）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881513999892481', '2018Cym24', '大渡河大岗山水电站石棉县田湾乡集镇地形图（201901）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514033446913', '201902066', '两河口水电站铜街子化粪池、控制点成果；天府广场平面图成果等', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514067001346', '201903079', '雅砻江两河口水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514100555778', '201903081', '2019年坐标转换', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514134110210', '201904091', '官地水电站外部变形监测2019年度', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514167664641', '201904092', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514201219073', '201904093', '太平驿电站大坝左、右岸高边坡安全监测资料告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514234773506', '201904094', '2019坐标转换资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514268327938', '201905101', '【2019.12.15绵竹智慧旅游基础数据采集项目地形图】', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514364796929', '201905102', '金沙江波罗水电站堰塞体', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514603872257', '201906106', '金沙江叶巴滩水电站坝区潜在不稳定体治理', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514633232386', '201906107', '2019-溪洛渡水电站进水口及尾水河道地形测量成果报告zg', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514666786818', '201906108', '200901雅砻江楞古水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514700341249', '201906110', '雅砻江两河口水电站两河口石料场至三汇桥地形图(201904)1：500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514733895682', '202001001', 'NT-03号停车场、两拆一增（兴城公司项目）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514767450114', '202001003', '汉阳电航枢纽平面总布置图CGCS2000.（坐标转换）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514801004546', '202001004', '虎渡溪（坐标转换）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514838753281', '202001005', '德格县4处地质灾害应急抢险救灾治理工程测绘报告及图纸', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514872307714', '202001006', '不动产测量2.8户', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514905862145', '202001007', '2020中国地理信息产业优秀工程奖申报贵州省乌当（羊昌）至平塘高速公路测绘工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514939416577', '202001008', '保税港消火栓成果、江北嘴成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881514972971010', '202001009', '市勘院项目（龙兴、鱼复）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515006525442', '202001010', '《桐子林水电站大坝运行总结报告》补充完善意见及分工表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515040079873', '202001011', '大庆石油管理局职工家属区供热系统分离移交乘银供热区域一区块分支网维修改造工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515073634305', '202001012', '巴南区一品街道金田村1：500地形图测绘工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515107188737', '202001013', '北京ADS需要签章文档北京市2019年航空摄影与数据处理之彩色数字正射影像制作（A区）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515140743169', '202001014', '1.成都市大观片区蝶花街道路工程测绘数据   2.成都市锦江区洪柳东小学地下管线探测成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515170103297', '202001015', '服务认证审查报告（售后服务）20200115扫描件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515203657730', '202001016', '测绘项目检验报告  （四川省测绘产品质量监督检验站）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515237212162', '202001017', '四川省石棉县大熊猫科普公园1：500地形图测绘服务项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515270766593', '202001018', '青川县重点区域自然资源权属调查（大熊猫国家公园）项目权属界线扫描件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515304321026', '202001019', '数码相机检校报告(大疆精灵4数码相机（机身编号30038、30317、31321)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515333681153', '202001020', '成都市郫都区国土资源局郫都区第三次全国国土调查（包二）-阶段测量报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515367235586', '202001021', '无人机倾斜摄影三维地形面模型成果应用技术业主证明20200601', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515400790017', '202001022', '四川省大渡河绰斯甲水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515438538754', '202001023', '三体系认证证书扫描2020', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515472093185', '202001024', '2020103东河水库工程坝区地形图1：1000（CGCS2000）（坐标转换）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515505647617', '202001025', '54-2000（高斯坐标）二维坐标转换成果   南丰坐标转换存于2017039内', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515539202050', '202001026', '数码相机检校报告(OV2HS6G - RA30021)  数码相机检校报告(OV2HS6G - RA30221)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515572756481', '202001027', '关于中大型水电工程坐标系设置及使用的说明', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515602116609', '202001028', '信息安全管理体系认证审核报告及证书  2020扫描件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515635671041', '202001029', '桐子壕航电开发有限公司上游束水墙铺盖监测工程成果报告2020', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515669225473', '202001030', '汶川县城市棚户区综合改造及配套基础设施建设项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515702779905', '202001031', '大庆石油管理局职工家属区供热系统分离移交乘银供热区域一区块分支网维修改造工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515736334337', '202001032', '双江口水电站控制测量系统说明    孟底沟水电站变电站控制点坐标转换成果说明', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515769888770', '202001033', '峨眉山市农村土地承包经营权确权登记颁证第三方质检', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515803443201', '202001034', '转换成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515836997633', '202003097', '1.华测风电塔安全监控方案   2.模板平罗高速公路定测外业验收咨询报告---正式稿8.26', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515870552066', '202003098', '成都医投华西国际肿瘤治疗中心（重离子质子）项目一期', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515904106498', '202005111', '大渡河长河坝水电站监测控制网复测资料（2018年10月）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515937660929', '202101001', '2017-昭苏县2017年度农村土地承包经营权确权登记颁证项目质检站验收报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881515971215362', '202101002', '成都高新技术产业开发区发展改革和规划管理局成都高新区地下管线普查', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516004769793', '202101003', '31121工程DQ河河道测量服务', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516034129922', '202101004', '高海拔大高差北斗变形监测科研项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516067684353', '202101005', '洪柳西公服一、二项目地下管线探测成果图及报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516105433090', '202101006', '南网数研院航飞影像服务建设项目粤北、粤西标包-验收证书', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516138987521', '202101007', '四川省新津县第三次全国国土调查成果（监理）2020', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516172541954', '202101008', '邛崃地下管网文本资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516206096386', '202101009', '渝湘高速公路地形图咨询报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516239650818', '202101010', '冕宁县地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516273205250', '202101011', '重庆市测绘成果目录汇交等', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516306759682', '202101012', '数据入库预检意见等', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516340314114', '202101013', '1.2021年汛期安全生产会会议纪要   2.关于中大型水电工程坐标系设置及使用的说明', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516378062850', '202101014', '武侯区管线普查报告PDF及整改资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516407422977', '202101015', '直孔水电站监测控制网复测技术设计文件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516440977410', '202101016', '天星坝水库控制网设计、建网及首期观测埋点照片', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516508086274', '202101018', '记录等', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516541640705', '202101019', '武汉大学学历证明扫描件20211011谭君等11人', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516575195138', '202101020', '甘孜藏族自治州河湖划界项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516642304002', '202101022', '重庆至黔江铁路站前6标精测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516675858434', '202101023', '2021报奖资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516713607170', '202104073', '大竹县城区地下给排水图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516742967297', '202104074', '兴城集团两拆一增-归档成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516776521730', '202104075', '直孔电站库区泥沙淤积测量设计文件', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516810076162', '202104078', '西藏老虎嘴监测控制网重建恢复及工作基点校核专题设计', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516843630594', '202104080', '441823阳山县441802清城区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516877185025', '202104081', '五大经济区旅游产品发展方向及旅游资源开发条件评价研究(成果稿)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516910739458', '202201003', '广东省第三次全国国土调查中山市监理', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516944293890', '202201005', '山东省烟台市栖霞市控制规划区域1：2000地形图测绘项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881516977848321', '202201009', '大型水电工程水平位移监测控制网稳定性已知系统分析法研究_', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517011402754', '202201012', '2022三体系认证内外审资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517049151490', '202201015', '汶川县城市棚户区综合改造及配套基础设施建设项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517082705922', '202201016', '一品金田村', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517116260354', '202201017', '成都市企业技术中心申报书-中水成勘院(1)', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517149814785', '202201020', '天星坝GPS点成果表20220620陈洪归档', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517216923650', '202201024', '大疆数码相机参数标定报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517250478082', '202201025', '2022年四川省优秀工程奖申报', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517284032513', '202201026', '天府大道北延线资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517351141378', '202201028', '自贡市2022年第34批次建设用地 9-16、35批（8-25土地坐落加村集体）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517380501505', '202201029', '霍尔果斯公路测量项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517414055938', '202202049', '2022年四川省地理信息产业”十佳单位“现场考核答辩汇报材料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517481164802', '202202052', ' 仁怀市1：500 正射影像图及地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517514719234', '202202053', '敦化评审资料、孟底沟施控网评审、山东泰安二期抽蓄', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517548273665', '202202054', '凉山州2021年度国土变更调查', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517581828098', '202202055', '龙泉驿区1：500系列数字测绘产品生产与更新项目DLG成果监理资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517615382529', '202202056', '邛崃市地下管线普查成果更新探测服务项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517648936962', '202202057', '大连庄河海上风电项目扫海工程中间成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517686685697', '202202058', '邻水县重点区域自然资源统一确权登记项目数据库检验报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517716045825', '202203060', '李家岩水库工程施工测量控制', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517753794561', '202203067', '重庆至黔江六标第五次复测（2022上半年）20230202', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517816709122', '202203069', '彭州市1：500系列数字测绘产品生产服务项目（第4包）验收意见', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517850263553', '202203070', '金川220kv变电站勘测定界报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517883817986', '202203071', '2017年累距图 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648881517917372417', '202203073', '测绘地理信息成果质量检验报告-四川省雅砻江二滩电力生产项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1648889800975712257', '202201001', '天星坝', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945025836744705', '20228-2', '大竹县城区地下管网普查项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945025891270658', '20228-5', '彭州市规划和自然资源局彭州市1：500系列数字测绘产品生产服务项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945025908047873', '20228-12', '青海省海西蒙古族藏族自治州第三次全国国土调查', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945025924825090', '20228-26', '贵阳市自然资源确权', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945025945796609', '20228-28', '佛山市季华路西延线工程（南海丹灶段）项目测量工程地籍及房产测绘工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945025958379521', '20228-29', '三台县河道管理范围划定项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945025975156737', '20228-30', '祥云财富工业园区有色金属循环产业园（一期）工程规划路工程测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945025991933953', '20228-31', '广东省清远市清城区粮食生产功能区调整补划项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945026008711170', '20228-32', '国家地震烈度速报与预警工程1：500地形和用地红线图测绘项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945026025488386', '20228-33', '赣深1标建网复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945026042265602', '20228-34', '赣深1标建网复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945026059042817', '20228-35', '新建重庆至黔江铁路站前5标精测网第5次复测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945026075820034', '20228-37', '邻水县农村集体土地大比例尺图实测和确权登记发证项目（包二）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945026096791553', '20228-41', '甘孜州水旱灾害风险普查 ', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945026113568770', '201302031', '雅砻江牙根一级水电', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945029758418945', '2013YD-53-1', '四川省大渡河石棉县老鹰岩三级水电站1∶2000断面测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945029779390466', '2014K03-1', '四川省雅砻江上游新龙水电站下坝址至新龙县城1∶2000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945030211403778', '2014K07-01', '四川省雅砻江上游牙根二级水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031624884225', '201405137', '大渡河猴子岩水电站格宗乡危岩体激光扫描三维地形面1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031641661441', '201405138', '金沙江叶巴滩水电站坝区地形地类图（201110）1︰1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031658438658', '201405139', '金沙江叶巴滩水电站坝址区三维地形面1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031679410178', '201405140', '金沙江叶巴滩水电站尾水出口区及俄德西沟料场区', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031696187393', '201405141', '叶巴滩水电站降曲河～金沙江河口公路测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031712964609', '201406142', '西藏雅鲁藏布江玉松水库电站规划加深阶段库区补测', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031725547522', '201406143', '雅砻江二滩水电站大坝外部变形观测网2014', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031746519041', '201406144', '四川省乐山市乐北组合城市地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031763296258', '201406145', '四川省大渡河瀑布沟水电站移民安置场地工程', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031780073474', '201406146', '四川省德昌县安宁河谷德州风电场（德昌四期）和黄家坝风电场（德昌五期）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031796850689', '201406147', '四川省雅砻江两河口水电站移民安置点规划项目测量', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031809433601', '201406148', '四川省雅砻江上游新龙水电站庄果沟料场1∶1000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031826210817', '201406149', '大渡河瀑布沟水电站进场交通洞口地形图（201411）1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031842988033', '201406150', '长江宜宾至重庆河段水电规划项目支流地形图1∶10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031859765250', '201406151', '西藏自治区朋曲康工水电站库尾公路桥地形图(201410)1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031876542466', '201406152', '大渡河泸定水电站冷竹关村二组库岸防护工程地形地类图(201412)1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945031893319682', '201406153', '大渡河猴子岩水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945032379858945', '2014K04-03', '四川省雅砻江楞古水电站坝区1∶1000危岩体分布三维激光扫描', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945032392441858', '2014K17-4', '四川省金沙江叶巴滩水电站坝区、尾水出口、俄德西沟料场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945032409219073', '2014K22-1', '四川省雅砻江孟底沟水电站坝区危岩体分布', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945032425996289', '2014W10-1', '四川省云南省金沙水电站塘坝河生态环境修复工程1∶2000地形图测绘', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945032493105153', '2014XNY07-1', '四川省广元市凉水泉风电场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945032782512130', '2014K20-1', '四川省长江至宜宾河段水电规划项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1649945039052996609', '017W01-1', '四川省大渡河大岗山水电站下游河道水下地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1650334368212451330', '20228-1', '新建重庆至黔江铁路站前5标精测网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1650387258763378689', '20228-43', '10包核查结果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023245922305', '200301001', '雅砻江中游航测资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023262699522', '200301002', '雅砻江两河口水电站地形图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023283671041', '200301003', '白水江流域规划地形图1∶5000、纵横断面图、大比例尺地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023300448258', '200301004', '大渡河双江口水电站库区地类图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023321419777', '200301005', '金川水电站坝区放大地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023346585601', '200301006', '西藏拉萨河规划（布嘎/卡多/扎雪/直孔）坝区、库区、放大图及白水江图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023388528641', '200301007', '美姑河柳洪电站厂区地形图1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023409500161', '200301008', '雅砻江牙根水电站（库区1∶10000地形图/坝址区1∶2000地形图）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023447248897', '200301009', '杂谷脑河薛城、古城水电站工程区地形图1∶5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023480803330', '200301010', '雅砻江中游牙根/卡拉/杨房沟水电站坝区1∶2000地形', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023518552066', '200301011', '宝兴河民治水电站厂区/闸址区地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023552106497', '200301012', '杂谷脑河薛城、古城水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023589855233', '200301013', '雅砻江牙根水电站坝址区地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023623409665', '200301014', '杂谷脑河薛城水电站厂址区、古城水电站闸址区1∶500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023661158401', '200301015', '金沙江溪洛渡电站坝区地类图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023694712834', '200301016', '雅砻江中游河道平面图1∶50000、纵断面图、成果表', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023732461570', '200301017', '尼日河隧洞区1万图、大渡河（尼日河口－峨边县城）纵断面图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023770210305', '200301018', '金沙江溪洛渡水电站三坪营地地形图1∶500及控制成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023803764737', '200301019', '大渡河大岗山水电站牛牛坝电站坝牙根水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023837319170', '200301020', '杂谷脑河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023862484994', '200301023', '木里河沙湾水电站下厂址地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023879262210', '200301024', '木里河俄公堡电站厂址地形图1∶1000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023896039425', '200301025', '雅砻江（牙根水电站楞古水电站）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023917010945', '200301026', '大渡河猴子岩电站坝区地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023929593858', '200301027', '美姑河牛牛坝水电站库区地类图1∶5000/柳洪电站厂区地形图1∶500）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023946371074', '200301028', '大渡河流域规划孔玉水电站坝区地形图1∶2000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023963148289', '200301029', '雅砻江中游规划 蒙古山水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023975731202', '200302001', '大渡河沿河溪洛渡电站柳洪、木里、卧龙、溪洛渡、雅砻江中游规划、杂谷脑河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414023992508418', '200302002', '美姑河柳洪电站\\西藏直孔电站\\杂谷脑河薛城水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024005091329', '200302003', '干流足木足河划下尔呷坝址横断面\\薛城厂址古城坝址\\直孔水下', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024026062849', '200302004', '锦屏\\金沙江溪洛渡水电站坝区地形图\\康定\\柳洪', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024055422978', '200302005', '出居沟电站\\木里河俄公堡卡基娃坝址\\卡基娃沙湾\\立洲坝址\\阿布地', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024072200194', '200302006', '快乐沟溪洛渡两河口电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024088977410', '200302007', '溪洛渡水电站荣经移民', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024105754625', '200302008', '双江口\\薛古支沟\\卡拉水电站\\杨房沟水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024118337537', '200302009', '溪洛渡电站\\卧龙自然保护区\\雅砻江牙根水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024135114753', '200302010', '卧龙最后成果\\雅砻江中游规划\\茶布朗沟500\\固增引水5000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024147697665', '200302011', '木里5万矢量\\木里河固增1000\\木里河扫描影象\\沙湾10000', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024164474881', '200302012', '木里河固增水电站\\古城上下厂址\\牛牛坝库区\\薛城坝址', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024177057794', '200302013', '西藏羊湖水电站院科技大楼\\金沙江溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024189640705', '200302014', '大渡河流域', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024206417922', '200303001', '大渡河长河坝水电站杂谷脑河薛城、古城水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024223195137', '200303002', '雅砻江两河口水电站牙根水电站\\雅砻江中游规划', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024239972354', '200303003', '宝兴县东河民治水电站\\荣经移民\\雅两河口电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024256749569', '200303004', '大渡河双江口水电站溪洛渡水电站西藏直孔电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024269332481', '200303005', '溪洛渡水电站雅砻江两河口电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024286109698', '200303006', '康定木格措', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024298692610', '200303007', '雅砻江锦屏一级水电站杨房沟杂谷脑河薛城 古城水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024315469826', '200303008', '柳洪电站闸区地形图\\柳洪水电站2#支洞地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024328052738', '200303009', '柳洪水电站生活区地形图\\美姑河柳洪电站厂区地形图500', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024340635650', '200303010', '大渡河双江口水电站\\雅砻江中游规划沿河', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024357412865', '200303011', '大渡河沿河1万（63-189）\\雅砻江锦屏一级水电站大沱生活区地形图', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024369995778', '200303012', '大渡河瀑布沟水电站荣经县雅砻江两河口电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024386772994', '200303013', '大渡河流域', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024399355905', '200303014', '双江口地形地类图\\雅砻江牙根水电站库区地形图1万', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024416133121', '200303015', '大渡河长河坝水电站坝区地形图\\大渡河断面\\红叶渣场', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024428716033', '200303016', '双江口水电站溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024441298946', '200303017', '大渡河双江口水电站溪洛渡水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024458076162', '200303018', '狮子坪\\杂谷脑河薛城古城水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024474853378', '200303019', '锦屏\\薛城古城水电站\\西藏直孔电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024487436290', '200303020', '狮子坪\\溪洛渡\\薛古支沟地形图\\杂谷脑河古城水电站', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651414024504213506', '200303021', '大渡河热足水电站下尔呷', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651491619774136322', '20217-1', '马边县农村承包地确权第三方质检项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651491619916742657', '20217-2', '两江新区排水管网', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651491619975462913', '20217-3', '新建重庆至黔江铁路站前6标段', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651491620013211650', '20217-5', '苍溪县10条河河湖划界', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651491620050960385', '20217-6', '德昌县农村土地承包经营权确权项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651491620084514817', '20217-9', '锦江乱占耕地成果数据', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651491620118069250', '20217-10', '邛崃市地下管线普查成果更新探测服务项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651491620155817986', '20217-11', '深溪沟消力池及泄洪洞进出口水下检测及检查服务工作报告', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651491620189372417', '20217-12', '明县城中镇C标农村土地承包经营权确权登记颁证项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651491620222926849', '20217-13', '西藏冷达水电站1#工程建设区征地土地勘测定界', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651491620260675586', '20217-14', '三台县3个规划编制项目（岸线、水利空间、三台县“十四五”）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651491620298424322', '20217-18', '蒲江县城区19.37平方千米1：500数字线画图、数字正射影像图生产和更新项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651491620331978754', '20217-19', '四川省甘孜州九龙县三岩龙沟河湖管理范围划定项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1651491620365533186', '20217-20', '四川省甘孜州九龙县子耳河河段河流管理范围划定', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1654408468295843841', '20217-26', '四川省河湖管理范围划定简阳河道（简阳50平方公里及以上河湖划界项目）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1654408468413284354', '20217-28', '南部县2020年菜子河等15条河河湖划界项目（四川省河湖管理范围划定）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1654408468501364737', '20217-30', '海西蒙古族藏族自治州乌兰县第三次全国国土调查', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1654408468518141953', '20217-31', '邻水县农村土地承包经营权确权登记数据库成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1654408468543307777', '20217-33', '第三次全国国土调查4包、18包、23包', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1654408468564279298', '20217-34', '重筠高速公路项目的资料和德阳高速成果资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1654408468589445121', '20217-35', '广元市青川县、利州区、苍溪县河道管理范围划定', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1654408468614610946', '20217-39', '美姑农村土地确权', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1654408468639776770', '20217-40', '西藏（五张光盘）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1654408468664942593', '20217-41', '叙州区三调、 511504叙州区不动产登记存量数据库建设（林权档案电子化存量数据整合建库采购项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1654408468690108418', '20217-43', '阳山县“房地一体”农村不动产登记发证工作服务项目（片区四）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1654408468711079938', '20217-44', '成都高新西区控制点资料', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1654408468736245761', '20217-46', '成都市地下管线普查', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1656130457364594689', '20217-47', '三调成果（白龙镇、店子镇、鹤龄镇、剑门关镇、木马镇、江口镇、樵店镇、羊岭镇、杨村镇）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1656130457414926337', '20217-49', '重庆永川补勘补探项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1656130457431703554', '20217-50', '2021自贡水系连通勘界项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1656130457448480770', '20217-56', '513425会理县（三标）汇交数据库', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1656130457465257985', '20217-57', '513333色达县第三次全国国土调查成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1656130457482035202', '20217-59', '西昌市农村土地承包经营权确权登记颁证', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1656130457498812417', '20217-61', '昌县土地确定权发证数据库（第三包）', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1656130457519783937', '20217-62', '甘洛县房地一体项目二标段1210数据库成果', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1656130457540755458', '20217-64', '石人公园监测项目', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project` VALUES ('1656130457557532674', '20217-71', '红原县规模以下48条河划界', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);

-- ----------------------------
-- 24、cmc项目内容表
-- ----------------------------
drop table if exists `cmc_project_work`;
create table `cmc_project_work`  (
  `work_id`			bigint not null  auto_increment comment '工作内容id',
  `project_id`		char(19)		default null	comment '项目id',
  `content`			varchar(255)	default null	comment '工作内容',
  `scale`			varchar(15)		default null	comment '等级或比例尺',
  `unit`			varchar(10)		default null	comment '单位',
  `workload`		varchar(12)		default null	comment '工作量',
  `deadline`		date			default null	comment '要求完成时间',
  `finish_time`		date			default null	comment '实际完成时间',
  `remark`			varchar(255)	default null	comment '工作内容备注',
  primary key (`work_id`)
) engine = innodb comment = 'cmc项目内容表';

-- ----------------------------
-- 初始化-项目内容表
-- ----------------------------
INSERT INTO `cmc_project_work` VALUES (1, '1648881418592059394', '补测地块1（含水下）', '1:1000', 'km²', '0.59', '2020-05-15', NULL, '水下如无法施测，及时反馈。');
INSERT INTO `cmc_project_work` VALUES (2, '1648881418592059394', '补测地块2（含水下）', '1:1000', 'km²', '0.14', '2020-05-15', NULL, '水下如无法施测，及时反馈。');
INSERT INTO `cmc_project_work` VALUES (3, '1648881418592059394', '补测地块3', '1:1000', 'km²', '0.32', '2020-05-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (4, '1648881418592059394', '补测地块4', '1:1000', 'km²', '0.09', '2020-05-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (5, '1648881418592059394', '断面测量（11条）', '1:1000', 'km', '2.75', '2020-05-15', NULL, '预估工作量。如无法施测，及时反馈。');
INSERT INTO `cmc_project_work` VALUES (6, '1648881418466230273', '首部枢纽三维地形曲面制作', '1:500', 'km²', NULL, NULL, NULL, '按甲方确定范围为准');
INSERT INTO `cmc_project_work` VALUES (7, '1648881418466230273', '库区及其他部位三维地形曲面制作', '1:1000', 'km²', NULL, NULL, NULL, '按甲方确定范围为准');
INSERT INTO `cmc_project_work` VALUES (8, '1648881418256515073', '提灌站地形图测绘', '1:500', 'km²', '0.16', '2020-08-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (9, '1648881418256515073', '工程建设区地形图测绘', '1:500', 'km²', '2.7', '2020-08-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (10, '1648881418256515073', '水库区地形图修补测', '1:2000', 'km²', '0.06', '2020-08-31', NULL, '已完成，按人天计算');
INSERT INTO `cmc_project_work` VALUES (11, '1648881418256515073', '水库区地形图测绘', '1:500', 'km²', '11', '2020-08-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (12, '1648881418340401153', '羊湖电厂泵站进水渠地形地类图修测', '1:1000', 'km²', '2.5', '2020-07-06', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (13, '1648881418340401153', '泵站进水渠下游侧雅江河道断面测绘', '1:500', 'km', '2', '2020-07-06', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (14, '1648881418340401153', '直孔水电站地形图测绘', '1:500', 'km²', '0.03', '2020-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (15, '1648881418340401153', '外业进出场', NULL, '人.天', '2', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (16, '1648881418256515073', '无人机激光数据采集', '1:500', '人天', '20', '2020-08-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (17, '1648881418214572034', '控制点测量', '五等', '点', '10', '2020-09-02', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (18, '1648881418214572034', '无人机激光数据采集', NULL, '人.天', '10', '2020-09-04', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (19, '1648881418214572034', '海子河坝园区地形图测绘', '1:500', 'km²', '0.55', '2020-09-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (20, '1648881418214572034', '建坪园区地形图测绘', '1:500', 'km²', '3.4', '2020-09-05', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (21, '1648881418214572034', '洪福园区地形图测绘', '1:500', 'km²', '0.37', '2020-09-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (22, '1648881418214572034', '断面测量', '1:200', 'km', '3.2', '2020-09-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (23, '1648881418197794818', '左岸新德坝地形图测绘', '1:500', 'km²', NULL, '2020-09-13', NULL, '范围现场指定');
INSERT INTO `cmc_project_work` VALUES (24, '1648881418197794818', '右岸柳林坝未防护地段地形图测绘', '1:500', 'km²', NULL, '2020-09-13', NULL, '范围现场指定');
INSERT INTO `cmc_project_work` VALUES (25, '1648881418197794818', '闸坝左右岸及闸坝本身地形图测绘', '1:500', 'km²', NULL, '2020-09-13', NULL, '范围现场指定');
INSERT INTO `cmc_project_work` VALUES (26, '1648881418155851778', '地形图测绘', '1:1000', 'km²', '1', '2020-09-18', NULL, '委托费用');
INSERT INTO `cmc_project_work` VALUES (27, '1648881418155851778', '质量、进度管理及资料整编', NULL, '项', '1', '2020-09-18', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (28, '1648881418126491649', '库区淹没放大地形图测绘', '1:5000', 'km²', '62', '2020-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (29, '1648881418155851778', 'GNSS测量', '图根', '点', '4', '2020-09-18', NULL, '委托费用');
INSERT INTO `cmc_project_work` VALUES (30, '1648881418139074562', '土地复垦区地形图测绘', '1:1000', 'km²', '1.5', '2020-10-09', NULL, 'C区、D区、E区、F区、G区，共5个区域。10月9日交中间成果');
INSERT INTO `cmc_project_work` VALUES (31, '1648881418139074562', '取水口地形图测绘', '1:500', 'km²', '0.05', '2020-10-16', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (32, '1648881418139074562', '引水线路地形图测绘', '1:1000', 'km²', '0.25', '2020-10-16', NULL, '带状，全长约5km，宽50m控制。');
INSERT INTO `cmc_project_work` VALUES (33, '1648881418139074562', '料场地形图测绘', '1:1000', 'km²', '0.66', '2020-10-16', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (34, '1648881418139074562', '三等GNSS测量', '三等', '点', '6', '2020-10-16', NULL, '尽量利用以前加查电站的控制点成果，新增4点，引测2点');
INSERT INTO `cmc_project_work` VALUES (35, '1648881418139074562', '五等导线测量（代替四等三角高程）', '五等/四等', 'km', '6', '2020-10-16', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (36, '1648881418139074562', '项目委托及管理', NULL, '项', '1', '2020-10-20', NULL, '预算费用，委托管理');
INSERT INTO `cmc_project_work` VALUES (37, '1648881417849667586', '大邑县乱占耕地建房“工作底图”制作（图斑筛查）', NULL, '宗', '17500', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (38, '1648881417849667586', '大邑县乱占耕地建房图斑外业调查核实', NULL, '宗', NULL, '2020-11-30', NULL, '工作量依据图斑筛查结果而定。');
INSERT INTO `cmc_project_work` VALUES (39, '1648881417925165058', '水毁各工点地形图测绘', '1:500', 'm²', '50000', '2020-11-15', NULL, '项目委托费用');
INSERT INTO `cmc_project_work` VALUES (40, '1648881417925165058', 'GNSS测量', '三等', '点', '11', '2020-11-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (41, '1648881417925165058', 'GNSS测量', '五等/四等', '点', '30', '2020-11-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (42, '1648881417925165058', '三角高程测量', '四等', 'km', '48', '2020-11-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (43, '1648881417925165058', '测绘确定水毁各工点位置，路线破坏长度、现有路面标高等', '地形点', '点', '800', '2020-11-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (44, '1648881417296019457', '兴隆水库枢纽区地形地类图补测', '1:1000', 'km²', '0.2', '2020-12-11', NULL, '完成时间尽快，时间很紧，测完及时交给冯春。');
INSERT INTO `cmc_project_work` VALUES (45, '1648881421385465858', '束水墙铺盖监测', NULL, '次', '2', NULL, NULL, '2次监测，作业时间和成果提交时间，以甲方要求为准。');
INSERT INTO `cmc_project_work` VALUES (46, '1648881417333768193', '转换点采集', '五等', '点', '12', '2020-12-31', NULL, '内业由陈尚云完成');
INSERT INTO `cmc_project_work` VALUES (47, '1648881417333768193', '米易县用地红线坐标转换（转换成国家2000大地坐标系）', NULL, '点', '1135', '2020-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (48, '1648881417333768193', '盐边县用地红线坐标转换（转换成国家2000大地坐标系）', NULL, '点', '7221', '2020-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (49, '1648881417333768193', '米易县用地红线CGCS2000宗地图制作', NULL, '幅', '28', '2020-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (50, '1648881417333768193', '盐边县用地红线CGCS2000宗地图制作', NULL, '幅', '23', '2020-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (51, '1648881417333768193', '米易县用地红线ARCGIS数据库SHP文件制作', NULL, '幅', '28', '2020-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (52, '1648881417333768193', '盐边县用地红线ARCGIS数据库SHP文件制作', NULL, '幅', '23', '2020-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (53, '1648881418441064449', '地形图测绘', '1:1000', 'km²', '0.5', '2020-06-29', NULL, '阿斯布土、当卡料场地形变化范围');
INSERT INTO `cmc_project_work` VALUES (54, '1648881418441064449', '三维地形面制作', '1:1000', 'km²', '1.2', '2020-06-29', NULL, '阿斯布、当卡料场');
INSERT INTO `cmc_project_work` VALUES (55, '1648881418424287233', '尼洛河坝移民安置点地形图测绘', '1:500', 'km²', '0.2', '2020-06-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (56, '1648881418424287233', '菩提河坝移民安置点地形图测绘', '1:500', 'km²', '0.1', '2020-06-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (57, '1648881418424287233', '控制点测量', '五等/四等', '点', '6', '2020-06-29', NULL, '正规五等标石。');
INSERT INTO `cmc_project_work` VALUES (58, '1648881418386538498', '地形、布置图数字化', '1:5500', '幅', '2', NULL, NULL, '提交时间按甲方要求分期执行');
INSERT INTO `cmc_project_work` VALUES (59, '1648881418386538498', '地形、地质图数字化', '1:1500', '幅', '12', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (60, '1648881418483007490', '安全、环保、健康措施费', NULL, '项', NULL, '2020-08-20', NULL, '保险、药品等安全设施。');
INSERT INTO `cmc_project_work` VALUES (61, '1648881418483007490', '激光数据分类', '1:2000', 'km²', '100', '2020-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (62, '1648881418483007490', 'DOM制作', '1:2000', 'km²', '100', '2020-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (63, '1648881418483007490', 'DLG生产', '1:2000', 'km²', '75', '2020-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (64, '1648881418239737858', '农村宅基地、集体建设用地项目', NULL, '宗', '30000', '2020-12-31', NULL, '泸县毗卢镇、立石镇、百和镇');
INSERT INTO `cmc_project_work` VALUES (65, '1648881417954525186', 'GNSS测量', 'E级', '点', '40', '2020-11-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (66, '1648881417954525186', '水准测量', '三等', 'km', '220', '2020-11-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (67, '1648881417954525186', '护岸地形图测绘', '1:2000', 'km²', '12.77', '2020-11-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (68, '1648881417954525186', '护岸水下地形图测绘', '1:2000', 'km²', '3.19', '2020-11-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (69, '1648881417954525186', '大断面测量', '1:2000', 'km', '100', '2020-11-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (70, '1648881417954525186', '大断面基点测量', '图根', '点', '200', '2020-11-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (71, '1648881417954525186', '河道断面测量', '1:200', 'km', '25.34', '2020-11-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (72, '1648881417954525186', '河道断面基点测量', '图根', '点', '362', '2020-11-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (73, '1648881417971302402', '二等平面点选点和造埋（墩标）', NULL, '点', '1', '2020-12-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (74, '1648881417971302402', '三等平面点选点和造埋（地面标）', NULL, '点', '14', '2020-12-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (75, '1648881417971302402', '基本水准标石选点和造埋', NULL, '点', '6', '2020-12-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (76, '1648881418483007490', '机载激光扫描', NULL, 'km²', '170', '2020-07-15', NULL, '国内出差按公司出差标准结算，其余费用项目包干使用。');
INSERT INTO `cmc_project_work` VALUES (77, '1648881417971302402', '普通水准标石选点和造埋', NULL, '点', '14', '2020-12-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (78, '1648881417971302402', 'GNSS测量', '二等', '点', '22', '2020-12-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (79, '1648881417971302402', '边角网测量', '二等', '点', '16', '2020-12-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (80, '1648881417971302402', '边角网测量', '三等', '点', '38', '2020-12-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (81, '1648881417954525186', 'GNSS测量', 'D级', '点', '46', '2020-11-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (82, '1648881417971302402', '光电测距三角高程', '三等', 'km', '43', '2020-12-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (83, '1648881417971302402', '水准测量', '二等', 'km', '76', '2020-12-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (84, '1648881417971302402', '临时控制网观测', NULL, '项', '1', '2020-12-10', NULL, '8个点观测，4个埋石，4个旧点。（程昊已做）');
INSERT INTO `cmc_project_work` VALUES (85, '1648881417837084674', '成德大道桥～成绵乐高铁桥河段地形图测绘', '1:1000', 'km²', '2.7', '2020-10-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (86, '1648881417837084674', '成德大道桥～成绵乐高铁桥河段水下地形图测绘', '1:1000', 'km²', '0.8', '2020-10-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (87, '1648881417837084674', '两闸址地形图测绘（岸上）', '1:500', 'km²', '1.76', '2020-10-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (88, '1648881417837084674', '两闸址地形图测绘（水下）', '1:500', 'km²', '0.41', '2020-10-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (89, '1648881417837084674', '横断面图测量', '1:500', 'km', '71.5', '2020-11-06', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (90, '1648881417837084674', '纵断面图', '1:1000', 'km', '14.3', NULL, NULL, '完成时间待定');
INSERT INTO `cmc_project_work` VALUES (91, '1648881417837084674', '水文大断面图', '1:1000', 'km', '15.0', '2020-11-06', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (92, '1648881417837084674', '断面基点测量', '图根', '点', '42', '2020-11-06', NULL, '水文大断面布设基点');
INSERT INTO `cmc_project_work` VALUES (93, '1648881417837084674', '三维模型制作', NULL, 'km²', '5.5', '2020-11-06', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (94, '1648881417837084674', '五等GNSS测量', '五等', '点', '10', '2020-11-06', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (95, '1648881417807724546', '水下地形图测绘', '1:500', 'km²', '1.8', '2020-11-30', NULL, '范围按任务书执行');
INSERT INTO `cmc_project_work` VALUES (96, '1648881417925165058', '现场踏勘、项目管理、资料整编', NULL, '项', '1', '2020-10-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (97, '1648881417438625793', '横断面测量', '1:500', 'km', '6', '2020-11-30', NULL, '按图上画的长度测，11条');
INSERT INTO `cmc_project_work` VALUES (98, '1648881417438625793', '控制点测量', '五等', '点', '4', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (99, '1648881417438625793', '无人机飞行', NULL, '人.天', '1', '2020-11-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (100, '1648881417564454914', 'GNSSS测量', '三等', '点', '8', '2020-11-25', NULL, '引测3点，每个支洞口联测2点');
INSERT INTO `cmc_project_work` VALUES (101, '1648881417564454914', '边角网观测', '三等', '点', '6', '2020-11-25', NULL, '每个支洞口组成3点边角网');
INSERT INTO `cmc_project_work` VALUES (102, '1648881417564454914', '三角高程测量', '三等', 'km', '10', '2020-11-25', NULL, '预估工作量');
INSERT INTO `cmc_project_work` VALUES (103, '1648881417564454914', '施工支洞区转成国家2000大地坐标系', NULL, '点', '72', NULL, NULL, '已完成，作为给用户的优惠条件');
INSERT INTO `cmc_project_work` VALUES (104, '1648881417564454914', '控制点选埋', '三等', '点', '6', '2020-11-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (105, '1648881417564454914', '外业进出场', NULL, '人.天', '6', '2020-11-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (106, '1648881417782558721', '瓦孜组对外连接道路地形图测绘', '1:1000', 'km²', '1.0', '2020-11-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (107, '1648881417782558721', '钢桥和隧道终点等重点部位的高程测量', '图根', '点', '10', '2020-11-10', NULL, '钢桥和隧道终点等重点部位测量，并标注。');
INSERT INTO `cmc_project_work` VALUES (108, '1648881417438625793', '库区新增影响区大堡地形图补测', '1:2000', 'km²', '0.32', '2020-11-30', NULL, '新增部分，同时与原图接边，坐标和高程系统与原图系统一致');
INSERT INTO `cmc_project_work` VALUES (109, '1648881418558504961', '地形测量', '1:2000', 'km²', '33', '2020-06-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (110, '1648881418558504961', 'GNSS测量', '四等', '点', '20', '2020-06-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (111, '1648881418558504961', '水准测量', '四等', 'km', '84', '2020-06-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (112, '1648881418558504961', 'GNSS测量', '一级', '点', '50', '2020-06-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (113, '1648881418495590402', '枢纽区三维地形面制作', '1:1000', '幅', '5', '2020-05-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (114, '1648881418453647362', '桥址地形地类图测绘', '1:500', 'km²', '0.02', '2020-06-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (115, '1648881418453647362', '地形地类图测绘', '1:1000', 'km²', '0.38', '2020-06-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (116, '1648881418453647362', '桥址横断面测量', '1:200', 'km', '0.1', '2020-06-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (117, '1648881418453647362', 'GNSS测量', '四等', '点', '4', '2020-06-15', NULL, '正规标石');
INSERT INTO `cmc_project_work` VALUES (118, '1648881418453647362', '五等导线（四等三角高程）测量', '五等/四等', 'km', '3', '2020-06-15', NULL, '正规标石');
INSERT INTO `cmc_project_work` VALUES (119, '1648881418411704322', '控制点测量', '五等/四等', '点', '4', '2020-06-29', NULL, '枢纽区埋设正规控制点标石');
INSERT INTO `cmc_project_work` VALUES (120, '1648881418399121410', '控制点、特征点测量', '图根', '点', '91', '2020-06-23', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (121, '1648881418411704322', '枢纽区地形图测绘', '1:500', 'km²', '1.1', '2020-06-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (122, '1648881418399121410', '控制点系统转换', NULL, '点', '6', '2020-06-23', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (123, '1648881418399121410', '平面坐标、高程系统转换互关系建立', NULL, '套', '3', '2020-06-23', NULL, 'CGCS2000、广州坐标系、西安80；85国家高程基准、广州高程系');
INSERT INTO `cmc_project_work` VALUES (124, '1648881418399121410', '地形图坐标系统转换', '1:500', '幅', '30', '2020-06-23', NULL, '广州2000坐标系---广州坐标系');
INSERT INTO `cmc_project_work` VALUES (125, '1648881418399121410', '复甦村公路带状地形图测绘', '1:500', '幅', '1', '2020-06-23', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (126, '1648881418399121410', '地形图测绘', '1:500', 'km²', '5', NULL, NULL, '预估工作，以甲方确定为准');
INSERT INTO `cmc_project_work` VALUES (127, '1648881418399121410', '新桥村高程点补测', '地形点', '点', '146', '2020-06-23', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (128, '1648881418399121410', '地形图坐标、高程系统转换', NULL, '幅', '6', '2020-06-30', NULL, '二期工作');
INSERT INTO `cmc_project_work` VALUES (129, '1648881418399121410', '蔡二村道路地形图补测', '1:500', 'km²', '0.01', '2020-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (130, '1648881418399121410', '南村净水厂道路地形图补测', '1:500', 'km²', '0.04', '2020-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (131, '1648881418399121410', '员岗道路地形图补测', '1:500', 'km²', '0.02', '2020-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (132, '1648881418369761282', '公路中桩测设', '图根', 'km', '9', '2020-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (133, '1648881418369761282', '纵断面测量', '1:1000', 'km', '9', '2020-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (134, '1648881418369761282', '横断面测量', '1:1000', NULL, NULL, '2020-06-30', NULL, '沿测设中桩桩号测量横断面');
INSERT INTO `cmc_project_work` VALUES (135, '1648881418369761282', '后续工作', NULL, NULL, NULL, NULL, NULL, '川陕路及之前的任务由罗业华负责，之后任务由刘洋负责。');
INSERT INTO `cmc_project_work` VALUES (136, '1648881418185211906', '项目区整体地形数据采建模型', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (137, '1648881418185211906', '工程开挖区域精密测量及工程量计算', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (138, '1648881418185211906', '软件技术培训服务', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (139, '1648881417862250498', '地形图测绘(带状)', '1:1000', 'km²', '0.125', '2020-10-26', NULL, '2.5km*0.05km（河床及两侧受洪水影响区域）');
INSERT INTO `cmc_project_work` VALUES (140, '1648881417862250498', '正射影像图DOM制作', '1:1000', 'km²', '0.125', '2020-10-26', NULL, '完成时间现场落实');
INSERT INTO `cmc_project_work` VALUES (141, '1648881418369761282', '地形图测绘', '1:500', 'km²', '2', '2020-06-30', NULL, '预估工作量。');
INSERT INTO `cmc_project_work` VALUES (142, '1648881417820307458', '砼观测墩选点与造埋', '二等', '点', '10', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (143, '1648881417820307458', '混凝土基本水准标石选点与造埋', '二等', '点', '3', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (144, '1648881417820307458', '普通水准标石选点与造埋', '二等', '点', '10', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (145, '1648881417820307458', 'GPS测量', '二等', '点', '14', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (146, '1648881417820307458', '三角网观测', '二等', '点', '5', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (147, '1648881417820307458', '边长观测', '二等', '条', '10', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (148, '1648881417820307458', '水准测量', '二等', 'km', '50', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (149, '1648881417820307458', '渡河水准测量', '二等', '处', '2', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (150, '1648881417644146689', '边角网观测', '二等', '点', '17', '2020-12-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (151, '1648881417644146689', '二等水准观测', '二等', 'km', '5', '2020-12-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (152, '1648881417753198593', '居民点规划、公路用地图、孔龙垫高施工图、G317用地图、X6890用地、可尔因用地图坐标转换CGCS2000', NULL, '幅', '23', '2020-11-03', NULL, '分两批提交，10月30日提交一批，11月3日提交一批');
INSERT INTO `cmc_project_work` VALUES (153, '1648881417644146689', '三角高程测量', '三等', 'km', '30', '2020-12-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (154, '1648881417736421378', '3#水下地形图测绘', '1:1000', 'km²', '0.1', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (155, '1648881417736421378', '无人机飞行', NULL, '人.天', '1', '2020-11-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (156, '1648881417736421378', '依生沟渣场地形图测绘', '1:1000', 'km²', '1.23', '2020-12-04', NULL, '2020.11.24新增');
INSERT INTO `cmc_project_work` VALUES (157, '1648881417400877057', '无人机低空摄影', NULL, '亩', '49000', '2020-12-21', NULL, '影像分辨率0.1m');
INSERT INTO `cmc_project_work` VALUES (158, '1648881417400877057', '数字正射影像（DOM）制作', '1:1000', '亩', '49000', '2020-12-21', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (159, '1648881417539289089', '坝址区地形图测绘', '1:1000', 'km²', '10.56', '2020-12-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (160, '1648881417736421378', '3#渣场地形图测绘', '1:1000', 'km²', '1.4', '2020-11-30', NULL, '利用已有激光数据，无人机航摄修补测。');
INSERT INTO `cmc_project_work` VALUES (161, '1648881418327818241', '康生寺外部供水工程引水线路地形图测绘', '1:1000', 'km²', '0.253', '2020-07-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (162, '1648881418327818241', '康生寺外部供水工程取水口地形图测绘', '1:500', 'km²', '0.077', '2020-07-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (163, '1648881418327818241', '康生寺水厂', '1:500', 'km²', '0.025', '2020-07-20', NULL, '按最小面积0.05km²预算');
INSERT INTO `cmc_project_work` VALUES (164, '1648881418327818241', '大石凼居民点地形图补测', '1:500', 'km²', '0.09', '2020-07-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (165, '1648881418327818241', '年克寺对外连接道路测量', '1:500', 'km²', '0.031', '2020-07-20', NULL, '按最小面积0.05km²预算');
INSERT INTO `cmc_project_work` VALUES (166, '1648881418327818241', '松岗直波大地广场范围高程点测量', '图根', '点', '20', '2020-07-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (167, '1648881418290069506', 'GNSS测量', '二等', '点', '4', '2020-08-31', NULL, '陈唐镇布设');
INSERT INTO `cmc_project_work` VALUES (168, '1648881418290069506', 'GNSS测量', '三等', '点', '75', '2020-08-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (169, '1648881418290069506', '三角高程测量', '三等', 'km', '30', '2020-08-31', NULL, '根据水准点分布情况局部测量');
INSERT INTO `cmc_project_work` VALUES (170, '1648881418290069506', '重点河段地形图测绘', '1:2000', 'km²', '39.1', '2020-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (171, '1648881417262465026', '芦稿溪、兴隆沟、马边河河道大断面测量', '1:1000', 'km', '7.00', '2021-01-08', NULL, '28条断面，按250m/条预计');
INSERT INTO `cmc_project_work` VALUES (172, '1648881417262465026', '涉水建筑物（拦河景观堰、桥梁）高程测量', '图根', '点', '40', '2021-01-08', NULL, '马边县城鹰岩佬大桥以下至下溪乡测量范围，提供建筑物名称、位置、实景照片、预估工作量。');
INSERT INTO `cmc_project_work` VALUES (173, '1648881417262465026', '收集测量范围内数字矢量地形图', '1:10000', '幅', '5', '2021-01-08', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (174, '1648881418227154945', '高原常备药品等', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (175, '1648881418227154945', '外业进出场', NULL, '人.天', '48', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (176, '1648881417904193537', '三维模型制作', '1:1000', 'km²', '120', '2020-11-30', NULL, '按相同比例尺航测内业0.1计算');
INSERT INTO `cmc_project_work` VALUES (177, '1648881417904193537', '库容计算', NULL, '项', '1', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (178, '1648881417904193537', '像控点测量', '1:1000', 'km²', '120', '2020-11-15', NULL, '按相同比例尺航测外业0.1计算');
INSERT INTO `cmc_project_work` VALUES (179, '1648881417904193537', '资料整理、项目管理', NULL, '项', '1', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (180, '1648881417769975809', 'GNSS测量', '二等', '点', '58', '2020-11-30', NULL, '连测高等级控制点，转换2000大地坐标');
INSERT INTO `cmc_project_work` VALUES (181, '1648881417769975809', 'GNSS测量', '四等', '点', '10', '2020-11-30', NULL, '连测国家水准点及相关高程点');
INSERT INTO `cmc_project_work` VALUES (182, '1648881417769975809', '非重点河道地形图测绘', '1:10000', 'km²', '251', '2020-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (183, '1648881417769975809', '非重点河段正射影像（DOM）制作', '1:10000', 'km²', '251', '2020-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (184, '1648881417769975809', '非重点河段数字高程模型（DEM）制作', '1:10000', 'km²', '251', '2020-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (185, '1648881417769975809', '非重点河段大断面及水位测量', '1:2000', 'km', '18', '2020-11-20', NULL, '36条断面');
INSERT INTO `cmc_project_work` VALUES (186, '1648881417769975809', '断面基点测量', '1:2000', '点', '72', '2020-11-20', NULL, '每条断面2个基点');
INSERT INTO `cmc_project_work` VALUES (187, '1648881417769975809', '水边线测量', '1:2000', 'km', '1', '2020-11-20', NULL, '最后一条断面，上下游各500m');
INSERT INTO `cmc_project_work` VALUES (188, '1648881417769975809', '界桩放样、制作与安装', NULL, '根', '120', '2021-06-30', NULL, '含制作、运输、安装');
INSERT INTO `cmc_project_work` VALUES (189, '1648881417769975809', '标示牌放样、制作与安装', NULL, '根', '10', '2021-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (190, '1648881417904193537', '多镜头倾斜摄影', '1:1000', 'km²', '130', '2020-10-31', NULL, '3000元/平方千米');
INSERT INTO `cmc_project_work` VALUES (191, '1648881417769975809', '数据入库', '1:10000', '幅', '30', '2021-06-30', NULL, '包含DLG、DEM、DOM入库');
INSERT INTO `cmc_project_work` VALUES (192, '1648881417874833410', '立面图测量', NULL, '项', '1', NULL, NULL, '委托费用1元/平方米。');
INSERT INTO `cmc_project_work` VALUES (193, '1648881417874833410', '项目管理与资料整编', NULL, '项', '1', '2020-11-06', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (194, '1648881417539289089', '坝址区水下地形图测绘', '1:1000', 'km²', '0.8', '2020-12-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (195, '1648881417539289089', '坝址区三维模型制作', '1:1000', 'km²', '11.36', '2020-12-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (196, '1648881417539289089', '坝址区三维地形面制作', '1:1000', 'km²', '11.36', '2020-12-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (197, '1648881417539289089', '三等GNSS测量', '三等', '点', '8', '2020-12-15', NULL, '含引测2点，新建6点');
INSERT INTO `cmc_project_work` VALUES (198, '1648881417539289089', '五等导线测量（代替四等三角高程）', '五等/四等', 'km', '10', '2020-12-15', NULL, '含引测');
INSERT INTO `cmc_project_work` VALUES (199, '1648881417539289089', '激光飞行地面配合', NULL, '人.天', '10', '2020-12-10', NULL, '预估工作量');
INSERT INTO `cmc_project_work` VALUES (200, '1648881417539289089', '外业进出场', NULL, '人.天', '16', '2020-11-25', NULL, '预估工作量');
INSERT INTO `cmc_project_work` VALUES (201, '1648881417472180225', '坎娘碱性骨料料场地形图测绘', '1:2000', 'km²', '1.0', '2021-01-25', NULL, '地质人员现场指定位置');
INSERT INTO `cmc_project_work` VALUES (202, '1648881417472180225', '雪巴滑坡地形图测绘', '1:2000', 'km²', '1.5', '2021-01-25', NULL, '地质人员现场指定位置');
INSERT INTO `cmc_project_work` VALUES (203, '1648881417472180225', 'GNSS测量', '四等', '点', '6', '2021-01-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (204, '1648881417472180225', '三角高程测量', '四等', 'km', '10', '2021-01-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (205, '1648881417472180225', '无人机航飞', NULL, '人.天', '4', '2020-12-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (206, '1648881417472180225', '进出场', NULL, '人.天', '6', '2021-01-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (207, '1648881417509928962', '施工场地地形图测绘', '1:1000', 'km²', '6.48', '2020-12-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (208, '1648881417509928962', '玉坝村地形地类图测绘', '1:1000', 'km²', '0.62', '2020-12-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (209, '1648881417509928962', '厂址区下游至易贡藏布汇口地形图测绘', '1:2000', 'km²', '2.5', '2020-12-25', NULL, '河道两侧各200m，新测');
INSERT INTO `cmc_project_work` VALUES (210, '1648881417509928962', '紫霞库区断面测量', '1:1000', 'km', '20', '2020-12-25', NULL, '40条断面，每条预计500m，陆地部分点云量测，按0.5计算');
INSERT INTO `cmc_project_work` VALUES (211, '1648881417509928962', '断面基点测量', '图根', '点', '40', '2020-12-25', NULL, '每条断面至少1个基点');
INSERT INTO `cmc_project_work` VALUES (212, '1648881417509928962', '紫霞库区纵断面测量', '1:1000', 'km', '25', '2020-12-25', NULL, '同时水边线，包括干支流。测点间距按50m控制，同时需确保大断面位置有测点。');
INSERT INTO `cmc_project_work` VALUES (213, '1648881417509928962', '飞行地面配合', NULL, '人.天', '18', '2020-12-25', NULL, '按3人6天预计');
INSERT INTO `cmc_project_work` VALUES (214, '1648881417509928962', '进出场', NULL, '人.天', '20', '2020-12-25', NULL, '按4人5天预计');
INSERT INTO `cmc_project_work` VALUES (215, '1648881417367322626', '莫中坝水下地形图', '1:500', 'km²', '0.264', '2020-12-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (216, '1648881417367322626', '慈母溪渡口、雷中坝渡口水下地形图', '1:500', 'km²', '0.666', '2020-12-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (217, '1648881417367322626', '已采挖沙石方量计算', NULL, '项', '1', '2020-12-15', NULL, '利用2017年及此次测绘水下地形图计算采挖量');
INSERT INTO `cmc_project_work` VALUES (218, '1648881418575282177', '地形图测绘', '1:1000', 'km²', '0.6', '2020-05-22', NULL, '以实际现场指定为准');
INSERT INTO `cmc_project_work` VALUES (219, '1648881418575282177', '横断面测量', '1:200', 'km', '4', '2020-05-22', NULL, '断面长200m，每隔150m一条');
INSERT INTO `cmc_project_work` VALUES (220, '1648881418541727745', '汤坝新址地形地类图测绘', '1:500', 'km²', '0.27', '2020-06-02', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (221, '1648881418508173314', '征地红线坐标系转换', NULL, '处', '14', '2020-05-25', NULL, '转图清单见附件，转为2000坐标系arcgis文件');
INSERT INTO `cmc_project_work` VALUES (222, '1648881418508173314', '库区淹没影响示意图坐标系转换', NULL, '项', '1', NULL, NULL, '成果要求、完成时间按甲方要求');
INSERT INTO `cmc_project_work` VALUES (223, '1648881418524950530', '沿河道航拍视频拍摄', NULL, 'km²', '41.12', '2020-06-19', NULL, '拍摄视频素材，路径由项目部确定，1080p');
INSERT INTO `cmc_project_work` VALUES (224, '1648881418524950530', '定点位航拍全景图制作', NULL, '个', '5', '2020-06-19', NULL, '点位由项目部确定');
INSERT INTO `cmc_project_work` VALUES (225, '1648881418524950530', '三江汇流区无人机倾斜摄影', NULL, 'km²', '2', '2020-06-19', NULL, '生产正射影像和实景三维模型。范围由项目部确定，暂估2km²，建议按照5cm分辨率实施');
INSERT INTO `cmc_project_work` VALUES (226, '1648881418524950530', '电站枢纽三维模型制作', NULL, '项', '1', '2020-06-19', NULL, '根据项目部提供的设计CAD图制作，重点水上部分，时间视范围情况');
INSERT INTO `cmc_project_work` VALUES (227, '1648881418524950530', '三江汇流区电子沙盘制作', NULL, 'km²', '2', '2020-06-19', NULL, '为视频制作提供基础数据，时间视范围情况');
INSERT INTO `cmc_project_work` VALUES (228, '1648881418524950530', '三江汇流区演示视频制作', NULL, '秒', '600', '2020-06-30', NULL, '时间视具体要求情况，暂按10分钟预计');
INSERT INTO `cmc_project_work` VALUES (229, '1648881418290069506', '重点河段正射影像图制作', '1:2000', 'km²', '39.1', '2020-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (230, '1648881418290069506', '重点河段数字高程模型制作', '1:2000', 'km²', '39.1', '2020-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (231, '1648881418290069506', '非重点河段地形图测量', '1:10000', 'km²', '300', '2020-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (232, '1648881418290069506', '非重点河段地形图复核', '1:10000', 'km²', '100', '2020-08-20', NULL, '按实测工作量的20%');
INSERT INTO `cmc_project_work` VALUES (233, '1648881418290069506', '非重点河段正射影像图制作', '1:10000', 'km²', '400', '2020-08-20', NULL, '按实测工作量的30%');
INSERT INTO `cmc_project_work` VALUES (234, '1648881418290069506', '非重点河段数字高程模型制作', '1:10000', 'km²', '400', '2020-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (235, '1648881418290069506', '河段横断面测量', '1:2000', 'km', '40', '2020-08-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (236, '1648881418290069506', '河段横断面测量', '1:5000', 'km', '44', '2020-08-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (237, '1648881418290069506', '流量及水边线测量', '1:2000', 'km', '3', '2020-08-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (238, '1648881418290069506', '界桩牌制作与安装', NULL, '项', '1', NULL, NULL, '工作量待定');
INSERT INTO `cmc_project_work` VALUES (239, '1648881418290069506', '无人机航飞', NULL, '人.天', '10', '2020-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (240, '1648881418290069506', '进出场', NULL, '人.天', '16', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (241, '1648881418302652417', '白云区市管河道防洪潮闸闭合段情况摸查坐标高程测量', NULL, '处', '36', '2020-07-24', NULL, '36个闸坝，每个闸坝测6个坐标高程和2个长度。');
INSERT INTO `cmc_project_work` VALUES (242, '1648881418273292290', 'GNSS测量', 'E级', '点', '18', '2022-07-31', NULL, '包括联测起算点');
INSERT INTO `cmc_project_work` VALUES (243, '1648881418273292290', '地形图测绘', '1:500', 'km²', '15.25', '2022-07-31', NULL, '工作量以甲方通知为准');
INSERT INTO `cmc_project_work` VALUES (244, '1648881418273292290', '土地勘测定界测绘', NULL, 'km²', '15.25', '2022-07-31', NULL, '工作量以甲方通知为准');
INSERT INTO `cmc_project_work` VALUES (245, '1648881418273292290', '项目区基本农田及林地情况图制作', NULL, '项', '1', '2022-07-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (246, '1648881418172628994', '草坡水电站地形图测绘', '1:1000', 'km²', '0.5', '2020-09-20', NULL, '委托费用');
INSERT INTO `cmc_project_work` VALUES (247, '1648881418172628994', '下庄水电站地形图测绘', '1:1000', 'km²', '1.3', '2020-09-20', NULL, '委托费用');
INSERT INTO `cmc_project_work` VALUES (248, '1648881418172628994', '控制点测量', '五等', '点', '8', '2020-09-20', NULL, '下庄、草坡水电站各新建4点');
INSERT INTO `cmc_project_work` VALUES (249, '1648881418172628994', '现场查勘及项目管理', NULL, '人.天', '6', '2020-09-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (250, '1648881418034216962', '永久桩、加密桩测设', NULL, '点', '600', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (251, '1648881418034216962', '界桩制作埋设', NULL, '点', '600', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (252, '1648881418034216962', '临时界桩测设', NULL, '点', '900', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (253, '1648881418034216962', '地形图测绘', '1:1000', 'km²', '10', '2020-11-30', NULL, '委托管理');
INSERT INTO `cmc_project_work` VALUES (254, '1648881418034216962', '道路面积测量', '1:1000', 'km²', '0.3', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (255, '1648881418034216962', '绿化面积测量', '1:1000', 'm²', '1.0', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (256, '1648881418034216962', '公共区域面积测量', '1:1000', 'm²', '0.25', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (257, '1648881418034216962', '控制点测量', '四等', '点', '8', '2020-11-30', NULL, '含引测。四等平面、五等高程。');
INSERT INTO `cmc_project_work` VALUES (258, '1648881417887416322', '飞行区、航站区、工作区地形图测绘', '1:500', 'km²', '36.6', '2020-12-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (259, '1648881417887416322', '铁路区域地形图测绘', '1:500', 'km²', '1', '2020-12-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (260, '1648881417887416322', '净空区域地形图测绘', '1:1000', 'km²', '30.3', '2020-12-20', NULL, '（备注：规划设计、土方预算服务）');
INSERT INTO `cmc_project_work` VALUES (261, '1648881417707061250', '坝区上下游控制网复测', '三等', '次', '1', '2020-11-27', NULL, '2020年复测');
INSERT INTO `cmc_project_work` VALUES (262, '1648881417707061250', '坝区控制网点复测', '二等', '次', '1', '2020-11-27', NULL, '2020年复测');
INSERT INTO `cmc_project_work` VALUES (263, '1648881417707061250', '水准测量', '二等', '次', '1', '2020-11-27', NULL, '2020年复测');
INSERT INTO `cmc_project_work` VALUES (264, '1648881417723838466', '左岸泄洪雾化区地形图测绘', '1:1000', 'km²', '1.86', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (265, '1648881417723838466', '左岸泄洪雾化区三维地形面制作', '1:1000', 'km²', '1.86', '2020-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (266, '1648881417723838466', '无人机飞行', '1:1000', '人.天', '1', '2020-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (267, '1648881417795141633', '武都引水闸枢纽地形测绘', '1:500', 'km²', '0.195', '2020-10-28', NULL, '范围：取水闸上游0-030~下游0+500，右岸公路内侧，左岸河床挡墙内侧150m（具体范围坐标见附图）');
INSERT INTO `cmc_project_work` VALUES (268, '1648881417509928962', '坝址区水下地形图测绘', '1:500', 'km²', '0.14', '2020-12-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (269, '1648881417509928962', '厂址区地形图测绘', '1:1000', 'km²', '2.55', '2020-12-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (270, '1648881417509928962', '厂址区水下地形图测绘', '1:500', 'km²', '0.1', '2020-12-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (271, '1648881417509928962', '引水线路地形图测绘', '1:5000', 'km²', '7.58', '2020-12-25', NULL, '卫片内业测图');
INSERT INTO `cmc_project_work` VALUES (272, '1648881417509928962', '坝址区地形地类图测绘', '1:1000', 'km²', '3.94', '2020-12-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (273, '1648881417509928962', '改建公路地形图测绘', '1:2000', 'km²', '5.2', '2020-12-25', NULL, '3730m-3800m高程，库尾截止3735m高程，原有1:5000地形图');
INSERT INTO `cmc_project_work` VALUES (274, '1648881417509928962', '库区地形地类图测绘', '1:2000', 'km²', '8.4', '2020-12-25', NULL, '3730m高程以下，原有1:5000地形图');
INSERT INTO `cmc_project_work` VALUES (275, '1648881418315235330', '地形图数字化', '1:5000', 'km²', '4.997', '2020-07-29', NULL, '5块，97年地形图数字化');
INSERT INTO `cmc_project_work` VALUES (276, '1648881418315235330', '砂石总含量（不含砂石比）计算', NULL, NULL, NULL, '2020-07-29', NULL, '两个时间点的地形叠加测算期间堆积量。');
INSERT INTO `cmc_project_work` VALUES (277, '1648881418227154945', 'GNSS测量', '二等', '点', '12', '2020-10-20', NULL, '无国家控制点区域按需要布设');
INSERT INTO `cmc_project_work` VALUES (278, '1648881418227154945', 'GNSS测量', '四等', '点', '210', '2020-10-20', NULL, '每10km一组，一组3点');
INSERT INTO `cmc_project_work` VALUES (279, '1648881418315235330', '库区地形图', '1:2000', 'km²', '4.997', '2020-07-29', NULL, '5块，大部分为水下地形');
INSERT INTO `cmc_project_work` VALUES (280, '1648881418227154945', '高程测量', '四等', 'km', '510', '2020-10-20', NULL, '部分河段单程双测');
INSERT INTO `cmc_project_work` VALUES (281, '1648881418227154945', '河道横断面测量', '1:2000', 'km', '210', '2020-10-20', NULL, '非重点河段，断面岸上部分在图上提取');
INSERT INTO `cmc_project_work` VALUES (282, '1648881418227154945', '地形图测绘', '1:10000', 'km²', '400', '2020-10-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (283, '1648881418227154945', 'DOM制作', '1:10000', 'km²', '400', '2020-10-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (284, '1648881418227154945', 'DEM制作', '1:10000', 'km²', '400', '2020-10-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (285, '1648881417044361218', '引水线路地形图测绘', NULL, NULL, NULL, NULL, NULL, '范围现场张波：13708019335确定');
INSERT INTO `cmc_project_work` VALUES (286, '1648881417224716290', '牙根一级水电站水库淹没区及枢纽工程建设区界桩布置图设计', '项', '项', '1', '2020-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (287, '1648881417115664385', '外观监测', NULL, '次', '12', '2020-12-31', NULL, '项目包干费用');
INSERT INTO `cmc_project_work` VALUES (288, '1648881417077915649', 'GNSS控制测量', 'D级', '个', '21', '2021-12-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (289, '1648881417077915649', '水准测量', '四等', 'km', '128', '2021-12-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (290, '1648881417077915649', '地形图测绘', '1:500', '幅', '681', '2021-12-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (291, '1648881417077915649', '一二级控制测量', '一级', '个', '681', '2021-12-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (292, '1648881417186967554', '施工用地范围图转成2000国家大地坐标系', NULL, '点', '156', '2020-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (293, '1648881421444186113', '双江口水电站枢纽工程测量中心2019年度测绘服务', NULL, '项', '1', '2019-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (294, '1648881416792702977', '多吉坝址地形图测绘(含水下)', '1:1000', 'km²', '4.83', '2021-02-10', NULL, '利用激光数据');
INSERT INTO `cmc_project_work` VALUES (295, '1648881416792702977', '木灰坝址地形图测绘', '1:1000', 'km²', '1.77', '2021-02-10', NULL, '利用激光数据');
INSERT INTO `cmc_project_work` VALUES (296, '1648881416792702977', '日衣变形体地形图测绘', '1:1000', 'km²', '1.0', '2021-02-10', NULL, '利用激光数据');
INSERT INTO `cmc_project_work` VALUES (297, '1648881416792702977', '木灰料场地形图测绘', '1:1000', 'km²', '1.94', '2021-02-10', NULL, '利用激光数据');
INSERT INTO `cmc_project_work` VALUES (298, '1648881416792702977', '施工临时场地地形图测绘', '1:2000', 'km²', '2.43', '2021-02-10', NULL, '无人机航测');
INSERT INTO `cmc_project_work` VALUES (299, '1648881416792702977', 'GNSS测量', '三等', '点', '6', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (300, '1648881416792702977', 'GNSS测量', '四等', '点', '4', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (301, '1648881416792702977', '三角高程测量', '三等', 'km', '13', '2021-02-10', NULL, '单程双测');
INSERT INTO `cmc_project_work` VALUES (302, '1648881416792702977', '进出场', NULL, '人.天', '20', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (303, '1648881416759148545', '龚嘴水电站1:1000地形图测绘（含水下）', '1:1000', 'km²', '2', '2021-02-10', NULL, '测绘范围按实施计划并联系甲方确认');
INSERT INTO `cmc_project_work` VALUES (304, '1648881416759148545', '铜街子水电站1:1000地形图测绘', '1:1000', 'km²', '2', '2021-02-10', NULL, '测绘范围按实施计划并联系甲方确认');
INSERT INTO `cmc_project_work` VALUES (305, '1648881416759148545', '无人机飞行', NULL, '人.天', '4', '2021-01-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (306, '1648881416759148545', '进出场', NULL, '人.天', '6', '2021-01-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (307, '1648881416578793474', '二滩水电站大坝外部变形观测及谷坡稳定性监测', NULL, '项', '1', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (308, '1648881416557821953', '桐子林水电站大坝外部变形和近坝区滑坡体观测', NULL, '项', '1', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (309, '1648881416394244098', '双柏树地形图补测', '1:1000', 'km²', '0.23', '2021-02-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (310, '1648881416310358017', '新联土料场复垦1:1000地形图测绘', '1:1000', 'km²', '0.8', '2021-03-19', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (311, '1648881416310358017', '新联料场生产用水外部引水工程1:1000地形图测绘', '1:1000', 'km²', '0.5', '2021-03-19', NULL, '长度约7km');
INSERT INTO `cmc_project_work` VALUES (312, '1648881416310358017', '三角高程测量', '四等', 'km', '29', '2021-03-19', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (313, '1648881416260026369', '康定市升航村大坡地安置点地形图测绘', '1:500', 'km²', '0.18', '2021-03-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (314, '1648881416260026369', '控制点测量', '五等', '点', '3', '2021-03-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (315, '1648881415706378241', '坐标转换（转成80西安坐标系）', NULL, '点', '900', '2021-06-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (316, '1648881415706378241', '坐标转换(转成经纬度坐标)', NULL, '点', '900', '2021-06-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (317, '1648881415429554178', '昆地地形地类图测量', '1:500', 'km²', '0.2', '2021-08-02', NULL, '7月29日前提交中间成果。');
INSERT INTO `cmc_project_work` VALUES (318, '1648881415316307970', '截弯梯级对外交通专用公路1', NULL, '项', '1', '2021-07-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (319, '1648881415316307970', '米林两路（左右岸）', NULL, '项', '1', '2021-07-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (320, '1648881415316307970', '米林施工总布置图', NULL, '项', '1', '2021-07-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (321, '1648881416046116866', '左岸泄洪雾化区1:1000 DOM制作', '1:1000', 'km²', '1.87', '2021-04-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (322, '1648881416046116866', '淹没区勘界图CGCS2000坐标转换', NULL, '点', '480', '2021-04-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (323, '1648881416046116866', '水库影响区CGCS2000坐标转换', NULL, '点', '280', '2021-04-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (324, '1648881415316307970', 'JW梯级电站施工总布置', NULL, '项', '1', '2021-07-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (325, '1648881416046116866', '枢纽工程CGCS2000坐标转换', NULL, '点', '96', '2021-04-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (326, '1648881416046116866', '移民工程CGCS2000坐标转换', NULL, '点', '1292', '2021-04-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (327, '1648881416046116866', '环保工程CGCS2000坐标转换', NULL, '点', '252', '2021-04-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (328, '1648881415932870657', '孙家沟实物指标配合测量', NULL, '人.天', NULL, '2021-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (329, '1648881415316307970', 'XR枢纽布置', NULL, '项', '1', '2021-07-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (330, '1648881415349862402', '泸县自然资源（九曲河）按相关要求划定登记单元范围并完成确权登记', NULL, '项', '1', '2020-12-31', NULL, '委外费用70000元');
INSERT INTO `cmc_project_work` VALUES (331, '1648881415375028225', '五等点', '五等', '点', '8', '2021-08-02', NULL, '测区高程4000以上。');
INSERT INTO `cmc_project_work` VALUES (332, '1648881415375028225', '拟建场址地形图测绘', '1:2000', 'km²', '10', '2021-08-02', NULL, '含内业费用。');
INSERT INTO `cmc_project_work` VALUES (333, '1648881415375028225', '无人机飞行', '1:2000', '人.天', '4', '2021-07-02', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (334, '1648881415064649729', '工程区地形图测绘', '1:5000', 'km²', '6.14', '2021-08-20', NULL, '外业补测、调绘工作，2处。');
INSERT INTO `cmc_project_work` VALUES (335, '1648881418952769538', '两河口水电站工程测量服务（2020年度）', NULL, '项', '1', '2020-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (336, '1648881415064649729', '上水库（坝）区、输水发电系统区、下水库（坝）区地形图测绘', '1:2000', 'km²', '13.69', '2021-08-20', NULL, '外业补测、调绘工作。');
INSERT INTO `cmc_project_work` VALUES (337, '1648881416520073217', '河口水电站取水口地形图测量', '1:500', '项', '1', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (338, '1648881416520073217', '湾东水电站厂区地形图测量', '1:500', '项', '1', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (339, '1648881416520073217', '河口水电站厂区地形图测量', '1:500', '项', '1', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (340, '1648881416520073217', '三角高程控制测量', '三等', '项', '1', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (341, '1648881416520073217', 'GNSS控制测量', '一级', '项', '1', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (342, '1648881416520073217', '图根控制测量', '图根', '项', '1', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (343, '1648881416520073217', '取水口底板、厂房地面高程、厂房尾水底板四等三角高程测量', NULL, '项', '1', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (344, '1648881416520073217', '资料整编、报告编写', NULL, '项', '1', '2021-02-10', NULL, '项目总体委托费用');
INSERT INTO `cmc_project_work` VALUES (345, '1648881416482324482', '机载激光数据采集', NULL, '项', '1', NULL, NULL, '绩效工资预算');
INSERT INTO `cmc_project_work` VALUES (346, '1648881416184528898', '地形图测绘', '1:1000', 'km²', '0.4', '2021-04-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (347, '1648881416184528898', '横断面测量（含水下）', '1:200', 'km', '20', '2021-04-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (348, '1648881416184528898', '纵断面', '1:500', 'km', '4', '2021-04-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (349, '1648881416184528898', '纵断面', '1:200', 'km', '5', '2021-04-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (350, '1648881415475691522', '带状地形图测绘', '1:1000', 'km²', '12.5', '2021-08-13', NULL, '其中6km需在7月20日前提交');
INSERT INTO `cmc_project_work` VALUES (351, '1648881416184528898', '水下地形图测绘', '1:1000', 'km²', '0.6', '2021-04-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (352, '1648881415475691522', '倾斜摄影', '1:500', 'km²', '12.5', '2021-07-16', NULL, '已经委托飞马公司飞行');
INSERT INTO `cmc_project_work` VALUES (353, '1648881415475691522', '正射影像图制作', '1:1000', 'km²', '12.5', '2021-08-13', NULL, '其中6km需在7月20日前提交');
INSERT INTO `cmc_project_work` VALUES (354, '1648881415475691522', '三维模型制作', '1:1000', 'km²', '12.5', '2021-08-13', NULL, '分辨率5cm');
INSERT INTO `cmc_project_work` VALUES (355, '1648881415395999745', '航飞', '1:2000', 'km²', '40', '2021-08-31', NULL, '按2000精度进行航飞和采集，带宽为中线两侧各500m；航摄成图工作包含激光雷达航飞、倾斜摄影、相控、空三、');
INSERT INTO `cmc_project_work` VALUES (356, '1648881415395999745', '地形图测绘', '1:500', 'km²', '6', '2021-08-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (357, '1648881415395999745', '中桩放线', NULL, 'km', '40', '2021-08-31', NULL, '中桩初测放线定桩并采集纵断面，桥梁左中右三条平行地面线；如遇改线或调整线路，需重新放线');
INSERT INTO `cmc_project_work` VALUES (358, '1648881415395999745', '1:1万外业调绘', '1:10000', 'km²', '27.5', '2021-08-31', NULL, '甲方提供1：1万电子成果，供乙方修测');
INSERT INTO `cmc_project_work` VALUES (359, '1648881415395999745', '高压线测量', '1:500', '处', '40', '2021-08-31', NULL, '测量35KV及以上的高压线杆（塔）顶级最低处悬线高程；范围为中线左右各500m内；');
INSERT INTO `cmc_project_work` VALUES (360, '1648881415395999745', '四等平面及高程控制测量', '四等', '点', '90', '2021-08-31', NULL, '水泥现浇，提供点之记、成果表。');
INSERT INTO `cmc_project_work` VALUES (361, '1648881415412776962', '枢纽区地形图测绘', '1:500', 'km²', '10', '2021-08-31', NULL, '预估工期，工期与项目上沟通确认。');
INSERT INTO `cmc_project_work` VALUES (362, '1648881415412776962', '库区防洪堤带状地形图测绘', '1:1000', 'km²', '3.8', '2021-08-31', NULL, '预估工期，工期与项目上沟通确认。');
INSERT INTO `cmc_project_work` VALUES (363, '1648881415412776962', '防洪堤横断面测量', '1:200', 'km', '18.4', '2021-08-31', NULL, '预估工期，工期与项目上沟通确认。');
INSERT INTO `cmc_project_work` VALUES (364, '1648881415412776962', '断面基点测量', '图根', '点', '184', '2021-08-31', NULL, '预估工期，工期与项目上沟通确认。断面基点按埋石计费。');
INSERT INTO `cmc_project_work` VALUES (365, '1648881415412776962', '现场联测吴淞高程点', NULL, '人.天', '1', '2021-04-14', NULL, '与2021C27重复，刘洋自己开车去的，一天');
INSERT INTO `cmc_project_work` VALUES (366, '1648881415412776962', '老木孔1985国家高程基准联测点', NULL, '人.天', '2', '2021-04-14', NULL, '与一项相同。');
INSERT INTO `cmc_project_work` VALUES (367, '1648881415412776962', '乌尤寺水文站水文高程读数高程转换（由吴淞高程转成1985国家高程基准）', NULL, '人.天', '3', '2021-04-16', NULL, '6815点，与2021C27重复');
INSERT INTO `cmc_project_work` VALUES (368, '1648881415286947841', '淹没区地形地类图测绘（雅江县城至立丘河下游吊桥）', '1:5000', 'km²', '55', '2021-08-12', NULL, '点云9.7km²，1:2000缩编8.2km²。其余部分委外。');
INSERT INTO `cmc_project_work` VALUES (369, '1648881415265976322', '图根点', '图根', '点', '6', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (370, '1648881415265976322', '1:5000地形图测绘', '1:5000', 'km²', '17.34', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (371, '1648881415265976322', '1:2000地形图测绘', '1:2000', 'km²', '6.33', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (372, '1648881415064649729', '五等点', '五等', '点', '8', '2021-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (373, '1648881415219838978', '工程监理', NULL, '项', '1', NULL, NULL, '项目总体费用采用预算管理。');
INSERT INTO `cmc_project_work` VALUES (374, '1648881415047872514', '工程区地形图测绘', '1:2000', 'km²', '4.63', '2021-08-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (375, '1648881415047872514', '施工区地形图测绘', '1:5000', 'km²', '26.85', '2021-08-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (376, '1648881415047872514', '淹没区地形图测绘', '1:5000', 'km²', '3.92', '2021-08-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (377, '1648881415047872514', '无人机数据采集与进出场', NULL, '人.天', '16', '2021-08-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (378, '1648881415047872514', '五等点', '五等', '点', '6', '2021-08-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (379, '1648881414905266178', '武警中队地形图测量', '1:2000', 'km²', '1.08', '2021-09-07', NULL, '后边坡全部测，上游至拦挡坝的位置，拦挡坝要包全（位置可能不准，以现场实际为准）');
INSERT INTO `cmc_project_work` VALUES (380, '1648881414905266178', '武警中队安置场地地形图测量', '1:500', 'km²', '0.074', '2021-09-07', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (381, '1648881414905266178', '华电营地地形图测量', '1:1000', 'km²', '0.7', '2021-09-07', NULL, '以图上圈定边界为准，精度1:1000，场地前缘要反应出大渡河防洪堤位置，即测到河漫滩即可。');
INSERT INTO `cmc_project_work` VALUES (382, '1648881414905266178', '华电营地安置场地地形图测量', '1:500', 'km²', '0.066', '2021-09-07', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (383, '1648881416830451713', '两河口水电站工程测量中心2021年度测绘服务', NULL, '项', '1', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (384, '1648881416901754881', '泸定川藏铁路大桥机载激光扫描', NULL, '项', '1', NULL, NULL, '具体要求按甲方现场安排');
INSERT INTO `cmc_project_work` VALUES (385, '1648881415727349761', '龚嘴电站坝轴线上游1000m库区河道1:1000水下地形图测绘', NULL, 'km²', '0.3', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (386, '1648881415727349761', '龚嘴电站坝下河段1:500水边线测量', NULL, 'km', '2', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (387, '1648881415727349761', '铜街子电站1:1000地形图补测', NULL, 'km²', '0.6', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (388, '1648881415727349761', '铜街子电站坝轴线上游1000m库区河道1:1000水下地形图测绘', NULL, 'km²', '0.3', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (389, '1648881415727349761', '铜街子电站坝下河段1:500水边线测量', NULL, 'km', '1.8', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (390, '1648881415647657985', '地形图测绘', '1:1000', 'km²', '86.92', '2021-06-18', NULL, '预估工作量按实际完成为准');
INSERT INTO `cmc_project_work` VALUES (391, '1648881415844790273', '卧龙安置点1:2000地形地类图测绘', '1:2000', 'km²', '2.5', '2021-05-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (392, '1648881415551188994', 'GNSS测量', '四等', '点', '9', '2021-07-20', NULL, '含联测3个已知点');
INSERT INTO `cmc_project_work` VALUES (393, '1648881415844790273', '帕立地安置点1:2000地形地类图测绘', '1:2000', 'km²', '0.9', '2021-05-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (394, '1648881415844790273', '朗县滨江路1:2000带状地形图（城区）', '1:2000', 'km²', '0.04', '2021-05-17', NULL, '测绘工程中心独立完成');
INSERT INTO `cmc_project_work` VALUES (395, '1648881415844790273', '朗县县城新城区1:2000地形图测绘', '1:2000', 'km²', '0.53', '2021-05-17', NULL, '测绘工程中心独立完成');
INSERT INTO `cmc_project_work` VALUES (396, '1648881415844790273', 'ML电站涉及永久基本农田范围坐标转换', NULL, '项', '1', '2021-05-17', NULL, '测绘工程中心独立完成');
INSERT INTO `cmc_project_work` VALUES (397, '1648881415895121921', '永久界桩主桩制作、搬运、开挖、安装与埋设', NULL, '根', '146', NULL, NULL, '现场具备开工条件下20个工作日淹没区31根，影响区24根，枢纽工程建设区91根，共146根。根据实际情况，可能');
INSERT INTO `cmc_project_work` VALUES (398, '1648881415895121921', '永久界桩、加密界桩制作、搬运、开挖、安装与埋设', NULL, '根', '188', NULL, NULL, '现场具备开工条件下20个工作日淹没区180根，枢纽工程建设区8根，共188根。根据实际情况，可能有所调整。');
INSERT INTO `cmc_project_work` VALUES (399, '1648881415895121921', '临时界桩制作、标识', NULL, '根', '77', NULL, NULL, '现场具备开工条件下20个工作日临时用地、重叠等。');
INSERT INTO `cmc_project_work` VALUES (400, '1648881415895121921', '墙式水位标志牌制作、搬运、开挖、安装与埋设', NULL, '个', '2', NULL, NULL, '现场具备开工条件下20个工作日');
INSERT INTO `cmc_project_work` VALUES (401, '1648881415895121921', '永久界桩、加密桩、墙式标志牌放线与测量', NULL, '点', '409', NULL, NULL, '现场具备开工条件下20个工作日');
INSERT INTO `cmc_project_work` VALUES (402, '1648881415895121921', '界桩点展绘、绘制征地红线图', NULL, '幅', '14', NULL, NULL, '现场具备开工条件下20个工作日；包括界桩编号、坐标位置、高程（设计高程、实测埋高程成果表）及点之记15套');
INSERT INTO `cmc_project_work` VALUES (403, '1648881415727349761', '龚嘴电站1:1000地形图补测', NULL, 'km²', '0.2', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (404, '1648881416029339649', '1:1000横断面测量', '1:1000', 'km', NULL, '2021-04-26', NULL, '116条');
INSERT INTO `cmc_project_work` VALUES (405, '1648881416029339649', '1:1000水边线测量', '1:1000', 'km', '15', '2021-04-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (406, '1648881416029339649', '断面基点测量', NULL, '点', '232', '2021-04-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (407, '1648881416029339649', '1:1000地形图测绘', '1:1000', 'km²', '3.5', '2021-04-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (408, '1648881416029339649', '1:1000水下地形图测绘', '1:1000', 'km²', '0.8', '2021-04-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (409, '1648881416029339649', '原有地形图转换成2000国家大地坐标，高程转成85国家基准', NULL, '点', NULL, '2021-04-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (410, '1648881416029339649', '控制测量', NULL, NULL, NULL, NULL, NULL, '根据情况适当布置');
INSERT INTO `cmc_project_work` VALUES (411, '1648881416029339649', '绰斯甲电站河道视频拍摄', NULL, 'km', '40', '2021-05-15', NULL, '新增，王刚承担');
INSERT INTO `cmc_project_work` VALUES (412, '1648881416029339649', '邓家桥地形图测绘', '1:1000', 'km²', '0.22', '2021-05-25', NULL, '新增，李锋承担外业，吴振承担内业');
INSERT INTO `cmc_project_work` VALUES (413, '1648881415895121921', '绘制界桩测设图', NULL, '项', '1', NULL, NULL, '作为封库令申请要件');
INSERT INTO `cmc_project_work` VALUES (414, '1648881415551188994', '三角高程测量', '四等', 'km', '18', '2021-07-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (415, '1648881415551188994', '地形图测绘', '1:500', 'km²', '0.55', '2021-07-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (416, '1648881415551188994', '对外连接道路地形图测绘', '1:2000', 'km²', '3.8', '2021-07-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (417, '1648881415458914305', '上下水库及输水发电系统地形图', '1:2000', 'km²', '4.7', '2021-08-10', NULL, '含三维地形面制作');
INSERT INTO `cmc_project_work` VALUES (418, '1648881415458914305', '实景三维模型', '1:1000', 'km²', '4.7', NULL, NULL, '三维地形面、实景模型为补充工作内容。');
INSERT INTO `cmc_project_work` VALUES (419, '1648881415240810497', '三等GPS点', '三等', '点', '22', '2021-08-25', NULL, '预估工作时间，完成时间现场协商。');
INSERT INTO `cmc_project_work` VALUES (420, '1648881415240810497', '五等导线三等三角高程', '五等', 'km', '66', '2021-08-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (421, '1648881415240810497', '地形图补测', '1:500', 'km²', '1.55', '2021-08-25', NULL, '预估工作时间，完成时间现场协商。');
INSERT INTO `cmc_project_work` VALUES (422, '1648881415240810497', '中桩放线', NULL, '点', '230', '2021-08-25', NULL, '预估工作时间，完成时间现场协商。中桩预计10米左右一点。');
INSERT INTO `cmc_project_work` VALUES (423, '1648881415240810497', '地形点测量', '地形点', '点', '220', '2021-08-25', NULL, '预估工作时间，完成时间现场协商。');
INSERT INTO `cmc_project_work` VALUES (424, '1648881415240810497', '坐标点转换', '项', '点', '16', '2021-08-25', NULL, '预估工作时间，完成时间现场协商。');
INSERT INTO `cmc_project_work` VALUES (425, '1648881415240810497', '坐标引测', '二等', '点', '6', '2021-08-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (426, '1648881415186284546', '牛棚子沟地形图测绘', '1:500', 'km²', '0.014', '2021-08-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (427, '1648881415186284546', '剖面测量', '1:500', 'km', '1.882', '2021-08-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (428, '1648881415186284546', '特征点', '地形点', '点', '10', '2021-08-25', NULL, '整个项目经费按15个人天计算。');
INSERT INTO `cmc_project_work` VALUES (429, '1648881414976569346', '工程区地形图测绘', '1:5000', 'km²', '9.9', '2021-08-30', NULL, '内业工作委外给中水德方。');
INSERT INTO `cmc_project_work` VALUES (430, '1648881414976569346', '上下水库及输水发电系统地形图测绘', '1:2000', 'km²', '19', '2021-08-30', NULL, '内业工作委外给中水德方。');
INSERT INTO `cmc_project_work` VALUES (431, '1648881414976569346', '无人机航飞', NULL, '项', '1', NULL, NULL, '委托地质测绘院');
INSERT INTO `cmc_project_work` VALUES (432, '1648881415458914305', '工程区地形图', '1:5000', 'km²', '9.6', '2021-08-10', NULL, '含三维地形面制作');
INSERT INTO `cmc_project_work` VALUES (433, '1648881414976569346', '五等点', '五等', '点', '8', '2021-08-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (434, '1648881416603959298', '拉萨河达孜区河段地形图测绘（岸上）', '1:1000', 'km²', '7.5', '2021-02-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (435, '1648881416603959298', '拉萨河达孜区河段地形图测绘（水下）', '1:1000', 'km²', '7.5', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (436, '1648881416603959298', '水工建筑物特征参数测量', '图根', '点', NULL, '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (437, '1648881416603959298', '控制测量', '五等', '点', '10', '2021-02-19', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (438, '1648881416658485250', '环境敏感区GIS层转换到CAD图层', '1:10000', '人.天', '7', '2021-01-25', NULL, '大峡谷保护区、工布自然保护区、色季拉森林公园、雅尼湿地公园');
INSERT INTO `cmc_project_work` VALUES (439, '1648881416226471938', '岩角坝土料场地形图测绘', '1:500', 'km²', '0.14', '2021-03-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (440, '1648881416226471938', '控制点测量', '五等', '点', '3', '2021-03-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (441, '1648881416213889025', '地形地类图修补测', '1:2000', 'km²', '25.5', '2021-04-16', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (442, '1648881416213889025', '铁塔、房屋结构等地物调绘', NULL, 'km²', '280', '2021-03-31', NULL, '现场与路桥专业落实工作内容与要求');
INSERT INTO `cmc_project_work` VALUES (443, '1648881416213889025', 'GNSS测量', '三等', '点', '10', '2021-04-23', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (444, '1648881416213889025', '导线测量（代替四等三角高程）', '五等/四等', 'km', '25', '2021-04-23', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (445, '1648881416213889025', '公路放线测量', NULL, 'km', NULL, NULL, NULL, '按客户要求施测');
INSERT INTO `cmc_project_work` VALUES (446, '1648881416213889025', '公路控制网测量', NULL, '点', NULL, NULL, NULL, '按客户要求施测');
INSERT INTO `cmc_project_work` VALUES (447, '1648881416163557378', '库区2254m高程线提取及辅助路坐标转换（转成2000国家大地坐标及SHP文件）', NULL, '点', NULL, '2021-03-26', NULL, '陈尚云转');
INSERT INTO `cmc_project_work` VALUES (448, '1648881416083865601', '双江口水电站枢纽工程上下游河道1：1000地形图测绘', '1:1000', 'km²', '2', '2019-12-31', NULL, '项目已完成，补登记');
INSERT INTO `cmc_project_work` VALUES (449, '1648881416163557378', '八窝龙施工场地地形图补测', '1:500', 'km²', '0.26', '2021-04-09', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (450, '1648881415962230785', '地形图测绘', '1:500', 'km²', '0.2', '2021-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (451, '1648881416213889025', '枢纽区地形地类图测绘', '1:2000', 'km²', '117.2', '2021-04-16', NULL, '其中基础分公司3块43.35km²，3月31日提交成果');
INSERT INTO `cmc_project_work` VALUES (452, '1648881415962230785', '中桩放线', NULL, 'km', '6.54', '2021-04-30', NULL, '沿江道路【K0+000.00～K9+688.00段】、1#公路【K4+220.00~K5+521.88段】、5#公路【K0+000.00～K0+876.00段');
INSERT INTO `cmc_project_work` VALUES (453, '1648881415861567490', '1:1000水边线测量', '1:1000', 'km', '1.9', '2021-05-14', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (454, '1648881415861567490', '洪调点测量', NULL, '点', '12', '2021-05-14', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (455, '1648881415861567490', '涉河建筑设施测量', NULL, '项', '1', '2021-05-14', NULL, '根据用户要求施测');
INSERT INTO `cmc_project_work` VALUES (456, '1648881415861567490', '松岗大桥现状测量', NULL, '项', '1', '2021-05-14', NULL, '根据用户要求施测');
INSERT INTO `cmc_project_work` VALUES (457, '1648881415861567490', '邓家桥地形图测绘', '1:1000', 'km²', '0.23', '2021-05-31', NULL, '变更新增，李锋外业、吴振内业');
INSERT INTO `cmc_project_work` VALUES (458, '1648881415362445314', '配合开展国家级核查和数据库质检入库', NULL, '项', '1', '2021-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (459, '1648881415362445314', '分析汇总调查成果及验收', NULL, '项', '1', '2021-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (460, '1648881415861567490', '1:500横断面测量', '1:500', 'km', '3.6', '2021-05-14', NULL, '18条，平均长度暂按200m/条计');
INSERT INTO `cmc_project_work` VALUES (461, '1648881414951403522', '断面测量', '1:1000', 'km', '16.2', '2021-10-31', NULL, '43条断面，断面CS01~CS10预估长度300m，剩余部分断面预估每条400m');
INSERT INTO `cmc_project_work` VALUES (462, '1648881414951403522', '断面基点', NULL, '点', '86', '2021-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (463, '1648881414926237697', '库区地形地类图测绘', '1:2000', 'km²', '238.75', '2021-11-30', NULL, '分段按3200、3100高程控制');
INSERT INTO `cmc_project_work` VALUES (464, '1648881414951403522', '拉哇库尾地形图测量', '1:1000', 'km²', '2', '2021-08-31', NULL, '需与原叶巴滩水电站地形图接边。');
INSERT INTO `cmc_project_work` VALUES (465, '1648881414926237697', '施工输电地形图测绘', '1:2000', 'km²', '37.11', '2021-11-30', NULL, '实际要求面积为53.2km²，扣除枢纽区、移民专业已测地形图后，实际增加测绘37.11km²。');
INSERT INTO `cmc_project_work` VALUES (466, '1648881414926237697', '公路地形图测绘', '1:2000', 'km²', '186.52', '2021-11-30', NULL, '实际要求面积为560.5km²，扣除包含枢纽区136.67km²、施工输电9.89km²、移民专业227.42km²，实际增加测绘186');
INSERT INTO `cmc_project_work` VALUES (467, '1648881414926237697', '地形图测绘', '1:2000', 'km²', '29.73', '2021-11-30', NULL, '实际要求面积为551.99km²，扣除包含枢纽区、施工、移民、交通专业范围后，实际增加测绘29.73km²。');
INSERT INTO `cmc_project_work` VALUES (468, '1648881414926237697', '坝址区地形图测绘', '1:1000', 'km²', '42.50', '2021-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (469, '1648881414926237697', '坝址区河段三维地形面制作', '1:2000', 'km²', '248.91', '2021-11-30', NULL, '利用已测地形图制作三维地形面');
INSERT INTO `cmc_project_work` VALUES (470, '1648881414926237697', '拉林铁路影响评价区地形图测绘', '1:500', 'km²', '6.24', '2021-11-30', NULL, '12处');
INSERT INTO `cmc_project_work` VALUES (471, '1648881414926237697', '坐标转换（转成2000国家大地坐标）', NULL, '点', '146', '2021-11-30', NULL, '米林两岸公路（左右岸）、CD A484 YK-13-20-10（7）米林施工总布置图');
INSERT INTO `cmc_project_work` VALUES (472, '1648881414926237697', '公路测量', NULL, 'km', '13.67', '2021-11-30', NULL, '右岸约8.23km，左岸5.44km，按每公里2000计费，困难系数另计。');
INSERT INTO `cmc_project_work` VALUES (473, '1648881414926237697', '特征点测量', '地形点', '点', '784', '2021-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (474, '1648881414812991489', '三维地形面制作', '1:5000', 'km²', '20.96', '2021-09-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (475, '1648881414812991489', '三维地形面制作', '1:2000', 'km²', '10.69', '2021-09-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (476, '1648881414812991489', '工程区地形图测绘', '1:5000', 'km²', '20.96', '2021-09-20', NULL, '包含1：2000地形图范围');
INSERT INTO `cmc_project_work` VALUES (477, '1648881414926237697', '居民点地形地类图测绘', '1:1000', 'km²', '2.50', '2021-11-30', NULL, '扎西绕登集镇帕立地新址、里龙集镇色比单噶新址、卧龙集镇嘎加村新址、洞嘎集镇后靠新址、扎村居民点新址、');
INSERT INTO `cmc_project_work` VALUES (478, '1648881414926237697', '地形地类图测绘', '1:2000', 'km²', '3.84 ', '2021-11-30', NULL, '卧龙、帕立地、朗县滨江路、朗县县城新城区等4块');
INSERT INTO `cmc_project_work` VALUES (479, '1648881414926237697', 'ML电站涉及永久基本农田范围坐标转换', NULL, '点', '2444', '2021-11-30', NULL, '米林县、朗县、巴宜区');
INSERT INTO `cmc_project_work` VALUES (480, '1648881414926237697', '土料运输线路地形图测绘', '1:2000', 'km²', '1', '2021-09-20', NULL, '范围面积25.7 ，扣除其他专业范围，补测测约1平方公里');
INSERT INTO `cmc_project_work` VALUES (481, '1648881414926237697', '无人机飞行', NULL, '人.天', '90', '2021-09-30', NULL, '飞行预计3人一个月。');
INSERT INTO `cmc_project_work` VALUES (482, '1648881414926237697', '北沟正常蓄水位以上1：2000地形图测绘', '1:2000', 'km²', '0', '2021-09-20', NULL, '范围面积1.93，包含在枢纽区范围内');
INSERT INTO `cmc_project_work` VALUES (483, '1648881414812991489', '上下水库及输水发电系统地形图测绘', '1:2000', 'km²', '10.69', '2021-09-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (484, '1648881414657802242', '横断面测量', '1:500', 'km', '1.96', '2021-10-23', NULL, '3条');
INSERT INTO `cmc_project_work` VALUES (485, '1648881414657802242', '拦污栅库段地形图测绘', '1:500', 'km²', '1.89', '2021-10-23', NULL, '水下按机动船配合RTK计费，');
INSERT INTO `cmc_project_work` VALUES (486, '1648881414657802242', '断面基点', '五等/四等', '点', '6', '2021-10-23', NULL, '按埋石计费');
INSERT INTO `cmc_project_work` VALUES (487, '1648881414657802242', '外业进出场', NULL, '人.天', '6', '2021-10-23', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (488, '1648881414657802242', '控制点测量', '图根', '点', '4', '2021-09-23', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (489, '1648881414624247809', '风电场区域地形图测绘', '1:2000', 'km²', '52', '2021-10-25', NULL, '电子版不晚于2021年10月20日；最终测绘成果报告不晚于2021年10月25日。');
INSERT INTO `cmc_project_work` VALUES (490, '1648881414624247809', '风电机组及升压站地形图测绘', '1:500', 'km²', '1.625', NULL, NULL, '与1:2000的地形图同时开展，完成时间待定，需与用户沟通协调。');
INSERT INTO `cmc_project_work` VALUES (491, '1648881414565527553', '五等控制点', NULL, '点', '6', '2021-10-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (492, '1648881414565527553', '工程区1:5000地形图测绘', '1:5000', 'km²', '14.4', '2021-10-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (493, '1648881414565527553', '1:2000地形图缩编成1:5000地形图', '1:5000', 'km²', '13.8', '2021-10-25', NULL, '下库拟采用向家坝水库，但需要工程范围内的下水库边界测出来');
INSERT INTO `cmc_project_work` VALUES (494, '1648881414565527553', '上水库及输水发电系统区地形图测绘', '1:2000', 'km²', '13.8', '2021-10-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (495, '1648881414565527553', '三维地形面制作', '1:5000', 'km²', '14.4', '2021-10-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (496, '1648881414565527553', '三维地形面制作', '1:2000', 'km²', '13.8', '2021-10-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (497, '1648881414313869314', '莫汝弄巴泥石流沟1:1000地形图测绘', '1:1000', 'km²', '0.73', '2021-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (498, '1648881414313869314', '卡许料场1:1000地形地类图测绘', '1:1000', 'km²', '0.3', '2021-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (499, '1648881414313869314', '零星配合工作', '人/天', NULL, '15', '2021-11-30', NULL, '由吴振部门完成，后补登记');
INSERT INTO `cmc_project_work` VALUES (500, '1648881416935309313', '断面基点复测、维护及断面测量、淤积分析', NULL, '项', '1', '2021-03-11', NULL, '项目总体委托费用');
INSERT INTO `cmc_project_work` VALUES (501, '1648881416973058050', '地形图测绘（含水下地形）', '1:1000', 'km²', '0.39', '2021-02-10', NULL, '水流急不能测绘水下地形河段，只测绘水边线');
INSERT INTO `cmc_project_work` VALUES (502, '1648881416973058050', '同时水面线测量', '1:500', 'km', '2.0', '2021-02-10', NULL, '测点要求密集，必须换算成同时水位，并说明测量时间');
INSERT INTO `cmc_project_work` VALUES (503, '1648881416973058050', '猴子岩大桥下游约200m处横断面测量', '1:500', 'km', '0.3', '2021-02-10', NULL, '记录测量时间、基点坐标及猴子岩同时刻出库流量');
INSERT INTO `cmc_project_work` VALUES (504, '1648881416973058050', '猴子岩尾水出口横断面测量', '1:500', 'km', '0.3', '2021-02-10', NULL, '记录测量时间及同时刻尾水发电流量');
INSERT INTO `cmc_project_work` VALUES (505, '1648881416973058050', '断面基点', '五等', '点', '4', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (506, '1648881416973058050', '无人机飞行', NULL, '人.天', '2', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (507, '1648881416973058050', '外业进出场', NULL, '人.天', '8', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (508, '1648881416641708034', '大渡河猴子岩水电站外部变形监测', NULL, '项', '1', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (509, '1648881416620736513', '清理河流现状', NULL, '项', '1', '2021-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (510, '1648881416620736513', '绘制工作底图', NULL, '项', '1', '2021-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (511, '1648881416620736513', '定界树桩', NULL, '项', '1', '2021-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (512, '1648881416620736513', '洪水分析', NULL, '项', '1', '2021-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (513, '1648881416620736513', '成果运用', NULL, '项', '1', '2021-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (514, '1648881416620736513', '检查验收', NULL, '项', '1', '2021-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (515, '1648881416499101698', '控制点测设', '五等', '点', '6', '2021-02-10', NULL, '水源地、料场各3点');
INSERT INTO `cmc_project_work` VALUES (516, '1648881416499101698', '三角高程测量', '四等', 'km', '3', '2021-02-10', NULL, '控制点之间三角高程测量');
INSERT INTO `cmc_project_work` VALUES (517, '1648881416499101698', '江热村料场地形图测绘', '1:1000', 'km²', '0.15', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (518, '1648881416499101698', '引水路线地形图测绘', '1:1000', 'km²', '0.7', '2021-02-10', NULL, '范围包括水沟和道路，两侧各外扩10m');
INSERT INTO `cmc_project_work` VALUES (519, '1648881416499101698', '取水口地形图测绘', '1:500', 'km²', '0.1', '2021-02-10', NULL, '标定位置');
INSERT INTO `cmc_project_work` VALUES (520, '1648881416427798530', '水库区地形图测绘', '1:10000', 'km²', '94', '2021-02-28', NULL, '含水下地形');
INSERT INTO `cmc_project_work` VALUES (521, '1648881416427798530', '坝址区地形图测绘', '1:2000', 'km²', '23', '2021-02-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (522, '1648881416427798530', 'GNSS测量', '三等', '点', '10', '2021-02-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (523, '1648881416427798530', '导线测量（代替四等高程）', '五等/四等', 'km', '20', '2021-02-28', NULL, '现场根据需要布设');
INSERT INTO `cmc_project_work` VALUES (524, '1648881416427798530', '断面测量', NULL, NULL, NULL, NULL, NULL, '现场联系甲方确定');
INSERT INTO `cmc_project_work` VALUES (525, '1648881416465547266', '厂址区地形地类图测量', '1:2000', 'km²', '25.7', '2021-03-15', NULL, '已有地形图缩编、补齐并外业修补测地形、地类');
INSERT INTO `cmc_project_work` VALUES (526, '1648881416411021314', '厂址区地形地类图测绘', '1:2000', 'km²', '18.0', '2021-04-30', NULL, '已有地形图缩编、补齐并外业修补测地形、地类');
INSERT INTO `cmc_project_work` VALUES (527, '1648881416360689665', '地形图测绘', '1:500', 'km²', '0.3', '2021-03-09', NULL, '3块地方，范围测至大渡河水边线');
INSERT INTO `cmc_project_work` VALUES (528, '1648881415878344705', '直白至扎曲地形图测绘（环保）', '1:2000', 'km²', '89', '2021-06-30', NULL, '利用已有激光数据；子公司、地理信息中心承担内业');
INSERT INTO `cmc_project_work` VALUES (529, '1648881415878344705', '多雄河至背崩地形图（施工）', '1:2000', 'km²', '122.42', '2021-06-30', NULL, '利用已有激光数据及已有地形图；');
INSERT INTO `cmc_project_work` VALUES (530, '1648881415878344705', '多雄河至背崩地形图（地质）', '1:2000', 'km²', '103.70', '2021-06-30', NULL, '利用已有激光数据及已有地形图；提交地形图及地面点云成果');
INSERT INTO `cmc_project_work` VALUES (531, '1648881415748321281', '孔玉乡菩提河坝地形图测绘', '1:500', 'km²', '0.1', '2021-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (532, '1648881415748321281', '孔玉乡折洛沟新取水口及引水线路地形图测绘', '1:500', 'km²', '0.1', '2021-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (533, '1648881415748321281', '控制点测量', '图根', '点', '9', '2021-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (534, '1648881415685406721', '枢纽工程三维地形面', '1:500', 'km²', '4.848', '2021-06-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (535, '1648881415748321281', '孔玉乡泥洛河坝地形图测绘', '1:500', 'km²', '0.1', '2021-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (536, '1648881415668629506', '三角高程测量', '四等', 'km', '12', '2021-06-17', NULL, '计划量');
INSERT INTO `cmc_project_work` VALUES (537, '1648881415668629506', '礼约河地形图测绘', '1:2000', 'km²', '5.1', '2021-06-07', NULL, '利用公共数据制作。');
INSERT INTO `cmc_project_work` VALUES (538, '1648881415668629506', '礼约河地形图测绘', '1:2000', 'km²', '5.1', '2021-06-17', NULL, '礼约河沿河10km，高程按照1400m控制。');
INSERT INTO `cmc_project_work` VALUES (539, '1648881415630880769', '地形图测绘', '1:500', 'km²', '0.15', '2021-07-09', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (540, '1648881415668629506', 'GNSS测量', '四等', '点', '6', '2021-06-17', NULL, '计划量');
INSERT INTO `cmc_project_work` VALUES (541, '1648881415630880769', '垫高防护区地形图测绘', '1:1000', 'km²', '1.22', '2021-07-09', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (542, '1648881415588937730', '无人机激光采集', '1:2000', 'km', '170', '2021-07-20', NULL, '飞行宽度不少于公路两侧各400米');
INSERT INTO `cmc_project_work` VALUES (543, '1648881415588937730', '高速公路控制测量', '四等', 'km', '170', '2021-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (544, '1648881415588937730', '地形图外业调绘', '1:2000', 'km', '80', '2021-07-30', NULL, '工作量为路线长度');
INSERT INTO `cmc_project_work` VALUES (545, '1648881415446331394', '地形测绘（全流域）', '1:2000', 'km²', '3', '2021-07-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (546, '1648881415446331394', '地形测绘（打罗桥以下-雅砻江）', '1:500', 'km²', '0.04', '2021-07-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (547, '1648881415446331394', '流域正射影像大图制作', '1:2000', 'km²', '3', '2021-07-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (548, '1648881415446331394', 'GNSS测量', '五等', '点', '10', '2021-07-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (549, '1648881415446331394', '金打公路k6+750泥石流地形测绘', '1:500', 'km²', '0.02', '2021-07-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (550, '1648881415446331394', '竹子坝西侧沟取水口地形测绘', '1:500', 'km²', '0.03', '2021-07-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (551, '1648881415333085186', '坝址区三维地形面制作', '1:1000', 'km²', '1.5', '2021-07-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (552, '1648881415362445314', '收集整理自然资源管理数据', NULL, '项', '1', '2021-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (553, '1648881415362445314', '7制作外业调查电子底图', NULL, '项', '1', '2021-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (554, '1648881415362445314', '图斑调查农村土地利用现状变化及举证', NULL, '项', '1', '2021-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (555, '1648881421427408898', '两河口水电站工程测量中心2019年度测绘服务', NULL, '项', '1', '2019-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (556, '1648881421460963330', '两河口移民代建工程施工测量2019年度测绘服务', NULL, '项', '1', '2019-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (557, '1648881416864006146', '双江口水电站枢纽工程测量中心2021年度测绘服务', NULL, '项', '1', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (558, '1648881416742371330', '首部枢纽地形图测绘', '1:500', 'km²', '0.57', '2021-02-22', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (559, '1648881416742371330', '风草沟渣场地形图测绘', '1:500', 'km²', '0.47', '2021-02-22', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (560, '1648881416742371330', '猴子沟渣场地形图测绘', '1:500', 'km²', '0.14', '2021-02-22', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (561, '1648881416742371330', '亚拉沟渣场地形图测绘', '1:500', 'km²', '0.16', '2021-02-22', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (562, '1648881416742371330', '果儿巫沟渣场地形图测绘', '1:500', 'km²', '0.10', '2021-02-22', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (563, '1648881416742371330', '巴郎村渣场地形图测绘', '1:500', 'km²', '0.26', '2021-02-22', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (564, '1648881416742371330', '外业激光数据采集', NULL, '项', '1', '2021-01-29', NULL, '委外');
INSERT INTO `cmc_project_work` VALUES (565, '1648881416742371330', '外业调绘补测', '1:500', 'km²', NULL, '2021-01-29', NULL, '外业由巴拉测量中心承担');
INSERT INTO `cmc_project_work` VALUES (566, '1648881416536850434', '金阳一标段地形图测绘', '1:500', 'km²', '0.34', '2021-02-10', NULL, '4块地方,热水河隧道进口、出口区域和下寨沿江隧道进口、出口区域');
INSERT INTO `cmc_project_work` VALUES (567, '1648881416536850434', '金阳四标溜砂坡地形图测绘', '1:500', 'km²', '0.24', '2021-02-10', NULL, '岩头隧道溜砂坡区域');
INSERT INTO `cmc_project_work` VALUES (568, '1648881416536850434', '雷波县岩湾隧道进口、出口地形图测绘', '1:500', 'km²', '0.37', '2021-02-10', NULL, '岩湾隧道进口、出口区域');
INSERT INTO `cmc_project_work` VALUES (569, '1648881416536850434', '隧道进出口附近控制点测量', '五等/四等', '点', NULL, '2021-02-10', NULL, '根据现场情况适当留点');
INSERT INTO `cmc_project_work` VALUES (570, '1648881416536850434', '金阳六标春江桥1:500地形图测绘', '1:500', 'km²', '0.07', '2021-02-10', NULL, '春江桥附近区域');
INSERT INTO `cmc_project_work` VALUES (571, '1648881416377466882', '五等导线测量', '五等', 'km', '86', '2021-05-31', NULL, '预估工作量');
INSERT INTO `cmc_project_work` VALUES (572, '1648881416377466882', 'GNSS测量', '三等', '点', '38', '2021-05-31', NULL, '经与技术部、项目管理部沟通，按三等观测');
INSERT INTO `cmc_project_work` VALUES (573, '1648881416377466882', '三等高程测量', '三等', 'km', '86', '2021-05-31', NULL, '预估工作量');
INSERT INTO `cmc_project_work` VALUES (574, '1648881416377466882', '界桩放样与测量', NULL, '点', '1000', '2021-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (575, '1648881416377466882', '实物指标配合测量', NULL, '人.天', '300', '2021-05-31', NULL, '预估工作量');
INSERT INTO `cmc_project_work` VALUES (576, '1648881416343912449', '产卵场水下地形图测绘', '1:1000', 'km²', '0.35', '2021-03-31', NULL, '2块地方');
INSERT INTO `cmc_project_work` VALUES (577, '1648881416343912449', '控制点测量', '五等', '点', '6', '2021-03-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (578, '1648881416327135233', '紫霞水电站公路配合测量', NULL, '人.天', '14', '2021-03-22', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (579, '1648881416243249154', '地形图测绘', '1:2000', 'km²', '1.68', '2021-03-18', NULL, '7日历天');
INSERT INTO `cmc_project_work` VALUES (580, '1648881416243249154', '控制测量（GPS）E级网', 'E级', '点', '3', '2021-03-18', NULL, '7日历天');
INSERT INTO `cmc_project_work` VALUES (581, '1648881416243249154', '工程点及矿权拐点测量', NULL, '点', '40', '2021-03-18', NULL, '7日历天');
INSERT INTO `cmc_project_work` VALUES (582, '1648881416243249154', '勘探基线测量', NULL, 'km', '7', '2021-03-18', NULL, '7日历天');
INSERT INTO `cmc_project_work` VALUES (583, '1648881416679456770', '测量中心技术服务（2021年度）', NULL, '项', '1', '2021-12-31', NULL, '项目年度整体委托管理费用');
INSERT INTO `cmc_project_work` VALUES (584, '1648881416117420033', '四等GNSS测量', '四等', '点', '10', '2021-04-09', NULL, '根据需要选择，利用旧点两点，埋石。');
INSERT INTO `cmc_project_work` VALUES (585, '1648881416117420033', '四等三角高程测量', '四等', 'km', '8', '2021-04-09', NULL, '根据需要选择');
INSERT INTO `cmc_project_work` VALUES (586, '1648881416117420033', '红顶村至红顶集镇地形图测绘', '1:1000', 'km²', '0.8', '2021-04-09', NULL, '线路长预计8km，宽度平均预计100m，带状');
INSERT INTO `cmc_project_work` VALUES (587, '1648881416197111809', 'GNSS测量', '三等', '点', '46', '2021-06-30', NULL, '按实际需要布测');
INSERT INTO `cmc_project_work` VALUES (588, '1648881416197111809', '雅尼湿地公园河段部分地形图测绘', '1:1000', 'km²', '78.28', '2021-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (589, '1648881416197111809', '雅尼湿地补充上部河段地形图测绘', '1:1000', 'km²', '4.68', '2021-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (590, '1648881416197111809', '林芝机场段地形图测绘', '1:1000', 'km²', '2.38', '2021-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (591, '1648881416197111809', '林芝机场上游局部河段地形图测绘', '1:1000', 'km²', '7', '2021-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (592, '1648881416197111809', '米林坝下-尼洋河口-直白段地形图测绘', '1:2000', 'km²', '280.06', '2021-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (593, '1648881416197111809', '地形图缩编', '1:2000', 'km²', '92.34', '2021-06-30', NULL, '1:1000地形图缩编为1:2000');
INSERT INTO `cmc_project_work` VALUES (594, '1648881416197111809', '外业数据采集', NULL, 'km²', '372.4', '2021-05-15', NULL, '激光数据、倾斜摄影');
INSERT INTO `cmc_project_work` VALUES (595, '1648881416146780162', '地形图测绘（内业航测）', '1:2000', 'km²', '6.49', '2021-04-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (596, '1648881416197111809', 'GNSS测量', '一等', '点', '3', '2021-06-30', NULL, '按实际需要布测');
INSERT INTO `cmc_project_work` VALUES (597, '1648881416146780162', '地形图外业调绘、修补测', '1:2000', 'km²', '12.69', '2021-05-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (598, '1648881416100642818', '乌尤寺水文站高程系统转换', NULL, '点', NULL, '2021-04-08', NULL, '1个点多年成果');
INSERT INTO `cmc_project_work` VALUES (599, '1648881416100642818', '现场坐标高程联测', NULL, '点', NULL, '2021-04-08', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (600, '1648881416146780162', '地形图测绘（内业航测）', '1:2000', 'km²', '6.2', '2021-04-01', NULL, '委托云南省遥感中心');
INSERT INTO `cmc_project_work` VALUES (601, '1648881416012562433', '多雄拉越岭隧道范围地类地形图', '1:2000', 'km²', '8.5', '2021-05-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (602, '1648881415832207361', '场址地形图测绘', '1:2000', 'km²', '5.716', '2021-05-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (603, '1648881415815430146', '施工监测', NULL, '项', '1', '2024-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (604, '1648881415815430146', '控制测量', NULL, '项', '1', '2024-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (605, '1648881415798652929', '淹没区1:5000地形地类图测绘', '1:5000', 'km²', '27.25', '2021-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (606, '1648881415798652929', '集镇新址1:2000地形地类图测绘', '1:2000', 'km²', '0.2', '2021-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (607, '1648881415765098497', '石鼓村灰场环保整治项目“临时封场”1:500地形图测绘', '1:500', 'km²', '0.69', '2021-05-19', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (608, '1648881418940186626', '两河口移民代建工程施工测量2020年度测绘服务', NULL, '项', '1', '2020-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (609, '1648881416721399809', '汉源县城主次干路地形图测绘（带状）', '1:200', 'km²', '0.65', '2021-02-10', NULL, '各项工作内容计要求，按《汉源移民后续项目测量范围及要求》执行');
INSERT INTO `cmc_project_work` VALUES (610, '1648881416721399809', '裸露边坡地形图测绘', '1:500', 'km²', '0.35', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (611, '1648881416721399809', '万里工业园区范家沟道路地形图测绘（带状）', '1:500', 'km²', '0.13', '2021-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (612, '1648881416721399809', '移民增收项目1:200地形图测绘（暂做试点）', '1:200', 'km²', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (613, '1648881416293580802', '扯索坝取水口及跨沟段地形图测绘', '1:500', 'km²', NULL, '2021-03-22', NULL, '带状，长约180m， 宽约50m');
INSERT INTO `cmc_project_work` VALUES (614, '1648881416293580802', '扯索坝垮塌段地形图测绘', '1:500', 'km²', NULL, '2021-03-22', NULL, '带状，长约50m，  宽约30m');
INSERT INTO `cmc_project_work` VALUES (615, '1648881416293580802', '扯索坝净水厂及高位水池地形图测绘', '1:500', 'km²', NULL, '2021-03-22', NULL, '带状，长约300m， 宽约80m');
INSERT INTO `cmc_project_work` VALUES (616, '1648881416293580802', '二里坝取水枢纽地形图测绘', '1:500', 'km²', NULL, '2021-03-22', NULL, '带状，长约460m， 宽约80m');
INSERT INTO `cmc_project_work` VALUES (617, '1648881416293580802', '二里坝取水枢纽地形图测绘', '1:500', 'km²', NULL, '2021-03-22', NULL, '带状，长约140m， 宽约120m');
INSERT INTO `cmc_project_work` VALUES (618, '1648881416293580802', '冷碛防护工程地形图测绘', '1:500', 'km²', NULL, '2021-03-22', NULL, '带状，长约1600m，宽约60m');
INSERT INTO `cmc_project_work` VALUES (619, '1648881416293580802', '泸定二中塌岸防护工程地形图测绘', '1:500', 'km²', NULL, '2021-03-22', NULL, '带状，长约750m， 宽约100m');
INSERT INTO `cmc_project_work` VALUES (620, '1648881415781875714', '四等GNSS测量', '四等', '点', '8', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (621, '1648881415781875714', '五等导线测量（代替四等三角高程）', '五等/四等', 'km', '5', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (622, '1648881415911899138', '绘制界桩测设图', NULL, '项', '1', NULL, NULL, '作为封库令申请要件');
INSERT INTO `cmc_project_work` VALUES (623, '1648881415911899138', '永久界桩主桩制作、搬运、开挖、安装与埋设', NULL, '根', '242', NULL, NULL, '现场具备开工条件下20个工作日淹没区39根，影响区125根，枢纽工程建设区78根，共242根。根据实际情况，可能');
INSERT INTO `cmc_project_work` VALUES (624, '1648881415911899138', '永久界桩、加密界桩制作、搬运、开挖、安装与埋设', NULL, '根', '243', NULL, NULL, '现场具备开工条件下20个工作日淹没区228根，枢纽工程建设区15根，共243根。根据实际情况，可能有所调整。');
INSERT INTO `cmc_project_work` VALUES (625, '1648881415911899138', '临时界桩制作、标识', NULL, '根', '83', NULL, NULL, '现场具备开工条件下20个工作日临时用地、重叠等。');
INSERT INTO `cmc_project_work` VALUES (626, '1648881415911899138', '墙式水位标志牌制作、搬运、开挖、安装与埋设', NULL, '个', '2', NULL, NULL, '现场具备开工条件下20个工作日');
INSERT INTO `cmc_project_work` VALUES (627, '1648881416130002945', '地形图补充测绘', '1:2000', 'km²', '48', '2021-04-30', NULL, '其中44平方公里委托云南省遥感中心内业测图');
INSERT INTO `cmc_project_work` VALUES (628, '1648881416130002945', '地形图调绘、修补测', '1:2000', 'km²', '48', '2021-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (629, '1648881416130002945', '地形图编辑', '1:2000', 'km²', '48', '2021-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (630, '1648881416130002945', 'GNSS点测量', '一级', '点', NULL, '2021-04-30', NULL, '按公路规范布设，包括联测另外2条高速公路控制点');
INSERT INTO `cmc_project_work` VALUES (631, '1648881416130002945', '三角高程测量', '三等', 'km', NULL, '2021-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (632, '1648881415949647874', '永善库区新增滑坡影响区实物指标调查配合测量', NULL, '人.天', NULL, '2021-06-30', NULL, '完成后一定要配合工作单');
INSERT INTO `cmc_project_work` VALUES (633, '1648881415979008002', '平面观测墩选点和建造(重建）', '三等', '点', '6', '2021-05-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (634, '1648881415979008002', '边角网观测', '三等', '点', '6', '2021-05-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (635, '1648881415979008002', '三等三角高程测量', '三等', 'km', '5.6', '2021-05-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (636, '1648881415979008002', '三等GPS引测', '三等', '点', '6', '2021-05-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (637, '1648881415979008002', '三等三角高程引测', '三等', 'km', '2.8', '2021-05-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (638, '1648881416062894082', '大桑水电站施工用地范围图坐标转换（转换成2000国家大地坐标系）', NULL, '点', NULL, NULL, NULL, '转图及图纸表格中坐标点');
INSERT INTO `cmc_project_work` VALUES (639, '1648881416062894082', '大桑水电站水库淹没影响区打桩定界图坐标转换（转换成2000国家大地坐标系）', NULL, '点', NULL, NULL, NULL, '转图及图纸表格中坐标点');
INSERT INTO `cmc_project_work` VALUES (640, '1648881416062894082', '大桑水电站施工用地范围图及水库淹没影响区打桩定界图ARCGIS数据库SHP文件制作', NULL, '点', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (641, '1648881416062894082', '二瓦槽水电站施工用地范围图坐标转换（转换成2000国家大地坐标系）', NULL, '点', NULL, NULL, NULL, '转图及图纸表格中坐标点');
INSERT INTO `cmc_project_work` VALUES (642, '1648881416062894082', '二瓦槽水电站水库淹没影响区打桩定界图坐标转换（转换成2000国家大地坐标系）', NULL, '点', NULL, NULL, NULL, '转图及图纸表格中坐标点');
INSERT INTO `cmc_project_work` VALUES (643, '1648881415765098497', 'E级GNSS测量', 'E级', '点', NULL, '2021-05-19', NULL, '根据现场情况选做');
INSERT INTO `cmc_project_work` VALUES (644, '1648881415765098497', '四等三角高程测量', '四等', 'km', NULL, '2021-05-19', NULL, '根据现场情况选做');
INSERT INTO `cmc_project_work` VALUES (645, '1648881415781875714', '升压站1:500地形图测绘', '1:500', 'km²', NULL, NULL, NULL, '提供2套坐标成果，原坐标系和国家2000大地坐标系');
INSERT INTO `cmc_project_work` VALUES (646, '1648881415911899138', '永久界桩、加密桩、墙式标志牌放线与测量', NULL, '点', '566', NULL, NULL, '现场具备开工条件下20个工作日');
INSERT INTO `cmc_project_work` VALUES (647, '1648881415911899138', '界桩点展绘、绘制征地红线图', NULL, '幅', '16', NULL, NULL, '现场具备开工条件下20个工作日；包括界桩编号、坐标位置、高程（设计高程、实测埋高程成果表）及点之记15套');
INSERT INTO `cmc_project_work` VALUES (648, '1648881416062894082', '转换点采集', '五等', '点', NULL, NULL, NULL, '按五等精度，预计大桑采集6点，二瓦槽8点，共计14点');
INSERT INTO `cmc_project_work` VALUES (649, '1648881416062894082', '二瓦槽水电站施工用地范围图及水库淹没影响区打桩定界图ARCGIS数据库SHP文件制作', NULL, '点', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (650, '1648881416062894082', '地形图现场校核', NULL, '人.天', '3', NULL, NULL, '张远锋承担。根据地形图转换发现问题新增工作。');
INSERT INTO `cmc_project_work` VALUES (651, '1648881415609909250', ' 转换点云及DEM制作', '1:2000', 'km²', '156.3', '2021-06-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (652, '1648881415567966210', '降曲河无人机航拍实景三维模型', '1:1000', 'km²', '4.3', '2021-06-18', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (653, '1648881415567966210', '坝址枢纽区、引尾水线路区、俄德西沟料场区地形图坐标转换', NULL, '处', '3', '2021-06-18', NULL, '由航测遥感中心完成');
INSERT INTO `cmc_project_work` VALUES (654, '1648881415513440258', 'G4216线屏山新市至金阳段永善支线地形图补测', '1:2000', 'km²', '0.6', '2021-07-15', NULL, '内业补测');
INSERT INTO `cmc_project_work` VALUES (655, '1648881415609909250', '地形图补测（内业）', '1:2000', 'km²', '0.66', '2021-06-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (656, '1648881415567966210', '降曲河1:1000地形图测绘', '1:1000', 'km²', '4.3', '2021-06-18', NULL, '与现场李崇标13518196845联系');
INSERT INTO `cmc_project_work` VALUES (657, '1648881415492468738', '二等GNSS平面控制网引测', '二等', '点', '8', '2021-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (658, '1648881415492468738', '三等高程引测', '三等', 'km', '100', '2021-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (659, '1648881417006612482', '倾斜摄影', NULL, '项', '1', '2021-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (660, '1648881417006612482', '二滩水电站工程枢纽区及右岸公路地质灾害区实景三维模型制作', '1:500', 'km²', '3', '2021-02-05', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (661, '1648881417006612482', '桐子林水电站工程枢纽区及右岸公路地质灾害区实景三维模型制作', '1:500', 'km²', '2', '2021-02-05', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (662, '1648881416700428290', '坝区1:1000地形图转成2000国家大地坐标', '1:1000', '项', '1', '2021-01-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (663, '1648881416700428290', '库区1:2000地形地类图坐标转成2000国家大地坐标', '1:2000', '项', '1', '2021-01-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (664, '1648881416700428290', '料场1:2000地形图转成2000国家大地坐标', '1:2000', '项', '1', '2021-01-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (665, '1648881416700428290', '厂区1:1000地形图转成2000国家大地坐标', '1:1000', '项', '1', '2021-01-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (666, '1648881416700428290', '施工区1:2000地形图转成2000国家大地坐标', '1:2000', '项', '1', '2021-01-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (667, '1648881416276803586', '磨子沟取水口地形图测绘', '1:500', 'km²', '0.004', '2021-03-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (668, '1648881416444575746', '汗密厂址区地形地类图测绘', '1:2000', 'km²', '15.0', '2021-04-30', NULL, '已有地形图缩编、补齐并外业修补测地形、地类');
INSERT INTO `cmc_project_work` VALUES (669, '1648881416276803586', '控制点测量', '五等', '点', '6', '2021-03-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (670, '1648881415991590913', '正射影像作图（DOM）制作', '1:2000', 'km²', '22.9', '2021-04-30', NULL, '能够套合到原有老鹰岩一二级1:2000地形地类图上。老鹰岩一级坝区库区浸没区地形地类图约7.2平方公里，二级');
INSERT INTO `cmc_project_work` VALUES (671, '1648881415991590913', '库委地形图补测', '1:2000', 'km²', '0.6', '2021-05-20', NULL, '立体采集委外');
INSERT INTO `cmc_project_work` VALUES (672, '1648881415991590913', '老鹰岩二级坝址至龙头石坝址沿河道航拍', NULL, 'km', '24', '2021-04-30', NULL, '影像、视频拍摄，按3人，8天预算');
INSERT INTO `cmc_project_work` VALUES (673, '1648881415530217473', '孔玉乡折洛沟公路管道地形图测绘', '1:1000', 'km²', '1.04', '2021-07-25', NULL, '宽度不足200m按200m计，长度约5.2km');
INSERT INTO `cmc_project_work` VALUES (674, '1648881415530217473', '孔玉乡折洛沟公路河沟管道地形图测绘', '1:1000', 'km²', '0.1', '2021-07-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (675, '1648881415530217473', '孔玉乡折洛沟取水口地形图测绘', '1:500', 'km²', '0.1', '2021-07-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (676, '1648881416276803586', '金汤小学旧址后坡危石地形图测绘', '1:500', 'km²', '0.06', '2021-03-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (677, '1648881415530217473', '孔玉乡折洛沟储水池地形图测绘', '1:500', 'km²', '0.1', '2021-07-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (678, '1648881415530217473', '五等导线测量（代替四等三角高程）', '五等', 'km', '7', '2021-07-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (679, '1648881415530217473', '管线配合测量', '人/天', '人.天', '6', '2021-07-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (680, '1648881415530217473', '四等GPS点', '四等', '点', '4', '2021-07-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (681, '1648881415492468738', '二等三角点观测', '二等', '点', '20', '2021-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (682, '1648881415492468738', '二等边观测', '二等', '条', '32', '2021-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (683, '1648881415492468738', '三等三角高程观测', '三等', 'km', '10.2', '2021-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (684, '1648881415492468738', '二等水准观测', '二等', 'km', '5.54', '2021-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (685, '1648881415492468738', '新增二等平面观测墩', '二等', '点/座', '3', '2021-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (686, '1648881415492468738', '新增二等基本水准点', '二等', '点/座', '3', '2021-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (687, '1648881415492468738', '新增二等普通水准点', '二等', '点/座', '3', '2021-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (688, '1648881415026900993', '25.5 万宗、150万亩存量林权图斑调绘、底图制作、数据矢量化及整理录入转换及约110万页登记档案扫描、整理', NULL, '项', '1', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (689, '1648881415026900993', '不动产登记信息数据库建设及汇交', NULL, '项', '1', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (690, '1648881415362445314', '更新2020年度国土变更调查数据库', NULL, '项', '1', '2021-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (691, '1648881415001735169', '配合开展溪洛渡水电站云南库区新增影响区实物指标调查', NULL, '人.天', '14', '2021-08-22', NULL, '工作量为预估，2人配合一周。工作量以完成后找甲方联系人签配合情况说明为准。');
INSERT INTO `cmc_project_work` VALUES (692, '1648881415026900993', '资料收集', NULL, '项', '1', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (693, '1648881414880100353', '三维模型、DOM、DSM制作', '1:1000', 'km²', '1.1', '2021-09-03', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (694, '1648881414880100353', '现场查勘', NULL, '次', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (695, '1648881414880100353', '激光点云、倾斜摄影', '1:1000', 'km²', '1.1', '2021-09-03', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (696, '1648881414880100353', '现场应急演练', NULL, '次', '3', NULL, NULL, '演练时间待定');
INSERT INTO `cmc_project_work` VALUES (697, '1648881414775242753', '边坝县光伏布置测绘1:500', '1:500', 'km²', '0.09', '2021-09-20', NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (698, '1648881414796214274', '新联土料场地形图补充测绘', '1:1000', 'km²', '0.18', '2021-09-08', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (699, '1648881414859128834', '老鹰岩视频航飞', NULL, 'km', '12', '2021-10-04', NULL, '工作量为预估，预计2人6天');
INSERT INTO `cmc_project_work` VALUES (700, '1648881414775242753', '洛隆县示范区测图1:1000', '1:1000', 'km²', '0.38', '2021-09-20', NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (701, '1648881414775242753', '洛隆县光伏布置测绘1:500', '1:500', 'km²', '0.09', '2021-09-20', NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (702, '1648881414775242753', '洛隆县光伏布置测绘1:500', '1:500', 'km²', '0.44', '2021-09-20', NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (703, '1648881414775242753', '丁青县光伏布置测绘1:500', '1:500', 'km²', '0.09', '2021-09-20', NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (704, '1648881414775242753', '丁青取水构筑物测绘1:500', '1:500', 'km²', '0.1286', '2021-09-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (705, '1648881414775242753', '边坝县取水构筑物测绘1:500', '1:500', 'km²', '0.0893', '2021-09-20', NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (706, '1648881414775242753', '四等三角高程测量', '四等', 'km', '10', '2021-09-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (707, '1648881414775242753', '三等点', '三等', '点', '6', '2021-09-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (708, '1648881414775242753', '洛隆县取水构筑物测绘1:500', '1:500', 'km²', '0.2956', '2021-09-20', NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (709, '1648881414750076930', '控制测量，包括选点、造埋、绘点之记、观测，平差计算，成果表编制；', NULL, '项', '1', '2021-12-31', NULL, '具体工作量与甲方联系人沟通');
INSERT INTO `cmc_project_work` VALUES (710, '1648881414775242753', '边坝县示范区测图1:1000', '1:1000', 'km²', '0.26', '2021-09-20', NULL, '外业困难系数按1.5计。');
INSERT INTO `cmc_project_work` VALUES (711, '1648881414750076930', '界桩测设，包括界桩制作、搬运、开挖、安装、埋设及放线与测量；', NULL, '项', '1', '2021-12-31', NULL, '具体工作量与甲方联系人沟通');
INSERT INTO `cmc_project_work` VALUES (712, '1648881414750076930', '墙式标志牌测设，包括墙式标志牌制作、搬运、开挖、安装、埋设及放线与测量；', NULL, '项', '1', '2021-12-31', NULL, '具体工作量与甲方联系人沟通');
INSERT INTO `cmc_project_work` VALUES (713, '1648881417262465026', '外业进出场', NULL, '人.天', '6', '2021-01-08', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (714, '1648881417149218818', '硝厂沟地形图测绘', '1:500', 'km²', '0.20', '2021-01-05', NULL, '项目委外总费用');
INSERT INTO `cmc_project_work` VALUES (715, '1648881417149218818', '硝厂沟地形图测绘', '1:2000', 'km²', '1.00', '2021-01-05', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (716, '1648881417149218818', '控制点测量', '五等', '点', '3', '2021-01-05', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (717, '1648881417149218818', '项目管理费', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (718, '1648881417044361218', '1:500地形图测绘', '1:500', 'km²', '0.2', NULL, NULL, '完成时间和具体工作量现场确定');
INSERT INTO `cmc_project_work` VALUES (719, '1648881414276120578', '五等控制点', '五等', '点', '6', '2021-11-30', NULL, '平均高程4000左右');
INSERT INTO `cmc_project_work` VALUES (720, '1648881414049628162', '地形图测量', '1:500', 'km²', '0.524', '2021-12-31', NULL, '实测');
INSERT INTO `cmc_project_work` VALUES (721, '1648881414049628162', '坐标转换', NULL, '点', '20', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (722, '1648881414049628162', '图根点测量', '图根', '点', '9', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (723, '1648881414049628162', '1:500地形图数字化', '1:500', 'km²', '0.331', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (724, '1648881414049628162', '现场配合', NULL, '人.天', '4', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (725, '1648881413948964865', '水下地形图测量', '1:1000', 'km²', '0.2', '2022-01-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (726, '1648881413986713601', '测量中心服务', NULL, '项', '1', '2022-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (727, '1648881413709889537', 'GNSS测量', '五等', '点', '6', '2022-02-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (728, '1648881413948964865', '岸上地形图测量', '1:1000', 'km²', '0.3', '2022-01-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (729, '1648881413709889537', '瀑布沟丰乐浸水湾（含上油房）地形图测绘', '1:1000', 'km²', '1', '2022-02-24', NULL, '内业委外');
INSERT INTO `cmc_project_work` VALUES (730, '1648881413709889537', '三角高程测量', '四等', 'km', '6', '2022-02-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (731, '1648881413709889537', '无人机飞行', NULL, '人.天', '2', '2022-02-24', NULL, '按2人1天计');
INSERT INTO `cmc_project_work` VALUES (732, '1648881413684723714', '地形图测绘', '1:2000', 'km²', '2.9', '2022-02-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (733, '1648881412912971777', '老旧小区地形图测绘', '1:500', '项', '1', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (734, '1648881412929748993', '界址点测绘及地类面积量算', NULL, '亩', '60', '2022-06-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (735, '1648881412929748993', '勘测定界图件、表册、报告编制', NULL, '项', '1', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (736, '1648881412875223041', '地形图测绘', '1:2000', 'km²', '20.63', '2022-06-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (737, '1648881412875223041', '三维地形面', '1:2000', 'km²', '20.63', '2022-06-27', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (738, '1648881412892000257', '三等GNSS测量', '三等', '点', '6', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (739, '1648881412892000257', '四等高程测量', '四等', 'km', '30', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (740, '1648881412892000257', '五等控制点', '五等', '点', '4', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (741, '1648881412892000257', '工程区1：2000地形图测量', '1:2000', 'km²', '16', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (742, '1648881412892000257', '定点航拍全景图制作', NULL, '点', '3', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (743, '1648881412829085697', '地形图测绘', '1:500', 'km²', '8.5', '2022-06-27', NULL, '测区需布设满足勘探放样的控制点。');
INSERT INTO `cmc_project_work` VALUES (744, '1648881412812308481', '地形图测绘', '1:500', 'km²', '3.5', '2022-06-27', NULL, '测区需布设满足勘探放样的控制点。');
INSERT INTO `cmc_project_work` VALUES (745, '1648881412984274945', '泄洪洞出口左岸1:1000地形图测绘', '1:1000', 'km²', '0.05', '2022-06-20', NULL, '合同签订后第二日起5日内完成。');
INSERT INTO `cmc_project_work` VALUES (746, '1648881412984274945', '泄洪洞出口右岸局部防护损毁处的坐标测量', NULL, '点', '14.00', '2022-06-20', NULL, '合同签订后第二日起5日内完成。');
INSERT INTO `cmc_project_work` VALUES (747, '1648881412984274945', '五等GNSS测量', NULL, '点', '4.00', '2022-06-20', NULL, '合同签订后第二日起5日内完成。');
INSERT INTO `cmc_project_work` VALUES (748, '1648881412795531265', '输水线路及发电厂房1:5000地形图测量', '1:5000', 'km²', '8', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (749, '1648881412795531265', '无人机航拍原始影像、POS数据、像控点坐标及实景三维模型', '1:1000', 'km²', '0.5', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (750, '1648881412795531265', '三维地形面', '1:1000', 'km²', '1', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (751, '1648881412795531265', '枢纽平面布置图坐标转换', NULL, '点', '112', '2022-06-30', NULL, '已由杨振负责实施。');
INSERT INTO `cmc_project_work` VALUES (752, '1648881412774559745', '施工控制网点恢复测量及现场点位移交', NULL, '项', '1', '2022-07-15', NULL, '完善点位移交手续');
INSERT INTO `cmc_project_work` VALUES (753, '1648881412753588225', '泥洛沟取水口1:500地形图测绘', '1:500', 'km²', '0.1', '2022-06-27', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (754, '1648881412753588225', '泥洛河坝水厂新址1:500地形图测绘', '1:500', 'km²', '0.1', '2022-06-27', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (755, '1648881412753588225', '长河坝水电站光庄子取水口1:500地形图测绘', '1:500', 'km²', '0.1', '2022-06-27', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (756, '1648881412753588225', '五等GNSS测量', '五等', '点', '12', '2022-06-27', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (757, '1648881412736811010', '广西南宁上林抽水蓄能电站航飞', '1:1000', 'km²', '11.72', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (758, '1648881412254466049', '长石坝-南天门防火道路恢复重建工程1:1000地形图测绘', '1:1000', 'km²', '3.2', '2022-10-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (759, '1648881414712328193', '1、地物调绘', '1:2000', 'km²', '0.01', '2021-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (760, '1648881414712328193', '2、地形图测绘', '1:2000', 'km²', '0.012', '2021-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (761, '1648881414712328193', '3、地物调绘', '1:2000', 'km²', '0.052', '2021-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (762, '1648881414712328193', '4、地物调绘', '1:2000', 'km²', '0.022', '2021-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (763, '1648881414712328193', '5、地物调绘', '1:2000', 'km²', '0.023', '2021-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (764, '1648881414712328193', '6、地形图测绘', '1:2000', 'km²', '0.019', '2021-09-30', NULL, '小面积，费用按人天计，6块按4人天计费（含内外业）。');
INSERT INTO `cmc_project_work` VALUES (765, '1648881414544556034', '（2）航空影像生产。对项目区内重点区域和现有影像未能有效覆盖区域开展低空无人机摄影测量，生产1:2000比', NULL, NULL, NULL, NULL, NULL, '2020-2021年度计划实施的项目，乙方应在2021年12月31日前完成项目主体工作任务，向甲方提交成果；2022-2023');
INSERT INTO `cmc_project_work` VALUES (766, '1648881414431309825', '五等控制点', NULL, '点', '6', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (767, '1648881414431309825', '工程区地形图测绘', '1:5000', 'km²', '11', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (768, '1648881414431309825', '1:2000地形图缩编成1:5000地形图', '1:5000', 'km²', '11.2', '2021-11-20', NULL, '1：2000比例尺范围内所有地形图');
INSERT INTO `cmc_project_work` VALUES (769, '1648881414431309825', '三维地形面制作', '1:5000', 'km²', '22.2', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (770, '1648881414431309825', '上水库及输水发电系统区地形图测绘', '1:2000', 'km²', '11.2', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (771, '1648881414431309825', '三维地形面制作', '1:2000', 'km²', '11.2', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (772, '1648881414389366785', '工程区1:5000地形图测绘', '1:5000', 'km²', '64', '2021-11-20', NULL, '11月10左右提交中间成果');
INSERT INTO `cmc_project_work` VALUES (773, '1648881414389366785', '坝址区1:1000地形图测绘（含水下地形）', '1:1000', 'km²', '2.5', '2021-12-15', NULL, '暂按按时2km²，水下0.5km²估算');
INSERT INTO `cmc_project_work` VALUES (774, '1648881413462425602', '工程量分析报告', NULL, '项', '1', '2022-03-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (775, '1648881413395316737', '乳源高新区绿之源西侧地块标准厂房建设项目沉降监测项目', NULL, '次', '12', '2022-12-31', NULL, '观测频次为1个月一次，自2022年01月起实施，观测周期按照一年执行，则合同期内共观测12次（提交12次监测报');
INSERT INTO `cmc_project_work` VALUES (776, '1648881413378539521', '1:500地形图', '1:500', '亩', '300', '2022-03-31', NULL, '2000坐标系、西安80坐标系各两套。');
INSERT INTO `cmc_project_work` VALUES (777, '1648881413378539521', '用地红线图及界址点坐标表', NULL, '个', '2', '2022-03-31', NULL, '2份');
INSERT INTO `cmc_project_work` VALUES (778, '1648881413328207874', '混凝土溢流冲砂坝墩变形观测', NULL, '项', '1', NULL, NULL, '合同签订之日至技术服务内容完成。');
INSERT INTO `cmc_project_work` VALUES (779, '1648881413328207874', '变形监测控制网观测', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (780, '1648881413328207874', '一等三角观测（变形监测控制网）', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (781, '1648881413328207874', '一等边长测量（变形监测控制网）', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (782, '1648881413328207874', '一等三角观测（视准线工作基点）', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (783, '1648881413328207874', '一等边长测量（视准线工作基点）', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (784, '1648881413328207874', '一等三角观测（自动化监测工作基点）', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (785, '1648881413328207874', '一等边长测量（自动化监测工作基点）', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (786, '1648881413328207874', '三等光电测距三角高程测量', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (787, '1648881413328207874', '一等水准测量', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (788, '1648881413328207874', '网形及点位设计', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (789, '1648881413328207874', '资料整编分析', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (790, '1648881413328207874', '安全监测巡视', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (791, '1648881413344985090', 'Z1～Z2镇墩间钢管位移监测 ', NULL, '项', '1', NULL, NULL, '合同签订之日至技术服务内容完成。');
INSERT INTO `cmc_project_work` VALUES (792, '1648881413344985090', '压力钢管伸缩节变形监测', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (793, '1648881413344985090', 'Z13镇墩基础及周边边坡稳定监测', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (794, '1648881413344985090', '水工检查', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (795, '1648881413344985090', '羊湖压力钢管资料整编分析', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (796, '1648881413344985090', '沉降、水平位移测量', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (797, '1648881413344985090', '引水隧洞洞身等情况，伸缩缝开合和止水情况', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (798, '1648881413344985090', '水工检查', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (799, '1648881413344985090', '资料整编分析', NULL, '项', '1', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (800, '1648881413294653441', '地形图测绘（岸上）', '1:2000', 'km²', '0.46', '2022-04-08', NULL, '分4段，总长2.282km长，宽度以水边线向岸上测200m宽。');
INSERT INTO `cmc_project_work` VALUES (801, '1648881413294653441', '地形图测绘（水下）', '1:2000', 'km²', '0.114', '2022-04-08', NULL, '分4段，总长2.282km长，宽度以水边线向水中测50m宽。');
INSERT INTO `cmc_project_work` VALUES (802, '1648881413294653441', '断面测量', '1:200', 'km', '1.7', '2022-04-08', NULL, '上下游端点各测一条，其余按200m一条控制，共4条，每条以水边线为起点向河测50m，向岸测50m');
INSERT INTO `cmc_project_work` VALUES (803, '1648881413294653441', '断面基点', '五等/四等', '点', '17', '2022-04-08', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (804, '1648881413311430658', '1:500激光数据采集', '1:500', 'km²', '12.36', '2022-04-10', NULL, '全线路约103公里，带宽大部分是120米，局部有加宽');
INSERT INTO `cmc_project_work` VALUES (805, '1648881413277876226', '地形图测绘', '1:2000', 'km²', '31.72', '2022-04-25', NULL, '进场事宜、疫情管控及工期需与用户方再沟通。');
INSERT INTO `cmc_project_work` VALUES (806, '1648881413265293314', '库区垫高防护工程1:1000地形图测绘', '1:1000', 'km²', '0.99', '2022-04-25', NULL, '4块');
INSERT INTO `cmc_project_work` VALUES (807, '1648881413265293314', '供水水源雅嘎措1:1000地形图测绘', '1:1000', 'km²', '0.15', '2022-04-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (808, '1648881413265293314', '四等GNSS测量', '四等', '点', '15', '2022-04-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (809, '1648881413265293314', '四等三角高程测量', '四等', 'km', '10', '2022-04-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (810, '1648881413210767362', 'GNSS测量', '五等', '点', '4', '2022-04-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (811, '1648881413227544578', '沙坝弃渣料场1:1000地形图测绘', '1:1000', 'km²', '0.24', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (812, '1648881413210767362', '禾茂田园1:500地形图测绘', '1:500', 'km²', '0.05', '2022-04-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (813, '1648881414750076930', '界桩点展绘、征地红线图绘制，包括界桩点展点与绘制、征地红线图绘制等；', NULL, '项', '1', '2021-12-31', NULL, '具体工作量与甲方联系人沟通');
INSERT INTO `cmc_project_work` VALUES (814, '1648881414750076930', '配合成果现场验收及移交。', NULL, '项', '1', '2021-12-31', NULL, '具体工作量与甲方联系人沟通');
INSERT INTO `cmc_project_work` VALUES (815, '1648881414292897793', '地形图测绘', '1:2000', 'km²', '7.74', '2021-11-30', NULL, '内业委外');
INSERT INTO `cmc_project_work` VALUES (816, '1648881414292897793', '三维地形面', '1:2000', 'km²', '7.74', '2021-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (817, '1648881414292897793', '五等控制点', '五等', '点', '6', '2021-11-30', NULL, '平均高程2500左右');
INSERT INTO `cmc_project_work` VALUES (818, '1648881413651169282', '饮水线路地形图测量', '1:1000', 'km²', '0.1', '2022-03-04', NULL, '工作量为预估，待移民专业最终落实。');
INSERT INTO `cmc_project_work` VALUES (819, '1648881413651169282', '丹巴移民安置点地形图测量', '1:1000', 'km²', '0.07', '2022-03-04', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (820, '1648881413412093953', 'GPS测量', '二等', '点', '8', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (821, '1648881413412093953', 'GPS测量', '三等', '点', '25', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (822, '1648881413412093953', '五等导线', '五等', 'km', '120', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (823, '1648881413651169282', '焦子坪移民安置点地形图测量', '1:500', 'km²', '0.03', '2022-03-04', NULL, '平台及挡墙间隔10米一个高程标注。');
INSERT INTO `cmc_project_work` VALUES (824, '1648881413412093953', '高程测量', '三等', 'km', '260', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (825, '1648881413412093953', '高程测量', '四等', 'km', '66', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (826, '1648881413412093953', '断面基点测量', '五等/四等', '点', '100', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (827, '1648881413412093953', '库区局部1:1000地形图测绘（含水下地形）', '1:1000', 'km²', '8', '2022-05-30', NULL, '米龙乡政府~城南大桥');
INSERT INTO `cmc_project_work` VALUES (828, '1648881413412093953', '中坝址1:500地形图测绘（含水下地形）', '1:500', 'km²', '3.5', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (829, '1648881413412093953', '水库1:1000地形图测绘', '1:1000', 'km²', '2.5', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (830, '1648881413412093953', '料场1:1000地形图测绘', '1:1000', 'km²', '1.5', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (831, '1648881413412093953', '日岗沟渣场1：1000地形图测绘', '1:1000', 'km²', '0.5', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (832, '1648881413412093953', '日衣村下游支沟1:1000地形图测绘', '1:1000', 'km²', '2.6', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (833, '1648881413412093953', '木灰沟施工场地1：1000地形图测绘', '1:1000', 'km²', '3.5', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (834, '1648881413412093953', '力丘河施工场地1:1000地形图测绘', '1:1000', 'km²', '0.5', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (835, '1648881413412093953', '牙根二级及楞古工区施工总布置范围1:5000地形图测绘', '1:5000', 'km²', '122', '2022-05-30', NULL, '已有5000范围不再重新测');
INSERT INTO `cmc_project_work` VALUES (836, '1648881413412093953', '全库区1:2000地形地类图测量（含水下地形）', '1:2000', 'km²', '43', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (837, '1648881413412093953', '米龙集镇、麻郎错集镇、八依绒集镇新址1:1000地形地类图测绘', '1:1000', 'km²', '3.5', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (838, '1648881413412093953', '1:1000断面测量', '1:1000', 'km', '95', '2022-05-30', NULL, '米龙乡政府（桥）~孟底沟库尾，间隔2km左右一个，40~50个断面');
INSERT INTO `cmc_project_work` VALUES (839, '1648881413131075586', '四等GNSS测量', '四等', '点', '6', '2022-05-31', NULL, '含2个点引测');
INSERT INTO `cmc_project_work` VALUES (840, '1648881413227544578', '九架棚弃渣料场1:1000地形图测绘', '1:1000', 'km²', '0.24', '2022-05-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (841, '1648881414116737025', '料场及渣场地形图测量', '1:1000', 'km²', '0.15', '2021-12-11', NULL, '项目委外');
INSERT INTO `cmc_project_work` VALUES (842, '1648881413193990145', '库尾实物指标配合测量', NULL, '人.天', '21', '2022-05-13', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (843, '1648881413181407233', '梅县九龙嶂抽蓄电站地形图测量', '1:5000', 'km²', '45.48', '2022-05-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (844, '1648881414473252866', '地形图测量', '1:500', 'km²', '0.015', '2021-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (845, '1648881414095765505', '断面基点复测、维护及断面测量、淤积分析', NULL, '项', '1', '2022-03-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (846, '1648881414095765505', '坝下水下地形测量', '1:500', 'km²', '0.1', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (847, '1648881413181407233', '台山黄茅岗抽蓄电站航飞', '1:1000', 'km²', '18.57', '2022-05-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (848, '1648881413181407233', '台山黄茅岗抽蓄电站地形图测量', '1:5000', 'km²', '18.57', '2022-05-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (849, '1648881413181407233', '控制点测量', '五等', '点', '14', '2022-05-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (850, '1648881413181407233', '梅县九龙嶂抽蓄电站航飞', '1:1000', 'km²', '45.48', '2022-05-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (851, '1648881413147852802', '建设征地实物指标调查', NULL, '人.天', '30', '2022-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (852, '1648881413131075586', '四等高程测量', '四等', 'km', '10', '2022-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (853, '1648881413131075586', '1:1000地形测量', '1:1000', 'km²', '0.7', '2022-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (854, '1648881413131075586', '1:5000地形测量', '1:5000', 'km²', '17.39', '2022-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (855, '1648881413131075586', '1:5000地形图放大为1:2000地形图', NULL, 'km²', '17.39', '2022-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (856, '1648881413072355329', '对上库先进行1：500全野外数字化地形图测量，构建高程模型（DEM），计算上水库库容曲线。', '1:500', 'km²', '0.6', '2022-12-31', NULL, '自合同签订之日12个月完成数据收集和资料整理，具体开工以甲方通知为准，计划下水库2022年4月开始数据采集');
INSERT INTO `cmc_project_work` VALUES (857, '1648881413093326850', '地形测量（含水下地形）', '1:500', 'km²', '0.25', NULL, NULL, '范围须与甲方再沟通落实。');
INSERT INTO `cmc_project_work` VALUES (858, '1648881413114298369', '地形图测绘', '1:1000', 'km²', '0.1', '2022-05-25', NULL, '2块');
INSERT INTO `cmc_project_work` VALUES (859, '1648881413072355329', '对下库先进行1：500全野外数字化地形图测量，构建高程模型（DEM），分别计算下水库库容曲线。', '1:500', 'km²', '0.4', '2022-12-31', NULL, '自合同签订之日12个月完成数据收集和资料整理，具体开工以甲方通知为准，计划下水库2022年4月开始数据采集');
INSERT INTO `cmc_project_work` VALUES (860, '1648881413051383810', '地形图测绘', '1:500', 'm²', '20000', '2022-05-29', NULL, '预估工作量，需与用户沟通确定。');
INSERT INTO `cmc_project_work` VALUES (861, '1648881413009440769', '施工用地范围图坐标转换（1954北京坐标转成2000国家大地坐标）', NULL, '点', '144 ', '2022-06-01', NULL, '6月1日完成');
INSERT INTO `cmc_project_work` VALUES (862, '1648881413009440769', '施工用地范围图gdb数据库制作', NULL, '点', '144 ', '2022-06-01', NULL, '6月1日完成');
INSERT INTO `cmc_project_work` VALUES (863, '1648881413244321794', '工程区地形图测绘', '1:5000', 'km²', '35', '2022-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (864, '1648881413244321794', '上、下库，输水线路地形图测绘', '1:2000', 'km²', '22', '2022-04-30', NULL, '2022.7.5变更为地形地类图，测绘工程中心负责权属调查，航测遥感中心一组负责编制地形地类图。');
INSERT INTO `cmc_project_work` VALUES (865, '1648881413244321794', '控制点测量', '五等', '点', '8', '2022-05-23', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (866, '1648881412631953410', '张牙沟内地面炸药库（场址2）1:500地形图测量', '1:500', 'km²', '0.17', '2022-07-17', NULL, '预估工作量');
INSERT INTO `cmc_project_work` VALUES (867, '1648881412631953410', '雅砻江左岸地下炸药库（场址1）1:500地形图测量', '1:500', 'km²', '0.56', '2022-07-17', NULL, '预估工作量');
INSERT INTO `cmc_project_work` VALUES (868, '1648881412631953410', '5#隧洞施工支洞现状纵剖面', '1:500', 'km', '0.1', '2022-07-20', NULL, '预估工作量');
INSERT INTO `cmc_project_work` VALUES (869, '1648881412631953410', '5#隧洞施工支洞现状横剖面（纵向每10m间距一个测量断面）', '1:500', 'km', '0.1', '2022-07-20', NULL, '预估工作量');
INSERT INTO `cmc_project_work` VALUES (870, '1648881412610981889', '五等GNSS测量', '五等', '点', '6', '2022-07-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (871, '1648881412631953410', '张牙沟35kV变电站1:500地形图测量', '1:500', 'km²', '0.07', '2022-07-17', NULL, '预估工作量');
INSERT INTO `cmc_project_work` VALUES (872, '1648881412610981889', '地形图测绘', '1:2000', 'km²', '10.1', '2022-07-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (873, '1648881412002807809', '四等三角高程测量', '四等', 'km', '20', '2022-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (874, '1648881412002807809', '坝址区1:1000地形图测绘', '1:1000', 'km²', '3.3', '2022-11-20', NULL, '进场后10天提交中间成果。');
INSERT INTO `cmc_project_work` VALUES (875, '1648881412002807809', '库区、引水线路、厂房系统1:2000地形图测绘', '1:2000', 'km²', '18', '2022-11-20', NULL, '进场后10天提交中间成果。');
INSERT INTO `cmc_project_work` VALUES (876, '1648881412363517954', '花溪区', NULL, 'km', '12.4', '2021-11-30', NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (877, '1648881412363517954', '花溪区', NULL, 'km', '26.8', '2021-11-30', NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (878, '1648881412346740737', '工程区1:5000地形图测绘（水下）', '1:5000', 'km²', '2', '2022-08-31', NULL, '同时提供三维地形面');
INSERT INTO `cmc_project_work` VALUES (879, '1648881412363517954', '花溪区小黄河', NULL, 'km', '21.9', '2021-11-30', NULL, '本项目为补登记生产任务，合同工期为2021年11月30日完成，实际2022年5月开展工作。');
INSERT INTO `cmc_project_work` VALUES (880, '1648881412476764161', '达西沟渣场1:2000地形图测绘', '1:2000', 'km²', '5.65', '2022-08-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (881, '1648881414389366785', '厂址区1:1000地形图测绘（含水下地形）', '1:1000', 'km²', '2.85', '2021-12-15', NULL, '暂按按时2.35km²，水下0.5km²估算');
INSERT INTO `cmc_project_work` VALUES (882, '1648881414389366785', '坝址区、厂址区1:1000三维地形面', '1:1000', 'km²', '5.35', '2021-12-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (883, '1648881414389366785', '坝址区、厂址区1:1000正射影像', '1:1000', 'km²', '5.35', '2021-12-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (884, '1648881414389366785', '工程区1:5000正射影像', '1:5000', 'km²', '64', '2021-11-20', NULL, '11月10左右提交中间成果');
INSERT INTO `cmc_project_work` VALUES (885, '1648881414389366785', '二等GPS引测', '二等', '点', '8', '2021-11-20', NULL, '包括已知点4个');
INSERT INTO `cmc_project_work` VALUES (886, '1648881414389366785', '三等GPS测量', '三等', '点', '12', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (887, '1648881414389366785', '五等GPS测量', '五等', '点', '8', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (888, '1648881414389366785', '四等水准', '四等', 'km', '70', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (889, '1648881414389366785', '卫片购置费', NULL, 'km²', '100', NULL, NULL, '由公司统一购置');
INSERT INTO `cmc_project_work` VALUES (890, '1648881414372589569', '电站下游河道1:500地形图测绘', '1:500', 'km²', '0.68', '2021-12-15', NULL, '水下按0.48km²，岸上按0.2km²估算');
INSERT INTO `cmc_project_work` VALUES (891, '1648881414544556034', '（1）前期准备。主要包括人员和设备准备、编制方案和技术设计等。收集、整理自然资源、生态环境、水利、林', NULL, NULL, NULL, NULL, NULL, '2020-2023年度县本级重点区域自然资源统一确权登记服务项目涉及5个国有林场、10座水库、8个矿山。详见合同');
INSERT INTO `cmc_project_work` VALUES (892, '1648881414544556034', '（3）制作工作底图。将收集整理的数据资料在最新正射影像上进行落图，编制地籍调查工作底图。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (893, '1648881414544556034', '（4）预划登记单元。基于工作底图，预划自然资源登记单元，确定登记范围', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (894, '1648881414137708545', '地形图测量', '1:500', 'km²', '0.1', '2021-12-04', NULL, '含水下地形，工作量为预估工作，岸上和水下各按0.05计算');
INSERT INTO `cmc_project_work` VALUES (895, '1648881414544556034', '（5）发布通告。配合县人民政府发布首次登记通告。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (896, '1648881414544556034', '（6）内业调查。在工作底图基础上，通过内业采集和信息提取分析，调查获取登记单元范围内的自然资源自然状', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (897, '1648881414544556034', '（7）关联信息。在登记单元调查初步成果上关联不动产登记信息、生态保护红线和国土空间规划用途等特殊保护', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (898, '1648881414544556034', '（8）调查核实。配合相关部门完成对初步调查成果中的登记单元界线、自然状况、权属状况及关联信息等情况进', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (899, '1648881414544556034', '（9）实地补充调查。对调查核实成果经进一步核实仍有缺失、不清晰、不一致或者存在争议的，开展实地补充调', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (900, '1648881414544556034', '（10）调查成果上图。将调查核实和外业补充调查形成的调查成果，按照统一的规格和要求，进行整理上图。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (901, '1648881414603276289', '压力钢管永久变形监测网校核项目', NULL, '项', '1', '2021-12-31', NULL, '按合同额的25%计费，不再报销其它费用。');
INSERT INTO `cmc_project_work` VALUES (902, '1648881414544556034', '（11）数据库建设。按照国家标准建立自然资源地籍调查数据库。', NULL, NULL, NULL, NULL, NULL, '委外项目，委外合同金额90万元。');
INSERT INTO `cmc_project_work` VALUES (903, '1648881414544556034', '（12）成果完善。根据审核反馈意见修改完善成果，完成登簿发证。', NULL, NULL, NULL, NULL, NULL, '预期成果主要包括影像成果、图件成果、表格成果、文字成果、数据库成果。最终成果应符合《自然资源确权登记');
INSERT INTO `cmc_project_work` VALUES (904, '1648881413785387010', '雅砻江桐子林水电站大坝外部变形和近坝区滑坡体观测（2022年）', NULL, '项', '1', '2022-12-31', NULL, '请按照合同要求开展监测工作');
INSERT INTO `cmc_project_work` VALUES (905, '1648881413844107265', '大渡河猴子岩水电站外部变形监测工程（2022年）', NULL, '项', '1', '2022-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (906, '1648881413827330049', '金川水电站工程测量中心劳务配合（2022年度）', NULL, '项', '1', '2022-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (907, '1648881413667946498', '牛棚子沟泥石流治理工程初步设计地形图测绘', '1:1000', 'km²', '1.2', '2022-03-05', NULL, '见用户提供的测量范围kmL文件');
INSERT INTO `cmc_project_work` VALUES (908, '1648881413667946498', '菩提河坝安置场地后坡危岩治理工程设计变更地形图测绘', '1:500', 'km²', '0.1', '2022-03-05', NULL, '范围现场指定');
INSERT INTO `cmc_project_work` VALUES (909, '1648881413667946498', '横断面测量', '1:200', 'km', '0.4', '2022-03-05', NULL, '2条，断面位置现场指定。');
INSERT INTO `cmc_project_work` VALUES (910, '1648881413667946498', '断面基点', '图根', '点', '4', '2022-03-05', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (911, '1648881413626003458', '施工测量测绘服务', NULL, '项', '1', '2022-09-30', NULL, '委托费用包含在两河口测量中心费用内，不再单独预算。');
INSERT INTO `cmc_project_work` VALUES (912, '1648881413584060417', '断面测量', '1:1000', 'km', '0.9', '2022-03-11', NULL, '3条');
INSERT INTO `cmc_project_work` VALUES (913, '1648881413584060417', '断面基点测量', '图根', '点', '6', '2022-03-11', NULL, '按不埋石预算');
INSERT INTO `cmc_project_work` VALUES (914, '1648881414729105410', '什月河地形图测量', '1:500', 'km²', '0.147', '2021-09-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (915, '1648881414729105410', '断面测量', '1:500', 'km', '0.1', '2021-09-20', NULL, '桥位处，断面长度到两侧山坡，比现状桥面高20m');
INSERT INTO `cmc_project_work` VALUES (916, '1648881414511001602', '白格滑坡体1:1000实景三维模型制作', '1:1000', 'km²', '2', '2021-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (917, '1648881414511001602', '白格滑坡体1:1000正射影像大图制作', '1:1000', 'km²', '2', '2021-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (918, '1648881414527778817', '三等平面观测墩标', '三等', '点', '10', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (919, '1648881414527778817', '三等平面观测地面砼标', '三等', '点', '6', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (920, '1648881414527778817', '二等基本水准点', '二等', '点', '2', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (921, '1648881414527778817', '二等普通水准点', '二等', '点', '2', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (922, '1648881414527778817', '四等GNSS平面控制网引测', '四等', '点', '6', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (923, '1648881414527778817', '四等水准引测', '四等', 'km', '3', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (924, '1648881414527778817', '三等边观测', '三等', '条', '8', '2021-11-20', NULL, '按2km 公里每条计。');
INSERT INTO `cmc_project_work` VALUES (925, '1648881414527778817', '三等GPS观测', '三等', '点', '16', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (926, '1648881414527778817', '二等水准观测', '二等', 'km', '34.49 ', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (927, '1648881412493541377', '二等地面三角形网平面观测墩标', '二等', '点', '7', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (928, '1648881412493541377', '三等GNSS平面观测地面砼标', '三等', '点', '20', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (929, '1648881412493541377', '二等基本水准点', '二等', '点', '3', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (930, '1648881414259343361', '五等控制点', '五等', '点', '6', '2021-11-30', NULL, '平均海拔4000左右');
INSERT INTO `cmc_project_work` VALUES (931, '1648881414259343361', '无人机航飞（影像采集）', '1:2000', 'km²', '11.53', '2021-11-25', NULL, '委外飞行');
INSERT INTO `cmc_project_work` VALUES (932, '1648881414259343361', '地形图测绘', '1:2000', 'km²', '11.53', '2021-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (933, '1648881414259343361', '三维地形面制作', '1:2000', 'km²', '11.53', '2021-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (934, '1648881412493541377', '二等普通水准点', '二等', '点', '9', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (935, '1648881412493541377', '便道修筑', NULL, 'km', '7.5', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (936, '1648881412493541377', '三等GNSS平面控制网引测', '三等', '点', '7', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (937, '1648881412493541377', '二等GNSS平面连接网', '二等', '点', '6', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (938, '1648881412493541377', '二等地面三角形网观测', '二等', '点', '7', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (939, '1648881412493541377', '三等GNSS点观测', '二等', '点', '20', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (940, '1648881412493541377', '二等边观测', '二等', '点', '15', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (941, '1648881412493541377', '三等边观测', '三等', '点', '17', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (942, '1648881412493541377', '二等水准引测', '二等', 'km', '3', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (943, '1648881412493541377', '三等三角高程观测', '三等', 'km', '29.5', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (944, '1648881414511001602', '白格滑坡体1:1000地形图测绘', '1:1000', 'km²', '2', '2021-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (945, '1648881412493541377', '二等水准观测', '二等', 'km', '42', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (946, '1648881412493541377', '资料整编', NULL, '项', '1', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (947, '1648881412443209730', '二等GNSS测量', '二等', '点', '21', '2022-08-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (948, '1648881412443209730', '三等GNSS测量', '三等', '点', '3', '2022-08-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (949, '1648881412443209730', '二等水准测量', '二等', 'km', '131.75', '2022-08-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (950, '1648881412443209730', '三等水准测量', '三等', 'km', '49.68', '2022-08-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (951, '1648881412401266689', 'E级GNSS测量', '四等', '点', '6', '2022-08-12', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (952, '1648881412401266689', '四等高程测量', '四等', 'km', '20', '2022-08-12', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (953, '1648881412401266689', '机载激光扫描和航空摄影', '1:1000', 'km²', '15', '2022-07-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (954, '1648881412401266689', '上水库地形测绘', '1:2000', 'km²', '6.813', '2022-08-12', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (955, '1648881412401266689', '厂区地形测绘', '1:2000', 'km²', '4.27', '2022-08-12', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (956, '1648881412296409090', '下水库地形图（1：1000）', '1:1000', 'km²', '2.23', '2022-09-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (957, '1648881412296409090', '上水库地形图（1：1000）', '1:1000', 'km²', '1.69', '2022-09-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (958, '1648881412296409090', '补测地形图（1：2000）', '1:2000', 'km²', '3.23', '2022-09-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (959, '1648881411751149569', '8#公路和白格堰塞湖影响区1:1000地形图补充测量（水下）', '1:1000', 'km²', '0.8', '2023-01-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (960, '1648881413927993346', '辖曼1号料场及连接道路地形图测量', '1:1000', 'km²', '0.2', '2022-01-10', NULL, '预估工作量，现场地质及设计专业再确认。');
INSERT INTO `cmc_project_work` VALUES (961, '1648881414066405377', '枢纽区施工控制网随机复测', NULL, '次', '1', '2021-12-31', NULL, '按合同约定开展随机复测一次');
INSERT INTO `cmc_project_work` VALUES (962, '1648881413877661698', '厂址区地形图测量', '1:2000', 'km²', '8', '2022-01-23', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (963, '1648881413877661698', '机位及升压站地形图测量', '1:500', 'km²', '0.61', '2022-01-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (964, '1648881413584060417', '1:1000地形测量（岸上部分）', '1:1000', 'km²', '0.3', '2022-03-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (965, '1648881413584060417', '1:1000地形测量（水下部分）', '1:1000', 'km²', '0.3', '2022-03-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (966, '1648881413584060417', '水边线测量', '1:1000', 'km', '4.6', '2022-03-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (967, '1648881413584060417', '流量测验', NULL, '次', '2', '2022-03-11', NULL, '按配合测量1个人天预算');
INSERT INTO `cmc_project_work` VALUES (968, '1648881411751149569', '巴弄达润沟渣场及藏曲1:1000地形图测量（岸上）', '1:1000', 'km²', '2.76', '2023-01-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (969, '1648881411751149569', 'GNSS测量', '四等', '点', '11', '2023-01-15', NULL, '含引测3点');
INSERT INTO `cmc_project_work` VALUES (970, '1648881411751149569', '8#公路和白格堰塞湖影响区1:1000地形图补充测量（岸上）', '1:1000', 'km²', '1.5', '2023-01-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (971, '1648881411751149569', '高程测量', '四等', 'km', '25', '2023-01-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (972, '1648881414490030081', '内窥检测(QV)', NULL, 'km', '10', '2021-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (973, '1648881414490030081', '内窥检测(CCTV)', NULL, 'km', '15', '2021-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (974, '1648881414355812353', '取水口地形图测绘', '1:500', 'km²', '0.04', '2021-11-20', NULL, '取水口规划范围，横向200m，纵向200m范围内。1.5万委给王小刚开展工作。');
INSERT INTO `cmc_project_work` VALUES (975, '1648881414154485761', 'XR吊桥地形图测量', '1:500', 'km²', '0.015', '2021-12-10', NULL, '桥轴线两侧约50m的所有区域、及桥位两侧各200米的已有道路。');
INSERT INTO `cmc_project_work` VALUES (976, '1648881414154485761', 'JW吊桥地形图测量', '1:500', 'km²', '0.015', '2021-12-10', NULL, '桥轴线两侧约50m的所有区域、及桥位两侧各200米的已有道路。');
INSERT INTO `cmc_project_work` VALUES (977, '1648881414037045250', '四等三角高程', '四等', 'km', '40', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (978, '1648881414234177537', '地形图测绘', '1:1000', 'km²', '1.1', '2021-11-30', NULL, '4块，预估工作量，以kml及用户现场确认为准。');
INSERT INTO `cmc_project_work` VALUES (979, '1648881414234177537', '横断面测量', '1:1000', 'km', '1', '2021-11-30', NULL, '10条断面，预估每条100m。');
INSERT INTO `cmc_project_work` VALUES (980, '1648881414355812353', '线路地形图测绘', '1:2000', 'km²', '1.66', '2021-11-20', NULL, '轴线两侧各100m为测图范围');
INSERT INTO `cmc_project_work` VALUES (981, '1648881414234177537', '图根点测量', '图根', '点', '12', '2021-11-30', NULL, '每个测区3个。');
INSERT INTO `cmc_project_work` VALUES (982, '1648881414213206018', '地形图测绘', '1:500', 'km²', '0.08', '2021-11-30', NULL, '2.5km带状地形图');
INSERT INTO `cmc_project_work` VALUES (983, '1648881414154485761', 'XR上坝址水下地形测量', '1:2000', 'km²', '0.6', '2021-12-10', NULL, '与现场地质人员确定落实范围。');
INSERT INTO `cmc_project_work` VALUES (984, '1648881414078988290', '金川水电站工程测量中心劳务配合（2021年度）', NULL, '项', '1', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (985, '1648881414037045250', '五等GPS测量', '五等', '点', '6', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (986, '1648881414037045250', '地形图测绘', '1:5000', 'km²', '18.5', '2021-12-31', NULL, '工期及工作量为暂定，工作量以现有范围外扩一点，具体工作量及工期需与用户方再协商确定。采用卫片。');
INSERT INTO `cmc_project_work` VALUES (987, '1648881414020268033', '配合测量', NULL, '人.天', '4', '2021-12-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (988, '1648881413894438914', '川西大桥固床坝1:1000地形图测量', '1:1000', 'km²', '0.724', '2022-01-16', NULL, '应重点测明以下内容：原水毁固床坝轴线、结构尺寸、高程，两岸给水管管线，井位置、高程，河道范围内的既有');
INSERT INTO `cmc_project_work` VALUES (989, '1648881413894438914', '工点二边坡1:1000地形图测量', '1:1000', 'km²', '0.023', '2022-01-16', NULL, '应重点测明以下内容：现状道路边界、中心线及路面标高；边坡垮塌范围界线、长度等；工程范围内的既有建构筑');
INSERT INTO `cmc_project_work` VALUES (990, '1648881413894438914', '五等GNSS测量', '五等', '点', '12', '2022-01-16', NULL, '每个点位4个点');
INSERT INTO `cmc_project_work` VALUES (991, '1648881413894438914', '工点三边坡1:1000地形图测量', '1:1000', 'km²', '0.064', '2022-01-16', NULL, '应重点测明以下内容：现状道路边界、中心线及路面标高；边坡垮塌范围界线、长度等；工程范围内的既有建构筑');
INSERT INTO `cmc_project_work` VALUES (992, '1648881413567283202', '浦西房屋高程点测量', '图根', '点', '64', '2022-03-31', NULL, '32栋房子，每个房子测2个高程点。');
INSERT INTO `cmc_project_work` VALUES (993, '1648881413584060417', '桥梁，施工场平临建设施等建筑物简要轮廓及地面高程', '图根', '点', '40', '2022-03-11', NULL, '工作量为预估。参照地质点测量单价');
INSERT INTO `cmc_project_work` VALUES (994, '1648881413529534465', '原始水下地形测量', '1:500', 'km²', '0.25', '2022-03-25', NULL, '长度5km，平均宽度50m，工作量及范围须与甲方再沟通落实。');
INSERT INTO `cmc_project_work` VALUES (995, '1648881413550505985', '断面测量', '1:2000', 'km', '5.5', '2022-04-10', NULL, '11条断面，每条测至水边线以上100m，暂按500m/条计。');
INSERT INTO `cmc_project_work` VALUES (996, '1648881413550505985', '断面基点', '五等/四等', '点', '22', '2022-04-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (997, '1648881413550505985', '地形图补测', '1:10000', 'km²', '6', '2022-03-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (998, '1648881413550505985', '炸药库地形图测量', '1:2000', 'km²', '0.85', '2022-04-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (999, '1648881413483397121', '牙根二级中坝址~楞古上坝址1:2000地形图测绘（水下部分）', '1:2000', 'km²', '0.13', '2022-03-31', NULL, '等高线不得打断。');
INSERT INTO `cmc_project_work` VALUES (1000, '1648881413483397121', '河道1:1000大断面测量', '1:1000', 'km', '7.5', '2022-04-20', NULL, '30条，每条暂估250m，可与规划专业监测时段同步开展。');
INSERT INTO `cmc_project_work` VALUES (1001, '1648881413483397121', '力丘河汇口1:1000水下地形图测绘', '1:1000', 'km²', '0.3', '2022-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1002, '1648881413483397121', '力丘河汇口以上1:1000水下地形图测绘', '1:1000', 'km²', '0.2', '2022-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1003, '1648881413483397121', '力丘河汇口以上1:1000大断面测量', '1:1000', 'km', '0.5', '2022-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1004, '1648881413483397121', '木灰沟口至楞古上坝址河段1:1000水下地形图测绘', '1:1000', 'km²', '1', '2022-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1005, '1648881413483397121', '宋玉沟汇口以上1:1000水下地形图测绘', '1:1000', 'km²', '0.15', '2022-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1006, '1648881413751832578', '天星坝水库界桩测设', NULL, '项', '1', '2022-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1007, '1648881413483397121', '牙根二级中坝址~楞古上坝址1:2000地形图测绘（岸上部分）', '1:2000', 'km²', '0.53', '2022-03-31', NULL, '等高线不得打断。');
INSERT INTO `cmc_project_work` VALUES (1008, '1648881413483397121', '马蹄村至马蹄村1:1000水下地形图测绘', '1:1000', 'km²', '0.6', '2022-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1009, '1648881413483397121', '减水河段有跌水河段1:1000水下地形图测绘', '1:1000', 'km²', '0.1', '2022-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1010, '1648881413483397121', '断面基点测量', '五等/四等', '点', '64', '2022-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1011, '1648881413483397121', '坐标转换', NULL, '点', '410', '2022-03-31', NULL, '该项工作已完成，后补。');
INSERT INTO `cmc_project_work` VALUES (1012, '1648881413500174338', '地形图测量', '1:2000', 'km²', NULL, '2022-03-24', NULL, '工作量待定，加强过程中与甲方的沟通，以实际完成工作量为准。');
INSERT INTO `cmc_project_work` VALUES (1013, '1648881413361762305', '以实地现状认定地类为原则，调查工作底图上每一块变化图斑的地类、属性、范围、权属等 实际情况；对实际地', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1014, '1648881413361762305', '以部下发的2021年度变更调查遥感监测成果为基础，结合各级2021年度内开展的月度、季度或半年监测发现的各类', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1015, '1648881413361762305', '（3）在2020年度国土调查数据库基础上，按照数据库更新技术要求，形成2021年度国土变更调查更新数据增量包', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1016, '1648881413361762305', '（4）部省组织专业队伍对2021年度变更调查更新数据的真实性，对内业核查发现的疑似错误图斑，作业单位实地', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1017, '1648881413361762305', '（4）部省组织专业队伍对2021年度变更调查更新数据的真实性，对内业核查发现的疑似错误图斑，作业单位实地', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1018, '1648881413361762305', '（6）部省市要求的关于2021年度国土变更调查除以上内容之外的相关工作。', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1019, '1648881414695550978', '格学村安置点', NULL, '项', '1', '2021-10-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1020, '1648881414695550978', '八吉村安置点', NULL, '项', '1', '2021-10-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1021, '1648881414695550978', '县城至绒盖乡段共选择5处拟选集中安置点', NULL, '项', '1', '2021-10-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1022, '1648881414695550978', '金沙集镇安置点', NULL, '项', '1', '2021-10-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1023, '1648881414695550978', '污水处理厂', NULL, '项', '1', '2021-10-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1024, '1648881414695550978', '五等控制点', '五等', '项', '1', '2021-10-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1025, '1648881414582304770', '控制点', 'E级', '点', '6', '2021-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1026, '1648881414582304770', '1:1000地形图', '1:1000', 'km²', '4.5', '2021-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1027, '1648881414582304770', '1:1000水下地形图', '1:1000', 'km²', '4.3', '2021-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1028, '1648881413806358530', '两河口水电站工程测量中心2022年度测绘服务', NULL, '项', '1', '2022-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1029, '1648881413512757249', '地形图测绘', '1:500', 'km²', '0.07', '2022-03-31', NULL, '共计14处，每处按0.005km²计');
INSERT INTO `cmc_project_work` VALUES (1030, '1648881413965742081', '四川大渡河双江口水电站枢纽工程测量中心2022年度测绘服务', NULL, '项', '1', '2022-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1031, '1648881414003490818', '地形图测绘', '1:2000', 'km²', '52.5', '2022-01-31', NULL, '预估工作量，以甲方指定及现场实际完成量为准。');
INSERT INTO `cmc_project_work` VALUES (1032, '1648881413512757249', '横断面测绘', '1:200', 'km²', '0.28', '2022-03-31', NULL, '共计14处，每处按0.02km计');
INSERT INTO `cmc_project_work` VALUES (1033, '1648881413512757249', '中桩放线', NULL, 'km', '1.44', '2022-03-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1034, '1648881413512757249', '三等GPS测量', '三等', '点', '19', '2022-03-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1035, '1648881413512757249', '高程测量', '三等', 'km', '30', '2022-03-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1036, '1648881413462425602', '业主营地地形测量', '1:500', 'm²', '43600', '2022-03-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1037, '1648881413462425602', '上下库连接路', '1:500', 'm²', '595960', '2022-03-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1038, '1648881413462425602', '左岸施工场地', '1:500', 'm²', '230000', '2022-03-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1039, '1648881414313869314', '外部供水线路1:2000地形图测绘', '1:2000', 'km²', '1.4', '2021-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1040, '1648881414313869314', '取水口1:500地形图测绘', '1:500', 'km²', '0.08', '2021-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1041, '1648881414674579458', '小水工业区外部供水地形图测量', '1:1000', 'km²', '0.55', '2021-10-15', NULL, 'D2000激光数据采集成图；内业委托光大测绘。');
INSERT INTO `cmc_project_work` VALUES (1042, '1648881414674579458', '无人机飞行', '1:1000', '人.天', '4', '0400-01-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1043, '1648881414674579458', '外业进出场', NULL, '人.天', '6', '2021-10-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1044, '1648881414175457281', '屋顶面积测绘', NULL, 'm²', '345241.29 ', '2021-12-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1045, '1648881413911216130', 'D级GNSS测量', 'D级', '点', '8', '2022-01-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1046, '1648881414313869314', '霞曲汇口1:1000地形地类图测绘', '1:1000', 'km²', '0.5', '2021-11-30', NULL, '采用无人机，外业1.4困难系数。');
INSERT INTO `cmc_project_work` VALUES (1047, '1648881413911216130', 'E级GNSS测量', 'E级', '点', '30', '2022-01-29', NULL, '全测区每隔3-5km左右布设一对E级GPS点；适当在E级GPS点间布设一级或二级导线加密点。尽量保证每个滩和码头');
INSERT INTO `cmc_project_work` VALUES (1048, '1648881413911216130', '五点导线测量（代替四等三角高程）', '五等', 'km', '27.6', '2022-01-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1049, '1648881413911216130', '航道整治工程1:2000江道图测绘（含水下）', '1:2000', 'km²', '28.38', '2022-01-29', NULL, '以项目部给定范围图为准（其中岸上14.74km²，水下13.64km²）');
INSERT INTO `cmc_project_work` VALUES (1050, '1648881413911216130', '礁石区及码头1:500地形图测绘（含水下）', '1:500', 'km²', '0.7', '2022-01-29', NULL, '预计礁石区2处，码头1个，现场确定范围');
INSERT INTO `cmc_project_work` VALUES (1051, '1648881413911216130', '洪水位点', NULL, '点', '50', '2022-01-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1052, '1648881413911216130', '坐标转换', NULL, '点', '128', '2022-01-29', NULL, '水库区新增勘探布置图（分公司评审后，通航建筑物新增勘探布置图（分公司评审后）需要坐标转换');
INSERT INTO `cmc_project_work` VALUES (1053, '1648881413860884481', '雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测（2022年）', NULL, '项', '1', '2022-12-31', NULL, '请按照合同要求开展监测工作');
INSERT INTO `cmc_project_work` VALUES (1054, '1648881413730861058', '西安路街道22个社区院落总平', '1:500', '项', '1', '2022-01-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1055, '1648881413730861058', '门卫室、楼道、建筑、围墙及大门等项目测绘', NULL, '项', '1', '2022-01-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1056, '1648881413605031938', '两河口移民代建工程施工测量测绘服务（2021）', NULL, '项', '1', '2021-12-31', NULL, '按现场1人，工作1年预算');
INSERT INTO `cmc_project_work` VALUES (1057, '1648881413441454081', '控制点测量', '五等', '点', '6', '2022-04-06', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1058, '1648881413441454081', '1:1000地形地类图测绘', '1:1000', 'km²', '1.66', '2022-04-06', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1059, '1648881413441454081', '1:2000地形地类图测绘', '1:2000', 'km²', '2.84', '2022-04-06', NULL, '需与1:1000的进行接边');
INSERT INTO `cmc_project_work` VALUES (1060, '1648881413428871170', '1:2000地形图补测', '1:2000', 'km²', '12.7', '2022-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1061, '1648881413428871170', '点云分类', '1:2000', 'km²', '123', '2022-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1062, '1648881413164630018', '地形图测绘', '1:500', 'km²', '0.02', '2022-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1063, '1648881413164630018', '水下地形图测绘', '1:1000', 'km²', '0.1', '2022-05-31', NULL, '2块');
INSERT INTO `cmc_project_work` VALUES (1064, '1648881413164630018', '五等GNSS测量', '五等', '点', '6', '2022-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1065, '1648881413164630018', '地形图测绘', '1:1000', 'km²', '1.4', '2022-05-31', NULL, '2块');
INSERT INTO `cmc_project_work` VALUES (1066, '1648881413009440769', '水库淹没影响示意图坐标转换（1954北京坐标转成2000国家大地坐标）', NULL, '点', '48', '2022-06-01', NULL, '6月1日完成');
INSERT INTO `cmc_project_work` VALUES (1067, '1648881413009440769', '水库淹没影响示意图gdb数据库制作', NULL, '点', '48', '2022-06-01', NULL, '6月1日完成');
INSERT INTO `cmc_project_work` VALUES (1068, '1648881413009440769', '五等GNSS测量', NULL, '点', '16', '2022-06-01', NULL, '6月1日完成');
INSERT INTO `cmc_project_work` VALUES (1069, '1648881413030412290', '施工用地范围图（可研）坐标转换（1954北京坐标转成2000国家大地坐标）', NULL, '点', '72', '2022-06-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1070, '1648881413030412290', '施工用地范围图（可研）gdb数据库制作', NULL, '点', '72', '2022-06-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1071, '1648881413030412290', '五等GNSS测量', '五等', '点', '12', '2022-06-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1072, '1648881412963303425', '控制测量', '四等', 'km', '150', '2022-08-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1073, '1648881412963303425', '1:2000地形图制作（内业）', '1:2000', 'km²', '20', '2022-07-10', NULL, '预估工作量');
INSERT INTO `cmc_project_work` VALUES (1074, '1648881412946526209', 'GNSS测量', 'E级', '点', '10', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1075, '1648881412946526209', '拟建场址地形图测绘', '1:500', 'km²', '26', '2022-06-16', NULL, '公司内业负责人：甘雨婷');
INSERT INTO `cmc_project_work` VALUES (1076, '1648881412946526209', '三角高程测量', '四等', 'km', '25', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1077, '1648881414456475649', '厂址区1:1000三维地形面制作', '1:1000', 'km²', '1.44', '2021-10-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1078, '1648881414456475649', '坝址区1:1000三维地形面制作', '1:1000', 'km²', '0.3', '2021-10-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1079, '1648881414456475649', '坐标转换', NULL, '点', '144', '2021-10-28', NULL, '已经做完');
INSERT INTO `cmc_project_work` VALUES (1080, '1648881412254466049', '鹿厂河-九里岗防火道路恢复重建工程1:1000地形图测绘', '1:1000', 'km²', '1.5', '2022-10-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1081, '1648881412254466049', 'E级GNSS测量', 'E级', '点', '12', '2022-10-15', NULL, '拟合高程');
INSERT INTO `cmc_project_work` VALUES (1082, '1648881410832596993', '叶巴滩坝址至混蓄下厂房河段水下地形图测绘', '1:500', 'km²', '3.25', '2023-03-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1083, '1648881410832596993', '叶巴滩坝址至混蓄下厂房河段横断面测量', '1:500', 'km', '4.5', '2023-03-30', NULL, '15条断面');
INSERT INTO `cmc_project_work` VALUES (1084, '1648881410832596993', '古巴沟渣场及环保专业所需地形图测量（含叶巴滩抽蓄电站下水库进/出水口1:1000地形图0.7km²）', '1:1000', 'km²', '9.6', '2023-03-12', NULL, 'CGCS2000坐标系、高程投影。与现有地形图（含水下地形）拼接完整，并提供无人机航拍高清影像。');
INSERT INTO `cmc_project_work` VALUES (1085, '1648881410832596993', '拉哇水库CS13~CS20河段地形图测绘（含水下地形图）', '1:500', 'km²', '3.6', '2023-03-30', NULL, '拉哇水库CS13~CS20河段约11km（含水下地形图测量）。');
INSERT INTO `cmc_project_work` VALUES (1086, '1648881414334840833', '产卵场地形图测绘（含水下）', '1:1000', 'km²', '0.63', '2021-11-18', NULL, '总价委托外。');
INSERT INTO `cmc_project_work` VALUES (1087, '1648881414276120578', '地形图测绘', '1:2000', 'km²', '10.37', '2021-11-30', NULL, '内、外业整体委外');
INSERT INTO `cmc_project_work` VALUES (1088, '1648881414276120578', '三维地形面制作', '1:2000', 'km²', '10.37', '2021-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1089, '1648881414192234498', '图根点', '图根', '点', '4', '2021-12-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1090, '1648881414192234498', '地形图测绘', '1:2000', 'km²', '8', '2021-12-10', NULL, '内业空三测图委外。');
INSERT INTO `cmc_project_work` VALUES (1091, '1648881414192234498', '无人机飞行', '1:2000', '人.天', '4', '2021-11-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1092, '1648881411319136258', '雅砻江桐子林水电站大坝外部变形和近坝区滑坡体观测（2023年）', NULL, '项', '1', '2023-12-31', NULL, '请按照合同要求开展监测工作');
INSERT INTO `cmc_project_work` VALUES (1093, '1648881411373662209', '断面基点复测、维护及断面测量、淤积分析', NULL, '项', '1', '2023-03-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1094, '1648881411252027394', '地形地类图测绘', '1:2000', 'km²', '8', '2023-02-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1095, '1648881411252027394', '地形地类图测绘', '1:5000', 'km²', '5.01', '2023-02-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1096, '1648881411252027394', '平面控制测量', '五等', '点', '9', '2023-02-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1097, '1648881411252027394', '高程控制测量', '四等', 'km', '9', '2023-02-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1098, '1648881411184918529', '地形图测绘', '1:500', 'km²', '0.1', '2023-02-17', NULL, '以甲方提供范围图为准。');
INSERT INTO `cmc_project_work` VALUES (1099, '1648881411184918529', '芦山县罗纯山和雨水两个公园涉及改造的地点在地形图中标识（定位）', '图根', '点', NULL, '2023-02-17', NULL, '工作量现场测量确定。');
INSERT INTO `cmc_project_work` VALUES (1100, '1648881411184918529', '平面控制测量', '五等', '点', '12', '2023-02-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1101, '1648881411184918529', '高程控制测量', '四等', 'km', '2', '2023-02-17', NULL, '预估（每处内部联通）');
INSERT INTO `cmc_project_work` VALUES (1102, '1648881410929065985', 'GNSS平面控制测量', '四等', '点', '6', '2023-03-10', NULL, '上下库各布设3点，提供两套坐标（CGCS2000坐标和CGCS2000高程投影坐标）');
INSERT INTO `cmc_project_work` VALUES (1103, '1648881410929065985', '高程控制测量', '四等', 'km', '33', '2023-03-10', NULL, 'GNSS网高程测量，联测国家水准点。工程量为预估量，以实际工程量计算。');
INSERT INTO `cmc_project_work` VALUES (1104, '1648881410878734337', '断面测量', '1:1000', 'km', '1.8', '2023-03-30', NULL, '8条断面');
INSERT INTO `cmc_project_work` VALUES (1105, '1648881410929065985', '地形地类图测绘', '1:2000', 'km²', '9.2', '2023-03-10', NULL, '其中3.35平方按照1:1000精度进行数据采集（范围见kml文件）');
INSERT INTO `cmc_project_work` VALUES (1106, '1648881410878734337', '断面基点测量', '五等/四等', '点', '16', '2023-03-30', NULL, '每条断面2个基点。');
INSERT INTO `cmc_project_work` VALUES (1107, '1648881410878734337', '地形图测绘（含水下地形图）', '1:1000', 'km²', '0.74', '2023-03-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1108, '1648881411033923585', '断面测量', '1:500', 'km', '3.2', '2023-02-20', NULL, '9条断面');
INSERT INTO `cmc_project_work` VALUES (1109, '1648881411033923585', '断面基点测量', '五等', '点', '18', '2023-02-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1110, '1648881411033923585', '两河口电站尾水出口以下3.95km河段水下地形测绘', '1:1000', 'km²', '0.31', '2023-02-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1111, '1648881411033923585', '两河口电站尾水出口以下3.95km河段水边线测量', '1:1000', 'km', '3.95', '2023-02-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1112, '1648881411033923585', '流量测验', NULL, '个', '1', '2023-02-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1113, '1648881410878734337', '水面线测量', '1:1000', 'km', '5.3', '2023-03-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1114, '1648881411017146369', '断面基点测量', '五等/四等', '点', '84', '2023-03-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1115, '1648881410878734337', '流量测验', NULL, '个', '1', '2023-03-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1116, '1648881410899705858', '永久界桩搬运、开挖、安装、埋设', NULL, '根', '158', '2023-04-30', NULL, '预计3月底封库令下来后，开展界桩埋设工作，界桩预制工作根据情况提前准备');
INSERT INTO `cmc_project_work` VALUES (1117, '1648881412699062273', '三等GNSS测量', '三等', '点', '6', '2022-07-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1118, '1648881412699062273', '四等GNSS测量', '四等', '点', '4', '2022-07-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1119, '1648881412699062273', '四等高程测量', '四等', 'km', '16', '2022-07-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1120, '1648881412699062273', '工程区1:2000地形地类图测绘', '1:2000', 'km²', '14.99', '2022-07-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1121, '1648881412699062273', '上游河段区域1:5000地形地类图测绘', '1:5000', 'km²', '1.83', '2022-07-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1122, '1648881412648730625', '五等GNSS测量', '五等', '点', '4', '2022-07-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1123, '1648881412648730625', 'CZTL康定段征地拆迁安置点规划设计项目1:500地形图测绘', '1:500', 'km²', '0.15', '2022-07-15', NULL, '大地2000坐标系，85国家高程基准；地块比较平，看给排水的接口还有电力等涉及到地块的可以多测些');
INSERT INTO `cmc_project_work` VALUES (1124, '1648881412535484418', '勘测定界技术报告', NULL, '亩', '44250', '2022-08-31', NULL, '土地权属调查、分类面积表、分类范围略图、界址坐标表等');
INSERT INTO `cmc_project_work` VALUES (1125, '1648881412535484418', '报件', NULL, '项', '1', '2022-08-31', NULL, '土地预审与选址意见书办理');
INSERT INTO `cmc_project_work` VALUES (1126, '1648881412535484418', '勘测定界测量', NULL, '点', '355', '2022-08-31', NULL, '界址点测量（界址点距离不超过150米）、制桩、运输、埋设');
INSERT INTO `cmc_project_work` VALUES (1127, '1648881412384489473', '按照不动产统一登记及不动产权籍调查要求，开展广元市昭化区林权权籍补充调查，核实存量林权登记数据及标准', NULL, '项', '1', '2023-06-30', NULL, '约 35万宗');
INSERT INTO `cmc_project_work` VALUES (1128, '1648881412023779329', '勘探放样', NULL, '个', '8', '2022-11-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1129, '1648881411868590081', '测量', NULL, '项', '1', '2022-12-05', NULL, '报价16万元');
INSERT INTO `cmc_project_work` VALUES (1130, '1648881412040556545', '仪陇县林权数据整合建库采购项目（基础数据收集、档案数据数字化扫描、存量（已有登记数据）数据整合、补充', NULL, '项', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1131, '1648881411868590081', '勘察', NULL, '项', '1', '2022-12-05', NULL, '报价17.3万元');
INSERT INTO `cmc_project_work` VALUES (1132, '1648881411944087553', '尼呷2#承包商营地及施工场地1:500地形图测绘', '1:500', 'km²', '0.35', '2022-11-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1133, '1648881411067478017', 'GNSS测量', '三等', '点', '117', '2023-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1134, '1648881411067478017', '导线测量', '五等', 'km', '277', '2023-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1135, '1648881411067478017', '水准测量', '三等', 'km', '554', '2023-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1136, '1648881411067478017', '水位站高程引测', '四等', '个', '7', '2023-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1137, '1648881411067478017', 'GNSS测量', '二等', '点', '5', '2023-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1138, '1648881411067478017', '断面基点测量', '五等', '点', '396', '2023-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1139, '1648881411067478017', '断面测量', '1:1000', 'km', '198', '2023-04-20', NULL, '2023年泥沙断面测量，198条，每条暂按500m计。2024年再次施测内容及要求同上。');
INSERT INTO `cmc_project_work` VALUES (1140, '1648881411138781186', '工程区三维地形面制作（含独曲水下地形）', '1:5000', 'km²', '32', '2023-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1141, '1648881410962620417', '渣场、施工及交通地形图测绘', '1:2000', 'km²', '7.1', '2023-03-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1142, '1648881410962620417', '砂岩料场地形图测绘', '1:1000', 'km²', '0.59', '2023-03-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1143, '1648881411138781186', '上、下水库地形地类图测绘（含独曲水下地形）', '1:2000', 'km²', '11', '2023-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1144, '1648881411138781186', '上、下水库三维地形面制作（含独曲水下地形）', '1:2000', 'km²', '11', '2023-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1145, '1648881411138781186', '平面控制测量', '五等', '点', '6', '2023-05-31', NULL, '上、下库各布设3个控制点。');
INSERT INTO `cmc_project_work` VALUES (1146, '1648881410962620417', '灰岩料场地形图测绘', '1:1000', 'km²', '0.42', '2023-03-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1147, '1648881411138781186', '高程控制测量', '四等', 'km', '20', '2023-05-31', NULL, '上、下库联通。');
INSERT INTO `cmc_project_work` VALUES (1148, '1648881411138781186', '大断面测量', '1:500', 'km', '3.2', '2023-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1149, '1648881411050700802', '地质图数字化', NULL, '件', '5', '2023-02-28', NULL, '矢量图转化');
INSERT INTO `cmc_project_work` VALUES (1150, '1648881411084255234', '坝区地形图测绘', '1:2000', 'km²', '1.94', '2023-03-13', NULL, '需形成三维地形面');
INSERT INTO `cmc_project_work` VALUES (1151, '1648881411050700802', '坝区地形图测绘', '1:2000', 'km²', '0.76', '2023-02-28', NULL, '三维地形面');
INSERT INTO `cmc_project_work` VALUES (1152, '1648881410979397634', '立面测绘', '建筑设计图标准', 'm²', '105000', '2023-02-28', NULL, '测绘范围以设计院拟定为主，工作量为预估。成果为dwg电子版。');
INSERT INTO `cmc_project_work` VALUES (1153, '1648881410979397634', '平面测绘', '1:500', 'm²', '15000', '2023-02-28', NULL, '测绘范围以设计院拟定为主，工作量为预估。成果为dwg电子版。');
INSERT INTO `cmc_project_work` VALUES (1154, '1648881411533045762', 'GNSS测量', '四等', '点', '6', '2023-02-24', NULL, '提供两套坐标（CGCS2000坐标和CGCS2000高程投影坐标）');
INSERT INTO `cmc_project_work` VALUES (1155, '1648881411533045762', '四等高程测量', '四等', 'km', '8', '2023-02-24', NULL, 'GNSS网高程测量');
INSERT INTO `cmc_project_work` VALUES (1156, '1648881411457548290', '工程区地形图测绘', '1:1000', 'km²', '11.9', '2023-02-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1157, '1648881411457548290', '工程区三维地形面', '1:1000', 'km²', '11.9', '2023-02-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1158, '1648881411457548290', '平面GNSS控制测量', '四等', '个', '6', '2023-02-20', NULL, '需提供两套坐标（CGCS2000坐标和CGCS2000高程投影坐标）');
INSERT INTO `cmc_project_work` VALUES (1159, '1648881411457548290', '高程控制测量', '四等', 'km', '10', '2023-02-20', NULL, '数量为估算工程量，以实际发生量结算。需联测国家高级水准点。');
INSERT INTO `cmc_project_work` VALUES (1160, '1648881411268804610', '四川省雅砻江两河口水电站工程测量中心服务（2023年）', NULL, '项', '1', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1161, '1648881411533045762', '工程区1:1000地形图测绘', '1:1000', 'km²', '5.7', '2023-02-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1162, '1648881411298164738', '四川省脚木足河巴拉水电站工程测量中心技术服务(2023年)', NULL, '项', '1', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1163, '1648881410962620417', 'GNSS平面控制测量', '四等', '点', '6', '2023-03-15', NULL, '需提供两套坐标（CGCS2000坐标和CGCS2000高程投影坐标）');
INSERT INTO `cmc_project_work` VALUES (1164, '1648881410962620417', '高程控制测量', '四等', 'km', '5', '2023-03-15', NULL, '以实际发生量结算。需联测国家高级水准点。');
INSERT INTO `cmc_project_work` VALUES (1165, '1648881411138781186', '独曲水边线测量', NULL, NULL, NULL, '2023-05-31', NULL, '长度及比例尺需要和甲方沟通确认。');
INSERT INTO `cmc_project_work` VALUES (1166, '1648881410962620417', '枢纽区地形图测绘及三维地形面', '1:1000', 'km²', '9.5', '2023-03-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1167, '1648881411499491383', '地形图测绘', '1:500', 'km²', '0.1', NULL, NULL, '完成时间与用户沟通');
INSERT INTO `cmc_project_work` VALUES (1168, '1648881410631270406', '地形图测绘', '1:500', 'km²', '0.065', '2023-05-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1169, '1648881411138781186', '工程区地形图测绘（含独曲水下地形）', '1:5000', 'km²', '32', '2023-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1170, '1648881411772121090', '施工总布置范围1:2000地形地类图测绘', '1:2000', 'km²', '10.10', '2022-12-31', NULL, '桑其柯左岸上水库以南方向，及相应桑其柯右岸200m');
INSERT INTO `cmc_project_work` VALUES (1171, '1648881411772121090', '沿盘龙沟施工临建范围1:2000地形地类图测绘', '1:2000', 'km²', '0.93', '2022-12-31', NULL, '沿盘龙沟3km范围，左岸测200m，右岸侧至水边线，遇台地地形时测到台地外侧100m');
INSERT INTO `cmc_project_work` VALUES (1172, '1648881411826647041', '工程区1:2000地形图测绘', '1:2000', 'km²', '8.1', '2022-12-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1173, '1648881411772121090', '沿桑其柯对外交通范围1:2000地形地类图测绘', '1:2000', 'km²', '3.4', '2022-12-31', NULL, '从下水库坝线下游3.7km（直线距离）处测至桑其柯与庆大河汇口（含庆大河跨河桥），左、右岸均测200m。其中');
INSERT INTO `cmc_project_work` VALUES (1174, '1648881411826647041', '工程区1:2000三维地形面制作', '1:2000', 'km²', '8.1', '2022-12-21', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1175, '1648881411826647041', '控制点', '五等', '点', '6', '2022-12-17', NULL, '控制点数量、等级技术部门根据实际情况确定。');
INSERT INTO `cmc_project_work` VALUES (1176, '1648881411772121090', '上、下水库范围1:1000地形地类图测绘', '1:1000', 'km²', '2.03', '2022-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1177, '1648881411772121090', '沿庆大河对外交通范围1:2000地形地类图测绘', '1:2000', 'km²', '8.08', '2022-12-31', NULL, '从桑其柯与庆大河汇口测至国道G350（色卡乡交叉点）左、右岸均测200m');
INSERT INTO `cmc_project_work` VALUES (1178, '1648881411772121090', '沥青混凝土骨料场1:1000地形地类图测绘', '1:1000', 'km²', '5.27', '2022-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1179, '1648881411772121090', 'GNSS测量', '四等', '点', '12', '2022-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1180, '1648881411772121090', '高程测量', '四等', 'km', '65', '2022-12-31', NULL, '包含料场6km');
INSERT INTO `cmc_project_work` VALUES (1181, '1648881411772121090', 'GNSS测量', '五等', '点', '3', '2022-12-31', NULL, '料场');
INSERT INTO `cmc_project_work` VALUES (1182, '1648881410945843202', '首部工区场地地形地类图测绘', '1:1000', 'km²', '0.19', '2023-06-30', NULL, '现有地形图制作成地形地类图');
INSERT INTO `cmc_project_work` VALUES (1183, '1648881410945843202', '普沙绒工区场地地形地类图测绘', '1:1000', 'km²', '3.92', '2023-06-30', NULL, '现有地形图为1：2000，需重新实测。（2023.5月修改备注信息）');
INSERT INTO `cmc_project_work` VALUES (1184, '1648881410945843202', '业主营地比选场地地形地类图测绘', '1:1000', 'km²', '0.47', '2023-06-30', NULL, '现有地形图制作成地形地类图');
INSERT INTO `cmc_project_work` VALUES (1185, '1648881410945843202', '1#承包商营地场地地形地类图测绘', '1:1000', 'km²', '0.19', '2023-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1186, '1648881410945843202', '2#混凝土系统场地地形地类图测绘', '1:1000', 'km²', '0.12', '2023-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1187, '1648881410945843202', '木托组工区场地地形地类图测绘', '1:1000', 'km²', '0.44', '2023-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1188, '1648881410945843202', '马蹄村工区场地地形地类图测绘', '1:1000', 'km²', '1.19', '2023-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1189, '1648881411122003970', '工程区三维地形面制作（含措格龙沟水下地形）', '1:5000', 'km²', '24', '2023-03-05', NULL, '需形成三维地形面');
INSERT INTO `cmc_project_work` VALUES (1190, '1648881411122003970', '上、下水库地形地类图测绘（含措格龙沟水下地形）', '1:2000', 'km²', '6', '2023-03-05', NULL, '需形成三维地形图');
INSERT INTO `cmc_project_work` VALUES (1191, '1648881411122003970', '上、下水库三维地形面制作（含措格龙沟水下地形）', '1:2000', 'km²', '6', '2023-03-05', NULL, '需形成三维地形面');
INSERT INTO `cmc_project_work` VALUES (1192, '1648881411122003970', '平面控制测量', '五等', '点', '6', '2023-03-05', NULL, '上、下库分别布设3个控制点。');
INSERT INTO `cmc_project_work` VALUES (1193, '1648881411122003970', '高程控制测量', '四等', 'km', '5', '2023-03-05', NULL, '上、下库联通。');
INSERT INTO `cmc_project_work` VALUES (1194, '1648881411122003970', 'SHP格式成果', NULL, NULL, NULL, NULL, NULL, '范围线、等高线、地类图斑');
INSERT INTO `cmc_project_work` VALUES (1195, '1648881410945843202', '牙根二级及楞古工区施工总布置范围地形地类图测绘', '1:5000', 'km²', '297', '2023-06-30', NULL, '现有地形图制作成地形地类图');
INSERT INTO `cmc_project_work` VALUES (1196, '1648881410899705858', '加密界桩搬运、开挖、安装、埋设', NULL, '根', '130', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1197, '1648881410899705858', '临时界桩搬运、开挖、安装、埋设', NULL, '根', '84', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1198, '1648881410899705858', '电子桩', NULL, '根', '65', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1199, '1648881410899705858', '永久界桩、加密界桩、临时界桩放线与测量', NULL, '个', '372', '2023-04-30', NULL, '控制工作根据现场情况而定。');
INSERT INTO `cmc_project_work` VALUES (1200, '1648881410899705858', '征地界桩配合测量', NULL, '人.天', '60', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1201, '1648881410899705858', '界桩点展绘、绘制红线图、用地SHP文件转制等', NULL, '人.天', '28', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1202, '1648881410899705858', '临时占地及青苗补偿', NULL, '个', '372', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1203, '1648881410899705858', 'GNSS平面控制测量', '三等', '点', '11', '2023-04-30', NULL, '覆盖大坝、坝上、坝下、支流，引测已知点3点');
INSERT INTO `cmc_project_work` VALUES (1204, '1648881410899705858', '高程控制测量', '三等', 'km', '42', '2023-04-30', NULL, '预估工程量（单边21km），以实际发生计算。');
INSERT INTO `cmc_project_work` VALUES (1205, '1648881410945843202', '水库区地形地类图测绘', '1:2000', 'km²', '5.8', '2023-06-30', NULL, '库区2520m高程以下');
INSERT INTO `cmc_project_work` VALUES (1206, '1648881410945843202', '工程区进场道路地形图测绘', '1:2000', 'km²', '44', '2023-06-30', NULL, '范围：沙德镇至工程区。旧图更新。');
INSERT INTO `cmc_project_work` VALUES (1207, '1648881410631270403', '激光点云采集', '1:500', 'km²', '33', '2023-05-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1208, '1648881410945843202', '拉最工区场地地形地类图测绘', '1:1000', 'km²', '0.63', '2023-06-30', NULL, '现有地形图制作成地形地类图');
INSERT INTO `cmc_project_work` VALUES (1209, '1648881411000369153', '厂址区雅鲁藏布江河道水下地形图测绘', '1:1000', 'km²', '1.88', '2023-03-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1210, '1648881411000369153', 'GNSS测量', '四等', '点', '5', '2023-03-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1211, '1648881410631270404', '工程地质勘察', NULL, '项', '1', NULL, NULL, '时间待定，以甲方通知为准。');
INSERT INTO `cmc_project_work` VALUES (1212, '1648881410631270404', '地形图测绘', '1:500', 'km²', '28.5', NULL, NULL, '时间待定，以甲方通知为准。');
INSERT INTO `cmc_project_work` VALUES (1213, '1648881410849374209', '地形图测绘', '1:2000', 'km²', '6.8', '2023-03-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1214, '1648881410849374209', '地形图测绘', '1:5000', 'km²', '23.9', '2023-03-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1215, '1648881410631270404', 'GNSS测量', '三等', '个', '4', NULL, NULL, '登记为美玉场址控制点；田妥控制测量待定。');
INSERT INTO `cmc_project_work` VALUES (1216, '1648881410631270404', 'GNSS测量', '四等', '个', '18', NULL, NULL, '登记为美玉场址控制点；田妥控制测量待定。');
INSERT INTO `cmc_project_work` VALUES (1217, '1648881410631270404', '高程测量', '四等', 'km', '60', NULL, NULL, '登记为美玉场址控制测量，单程双测；田妥控制测量待定。');
INSERT INTO `cmc_project_work` VALUES (1218, '1648881411122003970', '工程区地形图测绘（含措格龙沟水下地形）', '1:5000', 'km²', '24', '2023-03-05', NULL, '需形成三维地形图');
INSERT INTO `cmc_project_work` VALUES (1219, '1648881411499491384', '库区道路边沟坐标高程测量', '图根', '点', NULL, NULL, NULL, '沟底、井盖三维数据采集，约1.6公里。');
INSERT INTO `cmc_project_work` VALUES (1220, '1648881412845862913', '奔戈光伏场址1:2000地形图测绘', '1:2000', 'km²', '96.36', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1221, '1648881412845862913', '集电线路1:2000地形图测绘', '1:2000', 'km²', '10', '2022-06-20', NULL, '位于拉科光伏项目范围，内业由航测遥感中心二组负责。');
INSERT INTO `cmc_project_work` VALUES (1222, '1648881412845862913', '南桠光伏场址1:2000地形图测绘', '1:2000', 'km²', '13.07', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1223, '1648881412845862913', 'GNSS测量', 'E级', '点', '10', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1224, '1648881412845862913', '三角高程测量', '四等', 'km', '45', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1225, '1648881412682285058', '三等GNSS测量', '三等', '点', '15', '2022-07-25', NULL, '含3个已知点。');
INSERT INTO `cmc_project_work` VALUES (1226, '1648881412682285058', '四等高程测量', '四等', 'km', '30', '2022-07-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1227, '1648881412682285058', '工程区1:5000地形图测绘', '1:5000', 'km²', '147', '2022-07-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1228, '1648881412682285058', '右岸方案上库范围1:2000地形图测绘', '1:2000', 'km²', '4.569', '2022-07-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1229, '1648881412682285058', '右岸方案下库进出水口1:2000地形图测绘', '1:2000', 'km²', '2.873', '2022-07-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1230, '1648881411730178050', '断面基点测量', '五等/四等', '点', '30', '2022-12-24', NULL, '按实地情况布设');
INSERT INTO `cmc_project_work` VALUES (1231, '1648881411730178050', '叶巴滩坝址至混蓄下厂房河段的1:500横断面测量', '1:500', 'km', '4.5', '2022-12-24', NULL, '15个大横断面，测量长度约4500m（按300m河宽估算）');
INSERT INTO `cmc_project_work` VALUES (1232, '1648881411730178050', '叶巴滩坝址至混蓄下厂房河段1:500地形图测绘（含水下）', '1:500', 'km²', '3.25', '2022-12-24', NULL, '测量河段长度共13km，测量主要为水下地形测量，两岸水上部分测至高程2750m');
INSERT INTO `cmc_project_work` VALUES (1233, '1648881410912288769', '工程区地形图测绘', '1:2000', 'km²', '2', '2023-03-14', NULL, '需制作三维地形面');
INSERT INTO `cmc_project_work` VALUES (1234, '1648881410790653953', '枢纽区像片连测', NULL, 'km²', '5', '2023-04-21', NULL, '像控点');
INSERT INTO `cmc_project_work` VALUES (1235, '1648881410790653953', '枢纽区可量测三维实景模型', NULL, 'km²', '5', '2023-04-21', NULL, '清晰度高，可以量测坐标和高程');
INSERT INTO `cmc_project_work` VALUES (1236, '1648881410912288769', '工程区地形图测绘', '1:5000', 'km²', '12.6', '2023-03-14', NULL, '需制作三维地形面');
INSERT INTO `cmc_project_work` VALUES (1237, '1648881410790653953', '配合地质专业危岩体地质复核测量', NULL, '人.天', '8', '2023-03-31', NULL, '预计2人4天，主要工作可能现场要拍照及其他测量工作。');
INSERT INTO `cmc_project_work` VALUES (1238, '1648881410790653953', '枢纽区无人机影像数据采集（倾斜摄影）', NULL, 'km²', '5', '2023-04-21', NULL, '影像地面分辨率优于5cm');
INSERT INTO `cmc_project_work` VALUES (1239, '1648881410832596993', 'GNSS测量', '三等', '点', '9', '2023-04-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1240, '1648881410832596993', '三角高程测量', '三等', 'km', '29', '2023-04-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1241, '1648881410660630529', 'GNSS平面控制', '五等', '点', '6', '2023-04-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1242, '1648881410677407746', '1:2000激光数据采集', '1:2000', 'km²', '40.362', '2023-04-08', NULL, '预估工作量，具体根据现场情况执行');
INSERT INTO `cmc_project_work` VALUES (1243, '1648881410761293825', '卫星导航定位基准站普查维护工作', NULL, '座', '12', '2023-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1244, '1648881411281387521', '四川大渡河双江口水电站枢纽工程测量中心2023年度测绘服务', NULL, '项', '1', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1245, '1648881410778071042', 'ML坝址区实景三维模型制作（影像地面分辨率优于5cm）', '1:500', 'km²', '143', '2023-06-08', NULL, '提供CGCS2000和米林2000 2套成果');
INSERT INTO `cmc_project_work` VALUES (1246, '1648881410778071042', 'ML库区电子沙盘制作（利用已有资料，影像地面分辨率优于20cm）', '1:2000', 'km²', '490', '2023-05-08', NULL, '提供CGCS2000和米林2000 2套成果');
INSERT INTO `cmc_project_work` VALUES (1247, '1648881410761293825', '一等水准点普查维护工作', NULL, '座', '45', '2023-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1248, '1648881410761293825', '二等水准点普查维护工作', NULL, '座', '22', '2023-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1249, '1648881410761293825', '依法建立与2000国家大地坐标系相联系的地方独立坐标系D级控制网普查维护工作', NULL, '座', '7', '2023-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1250, '1648881410761293825', '三等水准点普查维护工作', NULL, '座', '3', '2023-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1251, '1648881410744516610', '对外交通地形图更新及局部地形图补测', '1:2000', 'km²', '原地形图量+1.45补测', '2023-04-10', NULL, '1、范围：对外交通沿线，立丘河G248白马隧道出口至立丘河与雅砻江交汇口。2、原地形图更新（老路、房屋、铁');
INSERT INTO `cmc_project_work` VALUES (1252, '1648881410866151425', '地形图测绘', '1:5000', 'km²', '400', '2023-03-21', NULL, '还有4块暂未落实，已落实工作量375平方公里');
INSERT INTO `cmc_project_work` VALUES (1253, '1648881410866151425', '地形图测绘', '1:2000', 'km²', '6.9', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1254, '1648881410815819777', '业主营地、承包商1#营地、承包商2#营地地形图测绘', '1:1000', 'km²', '0.2', '2023-03-15', NULL, '委外（人工测图）');
INSERT INTO `cmc_project_work` VALUES (1255, '1648881410815819777', '平面控制测量', '图根', '点', '6', '2023-03-15', NULL, '两个区域分别布设3个点。');
INSERT INTO `cmc_project_work` VALUES (1256, '1648881410815819777', '高程控制测量', '四等', 'km', '2', '2023-03-15', NULL, '估算工程量，两个区域分别串联。');
INSERT INTO `cmc_project_work` VALUES (1257, '1648881410815819777', '困牛山水库水下地形测绘', '1:1000', 'km²', '0.2', '2023-03-15', NULL, '激光技术中心朱倪强完成水下地形测绘。');
INSERT INTO `cmc_project_work` VALUES (1258, '1648881410694184962', '工程区1:2000地形图测绘', '1:2000', 'km²', '9.6', '2023-04-05', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1259, '1648881411105226753', '平面控制测量', '五等', '点', '6', '2023-02-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1260, '1648881411105226753', '高程控制测量', '四等', 'km', '3', '2023-02-24', NULL, '控制点高程内部联测。');
INSERT INTO `cmc_project_work` VALUES (1261, '1648881411105226753', '地形图测绘', '1:2000', 'km²', '1.1', NULL, NULL, '增加测图范围，2023.3.16');
INSERT INTO `cmc_project_work` VALUES (1262, '1648881410727739393', 'GNSS平面控制测量', '四等', '点', '8', '2023-04-05', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1263, '1648881411105226753', '地形图测绘', '1:2000', 'km²', '15.67', '2023-02-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1264, '1648881410727739393', '高程控制测量', '四等', 'km', '20', '2023-04-05', NULL, '三角测量');
INSERT INTO `cmc_project_work` VALUES (1265, '1648881410710962177', '地形图测绘', '1:2000', 'km²', '8.1', '2023-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1266, '1648881410727739393', '工程区地形图测绘', '1:5000', 'km²', '15.63', '2023-04-05', NULL, '制作三维地形面');
INSERT INTO `cmc_project_work` VALUES (1267, '1648881410694184962', '工程区1:5000地形图测绘', '1:5000', 'km²', '25.2', '2023-04-05', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1268, '1648881410694184962', '控制点', '五等', '点', '6', '2023-04-05', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1269, '1648881410832596993', '拉哇水库CS20~拉哇坝址河段带状地形测绘（不含水下地形图）', '1:2000', 'km²', '31', '2023-04-17', NULL, '待项目部评估核实后再实施测量');
INSERT INTO `cmc_project_work` VALUES (1270, '1648881410660630529', '工程区地形图测绘', '1:2000', 'km²', '12.56', '2023-04-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1271, '1648881410534801409', 'GNSS测量', '五等', '点', '3', '2023-04-21', NULL, '2000国家大地坐标系。名山工业园高程系');
INSERT INTO `cmc_project_work` VALUES (1272, '1648881410534801409', '三角高程', '四等', 'km', '1', '2023-04-21', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1273, '1648881411499491373', '地形图测绘（含水下地形）', '1:500', 'km²', '0.48', '2023-07-03', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1274, '1648881410534801409', '地形图测绘', '1:500', 'km²', '0.1', '2023-04-21', NULL, '范围内房屋等不测，要求道路要测准。');
INSERT INTO `cmc_project_work` VALUES (1275, '1648881411499491377', '耕地解译-航飞范围（影像地面分辨率优于20cm）', '1:2000', 'km²', '1500', '2023-07-25', NULL, '项目负责人与甲方沟通后商定资料提交时间为7月25日。');
INSERT INTO `cmc_project_work` VALUES (1276, '1648881411499491377', '耕地解译-遥感影像范围（影像空间分辨率优于1.0m）', '1:10000', 'km²', '1000', '2023-07-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1277, '1648881411499491377', '地形图搜集', '1:10000', 'km²', '2500', '2023-06-07', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1278, '1648881411499491377', 'DOM制作', NULL, 'km²', '2500', '2023-08-25', NULL, '其中1500km²分辨率优于20cm；1000km²分辨率优于1米。');
INSERT INTO `cmc_project_work` VALUES (1279, '1648881411499491376', '排涝区域地形图测绘', '1:2000', 'km²', '20', '2023-08-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1280, '1648881411499491373', '横断面测量', '1:500', 'km', '0.2', '2023-07-03', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1281, '1648881411499491376', '1:500、1:1000地形图缩编', '1:2000', 'km²', '12', '2023-08-15', NULL, '枢纽区、防洪堤现有地形图缩编、拼接。');
INSERT INTO `cmc_project_work` VALUES (1282, '1648881411499491376', '地形图拼接', '1:2000', 'km²', '8', '2023-08-15', NULL, '航道整治区现有地形图拼接。');
INSERT INTO `cmc_project_work` VALUES (1283, '1648881411499491372', '汤坝居民点取水枢纽地形图测绘', '1:500', 'km²', '0.1', '2023-07-17', NULL, '范围为沟底高程2100m～2500m之间，沟两侧岸坡各测20m宽');
INSERT INTO `cmc_project_work` VALUES (1284, '1648881411499491372', '取水口至临时板房段地形地类图测绘', '1:1000', 'km²', '0.14', '2023-07-17', NULL, '测量范围：取水口至临时板房段无硬化道路，只存在金汤集镇供水工程取水枢纽施工临时便道，测量范围为汤坝沟');
INSERT INTO `cmc_project_work` VALUES (1285, '1648881411499491372', '临时板房至跨沟桥（沟边净水厂）段地形地类图测绘', '1:1000', 'km²', '0.21', '2023-07-17', NULL, '测量范围：临时板房至跨沟桥段道路已硬化，测量范围为汤坝沟左岸与临时板房至跨沟桥段道路之间区域，同时需');
INSERT INTO `cmc_project_work` VALUES (1286, '1648881411499491372', '跨沟桥至居民点段地形地类图测绘', '1:1000', 'km²', '0.14', '2023-07-17', NULL, '测量范围：沿着汤坝沟左岸测量，测量范围为汤坝沟左岸至山脚处之间区域，宽度100m左右，部分地形较陡区域可');
INSERT INTO `cmc_project_work` VALUES (1287, '1648881411499491372', '汤坝寨子场地地形地类图测绘', '1:500', 'km²', '0.17', '2023-07-17', NULL, 'CAD图红色框框范围');
INSERT INTO `cmc_project_work` VALUES (1288, '1648881411499491372', '汤坝料场地形图测绘', '1:1000', 'km²', '0.976', '2023-07-17', NULL, '奥维红色范围，扣除原有面积');
INSERT INTO `cmc_project_work` VALUES (1289, '1648881411499491372', 'GNSS平面控制测量', '四等', '点', '4', '2023-07-17', NULL, '新建2点，联测2点');
INSERT INTO `cmc_project_work` VALUES (1290, '1648881411499491372', '高程控制测量', '四等', 'km', '8.00', '2023-07-17', NULL, '三角高程测量');
INSERT INTO `cmc_project_work` VALUES (1291, '1648881411499491369', '地形图测绘（含水下地形）', '1:2000', 'km²', '1.5', '2023-07-12', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1292, '1648881411499491369', 'GNSS平面控制测量', '四等', '点', '4', '2023-07-12', NULL, '新建2点，联测2点。');
INSERT INTO `cmc_project_work` VALUES (1293, '1648881411499491369', '高程控制测量', '四等', 'km', '4', '2023-07-12', NULL, '三角高程');
INSERT INTO `cmc_project_work` VALUES (1294, '1648881410631270410', '土方量计算', NULL, '项', '1', '2023-07-19', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1295, '1648881410631270410', 'GNSS平面控制测量', NULL, '点', '3', '2023-07-19', NULL, '根据现场情况确定等级。');
INSERT INTO `cmc_project_work` VALUES (1296, '1648881410631270410', '高程控制测量', NULL, 'km', NULL, '2023-07-19', NULL, '根据现场情况确定等级和工作量。');
INSERT INTO `cmc_project_work` VALUES (1297, '1648881410631270410', '土方平衡报告', NULL, '项', '1', '2023-07-19', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1298, '1648881412422238210', '新建断面布设:大坝上游坝面至二干01断面之间新增的4条断面选定及断面标志布设。', NULL, NULL, NULL, '2023-05-31', NULL, '自合同生效之日起，至2023年5月31日止。具体工期要求如下:(1）2022年5月30日前，完成项目启动和提交工作大');
INSERT INTO `cmc_project_work` VALUES (1299, '1648881412422238210', '断面基点校测及维护:包括76条断面（含新建断面）基点坐标校测，损坏的断面基点或断面标志恢复，断面标志重', NULL, NULL, NULL, NULL, NULL, '(4）2023年2月28日前，提交水库泥沙断面测量报告初稿（纸质15份全部采用彩色印刷，相应电子文档），并做好');
INSERT INTO `cmc_project_work` VALUES (1300, '1648881412422238210', '新建断面布设:大坝上游坝面至二干01断面之间新增的4条断面选定及断面标志布设。', NULL, NULL, NULL, NULL, NULL, '(5）2023年4月30日前(具体时间根据专家审查会议确定)，根据专家审查意见补充完善水库泥沙断面测量报告，提');
INSERT INTO `cmc_project_work` VALUES (1301, '1648881412346740737', '右岸方案1:2000地形图测绘（岸上）', '1:2000', 'km²', '9.53', '2022-08-31', NULL, '同时提供三维地形面');
INSERT INTO `cmc_project_work` VALUES (1302, '1648881412346740737', '右岸方案1:2000地形图测绘（水下）', '1:2000', 'km²', '0.48', '2022-08-31', NULL, '同时提供三维地形面');
INSERT INTO `cmc_project_work` VALUES (1303, '1648881412346740737', '四等GNSS测量', '四等', '点', '10', '2022-08-31', NULL, '联测水库已知控制点3点');
INSERT INTO `cmc_project_work` VALUES (1304, '1648881412346740737', '四等三角高程测量', '四等', 'km', '30', '2022-08-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1305, '1648881412271243265', '拟建场址1:500地形图测绘', '1:500', 'km²', '13.8', '2022-09-30', NULL, '具体范围详见附件，最终测绘面积以甲方通知为准');
INSERT INTO `cmc_project_work` VALUES (1306, '1648881412237688834', '太平镇巡护道路1:1000地形图测绘', '1:1000', 'm²', '175000', '2022-10-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1307, '1648881412346740737', '工程区1:5000地形图测绘（含水下地形）', '1:5000', 'km²', '13', '2022-08-31', NULL, '暂定工期，现场进展情况及时跟项目部沟通。（同时提供三维地形面）');
INSERT INTO `cmc_project_work` VALUES (1308, '1648881412237688834', '大川镇巡护步道1:1000地形图测绘', '1:1000', 'm²', '140000', '2022-10-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1309, '1648881412237688834', '白石河及大河坝生态厕所1:1000地形图测绘', '1:1000', 'm²', '18420', '2022-10-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1310, '1648881412237688834', 'E级GNSS测量', 'E级', '点', '9', '2022-10-15', NULL, '拟合高程');
INSERT INTO `cmc_project_work` VALUES (1311, '1648881412124442625', '水平位移基准点地面标土建', NULL, '点', '2', '2022-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1312, '1648881412124442625', '水平位移监测点土建', NULL, '点', '10', '2022-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1313, '1648881412124442625', '断面垂直位移监测点（包括裂缝监测点）土建', NULL, '点', '35', '2022-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1314, '1648881412124442625', '垂直位移基准点及校核点土建', NULL, '点', '4', '2022-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1315, '1648881412153802753', '工程区1:1000地形图测绘', '1:1000', 'km²', '30.23', '2022-10-31', NULL, '中间资料提交时间按10月15日控制');
INSERT INTO `cmc_project_work` VALUES (1316, '1648881412124442625', '三等GNSS测量', '三等', '点', '4', '2022-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1317, '1648881412124442625', '二等水准连测', '二等', 'km', '11', '2022-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1318, '1648881412124442625', '二等水平位移监测', '二等', '点次', '10', '2022-10-31', NULL, '监测周期10天预计，前3天每天早晚监测1次，3天后按每天1次监测');
INSERT INTO `cmc_project_work` VALUES (1319, '1648881412124442625', '二等垂直位移监测', '二等', '点次', '35', '2022-10-31', NULL, '监测周期10天预计，前3天每天早晚监测1次，3天后按每天1次监测');
INSERT INTO `cmc_project_work` VALUES (1320, '1648881412124442625', '裂缝监测', NULL, '点次', '15', '2022-10-31', NULL, '监测周期10天预计，前3天每天早晚监测1次，3天后按每天1次监测');
INSERT INTO `cmc_project_work` VALUES (1321, '1648881412124442625', '资料整编', NULL, '项', '1', '2022-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1322, '1648881412002807809', '四等GNSS测量', '四等', '点', '8', '2022-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1323, '1648881412002807809', '坝址区1:1000地形图缩编为1:2000', '1:2000', 'km²', '3.3', '2022-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1324, '1648881412002807809', '坝址区1:1000三维地形面制作', '1:1000', 'km²', '3.3', '2022-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1325, '1648881412002807809', '库区、引水线路、厂房系统1:2000三维地形面制作', '1:2000', 'km²', '18', '2022-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1326, '1648881411986030594', '海南地形变化较大区域激光数据采集', '1:2000', 'km²', '475', '2022-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1327, '1648881411986030594', '数据漏洞区域激光数据采集', '1:2000', 'km²', '63', '2022-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1328, '1648881411906338818', '五等GNSS测量', '五等', '点', '3', '2022-11-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1329, '1648881411906338818', '1:1000地形图测绘', '1:1000', 'km²', '0.5', '2022-11-25', NULL, '视现场情况，再定是否实施。');
INSERT INTO `cmc_project_work` VALUES (1330, '1648881412715839489', '1:2000地形图测绘', '1:2000', 'km²', '0.57', '2022-06-28', NULL, '同时提供正射影像');
INSERT INTO `cmc_project_work` VALUES (1331, '1648881412715839489', '1:500地形图测绘', '1:500', 'km²', '0.025', '2022-06-28', NULL, '同时提供正射影像');
INSERT INTO `cmc_project_work` VALUES (1332, '1648881412715839489', '五等控制点', '五等', '点', '4', '2022-06-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1333, '1648881412665507842', '断面基点测量', '五等', '点', '32', '2022-07-19', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1334, '1648881412665507842', '松林河、南桠河1:500大断面测量', '1:500', '条', '32', '2022-07-19', NULL, '2条河，预计测32条断面');
INSERT INTO `cmc_project_work` VALUES (1335, '1648881412459986946', '二等地面三角形网平面观测墩标土建', '二等', '点', '9', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1336, '1648881412459986946', '三等GNSS平面观测地面砼标土建', '三等', '点', '12', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1337, '1648881412552261633', '1:500地形图测绘', '1:500', 'km²', '29.5', '2022-07-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1338, '1648881412459986946', '二等基本水准点土建', '二等', '点', '3', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1339, '1648881412665507842', '老鹰岩水电站支流1:1000水下地形图测绘', '1:1000', 'km²', '0.4', '2022-07-19', NULL, '四处');
INSERT INTO `cmc_project_work` VALUES (1340, '1648881412459986946', '二等普通水准点土建', '二等', '点', '9', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1341, '1648881412459986946', '便道修筑', NULL, 'km', '6', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1342, '1648881412459986946', '三等GNSS平面控制网引测', '三等', '点', '6', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1343, '1648881412459986946', '二等GNSS平面连接网', '二等', '点', '4', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1344, '1648881412459986946', '二等地面三角形网观测', '二等', '点', '9', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1345, '1648881412459986946', '三等GNSS点观测', '三等', '点', '12', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1346, '1648881412459986946', '二等边观测', '二等', '条', '17', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1347, '1648881412459986946', '三等边观测', '三等', '条', '13', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1348, '1648881412459986946', '二等水准引测', '二等', 'km', '4', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1349, '1648881412459986946', '三等三角高程观测', '三等', 'km', '28', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1350, '1648881412459986946', '二等水准观测', '二等', 'km', '42', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1351, '1648881412459986946', '资料整编', NULL, '项', '1', '2022-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1352, '1648881412514512898', '1:1000地形地类图测绘', '1:1000', 'km²', '23.78', '2022-08-15', NULL, '地形图资用成果提交时间按7月底控制。');
INSERT INTO `cmc_project_work` VALUES (1353, '1648881412514512898', '1:1000三维地形面', '1:1000', 'km²', '23.78', '2022-08-18', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1354, '1648881412514512898', 'GNSS点测量', '四等', '点', '14', '2022-08-18', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1355, '1648881412514512898', '高程测量', '四等', 'km', '45', '2022-08-18', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1356, '1648881412514512898', '数字正射影像(DOM)制作', '1:1000', 'km²', '23.78', '2022-08-18', NULL, '2022.8.3龙宇杰通知增加工作内容');
INSERT INTO `cmc_project_work` VALUES (1357, '1648881412141219841', '五等GNSS测量', '五等', '点', '12', '2022-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1358, '1648881412107665410', '坝区二等边角网复测', '二等', '点', '21', '2022-12-30', NULL, '按合同约定开展一次复测工作，具体时间以甲方通知为准。');
INSERT INTO `cmc_project_work` VALUES (1359, '1648881412107665410', '上下游三等边角网复测', '三等', '点', '31', '2022-12-30', NULL, '上游足木足三等边角网10点，上游绰斯甲三等边角网10点，下游三等边角网11点');
INSERT INTO `cmc_project_work` VALUES (1360, '1648881412107665410', '三等三角高程复测', '三等', 'km', '96', '2022-12-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1361, '1648881412107665410', '二等水准复测', '二等', 'km', '2', '2022-12-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1362, '1648881411906338818', '勘探孔测量及放样', NULL, '点', '30', '2022-11-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1363, '1648881411906338818', '工程地质调绘', '1:1000', 'km²', '0.5', '2022-11-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1364, '1648881412141219841', '产卵场地地形地类图测绘（含水下地形）', '1:500', 'km²', '0.8', '2022-11-30', NULL, '3号产卵场先提交');
INSERT INTO `cmc_project_work` VALUES (1365, '1648881411906338818', '钻探', NULL, 'm', '450', '2022-11-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1366, '1648881411906338818', '取土、水', NULL, '件', '24', '2022-11-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1367, '1648881411906338818', '重型重力触探', NULL, 'm', '150', '2022-11-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1368, '1648881411906338818', '土工试验', NULL, '组', '120', '2022-11-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1369, '1648881411906338818', '土腐试验', NULL, '件', '6', '2022-11-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1370, '1648881411906338818', '水质简分析', NULL, '件', '6', '2022-11-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1371, '1648881411927310338', '1:1000地形图测绘（水下）', '1:1000', 'km²', '0.54', '2022-11-25', NULL, '力丘河口，工期为计划工期，请提前提交成果');
INSERT INTO `cmc_project_work` VALUES (1372, '1648881411927310338', '1:1000地形图测绘（水下）', '1:1000', 'km²', '0.24', '2022-11-25', NULL, '马蹄村，工期为计划工期，请提前提交成果');
INSERT INTO `cmc_project_work` VALUES (1373, '1648881411847618561', '1、2料场1:1000地形图测绘', '1:1000', 'km²', '0.6', '2022-12-09', NULL, '为预估工作量，需与用户再确认。');
INSERT INTO `cmc_project_work` VALUES (1374, '1648881411847618561', '沉沙池及取水口1:500地形图测绘', '1:500', '亩', '30', '2022-12-09', NULL, '为预估工作量，需与用户再确认。');
INSERT INTO `cmc_project_work` VALUES (1375, '1648881411847618561', '左岸引水线路1:1000带状地形图测绘', '1:1000', 'km²', '0.97', '2022-12-09', NULL, '为预估工作量，需与用户再确认。');
INSERT INTO `cmc_project_work` VALUES (1376, '1648881411847618561', '四等GNSS测量', '四等', '点', '8', '2022-12-09', NULL, '新建6点，引测2点');
INSERT INTO `cmc_project_work` VALUES (1377, '1648881411847618561', '四等三角高程', '四等', 'km', '20', '2022-12-09', NULL, '附合线路');
INSERT INTO `cmc_project_work` VALUES (1378, '1648881411885367297', '四等GNSS测量', '四等', '点', '12', '2022-12-26', NULL, '暂定；控制点数量、等级技术部门确定');
INSERT INTO `cmc_project_work` VALUES (1379, '1648881411885367297', '1:2000地形图测绘', '1:2000', 'km²', '12.6', '2022-12-26', NULL, '2块。请跟联系人沟通好测绘范围');
INSERT INTO `cmc_project_work` VALUES (1380, '1648881411885367297', '四等高程测量', '四等', 'km', '8', '2022-12-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1381, '1648881411667263489', '工程地质调绘', '1:2000', 'km²', '10.06', '2023-01-07', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1382, '1648881411667263489', '钻探', NULL, 'm', '385', '2023-01-07', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1383, '1648881411667263489', '土、岩样', NULL, '件', '30', '2023-01-07', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1384, '1648881411667263489', '电测深', NULL, '点', '12', '2023-01-07', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1385, '1648881411667263489', '室内试验', NULL, '件', '252', '2023-01-07', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1386, '1648881411667263489', '勘探点测量放样', NULL, '人.天', '3', '2023-01-07', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1387, '1648881411650486273', '羊湖电站压力钢管永久变形监测控制水准工作基点IBM02、IBM03出现沉降。2020年羊湖站安全性评价主要问题及整', NULL, '项', '1', '2023-01-20', NULL, '本项目的质量保修期为从项目通过竣工验收之日起开始起算至1年期满止。工作内容详见附件4：工程量清单');
INSERT INTO `cmc_project_work` VALUES (1388, '1648881413768609794', '绰斯甲水电站工程测量中心2022年度技术服务', NULL, '项', '1', '2022-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1389, '1648881412170579969', '专一等三角测量', '一等', '站', '26', '2023-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1390, '1648881412170579969', '专一等边长测量', '一等', '条', '96', '2023-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1391, '1648881412170579969', '倒垂线观测', NULL, '点次', '4', '2023-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1392, '1648881412170579969', '二等水准测量', '二等', 'km', '42', '2023-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1393, '1648881412313186305', '负责完成袁市镇、两河乡、关河乡、龙桥乡、九龙镇、黎家、风垭乡、御临镇、丰禾镇、长滩乡、凉山乡、复盛乡', NULL, '项', '1', '2022-12-31', NULL, '具体内容见合同第一条“工作内容”。');
INSERT INTO `cmc_project_work` VALUES (1394, '1648881412170579969', '变形监测网复测', NULL, NULL, NULL, '2023-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1395, '1648881412170579969', '一等水准测量', '一等', 'km', '34', '2023-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1396, '1648881412170579969', '数据处理及变形分析', NULL, '项', '2', '2023-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1397, '1648881412170579969', '坝前淤积及坝后冲刷测量', NULL, NULL, NULL, '2023-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1398, '1648881412170579969', '坝前1:1000地形图测绘', '1:1000', 'km²', '6.4', '2023-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1399, '1648881412170579969', '1:500横剖面测绘', '1:500', 'km', '19.2', '2023-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1400, '1648881412170579969', '坝前淤积分析', NULL, '项', '2', '2023-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1401, '1648881412170579969', '坝前淤积资料整编', NULL, '项', '2', '2023-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1402, '1648881412170579969', '坝后1:500地形图测绘', '1:500', 'km²', '1', '2023-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1403, '1648881412170579969', '坝后冲刷分析', NULL, '项', '2', '2023-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1404, '1648881412170579969', '坝后冲刷资料整编', NULL, '项', '2', '2023-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1405, '1648881412204134402', '工程区地形图测绘', '1:5000', 'km²', '6.96', '2022-10-14', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1406, '1648881412204134402', '枢纽区地形图测绘', '1:2000', 'km²', '20.54', '2022-10-14', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1407, '1648881412204134402', 'GNSS测量', '四等', '点', '10', '2022-10-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1408, '1648881412204134402', '高程测量', '四等', 'km', '45', '2022-10-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1409, '1648881412074110977', '矿区和生产加工区地形图测绘', '1:1000', 'km²', '6.28', '2022-11-12', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1410, '1648881412074110977', '控制点测量', '五等', '点', '8', '2022-11-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1411, '1648881411705012226', '2022年度新增耕地', NULL, NULL, NULL, '2023-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1412, '1648881411705012226', '2022年度变更调查', NULL, NULL, NULL, '2023-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1413, '1648881411688235010', '技术指导、外业调查举证', '1:5000', '个', '5866', '2023-02-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1414, '1648881411688235010', '内业审核，建库并汇总提交', '1:5000', '个', '5866', '2023-02-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1415, '1648881411633709057', '道路扫描', NULL, 'km', '2', '2022-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1416, '1648881411633709057', '3DsMax制作道路模型', NULL, 'km', '2', '2022-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1417, '1648881411587571714', '1:1000地形地类图测绘', '1:1000', 'km²', '2.96', '2023-01-13', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1418, '1648881411587571714', '1:1000水下地形图测绘', '1:1000', 'km²', '0.1', '2023-01-13', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1419, '1648881411705012226', '2022年度动态监测', NULL, NULL, NULL, '2023-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1420, '1648881411587571714', '1:2000地形地类图测绘', '1:2000', 'km²', '12.52', '2023-01-13', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1421, '1648881411587571714', '四等GNSS测量', '四等', '点', '6', '2023-01-13', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1422, '1648881411587571714', '四等高程测量', '四等', 'km', '20', '2023-01-13', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1423, '1648881411562405890', '1:2000地形地类图测绘', '1:2000', 'km²', '19.2', '2023-01-13', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1424, '1648881411562405890', '1:2000正射影像制作', '1:2000', 'km²', '19.2', '2023-01-13', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1425, '1648881411562405890', '1:2000三维地形面制作', '1:2000', 'km²', '19.2', '2023-01-13', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1426, '1648881411562405890', '五等GNSS测量', '五等', '点', '8', '2023-01-13', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1427, '1648881411499491329', '地质灾害隐患点防治工程', NULL, '个', '30', NULL, NULL, '经南充市高坪区自然资源和规划局核实选定后，需要工程治理的灾害点位个数为5个，需要排危处理的点位个数为2');
INSERT INTO `cmc_project_work` VALUES (1428, '1648881411499491329', '地形图测绘', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1429, '1648881411235250178', '建设征地实物指标调查配合测量', NULL, '项', '1', '2023-12-31', NULL, '5月底前完成到村调查，到户时间待定');
INSERT INTO `cmc_project_work` VALUES (1430, '1648881411201695745', '枢纽区三维地形面制作', '1:2000', 'km²', '20.1', '2023-02-20', NULL, '含水下地形');
INSERT INTO `cmc_project_work` VALUES (1431, '1648881411201695745', '平面控制测量', '五等', '点', '9', '2023-02-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1432, '1648881411348496386', '国能四川阿水电力开发有限公司绰斯甲水电站工程测量中心技术服务（2023年）', NULL, '项', '1', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1433, '1648881411788898305', '平泉街道新桥村储备土地2016-70号地块砂石资源量估算服务工作', NULL, '项', '1', NULL, NULL, '工程开工日期暂定为2022年12月9日，以甲方正式通知为准；工期必须满足建设单位工期要求。');
INSERT INTO `cmc_project_work` VALUES (1434, '1648881411419799553', '大渡河金川水电站工程测量中心劳务配合（2023年）', NULL, '项', '1', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1435, '1648881411331719170', '雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测（2023年）', NULL, '项', '1', '2023-12-31', NULL, '请按照合同要求开展监测工作');
INSERT INTO `cmc_project_work` VALUES (1436, '1648881411218472961', '平面控制测量', '五等', '点', '3', '2023-02-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1437, '1648881411218472961', '补水枢纽地形图测绘', '1:1000', 'km²', '0.32', '2023-02-15', NULL, '2023年2月6日新增');
INSERT INTO `cmc_project_work` VALUES (1438, '1648881411201695745', '枢纽区地形图测绘', '1:2000', 'km²', '20.1', '2023-02-20', NULL, '含水下地形');
INSERT INTO `cmc_project_work` VALUES (1439, '1648881411201695745', '高程控制测量', '四等', 'km', '8', '2023-02-20', NULL, '内部串联');
INSERT INTO `cmc_project_work` VALUES (1440, '1648881411218472961', '沁水抽蓄灰岩料场地形测绘', '1:1000', 'km²', '1.37', '2023-02-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1441, '1648881412736811010', '广西南宁上林抽水蓄能电站地形图测绘', '1:5000', 'km²', '11.72', '2022-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1442, '1648881414641025025', '直白至扎曲地形图', '1:2000', 'km²', '89', '2021-11-30', NULL, '见2021C38');
INSERT INTO `cmc_project_work` VALUES (1443, '1648881414641025025', '多雄河至背崩地形图', '1:2000', 'km²', '122.42', '2021-11-30', NULL, '见2021C38');
INSERT INTO `cmc_project_work` VALUES (1444, '1648881414641025025', '多雄河至背崩地形图', '1:2000', 'km²', '103.70', '2021-11-30', NULL, '见2021C38');
INSERT INTO `cmc_project_work` VALUES (1445, '1648881414641025025', '多雄河、背崩区域地形图补测', '1:2000', 'km²', '11.97', '2021-12-31', NULL, '外业1.15系数，2015年激光点云。');
INSERT INTO `cmc_project_work` VALUES (1446, '1648881414641025025', '多雄河、背崩区域地形图补测', '1:2000', 'km²', '29.18', '2021-12-31', NULL, '外业1.15系数，2015年激光点云。');
INSERT INTO `cmc_project_work` VALUES (1447, '1648881414641025025', '派镇区域地形图测绘', '1:2000', 'km²', '7.3', '2021-12-31', NULL, '外业1.15系数，2015年激光点云。');
INSERT INTO `cmc_project_work` VALUES (1448, '1648881414641025025', '派镇至多雄河地形图测绘', '1:2000', 'km²', '9.96', '2021-12-31', NULL, '外业1.15系数，2015年激光点云。');
INSERT INTO `cmc_project_work` VALUES (1449, '1648881414641025025', '多雄拉越岭段地形图补充测绘', '1:2000', 'km²', '3.2', '2021-12-31', NULL, '外业1.15系数，2015年激光点云。');
INSERT INTO `cmc_project_work` VALUES (1450, '1648881414641025025', 'JW库区地形地类图新测', '1:2000', 'km²', '210', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1451, '1648881414641025025', 'JW库区地形地类图调绘', '1:2000', 'km²', '413', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1452, '1648881414641025025', '玉松中闸址~下闸址段水下地形测量', '1:1000', 'km²', '1.5', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1453, '1648881414641025025', '吞白沟地形图测绘', '1:2000', 'km²', '60', '2021-12-31', NULL, '采购卫片');
INSERT INTO `cmc_project_work` VALUES (1454, '1648881414641025025', '麦朗沟地形图测绘', '1:2000', 'km²', '11.5', '2021-12-31', NULL, '采购卫片');
INSERT INTO `cmc_project_work` VALUES (1455, '1648881414641025025', '麦朗沟地形图补充测绘', '1:2000', 'km²', '56.3', '2021-12-31', NULL, '采购卫片');
INSERT INTO `cmc_project_work` VALUES (1456, '1648881414641025025', '羌纳乡地形图补充测绘', '1:2000', 'km²', '95.58', '2021-12-31', NULL, '采购卫片');
INSERT INTO `cmc_project_work` VALUES (1457, '1648881414641025025', '派镇工区麦朗沟、吞白沟、蹦嘎沟地形图测量', '1:1000', 'km²', '16.03', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1458, '1648881414641025025', '截弯地形图新测', '1:5000', 'km²', '308.00', '2021-12-31', NULL, '卫片');
INSERT INTO `cmc_project_work` VALUES (1459, '1648881414641025025', '截弯地形图放大', '1:5000', 'km²', '265.00', '2021-12-31', NULL, '1:2000缩编');
INSERT INTO `cmc_project_work` VALUES (1460, '1648881414641025025', '多雄河流域正射影像制作（叠加地形图）', '1:5000', 'km²', '573.00', '2021-12-31', NULL, '卫片');
INSERT INTO `cmc_project_work` VALUES (1461, '1648881414641025025', 'JW提及闸址、厂址等枢纽区三维地形面', '1:2000', 'km²', '58', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1462, '1648881414641025025', 'JW梯级引水线路区三维地形面', '1:5000', 'km²', '371.40', '2021-12-31', NULL, '激光技术部承担');
INSERT INTO `cmc_project_work` VALUES (1463, '1648881414641025025', 'JW梯级基于航拍影像的电子沙盘1:5000', '1:5000', 'km²', '645', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1464, '1648881414641025025', 'JW梯级植被清除后的点云数据', NULL, 'km²', '300', '2021-12-31', NULL, '不计');
INSERT INTO `cmc_project_work` VALUES (1465, '1648881414641025025', '截弯电站整体已有的(DEM和DOM)', '1:5000', 'km²', '645', '2021-12-31', NULL, '激光技术部承担');
INSERT INTO `cmc_project_work` VALUES (1466, '1648881414641025025', '基于DEM模型输出可在3DE中还原的网格面模型的成果', NULL, 'km²', '645', '2021-12-31', NULL, '不计');
INSERT INTO `cmc_project_work` VALUES (1467, '1648881414641025025', '多雄河生态修复示范园1:500地形图测绘', '1:500', 'km²', '0.03', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1468, '1648881414641025025', '多雄拉越岭隧道进、出口1:500地形图', '1:500', 'km²', '3.37', '2021-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1469, '1648881414641025025', '坐标转换（转成2000国家大地坐标）', NULL, '点', '469.00', '2021-12-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1470, '1648881412090888194', '坝体、坝基的渗流分析。', NULL, '项', '1', '2022-12-30', NULL, '2022年11月15日至 2022 年12月30日');
INSERT INTO `cmc_project_work` VALUES (1471, '1648881412090888194', '坝基渗压分析。', NULL, '项', '1', '2022-12-30', NULL, '2022年11月15日至 2022 年12月30日');
INSERT INTO `cmc_project_work` VALUES (1472, '1648881412090888194', '面板应力、应变分析。', NULL, '项', '1', '2022-12-30', NULL, '2022年11月15日至 2022 年12月30日');
INSERT INTO `cmc_project_work` VALUES (1473, '1648881412090888194', '混凝土面板周边缝和垂直缝变形。', NULL, '项', '1', '2022-12-30', NULL, '2022年11月15日至 2022 年12月30日');
INSERT INTO `cmc_project_work` VALUES (1474, '1648881412594204674', '攀枝花三峡光伏发电项目地形图测绘', '1:500', 'km²', '16.16', '2022-07-31', NULL, '10月新增工作，内业由德方承担。');
INSERT INTO `cmc_project_work` VALUES (1475, '1648881412594204674', '控制点测量', '五等', '点', '12', '2022-07-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1476, '1648881412594204674', '高程测量', '四等', 'km', '20', '2022-07-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1477, '1648881412090888194', '坝体沉降及位移分析。', NULL, '项', '1', '2022-12-30', NULL, '2022年11月15日至 2022 年12月30日');
INSERT INTO `cmc_project_work` VALUES (1478, '1648881412057333761', '蓬安县林权类不动产登记数据整合工作（存量林权登记数据清理、补充图形、落宗、整合建库、入库和存量林权登', NULL, '项', '1', '2022-12-31', NULL, '2022 年11月15日前完成林权登记数据整合建库入库并汇交，2022年12月31日前完成全部工作任务并验收，若部、');
INSERT INTO `cmc_project_work` VALUES (1479, '1648881411809869825', '1:5000地形图测绘', '1:5000', 'km²', '52', '2022-12-21', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1480, '1648881411809869825', '1:2000地形图测绘', '1:2000', '项', '1', '2022-12-21', NULL, '现场确定范围');
INSERT INTO `cmc_project_work` VALUES (1481, '1648881411809869825', '图根控制点', '图根', '点', '4', '2022-12-21', NULL, '根据现场实际情况技术部门确定数量等级');
INSERT INTO `cmc_project_work` VALUES (1482, '1648881411159752705', '尼呷4#供水站取水工程场地地形图测绘', '1:500', 'km²', '0.3', '2023-02-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1483, '1648881411159752705', '八窝龙平面控制GNSS测量', '五等', '点', '5', '2023-02-17', NULL, '新设3点');
INSERT INTO `cmc_project_work` VALUES (1484, '1648881411159752705', '八窝龙高程控制测量', '四等', 'km', '2', '2023-02-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1485, '1648881411612737537', '砾岩料场1:2000地形图测绘', '1:2000', 'km²', '1.1', '2023-01-05', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1486, '1648881411159752705', '尼呷平面控制GNSS测量', '五等', '点', '5', '2023-02-17', NULL, '新设3点');
INSERT INTO `cmc_project_work` VALUES (1487, '1648881411159752705', '尼呷高程控制测量', '五等', 'km', '3', '2023-02-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1488, '1648881411159752705', '八窝龙5#供水站取水工程场地地形图测绘', '1:500', 'km²', '0.4', '2023-02-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1489, '1648881411017146369', '青江补水泵上游河段断面测量（10条）', '1:1000', 'km', '4.5', '2023-03-17', NULL, '岸上部分测至常年洪水位以上20m，河道较窄或者高程变化大的地方，加密垂线，岸上、水下部分测点要求密集，');
INSERT INTO `cmc_project_work` VALUES (1490, '1648881411017146369', '青江补水泵下游河段断面测量（32）', '1:1000', 'km', '47', '2023-03-17', NULL, '岸上部分测至常年洪水位以上50m，河道较窄或者高程变化大的地方，加密垂线，能控制断面的转折变化，并施测');
INSERT INTO `cmc_project_work` VALUES (1491, '1648881414410338305', '五等控制点', NULL, '点', '6', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1492, '1648881414410338305', '地形图测绘', '1:2000', 'km²', '21.29', '2021-11-20', NULL, '2022.7.5变更为地形地类图，测绘工程中心负责权属调查，航测遥感中心一组负责编制地形地类图。');
INSERT INTO `cmc_project_work` VALUES (1493, '1648881414410338305', '地形图缩编（1：2000至1：5000）', '1:5000', 'km²', '21.29', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1494, '1648881414410338305', '地形图测绘', '1:5000', 'km²', '30.26', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1495, '1648881414410338305', '三维地形面', '1:2000', 'km²', '21.29', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1496, '1648881414410338305', '三维地形面', '1:5000', 'km²', '51.55', '2021-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1497, '1648881412573233153', '地形图测绘', '1:2000', 'km²', '12', '2022-07-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1498, '1648881412573233153', '地形图测绘', '1:500', 'km²', '1.18', '2022-07-31', NULL, '2块');
INSERT INTO `cmc_project_work` VALUES (1499, '1648881412329963522', '(一)外业确权的主要工程内容:①负责外业调绘业务培训，摸底调查及基础信息录入;②按农业部规范要求印制前期', NULL, '项', '1', '2022-12-31', NULL, '包1为:袁市镇、关河乡、龙桥乡、九龙镇、黎家乡、风垭乡、御临镇、丰禾镇、长滩乡、凉山乡、复盛乡，共11个');
INSERT INTO `cmc_project_work` VALUES (1500, '1648881412329963522', '( 二）内业建库的主要工程内容:负责两次公示审核校正的公示工作，负责打印全部公示资料;②负责乡镇数据库建', NULL, '项', '1', '2022-12-31', NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (1501, '1648881412220911618', '铜厂河瞭望塔及管护站1:500地形图测绘', '1:500', 'm²', '35680', '2022-10-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1502, '1648881412220911618', '长石坝管理用房及哨卡和现状建筑测量站1:500地形图测绘', '1:500', 'm²', '37182', '2022-10-15', NULL, '那栋白色楼房需要加测立面图，立面图精度请现场与城乡分公司人员协商');
INSERT INTO `cmc_project_work` VALUES (1503, '1648881412220911618', '草米岗瞭望塔1:500地形图测绘', '1:500', 'm²', '12540', '2022-10-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1504, '1648881412220911618', '驼峰驿站瞭望塔1:500地形图测绘', '1:500', 'm²', NULL, '2022-10-15', NULL, '工作量现场确定，及时告知项目管理部或我部');
INSERT INTO `cmc_project_work` VALUES (1505, '1648881412220911618', '鹿厂河瞭望塔1:500地形图测绘', '1:500', 'm²', NULL, '2022-10-15', NULL, '工作量现场确定，及时告知项目管理部或我部');
INSERT INTO `cmc_project_work` VALUES (1506, '1648881412220911618', '皂角湾瞭望塔1:500地形图测绘', '1:500', 'm²', NULL, '2022-10-15', NULL, '工作量现场确定，及时告知项目管理部或我部');
INSERT INTO `cmc_project_work` VALUES (1507, '1648881412220911618', 'E级GNSS测量', 'E级', '点', '12', '2022-10-15', NULL, '拟合高程');
INSERT INTO `cmc_project_work` VALUES (1508, '1648881411965059074', '雨水公园1:500地形图测绘', '1:500', 'km²', '0.1', '2022-11-21', NULL, '完成时间与用户协商');
INSERT INTO `cmc_project_work` VALUES (1509, '1648881411965059074', '罗纯山公园1:500地形图测绘', '1:500', 'km²', '0.29', '2022-11-21', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1510, '1648881411965059074', '五等GNSS测量', '五等', '点', '8', '2022-11-21', NULL, '每处4个。根据技术部要求适当布置控制点');
INSERT INTO `cmc_project_work` VALUES (1511, '1648881411965059074', '四等高程测量', '四等', 'km', '7.5', '2022-11-21', NULL, '根据技术部要求适当布置控制点');
INSERT INTO `cmc_project_work` VALUES (1512, '1648881411499491359', '高程测量', '四等', 'km', '42', NULL, NULL, '岗托坝下至岩比乡尼朱村单边42km，附合沿河国家水准点');
INSERT INTO `cmc_project_work` VALUES (1513, '1648881411499491359', '坐标转换联测', '五等', '点', '10', NULL, NULL, '与规划阶段控制点联测，用于前期地形图转换');
INSERT INTO `cmc_project_work` VALUES (1514, '1648881411499491356', '界桩布置设计', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1515, '1648881411499491356', '征地界桩配合工作', NULL, '人.天', '30', NULL, NULL, '预计');
INSERT INTO `cmc_project_work` VALUES (1516, '1648881411499491356', '永久界桩搬运、开挖、安装、埋设', NULL, NULL, NULL, NULL, NULL, '根据现场情况及用户沟通情况，确定工作量。');
INSERT INTO `cmc_project_work` VALUES (1517, '1648881411499491356', '加密界桩搬运、开挖、安装、埋设', NULL, NULL, NULL, NULL, NULL, '根据现场情况及用户沟通情况，确定工作量。');
INSERT INTO `cmc_project_work` VALUES (1518, '1648881411499491356', '临时界桩搬运、开挖、安装、埋设', NULL, NULL, NULL, NULL, NULL, '根据现场情况及用户沟通情况，确定工作量。');
INSERT INTO `cmc_project_work` VALUES (1519, '1648881411499491356', '水位牌搬运、开挖、安装、埋设', NULL, NULL, NULL, NULL, NULL, '根据现场情况及用户沟通情况，确定工作量。');
INSERT INTO `cmc_project_work` VALUES (1520, '1648881411499491356', '永久界桩、加密界桩、临时界桩及水位牌放线与测量', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1521, '1648881411499491356', '界桩点展绘、绘制红线图等', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1522, '1648881411499491335', '墨脱一级1#施工支洞口地形图测绘', '1:1000', 'km²', '0.346', '2023-12-31', NULL, '该项目与2023C83合并，各项完成时间为预估工期，具体提交时间可根据现场实际情况与用户专业沟通。');
INSERT INTO `cmc_project_work` VALUES (1523, '1648881411499491335', '墨脱一级1#通风洞口地形图测绘', '1:1000', 'km²', '0.214', '2023-12-31', NULL, '鉴于本项目绝大部分区域不具备开展外业实测条件、调绘工作较少。内部结算时按实际外业测量情况合理核减外业');
INSERT INTO `cmc_project_work` VALUES (1524, '1648881411499491335', '墨脱一级6#施工支洞口地形图测绘', '1:1000', 'km²', '0.881', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1525, '1648881411499491335', '根阿日沟附近地形图测绘', '1:1000', 'km²', '22.15', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1526, '1648881411499491335', '墨脱三级尾水出口地形图测绘', '1:1000', 'km²', '0.365', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1527, '1648881411499491335', '格林渣场地形图测绘', '1:1000', 'km²', '13.55', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1528, '1648881411499491335', '首部枢纽区地形图测绘', '1:1000', 'km²', '36.4', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1529, '1648881411499491335', '墨脱一级厂址地形图测绘', '1:1000', 'km²', '12.3', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1530, '1648881411499491335', '墨脱一级厂址地形图测绘', '1:500', 'km²', '2.97', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1531, '1648881411499491335', '墨脱二级厂房及三级调节池地形图测绘', '1:1000', 'km²', '21.1', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1532, '1648881411499491335', '墨脱三级厂址区地形图测绘', '1:1000', 'km²', '16.9', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1533, '1648881411499491385', '水面线测量', '1:1000', 'km', '200', NULL, NULL, '两河口电站下泄249、497、746、995、1243、1492、2095、3700、4240、4730m3/s左右流量时，10根代表性水面线');
INSERT INTO `cmc_project_work` VALUES (1534, '1648881411499491385', '流量测验', NULL, '个', '10', NULL, NULL, '流量和水面线必须在一日内同时施测');
INSERT INTO `cmc_project_work` VALUES (1535, '1648881410610298882', '钻探', NULL, 'm', '210', '2023-04-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1536, '1648881410610298882', '坑槽探', NULL, 'm3', '100', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1537, '1648881410610298882', '原位测试（压水试验）', NULL, '段', '37', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1538, '1648881410610298882', '土、岩样', NULL, '件', '22', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1539, '1648881410610298882', '原位测试（重型动力触探）', NULL, 'm', '15', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1540, '1648881410610298882', '钻孔声波测试', NULL, 'm', '190', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1541, '1648881410610298882', '钻孔孔内电视', NULL, 'm', '190', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1542, '1648881410610298882', '室内试验', NULL, '组/件', '17', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1543, '1648881410610298882', '钻孔声波测试', NULL, 'm', '190', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1544, '1648881410610298882', '钻孔孔内电视', NULL, 'm', '190', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1545, '1648881410610298882', '室内试验', NULL, '组/件', '17', '2023-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1546, '1648881410631270401', 'GNSS测量', '五等', '点', '8', '2023-04-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1547, '1648881410631270401', '高程测量', '四等', 'km', '20', '2023-04-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1548, '1648881410631270401', '勘探点测放', NULL, '点', '3', '2023-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1549, '1648881410631270401', '地形测量', '1:2000', 'km²', '6.7', '2023-04-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1550, '1648881410572550145', '鱼道工程渣场地形图测绘', '1:1000', 'km²', '0.02', '2023-04-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1551, '1648881410572550145', '平面控制测量', '五等', '点', '6', '2023-04-20', NULL, '新建3点，联测3点');
INSERT INTO `cmc_project_work` VALUES (1552, '1648881410572550145', '高程控制测量', NULL, NULL, NULL, NULL, NULL, '新建点内部串联');
INSERT INTO `cmc_project_work` VALUES (1553, '1648881411499491375', '1:1000地形图缩编', '1:2000', 'km²', '9.0', '2023-08-15', NULL, '枢纽区现有地形图缩编。');
INSERT INTO `cmc_project_work` VALUES (1554, '1648881411499491385', '断面测量', '1:1000', '条', '32', NULL, NULL, '两河口坝址至牙根一级坝址间20km范围');
INSERT INTO `cmc_project_work` VALUES (1555, '1648881411499491375', '地形图拼接', '1:5000', 'km²', '9.0', '2023-08-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1556, '1648881411499491386', '地形图测绘', '1:500', 'km²', '21.175', NULL, NULL, '预估工作量。八一镇47个行政村，预计21.175km²，平均0.4505km²/村庄，余下15个村庄可能以后不会做了，同时');
INSERT INTO `cmc_project_work` VALUES (1557, '1648881411499491386', '五等GNSS测量', '五等', '点', NULL, NULL, NULL, '根据现场情况布设。');
INSERT INTO `cmc_project_work` VALUES (1558, '1648881411499491386', '高程控制测量', '四等', 'km', NULL, NULL, NULL, '根据现场情况内部串联。');
INSERT INTO `cmc_project_work` VALUES (1559, '1648881411499491375', 'GNSS平面控制测量', '四等', '点', '8', '2023-08-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1560, '1648881411499491375', '高程控制测量', '四等', 'km', '32.0', '2023-08-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1561, '1648881410631270409', 'CP0复测', 'B级', '点', '20', '2023-09-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1562, '1648881410631270409', 'CPI复测', 'C级', '点', '300', '2023-09-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1563, '1648881410631270409', 'CPⅡ复测', 'D级', '点', '1150', '2023-09-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1564, '1648881410631270409', 'CP0、CPI和CPⅡ点位恢复', NULL, '点', '20', '2023-09-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1565, '1648881410631270409', '水准测量', '二等', 'km', '1800', '2023-09-01', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1566, '1648881411499491352', '1:2000地形地类图测绘', '1:2000', 'km²', '8.56', NULL, NULL, '提供两套坐标成果，2000坐标和雅砻江工程坐标系。昂姜、洛俄昔、米龙集镇斗地新址、米龙新址、唐岗河、八衣');
INSERT INTO `cmc_project_work` VALUES (1567, '1648881411499491368', '大岗山扩机电站施工场地规划图（施工阶段）坐标转换（转换2次，外业需采点6点）', NULL, '点', '37*2+6', '2023-07-28', NULL, '转成2000坐标，同时生成SHP格式文件，CAD2007版本。下同');
INSERT INTO `cmc_project_work` VALUES (1568, '1648881410631270411', '实景三维模型制作', '1:1000', 'km²', '8', '2023-08-14', NULL, '测区范围调整。');
INSERT INTO `cmc_project_work` VALUES (1569, '1648881411499491368', '猴子岩扩机电站施工场地规划图（施工阶段）坐标转换（外业采点4点）', NULL, '点', '33+4', '2023-07-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1570, '1648881411499491368', '长河坝扩机电站施工场地规划图（施工阶段）坐标转换（外业采点6点）', NULL, '点', '41+6', '2023-07-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1571, '1648881411499491368', '瀑布沟施工规划布置图（扩机规划）坐标转换（外业采点4点）', NULL, '点', '33+4', '2023-07-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1572, '1648881411499491368', '龚嘴扩机施工布置坐标转换（外业采点4点）', NULL, '点', '57+4', '2023-07-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1573, '1648881411499491368', '黄金坪水电站施工规划布置图（扩机规划）坐标转换（外业采点4点）', NULL, '点', '33+4', '2023-07-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1574, '1648881411499491368', '金川预可地形图（扩机利用）坐标转换（外业采点4点）', NULL, '点', '61+4', '2023-07-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1575, '1648881411499491368', '泸定水电站施工用地范围图（生态电站扩机利用）坐标转换（外业采点4点）', NULL, '点', '33+4', '2023-07-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1576, '1648881411499491368', '深溪沟预可施工征地范围图（扩机规划）坐标转换（外业采点6点）', NULL, '点', '29+6', '2023-07-28', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1577, '1648881411499491375', '排涝区域地形图测绘', '1:5000', 'km²', '65.29', '2023-08-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1578, '1648881411499491352', '坐标转换', NULL, '点', '1200', NULL, NULL, '已完成');
INSERT INTO `cmc_project_work` VALUES (1579, '1648881411499491353', '集镇新址国省干道占地范围公路配合测量', NULL, '人.天', NULL, NULL, NULL, '测区长度41km；打木桩系红绳，无法放点位置可以设置电子桩；完善配合工作量签认单。');
INSERT INTO `cmc_project_work` VALUES (1580, '1648881411499491341', '地形图测绘', '1:1000', 'km²', '13.1', '2023-11-23', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1581, '1648881411499491341', '地形图补测', '1:5000', 'km²', '0.11', '2023-11-23', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1582, '1648881411499491341', 'GNSS平面控制测量', '四等', '点', '9', '2023-11-23', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1583, '1648881411499491341', '高程控制测量', '四等', 'km', '30', '2023-11-23', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1584, '1648881410631270419', '全县 4 个乡（镇）的耕地、园地、林地、草地等 农用地和部分未利用土地。林地、草地中突出与食物生产相关的', NULL, NULL, NULL, NULL, NULL, '2023年，构建土壤三普组织体系，组建工作队伍，制定整体工作推进计划，落实普查工作经费，完成我县耕地、园');
INSERT INTO `cmc_project_work` VALUES (1585, '1648881410631270419', '1.土壤性状普查。', NULL, '项', '1', '2023-12-31', NULL, '通过土壤样品采集和测试，普查土壤颜色、质地、有机质、酸碱度、养分情况、容重、孔隙度、重金属、微量元素');
INSERT INTO `cmc_project_work` VALUES (1586, '1648881410631270419', '2.土壤类型普查。', NULL, '项', '1', '2023-12-31', NULL, '以土壤二普形成的分类成果为基础，通过实地踏勘、剖面观察等方式核实与补充完善土壤类型。同时，通过土壤剖');
INSERT INTO `cmc_project_work` VALUES (1587, '1648881410593521666', '雅砻江右岸洛俄昔集镇地形地类图测绘', '1:2000', 'km²', '0.15', '2023-04-21', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1588, '1648881411499491379', '上水库区域地形图测绘', '1:2000', 'km²', '4.90', '2023-06-30', NULL, '需形成三维地形图');
INSERT INTO `cmc_project_work` VALUES (1589, '1648881411499491379', '下水库1区域地形图测绘', '1:2000', 'km²', '1.60', '2023-06-30', NULL, '需形成三维地形图');
INSERT INTO `cmc_project_work` VALUES (1590, '1648881411499491379', '下水库2区域地形图测绘', '1:2000', 'km²', '2.9', '2023-06-30', NULL, '需形成三维地形图');
INSERT INTO `cmc_project_work` VALUES (1591, '1648881411499491379', 'GNSS平面控制测量', '五等', '点', '6', '2023-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1592, '1648881411499491379', '枢纽区地形图测绘', '1:5000', 'km²', '41.6', '2023-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1593, '1648881411499491379', '高程控制测量', '四等', 'km', '7', '2023-06-30', NULL, '三角高程');
INSERT INTO `cmc_project_work` VALUES (1594, '1648881411499491379', '2000缩小为5000地形图', '1:5000', 'km²', '9.4', '2023-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1595, '1648881411499491367', '地形图测绘', '1:1000', 'km²', '0.2', '2023-08-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1596, '1648881411499491367', '五等GNSS测量', '五等', '点', '6', '2023-08-11', NULL, '联测3点，新建3点');
INSERT INTO `cmc_project_work` VALUES (1597, '1648881411499491367', '四等三角高程测量', '四等', 'km', '6', '2023-08-11', NULL, '联测3km，新测3km');
INSERT INTO `cmc_project_work` VALUES (1598, '1648881410631270412', '边坡监测、深基坑水平位移监测、深基坑竖向位移监测、周边位移（水平净空收敛）监测、地表下沉监测、墙（坡', NULL, '项', '1', NULL, NULL, '服务期限：按甲方提供的方案执行。监测期限和频率按甲方提供的方案执行。');
INSERT INTO `cmc_project_work` VALUES (1599, '1648881419162484738', '白格堰塞体及上下游河段水下地形（含水边线）测量', '1:1000', 'km²', '0.4', '2019-12-10', NULL, '视现场情况确定能否实施。如无条件（保证安全），拍照反馈。');
INSERT INTO `cmc_project_work` VALUES (1600, '1648881419162484738', '堰塞体左岸清理后现状地形测量', '1:1000', 'km²', '0.1', '2019-12-10', NULL, '详见任务书。');
INSERT INTO `cmc_project_work` VALUES (1601, '1648881419162484738', '波罗坝区高程测量', '图根', '点', '1', '2019-12-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1602, '1648881419162484738', '波罗坝区平硐（PDK03、PDK05）洞口底板高程测量', '图根', '点', '2', '2019-12-10', NULL, '平硐洞口坐标详见测绘任务书。');
INSERT INTO `cmc_project_work` VALUES (1603, '1648881419162484738', '堰塞湖洪痕点测量', '图根', '点', '3', '2019-12-10', NULL, '确保安全前提下施测。');
INSERT INTO `cmc_project_work` VALUES (1604, '1648881418776608769', 'GNSS测量', '五等', '点', '4', '2020-03-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1605, '1648881418776608769', '河口变形边坡地形图测绘', '1:2000', 'km²', '2', '2020-03-18', NULL, '准确范围现场确定');
INSERT INTO `cmc_project_work` VALUES (1606, '1648881418642391041', '地形图测绘', '1:500', '亩', '550', '2020-05-02', NULL, '1、2、3号景区规划用地');
INSERT INTO `cmc_project_work` VALUES (1607, '1648881418642391041', '控制点测量', '五等', '点', '6', '2020-04-02', NULL, '每处2点，埋石，稳固、利于保存');
INSERT INTO `cmc_project_work` VALUES (1608, '1648881411499491351', '厂房部位及下库进/出水口地形图测绘（包含水下地形）', '1:1000', 'km²', '2.5', '2023-10-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1609, '1648881411499491351', '厂房部位及下库进/出水口正射影像图', '1:1000', 'km²', '2.5', '2023-10-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1610, '1648881410631270414', '地形图测绘', '1:5000', 'km²', '0.6', '2023-09-30', NULL, '甲方只需要提供地形图即可。');
INSERT INTO `cmc_project_work` VALUES (1611, '1648881411499491350', '地形图测绘', '1:2000', 'km²', '4', '2023-10-13', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1612, '1648881411499491350', '地形图测绘', '1:5000', 'km²', '18', '2023-10-07', NULL, '飞行范围外扩500米。');
INSERT INTO `cmc_project_work` VALUES (1613, '1648881411499491350', 'GNSS控制测量', '四等', '点', '4', '2023-10-13', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1614, '1648881411499491350', '高程控制测量', '四等', 'km', '28', '2023-10-13', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1615, '1648881411499491348', '地形图测绘', '1:1000', 'km²', '34', '2023-10-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1616, '1648881411499491348', 'GNSS控制测量', '四等', '点', '8', '2023-10-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1617, '1648881411499491348', '高程控制测量', '四等', 'km', '40', '2023-10-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1618, '1648881410631270416', '地形图测绘', '1:500', '项', '1', '2023-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1619, '1648881410631270416', '勘察', NULL, '项', '1', '2023-11-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1620, '1648881411499491355', 'GNSS控制测量', '四等', '点', '9', '2023-09-15', NULL, 'CGCS2000坐标系；雅砻江坐标系。');
INSERT INTO `cmc_project_work` VALUES (1621, '1648881411499491355', '高程控制测量', '四等', 'km', '32', '2023-09-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1622, '1648881411499491349', '施工总布置及比选库址地形地类图测绘（含西形冲口水下地形）', '1:2000', 'km²', '25', '2023-10-31', NULL, '10月15日前提交中间成果');
INSERT INTO `cmc_project_work` VALUES (1623, '1648881411499491349', '枢纽区地形图测绘（含西形冲口水下地形）', '1:1000', 'km²', '13', '2023-10-31', NULL, '10月7日前提交中间成果');
INSERT INTO `cmc_project_work` VALUES (1624, '1648881411499491349', '枢纽区地形图缩编', '1:2000', 'km²', '13', '2023-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1625, '1648881411499491349', 'GNSS控制测量', '四等', '点', '8', '2023-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1626, '1648881411499491349', '高程控制测量', '四等', 'km', '32', '2023-10-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1627, '1648881411499491343', '宁巴村～S201连接道路地形图', '1:2000', 'km²', '0.5', '2023-11-15', NULL, '遇到纵坡大于8%的区域，转弯半径小于15m的地段，均需要重新展线改建，这些区域需要放宽测量');
INSERT INTO `cmc_project_work` VALUES (1628, '1648881411499491343', '白格村安置点～S201连接道路地形图', '1:2000', 'km²', '0.5', '2023-11-15', NULL, '遇到纵坡大于8%的区域，转弯半径小于15m的地段，均需要重新展线改建，这些区域需要放宽测量');
INSERT INTO `cmc_project_work` VALUES (1629, '1648881411499491343', 'S303（卫通村）～S210（东达桥）连接道路地形图', '1:2000', 'km²', '5', '2023-11-15', NULL, '以现状道路为准，两边各测100m宽。遇到纵坡大于8%的区域，转弯半径小于15m的地段，均需要重新展线改建，这');
INSERT INTO `cmc_project_work` VALUES (1630, '1648881411499491343', 'GNSS平面控制测量', '四等', '点', '10', '2023-11-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1631, '1648881411499491343', '高程控制测量', '四等', 'km', '50', '2023-11-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1632, '1648881411499491340', '平面控制成果复核', NULL, '项', '1', '2023-11-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1633, '1648881411499491340', '高程控制成果复核', NULL, '项', '1', '2023-11-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1634, '1648881411499491339', '洛俄昔新址后坡泥石流区域地形图测绘', '1:5000', 'km²', '0.21', NULL, NULL, '完成时间与用户协商，任务急，时间紧');
INSERT INTO `cmc_project_work` VALUES (1635, '1648881411499491339', '斗地新址后坡泥石流区域地形图测绘', '1:5000', 'km²', '0.438', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1636, '1648881410631270429', '居民点1:500岸上地形地类图测绘', '1:500', 'km²', '0.05', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1637, '1648881410631270429', '居民点1:500水下地形地类图测绘', '1:500', 'km²', '0.19', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1638, '1648881410631270429', '公墓1:1000地形地类图测绘', '1:1000', 'km²', '0.22', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1639, '1648881410631270429', '道路1:500地形地类图测绘', '1:500', 'km²', '0.74', NULL, NULL, '3处');
INSERT INTO `cmc_project_work` VALUES (1640, '1648881410631270429', '建设征地临时界桩测设', NULL, '项', '1', NULL, NULL, '包括界桩设计，木桩埋设，界桩测量，配合测量，征地红线图制作等。等通知进场');
INSERT INTO `cmc_project_work` VALUES (1641, '1648881410631270429', 'GNSS控制测量', '四等', '点', '5', NULL, NULL, '在集镇处增设2个控制点，联测3个已知点');
INSERT INTO `cmc_project_work` VALUES (1642, '1648881410631270429', '高程控制测量', '四等', 'km', '10', NULL, NULL, '往返共计10km');
INSERT INTO `cmc_project_work` VALUES (1643, '1648881410631270430', '射水河沿岸地物点高程测量', '五等', '点', '6', '2024-03-01', NULL, '每个地物点需包含其主体建筑物最低点和最高点的高程和坐标信息');
INSERT INTO `cmc_project_work` VALUES (1644, '1648881410631270429', '集镇居民小区1:500地形地类图测绘', '1:500', 'km²', '0.23', NULL, NULL, '本周内进场');
INSERT INTO `cmc_project_work` VALUES (1645, '1648881410631270430', '断面基点测量', '五等/四等', '点', '14', '2024-03-01', NULL, '经与业主沟通，断面条数为7条，故基点数为14个');
INSERT INTO `cmc_project_work` VALUES (1646, '1648881410631270430', '1:1万地形图购置', '1:10000', '幅', '23', '2024-03-01', NULL, '工作已完成，补登记该项工作');
INSERT INTO `cmc_project_work` VALUES (1647, '1648881410631270430', '射水河跨河桥梁高程测量', '五等', '点', '10', '2024-03-01', NULL, '每座桥需包含桥面和桥底梁的高程和坐标信息');
INSERT INTO `cmc_project_work` VALUES (1648, '1648881410631270430', '三角高程测量', '四等', 'km', '2', '2024-03-01', NULL, '用于每个断面两个基点间的高程传递。');
INSERT INTO `cmc_project_work` VALUES (1649, '1648881410631270430', '坐标转换', NULL, NULL, NULL, NULL, NULL, '根据实际需求转换');
INSERT INTO `cmc_project_work` VALUES (1650, '1648881410631270430', '射水河流域河道断面测量', '1:500', 'km', '1.6', '2024-03-01', NULL, '共7条断面，分布在射水河国家玫瑰公园~河口河段');
INSERT INTO `cmc_project_work` VALUES (1651, '1648881410631270434', '牙根一级库区1:2000地形图补测', '1:2000', 'km²', '0.085', '2024-04-10', NULL, '与原图拼接。只测现状老路和沿线地物');
INSERT INTO `cmc_project_work` VALUES (1652, '1648881410631270434', '牙根二级库区1:2000地形图补测', '1:2000', 'km²', '16.13', '2024-04-10', NULL, '与原图拼接。分批次提交，第一批3月31日，最终4月10日');
INSERT INTO `cmc_project_work` VALUES (1653, '1648881410631270444', '倾斜摄影（干流河段 ）', '1:1000', 'km', '35.5', '2024-05-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1654, '1648881410631270444', '视频拍摄（牙根二级库尾段、茨玛绒坝址段、多吉坝址段、楞古减水河段、色乌绒沟汇口段等11段）', NULL, 'km', '46', '2024-05-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1655, '1648881410631270462', '升压站、光伏区、送出线路塔基位勘察', NULL, '点', '130', '2024-05-22', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1656, '1648881410631270463', '河道1:2000断面测量', '1:2000', 'km', '24.4', '2024-05-31', NULL, '共122条断面，每条暂按200m计划。');
INSERT INTO `cmc_project_work` VALUES (1657, '1648881410631270463', '断面基点测量', '五等/四等', '点', '122', '2024-05-31', NULL, '单基点考虑');
INSERT INTO `cmc_project_work` VALUES (1658, '1648881410631270463', '流量测验', NULL, '个', '122', '2024-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1659, '1648881410631270450', 'ML、JW临时桩测设工作', NULL, '点', '2395', NULL, NULL, '端午节后进场。打木桩，预计ML枢纽区1296个,JW打木桩，枢纽区1099个');
INSERT INTO `cmc_project_work` VALUES (1660, '1648881410631270450', 'ML、JW永久界桩测设工作', NULL, NULL, NULL, NULL, NULL, '待定');
INSERT INTO `cmc_project_work` VALUES (1661, '1648881410631270450', 'ML、JW加密界桩测设工作', NULL, NULL, NULL, NULL, NULL, '待定');
INSERT INTO `cmc_project_work` VALUES (1662, '1648881410631270450', 'ML、JW水位标识牌测设工作', NULL, NULL, NULL, NULL, NULL, '待定');
INSERT INTO `cmc_project_work` VALUES (1663, '1648881410631270450', '界桩点展绘、绘制红线图等', NULL, NULL, NULL, NULL, NULL, '待定');
INSERT INTO `cmc_project_work` VALUES (1664, '1648881410631270427', '白石河瞭望塔及巡护步道地形图测绘', '1:500', 'km²', '0.066', NULL, NULL, '见奥维范围。2000大地坐标，85国家高程基准。完成时间与用户协商。');
INSERT INTO `cmc_project_work` VALUES (1665, '1648881410631270427', '银厂河管护站消防水池地形图测绘', '1:500', 'km²', NULL, NULL, NULL, '现场指定范围，由施工单位刘经理：18981273366现场确定范围。');
INSERT INTO `cmc_project_work` VALUES (1666, '1648881410631270427', '控制测量', NULL, NULL, NULL, NULL, NULL, '根据现场情况确定。');
INSERT INTO `cmc_project_work` VALUES (1667, '1648881410631270458', '国能四川阿水电力开发有限公司绰斯甲水电站工程测量中心技术服务（2024年）', NULL, '项', '1', '2024-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1668, '1648881410631270459', '四川省雅砻江两河口水电站工程测量中心服务（2024年）', NULL, '项', '1', '2024-01-31', NULL, '暂定完成时间，具体以甲方要求为准。');
INSERT INTO `cmc_project_work` VALUES (1669, '1648881410631270436', '河道1：500断面测量', '1:500', 'km', '9.6', '2024-04-30', NULL, '48条断面');
INSERT INTO `cmc_project_work` VALUES (1670, '1648881410631270436', '断面基点测量', '五等/四等', '点', '48', '2024-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1671, '1648881410631270419', '3.土壤立地条件普查。', NULL, '项', '1', '2023-12-31', NULL, '重点普查土壤野外调查采样点所在区域的地形地貌、植被类型、气候、水文地质等情况。');
INSERT INTO `cmc_project_work` VALUES (1672, '1648881410631270419', '4.土壤利用情况普查。', NULL, '项', '1', '2023-12-31', NULL, '结合采样点土壤样品野外采集，重点普查基础设施条件、种植制度、耕作方式、灌排设施情况、植物生长及作物 ');
INSERT INTO `cmc_project_work` VALUES (1673, '1648881410631270419', '5.土壤数据库构建。', NULL, '项', '1', NULL, NULL, '建立标准化、规范化的土壤空间和属性数据库。空间数据库包括土壤类型图、土壤质量图、土壤利用适宜性评价图');
INSERT INTO `cmc_project_work` VALUES (1674, '1648881410631270419', '6.土壤质量状况分析。', NULL, '项', '1', NULL, NULL, '利用普查取得的土壤理化和生物性状、剖面性状和利用情况等基础数据，评价土壤利用适宜性，土壤分析质量，摸');
INSERT INTO `cmc_project_work` VALUES (1675, '1648881410631270419', '7.普查成果汇交汇总。', NULL, '项', '1', NULL, NULL, '按照区、市两级的统一部署，开展分级土壤普查成果汇总，包括图件成果、数据成果、文字成果和数据库成果。');
INSERT INTO `cmc_project_work` VALUES (1676, '1648881410631270420', '工程现场全面摸底调查', NULL, '项', '1', NULL, NULL, '包括库区蓄水方案及现状、监测设备安装位置及环境现状、各观测断面作业情况、了解作业期间水质水文及气象条');
INSERT INTO `cmc_project_work` VALUES (1677, '1648881410631270420', '仪器和设备安装（水温自动监测记录仪器）', NULL, '个', '455', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1678, '1648881410631270420', '仪器和设备安装（自动在线观测平台）', NULL, '套', '2', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1679, '1648881410631270420', '库区水温观测技术服务', NULL, '年', '4', '2027-12-31', NULL, '自合同签订生效之日起算，暂定为2023年12月1日至2027年12月31日，具体开始时间以委托人通知为准。');
INSERT INTO `cmc_project_work` VALUES (1680, '1648881410631270422', '外部变形监测网复测', NULL, '项', '1', '2024-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1681, '1648881410631270422', '坝前地形及横剖面测绘', NULL, '项', '1', '2024-01-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1682, '1648881411499491336', 'GNSS平面控制测量', '五等', '点', '6', '2023-12-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1683, '1648881411499491336', '工程区地形图测绘', '1:5000', 'km²', '62', '2023-12-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1684, '1648881411499491336', '高程控制测量', '四等', 'km', '4', '2023-12-11', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1685, '1648881410631270402', '泥沙监测断面测量', NULL, 'km', '14.5', '2023-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1686, '1648881410631270402', '泥沙监测断面设施检查、修复、基准点校核', NULL, '个', '58', '2023-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1687, '1648881410631270402', '水尺检查、校核和修复', NULL, '组', '5', '2023-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1688, '1648881410631270402', '测量资料整编', NULL, '项', '1', '2023-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1689, '1648881410631270402', '水库泥沙淤积、下游河道冲刷及水位分析，库容分析，水库调度运行方式建议', NULL, '项', '1', '2023-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1690, '1648881410631270402', '泥沙监测专题分析报告编制', NULL, '项', '1', '2023-05-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1691, '1648881410631270402', '乙方的工作内容包括（但不限于）以上内容，详见本项目合同附件3技术规范书。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1692, '1648881410643853314', '1:500地形图测绘（含水下）', '1:500', 'km²', '0.6', NULL, NULL, '以任务书要求范围为准。');
INSERT INTO `cmc_project_work` VALUES (1693, '1648881410643853314', '1:200横断面测量', '1:200', 'km', '40', NULL, NULL, '以任务书要求范围为准。');
INSERT INTO `cmc_project_work` VALUES (1694, '1648881410643853314', '其他测量', '项', '项', '1', NULL, NULL, '现状树木及植被分布位置、配合拍摄等工作。');
INSERT INTO `cmc_project_work` VALUES (1695, '1648881410631270405', 'Z1～Z2镇墩间钢管位移监测', NULL, '项', '1', NULL, NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_project_work` VALUES (1696, '1648881410631270405', '压力钢管伸缩节变形监测', NULL, '项', '1', NULL, NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_project_work` VALUES (1697, '1648881410631270405', 'Z13镇墩基础及周边边坡稳定监测', NULL, '项', '1', NULL, NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_project_work` VALUES (1698, '1648881410631270405', '水工检查', NULL, '项', '1', NULL, NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_project_work` VALUES (1699, '1648881410631270405', '羊湖压力钢管资料整编分析', NULL, '项', '1', NULL, NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_project_work` VALUES (1700, '1648881410631270405', '沉降、水平位移测量', NULL, '项', '1', NULL, NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_project_work` VALUES (1701, '1648881410631270405', '引水隧洞洞身等情况，伸缩缝开合和止水情况', NULL, '项', '1', NULL, NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_project_work` VALUES (1702, '1648881410631270405', '资料整编分析', NULL, '项', '1', NULL, NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_project_work` VALUES (1703, '1648881411499491380', '现场辅助放点配合测量', '图根', '点', '500', NULL, NULL, '放征地红线拐点等，预计现场放点500个，图根级。');
INSERT INTO `cmc_project_work` VALUES (1704, '1648881410631270417', '地形图测绘', '1:1000', 'km²', '15', '2023-11-30', NULL, '需测水下地形，50km长，水下80m，岸上220m考虑。');
INSERT INTO `cmc_project_work` VALUES (1705, '1648881410631270417', '横断面测量', '1:200', '项', '1', '2023-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1706, '1648881410631270417', '勘探', NULL, '项', '1', '2023-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1707, '1648881411499491380', '双柏树安置点地形图测绘', '1:500', 'km²', '0.2', NULL, NULL, '补测。完成时间现场与用户协商');
INSERT INTO `cmc_project_work` VALUES (1708, '1648881411499491342', '昭觉风电场址地形图测绘', '1:2000', 'km²', '31', '2023-11-19', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1709, '1648881411499491370', '雷波县元宝乡跑马坪村配合测量', NULL, '人.天', '9', '2023-07-05', NULL, '估算工作量；完善配合工作量签证手续。');
INSERT INTO `cmc_project_work` VALUES (1710, '1648881410631270408', '无人机倾斜摄影三维实景模型', '1:500', 'km²', '7', '2023-07-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1711, '1648881410631270408', '正射影像图制作', '1:500', 'km²', '7', '2023-07-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1712, '1648881410631270408', 'DEM制作', '1:500', 'km²', '7', '2023-07-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1713, '1648881411499491342', '宁南风电场址地形图测绘', '1:2000', 'km²', '7', '2023-11-19', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1714, '1648881410631270408', 'DLG制作', '1:500', 'km²', '7', '2023-07-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1715, '1648881411499491342', 'GNSS平面控制测量', '四等', '点', '12', NULL, NULL, '昭觉8个点；宁南4个点；');
INSERT INTO `cmc_project_work` VALUES (1716, '1648881410631270421', ' 土建工程', NULL, '项', '1', NULL, NULL, '2023年5月1日至2025年9月30日。其中2023年5月1日至2023年9月30日为工程建设期，2023年10月1日至2025年9月30');
INSERT INTO `cmc_project_work` VALUES (1717, '1648881410631270421', '本底测量工程', NULL, '项', '1', NULL, NULL, '详见合同第21页至第29页 描述');
INSERT INTO `cmc_project_work` VALUES (1718, '1648881410631270421', ' 水位站建设', NULL, '项', '1', NULL, NULL, '详见合同第21页至第29页 描述');
INSERT INTO `cmc_project_work` VALUES (1719, '1648881410631270413', '地形图测绘', '1:2000', 'km²', '0.06', '2023-08-11', NULL, '外业已完成，需尽快提交成果资料。');
INSERT INTO `cmc_project_work` VALUES (1720, '1648881410631270421', ' 承包人为完成本合同所需的其他工程项目和工作内容', NULL, '项', '1', NULL, NULL, '详见合同第21页至第29页 描述');
INSERT INTO `cmc_project_work` VALUES (1721, '1648881411499491335', 'GNSS平面控制测量', '四等', '点', '9', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1722, '1648881411499491335', '高程控制测量', '四等', 'km', '45', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1723, '1648881411499491335', '白马西路河应急通道右岸地形图补测', '1:2000', 'km²', '11.2', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1724, '1648881411499491333', '地形图测绘', '1:2000', 'km²', '321.2', '2024-01-17', NULL, '完成本项目4个标段测区的合图工作，包含全场址测绘面积约739km²。Ⅰ标段提交全场最终测绘成果（合图）的时');
INSERT INTO `cmc_project_work` VALUES (1725, '1648881411499491333', '其他', NULL, '项', NULL, '2024-01-17', NULL, '地形图拼接、分幅。');
INSERT INTO `cmc_project_work` VALUES (1726, '1648881411499491333', 'GNSS平面控制测量', '四等', '点', '6', '2024-01-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1727, '1648881411499491333', '高程控制测量', '四等', 'km', '56', '2024-01-17', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1728, '1648881411499491332', '场址地形图测绘', '1:2000', 'km²', '50', '2023-12-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1729, '1648881411499491332', 'GNSS平面控制测量', '五等', '点', '8', '2023-12-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1730, '1648881411499491332', '高程控制测量', '四等', 'km', '4', '2023-12-29', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1731, '1648881411499491331', '2号光伏道路补测地形图测绘', '1:2000', 'km²', '19.5', '2024-01-16', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1732, '1648881411499491331', '八宿3号光伏场址地形图测绘', '1:2000', 'km²', '48', '2024-01-16', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1733, '1648881411499491331', 'GNSS平面控制测量', '四等', '点', '9', '2024-01-16', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1734, '1648881411499491331', '高程控制测量', '四等', 'km', '4', '2024-01-16', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1735, '1648881414066405379', '隧道监测', NULL, '项', '1', NULL, NULL, '具体工作包括：①外业埋点（如果项目需要则理）、数据采集、现场巡查及监测数据处理，并上传甲方基础设施大');
INSERT INTO `cmc_project_work` VALUES (1736, '1648881411499491331', '八宿2号光伏场址地形图测绘', '1:2000', 'km²', '73', '2024-01-16', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1737, '1648881414066405379', '施工影响范围内的周边地表、管线、道路及建构筑物监测', NULL, '项', '1', NULL, NULL, '主要工作内容详见合同第二条中的工作量参考表。');
INSERT INTO `cmc_project_work` VALUES (1738, '1648881414066405379', '深基坑、高边坡监测', NULL, '项', '1', NULL, NULL, '本项目工期为1460日历天。');
INSERT INTO `cmc_project_work` VALUES (1739, '1648881411138781188', '扎西绕登沟鱼道出口河道地形图测绘（含水下地形）', '1:1000', 'km²', '0.12', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1740, '1648881410480275457', '工程区地形图测绘', '1:10000', 'km²', '43.24', '2023-05-08', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1741, '1648881410480275457', '上下库地形图测绘', '1:5000', 'km²', '8.1', '2023-05-08', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1742, '1648881410480275457', '控制测量', '五等', '点', '6', '2023-05-08', NULL, '上、下库各3点。如上库不具备条件，在下库布设4点。');
INSERT INTO `cmc_project_work` VALUES (1743, '1648881411499491381', '现场界桩调查配合工作', NULL, '项', '1', NULL, NULL, '预计2个组；完善配合工作单签证。');
INSERT INTO `cmc_project_work` VALUES (1744, '1648881411499491381', '现场界桩放线与测量', NULL, '项', '1', NULL, NULL, '等待通知开展');
INSERT INTO `cmc_project_work` VALUES (1745, '1648881411499491381', '界桩制作、运输、开挖、埋设', NULL, '项', '1', NULL, NULL, '等待通知开展');
INSERT INTO `cmc_project_work` VALUES (1746, '1648881410631270407', '大坝及边坡监测设备安装及设施完善', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1747, '1648881411499491381', '建设征地红线图绘制', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1748, '1648881410631270407', '监测控制网观测及资料分析', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1749, '1648881411499491381', '界桩布置设计', NULL, '项', '1', '2023-07-21', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1750, '1648881411788898306', '工作内容包括:对范围内的市政排水管道开展结构性、功能性排查,对市政排水检查井、雨水口进行检查，对排水口', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1751, '1648881411788898306', '本项目工作范围为南岸区南坪片区;普查对象为南岸区南坪片区管径D≥300mm的市政排水管网，具体范围以甲方提', NULL, NULL, NULL, NULL, NULL, '工期要求: 60日历天，提交前乙方须完成内部检查验收工作。');
INSERT INTO `cmc_project_work` VALUES (1752, '1648881410631270407', '变形监测控制网建设', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1753, '1648881410631270415', '数字正射影像', '1:500', 'km²', NULL, '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1754, '1648881411499491347', '地形图测绘', '1:2000', 'km²', '12.78', '2023-10-25', NULL, '中间资料提交时间按一周考虑，现场客观原因无法满足的提前与项目部沟通');
INSERT INTO `cmc_project_work` VALUES (1755, '1648881411499491347', 'GNSS平面控制测量', '四等', '点', '6', '2023-10-25', NULL, '上下库各布设3个控制点。');
INSERT INTO `cmc_project_work` VALUES (1756, '1648881411499491347', '高程控制测量', '四等', 'km', '14', '2023-10-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1757, '1648881410631270418', '（1）仪器设备供货', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1758, '1648881410631270418', '1）测斜管（含配套接头、孔口及孔底保护盖等）的供货、运输及装卸、设备检验、验收、保管；', NULL, '项', '232', '2024-01-31', NULL, '（1）土建施工、设备安装：自合同签订之日起270天内完成测斜孔钻孔、测斜管安装及回填灌浆、配套设施施工等');
INSERT INTO `cmc_project_work` VALUES (1759, '1648881410631270418', '2）活动式测斜仪的供货、运输及装卸、设备检验、验收、保管。', NULL, '项', '1', '2024-01-31', NULL, '（2）试运行：土建施工及设备安装完成，并取得基准值后试运行1个月。');
INSERT INTO `cmc_project_work` VALUES (1760, '1648881410631270415', '数字线划图', '1:500', 'km²', NULL, '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1761, '1648881410631270418', '（2）土建施工、设备安装及试运行', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1762, '1648881410631270418', '1）测斜孔钻孔；', NULL, 'm', '232', '2024-01-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1763, '1648881410631270418', '2）测斜管安装及回填灌浆；', NULL, '项', '1', '2024-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1764, '1648881410631270418', '3）孔口保护装置等配套设施施工。', NULL, '点', '5', '2024-02-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1765, '1648881410631270418', '4）测斜孔试运行。', NULL, '项', '1', '2024-05-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1766, '1648881410631270418', '（3）为完成上述工作的各类非永久工程。', NULL, '项', '1', '2024-05-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1767, '1648881411499491334', 'GNSS平面控制测量', '四等', '点', '4', '2024-01-08', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1768, '1648881411499491334', '高程控制测量', '四等', 'km', '22', '2024-01-08', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1769, '1648881411138781188', '玉松普曲鱼道出口河道地形图测绘（含水下地形）', '1:1000', 'km²', '0.06', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1770, '1648881411138781188', 'ML水电站坝下河道水下地形图测绘', '1:1000', 'km²', '7', '2023-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1771, '1648881411138781187', '阿江组～决尼组驿道地形图测绘', '1:2000', 'km²', '0.572', NULL, NULL, '长度5.724km，宽度按驿道两边各50m。完成时间请与用户沟通。');
INSERT INTO `cmc_project_work` VALUES (1772, '1648881411499491330', '6座复建桥梁桥址河道断面形态以及桥墩、桥台的形态测量', '1:500', '项', '6', '2023-12-20', NULL, '需包含沿桥轴线的河道断面形态，以及桥墩、桥台的形态，两岸测至桥面高程以上10m');
INSERT INTO `cmc_project_work` VALUES (1773, '1648881411138781187', '西河组～西河组吊桥驿道地形图测绘', '1:2000', 'km²', '0.106', NULL, NULL, '长度1.054km，宽度按驿道两边各50m');
INSERT INTO `cmc_project_work` VALUES (1774, '1648881411138781187', '甲郎组～尼呷组驿道地形图测绘', '1:2000', 'km²', '0.372', NULL, NULL, '长度3.712km，宽度按驿道两边各50m');
INSERT INTO `cmc_project_work` VALUES (1775, '1648881411138781187', '尼呷组驿道地形图测绘', '1:2000', 'km²', '0.024', NULL, NULL, '长度0.239km，宽度按驿道两边各50m');
INSERT INTO `cmc_project_work` VALUES (1776, '1648881410631270423', '地形图测绘', '1:2000', 'km²', '56.5', '2024-01-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1777, '1648881410631270423', 'GNSS平面控制测量', '五等', '点', '14', '2024-01-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1778, '1648881410631270423', '高程控制测量', '四等', 'km', '6', '2024-01-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1779, '1648881411499491334', '八宿8#光伏地形图测绘', '1:2000', 'km²', '140', '2024-01-08', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1780, '1648881411499491338', '坝区地形图测绘', '1:1000', 'km²', '0.89', '2023-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1781, '1648881411499491338', '坝区水下地形图测绘', '1:1000', 'km²', '0.1', '2023-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1782, '1648881411499491338', '五等GNSS测量', '五等', '点', '6', '2023-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1783, '1648881411499491338', '三维地形面', '1:1000', 'km²', '0.89', '2023-11-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1784, '1648881411499491337', 'ABH项目地形图', '1:10000', '幅', '47', NULL, NULL, '矢量化地形图；签订合同后7个日历天内提交全部成果。');
INSERT INTO `cmc_project_work` VALUES (1785, '1648881411138781189', '刘河坝地形图测绘', '1:1000', 'km²', '0.15', NULL, NULL, '尽快安排，完成时间与用户沟通。范围：北至泥石流排导槽，东至S211（包括路），南至那栋房子（包括房子），');
INSERT INTO `cmc_project_work` VALUES (1786, '1648881410631270451', '实景三维制作（影像分辨率优于5cm）', '1:500', 'km²', '81', '2024-01-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1787, '1648881410631270425', '永善移民配合测量', NULL, '人.天', NULL, NULL, NULL, '要求下周一（8号）到达现场。1个组');
INSERT INTO `cmc_project_work` VALUES (1788, '1648881410631270424', '挖角集镇排洪渠1地形图测绘', '1:1000', 'km²', '0.61', '2024-01-14', NULL, '2000国家大地坐标，85国家高程基准。');
INSERT INTO `cmc_project_work` VALUES (1789, '1648881410631270424', 'GNSS平面控制测量', '五等', '点', '4', '2024-01-14', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1790, '1648881410631270424', '高程控制测量', '四等', 'km', '2', '2024-01-14', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1791, '1648881411138781190', '地形图测绘', '1:5000', 'km²', '84', NULL, NULL, '工程区已有1：2000地形图缩为1：5000。');
INSERT INTO `cmc_project_work` VALUES (1792, '1648881420227837954', '泸县国土三调服务项目', NULL, '项', '1', NULL, NULL, '技术要求、产品质量、工期等，按合同要求执行。');
INSERT INTO `cmc_project_work` VALUES (1793, '1648881411499491388', '施控网成果复核', NULL, '项', '1', '2023-05-03', NULL, '进场时间与甲方沟通');
INSERT INTO `cmc_project_work` VALUES (1794, '1648881411499491388', 'GNSS平面控制测量', '三等', '点', '9', '2023-05-03', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1795, '1648881411499491388', '三角高程测量', '四等', 'km', '60', '2023-05-03', NULL, '通视边长三等测量3-6条。');
INSERT INTO `cmc_project_work` VALUES (1796, '1648881411499491387', '点位配合测量', NULL, '人.天', NULL, NULL, NULL, '配合人天数，按实际发生为准，完成时间待定');
INSERT INTO `cmc_project_work` VALUES (1797, '1648881411499491384', '地形图测绘（含水下地形）', '1:1000', 'km²', '2.5', NULL, NULL, '估算量，以实际工作量计算。');
INSERT INTO `cmc_project_work` VALUES (1798, '1648881410631270406', 'GNSS测量', '四等', '点', '5', '2023-05-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1799, '1648881410631270406', '特征点放样', '图根', '点', '5', '2023-05-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1800, '1648881410631270406', '土方量计算', NULL, '项', '1', '2023-05-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1801, '1648881410631270406', '土方平衡报告', NULL, '项', '1', '2023-05-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1802, '1648881411499491378', '日岗沟地形图补测', '1:1000', 'km²', '1.15', '2023-06-10', NULL, '此处的工作量与原雅砻江牙根二级水电站可研阶段日岗沟渣场1000地形图有部分重合，此次测量成果需与原地形拼');
INSERT INTO `cmc_project_work` VALUES (1803, '1648881411499491374', 'GNSS平面控制测量 ', '四等', '点', '6', '2023-06-30', NULL, '提供二套坐标：CGCS2000；独立坐标');
INSERT INTO `cmc_project_work` VALUES (1804, '1648881411499491374', '高程控制测量 ', '四等', 'km', '10', '2023-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1805, '1648881411499491363', '工程区地形图测绘', '1:5000', 'km²', '42', '2023-08-27', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1806, '1648881411499491363', '上下库地形图测绘', '1:2000', 'km²', '5', '2023-08-27', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1807, '1648881411499491374', '地形图测绘', '1:500', 'km²', '3.35', '2023-06-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1808, '1648881411499491363', 'GNSS控制测量', '五等', '点', '6', '2023-08-27', NULL, '上、下库分别布设3个控制点。');
INSERT INTO `cmc_project_work` VALUES (1809, '1648881411499491363', '高程控制测量', '四等', 'km', '4', '2023-08-27', NULL, '三角高程测量。');
INSERT INTO `cmc_project_work` VALUES (1810, '1648881411499491361', '克日沟渣场地形图测绘', '1:1000', 'km²', '6.6', '2023-08-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1811, '1648881411499491364', '工程区地形图测绘', '1:5000', 'km²', '26.6', '2023-08-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1812, '1648881411499491364', 'GNSS控制测量', '五等', '点', '3', '2023-08-20', NULL, '下库布设3个控制点。');
INSERT INTO `cmc_project_work` VALUES (1813, '1648881411499491364', '高程控制测量', '四等', 'km', '4', '2023-08-20', NULL, '三角高程测量。');
INSERT INTO `cmc_project_work` VALUES (1814, '1648881411499491365', '岩比乡水下地形图测绘', '1:2000', 'km²', '0.074', '2023-09-15', NULL, '预计9月初根据现场情况开展水下测量工作');
INSERT INTO `cmc_project_work` VALUES (1815, '1648881411499491365', '金沙集镇供水工程取水口地形地类图测绘', '1:500', 'km²', '0.091', '2023-09-15', NULL, '预计8月21日进场先开展此项工作');
INSERT INTO `cmc_project_work` VALUES (1816, '1648881411499491365', '金沙集镇供水工程供水线路地形地类图', '1:2000', 'km²', '3.00', '2023-09-15', NULL, '预计8月21日进场先开展此项工作');
INSERT INTO `cmc_project_work` VALUES (1817, '1648881411499491365', '污水处理厂地块、金沙小学地块、作英二组地块欧曲水下地形图测绘', '1:2000', 'km²', '0.09', '2023-09-15', NULL, '从测图水面线起向欧曲方向至测图范围');
INSERT INTO `cmc_project_work` VALUES (1818, '1648881411499491365', '白玉隧道堤防新建堤防地形图复核及水下地形图测绘', '1:2000', 'km²', '0.032', '2023-09-15', NULL, '原测图时，现堤防未建成，现已建成，对地形图复核完善并从原测图水面线起向欧曲方向测水下地形至测图范围边');
INSERT INTO `cmc_project_work` VALUES (1819, '1648881411499491365', 'GNSS控制测量', '五等', '点', '4', '2023-09-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1820, '1648881411499491365', '高程控制测量', '四等', 'km', NULL, '2023-09-15', NULL, '根据现场实际情况确定工作量。');
INSERT INTO `cmc_project_work` VALUES (1821, '1648881411499491360', '地形地类图测绘', '1:2000', 'km²', '0.4', NULL, NULL, '完成时间与用户沟通。工程坐标系、CGCS2000坐标系两套成果');
INSERT INTO `cmc_project_work` VALUES (1822, '1648881411499491360', 'GNSS平面控制测量', '五等', '点', '3', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1823, '1648881411499491360', '高程控制测量', '四等', 'km', '9', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1824, '1648881411499491357', '下库1#支沟上游1:1000地形图测绘', '1:1000', 'km²', '0.5', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1825, '1648881411499491358', '双柏树实物指标配合测量', NULL, '人.天', '105', NULL, NULL, '预估工作量，以配合工作量签认单为结算依据。');
INSERT INTO `cmc_project_work` VALUES (1826, '1648881411499491355', '上下库地形图测绘', '1:2000', 'km²', '3.9', '2023-09-15', NULL, '测区如有大面积耕地及时报项目部。');
INSERT INTO `cmc_project_work` VALUES (1827, '1648881411499491355', '工程区地形图测绘', '1:5000', 'km²', '23.66', '2023-09-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1828, '1648881411499491355', '料场地形图测绘', '1:5000', 'km²', '1.7', '2023-09-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1829, '1648881411499491366', '坝后段1:500地形图测绘', '1:500', 'km²', '0.06', '2023-08-10', NULL, '2000坐标，85国家高程基准');
INSERT INTO `cmc_project_work` VALUES (1830, '1648881410631270410', '地形图测绘', '1:500', 'km²', '0.037', '2023-07-19', NULL, '要求7月15日提供非正式地形图、土方量计算成果。');
INSERT INTO `cmc_project_work` VALUES (1831, '1648881411499491366', '渣场1:500地形图测绘', '1:500', 'km²', '0.04', '2023-08-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1832, '1648881411499491362', '库区移实物指标配合测量', NULL, '人.天', NULL, NULL, NULL, '工期预计15天。完善配合测量签认单。');
INSERT INTO `cmc_project_work` VALUES (1833, '1648881411788898307', '本项目检测地点为两江新区水土园区;检测对象为甲方指定区域内的排水管网。', NULL, NULL, NULL, NULL, NULL, '工期要求: 70日历天，提交前乙方须完成内部检查验收工作。');
INSERT INTO `cmc_project_work` VALUES (1834, '1648881411788898307', '工作内容包括:指定排水管网的功能性检测、结构性检测，包括排水口调查、检查井检查、雨水口检查等;配合完成', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1835, '1648881411499491354', 'GNSS控制测量', '四等', '点', '31', '2023-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1836, '1648881411499491354', '光伏场址地形图测绘', '1:500', 'km²', '16.98', '2023-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1837, '1648881411499491354', '高程控制测量', '四等', 'km', '70', '2023-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1838, '1648881411499491346', '地形图测绘', '1:500', 'km²', '0.5', '2023-11-07', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1839, '1648881411499491339', '鲁日沟流域地形图测绘', '1:5000', 'km²', '1.75', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1840, '1648881411499491339', '鲁日新址场地地形图测绘', '1:1000', 'km²', '0.228', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1841, '1648881411499491339', '德江新址场地地形图测绘', '1:1000', 'km²', '0.171', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1842, '1648881411499491339', '斗地水源取水线路地形图测绘', '1:1000', 'km²', '0.228', NULL, NULL, '线路长3.71km，取水沿线两侧各50m。下同');
INSERT INTO `cmc_project_work` VALUES (1843, '1648881411499491339', '洛俄昔水源取水线路地形图测绘', '1:1000', 'km²', '0.234', NULL, NULL, '线路长3.80km');
INSERT INTO `cmc_project_work` VALUES (1844, '1648881411499491339', '唐岗河新址水源取水线路地形图测绘', '1:1000', 'km²', '0.369', NULL, NULL, '线路长6.06km');
INSERT INTO `cmc_project_work` VALUES (1845, '1648881411499491339', '鲁日新址水源取水线路地形图测绘', '1:1000', 'km²', '0.248', NULL, NULL, '线路长4.04km');
INSERT INTO `cmc_project_work` VALUES (1846, '1648881411499491339', '德江新址水源取水线路地形图测绘', '1:1000', 'km²', '0.024', NULL, NULL, '线路长0.30km');
INSERT INTO `cmc_project_work` VALUES (1847, '1648881411499491339', '米龙新址水源取水线路地形图测绘', '1:1000', 'km²', '0.511', NULL, NULL, '线路长8.43km');
INSERT INTO `cmc_project_work` VALUES (1848, '1648881411499491339', '取水口地形图测绘', '1:500', 'km²', '0.008*6', NULL, NULL, '6个取水口，取水口以半径100m测图');
INSERT INTO `cmc_project_work` VALUES (1849, '1648881411499491339', '控制测量工作量详见上传附件', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1850, '1648881410555772930', 'GNSS控制测量', '五等', '点', '8', '2023-04-21', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1851, '1648881410555772930', '地形地类图测绘', '1:2000', 'km²', '4', '2023-04-21', NULL, '航飞后，先提供航拍资料和地形图成果');
INSERT INTO `cmc_project_work` VALUES (1852, '1648881411499491371', '金打公路以上50m至江边地形图测绘', '1:500', 'km²', '0.08', '2023-07-20', NULL, '含DOM、三维地形面制作');
INSERT INTO `cmc_project_work` VALUES (1853, '1648881414066405378', '文殊坊周边环境综合提升工程测绘项目', NULL, '项', '1', NULL, NULL, '补登2021年项目');
INSERT INTO `cmc_project_work` VALUES (1854, '1648881411499491371', '坝前左岸覆盖层边坡B区地形图测绘', '1:500', 'km²', '0.5', '2023-07-20', NULL, '只需提交DOM、三维地形面即可，不提交地形图成果。');
INSERT INTO `cmc_project_work` VALUES (1855, '1648881411499491371', '岩脉沟流域地形图测绘', '1:2000', 'km²', '1.2', '2023-07-20', NULL, '含DOM、三维地形面制作');
INSERT INTO `cmc_project_work` VALUES (1856, '1648881411499491371', 'GNSS平面控制测量', '五等', '点', '6', '2023-07-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1857, '1648881411499491371', '高程控制测量', '四等', 'km', '20', '2023-07-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1858, '1648881411499491382', 'DOM制作', '1:2000', 'km²', '33', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1859, '1648881411499491382', '三维地形面', '1:2000', 'km²', '33', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1860, '1648881411499491382', 'GNSS控制测量', '五等', '点', '6', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1861, '1648881411499491382', '高程控制测量', '四等', 'km', '150', NULL, NULL, '引测水准测量120km;三角高程内部串联30km。');
INSERT INTO `cmc_project_work` VALUES (1862, '1648881418764025857', 'GNSS测量', '三等', '点', '8', '2020-03-16', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1863, '1648881411499491382', '地形图测绘', '1:2000', 'km²', '33', NULL, NULL, '航飞68km²;成图面积33km²');
INSERT INTO `cmc_project_work` VALUES (1864, '1648881418764025857', '五等导线（代替四等三角高程）', '五等/四等', 'km', '25', '2020-03-19', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1865, '1648881418764025857', '坝区地形图测绘', '1:500', 'km²', '2.6', '2020-04-09', NULL, '以图上面积为准。');
INSERT INTO `cmc_project_work` VALUES (1866, '1648881418764025857', '库区地形图测绘', '1:2000', 'km²', '14', '2020-04-20', NULL, '以图上面积为准。');
INSERT INTO `cmc_project_work` VALUES (1867, '1648881418764025857', '二级坝址到南桠河口', '1:1000', 'km²', '1.2', '2020-04-20', NULL, '以图上面积为准。');
INSERT INTO `cmc_project_work` VALUES (1868, '1648881418764025857', '浸没区地形图测绘', '1:1000', 'km²', '6', '2020-04-20', NULL, '以图上面积为准。');
INSERT INTO `cmc_project_work` VALUES (1869, '1648881411499491359', '水库地形图（3400m高程以下）', '1:2000', 'km²', '161', NULL, NULL, '金沙江岗托大桥下游100m处~3215m库尾，色曲河口测至汇口以上500m，提供相应比例尺的三维地形面（扣除区域内');
INSERT INTO `cmc_project_work` VALUES (1870, '1648881411499491359', '库区主要变形体及滑坡地形图', '1:2000', 'km²', '7.4', NULL, NULL, '燃灯寺变形体及滑坡1km²、林切变形体及滑坡2.7km²、汪不顶滑坡2.3km²、热公滑坡1.4km²，提供相应比例尺的数');
INSERT INTO `cmc_project_work` VALUES (1871, '1648881411499491359', '八一桥和色通之间范围金沙江侧地形图', '1:2000', 'km²', '2.3', NULL, NULL, '提供相应比例尺的数字正射影像及三维地形面，与2020年测的色通图相接');
INSERT INTO `cmc_project_work` VALUES (1872, '1648881411499491359', '水库地形图（按照范围线收集）', '1:50000', '幅', '18', NULL, NULL, '收集地形图资料，提供相应比例尺三维地形面');
INSERT INTO `cmc_project_work` VALUES (1873, '1648881411499491359', '八一桥和色通之间范围色曲侧地形图', '1:5000', 'km²', '2.1', NULL, NULL, '提供相应比例尺的数字正射影像及三维地形面');
INSERT INTO `cmc_project_work` VALUES (1874, '1648881411499491359', '地形图测绘', '1:2000', 'km²', '0.6', NULL, NULL, '施工专业需要（业主营地、色曲河下游侧、临沟口、金沙江与色曲河汇合口、下游右岸）');
INSERT INTO `cmc_project_work` VALUES (1875, '1648881411499491359', '申弄人工骨料场补测地形图', '1:2000', 'km²', '1.2', NULL, NULL, '提供相应比例尺的数字正射影像及三维地形面需扣除已测量1:1000的范围');
INSERT INTO `cmc_project_work` VALUES (1876, '1648881411499491359', '水文断面及水边线测量', '1:2000', NULL, '水边线 22条断面', NULL, NULL, '坝下游~波罗回水末端（岩比乡尼朱村），每2km河段测1个大断面，包括水边线，支流色曲汇口和欧曲汇口需补测');
INSERT INTO `cmc_project_work` VALUES (1877, '1648881411499491359', 'GNSS控制测量', '二等', '点', '16', NULL, NULL, '联测国家点4点');
INSERT INTO `cmc_project_work` VALUES (1878, '1648881411499491359', 'GNSS控制测量', '三等', '点', '38', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1879, '1648881411499491359', 'GNSS控制测量', '五等', '点', '72', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1880, '1648881411499491359', '高程测量', '三等', 'km', '270', NULL, NULL, '岗托坝区至库尾单边135km，坝区国家水准点引测');
INSERT INTO `cmc_project_work` VALUES (1881, '1648881410631270436', '1:2000水边线测量', '1:2000', 'km', '93', '2024-12-31', NULL, '高水、中水、低水各测量1次');
INSERT INTO `cmc_project_work` VALUES (1882, '1648881410631270436', '流量测验', NULL, '个', NULL, '2024-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1883, '1648881410631270441', '1:5000地形图测绘', '1:5000', 'km²', '11.6', '2024-05-10', NULL, '需与原图接边');
INSERT INTO `cmc_project_work` VALUES (1884, '1648881410631270437', '库区标识牌制作及埋设', NULL, '点', '50', '2024-04-15', NULL, '预估工作量。标识牌上应标明“坝前水位2425m淹没范围线”字样');
INSERT INTO `cmc_project_work` VALUES (1885, '1648881410631270443', '高程控制测量', '四等', 'km', '30', '2024-05-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1886, '1648881410631270443', '三维地形面', '1:1000', 'km²', '6.97', '2024-05-10', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1887, '1648881410631270443', '工程区1:1000地形图测绘', '1:1000', 'km²', '6.97', '2024-05-10', NULL, '进场后15天内完成');
INSERT INTO `cmc_project_work` VALUES (1888, '1648881410631270448', '1:500现时水边线测量', '1:500', 'km', '20', '2024-09-30', NULL, '5-9每月测一次');
INSERT INTO `cmc_project_work` VALUES (1889, '1648881410631270448', '1:500地形图测绘（含水下地形）', '1:500', 'km²', '0.92', '2024-06-14', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1890, '1648881410631270448', '五等GNSS测量', '五等', '点', '3', '2024-06-14', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1891, '1648881410631270466', '工程区1:2000地形图测绘', '1:2000', 'km²', '48.25', '2024-07-05', NULL, '同时提供三维地形面和DOM');
INSERT INTO `cmc_project_work` VALUES (1892, '1648881410631270466', 'GNSS控制测量', '五等', '点', '6', '2024-07-05', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1893, '1648881410631270466', '高程控制测量', '四等', 'km', '13', '2024-07-05', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1894, '1648881410631270460', '导水槽开挖、验基、制模、浇筑、盖板、修建', NULL, '项', '1', '2024-12-30', NULL, '羊湖取水口水位校核工程');
INSERT INTO `cmc_project_work` VALUES (1895, '1648881410631270460', '取水口水准工作基点埋设安装', NULL, '项', '1', '2024-12-30', NULL, '羊湖取水口水位校核工程');
INSERT INTO `cmc_project_work` VALUES (1896, '1648881410631270460', '联测、取水口、尾水二等水准外业测量', NULL, '项', '1', '2024-12-30', NULL, '羊湖取水口水位校核工程');
INSERT INTO `cmc_project_work` VALUES (1897, '1648881410631270460', '水准测量数据内业处理', NULL, '项', '1', '2024-12-30', NULL, '羊湖取水口水位校核工程');
INSERT INTO `cmc_project_work` VALUES (1898, '1648881410631270460', '双金属标膨胀、温度系数测定', NULL, '项', '1', '2024-11-26', NULL, '羊湖电站压力钢管变形监测控制网复测校核工程');
INSERT INTO `cmc_project_work` VALUES (1899, '1648881410631270460', '双金属标联系测量', NULL, '项', '1', '2024-12-30', NULL, '羊湖电站压力钢管变形监测控制网复测校核工程');
INSERT INTO `cmc_project_work` VALUES (1900, '1648881410631270460', '校核网年度观测', NULL, '项', '1', '2024-12-30', NULL, '羊湖电站压力钢管变形监测控制网复测校核工程');
INSERT INTO `cmc_project_work` VALUES (1901, '1648881410631270460', '变形基准网年度复测', NULL, '项', '1', '2024-12-30', NULL, '羊湖电站压力钢管变形监测控制网复测校核工程');
INSERT INTO `cmc_project_work` VALUES (1902, '1648881410631270460', '压力钢管轴线偏移测量独立观测网校核', NULL, '项', '1', '2024-12-30', NULL, '羊湖电站压力钢管变形监测控制网复测校核工程');
INSERT INTO `cmc_project_work` VALUES (1903, '1648881410631270460', '镇墩、支墩变形网年度复测', NULL, '项', '1', '2024-12-30', NULL, '羊湖电站压力钢管变形监测控制网复测校核工程');
INSERT INTO `cmc_project_work` VALUES (1904, '1648881410631270438', '局部1:500地形图测绘', '1:500', 'km²', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1905, '1648881410631270438', 'ML公路放线测量', NULL, 'km', '10', NULL, NULL, '现场配合放线测量，预计清明节后2个组进场。');
INSERT INTO `cmc_project_work` VALUES (1906, '1648881410631270445', '界桩布置设计', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1907, '1648881410631270445', '现场界桩放线与测量', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1908, '1648881410631270445', '界桩制作、运输、开挖、埋设', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1909, '1648881410631270445', '建设征地红线图绘制', NULL, '项', '1', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1910, '1648881410631270464', '近坝淤积监测断面', '1:200', '条', '3', '2024-12-30', NULL, '主汛期前完成。');
INSERT INTO `cmc_project_work` VALUES (1911, '1648881410631270464', '坝下尾水淤积监测断面', '1:200', '条', '16', '2024-12-30', NULL, '汛前及汛后各一次');
INSERT INTO `cmc_project_work` VALUES (1912, '1648881410631270464', '荷花池大桥生态流量监测断面', '1:200', '条', '2', '2024-12-30', NULL, '汛前及汛后各一次');
INSERT INTO `cmc_project_work` VALUES (1913, '1648881410631270464', '水下淤积地形测量', '1:500', '项', '1', '2024-12-30', NULL, '如需要施测');
INSERT INTO `cmc_project_work` VALUES (1914, '1648881410631270464', '数据处理及报告编制', NULL, '项', '1', '2024-12-30', NULL, '汛前及汛后各一次');
INSERT INTO `cmc_project_work` VALUES (1915, '1648881410631270452', '风电场区地形图测绘', '1:1000', 'km²', '22.8', '2024-01-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1916, '1648881410631270452', '升压站和风机平台地形图测绘', '1:500', 'km²', '0.3', '2024-01-31', NULL, '风机位未定，需加强与用户沟通落实，建议在初选机位附近扩大高精度飞行范围。');
INSERT INTO `cmc_project_work` VALUES (1917, '1648881410631270452', 'GNSS平面控制测量', '四等', '点', '20', '2024-01-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1918, '1648881410631270452', '高程控制测量', '四等', 'km', '60', '2024-01-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1919, '1648881410631270426', '三道桥放线配合测量', NULL, '人.天', NULL, NULL, NULL, '1个组1辆车，计划15号会同城乡公司人员一起进场。');
INSERT INTO `cmc_project_work` VALUES (1920, '1648881410631270426', '三道桥地形图补测', '1:1000', 'km²', '0.25', NULL, NULL, '已有地形图因施工变化，重测面积约0.2km²');
INSERT INTO `cmc_project_work` VALUES (1921, '1648881410631270457', '大渡河金川水电站工程测量中心劳务配合（2024年）', NULL, '项', '1', '2024-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1922, '1648881410631270456', '四川大渡河双江口水电站枢纽工程测量中心服务（2024年）', NULL, '项', '1', '2024-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1923, '1648881410631270440', '1:10000地形图测绘（含水下地形）', '1:10000', 'km²', '1', '2024-04-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1924, '1648881410631270449', '交通1:2000带状地形图测绘', '1:2000', 'km²', '0.8', '2024-06-24', NULL, '同时提供三维地形面');
INSERT INTO `cmc_project_work` VALUES (1925, '1648881410631270449', '环保1:1000断面地形图', '1:1000', 'km', '1.4', '2024-06-24', NULL, '10条');
INSERT INTO `cmc_project_work` VALUES (1926, '1648881410631270449', '断面基点测量', '五等/四等', '点', '20', '2024-06-24', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1927, '1648881410631270449', '移民1：2000库区地形图测绘', '1:2000', 'km²', '1.48', '2024-06-24', NULL, '含水下地形，同时提供三维地形面');
INSERT INTO `cmc_project_work` VALUES (1928, '1648881410631270449', '厂区1:1000地形图测绘', '1:1000', 'km²', '2.1', '2024-06-17', NULL, '同时提供三维地形面');
INSERT INTO `cmc_project_work` VALUES (1929, '1648881410631270455', '四川省脚木足河巴拉水电站工程测量中心技术服务(2024年)', NULL, '项', '1', '2024-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1930, '1648881410631270432', '工程区1:10000地形图测绘', '1:10000', 'km²', '147', '2024-03-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1931, '1648881421276413954', '数字正射影像（DOM）', '1:2000', 'km²', '20', '2019-11-20', NULL, '沱江河(江阳段)支流：利水河、丰光河、米溪沟、南井河、久桥河共计66.51km长河段。控制点要求每条河/镇不少');
INSERT INTO `cmc_project_work` VALUES (1932, '1648881421276413954', '数字线划专用图（DLG）', '1:2000', 'km²', '20', '2019-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1933, '1648881421276413954', '数字高程模型 (DEM)', '1:2000', 'km²', '20', '2019-11-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1934, '1648881421276413954', '管理线桩（牌）', NULL, '点/座', '80', '2019-12-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1935, '1648881421276413954', '告示牌', NULL, '点/座', '30', '2019-12-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1936, '1648881410631270432', 'ABH卫星影像采购', NULL, 'km²', '1000', '2024-03-22', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1937, '1648881421276413954', '控制点', 'E级', '点', '20', '2019-12-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1938, '1648881421276413954', '数据入库', NULL, '项', '1', '2019-12-20', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1939, '1648881421276413954', '航空摄影', '1:2000', 'km²', '20', '2019-10-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1940, '1648881410631270467', '完成水口电站坝区控制网复测，监测坝区控制网的变位情况，并结合测量成果对坝区控制网变位情况进行分析。', NULL, NULL, NULL, '2024-09-30', NULL, '乙方自合同签订之日起45日内进场作业，2024年9月30日前提交正式技术报告。');
INSERT INTO `cmc_project_work` VALUES (1941, '1648881410631270467', '水口电站坝区一等平面控制网测量', '一等', '点', '18', '2024-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1942, '1648881410631270467', '水口电站坝区一等高程控制网测量', '一等', 'km', '10.3', '2024-09-30', NULL, '路线总长约10.3km，共74点（包含24个监测控制点和50个变形监测点）');
INSERT INTO `cmc_project_work` VALUES (1943, '1648881410631270467', '观测资料整理，观测成果计算，控制网稳定性分析评价 ', NULL, '项', '1', '2024-09-30', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1944, '1648881410631270428', '地形图测绘', '1:2000', 'km²', ' 29.6', '2024-02-09', NULL, '该工作量含了2022C36工作，工作不要做重了，另该范围需做DOM和三维地形面');
INSERT INTO `cmc_project_work` VALUES (1945, '1648881410631270428', '地形图测绘', '1:1000', 'km²', '24', '2024-02-09', NULL, '该范围需做DOM和三维地形面。');
INSERT INTO `cmc_project_work` VALUES (1946, '1648881410631270453', '雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测（2024年）', NULL, '项', '1', '2024-12-31', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1947, '1648881410631270431', '土地整理区1:1000地形地类图测绘', '1:1000', 'km²', '0.06', NULL, NULL, '4块，尽快完成');
INSERT INTO `cmc_project_work` VALUES (1948, '1648881410631270431', '引水线路1:1000地形地类图测绘', '1:1000', 'km²', '1.86', NULL, NULL, '完成时间与用户沟通');
INSERT INTO `cmc_project_work` VALUES (1949, '1648881410631270431', 'GNSS测量', '五等', '个', '4', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1950, '1648881410631270431', '高程控制测量', '四等', 'km', '10', NULL, NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1951, '1648881410631270433', '梭磨河松岗电站闸址、厂房及尾水等1：1000地形图测绘（含水下地形）', '1:1000', 'km²', '0.3', '2024-03-25', NULL, '需提供DOM');
INSERT INTO `cmc_project_work` VALUES (1952, '1648881410631270433', '梭磨河热足电站闸址1：1000水下地形图测绘', '1:1000', 'km²', '0.05', '2024-03-25', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1953, '1648881410631270439', '一期风电场区及场内道路1:2000地形图测绘', '1:2000', 'km²', '124.6', '2024-05-03', NULL, '内外业3折计价');
INSERT INTO `cmc_project_work` VALUES (1954, '1648881410631270439', 'GNSS控制测量', '四等', '点', '10', '2024-05-03', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1955, '1648881410631270439', '高程控制测量', '四等', 'km', '4', '2024-05-03', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1956, '1648881410631270454', '雅砻江桐子林水电站大坝外部变形和近坝区滑坡体观测（2024年）', NULL, '项', '1', '2024-12-31', NULL, '请按照合同要求开展监测工作');
INSERT INTO `cmc_project_work` VALUES (1957, '1648881410631270461', '羊湖电站变形监测及资料整编', NULL, '项', '1', '2024-11-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1958, '1648881410631270461', '直孔电站变形监测及资料整编', NULL, '项', '1', '2024-11-26', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1959, '1648881410631270435', '1:500地形图测绘', '1:500', 'km²', '30.3', '2024-04-14', NULL, '光伏项目，结算系数暂定外业0.2，内业0.3。');
INSERT INTO `cmc_project_work` VALUES (1960, '1648881410631270435', 'GNSS控制测量', '四等', '点', '10', '2024-04-14', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1961, '1648881410631270435', '高程控制测量', '四等', 'km', '5', '2024-04-14', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1962, '1648881410631270446', '中山生态保护科研园地形图1:500地形图测绘', '1:500', 'km²', '0.2', '2024-06-12', NULL, '需按用户要求标注植物类型和大树胸径。');
INSERT INTO `cmc_project_work` VALUES (1963, '1648881410631270446', '高山生态保护科研园地形图1:500地形图测绘', '1:500', 'km²', '0.15', '2024-06-12', NULL, '需按用户要求标注植物类型和大树胸径。');
INSERT INTO `cmc_project_work` VALUES (1964, '1648881410631270447', '道孚抽水蓄能电站上水库1:1000三维地形面', '1:1000', 'km²', '2.04', NULL, NULL, '补充协议签订后15日历天内完工');
INSERT INTO `cmc_project_work` VALUES (1965, '1648881410631270447', '道孚抽水蓄能电站下水库1:1000三维地形面', '1:1000', 'km²', '1.11', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (1966, '1648881410631270447', '道孚抽水蓄能电站下水库备用料场地1:1000三维地形面', '1:1000', 'km²', '0.45', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (1967, '1648881410631270447', '道孚抽水蓄能电站上水库渣场1:1000三维地形面', '1:1000', 'km²', '0.89', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (1968, '1648881410631270447', '道孚抽水蓄能电站下水库桑其柯石岸冲沟1:1000三维地形面', '1:1000', 'km²', '0.96', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (1969, '1648881410631270447', '道孚抽水蓄能电站下水库1#渣场1:1000三维地形面', '1:1000', 'km²', '1.91', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (1970, '1648881410631270447', '道孚抽水蓄能电站桑其柯与盘龙沟汇口1:2000三维地形面', '1:1000', 'km²', '0.32', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (1971, '1648881410631270447', '道孚抽水蓄能电站上水库施工工厂设施1:2000三维地形面', '1:1000', 'km²', '0.49', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (1972, '1648881410631270447', '道孚抽水蓄能电站沿盘龙沟汇口以上1.8km至3km施工临建范围1:2000三维地形面', '1:1000', 'km²', '0.44', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (1973, '1648881410631270447', '道孚抽水蓄能电站施工总布置范围1:2000三维地形面', '1:1000', 'km²', '7.75', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (1974, '1648881410631270447', '道孚抽水蓄能电站沿桑其柯对外交通范围1:2000三维地形面', '1:1000', 'km²', '3.40', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (1975, '1648881410631270447', '道孚抽水蓄能电站沿庆大河对外交通范围1:2000三维地形面', '1:1000', 'km²', '8.08', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (1976, '1648881410631270447', '道孚抽水蓄能电站工程区全范围（不含1-12部分）1:2000三维地形面', '1:1000', 'km²', '14.23', NULL, NULL, '同上');
INSERT INTO `cmc_project_work` VALUES (1977, '1648881410631270465', '枢纽区1:1000地形图测绘（含水下地形）', '1:1000', 'km²', '13.3', '2024-07-15', NULL, '同时提供三维地形面');
INSERT INTO `cmc_project_work` VALUES (1978, '1648881410631270465', '施工区1:2000地形图测绘（含水下地形）', '1:2000', 'km²', '20', '2024-07-15', NULL, '同时提供三维地形面，需要预可阶段地形图接边。');
INSERT INTO `cmc_project_work` VALUES (1979, '1648881410631270465', 'GNSS控制点', '四等', '点', '10', '2024-07-15', NULL, NULL);
INSERT INTO `cmc_project_work` VALUES (1980, '1648881410631270465', '高程控制测量', '四等', 'km', '70', '2024-07-15', NULL, '单边');
-- INSERT INTO `cmc_project_work` VALUES (1981, '1648881410631270468', '阳嘎拉沟1:1000地形图测绘、三维地形面', '1:1000', 'km²', '4.04', '2024-07-20', NULL, '同时提供三维地形面和DOM');
-- INSERT INTO `cmc_project_work` VALUES (1982, '1648881410631270468', '大岩洞区域1:1000地形图测绘、三维地形面', '1:1000', 'km²', '3.91', '2024-07-20', NULL, NULL);
-- INSERT INTO `cmc_project_work` VALUES (1983, '1648881410631270469', '1：500数字线划图', '1:500', 'km²', '112.38', '2024-11-30', NULL, '工期需与业主进一步协调');
-- INSERT INTO `cmc_project_work` VALUES (1984, '1648881410631270469', '1：500数字正射影像', '1:500', 'km²', '112.38', '2024-11-30', NULL, '第一包55.81km²，第二包56.57km²');
-- INSERT INTO `cmc_project_work` VALUES (1985, '1648881410631270470', '红原刷经寺抽水蓄能水电站枢纽区地形图', '1:2000', 'km²', '23.4', '2024-07-31', NULL, NULL);
-- INSERT INTO `cmc_project_work` VALUES (1986, '1648881410631270470', '三维地形面', '1:2000', 'km²', '23.4', '2024-07-31', NULL, '植被过滤后的');
-- INSERT INTO `cmc_project_work` VALUES (1987, '1648881410631270470', '控制测量', '三等', '点', NULL, NULL, NULL, '控制等级及工作量以实际为准');

-- ----------------------------
-- 25、cmc车辆信息表
-- ----------------------------
drop table if exists `cmc_car`;
create table `cmc_car`  (
  `car_id`				int					not null auto_increment		comment '车辆id',
  `license_plate`		varchar(8)			default null				comment '车牌号',
  `driver`				bigint				default null				comment '驾驶员（常用）',
  `acquisition_time`	date				default null				comment '上牌时间',
  `cost`				decimal(10,2)		default null				comment '总价',
  `expect_life`			int					default null				comment '预计使用年限',
  `expect_km`			int					default null				comment '预计行驶里程（万千米）',
  `brand`				varchar(10)			default null				comment '品牌',
  `series`				varchar(10)			default null				comment '车型',
  `is_rent`				char(1)				default null				comment '是否为租车',
  `day_cost`			decimal(10,2)		default null				comment '单日成本',
  `remark`				varchar(10)			default null				comment '备注',
  `status`				char(1)				default null				comment '状态',
  primary key (`car_id`)
) engine = innodb comment = 'cmc车辆信息表';

-- ----------------------------
-- 初始化-车辆信息表数据
-- ----------------------------
insert into `cmc_car` values (1, '川A5177U', 16, '2007-07-09 12:00:00', null, 15, 60, '奥迪', null, '0', 40, null, '1');
insert into `cmc_car` values (2, '川A1081W', 137, '2017-03-01 12:00:00', null, 15, 60, '丰田', null, '0', 40, null, '1');
insert into `cmc_car` values (3, '川A2239Q', 135, '2019-06-14 12:00:00', null, 15, 60, '特顺', null, '0', 40, null, '1');
insert into `cmc_car` values (4, '川A1686T', 136, '2022-02-23 12:00:00', null, 15, 60, '长城炮', null, '0', 40, null, '1');
insert into `cmc_car` values (5, '川A0T282', 130, '2021-08-06 12:00:00', null, 15, 60, '大通', null, '0', 40, null, '1');
insert into `cmc_car` values (6, '川A9802U', 132, '2022-04-27 12:00:00', null, 15, 60, '全顺', null, '0', 40, null, '1');
insert into `cmc_car` values (7, '川A6106T', 132, '2011-04-07 12:00:00', null, 15, 60, '全顺', null, '0', 40, null, '4');
insert into `cmc_car` values (8, '川AQ259W', 129, '2021-09-08 12:00:00', null, 15, 60, '吉利', null, '0', 40, null, '1');
insert into `cmc_car` values (9, '川A5U91Q', 134, '2019-08-20 12:00:00', null, 15, 60, '特顺', null, '0', 40, null, '1');
insert into `cmc_car` values (10, '川AEX607', 131, '2021-11-08 12:00:00', null, 15, 60, '福田', null, '0', 40, null, '1');
insert into `cmc_car` values (11, '川A99L3B', null, '2017-12-20 12:00:00', null, 15, 60, '长城', null, '0', 40, '二滩项目', '1');
insert into `cmc_car` values (12, '川A6692U', null, '2021-12-17 12:00:00', null, 15, 60, '五菱', null, '0', 40, '重庆分公司', '1');
insert into `cmc_car` values (13, '川GAR907', null, '2023-09-12 12:00:00', null, 15, 60, '长安', null, '0', 40, '重庆分公司', '1');
insert into `cmc_car` values (14, '川A3760U', null, '2023-08-31 12:00:00', null, 15, 60, '长城', null, '0', 40, '巴拉测量中心', '1');
insert into `cmc_car` values (15, '川A1950R', null, '2020-12-08 12:00:00', null, 15, 60, '大通', null, '0', 40, '双江口测量中心', '1');

-- ----------------------------
-- 26、cmc用车审批表
-- ----------------------------
drop table if exists `cmc_car_approval`;
create table `cmc_car_approval`  (
  `car_apply_id`		char(19)		not null		comment '用车申请id',
  `applier`				bigint			default null	comment '申请人',
  `use_dept`			bigint			default null	comment '使用部门',
  `cars`				varchar(10)		default null	comment '车辆id',
  `drivers`				varchar(20)		default null	comment '驾驶员id',
  `project_id`			char(19)		default null	comment '项目id',
  `car_usage`			char(1)			default null 	comment '申请用途',
  `apply_reason`		varchar(255)	default null 	comment '用车事由',
  `passengers`			int				default null 	comment '人数',
  `begin_date`			date			default null 	comment '开始日期',
  `end_date`			date			default null 	comment '结束日期',
  `days`				float			default null 	comment '天数',
  `dept_user_id`		bigint			default null 	comment '部门审批人',
  `dept_comment`		varchar(255)	default null 	comment '部门审批意见',
  `dept_time`			date			default null 	comment '部门审批时间',
  `manager_user_id`		bigint			default null 	comment '分管审批人',
  `manager_comment`		varchar(255)	default null 	comment '分管审批意见',
  `manager_time`		date			default null 	comment '分管审批时间',
  `union_user_id`		bigint			default null 	comment '工会审批人',
  `union_comment`		varchar(255)	default null 	comment '工会审批意见',
  `union_time`			date			default null 	comment '工会审批时间',
  `gm_user_id`			bigint			default null 	comment '总经理审批人',
  `gm_comment`			varchar(255)	default null 	comment '总经理审批意见',
  `gm_time`				date			default null 	comment '总经理审批时间',
  `dsz_user_id`			bigint			default null 	comment '董事长审批人',
  `dsz_comment`			varchar(255)	default null 	comment '董事长审批意见',
  `dsz_time`			date			default null 	comment '董事长审批时间',
  `dispatcher`			bigint			default null	comment '派车人',
  `dispatch_comment`	varchar(255)	default null 	comment '派车审批意见',
  `dispatch_time`		date			default null 	comment '派车审批时间',
  `estimate_cost`		decimal(10,2)	default null	comment '预计用车成本',
  `apply_date`			date			default null 	comment '申请日期',
  `return_date`			date			default null 	comment '返回时间',
  `kilometers`			varchar(10)		default null 	comment '行驶公里数',
  primary key (`car_apply_id`)
) engine = innodb comment = 'cmc用车审批表';

-- ----------------------------
-- 初始化-用车审批表数据
-- ----------------------------
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270001', 20, NULL, NULL, '58', NULL, '1', NULL, 3, '2021-08-20', '2021-08-20', NULL, 142, '同意。', '2021-08-20', 7, NULL, '2021-08-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2021-08-19', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270002', NULL, 108, '5', '130', '1648881415026900993', '0', NULL, 3, '2021-08-31', '2021-08-31', NULL, 39, '去项目现场，部门同意。', '2021-08-30', 11, NULL, '2021-08-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-08-31', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270003', 21, 105, '1', '16', NULL, '1', NULL, 1, '2021-08-24', '2021-08-25', NULL, 13, '已核，拟同意。', '2021-08-23', 7, NULL, '2021-08-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-08-23', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270004', 13, 105, '5', '130', NULL, '1', NULL, 2, '2021-09-03', '2021-09-03', NULL, 13, '请分管领导审批。', '2021-09-02', 7, NULL, '2021-09-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-09-02', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270005', 83, 111, '14', '75', '1648881415047872514', '0', NULL, 3, '2021-09-09', '2021-09-19', NULL, 83, '同意。', '2021-09-08', 10, '同意。', '2021-09-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-09-08', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270006', 39, 108, '3', '135', '1648881417400877057', '0', NULL, 2, '2021-09-10', '2021-09-10', NULL, 39, '参加项目专家验收会，望领导批准。', '2021-09-09', 11, NULL, '2021-09-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-09-09', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270007', 32, 107, '5', '130', '1648881414926237697', '0', NULL, 1, '2021-09-15', '2022-01-14', NULL, 32, NULL, '2021-09-14', 11, NULL, '2021-09-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-09-14', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270008', 9, 102, '1', '16', NULL, '1', NULL, 1, '2021-09-29', '2021-09-29', NULL, NULL, NULL, NULL, 2, '同意派车。', '2021-09-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-09-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270009', 145, 111, '6', NULL, NULL, '1', NULL, 2, '2022-01-05', '2022-01-06', NULL, 83, '同意。', '2022-01-04', 10, '同意', '2022-01-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-01-04', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270010', 17, 104, '4', '136', NULL, '1', NULL, 1, '2022-03-10', '2022-03-10', NULL, 112, '同意。', '2022-03-10', 2, '同意', '2022-03-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-03-09', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270011', NULL, 111, '7', '75', '1648881414657802242', '0', NULL, 2, '2021-10-12', '2021-10-23', NULL, 61, '情况属实', '2021-10-11', 10, '同意。', '2021-10-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-10-11', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270012', 145, 111, '3', '135', '1648881414276120578', '0', NULL, 2, '2021-11-16', '2021-12-14', NULL, 83, '同意。情况属实。', '2021-11-15', 10, '同意。', '2021-11-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-11-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270013', NULL, 111, '4', '136', '1648881413894438914', '0', NULL, 2, '2022-03-03', '2022-03-03', NULL, 83, '情况属实，建议派车。', '2022-03-02', 10, '同意。', '2022-03-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-03-01', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270014', 113, NULL, '14', '132', '1648881413751832578', '0', NULL, 2, '2022-03-22', '2022-04-05', NULL, 142, '同意。', '2022-03-21', 11, '同意', '2022-03-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-03-21', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270015', 20, NULL, '2', '131', NULL, '1', NULL, 2, '2022-03-27', '2022-03-29', NULL, 20, '同意申请！', '2022-03-24', 7, '同意！\n星期一项目人员会同自规局，向县主管领导汇报项目情况及落实收款事宜。', '2022-03-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-03-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270016', 145, 111, '4', '136', NULL, '1', NULL, 3, '2022-03-31', '2022-04-02', NULL, 83, '同意。', '2022-03-30', 10, '同意', '2022-04-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-03-30', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270017', 9, 102, '2', '16', NULL, '1', NULL, 2, '2022-03-31', '2022-04-02', NULL, NULL, NULL, NULL, 2, '同意', '2022-04-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-03-31', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270018', 17, 104, '1', '16', NULL, '1', NULL, 1, '2022-04-06', '2022-04-06', NULL, 112, '同意。', '2022-04-08', 2, '同意', '2022-04-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-04-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270019', 15, 115, NULL, '136', '1648881413227544578', '0', NULL, 2, '2022-04-24', '2022-04-26', NULL, 15, '同意', '2022-04-22', 7, '同意', '2022-04-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-04-22', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270020', 15, 115, '2', NULL, '1648881413277876226', '0', NULL, 2, '2022-04-17', '2022-04-19', NULL, 15, '同意', '2022-04-16', 7, '同意', '2022-04-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-04-16', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270021', 21, 105, '1', '16', NULL, '1', NULL, 1, '2022-05-15', '2022-05-10', NULL, 13, '已核', '2022-05-10', 7, '同意', '2022-05-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-05-09', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270022', 28, 109, '1', '16', NULL, '1', NULL, 1, '2022-06-01', '2022-06-01', NULL, 50, '符合实际需求。', '2022-05-31', 9, '同意。', '2022-05-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-05-31', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270023', 17, 104, '1', '16', NULL, '1', NULL, 1, '2022-06-02', '2022-06-02', NULL, 112, '同意。', '2022-06-06', 2, '同意', '2022-06-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-06-02', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270024', 17, 104, '1', '16', NULL, '1', NULL, 1, '2022-06-06', '2022-06-06', NULL, 112, '同意。', '2022-06-06', 2, '同意', '2022-06-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-06-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270025', 144, 115, '6', '131', '1648881412963303425', '0', NULL, 3, '2022-06-05', '2022-10-20', NULL, 15, '同意', '2022-06-06', 7, NULL, '2022-06-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-06-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270026', NULL, 108, '14', '132', '1648881415026900993', '0', NULL, 3, '2021-08-24', '2021-08-24', NULL, 39, '项目去现场，同意。', '2021-08-23', 11, NULL, '2021-08-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-08-23', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270027', NULL, 111, '7', '75', '1648881414976569346', '0', NULL, 2, '2021-08-27', '2021-09-03', NULL, 61, '情况属实，建议派车', '2021-08-26', 10, '同意。', '2021-08-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-08-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270028', 23, 105, '1', '16', NULL, '1', NULL, 3, '2021-09-06', '2021-09-07', NULL, 13, '已核，拟同意。需安排驾驶员通行，请分管领导审批。', '2021-09-02', 7, NULL, '2021-09-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-09-02', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270029', 142, NULL, '1', '16', NULL, '1', NULL, 3, '2021-09-03', '2021-09-03', NULL, 142, NULL, '2021-09-03', 7, NULL, '2021-09-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-09-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270030', 61, 111, '3', '135', '1648881414880100353', '0', NULL, 1, '2021-09-12', '2021-09-16', NULL, 61, '情况属实，建议派车。', '2021-09-07', 10, '同意。', '2021-09-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-09-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270031', 20, NULL, '6', NULL, NULL, '1', NULL, 2, '2021-09-12', '2021-09-15', NULL, 142, '同意', '2021-09-08', 7, NULL, '2021-09-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-09-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270032', 145, 111, '3', '135', '1648881414372589569', '0', NULL, 2, '2021-12-27', '2021-12-30', NULL, 83, '同意。', '2021-12-24', 10, '同意。', '2021-12-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-12-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270033', 145, 111, '6', NULL, '1648881414473252866', '0', NULL, 1, '2021-10-26', '2021-10-26', NULL, 83, '同意。', '2021-10-25', 10, '同意', '2021-10-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-10-25', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270034', 21, 105, '1', NULL, NULL, '1', NULL, 2, '2022-02-17', '2022-02-17', NULL, 13, '已核，拟同意。', '2022-02-16', 7, '同意', '2022-02-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排陈建贤前往目的地。', NULL, NULL, '2022-02-16', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270035', 71, 111, '14', '132', '1648881413667946498', '0', NULL, 3, '2022-02-26', '2022-03-08', NULL, 83, '同意。', '2022-02-24', 10, '同意', '2022-02-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-02-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270036', 61, 111, '5', '130', '1648881413512757249', '0', NULL, 3, '2022-03-19', '2022-06-11', NULL, 83, '同意。', '2022-03-18', 10, NULL, '2022-03-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，4.10孟底沟项目已结束，周建伟转场到夏志军牙根项目。', NULL, NULL, '2022-03-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270037', 144, 115, '3', '135', '1648881413441454081', '0', NULL, 2, '2022-03-26', '2022-04-03', NULL, 15, '同意', '2022-03-24', 7, '同意', '2022-03-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-03-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270038', 35, 107, '4', '136', '1648881413311430658', '0', NULL, 2, '2022-04-03', '2022-04-13', NULL, 32, '同意', '2022-04-02', 11, '同意', '2022-04-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-04-02', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270039', 71, 111, '4', '136', '1648881413244321794', '0', NULL, 3, '2022-05-03', '2022-05-06', NULL, 83, '情况属实，同意申请。', '2022-04-29', 10, '同意。', '2022-05-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-04-29', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270040', 144, 115, '3', '135', '1648881413193990145', '0', NULL, 2, '2022-05-06', '2022-05-13', NULL, 15, '同意，具体出发时间与司机及时沟通', '2022-05-05', 7, '同意', '2022-05-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-05-05', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270041', 71, 111, '6', '16', '1648881413164630018', '0', NULL, 3, '2022-05-13', '2022-05-20', NULL, 83, '情况属实，同意申请。', '2022-05-12', 10, '同意。', '2022-05-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-05-12', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270042', 28, 109, '1', '16', NULL, '1', NULL, 1, '2022-05-27', '2022-05-27', NULL, 50, '符合实际需求。', '2022-05-26', 9, '同意。', '2022-05-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-05-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270043', 144, 115, '1', NULL, '1648881413210767362', '0', NULL, 2, '2022-06-06', '2022-06-10', NULL, 15, '同意', '2022-06-06', 7, NULL, '2022-06-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-06-02', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270044', 17, 104, '1', '16', NULL, '1', NULL, 1, '2022-06-09', '2022-06-09', NULL, 112, '同意。', '2022-06-08', 2, '同意', '2022-06-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-06-08', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270045', 113, NULL, '4', '16', '1648881412912971777', '0', NULL, 2, '2022-06-10', '2022-06-10', NULL, 20, '情况属实！', '2022-06-09', 11, '同意', '2022-06-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-06-09', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270046', 144, 115, '2', NULL, '1648881412892000257', '0', NULL, 3, '2022-01-01', '2022-07-11', NULL, 15, '同意', '2022-06-16', 7, NULL, '2022-06-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-06-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270047', 83, 111, '5', '130', '1648881412845862913', '0', NULL, 3, '2022-01-01', '2022-06-24', NULL, 83, '情况属实。', '2022-06-17', 10, '同意。', '2022-06-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-06-14', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270048', 101, 112, NULL, NULL, '1648881412774559745', '0', NULL, 2, '2022-06-22', '2022-06-28', NULL, 101, '同意。', '2022-06-20', 13, '同意。', '2022-06-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '租用车辆。', NULL, NULL, '2022-06-20', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270049', 101, 112, '1', NULL, NULL, '1', NULL, 2, '2022-06-21', '2022-06-22', NULL, 101, '同意', '2022-06-20', 7, NULL, '2022-06-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-06-20', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270050', 61, 111, '5', '130', '1648881421276413954', '0', NULL, 1, '2021-08-23', '2021-08-25', NULL, 61, '建议派车', '2021-08-19', 10, '同意。16日进场准备，17日现场验收。', '2021-08-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-08-19', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270051', 83, 111, '7', '136', '1648881414527778817', '0', NULL, 2, '2021-12-21', '2021-12-21', NULL, 83, '同意。', '2021-12-20', 10, '同意', '2021-12-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-12-20', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270052', 23, 105, '1', '16', NULL, '1', NULL, 2, '2022-01-03', '2022-01-04', NULL, 13, '已核，有配合单位同行。', '2021-12-31', 2, '同意派车。', '2021-12-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-12-31', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270053', 113, NULL, '14', '132', NULL, '1', NULL, 2, '2022-01-05', '2022-01-07', NULL, 20, '情况属实！', '2022-01-04', 10, '同意  2022W02项目', '2022-01-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-01-04', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270054', 24, 105, '7', '136', NULL, '1', NULL, 1, '2022-01-25', '2022-01-26', NULL, 13, '已核，拟同意。', '2022-01-23', 7, '同意', '2022-01-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-01-21', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270055', 83, 111, '7', NULL, NULL, '1', NULL, 2, '2022-02-15', '2022-02-19', NULL, 83, '同意。', '2022-02-14', 10, '同意', '2022-02-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排熊艳华前往。', NULL, NULL, '2022-02-14', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270056', 83, 111, '5', '130', '1648881413584060417', '0', NULL, 2, '2022-03-02', '2022-03-08', NULL, 83, '同意。', '2022-02-28', 10, '同意。', '2022-03-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-02-28', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270057', 113, NULL, '2', '131', '1648881419607080962', '0', NULL, 3, '2022-03-08', '2022-03-15', NULL, 142, '同意', '2022-03-14', 11, '同意', '2022-03-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-03-11', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270058', 34, 107, '4', '136', '1648881418185211906', '0', NULL, 2, '2022-03-23', '2022-03-29', NULL, 32, '同意', '2022-03-22', 11, '同意', '2022-03-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-03-22', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270059', 17, 104, '1', '16', NULL, '1', NULL, 1, '2022-03-22', '2022-03-22', NULL, 112, '同意。', '2022-03-23', 2, '同意派车。', '2022-03-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-03-22', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270060', 59, NULL, '1', '16', NULL, '1', NULL, 2, '2022-04-18', '2022-04-19', NULL, 20, '情况属实。', '2022-04-18', 11, '同意', '2022-04-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-04-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270061', 144, 115, '3', '135', '1648881413277876226', '0', NULL, 3, '2022-04-08', '2022-04-28', NULL, 15, '同意', '2022-04-07', 7, '同意', '2022-04-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-04-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270062', 39, 108, '1', '16', NULL, '1', NULL, 8, '2022-04-14', '2022-04-15', NULL, 39, '大坝平整度扫描比选测试，申请用车。', '2022-04-13', 9, '同意', '2022-04-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-04-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270063', 71, 111, '2', '131', '1648881413500174338', '0', NULL, 2, '2022-04-19', '2022-04-29', NULL, 83, '情况属实，同意。', '2022-04-18', 10, '同意。', '2022-04-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-04-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270064', 15, 115, '1', '16', '1648881413210767362', '0', NULL, 2, '2022-04-21', '2022-04-21', NULL, 15, '同意', '2022-04-21', 7, '同意', '2022-04-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-04-21', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270065', 144, 115, '2', '131', '1648881413877661698', '0', NULL, 3, '2022-05-08', '2022-05-19', NULL, 15, '同意', '2022-05-07', 7, '同意', '2022-05-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-05-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270066', 113, NULL, '3', '135', '1648881413093326850', '0', NULL, 3, '2022-05-24', '2022-05-27', NULL, 20, '情况属实。', '2022-05-23', 10, '同意。', '2022-05-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-05-23', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270067', 113, NULL, '3', '135', '1648881413667946498', '0', NULL, 2, '2022-05-16', '2022-05-19', NULL, 20, '情况属实。', '2022-05-12', 10, '经营发展部与成勘院移民专业接洽，项目需要派车。\n同意。', '2022-05-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-05-12', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270068', 71, 111, '6', '16', '1648881413164630018', '0', NULL, 3, '2022-05-26', '2022-05-26', NULL, 83, '情况属实，同意。', '2022-05-24', 10, '同意。', '2022-05-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-05-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270069', 71, 111, '3', '135', '1648881413483397121', '0', NULL, 3, '2022-06-04', '2022-07-06', NULL, 83, '情况属实。', '2022-06-01', 10, '同意。', '2022-06-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-06-01', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270070', 21, 105, '1', '16', NULL, '1', NULL, 2, '2022-07-10', '2022-07-11', NULL, 13, '已核，拟同意。', '2022-07-04', 7, NULL, '2022-07-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-07-04', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270071', 32, 107, '3', '135', NULL, '1', NULL, 1, '2022-07-10', '2022-09-06', NULL, 32, '同意', '2022-07-08', 11, '同意', '2022-07-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-07-08', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270072', 113, NULL, '4', '136', '1648881412631953410', '0', NULL, 4, '2022-07-10', '2022-07-15', NULL, 20, '情况属实。', '2022-07-13', 10, '同意。', '2022-07-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-07-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270073', 17, 104, '1', '16', NULL, '1', NULL, 1, '2022-08-01', '2022-08-01', NULL, 112, '同意。', '2022-08-01', 2, '同意', '2022-08-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-08-01', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270074', 34, 107, '4', '136', '1648881412594204674', '0', NULL, 3, '2022-07-18', '2022-07-29', NULL, 32, '同意', '2022-07-18', 11, '同意', '2022-07-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-07-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270075', 61, 111, '4', '132', '1648881414880100353', '0', NULL, 2, '2021-08-25', '2021-08-29', NULL, 83, '同意。', '2021-08-24', 10, '冕宁应急演练数据采集、泸定华电营地地形图测绘，两个项目合并用车。\n同意。', '2021-08-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-08-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270076', 39, 108, '14', '132', '1648881419619663874', '0', NULL, 4, '2021-09-09', '2021-09-19', NULL, 39, '项目检查，配合质检站检查', '2021-09-08', 10, '同意。', '2021-09-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-09-08', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270077', 145, 111, '1', '16', '1648881414657802242', '0', NULL, 2, '2021-10-08', '2021-10-11', NULL, 83, '同意。', '2021-10-08', 10, '同意。', '2021-10-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-10-08', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270078', 61, 111, '6', NULL, '1648881414880100353', '0', NULL, 3, '2021-10-10', '2021-10-14', NULL, 61, '情况属实', '2021-10-09', 10, '同意。', '2021-10-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-10-09', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270079', 83, 111, '7', '75', '1648881414527778817', '0', NULL, 1, '2021-10-27', '2021-11-19', NULL, 83, '同意。', '2021-10-26', 10, '同意.', '2021-10-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-10-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270080', 145, 111, '6', NULL, NULL, '1', NULL, 1, '2021-12-15', '2021-12-16', NULL, 83, '同意', '2021-12-15', 10, '同意', '2021-12-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-12-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270081', 9, 102, '14', '132', NULL, '1', NULL, 2, '2022-03-15', '2022-03-15', NULL, NULL, NULL, NULL, 2, '同意派车。', '2022-03-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排。（临时开的樊总车去的大邑）', NULL, NULL, '2022-03-14', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270082', 142, NULL, '1', '16', NULL, '1', NULL, 2, '2022-03-10', '2022-03-11', NULL, 142, '同意', '2022-03-09', 11, NULL, '2022-03-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-03-09', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270083', 32, 107, '5', NULL, NULL, '1', NULL, 2, '2022-01-20', '2022-01-23', NULL, 32, NULL, '2022-01-19', 10, '同意派车。', '2022-01-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-01-19', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270084', 21, 105, '1', '132', NULL, '1', NULL, 2, '2022-01-22', '2022-01-23', NULL, 13, '已核，项目前期对接，拟同意。', '2022-01-21', 7, '同意', '2022-01-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-01-21', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270085', 61, 111, '14', '132', '1648881413412093953', '0', NULL, 3, '2022-04-06', '2022-07-03', NULL, 83, '情况属实，同意。', '2022-04-02', 10, '同意。', '2022-04-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-04-02', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270086', 144, 115, '2', '131', '1648881413294653441', '0', NULL, 2, '2022-04-02', '2022-04-18', NULL, 15, '同意', '2022-04-01', 7, '同意', '2022-04-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-04-01', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270087', 34, 107, '2', '131', NULL, '1', NULL, 3, '2022-05-23', '2022-05-25', NULL, 32, '同意', '2022-05-26', 11, '同意', '2022-05-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-05-25', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270088', 55, 109, NULL, '16', '1648881418034216962', '0', NULL, 2, '2022-01-01', '2022-06-22', NULL, 50, '符合实际需求。', '2022-06-15', 9, '同意。', '2022-06-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '为了满足生产需要，租用市场车辆。', NULL, NULL, '2022-06-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270089', 21, 105, '4', '136', NULL, '1', NULL, 2, '2022-06-29', '2022-06-30', NULL, 13, '已核，拟同意。', '2022-06-27', 7, NULL, '2022-06-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-06-27', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270090', 17, 104, '4', '136', NULL, '1', NULL, 1, '2022-06-28', '2022-06-28', NULL, 112, '拟同意。', '2022-06-27', 2, '同意', '2022-06-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-06-28', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270091', 94, 111, '4', '136', '1648881412845862913', '0', NULL, 4, '2022-07-04', '2022-07-07', NULL, 83, '情况属实，同意用车。', '2022-07-02', 10, '同意。', '2022-07-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-07-01', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270092', 17, 104, '1', '16', NULL, '1', NULL, 1, '2022-07-01', '2022-07-01', NULL, 112, '同意。', '2022-07-04', 2, '同意', '2022-07-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-07-01', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270093', 83, 111, NULL, '132', '1648881412514512898', '0', NULL, 4, '2022-07-20', '2022-07-30', NULL, 83, '情况属实，同意用车。', '2022-07-19', 10, '同意。', '2022-07-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '租用车辆。', NULL, NULL, '2022-07-19', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270094', 83, 111, NULL, NULL, '1648881412443209730', '0', NULL, 4, '2022-07-27', '2022-09-18', NULL, 83, '情况属实。', '2022-07-26', 10, '同意', '2022-07-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排租车公司车辆。', NULL, NULL, '2022-07-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270095', 102, 112, '14', '132', '1648881412493541377', '0', NULL, 3, '2022-07-30', '2022-09-08', NULL, 102, NULL, '2022-07-28', 13, '同意。', '2022-07-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-07-28', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270096', 113, NULL, '2', '16', '1648881412384489473', '0', NULL, 2, '2022-08-03', '2022-08-02', NULL, 20, '情况属实。', '2022-08-02', 11, NULL, '2022-08-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-08-02', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270097', 94, 111, '2', '16', '1648881412594204674', '0', NULL, 3, '2022-01-01', '2022-07-29', NULL, 83, '情况属实，同意用车。', '2022-07-17', 10, '同意。', '2022-07-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-07-14', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270098', 15, 115, '5', '130', '1648881412610981889', '0', NULL, 2, '2022-07-18', '2022-08-03', NULL, 15, '同意', '2022-07-15', 7, NULL, '2022-07-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-07-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270099', 25, 105, '6', NULL, NULL, '1', NULL, 3, '2021-09-05', '2021-09-07', NULL, 13, NULL, '2021-09-03', 7, NULL, '2021-09-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-09-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270100', 142, NULL, '5', '130', NULL, '1', NULL, 2, '2008-01-01', '2021-08-26', NULL, 20, '情况属实。', '2021-08-25', 112, NULL, '2021-08-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '因下雨，用车计划取消。', NULL, NULL, '2021-08-25', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270101', 61, 111, '2', '131', '1648881414775242753', '0', NULL, 3, '2021-09-09', '2022-01-14', NULL, 61, '情况属实，建议派车。', '2021-09-07', 10, '同意。', '2021-09-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-09-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270102', 144, 115, '5', '130', '1648881414812991489', '0', NULL, 4, '2021-09-06', '2021-09-13', NULL, 15, '同意', '2021-09-06', 7, NULL, '2021-09-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-09-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270103', 144, 115, '14', '132', '1648881414695550978', '0', NULL, 3, '2021-09-24', '2021-11-21', NULL, 15, '同意借用车辆申请', '2021-09-23', 7, NULL, '2021-09-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-09-22', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270104', 83, 111, '3', '135', '1648881414527778817', '0', NULL, 3, '2021-10-17', '2021-10-17', NULL, 83, '同意。', '2021-10-16', 10, '同意。', '2021-10-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-10-16', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270105', 24, 105, '1', '16', NULL, '1', NULL, 3, '2021-11-12', '2021-11-12', NULL, 13, '同意。', '2021-11-09', 7, NULL, '2021-11-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-11-09', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270106', NULL, 111, '7', '136', '1648881414095765505', '0', NULL, 4, '2021-12-11', '2021-12-17', NULL, 61, '情况属实，建议派车。', '2021-12-08', 10, '同意。请综合事务部要求驾驶员严格遵守项目甲方相关规定。', '2021-12-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-12-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270107', 142, NULL, '1', '16', NULL, '1', NULL, 2, '2021-12-16', '2021-12-16', NULL, 142, '同意', '2021-12-15', 7, '同意', '2021-12-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-12-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270108', NULL, 111, '6', NULL, '1648881413483397121', '0', NULL, 2, '2022-03-28', '2022-04-10', NULL, 83, '同意', '2022-03-26', 10, '测区交通条件较差，请综合事务部、现场负责人要求驾驶员保持车况良好、谨慎驾驶，并做好森林防火。\n同意。', '2022-03-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-03-25', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270109', 21, 105, '3', '135', '1648881418881466369', '0', NULL, 2, '2022-01-10', '2022-01-11', NULL, 13, '已核。', '2022-01-10', 7, '同意', '2022-01-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-01-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270110', 83, 111, '3', '135', '1648881414641025025', '0', NULL, 2, '2022-04-07', '2022-04-05', NULL, 83, '同意。', '2022-04-05', 10, '请综合事务部做好测量保养检查，保障车辆状态良好；请驾驶员谨慎驾驶，注意冰雪路面、泥泞道路、高海拔地区等复杂路况，保障安全行驶。\n同意。', '2022-04-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '车辆车况已确保良好，相关注意事项已告知驾驶员。', NULL, NULL, '2022-04-05', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270111', NULL, 111, '5', '130', '1648881413877661698', '0', NULL, 2, '2022-02-13', '2022-02-23', NULL, 83, '同意。', '2022-02-12', 10, '同意。根据项目现场情况，请安排四驱车辆。', '2022-02-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排车辆。', NULL, NULL, '2022-02-12', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270112', 21, 105, '1', '136', NULL, '1', NULL, 1, '2022-02-22', '2022-02-23', NULL, 13, '已核，拟同意。', '2022-02-21', 7, '同意', '2022-02-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排熊艳华前往。', NULL, NULL, '2022-02-21', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270113', 32, 107, '4', '136', '1648881415286947841', '0', NULL, 2, '2022-05-31', '2022-06-09', NULL, 32, '同意。', '2022-05-30', 11, '同意', '2022-06-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-05-30', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270114', 49, NULL, '6', '16', NULL, '1', NULL, 3, '2022-05-12', '2022-05-12', NULL, 20, '情况属实。', '2022-05-11', 9, '同意。', '2022-05-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-05-11', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270115', 15, 115, '1', NULL, '1648881412892000257', '0', NULL, 4, '2022-06-13', '2022-06-10', NULL, 15, '同意用车，长途及高海拔，注意行车安全', '2022-06-10', 7, NULL, '2022-06-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-06-10', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270116', 32, 107, '4', '136', '1648881412845862913', '0', NULL, 2, '2022-06-13', '2022-06-23', NULL, 32, '同意，早上六点半出发', '2022-06-12', 11, '同意', '2022-06-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-06-12', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270117', 63, NULL, NULL, '58', NULL, '1', NULL, 2, '2022-01-01', '2022-06-25', NULL, 20, '情况属实。', '2022-06-17', 10, '同意。', '2022-06-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '租用车辆，已安排。', NULL, NULL, '2022-06-17', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270118', 94, 111, NULL, NULL, '1648881413114298369', '0', NULL, 1, '2022-06-29', '2022-06-29', NULL, 83, '同意用车，情况属实。', '2022-06-28', 10, '同意。', '2022-06-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-06-28', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270119', 61, 111, '14', '132', '1648881414410338305', '0', NULL, 2, '2022-07-07', '2022-07-20', NULL, 83, '情况属实，同意用车。', '2022-07-06', 10, '同意。', '2022-07-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-07-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270120', 32, 107, '4', '136', NULL, '1', NULL, 3, '2023-10-06', '2023-10-19', NULL, 32, '外业人员计划6号出发，由于项目未登记，按非项目借车', '2023-10-03', 10, '同意', '2023-10-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-10-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270121', 112, NULL, '1', '19', NULL, '1', NULL, 4, '2023-10-08', '2023-10-08', NULL, 112, '情况属实，建议派车。', '2023-10-07', 11, '同意派车', '2023-10-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '非总自驾前往', NULL, NULL, '2023-10-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270122', 34, 107, NULL, NULL, NULL, '1', NULL, 3, '2023-10-08', '2023-10-13', NULL, 32, '计划10月8号出发', '2023-10-07', 10, '同意', '2023-10-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-10-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270123', 113, NULL, '1', '16', '1648881412384489473', '0', NULL, 3, '2022-08-08', '2022-08-09', NULL, 20, '情况属实。', '2022-08-08', 11, '同意', '2022-08-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-08-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270124', 94, 111, NULL, NULL, '1648881415412776962', '0', NULL, 6, '2022-10-18', '2022-10-23', NULL, 83, '同意用车。', '2022-10-17', 10, '同意。', '2022-10-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '川A1686T负责航飞任务', NULL, NULL, '2022-10-17', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270125', 102, 112, '2', '16', '1648881412493541377', '0', NULL, 3, '2022-09-02', '2022-09-01', NULL, 102, '平面观测，需2辆车。', '2022-09-01', 10, '同意。', '2022-09-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已取消', NULL, NULL, '2022-09-01', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270126', 94, 111, NULL, NULL, '1648881411965059074', '0', NULL, 2, '2022-11-16', '2022-11-27', NULL, 83, '情况属实，同意用车。', '2022-11-15', 10, '同意。', '2022-11-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-11-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270127', 103, 112, '3', '135', '1648881412170579969', '0', NULL, 3, '2022-11-06', '2022-12-10', NULL, 101, '同意，该申请未补充之前派车申请。', '2022-12-08', 10, '同意。', '2022-12-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-11-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270128', 32, 107, '4', '136', '1648881411122003970', '0', NULL, 3, '2023-02-14', '2023-02-28', NULL, 32, '按计划2023年2月14号进场着巴，后转场到德登项目。部门负责两个项目的所有外业工作。', '2023-02-10', 10, '同意。高海拔地区作业，请加强安全交通管控，确保交通安全。', '2023-02-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-02-10', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270129', 61, 110, '5', '130', '1648881412443209730', '0', NULL, 1, '2023-08-12', '2023-08-19', NULL, 61, '情况属实，建议派车。', '2023-08-11', 10, '同意。', '2023-08-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排出发', NULL, NULL, '2023-08-11', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270130', 16, 104, NULL, '16', '1648881410832596993', '0', NULL, 6, '2023-03-19', '2023-03-25', NULL, 8, '情况属实，同意办理（补交用车申请）', '2023-06-05', 2, '同意', '2023-06-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '租用川G34H49陈建贤驾驶；川A779J租车公司李科明驾驶。', NULL, NULL, '2023-06-05', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270131', 17, 104, '1', '16', NULL, '1', NULL, 1, '2023-07-07', '2023-07-07', NULL, 8, '情况属实，建议派车！', '2023-07-07', 2, '同意', '2023-07-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-07-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270132', 33, 107, '1', '16', NULL, '1', NULL, 2, '2023-08-23', '2023-08-24', NULL, 32, '同意', '2023-08-22', 10, '同意', '2023-08-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-08-22', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270133', 16, 104, '1', '16', NULL, '2', NULL, 3, '2023-08-31', '2023-08-31', NULL, 8, '情况属实，同意办理', '2023-08-30', 4, NULL, '2023-08-30', 4, NULL, '2023-08-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-08-30', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270134', NULL, 111, '2', '16', '1648881411499491384', '0', NULL, 2, '2023-09-11', '2023-09-12', NULL, 84, '情况属实，同意', '2023-09-09', 10, '同意。', '2023-09-11', 4, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-09-08', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270135', 61, 110, NULL, NULL, '1648881411499491350', '0', NULL, 3, '2023-10-08', '2023-10-18', NULL, 61, '情况属实，建议派车', '2023-09-27', 10, '同意。', '2023-09-27', 4, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-09-27', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270136', 83, 111, '6', '137', '1648881411499491349', '0', NULL, 4, '2023-09-28', '2023-11-02', NULL, 83, '同意用车。', '2023-09-27', 10, '同意。', '2023-09-27', 4, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-09-27', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270137', 46, 109, NULL, '147', NULL, '1', NULL, 4, '2023-10-09', '2023-10-10', NULL, 46, '情况属实。', '2023-10-07', 9, '同意。', '2023-10-08', 4, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-10-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270138', 112, NULL, NULL, NULL, NULL, '1', NULL, 4, '2023-10-09', '2023-10-10', NULL, 112, '无需安排驾驶员，建议派车。', '2023-10-08', 11, '同意', '2023-10-10', 7, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '用车结束，刘总自驾。', NULL, NULL, '2023-10-08', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270139', 18, 104, '1', '19', NULL, '1', NULL, 2, '2023-10-11', '2023-10-11', NULL, 8, '情况属实，建议派车！', '2023-10-11', 2, '同意', '2023-10-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-10-10', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270140', 32, 107, NULL, '147', '1648881411499491347', '0', NULL, 2, '2023-10-11', '2023-10-16', NULL, 32, '同意', '2023-10-11', 11, '同意', '2023-10-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-10-11', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270141', 19, NULL, '1', '19', NULL, '1', NULL, 2, '2023-10-18', '2023-10-19', NULL, NULL, NULL, NULL, 4, '同意', '2023-10-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '10.19出发前往', NULL, NULL, '2023-10-17', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270142', 28, 109, '1', '16', NULL, '1', NULL, 1, '2023-10-18', '2023-10-18', NULL, 46, '归档资料较多。', '2023-10-17', 9, '同意。', '2023-10-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '单位没有车，自行打车前往', NULL, NULL, '2023-10-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270143', 63, 110, '2', '147', '1648881411499491381', '0', NULL, 1, '2023-10-18', '2023-10-18', NULL, 61, '情况属实，建议派车。', '2023-10-17', 10, '同意', '2023-10-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-10-17', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270144', 46, 109, NULL, NULL, NULL, '1', NULL, 3, '2023-10-23', '2023-10-29', NULL, 46, '同意。', '2023-10-18', 9, '同意。', '2023-10-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-10-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270145', 94, 111, NULL, NULL, '1648881411499491347', '0', NULL, 3, '2023-10-21', '2023-11-01', NULL, 84, NULL, '2023-10-18', 10, '同意', '2023-10-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-10-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270146', 39, 108, '6', '16', '1648881413806358530', '0', NULL, 2, '2022-10-21', '2022-10-23', NULL, 39, '按防疫要求做好五天三检，同意。', '2022-10-19', 9, '同意。', '2022-10-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-19', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270147', 21, 105, '1', NULL, NULL, '1', NULL, 2, '2022-12-25', '2022-12-25', NULL, 13, '已核，拟同意。', '2022-12-23', 7, '同意', '2022-12-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已取消', NULL, NULL, '2022-12-23', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270148', 144, 115, NULL, NULL, '1648881411587571714', '0', NULL, 2, '2022-12-27', '2023-01-03', NULL, 15, '同意', '2023-01-03', 7, '同意', '2023-01-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-12-27', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270149', 33, 110, '7', '133', '1648881411826647041', '0', NULL, 4, '2023-01-05', '2023-01-10', NULL, 33, '同意', '2023-01-04', 10, '同意。', '2023-01-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-01-04', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270150', 32, 107, '3', '135', '1648881412254466049', '0', NULL, 1, '2023-01-05', '2023-01-06', NULL, 32, '计划1月5号出发', '2023-01-03', 10, '同意。', '2023-01-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-01-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270151', 32, 107, '4', '136', '1648881411772121090', '0', NULL, 2, '2023-01-08', '2023-01-10', NULL, 32, '同意', '2023-01-07', 10, '同意。', '2023-01-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-01-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270152', 32, 107, '3', '135', '1648881411533045762', '0', NULL, 1, '2023-01-13', '2023-01-14', NULL, 32, '计划2023年1月13号进场', '2023-01-12', 10, '同意。', '2023-01-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-01-12', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270153', 23, 105, '1', '16', NULL, '1', NULL, 2, '2023-01-18', '2023-01-19', NULL, 13, '已核', '2023-01-31', 7, '同意', '2023-01-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-01-17', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270154', 32, 107, '7', '133', '1648881410929065985', '0', NULL, 2, '2023-02-27', '2023-03-03', NULL, 32, '计划2月27号进场', '2023-02-24', 10, '同意。', '2023-02-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-02-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270155', 50, 104, '1', '135', '1648881414527778817', '0', NULL, 2, '2023-03-09', '2023-03-10', NULL, 8, '已安排', '2023-03-08', 2, '同意', '2023-03-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-03-08', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270156', 101, 104, '7', '133', '1648881414527778817', '0', NULL, 1, '2023-05-07', '2023-05-10', NULL, 8, '已安排', '2023-05-08', 7, '同意', '2023-05-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已进场', NULL, NULL, '2023-05-08', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270157', 102, 112, '6', '137', '1648881410761293825', '0', NULL, 4, '2023-08-11', '2023-09-23', NULL, 102, NULL, '2023-08-09', 7, '同意', '2023-08-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-08-09', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270158', 33, 107, '3', '135', '1648881411499491382', '0', NULL, 2, '2023-06-02', '2023-06-23', NULL, 32, '计划6月2号出发', '2023-06-01', 10, '像控点分布广，行车距离远，严格管控交通安全。\n同意。', '2023-06-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已入场，6月8日周建伟驾驶川A0T282同朱倪强进场。', NULL, NULL, '2023-05-31', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270159', 8, 104, '1', '16', NULL, '2', NULL, 3, '2023-06-07', '2023-06-07', NULL, 8, '情况属实，根据车程建议派车', '2023-06-06', 4, '同意使用', '2023-06-06', 4, '同意使用', '2023-06-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-06-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270160', 16, 104, '1', '130', NULL, '1', NULL, 2, '2023-06-23', '2023-06-23', NULL, 8, '建议派车', '2023-06-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排完成', NULL, NULL, '2023-06-22', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270161', 72, 110, '5', '130', '1648881411499491375', '0', NULL, 2, '2023-06-29', '2023-07-07', NULL, 61, '情况属实', '2023-06-30', 10, '同意。', '2023-06-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排入场', NULL, NULL, '2023-06-29', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270162', 32, 107, '2', '132', '1648881411499491377', '0', NULL, 2, '2023-07-13', '2023-07-18', NULL, 32, '同时需要给盐源抽蓄项目装备无人船', '2023-07-12', 10, '同意。', '2023-07-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-07-12', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270163', 145, 115, '3', '135', '1648881411499491382', '0', NULL, 3, '2023-07-06', '2023-07-25', NULL, 15, '同意', '2023-07-05', 7, '同意', '2023-07-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排进场', NULL, NULL, '2023-07-04', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270164', 72, 110, '2', '132', '1648881411499491375', '0', NULL, 2, '2023-07-21', '2023-07-30', NULL, 61, NULL, '2023-07-20', 10, '同意。', '2023-07-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-07-21', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270165', 71, 110, '4', '136', '1648881411499491367', '0', NULL, 2, '2023-08-01', '2023-08-04', NULL, 61, '情况属实，请安排车辆。', '2023-07-31', 10, '同意。', '2023-07-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-07-31', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270166', 61, 110, '1', '16', '1648881411499491381', '0', NULL, 1, '2023-08-14', '2023-08-14', NULL, 61, '人员设备进场，情况属实。', '2023-08-13', 10, '同意。', '2023-08-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-08-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270167', 61, 110, '2', '16', '1648881411499491355', '0', NULL, 2, '2023-09-01', '2023-09-06', NULL, 61, '情况属实，请安排车辆。', '2023-08-31', 10, '同意。', '2023-09-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排入场', NULL, NULL, '2023-08-31', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270168', 46, 109, NULL, NULL, NULL, '1', NULL, 4, '2023-09-04', '2023-09-14', NULL, 46, '情况属实', '2023-09-04', 9, '同意。', '2023-09-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，租用普拉多。', NULL, NULL, '2023-09-04', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270169', 17, 104, '2', '16', NULL, '1', NULL, 1, '2022-09-20', '2022-09-20', NULL, 112, '同意。', '2022-09-20', 2, '同意', '2022-09-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-09-20', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270170', 17, 104, '3', '135', NULL, '1', NULL, 1, '2022-09-23', '2022-09-23', NULL, 112, '同意。', '2022-09-22', 2, '同意', '2022-09-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-09-22', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270171', 15, 115, '2', NULL, '1648881412384489473', '0', NULL, 5, '2022-09-27', '2022-09-28', NULL, 15, '同意', '2022-09-26', 7, '同意', '2022-09-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '经营管理层相关领导自驾。', NULL, NULL, '2022-09-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270172', 83, 111, '4', '136', '1648881413164630018', '0', NULL, 1, '2022-10-17', '2022-10-18', NULL, 83, '同意用车。', '2022-10-16', 10, '同意。', '2022-10-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-16', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270173', 144, 115, NULL, NULL, '1648881412141219841', '0', NULL, 2, '2022-11-14', '2022-11-22', NULL, 15, '同意', '2022-11-14', 7, '同意', '2022-12-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-11-11', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270174', 83, 111, NULL, NULL, '1648881414641025025', '0', NULL, 4, '2022-11-03', '2023-01-06', NULL, 83, '同意用车。', '2022-11-03', 10, '同意。', '2022-11-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '现场租车事宜已报务。', NULL, NULL, '2022-11-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270175', NULL, 111, '4', '136', '1648881410534801409', '0', NULL, 2, '2023-04-14', '2023-04-15', NULL, 84, '情况属实', '2023-04-15', 10, '同意。', '2023-04-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-04-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270176', 72, 111, '2', '16', '1648881411847618561', '0', NULL, 4, '2022-11-29', '2022-12-09', NULL, 61, '情况属实', '2022-11-29', 10, '同意。', '2022-11-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-11-28', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270177', 71, 111, NULL, '16', '1648881411885367297', '0', NULL, 2, '2022-12-27', '2023-01-04', NULL, 83, '情况属实，同意项目用车。', '2022-12-26', 10, '同意', '2022-12-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '租赁公司车辆完成生产任务。', NULL, NULL, '2022-12-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270178', 83, 111, '2', '16', '1648881410710962177', '0', NULL, 6, '2023-04-06', '2023-04-08', NULL, 83, '情况属实，建议同意用车。', '2023-04-06', 10, '同意。', '2023-04-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排入场', NULL, NULL, '2023-04-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270179', NULL, 111, '7', '133', '1648881411499491384', '0', NULL, 2, '2023-05-17', '2023-05-23', NULL, 84, '同意', '2023-05-16', 10, '同意。', '2023-05-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-05-16', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270180', 72, 110, '4', '136', '1648881411499491379', '0', NULL, 2, '2023-06-12', '2023-06-18', NULL, 61, '情况属实，建议派车', '2023-06-09', 10, '同意。', '2023-06-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，已于6月11日进场。', NULL, NULL, '2023-06-09', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270181', 16, 104, '1', '16', NULL, '2', NULL, 4, '2023-06-16', '2023-06-16', NULL, 8, '情况属实，建议派车', '2023-06-15', 4, '同意派车', '2023-06-15', 4, '同意派车', '2023-06-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-06-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270182', 61, 110, '6', '132', NULL, '1', NULL, 2, '2023-07-04', '2023-07-09', NULL, 61, NULL, '2023-07-03', 10, '同意。', '2023-07-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-07-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270183', 33, 107, '5', '130', '1648881411499491372', '0', NULL, 2, '2023-07-10', '2023-07-13', NULL, 32, NULL, '2023-07-07', 10, '同意。', '2023-07-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-07-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270184', 58, 104, '1', '132', NULL, '1', NULL, 2, '2023-07-10', '2023-07-10', NULL, 8, '情况属实，建议派车', '2023-07-07', 2, '同意', '2023-07-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-07-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270185', 71, 110, '6', '137', '1648881411499491368', '0', NULL, 2, '2023-07-25', '2023-07-27', NULL, 61, '情况属实', '2023-07-24', 10, '同意。', '2023-07-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已入场', NULL, NULL, '2023-07-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270186', NULL, 111, '5', '130', '1648881411499491366', '0', NULL, 2, '2023-08-02', '2023-08-04', NULL, 83, '情况属实，同意用车。', '2023-08-01', 10, '同意。', '2023-08-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-08-01', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270187', 32, 107, NULL, NULL, '1648881411499491352', '0', NULL, 2, '2023-09-10', '2023-09-15', NULL, 32, '计划9月10号出发', '2023-09-08', 10, '同意。', '2023-09-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-09-08', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270188', 10, 102, '2', '16', '1648881411499491359', '0', NULL, 2, '2023-09-18', '2023-09-27', NULL, NULL, NULL, NULL, 2, '同意', '2023-09-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-09-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270189', 94, 111, NULL, NULL, '1648881411499491354', '0', NULL, 3, '2023-09-20', '2023-09-29', NULL, 84, NULL, '2023-09-28', 10, '同意', '2023-10-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，行程已结束', NULL, NULL, '2023-09-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270190', 8, 104, '1', '147', NULL, '1', NULL, 3, '2023-09-21', '2023-09-21', NULL, 8, '同意', '2023-09-19', 2, '同意。', '2023-09-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-09-19', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270191', 61, 110, NULL, NULL, '1648881410631270414', '0', NULL, 1, '2023-09-21', '2023-09-21', NULL, 61, '情况属实', '2023-09-21', 10, '同意', '2023-09-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，行程已结束', NULL, NULL, '2023-09-21', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270192', 71, 111, '5', '130', '1648881412254466049', '0', NULL, 6, '2022-09-26', '2022-10-03', NULL, 83, '情况属实，同意派车。', '2022-09-23', 10, '同意。', '2022-09-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '川A1686T,熊艳华，二个车前往目的地。 ', NULL, NULL, '2022-09-23', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270193', NULL, 111, '3', '135', NULL, '1', NULL, 2, '2022-10-12', '2022-10-12', NULL, 83, '同意用车。', '2022-10-12', 10, '同意。', '2022-10-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-11', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270194', 61, 111, '3', '135', '1648881416243249154', '0', NULL, 5, '2022-10-14', '2022-10-28', NULL, 61, '情况属实', '2022-10-13', 10, '同意。', '2022-10-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270195', 55, 109, '2', '132', '1648881418239737858', '0', NULL, 3, '2022-10-18', '2022-10-25', NULL, 46, '情况属实。', '2022-10-17', 9, '同意。', '2022-10-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-17', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270196', 23, 105, '1', '16', NULL, '1', NULL, 4, '2022-10-19', '2022-10-21', NULL, 21, NULL, '2022-10-19', 7, '同意', '2022-10-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-19', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270197', 83, 111, '4', '136', '1648881412254466049', '0', NULL, 4, '2022-10-21', '2022-11-03', NULL, 83, '同意用车。', '2022-10-27', 10, '同意。', '2022-10-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-27', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270198', 144, 115, '2', '132', '1648881412023779329', '0', NULL, 2, '2022-10-31', '2022-11-03', NULL, 15, '同意', '2022-11-14', 7, '同意', '2022-11-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-28', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270199', 94, 111, NULL, NULL, '1648881412074110977', '0', NULL, 2, '2022-10-27', '2022-11-17', NULL, 83, '情况属实，同意用车。', '2022-11-07', 10, '同意。', '2022-11-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '租车需求已报备，同意。', NULL, NULL, '2022-11-04', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270200', 35, 107, '1', '16', '1648881413164630018', '0', NULL, 2, '2022-11-22', '2022-11-22', NULL, 32, '同意', '2022-11-21', 10, '同意。', '2022-11-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-11-21', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270201', 33, 107, '4', '136', '1648881410832596993', '0', NULL, 3, '2023-03-05', '2023-03-22', NULL, 32, '同意', '2023-03-04', 10, '同意。', '2023-03-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-03-04', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270202', 32, 107, '3', '16', '1648881410849374209', '0', NULL, 1, '2023-03-09', '2023-03-12', NULL, 32, '同意', '2023-03-08', 10, '同意。', '2023-03-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-03-08', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270203', 32, 107, '3', '16', NULL, '1', NULL, 3, '2023-03-14', '2023-03-14', NULL, 32, '同意', '2023-03-13', 10, '同意。', '2023-03-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-03-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270204', 61, 110, NULL, NULL, '1648881410899705858', '0', NULL, 3, '2023-04-05', '2023-04-28', NULL, 61, '情况属实，建议派车。', '2023-04-03', 10, '同意。', '2023-04-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，4月7日凌涛到眉山替换租用驾驶员。', NULL, NULL, '2023-04-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270205', NULL, 111, '7', '133', '1648881411499491381', '0', NULL, 1, '2023-05-25', '2023-05-26', NULL, 84, '同意', '2023-05-25', 10, '同意。', '2023-05-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-05-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270206', 145, 115, '3', '135', '1648881411499491388', '0', NULL, 3, '2023-04-28', '2023-05-07', NULL, 15, '同意', '2023-05-04', 7, '同意', '2023-05-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已进场', NULL, NULL, '2023-04-27', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270207', 46, 109, '5', '130', NULL, '1', NULL, 2, '2023-05-31', '2023-06-01', NULL, 46, '同意。', '2023-05-26', 9, '同意。', '2023-05-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-05-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270208', NULL, 111, '7', '133', '1648881411499491384', '0', NULL, 2, '2023-05-30', '2023-06-01', NULL, 84, '同意', '2023-05-29', 10, '同意。', '2023-05-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-05-29', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270209', 58, 104, '2', '16', NULL, '1', NULL, 2, '2023-07-02', '2023-07-03', NULL, 8, '情况属实，建议派车！', '2023-06-30', 9, '同意 。', '2023-07-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-06-30', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270210', 55, 109, '4', '136', '1648881410929065985', '0', NULL, 2, '2023-07-10', '2023-07-13', NULL, 46, '项目成果检查。同意。', '2023-07-07', 9, '同意。', '2023-07-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排入场', NULL, NULL, '2023-07-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270211', NULL, 113, '1', '16', '1648881411906338818', '0', NULL, 1, '2023-07-17', '2023-07-17', NULL, NULL, NULL, '2023-07-16', 2, '同意派车。', '2023-07-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-07-16', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270212', 33, 107, '4', '136', '1648881411499491364', '0', NULL, 3, '2023-08-10', '2023-08-24', NULL, 32, '计划8月10号出发', '2023-08-09', 10, '同意。', '2023-08-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-08-09', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270213', 71, 111, '4', '136', '1648881413114298369', '0', NULL, 2, '2022-01-01', '2022-08-05', NULL, 83, '情况属实，同意用车。', '2022-08-02', 10, '同意', '2022-08-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-08-02', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270214', 17, 104, '14', '16', NULL, '1', NULL, 1, '2022-08-02', '2022-08-02', NULL, 112, '同意。', '2022-08-03', 2, '同意。', '2022-08-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-08-02', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270215', NULL, 111, '5', '130', '1648881412346740737', '0', NULL, 4, '2022-08-17', '2022-09-11', NULL, 83, '同意用车。', '2022-08-16', 10, '同意', '2022-08-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-08-16', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270216', 113, NULL, '4', '136', '1648881412384489473', '0', NULL, 4, '2022-08-23', '2022-09-25', NULL, 20, '情况属实。', '2022-08-22', 11, '同意', '2022-08-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-08-22', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270217', 17, 104, '2', '16', NULL, '1', NULL, 1, '2022-08-30', '2022-08-30', NULL, 112, '同意。', '2022-08-30', 2, '同意。', '2022-09-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-08-30', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270218', 94, 111, '2', '132', '1648881412204134402', '0', NULL, 3, '2022-10-03', '2022-10-14', NULL, 83, '情况属实，同意用车。', '2022-09-30', 10, '同意。', '2022-09-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '该项目以测绘工程中心为主导，申请2台生产车辆，川A1081W同行。', NULL, NULL, '2022-09-30', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270219', 72, 111, '6', '136', '1648881412002807809', '0', NULL, 4, '2022-11-04', '2022-11-12', NULL, 61, '情况属实，请安排车辆。', '2022-11-03', 10, '同意。', '2022-11-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-11-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270220', 145, 115, '4', '136', '1648881411944087553', '0', NULL, 2, '2022-11-21', '2023-01-06', NULL, 15, '同意用车', '2022-11-22', 7, NULL, '2022-11-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-11-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270221', 33, 110, '3', '135', '1648881411826647041', '0', NULL, 5, '2022-12-10', '2022-12-18', NULL, 33, '同意', '2022-12-08', 10, '同意。', '2022-12-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-12-08', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270222', 32, 107, '7', '133', '1648881411105226753', '0', NULL, 2, '2023-02-09', '2023-02-12', NULL, 32, '按计划2023年2月9号进场', '2023-02-08', 10, '同意', '2023-02-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-02-08', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270223', 145, 115, '2', '132', '1648881412573233153', '0', NULL, 2, '2023-02-06', '2023-03-25', NULL, 15, '同意', '2023-02-06', 7, '同意', '2023-02-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-02-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270224', NULL, 104, '5', '16', '1648881411159752705', '0', NULL, 2, '2023-02-13', '2023-02-19', NULL, 8, '已派车', '2023-02-13', 2, '同意', '2023-02-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-02-10', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270225', 15, 104, NULL, NULL, '1648881410945843202', '0', NULL, 1, '2023-02-23', '2023-02-23', NULL, 8, '已安排', '2023-03-13', 7, '同意', '2023-04-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '用车已结束', NULL, NULL, '2023-02-22', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270226', 61, 110, '5', '130', '1648881411067478017', '0', NULL, 4, '2023-03-06', '2023-05-17', NULL, 61, '情况属实，建议派车', '2023-03-03', 10, '同意。', '2023-03-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-03-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270227', 55, 109, '7', '133', NULL, '1', NULL, 1, '2023-03-09', '2023-03-13', NULL, 46, '同意。', '2023-03-07', 9, '同意。', '2023-03-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-03-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270228', 35, 107, '7', '16', '1648881411105226753', '0', NULL, 1, '2023-03-16', '2023-03-17', NULL, 32, '同意', '2023-03-16', 10, '同意', '2023-03-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-03-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270229', NULL, 110, '6', '131', '1648881410832596993', '0', NULL, 3, '2023-03-15', '2023-03-24', NULL, NULL, '同意派车', '2023-03-13', 10, '同意。', '2023-03-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '罗友权到新都桥与凌涛交换，由凌涛开川A1081W到叶巴滩，罗友权留到楞古项目。', NULL, NULL, '2023-03-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270230', 32, 107, '3', '135', NULL, '1', NULL, 5, '2023-03-28', '2023-03-28', NULL, 32, '同意', '2023-03-28', 11, '同意', '2023-03-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-03-28', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270231', 33, 107, '4', '136', '1648881410660630529', '0', NULL, 2, '2023-04-04', '2023-04-07', NULL, 32, '同意', '2023-03-31', 10, '同意。', '2023-04-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-03-31', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270232', 32, 107, '4', '136', '1648881411105226753', '0', NULL, 2, '2023-04-11', '2023-04-13', NULL, 32, NULL, '2023-04-11', 10, '同意。', '2023-04-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-04-11', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270233', 22, 105, '1', NULL, NULL, '2', NULL, 4, '2023-04-12', '2023-04-12', NULL, 13, '已核，拟同意。', '2023-04-11', 4, '同意', '2023-04-11', 4, '同意', '2023-04-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-04-11', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270234', 33, 107, '4', '136', '1648881410945843202', '0', NULL, 2, '2023-05-08', '2023-05-19', NULL, 32, '计划5月8号出发', '2023-05-05', 10, '同意。', '2023-05-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-05-05', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270235', 101, 112, '5', '130', '1648881414527778817', '0', NULL, 2, '2023-05-29', '2023-05-30', NULL, 101, '2人至现场，预计周一晚或者周二上午返回成都。', '2023-05-26', 7, '同意', '2023-05-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排入场', NULL, NULL, '2023-05-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270236', 112, NULL, '6', '131', NULL, '1', NULL, 4, '2023-05-30', '2023-05-31', NULL, 112, '情况属实，建议派车。', '2023-05-29', 11, NULL, '2023-05-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-05-29', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270237', 61, 107, '6', '131', '1648881411499491379', '0', NULL, 1, '2023-06-08', '2023-06-18', NULL, 32, '计划6月8号出发', '2023-06-06', 10, '同意。', '2023-06-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-06-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270238', 27, 105, '7', '133', NULL, '1', NULL, 5, '2023-06-19', '2023-06-20', NULL, 20, '情况属实。', '2023-06-15', 7, '同意', '2023-06-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-06-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270239', 83, 111, '5', '130', '1648881412594204674', '0', NULL, 3, '2022-10-17', '2022-11-03', NULL, 83, '情况属实，同意用车。', '2022-10-17', 10, '同意。', '2022-10-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-17', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270240', 83, 111, '2', '16', '1648881412443209730', '0', NULL, 2, '2022-08-16', '2022-08-27', NULL, 83, '同意用车。', '2022-08-15', 11, NULL, '2022-08-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-08-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270241', 83, 111, '1', NULL, '1648881413181407233', '0', NULL, 4, '2022-10-06', '2022-10-06', NULL, 83, '同意现场租用汽车。', '2022-10-06', 10, '同意。', '2022-10-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已经取消', NULL, NULL, '2022-10-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270242', 39, 108, '2', '132', NULL, '1', NULL, 3, '2022-11-08', '2022-11-28', NULL, 39, '生产需求，同意。', '2022-11-07', 9, '同意。', '2022-11-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-11-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270243', NULL, 108, '1', '16', '1648881412040556545', '0', NULL, 3, '2022-11-03', '2022-11-04', NULL, 39, '项目合同签订，同意。', '2022-11-03', 11, '同意', '2022-11-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-11-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270244', 61, 111, '6', '131', '1648881412422238210', '0', NULL, 4, '2022-11-13', '2023-01-07', NULL, 61, '测区路况较差，建议安排越野车。', '2022-11-09', 10, '同意。', '2022-11-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-11-09', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270245', 144, 115, '5', '130', '1648881411868590081', '0', NULL, 2, '2022-11-21', '2022-12-20', NULL, 15, '同意用车', '2022-11-22', 7, '同意', '2022-11-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2022-11-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270246', 94, 111, '5', '130', '1648881411772121090', '0', NULL, 3, '2022-12-28', '2023-01-13', NULL, 83, '情况属实，同意项目用车。', '2022-12-26', 10, '同意', '2022-12-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-12-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270247', 144, 115, '3', '135', '1648881411612737537', '0', NULL, 2, '2022-12-27', '2022-12-28', NULL, 15, '同意', '2023-01-03', 7, '同意', '2023-01-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-12-27', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270248', 21, 105, '2', '132', NULL, '1', NULL, 3, '2023-01-05', '2023-01-06', NULL, 13, '已核。', '2023-01-04', 7, '同意', '2023-01-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-01-04', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270249', 24, 105, '1', '132', '1648881410761293825', '0', NULL, 3, '2023-05-24', '2023-05-25', NULL, 13, '已核，情况属实。', '2023-05-22', 13, '同意。', '2023-05-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-05-22', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270250', 144, 115, '5', '130', '1648881411201695745', '0', NULL, 2, '2023-02-06', '2023-02-26', NULL, 15, '同意，落实出车时间', '2023-02-06', 7, '同意', '2023-02-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，2月8日更换租用车辆川A3K04M', NULL, NULL, '2023-02-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270251', 61, 110, '3', '135', '1648881411373662209', '0', NULL, 1, '2023-02-08', '2023-03-07', NULL, NULL, '收到并确认，注意用车安全', '2023-02-06', 10, '同意。', '2023-02-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-02-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270252', 144, 104, '3', '135', '1648881410660630529', '0', NULL, 2, '2023-04-03', '2023-04-19', NULL, 8, '已安排', '2023-04-06', 10, '同意', '2023-04-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已进场', NULL, NULL, '2023-03-31', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270253', 61, 110, '6', '131', '1648881411067478017', '0', NULL, 2, '2023-03-31', '2023-05-17', NULL, 61, '情况属实，建议派车。', '2023-03-29', 10, '同意。', '2023-03-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-03-29', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270254', 22, 105, NULL, NULL, NULL, '2', NULL, 35, '2023-04-14', '2023-04-14', NULL, 13, '已核，拟同意。', '2023-04-11', 4, '同意', '2023-04-11', 4, '同意', '2023-04-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '由于糖酒会原因，大巴车紧缺，现租用2辆考斯特，租车公司按1辆大巴车费用收取。', NULL, NULL, '2023-04-11', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270255', 32, 107, '4', '136', '1648881410778071042', '0', NULL, 1, '2023-04-13', '2023-04-16', NULL, 32, '同意', '2023-04-18', 10, '同意。', '2023-04-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-04-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270256', 101, 112, '4', '136', '1648881413844107265', '0', NULL, 2, '2023-04-23', '2023-04-27', NULL, 101, '预计3～4天。参与人员：周全、李泳龙。', '2023-04-22', 7, '同意', '2023-04-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-04-23', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270257', 33, 107, '4', '136', '1648881411138781186', '0', NULL, 3, '2023-05-22', '2023-05-29', NULL, 32, '同意', '2023-05-22', 10, '同意。', '2023-05-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-05-20', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270258', 33, 107, '4', '136', '1648881411499491375', '0', NULL, 2, '2023-06-29', '2023-07-07', NULL, 32, '飞行组计划6.29出发', '2023-06-28', 10, '同意。', '2023-06-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-06-28', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270259', 145, 115, '3', '135', NULL, '1', NULL, 3, '2023-06-25', '2023-06-30', NULL, 15, '同意', '2023-06-25', 7, '同意', '2023-06-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排入场', NULL, NULL, '2023-06-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270260', 17, 104, '3', '135', NULL, '1', NULL, 1, '2022-09-29', '2022-09-29', NULL, 112, '同意。', '2022-09-28', 2, '同意。', '2022-09-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-09-28', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270261', 71, 111, NULL, NULL, '1648881413164630018', '0', NULL, 2, '2022-08-27', '2022-08-28', NULL, 83, '同意用车。', '2022-08-26', 10, '同意。', '2022-08-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-08-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270262', 17, 104, '1', '16', NULL, '1', NULL, 1, '2022-10-17', '2022-10-17', NULL, 112, '同意。', '2022-10-13', 2, '同意', '2022-10-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270263', 72, 110, '5', '130', '1648881411499491375', '0', NULL, 2, '2023-07-13', '2023-07-14', NULL, 61, '情况属实，请安排车辆。', '2023-07-12', 10, '同意。', '2023-07-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-07-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270264', 17, 104, '1', '16', NULL, '1', NULL, 1, '2022-10-27', '2022-10-27', NULL, 112, '同意。', '2022-10-31', 2, '同意', '2022-11-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-27', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270265', 15, 104, NULL, NULL, '1648881410962620417', '0', NULL, 3, '2023-03-15', '2023-04-01', NULL, 8, '同意，已安排车辆（租车）', '2023-03-15', 2, '同意', '2023-03-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-03-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270266', 24, 105, '1', '16', NULL, '1', NULL, 3, '2022-12-23', '2022-12-23', NULL, 13, '已核，情况属实。', '2022-12-22', 7, '同意', '2022-12-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-12-22', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270267', 25, 105, '1', '58', NULL, '1', NULL, 3, '2023-01-02', '2023-01-03', NULL, 13, '已阅核，情况属实。', '2022-12-29', 7, '同意', '2022-12-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-12-29', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270268', 39, 108, '3', '135', '1648881410790653953', '0', NULL, 2, '2023-03-13', '2023-03-21', NULL, 39, '尽快确定情况，按要求进场作业。', '2023-03-10', 10, '同意。', '2023-03-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '推迟进场', NULL, NULL, '2023-03-10', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270269', 102, 112, '7', '133', '1648881410761293825', '0', NULL, 2, '2023-03-18', '2023-04-29', NULL, 102, NULL, '2023-03-19', 7, '同意', '2023-03-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-03-19', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270270', 32, 107, '6', '135', NULL, '1', NULL, 4, '2023-03-30', '2023-03-30', NULL, 32, '同意', '2023-03-29', 11, '同意', '2023-03-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-03-29', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270271', 112, NULL, '1', '16', NULL, '1', NULL, 2, '2023-03-30', '2023-03-30', NULL, 112, '情况属实。建议派车。', '2023-03-30', 11, '同意', '2023-03-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-03-30', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270272', NULL, 111, NULL, NULL, '1648881410572550145', '0', NULL, 2, '2023-04-12', '2023-04-12', NULL, 8, '已安排', '2023-04-13', 10, '同意。', '2023-04-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-04-11', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270273', 72, 110, '5', '130', '1648881411499491381', '0', NULL, 2, '2023-07-18', '2023-07-28', NULL, 61, '情况属实，建议派车。', '2023-07-17', 10, '同意。', '2023-07-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-07-17', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270274', NULL, 111, '3', '135', '1648881411373662209', '0', NULL, 1, '2023-04-20', '2023-04-22', NULL, 84, '同意', '2023-04-19', 10, '同意。', '2023-04-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-04-19', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270275', 19, 104, '1', '19', NULL, '4', NULL, 5, '2023-04-28', '2023-04-28', NULL, 8, '情况属实，同意办理', '2023-04-24', 2, '同意', '2023-04-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-04-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270276', 71, 110, NULL, NULL, '1648881410643853314', '0', NULL, 2, '2023-05-16', '2023-06-06', NULL, 61, '情况属实。', '2023-05-15', 10, '同意，车辆状况、费用情况报综合事务部。', '2023-05-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '车辆及驾驶员已由现场负责人落实，已入场工作。', NULL, NULL, '2023-05-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270277', 58, 104, '1', NULL, NULL, '1', NULL, 5, '2023-04-27', '2023-04-27', NULL, 8, '情况属实，同意办理', '2023-04-24', 2, '同意', '2023-04-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '用车已取消', NULL, NULL, '2023-04-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270278', 9, 102, '1', '16', NULL, '1', NULL, 2, '2023-07-06', '2023-07-07', NULL, NULL, NULL, NULL, 2, '同意', '2023-07-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-07-04', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270279', 71, 110, '6', '137', '1648881411499491368', '0', NULL, 2, '2023-07-19', '2023-07-24', NULL, 61, '情况属实，建议派车。', '2023-07-18', 10, '同意。', '2023-07-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-07-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270280', 32, 107, '4', '136', '1648881411499491382', '0', NULL, 2, '2023-07-21', '2023-07-27', NULL, 32, '计划7月21号进场丨0补飞；', '2023-07-20', 10, '同意。', '2023-07-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-07-20', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270281', NULL, 113, '1', '16', '1648881411906338818', '0', NULL, 3, '2023-07-27', '2023-07-27', NULL, NULL, NULL, '2023-07-26', 2, '同意派车', '2023-07-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，由李总（李春生）自驾。', NULL, NULL, '2023-07-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270282', 32, 107, '4', '136', '1648881411499491359', '0', NULL, 2, '2023-08-29', '2023-09-26', NULL, 32, '计划8月29日出发', '2023-08-28', 10, '同意。', '2023-08-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-08-28', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270283', 32, 107, '2', '16', '1648881411499491367', '0', NULL, 1, '2023-08-03', '2023-08-04', NULL, 32, '计划8月3号出发', '2023-08-02', 10, '同意。', '2023-08-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-08-02', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270284', 32, 107, '4', '136', '1648881412204134402', '0', NULL, 2, '2022-10-14', '2022-10-16', NULL, 32, '同意', '2022-10-13', 10, '同意。', '2022-10-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270285', 113, 108, '1', '16', '1648881412384489473', '0', NULL, 1, '2022-10-24', '2022-10-26', NULL, 39, '知晓该事项，没提前声明，后续才知晓用车', '2022-10-30', 9, '同意。', '2022-11-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-25', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270286', 94, 111, NULL, NULL, '1648881412153802753', '0', NULL, 2, '2022-11-05', '2022-11-11', NULL, 83, '情况属实，同意用车。', '2022-11-07', 10, NULL, '2022-11-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-11-04', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270287', 71, 111, NULL, '132', '1648881411885367297', '0', NULL, 1, '2022-12-08', '2022-12-11', NULL, 61, '情况属实，请安排车辆。', '2022-12-09', 10, '同意。', '2022-12-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '租车完成生产项目。', NULL, NULL, '2022-12-08', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270288', 71, 110, '6', '131', '1648881411457548290', '0', NULL, 3, '2023-02-04', '2023-03-13', NULL, NULL, '同意工作需求用车，注意用车安全', '2023-02-03', 10, '同意。', '2023-02-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '川A1686T熊艳华同时入场，已安排', NULL, NULL, '2023-02-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270289', 32, 107, '4', '136', '1648881410694184962', '0', NULL, 3, '2023-03-23', '2023-03-31', NULL, 32, '计划3月23日进场', '2023-03-22', 11, '同意', '2023-03-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-03-22', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270290', 32, 107, '3', '135', '1648881410555772930', '0', NULL, 2, '2023-04-25', '2023-04-26', NULL, 32, '计划4月25号出发', '2023-04-24', 10, '同意。', '2023-04-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-04-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270291', 16, 104, '1', '19', NULL, '1', NULL, 1, '2023-06-19', '2023-06-19', NULL, 8, '按财务部用车需求，建议派车', '2023-06-19', 2, '同意', '2023-06-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-06-19', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270292', 71, 110, '6', '131', '1648881411499491374', '0', NULL, 3, '2023-06-25', '2023-06-29', NULL, 61, '情况属实', '2023-06-21', 10, '同意。', '2023-06-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-06-21', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270293', 16, 104, '1', '14', NULL, '1', NULL, 2, '2023-06-21', '2023-06-22', NULL, 8, '情况属实，建议派车', '2023-06-21', 2, NULL, '2023-07-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已结束行程', NULL, NULL, '2023-06-21', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270294', 61, 110, '3', '135', NULL, '1', NULL, 2, '2023-07-02', '2023-07-05', NULL, 61, '情况属实，建议派车。', '2023-07-01', 10, '同意。', '2023-07-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-07-01', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270295', 71, 110, '5', '130', '1648881411499491365', '0', NULL, 4, '2023-08-20', '2023-11-16', NULL, 61, '情况属实，请安排车辆。', '2023-08-18', 10, '同意。', '2023-08-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-08-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270296', 83, 111, NULL, NULL, '1648881411499491362', '0', NULL, 2, '2023-08-14', '2023-09-01', NULL, 83, '情况属实，同意用车。', '2023-08-14', 10, '同意。', '2023-08-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-08-14', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270297', 61, 110, '3', '135', NULL, '1', NULL, 2, '2023-08-28', '2023-09-07', NULL, 61, '情况属实，请安排车辆。', '2023-08-25', 10, '同意。', '2023-08-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-08-25', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270298', 63, 110, NULL, NULL, '1648881411499491381', '0', NULL, 3, '2023-09-06', '2023-09-06', NULL, 60, '情况属实，建议派车', '2023-09-06', 10, '同意。', '2023-09-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-09-05', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270299', 63, 110, '3', '135', '1648881411499491353', '0', NULL, 2, '2023-09-09', '2023-11-13', NULL, 60, '情况属实，建议派车。', '2023-09-06', 10, '同意。', '2023-09-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，9月26日转到杨为康岗托项目', NULL, NULL, '2023-09-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270300', 33, 107, NULL, NULL, '1648881411499491372', '0', NULL, 2, '2023-09-18', '2023-09-28', NULL, 32, '计划9月18号出发', '2023-09-15', 10, '同意。', '2023-09-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，汤坝，岗托，雅江3个地方。', NULL, NULL, '2023-09-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270301', 61, 110, '2', '16', NULL, '1', NULL, 1, '2023-09-16', '2023-09-16', NULL, 61, '情况属实。', '2023-09-18', 10, '同意', '2023-09-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-09-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270302', 95, 111, NULL, NULL, '1648881411499491351', '0', NULL, 3, '2023-09-21', '2023-09-24', NULL, 83, '同意用车。', '2023-09-28', 10, '同意', '2023-10-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，用车已结束', NULL, NULL, '2023-09-20', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270303', 94, 111, '2', '16', '1648881411499491354', '0', NULL, 4, '2023-10-06', '2023-10-17', NULL, 84, NULL, '2023-09-28', 10, '同意', '2023-10-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-09-28', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270304', 71, 110, NULL, NULL, '1648881410631270438', '0', NULL, 3, '2024-04-15', '2024-06-03', NULL, 61, '情况属实，现场未安排公司车辆。', '2024-04-14', 10, '同意。', '2024-04-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '租车手续完善', NULL, NULL, '2024-04-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270305', 33, 107, NULL, '16', '1648881410631270431', '0', NULL, 2, '2024-02-28', '2024-03-01', NULL, 32, NULL, '2024-02-27', 11, '同意', '2024-02-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-02-27', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270306', 9, 104, '1', NULL, NULL, '1', NULL, 1, '2024-04-26', '2024-04-26', NULL, NULL, NULL, NULL, 2, '同意', '2024-04-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '车已交陈总', NULL, NULL, '2024-04-25', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270307', 19, 104, '4', '136', NULL, '1', NULL, 3, '2024-05-14', '2024-05-17', NULL, 8, '同意\n同意', '2024-05-16', 7, '同意', '2024-05-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '车辆使用了川A1686T、川A2239Q、川A5U91Q。', NULL, NULL, '2024-05-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270308', 60, 110, '2', '147', '1648881411499491341', '0', NULL, 4, '2023-12-26', '2023-12-26', NULL, 60, '情况属实，建议派车。', '2023-12-25', 10, '同意。', '2023-12-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-12-25', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270309', 46, 110, '3', '135', '1648881410631270425', '0', NULL, 2, '2024-01-08', '2024-01-12', NULL, 60, '情况属实，建议派车', '2024-01-08', 10, '同意。', '2024-01-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-01-08', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270310', 18, 104, '1', '16', NULL, '1', NULL, 3, '2024-03-21', '2024-03-21', NULL, 8, '情况属实，同意办理', '2024-03-13', 2, '同意派车', '2024-03-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-03-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270311', 95, 111, '2', '137', '1648881410631270429', '0', NULL, 4, '2024-02-25', '2024-03-13', NULL, 84, '项目用车，情况属实', '2024-02-23', 10, '同意。', '2024-02-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-02-23', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270312', 71, 110, '3', '135', '1648881410631270431', '0', NULL, 3, '2024-02-26', '2024-03-01', NULL, 61, '情况属实', '2024-03-05', 10, '同意。', '2024-03-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，结束行程。', NULL, NULL, '2024-03-04', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270313', 145, 115, '9', '134', NULL, '1', NULL, 3, '2024-03-19', '2024-03-22', NULL, 15, '同意', '2024-03-18', 7, '同意', '2024-03-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-03-19', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270314', 32, 107, '9', '134', '1648881410631270439', '0', NULL, 1, '2024-04-19', '2024-04-20', NULL, 32, NULL, '2024-04-18', 11, '同意', '2024-04-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-04-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270315', 142, 115, '2', '16', NULL, '1', NULL, 3, '2024-04-28', '2024-04-29', NULL, 142, '同意。', '2024-04-25', 7, '同意', '2024-04-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-04-25', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270316', 73, 110, '2', '137', '1648881410631270426', '0', NULL, 1, '2024-05-30', '2024-05-31', NULL, 61, '情况属实，建议派车。', '2024-05-30', 10, '同意。', '2024-05-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-05-30', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270317', 32, 107, '4', '136', '1648881411499491342', '0', NULL, 2, '2023-11-05', '2023-11-16', NULL, 32, '计划11月3号出发', '2023-11-03', 11, NULL, '2023-11-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-11-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270318', 60, 110, '2', '16', '1648881411499491341', '0', NULL, 4, '2023-11-13', '2023-11-24', NULL, 60, '情况属实，建议派车。', '2023-11-10', 10, '同意。', '2023-11-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，11月18日由董云勇驾驶川A9802U到大邑项目', NULL, NULL, '2023-11-10', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270319', 83, 111, NULL, NULL, '1648881411533045762', '0', NULL, 1, '2023-11-13', '2023-11-13', NULL, 83, '同意用车。', '2023-11-12', 10, '同意。', '2023-11-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排入场', NULL, NULL, '2023-11-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270320', 8, 104, '1', '19', NULL, '3', NULL, 3, '2023-11-16', '2023-11-16', NULL, 8, '情况属实，建议派车', '2023-11-14', 2, '同意派车', '2023-11-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-11-14', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270321', 84, 111, '3', '135', '1648881411499491351', '0', NULL, 3, '2024-01-25', '2024-01-26', NULL, 84, '已组织项目参与人员进行了安全、技术交底，严格按照相关要求作业', '2024-01-23', 10, '同意。\n正值降温天气，请项目部、综合事务部做好车辆交通安全管理。', '2024-01-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-01-23', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270322', 32, 107, '1', '16', NULL, '1', NULL, 1, '2024-01-04', '2024-01-04', NULL, 32, '同意', '2024-01-03', 11, '同意', '2024-01-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-01-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270323', 32, 107, '6', '134', '1648881410631270451', '0', NULL, 3, '2024-01-05', '2024-01-13', NULL, 32, '计划1月5号出发点', '2024-01-04', 11, '同意', '2024-01-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-01-04', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270324', 61, 110, '3', '135', '1648881415895121921', '0', NULL, 1, '2024-01-28', '2024-01-30', NULL, 61, '情况属实，建议派车。', '2024-01-26', 10, '同意。', '2024-01-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-01-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270325', 144, 115, '9', '134', '1648881412963303425', '0', NULL, 6, '2024-02-22', '2024-03-13', NULL, 15, '同意', '2024-02-21', 7, '同意', '2024-02-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-02-20', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270326', 22, NULL, '1', '19', NULL, '1', NULL, 3, '2024-03-13', '2024-03-13', NULL, NULL, NULL, NULL, 4, '同意使用', '2024-03-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-03-12', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270327', 61, 110, '3', '135', '1648881411067478017', '0', NULL, 4, '2024-03-12', '2024-04-26', NULL, 61, '情况属实，建议派车。', '2024-03-09', 10, '同意。', '2024-03-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-03-09', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270328', 71, 110, '5', '130', '1648881410631270434', '0', NULL, 3, '2024-03-18', '2024-04-30', NULL, 60, '情况属实，建议派车。', '2024-03-15', 10, '同意。', '2024-03-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-03-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270329', 17, 104, '1', '16', NULL, '1', NULL, 1, '2024-03-18', '2024-03-18', NULL, 8, '同意', '2024-03-18', 2, '同意派车', '2024-03-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-03-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270330', 83, 111, NULL, NULL, '1648881410631270432', '0', NULL, 2, '2024-03-18', '2024-03-26', NULL, 83, '情况属实。', '2024-03-18', 10, '现场加强车辆管理，保证作业安全。', '2024-03-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '请签订用车合同，提供车辆行驶证、驾驶员身份证、驾驶证的复印件，车身照片.', NULL, NULL, '2024-03-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270331', 18, 104, '1', '16', NULL, '1', NULL, 2, '2024-03-27', '2024-03-25', NULL, 8, '情况属实，同意办理', '2024-03-25', 2, '同意拨付', '2024-04-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2024-03-25', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270332', 17, 104, '1', '16', NULL, '1', NULL, 1, '2024-03-26', '2024-03-26', NULL, 8, '情况属实，同意办理', '2024-03-25', 2, '同意', '2024-04-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2024-03-25', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270333', 113, NULL, '2', '16', '1648881419607080962', '0', NULL, 1, '2024-04-09', '2024-04-10', NULL, 59, '同意。', '2024-04-07', 11, '同意', '2024-04-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-04-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270334', 8, 104, NULL, NULL, NULL, '3', NULL, 23, '2024-04-16', '2024-04-16', NULL, 8, '情况属实，建议租车公司租车！', '2024-04-15', 2, '同意', '2024-04-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-04-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270335', 112, 112, '1', '137', '1648881410631270460', '0', NULL, 2, '2024-04-22', '2024-04-22', NULL, 101, '情况属实', '2024-04-22', 7, '同意', '2024-04-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-04-21', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270336', 145, 115, '3', '135', NULL, '1', NULL, 2, '2024-04-28', '2024-04-30', NULL, 15, '同意', '2024-04-28', 7, '同意', '2024-04-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-04-27', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270337', 32, 107, '4', '136', NULL, '1', NULL, 4, '2024-05-26', '2024-05-27', NULL, 32, NULL, '2024-05-24', 11, '同意', '2024-05-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-05-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270338', 33, 107, '4', '136', NULL, '1', NULL, 2, '2024-06-05', '2024-06-05', NULL, 32, '同意', '2024-06-05', 11, '同意', '2024-06-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-06-05', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270339', 94, 111, '4', '136', '1648881410631270449', '0', NULL, 3, '2024-06-08', '2024-06-22', NULL, 83, '情况属实，同意用车。', '2024-06-06', 10, '同意。', '2024-06-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-06-05', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270340', 59, NULL, '2', '19', NULL, '2', NULL, 3, '2024-06-18', '2024-06-18', NULL, 59, '同意。', '2024-06-18', 7, '同意', '2024-06-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-06-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270341', 84, 111, '6', '147', '1648881411499491384', '0', NULL, 2, '2023-11-13', '2023-11-17', NULL, 84, NULL, '2023-11-10', 10, '同意', '2023-11-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-11-10', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270342', 63, 110, '3', '135', '1648881410631270426', '0', NULL, 2, '2024-01-15', '2024-01-18', NULL, 61, '情况属实，建议派车。', '2024-01-12', 10, '同意。', '2024-01-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-01-12', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270343', 33, 107, '2', '137', '1648881410631270452', '0', NULL, 2, '2024-01-17', '2024-02-04', NULL, 32, '计划1.17出发', '2024-01-16', 11, '同意', '2024-01-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-01-16', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270344', 103, 112, '9', '134', '1648881410761293825', '0', NULL, 2, '2024-01-22', '2024-02-02', NULL, 102, '盐源测量标志普查，起算点检校，需大车，拉3米水准尺。', '2024-01-20', 7, '同意', '2024-01-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-01-20', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270345', 32, 107, '4', '136', '1648881410631270439', '0', NULL, 2, '2024-04-10', '2024-04-28', NULL, 32, '飞行组计划4月10号出发', '2024-04-09', 11, NULL, '2024-04-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-04-09', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270346', 145, 115, NULL, NULL, '1648881410631270466', '0', NULL, 5, '2024-06-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2024-06-20', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270347', 10, 102, '1', '16', NULL, '1', NULL, 3, '2024-05-30', '2024-05-31', NULL, NULL, NULL, NULL, 2, '同意派车。', '2024-05-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-05-29', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270348', 21, 105, '1', NULL, NULL, '1', NULL, 2, '2023-10-25', '2023-10-25', NULL, 13, '情况属实 同意用车申请', '2023-10-24', 7, '同意', '2023-10-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，由陈洪（总）自驾前往。', NULL, NULL, '2023-10-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270349', 60, 110, '6', '147', '1648881411499491341', '0', NULL, 5, '2023-11-07', '2023-11-07', NULL, 60, '情况属实，建议派车。', '2023-11-06', 10, '同意。', '2023-11-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-11-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270350', 71, 110, '6', '137', '1648881411499491339', '0', NULL, 2, '2023-11-26', '2024-01-13', NULL, 61, NULL, '2023-11-24', 10, '同意。', '2023-11-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，注:12月29日川A1081W换回川A9802U，现场由赵永来驾驶。', NULL, NULL, '2023-11-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270351', 63, 110, '3', '135', '1648881411499491381', '0', NULL, 1, '2023-11-24', '2023-11-25', NULL, 60, '情况属实，建议派车。', '2023-11-27', 10, '同意。', '2023-11-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，行程已结束', NULL, NULL, '2023-11-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270352', 84, 111, NULL, NULL, '1648881411499491332', '0', NULL, 1, '2023-12-09', '2023-12-16', NULL, 84, NULL, '2023-12-07', 10, '同意。', '2023-12-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-12-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270353', 72, 110, '3', '135', '1648881411499491379', '0', NULL, 3, '2023-11-29', '2023-12-03', NULL, 61, NULL, '2023-11-28', 10, '同意。', '2023-11-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-11-28', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270354', 9, 102, '2', NULL, NULL, '1', NULL, 2, '2023-11-28', '2023-11-29', NULL, NULL, NULL, NULL, 2, '同意', '2023-11-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-11-29', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270355', 33, 107, '4', '136', '1648881411499491372', '0', NULL, 3, '2024-01-04', '2024-01-12', NULL, 33, '情况属实', '2024-01-03', 11, '同意', '2024-01-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-01-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270356', 72, 110, '5', '130', '1648881410631270452', '0', NULL, 3, '2024-01-15', '2024-02-04', NULL, 61, '情况属实，建议派车。', '2024-01-12', 10, '同意。', '2024-01-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-01-12', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270357', 80, NULL, '6', '134', '1648881412329963522', '0', NULL, 1, '2024-01-15', '2024-01-17', NULL, 112, '情况属实。', '2024-01-15', 11, '同意', '2024-01-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-01-14', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270358', 84, 111, '6', '132', '1648881410631270427', '0', NULL, 1, '2024-01-29', '2024-01-29', NULL, 84, '同意', '2024-01-26', 10, '同意。', '2024-01-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-01-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270359', 32, 107, '4', '136', '1648881410631270451', '0', NULL, 1, '2024-03-19', '2024-03-23', NULL, 32, '计划3月19号出发', '2024-03-18', 11, '同意', '2024-03-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-03-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270360', 22, NULL, NULL, NULL, NULL, '1', NULL, 45, '2024-03-20', '2024-03-20', NULL, NULL, NULL, NULL, 4, '同意使用', '2024-03-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-03-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270361', 17, 104, '1', '16', NULL, '1', NULL, 1, '2024-04-03', '2024-04-03', NULL, 8, '情况属实，同意办理', '2024-04-07', 2, '同意派车', '2024-04-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2024-04-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270362', 8, 104, '1', '19', NULL, '3', NULL, 1, '2024-04-10', '2024-04-10', NULL, 8, '情况属实，同意办理', '2024-04-07', 2, '同意派车', '2024-04-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2024-04-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270363', 9, 104, '1', NULL, NULL, '1', NULL, 1, '2024-04-25', '2024-04-26', NULL, NULL, NULL, NULL, 2, '同意', '2024-04-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '车已交给陈总', NULL, NULL, '2024-04-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270364', 32, 107, '2', '137', '1648881410631270444', '0', NULL, 2, '2024-05-06', '2024-05-22', NULL, 32, '同意', '2024-05-06', 11, '同意', '2024-05-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-05-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270365', 72, 110, '5', '130', '1648881410631270463', '0', NULL, 2, '2024-05-13', '2024-06-17', NULL, 61, '情况属实', '2024-05-11', 10, '同意。', '2024-05-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-05-11', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270366', 17, 104, '1', '16', NULL, '1', NULL, 1, '2024-05-24', '2024-05-24', NULL, 8, '同意', '2024-05-27', 14, NULL, '2024-06-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，已结束', NULL, NULL, '2024-05-24', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270367', 32, 107, '4', '136', '1648881410631270417', '0', NULL, 2, '2023-10-22', '2023-11-11', NULL, 32, '计划22号出发，需要长城炮', '2023-10-21', 11, NULL, '2023-10-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排进场，同时川A1081W陈建贤驾驶23日进场。', NULL, NULL, '2023-10-21', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270368', 94, 111, NULL, '137', '1648881411499491342', '0', NULL, 4, '2023-11-06', '2023-11-22', NULL, 84, '情况属实', '2023-11-02', 10, '同意', '2023-11-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-11-02', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270369', 58, 104, '1', '58', NULL, '1', NULL, 2, '2023-11-07', '2023-11-08', NULL, 8, '情况属实，建议用车', '2023-11-06', 2, '同意派车', '2023-11-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排，用车人自驾，未用车。', NULL, NULL, '2023-11-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270370', 112, NULL, '4', '136', '1648881411138781189', '0', NULL, 2, '2023-12-27', '2023-12-28', NULL, 112, '情况属实。', '2023-12-26', 11, '同意', '2023-12-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-12-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270371', 32, 107, '4', '136', NULL, '1', NULL, 1, '2023-11-21', '2023-12-26', NULL, 32, '需要长城炮，跟车一人', '2023-11-20', 11, '同意', '2023-11-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-11-20', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270372', 58, 104, '1', '58', NULL, '1', NULL, 2, '2023-12-18', '2023-12-18', NULL, 8, '情况属实 建议派车', '2023-12-17', 2, '同意', '2023-12-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-12-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270373', 71, 110, '2', '16', '1648881410631270423', '0', NULL, 3, '2024-01-02', '2023-12-28', NULL, 61, '建议派越野车前往', '2023-12-26', 11, '同意', '2023-12-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已取消了', NULL, NULL, '2023-12-26', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270374', 83, 111, '4', '136', '1648881410631270433', '0', NULL, 2, '2024-03-14', '2024-03-17', NULL, 83, '情况属实。', '2024-03-13', 10, '同意。', '2024-03-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-03-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270375', 71, 110, '2', '137', '1648881410631270435', '0', NULL, 3, '2024-03-20', '2024-03-31', NULL, 60, '项目生产，建议派车。', '2024-03-19', 10, '同意。', '2024-03-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-03-19', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270376', 33, 107, '4', '136', '1648881410631270435', '0', NULL, 2, '2024-03-24', '2024-04-03', NULL, 32, NULL, '2024-03-25', 11, '同意', '2024-03-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排入场', NULL, NULL, '2024-03-22', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270377', 94, 111, '9', '134', '1648881410631270437', '0', NULL, 3, '2024-04-01', '2024-04-09', NULL, 83, '情况属实。', '2024-03-29', 10, '同意。', '2024-03-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-03-29', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270378', 41, 115, '1', '19', NULL, '1', NULL, 4, '2024-04-19', '2024-04-19', NULL, 15, '同意', '2024-04-18', 2, '同意', '2024-04-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-04-17', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270379', 145, 115, '2', '16', '1648881411499491384', '0', NULL, 2, '2024-04-24', '2024-04-26', NULL, 15, '同意', '2024-04-28', 7, '同意', '2024-04-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '行程已安排，已结束。', NULL, NULL, '2024-04-23', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270380', 33, 107, '4', '136', '1648881410631270443', '0', NULL, 2, '2024-05-04', '2024-05-11', NULL, 32, '同意', '2024-05-01', 11, NULL, '2024-05-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排入场', NULL, NULL, '2024-04-30', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270381', 63, 110, '3', '135', '1648881410631270445', '0', NULL, 2, '2024-05-20', '2024-06-05', NULL, 61, '情况属实，建议派车。', '2024-05-17', 10, '同意。', '2024-05-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-05-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270382', 15, 115, '2', '135', '1648881412384489473', '0', NULL, 1, '2023-08-16', '2023-08-17', NULL, 15, '同意', '2023-08-15', 7, '同意', '2023-08-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-08-15', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270383', 46, 109, '2', '135', NULL, '1', NULL, 2, '2023-08-23', '2023-08-27', NULL, 46, '情况属实。', '2023-08-22', 9, '同意。', '2023-08-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-08-22', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270384', 39, 108, '1', '147', NULL, '1', NULL, 2, '2023-10-31', '2023-10-31', NULL, 39, '前期对接沟通，申请用车。', '2023-10-31', 9, '同意。', '2023-10-31', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-10-31', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270385', 32, 107, '6', '147', '1648881411499491341', '0', NULL, 2, '2023-11-07', '2023-11-07', NULL, 32, NULL, '2023-11-06', 11, '同意', '2023-11-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-11-07', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270386', 32, 107, '3', '135', '1648881411499491339', '0', NULL, 4, '2023-11-14', '2023-11-21', NULL, 32, '计划11月14号出发', '2023-11-13', 11, '同意', '2023-11-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-11-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270387', 103, 112, '3', '135', '1648881410631270422', '0', NULL, 3, '2023-12-04', '2024-01-01', NULL, 101, '同意', '2023-11-30', 10, '同意', '2023-11-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-11-30', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270388', 60, 110, NULL, NULL, '1648881411499491334', '0', NULL, 3, '2023-12-03', '2024-01-07', NULL, 60, '建议派车', '2023-12-03', 10, '同意。', '2023-12-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-12-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270389', 8, 104, '1', '16', NULL, '1', NULL, 3, '2024-01-03', '2024-01-03', NULL, 8, '情况属实，建议派车！', '2024-01-03', 2, '同意', '2024-01-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-01-03', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270390', 32, 107, '4', '136', '1648881410631270428', '0', NULL, 3, '2024-01-18', '2024-01-28', NULL, 32, '计划与1月18号出发', '2024-01-18', 11, '同意', '2024-01-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排进场', NULL, NULL, '2024-01-18', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270391', 76, 110, '4', '136', '1648881410631270430', '0', NULL, 2, '2024-02-28', '2024-03-02', NULL, 61, '情况属实，建议派车。', '2024-02-29', 10, '同意', '2024-03-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排进场了', NULL, NULL, '2024-02-27', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270392', 17, 104, '1', '16', NULL, '1', NULL, 1, '2024-03-07', '2024-03-07', NULL, 8, '同意', '2024-03-06', 2, '同意', '2024-03-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-03-06', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270393', 83, 111, '1', '16', NULL, '1', NULL, 1, '2024-04-01', '2024-04-01', NULL, 83, '情况属实。', '2024-03-31', 10, '同意。', '2024-04-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-04-01', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270394', 33, 107, '9', '134', '1648881410631270441', '0', NULL, 2, '2024-04-24', '2024-04-28', NULL, 32, '同意', '2024-04-23', 11, NULL, '2024-04-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-04-23', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270395', 145, 115, '2', '137', '1648881411499491382', '0', NULL, 4, '2024-04-15', '2024-04-18', NULL, 15, '同意', '2024-04-12', 7, '同意', '2024-04-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-04-11', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270396', 81, NULL, '1', '136', NULL, '1', NULL, 2, '2024-05-13', '2024-05-13', NULL, 59, '同意。', '2024-05-13', 11, '同意', '2024-05-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-05-13', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270397', 39, 108, '3', '135', '1648881419619663874', '0', NULL, 3, '2024-05-17', '2024-05-17', NULL, 39, '开项目验收评审会，申请派车。', '2024-05-16', 9, '同意。', '2024-05-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-05-16', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270398', 71, 110, '9', '134', '1648881410631270465', '0', NULL, 3, '2024-06-20', NULL, NULL, 61, '情况属实，建议派车。', '2024-06-19', 10, '同意。', '2024-06-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排\n熊艳华驾驶川A1686T于6月22日进场', NULL, NULL, '2024-06-19', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270399', 84, 111, '5', '130', '1648881410631270450', '0', NULL, 2, '2024-06-21', NULL, NULL, 84, NULL, '2024-06-20', 10, '同意。', '2024-06-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-06-20', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270400', 19, 104, '1', '19', NULL, '1', NULL, 2, '2023-10-27', '2023-10-27', NULL, 8, '情况属实，建议派车', '2023-10-27', 2, '同意。', '2023-11-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '行程已结束', NULL, NULL, '2023-10-27', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270401', 61, 110, '5', '130', '1648881411067478017', '0', NULL, 3, '2023-11-20', '2024-01-13', NULL, 61, '情况属实，建议派车', '2023-11-17', 10, '同意', '2023-11-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2023-11-17', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270402', 84, 111, '4', '16', '1648881410631270426', '0', NULL, 2, '2024-01-17', '2024-01-17', NULL, 84, NULL, '2024-01-16', 10, '同意。', '2024-01-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-01-16', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270403', 32, 107, '4', '136', NULL, '1', NULL, 4, '2024-02-21', '2024-02-21', NULL, 32, '部门实操训练', '2024-02-19', 11, '同意', '2024-02-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-02-19', NULL, NULL);
INSERT INTO `cmc_car_approval` VALUES ('1648881410631270404', 35, 107, '5', '130', '1648881410631270451', '0', NULL, 2, '2024-02-28', '2024-03-13', NULL, 32, '计划2月28号出发', '2024-02-27', 11, '同意', '2024-02-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '已安排', NULL, NULL, '2024-02-27', NULL, NULL);

-- ----------------------------
-- 27、cmc设备信息表
-- ----------------------------
drop table if exists `cmc_device`;
create table `cmc_device`  (
  `device_id`			int					not null auto_increment		comment '设备id',
  `device_number`		varchar(10)			default null				comment '设备编码',
  `code`				varchar(200)		default null				comment '出厂编号',
  `name`				varchar(20)			default null				comment '设备名称',
  `type`				varchar(10)			default null				comment '设备类别',
  `acquisition_time`	date				default null				comment '购置时间',
  `cost`				decimal(10,2)		default null				comment '购买价格',
  `expect_life`			int					default null				comment '预计使用年限',
  `series`				varchar(200)		default null				comment '规格型号',
  `brand`				varchar(20)			default null				comment '设备品牌',
  `day_cost`			decimal(10,2)		default null				comment '单日成本',
  `place`				varchar(50)			default null				comment '存放地点',
  `remark`				varchar(255)		default null				comment '备注',
  `manage_dept`			bigint				default null				comment '管理部门',
  `status`				char(1)				default null				comment '状态',
  primary key (`device_id`)
) engine = innodb comment = 'cmc设备信息表';

-- ----------------------------
-- 初始化-设备信息表数据
-- ----------------------------
INSERT INTO `cmc_device` VALUES (1, '001', '364696', '全站仪', '仪器设备', '2015-04-01', 333800.00, 8, 'TM30 0.5\"R1000', '徕卡', 15.00, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (2, '002', '242572', '全站仪', '仪器设备', NULL, 0.00, 8, 'TCRP1201+R400', '徕卡', 15.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (3, '003', '363119', '全站仪', '仪器设备', '2012-03-26', 353000.00, 8, 'TM30 0.5\"', '徕卡', 15.00, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (4, '004', '369141', '全站仪', '仪器设备', '2019-10-12', 280000.00, 8, 'TM50 0.5\"', '徕卡', 15.00, 'C204', '2022.11.13-2022.11.18用于科博会展览', 104, '1');
INSERT INTO `cmc_device` VALUES (5, '005', '438516', '全站仪', '仪器设备', NULL, 393000.00, 8, 'TCA2003  0.5\"', '徕卡', 15.00, 'C204', '设备停用，电池坏', 104, '3');
INSERT INTO `cmc_device` VALUES (6, '006', '7X0126', '全站仪', '仪器设备', '2008-07-01', 128000.00, 8, 'GPT-7502', '拓普康', 15.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (7, '007', '7X1038', '全站仪', '仪器设备', '2008-07-01', 128000.00, 8, 'GPT-7502', '拓普康', 15.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (8, '008', 'OP1454', '全站仪', '仪器设备', '2006-01-01', 0.00, 8, 'GTS-332N', '拓普康', 15.00, 'C204', '无免棱镜', 104, '1');
INSERT INTO `cmc_device` VALUES (9, '009', '4K0317', '全站仪', '仪器设备', NULL, 0.00, 8, 'GPT-3002LN', '拓普康', 15.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (10, '010', '4K0778', '全站仪', '仪器设备', NULL, 0.00, 8, 'GPT-3002LN', '拓普康', 15.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (11, '011', '4K0144', '全站仪', '仪器设备', NULL, 0.00, 8, 'GPT-3002LN', '拓普康', 15.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (12, '012', '4K2760', '全站仪', '仪器设备', NULL, 0.00, 8, 'GPT-3002LN', '拓普康', 15.00, 'C204', '测距的时候出现错误代码E69，于2022年10月31日交星辰测绘公司维修，查明是电池的原因导致，于2022年11月4日送回', 104, '1');
INSERT INTO `cmc_device` VALUES (13, '013', '4K2365', '全站仪', '仪器设备', NULL, 0.00, 8, 'GPT-3002LN', '拓普康', 15.00, '金川测量中心', '2022.08.09送检，2022.08.24取回公司', 104, '1');
INSERT INTO `cmc_device` VALUES (14, '014', '4K2380', '全站仪', '仪器设备', NULL, 0.00, 8, 'GPT-3002LN', '拓普康', 15.00, '双江口测量中心', '', 104, '1');
INSERT INTO `cmc_device` VALUES (15, '015', 'AP0071', '全站仪', '仪器设备', NULL, 69000.00, 8, 'GPT-3002LNC', '拓普康', 15.00, '两河口测量中心', '', 104, '1');
INSERT INTO `cmc_device` VALUES (16, '016', 'AP0064', '全站仪', '仪器设备', NULL, 69000.00, 8, 'GPT-3002LNC', '拓普康', 15.00, 'C204', '免棱镜', 104, '1');
INSERT INTO `cmc_device` VALUES (17, '017', 'XJ1042', '全站仪', '仪器设备', NULL, 0.00, 8, 'GTS-332', '拓普康', 15.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (18, '018', 'AP0035', '全站仪', '仪器设备', NULL, 0.00, 8, 'GPT-3002LNC', '拓普康', 15.00, 'C204', '2022.12.22二滩项目还回送星辰维修，仪器在项目上摔过，问题1：正倒镜距离偏差较大；问题2：目镜有遮挡物；问题3：竖盘指标差明显变大。', 104, '1');
INSERT INTO `cmc_device` VALUES (19, '019', '4K2768', '全站仪', '仪器设备', NULL, 0.00, 8, 'GPT-3002LN', '拓普康', 15.00, '巴拉测量中心', '', 104, '1');
INSERT INTO `cmc_device` VALUES (20, '020', '4K2051', '全站仪', '仪器设备', NULL, 0.00, 8, 'GPT-3002LN', '拓普康', 15.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (21, '021', 'XL0461', '全站仪', '仪器设备', NULL, 0.00, 8, 'GTS-335', '拓普康', 15.00, 'C204', '设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (22, '022', 'XL1614', '全站仪', '仪器设备', NULL, 0.00, 8, 'GTS-335', '拓普康', 15.00, 'C204', '设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (23, '023', 'KQ0408', '全站仪', '仪器设备', NULL, 0.00, 8, 'GTS-335W', '拓普康', 15.00, 'C204', '设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (24, '024', '5B0214', '全站仪', '仪器设备', NULL, 0.00, 8, 'GTS-335N', '拓普康', 15.00, 'C204', '设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (25, '025', '5B0208', '全站仪', '仪器设备', NULL, 0.00, 8, 'GTS-335N', '拓普康', 15.00, 'C204', '设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (26, '026', '2N1574', '全站仪', '仪器设备', NULL, 0.00, 8, 'GTS-102N', '拓普康', 15.00, 'C204', '设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (27, '027', '4M0255', '全站仪', '仪器设备', NULL, 0.00, 8, 'GPT-3005LN', '拓普康', 15.00, 'C204', '免棱镜', 104, '3');
INSERT INTO `cmc_device` VALUES (28, '028', '4M0174', '全站仪', '仪器设备', NULL, 0.00, 8, 'GPT-3005LN/OP', '拓普康', 15.00, 'C204', '免棱镜', 104, '3');
INSERT INTO `cmc_device` VALUES (29, '029', '4M0179', '全站仪', '仪器设备', NULL, 0.00, 8, 'GPT-3005LN/OP', '拓普康', 15.00, 'C204', '设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (30, '030', '4M1731', '全站仪', '仪器设备', NULL, 0.00, 8, 'GPT-3005/LN', '拓普康', 15.00, 'C204', '设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (31, '031', 'ZQ007616', '全站仪', '仪器设备', '2020-05-10', 49000.00, 8, 'GM-102', '拓普康', 15.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (32, '032', 'ZQ007600', '全站仪', '仪器设备', '2020-05-10', 49000.00, 8, 'GM-102', '拓普康', 15.00, '巴拉测量中心', '', 104, '1');
INSERT INTO `cmc_device` VALUES (33, '033', '4M2584', '全站仪', '仪器设备', NULL, 0.00, 8, 'GPT-3005LN', '拓普康', 15.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (34, '034', 'CF0727', '全站仪', '仪器设备', '2019-05-10', 61440.00, 8, 'FX-102', '索佳', 15.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (35, '035', '2P6437', '全站仪', '仪器设备', '2021-09-26', 0.00, 8, 'GTS-102N', '拓普康', 15.00, 'C314', '无免棱镜', 104, '1');
INSERT INTO `cmc_device` VALUES (36, '036', '0220414597', 'GPS接收机', '仪器设备', NULL, 0.00, 8, '天宝5700', '天宝', NULL, 'C204', '设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (37, '037', '0220412233', 'GPS接收机', '仪器设备', NULL, 0.00, 8, '天宝5700', '天宝', NULL, 'C204', '设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (38, '038', '0220414589', 'GPS接收机', '仪器设备', NULL, 0.00, 8, '天宝5700', '天宝', NULL, 'C204', '电池卡槽松动，设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (39, '039', '0220384703', 'GPS接收机', '仪器设备', NULL, 0.00, 8, '天宝5700', '天宝', NULL, 'C204', '设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (40, '040', '0220403484', 'GPS接收机', '仪器设备', NULL, 0.00, 8, '天宝5700', '天宝', NULL, 'C204', '设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (41, '041', '4838158462', 'GPS接收机', '仪器设备', NULL, 0.00, 8, '天宝5700', '天宝', NULL, 'C204', '电瓶备注“坏”，设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (42, '042', '4913169195', 'GPS接收机', '仪器设备', NULL, 0.00, 8, '天宝5700', '天宝', NULL, 'C204', '设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (43, '043', '4838158505', 'GPS接收机', '仪器设备', NULL, 0.00, 8, '天宝5700', '天宝', NULL, 'C204', '设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (44, '043-1', '4852162793', 'GPS接收机', '仪器设备', NULL, 0.00, 8, '天宝5700', '天宝', NULL, 'C204', '设备停用', 104, '3');
INSERT INTO `cmc_device` VALUES (45, '044', 'SG6063117172467WHS', 'GNSS接收机', '仪器设备', '2016-03-01', 34000.00, 8, '银河6', '南方', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (46, '045', 'SG6062117168894WHS', 'GNSS接收机', '仪器设备', '2016-03-01', 34000.00, 8, '银河6', '南方', 5.30, 'C204', '缺充电器', 104, '1');
INSERT INTO `cmc_device` VALUES (47, '046', 'SG6063117172454WHS', 'GNSS接收机', '仪器设备', '2016-03-01', 34000.00, 8, '银河6', '南方', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (48, '047', 'SG6062117171265WHS', 'GNSS接收机', '仪器设备', '2016-03-01', 34000.00, 8, '银河6', '南方', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (49, '048', 'S86247117113072GM', 'GPS接收机', '仪器设备', '2014-08-01', 0.00, 8, 'S86', '南方', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (50, '049', 'S86247117111089GM', 'GPS接收机', '仪器设备', '2014-08-01', 0.00, 8, 'S86', '南方', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (51, '050', 'S86247117113054GM', 'GPS接收机', '仪器设备', '2014-08-01', 0.00, 8, 'S86', '南方', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (52, '051', 'S86247117113081GM', 'GPS接收机', '仪器设备', '2014-08-01', 0.00, 8, 'S86', '南方', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (53, '052', 'S86247117109955GM', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'S86', '南方', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (54, '053', 'S86248117114945GM', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'S86', '南方', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (55, '054', 'S86247117113068GM', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'S86', '南方', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (56, '055', 'S86247117113071GM', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'S86', '南方', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (57, '056', 'S86248117090463GM', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'S86', '南方', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (58, '057', 'S86247117110525GM', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'S86', '南方', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (59, '058', 'S86247117113102GM', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'S86', '南方', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (60, '059', 'S86247117113112GM', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'S86', '南方', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (61, '060', 'VA11604269', 'GNSS接收机', '仪器设备', NULL, 0.00, 8, 'V90', '中海达', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (62, '061', 'VBTH15191085', 'GNSS接收机', '仪器设备', '2023-02-21', 10500.00, 8, 'vRTK Plus', '海星达', 5.30, 'C204', '2023年02月20日由已报废的V90 VA11604458置换', 104, '1');
INSERT INTO `cmc_device` VALUES (63, '062', 'VBTH15191017', 'GNSS接收机', '仪器设备', '2023-02-21', 10500.00, 8, 'vRTK Plus', '海星达', 5.30, 'C204', '2023年02月21日由已报废的V90 VA11604207置换', 104, '1');
INSERT INTO `cmc_device` VALUES (64, '063', 'VA11604309', 'GNSS接收机', '仪器设备', NULL, 0.00, 8, 'V90', '中海达', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (65, '064', 'VA11604411', 'GNSS接收机', '仪器设备', NULL, 0.00, 8, 'V90', '中海达', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (66, '065', 'VA11604338', 'GNSS接收机', '仪器设备', NULL, 0.00, 8, 'V90', '中海达', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (67, '066', 'VA11006257', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V60', '中海达', NULL, '双江口测量中心', '', 104, '1');
INSERT INTO `cmc_device` VALUES (68, '067', 'VA11001492', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V60', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (69, '068', 'VA11001517', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V60', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (70, '069', 'VA11003048', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V60', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (71, '070', 'VA11001076', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V60', '中海达', NULL, '双江口测量中心', '', 104, '1');
INSERT INTO `cmc_device` VALUES (72, '071', 'VA10203371', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V30', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (73, '072', 'VA10203814', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V30', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (74, '073', 'VA10211383', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V30', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (75, '074', 'VA10211519', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V30', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (76, '075', 'VA10211349', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V30', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (77, '076', 'VA10208075', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V30', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (78, '077', 'VA10207828', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V30', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (79, '078', 'VA10223371', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V30', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (80, '079', 'VA10207859', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V30', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (81, '080', 'VA10224308', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V30', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (82, '081', 'VA10204340', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V30', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (83, '082', 'VA10203811', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V30', '中海达', NULL, 'C204', '该设备导不出数据', 104, '1');
INSERT INTO `cmc_device` VALUES (84, '083', 'VA10203926', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V30', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (85, '084', 'VBTH15191062', 'GNSS接收机', '仪器设备', '2023-02-09', 10500.00, 8, 'vRTK Plus', '海星达', 5.30, 'C204', '2023.02.09由2820650置换', 104, '1');
INSERT INTO `cmc_device` VALUES (86, '085', 'VATC13804219', 'GNSS接收机', '仪器设备', '2022-06-01', 11500.00, 8, 'iRTK10', '海星达', 5.30, 'C204', '2022.6.1购买，由1823851以旧换新', 104, '1');
INSERT INTO `cmc_device` VALUES (87, '086', 'VATA13799265', 'GNSS接收机', '仪器设备', '2022-06-01', 11500.00, 8, 'iRTK10', '海星达', 5.30, 'C204', '2022.6.1购买，由2802768以旧换新', 104, '1');
INSERT INTO `cmc_device` VALUES (88, '087', 'VATA13799211', 'GNSS接收机', '仪器设备', '2022-06-01', 11500.00, 8, 'iRTK10', '海星达', 5.30, 'C204', '2022.6.1购买，由2802760以旧换新', 104, '1');
INSERT INTO `cmc_device` VALUES (89, '088', 'VBTH15191110', 'GNSS接收机', '仪器设备', '2023-02-09', 10500.00, 8, 'vRTK Plus', '海星达', 5.30, 'C204', '2023.02.09由1823709置换', 104, '1');
INSERT INTO `cmc_device` VALUES (90, '089', 'VBTG15189708', 'GNSS接收机', '仪器设备', '2023-02-09', 10500.00, 8, 'vRTK Plus', '海星达', 5.30, 'C204', '2023.02.09由10101387置换', 104, '1');
INSERT INTO `cmc_device` VALUES (91, '090', 'VBTH15191013', 'GNSS接收机', '仪器设备', '2023-02-09', 10500.00, 8, 'vRTK Plus', '海星达', 5.30, '金川测量中心', '2023.02.09由10100876置换', 104, '1');
INSERT INTO `cmc_device` VALUES (92, '091', 'VBTH15191020', 'GNSS接收机', '仪器设备', '2023-02-09', 10500.00, 8, 'vRTK Plus', '海星达', 5.30, 'C204', '2023.02.09由10101307置换', 104, '1');
INSERT INTO `cmc_device` VALUES (93, '092', 'VBTH15191064', 'GNSS接收机', '仪器设备', '2023-02-09', 10500.00, 8, 'vRTK Plus', '海星达', 5.30, 'C204', '2023.02.09由10100667置换', 104, '1');
INSERT INTO `cmc_device` VALUES (94, '093', 'VBTH15191069', 'GNSS接收机', '仪器设备', '2023-02-09', 10500.00, 8, 'vRTK Plus', '海星达', 5.30, 'C204', '2023.02.09由10100009置换', 104, '1');
INSERT INTO `cmc_device` VALUES (95, '094', 'VBTH15191075', 'GNSS接收机', '仪器设备', '2023-02-09', 10500.00, 8, 'vRTK Plus', '海星达', 5.30, 'C204', '2023.02.09由10100112置换', 104, '1');
INSERT INTO `cmc_device` VALUES (96, '095', 'VBTH15191083', 'GNSS接收机', '仪器设备', '2023-02-09', 10500.00, 8, 'vRTK Plus', '海星达', 5.30, 'C204', '2023.02.09由10100027置换', 104, '1');
INSERT INTO `cmc_device` VALUES (97, '096', 'VBTH15191096', 'GNSS接收机', '仪器设备', '2023-02-09', 10500.00, 8, 'vRTK Plus', '海星达', 5.30, 'C204', '2023.02.09由10100130置换', 104, '1');
INSERT INTO `cmc_device` VALUES (98, '097', '3296510', 'GNSS接收机', '仪器设备', '2020-03-01', 0.00, 8, 'i90', '华测', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (99, '098', '3284700', 'GNSS接收机', '仪器设备', '2020-03-01', 0.00, 8, 'i90', '华测', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (100, '099', '3231486', 'GNSS接收机', '仪器设备', '2020-03-01', 0.00, 8, 'i90', '华测', 5.30, 'C204', '电池卡槽松，不易识别电池，要垫上纸片才能工作，不稳定。于2023年7月26日返厂维修处理好，维修费520元。', 104, '1');
INSERT INTO `cmc_device` VALUES (101, '100', '3231475', 'GNSS接收机', '仪器设备', '2020-03-01', 0.00, 8, 'i90', '华测', 5.30, 'C204', '观测达到15小时以上搜索不到卫星，没法记录数据，2023.02.03已返厂处理好。\r\n电池卡槽接触不良，只能识别一个电池，于2023年6月29日返厂维修处理好，维修费520元。', 104, '1');
INSERT INTO `cmc_device` VALUES (102, '101', '3224983', 'GNSS接收机', '仪器设备', '2020-03-01', 0.00, 8, 'i90', '华测', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (103, '102', '3237195', 'GNSS接收机', '仪器设备', '2020-03-01', 0.00, 8, 'i90', '华测', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (104, '103', '3231481', 'GNSS接收机', '仪器设备', '2020-03-01', 0.00, 8, 'i90', '华测', 5.30, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (105, '104', '3231484', 'GNSS接收机', '仪器设备', '2020-03-01', 0.00, 8, 'i90', '华测', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (106, '105', '3311829', 'GNSS接收机', '仪器设备', '2020-12-30', 25000.00, 8, 'i90', '华测', 5.30, 'C204', '座充有问题，充不起电，于2023年12月10日联系华测厂家换新。', 104, '1');
INSERT INTO `cmc_device` VALUES (107, '106', '3311842', 'GNSS接收机', '仪器设备', '2020-12-30', 25000.00, 8, 'i90', '华测', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (108, '107', '3311827', 'GNSS接收机', '仪器设备', '2020-12-30', 25000.00, 8, 'i90', '华测', 5.30, 'C204', '电池卡槽B接触不良，识别不到电池，于2023年6月3日返厂维修处理好。', 104, '1');
INSERT INTO `cmc_device` VALUES (109, '108', '3260756', 'GNSS接收机', '仪器设备', '2020-12-30', 25000.00, 8, 'i90', '华测', 5.30, 'C204', '观静态的时候会自动关机，于2023年12月5日返厂维修处理好，维修费390元。', 104, '1');
INSERT INTO `cmc_device` VALUES (110, '109', '3379406', 'GNSS接收机', '仪器设备', '2021-01-01', 32000.00, 8, 'i90', '华测', 5.30, 'C204', '带差分', 104, '1');
INSERT INTO `cmc_device` VALUES (111, '110', '735239', '精密电子水准仪', '仪器设备', '2012-03-01', 0.00, 6, 'DINI0.3', '天宝', 12.00, 'C314', '2022年11月16日开不起机送星辰测绘公司维修，费用800元', 104, '1');
INSERT INTO `cmc_device` VALUES (112, '111', '739538', '精密电子水准仪', '仪器设备', '2015-04-01', 56800.00, 6, 'DINI0.3', '天宝', 12.00, '重庆分公司', '2022.11.21由于i角值过大，联系星辰测绘公司维修处理，11月30日送回公司。', 104, '1');
INSERT INTO `cmc_device` VALUES (113, '112', '740438', '精密电子水准仪', '仪器设备', '2012-03-01', 0.00, 6, 'DINI0.3', '天宝', 12.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (114, '113', '745910', '精密电子水准仪', '仪器设备', '2017-01-01', 0.00, 6, 'DINI0.3', '天宝', 12.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (115, '114', '14379', '电子水准仪', '仪器设备', NULL, 0.00, 6, 'SDL30', '索佳', 12.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (116, '115', '4111708', '电子水准仪', '仪器设备', NULL, 0.00, 6, 'ZDL 700', '中纬', 12.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (117, '116', '2352360', '电子水准仪', '仪器设备', NULL, 0.00, 6, 'SP250M', '徕卡', 12.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (118, '117', '2352679', '电子水准仪', '仪器设备', NULL, 0.00, 6, 'SP250M', '徕卡', 12.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (119, '118', '74435 74436', '玻钢水准尺', '仪器设备', NULL, 0.00, 8, '3m条码尺', '中纬', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (120, '119', '55927 55928', '铟钢水准尺', '仪器设备', NULL, 0.00, 8, '3m天宝条码尺', '珠峰', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (121, '120', '36673 36674', '铟钢水准尺', '仪器设备', NULL, 0.00, 8, '3m天宝条码尺', '珠峰', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (122, '121', '7070817 7070818', '铟钢水准尺', '仪器设备', NULL, 0.00, 8, '3m天宝条码尺', '德瑞普', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (123, '122', '3020525 3020526', '铟钢水准尺', '仪器设备', NULL, 0.00, 8, '3m天宝条码尺', '德瑞普', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (124, '123', '3022863 3022864', '铟钢水准尺', '仪器设备', NULL, 0.00, 8, '3m索佳条码尺', '德瑞普', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (125, '124', '82933 82934', '玻钢水准尺', '仪器设备', NULL, 0.00, 8, '3m条码尺', '徕卡', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (126, '125', '82939 82940', '玻钢水准尺', '仪器设备', NULL, 0.00, 8, '3m条码尺', '徕卡', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (127, '126', '67643 67644', '铟钢水准尺', '仪器设备', NULL, 0.00, 8, '2m天宝条码尺', '珠峰', NULL, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (128, '127', '70315 70316', '铟钢水准尺', '仪器设备', NULL, 0.00, 8, '2m天宝条码尺', '珠峰', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (129, '128', '7030807 7030808', '铟钢水准尺', '仪器设备', NULL, 0.00, 8, '3m天宝条码尺', '德瑞普', NULL, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (130, '129', '21101405 21101406', '铟钢水准尺', '仪器设备', '2021-11-02', 6000.00, 8, '3m天宝条码尺', '德瑞普', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (131, '130', '20103019', '普通测深仪', '仪器设备', NULL, 0.00, 8, 'S48-1', NULL, 11.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (132, '131', '20103002', '普通测深仪', '仪器设备', NULL, 0.00, 8, 'S48-1', NULL, 11.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (133, '132', '621622', '超声波测深仪', '仪器设备', '2021-10-11', 33000.00, 8, 'HD-LiTE', '中海达', 11.00, 'C204', '11月23日观音岩项目发现问题：1、作业过程中会自动熄屏，屏幕颜色显示不正常，字体模糊，拉花；2、测深杆连接GPS的一个螺丝掉；3、鼠标的左键不灵敏，夏志军帮寄回公司，11月28日返南京中海达厂家维修处理，12月08日处理好后寄攀枝花赵洪使用。', 104, '1');
INSERT INTO `cmc_device` VALUES (134, '133', '201910061709', '手持测距仪', '仪器设备', NULL, 0.00, 6, 'DL331070', '得力', NULL, 'C314', '', 104, '1');
INSERT INTO `cmc_device` VALUES (135, '134', '204501649', '手持测距仪', '仪器设备', NULL, 0.00, 6, NULL, NULL, NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (136, '135', '204501609', '手持测距仪', '仪器设备', NULL, 0.00, 6, NULL, NULL, NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (137, '136', '204501623', '手持测距仪', '仪器设备', NULL, 0.00, 6, 'DLE70', 'BOSCH', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (138, '137', '204501098', '手持测距仪', '仪器设备', NULL, 0.00, 6, NULL, NULL, NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (139, '138', NULL, '无人船', '仪器设备', NULL, 0.00, 8, 'S11', '南京智汇空间', 102.00, 'C204', '2022年10月19日带到星辰测绘公司维修\r\n2022年12月22日安徽项目还回，1 、左推水下无推力；2、天线接头损坏；3 、船底漏水，带到星辰测绘公司，然后返厂维修，最终更换推进器电机与更换船壳，费用5000元。', 104, '1');
INSERT INTO `cmc_device` VALUES (140, '139', NULL, '无人船', '仪器设备', '2022-01-05', 200000.00, 8, 'A12', '南京智汇空间', 102.00, 'C204', '22.3.8送到星辰测绘公司维修，22.3.28夏志军借到楞古,5.26送星辰测绘公司维修，5.30借到西藏直孔项目,8月返厂维修以及换外壳升级等，费用12000元，8.30送回公司，10.28寄船上配件到南京处理测量深度的问题，测试好之后换了一根线，11月3日寄回公司。2023.05.13从拉萨寄到南京维修，1、推进器维修，更换全新电机，3200。2、更换全新船体前舱盖，1000。3、更换测深仪数据板、解算板，1600。共计5000元。', 104, '1');
INSERT INTO `cmc_device` VALUES (141, '140', '15731，14238，15014，15133，15145，15316，15372，15407，40768，51948，53962，53963，54144，54236，54252，54257，71181,920212', '通风干湿温度表', '仪器设备', NULL, 0.00, NULL, 'DHM2', '天津', NULL, 'C204', '共18个', 104, '1');
INSERT INTO `cmc_device` VALUES (142, '141', '04 1399，04 1315，14020917，07 0135，07 0187,07 0099,11826，205320，205323，15122201，04 1290，07 0197，12060503', '高原空盒气压表', '仪器设备', NULL, 0.00, NULL, 'DYM3-1', '长春/宁波', NULL, 'C204', '共13个', 104, '1');
INSERT INTO `cmc_device` VALUES (143, '142', 'R22KA00S6WN', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S4', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (144, '143', 'R22KB00564X', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S4', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (145, '144', 'R22M2006P4R', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S3', NULL, 'C204', '用外壳会黑屏', 104, '1');
INSERT INTO `cmc_device` VALUES (146, '145', 'R22KB0056CY', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S4', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (147, '146', 'R22KA00S64E', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S4', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (148, '147', 'R22M2006SOX', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S3', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (149, '148', 'R22K500P1RV', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S3', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (150, '149', 'R22KB00573E', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S4', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (151, '150', 'R22K800BS6V', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S4', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (152, '151', 'R22M4001XFZ', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S4', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (153, '152', 'R22K800BMFE', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S4', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (154, '153', 'R22K800BM4J', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S4', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (155, '154', 'R22KB00567W', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S4', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (156, '155', 'R22K300JCKT', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S3', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (157, '156', 'R22M4001YJZ', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S4', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (158, '157', 'R22KB00570K', '平板电脑', '仪器设备', NULL, 0.00, 4, 'SM-T830', '三星S4', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (159, '158', 'DSFFCGLS20460247', '无人机', '仪器设备', '2021-11-12', 360000.00, 8, '飞马D200S', '飞马', 137.00, 'C204', '2022.11.13-2022.11.18用于科博会展览，保险有效期为2022.11.25至2023.11.24', 104, '1');
INSERT INTO `cmc_device` VALUES (160, '158-1', 'D-CAM310G1911023', '相机', '仪器设备', NULL, 0.00, 6, '飞马单镜头相机', '飞马', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (161, '159', 'DSFFCGLS19480130 ', '无人机', '仪器设备', '2019-12-03', 0.00, 8, '飞马D200S', '飞马', 137.00, 'C204', '2022.3.8寄天津维护保养,4.12寄回，保险有效期至2023-02-15', 104, '1');
INSERT INTO `cmc_device` VALUES (162, '160', 'D2000GLS21051080 （相机D-OP300021050682）', '无人机', '仪器设备', NULL, 0.00, 8, '飞马D2000', '飞马', NULL, 'C204', '保险有效期至2024-02-23，寄回厂家换快门后2024.1.11寄回公司', 104, '1');
INSERT INTO `cmc_device` VALUES (163, '161', 'D-0P30018330056', '相机', '仪器设备', NULL, 0.00, 6, '飞马五镜头相机', '飞马', NULL, 'C204', '2022年07月12日寄天津换快门，于2022年08月22日寄回公司，2022.11.13-2022.11.18用于科博会展览', 104, '1');
INSERT INTO `cmc_device` VALUES (164, '162', '1ZNDH6Q00A7PWV（倾斜摄影相机D2M2020309）', '无人机', '仪器设备', NULL, 0.00, 8, '大疆M300(自带相机)', '大疆', NULL, 'C204', '保险有效期至2022-09-28，相机于2022.09.19寄双流换快门，于2022年10月14日寄回公司', 104, '1');
INSERT INTO `cmc_device` VALUES (165, '163', '0V2DG6C-0A30038', '无人机', '仪器设备', NULL, 0.00, 8, 'DJI PHANTOM4 RTK', '大疆', 137.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (166, '164', '0V2DGAB-0A30038', '无人机', '仪器设备', NULL, 0.00, 8, 'DJI PHANTOM4 RTK', '大疆', 137.00, 'C204', '2023.2.10云台轴电调板维修，费用347元，此设备于2024年1月23日在广西凤山平乐风电场项目飞行中坠落，未找回，已丢失。根据领导指示将该设备按报废处理。', 104, '1');
INSERT INTO `cmc_device` VALUES (167, '165', '0V2SH6G-RA30021', '无人机', '仪器设备', '2020-12-04', 0.00, 8, 'DJI PHANTOM4 RTK', '大疆', 137.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (168, '166', '0V2SH6G-RA30221', '无人机', '仪器设备', '2020-12-04', 0.00, 8, 'DJI PHANTOM4 RTK', '大疆', 137.00, 'C204', '2022.4.8出现如下问题：桨座损坏，左、右脚架开裂，维修费用510元', 104, '1');
INSERT INTO `cmc_device` VALUES (169, '167', '0V2DGCB-RA30036', '无人机', '仪器设备', NULL, 0.00, 8, 'DJI PHANTOM4 RTK', '大疆', 137.00, '双江口测量中心', '2024年4月10日检测：云台Roll轴支架V03、云台Phantom4 Yaw电机排线盖V3、云台Phantom 4 Yaw电机 V2变形，机架Phantom 4 RTK 上壳开裂/断裂，云台Phantom 4 Roll电机异响，维修费563元。', 104, '1');
INSERT INTO `cmc_device` VALUES (170, '168', '866795047192685', '华为平板', '仪器设备', NULL, 0.00, 6, 'KOB2-L09', '华为', NULL, 'C204', '32G', 104, '1');
INSERT INTO `cmc_device` VALUES (171, '169', 'A000009B034255', '华为平板', '仪器设备', NULL, 0.00, 6, 'BAH2-AL10', '华为', NULL, 'C204', '64G，环绕定制用', 104, '1');
INSERT INTO `cmc_device` VALUES (172, '170', 'A00000B74D6156', '华为平板', '仪器设备', NULL, 0.00, 6, 'SCMR-AL09', '华为', NULL, 'C204', '128G', 104, '1');
INSERT INTO `cmc_device` VALUES (173, '171', '01202JR', '无人机', '仪器设备', '2021-12-01', 0.00, 8, 'DJI御2', '大疆', 137.00, 'C314', '该设备由激光技术中心自行维护与管理', 107, '1');
INSERT INTO `cmc_device` VALUES (174, '172', '7NKVWRLL', '无人机', '仪器设备', '2021-07-01', 480000.00, 8, '傲势XC-25', '傲势', 394.50, 'C314', '该设备由激光技术中心自行维护与管理，2022.11.13-2022.11.18用于科博会展览', 107, '1');
INSERT INTO `cmc_device` VALUES (175, '173', 'P022003067', '无人机', '仪器设备', '2020-03-01', 0.00, 8, '大黄蜂BB-4', '华测', 137.00, 'C314', '该设备由激光技术中心自行维护与管理', 107, '1');
INSERT INTO `cmc_device` VALUES (176, '174', 'D2000STJ22500615（相机D-OP300022461255） ', '无人机', '仪器设备', '2021-11-01', 100000.00, 8, '飞马D2000S', '飞马', NULL, 'C204', '2022年6月22日保险理赔新飞机变更为D2000STJ22210255；2023年3月13日楞古项目飞行故障，3月27日保险理赔新飞机与相机变更为D2000STJ22500615（相机D-OP300022461255）。8月7日巴宜行政区项目还回，寄到天津飞马厂家处理，经厂家更换快门测试好后于08.23寄到云南灾普项目使用', 107, '1');
INSERT INTO `cmc_device` VALUES (177, '175', 'D-LiDAR200022160350', '激光雷达', '仪器设备', '2021-11-01', 110000.00, 8, '飞马D2000S', '飞马', NULL, 'C204', '2022年6月22日保险理赔新雷达编号变更为D-LiDAR200022160350', 107, '1');
INSERT INTO `cmc_device` VALUES (178, '176', 'C041952055', '多平台激光雷达', '仪器设备', '2020-03-01', 1900000.00, 8, 'AS-1300HL', '华测', 461.00, 'C314', '该设备由激光技术中心自行维护与管理', 107, '1');
INSERT INTO `cmc_device` VALUES (179, '177', 'A622051005', '单相机', '仪器设备', '2020-03-01', 0.00, 5, 'AS-C610', '华测', NULL, 'C314', '该设备由激光技术中心自行维护与管理', 107, '1');
INSERT INTO `cmc_device` VALUES (180, '178', 'A432014039', '单相机', '仪器设备', '2020-03-01', 0.00, 5, 'AS-C420', '华测', NULL, 'C314', '该设备由激光技术中心自行维护与管理', 107, '1');
INSERT INTO `cmc_device` VALUES (181, '179', 'DG3M2021051', '倾斜相机', '仪器设备', '2021-07-01', 0.00, 5, 'DG3M', '睿铂', NULL, 'C314', '该设备由激光技术中心自行维护与管理', 107, '1');
INSERT INTO `cmc_device` VALUES (182, '180', 'CA003231741', '无人机', '仪器设备', '2017-09-01', 0.00, 8, '纵横CW-10', NULL, 137.00, 'C314', '电池已回收处理，暂不使用，该设备由激光技术中心自行维护与管理', 107, '1');
INSERT INTO `cmc_device` VALUES (183, '181', 'DMQYLWNTLM95', '平板', '仪器设备', NULL, 0.00, 6, 'ipad mini(第五代) MUQY2CH/A', '苹果', NULL, 'C314', '64G，该设备由激光技术中心自行维护与管理', 107, '1');
INSERT INTO `cmc_device` VALUES (184, '182', '270801', '全站仪', '仪器设备', '2021-12-01', 18000.00, 8, 'NTS-342R10A', '南方', 15.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (185, '183', '890064', '全站仪', '仪器设备', '2021-11-02', 323000.00, 8, 'TS60 I 0.5\"', '徕卡', 15.00, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (186, '184', 'LS000256', '便携式移动流速仪', '仪器设备', '2022-03-01', 0.00, NULL, 'LS300－A', '徕斯达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (187, '185', '755762', '精密电子水准仪', '仪器设备', '2021-11-02', 40500.00, 6, 'DINI0.3', '天宝', 12.00, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (188, '186', '21082701 21082702', '铟钢水准尺', '仪器设备', '2021-11-02', 6000.00, 8, '3m天宝条码尺', '德瑞普', NULL, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (189, '187', 'ZB1850960', '常州测读仪', '仪器设备', NULL, 1000.00, 5, 'WQ-609', NULL, NULL, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (190, '188', '821834', '常州测斜仪', '仪器设备', NULL, 10000.00, 5, 'CX-901F', NULL, NULL, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (191, '189', '2105284', '常州水位计', '仪器设备', NULL, 1000.00, 5, 'SWY-30', NULL, NULL, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (192, '190', 'G210103047', '数显卡尺', '仪器设备', NULL, 0.00, 5, '（0-200）mm 0.01mm', '得力', NULL, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (193, '191', '756721', '精密电子水准仪', '仪器设备', '2022-03-01', 32000.00, 6, 'DINI0.3', '天宝', 12.00, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (194, '192', '756814', '精密电子水准仪', '仪器设备', '2022-03-01', 32000.00, 6, 'DINI0.3', '天宝', 12.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (195, '193', '21102901 21102902', '铟钢水准尺', '仪器设备', '2022-03-01', 6000.00, 8, '3m天宝条码尺', '德瑞普', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (196, '194', '191068705', '手持测距仪', '仪器设备', NULL, 0.00, 6, 'HT-Q7 50m', 'HCJYET', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (197, '195', '68370', '气垫船', '仪器设备', '2022-05-18', 649.00, NULL, '海鹰号3人船', 'INTEX', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (198, '196', '191068706', '手持测距仪', '仪器设备', NULL, 0.00, 6, 'HT-Q7 50m', 'HCJYET', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (199, '197', 'SB000833', '全站仪', '仪器设备', '2022-06-01', 64000.00, 8, 'FX-201', '索佳', 15.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (200, '198', 'VATC13804231', 'GNSS接收机', '仪器设备', '2022-06-01', 11500.00, 8, 'iRTK10', '海星达', 5.30, 'C204', '2022.6.1购买，由2825896以旧换新', 104, '1');
INSERT INTO `cmc_device` VALUES (201, '199', '22051205 22051206', '铟钢水准尺', '仪器设备', '2022-08-03', 5500.00, 8, '3m天宝条码尺', '德瑞普', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (202, '200', NULL, '管道检测机器人', '仪器设备', '2021-07-13', 145000.00, 6, 'SD6350A1', '施罗德', 63.20, '重庆分公司', '', 114, '1');
INSERT INTO `cmc_device` VALUES (203, '201', NULL, '管道检测潜望镜', '仪器设备', '2021-07-13', 25000.00, 6, 'E25C-C14', '施罗德', NULL, '重庆分公司', '', 114, '1');
INSERT INTO `cmc_device` VALUES (204, '202', NULL, '通用式多中心强制对中基座', '仪器设备', '2022-10-10', 14000.00, NULL, NULL, '公司研发，飞翔公司制造', NULL, 'C204', '共5套，2023.2.17二滩项目柏金川借用2套，3.27还回', 104, '1');
INSERT INTO `cmc_device` VALUES (205, '203', '757247', '精密电子水准仪', '仪器设备', '2022-11-16', 32000.00, 6, 'DINI0.3', '天宝', 12.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (206, '204', '758408', '精密电子水准仪', '仪器设备', '2022-11-09', 34000.00, 6, 'DINI0.3', '天宝', 12.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (207, '205', '22113003 22113004', '铟钢水准尺', '仪器设备', '2022-11-09', 6000.00, 8, '3m天宝条码尺', '德瑞普', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (208, '206', '2207108', '爆破测振仪', '仪器设备', '2022-12-28', 11000.00, 7, 'TC-4850-3', '中科测控', NULL, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (209, '207', 'VBTH15191010', 'GNSS接收机', '仪器设备', '2023-02-28', 10000.00, 8, 'vRTK Plus', '海星达', NULL, 'C204', '2023.02.28购买', 104, '1');
INSERT INTO `cmc_device` VALUES (210, '208', 'DL333203', '风速仪', '仪器设备', '2022-11-28', 99.00, NULL, NULL, '得力', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (211, '209', 'D20FCGLS22480135（相机D-OP400023010109）', '无人机', '仪器设备', '2023-03-28', 720000.00, 8, '飞马D20', '飞马', 383.60, 'C314', '', 107, '1');
INSERT INTO `cmc_device` VALUES (212, '210', '23022405 23022406', '铟钢水准尺', '仪器设备', '2023-03-30', 4800.00, 8, '2m天宝条码尺', '德瑞普', NULL, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (213, '211', 'WD16690696', '无人船', '仪器设备', '2023-05-26', 128000.00, 8, 'iBoat BSA', '中海达', 102.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (214, '212', NULL, '常州测读仪', '仪器设备', '2021-11-01', 1000.00, 5, '609A', NULL, NULL, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (215, '213', NULL, '常州测读仪', '仪器设备', '2021-11-01', 1000.00, 5, '609A', NULL, NULL, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (216, '214', '50746', '常州测斜仪', '仪器设备', '2021-11-01', 10000.00, 5, 'CX-901F', NULL, NULL, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (217, '215', '50771', '常州测斜仪', '仪器设备', '2021-11-01', 10000.00, 5, 'CX-901F', NULL, NULL, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (218, '216', '2012287', '常州水位计', '仪器设备', '2021-11-01', 1000.00, 5, 'JY-8090', NULL, NULL, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (219, '217', '2012272', '常州水位计', '仪器设备', '2021-11-01', 1000.00, 5, 'JY-8090', NULL, NULL, '重庆分公司', '', 104, '1');
INSERT INTO `cmc_device` VALUES (220, '218', '3786166', 'GNSS接收机', '仪器设备', '2023-12-08', 10000.00, 8, 'i86', '华测', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (221, '219', '3786194', 'GNSS接收机', '仪器设备', '2023-12-08', 10000.00, 8, 'i86', '华测', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (222, '220', '3793998', 'GNSS接收机', '仪器设备', '2023-12-08', 10000.00, 8, 'i86', '华测', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (223, '221', '3794001', 'GNSS接收机', '仪器设备', '2023-12-08', 10000.00, 8, 'i86', '华测', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (224, '222', '主机SLAM100234800823（GNSS模块S-RTK10023320183 天线SRTKTX-S23462089 背包平台S-PACK10023460167）', '手持激光雷达扫描仪', '仪器设备', '2023-12-08', 128000.00, 8, 'SLAM-100', '飞马', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (225, '223', '230306001 230306002', '锰钢水准尺', '仪器设备', '2023-12-08', 2200.00, 8, '3m徕卡条码尺', '徕卡', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (226, '224', NULL, '激光雷达', '仪器设备', '2024-01-23', 420000.00, 8, 'AU20', '华测', NULL, 'C314', '该设备由激光技术中心自行维护与管理', 104, '1');
INSERT INTO `cmc_device` VALUES (227, '225', '23112815 23112816', '铟钢水准尺', '仪器设备', '2024-04-26', 48000.00, 8, '2m天宝条码尺', '德瑞普', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (228, '226', 'VA11000914', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V60', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (229, '227', 'VA11000950', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V60', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (230, '228', 'VA11001890', 'GPS接收机', '仪器设备', NULL, 0.00, 8, 'V60', '中海达', NULL, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (231, '229', '895536', '全站仪', '仪器设备', '2024-01-25', 320000.00, 8, 'TS60 I 0.5\"', '徕卡', 15.00, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (232, '230', 'SG50DB148695181JKA-D', 'GNSS接收机', '仪器设备', '2023-12-29', 12500.00, 8, '极点', '南方', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (233, '231', 'SG50DB148695144JKA-D', 'GNSS接收机', '仪器设备', '2023-12-29', 12500.00, 8, '极点', '南方', 5.30, 'C204', '', 104, '1');
INSERT INTO `cmc_device` VALUES (234, '232', '1581F6CDC241D003GTBL', '无人机', '仪器设备', '2024-03-28', 2799.00, 8, 'DJI Mini2 SE', '大疆', NULL, 'C314', '', 107, '1');
INSERT INTO `cmc_device` VALUES (235, 'BJD01', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, NULL, '华为', NULL, '德方子公司', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (236, 'BJD02', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, 'Vostro 5481', '惠普', NULL, 'C303B', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (237, 'BJD03', NULL, '笔记本电脑', '办公设备', '2019-12-01', 0.00, NULL, '灵越5000', 'DELL', NULL, 'C212', '', 105, NULL);
INSERT INTO `cmc_device` VALUES (238, 'BJD04', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, '魔鬼鱼DR722', '未来人类', NULL, 'C317', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (239, 'BJD05', NULL, '笔记本电脑', '办公设备', '2014-01-01', 0.00, NULL, '明基750', '明基', NULL, 'C212', '', 105, NULL);
INSERT INTO `cmc_device` VALUES (240, 'BJD06', NULL, '笔记本电脑', '办公设备', '2020-01-01', 0.00, NULL, '战99锐龙G2', '惠普', NULL, '重庆分公司', '', 114, NULL);
INSERT INTO `cmc_device` VALUES (241, 'BJD07', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, 'thinkpadE480', '联想', NULL, 'C313', '', 112, NULL);
INSERT INTO `cmc_device` VALUES (242, 'BJD08', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, 'OMEN by HP Laptop 15-dc0011TX', '惠普', NULL, 'C303', '已停用', 106, NULL);
INSERT INTO `cmc_device` VALUES (243, 'BJD09', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, '911MT', 'THUNDEROBOT', NULL, 'C310', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (244, 'BJD10', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, 'G3 3590', '戴尔', NULL, 'C310', '', 107, NULL);
INSERT INTO `cmc_device` VALUES (245, 'BJD11', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, 'G3 3500', '戴尔', NULL, 'C310', '', 107, NULL);
INSERT INTO `cmc_device` VALUES (246, 'BJD12', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, '15C3BB15-5EBA-4319-828C-53C3C7AFE3A1', '戴尔', NULL, 'C310', '', 107, NULL);
INSERT INTO `cmc_device` VALUES (247, 'BJD13', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, '911耀武', '雷神', NULL, 'C310', '', 108, NULL);
INSERT INTO `cmc_device` VALUES (248, 'BJD14', NULL, '笔记本电脑', '办公设备', '2019-01-01', 0.00, NULL, 'T7', '未来人类', NULL, 'C308A', '已交张学仪家属', 110, NULL);
INSERT INTO `cmc_device` VALUES (249, 'BJD15', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, '战99 AMD版-C9', '惠普', NULL, 'C310', '', 108, NULL);
INSERT INTO `cmc_device` VALUES (250, 'BJD16', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, '战99 AMD版-C9', '惠普', NULL, 'C310', '', 108, NULL);
INSERT INTO `cmc_device` VALUES (251, 'BJD17', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, '光影精灵8', '惠普', NULL, 'C310', '', 108, NULL);
INSERT INTO `cmc_device` VALUES (252, 'BJD18', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, 'G3 3590', 'DELL', NULL, 'C308', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (253, 'BJD19', NULL, '笔记本电脑', '办公设备', '2022-01-01', 5680.00, NULL, 'ThinkPad R14', '联想', NULL, 'C308', '设备为总公司购买', 115, NULL);
INSERT INTO `cmc_device` VALUES (254, 'BJD20', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, 'Pavilion 15-ck013 Tx15', '惠普', NULL, 'C308', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (255, 'BJD21', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, 'WRTD-WFH9Q', '华为', NULL, 'C303A', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (256, 'BJD22', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, NULL, '联想', NULL, 'C303A', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (257, 'BJD23', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, '17R4', '戴尔', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (258, 'BJD24', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, 'E550', 'ThinkPad', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (259, 'BJD25', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, '灵越16', '戴尔', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (260, 'BJD26', NULL, '笔记本电脑', '办公设备', '2020-01-01', 0.00, NULL, 'G15', '戴尔', NULL, 'C311', '', 115, NULL);
INSERT INTO `cmc_device` VALUES (261, 'BJD27', NULL, '笔记本电脑', '办公设备', '2020-01-01', 0.00, NULL, 'G15', '戴尔', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (262, 'BJD28', NULL, '笔记本电脑', '办公设备', '2020-01-01', 0.00, NULL, 'G15', '戴尔', NULL, '重庆分公司', '', 114, NULL);
INSERT INTO `cmc_device` VALUES (263, 'BJD29', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, 'G5', '戴尔', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (264, 'BJD30', NULL, '笔记本电脑', '办公设备', '2021-01-01', 0.00, NULL, '灵越16', '戴尔', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (265, 'BJD31', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, 'G3', '戴尔', NULL, 'C311', '夏志军离职，已折旧处理', 111, NULL);
INSERT INTO `cmc_device` VALUES (266, 'BJD32', NULL, '笔记本电脑', '办公设备', '2022-01-01', 0.00, NULL, 'G15', '戴尔', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (267, 'BJD33', NULL, '笔记本电脑', '办公设备', '2022-01-01', 0.00, NULL, 'G15', '戴尔', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (268, 'BJD34', NULL, '笔记本电脑', '办公设备', '2022-01-01', 0.00, NULL, 'G15', '戴尔', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (269, 'BJD35', NULL, '笔记本电脑', '办公设备', '2019-01-01', 0.00, NULL, 'G3', '戴尔', NULL, 'C311', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (270, 'BJD36', NULL, '笔记本电脑', '办公设备', '2019-01-01', 0.00, NULL, 'G3', '戴尔', NULL, 'C313', '', 112, NULL);
INSERT INTO `cmc_device` VALUES (271, 'BJD37', NULL, '笔记本电脑', '办公设备', '2021-01-01', 0.00, NULL, '灵越5502', '戴尔', NULL, 'C313', '', 112, NULL);
INSERT INTO `cmc_device` VALUES (272, 'BJD38', NULL, '笔记本电脑', '办公设备', '2021-01-01', 0.00, NULL, 'G3', '戴尔', NULL, 'C0219', '', 112, NULL);
INSERT INTO `cmc_device` VALUES (273, 'BJD38-1', NULL, '笔记本电脑', '办公设备', '2022-08-31', 9269.00, NULL, 'G15', '戴尔', NULL, 'C0219', '', 112, NULL);
INSERT INTO `cmc_device` VALUES (274, 'BJD39', NULL, '笔记本电脑', '办公设备', '2022-01-01', 0.00, NULL, 'ThinkBook 15 G3 ACL', '联想', NULL, 'C0219', '', 112, NULL);
INSERT INTO `cmc_device` VALUES (275, 'BJD40', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, NULL, '华硕', NULL, '金川测量中心', '', 203, NULL);
INSERT INTO `cmc_device` VALUES (276, 'BJD41', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, '飞行堡垒9/酷睿I7-11800H/', '华硕', NULL, '巴拉测量中心', '', 204, NULL);
INSERT INTO `cmc_device` VALUES (277, 'BJD42', NULL, '笔记本电脑', '办公设备', NULL, 0.00, NULL, 'ROG-魔霸3', '华硕', NULL, '邻水项目部', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (278, 'BJD43', NULL, '笔记本电脑', '办公设备', '2017-04-01', 0.00, NULL, '游匣', '戴尔', NULL, '德方子公司', '', 115, NULL);
INSERT INTO `cmc_device` VALUES (279, 'BJD44', NULL, '笔记本电脑', '办公设备', '2023-02-27', 7000.00, NULL, '光影精灵8Pro', '惠普', NULL, 'C310', '', 107, NULL);
INSERT INTO `cmc_device` VALUES (280, 'BJD45', NULL, '笔记本电脑', '办公设备', '2023-04-20', 7499.00, NULL, '战99锐龙G4', '惠普', NULL, 'C310', '', 107, NULL);
INSERT INTO `cmc_device` VALUES (281, 'BJD46', NULL, '笔记本电脑', '办公设备', '2023-08-10', 5400.00, NULL, 'I5-1135 G7', '戴尔', NULL, 'C303B', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (282, 'BJD47', NULL, '笔记本电脑', '办公设备', '2023-11-29', 6508.00, NULL, '华为Mate Book 14S 2021 11代酷睿i5-11300H 16G 512G', '华为', NULL, 'C303', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (283, 'BJD47', NULL, '笔记本电脑', '办公设备', '2023-11-01', 7487.00, NULL, 'Pro9 i5(8G+256G)', '微软', NULL, 'C304A', '', 113, NULL);
INSERT INTO `cmc_device` VALUES (284, 'BJD49', NULL, '笔记本电脑', '办公设备', '2023-12-29', 8400.00, NULL, 'Think pad X1', NULL, NULL, 'C306', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (285, 'BJD50', NULL, '笔记本电脑', '办公设备', '2024-03-26', 7999.00, NULL, 'G15 5530 14核酷睿i 7HX 16G 1TB 240Hz', '戴尔', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (286, 'BJD51', NULL, '笔记本电脑', '办公设备', '2024-03-26', 6149.00, NULL, 'G15 5530 13代酷睿', '戴尔', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (287, 'BJD52', NULL, '笔记本电脑', '办公设备', '2024-03-26', 7784.00, NULL, 'G15 5530 14核酷睿i 7HX 16G 1TB 240Hz', '戴尔', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (288, 'BX01', NULL, '冰箱', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C306', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (289, 'BX02', NULL, '冰箱', '办公设备', NULL, 0.00, NULL, 'BCD-118KA9', 'TCL', NULL, 'C303B', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (290, 'BXG01', NULL, '保险柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C306', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (291, 'BXG02', NULL, '保险柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C302', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (292, 'CJ01', NULL, '茶几', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C320', '2张', 101, NULL);
INSERT INTO `cmc_device` VALUES (293, 'CJ02', NULL, '茶几', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C319', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (294, 'CJ03', NULL, '茶几', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C306', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (295, 'CJ04', NULL, '茶几', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C316', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (296, 'CJ05', NULL, '茶几', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C316A', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (297, 'CJ06', NULL, '茶几', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C305', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (298, 'CJ07', NULL, '茶几', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C219', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (299, 'CJ08', NULL, '茶几', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C318', '', 102, NULL);
INSERT INTO `cmc_device` VALUES (300, 'CJ09', NULL, '茶几', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C307', '', 102, NULL);
INSERT INTO `cmc_device` VALUES (301, 'CJ10', NULL, '茶几', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C307', '', 102, NULL);
INSERT INTO `cmc_device` VALUES (302, 'CJ11', NULL, '茶几', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C212', '', 103, NULL);
INSERT INTO `cmc_device` VALUES (303, 'CJ12', NULL, '茶几', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C313', '', 112, NULL);
INSERT INTO `cmc_device` VALUES (304, 'D001', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, NULL, '惠普', NULL, 'C320', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (305, 'D002', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '/显示器：DELL E2420H', '戴尔', NULL, 'C319', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (306, 'D003', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '/显示器:DELL S2319HS　', '戴尔', NULL, 'C306', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (307, 'D004', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C316', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (308, 'D005', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '显示器联想', '联想', NULL, 'C316A', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (309, 'D006', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '显示器小米', '小米', NULL, 'C305', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (310, 'D007', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '/显示器DELL', '戴尔', NULL, 'C303B', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (311, 'D008', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '/显示器：DELL P2414H', '戴尔', NULL, 'C318', '', 102, NULL);
INSERT INTO `cmc_device` VALUES (312, 'D009', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '/显示器：ASUS VG278', NULL, NULL, 'C307', '', 102, NULL);
INSERT INTO `cmc_device` VALUES (313, 'D010', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '/显示器：HKC MG32A1Q', NULL, NULL, 'C307', '', 102, NULL);
INSERT INTO `cmc_device` VALUES (314, 'D011', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '34英寸WQHD曲面带鱼屏/拯救者刃7000k', '小米/联想', NULL, 'C212', '', 103, NULL);
INSERT INTO `cmc_device` VALUES (315, 'D012', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'E2420H、OptiPlex 3080', '戴尔', NULL, '德方子公司', '设备名称：DESKTOP-4MCPDAM \r\n处理器：Intel(R) Core(TM)i5-10500 CPU @ 310GHz 3.10', 104, NULL);
INSERT INTO `cmc_device` VALUES (316, 'D013', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '扬天M4000q-00／显示器：L2364A', 'Lenovo', NULL, 'C313', '', 112, NULL);
INSERT INTO `cmc_device` VALUES (317, 'D015', NULL, '台式电脑', '办公设备', '2023-05-18', 4350.00, NULL, 'I5 12400 16G 1TSSD /显示器：AOC', '英特尔/AOC', NULL, 'C303B', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (318, 'D015-1', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '组装机', NULL, NULL, 'C219', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (319, 'D016', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'i5-4570 3.20GHz／显示器：戴尔', '英特尔/戴尔', NULL, 'C303B', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (320, 'D017', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'i3-2120 3.30GHz／显示器：戴尔 E2314Hf', '英特尔／戴尔', NULL, 'C303B', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (321, 'D018', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'i5-4570 3.20GHz／显示器：明基 XL2411-B', '英特尔／明基', NULL, 'C303B', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (322, 'D018-1', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '组装机', NULL, NULL, 'C204', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (323, 'D018-2', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '组装机', NULL, NULL, 'C219', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (324, 'D019', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'i3-10105 3.70GHz／显示器：戴尔 SE2219H', '英特尔／戴尔', NULL, 'C303B', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (325, 'D020', NULL, '台式电脑', '办公设备', '2021-01-01', 0.00, NULL, '/攀升P18', 'AOC/攀升', NULL, 'C212', '', 105, NULL);
INSERT INTO `cmc_device` VALUES (326, 'D021', NULL, '台式电脑', '办公设备', '2020-03-01', 0.00, NULL, '/战99Pro G1MT', '惠普', NULL, 'C212', '', 105, NULL);
INSERT INTO `cmc_device` VALUES (327, 'D022', NULL, '台式电脑', '办公设备', '2018-03-01', 0.00, NULL, '/OptiPlex 3046', 'DELL/DELL', NULL, 'C212', '', 105, NULL);
INSERT INTO `cmc_device` VALUES (328, 'D023', NULL, '台式电脑', '办公设备', '2022-03-01', 0.00, NULL, '/战境S5 I5', 'AOC/攀升', NULL, 'C212', '', 105, NULL);
INSERT INTO `cmc_device` VALUES (329, 'D024', NULL, '台式电脑', '办公设备', '2021-01-01', 0.00, NULL, '/攀升P18', 'AOC/攀升', NULL, 'C212', '', 105, NULL);
INSERT INTO `cmc_device` VALUES (330, 'D025', NULL, '台式电脑', '办公设备', '2021-01-01', 0.00, NULL, '/攀升P18', 'AOC/攀升', NULL, 'C212', '', 105, NULL);
INSERT INTO `cmc_device` VALUES (331, 'D025-1', NULL, '台式电脑', '办公设备', '2022-11-08', 5380.00, NULL, '联想启天M455-A223 i5-12500 8G 1Tssd/显示器联想', '联想', NULL, 'C212', '', 105, NULL);
INSERT INTO `cmc_device` VALUES (332, 'D025-2', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '组装机', NULL, NULL, 'C212', '公用', 105, NULL);
INSERT INTO `cmc_device` VALUES (333, 'D026', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '组装机/显示器：明基', NULL, NULL, 'C317', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (334, 'D027', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '组装机/显示器：DELL', NULL, NULL, 'C317', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (335, 'D028', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '组装机/显示器：DELL', NULL, NULL, 'C304', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (336, 'D028-1', NULL, '台式电脑', '办公设备', '2022-12-06', 5380.00, NULL, '联想启天M455-A223 i5-12500 8G 1Tssd/显示器联想', '联想', NULL, 'C304', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (337, 'D029', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '组装机/显示器：DELL', NULL, NULL, 'C317', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (338, 'D030', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'G3 3500/显示器：DELL', NULL, NULL, 'C304', '服务器', 106, NULL);
INSERT INTO `cmc_device` VALUES (339, 'D031', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '组装机/显示器：DELL', NULL, NULL, 'C317', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (340, 'D032', NULL, '台式电脑', '办公设备', '2021-01-01', 0.00, NULL, 'OptiPlex 3080/显示器E2420H', '戴尔', NULL, 'C212', '', 105, NULL);
INSERT INTO `cmc_device` VALUES (341, 'D033', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '天逸510PRO/显示器L2345', '联想', NULL, 'C303', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (342, 'D034', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'i5-4590  3.30GHz／显示器：戴尔', '组装机/戴尔', NULL, 'C310', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (343, 'D035', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'i5-2320  3.00GHz／显示器：三星', '组装机/三星', NULL, 'C310', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (344, 'D036', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '技嘉X570 AORUS ELITE WIFI/显示器：戴尔 P2421D', '技嘉', NULL, 'C310', '', 107, NULL);
INSERT INTO `cmc_device` VALUES (345, 'D037', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'X570 UD/显示器：冠捷AOC2702 Q27G2G4', '技嘉', NULL, 'C310', '', 107, NULL);
INSERT INTO `cmc_device` VALUES (346, 'D038', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '/', '组装机', NULL, 'C310', '', 108, NULL);
INSERT INTO `cmc_device` VALUES (347, 'D039', NULL, '台式电脑', '办公设备', '2015-01-01', 0.00, NULL, '/', '组装机', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (348, 'D040', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '主机：天逸510/显示器：联想L2364A', '联想', NULL, 'C308', '设备为总公司购买', 109, NULL);
INSERT INTO `cmc_device` VALUES (349, 'D041', NULL, '台式电脑', '办公设备', '2022-01-01', 5380.00, NULL, '主机：Thinkcentre E77/显示器：DELL F20238FS0', '联想', NULL, '德方子公司', '', 115, NULL);
INSERT INTO `cmc_device` VALUES (350, 'D042', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '/显示器：DELL BP02PZ1', '组装机', NULL, 'C308', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (351, 'D043', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '/显示器：BENQ XL2411-8', '组装机', NULL, 'C308', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (352, 'D044', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '/显示器：DELL E2414Ht', '组装机', NULL, 'C308', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (353, 'D045', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '主机：Thinkcentre E77/显示器：联想F20238FS0', '联想', NULL, 'C308', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (354, 'D046', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '主机：天逸510/显示器：联想L2364A', '联想', NULL, 'C308', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (355, 'D047', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '/显示器：DELL E2314Hf', '组装机', NULL, 'C308', '质检用', 109, NULL);
INSERT INTO `cmc_device` VALUES (356, 'D048', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '主机：OPTIPLEX/显示器：三星 E1920NR 三星 E1921NR', 'DELL', NULL, 'C308', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (357, 'D049', NULL, '台式电脑', '办公设备', '2022-05-20', 12769.00, NULL, '/显示器：BENQ XL2411-8', '组装机', NULL, 'C308', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (358, 'D050', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '组装机/戴尔', '戴尔', NULL, 'C303A', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (359, 'D051', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '/S22B150H', '三星', NULL, 'C303A', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (360, 'D052', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '/943HPLUS', '三星', NULL, 'C303A', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (361, 'D053', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'AMD3.5HZ/显示器：华硕VG248', '组装机', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (362, 'D054', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'I5-6400 2.7GHz/显示器：冠捷24B1', '组装机', NULL, 'C308A', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (363, 'D055', NULL, '台式电脑', '办公设备', '2019-01-01', 0.00, NULL, 'I5-8500 3Hz/显示器：明基XL2411P', '组装机', NULL, 'C310', '', 107, NULL);
INSERT INTO `cmc_device` VALUES (364, 'D056', NULL, '台式电脑', '办公设备', '2019-01-01', 0.00, NULL, 'I5-8500 3Hz/显示器：明基XL2411P', '组装机', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (365, 'D057', NULL, '台式电脑', '办公设备', '2019-01-01', 0.00, NULL, 'AMD3.5HZ/显示器：明基XL2411Z', '组装机', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (366, 'D058', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'E5-2603 0 @ 1.80GHZ/显示器：冠捷24B1', '组装机', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (367, 'D059', NULL, '台式电脑', '办公设备', '2018-01-01', 0.00, NULL, 'I5-8500 3Hz/显示器：明基XL2411P', '组装机', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (368, 'D060', NULL, '台式电脑', '办公设备', '2019-01-01', 0.00, NULL, 'AMD3.5HZ/显示器：明基XL2411Z', '组装机', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (369, 'D061', NULL, '台式电脑', '办公设备', '2017-01-01', 0.00, NULL, 'I7-7700 3.60GHZ/显示器：明基XL2411Z', '组装机', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (370, 'D062', NULL, '台式电脑', '办公设备', '2018-01-01', 0.00, NULL, 'I5-8500 3GHz/显示器：明基XL2411P', '组装机', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (371, 'D063', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'I5-8500 3HZ/显示器：明基XL2411P', '组装机', NULL, 'C308A', '2台显示器', 110, NULL);
INSERT INTO `cmc_device` VALUES (372, 'D064', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'I5-8500 3HZ/显示器：明基XL2411P', '组装机', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (373, 'D065', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'I5-8500 3HZ/显示器：明基XL2411P 冠捷24B1', '组装机', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (374, 'D066', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'I5-8500 3HZ/显示器：明基XL2411P', '组装机', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (375, 'D067', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'I5-8500 3HZ/显示器：明基XL2411P', '组装机', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (376, 'D068', NULL, '台式电脑', '办公设备', '2019-01-01', 0.00, NULL, 'I5-8500 3HZ/显示器：明基XL2420-B', '组装机', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (377, 'D069', NULL, '台式电脑', '办公设备', '2019-01-01', 0.00, NULL, 'I5-8500 3HZ/显示器：明基XL2411P', '组装机', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (378, 'D070', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'I5-4570 3.2GHZ/显示器：明基XL2411P', '组装机', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (379, 'D071', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'I7-6700K 4HZ/显示器：华硕VG248', '组装机', NULL, 'C308A', '原郑锦艺使用', 110, NULL);
INSERT INTO `cmc_device` VALUES (380, 'D072', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'I5-8500 3HZ/显示器：明基XL2411P', '组装机', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (381, 'D073', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'I5-8500 3Hz/显示器：明基XL2411P', '组装机', NULL, 'C308A', '服务器', 110, NULL);
INSERT INTO `cmc_device` VALUES (382, 'D074', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'I5-8500 3Hz/显示器：明基XL2411P', '组装机', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (383, 'D075', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'I5-6700 3HZ/显示器：DELL P2414H', '组装机', NULL, 'C308A', '原郭火元使用', 110, NULL);
INSERT INTO `cmc_device` VALUES (384, 'D076', NULL, '台式电脑', '办公设备', '2010-01-01', 0.00, NULL, '主机华硕/显示器：DELL E2316HFf', '华硕组装机', NULL, 'C311', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (385, 'D077', NULL, '台式电脑', '办公设备', '2018-01-01', 0.00, NULL, '主机optiplex 3020/显示器：DELL E2316HFf', '戴尔', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (386, 'D079', NULL, '台式电脑', '办公设备', '2017-01-01', 0.00, NULL, '/', '组装机', NULL, '二滩监测项目部', '', 112, NULL);
INSERT INTO `cmc_device` VALUES (387, 'D080', NULL, '台式电脑', '办公设备', '2022-06-20', 5380.00, NULL, 'ThinkCentre E97/显示器：F20238FS0', '联想', NULL, 'C304A', '', 113, NULL);
INSERT INTO `cmc_device` VALUES (388, 'D081', NULL, '台式电脑', '办公设备', '2022-03-01', 5380.00, NULL, 'ThinkCentre E97/显示器：F20238FS0 ', '联想', NULL, 'C304A', '', 113, NULL);
INSERT INTO `cmc_device` VALUES (389, 'D082', NULL, '台式电脑', '办公设备', '2022-03-01', 5380.00, NULL, 'ThinkCentre E97/显示器：F20238FS0', '联想', NULL, 'C304A', '', 113, NULL);
INSERT INTO `cmc_device` VALUES (390, 'D083', NULL, '台式电脑', '办公设备', '2022-03-01', 5380.00, NULL, 'ThinkCentre E97/显示器：F20238FS0', '联想', NULL, 'C304A', '', 113, NULL);
INSERT INTO `cmc_device` VALUES (391, 'D084', NULL, '台式电脑', '办公设备', '2022-03-01', 5380.00, NULL, 'ThinkCentre E97/显示器：F20238FS0', '联想', NULL, 'C304A', '', 113, NULL);
INSERT INTO `cmc_device` VALUES (392, 'D085', NULL, '台式电脑', '办公设备', '2022-03-01', 5380.00, NULL, 'ThinkCentre E97/显示器：F20238FS0', '联想', NULL, 'C304A', '', 113, NULL);
INSERT INTO `cmc_device` VALUES (393, 'D086', NULL, '台式电脑', '办公设备', '2022-03-01', 5380.00, NULL, 'ThinkCentre E77/显示器：F20238FL0', '联想', NULL, 'C304A', '', 113, NULL);
INSERT INTO `cmc_device` VALUES (394, 'D087', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'OptiPlex 7050', '戴尔', NULL, '金川测量中心', '', 203, NULL);
INSERT INTO `cmc_device` VALUES (395, 'D088', NULL, '台式电脑', '办公设备', '2019-01-01', 0.00, NULL, 'OptiPlex 7050', '戴尔', NULL, '金川测量中心', '', 203, NULL);
INSERT INTO `cmc_device` VALUES (396, 'D089', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'OptiPlex 7050', '戴尔', NULL, '金川测量中心', '', 203, NULL);
INSERT INTO `cmc_device` VALUES (397, 'D090', NULL, '台式电脑', '办公设备', '2021-01-01', 0.00, NULL, '灵越3880/3881酷睿十代I5-10400', '戴尔', NULL, '巴拉测量中心', '', 204, NULL);
INSERT INTO `cmc_device` VALUES (398, 'D091', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '成就3881/3671酷睿十代I7-10800', '戴尔', NULL, '巴拉测量中心', '', 204, NULL);
INSERT INTO `cmc_device` VALUES (399, 'D092', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'Intel(R)Core(TM)I5-8400', '戴尔', NULL, '双江口测量中心', '', 202, NULL);
INSERT INTO `cmc_device` VALUES (400, 'D093', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'Intel(R)Core(TM)I5-8400', '戴尔', NULL, '双江口测量中心', '', 202, NULL);
INSERT INTO `cmc_device` VALUES (401, 'D094', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'Intel(R)Core(TM)I5-4590', '戴尔', NULL, '双江口测量中心', '', 202, NULL);
INSERT INTO `cmc_device` VALUES (402, 'D095', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, '两河口测量中心', '', 201, NULL);
INSERT INTO `cmc_device` VALUES (403, 'D096', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, '两河口测量中心', '', 201, NULL);
INSERT INTO `cmc_device` VALUES (404, 'D097', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, '两河口测量中心', '', 201, NULL);
INSERT INTO `cmc_device` VALUES (405, 'D098', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, '两河口测量中心', '', 201, NULL);
INSERT INTO `cmc_device` VALUES (406, 'D099', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, '两河口测量中心', '', 201, NULL);
INSERT INTO `cmc_device` VALUES (407, 'D100', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, '两河口测量中心', '', 201, NULL);
INSERT INTO `cmc_device` VALUES (408, 'D101', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, '两河口测量中心', '故障未使用', 201, NULL);
INSERT INTO `cmc_device` VALUES (409, 'D101-1', NULL, '台式电脑', '办公设备', '2022-05-30', 5299.01, NULL, NULL, NULL, NULL, '两河口测量中心', '故障未使用', 201, NULL);
INSERT INTO `cmc_device` VALUES (410, 'D102', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, NULL, '华硕', NULL, '邻水项目部', '故障未使用', 106, NULL);
INSERT INTO `cmc_device` VALUES (411, 'D103', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, NULL, '戴尔', NULL, '邻水项目部', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (412, 'D104', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, NULL, '戴尔', NULL, '邻水项目部', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (413, 'D105', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '清华同方Q87-M1/显示器EM2470W', '清华同方', NULL, '邻水项目部', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (414, 'D106', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '华硕System Product Name/显示器：E2314HF', '华硕/戴尔', NULL, '邻水项目部', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (415, 'D107', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '华硕System Product Name/显示器：E2318H', '华硕/戴尔', NULL, '邻水项目部', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (416, 'D108', NULL, '台式电脑', '办公设备', '2021-01-01', 0.00, NULL, '商祺SQX4270 660N/显示器：N238VA ', '宏基', NULL, '重庆分公司', '', 114, NULL);
INSERT INTO `cmc_device` VALUES (417, 'D109', NULL, '台式电脑', '办公设备', '2021-01-01', 0.00, NULL, '商祺SQX4270 660N/显示器：N238VA ', '宏基', NULL, '重庆分公司', '按5000标准配置', 114, NULL);
INSERT INTO `cmc_device` VALUES (418, 'D110', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'B360 HD3', '组装机（SAIVIA）', NULL, '德方子公司', '', 115, NULL);
INSERT INTO `cmc_device` VALUES (419, 'D111', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, '/', '组装机（SAIVIA)', NULL, '德方子公司', '', 115, NULL);
INSERT INTO `cmc_device` VALUES (420, 'D112', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, 'SyncMaster E1920', '三星', NULL, 'C302', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (421, 'D113', NULL, '台式电脑', '办公设备', NULL, 0.00, NULL, NULL, '戴尔', NULL, 'C302', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (422, 'D114', NULL, '台式电脑', '办公设备', '2023-07-10', 13050.00, NULL, '华硕组装机', '华硕', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (423, 'D115', NULL, '台式电脑', '办公设备', '2023-07-10', 13050.00, NULL, '华硕组装机', '华硕', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (424, 'D116', NULL, '台式电脑', '办公设备', '2023-07-10', 13050.00, NULL, '华硕组装机', '华硕', NULL, 'C308A', '彩印', 110, NULL);
INSERT INTO `cmc_device` VALUES (425, 'D86-1', NULL, '台式电脑', '办公设备', '2022-10-26', 8960.00, NULL, '扬天T4900KS 10700 8G 1Tssd GTX1660-6G Win11', '联想', NULL, 'C304A', '彩印', 113, NULL);
INSERT INTO `cmc_device` VALUES (426, 'DYJ01', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP Smart Tank 531', '惠普', NULL, 'C308A', '彩印，原打印机HP officejet Pro 8600 Plus不能正常使用，2022.12.14换新', 110, NULL);
INSERT INTO `cmc_device` VALUES (427, 'DYJ02', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP Officejet 7612', '惠普', NULL, 'C306', '彩印', 101, NULL);
INSERT INTO `cmc_device` VALUES (428, 'DYJ03', NULL, '打印机', '办公设备', '2022-12-14', 860.00, NULL, 'HP2722', '惠普', NULL, 'C319', '彩印', 101, NULL);
INSERT INTO `cmc_device` VALUES (429, 'DYJ04', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'Canon MG 3680', '佳能', NULL, 'C316', '黑白\r\n', 101, NULL);
INSERT INTO `cmc_device` VALUES (430, 'DYJ05', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP officejet pro 8100', '惠普', NULL, 'C316A', '彩印', 101, NULL);
INSERT INTO `cmc_device` VALUES (431, 'DYJ07', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet P1008', '惠普', NULL, 'C313', '黑白\r\n', 112, NULL);
INSERT INTO `cmc_device` VALUES (432, 'DYJ08', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'EPSON L655', '爱普生', NULL, 'C318', '黑白', 102, NULL);
INSERT INTO `cmc_device` VALUES (433, 'DYJ09', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet Pro 400 M401d', '惠普', NULL, 'C307', '彩印', 102, NULL);
INSERT INTO `cmc_device` VALUES (434, 'DYJ10', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet Pro 400 M401d', '惠普', NULL, 'C307', '黑白', 102, NULL);
INSERT INTO `cmc_device` VALUES (435, 'DYJ11', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP Office Jet pro 8720', '惠普', NULL, 'C303B', '黑白', 104, NULL);
INSERT INTO `cmc_device` VALUES (436, 'DYJ12', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet Pro M203d', '惠普', NULL, 'C303B', '彩印', 104, NULL);
INSERT INTO `cmc_device` VALUES (437, 'DYJ13', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet Pro 400 M401d', '惠普', NULL, 'C0204', '彩印', 104, NULL);
INSERT INTO `cmc_device` VALUES (438, 'DYJ14', NULL, '打印机', '办公设备', '2019-07-01', 0.00, NULL, 'HP Office Jet Pro 8720', '惠普', NULL, 'C219', '彩印', 104, NULL);
INSERT INTO `cmc_device` VALUES (439, 'DYJ15', NULL, '打印机', '办公设备', '2019-07-01', 0.00, NULL, 'HP Color Laser Jet Pro MFP M281', '惠普', NULL, 'C212', '彩印', 105, NULL);
INSERT INTO `cmc_device` VALUES (440, 'DYJ16', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP Office Jet Pro 8720', '惠普', NULL, 'C317', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (441, 'DYJ17', NULL, '打印机', '办公设备', NULL, 0.00, NULL, '爱普生EPSON L805', 'EPSON', NULL, 'C317', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (442, 'DYJ18', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'M101', 'EPSON', NULL, 'C317', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (443, 'DYJ19', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'M101', 'EPSON', NULL, 'C304', '黑白', 106, NULL);
INSERT INTO `cmc_device` VALUES (444, 'DYJ20', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'LQ-630K', 'EPSON', NULL, 'C304', '黑白', 106, NULL);
INSERT INTO `cmc_device` VALUES (445, 'DYJ21', NULL, '打印机', '办公设备', '2019-01-01', 0.00, NULL, 'HP Laser Jet Pro MFP M227FDW', '惠普', NULL, 'C303', '黑白', 106, NULL);
INSERT INTO `cmc_device` VALUES (446, 'DYJ22', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet Pro 400 M401d', '惠普', NULL, 'C310', '', 107, NULL);
INSERT INTO `cmc_device` VALUES (447, 'DYJ23', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet P2055d', '惠普', NULL, 'C310', '黑白', 108, NULL);
INSERT INTO `cmc_device` VALUES (448, 'DYJ23-1', NULL, '打印机', '办公设备', '2023-02-15', 2689.00, NULL, 'EPSON L6279', '爱普生', NULL, 'C310', '黑白', 108, NULL);
INSERT INTO `cmc_device` VALUES (449, 'DYJ24', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet P2015d', '惠普', NULL, 'C308', '黑白，E座搬家协调留下', 109, NULL);
INSERT INTO `cmc_device` VALUES (450, 'DYJ25', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet Pro M403d', '惠普', NULL, 'C308', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (451, 'DYJ26', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet Pro 400 M401d', '惠普', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (452, 'DYJ26-1', NULL, '打印机', '办公设备', '2023-02-06', 2499.00, NULL, 'HP M128FW', '惠普', NULL, '航测遥感中心', '2台', 110, NULL);
INSERT INTO `cmc_device` VALUES (453, 'DYJ27', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP Laser Jet Pro MFP M227FDW', '惠普', NULL, 'C311', '黑白', 111, NULL);
INSERT INTO `cmc_device` VALUES (454, 'DYJ28', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet Pro M203DW', '惠普', NULL, 'C311', '黑白', 111, NULL);
INSERT INTO `cmc_device` VALUES (455, 'DYJ28-1', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet P1008', '惠普', NULL, 'C311', '黑白', 109, NULL);
INSERT INTO `cmc_device` VALUES (456, 'DYJ28-2', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet P1008', '惠普', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (457, 'DYJ28-3', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet P2055d', '惠普', NULL, 'C311', '', 111, NULL);
INSERT INTO `cmc_device` VALUES (458, 'DYJ29', NULL, '打印机', '办公设备', '2012-01-01', 0.00, NULL, 'HP LaserJet P2055', '惠普', NULL, 'C313', '黑白', 112, NULL);
INSERT INTO `cmc_device` VALUES (459, 'DYJ30', NULL, '打印机', '办公设备', '2014-01-01', 0.00, NULL, 'HP LaserJet Pro 400 M401d', '惠普', NULL, 'C313', '', 112, NULL);
INSERT INTO `cmc_device` VALUES (460, 'DYJ31', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet 1320', '惠普', NULL, 'C313', '彩印，这台打印机出现故障，已于2022.12.06配新彩色打印机', 112, NULL);
INSERT INTO `cmc_device` VALUES (461, 'DYJ31-1', '工程监测中心', '打印机', '办公设备', '2023-12-25', 2500.00, NULL, 'HP Laser Jet Pro MFP 3104fdw', '惠普', NULL, NULL, '黑白', 112, NULL);
INSERT INTO `cmc_device` VALUES (462, 'DYJ32', NULL, '打印机', '办公设备', '2017-01-01', 0.00, NULL, 'L4160', '爱普生', NULL, '二滩监测项目部', '彩印', 112, NULL);
INSERT INTO `cmc_device` VALUES (463, 'DYJ33', NULL, '打印机', '办公设备', '2017-01-01', 0.00, NULL, 'HP LaserJet MFP-M231', '惠普', NULL, '二滩监测项目部', '', 112, NULL);
INSERT INTO `cmc_device` VALUES (464, 'DYJ33-1', NULL, '打印机', '办公设备', '2022-12-01', 3997.00, NULL, 'EPSON--L6468', '爱普生', NULL, '二滩监测项目部', '', 112, NULL);
INSERT INTO `cmc_device` VALUES (465, 'DYJ34', NULL, '打印机', '办公设备', '2022-03-01', 6190.00, NULL, 'bizhub 205i', 'Konica Minolta', NULL, 'C304A', '', 113, NULL);
INSERT INTO `cmc_device` VALUES (466, 'DYJ35', NULL, '打印机', '办公设备', '2019-01-01', 0.00, NULL, 'MP2014D', '理光', NULL, '金川测量中心', '', 203, NULL);
INSERT INTO `cmc_device` VALUES (467, 'DYJ36', NULL, '打印机', '办公设备', '2021-01-01', 0.00, NULL, 'DCP-71950W', 'Brother', NULL, '巴拉测量中心', '', 204, NULL);
INSERT INTO `cmc_device` VALUES (468, 'DYJ37', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP P2015d', '惠普', NULL, '双江口测量中心', '', 202, NULL);
INSERT INTO `cmc_device` VALUES (469, 'DYJ38', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'STUDIO167', '松下', NULL, '双江口测量中心', '', 202, NULL);
INSERT INTO `cmc_device` VALUES (470, 'DYJ39', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP LaserJet P2055', '惠普', NULL, '两河口测量中心', '', 201, NULL);
INSERT INTO `cmc_device` VALUES (471, 'DYJ40', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'MF4550d', '佳能', NULL, '两河口测量中心', '', 201, NULL);
INSERT INTO `cmc_device` VALUES (472, 'DYJ41', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'R330', '爱普生', NULL, '两河口测量中心', '', 201, NULL);
INSERT INTO `cmc_device` VALUES (473, 'DYJ42', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP7730', '惠普', NULL, '重庆分公司', '', 114, NULL);
INSERT INTO `cmc_device` VALUES (474, 'DYJ43', NULL, '打印机', '办公设备', NULL, 0.00, NULL, '136W', '惠普', NULL, '重庆分公司', '', 114, NULL);
INSERT INTO `cmc_device` VALUES (475, 'DYJ44', NULL, '打印机', '办公设备', NULL, 0.00, NULL, 'HP Office Jet 7110', '惠普', NULL, 'C302', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (476, 'DYJ45', 'A90H081142809', '打印机', '办公设备', '2023-08-29', 11600.00, NULL, 'bizhub C226', '柯尼卡美能达', NULL, 'C212接待室', '', 105, NULL);
INSERT INTO `cmc_device` VALUES (477, 'G001', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C320', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (478, 'G002', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C319', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (479, 'G003', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C306', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (480, 'G004', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C316', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (481, 'G005', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C316A', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (482, 'G006', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C305', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (483, 'G007', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C313', '', 112, NULL);
INSERT INTO `cmc_device` VALUES (484, 'G008', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C318', '2组', 102, NULL);
INSERT INTO `cmc_device` VALUES (485, 'G009', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C307', '9组', 102, NULL);
INSERT INTO `cmc_device` VALUES (486, 'G010', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C307', '8组', 102, NULL);
INSERT INTO `cmc_device` VALUES (487, 'G011', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C303B C204 C219', '4组', 104, NULL);
INSERT INTO `cmc_device` VALUES (488, 'G012', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C212', '6组', 105, NULL);
INSERT INTO `cmc_device` VALUES (489, 'G013', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C304 C317', '4组', 106, NULL);
INSERT INTO `cmc_device` VALUES (490, 'G014', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C303 C310', '6组', 106, NULL);
INSERT INTO `cmc_device` VALUES (491, 'G015', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C310', '7组', 107, NULL);
INSERT INTO `cmc_device` VALUES (492, 'G016', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C308', '7组', 109, NULL);
INSERT INTO `cmc_device` VALUES (493, 'G017', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (494, 'G018', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C311', '20组', 111, NULL);
INSERT INTO `cmc_device` VALUES (495, 'G019', NULL, '文件柜', '办公设备', '2019-01-01', 0.00, NULL, NULL, NULL, NULL, '金川测量中心', '33组', 203, NULL);
INSERT INTO `cmc_device` VALUES (496, 'G020', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, '两河口测量中心', '8组（2大 6小）', 201, NULL);
INSERT INTO `cmc_device` VALUES (497, 'G021', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C302', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (498, 'G022', NULL, '文件柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C304A', '', 113, NULL);
INSERT INTO `cmc_device` VALUES (499, 'G023', NULL, '茶水柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C301门口', '1套', 104, NULL);
INSERT INTO `cmc_device` VALUES (500, 'G024', NULL, '茶水柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C212门口', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (501, 'GF01', NULL, '功放系统', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C216', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (502, 'GF02', NULL, '功放系统', '办公设备', '2020-01-01', 0.00, NULL, NULL, NULL, NULL, '通讯室', '8把', 104, NULL);
INSERT INTO `cmc_device` VALUES (503, 'HTY01', NULL, '绘图仪', '办公设备', NULL, 0.00, NULL, 'T795', '惠普', NULL, 'C311', '（16+20）把', 111, NULL);
INSERT INTO `cmc_device` VALUES (504, 'HYY01', NULL, '会议椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C306A', '9把', 104, NULL);
INSERT INTO `cmc_device` VALUES (505, 'HYY02', NULL, '会议椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C301会议室', '（19+16）把', 104, NULL);
INSERT INTO `cmc_device` VALUES (506, 'HYY03', NULL, '会议椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C212', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (507, 'HYY04', NULL, '会议椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C216', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (508, 'HYZ01', NULL, '会议桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C306A', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (509, 'HYZ02', NULL, '会议桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C301会议室', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (510, 'HYZ03', NULL, '会议桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C212', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (511, 'HYZ04', NULL, '会议桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C216', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (512, 'JG01', NULL, '机柜', '办公设备', NULL, 0.00, NULL, NULL, '大唐保镖', NULL, '通讯室', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (513, 'JG02', NULL, '机柜', '办公设备', '2023-01-01', 0.00, NULL, NULL, '大唐保镖', NULL, 'C216', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (514, 'JG03', NULL, '机柜', '办公设备', '2023-03-01', 1950.00, NULL, NULL, '大唐保镖', NULL, 'C302', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (515, 'JHJ01', NULL, '交换机', '办公设备', '2023-03-01', 669.00, NULL, NULL, '华三（H3C）', NULL, 'C302', '10台', 109, NULL);
INSERT INTO `cmc_device` VALUES (516, 'JHQ01', NULL, '空气净化器', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C306', '14台', 101, NULL);
INSERT INTO `cmc_device` VALUES (517, 'JMDN1', NULL, '建模集群电脑', '办公设备', NULL, 0.00, NULL, '/', '组装', NULL, 'C308', '3.5寸SATA盘位8个（已使用8个）', 108, NULL);
INSERT INTO `cmc_device` VALUES (518, 'JMDN2', NULL, '建模集群电脑', '办公设备', NULL, 0.00, NULL, '/', '组装', NULL, 'C308', '6台', 108, NULL);
INSERT INTO `cmc_device` VALUES (519, 'JQFWQ01', NULL, '集群服务器', '办公设备', NULL, 0.00, NULL, 'T340', '戴尔', NULL, 'C208', '3.5寸SATA盘位12个（已使用12个）', 108, NULL);
INSERT INTO `cmc_device` VALUES (520, 'KT01', NULL, '空调', '办公设备', '2022-01-01', 0.00, NULL, 'KFR-35GW/BDN8Y-AG400(3)A', '美的', NULL, '二滩监测项目部', '2.5寸SATA盘位4个（已使用0个，剩余4个）\r\n3.5寸SATA盘位12个（已使用12个）', 112, NULL);
INSERT INTO `cmc_device` VALUES (521, 'NASFWQ01', NULL, '网络存储服务器', '办公设备', '2018-08-01', 0.00, NULL, 'TS-1232XU', '威联通', NULL, 'C208', '', 108, NULL);
INSERT INTO `cmc_device` VALUES (522, 'NASFWQ02', NULL, '网络存储服务器', '办公设备', '2018-09-01', 0.00, NULL, NULL, '威联通', NULL, 'C302', '3.5寸SATA盘位12个（已使用10个，剩余2个）', 109, NULL);
INSERT INTO `cmc_device` VALUES (523, 'NASFWQ03', NULL, '网络存储服务器', '办公设备', '2021-01-01', 0.00, NULL, 'DS418', '群晖', NULL, '重庆分公司', 'm.2盘位2个（已使用2个）\r\n2.5寸U.2盘位24个（已使用12个，剩余12个）', 114, NULL);
INSERT INTO `cmc_device` VALUES (524, 'NASFWQ04', NULL, '网络存储服务器', '办公设备', '2023-03-01', 11000.00, NULL, 'TS-1232P', '威联通', NULL, 'C302', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (525, 'NASFWQ05', NULL, '网络存储服务器', '办公设备', '2023-04-13', 31960.00, NULL, 'NF5280M6', '浪潮', NULL, 'C208', '', 108, NULL);
INSERT INTO `cmc_device` VALUES (526, 'NASFWQ06', NULL, '网络存储服务器', '办公设备', '2023-10-18', 20176.99, NULL, 'Fusion Server 5288 V5', 'Fusion Server', NULL, 'C208', '', 108, NULL);
INSERT INTO `cmc_device` VALUES (527, 'OAFWQ01', NULL, 'OA服务器', '办公设备', NULL, 0.00, NULL, '/', '戴尔', NULL, 'C308', '', 108, NULL);
INSERT INTO `cmc_device` VALUES (528, 'SF01', NULL, '沙发', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C320', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (529, 'SF02', NULL, '沙发', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C319', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (530, 'SF03', NULL, '沙发', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C306', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (531, 'SF04', NULL, '沙发', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C316', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (532, 'SF05', NULL, '沙发', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C316A', '2个', 101, NULL);
INSERT INTO `cmc_device` VALUES (533, 'SF06', NULL, '沙发', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C305', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (534, 'SF07', NULL, '沙发', '办公设备', '2020-01-01', 0.00, NULL, NULL, NULL, NULL, 'C313', '', 112, NULL);
INSERT INTO `cmc_device` VALUES (535, 'SF08', NULL, '沙发', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C318', '', 102, NULL);
INSERT INTO `cmc_device` VALUES (536, 'SF09', NULL, '沙发', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C307', '', 102, NULL);
INSERT INTO `cmc_device` VALUES (537, 'SF10', NULL, '沙发', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C307', '', 102, NULL);
INSERT INTO `cmc_device` VALUES (538, 'SF11', NULL, '沙发', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C212', '17个', 103, NULL);
INSERT INTO `cmc_device` VALUES (539, 'SG01', NULL, '书柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C301会议室', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (540, 'SLD01', NULL, '塑料凳', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C301会议室', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (541, 'SZJ01', NULL, '碎纸机', '办公设备', '2021-08-01', 0.00, NULL, 'A-88M', '科密', NULL, 'C212', '', 105, NULL);
INSERT INTO `cmc_device` VALUES (542, 'SZJ02', NULL, '碎纸机', '办公设备', NULL, 0.00, NULL, 'AEQ918H0', '晨光', NULL, '重庆分公司', '', 114, NULL);
INSERT INTO `cmc_device` VALUES (543, 'UPS01', NULL, 'UPS', '办公设备', '2023-03-01', 3910.00, NULL, NULL, '三特C3KR', NULL, 'C302', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (544, 'XDG01', NULL, '消毒柜', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C306', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (545, 'XDG02', NULL, '消毒柜', '办公设备', NULL, 0.00, NULL, NULL, '美的', NULL, 'C301会议室', '', 104, NULL);
INSERT INTO `cmc_device` VALUES (546, 'XSQ01', NULL, '显示器', '办公设备', NULL, 0.00, NULL, 'P2414Hb', 'DELL', NULL, 'C308A', '', 110, NULL);
INSERT INTO `cmc_device` VALUES (547, 'XSQ02', NULL, '显示器', '办公设备', NULL, 0.00, NULL, 'E2314HF ', '戴尔', NULL, '邻水项目部', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (548, 'XSQ03', NULL, '显示器', '办公设备', NULL, 0.00, NULL, 'E2314HF ', '戴尔', NULL, '邻水项目部', '', 106, NULL);
INSERT INTO `cmc_device` VALUES (549, 'XSQ04', NULL, '显示器', '办公设备', NULL, 0.00, NULL, 'E2314HF ', '戴尔', NULL, '邻水项目部', '4把', 106, NULL);
INSERT INTO `cmc_device` VALUES (550, 'Y001', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C320', '3把', 101, NULL);
INSERT INTO `cmc_device` VALUES (551, 'Y002', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C319', '3把', 101, NULL);
INSERT INTO `cmc_device` VALUES (552, 'Y003', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C306', '2把', 101, NULL);
INSERT INTO `cmc_device` VALUES (553, 'Y004', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C316', '2把', 101, NULL);
INSERT INTO `cmc_device` VALUES (554, 'Y005', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C316A', '2把', 101, NULL);
INSERT INTO `cmc_device` VALUES (555, 'Y006', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C305', '10把', 101, NULL);
INSERT INTO `cmc_device` VALUES (556, 'Y007', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C313', '3把', 112, NULL);
INSERT INTO `cmc_device` VALUES (557, 'Y008', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C318', '2把', 102, NULL);
INSERT INTO `cmc_device` VALUES (558, 'Y009', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C307', '3把', 102, NULL);
INSERT INTO `cmc_device` VALUES (559, 'Y010', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C307', '8把', 102, NULL);
INSERT INTO `cmc_device` VALUES (560, 'Y011', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C303B', '8把', 104, NULL);
INSERT INTO `cmc_device` VALUES (561, 'Y012', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C212', '13把', 105, NULL);
INSERT INTO `cmc_device` VALUES (562, 'Y013', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C304 C317', '11把', 106, NULL);
INSERT INTO `cmc_device` VALUES (563, 'Y014', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C303 C310', '13把', 106, NULL);
INSERT INTO `cmc_device` VALUES (564, 'Y015', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C308', '31把', 109, NULL);
INSERT INTO `cmc_device` VALUES (565, 'Y016', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C308A', '7把', 110, NULL);
INSERT INTO `cmc_device` VALUES (566, 'Y017', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C311', '5把', 111, NULL);
INSERT INTO `cmc_device` VALUES (567, 'Y018', NULL, '办公椅', '办公设备', '2019-01-01', 0.00, NULL, NULL, NULL, NULL, '金川测量中心', '7把', 203, NULL);
INSERT INTO `cmc_device` VALUES (568, 'Y019', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, '两河口测量中心', '4把', 201, NULL);
INSERT INTO `cmc_device` VALUES (569, 'Y020', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, '重庆分公司', '2把', 114, NULL);
INSERT INTO `cmc_device` VALUES (570, 'Y021', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C302', '3把', 109, NULL);
INSERT INTO `cmc_device` VALUES (571, 'Y022', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C212', '3把', 103, NULL);
INSERT INTO `cmc_device` VALUES (572, 'Y023', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C212', '10把', 105, NULL);
INSERT INTO `cmc_device` VALUES (573, 'Y024', NULL, '办公椅', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C304A', '', 113, NULL);
INSERT INTO `cmc_device` VALUES (574, 'Z001', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C320', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (575, 'Z002', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C319', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (576, 'Z003', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C306', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (577, 'Z004', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C316', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (578, 'Z005', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C316A', '', 101, NULL);
INSERT INTO `cmc_device` VALUES (579, 'Z006', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C305', '10张', 101, NULL);
INSERT INTO `cmc_device` VALUES (580, 'Z007', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C313', '', 112, NULL);
INSERT INTO `cmc_device` VALUES (581, 'Z008', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C318', '', 102, NULL);
INSERT INTO `cmc_device` VALUES (582, 'Z009', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C307', '', 102, NULL);
INSERT INTO `cmc_device` VALUES (583, 'Z010', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C307', '9张', 102, NULL);
INSERT INTO `cmc_device` VALUES (584, 'Z011', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, '303B C0219', '8张', 104, NULL);
INSERT INTO `cmc_device` VALUES (585, 'Z012', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C212', '9张', 105, NULL);
INSERT INTO `cmc_device` VALUES (586, 'Z013', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C304 C317', '9张', 106, NULL);
INSERT INTO `cmc_device` VALUES (587, 'Z014', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C303 C310', '12张', 106, NULL);
INSERT INTO `cmc_device` VALUES (588, 'Z015', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C308', '32张', 109, NULL);
INSERT INTO `cmc_device` VALUES (589, 'Z016', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C308A', '10张', 110, NULL);
INSERT INTO `cmc_device` VALUES (590, 'Z017', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C311', '5张', 111, NULL);
INSERT INTO `cmc_device` VALUES (591, 'Z018', NULL, '办公桌', '办公设备', '2019-01-01', 0.00, NULL, NULL, NULL, NULL, '金川测量中心', '7张', 203, NULL);
INSERT INTO `cmc_device` VALUES (592, 'Z019', NULL, '办公桌', '办公设备', '2012-01-01', 0.00, NULL, NULL, NULL, NULL, '两河口测量中心', '2张', 201, NULL);
INSERT INTO `cmc_device` VALUES (593, 'Z020', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, '重庆分公司', '2张', 114, NULL);
INSERT INTO `cmc_device` VALUES (594, 'Z021', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C302', '', 109, NULL);
INSERT INTO `cmc_device` VALUES (595, 'Z022', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C212', '3张', 103, NULL);
INSERT INTO `cmc_device` VALUES (596, 'Z023', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C212', '10张', 105, NULL);
INSERT INTO `cmc_device` VALUES (597, 'Z024', NULL, '办公桌', '办公设备', NULL, 0.00, NULL, NULL, NULL, NULL, 'C304A', '', 113, NULL);
INSERT INTO `cmc_device` VALUES (598, 'ZLJ01', NULL, '制冷机', '办公设备', NULL, 0.00, NULL, NULL, '骆驼', NULL, 'C301会议室', '', 104, NULL);

-- ----------------------------
-- 28、cmc设备移交表
-- ----------------------------
drop table if exists `cmc_device_handover`;
create table `cmc_device_handover`  (
  `device_handover_id`	int		not null auto_increment comment '设备移交id',
  `device_id` 			int 			default null 	comment '设备id',
  `handover_dept_id` 	bigint 			default null 	comment '移交部门id',
  `handover_user_id` 	bigint 			default null 	comment '移交人id',
  `handover_date`		date			default null 	comment '移交日期',
  `receive_dept_id` 	bigint 			default null 	comment '接收部门id',
  `receive_user_id` 	bigint 			default null 	comment '接收人id',
  `description`			varchar(255)	default null 	comment '设备软件说明',
  `reason`				varchar(255)	default null 	comment '交接原因',
  `remark`				varchar(255)	default null 	comment '备注',
  primary key (`device_handover_id`)
) engine = innodb comment = 'cmc设备移交表';

-- ----------------------------
-- 初始化-设备移交表数据
-- ----------------------------

-- ----------------------------
-- 29、cmc设备审批表
-- ----------------------------
drop table if exists `cmc_device_approval`;
create table `cmc_device_approval`  (
  `device_apply_id`		char(19)		not null		comment '设备申请id',
  `applier`				bigint			default null	comment '申请人',
  `use_dept`			bigint			default null	comment '使用部门',
  `devices`				varchar(100)	default null	comment '设备id',
  `modify_devices`		varchar(100)	default null	comment '修改后设备id',
  `project_id`			char(19)		default null	comment '项目id',
  `apply_reason`		varchar(255)	default null 	comment '申领事由',
  `begin_date`			date			default null 	comment '开始日期',
  `end_date`			date			default null 	comment '结束日期',
  `days`				float			default null 	comment '天数',
  `manager_user_id`		bigint			default null 	comment '分管审批人',
  `manager_comment`		varchar(255)	default null 	comment '分管审批意见',
  `dispatcher`			bigint			default null	comment '调度员',
  `dispatch_comment`	varchar(255)	default null 	comment '调度审批意见',
  `estimate_cost`		decimal(10,2)	default null	comment '预计设备成本',
  `apply_date`			date			default null 	comment '申请日期',
  `confirm_date`		date			default null 	comment '确认日期',
  `return_date`			date			default null 	comment '归还日期',
  `repair_devices`		varchar(50)		default null 	comment '需维修设备id',
  `remark`				varchar(255)	default null 	comment '备注说明',
  `dept_time`			date			default null 	comment '部门审批时间',
  `manager_time`		date			default null 	comment '分管审批时间',
  `dispatch_time`		date			default null 	comment '调度审批时间',
  primary key (`device_apply_id`)
) engine = innodb comment = 'cmc设备审批表';

-- ----------------------------
-- 初始化-设备审批表数据
-- ----------------------------
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750001', NULL, 110, '31,92,93,91,85,47,113', '177,31,100,93,91,66,59', '1648881411159752705', '2023C08_孟底沟水电站2023年地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-09', '2023-02-11', NULL, NULL, NULL, NULL, '2023-02-10', '2023-02-10');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750002', 33, 107, '59,176', '59,154', '1648881410929065985', '2023C20_平昌抽水蓄能电站（苟家河库址）预可、可研阶段地形图测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-24', '2023-02-27', NULL, NULL, '一个花杆、一个基座', NULL, '2023-02-24', '2023-02-24');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750003', 35, 107, '63', '85,93', '1648881410849374209', '2023C25_大邑抽水蓄能水电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-03-09', '2023-03-13', NULL, NULL, NULL, NULL, '2023-03-10', '2023-03-10');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750004', 120, 204, '52', '70', '1648881411298164738', '2023W05_四川省脚木足河巴拉水电站工程测量中心技术服务(2023年)', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-03-10', '2023-03-18', NULL, NULL, NULL, NULL, '2023-03-14', '2023-03-14');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750005', 61, 111, '155,37', '200,86', '1648881413483397121', '2022C16_楞古水电站预可阶段测绘技术服务', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-04-06', '2022-04-07', NULL, NULL, NULL, NULL, '2022-04-06', '2022-04-06');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750006', 15, 115, '171', '170,161', '1648881413277876226', '2022C20_雅砻江公司盐源3#、8#地块光伏地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-04-16', NULL, NULL, NULL, NULL, NULL, '2022-04-18', '2022-04-18');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750007', 144, 115, '88,116,200,86,125,140', '87,88,116,200,125,140', '1648881412963303425', '2022W24_广西平那高速公路测量项目', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-06-06', NULL, NULL, NULL, NULL, NULL, '2022-06-08', '2022-06-08');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750008', NULL, 111, '76,77,82,176,177,133,199,139,165', '76,77,82,176,177,133,199,99,105', '1648881412346740737', '2022C62_东石岭抽水蓄能水电站地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-08-16', '2022-08-16', NULL, NULL, NULL, NULL, '2022-08-16', '2022-08-16');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750009', 145, 115, '176,152,153,4', '177,152,153,84', NULL, '天星坝项目飞行', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-09', '2022-11-16', NULL, NULL, NULL, NULL, '2022-11-11', '2022-11-14');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750010', 144, 115, '69,73,84,168,10,177,156', '69,73,84,10,108,165,47', '1648881412141219841', '2022C71_双江口水电站产卵场地形地类图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-11', NULL, NULL, NULL, NULL, NULL, '2022-11-11', '2022-11-14');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750011', 35, 107, '117', '73,177', '1648881413164630018', '2022C29_雅安市名山区百丈镇临溪河综合整治项目地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-21', '2022-11-21', NULL, NULL, NULL, NULL, '2022-11-21', '2022-11-21');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750012', 83, 111, '159,158,150,147,143,151,152,86,156,155,153,149,145,80', '88,98,158,150,147,143,151,152,156,149', '1648881414641025025', '2021C81_雅鲁藏布江下游JW梯级水电站测绘工作', NULL, NULL, NULL, 10, NULL, 17, '已发放', NULL, '2023-02-03', '2023-02-06', NULL, NULL, NULL, NULL, '2023-02-05', '2023-02-06');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750013', 34, 107, '46,168,100', '45,47,156,157,149,115', '1648881413181407233', '2022C28_广东省梅县九龙嶂、台山黄茅岗抽蓄电站规划阶段测绘工作', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-05-07', '2022-05-07', NULL, NULL, NULL, NULL, '2022-05-07', '2022-05-07');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750014', 113, NULL, '31,45,47', '31,16,45', '1648881413093326850', '2022W21_黄河干流若尔盖段应急处置项目竣工测量', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-05-23', '2022-06-01', NULL, NULL, NULL, NULL, '2022-05-24', '2022-05-24');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750015', 15, 115, '10,60,161,160,163,47', '160,163,76,82,9,146', '1648881412892000257', '2022C36_昌都卡瓦白庆抽水蓄能测绘工作', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-06-13', '2022-06-14', NULL, NULL, NULL, NULL, '2022-06-13', '2022-06-13');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750016', 102, 112, '49,53,54,55,60,52,56,201', '49,53,54,55,60,52,56,99', '1648881412493541377', '2022C59_大渡河老鹰岩一级水电站施工测量控制网设计、建网及首次观测', NULL, NULL, NULL, 10, '同意。', 17, '脚架增加4个，所有设备待发放', NULL, '2022-07-28', '2022-08-03', NULL, NULL, NULL, NULL, '2022-07-29', '2022-07-29');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750017', 55, 109, '18,31,140,99', '109,18,31,140', '1648881415412776962', '2021C56_老木孔航电枢纽工程地形图及断面测量', NULL, NULL, NULL, 10, '同意。', 17, '加上对中杆2根，脚架2个，基座2个，带觇牌棱镜与单棱镜各2个\n\n已全部发放', NULL, '2022-10-10', '2022-10-10', NULL, NULL, '协助成勘院对项目进行实地检查', NULL, '2022-10-10', '2022-10-10');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750018', 55, 109, '108', '110', '1648881415412776962', '2021C56_老木孔航电枢纽工程地形图及断面测量', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-10-11', '2022-10-11', NULL, NULL, '协助成勘院对项目进行实地检查', NULL, '2022-10-11', '2022-10-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750019', 95, 111, '101,107,193,194,201,120,99,105', '110,101,107,193,194,201,64,156', '1648881414641025025', '2021C81_雅鲁藏布江下游JW梯级水电站测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-10-29', '2022-11-01', NULL, NULL, NULL, NULL, '2022-10-31', '2022-10-31');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750020', 72, 111, '88,87,7,45,112', '108,7,158,163,61,4', '1648881411847618561', '2022C80_猴子岩外部供水及料场地形图测绘', NULL, NULL, NULL, 10, '同意。', NULL, '再加一台iRTK10 VATC13804231\n所领设备均已发放', NULL, '2022-11-28', NULL, NULL, NULL, NULL, NULL, '2022-11-29', NULL);
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750021', 83, 111, '78,65', '204,82', '1648881411235250178', '2023C05_ML及JW水电工程建设征地实物指标调查配合测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-28', '2023-03-05', NULL, NULL, NULL, NULL, '2023-02-28', '2023-02-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750022', 32, 107, '10', '92', '1648881410778071042', '2023C29_ML坝址实景三维模型及库区电子沙盘制作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-03-31', '2023-03-31', NULL, NULL, NULL, NULL, '2023-03-31', '2023-03-31');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750023', 73, 110, '159', '176', '1648881410899705858', '2023C24_岷江干流张坎航电枢纽工程界桩测设工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-04-04', '2023-04-04', NULL, NULL, NULL, NULL, '2023-04-04', '2023-04-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750024', 71, 110, '62,11,140,176', '62,101,140,113', '1648881410643853314', '2023W13_拉萨水环境项目测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-04-07', '2023-04-14', NULL, NULL, NULL, NULL, '2023-04-12', '2023-04-12');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750025', 149, 116, '10', '54', '1648881411348496386', '2023W09_国能四川阿水电力开发有限公司绰斯甲水电站工程测量中心技术服务（2023年）', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-04-10', '2023-04-11', NULL, NULL, NULL, NULL, '2023-04-11', '2023-04-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750026', 94, 111, '107,47,48,53,60,9,53', '46,47,48,53,60,110,6', '1648881412845862913', '2022C39_奔戈、南桠光伏发电项目地形图测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-06-13', '2022-06-13', NULL, NULL, '棱镜2个、对中杆4根、脚架6副、对讲机5套。', NULL, '2022-06-13', '2022-06-13');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750027', 63, NULL, NULL, NULL, '1648881412753588225', '2022C46_猴子岩水电站取水口及水厂新址1:500地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-06-20', '2022-06-20', NULL, NULL, NULL, NULL, '2022-06-20', '2022-06-20');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750028', 94, 111, '47,48,45,10,50', '47,48,45,87,101', '1648881412845862913', '2022C39_奔戈、南桠光伏发电项目地形图测绘工作', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-07-01', NULL, NULL, NULL, '脚架4个、棱镜2个、对中杆1根。', NULL, '2022-07-01', '2022-07-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750029', 83, 111, '34,75,140,89', '75,140,114,140', '1648881412443209730', '2022W27_G4216线屏山新市至金阳段永善支线基础控制测量及地形图测绘项目', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2022-10-18', '2022-10-18', NULL, NULL, '协助成都院完成溪洛渡两处码头的水下地形测量工作。', NULL, '2022-10-18', '2022-10-18');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750030', NULL, 111, '77,83,100', '77,83,100', '1648881412346740737', '2022C62_东石岭抽水蓄能水电站地形图测绘', NULL, NULL, NULL, 10, '用于协助成勘院勘察中心溪洛渡翻滚码头测量。\n同意。', NULL, NULL, NULL, '2022-10-08', '2022-10-08', NULL, NULL, NULL, NULL, '2022-10-08', NULL);
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750031', 120, 202, NULL, NULL, '1648881414066405377', '2021W41_四川大渡河双江口水电站枢纽工程施工测量控制网复测（2021年）', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-10-13', '2022-11-23', NULL, NULL, NULL, NULL, '2022-10-13', '2022-10-13');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750032', 71, 111, '154,87', '145,86', '1648881411885367297', '2022C79_泸州市龙马潭区金龙胡市片区现代农业产业园区1:2000地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2022-12-27', '2022-12-29', NULL, NULL, NULL, NULL, '2022-12-28', '2022-12-29');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750033', NULL, 111, '6,141,100,160,65,64,61,110', '134,61,10,65,11,133,140,177', '1648881414095765505', '2022W01_雅砻江桐子林水电站水库泥沙断面测量（2022年）', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-02-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750034', NULL, 111, '101,10,153', '101,166,10,130', '1648881410572550145', '2023C36_龚嘴水电站鱼道工程渣场地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-04-11', NULL, NULL, NULL, NULL, NULL, '2023-04-12', '2023-04-12');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750035', 33, 107, '10,168', '85,63', '1648881410660630529', '2023C34_阆中抽水蓄能电站规划阶段测绘工作', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-03-31', '2023-04-03', NULL, NULL, '棱镜2个、对中杆1个、高原气压表1个、脚架3个、基座2个。', NULL, '2023-03-31', '2023-03-31');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750036', 71, 110, '177', '177', '1648881410643853314', '2023W13_拉萨水环境项目测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-05-09', '2023-05-09', NULL, NULL, NULL, NULL, '2023-05-09', '2023-05-09');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750037', NULL, 111, '18,159,16,139,167', '159,100,11,106,98', '1648881411499491384', '2023C44_老木孔水电站库区道路边沟坐标高程测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-05-16', '2023-05-19', NULL, NULL, NULL, NULL, '2023-05-16', '2023-05-16');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750038', 83, 111, '120,46,47,48,45,75,84,114,113,171', '120,46,47,48,45,75,84,114,113,123', '1648881412443209730', '2022W27_G4216线屏山新市至金阳段永善支线基础控制测量及地形图测绘项目', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-07-26', '2022-07-27', NULL, NULL, NULL, NULL, '2022-07-26', '2022-07-27');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750039', 94, 111, '31', '53,65', '1648881413114298369', '2022C32_龚嘴电站鱼道工程渣场地形图测量', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-06-28', '2022-06-28', NULL, NULL, '现场交点使用。', NULL, '2022-06-28', '2022-06-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750040', 94, 111, '100,102,103,146,147,156,151,10,151', '102,172,146,147,156,10,64,151', '1648881415412776962', '2021C56_老木孔航电枢纽工程地形图及断面测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-10-17', '2022-10-18', NULL, NULL, '脚架2副、棱镜2个、对中杆4根。', NULL, '2022-10-17', '2022-10-17');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750041', 101, 112, NULL, NULL, '1648881413844107265', '2022W07_大渡河猴子岩水电站外部变形监测工程（2022年）', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-10-07', '2022-10-10', NULL, NULL, '抽风式干湿温度计领了4个，有3个都是坏的，带到工地去自行修理，不确定能否修好。如能修好将把多余的带回来归还。', NULL, '2022-10-08', '2022-10-08');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750042', 71, 111, '4,108', '102,9', '1648881413093326850', '2022W21_黄河干流若尔盖段应急处置项目竣工测量', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-10-10', '2022-10-11', NULL, NULL, NULL, NULL, '2022-10-11', '2022-10-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750043', 145, 111, '132,186,168,88,168,198', '61,186,168,61,168,16', '1648881411730178050', '2022C85_金沙江上游清洁能源基地叶巴滩抽水蓄能电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-12-07', '2022-12-08', NULL, NULL, NULL, NULL, '2022-12-08', '2022-12-08');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750044', 71, 111, '100,84', '100,7,128', '1648881411885367297', '2022C79_泸州市龙马潭区金龙胡市片区现代农业产业园区1:2000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-12-23', '2022-12-26', NULL, NULL, NULL, NULL, '2022-12-24', '2022-12-26');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750045', 33, 107, '11,4,48,45,57', '48,45,47,16,168,64', '1648881411138781186', '2023C10_德登抽水蓄能电站规划阶段地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-05-18', '2023-05-26', NULL, NULL, '全站仪（带免棱镜）、2个基座、1个花杆、3个棱镜头（可以插在基座上的那种），4个脚架，4个对讲机，控制点标芯6个。高原气压表1个。', NULL, '2023-05-19', '2023-05-19');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750046', NULL, 110, '101,55,6,65,100,153,108', '106,46,2,153,168,69', '1648881410832596993', '2023C26_金沙江上游清洁能源基地叶巴滩混合式抽水蓄能电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-03-14', '2023-03-14', NULL, NULL, NULL, NULL, '2023-03-14', '2023-03-14');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750047', 113, NULL, '31,176,177,46,73', '98,31,176,177,150', '1648881412631953410', '2022C51_孟底沟水电站张牙沟35kV变电站、民爆器材库测绘项目', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-07-13', '2022-07-13', NULL, NULL, NULL, NULL, '2022-07-13', '2022-07-13');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750048', 83, 111, '66,105,46,106,99,6,110', '66,105,64,106,99,6,130', '1648881412514512898', '2022C58_资源县（马家站点）抽水蓄能电站地形地类图测绘', NULL, NULL, NULL, 10, '更换全站仪。同意。', 17, '增加一台索佳全站仪，CF0727\n申领的所有设备及配件均已发放。', NULL, '2022-07-19', '2022-07-20', NULL, NULL, NULL, NULL, '2022-07-20', '2022-07-20');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750049', 55, 109, '198,18,98,109,137,139', '31,18,98,109,137,120', '1648881418239737858', '2020W24_泸县“房地一体”宅基地使用权、集体建设用地使用权及房屋所有权不动产登记项目', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-10-17', NULL, NULL, NULL, '泸县房地一体现场检查', NULL, '2022-10-17', '2022-10-17');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750050', 34, 107, '146', '103', '1648881412204134402', '2022C68_屏山抽水蓄能电站西村站址地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-10-17', '2022-10-17', NULL, NULL, NULL, NULL, '2022-10-17', '2022-10-17');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750051', 113, NULL, '85,96,95,92,7,34', '89,85,96,95,92,59', '1648881412384489473', '2022W30_广元市自然资源局昭化区分局昭化区林权权籍补充调查服务采购项目', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-10-25', '2022-10-30', NULL, NULL, NULL, NULL, '2022-10-26', '2022-10-26');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750052', 94, 111, '88,87,11,69,68,155,154,152,199,65', '86,88,87,11,69,68,155,154,152,108', '1648881411772121090', '2022C83_道孚抽水蓄能水电站可研阶段地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2022-12-26', '2022-12-29', NULL, NULL, '脚架6幅、对中杆2根、基座6个、高原气压表1个、对讲机4幅、带站牌棱镜2个。', NULL, '2022-12-28', '2022-12-29');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750053', 102, 112, '100', '101,154,48', '1648881413860884481', '2022W05_雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测（2022年）', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-01-31', '2023-02-02', NULL, NULL, NULL, NULL, '2023-02-01', '2023-02-01');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750054', 32, 107, '88', '9', '1648881411533045762', '2023C01_绵竹抽水蓄能电站工程区可研阶段地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-01', '2023-02-02', NULL, NULL, NULL, NULL, '2023-02-02', '2023-02-02');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750055', 71, 111, '82,84,100,110,101,10,6,68,6', '82,84,100,110,101,10,6,83,177,6', '1648881413512757249', '2022C15_孟底沟水电站场内交通左岸、右岸公路工程项目测量', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-03-18', '2022-03-23', NULL, NULL, NULL, NULL, '2022-03-20', '2022-03-21');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750056', 121, 203, NULL, NULL, '1648881413827330049', '2022W08_大渡河金川水电站工程测量中心劳务配合（2022年）', NULL, NULL, NULL, 10, '同意。使用结束及时归还，以备其他项目需要。', 17, '设备就绪，等待发放', NULL, '2022-03-21', '2022-03-31', NULL, NULL, NULL, NULL, '2022-03-22', '2022-03-22');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750057', 34, 107, '18', '142', '1648881413462425602', '2022W13_新疆哈密抽水蓄能电站工程开挖区域精密测量及工程量计算技术服务合同', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-03-22', '2022-03-31', NULL, NULL, NULL, NULL, '2022-03-22', '2022-03-22');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750058', 35, 107, '61,18,157,151,164,169,46,45,108,73,83,150', '100,101,157,151,164,169,108,73,108,161', '1648881412552261633', '2022C56_新华水力发电有限公司博州10万千瓦储热型光热配建90万千瓦新能源项目地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-07-25', '2022-07-27', NULL, NULL, NULL, NULL, '2022-07-26', '2022-07-27');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750059', 61, 111, '110', '83,153,75', '1648881414410338305', '2021C89_芦山抽水蓄能电站预可阶段测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-07-07', '2022-07-12', NULL, NULL, NULL, NULL, '2022-07-12', '2022-07-12');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750060', 121, 203, '59', '88', '1648881413827330049', '2022W08_大渡河金川水电站工程测量中心劳务配合（2022年）', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-12-12', '2022-12-17', NULL, NULL, NULL, NULL, '2022-12-15', '2022-12-17');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750061', 83, 111, '102,98,15,158,157,152,102', '102,99,15,158,157,152,108', '1648881413181407233', '2022C28_广东省梅县九龙嶂、台山黄茅岗抽蓄电站规划阶段测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-10-05', '2022-10-10', NULL, NULL, NULL, NULL, '2022-10-08', '2022-10-08');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750062', NULL, 111, '199,176,177,171', '176,172,102,176', '1648881412141219841', '2022C71_双江口水电站产卵场地形地类图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-10-14', '2022-10-17', NULL, NULL, '用于攀枝花光伏补测', NULL, '2022-10-14', '2022-10-14');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750063', 122, 201, '61', '11', '1648881413806358530', '2022W09_四川省雅砻江两河口水电站工程测量中心服务（2022年）', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-10-19', '2022-10-19', NULL, NULL, NULL, NULL, '2022-10-19', '2022-10-19');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750064', 71, 111, '61,57,59,27,150,147,65', '59,150,147,16,109,140,132', '1648881411885367297', '2022C79_泸州市龙马潭区金龙胡市片区现代农业产业园区1:2000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-12-07', '2022-12-08', NULL, NULL, NULL, NULL, '2022-12-07', '2022-12-07');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750065', 145, 111, '45,83,200', '84,83,45', '1648881411751149569', '2022C84_波罗水电站地形图补测', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-12-23', '2023-01-04', NULL, NULL, '脚架2个，带觇牌棱镜2个，对讲机6套，中海达包（蓝电台）2套，蓄电池及充电器1套', NULL, '2022-12-24', '2022-12-26');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750066', 101, 112, '105,114,140', '105,114,200', '1648881413328207874', '2022W17_国网西藏拉萨发电公司直孔电站变形监测控制网复测及工作基点校测技术服务', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-12-22', '2022-12-24', NULL, NULL, '直孔水电站监测项目补充借用设备', NULL, '2022-12-23', '2022-12-23');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750067', 10, 102, NULL, NULL, '1648881414234177537', '2021C98_芦山县河道治理工程地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '按批准发放', NULL, '2021-11-29', '2021-12-01', NULL, NULL, '测试流程', NULL, '2021-12-01', '2021-12-01');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750068', 10, 102, '163', NULL, '1648881414154485761', '2021C102_JW和XR吊桥施工图', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-12-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750069', 10, 102, '5', NULL, '1648881414154485761', '2021C102_JW和XR吊桥施工图', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-12-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750070', 71, 111, '161,6,100102,75', '163,6,100102,98', '1648881413709889537', '2022C07_瀑布沟丰乐浸水湾1000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-02-15', NULL, NULL, NULL, NULL, NULL, '2022-02-21', '2022-02-21');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750071', 71, 111, NULL, '163,6', '1648881413667946498', '2022C10_长河坝水电站牛棚子沟泥石流治理工程初步设计1:1000地形图及菩提河坝安置场地后坡危岩治理工程设计变更1:50', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-02-25', '2022-02-26', NULL, NULL, NULL, NULL, '2022-02-25', '2022-02-25');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750072', NULL, 111, '31', '31', '1648881413894438914', '2022C04_川西大桥固床坝及工点边坡地形图测量', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-03-01', '2022-03-02', NULL, NULL, NULL, NULL, '2022-03-01', '2022-03-01');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750073', 15, 115, '133,110,115,101,10,102,101', '100,101,102,176,9,46,47', '1648881412610981889', '2022C53_宗西抽水蓄能电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-07-15', '2022-07-19', NULL, NULL, NULL, NULL, '2022-07-18', '2022-07-18');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750074', 55, 109, '48,58', '31,169,46', '1648881418034216962', '2020W28_溪洛渡水电站坝区土地勘界及测绘技术服务合同', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-06-16', '2022-06-22', NULL, NULL, NULL, NULL, '2022-06-18', '2022-06-20');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750075', 61, 111, '99,101,105,107,193,194,201,120,4,105', '110,101,66,107,193,194,201,120,4,198', '1648881412124442625', '2022C72_石棉县新民集镇震损变形应急监测土建及观测', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-10-13', '2022-10-14', NULL, NULL, NULL, NULL, '2022-10-14', '2022-10-14');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750076', 71, 110, '6,20,90', '100,109,98', '1648881410631270438', '2024C16_ML公路放线测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-04-09', '2024-04-09', NULL, NULL, NULL, NULL, '2024-04-09', '2024-04-09');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750077', 33, 110, '90,134,109,86,57,149,66', '198,149,109,76,16,66,64', '1648881411826647041', '2022C81_ 宜宾蟠龙抽水蓄能电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-01-04', '2023-01-08', NULL, NULL, '3RTK杆，及手簿等', NULL, '2023-01-04', '2023-01-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750078', 33, 110, '91,100,100,158,157', '100,87', '1648881411826647041', '2022C81_ 宜宾蟠龙抽水蓄能电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-12-08', '2022-12-13', NULL, NULL, '全站仪需要免棱镜，3个RTK杆，4个手簿，4个脚架，1个棱镜，一套做控制工具、字模及6个标芯，4个基座。', NULL, '2022-12-09', '2022-12-09');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750079', 71, 111, '110', '110', '1648881413651169282', '2022C09_焦子坪移民安置点、引水线路等地形图测量', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-02-26', '2022-02-25', NULL, NULL, NULL, NULL, '2022-02-28', '2022-02-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750080', 113, NULL, '103,46', '103,60', '1648881419607080962', '2019W20_南江县农房登记权籍调查及测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-03-07', '2022-03-08', NULL, NULL, NULL, NULL, '2022-03-13', '2022-03-14');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750081', 102, 112, '120,194', '120,194', '1648881412493541377', '2022C59_大渡河老鹰岩一级水电站施工测量控制网设计、建网及首次观测', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-09-20', '2022-09-20', NULL, NULL, NULL, NULL, '2022-09-20', '2022-09-20');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750082', 144, 115, '165,84', '124,2', '1648881412963303425', '2022W24_广西平那高速公路测量项目', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-08-30', '2022-08-30', NULL, NULL, NULL, NULL, '2022-08-30', '2022-08-30');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750083', 83, 111, NULL, NULL, '1648881414020268033', '2021C105_溪洛渡水电站雷波库区滑坡塌岸配合测量', NULL, NULL, NULL, 10, '同意。', 112, '仪器设备已配发。', NULL, '2021-12-17', '2021-12-24', NULL, NULL, NULL, NULL, '2021-12-24', '2021-12-24');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750084', 83, 111, '9,168,18', '109,108,31', '1648881413584060417', '2022C12_硬梁包电站扯索坝和二里坝桥行洪论证测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-03-11', '2022-03-15', NULL, NULL, NULL, NULL, '2022-03-14', '2022-03-14');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750085', 94, 111, '45,10,199,149,152,161,160,109,11', '177,45,10,199,149,152,161,160,109', '1648881412594204674', '2022C54_攀枝花三峡光伏发电项目地形图测', NULL, NULL, NULL, 10, '同意。', 17, 'GPS由3台银河6改为2台华测（3379406 3296510），所借设备均已发放', NULL, '2022-07-15', '2022-07-20', NULL, NULL, '脚架3副、基座3个、对中杆2根、棱镜2个、高原气压表1个、对讲机3套。', NULL, '2022-07-15', '2022-07-15');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750086', NULL, 111, '6,139,124', '6,140,169,57', '1648881412141219841', '2022C71_双江口水电站产卵场地形地类图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-10-12', '2022-10-14', NULL, NULL, NULL, NULL, '2022-10-13', '2022-10-13');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750087', 71, 111, '196,15', '196,15', '1648881413164630018', '2022C29_雅安市名山区百丈镇临溪河综合整治项目地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-10-17', '2022-10-18', NULL, NULL, NULL, NULL, '2022-10-17', '2022-10-17');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750088', 71, 111, '68,7,200,86,88,87,68', '68,7,4,165,88,46,88', '1648881412254466049', '2022C65_大熊猫国家公园芦山县长石坝-南天门、鹿厂河-九里岗防火道路恢复重建工程地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-10-20', '2022-10-20', NULL, NULL, NULL, NULL, '2022-10-20', '2022-10-20');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750089', 94, 111, '100,155,154,73,76,200,86,88,87,4', '151,4,69,157,154,73,76,200,86,46', '1648881411772121090', '2022C83_道孚抽水蓄能水电站可研阶段地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-12-09', '2022-12-14', NULL, NULL, '脚架6副、基座6个、对讲机4套、气压表1个、对中杆3根。', NULL, '2022-12-09', '2022-12-12');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750090', 113, NULL, NULL, '107,101,167', '1648881413751832578', '2022C06_溪洛渡水电站天星坝水库界桩测设', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-03-22', '2022-03-23', NULL, NULL, NULL, NULL, '2022-03-22', '2022-03-22');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750091', 46, 111, '4,61,77,76,73,193,122,152,137,110', '65,61,77,76,73,193,122,152,137,4', '1648881417077915649', '2020W38_眉山东部新城起步区1:500地形测绘服务采购项目', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-03-25', '2022-03-25', NULL, NULL, '眉山东部新城检测资质使用', NULL, '2022-03-25', '2022-03-25');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750092', NULL, 111, NULL, NULL, '1648881414095765505', '2022W01_雅砻江桐子林水电站水库泥沙断面测量（2022年）', NULL, NULL, NULL, 10, '同意。', 112, '全站仪2台；GPS，4台套；其他附件若干；', NULL, '2021-12-07', NULL, NULL, NULL, NULL, NULL, '2021-12-08', '2021-12-08');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750093', 101, 112, '55,59,49,56,51,4,75,18', '52,55,59,49,56,51,4,159', '1648881412774559745', '2022C44_天星坝施工控制网点恢复测量及现场点位移交工作', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-06-22', '2022-06-23', NULL, NULL, NULL, NULL, '2022-06-23', '2022-06-23');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750094', 144, 115, '51', '149', '1648881413210767362', '2022C24_芦山县禾茂田园地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-08-04', '2022-08-05', NULL, NULL, NULL, NULL, '2022-08-04', '2022-08-05');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750095', 144, 115, '69', '99', '1648881412023779329', '2022C74_岗托水电站勘探放样', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-10-28', '2022-10-31', NULL, NULL, NULL, NULL, '2022-10-28', '2022-10-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750096', 61, 111, '75,12,18,109,168', '75,12,18,109,34', '1648881412422238210', '2022W29_雅砻江二滩水库泥沙断面测量项目合同', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-08', NULL, NULL, NULL, NULL, NULL, '2022-11-09', '2022-11-10');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750097', 46, 109, '149,76', '159,109', '1648881417006612482', '2020C65_桐子林和二滩水电站工程枢纽区及右岸公路地质灾害区1:500倾斜摄影测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-16', NULL, NULL, NULL, '用于配合省质检站检查本项目。', NULL, '2022-11-16', '2022-11-16');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750098', 94, 111, '11,130', '86,112', '1648881411906338818', '2022W40_简阳市放生坝片区砂石储量调查项目工程地质勘察', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-30', '2022-12-05', NULL, NULL, '对中杆两根。', NULL, '2022-12-02', '2022-12-05');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750099', 144, 115, '151,157,46,47,48,45,12,61', '151,157,46,47,48,45,12,199', '1648881411587571714', '2022C86_双滩抽蓄电站测绘工作', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2022-12-27', '2022-12-29', NULL, NULL, NULL, NULL, '2022-12-28', '2022-12-29');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750100', 32, 107, '48,177', '16,106', '1648881412254466049', '2022C65_大熊猫国家公园芦山县长石坝-南天门、鹿厂河-九里岗防火道路恢复重建工程地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-01-10', '2023-01-10', NULL, NULL, NULL, NULL, '2023-01-10', '2023-01-10');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750101', NULL, 111, '61,65,16,73,76,117,118,140,98', '18,61,65,73,76,117,118,140,47', '1648881413483397121', '2022C16_楞古水电站预可阶段测绘技术服务', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-03-25', '2022-03-29', NULL, NULL, NULL, NULL, '2022-03-28', '2022-03-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750102', 122, 201, '159', '176', '1648881413806358530', '2022W09_四川省雅砻江两河口水电站工程测量中心服务（2022年）', NULL, NULL, NULL, 10, '同意。', 17, '设备已就绪，待发放', NULL, '2022-05-05', '2022-05-13', NULL, NULL, NULL, NULL, '2022-05-06', '2022-05-06');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750103', 145, 111, '164,16', '110,31,161', '1648881413529534465', '2022W11_黄河干流若尔盖段应急处置项目原始水下地形测量', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-03-30', NULL, NULL, NULL, NULL, NULL, '2022-03-30', '2022-03-30');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750104', 71, 111, '110,108,98,109,107,6,149,110,177', '108,110,98,109,107,6,149,167,106', '1648881412254466049', '2022C65_大熊猫国家公园芦山县长石坝-南天门、鹿厂河-九里岗防火道路恢复重建工程地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-09-23', '2022-09-26', NULL, NULL, NULL, NULL, '2022-09-26', '2022-09-27');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750105', 94, 111, '110,172', '66,65', '1648881413164630018', '2022C29_雅安市名山区百丈镇临溪河综合整治项目地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-09-28', '2022-09-29', NULL, NULL, NULL, NULL, '2022-09-28', '2022-09-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750106', 33, 110, '5,90,12', '76,73,10', '1648881411906338818', '2022W40_简阳市放生坝片区砂石储量调查项目工程地质勘察', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-12-02', '2022-12-07', NULL, NULL, '全站仪要有免冷镜，借2个RTK杆，一个三脚架，一个棱镜', NULL, '2022-12-06', '2022-12-06');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750107', 95, 111, '123,103,9,168,144,109,143,113,112,114', '103,165,144,146,143,113,112,123,167,169', '1648881414641025025', '2021C81_雅鲁藏布江下游JW梯级水电站测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-10-28', '2022-10-29', NULL, NULL, NULL, NULL, '2022-10-28', '2022-10-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750108', 71, 110, '100,101,106,61,64,6,117,118,152,153,166', '108,6,117,118,153,125,155,64,92', '1648881411457548290', '2023C02_江油抽水蓄能电站可研阶段工程区地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-03', '2023-02-06', NULL, NULL, NULL, NULL, '2023-02-05', '2023-02-06');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750109', 145, 115, '140,186,65,101', '186,65,66,140,63', '1648881412573233153', '2022C55_两河口混蓄电站项目地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-03', '2023-02-09', NULL, NULL, NULL, NULL, '2023-02-05', '2023-02-06');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750110', 71, 111, '100,102,9', '102,107,110,102,107', NULL, '2022C22_邢台东石岭水库抽蓄项目地形图测绘', NULL, NULL, NULL, 10, '因此项目暂缓，本批仪器挂到永善高速公路地形图调绘、江油抽蓄项目。', 17, '收到，设备已全部发放', NULL, '2022-04-13', '2022-04-19', NULL, NULL, NULL, NULL, '2022-04-19', '2022-04-19');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750111', NULL, 115, '45,142,124', '45,47,168,141', '1648881413294653441', '2022W19_黄河四川段综合治理可行性研究项目测绘工作项目	（补充）', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-04-01', NULL, NULL, NULL, NULL, NULL, '2022-04-02', '2022-04-02');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750112', 144, 115, '102,168,11,177', '6,102,11,100', '1648881413193990145', '2022C27_大岗山水电站库尾实物指标配合测量', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-05-07', NULL, NULL, NULL, NULL, NULL, '2022-05-07', '2022-05-07');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750113', 71, 111, '99,6,165,100', '99,10,177,176', '1648881413114298369', '2022C32_龚嘴电站鱼道工程渣场地形图测量', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-08-02', '2022-08-03', NULL, NULL, NULL, NULL, '2022-08-02', '2022-08-02');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750114', 83, 111, '123,193,194,167', '115', '1648881412443209730', '2022W27_G4216线屏山新市至金阳段永善支线基础控制测量及地形图测绘项目', NULL, NULL, NULL, 10, '同意。', 17, '设备已按申请清单逐一发放', NULL, '2022-08-04', '2022-08-04', NULL, NULL, NULL, NULL, '2022-08-04', '2022-08-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750115', 102, 112, '165', '16', '1648881412493541377', '2022C59_大渡河老鹰岩一级水电站施工测量控制网设计、建网及首次观测', NULL, NULL, NULL, 10, '同意。', 17, '设备已就绪，待发放', NULL, '2022-09-01', NULL, NULL, NULL, NULL, NULL, '2022-09-01', '2022-09-01');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750116', 144, 115, '61', '165,106', '1648881412023779329', '2022C74_岗托水电站勘探放样', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-03', '2022-11-04', NULL, NULL, NULL, NULL, '2022-11-04', '2022-11-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750117', 61, 111, '99', '76', '1648881413181407233', '2022C28_广东省梅县九龙嶂、台山黄茅岗抽蓄电站规划阶段测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-08', '2022-11-14', NULL, NULL, NULL, NULL, '2022-11-09', '2022-11-10');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750118', 94, 111, '2,147,146,147,172', '100,108,147,152,172', '1648881412074110977', '2022C73_广东省云浮市云安区都杨镇牛栏坑绿色建材项目测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-10-26', '2022-10-26', NULL, NULL, '脚架1副、对中基座1个、棱镜1个、对中杆2根、充电宝2个。', NULL, '2022-10-26', '2022-10-26');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750119', 32, 107, '110', '99', '1648881412254466049', '2022C65_大熊猫国家公园芦山县长石坝-南天门、鹿厂河-九里岗防火道路恢复重建工程地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-10-27', '2022-10-27', NULL, NULL, NULL, NULL, '2022-10-27', '2022-10-27');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750120', 144, 115, '7,157,144,167,95,89', '61,7,157,144,167,176', '1648881411201695745', '2023C03_四川得荣抽水蓄能电站预可阶段地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-06', '2023-02-08', NULL, NULL, NULL, NULL, '2023-02-07', '2023-02-07');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750121', 35, 107, '48,62', '48,169', '1648881411122003970', '2023C11_着巴抽水蓄能电站规划阶段地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-13', '2023-02-17', NULL, NULL, NULL, NULL, '2023-02-13', '2023-02-14');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750122', 121, 202, '65', '110', '1648881413567283202', '2022C13_双江口水电站浦西房屋高程点测量', NULL, NULL, NULL, 10, '同意。', 17, '设备就绪，已发放', NULL, '2022-03-31', NULL, NULL, NULL, '用于绰斯甲测量中心测量施工控制网。', NULL, '2022-03-31', '2022-03-31');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750123', 15, 115, '47,45,107', '47,45,9', '1648881413227544578', '2022C25_狮子坪电站弃渣料场地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已就绪，待发放', NULL, '2022-04-22', NULL, NULL, NULL, NULL, NULL, '2022-04-22', '2022-04-22');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750124', 101, 112, '101', '45', '1648881414175457281', '2021C101_惠州惠阳区屋顶分布式光伏电站测绘项目', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-04-22', '2022-04-22', NULL, NULL, '惠州惠阳区屋顶光伏新增测绘点', NULL, '2022-04-22', '2022-04-22');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750125', 144, 115, '27', '145', '1648881413877661698', '2022C05_宁南果木二期风电项目地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-05-07', NULL, NULL, NULL, NULL, NULL, '2022-05-07', '2022-05-07');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750126', 144, 115, '11,46', '124,133', '1648881413193990145', '2022C27_大岗山水电站库尾实物指标配合测量', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-05-11', NULL, NULL, NULL, '美姑沉降观测项目借用设备', NULL, NULL, NULL);
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750127', 35, 107, '102', '59', '1648881413311430658', '2022W20_云南罗富高速公路航飞项目', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-04-02', '2022-04-09', NULL, NULL, '华测i90   1台', NULL, '2022-04-05', '2022-04-06');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750128', 94, 111, '66,73,75,82,10,9,147,156,151,64,109', '65,66,73,75,82,10,9,147,156,151', '1648881412204134402', '2022C68_屏山抽水蓄能电站西村站址地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-09-30', '2022-09-30', NULL, NULL, '对讲机4台、对中杆2根、脚架6副、充电宝3个、棱镜3个。', NULL, '2022-09-30', '2022-09-30');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750129', NULL, 111, '99,99', '99,61', '1648881412346740737', '2022C62_东石岭抽水蓄能水电站地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-09-30', '2022-10-08', NULL, NULL, NULL, NULL, '2022-09-30', '2022-09-30');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750130', 72, 111, '165,68,200,86,88,87,169,158', '68,200,86,88,87,7,34,100', '1648881412002807809', '2022C75_大渡河长河坝抽水蓄能预可阶段测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-03', '2022-11-04', NULL, NULL, NULL, NULL, '2022-11-04', '2022-11-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750131', 72, 111, '86', '11', '1648881412002807809', '2022C75_大渡河长河坝抽水蓄能预可阶段测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-03', '2022-11-04', NULL, NULL, NULL, NULL, '2022-11-04', '2022-11-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750132', 61, 110, '63,69,68,10,18,133,186', '10,133,20,84,75,83,75', '1648881411373662209', '2023W02_雅砻江桐子林水电站水库泥沙断面测量（2023年）', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-06', '2023-02-09', NULL, NULL, NULL, NULL, '2023-02-07', '2023-02-07');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750133', 33, 107, '45,34,98', '46,165,110', '1648881411105226753', '2023C09_洪雅抽水蓄能电站预可阶段地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-08', '2023-02-09', NULL, NULL, NULL, NULL, '2023-02-09', '2023-02-09');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750134', 34, 107, '73,69', '63,94', '1648881411105226753', '2023C09_洪雅抽水蓄能电站预可阶段地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-13', '2023-02-16', NULL, NULL, NULL, NULL, '2023-02-13', '2023-02-14');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750135', 59, NULL, '12,172,108', '27,172,107', '1648881418239737858', '2020W24_泸县“房地一体”宅基地使用权、集体建设用地使用权及房屋所有权不动产登记项目', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-04-07', NULL, NULL, NULL, NULL, NULL, '2022-04-07', '2022-04-08');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750136', 94, 111, '48,9,102', '48,9,34', '1648881413147852802', '2022C30_金上-湖北±800千伏直流工程换流站建设征地实物指标调查', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-05-11', '2022-05-11', NULL, NULL, NULL, NULL, '2022-05-11', '2022-05-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750137', 109, 112, '4,177,28', '87,18', '1648881413344985090', '2022W18_国网拉萨发电公司2022年直孔大坝、羊湖压力钢管等定期变形监测及年度资料整编技术服务', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-04-01', '2022-04-02', NULL, NULL, NULL, NULL, '2022-04-02', '2022-04-02');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750138', 83, 111, '110,102,105,107,109,98,106,65', '110,102,105,107,109,98,106,167', '1648881412443209730', '2022W27_G4216线屏山新市至金阳段永善支线基础控制测量及地形图测绘项目', NULL, NULL, NULL, 10, '同意。', 17, '加1根华测电瓶连接线和1个蓄电池（含充电器）\n所借设备均已发放', NULL, '2022-08-15', '2022-08-17', NULL, NULL, NULL, NULL, '2022-08-17', '2022-08-17');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750139', 83, 111, '66', '57', '1648881412443209730', '2022W27_G4216线屏山新市至金阳段永善支线基础控制测量及地形图测绘项目', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-08-23', NULL, NULL, NULL, '校核GNSS点边长及高差。', NULL, '2022-08-23', '2022-08-23');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750140', 144, 115, '119,100', '119,98', '1648881412963303425', '2022W24_广西平那高速公路测量项目', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-09-19', '2022-09-19', NULL, NULL, NULL, NULL, '2022-09-19', '2022-09-19');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750141', 103, 112, '161,140,133,65,66,83,123,10', '10,161,133,65,83,123,64,105', '1648881412170579969', '2022W34_大唐观音岩水电站2022年度变形监测控制网复测及坝前淤积和坝后冲刷测量项目', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-03', '2022-11-04', NULL, NULL, '对中杆1根；救生衣4件；脚架2个', NULL, '2022-11-04', '2022-11-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750142', 32, 107, '66,205', '66,98', '1648881411986030594', '2022W39_海南全岛地形变化较大区域、漏洞区域机载LIDAR数据获取技术服务项目', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-07', '2022-11-08', NULL, NULL, '对中杆一个', NULL, '2022-11-07', '2022-11-08');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750143', 145, 111, '108,106', '176,86,106', '1648881411944087553', '2022C77_孟底沟水电站尼呷2#承包商营地及施工场地1:500地形图测绘', NULL, NULL, NULL, 10, NULL, 17, '已发放', NULL, '2022-11-18', '2022-11-21', NULL, NULL, NULL, NULL, '2022-11-18', '2022-11-18');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750144', NULL, 115, '91,92,85,163,171', '92,85,101,45', '1648881410945843202', '2023C19_雅砻江楞古水电站地形地类图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-23', '2023-02-24', NULL, NULL, NULL, NULL, '2023-02-23', '2023-02-23');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750145', 33, 107, '58,51,52,5,2,155,106,65', '47,48,176,98,100', '1648881410832596993', '2023C26_金沙江上游清洁能源基地叶巴滩混合式抽水蓄能电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-03-04', '2023-03-08', NULL, NULL, '基座5个、脚架5个、脚架5个、花杆1个、高原气压表1个、棱镜2个、升高杆2个、平板电脑2个、对讲机4个。', NULL, '2023-03-07', '2023-03-07');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750146', 121, 203, '177', '98', '1648881411419799553', '2023W08_大渡河金川水电站工程测量中心劳务配合（2023年）', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-23', '2023-02-24', NULL, NULL, NULL, NULL, '2023-02-23', '2023-02-23');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750147', 55, 109, '108', '10', NULL, '双江口复建公路线路校核', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-03-06', '2023-03-14', NULL, NULL, '无基座，两电一冲。长天线一根，数据线一根。小手薄一个，手薄充电器一个，中海达花杆一根。', NULL, '2023-03-08', '2023-03-08');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750148', 71, 111, '131,6,58,59,56,176,102', '68,58,168,132,51,12,102', '1648881413164630018', '2022C29_雅安市名山区百丈镇临溪河综合整治项目地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-05-12', '2022-05-12', NULL, NULL, NULL, NULL, '2022-05-12', '2022-05-12');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750149', 15, 115, '100,46', '45,100', '1648881413210767362', '2022C24_芦山县禾茂田园地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-04-21', '2022-04-21', NULL, NULL, NULL, NULL, '2022-04-21', '2022-04-21');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750150', 113, NULL, '31,107,11', '31,101,6', '1648881413667946498', '2022C10_长河坝水电站牛棚子沟泥石流治理工程初步设计1:1000地形图及菩提河坝安置场地后坡危岩治理工程设计变更1:50', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-05-16', '2022-05-16', NULL, NULL, NULL, NULL, '2022-05-16', '2022-05-16');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750151', 144, 115, '10,115,106', '10,165,68', '1648881413210767362', '2022C24_芦山县禾茂田园地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '设备已发放', NULL, '2022-08-05', '2022-08-08', NULL, NULL, '所借设备为项目任务新增用', NULL, '2022-08-08', '2022-08-08');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750152', 144, 115, '101,101,168', '100,101,151', '1648881414410338305', '2021C89_芦山抽水蓄能电站预可阶段测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已就绪，待发放', NULL, '2022-08-08', '2022-08-09', NULL, NULL, NULL, NULL, '2022-08-09', '2022-08-09');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750153', 71, 111, '69,58,57,102,117,114', '50,58,34,51,117,114', '1648881413164630018', '2022C29_雅安市名山区百丈镇临溪河综合整治项目地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-08-26', '2022-08-29', NULL, NULL, NULL, NULL, '2022-08-29', '2022-08-29');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750154', 71, 111, '31', '177', '1648881412220911618', '2022C66_大熊猫国家公园芦山县保护管理设施项目地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-09-30', '2022-10-08', NULL, NULL, NULL, NULL, '2022-10-08', '2022-10-08');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750155', 94, 111, '100,35,152,59', '168,35,152,110', '1648881411965059074', '2022C76_芦山县市政公园恢复及重建工程项目地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-15', '2022-11-17', NULL, NULL, '脚架3副、对中杆2根、棱镜2个、对讲机2个、基座1个、气压表1个', NULL, '2022-11-16', '2022-11-16');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750156', 83, 111, '87,137,61', '87,139,48', '1648881415412776962', '2021C56_老木孔航电枢纽工程地形图及断面测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-25', '2022-11-29', NULL, NULL, NULL, NULL, '2022-11-29', '2022-11-29');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750157', 101, 112, '86,127,106', '98,127,111,8', '1648881413328207874', '2022W17_国网西藏拉萨发电公司直孔电站变形监测控制网复测及工作基点校测技术服务', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-12-04', '2022-12-06', NULL, NULL, NULL, NULL, '2022-12-06', '2022-12-06');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750158', 61, 110, '73,34,199,186,84,80,79,155,76', '139,73,34,199,186,84,11,186,10', '1648881411067478017', '2023C12_雅砻江两河口水电站水库泥沙监测系统建设工程、运行维护及泥沙淤积影响分析研究项目测量工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-03-03', '2023-03-09', NULL, NULL, NULL, NULL, '2023-03-09', '2023-03-09');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750159', 120, 202, NULL, '56,62', '1648881411281387521', '2023W06_四川大渡河双江口水电站枢纽工程测量中心服务（2023年）', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-11', '2023-02-20', NULL, NULL, NULL, NULL, '2023-02-13', '2023-02-13');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750160', 71, 111, '12,163,52', '161,100,201', '1648881413114298369', '2022C32_龚嘴电站鱼道工程渣场地形图测量', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-05-18', '2022-05-24', NULL, NULL, NULL, NULL, '2022-05-18', '2022-05-24');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750161', 83, 111, '133,145', '167,163', '1648881413131075586', '2022C31_直孔电站库容复核测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-05-16', '2022-05-16', NULL, NULL, NULL, NULL, '2022-05-16', '2022-05-16');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750162', 59, NULL, '64', '107', '1648881418239737858', '2020W24_泸县“房地一体”宅基地使用权、集体建设用地使用权及房屋所有权不动产登记项目', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-05-20', NULL, NULL, NULL, '质检用', NULL, '2022-05-24', '2022-05-24');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750163', 71, 111, '11', '199,58', '1648881413483397121', '2022C16_楞古水电站预可阶段测绘技术服务', NULL, NULL, NULL, 10, '同意。', 17, '设备已就绪，待发放', NULL, '2022-06-01', '2022-06-01', NULL, NULL, NULL, NULL, '2022-06-01', '2022-06-01');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750164', 144, 115, '6,101,140', '107,16,61,18', '1648881413210767362', '2022C24_芦山县禾茂田园地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-06-02', NULL, NULL, NULL, NULL, NULL, '2022-06-02', '2022-06-06');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750165', 33, 110, '154,176,177', '154,155,61', '1648881412401266689', '2022W28_金川党坝抽水蓄能电站地形测绘', NULL, NULL, NULL, 10, '同意', 17, '设备已就绪，待发放', NULL, '2022-08-05', '2022-08-08', NULL, NULL, '用于项目调绘使用。', NULL, '2022-08-05', '2022-08-05');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750166', 83, 111, '38,39,40,36,41,42,43,44,99', '37,38,39,40,41,42,43,44,99', '1648881412443209730', '2022W27_G4216线屏山新市至金阳段永善支线基础控制测量及地形图测绘项目', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-08-12', NULL, NULL, NULL, NULL, NULL, '2022-08-17', '2022-08-17');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750167', NULL, 111, '66', '64', '1648881412346740737', '2022C62_东石岭抽水蓄能水电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2022-08-16', '2022-08-16', NULL, NULL, '新增', NULL, '2022-08-16', '2022-08-16');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750168', 144, 115, '64,68,11,108,57', '87,139,165,109,153,10', '1648881411868590081', '2022W41_中电工程安徽贵池区（秋江）100MW渔光互补光伏电站项目', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-18', '2022-11-18', NULL, NULL, NULL, NULL, '2022-11-18', '2022-11-18');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750169', 61, 111, '61,47', '156,205', '1648881412422238210', '2022W29_雅砻江二滩水库泥沙断面测量项目合同', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-21', '2022-11-22', NULL, NULL, '测区植被较茂密，已借V30无法满足要求。', NULL, '2022-11-21', '2022-11-21');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750170', 83, 111, '118', '88', '1648881414641025025', '2021C81_雅鲁藏布江下游JW梯级水电站测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-11-21', '2022-11-23', NULL, NULL, NULL, NULL, '2022-11-22', '2022-11-22');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750171', 35, 107, '48,46,152,66', '86,45,158,199', '1648881412552261633', '2022C56_新华水力发电有限公司博州10万千瓦储热型光热配建90万千瓦新能源项目地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2022-12-02', '2022-12-09', NULL, NULL, '和田测绘', NULL, '2022-12-05', '2022-12-05');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750172', 83, 111, '96,64,90,97,176,108', '95,96,89,90,97,47', '1648881411235250178', '2023C05_ML及JW水电工程建设征地实物指标调查配合测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-15', '2023-02-16', NULL, NULL, NULL, NULL, '2023-02-15', '2023-02-15');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750173', 102, 112, NULL, '155', '1648881411331719170', '2023W03_雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测（2023年）', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-02-16', '2023-03-06', NULL, NULL, NULL, NULL, '2023-02-17', '2023-02-20');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750174', 145, 115, '139,77', '65,80', '1648881411000369153', '2023C15_截弯梯级雅江电站水下地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '2022.03.02申请领用1台V90： VA11604338\n所有设备均已发放', NULL, '2023-03-01', '2023-03-08', NULL, NULL, NULL, NULL, '2023-03-02', '2023-03-02');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750175', 71, 110, '70,64', '70,86', '1648881411017146369', '2023C17_江油抽水蓄能水电站青江补水泵断面测量工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-03-06', '2023-03-08', NULL, NULL, NULL, NULL, '2023-03-07', '2023-03-07');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750176', 71, 110, '92,62,66,61,142,46', '62,66,61,142,213,10', '1648881411499491374', '2023C54_国能大渡河汉源永利坪光伏电站项目1:500地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-06-23', '2023-06-26', NULL, NULL, NULL, NULL, '2023-06-25', '2023-06-25');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750177', 72, 110, '11,193,213', '108,11,110', '1648881411499491375', '2023C53_岷江干流张坎航电枢纽工程排涝区域1:2000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2023-07-12', '2023-07-14', NULL, NULL, NULL, NULL, '2023-07-12', '2023-07-12');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750178', 33, 107, '62', '163,98,111', '1648881410631270411', '2023W25_平昌实景三维模型试点项目', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-07-15', '2023-07-19', NULL, NULL, '五镜头相机，多备几块电池。', NULL, '2023-07-17', '2023-07-17');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750179', 71, 110, '82,83,84,100,108,145,149,144', '47,82,83,84,100,172,145,12', '1648881411499491359', '2023C69_金沙江岗托水电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-09-14', '2023-09-20', NULL, NULL, NULL, NULL, '2023-09-17', '2023-09-18');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750180', 61, 110, '108,64,61,199,46', '4,100,98,109,172', '1648881411499491350', '2023C79_雅江抽水蓄能电站（茈卡村）地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-09-27', '2023-10-07', NULL, NULL, NULL, NULL, '2023-09-28', '2023-09-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750181', 122, 201, '142', '88', '1648881410631270459', '2024W09_四川省雅砻江两河口水电站工程测量中心服务（2024年）', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-03-01', '2024-03-06', NULL, NULL, NULL, NULL, '2024-03-04', '2024-03-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750182', 144, 115, '100', '82', NULL, '设备用于成都技能培训使用', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-03-11', '2024-03-12', NULL, NULL, NULL, NULL, '2024-03-11', '2024-03-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750183', 61, 110, '83,93,92,90,96,199,34,117,118,108', '139,90,144,199,34,117,118,225,84,98', '1648881411067478017', '2023C12_雅砻江两河口水电站水库泥沙监测系统建设工程、运行维护及泥沙淤积影响分析研究项目测量工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-03-05', '2024-03-15', NULL, NULL, NULL, NULL, '2024-03-13', '2024-03-13');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750184', 72, 110, '66,98,101,101,6', '101,106,61,6,92', '1648881411499491379', '2023C49_甘孜抽水蓄能水电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-06-09', '2023-06-09', NULL, NULL, NULL, NULL, '2023-06-09', '2023-06-09');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750185', 101, 112, '98,63', '85,63', '1648881410631270407', '2023W21_大渡河公司大岗山水电站大坝及库岸边坡监测设备设施完善工程合同', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-06-27', '2023-06-28', NULL, NULL, '初期进场装备，后续根据项目进展及工作计划逐步申请。', NULL, '2023-06-28', '2023-06-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750186', 33, 107, '68,85', '6,137', '1648881411499491375', '2023C53_岷江干流张坎航电枢纽工程排涝区域1:2000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-06-28', '2023-06-28', NULL, NULL, '基座2个，花杆1个。', NULL, '2023-06-28', '2023-06-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750187', 149, 116, '139,80', '139,145', '1648881411499491345', '2023C84_广安岳池抽水蓄能电站预可阶段地形图测绘项目', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-11-01', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750188', 71, 110, '117,113,6,147,143,199', '158,154,176', '1648881411067478017', '2023C12_雅砻江两河口水电站水库泥沙监测系统建设工程、运行维护及泥沙淤积影响分析研究项目测量工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-11-24', '2023-11-27', NULL, NULL, NULL, NULL, '2023-11-27', '2023-11-27');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750189', 84, 111, '83,147,149,97,87', '97,157,147,149,222', '1648881411499491335', '2023C94_JW梯级电站可研阶段地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-12-20', '2023-12-20', NULL, NULL, '充电器、平簿6273、连接螺丝、基高片、天线各1', NULL, '2023-12-20', '2023-12-21');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750190', 138, 114, '113,81,83,92,57,59,103', '72,73,78,232,98,231,20,65', '1648881415815430146', '2021C40_重庆轨道交通4号线西延伸段工程施工监测及控制测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-03-05', '2024-03-05', NULL, NULL, '用于项目大网复测', NULL, '2024-03-05', '2024-03-05');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750191', 95, 111, '221', '130', '1648881411235250178', '2023C05_ML及JW水电工程建设征地实物指标调查配合测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-03-14', '2024-03-15', NULL, NULL, NULL, NULL, '2024-03-15', '2024-03-15');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750192', 94, 111, '143,92,147', '87,143,213', '1648881410631270432', '2024C10_ABH卫星影像采购及1:10000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-03-15', '2024-03-15', NULL, NULL, '对中杆2根。', NULL, '2024-03-15', '2024-03-15');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750193', 33, 107, '110,98,106,109,6,177', '98,106,109,6,176', '1648881411499491364', '2023C64_理塘抽水蓄能新站址规划加深阶段测绘工作', NULL, NULL, NULL, 10, '同意。', NULL, '全站仪改借索佳 SB000833\n再借2台平板电脑 R22KB00564X  R22M4001YJZ\n已发放', NULL, '2023-08-09', '2023-08-10', NULL, NULL, '三个脚架，2个基座，2个花杆，对讲机4个，调绘平板1个，高原气压表一个。', NULL, '2023-08-09', NULL);
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750194', NULL, 111, '20,81,65', '110,59,6', '1648881411499491384', '2023C44_老木孔水电站库区道路边沟坐标高程测量', NULL, NULL, NULL, 10, '同意.', 17, '已发放', NULL, '2023-09-08', '2023-09-12', NULL, NULL, '项目新增变更需要', NULL, '2023-09-08', '2023-09-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750195', 61, 110, '109,11,2', '109,11,2', '1648881411499491353', '2023C75_金沙江波罗水电站集镇新址国省干道占地范围公路配合测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-09-11', '2023-09-12', NULL, NULL, NULL, NULL, '2023-09-11', '2023-09-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750196', 60, 110, '166,155,158,125', '155,158,199,11,114', '1648881411499491341', '2023C88_大邑抽水蓄能水电站可研阶段地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-11-10', '2023-11-10', NULL, NULL, '对中杆1根，气压表1个，基座棱镜2个，基座3个，脚架3个，对讲机4个。', NULL, '2023-11-10', '2023-11-10');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750197', 33, 107, '157', '111', NULL, 'JW新增任务，用于无人机飞行基站。', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-11-23', '2023-11-27', NULL, NULL, '三角架1个，基站1个，对中杆1个。', NULL, '2023-11-24', '2023-11-24');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750198', 72, 110, '87,201,113', '90,93,222', '1648881411499491379', '2023C49_甘孜抽水蓄能水电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-11-28', '2023-12-02', NULL, NULL, NULL, NULL, '2023-11-29', '2023-11-29');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750199', 112, NULL, '176,177,220,9', '176,177,222,87', '1648881411138781189', '2023C102_硬梁包水电站建设征地移民安置土地开发整理临时占地复垦刘河坝1:1000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-12-27', '2023-12-27', NULL, NULL, NULL, NULL, '2023-12-27', '2023-12-27');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750200', 71, 110, '93,213,144,146,6,205', '97,86,210,152,154,7,7', '1648881410631270434', '2024C12_雅砻江牙根二级水电站库区公路地形图补测', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-03-15', '2024-03-22', NULL, NULL, NULL, NULL, '2024-03-21', '2024-03-21');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750201', 145, 115, '172', '111,102', '1648881419045044225', '2019W33_美姑县扶贫项目土地整理区域1：2000高清正摄影像（DOM）制作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-03-18', '2024-03-21', NULL, NULL, '《美姑风电监测项目》木脚架1个，尺垫1副。天宝水准仪编号735239。', NULL, '2024-03-18', '2024-03-18');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750202', 94, 111, '88,20,206', '108,20,65', '1648881410631270437', '2024C15_双江口水电站库区标识牌制作及埋设', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2024-03-29', '2024-04-01', NULL, NULL, '脚架1副、对中杆2根、棱镜2个。', NULL, '2024-03-29', '2024-03-29');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750203', 138, 114, '104', '167,106', '1648881415815430146', '2021C40_重庆轨道交通4号线西延伸段工程施工监测及控制测量', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2024-03-21', '2024-03-22', NULL, NULL, '需要配备一副3米水准尺', NULL, '2024-03-22', '2024-03-22');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750204', 61, 110, '98,109,11,111', '109,11,98,4', '1648881411499491356', '2023C72_江油抽水蓄能电站界桩测设工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-29', '2023-08-30', NULL, NULL, NULL, NULL, '2023-08-30', '2023-08-30');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750205', 144, 115, '63,85,94,95,209,56', '85,94,62,95,209,45', '1648881410631270409', '2023W23_马来西亚东海岸铁路项目精测网复测', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-29', '2023-08-31', NULL, NULL, NULL, NULL, '2023-08-30', '2023-08-30');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750206', NULL, 111, '99,143', '159,154', '1648881411499491362', '2023C66_硬梁包水电站库区实物指标配合测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-11', '2023-08-14', NULL, NULL, NULL, NULL, '2023-08-11', '2023-08-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750207', 72, 110, '147,143,200,87,194,65', '87,69,80,156,155,222', '1648881411499491379', '2023C49_甘孜抽水蓄能水电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-12-02', NULL, NULL, NULL, '中海达外挂电台一套，脚架4个，基座4个，带觇牌棱镜1个，温度气压计1个。（因昌都项目未登记，设备申领登记在甘孜项目上。）', NULL, '2023-12-04', '2023-12-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750208', 83, 111, '207', '12', '1648881411499491387', '2023C41_ML库区点位配合测量（配合基础设施分公司）', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-12-07', '2023-12-07', NULL, NULL, NULL, NULL, '2023-12-07', '2023-12-07');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750209', 95, 111, '109,106', '220,166', '1648881411499491387', '2023C41_ML库区点位配合测量（配合基础设施分公司）', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-12-07', '2023-12-12', NULL, NULL, NULL, NULL, '2023-12-11', '2023-12-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750210', 60, 110, '107', '66', '1648881411499491341', '2023C88_大邑抽水蓄能水电站可研阶段地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-12-25', '2023-12-25', NULL, NULL, NULL, NULL, '2023-12-25', '2023-12-25');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750211', 32, 107, '130', '109', '1648881410631270451', '2024W01_重庆区县建成区实景三维制作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-03-18', '2024-03-19', NULL, NULL, '简易脚架1个，对中杆1个', NULL, '2024-03-18', '2024-03-18');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750212', 71, 110, '102,223,220,221,6,144,146,110,92', '223,220,110,221,6,144,146,83,12', '1648881410631270435', '2024C13_双江口水电站200万kw光伏项目地形图测绘工作(双江口测绘Ⅱ标段)', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-03-19', '2024-03-19', NULL, NULL, NULL, NULL, '2024-03-19', '2024-03-19');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750213', 33, 107, '162', '99,7', '1648881410631270435', '2024C13_双江口水电站200万kw光伏项目地形图测绘工作(双江口测绘Ⅱ标段)', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-03-22', '2024-03-25', NULL, NULL, NULL, NULL, '2024-03-25', '2024-03-25');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750214', 71, 110, '6,92,96,94,95,92', '96,140,207,97,34,101,153,151,163', '1648881411499491365', '2023C63_波罗水电站补充地形地类图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-14', '2023-08-22', NULL, NULL, NULL, NULL, '2023-08-21', '2023-08-21');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750215', 149, 116, '176,64', '177,100', '1648881411562405890', '2022C88_崇州抽蓄电站预可阶段测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-23', '2023-08-23', NULL, NULL, '云南灾普项目', NULL, '2023-08-23', '2023-08-23');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750216', 138, 114, '168', '106', '1648881410631270412', '2023W26_巴福大健康组团路网一标段第三方监测外协合同协议书', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-28', '2023-08-28', NULL, NULL, '所借仪器用于，巴福大健康组团路网监测项目和重庆市江津区团结湖大数据智能产业园三方监测项目', NULL, '2023-08-28', '2023-08-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750217', 95, 111, '146,167', '146,90', '1648881413244321794', '2022C23_江油抽水蓄能电站预可阶段测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-22', '2023-08-22', NULL, NULL, '配合成都院检查地形图（绵竹、江油、南江）', NULL, '2023-08-22', '2023-08-22');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750218', 35, 107, '200,87,87', '87,87,176', '1648881410631270451', '2024W01_重庆区县建成区实景三维制作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-01-19', '2024-01-30', NULL, NULL, NULL, NULL, '2024-01-19', '2024-01-19');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750219', 33, 107, '109,220,107,20,28,166', '109,220,221,223,9,110', '1648881411499491372', '2023C56_长河坝水电站汤坝居民点和土地复垦外部引水工程地形地类图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-01-02', '2024-01-03', NULL, NULL, '基座5个，脚架5个，高原气压表1个，对讲机4个，花杆2个，标芯5个，棱镜2个。', NULL, '2024-01-02', '2024-01-02');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750220', 33, 107, '108,108', '172,7', '1648881411499491372', '2023C56_长河坝水电站汤坝居民点和土地复垦外部引水工程地形地类图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-01-03', '2024-01-06', NULL, NULL, NULL, NULL, '2024-01-04', '2024-01-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750221', 149, 116, '111', '100', '1648881410631270458', '2024W08_国能四川阿水电力开发有限公司绰斯甲水电站工程测量中心技术服务（2024年）', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-02-19', '2024-02-19', NULL, NULL, '此设备需借用3个月左右', NULL, '2024-02-19', '2024-02-19');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750222', 83, 111, '106,213,18,165,100', '113,18,108,165,103', '1648881410631270433', '2024C11_双江口水电站可研阶段梭磨河松岗电站、热足电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-03-13', '2024-03-15', NULL, NULL, NULL, NULL, '2024-03-15', '2024-03-15');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750223', 95, 111, '107,155,150,143,140,114,167,220', '155,150,143,140,20,102,111,64,66,117', '1648881410631270436', '2024C14_JW梯级水电站白马西路河特殊过流影响专题研究工作断面测量工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-03-29', '2024-04-03', NULL, NULL, NULL, NULL, '2024-04-03', '2024-04-03');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750224', 73, 110, '106,100,98', '106,68,207', '1648881410899705858', '2023C24_岷江干流张坎航电枢纽工程界桩测设工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-03-29', '2023-03-29', NULL, NULL, '脚架两个，对中杆两根，对讲机两套，单棱镜一个，救生衣两件，PTK外挂电池盒一个', NULL, '2023-03-29', '2023-03-29');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750225', 32, 107, '153,66', '166,163', '1648881410778071042', '2023C29_ML坝址实景三维模型及库区电子沙盘制作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-04-20', '2023-04-20', NULL, NULL, NULL, NULL, '2023-04-20', '2023-04-20');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750226', NULL, 111, '65,11', '11,100', '1648881411499491384', '2023C44_老木孔水电站库区道路边沟坐标高程测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-05-29', '2023-05-29', NULL, NULL, '外业调绘及检查点测量', NULL, '2023-05-29', '2023-05-29');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750227', NULL, 115, '68,70,66,77,20,92', '117,66,77,20,11,100', '1648881410962620417', '2023C18_芦山抽水蓄能电站可研阶段地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-03-19', NULL, NULL, NULL, NULL, NULL, '2023-03-27', '2023-03-27');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750228', 61, 110, '66,110,65,75,199,144,146,157,48', '134,65,75,199,144,146,157,106,20', '1648881411499491355', '2023C73_雅江抽水蓄能电站规划阶段地形图测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-31', '2023-09-02', NULL, NULL, NULL, NULL, '2023-09-02', '2023-09-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750229', NULL, 111, '221', '207', '1648881411499491362', '2023C66_硬梁包水电站库区实物指标配合测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-14', NULL, NULL, NULL, '新增', NULL, '2023-08-14', '2023-08-14');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750230', 33, 107, '94,62', '65', NULL, '双江口实物指标调查', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-22', '2023-08-24', NULL, NULL, '2个花杆。', NULL, '2023-08-23', '2023-08-23');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750231', 94, 111, '100,100,106,157,110,156,143,47,46', '107,109,98,100,106,157,193,156,63', '1648881411499491342', '2023C87_中核汇能昭觉县264MW风电项目、宁南县49MW风电项目', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-11-02', '2023-11-06', NULL, NULL, '气压表1个、脚架4个、对讲机4套、对中杆4根、棱镜2个、GPS埋石标志12个、基座4个。', NULL, '2023-11-03', '2023-11-03');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750232', 95, 111, '74,66', '109,76,78,48', '1648881411235250178', '2023C05_ML及JW水电工程建设征地实物指标调查配合测量', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-11-06', '2023-11-08', NULL, NULL, NULL, NULL, '2023-11-07', '2023-11-07');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750233', 33, 107, '92', '117', '1648881411499491339', '2023C90_牙根二级水电站集镇新址、泥石流沟、取水线路地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '2023年11月15日早上加借1台大疆精灵4（0V2DGAB-0A30038）\n均已发放', NULL, '2023-11-14', '2023-11-16', NULL, NULL, '脚架1个，基座1个，对中杆1个。', NULL, '2023-11-14', '2023-11-15');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750234', 95, 111, '7,90', '130,87', '1648881410631270436', '2024C14_JW梯级水电站白马西路河特殊过流影响专题研究工作断面测量工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-03-31', '2024-04-02', NULL, NULL, NULL, NULL, '2024-04-01', '2024-04-01');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750235', 145, 115, '108,20', '113,104', '1648881410631270409', '2023W23_马来西亚东海岸铁路项目精测网复测', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-04-03', '2024-04-03', NULL, NULL, '数据传输线，充电器。不要电池。', NULL, '2024-04-03', '2024-04-03');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750236', 35, 107, '57,104,99,11,146,152,10', '11,107,109,108,153,144,200', '1648881410631270439', '2024C17_华电木里沙湾一期风电项目可研阶段地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-04-09', '2024-04-12', NULL, NULL, NULL, NULL, '2024-04-10', '2024-04-10');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750237', 109, 112, '90', NULL, '1648881410631270405', '2023W19_国网拉萨发电公司2023年直孔、羊湖电站变形监测及资料整编技术服务合同', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-03-06', '2024-03-07', NULL, NULL, '2024年西藏羊湖、直孔监测项目使用。', NULL, '2024-03-06', '2024-03-06');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750238', 35, 107, '11', '108,171', '1648881410694184962', '2023C33_色达抽蓄电站预可阶段测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-03-22', '2023-03-27', NULL, NULL, NULL, NULL, '2023-03-27', '2023-03-27');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750239', 33, 107, '163', '153', '1648881410480275457', '2023C39_理塘抽水蓄能电站规划阶段测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-04-18', '2023-04-18', NULL, NULL, '脚架1个，棱镜2个，基座1个。', NULL, '2023-04-18', '2023-04-18');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750240', 73, 110, '158', '10', '1648881410643853314', '2023W13_拉萨水环境项目测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-05-11', '2023-05-11', NULL, NULL, NULL, NULL, '2023-05-11', '2023-05-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750241', 145, 115, '31', '167', '1648881410631270402', '2023W16_泸定水电站2023年水库泥沙监测服务', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-05-25', '2023-05-25', NULL, NULL, NULL, NULL, '2023-05-25', '2023-05-25');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750242', 33, 107, '100', '64', '1648881410945843202', '2023C19_雅砻江楞古水电站地形地类图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-06-01', '2023-06-02', NULL, NULL, '基座一个', NULL, '2023-06-01', '2023-06-01');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750243', 138, 114, NULL, '76,79,76,153,106', '1648881415815430146', '2021C40_重庆轨道交通4号线西延伸段工程施工监测及控制测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-03-29', '2023-03-31', NULL, NULL, NULL, NULL, '2023-03-29', '2023-03-29');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750244', 144, 115, '154', '31,69', '1648881410660630529', '2023C34_阆中抽水蓄能电站规划阶段测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '增加两台平板电脑 R22M4001YJZ R22KB00564X\n均已发放', NULL, '2023-03-29', '2023-03-31', NULL, NULL, NULL, NULL, '2023-03-31', '2023-03-31');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750245', 95, 111, '65,98', '66,158', '1648881413244321794', '2022C23_江油抽水蓄能电站预可阶段测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-22', '2023-08-28', NULL, NULL, NULL, NULL, '2023-08-23', '2023-08-23');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750246', 145, 115, '106,64', '20,198', '1648881419045044225', '2019W33_美姑县扶贫项目土地整理区域1：2000高清正摄影像（DOM）制作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-28', '2023-08-29', NULL, NULL, '木脚架1个，5公斤尺垫1对，安全帽4个，反光背心4个。\n（美姑风电监测项目）', NULL, '2023-08-28', '2023-08-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750247', 109, 112, NULL, '114', '1648881410631270405', '2023W19_国网拉萨发电公司2023年直孔、羊湖电站变形监测及资料整编技术服务合同', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-09-04', '2023-09-04', NULL, NULL, NULL, NULL, '2023-09-04', '2023-09-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750248', 72, 110, '62,85,11,167', '62,11,85,70', '1648881411499491381', '2023C47_绵竹抽水蓄能电站界桩测设工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-11', '2023-08-14', NULL, NULL, NULL, NULL, '2023-08-11', '2023-08-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750249', 60, 110, '20,45,107', '46,45,143', '1648881411499491341', '2023C88_大邑抽水蓄能水电站可研阶段地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-11-06', '2023-11-07', NULL, NULL, '脚架2个，基座2台，对中杆1根，简易脚架1个，GPS刻字标志8个。', NULL, '2023-11-07', '2023-11-07');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750250', 84, 111, '59', '87,96,93', '1648881411499491384', '2023C44_老木孔水电站库区道路边沟坐标高程测量', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-11-10', '2023-11-14', NULL, NULL, NULL, NULL, '2023-11-13', '2023-11-14');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750251', 61, 110, '81,92,96,34,145', '34,84,82,92,176', '1648881411067478017', '2023C12_雅砻江两河口水电站水库泥沙监测系统建设工程、运行维护及泥沙淤积影响分析研究项目测量工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-11-17', '2023-11-17', NULL, NULL, NULL, NULL, '2023-11-17', '2023-11-17');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750252', 60, 110, '65', '194', '1648881411499491341', '2023C88_大邑抽水蓄能水电站可研阶段地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-11-20', '2023-11-27', NULL, NULL, NULL, NULL, '2023-11-24', '2023-11-24');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750253', 109, 112, '107,200', '106,213', '1648881410631270461', '2024W11_国网拉萨发电公司2024年直孔、羊湖电站变形监测及资料整编', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2024-03-07', '2024-03-08', NULL, NULL, NULL, NULL, '2024-03-08', '2024-03-08');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750254', 61, 110, '81,84,7,213,186,111,110', '81,84,177,213,186,109,107', '1648881410631270463', '2024W13_雅砻江、大渡河重要栖息地河段地形监测项目断面测量工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-05-11', '2024-05-13', NULL, NULL, NULL, NULL, '2024-05-11', '2024-05-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750255', 73, 110, '110,168', '99,164', '1648881410631270426', '2024C03_川藏铁路康定段三道桥放线配合测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-05-30', '2024-06-05', NULL, NULL, '对中杆1根', NULL, '2024-06-03', '2024-06-03');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750256', 145, 115, '207,111', '168,91', '1648881419045044225', '2019W33_美姑县扶贫项目土地整理区域1：2000高清正摄影像（DOM）制作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-04-07', '2023-04-12', NULL, NULL, '用于美姑风电监测。\n木脚架1个，尺垫2个（5斤重）。水准点标志10个。', NULL, '2023-04-10', '2023-04-10');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750257', 145, 115, '72,165,83,77,153,106', '72,78,83,77,31,98', '1648881411499491388', '2023C40_金阳施控网成果复核', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-04-27', '2023-05-01', NULL, NULL, '脚架6个，棱镜（带战牌）3个，气压表1个，对中杆1根，基座2个，gps标志10个，小电瓶4套，对讲机4套。', NULL, '2023-04-28', '2023-04-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750258', NULL, 111, '106,100', '4,106', '1648881411499491384', '2023C44_老木孔水电站库区道路边沟坐标高程测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-05-19', '2023-05-24', NULL, NULL, '后期补借', NULL, '2023-05-22', '2023-05-22');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750259', 61, 110, '61,213', '137', '1648881411067478017', '2023C12_雅砻江两河口水电站水库泥沙监测系统建设工程、运行维护及泥沙淤积影响分析研究项目测量工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-03-29', '2023-03-30', NULL, NULL, NULL, NULL, '2023-03-30', '2023-03-30');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750260', 139, 114, '184,101,99,143', '184,101,99,100', '1648881415815430146', '2021C40_重庆轨道交通4号线西延伸段工程施工监测及控制测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-09-04', '2023-09-12', NULL, NULL, '脚架2个，对中杆1根，花杆1根，单棱镜2个，简易脚架1个', NULL, '2023-09-04', '2023-09-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750261', 101, 112, '140', '92', '1648881410631270407', '2023W21_大渡河公司大岗山水电站大坝及库岸边坡监测设备设施完善工程合同', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-11', '2023-08-14', NULL, NULL, NULL, NULL, '2023-08-14', '2023-08-14');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750262', 145, 115, '114,205,206,207,120,122,195,108', '205,206,207,120,111,122,195,101', '1648881410631270409', '2023W23_马来西亚东海岸铁路项目精测网复测', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-09-04', NULL, NULL, NULL, '尺垫8个（5公斤）', NULL, '2023-09-04', '2023-09-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750263', 138, 114, '118', '100', '1648881415815430146', '2021C40_重庆轨道交通4号线西延伸段工程施工监测及控制测量', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-11-20', '2023-11-24', NULL, NULL, NULL, NULL, '2023-11-24', '2023-11-24');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750264', 61, 110, '200,194', '110,6', '1648881411499491341', '2023C88_大邑抽水蓄能水电站可研阶段地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-11-15', '2023-11-17', NULL, NULL, NULL, NULL, '2023-11-16', '2023-11-16');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750265', 116, 113, '90', '118', '1648881410631270404', '2023W18_美玉、田妥光伏项目工程地质勘察及地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-11-27', '2023-11-28', NULL, NULL, NULL, NULL, '2023-11-27', '2023-11-27');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750266', 103, 112, '121,107,213,9,140', '107,213,9,130,34', '1648881410631270422', '2023W36_大唐观音岩水电站2023年度变形监测控制网复测及坝前淤积和坝后冲刷测量项目', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-11-27', '2023-12-06', NULL, NULL, '对中杆1根；救生衣4件', NULL, '2023-12-02', '2023-12-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750267', 33, 107, '110,107', '', '1648881410631270441', '2024C19_色达抽水蓄能电站1:5000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-04-23', '2024-04-29', NULL, NULL, '调绘平板1、对中杆1、脚架1、基座1', NULL, '2024-04-28', '2024-04-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750268', 60, 110, '225,86,100', '118,225,108', '1648881410631270438', '2024C16_ML公路放线测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-04-28', '2024-04-29', NULL, NULL, '水准仪两台，水准尺一副，尺垫一对。', NULL, '2024-04-28', '2024-04-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750269', 145, 115, '65,18,61,221', '81,97,61,12', '1648881413948964865', '2022C01_猴子岩水电站地形图测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-04-29', '2024-04-29', NULL, NULL, '临时项目，GPS杆2根，脚架1个，基座1个，棱镜1个，小电瓶1套。', NULL, '2024-04-29', '2024-04-29');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750270', 33, 107, '93', '145', NULL, 'M300无人机测试', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2024-06-05', '2024-06-05', NULL, NULL, '到彭州天空之眼飞行基地进行无人机测试', NULL, '2024-06-05', '2024-06-05');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750271', 101, 112, '57,57,50,55,54,93,56,49,51,60,58,82,85', '57,59,49,50,53,18,60,55,58,51', '1648881414527778817', '2021C85_老木孔航电枢纽工程施工测量控制网建网及首次观测', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-04-27', '2023-04-29', NULL, NULL, NULL, NULL, '2023-04-28', '2023-04-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750272', 144, 115, '106', '77', '1648881411499491386', '2023C42_巴宜区62个行政村“多规合一”实用性村庄测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-05-09', '2023-05-11', NULL, NULL, NULL, NULL, '2023-05-09', '2023-05-09');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750273', 32, 107, '100', '154', '1648881410945843202', '2023C19_雅砻江楞古水电站地形地类图测绘', NULL, NULL, NULL, 10, '同意。', NULL, '已发放', NULL, '2023-05-09', '2023-05-10', NULL, NULL, NULL, NULL, '2023-05-10', NULL);
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750274', 46, 109, '45,106', '48,108,167', '1648881414410338305', '2021C89_芦山抽水蓄能电站预可阶段测绘', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-09-04', '2023-09-05', NULL, NULL, '配合成都院抽蓄项目检查验收。', NULL, '2023-09-04', '2023-09-05');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750275', 138, 114, '114', '81', '1648881415815430146', '2021C40_重庆轨道交通4号线西延伸段工程施工监测及控制测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-09-13', '2023-09-13', NULL, NULL, NULL, NULL, '2023-09-13', '2023-09-13');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750276', 94, 111, '156,143,87,65', '147,156,143,31', '1648881411499491354', '2023C74_攀枝花市仁和区南部一期280MW光伏项目1:500地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-09-28', '2023-10-09', NULL, NULL, NULL, NULL, '2023-10-07', '2023-10-07');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750277', 33, 107, '45,106,33,31,65', '74,73,199,98,155', '1648881411499491348', '甘孜乡城光伏项目（暂未登记OA）', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-10-05', '2023-10-08', NULL, NULL, '脚架4个，基座4个，对中杆1个，高原气压表1个，增高杆2个，对讲机4个。', NULL, '2023-10-08', '2023-10-08');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750278', 97, 111, '66,171,12,170,106', '149,140,200,220,176', '1648881411499491332', '2023C97_西藏江达鲁格一期120万kW光伏项目场址地形图测绘及初步工程地质勘察技术服务工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-12-07', '2023-12-15', NULL, NULL, NULL, NULL, '2023-12-11', '2023-12-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750279', 101, 112, '222', '200', '1648881410631270424', '2024C01_石棉县挖角集镇排洪渠1:1000地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2024-01-10', '2024-01-11', NULL, NULL, '现场调绘', NULL, '2024-01-11', '2024-01-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750280', 76, 110, '81', '98', '1648881410631270463', '2024W13_雅砻江、大渡河重要栖息地河段地形监测项目断面测量工作', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2024-06-05', '2024-06-07', NULL, NULL, NULL, NULL, '2024-06-05', '2024-06-05');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750281', 145, 115, '87,45,10,5', '11,10,206,12', '1648881411499491382', '2023C46_盐源抽蓄电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-04-11', '2024-04-15', NULL, NULL, '脚架2个，对中杆2根，带占牌棱镜2个，小电瓶2套，对讲机2套，高原气压计1个（编号111715），基座2个。', NULL, '2024-04-11', '2024-04-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750282', 145, 115, '87,88', '18,75', '1648881411499491384', '2023C44_老木孔水电站库区道路边沟坐标高程测量', NULL, NULL, NULL, 10, '同意。', 17, '设备已发放', NULL, '2024-04-22', '2024-04-23', NULL, NULL, '8米对中杆1根，小电瓶1套，救生衣2件，单棱镜1个，脚架1个。', NULL, '2024-04-22', '2024-04-23');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750283', 66, 110, '108,157,110', '93,157,18', '1648881410631270440', '2024C18_威远抽水蓄能电站预可阶段1:10000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-04-29', '2024-04-29', NULL, NULL, '救生衣3件，对中杆2根', NULL, '2024-04-29', '2024-04-29');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750284', 109, 112, '104,146', '88,87', '1648881410631270460', '2024W10_国网拉萨发电公司2024年羊湖电站取水口水位及压力钢管变形监测控制网复测校核', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-04-13', '2024-04-17', NULL, NULL, NULL, NULL, '2024-04-15', '2024-04-15');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750285', 145, 115, '31,72,83,66,61,132,63', '31,72,83,66,61,132,46', '1648881410631270402', '2023W16_泸定水电站2023年水库泥沙监测服务', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-05-12', '2023-05-12', NULL, NULL, '救生衣4件，安全帽4个，带占牌棱镜3个，对讲机4套，气压计1个，脚架6个，对中杆3根，测量标志20个。', NULL, '2023-05-12', '2023-05-12');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750286', 145, 115, NULL, '100', '1648881411499491383', '2023C45_川藏铁路泸定段征地拆迁安置规划设计项目1:500地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-05-19', '2023-05-25', NULL, NULL, NULL, NULL, '2023-05-22', '2023-05-22');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750287', 138, 114, '46', '63', '1648881415815430146', '2021C40_重庆轨道交通4号线西延伸段工程施工监测及控制测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-05-22', '2023-06-12', NULL, NULL, NULL, NULL, '2023-05-23', '2023-05-23');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750288', NULL, 111, '64,6', '139,100', '1648881411499491381', '2023C47_绵竹抽水蓄能电站界桩测设工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-05-24', '2023-05-26', NULL, NULL, NULL, NULL, '2023-05-24', '2023-05-25');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750289', 33, 107, '16,196', '196,36', '1648881411499491382', '2023C46_盐源抽蓄电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-05-31', '2023-06-01', NULL, NULL, '2个对中杆。', NULL, '2023-05-31', '2023-05-31');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750290', 81, NULL, '213', '159', '1648881412040556545', '2022W38_仪陇县林权数据整合建库采购项目政府采购合同', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-06-27', '2023-06-28', NULL, NULL, NULL, NULL, '2023-06-28', '2023-06-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750291', NULL, 111, '12,49,11', '66,12,20', NULL, '成都市蝶花街地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-10-10', '2023-10-13', NULL, NULL, '脚架一个，碳纤杆两根，棱镜一个，花杆一根', NULL, '2023-10-11', '2023-10-11');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750292', 83, 111, '108,147', '177,119', '1648881411235250178', '2023C05_ML及JW水电工程建设征地实物指标调查配合测量', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-10-19', '2023-10-21', NULL, NULL, NULL, NULL, '2023-10-20', '2023-10-20');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750293', 61, 110, '106,159,163,103', '108,159,163,149', NULL, '北川县高川乡清淤疏浚项目，暂未登记，按非项目生产用途申请设备。', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-09-18', NULL, NULL, NULL, NULL, NULL, '2023-09-18', '2023-09-19');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750294', 61, 110, '108,12', '107,65', '1648881411499491359', '2023C69_金沙江岗托水电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-10-19', '2023-10-21', NULL, NULL, NULL, NULL, '2023-10-20', '2023-10-20');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750295', 72, 110, '90,93,69,74,81,83,90', '92,96,6,158,155,154,64,61,113,15', '1648881410631270452', '2024W02_凤山平乐风电场地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2024-01-12', '2024-01-17', NULL, NULL, NULL, NULL, '2024-01-16', '2024-01-16');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750296', 32, 107, '176,143', '107,166', '1648881410631270451', '2024W01_重庆区县建成区实景三维制作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-01-04', '2024-01-05', NULL, NULL, '搭载OP3000', NULL, '2024-01-04', '2024-01-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750297', 33, 107, '123,98,154', '146,109,98', '1648881410631270443', '2024C21_四川省屏山书楼抽水蓄能电站工程区1:1000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-04-30', '2024-05-06', NULL, NULL, '脚架一个，基座1个，花杆1个', NULL, '2024-05-06', '2024-05-06');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750298', 94, 111, '92,99,10,12', '104,109,107,233', '1648881410631270449', '2024C27_亚龙水电站可研阶段地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-06-05', '2024-06-06', NULL, NULL, '脚架2副、对中杆2根、棱镜2个、气压表1个、对中基座2个。', NULL, '2024-06-06', '2024-06-06');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750299', 95, 111, '222,130', '104,18', '1648881410631270450', '2024C28_ML及JW界桩测设工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-06-17', '2024-06-18', NULL, NULL, NULL, NULL, '2024-06-17', '2024-06-17');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750300', 145, 115, '177', '90', '1648881410631270409', '2023W23_马来西亚东海岸铁路项目精测网复测', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-04-22', '2024-04-23', NULL, NULL, '墩标连接螺丝5个，基座2个，徕卡带占牌基座套装2套。', NULL, '2024-04-23', '2024-04-23');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750301', 63, 110, '99,18,99', '92,99,18,110', '1648881410631270445', '2024C23_山西省沁水县龙港抽水蓄能电站界桩测设等工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-05-15', '2024-05-21', NULL, NULL, NULL, NULL, '2024-05-17', '2024-05-17');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750302', 145, 115, '207,153,12,11,134,106', '153,12,20,113,111,98', '1648881411499491382', '2023C46_盐源抽蓄电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-07-04', '2023-07-08', NULL, NULL, '测量标志10个，脚架4个，基座4个，对讲机4套，棱镜4个（带占牌），尺垫2个。', NULL, '2023-07-05', '2023-07-05');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750303', 102, 112, '194,121,122,101', '49,53,213,55,101,56,54,130,201,114', '1648881410761293825', '2023W11_四川省盐源县测量标志普查维护工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-02', NULL, NULL, NULL, NULL, NULL, '2023-08-04', '2023-08-07');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750304', 112, NULL, '107,75,66,199,213,74', '102,155,66,199,213,100', '1648881410631270417', '2023W31_黄河干流四川段防洪治理工程初设阶段勘察工作', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-10-21', '2023-10-24', NULL, NULL, NULL, NULL, '2023-10-23', '2023-10-23');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750305', 71, 110, '9,11,15,7,200,86,88,87,100', '11,15,98,92,90,93,96,172', '1648881410631270423', '2023W37_大唐长河坝115万千瓦光伏项目1:2000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-02-19', '2024-02-21', NULL, NULL, '用于公司内部培训学习。', NULL, '2024-02-19', '2024-02-19');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750306', 35, 107, '110,87', '108,6', '1648881410631270451', '2024W01_重庆区县建成区实景三维制作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-02-27', '2024-02-28', NULL, NULL, NULL, NULL, '2024-02-27', '2024-02-27');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750307', 35, 107, '34,220', '106,162', '1648881410631270451', '2024W01_重庆区县建成区实景三维制作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-01-17', '2024-01-18', NULL, NULL, NULL, NULL, '2024-01-17', '2024-01-17');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750308', 145, 115, '117,65', '117,88,90', '1648881413948964865', '2022C01_猴子岩水电站地形图测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-06-03', '2024-06-06', NULL, NULL, '用于德方公司，培训学习', NULL, '2024-06-03', '2024-06-03');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750309', 72, 110, '94,34,154', '119,125,194,108,34,118,64', '1648881411499491375', '2023C53_岷江干流张坎航电枢纽工程排涝区域1:2000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-06-28', '2023-07-03', NULL, NULL, NULL, NULL, '2023-06-30', '2023-07-03');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750310', 145, 115, '100', '60', '1648881411499491382', '2023C46_盐源抽蓄电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-07-12', '2023-07-15', NULL, NULL, '救生衣4件。', NULL, '2023-07-13', '2023-07-13');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750311', 72, 110, '11,63,106', '11,145,146,149,151,63,207', '1648881411499491375', '2023C53_岷江干流张坎航电枢纽工程排涝区域1:2000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-07-20', '2023-07-21', NULL, NULL, NULL, NULL, '2023-07-20', '2023-07-21');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750312', 95, 111, '66,61,111,110,6,6,146,144,113', '66,61,64,110,108,146,144,20,74', NULL, '2023C77_国能阿水350MW光伏发电项目地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-09-18', '2023-09-20', NULL, NULL, NULL, NULL, '2023-09-18', '2023-09-19');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750313', 61, 110, '130,93,92', '113,130,110', '1648881411499491359', '2023C69_金沙江岗托水电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-09-26', '2023-09-27', NULL, NULL, NULL, NULL, '2023-09-27', '2023-09-27');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750314', 144, 115, '97,75,74,111,114,11,201,130,142,81,87,88,86', '86,87,97,75,74,111,114,11,201,130', '1648881412963303425', '2022W24_广西平那高速公路测量项目', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-02-20', '2024-02-22', NULL, NULL, NULL, NULL, '2024-02-20', '2024-02-20');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750315', 63, 110, '106,94', '220,93', '1648881410631270425', '2024C02_溪洛渡水电站永善移民配合测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-01-08', '2024-01-10', NULL, NULL, NULL, NULL, '2024-01-08', '2024-01-08');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750316', 71, 110, '164,92,96,97,86,87,144,146,15,152,6,8', '93,96,97,86,87,144,146,152,6,154', '1648881410631270465', '2024C29_南江兴马抽水蓄能电站可研阶段地形图测绘项目', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-06-19', '2024-06-20', NULL, NULL, NULL, NULL, '2024-06-19', '2024-06-19');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750317', 61, 110, '100,12,213,139,194,198', '213,139,101,106,11,65,199', '1648881411499491375', '2023C53_岷江干流张坎航电枢纽工程排涝区域1:2000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '加上2个GPS测量标志，已发放', NULL, '2023-07-03', '2023-07-04', NULL, NULL, '所借设备用于盐源县老沟水库地形图测绘，因项目未登记，挂靠到本项目。', NULL, '2023-07-04', '2023-07-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750318', 55, 109, '65,193', '64,100,66', '1648881410929065985', '2023C20_平昌抽水蓄能电站（苟家河库址）预可、可研阶段地形图测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-07-07', '2023-07-07', NULL, NULL, '地形图外业检查', NULL, '2023-07-07', '2023-07-07');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750319', 72, 110, '92,6,98', '6,108,58', '1648881411499491381', '2023C47_绵竹抽水蓄能电站界桩测设工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-07-17', NULL, NULL, NULL, NULL, NULL, '2023-07-17', '2023-07-17');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750320', 95, 111, '200,20,213,74,146,147,76,72,79,75,194', '200,213,144,146,76,72,75,78,158,11', '1648881411499491349', '2023C80_安徽西形冲抽水蓄能电站可研阶段地形图测绘项目', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-09-27', '2023-09-27', NULL, NULL, NULL, NULL, '2023-09-27', '2023-09-27');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750321', 33, 107, '4,170', '166,194', '1648881411499491372', '2023C56_长河坝水电站汤坝居民点和土地复垦外部引水工程地形地类图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-09-15', '2023-09-18', NULL, NULL, '长河坝项目新增任务：一个三脚架，一个对中杆，基座。', NULL, '2023-09-17', '2023-09-18');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750322', 95, 111, '6,224,63,107,102,170,144,146,142,87,64', '213,6,224,106,106,158,155,165,162,221', '1648881410631270429', '2024C06_安徽芜湖西形冲抽水蓄能电站建设征地界桩测设及居民点等地形地类图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-02-23', '2024-02-24', NULL, NULL, NULL, NULL, '2024-02-23', '2024-02-23');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750323', 32, 107, '97,93,152,177,176,165,168,110', '154,152,177,176,165,104,168,11,222', '1648881410631270444', '2024C22_牙根至楞古环保航拍项目', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-05-06', '2024-05-07', NULL, NULL, NULL, NULL, '2024-05-06', '2024-05-07');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750324', 81, NULL, '63,137,10', '16,108,165', '1648881412040556545', '2022W38_仪陇县林权数据整合建库采购项目政府采购合同', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-06-12', '2023-06-12', NULL, NULL, '仪陇多测合一项目', NULL, '2023-06-12', '2023-06-12');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750325', 145, 115, '167,11,61,100,176', '167,11,154,153,163', '1648881411499491383', '2023C45_川藏铁路泸定段征地拆迁安置规划设计项目1:500地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-06-24', '2023-06-25', NULL, NULL, '救生衣4件，安全帽4个，脚架1个，棱镜1个，小电瓶1个（全站仪用），安全绳', NULL, '2023-06-25', '2023-06-25');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750326', 145, 115, '108', '98,68', '1648881411499491373', '2023C55_泸定水电站坝流场数值模拟1:500地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-06-25', '2023-06-27', NULL, NULL, 'op300-5镜头，电池4组', NULL, '2023-06-26', '2023-06-26');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750327', 71, 110, '62,6,101', '6,200,146', '1648881411499491375', '2023C53_岷江干流张坎航电枢纽工程排涝区域1:2000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-07-01', '2023-07-03', NULL, NULL, '用于溪洛渡地块测量核实', NULL, '2023-07-03', '2023-07-03');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750328', 95, 111, '200,106,108,109', '9,106,92,144,100', '1648881411499491351', '2023C78_双江口混合式抽水蓄能电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-09-20', '2023-09-21', NULL, NULL, NULL, NULL, '2023-09-21', '2023-09-22');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750329', 55, 109, '109,69,65,172', '65,69,66,87', NULL, '2023C02-江油抽水蓄能电站可研阶段工程区地形图外业核实检查（配合成勘院）', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-10-08', '2023-10-11', NULL, NULL, '脚架3个、中海达碳钎杆2个', NULL, '2023-10-10', '2023-10-10');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750330', 33, 107, '103,102', '108,98', '1648881411499491347', '2023C82_叙州区抽水蓄能电站1:2000地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-10-11', '2023-10-12', NULL, NULL, '脚架1个、基座1个、对中杆1个', NULL, '2023-10-12', '2023-10-12');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750331', 63, 110, '46,87', '103,167', '1648881411499491353', '2023C75_金沙江波罗水电站集镇新址国省干道占地范围公路配合测量', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-10-17', '2023-10-19', NULL, NULL, '该设备用于拉萨市中心城区水系生态治理工程（二期）项目测绘生产', NULL, '2023-10-17', '2023-10-17');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750332', 95, 111, '108,102,213,168,200', '108,213,102,165,88', '1648881411499491351', '2023C78_双江口混合式抽水蓄能电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-01-24', '2024-01-28', NULL, NULL, NULL, NULL, '2024-01-24', '2024-01-24');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750333', 76, 110, '61,100,103,15,144,107', '61,103,109,20,93,92', '1648881410631270430', '2024C07_绵竹抽水蓄能电站技施阶段测绘工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-02-27', '2024-02-28', NULL, NULL, '2副脚架、2根对中杆、1个棱镜、1个基座', NULL, '2024-02-28', '2024-02-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750334', 33, 107, '176,168', '12,176', '1648881410631270431', '2024C08_猴子岩水电站江口村及周边1:1000地形地类图测绘', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2024-02-27', '2024-03-02', NULL, NULL, NULL, NULL, '2024-02-28', '2024-02-28');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750335', 145, 115, '66,64,61,29,28,145,149,222', '92,61,145,88,155,65,6,12,168', '1648881410631270466', '2024C30_理塘呷洼抽水蓄能电站预可阶段地形图测绘工作', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2024-06-20', NULL, NULL, NULL, '对中杆4根，基座5个，棱镜（带占牌）3个，电台2套（蓝色电台，电瓶，外接长天线）备用1，对讲机6个，控制点标志8个，反光背心6个。', NULL, NULL, NULL);
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750336', 138, 114, '101,12', '159,61', '1648881415815430146', '2021C40_重庆轨道交通4号线西延伸段工程施工监测及控制测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-07-17', '2023-07-25', NULL, NULL, NULL, NULL, '2023-07-17', '2023-07-17');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750337', 71, 110, '100,161', '106,62', '1648881411499491368', '2023C60_大渡河流域扩机电站坐标转换', NULL, NULL, NULL, 10, '同意。', NULL, '已发放', NULL, '2023-07-18', '2023-07-19', NULL, NULL, NULL, NULL, '2023-07-18', NULL);
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750338', 71, 110, '98,31,127', '106,31,99', '1648881411499491368', '2023C60_大渡河流域扩机电站坐标转换', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-07-25', '2023-07-26', NULL, NULL, '简阳项目借仪器', NULL, '2023-07-25', '2023-07-26');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750339', 145, 115, '207,65,66,159,163', '100,65,66,12,92,85', '1648881412963303425', '2022W24_广西平那高速公路测量项目', NULL, NULL, NULL, 10, '同意。', NULL, '已发放', NULL, '2023-07-27', '2023-07-28', NULL, NULL, '脚架6个，测量标志6个，尺垫2个，气压计1个，棱镜2套，小电瓶2套，基座6个。\n项目名称：西林至广南高速公路（安那隧道控制测量）。', NULL, '2023-07-27', NULL);
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750340', 116, 113, '66', '166', '1648881410610298882', '2023W14_苍溪抽水蓄能电站规划阶段工程勘察', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-10-19', '2023-10-20', NULL, NULL, '用于李家大院迁建项目，因该项目目前没有项目编码，现场急用，明天归还', NULL, '2023-10-20', '2023-10-20');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750341', 94, 111, '107,106,45,155,147,156,143,9,98', '106,20,147,156,143,157,98,109,147', '1648881411499491347', '2023C82_叙州区抽水蓄能电站1:2000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-10-20', '2023-10-26', NULL, NULL, '脚架4副、埋石标志7个、对讲机4套、对中杆4根、气压表1个、棱镜2个。', NULL, '2023-10-20', '2023-10-20');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750342', 71, 110, '93,200', '46,93', '1648881411499491359', '2023C69_金沙江岗托水电站地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-10-30', '2023-11-01', NULL, NULL, NULL, NULL, '2023-10-31', '2023-11-01');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750343', 33, 107, '177', '65', '1648881411499491372', '2023C56_长河坝水电站汤坝居民点和土地复垦外部引水工程地形地类图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-09-18', '2023-09-19', NULL, NULL, NULL, NULL, '2023-09-18', '2023-09-19');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750344', 49, 109, '7', '121', '1648881410631270426', '2024C03_川藏铁路康定段三道桥放线配合测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-01-16', '2024-01-16', NULL, NULL, '不借相机', NULL, '2024-01-16', '2024-01-16');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750345', 103, 112, '84,82', '130,90', '1648881410761293825', '2023W11_四川省盐源县测量标志普查维护工作', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-01-20', '2024-01-23', NULL, NULL, NULL, NULL, '2024-01-22', '2024-01-22');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750346', 71, 110, '93,96,167,199,20,102', '92,93,96,167,90,98', '1648881410631270423', '2023W37_大唐长河坝115万千瓦光伏项目1:2000地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-02-26', '2024-02-26', NULL, NULL, '用于丹巴格宗地形图测绘', NULL, '2024-02-26', '2024-02-26');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750347', 83, 111, '121', '109', '1648881411499491387', '2023C41_ML库区点位配合测量（配合基础设施分公司）', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2024-03-04', '2024-03-05', NULL, NULL, NULL, NULL, '2024-03-04', '2024-03-05');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750348', 144, 115, '166', '66', '1648881411499491386', '2023C42_巴宜区62个行政村“多规合一”实用性村庄测量', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-06-29', '2023-07-03', NULL, NULL, NULL, NULL, '2023-06-30', '2023-06-30');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750349', 71, 110, '85,61,6,166,108', '113,127,6,166,108', '1648881411499491367', '2023C61_吉牛水电站呷业沟地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, 'V90编号改为VA11604309 \n已发放', NULL, '2023-07-31', '2023-07-31', NULL, NULL, NULL, NULL, '2023-07-31', '2023-07-31');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750350', NULL, 111, '106,168,28,70', '106,168,20,63', '1648881411499491366', '2023C62_铜街子水电站坝后段及渣场1:500地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2023-08-01', '2023-08-02', NULL, NULL, NULL, NULL, '2023-08-01', '2023-08-01');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750351', 94, 111, '20,110,98,64,66,65,9', '108,64,66,65,61,20,65', '1648881411499491354', '2023C74_攀枝花市仁和区南部一期280MW光伏项目1:500地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-09-19', '2023-09-27', NULL, NULL, '对讲机3套、对中杆2根、脚架6个、气压表1个、棱镜3个。', NULL, '2023-09-22', '2023-09-25');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750352', 61, 110, '113,160,147,155', '108,160,75,93', '1648881410631270414', '2023W28_安州区黄洞子沟河道清淤项目测绘工作', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-09-21', '2023-09-25', NULL, NULL, NULL, NULL, '2023-09-21', '2023-09-22');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750353', 34, 107, '100,176', '87,200', '1648881411499491359', '2023C69_金沙江岗托水电站地形图测绘', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2023-10-07', '2023-10-12', NULL, NULL, '若尔盖踏勘使用', NULL, '2023-10-08', '2023-10-08');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750354', 63, 110, '9,162,113', '9,162,143', '1648881410631270426', '2024C03_川藏铁路康定段三道桥放线配合测量', NULL, NULL, NULL, 10, '同意', 17, '已发放', NULL, '2024-01-15', '2024-01-17', NULL, NULL, NULL, NULL, '2024-01-16', '2024-01-16');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750355', 33, 107, '166,222', '106,102', '1648881410631270452', '2024W02_凤山平乐风电场地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-01-16', '2024-01-18', NULL, NULL, '脚架1个，基座1个。', NULL, '2024-01-16', '2024-01-16');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750356', 63, 110, '162,20', '9,143', '1648881410631270427', '2024C04_大熊猫国家公园芦山县保护管理设施项目地形图测绘', NULL, NULL, NULL, 10, '同意。', 17, '加领1根8米杆，已发放', NULL, '2024-01-26', '2024-01-26', NULL, NULL, NULL, NULL, '2024-01-26', '2024-01-26');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750357', 61, 110, '139,98', '107,64', '1648881411067478017', '2023C12_雅砻江两河口水电站水库泥沙监测系统建设工程、运行维护及泥沙淤积影响分析研究项目测量工作', NULL, NULL, NULL, 10, NULL, 17, '已发放', NULL, '2024-03-01', '2024-03-05', NULL, NULL, '设备为拉萨水环境项目使用，因项目为登记，在本项目申领。', NULL, '2024-03-04', '2024-03-04');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750358', 71, 110, '143,222', '199,96', '1648881410631270431', '2024C08_猴子岩水电站江口村及周边1:1000地形地类图测绘', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-02-27', '2024-02-27', NULL, NULL, NULL, NULL, '2024-02-27', '2024-02-27');
INSERT INTO `cmc_device_approval` VALUES ('1648881411159750359', 103, 112, '4,201,205', '4,201,205', '1648881410631270467', '2024W15_水口集团公司水口电站2024年大坝控制网复测服务', NULL, NULL, NULL, 10, '同意。', 17, '已发放', NULL, '2024-06-28', '2024-06-28', NULL, NULL, NULL, NULL, '2024-06-28', '2024-06-28');
-- INSERT INTO `cmc_device_approval` VALUES ('1648881411159750360', 37, 107, '99,106,107,108,109,110,155,162,164,170,171,176,181', '108,109,145,147,149,162,164,176,220,221,222,223', '1648881410631270469', '2024W16_莎车县2024年村庄规划编制-测绘标段（第一包、第二包）', NULL, NULL, NULL, NULL, NULL, 17, '已发放', NULL, '2024-06-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL);

-- ----------------------------
-- 30、cmc用户历史表
-- ----------------------------
drop table if exists `cmc_user_history`;
create table `cmc_user_history`  (
  history_id		int				not null	auto_increment 	comment '历史id',
  user_id			bigint			default null				comment '用户id',
  dept_id			bigint			default null			   comment '部门id',
  pm_level			char(1)			default null			   comment '项目经理级别（0一、1二、2三）',
  titles			char(2)			default null				comment '技术职称（0正高、1副高、2中级、3助工）',
  certificates		varchar(9)		default null				comment '执业证书（0注测、1注规、2注岩、3注安、4注会）',
  roleIds			varchar(9)		default null				comment '角色',
  postIds			varchar(9)		default null				comment '岗位',
  engineer_level	char(1)			default null			   comment '工程师岗级（0一级、1二级、2三级、3四级、4五级、5六级）',
  post_level		char(1)			default null			   comment '岗级（0一岗、1二岗、2三岗、3四岗、4五岗、5六岗、6七岗、7八岗）',
  salary_level		char(1)			default null			   comment '薪档（0一级、1二级、2三级、3四级、4五级、5六级、6七级、7八级）',
  operator_level	char(1)			default null			   comment '技工等级（0一级、1二级、2三级）',
  political_affiliation varchar(5)	default null				comment '政治面貌',
  graduate_school 	varchar(20) 	default null				comment '毕业院校',
  major 			varchar(20) 	default null				comment '专业',
  degree 			char(1) 		default null				comment '学历',
  contract_sign 	date			default null				comment '合同签订',
  contract_expire 	date			default null				comment '合同期满',
  update_time		datetime		default null				comment '更新时间',
  update_reason		char(1) 		default null				comment '更新原因（0误录修改、1正常调整）',
  primary key (`history_id`)
) engine = innodb comment = 'cmc用户历史表';

-- ----------------------------
-- 初始化-用户历史表数据
-- ----------------------------

-- ----------------------------
-- 31、cmc岗位工资表
-- ----------------------------
drop table if exists `cmc_post_salary`;
create table `cmc_post_salary`  (
  `salary_id`		int				not null	auto_increment	comment '成本id',
  `post_level`		char(1)			default null				comment '岗级',
  `salary_level`	char(1)			default null				comment '薪档',
  `salary`			decimal(10, 2)	default null				comment '月薪',
  primary key (`salary_id`)
) engine = innodb comment = 'cmc岗位工资表';

-- ----------------------------
-- 初始化-岗位工资表数据
-- ----------------------------
insert into `cmc_post_salary` values (1, '0', '0', 300.00);
insert into `cmc_post_salary` values (2, '0', '1', 340.00);
insert into `cmc_post_salary` values (3, '0', '2', 380.00);
insert into `cmc_post_salary` values (4, '0', '3', 420.00);
insert into `cmc_post_salary` values (5, '1', '0', 440.00);
insert into `cmc_post_salary` values (6, '1', '1', 500.00);
insert into `cmc_post_salary` values (7, '1', '2', 560.00);
insert into `cmc_post_salary` values (8, '1', '3', 620.00);
insert into `cmc_post_salary` values (9, '1', '4', 680.00);
insert into `cmc_post_salary` values (10, '1', '5', 740.00);
insert into `cmc_post_salary` values (11, '2', '0', 560.00);
insert into `cmc_post_salary` values (12, '2', '1', 640.00);
insert into `cmc_post_salary` values (13, '2', '2', 720.00);
insert into `cmc_post_salary` values (14, '2', '3', 800.00);
insert into `cmc_post_salary` values (15, '2', '4', 880.00);
insert into `cmc_post_salary` values (16, '2', '5', 960.00);
insert into `cmc_post_salary` values (17, '2', '6', 1040.00);
insert into `cmc_post_salary` values (18, '2', '7', 1120.00);
insert into `cmc_post_salary` values (19, '3', '0', 880.00);
insert into `cmc_post_salary` values (20, '3', '1', 1020.00);
insert into `cmc_post_salary` values (21, '3', '2', 1160.00);
insert into `cmc_post_salary` values (22, '3', '3', 1300.00);
insert into `cmc_post_salary` values (23, '3', '4', 1440.00);
insert into `cmc_post_salary` values (24, '3', '5', 1580.00);
insert into `cmc_post_salary` values (25, '3', '6', 1720.00);
insert into `cmc_post_salary` values (26, '3', '7', 1860.00);
insert into `cmc_post_salary` values (27, '4', '0', 1700.00);
insert into `cmc_post_salary` values (28, '4', '1', 1860.00);
insert into `cmc_post_salary` values (29, '4', '2', 2020.00);
insert into `cmc_post_salary` values (30, '4', '3', 2180.00);
insert into `cmc_post_salary` values (31, '4', '4', 2340.00);
insert into `cmc_post_salary` values (32, '4', '5', 2500.00);
insert into `cmc_post_salary` values (33, '4', '6', 2660.00);
insert into `cmc_post_salary` values (34, '4', '7', 2820.00);
insert into `cmc_post_salary` values (35, '5', '0', 2640.00);
insert into `cmc_post_salary` values (36, '5', '1', 2820.00);
insert into `cmc_post_salary` values (37, '5', '2', 3000.00);
insert into `cmc_post_salary` values (38, '5', '3', 3180.00);
insert into `cmc_post_salary` values (39, '5', '4', 3360.00);
insert into `cmc_post_salary` values (40, '5', '5', 3540.00);
insert into `cmc_post_salary` values (41, '5', '6', 3720.00);
insert into `cmc_post_salary` values (42, '5', '7', 3900.00);
insert into `cmc_post_salary` values (43, '6', '0', 3700.00);
insert into `cmc_post_salary` values (44, '6', '1', 3900.00);
insert into `cmc_post_salary` values (45, '6', '2', 4100.00);
insert into `cmc_post_salary` values (46, '6', '3', 4300.00);
insert into `cmc_post_salary` values (47, '6', '4', 4500.00);
insert into `cmc_post_salary` values (48, '6', '5', 4700.00);
insert into `cmc_post_salary` values (49, '6', '6', 4900.00);
insert into `cmc_post_salary` values (50, '6', '7', 5100.00);
insert into `cmc_post_salary` values (51, '7', '0', 4880.00);
insert into `cmc_post_salary` values (52, '7', '1', 5100.00);
insert into `cmc_post_salary` values (53, '7', '2', 5320.00);
insert into `cmc_post_salary` values (54, '7', '3', 5540.00);
insert into `cmc_post_salary` values (55, '7', '4', 5760.00);
insert into `cmc_post_salary` values (56, '7', '5', 5980.00);
insert into `cmc_post_salary` values (57, '7', '6', 6200.00);
insert into `cmc_post_salary` values (58, '7', '7', 6420.00);

-- ----------------------------
-- 32、cmc投标管理表
-- ----------------------------
drop table if exists `cmc_tender`;
create table `cmc_tender`  (
  `tender_id` 			int auto_increment not null 	comment '投标id（2024-001）',
  `project_name` 		varchar(50)  	default null 	comment '投标项目名称',
  `party_a_name` 		varchar(50)		default null 	comment '招标业主',
  `a_person` 			varchar(50)  	default null 	comment '业主联系人',
  `a_phone` 			varchar(50)  	default null 	comment '业主联系电话',
  `agent` 				varchar(50)  	default null 	comment '招标代理',
  `agent_person` 		varchar(50)  	default null 	comment '代理联系人',
  `agent_phone` 		varchar(50)  	default null 	comment '代理联系电话',
  `place` 				varchar(50)  	default null 	comment '招标地点',
  `dept` 				bigint 			default null 	comment '投标部门',
  `trustee` 			bigint 			default null 	comment '投标委托人',
  `budget` 				decimal(10, 2) 	default null 	comment '业主预算',
  `quote` 				decimal(10, 2) 	default null 	comment '拟报价金额',
  `deposit` 			decimal(10, 2) 	default null 	comment '保证金',
  `tender_time` 		date 			default null 	comment '投标时间',
  `bid_buy_deadline` 	date 			default null 	comment '标书购买截止时间',
  `bid_website` 		varchar(255)  	default null 	comment '招标信息网址',
  `bid_document` 		varchar(255)  	default null 	comment '招标文件',
  `project_briefly` 	text  			default null 	comment '项目内容简述',
  `business_writer` 	bigint 			default null 	comment '商务标书编写人',
  `business_deadline` 	date 			default null 	comment '商务标书要求提交时间',
  `tech_writer` 		bigint 			default null 	comment '技术标书编写人',
  `tech_deadline` 		date 			default null 	comment '技术标书要求提交时间',
  `tender_combiner` 	bigint 			default null 	comment '标书合稿人',
  `tender_checker` 		bigint 			default null 	comment '标书检查人',
  `tender_printer` 		bigint 			default null 	comment '标书打印装订人',
  `tender_document` 	varchar(255)  	default null 	comment '标书文件',
  primary key (`tender_id`)
) engine = innodb comment = 'cmc投标管理表';

-- ----------------------------
-- 初始化-投标管理表数据
-- ----------------------------
INSERT INTO `cmc_tender` VALUES (1, '泸县2021年耕地“进出平衡”目标考核整改专项工作', '泸县自然资源和规划局', '张先生', '0830-8191923', '四川玖帆建设工程有限公司', '陈先生', '15984005550', '泸州市龙马潭区泸州市旅游集散中心底楼', 105, 59, 720000.00, NULL, NULL, '2023-01-03', '2022-12-30', 'https://zfcg.scsczt.cn/', NULL, NULL, 25, '2023-01-03', 55, '2023-01-03', 25, 23, 25, NULL);
INSERT INTO `cmc_tender` VALUES (2, '宁南县自然资源局采购宁南县测量标志普查维 护项目实施单位', '宁南县自然资源局', '王先生', '0834-4572072', '四川卓西建筑工程有限公司', '王老师', '0834-5208061', '四川省凉山彝族自治州西昌市湿地三期团结安 置小区 3 栋 1 单元 8 楼五号', 105, 21, 700000.00, NULL, NULL, '2023-01-06', '2022-12-30', 'https://zfcg.scsczt.cn/freecms/site/sichuan/ggxx/info/2023/8a69c98a858274bc01859a9e52bf205d.html?not', NULL, '技术要求：\n（一）测量标志普查。\n（二）测量标志维护参照国家级测量标志保护方案和凉山州规自 局测量标志保护的工作方案，对 53 座控制点进行分级分类。\n（三）测量标志委托保管。\n（四）汇总普查维护资料档案。\n商务要求：\n（一）服务时间：依据凉山州自然资源局文件要求，于 2022 年12 月前全面完成测量标志普查工作，2023 年 9 月前完成全面重建或 迁建的水准点高程联测、大地点坐标测量工作，获得重建或迁建的测 量标志的坐标成果。\n（二）服务地点：采购人指定地点。\n（三）验收标准：成交人与采购人应严格执行《财政部关于进一 步加强政府采购需求和履约验收管理的指导意见》（财库〔2016〕205 号）等相关规定的要求进行验收。\n（四）支付方式：合同签订后 7 日内支付合同价款的 20%；完成 测量标志普查工作后 7 日内支付合同价款的 30%；完成测量标志维护 工作后 7 日内支付合同价款的 40%；项目通过采购人组织的验收后 7 日内支付合同价款的 10%。', 24, '2023-01-04', 24, '2023-01-04', 24, 23, 24, NULL);
INSERT INTO `cmc_tender` VALUES (3, '江北园区及外围酿酒车间管（线）、沟网及地形图测绘项目', '宜宾五粮液股份有限公司', '吕垠江', '0831-3566099', '宜宾五粮液股份有限公司', NULL, NULL, '电子标', 105, 24, 2689500.00, NULL, 5000.00, '2023-01-09', '2023-01-04', '五粮液电子招标采购平台', NULL, '项目名称：江北园区及外围酿酒车间管（线）、沟网及地形图测绘项目\n内容：对江北园区及外围酿酒车间管（线）、沟网及地形图进行测绘或更新，便于以后统一规划、维修及管理。管（线）、沟网探测工作量约400公里，管（线）、沟网探测工作量约400公里，本项目涉及面积约5.2平方公里，需在我公司现有地形图的基础上对有变动的区域进行更新。', 24, '2023-01-06', 55, '2023-01-06', 24, 23, 24, NULL);
INSERT INTO `cmc_tender` VALUES (4, 'CPECC西南分公司2023-2025年度勘察设计战略合作单位年度框架协议', '中国石油工程建设有限公司西南分公司', '黄旭', '028-82978314', '中国石油工程建设有限公司西南分公司', NULL, NULL, '电子标', 105, 23, 0.00, NULL, NULL, '2023-01-17', '2023-01-03', 'https://ebidmanage.cnpcbidding.com', NULL, '1、第8标段：测绘航空摄影、摄影测量与遥感\n测绘航空摄影、摄影测量与遥感及相关服务，包括但不限于：\n测绘航空摄影、摄影测量主要包括空域申报、航空摄影、像控测量及调绘、空三测量、线路带状图测绘、线路纵断面测绘、大面积单体测绘等，机载LiDAR还应包括相应的点云数据处理。遥感主要包括：影像购置、影像解译、像控测量（如需要）、影像校正、镶嵌、融合、匀色等，并按项目要求采集DEM、DLG等。', 24, '2023-01-13', 55, '2023-01-13', 24, 23, 24, NULL);
INSERT INTO `cmc_tender` VALUES (5, '泸县2022年度国土变更调查及日常变更工作', '泸县自然资源和规划局', '张先生', '0830-8191923', '四川德才汇招标代理有限公司', '王先生', '0830-3198806', '四川德才汇招标代理有限公司（泸州市龙马潭区云台路69号城北公交枢纽站底楼）', 105, 59, 4800000.00, NULL, NULL, '2023-01-19', '2023-01-06', 'https://zfcg.scsczt.cn', NULL, '1. 在 2021年度国土变更调查成果基础上，按照《四川省国土变更调查日常变更实施方案（试行）》（详见川自然资办发〔2022〕410 号通知附件）要求，开展日常变更调查工作。\n2.在2021年度国土变更调查成果基础上，分析本年度县级耕地流出情况，提取并下发耕地恢复整治线索图斑，并对各镇（街）恢复整改情况，开展恢复耕地专项调查。\n3.在部下发的2022年度正射影像图基础上，叠加监测图斑、管理数据和其他相关数据，制作泸县2022年度国土变更调查工作底图（以下简称“工作底图”）。\n4.土地利用现状变化调查，以实地现状认定地类为原则，对工作底图开展全图斑调查。\n5.利用“天府调查云”2022年度变更调查举证模块进行实地外业举证，调查时使用带卫星定位和方向传感器的设备，利用“互联网+”举证软件，对需举证的图斑地块拍摄包含图斑坐标、拍摄方位角、拍摄时间、实地照片及举证说明等综合信息，形成加密举证数据包，上传至全省统一的举证平台。\n6.城镇村庄内部细化调查。充分利用地籍调查和不动产登记成果，开展 2022 年度变更调查城镇村庄内部土地利用现状调查。\n7.调查权属界线变化补充调查。根据日常确权登记工作掌握的权属变化情况，开展 2022 年度变更调查权属更新', 23, '2023-01-19', 56, '2023-01-19', 23, 22, 23, NULL);
INSERT INTO `cmc_tender` VALUES (6, '简阳市规划和自然资源局简阳市2022年测绘类服务采购项目', '简阳市规划和自然资源局', '宋老师', '028-27222351', '四川同创建设工程管理有限公司', '蒋女士', '028-87655071', '四川省成都市金牛区兴科中路西物之芯3楼303号本项目会议室', 105, 23, 740000.00, NULL, NULL, '2023-02-01', '2023-01-19', 'www.ccgp-sichuan.gov.cn', NULL, '（第一包）本项目主要工作内容包含：已有测绘基础数据内业整理及分析检验、坐标系转换软件研发建设、外业实测数据核验、数据及软件产品质量监督检验等相关工作内容。', 23, '2023-02-01', 57, '2023-02-01', 23, 24, 23, NULL);
INSERT INTO `cmc_tender` VALUES (7, '国网西藏电力有限公司拉萨发电公司2023年第1次非物资竞争性谈判授权采购项目采购', '国网西藏电力有限公司拉萨发电公司', NULL, NULL, '西藏慧联电力实业有限公司', '刘经理', '0891-6894347', '国网ecp2.0电子商务平台', 105, 25, 954000.00, NULL, NULL, '2023-02-08', NULL, 'http://ecp.sgcc.com.cn/ 国家电网电子商务平台', NULL, ' 说明：保证金为投标保证金保险，金额70元。70元不退还', 25, '2023-02-07', 48, '2023-02-07', 25, 25, 25, NULL);
INSERT INTO `cmc_tender` VALUES (8, '铜钟电站大坝、厂房及库区边坡安全监测等2个项目', '国网四川岷江供电有限责任公司', NULL, NULL, '四川西星电力科技咨询有限公司', '郭女士', '02887195333', '四川省都江堰市永安大道北一段映秀湾水电站业务用房412室', 105, 23, 1178000.00, NULL, NULL, '2023-02-08', '2023-02-03', 'https://ecp.sgcc.com.cn/ecp2.0/portal/#/', NULL, NULL, 23, '2023-02-08', 57, '2023-02-08', 23, 24, 23, NULL);
INSERT INTO `cmc_tender` VALUES (9, '青羊区建管并举文旅线路风貌提升改造项目测绘服务', '成都青羊城乡建设发展有限公司', '罗浩', '13880242605', NULL, NULL, NULL, NULL, 105, 24, 200000.00, NULL, NULL, '2023-02-15', '2023-02-10', NULL, NULL, '建筑立面测绘服务、1:500地形图测绘服务.', 24, '2023-02-17', 24, '2023-02-17', 24, 24, 24, NULL);
INSERT INTO `cmc_tender` VALUES (10, '新能源前期咨询服务框架采购（第四批）', '中国华电集团有限公司重庆分公司及所属企业', NULL, NULL, '中国华电集团有限公司重庆分公司', '何国斌', '023-88308822', '中国华电集团公司电子商务平台', 105, 25, 0.00, NULL, NULL, '2023-02-15', NULL, 'http://www.chdtp.com/', NULL, NULL, 25, '2023-02-15', 57, '2023-02-07', 25, 25, 25, NULL);
INSERT INTO `cmc_tender` VALUES (11, '阳东至阳江港高速公路项目公司测绘工程', '阳江市中申高速公路投资有限公司阳东至阳江港高速公路项目公司', NULL, NULL, NULL, NULL, NULL, NULL, 105, 23, 1350000.00, NULL, NULL, '2023-02-17', NULL, NULL, NULL, '阳东至阳江港高速公路项目公司测绘工程合同的施工任务，其中包括以下内容：航拍正摄图、E级GPS控制点(含高程)、水准测量、GPS-RTK一级点、1:2000地形图测量、纵横断 面测量测绘工程等相关施工任务', 23, '2023-02-17', 23, '2023-02-17', 23, 23, 23, NULL);
INSERT INTO `cmc_tender` VALUES (12, '青海公司玛尔挡水电站水库泥沙监测服务', '国能青海黄河玛尔挡水电开发有限公司', '李轩', '14797769567', '国家能源集团国际工程咨询有限公司', '闫磊', '0991-6809080', '国家能源招标网（网上投标）', 105, 7, 6470000.00, NULL, 100000.00, '2023-03-20', '2023-03-01', 'http://www.chnenergybidding.com.cn', NULL, '中标服务费：53996.15元     履约保证金：履约保函（中标金额的10%（不含暂列金））', 25, '2023-03-17', 57, '2023-03-16', 25, 23, 25, NULL);
INSERT INTO `cmc_tender` VALUES (13, '泸定水电站2023年水库泥沙监测服务项目', '四川华电泸定水电有限公司', '蒲姝颖', '13996810905', NULL, NULL, NULL, '线上开标', 105, 23, 200000.00, NULL, NULL, '2023-03-22', NULL, NULL, NULL, '1. 项目概况：2022年5月，泸定水电站通过枢纽工程竣工安全鉴定，为落实竣工安全鉴定报告建议，加强库区泥沙监测，分析库区淤积变化情况，并掌握4年来库区泥沙淤积变化情况和校核水位库容曲线，以进一步指导、优化水库调度方式，现需外委开展开展2023年水库泥沙监测工作。\n2. 项目地点：泸定水电站。\n3. 项目服务期限：总工期60个日历天，其中现场作业时间7个日历天，计划开工日期为2023年4月，具体实施时间以泸定公司通知为准。\n4.采购内容：包括泥沙监测断面测量；泥沙监测断面设施检查、修复、基准点校核；水尺检查、校核和修复；测量资料整编；水库泥沙淤积、下游河道冲刷及水位分析，库容分析等，具体详见本项目技术规范书。', 23, '2023-03-22', 57, '2023-03-22', 23, 23, 23, NULL);
INSERT INTO `cmc_tender` VALUES (14, '乐山市市本级重点区域2021-2023年度自然资源统一确权登记', '乐山市自然资源和规划局', '马老师', '0833-2401721', '四川盛大招标代理有限公司', '冯先生', '0833-2424118', '乐山市市中区嘉州大道625号', 105, 27, 5576519.00, NULL, NULL, '2023-04-03', '2023-03-20', NULL, NULL, '1.确定自然资源登记范围，划定登记单元。明确各项目的基本情况，分析各项目基本特性，依据《自然资源统一确权登记暂行办法》等要求,收集整理相关资料，制作工作底图。充分利用第三次全国国土调查、自然资源专项调查、集体土地所有权确权登记、水资源专项调查、水利普查、探明储量的矿产资源登记数据等现有成果，制定科学实用的技术路线和技术方法，确定自然资源统一确权登记范围,预划自然资源登记单元对重难点，问题提出技术解决方案，并实地核实登记单元界线。\n2.核实权籍调查成果，划清“四条边界”。对权籍调查形成的重要界址点和权属纠纷界限进行实地核实处理，清晰界定自然保护区范围内各类自然资源资产的所有权主体，划清全民所有和集体所有之间的边界，划清全民所有、不同层级政府行使所有权之间的边界，划清不同集体所有者的边界，划清不同类型自然资源之间的边界。\n3.数据上图入库,协助完成登簿。将调查成果数据登记信息系统,形成登记数据库,制作成果图件，探索三维登记模式。协助完成审核、公示和登簿工作。', 23, '2023-04-03', 57, '2023-04-03', 23, 24, 23, NULL);
INSERT INTO `cmc_tender` VALUES (15, '双流黄龙溪镇非建设流转用地地形测绘', '成都市锦上溪建设发展有限公司', '姚先生', '028-87596051', '华春建设工程项目管理有限责任公司', '李先生', '028-63047730', '成都市金牛区侯家桥路129号本项目开标室', 105, 23, 567229.25, NULL, 5000.00, '2023-04-04', NULL, NULL, NULL, '1.项目名称：双流黄龙溪镇非建设流转用地地形测绘。\n2.项目地点：成都市双流区黄龙溪镇川江村。\n3.项目规模：双流黄龙溪镇非建设流转用地一期集建用地占地约130亩，流转用地约2000亩。\n4.资金来源：企业自筹。\n5.质量要求：测量技术要求，符合《工程测量规范》（GB50026）、《城市测量规范》（CJJ/T 8）、《全球定位系统（GPS）测量规范》（GB/T18314）、《1:500、1:1000、1:2000地形图图式》（GB/T20257.1）、以及国家、四川省、成都市现行其他规范或技术标准。\n6.服务期限：20个工作日。\n7.询价范围：双流黄龙溪镇非建设流转用地范围内的1：500地形图测绘，影像测绘（含正射影像及倾斜摄影），土地分类面积测绘等。\n8.标段划分：1个标段。', 23, '2023-04-04', 57, '2023-04-04', 23, 23, 23, NULL);
INSERT INTO `cmc_tender` VALUES (16, '南江县天然气管网及储气设施改造项目测绘服务采购', '南江县长赤城乡建设投资开发有限公司', '白', '0827-8280616', '成都千一工程项目咨询有限公司', '张', '028-61501001', '巴中市巴州区', 105, 25, 498000.00, NULL, NULL, '2023-04-10', '2023-04-07', 'http://www.ccgp.gov.cn/', NULL, '改造巴中至南江县城4MP天然气管网70公里，改建集州街道至赶场镇、流坝社区燃气管网50公里，改造集州街道、沙河镇、公山镇等老旧供气支管网120公里;新建储气调蓄设施2处，配套相关附属设施。\n完成南江县天然气管网及储气设施改造项目的测绘服务。', 24, '2023-04-08', 57, '2023-04-08', 24, 25, 24, NULL);
INSERT INTO `cmc_tender` VALUES (17, '成都市锦江区公园城市建设和城市更新局锦江区2023年度耕地“非粮化”“撂荒地”技术服务项目', '成都市锦江区公园城市建设和城市更新局 ', '彭老师', '028-86927657 ', '四川中汇恒工程项目管理咨询有限公司', NULL, '028-85558473', '四川省成都市武侯区太平园中四路大合仓星商界4栋3单元310号', 105, 26, 200000.00, NULL, NULL, '2023-04-11', '2023-04-06', NULL, NULL, NULL, 26, '2023-04-11', NULL, '2023-04-11', 26, NULL, 26, NULL);
INSERT INTO `cmc_tender` VALUES (18, '巴福大健康组团路网一标段第三方监测外协', '重庆市勘测院', '刘春林', '15922726662', '重庆市勘测院', '刘春林', '15922726662', '重庆市两江新区青竹东路6号重庆市勘测院533会议室', 105, 138, 2150000.00, NULL, NULL, '2023-04-11', '2023-04-07', NULL, NULL, NULL, 25, '2023-04-08', 25, '2023-04-08', 25, 25, 25, NULL);
INSERT INTO `cmc_tender` VALUES (19, '2023年-2024年度航测内业技术服务框架协议采购', '中国能源建设集团云南省电力设计院有限公司', '罗俊毅', '13388710396', NULL, NULL, NULL, '线上开标', 105, 23, 0.00, NULL, NULL, '2023-04-12', NULL, NULL, NULL, '预估工作量    1:500数字线划地图（DLG）生产	250km&sup2;	不含空三\n1:2000数字线划地图（DLG）生产	400km&sup2;	不含空三', 23, '2023-04-12', 57, '2023-04-12', 23, 24, 23, NULL);
INSERT INTO `cmc_tender` VALUES (20, '老挝芭莱水电站激光雷达数据及影像采集', '中国电建集团市政规划设计研究院有限公司', '刘祜昌', '13700659698', NULL, NULL, NULL, '发送到邮箱', 105, 23, 0.00, NULL, NULL, '2023-04-14', NULL, NULL, NULL, '（一）工作范围\n巴莱水电站库区，高程260m以下范围，影像采集面积297km²见下图。\n（二）主要工作内容\n1．水库区激光点云数据采集\n2、水库区优于0.2m分辨率彩色影像采集\n3．激光点云数据处理', 23, '2023-04-14', 23, '2023-04-14', 23, 23, 23, NULL);
INSERT INTO `cmc_tender` VALUES (21, '重庆公司两江公司大堡梁风电场扩建项目地形图测绘咨询服务', '国能重庆两江新区新能源开发有限公司', NULL, NULL, '国家能源集团物资有限公司西南配送中心', '李德晗', '4000104000-1-7287', '国家能源e购（网上投标）', 105, 25, 0.00, NULL, NULL, '2023-04-17', '2023-04-17', NULL, NULL, NULL, 25, '2023-04-16', 25, '2023-04-16', 25, 25, 25, NULL);
INSERT INTO `cmc_tender` VALUES (22, '三圣街道办事处拆迁航拍、测绘服务项目', '成都市锦江区人民政府三圣街道办事处', '安', '028-84675036', '四川问道工程管理咨询有限公司', '彭', '028-83280238', '成都市武侯区二环路南三段 5 号人南大厦 B 座', 105, 24, 0.00, NULL, NULL, '2023-04-27', '2023-04-23', '锦江区公众信息网', NULL, '对三圣街道办事处辖区内部份土地（1:500 的比例尺零散地块航拍面积预计 5000 亩；1:500 房产面积测绘（分区不分户）预计 250000 平方米；1：500 地籍测绘预计 1500 亩）开展测绘服务，内容包括但不限于：对计划开展测绘区域进行无人机航飞出具正射影像、不低于 1：500 精度的地籍测绘、房产测绘、权属调查、名贵树木调查；根据要求出具相关测绘报告。', 24, '2023-04-26', 24, '2023-04-26', 24, 23, 24, NULL);
INSERT INTO `cmc_tender` VALUES (23, '沙湾区集体土地所有权确权登记成果更新汇交工作', '乐山市沙湾区自然资源局', '吴帅', '15298041282', '乐山市沙湾区公共资源交易服务中心（乐山市沙湾区政府采购管理中心）', '余女士、徐女士', '0833-3447892', '四川政府采购网（网上投标）', 105, 25, 950000.00, NULL, NULL, '2023-05-05', NULL, NULL, NULL, NULL, 25, '2023-05-04', 57, '2023-04-01', 25, NULL, 25, NULL);
INSERT INTO `cmc_tender` VALUES (24, '大渡河公司大岗山水电站大坝及库岸边坡监测设备设施完善工程公开招标', '国能大渡河大岗山发电有限公司', '曾露', '028-86896646', '国家能源集团国际工程咨询有限公司', '王刚', '028-65098696', ' 国家能源招标网', 105, 7, 8660000.00, NULL, 120000.00, '2023-05-08', '2023-04-14', 'http://www.chnenergybidding.com.cn/bidweb/', NULL, NULL, 26, '2023-05-07', 57, '2023-05-07', 26, 7, 26, NULL);
INSERT INTO `cmc_tender` VALUES (25, '彭州市国土变更调查监理项目（2022年）', '彭州市规划和自然资源局', '李老师', '02860432416', '四川远丰工程管理有限公司', '陈女士 ', '028-86666253', '成都市青羊区日月大道一段1501号1栋15层1505号', 105, 26, 200000.00, NULL, NULL, '2023-05-08', NULL, NULL, NULL, NULL, 25, '2023-05-05', 57, '2023-05-05', 25, 23, 25, NULL);
INSERT INTO `cmc_tender` VALUES (26, '广西LNG外输管道复线（北海LNG-贵港）线路LIDAR航测', '中国石油工程建设有限公司西南分公司', '黄旭', '028-82978314', '中国石油工程建设有限公司西南分公司', '黄旭', '028-82978314', '电子标', 105, 24, 0.00, NULL, NULL, '2023-05-09', '2023-04-22', '中国石油电子招标平台', NULL, '工作量：广西LNG外输管道复线（北海LNG-贵港）线路，线路经过\n北海市、钦州市、南宁市和贵港市，航测总长度约244km。\n工作内容：（1）空域申请；（2）机载LiDAR和航空摄影数据获取；（3）据预处理；（4）点云成果及DEM制作；（5）DOM成果制作；（6）\n调绘及补测；（7）DLG制作及入库。', 24, '2023-05-08', 57, '2023-05-08', 24, 23, 24, NULL);
INSERT INTO `cmc_tender` VALUES (27, '2022年度全国国土变更调查成果国家级核查监理及日常变更调查成果核查', '中国国土勘测规划院', NULL, NULL, '新华招标有限公司', NULL, NULL, '北京市海淀区莲花池东路39号西金大厦11层新华招标', 105, NULL, 3580000.00, NULL, 54000.00, '2023-05-11', NULL, 'http://www.ccgp.gov.cn', NULL, '一是依据2022年度变更调查遥感监测成果和地方举证照片及相关资料，对核查单位提交的内、外业核查成果进行监理检查；二是对调查成果中城镇村属性变化图斑、建设用地和耕地管理信息范围内图斑、林区耕地和林区园地图斑等图斑开展核查工作；三是对地方提交的整改成果开展复核成果核查；四是对仍有疑似错误的图斑，开展“互联网+”在线核查；五是对各地上报的2023年日常变更调查成果进行核查；六是根据工作安排，开展数据叠加处理、核查数据制作、数据统计分析等核查相关工作。', 23, '2023-05-11', 23, '2023-05-11', 23, 24, 23, NULL);
INSERT INTO `cmc_tender` VALUES (28, '盐源县测量标志普查维护', '盐源县自然资源局', '廖老师', '15984999913', '中达中正招标代理成都有限公司', '李女士', '15881004206', '西昌市长安南路海河桥金都背后停车场2楼开标中心', 105, 24, 900000.00, NULL, NULL, '2023-05-25', '2023-05-19', 'http://www.ccgp-sichuan.gov.cn/', NULL, '（一）测量标志普查，（二）测量标志维护，（三）测量标志委托保管，（四）汇总普查维护资料档案。', 24, '2023-05-23', 57, '2023-05-23', 24, 23, 24, NULL);
INSERT INTO `cmc_tender` VALUES (29, '2023-2026年度工程测绘项目技术配合服务框架协议1', '中国电力工程顾问集团西北电力设计院有限公司', NULL, NULL, NULL, NULL, NULL, '中国能建网站', 105, 23, 0.00, NULL, NULL, '2023-05-26', NULL, NULL, NULL, NULL, 23, '2023-05-26', 57, '2023-05-26', 23, 24, 23, NULL);
INSERT INTO `cmc_tender` VALUES (30, '雅砻江两河口混合式抽水蓄能电站、牙根一级水电站测量中心技术服务', '雅砻江流域水电开发有限公司', '唐浩', '028-82907949', '中投咨询有限公司', '文竹', '13709050196', '国投集团电子采购平台', 105, 7, 0.00, NULL, 100000.00, '2023-06-08', '2023-05-22', 'https://www.sdicc.com.cn', NULL, '本次招标的雅砻江两河口混合式抽水蓄能电站、牙根一级水电站测量中心技术服务项目所涉及的范围主要包括：两河口混合式抽水蓄能电站、牙根一级水电站工程从筹建项目、准备项目、主体 工程项目等工程涉及到的地形测量，工程建设实施阶段测量管理，电站施工测量控制网的建设、维 护及管理，零星测量工作等。', 23, '2023-06-08', 57, '2023-06-08', 23, 7, 23, NULL);
INSERT INTO `cmc_tender` VALUES (31, '三圣街道办事处环城生态公园范围及部分征地范围建（构）筑物测绘服务', '成都市锦江区人民政府三圣街道办事处 ', NULL, '028-84675036', '成都新高建设经济技术咨询有限公司', NULL, '028-85142819', '成都市高新区天益街 38 号 2 栋 5 楼', 105, NULL, 0.00, NULL, NULL, '2023-06-20', NULL, NULL, NULL, '项目概况：对现有企业（商家）及农户约 300 余户，按户对其建（构）筑物进行测 绘并出具测绘报告，内容包括但不限于：每户航拍正射影像图、房产面积测绘、宗地面积、 硬化地表、绿化面积、树木数量、测算等，根据测绘内容出具测绘报告资料。\n工作范围：三圣街道辖区内。\n服务期限：合同签订后 30 个工作日内', 23, '2023-06-20', NULL, '2023-06-20', NULL, 23, NULL, NULL);
INSERT INTO `cmc_tender` VALUES (32, '苍溪抽水蓄能电站规划阶段地形图测绘项目', '苍溪县发展和改革局', '徐先生 ', '13981267988', '成都市算友建筑工程技术咨询有限公司', '王女士   ', '0839-5667999', ' 广元市苍溪县陵江镇杜里坝荟今味2楼', 105, 27, 121400.00, NULL, NULL, '2023-06-20', '2023-06-14', NULL, NULL, '编制苍溪抽水蓄能电站测绘报告，为拟建苍溪抽水蓄能电站的稳定性和适宜性评价提供地质测绘技术服务及技术成果资料。', 27, '2023-06-16', 46, '2023-06-16', 27, 23, 27, NULL);
INSERT INTO `cmc_tender` VALUES (33, '普格县集体土地所有权登记成果更新汇交项目', '普格县自然资源局', '伍老师', '0834-4776946', '凉山共创招标代理有限公司', '唐女士', '0834-3630712', '西昌市胜利路 123 号凉山共创招标代理有限公司', 105, 25, 1500000.00, NULL, NULL, '2023-07-11', '2023-07-06', NULL, NULL, '为依法维护农民土地权益，支撑集体经营性建设用地入市等自然资源改革工作，按照自然资源部、四川省自然资源厅工作部署及州自然资源局的工作安排，在 2023 年 10 月底前根据《不动产登记数据库标准》《集体土地所有权确权登记成果汇交指南》等技 术规范要求，将现有集体土地所有权确权登记成果，纳入不动产登记数据库，并完成数 据更新；2023 年 12 月底前完成登记成果质量检查验收，完成省级成果汇交；2023 年底 前将成果统一离线汇交至自然资源部。', 23, NULL, 57, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_tender` VALUES (34, '四川泸天化股份有限公司厂区消防水系统改造项目之地下管网探测项目', '四川泸天化股份有限公司', '张先生', '0830-4122187', '四川省富盛工程项目管理有限公司', '邓先生', '028-84352226', '泸州市江阳区酒城大道一段2号市政务服务中心五楼', 105, 24, 1800000.00, NULL, 36000.00, '2023-07-19', '2023-07-19', 'https://www.lzsggzy.com', NULL, '1、地形图面积约 3000000 平方米（最终以实测面积为准）；2、总的地下管网探测长度约 200 公里（最终以实测长度为准）。', 24, '2023-07-14', 24, '2023-07-14', 24, 23, 24, NULL);
INSERT INTO `cmc_tender` VALUES (35, '桂冠电力2023-2024年度新能源项目用地预审、规划选址及用地报批框架采购', '广西桂冠电力股份有限公司', NULL, NULL, '中国水利电力物资华南有限公司', '彭国强', '0771-6118364', '线上开标', 105, 24, 0.00, NULL, 19029.00, '2023-08-14', '2023-08-07', 'http://www.cdt-ec.com', NULL, '桂冠电力所属各单位2023-2024年度建设的光伏、风电项目用地预审、规划选址及用地报批服务，本次招标范围包括但不限于：\n（1）建设项目用地预审与选址意见书、项目符合国土空间规划材料编制与报批。\n（2）永久用地勘测定界工作。\n（3）建设项目用地材料编制与报批（含征地社会稳定性分析报告）。', 24, '2023-08-12', 57, '2023-08-12', 24, 23, 24, NULL);
INSERT INTO `cmc_tender` VALUES (36, '甬绍干线东段天然气管道工程线路测量外协', '中国石油工程建设有限公司西南分公司', '李洋春', '028-82978981', NULL, NULL, NULL, '线上开标', 105, 24, 0.00, NULL, NULL, '2023-09-13', '2023-09-05', NULL, NULL, '油气管道LIDAR航测的内业及外业工作，\n主要工作量包括：118.3km带宽1kmLIDAR航测，78km带宽0.4kmDLG制作。\n主要工作内容包括：空域申请及审批，像片控制点测量，机载LiDAR航摄，DOM及点云处理，调绘及补测，DLG编绘，DOM、DEM、DLG成果制作，测量技术总结编制，审查后的DOM、DEM、DLG成果修改及入库，测量成果存档等。所有测绘成果满足现行规范要求，详见“第三章 技术要求”', 24, '2023-09-11', 57, '2023-09-11', 24, 23, 24, NULL);
INSERT INTO `cmc_tender` VALUES (37, '华能澜沧江公司TB水电站库区无人机航拍正摄影像图制作及水库地形测里项目', '华能澜沧江水电股份有限公司', '杨先生', '0877-3060685', '中国华能集团有限公司北京招标分公司', '翟先生', '400-010-1086转8302', '线上开标', 105, 24, 0.00, NULL, 15000.00, '2023-09-25', '2023-09-18', 'https://ec.chng.com.cn', NULL, '（1）TB水电站库区无人机航拍正摄影像图制作；（2）TB水电站水库地形测量；（3）TB水电站施工区实景三维模型。', 24, '2023-09-23', 57, '2023-09-22', 24, 23, 24, NULL);
INSERT INTO `cmc_tender` VALUES (38, '青海公司玛尔挡水电站库区水温观测服务公开招标', '国能青海黄河玛尔挡水电开发有限公司', '李轩', '14797769567', '国家能源集团国际工程咨询有限公司', '闫磊', '0951-6970520', '线上开标', 105, 24, 0.00, NULL, 80000.00, '2023-10-24', '2023-10-09', 'https://www.ceic.com', NULL, '按照相关法律法规、技术规范、环境影响评价报告等技术文件要求，负责承担黄河玛尔挡水电站蓄水期和运行期库区各断面的水温观测相关工作，必要时按照委托人要求开展应急监测工作，服务并接受玛尔挡水电站环保管理中心的管理；配合委托人和国家相关主管部门进行生态环境保护检查，配合委托人完成库区水温观测相关验收工作，开展水环境保护方面的宣传教育工作。', 24, '2023-10-23', 57, '2023-10-23', 24, 23, 24, NULL);

-- ----------------------------
-- 33、cmc合同评审表
-- ----------------------------
drop table if exists `cmc_contract`;
create table `cmc_contract`  (
  `contract_id` 			char(19)  		not null 	 comment '合同id',
  `contract_code` 			varchar(16) unique default null comment '合同编码（ht2024w002）',
  `contract_number` 		varchar(30)  	default null comment '合同编号',
  `contract_name` 			varchar(100)  	default null comment '合同名称',
  `tender_id` 				int  			default null comment '投标项目id',
  `party_a_id` 				varchar(50)  	default null comment '甲方单位id',
  `amount` 					decimal(10, 2) 	default null comment '合同金额',
  `deposit` 				decimal(10, 2) 	default null comment '履约保证金',
  `contract_document` 		varchar(255)  	default null comment '合同文件',
  `drafter` 				bigint			default null comment '拟稿人',
  `draft_time` 				date			default null comment '拟稿日期',
  `remark` 					text  			default null comment '合同备注',
  `sign_date` 				date			default null comment '签订日期',
  `sign_remark` 			varchar(255)  	default null comment '签订备注',
  `sign_scan` 				varchar(255)  	default null comment '签订扫描件',
  `comment_type` 			char(1)  		default null comment '评审方式',
  `manager_comment` 		varchar(255)  	default null comment '分管审批意见',
  `manager_user_id` 		bigint 			default null comment '分管审批人',
  `manager_time` 			date			default null comment '分管审批日期',
  `gm_comment` 				varchar(255)  	default null comment '总经理审批意见',
  `gm_user_id` 				bigint 			default null comment '总经理审批人',
  `gm_time` 				date			default null comment '总经理审批日期',
  primary key (`contract_id`)
) engine = innodb comment = 'cmc合同评审表';

-- ----------------------------
-- 初始化-合同评审表数据
-- ----------------------------
INSERT INTO `cmc_contract` VALUES ('1648881410101329320', 'CMC2：G-24002', NULL, '富源至罗平高速公路勘察设计施工图定测项目技术服务合同', NULL, '0214', 969800.00, NULL, NULL, 22, '2024-03-01', '本合同为包干总价合同，含税总费用969800.00元，税率6%，不含税总价为：914905.66元，如由于国家税收政策调整，导致增值税适用税率发生变化的，以本合同约定的不含税价为准，按照纳税义务发生时点所适用的税率计算增值税税款，同时调整价税合计款。\n上述费用包含人工、设备、机械、材料、临时设施、措施、管理、利润、税金等所有费用。', NULL, NULL, NULL, '2', '已核', 7, '2024-03-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410103478283', 'CMC2：A-23016', NULL, '测绘项目年度日常外协合同（2023年7月1日至2024年6月30日）', NULL, '0275', 0.00, NULL, NULL, 22, '2023-06-27', NULL, NULL, NULL, NULL, '2', '已核', 7, '2023-06-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410107254972', 'CMC2：A-23003', 'N5105212022000271', '泸县2022年度国土变更调查及日常变更工作政府采购合同', NULL, '0111', 4560000.00, NULL, NULL, 22, '2023-02-01', '合同金额：中标金额人民币456.00万元(大写：人民币肆佰伍拾陆万元整)。\n本合同为单价合同，单价约定如下：\n（1）日常变更调查：内业工作量以下发图斑量计算，单价110元/个；外业工作量以实际开展举证的图斑量计算，单价120元/个；同时开展了内外业工作的图斑按230元/个计算。\n（2）恢复耕地专项调查：内业工作量以举证图斑总量计算，单价110元/个；外业工作量以实际开展举证的图斑量计算，单价120元/个。同时开展了内外业工作的图斑按230元/个计算。\n（3）年度变更调查：内业工作量以举证图斑总量计算，单价80元/个；外业工作量以实际开展举证的图斑量计算，单价80元/个；同时开展了内外业工作的图斑按160元/个计算。\n根据以上方式进行结算，当结算金额超过中标金额时，按中标金额支付。当结算金额低于中标金额时，按实支付。', NULL, NULL, NULL, '2', '已核', 7, '2023-02-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410107603516', 'CMC1：A-23043', NULL, 'JW梯级电站建设征地实物指标土地调查测量技术服务合同', NULL, '0227', 4100000.00, NULL, NULL, 22, '2023-06-30', '本合同不含税价格为人民币3867924.53元（大写：叁佰捌拾陆万柒仟玖佰贰拾肆元伍角叁分），适用增值税税率6%，税费为人民币232075.47元（大写：贰拾叁万贰仟零柒拾伍元肆角柒分），故本合同含税总价为人民币 4100000.00 元（大写：肆佰壹拾万元整）。本合同不含税总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2023-07-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410113168220', 'CMC2：A-23028', 'C.WW.2023-095', '重庆市江津区团结湖大数据智能产业园PPP项目第三方监控量测一标段合同', NULL, '0275', 2379700.00, NULL, NULL, 22, '2023-11-08', '经甲乙双方协商同意，重庆市江津区团结湖大数据智能 产业园 PPP 项目第三方监控量测一标段包干价人民币2379700 元(大写：人民币贰佰叁拾柒万玖仟柒佰圆整)。', NULL, NULL, NULL, '2', '已核', 7, '2023-11-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410114745619', 'CMC2：A-23018', NULL, '苍溪抽水蓄能电站规划阶段地形图测绘技术服务协议', NULL, '0008', 119000.00, NULL, NULL, 22, '2023-06-27', '经甲乙双方协商一致，本协议为单价合同，工作完成后按最终工作量据实结算，增值税税率为6%。本协议已包括乙方提供本协议范围内所有技术服务所需的全部费用（包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）。', NULL, NULL, NULL, '2', '已核', 7, '2023-06-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410115357569', 'HT2020W034', '2100002020030302ZZ00228', '南网数研院航飞影像服务建设项目粤北（河源、韶关、清远、肇庆）标包合同', NULL, '0119', 1925000.00, NULL, NULL, 22, '2020-07-17', '甲方向乙方支付的技术服务报酬总额为：人民币壹佰玖拾贰万伍仟圆元（大写），￥1925000.00（小写），其中包含增值税额：人民币壹拾万捌仟玖佰陆拾贰元贰角陆分（大写），￥108962.26（小写）(最终含税价按照增值税纳税义务发生时国家执行的税率计算)。', '2020-09-01', NULL, NULL, '2', '同意办理', 7, '2020-07-21', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410116992716', 'HT2022W033', '81-ZB1012-202-2022', '中电工程安徽贵池区（秋江）100MW渔光互补光伏电站项目勘测合同', NULL, '0243', 383000.00, NULL, NULL, 22, '2022-12-26', '经双方商定，本合同工程勘测费用共计大写人民币叁拾捌万叁仟元整（小写：￥383,000元整）。税率为6%，其中不含税合同额为￥ 361320.75 元，税额为小写：￥ 21679.25 元。上述金额包括乙方为完成本合同工作的全部款项。', NULL, NULL, NULL, '2', '已核', 7, '2022-12-30', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410118132314', 'HT2020W055', 'LZZFCGGZ（2020）5001', '（泸县）“房地一体”宅基地使用权、集体建用地使用权及房屋所有权不动产登记项目第七包', NULL, '0111', 9827200.00, NULL, NULL, 22, '2020-08-05', '合同总价为人民币大写： 玖佰捌拾贰万柒仟贰佰 元，即RMB￥ 9827200 元；该合同总价已包括测绘服务、检测等等所有其他有关各项的含税费用。最终结算是按中标单价（296元/户）乘以实际完成户数（一户多宅算一户）按实结算；“四镇八村”中已实施测绘的户数，以150元/户结算；已颁发《集体建设用地使用权》和《房屋所有权证》的宗地户数，不需测绘直接换证的以40元/户结算。\n合同工期：\n（一）2020年9月底前“房地一体”宅基地使用权、集体建设用地使用权及房屋所有权不动产登记项目包颁证率达到90%；\n（二）2020年12月底以前完成全部工作内容。', '2020-08-13', NULL, NULL, '2', NULL, 7, '2020-08-07', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410118749805', 'HT2020W056', 'XXY-CH-2020-023', '南欧江七级水电站库区地形测量数据采集外委项目技术服务协议书', NULL, '0241', 1154500.00, NULL, NULL, 22, '2020-06-22', '本合同为固定单价合同，合同总价暂定为人民币1154500.00元（大写：壹佰壹拾伍万肆仟伍佰元整）。最终费用以经审核后的实际工作量为准，按计费标准所列单价进行费用结算（飞行费用按实际发生计算）。', '2020-07-01', NULL, NULL, '2', NULL, 7, '2020-06-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410121267356', 'HT2022W018', NULL, '石棉县孟获城景区规划用地202226号、202227号宗地1:500地形图测绘技术服务项目技术服务合同', NULL, '0157', 37000.00, NULL, NULL, 22, '2022-03-25', '本合同为总价合同。费用合计为：37000.00元（大写：叁万柒仟元整）。\n以上价格为含税包干总价，包括但不限于按甲方要求完成本项目服务内容并提供甲方要求的相应资料文件所产生的设备设施使用费、人工费、人员差旅费、税金、利润、管理费等一切相关的全部费用。', '2022-03-30', NULL, NULL, '2', '已核', 7, '2022-03-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410124643515', 'HT2020W019', NULL, '巴南区一品街道金田村环山公路1：500地形图测绘合同', NULL, '0271', 34430.00, NULL, NULL, 22, '2020-11-02', '测绘单价：&yen;22元/亩 ，按预计工作量1565亩计算的预计工程总费用为&yen;34430元(大写:叁万肆仟肆佰叁拾元整)，最终结算金额按实际测绘成果工作量据实结算。', '2020-11-16', NULL, NULL, '2', NULL, 7, '2020-11-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410125372801', 'CMC2：G-21038', '基础公司-天府大道北延线（成都段）-2021005号', '天府大道北延线（成都段）项目新都区范围内基本农田补划方案编制、听证及评估论证技术服务合同', NULL, '0013', 92500.00, NULL, NULL, 22, '2021-09-06', '4.1咨询服务费总额为包干价（含6%增值税）人民币：92500元（大写：玖万贰仟伍佰元整）。\n上述费用应包含相关方案的编制、评估、论证及评审、批复（或审查）所产生的全部费用，包括实施和完成基本农田补划方案编制、听证、审查验收的劳务、咨询、设备、服务、管理、安全、保险、税费、利润等所有从工作开始至结東的所有工作量和提供全套文件（包括纸质文档、电子文档及全部基础资料）以及后续服务等相关服务的全部费用。', '2021-09-09', NULL, NULL, '2', NULL, 7, '2021-09-08', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410125467945', 'HT2021W035', NULL, '彭州市1：500系列数字测绘产品生产服务项目（第4包）合同', NULL, '0124', 4660000.00, NULL, NULL, 22, '2021-08-25', '5.1 合同价款\n（1）项目按实际工作量进行单价结算，实际工作量为入库合格后的工作量。合同暂定总价为本包件的预算金额￥ 4660000.00 元（大写： 肆佰陆拾陆万元整 ），如合同结算总金额不超过本包件的预算金额，按实际工作量进行结算；如合同结算总金额超出本包件的预算金额，则按照预算金额结算。\n（2）本合同执行包干固定单价，该单价包括但不限于人工费、工本费、探测费、乙方工作人员交通食宿费、税费、利润及乙方为履行本合同支出的其他所有费用。除本合同另有明确约定之外，甲方不再就本合同向乙方另行支付其他任何费用。', '2021-08-27', NULL, NULL, '2', NULL, 7, '2021-08-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410126142724', 'HT2020W059', NULL, '2020年西华段铁路沿线环境品质提升工程测绘项目测量合同', NULL, '0024', 0.00, NULL, NULL, 22, '2020-09-21', '本合同为单价合同，价款计价方式：\n（1）以单价下浮率下浮23%后为：1.85元/平方米结算。\n（2）按测绘成果实际工程量*中标固定单价=最终合同总价，且合同结算金额不超过区发改局概算批复金额。', '2020-09-30', NULL, NULL, '2', NULL, 7, '2020-09-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410130524643', 'HT2020C018', NULL, '当雄项目测量技术服务合同', NULL, '0237', 705200.00, NULL, NULL, 22, '2020-10-28', '本工程以双方签订的《当雄项目测量技术服务合同》为依据，采用总价承包模式。本合同总价为：￥705,200.00元（大写：人民币柒拾万伍仟贰佰元整），本合同约定总价格为不含税价格+增值税，不含税价格为665,283.02元，增值税税率为6%，增值税税额为39,916.98元，不含税价格不因国家税率变化而变化，若在合同履行期间，遇国家税率调整，则增值税相应调整，从而价税合计相应调整，以开具发票的时间为准；包括乙方提供本合同范围内所有硬件、软件所需的全部费用。', '2020-11-02', NULL, NULL, '2', NULL, 7, '2020-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410131517581', 'HT2022W002', '510112202100345', '龙泉驿区1:500系列数字测绘产品生产与更新项目（第二包）监理服务合同', NULL, '0028', 896256.00, NULL, NULL, 22, '2022-01-10', '本合同总价为：89.6256万元（大写：捌拾玖万陆仟贰佰伍拾陆元整）。\n支付每笔款项前，中标人须按项目进度及要求提交付款申请，并出具等额的发票。以上付款比例可结合当年度财政预算和中标金额做适当调整。\n七、履约保证金\n乙方应在合同签订后15个工作日内缴纳人民币44812.8元（肆万肆仟捌佰壹拾贰元捌角，即合同总金额的5%）作为本合同的履约保证金。（交款方式：可以以支票、汇票、本票、或者金融机构出具的保函等非现金形式提交至甲方（包括网银转账，电汇等方式））。\n乙方全部成果经验收合格后30个工作日内，甲方无息退还乙方履约保证金。', '2022-01-20', NULL, NULL, '2', NULL, 7, '2022-01-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410134677458', 'HT2020C019', 'NZK426-20-02', '岷江流域820泥石流灾害抢险及修复设计（下庄-草坡）测绘技术服务合同', NULL, '0231', 86800.00, NULL, NULL, 22, '2020-10-29', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币86800.00   元（大写：捌万陆仟捌佰元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。除本合同另有约定外，此合同总价承包不予调整。', '2020-11-02', NULL, NULL, '2', NULL, 7, '2020-11-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410136522882', 'CMC2：A-24005', NULL, '资阳市幸福西路剩余道路建设项目排水管网项目内窥检测技术外协合同', NULL, '0183', 26000.00, NULL, NULL, 22, '2024-03-22', '本合同为单价合同，单价为13元/m，预估工作量为2000米，暂定合同总价为26000元。最终以实际完成工作量结算。', NULL, NULL, NULL, '2', '已核', 7, '2024-03-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410136853450', 'HT2020W040', NULL, '稻城县文化旅游资源普查及全域旅游总体规划编制项目采购项目合同', NULL, '0043', 500000.00, NULL, NULL, 22, '2020-06-10', '1、主合同为双乙方合同，乙方一为四川旅游规划设计研究院，乙方二为四川中水成勘院测绘工程有限责任公司。甲方应支付项目款为人民币169万元，指定四川旅游规划设计研究院为该项目唯一收款单位。\n2、我公司与四川旅游规划设计研究院签订了一份《联合体协议书》补充协议，约定我公司的服务费用为50万元整。', '2020-06-18', NULL, NULL, '2', NULL, 7, '2020-06-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410137848937', 'CMC2：A-23013', 'N5134232023000056', '盐源县测量标志普查维护政府采购合同', NULL, '0203', 896000.00, NULL, NULL, 22, '2023-06-05', '本合同执行期间合同总价不变，甲方无须另向乙方支付本合同规定之外的其他任何费用。本合同总价为人民币大写：捌拾玖万陆仟元整，小写：896000.00元。', NULL, NULL, NULL, '2', '已核', 7, '2023-06-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410141181829', 'CMC2：K-23001', '81-ZB1011-201-2022', '国投玛纳斯10万千瓦40万千瓦时储能配套40万千万光伏市场化并网发电项目岩土工程勘察合同', NULL, '0243', 270000.00, NULL, NULL, 22, '2023-03-21', '经双方商定，本合同岩土工程勘察费用共计大写人民币贰拾柒万元整（小写：￥270,000元整）。税率为6%，其中不含税合同额为￥ 254716.98 元，税额为小写：￥ 15283.02 元。上述金额包括乙方为完成本合同工作的全部款项。', NULL, NULL, NULL, '2', '已核', 7, '2023-03-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410144669780', 'HT2020W029', '20200624001', '南海樵山文化中心（东座）联合测绘合同', NULL, '0051', 246172.51, NULL, NULL, 22, '2020-08-03', NULL, '2020-08-07', NULL, NULL, '2', NULL, 7, '2020-08-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410160490777', 'HT2020C014', NULL, '芦山县龙门、宝胜、大川（场镇、皂角湾段）等乡镇防洪堤恢复提升工程测量技术服务工作合同', NULL, '0227', 150000.00, NULL, NULL, 22, '2020-07-01', NULL, '2020-07-13', NULL, NULL, '2', NULL, 7, '2020-07-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410162208644', 'CMC1：A-23037', 'NZK21301-2023-CH02', '道孚抽水蓄能电站可研阶段补充测绘技术服务合同（合同编号：NZK21301-2023-CH02）', NULL, '0231', 461749.78, NULL, NULL, 22, '2023-05-24', '本合同为总价承包计价方式，合同总金额为人民币￥461749.78元（大写：人民币肆拾陆万壹仟柒佰肆拾玖元柒角捌分），其中：不含税价款为人民币435613.00元（大写：人民币肆拾叁万伍仟陆佰壹拾叁元整），适用增值税税率6 %，税费为人民币26136.78元（大写：人民币贰万陆仟壹佰叁拾陆元柒角捌分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-05-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410162868926', 'HT2021W037', 'JF2020(NH)WZ0066', '（佛山市）区重点基础设施项目征地拆迁测绘服务采购合同', NULL, '0062', 0.00, NULL, NULL, 22, '2021-08-11', '三、服务资格期限（项目完成期限）\n本项目服务资格期限共三年，其中：\n第一年：2020年8月17日至2021年8月16日；\n第二年：2021年8月17日至2022年8月16日；\n第三年：2022年8月17日至2023年8月16日。\n采购合同书须每年签订一次，本合同期为第二年，服务期限为2021年8月17日至2022年8月16日。\n（五）服务收费标准\n按国家测绘局《国测财字〔2002〕3号文》规定的收费标准收费。单宗测绘服务费用按上述收费标准不足500元的，按500元/宗收费。', '2021-09-10', NULL, NULL, '2', NULL, 7, '2021-09-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410163021188', 'CMC2：A-22025', NULL, '2022年西安路街道新二村24栋等20个老旧小区及配套设施改造工程项目工程测绘技术服务合同', NULL, '0023', 99500.00, NULL, NULL, 22, '2022-10-10', '合同总价格按区发改局概算批复下浮0.5%（大写：百分之零点五）计算。\n以上价格为含税包干总价，包括但不限于按甲方要求完成本项目服务内容并提供甲方要求的相应资料文件所产生的设备设施使用费、人工费、人员差旅费、税金、利润、管理费等一切相关的全部费用。', NULL, NULL, NULL, '0', '同意', 7, '2022-12-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410164555946', 'HT2020W017', NULL, '两江新区市政消火栓普查测绘成图项目合同', NULL, '0268', 226000.00, NULL, NULL, 22, '2020-06-29', NULL, '2020-08-03', NULL, NULL, '2', NULL, 7, '2019-07-01', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410178734144', 'HT2020C005', NULL, '惠州市金山新城水环境综合整治项目（水质改善和水利部分）测量及技术服务合同', NULL, '0226', 0.00, NULL, NULL, 22, '2020-05-25', '本合同的费用以业主方审核确认的勘察实际工作量计算的勘察费为计费依据。', '2020-07-20', NULL, NULL, '2', NULL, 7, '2020-06-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410183642225', 'HT2020W050', NULL, '西藏日喀则市聂拉木、定日风电场工程地形图测绘技术服务合同', NULL, '0238', 200000.00, NULL, NULL, 22, '2020-09-07', '本合同采用总价合同的承包方式，总价为20万元。', '2020-09-11', NULL, NULL, '2', NULL, 7, '2020-09-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410189150812', 'HT2020W018', 'XXY-CH-2020-023', '南欧江七级水电站库区地形测量数据采集外委项目技术服务协议书', NULL, '0241', 1154500.00, NULL, NULL, 22, '2020-07-13', '本合同为固定单价合同，合同总价暂定为人民币1154500.00元（大写：壹佰壹拾伍万肆仟伍佰元整）。最终费用以经审核后的实际工作量为准，按计费标准所列单价进行费用结算（飞行费用按实际发生计算）。', '2020-07-15', NULL, NULL, '2', NULL, 7, '2020-07-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410191852464', 'HT2022W016', 'YLDC-DBA-ZZ2022154', '基于已知系统的运行期大坝水平位移监测控制网稳定性评判方法研究合同', NULL, '0200', 479967.66, NULL, NULL, 22, '2022-03-09', '7.1合同总价\n（1）本合同总价款为人民币&yen;479967.65元（大写：肆拾柒万玖仟玖佰陆拾柒元陆角伍分），包干使用。费用组成详见《合同价格表》。\n（2）上述合同价格均包含乙方按照合同规定完成相关研究工作和提交合格研究成果所需的全部费用，包括直接成本、间接成本、管理费、利润、税金以及应承担的相应风险费用。\n（3）乙方应按有关法律、法规的规定纳税。除合同另有规定外，乙方应纳的税金包括在合同价格中。', '2022-03-14', NULL, NULL, '2', NULL, 7, '2022-03-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410192970032', 'HT2020W007', 'NHXC2020-001', '（佛山市南海区不动产登记）宗地整理入库项目（委托）合同', NULL, '0060', 829880.00, NULL, NULL, 22, '2020-04-22', '合同费用总额（含税）为人民币：￥829880.00元整（大写：人民币捌拾贰万玖仟捌佰捌拾元整）。合同费用总额已包括乙方履行本合同义务所需的一切可预见费用，除此之外，乙方不得要求甲方另行支付其他费用。', '2020-04-28', NULL, NULL, '2', NULL, 7, '2020-04-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410200338104', 'HT2021W050', 'C.WW.2021-105', '江南新城片区排水管网补勘补测项目内窥检测劳务外协合同', NULL, '0275', 330000.00, NULL, NULL, 22, '2021-10-15', '经友好协商，内窥检测(CCTV)单价人民币大写： 壹万贰仟元/公里，人民币小写： 12000 元/公里；内窥检测(QV) 单价为人民币大写：  陆仟元/公里，人民币小写： 6000 元/公里；预估总工作量为 30 公里，其中内窥检测(CCTV) 25公里，内窥检测(QV) 5 公里，总费用预估人民币大写：叁拾叁万元整，人民币小写：330000.00元。最终按实际完成工作量结算（如委托方在对外结算时，QV无法结算费用，则该合同中的QV部分不计费）。', '2021-10-18', NULL, NULL, '2', NULL, 7, '2021-10-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410214518639', 'CMC2：G-23014', NULL, '（新能源在役风电场2023年度）沉降观测及水平度、垂直度检测技术服务合同', NULL, '0162', 409814.00, NULL, NULL, 22, '2023-12-01', '本项目服务费用总价为人民币（大写）肆拾万零玖仟捌佰壹拾肆元整（￥409814.00），税率6%（若乙方开票税率不足6%，差额部份直接在服务费总额中扣除）。', NULL, NULL, NULL, '2', '已核', 7, '2023-12-04', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410220262588', 'HT2020W066', '5101132020000465', '成都市青白江区拆迁和空闲地块监管技术外包服务采购项目政府采购合同', NULL, '0029', 651700.00, NULL, NULL, 22, '2020-11-02', '合同中标价为￥651700.00元（大写：人民币陆拾伍万壹仟柒佰元整）（含税价）。最终合同额根据实际测量面积按实结算。', '2020-11-06', NULL, NULL, '2', NULL, 7, '2020-11-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410222755173', 'CMC2：A-24002', NULL, '仪陇县立山镇商业广场房产测绘采购服务合同', NULL, NULL, 25300.00, NULL, NULL, 22, '2024-01-10', '本合同为单价合同，单价为2300/户，暂定合同金额为25300元。', NULL, NULL, NULL, '2', '已核', 7, '2024-01-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410225456144', 'HT2022W007', NULL, '凉山州自然资源局2021年度国土变更调查政府采购合同', NULL, '0104', 349000.00, NULL, NULL, 22, '2022-01-20', '项目服务费用根据工作进度结算支付，项目总金额为349000元（大写：人民币叁拾肆万玖仟元整）。', '2022-01-28', NULL, NULL, '2', NULL, 7, '2022-01-21', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410227794174', 'CMC2：G-23005', NULL, '三圣街道办事处拆迁航拍、测绘服务项目合同', NULL, '0026', 0.00, NULL, NULL, 22, '2023-05-11', '七、测绘服务报酬及支付方式\n1、合同单价：1:500地籍测绘单价按照测绘生产成本费用定额（财建[2009]17号）中界线测绘1:500城镇地籍测绘价格下浮 10 %。房产测绘单价按照测绘生产成本费用定额（财建[2009]17号）中1:500房产测绘价格下浮 10 %。航拍单价按照测绘生产成本费用定额（财建[2009]17号）中摄影测量与遥感1:500单片纠正价格下浮 8 %。', NULL, NULL, NULL, '2', '已核', 7, '2023-06-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410230989354', 'CMC2：G-23007', NULL, '三台县文峰库区、明台库区6处点位河道管理范围划定项目', NULL, '0146', 85000.00, NULL, NULL, 22, '2023-06-15', '参考三台县河道管理范围划定项目的单价，经协商，合同总价款：85000.00元（大写：捌万伍仟元整）。', NULL, NULL, NULL, '2', '已核', 7, '2023-07-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410233908946', 'CMC1：A-23087', 'NZK21254-2023-CH02（补充）', '盐源抽水蓄能电站预可阶段测绘技术服务合同补充协议', NULL, '0231', 250454.09, NULL, NULL, 22, '2023-11-24', '本补充协议暂定合同总价为人民币250454.09元（大写：贰拾伍万零肆佰伍拾肆元零玖分），其中：不含税价款为人民币236277.44元（大写：贰拾叁万陆仟贰佰柒拾柒元肆角肆分），适用增值税税率6%，税费为人民币14176.65元（大写：壹万肆仟壹佰柒拾陆元陆角伍分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-11-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410239584326', 'HT2020C010', 'A357KX-20-01', '西昌东河水库测绘技术服务合同（第一次测绘项目）', NULL, '0231', 33200.00, NULL, NULL, 22, '2020-06-10', '本合同采用总价承包模式，总价为33200元。', '2020-06-15', NULL, NULL, '2', NULL, 7, '2020-06-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410241016160', 'CMC2：G-22018', NULL, '四川省长葫灌区一张图建设项目技术服务合同', NULL, '0175', 250000.00, NULL, NULL, 22, '2022-06-27', '项目完成并提交数据成果后，经甲方验收合格后7个工作日内一次性支付全部款项，计250000.00元（大写：人民币贰拾伍万元整）。在付款前，乙方开具与本合同工程价款等额的增值税专用发票，否则，甲方可暂缓付款，不视为违约。', '2022-07-04', NULL, NULL, '2', NULL, 7, '2022-07-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410243411447', 'CMC2：A-23022', NULL, '监测项目年度日常外协合同（2023年7月1日至2024年6月30日）', NULL, '0275', 0.00, NULL, NULL, 22, '2023-08-01', '第三条  监测工程费及结算办法\n1.单价及费用在单项工程委托中明确；\n2.费用支付方式在单项工程委托中明确。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410247956787', 'CMC2：A-23027', NULL, '中国交建马来西亚东海岸铁路项目精测网复测工作测绘合同', NULL, '0191', 5182050.00, NULL, NULL, 22, '2023-10-27', '本合同暂定总价款：人民币【5,182,050.00】（大写：【伍佰壹拾捌万贰仟零伍拾元整】）。其中，不含增值税税额价款【/】，税率/征收率【/%】，增值税税额为【/】。本合同适用增值税税率为【/%】。若乙方出具的增值税发票税率＜【/%】，则税金差额部分由乙方承担，同时因此造成的甲方延迟支付、无法支付或支付金额与乙方开具的增值税专用发票金额不等，乙方须自行承担全部后果且不得进行索赔。', NULL, NULL, NULL, '2', '已核', 7, '2023-10-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410250539000', 'CMC2：G-22023', 'N5133112022000054', '甘孜藏族自治州水旱灾害风险普查（山丘区中小河流洪水淹没图编制）采购合同', NULL, '0068', 2294400.00, NULL, NULL, 22, '2022-08-12', '本项目为联合体服务合同，本项目服务费用为18,912,000.00元（大写：壹仟捌佰玖拾壹万贰仟元整），服务费为含税（税率为6%）价格。\n1、四川弘诚天毅工程咨询股份有限公司资金占比57.868%，费用为10944000.00元（大写：壹仟零玖拾肆万肆仟元整）。\n2、四川中水成勘院测绘工程有限责任公司资金占比12.132%，费用为2294400.00元（大写：贰佰贰拾玖万肆仟肆佰元整）。\n 3、四川田册科技有限公司资金资金占比30%，费用为5673600.00元（大写：伍佰陆拾柒万叁仟陆佰元整）。', NULL, NULL, NULL, '2', '同意', 7, '2022-08-19', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410250875590', 'HT2020W001', NULL, '白玉县纳塔乡奇日科温泉浴场测绘项目测绘合同', NULL, '0005', 50000.00, NULL, NULL, 22, '2019-10-08', NULL, '2019-10-10', NULL, NULL, '2', NULL, 7, '2019-10-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410251834900', 'CMC2：A-23015', NULL, '仪陇县多测合一采购服务合同（仪陇县永光镇人民政府公共租赁房建设项目和仪陇县永光镇政府综合办公楼建设项', NULL, '0209', 6336.94, NULL, NULL, 22, '2023-07-03', '本项目为单价合同，预估合同总价为6336.94元。', NULL, NULL, NULL, '2', '已核', 7, '2023-07-04', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410256492469', 'HT2021C014', NULL, '德阳市沱江上游（石亭江段）水环境治理项目可研阶段测量及技术服务合同', NULL, '0226', 163103.45, NULL, NULL, 22, '2021-04-01', '本合同计费率为39.2%，暂定不含税价￥153871.17元，暂定含税价是￥163103.44元（大写：人民币壹拾陆万叁仟壹佰零叁元肆角肆分）（增值税率为 6 %，安全费用2%；若合同实施过程因国家政策或业主单位因素导致增值税率改变，增值税则按国家相关政策执行），依据《工程勘察设计收费标准》（国家发展计划委员会、建设部，2002年版）实物工作量对应的测量费×计费率计算。最终费用以业主签收的工作量进行结算、并考虑绩效考核奖惩费用后计取。', '2021-04-07', NULL, NULL, '2', NULL, 7, '2021-04-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410262720843', 'HT2020W043', NULL, '西樵纺织产业基地太平三门开发建设项目厂房A1、厂房A2、厂房A3、厂房A4、宿舍A联合测绘合同', NULL, '0049', 208800.00, NULL, NULL, 22, '2020-09-14', '测绘工程费按项目报价函金额人民币贰拾万零捌仟捌佰元整（小写208800.00元），实际测绘项目类型和实际工作量必须符合佛山市自然资源局测绘成果质量检验合格并加盖章的测绘成果报告为准。', '2020-09-17', NULL, NULL, '2', NULL, 7, '2020-09-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410263993280', 'HT2021W029', NULL, '（佛山市）九江镇临港国际产业社区测量服务工程测量合同', NULL, '0050', 8200.00, NULL, NULL, 22, '2021-06-21', '收费标准： 200 元/宗，共41宗。预计总价款8200元。', '2021-06-25', NULL, NULL, '2', NULL, 7, '2021-06-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410270491484', 'HT2020W022', '20200624002', '南海樵山文化中心（西座）联合测绘合同', NULL, '0051', 330969.28, NULL, NULL, 22, '2020-08-03', NULL, '2020-07-20', NULL, NULL, '2', '同意办理', 7, '2020-08-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410270855494', 'HT2022W013', NULL, '南岭国家公园南水片区生态环境系统保护修复工程-乳源瑶族自治县城区废旧矿山环境修复治理工程竣工图编制及', NULL, '0142', 20000.00, NULL, NULL, 22, '2022-01-05', '根据韶关市网上中介服务超市平台中选通知书约定，合同总价为人民币贰万元整（小写：&yen;：20000.00元整）。', '2022-01-12', NULL, NULL, '2', NULL, 7, '2022-01-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410282549870', 'HT2020W068', '20200927', '九江镇南畔华光小学新教学楼扩建工程联合测绘合同', NULL, '0058', 31420.30, NULL, NULL, 22, '2020-09-01', '本项目为单价合同，所有测绘项目按“国测财字〔2002〕3号文”规定的收费标准测量计费。最终合同价格按照完成工作量及合同单价计费。', '2020-09-04', NULL, NULL, '2', NULL, 7, '2020-09-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410287503999', 'HT2021C021', NULL, '大渡河老鹰岩二级水电站可行性研究阶段测绘技术服务合同', NULL, '0231', 441400.00, NULL, NULL, 22, '2021-05-17', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币441400.00元（大写：肆拾肆万壹仟肆佰元整）。', '2021-05-21', NULL, NULL, '2', NULL, 7, '2021-05-19', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410289032772', 'HT2020W081', NULL, '石棉县田湾河河湖岸线保护与利用规划编制工作项目技术服务合同', NULL, '0156', 50000.00, NULL, NULL, 22, '2020-10-26', '第五条 服务经费及支付方式\n1.服务经费：本技术服务费实行总价包干，费用为人民币5万元（大写：伍万圆整）。\n2.支付方式：最终成果通过相关技术审查后一次性支付全部费用。', '2020-11-06', NULL, NULL, '2', NULL, 7, '2020-10-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410291107304', 'HT2021W022', NULL, '西藏拉萨工程治理体系建设 5 个子项目治理效果监测合同', NULL, '0194', 1159700.00, NULL, NULL, 22, '2021-06-25', '(一)本项目服务费用由以下组成：\n1.昌都市卡若区城关镇嘎东街不稳定斜坡治理工程效果监测费&yen;101200（大写：人民币壹拾万壹仟贰佰元）；\n2.昌都市类乌齐县吉多乡政府后山滑坡治理工程效果监测费&yen;559000（大写：人民币伍拾伍万玖仟元）；\n3.林芝市工布江达县错高乡罗池村曲杰荣泥石流治理工程效果监测费&yen;101500（大写：人民币壹拾万壹仟伍佰元）；\n4.林芝市朗县中学不稳定斜坡治理工程效果监测费&yen;183000（大写：人民币壹拾捌万叁仟元）；\n5.日喀则市定日县盆吉乡盆吉村盆吉沟泥石流治理工程效果监测&yen;215000（大写：人民币贰拾壹万伍仟元）。\n合同总价：￥1159700.00 元（人民币大写：壹佰壹拾伍万玖仟柒佰元整）；本合同执行期间合同总价不变，甲方无须另向乙方支付本合同规定之外的其他任何费用。\n\n第五条 履约保证金 \n1、乙方应于本合同签订前向甲方交纳合同金额的 5%作为本合同的履约保证金。履约保证金的形式为银行转账或银行出具的履约保函。\n2、乙方履约不合格的，履约保证金不予退还。\n3、乙方按约定服务期限，履约合格的，甲方无息退还履约保证金。', '2021-07-12', NULL, NULL, '2', NULL, 7, '2021-06-29', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410296639104', 'HT2021W020', NULL, '彭州市地下管线普查成果更新探测服务采购项目（第三包）合同', NULL, '0124', 1710000.00, NULL, NULL, 22, '2021-05-10', '6.1 合同价款\n（1）本合同最终以实际提交管线长度结算，实际提交管线长度为入库合格后的全野外探测、内外业结合核实探测管线长度，全野外探测单价为4000元/公里，内外业结合核实探测单价为3400元/公里。合同暂定总金额为本包件的中标金额171 万元，如合同结算总金额超出本包件的中标金额，则按照中标金额结算。\n（2）可直接利用的地下管线普查成果不计入管线长度进行结算。\n（3）本合同执行包干固定单价，该单价包括但不限于人工费、工本费、探测费、乙方工作人员交通食宿费、税费、利润及乙方为履行本合同支出的其他所有费用，除本合同另有明确约定之外，甲方不再就本合同向乙方另行支付其他任何费用。', '2021-05-17', NULL, NULL, '2', NULL, 7, '2021-05-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410297398475', 'CMC2：G-24005', NULL, '凯江三台县古井镇新妙、万安堤防段河道管理范围调整项目技术服务合同', NULL, '0146', 39000.00, NULL, NULL, 22, '2024-03-22', '参考三台县河道管理范围划定项目的单价，经协商，合同总价款：39000.00元（大写：叁万玖仟元整）。', NULL, NULL, NULL, '2', '已核', 7, '2024-03-26', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410299732520', 'CMC2：G-24004', NULL, '重庆高新区生态保护红线勘界定标外协合同', NULL, '0272', 398000.00, NULL, NULL, 22, '2024-03-01', '经甲乙双方协商同意，高新区生态保护红线勘界定标项目费用为包干价人民币 398000 元(大写：人民币 叁拾玖万捌仟圆整)。', NULL, NULL, NULL, '2', '已核', 7, '2024-04-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410303095423', 'HT2020W078', '04-金川-QTHT-20201130-003', '大渡河金川水电站库区G248（原S211）复建公路工程首级施工控制网建设技术服务合同', NULL, '0253', 193870.04, NULL, NULL, 22, '2020-04-10', NULL, '2020-04-22', NULL, NULL, '2', NULL, 7, '2020-04-14', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410309053516', 'HT2021C001', NULL, '2020年国网西藏直孔发电公司直孔电站库区右岸护坡修复加固项目地形地类图测绘技术服务合同', NULL, '0237', 30000.00, NULL, NULL, 22, '2021-01-12', NULL, '2021-01-15', NULL, NULL, '2', NULL, 7, '2021-01-14', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410312850944', 'CMC1：A-24007', NULL, '西藏那曲查龙抽水泵站测绘技术服务合同', NULL, '0231', 70448.45, NULL, NULL, 22, '2024-01-04', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥70448.45元（大写：人民币柒万零肆佰肆拾捌元肆角伍分），其中：不含税价款为人民币66460.80元（大写：人民币陆万陆仟肆佰陆拾元捌角），适用增值税税率6 %，税费为人民币3987.65元（大写：人民币叁仟玖佰捌拾柒元陆角伍分）。', NULL, NULL, NULL, '2', '已核', 7, '2024-01-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410319337004', 'HT2021W026', 'SGSCAB00JSJS2100334', '阿坝小金四姑娘山110kV输变电工程国土用地报件咨询服务技术服务合同', NULL, '0084', 148400.00, NULL, NULL, 22, '2021-05-25', '技术服务报酬总额为：人民币（大写）壹拾肆万捌仟肆佰元整（&yen;148400.00）（含税）。', '2021-06-02', NULL, NULL, '2', NULL, 7, '2021-05-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410330549313', 'HT2021C027', 'A186KX-21-03', '雅砻江牙根二级水电站预可研阶段测绘技术服务合同', NULL, '0231', 189800.00, NULL, NULL, 22, '2021-06-14', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币18.98万元（大写：壹拾捌万玖仟捌佰元整）。', '2021-06-21', NULL, NULL, '2', NULL, 7, '2021-06-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410331459017', 'CMC2：A-24006', NULL, '仪陇县2021年度耕地“进出平衡”流出耕地整改恢复技术服务项目合同', NULL, '0210', 13440.00, NULL, NULL, 22, '2024-03-13', '服务费：小写：&yen; 13440.00元（大写人民币：壹万叁仟肆佰肆拾元整）。\n服务费包含完成协作工作的全部费用[包含人工费，材料费，仪器机具使用费，管理费，利润，乙方及乙方所聘用人员规费（养老保险、医疗保险、失业保险、工伤保险、生育保险、住房公积金、人身意外伤害保险等），税金，环境保护，安全生产和成果保密费用等]。乙方必须按服务费组成及项目要求，合理安排使用服务费。乙方承诺投入安全生产的费用不低于项目总服务费的2%。', NULL, NULL, NULL, '2', '已核', 7, '2024-03-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410335448898', 'CMC2：A-19066', NULL, '石棉县流域面积1000km&sup2;以上河流河道管理范围划定服务采购项目（田湾河第二标段）技术服务合同', NULL, '0156', 655750.00, NULL, NULL, 22, '2019-10-08', '服务经费：本项目服务经费为人民币65.5750万元（大写：陆拾伍万伍仟柒佰伍拾元整）。该费用已包括实施项目服务所需的交通、技术审查、税金等一切费用，实行总价包干。本合同执行期间合同总价不变，甲方无须另向乙方支付本合同规定之外的其他任何费用。', NULL, NULL, NULL, '0', '已阅', 7, '2023-07-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410339742269', 'CMC2：G-23013', NULL, '佛山国家高新区东部现代物流产业集聚区南海片区基础设施建设项目（佛山国家高新区东部现代物流产业集聚区南', NULL, '0053', 119338.20, NULL, NULL, 22, '2023-10-24', '1．取费依据：国家测绘局二〇〇二年一月颁布的《测绘工程产品价格》、“国测财字〖2002〗3号文”规定的收费）（国家计委、建设部颁发）该标准为国家测绘局制定。\n2．取费项目及工程总价款：《南海区重点基础设施建设征地拆迁测绘服务采购项目合同》。\n3.按96折计费，共计119338.20元。', NULL, NULL, NULL, '2', '已核', 7, '2023-10-26', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410348435466', 'HT2021W041', NULL, '西林至广南高速公路基础控制测量及1:2000地形图测绘技术服务测绘合同', NULL, '0220', 221050.00, NULL, NULL, 22, '2021-09-27', '5.1  双方协商为合同总价（含增值税）为人民币大写：贰拾贰万零叁佰元整，计RMB￥220300.00元。\n备注\n1、最终报价含2%的生产安全费用。\n2、最终按实际工作量结算。\n3、增值税率为6%。 ', '2021-09-30', NULL, NULL, '2', NULL, 7, '2021-09-30', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410350550891', 'CMC2：A-24004', NULL, '大邑县农村乱占耕地建房问题整治技术服务政府采购合同', NULL, '0041', 2340000.00, NULL, NULL, 22, '2024-01-19', '本项目合同总金额为234.00万元（大写：贰佰叁拾肆万元整）。', NULL, NULL, NULL, '2', '同意', 7, '2024-01-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410354038149', 'CMC2：G-24001', NULL, '乳源北环路北侧土方回填项目（一期）—测绘复核服务测绘合同', NULL, '0150', 30600.00, NULL, NULL, 22, '2023-10-30', '1.取费依据：参照财建[2009]17号《测绘工程产品价格》双方拟定价格文件按每立方米0.3元计算，并根据乳源瑶族自治县人民政府办公室关于印发《乳源瑶族自治县政府投资项目前期工作经费管理办法》的通知（乳府[2022]106号）地形测绘费用按收费标准乘以0.6。\n2.测绘费用：本项目单价按0.18元/m&sup3;结算，预估测量方量170000m&sup3;；合同总费用暂定为&yen;30600.00元（大写：叁万零陆佰元整）（最终以实际完成工作量进行结算）。', NULL, NULL, NULL, '2', '已核', 7, '2023-10-31', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410354070864', 'HT2020C032', NULL, '木里河卡基娃水电站唐央县集镇外部供水工程地形地类图测绘技术服务合同', NULL, '0227', 77000.00, NULL, NULL, 22, '2020-12-01', '本合同价格采用总价包干模式。本合同价格为人民币7.26万元，适用增值税税率6%，税费为人民币0.44万元，本合同总价为人民币7.7万元（大写：柒万柒仟元整）。', '2020-12-10', NULL, NULL, '2', NULL, 7, '2020-12-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410357926147', 'HT2020W061', 'LDBZB采招〔2020〕ST056号', '三台县“十四五”水利发展和水利国土空间等3个规划编制技术服务合同', NULL, '0146', 10428600.00, NULL, NULL, 22, '2020-10-09', '本项目为联合体项目。\n四川中水成勘院测绘工程有限责任公司（联合体牵头单位），负责完成测绘技术服务：《三台县河湖岸线保护与利用规划》《三台县水利基础空间布局规划》《三台县“十四五”水利发展规划》资料收集、水利工程带状测绘、管理保护范围划定、埋桩工作和本项目需要的其他测绘工作。\n四川南充水利电力建筑勘察设计研究院（联合体成员单位），负责完成《三台县河湖岸线保护与利用规划》、《三台县水利基础空间布局规划》、《三台县“十四五”水利发展规划》报告编制工作。', '2020-10-16', NULL, NULL, '2', NULL, 7, '2020-10-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410358610942', 'HT2020W051', NULL, '新龙县安戈、耶勒克光伏电站工程地形图测绘技术服务合同', NULL, '0238', 98000.00, NULL, NULL, 22, '2020-09-07', '本合同采用总价合同的承包方式，总价为9.8万元。', '2020-09-11', NULL, NULL, '2', NULL, 7, '2020-09-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410362562566', 'CMC1：A-23047', NULL, '广西资源抽水蓄能电站界桩测设工作技术服务采购合同', NULL, '0227', 493000.00, NULL, NULL, 22, '2023-07-28', '本合同含增值税合同总价人民币（大写）肆拾玖万叁仟元整(&yen;493000.00元)；其中：增值税额为：人民币（大写）贰万柒仟玖佰零伍元陆角陆分 (&yen;27905.66元)（适用税率6%）。不含增值税总价为：人民币（大写）肆拾陆万伍仟零玖拾肆元叁角肆分 (&yen;465094.34元)。\n本合同总价包括乙方提供合同范围内所有研究内容的技术服务全部费用，人民币（大写）肆拾玖万叁仟元整 (&yen;493000.00元)。若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以不含税合同总价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '已核', 7, '2023-07-31', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410366968717', 'CMC2：G-22028', NULL, '三台县2021年灾毁农田修复项目田型调整测量单位测绘合同书', NULL, '0145', 269000.00, NULL, NULL, 22, '2022-08-10', '第五条  费用依据\n1.费用依据：本次测量工作执行2022年8月9日三台县农业农村局与承包方竞争性谈判确定的价格为准。\n2.合同总价：269000.00元（大写：贰拾陆万玖仟元整）。', NULL, NULL, NULL, '2', '已核', 7, '2022-08-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410368129016', 'HT2023W004', 'YNPD（2023）KC-CG-21', '中国能源建设集团云南省电力设计院有限公司2023年二季度至2024年四季度航测内业技术服务框架协议', NULL, '0250', 760000.00, NULL, NULL, 22, '2023-06-02', '本框架协议预估价为 76 万元，协议费用为含税价格，根据工程项目的需求下订单，签订具体项目订单合同。附件二报价表中投标人所报单价为框招协议价，具体项目还需进行询价后价格谈判，确定中标单位，询价时合格供应商所报单价不得高于框招协议价，结算时以具体项目单价作为结算单价，最终订单合同价格=结算单价×工作量。\n合同形式：采用固定综合单价，在合同有效期内不因物价波动、政策调整等不确定因素而调整综合单价。具体实施项目的合同单价以甲方最终与中标单位签订航测内业服务技术服务为准。', NULL, NULL, NULL, '2', '已核', 7, '2023-06-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410373373665', 'HT2024W001', 'JH-FZCCS-2024035', '锦江区2024年老旧小区片区综合改造项目测绘（二标段）', NULL, '0034', 756800.00, NULL, NULL, 22, '2024-04-25', '1、合同暂估金额：人民币 756800 元（大写： 柒拾伍万陆仟捌佰元整 ）；\n2、单价：立面测绘（含测量及绘制建模并提交最终成果）1.54元/m²；平面测绘（含测量及绘制建模并提交最终成果） 0.19 元/m²；\n3、结算方式：以实际测绘量×中选单价，据实结算。但最终结算总金额不得超过本项目预算。', NULL, NULL, NULL, '2', '已核', 7, '2024-05-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410375591598', 'HT2021W009', NULL, '乳源瑶族自治县鹰峰路外立面整治项目（三期）增加立面测绘项目测量合同', NULL, '0141', 24420.00, NULL, NULL, 22, '2020-12-07', '根据国家测绘局《测绘工程产品价格》（国测财字[2002]3号单价为2.72元/m²，再打6折测绘面积为14963.2m²×2.72×0.6=24420.00元；大写：贰万肆仟肆佰贰拾元整。', '2020-12-12', NULL, NULL, '2', NULL, 7, '2021-03-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410382163554', 'HT2020W060', NULL, '两河口水电站库周交通木茹连接线测量技术服务合同', NULL, '0229', 55017.00, NULL, NULL, 22, '2020-09-10', NULL, '2020-10-21', NULL, NULL, '2', NULL, 7, '2020-10-20', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410388432085', 'HT2020W016', '5108242020000159-2', ' 苍溪县25条河流河湖管理范围划界服务采购项目（第二包）政府采购合同', NULL, '0010', 1397480.00, NULL, NULL, 22, '2020-06-22', '第七条 履约保证金\n1．乙方交纳合同总金额7%（小写：98000.00元）(大写：玖万捌仟元整)作为本合同的履约保证金。\n2．履约保证金作为违约金的一部分及用于补偿甲方因乙方不能履行合同义务而蒙受的损失。', '2020-06-29', NULL, NULL, '2', NULL, 7, '2020-06-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410389708702', 'HT2020W067', '5105252020001036', '古蔺县河湖水域岸线管理范围划界项目采购合同', NULL, '0070', 1510180.00, NULL, NULL, 22, '2020-10-20', '1、本合同总合同金额：人民币1510180.00元(大写：壹佰伍拾壹万零壹佰捌拾元整)。\n2、乙方在收到成交通知书后5个工作日内，按照招标文件约定以非现金的形式将履约保证金（合同金额的5%,计75509.00元）足额缴入为采购人指定的财政专户或向采购人提供履约保函。凭履约保证金缴纳凭证原件到甲方财务室开具票据，凭开具的票据或者履约保函签订本项目政府采购合同；\n3.、待乙方履约完成并经甲方验收合格后，通过以非现金的形式将履约保证金的由甲方凭《泸州市政府采购项目验收记录》在5个工作日内以非现金形式退还乙方签订合同时缴纳的履约保证金。', '2020-10-26', NULL, NULL, '2', NULL, 7, '2020-10-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410393321188', 'HT2020W054', NULL, 'G217线独山子至巩乃斯公路建设项目控制测量及地形成图外部采购项', NULL, '0170', 1978700.00, NULL, NULL, 22, '2020-08-24', '本项目为固定总价合同。乙方完成上述工作的含税全费用总价为人民币大写人民币壹佰玖拾柒万捌仟柒佰元整（￥1978700. 00）。 不含税合同价格为（小写） ￥1866698. 11，增值税为（小写） ￥112001. 89。', '2020-09-01', NULL, NULL, '2', NULL, 7, '2020-08-26', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410400120133', 'HT2021W047', '2021-01', '大竹县城乡规划编制中心大竹县城区地下管网普查、检测项目合同', NULL, '0042', 4050000.00, NULL, NULL, 22, '2021-10-20', '大竹县城区地下管网普查、检测范围为现状建城区，面积约27平方公里，涉及地下管网普查约600公里，地下管网检测约300公里。\n本合同为联合体协议中标合同，我公司为乙方一。\n分工：大竹县城区地下管网普查工作由四川中水成勘院测绘工程有限责任公司承担实施，竹县城区地下管网检测工作由四川迅立达科技有限公司承担实施，各自对承担工作的进度、质量及安全负责。\n1、本合同总价为￥8040000.00元（大写：人民币捌佰零肆万元整）。其中：大竹县城区地下管网普查工作量600公里，单价：6750元/公里；总价：4050000.00元；大竹县城区地下管网检测工作量300公里， 单价：13300元/公里；总价3990000.00元。\n2、以上费用为合同包干价，如实际工作量大于本合同约定的工作量，费用为包干价，如实际工作量小于本合同约定的工作量，则以实际工作量结算。', '2021-09-29', NULL, NULL, '2', NULL, 7, '2021-10-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410407248219', 'HT2020W052', NULL, '中南高科·佛山南海智汇电子制造中心项目-1#地块-一期宗地图测绘技术服务合同', NULL, '0056', 21163.60, NULL, NULL, 22, '2020-09-21', '工程总价款（含税）：人民币 21,163.60 元(大写： 贰万壹仟壹佰陆拾叁元陆角 )。税率：6 %', '2020-09-25', NULL, NULL, '2', NULL, 7, '2020-09-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410407875991', 'HT2021C006', 'NZK20220-21-01', '紫霞水电站预可阶段测绘技术服务合同', NULL, '0231', 1299700.00, NULL, NULL, 22, '2021-01-25', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币1299700.00   元（大写：壹佰贰拾玖万玖仟柒佰元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。', '2021-02-01', NULL, NULL, '2', NULL, 7, '2021-01-26', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410414675394', 'HT2020W069', '5113212020000673', '南部县水务局南部县菜子河等15条规模以下河流河道管理范围划定服务项目采购合同', NULL, '0116', 3500000.00, NULL, NULL, 22, '2020-12-01', NULL, '2020-12-18', NULL, NULL, '2', NULL, 7, '2020-12-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410416524017', 'HT2020W003', NULL, '巴南经济园区2020年4月-6月地形图测量及计算测绘合同', NULL, '0266', 185000.00, NULL, NULL, 22, '2020-04-24', NULL, '2020-04-30', NULL, NULL, '2', NULL, 7, '2020-04-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410416731296', 'HT2020C030', NULL, '番禺区62条河涌管网完善及农村生活污水查缺补漏工程测量技术服务合同', NULL, '0236', 309500.00, NULL, NULL, 22, '2020-10-20', '本项目暂定含税价是 309500 元（大写： 叁拾万玖仟伍佰元整）（增值税率为 6 %）。', '2020-10-30', NULL, NULL, '2', NULL, 7, '2020-10-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410421236154', 'HT2020C004', '拉姆2-20-01', '巴布亚新几内亚拉姆2水电站测绘技术服务合同', NULL, '0226', 340000.00, NULL, NULL, 22, '2020-05-14', '本合同采用混合计价，预估总价为34.00万元（含5万元备用金）。\n备用金用于支付10.1.2辅助工作费中除人员和设备进出场费以外发生的其它费用。该项费用的发生乙方需向甲方提供相关支撑材料，待甲方对费用发生的必要性和合理性进行审核后在合同结算款中支付给乙方，且支付总额不能超出5.00万元。', '2020-05-15', NULL, NULL, '2', '同意', 7, '2020-05-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410429524200', 'HT2021C050', NULL, '广州市白云区勘测设计项目测绘技术服务合同', NULL, '0231', 35000.00, NULL, NULL, 22, '2021-12-24', '经甲、乙双方协商，本合同采用总价承包计价方式，合同费用为人民币小写：3.50万元（大写：叁万伍仟元整）。\n本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。', '2021-12-30', NULL, NULL, '2', NULL, 7, '2021-12-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410430428516', 'HT2020W021', NULL, '江溉寸片区市政消火栓核查测绘成图项目', NULL, '0273', 97780.00, NULL, NULL, 22, '2020-08-10', '单价合同，项目施工单价:4405元/公里市政道路。\n项目工程实际费用，按施工核查的实际市政道路长度以4405元/公里市政道路、分片区进行工作量和费用统计，汇总后办理结算。', '2020-08-13', NULL, NULL, '2', NULL, 7, '2020-08-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410430800135', 'HT2021W033', NULL, '佛山市南海区西樵镇碧霞三路 A、B 地块勘测定界工程测量合同', NULL, '0064', 3300.00, NULL, NULL, 22, '2021-04-19', '经甲乙双方协商，一致同意本测量工程按照如下单价：\n测绘类型	单位	收费标准（元）	工作量	收费金额\n放线	点	150	                    22           3300\n合计			          	                   3300', NULL, NULL, NULL, '2', NULL, 7, '2021-04-21', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410441185548', 'HT2020W028', NULL, '阳山县“房地一体”农村不动产登记发证工作服务项目（片区四）政府采购合同', NULL, '0206', 2836363.42, NULL, NULL, 22, '2020-08-25', NULL, '2020-08-27', NULL, NULL, '2', NULL, 7, '2020-08-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410441228534', 'HT2020W072', '11-JF-2020-重黔6标-0-016', '重庆至黔江铁路6标精测网复测技术服务合同', NULL, '0264', 2211300.00, NULL, NULL, 22, '2020-11-02', '合同暂定总价（不含增值税）为：2086132.08 元（大写：贰佰零捌万陆仟壹佰叁拾贰元零角捌分（人民币），增值税税率 6 %，税额125167.92元（大写：拾贰万伍仟壹佰陆拾柒元九角二分），含增值税暂定总价为：2211300元（大写：贰佰贰拾壹万壹仟叁佰元（人民币）。暂定总价不作为结算依据，本合同最终结算总金额=经甲方签认的乙方实际完成的合格工作量×固定综合单价×（1+增值税税率6%）。', '2020-12-07', NULL, NULL, '2', NULL, 7, '2020-11-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410442959061', 'HT2023W002', NULL, '南海区樵江路改造（九江段）项目测绘工程合同', NULL, '0057', 0.00, NULL, NULL, 22, '2023-02-27', '由甲方核对乙方每三个月实际发生的工作量（以出具正式盖章的测绘报告书的全额结算，出具初稿报告的按90%结算）并经甲方确认后，甲方在十五个工作日内向乙方支付相关费用。', NULL, NULL, NULL, '2', '已核', 7, '2023-05-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410443000246', 'HT2021W062', NULL, '自贡市水系连通项目用地土地勘测测绘采购项目技术服务合同', NULL, '0280', 193000.00, NULL, NULL, 22, '2021-08-16', '本合同承包模式为总价包干，合同总金额为193000.00元（大写：人民币壹拾玖万叁仟圆整）。\n乙方完成所有土地核勘工作且提交成果资料，整体通过验收后，甲方向乙方支付所有款项，即193000.00元（大写：人民币壹拾玖万叁仟圆整）；\n鉴于该费用属水系连通PPP项目前期费用，具体支付由甲、乙双方与自贡市水务局、自贡中铁釜溪河水系治理项目建设有限公司签订四方支付协议后，由自贡中铁釜溪河水系治理项目建设有限公司一次性支付。', '2021-08-24', NULL, NULL, '2', NULL, 7, '2022-08-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410447192454', 'CMC2：A-23005', 'C.WW.2023-007', '城轨快线可研项目1：2000地形补测测绘项目结算合同', NULL, '0275', 422209.62, NULL, NULL, 22, '2023-03-13', '本项目乙方于2022年2月提交成果，全部测绘成果经甲方验收合格。至今距甲方验收已满一年，甲方向乙方一次性支付项目费用￥422209.62元（大写：肆拾贰万贰仟贰佰零玖元陆角贰分），含项目质量保证金。', NULL, NULL, NULL, '2', '已核', 7, '2023-03-14', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410461347563', 'CMC1：A-24023', NULL, '绵竹抽水蓄能电站技施阶段测绘技术服务合同', NULL, '0231', 71371.03, NULL, NULL, 22, '2024-05-24', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥71371.03元（大写：人民币柒万壹仟叁佰柒拾壹元零叁分），其中：不含税价款为人民币67331.16元（大写：人民币陆万柒仟叁佰叁拾壹元壹角陆分），适用增值税税率6 %，税费为人民币4039.87元（大写：人民币肆仟零叁拾玖元捌角柒分）。', NULL, NULL, NULL, '2', NULL, NULL, '2024-05-31', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410461901082', 'HT2020W039', NULL, '苍溪县25条河流河湖管理范围划界服务采购项目（第二包）政府采购合同', NULL, '0009', 1397480.00, NULL, NULL, 22, '2020-06-15', '乙方交纳合同总金额7%（小写：98000.00元）(大写：玖万捌仟元整)作为本合同的履约保证金。', '2020-06-07', NULL, NULL, '2', NULL, 7, '2020-06-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410468295383', 'HT2021W014', NULL, '邻水县易地搬迁农户房屋测绘服务项目测绘合同（二标）', NULL, '0108', 69930.00, NULL, NULL, 22, '2021-03-05', '邻水县袁市镇、两河乡、关河乡、龙桥乡、九龙镇、黎家乡、风垭乡、御临镇、丰禾镇、长滩乡、凉山乡、复盛乡共12个乡镇和石滓乡花房村、升坪村易地搬迁666户进行1:500宗地测量、房产测绘服务和资料的收集整理归档。\n经甲、乙双方友好协商，本合同单价为：105.00元/户，本合同暂定总价款为&yen;69930.00元（人民币大写陆万玖仟玖佰叁拾元整）。\n注：完工后根据合同单价，按实际完成工作量据实结算。', '2021-03-10', NULL, NULL, '2', NULL, 7, '2021-03-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410471261557', 'HT2020W005', NULL, '内江市市中区农村不动产登记外业测绘服务采购项目', NULL, '0121', 6187500.00, NULL, NULL, 22, '2020-04-10', '（一）本项目服务费用由以下组成：\n1	房产测绘	1500户	195元/户\n2	地籍测绘	1500宗	595元/宗\n3	地籍测绘及房产测绘	6000宗	790元/宗\n4	地籍核实	1500宗	175元/宗\n按照预估的工作量，该合同总价为：6187500.00元（大写：陆佰壹拾捌万柒仟伍佰元整）。最终费用以实际服务的项目类别的工作量*服务价格进行计算，不得超过合同总价。\n结算金额=当期实际测绘数量（以采购人最终认定的实际测绘数量为准）×中标单价。', '2020-04-13', NULL, NULL, '2', '同意', 7, '2020-04-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410473847805', 'CMC2：A-23002', 'N5105212022000265', '泸县2021年耕地“进出平衡”目标考核整改专项工作政府采购合同', NULL, '0111', 710000.00, NULL, NULL, 22, '2023-01-10', '合同金额：中标金额人民币71.00万元(大写：人民币柒拾壹万元整)。本合同为单价合同，按单价（120元/个）乘以实际省级核查通过图斑数据实结算，该项目总金额不超过71万元。', NULL, NULL, NULL, '2', '已核', 7, '2023-01-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410477612473', 'CMC1：A-23070', 'A484KX-2023-CH01', 'ML水库电站可研阶段实景三维建模及坐标转换测绘技术服务合同', NULL, '0231', 5248117.24, NULL, NULL, 22, '2023-09-25', '经甲、乙双方协商，本合同采用单价承包计价方式，合同总金额为人民币￥5248117.24元（大写：人民币伍佰贰拾肆万捌仟壹佰壹拾柒元贰角肆分），其中：不含税价款为人民币4951054.00元（大写：人民币肆佰玖拾伍万壹仟零伍拾肆元整），适用增值税税率6 %，税费为人民币297063.24元（大写：人民币贰拾玖万柒仟零陆拾叁元贰角肆分），最终以乙方实际完成经甲方验收合格的工作量进行结算。', NULL, NULL, NULL, '2', '已核', 7, '2023-09-26', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410480275457', 'CMC1：A-23050', 'KSLSXM23-02-2023-CH01', '理塘抽水蓄能电站规划加深阶段测绘技术服务合同', NULL, '0231', 132996.25, NULL, NULL, 22, '2023-08-04', '本合同为总价承包计价方式，合同总金额为人民币￥132996.25元（大写：人民币壹拾叁万贰仟玖佰玖拾陆元贰角伍分），其中：不含税价款为人民币125468.16元（大写：人民币壹拾贰万伍仟肆佰陆拾捌元壹角陆分），适用增值税税率6 %，税费为人民币7528.09元（大写：人民币柒仟伍佰贰拾捌元零玖分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-08', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410482291380', 'HT2022W027', NULL, '2022年度乳源瑶族自治县自然保护地自然资源统一确权登记项目', NULL, '0143', 314640.00, NULL, NULL, 22, '2022-06-24', '本项目为双乙方合同，合同金额为（大写）：壹佰柒拾肆万捌仟元整（￥1,748,000.00 元）人民币。我公司为乙方二，占合同总金额的18%，即314640.00元。\n乙方一（联合体牵头方） ： 广东联合金地不动产评估勘测设计有限公司\n乙方二（联合体成员方） ： 四川中水成勘院测绘工程有限责任公司', '2022-07-14', NULL, NULL, '2', NULL, 7, '2022-06-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410484403626', 'CMC1：A-22059', 'LHKCFW-201804-B1', '两河口移民代建工程新增施工测量技术服务补充协议', NULL, '0226', 994611.00, NULL, NULL, 22, '2022-11-01', '本合同总价为不含税价是93.8312万元(大写：玖拾叁万捌仟叁佰壹拾  贰元整),税金是5.6299万元(大写：伍万陆仟贰佰玖拾玖元整) (增值税 率为6%),含税价99.4611万元(玖拾玖万肆仟陆佰壹拾壹元) (具体明细详见附表),其中不含税价除合同另有约定外不变，若合同实施过程因国家政策因素导致增值税率改变，按国家相关政策执行。合同价格应当包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', NULL, NULL, NULL, '0', '已阅', 7, '2023-07-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410486906555', 'HT2020W070', NULL, '苍溪县基础测绘“十四五”规划编制项目服务合同', NULL, '0011', 158000.00, NULL, NULL, 22, '2020-11-02', '根据苍溪县基础测绘“十四五”规划编制项目采购中选结果，本项目编制服务费用为壹拾伍万捌仟元整（小写：158000.00元）。', '2020-11-05', NULL, NULL, '2', NULL, 7, '2020-11-04', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410489890606', 'HT2023W001', 'XN23D/XM/WX043', 'CPECC西南分公司2023-2025年度勘察设计战略合作单位框架协议-第8标段  测绘航空摄影、摄影测量与遥感', NULL, '0251', 0.00, NULL, NULL, 22, '2023-02-20', '本合同仅作为甲乙双方的战略合作框架约定，具体合作项目需双方另行签订单项合同，双方在具体项目中的权利义务以单项合同约定为准。', NULL, NULL, NULL, '2', '已核', 7, '2023-02-20', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410490192033', 'HT2022W020', NULL, '阿坝金川220kV输变电工程技术服务合同', NULL, '0084', 177500.00, NULL, NULL, 22, '2022-03-21', '5.1技术服务报酬总额为：人民币（大写）壹拾柒万柒仟伍佰元整（￥177500.00）（含税），其中，不含税价人民币壹拾陆万柒仟肆佰伍拾贰元捌角叁分（大写）（￥167452.83），增值税税率6%，增值税税额10047.17元。当合同约定的税率与国家税法规定及税务机关认定的税率不一致时，以国家税法规定及税务机关认定的税率为准进行调整，调整时以不含税价为基准，执行国家法规规定及税务机关规定的税率。\n该报酬包含乙方履行本合同所需全部费用，包括但不限于员工工资、加班费、咨询费、资料费、交通费、食宿费以及税费等。', '2022-03-28', NULL, NULL, '2', NULL, 7, '2022-04-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410497398215', 'HT2020W049', NULL, '南涧至云县高速公路控制地形测绘劳务辅助项目采购合同', NULL, '0220', 357900.00, NULL, NULL, 22, '2020-06-03', '合同总价（含增值税）为人民币大写：叁拾伍万柒仟玖佰元整，即￥357900元。', '2020-06-09', NULL, NULL, '2', NULL, 7, '2020-06-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410498151517', 'CMC2：G-23010', 'HDQLW-BD-D-2023023', '天津华电宝坻大白庄15万千瓦风电项目土地测绘技术服务合同', NULL, '0188', 640000.00, NULL, NULL, 22, '2023-09-15', '本合同含税总价为人民币640000.00元（大写：人民币陆拾肆万元整），适用增值税税率6%。本合同总价包括乙方提供本合同范围内所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。', NULL, NULL, NULL, '2', '已核', 7, '2023-09-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410498756858', 'HT2020W074', 'A2020-1040', '重庆第二机场预选场址地形图测绘测量专业分包合同', NULL, '0248', 2100000.00, NULL, NULL, 22, '2020-10-24', ' 本工程合同包干总价（含税）为￥ 2100000.00 元 ，大写：人民币贰佰壹拾万圆整。', '2020-10-28', NULL, NULL, '2', NULL, 7, '2020-10-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410500921664', 'HT2021W039', NULL, '理县杂谷脑镇胆杂木沟村坎木沟干海子勘测定界合同', NULL, '0103', 22000.00, NULL, NULL, 22, '2021-09-10', '经双方协议，工程总费用为 22000.00元 （大写:贰万贰仟元人民币）。合同双方签字生效三日内，甲方付乙方全款22000.00 元（大写:贰万贰仟元人民币）。', NULL, NULL, NULL, '0', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410507178532', 'CMC2：A-24001', NULL, '重庆轨道交通2023-2026年权限网运营变形监测（二标）项目1包外协合同协议书', NULL, '0275', 6941000.00, NULL, NULL, 22, '2024-01-04', '本合同为总价包干合同，合同总价为人民币：694.10万元(大写：陆佰玖拾肆万壹仟元整)。', NULL, NULL, NULL, '2', '已核', 7, '2024-01-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410507534625', 'HT2023C001', 'A174SG-2022-01', '双江口水电站产卵场地形图测绘技术服务合同', NULL, '0231', 135002.96, NULL, NULL, 22, '2023-02-10', '本合同为总价承包计价方式，合同总金额为人民币135002.96元（大写人民币壹拾叁万伍仟零贰元玖角陆分），其中：不含税价款为人民币127361.28元（大写人民币壹拾贰万柒仟叁佰陆拾壹元贰角捌分），适用增值税税率6 %，税费为人民币7641.68元（大写人民币柒仟陆佰肆拾壹元陆角捌分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-02-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410510061219', 'CMC2：A-22016', NULL, '监测项目年度日常外协合同 （2022年6月1日至2023年5月31日）', NULL, '0275', 0.00, NULL, NULL, 22, '2022-05-25', '乙方在2022年6月1日至2023年5月31日期间承接甲方指派的监测项目技术服务工作；具体工作内容、工作量及工期等甲方在单项工程合同中明确。\n第三条  监测工程费及结算办法\n1.合同费用在单项工程合同中明确。\n2.费用支付方式在单项工程合同中明确。', '2022-06-06', NULL, NULL, '2', '同意', 7, '2022-06-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410514703427', 'HT2021W006', NULL, '红原县规模以下河流管理保护范围划界服务采购项目技术服务合同', NULL, '0088', 2876000.00, NULL, NULL, 22, '2021-01-26', NULL, '2021-02-01', NULL, NULL, '2', NULL, 7, '2021-02-01', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410532316813', 'CMC2：A-24008', 'SGXZFD00SJJS2400030', '国网拉萨发电公司2024年羊湖电站取水口水位及压力钢管变形监测控制网复测校核合同', NULL, '0085', 1262872.00, NULL, NULL, 22, '2024-04-12', '技术服务报酬总额为：人民币（大写） 壹佰贰拾陆万贰仟 捌佰柒拾贰元整 1262872.00）（含税），其中，不含税价人民币 	壹佰壹拾玖万壹仟叁佰捌拾捌元陆角捌分 （大写）（1191388.68）， 增值税税率  6 %，增值税税额 71483.32 元。当合同约定的税率与 国家税法规定及税务机关认定的税率不一致时，以国家税法规定及税 务机关认定的税率为准进行调整，调整时以不含税价为基准，执行国家法规规定及税务机关规定的税率。\n该报酬包含乙方履行本合同所需全部费用，包括但不限于员工工资、加班费、咨询费、资料费、交通费、食宿费以及税费等。', NULL, NULL, NULL, '2', '已核', 7, '2024-04-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410534333954', 'HT2021W005', '20068A-2020-1', '四川重筠高速公路项目控制测量工程测量分包采购合同', NULL, '0258', 40000.00, NULL, NULL, 22, '2020-12-02', '经双方友好协商，本项目为固定单价合同，单价为2000元/点。合同总额根据实际工作量结算。合同价款包含承包方完成本项目所需的一切费用。控制点成果需经委托方验收合格。预估合同总额为人民币肆万元整（小写：40000元），增值税税率为6%。', '2020-12-22', NULL, NULL, '2', NULL, 7, '2020-12-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410537398469', 'CMC2：A-20005', NULL, '四川岷江汉阳电站大坝外部变形监测工程测量承包合同', NULL, '0131', 300000.00, NULL, NULL, 22, '2020-02-28', '本工程勘察测量合同为总价承包方式(费用包干使用)，合同价款（含税6%）为人民币叁拾万元整（小写：&yen;300000.00元），不含税合同价为&yen;283018.87元，税费为&yen;16981.13元。（详见附件 《汉阳电站大坝外部变形监测（一年定期观测及基准网基准值复测）经费计算书》', NULL, NULL, NULL, '0', '已阅', 7, '2023-07-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410540841551', 'HT2020W015', NULL, '剑阁县农村房地一体和集体建设用地确权登记项目（第四标段）服务合同', NULL, '0096', 5956600.00, NULL, NULL, 22, '2020-06-22', '2.1资金按三年分期拨付，第一年拨付40%，第二年拨付30%，第三年拨付30%。\n2.2第一年完成外业测绘并验收合格后支付第一年拨付款（40%）的合同价款的30%；\n2.3第一年完成权籍调查和资料收集后支付第一年拨付款（40%）的合同价款的20%；\n2.4第一年建立不动产数据库并整合到已有的不动产数据库且发证量不低于应发证量的90%后支付第一年拨付款（40%）的合同价款的30%；\n2.5第一年完成资料整理和移交，验收合格后支付第一年拨付款（40%）的合同价款的20%。\n2.6第二年拨付款（30%）和第三年拨付款（30%）分别每年年底支付。', '2020-07-09', NULL, NULL, '2', NULL, 7, '2020-06-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410542685455', 'CMC1：A-19023', 'SJK-CL-201902', '双江口水电站库周交通公路初步设计测量配合及施工图中桩测量工作服务合同', NULL, '0229', 1222700.00, NULL, NULL, 22, '2019-08-30', '合同不含税金额为人民币115.3490万元（大写：壹佰壹拾伍万叁仟肆佰玖拾元整），其中增值税税率为 6 %，增值税税额为人民币 6.9210 万元（大写：陆万玖仟贰佰壹拾元整），合同含税金额为人民币1222700.00元（大写：壹佰贰拾贰万贰仟柒佰元整）。', NULL, NULL, NULL, '0', '已阅', 7, '2023-07-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410545293791', 'HT2021W058', NULL, '（广东省韶关市）始兴县石人嶂莲花山重大安全隐患整治及道路扩征项目1：1000地形图测绘', NULL, '0151', 377078.56, NULL, NULL, 22, '2021-12-15', '1.本项目为综合单价项目，根据甲方提供的现场地形测绘范围，分为以下两部分：\n（1）红线范围内测绘单价按 0.23元/m²，地形测绘面积约为 946,290.05 m²（约1,419.43亩），合同费用为人民币（元）&yen;217,646.71（大写：贰拾壹万柒仟陆佰肆拾陆元柒角壹分 ）；\n（2）红线范围外测绘单价按 0.20元/m²，地形测绘面积约为 797,159.21 m²（约1,195.74亩），合同费用为人民币（元）&yen;159,431.84（大写：壹拾伍万玖仟肆佰叁拾壹元捌角肆分 ）；\n综上所述，红线范围内和红线范围外测绘费用合计为本项目总合同费用，合同金额合计为人民币（元）&yen;377,078.55（大写：叁拾柒万柒仟零柒拾捌元伍角伍分）。', '2021-12-17', NULL, NULL, '2', NULL, 7, '2021-12-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410548586173', 'HT2020W076', 'C.WW.2020-080', '两江新区龙兴、鱼复园区自来水管线及消火栓调查项目劳务分包结算合同', NULL, '0275', 592098.00, NULL, NULL, 22, '2020-11-06', '1.按《重庆市勘测院外协项目单价表》对乙方完成的实际工作量结算，两江新区龙兴园区探测管线长度115.639 公里，单价￥3000元/公里，结算费用为￥346917.00 元(大写：人民币 叁拾肆万陆仟玖佰壹拾柒元整 ),详见结算书；\n2.按《重庆市勘测院外协项目单价表》对乙方完成的实际工作量结算，两江新区鱼复园区探测管线长度81.727 公里，单价￥3000元/公里，结算费用为￥245181.0 元(大写：人民币贰拾肆万伍仟壹佰捌拾壹元整),详见结算书；', '2020-11-12', NULL, NULL, '2', NULL, 7, '2020-12-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410549017736', 'CMC1：A-23003', 'KSLSXM22-17-2022-CH01', '广东台山黄茅岗抽水蓄能水电站测绘技术服务合同', NULL, '0231', 210025.17, NULL, NULL, 22, '2023-01-09', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币210025.17元（大写：人民币贰拾壹万零贰拾伍元壹角柒分），适用增值税率为 6 %。其中不含税价为198136.95元（大写：人民币壹拾玖万捌仟壹佰叁拾陆元玖角伍分），增值税为11888.22元（大写：人民币壹万壹仟捌佰捌拾捌元贰角贰分）。若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '已核', 7, '2023-01-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410552881088', 'HT2021C002', NULL, '芦稿溪水库工程可研阶测绘技术服务合同', NULL, '0231', 65800.00, NULL, NULL, 22, '2021-01-15', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币65800.00   元（大写：陆万伍仟捌佰元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。', '2021-01-20', NULL, NULL, '2', NULL, 7, '2021-01-19', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410554677623', 'HT2020W008', NULL, '邻水县农村土地承包经营权确权登记航空摄影测绘技术服务合同补充协议2', NULL, '0106', 119700.00, NULL, NULL, 22, '2020-04-10', '无', '2020-04-16', NULL, NULL, '2', NULL, 7, '2020-04-14', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410556314675', 'HT2020C027', NULL, '霞曲流域水电规划测绘技术服务合同', NULL, '0237', 788500.00, NULL, NULL, 22, '2020-11-16', '本工程以双方签订的《霞曲流域水电规划测绘技术服务合同》为依据，采用总价承包模式。本合同总价为：￥788500.00元（大写：人民币柒拾捌万捌仟伍佰元整），本合同约定总价格为不含税价格+增值税，不含税价格为￥743866.00元，增值税税率为6%，增值税税额为44634.00元，不含税价格不因国家税率变化而变化，若在合同履行期间，遇国家税率调整，则增值税相应调整，从而价税合计相应调整，以开具发票的时间为准；包括乙方提供本合同范围内所有硬件、软件所需的全部费用。', '2020-11-20', NULL, NULL, '2', NULL, 7, '2020-11-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410559741274', 'HT2021C009', 'A186KX-21-02', '雅砻江牙根二级（多吉）水电站预可研阶段测绘技术服务合同（第二批次）', NULL, '0231', 151900.00, NULL, NULL, 22, '2021-01-26', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币15.19万元（大写：壹拾伍万壹仟玖佰元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。', '2021-02-03', NULL, NULL, '2', NULL, 7, '2021-01-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410560078279', 'HT2021W017', NULL, '华能大连市庄河海上风电场址Ⅳ1（350MW）项目扫海工程技术服务合同', NULL, '0252', 975200.00, NULL, NULL, 22, '2021-04-12', '本项目合同总额：￥ 975200 元（人民币 玖拾柒万伍仟贰佰元整 ）。其中：增值税税率6%，不含税金额 920000元,税额 55200元。此费用包含了乙方为完成本合同约定的技术服务项目所发生的人工、管理费、利润以及相关税费等所有费用。', '2021-04-17', NULL, NULL, '2', NULL, 7, '2021-04-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410561284288', 'HT2020C031', NULL, '两河口水电站移民项目普巴绒垃圾填埋场地形图测绘技术服务合同', NULL, '0227', 47000.00, NULL, NULL, 22, '2020-12-01', '本合同价格为人民币4.43万元，适用增值税税率6%，税费为人民币0.27万元，本合同总价为人民币4.7万元（大写：肆万柒仟元整），本合同价格为固定不变价格，增值税税额如遇国家有关税收规定调整做相应调整。', '2020-12-10', NULL, NULL, '2', NULL, 7, '2020-12-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410563023365', 'HT2021W056', NULL, '成彭快速路（彭州市段）工程先期启动段（K15+000~K22+000段）航测工作技术服务合同', NULL, '0022', 125000.00, NULL, NULL, 22, '2021-11-29', '经甲、乙双方协商，本工程采用固定总价承包方式。合同总金额为：￥125000.00（大写：人民币壹拾贰万伍仟元整）。此费用包含了乙方为完成本合同约定的技术服务项目所发生的人工、管理费、利润以及相关税费等所有费用。', '2021-12-01', NULL, NULL, '2', NULL, 7, '2021-11-30', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410565090039', 'CMC2：G-22020', 'CDT-SCJXGS-[2022]-0505', '新能源在役风电场2022年度沉降观测及水平度、垂直度检测技术服务合同及施工安全协议书', NULL, '0040', 454418.00, NULL, NULL, 22, '2022-05-06', '本合同为总价合同，合同价为:￥454418.00元（大写:肆拾伍万肆仟肆佰壹拾捌元整)，(不含税部分￥428696.23元，6%增值税￥25721.77元)。', '2022-05-16', NULL, NULL, '2', NULL, 7, '2022-05-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410568803046', 'HT2022W012', NULL, '南岭国家公园南水片区生态环境系统保护修复工程-南水水库环境保护工程三期（生态边坡治理）竣工图编制及工', NULL, '0142', 49000.00, NULL, NULL, 22, '2022-01-05', '根据韶关市网上中介服务超市平台中选通知书约定，合同总价为人民币肆万玖仟元整（小写：&yen;：49000.00元整）。', '2022-01-06', NULL, NULL, '2', NULL, 7, '2022-01-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410570164873', 'HT2021W024', '20210510001', '南海区桂澜路北延线工程一期（里水段）项目测绘工程合同书', NULL, '0059', 0.00, NULL, NULL, 22, '2021-05-05', NULL, '2021-05-11', NULL, NULL, '2', NULL, 7, '2021-05-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410571252124', 'HT2020W038', NULL, '剑阁县农村房地一体和集体建设用地确权登记项目（第四标段）服务合同', NULL, '0096', 5956600.00, NULL, NULL, 22, '2020-06-15', '第七条  履约保证金\n1、乙方缴纳合同总金额8%的履约保证金。\n2、该履约保证金在乙方违反合同约定或乙方在履行合同的过程中给甲方造成了损失，该履约保证金应当优先用于支付违约金或给甲方造成的损失。\n3、履约保证金自动转为质量保证金，乙方完全按照合同履行了义务，其工作成果达到了本合同约定条件并经验收合格后续服务期满后无息退还给乙方。乙方免费为甲方提供24个月的后续服务。', '2020-07-09', NULL, NULL, '2', NULL, 7, '2020-06-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410572550145', 'CMC1：A-22037', NULL, '龚嘴水电站鱼道工程渣场地形图测绘技术服务合同', NULL, '0231', 24600.00, NULL, NULL, 22, '2022-06-24', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币24600.00元（大写：人民币贰万肆仟陆佰元整），适用增值税率为 6 %。其中不含税价为23207.55元（大写：人民币贰万叁仟贰佰零柒元伍角伍分），增值税为 1392.45 元（大写：人民币壹仟叁佰玖拾贰元肆角伍分）。\n本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。除本合同另有约定外，此合同总价承包不予调整。', '2022-07-01', NULL, NULL, '2', NULL, 7, '2022-07-01', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410574457575', 'CMC2：A-24007', 'SGXZFD0OSJJS2400029', '国网拉萨发电公司2024年直孔、羊湖电站变形监测及资料整编合同', NULL, '0085', 1294029.00, NULL, NULL, 22, '2024-04-15', '技术服务报酬总额为：人民币（大写） 壹佰贰拾玖万肆仟 零贰拾玖元整 （1294029.00 ）（含税），其中，不含税价人民币1220782.08 （大写）（壹佰贰拾贰万零柒佰捌拾贰元零捌分）， 增值税税率 6 %，增值税税额 73246.92 元。当合同约定的税率与国家税法规定及税务机关认定的税率不一致时，以国家税法规定及税务 机关认定的税率为准进行调整，调整时以不含税价为基准，执行国家法规规定及税务机关规定的税率。\n该报酬包含乙方履行本合同所需全部费用，包括但不限于员工工资、加班费、咨询费、资料费、交通费、食宿费以及税费等。', NULL, NULL, NULL, '2', '已核', 7, '2024-04-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410578684211', 'CMC2：G-22024', NULL, '乳源县天然气管道及配套设施建设项目管网路由地形测绘及规划定桩测量项目测绘合同', NULL, '0139', 916000.00, NULL, NULL, 22, '2022-08-15', '本项目测绘费用为总合同费用，合同金额为&yen;916000.00元（大写：玖拾壹万陆仟元整）。', NULL, NULL, NULL, '2', '同意', 11, '2022-08-30', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410582765611', 'HT2022W022', '20220911036', '中国国土勘测规划院外协项目合同书-2021年度全国国土变更调查成果国家级核查及监理包10', NULL, '0244', 1197000.00, NULL, NULL, 22, '2022-04-18', '合同总金额为人民币（大写）壹佰壹拾玖万柒仟元整（￥：1197000元）。', '2022-04-25', NULL, NULL, '2', NULL, 7, '2022-04-20', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410583116216', 'HT2020C020', 'KSLSXM-20-01', '广州白云马沥物联网产业园水系改造测绘技术服务合同', NULL, '0231', 103144.00, NULL, NULL, 22, '2020-10-29', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币103144.00   元（大写：壹拾万叁仟壹佰肆拾肆元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。除本合同另有约定外，此合同总价承包不予调整。', '2020-11-02', NULL, NULL, '2', NULL, 7, '2020-11-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410583829702', 'HT2020W002', 'KWXN2020-19号', '甘洛县农村“房地一体”宅基地和集体建设用地确权登记项目（二标段）', NULL, '0067', 4650000.00, NULL, NULL, 22, '2020-04-10', '第八条履约保证金\n1、依据《中华人民共和国合同法》及其他有关法律法规规定，为保证乙方在该合同中承诺的履约义务得到切实履行，乙方应在本合同签订后20个工作日内向甲方支付履约保证金。\n2、为响应国家为企业减负号召，履约保证金金额为该标段控制价465万的3%，即13.95万。\n3、支付方式为：转账，银行保函\n   户    名：甘洛县自然资源局\n   开户银行：农行甘洛县支行\n   账    号：22653101040016111\n4、履约保证金的保证范围为乙方按甲方招标文件，合同约定应履行的全部义务。\n5、保证时间为该合同生效之日起至履约保证金退回之日。', '2020-04-20', NULL, NULL, '2', '同意', 7, '2020-04-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410584981902', 'HT2020W010', NULL, '贵州省六枝至安龙高速公路北盘江大桥、贵州省贵阳经金沙至古蔺高速公路乌江大桥等处二等跨河水准测量技术服', NULL, '0076', 0.00, NULL, NULL, 22, '2020-04-02', '本合同为单价合同，最终结算费用按实际完成工作量×单价。', '2020-04-20', NULL, NULL, '2', NULL, 7, '2020-04-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410597910958', 'HT2021W032', NULL, '都江堰市地下管线普查成果更新项目（包2）合同', NULL, '0046', 544500.00, NULL, NULL, 22, '2021-08-03', '7.1合同价款\n（1）本合同为单价合同，地下管线普查成果更新监理服务单价为176 元/公里，本包件中标金额为&yen;544500.00元（大写：伍拾肆万肆仟伍佰元整），按照本合同指定范围（见附件2：都江堰市地下管线普查范围示意图）完成普查区全部监理工作。合同总金额不超过本包件的中标金额。\n（2）合同总金额=监理服务单价×地下管线实际提交长度，实际提交长度为入库合格后的全野外探测管线长度。合同总金额超出本项目的中标金额时按照中标金额结算。', '2021-08-09', NULL, NULL, '2', NULL, 7, '2021-08-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410609832235', 'CMC2：K-23002', NULL, '简阳市东溪街道星光社区砂石资源储量服务合同', NULL, '0094', 276800.00, NULL, NULL, 22, '2023-06-26', '本合同费用采用总价承接方式，含税价格为&yen; 276800.00元（大写：贰拾柒万陆仟捌佰元整），适用增值税税率为6%。合同价为完成砂石资源储量服务的所有费用，包括为完成本项工程所需的下述所有费用：人工费（含勘察报告编写）、材料费（含损耗）、机械费、其他直接费、场地平整费、间接费、乙方的施工利润、税金等，及临时设施费、施工期的供水、供电费、普通搬迁以及乙方人员、设备和机具的进退场费、各种保险以及为上述工作而发生的安全文明措施费用等。', NULL, NULL, NULL, '2', '已核', 7, '2023-06-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410614180504', 'HT2020W063', NULL, '三台县柳溪河等8条河流河道管理范围划定服务项目技术服务合同', NULL, '0144', 1781600.00, NULL, NULL, 22, '2020-10-20', '合同总价款：1781600.00元（大写：壹佰柒拾捌万壹仟陆佰元整）。', '2020-11-03', NULL, NULL, '2', NULL, 7, '2020-10-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410615368699', 'HT2021W027', 'NHXC2021-001', '（2021年佛山市南海区）宗地整理入库项目（委托）合同', NULL, '0052', 818800.00, NULL, NULL, 22, '2021-05-26', '1.合同费用总额（含税）为人民币：捌拾壹万捌仟捌佰元整（￥818800.00元）。合同费用总额已包括乙方履行本合同义务所需的一切可预见和不可预见的费用，除此之外，乙方不得要求甲方另行支付其他费用。', '2021-06-03', NULL, NULL, '2', NULL, 7, '2021-05-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410622133006', 'HT2021W008', NULL, '横五支路北段道路排水管道内窥试验检测合同', NULL, '0269', 42845.00, NULL, NULL, 22, '2021-02-01', NULL, '2021-03-10', NULL, NULL, '2', NULL, 7, '2021-02-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410623897347', 'HT2021W030', NULL, '成都高新技术产业开发区发展改革和规划管理局成都高新区地下管线普查成果更新服务（第二包）采购合同', NULL, '0014', 7315660.00, NULL, NULL, 22, '2021-06-15', '本合同为单价合同，全野外探测单价为3580元/公里（大写：叁仟伍佰捌拾元/公里），内外业结合核实探测单价为2850元/公里（大写: 贰仟捌佰伍拾 元/公里），本合同最高预算金额为 7315660元（大写：柒佰叁拾壹万伍仟陆佰陆拾元整）。', '2021-06-24', NULL, NULL, '2', NULL, 7, '2021-06-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270402', 'CMC2：A-23009', '260-D2300026', '四川华电泸定水电有限公司泸定水电站2023年水库泥沙监测服务合同', NULL, '0163', 157000.00, NULL, NULL, 22, '2023-04-24', '本合同总价（价税合计金额）为大写人民币壹拾伍万柒仟元整（￥157000元），不含税价格148113.21元,税金为8886.79元（税率6%）。本合同价格为固定总价，合同价格包括合同范围内人工费、标准仪器仪表检定费、管理费、税金等全部费用以及应由受托人承担的义务、责任和风险所发生的一切费用，是完成本合同附件之技术监督范围内全部工作的所有费用。', NULL, NULL, NULL, '2', '已核', 7, '2023-04-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270405', 'CMC2：A-23006', 'SGXZFDO0SJJS2310022', '国网拉萨发电公司2023年直孔、羊湖电站变形监测及资料整编技术服务合同', NULL, '0085', 952923.00, NULL, NULL, 22, '2023-04-11', '5.1技术服务报酬总额为:人民币（大写)玫拾伍万贰任玫佰贰拾参元整(￥952923.00)(含税），其中，不含税价人民币_搠拾玫万搠任玫佰搠拾参元玫角陆分(大写)(￥898983.96 ) ,增值税税率6%，增值税税额53939.04_元。当合同约定的税率与国家税法规定及税务机关认定的税率不一致时，以国家税法规定及税务机关认定的税率为准进行调整，调整时以不含税价为基准，执行国家法规规定及税务机关规定的税率。\n该报酬包含乙方履行本合同所需全部费用，包括但不限于员工工资、加班费、咨询费、资料费、交通费、食宿费以及税费等。', NULL, NULL, NULL, '2', '已核', 7, '2023-04-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270406', 'CMC2：A-23010', 'SDN-SC/G023-397', '简阳地形图测量项目技术服务合同', NULL, '0178', 15000.00, NULL, NULL, 22, '2023-05-26', '本协议含税总价为人民币15000.00元（大写人民币：壹万伍仟元整），适用增值税税率6%。本协议总价包括乙方提供本协议范围内所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。', NULL, NULL, NULL, '2', '已核', 7, '2023-05-30', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270407', 'CMC2：A-23011', 'DGS-SG-2023-005号', '大渡河公司大岗山水电站大坝及库岸边坡监测设备设施完善工程合同', NULL, '0079', 8397590.00, NULL, NULL, 22, '2023-06-02', '3．合同总金额为人民币（大写）捌佰叁拾玖万柒仟伍佰玖拾元整（￥8397590.00 元），其中不含税清单总价 7578668.19 元，税金 818921.81 元。其价格组成详见已标价工程量清单。\n4．承包人项目经理： 周全 。\n5．工程质量符合仪器安装合格率 100%，单元工程合格率 100%，单元工程优良率≥90%，\n仪器完好率应为 100% 的标准。\n6．承包人应按照监理人指示开工，工期为 12 个月。\n4.2 履约担保\n（1）本合同履约担保采用履约保证金或银行保函的形式，保函应采用招标文件规定的格式，并由中国银行、中国建设银行、中国工商银行、中国农业银行或交通银行或发包人认可的其他银行支行及以上分支机构出具，其担保的金额为签约合同价的 10%。\n（2）承包人应保证其履约保函自本合同生效之日至发包人颁发工程接收证书且承包人已提交质量保函并经发包人认可之日止一直有效，在承包人收到发包人颁发的工程接收证书，且提交有效质量保函，发包人应在 28 天内将履约保函退还给承包人。若承包人未提交质量保函，则履约保函自动延期至发包人颁发工程缺陷责任期终止证书之日止一直有效，发包人应在工程缺陷责任期终止证书颁发之日后 28 天内将履约保函退还给承包人。若合同工期延长，则承包', NULL, NULL, NULL, '2', '已核', 7, '2023-06-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270412', 'CMC2：A-23007', NULL, '巴福大健康组团路网一标段第三方监测外协合同协议书', NULL, '0275', 1867000.00, NULL, NULL, 22, '2023-04-21', '本合同为总价包干合同，合同总价为人民币：1867000.00元（大写：壹佰捌拾陆万柒仟元整）。', NULL, NULL, NULL, '2', '已核', 7, '2023-04-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270418', 'CMC2：A-23026', 'YLTZ-TZC-DD2023022', '雅砻江桐子林水电站库区滑坡体测斜钻孔恢复合同', NULL, '0202', 849769.00, NULL, NULL, 22, '2023-09-22', '本合同采用单价、总价结合的承包方式。\n本项目合同价格为人民币大写：849,769.00元（￥捌拾肆万玖仟柒佰陆拾玖元）。\n本合同价格包括乙方向甲方提供本合同规定的所有合同项目及乙方全面履行本合同规定的责任和义务所需发生的全部费用，包括采购、包装、保管、运输及保险、交货、换货、退货、工地开箱检验等全部成本、合理利润及税费等费用，并包括本合同规定应由乙方承担的一切风险（包括物价和汇率等的变化）所需全部费用。本合同总价构成详见本合同《合同价格表》。\n自合同签订之日起300天内完成本合同所有工作。', NULL, NULL, NULL, '2', '已核', 7, '2023-09-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270419', 'CMC2：A-23025', 'GZFCG2023-16697 ', '西藏政府采购琼结县第三次全国土壤普查合同', NULL, '0137', 1449760.00, NULL, NULL, 22, '2023-11-06', '本项目为双乙方合同，乙方一：四川中水成勘院测绘工程有限责任公司；乙方二：四川省天晟源环保股份有限公司。本合同为总价合同，合同总金额为（大写）人民币壹佰陆拾玖万玖仟玖佰元整（&yen;1699900.00元），其中乙方一工作内容的合同金额为（大写）人民币壹佰肆拾肆万玖仟柒佰陆拾元整（&yen;1449760.00元），乙方二工作内容的合同金额为（大写）人民币贰拾伍万零壹佰肆拾元整（&yen;250140.00元）（乙方一、乙方二所完成工作及对应费用明细详见附件1合同价格清单）。', NULL, NULL, NULL, '2', '已核', 7, '2023-11-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270420', 'CMC2：A-23029', 'MED-QT-2023-048', '国能青海黄河玛尔挡水电站库区水温观测服务合同', NULL, '0082', 2898500.00, NULL, NULL, 22, '2023-11-16', '合同总金额为人民币(大写)：贰佰捌拾玖万捌仟伍佰元整（&yen;2898500.00），其价格组成详见已标价工程量清单及其报价表。本合同总价为人民币大写：贰佰捌拾玖万捌仟伍佰元整（&yen;2898500.00），其中：不含税金额人民币（大写）贰佰柒拾叁万肆仟肆佰叁拾叁元玖角陆分（&yen;2734433.96），增值税税额为人民币（大写）壹拾陆万肆仟零陆拾陆元零肆分（&yen;164066.04），增值税税率为6%。其价格组成详见已标价工程量清单及其报价表。如遇国家增值税税率政策调整，本合同不含增值税金额部分不变，含增值税金额根据国家政策进行调整。本合同金额为委托人为完成本合同约定事项所需的全部费用，不因服务期延长而调整。\n4.1受托人应在合同签订之前按照本合同招标文件规定向委托人提交履约保函并经委托人认可，担保金额为签约合同价的10%，履约保函应由受托人基本账户开户银行或国内五大银行（中国工商银行、中国建设银行、中国农业银行、中国银行、交通银行）之一的支行及以上银行机构出具。办理履约保函所发生的费用由受托人承担。', NULL, NULL, NULL, '2', '已核', 7, '2023-11-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270421', 'CMC2：A-23008', NULL, '国能青海黄河玛尔挡水电站水库泥沙监测合同', NULL, '0082', 5399615.00, NULL, NULL, 22, '2023-04-23', '本合同总价为人民币大写：伍佰叁拾玖万玖仟陆佰壹拾伍元整（￥5399615.00），其中：不含税金额人民币（大写）伍佰零伍万柒仟捌佰陆拾叁元玖角贰分（￥5057863.92），增值税税额人民币（大写）叁拾肆万壹仟柒佰伍拾壹元零捌分（￥341751.08）。一般项目、土建项目、设备安装及暂列金增值税税率为 9%，本底测量及运行期系统维护、监测、分析增值税税率为 6%，如遇国家增值税税率政策调整，本合同不含增值税金额部分不变，含增值税金额根据国家政策进行调整。具体组成详见经发包人确认的报价表。\n本合同采用固定单价+固定总价承包，其中：一般项目、本底测量、运行期系统维护、监测及分析为总价承包项目；土建项目、设备安装为单价承包项目。在合同履行期间，因物价变动或其它因素而导致的人工、材料及其它费用的变化不予调整合同总价。', NULL, NULL, NULL, '2', '已核', 7, '2023-04-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270422', 'CMC2：A-22018', 'CDT-GYYHPC-S-[2022]-107', '大唐观音岩水电开发有限公司变形监测控制网复测及坝前淤积和坝后冲刷测量项目合同', NULL, '0039', 578100.00, NULL, NULL, 22, '2022-09-27', '本合同采用单价承包，签约合同金额：人民币（大写伍拾柒万捌仟壹佰整）元（￥578100.00），其中不含税金额￥ 545377.36，税金￥32722.64。除合同明确的总价项目外，其余项目以实际发生计。', NULL, NULL, NULL, '2', '同意', 7, '2022-09-29', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270428', 'CMC1：A-24015', 'NZK23071-2024-CH01', '卡瓦白庆抽水蓄能水电站可研阶段技术服务合同', NULL, '0231', 1580002.29, NULL, NULL, 22, '2024-03-25', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥1580002.29元（大写：人民币壹佰伍拾捌万零贰元贰角玖分），其中：不含税价款为人民币1490568.20元（大写：人民币壹佰肆拾玖万零伍佰陆拾捌元贰角），适用增值税税率6 %，税费为人民币89434.09元（大写：人民币捌万玖仟肆佰叁拾肆元零玖分）。', NULL, NULL, NULL, '2', '已核', 7, '2024-03-26', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270429', 'CMC1：A-24012', NULL, '安徽省芜湖西形冲抽水蓄能电站建设征地界桩测设及居民点等地形地类图测绘技术服务合同', NULL, '0227', 473678.38, NULL, NULL, 22, '2024-03-11', '本合同为总价承包计价方式，合同总金额为人民币￥473678.38元（大写：人民币肆拾柒万叁仟陆佰柒拾捌元三角捌分），其中：不含税价款为人民币￥446866.40元（大写：人民币肆拾肆万陆仟捌佰陆拾陆元肆角整），适用增值税税率 6 %，税费为人民币￥26811.98元（大写：人民币贰万陆仟捌佰壹拾壹元玖角捌分），增值税税额如遇国家有关税收规定调整做相应调整。本合同包括乙方提供本合同范围内所有技术工作及相关咨询服务所需的全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2024-03-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270433', 'CMC1：A-24022', 'A174SG-2024-01', '双江口水电站测绘技术服务合同', NULL, '0231', 40948.65, NULL, NULL, 22, '2024-05-24', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥40948.65元（大写：人民币肆万零玖佰肆拾捌元陆角伍分），其中：不含税价款为人民币38630.80元（大写：人民币叁万捌仟陆佰叁拾元捌角），适用增值税税率6 %，税费为人民币2317.85元（大写：人民币贰仟叁佰壹拾柒元捌角伍分）。', NULL, NULL, NULL, '2', NULL, NULL, '2024-05-31', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270441', 'CMC1：A-24020', 'NZK23065-2024-CH01（补充）', '色达抽水蓄能电站规划加深阶段测绘技术服务补充协议', NULL, '0231', 43269.62, NULL, NULL, 22, '2024-04-30', '本补充协议暂定合同总价为人民币43269.62 元（大写：人民币肆万叁仟贰佰陆拾玖元陆角贰分），其中：不含税价款为人民币40820.40 元（大写：人民币肆万零捌佰贰拾元肆角），适用增值税税率6%，税费为人民币2449.22 元（大写：人民币贰仟肆佰肆拾玖元贰角贰分）。', NULL, NULL, NULL, '2', '已核', 7, '2024-04-30', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270447', 'CMC1：A-24017', 'NZK21301-2024-CH01（补充）', '道孚抽水蓄能电站可研阶段测绘技术服务补充协议', NULL, '0231', 75669.58, NULL, NULL, 22, '2024-04-08', NULL, '2024-04-10', NULL, NULL, '2', '已核', 7, '2024-04-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270454', 'CMC2：A-21030', 'YLTZ-TZC-ZD2021550', '雅砻江桐子林水电站2022~2026年度大坝外部变形和近坝区滑坡稳定性监测合同文件', NULL, '0202', 3146670.00, NULL, NULL, 22, '2021-11-01', '1.合同总金额为人民币（大写）壹仟零叁拾柒万玖仟伍佰捌拾元整（￥10,379,580.0元）。\n2.本合同工期为：2023年1月1日至2026年12月31日。\n4.2.1履约保证金形式承包人应按本招标文件规定的内容和格式在合同签订前或签订的同时，按本合同约定向发包人提交履约保证金，最迟必须在合同首次付款前提交履约保证金的形式：银行保函或现金或履约保证保险履约保证金金额：签约合同价×2%\n（1）保函担保应符合招标文件第四章“合同条款和格式”规定的履约保证金格式要求。发包人只接受中国银行、中国建设银行、中国工商银行、中国农业银行或交通银行支行及以上分支机构或者发包人认可的其他银行出具的保函。\n（2）现金担保，承包人应对公转账至发包人以下账户，担保金在履约保证期满后，发包人按照合同约定扣除相关违约或赔偿金后无息返还给承包人。\n户名：雅砻江流域水电开发有限公司\n账号：4083079810001\n开户行：招商银行成都市玉双路支行\n（3）履约保证保险应符合招标文件第四章“合同条款和格式”规定的履约保证金格式要求。发包人只接受在四川省设有分支机构且能提供履约保证金保证业务的四川分公司或者发包人认可的其他保险公司出具的履约保证保险。4.2.2履约保证金的有效', '2021-11-08', NULL, NULL, '2', NULL, 7, '2021-11-04', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270455', 'HT2021W002', 'BL2020/D-50', '巴拉水电站工程测量中心技术服务承包合同', NULL, '0186', 4938260.00, NULL, NULL, 22, '2021-01-07', '本合同签约合同价5338260元（大写人民币伍佰叁拾叁万捌仟贰佰陆拾元整）。\n本合同价格中包括承包人为完成本合同规定的全部工作需支付的一切费用、利润和政策性文件规定等各项应有的税费，并考虑了合同规定(含明示、暗示规定)由承包人承担的风险所发生的一切费用。\n本合同暂列金额为40万元，由发包人支配。', '2021-01-14', NULL, NULL, '2', NULL, 7, '2021-01-08', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270456', 'HT2020W042', NULL, '大渡河双江口水电站测绘技术服务合同', NULL, '0231', 80100.00, NULL, NULL, 22, '2020-07-10', '本合同采用总价承包模式，合同总价为8.01万元。', '2020-07-16', NULL, NULL, '2', NULL, 7, '2020-07-14', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270457', 'HT2020W006', 'CH-19-13', '大渡河金川水电站工程测量中心劳务配合项目合同', NULL, '0242', 8596200.00, NULL, NULL, 22, '2020-04-01', '签约合同价(含税)暂定：人民币(大写)捌佰伍拾玖万陆仟贰佰元整(&yen;8596200.00)，其中不含税金额为&yen;8109622.64)，税率为6 %（因未来税收政策调整，合同未结算部分的适用税率应相应调整，保持不含税总金额不变），其中安全文明措施费用投入不少于合同价格的0.8%。', '2020-05-15', NULL, NULL, '2', '同意', 7, '2020-05-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270458', 'HT2022W001', 'GDAS-CSJ-KS-2022-001', '国能四川阿水电力开发有限公司绰斯甲水电站工程测量中心技术服务合同', NULL, '0083', 11532637.00, NULL, NULL, 22, '2022-01-10', '合同总额为人民币（大写）壹仟壹佰伍拾叁万贰仟陆佰叁拾柒元整（&yen;11532637.00元），其中不含税金额为人民币（大写）壹仟零捌拾柒万玖仟捌佰肆拾陆元贰角叁分（&yen;10879846.23元），税金为人民币（大写）陆拾伍万贰仟柒佰玖拾元柒角柒分（&yen;652790.77元），税率为6%，当国家法律法规规定的税率调整时，本合同税率、税额、含税合同价格随之调整。委托人按招标文件相关规定向承包人结算支付。', '2022-01-18', NULL, NULL, '2', NULL, 7, '2022-02-14', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270459', 'HT2021W018', 'YLGZ-LHKA-GG2021016', '四川雅砻江两河口水电站工程测量中心延期服务合同', NULL, '0201', 5634323.00, NULL, NULL, 22, '2021-03-15', '1、本延期合同总价为人民币伍佰陆拾陆万贰仟壹佰叁拾贰元整（&yen;5,662,132元）（含备用金50万元整），投入人月数为288人月。\n2、本合同备用金总额为50万元整，备用金用于支付下列费用：\n（1）经发包人同意承包人聘请的咨询专家费用；\n（2）经发包人同意开支的专项费用或外委费用；\n（3）由发包人组团出外考察费用；\n（4）发包人委托的合同范围外测量项目；\n（5）发包人同意的其他费用等。', '2021-04-01', NULL, NULL, '2', NULL, 7, '2021-03-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410631270464', 'CMC2：A-24009', 'PZH-FW-2024-08', '金沙江金沙水电站2024年度泥沙淤积断面及生态流量监测断面测量服务项目合同', NULL, '0171', 332520.00, NULL, NULL, 22, '2024-05-10', '本合同总价（不含税）为人民币（大写）叁拾壹万叁仟陆佰玖拾捌元壹角壹分（￥ 313698.11），税率为6 %，税费为人民币（大写） 壹万捌仟捌佰贰拾壹元捌角玖分（￥18821.89），含税价格为人民币（大写）叁拾叁万贰仟伍佰贰拾元整（￥332520 ）。本合同约定价格为含税价格，在合同履行期间，不含税价格固定不变，如遇国家的税率调整，则价税合计的价格应相应调整，以开具发票的时间为准。', NULL, NULL, NULL, '2', '同意', 11, '2024-05-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410639574064', 'HT2021W025', NULL, '南海区桂澜路北延线工程二期（里水段）项目测绘工程合同书', NULL, '0059', 0.00, NULL, NULL, 22, '2021-05-05', NULL, '2021-05-07', NULL, NULL, '2', NULL, 7, '2021-05-07', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410640506692', 'HT2022C005', 'CD2C20220055', '直孔抽蓄电站项目建议书测量技术劳务服务合同', NULL, '0237', 130000.00, NULL, NULL, 22, '2022-01-10', '6.1 合同总价\n本合同总价为： 130000 元（大写：壹拾叁万元整），本合同约定总价格为不含税价格+增值税，不含税价格为￥ 122641.51 元，增值税税率为 6 %，增值税税额为￥ 7358.49 元，不含税价格不因国家税率变化而变化，若在合同履行期间，遇国家税率调整，则增值税相应调整，从而价税合计相应调整，以开具发票的时间为准；包括乙方提供本合同范围内所有硬件、软件所需的全部费用。', '2022-01-14', NULL, NULL, '2', NULL, 7, '2022-01-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410641620227', 'HT2020W035', NULL, '南网数研院航飞影像服务建设项目粤西（湛江，茂名，阳江，云浮）标包合同', NULL, '0119', 1925000.00, NULL, NULL, 22, '2020-07-17', '甲方向乙方支付的技术服务报酬总额为：人民币壹佰玖拾贰万伍仟圆元（大写），￥1925000.00（小写），其中包含增值税额：人民币壹拾万捌仟玖佰陆拾贰元贰角陆分（大写），￥108962.26（小写）(最终含税价按照增值税纳税义务发生时国家执行的税率计算)。', '2020-09-01', NULL, NULL, '2', NULL, 7, '2020-07-21', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410643459009', 'HT2021W031', NULL, '四川德阳高速公路项目控制测量工程测量分包采购合同', NULL, '0258', 20000.00, NULL, NULL, 22, '2021-06-02', '经双方友好协商，本合同为含税综合单价合同，根据预估工作量，预估合同含税总价为人民币贰万元整（小写：20000.00 元），增值税税率为 6 %。', '2021-06-15', NULL, NULL, '2', NULL, 7, '2021-06-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410649435558', 'CMC2：G-24003', '项目编号：51018923210200006370', '成都高新区“实景三维成都”建设服务（包1）采购合同', NULL, '0015', 8501760.00, NULL, NULL, 22, '2024-03-28', '本合同为单价合同（单价见中标单价表），据实结算。结算总金额为六类产品的中标单价×实际汇交入库面积之和，最终结算金额不超过本项目预算金额，本项目预算金额为人民币8501760.00元（大写：捌佰伍拾万零壹仟柒佰陆拾元整）。合同结算总金额是乙方响应本项目要求的全部工作内容的价格体现，包括乙方完成本项目所需支出的一切费用及其响应文件中承诺的一切附加服务。', NULL, NULL, NULL, '2', '已核', 7, '2024-03-29', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410649460614', 'HT2023W003', NULL, '双流思达能地形图测量项目', NULL, '0178', 15000.00, NULL, NULL, 22, '2023-08-30', '本协议含税总价为人民币15000.00元（大写人民币：壹万伍仟元整），其中不含税价款为14150.94元（大写人民币：壹万肆仟壹佰伍拾元玖角肆分），适用增值税税率6%，税费为849.06元（大写人民币：捌佰肆拾玖元零陆分）。本协议总价包括乙方提供本协议范围内所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。', NULL, NULL, NULL, '2', '已核', 7, '2023-09-01', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410660630529', 'CMC1：A-23057', NULL, '阆中抽水蓄能电站规划阶段测绘技术服务合同', NULL, '0231', 140285.70, NULL, NULL, 22, '2023-08-14', '本合同为总价承包计价方式，合同总金额为人民币￥140285.70元（大写：人民币壹拾肆万零贰佰捌拾伍元柒角），其中：不含税价款为人民币132345.00元（大写：人民币壹拾叁万贰仟叁佰肆拾伍元整），适用增值税税率6 %，税费为人民币7940.70元（大写：人民币柒仟玖佰肆拾元柒角）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410662935365', 'HT2020W011', '20200428001', '飞鸿馆联合测绘合同', NULL, '0061', 190336.59, NULL, NULL, 22, '2020-04-27', '本合同为单价合同，暂定合同总价为￥190336.59。\n实际测绘工程费按实结算，即根据实际测绘项目类型和实际工作量核计。实际工作量以加盖佛山市自然资源局测绘成果质量检验合格章的测绘成果报告为准。', '2020-06-01', NULL, NULL, '2', '同意', 7, '2020-04-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410668416776', 'CMC1：A-23032', NULL, '岷江干流张坎航电枢纽工程界桩测设等工作技术服务合同', NULL, '0227', 483500.00, NULL, NULL, 22, '2023-05-18', '本合同不含税价格为人民币456132.08元，适用增值税税率6%，税费为人民币27367.92元，故本合同含税总价为人民币483500元（大写：人民币肆拾捌万叁仟伍佰元整）。本合同不含税价格为固定不变价格，增值税税额如遇国家有关税收规定调整做相应调整。本合同价包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2023-07-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410674477562', 'HT2021W023', NULL, '四川自贡市富荣产城融合带基础设施建设项目（C、D段）工程2工段测量合同', NULL, '0220', 226300.00, NULL, NULL, 22, '2021-05-10', '5.1 双方协商为合同总价（含增值税）为人民币大写：贰拾贰万陆仟叁佰元整，即RMB￥226300.00 元。\n备注：1、最终报价含 2%的生产安全费用。2、最终按实际工作量结算。', '2021-05-22', NULL, NULL, '2', NULL, 7, '2021-05-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410675101646', 'CMC2：G-22029', NULL, '都江堰市林权和土地承包经营权数据整合建库项目', NULL, '0046', 1726000.00, NULL, NULL, 22, '2022-12-02', '本项目以中标价为签约合同价。中标价为人民币1726000.00元（大写：人民币壹佰柒拾贰万陆仟元整）。', NULL, NULL, NULL, '2', '已核', 7, '2022-12-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410678892336', 'HT2022C026', 'CD2C20220565', '大唐普格中梁子区域则洛日风电场、马洪风电场项目地形图测绘工作技术服务合同', NULL, '0238', 728300.00, NULL, NULL, 22, '2022-05-16', '本合同总价为人民币728300元（大写：捌拾贰万捌仟叁佰元整）（含增值税，税率6%，不含税金额为687075.47元），具体价格构成详见《项目经费组成表》（附件1）。本合同总价为固定不变价格，包括乙方提供本合同范围内所有技术服务所需的全部费用。', '2022-05-20', NULL, NULL, '2', NULL, 7, '2022-05-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410682247824', 'HT2020C025', NULL, '凉山州盐源县光伏扶贫电站地形图测绘技术服务合同', NULL, '0238', 534600.00, NULL, NULL, 22, '2020-11-10', '本合同总价为：￥534600.00元（大写：人民币伍拾叁万肆仟陆佰整），本合同约定总价格为不含税价格+增值税，不含税价格为￥504300.00元，增值税税率为6%，增值税税额为30300.00元，不含税价格不因国家税率变化而变化，若在合同履行期间，遇国家税率调整，则增值税相应调整，从而价税合计相应调整，以开具发票的时间为准。', '2020-11-16', NULL, NULL, '2', NULL, 7, '2020-11-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410683729479', 'HT2021W013', NULL, '通江县自然资源和规划局农村“房地一体”确权登记发证采购项目（第四包）合同书', NULL, '0189', 7760896.00, NULL, NULL, 22, '2021-01-13', '1.服务费用：本项目中标单价为228.80元/宗，预估工作量33920宗，预计总价￥7760896.00元（大写：人民币柒佰柒拾陆万零捌佰玖拾陆元整）。最终结算按每宗分项价格乘以不动产登记权籍库实际入库工作量据实结算。', '2021-02-05', NULL, NULL, '2', NULL, 7, '2021-03-31', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410687106800', 'HT2020W045', NULL, '两江新区市政消火栓普查测绘成图项目合同', NULL, '0268', 226000.00, NULL, NULL, 22, '2020-07-01', NULL, '2020-08-03', NULL, NULL, '2', NULL, 7, '2020-07-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410691482684', 'HT2020C002', 'NZK460-20-01', '铜街子水电站测绘技术服务合同', NULL, '0226', 31468.00, NULL, NULL, 22, '2020-05-09', '本合同采用总价承包模式，总价为￥31468.00元。', '2020-05-12', NULL, NULL, '2', '同意', 7, '2020-05-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410691938675', 'HT2022C020', 'A418CB-2022-02', '老木孔航电枢纽工程施工阶段水下地形测绘技术服务合同', NULL, '0231', 474800.00, NULL, NULL, 22, '2022-03-18', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总费用为人民币小写：47.48万元（大写：肆拾柒万肆仟捌佰元整）。其中：不含税金额为447924.53元（大写：肆拾肆万柒仟玖佰贰拾肆元伍角叁分），税额为（6%增值税）26875.47元（大写：贰万陆仟捌佰柒拾伍元肆角柒分）。\n本合同单价已包括为完成工作所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润等全部费用。', '2022-03-23', NULL, NULL, '2', '已核', 7, '2022-03-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410692363818', 'HT2019W002', 'LJY-2019013', '四川省李家岩水库工程永久界桩测设及埋设工程服务合同', NULL, '0027', 260000.00, NULL, NULL, 22, '2019-11-29', NULL, '2019-11-11', NULL, NULL, '2', '同意。', 9, '2020-03-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410694184962', 'CMC1：A-23051', 'NZK23065-2023-CH01', '色达抽水蓄能电站预可阶段测绘技术服务合同', NULL, '0231', 218553.77, NULL, NULL, 22, '2023-08-09', '本合同为总价承包计价方式，合同总金额为人民币￥218553.77 元（大写：人民币贰拾壹万捌仟伍佰伍拾叁元柒角柒分），其中：不含税价款为人民币206182.80元（大写：人民币贰拾万零陆仟壹佰捌拾贰元捌角），适用增值税税率6 %，税费为人民币12370.97元（大写：人民币壹万贰仟叁佰柒拾元玖角柒分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410695968877', 'HT2021W055', NULL, '宜宾市叙州区林权档案电子化及存量数据整合建库采购项目合同', NULL, '0212', 2909000.00, NULL, NULL, 22, '2021-11-15', '本项目采用总价承包方式，中标总金额为&yen;2909000.00元（大写：贰佰玖拾万零玖仟元整）。\n履约保证金为本次合同成交总金额的5%即人民币145450元。由乙方在本签订合同前向甲方以转账方式缴纳；项目质量保证期满（自项目验收合格之日起算）后10个工作日内无息退还。', '2021-11-19', NULL, NULL, '2', NULL, 7, '2021-11-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410696485210', 'HT2020W030', 'JF2020(NH)WZ0066 ', '（佛山市南海区）区重点基础设施项目征地拆迁测绘服务采购合同', NULL, '0062', 0.00, NULL, NULL, 22, '2020-08-11', '根据实际发生额计算，具体以各镇（街）拆迁办于甲方签订的服务合同约定为准。\n本项目服务资格期限共三年，其中：\n第一年：2020年8月17日至2021年8月16日；\n第二年：2021年8月17日至2022年8月16日；\n第三年：2022年8月17日至2023年8月16日。\n采购合同书须每年签订一次，本合同期为第一年，服务期限为2020年8月17日至2021年8月16日。', '2020-08-17', NULL, NULL, '2', NULL, 7, '2020-08-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410696862705', 'HT2021W052', NULL, '2021年清新区耕地安全利用实施服务项目（核勘）技术服务合同', NULL, '0174', 329000.00, NULL, NULL, 22, '2021-11-04', '六、付款方式\n1．服务金额：人民币叁拾贰万玖仟元整（￥329000.00元）。\n2．付款方式：\n乙方完成所有土地核勘工作且提交成果资料，该项目整体通过验收后，甲方向乙方支付所有款项，大写：人民币 叁拾贰万玖仟 元整；\n乙方向甲方提供一般纳税人增值税专用发票。', '2021-11-02', NULL, NULL, '2', NULL, 7, '2021-11-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410697335060', 'HT2020W031', NULL, '蒲江县城区19.37平方千米1:500数字线划图、数字正射影像图生产和更新项目合同书', NULL, '0126', 750000.00, NULL, NULL, 22, '2020-08-04', NULL, '2020-08-14', NULL, NULL, '2', NULL, 7, '2020-08-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410700168790', 'CMC2：A-22012（补充）', NULL, '重庆轨道交通4号线西延伸段（一标段）土建2标、土建5标出入段线第三方监测补充协', NULL, '0275', 3216000.00, NULL, NULL, 22, '2023-12-22', '甲方与乙方的原合同费用根据“重庆市轨道交通(集团)有限公司核定 的工作量表”同比增减，暂定新增1.34倍(金额为321.6万元),最终结算 费用的增减比例与甲方和重庆市轨道交通(集团)有限公司签订的《重庆轨道 交通4号线西延伸段第三方监控量测项目(一标段)合同》  (合同编号：四号线西延-其-监测-2021-577-1)增减比例保持一致；', NULL, NULL, NULL, '2', '同意', 7, '2023-12-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410702539390', '2020G003', NULL, '巴南区一品街道金田村1：500地形图', NULL, '0002', 66000.00, NULL, NULL, 22, '2020-03-23', '本项目测绘工作已完成，目前甲方与我公司补签合同。', '2020-04-08', NULL, NULL, '2', NULL, 9, '2020-04-07', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410704801796', 'HT2020W064', 'NZK20217-20-01', '明台电站防洪堤修复设计测绘技术服务合同', NULL, '0231', 91600.00, NULL, NULL, 22, '2020-10-29', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币91600.00   元（大写：玖万壹仟陆百元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。除本合同另有约定外，此合同总价承包不予调整。', '2020-11-02', NULL, NULL, '2', NULL, 7, '2020-11-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410704986343', 'HT2020C003', 'A669KX-20-01', '芦稿溪水库测绘技术服务合同', NULL, '0226', 584610.00, NULL, NULL, 22, '2020-04-20', NULL, '2020-04-29', NULL, NULL, '2', NULL, 7, '2020-05-14', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410706686589', 'HT2020W013', NULL, '赣深高铁客运专线CPⅢ建网及复测技术服务合同', NULL, '0265', 473190.00, NULL, NULL, 22, '2020-01-07', '合同总额，根据乙方施工暂定范围，合同额约为￥473190.00元。', '2020-01-10', NULL, NULL, '2', NULL, 7, '2020-01-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410707730605', 'HT2022W011', NULL, '桂城街道夏南一与平西（兴仁村、蓬涌村、马根村、格涌村）旧村改造项目基础数据初查阶段技术核查测绘合同', NULL, '0055', 154050.00, NULL, NULL, 22, '2022-03-14', NULL, '2022-03-16', NULL, NULL, '2', NULL, 7, '2022-03-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410710962177', 'CMC1：A-23054', NULL, 'DG二级抽水蓄能电站预可阶段测绘技术服务合同', NULL, '0231', 160774.44, NULL, NULL, 22, '2023-08-16', '本合同为总价承包计价方式，合同总金额为人民币￥160774.44元（大写：人民币壹拾陆万零柒佰肆拾肆元肆角肆分），其中：不含税价款为人民币151674.00元（大写：人民币壹拾伍万壹仟陆佰柒拾肆），适用增值税税率6 %，税费为人民币9100.44元（大写：人民币玖仟壹佰元肆角肆分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410717329443', 'HT2020C007', 'NZK426-20-01', '岷江流域820泥石流灾害抢险及修复设计测绘技术服务合同', NULL, '0226', 54526.00, NULL, NULL, 22, '2020-07-20', '本合同采用总价承包模式。合同总价为5.4526万元。', '2020-07-28', NULL, NULL, '2', NULL, 7, '2020-07-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410717990743', 'HT2019W001', 'JCYDLG-20190106-甲0601', '宁夏 1:2000 基础地理信息数据库及“多库合一”项目数字线划图（DLG）生产合同', NULL, '0123', 197220.00, NULL, NULL, 22, '2019-11-29', NULL, '2019-07-04', NULL, NULL, '0', NULL, 15, '2020-03-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410719146467', 'HT2021C016', NULL, 'DG抽水蓄能电站测绘技术劳务服务合同', NULL, '0237', 358700.00, NULL, NULL, 22, '2021-04-29', '本工程以双方签订的《DG抽水蓄能电站测绘技术劳务服务合同》为依据，采用总价承包模式。本合同总价为：￥358700.00元（大写：人民币叁拾伍万捌仟柒佰元整）。本合同约定总价格为不含税价格+增值税，不含税价格为￥338396.23元，增值税税率为6%，增值税税额为￥20303.77元，不含税价格不因国家税率变化而变化，若在合同履行期间，遇国家税率调整，则增值税相应调整，从而价税合计相应调整，以开具发票的时间为准；包括乙方提供本合同范围内所有硬件、软件所需的全部费用。', '2021-05-07', NULL, NULL, '2', NULL, 7, '2021-04-30', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410727739393', 'CMC1：A-23064', NULL, '草登抽水蓄能电站规划阶段测绘技术服务合同', NULL, '0231', 95248.38, NULL, NULL, 22, '2023-08-28', '本合同为总价承包计价方式，合同总金额为人民币￥95248.38元（大写：人民币玖万伍仟贰佰肆拾捌元叁角捌分），其中：不含税价款为人民币89856.96元（大写：人民币捌万玖仟捌佰伍拾陆元玖角陆分），适用增值税税率6 %，税费为人民币5391.42元（大写：人民币伍仟叁佰玖拾壹元肆角贰分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-09-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410731507845', 'CMC2：A-23017', NULL, '苍溪抽水蓄能电站规划阶段工程地质勘察技术服务协议', NULL, '0008', 289600.00, NULL, NULL, 22, '2023-06-26', '经甲乙双方协商一致，本协议为单价合同，工作完成后按最终工作量据实结算，增值税税率为6%。本协议已包括乙方提供本协议范围内所有技术服务所需的全部费用（包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）。', NULL, NULL, NULL, '2', '同意', 7, '2023-06-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410736064124', 'HT2020W027', '5134252020000181', '会理县“房地一体”农村宅基地和集体建设用地确权登记发证项目采购合同（包三）', NULL, '0093', 5654000.00, NULL, NULL, 22, '2020-07-20', '本项目实行单价220元(大写：贰佰贰拾元)*实际测绘户数(预估为25700户)=实际结算总金额的方式，暂定合同总金额为: 5654000.00元（大写： 伍佰陆拾伍万肆仟元整 ）。\n本项目履约保证金为合同总价的10%，计人民币565400.00 元（大写：伍拾陆万伍仟肆佰元整），作为本合同的履约保证金。履约保证金以金融机构出具的保函形式提交。', '2020-07-22', NULL, NULL, '2', NULL, 7, '2020-07-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410738925672', 'HT2021W051', 'C.WW.2021-100', '重庆经开区建成区场镇和小区内部排水管网精细化普查项目内窥检测劳务外协合同', NULL, '0275', 240000.00, NULL, NULL, 22, '2021-10-15', '五、工程费用及结算：\n经友好协商，内窥检测(CCTV)单价人民币大写： 壹万贰仟元/公里，人民币小写： 12000 元/公里；内窥检测(QV) 单价为人民币大写：  陆仟元/公里，人民币小写： 6000 元/公里；预估总工作量为 25 公里，其中内窥检测(CCTV) 15公里，内窥检测(QV) 10 公里，总费用预估人民币大写：贰拾肆万元整，人民币小写：240000.00元。最终按实际完成工作量结算（如委托方在对外结算时，QV无法结算费用，则该合同中的QV部分不计费）。\n上述项目最终费用包括但不限于人工工资、加班费用、奖金、福利、社保、劳保等费用，实施作业必须的材料、设备、机械等费用，以及乙方管理、安全、交通、运输、利润、税金、各种风险等在内的一切费用。', '2021-10-18', NULL, NULL, '2', NULL, 7, '2021-10-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410738961210', 'CMC1：A-23093', 'A186KX-2023-CH04（补充）', '牙根二级水电站可研阶段测绘技术服务合同补充协议', NULL, '0231', 162151.49, NULL, NULL, 22, '2022-12-23', '本补充协议暂定合同总价为人民币162151.49元（大写：人民币壹拾陆万贰仟壹佰伍拾壹元肆角玖分），其中：不含税价款为人民币152973.10元（大写：人民币壹拾伍万贰仟玖佰柒拾叁元壹角整），适用增值税税率6%，税费为人民币9178.39元（大写：人民币玖仟壹佰柒拾捌元叁角玖分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-12-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410740602416', 'CMC2：G-22022', 'N5108112022000005', '广元市自然资源局昭化区分局昭化区林权权籍补充调查服务采购项目', NULL, '0073', 7350000.00, NULL, NULL, 22, '2022-08-01', '服务费用：\n经双方协商一致，本合同采用单价承包模式，合同单价为21.00 元/宗，项目费用根据合同单价按实际完成权籍调查宗数结算支付。本项目暂定宗数为 35 万宗。\n第七条  履约保证金\n1．乙方提交担保金额为 735000.00 元（大写：柒拾叁万伍仟元整 ）的银行保函作为本合同的履约保证金凭证。若乙方未按约缴纳履约保证金的，则甲、乙双方所签合同无效。\n2．项目完成最终验收后，甲方按保函的约定自动解除。履约保证金作为违约金的一部分及用于补偿甲方因乙方不能履行合同义务而蒙受的损失，乙方履约过程中给甲方造成任何损失，甲方可在履约保证金中直接扣除。', NULL, NULL, NULL, '2', '同意', 7, '2022-08-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410744516610', 'CMC1：A-23076', 'A186KX-2023-CH01', '牙根二级水电站可研阶段测绘技术服务合同', NULL, '0231', 580047.01, NULL, NULL, 22, '2023-10-10', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥580047.01元（大写：人民币伍拾捌万零肆拾柒元零壹分），其中：不含税价款为人民币547214.16元（大写：人民币伍拾肆万柒仟贰佰壹拾肆元壹角陆分），适用增值税税率6 %，税费为人民币32832.85元（大写：人民币叁万贰仟捌佰叁拾贰元捌角伍分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-10-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410746976608', 'HT2020W024', NULL, '重庆市永川区侨立水务有限公司城市供水管线补勘补测项目', NULL, '0278', 96000.00, NULL, NULL, 22, '2020-11-02', '本项目预计工作量在20公里左右，项目总价采用据实结算的方式，每公里4800元。合同预估总价为96000元。', '2020-11-17', NULL, NULL, '2', NULL, 7, '2020-10-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410752886583', 'CMC1：A-22051', NULL, '山西省沁水县龙港抽水蓄能项目界桩测设等工作技术服务合同', NULL, '0227', 425000.00, NULL, NULL, 22, '2022-11-01', '本合同总价为不含税价+税费，本合同含税价为人民币425000元（含税），税费为税率6%的增值税专用发票；不含税合同价为人民币400943元。合同总价包括乙方提供本合同范围内所有技术工作及相关咨询服务所需的全部费用，如遇国家税率调整，不含税价不变，税费相应调整。', '2022-11-17', NULL, NULL, '0', NULL, 10, '2024-05-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410759619061', 'CMC2：G-23004', NULL, '彭州市2022年国土变更调查监理项目合同书', NULL, '0124', 194000.00, NULL, NULL, 22, '2023-05-15', '该项目合同总价为194000.00元（大写：壹拾玖万肆仟元整），该合同总价已包括乙方在成交后响应甲方下达项目任务要求全部工作内容的价格体现，是履行合同的最终价格，包括人工费、差旅费、机械设备使用费、保险、培训、税费、设计费、成果制作工本费等完成测绘项目的所有费用，甲方不再支付任何费用。', NULL, NULL, NULL, '2', '已核', 7, '2023-05-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410768077938', 'CMC2：G-23011', 'HDQLW-BD-D-2023024', '天津华电宝坻黄庄12万千瓦风电项目土地测绘技术服务合同', NULL, '0188', 640000.00, NULL, NULL, 22, '2023-09-15', '本合同含税总价为人民币640000.00元（大写：人民币陆拾肆万元整），适用增值税税率6%。本合同总价包括乙方提供本合同范围内所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。', NULL, NULL, NULL, '2', '已核', 7, '2023-09-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410768387087', 'CMC2：A-24003', NULL, '仪陇县马鞍镇客博园测绘合同', NULL, '0160', 121091.71, NULL, NULL, 22, '2023-11-20', '本合同为单价合同，预算工程总价款：121091.71元（大写：壹拾贰万壹仟零玖拾壹元柒角壹分），工程完工后，根据实际测绘工作量核计实际工程价款总额。', NULL, NULL, NULL, '2', '已核', 7, '2023-12-01', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410776521153', 'CMC2：K-22002', NULL, '平泉街道新桥村储备土地2016-70号地块砂石资源量估算服务合同', NULL, '0094', 48000.00, NULL, NULL, 22, '2022-12-05', '本合同费用采用总价承接方式，含税价格为&yen; 48000.00元（大写：肆万捌仟元整），适用增值税税率为6%。合同价为完成砂石资源量估算服务的所有费用，包括为完成本项工程所需的下述所有费用：人工费（含勘察报告编写）、材料费（含损耗）、机械费、其他直接费、场地平整费、间接费、乙方的施工利润、税金等，及临时设施费、施工期的供水、供电费、普通搬迁以及乙方人员、设备和机具的进退场费、各种保险以及为上述工作而发生的安全文明措施费用等。', NULL, NULL, NULL, '2', '已核', 7, '2022-12-07', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410780227510', 'CMC1：A-24014', 'NZK22222-04', '新华电力发电有限公司博州10万千瓦储热型光热配件90万千瓦新能源项目1：500地形图测绘技术服务合同', NULL, '0238', 1300000.00, NULL, NULL, 22, '2024-03-12', '本合同为单价合同，暂定合同总价为人民币 1300000.00 元（大写 壹佰叁拾万元），其中：不含税价款为人民币 1226415.09 元（大写 壹佰贰拾贰万陆仟肆佰壹拾伍元玖分 ），适用增值税税率 6 %，税费为人民币 73584.91 元（大写壹分 柒万叁仟伍佰捌拾肆元玖角壹分 ）。', NULL, NULL, NULL, '2', '已核', 7, '2024-03-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410781807294', 'HT2020W046', NULL, '正安县毛家塘水力发电有限公司毛家塘水电站大坝安全监测合同', NULL, '0222', 200000.00, NULL, NULL, 22, '2020-03-10', '本合同总价为人民币￥200,000元（大写：贰拾万圆整）。\n本合同签订生效后，甲方在5日内向乙方支付合同总额20%的预付款；其余80%的合同款在乙方完成合同后，并开具全额增值税发票（6%税率）后同时支付。', '2020-03-13', NULL, NULL, '2', NULL, 7, '2020-03-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410782571556', 'CMC2：A-23021', NULL, '韶关市乳源瑶族自治县南水水库1:1000地形图数据入库项目合同', NULL, '0071', 78000.00, NULL, NULL, 22, '2023-07-03', '1、合同技术服务费\n项目含税总费用为￥78000.00元 （大写：柒万捌仟元整）。\n2、付款方式\n乙方工程完成结束后，一次性支付所有费用。', NULL, NULL, NULL, '2', '已核', 7, '2023-07-04', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410787749457', 'HT2020C034', 'A239KX-20-01', '岗托水电站可研设计阶段测绘技术服务合同', NULL, '0231', 667705.00, NULL, NULL, 22, '2020-12-21', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币667705.00   元（大写：陆拾陆万柒仟柒佰零伍元整）。', '2020-12-25', NULL, NULL, '2', NULL, 7, '2020-12-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410788654845', 'HT2022W030', NULL, '狮泉河水电站水库水位高程校验项目技术服务合同', NULL, '0224', 720000.00, NULL, NULL, 22, '2022-10-31', '双方商定，本合同固定总价为人民币720000.00元（大写：柒拾贰万元整），其中不含税金额为人民币679245.28元（大写：陆拾柒万玖仟贰佰肆拾五元贰角捌分），增值税税额人民币40754.72元（大写：肆万零柒佰伍拾肆元柒角贰分），税率6%；该固定总价包括完成本项目所规定的工作所承担的全部费用，不因任何因素而进行调整。如遇国家税率政策调整，合同价款不变，税率变更为国家政策规定适用税率，合同税款及价税合计金额作相应变更。', NULL, NULL, NULL, '2', '已核', 7, '2022-10-31', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410790653953', 'CMC1：A-23058', 'A237SG-2023-CH01', '孟底沟水电站实景三维模型测绘技术服务合同', NULL, '0231', 272347.92, NULL, NULL, 22, '2023-08-15', '本合同为总价承包计价方式，合同总金额为人民币￥272347.92元（大写：人民币贰拾柒万贰仟叁佰肆拾柒元玖角贰分），其中：不含税价款为人民币256932.00元（大写：人民币贰拾伍万陆仟玖佰叁拾贰元整），适用增值税税率6 %，税费为人民币15415.92元（大写：人民币壹万伍仟肆佰壹拾伍元玖角贰分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410798238379', 'HT2020C023', 'A237KX-20-01', '孟底沟对外交通辅助道路水毁修复工程测绘技术服务合同', NULL, '0231', 249700.00, NULL, NULL, 22, '2020-11-06', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币249700.00   元（大写：贰拾肆万玖仟柒佰元整）。', '2020-11-13', NULL, NULL, '2', NULL, 7, '2020-11-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410800220669', 'HT2020W032', NULL, '成都兴城投资集团有限公司2020年度建设项目工程测绘服务合同', NULL, '0032', 0.00, NULL, NULL, 22, '2020-06-15', '本项目各测绘工作计费方式：按Σ测绘产品实际工程量×对应测绘产品最高限价×乙方中选取费比例80%计取，该取费比例在合同实施期间固定不变，不作调整。各项测绘工作由甲方按照委托内容审核并确认实际工作量后，按本合同第四条约定的支付方式计取工程测绘费用。', '2020-06-23', NULL, NULL, '2', NULL, 7, '2020-06-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410800377254', 'HT2021W012', '510107202100077', '成都市武侯区地下管线普查成果更新探测服务合同', NULL, '0030', 21600000.00, NULL, NULL, 22, '2021-07-01', NULL, '2021-07-12', NULL, NULL, '2', NULL, 7, '2021-07-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410801314792', 'HT2021W042', NULL, '31121工程DQ河河道测量服务协议书', NULL, '0241', 138799.00, NULL, NULL, 22, '2021-09-30', '本项目预估总价为13.8799万元，最终合同金额由双方依据上述单价和实际工作量确定结算价，并据实结算。', '2021-09-30', NULL, NULL, '2', NULL, 7, '2021-09-30', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410811731415', 'HT2020W071', '5105252020001036', '古蔺县河湖水域岸线管理范围划界项目采购合同', NULL, '0070', 1510180.00, NULL, NULL, 22, '2020-10-15', '本合同总合同金额：人民币1510180.00元(大写：壹佰伍拾壹万零壹佰捌拾元整)。\n二、付款方式及期限\n1. 付款方式：划界成果（讨论稿）提交评审通过后支付 60%， 划界工程验收合格， 划界成果经古蔺县总河长办审定通过后支付 40%；\n2. 乙方在收到成交通知书后5个工作日内，按照招标文件约定以非现金的形式将履约保证金足额缴入为采购人指定的财政专户或向采购人提供履约保函。凭履约保证金缴纳凭证原件到甲方财务室开具票据，凭开具的票据或者履约保函签订本项目政府采购合同；\n3. 待乙方履约完成并经甲方验收合格后，通过以非现金的形式将履约保证金的由甲方凭《泸州市政府采购项目验收记录》在5个工作日内以非现金形式退还乙方签订合同时缴纳的履约保证金。\n4.本项目履约保证金办理的履约保函。', NULL, NULL, NULL, '2', NULL, 7, '2020-10-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410815819777', 'CMC1：A-23026', 'NZK21225-2023-CH01', '绵竹抽水蓄能电站可研阶段测绘技术服务合同', NULL, '0231', 169097.00, NULL, NULL, 22, '2023-04-24', '本合同采用单价承包计价方式，合同总金额预估为人民币￥169097.00元（大写：人民币壹拾陆万玖仟零玖拾柒元整），其中：不含税价款为人民币159525.47元（大写：人民币壹拾伍万玖仟伍佰贰拾伍元肆角柒分），适用增值税税率6 %，税费为人民币9571.53元（大写：人民币玖仟伍佰柒拾壹元伍角叁分），最终以乙方实际完成经甲方验收合格的工作量进行结算。', NULL, NULL, NULL, '2', '已核', 7, '2023-04-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410819737242', 'CMC2：G-23012', NULL, '昌都市四川桥改扩建工程地形图测绘项目测绘合同', NULL, '0192', 178200.00, NULL, NULL, 22, '2023-11-03', '乙方愿意以178200.00元（壹拾柒万捌仟贰佰元整）的价格承接昌都市四川桥改扩建项目1：500地形图测绘项目。', NULL, NULL, NULL, '0', NULL, NULL, '2023-11-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410820378356', 'HT2020C013', 'A081SG-20-01', '金沙江溪洛渡水电站测绘技术服务合同', NULL, '0231', 42000.00, NULL, NULL, 22, '2020-07-01', '本合同采用总价承包模式，合同总价为42000元。', '2020-07-06', NULL, NULL, '2', NULL, 7, '2020-07-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410822597241', 'HT2020W075', NULL, '青川县河湖管理范围划定（一包）政府采购合同', NULL, '0128', 810000.00, NULL, NULL, 22, '2020-12-01', '青川县河湖管理范围划定（一包）中标价为810000.00元整（大写：捌拾壹万元整）。', '2020-12-07', NULL, NULL, '2', NULL, 7, '2020-12-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410823903865', 'CMC1：A-21059', 'NZK20220-2021-02', '西藏紫霞水电站预可、可研阶段补充测量测绘技术服务合同', NULL, '0231', 218000.00, NULL, NULL, 22, '2021-12-13', '经甲、乙双方协商，本合同采用总价承包计价方式，合同费用为人民币小写： 218000.00元（大写：贰拾壹万捌仟元整）。不含税金额为205700.00元（大写：贰拾万伍仟柒佰元整），税额为12300.00元（大写：壹万贰仟叁佰元整）。', NULL, NULL, NULL, '2', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410824162394', 'HT2021W038', NULL, '理县杂谷脑镇西区公租房旁边勘测定界合同', NULL, '0103', 18000.00, NULL, NULL, 22, '2021-09-10', '经双方协议，工程总费用为 18000.00元 （大写:壹万捌仟元人民币）。合同双方签字生效三日内，甲方付乙方全款18000.00 元（大写:壹万捌仟元元人民币）。', NULL, NULL, NULL, '0', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410826406641', 'CMC2：G-23002', 'N5106822022000005', '宁南县自然资源局采购宁南县测量标志普查维护项目政府采购合同', NULL, '0122', 695000.00, NULL, NULL, 22, '2023-01-09', '该项目服务费用总额人民币大写：陆拾玖万伍仟元整，小写：695000.00元。', NULL, NULL, NULL, '2', '已核', 7, '2023-01-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410830329044', 'HT2021W043', NULL, '（广东）阳山县粮食生产功能区调整补划技术服务合同', NULL, '0205', 57500.00, NULL, NULL, 22, '2021-09-20', '合同金额为（大写）：伍万柒仟伍佰元整（￥57500.00元）。', '2021-10-22', NULL, NULL, '2', NULL, 7, '2021-10-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410832596993', 'CMC1：A-23077', 'NZK21254-2023-CH01', '叶巴滩混合式抽水蓄能电站可研阶段测绘技术服务合同', NULL, '0231', 1500013.63, NULL, NULL, 22, '2023-10-16', '经甲、乙双方协商，本合同采用单价承包计价方式，合同总金额为人民币￥1500013.63元（大写：人民币壹佰伍拾万零壹拾叁元陆角叁分），其中：不含税价款为人民币1415107.20元（大写：人民币壹佰肆拾壹万伍仟壹佰零柒元贰角），适用增值税税率6 %，税费为人民币84906.43元（大写：人民币捌万肆仟玖佰零陆元肆角叁分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-10-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410833955924', 'HT2020C024', NULL, '大唐普格海口风电场工程地形图测绘技术服务合同', NULL, '0238', 279000.00, NULL, NULL, 22, '2020-11-10', '本合同总价为：￥279000.00元（大写：人民币贰拾柒万玖仟元整），本合同约定总价格为不含税价格+增值税，不含税价格为￥263200.00元，增值税税率为6%，增值税税额为15800.00元，不含税价格不因国家税率变化而变化，若在合同履行期间，遇国家税率调整，则增值税相应调整，从而价税合计相应调整，以开具发票的时间为准。', '2020-11-16', NULL, NULL, '2', NULL, 7, '2020-11-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410834841431', 'HT2022W032', '川交设劳(2022测)10号', 'G7611线西昌至香格里拉段高速公路特长隧道二等控制网建立劳务合作协议书', NULL, '0170', 1866843.00, NULL, NULL, 22, '2022-12-01', '根据竞争谈判结果本项目预估总费用￥186.6843万元，大写:壹佰捌拾陆\n万陆仟捌佰肆拾叁元，各项价格见下表。最终费用按实际完成工作量和单价进行计算，双方需签订工作量确认单，工作量确认单见附件7。', NULL, NULL, NULL, '2', '已核', 7, '2022-12-26', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410839617904', 'CMC2：G-23003', 'N5111112023000004-1', '沙湾区集体土地所有权确权登记成果更新汇交工作政府采购合同', NULL, '0100', 684000.00, NULL, NULL, 22, '2023-05-10', '合同总价为人民币大写：陆拾捌万肆仟元，即￥684000.00 元；该合同总价已包括人工费、机具费、资料费、服务费、打印费、差旅费、税费、会务费等费用以及为完成该项目可能发生的所有费用。本合同执行期间合同总价不变，甲方无须另向乙方支付本合同规定之外的其他任何费用。', NULL, NULL, NULL, '2', '已核', 7, '2023-05-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410840613277', 'HT2021W015', NULL, '石棉县大熊猫科普公园1:500地形图测绘技术服务项目合同', NULL, '0182', 90490.00, NULL, NULL, 22, '2020-06-23', ' 合同总价款为:（小写）90490.00元，（大写）玖万零肆佰玖拾元整。\n支付方式：乙方提交符合项目要求的正式资料后，甲方一次性支付乙方全部合同款项。乙方应向甲方提供符合其财务要求的等额增值税专用发票（税率6%）。', '2020-07-10', NULL, NULL, '2', NULL, 7, '2020-06-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410843124272', 'HT2022W008', 'JX2022/S01', 'JX水电站土地报件审核审批服务合同', NULL, '0089', 395000.00, NULL, NULL, 22, '2022-01-20', '本项目合同总价为395000.00元（大写：叁拾玖万伍仟元整），其中不含税合同价为372641.51元，增值税税金为22358.49元（税率为6%）。合同执行期间，如遇法律法规或政策调整增值税税率，双方对未结算部分按不含税价不变的原则和调整后的税率办理结算。', '2022-02-23', NULL, NULL, '2', NULL, 7, '2022-01-21', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410849374209', 'CMC1：A-23062', NULL, '大邑抽水蓄能电站预可阶段测绘技术服务合同', NULL, '0231', 146967.52, NULL, NULL, 22, '2023-08-17', '本合同为总价承包计价方式，合同总金额为人民币￥146967.52元（大写：人民币壹拾肆万陆仟玖佰陆拾柒元伍角贰分），其中：不含税价款为人民币138648.60元（大写：人民币壹拾叁万捌仟陆佰肆拾捌元陆角），适用增值税税率6 %，税费为人民币8318.92元（大写：人民币捌仟叁佰壹拾捌元玖角贰分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410851279616', 'HT2020C026', NULL, '华电凉山盐源牦牛山风电场工程地形图测绘技术服务合同', NULL, '0238', 631900.00, NULL, NULL, 22, '2020-12-09', '本合同采用总价合同的承包方式，合同总价为￥631900.00元（大写：人民币陆拾叁万壹仟玖佰元整）（含6%增值税）。\n本合同总价为：￥631900.00元（大写：人民币陆拾叁万壹仟玖佰元整），本合同约定总价格为不含税价格+增值税，不含税价格为￥596100.00元，增值税税率为6%，增值税税额为35800.00元，不含税价格不因国家税率变化而变化，若在合同履行期间，遇国家税率调整，则增值税相应调整，从而价税合计相应调整，以开具发票的时间为准。', '2020-12-16', NULL, NULL, '2', NULL, 7, '2020-12-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410855458250', 'HT2021W048', NULL, '成华区地下管线普查更新探测服务（第2包）政府采购合同', NULL, '0020', 8817480.00, NULL, NULL, 22, '2021-10-18', '6、合同价款及支付方式\n6.1合同价款\n（1）本合同为单价合同，全野外探测单价为3645.00元/公里，内外业结合核实探测单价为2950.00元/公里，本包件预算金额为881.7480万元，合同总金额不超过本包件的预算金额。\n（2）合同总金额=（全野外探测单价×全野外探测实际提交长度）+（内外业结合核实探测单价×内外业结合核实探测实际提交长度），实际提交长度为入库合格后的全野外探测、内外业结合核实探测管线长度。合同总金额超出本包件的预算金额时按预算金额结算。\n（3）可直接利用的地下管线普查成果不计入经费计算。', '2021-10-26', NULL, NULL, '2', NULL, 7, '2021-10-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410860814863', 'HT2021C007', 'A164SG-21-01', '猴子岩水电站施工图设计阶段测绘技术服务合同', NULL, '0231', 40500.00, NULL, NULL, 22, '2021-01-25', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币40500.00元（大写：肆万零伍佰元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。', '2021-02-02', NULL, NULL, '2', NULL, 7, '2021-01-26', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410861585685', 'CMC1：A-23092', 'NZK21316-2023-CH02（补充）', '甘孜抽水蓄能电站规划加深阶段测绘技术服务合同补充协议', NULL, '0231', 32368.44, NULL, NULL, 22, '2022-12-22', '本补充协议暂定合同总价为人民币32368.44元（大写：人民币叁万贰仟叁佰陆拾捌元肆角肆分），其中：不含税价款为人民币30536.26元（大写：人民币叁万零伍佰叁拾陆元贰角陆分），适用增值税税率6%，税费为人民币1832.18元（大写：人民币壹仟捌佰叁拾贰元壹角捌分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-12-26', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410861985600', 'CMC2：G-23009', NULL, '普格县集体土地所有权登记成果更新汇交项目技术服务合同书', NULL, '0127', 1490000.00, NULL, NULL, 22, '2023-07-13', '合同总金额为 ￥1490000.00元整（大写：人民币壹佰肆拾玖万元整）。', NULL, NULL, NULL, '2', '已核', 7, '2023-07-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410862884037', 'HT2020W058', NULL, '新疆哈密抽水蓄能电站整体地形数据采集及建模技术服务合同', NULL, '0224', 1977366.00, NULL, NULL, 22, '2020-08-10', '技术服务报酬总额为：人民币（大写）壹佰玖拾柒万柒仟叁佰陆拾陆元（&yen;1977366.00）（含税）。其中，不含税价人民币（大写）壹佰捌拾陆万伍仟肆佰叁拾玖元陆角贰分（&yen;1865439.62），增值税税率6%,增值税税额111926.38元。当合同约定的税率与国家税法规定及税务机关认定的税率不一致时，以国家税法规定及税务机关认定的税率为准进行调整，调整时以不含税价为基准，执行国家法规规定及税务机关规定的税率。', '2020-10-12', NULL, NULL, '2', NULL, 7, '2020-08-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410866642195', 'CMC2：A-24012', NULL, '水口集团公司水口电站2024年大坝控制网复测服务', NULL, '0065', 333953.00, NULL, NULL, 22, '2024-05-31', '5.1技术服务报酬总额为：人民币（大写） 叁拾叁万叁仟玖佰伍拾叁元整  （&yen; 333953.00 ）（含税），其中，不含税价人民币 叁拾壹万伍仟零伍拾元整 （大写）（&yen; 315050.00 ），增值税税率 6 %，增值税税额 18903.00 元。当合同约定的税率与国家税法规定及税务机关认定的税率不一致时，以国家税法规定及税务机关认定的税率为准进行调整，调整时以不含税价为基准，执行国家法规规定及税务机关规定的税率。\n该报酬包含乙方履行本合同所需全部费用，包括但不限于员工工资、加班费、咨询费、资料费、交通费、食宿费以及税费等。', NULL, NULL, NULL, '2', NULL, NULL, '2024-05-31', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410871330251', 'HT2021C039', NULL, '贵州桐梓县假果山风电场地形图测绘技术服务合同', NULL, '0238', 183500.00, NULL, NULL, 22, '2021-09-06', '本合同总价为人民币183500元（含增值税，税率6%，不含税金额为173113.2075元）（大写：壹拾捌万叁仟伍佰元整），具体价格构成详见《项目经费组成表》（附件1）。本合同总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', '2021-09-06', NULL, NULL, '2', NULL, 7, '2021-09-08', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410877278518', 'CMC2：A-22021', '2022-9-001', '简阳市集体土地、农房及宅基地确权登记测绘服务测绘成果质量委托检验协议', NULL, '0168', 348713.00, NULL, NULL, 22, '2022-10-10', '检验经费总额为： 348713.00  元(大写： 叁拾肆万捌仟柒佰壹拾叁元整 )。\n乙方检出本项目测绘成果批不合格，需要返工后重新检验的,其二次检验经费按照本委托检验合同收费标准进行核算。', NULL, NULL, NULL, '2', NULL, NULL, '2022-10-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410878734337', 'CMC1：A-23061', 'A446KX-2023-CH01', '牙根一级水电站坝址下游河段清理整治及坐标转换测绘技术服务合同', NULL, '0231', 90312.17, NULL, NULL, 22, '2023-08-17', '本合同为总价承包计价方式，合同总金额为人民币￥90312.17元（大写：人民币玖万零叁佰壹拾贰元壹角柒分），其中：不含税价款为人民币85200.16元（大写：人民币捌万伍仟贰佰元壹角陆分），适用增值税税率6 %，税费为人民币5112.01元（大写：人民币伍仟壹佰壹拾贰元零壹分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410879477066', 'HT2020W004', 'PKS-XL-2020-001)', '深溪沟消力池及泄洪洞进出口水下检测及检查合同', NULL, '0077', 438508.00, NULL, NULL, 22, '2020-04-24', NULL, '2020-03-03', NULL, NULL, '2', NULL, 7, '2020-04-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410883138636', 'CMC2：A-22027', NULL, '重庆道路建模项目技术服务合同', NULL, '0019', 38000.00, NULL, NULL, 22, '2022-12-05', '本项目服务费用为人民币38000.00元（人民币：叁万捌仟元整）以上费用包干使用，即已包含作业费、税金、管理费等所有费用。', NULL, NULL, NULL, '2', '已核', 7, '2022-12-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410883917489', 'CMC2：A-24011', '202405YL-1', '南充家丰时装有限公司房产竣工测绘采购服务合同', NULL, '0117', 93519.81, NULL, NULL, 22, '2024-05-31', '第二条  服务费用\n1.依据：由国家测绘局颁布的《测绘工程产品价格》（国测财字[2002]3号），最终合同金额优惠完为93519.81元。', NULL, NULL, NULL, '2', NULL, NULL, '2024-05-31', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410887197715', 'HT2021W057', 'SGDDB-CH-001', '韶关市韶关大道北（西联隧道至移山路）断面提升改造工程测量测绘合同（竣工阶段）', NULL, '0152', 89268.38, NULL, NULL, 22, '2021-04-15', '收费依据：根据中介超市选取公示中服务金额说明确定合同价。合同价为：89,268.38元（大写：捌万玖仟贰佰陆拾捌元叁角捌分）。\n结算价按实际完成工作量乘以合同单价计算。结算价不得超合同价，若超合同价按合同价结算。', '2021-04-20', NULL, NULL, '2', NULL, 7, '2021-04-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410887847807', 'CMC2：A-23001', NULL, '测绘地理信息成果质量检验数据采集协作协议', NULL, '0161', 0.00, NULL, NULL, 22, '2022-12-05', '甲方根据项目需要，在本协议期限内，委托乙方安排专业人员协助完成测绘地理信息成果质量检验数据采集工作。\n1.2根据项目需要，确定本合同期限为2022年12月10日至2025年12月31日。\n1.3乙方根据甲方的需要，安排符合质检经验和条件的人员，并满足甲方的数量要求。\n1.4参与协作人员按1150元/人/天进行结算。本合同约定，合同签订后不预付经费，按季度项目结束经甲方按照本合同1.5条、1.12条确认后，进行结算。', NULL, NULL, NULL, '2', '已核', 7, '2022-12-07', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410890414687', 'HT2020W044', NULL, '保税港（水港、空港）片区市政消火栓核查测绘成图项目', NULL, '0267', 453900.00, NULL, NULL, 22, '2020-09-07', NULL, '2020-09-16', NULL, NULL, '2', NULL, 7, '2020-09-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410892891237', 'HT2021C029', 'A237ZB-21-02', '雅砻江孟底沟水电站招标阶段（深化设计）测绘技术服务合同', NULL, '0231', 92300.00, NULL, NULL, 22, '2021-06-15', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币大写：玖万贰仟叁佰元整（小写：92300.00元）。', '2021-06-22', NULL, NULL, '2', NULL, 7, '2021-06-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410898434330', 'HT2022W009', NULL, 'JX水电站征占林地审核审批服务合同', NULL, '0089', 365000.00, NULL, NULL, 22, '2022-01-20', '本项目合同总价为365000.00元（大写：叁拾陆万伍仟元整），其中不含税合同价为344339.62元，增值税税金为20660.38元（税率为6%）。合同执行期间，如遇法律法规或政策调整增值税税率，双方对未结算部分按不含税价不变的原则和调整后的税率办理结算。', '2022-02-23', NULL, NULL, '2', NULL, 7, '2022-01-21', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410903259030', 'HT2020C015', NULL, '黄金坪水电站长坝居民点引水线路、取水口地形图及章古山土地开发整理地形地类图测绘项目技术服务工作合同', NULL, '0227', 100000.00, NULL, NULL, 22, '2020-07-10', '本工程采用总价模式。乙方完成所有测绘工作的技术服务费（含增值税）总金额为人民币￥100000.00元（大写：人民币壹拾万元整）。', '2020-07-13', NULL, NULL, '2', NULL, 7, '2020-07-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410906027454', 'CMC1：A-23068', NULL, '奔戈光伏发电项目地形图测绘技术服务合同', NULL, '0238', 441394.00, NULL, NULL, 22, '2023-08-02', '本合同不含税价格为人民币416409.43元，适用增值税税率 6 %，税费为人民币24984.57元，故本合同总价为人民币441394元（大写：肆拾肆万壹仟叁佰玖拾肆元整）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410906269866', 'HT2020W036', NULL, '新建重庆至黔江铁路站前工程CQQJZQ-5标段精测网复测技术服务合同', NULL, '0263', 2799000.00, NULL, NULL, 22, '2020-09-04', '合同不含增值税暂定总价为：2640566元（大写：贰佰陆拾肆万零伍佰陆拾陆元（人民币），增值税税率 6 %，含增值税暂定总价为：2799000元（大写：贰佰柒拾玖万玖仟元（人民币）。暂定总价不作为结算依据，本合同最终结算总金额=经甲方签认的乙方实际完成的合格工作量×固定综合单价×（1+增值税税率6%）。', '2020-09-11', NULL, NULL, '2', NULL, 7, '2020-09-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410908090468', 'HT2021W044', NULL, '（广东）清城区粮食生产功能区调整补划项目', NULL, '0134', 57000.00, NULL, NULL, 22, '2021-09-20', '合同金额为（大写）：伍万柒仟元整（￥57000.00元）。', '2021-09-24', NULL, NULL, '2', NULL, 7, '2021-09-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410909582214', 'HT2022W031', NULL, '京山市新型基础测绘体系建设项目八标段', NULL, '0097', 1600000.00, NULL, NULL, 22, '2022-11-21', '1、双方确认，中标合同总金额：人民币￥1600000.00元（大写：壹佰陆拾万元整）。\n2、在乙方的测绘成果提交湖北省测绘质量监督检验站全部验收合格后交付甲方，甲方按市财政资金拨付进度予以支付，乙方应事先开具正式的税务发票提交给甲方。', NULL, NULL, NULL, '2', '已核', 7, '2022-11-21', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410910076058', 'HT2022W023', NULL, '乳源瑶族自治县新农村示范性综合楼建设项目沉降观测项目技术服务合同', NULL, '0140', 59198.53, NULL, NULL, 22, '2022-04-05', '建筑物沉降监测技术服务费（含税）共计：&yen; 59198.53元（人民币：伍万玖仟壹佰玖拾捌元伍角叁分）,详见沉降监测方案和报价清单。', '2022-05-06', NULL, NULL, '2', NULL, 7, '2022-04-07', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410911342315', 'HT2021C022', 'KYY-CQYCG-2021050', '重庆轨道交通4号线西延伸段工程施工监测及控制测量预采购合同协议', NULL, '0226', 7605000.00, NULL, NULL, 22, '2021-06-07', '本工程收费参照国家规定的收费标准，经甲乙双方友好协商，工程合同总价为本合同含税总价为人民币：7605000.00元（大写：柒佰陆拾万伍仟元整），其中增值税率为9%，税金为627935.78元（大写：陆拾贰万柒仟玖佰叁拾伍元柒角捌分）。', '2021-06-15', NULL, NULL, '2', NULL, 7, '2021-06-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410912288769', 'CMC1：A-23052', 'NZK21246-2023-CH01', '屏山抽水蓄能电站预可阶段补充测绘技术服务合同', NULL, '0231', 96444.23, NULL, NULL, 22, '2023-08-09', '本合同为总价承包计价方式，合同总金额为人民币￥96444.23 元（大写：人民币玖万陆仟肆佰肆拾肆元贰角叁分），其中：不含税价款为人民币90985.12元（大写：人民币玖万零玖佰捌拾伍元壹角贰分），适用增值税税率6 %，税费为人民币5459.11元（大写：人民币伍仟肆佰伍拾玖元壹角壹分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410914560063', 'CMC2：G-23001', NULL, '乳源瑶族自治县2022年度国土变更调查项目', NULL, '0143', 600000.00, NULL, NULL, 22, '2023-03-02', '合同金额：人民币600000.00元(大写：陆拾万元整，内外业包干、含税)。', NULL, NULL, NULL, '2', '已核', 7, '2023-03-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410921280755', 'HT2021C008', 'A237ZB-21-01', '雅砻江孟底沟水电站深化设计测绘技术服务合同', NULL, '0231', 64700.00, NULL, NULL, 22, '2021-01-26', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币64700.00   元（大写：陆万肆仟柒佰元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。', '2021-02-03', NULL, NULL, '2', NULL, 7, '2021-01-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410923839163', 'CMC2：G-22019', 'N5106822022000005', '大熊猫国家公园什邡片区勘界立标政府采购合同', NULL, '0153', 848000.00, NULL, NULL, 22, '2022-07-01', '该项目服务费用总额人民币大写：捌拾肆万捌仟元整，小写：￥848000.00元。', '2022-07-22', NULL, NULL, '2', NULL, 7, '2022-07-08', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410924523895', 'HT2020W048', 'A174SG-20-01', '大渡河双江口水电站测绘技术服务合同', NULL, '0231', 80100.00, NULL, NULL, 22, '2020-07-10', '本合同采用总价承包模式，总价为80100元。', '2020-07-16', NULL, NULL, '2', NULL, 7, '2020-09-21', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410929065985', 'CMC1：A-23055', NULL, '平昌抽水蓄能电站苟家河库址预可阶段测绘技术服务合同', NULL, '0231', 207763.39, NULL, NULL, 22, '2023-08-14', '本合同为总价承包计价方式，合同总金额为人民币￥207763.39 元（大写：人民币贰拾万零柒仟柒佰陆拾叁元叁角玖分），其中：不含税价款为人民币196003.20元（大写：人民币壹拾玖万陆仟零叁元贰角），适用增值税税率6 %，税费为人民币11760.19元（大写：人民币壹万壹仟柒佰陆拾元壹角玖分）。', NULL, NULL, NULL, '2', '同意', 7, '2023-08-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410929631852', 'CMC2：G-22030', 'NLLX-C02-2022-002', '西部沿海高速公路阳江南联络线（阳东至阳江港高速公路）工程项目地形图测绘', NULL, '0204', 1334453.00, NULL, NULL, 22, '2022-12-14', '暂定合同总价：人民币1334453元（大写人民币：壹佰叁拾叁万肆仟肆佰伍拾叁元整），工程总价款最终以实际工作量按合同单价进行结算。', NULL, NULL, NULL, '2', '同意办理', 7, '2022-12-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410933291569', 'HT2022W010', 'JX2022/S02', 'JX水电站征占草地审核审批服务合同', NULL, '0089', 366000.00, NULL, NULL, 22, '2022-01-20', '本项目合同总价为366000.00元（大写：叁拾陆万陆仟元整），其中不含税合同价为345283.02元，增值税税金为20716.98元（税率为6%）。合同执行期间，如遇法律法规或政策调整增值税税率，双方对未结算部分按不含税价不变的原则和调整后的税率办理结算。', '2022-02-23', NULL, NULL, '2', NULL, 7, '2022-01-21', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410934959316', 'CMC1：A-24016', NULL, '孟底沟水电站水库淹没区木里县境内人行驿道地形图测绘技术服务合同', NULL, '0227', 90000.00, NULL, NULL, 22, '2024-04-05', '本合同为单价合同，暂定合同总价为人民币90000.00元（大写：玖万元整），其中：不含税价款为人民币84905.66元（大写捌万肆仟玖佰零伍元陆角陆分），适用增值税税率 6 %，税费为人民币 5049.34元（大写 伍仟零肆拾玖元叁角肆分）。', NULL, NULL, NULL, '2', '已核', 7, '2024-04-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410942099989', 'HT2021W010', '5101832021000020', '邛崃市地下管线普查成果更新探测服务项目合同', NULL, '0136', 2000000.00, NULL, NULL, 22, '2021-03-03', '6.1合同价款\n（1）本合同为单价合同，全野外探测单价为 2375.00 元/公里，内外业结合核实探测单价为   870.00   元/公里，预算金额为200万元，合同总金额不超过预算金额。\n（2）合同总金额=（全野外探测单价×全野外探测实际提交长度）+（内外业结合核实探测单价×内外业结合核实探测实际提交长度），实际提交长度为入库合格后的全野外探测、内外业结合核实探测管线长度，若数据库成果中的内外业结合核实探测数量大于采购文件中相应规定的数量的，按数据库成果相应数量进行结算；数据库成果中的内外业结合核实探测数量小于或等于采购文件中相应规定的数量的，按采购文件相应规定的数量进行结算。合同总金额超出本包件的预算金额时按预算金额结算。\n（3）可直接利用的地下管线普查成果不计入经费计算。', '2021-03-15', NULL, NULL, '2', NULL, 7, '2020-03-04', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410942593459', 'HT2021W054', NULL, '2021年清远市清新区耕地质量等级调查和农作物施肥情况调查工作协议书', NULL, '0135', 67000.00, NULL, NULL, 22, '2021-11-08', '人民币陆万柒千元整（￥67000.00元），项目服务费主要用于相关劳务费、差旅费、交通费、印刷费、技术培训费等。', '2021-11-12', NULL, NULL, '2', NULL, 7, '2021-11-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410942904590', 'CMC2：A20004', NULL, '邻水县小西河、柑子铺河、观音河、甘坝河、桥坝河、大湾河、九龙河、大石河等8条县级河流岸线划定采购项目', NULL, '0107', 3198000.00, NULL, NULL, 22, '2020-03-17', '我公司已按合同约定交纳人民币319800.00元作为本合同的履约保证金。', '2020-02-07', NULL, NULL, '2', NULL, 9, '2020-04-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410944366976', 'CMC2：A-22002', 'XXY-WT-2022-003', '盐津关河林家渡、横江马岭岩段河道治理工程初步设计阶段详查工作技术软服务项目外委合同', NULL, '0241', 207000.00, NULL, NULL, 22, '2022-01-10', ' 5.1本合同金额暂定为:人民币207000元(大写:贰拾万柒仟元整)。合同价格已包括应由乙方承担的直接工程费、间接费、材料费、利润、管理费、税金以及应由承包人承担的义务、责任和风险所发生的一切费用。', NULL, NULL, NULL, '0', '已阅', 7, '2023-07-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410944784475', 'CMC1：A-24013', 'NZK22222-05', '新华电力发电有限公司博州10万千瓦储热型光热配件90万千瓦新能源项目勘测定界、土地预审与选址意见书办理技', NULL, '0238', 1350000.00, NULL, NULL, 22, '2024-03-12', '本合同为单价合同，暂定合同总价为人民币 1350000.00 元（大写 壹佰叁拾伍万元），其中：不含税价款为人民币 1273584.91 元（大写 壹佰贰拾柒万叁仟伍佰捌拾肆元玖角壹分 ），适用增值税税率 6 %，税费为人民币 76415.09 元（大写壹分 柒万陆仟肆佰壹拾伍元玖分 ）。', NULL, NULL, NULL, '2', '已核', 7, '2024-03-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410945843202', 'CMC1：A-23049', 'A238KX-2023-CH01', '楞古水电站可研阶段测绘技术服务合同', NULL, '0231', 1445099.48, NULL, NULL, 22, '2023-08-01', '本合同为总价承包计价方式，合同总金额为人民币￥1445099.48元（大写：人民币壹佰肆拾肆万伍仟零玖拾玖元肆角捌分），其中：不含税价款为人民币1363301.40元（大写：人民币壹佰叁拾陆万叁仟叁佰零壹元肆角），适用增值税税率6 %，税费为人民币81798.08元（大写：人民币捌万壹仟柒佰玖拾捌元零捌分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410948033623', 'HT2022W026', NULL, '新建田师府至桓仁铁路DK69+125—DK69+352岩堆区域加固防护安全监测技术服务合同', NULL, '0255', 2180000.00, NULL, NULL, 22, '2022-05-20', '3.1 合同价款：人民币（大写）贰佰壹拾捌万元整（￥2180000元），税率为百分之六(6%)，不含税价为：2056604元，税金为：123396元。\n第八条 付款方式\n8.1本合同签订后，根据乙方实际完成的工作量，每半年进行一次验工计价和拨款；\n8.2拨款时乙方需提供税率6%的增值税专用发票；\n8.3甲方有权根据实际情况，对上述拨款额度进行调整。', '2022-05-30', NULL, NULL, '2', NULL, 7, '2022-05-20', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410952933694', 'HT2020W014', NULL, '关于编制《四川省五大经济区旅游产品发展方向及旅游资源开发条件评价研究》的合作协议', NULL, '0166', 432000.00, NULL, NULL, 22, '2020-06-01', '（一）本项目总经费共计人民币43.2万元（大写：肆拾叁万贰仟元整）。\n（二）项目经费包括但不限于与课题有关的成本费用支出，具体包括：\n1.编制过程中的文本制作成本等。\n2.课题组成员劳务成本及应交的个人所得税。\n3.课题组成员调研费用。\n4.其他应由乙方承担的费用。', '2020-07-07', NULL, NULL, '2', NULL, 7, '2020-06-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410960592700', 'CMC2：A-24010', 'SZYBH-KYY-Z2024049', '雅砻江、大渡河重要栖息地河段地形监测合同', NULL, '0091', 182000.00, NULL, NULL, 22, '2024-05-31', '第二条 工程价款及支付方式\n1、本合同费用采用总价承接方式，含税价格为&yen;182000.00元（人民币大写：壹拾捌万贰仟元整），适用增值税税率为6%。\n2、服务费包含完成协作工作的全部费用。乙方必须按服务费组成及项目要求，合理安排使用服务费。', NULL, NULL, NULL, '2', NULL, NULL, '2024-05-31', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410962620417', 'CMC1：A-23038', NULL, '芦山抽水蓄能电站可研阶段测绘技术服务合同', NULL, '0231', 370861.88, NULL, NULL, 22, '2023-07-28', '本合同为总价承包计价方式，合同总金额为人民币￥370861.88元（大写：人民币叁拾柒万零捌佰陆拾壹元捌角捌分），其中：不含税价款为人民币349869.70元（大写：人民币叁拾肆万玖仟捌佰陆拾玖元柒角），适用增值税税率6 %，税费为人民币20992.18元（大写：人民币贰万零玖佰玖拾贰元壹角捌分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-07-31', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410962635508', 'HT2021W004', '5133202021000004', '甘孜州2020年河长制水生态保护河湖（19条州级河流及125个常年湖面面积1km²以下湖泊）管理范围划定项目技术', NULL, '0068', 7230000.00, NULL, NULL, 22, '2021-03-05', '1、合同含税总价为人民币大写：柒佰贰拾叁万元整，即RMB￥7230000.00元；该合同总价已包括完成本合同内容所需的一切相关费用。本合同履行期间合同总价不变，甲方无须另向乙方支付本合同规定之外的其他任何费用。\n2、履约保证金：\n2.1、乙方交纳人民币 大写：叁拾陆万壹仟伍佰元整，小写&yen;361500.00元作为本合同的履约保证金。合同履约保证金可以采用银行转账、专票、汇票、本票、银行或担保机构出具的保函提交。（本项目我公司办理了履约担保保函）', '2021-02-26', NULL, NULL, '2', NULL, 7, '2021-03-08', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410963115554', 'HT2020W020', NULL, '简阳市50平方公里及以上河湖划界项目政府采购合同', NULL, '0095', 7850000.00, NULL, NULL, 22, '2020-08-12', '1.本合同不收取履约保证金。', '2020-08-17', NULL, NULL, '2', NULL, 7, '2020-08-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410970220958', 'CMC2：A-23014', NULL, '仪陇县多测合一采购服务合同（电力器材生产加工厂区建设项目）', NULL, '0167', 100685.90, NULL, NULL, 22, '2023-06-26', '计费依据：由国家测绘局颁布的《测绘工程产品价格》（国测财字[2002]3号），最终合同金额优惠完为100685.9元', NULL, NULL, NULL, '2', '已核', 7, '2023-06-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410970356648', 'HT2020C008', NULL, '天星坝水库输水工程可行性研究及初步设计阶段地形地类图测量技术服务合同', NULL, '0227', 950000.00, NULL, NULL, 22, '2020-07-02', '乙方按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，乙方承诺将无偿处理。本合同不扣减质量保证金。', '2020-07-08', NULL, NULL, '2', NULL, 7, '2020-07-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410970475344', 'HT2021C026', 'NZK183-21-01', '雅砻江桐子林水电站电力生产项目设计后续服务测绘技术服务合同', NULL, '0231', 163700.00, NULL, NULL, 22, '2021-06-11', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币大写：壹拾陆万叁仟柒佰元整（小写：163700.00元）。', '2021-06-21', NULL, NULL, '2', NULL, 7, '2021-06-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410971979181', 'HT2021W028', NULL, '喜德县自然资源局存量林权登记数据整合项目合同', NULL, '0198', 2716000.00, NULL, NULL, 22, '2021-05-26', '喜德县自然资源局存量林权登记数据整合项目合同总价为人民币&yen;271.60 万元（大写：贰佰柒拾壹万陆仟元整）。', '2021-06-02', NULL, NULL, '2', NULL, 7, '2021-05-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410972336941', 'HT2020W073', '5118212020000077-BC01', '雅安市名山区水利局河流河道管理范围划界项目补充协议', NULL, '0199', 33400.00, NULL, NULL, 22, '2020-10-20', '本补充协议为单价合同，预估总价为￥33400.00元（大写：人民币叁万叁仟肆佰元整）。\n合同签订后，乙方划界工作完成后，甲方一次性支付乙方全部工作费用，计￥33400.00元（大写：人民币叁万叁仟肆佰元整）。同时乙方向甲方提交所有成果资料。', '2020-11-02', NULL, NULL, '2', NULL, 7, '2020-10-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410974125570', 'CMC1：A-24018', 'CD2C20241560', '大熊猫国家公园芦山片区保护设施恢复重建项目新增点位补测服务合同', NULL, '0227', 96961.00, NULL, NULL, 22, '2024-04-12', '本合同为单价合同，暂定合同总价为人民币96961.00元（大写人民币玖万陆仟玖佰陆拾壹元整），其中：不含税价款为人民币91472.64元（大写人民币玖万壹仟肆佰柒拾贰元陆角肆分），适用增值税税率 6 %，税费为人民币5488.36元（大写人民币伍仟肆佰捌拾捌元叁角陆分）。增值税税额如遇国家有关税收规定调整做相应调整。本合同包括乙方提供本合同范围内所有技术工作及相关咨询服务所需的全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2024-04-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410975262974', 'HT2021W061', NULL, '仁怀市北部新城-南部新城片区航飞影像及1：500地形图测绘空三加密、影像图及数据编辑技术服务协议书', NULL, '0247', 1401800.40, NULL, NULL, 22, '2021-11-18', '五、协议价格\n1、仁怀市北部新城-南部新城片区航飞影像及1：500地形图测绘空三加密、影像图及数据编辑技术服务项目费用为人民币：&yen;1401800.40元（大写：壹佰肆拾万壹仟捌佰元零肆角）。\n2、费用为包干价，包括：人工费、差旅费、住宿费、消耗性材料费、利润、税金等一切费用。', '2021-11-23', NULL, NULL, '2', NULL, 7, '2021-11-19', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410979397634', 'CMC2：A-23019', '2023工字026号', '青羊区建管并举文旅线路风貌提升改造项目测量工程合同', NULL, '0018', 189000.00, NULL, NULL, 22, '2023-02-24', '第四条：合同价款及支付方式\n1.本合同测绘工程固定建筑立面测绘单价为1.43元/m²，地形图测绘单价为0.29元/m²；最终结算时按测绘成果实际测绘面积与固定单价进行结算，若最终成果中测绘面积大于清单暂定面积（建筑立面测绘：120000.00m²，地形图测绘：60000.00m²），结算时按清单暂定面积进行计算。\n2.本合同含税暂定总价为：&yen;189000.00 元（大写：人民币 壹拾捌万玖仟元整）。', NULL, NULL, NULL, '2', '已核', 7, '2023-02-26', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410980290951', 'HT2020W053', '20200622', '金沙江金沙水电站长坝工程安全监测施工期安全监测工程分包合同', NULL, '0217', 671900.00, NULL, NULL, 22, '2020-06-10', '1、本合同为单价承包合同，工程含税总额：￥671900.00 元(大写 ；陆拾柒万壹仟玖佰元整)(乙方应缴纳的各种税、费均己全部包含在本合同价款中)。\n2、合同承包方式：本项目采用单价承包方式。本分包合同单价包含了乙方完成合同工作内容所需的人工费、其他直接费、现场经费、间接费、企业利润、安全文明施工费及其他所有措施费、保险费、临时工程摊销费和其他费用摊销等全部费用，以及应由乙方承担的税金(含增值税、城市建设维护税、教育费附加、地方教育费及其他应由乙方承担的税费等)、所有规费 、风险、义务、责任和条款中不单独列项而为本工程施工所发生的一切费用。\n3、本工程的职业健康、文明施工、施工期环保、水保、安全文明生产措施 、 施工辅助设施、承包人进退场等专项措施费用项目由乙方承担，费用己包含在本分包合同中，甲方不予以另行支付。', '2020-06-22', NULL, NULL, '2', NULL, 7, '2020-06-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410983497326', 'HT2020W012', NULL, '大方县星宿乡农村不动产测绘项目服务合同', NULL, '0035', 1320000.00, NULL, NULL, 22, '2020-05-11', NULL, '2020-05-15', NULL, NULL, '2', NULL, 7, '2020-05-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410984908632', 'HT2020C001', NULL, '两河口水电站移民项目阿宗汽车便道等地形图测绘技术服务工作合同', NULL, '0226', 300545.00, NULL, NULL, 22, '2020-04-17', NULL, '2020-04-17', NULL, NULL, '2', NULL, 7, '2020-05-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410985319268', 'CMC1：A-24009', NULL, '成雅工业园区百丈安置房二期地形图及房屋面积测绘服务合同', NULL, '0227', 103032.00, NULL, NULL, 22, '2024-01-11', '本合同含增值税合同总价为人民币(大写)【壹拾万零参仟零参 拾贰元整】(&yen;【103032.00】元),税率为6%,其中：增值税额为： 人民币(大写)【伍仟捌佰参拾贰元整】(&yen;【5832.00】元),不含增值税总价为：人民币(大写)【玖万柒仟贰佰元整】(&yen;【97200.00】元);此价格为一口价，不再进行调整。', NULL, NULL, NULL, '2', '已核', 7, '2024-01-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410988637056', 'HT2020W065', NULL, '佛山市季华路西延线工程（南海段）项目测量工程地籍及房产测绘工程合同', NULL, '0054', 0.00, NULL, NULL, 22, '2020-09-10', '2．取费项目及工程总价款：《南海区重点基础设施建设征地拆迁测绘服务采购项目合同》。\n序号	测绘内容	国家收费标准价格（元）	\n1	房屋及附属设施面积/长度测量	2.04元/m²/m		\n2	管线测量	8119.00元/㎞		\n3	地形图测绘	0.27元/m²		\n4	界址点放样	648.5元/点', '2020-09-30', NULL, NULL, '2', NULL, 7, '2020-09-14', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410989418161', 'HT2022W003', NULL, '祥云财富工业园区有色金属循环产业园（一期）工程规划一路、规划二路勘察设计施工总承包（EPC)地形图测量劳', NULL, '0215', 65970.00, NULL, NULL, 22, '2021-12-01', '5.1.2本项目含增值税合同价款为：【65970.00】 元（大写：【陆万伍仟玖佰柒拾】）元。其中，不含增值税税额价款 【62235.85】元，税率/征收率 【6%】 ，增值税税额为 【3734.15】 元。该费用包含乙方应完成本合同全部工作的全部费用；除双方另有约定外，乙方履行本合同项下全部义务，甲方不再向乙方支付其他任何费用。', '2021-12-03', NULL, NULL, '2', '已核', 7, '2021-12-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410990960316', 'CMC2：G-22025', NULL, '乳源县天然气管道及配套设施建设项目地下管线普查项目测绘合同', NULL, '0139', 355000.00, NULL, NULL, 22, '2022-08-15', '本项目测绘费用为总合同费用，合同金额为&yen;355000.00元（大写：叁拾伍万伍仟元整）。', NULL, NULL, NULL, '2', NULL, 7, '2022-08-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410997134774', 'HT2021W011', NULL, '乳源县鹰峰路两侧楼宇及道路照明项目测绘合同', NULL, '0141', 25860.00, NULL, NULL, 22, '2020-12-07', '根据国家测绘局《测绘工程产品价格》（国测财字[2002]3号计算：15839.29×2.72=4.31万元，再打6折，合同包干总费用为小写：25860.00元；大写：贰万伍仟捌佰陆拾元整。', '2021-03-23', NULL, NULL, '2', NULL, 7, '2021-03-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881410997496056', 'HT2020W033', NULL, '青川县重点区域自然资源权属调查（大熊猫国家公园）项目合同书', NULL, '0129', 248000.00, NULL, NULL, 22, '2020-04-27', '乙方在签订合同前需缴纳履约保证金12300.00元整（大写：壹万贰仟叁佰元整），若乙方未按约缴纳履约保证金的，则甲、乙双方所签合同无效。履约保证金在成果经国家验收合格后10日内无息退还。', '2020-06-01', NULL, NULL, '2', NULL, 7, '2020-04-29', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411000369153', 'HT2023C002', 'A510KX-2023-CH01', 'YJ电站可研阶段测绘技术服务合同', NULL, '0231', 188604.53, NULL, NULL, 22, '2023-07-06', '本合同为总价承包计价方式，合同总金额为人民币￥188604.53元（大写：人民币壹拾捌万捌仟陆佰零肆元伍角叁分），其中：不含税价款为人民币177929.30元（大写：人民币壹拾柒万柒仟玖佰贰拾玖元叁角），适用增值税税率6 %，税费为人民币10675.23 元（大写：人民币壹万零陆佰柒拾伍元贰角叁分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-07-07', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411050700802', 'CMC1：A-23041', NULL, '大渡河流域扩机规划地形图测绘技术服务合同', NULL, '0231', 231579.81, NULL, NULL, 22, '2023-06-30', '本合同为总价承包计价方式，合同总金额为人民币￥231579.81元（大写：人民币贰拾叁万壹仟伍佰柒拾玖元捌角壹分），其中：不含税价款为人民币218471.52元（大写：人民币贰拾壹万捌仟肆佰柒拾壹元伍角贰分），适用增值税税率6 %，税费为人民币13108.29元（大写：人民币壹万叁仟壹佰零捌元贰角玖分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-06-30', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411067478017', 'CMC1：A-23030', 'CD2C20230682', '雅砻江两河口水电站水库泥沙监测系统工程测量工程合同', NULL, '0232', 1798150.00, NULL, NULL, 22, '2023-05-06', '本合同为总价合同，暂定合同总价为人民币1798150.00元（大写壹佰柒拾玖万捌仟壹佰伍拾元），其中：不含税价款为人民币 1696367.92元（大写壹佰陆拾玖万陆仟叁佰陆拾柒元玖角贰分），适用增值税税率6%，税费为人民币101782.08元（大写 壹拾万零壹仟柒佰捌拾贰元零捌分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-05-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411105226753', 'CMC1：A-23039', NULL, '洪雅抽水蓄能电站预可阶段测绘技术服务合同', NULL, '0231', 229838.25, NULL, NULL, 22, '2023-06-13', '本合同为总价承包计价方式，合同总金额为人民币￥229838.25元（大写：人民币贰拾贰万玖仟捌佰叁拾捌元贰角伍分），其中：不含税价款为人民币216828.54元（大写：人民币贰拾壹万陆仟捌佰贰拾捌元伍角肆分），适用增值税税率6 %，税费为人民币13009.71元（大写：人民币壹万叁仟零玖元柒角壹分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-07-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411122003970', 'CMC1：A-23035', 'NZK22298-2023-CH01', '着巴抽水蓄能电站规划加深阶段测绘技术服务合同', NULL, '0231', 248870.62, NULL, NULL, 22, '2023-05-19', '本合同为总价承包计价方式，合同总金额为人民币￥248870.62元（大写：人民币贰拾肆万捌仟捌佰柒拾元陆角贰分），其中：不含税价款为人民币234783.60元（大写：人民币贰拾叁万肆仟柒佰捌拾叁元陆角），适用增值税税率6 %，税费为人民币14087.02元（大写：人民币壹万肆仟零捌拾柒元零贰分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-05-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411138781186', 'CMC1：A-23056', 'NZK22297-2023-CH01', '德登抽水蓄能电站规划加深阶段测绘技术服务合同', NULL, '0231', 392518.85, NULL, NULL, 22, '2023-08-14', '本合同为总价承包计价方式，合同总金额为人民币￥392518.85元（大写：人民币叁拾玖万贰仟伍佰壹拾捌元捌角伍分），其中：不含税价款为人民币370300.80元（大写：人民币叁拾柒万零叁佰元捌角），适用增值税税率6 %，税费为人民币22218.05元（大写：人民币贰万贰仟贰佰壹拾捌元零伍分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411138781188', 'CMC1：A-24010', NULL, 'ML水电站可研阶段河道测绘技术服务合同', NULL, '0231', 436920.13, NULL, NULL, 22, '2024-03-07', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币436920.13（大写：人民币肆拾叁万陆仟玖佰贰拾元壹角叁分），其中：不含税价款为人民币412188.80元（大写：肆拾壹万贰仟壹佰捌拾捌元捌角），适用增值税税率6 %，税费为人民币24731.33元（大写：人民币贰万肆仟柒佰叁拾壹元叁角叁分）。', NULL, NULL, NULL, '2', '已核', 7, '2024-03-08', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411138781190', 'CMC1：A-24004', 'KSLSXM22-26-2023-1', '卡瓦白庆抽水蓄能电站预可阶段测绘技术服务合同', NULL, '0231', 340037.40, NULL, NULL, 22, '2023-12-28', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥340037.40元（大写：人民币叁拾肆万零叁拾柒元肆角），其中：不含税价款为人民币320790.00元（大写：人民币叁拾贰万零柒佰玖拾元整），适用增值税税率6 %，税费为人民币19247.40元（大写：人民币壹万玖仟贰佰肆拾柒元肆角）。', NULL, NULL, NULL, '2', '已核', 7, '2023-12-29', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411159752705', 'CMC1：A-23031', 'A237SG-2023-CH01', '孟底沟水电站技施阶段测绘技术服务合同', NULL, '0231', 79000.00, NULL, NULL, 22, '2023-05-10', '本合同为总价承包计价方式，合同总金额为人民币￥79000.00元（大写：人民币柒万玖仟元整），其中：不含税价款为人民币74528.3元（大写：人民币柒万肆仟伍佰贰拾捌元叁角），适用增值税税率6 %，税费为人民币4471.70元（大写：人民币肆仟肆佰柒拾壹元柒角）。', NULL, NULL, NULL, '2', '已核', 7, '2023-05-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411201695745', 'CMC1：A-23034', 'KSLSXM22-42-2023-CH01', '得荣抽水蓄能电站预可阶段测绘技术服务合同', NULL, '0231', 368064.65, NULL, NULL, 22, '2023-05-19', '本合同为总价承包计价方式，合同总金额为人民币￥368064.65元（大写：人民币叁拾陆万捌仟零陆拾肆元陆角伍分），其中：不含税价款为人民币347230.80元（大写：人民币叁拾肆万柒仟贰佰叁拾元捌角），适用增值税税率6 %，税费为人民币20833.85元（大写：人民币贰万零捌佰叁拾叁元捌角伍分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-05-19', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411218472961', 'CMC1：A-23036', NULL, '山西沁水抽水蓄能电站可研阶段补充测绘技术服务合同', NULL, '0231', 51740.84, NULL, NULL, 22, '2023-05-23', '本合同为总价承包计价方式，合同总金额为人民币￥51740.84元（大写：人民币伍万壹仟柒佰肆拾元捌角肆分），其中：不含税价款为人民币48812.11元（大写：人民币肆万捌仟捌佰壹拾贰元壹角壹分），适用增值税税率6 %，税费为人民币2928.73元（大写：人民币贰仟玖佰贰拾捌元柒角叁分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-05-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411235250178', 'CMC1：A-23044', NULL, 'ML水库电站建设征地实物指标土地调查测量技术服务合同', NULL, '0227', 8610000.00, NULL, NULL, 22, '2023-06-30', '本合同不含税价格为人民币8122641.51元（大写：捌佰壹拾贰万贰仟陆佰肆拾壹元伍角壹分），适用增值税税率6%，税费为人民币487358.49元（大写：肆拾捌万柒仟叁佰伍拾捌元肆角玖分），故本合同含税总价为人民币8610000.00元（大写：捌佰陆拾壹万元整）。本合同不含税总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2023-07-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411252027394', 'CMC1：A-23028', 'NZK21247-2023-CH01', '南江抽水蓄能电站预可阶段测绘技术服务合同', NULL, '0231', 160039.71, NULL, NULL, 22, '2023-05-04', '本合同为总价承包计价方式，合同总金额为人民币￥160039.71元（大写：人民币壹拾陆万零叁拾玖元柒角壹分），其中：不含税价款为人民币150980.86元（大写：人民币壹拾伍万捌仟玖佰捌拾元捌角陆分），适用增值税税率6 %，税费为人民币9058.85元（大写：人民币玖仟零伍拾捌元捌角伍分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-05-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411331719170', 'CMC2：A-21031', NULL, '雅砻江二滩水电站2022~2026年度大坝外部变形和近坝区滑坡稳定性监测合同文件', NULL, '0200', 10379580.00, NULL, NULL, 22, '2021-11-01', '1.合同总金额为人民币（大写）壹仟零叁拾柒万玖仟伍佰捌拾元整（￥10,379,580.0元）。\n2.本合同工期为：2023年1月1日至2026年12月31日。\n4.2.1履约保证金形式承包人应按本招标文件规定的内容和格式在合同签订前或签订的同时，按本合同约定向发包人提交履约保证金，最迟必须在合同首次付款前提交履约保证金的形式：银行保函或现金或履约保证保险履约保证金金额：签约合同价×2%\n（1）保函担保应符合招标文件第四章“合同条款和格式”规定的履约保证金格式要求。发包人只接受中国银行、中国建设银行、中国工商银行、中国农业银行或交通银行支行及以上分支机构或者发包人认可的其他银行出具的保函。\n（2）现金担保，承包人应对公转账至发包人以下账户，担保金在履约保证期满后，发包人按照合同约定扣除相关违约或赔偿金后无息返还给承包人。\n户名：雅砻江流域水电开发有限公司\n账号：4083079810001\n开户行：招商银行成都市玉双路支行\n（3）履约保证保险应符合招标文件第四章“合同条款和格式”规定的履约保证金格式要求。发包人只接受在四川省设有分支机构且能提供履约保证金保证业务的四川分公司或者发包人认可的其他保险公司出具的履约保证保险。4.2.2履约保证金的有效', '2021-11-08', NULL, NULL, '2', NULL, 7, '2021-11-04', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411373662209', 'HT2021W046', NULL, '雅砻江桐子林水电站水库泥沙断面测量合同文件（2021-2023）', NULL, '0202', 296320.00, NULL, NULL, 22, '2021-10-12', '二、合同主要工作内容\n（1）断面基点复测及维护：包括82个断面基点的平面及高程复测，损坏的断面基点或断面标志恢复，断面标志重新刷漆等。\n（2）断面测量及淤积分析：包括41条断面的测量，水库库容计算，泥沙淤积对比分析等。', '2021-10-14', NULL, NULL, '2', NULL, 7, '2021-10-14', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411457548290', 'CMC1：A-23027', 'NZK21272-2023-CH01', '江油抽水蓄能电站可研阶段测绘技术服务合同', NULL, '0231', 340763.50, NULL, NULL, 22, '2023-05-05', '本合同为总价承包计价方式，合同总金额为人民币￥340763.50元（大写：人民币叁拾肆万零柒佰陆拾叁元伍角），其中：不含税价款为人民币321475.00元（大写：人民币叁拾贰万壹仟肆佰柒拾伍元整），适用增值税税率6 %，税费为人民币19288.50元（大写：人民币壹万玖仟贰佰捌拾捌元伍角）。', NULL, NULL, NULL, '2', '已核', 7, '2023-05-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491330', 'CMC1：A-24011', 'A117SG-2024-CH01', '两河口库区桥梁断面测绘技术服务合同', NULL, '0231', 64298.75, NULL, NULL, 22, '2024-03-11', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥64298.75元（大写：人民币陆万肆仟贰佰玖拾捌元柒角伍分），其中：不含税价款为人民币60659.20元（大写：人民币陆万零陆佰伍拾玖元贰角），适用增值税税率6 %，税费为人民币3639.55元（大写：人民币叁仟陆佰叁拾玖元伍角伍分）。', NULL, NULL, NULL, '2', '已核', 7, '2024-03-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491336', 'HT2024C001', 'KSLSXM23-04-2023-CH3（补充）', '新龙抽水蓄能电站规划加深阶段测绘技术服务合同补充协议', NULL, '0231', 248027.28, NULL, NULL, 22, '2023-12-28', '本补充协议暂定合同总价为人民币248027.28元（大写：人民币贰拾肆万捌仟零贰拾柒元贰角捌分），其中：不含税价款为人民币233988.00元（大写：人民币贰拾叁万叁仟玖佰捌拾捌元整），适用增值税税率6%，税费为人民币14039.28元（大写：人民币壹万肆仟零叁拾玖元贰角捌分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-12-29', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491337', 'CMC1：A-23081', NULL, 'ABH项目预可阶段测绘技术服务合同', NULL, '0231', 54972.00, NULL, NULL, 22, '2023-11-06', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, '2', '已核', 7, '2023-11-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491341', 'CMC1：A-24001', 'NZK21217-2023-3', '大邑抽水蓄能电站可研阶段测绘技术服务合同', NULL, '0231', 319696.78, NULL, NULL, 22, '2023-12-25', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥319696.78元（大写：人民币叁拾壹万玖仟陆佰玖拾陆元柒角捌分），其中：不含税价款为人民币301600.74元（大写：人民币叁拾万零壹仟陆佰元柒角肆分），适用增值税税率6 %，税费为人民币18096.04元（大写：人民币壹万捌仟零玖拾陆元零肆分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-12-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491344', 'CMC1：A-23090', 'PA2232-蓬安-2023-01', '四川南充蓬安抽水蓄能电站预可研阶段测绘技术服务合同', NULL, '0231', 132049.88, NULL, NULL, 22, '2023-12-13', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥132049.88元（大写：人民币壹拾叁万贰仟零肆拾玖元捌角捌分），其中：不含税价款为人民币120927.08元（大写：人民币壹拾贰万零玖佰贰拾柒元捌分），适用增值税税率6 %，税费为人民币11122.80元（大写：人民币壹万壹仟壹佰贰拾贰元捌角）。', NULL, NULL, NULL, '2', '已核', 7, '2023-12-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491345', 'CMC1：A-23091', 'PA2232-岳池-2023-01', '四川广安岳池抽水蓄能电站项目预可研阶段测绘技术服务合同', NULL, '0231', 75047.66, NULL, NULL, 22, '2023-12-13', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥75047.66元（大写：人民币柒万伍仟零肆拾柒元陆角陆分），其中：不含税价款为人民币70799.68元（大写：人民币柒万零柒佰玖拾玖元陆角捌分），适用增值税税率6 %，税费为人民币4247.98元（大写：人民币肆仟贰佰肆拾柒元玖角捌分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-12-14', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491347', 'CMC1：A-24003', 'NZK23006-2023-CH01', '宜宾市叙州区抽水蓄能电站预可阶段测绘技术服务合同', NULL, '0231', 141096.60, NULL, NULL, 22, '2023-12-27', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币141096.60元（大写：人民币壹拾肆万壹仟零玖拾陆元陆角），其中：不含税价款为人民币133110.00元（大写：人民币壹拾叁万叁仟壹佰壹拾元整），适用增值税税率6 %，税费为人民币7986.60 元（大写：人民币柒仟玖佰捌拾陆元陆角）。', NULL, NULL, NULL, '2', '已核', 7, '2023-12-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491348', 'CMC1：A-24008', 'CD2C20241090', '乡城县正斗场址100万千瓦光伏项目地形图测绘技术服务合同', NULL, '0238', 299200.00, NULL, NULL, 22, '2024-01-19', '本合同不含税 价格为人民币282264.15元，适用增值税税率 6 %，税费为人民币16935.85元，故本合同总价为人民币299200.00 元（大写：贰拾玖万玖仟贰佰元整）。\n本合同总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2024-01-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491349', 'CMC1：A-24002', 'NZK23255-2023-CH01', '安徽西形冲抽水蓄能电站可研阶段测绘技术服务合同', NULL, '0231', 1070189.57, NULL, NULL, 22, '2023-12-27', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥1070189.57（大写：人民币壹佰零柒万零壹佰捌拾玖元伍角柒分），其中：不含税价款为人民币1009612.80元（大写：人民币壹佰万零玖仟陆佰壹拾贰元捌角），适用增值税税率6 %，税费为人民币60576.77元（大写：人民币陆万零伍佰柒拾陆元柒角柒分）。', NULL, NULL, NULL, '2', '同意', 7, '2023-12-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491350', 'CMC1：A-24006', 'P2232-2023-CH02（补充）', '雅江抽蓄电站规划阶段测绘技术服务合同补充协议', NULL, '0231', 152830.16, NULL, NULL, 22, '2024-01-04', '本补充协议暂定合同总价为人民币152830.16元（大写：人民币壹拾伍万贰仟捌佰叁拾元壹角陆分），其中：不含税价款为人民币144179.40元（大写：人民币壹拾肆万肆仟壹佰柒拾玖元肆角），适用增值税税率6%，税费为人民币8650.76元（大写：人民币捌仟陆佰伍拾元柒角陆分）。', NULL, NULL, NULL, '2', '已核', 7, '2024-02-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491351', 'CMC1：A-23088', 'NZK23123-2023-01', '双江口混合式抽水蓄能电站测绘技术服务合同', NULL, '0231', 96099.60, NULL, NULL, 22, '2023-12-01', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥96099.60元（大写：人民币玖万陆仟零玖拾玖元陆角），其中：不含税价款为人民币90660.00元（大写：人民币玖万零陆佰陆拾元整），适用增值税税率6 %，税费为人民币5439.60元（大写：人民币伍仟肆佰叁拾玖元陆角）。', NULL, NULL, NULL, '2', '已核', 7, '2023-12-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491355', 'CMC1：A-23089', 'PA2232-2023-1', '雅江抽水蓄能电站规划阶段测绘技术服务合同', NULL, '0231', 170689.04, NULL, NULL, 22, '2023-12-04', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥170689.04元（大写：人民币壹拾柒万零陆佰捌拾玖元零肆分），其中：不含税价款为人民币161027.40元（大写：人民币壹拾陆万壹仟零贰拾柒元肆角），适用增值税税率6 %，税费为人民币9661.64元（大写：人民币玖仟陆佰陆拾壹元陆角肆分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-12-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491359', 'CMC1：A-23080', 'A239KX-2023-CH01', '岗托水电站可研阶段测绘技术服务合同', NULL, '0231', 3900006.17, NULL, NULL, 22, '2023-10-30', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥3900006.17元（大写：人民币叁佰玖拾万零陆元壹角柒分），其中：不含税价款为人民币3679251.10元（大写：人民币叁佰陆拾柒万玖仟贰佰伍拾壹元壹角），适用增值税税率6 %，税费为人民币220755.07元（大写：人民币贰拾贰万零柒佰伍拾伍元零柒分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-11-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491361', 'CMC1：A-23085', 'NZK21254-2023-CH02（补充）', '叶巴滩混合式抽水蓄能电站渣场地形图测绘技术服务合同补充协议', NULL, '0231', 257702.40, NULL, NULL, 22, '2023-11-24', '本补充协议暂定合同总价为人民币257702.40元（大写：贰拾伍万柒仟柒佰零贰元肆角），其中：不含税价款为人民币243115.47元（大写：贰拾肆万叁仟壹佰壹拾伍元肆角柒分），适用增值税税率6%，税费为人民币14586.93元（大写：壹万肆仟伍佰捌拾陆元玖角叁分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-11-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491363', 'HT2023C003', NULL, '新龙抽蓄电站规划加深阶段测绘技术服务合同', NULL, '0231', 252957.55, NULL, NULL, 22, '2023-10-07', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥252957.55元（大写：人民币贰拾伍万贰仟玖佰伍拾柒元伍角伍分），其中：不含税价款为人民币238639.20元（大写：人民币贰拾叁万捌仟陆佰叁拾玖元贰角），适用增值税税率6 %，税费为人民币14318.35元（大写：人民币壹万肆仟叁佰壹拾捌元叁角伍分）。', NULL, NULL, NULL, '2', '同意', 7, '2023-10-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491364', 'CMC1：A-23086', 'KSLSXM23-02-2023-CH02（补充）', '理塘抽水蓄能电站规划加深阶段测绘技术服务合同补充协议', NULL, '0231', 125581.38, NULL, NULL, 22, '2023-11-24', '本补充协议暂定合同总价为人民币125581.38元（大写：壹拾贰万伍仟伍佰捌拾壹元叁角捌分），其中：不含税价款为人民币118473.00元（大写：壹拾壹万捌仟肆佰柒拾叁元整），适用增值税税率6%，税费为人民币7108.38元（大写：柒仟壹佰零捌元叁角捌分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-11-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491369', 'CMC1：A-23079', NULL, '老沟水库库容复核地形图测绘技术服务合同', NULL, '0228', 31760.00, NULL, NULL, 22, '2023-10-25', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币￥31760.00元（大写：人民币叁万壹仟柒佰陆拾元整），其中：不含税价款为人民币29962.26元（大写：人民币贰万玖仟玖佰陆拾贰元贰角陆分），适用增值税税率6 %，税费为人民币1797.74元（大写：人民币壹仟柒佰玖拾柒元柒角肆分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-11-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491372', 'CMC1：A-23072', NULL, '长河坝水电站汤坝移民安置新址、汤坝料场等地形图测绘技术服务合同', NULL, '0226', 102000.00, NULL, NULL, 22, '2023-09-28', '本合同为总价承包计价方式，合同总金额为人民币￥102000元（大写：人民币壹拾万贰仟元整），其中：不含税价款为人民币￥96226.42元（大写：人民币玖万陆仟贰佰贰拾陆元肆角贰分），适用增值税税率6 %，税费为人民币￥5773.58元（大写：人民币伍仟柒佰柒拾叁元伍角捌分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-09-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491373', 'CMC1：A-23078', 'HBLSXM23-2023-CH01', '泸定水电站过鱼设施补建地形图及断面测绘技术服务合同', NULL, '0231', 55940.00, NULL, NULL, 22, '2023-10-23', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥55940.00元（大写：人民币伍万伍仟玖佰肆拾元整），其中：不含税价款为人民币52774.00元（大写：人民币伍万贰仟柒佰柒拾肆元整），适用增值税税率6 %，税费为人民币3166.00元（大写：人民币叁仟壹佰陆拾陆元整）。', NULL, NULL, NULL, '2', '已核', 7, '2023-10-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491375', 'CMC1：A-23075', 'NZK22132-2023-CH01', '张坎航电枢纽工程排涝区域地形图测绘技术服务合同', NULL, '0231', 400001.20, NULL, NULL, 22, '2023-10-18', '甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥400001.20元（大写：人民币肆拾万零壹元贰角），其中：不含税价款为人民币377359.62元（大写：人民币叁拾柒万柒仟叁佰伍拾玖元陆角贰分），适用增值税税率6 %，税费为人民币22641.58元（大写：人民币贰万贰仟陆佰肆拾壹元伍角捌分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-10-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491376', 'CMC1：A-23063', 'A418CB-2023-CH01', '老木孔航电枢纽工程可研阶段排涝区域地形图测绘技术服务合同', NULL, '0231', 257459.63, NULL, NULL, 22, '2023-08-28', '本合同为总价承包计价方式，合同总金额为人民币￥257459.63元（大写：人民币贰拾伍万柒仟肆佰伍拾玖元陆角叁分），其中：不含税价款为人民币242886.44元（大写：人民币贰拾肆万贰仟捌佰捌拾陆元肆角四分），适用增值税税率6 %，税费为人民币14573.19元（大写：人民币壹万肆仟伍佰柒拾叁元壹角玖分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-30', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491379', 'CMC1：A-23065', 'NZK21316-2023-CH01', '甘孜抽水蓄能电站规划加深阶段测绘技术服务合同', NULL, '0231', 365289.78, NULL, NULL, 22, '2023-08-24', '本合同为总价承包计价方式，合同总金额为人民币￥365289.78元（大写：人民币叁拾陆万伍仟贰佰捌拾玖元柒角捌分），其中：不含税价款为人民币344613.00元（大写：人民币叁拾肆万肆仟陆佰壹拾叁元整），适用增值税税率6 %，税费为人民币20676.78元（大写：人民币贰万零陆佰柒拾陆元柒角捌分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491381', 'CMC1：A-23040', NULL, '四川绵竹抽水蓄能电站界桩测设工作技术服务合同', NULL, '0227', 409900.00, NULL, NULL, 22, '2023-06-15', '本合同不含税价格为人民币409900.00 元（大写：人民币肆拾万玖仟玖佰元整），适用增值税税率6%，税费为人民币23201.89元，故本合同含税总价为人民币386698.11元（大写：人民币叁拾捌万陆仟陆佰玖拾捌元壹角壹分）。本合同不含税价格为固定不变价格，增值税税额如遇国家有关税收规定调整做相应调整。本合同价包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2023-07-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491382', 'CMC1：A-23074', 'KSLSXM23-06-2023-CH01', '盐源抽水蓄能电站预可阶段测绘技术服务合同', NULL, '0231', 813869.70, NULL, NULL, 22, '2023-10-09', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥813869.70元（大写：人民币捌拾壹万叁仟捌佰陆拾玖元柒角），其中：不含税价款为人民币767801.60元（大写：人民币柒拾陆万柒仟捌佰零壹元陆角），适用增值税税率6 %，税费为人民币46068.10元（大写：人民币肆万陆仟零陆拾捌元壹角）。', NULL, NULL, NULL, '2', '已核', 7, '2023-10-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491385', 'CMC1：A-23059', 'NZK22126-2023-CH01', '两河口混合式抽水蓄能电站可研阶段水文勘测测绘技术服务合同', NULL, '0231', 380785.67, NULL, NULL, 22, '2023-08-15', '本合同为总价承包计价方式，合同总金额为人民币￥380785.67元（大写：人民币叁拾捌万零柒佰捌拾伍元陆角柒分），其中：不含税价款为人民币359231.76元（大写：人民币叁拾伍万玖仟贰佰叁拾壹元柒角陆分），适用增值税税率6 %，税费为人民币21553.91元（大写：人民币贰万壹仟伍佰伍拾叁元玖角壹分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411499491386', 'CMC1：A-24021', NULL, '林芝市巴宜区实用性村庄规划项目地形图测绘技术服务合同', NULL, '0237', 1427560.51, NULL, NULL, 22, '2024-05-06', '本合同为单价合同，暂定合同总价为人民币1427560.51元（大写壹佰肆拾贰万柒仟伍佰陆拾元伍角壹分），其中：不含税价款为人民币1346755.2元（大写壹佰叁拾肆万陆仟柒佰伍拾伍元贰角），适用增值税税率6%，税费为人民币80805.31元（大写捌万零捌佰零伍元叁角壹分）。', NULL, NULL, NULL, '2', '已核', 7, '2024-05-07', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411562405890', 'CMC1：A-23023', NULL, '崇州抽水蓄能电站预可阶段测绘技术服务合同', NULL, '0231', 353338.70, NULL, NULL, 22, '2023-03-24', '本合同为总价承包计价方式，合同总金额为人民币￥353338.70元（大写：人民币叁拾伍万叁仟叁佰叁拾捌元柒角），其中：不含税价款为人民币333338.40元（大写：人民币叁拾叁万叁仟叁佰叁拾捌元肆角），适用增值税税率6 %，税费为人民币20000.30元（大写：人民币贰万元叁角）。', NULL, NULL, NULL, '2', '已核', 7, '2023-03-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411587571714', 'CMC1：A-23025', 'NZK22321-2023-CH01', '平昌抽水蓄能电站预可阶段测绘技术服务合同', NULL, '0231', 369836.12, NULL, NULL, 22, '2023-04-04', '本合同为总价承包计价方式，合同总金额为人民币￥369836.12元（大写：人民币叁拾陆万玖仟捌佰叁拾陆元壹角贰分），其中：不含税价款为人民币348902.00元（大写：人民币叁拾肆万捌仟玖佰零贰元整），适用增值税税率6 %，税费为人民币20934.12元（大写：人民币贰万零玖佰叁拾肆元壹角贰分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-04-04', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411650486273', 'CMC2：A-22015', 'SGXZFD00SJYJ2200048', '国网西藏拉萨发电公司羊湖电站压力钢管永久变形监测沉降水准工作基点改造施工合同', NULL, '0085', 948046.00, NULL, NULL, 22, '2022-06-06', '本合同实行总价承包的，本合同价格为人民币（大写）玖拾肆万捌仟零肆拾陆元整（￥948046.00）。', '2022-06-08', NULL, NULL, '2', NULL, 7, '2022-06-07', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411751149569', 'CMC1：A-23053', NULL, '波罗水电站可研阶段测绘技术服务合同', NULL, '0231', 304148.92, NULL, NULL, 22, '2023-08-09', '本合同为总价承包计价方式，合同总金额为人民币￥304148.92 元（大写：人民币叁拾万零肆仟壹佰肆拾捌元玖角贰分），其中：不含税价款为人民币286932.94元（大写：人民币贰拾捌万陆仟玖佰叁拾贰元玖角肆分），适用增值税税率6 %，税费为人民币17215.98元（大写：人民币壹万柒仟贰佰壹拾伍元玖角捌分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411772121090', 'CMC1：A-23033', 'NZK21301-2023-CH01', '道孚抽水蓄能电站可研阶段测绘技术服务合同', NULL, '0231', 318629.64, NULL, NULL, 22, '2023-05-19', '本合同为总价承包计价方式，合同总金额为人民币￥318629.64元（大写：人民币叁拾壹万捌仟陆佰贰拾玖元陆角肆分），其中：不含税价款为人民币300594.00元（大写：人民币叁拾万零伍佰玖拾肆元整），适用增值税税率6 %，税费为人民币18035.64元（大写：人民币壹万捌仟零叁拾伍元陆角肆分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-05-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411788898306', 'CMC2：A-22003', NULL, '南坪片区排水管网补勘补测项目内窥检测劳务外协合同', NULL, '0275', 930000.00, NULL, NULL, 22, '2021-11-10', '经友好协商，内窥检测(CCTV)单价人民币大写:_壹万贰仟元/公里， 人民币小写:12000元/公里;内窥检测(QV)单价为人民币大写:.陆仟元/公里，人民币小写:6000元/公里;预估总工作量为80公里，其中内窥检测(CCTV)75公里，内窥检测(QV)5公里，总费用预估人民币大写:玖拾叁万元整，人民币小写:930000. 00元。最终按实际完成工作量结算(如甲方在对外结算时，QV 无法结算费用，则该合同中的QV部分不计费)。\n上述项目最终费用包括但不限于人工工资、加班费用、奖金、福利、社保、劳保等费用，实施作业必须的材料、设备、机械等费用，以及乙方管理、安全、交通、运输、利润、税金、各种风险等在内的一切费用。', NULL, NULL, NULL, '0', '同意', 7, '2023-08-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411788898307', 'CMC2：A-22004', 'C.WW.2021-165', '水土新城排水管网精细化普查项目内窥检测劳务外协合同', NULL, '0275', 1598000.00, NULL, NULL, 22, '2021-11-15', '经友好协商，内窥检测(CCTV)单价人民币大写:壹万元/公里,人民币小写: 10000元/公里;内窥检测(QV) 单价为人民币大写:肆仟元/公里， 人民币小写:4000元/公里;预估总工作量为170公里，其中内窥检测(CCTV) 153公里，内窥检测(QV)17公里，总费用预估人民币大写:壹佰伍拾玖点捌万元整，人民币小写: 1598000 元。最终按实际完成工作量结算。\n上述项目最终费用包括但不限于人工工资、加班费用、奖金、福利、社保、劳保等费用，实施作业必须的材料、设备、机械等费用，以及乙方管理、安全、交通、运输、利润、税金、各种风险等在内的一切费用。', NULL, NULL, NULL, '0', '同意', 7, '2023-08-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411809869825', 'CMC1：A-23024', NULL, 'HT项目规划阶段测绘技术服务合同', NULL, '0231', 284108.83, NULL, NULL, 22, '2023-03-24', '本合同为总价承包计价方式，合同总金额为人民币 284108.83元（大写人民币贰拾捌万肆仟壹佰零捌元捌角叁分 ），其中：不含税价款为人民币 268027.20元（大写人民币贰拾陆万捌仟零贰拾柒元贰角），适用增值税税率6 %，税费为人民币 16081.63 元（大写人民币壹万陆仟零捌拾壹元陆角叁分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-03-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411826647041', 'CMC1：A-23029', 'NZK23006-2023-CH01', '宜宾蟠龙抽水蓄能电站预可阶段测绘技术服务合同', NULL, '0231', 117149.29, NULL, NULL, 22, '2023-05-04', '本合同为总价承包计价方式，合同总金额为人民币￥117149.29元（大写：人民币壹拾壹万柒仟壹佰肆拾玖元贰角玖分），其中：不含税价款为人民币110518.20元（大写：人民币壹拾壹万零伍佰壹拾捌元贰角），适用增值税税率6 %，税费为人民币6631.09元（大写：人民币陆仟陆佰叁拾壹元零玖分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-05-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411847618561', 'CMC1：A-23060', NULL, '四川省大渡河猴子岩丹巴县土地开发整理工程设计外部供水及料场地形图测绘技术服务合同', NULL, '0227', 128388.00, NULL, NULL, 22, '2023-08-21', '本合同为总价合同，合同总价（含税）为人民币 128388.00 元（大写：壹拾贰万捌仟叁佰捌拾捌元），其中：不含税价款为人民币 121121.00元（大写： 壹拾贰万壹仟壹佰贰拾壹元），适用增值税税率 6.0 %，税费为人民币 7267.00 元（大写 柒仟贰佰陆拾柒元）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411885367297', 'CMC1：A-23069', NULL, '（泸州）金龙胡市片区现代农业示范园区地形图测绘技术服务合同', NULL, '0227', 116600.00, NULL, NULL, 22, '2023-09-25', '本合同含增值税合同总价为人民币（大写）【壹拾壹万陆仟陆佰元整】(&yen;【116600.00】元)，税率为6%，其中：增值税额为：人民币（大写）【陆仟陆佰元整】(&yen;【6600.00】元)，不含增值税总价为：人民币（大写）【壹拾壹万元整】(&yen;【110000.00】元)；此价格为一口价，不再进行调整。\n本合同总价包括乙方提供合同范围内所有研究内容的技术服务全部费用，包括乙方完成经费人民币（大写）：壹拾壹万陆仟陆佰元整（&yen;116600.00元），若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以不含税合同总价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '已核', 7, '2023-09-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411927310338', 'CMC1：A-23007', 'A186KX-2022-02', '牙根二级产卵场水下地形测绘技术服务合同', NULL, '0231', 77586.91, NULL, NULL, 22, '2023-02-01', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币77586.91元（大写：人民币柒万柒仟伍佰捌拾陆元玖角壹分），适用增值税率为 6 %。其中不含税价为73195.20元（大写：人民币柒万叁仟壹佰玖拾伍元贰角），增值税为4391.71元（大写：人民币肆仟叁佰玖拾壹元柒角壹分）。若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '已核', 7, '2023-02-07', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411944087553', 'CMC1：A-23010', 'A237SG-2022-04', '孟底沟水电站尼呷2#承包商经营地及施工场地1：500地形图测绘技术服务合同', NULL, '0231', 36262.85, NULL, NULL, 22, '2023-02-09', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币36262.85元（大写：人民币叁万陆仟贰佰陆拾贰元捌角伍分），适用增值税率为 6 %。其中不含税价为34210.24元（大写：人民币叁万肆仟贰佰壹拾元贰角肆分），增值税为2052.61元（大写：人民币贰仟零伍拾贰元陆角壹分）。若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '已核', 7, '2023-02-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881411986030594', 'HT2022W004', 'HZ2022-235', '海南全岛地形变化较大区域、漏洞区域机载LIDAR数据获取技术服务项目', NULL, '0282', 811420.00, NULL, NULL, 13, '2022-11-01', NULL, '2022-11-04', NULL, NULL, '2', '同意', 7, '2022-11-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412002807809', 'CMC1：A-23014', 'A083SG-2022-01', '长河坝抽水蓄能电站测绘技术服务合同', NULL, '0231', 381592.44, NULL, NULL, 22, '2023-02-20', '本合同为总价承包计价方式，合同总金额为人民币381592.44元（大写人民币叁拾捌万壹仟伍佰玖拾贰元肆角肆分），其中：不含税价款为人民币359992.87元（大写人民币叁拾伍万玖仟玖佰玖拾贰元捌角柒分），适用增值税税率6 %，税费为人民币21599.57元（大写人民币贰万壹仟伍佰玖拾玖元伍角柒分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-02-20', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412040556545', 'HT2022W029', NULL, '仪陇县林权数据整合建库采购项目政府采购合同', NULL, '0210', 3157000.00, NULL, NULL, 23, '2022-10-26', NULL, '2022-11-09', NULL, NULL, '2', '同意', 7, '2022-10-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412057333761', 'HT2022W028', NULL, '蓬安县林权类不动产登记数据整合项目政府采购合同（服务类）', NULL, '0125', 3820000.00, NULL, NULL, 23, '2022-10-25', NULL, '2022-11-12', NULL, NULL, '2', NULL, 7, '2022-10-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412074110977', 'CMC1：A-22050', 'M00500-2022-01', '广东省云浮市云安区都杨镇牛栏坑绿色建材项目测绘技术服务合同', NULL, '0231', 208175.00, NULL, NULL, 22, '2022-10-28', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币208175元（大写：人民币贰拾万零捌仟壹佰柒拾伍元整），适用增值税率为 6 %。其中不含税价为196391.51元（大写：人民币壹拾玖万陆仟叁佰玖拾壹元伍角壹分），增值税为11783.49元（大写：人民币壹万壹仟柒佰捌拾叁元肆角玖分）。若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '已核', 7, '2022-10-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412090888194', 'CMC2：A-22019', 'SGXZNQ00YJJS2200324', '国网西藏那曲供电公司查龙水电站2021年度监测资料整编、分析项目技术服务合同', NULL, '0086', 416898.00, NULL, NULL, 22, '2022-09-26', '技术服务报酬总额为：人民币（大写） 肆拾壹万陆仟捌佰玖拾捌元整  （&yen;416898.00）（含税），其中，不含税价人民币（大写） 叁拾玖万叁仟叁佰元整 （&yen;393300.00），增值税税率  6  %，增值税税额 23598.00元。当合同约定的税率与国家税法规定及税务机关认定的税率不一致时，以国家税法规定及税务机关认定的税率为准进行调整，调整时以不含税价为基准，执行国家法规规定及税务机关规定的税率。', '2022-10-13', NULL, NULL, '2', NULL, 7, '2022-10-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412107665410', 'HT2020W077', 'SJK-QT-2020-008', '大渡河双江口水电站枢纽工程施工测量控制网复测合同', NULL, '0159', 3855100.00, NULL, NULL, 22, '2020-11-16', '本合同总价为人民币（大写）叁佰捌拾伍万伍仟壹佰元整（385.51 万元）。', '2020-12-15', NULL, NULL, '2', NULL, 7, '2020-11-19', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412124442625', 'CMC1：A-23042', NULL, '石棉县碳酸钙产业园项目地形图测绘技术服务合同', NULL, '0227', 378000.00, NULL, NULL, 22, '2023-07-03', '本合同不含税价格为人民币356603.77元，适用增值税税率6%，税费为人民币21396.23元，故本合同含税总价为人民币378000.00元（大写：叁拾柒万捌仟元整），本合同不含税总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2023-07-04', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412153802753', 'CMC1：A-23022', 'KSLSXM21-06-2022-CH02', '广东台山黄茅岗抽水蓄能水电站预可阶段测绘技术服务合同', NULL, '0231', 845956.32, NULL, NULL, 22, '2023-03-24', '本合同为总价承包计价方式，合同总金额为人民币845956.32元（大写：人民币捌拾肆万伍仟玖佰伍拾陆元叁角贰分），其中：不含税价款为人民币798072.00元（大写：人民币柒拾玖万捌仟零柒拾贰元整），适用增值税税率6 %，税费为人民币47884.32元（大写：人民币肆万柒仟捌佰捌拾肆元叁角贰分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-03-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412204134402', 'CMC1：A-23001', NULL, '屏山抽水蓄能电站测绘技术服务合同', NULL, '0231', 375002.22, NULL, NULL, 22, '2023-01-04', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币375002.22元（大写：人民币叁拾柒万伍仟零贰元贰角贰分），适用增值税率为 6 %。其中不含税价为353775.68元（大写：人民币叁拾伍万叁仟柒佰柒拾伍元陆角捌分），增值税为21226.54元（大写：人民币贰万壹仟贰佰贰拾陆元伍角肆分）。若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '已核', 7, '2023-01-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412220911618', 'CMC1：A-23071', NULL, '大熊猫国家公园芦山片区保护设施恢复重建项目地形图测绘技术服务合同', NULL, '0227', 278800.00, NULL, NULL, 22, '2023-10-07', '本合同含增值税合同总价为人民币（大写）【贰拾柒万捌仟捌佰元整】(&yen;【278800.00】元)，税率为6%，其中：增值税额为：人民币（大写）【壹万伍仟柒佰捌拾壹元壹角叁分】(&yen;【15781.13】元)，不含增值税总价为：人民币（大写）【贰拾陆万叁仟零壹拾捌元捌角柒分】(&yen;【263018.87】元)；此价格为一口价，不再进行调整。', NULL, NULL, NULL, '2', '同意', 7, '2023-10-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412271243265', 'CMC1：A-23082', NULL, '锦屏水电站水光互补项目1：500地形图测绘技术服务合同', NULL, '0238', 280800.00, NULL, NULL, 22, '2023-11-16', '本合同采用总价合同的承包方式。本合同不含税价格为人民币264905.66 元，适用增值税税率 6 %，税费为人民币15894.34元，故本合同总价  为人民币280800元（大写：贰拾捌万零捌佰元整）。本合同总价为固  定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全\n部费用。', NULL, NULL, NULL, '2', '已核', 7, '2023-11-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412296409090', 'CMC1：A-22057', 'KSLSXM21-05-2022-CH01', '山西沁水抽水蓄能电站可研阶段测绘技术服务合同', NULL, '0231', 161879.02, NULL, NULL, 22, '2022-11-21', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币161879.02元（大写：人民币壹拾陆万壹仟捌佰柒拾玖元零贰分），适用增值税率为 6 %。其中不含税价为152716.06元（大写：人民币壹拾伍万贰仟柒佰壹拾陆元零陆分），增值税为9162.96元（大写：人民币玖仟壹佰陆拾贰元玖角陆分）。若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', NULL, 7, '2022-11-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412346740737', 'HT2022C028', NULL, '东石岭抽水蓄能水电站测绘技术服务合同', NULL, '0230', 344114.16, NULL, NULL, 22, '2022-11-21', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币344114.16元（大写：人民币叁拾肆万肆仟壹佰壹拾肆元壹角陆分），适用增值税率为 6 %。其中不含税价为324636元（大写：人民币叁拾贰万肆仟陆佰叁拾陆），增值税为19478.16元（大写：人民币壹万玖仟肆佰柒拾捌元壹角陆分）。若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '已核', 7, '2022-11-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412363517954', 'HT2021W053', NULL, '贵阳市自然资源统一确权登记项目技术协作合同', NULL, '0075', 296335.00, NULL, NULL, 22, '2021-07-20', '合同金额按照预划单元首次登记通告的长度和面积进行核算，其中水流登记单元（单价） 4850.00元/千米。实际工作经费总金额按照预划单元首次登记通告的长度和面积进行核算。\n合同预估总价为&yen;296335.00（大写：人民币贰拾玖万陆仟叁佰叁拾伍元）。', '2021-07-26', NULL, NULL, '2', NULL, 7, '2021-07-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412422238210', 'HT2022W021', 'YLDC-ETA-ZD2022239', '雅砻江二滩水库泥沙断面测量项目合同', NULL, '0200', 694500.00, NULL, NULL, 22, '2022-04-18', NULL, '2022-04-28', NULL, NULL, '2', NULL, 7, '2022-04-20', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412476764161', 'CMC1：A-22044', 'NZK21254-2022-CH01', '金沙江上游清洁能源基地叶巴滩抽水蓄能电站测绘技术服务合同', NULL, '0231', 265343.00, NULL, NULL, 22, '2022-08-01', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币265343.00元（大写：人民币贰拾陆万伍仟叁佰肆拾叁元整），适用增值税率为 6 %。其中不含税价为250323.58元（大写：人民币贰拾伍万零叁佰贰拾叁元伍角捌分），增值税为15019.42 元（大写：人民币壹万伍仟零壹拾玖元肆角贰分）。若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', NULL, 7, '2022-08-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412514512898', 'CMC1：A-23006', NULL, '广西资源抽水蓄能水电站测绘技术服务合同', NULL, '0231', 1179947.33, NULL, NULL, 22, '2023-02-06', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币1179947.48元（大写：人民币壹佰壹拾柒万玖仟玖佰肆拾柒元肆角捌分），适用增值税率为 6 %。其中不含税价为1113158.00元（大写：人民币壹佰壹拾壹万叁仟壹佰伍拾捌元），增值税为66789.48元（大写：人民币陆万陆仟柒佰捌拾玖元肆角捌分）。若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '已核', 7, '2023-02-07', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412573233153', 'CMC1：A-22046', 'NZK22126-2022-01', '雅砻江两河口混合式抽水蓄能水电站测绘技术服务合同', NULL, '0231', 301634.68, NULL, NULL, 22, '2022-10-18', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币301634.68元（大写：人民币叁拾万壹仟陆佰叁拾肆元陆角捌分），适用增值税率为 6 %。其中不含税价为284561.02元（大写：人民币贰拾捌万肆仟伍佰陆拾壹元贰分），增值税为17073.66元（大写：人民币壹万柒仟零柒拾叁元陆角陆分）。若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '已核', 7, '2022-10-20', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412594204674', 'CMC1：A-23067', NULL, '攀枝花三峡光伏发电项目地形图测绘技术服务合同', NULL, '0238', 319968.00, NULL, NULL, 22, '2023-08-02', '本合同不含税价格为人民币 301856.61 元，适用增值税税率 6 %，税费为人民币 18111.39 元，故本合同总价为人民币 319968.00 元（大写：捌叁拾壹万玖仟玖佰陆拾捌元整）。', NULL, NULL, NULL, '2', '已核', 7, '2023-08-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412631953410', 'CMC1：A-22047', 'A237G-2022-CH01', '孟底沟水电站施工阶段测绘技术服务合同', NULL, '0231', 84960.26, NULL, NULL, 22, '2022-10-10', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币84960.26元（大写：人民币捌万肆仟玖佰陆拾元贰角陆分），适用增值税率为 6 %。其中不含税价为80151.19元（大写：人民币捌万零壹佰伍拾壹元壹角玖分），增值税为4809.07元（大写：人民币肆仟捌佰零玖元柒分）。若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '已核', 7, '2022-10-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412682285058', 'HT2022C027', NULL, '直孔抽蓄电站预可研地形图测绘项目测绘技术服务合同', NULL, '0237', 799767.20, NULL, NULL, 22, '2022-11-24', '本合同总价为：&yen;799767.27元（大写：柒拾玖万玖仟柒佰陆拾柒元贰角柒分），本合同约定总价格为不含税价格+增值税，不含税价格为&yen;754497.42元，增值税税率为6%，增值税税额为&yen;45269.85元，不含税价格不因国家税率变化而变化，若在合同履行期间，遇国家税率调整，则增值税相应调整，从而价税合计相应调整，以开具发票的时间为准；包括乙方提供本合同范围内所有硬件、软件所需的全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2022-11-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412736811010', 'CMC1：A-23004', 'KSLSXM22-08-2022-CH01', '广西上林抽水蓄能水电站测绘技术服务合同', NULL, '0231', 94674.57, NULL, NULL, 22, '2023-01-09', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币94674.57元（大写：人民币玖万肆仟陆佰柒拾肆元伍角柒分），适用增值税率为 6 %。其中不含税价为89315.63元（大写：人民币捌万玖仟叁佰壹拾伍元陆角叁分），增值税为5358.94元（大写：人民币伍仟叁佰伍拾捌元玖角肆分）。若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。\n本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2023-01-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412753588225', 'CMC1：A-22052', NULL, '猴子岩水电站泥洛沟取水口及水厂新址等项目地形图测绘技术服务合同', NULL, '0227', 63000.00, NULL, NULL, 22, '2022-11-22', '本合同不含税价为人民币59433.96元，适用增值税税率6%，税费为人民币3566.04元，故本合同含税总价为&yen;63000.00元（大写：人民币陆万叁仟元整）。本合同不含税总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2022-11-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412774559745', 'CMC1：A-23005', NULL, '天星坝水库输水工程技施阶段左干管地形图补测项目技术服务合同', NULL, '0227', 402000.00, NULL, NULL, 22, '2022-12-05', '本合同不含税价格为人民币 379245.28 元，适用增值税税率 6%，税费为人民币22754.72 元，故本合同含税总价为人民币￥402000.00 元（大写：肆拾万贰仟圆整）。\n本合同不含税总价为固定不变价格，包括乙方完成所有测绘工作的技术服务费（包含完成工作内容所需的工程基本直接费、其它直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）。', NULL, NULL, NULL, '2', '已核', 7, '2022-12-08', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412812308481', 'CMC1：A-23021', NULL, '凉山州甘洛二号及沙岱地块光伏项目地形图测绘技术服务合同', NULL, '0238', 202000.00, NULL, NULL, 22, '2023-03-22', '本合同不含税价格为人民币190566.04元，适用增值税税率 6 %，税费为人民币11433.96元，故本合同总价为人民币202000元（大写：贰拾万零贰仟元整）。本合同总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', NULL, NULL, NULL, '2', '同意。', 10, '2023-03-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412875223041', 'CMC1：A-23008', 'KSLSXM21-06-2022-CH01', '山西左权箕山抽水蓄能水电站测绘技术服务合同', NULL, '0231', 247568.12, NULL, NULL, 22, '2023-02-01', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币247568.12元（大写：人民币贰拾肆万柒仟伍佰陆拾捌元壹角贰分），适用增值税率为 6 %。其中不含税价为233554.83元（大写：人民币贰拾叁万叁仟伍佰伍拾肆元捌角叁分），增值税为14013.29元（大写：人民币壹万肆仟零壹拾叁元贰角玖分）。若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '已核', 7, '2023-02-07', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412946526209', 'CMC1：A-23066', 'CD2C20231521', '两河口水电站水光互补一期项目地形图测绘技术服务合同', NULL, '0226', 461200.00, NULL, NULL, 22, '2023-09-07', '本合同不含税价格为人民币435094.34元，适用增值税税率 6 %，税费为人民币26105.66元，故本合同总价为人民币461200元（大写：肆拾陆万壹仟贰佰元整）。本合同总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2023-09-08', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881412984274945', 'CMC1：A-22029', 'NZK457-2022-CH01', '大岗山水电站泄洪洞出口测绘技术服务合同', NULL, '0231', 10596.00, NULL, NULL, 22, '2022-05-23', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币10596.00元（大写：人民币壹万零伍佰玖拾陆元整），适用增值税率为 6 %。其中不含税价为9996.23元（大写：人民币玖仟玖佰玖拾陆元贰角叁分），增值税为599.77元（大写：人民币伍佰玖拾玖元柒角柒分）。', '2022-05-27', NULL, NULL, '2', NULL, 7, '2022-05-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413009440769', 'CMC1：A-22042', 'A219KX-2022-CH01', '革什扎河两河口水电站可研阶段测绘技术服务合同', NULL, '0231', 38331.00, NULL, NULL, 22, '2022-06-20', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币38331.00   元（大写：人民币叁万捌仟叁佰叁拾壹元整），适用增值税率为 6 %。其中不含税价为36161.32元（大写：人民币叁万陆仟壹佰陆拾壹元叁角贰分），增值税为 2169.68 元（大写：人民币贰仟壹佰陆拾玖元陆角玖分）。\n本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。除本合同另有约定外，此合同总价承包不予调整。', NULL, NULL, NULL, '2', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413030412290', 'CMC1：A-22036', 'KSLSXM-2022-CH01', '巴楚河松多水电站坐标转换及矢量数据库制作测绘技术服务合同', NULL, '0231', 35055.00, NULL, NULL, 22, '2022-06-20', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币35055.00元（大写：人民币叁万伍仟零伍拾伍元整），适用增值税率为 6 %。其中不含税价为33070.75元（大写：人民币叁万叁仟零柒拾元柒角伍分），增值税为 1984.25 元（大写：人民币壹仟玖佰捌拾肆元贰角伍分）。\n本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。除本合同另有约定外，此合同总价承包不予调整。', '2022-06-23', NULL, NULL, '2', NULL, 7, '2022-06-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413072355329', 'CMC2：G-22003', 'SGTYHT/21-JS-226', '浙江宁海抽水蓄能电站上下库库容曲线测量服务技术服务合同', NULL, '0221', 179000.00, NULL, NULL, 22, '2022-01-11', '技术服务报酬总额为：人民币（大写）壹拾柒万玖仟元整（￥179000）（含税），其中，不含税价人民币壹拾陆万捌仟贰佰陆拾元整（大写）（￥168867.9），增值税税率 6 %，增值税税额10132.1元。当合同约定的税率与国家税法规定及税务机关认定的税率不一致时，以国家税法规定及税务机关认定的税率为准进行调整，调整时以不含税价为基准，执行国家法规规定及税务机关规定的税率。\n该报酬包含乙方履行本合同所需全部费用，包括但不限于员工工资、加班费、咨询费、资料费、交通费、食宿费以及税费等。', '2022-01-17', NULL, NULL, '2', NULL, 7, '2022-01-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413093326850', 'CMC2：A-22014', '七司若尔盖（技术）字（2022）-02-01', '黄河干流若尔盖应急处置（抢险救灾）工程施工段水下地形测绘技术服务合同', NULL, '0261', 120000.00, NULL, NULL, 22, '2022-03-03', '经甲乙双方协商，本合同采用总价承包模式计价，本次施工段水下地形测量技术服务费总金额为120000.00元（大写：壹拾贰万元整），该费用包含为完成双方约定范围内所需的人工费、仪器设备使用费、安全生产投入及文明施工措施费、管理费、利润及税金等费用，但不包括为完成该项工作所发生的破除冰面措施费。超出作业范围的工作费用，按照300000.00元/km²进行。', '2022-05-31', NULL, NULL, '2', NULL, 7, '2022-03-04', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413131075586', 'CMC1：A-22034', 'CD2C20220674', '直孔电站库区淤积勘测技术服务项目测绘劳务服务合同', NULL, '0237', 270000.00, NULL, NULL, 22, '2022-06-09', '本合同总价为￥270000.00元（大写：人民币贰拾柒万元整），本合同约定总价格为不含税价格+增值税，不含税价格为￥254716.98元，增值税税率为 6 %，增值税税额为￥15283.02元，不含税价格不因国家税率变化而变化，若在合同履行期间，遇国家税率调整，则增值税相应调整，从而价税合计相应调整，以开具发票的时间为准；包括乙方提供本合同范围内所有硬件、软件所需的全部费用。', '2022-06-17', NULL, NULL, '2', NULL, 7, '2022-06-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413147852802', 'CMC1：A-22048', NULL, '金上～湖北±800千伏直流工程实物指标调查测绘配合技术服务合同', NULL, '0227', 130000.00, NULL, NULL, 22, '2022-10-28', '本合同不含税价为人民币122641.51元，适用增值税税率6%，税费为人民币7358.49元，故本合同含税总价为人民币130000元（大写：壹拾叁万元整）。本合同不含税总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2022-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413164630018', 'CMC1：A-23048', NULL, '雅安市名山区百丈镇临溪河综合整治项目地形图测绘技术服务合同', NULL, '0227', 98000.00, NULL, NULL, 22, '2023-07-28', '本合同为单价合同，暂定合同总价为人民币98000.00元（大写：玖万捌仟元整），其中：不含税价款为人民币92452.83元（大写：玖万贰仟肆佰伍拾贰元捌角叁分），适用增值税税率6%，税费为人民币5547.17元（大写：伍仟伍佰肆拾柒元壹角柒分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-07-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413181407233', 'CMC1：A-23002', 'KSLSXM21-06-2022-CH01', '广东梅县抽水蓄能水电站测绘技术服务合同', NULL, '0231', 349081.52, NULL, NULL, 22, '2023-01-10', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币349081.52元（大写：人民币叁拾肆万玖仟零捌拾壹元伍角贰分），适用增值税率为 6 %。其中不含税价为329322.19元（大写：人民币叁拾贰万玖仟叁佰贰拾贰元壹角玖分），增值税为19759.33元（大写：人民币壹万玖仟柒佰伍拾玖元叁角叁分）。若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '已核', 7, '2023-01-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413227544578', 'CMC1：A-22032', 'A134SG-2022-CH01', '狮子坪水电站弃渣回采料场地形图测绘技术服务合同', NULL, '0231', 28700.00, NULL, NULL, 22, '2022-05-16', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币28700.00   元（大写：人民币贰万捌仟柒佰元整），适用增值税率为 6 %。其中不含税价为27075.47元（大写：人民币贰万柒仟零柒拾伍元肆角柒分），增值税为 1624.53 元（大写：人民币壹仟陆佰贰拾肆元伍角叁分）。', '2022-05-23', NULL, NULL, '2', NULL, 7, '2022-05-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413244321794', 'CMC1：A-23013', 'CD2C20230201', '四川省抽水蓄能电站（负荷侧）预可研测绘技术服务合同', NULL, '0233', 2449728.67, NULL, NULL, 22, '2023-02-10', '本合同采用总价承包方式，本合同暂定总价（含增值税）为：￥2449728.50元（大写：贰佰肆拾肆万玖仟柒佰贰拾捌元伍角，6%增值税金为：￥138663.88（大写：壹拾叁万捌仟陆佰陆拾叁元捌角捌分）。合同若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '已核', 7, '2023-02-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413265293314', 'CMC1：A-23009', 'NZK20220-2022-01', '西藏紫霞水电站预可阶段补充地形图测绘技术服务合同', NULL, '0231', 194965.58, NULL, NULL, 22, '2023-02-01', '本合同为总价承包计价方式，合同总金额为人民币194965.58元（大写壹拾玖万肆仟玖佰陆拾伍元伍角捌分），其中：不含税价款为人民币183929.79元（大写人民币壹拾捌万叁仟玖佰贰拾玖元柒角玖分），适用增值税税率6 %，税费为人民币11035.79元（大写人民币壹万壹仟零叁拾伍元柒角玖分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-02-07', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413328207874', 'HT2022W015', 'SGXZFD00SJJS2200029', '国网西藏拉萨发电公司直孔电站变形监测控制网复测及工作基点校测技术服务合同', NULL, '0085', 691210.00, NULL, NULL, 22, '2022-03-11', '技术服务报酬总额为：人民币（大写）陆拾玖万壹仟贰佰壹拾元整：（￥691210.00）（含税），其中，不含税价人民币陆拾伍万贰仟零捌拾肆元玖角壹分（大写）（￥652084.91），增值税税率6：%，增值税税额39125.09元。当合同约定的税率与国家税法规定及税务机关认定的税率不一致时，以国家税法规定及税务机关认定的税率为准进行调整，调整时以不含税价为基准，执行国家法规规定及税务机关规定的税率。\n该报酬包含乙方履行本合同所需全部费用，包括但不限于员工工资、加班费、咨询费、资料费、交通费、食宿费以及税费等。', '2022-03-15', NULL, NULL, '2', '已核', 7, '2022-03-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413344985090', 'HT2022W014', 'SGXZFD00SJJS2200026', '国网拉萨发电公司2022年直孔大坝、羊湖压力钢管等定期变形监测及年度资料整编技术服务合同', NULL, '0085', 1285751.17, NULL, NULL, 22, '2022-03-10', '5.1技术服务报酬总额为：人民币（大写）壹佰贰拾捌万伍任柒佰伍拾壹元壹角柒分（1285751.17）（含税），其中，不含税价人民币壹佰贰拾壹万贰任玖佰柒拾贰元捌角：（大写）（￥1212972.80），增值税税率6%，增值税税额72778.37元。当合同约定的税率与国家税法规定及税务机关认定的税率不一致时，以国家税法规定及税务机关认定的税率为准进行调整，调整时以不含税价为基准，执行国家法规规定及税务机关规定的税率。\n该报酬包含乙方履行本合同所需全部费用，包括但不限于员工工资、加班费、咨询费、资料费、交通费、食宿费以及税费等。', '2022-03-15', NULL, NULL, '2', '已核', 7, '2022-03-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413361762305', 'CMC2：A-22005', '5105212021000522', '泸县2021年度国土变更调查政府采购项目采购合同', NULL, '0111', 1535800.00, NULL, NULL, 22, '2022-01-12', '合同金额：人民币1535800元(大写：壹佰伍拾叁万伍仟捌佰元)。', '2022-01-18', NULL, NULL, '0', NULL, 7, '2023-03-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413395316737', 'HT2022W017', NULL, '乳源高新区绿之源西侧地块标准厂房建设项目沉降监测技术服务合同', NULL, '0138', 223004.96, NULL, NULL, 22, '2022-03-18', NULL, NULL, NULL, NULL, '0', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413412093953', 'CMC1：A-22028', 'A186KX-2022-CH01', '牙根二级水电站可研阶段测绘技术服务合同', NULL, '0231', 2925840.00, NULL, NULL, 22, '2022-06-27', '经甲、乙双方协商，本合同采用单价承包计价方式，合同总金额为人民币2925840.00   元（大写：人民币贰佰玖拾贰万伍仟捌佰肆拾元整），适用增值税率为 6 %。其中不含税价为2760226.42元（大写：人民币贰佰柒拾陆万零贰佰贰拾陆元肆角贰分），增值税为 165613.58 元（大写：人民币壹拾陆万伍仟陆佰壹拾叁元伍角捌分）。\n本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。除本合同另有约定外，此合同工作量单价不予调整。', '2022-06-29', NULL, NULL, '2', NULL, 7, '2022-06-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413462425602', 'HT2020W057', NULL, '新疆哈密抽水蓄能电站工程开挖区域精密测量及工程量计算技术服务合同', NULL, '0224', 915134.00, NULL, NULL, 22, '2020-08-10', '技术服务报酬总额为：人民币（大写）玖拾壹万伍仟壹佰叁拾肆元（&yen;915134.00）（含税）。其中，不含税价人民币（大写）捌拾陆万叁仟叁佰叁拾叁元玖角陆分（&yen;863333.96），增值税税率6%,增值税税额51800.04元。当合同约定的税率与国家税法规定及税务机关认定的税率不一致时，以国家税法规定及税务机关认定的税率为准进行调整，调整时以不含税价为基准，执行国家法规规定及税务机关规定的税率。', '2020-10-12', NULL, NULL, '2', NULL, 7, '2020-08-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413483397121', 'HT2022C023', 'A238YK-2022-CH01', '雅砻江楞古水电站预可研阶段（重编）测绘技术服务合同', NULL, '0231', 246000.00, NULL, NULL, 22, '2022-05-05', '       经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币246000.00   元（大写：人民币贰拾肆万陆仟元整），适用增值税率为 6 %。其中不含税价为232100.00元（大写：人民币贰拾叁万贰仟元整），增值税为 13900.00 元（大写：人民币壹万叁仟玖佰元整）。\n      本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。除本合同另有约定外，此合同总价承包不予调整。', '2022-05-10', NULL, NULL, '2', NULL, 7, '2022-05-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413500174338', 'HT2022W019', NULL, '云南省国道G213桧溪至黄华丫口段公路航空摄影及1：2000地形图测绘技术服务合同', NULL, '0076', 263000.00, NULL, NULL, 22, '2022-03-15', '经甲乙双方协商一致，本合同采用单价承包模式，合同预估总金额为&yen;263000.00元（大写：贰拾陆万叁仟元整）。本合同单价已包括为完成工作所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金（税率6%）等全部费用。', '2022-03-20', NULL, NULL, '2', '已阅', 7, '2022-03-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413512757249', 'CMC1：A-22043', NULL, '孟底沟水电站场内交通左岸、右岸公路工程项目施工图测量合同', NULL, '0229', 269000.00, NULL, NULL, 22, '2022-08-04', '双方约定，合同总金额为人民币269000.00元（大写： 贰拾陆万玖仟元整）。不含税合同金额为人民币253773.58元（大写：贰拾伍万叁仟柒佰柒拾叁元伍角捌分）；增值税税率为 6 %，增值税税额为人民币15226.42元（大写：壹万伍仟贰佰贰拾陆元肆角贰分）。\n本合同采用综合计价模式。“合同工程量清单价格表”中没有规定的收费项目，除本合同另有说明，均视为乙方已将该费用摊入工程量清单单价或总价项目中，甲方不再另行支付任何费用。', NULL, NULL, NULL, '2', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413584060417', 'CMC1：A-22030', 'A410SG-2022-CH01', '硬梁包电站扯索坝和二里坝桥测绘技术服务合同', NULL, '0231', 85000.00, NULL, NULL, 22, '2022-05-25', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币85000.00   元（大写：人民币捌万伍仟元），适用增值税率为 6 %。其中不含税价为80188.68元（大写：人民币捌万零壹佰捌拾捌元陆角捌分），增值税为 4811.32元（大写：人民币肆仟捌佰壹拾壹元叁角贰分）。', '2022-05-30', NULL, NULL, '2', NULL, 7, '2022-05-26', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413651169282', 'HT2022C011', NULL, '猴子岩水电站焦子坪等移民工程变更设计项目地形图测绘技术服务合同', NULL, '0227', 235000.00, NULL, NULL, 22, '2022-01-13', '本合同不含税价格为人民币221698.11元，适用增值税税率6%，税费为人民币13301.89元，故本合同含税总价为人民币235000.00元（大写：人民币贰拾叁万伍仟元）。各项费用组成详见《工程量清单及报价明细表》。本合同含税总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用（包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）。', '2022-01-19', NULL, NULL, '2', NULL, 7, '2022-01-14', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413667946498', 'CMC1：A-22054', NULL, '长河坝水电站移民安置工程牛棚子沟泥石流治理等项目地形图测绘技术服务合同', NULL, '0227', 54000.00, NULL, NULL, 22, '2022-11-22', '本合同不含税价为人民币50943.40元，适用增值税税率6%，税费为人民币3056.60元，故本合同含税总价为&yen;54000.00元（大写：人民币伍万肆仟元整）。本合同不含税总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2022-11-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413751832578', 'CMC1：A-22060', NULL, '溪洛渡水电站云南库区新增影响区实物指标调查配合测量技术服务合同', NULL, '0227', 410000.00, NULL, NULL, 22, '2022-12-20', '本合同不含税价格为&yen;386792.45元（大写：人民币叁拾捌万陆仟柒佰玖拾贰元肆角伍分），适用增值税税率6%，税费为&yen;23207.55元（大写：人民币贰万叁仟贰佰零柒元伍角伍分），故本合同含税总价为&yen;410000.00元（大写：人民币肆拾壹万元整）。本合同不含税价格为固定不变价格，增值税如遇国家有关税收规定调整做相应调整，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）。', NULL, NULL, NULL, '2', '已核', 7, '2022-12-29', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413860884481', 'HT2021W059', 'YLDC-ETC-ZD2021009', '雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测合同文件', NULL, '0200', 2530350.00, NULL, NULL, 22, '2021-11-17', '本合同的合同总金额为人民币（大写）：贰佰陆拾叁万零叁佰伍拾元整（￥2,630,350.00元），其构成详见本合同《合同价格表》。\n注：合同备用金10万元整。', '2021-11-21', NULL, NULL, '2', NULL, 7, '2021-11-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413877661698', 'HT2022C025', 'CD2C20220542', '宁南果木二期风电项目地形图测绘工作技术服务合同', NULL, '0238', 87600.00, NULL, NULL, 22, '2022-05-11', '本合同总价为人民币87600元（大写：捌万柒仟陆佰元整）（含增值税，税率6%，不含税金额为82641.5094元），具体价格构成详见《项目经费组成表》（附件1）。本合同总价为固定不变价格，包括乙方提供本合同范围内所有技术服务所需的全部费用。', '2022-05-18', NULL, NULL, '2', NULL, 7, '2022-05-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413894438914', 'CMC1：A-22049', NULL, '彭州市2021年汛期灾损省县道隐患整治工程（一期）可行性研究报告、详细勘察、初步设计及概算编制服务采购项', NULL, '0229', 43000.00, NULL, NULL, 22, '2022-10-20', '双方约定，合同总金额为人民币4.30万元（大写： 肆万叁仟 元整）。不含税合同金额为人民币4.056604万元（大写：肆万零伍佰陆拾陆元零肆分）；增值税税率为 6 %，增值税税额为人民币0.243396万元（大写：贰仟肆佰叁拾叁元玖角陆分）。\n本合同为固定总价合同，除本合同另有说明，甲方不再另行支付任何费用。', NULL, NULL, NULL, '0', '已阅', 7, '2023-07-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413911216130', 'HT2022C016', 'A418SG-2022-01', '老木孔航电枢纽工程航道测绘技术服务合同', NULL, '0231', 738500.00, NULL, NULL, 22, '2022-03-03', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总费用为人民币小写：73.85万元（大写：柒拾叁万捌仟伍佰整）。其中：不含税金额为69.67万元（大写：陆拾玖万陆仟柒佰元整），税额为4.18万元（大写：肆万壹仟捌佰元整）。（增值税6%）\n本合同单价已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润等全部费用。', '2022-03-08', NULL, NULL, '2', NULL, 7, '2022-03-04', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881413927993346', 'HT2022W025', NULL, '黄河干流若尔盖段应急处置（抢险救灾）工程工程测量和勘察技术服务技术服务合同', NULL, '0090', 750000.00, NULL, NULL, 22, '2022-05-05', '1、技术服务费总额：\n经甲乙双方协商一致，本合同采用固定总价承包模式，合同金额为&yen;750000.00元（大写：柒拾伍万元整）。本合同总价已包括为完成工作所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、保险、利润及税金（税率6%）等全部费用。', '2022-05-20', NULL, NULL, '2', NULL, 7, '2022-05-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414066405378', 'HT2021W036', NULL, '文殊坊周边环境综合提升工程测绘项目技术服务合同', NULL, '0021', 95000.00, NULL, NULL, 22, '2021-08-10', '经双方友好协商，文殊坊周边环境综合提升工程测绘项目采用总价承包方式，合\n同总价为：￥95000.00 元（大写：玖万伍仟元整）。\n以上费用包干使用，即已包含作业费、规费、利润、税金（税率 6%）、管理费、\n安全生产投入及文明施工措施费等所有费用费等所有费用。', '2021-08-12', NULL, NULL, '2', NULL, 7, '2021-08-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414066405379', 'HT2022W024', NULL, '重庆轨道交通4号线西延伸段（一标段）土建2标、土建5标出入段线第三方监测劳务合同协议书', NULL, '0275', 2400000.00, NULL, NULL, 22, '2021-12-01', '三、合同价款及支付\n3.1本合同为总价包干合同，合同总价为人民币：2400000.00元（大写：贰佰肆拾万元整）', '2021-12-06', NULL, NULL, '2', NULL, 7, '2021-12-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414116737025', 'HT2021W060', NULL, '理塘县河源水电开发有限公司确如多水电站渣场及石料场1:1000地形图测绘技术服务合同', NULL, '0102', 73171.39, NULL, NULL, 22, '2021-12-13', '本合同签约价（含税）为￥ 73171.39元（大写：人民币 柒万叁仟壹佰柒拾壹元叁角玖分）。\n其中不含税金额为￥69029.61元（大写：人民币柒万玖仟零贰拾玖元陆角壹分），税金（税率：6%）为￥4141.78元（大写：人民币肆仟壹佰肆拾壹元柒角捌分）。\n本合同签约价为乙方完成合同规定的全部工作内容的一切费用（包括但不限于专用技术使用费、技术转让或技术支持费、包装费、劳务费、安全生产费、保险费、食宿费、交通费、差旅费、管理费、税费、运杂费、利润、成交服务费、不可预见费）。费用组成详见附件《费用明细表》。', '2021-12-15', NULL, NULL, '2', NULL, 7, '2021-12-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414192234498', 'CMC1：A-23019', NULL, '四川省鲜水河3#抽水蓄能电站预可研测绘技术服务合同', NULL, '0233', 117372.56, NULL, NULL, 22, '2023-03-20', '本合同采用总价承包方式，本合同暂定总价（含增值税）为：￥117372.56 元（大写：壹拾壹万柒仟叁佰柒拾贰元伍角陆分），6%增值税金为：￥6643.73 （大写：陆仟陆佰肆拾叁元柒角叁分）。合同若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '同意。', 10, '2023-03-20', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414234177537', 'CMC1：A-22058', NULL, '芦山县河道治理工程地形图测绘项目合同', NULL, '0227', 91000.00, NULL, NULL, 22, '2022-12-15', '本工程以双方签订的《芦山县河道治理工程地形图测绘合同》为依据，采用总价承包模式。乙方完成所有测绘工作的技术服务费总金额为人民币￥91000元（大写：玖万壹仟元整）。“合同工程量清单价格表”中没有规定的收费项目，除本合同另有说明，均视为乙方已将该费用摊入工程量清单单价项目中，甲方不再另行支付任何费用。', NULL, NULL, NULL, '2', '已核', 7, '2022-12-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414259343361', 'CMC1：A-23017', NULL, '四川省甘孜抽水蓄能电站预可研测绘技术服务合同', NULL, '0233', 183840.79, NULL, NULL, 22, '2023-03-20', '本合同采用总价承包方式，本合同暂定总价（含增值税）为：￥183840.79元（大写：壹拾捌万叁仟捌佰肆拾元柒角玖分），6%增值税金为：￥10406.08（大写：壹万零肆佰零陆元零捌分）。合同若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '同意。', 10, '2023-03-20', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414276120578', 'CMC1：A-23015', NULL, '四川省白玉县抽水蓄能电站预可研测绘技术服务合同', NULL, '0233', 153764.71, NULL, NULL, 22, '2023-03-20', '本合同采用总价承包方式，本合同暂定总价（含增值税）为：￥153764.71  元（大写：壹拾伍万叁仟柒佰陆拾肆元柒角壹分，6%增值税金为：￥8703.66 （大写：捌仟柒佰零叁元陆角陆分）。合同若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '同意。', 10, '2023-03-20', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414292897793', 'CMC1：A-23018', NULL, '四川省金川抽水蓄能电站预可研测绘技术服务合同', NULL, '0233', 107839.04, NULL, NULL, 22, '2023-03-20', '本合同采用总价承包方式，本合同暂定总价（含增值税）为：￥107839.04  元（大写：壹拾万零柒仟捌佰叁拾玖元零肆分），6%增值税金为：￥6104.10 （大写：陆仟壹佰零肆元壹角整）。合同若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '同意。', 10, '2023-03-20', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414355812353', 'CMC1：A-23046', NULL, '田湾河外部供水地形图测绘技术服务合同', NULL, '0227', 44388.00, NULL, NULL, 22, '2023-07-17', '本合同为单价合同，暂定合同总价为人民币44388.00元（大写肆万肆仟叁佰捌拾捌元整），其中：不含税价款为人民币41875.47元（大写肆万壹仟捌佰柒拾伍元肆角柒分），适用增值税税率6%，税费为人民币2512.53元（大写贰仟伍佰壹拾贰元伍角叁分）。', NULL, NULL, NULL, '2', '已核', 7, '2023-07-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414389366785', 'CMC1：A-22040', 'NZK21309-2022-CH-01', '易贡藏布亚龙水电站预可研阶段测绘技术服务合同', NULL, '0231', 825100.00, NULL, NULL, 22, '2022-07-06', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币825100.00元（大写：人民币捌拾贰万伍仟壹佰元整），适用增值税率为 6 %。其中不含税价为778396.23元（大写：人民币柒拾柒万捌仟叁佰玖拾陆元贰角叁分），增值税为46703.77元（大写：人民币肆万陆仟柒佰零叁元柒角柒分）。', '2022-07-12', NULL, NULL, '2', NULL, 7, '2022-07-07', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414473252866', 'HT2022C006', NULL, '长河坝水电站移民安置工程变更设计项目地形图测绘技术服务合同', NULL, '0227', 233000.00, NULL, NULL, 22, '2022-01-11', '6.1 合同总价\n本合同不含税价格为人民币219811.32元，适用增值税税率6%，税费为人民币13188.68元，故本合同含税总价为人民币233000.00元（大写：人民币贰拾叁万叁仟佰元整）。各项费用组成详见《工程量清单及报价明细表》。本合同含税总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用（包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）。', '2022-01-19', NULL, NULL, '2', NULL, 7, '2022-01-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414511001602', 'HT2021C045', NULL, '金沙江波罗水电站白格滑坡测绘技术服务合同', NULL, '0231', 124200.00, NULL, NULL, 22, '2021-11-25', '经甲、乙双方协商，本合同采用总价承包计价方式，合同费用为人民币小写：124200.00元（大写：壹拾贰万肆仟贰佰元整）。不含税金额为117200.00元（大写：壹拾壹万柒仟贰佰元整），税额为7000.00元（大写：柒仟元整）。', '2021-11-30', NULL, NULL, '2', NULL, 7, '2021-11-30', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414527778817', 'CMC1：A-21048', 'A418CB-21-02', '岷江老木孔航电枢纽工程施工测量控制网测绘技术服务合同', NULL, '0231', 222200.00, NULL, NULL, 22, '2021-11-09', '10.1 合同价格\n      经甲、乙双方协商，本合同采用总价承包计价方式，合同费用为人民币小写：222200.00元（大写：贰拾贰万贰仟贰佰元整）。不含税金额为209600.00元（大写：贰拾万零玖仟陆佰元整），税额为12600.00元（大写：壹万贰仟陆佰元整）。\n      本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。\n10.3 质量保证金\n      本合同不扣减质量保证金（承包人承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', '2021-11-15', NULL, NULL, '2', NULL, 7, '2021-11-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414544556034', 'HT2021W045', '邻政采[2021]145号', '邻水县重点区域自然资源统一确权登记服务政府采购合同', NULL, '0108', 1590000.00, NULL, NULL, 22, '2021-10-08', '本合同为中标合同，中标价格为￥1590000.00元，大写：人民币壹佰伍拾玖万元整。本项目合同费用包括完成本项目所涉及人员劳务、差旅、设备投入、交通费、利润、保险、风险、税金、招标代理服务费、测绘产品质量检验机构检验费、专家费、会务费以及配合国家、省、市自然资源确权等的一切费用。', '2021-10-15', NULL, NULL, '2', NULL, 7, '2021-10-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414582304770', 'CMC2：A-22017', NULL, '白河干流唐克镇段护岸工程测绘技术服务合同', NULL, '0158', 847000.00, NULL, NULL, 22, '2022-06-01', '经双方协商，本项目实行合同包干价，金额为人民币小写： 84.70 万元，（大写：捌拾肆万柒仟元整）；其中增值税税率为 6% 。', '2022-06-05', NULL, NULL, '2', '同意', 7, '2022-06-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414603276289', 'HT2021W049', 'SGXZLSFD00SJJS2100132', '国网西藏拉萨发电公司2021年羊湖电站第八期压力钢管永久变形监测网校核技术服务合同', NULL, '0085', 899000.00, NULL, NULL, 22, '2021-10-08', '5.1 技术服务报酬总额为：人民币（大写） 捌拾玖万玖仟元整 （&yen; 899000.00 ）（含税），其中，不含税价人民币 捌拾肆万捌仟 壹佰壹拾叁元贰角壹分 （大写）（&yen; 848113.21 ），增值税税率 6 %，增值税税额 50886.79 元。当合同约定的税率与国家税法规定及税务机关认定的税率不一致时，以国家税法规定及税务机关认定的税率为准进行调整，调整时以不含税价为基准，执行国家法规规定 及税务机关规定的税率。 该报酬包含乙方履行本合同所需全部费用，包括但不限于员工工 资、加班费、咨询费、资料费、交通费、食宿费以及税费等。', '2021-10-15', NULL, NULL, '2', NULL, 7, '2021-10-08', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414641025025', 'CMC1：A-22039', 'A510GH-2022-CH01', 'ML水库电站及JW梯级水电站测绘技术服务合同', NULL, '0231', 29863287.00, NULL, NULL, 22, '2022-07-04', '经甲、乙双方协商，本合同采用单价承包计价方式，合同总金额暂定为人民币29863287.00元（大写：贰仟玖佰捌拾陆万叁仟贰佰捌拾柒元整）。其中，合同不含税金额为28172912.26元（大写：贰仟捌佰壹拾柒万贰仟玖佰壹拾贰元贰角陆分），税金（6%增值税）1690374.74元（大写壹佰陆拾玖万零叁佰柒拾肆元柒角肆分）。\n本合同费用分JW梯级水电站项目、ML水库电站项目按进度款、结算款、质保金返还的方式进行支付，支付批次共计6次，费用支付需提出拟支付款项的书面申请及合格的增值税专用发票。\n本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润等全部费用。除本合同另有约定外，此合同单价承包不予调整。', '2022-07-19', NULL, NULL, '2', NULL, 7, '2022-07-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414674579458', 'HT2022C003', 'CD2C20220029', '老鹰岩一级水电站迁建企业新址、什月河地形图测绘技术服务合同', NULL, '0227', 230000.00, NULL, NULL, 22, '2022-01-10', '6.1 合同总价\n本合同不含税价格为人民币 216981.13元，适用增值税税率 6 %，税费为人民币 13018.87元，故本合同含税总价为人民币 230000.00元（大写：贰拾叁万元整）。本合同不含税总价为固定不变价格，包括乙方提供本合同范围内所有技术服务所需的全部费用（包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）。', '2022-01-12', NULL, NULL, '2', '已核', 7, '2022-01-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414695550978', 'HT2022C015', 'CD2C20220177', '波罗水电站移民工程地形地类测绘配合项目技术服务合同', NULL, '0227', 1810000.00, NULL, NULL, 22, '2022-02-11', '本合同不含税价格为人民币1707547.17元，适用增值税税率6%，税费为人民币102452.83元，故本合同含税总价为人民币1810000.00元（大写：人民币壹佰捌拾壹万元整）。各项费用组成详见《工程量清单及报价明细表》。本合同含税总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）。', '2022-02-15', NULL, NULL, '2', NULL, 7, '2022-02-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414750076930', 'HT2021C036', NULL, '紫霞水电站界桩测设技术服务合同', NULL, '0227', 1150000.00, NULL, NULL, 22, '2021-08-03', '本合同不含税价格为人民币1084905.66元，适用增值税税率 6 %，税费为人民币65094.34元，故本合同含税总价为人民币115万元（大写：壹佰壹拾伍万元整）。本合同不含税总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', '2021-08-20', NULL, NULL, '2', NULL, 7, '2021-08-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414775242753', 'CMC1：A-22045', NULL, '金沙江波罗水电站昌都市农田灌溉地形图测绘技术服务合同', NULL, '0227', 229500.00, NULL, NULL, 22, '2022-08-23', '本合同价格为￥21.65万元，适用增值税税率6%，税费为￥1.30万元，本合同总价为￥22.95万元（大写：人民币贰拾贰万玖仟伍佰圆整），本合同价格为固定不变价格，增值税税额如遇国家有关税收规定调整做相应调整。', NULL, NULL, NULL, '2', NULL, 7, '2022-08-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414859128834', 'HT2022C014', 'NZK20209-22-02', '大渡河老鹰岩一、二级水电站上下游河道航拍及后期视频制作测绘技术服务合同', NULL, '0231', 47900.00, NULL, NULL, 22, '2022-02-11', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币小写：47900.00元（大写：肆万柒仟玖佰元整）。不含税金额为45188.68元（大写：肆万伍仟壹佰捌拾捌元陆角捌分），税额为2711.32元（大写：贰仟柒佰壹拾壹元叁角贰分）。\n本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。除本合同另有约定外，此合同总价承包不予调整。', '2022-02-17', NULL, NULL, '2', NULL, 7, '2022-02-11', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414880100353', 'HT2021C046', 'LXSH2110-21-01', '四川省洪涝灾害应急处置项目测绘技术服务合同', NULL, '0231', 207200.00, NULL, NULL, 22, '2021-11-29', '经甲、乙双方协商，本合同采用总价承包计价方式，合同预计费用为人民币小写：207200.00元（大写：贰拾万柒仟贰佰元整）。不含税金额为195500.00元（大写：壹拾玖万伍仟伍佰元整），税额为11700.00元（大写：壹万壹柒佰元整）。', '2021-12-10', NULL, NULL, '2', NULL, 7, '2021-11-30', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881414905266178', 'HT2022C001', NULL, '川藏铁路泸定段征地拆迁安置华电泸定公司业主营地及武警泸定中队地形图测绘技术服务合同', NULL, '0227', 55300.00, NULL, NULL, 22, '2022-01-04', '本合同不含税价格为人民币52169.81元，适用增值税税率6%，税费为人民币3130.19元，故本合同含税总价为人民币55300.00元（大写：伍万伍仟叁佰元整）。', '2022-01-07', NULL, NULL, '2', NULL, 7, '2022-01-07', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415001735169', 'HT2022C024', 'CD2C20220485', '溪洛渡水电站云南库区新增影响区实物指标调查配合测量和地形图测绘技术服务合同', NULL, '0227', 243000.00, NULL, NULL, 22, '2022-04-26', '本合同不含税价格为&yen;229245.00元（大写：人民币贰拾贰万玖仟贰佰肆拾伍元整），适用增值税税率6%，税费为&yen;13755.00元（大写：人民币壹万叁仟柒佰伍拾伍元整），故本合同含税总价为&yen;243000.00元（大写：人民币贰拾肆万叁仟元整）。各项费用组成详见《工程量清单及报价明细表》。本合同不含税价格为固定不变价格，增值税如遇国家有关税收规定调整做相应调整，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）。', '2022-05-26', NULL, NULL, '2', NULL, 7, '2022-05-26', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415026900993', 'HT2021W034', '511129202100018', '沐川县林权登记数据整合建库采购项目采购合同', NULL, '0114', 3800000.00, NULL, NULL, 22, '2021-08-01', NULL, '2021-08-31', NULL, NULL, '2', NULL, 7, '2021-08-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415047872514', 'CMC1：A-23016', NULL, '四川省道孚县抽水蓄能电站预可研测绘技术服务合同', NULL, '0233', 463292.62, NULL, NULL, 22, '2023-03-20', '本合同采用总价承包方式，本合同暂定总价（含增值税）为：￥463292.62元（大写：肆拾陆万叁仟贰佰玖拾贰元陆角贰分，6%增值税金为：￥26224.11（大写：贰万陆仟贰佰贰拾肆元壹角壹分）。合同若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '同意。', 10, '2023-03-20', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415240810497', 'HT2021C042', NULL, '孟底沟水电站伍须海—上团乡—孟底沟通乡通村公路改建工程及7号公路施工图测绘服务项目合同', NULL, '0229', 311900.00, NULL, NULL, 22, '2021-10-11', '双方约定，本合同为固定总价合同，合同总金额为人民币 31.19万元（大写： 叁拾壹万壹仟玖佰 元整，含增值税），其中增值税税率为 6 %，增值税税额为人民币 1.7652 万元（大写： 壹万柒仟陆佰伍拾贰 元整），合同不含税金额为人民币 29.4248 万元（大写： 贰拾玖万肆仟贰佰肆拾捌 元整）。本合同价包含合同范围内所有技术服务所需的全部费用，若超出工程量以外部分不另行计量与支付。', '2021-10-18', NULL, NULL, '2', NULL, 7, '2021-10-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415265976322', 'CMC1：A-23020', NULL, '四川省攀枝花抽水蓄能电站预可研测绘技术服务合同', NULL, '0233', 120581.52, NULL, NULL, 22, '2023-03-20', '本合同采用总价承包方式，本合同暂定总价（含增值税）为：￥120581.52元（大写：壹拾贰万零伍佰捌拾壹元伍角贰分，6%增值税金为：￥6825.37（大写：陆仟捌佰贰拾伍元叁角柒分）。合同若遇国家增值税政策调整，则增值税发票税率按照国家最新政策执行，以合同不含税价不变的原则对未结算部分合同价进行调整。', NULL, NULL, NULL, '2', '同意。', 10, '2023-03-20', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415286947841', 'HT2021C043', 'A186KX-21-04', '雅砻江牙根二级水电站预可研阶段测绘技术服务合同（A186KX-21-04）', NULL, '0231', 227100.00, NULL, NULL, 22, '2021-11-22', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币22.71万元（大写：贰拾贰万柒仟壹佰元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。除本合同另有约定外，此合同总价承包不予调整。', '2021-11-25', NULL, NULL, '2', NULL, 7, '2021-11-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415349862402', 'HT2020W079', NULL, '泸县自然资源（九曲河）确权登记项目政府采购合同', NULL, '0111', 99643.50, NULL, NULL, 22, '2020-11-03', '该合同总价为包干价，合同总价为人民币大写：玖万玖仟陆佰肆拾叁元五角，即RMB￥99643.50元。', '2020-11-10', NULL, NULL, '2', NULL, 7, '2020-11-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415362445314', 'HT2021W003', '5105212021000027', '泸县2020年度国土变更调查采购合同', NULL, '0111', 1365000.00, NULL, NULL, 22, '2021-02-01', '1.结算根据最终数据库中举证图斑结算，举证图斑以100元/图斑结算，如结算金额大于中标价，以中标价结算，如结束金额小于中标价，以最终举证图斑数量结算，所有相关数据整合、数据分析、数据库建设等工作需按部、省安排开展，不做另行结算。\n2.付款方式：①按照部、省要求开展工作，成果经过部、省审查验收合格后支付80%；②成果经过部、省审查验收合格一年后支付20%。', '2021-02-05', NULL, NULL, '2', NULL, 7, '2021-02-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415375028225', 'CMC1：A-22041', NULL, '雅砻江色戈光伏发电项目地形图测绘技术服务合同', NULL, '0238', 72000.00, NULL, NULL, 22, '2022-07-18', '本合同不含税价格为人民币 67924.528 元，适用增值税税率 6 %，税费为人民币 4075.472 元，故本合同总价为人民币 72000 元（大写：柒万贰仟元整）。本合同总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', '2022-07-25', NULL, NULL, '2', '同意', 7, '2022-07-26', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415412776962', 'HT2021C035', NULL, '岷江老木孔航电枢纽工程施工阶段测绘技术服务合同', NULL, '0231', 768500.00, NULL, NULL, 22, '2021-08-20', '经甲、乙双方协商，本合同采用总额控制单价承包计价方式，合同费用预计约为人民币小写：768500.00元（大写：柒拾陆万捌仟伍佰元整）。', '2021-08-27', NULL, NULL, '2', NULL, 7, '2021-08-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415429554178', 'HT2022C021', NULL, '雅江县沙学村码头、瓦孜村对外连接道路、昆地防护工程地形图测绘技术服务合同', NULL, '0227', 242000.00, NULL, NULL, 22, '2022-03-15', '经双方友好协商，基于本合同第1章表1工作内容，本合同价格采用总价包干模式。本合同价格为人民币￥228301.89元（大写：贰拾贰万捌仟叁佰零壹元捌角玖分），适用增值税税率6%，税费为人民币￥13698.11元（大写：壹万叁仟陆佰玖拾捌元壹角壹分），本合同总价为人民币￥242000.00元（大写：贰拾肆万贰仟元整），本合同价格为固定不变价格，增值税税额如遇国家有关税收规定调整做相应调整。', '2022-04-19', NULL, NULL, '2', NULL, 7, '2022-04-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415446331394', 'HT2021C033', 'NZK184-21-01', '雅砻江官地电力生产项目设计服务测绘技术服务合同（打罗沟、金打公路K6+750、西侧沟泥石流治理）', NULL, '0231', 70000.00, NULL, NULL, 22, '2021-07-19', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币大写：柒万元整（小写：70000.00元）。', '2021-07-28', NULL, NULL, '2', NULL, 7, '2021-07-21', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415475691522', 'HT2021W040', NULL, '成彭路前期方案研究项目航测工作技术服务合同', NULL, '0022', 194000.00, NULL, NULL, 22, '2021-09-06', '经甲、乙双方协商，本工程采用固定总价承包方式。合同总金额为：￥194000.00（大写：人民币壹拾玖万肆仟元整）。此费用包含了乙方为完成本合同约定的技术服务项目所发生的人工、管理费、利润以及相关税费等所有费用。', '2021-09-10', NULL, NULL, '2', NULL, 7, '2021-09-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415492468738', 'HT2021W021', NULL, '理塘县河源水电开发有限公司确如多水电站工程施工测量控制网测绘技术服务合同', NULL, '0102', 380485.41, NULL, NULL, 22, '2021-08-02', '本合同签约价（含税）为￥ 380485.41 元（大写：人民币 叁拾捌万零肆佰捌拾伍元肆角壹分  ）。其中不含税金额为￥ 358948.5        元（大写：人民币  叁拾伍万捌仟玖佰肆拾捌元伍角整  ），税金（税率：6%）为￥ 21536.91 元（大写：人民币 贰万壹仟伍佰叁拾陆元玖角壹分  ）。', '2021-08-05', NULL, NULL, '2', NULL, 7, '2021-08-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415567966210', 'HT2021C037', 'A228SG-21-01', '金沙江叶巴滩水电站施工阶段降曲河地形图测绘技术服务合同', NULL, '0231', 240000.00, NULL, NULL, 22, '2021-08-13', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币小写：24.00万元（大写：贰拾肆万元整）。', '2021-08-20', NULL, NULL, '2', NULL, 7, '2021-08-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415630880769', 'HT2022C004', 'CD2C20220028', '老鹰岩二级水电站垫高防护区地形图测绘及老鹰岩至龙头石沿河道航拍视频拍摄技术服务合同', NULL, '0227', 125000.00, NULL, NULL, 22, '2022-01-10', '6.1 合同总价\n本合同不含税价格为人民币 117924.53元，适用增值税税率 6 %，税费为人民币 7075.47元，故本合同含税总价为人民币 125000.00元（大写：壹拾贰万伍仟元整）。本合同不含税总价为固定不变价格，包括乙方提供本合同范围内所有技术服务所需的全部费用（包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）。', '2022-01-12', NULL, NULL, '2', NULL, 7, '2022-01-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415668629506', 'HT2022C002', NULL, '大渡河老鹰岩一级水电站礼约河地形图测绘技术服务合同', NULL, '0231', 107800.00, NULL, NULL, 22, '2022-01-04', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币小写：107800.00元（大写：壹拾万零柒仟捌佰元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。', '2022-01-06', NULL, NULL, '2', NULL, 7, '2022-01-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415685406721', 'HT2021C025', 'NZK20249-21-01', '涪江双江航电枢纽工程技施阶段测绘技术服务合同', NULL, '0231', 82840.47, NULL, NULL, 22, '2021-06-11', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币82840.47  元（大写：捌万贰仟捌佰肆拾元肆角柒分整）。', '2021-06-23', NULL, NULL, '2', NULL, 7, '2021-06-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415727349761', 'HT2021C024', 'NZK460-21-02', '大渡河龚铜两站电力生产项目设计咨询服务测绘技术服务合同', NULL, '0231', 79184.88, NULL, NULL, 22, '2021-06-11', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币79184.88元（大写：柒万玖仟壹佰捌拾肆元捌角捌分整）。', '2021-06-16', NULL, NULL, '2', NULL, 7, '2021-06-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415781875714', 'HT2021W019', NULL, '卡基娃水电站升压站1:500地形图测绘工作技术服务合同', NULL, '0102', 51516.00, NULL, NULL, 22, '2021-05-06', NULL, '2021-05-10', NULL, NULL, '2', NULL, 7, '2021-05-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415798652929', 'HT2021C044', 'A186KX-21-05', '雅砻江牙根二级水电站预可研阶段测绘技术服务合同A186KX-21-05', NULL, '0231', 176100.00, NULL, NULL, 22, '2021-11-22', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币17.61万元（大写：壹拾柒万陆仟壹佰元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。除本合同另有约定外，此合同总价承包不予调整。', '2021-11-25', NULL, NULL, '2', NULL, 7, '2021-11-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415815430146', 'CMC1：A-21020', 'CD2C20221154', '重庆轨道交通4号线西延伸段工程施工监测及控制测量技术服务采购项目技术服务合同', NULL, '0233', 7605000.00, NULL, NULL, 22, '2022-09-15', '本工程收费参照国家规定的收费标准，经甲乙双方友好协商，工程合同总价为本合同含税总价为人民币：7605000.00元（大写：柒佰陆拾万零伍仟元整），其中安全措施费为：140677.03元（大写：拾肆万零陆佰柒拾柒元叁分），增值税率为6%，税金为：430471.70元（大写：肆拾叁万零肆佰柒拾壹元柒角零分）。', NULL, NULL, NULL, '2', NULL, 7, '2022-09-21', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415861567490', 'HT2022C017', 'CD2C20220242', '双江口水电站集中安置点、寺院等地形图测绘项目技术服务合同', NULL, '0227', 203500.00, NULL, NULL, 22, '2022-03-01', '本合同不含税价格为人民币 191981.13元，适用增值税税率 6 %，税费为人民币 11518.87元，故本合同含税总价为人民币203500.00元（大写：贰拾万叁仟伍佰元整）。本合同不含税总价为固定不变价格，包括乙方提供本合同范围内所有技术服务所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。', '2022-03-03', NULL, NULL, '2', NULL, 7, '2022-03-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415895121921', 'HT2021C019', 'NZK20209-21-02', '大渡河老鹰岩一级水电站水库淹没区影响区建设征地界桩测绘技术服务合同', NULL, '0231', 407227.00, NULL, NULL, 22, '2021-07-01', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币小写：407227.00元（大写：肆拾万柒仟贰佰贰拾柒元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。除本合同另有约定外，此合同总价承包不予调整。', '2021-07-07', NULL, NULL, '2', NULL, 7, '2021-07-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415911899138', 'HT2021C018', 'NZK20210-21-02', '大渡河老鹰岩二级水电站水库淹没区影响区建设征地界桩测绘技术服务合同', NULL, '0231', 556130.00, NULL, NULL, 22, '2021-07-01', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币小写：556130.00元（大写：伍拾伍万陆仟壹佰叁拾元整）。', '2021-07-07', NULL, NULL, '2', NULL, 7, '2021-07-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415932870657', 'CMC1：A-22053', NULL, '黄金坪水电站孙家沟实物指标配合测量技术服务合同', NULL, '0227', 32000.00, NULL, NULL, 22, '2022-11-22', '本合同不含税价为人民币30188.68元，适用增值税税率6%，税费为人民币1811.32元，故本合同含税总价为&yen;32000.00元（大写：叁万贰仟元整）。本合同不含税总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2022-11-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881415962230785', 'HT2021C032', NULL, '孟底沟水电站前期实施项目沿江道路【K0+000.00~K9+688.00段】、1#公路【K4+220.00~K5+521.88段】、5#公路【', NULL, '0229', 227350.00, NULL, NULL, 22, '2021-06-10', NULL, '2021-07-02', NULL, NULL, '2', NULL, 7, '2021-06-14', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416029339649', 'HT2021C023', 'A359SG-21-01', '绰斯甲水电站技施阶段测绘技术服务合同', NULL, '0231', 598000.00, NULL, NULL, 22, '2021-05-25', '经甲、乙双方协商，本合同采用单价承包方式，预计合同金额为人民币598000.00元（大写：伍拾玖万捌仟元整）。', '2021-05-28', NULL, NULL, '2', NULL, 7, '2021-05-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416163557378', 'CMC1：A-22033', 'A237KX-2022-CH01', '孟底沟水电站可研阶段测绘技术服务合同', NULL, '0231', 89800.00, NULL, NULL, 22, '2022-05-18', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币89800.00   元（大写：人民币捌万玖仟捌佰元整），适用增值税率为 6 %。其中不含税价为84716.98元（大写：人民币捌万肆仟柒佰壹拾陆元玖角捌分），增值税为 5083.02 元（大写：人民币伍仟零捌拾叁元零二分）。', '2022-05-25', NULL, NULL, '2', NULL, 7, '2022-05-19', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416213889025', 'HT2022C022', 'A484GH-2022-01', 'ML水库电站规划加深阶段测绘技术服务合同', NULL, '0231', 16485800.00, NULL, NULL, 22, '2022-04-27', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币16485800.00元（大写：壹仟陆佰肆拾捌万伍仟捌佰元整）。不含税金额为15552641.51元（大写：壹仟伍佰伍拾伍万贰仟陆佰肆拾壹元伍角壹分），税额为933158.49元（大写：玖拾叁万叁仟壹佰伍拾捌元肆角玖分）。\n本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。货币工作量总价在合同总价基础上增加或减少5%的范围内，此合同总价不予调整。\n计划工期：（1）合同签订日期第二日起算，25日历天内完成外业工作；\n         （2）外业工作完成后15日历天内完成全部内业，并提交所有正式成果 资料。', '2022-05-06', NULL, NULL, '2', '已阅', 7, '2022-04-29', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416226471938', 'HT2022C007', NULL, '猴子岩水电站泥洛河坝、菩提河坝安置点及格宗土地开发整理工程变更设计项目地形图测绘技术服务合同', NULL, '0227', 231000.00, NULL, NULL, 22, '2022-02-09', '本合同不含税价格为人民币217924.53元，适用增值税税率6%，税费为人民币13075.47元，故本合同含税总价为人民币231000.00元（大写：人民币贰拾叁万壹仟元整）。各项费用组成详见《工程量清单及报价明细表》。本合同含税总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用（包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）。', '2022-02-15', NULL, NULL, '2', NULL, 7, '2022-02-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416243249154', 'HT2021W016', NULL, '四川省石棉县新民乡足富大理石矿勘查测量技术服务合同', NULL, '0174', 85000.00, NULL, NULL, 22, '2021-04-01', '合同总价：￥85000.00元（大写：捌万伍仟元整）。\n以上费用包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费等所有费用。', '2021-04-08', NULL, NULL, '2', NULL, 7, '2021-04-05', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416260026369', 'HT2022C018', NULL, 'CZTL康定段拆迁安置三道桥、水桥、升航安置点地形图测绘合同', NULL, '0227', 214000.00, NULL, NULL, 22, '2022-03-15', '本合同不含税价格为人民币201886.8元，适用增值税税率6%，增值税税额为人民币 12113.2元，故本合同总价为人民币 214000元（大写： 贰拾壹万肆仟 圆整）。本合同价格为固定不变价格，包括乙方提供本合同范围内所有技术服务工作所需的全部费用。增值税税额如遇国家有关税收规定调整做相应调整。', '2022-03-16', NULL, NULL, '2', '已阅', 7, '2022-03-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416293580802', 'CMC1：A-22027', NULL, '硬梁包水电站扯索坝、二里坝外部供水工程及冷碛、泸定二中塌岸防护工程地形图测绘技术服务合同', NULL, '0227', 70000.00, NULL, NULL, 22, '2022-05-11', '本合同不含税价格为人民币66037.74元，适用增值税税率 6 %，税费为人民币    元，故本合同含税总价为人民币70000.00元（大写：人民币人民币柒万元整）。本合同不含税总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用（包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）。', '2022-05-25', NULL, NULL, '2', NULL, 7, '2022-05-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416327135233', 'HT2021C031', NULL, '西藏霞曲紫霞水电站G349及Y566复建公路初步设计阶段测量技术服务合同', NULL, '0229', 39000.00, NULL, NULL, 22, '2021-06-23', '经双方协商约定，乙方完成合同范围内工作的技术服务费为含税总金额人民币3.9 万元（大写：叁万玖仟元整）,其中增值税税率为 6 %。', '2021-07-01', NULL, NULL, '2', NULL, 7, '2021-06-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416343912449', 'HT2021C017', NULL, '雅砻江牙根一级水电站可研阶段测绘技术服务合同', NULL, '0231', 48700.00, NULL, NULL, 22, '2021-07-02', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币小写：4.87万元（大写：肆万捌仟柒佰元整）。', '2021-07-07', NULL, NULL, '2', NULL, 7, '2021-07-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416360689665', 'HT2021C011', 'NZK459-21-01', '大渡河瀑布沟水电站电力生产项目设计咨询服务测绘技术服务合同', NULL, '0231', 44800.00, NULL, NULL, 22, '2021-03-05', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币44800.00 元（大写：肆万肆仟捌佰元整）。', '2021-03-12', NULL, NULL, '2', NULL, 7, '2021-03-12', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416377466882', 'HT2021C040', 'KYY-BLFW-2021017', '波罗水电站建设征地界桩测设测绘技术服务采购项目技术服务合同', NULL, '0233', 1798820.00, NULL, NULL, 22, '2021-09-06', '本工程收费参照国家规定的收费标准，经甲乙双方友好协商，工程合同总价为：￥1798820.00元（大写：壹佰柒拾玖万捌仟捌佰贰拾元整），其中增值税率为6%，税金为￥101820.00元（大写：壹拾万壹仟捌佰贰拾元整）。其单价见附表1。\n1）合同约定\n（1）本合同费用采用 单价 承接方式。为开展上述工作内容的所有费用均包含在合同价之中，乙方现场人员的食宿及交通和安全措施费等均包含在合同价之中，本合同甲方不再另行支付。\n（2）乙方自行负责所派驻施工现场的施工人员的人身安全，购买施工保险，配备必要的安全防护设施，本合同甲方认为其费用已包含在相应合同价之中，不再另行支付费用。\n（3）乙方一旦签订合同，应积极服从本合同甲方的现场项目部的领导，配合本合同甲方做好相关工作。', '2021-09-14', NULL, NULL, '2', NULL, 7, '2021-09-14', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416411021314', 'HT2021C012', 'A592GH-21-01', 'YS梯级电站补充加深研究测绘技术服务合同', NULL, '0231', 833500.00, NULL, NULL, 22, '2021-03-25', '经甲、乙双方协商，本合同在总费用变动±5%的范围内采用总价承包方式，合同总金额为人民币833500.00元（大写：捌拾叁万叁仟伍佰元整）。', '2021-03-30', NULL, NULL, '2', NULL, 7, '2021-03-29', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416427798530', 'HT2021C038', 'NZK21097-21-01', 'XR水电站预可（加深）阶段测绘技术服务合同', NULL, '0231', 845000.00, NULL, NULL, 22, '2021-08-25', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币小写：845000.00元（大写：捌拾肆万伍仟元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。', '2021-08-30', NULL, NULL, '2', NULL, 7, '2021-08-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416444575746', 'HT2021C013', 'A510GH-21-01', 'YS水库电站加深研究测绘技术服务合同', NULL, '0231', 254100.00, NULL, NULL, 22, '2021-03-25', '经甲、乙双方协商，本合同在总费用变动±5%的范围内采用总价承包方式，合同总金额为人民币254100.00 元（大写：贰拾伍万四仟壹佰元整）。', '2021-03-30', NULL, NULL, '2', NULL, 7, '2021-03-29', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416520073217', 'HT2021W007', NULL, '湾东水电站、河口水电站复核测量技术服务合同', NULL, '0109', 50000.00, NULL, NULL, 22, '2021-01-20', '2021年01月20日现场查勘后，经双方协商一致确定，本合同为总价承包合同，湾东水电站和河口水电站复核测量技术服务的合同总费用为￥5万元（含税）（大写：人民币 伍万整）。', '2021-01-28', NULL, NULL, '2', NULL, 7, '2021-01-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416536850434', 'HT2021C030', NULL, '溪洛渡水电站金阳县、雷波县沿江县乡复建公路病害治理测量技术服务合同', NULL, '0229', 99721.15, NULL, NULL, 22, '2021-06-28', '经双方协商约定，乙方完成合同范围内工作的技术服务费为含税总金额人民币99721.14 元（大写：玖万玖仟柒佰贰拾壹元壹角肆分）,其中增值税税率为 6 %。', '2021-07-01', NULL, NULL, '2', NULL, 7, '2021-06-30', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416578793474', 'HT2020W080', NULL, '雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测合同文件', NULL, '0200', 2530350.00, NULL, NULL, 22, '2020-12-03', '承包人承诺，将2017年签订的雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测合同(合同编号：ETDC-201729)所缴纳的履约保证金263,535.00元，转入本年度合同。', '2020-12-13', NULL, NULL, '2', NULL, 7, '2020-12-04', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416603959298', 'CMC1：A-23011', 'CD2C20230140', '国网拉萨发电公司纳金电站溢流坝综合治理可行性研究项目地形图测绘技术服务合同', NULL, '0237', 450000.00, NULL, NULL, 22, '2023-02-10', '本合同总价为：&yen;450000.00元（大写：肆拾伍万元整），本合同约定总价格为不含税价格+增值税，不含税价格为&yen;424528.30元，增值税税率为6%，增值税税额为&yen;25471.70元，不含税价格不因国家税率变化而变化，若在合同履行期间，遇国家税率调整，则增值税相应调整，从而价税合计相应调整，以开具发票的时间为准；包括乙方提供本合同范围内所有硬件、软件所需的全部费用。', NULL, NULL, NULL, '2', '已核', 7, '2023-02-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416620736513', 'HT2020W037', NULL, '雅安市名山区水利局河流河道管理范围划界项目政府采购合同', NULL, '0199', 2150000.00, NULL, NULL, 22, '2020-09-07', '合同约定乙方交纳中标总价的5%即人民币&yen;107500.00元作为本合同的履约保证金，可采用转账或履约担保方式。经双方沟通，我公司办理本项目的履约保函。', '2020-09-09', NULL, NULL, '2', '同意。', 10, '2020-09-10', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416721399809', 'HT2021C041', NULL, '汉源县移民后续项目地形图测绘技术服务合同', NULL, '0227', 895000.00, NULL, NULL, 22, '2021-10-11', '经双方友好协商，基于本合同第1章表1工作内容，本合同价格采用总价包干模式。乙方完成所有测绘工作的技术服务费总金额为人民币￥895000.00元（大写：捌拾玖万伍仟元整），本价格为含税价，税率为6%。\n乙方按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，乙方承诺将无偿处理。本合同不扣减质量保证金。', '2021-10-14', NULL, NULL, '2', NULL, 7, '2021-10-13', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416759148545', 'HT2021C010', 'NZK460-21-01', '大渡河龚铜两站电力生产项目设计咨询服务测绘技术服务合同', NULL, '0231', 163800.00, NULL, NULL, 22, '2021-01-26', '1、经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币163800.00 元（大写：壹拾陆万叁仟捌佰元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。\n2、质量保证金从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '2021-02-03', NULL, NULL, '2', NULL, 7, '2021-01-28', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881416792702977', 'HT2021C005', 'A186KX-21-01', '雅砻江牙根二级（多吉）水电站预可研阶段测绘技术服务合同（第一批次）', NULL, '0231', 243200.00, NULL, NULL, 22, '2021-01-15', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币24.32万元（大写：贰拾肆万叁仟贰佰元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。', '2021-01-27', NULL, NULL, '2', NULL, 7, '2021-01-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881417006612482', 'HT2021C028', 'NZK180-21-01', '雅砻江二滩水电站电力生产项目设计后续服务测绘技术服务合同', NULL, '0231', 225100.00, NULL, NULL, 22, '2021-06-14', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币大写：贰拾贰万伍仟壹佰元整（小写：225100.00元）。', '2021-06-22', NULL, NULL, '2', NULL, 7, '2021-06-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881417044361218', 'HT2022C019', NULL, 'CZTL康定段拆迁安置折多塘安置点地形图测绘合同', NULL, '0227', 52800.00, NULL, NULL, 22, '2022-03-15', '本合同不含税价格为人民币49811.3 元，适用增值税税率6%，增值税税额为人民币 2988.7元，故本合同总价为人民币 52800 元（大写： 伍万贰仟捌佰 圆整）。本合同价格为固定不变价格，包括乙方提供本合同范围内所有技术服务工作所需的全部费用。增值税税额如遇国家有关税收规定调整做相应调整。', '2022-03-17', NULL, NULL, '2', '已阅', 7, '2022-03-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881417367322626', 'HT2020W80', '5101042020000538', '眉山市青神县莫中坝、慈母溪、雷中坝渡口水下地形图测绘项目合同', NULL, '0133', 52000.00, NULL, NULL, 22, '2020-12-01', '本项目总价为：人民币52000.00元（大写：伍万贰仟元整）。', '2020-12-05', NULL, NULL, '2', NULL, 7, '2020-12-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881417472180225', 'HT2020C028', 'A484GH-20-01', 'ML水库电站规划加深阶段', NULL, '0231', 94700.00, NULL, NULL, 22, '2020-11-19', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币94700.00   元（大写：玖万肆仟柒佰元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。除本合同另有约定外，此合同总价承包不予调整。', '2020-11-26', NULL, NULL, '2', NULL, 7, '2020-11-23', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881417564454914', 'HT2022C009', NULL, '天星坝水库输水工程输水主隧洞施工1#和2#支洞口测量控制网的建网及观测项目测绘技术服务合同', NULL, '0227', 64800.00, NULL, NULL, 22, '2022-01-25', '本合同不含税价格为人民币61162.22元，适用增值税税率6%，税费为人民币3669.73元，故本合同含税总价为人民币64831.95元（大写：陆万肆仟捌佰叁拾壹元玖角伍分）。本合同不含税总价为固定不变价格，包括乙方提供本合同范围内所有技术咨询服务所需的全部费用（包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）。', '2022-01-26', NULL, NULL, '2', NULL, 7, '2022-01-26', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881417769975809', 'HT2022C008', NULL, '金沙江上游川藏段（西藏侧）河道管理范围划定测绘技术服务合同', NULL, '0231', 1495000.00, NULL, NULL, 22, '2022-01-18', '本合同总价（含税价）为人民币 1495000 元（大写：壹佰肆拾玖万伍仟元整），适 用增值税率为 6 %。其中合同价为 1410377.36 元（大写：壹佰肆拾壹万零叁佰柒拾柒元叁角陆分），增值税为 84622.64 元（大写：捌万肆仟陆佰贰拾贰元陆角肆分）。', '2022-01-25', NULL, NULL, '2', NULL, 7, '2022-01-19', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881417795141633', 'HT2021C049', 'NZK20308-21-01', '武引一期枢纽闸修复项目测绘技术服务合同', NULL, '0231', 26100.00, NULL, NULL, 22, '2021-12-20', '经甲、乙双方协商，本合同采用总价承包计价方式，合同预计费用为人民币小写：2.61万元（大写：贰万陆仟壹佰元整）。\n本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。', '2021-12-29', NULL, NULL, '2', NULL, 7, '2021-12-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881417807724546', 'HT2020C035', 'NZK20249-20-02', '涪江双江航电枢纽工程初步设计阶段测绘技术服务合同', NULL, '0231', 717533.00, NULL, NULL, 22, '2020-12-23', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币717533.00   元（大写：柒拾壹万柒仟伍佰叁拾叁元整）。', '2020-12-30', NULL, NULL, '2', NULL, 7, '2020-12-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881417837084674', 'HT2021C004', NULL, '德阳市沱江上游（石亭江段）水环境治理项目测绘技术服务合同', NULL, '0231', 629800.00, NULL, NULL, 22, '2021-01-18', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币629800.00   元（大写：陆拾贰万玖仟捌佰元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。', '2021-01-25', NULL, NULL, '2', NULL, 7, '2021-01-20', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881417862250498', 'HT2020C022', 'NZK20096-20-02', '重庆市开州区移民新城供水项目（鲤鱼塘水库）泄洪河道及引水渠道综合治理工程勘察设计测绘技术服务合同', NULL, '0231', 21732.00, NULL, NULL, 22, '2020-11-02', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币21732.00元（大写：贰万壹仟柒佰叁拾贰元整）。', '2020-11-09', NULL, NULL, '2', NULL, 7, '2020-11-04', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881417971302402', 'HT2020W062', 'GDAS-CSJ-KS-2020-005', '国电四川阿水电力开发有限公司绰斯甲水电站工程施工测量控制网复测技术服务合同', NULL, '0083', 971052.42, NULL, NULL, 22, '2020-10-15', '本合同签约价（含税）为￥971052.42元（大写：人民币玖拾柒万壹仟零伍拾贰元肆角贰分）。其中不含税金额为￥916087.19元（大写：人民币玖拾壹万陆仟零捌拾柒元壹角玖分），税金（税率：6%）为￥54965.23元（大写：人民币伍万肆仟玖佰陆拾伍元贰角叁分）。本合同签约价为乙方完成合同规定的全部工作内容的一切费用（包括但不限于专用技术使用费、技术转让或技术支持费、包装费、劳务费、安全生产费、保险费、食宿费、交通费、差旅费、管理费、税费、运杂费、利润、成交服务费、不可预见费）。费用组成详见附件《报价明细表》。', '2020-10-21', NULL, NULL, '2', NULL, 7, '2020-10-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418034216962', 'HT2020W047', NULL, '溪洛渡水电站坝区土地勘界及测绘技术服务合同', NULL, '0147', 1296500.00, NULL, NULL, 22, '2020-09-17', '本合同为固定单价合同，合同总价款为人民币壹佰贰拾玖万陆仟伍佰元整（&yen; 1296500.00元）。其中，不含税价：&yen;1223113.21元，增值税税额：&yen;73386.79元，增值税税率 6% 。', '2020-09-18', NULL, NULL, '2', NULL, 7, '2020-09-21', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418227154945', 'HT2020W023', NULL, '昌都市河湖管理范围划定及岸线保护与利用规划编制项目技术服务合同', NULL, '0193', 2280000.00, NULL, NULL, 22, '2020-08-03', '本项目约定工作范围内合同总价为&yen;2280000.00元（大写人民币：贰佰贰拾捌万元整）。如甲方委托工作范围及工作内容发生变化，甲乙双方另行协商。', '2020-08-18', NULL, NULL, '2', NULL, 7, '2020-08-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418256515073', 'HT2020C029', NULL, '双江航电枢纽工程初步设计阶段测绘技术服务合同', NULL, '0231', 932524.00, NULL, NULL, 22, '2020-11-12', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币932524.00   元（大写：玖拾叁万贰仟伍佰贰拾肆元整）。本合同金额已包括本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、利润及税金等全部费用。除本合同另有约定外，此合同总价承包不予调整。', '2020-11-27', NULL, NULL, '2', NULL, 7, '2020-11-16', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418273292290', 'HT2020W026', NULL, '自贡市沿滩新城区管理委员会卧龙湖东区基础测绘采购项目合同', NULL, '0281', 4780000.00, NULL, NULL, 22, '2020-07-22', '本合同采用总价承包模式，合同总价为￥4780000.00元（大写：人民币肆佰柒拾捌万元）（含税价）。', '2020-08-03', NULL, NULL, '2', NULL, 7, '2020-07-24', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418290069506', 'HT2022C010', NULL, '朋曲河道管理范围划定测绘技术服务合同', NULL, '0231', 2120000.00, NULL, NULL, 22, '2022-01-18', '本合同总价（含税价）为人民币 2120000.00 元（大写： 贰佰壹拾贰万元整），适 用增值税率为 6 %。其中合同价为 2000000.00 元（大写：贰佰万元整），增值税为120000.00 元（大写： 壹拾贰万元整）。', '2022-01-25', NULL, NULL, '2', NULL, 7, '2022-01-19', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418327818241', 'HT2020C033', NULL, '双江口水电站康生寺外部供水工程、大石凼居民点补测等工程测绘技术服务合同', NULL, '0227', 69000.00, NULL, NULL, 22, '2020-12-01', '本合同价格采用总价包干模式。本合同价格为人民币6.51万元，适用增值税税率6%，税费为人民币0.39万元，本合同总价为人民币6.9万元（大写：陆万玖仟元整）。', '2020-12-10', NULL, NULL, '2', NULL, 7, '2020-12-02', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418340401153', 'HT2020C012', 'XZGS-GC-2020-003', '羊湖太阳能蓄能储能项目地形地类修正测绘及断面测绘技术服务合同', NULL, '0237', 58500.00, NULL, NULL, 22, '2020-09-01', NULL, '2020-09-17', NULL, NULL, '2', NULL, 7, '2020-09-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418399121410', 'HT2020C017', NULL, '番禺区62条河涌管网完善及农村生活污水查缺补漏工程测量技术服务合同', NULL, '0236', 309500.00, NULL, NULL, 22, '2020-10-20', NULL, '2020-10-30', NULL, NULL, '2', NULL, 7, '2020-10-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418411704322', 'HT2020W041', 'A357KX-20-02', '西昌东河水库测绘技术服务合同（枢纽区1:500）', NULL, '0231', 95300.00, NULL, NULL, 22, '2020-07-10', NULL, '2020-07-22', NULL, NULL, '2', NULL, 7, '2020-07-14', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418524950530', 'HT2020C011', NULL, '岷江老木孔航电枢纽工程测绘技术服务合同', NULL, '0231', 300000.00, NULL, NULL, 22, '2020-09-01', '本合同采用总价承包模式。', '2020-09-16', NULL, NULL, '2', NULL, 7, '2020-09-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418575282177', 'HT2020W025', NULL, '重庆市开州区移民新城供水项目（鲤鱼塘水库）泄洪河道及引水渠道综合治理工程勘察设计测绘技术服务合同', NULL, '0226', 45000.00, NULL, NULL, 22, '2020-08-12', NULL, '2020-08-17', NULL, NULL, '2', NULL, 7, '2020-08-14', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418592059394', 'HT2020C016', 'A359KX-20-02', '绰斯甲水电站测绘技术服务合同', NULL, '0231', 110700.00, NULL, NULL, 22, '2020-09-21', '本合同采用总价承包模式，总价为￥110700元。', '2020-09-30', NULL, NULL, '2', NULL, 7, '2020-09-25', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418608836610', 'HT2021C047', 'NZXM1904-21-01', 'NZXM1904项目公路测量测绘技术服务合同', NULL, '0231', 497000.00, NULL, NULL, 22, '2021-12-08', '经甲、乙双方协商，本合同采用总价承包计价方式，合同费用为人民币小写： 497000.00元（大写：肆拾玖万柒仟元整）。不含税金额为468800.00元（大写：肆拾陆万捌仟捌佰元整），税额为28100.00元（大写：贰万捌柒壹佰元整）。', '2021-12-13', NULL, NULL, '2', NULL, 7, '2021-12-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418642391041', 'HT2020W009', NULL, '石棉县孟获城景区规划用地测绘技术服务项目技术服务合同', NULL, '0155', 0.00, NULL, NULL, 22, '2020-04-16', '本合同为单价合同。以实际工作量结算，1:500地形图测绘工作单价为：130.00元/亩（大写：壹佰叁拾元整）；五等测量控制点1000.00元/个（大写：壹仟元整）。', '2020-04-27', NULL, NULL, '2', NULL, 7, '2020-04-17', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418696916993', 'HT2020C021', NULL, '重庆潼南双江航电工程库区专项工程道路、防护工程测绘技术服务合同', NULL, '0227', 229000.00, NULL, NULL, 22, '2020-10-12', '经双方友好协商，基于本合同第1章表1工作内容，本合同价格采用总价包干模式。乙方完成所有测绘工作的技术服务费总金额为人民币￥230000.00元（大写：人民币贰拾叁万圆整），本价格为含税价，税率为6%。', '2020-10-19', NULL, NULL, '2', NULL, 7, '2020-10-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418764025857', 'HT2021C020', 'NZK20209-21-01', '大渡河老鹰岩一级水电站可行性研究阶段测绘技术服务合同', NULL, '0231', 391200.00, NULL, NULL, 22, '2021-05-17', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币391200.00元（大写：叁拾玖万壹仟贰佰元整）。', '2021-05-21', NULL, NULL, '2', NULL, 7, '2021-05-19', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418793385986', 'HT2021C015', 'CD2C20210401', '大岗山库区黄草坪变形体实物指标补充调查测量配合技术服务工作合同', NULL, '0227', 16500.00, NULL, NULL, 22, '2021-04-20', '经双方友好协商，基于本合同第1条项目概况中的工作内容，本合同价格采用总价包干模式。本合同价格为人民币1.56万元，适用增值税税率6%，税费为人民币0.09万元，本合同总价为人民币1.65万元（大写：壹万陆仟伍佰元整），本合同价格为固定不变价格，增值税税额如遇国家有关税收规定调整做相应调整。', '2021-04-23', NULL, NULL, '2', NULL, 7, '2021-04-22', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418822746114', 'HT2020C009', NULL, '大岗山水电站库区下烂田湾塌岸1:2000地形图测绘技术服务合同', NULL, '0227', 26815.00, NULL, NULL, 22, '2020-06-08', NULL, '2020-06-10', NULL, NULL, '2', NULL, 7, '2020-06-09', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418894049281', 'HT2021C034', 'NZK435-21-01', '西巴霞曲流域综合规划（含规划环评）测绘技术服务合同', NULL, '0231', 190000.00, NULL, NULL, 22, '2021-07-13', '经甲、乙双方协商，本合同采用总价承包计价方式，合同总金额为人民币小写：190000.00元（大写：壹拾玖万元整）。', '2021-07-29', NULL, NULL, '2', NULL, 7, '2021-07-15', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418910826498', 'HT2022C013', 'NZK434-2022-01', '西巴霞曲流域水电规划（含规划环评）测绘技术服务合同', NULL, '0231', 1388000.00, NULL, NULL, 22, '2022-01-20', NULL, '2022-01-26', NULL, NULL, '2', NULL, 7, '2022-01-21', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881418923409409', 'HT2022C012', 'NZL010-2022-01', '西巴霞曲河湖管理范围划定测绘技术服务合同', NULL, '0231', 1030000.00, NULL, NULL, 22, '2022-01-20', '经甲、乙双方协商，本合同采用总价承包计价方式，合同费用为人民币小写：103.00万元（大写：壹佰零叁万元整）。不含税金额为97.17万元（大写：玖拾柒万壹仟柒佰元整），税额为5.83万元（大写：伍万捌仟叁佰元整）。', '2022-01-26', NULL, NULL, '2', NULL, 7, '2022-01-21', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881419070210050', 'CMC1：A-21036', NULL, '汉源县城流沙河生态修复工程（1#、2#、3#坝）地形图测绘项目技术服务合同', NULL, '0226', 527200.00, NULL, NULL, 22, '2021-07-05', '本合同不含税价格为人民币 495568元，适用增值税税率6%，增值税为人民币31632元，合同总价为人民币 527200元（大写伍拾贰万柒仟贰佰圆整），费用详见《合同工作量清单及价格表》。本合同为固定总价合同，不含税价格为固定不变价格，增值税如遇国家有关税收规定调整做相应调整。', '2021-07-20', NULL, NULL, '2', '已核', 7, '2022-07-06', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881419162484738', 'HT2020C006', 'A227KX-20-01', '金沙江波罗水电站测绘技术服务合同', NULL, '0226', 111900.00, NULL, NULL, 22, '2020-08-24', NULL, '2020-08-24', NULL, NULL, '2', NULL, 7, '2020-08-27', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1648881421276413954', 'HT2021C003', NULL, '沱江江阳区段河道划界项目测绘工程技术服务采购服务合同', NULL, '0231', 594535.00, NULL, NULL, 22, '2021-02-01', '本合同为固定总价合同，合同不含税总价560882.08元，（大写：伍拾陆万零捌佰捌拾贰元捌分），含税总价为594535.00元，（大写：伍拾玖万肆仟伍佰叁拾伍），税率6%，除合同另有约定外不含税总价不变，税率按国家相关政策执行。', '2021-02-04', NULL, NULL, '2', NULL, 7, '2021-02-03', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1658881410780762919', 'CMC2：G-24007', 'SGSCAB00JSJS2400598', '阿坝1000kV变电站新建工程永久、临时土地使用报件服务技术服务合同', NULL, '0084', 902300.00, NULL, NULL, 22, '2024-06-14', '5.1 技术服务报酬总额为：人民币（大写） 玖拾万贰仟叁佰元 整  ( &yen; 902300.00 ）（含税），其中，不含税价人民币 捌拾伍万壹 仟贰佰贰拾陆元肆角贰分 （大写） ( &yen; 851226.42 ），增值税税率6 %，增值税税额 51073.58 元。当合同约定的税率与国家税法规 定及税务机关认定的税率不一致时，以国家税法规定及税务机关认定 的税率为准进行调整，调整时以不含税价为基准，执行国家法规规定 及税务机关规定的税率。\n该报酬包含乙方履行本合同所需全部费用，包括但不限于员工工 资、加班费、咨询费、资料费、交通费、食宿费以及税费等。', NULL, NULL, NULL, '2', NULL, NULL, '2024-06-18', NULL, NULL, NULL);
INSERT INTO `cmc_contract` VALUES ('1658881414813722843', 'CMC1：A-24024', 'A510GH-2024-CH01', '雅鲁藏布江下游JW梯级水电站可研阶段测绘技术服务合同', NULL, '0231', 5300082.26, NULL, NULL, 22, '2024-06-18', '经甲、乙双方协商，本合同采用单价承包计价方式，合同预估总金额为人民币￥5300082.26元（大写：人民币伍佰叁拾万零捌拾贰元贰角陆分），其中：不含税价款为人民币5000077.60元（大写：人民币伍佰万零柒拾柒元陆角），适用增值税税率6 %，税费为人民币300004.66元（大写：人民币叁拾万零肆元陆角陆分）。', NULL, NULL, NULL, '2', NULL, NULL, '2024-06-18', NULL, NULL, NULL);

-- ----------------------------
-- 34、cmc合同意见表
-- ----------------------------
drop table if exists `cmc_contract_comment`;
create table `cmc_contract_comment`  (
  `comment_id` 		bigint not null  auto_increment comment '合同会审意见id',
  `contract_id` 	char(19)  		default null comment '合同id',
  `dept_id` 		bigint  		default null comment '会审部门',
  `user_id` 		bigint 			default null comment '会审人',
  `comment` 		varchar(255)  	default null comment '会审意见',
  `document` 		varchar(255)  	default null comment '会审附件',
  `comment_time` 	datetime 		default null comment '会审日期',
  primary key (`comment_id`)
) engine = innodb comment = 'cmc合同意见表';

-- ----------------------------
-- 初始化-合同意见表数据
-- ----------------------------
INSERT INTO `cmc_contract_comment` VALUES (1, '1648881418273292290', NULL, 15, '同意办理', NULL, '2020-07-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (2, '1648881410443000246', NULL, 13, '已阅核，无异议。', NULL, '2021-08-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (3, '1648881410407875991', NULL, 15, '同意', NULL, '2021-01-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (4, '1648881414750076930', NULL, 13, '已核。', NULL, '2021-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (5, '1648881410136522882', NULL, 13, '已核，无异议。', NULL, '2024-03-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (6, '1648881410441228534', NULL, 15, '同意', NULL, '2020-11-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (7, '1648881418696916993', NULL, 15, '同意', NULL, '2020-10-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (8, '1648881410746976608', NULL, 15, '同意', NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (9, '1648881417862250498', NULL, 15, '同意', NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (10, '1648881418575282177', NULL, 15, '同意', NULL, '2020-08-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (11, '1648881410113168220', NULL, 13, '已阅核，无异议。', NULL, '2023-11-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (12, '1648881410738925672', NULL, 13, '已核。', NULL, '2021-10-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (13, '1648881410911342315', NULL, 13, '已核。', NULL, '2021-06-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (14, '1648881415815430146', NULL, 13, '已核，无异议。', NULL, '2022-09-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (15, '1648881414066405379', NULL, 13, '已核，拟同意。', NULL, '2021-12-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (16, '1648881410700168790', NULL, 13, '已阅核，无异议。', NULL, '2023-12-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (17, '1648881410507178532', NULL, 13, '已核，无异议。', NULL, '2024-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (18, '1648881410299732520', NULL, 13, '已核，无异议。', NULL, '2024-03-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (19, '1648881410498756858', NULL, 15, '同意', NULL, '2020-10-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (20, '1648881410883138636', NULL, 13, '已核，无异议。', NULL, '2022-12-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (21, '1648881410407248219', NULL, 15, '同意办理', NULL, '2020-09-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (22, '1648881410368129016', NULL, 13, '已阅核，无异议。', NULL, '2023-06-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (23, '1648881410247956787', NULL, 13, '已核，无异议。', NULL, '2023-10-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (24, '1648881410582765611', NULL, 13, '已阅核，无异议。', NULL, '2022-04-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (25, '1648881410116992716', NULL, 13, '已阅核，无异议。', NULL, '2022-12-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (26, '1648881413131075586', NULL, 13, '已阅核，无异议。', NULL, '2022-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (27, '1648881412682285058', NULL, 13, '已阅核，无异议。', NULL, '2022-11-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (28, '1648881410640506692', NULL, 13, '已核。', NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (29, '1648881410781807294', NULL, 15, '同意办理', NULL, '2020-03-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (30, '1648881411122003970', NULL, 13, '已核。', NULL, '2023-05-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (31, '1648881413072355329', NULL, 13, '已核，无异议。', NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (32, '1648881413667946498', NULL, 13, '已阅核，无异议。', NULL, '2022-11-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (33, '1648881414473252866', NULL, 13, '已核，无异议。', NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (34, '1648881411499491372', NULL, 13, '已核，无异议', NULL, '2023-09-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (35, '1648881412002807809', NULL, 13, '已阅核，无异议。', NULL, '2023-02-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (36, '1648881411499491375', NULL, 13, '已核，无异议。', NULL, '2023-10-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (37, '1648881413500174338', NULL, 13, '已阅核，无异议。', NULL, '2022-03-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (38, '1648881416293580802', NULL, 13, '已阅核，无异议。', NULL, '2022-05-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (39, '1648881413584060417', NULL, 13, '已阅核，无异议。', NULL, '2022-05-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (40, '1648881414389366785', NULL, 13, '已阅核，无异议。', NULL, '2022-07-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (41, '1648881410695968877', NULL, 13, '已核，无异议。', NULL, '2021-11-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (42, '1648881411499491347', NULL, 13, '已阅核，无异议。', NULL, '2023-12-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (43, '1648881411826647041', NULL, 13, '已阅核，无异议。', NULL, '2023-05-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (44, '1648881410768387087', NULL, 13, '已核，无异议。', NULL, '2023-12-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (45, '1648881412040556545', NULL, 13, '已阅核，无异议。', NULL, '2022-10-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (46, '1648881410222755173', NULL, 13, '已核，无异议。', NULL, '2024-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (47, '1648881410251834900', NULL, 13, '已阅核，无异议。', NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (48, '1648881410970220958', NULL, 13, '已阅核，无异议。', NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (49, '1648881410331459017', NULL, 13, '已阅核，无异议。', NULL, '2024-03-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (50, '1648881411499491361', NULL, 13, '已阅核，无异议。', NULL, '2023-11-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (51, '1648881410832596993', NULL, 13, '已核，无异议。', NULL, '2023-10-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (52, '1648881410441185548', NULL, 15, '同意办理', NULL, '2020-08-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (53, '1648881418340401153', NULL, 15, '同意办理', NULL, '2020-09-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (54, '1648881410137848937', NULL, 13, '已核，无异议。', NULL, '2023-06-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (55, '1648881410233908946', NULL, 13, '已阅核，无异议。', NULL, '2023-11-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (56, '1648881411499491382', NULL, 13, '已核，无异议。', NULL, '2023-10-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (57, '1648881410944366976', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (58, '1658881414813722843', NULL, 13, '已核，无异议。', NULL, '2024-06-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (59, '1648881416343912449', NULL, 13, '已核。', NULL, '2021-07-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (60, '1648881415798652929', NULL, 13, '已核。', NULL, '2021-11-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (61, '1648881415286947841', NULL, 13, '已核。', NULL, '2021-11-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (62, '1648881410330549313', NULL, 13, '已核。', NULL, '2021-06-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (63, '1648881416792702977', NULL, 15, '同意', NULL, '2021-01-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (64, '1648881410559741274', NULL, 15, '同意', NULL, '2021-01-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (65, '1648881411373662209', NULL, 13, '已核。', NULL, '2021-10-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (66, '1648881410631270418', NULL, 13, '已阅核，无异议。', NULL, '2023-09-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (67, '1648881410970475344', NULL, 13, '已核。', NULL, '2021-06-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (68, '1648881410631270454', NULL, 13, '已核，无异议。', NULL, '2021-11-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (69, '1648881415375028225', NULL, 13, '已阅核。', NULL, '2022-07-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (70, '1648881410892891237', NULL, 13, '已核。', NULL, '2021-06-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (71, '1648881410921280755', NULL, 15, '同意', NULL, '2021-01-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (72, '1648881411067478017', NULL, 13, '已核，无异议。', NULL, '2023-05-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (73, '1648881412573233153', NULL, 13, '已阅核，无异议。', NULL, '2022-10-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (74, '1648881413483397121', NULL, 13, '已核，无异议。', NULL, '2022-05-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (75, '1648881415446331394', NULL, 13, '已核。', NULL, '2021-07-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (76, '1648881412422238210', NULL, 13, '已阅核，无异议。', NULL, '2022-04-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (77, '1648881417006612482', NULL, 13, '已核。', NULL, '2021-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (78, '1648881413860884481', NULL, 13, '已核。', NULL, '2021-11-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (79, '1648881416578793474', NULL, 15, '同意', NULL, '2020-12-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (80, '1648881411331719170', NULL, 13, '已核，无异议。', NULL, '2021-11-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (81, '1648881410960592700', NULL, 13, '已核，无异议。', NULL, '2024-05-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (82, '1648881415429554178', NULL, 13, '已阅核，无异议。', NULL, '2022-03-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (83, '1648881411499491350', NULL, 13, '已阅核，无异议。', NULL, '2024-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (84, '1648881411499491355', NULL, 13, '已阅核，无异议。', NULL, '2023-12-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (85, '1648881416620736513', NULL, 15, '同意办理', NULL, '2020-09-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (86, '1648881410972336941', NULL, 15, '同意', NULL, '2020-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (87, '1648881413164630018', NULL, 13, '已阅核，无异议。', NULL, '2023-07-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (88, '1648881410878734337', NULL, 13, '已核。', NULL, '2023-08-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (89, '1648881410738961210', NULL, 13, '已阅核，无异议。', NULL, '2023-12-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (90, '1648881410744516610', NULL, 13, '已核，无异议。', NULL, '2023-10-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (91, '1648881413412093953', NULL, 13, '已阅核，无异议。', NULL, '2022-06-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (92, '1648881411927310338', NULL, 13, '已核，无异议。', NULL, '2023-02-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (93, '1648881410565090039', NULL, 13, '已阅核，无异议。', NULL, '2022-05-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (94, '1648881410358610942', NULL, 15, '同意办理', NULL, '2020-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (95, '1648881411499491363', NULL, 13, '已核，无异议。', NULL, '2023-10-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (96, '1648881411499491336', NULL, 13, '已阅核，无异议。', NULL, '2023-12-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (97, '1648881410862884037', NULL, 15, '同意', NULL, '2020-08-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (98, '1648881413462425602', NULL, 15, '同意', NULL, '2020-08-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (99, '1648881410906269866', NULL, 15, '同意办理', NULL, '2020-09-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (100, '1648881410948033623', NULL, 13, '已阅核，无异议。', NULL, '2022-05-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (101, '1648881410944784475', NULL, 13, '已核，无异议。', NULL, '2024-03-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (102, '1648881410780227510', NULL, 13, '已核，无异议。', NULL, '2024-03-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (103, '1648881410989418161', NULL, 13, '已阅核，无异议。', NULL, '2021-12-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (104, '1648881411499491348', NULL, 13, '已核，无异议。', NULL, '2024-01-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (105, '1648881410556314675', NULL, 15, '拟同意', NULL, '2020-11-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (106, '1648881410971979181', NULL, 13, '已核，拟同意。', NULL, '2021-05-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (107, '1648881413751832578', NULL, 13, '已阅核，无异议。', NULL, '2022-12-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (108, '1648881415001735169', NULL, 13, '已阅核，无异议.', NULL, '2022-04-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (109, '1648881416536850434', NULL, 13, '已核。', NULL, '2021-06-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (110, '1648881418034216962', NULL, 15, '同意办理', NULL, '2020-09-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (111, '1648881410262720843', NULL, 15, '同意办理', NULL, '2020-09-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (112, '1648881410348435466', NULL, 13, '已核。', NULL, '2021-09-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (113, '1648881418411704322', NULL, 15, '同意办理', NULL, '2020-07-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (114, '1648881410239584326', NULL, 15, '同意办理', NULL, '2020-06-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (115, '1648881413265293314', NULL, 13, '已核，无异议。', NULL, '2023-02-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (116, '1648881410823903865', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (117, '1648881410631270419', NULL, 13, '已阅核，无异议。', NULL, '2023-11-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (118, '1648881416327135233', NULL, 13, '已核。', NULL, '2021-06-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (119, '1648881410183642225', NULL, 15, '同意办理', NULL, '2020-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (120, '1648881410312850944', NULL, 13, '已阅核，无异议。', NULL, '2024-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (121, '1648881410291107304', NULL, 13, '已核。', NULL, '2021-06-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (122, '1648881410929631852', NULL, 13, '已核。', NULL, '2022-12-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (123, '1648881418894049281', NULL, 13, '已核。', NULL, '2021-07-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (124, '1648881418910826498', NULL, 13, '已阅核，无异议。', NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (125, '1648881418923409409', NULL, 13, '已阅核，无异议。', NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (126, '1648881417795141633', NULL, 13, '已核。', NULL, '2021-12-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (127, '1648881414066405378', NULL, 13, '已核。', NULL, '2021-08-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (128, '1648881416520073217', NULL, 15, '同意', NULL, '2021-01-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (129, '1648881421276413954', NULL, 15, '同意', NULL, '2021-02-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (130, '1648881410691482684', NULL, 15, '同意办理', NULL, '2020-05-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (131, '1648881410683729479', NULL, 13, '已核。', NULL, '2021-01-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (132, '1648881414355812353', NULL, 13, '已核。', NULL, '2023-07-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (133, '1648881417564454914', NULL, 13, '已核。', NULL, '2022-01-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (134, '1648881410970356648', NULL, 15, '同意办理', NULL, '2020-07-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (135, '1648881412774559745', NULL, 13, '已核，无异议。', NULL, '2022-12-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (136, '1648881410768077938', NULL, 13, '已核，无异议。', NULL, '2023-09-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (137, '1648881410498151517', NULL, 13, '已核，无异议。', NULL, '2023-09-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (138, '1648881410125372801', NULL, 13, '已核。', NULL, '2021-09-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (139, '1648881410674477562', NULL, 13, '已核。', NULL, '2021-05-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (140, '1648881410534333954', NULL, 15, '同意', NULL, '2020-12-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (141, '1648881410631270459', NULL, 13, '已核。', NULL, '2021-03-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (142, '1648881410241016160', NULL, 13, '已阅核，无异议。', NULL, '2022-07-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (143, '1648881414192234498', NULL, 13, '已阅核，无异议。', NULL, '2023-03-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (144, '1648881416243249154', NULL, 13, '已核。', NULL, '2021-04-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (145, '1648881415265976322', NULL, 13, '已阅核，无异议。', NULL, '2023-03-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (146, '1648881410692363818', NULL, 15, NULL, NULL, '2020-03-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (147, '1648881414292897793', NULL, 13, '已阅核，无异议。', NULL, '2023-03-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (148, '1648881414880100353', NULL, 13, '已核，无异议。', NULL, '2021-11-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (149, '1648881414259343361', NULL, 13, '已阅核，无异议。', NULL, '2023-03-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (150, '1648881415047872514', NULL, 13, '已阅核，无异议。', NULL, '2023-03-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (151, '1648881411847618561', NULL, 13, '已核。', NULL, '2023-08-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (152, '1648881413244321794', NULL, 13, '已阅核，无异议。', NULL, '2023-02-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (153, '1648881414276120578', NULL, 13, '已阅核，无异议。', NULL, '2023-03-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (154, '1648881411499491344', NULL, 13, '已阅核，无异议。', NULL, '2023-12-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (155, '1648881410537398469', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (156, '1648881411499491381', NULL, 13, '已核。', NULL, '2023-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (157, '1648881410631270402', NULL, 13, '已核，无异议。', NULL, '2023-04-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (158, '1648881411499491345', NULL, 13, '已阅核，无异议。', NULL, '2023-12-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (159, '1648881410643459009', NULL, 13, '已核。', NULL, '2021-06-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (160, '1648881411788898307', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (161, '1648881410866642195', NULL, 13, '已核，无异议。', NULL, '2024-06-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (162, '1648881410649460614', NULL, 13, '已核，无异议。', NULL, '2023-09-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (163, '1648881410542685455', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (164, '1648881418327818241', NULL, 15, '同意', NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (165, '1648881415861567490', NULL, 13, '已阅核，无异议。', NULL, '2022-03-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (166, '1648881410507534625', NULL, 13, '已阅核，无异议。', NULL, '2023-02-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (167, '1648881410631270433', NULL, 13, '已核，无异议。', NULL, '2024-05-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (168, '1648881411499491351', NULL, 13, '已阅核，无异议。', NULL, '2023-12-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (169, '1648881418256515073', NULL, 15, '拟同意', NULL, '2020-11-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (170, '1648881410289032772', NULL, 15, '同意', NULL, '2020-10-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (171, '1648881412124442625', NULL, 13, '已阅，无异议。', NULL, '2023-07-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (172, '1648881418642391041', NULL, 15, '同意办理', NULL, '2020-04-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (173, '1648881410121267356', NULL, 13, '已阅核', NULL, '2022-03-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (174, '1648881410335448898', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (175, '1648881410840613277', NULL, 15, '同意', NULL, '2020-06-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (176, '1648881413227544578', NULL, 13, '已阅核，无异议。', NULL, '2022-05-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (177, '1648881410788654845', NULL, 13, '已阅核，无异议。', NULL, '2022-10-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (178, '1648881410879477066', NULL, 15, '同意办理', NULL, '2020-04-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (179, '1648881410887197715', NULL, 13, '已核。', NULL, '2021-04-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (180, '1648881410782571556', NULL, 13, '已阅核，无异议。', NULL, '2023-07-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (181, '1648881412875223041', NULL, 13, '已核，无异议。', NULL, '2023-02-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (182, '1648881410752886583', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (183, '1648881412296409090', NULL, 13, '已阅核，无异议。', NULL, '2022-11-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (184, '1648881411218472961', NULL, 13, '已核。', NULL, '2023-05-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (185, '1648881410839617904', NULL, 13, '已核，无异议。', NULL, '2023-05-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (186, '1648881410694184962', NULL, 13, '已核，无异议。', NULL, '2023-08-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (187, '1648881410631270441', NULL, 13, '已阅核，无异议。', NULL, '2024-04-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (188, '1648881410230989354', NULL, 13, '已核。', NULL, '2023-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (189, '1648881410614180504', NULL, 15, '同意', NULL, '2020-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (190, '1648881410366968717', NULL, 13, '已阅核，无异议。', NULL, '2022-08-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (191, '1648881410357926147', NULL, 15, '同意办理', NULL, '2020-10-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (192, '1648881410227794174', NULL, 13, '已核，无异议。', NULL, '2023-05-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (193, '1648881410375591598', NULL, 13, '已阅核。', NULL, '2020-12-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (194, '1648881410910076058', NULL, 13, '已阅核，无异议。', NULL, '2022-04-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (195, '1648881410914560063', NULL, 13, '已阅核。', NULL, '2023-03-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (196, '1648881410997134774', NULL, 15, '已核。', NULL, '2020-12-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (197, '1648881410578684211', NULL, 13, '已阅核，无异议。', NULL, '2022-08-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (198, '1648881410990960316', NULL, 13, '已阅核，无异议。', NULL, '2022-08-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (199, '1648881413395316737', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (200, '1648881410354038149', NULL, 13, '已核，无异议。', NULL, '2023-10-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (201, '1648881410975262974', NULL, 13, '已核。', NULL, '2021-11-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (202, '1648881410942099989', NULL, 13, '已核。', NULL, '2021-03-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (203, '1648881410979397634', NULL, 13, '已阅核，无异议。', NULL, '2023-02-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (204, '1648881410997496056', NULL, 15, '同意办理', NULL, '2020-04-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (205, '1648881410822597241', NULL, 15, '拟同意', NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (206, '1648881410861985600', NULL, 13, '已阅核，无异议。', NULL, '2023-07-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (207, '1648881410697335060', NULL, 15, '同意办理', NULL, '2020-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (208, '1648881410912288769', NULL, 13, '已核，无异议。', NULL, '2023-08-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (209, '1648881412204134402', NULL, 13, '已阅核，无异议。', NULL, '2023-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (210, '1648881410776521153', NULL, 13, '已核，无异议。', NULL, '2022-12-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (211, '1648881411587571714', NULL, 13, '已核，无异议。', NULL, '2023-04-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (212, '1648881410929065985', NULL, 13, '已核，无异议。', NULL, '2023-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (213, '1648881412057333761', NULL, 13, '已阅核，无异议。', NULL, '2022-10-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (214, '1648881410296639104', NULL, 13, '已核。', NULL, '2021-05-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (215, '1648881410759619061', NULL, 13, '已核。', NULL, '2023-05-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (216, '1648881413894438914', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (217, '1648881410125467945', NULL, 13, '已核。', NULL, '2021-08-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (218, '1648881418290069506', NULL, 13, '已阅核，无异议。', NULL, '2022-01-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (219, '1648881412594204674', NULL, 13, '已核，无异议。', NULL, '2023-08-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (220, '1648881410717990743', NULL, 15, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (221, '1648881410826406641', NULL, 13, '已阅核，无异议。', NULL, '2023-02-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (222, '1648881413877661698', NULL, 13, '已核，无异议。', NULL, '2022-05-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (223, '1648881410471261557', NULL, 15, '同意办理', NULL, '2020-04-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (224, '1648881410641620227', NULL, 15, '同意办理', NULL, '2020-07-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (225, '1648881410115357569', NULL, 15, '同意办理', NULL, '2020-07-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (226, '1648881411788898306', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (227, '1648881410189150812', NULL, 15, '同意', NULL, '2020-07-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (228, '1648881410118749805', NULL, 15, '同意', NULL, '2020-06-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (229, '1648881410270855494', NULL, 13, '已阅核，无异议。', NULL, '2022-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (230, '1648881410568803046', NULL, 13, '已阅核.', NULL, '2022-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (231, '1648881411252027394', NULL, 13, '已阅核，无异议。', NULL, '2023-05-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (232, '1648881410497398215', NULL, 15, '同意办理', NULL, '2020-06-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (233, '1648881410442959061', NULL, 13, '已核，无异议。', NULL, '2023-05-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (234, '1648881410570164873', NULL, 13, '已核。', NULL, '2021-05-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (235, '1648881410639574064', NULL, 13, '已核。', NULL, '2021-05-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (236, '1648881410270491484', NULL, 15, '同意办理', NULL, '2020-08-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (237, '1648881410144669780', NULL, 15, '同意办理', NULL, '2020-08-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (238, '1648881410883917489', NULL, 13, '已核，无异议。', NULL, '2024-05-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (239, '1648881410414675394', NULL, 15, '拟同意', NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (240, '1648881415026900993', NULL, 13, '已核。', NULL, '2021-08-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (241, '1648881410354070864', NULL, 15, '同意', NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (242, '1648881410704801796', NULL, 15, '同意', NULL, '2020-10-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (243, '1648881410717329443', NULL, 15, '同意办理', NULL, '2020-07-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (244, '1648881410134677458', NULL, 15, '同意', NULL, '2020-10-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (245, '1648881415412776962', NULL, 13, '已核。高程系统及价款需调整，其他无异议。', NULL, '2021-08-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (246, '1648881414527778817', NULL, 13, '已核。', NULL, '2021-11-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (247, '1648881418524950530', NULL, 15, '同意办理', NULL, '2020-09-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (248, '1648881410668416776', NULL, 13, '已核，无异议。', NULL, '2023-05-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (249, '1648881410815819777', NULL, 13, '已核，无异议。', NULL, '2023-04-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (250, '1648881410461347563', NULL, 13, '已核，无异议。', NULL, '2024-05-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (251, '1648881415240810497', NULL, 13, '10.1和10.3条有矛盾，提请甲方修改，其他无异议。', NULL, '2021-10-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (252, '1648881410934959316', NULL, 13, '已核，无异议。', NULL, '2024-04-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (253, '1648881410790653953', NULL, 13, '已核。', NULL, '2023-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (254, '1648881412631953410', NULL, 13, '已阅核，无异议。', NULL, '2022-10-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (255, '1648881415962230785', NULL, 13, '已核。', NULL, '2021-06-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (256, '1648881411944087553', NULL, 13, '已阅核，无异议。', NULL, '2023-02-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (257, '1648881416163557378', NULL, 13, '已阅核，无异议。', NULL, '2022-05-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (258, '1648881411159752705', NULL, 13, '已核，无异议。', NULL, '2023-05-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (259, '1648881413512757249', NULL, 13, '同意。', NULL, '2022-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (260, '1648881410798238379', NULL, 15, '同意', NULL, '2020-11-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (261, '1648881417367322626', NULL, 15, '同意', NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (262, '1648881415349862402', NULL, 15, '拟同意', NULL, '2020-11-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (263, '1648881410107254972', NULL, 13, '已阅核.', NULL, '2023-02-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (264, '1648881410473847805', NULL, 13, '已核，无异议。', NULL, '2023-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (265, '1648881413361762305', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (266, '1648881415362445314', NULL, 15, '同意', NULL, '2021-02-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (267, '1648881411499491373', NULL, 13, '已核，无异议。', NULL, '2023-10-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (268, '1648881410160490777', NULL, 15, '同意办理', NULL, '2020-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (269, '1648881414234177537', NULL, 13, '已阅核，无异议。', NULL, '2022-12-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (270, '1648881410962620417', NULL, 13, '已核。', NULL, '2023-07-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (271, '1648881410552881088', NULL, 15, '同意', NULL, '2021-01-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (272, '1648881410704986343', NULL, 15, '同意办理', NULL, '2020-04-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (273, '1648881410131517581', NULL, 13, '已核。', NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (274, '1648881411499491386', NULL, 13, '已阅核，无异议。', NULL, '2024-05-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (275, '1648881414544556034', NULL, 13, '已核。', NULL, '2021-10-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (276, '1648881410468295383', NULL, 13, '已核。', NULL, '2021-03-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (277, '1648881410942904590', NULL, 15, NULL, NULL, '2020-04-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (278, '1648881410554677623', NULL, 15, '同意办理', NULL, '2020-04-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (279, '1648881410687106800', NULL, 15, '同意办理', NULL, '2020-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (280, '1648881410164555946', NULL, 15, '同意办理', NULL, '2020-06-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (281, '1648881410548586173', NULL, 15, '拟同意', NULL, '2020-11-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (282, '1648881410484403626', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (283, '1648881410561284288', NULL, 15, '同意', NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (284, '1648881410984908632', NULL, 15, '同意', NULL, '2020-05-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (285, '1648881412946526209', NULL, 13, '已核，无异议。', NULL, '2023-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (286, '1648881410382163554', NULL, 15, '同意', NULL, '2020-10-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (287, '1648881411499491330', NULL, 13, '已核，无异议。', NULL, '2024-03-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (288, '1648881411499491385', NULL, 13, '已核。', NULL, '2023-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (289, '1648881410225456144', NULL, 13, '已阅核，无异议。', NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (290, '1648881410682247824', NULL, 15, '拟同意', NULL, '2020-11-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (291, '1648881412812308481', NULL, 13, '已阅核，无异议。', NULL, '2023-03-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (292, '1648881410824162394', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (293, '1648881410500921664', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (294, '1648881414116737025', NULL, 13, '已核，无异议。', NULL, '2021-12-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (295, '1648881415492468738', NULL, 13, '已核。', NULL, '2021-08-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (296, '1648881411499491364', NULL, 13, '已阅核，无异议。', NULL, '2023-11-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (297, '1648881410480275457', NULL, 13, '已核，无异议。', NULL, '2023-08-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (298, '1648881410945843202', NULL, 13, '已核。', NULL, '2023-08-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (299, '1648881414674579458', NULL, 13, '已核，无异议。', NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (300, '1648881415630880769', NULL, 13, '已核。', NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (301, '1648881410691938675', NULL, 13, '已阅核，无异议。', NULL, '2022-03-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (302, '1648881411499491376', NULL, 13, '已核，无异议。', NULL, '2023-08-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (303, '1648881413911216130', NULL, 13, '已阅核，无异议。', NULL, '2022-03-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (304, '1648881411499491369', NULL, 13, '已核，无异议。', NULL, '2023-11-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (305, '1648881410660630529', NULL, 13, '已核，无异议。', NULL, '2023-08-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (306, '1648881410297398475', NULL, 13, '已阅核，无异议。', NULL, '2024-03-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (307, '1648881410631270428', NULL, 13, '已核，无异议。', NULL, '2024-03-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (308, '1648881411138781190', NULL, 13, '已阅核，无异议。', NULL, '2023-12-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (309, '1648881415781875714', NULL, 13, '已核。', NULL, '2021-05-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (310, '1648881410282549870', NULL, 15, '同意', NULL, '2020-09-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (311, '1648881410909582214', NULL, 13, '已阅核，无异议。', NULL, '2022-11-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (312, '1648881412271243265', NULL, 13, '已阅核，无异议。', NULL, '2023-11-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (313, '1648881410373373665', NULL, 13, '已阅核，无异议。', NULL, '2024-04-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (314, '1648881413147852802', NULL, 13, '已阅核，无异议。', NULL, '2022-11-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (315, '1648881415567966210', NULL, 13, '已核。', NULL, '2021-08-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (316, '1648881410820378356', NULL, 15, '同意', NULL, '2020-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (317, '1648881412476764161', NULL, 13, '已阅核，无异议。', NULL, '2022-08-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (318, '1648881417769975809', NULL, 13, '已核。', NULL, '2022-01-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (319, '1648881410980290951', NULL, 15, '同意', NULL, '2020-06-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (320, '1648881410631270464', NULL, 13, '已阅核，无异议。', NULL, '2024-05-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (321, '1648881414775242753', NULL, 13, '已核。', NULL, '2022-08-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (322, '1648881419162484738', NULL, 15, '同意办理', NULL, '2020-08-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (323, '1648881414511001602', NULL, 13, '已核。', NULL, '2021-11-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (324, '1648881411457548290', NULL, 13, '已阅核，无异议。', NULL, '2023-05-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (325, '1648881410200338104', NULL, 13, '已核，无异议。', NULL, '2021-10-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (326, '1648881410430428516', NULL, 15, '同意办理', NULL, '2020-08-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (327, '1648881410540841551', NULL, 15, '同意办理', NULL, '2020-06-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (328, '1648881410571252124', NULL, 15, '同意办理', NULL, '2020-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (329, '1648881410877278518', NULL, 13, '已阅核，无异议。', NULL, '2022-10-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (330, '1648881410609832235', NULL, 13, '已核。', NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (331, '1648881410963115554', NULL, 15, '同意办理', NULL, '2020-08-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (332, '1648881410631270406', NULL, 13, '已阅，无异议。', NULL, '2023-05-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (333, '1648881410243411447', NULL, 13, '已核，无异议。', NULL, '2023-08-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (334, '1648881410510061219', NULL, 13, '已阅核，无异议。', NULL, '2022-06-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (335, '1648881410191852464', NULL, 13, '已阅核，无异议。', NULL, '2022-03-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (336, '1648881410178734144', NULL, 15, '同意签订', NULL, '2020-06-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (337, '1648881410736064124', NULL, 15, '同意办理', NULL, '2020-07-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (338, '1648881410903259030', NULL, 15, '同意办理', NULL, '2020-07-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (339, '1648881415932870657', NULL, 13, '已阅核，无异议。', NULL, '2022-11-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (340, '1648881413093326850', NULL, 13, '已阅核，无异议。', NULL, '2022-03-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (341, '1648881413927993346', NULL, 13, '已阅核，无异议。', NULL, '2022-05-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (342, '1648881410560078279', NULL, 13, '已核。', NULL, '2021-04-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (343, '1648881410851279616', NULL, 15, '拟同意', NULL, '2020-12-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (344, '1648881410860814863', NULL, 15, '同意', NULL, '2021-01-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (345, '1648881416226471938', NULL, 13, '已阅核，无异议。', NULL, '2022-02-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (346, '1648881412753588225', NULL, 13, '已阅核，无异议。', NULL, '2022-11-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (347, '1648881413651169282', NULL, 13, '已核。', NULL, '2022-01-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (348, '1648881411105226753', NULL, 13, '已核。', NULL, '2023-06-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (349, '1648881410514703427', NULL, 13, '已核。', NULL, '2021-01-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (350, '1648881410622133006', NULL, 15, '同意', NULL, '2021-02-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (351, '1648881416721399809', NULL, 13, '已核，无异议。', NULL, '2021-10-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (352, '1648881419070210050', NULL, 13, '已阅核，无异议。', NULL, '2022-07-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (353, '1648881411986030594', NULL, 13, '已阅核，无异议。', NULL, '2022-11-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (354, '1648881412090888194', NULL, 13, '已阅核，无异议。', NULL, '2022-10-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (355, '1648881413328207874', NULL, 13, '已阅核，无异议。', NULL, '2022-03-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (356, '1648881411650486273', NULL, 13, '已阅核，无异议。', NULL, '2022-06-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (357, '1648881414603276289', NULL, 13, '已核，拟同意。', NULL, '2021-10-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (358, '1648881416603959298', NULL, 13, '已阅核，无异议。', NULL, '2023-02-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (359, '1648881410574457575', NULL, 13, '已阅核，无异议。', NULL, '2024-04-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (360, '1648881410532316813', NULL, 13, '已阅核，无异议。', NULL, '2024-04-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (361, '1648881410631270405', NULL, 13, '已核，无异议。', NULL, '2023-04-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (362, '1648881413344985090', NULL, 13, '已阅核，无异议。', NULL, '2022-03-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (363, '1648881410141181829', NULL, 13, '已核。', NULL, '2023-03-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (364, '1648881410631270458', NULL, 13, '已核，无异议。', NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (365, '1648881410631270421', NULL, 13, '已阅核，无异议。', NULL, '2023-04-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (366, '1648881410631270420', NULL, 13, '已核，无异议。', NULL, '2023-11-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (367, '1648881417971302402', NULL, 15, '同意', NULL, '2020-10-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (368, '1648881410707730605', NULL, 13, '已核，无异议。', NULL, '2022-03-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (369, '1648881410871330251', NULL, 13, '已核。', NULL, '2021-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (370, '1648881410584981902', NULL, 15, '同意办理', NULL, '2020-04-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (371, '1648881412363517954', NULL, 13, '已核。', NULL, '2021-07-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (372, '1648881410429524200', NULL, 13, '已核。', NULL, '2021-12-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (373, '1648881410583116216', NULL, 15, '同意', NULL, '2020-10-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (374, '1648881410740602416', NULL, 13, '已阅核，无异议。', NULL, '2022-08-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (375, '1648881412514512898', NULL, 13, '已核，无异议。', NULL, '2023-02-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (376, '1648881410362562566', NULL, 13, '已阅核，无异议。', NULL, '2023-07-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (377, '1648881412736811010', NULL, 13, '已阅核，无异议。', NULL, '2023-01-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (378, '1648881412153802753', NULL, 13, '已核，无异议。', NULL, '2023-03-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (379, '1648881410549017736', NULL, 13, '已阅核，无异议。', NULL, '2023-01-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (380, '1648881412074110977', NULL, 13, '已阅核，无异议。', NULL, '2022-10-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (381, '1648881413181407233', NULL, 13, '已阅核，无异议。', NULL, '2023-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (382, '1648881410952933694', NULL, 15, '同意办理', NULL, '2020-06-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (383, '1648881410389708702', NULL, 15, '同意', NULL, '2020-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (384, '1648881410811731415', NULL, 15, '同意', NULL, '2020-10-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (385, '1648881410572550145', NULL, 13, '已阅核，无异议。', NULL, '2022-07-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (386, '1648881413009440769', NULL, 13, '已阅核。', NULL, '2022-06-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (387, '1648881410787749457', NULL, 15, '同意', NULL, '2020-12-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (388, '1648881411499491359', NULL, 13, '已核，无异议。', NULL, '2023-11-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (389, '1648881410706686589', NULL, 15, '同意', NULL, '2020-01-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (390, '1648881410962635508', NULL, 15, '同意', NULL, '2021-03-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (391, '1648881410861585685', NULL, 13, '已阅核，无异议。', NULL, '2023-12-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (392, '1648881411499491379', NULL, 13, '已核，无异议。', NULL, '2023-08-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (393, '1648881410250539000', NULL, 13, '已阅核，无异议。', NULL, '2022-08-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (394, '1648881410583829702', NULL, 15, NULL, NULL, '2020-04-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (395, '1648881410101329320', NULL, 13, '已核，无异议。', NULL, '2024-03-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (396, '1648881415685406721', NULL, 13, '已核。', NULL, '2021-06-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (397, '1648881417807724546', NULL, 15, '同意', NULL, '2020-12-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (398, '1648881410430800135', NULL, 13, '已核。', NULL, '2021-04-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (399, '1648881410988637056', NULL, 15, '同意', NULL, '2020-09-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (400, '1648881410339742269', NULL, 13, '已阅核，无异议。', NULL, '2023-10-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (401, '1648881410662935365', NULL, 15, '同意办理', NULL, '2020-04-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (402, '1648881410416731296', NULL, 15, '同意', NULL, '2020-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (403, '1648881418399121410', NULL, 15, '同意', NULL, '2020-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (404, '1648881410675101646', NULL, 13, '已阅核，无异议。', NULL, '2022-12-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (405, '1648881410597910958', NULL, 13, '已核。', NULL, '2021-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (406, '1648881412346740737', NULL, 13, '已阅核，无异议。', NULL, '2022-11-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (407, '1648881410256492469', NULL, 13, '已核。', NULL, '2021-04-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (408, '1648881417837084674', NULL, 15, '同意', NULL, '2021-01-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (409, '1648881411138781186', NULL, 13, '已核，该费用已含三维地形面费用，无异议。', NULL, '2023-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (410, '1648881411201695745', NULL, 13, '已核，无异议。', NULL, '2023-05-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (411, '1648881410136853450', NULL, 15, '同意', NULL, '2020-06-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (412, '1648881411772121090', NULL, 13, '已核，无异议。', NULL, '2023-05-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (413, '1648881410631270447', NULL, 13, '已核，无异议。', NULL, '2024-04-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (414, '1648881410162208644', NULL, 13, '已核。', NULL, '2023-05-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (415, '1648881410130524643', NULL, 15, '同意', NULL, '2020-10-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (416, '1648881410400120133', NULL, 13, '已核。', NULL, '2021-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (417, '1648881410350550891', NULL, 13, '已阅核，无异议。', NULL, '2024-01-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (418, '1648881410849374209', NULL, 13, '已核。', NULL, '2023-08-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (419, '1648881411499491341', NULL, 13, '已阅核，无异议。', NULL, '2023-12-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (420, '1648881410923839163', NULL, 13, '已阅核，无异议。', NULL, '2022-07-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (421, '1648881410974125570', NULL, 13, '已阅核，无异议。', NULL, '2024-04-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (422, '1648881412220911618', NULL, 13, '已核，无异议。', NULL, '2023-10-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (423, '1648881410678892336', NULL, 13, '已核，无异议。', NULL, '2022-05-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (424, '1648881410833955924', NULL, 15, '拟同意', NULL, '2020-11-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (425, '1648881410631270422', NULL, 13, '已核，无异议。', NULL, '2022-09-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (426, '1648881412984274945', NULL, 13, '已阅核，无异议。', NULL, '2022-05-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (427, '1648881418822746114', NULL, 15, '同意办理', NULL, '2020-06-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (428, '1648881418793385986', NULL, 13, '已核。', NULL, '2021-04-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (429, '1648881410983497326', NULL, 15, '同意', NULL, '2020-05-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (430, '1648881412107665410', NULL, 15, '拟同意', NULL, '2020-11-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (431, '1648881410924523895', NULL, 15, '同意办理', NULL, '2020-09-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (432, '1648881410631270456', NULL, 15, '同意办理', NULL, '2020-07-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (433, '1648881411050700802', NULL, 13, '已核。', NULL, '2023-06-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (434, '1648881415895121921', NULL, 13, '已核。', NULL, '2021-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (435, '1648881415668629506', NULL, 13, '已核。', NULL, '2022-01-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (436, '1648881418764025857', NULL, 13, '已核。', NULL, '2021-05-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (437, '1648881414859128834', NULL, 13, '已阅核，无异议。', NULL, '2022-02-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (438, '1648881415911899138', NULL, 13, '已核。', NULL, '2021-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (439, '1648881410287503999', NULL, 13, '已核。', NULL, '2021-05-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (440, '1648881410303095423', NULL, 15, '拟同意', NULL, '2020-04-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (441, '1648881410631270457', NULL, 15, '同意办理', NULL, '2020-05-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (442, '1648881415727349761', NULL, 13, '已核。', NULL, '2021-06-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (443, '1648881416759148545', NULL, 15, '同意', NULL, '2021-01-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (444, '1648881410631270407', NULL, 13, '已核，无异议。', NULL, '2023-06-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (445, '1648881416029339649', NULL, 13, '已核。', NULL, '2021-05-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (446, '1648881418592059394', NULL, 15, '同意', NULL, '2020-09-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (447, '1648881414905266178', NULL, 13, '已核。', NULL, '2022-01-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (448, '1648881411562405890', NULL, 13, '已核，无异议。', NULL, '2023-03-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (449, '1648881410447192454', NULL, 13, '已核，无异议。', NULL, '2023-03-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (450, '1648881410985319268', NULL, 13, '已阅核，无异议。', NULL, '2024-01-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (451, '1648881415475691522', NULL, 13, '已核。', NULL, '2021-09-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (452, '1648881410563023365', NULL, 13, '已核。', NULL, '2021-11-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (453, '1648881410855458250', NULL, 13, '已核。', NULL, '2021-10-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (454, '1648881410800220669', NULL, 15, '同意办理', NULL, '2020-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (455, '1648881410800377254', NULL, 13, '已核。', NULL, '2021-07-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (456, '1648881410220262588', NULL, 15, '同意', NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (457, '1648881410649435558', NULL, 13, '已核，无异议。', NULL, '2024-03-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (458, '1648881410623897347', NULL, 13, '已核。', NULL, '2021-06-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (459, '1648881410819737242', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (460, '1648881418227154945', NULL, 15, '同意', NULL, '2020-08-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (461, '1648881410103478283', NULL, 13, '已核。', NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (462, '1648881410887847807', NULL, 13, '已阅核，无异议。', NULL, '2022-12-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (463, '1648881410727739393', NULL, 13, '已阅核，无异议。', NULL, '2023-09-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (464, '1648881410486906555', NULL, 15, '同意', NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (465, '1648881410461901082', NULL, 15, '同意办理', NULL, '2020-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (466, '1648881410731507845', NULL, 13, '已核。', NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (467, '1648881410114745619', NULL, 13, '已核。', NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (468, '1648881414695550978', NULL, 13, '已阅核，无异议。', NULL, '2022-02-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (469, '1648881411751149569', NULL, 13, '已核，无异议。', NULL, '2023-08-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (470, '1648881416377466882', NULL, 13, '已核，同意办理。', NULL, '2021-09-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (471, '1648881410906027454', NULL, 13, '已核，无异议。', NULL, '2023-08-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (472, '1648881410890414687', NULL, 15, '同意办理', NULL, '2020-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (473, '1648881410250875590', NULL, 15, '同意办理', NULL, '2019-10-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (474, '1648881414582304770', NULL, 13, '已阅核，无异议。', NULL, '2022-06-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (475, '1648881410124643515', NULL, 15, '同意', NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (476, '1648881410702539390', NULL, 15, '合同商务条款无问题，同意签订', NULL, '2020-03-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (477, '1648881410416524017', NULL, 15, NULL, NULL, '2020-04-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (478, '1648881410631270455', NULL, 15, '同意', NULL, '2021-01-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (479, '1648881410631270412', NULL, 13, '已阅核，无异议。', NULL, '2023-04-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (480, '1648881413030412290', NULL, 13, '已阅核，无异议。', NULL, '2022-06-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (481, '1648881410421236154', NULL, 15, '同意办理', NULL, '2020-05-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (482, '1648881411499491349', NULL, 13, '已核，无异议。', NULL, '2023-12-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (483, '1648881410631270429', NULL, 13, '已核，无异议。', NULL, '2024-03-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (484, '1648881410319337004', NULL, 13, '已核。', NULL, '2021-05-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (485, '1648881410490192033', NULL, 13, '已阅核，无异议。', NULL, '2022-03-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (486, '1658881410780762919', NULL, 13, '已核，无异议。', NULL, '2024-06-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (487, '1648881416411021314', NULL, 13, '已核。', NULL, '2021-03-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (488, '1648881416444575746', NULL, 13, '已核，', NULL, '2021-03-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (489, '1648881411000369153', NULL, 13, '已核。', NULL, '2023-07-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (490, '1648881416427798530', NULL, 13, '已核。', NULL, '2021-08-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (491, '1648881418608836610', NULL, 13, '已核。', NULL, '2021-12-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (492, '1648881410477612473', NULL, 13, '已阅核，无异议。', NULL, '2023-09-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (493, '1648881411235250178', NULL, 13, '已核。', NULL, '2023-07-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (494, '1648881414641025025', NULL, 13, '已阅核，无异议。', NULL, '2022-07-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (495, '1648881416213889025', NULL, 13, '已阅核，无异议。', NULL, '2022-04-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (496, '1648881417472180225', NULL, 15, '拟同意', NULL, '2020-11-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (497, '1648881411138781188', NULL, 13, '已核，无异议。', NULL, '2024-03-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (498, '1648881410898434330', NULL, 13, '已阅核，无异议。', NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (499, '1648881410933291569', NULL, 13, '已阅核，无异议。', NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (500, '1648881410843124272', NULL, 13, '已阅核，无异议。', NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (501, '1648881410107603516', NULL, 13, '已核。', NULL, '2023-07-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (502, '1648881411809869825', NULL, 13, '已核，无异议。', NULL, '2023-03-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (503, '1648881410834841431', NULL, 13, '已阅核，无异议。', NULL, '2022-12-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (504, '1648881410393321188', NULL, 15, '同意', NULL, '2020-08-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (505, '1648881410710962177', NULL, 13, '已核，无异议。', NULL, '2023-08-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (506, '1648881410719146467', NULL, 13, '已核。', NULL, '2021-04-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (507, '1648881417044361218', NULL, 13, '已阅核，无异议。', NULL, '2022-03-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (508, '1648881416260026369', NULL, 13, '已阅核，无异议。', NULL, '2022-03-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (509, '1648881410489890606', NULL, 13, '已阅核，无异议。', NULL, '2023-02-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (510, '1648881411499491337', NULL, 13, '已阅核，无异议。', NULL, '2023-11-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (511, '1648881410801314792', NULL, 13, '已核，无异议。', NULL, '2021-09-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (512, '1648881410163021188', NULL, 13, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (513, '1648881410482291380', NULL, 13, '已阅核。', NULL, '2022-06-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (514, '1648881410942593459', NULL, 13, '已核。', NULL, '2021-11-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (515, '1648881410696862705', NULL, 13, '已核，无异议。', NULL, '2021-11-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (516, '1648881410126142724', NULL, 15, '同意', NULL, '2020-09-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (517, '1648881410309053516', NULL, 15, '同意', NULL, '2021-01-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (518, '1648881410214518639', NULL, 13, '已阅核，无异议。', NULL, '2023-12-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (519, '1648881411885367297', NULL, 13, '已核，只签部分工作量，剩余部分再从其他合同考虑。', NULL, '2023-09-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (520, '1648881410118132314', NULL, 15, '同意', NULL, '2020-08-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (521, '1648881410545293791', NULL, 13, '已核，乙方违约处建议加上“除不可抗力除外”', NULL, '2021-12-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (522, '1648881410830329044', NULL, 13, '已核，无异议。', NULL, '2021-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (523, '1648881410908090468', NULL, 13, '已核。', NULL, '2021-09-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (524, '1648881410192970032', NULL, 15, '同意办理', NULL, '2020-05-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (525, '1648881410696485210', NULL, 15, '同意办理', NULL, '2020-08-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (526, '1648881410162868926', NULL, 13, '已核。', NULL, '2021-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (527, '1648881410263993280', NULL, 13, '已核。', NULL, '2021-06-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (528, '1648881410615368699', NULL, 13, '已核。', NULL, '2021-05-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (529, '1648881410388432085', NULL, 15, '同意办理', NULL, '2020-06-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (530, '1648881410388432085', NULL, 50, '同意。', NULL, '2020-06-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (531, '1648881410388432085', NULL, 14, NULL, NULL, '2020-06-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (532, '1648881410615368699', NULL, 50, '同意。', NULL, '2021-05-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (533, '1648881410615368699', NULL, 14, NULL, NULL, '2021-05-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (534, '1648881410263993280', NULL, 50, '同意。', NULL, '2021-06-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (535, '1648881410263993280', NULL, 14, NULL, NULL, '2021-06-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (536, '1648881410162868926', NULL, 50, '同意。', NULL, '2021-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (537, '1648881410162868926', NULL, 14, NULL, NULL, '2021-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (538, '1648881410696485210', NULL, 50, '同意。', NULL, '2020-08-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (539, '1648881410696485210', NULL, 14, NULL, NULL, '2020-08-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (540, '1648881410192970032', NULL, 50, '同意。', NULL, '2020-04-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (541, '1648881410192970032', NULL, 14, NULL, NULL, '2020-04-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (542, '1648881410908090468', NULL, 50, '同意。', NULL, '2021-09-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (543, '1648881410908090468', NULL, 14, NULL, NULL, '2021-09-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (544, '1648881410830329044', NULL, 50, '同意。', NULL, '2021-10-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (545, '1648881410830329044', NULL, 14, NULL, NULL, '2021-10-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (546, '1648881410545293791', NULL, 50, '同意。', NULL, '2021-12-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (547, '1648881410545293791', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (548, '1648881410118132314', NULL, 50, '同意。', NULL, '2020-08-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (549, '1648881410118132314', NULL, 14, NULL, NULL, '2020-08-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (550, '1648881411885367297', NULL, 46, '同意。', NULL, '2023-09-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (551, '1648881411885367297', NULL, 14, NULL, NULL, '2023-09-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (552, '1648881410214518639', NULL, 46, '同意。', NULL, '2023-12-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (553, '1648881410214518639', NULL, 14, NULL, NULL, '2023-12-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (554, '1648881410309053516', NULL, 50, '同意。', NULL, '2021-01-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (555, '1648881410309053516', NULL, 14, NULL, NULL, '2021-01-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (556, '1648881410126142724', NULL, 50, '同意。', NULL, '2020-09-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (557, '1648881410126142724', NULL, 14, NULL, NULL, '2020-09-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (558, '1648881410696862705', NULL, 50, '同意。', NULL, '2021-11-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (559, '1648881410696862705', NULL, 14, NULL, NULL, '2021-11-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (560, '1648881410942593459', NULL, 50, '同意。', NULL, '2021-11-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (561, '1648881410942593459', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (562, '1648881410482291380', NULL, 50, '同意。', NULL, '2022-06-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (563, '1648881410482291380', NULL, 14, NULL, NULL, '2022-06-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (564, '1648881410163021188', NULL, 46, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (565, '1648881410163021188', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (566, '1648881410801314792', NULL, 50, '同意。', NULL, '2021-09-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (567, '1648881410801314792', NULL, 14, NULL, NULL, '2021-09-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (568, '1648881411499491337', NULL, 46, '同意。', NULL, '2023-11-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (569, '1648881411499491337', NULL, 14, NULL, NULL, '2023-11-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (570, '1648881410489890606', NULL, 46, '同意。', NULL, '2023-02-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (571, '1648881410489890606', NULL, 14, NULL, NULL, '2023-02-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (572, '1648881416260026369', NULL, 50, '同意。', NULL, '2022-03-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (573, '1648881416260026369', NULL, 14, NULL, NULL, '2022-03-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (574, '1648881417044361218', NULL, 50, '同意。', NULL, '2022-03-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (575, '1648881417044361218', NULL, 14, NULL, NULL, '2022-03-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (576, '1648881410719146467', NULL, 50, '同意。', NULL, '2021-04-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (577, '1648881410719146467', NULL, 14, NULL, NULL, '2021-04-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (578, '1648881410710962177', NULL, 46, '同意。', NULL, '2023-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (579, '1648881410710962177', NULL, 14, NULL, NULL, '2023-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (580, '1648881410393321188', NULL, 50, '同意。', NULL, '2020-08-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (581, '1648881410393321188', NULL, 14, NULL, NULL, '2020-08-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (582, '1648881410834841431', NULL, 46, '同意。', NULL, '2022-12-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (583, '1648881410834841431', NULL, 14, NULL, NULL, '2021-12-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (584, '1648881411809869825', NULL, 46, '同意。', NULL, '2023-03-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (585, '1648881411809869825', NULL, 14, NULL, NULL, '2023-03-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (586, '1648881410107603516', NULL, 46, '同意。', NULL, '2023-07-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (587, '1648881410107603516', NULL, 14, NULL, NULL, '2023-07-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (588, '1648881410843124272', NULL, 50, '同意。', NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (589, '1648881410843124272', NULL, 14, NULL, NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (590, '1648881410933291569', NULL, 50, '同意。', NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (591, '1648881410933291569', NULL, 14, NULL, NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (592, '1648881410898434330', NULL, 50, '同意。', NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (593, '1648881410898434330', NULL, 14, NULL, NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (594, '1648881411138781188', NULL, 46, '已核。', NULL, '2024-03-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (595, '1648881411138781188', NULL, 14, NULL, NULL, '2024-03-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (596, '1648881417472180225', NULL, 50, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (597, '1648881417472180225', NULL, 14, NULL, NULL, '2020-11-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (598, '1648881416213889025', NULL, 50, '同意。', NULL, '2022-04-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (599, '1648881416213889025', NULL, 14, NULL, NULL, '2022-04-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (600, '1648881414641025025', NULL, 50, '同意。', NULL, '2022-07-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (601, '1648881414641025025', NULL, 14, NULL, NULL, '2022-07-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (602, '1648881411235250178', NULL, 46, '同意。', NULL, '2023-07-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (603, '1648881411235250178', NULL, 14, NULL, NULL, '2023-07-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (604, '1648881410477612473', NULL, 46, '同意。', NULL, '2023-09-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (605, '1648881410477612473', NULL, 14, NULL, NULL, '2023-09-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (606, '1648881418608836610', NULL, 50, '同意。', NULL, '2021-12-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (607, '1648881418608836610', NULL, 14, NULL, NULL, '2021-12-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (608, '1648881416427798530', NULL, 50, '同意。', NULL, '2021-08-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (609, '1648881416427798530', NULL, 14, NULL, NULL, '2021-08-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (610, '1648881411000369153', NULL, 46, '同意。', NULL, '2023-07-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (611, '1648881411000369153', NULL, 14, NULL, NULL, '2023-07-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (612, '1648881416444575746', NULL, 50, '同意。', NULL, '2021-03-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (613, '1648881416444575746', NULL, 14, NULL, NULL, '2021-03-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (614, '1648881416411021314', NULL, 50, '同意。', NULL, '2021-03-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (615, '1648881416411021314', NULL, 14, NULL, NULL, '2021-03-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (616, '1658881410780762919', NULL, 46, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (617, '1658881410780762919', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (618, '1648881410490192033', NULL, 50, '同意。', NULL, '2022-03-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (619, '1648881410490192033', NULL, 14, NULL, NULL, '2022-04-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (620, '1648881410319337004', NULL, 50, '同意。', NULL, '2021-05-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (621, '1648881410319337004', NULL, 14, NULL, NULL, '2021-05-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (622, '1648881410631270429', NULL, 46, '已核。', NULL, '2024-03-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (623, '1648881410631270429', NULL, 14, NULL, NULL, '2024-03-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (624, '1648881411499491349', NULL, 46, '同意。', NULL, '2023-12-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (625, '1648881411499491349', NULL, 14, NULL, NULL, '2023-12-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (626, '1648881410421236154', NULL, 50, '同意。', NULL, '2020-05-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (627, '1648881410421236154', NULL, 14, NULL, NULL, '2020-05-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (628, '1648881413030412290', NULL, 50, '同意。', NULL, '2022-06-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (629, '1648881413030412290', NULL, 14, NULL, NULL, '2022-06-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (630, '1648881410631270412', NULL, 46, '同意。', NULL, '2023-04-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (631, '1648881410631270412', NULL, 14, NULL, NULL, '2023-04-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (632, '1648881410631270455', NULL, 50, '同意。', NULL, '2021-01-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (633, '1648881410631270455', NULL, 14, NULL, NULL, '2021-01-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (634, '1648881410416524017', NULL, 50, 'GB/T 20257.1－2007应更新为GB/T 20257.1－2017', NULL, '2020-04-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (635, '1648881410416524017', NULL, 14, NULL, NULL, '2020-04-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (636, '1648881410702539390', NULL, 50, '同意。', NULL, '2020-03-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (637, '1648881410702539390', NULL, 14, NULL, NULL, '2020-03-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (638, '1648881410124643515', NULL, 50, '同意。', NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (639, '1648881410124643515', NULL, 14, NULL, NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (640, '1648881414582304770', NULL, 46, NULL, NULL, '2022-06-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (641, '1648881414582304770', NULL, 14, NULL, NULL, '2022-06-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (642, '1648881410250875590', NULL, 50, '同意。', NULL, '2019-10-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (643, '1648881410250875590', NULL, 14, NULL, NULL, '2019-10-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (644, '1648881410890414687', NULL, 50, '同意。', NULL, '2020-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (645, '1648881410890414687', NULL, 14, NULL, NULL, '2020-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (646, '1648881410906027454', NULL, 46, '同意。', NULL, '2023-08-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (647, '1648881410906027454', NULL, 14, NULL, NULL, '2023-08-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (648, '1648881416377466882', NULL, 50, '同意。', NULL, '2021-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (649, '1648881416377466882', NULL, 14, NULL, NULL, '2021-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (650, '1648881411751149569', NULL, 46, '同意。', NULL, '2023-08-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (651, '1648881411751149569', NULL, 14, NULL, NULL, '2023-08-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (652, '1648881414695550978', NULL, 50, '同意。', NULL, '2022-02-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (653, '1648881414695550978', NULL, 14, NULL, NULL, '2022-02-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (654, '1648881410114745619', NULL, 46, '同意。', NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (655, '1648881410114745619', NULL, 14, NULL, NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (656, '1648881410731507845', NULL, 46, '同意。', NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (657, '1648881410731507845', NULL, 14, NULL, NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (658, '1648881410461901082', NULL, 50, '同意。', NULL, '2020-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (659, '1648881410461901082', NULL, 14, NULL, NULL, '2020-06-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (660, '1648881410486906555', NULL, 50, '同意。', NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (661, '1648881410486906555', NULL, 14, NULL, NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (662, '1648881410727739393', NULL, 46, '同意。', NULL, '2023-08-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (663, '1648881410727739393', NULL, 14, NULL, NULL, '2023-08-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (664, '1648881410887847807', NULL, 46, '同意。', NULL, '2022-12-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (665, '1648881410887847807', NULL, 14, NULL, NULL, '2022-12-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (666, '1648881410103478283', NULL, 46, '同意。', NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (667, '1648881410103478283', NULL, 14, NULL, NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (668, '1648881418227154945', NULL, 50, '同意', NULL, '2020-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (669, '1648881418227154945', NULL, 14, NULL, NULL, '2020-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (670, '1648881410819737242', NULL, 46, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (671, '1648881410819737242', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (672, '1648881410623897347', NULL, 50, '同意。', NULL, '2021-06-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (673, '1648881410623897347', NULL, 14, NULL, NULL, '2021-06-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (674, '1648881410649435558', NULL, 46, '已核。', NULL, '2024-03-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (675, '1648881410649435558', NULL, 14, NULL, NULL, '2024-03-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (676, '1648881410220262588', NULL, 50, '同意。', NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (677, '1648881410220262588', NULL, 14, NULL, NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (678, '1648881410800377254', NULL, 50, '同意。', NULL, '2021-07-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (679, '1648881410800377254', NULL, 14, NULL, NULL, '2021-07-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (680, '1648881410800220669', NULL, 50, '同意。', NULL, '2020-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (681, '1648881410800220669', NULL, 14, NULL, NULL, '2020-06-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (682, '1648881410855458250', NULL, 50, '同意。', NULL, '2021-10-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (683, '1648881410855458250', NULL, 14, NULL, NULL, '2021-10-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (684, '1648881410563023365', NULL, 50, '同意。', NULL, '2021-11-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (685, '1648881410563023365', NULL, 14, NULL, NULL, '2021-11-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (686, '1648881415475691522', NULL, 50, '同意。', NULL, '2021-09-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (687, '1648881415475691522', NULL, 14, NULL, NULL, '2021-09-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (688, '1648881410985319268', NULL, 46, '同意。', NULL, '2024-01-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (689, '1648881410985319268', NULL, 14, NULL, NULL, '2024-01-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (690, '1648881410447192454', NULL, 46, '同意。', NULL, '2023-03-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (691, '1648881410447192454', NULL, 14, NULL, NULL, '2023-03-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (692, '1648881411562405890', NULL, 46, '同意。', NULL, '2023-03-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (693, '1648881411562405890', NULL, 14, NULL, NULL, '2023-03-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (694, '1648881414905266178', NULL, 50, '同意。', NULL, '2022-01-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (695, '1648881414905266178', NULL, 14, NULL, NULL, '2022-01-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (696, '1648881418592059394', NULL, 50, '同意。', NULL, '2020-09-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (697, '1648881418592059394', NULL, 14, NULL, NULL, '2020-09-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (698, '1648881416029339649', NULL, 50, '同意。', NULL, '2021-05-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (699, '1648881416029339649', NULL, 14, NULL, NULL, '2021-05-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (700, '1648881410631270407', NULL, 46, '同意。', NULL, '2023-06-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (701, '1648881410631270407', NULL, 14, NULL, NULL, '2023-06-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (702, '1648881416759148545', NULL, 50, '同意。', NULL, '2021-01-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (703, '1648881416759148545', NULL, 14, NULL, NULL, '2021-01-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (704, '1648881415727349761', NULL, 50, '同意。', NULL, '2021-06-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (705, '1648881415727349761', NULL, 14, NULL, NULL, '2021-06-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (706, '1648881410631270457', NULL, 50, '同意。', NULL, '2020-04-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (707, '1648881410631270457', NULL, 14, NULL, NULL, '2020-04-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (708, '1648881410303095423', NULL, 50, '同意。', NULL, '2020-04-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (709, '1648881410303095423', NULL, 14, NULL, NULL, '2020-04-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (710, '1648881410287503999', NULL, 50, '同意。', NULL, '2021-05-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (711, '1648881410287503999', NULL, 14, NULL, NULL, '2021-05-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (712, '1648881415911899138', NULL, 50, '同意。', NULL, '2021-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (713, '1648881415911899138', NULL, 14, NULL, NULL, '2021-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (714, '1648881414859128834', NULL, 50, '同意。', NULL, '2022-02-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (715, '1648881414859128834', NULL, 14, NULL, NULL, '2022-02-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (716, '1648881418764025857', NULL, 50, '同意。', NULL, '2021-05-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (717, '1648881418764025857', NULL, 14, NULL, NULL, '2021-05-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (718, '1648881415668629506', NULL, 50, '同意。', NULL, '2022-01-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (719, '1648881415668629506', NULL, 14, NULL, NULL, '2022-01-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (720, '1648881415895121921', NULL, 50, '同意。', NULL, '2021-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (721, '1648881415895121921', NULL, 14, NULL, NULL, '2021-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (722, '1648881411050700802', NULL, 46, '同意。', NULL, '2023-06-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (723, '1648881411050700802', NULL, 14, NULL, NULL, '2023-06-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (724, '1648881416360689665', NULL, 50, '同意。', NULL, '2021-03-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (725, '1648881416360689665', NULL, 14, NULL, NULL, '2021-03-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (726, '1648881410631270456', NULL, 50, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (727, '1648881410631270456', NULL, 14, NULL, NULL, '2020-07-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (728, '1648881410924523895', NULL, 50, '同意。', NULL, '2020-09-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (729, '1648881410924523895', NULL, 14, NULL, NULL, '2020-09-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (730, '1648881412107665410', NULL, 50, '同意。', NULL, '2020-11-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (731, '1648881412107665410', NULL, 14, NULL, NULL, '2020-11-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (732, '1648881410983497326', NULL, 50, '同意。', NULL, '2020-05-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (733, '1648881410983497326', NULL, 14, NULL, NULL, '2020-05-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (734, '1648881418793385986', NULL, 50, '同意。', NULL, '2021-04-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (735, '1648881418793385986', NULL, 14, NULL, NULL, '2021-04-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (736, '1648881418822746114', NULL, 50, '同意。', NULL, '2020-06-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (737, '1648881418822746114', NULL, 14, NULL, NULL, '2020-06-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (738, '1648881412984274945', NULL, 50, '同意。', NULL, '2022-05-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (739, '1648881412984274945', NULL, 14, NULL, NULL, '2022-05-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (740, '1648881410631270422', NULL, 46, '同意。', NULL, '2022-09-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (741, '1648881410631270422', NULL, 14, NULL, NULL, '2022-09-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (742, '1648881410833955924', NULL, 50, '同意。', NULL, '2020-11-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (743, '1648881410833955924', NULL, 14, NULL, NULL, '2020-11-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (744, '1648881410678892336', NULL, 50, '同意。', NULL, '2022-05-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (745, '1648881410678892336', NULL, 14, NULL, NULL, '2022-05-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (746, '1648881412220911618', NULL, 46, '同意。', NULL, '2023-10-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (747, '1648881412220911618', NULL, 14, NULL, NULL, '2023-10-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (748, '1648881410974125570', NULL, 46, '同意。', NULL, '2024-04-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (749, '1648881410974125570', NULL, 14, NULL, NULL, '2024-04-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (750, '1648881410923839163', NULL, 50, '同意。', NULL, '2022-07-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (751, '1648881410923839163', NULL, 14, NULL, NULL, '2022-07-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (752, '1648881411499491341', NULL, 46, '同意。', NULL, '2023-12-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (753, '1648881411499491341', NULL, 14, NULL, NULL, '2023-12-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (754, '1648881410849374209', NULL, 46, '同意。', NULL, '2023-08-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (755, '1648881410849374209', NULL, 14, NULL, NULL, '2023-08-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (756, '1648881410350550891', NULL, 46, '同意。', NULL, '2024-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (757, '1648881410350550891', NULL, 14, NULL, NULL, '2024-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (758, '1648881410400120133', NULL, 50, '同意。', NULL, '2021-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (759, '1648881410400120133', NULL, 14, NULL, NULL, '2021-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (760, '1648881410130524643', NULL, 50, '同意。', NULL, '2020-10-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (761, '1648881410130524643', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (762, '1648881410162208644', NULL, 46, '同意。', NULL, '2023-05-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (763, '1648881410162208644', NULL, 14, NULL, NULL, '2023-05-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (764, '1648881410631270447', NULL, 46, '已核。', NULL, '2024-04-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (765, '1648881410631270447', NULL, 14, NULL, NULL, '2024-04-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (766, '1648881411772121090', NULL, 46, '同意。', NULL, '2023-05-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (767, '1648881411772121090', NULL, 14, NULL, NULL, '2023-05-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (768, '1648881410136853450', NULL, 50, '同意。', NULL, '2020-06-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (769, '1648881410136853450', NULL, 14, NULL, NULL, '2020-06-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (770, '1648881411201695745', NULL, 46, '同意。', NULL, '2023-05-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (771, '1648881411201695745', NULL, 14, NULL, NULL, '2023-05-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (772, '1648881411138781186', NULL, 46, '同意。', NULL, '2023-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (773, '1648881411138781186', NULL, 14, NULL, NULL, '2023-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (774, '1648881417837084674', NULL, 50, '同意。', NULL, '2021-01-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (775, '1648881417837084674', NULL, 14, NULL, NULL, '2021-01-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (776, '1648881410256492469', NULL, 50, '同意。', NULL, '2021-04-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (777, '1648881410256492469', NULL, 14, NULL, NULL, '2021-04-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (778, '1648881412346740737', NULL, 46, '同意。', NULL, '2022-11-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (779, '1648881412346740737', NULL, 14, NULL, NULL, '2022-11-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (780, '1648881410597910958', NULL, 50, '同意。', NULL, '2021-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (781, '1648881410597910958', NULL, 14, NULL, NULL, '2021-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (782, '1648881410675101646', NULL, 46, '同意。', NULL, '2022-12-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (783, '1648881410675101646', NULL, 14, NULL, NULL, '2022-12-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (784, '1648881418399121410', NULL, 50, '同意。', NULL, '2020-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (785, '1648881418399121410', NULL, 14, NULL, NULL, '2020-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (786, '1648881410416731296', NULL, 50, '同意。', NULL, '2020-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (787, '1648881410416731296', NULL, 14, NULL, NULL, '2020-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (788, '1648881410662935365', NULL, 50, '同意。', NULL, '2020-04-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (789, '1648881410662935365', NULL, 14, NULL, NULL, '2020-04-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (790, '1648881410339742269', NULL, 46, '同意。', NULL, '2023-10-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (791, '1648881410339742269', NULL, 14, NULL, NULL, '2023-10-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (792, '1648881410988637056', NULL, 50, '同意。', NULL, '2020-09-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (793, '1648881410988637056', NULL, 14, NULL, NULL, '2020-09-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (794, '1648881410430800135', NULL, 50, '同意。', NULL, '2021-04-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (795, '1648881410430800135', NULL, 14, NULL, NULL, '2021-04-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (796, '1648881417807724546', NULL, 50, '同意。', NULL, '2020-12-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (797, '1648881417807724546', NULL, 14, NULL, NULL, '2020-12-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (798, '1648881415685406721', NULL, 50, '同意。', NULL, '2021-06-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (799, '1648881415685406721', NULL, 14, NULL, NULL, '2021-06-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (800, '1648881410101329320', NULL, 46, '已核。', NULL, '2024-03-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (801, '1648881410101329320', NULL, 14, NULL, NULL, '2024-03-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (802, '1648881410583829702', NULL, 50, '同意。', NULL, '2020-04-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (803, '1648881410583829702', NULL, 14, NULL, NULL, '2020-04-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (804, '1648881410583829702', NULL, 7, '同意', NULL, '2020-04-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (805, '1648881410250539000', NULL, 46, '同意办理。', NULL, '2022-08-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (806, '1648881410250539000', NULL, 14, NULL, NULL, '2022-08-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (807, '1648881411499491379', NULL, 46, '同意。', NULL, '2023-08-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (808, '1648881411499491379', NULL, 14, NULL, NULL, '2023-08-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (809, '1648881410861585685', NULL, 46, '同意。', NULL, '2023-12-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (810, '1648881410861585685', NULL, 14, NULL, NULL, '2023-12-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (811, '1648881410962635508', NULL, 50, '同意。', NULL, '2021-03-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (812, '1648881410962635508', NULL, 14, NULL, NULL, '2021-03-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (813, '1648881410706686589', NULL, 50, '同意', NULL, '2020-01-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (814, '1648881410706686589', NULL, 14, NULL, NULL, '2020-01-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (815, '1648881411499491359', NULL, 46, '同意。', NULL, '2023-11-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (816, '1648881411499491359', NULL, 14, NULL, NULL, '2023-11-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (817, '1648881410787749457', NULL, 50, '同意。', NULL, '2020-12-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (818, '1648881410787749457', NULL, 14, NULL, NULL, '2020-12-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (819, '1648881413009440769', NULL, 46, '同意。', NULL, '2022-08-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (820, '1648881413009440769', NULL, 14, NULL, NULL, '2022-06-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (821, '1648881410572550145', NULL, 50, '同意。', NULL, '2022-07-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (822, '1648881410572550145', NULL, 14, NULL, NULL, '2022-07-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (823, '1648881410811731415', NULL, 50, '同意。', NULL, '2020-10-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (824, '1648881410811731415', NULL, 14, NULL, NULL, '2020-10-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (825, '1648881410389708702', NULL, 50, '同意。', NULL, '2020-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (826, '1648881410389708702', NULL, 14, NULL, NULL, '2020-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (827, '1648881410952933694', NULL, 50, NULL, NULL, '2020-06-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (828, '1648881410952933694', NULL, 14, NULL, NULL, '2020-06-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (829, '1648881413181407233', NULL, 46, '同意。', NULL, '2023-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (830, '1648881413181407233', NULL, 14, NULL, NULL, '2023-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (831, '1648881412074110977', NULL, 46, '同意。', NULL, '2022-10-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (832, '1648881412074110977', NULL, 14, NULL, NULL, '2022-10-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (833, '1648881410549017736', NULL, 46, '同意。', NULL, '2023-01-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (834, '1648881410549017736', NULL, 14, NULL, NULL, '2023-01-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (835, '1648881412153802753', NULL, 46, '同意。', NULL, '2023-03-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (836, '1648881412153802753', NULL, 14, NULL, NULL, '2023-03-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (837, '1648881412736811010', NULL, 46, '同意。', NULL, '2023-01-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (838, '1648881412736811010', NULL, 14, NULL, NULL, '2023-01-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (839, '1648881410362562566', NULL, 46, '同意。', NULL, '2023-07-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (840, '1648881410362562566', NULL, 14, NULL, NULL, '2023-07-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (841, '1648881412514512898', NULL, 46, '同意。', NULL, '2023-02-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (842, '1648881412514512898', NULL, 14, NULL, NULL, '2023-02-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (843, '1648881410740602416', NULL, 46, NULL, NULL, '2022-08-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (844, '1648881410740602416', NULL, 14, NULL, NULL, '2022-08-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (845, '1648881410583116216', NULL, 50, '同意。', NULL, '2020-10-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (846, '1648881410583116216', NULL, 14, NULL, NULL, '2020-10-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (847, '1648881410429524200', NULL, 50, '同意。', NULL, '2021-12-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (848, '1648881410429524200', NULL, 14, NULL, NULL, '2021-12-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (849, '1648881412363517954', NULL, 50, '同意。', NULL, '2021-07-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (850, '1648881412363517954', NULL, 14, NULL, NULL, '2021-07-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (851, '1648881410584981902', NULL, 50, '同意。', NULL, '2020-04-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (852, '1648881410584981902', NULL, 14, NULL, NULL, '2020-04-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (853, '1648881410871330251', NULL, 50, '同意。', NULL, '2021-09-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (854, '1648881410871330251', NULL, 14, NULL, NULL, '2021-09-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (855, '1648881410707730605', NULL, 50, '同意。', NULL, '2022-03-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (856, '1648881410707730605', NULL, 14, NULL, NULL, '2022-03-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (857, '1648881417971302402', NULL, 50, '同意。', NULL, '2020-10-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (858, '1648881417971302402', NULL, 14, NULL, NULL, '2020-10-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (859, '1648881410631270420', NULL, 46, '同意。', NULL, '2023-11-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (860, '1648881410631270420', NULL, 14, NULL, NULL, '2023-11-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (861, '1648881410631270421', NULL, 46, '同意。', NULL, '2023-04-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (862, '1648881410631270421', NULL, 14, NULL, NULL, '2023-04-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (863, '1648881410631270458', NULL, 50, '同意。', NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (864, '1648881410631270458', NULL, 14, NULL, NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (865, '1648881410141181829', NULL, 46, '同意。', NULL, '2023-03-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (866, '1648881410141181829', NULL, 14, NULL, NULL, '2023-03-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (867, '1648881413344985090', NULL, 50, '同意。', NULL, '2022-03-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (868, '1648881413344985090', NULL, 14, NULL, NULL, '2022-03-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (869, '1648881410631270405', NULL, 46, '同意。', NULL, '2023-04-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (870, '1648881410631270405', NULL, 14, NULL, NULL, '2023-04-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (871, '1648881410532316813', NULL, 46, '已核。', NULL, '2024-04-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (872, '1648881410532316813', NULL, 14, NULL, NULL, '2024-04-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (873, '1648881410574457575', NULL, 46, '已核。', NULL, '2024-04-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (874, '1648881410574457575', NULL, 14, NULL, NULL, '2024-04-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (875, '1648881416603959298', NULL, 46, '同意。', NULL, '2023-02-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (876, '1648881416603959298', NULL, 14, NULL, NULL, '2023-02-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (877, '1648881414603276289', NULL, 50, '同意。', NULL, '2021-10-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (878, '1648881414603276289', NULL, 14, NULL, NULL, '2021-10-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (879, '1648881411650486273', NULL, 50, '同意。', NULL, '2022-06-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (880, '1648881411650486273', NULL, 14, NULL, NULL, '2022-06-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (881, '1648881413328207874', NULL, 50, '同意。', NULL, '2022-03-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (882, '1648881413328207874', NULL, 14, NULL, NULL, '2022-03-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (883, '1648881412090888194', NULL, 46, '同意。', NULL, '2022-10-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (884, '1648881412090888194', NULL, 14, NULL, NULL, '2022-10-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (885, '1648881411986030594', NULL, 46, '同意。', NULL, '2022-11-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (886, '1648881411986030594', NULL, 14, NULL, NULL, '2022-11-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (887, '1648881419070210050', NULL, 46, '同意。', NULL, '2022-07-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (888, '1648881419070210050', NULL, 14, NULL, NULL, '2022-07-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (889, '1648881416721399809', NULL, 50, '同意。', NULL, '2021-10-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (890, '1648881416721399809', NULL, 14, NULL, NULL, '2021-10-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (891, '1648881410622133006', NULL, 50, '同意。', NULL, '2021-02-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (892, '1648881410622133006', NULL, 14, NULL, NULL, '2021-02-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (893, '1648881410514703427', NULL, 50, '同意。', NULL, '2021-01-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (894, '1648881410514703427', NULL, 14, NULL, NULL, '2021-01-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (895, '1648881411105226753', NULL, 46, '同意。', NULL, '2023-06-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (896, '1648881411105226753', NULL, 14, NULL, NULL, '2023-07-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (897, '1648881413651169282', NULL, 50, '同意。', NULL, '2022-01-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (898, '1648881413651169282', NULL, 14, NULL, NULL, '2022-01-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (899, '1648881412753588225', NULL, 46, '同意。', NULL, '2022-11-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (900, '1648881412753588225', NULL, 14, NULL, NULL, '2022-11-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (901, '1648881416226471938', NULL, 50, '同意。', NULL, '2022-02-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (902, '1648881416226471938', NULL, 14, NULL, NULL, '2022-02-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (903, '1648881410860814863', NULL, 50, '同意。', NULL, '2021-01-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (904, '1648881410860814863', NULL, 14, NULL, NULL, '2021-01-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (905, '1648881410851279616', NULL, 50, '同意。', NULL, '2020-12-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (906, '1648881410851279616', NULL, 14, NULL, NULL, '2020-12-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (907, '1648881410560078279', NULL, 50, '同意。', NULL, '2021-04-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (908, '1648881410560078279', NULL, 14, NULL, NULL, '2021-04-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (909, '1648881413927993346', NULL, 50, '同意。', NULL, '2022-05-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (910, '1648881413927993346', NULL, 14, NULL, NULL, '2022-05-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (911, '1648881413093326850', NULL, 50, '同意。', NULL, '2022-03-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (912, '1648881413093326850', NULL, 14, NULL, NULL, '2022-03-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (913, '1648881415932870657', NULL, 46, '同意。', NULL, '2022-11-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (914, '1648881415932870657', NULL, 14, NULL, NULL, '2022-11-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (915, '1648881410903259030', NULL, 50, '同意。', NULL, '2020-07-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (916, '1648881410903259030', NULL, 14, NULL, NULL, '2020-07-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (917, '1648881410736064124', NULL, 50, '同意。', NULL, '2020-07-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (918, '1648881410736064124', NULL, 14, NULL, NULL, '2020-07-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (919, '1648881410178734144', NULL, 50, '同意', NULL, '2020-06-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (920, '1648881410178734144', NULL, 14, NULL, NULL, '2020-06-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (921, '1648881410191852464', NULL, 50, '同意。', NULL, '2022-03-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (922, '1648881410191852464', NULL, 14, NULL, NULL, '2022-03-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (923, '1648881410510061219', NULL, 50, '同意。', NULL, '2022-06-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (924, '1648881410510061219', NULL, 14, NULL, NULL, '2022-06-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (925, '1648881410243411447', NULL, 46, '同意。', NULL, '2023-08-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (926, '1648881410243411447', NULL, 14, NULL, NULL, '2023-08-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (927, '1648881410631270406', NULL, 46, '已看，同意。', NULL, '2023-05-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (928, '1648881410631270406', NULL, 14, NULL, NULL, '2023-05-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (929, '1648881410963115554', NULL, 50, '同意', NULL, '2020-08-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (930, '1648881410963115554', NULL, 14, NULL, NULL, '2020-08-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (931, '1648881410609832235', NULL, 46, '同意。', NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (932, '1648881410609832235', NULL, 14, NULL, NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (933, '1648881410877278518', NULL, 46, '同意。', NULL, '2022-10-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (934, '1648881410877278518', NULL, 14, NULL, NULL, '2022-10-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (935, '1648881410571252124', NULL, 50, '同意。', NULL, '2020-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (936, '1648881410571252124', NULL, 14, NULL, NULL, '2020-06-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (937, '1648881410540841551', NULL, 50, '同意。', NULL, '2020-06-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (938, '1648881410540841551', NULL, 14, NULL, NULL, '2020-06-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (939, '1648881410430428516', NULL, 50, '同意', NULL, '2020-08-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (940, '1648881410430428516', NULL, 14, NULL, NULL, '2020-08-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (941, '1648881410200338104', NULL, 50, '同意。', NULL, '2021-10-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (942, '1648881410200338104', NULL, 14, NULL, NULL, '2021-10-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (943, '1648881411457548290', NULL, 46, '同意。', NULL, '2023-05-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (944, '1648881411457548290', NULL, 14, NULL, NULL, '2023-05-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (945, '1648881414511001602', NULL, 50, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (946, '1648881414511001602', NULL, 14, NULL, NULL, '2021-11-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (947, '1648881419162484738', NULL, 50, '同意。', NULL, '2020-08-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (948, '1648881419162484738', NULL, 14, NULL, NULL, '2020-08-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (949, '1648881414775242753', NULL, 46, '同意。', NULL, '2022-08-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (950, '1648881414775242753', NULL, 14, NULL, NULL, '2022-08-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (951, '1648881410631270464', NULL, 46, '同意。', NULL, '2024-05-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (952, '1648881410631270464', NULL, 14, NULL, NULL, '2024-05-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (953, '1648881410980290951', NULL, 50, '同意。', NULL, '2020-06-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (954, '1648881410980290951', NULL, 14, NULL, NULL, '2020-06-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (955, '1648881417769975809', NULL, 50, '同意。', NULL, '2022-01-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (956, '1648881417769975809', NULL, 14, NULL, NULL, '2022-01-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (957, '1648881412476764161', NULL, 46, '同意。', NULL, '2022-08-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (958, '1648881412476764161', NULL, 14, NULL, NULL, '2022-08-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (959, '1648881410820378356', NULL, 50, '同意。', NULL, '2020-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (960, '1648881410820378356', NULL, 14, NULL, NULL, '2020-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (961, '1648881415567966210', NULL, 50, '同意。', NULL, '2021-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (962, '1648881415567966210', NULL, 14, NULL, NULL, '2021-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (963, '1648881413147852802', NULL, 46, '同意。', NULL, '2022-11-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (964, '1648881413147852802', NULL, 14, NULL, NULL, '2022-11-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (965, '1648881410373373665', NULL, 46, '同意。', NULL, '2024-04-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (966, '1648881410373373665', NULL, 14, NULL, NULL, '2024-04-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (967, '1648881412271243265', NULL, 46, '同意。', NULL, '2023-11-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (968, '1648881412271243265', NULL, 14, NULL, NULL, '2023-11-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (969, '1648881410909582214', NULL, 46, '同意。', NULL, '2022-11-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (970, '1648881410909582214', NULL, 14, NULL, NULL, '2022-11-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (971, '1648881410282549870', NULL, 50, '同意。', NULL, '2020-09-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (972, '1648881410282549870', NULL, 14, NULL, NULL, '2020-09-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (973, '1648881415781875714', NULL, 50, '同意。', NULL, '2021-05-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (974, '1648881415781875714', NULL, 14, NULL, NULL, '2021-05-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (975, '1648881411138781190', NULL, 46, '同意。', NULL, '2023-12-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (976, '1648881411138781190', NULL, 14, NULL, NULL, '2023-12-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (977, '1648881410631270428', NULL, 46, '已核。', NULL, '2024-03-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (978, '1648881410631270428', NULL, 14, NULL, NULL, '2024-03-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (979, '1648881410297398475', NULL, 46, '已核。', NULL, '2024-03-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (980, '1648881410297398475', NULL, 14, NULL, NULL, '2024-03-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (981, '1648881410660630529', NULL, 46, '同意。', NULL, '2023-08-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (982, '1648881410660630529', NULL, 14, NULL, NULL, '2023-08-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (983, '1648881411499491369', NULL, 46, '同意。', NULL, '2023-11-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (984, '1648881411499491369', NULL, 14, NULL, NULL, '2023-11-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (985, '1648881413911216130', NULL, 50, '同意。', NULL, '2022-03-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (986, '1648881413911216130', NULL, 14, NULL, NULL, '2022-03-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (987, '1648881411499491376', NULL, 46, '同意。', NULL, '2023-08-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (988, '1648881411499491376', NULL, 14, NULL, NULL, '2023-08-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (989, '1648881410691938675', NULL, 50, '同意。', NULL, '2022-03-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (990, '1648881410691938675', NULL, 14, NULL, NULL, '2022-03-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (991, '1648881415630880769', NULL, 50, '同意。', NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (992, '1648881415630880769', NULL, 14, NULL, NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (993, '1648881414674579458', NULL, 50, '同意。', NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (994, '1648881414674579458', NULL, 14, NULL, NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (995, '1648881410945843202', NULL, 46, '同意。', NULL, '2023-08-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (996, '1648881410945843202', NULL, 14, NULL, NULL, '2023-08-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (997, '1648881410480275457', NULL, 46, '同意。', NULL, '2023-08-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (998, '1648881410480275457', NULL, 14, NULL, NULL, '2023-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (999, '1648881411499491364', NULL, 46, '同意。', NULL, '2023-11-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1000, '1648881411499491364', NULL, 14, NULL, NULL, '2023-11-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1001, '1648881415492468738', NULL, 50, '同意。', NULL, '2021-08-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1002, '1648881415492468738', NULL, 14, NULL, NULL, '2021-08-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1003, '1648881414116737025', NULL, 50, '同意。', NULL, '2021-12-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1004, '1648881414116737025', NULL, 14, NULL, NULL, '2021-12-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1005, '1648881410500921664', NULL, 50, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1006, '1648881410500921664', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1007, '1648881410824162394', NULL, 50, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1008, '1648881410824162394', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1009, '1648881412812308481', NULL, 46, '同意。', NULL, '2023-03-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1010, '1648881412812308481', NULL, 14, NULL, NULL, '2023-03-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1011, '1648881410682247824', NULL, 50, '同意。', NULL, '2020-11-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1012, '1648881410682247824', NULL, 14, NULL, NULL, '2020-11-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1013, '1648881410225456144', NULL, 50, '同意。', NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1014, '1648881410225456144', NULL, 14, NULL, NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1015, '1648881411499491385', NULL, 46, '同意。', NULL, '2023-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1016, '1648881411499491385', NULL, 14, NULL, NULL, '2023-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1017, '1648881411499491330', NULL, 46, '已核。', NULL, '2024-03-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1018, '1648881411499491330', NULL, 14, NULL, NULL, '2024-03-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1019, '1648881410382163554', NULL, 50, '同意。', NULL, '2020-09-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1020, '1648881410382163554', NULL, 14, NULL, NULL, '2020-09-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1021, '1648881412946526209', NULL, 46, '同意。', NULL, '2023-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1022, '1648881412946526209', NULL, 14, NULL, NULL, '2023-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1023, '1648881410984908632', NULL, 50, '同意。', NULL, '2020-04-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1024, '1648881410984908632', NULL, 14, NULL, NULL, '2020-04-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1025, '1648881410984908632', NULL, 7, '同意', NULL, '2020-04-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1026, '1648881410561284288', NULL, 50, '同意。', NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1027, '1648881410561284288', NULL, 14, NULL, NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1028, '1648881410484403626', NULL, 46, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1029, '1648881410484403626', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1030, '1648881410548586173', NULL, 50, '同意。', NULL, '2020-11-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1031, '1648881410548586173', NULL, 14, NULL, NULL, '2020-11-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1032, '1648881410164555946', NULL, 50, '同意。', NULL, '2020-06-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1033, '1648881410164555946', NULL, 14, NULL, NULL, '2020-06-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1034, '1648881410687106800', NULL, 50, '同意。', NULL, '2020-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1035, '1648881410687106800', NULL, 14, NULL, NULL, '2020-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1036, '1648881410554677623', NULL, 50, '同意。', NULL, '2020-04-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1037, '1648881410554677623', NULL, 14, NULL, NULL, '2020-04-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1038, '1648881410942904590', NULL, 50, '同意，回款条件尽量对我方有利。', NULL, '2020-03-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1039, '1648881410942904590', NULL, 14, NULL, NULL, '2020-03-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1040, '1648881410468295383', NULL, 50, '同意。', NULL, '2021-03-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1041, '1648881410468295383', NULL, 14, NULL, NULL, '2021-03-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1042, '1648881414544556034', NULL, 50, '同意。', NULL, '2021-10-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1043, '1648881414544556034', NULL, 14, NULL, NULL, '2021-10-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1044, '1648881411499491386', NULL, 46, '已核。', NULL, '2024-05-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1045, '1648881411499491386', NULL, 14, NULL, NULL, '2024-05-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1046, '1648881410131517581', NULL, 50, '同意。', NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1047, '1648881410131517581', NULL, 14, NULL, NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1048, '1648881410704986343', NULL, 50, '同意。', NULL, '2020-04-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1049, '1648881410704986343', NULL, 14, NULL, NULL, '2020-05-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1050, '1648881410552881088', NULL, 50, '同意。', NULL, '2021-01-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1051, '1648881410552881088', NULL, 14, NULL, NULL, '2021-01-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1052, '1648881410962620417', NULL, 46, '同意。', NULL, '2023-07-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1053, '1648881410962620417', NULL, 14, NULL, NULL, '2023-07-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1054, '1648881414234177537', NULL, 46, '同意。', NULL, '2022-12-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1055, '1648881414234177537', NULL, 14, NULL, NULL, '2022-12-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1056, '1648881410160490777', NULL, 50, '同意。', NULL, '2020-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1057, '1648881410160490777', NULL, 14, NULL, NULL, '2020-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1058, '1648881411499491373', NULL, 46, '同意。', NULL, '2023-10-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1059, '1648881411499491373', NULL, 14, NULL, NULL, '2023-10-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1060, '1648881415362445314', NULL, 50, '同意。', NULL, '2021-02-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1061, '1648881415362445314', NULL, 14, NULL, NULL, '2021-02-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1062, '1648881413361762305', NULL, 46, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1063, '1648881413361762305', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1064, '1648881410473847805', NULL, 46, '同意。', NULL, '2023-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1065, '1648881410473847805', NULL, 14, NULL, NULL, '2023-01-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1066, '1648881410107254972', NULL, 46, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1067, '1648881410107254972', NULL, 14, NULL, NULL, '2023-02-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1068, '1648881415349862402', NULL, 50, '同意。', NULL, '2020-11-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1069, '1648881415349862402', NULL, 14, NULL, NULL, '2020-11-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1070, '1648881417367322626', NULL, 50, '同意。', NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1071, '1648881417367322626', NULL, 14, NULL, NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1072, '1648881410798238379', NULL, 50, '同意。', NULL, '2020-11-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1073, '1648881410798238379', NULL, 14, NULL, NULL, '2020-11-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1074, '1648881413512757249', NULL, 46, NULL, NULL, '2022-08-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1075, '1648881413512757249', NULL, 14, NULL, NULL, '2022-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1076, '1648881411159752705', NULL, 46, '同意。', NULL, '2023-05-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1077, '1648881411159752705', NULL, 14, NULL, NULL, '2023-05-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1078, '1648881416163557378', NULL, 50, '现行规定中一些标准年号未写。其它无异议', NULL, '2022-05-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1079, '1648881416163557378', NULL, 14, NULL, NULL, '2022-05-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1080, '1648881411944087553', NULL, 46, '同意。', NULL, '2023-02-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1081, '1648881411944087553', NULL, 14, NULL, NULL, '2023-02-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1082, '1648881415962230785', NULL, 50, '同意。', NULL, '2021-06-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1083, '1648881415962230785', NULL, 14, NULL, NULL, '2021-06-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1084, '1648881412631953410', NULL, 46, '同意。', NULL, '2022-10-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1085, '1648881412631953410', NULL, 14, NULL, NULL, '2022-10-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1086, '1648881410790653953', NULL, 46, '同意。', NULL, '2023-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1087, '1648881410790653953', NULL, 14, NULL, NULL, '2023-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1088, '1648881410934959316', NULL, 46, '已核。', NULL, '2024-04-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1089, '1648881410934959316', NULL, 14, NULL, NULL, '2024-04-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1090, '1648881415240810497', NULL, 50, '同意。', NULL, '2021-10-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1091, '1648881415240810497', NULL, 14, NULL, NULL, '2021-10-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1092, '1648881410461347563', NULL, 46, '同意。购买的地形图（地形地类图）已与甲方沟通好了。', NULL, '2024-05-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1093, '1648881410461347563', NULL, 14, NULL, NULL, '2024-05-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1094, '1648881410815819777', NULL, 46, '同意。', NULL, '2023-04-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1095, '1648881410815819777', NULL, 14, NULL, NULL, '2023-04-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1096, '1648881410668416776', NULL, 46, '同意。', NULL, '2023-05-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1097, '1648881410668416776', NULL, 14, NULL, NULL, '2023-07-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1098, '1648881418524950530', NULL, 50, '同意。', NULL, '2020-09-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1099, '1648881418524950530', NULL, 14, NULL, NULL, '2020-09-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1100, '1648881414527778817', NULL, 50, '实际完成的工作量有变化，拟同意。', NULL, '2021-11-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1101, '1648881414527778817', NULL, 14, NULL, NULL, '2021-11-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1102, '1648881415412776962', NULL, 50, '同意。', NULL, '2021-08-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1103, '1648881415412776962', NULL, 14, NULL, NULL, '2021-08-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1104, '1648881410134677458', NULL, 50, '同意。', NULL, '2020-10-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1105, '1648881410134677458', NULL, 14, NULL, NULL, '2020-10-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1106, '1648881410717329443', NULL, 50, '同意。', NULL, '2020-07-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1107, '1648881410717329443', NULL, 14, NULL, NULL, '2020-07-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1108, '1648881410704801796', NULL, 50, '同意。', NULL, '2020-10-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1109, '1648881410704801796', NULL, 14, NULL, NULL, '2020-10-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1110, '1648881410354070864', NULL, 50, '同意。', NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1111, '1648881410354070864', NULL, 14, NULL, NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1112, '1648881415026900993', NULL, 50, '同意。', NULL, '2021-08-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1113, '1648881415026900993', NULL, 14, NULL, NULL, '2021-08-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1114, '1648881410414675394', NULL, 50, '同意。', NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1115, '1648881410414675394', NULL, 14, NULL, NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1116, '1648881410883917489', NULL, 46, '同意。', NULL, '2024-05-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1117, '1648881410883917489', NULL, 14, NULL, NULL, '2024-05-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1118, '1648881410144669780', NULL, 50, '同意。', NULL, '2020-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1119, '1648881410144669780', NULL, 14, NULL, NULL, '2020-08-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1120, '1648881410270491484', NULL, 50, '同意。按附件修改', NULL, '2020-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1121, '1648881410270491484', NULL, 14, '同意', NULL, '2020-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1122, '1648881410639574064', NULL, 50, '同意。', NULL, '2021-05-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1123, '1648881410639574064', NULL, 14, NULL, NULL, '2021-05-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1124, '1648881410570164873', NULL, 50, '同意。', NULL, '2021-05-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1125, '1648881410570164873', NULL, 14, NULL, NULL, '2021-05-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1126, '1648881410442959061', NULL, 46, '同意。', NULL, '2023-05-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1127, '1648881410442959061', NULL, 14, NULL, NULL, '2023-05-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1128, '1648881410497398215', NULL, 50, '同意。', NULL, '2020-06-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1129, '1648881410497398215', NULL, 14, NULL, NULL, '2020-06-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1130, '1648881411252027394', NULL, 46, '同意。', NULL, '2023-05-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1131, '1648881411252027394', NULL, 14, NULL, NULL, '2023-05-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1132, '1648881410568803046', NULL, 50, '同意。', NULL, '2022-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1133, '1648881410568803046', NULL, 14, NULL, NULL, '2022-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1134, '1648881410270855494', NULL, 50, '同意。', NULL, '2022-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1135, '1648881410270855494', NULL, 14, NULL, NULL, '2022-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1136, '1648881410118749805', NULL, 50, '同意。', NULL, '2020-06-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1137, '1648881410118749805', NULL, 14, NULL, NULL, '2020-06-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1138, '1648881410189150812', NULL, 50, '同意.', NULL, '2020-07-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1139, '1648881410189150812', NULL, 14, NULL, NULL, '2020-07-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1140, '1648881411788898306', NULL, 50, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1141, '1648881411788898306', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1142, '1648881410115357569', NULL, 50, '同意。', NULL, '2020-07-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1143, '1648881410115357569', NULL, 14, NULL, NULL, '2020-07-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1144, '1648881410641620227', NULL, 50, '同意。', NULL, '2020-07-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1145, '1648881410641620227', NULL, 14, NULL, NULL, '2020-07-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1146, '1648881410471261557', NULL, 50, '同意。', NULL, '2020-04-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1147, '1648881410471261557', NULL, 14, NULL, NULL, '2020-04-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1148, '1648881413877661698', NULL, 50, '同意。', NULL, '2022-05-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1149, '1648881413877661698', NULL, 14, NULL, NULL, '2022-05-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1150, '1648881410826406641', NULL, 46, '同意。', NULL, '2023-01-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1151, '1648881410826406641', NULL, 14, NULL, NULL, '2023-01-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1152, '1648881410717990743', NULL, 50, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1153, '1648881410717990743', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1154, '1648881412594204674', NULL, 46, '同意。', NULL, '2023-08-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1155, '1648881412594204674', NULL, 14, NULL, NULL, '2023-08-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1156, '1648881418290069506', NULL, 50, '同意。', NULL, '2022-01-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1157, '1648881418290069506', NULL, 14, NULL, NULL, '2022-01-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1158, '1648881410125467945', NULL, 50, '同意。', NULL, '2021-08-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1159, '1648881410125467945', NULL, 14, NULL, NULL, '2021-08-24 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1160, '1648881413894438914', NULL, 46, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1161, '1648881413894438914', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1162, '1648881410759619061', NULL, 46, '同意。', NULL, '2023-05-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1163, '1648881410759619061', NULL, 14, NULL, NULL, '2023-05-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1164, '1648881410296639104', NULL, 50, '同意。', NULL, '2021-05-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1165, '1648881410296639104', NULL, 14, NULL, NULL, '2021-05-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1166, '1648881412057333761', NULL, 46, '同意。', NULL, '2022-10-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1167, '1648881412057333761', NULL, 14, NULL, NULL, '2022-10-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1168, '1648881410929065985', NULL, 46, '同意。', NULL, '2023-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1169, '1648881410929065985', NULL, 14, NULL, NULL, '2023-08-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1170, '1648881411587571714', NULL, 46, '同意。', NULL, '2023-04-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1171, '1648881411587571714', NULL, 14, NULL, NULL, '2023-04-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1172, '1648881410776521153', NULL, 46, '同意。', NULL, '2022-12-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1173, '1648881410776521153', NULL, 14, NULL, NULL, '2022-12-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1174, '1648881412204134402', NULL, 46, '同意。', NULL, '2023-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1175, '1648881412204134402', NULL, 14, NULL, NULL, '2023-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1176, '1648881410912288769', NULL, 46, '同意。', NULL, '2023-08-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1177, '1648881410912288769', NULL, 14, NULL, NULL, '2023-08-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1178, '1648881410697335060', NULL, 50, '同意。', NULL, '2020-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1179, '1648881410697335060', NULL, 14, NULL, NULL, '2020-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1180, '1648881410861985600', NULL, 46, '同意。', NULL, '2023-07-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1181, '1648881410861985600', NULL, 14, NULL, NULL, '2023-07-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1182, '1648881410822597241', NULL, 50, '同意。', NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1183, '1648881410822597241', NULL, 14, NULL, NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1184, '1648881410997496056', NULL, 50, '同意。', NULL, '2020-04-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1185, '1648881410997496056', NULL, 14, NULL, NULL, '2020-04-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1186, '1648881410979397634', NULL, 46, '同意。', NULL, '2023-02-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1187, '1648881410979397634', NULL, 14, NULL, NULL, '2023-02-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1188, '1648881410942099989', NULL, 50, '同意。', NULL, '2021-03-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1189, '1648881410942099989', NULL, 14, NULL, NULL, '2021-03-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1190, '1648881410975262974', NULL, 50, '同意。', NULL, '2021-11-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1191, '1648881410975262974', NULL, 14, NULL, NULL, '2021-11-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1192, '1648881410354038149', NULL, 46, '已核。', NULL, '2023-10-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1193, '1648881410354038149', NULL, 14, NULL, NULL, '2023-10-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1194, '1648881413395316737', NULL, 50, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1195, '1648881413395316737', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1196, '1648881410990960316', NULL, 46, '同意。', NULL, '2022-08-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1197, '1648881410990960316', NULL, 14, NULL, NULL, '2022-08-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1198, '1648881410578684211', NULL, 46, '同意。', NULL, '2022-08-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1199, '1648881410578684211', NULL, 14, NULL, NULL, '2022-08-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1200, '1648881410997134774', NULL, 50, '同意。', NULL, '2020-12-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1201, '1648881410997134774', NULL, 14, NULL, NULL, '2021-03-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1202, '1648881410914560063', NULL, 46, '同意。', NULL, '2023-03-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1203, '1648881410914560063', NULL, 14, NULL, NULL, '2023-03-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1204, '1648881410910076058', NULL, 50, '同意。', NULL, '2022-04-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1205, '1648881410910076058', NULL, 14, NULL, NULL, '2022-04-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1206, '1648881410375591598', NULL, 50, '同意。', NULL, '2020-12-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1207, '1648881410375591598', NULL, 14, NULL, NULL, '2021-03-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1208, '1648881410227794174', NULL, 46, '同意。', NULL, '2023-06-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1209, '1648881410227794174', NULL, 14, NULL, NULL, '2023-05-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1210, '1648881410357926147', NULL, 50, '同意。', NULL, '2020-10-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1211, '1648881410357926147', NULL, 14, NULL, NULL, '2020-10-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1212, '1648881410366968717', NULL, 46, '同意。', NULL, '2022-08-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1213, '1648881410366968717', NULL, 14, NULL, NULL, '2022-08-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1214, '1648881410614180504', NULL, 50, '同意。', NULL, '2020-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1215, '1648881410614180504', NULL, 14, NULL, NULL, '2020-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1216, '1648881410230989354', NULL, 46, '同意。', NULL, '2023-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1217, '1648881410230989354', NULL, 14, NULL, NULL, '2023-07-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1218, '1648881410631270441', NULL, 46, '已核。', NULL, '2024-04-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1219, '1648881410631270441', NULL, 14, NULL, NULL, '2024-04-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1220, '1648881410694184962', NULL, 46, '同意。', NULL, '2023-08-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1221, '1648881410694184962', NULL, 14, NULL, NULL, '2023-08-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1222, '1648881410839617904', NULL, 46, '同意。', NULL, '2023-05-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1223, '1648881410839617904', NULL, 14, NULL, NULL, '2023-05-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1224, '1648881411218472961', NULL, 46, '同意。', NULL, '2023-05-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1225, '1648881411218472961', NULL, 14, NULL, NULL, '2023-05-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1226, '1648881412296409090', NULL, 46, '同意。', NULL, '2022-11-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1227, '1648881412296409090', NULL, 14, NULL, NULL, '2022-11-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1228, '1648881410752886583', NULL, 46, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1229, '1648881410752886583', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1230, '1648881412875223041', NULL, 46, '同意。', NULL, '2023-02-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1231, '1648881412875223041', NULL, 14, NULL, NULL, '2023-02-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1232, '1648881410782571556', NULL, 46, '同意。', NULL, '2023-07-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1233, '1648881410782571556', NULL, 14, NULL, NULL, '2023-07-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1234, '1648881410887197715', NULL, 50, '同意。', NULL, '2021-04-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1235, '1648881410887197715', NULL, 14, NULL, NULL, '2021-04-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1236, '1648881410879477066', NULL, 50, '同意。', NULL, '2020-04-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1237, '1648881410879477066', NULL, 14, NULL, NULL, '2020-04-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1238, '1648881410788654845', NULL, 46, '同意。', NULL, '2022-10-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1239, '1648881410788654845', NULL, 14, NULL, NULL, '2022-10-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1240, '1648881413227544578', NULL, 50, '国家2000大地坐标系应为2000国家大地坐标系。其它无异议', NULL, '2022-05-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1241, '1648881413227544578', NULL, 14, NULL, NULL, '2022-05-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1242, '1648881410840613277', NULL, 50, '同意。', NULL, '2020-06-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1243, '1648881410840613277', NULL, 14, NULL, NULL, '2020-06-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1244, '1648881410335448898', NULL, 46, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1245, '1648881410335448898', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1246, '1648881410121267356', NULL, 50, '同意。', NULL, '2022-03-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1247, '1648881410121267356', NULL, 14, NULL, NULL, '2022-03-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1248, '1648881418642391041', NULL, 50, '同意。', NULL, '2020-04-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1249, '1648881418642391041', NULL, 14, NULL, NULL, '2020-04-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1250, '1648881412124442625', NULL, 46, '同意。', NULL, '2023-07-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1251, '1648881412124442625', NULL, 14, NULL, NULL, '2023-07-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1252, '1648881410289032772', NULL, 50, '同意。', NULL, '2020-10-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1253, '1648881410289032772', NULL, 14, NULL, NULL, '2020-10-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1254, '1648881418256515073', NULL, 50, '同意。', NULL, '2020-11-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1255, '1648881418256515073', NULL, 14, NULL, NULL, '2020-11-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1256, '1648881411499491351', NULL, 46, '同意。', NULL, '2023-12-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1257, '1648881411499491351', NULL, 14, NULL, NULL, '2023-12-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1258, '1648881410631270433', NULL, 46, '同意。', NULL, '2024-05-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1259, '1648881410631270433', NULL, 14, NULL, NULL, '2024-05-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1260, '1648881410507534625', NULL, 46, '同意。', NULL, '2023-02-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1261, '1648881410507534625', NULL, 14, NULL, NULL, '2023-02-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1262, '1648881415861567490', NULL, 50, '同意。', NULL, '2022-03-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1263, '1648881415861567490', NULL, 14, NULL, NULL, '2022-03-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1264, '1648881418327818241', NULL, 50, '同意。', NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1265, '1648881418327818241', NULL, 14, NULL, NULL, '2020-12-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1266, '1648881410542685455', NULL, 46, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1267, '1648881410542685455', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1268, '1648881410649460614', NULL, 46, '同意。', NULL, '2023-09-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1269, '1648881410649460614', NULL, 14, NULL, NULL, '2023-09-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1270, '1648881410866642195', NULL, 46, '同意。', NULL, '2024-06-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1271, '1648881410866642195', NULL, 14, NULL, NULL, '2024-06-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1272, '1648881411788898307', NULL, 50, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1273, '1648881411788898307', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1274, '1648881410643459009', NULL, 50, '同意。', NULL, '2021-06-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1275, '1648881410643459009', NULL, 14, NULL, NULL, '2021-06-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1276, '1648881411499491345', NULL, 46, '同意。', NULL, '2023-12-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1277, '1648881411499491345', NULL, 14, NULL, NULL, '2023-12-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1278, '1648881410631270402', NULL, 46, '同意。', NULL, '2023-04-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1279, '1648881410631270402', NULL, 14, NULL, NULL, '2023-04-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1280, '1648881411499491381', NULL, 46, '同意。', NULL, '2023-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1281, '1648881411499491381', NULL, 14, NULL, NULL, '2023-07-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1282, '1648881410537398469', NULL, 46, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1283, '1648881410537398469', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1284, '1648881411499491344', NULL, 46, '同意。', NULL, '2023-12-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1285, '1648881411499491344', NULL, 14, NULL, NULL, '2023-12-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1286, '1648881414276120578', NULL, 46, '同意。', NULL, '2023-03-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1287, '1648881414276120578', NULL, 14, NULL, NULL, '2023-03-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1288, '1648881413244321794', NULL, 46, '同意。', NULL, '2023-02-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1289, '1648881413244321794', NULL, 14, NULL, NULL, '2023-02-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1290, '1648881411847618561', NULL, 46, '同意。', NULL, '2023-08-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1291, '1648881411847618561', NULL, 14, NULL, NULL, '2023-08-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1292, '1648881415047872514', NULL, 46, '同意。', NULL, '2023-03-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1293, '1648881415047872514', NULL, 14, NULL, NULL, '2023-03-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1294, '1648881414259343361', NULL, 46, '同意。', NULL, '2023-03-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1295, '1648881414259343361', NULL, 14, NULL, NULL, '2023-03-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1296, '1648881414880100353', NULL, 50, '同意。', NULL, '2021-11-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1297, '1648881414880100353', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1298, '1648881414292897793', NULL, 46, '同意。', NULL, '2023-03-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1299, '1648881414292897793', NULL, 14, NULL, NULL, '2023-03-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1300, '1648881410692363818', NULL, 50, '同意。', NULL, '2019-12-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1301, '1648881410692363818', NULL, 14, NULL, NULL, '2020-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1302, '1648881415265976322', NULL, 46, '同意。', NULL, '2023-03-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1303, '1648881415265976322', NULL, 14, NULL, NULL, '2023-03-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1304, '1648881416243249154', NULL, 50, '同意。', NULL, '2021-04-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1305, '1648881416243249154', NULL, 14, NULL, NULL, '2021-04-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1306, '1648881414192234498', NULL, 46, '同意。', NULL, '2023-03-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1307, '1648881414192234498', NULL, 14, NULL, NULL, '2023-03-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1308, '1648881410241016160', NULL, 50, '同意。', NULL, '2022-06-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1309, '1648881410241016160', NULL, 14, NULL, NULL, '2022-07-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1310, '1648881410631270459', NULL, 50, '同意。', NULL, '2021-03-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1311, '1648881410631270459', NULL, 14, NULL, NULL, '2021-03-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1312, '1648881410534333954', NULL, 50, '同意。', NULL, '2020-12-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1313, '1648881410534333954', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1314, '1648881410674477562', NULL, 50, '同意。', NULL, '2021-05-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1315, '1648881410674477562', NULL, 14, NULL, NULL, '2021-05-12 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1316, '1648881410125372801', NULL, 50, '同意。', NULL, '2021-09-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1317, '1648881410125372801', NULL, 14, NULL, NULL, '2021-09-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1318, '1648881410498151517', NULL, 46, '同意。', NULL, '2023-09-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1319, '1648881410498151517', NULL, 14, NULL, NULL, '2023-09-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1320, '1648881410768077938', NULL, 46, '同意。', NULL, '2023-09-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1321, '1648881410768077938', NULL, 14, NULL, NULL, '2023-09-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1322, '1648881412774559745', NULL, 46, '同意。', NULL, '2022-12-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1323, '1648881412774559745', NULL, 14, NULL, NULL, '2022-12-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1324, '1648881410970356648', NULL, 50, '同意。', NULL, '2020-07-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1325, '1648881410970356648', NULL, 14, NULL, NULL, '2020-07-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1326, '1648881417564454914', NULL, 50, '同意。', NULL, '2022-01-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1327, '1648881417564454914', NULL, 14, NULL, NULL, '2022-01-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1328, '1648881414355812353', NULL, 46, '同意。', NULL, '2023-07-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1329, '1648881414355812353', NULL, 14, NULL, NULL, '2023-07-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1330, '1648881410683729479', NULL, 50, '同意。', NULL, '2021-01-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1331, '1648881410683729479', NULL, 14, NULL, NULL, '2021-03-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1332, '1648881410691482684', NULL, 50, '同意。', NULL, '2020-05-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1333, '1648881410691482684', NULL, 14, NULL, NULL, '2020-05-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1334, '1648881421276413954', NULL, 50, '同意。', NULL, '2021-02-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1335, '1648881421276413954', NULL, 14, NULL, NULL, '2021-02-02 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1336, '1648881416520073217', NULL, 50, '同意。', NULL, '2021-01-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1337, '1648881416520073217', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1338, '1648881414066405378', NULL, 50, '同意。', NULL, '2021-08-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1339, '1648881414066405378', NULL, 14, NULL, NULL, '2021-08-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1340, '1648881417795141633', NULL, 50, '同意。', NULL, '2021-12-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1341, '1648881417795141633', NULL, 14, NULL, NULL, '2021-12-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1342, '1648881418923409409', NULL, 50, '同意。', NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1343, '1648881418923409409', NULL, 14, NULL, NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1344, '1648881418910826498', NULL, 50, '同意。', NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1345, '1648881418910826498', NULL, 14, NULL, NULL, '2022-01-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1346, '1648881418894049281', NULL, 50, '同意。', NULL, '2021-07-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1347, '1648881418894049281', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1348, '1648881410929631852', NULL, 46, '同意。', NULL, '2022-12-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1349, '1648881410929631852', NULL, 14, NULL, NULL, '2022-12-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1350, '1648881410291107304', NULL, 50, '同意。', NULL, '2021-06-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1351, '1648881410291107304', NULL, 14, NULL, NULL, '2021-06-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1352, '1648881410312850944', NULL, 46, '同意。', NULL, '2024-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1353, '1648881410312850944', NULL, 14, NULL, NULL, '2024-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1354, '1648881410183642225', NULL, 50, '同意。', NULL, '2020-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1355, '1648881410183642225', NULL, 14, NULL, NULL, '2020-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1356, '1648881416327135233', NULL, 50, '同意。', NULL, '2021-08-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1357, '1648881416327135233', NULL, 14, NULL, NULL, '2021-06-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1358, '1648881410631270419', NULL, 46, '同意。', NULL, '2023-11-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1359, '1648881410631270419', NULL, 14, NULL, NULL, '2023-11-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1360, '1648881410823903865', NULL, 50, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1361, '1648881410823903865', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1362, '1648881413265293314', NULL, 46, '同意。', NULL, '2023-02-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1363, '1648881413265293314', NULL, 14, NULL, NULL, '2023-02-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1364, '1648881410239584326', NULL, 50, '同意。', NULL, '2020-06-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1365, '1648881410239584326', NULL, 14, NULL, NULL, '2020-06-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1366, '1648881418411704322', NULL, 50, '同意。', NULL, '2020-07-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1367, '1648881418411704322', NULL, 14, NULL, NULL, '2020-07-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1368, '1648881410348435466', NULL, 50, '同意。', NULL, '2021-09-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1369, '1648881410348435466', NULL, 14, NULL, NULL, '2021-09-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1370, '1648881410262720843', NULL, 50, '同意。', NULL, '2020-09-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1371, '1648881410262720843', NULL, 14, NULL, NULL, '2020-09-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1372, '1648881418034216962', NULL, 50, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1373, '1648881418034216962', NULL, 14, NULL, NULL, '2020-09-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1374, '1648881416536850434', NULL, 50, '同意。', NULL, '2021-06-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1375, '1648881416536850434', NULL, 14, NULL, NULL, '2021-06-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1376, '1648881415001735169', NULL, 50, '同意。', NULL, '2022-04-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1377, '1648881415001735169', NULL, 14, NULL, NULL, '2022-04-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1378, '1648881413751832578', NULL, 46, '同意。', NULL, '2022-12-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1379, '1648881413751832578', NULL, 14, NULL, NULL, '2021-12-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1380, '1648881410971979181', NULL, 50, '同意。', NULL, '2021-05-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1381, '1648881410971979181', NULL, 14, NULL, NULL, '2021-05-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1382, '1648881410556314675', NULL, 50, '同意。', NULL, '2020-11-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1383, '1648881410556314675', NULL, 14, NULL, NULL, '2020-11-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1384, '1648881411499491348', NULL, 46, '已核。', NULL, '2024-01-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1385, '1648881411499491348', NULL, 14, NULL, NULL, '2024-01-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1386, '1648881410989418161', NULL, 50, '《城市测量规范》、《工程测量规范》均已过期。', NULL, '2021-12-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1387, '1648881410989418161', NULL, 14, NULL, NULL, '2021-12-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1388, '1648881410780227510', NULL, 46, '已核。', NULL, '2024-03-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1389, '1648881410780227510', NULL, 14, NULL, NULL, '2024-03-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1390, '1648881410944784475', NULL, 46, '已核。', NULL, '2024-03-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1391, '1648881410944784475', NULL, 14, NULL, NULL, '2024-03-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1392, '1648881410948033623', NULL, 50, '同意。', NULL, '2022-05-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1393, '1648881410948033623', NULL, 14, NULL, NULL, '2022-05-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1394, '1648881410906269866', NULL, 50, '同意。', NULL, '2020-09-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1395, '1648881410906269866', NULL, 14, NULL, NULL, '2020-09-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1396, '1648881413462425602', NULL, 50, '同意。', NULL, '2020-08-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1397, '1648881413462425602', NULL, 14, NULL, NULL, '2020-08-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1398, '1648881410862884037', NULL, 50, '同意。', NULL, '2020-08-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1399, '1648881410862884037', NULL, 14, NULL, NULL, '2020-08-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1400, '1648881411499491336', NULL, 46, '同意。', NULL, '2023-12-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1401, '1648881411499491336', NULL, 14, NULL, NULL, '2023-12-29 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1402, '1648881411499491363', NULL, 46, '同意。', NULL, '2023-10-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1403, '1648881411499491363', NULL, 14, NULL, NULL, '2023-10-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1404, '1648881410358610942', NULL, 50, '同意。', NULL, '2020-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1405, '1648881410358610942', NULL, 14, NULL, NULL, '2020-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1406, '1648881410565090039', NULL, 50, '同意。', NULL, '2022-05-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1407, '1648881410565090039', NULL, 14, NULL, NULL, '2022-05-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1408, '1648881411927310338', NULL, 46, '同意。', NULL, '2023-02-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1409, '1648881411927310338', NULL, 14, NULL, NULL, '2023-02-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1410, '1648881413412093953', NULL, 50, '同意。', NULL, '2022-06-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1411, '1648881413412093953', NULL, 14, NULL, NULL, '2022-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1412, '1648881410744516610', NULL, 46, '同意。', NULL, '2023-10-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1413, '1648881410744516610', NULL, 14, NULL, NULL, '2023-10-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1414, '1648881410738961210', NULL, 46, '同意。', NULL, '2023-12-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1415, '1648881410738961210', NULL, 14, NULL, NULL, '2023-12-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1416, '1648881410878734337', NULL, 46, '同意。', NULL, '2023-08-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1417, '1648881410878734337', NULL, 14, NULL, NULL, '2023-08-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1418, '1648881413164630018', NULL, 46, '同意。', NULL, '2023-07-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1419, '1648881413164630018', NULL, 14, NULL, NULL, '2023-07-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1420, '1648881410972336941', NULL, 50, '同意。', NULL, '2020-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1421, '1648881410972336941', NULL, 14, NULL, NULL, '2020-10-21 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1422, '1648881416620736513', NULL, 50, '同意。', NULL, '2020-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1423, '1648881416620736513', NULL, 14, NULL, NULL, '2020-09-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1424, '1648881411499491355', NULL, 46, '同意。', NULL, '2023-12-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1425, '1648881411499491355', NULL, 14, NULL, NULL, '2023-12-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1426, '1648881411499491350', NULL, 46, '同意。', NULL, '2024-02-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1427, '1648881411499491350', NULL, 14, NULL, NULL, '2024-01-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1428, '1648881415429554178', NULL, 50, '同意。', NULL, '2022-03-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1429, '1648881415429554178', NULL, 14, NULL, NULL, '2022-03-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1430, '1648881410960592700', NULL, 46, '同意。', NULL, '2024-05-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1431, '1648881410960592700', NULL, 14, NULL, NULL, '2024-05-31 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1432, '1648881411331719170', NULL, 50, '同意。', NULL, '2021-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1433, '1648881411331719170', NULL, 14, NULL, NULL, '2021-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1434, '1648881416578793474', NULL, 50, '同意。', NULL, '2020-12-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1435, '1648881416578793474', NULL, 14, NULL, NULL, '2020-12-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1436, '1648881413860884481', NULL, 50, '同意。', NULL, '2021-11-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1437, '1648881413860884481', NULL, 14, NULL, NULL, '2021-11-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1438, '1648881417006612482', NULL, 50, '同意。', NULL, '2021-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1439, '1648881417006612482', NULL, 14, NULL, NULL, '2021-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1440, '1648881412422238210', NULL, 50, '同意。', NULL, '2022-04-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1441, '1648881412422238210', NULL, 14, NULL, NULL, '2022-04-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1442, '1648881415446331394', NULL, 50, '同意。', NULL, '2021-07-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1443, '1648881415446331394', NULL, 14, NULL, NULL, '2021-07-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1444, '1648881413483397121', NULL, 50, '同意。', NULL, '2022-05-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1445, '1648881413483397121', NULL, 14, NULL, NULL, '2022-05-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1446, '1648881412573233153', NULL, 46, '同意。', NULL, '2022-10-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1447, '1648881412573233153', NULL, 14, NULL, NULL, '2022-10-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1448, '1648881411067478017', NULL, 46, '同意。', NULL, '2023-05-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1449, '1648881411067478017', NULL, 14, NULL, NULL, '2023-05-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1450, '1648881410921280755', NULL, 50, '同意。', NULL, '2021-01-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1451, '1648881410921280755', NULL, 14, NULL, NULL, '2021-01-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1452, '1648881410892891237', NULL, 50, '同意。', NULL, '2021-06-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1453, '1648881410892891237', NULL, 14, NULL, NULL, '2021-06-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1454, '1648881415375028225', NULL, 46, NULL, NULL, '2022-07-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1455, '1648881415375028225', NULL, 14, NULL, NULL, '2022-07-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1456, '1648881410631270454', NULL, 50, '同意。', NULL, '2021-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1457, '1648881410631270454', NULL, 14, NULL, NULL, '2021-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1458, '1648881410970475344', NULL, 50, '同意。', NULL, '2021-06-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1459, '1648881410970475344', NULL, 14, NULL, NULL, '2021-06-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1460, '1648881410631270418', NULL, 46, '同意。', NULL, '2023-09-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1461, '1648881410631270418', NULL, 14, NULL, NULL, '2023-09-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1462, '1648881411373662209', NULL, 50, '同意。', NULL, '2021-10-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1463, '1648881411373662209', NULL, 14, NULL, NULL, '2021-10-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1464, '1648881410559741274', NULL, 50, '同意。', NULL, '2021-01-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1465, '1648881410559741274', NULL, 14, NULL, NULL, '2021-01-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1466, '1648881416792702977', NULL, 50, '同意。', NULL, '2021-01-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1467, '1648881416792702977', NULL, 14, NULL, NULL, '2021-01-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1468, '1648881410330549313', NULL, 50, '同意。', NULL, '2021-06-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1469, '1648881410330549313', NULL, 14, NULL, NULL, '2021-06-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1470, '1648881415286947841', NULL, 50, '同意。', NULL, '2021-11-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1471, '1648881415286947841', NULL, 14, NULL, NULL, '2021-11-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1472, '1648881415798652929', NULL, 50, '同意。', NULL, '2021-11-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1473, '1648881415798652929', NULL, 14, NULL, NULL, '2021-11-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1474, '1648881416343912449', NULL, 50, '同意。', NULL, '2021-07-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1475, '1648881416343912449', NULL, 14, NULL, NULL, '2021-07-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1476, '1658881414813722843', NULL, 46, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1477, '1658881414813722843', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1478, '1648881410944366976', NULL, 46, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1479, '1648881410944366976', NULL, 14, NULL, NULL, NULL);
INSERT INTO `cmc_contract_comment` VALUES (1480, '1648881411499491382', NULL, 46, '同意。', NULL, '2023-10-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1481, '1648881411499491382', NULL, 14, NULL, NULL, '2023-10-10 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1482, '1648881410233908946', NULL, 46, '同意。', NULL, '2023-11-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1483, '1648881410233908946', NULL, 14, NULL, NULL, '2023-11-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1484, '1648881410137848937', NULL, 46, '同意。', NULL, '2023-06-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1485, '1648881410137848937', NULL, 14, NULL, NULL, '2023-06-06 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1486, '1648881418340401153', NULL, 50, '同意。', NULL, '2020-09-14 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1487, '1648881418340401153', NULL, 14, NULL, NULL, '2020-09-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1488, '1648881410441185548', NULL, 50, '同意。', NULL, '2020-08-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1489, '1648881410441185548', NULL, 14, NULL, NULL, '2020-08-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1490, '1648881410832596993', NULL, 46, '同意。', NULL, '2023-10-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1491, '1648881410832596993', NULL, 14, NULL, NULL, '2023-10-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1492, '1648881411499491361', NULL, 46, '同意。', NULL, '2023-11-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1493, '1648881411499491361', NULL, 14, NULL, NULL, '2023-11-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1494, '1648881410331459017', NULL, 46, '已核。', NULL, '2024-03-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1495, '1648881410331459017', NULL, 14, NULL, NULL, '2024-03-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1496, '1648881410970220958', NULL, 46, '同意。', NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1497, '1648881410970220958', NULL, 14, NULL, NULL, '2023-06-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1498, '1648881410251834900', NULL, 46, '同意。', NULL, '2023-07-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1499, '1648881410251834900', NULL, 14, NULL, NULL, '2023-07-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1500, '1648881410222755173', NULL, 46, '已核。', NULL, '2024-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1501, '1648881410222755173', NULL, 14, NULL, NULL, '2024-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1502, '1648881412040556545', NULL, 46, '同意。', NULL, '2022-10-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1503, '1648881412040556545', NULL, 14, NULL, NULL, '2022-10-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1504, '1648881410768387087', NULL, 46, '已核。', NULL, '2023-12-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1505, '1648881410768387087', NULL, 14, NULL, NULL, '2023-12-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1506, '1648881411826647041', NULL, 46, '提交成果包含原始测量数据，看是否商量取消或部分。', NULL, '2023-05-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1507, '1648881411826647041', NULL, 14, NULL, NULL, '2023-05-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1508, '1648881411499491347', NULL, 46, '同意。', NULL, '2023-12-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1509, '1648881411499491347', NULL, 14, NULL, NULL, '2023-12-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1510, '1648881410695968877', NULL, 50, '同意。', NULL, '2021-11-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1511, '1648881410695968877', NULL, 14, NULL, NULL, '2021-11-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1512, '1648881414389366785', NULL, 50, '同意。', NULL, '2022-07-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1513, '1648881414389366785', NULL, 14, NULL, NULL, '2022-07-07 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1514, '1648881413584060417', NULL, 50, '同意。', NULL, '2022-05-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1515, '1648881413584060417', NULL, 14, NULL, NULL, '2022-05-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1516, '1648881416293580802', NULL, 50, '同意。', NULL, '2022-05-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1517, '1648881416293580802', NULL, 14, NULL, NULL, '2022-05-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1518, '1648881413500174338', NULL, 50, '同意。', NULL, '2022-03-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1519, '1648881413500174338', NULL, 14, NULL, NULL, '2022-03-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1520, '1648881411499491375', NULL, 46, '同意。', NULL, '2023-10-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1521, '1648881411499491375', NULL, 14, NULL, NULL, '2023-10-18 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1522, '1648881412002807809', NULL, 46, '同意。', NULL, '2023-02-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1523, '1648881412002807809', NULL, 14, NULL, NULL, '2023-02-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1524, '1648881411499491372', NULL, 46, '同意。', NULL, '2023-09-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1525, '1648881411499491372', NULL, 14, NULL, NULL, '2023-09-28 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1526, '1648881414473252866', NULL, 50, '同意。', NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1527, '1648881414473252866', NULL, 14, NULL, NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1528, '1648881413667946498', NULL, 46, '同意。', NULL, '2022-11-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1529, '1648881413667946498', NULL, 14, NULL, NULL, '2022-11-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1530, '1648881413072355329', NULL, 50, '同意。', NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1531, '1648881413072355329', NULL, 14, NULL, NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1532, '1648881411122003970', NULL, 46, '同意。', NULL, '2023-05-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1533, '1648881411122003970', NULL, 14, NULL, NULL, '2023-05-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1534, '1648881410781807294', NULL, 50, '同意。', NULL, '2020-03-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1535, '1648881410781807294', NULL, 14, NULL, NULL, '2020-03-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1536, '1648881410640506692', NULL, 50, '同意。', NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1537, '1648881410640506692', NULL, 14, NULL, NULL, '2022-01-11 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1538, '1648881412682285058', NULL, 46, '同意。', NULL, '2022-11-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1539, '1648881412682285058', NULL, 14, NULL, NULL, '2022-11-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1540, '1648881413131075586', NULL, 50, '同意。', NULL, '2022-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1541, '1648881413131075586', NULL, 14, NULL, NULL, '2022-06-16 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1542, '1648881410116992716', NULL, 46, '同意。', NULL, '2022-12-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1543, '1648881410116992716', NULL, 14, NULL, NULL, '2021-12-30 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1544, '1648881410582765611', NULL, 50, '同意。', NULL, '2022-04-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1545, '1648881410582765611', NULL, 14, NULL, NULL, '2022-04-19 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1546, '1648881410247956787', NULL, 46, '同意。', NULL, '2023-10-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1547, '1648881410247956787', NULL, 14, NULL, NULL, '2023-10-27 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1548, '1648881410368129016', NULL, 46, '同意。', NULL, '2023-06-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1549, '1648881410368129016', NULL, 14, NULL, NULL, '2023-06-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1550, '1648881410407248219', NULL, 50, '同意。', NULL, '2020-09-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1551, '1648881410407248219', NULL, 14, NULL, NULL, '2020-09-22 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1552, '1648881410883138636', NULL, 46, '同意。', NULL, '2022-12-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1553, '1648881410883138636', NULL, 14, NULL, NULL, '2022-12-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1554, '1648881410498756858', NULL, 50, '同意。', NULL, '2020-10-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1555, '1648881410498756858', NULL, 14, NULL, NULL, '2020-10-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1556, '1648881410299732520', NULL, 46, '已核。', NULL, '2024-03-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1557, '1648881410299732520', NULL, 14, NULL, NULL, '2024-03-04 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1558, '1648881410507178532', NULL, 46, '已核。', NULL, '2024-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1559, '1648881410507178532', NULL, 14, NULL, NULL, '2024-01-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1560, '1648881410700168790', NULL, 46, '同意。', NULL, '2023-12-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1561, '1648881410700168790', NULL, 14, NULL, NULL, '2023-12-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1562, '1648881414066405379', NULL, 50, '同意。', NULL, '2021-12-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1563, '1648881414066405379', NULL, 14, NULL, NULL, '2021-12-01 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1564, '1648881415815430146', NULL, 46, '同意。', NULL, '2022-09-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1565, '1648881415815430146', NULL, 14, NULL, NULL, '2022-09-20 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1566, '1648881410911342315', NULL, 50, '同意。', NULL, '2021-06-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1567, '1648881410911342315', NULL, 14, NULL, NULL, '2021-06-08 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1568, '1648881410738925672', NULL, 50, '同意。', NULL, '2021-10-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1569, '1648881410738925672', NULL, 14, NULL, NULL, '2021-10-15 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1570, '1648881410113168220', NULL, 46, '同意。', NULL, '2023-11-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1571, '1648881410113168220', NULL, 14, NULL, NULL, '2023-11-09 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1572, '1648881418575282177', NULL, 50, '同意', NULL, '2020-08-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1573, '1648881418575282177', NULL, 14, NULL, NULL, '2020-08-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1574, '1648881417862250498', NULL, 50, '同意。', NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1575, '1648881417862250498', NULL, 14, NULL, NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1576, '1648881410746976608', NULL, 50, '同意。', NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1577, '1648881410746976608', NULL, 14, NULL, NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1578, '1648881418696916993', NULL, 50, '同意。', NULL, '2020-10-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1579, '1648881418696916993', NULL, 14, NULL, NULL, '2020-10-13 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1580, '1648881410441228534', NULL, 50, '同意。', NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1581, '1648881410441228534', NULL, 14, NULL, NULL, '2020-11-03 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1582, '1648881410136522882', NULL, 46, '已核。', NULL, '2024-03-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1583, '1648881410136522882', NULL, 14, NULL, NULL, '2024-03-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1584, '1648881414750076930', NULL, 50, '同意。', NULL, '2021-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1585, '1648881414750076930', NULL, 14, NULL, NULL, '2021-08-05 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1586, '1648881410407875991', NULL, 50, '同意。', NULL, '2021-01-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1587, '1648881410407875991', NULL, 14, NULL, NULL, '2021-01-26 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1588, '1648881410443000246', NULL, 46, '同意', NULL, '2022-08-25 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1589, '1648881410443000246', NULL, 14, NULL, NULL, '2022-08-17 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1590, '1648881418273292290', NULL, 50, '同意。', NULL, '2020-07-23 00:00:00');
INSERT INTO `cmc_contract_comment` VALUES (1591, '1648881418273292290', NULL, 14, NULL, NULL, '2020-07-23 00:00:00');

-- ----------------------------
-- 35、cmc合同会审表
-- ----------------------------
drop table if exists `cmc_contract_meeting`;
create table `cmc_contract_meeting`  (
  `meeting_id` 		bigint not null  auto_increment comment '合同会审id',
  `contract_id` 	char(19)  		default null comment '合同id',
  `meeting_time` 	date  			default null comment '评审时间',
  `host_id` 		bigint 			default null comment '评审主持人',
  `place` 			char(1)  		default null comment '评审地点',
  `users` 			varchar(50)  	default null comment '参与评审人',
  `conclusion` 		varchar(255) 	default null comment '评审结论',
  `document` 		varchar(255)  	default null comment '评审意见表',
  `comment_time` 	date 			default null comment '总结时间',
  primary key (`meeting_id`)
) engine = innodb comment = 'cmc合同会审表';

-- ----------------------------
-- 初始化-合同会审表数据
-- ----------------------------

-- ----------------------------
-- 36、cmc合同回款表
-- ----------------------------
drop table if exists `cmc_contract_payment`;
create table `cmc_contract_payment`  (
  `payment_id` 			bigint not null  auto_increment comment '合同回款id',
  `contract_id` 		char(19)  		default null comment '合同id',
  `payment_condition` 	varchar(255)  	default null comment '回款条件',
  `payment_percentage` 	varchar(5)  	default null comment '回款比例',
  `payment_amount` 		varchar(10)  	default null comment '回款金额',
  `payment_time` 		date			default null comment '回款预计时间',
  `remark` 				varchar(255)  	default null comment '回款备注',
  primary key (`payment_id`)
) engine = innodb comment = 'cmc合同回款表';

-- ----------------------------
-- 初始化-合同回款表数据
-- ----------------------------
INSERT INTO `cmc_contract_payment` VALUES (1, '1.65888141481372e18', '合同费用经甲方审核完毕后，乙方向甲方提交相应金额增值税专用发票，投标人视项目业主付款情况，经甲方审核无误后30个工作日内支付。', '97', '5141079.79', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (2, '1.65888141481372e18', '质量保证金（合同结算总额的3%）从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '3', '159002.47', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (3, '1.65888141078076e18', '乙方出具该项目的正式勘测定界报告后，甲方支付乙方合 同总价的 30% 。', '30', '270690', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (4, '1.65888141078076e18', '乙方取得主管部门出具的该项目临时用地手续后，甲方支 付乙方合同总价的 30% 。', '30', '270690', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (5, '1.65888141078076e18', '乙方取得四川省人民政府对该项目的用地批复后，甲方支 付乙方合同总价的 30% 。', '30', '270690', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (6, '1.65888141078076e18', '乙方取得该项目的不动产登记证后，甲方支付乙方合同总 价的 10% 。', '10', '90230', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (7, '1.64888142127641e18', '本合同签订后10日内，发包人收到承包人出具的相应金额的增值税发票后，发包人支付给承包人的金额为签约合同价格的30%', '30', '178360.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (8, '1.64888142127641e18', '承包人完成全部测绘成果且通过审核后10日内，发包人收到承包人出具的相应金额的增值税发票后，发包人支付给承包人的金额为签约合同价格的65%', '65', '386447.75', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (9, '1.64888142127641e18', '项目完工验收完成后10日内，发包人收到承包人出具的相应金额的增值税发票后，发包人支付给承包人的金额为签约合同价格的5%', '5', '29726.75', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (10, '1.64888141916248e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '111900', '2020-10-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (11, '1.64888141907021e18', '本合同在乙方提交中间成果资料后，可以支付进度款', '30', '158160', '2021-08-24', NULL);
INSERT INTO `cmc_contract_payment` VALUES (12, '1.64888141907021e18', '乙方全部完成任务，提交的相应产品经甲方验收合格，即可办理结算手续。', '70', '369040', '2021-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (13, '1.64888141892341e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (14, '1.64888141892341e18', '合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款，在甲方付款前乙方需向甲方提交相应金额增值税专用发票。', NULL, NULL, NULL, '甲方收到项目业主相应结算款之后的20日内，以银行转账方式支付。');
INSERT INTO `cmc_contract_payment` VALUES (15, '1.64888141892341e18', '质量保证金从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (16, '1.64888141891083e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (17, '1.64888141891083e18', '合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款，在付款前乙方向甲方提交相应金额增值税专用发票。', '95', '1318600', NULL, '甲方收到项目业主相应结算款之后的20日内，以银行转账方式支付。');
INSERT INTO `cmc_contract_payment` VALUES (18, '1.64888141891083e18', '质量保证金从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '5', '69400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (19, '1.64888141889405e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '190000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (20, '1.64888141889405e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (21, '1.64888141882275e18', '本合同签订生效后，甲方向乙方支付合同总价的30%', '30', '8045', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (22, '1.64888141882275e18', '乙方向甲方提交中间成果报告后，甲方向乙方支付合同总价的30%', '30', '8045', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (23, '1.64888141882275e18', '本项目最终成果报告经甲方验收合格后，甲方向乙方支付合同总价的40%', '40', '10725', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (24, '1.64888141879338e18', '完成所有配合测量工作后，一次性支付本合同的全部费用。', '100', '16500', '2021-06-21', NULL);
INSERT INTO `cmc_contract_payment` VALUES (25, '1.64888141876402e18', '合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '97', '379464', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (26, '1.64888141876402e18', '质量保证金从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '3', '11736', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (27, '1.64888141869692e18', '本合同在乙方提交工作范围内的所有中间成果资料后，甲方向乙方支付进度款（合同额的80%）', '80', '183200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (28, '1.64888141869692e18', '乙方全部完成任务，提交的相应产品经甲方验收合格，即可办理结算手续。', '20', '45800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (29, '1.64888141864239e18', '项目完成并提交给业主方验收后，依据实际完成工程量及合同单价计算本合同总金额', '100', NULL, '2020-06-30', '项目完成并提交给业主方验收后，依据实际完成工程量及合同单价计算本合同总金额，乙方开具与本合同总价等额的增值税普通发票，甲方在7个工作日内支付全部款项。');
INSERT INTO `cmc_contract_payment` VALUES (30, '1.64888141860884e18', '合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款', '100', '497000', NULL, '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。');
INSERT INTO `cmc_contract_payment` VALUES (31, '1.64888141859206e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '110700', NULL, '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。');
INSERT INTO `cmc_contract_payment` VALUES (32, '1.64888141857528e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '45000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (33, '1.64888141852495e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '300000', '2020-10-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (34, '1.6488814184117e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '95300', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (35, '1.64888141839912e18', '取得施工图审查合格证、甲方收到业主方该笔付款、乙方提供甲方认可的合格支付凭证后20个工作日内', '45', '139275', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (36, '1.64888141839912e18', '取得施工图审查合格证和预算评审结果、甲方收到业主方该笔付款、乙方提供甲方认可的合格支付凭证后20个工作日内', '25', '77375', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (37, '1.64888141839912e18', '通过竣工验收 、甲方收到业主方该笔付款、乙方提供甲方认可的合格支付凭证后20个工作日内', '20', '61900', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (38, '1.64888141839912e18', '完成结算财审、甲方收到业主方该笔付款、乙方提供甲方认可的合格支付凭证后20个工作日内', '7', '21665', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (39, '1.64888141839912e18', '通过质保期后验收、甲方收到业主方该笔付款、乙方提供甲方认可的合格支付凭证后20个工作日内', '3', '9285', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (40, '1.6488814183404e18', '提交经审查合格的设计成果，乙方提供甲方认可的支付申请及增值税专用发票等合格支付凭证后30个工作日内，支付至合同价款的80%。', '80', '46800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (41, '1.6488814183404e18', '工程完工验收合格后，乙方提供甲方认可的支付申请及增值税专用发票等合格支付凭证后30个工作日内，支付至合同价款的100%。', '20', '11700', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (42, '1.64888141832782e18', '本合同在乙方提交工作范围内的所有中间成果资料后，甲方向乙方支付进度款（合同额的80%）', '80', '55200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (43, '1.64888141832782e18', '乙方全部完成任务，提交的相应产品经甲方验收合格，即可办理结算手续。合同结算款（合同额的20%）', '20', '13800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (44, '1.64888141829007e18', '提交测绘成果后', '30', '636000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (45, '1.64888141829007e18', '报告通过主管部门审查后', '50', '1060000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (46, '1.64888141829007e18', '界桩和标示牌成果经主管部门验收合格后', '20', '424000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (47, '1.64888141827329e18', '合同签订后完成所有外业工作后支付70%', '70', '3346000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (48, '1.64888141827329e18', '提交全套成果并经验收合格后支付剩余 30%', '30', '1434000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (49, '1.64888141825651e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '932524', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (50, '1.64888141822715e18', '（1）合同签订后十五日内，支付至合同总价款的 20%；', '20', '456000', NULL, '每期付款前乙方应提供合规的增值税发票给甲方。');
INSERT INTO `cmc_contract_payment` VALUES (51, '1.64888141822715e18', '（2）提交所有成果文件后十五日内，支付至合同总价款的 50%；', '30', '684000', NULL, '每期付款前乙方应提供合规的增值税发票给甲方。');
INSERT INTO `cmc_contract_payment` VALUES (52, '1.64888141822715e18', '（3）成果文件通过甲方组织的审查后十五日内，支付至合同总价款的 100%；', '50', '1140000', NULL, '每期付款前乙方应提供合规的增值税发票给甲方。');
INSERT INTO `cmc_contract_payment` VALUES (53, '1.64888141803422e18', '一次性付款：自委托人出具服务项目验收合格的证明后，受托人应提供符合国家规定的等额增值税专用发票，经委托人逐级审核后，于15工作日内按最终核定的金额支付相应款项。', '100', '1296500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (54, '1.6488814179713e18', '合同签订生效后14个工作日内，甲方向乙方支付合同总金额的30%', '30', '291315.73', '2020-11-10', NULL);
INSERT INTO `cmc_contract_payment` VALUES (55, '1.6488814179713e18', '乙方完成控制网复建与观测工作，包括第二条约定的全部工作内容并提交7.6条约定的相应成果资料，通过甲方验收后，甲方向乙方支付合同总金额的70％', '70', '679736.69', '2020-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (56, '1.64888141786225e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '21732', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (57, '1.64888141783708e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方审核完毕后一次性结算付款。', '100', '629800', NULL, '质量保证金（合同金额的3%）从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。');
INSERT INTO `cmc_contract_payment` VALUES (58, '1.64888141780772e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '97', '696007.01', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (59, '1.64888141780772e18', '质量保证金从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '3', '21525.99', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (60, '1.64888141779514e18', '合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款', '100', '26100', NULL, '本合同不扣减质量保证金（乙方：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。');
INSERT INTO `cmc_contract_payment` VALUES (61, '1.64888141776997e18', '提交测绘成果后', '30', '448500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (62, '1.64888141776997e18', '报告通过主管部门审查后', '50', '747500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (63, '1.64888141776997e18', '界桩和标示牌成果经主管部门验收合格', '20', '299000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (64, '1.64888141756445e18', '本项目在收到乙方提交的正式成果并经甲方验收合格后一次性支付。', '100', '64800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (65, '1.64888141747218e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '94700', '2021-03-05', NULL);
INSERT INTO `cmc_contract_payment` VALUES (66, '1.64888141736732e18', '乙方完成所有工作并提交成果资料给甲方后，甲方10日内一次性支付所有合同款项。', '100', '52000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (67, '1.64888141704436e18', '乙方完成所有设计工作，由甲方验收合格，乙方提交相应增值税专用发票后一次性支付。', '100', '52800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (68, '1.64888141700661e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '225100', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (69, '1.64888141700661e18', '本合同不扣减质量保证金（承包人承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (70, '1.6488814167927e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方审核完毕后一次性结算付款。', '100', '243200', NULL, '质量保证金（总金额的3%）从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。');
INSERT INTO `cmc_contract_payment` VALUES (71, '1.64888141675915e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方审核完毕后一次性结算付款。', '100', '163800', NULL, '质量保证金（总金额的3%）从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。');
INSERT INTO `cmc_contract_payment` VALUES (72, '1.6488814167214e18', '本合同在乙方提交工作范围内的所有中间成果资料后，甲方向乙方支付进度款', '80', '716000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (73, '1.6488814167214e18', '乙方全部完成任务，提交的相应产品经甲方验收合格，即可办理结算手续。', '20', '179000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (74, '1.64888141662074e18', '完成野处测量、内业资料编制计算并形成报告且经审查合格后支付合同金额的50%。', '50', '1075000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (75, '1.64888141662074e18', '完成河湖管理范围划定管理线桩（牌）并经验收合格后支付合同金额的30%。', '30', '645000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (76, '1.64888141662074e18', '项目完工并经验收合格后支付合同金额的17%。', '17', '365500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (77, '1.64888141662074e18', '维修期满后支付合同金额的3%。', '3', '64500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (78, '1.64888141660396e18', '乙方完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。甲方在收到乙方的结算申请后，根据合同价款及调整、质量条款规定、违约责任等，在规定时间内办理完成合同结算手续。合同结算款的支付除应扣减质量保证金（合同结算总额的5%）外，还应扣减因按“乙方违约”条款的约定应扣减的工作量或违约金，在1月内将余款支付给乙方。', '95', '427500', '2023-04-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (79, '1.64888141660396e18', '质量保证金（合同结算总额的5%）从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '5', '22500', '2023-10-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (80, '1.64888141657879e18', '每年前三个季度，每季度工作完成并经发包人验收合格，发包人在每季度结束后支付合同总价（不含备用金）的20%', '60', '1518210', NULL, '本项目备用金10万元整。');
INSERT INTO `cmc_contract_payment` VALUES (81, '1.64888141657879e18', '每年第四季度工作完成和年报提交后，经发包人验收合格，发包人支付合同总价（不含备用金）的40%', '40', '1012140', NULL, '本项目备用金10万元整。');
INSERT INTO `cmc_contract_payment` VALUES (82, '1.64888141653685e18', '本合同签订生效后，甲方向乙方支付合同总金额的30%', '30', '29916.34', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (83, '1.64888141653685e18', '乙方向甲方提交中间成果报告后，甲方向乙方支付合同总金额的30%', '30', '29916.34', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (84, '1.64888141653685e18', '本项目最终成果报告经甲方验收合格后，甲方向乙方支付合同总金额的40%', '40', '39888.46', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (85, '1.64888141652007e18', '乙方完成外业工作后，甲方1向乙方支付合同总经费的60%', '60', '30000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (86, '1.64888141652007e18', '成果资料提交后5日内，甲方1向乙方支付合同总经费的40%', '40', '20000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (87, '1.64888141644457e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '97', '246477', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (88, '1.64888141644457e18', '质量保证金从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '3', '7623', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (89, '1.6488814164278e18', '合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '845000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (90, '1.6488814164278e18', '本合同不扣减质量保证金（承包人承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (91, '1.64888141641102e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '97', '808495', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (92, '1.64888141641102e18', '质量保证金从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '3', '25005', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (93, '1.64888141637747e18', '本工程无预付款，项目实施完成后经甲方组织人员对乙方实际投入的人工及完成的工程量、质量等检查、验收并签字确认后，按实际发生的工程量向乙方支付工程款的97%，且应与主合同收款相匹配。', '97', '1744855.4', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (94, '1.64888141637747e18', '质量保证金按结算合同经费的3%暂扣，若无质量问题，在完工半年后支付。', '3', '53964.6', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (95, '1.64888141636069e18', '合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款', '100', '44800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (96, '1.64888141634391e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方审核完毕后一次性结算付款', '100', '48700', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (97, '1.64888141632713e18', '乙方向甲方提交中间成果报告后，甲方向乙方支付合同总金额的50%', '50', '19500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (98, '1.64888141632713e18', '本项目最终成果报告经甲方验收合格后，甲方向乙方支付合同总金额的50%', '50', '19500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (99, '1.64888141629358e18', '本项目在收到乙方提交的正式成果并经甲方验收合格后一次性支付。', '100', '70000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (100, '1.64888141626003e18', '乙方完成所有设计工作，由甲方验收合格，乙方提交相应增值税专用发票后一次性支付。', '100', '214000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (101, '1.64888141624325e18', '合同签订后，乙方开具与本合同总价等额的增值税专用发票，项目完成并提交给甲方验收后，甲方在7个工作日内支付全部款项。', '100', '85000', '2021-05-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (102, '1.64888141624325e18', '因工程需要，测绘工作量或工作内容需要增加时，增加的测绘费用双方另行商定。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (103, '1.64888141622647e18', '本项目在收到乙方提交的正式成果并经甲方验收合格后一次性支付。', '100', '231000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (104, '1.64888141621389e18', '合同签订并完成全部外业工作后，乙方向甲方提出支付申请，甲方接到乙方支付申请后15天内向乙方支付合同总费用的50%。', '50', '8242900', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (105, '1.64888141621389e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。', '45', '7418610', NULL, '合同结算款的支付除应扣减已支付进度款和质量保证金（合同结算总额的5%）外,还应扣减因按“乙方违约”条款的约定应扣减的工作量或违约金，在1月内将余款支付给乙方。');
INSERT INTO `cmc_contract_payment` VALUES (106, '1.64888141621389e18', '质量保证金（合同结算总额的5%）从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '5', '824290', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (107, '1.64888141616356e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '89800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (108, '1.64888141616356e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (109, '1.64888141602934e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同结算款的支付除扣减质量保证金（合同结算总额的3%）外还应扣减因按“乙方违约”条款的约定应扣减的工作量或违约金，在1月内将余款支付给乙方。', '97', '580060', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (110, '1.64888141602934e18', '质量保证金从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '3', '17940', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (111, '1.64888141596223e18', '乙方向甲方提交中间成果报告后，甲方向乙方支付合同总金额的50%', '50', '113675', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (112, '1.64888141596223e18', '本项目最终成果报告经甲方验收合格后，甲方向乙方根据甲方验收、确认后实际完成的工作量支付剩余合同款。', '50', '113675', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (113, '1.64888141593287e18', '乙方根据合同提交耕地调查成果，并经甲方验收后，乙方向甲方提出支付申请，甲方收到乙方支付申请后15天内向乙方支付合同总费用的100%', '100', '32000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (114, '1.6488814159119e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款。', '100', '556130', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (115, '1.64888141589512e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款。', '100', '407227', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (116, '1.64888141586157e18', '在收到乙方提交的本项目正式成果并经甲方验收合格后一次性支付。', '100', '203500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (117, '1.64888141581543e18', '本工程无预付款，工程进度款根据甲方主合同收款同比例向乙方支付工程进度款。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (118, '1.64888141581543e18', '安全措施费结算：安全措施费为专项费用，应年度据实结算，乙方办理结算时应出具安全物资采购或使用证明材料并由甲方签字确认后按实际发生的工程量结算；现场安全物资是由甲方发放的，在办理结算时应由甲方签字确认后按实际发生的工程量扣除安全措施费。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (119, '1.64888141581543e18', '质保金结算：质量保证金按结算合同经费的3%在最后一期结算时暂扣，若无质量问题，在完工半年后支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (120, '1.64888141579865e18', '甲方对乙方提交的资料审核完毕且合格后一次性结算付款', '100', '176100', '2022-01-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (121, '1.64888141578187e18', '项目完成并提交给甲方验收后，乙方根据合同总金额开具与等额的增值税专用发票给甲方，甲方在7个工作日内支付全部款项。', '100', '51516', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (122, '1.64888141572735e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '79184.88', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (123, '1.64888141572735e18', '本合同不扣减质量保证金（承包人承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (124, '1.64888141568541e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '82840.47', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (125, '1.64888141568541e18', '本合同不扣减质量保证金（承包人承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (126, '1.64888141566863e18', '合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款', '100', '107800', NULL, '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。');
INSERT INTO `cmc_contract_payment` VALUES (127, '1.64888141563088e18', '在收到乙方提交的本项目正式成果并经甲方验收合格后一次性支付。', '100', '125000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (128, '1.64888141556797e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '240000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (129, '1.64888141556797e18', '本合同不扣减质量保证金（承包人承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (130, '1.64888141549247e18', '乙方完成控制网建设与观测工作，包括第二条约定的全部工作内容并提交7.6条约定的相应成果资料，通过甲方验收后，甲方向乙方支付合同全部金额', '100', '380485.41', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (131, '1.64888141547569e18', '乙方完成所有航测工作并提交给甲方验收后，乙方根据合同总金额开具与等额的增值税专用发票给甲方，甲方在7个工作日内一次性支付全部款项。', '100', '194000', '2021-10-15', NULL);
INSERT INTO `cmc_contract_payment` VALUES (132, '1.64888141544633e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '70000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (133, '1.64888141544633e18', '本合同不扣减质量保证金（承包人承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (134, '1.64888141542955e18', '本合同在乙方提交工作范围内的所有中间成果资料后，甲方向乙方支付进度款（合同额的80%）', '80', '193600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (135, '1.64888141542955e18', '乙方全部完成任务，提交的相应产品经甲方验收合格，即可办理结算手续。', '20', '48400', NULL, '合同结算款的支付应扣减已拨付进度款外，还应扣减因按“乙方违约”条款的约定应扣减的工作量或违约金，在1月内将余款支付给乙方，结算款（合同额的20%）。');
INSERT INTO `cmc_contract_payment` VALUES (136, '1.64888141541278e18', '合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '768500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (137, '1.64888141541278e18', '质量保证金从发包人验收合格之日起算，若无质量问题，半年后无息全额返还。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (138, '1.64888141537503e18', '乙方完成地形图测绘中间成果，并提交相关成果文件初稿经甲方认可，在甲方收到乙方出具的相应金额的增值税专用发票后的60天内，甲方支付给乙方的金额为签约合同价格的20%', '20', '14400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (139, '1.64888141537503e18', '乙方完成地形图测绘送审稿，提交相关成果文件经甲方认可，经甲方确认，并在收到乙方出具的相应金额的增值税专用发票后的60天内，甲方支付给乙方的金额为签约合同价格的40%', '40', '28800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (140, '1.64888141537503e18', '在乙方完成了全部合同工作，最终成果报告经审查验收合格后的42天（以甲方出具的最终成果验收合格证明的日期起算）内，甲方与乙方应办理合同最终结算手续。双方就最终结算没有异议并签字确认后的35天内，甲方将最终的合同价格减去累计已支付的金额后的余额支付给乙方', '40', '28800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (141, '1.64888141536244e18', '按照部、省要求开展工作，成果经过部、省审查验收合格后支付80%', '80', '1092000', '2021-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (142, '1.64888141536244e18', '成果经过部、省审查验收合格一年后支付20%', '20', '273000', '2022-10-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (143, '1.64888141534986e18', '乙方完成泸县自然资源九曲河确权登记项目测绘及调查工作并将成果交由甲方15个工作日内，甲方支付给乙方合同价款的70%', '70', '69750.45', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (144, '1.64888141534986e18', '泸县九曲河自然资源不动产登记证书颁发15个工作日内，甲方支付给乙方合同价款的30%', '30', '29893.05', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (145, '1.64888141528695e18', '甲方对乙方提交的资料审核完毕且合格后一次性结算付款', '100', '227100', NULL, '本合同不扣减质量保证金');
INSERT INTO `cmc_contract_payment` VALUES (146, '1.64888141526598e18', '完成现场所有测绘工作并最终成果验收合格', '97', '116964.07', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (147, '1.64888141526598e18', '最终成果验收合格后半年', '3', '3617.45', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (148, '1.64888141524081e18', '本合同签订生效后，乙方向甲方提交中间成果报告，甲方向乙方支付合同总金额的50%', '50', '155950', NULL, '每期实际支付款须扣减本期应支付款项10%的质量保证金及其他应扣款项。');
INSERT INTO `cmc_contract_payment` VALUES (149, '1.64888141524081e18', '本项目最终成果报告经甲方验收合格后，甲方向乙方支付合同总金额的50%', '50', '155950', NULL, '每期实际支付款须扣减本期应支付款项10%的质量保证金及其他应扣款项。');
INSERT INTO `cmc_contract_payment` VALUES (150, '1.64888141504787e18', '完成现场所有测绘工作并最终成果验收合格', '97', '449393.84', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (151, '1.64888141504787e18', '最终成果验收合格后半年', '3', '13898.78', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (152, '1.6488814150269e18', '完成林权登记数据整合建库入库并完成汇交，支付合同金额的50%', '50', '1900000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (153, '1.6488814150269e18', '项目履约完成经采购方组织验收合格，支付合同金额的40%', '40', '1520000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (154, '1.6488814150269e18', '项目售后服务期满即验收合格后一年，支付剩余10%款项。', '10', '380000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (155, '1.64888141500173e18', '本项目在完成合同全部实物指标调查配合工作以及收到乙方提交的正式成果并经甲方验收合格后一次性支付。', '100', '243000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (156, '1.64888141490527e18', '本项目在收到乙方提交的正式成果并经甲方验收合格后一次性支付。', '100', '55300', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (157, '1.6488814148801e18', '甲方对乙方提交的资料审核完毕且合格后一次性结算付款', '100', '207200', '2021-12-31', '本合同不扣减质量保证金（承包人承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。');
INSERT INTO `cmc_contract_payment` VALUES (158, '1.64888141485913e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (159, '1.64888141485913e18', '合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款，在付款前乙方向甲方提交相应金额增值税专用发票。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (160, '1.64888141485913e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (161, '1.64888141477524e18', '本合同签订后，甲方向乙方支付预付款（合同额的20%）', '20', '45900', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (162, '1.64888141477524e18', '本合同在乙方提交工作范围内的所有中间成果资料后，甲方向乙方支付进度款（合同额的40%）', '40', '91800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (163, '1.64888141477524e18', '乙方全部完成任务，提交的相应产品经甲方验收合格，即可办理结算手续。合同结算款的支付应扣减已拨付进度款外，还应扣减因按“乙方违约”条款的约定应扣减的工作量或违约金，在1月内将余款支付给乙方，结算款（合同额的40%）', '40', '91800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (164, '1.64888141475008e18', '合同签订后，乙方完成界桩制作、界桩放线与测量后，乙方向甲方提出支付申请，甲方接到乙方支付申请后15天内向乙方支付合同总费用的30% ', '30', '345000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (165, '1.64888141475008e18', '乙方完成界桩运输、埋设等工作后，乙方向甲方提出支付申请，甲方接到乙方支付申请后15天内向乙方支付合同总费用的50% ', '50', '575000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (166, '1.64888141475008e18', '乙方界桩测设红线图制作及内业数据处理等工作并经甲方验收、移交并配合完成后续工作后，乙方向甲方提出支付申请，甲方接到乙方支付申请后15天内向乙方支付合同总费用的20% ', '20', '230000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (167, '1.64888141469555e18', '本项目在收到乙方提交的正式成果并经甲方验收合格后一次性支付。', '100', '1810000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (168, '1.64888141467458e18', '在收到乙方提交的本项目正式成果并经甲方验收合格后一次性支付。', '100', '230000', '2022-02-28', NULL);
INSERT INTO `cmc_contract_payment` VALUES (169, '1.64888141464102e18', '合同签订并完成全部JW梯级水电站外业工作后，乙方向甲方提出支付申请，甲方接到乙方支付申请后15天内向乙方支付合同总费用（JW部分）的40%', NULL, '9883675', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (170, '1.64888141464102e18', '合同签订并完成全部ML水库电站外业工作后，乙方向甲方提出支付申请，甲方接到乙方支付申请后15天内向乙方支付合同总费用（ML部分）的40%。', NULL, '2061638.8', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (171, '1.64888141464102e18', '完成合同中JW梯级水电站全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。', NULL, '14084238.3', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (172, '1.64888141464102e18', '完成合同中ML水库电站全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。', NULL, '2937835.29', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (173, '1.64888141464102e18', '质量保证金（合同结算总额的3%）从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '3', '895898.61', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (174, '1.64888141460328e18', '压力钢管永久变形监测服务工作结束，并经甲方验收合格后，乙方按合同规定提供甲方所需资料甲方支付合 同金额的 100%给乙方', '100', '899000', '2022-11-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (175, '1.6488814145823e18', '乙方将所有成果资料交由甲方验收合格后，按项目回款比例支付测绘技术服务费用。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (176, '1.64888141454456e18', '2020年度计划实施的项目，乙方全面提交内外业成果资料（含有测绘产品质量检验资质机构出具的检验合格报告），并通过甲方组织的项目验收和不动产登记中心认可采用后，支付项目总价款的25%。', '25', '397500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (177, '1.64888141454456e18', '2021年度计划实施的项目，乙方全面提交内外业成果资料（含有测绘产品质量检验资质机构出具的检验合格报告），并通过甲方组织的项目验收和不动产登记中心认可采用后，支付项目总价款的25%。', '25', '397500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (178, '1.64888141454456e18', '2022年度计划实施的项目，乙方全面提交内外业成果资料（含有测绘产品质量检验资质机构出具的检验合格报告），并通过甲方组织的项目验收和不动产登记中心认可采用后，支付项目总价款的25%。', '25', '397500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (179, '1.64888141454456e18', '2023年度计划实施的项目，乙方全面提交内外业成果资料（含有测绘产品质量检验资质机构出具的检验合格报告），并通过甲方组织的项目验收和不动产登记中心认可采用后，支付项目总价款的25%。', '25', '397500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (180, '1.64888141452778e18', '甲方对乙方提交的资料审核完毕且合格后一次性结算付款', '100', '222200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (181, '1.648881414511e18', '甲方对乙方提交的资料审核完毕且合格后一次性结算付款', '100', NULL, '2022-01-31', '本合同不扣减质量保证金');
INSERT INTO `cmc_contract_payment` VALUES (182, '1.64888141447325e18', '本项目在收到乙方提交的正式成果并经甲方验收合格后一次性支付。', '100', '233000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (183, '1.64888141447325e18', '费用（结算款）经甲方审核完毕后，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (184, '1.64888141438937e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '97', '800347', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (185, '1.64888141438937e18', '质量保证金（合同结算总额的3%）从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '3', '24753', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (186, '1.64888141435581e18', '乙方按照合同约定向甲方提交最终成果及相关资料并经甲方验收合格后，甲方向乙方支付合同总价的100%', '100', '44388', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (187, '1.6488814142929e18', '完成现场所有测绘工作并最终成果验收合格', '97', '104603.87', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (188, '1.6488814142929e18', '最终成果验收合格后半年', '3', '3235.17', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (189, '1.64888141427612e18', '完成现场所有测绘工作并最终成果验收合格', '97', '149151.77', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (190, '1.64888141427612e18', '最终成果验收合格后半年', '3', '4612.94', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (191, '1.64888141425934e18', '完成现场所有测绘工作并最终成果验收合格', '97', '178325.57', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (192, '1.64888141425934e18', '最终成果验收合格后半年', '3', '5515.22', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (193, '1.64888141423418e18', '乙方完成最终成果经验收合格后，提供甲方认可的支付申请及增值税专用发票，甲方在15个工作日内支付乙方合同价款的100%', '100', '91000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (194, '1.64888141419223e18', '完成现场所有测绘工作并最终成果验收合格', '97', '113851.38', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (195, '1.64888141419223e18', '最终成果验收合格后半年', '3', '3521.18', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (196, '1.64888141411674e18', '乙方完成第二条约定的全部工作内容并通过甲方验收后，甲方向乙方支付合同全部金额', '100', '73171.39', '2022-01-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (197, '1.6488814140664e18', '本合同签订生效且乙方进场监测并出具第一期监测报告后15个工作日内，甲方向乙方支付合同总价的20%', '20', '480000', NULL, '乙方每次收款前，应向甲方提供足额的增值税发票，否则甲方有权暂停付款直至乙方按约提供发票，且甲方不视为违约。');
INSERT INTO `cmc_contract_payment` VALUES (198, '1.6488814140664e18', '监测工作每半年支付合同总价的10%，支付至90%时停止支付。', '70', '1680000', NULL, '乙方每次收款前，应向甲方提供足额的增值税发票，否则甲方有权暂停付款直至乙方按约提供发票，且甲方不视为违约。');
INSERT INTO `cmc_contract_payment` VALUES (199, '1.6488814140664e18', '监测工作全部完成，验收合格，提交全部监测报告后，支付剩余费用。', '10', '240000', NULL, '乙方每次收款前，应向甲方提供足额的增值税发票，否则甲方有权暂停付款直至乙方按约提供发票，且甲方不视为违约。');
INSERT INTO `cmc_contract_payment` VALUES (200, '1.6488814140664e18', '合同签订后 14 个工作日内支付，合同签订价格的15%', '15', '14250', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (201, '1.6488814140664e18', '甲方施工图设计完成且通过审查并提交成果，收到相应阶段款项后 14 个工作日内支付至合同价的 70%', '55', '52250', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (202, '1.6488814140664e18', '本项目竣工合格，且甲方签署完勘察设计意见、办理完设计资料移交手续且全部设计服务工作完成并办理完设计费结算后、收到相应阶段款项后 14 个工作日内支付。', '30', '28500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (203, '1.64888141392799e18', '乙方完成实施方案中所有工程测量和勘察工作并按第二条要求提交最终成果，同时通过技术审查后支付合同金额的95%', '95', '712500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (204, '1.64888141392799e18', '剩余5%待工程竣工验收通过后支付。', '5', '37500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (205, '1.64888141391122e18', '合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款，在甲方付款前乙方需向甲方提交相应金额增值税专用发票。', '97', '716345', NULL, '甲方收到项目业主相应结算款之后的20日内，以银行转账方式支付。');
INSERT INTO `cmc_contract_payment` VALUES (206, '1.64888141391122e18', '质量保证金从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '3', '22155', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (207, '1.64888141389444e18', '本合同签订生效后，乙方向甲方提交现场初步测量成果，甲方向乙方支付合同总金额的30%', '30', '12900', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (208, '1.64888141389444e18', '乙方完成现场测量，并向甲方提交中间测量成果后，甲方向乙方支付合同总金额的30%', '30', '12900', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (209, '1.64888141389444e18', '本项目最终测量成果经甲方验收合格后，甲方向乙方支付合同总金额的40%', '40', '17200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (210, '1.64888141389444e18', '以上测量费的支付都必须在甲方收到彭州市2021年汛期灾损省县道隐患整治工程（一期）可行性研究报告、详细勘察、初步设计及概算编制服务的相应设计费后，甲方方可向乙方按以上进度支付相应进度款。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (211, '1.64888141387766e18', '乙方向甲方提交中间成果后，甲方向乙方支付合同总价的50%', '50', '43800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (212, '1.64888141387766e18', '本项目最终成果经甲方验收合格后，甲方向乙方支付合同总价的40%', '40', '35040', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (213, '1.64888141387766e18', '项目施工完成后，甲方向乙方支付合同总价的10%', '10', '8760', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (214, '1.64888141386088e18', '阶段验收款：每年前三个季度，每季度工作完成并经发包人验收合格，发包人在每季度结束后支付合同总价（不含备用金）的20%', '20', '506070', NULL, '注：合同备用金10万元整');
INSERT INTO `cmc_contract_payment` VALUES (215, '1.64888141386088e18', '阶段验收款：每年前三个季度，每季度工作完成并经发包人验收合格，发包人在每季度结束后支付合同总价（不含备用金）的20%', '20', '506070', NULL, '注：合同备用金10万元整');
INSERT INTO `cmc_contract_payment` VALUES (216, '1.64888141386088e18', '阶段验收款：每年前三个季度，每季度工作完成并经发包人验收合格，发包人在每季度结束后支付合同总价（不含备用金）的20%', '20', '506070', NULL, '注：合同备用金10万元整');
INSERT INTO `cmc_contract_payment` VALUES (217, '1.64888141386088e18', '竣工验收款：每年第四季度工作完成和年报提交后，经发包人验收合格，发包人支付合同总价（不含备用金）的40%', '40', '1012140', NULL, '注：合同备用金10万元整');
INSERT INTO `cmc_contract_payment` VALUES (218, '1.64888141375183e18', '本项目在完成合同全部实物指标调查配合工作并经甲方验收合格后一次性支付。', '100', '410000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (219, '1.64888141366795e18', '乙方根据合同提交测绘成果，并经甲方验收后，乙方向甲方提出支付申请，甲方收到乙方支付申请后15天内向乙方支付合同总费用的100%', '100', '54000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (220, '1.64888141365117e18', '本项目在收到乙方提交的正式成果并经甲方验收合格后一次性支付。', '100', '235000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (221, '1.64888141358406e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '85000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (222, '1.64888141358406e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (223, '1.64888141351276e18', '本合同签订生效后，乙方向甲方提交现场初步测量成果，甲方向乙方支付合同总金额的30%', '30', '80700', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (224, '1.64888141351276e18', '乙方完成现场测量，并向甲方提交中间测量成果后，甲方向乙方支付合同总金额的30%', '30', '80700', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (225, '1.64888141351276e18', '本项目最终测量成果经甲方验收合格后，甲方向乙方支付合同总金额的40%。', '40', '107600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (226, '1.64888141351276e18', '质量保证金从第三期款项支付完成之日后起算，若无质量问题，180日后无息返还。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (227, '1.64888141350017e18', '合同签订后甲方先按合同价的30%付给乙方做为乙方开工费', '30', '78900', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (228, '1.64888141350017e18', '工程完成提交所有资料后，经验收合格，支付总金额剩余70%的工程款。', '70', '184100', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (229, '1.6488814134834e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同结算款的支付除应扣除的质量保证金（合同结算总金额的3%）', '97', '238620', '2022-07-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (230, '1.6488814134834e18', '质量保证金从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '3', '7380', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (231, '1.64888141346242e18', '技术服务报酬由甲方分期（一次或分期）支付乙方。具体支付方式和时间如下：乙方完成本批次相关工作，经甲方业主验收合格且甲方收到业主该笔款项后，收到乙方开具的本批次合同结算价100%合格增值税专用发票、付款申请后30日内（含本数），甲方向乙方支付本批次合同结算价的100%。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (232, '1.64888141341209e18', '合同签订并完成全部外业工作后，乙方向甲方提出支付申请，甲方接到乙方支付申请后15天内向乙方支付合同总费用的40%。', '40', '1170336', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (233, '1.64888141341209e18', '完成合同全部工作内容，并提交全部成果资料经甲方验收合格后，按合同实际结算金额（扣除已支付的进度款、3%质量保证金及其它需扣减的违约金）', '57', '1667728.8', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (234, '1.64888141341209e18', '测绘成果验收后，无质量问题，半年后无息全额返还3%质量保证金。', '3', '87775.2', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (235, '1.64888141339532e18', '在双方签订合同后，甲方支付50%的进度款', '50', '111502.48', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (236, '1.64888141339532e18', '在一年期观测合同结束后，乙方提交全部监测成果报告（12期），甲方在接受监测报告并通过验收后的30日内支付剩余合同金额', '50', '111502.48', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (237, '1.64888141336176e18', '2021年度国土变更调查更新数据包成果通过省级检查、部最终质量检查并确认，并按要求提供成果（数据、台账、影像等），凭《泸县政府采购项目验收结算报告》、《发票》、《采购合同》在十五个工作日内支付中标金额的95%', '95', '1459010', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (238, '1.64888141336176e18', '余款在一年内无质量问题，无息付清。', '5', '76790', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (239, '1.64888141334498e18', '合同签订后，乙方开具全额合同价的专用增值税发票后45日内，甲方支付合同金额的30%给乙方', '30', '385725.35', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (240, '1.64888141334498e18', '服务工作结束并经甲方验收合格后，乙方按合同规定提供甲方所需资料（纸质版和电子版），60日内甲方支付合同金额的70%给乙方', '70', '900025.82', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (241, '1.64888141332821e18', '乙方完成现场服务并向甲方出具相关报告，并经甲方验收合格后，乙方按合同规定提供甲方所需资料（纸质版和电子版），开具全额合同价的专用增值税发票后60个工作日内，甲方支付合同金额的100%给乙方', '100', '691210', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (242, '1.64888141326529e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '194965.58', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (243, '1.64888141326529e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (244, '1.64888141324432e18', '完成现场所有测绘工作并最终成果验收合格', '97', '2376236.65', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (245, '1.64888141324432e18', '最终成果验收合格后半年', '3', '73491.86', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (246, '1.64888141322754e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '28700', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (247, '1.64888141322754e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (248, '1.64888141318141e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后30个工作日内以银行转账或银行汇票的方式进行支付。', '100', '349081.52', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (249, '1.64888141318141e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (250, '1.64888141316463e18', '乙方按照合同约定向甲方提交中间成果及相关资料并经甲方验收合格后，甲方向乙方支付合同总价的40%', '40', '39200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (251, '1.64888141316463e18', '乙方按照合同约定向甲方提交最终成果及相关资料并经甲方验收合格后，甲方向乙方支付合同总价的60%', '60', '58800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (252, '1.64888141314785e18', '乙方根据合同提交耕地调查成果，并经甲方验收后，乙方向甲方提出支付申请，甲方收到乙方支付申请后15天内向乙方支付合同总费用的100%', '100', '130000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (253, '1.64888141314785e18', '依据本合同“6.2 支付进度”的约定，付款之前，乙方按甲方制定的统一资金结算表格和程序的规定，向甲方提出支付款项的书面申请及合格的增值税专用发票，并经甲方审核无误后15日内，甲方以银行汇款或银行承兑汇票方式支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (254, '1.64888141313107e18', '乙方完成合同要求的全部工作任务并提交最终成果报告经甲方审核合格，在甲方收到业主相应合同付款后，向乙方支付同比例合同款项。', NULL, NULL, NULL, '乙方按甲方制定的统一资金结算表格和程序的规定，向甲方提出拟支付款项的书面申请及合格的增值税专用发票（税率： 6 %），并经甲方审核无误后15日内，甲方以银行汇款方式支付。');
INSERT INTO `cmc_contract_payment` VALUES (255, '1.64888141309333e18', '乙方完成所有工作并按第二条要求提交最终成果后30个工作日内支付所有费用。', '100', '120000', NULL, '甲方付款前，乙方需提供满足甲方要求的等额增值税专用发票。');
INSERT INTO `cmc_contract_payment` VALUES (256, '1.64888141307235e18', '乙方在合同签订之日12个月内完成数据收集，向甲方提供技术规范中要求的成果资料，甲方核实无误后，在收到乙方提供的合格的增值税专用发票和付款申请后60天内一次性付款。', '100', '179000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (257, '1.64888141303041e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '35055', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (258, '1.64888141303041e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (259, '1.64888141300944e18', '合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '38331', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (260, '1.64888141300944e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (261, '1.64888141298427e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '10596', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (262, '1.64888141298427e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (263, '1.64888141294653e18', '承包人完成设计报告中间成果，提交《两河口水电站水光互补一期项目地形图测绘工作中间成果》经发包人认可，并在收到承包人出具的相应金额的增值税发票后的28天内，发包人支付给承包人的金额为签约合同价格的20%。', '20', '92240', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (264, '1.64888141294653e18', '承包人完成设计报告送审稿，提交《两河口水电站水光互补一期项目地形图测绘工作成果报告》经发包人认可，并在收到承包人出具的相应金额的增值税发票后的28天内，发包人支付给承包人的金额为签约合同价格的40%', '40', '184480', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (265, '1.64888141294653e18', '在承包人完成了全部合同工作，最终成果报告经审查验收合格后的42天（以发包人出具的最终成果验收合格证明的日期起算）内，发包人与承包人应办理合同最终结算手续。双方就最终结算没有异议并签字确认后的35天内，发包人将最终的合同价格减去累计已支付的金额后的余额支付给承包人', '40', '184480', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (266, '1.64888141287522e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后30个工作日内以银行转账或银行汇票的方式进行支付。', '100', '247568.12', NULL, '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。');
INSERT INTO `cmc_contract_payment` VALUES (267, '1.64888141281231e18', '承包人完成设计报告中间成果，提交《凉山州甘洛二号及沙岱地块光伏项目地形图测绘工作中间成果》经发包人认可，并在收到承包人出具的相应金额的增值税发票后的28天内，发包人支付给承包人的金额为签约合同价格的20%', '20', '40400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (268, '1.64888141281231e18', '承包人完成设计报告送审稿，提交《凉山州甘洛二号及沙岱地块光伏项目地形图测绘工作成果报告》经发包人认可，并在收到承包人出具的相应金额的增值税发票后的28天内，发包人支付给承包人的金额为签约合同价格的40%', '40', '80800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (269, '1.64888141281231e18', '在承包人完成了全部合同工作，最终成果报告经审查验收合格后的42天（以发包人出具的最终成果验收合格证明的日期起算）内，发包人与承包人应办理合同最终结算手续。双方就最终结算没有异议并签字确认后的35天内，发包人将最终的合同价格减去累计已支付的金额后的余额支付给承包人，为人民币80800元', '40', '80800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (270, '1.64888141277456e18', '乙方提交所有中间成果后，提供甲方认可的支付申请及增值税专用发票等合', '20', '80400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (271, '1.64888141277456e18', '乙方完成全部任务，提交的相应成果经甲方验收合格后，乙方提供甲方认可', '80', '321600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (272, '1.64888141275359e18', '乙方根据合同提交成果，并经甲方验收后，乙方向甲方提出支付申请，甲方收到乙方支付申请后15天内向乙方支付合同总费用的100%', '100', '63000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (273, '1.64888141273681e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后30个工作日内以银行转账或银行汇票的方式进行支付。', '100', '94674.57', '2023-03-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (274, '1.64888141273681e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (275, '1.64888141268228e18', '乙方完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。甲方在收到乙方的结算申请后，根据合同价款及调整、质量条款规定、违约责任等，在规定时间内办理完成合同结算手续。合同结算款的支付除应扣减质量保证金（合同结算总额的5%）外，还应扣减因按“乙方违约”条款的约定应扣减的工作量或违约金，在1月内将余款支付给乙方。', '95', '759778.91', '2022-12-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (276, '1.64888141268228e18', '质量保证金（合同结算总额的5%）从甲方验收合格之日起算，若无质量问题，三个月后无息全额返还。', '5', '39988.36', '2023-03-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (277, '1.64888141263195e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后30个工作日内以银行转账或银行汇票的方式进行支付。', '100', '84960.26', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (278, '1.64888141263195e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (279, '1.6488814125942e18', '第一次合同款支付在承包人完成测绘中间成果，提交《攀枝花三峡光伏发电项目地形图测绘工作中间成果》经发包人认可，并在收到承包人出具的相应金额的增值税发票后的28天内，发包人支付给承包人的金额为签约合同价格的20%，为人民币63994元。', '20', '63994', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (280, '1.6488814125942e18', '第二次合同款支付在承包人完成测绘最终成果送审版，提交《攀枝花三峡光伏发电项目地形图测绘工作成果报告》经发包人认可，并在收到承包人出具的相应金额的增值税发票后的28天内，发包人支付给承包人的金额为签约合同价格的40%，为人民币127987元。', '40', '127987', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (281, '1.6488814125942e18', '在承包人完成了全部合同工作，最终成果报告经审查验收合格后的42天（以发包人出具的最终成果验收合格证明的日期起算）内，发包人与承包人应办理合同最终结算手续。双方就最终结算没有异议并签字确认后的35天内，发包人将最终的合同价格减去累计已支付的金额后的余额支付给承包人，为人民币127987元。', '40', '127987', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (282, '1.64888141257323e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后30个工作日内以银行转账或银行汇票的方式进行支付。', '100', '301634.68', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (283, '1.64888141257323e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (284, '1.64888141251451e18', '合同费用经甲方审核完毕后一次性结算付款（扣留3%质量保证金），乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后30个工作日内以银行转账或银行汇票的方式进行支付。', '97', '1144549.06', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (285, '1.64888141251451e18', '质量保证金（合同结算总额的3%）从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '3', '35398.42', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (286, '1.64888141247676e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '265343', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (287, '1.64888141247676e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (288, '1.64888141242224e18', '合同签订后，乙方提供下列合格单据后56天内，支付一般项目、水库泥沙断面测量、资料整理和测量报告编制及报告评审总费用的30%。', '30', '208350', NULL, '5.3.2安全生产费结算:安全生产费实行预付制。开工前，乙方按合同工作计划并根据合同价格表中的安全生产费拟定投入的安全生产费计划，同时提交安全生产费支付申请函及等额增值税发票，甲方收到支付申请函及等额增值税专用发票后56天内一次性结算。乙方按合同要求完成合同规定的内容后，甲方验收时对安全生产费进行核算，扣回投入不足部分。');
INSERT INTO `cmc_contract_payment` VALUES (289, '1.64888141242224e18', '(2）乙方按合同要求完成合同规定的工作内容、提交测量成果并经甲方验收合格后，乙方提供下列合格单据后56天内，甲方向乙方支付合同剩余金额。乙方申请结算', '70', '486150', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (290, '1.64888141236352e18', '本合同生效后7日内，甲方向乙方支付项目首付款，按项目预算总金额的20 %计', '20', '59267', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (291, '1.64888141236352e18', '完成2021年度总体工作任务后，甲方按2021年度总体工作任务的实际工作量向乙方结算实际合同金额，同时向乙方支付项目进度款；此阶段支付的项目进度款与已支付的项目首付款总和为项目实际合同金额的 80 %', '60', '177801', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (292, '1.64888141236352e18', '项目验收合格后15日内，甲方向乙方支付全部尾款', '20', '59267', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (293, '1.64888141234674e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方审核完毕后一次性结算付款。', '100', '344114.16', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (294, '1.64888141234674e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (295, '1.64888141229641e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后30个工作日内以银行转账或银行汇票的方式进行支付。', '100', '161879.02', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (296, '1.64888141229641e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (297, '1.64888141227124e18', '承包人完成设计报告中间成果', '20', '56160', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (298, '1.64888141227124e18', '承包人完成设计报告送审稿，提交《锦 屏水电站水光互补项目1：500地形图测绘工作成果报告》', '40', '112320', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (299, '1.64888141227124e18', '完成了全部合同工作，最终成果报告经审查验收合格后 的42天（以发包人出具的最终成果验收合格证明的日期起算）内', '40', '112320', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (300, '1.64888141222091e18', '本合同生效后，乙方提交技术服务成果并经甲方验收合格后10个工作日内，甲方向乙方支付合同总价的 60 %', '60', '167280', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (301, '1.64888141222091e18', '乙方按甲方要求对验收合格的技术服务成果进行完善提交后，甲方支付剩余价款', '40', '111520', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (302, '1.64888141220413e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后30个工作日内以银行转账或银行汇票的方式进行支付。', '100', '375002.22', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (303, '1.64888141220413e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (304, '1.6488814121538e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '97', '820577.63', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (305, '1.6488814121538e18', '质量保证金（合同结算总额的3%）从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '3', '25378.69', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (306, '1.64888141212444e18', '本合同在乙方提交工作范围内的所有中间成果资料后，甲方向乙方支付进度款（合同额的80%）', '80', '302400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (307, '1.64888141212444e18', '乙方全部完成任务，提交的相应产品经甲方验收合格，即可办理结算手续，结算款（合同额的20%）', '20', '75600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (308, '1.64888141210766e18', '在承包人主要人员及设备进场后，由承包人提出书面申请并经发包人审核确认后 14 天内，发包人将向承包人支付合同总价（扣除暂列金额）的 10%作为预付款。 ', '10', '385510', NULL, '预付款自本合同第一次进度结算时开始平均扣回，至合同结算金额达合同总价（扣除暂列金额） 80%时全部扣回。');
INSERT INTO `cmc_contract_payment` VALUES (309, '1.64888141210766e18', '本合同进度款按次结算。承包人在完成每次施工控制网复测并正式提交相关资料后 向发包人提出“付款申请书”、完成合同约定主要工作量清单等资料。发包人对“付款申请书”、本标承包人完成主要工作量清单等资料进行审核，审核通过后通知承包人出具增值税专用发票，发包人在收到增值税专用发票后 7 天内支付按合同约定进度款项。', '87', '3353937', NULL, '进度款分期支付，发包人将在每期结算的付款中扣留当期应结算款总额的 3%，作为测量责任保留金； 扣留总额达到合同总价的 3%为止。');
INSERT INTO `cmc_contract_payment` VALUES (310, '1.64888141210766e18', '测量工程项目全部竣工后的 28 天内，发包人将返还测量责任保留金总额的 50%；', '1.5', '57826.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (311, '1.64888141210766e18', '测量工程项目全部竣工结算完成后的 42 天内，发包人将返还剩余测量责任保留金。', '1.5', '57826.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (312, '1.64888141209089e18', '在本合同生效后15日内，甲方按合同价格的30%向乙方支付预付款，需要提供等额增值税专用发票。', '30', '125069.4', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (313, '1.64888141209089e18', '已完成70%的工程量及提供70%及以上的工程量确认单并乙方开具的等额增值税专用发票后30日内，甲方按合同价格的40%向乙方支付进度款。', '40', '166759.2', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (314, '1.64888141209089e18', '完成合同内容工作后，乙方开具的等额增值税专用发票后30日内，甲方支付合同总价30%的项目尾款。', '30', '125069.4', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (315, '1.64888141207411e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后30个工作日内以银行转账或银行汇票的方式进行支付。', '100', '208175', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (316, '1.64888141207411e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (317, '1.64888141205733e18', '（1）合同签订后具备实施条件5个日历天内向乙方预付合同金额的10%预付款', '10', '382000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (318, '1.64888141205733e18', '（2）完成林权数据录入及外业调查，形成矢量图形数据和属性数据，建立全县所有林权不动产登记数据库并汇交后15日历天内支付合同金额的50%', '50', '1910000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (319, '1.64888141205733e18', '（3）项目全面完成验收合格后15日历天内支付合同金额的 37%', '37', '1413400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (320, '1.64888141205733e18', '（4）项目后续服务期一年满后30日历天内支付合同金额的3%；所有款项均不计利息，乙方申请办理服务的费用结算，按甲方支付程序报批，经财政审核后由县财政拨款后向乙方支付；应提供等额合法有效的增值税发票；若乙方在服务过程中存在扣款将直接在每次支付时扣除。', '3', '114600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (321, '1.64888141204056e18', '1、政府采购合同生效并具备实施条件后10个工作日内，甲方向乙方支付合同总金额的10%作为预付款，即315700.00元（大写：叁拾壹万伍仟柒佰元整）。', '10', '315700', '2000-01-01', NULL);
INSERT INTO `cmc_contract_payment` VALUES (322, '1.64888141204056e18', '2、完成林权数据整合建库，提供经测绘主管部门认可的第三方检验检测机构出具的检验合格报告后，30个工作日内甲方向乙方支付合同总额的50%，即1578500.00元（大写：壹佰伍拾柒万捌仟伍佰元整）', '50', '1578500', '2000-01-01', NULL);
INSERT INTO `cmc_contract_payment` VALUES (323, '1.64888141204056e18', '3、通过国、省、市相关汇交验收合格后，并将数据导入仪陇县不动产登记数据库，30个工作日内甲方向乙方支付合同总额的35%，即1104950.00元（大写：壹佰壹拾万零肆仟玖佰伍拾元整）', '35', '1104950', '2000-01-01', NULL);
INSERT INTO `cmc_contract_payment` VALUES (324, '1.64888141204056e18', '4、剩下的5%，即157850.00元（大写：壹拾伍万柒仟捌佰伍拾元整）转为质量保证金，待贰年质保期满后（从第三阶段服务费发票日期时间起算），剩余金额无息支付。', '5', '157850', '2000-01-01', NULL);
INSERT INTO `cmc_contract_payment` VALUES (325, '1.64888141200281e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '381592.44', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (326, '1.64888141200281e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (327, '1.64888141198603e18', '签订合同后，甲方在收到乙方提供等额发票和申请资料的10个工作日内', '50', '405710', '2022-11-12', NULL);
INSERT INTO `cmc_contract_payment` VALUES (328, '1.64888141198603e18', '乙方提交全部成果并通过验收合格后，甲方在收到乙方提供等额发票10个工作日内', '50', '405710', '2022-12-15', NULL);
INSERT INTO `cmc_contract_payment` VALUES (329, '1.64888141194409e18', '合同费用经甲方审核完毕后一次性结算付款', '100', '36262.85', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (330, '1.64888141194409e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (331, '1.64888141192731e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后30个工作日内以银行转账或银行汇票的方式进行支付。', '100', '77586.91', NULL, '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。');
INSERT INTO `cmc_contract_payment` VALUES (332, '1.64888141188537e18', '本合同生效后，乙方提交技术服务成果并经甲方验收合格后10个工作日内，甲方向乙方支付合同总价的 60 %', '60', '69960', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (333, '1.64888141188537e18', '乙方按甲方要求对验收合格的技术服务成果进行完善提交后，甲方支付剩余价款，即人民币46,640.00元', '40', '46640', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (334, '1.64888141184762e18', '乙方按照合同约定向甲方提交最终成果及相关资料并经甲方验收合格后，甲方向乙方支付合同总价的 100%', '100', '128388', NULL, '合同费用经甲方审核完毕后，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后28个工作日内支付。');
INSERT INTO `cmc_contract_payment` VALUES (335, '1.64888141182665e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '117149.29', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (336, '1.64888141182665e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (337, '1.64888141180987e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '284108.83', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (338, '1.64888141180987e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (339, '1.6488814117889e18', '乙方向甲方提交所有合格成果资料，甲方报送重庆市住房和城乡建设委员会入库并在重庆两江新区建设局备案，业主或其委托的第三方机构审核工程量并支付费用给甲方后，甲方向乙方支付结算总费用的90%作为工程费用', '90', '1438200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (340, '1.6488814117889e18', '留取10%作为工程质量保证金，成果资料在相关部门入库和备案之日后一年内，乙方完成的技术服务未出现质量问题，甲方向乙方无息支付工程质量保证金。', '10', '159800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (341, '1.6488814117889e18', '合同签订后10日内，甲方向乙方支付合同预估总金额的30 %作为工程预付款;', '30', '279000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (342, '1.6488814117889e18', '乙方提交所有成果资料，并通过行业行政主管部门的普查成果验收，验收合格后30日，甲方向乙方支付项目结算总费用至85% (该项目为按实结算，在提交成果经验收合格后，甲乙双方对整个项目工作量进行核算，按照单价进行结算) ;', '55', '511500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (343, '1.6488814117889e18', '结算时留取10%作为工程质量保证金，工作成果归档后一年内，乙方完成技术服务，且未出现质量问题，支付工程质量保证金。', '10', '93000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (344, '1.6488814117889e18', '留取5%作为未到款保留金，甲方收取相关工作费用后，甲方向乙方支付未到款保留金。', '5', '46500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (345, '1.64888141177212e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。', '100', '318629.64', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (346, '1.64888141177212e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (347, '1.64888141175115e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (348, '1.64888141175115e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (349, '1.64888141165049e18', '在人员、机具、观测设备进场，完成相关数据的观测，出具报告的条件下15日内（含本数），甲方按合同价格的30%向乙方支付进度款', '30', '284413.8', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (350, '1.64888141165049e18', '项目通过竣工验收且结算完毕，甲方收到乙方开具的合同结算价格的合格发票后30日内（含本数），甲方向乙方支付扣除质量保修金后的剩余结算价款', '67', '635190.82', '2022-10-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (351, '1.64888141165049e18', '最终合同价格的3%作为质量保修金，甲方将在保修期结束、保修证书签发、项目无质量事故、无人身伤亡事故、全部项目档案和资料移交后28日内（含本数）向乙方支付质量保修金的剩余部分。', '3', '28441.38', '2023-11-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (352, '1.64888141158757e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '369836.12', '2023-06-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (353, '1.64888141158757e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (354, '1.6488814115624e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '353338.7', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (355, '1.6488814115624e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (356, '1.64888141149949e18', '本合同履行过程中，依据乙方的申请，经甲方审核无误且收到上游公司付款后，按照以下约定进行价款支付', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (357, '1.64888141149949e18', '乙方完成合同约定测绘工作并提交全部测绘成果，经甲方验收合格后，甲方向乙方支付本合同总金额的50%', '50', '713780.26', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (358, '1.64888141149949e18', '本项目完成规划成果送审后，甲方向乙方支付本合同总金额的50%。', '50', '713780.26', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (359, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', NULL, NULL, NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (360, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (361, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '813869.7', NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (362, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (363, '1.64888141149949e18', '乙方完成界桩布置设计工作后，甲方向乙方支付合同款价的20%', '20', '81980', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (364, '1.64888141149949e18', '乙方完成界桩测设制作工作后，经甲方现场核实并签字确认后，乙方向甲方提出支付申请，甲方收到乙方支付申请后15天内向乙方支付合同价款的40%', '40', '163960', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (365, '1.64888141149949e18', '乙方提供全部最终成果并通过甲方组织的验收后，乙方向甲方提出支付申请，甲方收到乙方支付申请后15天内向乙方支付合同价款的40%', '40', '163960', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (366, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '365289.78', NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (367, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (368, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '257459.63', NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (369, '1.64888141149949e18', '质量保证金（合同结算总额的3%）从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (370, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '400001.2', NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (371, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (372, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '55940', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (373, '1.64888141149949e18', '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (374, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (375, '1.64888141149949e18', '本项目在收到乙方提交的最终成果并经甲方验收合格后一次性支付。', '100', '102000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (376, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '31760', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (377, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (378, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '125581.38', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (379, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (380, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '252957.55', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (381, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (382, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '257702.4', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (383, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (384, '1.64888141149949e18', '合同签订并完成全部外业工作后，乙方向甲方提出支付申请，甲方接到乙方支付申请后30天内向乙方支付合同总费用的40%。', '40', '1560002.47', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (385, '1.64888141149949e18', '外业工作完成并提交初步成果后，乙方向甲方提出支付申请，甲方接到乙方支付申请后30天内向乙方支付合同总费用的30%。', '30', '1170001.85', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (386, '1.64888141149949e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。', '27', '1053001.67', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (387, '1.64888141149949e18', '本合同暂扣合同总费用3%作为质量保证金，测绘成果验收后，无质量问题，半年后无息全额返还。', '3', '117000.19', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (388, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '170689.04', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (389, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (390, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '96099.6', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (391, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (392, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '152830.16', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (393, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (394, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '97', '1038083.88', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (395, '1.64888141149949e18', '本合同暂扣合同总费用3%作为质量保证金，测绘成果验收后，无质量问题，半年后无息全额返还。', '3', '32105.69', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (396, '1.64888141149949e18', '第一次合同款支付在承包人完成设计报告中间成果，提交《乡城县正斗场址100万千瓦光伏项目地形图测绘工作中间成果》经发包人认可，并在收到承包人出具的相应金额的增值税发票后的28天内，发包人支付给承包人的金额为签约合同价格的20%', '20', '59840', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (397, '1.64888141149949e18', ' 第二次合同款支付在承包人完成设计报告送审稿，提交《乡城县正斗场址100万千瓦光伏项目地形图测绘工作成果报告》经发包人认可，并在收到承包人出具的相应金额的增值税发票后的28天内，发包人支付给承包人的金额为签约合同价格的40%', '40', '119680', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (398, '1.64888141149949e18', '在承包人完成了全部合同工作，最终成果报告经审查验收合格后的42天（以发包人出具的最终成果验收合格证明的日期起算）内，发包人与承包人应办理合同最终结算手续。双方就最终结算没有异议并签字确认后的35天内，发包人将最终的合同价格减去累计已支付的金额后的余额支付给承包人，为人民币91680.00元', '40', '119680', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (399, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '141096.6', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (400, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (401, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '75047.66', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (402, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (403, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '132049.88', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (404, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (405, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '319696.78', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (406, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (407, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '54972', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (408, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (409, '1.64888141149949e18', '本补充协议工作完成后，乙方提交成果报告，经甲方验收合格后，一次性办理结算。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (410, '1.64888141149949e18', '本补充协议不设质量保证金，若出现质量问题，乙方负责后续处理。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (411, '1.64888141149949e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '64298.75', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (412, '1.64888141149949e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (413, '1.64888141145755e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '340763.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (414, '1.64888141145755e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (415, '1.64888141137366e18', '承包人完成第一年度工作和提交阶段验收资料，并经发包人验收合格后，发包人支付合同总价款的50%给承包人。', '50', '148160', NULL, '详见合同第4.35计量与支付');
INSERT INTO `cmc_contract_payment` VALUES (416, '1.64888141137366e18', '承包人完成第二年度工作和提交竣工验收资料并归档，并经发包人审查和验收合格后，发包人将剩余合同价款支付给承包人。', '50', '148160', NULL, '详见合同第4.35计量与支付');
INSERT INTO `cmc_contract_payment` VALUES (417, '1.64888141133172e18', '安全生产费结算：按年结算。', NULL, NULL, NULL, '在项目开工后，由承包人申请安全生产费，发包人在收到承包人合格申请资料56天内，向承包人结算安全生产费的25%（当年12个月安全生产费用），主要用于承包人安全生产的各项准备工作及安全投入。每年初（合同年）支付当年（不足整年12月，支付剩余月份的）安全生产费；同时在投标报价限额内审核上一年度（第一次不用审核）安全生产费使用情况，对未足额投入使用的安全生产费予以扣除。年度支付时提交本年度安全生产费投入计划清单（首次支付时承包人应提供履约保证金证明材料）。');
INSERT INTO `cmc_contract_payment` VALUES (418, '1.64888141133172e18', '一般项目、大坝外部变形观测、金龙山及霸王山监测、水库水温观测及资料整编分析总价承包，每季度结算支付一次。', NULL, NULL, NULL, '每季度承包人完成合同约定的工作内容并经发包人验收合格后（可与测量服务一并验收），承包人提供下列合格单据后56天内，发包人向承包人结算本季度一般项目、大坝外部变形观测、金龙山及霸王山监测、水库水温观测及资料整编分析费用的6%（未发生或取消的总价项目，发包人有权扣除或部分扣除）。最后一次剩余未结算部分在承包人完成全部工作内容并经发包人竣工验收合格后，承包人提供下列合格单据后56天内，发包人一次性结清。');
INSERT INTO `cmc_contract_payment` VALUES (419, '1.64888141125203e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '160039.71', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (420, '1.64888141125203e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (421, '1.64888141123525e18', '本合同签订生效，乙方工作人员进场10日内并提供工作方案后，乙方向甲方提出支付申请，甲方接到乙方支付申请后15天内向乙方支付合同总费用的15%', '15', '1291500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (422, '1.64888141123525e18', '乙方提供实物指标土地、零星树木及相关附属设施调查的初步成果资料，经甲方认可后，乙方向甲方提出支付申请，甲方接到乙方支付申请后15天内向乙方支付合同总费用的55%', '55', '4735500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (423, '1.64888141123525e18', '乙方提供经公示、确认后的实物指标土地、零星树木及相关附属设施调查成果，甲方接到乙方支付申请后15天内向乙方支付合同总费用的20%', '20', '1722000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (424, '1.64888141123525e18', '乙方提供实物指标土地、零星树木及相关附属设施调查的最终成果资料并通过验收及移交，甲方接到乙方支付申请后15天内向乙方支付合同总费用的10%', '10', '861000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (425, '1.64888141121847e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '51740.84', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (426, '1.64888141121847e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (427, '1.64888141120169e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '368064.65', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (428, '1.64888141120169e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (429, '1.64888141115975e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。', '100', '79000', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_payment` VALUES (430, '1.64888141115975e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (431, '1.64888141115975e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (432, '1.64888141113878e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '340037.4', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (433, '1.64888141113878e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (434, '1.64888141113878e18', '合同签订并完成全部外业工作后，乙方向甲方提出支付申请，甲方接到乙方支付申请后30天内向乙方支付合同总费用的40%。', '40', '174768.05', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (435, '1.64888141113878e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。', '60', '262152.08', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (436, '1.64888141113878e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '392518.85', NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (437, '1.64888141113878e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (438, '1.648881411122e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '248870.62', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (439, '1.648881411122e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (440, '1.64888141110523e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '229838.25', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (441, '1.64888141110523e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (442, '1.64888141106748e18', '完成控制测量、高程引测和198条断面监测设施建设及第一次大断面测量，提交了相关的成果和报告，测量成果通过甲方审核。', '75', '1348612.5', NULL, '75%增值税专用发票');
INSERT INTO `cmc_contract_payment` VALUES (443, '1.64888141106748e18', '完成第二次大断面测量，提交了相关的成果报告，测量成果通过甲方审核。', '20', '359630', NULL, '25%增值税专用发票');
INSERT INTO `cmc_contract_payment` VALUES (444, '1.64888141106748e18', '所有测量成果和报告移交后的一年内，测绘产品经甲方和相关单位使用未发现严重质量问题。', '5', '89907.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (445, '1.6488814110507e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '231579.81', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (446, '1.6488814110507e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (447, '1.64888141100037e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '188604.53', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (448, '1.64888141100037e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (449, '1.6488814109975e18', '合同签订完成进场后，一个月内，支付合同金额的30%', '30', '74400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (450, '1.6488814109975e18', '完成青川县重点区域自然资源权属调查（大熊猫国家公园）全部内外业工作，支付合同金额的30%', '30', '74400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (451, '1.6488814109975e18', '完成青川县重点区域自然资源权属调查（大熊猫国家公园）项目工作，通过市、省验收，向国家提交数据后，支付合同金额的35%', '35', '86800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (452, '1.6488814109975e18', '预留 5%结算价款作为质保金，在项目完成最终汇交之日起 2 年后的第一月内支付，均不计利息。', '5', '12400', '2022-06-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (453, '1.64888141099713e18', '乙方向甲方提交全部成果资料后，甲方按合同总价支付（即支付至100%）。', '100', '25860', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (454, '1.64888141099096e18', '合同签订后15个工作日支付合同总额的30%', '30', '106500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (455, '1.64888141099096e18', '提交成果后15个工作日支付合同总额的60%', '60', '213000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (456, '1.64888141099096e18', '竣工验收合格结算后5个工作日支付合同总额的10%', '10', '35500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (457, '1.64888141098942e18', '合同签订后，乙方人员设备进场后支付合同额的【 10 】%作为预付款，预付款需进行计量；', '10', '6597', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (458, '1.64888141098942e18', '乙方完成全部工作，经检验合格后甲乙双方根据实际完成工作量进行结算，乙方申请支付金额不超过结算金额的【 90 】%；', '90', '59373', NULL, '（4）其中结算总金额的【 3 】%为质量保证金，待项目获得相应批复后，乙方不存在违约、无责任事故，甲方支付合同总价尾款和质量保证金。');
INSERT INTO `cmc_contract_payment` VALUES (459, '1.64888141098864e18', '由甲方核对乙方每三个月实际发生的工作量（以出具正式盖章的测绘报告书的全额结算，出具初稿报告的按90%结算）并经甲方确认后，甲方在十五个工作日内向乙方支付相关费用。', NULL, NULL, NULL, '本项目为单价承包合同。单价按合同第一条的单价约定计。');
INSERT INTO `cmc_contract_payment` VALUES (460, '1.64888141098532e18', '合同款金额一次性支付，本合同生效后，乙方提交技术服务成果 和结算报告并经甲方验收合格后10个工作日内，乙方提交相应增值 税专用发票后一次性支付', '100', '103032', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (461, '1.64888141098491e18', '本合同签订后10日内', '30', '90164', '2020-04-30', '第一次付费：本合同签订后10日内，承包人向发包人提出支付合同总价的30%的申请，即申请支付人民币90164.00元（大写：玖万零壹佰陆拾肆元整）。');
INSERT INTO `cmc_contract_payment` VALUES (462, '1.64888141098491e18', '承包人完成全部测绘成果且通过审核后10日内', '65', '195354', '2020-05-18', '第二次付费：承包人完成全部测绘成果且通过审核后10日内，承包人向发包人提出支付合同总价的65%的申请，即申请支付人民币195354.00元（大写：壹拾玖万伍仟叁佰伍拾肆元整）。');
INSERT INTO `cmc_contract_payment` VALUES (463, '1.64888141098491e18', '项目完工验收完成后10日内', '5', '15027', '2020-05-29', '第三次付费：项目完工验收完成后10日内，承包人向发包人提出支付合同总价的5%的申请，即支付人民币15027.00元（大写：壹万伍仟零贰拾柒元整）。');
INSERT INTO `cmc_contract_payment` VALUES (464, '1.6488814109835e18', '合同签订后,中标单位完成80%工作量后，采购方支付合同额30%。', '30', '396000', '2020-08-01', NULL);
INSERT INTO `cmc_contract_payment` VALUES (465, '1.6488814109835e18', '完成100%工作量后支付合同额50%的进度款', '50', '660000', '2020-08-14', NULL);
INSERT INTO `cmc_contract_payment` VALUES (466, '1.6488814109835e18', '剩余20%工程款根据《大方县农村集体建设用地、宅基地使用权及房屋所有权确权登记工作实施方案》要求，在提交完整成果资料，经验收合格后，一年内付清。', '20', '264000', '2021-05-25', NULL);
INSERT INTO `cmc_contract_payment` VALUES (467, '1.64888141098029e18', '本合同项目完工后，在甲方向业主办理完毕工程结算手续后 14 日内向乙方办理 工程价款结算。', '100', '671900', NULL, '本合同工程甲方不提供预付款。');
INSERT INTO `cmc_contract_payment` VALUES (468, '1.6488814109794e18', '乙方出具合格经甲方确认的正式成果后15个工作日内支付全部测绘费用。', '100', '189000', NULL, '甲方付款前，乙方应向甲方提供合法正式、符合甲方要求的发票（税率6%），乙方延期提供发票的，甲方付款期相应顺延，若乙方未提供发票的，甲方有权暂停支付相应款项，且不承担任何责任，乙方亦不得因此停止履行本合同约定的义务。');
INSERT INTO `cmc_contract_payment` VALUES (469, '1.64888141097526e18', '协议签订后，乙方按国家规范、行业标准及甲方要求开展工作。乙方完成相应工作且通过验收后，甲方根据业主方付款同比例支付给乙方相应项目费用。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (470, '1.64888141097412e18', '本合同在乙方提交经甲方认定合格的资用图后，甲方向乙方支付进度款，计合同额的60%', '60', '58176.6', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (471, '1.64888141097412e18', '乙方完成合同约定的全部测绘工作，提交地形图等所有相关技术文档经甲方验收合格，即可办理结算手续，结算款，计合同额的40%', '40', '38784.4', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (472, '1.64888141097234e18', '合同签订后，乙方划界工作完成后，甲方一次性支付乙方全部工作费用，计33400.00元', '100', '33400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (473, '1.64888141097198e18', '1、乙方进场开展工作后，甲方在政府采购合同签订生效后20个工作日内，向乙方支付合同金额的30%；', '30', '814800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (474, '1.64888141097198e18', '乙方完成所有外业调查、复核，将存量登记数据逐一完成矢量化、落宗，甲方向乙方支付合同金额的20%；', '20', '543200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (475, '1.64888141097198e18', '乙方完成林权数据整合建库和档案整理，达到不动产登记成果要求及数据库整合建库标准，且通过县级主管部门的验收，甲方向乙方支付合同金额的30%；', '30', '814800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (476, '1.64888141097198e18', '项目通过州级主管部门的汇交入库及验收后20个工作日内，支付合同金额的10%。', '10', '271600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (477, '1.64888141097198e18', '项目通过省、部级主管部门的汇交入库及验收后20个工作日内，支付合同金额的10%。', '10', '271600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (478, '1.64888141097047e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '163700', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (479, '1.64888141097047e18', '本合同不扣减质量保证金（承包人承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (480, '1.64888141097036e18', '本合同在乙方提交工作范围内的所有中间成果资料后，甲方向乙方支付进度款（合同额的80%）', '80', '760000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (481, '1.64888141097036e18', '乙方全部完成任务，提交的相应产品经甲方验收合格，即可办理结算手续。合同结算款的支付应扣减已拨付进度款外，还应扣减因按“乙方违约”条款的约定应扣减的工作量或违约金，在1月内将余款支付给乙方，结算款（合同额的20%）', '20', '190000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (482, '1.64888141097022e18', '费用支付方式按照实际测绘分项产生的费用进行支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (483, '1.64888141097022e18', '按照本合同约定，在乙方交付每分项测绘成果时一次性足额支付该分项测绘服务费用。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (484, '1.64888141096311e18', '合同签订后7个工作日支付30%的预付款（支付至合同总金额的30%）。', '30', '2355000', '2020-09-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (485, '1.64888141096311e18', '提交初步成果和批复文件7个工作日后支付合同金额的30%（支付至合同总金额的60%）。', '30', '2355000', '2020-11-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (486, '1.64888141096311e18', '成果文件验收合格后7个工作日后支付合同金额的40%（支付至合同总金额的100%）。', '40', '3140000', '2020-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (487, '1.64888141096263e18', '合同签订后15个工作日内支付合同总金额的30%', '30', '2169000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (488, '1.64888141096263e18', '完成外业测绘及内业作业并通过项目技术审查后15个工作日内支付合同总金额的40%', '40', '2892000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (489, '1.64888141096263e18', '项目总体经甲方书面确认验收合格后15个工作日内支付合同剩余款项', '30', '2169000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (490, '1.64888141096262e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '370861.88', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (491, '1.64888141096262e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (492, '1.64888141096059e18', '双方合同签订后，甲方支付合同总费用的30%', '30', '54600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (493, '1.64888141096059e18', '乙方完成所有监测外业工作并提交中间成果后，甲方支付合同总费用的50%', '50', '91000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (494, '1.64888141096059e18', '乙方完成所有工作并提交正式成果后，甲方在收到乙方交成果后并核实成果后支付合同总费用的20%', '20', '36400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (495, '1.64888141096059e18', '乙方须向甲方出具相应合法有效的测绘技术服务增值税发票，甲方在收到发票后15日内支付给乙方相应费用。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (496, '1.64888141095293e18', '第一次在乙方提交《研究》大纲，并获得甲方认可后，且四川省地质矿产勘查开发局物探队第一期经费到达甲方账户，甲方向乙方支付人民币17.28万元（大写：壹拾柒万贰仟捌佰元整）。', '40', '172800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (497, '1.64888141095293e18', '第二次在乙方提交《研究》初稿，并获得甲方认可，且四川省地质矿产勘查开发局物探队支付给甲方的第二期规划费到达甲方账户后，甲方向乙方支付人民币17.28万元（大写：壹拾柒万贰仟捌佰元整）。', '40', '172800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (498, '1.64888141095293e18', '第三次在乙方提交《研究》成果稿，并获得甲方认可，且四川省地质矿产勘查开发局物探队将履约保证金退还甲方后，甲方向乙方支付人民币8.64万元（大写：捌万陆仟肆佰元整）。', '20', '86400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (499, '1.64888141094803e18', '本合同签订后，根据乙方实际完成的工作量，每半年进行一次验工计价和拨款', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (500, '1.64888141094584e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '1445099.48', '2023-10-31', '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (501, '1.64888141094584e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (502, '1.64888141094478e18', '第一次合同款支付在乙方完成勘察中间成果，提交中间成果报告经甲方认可，并在收到乙方出具的相应金额的增值税发票后的28天内，甲方支付给乙方的金额为签约合同价格的30%。', '30', '405000', NULL, '甲方付款满足“以收定支原则”，在收到业主相应款项后再对乙方支付。');
INSERT INTO `cmc_contract_payment` VALUES (503, '1.64888141094478e18', '第二次合同款支付在乙方完成勘察最终成果，并提交最终成果报告经甲方认可，并在收到乙方出具的相应金额的增值税发票后的28天内，甲方支付给乙方的金额为签约合同价格的40%。', '40', '540000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (504, '1.64888141094478e18', '在乙方完成了全部合同工作，最终成果经审查验收合格后的42天（以甲方出具的最终成果验收合格证明的日期起算）内，甲方与乙方应办理合同最终结算手续。双方就最终结算没有异议并签字确认后的35天内，甲方将最终的合同价格减去累计已支付的金额后的余额支付给乙方。', '30', '405000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (505, '1.64888141094437e18', '结算计量以实际发生并经甲方签订认可的合格工程量为准。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (506, '1.64888141094437e18', '乙方自愿与甲方共同承担业主付款的风险，合同履行过程中，由乙方进行垫资，并免收相应的垫资利息。甲方收到业主的付款后按本合同的约定向乙方付款，业主延迟付款的，甲方支付款项的时间相应顺延，且无需向乙方承担任何责任。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (507, '1.64888141094437e18', '工程款在乙方完成合同规定的工作内容且经甲方验收合格后分批结算。各批次结算工程量与甲方收到业主对应工程量到款比例一致。结算时乙方应按甲方要求提交甲方书面认可的工程量确认单、付款申请、甲方书面认可的成果资料(包含原始资料、技术总结报告纸质资料、电子版各一份)以及甲方规定的其他相关资料。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (508, '1.64888141094437e18', '结算时，乙方应向甲方提交甲方认可的等额增值税专用发票，否则，甲方有权拒绝支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (509, '1.6488814109429e18', '经甲方组织评审认可后支付总价30%；', '30', '959400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (510, '1.6488814109429e18', '测量工作完成，经甲方组织评审认可后支付总价30%；', '30', '959400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (511, '1.6488814109429e18', '合同约定的服务内容全部完成后，经甲方组织验收合格后支付合同总价的40%。', '40', '1279200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (512, '1.64888141094259e18', '项目服务费用由甲方一次性支付给乙方。', '100', '67000', NULL, '具体支付条件和时间如下：乙方完成合同约定的全部服务工作，通过自评自验，并凭完整的台账资料、项目实施总结、正规发票、协议原件等请款资料给甲方。经甲方审核通过后20个工作日内将合同约定的服务总金额即人民币陆万柒千元整（67000.00元）支付给乙方。');
INSERT INTO `cmc_contract_payment` VALUES (513, '1.6488814109421e18', '合同签订后甲方收到乙方发票30个工作日内，甲方向乙方支付预算金额的25%', '25', '500000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (514, '1.6488814109421e18', '2021年11月底前，甲方向乙方支付第一次进度款。第一次进度款=（全野外探测单价×全野外探测实际提交长度+内外业结合核实探测单价×内外业结合核实探测实际提交长度）×40%-首付款，若第一次进度款计算值为零或负数，则不支付。', '15', '300000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (515, '1.6488814109421e18', '乙方将管线普查成果全部提交完毕并经测绘成果质量检验机构检验合格后，于15个工作日内甲方向乙方支付第二次进度款。第二次进度款=（全野外探测单价×全野外探测实际提交长度+内外业结合核实探测单价×内外业结合核实探测实际提交长度）×80%-首付款-第一次进度款，若第二次进度款计算为零或负数，则不支付。', '40', '800000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (516, '1.6488814109421e18', '全部普查成果完成整合检查、汇交入库，且项目通过验收后甲方收到乙方发票60个工作日内甲方向乙方支付尾款。尾款=合同总金额-首付款-第一次进度款-第二次进度款。', '20', '400000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (517, '1.64888141093496e18', '乙方按照合同约定向甲方提交最终成果及相关资料并经甲方验收合格后，甲方向乙方支付合同总价的100%', '100', '90000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (518, '1.64888141093329e18', '甲方收到乙方移交的正式行政批复原件及所有报建过程材料后28天内，乙方提交付款申请、按甲方制度办理结算、提供等额增值税专用发票，甲方一次性支付100%价款给乙方。', '100', '366000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (519, '1.64888141092963e18', '乙方进场开展工作后，甲方即向乙方支付暂定合同总价款的15%作为预付款', '15', '200167.95', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (520, '1.64888141092963e18', '乙方提交完全部测绘成果后，甲方认可乙方提交的测绘成果之后，向乙方支付暂定总价款的 70%', '70', '934117.1', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (521, '1.64888141092963e18', '乙方提交完全部测绘成果并经甲方验收通过后，甲方即向乙方支付实际工作量总价款的余额。', '15', NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (522, '1.64888141092906e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '207763.39', NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (523, '1.64888141092906e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (524, '1.64888141092452e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '80100', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (525, '1.64888141092384e18', '合同签订后20日内，采购人向成交供应商支付合同金额的20%作为预付款；', '20', '169600', NULL, '第七条  履约保证金1.乙方开具人民币42400.00元保函作为本合同的履约保证金。2.履约保证金作为违约金的一部分及用于补偿甲方因乙方不能履行合同义务而蒙受的损失。');
INSERT INTO `cmc_contract_payment` VALUES (526, '1.64888141092384e18', '成交人完成项目勘界定标工作并经采购人初验通过后20日内，采购人向成交供应商支付合同金额的40%；', '40', '339200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (527, '1.64888141092384e18', '成交人工作成果通过评估验收并交付正式成果资料后，采购人向成交供应商支付合同金额的40%；', '40', '339200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (528, '1.64888141092384e18', '成交供应商须向采购人出具合法有效完整的发票及凭证资料进行支付结算。', '10', '84800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (529, '1.64888141092128e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方审核完毕后一次性结算付款。', '100', '64700', NULL, '质量保证金（总金额的3%）从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。');
INSERT INTO `cmc_contract_payment` VALUES (530, '1.64888141091456e18', '合同签订后甲方在15个工作日内支付50%费用，即 &yen; 300000.00元（大写：叁拾万元整）给乙方开展相关工作。', '50', '300000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (531, '1.64888141091456e18', '乳源瑶族自治县2022年度国土变更调查成果通过甲方验收以后，甲方于15个工作日内支付剩余50%费用', '50', '300000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (532, '1.64888141091229e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '96444.23', NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (533, '1.64888141091229e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (534, '1.64888141091134e18', '支付方式：本工程无预付款，工程进度款按季度经甲方组织人员对乙方实际投入的人工及完成的工程量、质量、进度等检查、验收并签字确认后，按实际发生的工程量向乙方支付工程进度款，且应与主合同收款相匹配。', NULL, NULL, NULL, '乙方提供符合我公司财务要求的正规发票（税率为9%的增值税专用发票）');
INSERT INTO `cmc_contract_payment` VALUES (535, '1.64888141091134e18', '质量保证金按结算合同经费的3%在最后一期结算时暂扣，若无质量问题，在完工半年后支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (536, '1.64888141091008e18', '在双方签订合同后，甲方支付40%的进度款给乙方作为项目启动资金，用于乙方现场埋设沉降监测点、监测设备采购、安全生产防护设施的投入。', '40', '23679.41', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (537, '1.64888141091008e18', '在执行第4次观测后，乙方提交4次监测成果报告（第4期），甲方在接受监测报告并通过验收后的30日内支付合同金额30%的合同款', '30', '17759.56', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (538, '1.64888141091008e18', '全部观测合同结束后，乙方提交全部监测成果报告（8期），甲方在接受监测报告并通过验收后的30日内支付剩余合同金额30%的合同款', '30', '17759.56', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (539, '1.64888141090958e18', '在乙方的测绘成果提交湖北省测绘质量监督检验站全部验收合格后交付甲方，甲方按市财政资金拨付进度予以支付，乙方应事先开具正式的税务发票提交给甲方。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (540, '1.64888141090809e18', '项目完成后由乙方开具正式发票，甲方收到发票后15个工作日内通过转账方式向乙方一次性支付全部费用', '100', '57000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (541, '1.64888141090627e18', '合同签订后，甲方15日内支付预付款100000元', NULL, '100000', '2020-09-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (542, '1.64888141090627e18', '合同签订后，甲方15日内支付预付款100000元，大写：拾万元整（人民币），项目完成后并通过评估后按实际测量数量支付余下款项。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (543, '1.64888141090627e18', '以后每次项目开始后15日内支付预付款100000元，并在项目完成并通过评估后按实际数量支付本次余下的所有款项。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (544, '1.64888141090603e18', '第一次合同款支付在承包人完成设计报告中间成果，提交《奔戈光伏发电项目地形图测绘工作中间成果》经发包人认可，并在收到承包人出具的相应金额的增值税发票后的28天内，发包人支付给承包人的金额为签约合同价格的20%，为人民币88278.80元（大写：捌万捌仟贰佰柒拾捌元捌角整）。', '20', '88278.8', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (545, '1.64888141090603e18', '第二次合同款支付在承包人完成设计报告送审稿，提交《奔戈光伏发电项目地形图测绘工作成果报告》经发包人认可，并在收到承包人出具的相应金额的增值税发票后的28天内，发包人支付给承包人的金额为签约合同价格的40%，为人民币176557.60元（大写：壹拾柒万陆仟伍佰伍拾柒元陆角整）。', '40', '176557.6', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (546, '1.64888141090603e18', '在承包人完成了全部合同工作，最终成果报告经审查验收合格后的42天（以发包人出具的最终成果验收合格证明的日期起算）内，发包人与承包人应办理合同最终结算手续。双方就最终结算没有异议并签字确认后的35天内，发包人将最终的合同价格减去累计已支付的金额后的余额支付给承包人，为人民币176557.60元（大写：壹拾柒万陆仟伍佰伍拾柒元陆角整）。', '40', '176557.6', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (547, '1.64888141090326e18', '提交合格的测绘资料成果后，乙方提供甲方认可的支付申请及增值税专业发票等合格支付凭证后30个工作日内，支付至合同价款的80%', '80', '80000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (548, '1.64888141090326e18', '工程完工验收合格后，乙方提供甲方认可的支付申请及增值税专业发票等合格支付凭证后30个工作日内，支付至合同价款的100%。', '20', '20000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (549, '1.64888141089843e18', '签合同后，在乙方完成JX水电站林地征占审查审批所有行政批复，甲方收到乙方提交的正式行政批复原件及所有报建过程材料后28天内，乙方提交付款申请、按甲方制度办理结算、提供等额增值税专用发票，甲方一次性支付100%价款给乙方。', '100', '365000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (550, '1.64888141089289e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '92300', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (551, '1.64888141089289e18', '本合同不扣减质量保证金（承包人承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (552, '1.64888141089041e18', '乙方提交成果，经甲方及两江新区建设管理局验收合格后25个工作日内，且乙方提供足额有效增值税发票，甲方一次性支付给乙方。', '100', '453900', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (553, '1.64888141088785e18', '。本合同约定，合同签订后不预付经费，按季度项目结束经甲方按照本合同1.5条、1.12条确认后，进行结算。', NULL, NULL, NULL, '详见合同第三条第三章合同经费与支付方式。');
INSERT INTO `cmc_contract_payment` VALUES (554, '1.6488814108872e18', '本项目采用一次性付款，乙方完成各阶段测绘工作并提交相关成果资料（成果资料交接单）并经甲方项目负责人签字和盖章确认后，可申请支付本合同全部款项的100%费用。', '100', '89268.38', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (555, '1.64888141088392e18', '按照本合同约定，在乙方交付测绘成果时按总价支付测绘服务费用80%', '80', '74815.85', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (556, '1.64888141088392e18', '在提交资料到仪陇县不动产中心并由不动产中心确认资料无误后支付测绘服务费用20%', '20', '18703.96', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (557, '1.64888141088314e18', '本合同采用一次性支付，即乙方提交全部成果后，甲方在收到乙方提供等额发票10个工作日内，支付合同全部款项，即人民币38000.00元（人民币：叁万捌仟元整）。', '100', '38000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (558, '1.64888141087948e18', '完成所有检查、检测内容并提交完工资料及成果报告，且成果报告通过委托人验收。', '100', '438508', '2020-05-29', '经委托人审核合格后30 天内向受托人支付合同结算总价的100%。');
INSERT INTO `cmc_contract_payment` VALUES (559, '1.64888141087873e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', NULL, NULL, NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (560, '1.64888141087873e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (561, '1.64888141087728e18', '双方在签订本合同后的10个工作日内，甲方向乙方支付首期检验经费50%', '50', '174356.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (562, '1.64888141087728e18', '满足以下a，b任何一个条件时，甲方向乙方支付余下检验经费50%', '50', '174356.5', NULL, 'a: 自合同生效日起，甲方收到检验目标项目涉及到的最近一笔业主方（简称：简阳市农业局）进度款、履约保证金等相关费用之日起，10日内支付尾款全款；b：若甲方未收到业主方（简称：简阳市农业局）进度款、履约保证金等相关费用，则签订合同之日起180日内支付尾款全款;');
INSERT INTO `cmc_contract_payment` VALUES (563, '1.64888141087133e18', '乙方向甲方提交中间成果报告后，甲方向乙方支付合同总价的50%', '50', '91750', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (564, '1.64888141087133e18', '本项目最终成果报告经甲方验收合格后，甲方向乙方支付合同总价的40%', '40', '73400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (565, '1.64888141087133e18', '本项目施工完工后，甲方向乙方支付合同总价的10%', '10', '18350', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (566, '1.64888141086664e18', '乙方应在提交项目成果经甲方验收合格后十天内向甲方提供税率为6%的全额增值税专用发票，甲方在收到乙方提供的发票后45日内完成全额付款 。', '100', '333953', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (567, '1.64888141086288e18', '技术服务报酬由甲方分期（一次或分期）支付乙方。具体支付方式和时间如下：乙方完成本批次相关工作，经甲方业主验收合格且甲方收到业主该笔款项后，收到乙方开具的本批次合同结算价100%合格增值税专用发票、付款申请后30日内（含本数），甲方向乙方支付本批次合同结算价的100%.', NULL, NULL, NULL, '详见合同第5条。');
INSERT INTO `cmc_contract_payment` VALUES (568, '1.64888141086198e18', '签订合同后，完成资料收集、整理、现场工作地图制作，并制定了项目实施方案后，支付合同金额的35%', '35', '521500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (569, '1.64888141086198e18', '完成所有项目外业调查，将调查成果矢量化，形成完善的成果图件后，支付合同金额的35%', '35', '521500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (570, '1.64888141086198e18', '完成数据库建设，并通过甲方（县级主管部门）及州级主管部门的验收后支付合同金额的20%', '20', '298000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (571, '1.64888141086198e18', '项目通过省级及相关主管部门的整体验收后支付合同金额的10%', '10', '149000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (572, '1.64888141086158e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '32368.44', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (573, '1.64888141086158e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (574, '1.64888141086081e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方审核完毕后一次性结算付款。', '100', '40500', '2021-03-31', '本合同不扣减质量保证金');
INSERT INTO `cmc_contract_payment` VALUES (575, '1.64888141085546e18', '合同签订后15个工作日内，甲方向乙方支付预算金额的 10 %作为首付款。', '10', '881748', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (576, '1.64888141085546e18', '2021年11月底前，甲方向乙方支付第一次进度款。第一次进度款=（全野外探测单价×全野外探测实际提交长度+内外业结合核实探测单价×内外业结合核实探测实际提交长度）×40%，且不超过本包件合同价的20%。', NULL, NULL, NULL, '第一次进度款中实际提交长度为经监理单位检查合格的管线长度。');
INSERT INTO `cmc_contract_payment` VALUES (577, '1.64888141085546e18', '乙方将管线普查成果全部提交完毕并经测绘成果质量检验机构检验合格后，甲方于15个工作日内向乙方支付第二次进度款。第二次进度款=（全野外探测单价×全野外探测实际提交长度+内外业结合核实探测单价×内外业结合核实探测实际提交长度）×80%-首付款-第一次进度款，若第二次进度款计算为零或负，则不支付。', NULL, NULL, NULL, '第二次进度款中实际提交长度为经质量检验合格后的管线长度。');
INSERT INTO `cmc_contract_payment` VALUES (578, '1.64888141085546e18', '全部普查成果完成整合检查、汇交入库，且项目通过验收后60个工作日内甲方向乙方支付尾款。尾款=合同总金额-首付款-第一次进度款-第二次进度款。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (579, '1.64888141085128e18', '乙方完成外业测量工作，提交《华电凉山盐源牦牛山风电场工程地形图测绘工作中间成果》经甲方认可，并在收到乙方出具的相应金额的增值税发票后的28天内，甲方支付给乙方的金额为签约合同价格的40%', '40', '252760', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (580, '1.64888141085128e18', '乙方完成全部测绘工作，提交《华电凉山盐源牦牛山风电场工程地形图测绘工作成果报告》经甲方认可，并在收到乙方出具的相应金额的增值税发票后的28天内，甲方支付给乙方的金额为签约合同价格的40%', '40', '252760', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (581, '1.64888141085128e18', '在乙方完成了全部合同工作，最终测绘成果报告经审查验收合格后的42天（以甲方出具的最终成果验收合格证明的日期起算，甲方需在乙方提交最终测绘成果报告15天内出具验收合格证明）内，甲方与乙方应办理合同最终结算手续。双方就最终结算没有异议并签字确认后的35天内，甲方支付给乙方的金额为签约合同价格的20%', '20', '126380', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (582, '1.64888141084937e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', NULL, NULL, NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (583, '1.64888141084937e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (584, '1.64888141084312e18', '在乙方完成JX水电站土地报建审查审批所有行政批复，甲方收到乙方提交的正式行政批复原件及所有报建过程材料后28天内，乙方提交付款申请、按甲方制度办理结算、提供等额增值税专用发票，甲方一次性支付100%价款给乙方。', '100', '395000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (585, '1.64888141084061e18', '乙方提交符合项目要求的正式资料后，甲方一次性支付乙方全部合同款项。', '100', '90490', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (586, '1.64888141083962e18', '签订合同后15日内支付预付款10%', '10', '68400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (587, '1.64888141083962e18', '完成前期资料收集、内外业基础工作后支付合同金额的30%', '30', '205200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (588, '1.64888141083962e18', '按要求完成数据汇交支付合同金额的40%', '40', '273600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (589, '1.64888141083962e18', '服务期满后支付合同金额的20%', '20', '136800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (590, '1.64888141083484e18', '双方合同签订后且乙方人员和设备已进场，根据预估工作量甲方向乙方支付预估总费用的30%。', '30', '560052.9', '2022-12-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (591, '1.64888141083484e18', '成果交付并通过甲方验收，双方签订工作量确认单计算实际总费用，按照工作量确认单签订时间30天内甲方向乙方付清剩余尾款。', '70', '1306790.1', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (592, '1.64888141083395e18', '乙方完成外业测量工作，提交《大唐普格海口风电场工程地形图测绘工作中间成果》经甲方认可，并在收到乙方出具的相应金额的增值税发票后的28天内，甲方支付给乙方的金额为签约合同价格的40%', '40', '111600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (593, '1.64888141083395e18', '乙方完成全部测绘工作，提交《大唐普格海口风电场工程地形图测绘工作成果报告》经甲方认可，并在收到乙方出具的相应金额的增值税发票后的28天内，甲方支付给乙方的金额为签约合同价格的40%', '40', '111600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (594, '1.64888141083395e18', '在乙方完成了全部合同工作，最终测绘成果报告经审查验收合格后的42天（以甲方出具的最终成果验收合格证明的日期起算，甲方需在乙方提交最终测绘成果报告15天内出具验收合格证明）内，甲方与乙方应办理合同最终结算手续。双方就最终结算没有异议并签字确认后的35天内，甲方支付给乙方的金额为签约合同价格的20%', '20', '55800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (595, '1.6488814108326e18', '合同费用经甲方审核完毕后一次性结算付款，本合同在甲方收到业主方付款后，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '97', '1455013.22', NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (596, '1.6488814108326e18', '质量保证金（合同结算总额的3%）从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。在后期的使用过程中，如发现存在质量问题，乙方将无偿处理。', '3', '45000.41', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (597, '1.64888141083033e18', '项目完成后由乙方开具正式发票，甲方收到发票后15个工作日内通过转账方式向乙方一次性支付全部费用', '100', '57500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (598, '1.64888141082641e18', '合同签订后 7 日内支付合同价款的 20%', '20', '139000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (599, '1.64888141082641e18', '完成测量标志普查工作后 7 日内支付合同价款的 30%', '30', '208500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (600, '1.64888141082641e18', '完成测量标志维护工作后 7 日内支付合同价款的 40%', '40', '278000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (601, '1.64888141082641e18', '项目通过采购人组织的验收后 7 日内支付合同价款的 10%', '10', '69500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (602, '1.64888141082416e18', '合同双方签字生效三日内，甲方付乙方全款', '100', '18000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (603, '1.6488814108239e18', '合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款', '100', '218000', NULL, '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。');
INSERT INTO `cmc_contract_payment` VALUES (604, '1.6488814108226e18', '合同签订后7个工作日支付总金额的10%预付款；', '10', '81000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (605, '1.6488814108226e18', '完成野外测量、内业资料编辑计算并形成报告且经审查合格后支付合同金额的40%；', '40', '324000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (606, '1.6488814108226e18', '完成河湖管理范围划定管理线桩（牌）并经验收合格后支付合同金额的30%；', '30', '243000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (607, '1.6488814108226e18', '项目全部完工并经验收合格后支付合同金额20%。', '20', '162000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (608, '1.64888141082038e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '42000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (609, '1.64888141081974e18', '乙方向甲方提交合格、完整、有效的测绘成果资料（资料必须符合验收要求）后，甲方一次性付清双方约定的全部工程款。', '100', '178200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (610, '1.64888141081582e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '169097', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (611, '1.64888141081582e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (612, '1.64888141081173e18', '付款方式：划界成果（讨论稿）提交评审通过后支付 60%', '60', '906108', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (613, '1.64888141081173e18', '划界工程验收合格， 划界成果经古蔺县总河长办审定通过后支付 40%', '40', '604072', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (614, '1.64888141080131e18', '第一次支付在乙方提供正式测量成果后，甲方支付给乙方合同暂定价金额的70%', '70', '97159.3', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (615, '1.64888141080131e18', '第二次支付在甲方的防洪报告编制的费用到帐后一个月内，甲方向乙方支付本合同总服务费的剩余款项', '30', '41639.7', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (616, '1.64888141080038e18', '合同签订后15个工作日内，招标人向中标人支付预算金额的 40 %作为首付款。', '40', '8640000', '2021-08-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (617, '1.64888141080038e18', '中标人将管线普查成果全部提交完毕并经测绘成果质量检验机构检验合格，出具质检报告并提交经采购人确认的所有正式成果资料后，招标人于15个工作日内向中标人支付进度款。进度款=（全野外探测单价×全野外探测实际提交长度+内外业结合核实探测单价×内外业结合核实探测实际提交长度）×80%-首付款', NULL, NULL, NULL, '（2022年支付）');
INSERT INTO `cmc_contract_payment` VALUES (618, '1.64888141080038e18', '全部普查成果完成整合检查、汇交入库，且项目通过验收后120个工作日内招标人向中标人支付尾款。尾款=合同总金额-首付款-进度款', NULL, NULL, NULL, '（2023年支付）');
INSERT INTO `cmc_contract_payment` VALUES (619, '1.64888141080022e18', '乙方向甲方提交单个委托工程正式测绘成果【该测绘成果须经专家评审通过(若有时)】，并办理完成单个委托的结算相关手续，甲方向乙方支付至该委托测绘工作结算金额的90%。', '90', NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (620, '1.64888141080022e18', '乙方将成果提交行政主管部门（若有时）及全套合格资料移交甲方档案室后，甲方向乙方支付至该委托测绘工作结算金额的95%。', '5', NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (621, '1.64888141080022e18', '在复审完成后，最终结算金额以复审金额为准，甲方根据复审结果支付尾款；即在复审完成后，支付至审定金额的100%。', '5', NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (622, '1.64888141079824e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '249700', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (623, '1.64888141079065e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '272347.92', NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (624, '1.64888141079065e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (625, '1.64888141078865e18', '乙方进场，开展现场检测工作，并完成水库水位高程校验出具检测报告并经甲方验收合格后，乙方向甲方提供符合要求的合同总额增值税专用发票、付款申请，且甲方收到业主支付的服务费用后，甲方支付全部97%服务费用。', '97', '698400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (626, '1.64888141078865e18', '一年后，检测设备运行无任何问题后，支付剩余的3%质保金。', '3', '21600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (627, '1.64888141078775e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '97', '647673.85', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (628, '1.64888141078775e18', '质量保证金从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '3', '20031.15', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (629, '1.64888141078257e18', '乙方工程完成结束后，一次性支付所有费用。', '100', '78000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (630, '1.64888141078181e18', '本合同签订生效后，甲方在5日内向乙方支付合同总额20%的预付款；', '20', '40000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (631, '1.64888141078181e18', '其余80%的合同款在乙方完成合同后，并开具全额增值税发票（6%税率）后同时支付。', '80', '160000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (632, '1.64888141078023e18', '第一次合同款支付在乙方完成勘察中间成果，提交中间成果报告经甲方认可，并在收到乙方出具的相应金额的增值税发票后的28天内，甲方支付给乙方的金额为签约合同价格的30%。', '30', '390000', NULL, '甲方付款满足“以收定支原则”，在收到业主相应款项后再对乙方支付。');
INSERT INTO `cmc_contract_payment` VALUES (633, '1.64888141078023e18', '第二次合同款支付在乙方完成勘察最终成果，并提交最终成果报告经甲方认可，并在收到乙方出具的相应金额的增值税发票后的28天内，甲方支付给乙方的金额为签约合同价格的30%。', '30', '390000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (634, '1.64888141078023e18', '在乙方完成了全部合同工作，最终成果经审查验收合格后的42天（以甲方出具的最终成果验收合格证明的日期起算）内，甲方与乙方应办理合同最终结算手续。', '40', '520000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (635, '1.64888141077652e18', '乙方提交平泉街道新桥村储备土地2016-70号地块砂石资源量估算报告后，甲方一次性支付该合同款。甲方付款前，乙方需提供满足甲方要求的等额增值税专用发票。', '100', '48000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (636, '1.64888141076839e18', '合同签订后，乙方测量完成甲方验收合格并移交测量成果后，甲方一次性支付（支付前乙方应开具等额增值税专用发票，税率为6%）。', '100', '121091.71', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (637, '1.64888141076808e18', '完成勘测定界报告后，满足甲方要求，收到增值税发票审核无误后，30个工作日内支付合同总价的20%。', '20', '128000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (638, '1.64888141076808e18', '完成地籍测绘报告后，满足甲方要求，收到增值税发票审核无误后，30个工作日内支付合同总价的20%。', '20', '128000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (639, '1.64888141076808e18', '完成实测地形图工作并提供实测地形图后，收到增值税发票审核无误后，30个工作日内支付合同总价的20%。', '20', '128000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (640, '1.64888141076808e18', '完成土地出让报告以及土地出让阶段全部相关测绘工作后，满足甲方要求，收到增值税发票审核无误后，30个工作日内支付合同总价的40%。', '40', '256000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (641, '1.64888141076808e18', '支付上述每一笔款项前乙方须向甲方提交相应金额税率为6%合格的增值税专用发票。增值税专用发票税率为6%（若国家税收政策发生变化，在不含税价不变的基础上，按国家最新政策执行）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (642, '1.64888141075962e18', '合同签订生效后30天内，支付合同总金额的40%', '40', '77600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (643, '1.64888141075962e18', '完成调查项目的监理工作并提交相应的项目成果，经甲方审查通过后支付合同总金额的60%', '60', '116400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (644, '1.64888141075289e18', '乙方完成界桩布置设计工作后，甲方向乙方支付合同价款的20%', '20', '85000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (645, '1.64888141075289e18', '乙方完成界桩制作工作后，甲方向乙方支付合同价款的40%', '40', '170000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (646, '1.64888141075289e18', '乙方完成界桩埋设、界桩放线与测量、征地红线范围图绘制等工作，并配合甲方完成现场验收及移交后，甲方向乙方支付合同价款的40%', '40', '170000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (647, '1.64888141074698e18', '合同工作内容完成且验收合格后，甲方向乙方一次性支付全部合同价款(人民币96000元,大写：玖万陆仟元整)。', NULL, '96000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (648, '1.64888141074452e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '580047.01', NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (649, '1.64888141074452e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (650, '1.6488814107406e18', '采购合同签订完成且乙方投入人员和设备到位、完成方案制定和前期准备工作后，甲方于 60 个工作日内向乙方支付暂定总宗数合计金额的 15% ', '15', '1102500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (651, '1.6488814107406e18', '在乙方提交不动产权籍调查成果的 40% 后，甲方于 60个工作日内向乙方支付至暂定总宗数合计金额的 35% ', '20', '1470000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (652, '1.6488814107406e18', '乙方实际提交全部不动产权籍调查成套成果，且通过验收合格后，甲方于 60 个工作日内向乙方支付至实际完成宗数合计金额的 80% ', '45', '3307500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (653, '1.6488814107406e18', '乙方完成数据汇交、入库，档案资料移交，并办理结算后，甲方于 60 个工作日内向乙方支付至实际完成宗数合计金额的 95% ', '15', '1102500', '2023-08-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (654, '1.6488814107406e18', '项目质保期和售后服务期（如有）满后 60 个工作日内，向乙方支付实际完成宗数合计金额的 5% ', '5', '367500', '2024-08-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (655, '1.64888141073896e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (656, '1.64888141073896e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (657, '1.64888141073892e18', '合同签订后10日内，甲方向乙方支付合同预估总金额的30 %', '30', '72000', '2021-11-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (658, '1.64888141073892e18', '乙方提交所有成果资料，并通过行业行政主管部门的普查成果验收，验收合格后30日，甲方向乙方支付项目结算总费用至80%', '50', '120000', '2022-01-31', '该项目为按实结算，在提交成果经验收合格后，甲乙双方对整个项目工作量进行核算，按照单价进行结算');
INSERT INTO `cmc_contract_payment` VALUES (659, '1.64888141073892e18', '结算时留取10%作为工程质量保证金，工作成果归档后一年内，乙方完成技术服务，且未出现质量问题，支付工程质量保证金。', '10', '24000', '2022-12-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (660, '1.64888141073892e18', '留取10%作为未到款保留金，甲方收取相关工作费用后，甲方向乙方支付未到款保留金。', '10', '24000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (661, '1.64888141073606e18', '项目合同签订后，甲方向乙方支付暂定合同总金额的15%', '15', '848100', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (662, '1.64888141073606e18', '乙方完成外业测绘、权籍调查、资料收集后，经业主方检查通过后，甲方向乙方支付暂定合同总金额的20%', '20', '1130800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (663, '1.64888141073606e18', '乙方完成数据库建设经业主方组织验收合格后，甲方向乙方支付暂定合同总金额的30%', '30', '1696200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (664, '1.64888141073606e18', '乙方完成资料整理归档，将数据库汇交至省级检查合格，并向甲方提交所有成果后，甲方支付至合同实际结算总金额的90%', '25', '1413500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (665, '1.64888141073606e18', '质量保证金：合同实际结算总金额的10%为质量保证金，成果交付一年后无质量问题甲方无条件退还乙方（无息）。', '10', '565400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (666, '1.64888141073151e18', '本协议费用采用单价承接方式。', NULL, NULL, NULL, '详见合同第六条');
INSERT INTO `cmc_contract_payment` VALUES (667, '1.64888141073151e18', '乙方自行负责所派驻项目现场人员的人身安全，购买人身保险，配备必要的安全防护设施，本协议甲方认为其费用已包含在协议价格中，不再另行支付费用。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (668, '1.64888141072774e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '95248.38', NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (669, '1.64888141072774e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (670, '1.64888141071915e18', '在乙方完成经甲方认可的全部工作内容，且甲方收到业主相应款项后一次性支付。', '100', '358700', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (671, '1.64888141071733e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '54526', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (672, '1.64888141071733e18', '本合同不扣减质量保证金', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (673, '1.64888141071096e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '160774.44', NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (674, '1.64888141071096e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (675, '1.64888141070773e18', '提交核查成果资料以及结算资料后 15天内，甲方应一次性付清核查费用，并由乙方向甲方开具有效发票进行收款。', '100', '154050', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (676, '1.64888141070669e18', '根据乙方当月实际完成经甲方验收合格的工程数量按月办理结算。', NULL, '0', NULL, '工程进度款由甲方根据验工计价情况及业主（上级）拨款情况统一分配并分期分批支付，且不知福利息 和违约金等其他费用。如遇上级拨款延迟，甲方拨款时间顺延并不承担延期责任。乙方同意每期结算时甲方预留计划总额的10%作为保留金，待竣工结算时无息返还5%，剩余5%待缺陷责任期扣除质量缺陷修复费用后无息返还。');
INSERT INTO `cmc_contract_payment` VALUES (677, '1.64888141070499e18', '对乙方已完成全部任务，提交的相应产品经甲方验收合格，即可办理结算手续。根据双方签订的测绘合同完成情况，将完工结算所需的各项资料（主要包括但不限于：验收表、资料提供单、归档产品交接清单、等）整理成正式的结算报告，向甲方提出结算申请。', '95', '555379.5', '2020-06-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (678, '1.64888141070499e18', '质量保证金返还', '5', '29230.5', '2020-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (679, '1.6488814107048e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '91600', '2020-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (680, '1.64888141070254e18', '测绘成果验收合格后，甲方向乙方一次性支付按实际测绘工作量计算的项目费用95%金额的工程款；', '95', '62700', '2020-04-08', '测绘成果验收合格后，甲方向乙方一次性支付按实际测绘工作量计算的项目费用95%金额的工程款；');
INSERT INTO `cmc_contract_payment` VALUES (681, '1.64888141070254e18', '剩余5%工程款作为质保金暂不支付，一年以后无质量问题甲方无息向乙方退还。', '5', '3300', '2021-03-30', '剩余5%工程款作为质保金暂不支付，一年以后无质量问题甲方无息向乙方退还。');
INSERT INTO `cmc_contract_payment` VALUES (682, '1.64888141070017e18', '与原合同一致', NULL, '0', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (683, '1.64888141069733e18', '项目技术方案设计书提交并经采购人确认后30个日历日内支付合同总金额30%；', '30', '225000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (684, '1.64888141069733e18', '提交数字线划图、正射影像图成果和第三方质量检查报告后30个日历日内支付合同总金额30%；', '30', '225000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (685, '1.64888141069733e18', '形成数据库成果并向市局汇交合格后30个日历日内支付合同总金额40%；', '40', '300000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (686, '1.64888141069686e18', '乙方完成所有土地核勘工作且提交成果资料，该项目整体通过验收后，甲方向乙方支付所有款项', '100', '329000', '2021-11-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (687, '1.64888141069648e18', '（一）在出具正式的测绘报告后，经服务项目所在镇（街）拆迁办审核无误，由镇（街）拆迁办按相关财务规定向乙方支付相关款项。具体付款方式及相关费用标准按各镇（街）拆办与乙方所签署的服务合同约定执行。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (688, '1.64888141069648e18', '(二）因各镇（街）拆迁办使用的是财政资金，各镇（街）拆迁办在前款规定的付款时间为向政府采购支付部门提出办理财政支付申请手续的时间（不含政府财政支付部门审核的时间），在规定时间内提出支付申请手续后即视为各镇（街）拆迁办是按期支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (689, '1.64888141069597e18', '签订合同进场开展工作后，甲方财政资金到账20个工作日内支付合同金额的20%', '20', '581800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (690, '1.64888141069597e18', '完成林权数据整合建库和档案整理并入库汇交后，甲方财政资金到账20个工作日支付合同金额的60%', '60', '1745400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (691, '1.64888141069597e18', '项目验收完成后，甲方财政资金到账20个工作日支付合同金额的20%', '20', '581800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (692, '1.64888141069418e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '218553.77', NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (693, '1.64888141069418e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (694, '1.64888141069194e18', '合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款，在甲方付款前乙方需向甲方提交相应金额增值税专用发票。', '100', '474800', NULL, '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。');
INSERT INTO `cmc_contract_payment` VALUES (695, '1.64888141069148e18', '（1）对乙方已完成全部任务，提交的相应产品经甲方验收合格，即可办理结算手续。根据双方签订的测绘合同完成情况，将完工结算所需的各项资料（主要包括但不限于：验收表、资料提供单、归档产品交接清单、等）整理成正式的结算报告，向甲方提出结算申请。', '100', '31468', '2020-06-30', '本合同不扣减质量保证金。');
INSERT INTO `cmc_contract_payment` VALUES (696, '1.64888141068711e18', '乙方提交成果经甲方检验合格后，且乙方提供足额合格发票后二十个工作日内甲方一次性支付全部测绘费用。', '100', '226000', '2020-08-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (697, '1.64888141068373e18', '乙方完成项目任务35%时向甲方提出支付申请，经甲方确认后进行结算，结算金额为：中标单价*实际完成任务总数-已支付合同金额。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (698, '1.64888141068373e18', '乙方完成项目任务60%时向甲方提出支付申请，经甲方确认后进行结算，结算金额为：中标单价*实际完成任务总数-已支付合同金额。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (699, '1.64888141068373e18', '乙方完成项目任务80%时向甲方提出支付申请，经甲方确认后进行结算，结算金额为：中标单价*实际完成任务总数-已支付合同金额。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (700, '1.64888141068373e18', '乙方完成项目任务100%时向甲方提出支付申请，经甲方确认后进行结算，结算金额为：中标单价*实际完成任务总数-已支付合同金额。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (701, '1.64888141068225e18', '乙方完成外业测量工作，提交《凉山州盐源县光伏扶贫电站地形图测绘工作中间成果》经甲方认可，并在收到乙方出具的相应金额的增值税发票后的28天内，甲方支付给乙方的金额为签约合同价格的40%', '40', '213840', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (702, '1.64888141068225e18', '乙方完成全部测绘工作，提交《凉山州盐源县光伏扶贫电站地形图测绘工作成果报告》经甲方认可，并在收到乙方出具的相应金额的增值税发票后的28天内，甲方支付给乙方的金额为签约合同价格的40%', '40', '213840', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (703, '1.64888141068225e18', '乙方完成了全部合同工作，最终测绘成果报告经审查验收合格后的42天（以甲方出具的最终成果验收合格证明的日期起算，甲方需在乙方提交最终测绘成果报告15天内出具验收合格证明）内，甲方与乙方应办理合同最终结算手续。双方就最终结算没有异议并签字确认后的35天内，甲方支付给乙方的金额为签约合同价格的20%', '20', '106920', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (704, '1.64888141067889e18', '乙方向甲方提交中间成果后，甲方向乙方支付合同总价的20%，即支付人民币145660元。', '20', '145660', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (705, '1.64888141067889e18', '本项目最终成果经甲方验收合格后，甲方向乙方支付合同总价的40%，即支付人民币291320元。', '40', '291320', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (706, '1.64888141067889e18', '本项目完成后，甲方向乙方支付合同总价的40%，即支付人民币291320元。', '40', '291320', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (707, '1.6488814106751e18', '合同签订后30日内，支付合同价款的30%', '30', '517800', '2023-01-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (708, '1.6488814106751e18', '提交整合数据成果，并通过质检30日内，支付合同价款60%', '60', '1035600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (709, '1.6488814106751e18', '验收合格后30日内支付剩余的10%', '10', '172600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (710, '1.64888141067448e18', '工程完成提交所有资料后，甲方先按合同价的 30%付给乙方', '30', '67890', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (711, '1.64888141067448e18', '经验收合格，支付至实际完成总合同额 80%的工程款', '50', '113150', NULL, '（取整至千元）');
INSERT INTO `cmc_contract_payment` VALUES (712, '1.64888141067448e18', '，实际完成工作量余款 20%作为质保金，', '20', '45260', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (713, '1.64888141066842e18', '乙方完成界桩布置设计工作后，甲方向乙方支付合同款价的20%', '20', '96700', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (714, '1.64888141066842e18', '乙方完成界桩测设制作工作后，经甲方现场核实并签字确认后，乙方向甲方提出支付申请，甲方收到乙方支付申请后15天内向乙方支付合同价款的40%', '40', '193400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (715, '1.64888141066842e18', '乙方提供全部最终成果并通过甲方组织的验收后，乙方向甲方提出支付申请，甲方收到乙方支付申请后15天内向乙方支付合同价款的40%', '40', '193400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (716, '1.64888141066293e18', ' 自合同签订之日起5个工作日内甲方向乙方预付工程暂定总价款的50 %', '50', '95168.3', '2020-06-10', NULL);
INSERT INTO `cmc_contract_payment` VALUES (717, '1.64888141066293e18', '乙方完成全部测绘工作后向甲方交付完成委托事项的测绘成果，测绘成果经甲方确认后，且将测绘成果提交政府部门审批前，应通知甲方支付工程暂定总价的20%', '20', '38067.32', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (718, '1.64888141066293e18', '乙方自政府部门审批同意测绘成果之日起1个工作日内，根据实际工作量编制工程结算书。经甲、乙双方共同审定同意工程结算书后，乙方向甲方出具缴费通知书，作为结算依据。甲方自收到缴费通知书之日起30个工作日内向乙方支付剩余测绘工程费。', '30', '57100.98', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (719, '1.64888141066063e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '140285.7', NULL, '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。');
INSERT INTO `cmc_contract_payment` VALUES (720, '1.64888141066063e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (721, '1.64888141064946e18', '乙方成果提交完成并通过甲方验收后，且乙方向甲方开具协议总金额等额增值税专用发票，甲方于30日内一次性向乙方支付本协议全部费用。', '100', '15000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (722, '1.64888141064943e18', '政府采购合同签订生效后，甲方向乙方支付预算金额的40%为预付款', '40', '3400704', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (723, '1.64888141064943e18', '乙方提交的成果经监理单位检查合格且甲方收到监理出具的监理报告后，乙方向甲方提交请款申请，甲方按照乙方实际提交的成果情况支付第1次进度款，第1次进度款最多支付预算金额的20%', '20', '1700352', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (724, '1.64888141064943e18', '乙方提交的成果经质检单位检查合格且甲方收到质检出具的检验报告后，乙方向甲方提交请款申请，甲方按照乙方实际提交的成果情况支付第2次进度款，第2次进度款最多支付预算金额的10%', '10', '850176', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (725, '1.64888141064943e18', '乙方将数据成果成功汇交至成都市规划和自然资源局后，且项目通过甲方验收合格后，甲方向乙方支付尾款。尾款=合同结算总金额-预付款-第1次进度款-第2次进度款。', NULL, NULL, NULL, '若甲方已支付的费用（预付款+第1次进度款+第2次进度款）＞合同结算总金额，则乙方退回甲方已支付的多余的费用=预付款+第1次进度款+第2次进度款-合同结算总金额。');
INSERT INTO `cmc_contract_payment` VALUES (726, '1.64888141064346e18', '合同签订后，承接方完成控制测量工作并经委托方验收合格后支付全部费用。', '100', '20000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (727, '1.64888141064162e18', '1.在合同生效之日起甲方收到乙方如下材料：1.项目实施计划书；2.40%等值专业发票；3.工作情况确认表；45 个工作日内，甲方向乙方支付技术服务报酬总额的40%', '40', '770000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (728, '1.64888141064162e18', '在乙方完成影像瓦片制作工作并提交成果数据及相关质检报告，成果满足甲方技术要求，甲方通过乙方提出的初验申请且收到相应金额的税务发票后 45 个工作日内，向乙方支付技术服务报酬的 50%', '50', '962500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (729, '1.64888141064162e18', '乙方完成项目，甲方向乙方出具竣工验收合格书面意见且收到剩余全部金额（包含质保金部分）的税务发票后三个月内，向乙方支付技术服务报酬的 10%', '10', '192500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (730, '1.64888141064051e18', '成果报告取得专家评审通过意见且取得相关主管部门批复文件或审查', '100', '130000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (731, '1.64888141063957e18', '由甲方核对乙方每三个月实际发生的工作量（以出具正式盖章的测绘报告书的全额结算，出具初稿报告的按90%结算）并经甲方确认后，甲方在十五个工作日内向乙方支付相关费用。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (732, '1.64888141063127e18', '本合同生效后，乙方人员、设备进场到位后，甲方收到乙方支付申请及人员、设备进场确认单审核合格后28天内支付给乙方第一笔价款，合同总价的20%', '20', '66504', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (733, '1.64888141063127e18', '乙方2024年主汛前完成对金沙大坝近坝库区和尾水淤积断面及荷花池大桥生态流量监测断面进行测量工作并提交测量成果报告（纸质版一式叁份，正本一份，副本贰份，配套正本扫描件电子版光盘贰份）至甲方档案管理部门，甲方收到乙方支付申请及档案接受证书审核合格后28天内支付至合同总价的50%（含第一次支付金额）', '30', '99756', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (734, '1.64888141063127e18', '乙方在2024年汛后、银江水电站蓄水前再次完成对金沙大坝坝下尾水泥沙淤积及荷花池大桥生态流量监测断面进行测量工作并提交测量成果报告（（纸质版一式叁份，正本一份，副本贰份，配套正本扫描件电子版光盘贰份）至甲方档案管理部门，甲方收到乙方支付申请及档案接受证书审核合格后28天内支付乙方剩余合同价款。', '50', '166260', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (735, '1.64888141063127e18', '本合同进度款按每季度结算一次。承包人在每季度末的20日向发包人提出结算申请，经发包人审查认可后 28天内完成支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (736, '1.64888141063127e18', '发包人将在每季度的付款中扣留当期应结算款总额的5%，作为测量责任保留金；扣留总额达到合同总价的5%为止。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (737, '1.64888141063127e18', '测量工程项目全部竣工后的28天内，发包人将无息返还测量责任保留金总额的50%；测量工程项目全部竣工结算完成后的42天内，发包人将无息返还剩余测量责任保留金。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (738, '1.64888141063127e18', '合同生效后承包人主要人员及设备进场且承包人已按合同规定办理相关一切保险并将其保险副本提交发包人认可后，由承包人提出书面申请并经发包人审核确认后14天内，发包人将向承包人支付合同总价（扣除备用金）的10%作为预付款。', NULL, '1083263.7', NULL, '预付款自本合同第一次进度结算时开始扣回，每次扣回金额为当期结算金额的20%，至合同结算金额达合同总价（扣除备用金）80%时应全部扣回。');
INSERT INTO `cmc_contract_payment` VALUES (739, '1.64888141063127e18', '本合同生效后，承包人按季度申请支付，经发包人审核后付款。承包人每次结算支付前，承包人应按发包人要求提交结算申请及与该次结算金额等额的增值税专用发票，发包人审核合格之日后28天内予以支付。', NULL, NULL, NULL, '详见合同第六条中的8.3款约定');
INSERT INTO `cmc_contract_payment` VALUES (740, '1.64888141063127e18', '当进度款结算累计总金额达到合同金额（含已确定的变更金额）发包人预计的本合同完工总金额的95%时，暂停支付，余款在合同完工结算后支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (741, '1.64888141063127e18', '按乙方完成的劳务项目工程量，甲方以不超过本期工程款（进度款）向乙方支付相应劳务费', NULL, NULL, NULL, '甲方收到该项目建设单位的工程款（进度款）后，按乙方完成的劳务项目工程量，甲方以不超过本期工程款（进度款）向乙方支付相应劳务费，并扣除项目建设单位及有关部门要求上缴的一切税费，需要甲方代为乙方办理业务的一切费用。');
INSERT INTO `cmc_contract_payment` VALUES (742, '1.64888141063127e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '80100', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (743, '1.64888141063127e18', '预付款总额：发包人将向承包人支付合同总价（扣除暂列金）的10%作为预付款。', '10', '493826', NULL, '预付款支付：预付款支付按两次支付，具体见以下规定。第一次：在合同签订且承包人主要人员及设备进场后，由承包人提出书面申请并经发包人审核确认后14天内，发包人将向承包人支付预付款总额的50%，作为第一次预付款。第二次：首部枢纽施工标开工后14天内，发包人将向承包人支付预付款总额的50%，作为第二次预付款。预付款扣回：自第一次进度款结算时开始平均扣回，结算至第四次进度款时（共4次结算）全部扣回。');
INSERT INTO `cmc_contract_payment` VALUES (744, '1.64888141063127e18', '以“测量及复核服务费用支付表”为参考依据，合同费用每季度结算一次，并考核支付。', '80', '3950608', NULL, '当累计总金额达到合同金额（不含暂列金额）90%时，暂停支付，余款在巴拉水电站工程全部完工后14天内支付。');
INSERT INTO `cmc_contract_payment` VALUES (745, '1.64888141063127e18', '巴拉水电站工程全部完工后14天内支付', '5', '246913', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (746, '1.64888141063127e18', '测量及复核质量保证金为合同金额的5%，在最后一期结算时扣留。', '5', '246913', NULL, '测量及复核工程项目全部竣工后的28天内，发包人将无息返还测量及复核责任保证金总额的50%；巴拉水电站工程通过竣工结算审计后的14天内，发包人将无息返还剩余测量及复核责任保证金。');
INSERT INTO `cmc_contract_payment` VALUES (747, '1.64888141063127e18', '安全生产费结算：按年结算。', NULL, NULL, NULL, '在项目开工后，由承包人申请安全生产费，发包人在收到承包人合格申请资料56天内，向承包人结算安全生产费的25%（当年12个月安全生产费用），主要用于承包人安全生产的各项准备工作及安全投入。每年初（合同年）支付当年（不足整年12月，支付剩余月份的）安全生产费；同时在投标报价限额内审核上一年度（第一次不用审核）安全生产费使用情况，对未足额投入使用的安全生产费予以扣除。年度支付时提交本年度安全生产费投入计划清单（首次支付时承包人应提供履约保证金证明材料）。');
INSERT INTO `cmc_contract_payment` VALUES (748, '1.64888141063127e18', '一般项目、大坝外部变形观测、金龙山及霸王山监测、水库水温观测及资料整编分析总价承包，每季度结算支付一次。', NULL, NULL, NULL, '每季度承包人完成合同约定的工作内容并经发包人验收合格后（可与测量服务一并验收），承包人提供下列合格单据后56天内，发包人向承包人结算本季度一般项目、大坝外部变形观测、金龙山及霸王山监测、水库水温观测及资料整编分析费用的6%（未发生或取消的总价项目，发包人有权扣除或部分扣除）。最后一次剩余未结算部分在承包人完成全部工作内容并经发包人竣工验收合格后，承包人提供下列合格单据后56天内，发包人一次性结清。');
INSERT INTO `cmc_contract_payment` VALUES (749, '1.64888141063127e18', '本补充协议工作完成后，乙方提交成果报告，经甲方验收合格后，一次性办理结算。', '100', '75669.58', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (750, '1.64888141063127e18', '本补充协议工作完成后，乙方提交成果报告，经甲方验收合格后，一次性办理结算。', '100', '43269.62', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (751, '1.64888141063127e18', '合同费用经甲方审核完毕后，乙方向甲方提交相应金额增值税专用发票，甲方视项目业主付款情况，经甲方审核无误后30个工作日内支付。', '100', '40948.65', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (752, '1.64888141063127e18', '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (753, '1.64888141063127e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (754, '1.64888141063127e18', '乙方完成地形地类图测绘工作，并提交集镇居民小区、居民点、公墓、道路地形地类图测绘中间成果后，甲方向乙方支付合同价款的30%', '30', '142103.51', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (755, '1.64888141063127e18', '乙方提交最终地形地类图成果，并完成界桩埋设、界桩放线与测量、征地红线范围图绘制等全部界桩测设工作及成果提交，配合甲方完成验收后，甲方向乙方支付合同价款的70%', '70', '331574.87', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (756, '1.64888141063127e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (757, '1.64888141063127e18', '合同签订并完成本合同全部外业工作后，乙方向甲方提出支付申请，甲方接到乙方支付申请后15天内向乙方支付合同总费用的40%。', '40', '632000.92', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (758, '1.64888141063127e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。', '60', '948001.37', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (759, '1.64888141063127e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (760, '1.64888141063127e18', '观音岩水电站变形监测控制网复测及坝前淤积和坝后冲刷测量项目，分两次结算，乙方完成每一年度工作，凭经甲方签署的完工工程量签证单，以及相应合同单价（或调整暂估价后的合同单价）对应的金额办理合同价款结算。', '50', '289050', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (761, '1.64888141063127e18', '观音岩水电站变形监测控制网复测及坝前淤积和坝后冲刷测量项目，分两次结算，乙方完成每一年度工作，凭经甲方签署的完工工程量签证单，以及相应合同单价（或调整暂估价后的合同单价）对应的金额办理合同价款结算。', '50', '289050', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (762, '1.64888141063127e18', '5.4.1施工辅助设施：施工辅助设施按总价项目列报，总价中包括承包人施工辅助设施的建设、拆除、环境恢复等所需的全部费用，在发包人或监理人检查确认承包人完成情况后，按比例计入月度结算款并支付。', NULL, NULL, NULL, '详见本合同第五章合同条款第5条（P12）');
INSERT INTO `cmc_contract_payment` VALUES (763, '1.64888141063127e18', '承包人当季度完成的本底测量，成果提交后在发包人或监理人检查确认承包人完成情况后，计入季度结算款并支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (764, '1.64888141063127e18', '承包人当季度完成的系统维护、监测及分析，在发包人或监理人检查确认承包人完成情况后，计入季度结算款并支付。', NULL, NULL, NULL, '以上总价承包项目各项累积结算总额不得超过合同价格清单中对应项总额，超过部分发包人将不予支付。');
INSERT INTO `cmc_contract_payment` VALUES (765, '1.64888141063127e18', '5.4.2 单价承包项目 中间验收后，纳入月度进度款中结算。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (766, '1.64888141063127e18', '5.5农民工工资保证金为当期结算金额的 2%，由发包人在结算时扣留并列入往来账管理，每 3 个月清算一次。清算时，承包人应将前 3 个月内支付农民工工资的相关证明材料和前 3 个月内无拖欠农民工工资的承诺书，作为结算支付报表的附件，提交监理人审核、发包人确认，否则将不予清算。', NULL, NULL, NULL, '当期清算后在下期结算时，应继续按上述约定扣留农民工工资保证金。');
INSERT INTO `cmc_contract_payment` VALUES (767, '1.64888141063127e18', '5.6 质量保证金 土建工程、设备安装工程及本底测量，发包人在每期的结算中扣留当期结算金额的 3%作为质量保证金，扣留总额达到合同总金额的 3%为止，上述工作结束后可用质量保函代替。质保期满后（质保期为 2 年，自土建工程、设备安装、本底测量结束起开始计算），发包人在收到承包人质量保证金或质量保函退还申请后，应于 14 日内会同承包人按照合同约定的内容进行核实。如无异议，一次性无息返还质量保证金或保函。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (768, '1.64888141063127e18', '库区水温观测技术服务共分4期支付，按年度办理结算，受托人完成当年水温观测服务等相关工作，提交季度及年度成果报告并通过委托人组织的审查后支付，每期支付库区水温观测技术服务费合价的25%。', '25', '724625', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (769, '1.64888141063127e18', '当结算款累计总金额达到合同金额（含已确定的变更金额）的95%时，暂停支付', '70', '2028950', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (770, '1.64888141063127e18', '在工程完工结算并由委托人（或委托人委托的第三方咨询机构）完成审核后，支付剩余款项。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (771, '1.64888141063127e18', '委托人在仪器和设备结算中扣留仪器和设备价款总额的3%作为质量保证金，缺陷责任期满后（缺陷责任期2年，自仪器和设备安装完成并经委托人验收合格起算），未发生质量事故和质量缺陷，办理完质保金退还付款申请、审批手续后30日内支付，如果发生的质量事故和质量缺陷属受托人原因，扣除相应费用，余额返还。', '3', '86955', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (772, '1.64888141063127e18', '合同签订后30日内，支付乙方一合同金额的10%', '10', '144976', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (773, '1.64888141063127e18', '完成外业调查采样（表层样调查与采集）工作后7日内支付乙方一合同价款的30%', '30', '434928', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (774, '1.64888141063127e18', '完成成果资料制作与汇总（文字成果和图件成果）工作后7日内支付乙方一合同价款的20%', '20', '289952', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (775, '1.64888141063127e18', '完成数据库及信息管理平台建设工作后7日内支付乙方一合同价款的20%', '20', '289952', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (776, '1.64888141063127e18', '项目经上级部门验收合格，汇交成果资料后7日内支付乙方一合同价款的15%', '15', '217464', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (777, '1.64888141063127e18', '质量保证期满后，甲方于30日内，支付乙方一合同金额的5%', '5', '72488', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (778, '1.64888141063127e18', '安全生产费实行预付制。合同签订后，乙方按合同工作计划并根据合同价格表中的安全生产费拟定投入的安全生产费计划，同时提交安全生产费支付申请函及等额增值税发票，甲方收到合格的支付申请函及等额增值税专用发票后56天内一次性结算安全生产费总价的100%。乙方按合同要求完成合同规定的内容后，甲方竣工验收时对安全生产费进行核算，扣回投入不足部分。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (779, '1.64888141063127e18', '11.4.1一般项目费用：该费用包干使用，支付一般费用总价的50%。其中乙方应按照合同规定投保，含本合同工程项目全部保险。保费在报价总金额内按保单据实支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (780, '1.64888141063127e18', '11.4.2合同设备费用：该费用据实结算，支付合同设备款总价的70%。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (781, '1.64888141063127e18', '11.5乙方完成合同规定的全部工作内容并经过现场竣工验收，同时按照甲方要求完成项目归档工作后，支付一般项目费用：该费用包干使用，支付合同剩余一般费用的100%。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (782, '1.64888141063127e18', '乙方完成合同规定的全部工作内容并经过现场竣工验收，同时按照甲方要求完成项目归档工作后，支付合同设备费用：该费用据实结算，支付合同剩余合同设备款的100%。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (783, '1.64888141063127e18', '乙方完成合同规定的全部工作内容并经过现场竣工验收，同时按照甲方要求完成项目归档工作后，支付土建施工、设备安装及试运行费用：该费用总价承包，一次性支付土建施工、设备安装及试运行整体项目费用的100%。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (784, '1.64888141063127e18', '质量保证金：在本次结算时，扣留合同结算总价款的3%作为质量保证金。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (785, '1.64888141063127e18', '合同质量保证期期满后，经双方最终验收签发之日后，由乙方申请，甲方在收到乙方提交合格支付申请资料后，56天内无息将质保金返还给乙方。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (786, '1.64888141063127e18', '备用金是甲方掌握的用于本合同不可预见的相关项目所需支付的暂定费用（如采购设备数量的调整等），本合同暂定为5万元。合同执行过程中，备用金由甲方指令全部或部分地使用，或者根本不予动用，其支出额需经甲方的审核批准。乙方有权得到的备用金额应限于甲方根据本条规定决定动用备用金额的项目或不可预见费用方面的金额。备用金的结算按照经甲方批准的项目核定的数额计算，列入当期支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (787, '1.64888141063127e18', '本合同签订生效且监测人员、设备进场并出具第一期监测报告后10个工作日内，甲方向乙方支付合同总价的20%', '20', '373400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (788, '1.64888141063127e18', '施工过程中按每个季度支付合同费用，每季度支付合同总价的10%，计人民币186700.00元（大写：壹拾捌万陆仟柒佰元整），支付至合同总价的80%后暂停支付。', '60', '1120200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (789, '1.64888141063127e18', '监测工作全部完成，提交全部资料成果并办理结算后，支付剩余费用。', '20', '373400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (790, '1.64888141063127e18', '机构成立后，且承包人的主要施工设备和主要施工管理人员进场，主体工程已动工，并已提交了团体意外伤害险和已进场施工设备险保单副本后，承包人向发包人提交预付款申请及有关证明资料，经监理人核实后出具付款证书并报送发包人批准后 30 天内支付开工预付款的 100%。', '10', '839759', NULL, '详见合同P36第17.2.1 “预付款”');
INSERT INTO `cmc_contract_payment` VALUES (791, '1.64888141063127e18', '预付款的金额、支付方式如下：预付款为签约合同价的 10%，合同生效且承包人项目管理预付款从第一次进度结算款中开始扣回，每期扣款额度为经发包人审核的结算总金额的 25%，直至全部扣回为止。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (792, '1.64888141063127e18', '承包人应按本合同约定的格式向监理人提交进度付款申请单，并附相应的支持性证明文件。', NULL, NULL, NULL, '详见合同P37  第17.3条“ 工程进度付款”');
INSERT INTO `cmc_contract_payment` VALUES (793, '1.64888141063127e18', '交货款：承包人按合同约定交付全部合同内设备后，发包人在收到承包人提交的下列全部单据并经审核无误后 30 日内，发包人扣回预付款后向承包人支付所结算设备款项：①承包人按发包人要求提报价款结算书和支付申请；②承包人出具的交货清单正本一份；③发包人签署的到货验收清单正本一份；④合同中设备价格 100%金额的增值税专用发票。', NULL, NULL, NULL, '详见合同P37  第17.3条“ 工程进度付款”');
INSERT INTO `cmc_contract_payment` VALUES (794, '1.64888141063127e18', '2)中间验收款：根据项目完成进度，承包人可在交货款结算后申请一次中间验收，并支付合同内相应款项。承包人按发包人要求提交中间验收申请、付款申请、结算报表、应结算价款等额增值税专用发票和相关资料等，提交发包人审核，结算资料经发包人审核合格后相关价款30 天内支付给承包人。', NULL, NULL, NULL, '详见合同P37  第17.3条“ 工程进度付款”');
INSERT INTO `cmc_contract_payment` VALUES (795, '1.64888141063127e18', '3)竣工结算：本项目通过最终验收后，承包人按发包人要求提交支付申请、结算报表、应结算价款等额增值税专用发票和由监理人组织、发包人主持开展的工程量复核专题会纪要、承包合同交（完）工验收会纪要（包含对交工范围、工程量、工期的意见；工程实体检查、竣工资料检查和工程质量评定意见；工程遗留问题处理的意见；交工验收结论意见书等），并且在本次结算中明确提出“工程量已复核、档案已移交”的审核意见，待发包人审核通过后，扣留工程竣工结算金额的 3%的质量保证金，支付给承包人剩余合同价款。', NULL, NULL, NULL, '详见合同P37  第17.3条“ 工程进度付款”');
INSERT INTO `cmc_contract_payment` VALUES (796, '1.64888141063127e18', '备注：每期进度款分两笔支付，在承包人随结算报表提供支付民工工资明细表（附民工姓名及身份证号码）并经监理人和发包人审核确认后，发包人将根据承包人应付民工工资额向承包人支付首笔进度款，待承包人付清应付民工工资并按发包人要求公示 3 天且确认无拖欠民工工资情况后，发包人将向承包人付清当期剩余进度款。', NULL, NULL, NULL, '详见合同P38 第17.3条“ 工程进度付款”');
INSERT INTO `cmc_contract_payment` VALUES (797, '1.64888141063127e18', '备注：发包人收到监理人签证的月进度付款证书并审批合格后 42 天内支付给承包人首笔进度款，在满足上述条件后支付当期剩余进度款。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (798, '1.64888141063127e18', '竣工结算款中扣留工程竣工结算金额 的 3%为质量保证金。', NULL, NULL, NULL, '详见合同P38  第17.4 条“质量、民工工资保证金”');
INSERT INTO `cmc_contract_payment` VALUES (799, '1.64888141063127e18', '农民工工资保证金为当期结算金额的 2%，由发包人在结算时扣留并列入往来账管理，每 3个月清算一次。清算时，承包人应将前 3 个月内支付农民工工资的相关证明材料和前 3 个月内无拖欠农民工工资的承诺书，作为结算支付报表的附件，提交监理人审核、发包人确认，否则将不予清算。当期清算后在下期结算时，应继续按上述约定扣留农民工工资保证金。', NULL, NULL, NULL, '详见合同P38 第17.4.4条 “民工工资保证金”');
INSERT INTO `cmc_contract_payment` VALUES (800, '1.64888141063127e18', '乙方成果提交完成并通过甲方和业主方验收后，且乙方向甲方开具协议总金额等额增值税专用发票，甲方于30日内一次性向乙方支付本协议全部费用。', '100', '15000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (801, '1.64888141063127e18', '合同签订后，乙方开具全额合同价的专用增值税发票，人员及设备进场开展技术服务完成项目的50%并提供相关资料，甲方支付合同金额的50%给乙方。', '50', '476461.5', '2023-04-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (802, '1.64888141063127e18', '服务工作结束并经甲方验收合格后，乙方按合同规定提供甲方所需资料(纸质版和电子版)，60日内甲方支付合同金额的50%给乙方。', '50', '476461.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (803, '1.64888141063127e18', '乙方完成本合同约定工作内容，经甲方验收合格，并将泥沙监测专题分析报告等资料归档（联系人：周靓，15928893554），乙方提供付款申请及开具合法的全额增值税专用发票（6%）后30个工作日内，甲方一次性支付结算款的100%。', '100', '157000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (804, '1.6488814106239e18', '第一次付款：政府采购合同签订生效且收到乙方提供的准确有效的发票后30个工作日内,甲方向乙方支付合同最高预算金额的20%作为首付款', '20', '1463132', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (805, '1.6488814106239e18', '2.第二次付款：根据乙方实际完成工作量(经质量检验单位检验合格)于2021年12月31日前据实结算，最多支付合同最高预算金额的30%。', '30', '2194698', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (806, '1.6488814106239e18', '第三次付款：根据乙方实际完成工作量(经质量检验单位检验合格)于2022年12月31日前据实结算，最多支付合同最高预算金额的30%。', '30', '2194698', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (807, '1.6488814106239e18', '第四次付款：全部普查成果完成整合检查、汇交入库，且通过验收合格后，甲方向乙方一次性支付完合同剩余结算金额。', '20', '1463132', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (808, '1.64888141062213e18', '完成本工程内窥检测的全部内容，且检测资料书面提交发包人并经发包人结算审定后，支付该项目检测款的90%', '90', '38560.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (809, '1.64888141062213e18', '本工程成功移交市政部门后，支付该项目全部剩余检测款', '10', '4284.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (810, '1.64888141061537e18', '乙方派人到场开展业务后，甲方在1个月内向乙方支付合同费用总额的20%', '20', '163760', '2021-08-02', NULL);
INSERT INTO `cmc_contract_payment` VALUES (811, '1.64888141061537e18', '甲方在2021年9月15日前向乙方支付合同费用总额的50%', '50', '409400', '2021-09-15', NULL);
INSERT INTO `cmc_contract_payment` VALUES (812, '1.64888141061537e18', '4.剩余合同费用总额的30%（即245640.00元，大写人民币贰拾肆万伍仟陆佰肆拾元元整）甲方于2021年12月31日前付清。', '30', '245640', '2021-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (813, '1.64888141061418e18', '乙方向甲方提交全部河道划定成果并按上级要求完成全部服务内容后，甲方根据本项目三台县财政专项预算经费到位情况支付服务费。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (814, '1.64888141060983e18', '乙方提交简阳市东溪街道星光社区砂石资源储量服务项目砂石资源量估算报告后，甲方收到简阳市财政局拨款后立即支付给乙方。甲方付款前，乙方需提供满足甲方要求的等额增值税专用发票。', '100', '276800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (815, '1.64888141059791e18', '合同签订后15个工作日内，甲方向乙方支付首付款。首付款为合同总金额的30%', '30', '163350', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (816, '1.64888141059791e18', '2021年11月底前，甲方向乙方支付第一次进度款。', NULL, NULL, NULL, '第一次进度款=（监理服务单价×地下管线实际提交长度）×60%-首付款，若第一次进度款计算为零或负数，则不支付。第一次进度款中实际提交长度为经乙方检查合格的管线长度。');
INSERT INTO `cmc_contract_payment` VALUES (817, '1.64888141059791e18', '探测单位将管线普查成果全部提交完毕并经测绘成果质量检验机构检验合格后，甲方于15个工作日内向乙方支付第二次进度款。', NULL, NULL, NULL, '第二次进度款=（监理服务单价×地下管线实际提交长度）×80%-首付款-第一次进度款，若第二次进度款计算为零或负数，则不支付。第二次进度款中实际提交长度为经质量检验合格后的管线长度。');
INSERT INTO `cmc_contract_payment` VALUES (818, '1.64888141059791e18', '全部管线普查成果完成整合检查、汇交入库，且项目通过验收后60个工作日内甲方向乙方支付尾款。', NULL, NULL, NULL, '尾款=合同总金额-首付款-第一次进度款-第二次进度款。');
INSERT INTO `cmc_contract_payment` VALUES (819, '1.64888141058498e18', '项目完成并提交给业主方验收后，甲方在7个工作日内支付全部款项。', '100', NULL, NULL, '乙方提交成果时间：要求在签订合同、外业观测结束之后10个工作日内完成。 ');
INSERT INTO `cmc_contract_payment` VALUES (820, '1.64888141058383e18', '第一阶段：乙方进场开展工作后 10个工作日内', '25', '1162500', '2020-04-30', '第一阶段：乙方进场开展工作后 10个工作日内，甲方向乙方支付至该标段投标控制价总金额的25%，即116.25万元（大写：壹佰壹拾陆万贰仟伍佰元整）；');
INSERT INTO `cmc_contract_payment` VALUES (821, '1.64888141058383e18', '第二阶段：外业测绘工作完成内业资料制作完成，并完成现场公示和修改工作。甲乙双方及监理共同核对乙方实际测量户数，并按中标单价264元每户计算总金额；结合第一阶段已付金额，甲方向乙方支付至实际总金额60%（含第一阶段的付款）。', '35', '1627500', NULL, '第二阶段：外业测绘工作完成内业资料制作完成，并完成现场公示和修改工作。甲乙双方及监理共同核对乙方实际测量户数，并按中标单价264元每户计算总金额；结合第一阶段已付金额，甲方向乙方支付至实际总金额60%（含第一阶段的付款）。');
INSERT INTO `cmc_contract_payment` VALUES (822, '1.64888141058383e18', '第三阶段：乙方工作通过州、省级核查验收并完成数据质检和数据入库后，并依法完成颁证后10个工作日内，甲方向乙方支付至实际总金额的90% ；', '30', '1395000', NULL, '第三阶段：乙方工作通过州、省级核查验收并完成数据质检和数据入库后，并依法完成颁证后10个工作日内，甲方向乙方支付至实际总金额的90% ；');
INSERT INTO `cmc_contract_payment` VALUES (823, '1.64888141058383e18', '第四阶段：缺陷修复期一年满后，支付实际总金额剩余10%款项。', '10', '465000', NULL, '第四阶段：缺陷修复期一年满后，支付实际总金额剩余10%款项。');
INSERT INTO `cmc_contract_payment` VALUES (824, '1.64888141058312e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '103144', '2020-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (825, '1.64888141058276e18', '本合同签订后十五日内，甲方支付乙方合同总价款的80%', '80', '957600', '2022-05-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (826, '1.64888141058276e18', '项目基本完成，甲方支付乙方合同总价款的15%', '15', '179550', '2022-12-10', NULL);
INSERT INTO `cmc_contract_payment` VALUES (827, '1.64888141058276e18', '乙方向甲方交付所有项目成果，并经甲方验收合格后土日内，甲方支付乙方人民币（大写）伍万玖仟捌佰伍拾元整（即59850元）。', '5', '59850', '2022-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (828, '1.64888141057868e18', '合同签订后15个工作日支付合同总额的30%', '30', '274800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (829, '1.64888141057868e18', '提交成果后15个工作日支付合同总额的60%', '60', '549600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (830, '1.64888141057868e18', '竣工验收合格结算后5个工作日支付合同总额的10%', '10', '91600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (831, '1.64888141057446e18', '合同签订后，乙方开具全额合同价的专用增值税发票，人 员及设备进场开展技术服务完成项目的 50%并提供相关资料，甲', '50', '647014.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (832, '1.64888141057446e18', '服务工作结束并经甲方验收合格后，乙方按合同规定提供 甲方所需资料（纸质版和电子版），60 日内甲方支付合同金额', '50', '647014.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (833, '1.64888141057255e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '24600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (834, '1.64888141057255e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (835, '1.64888141057125e18', '第一年完成外业测绘并验收合格后支付第一年拨付款（40%）的合同价款的30%', '8', '476528', NULL, '资金按三年分期拨付，第一年拨付40%，第二年拨付30%，第三年拨付30%。');
INSERT INTO `cmc_contract_payment` VALUES (836, '1.64888141057125e18', '第一年完成权籍调查和资料收集后支付第一年拨付款（40%）的合同价款的20%', '8', '476528', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (837, '1.64888141057125e18', '第一年建立不动产数据库并整合到已有的不动产数据库且发证量不低于应发证量的90%后支付第一年拨付款（40%）的合同价款的30%', '12', '714792', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (838, '1.64888141057125e18', '第一年完成资料整理和移交，验收合格后支付第一年拨付款（40%）的合同价款的20%。', '8', '476528', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (839, '1.64888141057125e18', '第二年拨付款（30%）和第三年拨付款（30%）分别每年年底支付。', '30', '1786980', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (840, '1.64888141057125e18', '第二年拨付款（30%）和第三年拨付款（30%）分别每年年底支付。', '30', '1786980', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (841, '1.64888141057016e18', '由甲方核对乙方每三个月实际发生的工作量（以出具正式盖章的测绘报告书的全额结算，出具初稿报告的按90%结算）并经甲方确认后，甲方在十五个工作日内向乙方支付相关费用。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (842, '1.6488814105688e18', '乙方完成项目的竣工图编制及工程量复核全部工作，按要求提交相关资料，并且通过项目初步验收后三个月内，甲方一次性付清乙方全部服务费用', '100', '49000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (843, '1.64888141056509e18', '乙方完成半年合同期内安全监测工作，提交每期安全监测报告后，甲方向乙方支付年度合同总价的50%，付款前，乙方提供等额的增值税专用发票（税率6%)，付款申请。', '50', '227209', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (844, '1.64888141056509e18', '按照合同约定，完成剩余半年安全监测工作，提交最终测量报告后一月内，甲方支付乙方合同总价的50%，付款前，乙方提供等额的增值税专用发票（税率6%)，付款申请。', '50', '227209', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (845, '1.64888141056302e18', '乙方完成所有航测工作并提交给甲方验收后支付合同总金额的50%', '50', '62500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (846, '1.64888141056302e18', '初步设计文件通过业主组织的审查后支付合同总金额的30%', '30', '37500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (847, '1.64888141056302e18', '施工图设计文件通过业主组织的审查后支付剩余款项。', '20', '25000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (848, '1.64888141056128e18', '本合同在乙方提交工作范围内的所有中间成果资料后，甲方向乙方支付进度款（合同额的80%）', '80', '37600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (849, '1.64888141056128e18', '乙方全部完成任务，提交的相应产品经甲方验收合格，即可办理结算手续。结算款（合同额的20%）', '20', '9400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (850, '1.64888141056008e18', '本工程进度款为月结算总价的80%，甲方在收到乙方提交的工程量付款证书、盖有乙方公司财务章的有效财务收据、已完工程价款100%的增值税专用发票，审核无误后40天内，按照甲方确认的上月已完工程价款的80%向乙方支付工程进度款，工程进度款支付不超过合同总价的80%。', '80', '780160', NULL, '本工程进度款为月结算总价的80%');
INSERT INTO `cmc_contract_payment` VALUES (851, '1.64888141056008e18', '合同工程完毕通过质监、建设部门等验收及甲方完工验收，甲方凭乙方提交的盖有乙方公司财务章的有效财务收据、完工验收证明及其它验收证明文件、已完工程价款100%的增值税专用发票，40天内支付合同结算总价的100%。', '20', '195040', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (852, '1.64888141055974e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方审核完毕后一次性结算付款。', '100', '151900', '2021-04-30', '质量保证金（总金额的3%）从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。');
INSERT INTO `cmc_contract_payment` VALUES (853, '1.64888141055631e18', '本合同费用采用一次性结算支付的方式，乙方完成合同约定全部工作后，将竣工结算所需的各项资料（主要包括但不限于：验收表、资料提供单、归档产品交接清单、辅助工作费相应的支持性资料等）整理成正式的结算报告，向甲方提出结算申请。甲方在收到业主相应付款后，根据合同价款及调整、质量条款规定、违约责任等，在规定时间内办理完成合同结算手续。', '100', '788500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (854, '1.64888141055468e18', '乙方交付成果资料后，甲方一次性支付所有合同款项。', '100', '119700', '2020-08-30', '乙方交付成果资料后，甲方一次性支付所有合同款项。乙方应开具相应金额的增值税普通发票。');
INSERT INTO `cmc_contract_payment` VALUES (855, '1.64888141055288e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方审核完毕后一次性结算付款', '100', '65800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (856, '1.64888141054902e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后30个工作日内以银行转账或银行汇票的方式进行支付。', '100', '210025.17', '2023-03-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (857, '1.64888141054902e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (858, '1.64888141054859e18', '工作完成后，结算时甲方支付乙方结算总费用的90％', '90', '532888.2', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (859, '1.64888141054859e18', '乙方提交甲方归档后三个月内未出现质量问题，甲方支付乙方10%工程质量保证金', '10', '59209.8', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (860, '1.64888141054529e18', '本项目测绘费待乙方进场开始测量工作时支付50%作为项目启动资金', '50', '188539.28', '2021-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (861, '1.64888141054529e18', '剩余50%待乙方提交全部成果并经过甲方及相关业务审批部门通过后，5个工作日内一次性支付', '50', '188539.28', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (862, '1.64888141054268e18', '本合同签订生效后，甲方向乙方支付合同总价的30%', '30', '366810', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (863, '1.64888141054268e18', '乙方向甲方提交中间成果报告后，甲方向乙方支付合同总价的30%', '30', '366810', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (864, '1.64888141054268e18', '本项目最终成果报告经甲方验收合格后，甲方向乙方支付合同总价的40%', '40', '489080', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (865, '1.64888141054084e18', '资金按三年分期拨付，第一年拨付40%。', '40', '2382640', '2020-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (866, '1.64888141054084e18', '资金按三年分期拨付，第二年拨付30%。', '30', '1786980', '2021-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (867, '1.64888141054084e18', '资金按三年分期拨付，第三年拨付30%。', '30', '1786980', '2022-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (868, '1.6488814105374e18', '合同首笔款，补齐2019年9月至2020年2月的成果以及2020年3、4两次成果数据/资料', '25', '75000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (869, '1.6488814105374e18', '合同进度款，提交累计共6次成果数据/资料', '25', '75000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (870, '1.6488814105374e18', '合同进度款，提交累计共10次成果数据/资料', '25', '75000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (871, '1.6488814105374e18', '合同进度款，提交累计共12次成果数据/资料', '25', '75000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (872, '1.64888141053433e18', '合同签订后，承包方完成控制测量工作，委托方验收合格后支付全部费用。', '100', '40000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (873, '1.64888141053232e18', '合同签订后，乙方开具全额合同价的专用增值税发票，人 员及设备进场开展技术服务完成项目的 30%并提供相关资料，甲', '30', '378861.6', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (874, '1.64888141053232e18', '技术服务完成项目的 40%并提供相关资料， 甲方支付合', '40', '505148.8', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (875, '1.64888141053232e18', '服务工作结束并经甲方验收合格后，乙方按合同规定提 供甲方所需资料（纸质版和电子版），60日内甲方支付合同金额的30%给乙方   。', '30', '378861.6', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (876, '1.6488814105147e18', '合同签订5个工作日内支付本合同总金额的30%', '30', '862800', '2021-03-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (877, '1.6488814105147e18', '完成内外业测绘并取得四川省第二测绘工程院数据预检报告支付本合同总金额的40%', '40', '1150400', '2021-04-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (878, '1.6488814105147e18', '完成所有工作内容并提交资料支付本合同总金额的20%', '20', '575200', '2021-05-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (879, '1.6488814105147e18', '项目验收合格后支付本合同总金额的10%', '10', '287600', '2021-06-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (880, '1.64888141051006e18', '合同费用在单项工程合同中明确。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (881, '1.64888141051006e18', '费用支付方式在单项工程合同中明确。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (882, '1.64888141050753e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '135002.96', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (883, '1.64888141050753e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (884, '1.64888141050718e18', '原则上每期的监测任务完成周期不超过一年，完成当期监测任务，提交当期 监测年度报告(盖章版),并提供支付申请报告及符合甲方要求的合法增值税专 用发票等资料后30个工作日内，甲方支付当年度变形监测费用。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (885, '1.64888141050718e18', '最后一期支付 前应办理完成合同结算。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (886, '1.64888141050092e18', '合同双方签字生效三日内，甲方付乙方全款', '100', '22000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (887, '1.64888141049876e18', '分包人航飞外业结束，经发包人认可后 20 天内，支付分包 人合同金额的15%；', '15', '315000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (888, '1.64888141049876e18', '分包人提交测量成果，经发包人认可后20天内，支付分包人合同金额的 25%；', '25', '525000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (889, '1.64888141049876e18', '分包人提交的测量成果通过重庆市第三方质量检查，发包人30天内支付分包人合同金额的50%；', '50', '1050000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (890, '1.64888141049876e18', '通过发包人最终验收后，支付合同金额 10%。 ', '10', '210000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (891, '1.64888141049815e18', '完成勘测定界报告后，满足甲方要求，收到增值税发票审核无误后，30个工作日内支付合同总价的20%。', '20', '128000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (892, '1.64888141049815e18', '完成地籍测绘报告后，满足甲方要求，收到增值税发票审核无误后，30个工作日内支付合同总价的20%。', '20', '128000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (893, '1.64888141049815e18', '完成实测地形图工作并提供实测地形图后，收到增值税发票审核无误后，30个工作日内支付合同总价的20%。', '20', '128000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (894, '1.64888141049815e18', '完成土地出让报告以及土地出让阶段全部相关测绘工作后，满足甲方要求，收到增值税发票审核无误后，30个工作日内支付合同总价的40%。', '40', '256000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (895, '1.64888141049815e18', '支付上述每一笔款项前乙方须向甲方提交相应金额税率为6%合格的增值税专用发票。增值税专用发票税率为6%（若国家税收政策发生变化，在不含税价不变的基础上，按国家最新政策执行）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (896, '1.6488814104974e18', '工程完成提交所有资料后，经甲方验收合格，支付总合同额60%的工程款', '60', '214740', '2020-09-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (897, '1.6488814104974e18', '余款40%及实际工作量剩余结算额作为质保金，待项目完成后无质量问题一年后支付。', '40', '143160', '2021-09-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (898, '1.64888141049019e18', '乙方出具该项目的正式勘测定界报告后，甲方支付乙方合同总价的30%', '30', '53250', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (899, '1.64888141049019e18', '乙方取得四川省人民政府对该项目的用地批复后，甲方支付乙方合同总价的40%', '40', '71000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (900, '1.64888141049019e18', '乙方取得该项目的不动产登记证后，甲方支付乙方合同总价的30%', '30', '53250', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (901, '1.64888141048691e18', '2020年12月31日前，提交规划送审稿，支付合同金额的 60%', '60', '94800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (902, '1.64888141048691e18', '2021年4月30日前，规划编制成果通过专家论证评审，并通过本级人民政府批准印发实施和上一级测绘地理信息主管部门备案后支付合同金额的40%。', '40', '63200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (903, '1.6488814104844e18', '具体支付申请及支付方式按主合同标准执行。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (904, '1.64888141048229e18', '合同签订后，乙方一向甲方提供项目的增值税发票，甲方在 60 个工作日内向乙方一（广东联合金地不动产评估勘测设计有限公司）支付合同金额的 30%', '30', '94392', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (905, '1.64888141048229e18', '完成所有外业工作，对拟登记的自然资源的自然状况、权属状况、关联信息等进行公示后，乙方一向甲方提供项目的增值税发票，甲方在 60 个工作日内向乙方一（广东联合金地不动产评估勘测设计有限公司）支付合同金额的 30%', '30', '94392', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (906, '1.64888141048229e18', '待完成全部确权工作并通过验收后，乙方一向甲方提供项目的增值税发票，甲方在 60 个工作日内向乙方一（广东联合金地不动产评估勘测设计有限公司）支付合同金额的 40%', '40', '125856', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (907, '1.64888141048027e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '132996.25', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (908, '1.64888141048027e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (909, '1.64888141047761e18', '合同签订并完成全部外业工作后，乙方向甲方提出支付申请，甲方接到乙方支付申请后30天内向乙方支付合同总费用的40%。', '40', '2099246.9', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (910, '1.64888141047761e18', '外业工作完成并提交初步成果后，乙方向甲方提出支付申请，甲方接到乙方支付申请后30天内向乙方支付合同总费用的30%。', '30', '1574435.17', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (911, '1.64888141047761e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同结算款的支付除应扣减质量保证金（合同结算总额的3%）外,还应扣减因按“乙方违约”条款的约定应扣减的工作量或违约金，在1月内将余款支付给乙方。', '27', '1416991.65', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (912, '1.64888141047761e18', '本合同暂扣合同总费用3%作为质量保证金，测绘成果验收后，无质量问题，半年后无息全额返还。', '3', '157443.52', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (913, '1.64888141047385e18', '完成泸县2021年耕地“进出平衡”目标考核整改专项工作，成果纳入泸县2021年度国土变更调查“二上”成果，通过省级检查、自然资源部最终质量检查并确认（国家核查），并按要求提供成果（数据、台账等）支付合同金额的95％', '95', '674500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (914, '1.64888141047385e18', '余款在2021年度国土变更成果通过自然资源部最终质量检查（国家核查）合格后一年内无质量问题，无息付清。', '5', '35500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (915, '1.64888141047126e18', '项目合同签订后，人员入场7日内采购人向中标供应商支付50万元做为项目启动资金', NULL, '500000', '2020-05-31', '项目合同签订后，人员入场7日内采购人向中标供应商支付50万元做为项目启动资金；然后每个年度5月30日和11月30日以前，按实际工作量和中标单价计算测绘经费（结算费用包含前期支付的项目启动资金）。');
INSERT INTO `cmc_contract_payment` VALUES (916, '1.64888141047126e18', '按实际工作量和中标单价计算测绘经费', NULL, NULL, '2021-05-30', '每个年度5月30日和11月30日以前，按实际工作量和中标单价计算测绘经费（结算费用包含前期支付的项目启动资金）。');
INSERT INTO `cmc_contract_payment` VALUES (917, '1.64888141047126e18', '按实际工作量和中标单价计算测绘经费', NULL, NULL, '2020-11-30', '每个年度5月30日和11月30日以前，按实际工作量和中标单价计算测绘经费（结算费用包含前期支付的项目启动资金）。');
INSERT INTO `cmc_contract_payment` VALUES (918, '1.64888141046829e18', '乙方内、外业全面完成提交成果资料，并通过四川省煤田测绘工程院验收和不动产登记中心认可采用后，甲方对乙方实际完成工作量办理据实结算，并同时将合同款项一次性全额支付乙方。', '100', '69930', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (919, '1.6488814104619e18', '完成河湖管理范围划定成果并通过专家评审合格后，甲方按程序向乙方支付合同价款的70％', '70', '978236', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (920, '1.6488814104619e18', '项目验收合格并通过审计后，乙方向甲方缴纳合同价款的5％的质量保证金，甲方按程序向乙方一次性支付该项目余款', '25', '349370', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (921, '1.6488814104619e18', '质保期满一年后，乙方凭票据到甲方退领质量保证金。', '5', '69874', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (922, '1.64888141046135e18', '合同费用经甲方审核完毕后，乙方向甲方提交相应金额增值税专用发票，甲方视项目业主付款情况，经甲方审核无误后30个工作日内支付。', '100', '71371.03', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (923, '1.64888141046135e18', '本合同项下计价和支付均采用人民币，买方将以银行汇款、银行承兑汇票、电建融信及银行开具的供应链金融业务产品等支付方式，银行承兑汇票、电建融信及银行开具的供应链金融业务产品不超过1年期。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (924, '1.64888141046135e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (925, '1.64888141044719e18', '甲方向乙方一次性支付项目费用422209.62元', '100', '422209.62', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (926, '1.648881410443e18', '乙方完成所有土地核勘工作且提交成果资料，整体通过验收后，甲方向乙方支付所有款项', '100', '193000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (927, '1.64888141044296e18', '由甲方核对乙方每三个月实际发生的工作量（以出具正式盖章的测绘报告书的全额结算，出具初稿报告的按90%结算）并经甲方确认后，甲方在十五个工作日内向乙方支付相关费用。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (928, '1.64888141044123e18', '合同签订后，甲方每期复测均需7日内支付预付款100000元', NULL, '100000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (929, '1.64888141044123e18', '项目完成后并通过评估后按实际测量数量支付余下款项。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (930, '1.64888141044123e18', '以后每次项目开始前支付预付款100000元，大写：壹拾万元整（人民币），并在项目完成并通过评估后按实际数量支付本次余下的所有款项。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (931, '1.64888141044118e18', '签订合同后，甲方在收到发票后30日内向乙方支付合同总价的30%', '30', '850909.03', '2020-09-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (932, '1.64888141044118e18', '完成项目验收合格后，甲方在收到发票后30日内向乙方支付合同总价的50%', '50', '1418181.71', '2020-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (933, '1.64888141044118e18', '合同总价的20%作为质保金，在项目完成验收后一年后支付', '20', '567272.68', '2021-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (934, '1.6488814104308e18', '提交测量成果资料以及结算资料后 15天内，甲方应一次性付清测量费用，并由乙方向甲方开具增值税专用发票和请款申请书进行收款。', '100', '3300', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (935, '1.64888141043043e18', '乙方提交成果经甲方提交给两江新区建设管理局验收合格并办理完毕合同结算后25个工作日内（且乙方提供足额合格发票），甲方一次性支付全部项目施工费用给乙方。', '100', '97780', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (936, '1.64888141042952e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '35000', NULL, '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。');
INSERT INTO `cmc_contract_payment` VALUES (937, '1.64888141042124e18', '甲方通知进场后支付合同总额34.00万元的20%', '20', '68000', NULL, '等待甲方的书面通知进场');
INSERT INTO `cmc_contract_payment` VALUES (938, '1.64888141042124e18', '乙方完成合同委托的全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。', '75', '255000', NULL, '根据双方签订的测绘合同完成情况，将完工结算所需的各项资料（主要包括但不限于：验收表、资料提供单、归档产品交接清单、等）整理成正式的结算报告，向甲方提出结算申请。');
INSERT INTO `cmc_contract_payment` VALUES (939, '1.64888141042124e18', '质量保证金返还', '5', '17000', NULL, '质量保证金从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。');
INSERT INTO `cmc_contract_payment` VALUES (940, '1.64888141041673e18', '取得施工图审查合格证、甲方收到业主方该笔付款、乙方提供甲方认可的合格支付凭证后20个工作日内', '45', '139275', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (941, '1.64888141041673e18', '取得施工图审查合格证和预算评审结果、甲方收到业主方该笔付款、乙方提供甲方认可的合格支付凭证后20个工作日内', '25', '77375', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (942, '1.64888141041673e18', '通过竣工验收 、甲方收到业主方该笔付款、乙方提供甲方认可的合格支付凭证后20个工作日内', '20', '61900', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (943, '1.64888141041673e18', '完成结算财审、甲方收到业主方该笔付款、乙方提供甲方认可的合格支付凭证后20个工作日内', '7', '21665', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (944, '1.64888141041673e18', '通过质保期后验收、甲方收到业主方该笔付款、乙方提供甲方认可的合格支付凭证后20个工作日内', '3', '9285', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (945, '1.64888141041652e18', '提交合格的测量成果结算后30日内一次性付清。', '100', '185000', '2020-06-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (946, '1.64888141041467e18', '合同签订生效后五日内，甲方支付预付款20%', '20', '700000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (947, '1.64888141041467e18', '乙方完成勘界测绘成果且经甲方组织验收合格后，甲方支付给乙方合同总价款的50%', '50', '1750000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (948, '1.64888141041467e18', '乙方完成桩、牌安装且经甲方组织验收合格后，甲方支付给乙方合同总价款的25%', '25', '875000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (949, '1.64888141041467e18', '保质期（一年）满后五日内一次性无息支付剩余金额5%', '5', '175000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (950, '1.64888141040788e18', '完成合同全部工作内容并经甲方验收合格，乙方可向甲方申请办理完工结算。合同费用经甲方审核完毕后一次性结算付款。', '100', '1299700', NULL, '质量保证金从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。');
INSERT INTO `cmc_contract_payment` VALUES (951, '1.64888141040725e18', '承包人向发包人提交成果并由发包人验收合格且满足政府相关部门要求后，发包人支付该部分测绘服务费（因时间周期较长，测绘费用可按测绘项目分次支付），承包人于付款前提供相应金额的增值税专用发票，税率 6 %。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (952, '1.64888141040012e18', '合同签订后7日内甲方向乙方支付合同总额的10%', '10', '405000', '2021-11-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (953, '1.64888141040012e18', '提交初步成果7日内，甲方向乙方支付合同总额的40%', '40', '1620000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (954, '1.64888141040012e18', '完成全套成果，经审查并验收合格后7日内，乙方一、乙方二按照实际完成工作量乘以单价得出结算总金额扣减已支付金额。甲方需按照乙方一、乙方二各自分工分别进行支付。', '50', NULL, NULL, '按照实际完成工作量乘以单价得出结算总金额扣减已支付金额。');
INSERT INTO `cmc_contract_payment` VALUES (955, '1.64888141039332e18', '合同生效后三十工作日内， 向乙方支付合同总价35%', '35', '692545', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (956, '1.64888141039332e18', '测绘主体工作结束并通过甲方验收后3个月内，项乙方支付合同总价的55%', '55', '1088285', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (957, '1.64888141039332e18', '剩余本合同总价款的10%为乙方后续服务费用，在乙方完成项的 全部后续服务工作且甲方初设结果通过评审后三个月内支付。', '10', '197870', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (958, '1.64888141038971e18', '划界成果（讨论稿）提交评审通过后支付 60%', '60', '906108', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (959, '1.64888141038971e18', '划界工程验收合格， 划界成果经古蔺县总河长办审定通过后支付 40%', '40', '604072', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (960, '1.64888141038843e18', '完成河湖管理范围划定成果并通过专家评审合格后，甲方按程序向乙方支付合同价款的70％', '70', '978236', '2020-09-02', NULL);
INSERT INTO `cmc_contract_payment` VALUES (961, '1.64888141038843e18', '项目验收合格并通过审计后，乙方向甲方缴纳合同价款的5％的质量保证金，甲方按程序向乙方一次性支付该项目余款，质保期满一年后，乙方凭票据到甲方退领质量保证金。', '30', '419244', '2020-11-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (962, '1.64888141038216e18', '本合同签订生效后，甲方向乙方支付合同总金额的30%，即支付人民币1.6505万元（大写：壹万陆仟伍佰零伍元整）。', '30', '16505.1', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (963, '1.64888141038216e18', '乙方向甲方提交中间成果报告后，甲方向乙方支付合同总金额的30%，即支付人民币1.6505万元（大写：壹万陆仟伍佰零伍元整）。', '30', '16505.1', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (964, '1.64888141038216e18', '本项目最终成果报告经甲方验收合格后，甲方向乙方支付合同总金额的40%，即支付人民币2.2007万元（大写：贰万贰仟零柒元整）。', '40', '22006.8', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (965, '1.64888141037559e18', '乙方向甲方提交全部成果资料后，甲方按合同总价支付（即支付至100%）。（政府投资项目，具体支付时间以财政支付为准）', '100', '24420', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (966, '1.64888141037337e18', '合同签订后10 个工作日内支付合同暂估金额的30%', '30', '227040', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (967, '1.64888141037337e18', '乙方完成合同约定服务、提交最终成果并通过验收后，在收到乙方发票后10个工作日内，甲方按照实际测绘量×中选单价，据实结算并支付剩余价款。最终结算总金额不得超过本项目预算。', '70', '529760', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (968, '1.64888141036813e18', '按各项目执行情况分期支付，乙方按照项目要求开展相应工作，乙方按项目按要求完成服务进度后，根据完成的节点向甲方申请对应项目金额并提供符合税务规定的增值税专用发票，甲方在收到乙方提供的合格增值税专用发票后，支付对应款项，甲方对乙方支付对应项款的前提是甲方收到业主方相应款项，乙方承诺，因业主未支付甲方相应款项而造成甲方未能支付的，乙方不视为甲方违约，并且有义务配合甲方向业主主张双方共同的权益。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (969, '1.64888141036697e18', '在承包人向发包人提交测绘成果资料后十天内，发包人向承包人一次性付清全部费用。', '100', '269000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (970, '1.64888141036256e18', '本合同生效后，乙方完成界桩布置设计工作后，，甲方向乙方支付合同款价的20%', '20', '98600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (971, '1.64888141036256e18', '乙方完成界桩测设制作工作后，经甲方现场核实并签字确认后，乙方向甲方提出支付申请，甲方收到乙方支付申请后15天内向乙方支付合同价款的40%', '40', '197200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (972, '1.64888141036256e18', '乙方提供全部最终成果并通过甲方组织的验收后，乙方向甲方提出支付申请，甲方收到乙方支付申请后15天内向乙方支付合同价款的40%', '40', '197200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (973, '1.64888141035861e18', '在承包人完成外业测量工作，提交《新龙县安戈、耶勒克光伏电站工程地形图测绘工作中间成果》经发包人认可，并在收到承包人出具的相应金额的增值税发票后的28天内，发包人支付给承包人的金额为签约合同价格的40%', '40', '39200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (974, '1.64888141035861e18', '承包人完成全部测绘工作，提交《新龙县安戈、耶勒克光伏电站工程地形图测绘工作成果报告》经发包人认可，并在收到承包人出具的相应金额的增值税发票后的28天内，发包人支付给承包人的金额为签约合同价格的40%', '40', '39200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (975, '1.64888141035861e18', '在承包人完成了全部合同工作，最终测绘成果报告经审查验收合格后的42天（以发包人出具的最终成果验收合格证明的日期起算）内，发包人与承包人应办理合同最终结算手续。双方就最终结算没有异议并签字确认后的35天内，发包人将最终的合同价格减去累计已支付的金额后的余额支付给承包人', '20', '19600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (976, '1.64888141035793e18', '双方签订合同后10日内，甲方可向乙方支付合同总价的30%作为预付款（根据财政资金下达情况）。', '30', '3128580', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (977, '1.64888141035793e18', '乙方向甲方提交三台县水利基础空间布局规划、三台县“十四五”水利发展规划成果后7日内，甲方可向乙方支付合同总价的30%。', '30', '3128580', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (978, '1.64888141035793e18', '乙方向甲方提交三台县河湖岸线保护与利用规划成果后（完成全部服务内容）7日内，甲方可向乙方付清剩下的全部费用。', '40', '4171440', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (979, '1.64888141035407e18', '本合同在乙方提交工作范围内的所有中间成果资料后，甲方向乙方支付进度款（合同额的80%）', '80', '61600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (980, '1.64888141035407e18', '乙方全部完成任务，提交的相应产品经甲方验收合格，即可办理结算手续。结算款（合同额的20%）', '20', '15400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (981, '1.64888141035404e18', '乙方完成测量后，待甲方验收测绘成果合格，乙方提交全部测绘成果资料及开具发票给甲方，甲方向乙方一次性支付实际完成工作量金额。（最终支付时间以申请财政资金时批复为准）。', '100', '30600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (982, '1.64888141035055e18', '合同签订，且采购人收到发票后，达到付款条件起10日内，支付合同总金额的30.00%', '30', '702000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (983, '1.64888141035055e18', '完成大邑县农村乱占耕地建房问题整治技术服务并提交成果资料，且采购人收到发票后，达到付款条件起10日内，支付合同总金额的40.00%', '40', '936000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (984, '1.64888141035055e18', '供应商完成全部工作内容且通过验收，达到付款条件起10日内，支付合同总金额的30.00%', '30', '702000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (985, '1.64888141034843e18', '工程完成提交所有资料后，甲方先按合同价的30%付给乙方', '30', '66090', '2021-11-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (986, '1.64888141034843e18', '经验收合格，支付至实际完成总合同额80%的工程款（取整至千元）', '50', '110000', '2021-12-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (987, '1.64888141034843e18', '实际完成工作量余款20%作为质保金，待项目完成后无质量问题一年后支付', '20', '44210', '2022-11-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (988, '1.64888141033974e18', '由甲方核对乙方每三个月实际发生的工作量（以出具正式盖章的测绘报告书的全额结算）并经甲方确认后，甲方在十五个工作日内向乙方支付相关费用。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (989, '1.64888141033545e18', '合同签订后，河道管理范围划定报告完成后，通过县（市、区）水行政主管部门验收合格并报县（市、区）人民政府批准后支付合同金额的50%', '50', '327875', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (990, '1.64888141033545e18', '经市（州）水利局汇总后上报水利厅归档管理后支付合同金额的30%', '30', '196725', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (991, '1.64888141033545e18', '乙方完成河道管理线桩（牌）安装完成并经过相关验收后支付合同金额的15%', '15', '98362.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (992, '1.64888141033545e18', '剩余5%为质保金，项目完成后两年支付。', '5', '32787.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (993, '1.64888141033146e18', '乙方完成所有工作并提交成果后，甲方在收到乙方交成果后核实成果后统一', '100', '13440', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (994, '1.64888141033146e18', '乙方须向甲方出具相应合法有效的测绘技术服务增值税发票，甲方在收到发票后15日内支付给乙方相应费用。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (995, '1.64888141033055e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '189800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (996, '1.64888141033055e18', '本合同不扣减质量保证金（承包人承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (997, '1.64888141031934e18', '乙方取得四川省人民政府对该项目的建设用地批复后，甲方支付乙方合同总价的60%。', '60', '89040', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (998, '1.64888141031934e18', '乙方取得该项目的不动产登记证，甲方支付乙方合同总价的40%', '40', '59360', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (999, '1.64888141031285e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '70448.45', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1000, '1.64888141031285e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1001, '1.64888141030905e18', '本合同费用采用一次性结算支付的方式，乙方完成合同约定全部工作后，将竣工结算所需的各项资料（主要包括但不限于：验收表、资料提供单、归档产品交接清单、辅助工作费相应的支持性资料等）整理成正式的结算报告，向甲方提出结算申请。', '97', '29100', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1002, '1.64888141030905e18', '合同结算支付应扣减质量保证金（结算费用的3%）和因按“乙方违约”条款的约定应扣减的工作量或违约金，在1月内将余款支付给乙方。质量保证金从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '3', '900', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1003, '1.64888141030309e18', '协议约定的工程内容完成后15日内，甲方配合乙方人员办理完工结算手续，在乙方提供符合要求的增值税专用发票后，在14个工作日内支付。', '100', '193870.04', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1004, '1.64888141029973e18', '根据项目进度，甲方按照业主方付款进度，以合同费用为基数同比', '90', '358200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1005, '1.64888141029973e18', '项目实施完成且乙方提交成果通过甲方质量检查后，甲方按照业主', '10', '39800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1006, '1.64888141029973e18', '各阶段甲方支付费用前，乙方须向甲方提供相应金额合法有效的增', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1007, '1.6488814102974e18', '乙方向甲方提交埋设界桩的成果资料后十日内，甲方向乙方一次性付清全部费用。', '100', '39000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1008, '1.64888141029664e18', '合同签订后30日内，甲方向乙方支付合同暂定总金额的40%', '40', '684000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1009, '1.64888141029664e18', '乙方将管线普查成果全部提交完毕并经测绘成果质量检验机构检验合格后 10 日内，甲方向乙方支付合同暂定总金额的40%', '40', '684000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1010, '1.64888141029664e18', '全部普查成果完成整合检查、汇交入库，且项目通过最终验收后 10 日内甲方向乙方支付尾款。尾款=（全野外探测单价×全野外探测实际提交管线长度+内外业结合核实探测单价×内外业结合核实探测实际提交管线长度）-首付款-中期款，且尾款不超过合同暂定总金额的20%。', '20', '342000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1011, '1.64888141029111e18', '甲方根据合同约定分批支付合同价款。合同签订后 15 个工作日内甲方依据乙方开具的有效发票向乙方支付合同总价的 80％款项；', '80', '927760', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1012, '1.64888141029111e18', '完成所有监测工作并提交运行监测成果后 15 个工作日内甲方依据乙方开具的有效发票向乙方支付合同总价的 20％款项。', '20', '231940', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1013, '1.64888141028903e18', '最终成果通过相关技术审查后一次性支付全部费用。', '100', '50000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1014, '1.6488814102875e18', '合同费用经甲方对乙方提交的资料审核完毕且合格后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '97', '428158', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1015, '1.6488814102875e18', '质量保证金从甲方验收合格之日起算，若无质量问题，半年后无息全额返还。', '3', '13242', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1016, '1.64888141028255e18', '由甲方核对乙方每三个月实际发生的工作量（以出具正式盖章的测绘报告书的全额结算，出具初稿报告的按90%结算）并经甲方确认后，甲方在十五个工作日内向乙方支付相关费用。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1017, '1.64888141027085e18', '乙方完成项目的竣工图编制及工程量复核全部工作，按要求提交相关资料，并且通过项目初步验收后三个月内，甲方一次性付清乙方全部服务费用', '100', '20000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1018, '1.64888141027049e18', '自合同签订之日起5个工作日内甲方向乙方预付工程暂定总价款的50 %', '50', '165484.64', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1019, '1.64888141027049e18', '乙方完成全部测绘工作后向甲方交付完成委托事项的测绘成果，测绘成果经甲方确认后，且将测绘成果提交政府部门审批前，应通知甲方支付工程暂定总价的20%', '20', '66193.86', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1020, '1.64888141027049e18', '乙方自政府部门审批同意测绘成果之日起1个工作日内，根据实际工作量编制工程结算书。经甲、乙双方共同审定同意工程结算书后，乙方向甲方出具缴费通知书，作为结算依据。甲方自收到缴费通知书之日起30个工作日内向乙方支付剩余测绘工程费。', '30', '99290.78', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1021, '1.64888141026399e18', '提交测量成果资料以及结算资料后  30  天内，甲方应一次性付清测量费用。', '100', '8200', '2021-08-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1022, '1.64888141026272e18', '承包方完成全部测绘工作后向发包方交付完成委托事项的测绘成果，测绘成果经发包方确认后，且将测绘成果提交政府部门完成审批，承包方自政府部门审批同意测绘成果之日起提供等额的增值税专用发票给发包方。发包方一次性支付100%测绘工程费；', '100', '208800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1023, '1.64888141025649e18', '完成水利可研初稿通过相关水利行政主管部门审批、完成市政工程可研初稿通过相关行政主管部门审批、完成项目水资源论证报告并通过相关行政主管部门审批、完成项目水土保持方案报告并通过相关行政主管部门审批、银山路闸坝工程行洪论证及河势稳定分析报告并通过相关行政主管部门审批', '50', '81551.72', NULL, '依据乙方的申请，在甲方收到业主方相应的设计进度款后，甲方按本进度支付。');
INSERT INTO `cmc_contract_payment` VALUES (1024, '1.64888141025649e18', '经发改委审批立项后', '30', '48931.03', NULL, '同上');
INSERT INTO `cmc_contract_payment` VALUES (1025, '1.64888141025649e18', '协助完成政府专项债券发行，协助完成水利项目的初步设计、施工图设计后且所有资料全部移交甲方（含电子档）', '20', '32620.69', NULL, '同上');
INSERT INTO `cmc_contract_payment` VALUES (1026, '1.64888141025183e18', '按照本合同约定，在乙方交付每分项测绘成果时一次性足额支付该分项测绘服务费用。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1027, '1.64888141025087e18', '合同签订后，乙方测量工作完成，提交了电子文挡资料后，甲方一次性支付乙方合同经费人民币伍万元整（50000.00元）。', '100', '50000', '2020-06-15', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1028, '1.64888141025054e18', '合同签订之日起15个工作日之内支付合同金额的30%费用', '30', '688320', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1029, '1.64888141025054e18', '成果通过州级初审后，5个工作日内支付支付合同金额的30%费用', '30', '688320', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1030, '1.64888141025054e18', '成果通过四川省水利厅提交给国家水利部审核通过后并提交文本和硬盘各五套，并通过质检审核后5个工作日内支付合同金额的30%费用', '30', '688320', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1031, '1.64888141025054e18', '本项目完工经第三方审计完毕后，甲方向乙方联合体成员单位支付按最终审定金额预留10%的质保金价款', '10', '229440', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1032, '1.64888141024796e18', '在乙方按合同约定完成每一期工作，工作成果经业主方及甲方验收合格，并且甲方收到业主方支付该合同费用后，按照业主方向甲方支付费用的到款比例，同比例向乙方支付累计不超过本合同总价款的90%。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1033, '1.64888141024796e18', '剩余合同费用（本合同总价款的10%）为乙方后续服务费用。在乙方提交全部合格成果完成项目的全部后续服务工作并且经甲方和业主方验收合格，在甲方收到业主方支付该项目的全部合同费用后，甲方根据乙方实际完成的工作量及乙方履约质量与乙方进行结算。每笔费用支付前，乙方须向甲方提供书面支付申请报告，说明工作进度情况，经甲方审批同意后方可支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1034, '1.64888141024341e18', '费用支付方式在单项工程委托中明确', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1035, '1.64888141024102e18', '项目完成并提交数据成果后，经甲方验收合格后7个工作日内一次性支付全部款项，计250000.00元（大写：人民币贰拾伍万元整）。', '100', '250000', NULL, '在付款前，乙方开具与本合同工程价款等额的增值税专用发票，否则，甲方可暂缓付款，不视为违约。');
INSERT INTO `cmc_contract_payment` VALUES (1036, '1.64888141023958e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '33200', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1037, '1.64888141023391e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1038, '1.64888141023391e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1039, '1.64888141023099e18', '乙方向甲方提交埋设界桩的成果资料后十日内，甲方向乙方一次性付清全部费用。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1040, '1.64888141022779e18', '完成甲方指定的全部测绘工作提交成果资料后，按实际完成工作量*中标单价核算最终测绘费，一次性支付给乙方。', '100', NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1041, '1.64888141022546e18', '完成各县（市）州级核查并报省厅核查后，支付合同金额20%；', '20', '69800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1042, '1.64888141022546e18', '通过省级核查后支付合同金额的30%', '30', '104700', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1043, '1.64888141022546e18', '通过国家级核查工作后支付合同金额的40%', '40', '139600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1044, '1.64888141022546e18', '剩余10%在通过采购人验收后支付。', '10', '34900', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1045, '1.64888141022275e18', '乙方完成测量工作并移交测量成果后，甲方一次性支付给乙方。', '100', '25300', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1046, '1.64888141022026e18', '项目技术方案设计书提交后，甲方于5个工作日内确认（若超过5个工作日则视为确认通过），确认后10个日历日内支付合同总金额30%', '30', '195510', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1047, '1.64888141022026e18', '提交全部正射影像图成果后，甲方于5个工作日内完成验收（若超过5个工作日则视为验收通过），验收合格后10个日历日内支付剩余的合同款项，计合同总金额的70%', '70', '456190', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1048, '1.64888141021452e18', '乙方完成半年合同期内安全监测工作，提交每期安全监测报告后，甲方向乙方支付年度合同总价的50%', '50', '204907', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1049, '1.64888141021452e18', '按照合同约定，完成剩余半年安全监测工作，提交最终测量报告后一月内，甲方支付乙方合同总价的50%', '50', '204907', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1050, '1.64888141020034e18', '合同签订后10日内，甲方向乙方支付合同预估总金额的30 %', '30', '99000', '2021-11-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1051, '1.64888141020034e18', '乙方提交所有成果资料，并通过行业行政主管部门的普查成果验收，验收合格后30日，甲方向乙方支付项目结算总费用至80%', '50', '165000', '2022-01-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1052, '1.64888141020034e18', '结算时留取10%作为工程质量保证金，工作成果归档后一年内，乙方完成技术服务，且未出现质量问题，支付工程质量保证金。', '10', '33000', '2022-12-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1053, '1.64888141020034e18', '留取10%作为未到款保留金，甲方收取相关工作费用后，甲方向乙方支付未到款保留金。', '10', '33000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1054, '1.64888141019297e18', '乙方派人到场开展业务后，甲方在1个月内向乙方支付合同费用总额的20%，即165976.00元（大写人民币壹拾陆伍仟玖佰柒拾陆元整）', '20', '165976', '2020-06-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1055, '1.64888141019297e18', '甲方在2020年9月15日前向乙方支付合同费用总额的50%，即414940.00元（大写人民币肆拾壹万肆仟玖肆拾元整）；', '50', '414940', '2020-09-15', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1056, '1.64888141019297e18', '剩余合同费用总额的30%，即248964.00元（大写人民币贰拾肆万捌仟玖佰陆拾肆元整），甲方于2020年12月31日前付清。', '30', '248964', '2020-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1057, '1.64888141019185e18', '乙方提交本项目研究技术方案送审稿后，甲方向乙方支付合同总价的30%', '30', '143990.3', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1058, '1.64888141019185e18', '乙方完成合同约定的研究内容，提交相应成果报告并通过最终验收，完成资料归档后，甲方向乙方支付合同总价的70%', '70', '335977.36', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1059, '1.64888141018915e18', '合同签订并生效，乙方提出书面申请后14日内，甲方支付合同总额的25%的工程价款；', '25', '288625', '2020-07-30', '乙方及其派遣人员需在2020年7月30日完成甲方要求的工作内容。非因甲方原因延误工期的，工期不得顺延。');
INSERT INTO `cmc_contract_payment` VALUES (1060, '1.64888141018915e18', '所有飞行工作完成后，乙方提出书面申请后14日内，甲方支付合同总额的25%的工程价款；', '25', '288625', '2020-07-30', '乙方及其派遣人员需在2020年7月30日完成甲方要求的工作内容。非因甲方原因延误工期的，工期不得顺延。');
INSERT INTO `cmc_contract_payment` VALUES (1061, '1.64888141018915e18', '乙方在完成数据采集、激光点云数据处理、分类、正射影像图制作、1：2000地形图制作等工作并提交成果资料后，经甲方验收合格后21日内，甲方支付合同总额40%的工程价款；', '40', '461800', '2020-07-30', '乙方及其派遣人员需在2020年7月30日完成甲方要求的工作内容。非因甲方原因延误工期的，工期不得顺延。');
INSERT INTO `cmc_contract_payment` VALUES (1062, '1.64888141018915e18', '预留合同总额的10%作为质保金，一年后付清。', '10', '115450', '2020-07-30', '乙方及其派遣人员需在2020年7月30日完成甲方要求的工作内容。非因甲方原因延误工期的，工期不得顺延。');
INSERT INTO `cmc_contract_payment` VALUES (1063, '1.64888141018364e18', '完成外业测量工作，提交《西藏日喀则市聂拉木、定日风电场工程地形图测绘工作中间成果》经发包人认可，并在收到承包人出具的相应金额的增值税发票后的28天内，发包人支付给承包人的金额为签约合同价格的40%', '40', '80000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1064, '1.64888141018364e18', '完成全部测绘工作，提交《西藏日喀则市聂拉木、定日风电场工程地形图测绘工作成果报告》经发包人认可，并在收到承包人出具的相应金额的增值税发票后的28天内，发包人支付给承包人的金额为签约合同价格的40%', '40', '80000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1065, '1.64888141018364e18', '在承包人完成了全部合同工作，最终测绘成果报告经审查验收合格后的42天（以发包人出具的最终成果验收合格证明的日期起算）内，发包人与承包人应办理合同最终结算手续。双方就最终结算没有异议并签字确认后的35天内，发包人将最终的合同价格减去累计已支付的金额后的余额支付给承包人', '20', '40000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1066, '1.64888141017873e18', '①第一次预付款金额为相应预付款金额的50%，付款时间应在乙方提供履约保函、合同协议书签订，且甲方在收到业主单位相应款项后14天内予以支付。', '5', NULL, NULL, '设计预付款金额为合同暂定价格的10%，分2次支付给乙方。');
INSERT INTO `cmc_contract_payment` VALUES (1067, '1.64888141017873e18', '②第二次预付款金额为相应预付款金额的50%。付款时间需待乙方提交相应工作大纲并经甲方、业主单位审批同意后，由乙方提出书面申请，甲方在收到业主单位相应款项后14天内予以支付。', '5', NULL, NULL, '设计预付款金额为合同暂定价格的10%，分2次支付给乙方。');
INSERT INTO `cmc_contract_payment` VALUES (1068, '1.64888141017873e18', '各（专业、区段）工程勘察报告完成后、甲方收到业主方该笔付款、乙方提供甲方认可的合格支付凭证后20个工作日内', '30', NULL, NULL, '以业主方审核确认的勘察实际工作量计算的勘察费为计费依据');
INSERT INTO `cmc_contract_payment` VALUES (1069, '1.64888141017873e18', '各（专业、区段）工程开工后、甲方收到业主方该笔付款、乙方提供甲方认可的合格支付凭证后20个工作日内', '40', NULL, NULL, '以业主方审核确认的勘察实际工作量计算的勘察费为计费依据');
INSERT INTO `cmc_contract_payment` VALUES (1070, '1.64888141017873e18', '各（专业、区段）工程竣工（完工）结算、甲方收到业主方该笔付款、乙方提供甲方认可的合格支付凭证后20个工作日内', '20', NULL, NULL, '以业主方审核确认的勘察实际工作量计算的勘察费为计费依据');
INSERT INTO `cmc_contract_payment` VALUES (1071, '1.64888141016456e18', '乙方提交成果经甲方检验合格后，且乙方提供足额合格发票后二十个工作日内甲方一次性支付全部测绘费用。', '100', '226000', '2020-09-30', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1072, '1.64888141016302e18', '项目完成并提交给甲主方验收后，乙方开具与本合同总价等额的增值税普通发票，甲方在7日内支付全部款项。', '100', '99500', '2022-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1073, '1.64888141016287e18', '在出具正式的测绘报告后，经服务项目所在镇（街）拆迁办审核无误，由镇（街）拆迁办按相关财务规定向乙方支付相关款项。具体付款方式及相关费用标准按各镇（街）拆办与乙方所签署的服务合同约定执行。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1074, '1.64888141016287e18', '因各镇（街）拆迁办使用的是财政资金，各镇（街）拆迁办在前款规定的付款时间为向政府采购支付部门提出办理财政支付申请手续的时间（不含政府财政支付部门审核的时间），在规定时间内提出支付申请手续后即视为各镇（街）拆迁办是按期支付。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1075, '1.64888141016221e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后 30 个工作日内支付。', '100', '467497.8', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1076, '1.64888141016221e18', '本合同不扣减质量保证金（乙方承诺：按本合同相关条款提交的测绘成果资料在后期的使用过程中，如发现存在质量问题，将无偿处理）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1077, '1.64888141016049e18', '提交合格的测绘资料成果后，乙方提供甲方认可的支付申请及增值税专业发票等合格支付凭证后30个工作日内，支付至合同价款的80%；', '80', '120000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1078, '1.64888141016049e18', '工程完工验收合格后，乙方提供甲方认可的支付申请及增值税专业发票等合格支付凭证后30个工作日内，支付至合同价款的100%。', '20', '30000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1079, '1.64888141014467e18', '自合同签订之日起5个工作日内甲方向乙方预付工程暂定总价款的50 %', '50', '123086.26', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1080, '1.64888141014467e18', '乙方完成全部测绘工作后向甲方交付完成委托事项的测绘成果，测绘成果经甲方确认后，且将测绘成果提交政府部门审批前，应通知甲方支付工程暂定总价的20%', '20', '49234.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1081, '1.64888141014467e18', '乙方自政府部门审批同意测绘成果之日起1个工作日内，根据实际工作量编制工程结算书。经甲、乙双方共同审定同意工程结算书后，乙方向甲方出具缴费通知书，作为结算依据。甲方自收到缴费通知书之日起30个工作日内向乙方支付剩余测绘工程费。', '30', '73851.75', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1082, '1.64888141014118e18', '乙方完成本合同项下全部工作，全部成果文件提交甲方且经甲方审核认定合格后7日内，甲方支付乙方合同总额的70%', '70', '189000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1083, '1.64888141014118e18', '剩余30%合同款作为考核费用，在项目竣工投产后根据考核情况7日内支付', '30', '81000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1084, '1.64888141013785e18', '完成全部测量标志普查维护工作后7日内支付合同价款的60%', '60', '537600', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1085, '1.64888141013785e18', '项目经上级部门验收合格，汇交成果资料后7日内支付合同价款的40%。', '40', '358400', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1086, '1.64888141013685e18', '乙方进场考察后，稻城县文化广播电视和旅游局第一期项目款到位后，且在乙方不存在违约行为的情况下，甲方向乙方支付人民币102000元。', NULL, '102000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1087, '1.64888141013685e18', '在乙方提交的稻城县地文景观、水域景观、生物景观、天象与气候景观四类旅游资源调查表通过稻城县文化广播电视和旅游局组织的审查，《稻城县文化旅游 资源普查报告》通过县级评审之后，稻城县文化广播电视和旅游局第二期设计费用到位后，且在乙方不存在违约行为的情况下，甲方向乙方支付人民币16.2万元', NULL, '162000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1088, '1.64888141013685e18', '在乙方提交的稻城县地文景观、水域景观、生物景观、天象与气候景观四类旅游资源调查表通过省级审查，《稻城县文化旅游资源普查报告》通过省级评审之后，稻城县文化广播电视和旅游局向甲方支付的第三期设计费到达甲方账户后，且在乙方不存在违约行为的情况下，甲方向乙方支付人民币21.6万元', NULL, '216000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1089, '1.64888141013685e18', '第四次在稻城县文化广播电视和旅游局退还履约保证金后，甲方向乙方支付人民币2万元', NULL, '20000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1090, '1.64888141013652e18', '合同签订后，甲方向乙方支付合同预估总金额的50%计人民币1.3万元（大写：壹万叁仟元整），作为工程预付款', '50', '13000', NULL, '工期要求：30日历天，提交前乙方须完成内部检查验收工作。');
INSERT INTO `cmc_contract_payment` VALUES (1091, '1.64888141013652e18', '乙方提交所有成果资料，并通过业主的验收，验收合格后10日，甲方向乙方支付项目结算总费用至100%', '50', '13000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1092, '1.64888141013468e18', '合同费用经甲方审核完毕后一次性结算付款，乙方向甲方提交相应金额增值税专用发票，经甲方审核无误后14个工作日内以银行转账或银行汇票的方式进行支付。', '100', '86800', '2020-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1093, '1.64888141013152e18', '政府采购合同签订生效后30日内，甲方向中标供应商支付合同总额的10%作为预付款', '10', '89625.6', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1094, '1.64888141013152e18', '中标供应商完成170平方公里的1:500数字线划图监理工作并经质检单位检验合格后，甲方向中标供应商支付合同总额的50%作为进度款', '50', '448128', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1095, '1.64888141013152e18', '中标供应商完成所有监理工作并经质检单位检验合格后，甲方向中标供应商支付合同总额的30%', '30', '268876.8', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1096, '1.64888141013152e18', '中标供应商向甲方提交最终成果文件并通过成都市规划和自然资源局验收后，甲方向中标供应商支付合同总额的10%尾款', '10', '89625.6', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1097, '1.64888141013052e18', '提交经审查合格的设计成果，乙方提供甲方认可的支付申请及增值税专业发票等合格支付凭证后30个工作日内，支付至合同价款的80%', '80', '564160', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1098, '1.64888141013052e18', '工程完工验收合格后，乙方提供甲方认可的支付申请及增值税专业发票等合格支付凭证后30个工作日内，支付至合同价款的100%', '20', '141040', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1099, '1.64888141012614e18', '签订合同后，10个工作日（且区财政资金到达甲方帐户）内甲方向乙方支付暂定合同总价30%预付款。', NULL, NULL, NULL, '合同总价=1.85元/平方米×实际工程量');
INSERT INTO `cmc_contract_payment` VALUES (1100, '1.64888141012614e18', '乙方向甲方提交全部成果资料后7个工作日（且区财政资金到达甲方帐户）内，甲方按最终合同总价(按测绘成果实际工作量*固定单价计算最终合同总价)支付全部款项（即支付至100%）。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1101, '1.64888141012547e18', '本合同签订生效后30日内，甲方向乙方支付合同暂定总价的50%作为预付款', '50', '2330000', '2022-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1102, '1.64888141012547e18', '乙方向甲方提交初步成果后30日内甲方向乙方支付合同暂定总价的40%作为中期款', '40', '1864000', '2022-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1103, '1.64888141012547e18', '乙方按时向甲方提交最终成果，达到成都市规划和自然资源局入库要求，且项目通过最终验收后30日内，根据实际工作量进行结算，甲方向乙方支付经结算确定的项目剩余尾款。', '10', '466000', '2022-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1104, '1.64888141012537e18', '乙方完成合同约定的基本农田补划方案编制，并完成方案听证、主管部门审查并通过，经甲方确认后一次性支付全部合同价款。', '100', '92500', NULL, '付款前，乙方应当向甲方提供合格、合法有效等额的增值税专用发票和相关请款报告。否则，甲方有权延迟付款，且不承担违约责任。双方在此确认，实际支付时，若发票税率与合同价使用税率不一致，则以不含税金额乘以（1+发票税率）作为支付金额。');
INSERT INTO `cmc_contract_payment` VALUES (1105, '1.64888141012464e18', '测绘成果验收合格后，甲方向乙方一次性支付按实际测绘工作量计算的项目费用95%金额的工程款', '95', '32708.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1106, '1.64888141012464e18', '剩余5%工程款作为质保金暂不支付，一年以后无质量问题甲方无息向乙方退还。', '5', '1721.5', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1107, '1.64888141012127e18', '项目完成并提交给甲主方验收后，乙方开具与本合同总价等额的增值税普通发票，甲方在7个工作日内支付全部款项', '100', '37000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1108, '1.64888141011875e18', '合同签订并生效，乙方提出书面申请后14日内，甲方支付合同总额的25%的工程价款', '25', '288625', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1109, '1.64888141011875e18', '所有飞行工作完成后，乙方提出书面申请后14日内，甲方支付合同总额的25%的工程价款', '25', '288625', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1110, '1.64888141011875e18', '乙方在完成数据采集、激光点云数据处理、分类、正射影像图制作、1：2000地形图制作等工作并提交成果资料后，经甲方验收合格后21日内，甲方支付合同总额40%的工程价款', '40', '461800', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1111, '1.64888141011875e18', '预留合同总额的10%作为质保金，一年后付清。', '10', '115450', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1112, '1.64888141011813e18', '2020年全面完成测绘、权籍调查、建立数据库并导入登记系统、完成登记发证率90%以上，完成数据汇交后支付合同结算金额的40%', '40', '3930880', '2020-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1113, '1.64888141011813e18', '2021年底以前支付合同结算金额的40%', '40', '3930880', '2021-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1114, '1.64888141011813e18', '2022年底以前支付合同结算金额的20%', '20', '1965440', '2022-12-31', NULL);
INSERT INTO `cmc_contract_payment` VALUES (1115, '1.64888141011699e18', '乙方完成本合同项下全部工作，全部成果文件提交甲方且经甲方审核认定合格后7日内，甲方支付乙方合同总额的70%', '70', '268100', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1116, '1.64888141011699e18', '剩余30%合同款在项目可行性研究报告编制完成后7日内支付。', '30', '114900', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1117, '1.64888141011536e18', '1.在合同生效之日起甲方收到乙方如下材料：1.项目实施计划书；2.40%等值专业发票；3.工作情况确认表；45 个工作日内，甲方向乙方支付技术服务报酬总额的40%', '40', '770000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1118, '1.64888141011536e18', '在乙方完成影像瓦片制作工作并提交成果数据及相关质检报告，成果满足甲方技术要求，甲方通过乙方提出的初验申请且收到相应金额的税务发票后 45 个工作日内，向乙方支付技术服务报酬的 50%', '50', '962500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1119, '1.64888141011536e18', '乙方完成项目，甲方向乙方出具竣工验收合格书面意见且收到剩余全部金额（包含质保金部分）的税务发票后三个月内，向乙方支付技术服务报酬的 10%', '10', '192500', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1120, '1.64888141011474e18', '完成协议全部工作内容并经甲方验收合格，且乙方向甲方开具协议总金额等额增值税专用发票后，30个工作日内向乙方支付本协议全部费用。', '100', '119000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1121, '1.64888141011317e18', '乙方提供的成果资料及工作量经甲方和建设单位审核后，甲方按照该 项目专项资金到位比例，通知乙方开具相应比例的正式发票，在甲方收到 发票20个工作日内，通过转账方式向乙方按专项资金到款进度等比例支付', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1122, '1.6488814101076e18', '本合同签订生效，乙方工作人员进场10日内并提供工作方案后，乙方向甲方提出支付申请，甲方接到乙方支付申请后15天内向乙方支付合同总费用的15%', '15', '615000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1123, '1.6488814101076e18', '乙方提供实物指标土地、零星树木及相关附属设施调查的初步成果资料，经甲方认可后，乙方向甲方提出支付申请，甲方接到乙方支付申请后15天内向乙方支付合同总费用的55%', '55', '2255000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1124, '1.6488814101076e18', '乙方提供经公示、确认后的实物指标土地、零星树木及相关附属设施调查成果，甲方接到乙方支付申请后15天内向乙方支付合同总费用的20%', '20', '820000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1125, '1.6488814101076e18', '乙方提供实物指标土地、零星树木及相关附属设施调查的最终成果资料并通过验收及移交，甲方接到乙方支付申请后15天内向乙方支付合同总费用的10%', '10', '410000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1126, '1.64888141010725e18', '完成泸县2022年度国土变更调查及日常变更举证完全，形成初始成果报省厅支付中标金额的60％', '60', '2736000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1127, '1.64888141010725e18', '年度变更调查成果通过省级检查、自然资源部最终质量检查（国家核查）并确认，并按要求提供成果（数据、台账、影像等）支付到总结算金额的95％', '35', '1596000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1128, '1.64888141010725e18', '余款在成果通过自然资源部最终质量检查（国家核查）合格后一年内无质量问题，无息付清。', '5', '228000', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1129, '1.64888141010348e18', '基本单价参照《重庆市勘测院外协项目单价表》, 按实际完成工作量结算。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1130, '1.64888141010348e18', '工程项目原则上每季度结算一次，结算后甲方按当期全部结算项目到款比例分批支付至乙方结算总费用的90%，余10%作为工程质量保证金。乙方提交甲方归档后一年内未出现质量问题，甲方支付乙方工程质量保证金。', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1131, '1.64888141010133e18', '当乙方完成本合同约定全部工作内容，并提交测绘成果资料后，根据现场实际完成工作量及合同单价，甲方向乙方支付结算金额的90%', '90', '872820', NULL, NULL);
INSERT INTO `cmc_contract_payment` VALUES (1132, '1.64888141010133e18', '经甲方依据本合同约定技术标准对测绘成果验收合格后，根据现场实际完成工作量及合同单价，甲方向乙方支付至结算金额的100%', '10', '96980', NULL, NULL);

-- ----------------------------
-- 37、cmc合同内容表
-- ----------------------------
drop table if exists `cmc_contract_work`;
create table `cmc_contract_work`  (
  `work_id` 			bigint not null  auto_increment comment '工作内容id',
  `contract_id` 		char(19)  		default null comment '合同id',
  `content` 			varchar(255)  	default null comment '工作内容',
  `scale` 				varchar(10)  	default null comment '等级或比例尺',
  `unit` 				varchar(10)  	default null comment '单位',
  `workload` 			varchar(10)  	default null comment '工作量',
  `deadline` 			date 			default null comment '要求完成时间',
  `remark` 				text  			default null comment '工作内容备注',
  primary key (`work_id`)
) engine = innodb comment = 'cmc合同内容表';

-- ----------------------------
-- 初始化-合同内容表数据
-- ----------------------------
INSERT INTO `cmc_contract_work` VALUES (1, '1658881414813722843', '首部枢纽区1:1000地形图', '1:1000', NULL, '27.9', NULL, '根据项目部要求分批次提供测量成果，进场后60天提交所有测量成果及报告。');
INSERT INTO `cmc_contract_work` VALUES (2, '1658881414813722843', '首部枢纽区1:1000水下地形图', '1:1000', NULL, '4.2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (3, '1658881414813722843', '墨脱一级厂址1:1000地形图', '1:1000', NULL, '7', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (4, '1658881414813722843', '墨脱一级厂址1:500地形图', '1:500', NULL, '5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (5, '1658881414813722843', '墨脱一级厂址1:500水下地形图', '1:500', NULL, '0.3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (6, '1658881414813722843', '墨脱二级厂房及三级调节池1:1000地形图测绘', '1:1000', NULL, '31.6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (7, '1658881414813722843', '墨脱二级厂房及三级调节池1:1000水下地形图测绘', '1:1000', NULL, '1.2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (8, '1658881414813722843', '墨脱三级厂址区1:1000地形图测绘', '1:1000', NULL, '15.1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (9, '1658881414813722843', '墨脱三级厂址区1:1000水下地形图测绘', '1:1000', NULL, '1.1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (10, '1658881414813722843', '白马西路河应急通道右岸1:2000地形图测绘补测', '1:2000', NULL, '11.1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (11, '1658881414813722843', '麦朗沟、吞白沟1:1000地形图测绘', '1:1000', NULL, '5.9', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (12, '1658881414813722843', '墨脱一级1#通风洞口1:1000地形图测绘', '1:1000', NULL, '0.2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (13, '1658881414813722843', '墨脱一级6#施工支洞口1:1000地形图测绘', '1:1000', NULL, '0.9', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (14, '1658881414813722843', '根阿日沟附近1:1000地形图测绘', '1:1000', NULL, '3.2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (15, '1658881414813722843', '阿甲日1:1000地形图测绘', '1:1000', NULL, '2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (16, '1658881414813722843', '格林附近1:1000地形图测绘', '1:1000', NULL, '13.6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (17, '1658881414813722843', '墨脱三级上厂址勘探便桥1:500地形测绘', '1:500', NULL, '0.7', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (18, '1658881414813722843', '四等GNSS测量(预估）', '四等', NULL, '9', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (19, '1658881414813722843', '四等三角高程测量（预估）', '四等', NULL, '70', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (20, '1658881410780762919', '开展勘测定界、土地性质调整、不动产测绘工作及其资料收 集整理，编制该项目勘测定界技术报告书与不动产测绘报告书，报送 相关主管部门审查并通过审查验收', NULL, NULL, NULL, NULL, '建设用地报批于签订合同后 60 个工作日内 完成资料编制组卷上报，最终以取得批文时间为准，取得批复后编制 不动产测绘报告，办理不动产登记证，最终以取得证书时间为准 。');
INSERT INTO `cmc_contract_work` VALUES (21, '1658881410780762919', '协助甲方在用地报批及不动产证 办理工作中的资料收集整理、组卷上报等技术支撑服务保障工作，最 终取得该项目变电站建设用地征地批复及变电站不动产登记证', NULL, NULL, NULL, NULL, '根据甲方要求安排日常工作 。');
INSERT INTO `cmc_contract_work` VALUES (22, '1658881410780762919', '临时用地编制临时用地复垦方案 并办理取得主管部门出具的变电站建设临时用地的临时用地手续 。', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (23, '1648881421276413954', 'E级GNSS控制测量', 'E级', '点', '20', NULL, '发包人向承包人提供所需基础资料后，承包人签订合同后30个工作日内完成相应工作内容并提交成果。');
INSERT INTO `cmc_contract_work` VALUES (24, '1648881421276413954', '水准测量（GPS拟合高程或四川省似大地水准面精化模型拟合高程）', '1:2000', 'km', '136', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (25, '1648881421276413954', '航摄像片控制点连测（含图根点测量）', '1:2000', 'km²', '34', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (26, '1648881421276413954', '1：2000数字线划专用图（DLG）', '1:2000', 'km²', '34', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (27, '1648881421276413954', '1:2000数字测绘（DOM+DEM模型数据）', '1:2000', 'km²', '68', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (28, '1648881421276413954', '管理线桩制作安装', NULL, '个', '80', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (29, '1648881421276413954', '告示牌制作安装', NULL, '个', '80', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (30, '1648881421276413954', '数据入库', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (31, '1648881419162484738', '堰塞体左岸清理后现状1:1000地形测量(含三维地形面）', '1:1000', 'km²', '0.39', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (32, '1648881419162484738', '白格堰塞体及上下游河段1:1000水下地形测量（含三维地形面）', '1:1000', 'km²', '0.2', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (33, '1648881419162484738', '坝区上围堰上游100m到尾水出口下游100m之间河段1:1000水下地形测量（含三维地形面）', '1:1000', 'km²', '0.1', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (34, '1648881419162484738', '白格堰塞体左右岸1:1000地形图更新补测', '1:1000', 'km²', '0.45 ', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (35, '1648881419162484738', '配合测量', NULL, '人.天', '33', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (36, '1648881419070210050', '四等GPS测量', '四等', '点', '8', NULL, '20天（从合同签订之日起算）。');
INSERT INTO `cmc_contract_work` VALUES (37, '1648881419070210050', '四等三角高程测量', '四等', 'km', '17.14 ', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (38, '1648881419070210050', '1:500水下地形图测绘', '1:500', 'km²', '1.477', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (39, '1648881419070210050', '1:500岸上地形图测绘', '1:500', 'km²', '2.957', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (40, '1648881419070210050', '料场1:2000地形地类图测绘', '1:2000', 'km²', '1.221', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (41, '1648881418923409409', '一等GNSS测量', '一等', '点', '8', '2022-03-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (42, '1648881418923409409', '三等GNSS测量', '三等', '点', '14', '2022-03-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (43, '1648881418923409409', '五等导线测量', '五等', 'km', '75.3', '2022-03-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (44, '1648881418923409409', '三等三角高程测量', '三等', 'km', '74.3', '2022-03-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (45, '1648881418923409409', '四等三角高程测量', '四等', 'km', '58.7', '2022-03-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (46, '1648881418923409409', '高精度卫星影像图收集及正射影像制作（分辨率优于1 m）', NULL, 'km²', '169.8', '2022-03-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (47, '1648881418923409409', '实控区1：10000地形图测绘及数字高程模型制作', '1:10000', 'km²', '37.43', '2022-03-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (48, '1648881418923409409', '控制薄弱区1：50000地形图制作及数字高程模型制作', '1:50000', 'km²', '103.17', '2022-03-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (49, '1648881418923409409', '重点河段1：2000地形图测量及数字高程模型制作', '1:2000', 'km²', '15.25', '2022-03-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (50, '1648881418923409409', '重点河段河道带状航图测绘及数字正射影像制作', '1:2000', 'km²', '15.25', '2022-03-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (51, '1648881418923409409', '界桩制作、运输及安装', NULL, '个', '312', '2022-03-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (52, '1648881418923409409', '墙式标志牌制作、运输和安装', NULL, '个', '10', '2022-03-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (53, '1648881418923409409', '界桩放线与测量', NULL, '点', '322', '2022-03-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (54, '1648881418910826498', '一等GNSS测量', '一等', '点', '2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (55, '1648881418910826498', '三等GNSS测量', '三等', '点', '29', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (56, '1648881418910826498', '五等导线测量', '五等', 'km', '65', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (57, '1648881418910826498', '三等三角高程测量', '三等', 'km', '55.7', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (58, '1648881418910826498', '四等三角高程测量', '四等', 'km', '62.3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (59, '1648881418910826498', '尼西坝址1:2000地形图测绘', '1:2000', 'km²', '1.223', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (60, '1648881418910826498', '尼西厂址1:2000地形图测绘', '1:2000', 'km²', '0.403', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (61, '1648881418910826498', '觉拉闸址1:5000地形图测绘', '1:5000', 'km²', '1.289', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (62, '1648881418910826498', '觉拉厂址1:5000地形图测绘', '1:5000', 'km²', '4.947', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (63, '1648881418910826498', '德吉坝址1:2000地形图测绘', '1:2000', 'km²', '0.898', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (64, '1648881418910826498', '德吉中坝址1:2000地形图测绘', '1:2000', 'km²', '1.260', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (65, '1648881418910826498', '准巴闸址1:2000地形图测绘', '1:2000', 'km²', '0.207', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (66, '1648881418910826498', '准巴厂址、阿吉（小）闸址1:2000地形图测绘', '1:2000', 'km²', '0.909', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (67, '1648881418910826498', '阿吉（大）厂址、玉麦闸址1:2000地形图测绘', '1:2000', 'km²', '1.426', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (68, '1648881418910826498', '斗玉闸址1:2000地形图测绘', '1:2000', 'km²', '0.460', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (69, '1648881418910826498', '玉麦厂址1:2000地形图放大', '1:2000', 'km²', '0.303', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (70, '1648881418910826498', '所有规划河道1:10000地形图测绘', '1:10000', 'km²', '387.37', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (71, '1648881418910826498', '1:10000纵断面测量（加波曲段）', '1:10000', 'km', '11.751', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (72, '1648881418910826498', '1:10000纵断面测量（洛曲段）', '1:10000', 'km', '59.827', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (73, '1648881418910826498', '1:10000纵断面测量（西巴霞曲段）', '1:10000', 'km', '86.874', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (74, '1648881418894049281', '三等GNSS测量', '三等', '点', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (75, '1648881418894049281', '重点灌区1:10000地形图', '1:10000', 'km²', '62.4', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (76, '1648881418894049281', '重点防洪治理区域1:5000地形图', '1:5000', 'km²', '0.473', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (77, '1648881418822746114', '1:2000水下地形图测绘', '1:2000', 'km²', '0.05', NULL, '合同工期：合同签订后约9日历天。');
INSERT INTO `cmc_contract_work` VALUES (78, '1648881418822746114', '1:2000岸上地形图测绘', '1:2000', 'km²', '0.3', NULL, '合同工期：合同签订后约9日历天。');
INSERT INTO `cmc_contract_work` VALUES (79, '1648881418793385986', '大岗山水电站黄草坪变形体实物指标调查测量配合', NULL, '人.天', '14', '2021-05-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (80, '1648881418764025857', '三等GPS测量', '三等', '点', '4', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (81, '1648881418764025857', '四等GPS测量', '四等', '点', '6', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (82, '1648881418764025857', '五等导线（代替四等三角高程）', '五等', 'km', '8', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (83, '1648881418764025857', '坝区1:500地形图测绘', '1:500', 'km²', '1.16', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (84, '1648881418764025857', '坝区1:500水下地形图测绘', '1:500', 'km²', '0.22', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (85, '1648881418764025857', '浸没区1:1000地形图测绘', '1:1000', 'km²', '1.35', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (86, '1648881418764025857', '库区1:2000地形图测绘', '1:2000', 'km²', '4.35', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (87, '1648881418764025857', '1:1000地形图缩编至1:2000地形图', '1:2000', 'km²', '1.35', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (88, '1648881418764025857', '1:500地形图缩编至1:2000地形图', '1:2000', 'km²', '0.3', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (89, '1648881418764025857', '坝区1:500三维地形面制作', '1:500', 'km²', '1.2', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (90, '1648881418764025857', '曾家沟1:5000地形图测绘', '1:5000', 'km²', '8.12', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (91, '1648881418764025857', '曾家沟1:1000地形图测绘', '1:1000', 'km²', '1.8', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (92, '1648881418696916993', '1:1000地形图测量', '1:1000', 'km²', '4.3', NULL, '合同签订并生效后10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (93, '1648881418696916993', '1:1000水下地形图测绘', '1:1000', 'km²', '0.23', NULL, '合同签订并生效后10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (94, '1648881418696916993', '料场1:1000地形图测绘', '1:1000', 'km²', '0.183', NULL, '合同签订并生效后10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (95, '1648881418696916993', '天然气管道测量(1:1000)', '1:1000', 'km', '0.8', NULL, '合同签订并生效后10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (96, '1648881418642391041', '五等控制点测量', '五等', '点', NULL, NULL, '乙方提交成果时间：要求在签订合同、外业观测结束之后10个工作日内完成。');
INSERT INTO `cmc_contract_work` VALUES (97, '1648881418642391041', '景区内规划1、2、3号用地约550亩土地1:500地形图测绘', '1:500', '亩', NULL, NULL, '乙方提交成果时间：要求在签订合同、外业观测结束之后10个工作日内完成。');
INSERT INTO `cmc_contract_work` VALUES (98, '1648881418608836610', '公路测量', NULL, 'km', '17.816', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (99, '1648881418592059394', '1:1000地形图补测', '1:1000', 'km²', '0.72', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (100, '1648881418592059394', '1:1000水下地形图测量', '1:1000', 'km²', '0.38', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (101, '1648881418592059394', '断面基点测量', NULL, '点', '22.0 ', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (102, '1648881418592059394', '1:1000横断面测量', '1:1000', 'km', '3.0', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (103, '1648881418592059394', '地形图及坐标点坐标转换', NULL, '点', '465.0', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (104, '1648881418575282177', '1:1000地形图测绘', '1:1000', 'km²', '0.50', '2020-08-22', NULL);
INSERT INTO `cmc_contract_work` VALUES (105, '1648881418575282177', '1:200横断面测量', '1:200', 'km', '3.6', '2020-08-22', NULL);
INSERT INTO `cmc_contract_work` VALUES (106, '1648881418575282177', '1:1000正射影像图DOM制作', '1:1000', 'km²', '0.5', '2020-08-22', NULL);
INSERT INTO `cmc_contract_work` VALUES (107, '1648881418575282177', '断面基点测量', NULL, '点', '36', '2020-08-22', NULL);
INSERT INTO `cmc_contract_work` VALUES (108, '1648881418524950530', '沿河道航拍视频拍摄', NULL, 'km', '41.12', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (109, '1648881418524950530', '定点位航拍全景图制作', NULL, '个', '5', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (110, '1648881418524950530', '三江汇流区无人机倾斜摄影', NULL, 'km²', '2', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (111, '1648881418524950530', '电站枢纽三维模型制作', NULL, '项', '1', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (112, '1648881418524950530', '三江汇流区电子沙盘制作', NULL, 'km²', '2', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (113, '1648881418524950530', '三江汇流区演示视频制作', NULL, '秒', '360', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (114, '1648881418411704322', '枢纽区1:500地形图测量', '1:500', 'km²', '1.1', NULL, '合同签订后6日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (115, '1648881418399121410', '番禺区62条河涌管网完善及农村生活污水查缺补漏工程控制测量、地形图测量、地形图补测修测以及坐标转化等工作及后期测量技术服务。', NULL, '项', '1', NULL, ' （1）合同工期：合同签订后 30 天（日历天）内提交全部测量成果；（2）后期服务时间：自合同签订之日起至项目完工为止，具体以甲方任务委托书的进度安排为准。');
INSERT INTO `cmc_contract_work` VALUES (116, '1648881418340401153', '羊湖电厂泵站进水渠1:1000地形地类图修正测绘', '1:1000', 'km²', '2.5', NULL, '合同签订后7日内完成。');
INSERT INTO `cmc_contract_work` VALUES (117, '1648881418340401153', '泵站进水渠下游侧雅江河道1:500断面测绘', '1:500', 'km', '2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (118, '1648881418327818241', '康生寺外部供水工程引水线路1:1000地形图测绘', '1:1000', 'km²', '0.26', NULL, '合同工期为合同签订后7日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (119, '1648881418327818241', '康生寺外部供水工程取水口1:500地形图测绘', '1:500', 'km²', '0.08', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (120, '1648881418327818241', '康生寺水厂1:500地形图测绘', '1:500', 'km²', '0.1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (121, '1648881418327818241', '大石凼居民点1:500地形图补测', '1:500', 'km²', '0.1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (122, '1648881418327818241', '年克寺对外连接道路1:1000地形图测绘', '1:1000', 'km²', '0.1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (123, '1648881418327818241', '松岗直波大地广场范围高程点测量', NULL, '点', '20', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (124, '1648881418290069506', '一等 GNSS 测量', '一等', '点', '8', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (125, '1648881418290069506', '三等 GNSS 测量', '三等', '点', '71', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (126, '1648881418290069506', '四等三角高程', '四等', 'km', '42.4', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (127, '1648881418290069506', '卫星影像购买', NULL, 'km²', '421.3', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (128, '1648881418290069506', '重点河段 1:2000 正射影像图 DOM 制作', '1:2000', 'km²', '29', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (129, '1648881418290069506', '重点河段 1:2000 数字高程模型 DEM 制作', '1:2000', 'km²', '29', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (130, '1648881418290069506', '重点河段 1:2000 地形图测绘', '1:2000', 'km²', '29', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (131, '1648881418290069506', '非重点河段 1:10000 正射影像图 DOM 制作', '1:10000', 'km²', '421.3', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (132, '1648881418290069506', '非重点河段 1:10000 数字高程模型 DEM 制作', '1:10000', 'km²', '421.3', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (133, '1648881418290069506', '非重点河段 1：10000 地形图测绘', '1:10000', 'km²', '421.3', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (134, '1648881418290069506', '河道大断面测量（1:2000）', '1:2000', 'km²', '62.4', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (135, '1648881418290069506', '水边线测量（1:2000）', '1:2000', 'km²', '3', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (136, '1648881418290069506', '界桩制作与安装', NULL, '个', '76', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (137, '1648881418290069506', '标示牌制作与安装', NULL, '个', '33', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (138, '1648881418290069506', '界桩、标示牌放样与测量', NULL, '个', '109', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (139, '1648881418273292290', '主要内容为卧龙湖东区基础测绘工作（其中包括：E级控制测绘、土地勘测定界测绘、1:500地形图修补测绘、项目区基本农田及林地情况图制作）。项目区测绘面积约15.25平方千米。', NULL, '项', '1', NULL, '服务期限：为签订合同后2年。');
INSERT INTO `cmc_contract_work` VALUES (140, '1648881418256515073', '水库区1:500地形图测绘', '1:500', 'km²', '11', NULL, '合同签订之日第二天起算20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (141, '1648881418256515073', '提灌站1:500地形图测绘', '1:500', 'km²', '0.16', NULL, '合同签订之日第二天起算20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (142, '1648881418256515073', '工程建设区1:500地形图测绘', '1:500', 'km²', '2.7', NULL, '合同签订之日第二天起算20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (143, '1648881418256515073', '水库区1:2000地形图修补测', '1:2000', 'km²', '0.06', NULL, '合同签订之日第二天起算20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (144, '1648881418227154945', '对色曲、伟曲、然乌湖进行河湖管理范围划界工作，主要工作内容包括前期协助甲方技术方案编制、技术咨询、全域控制测量（E级GPS测量、四等高程测量）、全域1:10000地形测绘（DLG、DEM、DOM及入库）、河道断面测量；相关报告编制、图集制作；协助甲方审查验收等工作。', NULL, '项', '1', '2020-10-20', '详见合同第二条“服务内容和服务标准”。');
INSERT INTO `cmc_contract_work` VALUES (145, '1648881418034216962', '溪洛渡水电站坝区已确权永久用地约20公里边界的界址实地测量及标示（包含后期周界围墙施工配合测量）', NULL, '项', '1', NULL, '2020年9月20日至2020年12月31日，具体开始时间以委托方通知为准。');
INSERT INTO `cmc_contract_work` VALUES (146, '1648881418034216962', '各标示点采用简易木桩或喷涂界标', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (147, '1648881418034216962', '标准界桩制安约600个', NULL, '个', '600', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (148, '1648881417971302402', '二等平面点选点和造埋（墩标）', '二等', '点', '1', '2020-12-20', '自合同签订之日起60个日历天完成，2020年 10月 21 日至2020年 12 月 20 日。');
INSERT INTO `cmc_contract_work` VALUES (149, '1648881417971302402', '三等平面点选点和造埋（地面标）', '三等', '点', '14', '2020-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (150, '1648881417971302402', '基本水准标石选点和造埋', NULL, '点', '6', '2020-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (151, '1648881417971302402', '普通水准标石选点和造埋', NULL, '点', '14', '2020-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (152, '1648881417971302402', '水准便道及临时便道修筑', NULL, '项', '1', '2020-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (153, '1648881417971302402', '二等GNSS测量', '二等', '点', '22', '2020-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (154, '1648881417971302402', '二等三角测量', '二等', '点', '16', '2020-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (155, '1648881417971302402', '二等边长测量', '二等', '条', '34', '2020-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (156, '1648881417971302402', '三等三角测量', '三等', '点', '38', '2020-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (157, '1648881417971302402', '三等边长测量', '三等', '条', '41', '2020-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (158, '1648881417971302402', '三等光电测距三角高程', '三等', 'km', '43', '2020-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (159, '1648881417971302402', '二等水准测量', '二等', 'km', '76', '2020-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (160, '1648881417862250498', '1:1000地形图测绘', '1:1000', 'km²', '0.25', NULL, '合同工期：合同签订日期第二天起算4日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (161, '1648881417862250498', '1:1000正射影像图DOM制作', '1:1000', '幅', '1', NULL, '合同工期：合同签订日期第二天起算4日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (162, '1648881417837084674', '五等GNSS测量', '五等', '点', '10', '2021-02-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (163, '1648881417837084674', '成德大道桥～成绵乐高铁桥河段1:1000地形图测绘', '1:1000', 'km²', '2.7', '2021-02-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (164, '1648881417837084674', '成德大道桥～成绵乐高铁桥河段1:1000水下地形图测绘', '1:1000', 'km²', '0.8', '2021-02-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (165, '1648881417837084674', '两闸址1:500地形图测绘（岸上）', '1:500', 'km²', '1.76', '2021-02-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (166, '1648881417837084674', '两闸址1:500地形图测绘（水下）', '1:500', 'km²', '0.41', '2021-02-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (167, '1648881417837084674', '堤防1:500横断面测量', '1:500', 'km', '71.5', '2021-02-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (168, '1648881417837084674', '堤防1:1000纵断面测量', '1:1000', 'km', '14.3', '2021-02-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (169, '1648881417837084674', '1:1000水文大断面测量', '1:1000', 'km', '15', '2021-02-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (170, '1648881417837084674', '水文断面基点测量', NULL, '点', '42', '2021-02-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (171, '1648881417837084674', '1:500三维模型', '1:500', 'km²', '2.5', '2021-02-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (172, '1648881417837084674', '1:1000三维模型', '1:1000', 'km²', '3', '2021-02-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (173, '1648881417807724546', '1:500水下地形图测绘', '1:500', 'km²', '3.0', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (174, '1648881417807724546', '1：500水面线复核', '1:500', 'km', '12', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (175, '1648881417807724546', '二等砼观测墩选点与造埋', NULL, '点', '10', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (176, '1648881417807724546', '混凝土基本水准标石选点与造埋', NULL, '点', '3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (177, '1648881417807724546', '普通水准标石选点与造埋', NULL, '点', '10', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (178, '1648881417807724546', '二等GPS测量', NULL, '点', '14', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (179, '1648881417807724546', '二等三角观测', NULL, '点', '5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (180, '1648881417807724546', '二等边测量', NULL, '条', '10', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (181, '1648881417807724546', '二等水准测量', NULL, 'km', '50', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (182, '1648881417807724546', '二等渡河水准测量', NULL, '处', '2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (183, '1648881417795141633', '引水闸枢纽1:500地形图测绘', '1:500', 'km²', '0.20', '2021-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (184, '1648881417769975809', '二等 GNSS 测量', '二等', '点', '58', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (185, '1648881417769975809', '四等 GNSS 测量', '四等', '点', '10', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (186, '1648881417769975809', '卫星影像购买', NULL, 'km²', '502.00', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (187, '1648881417769975809', '非重点河段 1:10000 正射影像图 DOM 制作', '1:10000', 'km²', '251', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (188, '1648881417769975809', '非重点河段 1:10000 数字高程模型 DEM 制作', '1:10000', 'km²', '251', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (189, '1648881417769975809', '非重点河段 1：10000 地形图测绘', '1:10000', 'km²', '251', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (190, '1648881417769975809', '河道大断面测量（1:2000）', '1:2000', 'km²', '18', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (191, '1648881417769975809', '断面基点测量', NULL, '点', '72', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (192, '1648881417769975809', '水边线测量（1:2000）', '1:2000', 'km²', '1', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (193, '1648881417769975809', '界桩制作与安装', NULL, '个', '95', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (194, '1648881417769975809', '标示牌制作与安装', NULL, '个', '26', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (195, '1648881417769975809', '界桩、标示牌放样与测量', NULL, '个', '121', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (196, '1648881417564454914', '平面地面标选点和建造', NULL, '座', '6', NULL, '项目实施前，完成测绘成果提交，合同签订后30个日历天内完成1#和2#支洞口施工控制网的建网及观测。');
INSERT INTO `cmc_contract_work` VALUES (197, '1648881417564454914', '三等GPS测量', '三等', '点', '7', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (198, '1648881417564454914', '三等三角观测', '三等', '点', '6', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (199, '1648881417564454914', '三等边长测量', '三等', '条', '6', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (200, '1648881417564454914', '三等三角高程测量', '三等', 'km', '5.19', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (201, '1648881417564454914', '施工支洞区转成国家2000大地坐标系', '1:2000', '点', '72', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (202, '1648881417472180225', '四等GNSS测量', '四等', '点', '8', '2021-01-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (203, '1648881417472180225', '四等三角高程测量', '四等', 'km', '10', '2021-01-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (204, '1648881417472180225', '坎娘碱性骨料场1:2000地形图测绘', '1:2000', 'km²', '1', '2021-01-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (205, '1648881417472180225', '雪巴滑坡1:2000地形图测绘', '1:2000', 'km²', '1.5', '2021-01-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (206, '1648881417367322626', '莫中坝水下1:500水下地形图测绘', '1:500', 'km²', '0.2558', NULL, '签订合同之日起至2020年12月15日前内全面完成工作内容并通过甲方验收。');
INSERT INTO `cmc_contract_work` VALUES (207, '1648881417367322626', '慈母溪渡口、雷中坝渡口 1:500水下地形图测绘', '1:500', 'km²', '0.6362', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (208, '1648881417044361218', '折多塘安置点1:500带状地形图', '1:500', 'km²', '0.232', NULL, '合同签订后15日内向甲方提交CZTL康定段拆迁安置折多塘安置点地形图测绘成果。');
INSERT INTO `cmc_contract_work` VALUES (209, '1648881417044361218', '引水线路1:1000地形图', '1:1000', 'km²', '0.25', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (210, '1648881417044361218', '1:200横断面测绘', '1:200', 'km', '0.4', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (211, '1648881417044361218', '五等GNSS控制点测绘', '五等', '点', '12', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (212, '1648881417006612482', '1:500倾斜摄影（无人机影像数据采集）', '1:500', 'km²', '5.5', '2021-07-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (213, '1648881417006612482', '1:500倾斜摄影三维影像模型制作', '1:500', 'km²', '5.5', '2021-07-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (214, '1648881417006612482', '正射影像大图制作（含地质灾害点标注）', '1:500', 'km²', '5.5', '2021-07-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (215, '1648881416792702977', '四等GNSS测量', '四等', '点', '8', '2021-01-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (216, '1648881416792702977', '多吉坝址1:1000地形图测绘', '1:1000', 'km²', '3.5', '2021-01-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (217, '1648881416792702977', '日衣变形体1:1000地形图测绘', '1:1000', 'km²', '1.0', '2021-01-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (218, '1648881416792702977', '料场1:1000地形图测绘', '1:1000', 'km²', '1.0', '2021-01-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (219, '1648881416759148545', '四等GNSS测量', '四等', '点', '7', '2021-02-10', '龚嘴水电站');
INSERT INTO `cmc_contract_work` VALUES (220, '1648881416759148545', '五等导线测量（代替四等三角高程）', '五等/四等', 'km', '6', '2021-02-10', '龚嘴水电站');
INSERT INTO `cmc_contract_work` VALUES (221, '1648881416759148545', '1:1000地形图测绘（岸上）', '1:1000', 'km²', '0.6', '2021-02-10', '龚嘴水电站');
INSERT INTO `cmc_contract_work` VALUES (222, '1648881416759148545', '1:1000地形图测绘（水下）', '1:1000', 'km²', '0.3', '2021-02-10', '龚嘴水电站');
INSERT INTO `cmc_contract_work` VALUES (223, '1648881416759148545', '1:200地形图测绘', '1:200', 'km²', '0.05', '2021-02-10', '龚嘴水电站');
INSERT INTO `cmc_contract_work` VALUES (224, '1648881416759148545', '右岸武警营地原排污管线测量', NULL, '点', '10', '2021-02-10', '龚嘴水电站');
INSERT INTO `cmc_contract_work` VALUES (225, '1648881416759148545', '右岸食堂原排污管线测量', NULL, '点', '16', '2021-02-10', '龚嘴水电站');
INSERT INTO `cmc_contract_work` VALUES (226, '1648881416759148545', '右岸宿舍原排污管线测量', NULL, '点', '6', '2021-02-10', '龚嘴水电站');
INSERT INTO `cmc_contract_work` VALUES (227, '1648881416759148545', '右岸办公楼原排污管线测量', NULL, '点', '4', '2021-02-10', '龚嘴水电站');
INSERT INTO `cmc_contract_work` VALUES (228, '1648881416759148545', '污水井井盖测量', NULL, '点', '21', '2021-02-10', '龚嘴水电站');
INSERT INTO `cmc_contract_work` VALUES (229, '1648881416759148545', '五等控制点', NULL, '点', '4', '2021-02-10', '龚嘴水电站');
INSERT INTO `cmc_contract_work` VALUES (230, '1648881416759148545', '四等GNSS测量', '四等', '点', '7', '2021-02-10', '铜街子水电站');
INSERT INTO `cmc_contract_work` VALUES (231, '1648881416759148545', '五等导线测量（代替四等三角高程）', '五等/四等', 'km', '6', '2021-02-10', '铜街子水电站');
INSERT INTO `cmc_contract_work` VALUES (232, '1648881416759148545', '1:1000地形图测绘（岸上）', '1:1000', 'km²', '0.4', '2021-02-10', '铜街子水电站');
INSERT INTO `cmc_contract_work` VALUES (233, '1648881416759148545', '1:1000地形图测绘（水下）', '1:1000', 'km²', '0.4', '2021-02-10', '铜街子水电站');
INSERT INTO `cmc_contract_work` VALUES (234, '1648881416721399809', '汉源县城主次干路1:200地形图测绘（带状）', '1:200', 'km²', '0.695', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (235, '1648881416721399809', '裸露边坡1:500地形图测绘', '1:500', 'km²', '0.719 ', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (236, '1648881416721399809', '移民增收项目1:200地形图测绘（试点）（房屋各拐点高程）', '1:200', '点', '1200 ', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (237, '1648881416721399809', '平面转换模型', NULL, '点', '21', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (238, '1648881416721399809', '高程转换模型', NULL, '点', '21', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (239, '1648881416721399809', '万里工业园区范家沟道路1:500地形图测绘（带状）', '1:500', 'km²', '0.425', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (240, '1648881416721399809', '汉源县青富段防洪工程1:1000地形地类图测绘', '1:1000', 'km²', '0.3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (241, '1648881416721399809', '桥址1:500地形地类图测绘', '1:500', 'km²', '0.1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (242, '1648881416721399809', '桥址1:200大断面测量', '1:200', 'km', '0.1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (243, '1648881416721399809', '断面基点测量', NULL, '点', '2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (244, '1648881416721399809', '四等GNSS测量', '四等', '点', '2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (245, '1648881416721399809', '五等导线（代替四等三角高程）测量', '四等', 'km', '3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (246, '1648881416721399809', '海子河坝园区1:500地形图测绘', '1:500', 'km²', '0.4', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (247, '1648881416721399809', '建坪园区1:500地形图测绘', '1:500', 'km²', '1.04', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (248, '1648881416721399809', '洪福园区1:500地形图测绘', '1:500', 'km²', '0.38', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (249, '1648881416721399809', '1:500公路地形图测绘', '1:500', 'km²', '1.04', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (250, '1648881416721399809', '建坪园区1:2000地形图测绘', '1:2000', 'km²', '1.47', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (251, '1648881416721399809', '1:200断面测量', '1:200', 'km', '3.2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (252, '1648881416721399809', '五等GNSS测量', '五等', '点', '10', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (253, '1648881416721399809', '硝厂沟1:500地形图测绘', '1:500', 'km²', '0.2', NULL, '由于OA系统只能录入20条任务详情，其他合同计划工作量内容详见合同第一条“项目概况表”。');
INSERT INTO `cmc_contract_work` VALUES (254, '1648881416721399809', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (255, '1648881416620736513', '根据省市文件要求以及《四川省河湖管理范围划定操作指南》《四川省河湖管理范围划定数字线划专用图生产指南》规定完成我区辖区内50km2以上七条河流管理范围划界工作。', NULL, NULL, NULL, '2020-11-30', '乙方在接到甲方通知后5日内进场开始工作，2020年10月底提交初步报告，2020年11月30日前完成工作。');
INSERT INTO `cmc_contract_work` VALUES (256, '1648881416620736513', '严格执行《四川省河湖管理范围划定操作指南》《四川省河湖管理范围划定数字线划专用图生产指南》《四川省河道管理范围划定基础测绘与洪水分析计算技术要求》及省、市其它相关规定的技术要求和标准，完成我区辖区内50 km2以上七条河流管理范围划界相关工作。', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (257, '1648881416603959298', '1:200地形图测绘（溢洪坝）', NULL, 'km²', '0.07', NULL, '合同签订后21日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (258, '1648881416603959298', '拉萨河达孜河段1:1000地形图测绘（岸上）', NULL, 'km²', '4.55', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (259, '1648881416603959298', '拉萨河达孜河段1:1000地形图测绘（水下）', NULL, 'km²', '3.14', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (260, '1648881416603959298', '1:200断面测量', NULL, 'km', '0.72', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (261, '1648881416603959298', '水工建筑物特征点坐标高程测量', NULL, '点', '574', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (262, '1648881416603959298', '五等GNSS测量', NULL, '点', '9', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (263, '1648881416603959298', '四等三角高程测量', NULL, 'km', '18.11', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (264, '1648881416578793474', '二滩大坝外部变形观测网测量、金龙山及霸王山谷坡稳定性监测、季报和年报编制、测量仪器鉴定等。', NULL, '项', '1', '2021-12-31', '2021年1月1日至2021年12月31日。');
INSERT INTO `cmc_contract_work` VALUES (265, '1648881416536850434', '热水河隧道（K0+034~K1+434）进出口区域1:500地形测量', '1:500', 'km²', '0.101', NULL, '30个日历天，且须满足项目业主工期要求。');
INSERT INTO `cmc_contract_work` VALUES (266, '1648881416536850434', '下寨沿江隧道（AK4+995~AK6+040）进出口区域1:500地形测量', '1:500', 'km²', '0.244', NULL, '30个日历天，且须满足项目业主工期要求。');
INSERT INTO `cmc_contract_work` VALUES (267, '1648881416536850434', '岩头隧道（K46+536~K47+139.8）全段区域内溜砂坡1:500地形测量', '1:500', 'km²', '0.236', NULL, '30个日历天，且须满足项目业主工期要求。');
INSERT INTO `cmc_contract_work` VALUES (268, '1648881416536850434', 'K99+451.500处春江桥（1×13 钢筋砼板桥）附近区域1:500地形测量', '1:500', 'km²', '0.068', NULL, '30个日历天，且须满足项目业主工期要求。');
INSERT INTO `cmc_contract_work` VALUES (269, '1648881416536850434', '雷波县库区范围规划的长约2km岩湾隧道进出口区域1:500地形测量', '1:500', 'km²', '0.37', NULL, '30个日历天，且须满足项目业主工期要求。');
INSERT INTO `cmc_contract_work` VALUES (270, '1648881416520073217', '湾东水电站和河口水电站复核测量', NULL, '项', '1', NULL, '湾东水电站和河口水电站复核测量的开工时间以甲方通知为准，乙方接到开工通知后应在15日内向甲方提交相关测绘成果资料');
INSERT INTO `cmc_contract_work` VALUES (271, '1648881416444575746', '三等GNSS测量', '三等', '点', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (272, '1648881416444575746', '五等导线（代替四等三角高程）', '五等', 'km', '15', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (273, '1648881416444575746', '1:2000 DLG生产', '1:2000', 'km²', '9', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (274, '1648881416444575746', '1:2000现场地形地类修测和补测', '1:2000', 'km²', '1.5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (275, '1648881416444575746', '1:2000地类测绘', '1:2000', 'km²', '9', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (276, '1648881416444575746', '1:2000地形地类缩放图测量', '1:2000', 'km²', '4.5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (277, '1648881416444575746', '1:2000地形地类缩放图外业复核', '1:2000', 'km²', '4.5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (278, '1648881416427798530', '三等GNSS测量', '三等', '点', '14', '2021-09-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (279, '1648881416427798530', '四等三角高程测量', '四等', 'km', '23', '2021-09-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (280, '1648881416427798530', '水库区1:10000地形图测绘', '1:10000', 'km²', '99.7', '2021-09-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (281, '1648881416427798530', '坝址区1:2000地形图测绘', '1:2000', 'km²', '14.2', '2021-09-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (282, '1648881416427798530', '坝址区1:5000地形图测绘', '1:5000', 'km²', '14.8', '2021-09-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (283, '1648881416427798530', '中坝址1:2000水下地形图测量', '1:2000', 'km²', '0.1', '2021-09-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (284, '1648881416427798530', '下坝址1:2000水下地形图测量', '1:2000', 'km²', '0.32', '2021-09-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (285, '1648881416427798530', '1:2000横断面测量', '1:2000', 'km', '29', '2021-09-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (286, '1648881416427798530', '1:5000横断面测量', '1:5000', 'km', '3.5', '2021-09-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (287, '1648881416427798530', '断面基点', NULL, '点', '70', '2021-09-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (288, '1648881416427798530', '1:2000同时水边线测量', NULL, 'km', '38.8', '2021-09-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (289, '1648881416427798530', '上、中、下坝址区1:2000三维地形面制作', '1:2000', 'km²', '17.5', '2021-09-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (290, '1648881416411021314', '三等GNSS测量', '三等', '点', '4', NULL, '阿尼桥水电站');
INSERT INTO `cmc_contract_work` VALUES (291, '1648881416411021314', '五等导线（代替四等三角高程）', '四等', 'km', '10', NULL, '阿尼桥水电站');
INSERT INTO `cmc_contract_work` VALUES (292, '1648881416411021314', '1:2000DLG生产', '1:2000', 'km²', '7.4', NULL, '阿尼桥水电站');
INSERT INTO `cmc_contract_work` VALUES (293, '1648881416411021314', '1:2000现场地形地类图实测', '1:2000', 'km²', '2', NULL, '阿尼桥水电站');
INSERT INTO `cmc_contract_work` VALUES (294, '1648881416411021314', '1:2000地类测绘', '1:2000', 'km²', '7.4', NULL, '阿尼桥水电站');
INSERT INTO `cmc_contract_work` VALUES (295, '1648881416411021314', '1:2000地形地类缩放图测量', '1:2000', 'km²', '10.6', NULL, '阿尼桥水电站');
INSERT INTO `cmc_contract_work` VALUES (296, '1648881416411021314', '1:2000地形地类缩放图复核', '1:2000', 'km²', '10.6', NULL, '阿尼桥水电站');
INSERT INTO `cmc_contract_work` VALUES (297, '1648881416411021314', '三等GNSS测量', '三等', '点', '4', NULL, '阿尼桥水电站');
INSERT INTO `cmc_contract_work` VALUES (298, '1648881416411021314', '五等导线（代替四等三角高程）', '四等', 'km', '15', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (299, '1648881416411021314', '1:2000DLG生产', '1:2000', 'km²', '15.6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (300, '1648881416411021314', '1:2000现场地形地类图实测', '1:2000', 'km²', '3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (301, '1648881416411021314', '1:2000地类测绘', '1:2000', 'km²', '15.6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (302, '1648881416411021314', '1:2000地形地类缩放图测量', '1:2000', 'km²', '11.4', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (303, '1648881416411021314', '1:2000地形地类缩放图复核', '1:2000', 'km²', '11.4', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (304, '1648881416377466882', 'GPS点（C级）', 'C级', '点', '38', NULL, '本项目界桩测设的范围为波罗水电站建设征地处理范围，包括水库淹没影响区、枢纽工程建设区范围。不含集镇新址占地、居民点占地、等级公路占地范围界桩测设工作。本工程的工期：自合同签订之日起3个月，合同完工前完成合同工作并通过发包人的验收提交最终成果。');
INSERT INTO `cmc_contract_work` VALUES (305, '1648881416377466882', '五等导线测量', '五等', 'km', '86', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (306, '1648881416377466882', '三等水准测量', '三等', 'km', '86', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (307, '1648881416377466882', '界桩放样与测量', NULL, '件', '1000', NULL, '4个为1件');
INSERT INTO `cmc_contract_work` VALUES (308, '1648881416377466882', '实物指标配合测量', NULL, '人.天', '300', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (309, '1648881416360689665', '武警营房扩建等区域的1:500地形图测绘', '1:500', 'km²', '0.4', '2021-03-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (310, '1648881416343912449', '鱼类采卵场1:1000水下地形图测绘', '1:1000', 'km²', '0.35 ', '2021-07-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (311, '1648881416343912449', '生态红线避让范围坐标转换（转成CGC2000）', NULL, '点', '36', '2021-07-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (312, '1648881416343912449', '生态红线避让范围shp文件制作', NULL, '点', '36', '2021-07-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (313, '1648881416343912449', '土地勘界范围坐标转换（转成CGC2000）', NULL, '点', '180', '2021-07-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (314, '1648881416343912449', '土地勘界范围shp文件制作', NULL, '点', '180', '2021-07-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (315, '1648881416327135233', '公路配合测量', NULL, '人.天', '26', NULL, '26个日历天，且须满足项目业主工期要求。');
INSERT INTO `cmc_contract_work` VALUES (316, '1648881416293580802', '扯索坝外部供水工程取水口及跨沟段1:500地形图测绘', '1:500', 'km²', '0.04', NULL, '合同签订后10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (317, '1648881416293580802', '扯索坝外部供水工程垮塌段1:500地形图测绘', '1:500', 'km²', '0.01', NULL, '合同签订后10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (318, '1648881416293580802', '扯索坝外部供水工程净水厂及高位水池1:500地形图测绘', '1:500', 'km²', '0.06', NULL, '合同签订后10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (319, '1648881416293580802', '二里坝外部供水工程取水枢纽1:500地形图测绘', '1:500', 'km²', '0.09', NULL, '合同签订后10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (320, '1648881416293580802', '二里坝外部供水工程净水厂1:500地形图测绘', '1:500', 'km²', '0.02', NULL, '合同签订后10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (321, '1648881416293580802', '冷碛塌岸防护工程1:500地形图测绘', '1:500', 'km²', '0.32', NULL, '合同签订后10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (322, '1648881416293580802', '泸定二中塌岸防护工程1:500地形图测绘', '1:500', 'km²', '0.15', NULL, '合同签订后10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (323, '1648881416260026369', '康定市升航村大坡地安置点1:1000地形图测绘', '1:1000', 'km²', '0.23', NULL, '合同签订后15日内向甲方提交CZTL康定段拆迁安置三道桥、水桥、升航安置点地形图测绘成果。');
INSERT INTO `cmc_contract_work` VALUES (324, '1648881416260026369', '康定市三道桥村1:1000地形图测绘', '1:1000', 'km²', '2.07', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (325, '1648881416260026369', '康定市三道桥村后坡1:2000地形图测绘', '1:2000', 'km²', '0.64 ', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (326, '1648881416260026369', '康定市水桥村引水线路1:1000地形图测绘', '1:1000', 'km²', '0.80', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (327, '1648881416260026369', '五等控制点测量', '五等', '点', '15', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (328, '1648881416260026369', '配合地勘测量', NULL, '人.天', '10', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (329, '1648881416243249154', '控制测量（GPS）E级网', 'E级', '点', '5', NULL, '要求在签订合同之后10个工作日内完成。');
INSERT INTO `cmc_contract_work` VALUES (330, '1648881416243249154', '1:2000地形测量', '1:2000', 'km²', '2.3', NULL, '要求在签订合同之后10个工作日内完成。');
INSERT INTO `cmc_contract_work` VALUES (331, '1648881416243249154', '工程点及矿权拐点测量', NULL, '点', '40', NULL, '要求在签订合同之后10个工作日内完成。');
INSERT INTO `cmc_contract_work` VALUES (332, '1648881416243249154', '勘探基线测量', NULL, 'km', '7', NULL, '要求在签订合同之后10个工作日内完成。');
INSERT INTO `cmc_contract_work` VALUES (333, '1648881416226471938', '菩提河坝1:500地形图测绘', '1:500', 'km²', '0.4', NULL, '合同签订后20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (334, '1648881416226471938', '菩提河坝复垦区1:1000地形图测绘', '1:1000', 'km²', '0.15', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (335, '1648881416226471938', '岩角坝土料场1:500地形图测绘', '1:500', 'km²', '0.5', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (336, '1648881416226471938', '岩角坝土料场五等GNSS控制点测量', '五等', '点', '3', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (337, '1648881416226471938', '猴子岩角坝钻孔配合测量', NULL, '点', '15', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (338, '1648881416226471938', '泥洛河坝1:500地形图测绘', '1:500', 'km²', '0.72', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (339, '1648881416226471938', '泥洛河坝引水线路1:2000地形图测绘', '1:2000', 'km²', '0.16', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (340, '1648881416226471938', '泥洛河坝五等导线测量', '五等', NULL, '6', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (341, '1648881416226471938', '格宗乡江口沟1:1000地形图测绘', '1:1000', 'km²', '1.9', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (342, '1648881416226471938', '崩角地1：1000地形地类图测绘', '1:1000', 'km²', '0.5', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (343, '1648881416226471938', '索龙沟1:500地形图测绘', '1:500', 'km²', '0.1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (344, '1648881416213889025', '拉林铁路影响评价区1:500地形图测绘', '1:500', 'km²', '6.24', '2022-06-15', '地形图测量');
INSERT INTO `cmc_contract_work` VALUES (345, '1648881416213889025', '坝址区1:1000地形图测绘', '1:1000', 'km²', '42.50', '2022-06-15', '地形图测量');
INSERT INTO `cmc_contract_work` VALUES (346, '1648881416213889025', '1:2000地形图测绘', '1:2000', 'km²', '253.36', '2022-06-15', '地形图测量');
INSERT INTO `cmc_contract_work` VALUES (347, '1648881416213889025', '土料运输线路1：2000地形图测绘', '1:2000', 'km²', '25.7', '2022-06-15', '地形图测量');
INSERT INTO `cmc_contract_work` VALUES (348, '1648881416213889025', '北沟正常蓄水位以上1：2000地形图测绘', '1:2000', 'km²', '1.93', '2022-06-15', '地形图测量');
INSERT INTO `cmc_contract_work` VALUES (349, '1648881416213889025', '胶带机线路1:2000地形图测绘', '1:2000', 'km²', '2.74', '2022-06-15', '地形图测量');
INSERT INTO `cmc_contract_work` VALUES (350, '1648881416213889025', '居民点1:1000地形地类图测绘', '1:1000', 'km²', '2.50', '2022-06-15', '地形地类图测量');
INSERT INTO `cmc_contract_work` VALUES (351, '1648881416213889025', '库区1:2000地形地类图测绘', '1:2000', 'km²', '238.75', '2022-06-15', '地形地类图测量');
INSERT INTO `cmc_contract_work` VALUES (352, '1648881416213889025', '枢纽区1:2000地类图补测', '1:2000', 'km²', '198.50', '2022-06-15', '地形地类图测量');
INSERT INTO `cmc_contract_work` VALUES (353, '1648881416213889025', '1:2000地形地类图测绘', '1:2000', 'km²', '3.84', '2022-06-15', '地形地类图测量');
INSERT INTO `cmc_contract_work` VALUES (354, '1648881416213889025', '三等GNSS联测', '三等', '点', '14', '2022-06-15', '施工测量控制网');
INSERT INTO `cmc_contract_work` VALUES (355, '1648881416213889025', '三等GNSS测量', '三等', '点', '18', '2022-06-15', '施工测量控制网');
INSERT INTO `cmc_contract_work` VALUES (356, '1648881416213889025', '四等GNSS测量', '四等', '点', '3', '2022-06-15', '施工测量控制网');
INSERT INTO `cmc_contract_work` VALUES (357, '1648881416213889025', '四等GNSS测量', '四等', '点', '10', '2022-06-15', '施工测量控制网');
INSERT INTO `cmc_contract_work` VALUES (358, '1648881416213889025', '三等水准测量（2条公路）', '三等', 'km', '64.0 ', '2022-06-15', '施工测量控制网');
INSERT INTO `cmc_contract_work` VALUES (359, '1648881416213889025', '三等三角高程测量', '三等', 'km', '33.0 ', '2022-06-15', '施工测量控制网');
INSERT INTO `cmc_contract_work` VALUES (360, '1648881416213889025', '四等水准测量', '四等', 'km', '34.0 ', '2022-06-15', '施工测量控制网');
INSERT INTO `cmc_contract_work` VALUES (361, '1648881416213889025', '三等水准引测', '三等', 'km', '25.0', '2022-06-15', '施工测量控制网');
INSERT INTO `cmc_contract_work` VALUES (362, '1648881416213889025', '库区实景三维建模航测影像获取', NULL, 'km²', '238.8', '2022-06-15', '其它测量');
INSERT INTO `cmc_contract_work` VALUES (363, '1648881416213889025', '坝址区河段1:2000三维地形面制作', '1:2000', 'km²', '248.91', '2022-06-15', '其它测量');
INSERT INTO `cmc_contract_work` VALUES (364, '1648881416213889025', '特征点测量', NULL, '点', '784', '2022-06-15', '其它测量');
INSERT INTO `cmc_contract_work` VALUES (365, '1648881416213889025', '坐标转换', NULL, '点', '2590.0', '2022-06-15', '其它测量');
INSERT INTO `cmc_contract_work` VALUES (366, '1648881416213889025', '公路测量', NULL, 'km', '13.67', '2022-06-15', '其它测量');
INSERT INTO `cmc_contract_work` VALUES (367, '1648881416163557378', '八窝龙施工场地中业主临时营地、表土堆放场1:500地形图测绘', '1:500', 'km²', '0.26', '2022-06-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (368, '1648881416163557378', '五等GNSS测量', '五等', '点', '4.00', '2022-06-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (369, '1648881416163557378', '库区2254m高程线提取坐标转换', NULL, '点', '416.00', '2022-06-14', '含力丘河汇口；木灰沟口至楞古上坝址河段；宋玉沟汇口以上；马蹄村至马蹄村以下4km；减水河段有跌水河段。');
INSERT INTO `cmc_contract_work` VALUES (370, '1648881416163557378', '辅助路1:2000地形图坐标转换', NULL, '点', '80.00', '2022-06-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (371, '1648881416163557378', '辅助路九龙1:2000地形图坐标转换', NULL, '点', '144.00', '2022-06-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (372, '1648881416163557378', '辅助路1:2000占地范围线SHP文件制作', NULL, '点', '224.00', '2022-06-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (373, '1648881416163557378', '辅助路1:5000地形图坐标转换', NULL, '点', '44.00', '2022-06-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (374, '1648881416163557378', '辅助路1:5000占地范围线SHP文件制作', NULL, '点', '44.00', '2022-06-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (375, '1648881416163557378', '生态红线图含库区、施工区、辅助路、对外专用路坐标转换', NULL, '点', '100.00', '2022-06-14', NULL);
INSERT INTO `cmc_contract_work` VALUES (376, '1648881416029339649', '1:1000横断面测量', '1:1000', 'km', '23.2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (377, '1648881416029339649', '1:1000水边线测量', '1:1000', 'km', '15', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (378, '1648881416029339649', '断面基点测量', NULL, '点', '232', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (379, '1648881416029339649', '1:1000地形图测绘', '1:1000', 'km²', '3.5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (380, '1648881416029339649', '1:1000水下地形图测绘', '1:1000', 'km²', '0.8', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (381, '1648881416029339649', '依生沟1:1000地形图测绘', '1:1000', 'km²', '1.5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (382, '1648881416029339649', '浦西乡上游场地1:500地形图测绘', '1:500', 'km²', '0.2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (383, '1648881416029339649', '原有地形图转换成2000国家大地坐标，高程转成85国家基准', NULL, '点', '1600', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (384, '1648881416029339649', '绰斯甲干流及支沟沿河视频航摄', NULL, 'km', '40', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (385, '1648881415962230785', '1:500地形图补测', '1:500', 'km²', '0.2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (386, '1648881415962230785', '中桩放线', NULL, 'km', '6.54', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (387, '1648881415932870657', '孙家沟实物指标配合测量（第一次）', NULL, '人.天', '16', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (388, '1648881415932870657', '孙家沟实物指标配合测量（第二次）', NULL, '人.天', '18', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (389, '1648881415911899138', '永久界桩搬运、开挖、安装、埋设', NULL, '根', '242', '2021-08-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (390, '1648881415911899138', '加密界桩搬运、开挖、安装、埋设', NULL, '根', '243', '2021-08-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (391, '1648881415911899138', '临时界桩搬运、开挖、安装、埋设', NULL, '根', '83', '2021-08-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (392, '1648881415911899138', '墙式水位标志牌制作、搬运、开挖、安装、埋设', NULL, '个', '2', '2021-08-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (393, '1648881415911899138', '永久界桩、加密界桩、临时界桩及墙式水位标志牌放线与测量', NULL, '个', '566', '2021-08-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (394, '1648881415911899138', '界桩点展绘、绘制红线图', NULL, '幅', '16', '2021-08-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (395, '1648881415911899138', '绘制界桩测设图', NULL, '人.天', '14', '2021-08-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (396, '1648881415895121921', '永久界桩搬运、开挖、安装、埋设', NULL, '根', '146 ', '2021-08-06', '含起算点2点');
INSERT INTO `cmc_contract_work` VALUES (397, '1648881415895121921', '加密界桩搬运、开挖、安装、埋设', NULL, '根', '188', '2021-08-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (398, '1648881415895121921', '临时界桩搬运、开挖、安装、埋设', NULL, '根', '77', '2021-08-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (399, '1648881415895121921', '墙式水位标志牌制作、搬运、开挖、安装、埋设', NULL, '个', '2', '2021-08-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (400, '1648881415895121921', '永久界桩、加密界桩、临时界桩及墙式水位标志牌放线与测量', NULL, '个', '409', '2021-08-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (401, '1648881415895121921', '界桩点展绘、绘制红线图', NULL, '幅', '14', '2021-08-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (402, '1648881415895121921', '绘制界桩测设图', NULL, '人.天', '14', '2021-08-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (403, '1648881415861567490', '五等CNSS测量', '五等', '点', NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (404, '1648881415861567490', '集中安置点、寺院等1:1000地形图测绘', '1:1000', 'km²', NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (405, '1648881415861567490', '供水工程1:2000地形图测绘（带状）', '1:2000', 'km²', NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (406, '1648881415861567490', '取水口1:500地形图测绘', '1:500', 'km²', NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (407, '1648881415861567490', '安置点、寺院等1:500横断面测量', '1:500', 'km', NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (408, '1648881415861567490', '水边线1:1000水边线测量', '1:1000', 'km', NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (409, '1648881415861567490', '涉河建筑、松岗大桥现状、洪调点测量及坐标转换', NULL, '项', NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (410, '1648881415815430146', '重庆轨道交通4号线西延伸段工程施工监测及控制测量工作。', NULL, '项', '1', NULL, '详细工作内容见合同第一条“项目概况及合同工作内容”中第1.2款的表格。自本合同签订之日起至2024年12月底配合全线完成土建施工、铺轨工程等总包项目范围内工作。本工程延期后此合同工期顺延，不做费用调整。合同完工前完成合同工作并通过甲方的验收提交最终成果。');
INSERT INTO `cmc_contract_work` VALUES (411, '1648881415798652929', '淹没区（下游至立丘河下游吊桥）1:5000地形地类图测绘', '1:500', 'km²', '20.55', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (412, '1648881415798652929', '库区范围线提取', NULL, '点', '200', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (413, '1648881415781875714', '四等GNSS测量', '四等', '点', '8', NULL, '要求在签订合同之后7日内内完成。');
INSERT INTO `cmc_contract_work` VALUES (414, '1648881415781875714', '五等导线测量（代替四等三角高程）', '四等', 'km', '5', NULL, '要求在签订合同之后7日内内完成。');
INSERT INTO `cmc_contract_work` VALUES (415, '1648881415781875714', '升压站1:500地形图测绘', '1:500', '项', '1', NULL, '要求在签订合同之后7日内内完成。');
INSERT INTO `cmc_contract_work` VALUES (416, '1648881415727349761', '龚嘴电站1:1000地形图补测', '1:1000', 'km²', '0.2', '2021-06-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (417, '1648881415727349761', '龚嘴电站坝轴线上游1000m库区河道1:1000水下地形图测绘', '1:1000', 'km²', '0.3', '2021-06-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (418, '1648881415727349761', '龚嘴电站坝下河段1:500水边线测量', '1:500', 'km', '2', '2021-06-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (419, '1648881415727349761', '铜街子电站1:1000地形图补测', '1:1000', 'km²', '0.6', '2021-06-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (420, '1648881415727349761', '铜街子电站坝轴线上游1000m库区河道1:1000水下地形图测绘', '1:1000', 'km²', '0.3', '2021-06-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (421, '1648881415727349761', '铜街子电站坝下河段1:500水边线测量', '1:500', 'km', '1.8', '2021-06-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (422, '1648881415727349761', '铜街子新建消防站1:500地形图测绘', '1:500', 'km²', '0.1', '2021-06-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (423, '1648881415727349761', '铜街子新建消防站五等GNSS测量', '五等', '点', '4', '2021-06-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (424, '1648881415685406721', '枢纽区1:500三维地形面制作', '1:500', 'km²', '4.8', '2021-06-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (425, '1648881415668629506', '四等GNSS测量', '四等', '点', '6', '2022-01-17', NULL);
INSERT INTO `cmc_contract_work` VALUES (426, '1648881415668629506', '四等三角高程', '四等', 'km', '11.8', '2022-01-17', NULL);
INSERT INTO `cmc_contract_work` VALUES (427, '1648881415668629506', '1:2000地形图测绘', '1:2000', 'km²', '5.10', '2022-01-17', '不予计费');
INSERT INTO `cmc_contract_work` VALUES (428, '1648881415668629506', '1:2000地形图测绘', '1:2000', 'km²', '6.10', '2022-01-17', NULL);
INSERT INTO `cmc_contract_work` VALUES (429, '1648881415630880769', '垫高防护区1:1000地形图测绘', '1:1000', '点', '1.5', NULL, '本合同服务期限自本合同签订之日起，至老鹰岩二级水电站垫高防护区地形图测绘及老鹰岩至龙头石沿河道航拍视频拍摄通过甲方评审。');
INSERT INTO `cmc_contract_work` VALUES (430, '1648881415630880769', '垫高防护区1:500地形图测绘', '1:500', 'km²', '0.35', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (431, '1648881415630880769', '老鹰岩至龙头石沿河道航拍视频拍摄', NULL, 'km²', '20', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (432, '1648881415630880769', '正射影像作图（1:2000 DOM）制作', '1:2000', 'km²', '22.9', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (433, '1648881415567966210', '降曲河1:1000地形测量', '1:1000', 'km²', '4.3', '2021-08-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (434, '1648881415567966210', '降曲河无人机航拍实景三维模型', '1:1000', 'km²', '4.3', '2021-08-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (435, '1648881415567966210', '降曲河、坝址枢纽区、引尾水线路区、俄德西沟料场区地形图坐标系转换', NULL, 'km²', '15.7', '2021-08-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (436, '1648881415492468738', '二等平面观测墩', '二等', '点', '3', '2021-08-30', '新增网点土建');
INSERT INTO `cmc_contract_work` VALUES (437, '1648881415492468738', '二等基本水准点', '二等', '点', '3', '2021-08-30', '新增网点土建');
INSERT INTO `cmc_contract_work` VALUES (438, '1648881415492468738', '二等普通水准点', '二等', '点', '4', '2021-08-30', '新增网点土建');
INSERT INTO `cmc_contract_work` VALUES (439, '1648881415492468738', '二等GNSS测量', '二等', '点', '6', '2021-08-30', '观测');
INSERT INTO `cmc_contract_work` VALUES (440, '1648881415492468738', '二等三角测量', '二等', '点', '26', '2021-08-30', '观测');
INSERT INTO `cmc_contract_work` VALUES (441, '1648881415492468738', '二等边长测量', '二等', '条', '38', '2021-08-30', '观测');
INSERT INTO `cmc_contract_work` VALUES (442, '1648881415492468738', '三等光电测距三角高程', '三等', 'km', '13', '2021-08-30', '观测');
INSERT INTO `cmc_contract_work` VALUES (443, '1648881415492468738', '二等水准测量', '二等', 'km', '9.7', '2021-08-30', '观测');
INSERT INTO `cmc_contract_work` VALUES (444, '1648881415492468738', '资料整编及出版', NULL, '项', '1', '2021-08-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (445, '1648881415475691522', '成彭路彭州市与新都区交界附近航测（航测面积约为1.48km2），包括外业无人机航飞工作，内业整理提供该段正射影像图', NULL, 'km²', '1.48', NULL, '合同签订之后14日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (446, '1648881415475691522', '成彭路彭青淮互通立交以北至三绕段航测（航测面积约7.4km2），包括开展外业无人机航飞及地物地貌调绘工作，内业整理提供该段地形图、正射影像图及三维实景模型。', NULL, 'km²', '7.4', NULL, '合同签订之后14日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (447, '1648881415446331394', '四等GNSS测量', '四等', '点', '4', '2021-07-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (448, '1648881415446331394', '1:2000地形图测量', '1:2000', 'km²', '3', '2021-07-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (449, '1648881415446331394', '打罗桥以下-雅砻江1:500地形图测绘', '1:500', 'km²', '0.04', '2021-07-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (450, '1648881415446331394', '金打公路k6+750泥石流1:500地形测绘', '1:500', 'km²', '0.02', '2021-07-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (451, '1648881415446331394', '竹子坝西侧沟取水口1:500地形测绘', '1:500', 'km²', '0.03', '2021-07-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (452, '1648881415446331394', '1：2000正射影像图制作', '1:2000', 'km²', '3', '2021-07-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (453, '1648881415429554178', '1:1000地形图测绘（码头1）', '1:1000', 'km²', '1.20 ', NULL, '合同签订并生效后30天内完成。');
INSERT INTO `cmc_contract_work` VALUES (454, '1648881415429554178', '1:1000地形图测绘（码头2）', '1:1000', 'km²', '1.25', NULL, '合同签订并生效后30天内完成。');
INSERT INTO `cmc_contract_work` VALUES (455, '1648881415429554178', '1:1000地形图测绘（码头3）', '1:1000', 'km²', '0.80', NULL, '合同签订并生效后30天内完成。');
INSERT INTO `cmc_contract_work` VALUES (456, '1648881415429554178', '1:1000地形图测绘（码头补测）', '1:1000', 'km²', '0.40', NULL, '合同签订并生效后30天内完成。');
INSERT INTO `cmc_contract_work` VALUES (457, '1648881415429554178', '瓦孜组对外连接道路1:1000地形图测绘', '1:1000', 'km²', '2.00', NULL, '合同签订并生效后30天内完成。');
INSERT INTO `cmc_contract_work` VALUES (458, '1648881415429554178', '昆地1:500地形地类图测绘', '1:500', 'km²', '0.20', NULL, '合同签订并生效后30天内完成。');
INSERT INTO `cmc_contract_work` VALUES (459, '1648881415412776962', '枢纽区1:500地形图测绘', '1:500', 'km²', '10', '2021-09-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (460, '1648881415412776962', '库区防洪堤1:1000带状地形图测绘', '1:1000', 'km²', '3.8', '2021-09-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (461, '1648881415412776962', '防洪堤1:200横断面测量', '1:200', 'km²', '18.4', '2021-09-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (462, '1648881415412776962', '断面基点测量', NULL, '点', '184', '2021-09-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (463, '1648881415412776962', '现场联测吴淞高程点', NULL, '点', '2', '2021-09-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (464, '1648881415412776962', '老木孔1985国家高程基准联测点', NULL, '点', '2', '2021-09-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (465, '1648881415412776962', '乌尤寺水文站水文高程读数高程转换（由吴淞高程转成1985国家高程基准）', NULL, '人.天', '3', '2021-09-30', '6815点');
INSERT INTO `cmc_contract_work` VALUES (466, '1648881415375028225', '拟建场址地形图测绘', '1:2000', 'km²', '10', '2021-07-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (467, '1648881415362445314', '泸县2020年度国土变更调查', NULL, '项', '1', NULL, '2021年9月30日前，完成国土变更调查成果验收工作。');
INSERT INTO `cmc_contract_work` VALUES (468, '1648881415349862402', '泸县自然资源（九曲河）按相关要求划定登记单元范围并完成确权登记', NULL, '项', '1', '2020-12-31', '具体要求详见合同第三条“服务内容与服务标准“');
INSERT INTO `cmc_contract_work` VALUES (469, '1648881415286947841', '淹没区1:5000地类地形图测绘', '1:5000', 'km²', '27.25', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (470, '1648881415286947841', '集镇新址1:2000地类地形图测绘', '1:2000', 'km²', '0.20', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (471, '1648881415265976322', '五等控制点', '五等', '点', '6', NULL, '合同签订之日起算，30日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (472, '1648881415265976322', '1：2000地形图测量', '1:2000', 'km²', '6.14', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (473, '1648881415265976322', '1：2000地形面制作', '1:2000', 'km²', '6.14', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (474, '1648881415265976322', '1：5000地形图测量', '1:5000', 'km²', '10.69', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (475, '1648881415265976322', '1：2000地形图缩编成1:5000地形图', '1:5000', 'km²', '6.14', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (476, '1648881415265976322', '1：5000地形面制作', '1:5000', 'km²', '16.83', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (477, '1648881415240810497', '1:500地形图补测', '1:500', 'km²', '1.55', NULL, '现场测绘50个日历天，在工程施工过程中派参与项目设计人员进驻现场工地解决相关技术问题。');
INSERT INTO `cmc_contract_work` VALUES (478, '1648881415240810497', '中桩放线', NULL, 'km', '3.2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (479, '1648881415240810497', '新增挡墙测量定位', NULL, '点', '80', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (480, '1648881415240810497', '破坏路面测量', NULL, '点', '140', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (481, '1648881415240810497', '已有控制点坐标转换', NULL, '点', '20', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (482, '1648881415240810497', '原有1:2000地形图坐标转换', NULL, '点', '140', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (483, '1648881415047872514', '五等控制点', '五等', '点', '6', NULL, '合同签订之日起算，30日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (484, '1648881415047872514', '1：5000地形图测量', '1:5000', 'km²', '44.24', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (485, '1648881415047872514', '1：2000地形图测量', '1:2000', 'km²', '18.30', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (486, '1648881415047872514', '1：2000地形图缩编成1:5000地形图', '1:5000', 'km²', '18.30', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (487, '1648881415047872514', '1：5000地形面制作', '1:5000', 'km²', '55.94', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (488, '1648881415047872514', '1：2000地形面制作', '1:2000', 'km²', '18.30', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (489, '1648881415026900993', '通过对沐川县原林权登记业务系统及登记资料的梳理，全面收集地籍管理、林权登记等图形数据及权属数据；', NULL, '项', '1', NULL, '2021年12月底前完成林权登记数据整合建库入库并汇交。若上级对完成时间另有新规定的，按新规定执行。项目地点：乐山市沐川县。');
INSERT INTO `cmc_contract_work` VALUES (490, '1648881415026900993', '按照国家相关标准规范，充分利用已有成果，保障原基础数据的完整、齐全，在不低于 1：10000 的遥感影像图上绘制边界，在不做大量外业工作量的情况下开展内业落图，完成约25.5 万宗、150万亩存量林权图斑调绘、底图制作、数据矢量化及整理录入转换及约110万页登记档案扫描、整理、挂接等工作，建立符合不动产登记信息数据库标准要求的不动产登记信息数据库并完成汇交任务；', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (491, '1648881415026900993', '按照部、省、市对林权数据整合项目要求需完成的其他工作。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (492, '1648881415001735169', '河口变形边坡1:2000地形图测绘', '1:2000', 'km²', '2.0 ', NULL, '合同签订后50日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (493, '1648881415001735169', '云南库区新增滑坡影响区实物指标调查配合测量（黄华、务基、大兴3个乡镇）', NULL, '人.天', '204', NULL, '合同签订后50日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (494, '1648881415001735169', '云南库区新增影响区实物指标调查（巧家）', NULL, '人.天', '24', NULL, '合同签订后50日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (495, '1648881415001735169', '云南库区新增影响区实物指标调查（昭阳区）', NULL, '人.天', '24', NULL, '合同签订后50日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (496, '1648881414905266178', '武警泸定中队1:2000地形图测绘', '1:2000', 'km²', '1.08', NULL, '合同签订后10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (497, '1648881414905266178', '武警泸定中队安置场地1:500地形图测绘', '1:500', 'km²', '0.1', NULL, '合同签订后10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (498, '1648881414905266178', '华电业主营地1:1000地形图测绘', '1:1000', 'km²', '0.7', NULL, '合同签订后10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (499, '1648881414905266178', '华电业主营地安置场地1:500地形图测绘', '1:500', 'km²', '0.1', NULL, '合同签订后10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (500, '1648881414880100353', '冕宁演练前现场查勘', NULL, '人.天', '4', '2021-12-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (501, '1648881414880100353', '1:500倾斜摄影', NULL, 'km²', '1.58', '2021-12-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (502, '1648881414880100353', '1:500数字高程模型（DEM）', NULL, 'km²', '1.58', '2021-12-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (503, '1648881414880100353', '1:500数字正射影像（DOM）', NULL, 'km²', '1.58', '2021-12-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (504, '1648881414880100353', '1:500实景三维模型制作', NULL, 'km²', '1.58', '2021-12-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (505, '1648881414880100353', '应急演练', NULL, '人.天', '45', '2021-12-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (506, '1648881414880100353', '租赁应急设备', NULL, '台套', '5', '2021-12-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (507, '1648881414859128834', '无人机航拍', NULL, 'km', '27.20', '2022-02-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (508, '1648881414859128834', '后期视频制作', NULL, '人.天', '10.00', '2022-02-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (509, '1648881414775242753', '光伏布置区域测绘1：500', '1:500', 'km²', '0.3', NULL, '合同签订并生效后30天内完成。');
INSERT INTO `cmc_contract_work` VALUES (510, '1648881414775242753', '示范区测图1:1000', '1:1000', 'km²', '2.46', NULL, '合同签订并生效后30天内完成。');
INSERT INTO `cmc_contract_work` VALUES (511, '1648881414775242753', '取水构筑物测绘1:500', '1:500', 'km²', '0.51', NULL, '合同签订并生效后30天内完成。');
INSERT INTO `cmc_contract_work` VALUES (512, '1648881414775242753', '示范区1:1000正射影像', '1:1000', 'km²', '2.46', NULL, '合同签订并生效后30天内完成。');
INSERT INTO `cmc_contract_work` VALUES (513, '1648881414750076930', '控制测量，包括选点、造埋、绘点之记、观测，平差计算，成果表编制；', NULL, '项', '1', NULL, '投标人应于甲方通知进场150天提交五等以上控制点成果表、四等以上控制点的计算资料、测量报告和检查验收报告、资料硬盘等；于甲方通知进场180天配合完成成果现场验收及移交。');
INSERT INTO `cmc_contract_work` VALUES (514, '1648881414750076930', '界桩测设，包括界桩制作、搬运、开挖、安装、埋设及放线与测量；', NULL, '项', '1', NULL, '投标人应于甲方通知进场150天提交五等以上控制点成果表、四等以上控制点的计算资料、测量报告和检查验收报告、资料硬盘等；于甲方通知进场180天配合完成成果现场验收及移交。');
INSERT INTO `cmc_contract_work` VALUES (515, '1648881414750076930', '墙式标志牌测设，包括墙式标志牌制作、搬运、开挖、安装、埋设及放线与测量；', NULL, '项', '1', NULL, '投标人应于甲方通知进场150天提交五等以上控制点成果表、四等以上控制点的计算资料、测量报告和检查验收报告、资料硬盘等；于甲方通知进场180天配合完成成果现场验收及移交。');
INSERT INTO `cmc_contract_work` VALUES (516, '1648881414750076930', '界桩点展绘、征地红线图绘制，包括界桩点展点与绘制、征地红线图绘制等；', NULL, '项', '1', NULL, '投标人应于甲方通知进场150天提交五等以上控制点成果表、四等以上控制点的计算资料、测量报告和检查验收报告、资料硬盘等；于甲方通知进场180天配合完成成果现场验收及移交。');
INSERT INTO `cmc_contract_work` VALUES (517, '1648881414750076930', '配合成果现场验收及移交。', NULL, '项', '1', NULL, '投标人应于甲方通知进场150天提交五等以上控制点成果表、四等以上控制点的计算资料、测量报告和检查验收报告、资料硬盘等；于甲方通知进场180天配合完成成果现场验收及移交。');
INSERT INTO `cmc_contract_work` VALUES (518, '1648881414695550978', '污水处理厂新址1：1000地形地类图测绘', '1:1000', 'km²', '0.20', NULL, '合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (519, '1648881414695550978', '县城上游八吉村2#安置点1：500地形地类图测绘', '1:500', 'km²', '0.30', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (520, '1648881414695550978', '县城上游八吉村2#取水1：1000地形地类图测绘', '1:1000', 'km²', '0.50', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (521, '1648881414695550978', '县城上游八吉村1#安置点1：500地形地类图测绘', '1:500', 'km²', '0.30', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (522, '1648881414695550978', '县城上游八吉村1#取水1：500地形地类图测绘', '1:500', 'km²', '0.30', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (523, '1648881414695550978', '金沙集镇垫高新址1：500地形地类图测绘', '1:500', 'km²', '1.70', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (524, '1648881414695550978', '东扎吊桥1：1000地形地类图测绘', '1:1000', 'km²', '0.10', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (525, '1648881414695550978', '岩比一号桥1：1000地形地类图测绘', '1:1000', 'km²', '0.10', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (526, '1648881414695550978', '库位防洪堤1：1000地形地类图测绘', '1:1000', 'km²', '0.50', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (527, '1648881414695550978', '岩比乡右岸公路1：1000地形地类图测绘', '1:1000', 'km²', '0.05', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (528, '1648881414695550978', '河坡镇格学村桥1：1000地形地类图测绘', '1:1000', 'km²', '0.10', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (529, '1648881414695550978', '河坡镇格学村1#安置点1：500地形地类图测绘', '1:500', 'km²', '0.60', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (530, '1648881414695550978', '河坡镇格学村1#取水1：1000地形地类图测绘', '1:1000', 'km²', '0.30', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (531, '1648881414695550978', '河坡镇格学村2#安置点1：500地形地类图测绘', '1:500', 'km²', '0.30', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (532, '1648881414695550978', '河坡镇格学村2#取水1：1000地形地类图测绘', '1:1000', 'km²', '0.30', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (533, '1648881414695550978', '河坡镇格学村3#安置点1：500地形地类图测绘', '1:500', 'km²', '0.30', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (534, '1648881414695550978', '河坡镇仁白村取水1：1000地形地类图测绘', '1:1000', 'km²', '0.80', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (535, '1648881414695550978', '业主营地1：1000地形地类图测绘', '1:1000', 'km²', '1.65', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (536, '1648881414695550978', '变电用地1：1000地形地类图测绘', '1:1000', 'km²', '0.55', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (537, '1648881414695550978', '金沙至吾倧通村公路 1：1000地形地类图测绘', '1:1000', 'km²', '3.95', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (538, '1648881414695550978', '金沙至吾倧通村公路 1：1000地形地类图测绘', '1:1000', 'km²', '0.40', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (539, '1648881414695550978', '扎拥大桥复建新址1：1000地形地类图测绘', '1:1000', 'km²', '0.35', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (540, '1648881414695550978', '扎拥公路1：1000地形地类图测绘', '1:1000', 'km²', '10.30', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (541, '1648881414695550978', '水文断面', NULL, 'km', '10.00', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (542, '1648881414695550978', '五等图根点', '五等', '点', '39', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (543, '1648881414674579458', '四等GNSS测量', '四等', '点', '9', NULL, '本合同服务期限自本合同签订之日起，至老鹰岩一级水电站迁建企业新址、什月河地形图测绘通过甲方评审。');
INSERT INTO `cmc_contract_work` VALUES (544, '1648881414674579458', '四等三角高程测量', '四等', 'km', '18', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (545, '1648881414674579458', '企事业单位迁建1:500地形图测绘', '1:500', 'km²', '0.8', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (546, '1648881414674579458', '对外连接道路1:2000地形图测绘（带状）', '1:2000', 'km²', '2.91', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (547, '1648881414674579458', '小水工业区外部供水1:1000地形图测绘', '1:1000', 'km²', '0.55', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (548, '1648881414674579458', '什月河1:500地形图测绘', '1:500', 'km²', '0.15', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (549, '1648881414674579458', '什月河1:500断面测量', '1:500', 'km', '0.1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (550, '1648881414674579458', '什月河断面基点', NULL, '点', '2', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (551, '1648881414641025025', 'JW梯级电站', NULL, NULL, NULL, '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (552, '1648881414641025025', '二等GNSS测量', '二等', '点', '8.00', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (553, '1648881414641025025', '三等GNSS测量', '三等', '点', '23.00', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (554, '1648881414641025025', '二等基本水准点选埋', '二等', '点', '9.00', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (555, '1648881414641025025', '二等普通水准点选埋', '二等', '点', '10.00', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (556, '1648881414641025025', '二等水准测量', '二等', 'km', '156.00', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (557, '1648881414641025025', '三等水准测量', '三等', 'km', '100.00', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (558, '1648881414641025025', '1:2000地形图测绘', '1:2000', 'km²', '287.73', '2022-10-31', '利用已有机载激光数据内业生成DLG，外业修测');
INSERT INTO `cmc_contract_work` VALUES (559, '1648881414641025025', '1:5000地形图新测', '1:5000', 'km²', '308.00', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (560, '1648881414641025025', '1:2000缩编为1:5000地形图', '1:5000', 'km²', '265.00', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (561, '1648881414641025025', '玉松中闸址~下闸址段1:1000水下地形测量', '1:1000', 'km²', '1.50', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (562, '1648881414641025025', '多雄河流域1:5000正射影像制作（叠加地形图）', '1:5000', '幅', '91.68', '2022-10-31', '1幅=6.25 km&sup2;,共573 km&sup2;');
INSERT INTO `cmc_contract_work` VALUES (563, '1648881414641025025', 'JW梯级引水线路区1:5000三维地形面', '1:5000', '幅', '59.42', '2022-10-31', '1幅=6.25 km&sup2;,共371.4 km&sup2;');
INSERT INTO `cmc_contract_work` VALUES (564, '1648881414641025025', 'JW梯级闸址、厂址等枢纽区1:2000三维地形面', '1:2000', '幅', '58.00', '2022-10-31', '利用HM、ANQ、YJ已测地形图。1幅=1 km&sup2;，共58.0 km&sup2;');
INSERT INTO `cmc_contract_work` VALUES (565, '1648881414641025025', 'JW梯级基于航拍影像的电子沙盘1:5000', '1:5000', '幅', '103.20', '2022-10-31', '1幅=6.25 km&sup2;,共645 km&sup2;');
INSERT INTO `cmc_contract_work` VALUES (566, '1648881414641025025', 'JW电站整体数字模型(含DEM和DOM)1:5000', '1:5000', '幅', '103.20', '2022-10-31', '1幅=6.25 km&sup2;,共645 km&sup2;');
INSERT INTO `cmc_contract_work` VALUES (567, '1648881414641025025', '1:500地形图测绘', '1:500', 'km²', '3.40', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (568, '1648881414641025025', '库区1:2000地形地类图新测', '1:2000', 'km²', '210.00', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (569, '1648881414641025025', '库区1:2000地形地类图调绘', '1:2000', 'km²', '413.00', '2022-10-31', '其中吞白沟60.0km2，麦朗沟53.43km2，羌纳乡46.41km2。');
INSERT INTO `cmc_contract_work` VALUES (570, '1648881414641025025', '1:1000地形图测量及三维地形面', '1:1000', 'km²', '16.03', '2022-10-31', '派镇工区麦朗沟、吞白沟、蹦嘎沟');
INSERT INTO `cmc_contract_work` VALUES (571, '1648881414641025025', '米林坝下-尼洋河口-直白段1:2000地形图测绘', '1:2000', 'km²', '227.56', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (572, '1648881414641025025', '1:1000横断面测量', '1:1000', 'km', '84.00', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (573, '1648881414641025025', '横断面基点测量', NULL, '点', '138.00', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (574, '1648881414641025025', '直白至扎曲1:2000地形图测绘', '1:2000', 'km²', '89', '2022-10-31', '利用已有机载激光数据内业生成DLG，外业修测');
INSERT INTO `cmc_contract_work` VALUES (575, '1648881414641025025', '雅尼湿地公园河段部分1:1000地形图测绘', '1:1000', 'km²', '78.28', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (576, '1648881414641025025', '雅尼湿地补充上部河段1:1000地形图测绘', '1:1000', 'km²', '4.68', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (577, '1648881414641025025', '林芝机场段1:1000地形图测绘', '1:1000', 'km²', '2.38', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (578, '1648881414641025025', '林芝机场上游局部河段1:1000地形图测绘', '1:1000', 'km²', '7', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (579, '1648881414641025025', '1:1000地形图缩编成1:2000地形图', '1:2000', 'km²', '92.34', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (580, '1648881414641025025', '坐标转换（转成2000国家大地坐标）', NULL, '点', '469.00', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (581, '1648881414641025025', '航摄影像（以上1:2000用图范围）', NULL, 'km²', '319.9', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (582, '1648881414641025025', 'ML水库电站', NULL, NULL, NULL, '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (583, '1648881414641025025', '康扎、拉丁料场等1:2000地形图测绘', '1:2000', 'km²', '75', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (584, '1648881414641025025', '米瑞料场1:2000地形图测绘', '1:2000', 'km²', '16', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (585, '1648881414641025025', '坝址工区1:2000地形图测绘', '1:2000', 'km²', '198.5', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (586, '1648881414641025025', '其他零星边缘增加1:2000地形图测绘', '1:2000', 'km²', '30.2', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (587, '1648881414641025025', '南伊沟口1:500地形图测绘', '1:500', 'km²', '0.72', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (588, '1648881414641025025', '扎西塘修复所1:500地形图测绘', '1:500', 'km²', '1.35', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (589, '1648881414641025025', '航摄影像（以上1:2000用图范围）', NULL, 'km²', '319.7', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (590, '1648881414603276289', '2021年羊湖电站第八期压力钢管永久变形监测网校核技术服务工作', NULL, '项', '1', '2022-11-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (591, '1648881414582304770', 'E 级 GNSS 控制测量', 'E级', '点', '6', '2022-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (592, '1648881414582304770', '岸上地形测量', '1:500', 'km²', '6.2', '2022-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (593, '1648881414582304770', '水下地形测量', '1:500', 'km²', '3', '2022-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (594, '1648881414544556034', '2020-2023年度县本级重点区域自然资源统一确权登记服务项目涉及5个国有林场、10座水库、8个矿山。项目具体实施安排详见合同第三条中的工作表格。', NULL, '项', '1', NULL, '2020-2021年度计划实施的项目，乙方应在2021年12月31日前完成项目主体工作任务，向甲方提交成果；2022-2023年度计划实施的项目，乙方应在当年11月15日前完成项目主体工作任务，向甲方提交成果。具体时间要求以部、省、市相关最新要求为准。');
INSERT INTO `cmc_contract_work` VALUES (595, '1648881414527778817', '土建', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (596, '1648881414527778817', '三等平面观测墩标', '三等', '点', '8', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (597, '1648881414527778817', '三等平面观测地面砼标', '三等', '点', '6', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (598, '1648881414527778817', '二等基本水准点', '二等', '点', '2', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (599, '1648881414527778817', '二等普通水准点', '二等', '点', '2', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (600, '1648881414527778817', '便道修筑', NULL, '米', '2000', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (601, '1648881414527778817', '首次观测', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (602, '1648881414527778817', '四等GNSS平面控制网引测', '四等', '点', '6', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (603, '1648881414527778817', '四等水准引测', '四等', 'km', '3', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (604, '1648881414527778817', '三等边观测', '三等', '条', '6', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (605, '1648881414527778817', '三等GPS观测', '三等', '点', '14', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (606, '1648881414527778817', '二等水准观测', '二等', 'km', '34.49', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (607, '1648881414527778817', '1:500水边线测量', '1:500', 'km', '1.6', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (608, '1648881414527778817', '358m和360m等高线现场测点', NULL, '点', '282', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (609, '1648881414527778817', '1954北京坐标转换成国家2000大地坐标系', NULL, '点', '300', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (610, '1648881414511001602', '白格滑坡区1:1000倾斜摄影（无人机影像数据采集）', '1:1000', 'km²', '2.2', '2021-12-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (611, '1648881414511001602', '1:1000地形图测绘', '1:1000', 'km²', '2.2', '2021-12-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (612, '1648881414511001602', '白格滑坡区1:1000三维模型制作', '1:1000', '幅', '8.8', '2021-12-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (613, '1648881414511001602', '白格滑坡区1:1000正射影像大图制作', '1:1000', '幅', '8.8', '2021-12-08', NULL);
INSERT INTO `cmc_contract_work` VALUES (614, '1648881414473252866', '汤坝新址1:500地形地类图测绘', '1:500', 'km²', '0.30', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (615, '1648881414473252866', '金汤小学旧址后坡危石1:1000地形图测绘', '1:1000', 'km²', '0.25', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (616, '1648881414473252866', '汤坝料场现场测坐标转换点', NULL, '点', '4', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (617, '1648881414473252866', '汤坝料场坐标转换（转成国家2000大地坐标）', NULL, '点', '25', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (618, '1648881414473252866', '磨子沟取水口1:500地形图测绘', '1:500', 'km²', '0.2', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (619, '1648881414473252866', '牛棚子村1:1000地形图测绘', '1:1000', 'km²', '0.3', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (620, '1648881414473252866', '牛棚子沟1:500地形图测绘', '1:500', 'km²', '0.1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (621, '1648881414473252866', '牛棚子沟1:500断面测量', '1:500', 'km', '1.88', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (622, '1648881414473252866', '牛棚子沟特征点测量', NULL, '点', '10', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (623, '1648881414473252866', '五等控制点测量', NULL, '点', '6', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (624, '1648881414473252866', '新联土料场复垦1:1000地形图测绘', '1:1000', 'km²', '0.8', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (625, '1648881414473252866', '部引水工程1:1000地形图测绘', '1:1000', 'km²', '1.78', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (626, '1648881414473252866', '外部引水工程现场配合测量', NULL, '点', '70', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (627, '1648881414473252866', '新联料场四等三角高程测量', NULL, 'km', '29', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (628, '1648881414473252866', '野坝1:500地形图测绘', '1:500', 'km²', '0.07', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (629, '1648881414473252866', '孙家沟实物指标配合测量', NULL, '人.天', '9', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (630, '1648881414389366785', '工程区1：5000地形地类图测绘', '1:5000', 'km²', '64', '2022-08-22', '合同签订后第二日起40天内完成。');
INSERT INTO `cmc_contract_work` VALUES (631, '1648881414389366785', '坝址区1：1000地形地类图测绘（含水下地形）', '1:1000', 'km²', '3.2', '2022-08-22', '同上');
INSERT INTO `cmc_contract_work` VALUES (632, '1648881414389366785', '厂址区1：1000地形地类图测绘（含水下地形）', '1:1000', 'km²', '1.9', '2022-08-22', '同上');
INSERT INTO `cmc_contract_work` VALUES (633, '1648881414389366785', '工程区1：5000正射影像及三维地形面制作', '1:5000', 'km²', '64', '2022-08-22', '同上');
INSERT INTO `cmc_contract_work` VALUES (634, '1648881414389366785', '厂址、坝址区1：1000正射影像及三维地形面制作', '1:1000', 'km²', '5.1', '2022-08-22', '同上');
INSERT INTO `cmc_contract_work` VALUES (635, '1648881414389366785', '二等GNSS联测', '二等', '点', '8', '2022-08-22', '同上');
INSERT INTO `cmc_contract_work` VALUES (636, '1648881414389366785', '三等GNSS测量', '三等', '点', '12', '2022-08-22', '同上');
INSERT INTO `cmc_contract_work` VALUES (637, '1648881414389366785', '四等高程测量', '四等', 'km', '74.79', '2022-08-22', '同上');
INSERT INTO `cmc_contract_work` VALUES (638, '1648881414355812353', '1:2000线路地形图测绘', '1:2000', 'km²', '1.66', NULL, '本合同总工期为 15 天，自合同签订之日起计算');
INSERT INTO `cmc_contract_work` VALUES (639, '1648881414355812353', '1:500取水口地形图测绘', '1:500', 'km²', '0.1', NULL, '本合同总工期为 15 天，自合同签订之日起计算');
INSERT INTO `cmc_contract_work` VALUES (640, '1648881414292897793', '五等控制点', '五等', '点', '10', NULL, '合同签订之日起算，30日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (641, '1648881414292897793', '1：2000地形图测量', '1:2000', 'km²', '7.74', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (642, '1648881414292897793', '1：2000地形面制作', '1:2000', 'km²', '7.74', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (643, '1648881414276120578', '五等控制点', '五等', '点', '9', NULL, '合同签订之日起算，30日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (644, '1648881414276120578', '1：2000地形图测量', '1:2000', 'km²', '10.37', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (645, '1648881414276120578', '1：2000地形面制作', '1:2000', 'km²', '10.37', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (646, '1648881414259343361', '五等控制点', '五等', '点', '10', NULL, '合同签订之日起算，30日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (647, '1648881414259343361', '1：2000地形图测量', '1:2000', 'km²', '11.53', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (648, '1648881414259343361', '1：2000地形面制作', '1:2000', 'km²', '11.53', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (649, '1648881414234177537', '1:1000地形图测绘', '1:1000', 'km²', '2.15', NULL, '8块地，预估工作量，以用户现场确认为准。合同签订后15个工作日内完成并提交。');
INSERT INTO `cmc_contract_work` VALUES (650, '1648881414234177537', '1:1000横断面测量', '1:1000', 'km', '4.8', NULL, '24条断面，200m/条。合同签订后15个工作日内完成并提交。');
INSERT INTO `cmc_contract_work` VALUES (651, '1648881414234177537', '五等GNSS测量', '五等', '点', '23', NULL, '合同签订后15个工作日内完成并提交。');
INSERT INTO `cmc_contract_work` VALUES (652, '1648881414192234498', '五等控制点', '五等', '点', '4', NULL, '合同签订之日起算，30日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (653, '1648881414192234498', '1：2000地形图测量', '1:2000', 'km²', '8.03', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (654, '1648881414192234498', '1：2000地形面制作', '1:2000', 'km²', '8.03', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (655, '1648881414116737025', '渣场1:1000地形图', '1:1000', 'km²', '0.238', '2021-12-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (656, '1648881414116737025', '石料场1:1000地形图', '1:1000', 'km²', '0.400', '2021-12-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (657, '1648881414066405379', '本工程隧道监测', NULL, '项', '1', NULL, '具体工作包括：①外业埋点（如果项目需要则理）、数据采集、现场巡查及监测数据处理，并上传甲方基础设施大数据平台：②完成成果报告编写、提交、过程资料整理归档等工作：③协助完成现场管理工作。');
INSERT INTO `cmc_contract_work` VALUES (658, '1648881414066405379', '本工程施工影响范围内的周边地表、管线、道路及建构筑物监测', NULL, '项', '1', NULL, '主要工作内容详见合同第二条中的工作量参考表。');
INSERT INTO `cmc_contract_work` VALUES (659, '1648881414066405379', '本工程深基坑、高边坡监测', NULL, '项', '1', NULL, '本项目工期为1460日历天。');
INSERT INTO `cmc_contract_work` VALUES (660, '1648881414066405378', '文殊坊周边环境综合提升工程测绘项目', NULL, '项', '1', NULL, '本项目工期 7 日历天，具体进场时间以甲方通知为准，并按要求的时间交付全部测量成果资料。');
INSERT INTO `cmc_contract_work` VALUES (661, '1648881413927993346', '料场1:1000地形图测量', '1:1000', 'km²', '0.07', NULL, '完成时间：按双方约定的时间。');
INSERT INTO `cmc_contract_work` VALUES (662, '1648881413927993346', '坐标转换', NULL, '点', '538', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (663, '1648881413927993346', '地质测绘', NULL, 'km²', '1.5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (664, '1648881413927993346', '料场钻探', NULL, 'm', '240', NULL, '4孔，每孔60m。');
INSERT INTO `cmc_contract_work` VALUES (665, '1648881413927993346', '取岩芯样', NULL, '组', '12', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (666, '1648881413927993346', '室内试验', NULL, '组', '12', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (667, '1648881413927993346', '勘察报告', NULL, '份', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (668, '1648881413927993346', '地质设代', NULL, '人月', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (669, '1648881413911216130', 'D级GNSS测量', 'D级', '点', '8', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (670, '1648881413911216130', 'E级GNSS测量', 'E级', '点', '20', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (671, '1648881413911216130', '五等导线测量（代替四等三角高程）', '四等', 'km', '27.6', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (672, '1648881413911216130', '航道整治工程1:2000江道图测绘（岸上）', '1:2000', 'km²', '14.74', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (673, '1648881413911216130', '航道整治工程1:2000江道图测绘（水下）', '1:2000', 'km²', '13.64', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (674, '1648881413911216130', '礁石区及码头1:500地形图测绘（含水下）', '1:500', 'km²', '0.7', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (675, '1648881413911216130', '洪水位点', NULL, '点', '50', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (676, '1648881413911216130', '坐标转换', NULL, '点', '128', '2022-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (677, '1648881413894438914', '川西大桥固床坝', '1:1000', 'km²', '0.724', NULL, '合同工期：本项项目测绘工期7个日历天。');
INSERT INTO `cmc_contract_work` VALUES (678, '1648881413894438914', '银白路工点二边坡', '1:1000', 'km²', '0.023', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (679, '1648881413894438914', '银白路工点三边坡', '1:1000', 'km²', '0.064', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (680, '1648881413894438914', '五等GNSS测量', '五等', '点', '12', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (681, '1648881413877661698', '1:2000地形图', '1:2000', 'km²', '8', '2022-06-07', NULL);
INSERT INTO `cmc_contract_work` VALUES (682, '1648881413877661698', '风机位1:500地形图测绘', '1:500', 'km²', '0.61', '2022-06-07', NULL);
INSERT INTO `cmc_contract_work` VALUES (683, '1648881413860884481', '雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测', NULL, '项', '1', '2022-12-31', '承包人承诺，将2017年度签订的雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测合同（合同编号：ETDC-201729）所缴纳的履约保证金（收据编号：9314072）263,535.00元，转入本年度合同。');
INSERT INTO `cmc_contract_work` VALUES (684, '1648881413751832578', '云南库区新增滑坡影响区实物指标调查配合测量（黄华）', NULL, '人.天', '90', NULL, '服务期限为自本合同签订之日起，至实物指标调查工作全部完成且相关成果通过甲方验收。');
INSERT INTO `cmc_contract_work` VALUES (685, '1648881413751832578', '云南库区新增滑坡影响区实物指标调查配合测量（务基）', NULL, '人.天', '75', NULL, '服务期限为自本合同签订之日起，至实物指标调查工作全部完成且相关成果通过甲方验收。');
INSERT INTO `cmc_contract_work` VALUES (686, '1648881413751832578', '云南库区新增滑坡影响区实物指标调查配合测量（大兴）', NULL, '人.天', '80', NULL, '服务期限为自本合同签订之日起，至实物指标调查工作全部完成且相关成果通过甲方验收。');
INSERT INTO `cmc_contract_work` VALUES (687, '1648881413751832578', '云南库区新增滑坡影响区实物指标调查配合测量（巧家）', NULL, '人.天', '60', NULL, '服务期限为自本合同签订之日起，至实物指标调查工作全部完成且相关成果通过甲方验收。');
INSERT INTO `cmc_contract_work` VALUES (688, '1648881413667946498', '牛棚子沟泥石流治理工程初步设计1:1000地形图测绘', '1:1000', 'km²', '0.52', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (689, '1648881413667946498', '牛棚子沟泥石流治理工程拟设坝区域1:500地形图测绘', '1:500', 'km²', '0.16', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (690, '1648881413667946498', '1:200断面测量', '1:200', 'km', '0.4', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (691, '1648881413667946498', '断面基点测量', NULL, '点', '4', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (692, '1648881413667946498', '磨子沟取水口1:500地形图测绘', '1:500', 'km²', '0.1', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (693, '1648881413667946498', '汤坝村1:500地形图测绘', '1:500', 'km²', '0.1', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (694, '1648881413667946498', '长河坝水电站观庄子土地复垦1:500地形图测绘', '1:500', 'km²', '0.1', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (695, '1648881413651169282', '猴子岩小金县焦子坪移民安置点1：500地形地类图转西安80坐标系', NULL, '点', '20', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (696, '1648881413651169282', '猴子岩小金县焦子坪移民安置点1：2000地形地类图转西安80坐标系', NULL, '点', '72', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (697, '1648881413651169282', '小金县移民安置点测量控制点现场查找及控制点破坏重建恢复配合测量', NULL, '人.天', '13', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (698, '1648881413651169282', '小金县移民安置点坐标转换（不足25点按25计）', NULL, '点', '25', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (699, '1648881413651169282', '三等GPS观测', '三等', '点', '12', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (700, '1648881413651169282', '五等导线测量（四等三角高程）', '四等', 'km', '6.8', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (701, '1648881413651169282', '引水线路1:2000地形地类图测绘', '1:2000', 'km²', '2.06', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (702, '1648881413651169282', '生产用水取水口地形图1：500（按最小面积计）', '1:500', 'km²', '0.2', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (703, '1648881413651169282', '生产引水线路带状地形图1：2000', '1:2000', 'km²', '0.5', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (704, '1648881413651169282', '孔玉乡折洛沟公路管道1:1000地形图测绘', '1:1000', 'km²', '1.14', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (705, '1648881413651169282', '孔玉乡折洛沟取水口1:500地形图测绘（3处比选）', '1:500', 'km²', '0.3', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (706, '1648881413651169282', '折洛沟五等导线测量（代替四等三角高程）', '四等', 'km', '7', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (707, '1648881413651169282', '五等GNSS控制点测量', '五等', '点', '9', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (708, '1648881413651169282', '管线配合测量', NULL, '人.天', '6', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (709, '1648881413584060417', '1:1000断面测量', '1:1000', 'km', '0.90', NULL, '合同签订后第二日起10日内完成。');
INSERT INTO `cmc_contract_work` VALUES (710, '1648881413584060417', '1:1000地形测量（岸上部分）', '1:1000', 'km', '0.40', NULL, '合同签订后第二日起10日内完成。');
INSERT INTO `cmc_contract_work` VALUES (711, '1648881413584060417', '1:1000地形测量（水下部分）', '1:1000', 'km', '0.20', NULL, '合同签订后第二日起10日内完成。');
INSERT INTO `cmc_contract_work` VALUES (712, '1648881413584060417', '1:1000水边线测量', '1:1000', 'km', '4.60', NULL, '合同签订后第二日起10日内完成。');
INSERT INTO `cmc_contract_work` VALUES (713, '1648881413584060417', '流量测验', NULL, '个', '2', NULL, '合同签订后第二日起10日内完成。');
INSERT INTO `cmc_contract_work` VALUES (714, '1648881413584060417', '桥梁、施工场平临建设施等建筑物轮廓及地面高程', NULL, '点', '317', NULL, '合同签订后第二日起10日内完成。');
INSERT INTO `cmc_contract_work` VALUES (715, '1648881413584060417', '断面基点测量', NULL, '点', '6', NULL, '合同签订后第二日起10日内完成。');
INSERT INTO `cmc_contract_work` VALUES (716, '1648881413512757249', '1:500地形图测绘', '1:500', 'km²', '0.98', NULL, '本项项目测绘工期45个日历天，施工总工期为36个月，质保期满后，若施工期内测绘存在质量问题等，投标人须进行无偿修补或重新测量。');
INSERT INTO `cmc_contract_work` VALUES (717, '1648881413512757249', '1:200断面测量', '1:200', 'km', '3.00', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (718, '1648881413512757249', '中桩测量', NULL, 'km', '1.7316', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (719, '1648881413512757249', '三等GPS测量', '三等', '点', '19', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (720, '1648881413512757249', '三等高程测量', '三等', 'km', '44.85', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (721, '1648881413500174338', '云南省国道G213桧溪至黄华丫口段公路航空摄影及1：2000地形图测绘工作', '1:2000', 'km²', '26.3 ', NULL, '协议签订后，乙方2日内组织自有专业技术人员配合甲方开展工作，15日内完成成果资料并提交，如遇不可抗力工期顺延。');
INSERT INTO `cmc_contract_work` VALUES (722, '1648881413483397121', '中坝址~楞古上坝址1:2000地形图（岸上部分） ', '1:2000', 'km²', '0.53', '2022-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (723, '1648881413483397121', '中坝址~楞古上坝址1:2000地形图（水下部分）', '1:2000', 'km²', '0.13', '2022-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (724, '1648881413483397121', '1:1000水下地形图', '1:1000', 'km²', '2.35', '2022-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (725, '1648881413483397121', '上坝址至孟底沟库尾1:1000大断面', '1:1000', '个', '30', '2022-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (726, '1648881413483397121', '力丘河汇口以上1:1000大断面', '1:1000', '个', '2', '2022-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (727, '1648881413483397121', 'CD186-YK-13-10（8）牙根二级施工永久用地范围图坐标转换', NULL, '点', '92', '2022-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (728, '1648881413483397121', '楞古施工总布置 楞古的上、中坝址轴线坐标转换', NULL, '点', '82', '2022-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (729, '1648881413483397121', '雅砻江管理范围线转CAD坐标转换', NULL, '点', '156 ', '2022-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (730, '1648881413483397121', '附图6-28楞古闸坝水电站枢纽平面总布置图（方案二）转成矢量图', NULL, '点', '80', '2022-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (731, '1648881413483397121', '断面基点测量', NULL, '点', '64', '2022-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (732, '1648881413462425602', '对工程区范围内需要进行明挖和填筑的范围（包括但不限于上水库区域、下水库区域、开关站区域、场内道路区域、业主营地等），采用三维测量技术进行测量。将工程区域的道路、建筑、水库等三维测量数据与三维地形数据（三维模型）进行融合。除整体地形数据建模外，每一次测量需出具对比结算工程量分析报告。', NULL, '项', '1', '2026-01-14', '技术服务期限：65个月(2020年8月15日至2026年1月14日)，具体以完成施工期各阶段现场地形测量工作并提出相应工作报告为准。');
INSERT INTO `cmc_contract_work` VALUES (733, '1648881413412093953', '库区局部1:1000地形图测绘（岸上实测部分）', '1:1000', 'km²', '5.44 ', NULL, '合同签订后第二日起40天内完成。下同。');
INSERT INTO `cmc_contract_work` VALUES (734, '1648881413412093953', '库区局部1:1000地形图测绘（水下实测部分）', '1:1000', 'km²', '2.56', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (735, '1648881413412093953', '水库1:1000地形图测绘', '1:1000', 'km²', '2.50 ', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (736, '1648881413412093953', '牙根二级及楞古工区施工总布置范围1:5000地形图', '1:5000', 'km²', '122.00', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (737, '1648881413412093953', '库区1:2000地形地类图测绘', '1:2000', 'km²', '35.00', NULL, '按测量范围计算，淹没线（2560m）以上100m左右岸范围总量约43km&sup2;（含蓄水位以下23.6km&sup2;），与库区第1项（库区局部1:1000地形图重合8km&sup2;）。');
INSERT INTO `cmc_contract_work` VALUES (738, '1648881413412093953', '库区局部1:1000缩编为1:2000地形图', '1:2000', 'km²', '8.00 ', NULL, '按测量范围计算，淹没线（2560m）以上100m左右岸范围总量约43km&sup2;（含蓄水位以下23.6km&sup2;），与库区第1项（库区局部1:1000地形图重合8km&sup2;）。');
INSERT INTO `cmc_contract_work` VALUES (739, '1648881413412093953', '1:2000缩编部分地类测绘', '1:2000', 'km²', '8.00', NULL, '按测量范围计算，淹没线（2560m）以上100m左右岸范围总量约43km&sup2;（含蓄水位以下23.6km&sup2;），与库区第1项（库区局部1:1000地形图重合8km&sup2;）。');
INSERT INTO `cmc_contract_work` VALUES (740, '1648881413412093953', '米龙集镇、麻郎错集镇、八依绒集镇新址1:1000地形地类图测绘', '1:1000', 'km²', '3.50', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (741, '1648881413412093953', '1:1000断面测量', '1:1000', 'km', '95.00 ', NULL, '约95km，间隔2km左右一个。');
INSERT INTO `cmc_contract_work` VALUES (742, '1648881413412093953', '中坝址1:500地形图测绘（岸上部分）', '1:500', 'km²', '2.8', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (743, '1648881413412093953', '中坝址1:500地形图测绘（水下部分）', '1:500', 'km²', '0.70', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (744, '1648881413412093953', '料场1:1000地形图测绘', '1:1000', 'km²', '1.50', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (745, '1648881413412093953', '日岗沟渣场1:1000地形图测绘', '1:1000', 'km²', '0.50 ', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (746, '1648881413412093953', '日衣村下游支沟1:1000地形图测绘', '1:1000', 'km²', '2.60', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (747, '1648881413412093953', '木灰沟施工场地1:1000地形图测绘', '1:1000', 'km²', '3.13', NULL, '总量3.5km&sup2;，新测3.13km&sup2;，缩编0.37 km&sup2;。（与中坝址1:500地形图重合0.37km&sup2;）。');
INSERT INTO `cmc_contract_work` VALUES (748, '1648881413412093953', '1:500地形图缩编为1:1000地形图', '1:1000', 'km²', '0.37', NULL, '总量3.5km&sup2;，新测3.13km&sup2;，缩编0.37 km&sup2;。（与中坝址1:500地形图重合0.37km&sup2;）。');
INSERT INTO `cmc_contract_work` VALUES (749, '1648881413412093953', '力丘河施工场地1:1000地形图测绘', '1:1000', 'km²', '0.50', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (750, '1648881413412093953', '二等GPS测量', '二等', '点', '8', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (751, '1648881413412093953', '三等GPS测量', '三等', '点', '25 ', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (752, '1648881413412093953', '五等导线', '五等', 'km', '120', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (753, '1648881413412093953', '三等高程测量', '三等', 'km', '260', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (754, '1648881413412093953', '四等高程测量', '四等', 'km', '66', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (755, '1648881413412093953', '断面基点测量', NULL, '点', '100', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (756, '1648881413395316737', '乳源高新区绿之源西侧地块标准厂房建设项目沉降监测项目', NULL, '次', '12', NULL, '观测频次为1个月一次，自2022年01月起实施，观测周期按照一年执行，则合同期内共观测12次（提交12次监测报告）。');
INSERT INTO `cmc_contract_work` VALUES (757, '1648881413361762305', '以部下发的2021年度变更调查遥感监测成果为基础，结合各级2021年度内开展的月度、季度或半年监测发现的各类国土利用变化信息，制作2021年度变更调查外业调查工作底图（以下简称“工作底图”）。', NULL, '项', '1', '2022-05-31', '2022年5月31日前，完成2021年度变更调查成果整改和完善工作');
INSERT INTO `cmc_contract_work` VALUES (758, '1648881413361762305', '以实地现状认定地类为原则，调查工作底图上每一块变化图斑的地类、属性、范围、权属等 实际情况；对实际地类与卫星遥感影像判读不一致的及按要求需要举证的图斑，逐一实地拍照举证。', NULL, '项', '1', '2022-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (759, '1648881413361762305', '在2020年度国土调查数据库基础上，按照数据库更新技术要求，形成2021年度国土变更调查更新数据增量包，报四川省国土资源厅和自然资源部。', NULL, '项', '1', '2022-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (760, '1648881413361762305', '部省组织专业队伍对2021年度变更调查更新数据的真实性，对内业核查发现的疑似错误图斑，作业单位实地核实整改、补充举证并上报整改成果。', NULL, '项', '1', '2022-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (761, '1648881413361762305', '开展2020年度和2021年度耕资源质量分类成果更新与监测。', NULL, '项', '1', '2022-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (762, '1648881413361762305', '（6）部省市要求的关于2021年度国土变更调查除以上内容之外的相关工作。', NULL, '项', '1', '2022-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (763, '1648881413344985090', 'Z1～Z2镇墩间钢管位移监测 ', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成。');
INSERT INTO `cmc_contract_work` VALUES (764, '1648881413344985090', '压力钢管伸缩节变形监测', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成。');
INSERT INTO `cmc_contract_work` VALUES (765, '1648881413344985090', 'Z13镇墩基础及周边边坡稳定监测', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成。');
INSERT INTO `cmc_contract_work` VALUES (766, '1648881413344985090', '水工检查', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成。');
INSERT INTO `cmc_contract_work` VALUES (767, '1648881413344985090', '羊湖压力钢管资料整编分析', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成。');
INSERT INTO `cmc_contract_work` VALUES (768, '1648881413344985090', '沉降、水平位移测量', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成。');
INSERT INTO `cmc_contract_work` VALUES (769, '1648881413344985090', '引水隧洞洞身等情况，伸缩缝开合和止水情况', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成。');
INSERT INTO `cmc_contract_work` VALUES (770, '1648881413344985090', '水工检查', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成。');
INSERT INTO `cmc_contract_work` VALUES (771, '1648881413344985090', '资料整编分析', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成。');
INSERT INTO `cmc_contract_work` VALUES (772, '1648881413328207874', '混凝土溢流冲砂坝墩变形观测', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成。');
INSERT INTO `cmc_contract_work` VALUES (773, '1648881413328207874', '变形监测控制网观测', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (774, '1648881413328207874', '一等三角观测（变形监测控制网）', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (775, '1648881413328207874', '一等边长测量（变形监测控制网）', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (776, '1648881413328207874', '一等三角观测（视准线工作基点）', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (777, '1648881413328207874', '一等边长测量（视准线工作基点）', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (778, '1648881413328207874', '一等三角观测（自动化监测工作基点）', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (779, '1648881413328207874', '一等边长测量（自动化监测工作基点）', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (780, '1648881413328207874', '三等光电测距三角高程测量', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (781, '1648881413328207874', '一等水准测量', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (782, '1648881413328207874', '网形及点位设计', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (783, '1648881413328207874', '资料整编分析', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (784, '1648881413328207874', '安全监测巡视', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (785, '1648881413265293314', '1:2000大断面测量', '1:2000', 'km', '6.4', '2023-02-27', '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (786, '1648881413265293314', '断面基点测量', NULL, '点', '13', '2023-02-27', '同上');
INSERT INTO `cmc_contract_work` VALUES (787, '1648881413265293314', '1:10000地形图测绘', '1:10000', 'km²', '7.6', '2023-02-27', '同上');
INSERT INTO `cmc_contract_work` VALUES (788, '1648881413265293314', '1:2000炸药库地形图测绘', '1:2000', 'km²', '0.85', '2023-02-27', '同上');
INSERT INTO `cmc_contract_work` VALUES (789, '1648881413265293314', '1:1000水面线测量', '1:1000', 'km', '17.7', '2023-02-27', '同上');
INSERT INTO `cmc_contract_work` VALUES (790, '1648881413265293314', '视频航拍', NULL, 'km', '10', '2023-02-27', '同上');
INSERT INTO `cmc_contract_work` VALUES (791, '1648881413265293314', '库区垫高防护工程及供水水源雅嘎措1:1000地形图测绘', '1:1000', 'km²', '1.16', '2023-02-27', '同上');
INSERT INTO `cmc_contract_work` VALUES (792, '1648881413265293314', '五等GNSS测量', '五等', '点', '10', '2023-02-27', '同上');
INSERT INTO `cmc_contract_work` VALUES (793, '1648881413265293314', '紫霞征地红线SHP制作', NULL, '点', '224', '2023-02-27', '同上');
INSERT INTO `cmc_contract_work` VALUES (794, '1648881413244321794', '大邑抽水蓄能测绘技术服务', NULL, NULL, NULL, NULL, '大邑抽水蓄能测绘技术服务：合同签订之日起算，30日历天内完成；');
INSERT INTO `cmc_contract_work` VALUES (795, '1648881413244321794', '五等控制点', '五等', '点', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (796, '1648881413244321794', '1：5000地形图测量', '1:5000', 'km²', '4.92', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (797, '1648881413244321794', '1：2000地形地类图测量', '1:2000', 'km²', '4.89', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (798, '1648881413244321794', '1：2000地形图缩编成1:5000地形图', '1:5000', 'km²', '4.89', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (799, '1648881413244321794', '1：5000地形面制作', '1:5000', 'km²', '9.81', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (800, '1648881413244321794', '1：2000地形面制作', '1:2000', 'km²', '4.89', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (801, '1648881413244321794', '倾斜摄影及三维建模（1：1000）', '1:1000', 'km²', '9.81', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (802, '1648881413244321794', '绵竹抽水蓄能测绘技术服务', NULL, NULL, NULL, NULL, '绵竹抽水蓄能测绘技术服务：合同签订之日起算，30日历天内完成；');
INSERT INTO `cmc_contract_work` VALUES (803, '1648881413244321794', '五等控制点', '五等', '点', '10', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (804, '1648881413244321794', '1：5000地形图测量', '1:5000', 'km²', '9.88', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (805, '1648881413244321794', '1：2000地形地类图测量', '1:2000', 'km²', '18.86', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (806, '1648881413244321794', '1：5000地形面制作', '1:5000', 'km²', '9.88', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (807, '1648881413244321794', '1：2000地形面制作', '1:2000', 'km²', '18.86', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (808, '1648881413244321794', '江油抽水蓄能测绘技术服务（初次选址）', NULL, NULL, NULL, NULL, '江油抽水蓄能测绘技术服务：合同签订之日起算，30日历天内完成；');
INSERT INTO `cmc_contract_work` VALUES (809, '1648881413244321794', '五等控制点', '五等', '点', '9', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (810, '1648881413244321794', '1：5000地形图测量', '1:5000', 'km²', '10.23', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (811, '1648881413244321794', '1：2000地形图测量', '1:2000', 'km²', '10.69', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (812, '1648881413244321794', '1：2000地形图缩编成1:5000地形图', '1:5000', 'km²', '10.69', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (813, '1648881413244321794', '1：5000地形面制作', '1:5000', 'km²', '20.92', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (814, '1648881413244321794', '1：2000地形面制作', '1:2000', 'km²', '10.69', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (815, '1648881413244321794', '江油县（二次选址）', NULL, NULL, NULL, NULL, '江油抽水蓄能测绘技术服务：合同签订之日起算，30日历天内完成；');
INSERT INTO `cmc_contract_work` VALUES (816, '1648881413244321794', '五等控制点', '五等', '点', '8', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (817, '1648881413244321794', '工程区1：5000地形图测量', '1:5000', 'km²', '12.53', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (818, '1648881413244321794', '上、下库、输水线路1：2000地形地类图测量', '1:2000', 'km²', '22.53', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (819, '1648881413244321794', '1：2000地形图缩编成1:5000地形图', '1:5000', 'km²', '22.53', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (820, '1648881413244321794', '工程区1：5000三维地形面制作', '1:5000', 'km²', '35.06', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (821, '1648881413244321794', '上、下库、输水线路1：2000三维地形面制作', '1:2000', 'km²', '22.53', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (822, '1648881413244321794', '芦山抽水蓄能测绘技术服务', NULL, NULL, NULL, NULL, '屏山抽水蓄能测绘技术服务：合同签订之日起算，30日历天内完成；');
INSERT INTO `cmc_contract_work` VALUES (823, '1648881413244321794', '五等控制点', '五等', '点', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (824, '1648881413244321794', '1：5000地形图测量', '1:5000', 'km²', '15.63', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (825, '1648881413244321794', '1：2000地形地类图测量', '1:2000', 'km²', '13.64', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (826, '1648881413244321794', '1：2000地形图缩编成1:5000地形图', '1:5000', 'km²', '13.64', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (827, '1648881413244321794', '1：5000地形面制作', '1:5000', 'km²', '29.27', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (828, '1648881413244321794', '1：2000地形面制作', '1:2000', 'km²', '13.64', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (829, '1648881413244321794', '南江抽水蓄能测绘技术服务', NULL, NULL, NULL, NULL, '南江抽水蓄能测绘技术服务：合同签订之日起算，30日历天内完成；芦山抽水蓄能测绘技术服务：合同签订之日起算，45日历天内完成；');
INSERT INTO `cmc_contract_work` VALUES (830, '1648881413244321794', '五等控制点', '五等', '点', '10', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (831, '1648881413244321794', '1：5000地形图测量', '1:5000', 'km²', '10.74', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (832, '1648881413244321794', '1：2000地形地类图测量', '1:2000', 'km²', '11.17', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (833, '1648881413244321794', '1：2000地形图缩编成1:5000地形图', '1:5000', 'km²', '11.17', NULL, '说明：由于系统录入限制，其他工作内容详见合同文本第1.2 合同工作内容。');
INSERT INTO `cmc_contract_work` VALUES (834, '1648881413227544578', '沙坝弃渣回采料场1:1000地形图测绘', '1:1000', 'km²', '0.24', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (835, '1648881413227544578', '九架棚弃渣回采料场1:1000地形图测绘', '1:1000', 'km²', '0.24', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (836, '1648881413227544578', '五等GNSS测量', '五等', '点', '6.00', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (837, '1648881413181407233', '广东梅县抽水蓄能电站工程区地形图1:5000（按1:1000精度航飞）', '1:5000', 'km²', '45.85', NULL, '（1）合同签订日期第二日起算，15日历天内完成外业工作；（2）最终成果报告：合同签订后30日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (838, '1648881413181407233', '广东梅县抽水蓄能电站工程区1:5000正射影像', '1:5000', 'km²', '45.85', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (839, '1648881413181407233', '广东梅县抽水蓄能电站工程区1:5000三维地形面', '1:5000', 'km²', '45.85', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (840, '1648881413181407233', '广东梅县抽水蓄能电站杨背樟料场区地形图1:5000（按1:1000精度航飞）', '1:5000', 'km²', '4.32', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (841, '1648881413181407233', '五等GNSS测量', '五等', '点', '12', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (842, '1648881413164630018', '1:1000地形图测绘', '1:1000', 'km²', '1.7', NULL, '本合同总工期为 15 天，自合同签订之日起计算。');
INSERT INTO `cmc_contract_work` VALUES (843, '1648881413164630018', '1:500地形图测绘', '1:500', 'km²', '0.05', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (844, '1648881413164630018', '五等GNSS测量', '五等', '点', '6', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (845, '1648881413164630018', '1:500地形图坐标及高程转换', NULL, '点', '19', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (846, '1648881413164630018', '1:1000地形图（含水下）坐标及高程转换', NULL, '点', '144', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (847, '1648881413164630018', '四等GNSS坐标联测', NULL, '点', '5', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (848, '1648881413164630018', '四等水准联测', NULL, 'km', '4.76', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (849, '1648881413147852802', '金上～湖北±800千伏直流工程实物指标调查测绘配合', NULL, '项', '1', NULL, '服务期限为自本合同签订之日起，至实物指标调查工作全部完成且相关成果通过甲方验收。');
INSERT INTO `cmc_contract_work` VALUES (850, '1648881413131075586', '四等GNSS测量', '四等', '点', '6.00', NULL, '合同签订后一个月完成');
INSERT INTO `cmc_contract_work` VALUES (851, '1648881413131075586', '四等高程测量', '四等', 'km', '10.00', NULL, '合同签订后一个月完成');
INSERT INTO `cmc_contract_work` VALUES (852, '1648881413131075586', '1:1000地形测量（水下）', '1:1000', 'km²', '0.56', NULL, '合同签订后一个月完成');
INSERT INTO `cmc_contract_work` VALUES (853, '1648881413131075586', '1:1000地形测量（岸上）', '1:1000', 'km²', '0.14', NULL, '合同签订后一个月完成');
INSERT INTO `cmc_contract_work` VALUES (854, '1648881413131075586', '1:5000地形测量（水下）', '1:5000', 'km²', '13.91', NULL, '合同签订后一个月完成');
INSERT INTO `cmc_contract_work` VALUES (855, '1648881413131075586', '1:5000地形测量（岸上）', '1:5000', 'km²', '3.48', NULL, '合同签订后一个月完成');
INSERT INTO `cmc_contract_work` VALUES (856, '1648881413131075586', '1:5000地形图放大为1:2000地形图', '1:2000', 'km²', '17.39', NULL, '合同签订后一个月完成');
INSERT INTO `cmc_contract_work` VALUES (857, '1648881413093326850', '施工段水下地形1:500地形图', '1:500', 'km²', '0.354', '2022-05-30', '长度5.06km，平均宽度70m（结算时按实际发生工程量为准）');
INSERT INTO `cmc_contract_work` VALUES (858, '1648881413072355329', '对上库先进行1：500全野外数字化地形图测量，构建高程模型（DEM），计算上水库库容曲线。', '1:500', 'km²', '0.6', '2022-12-31', '自合同签订之日12个月完成数据收集和资料整理，具体开工以甲方通知为准，计划下水库2022年4月开始数据采集工作，资料整理30日内完成，上水库2022年9月开始数据采集工作，资料整理30日内完成，最终资料按照甲方档案要求提交。');
INSERT INTO `cmc_contract_work` VALUES (859, '1648881413072355329', '对下库先进行1：500全野外数字化地形图测量，构建高程模型（DEM），分别计算下水库库容曲线。', '1:500', 'km²', '0.4', '2022-12-31', '自合同签订之日12个月完成数据收集和资料整理，具体开工以甲方通知为准，计划下水库2022年4月开始数据采集工作，资料整理30日内完成，上水库2022年9月开始数据采集工作，资料整理30日内完成，最终资料按照甲方档案要求提交。');
INSERT INTO `cmc_contract_work` VALUES (860, '1648881413030412290', '施工用地范围图及水库淹没影响区图（可研）坐标转换（1954北京坐标转成2000国家大地坐标）', NULL, '点', '144', '2022-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (861, '1648881413030412290', '施工用地范围图及水库淹没影响区图（可研）gdb数据库制作', NULL, '点', '144', '2022-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (862, '1648881413030412290', '五等GNSS测量（现场坐标点连测）', NULL, '点', '12', '2022-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (863, '1648881413009440769', '施工用地范围图（可研）坐标转换（1954北京坐标转成2000国家大地坐标）', NULL, '点', '144 ', '2022-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (864, '1648881413009440769', '施工用地范围图gdb数据库制作', NULL, '点', '144 ', '2022-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (865, '1648881413009440769', '水库淹没影响示意图坐标转换（1954北京坐标转成2000国家大地坐标）', NULL, '点', '48', '2022-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (866, '1648881413009440769', '水库淹没影响示意图gdb数据库制作', NULL, '点', '48', '2022-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (867, '1648881413009440769', '五等GNSS测量', '五等', '点', '16', '2022-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (868, '1648881412984274945', '泄洪洞出口左岸1:1000地形图测绘', '1:1000', 'km²', '0.05', NULL, '合同签订后第二日起5日内完成。');
INSERT INTO `cmc_contract_work` VALUES (869, '1648881412984274945', '泄洪洞出口右岸局部防护损毁处的坐标测量', NULL, '点', '14.00', NULL, '合同签订后第二日起5日内完成。');
INSERT INTO `cmc_contract_work` VALUES (870, '1648881412984274945', '五等GNSS测量', NULL, '点', '4.00', NULL, '合同签订后第二日起5日内完成。');
INSERT INTO `cmc_contract_work` VALUES (871, '1648881412946526209', '两河口水电站水光互补一期项目范围1：500地形', '1:500', 'km²', '26', NULL, '提交最终测绘成果时间不得晚于测绘进场工作后14日内');
INSERT INTO `cmc_contract_work` VALUES (872, '1648881412875223041', '山西左权箕山抽水蓄能电站工程区1:2000地形图', '1:2000', 'km²', '20.63', '2023-03-08', '合同签订后30日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (873, '1648881412875223041', '山西左权箕山抽水蓄能电站工程区1:2000三维地形面', '1:2000', 'km²', '20.63', '2023-03-08', '同上');
INSERT INTO `cmc_contract_work` VALUES (874, '1648881412875223041', '五等GNSS测量', '五等', '点', '9.00', '2023-03-08', '同上');
INSERT INTO `cmc_contract_work` VALUES (875, '1648881412812308481', '凉山州甘洛二号及沙岱地块光伏项目范围1：500地形图测绘', '1:500', 'km²', '12', NULL, '本项目测绘工作承包人应在确定为中标单位后的3日内进场，提交最终测绘成果时间不得晚于测绘进场工作后14日内。');
INSERT INTO `cmc_contract_work` VALUES (876, '1648881412774559745', '1:500 地形图补测', '1:500', 'km²', '0.6', NULL, '合同签订并生效后 30 天内完成。');
INSERT INTO `cmc_contract_work` VALUES (877, '1648881412774559745', '输水线路 1:2000 地形图补测（带状）', '1:2000', 'km²', '18', NULL, '合同签订并生效后 30 天内完成。');
INSERT INTO `cmc_contract_work` VALUES (878, '1648881412753588225', '泥洛沟取水口1:500地形图测绘', '1:500', 'km²', '0.1', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (879, '1648881412753588225', '泥洛河坝水厂新址1:500地形图测绘', '1:500', 'km²', '0.1', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (880, '1648881412753588225', '五等GNSS测量', '五等', '点', '12', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (881, '1648881412753588225', '焦子坪移民安置点1:500地形图测绘', '1:500', 'km²', '0.1', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (882, '1648881412753588225', '焦子坪引水线路1:1000地形图测绘', '1:1000', 'km²', '0.25', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (883, '1648881412753588225', '丹巴格宗移民安置点1:1000地形图测绘', '1:1000', 'km²', '0.25', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (884, '1648881412753588225', '菩提河坝安置场地后坡危岩治理工程设计变更1:500地形图测绘', '1:500', 'km²', '0.1', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (885, '1648881412736811010', '广西上林抽水蓄能电站工程区地形图1:5000（按1:1000精度航飞）', '1:5000', 'km²', '11.72', NULL, '（1）合同签订日期第二日起算，15日历天内完成外业工作；（2）最终成果报告：合同签订后30日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (886, '1648881412736811010', '广西上林抽水蓄能电站工程区1:5000正射影像及三维地形面', '1:5000', 'km²', '11.72', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (887, '1648881412736811010', '广西上林抽水蓄能电站溢洪道1:1000地形图测绘', '1:5000', 'km²', '0.33', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (888, '1648881412736811010', '广西上林抽水蓄能电站溢洪道1:1000三维地形面', '1:5000', 'km²', '0.33', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (889, '1648881412736811010', '五等GNSS测量', '五等', '点', '4', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (890, '1648881412682285058', '工程区1:5000地形图（岸上）', '1:5000', 'km²', '132.5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (891, '1648881412682285058', '工程区1:5000地形图（水下）', '1:5000', 'km²', '14.5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (892, '1648881412682285058', '右岸方案上库范围1:2000地形图', '1:2000', 'km²', '4.569', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (893, '1648881412682285058', '右岸方案下库进出水口1:2000地形图', '1:2000', 'km²', '2.873', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (894, '1648881412682285058', '工程区1:5000三维地形面', '1:5000', 'km²', '165.5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (895, '1648881412682285058', '右岸方案上库范围1:2000三维地形面', '1:2000', 'km²', '4.569', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (896, '1648881412682285058', '右岸方案下库进出水口1:2000三维地形面', '1:2000', 'km²', '2.873', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (897, '1648881412682285058', '四等GNSS测量', '四等', '点', '15', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (898, '1648881412682285058', '三角高等测量', '三等', 'km', '60', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (899, '1648881412631953410', '张牙沟35kV变电站1:500地形图测量', '1:500', 'km²', '0.07', NULL, '合同签订后次日起20日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (900, '1648881412631953410', '张牙沟民爆器材库1:500地形图测量', '1:500', 'km²', '0.17', NULL, '合同签订后次日起20日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (901, '1648881412631953410', '民爆器材库专用路1:500地形图测量', '1:500', 'km²', '0.56', NULL, '合同签订后次日起20日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (902, '1648881412631953410', '5#隧洞施工支洞现状纵剖面', '1:500', 'km²', '1', NULL, '合同签订后次日起20日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (903, '1648881412631953410', '5#隧洞施工支洞现状横剖面（纵向每10m间距一个测量断面，共9条）', NULL, 'km', '1.8', NULL, '合同签订后次日起20日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (904, '1648881412594204674', '拟建场址使用面积1:500地形图测绘', '1:500', 'km²', '16.16', NULL, '本项目地形图测绘工作承包人应在确定为中标单位后的3日内12本项目地形图测绘工作承包人应在确定为中标单位后的3日内进场，提交最终测绘成果时间不得晚于测绘进场工作后15日内。');
INSERT INTO `cmc_contract_work` VALUES (905, '1648881412573233153', '工程区1:2000地形图（含水下）', '1:2000', 'km²', '12.00', NULL, '合同签订后次日起30日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (906, '1648881412573233153', '左岸方案上库进出水口1:500地形图', '1:500', 'km²', '0.50', NULL, '合同签订后次日起30日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (907, '1648881412573233153', '左岸方案下库进出水口1:500地形图（含水下）', '1:500', 'km²', '0.68', NULL, '合同签订后次日起30日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (908, '1648881412514512898', '四等GNSS测量', '四等', '点', '14', '2023-03-08', '自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (909, '1648881412514512898', '四等高程测量', '四等', 'km', '45', '2023-03-08', '自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (910, '1648881412514512898', '1:1000地形地类图测绘', '1:1000', 'km²', '26', '2023-03-08', '自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (911, '1648881412514512898', '1:1000三维地形面制作', '1:1000', 'km²', '26', '2023-03-08', '自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (912, '1648881412514512898', '1:1000正射影像制作', '1:1000', 'km²', '26', '2023-03-08', '自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (913, '1648881412476764161', '叶巴滩抽蓄电站输水线路及发电厂房1:5000地形测量', '1:5000', 'km²', '8', NULL, '合同签订后次日起20天内完成');
INSERT INTO `cmc_contract_work` VALUES (914, '1648881412476764161', '叶巴滩抽蓄电站输水线路及发电厂房1:1000地形测量', '1:1000', 'km²', '4', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (915, '1648881412476764161', '无人机航拍原始影像、pos数据、像控点坐标', NULL, 'km²', '0.5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (916, '1648881412476764161', '实景三维模型（1:1000）', '1:1000', 'km²', '0.5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (917, '1648881412476764161', '三维地形面（1:1000）', '1:1000', 'km²', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (918, '1648881412476764161', '1:1000大断面测量', '1:1000', 'km', '16.5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (919, '1648881412476764161', '枢纽平面布置图坐标转换', NULL, '点', '112', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (920, '1648881412422238210', '新建断面布设:大坝上游坝面至二干01断面之间新增的4条断面选定及断面标志布设。', NULL, NULL, NULL, '2023-05-31', '自合同生效之日起，至2023年5月31日止。具体工期要求如下:(1）2022年5月30日前，完成项目启动和提交工作大纲。(2）2022年6月15日前，进场开展水库泥沙断面测量工作。(3）2023年1月31日前，完成水库泥沙断面现场测量工作。');
INSERT INTO `cmc_contract_work` VALUES (921, '1648881412422238210', '断面基点校测及维护:包括76条断面（含新建断面）基点坐标校测，损坏的断面基点或断面标志恢复，断面标志重新刷漆等。', NULL, NULL, NULL, NULL, '(4）2023年2月28日前，提交水库泥沙断面测量报告初稿（纸质15份全部采用彩色印刷，相应电子文档），并做好报告专家审查会议准备工作（预计2023年3月底前，具体时间另行通知）。');
INSERT INTO `cmc_contract_work` VALUES (922, '1648881412422238210', '新建断面布设:大坝上游坝面至二干01断面之间新增的4条断面选定及断面标志布设。', NULL, NULL, NULL, NULL, '(5）2023年4月30日前(具体时间根据专家审查会议确定)，根据专家审查意见补充完善水库泥沙断面测量报告，提交报告审定稿。(6）2023年5月31日前纸质和电子版资料均应按归档要求进行整理后归档。');
INSERT INTO `cmc_contract_work` VALUES (923, '1648881412363517954', '花溪区小黄河', NULL, 'km', '21.9', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (924, '1648881412363517954', '花溪区', NULL, 'km', '12.4', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (925, '1648881412363517954', '花溪区', NULL, 'km', '26.8', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (926, '1648881412346740737', '东石岭抽水蓄能电站左岸方案范围地形图1:5000，包括东石岭水库水下地形', '1:5000', 'km²', '15', NULL, '（1）合同签订日期第二日起算，15日历天内完成外业工作；（2）最终成果报告：合同签订后30日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (927, '1648881412346740737', '东石岭抽水蓄能电站左岸方案范围1:5000三维地形面', '1:5000', 'km²', '15', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (928, '1648881412346740737', '东石岭抽水蓄能电站右岸方案范围1:2000地形地类图', '1:2000', 'km²', '10', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (929, '1648881412346740737', '东石岭抽水蓄能电站右岸方案范围1:2000三维地形面', '1:2000', 'km²', '10', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (930, '1648881412346740737', '四等GNSS测量', '四等', '点', '12', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (931, '1648881412296409090', '沁水抽蓄下水库地形图（1：1000）', '1:1000', 'km²', '2.23', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (932, '1648881412296409090', '沁水抽蓄上水库地形图（1：1000）', '1:1000', 'km²', '1.69', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (933, '1648881412296409090', '沁水抽蓄工程区补测地形图（1：2000）', '1:2000', 'km²', '3.23', NULL, '自本合同签订后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (934, '1648881412271243265', '光伏场址区1：500地形图测绘', '1:500', 'km²', '13.8', NULL, '本项目测绘工作承包人应在确定为中标单位后的3日内进场， 提交最终测绘成果时间不得晚于测绘进场工作后15日内。其中进场后 10日内提交中间成果，15日内提交满足业主要求的最终成果。');
INSERT INTO `cmc_contract_work` VALUES (935, '1648881412220911618', '本项目位于雅安市芦山县，项目类型为地形图测绘，技术服务范围为大熊猫国家公园芦山片区保护设施恢复重建项目区域的地形图测绘。', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (936, '1648881412220911618', '长石坝-南天门防火道路恢复重建工程1:1000地形图测绘(带状)', '1:1000', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (937, '1648881412220911618', '大川镇-长石坝防火道路恢复重建工程1:1000地形图测绘', '1:1000', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (938, '1648881412220911618', '鹿厂河-九里岗防火道路恢复重建工程1:1000地形图测绘（带状）', '1:1000', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (939, '1648881412220911618', '鹿厂河-九里岗防火道路恢复重建工程1:1000数字正射影像图（DOM）制作', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (940, '1648881412220911618', '铜厂河瞭望塔及管护站1:500地形图测绘', '1:500', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (941, '1648881412220911618', '长石坝管理用房及哨卡和现状建筑测量站1:500地形图测绘', '1:500', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (942, '1648881412220911618', '草米岗瞭望塔1:500地形图测绘', '1:500', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (943, '1648881412220911618', '驼峰驿站瞭望塔1:500地形图测绘', '1:500', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (944, '1648881412220911618', '皂角湾瞭望塔1:500地形图测绘', '1:500', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (945, '1648881412220911618', '长石坝管理用房及游客中心房屋1:500立面图量测', '1:500', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (946, '1648881412220911618', '白石河1:500地形图测绘', '1:500', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (947, '1648881412204134402', '屏山抽水蓄能电站工程区1:5000地形图', '1:5000', 'km²', '6.694', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (948, '1648881412204134402', '屏山抽水蓄能电站工程区1:2000地形图', '1:2000', 'km²', '20.34', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (949, '1648881412204134402', '四等GNSS测量', '四等', '点', '10', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (950, '1648881412153802753', '1:1000地形图测量', '1:1000', 'km²', '30.23', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (951, '1648881412153802753', '1:1000正射影像制作', '1:1000', 'km²', '30.23', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (952, '1648881412153802753', '1:1000三维地形面制作', '1:1000', 'km²', '30.23', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (953, '1648881412124442625', '园区建设场地及临近范围内1:1000地形地类图测绘', '1:1000', 'km²', '2.88', NULL, '合同签订后20个工作日内完成并提交。');
INSERT INTO `cmc_contract_work` VALUES (954, '1648881412124442625', '料场区1:2000地形地类图测绘', '1:2000', 'km²', '2.32', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (955, '1648881412124442625', '建设场地及料场区四等GNSS测量', '四等', '点', '12', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (956, '1648881412124442625', '场地后缘双家沟1:2000地形地类图测绘', '1:2000', 'km²', '2.45', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (957, '1648881412124442625', '双家沟1:500地形地类图测绘', '1:500', 'km²', '0.90', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (958, '1648881412124442625', '双家沟五等GNSS测量', '五等', '点', '6', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (959, '1648881412107665410', '坝区二等控制网复测', '二等', '次', '4', NULL, '2020 年 9 月 28 日起至 2027 年 2 月 12 日止');
INSERT INTO `cmc_contract_work` VALUES (960, '1648881412107665410', '坝区上下游三等控制网复测', '三等', '次', '4', NULL, '2020 年 9 月 28 日起至 2027 年 2 月 12 日止');
INSERT INTO `cmc_contract_work` VALUES (961, '1648881412107665410', '二等水准测量', '二等', '次', '4', NULL, '2020 年 9 月 28 日起至 2027 年 2 月 12 日止');
INSERT INTO `cmc_contract_work` VALUES (962, '1648881412107665410', '枢纽区施工控制网随机复测', NULL, '次', '2', NULL, '2020 年 9 月 28 日起至 2027 年 2 月 12 日止');
INSERT INTO `cmc_contract_work` VALUES (963, '1648881412090888194', '坝体沉降及位移分析。', NULL, '项', '1', '2022-12-30', '2022年11月15日至 2022 年12月30日');
INSERT INTO `cmc_contract_work` VALUES (964, '1648881412090888194', '坝体、坝基的渗流分析。', NULL, '项', '1', '2022-12-30', '2022年11月15日至 2022 年12月30日');
INSERT INTO `cmc_contract_work` VALUES (965, '1648881412090888194', '坝基渗压分析。', NULL, '项', '1', '2022-12-30', '2022年11月15日至 2022 年12月30日');
INSERT INTO `cmc_contract_work` VALUES (966, '1648881412090888194', '面板应力、应变分析。', NULL, '项', '1', '2022-12-30', '2022年11月15日至 2022 年12月30日');
INSERT INTO `cmc_contract_work` VALUES (967, '1648881412090888194', '混凝土面板周边缝和垂直缝变形。', NULL, '项', '1', '2022-12-30', '2022年11月15日至 2022 年12月30日');
INSERT INTO `cmc_contract_work` VALUES (968, '1648881412074110977', '五等GNSS测量', '五等', '点', '8', '2022-11-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (969, '1648881412074110977', '矿区和生产加工区1:1000地形图', '1:1000', 'km²', '6.39', '2022-11-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (970, '1648881412057333761', '蓬安县林权类不动产登记数据整合工作（存量林权登记数据清理、补充图形、落宗、整合建库、入库和存量林权登记档案扫描、挂接、入库等工作，达到不动产登记入库标准，形成满足汇交要求的数据库，完成部、省、市林权登记数据整合建库的其他工作）', NULL, '项', '1', '2022-12-31', '2022 年11月15日前完成林权登记数据整合建库入库并汇交，2022年12月31日前完成全部工作任务并验收，若部、省、市有最新完成时间要求以最新要求为准。另本项目自验收合格次日起进入后续服务期，后续服务期限为1年。');
INSERT INTO `cmc_contract_work` VALUES (971, '1648881412040556545', '仪陇县林权数据整合建库采购项目（基础数据收集、档案数据数字化扫描、存量（已有登记数据）数据整合、补充调查、数据质量检查、数据库建设、成果汇交）', NULL, '项', NULL, '2000-01-01', NULL);
INSERT INTO `cmc_contract_work` VALUES (972, '1648881412002807809', '四等GNSS测量', '四等', '点', '8', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (973, '1648881412002807809', '坝址区1:1000地形图测绘', '1:1000', 'km²', '2.25', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (974, '1648881412002807809', '库区、引水线路、厂房系统1:2000地形图测绘', '1:2000', 'km²', '18.16', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (975, '1648881412002807809', '坝址区1:1000三维地形面制作', '1:1000', 'km²', '2.25', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (976, '1648881412002807809', '库区、引水线路、厂房系统1:2000三维地形面制作', '1:2000', 'km²', '18.16', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (977, '1648881412002807809', '1:1000地形图缩编为1:2000地形图', '1:2000', 'km²', '2.25', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (978, '1648881411986030594', '海南地形变化较大区域激光数据采集', '1:2000', 'km²', '475', '2022-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (979, '1648881411986030594', '数据漏洞区域激光数据采集', '1:2000', 'km²', '63', '2022-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (980, '1648881411944087553', '尼呷2#承包商经营地及施工场地1:500地形图测量', '1:500', 'km²', '0.35', NULL, '签订合同后20个日历天内提交全部成果。');
INSERT INTO `cmc_contract_work` VALUES (981, '1648881411927310338', '1:1000水下地形图测量', '1:1000', 'km²', '0.78', '2023-02-27', '签订合同后20个日历天内提交全部成果。');
INSERT INTO `cmc_contract_work` VALUES (982, '1648881411885367297', '金龙胡市片区现代农业示范园区核心区1:2000地形图测绘', '1:2000', 'km²', '9.06', NULL, '本合同总工期为15日历天，自合同签订之日起计算，是乙方按照合同约定提交技术服务成果并经甲方验收合格的期限，包含了中间成果完成期和最终成果完成期。');
INSERT INTO `cmc_contract_work` VALUES (983, '1648881411847618561', '料场一、料场二1:1000地形图测绘', '1:1000', 'km²', '0.60', NULL, '合同签订后10日内提交地形图测绘成果');
INSERT INTO `cmc_contract_work` VALUES (984, '1648881411847618561', '沉沙池及取水口1:500地形图测绘', '1:500', 'km²', '0.10', NULL, '合同签订后10日内提交地形图测绘成果');
INSERT INTO `cmc_contract_work` VALUES (985, '1648881411847618561', '左岸引水线路1:1000带状地形图测绘', '1:1000', 'km²', '1.37', NULL, '合同签订后10日内提交地形图测绘成果');
INSERT INTO `cmc_contract_work` VALUES (986, '1648881411826647041', '工程区1:2000地形图测绘', '1:2000', 'km²', '8.1', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (987, '1648881411826647041', '工程区1:2000三维地形面制作', '1:2000', 'km²', '8.1', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (988, '1648881411826647041', '五等GNSS控制测量（含高程测量）', '五等', '点', '6', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (989, '1648881411809869825', 'HT项目1:2000地形图测绘', '1:2000', 'km²', '3.67', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (990, '1648881411809869825', 'HT项目1:5000地形图测绘', '1:5000', 'km²', '67.56', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (991, '1648881411809869825', '五等GNSS测量', '五等', '点', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (992, '1648881411788898307', '本项目检测地点为两江新区水土园区;检测对象为甲方指定区域内的排水管网。', NULL, NULL, NULL, NULL, '工期要求: 70日历天，提交前乙方须完成内部检查验收工作。');
INSERT INTO `cmc_contract_work` VALUES (993, '1648881411788898307', '工作内容包括:指定排水管网的功能性检测、结构性检测，包括排水口调查、检查井检查、雨水口检查等;配合完成空间属性普查、混接点调查等;配合整理成果资料，完成重庆市住房和城乡建设委员会的数据入库工作。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (994, '1648881411788898306', '本项目工作范围为南岸区南坪片区;普查对象为南岸区南坪片区管径D≥300mm的市政排水管网，具体范围以甲方提供的范围图为准。', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (995, '1648881411788898306', '工作内容包括:对范围内的市政排水管道开展结构性、功能性排查,对市政排水检查井、雨水口进行检查，对排水口进行调查。按照要求制作整理项目资料，通过业主单位组织的验收,满足重庆市住房和城乡建设委员会的排水管道检测入库要求，完成入库工作。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (996, '1648881411772121090', '道孚抽水蓄能电站上水库地形地类图1:1000', '1:1000', 'km²', '2.04', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (997, '1648881411772121090', '道孚抽水蓄能电站下水库地形地类图1:1000', '1:1000', 'km²', '1.11', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (998, '1648881411772121090', '道孚抽水蓄能电站下水库备用料场地形地类图1:1000', '1:1000', 'km²', '0.45', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (999, '1648881411772121090', '道孚抽水蓄能电站上水库渣场地形图1:1000', '1:1000', 'km²', '0.89', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1000, '1648881411772121090', '道孚抽水蓄能电站下水库桑其柯右岸冲沟地形图1:1000', '1:1000', 'km²', '0.96', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1001, '1648881411772121090', '道孚抽水蓄能电站下水库1#渣场地形图1:1000', '1:1000', 'km²', '1.91', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1002, '1648881411772121090', '道孚抽水蓄能电站桑其柯与盘龙沟汇口1:2000地类图', '1:2000', 'km²', '0.32', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1003, '1648881411772121090', '道孚抽水蓄能电站上水库施工工厂设施1:2000地类图', '1:2000', 'km²', '0.49', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1004, '1648881411772121090', '道孚抽水蓄能电站沿盘龙沟汇口以上1.8km至3km施工临建范围地形图1:2000', '1:2000', 'km²', '0.44', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1005, '1648881411772121090', '四等GNSS测量', '四等', '点', '12', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1006, '1648881411772121090', '五等GNSS测量', '五等', '点', '3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1007, '1648881411772121090', '四等高程测量', '四等', 'km', '65', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1008, '1648881411751149569', '施工场地1:1000地形图', '1:1000', 'km²', '5.06', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1009, '1648881411751149569', '复核坝区1:1000水下地形图', '1:1000', 'km²', '0.58', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1010, '1648881411751149569', '四等GNSS测量', '四等', '点', '9', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1011, '1648881411751149569', '四等三角高程测量', '四等', 'km', '35', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1012, '1648881411650486273', '羊湖电站压力钢管永久变形监测控制水准工作基点IBM02、IBM03出现沉降。2020年羊湖站安全性评价主要问题及整改建议依据《水电站水工设施运行导则》第3部分：大坝安全监测系统附表A.·1的要求监测控制网校核运行期每年一次。变形监测网校核频次调整为每年一次，对出现沉降的水准工作基点进行改造。', NULL, '项', '1', '2022-10-05', '本项目的质量保修期为从项目通过竣工验收之日起开始起算至1年期满止。工作内容详见附件4：工程量清单');
INSERT INTO `cmc_contract_work` VALUES (1013, '1648881411587571714', '1:1000地形地类图测绘', '1:1000', 'km²', '3.06', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1014, '1648881411587571714', '1:2000地形地类图测绘', '1:2000', 'km²', '12.82', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1015, '1648881411587571714', '五等GNSS测量（预估）', '五等', '点', '6', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1016, '1648881411562405890', '1:2000地形地类图', '1:2000', 'km²', '19.2', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1017, '1648881411562405890', '1:2000正射影像制作', '1:2000', 'km²', '19.2', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1018, '1648881411562405890', '1:2000三维地形面制作', '1:2000', 'km²', '19.2', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1019, '1648881411562405890', '五等GNSS测量（预估）', '五等', '点', '6', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1020, '1648881411499491386', '1:500地形图测绘', '1:500', 'km²', '21.00', NULL, '林芝市巴宜区62个行政村1：500地形图测绘，制作控制点，并完成内业成图等技术服务工作。');
INSERT INTO `cmc_contract_work` VALUES (1021, '1648881411499491385', '1:500大断面测量', '1:500', 'km', '3.2', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1022, '1648881411499491385', '1:1000水下地形测量', '1:1000', 'km²', '0.31', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1023, '1648881411499491385', '1:1000大断面测量', '1:1000', 'km', '16', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1024, '1648881411499491385', '断面基点测量', NULL, '点', '82', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1025, '1648881411499491385', '1:1000水边线测量', '1:1000', 'km', '203.95', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1026, '1648881411499491385', '流量测验', NULL, '个', '11', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1027, '1648881411499491382', '1:2000地形图测绘（预估工作量）', '1:2000', 'km²', '45', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1028, '1648881411499491382', '1:2000数字正射影像制作', '1:2000', 'km²', '68', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1029, '1648881411499491382', '1:2000三维地形面制作', '1:2000', 'km²', '68', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1030, '1648881411499491382', '四等GNSS点测量（预估工作量）', '四等', '点', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1031, '1648881411499491382', '四等三角高程测量', '四等', 'km', '38', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1032, '1648881411499491382', '三等高程引测（预估工作量）', '三等', 'km', '106', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1033, '1648881411499491381', '完成四川绵竹抽水蓄能电站界桩测设工作。主要包括界桩布置设计、现场放线与测量、界桩制作、运输、开挖、埋设、建设征地红线范围图绘制等。', NULL, '项', '1', NULL, '（1）合同签订之日起15天之内，配合完成界桩布置设计工作；（2）合同签订之日起33天之内，完成界桩制作工作；（3）合同签订之日起90天之内，完成现场界桩埋设、界桩放线与测量、征地红线范围图绘制等工作。');
INSERT INTO `cmc_contract_work` VALUES (1034, '1648881411499491379', '上库、下库1:2000地形图测绘', '1:2000', 'km²', '9.4', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1035, '1648881411499491379', '工程区1:5000地形图测绘', '1:5000', 'km²', '51', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1036, '1648881411499491379', '五等GNSS测量（预估）', '五等', '点', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1037, '1648881411499491379', '四等高程测量', '四等', 'km', '20', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1038, '1648881411499491379', '上库、下库1:2000三维地形面', '1:2000', 'km²', '9.4', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1039, '1648881411499491379', '工程区1:5000三维地形面', '1:5000', 'km²', '51', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1040, '1648881411499491376', '1:500地形图缩编成1:2000地形图', '1:2000', 'km²', '9', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1041, '1648881411499491376', '排涝区域1:2000地形图测绘', '1:2000', 'km²', '20.24', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1042, '1648881411499491376', '1:1000地形图缩编成1:2000地形图', '1:2000', 'km²', '3', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1043, '1648881411499491376', '1:2000地形图拼接', '1:2000', 'km²', '8', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1044, '1648881411499491375', '排涝区域激光数据采集（1:2000）', '1:2000', 'km²', '65.29', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1045, '1648881411499491375', '像片连测(1:2000)', '1:2000', 'km²', '65.29', NULL, '合同签订日期第二日起算，15日历天内完成外业工作');
INSERT INTO `cmc_contract_work` VALUES (1046, '1648881411499491375', '像片调绘(1:5000)', '1:5000', 'km²', '65.29', NULL, '合同签订后30日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (1047, '1648881411499491375', 'E级GNSS测量', 'E级', '点', '8', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1048, '1648881411499491375', '四等三角高程测量', '四等', 'km', '32', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1049, '1648881411499491375', '排涝区域1:5000地形图(DLG)', '1:5000', 'km²', '65.29', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1050, '1648881411499491375', '1:1000地形图缩编成1:5000地形图并与新测1:5000地形图拼接', '1:5000', 'km²', '9', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1051, '1648881411499491373', '坝脚到尾水出口下游彩虹桥下游542米河道 1:500地形图测绘（岸上）', '1:500', 'km²', '0.27', NULL, '签订合同后15个日历天内提交全部成果');
INSERT INTO `cmc_contract_work` VALUES (1052, '1648881411499491373', '坝脚到尾水出口下游彩虹桥下游542米河道 1:500地形图测绘（水下）', '1:500', 'km²', '0.22', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1053, '1648881411499491373', '流量测验', NULL, '个', '5.00', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1054, '1648881411499491373', '1:500水边线测量', '1:500', 'km', '4.00', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1055, '1648881411499491373', '尾水出口下游彩虹桥下游542米河道 1:500横断面测量', '1:500', 'km', '0.18', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1056, '1648881411499491372', '汤坝居民点取水枢纽1:500地形地类图测绘', '1:500', 'km²', '0.1', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1057, '1648881411499491372', '取水口至临时板房段1:1000地形地类图测绘', '1:1000', NULL, '0.14', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1058, '1648881411499491372', '临时板房至跨沟桥（沟边净水厂）段1:1000地形地类图测绘', '1:1000', NULL, '0.21', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1059, '1648881411499491372', '跨沟桥至居民点段1:1000地形地类图测绘', '1:1000', NULL, '0.14', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1060, '1648881411499491372', '汤坝寨子场地1:500地形地类图测绘', '1:500', NULL, '0.17', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1061, '1648881411499491372', '汤坝料场1:1000地形图测绘', '1:1000', NULL, '0.976', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1062, '1648881411499491372', '四等GNSS控制测量', '四等', '点', '4', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1063, '1648881411499491372', '四等三角高程测量', '四等', 'km', '8', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1064, '1648881411499491369', '岸上1:2000地形图测绘', '1:2000', 'km²', '0.547', NULL, '合同签订后及时开展外业工作完成并提交最终成果报告。需满足老沟水库蓄水验收要求的时限。');
INSERT INTO `cmc_contract_work` VALUES (1065, '1648881411499491369', '水下1:2000地形图测绘', '1:2000', 'km²', '0.545', NULL, '合同签订后及时开展外业工作完成并提交最终成果报告。需满足老沟水库蓄水验收要求的时限。');
INSERT INTO `cmc_contract_work` VALUES (1066, '1648881411499491364', '理塘抽水蓄能电站工程区1:5000地形图', '1:5000', 'km²', '26.6', NULL, '补充协议签订后15日历天内完工');
INSERT INTO `cmc_contract_work` VALUES (1067, '1648881411499491364', '五等GNSS测量', '五等', '点', '6', NULL, '补充协议签订后15日历天内完工');
INSERT INTO `cmc_contract_work` VALUES (1068, '1648881411499491364', '四等三角高程测量', '四等', 'km', '15', NULL, '补充协议签订后15日历天内完工');
INSERT INTO `cmc_contract_work` VALUES (1069, '1648881411499491363', '工程区1:2000地形图', '1:2000', 'km²', '5', NULL, '合同签订日期第二日起算，15日历天内完成外业工作；');
INSERT INTO `cmc_contract_work` VALUES (1070, '1648881411499491363', '工程区1:5000地形图', '1:5000', 'km²', '42', NULL, '最终成果报告：合同签订后30日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (1071, '1648881411499491363', '五等GNSS测量（预估）', '五等', '点', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1072, '1648881411499491363', '四等三角高程测量', '四等', 'km', '15', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1073, '1648881411499491361', '克日沟渣场1:1000地形图测绘', '1:1000', 'km²', '6.63', NULL, '补充协议签订后15日历天内完工');
INSERT INTO `cmc_contract_work` VALUES (1074, '1648881411499491359', '水库1：50000地形图（按照范围线进行收集）', '1:50000', '幅', '18', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1075, '1648881411499491359', '水库1：2000地形图（3400m高程以下）', '1:2000', 'km²', '161', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1076, '1648881411499491359', '库区主要变形体及滑坡1：2000地形图', '1:2000', 'km²', '7.4', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1077, '1648881411499491359', '八一桥和色通之间范围金沙江侧1:2000地形图', '1:2000', 'km²', '2.3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1078, '1648881411499491359', '八一桥和色通之间范围色曲侧1:5000地形图', '1:5000', 'km²', '2.1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1079, '1648881411499491359', '申弄人工骨料场补测1：2000地形图', '1:2000', 'km²', '1.2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1080, '1648881411499491359', '业主营地、色曲河下游侧、临沟口、金沙江与色曲河汇合口、下游右岸1:2000地形图', '1:2000', 'km²', '0.6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1081, '1648881411499491359', '1:2000水文横断面测量', '1:2000', 'km', '11', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1082, '1648881411499491359', '1:2000水边线测量', '1:2000', 'km', '80', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1083, '1648881411499491359', '1:2000水文横断面基点测量', NULL, '点', '44', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1084, '1648881411499491359', '二等GNSS测量（预估）', '二等', '点', '16.00', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1085, '1648881411499491359', '三等GNSS测量（预估）', '三等', '点', '38.00', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1086, '1648881411499491359', '三等高程测量（预估）', '三等', 'km', '270.00', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1087, '1648881411499491359', '四等三角高程测量（预估）', '四等', 'km', '42.00', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1088, '1648881411499491359', '五等GNSS测量（预估）', '五等', '点', '72.00', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1089, '1648881411499491359', '1:5000DOM制作', '1:5000', 'km²', '2.1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1090, '1648881411499491359', '1:5000三维地形面制作', '1:5000', 'km²', '2.1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1091, '1648881411499491359', '1:2000DOM制作', '1:2000', 'km²', '10.9', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1092, '1648881411499491359', '1:2000三维地形面制作', '1:2000', 'km²', '171.9', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1093, '1648881411499491355', '雅江抽水蓄能电站上水库枢纽区及下水库1:2000地形图', '1:2000', 'km²', '4', NULL, '合同生效后30日内提交最终资料');
INSERT INTO `cmc_contract_work` VALUES (1094, '1648881411499491355', '雅江抽水蓄能电站工程区及料场1:5000地形图', '1:5000', 'km²', '24.7', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1095, '1648881411499491355', '四等GNSS测量（预估）', '四等', '点', '6', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1096, '1648881411499491355', '四等三角高程测量（预估）', '四等', 'km', '15', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1097, '1648881411499491351', '双江口混合式抽水蓄能电站厂房部位及下库进/出水口1:1000地形图测绘', '1:1000', 'km²', '2.3', NULL, '签订合同后20个日历天内提交全部成果。');
INSERT INTO `cmc_contract_work` VALUES (1098, '1648881411499491351', '双江口混合式抽水蓄能电站厂房部位及下库进/出水口1:1000地形图测绘（水下地形）', '1:1000', 'km²', '0.2', NULL, '签订合同后20个日历天内提交全部成果。');
INSERT INTO `cmc_contract_work` VALUES (1099, '1648881411499491351', '双江口混合式抽水蓄能电站厂房部位及下库进/出水口正射影像图', '1:1000', 'km²', '2.5', NULL, '签订合同后20个日历天内提交全部成果。');
INSERT INTO `cmc_contract_work` VALUES (1100, '1648881411499491350', '上水库枢纽区及下水库1:2000地形图', '1:2000', 'km²', '4', NULL, '补充协议签订后20日历天内完工');
INSERT INTO `cmc_contract_work` VALUES (1101, '1648881411499491350', '雅江抽水蓄能电站工程区及料场1:5000地形图', '1:5000', 'km²', '18.66', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1102, '1648881411499491350', '四等GNSS测量', '四等', '点', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1103, '1648881411499491350', '四等三角高程测量', '四等', 'km', '12', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1104, '1648881411499491350', '雅江抽水蓄能电站工程区及料场1:10000地形图', '1:10000', '幅', '3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1105, '1648881411499491349', '四等GNSS测量', '四等', '点', '8', NULL, '合同签订后30日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (1106, '1648881411499491349', '四等三角高程测量', '四等', 'km', '36', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1107, '1648881411499491349', '施工总布置及比选库址1:2000地形地类图测绘', '1:2000', 'km²', '23.8', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1108, '1648881411499491349', '施工总布置及比选库址1:2000地形图测绘（水下）', '1:2000', 'km²', '1.2', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1109, '1648881411499491349', '枢纽区1:1000地形图测绘', '1:1000', 'km²', '12', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1110, '1648881411499491349', '枢纽区1:1000地形图测绘（水下）', '1:1000', 'km²', '2', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1111, '1648881411499491349', '1:1000缩放为1:2000地形图测绘', '1:2000', 'km²', '14', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1112, '1648881411499491349', '1:2000地类图测绘', '1:2000', 'km²', '14', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1113, '1648881411499491348', '光伏场区 1:1000 地形图测绘，包括升压站', '1:1000', 'km²', '34', NULL, '具体以实际工作量为主');
INSERT INTO `cmc_contract_work` VALUES (1114, '1648881411499491347', '宜宾市叙州区抽水蓄能电站1:2000地形图测绘', '1:2000', 'km²', '10.8', NULL, '自合同签订次日起20日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (1115, '1648881411499491347', '五等GNSS测量（预估）', '五等', '点', '6', NULL, '自合同签订次日起20日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (1116, '1648881411499491345', '四川广安岳池抽水蓄能电站项目预可研阶段1:2000地形图测绘', '1:2000', 'km²', '6.414', NULL, '合同签订后，甲方发出开工通知即合同生效，20个日历天内提交全部成果。');
INSERT INTO `cmc_contract_work` VALUES (1117, '1648881411499491345', '四川广安岳池抽水蓄能电站项目预可研阶段1:2000地形图测绘（水下地形）', '1:2000', 'km²', '0.216', NULL, '合同签订后，甲方发出开工通知即合同生效，20个日历天内提交全部成果。');
INSERT INTO `cmc_contract_work` VALUES (1118, '1648881411499491345', '五等GNSS测量（预估）', '五等', '点', '5', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1119, '1648881411499491344', '南充蓬安抽水蓄能电站预可研阶段1:2000地形图测绘', '1:2000', 'km²', '8.53', NULL, '合同签订后，甲方发出开工通知即合同生效，20个日历天内提交全部成果。');
INSERT INTO `cmc_contract_work` VALUES (1120, '1648881411499491344', '南充蓬安抽水蓄能电站预可研阶段1:2000地形图测绘（水下地形）', '1:2000', 'km²', '0.79', NULL, '合同签订后，甲方发出开工通知即合同生效，20个日历天内提交全部成果。');
INSERT INTO `cmc_contract_work` VALUES (1121, '1648881411499491344', '五等GNSS测量（预估）', '五等', '点', '6', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1122, '1648881411499491341', '1:1000地形图', '1:1000', 'km²', '13.1', NULL, '合同签订后30日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (1123, '1648881411499491341', '1:5000地形图', '1:5000', 'km²', '0.11', NULL, '合同签订后30日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (1124, '1648881411499491341', '四等GNSS测量', '四等', '点', '9', NULL, '合同签订后30日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (1125, '1648881411499491341', '四等三角高程测量', '四等', 'km', '60', NULL, '合同签订后30日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (1126, '1648881411499491337', 'ABH项目1:10000地形图', '1:10000', '幅', '47', NULL, '签订合同后7个日历天内提交全部成果。');
INSERT INTO `cmc_contract_work` VALUES (1127, '1648881411499491336', '工程区1:5000地形图', '1:5000', 'km²', '62.00', NULL, '补充协议签订后20日历天内完工');
INSERT INTO `cmc_contract_work` VALUES (1128, '1648881411499491330', '6座桥墩台特征形态测量', NULL, '点', '120', NULL, '合同生效后15天内完成全部工作。');
INSERT INTO `cmc_contract_work` VALUES (1129, '1648881411499491330', '6座桥轴线1：500断面', '1:500', 'km', '2.3', NULL, '合同生效后15天内完成全部工作。');
INSERT INTO `cmc_contract_work` VALUES (1130, '1648881411457548290', '江油抽水蓄能电站工程区1:1000地形图', '1:1000', 'km²', '11.9', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1131, '1648881411457548290', '四等GNSS测量', '四等', 'km', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1132, '1648881411457548290', '四等高程测量', '四等', '点', '20', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1133, '1648881411457548290', '江油抽水蓄能电站工程区1:1000三维地形面', '1:1000', 'km²', '11.9', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1134, '1648881411373662209', '桐子林水电站水库泥沙断面测量', NULL, '项', '1', NULL, '第一年度：2021年11月1日开工，2022年3月31日项目验收。');
INSERT INTO `cmc_contract_work` VALUES (1135, '1648881411373662209', '桐子林水电站水库泥沙断面测量', NULL, '项', '1', NULL, '第二年度：2022年11月1日开工，2023年3月31日项目验收。');
INSERT INTO `cmc_contract_work` VALUES (1136, '1648881411331719170', '雅砻江二滩水电站2023年度大坝外部变形和近坝区滑坡稳定性监测', NULL, '项', '1', '2023-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1137, '1648881411331719170', '雅砻江二滩水电站2024年度大坝外部变形和近坝区滑坡稳定性监测', NULL, '项', '1', '2024-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1138, '1648881411331719170', '雅砻江二滩水电站2025年度大坝外部变形和近坝区滑坡稳定性监测', NULL, '项', '1', '2025-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1139, '1648881411331719170', '雅砻江二滩水电站2026年度大坝外部变形和近坝区滑坡稳定性监测', NULL, '项', '1', '2026-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1140, '1648881411252027394', '1:2000地形地类图', '1:2000', 'km²', '8', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1141, '1648881411252027394', '1:5000地形地类图', '1:5000', 'km²', '5.1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1142, '1648881411252027394', '五等GNSS测量（预估）', '五等', '点', '9', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1143, '1648881411252027394', '四等高程测量', '四等', 'km', '9', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1144, '1648881411235250178', 'ML水库电站建设征地扣除水域的土地面积约为28万亩，耕园地约7万亩，林草地约20万亩，需对上述土地开展测量工作。', NULL, '项', '1', NULL, '本合同服务期限自本合同签订之日起，至完成ML水库电站建设征地实物指标土地调查测量工作并通过验收及移交（暂定120天）。');
INSERT INTO `cmc_contract_work` VALUES (1145, '1648881411235250178', '行政界线、权属界线实地测量，制作调查范围内的行政范围图；', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1146, '1648881411235250178', '耕地、园地、草地、林地等实地指认边界、确认土地利用类型，将各地块分解到户；', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1147, '1648881411235250178', '其它地类图斑（未利用地、交通运输用地、设施农用地、内陆滩涂等）确定土地权属及用地性质，按相关要求登记；', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1148, '1648881411235250178', '零星树木调查登记；土地附属设施（铁丝网、蔬菜大棚、牲畜棚、围墙、水池等）调查登记；', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1149, '1648881411235250178', '录入电子表格数据及成果数据汇总等；调查的各类图斑与三调、永久基本农田、林地一张图等数据叠加分析，按要求进行成果资料的整理；', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1150, '1648881411235250178', '汇总及报表分析，成果数据入库。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1151, '1648881411235250178', '甲方要求的与土地调查相关的其他工作。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1152, '1648881411218472961', '补水枢纽1:1000地形图测绘', '1:1000', 'km²', '0.32', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1153, '1648881411218472961', '沁水抽蓄灰岩料场1：1000地形测绘', '1:1000', 'km²', '1.37', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1154, '1648881411218472961', '五等GNSS测量（预估）', '五等', '点', '5', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1155, '1648881411201695745', '五等GNSS测量（预估）', '五等', '点', '9', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1156, '1648881411201695745', '四等高程测量', '四等', 'km', '8', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1157, '1648881411201695745', '工程区1:2000地形图测绘（岸上）', '1:2000', 'km²', '19.1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1158, '1648881411201695745', '工程区1:2000地形图测绘（水下）', '1:2000', 'km²', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1159, '1648881411201695745', '1：2000三维地形面', '1:2000', 'km²', '20.1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1160, '1648881411159752705', '五等GNSS测量（包含高程测量）', '五等', '点', '10', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1161, '1648881411159752705', '尼呷4#承包商经营地及施工场地1:500地形图', '1:500', 'km²', '0.3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1162, '1648881411159752705', '八窝龙5#供水站取水工程场地1:500地形图', '1:500', 'km²', '0.4', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1163, '1648881411138781190', '工程区1:5000地形图测绘', '1:5000', 'km²', '68', NULL, '合同生效后30日内提交最终资料');
INSERT INTO `cmc_contract_work` VALUES (1164, '1648881411138781188', '扎西绕登沟鱼道出口河道1:1000水下地形图测绘', '1:1000', 'km²', '0.12', NULL, '合同生效后20日内提交最终资料');
INSERT INTO `cmc_contract_work` VALUES (1165, '1648881411138781188', '玉松普曲鱼道出口河道1:1000水下地形图测绘', '1:1000', 'km²', '0.06', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1166, '1648881411138781188', 'ML水电站坝下河道1：1000水下地形图测绘', '1:1000', 'km²', '5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1167, '1648881411138781188', 'ML水电站坝下河道1：1000地形图测绘', '1:1000', 'km²', '2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1168, '1648881411138781188', '1:1000三维地形面', '1:1000', 'km²', '7.18', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1169, '1648881411138781186', '德登抽水蓄能电站上水库及下水库范围地形地类图1:2000，包括范围内独曲水下地形', '1:2000', 'km²', '11', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1170, '1648881411138781186', '德登抽水蓄能电站工程区范围地形图1:5000，包括范围内独曲水下地形', '1:5000', 'km²', '32', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1171, '1648881411138781186', '五等GNSS测量（预估）', '五等', '点', '6', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1172, '1648881411138781186', '四等高程测量', '四等', 'km', '20', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1173, '1648881411138781186', '下水库独曲大断面测量1:500', '1:500', 'km', '3.2', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1174, '1648881411138781186', '测绘范围内独曲水边线测量(预估)', NULL, 'km', '2', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1175, '1648881411122003970', '着巴抽水蓄能电站上水库及下水库范围地形地类图1:2000，包括范围内独曲水下地形', '1:2000', 'km²', '6', NULL, '含1:2000三维地形面制作');
INSERT INTO `cmc_contract_work` VALUES (1176, '1648881411122003970', '着巴抽水蓄能电站工程区范围地形图1:5000，包括范围内独曲水下地形', '1:5000', 'km²', '24', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1177, '1648881411122003970', '五等GNSS测量（预估）', '五等', '点', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1178, '1648881411122003970', '四等高程测量', '四等', 'km', '20', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1179, '1648881411122003970', '下水库大断面测量1:500', '1:500', 'km', '1.1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1180, '1648881411122003970', '测绘范围内独曲水边线测量（预估）', NULL, 'km', '2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1181, '1648881411105226753', '1:2000地形图', '1:2000', 'km²', '17.03', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1182, '1648881411105226753', '五等GNSS测量', '五等', '点', '6', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1183, '1648881411105226753', '四等三角高程测量', '四等', 'km', '15', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1184, '1648881411105226753', '1:2000河道纵断面测量', '1:2000', 'km²', '2.27', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1185, '1648881411067478017', '（1）控制点设立及控制测量：', NULL, NULL, NULL, NULL, '计划进场开工时间：合同签订后一周内，第一次成果提交完成时间为：进场后 60 日');
INSERT INTO `cmc_contract_work` VALUES (1186, '1648881411067478017', '二等GNSS点', '二等', '点', '5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1187, '1648881411067478017', '三等GNSS点', '三等', '点', '117', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1188, '1648881411067478017', '三等三角高程', '三等', 'km', '554', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1189, '1648881411067478017', '（2）测量配套设施设立：雅砻江干条支流共计198条泥沙监测断面的基点桩、标志柱、标志牌设立', NULL, NULL, '198', NULL, '第二次大断面测量提交时间为 2025年 04 月 15 日。');
INSERT INTO `cmc_contract_work` VALUES (1190, '1648881411067478017', '（3）库区断面测量：198条大断面测量、断面基点测量及毁坏断面基点修复；', NULL, NULL, '198', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1191, '1648881411067478017', '（4）测站高程引测：出库水文站和4个库区水位站四等水准测量;', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1192, '1648881411067478017', '测量总结报告：测量总结报告编制（2次）', NULL, '次', '2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1193, '1648881411050700802', '金川水电站坝区1:2000地形图', '1:2000', 'km²', '0.76', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1194, '1648881411050700802', '瀑布沟水电站坝区1:2000地形图', '1:2000', 'km²', '1.94', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1195, '1648881411050700802', '金川水电站区域地质图数字化', NULL, 'km²', '6510', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1196, '1648881411050700802', '金川水电站坝址区工程地质平面图数字化', NULL, 'km²', '1.46', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1197, '1648881411050700802', '金川水电站坝址区工程地质剖面图数字化', NULL, 'km²', '3', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1198, '1648881411000369153', '1:1000水下地形图测绘', '1:1000', 'km²', '1.88', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1199, '1648881411000369153', '四等GNSS测量', '四等', '点', '3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1200, '1648881410997496056', '核实国家公园自然资源登记单元界线', NULL, '项', '1', '2020-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1201, '1648881410997496056', '核实国家公园自然资源类型', NULL, '项', '1', '2020-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1202, '1648881410997496056', '核实国家公园权属状况', NULL, '项', '1', '2020-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1203, '1648881410997134774', '乳源县鹰峰路两侧楼宇及道路照明项目--测绘', NULL, '项', '1', NULL, '鹰峰东路二九一路路口段至鹰峰西路及南水路段。主要内容包括安装建筑楼宇亮化灯具、更换路灯、广场亮化等，涉及人社局、水务局、林业局、建设银行、人民医院、中国邮政及私有建筑等共93栋。本工程工期为15个工作日，具体进场时间以甲方通知为准，并按要求的时间交付全部测量成果资料。');
INSERT INTO `cmc_contract_work` VALUES (1204, '1648881410990960316', '乳源县天然气管道及配套设施建设项目地下管线普查项目。乙方应依据测绘技术规范及甲方指定范围及要求，对甲方指定区域进行天然气管道及配套设施普查，普查成果应提交甲方检查验收。', NULL, '项', '1', '2022-11-16', NULL);
INSERT INTO `cmc_contract_work` VALUES (1205, '1648881410989418161', '中桩中平及横断面测量', NULL, 'km', '3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1206, '1648881410989418161', '1：500地形测绘', '1:500', 'km²', '0.45', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1207, '1648881410988637056', '对佛山市季华路西延线工程（南海段）项目丹灶镇范围内的测量工程进行地籍及房产测绘。', NULL, '项', '1', NULL, '委托服务期间自 2020年 9 月至本项目完成止。');
INSERT INTO `cmc_contract_work` VALUES (1208, '1648881410985319268', '成雅工业园区百丈安置房二期1:500地形图测绘', '1:500', 'km²', '0.8', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1209, '1648881410985319268', '1:500房屋面积测绘', '1:500', 'km²', '0.05', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1210, '1648881410985319268', '五等GNSS控制点测量', '五等', '点', '10', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1211, '1648881410985319268', '四等高程测量', '四等', 'km', '3.8', NULL, '6个点');
INSERT INTO `cmc_contract_work` VALUES (1212, '1648881410984908632', '雅砻江两河口水电站阿宗1:500地形地类图测绘', '1:500', 'km²', '0.35', '2020-05-16', NULL);
INSERT INTO `cmc_contract_work` VALUES (1213, '1648881410984908632', '雅砻江两河口水电站红顶集镇引水线路1:2000地形地类图测绘', '1:2000', 'km²', '1.08', '2020-05-16', NULL);
INSERT INTO `cmc_contract_work` VALUES (1214, '1648881410984908632', '雅砻江两河口水电站红顶集镇取水口1:500地形地类图测绘', '1:500', 'km²', '0.11', '2020-05-16', NULL);
INSERT INTO `cmc_contract_work` VALUES (1215, '1648881410984908632', '雅砻江两河口水电站库区道路1：500地形图补测（一）', '1:500', 'km²', '0.86', '2020-05-16', NULL);
INSERT INTO `cmc_contract_work` VALUES (1216, '1648881410984908632', '雅砻江两河口水电站库区道路1：500地形图补测（二）', '1:500', 'km²', '0.30', '2020-05-16', NULL);
INSERT INTO `cmc_contract_work` VALUES (1217, '1648881410984908632', '雅砻江两河口水电站库区道路1：2000地形图补测（一）', '1:2000', 'km²', '0.34', '2020-05-16', NULL);
INSERT INTO `cmc_contract_work` VALUES (1218, '1648881410984908632', '雅砻江两河口水电站库区道路1：2000地形图补测（二）', '1:2000', 'km²', '1.26', '2020-05-16', NULL);
INSERT INTO `cmc_contract_work` VALUES (1219, '1648881410984908632', '雅砻江两河口水电站库区道路路网1：2000平面图', '1:2000', 'km²', '0.40', '2020-05-16', NULL);
INSERT INTO `cmc_contract_work` VALUES (1220, '1648881410983497326', '测绘作业单位的具体工作包括：核实和调查不动产权属和界址状', NULL, NULL, NULL, '2020-08-14', '根据各(社区、村)实际情况，该项目农村集体建设用地、宅基地使用权及房屋所有权确权登记工作分80 天实施。');
INSERT INTO `cmc_contract_work` VALUES (1221, '1648881410980290951', '坝前泥沙淤积监测', NULL, '项', '1', NULL, '具体开工、完工时间以发包人通知为准。');
INSERT INTO `cmc_contract_work` VALUES (1222, '1648881410980290951', '坝下游冲刷监测', NULL, '项', '1', NULL, '具体开工、完工时间以发包人通知为准。');
INSERT INTO `cmc_contract_work` VALUES (1223, '1648881410979397634', '固定建筑立面测绘', NULL, 'm²', '120000.00', NULL, '在本合同签订之日起10个日历日内完成测绘工作。');
INSERT INTO `cmc_contract_work` VALUES (1224, '1648881410979397634', '地形图测绘', NULL, 'm²', '60000.00', NULL, '在本合同签订之日起10个日历日内完成测绘工作。');
INSERT INTO `cmc_contract_work` VALUES (1225, '1648881410975262974', '测区范围位于东经106°15′～106°28′、北纬27°41′～27°53′之间，完成航空摄影范围线内约77 平方千米空三加密，快拼影像图，正式影像图，内业采集，外业修补测，数据编辑工作。', '1:500', '项', '1', NULL, '乙方所有成果资料提交，甲方支付完项目款时协议终止。');
INSERT INTO `cmc_contract_work` VALUES (1226, '1648881410974125570', '白石河瞭望塔点位1:500地形图测绘', '1:500', 'km²', '0.20', NULL, '合同签订后15个工作日内完成，下同。');
INSERT INTO `cmc_contract_work` VALUES (1227, '1648881410974125570', '鹿厂河瞭望塔点位1:500地形图测绘', '1:500', 'km²', '0.20', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1228, '1648881410974125570', '芦山片区北入口1:500地形图测绘', '1:500', 'km²', '0.10', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1229, '1648881410974125570', '停车场1:500地形图测绘', '1:500', 'km²', '0.05', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1230, '1648881410974125570', '共建共享中心区域1:500地形图', '1:500', 'km²', '0.15', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1231, '1648881410974125570', '铜厂河消防水池点位1:500地形图', '1:500', 'km²', '0.10', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1232, '1648881410974125570', 'E级GNSS测量', 'E级', '点', '24', NULL, '每个地方预估4点，共计24点');
INSERT INTO `cmc_contract_work` VALUES (1233, '1648881410974125570', '五等三角高程测量', '五等', '点', '24', NULL, '每个地方预估4点，共计24点');
INSERT INTO `cmc_contract_work` VALUES (1234, '1648881410972336941', '雅安市名山区水利局河流河道管理范围划界项目区管四条渠道划界工作。', NULL, '项', '1', '2020-12-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1235, '1648881410971979181', '结合存量林权不动产登记数据，按照目标要求完成数据清理、录入；', NULL, '项', '1', '2021-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1236, '1648881410971979181', '整理、扫描已有存量林权不动产登记纸质档案；', NULL, '项', '1', '2021-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1237, '1648881410971979181', '通过现有登记信息，结合林草部门第二次林地调查成果、自然资源部门第三次国土调查成果、其他已登记不动产数据成果，对存量林权不动产登记数据内业分析逐一落宗、坐标转换、属性数据补录；', NULL, '项', '1', '2021-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1238, '1648881410971979181', '数据整合建库；', NULL, '项', '1', '2021-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1239, '1648881410971979181', '档案挂接；', NULL, '项', '1', '2021-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1240, '1648881410971979181', '质检满足省、部级汇交要求入库。', NULL, '项', '1', '2021-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1241, '1648881410970475344', '1:500倾斜摄影（无人机影像数据采集）', '1:500', 'km²', '4.0', '2021-07-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (1242, '1648881410970475344', '1:500倾斜摄影三维影像模型制作', '1:500', 'km²', '4.0', '2021-07-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (1243, '1648881410970475344', '正射影像大图制作（含地质灾害点标注）', '1:500', 'km²', '4.0', '2021-07-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (1244, '1648881410970356648', '溪洛渡水电站天星坝水库干渠新方案地类地形图测绘（1:2000）', '1:2000', 'km²', '22.38', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1245, '1648881410970356648', '金沙江溪洛渡水电站天星坝水库右干渠地地类形图测绘（1：1000）', '1:1000', 'km²', '1.6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1246, '1648881410970356648', '溪洛渡天星坝输水隧洞进水口1：500地形地类图测绘', '1:500', 'km²', '0.1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1247, '1648881410970356648', '溪洛渡天星坝左右干渠1:2000地形地类图测绘', '1:2000', 'km²', '28.96', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1248, '1648881410970356648', '金沙江溪洛渡水电站天星坝水库干管1:2000地形地类图测绘', '1:2000', 'km²', '13.31', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1249, '1648881410970356648', '天星坝水库输水干管1:2000地形地类图测绘测', '1:2000', 'km²', '9.61', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1250, '1648881410970220958', '1:500竣工规划图测绘、绿化面积测绘、建筑基底面积测绘、车位面积测绘', NULL, 'm²', '39988 ', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1251, '1648881410970220958', '验测高程、高度、验测平面位置', NULL, '栋', '3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1252, '1648881410970220958', '产权面积测绘', NULL, 'm²', '19353.9', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1253, '1648881410970220958', '1:500地籍图', NULL, '亩', '59.982', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1254, '1648881410970220958', '幢图', NULL, '栋', '3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1255, '1648881410963115554', '简阳市50平方公里及以上河湖划界项目', NULL, NULL, NULL, '2020-12-31', '工作内容详见“第三条服务内容与质量标准。”合同签订备案后90个工作日提交初步成果文件,120个工作日内完成本项目要求的所有服务内容。');
INSERT INTO `cmc_contract_work` VALUES (1256, '1648881410962635508', '完成所属河流及湖泊的测绘工作，完成所属河流及湖泊的数字线划专用图（DLG）、数字正射影像（DOM）、数字高程模型（DEM）制作。', NULL, '项', '1', '2021-07-31', '完成甘孜州2020年河长制水生态保护河湖（19条州级河流及125个常年湖面面积1km2以下湖泊）管理范围划定项目第 4 包范围内规定的甘孜州境内革什扎河、东谷河、小金川、田湾河、松林河、绰斯甲河河流的管理范围划定工作。');
INSERT INTO `cmc_contract_work` VALUES (1257, '1648881410962635508', '完成所属河流及湖泊的洪水分析计算。', NULL, '项', '1', '2021-07-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1258, '1648881410962635508', '确定所属河流及湖泊管理范围，绘制各河流或湖泊的管理范围线图。', NULL, '项', '1', '2021-07-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1259, '1648881410962635508', '完成所属河流及湖泊管理范围管理桩牌实地放样。', NULL, '项', '1', '2021-07-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1260, '1648881410962635508', '完成所属河流及湖泊管理线桩牌及告示牌制作与安装埋设。', NULL, '项', '1', '2021-07-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1261, '1648881410962635508', '完成所属河流及湖泊划界成果数据提交入库。', NULL, '项', '1', '2021-07-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1262, '1648881410962620417', '芦山抽水蓄能电站渣场、施工及交通1:2000地形图', '1:2000', 'km²', '7.1', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1263, '1648881410962620417', '芦山抽水蓄能电站枢纽区1:1000地形图', '1:1000', 'km²', '10.1', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1264, '1648881410962620417', '芦山抽水蓄能电站灰岩料场1:1000地形图', '1:1000', 'km²', '0.4', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1265, '1648881410962620417', '芦山抽水蓄能电站砂岩料场1:1000地形图', '1:1000', 'km²', '0.59', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1266, '1648881410962620417', '芦山抽水蓄能电站枢纽区1:1000三维地形面', '1:1000', 'km²', '10.1', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1267, '1648881410962620417', '四等GNSS测量', '四等', '点', '6', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1268, '1648881410962620417', '四等高程测量', '四等', 'km', '16', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1269, '1648881410960592700', '开展雅砻江流域雅砻江、达曲、泥曲，大渡河流域杜柯河、玛柯河、阿柯河的重要栖息地所在河段地形监测工作。提供各大断面测量数据，数据精度及监测要求满足相关规范及甲方要求。', NULL, '项', '1', '2024-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1270, '1648881410952933694', '向甲方提供四川省五大经济区旅游产品发展方向及旅游资源开发条件评价研究等内容。', NULL, '项', '1', '2020-09-30', '2020年7月中旬，乙方向甲方提交《研究》大纲稿；2020年8月底前，乙方向甲方提交《研究》初稿；2020年9月底前，乙方向甲方提交《研究》成果稿。');
INSERT INTO `cmc_contract_work` VALUES (1271, '1648881410948033623', '隧道变形监测', NULL, '点', '28', NULL, '水库蓄水达到蓄水常位（高程425.00）为起始时间 至 监测期暂定2个水文年，当蓄水过程时间太长或漫过洪水位又长期未达到蓄水常位时，应及时与沈阳工程建设指挥部研究确定。');
INSERT INTO `cmc_contract_work` VALUES (1272, '1648881410948033623', '岩堆监测', NULL, '处', '4', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1273, '1648881410948033623', '抗滑桩监测', NULL, '根', '2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1274, '1648881410948033623', '冻土监测', NULL, '孔', '4', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1275, '1648881410948033623', '桥墩受力及变形测量', NULL, '点', '4', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1276, '1648881410948033623', '水库水位监测', NULL, '处', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1277, '1648881410945843202', '拉最工区场地1:1000地类图测绘', '1:1000', 'km²', '0.63', NULL, '工期自合同签订次日起40日历天');
INSERT INTO `cmc_contract_work` VALUES (1278, '1648881410945843202', '首部工区场地1:1000地类图测绘', '1:1000', 'km²', '0.19', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1279, '1648881410945843202', '普沙绒工区场地1:1000地类图测绘', '1:1000', 'km²', '3.92', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1280, '1648881410945843202', '业主营地比选场地1:1000地类图测绘', '1:1000', 'km²', '0.47', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1281, '1648881410945843202', '1#承包商营地场地1:1000（地形及地类）', '1:1000', 'km²', '0.19', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1282, '1648881410945843202', '2#混凝土系统场地1:1000（地形及地类）', '1:1000', 'km²', '0.12', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1283, '1648881410945843202', '木托组工区场地1:1000（地形及地类）', '1:1000', 'km²', '0.44', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1284, '1648881410945843202', '马蹄村工区场地1:1000（地形及地类）', '1:1000', 'km²', '1.19', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1285, '1648881410945843202', '牙根二级及楞古工区施工总布置范围1:5000地类图测绘', '1:5000', 'km²', '297', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1286, '1648881410945843202', '水库区1:2000（地形地类图）', '1:2000', 'km²', '5.8', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1287, '1648881410945843202', '工程区进场道路1:2000（地形图）', '1:2000', 'km²', '44', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1288, '1648881410945843202', '五等GNSS测量', '五等', '点', '12', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1289, '1648881410944784475', '勘测定界测量', NULL, NULL, NULL, NULL, '具体工作内容及要求以任务书为准。');
INSERT INTO `cmc_contract_work` VALUES (1290, '1648881410944784475', '《勘测定界技术报告》：土地分类面积表、土地分类范围略图、界址坐标表等。', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1291, '1648881410944784475', '土地预审与选址意见书办理。', NULL, NULL, NULL, NULL, '含规划选址论证报告、土地预审与选址意见书办理。');
INSERT INTO `cmc_contract_work` VALUES (1292, '1648881410944366976', '1:1000合成孔径雷达扫描', '1:1000', 'km²', '0.6', NULL, '按照实际完成工程量结算。');
INSERT INTO `cmc_contract_work` VALUES (1293, '1648881410944366976', '1:1000多光谱雷达扫描', '1:1000', 'km²', '0.4', NULL, '按照实际完成工程量结算。');
INSERT INTO `cmc_contract_work` VALUES (1294, '1648881410944366976', '1:200合成孔径雷达扫描', '1:200', 'km', '20', NULL, '按照实际完成工程量结算。');
INSERT INTO `cmc_contract_work` VALUES (1295, '1648881410944366976', '1:500 合成孔径雷达扫描', '1:500', 'km', '8.5', NULL, '按照实际完成工程量结算。');
INSERT INTO `cmc_contract_work` VALUES (1296, '1648881410942904590', '邻水县小西河、柑子铺河、观音河、甘坝河、桥坝河、大湾河、九龙河、大石河等8条县级河流岸线划定', NULL, NULL, NULL, '2020-10-20', '本合同期限；乙方从2020年1月10日开工，至2020年10月底完成竣工并向甲方交付工作成果。');
INSERT INTO `cmc_contract_work` VALUES (1297, '1648881410942593459', '按照耕地质量等级调查拟定点，按照《测土配方施肥技术规程》（NYT2911-2016），开展野外调查与取样。', NULL, '项', '1', '2021-12-13', NULL);
INSERT INTO `cmc_contract_work` VALUES (1298, '1648881410942593459', '完成清新区范围农作物施肥情况调查120个，做好农户施肥调查台账。', NULL, '项', '1', '2021-12-13', NULL);
INSERT INTO `cmc_contract_work` VALUES (1299, '1648881410942593459', '按要求将“农户施肥情况调查表”和“农户施肥调查汇总表”刻录成光盘寄送给市级负责人。', NULL, '项', '1', '2021-12-13', NULL);
INSERT INTO `cmc_contract_work` VALUES (1300, '1648881410942099989', '利用现有地下管线普查数据成果，在普查更新范围内采用全野外探测及内外业结合核实探测的方式摸清地下管线类型、管线属性等基本情况，收集地下管线隐患信息资料并入库', NULL, '项', '1', NULL, '具体要求见合同第二条“项目内容及要求”');
INSERT INTO `cmc_contract_work` VALUES (1301, '1648881410934959316', '1:2000线路地形图测绘', NULL, 'km²', '1.443', NULL, '合同签订后15个日历天完成合同工作内容');
INSERT INTO `cmc_contract_work` VALUES (1302, '1648881410933291569', '取得JX水电站征占用草地行政批复提供技术服务', NULL, '项', '1', NULL, '详见合同第二条“合同的内容和要求”');
INSERT INTO `cmc_contract_work` VALUES (1303, '1648881410929631852', '1:2000地形图测量', '1:2000', 'km²', '90', NULL, '包含1:2000地形图，5厘米分辨率正射影像');
INSERT INTO `cmc_contract_work` VALUES (1304, '1648881410929631852', '基础控制测量', NULL, 'km', '31', NULL, '包含四等点、一级导线点、四等水准测量（四等点5公里2个点，一级导线点每公里2个）');
INSERT INTO `cmc_contract_work` VALUES (1305, '1648881410929631852', '纵断面测量31KM', NULL, 'km', '31', NULL, '按线路长度计算，（参照道路断面测量0.6倍计算）');
INSERT INTO `cmc_contract_work` VALUES (1306, '1648881410929631852', '横断面测量35KM', NULL, 'km', '35', NULL, '按断面长度计算，（参照道路断面测量0.6倍计算）');
INSERT INTO `cmc_contract_work` VALUES (1307, '1648881410929631852', '桥梁高等级控制测量', NULL, '座', '2', NULL, '包含二三等控制、水准测量');
INSERT INTO `cmc_contract_work` VALUES (1308, '1648881410929631852', '水下地形图测量', NULL, 'km²', '0.9', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1309, '1648881410929065985', '1:2000地形地类图测绘', '1:2000', 'km²', '9.2', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1310, '1648881410929065985', '四等GNSS测量（预估）', '四等', '点', '6', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1311, '1648881410929065985', '四等三角高程测量（预估）', '四等', 'km', '64', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1312, '1648881410924523895', '阿斯布土料场、当卡料场1:1000地形图修补测', '1:1000', 'km²', '0.5', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1313, '1648881410924523895', '阿斯布土料场、当卡料场1:1000三维地形面制作', '1:1000', '幅', '5', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1314, '1648881410924523895', '坝区开挖竣工1:1000地形图修补测', '1:1000', 'km²', '2', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1315, '1648881410924523895', '坝区开挖竣工区域1:1000三维地形面制作', '1:1000', '幅', '8', NULL, '合同签订后15日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1316, '1648881410923839163', '大熊猫国家公园什邡片区勘界立标实施方案编制', NULL, NULL, NULL, '2022-12-31', '详见合同第三条“服务内容与技术要求”');
INSERT INTO `cmc_contract_work` VALUES (1317, '1648881410923839163', '界线勘测，制定界线主张线图等', NULL, NULL, NULL, '2022-12-31', '详见合同第三条“服务内容与技术要求”');
INSERT INTO `cmc_contract_work` VALUES (1318, '1648881410923839163', '大熊猫国家公园什邡片区勘界立标技术设计文件', NULL, NULL, NULL, '2022-12-31', '详见合同第三条“服务内容与技术要求”');
INSERT INTO `cmc_contract_work` VALUES (1319, '1648881410923839163', '填写界桩点登记表，绘制界桩点略图及说明，编制界线走向说明、边界地形图绘制等；', NULL, NULL, NULL, '2022-12-31', '详见合同第三条“服务内容与技术要求”');
INSERT INTO `cmc_contract_work` VALUES (1320, '1648881410923839163', '在所有实体桩点埋设完成后进行实际埋设点位的测量，通过实测数据作为基础，将大熊猫国家公园的实体桩矢量化；', NULL, NULL, NULL, '2022-12-31', '详见合同第三条“服务内容与技术要求”');
INSERT INTO `cmc_contract_work` VALUES (1321, '1648881410923839163', '建设界桩数据库信息管理系统并完成数据入库工作。', NULL, NULL, NULL, '2022-12-31', '详见合同第三条“服务内容与技术要求”');
INSERT INTO `cmc_contract_work` VALUES (1322, '1648881410921280755', '库区1:2000地形地类图坐标转换', NULL, '点', '440', '2021-02-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1323, '1648881410921280755', '施工场地、坝址区1:2000地形图坐标转换', NULL, '点', '252', '2021-02-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1324, '1648881410921280755', '施工场地1:2000地形图坐标转换', NULL, '点', '220', '2021-02-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1325, '1648881410921280755', '施工区（孟底沟）1：2000地形地类图坐标转换', NULL, '点', '64', '2021-02-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1326, '1648881410921280755', '施工区（张牙沟）1：2000地形地类图坐标转换', NULL, '点', '24', '2021-02-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1327, '1648881410921280755', '施工区（张牙沟）1：2000地形地类图坐标转换', NULL, '点', '28', '2021-02-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1328, '1648881410921280755', '张牙沟左岸山脊施工场地补测1:2000地形图坐标转换', NULL, '点', '4', '2021-02-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1329, '1648881410921280755', '施工用地范围复核图坐标转换', NULL, '点', '156', '2021-02-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1330, '1648881410914560063', '以部下发的2022年度变更调查遥感监测成果为基础，结合各级2022年度内开展的月度、季度或半年监测发现的各类国土利用变化信息，制作2022年度变更调查外业调查工作底图（以下简称“工作底图”）。', NULL, '项', '1', '2023-09-01', '2023年9月1日前，完成乳源瑶族自治县2022年度国土变更调查工作（含成果提交、整改和完善工作）。具体完成时间以上级的要求的时间节点为准）。');
INSERT INTO `cmc_contract_work` VALUES (1331, '1648881410914560063', '以实地现状认定地类为原则，调查工作底图上每一块变化图斑的地类、属性、范围、权属等实际情况；对实际地类与卫星遥感影像判读不一致的及按要求需要举证的图斑，逐一实地拍照举证。', NULL, '项', '1', '2023-09-01', NULL);
INSERT INTO `cmc_contract_work` VALUES (1332, '1648881410914560063', '在2021年度国土调查数据库基础上，按照数据库更新技术要求，形成2022年度国土变更调查更新数据增量包，报广东省国土资源厅和自然资源部。', NULL, '项', '1', '2023-09-01', NULL);
INSERT INTO `cmc_contract_work` VALUES (1333, '1648881410914560063', '部省组织专业队伍对2022年度变更调查更新数据的真实性，对内业核查发现的疑似错误图斑，作业单位实地核实整改、补充举证并上报整改成果。', NULL, '项', '1', '2023-09-01', NULL);
INSERT INTO `cmc_contract_work` VALUES (1334, '1648881410914560063', '开展2021年度和2022年度耕资源质量分类成果更新与监测。', NULL, '项', '1', '2023-09-01', NULL);
INSERT INTO `cmc_contract_work` VALUES (1335, '1648881410914560063', '部省市要求的关于2022年度国土变更调查除以上内容之外，省市县对于该项工作有新规定、要求的，从其规定和要求。', NULL, '项', '1', '2023-09-01', NULL);
INSERT INTO `cmc_contract_work` VALUES (1336, '1648881410912288769', '工程区1:2000地形图测绘（岸上）', '1:2000', 'km²', '0.6', NULL, '合同签订后20日历天内完成并提交最终成果报告');
INSERT INTO `cmc_contract_work` VALUES (1337, '1648881410912288769', '工程区1:2000地形图测绘（水下）', '1:2000', 'km²', '1.4', NULL, '合同签订后20日历天内完成并提交最终成果报告');
INSERT INTO `cmc_contract_work` VALUES (1338, '1648881410912288769', '工程区1:5000地形图', '1:5000', 'km²', '12.56', NULL, '合同签订后20日历天内完成并提交最终成果报告');
INSERT INTO `cmc_contract_work` VALUES (1339, '1648881410912288769', '1:2000三维地形面制作', '1:2000', 'km²', '2', NULL, '合同签订后20日历天内完成并提交最终成果报告');
INSERT INTO `cmc_contract_work` VALUES (1340, '1648881410912288769', '1:5000三维地形面制作', '1:5000', 'km²', '12.56', NULL, '合同签订后20日历天内完成并提交最终成果报告');
INSERT INTO `cmc_contract_work` VALUES (1341, '1648881410911342315', '重庆轨道交通4号线西延伸段工程范围内的施工监测及控制测量工作', NULL, NULL, NULL, NULL, '详细工作内容见合同文本“第二条  工程范围及内容”。本工程的工期：自本合同签订之日起至2024年12月底配合全线完成土建施工、铺轨工程等总包项目范围内工作。合同完工前完成合同工作并通过发包人的验收提交最终成果。');
INSERT INTO `cmc_contract_work` VALUES (1342, '1648881410910076058', '乳源瑶族自治县新农村示范性综合楼建设项目沉降观测', NULL, '项', '1', '2024-05-31', '本项目为内容为重要的工业建筑物，为高程住宅建筑物。根据甲方沉降观测点布点要求，按照15m左右的间距布设一个沉降观测点，共计约埋设20个沉降监测点等。另外，结合沉降监测需要，在观测区域以外埋设3个沉降观测基准点。');
INSERT INTO `cmc_contract_work` VALUES (1343, '1648881410909582214', '制作太子山林场、石龙镇、永漋镇镇区范围 1:1000 地形图，含生产数字高程模型（DEM）、数字正射影像（DOM）、数字线划图（DLG）及数据库', '1:1000', 'km²', ' 12', NULL, '乙方应于本合同签订生效后180个日历天，完成本项目工作任务和验收质检。如甲方未能按合同要求如期提供相关资料或相关技术方案审定时间超过本合同规定或出现不可抗力（如新冠疫情防控）导致乙方无法按期履行本合同，则工期顺延。');
INSERT INTO `cmc_contract_work` VALUES (1344, '1648881410909582214', '太子山林场、石龙镇、永漋镇区域范围1:2000 比例尺地形图全覆盖，含生产数字线划图（DLG）、数字高程模型(DEM)及数据库。', '1:2000', 'km²', ' 397.86', NULL, '乙方应于本合同签订生效后180个日历天，完成本项目工作任务和验收质检。如甲方未能按合同要求如期提供相关资料或相关技术方案审定时间超过本合同规定或出现不可抗力（如新冠疫情防控）导致乙方无法按期履行本合同，则工期顺延。');
INSERT INTO `cmc_contract_work` VALUES (1345, '1648881410908090468', '全面核实粮食生产功能区与严格管控类耕地重叠部分', NULL, '项', '1', '2021-10-15', '乙方应于2021年10月15日前完成清城区粮食生产功能区调整补划工作，并提交数据库。');
INSERT INTO `cmc_contract_work` VALUES (1346, '1648881410908090468', '实地核查补划粮食生产功能区', NULL, '项', '1', '2021-10-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (1347, '1648881410908090468', '完善清城区粮食生产功能区数据库并提交广东省农业农村厅', NULL, '项', '1', '2021-10-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (1348, '1648881410906269866', '新建重庆至黔江铁路站前工程CQQJZQ-5标段精测网复测', NULL, '项', '1', '2024-08-20', '2020年08月20日- 2024年08月20日，共9次复测');
INSERT INTO `cmc_contract_work` VALUES (1349, '1648881410906027454', '奔戈场址范围1：2000地形图测绘', '1:2000', 'km²', '96.36', NULL, '承包人应在确定为中标单位后的3日内进场，提交最终测绘成果时间不得晚于测绘进场工作后20日内。');
INSERT INTO `cmc_contract_work` VALUES (1350, '1648881410906027454', '集电线路范围1：2000地形图测绘', '1:2000', 'km²', '10', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1351, '1648881410903259030', '长坝居民点引水线路1:1000地形图测量', '1:1000', 'km²', '1.02', NULL, '合同签订之日起20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1352, '1648881410903259030', '长坝居民点取水口1:500地形图测量', '1:500', 'km²', '0.18', NULL, '合同签订之日起20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1353, '1648881410903259030', '章古山土地开发整理工程1:1000地形地类图测绘', '1:1000', 'km²', '1.25', NULL, '合同签订之日起20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1354, '1648881410898434330', '取得JX水电站征占用林地行政批复提供技术服务', NULL, '项', '1', NULL, '详见合同第二条“合同的内容和要求”');
INSERT INTO `cmc_contract_work` VALUES (1355, '1648881410892891237', '坐标转换（转成80西安坐标系）', NULL, '点', '900', '2021-06-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (1356, '1648881410892891237', '坐标转换（转成经纬度坐标）', NULL, '点', '900', '2021-06-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (1357, '1648881410890414687', '对重庆保税港区开发管理集团有限公司管辖的区域截至2020年8月30日前已建成市政道路的市政消火栓进行现场核查，本次市政消火栓核查工作区域为2020年8月30日前已建成市政道路约103.16公里(其中水港15.52公里，空港87.64公里)，进行市政消火栓核查 。', NULL, 'km', '103.16', '2020-09-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (1358, '1648881410887847807', '甲方根据项目需要，在本协议期限内，委托乙方安排专业人员协助完成测绘地理信息成果质量检验数据采集工作。', NULL, '项', '1', '2025-12-31', '2022年12月10日至2025年12月31日');
INSERT INTO `cmc_contract_work` VALUES (1359, '1648881410887197715', '道路定桩（放线）', NULL, 'km', '7.622', '2021-04-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (1360, '1648881410887197715', '道路竣工测绘', NULL, 'km', '3.49', '2021-04-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (1361, '1648881410887197715', '给水管线测绘', NULL, 'km', '3.191', '2021-04-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (1362, '1648881410887197715', '污水管线测绘', NULL, 'km', '2.93', '2021-04-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (1363, '1648881410887197715', '通讯管线测绘', NULL, 'km', '0.736', '2021-04-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (1364, '1648881410887197715', '路灯管线测绘', NULL, 'km', '3.041', '2021-04-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (1365, '1648881410887197715', '治安监控管线测绘', NULL, 'km', '3.737', '2021-04-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (1366, '1648881410887197715', '雨水渠线路测绘', NULL, 'km', '2.915', '2021-04-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (1367, '1648881410887197715', '信号灯线路测绘', NULL, 'km', '0.328', '2021-04-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (1368, '1648881410883917489', '1:500竣工规划图测绘、绿化面积测绘、建筑基底面积测绘、车位面积测绘', '1:500', 'm²', '86438.38', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1369, '1648881410883917489', '产权面积测绘', NULL, 'm²', '32747.12', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1370, '1648881410883138636', '范围起于洪崖洞人行天桥西侧，止于朝天门朝东路路口南，因两端都有延伸且包含两处立交桥分线，总长约2公里的道路模型制作', NULL, '项', '1', NULL, '合同签订后10个工作日。');
INSERT INTO `cmc_contract_work` VALUES (1371, '1648881410879477066', '泄洪闸消力池、左右边墙水下检查', NULL, '项', '1', '2020-04-30', '自本项目合同签订之日开始，总服务期限3 个月内。');
INSERT INTO `cmc_contract_work` VALUES (1372, '1648881410879477066', '泄洪洞进口，包括混凝土垫层段、进口闸室段水下检查', NULL, '项', '1', '2020-04-30', '自本项目合同签订之日开始，总服务期限3 个月内。');
INSERT INTO `cmc_contract_work` VALUES (1373, '1648881410879477066', '泄洪洞出口，包括出口闸室段、扩散段检查', NULL, '项', '1', '2020-04-30', '自本项目合同签订之日开始，总服务期限3 个月内。');
INSERT INTO `cmc_contract_work` VALUES (1374, '1648881410879477066', '整理形成数字化检测成果及检查报告', NULL, '项', '1', '2020-04-30', '自本项目合同签订之日开始，总服务期限3 个月内。');
INSERT INTO `cmc_contract_work` VALUES (1375, '1648881410878734337', '河段1:1000地形图测绘', '1:1000', 'km²', '0.74', NULL, '合同签订日期第二日起算，15日历天内完成外业工作；');
INSERT INTO `cmc_contract_work` VALUES (1376, '1648881410878734337', '1:1000断面测量', '1:1000', 'km', '1.8', NULL, '合同签订后30日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (1377, '1648881410878734337', '断面基点测量', NULL, '点', '16', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1378, '1648881410878734337', '流量测验', NULL, '个', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1379, '1648881410878734337', '1:1000水边线测量', NULL, 'km', '5.3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1380, '1648881410878734337', '转换点采集（坐标转换用）', NULL, '点', '10', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1381, '1648881410878734337', '施工用地范围图坐标转换及shp制作', NULL, '点', '80', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1382, '1648881410877278518', '简阳市集体土地、农房及宅基地确权登记测绘服务农房及宅基地：数学精度、要素质量、资料质量。', NULL, NULL, NULL, NULL, '检验范围：涉及普安乡、平武镇、三合镇、青龙镇、三星镇、新星乡、踏水镇、金马镇、五合乡等9个乡镇的集体土地2344宗和宅基地52603户。');
INSERT INTO `cmc_contract_work` VALUES (1383, '1648881410877278518', '简阳市集体土地、农房及宅基地确权登记测绘服务2）集体土地：界址点及面积精度、要素质量、资料质量。', NULL, NULL, NULL, NULL, '甲方须在合同签订后及时向乙方提交完整检验资料，乙方收到甲方提交完整检验资料后30个工作日内出具检验报告。');
INSERT INTO `cmc_contract_work` VALUES (1384, '1648881410877278518', '1）宗地图：以乡镇划分检验批，以行政村为样本单元，每批次按照不低于辖区内行政村总数的 30  %，每个行政村不少于 30  户进行抽样，采用实地结合室内检查方式。', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1385, '1648881410877278518', '2）农房面积测算：以乡镇划分检验批，以行政村为样本单元，每批次按照不低于辖区内行政村总数的 30   %，每个行政村不少于 30  户进行抽样，采用实地结合室内检查方式。', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1386, '1648881410877278518', '3）集体土地:不低于应完成宗数的5%。', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1387, '1648881410871330251', '贵州桐梓县假果山风电场场址1:2000地形图测绘', '1:2000', 'km²', '11.6', '2021-10-25', NULL);
INSERT INTO `cmc_contract_work` VALUES (1388, '1648881410866642195', '完成水口电站坝区控制网复测，监测坝区控制网的变位情况，并结合测量成果对坝区控制网变位情况进行分析。', NULL, NULL, NULL, '2024-11-30', '乙方自合同签订之日起45日内进场作业，2024年9月30日前提交正式技术报告。');
INSERT INTO `cmc_contract_work` VALUES (1389, '1648881410866642195', '水口电站坝区一等平面控制网测量', NULL, '点', '18', '2024-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1390, '1648881410866642195', '水口电站坝区一等高程控制网测量', NULL, 'km', '10.3', '2024-11-30', '路线总长约10.3km，共74点（包含24个监测控制点和50个变形监测点）');
INSERT INTO `cmc_contract_work` VALUES (1391, '1648881410866642195', '观测资料整理，观测成果计算，控制网稳定性分析评价 ', NULL, '项', '1', '2024-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1392, '1648881410862884037', '对新疆哈密抽水蓄能电站工程区通过采用三维航测等新技术进行原始地形测量，获取工程区域高精度三维地形数据，建立电站三维模型，三维模型作为施工建设的原始数字化依据，应涵盖各处坐标点、高程等数据。', NULL, '项', '1', '2026-01-14', '技术服务期限：65个月(2020年8月15日至2026年1月14日)，具体以完成项目区整体地形数据采建及模型建立并提出相应工作成果为准。');
INSERT INTO `cmc_contract_work` VALUES (1393, '1648881410861985600', '资料收集', NULL, '项', '1', NULL, '对全县89个村社，475个村民小组的集体土地所有权界线，按照相关文件的要求，结合高分辨率正射遥感影像图，对原根据“二调”成果完成的全县集体土地所有权确权登记成果进行核实、调整和更新。全面摸清辖区范围内原集体土地所有权确权登记底数及发生变化的情况，制定符合实际情况的技术路线，开展成果入库更新汇交工作。');
INSERT INTO `cmc_contract_work` VALUES (1394, '1648881410861985600', '数据整理与分析', NULL, '项', '1', NULL, '详见合同第三条');
INSERT INTO `cmc_contract_work` VALUES (1395, '1648881410861985600', '制定实施方案和技术路线', NULL, '项', '1', NULL, '2023年9月底前根据《不动产登记数据库标准》《集体土地所有权确权登记成果汇交指南》等技术规范要求，将现有集体土地所有权确权登记成果，纳入不动产登记数据库，并完成数据更新；2023年10月底前完成成果汇交。');
INSERT INTO `cmc_contract_work` VALUES (1396, '1648881410861985600', '已有登记成果整合入库', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1397, '1648881410861985600', '更新集体土地所有权确权登记成果', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1398, '1648881410861985600', '数据成果汇交', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1399, '1648881410861585685', '工程区1:5000地形图', '1:5000', 'km²', '4.80', NULL, '补充协议签订后15日历天内完工');
INSERT INTO `cmc_contract_work` VALUES (1400, '1648881410860814863', '大坝压重体平台外轮廓至猴子岩大桥下游约200m范围1:1000地形图测绘', '1:1000', 'km²', '0.39', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1401, '1648881410860814863', '大坝压重体平台外轮廓至猴子岩大桥下游约500m河段1:500同时水面线测量', '1:1000', 'km²', '2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1402, '1648881410860814863', '大桥下游约200m处河道1:500横断面测量', '1:500', 'km', '0.3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1403, '1648881410860814863', '尾水出口断面1:500横断面测量', '1:500', 'km', '0.3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1404, '1648881410860814863', '断面基点测量', NULL, '点', '4', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1405, '1648881410855458250', '利用现有地下管线普查数据成果，在普查更新范围内采用全野外探测及内外业结合核实探测的方式摸清地下管线类型、管线属性等基本情况，收集地下管线隐患信息资料并入库', NULL, '项', '1', '2022-10-31', '本项目预估工作量为：全野外探测管线约1331.78公里，内外业结合核实探测管线约895.85公里。');
INSERT INTO `cmc_contract_work` VALUES (1406, '1648881410851279616', '风电场范围1:2000地形图测绘', '1:2000', 'km²', '63.3', NULL, '合同签订后的30天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1407, '1648881410851279616', '风机机位1:500地形图测绘', '1:500', 'km²', '4.5', NULL, '合同签订后的30天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1408, '1648881410849374209', '1:2000地形图', '1:2000', 'km²', '6.8', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1409, '1648881410849374209', '1:5000地形图', '1:5000', 'km²', '23.9', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1410, '1648881410843124272', '为JX水电站使用土地手续办理，取得行政批复提供技术服务', NULL, '项', '1', NULL, '详见合同第二条“合同的内容和要求”');
INSERT INTO `cmc_contract_work` VALUES (1411, '1648881410840613277', '景区内规划用地约1200亩土地1:500地形图测绘工作', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1412, '1648881410840613277', '测量控制点埋设', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1413, '1648881410839617904', '资料收集', NULL, '项', '1', NULL, '详见合同第三条工作内容');
INSERT INTO `cmc_contract_work` VALUES (1414, '1648881410839617904', '数据整理与分析', NULL, '项', '1', NULL, '工期：自合同签订之日起150日完成。');
INSERT INTO `cmc_contract_work` VALUES (1415, '1648881410839617904', '制定技术路线', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1416, '1648881410839617904', '现有成果整理入库', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1417, '1648881410839617904', '规范成果集中更新', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1418, '1648881410839617904', '整理登记档案资料', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1419, '1648881410839617904', '验收检查与成果数据汇交', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1420, '1648881410834841431', '二等平面', '二等', '个', '51', NULL, '协议书签订后30天完成全部工作内容。');
INSERT INTO `cmc_contract_work` VALUES (1421, '1648881410834841431', '二等高程', '二等', 'km', '580', NULL, '协议书签订后30天完成全部工作内容。');
INSERT INTO `cmc_contract_work` VALUES (1422, '1648881410834841431', '控制点埋设', NULL, '个', '51', NULL, '协议书签订后30天完成全部工作内容。');
INSERT INTO `cmc_contract_work` VALUES (1423, '1648881410833955924', '升压站1:500地形图测绘', '1:500', 'km2', '2.0', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1424, '1648881410833955924', '风机机位1:500地形图测绘', '1:500', 'km²', '5.8', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1425, '1648881410832596993', '古巴沟渣场及环保专业所需1:1000地形图测绘', '1:1000', 'km²', '9.6', NULL, '工期自合同签订次日起50日历天');
INSERT INTO `cmc_contract_work` VALUES (1426, '1648881410832596993', '拉哇水库CS13~CS20河段1:500地形图测绘', '1:500', 'km²', '4.1', NULL, '合同签订日期第二日起算，30日历天内完成外业工作');
INSERT INTO `cmc_contract_work` VALUES (1427, '1648881410832596993', '拉哇水库CS20~拉哇坝址河段1:2000带状地形测绘', '1:2000', 'km²', '32', NULL, '合同签订后50日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (1428, '1648881410832596993', '三等GNSS测量（预估）', '三等', '点', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1429, '1648881410832596993', '五等GNSS测量（预估）', '五等', '点', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1430, '1648881410832596993', '三等高程测量（预估）', '三等', 'km', '30', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1431, '1648881410830329044', '全面核实粮食生产功能区与严格管控类耕地重叠部分', NULL, '项', '1', '2021-10-15', '乙方应于2021年10月15日前完成阳山县粮食生产功能区调整补划工作，并提交数据库。');
INSERT INTO `cmc_contract_work` VALUES (1432, '1648881410830329044', '实地核查补划粮食生产功能区', NULL, '项', '1', '2021-10-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (1433, '1648881410830329044', '完善阳山县粮食生产功能区数据库并提交广东省农业农村厅', NULL, '项', '1', '2021-10-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (1434, '1648881410826406641', '（一）测量标志普查', NULL, '项', '1', NULL, '详见合同第二条内容。合同签订后至2023年9月底前完成全面重建或迁建的水准点高程联测、大地点坐标测量工作，获得重建或迁建的测量标志的坐标成果。');
INSERT INTO `cmc_contract_work` VALUES (1435, '1648881410826406641', '（二）测量标志维护', NULL, '项', '1', NULL, '详见合同第二条内容。合同签订后至2023年9月底前完成全面重建或迁建的水准点高程联测、大地点坐标测量工作，获得重建或迁建的测量标志的坐标成果。');
INSERT INTO `cmc_contract_work` VALUES (1436, '1648881410826406641', '（三）测量标志委托保管', NULL, '项', '1', NULL, '详见合同第二条内容。合同签订后至2023年9月底前完成全面重建或迁建的水准点高程联测、大地点坐标测量工作，获得重建或迁建的测量标志的坐标成果。');
INSERT INTO `cmc_contract_work` VALUES (1437, '1648881410826406641', '（四）汇总普查维护资料档案', NULL, '项', '1', NULL, '详见合同第二条内容。合同签订后至2023年9月底前完成全面重建或迁建的水准点高程联测、大地点坐标测量工作，获得重建或迁建的测量标志的坐标成果。');
INSERT INTO `cmc_contract_work` VALUES (1438, '1648881410824162394', '整个用地区域面积的测量', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1439, '1648881410824162394', '权属区域面积的测算及其平面图的绘制', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1440, '1648881410824162394', '权属区域1:2000地形测量', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1441, '1648881410824162394', '编制勘测定界报告书', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1442, '1648881410823903865', '霞曲汇口1:1000地形地类图测绘', '1:1000', 'km²', '0.53', '2021-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (1443, '1648881410823903865', '莫汝弄巴泥石流沟1:1000地形图测绘', '1:1000', 'km²', '0.78', '2021-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (1444, '1648881410823903865', '卡许料场1:1000地形地类图测绘', '1:1000', 'km²', '0.3', '2021-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (1445, '1648881410823903865', '外部供水线路1:2000地形图测绘', '1:2000', 'km²', '1.54', '2021-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (1446, '1648881410823903865', '取水口1:500地形图测绘', '1:500', 'km²', '0.22', '2021-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (1447, '1648881410823903865', '崩布隆巴沟炸药库1:1000地形图测绘', '1:1000', 'km²', '0.76', '2021-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (1448, '1648881410823903865', 'G349玉坝桥1:1000地形图测绘', '1:1000', 'km²', '0.15', '2021-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (1449, '1648881410823903865', 'G349恩珠藏布桥1:1000地形图测绘', '1:1000', 'km²', '0.34', '2021-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (1450, '1648881410823903865', 'G349霞曲桥1:1000地形图测绘', '1:1000', 'km²', '0.39', '2021-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (1451, '1648881410823903865', '零星配合工作', NULL, '人.天', '15', '2021-12-20', NULL);
INSERT INTO `cmc_contract_work` VALUES (1452, '1648881410822597241', '青川县河湖管理范围划定（一包）工作', NULL, '项', '1', NULL, '详见合同第一条项目基本情况。完成时间：签订合同后90日内。');
INSERT INTO `cmc_contract_work` VALUES (1453, '1648881410820378356', '枢纽工程建设区征地红线图坐标转换', NULL, '点', '216', NULL, '合同签订后6日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1454, '1648881410820378356', '溪洛渡界桩合并图坐标转换', NULL, '点', '556', NULL, '合同签订后6日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1455, '1648881410819737242', '昌都市四川桥改扩建项目1：500地形图测绘', '1:500', '项', '1', NULL, '签订本合同后，乙方按甲方和设计方对测绘工作的要求进场进行地形图测绘工作。如遇特殊情况（设计变更、工作量变化、不可抗力以及非乙方原因造成的停、窝工等）时，工期顺延。');
INSERT INTO `cmc_contract_work` VALUES (1456, '1648881410815819777', '1:2000地形图', '1:2000', 'km²', '1.1', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1457, '1648881410815819777', '1:1000地形图', '1:1000', 'km²', '5.7', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1458, '1648881410815819777', '四等GNSS测量', '四等', '点', '6', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1459, '1648881410815819777', '四等高程测量', '四等', 'km', '16', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1460, '1648881410811731415', '古蔺县河湖水域岸线管理范围划界项目7条乡级河流、17座水库的水域岸线管理范围划界工作。', NULL, '项', '1', '2020-12-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1461, '1648881410801314792', '1:2000河道纵剖面测量', '1:2000', 'km²', '3.579', '2020-05-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (1462, '1648881410801314792', '1:500河道横剖面测量', '1:500', 'km²', '12.455', '2020-05-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (1463, '1648881410800377254', '全野外探测管线', NULL, 'km', '3215', '2022-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1464, '1648881410800377254', '内外业结合核实探测管线', NULL, 'km', '1985', '2022-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1465, '1648881410800220669', '按甲方下达的生产任务委托书，承担建设项目工程测绘服务工作', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1466, '1648881410798238379', '水毁各工点1:500地形图测绘', '1:500', '人.天', '50', NULL, '合同工期：合同签订之日第二天起算20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1467, '1648881410798238379', '测绘确定水毁各工点位置，路线破坏长度、现有路面标高等', NULL, '点', '800', NULL, '合同工期：合同签订之日第二天起算20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1468, '1648881410798238379', '三等GNSS测量', '三等', '点', '11', NULL, '合同工期：合同签订之日第二天起算20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1469, '1648881410798238379', '五等GNSS测量', '五等', '点', '14', NULL, '合同工期：合同签订之日第二天起算20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1470, '1648881410798238379', '四等三角高程测量', '四等', 'km', '18', NULL, '合同工期：合同签订之日第二天起算20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1471, '1648881410790653953', '枢纽区无人机影像数据采集（倾斜摄影）', NULL, 'km²', '5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1472, '1648881410790653953', '枢纽区像片连测', NULL, 'km²', '5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1473, '1648881410790653953', '枢纽区可量测三维实景模型制作', NULL, 'km²', '5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1474, '1648881410790653953', '配合地质专业危岩体地质复核测量', NULL, '人天', '8', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1475, '1648881410788654845', '对狮泉河水电站大坝高程、水库高程、自动化水位计校验，明确水库高程、大坝监测高程、汛线水位、预警水位等点位进行检验，出具校验报告。', NULL, '项', '1', '2022-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1476, '1648881410787749457', '三等GNSS测量', '三等', '点', '6', NULL, '合同签订之日第二天起算20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1477, '1648881410787749457', '五等导线测量（四等三角高程）', '五等', 'km', '10', NULL, '合同签订之日第二天起算20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1478, '1648881410787749457', '坝区1:1000地形图测量', '1:1000', 'km²', '10.36', NULL, '合同签订之日第二天起算20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1479, '1648881410787749457', '坝址区1:1000水下地形测量', '1:1000', 'km²', '1.0', NULL, '合同签订之日第二天起算20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1480, '1648881410787749457', 'DOM模型', NULL, 'km²', '11.36', NULL, '合同签订之日第二天起算20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1481, '1648881410787749457', '三维地形面制作', NULL, 'km²', '11.36', NULL, '合同签订之日第二天起算20日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1482, '1648881410782571556', '韶关市乳源瑶族自治县南水水库1:1000地形图数据入库项目', '1:1000', 'km²', '118.66', NULL, '按时提交完整入库的数据资料。');
INSERT INTO `cmc_contract_work` VALUES (1483, '1648881410781807294', '大坝变形观测（水平位移、垂直位移、诱导缝变形等）、大坝内部观测（渗漏、压力、渗流、温度等）等观测数据整理、出具观测月报（13个月）及2019年度监测分析报告。', NULL, '项', '1', NULL, '工期：2019年3月1日至2020年4月30日。');
INSERT INTO `cmc_contract_work` VALUES (1484, '1648881410780227510', '1:500地形图', NULL, NULL, NULL, NULL, '具体工作内容及要求以任务书为准 ');
INSERT INTO `cmc_contract_work` VALUES (1485, '1648881410780227510', 'DOM制作（0.5m分辨率）', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1486, '1648881410780227510', '平面及高程控制测量', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1487, '1648881410780227510', '控制点移交工作等', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1488, '1648881410776521153', '平泉街道新桥村储备土地2016-70号地块砂石资源量估算服务工作', NULL, '项', '1', NULL, '工程开工日期暂定为2022年12月9日，以甲方的正式通知为准；工期必须满足建设单位工期要求。');
INSERT INTO `cmc_contract_work` VALUES (1489, '1648881410768387087', '客博园内竣工测量', NULL, 'm²', '21623.52', NULL, '合同签订后10日内');
INSERT INTO `cmc_contract_work` VALUES (1490, '1648881410768387087', '房屋测量', NULL, 'm²', '21623.52', NULL, '合同签订后10日内');
INSERT INTO `cmc_contract_work` VALUES (1491, '1648881410768077938', '勘测定界', NULL, '项', '1', NULL, '合同工期自合同签订之日起90天内。');
INSERT INTO `cmc_contract_work` VALUES (1492, '1648881410768077938', '地籍测绘', NULL, '项', '1', NULL, '合同工期自合同签订之日起90天内。');
INSERT INTO `cmc_contract_work` VALUES (1493, '1648881410768077938', '出让测绘', NULL, '项', '1', NULL, '合同工期自合同签订之日起90天内。');
INSERT INTO `cmc_contract_work` VALUES (1494, '1648881410768077938', '实测地形图', NULL, '项', '1', NULL, '合同工期自合同签订之日起90天内。');
INSERT INTO `cmc_contract_work` VALUES (1495, '1648881410759619061', '对项目实施方案进行总体把关。审核作业单位提供的项目实施方案，对项目实施进度和质量控制提出可行意见，确保方案符合项目总体目标。', NULL, '项', '1', NULL, '自合同签定之日起至2022年度国土变更调查项目建设完毕并通过最终验收。');
INSERT INTO `cmc_contract_work` VALUES (1496, '1648881410759619061', '编写监理方案。按照国家、省、市相关方案及技术规程要求，针对2022年度国土变更调查项目的工作内容，制定科学合理的监理方案。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1497, '1648881410759619061', '开展内外业成果的质量检查。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1498, '1648881410759619061', '开展汇总成果监理工作。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1499, '1648881410759619061', '开展作业进度监理。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1500, '1648881410759619061', '完成采购人要求的2022年度国土变更调查的其他需要监理的相关工作。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1501, '1648881410752886583', '完成山西省沁水县龙港抽水蓄能项目界桩测设工作。主要包括界桩布置设计、现场放线与测量、界桩制作、运输、开挖、埋设、建设征地红线范围图绘制等', NULL, '项', '1', NULL, '1.3工期要求结合山西省沁水县龙港抽水蓄能项目拟定的作业计划，本项目工作进度要求为：1.3.1 2022年10月15日前，完成界桩布置设计工作；1.3.2 2022年10月25日前，完成界桩制作工作；1.3.3 2022年11月15日前，完成现场界桩埋设、界桩放线与测量、征地红线范围图绘制等工作。');
INSERT INTO `cmc_contract_work` VALUES (1502, '1648881410746976608', '根据辖区城市供水主管部门提供的供水管线基础数据，完成辖区范围内的城市供水管线数据整理和补勘补测工作，同时向项目确定的技术保障单位提交成果并进行检查验收，验收合格后提交成果至辖区城市供水主管部门。', NULL, '项', '1', '2020-12-17', '工作内容详见合同第三条.服务内容与主要技术标准。');
INSERT INTO `cmc_contract_work` VALUES (1503, '1648881410744516610', '日岗沟补充1:1000地形图', '1:1000', 'km²', '1.15', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1504, '1648881410744516610', '对外交通1:2000地形图', '1:2000', 'km²', '1.45', NULL, '合同签订日期第二日起算，15日历天内完成外业工作');
INSERT INTO `cmc_contract_work` VALUES (1505, '1648881410744516610', '拉最坝址1:1000地形图', '1:1000', 'km²', '9.67', NULL, '合同签订后30日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (1506, '1648881410744516610', '日岗沟料场至力丘河口河道1:1000三维地形面制作', '1:1000', 'km²', '33', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1507, '1648881410744516610', '等高线提取及坐标转换（预估）', NULL, '点', '844', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1508, '1648881410740602416', '林权登记存量数据分析与标准化整理', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1509, '1648881410740602416', '林权登记存量数据空间信息补充采集', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1510, '1648881410740602416', '建立图形数据、属性数据和档案资料之间的关联关系', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1511, '1648881410740602416', '导入不动产登记数据库', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1512, '1648881410738961210', '日岗沟补充1:1000地形图', '1:1000', 'km²', '4.16', NULL, '补充协议签订后20日历天内完工');
INSERT INTO `cmc_contract_work` VALUES (1513, '1648881410738961210', '日岗沟补充1:5000地形图', '1:5000', 'km²', '6.002', NULL, '补充协议签订后20日历天内完工');
INSERT INTO `cmc_contract_work` VALUES (1514, '1648881410738925672', '内窥检测(CCTV)', NULL, 'km', '15', NULL, '工作内容包括：功能性排查，排水管线内窥检测：完成经开区建成区场镇和小区内部排水管网内窥检测（内窥检测管线管径≥d300），探测到接市政管网的第一个检查井；内窥检测包括检查井、雨水口检查，排水口调查；配合完成整理资料，完成重庆市住房和城乡建设委员会的入库工作。');
INSERT INTO `cmc_contract_work` VALUES (1515, '1648881410738925672', '内窥检测(QV)', NULL, 'km', '10', NULL, '工期要求：80日历天，提交前乙方须完成内部检查验收工作。');
INSERT INTO `cmc_contract_work` VALUES (1516, '1648881410736064124', '内东乡、太平镇、槽元乡、益门镇、云甸镇、六华镇约25700户农村宅基地使用权及地上建筑物、构筑物、和集体建设用地使用权的资料收集、权籍调查、不动产测绘、使用无人机倾斜摄影或三维立体扫描技术进行建模、资料整理归档立卷及扫描数字化、入库前质检、表册卡制作、制证打印、内业审查等工作。', NULL, '项', '1', '2020-12-31', '工作内容详见合同第三条。工作完成时间详见合同第二条。');
INSERT INTO `cmc_contract_work` VALUES (1517, '1648881410731507845', '钻探（含配套的孔内动力触探等孔内试验）', NULL, 'm', '210m/3孔', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1518, '1648881410731507845', '坑（槽）探', NULL, 'm3', '100', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1519, '1648881410731507845', '钻孔声波测井', NULL, 'm', '190', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1520, '1648881410731507845', '钻孔孔内电视', NULL, 'm', '190', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1521, '1648881410731507845', '试验覆盖层抽（注）水试验', NULL, '段', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1522, '1648881410731507845', '基岩常规压水试验', NULL, '段', '31', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1523, '1648881410731507845', '重型动力触探', NULL, 'm/孔', '15/3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1524, '1648881410731507845', '覆盖层物理力学试验（物性试验）', NULL, '组', '3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1525, '1648881410731507845', '覆盖层物理力学试验（室内力学全项试验）', NULL, '组', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1526, '1648881410731507845', '岩石（体）物理力学试验（室内岩石常规试验）', NULL, '项', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1527, '1648881410731507845', '水质简分析', NULL, '件', '2', NULL, '沟水、地下水');
INSERT INTO `cmc_contract_work` VALUES (1528, '1648881410727739393', '草登抽水蓄能电站工程区1:5000地形图', '1:5000', 'km²', '15.63', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1529, '1648881410727739393', '草登抽水蓄能电站工程区1:5000三维地形面', '1:5000', 'km²', '15.63', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1530, '1648881410727739393', '五等GNSS测量（预估）', '五等', '点', '6', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1531, '1648881410727739393', '四等三角高程测量', '四等', 'km', '20', NULL, '工期自合同签订次日起20日历天');
INSERT INTO `cmc_contract_work` VALUES (1532, '1648881410719146467', '四等GNSS测量', '四等', '点', '8', NULL, '合同签订之后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1533, '1648881410719146467', '五等GNSS测量', '五等', '点', '6', NULL, '合同签订之后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1534, '1648881410719146467', '四等三角高程测量（单程双测）', '四等', 'km', '22.4', NULL, '合同签订之后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1535, '1648881410719146467', '1:5000地形图测绘', '1:5000', 'km²', '55.58', NULL, '合同签订之后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1536, '1648881410719146467', '无人机飞行影像数据采集', NULL, '人.天', '9', NULL, '合同签订之后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1537, '1648881410719146467', '1:2000正射影像图（DOM）制作', '1:2000', '幅', '6', NULL, '合同签订之后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1538, '1648881410717990743', '地形图测绘', '1:2000', 'km²', '76', '2019-08-30', '本合同已完成。上传合同扫描件测试OA速度。');
INSERT INTO `cmc_contract_work` VALUES (1539, '1648881410717329443', '水工建筑物工程1:500地形图测绘', '1:500', 'km²', '0.2', NULL, '合同签订后8日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1540, '1648881410717329443', '尾水渠改道工程1:500地形图测绘', '1:500', 'km²', '0.1', NULL, '合同签订后8日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1541, '1648881410717329443', '大坝1:500平面图测绘', '1:500', 'km²', '0.1', NULL, '合同签订后8日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1542, '1648881410710962177', '1:2000地形图', '1:2000', 'km²', '8.1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1543, '1648881410710962177', '五等GNSS测量（预估）', '五等', '点', '8', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1544, '1648881410710962177', '四等三角高程测量', '四等', 'km', '20', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1545, '1648881410707730605', '桂城街道夏南一与平西（兴仁村、蓬涌村、马根村、格涌村）旧村改造项目基础数据初查阶段技术核查', NULL, '间', '150', NULL, '由甲方通知开工, 测量完成后15日内提交核查成果资料。');
INSERT INTO `cmc_contract_work` VALUES (1546, '1648881410706686589', 'CPⅢ建网及复测', NULL, 'km', '15.773', '2020-12-31', '范围：DK264+984.81~DK280+758.27里程内，本合同计划2月1日开工个，结束至评估通过，具体开工日期根据现场工作面的提供时间确定。');
INSERT INTO `cmc_contract_work` VALUES (1547, '1648881410704986343', '三等GPS测量', NULL, '点', '14', NULL, '合同签订并在现场具备生产条件后25日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1548, '1648881410704986343', '五等导线（代替四等三角高程）', NULL, 'km', '25', NULL, '合同签订并在现场具备生产条件后25日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1549, '1648881410704986343', '加密界桩搬运、开挖、安装、埋设', NULL, '根', '668', NULL, '合同签订并在现场具备生产条件后25日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1550, '1648881410704986343', '永久界桩搬运、开挖、安装、埋设', NULL, '根', '31', NULL, '合同签订并在现场具备生产条件后25日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1551, '1648881410704986343', '墙式标志牌制作、搬运、开挖、安装、埋设', NULL, '根', '4', NULL, '合同签订并在现场具备生产条件后25日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1552, '1648881410704986343', '永久界桩和加密界桩放线与测量', NULL, '点', '699', NULL, '合同签订并在现场具备生产条件后25日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1553, '1648881410704986343', '墙式标志牌放线与测量', NULL, '点', '4', NULL, '合同签订并在现场具备生产条件后25日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1554, '1648881410704986343', '界桩点展绘、绘制红线图', NULL, '幅', '9', NULL, '合同签订并在现场具备生产条件后25日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1555, '1648881410704986343', '实物指标调查配合', NULL, '人.天', '21', NULL, '合同签订并在现场具备生产条件后25日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1556, '1648881410704801796', '左岸新德坝1:500地形图测绘', '1:500', 'km²', '0.19', '2020-11-09', NULL);
INSERT INTO `cmc_contract_work` VALUES (1557, '1648881410704801796', '右岸柳林坝未防护地段1:500地形图测绘', '1:500', 'km²', '0.40', '2020-11-09', NULL);
INSERT INTO `cmc_contract_work` VALUES (1558, '1648881410704801796', '闸坝左右岸及闸坝本身1:500地形图测绘', '1:500', 'km²', '0.24', '2020-11-09', NULL);
INSERT INTO `cmc_contract_work` VALUES (1559, '1648881410702539390', '1:500地形图测绘', '1:500', '亩', '3000', '2020-03-09', '巴南区一品街道金田村（由甲方现场指定区域）预计约3000亩区域进行1:500地形图测绘，合同签订之日起5天内提交测绘成果。');
INSERT INTO `cmc_contract_work` VALUES (1560, '1648881410700168790', '重庆轨道交通4号线西延 伸段(一标段)土建2标、土建5标出入段线第三方监测补充工作', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1561, '1648881410697335060', '按照成都市规划和自然资源局相关标准和要求，根据采购人提供的测区范围线，生产县城片区19.37平方公里1:500比例尺数字线划图和正射影像图，并建成基础地理信息数据库，在规定时间内向市规划和自然资源局完成成果汇交。', NULL, '项', '1', NULL, '自合同签订之日起至2020年11月底完成本项目。');
INSERT INTO `cmc_contract_work` VALUES (1562, '1648881410696862705', '完成清新区项目区面积27422.10亩的土地核勘工作，摸清项目区内农作物种植现状，对核勘数据进行上图入库。', NULL, '项', '1', '2021-11-20', '2021年清新区二类及三类耕地范围，各镇具体面积为石潭镇 11531.82 亩，浸潭镇 3991.29 亩，禾云镇 263.84 亩，三坑镇 85.95 亩，山塘镇 5576.50 亩，太和镇 5169.42 亩，太平镇 803.28 亩，共计面积27422.10亩。');
INSERT INTO `cmc_contract_work` VALUES (1563, '1648881410696485210', '开展项目勘测定界、放桩放线和征拆范围内的土地、建（构）筑物以及有关附属设施(如：水泥地、围墙等)测绘，形成测绘成果和报告为评估提供数据支撑，以保障被征收人的合法权益，配合征拆部门加快推进南海区的重点基础设施建设项目的征地拆迁工作。', NULL, '项', '1', NULL, '详见合同第二条“服务内容”。由项目所在的镇（街）征拆办与已确定服务片区的乙方签订服务合同并安排具体工作，并支付相关的服务费用。');
INSERT INTO `cmc_contract_work` VALUES (1564, '1648881410695968877', '林权不动产登记存量数据整合建库', NULL, '项', '1', '2021-12-31', '1.按照不动产登记档案建库和入库的要求，开展存量林权纸质登记档案的扫描、整理、挂接、入库、移交等工作。2.负责林权登记存量数据整合建库、导入不动产登记信息管理基础平台、完成数据汇交。');
INSERT INTO `cmc_contract_work` VALUES (1565, '1648881410694184962', '色达抽水蓄能电站工程区1:2000地形图', '1:2000', 'km²', '9.6', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1566, '1648881410694184962', '色达抽水蓄能电站工程区1:5000地形图', '1:5000', 'km²', '25.2', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1567, '1648881410694184962', '五等GNSS测量（预估）', '五等', '点', '8', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1568, '1648881410694184962', '四等高程测量', '四等', 'km', '16', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1569, '1648881410691938675', '枢纽区1:500水下地形图测绘', '1:500', 'km²', '3.26', NULL, '水下部分3.26km&sup2;(含防洪堤水下地形0.59km&sup2;)。');
INSERT INTO `cmc_contract_work` VALUES (1570, '1648881410691938675', '枢纽区1:500水上地形图测绘', '1:500', 'km²', '0.54', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1571, '1648881410691938675', '枢纽工程淹没示意图CGCS2000转换ArcGIS SHP文件制作', NULL, '点', '184', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1572, '1648881410691938675', '市中区总图CGCS2000坐标转换', NULL, '点', '64', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1573, '1648881410691938675', '五通桥总图1（防洪堤与淹没区重叠）CGCS2000坐标转换', NULL, '点', '88', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1574, '1648881410691938675', '老木孔2000全拼图CGCS2000坐标转换', NULL, '点', '232', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1575, '1648881410691938675', '老木孔全图1000地形图CGCS2000坐标转换', NULL, '点', '220', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1576, '1648881410691938675', '老木孔1:2000/12平方公里地形图CGCS2000坐标转换', NULL, '点', '98', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1577, '1648881410691938675', '杜家场村地形图CGCS2000坐标转换', NULL, '点', '98', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1578, '1648881410691938675', '平安村和白念村地形图CGCS2000坐标转换', NULL, '点', '100', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1579, '1648881410691938675', '板桥电站以上全图CGCS2000坐标转换', NULL, '点', '244', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1580, '1648881410691482684', '坐标、高程点测量', NULL, '点', '16', '2020-05-20', '第一次');
INSERT INTO `cmc_contract_work` VALUES (1581, '1648881410691482684', '1:200地形图测绘', '1:200', 'km²', '0.04', '2020-05-30', '第二次');
INSERT INTO `cmc_contract_work` VALUES (1582, '1648881410687106800', '对两江新区直属街道区域截至2020年6月30日前已建成未测绘的消火栓的分布进行现场测绘，并对原来已测绘的1332个市政消火栓进行核对，合并两江新区直属街道区域全部市政消火栓，按两江新区六个消防中队所管辖的区域制作各中队管辖区域的市政消火栓分布图', NULL, '项', '1', NULL, '合同签订后3日内进场，30日历天内完成全部合同工作。');
INSERT INTO `cmc_contract_work` VALUES (1583, '1648881410687106800', '按市政消火栓测绘规范，测绘消火栓位置制作消火栓分布图和点线表等内业工作，同时协助录入重庆市消火栓建设管理支撑服务系统。', NULL, '项', '1', NULL, '合同签订后3日内进场，30日历天内完成全部合同工作。');
INSERT INTO `cmc_contract_work` VALUES (1584, '1648881410683729479', '诺水河片区、涪阳片区、诺江镇片区农村房地一体确权登记发证工作。', NULL, '项', '1', '2021-12-31', '（一）项目完成时间：2021年12月底前全面完成通江县自然资源和规划局农村“房地一体”确权登记发证采购项目（第四包）。（二）项目实施地点：诺水河片区、涪阳片区、诺江镇片区。（三）后续服务期：2年（自验收合格之日起算）。');
INSERT INTO `cmc_contract_work` VALUES (1585, '1648881410682247824', '卫城光伏场址范围1:500地形图测绘', '1:500', 'km²', '8.5', NULL, '合同签订后30日内完成。');
INSERT INTO `cmc_contract_work` VALUES (1586, '1648881410682247824', '棉桠光伏场址范围1:500地形图测绘', '1:500', 'km²', '6.8', NULL, '合同签订后30日内完成。');
INSERT INTO `cmc_contract_work` VALUES (1587, '1648881410678892336', '大唐普格中梁子区域则洛日风电场1:2000地形图测绘', '1:2000', 'km²', '56.7', '2022-06-07', NULL);
INSERT INTO `cmc_contract_work` VALUES (1588, '1648881410678892336', '马洪风电场项目1:2000地形图测绘', '1:2000', 'km²', '49.5', '2022-06-07', NULL);
INSERT INTO `cmc_contract_work` VALUES (1589, '1648881410675101646', '通过外业调绘、内业处理分析等方式，对约2.28万条、7.7万宗林权数据和11.21万条、55.78万宗土地承包经营权数据进行整理，并同步完成约6万页林权和约15万页土地承包经营权档案资料的扫描、整理、录入工作，建立图、属、档对应关系，实现林权、土地承包经营权数据整合入库及向上级部门汇交成功相关数据。', NULL, '项', '1', NULL, '合同签订后6个月内提交验收合格的数据成果；后续服务2年。');
INSERT INTO `cmc_contract_work` VALUES (1590, '1648881410674477562', '1：1000地形测量', NULL, 'km²', '11', '2021-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1591, '1648881410674477562', '定测', NULL, 'km', '30', '2021-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1592, '1648881410668416776', '岷江干流张坎航电枢纽工程项目界桩布置设计，现场放线与测量、界桩制作、运输、开挖、埋设、建设征地红线范围图绘制等。', NULL, '项', '1', '2023-06-10', '合同签订后 45 日历天向甲方提交岷江干流张坎航电枢纽工程界桩测设报告及批复文件。');
INSERT INTO `cmc_contract_work` VALUES (1593, '1648881410662935365', '控制测量', NULL, '点', '3', NULL, '20个工作日。测绘现场满足相关验收条件后同步进场施测。以双方书面确认的日期为开工日期。');
INSERT INTO `cmc_contract_work` VALUES (1594, '1648881410662935365', '1:500地形数据采集', '1:500', 'm²', '18122.10', NULL, '20个工作日。测绘现场满足相关验收条件后同步进场施测。以双方书面确认的日期为开工日期。');
INSERT INTO `cmc_contract_work` VALUES (1595, '1648881410662935365', '验测平面位置', NULL, '边', '2', NULL, '20个工作日。测绘现场满足相关验收条件后同步进场施测。以双方书面确认的日期为开工日期。');
INSERT INTO `cmc_contract_work` VALUES (1596, '1648881410662935365', '验测高程、高度', NULL, '栋', '2', NULL, '20个工作日。测绘现场满足相关验收条件后同步进场施测。以双方书面确认的日期为开工日期。');
INSERT INTO `cmc_contract_work` VALUES (1597, '1648881410662935365', '规划面积测量', NULL, 'm²', '38552.72', NULL, '20个工作日。测绘现场满足相关验收条件后同步进场施测。以双方书面确认的日期为开工日期。');
INSERT INTO `cmc_contract_work` VALUES (1598, '1648881410662935365', '地下管线测量', NULL, 'km', '1', NULL, '20个工作日。测绘现场满足相关验收条件后同步进场施测。以双方书面确认的日期为开工日期。');
INSERT INTO `cmc_contract_work` VALUES (1599, '1648881410662935365', '人防竣工测量', NULL, 'm²', '5287', NULL, '20个工作日。测绘现场满足相关验收条件后同步进场施测。以双方书面确认的日期为开工日期。');
INSERT INTO `cmc_contract_work` VALUES (1600, '1648881410662935365', '房产面积测量', NULL, 'm²', '38552.72', NULL, '20个工作日。测绘现场满足相关验收条件后同步进场施测。以双方书面确认的日期为开工日期。');
INSERT INTO `cmc_contract_work` VALUES (1601, '1648881410660630529', '1:2000地形图', '1:2000', 'km²', '13.5', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1602, '1648881410660630529', '五等GNSS测量（预估）', '五等', '点', '6', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1603, '1648881410660630529', '四等三角高程测量', '四等', 'km', '15', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (1604, '1648881410649460614', '1:500地形图测绘', '1:500', 'km²', '0.051', NULL, '本协议服务期限自本协议签订之日起，至双流思达能地形图测量项目通过甲方的评审合格。');
INSERT INTO `cmc_contract_work` VALUES (1605, '1648881410649460614', '土方量计算', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1606, '1648881410649460614', '五等GNSS控制测量', '五等', '点', '3', NULL, '含高程测量');
INSERT INTO `cmc_contract_work` VALUES (1607, '1648881410649435558', '完成成都高新区城镇开发边界建设现状范围内约123平方公里的城市级实景三维数据生产', NULL, '项', '1', '2000-01-01', '包括0.5米格网数字高程模型（DEM）、0.5米格网数字表面模型（DSM）、0.05米分辨率数字真正射影像（TDOM）和实景三维模型（MESH三维模型）、单体化三维模型和1:500比例尺数字线划图（DLG）的生产更新，以及各类数据成果汇交入库任务');
INSERT INTO `cmc_contract_work` VALUES (1608, '1648881410643459009', '四川德阳高速公路项目K29+000~K34+000 线路范围内的控制测量。', NULL, '点', '10', '2021-06-15', NULL);
INSERT INTO `cmc_contract_work` VALUES (1609, '1648881410641620227', '南网数研院航飞影像服务建设：包 3 粤西（湛江，茂名，阳江，云浮）项目提供专业技术服务', NULL, '项', '1', NULL, '合同签订后一个月内提交成果。工作内容及要求详见附件：南网数研院航飞影像服务建设项目技术协议书');
INSERT INTO `cmc_contract_work` VALUES (1610, '1648881410640506692', '五等 GNSS 测量', '五等', '点', '6', NULL, '乙方应在合同生效之日起 30 天内，按本合同向甲方提交本项目中间成果报告、最终成果报告及相关资料。');
INSERT INTO `cmc_contract_work` VALUES (1611, '1648881410640506692', '四等三角高程测量', '四等', 'km', '40', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1612, '1648881410640506692', '1：5000 地形图测绘', '1:5000', 'km²', '18.5', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1613, '1648881410639574064', '南海区桂澜路北延线工程二期（里水段）项目测量工程进行地籍及房产测绘、建、（构）筑物测绘', NULL, '项', '1', NULL, '单价合同，委托服务期间自 2021年 5 月至本项目完成止。');
INSERT INTO `cmc_contract_work` VALUES (1614, '1648881410631270464', '2024年主汛前完成对金沙大坝近坝库区和尾水淤积断面及荷花池大桥生态流量监测断面进行测量工作，在2024年汛后、银江水电站蓄水前再次完成对坝下尾水泥沙淤积及荷花池大桥生态流量监测断面进行测量工作', NULL, '项', '1', '2024-12-30', '具体测量时间段以甲方通知为准');
INSERT INTO `cmc_contract_work` VALUES (1615, '1648881410631270459', '四川雅砻江两河口水电站工程测量中心延期服务', NULL, '月', '36', NULL, '本次续签服务合同期限暂定为2021年1月16日起至2024年1月15日止，共36个月。根据工程进展，经双方协商后，可提前中止或延长服务期限，双方不因此提出其他索赔和补偿要求。');
INSERT INTO `cmc_contract_work` VALUES (1616, '1648881410631270458', '施绰斯甲水电站工程测量中心技术服务项目', NULL, '人.月', '51', '2026-04-17', NULL);
INSERT INTO `cmc_contract_work` VALUES (1617, '1648881410631270457', '大渡河金川水电站工程测量中心劳务配合', NULL, '人.月', '82', '2026-10-31', '本项目总服务期82 个月，至本合同的各项工程全部竣工验收合格、缺陷责任期（2 年）满为止。（具体工期以项目建设单位确认为准）');
INSERT INTO `cmc_contract_work` VALUES (1618, '1648881410631270456', '阿斯布土料场、当卡料场1:1000地形图修补测', '1:1000', 'km²', '0.5', NULL, '合同签订后15日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (1619, '1648881410631270456', '阿斯布土料场、当卡料场1:1000三维地形面制作', '1:1000', '幅', '5', NULL, '合同签订后15日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (1620, '1648881410631270456', '坝区开挖竣工1:1000地形图修补测', '1:1000', 'km²', '2', NULL, '合同签订后15日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (1621, '1648881410631270456', '坝区开挖竣工区域1:1000三维地形面制作', '1:1000', '幅', '8', NULL, '合同签订后15日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (1622, '1648881410631270455', '巴拉水电站工程测量中心技术服务', NULL, '项', '1', '2026-01-15', '测量服务期限为：从2020年12月1日起至2026年1月15日，完成全部与测量及复核有关的工程验收资料编制、工程完工结算编制工作（其中，巴拉水电站最后一台机组投产发电时间暂定为2025年2月28日），并在后期按发包人的要求配合完成巴拉水电站工程完工结算审计和通过工程竣工验收为止。');
INSERT INTO `cmc_contract_work` VALUES (1623, '1648881410631270454', '雅砻江桐子林水电站2022年度大坝外部变形和近坝区滑坡稳定性监测', NULL, '项', '1', '2022-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1624, '1648881410631270454', '雅砻江桐子林水电站2023年度大坝外部变形和近坝区滑坡稳定性监测', NULL, '项', '1', '2023-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1625, '1648881410631270454', '雅砻江桐子林水电站2024年度大坝外部变形和近坝区滑坡稳定性监测', NULL, '项', '1', '2024-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1626, '1648881410631270454', '雅砻江桐子林水电站2025年度大坝外部变形和近坝区滑坡稳定性监测', NULL, '项', '1', '2025-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1627, '1648881410631270454', '雅砻江桐子林水电站2026年度大坝外部变形和近坝区滑坡稳定性监测', NULL, '项', '1', '2026-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1628, '1648881410631270447', '道孚抽水蓄能电站上水库1:1000三维地形面', '1:1000', 'km²', '2.04', NULL, '补充协议签订后15日历天内完工');
INSERT INTO `cmc_contract_work` VALUES (1629, '1648881410631270447', '道孚抽水蓄能电站下水库1:1000三维地形面', '1:1000', 'km²', '1.11', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1630, '1648881410631270447', '道孚抽水蓄能电站下水库备用料场地1:1000三维地形面', '1:1000', 'km²', '0.45', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1631, '1648881410631270447', '道孚抽水蓄能电站上水库渣场1:1000三维地形面', '1:1000', 'km²', '0.89', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1632, '1648881410631270447', '道孚抽水蓄能电站下水库桑其柯石岸冲沟1:1000三维地形面', '1:1000', 'km²', '0.96', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1633, '1648881410631270447', '道孚抽水蓄能电站下水库1#渣场1:1000三维地形面', '1:1000', 'km²', '1.91', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1634, '1648881410631270447', '道孚抽水蓄能电站桑其柯与盘龙沟汇口1:2000三维地形面', '1:1000', 'km²', '0.32', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1635, '1648881410631270447', '道孚抽水蓄能电站上水库施工工厂设施1:2000三维地形面', '1:1000', 'km²', '0.49', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1636, '1648881410631270447', '道孚抽水蓄能电站沿盘龙沟汇口以上1.8km至3km施工临建范围1:2000三维地形面', '1:1000', 'km²', '0.44', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1637, '1648881410631270447', '道孚抽水蓄能电站施工总布置范围1:2000三维地形面', '1:1000', 'km²', '7.75', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1638, '1648881410631270447', '道孚抽水蓄能电站沿桑其柯对外交通范围1:2000三维地形面', '1:1000', 'km²', '3.40', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1639, '1648881410631270447', '道孚抽水蓄能电站沿庆大河对外交通范围1:2000三维地形面', '1:1000', 'km²', '8.08', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1640, '1648881410631270447', '道孚抽水蓄能电站工程区全范围（不含1-12部分）1:2000三维地形面', '1:1000', 'km²', '14.23', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1641, '1648881410631270441', '色达抽水蓄能电站工程区1:5000地形图', '1:5000', 'km²', '11.6', NULL, '补充协议签订后15日历天内完工');
INSERT INTO `cmc_contract_work` VALUES (1642, '1648881410631270433', '梭磨河松岗电站闸址、厂房及尾水等1：1000水下地形图测绘（预估）', '1:1000', 'km²', '0.20', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1643, '1648881410631270433', '梭磨河热足电站闸址1：1000水下地形图测绘', '1:1000', 'km²', '0.45', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1644, '1648881410631270433', '梭磨河松岗电站闸址、厂房及尾水及梭磨河热足电站闸址1：1000地形图测绘（预估）', '1:1000', 'km²', '0.1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1645, '1648881410631270433', '梭磨河松岗电站闸址、厂房及尾水等1：1000正射影像图', '1:1000', 'km²', '0.3', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1646, '1648881410631270433', '梭磨河热足电站闸址1：1000正射影像图', '1:1000', 'km²', '0.45', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1647, '1648881410631270429', '界桩测设', NULL, NULL, NULL, NULL, '界桩测设工期自甲方明确工作范围后 50 日历天，如因其他客观原因需延长时间的，由双方协商确定；地形地类图测绘自合同签订后15 日历天。');
INSERT INTO `cmc_contract_work` VALUES (1648, '1648881410631270429', '集镇居民小区、居民点1:500（包括水下地形）地形地类图', '1:500', 'km²', '0.47', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1649, '1648881410631270429', '公墓1:1000地形地类图', '1:1000', 'km²', '0.22', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1650, '1648881410631270429', '道路1:500地形地类图', '1:500', 'km²', '0.74', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1651, '1648881410631270428', '工程区1:1000地形图测绘', '1:1000', 'km²', '24.00', NULL, '合同生效后30日内提交最终成果资料。');
INSERT INTO `cmc_contract_work` VALUES (1652, '1648881410631270428', '工程区1:2000地形图测绘', '1:2000', 'km²', '29.60', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1653, '1648881410631270428', '工程区1:1000三维地形面', '1:1000', 'km²', '24.00', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1654, '1648881410631270428', '工程区1:2000三维地形面', '1:2000', 'km²', '29.60', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1655, '1648881410631270428', '工程区1:1000数字正射影像图', '1:1000', 'km²', '24.00', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1656, '1648881410631270428', '工程区1:2000数字正射影像图', '1:2000', 'km²', '29.60', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1657, '1648881410631270428', '三等GNSS测量', '三等', '点', '6', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1658, '1648881410631270428', '四等高程测量', '四等', 'km', '33', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1659, '1648881410631270428', '五等GNSS测量', '五等', '点', '6', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1660, '1648881410631270422', '2022年度观音岩水电站变形监测控制网复测及坝前淤积和坝后冲刷测量', NULL, '项', '1', NULL, '2022年度计划开工日期2022年10月20日，具体以开工令为准；计划工期90天。');
INSERT INTO `cmc_contract_work` VALUES (1661, '1648881410631270422', '2023年度观音岩水电站变形监测控制网复测及坝前淤积和坝后冲刷测量', NULL, '项', '1', NULL, '2023年度计划开工日期2023年10月20日，具体以开工令为准；计划工期90天。');
INSERT INTO `cmc_contract_work` VALUES (1662, '1648881410631270421', ' 土建工程', NULL, '项', '1', NULL, '2023年5月1日至2025年9月30日。其中2023年5月1日至2023年9月30日为工程建设期，2023年10月1日至2025年9月30日为运行维护期；2023年10月15日前提交本底测量成果及报告。');
INSERT INTO `cmc_contract_work` VALUES (1663, '1648881410631270421', '本底测量工程', NULL, '项', '1', NULL, '详见合同第21页至第29页 描述');
INSERT INTO `cmc_contract_work` VALUES (1664, '1648881410631270421', ' 水位站建设', NULL, '项', '1', NULL, '详见合同第21页至第29页 描述');
INSERT INTO `cmc_contract_work` VALUES (1665, '1648881410631270421', ' 承包人为完成本合同所需的其他工程项目和工作内容', NULL, '项', '1', NULL, '详见合同第21页至第29页 描述');
INSERT INTO `cmc_contract_work` VALUES (1666, '1648881410631270420', '本项目服务期为自合同签订生效之日起至玛尔挡水电站运行后3年，其中现场服务时间为2023年12月1日～2027年12月31日。', NULL, NULL, NULL, NULL, '详见合同第六章 技术条款');
INSERT INTO `cmc_contract_work` VALUES (1667, '1648881410631270420', '工程现场全面摸底调查', NULL, NULL, NULL, '2027-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1668, '1648881410631270420', '仪器和设备', NULL, NULL, NULL, '2027-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1669, '1648881410631270420', '库区水温观测技术服务', NULL, NULL, NULL, '2027-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1670, '1648881410631270419', '1.土壤性状普查。', NULL, '项', '1', NULL, '3.1 2023年，构建土壤三普组织体系，组建工作队伍，制定整体工作推进计划，落实普查工作经费，完成我县耕地、园地、林草地等农用地普查任务，做好县级技术培训指导和质量控制工作。3.2 2024年，完成工作总结、县级自验、内业数据审核分析与数据汇交工作，完善成果数据汇交和报告编写编制工作。 3.3 2025年，全面完成普查成果汇总、验收和汇交工作。');
INSERT INTO `cmc_contract_work` VALUES (1671, '1648881410631270419', '2.土壤类型普查。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1672, '1648881410631270419', '3.土壤立地条件普查。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1673, '1648881410631270419', '4.土壤利用情况普查。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1674, '1648881410631270419', '5.土壤数据库构建。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1675, '1648881410631270419', '6.土壤质量状况分析。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1676, '1648881410631270419', '7.普查成果汇交汇总。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1677, '1648881410631270418', '（1）仪器设备供货', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1678, '1648881410631270418', '1）测斜管（含配套接头、孔口及孔底保护盖等）的供货、运输及装卸、设备检验、验收、保管；', NULL, NULL, NULL, NULL, '（1）土建施工、设备安装：自合同签订之日起270天内完成测斜孔钻孔、测斜管安装及回填灌浆、配套设施施工等全部工作。');
INSERT INTO `cmc_contract_work` VALUES (1679, '1648881410631270418', '2）活动式测斜仪的供货、运输及装卸、设备检验、验收、保管。', NULL, NULL, NULL, NULL, '（2）试运行：土建施工及设备安装完成，并取得基准值后试运行1个月。');
INSERT INTO `cmc_contract_work` VALUES (1680, '1648881410631270418', '（2）土建施工、设备安装及试运行', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1681, '1648881410631270418', '1）测斜孔钻孔；', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1682, '1648881410631270418', '2）测斜管安装及回填灌浆；', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1683, '1648881410631270418', '3）孔口保护装置等配套设施施工。', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1684, '1648881410631270418', '4）测斜孔试运行。', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1685, '1648881410631270418', '（3）为完成上述工作的各类非永久工程。', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1686, '1648881410631270412', '工作内容包括边坡监测、深基坑水平位移监测、深基坑竖向位移监测、周边位移（水平净空收敛）监测、地表下沉监测、墙（坡）顶水平位移监测、墙（坡）顶垂直位移监测、拱顶下沉、变形点监测等。', NULL, '项', '1', NULL, '服务期限：按甲方提供的方案执行。监测期限和频率按甲方提供的方案执行。');
INSERT INTO `cmc_contract_work` VALUES (1687, '1648881410631270407', '1）监测仪器设备采购与安装', NULL, '项', '1', NULL, '详见合同P99');
INSERT INTO `cmc_contract_work` VALUES (1688, '1648881410631270407', '（1）变形监测控制网', NULL, '项', '1', NULL, '工作内容包括监测仪器设备及材料的采购、运输、装卸、验收、保管、检验、率定、埋设、安装、调试、维护等工作，水平和垂直位移控制网监测自动化系统组网，监测管理及软件系统的开发与安装调试、试运行、维护等所有项目。');
INSERT INTO `cmc_contract_work` VALUES (1689, '1648881410631270407', '（2）大坝及边坡监测仪器设备完善', NULL, '项', '1', NULL, '工作内容包括外观智能测站自动化系统、外部变形测点保护罩、边坡测斜自动化改造、观测房电源、通讯恢复、左右岸边坡仪器恢复、大坝阻尼器监测系统恢复、大坝内观自动化系统、坝顶监测中心站线缆恢复规整、三维激光扫描仪等监测仪器设备的采购、运输、装卸、验收、保管、检验、率定、埋设、安装、调试、维护等工作。');
INSERT INTO `cmc_contract_work` VALUES (1690, '1648881410631270407', '2）监测相关的土建工程', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1691, '1648881410631270407', '（1）水平位移控制网土建工作内容包括 GNSS 基准站保护房、GNSS 基准站观测墩、倒垂线观测墩、倒垂钻孔、设施拆除及基础清理等工作。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1692, '1648881410631270407', '（2）垂直位移控制网内容包括水准标芯埋设、双金属标埋设、双金属标钻孔、电源电缆牵引、光纤敷设、防雷接地等安装工作。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1693, '1648881410631270407', '（3）抗剪洞观测房重建。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1694, '1648881410631270407', '（4）左右岸边坡需恢复的监测仪器部位喷层混凝土挖除、回填。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1695, '1648881410631270407', '3）合同期观测及监测资料整编分析', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1696, '1648881410631270407', '（1）变形监测控制网的观测。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1697, '1648881410631270407', '（2）所有监测仪器合同期观测及资料整编及分析。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1698, '1648881410631270407', '（3）工程范围内的巡视检查工作。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1699, '1648881410631270407', '（4）所有设备的日常维护。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1700, '1648881410631270407', '（5）编制监测年报、月报及专项报告。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1701, '1648881410631270406', '1:500地形图测绘', '1:500', '项', '1', NULL, '本协议服务期限自本协议签订之日起，至简阳地形图测量项目通过甲方及业主方的评审合格。');
INSERT INTO `cmc_contract_work` VALUES (1702, '1648881410631270406', '四等GNSS测量', '四等', '点', '5', NULL, '本协议服务期限自本协议签订之日起，至简阳地形图测量项目通过甲方及业主方的评审合格。');
INSERT INTO `cmc_contract_work` VALUES (1703, '1648881410631270406', '特征点放样', NULL, '点', '5', NULL, '本协议服务期限自本协议签订之日起，至简阳地形图测量项目通过甲方及业主方的评审合格。');
INSERT INTO `cmc_contract_work` VALUES (1704, '1648881410631270406', '土方平衡报告', NULL, '项', '1', NULL, '本协议服务期限自本协议签订之日起，至简阳地形图测量项目通过甲方及业主方的评审合格。');
INSERT INTO `cmc_contract_work` VALUES (1705, '1648881410631270405', 'Z1～Z2镇墩间钢管位移监测', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_contract_work` VALUES (1706, '1648881410631270405', '压力钢管伸缩节变形监测', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_contract_work` VALUES (1707, '1648881410631270405', 'Z13镇墩基础及周边边坡稳定监测', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_contract_work` VALUES (1708, '1648881410631270405', '水工检查', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_contract_work` VALUES (1709, '1648881410631270405', '羊湖压力钢管资料整编分析', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_contract_work` VALUES (1710, '1648881410631270405', '沉降、水平位移测量', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_contract_work` VALUES (1711, '1648881410631270405', '引水隧洞洞身等情况，伸缩缝开合和止水情况', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_contract_work` VALUES (1712, '1648881410631270405', '资料整编分析', NULL, '项', '1', NULL, '合同签订之日至技术服务内容完成');
INSERT INTO `cmc_contract_work` VALUES (1713, '1648881410631270402', '泥沙监测断面测量', NULL, '项', '1', '2023-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1714, '1648881410631270402', '泥沙监测断面设施检查、修复、基准点校核', NULL, '项', '1', '2023-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1715, '1648881410631270402', '水尺检查、校核和修复', NULL, '项', '1', '2023-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1716, '1648881410631270402', '测量资料整编', NULL, '项', '1', '2023-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1717, '1648881410631270402', '水库泥沙淤积、下游河道冲刷及水位分析，库容分析，水库调度运行方式建议', NULL, '项', '1', '2023-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1718, '1648881410631270402', '泥沙监测专题分析报告编制', NULL, '项', '1', '2023-05-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1719, '1648881410631270402', '乙方的工作内容包括（但不限于）以上内容，详见本项目附件3技术规范书。', NULL, NULL, NULL, NULL, '详见合同文档附件3');
INSERT INTO `cmc_contract_work` VALUES (1720, '1648881410623897347', '利用现有地下管线普查数据成果，在普查更新范围内采用全野外探测及内外业结合核实探测的方式摸清地下管线类型、管线属性等基本情况，收集地下管线隐患信息资料并入库。', NULL, 'km', '2300', '2022-10-31', '预估工作量：全野外探测(1042公里)，内外业结合核实探测(1256公里)。');
INSERT INTO `cmc_contract_work` VALUES (1721, '1648881410623897347', '乙方完成地下管线普查成果更新工作，并经监理检查合格后，管线成果可分批提交管线权属单位进行成果核验', NULL, '项', '1', '2021-12-01', NULL);
INSERT INTO `cmc_contract_work` VALUES (1722, '1648881410623897347', '乙方全力配合管线权属单位对提交的地下管线普查更新成果进行核验，并对核验过程中的相关问题进行整改', NULL, '项', '1', '2022-04-01', NULL);
INSERT INTO `cmc_contract_work` VALUES (1723, '1648881410623897347', '乙方全力配合甲方组织的测绘成果质检机构对普查更新成果进行质量检验，并对质检过程中的相关问题进行整改', NULL, '项', '1', '2022-06-01', NULL);
INSERT INTO `cmc_contract_work` VALUES (1724, '1648881410623897347', '乙方全力配合甲方对地下管线普查成果进行汇交、数据整合检查及数据入库工作', NULL, '项', '1', '2022-10-01', NULL);
INSERT INTO `cmc_contract_work` VALUES (1725, '1648881410622133006', '横五支路北段道路排水管道内窥试验检测 服务', NULL, '项', '1', NULL, '本工程新建雨污排水管道共计约2050米，具体检测长度以结算工程量为准。检测服务期为：项目开工至竣工验收前。');
INSERT INTO `cmc_contract_work` VALUES (1726, '1648881410615368699', '佛山市南海区不动产登记宗地红线数据整理入库。', NULL, '项', '1', '2021-12-31', '包括但不限于按佛山市不动产登记系统数据规范、生产规程要求，对测绘单位提交的宗地红线进行审核、入库。');
INSERT INTO `cmc_contract_work` VALUES (1727, '1648881410614180504', '三台县柳溪河等8条河流河道管理范围划定服务', NULL, '项', '1', '2020-11-15', '详细工作内容见第三条服务内容与质量标准');
INSERT INTO `cmc_contract_work` VALUES (1728, '1648881410609832235', '简阳市东溪街道星光社区砂石资源储量服务项目', NULL, '项', '1', NULL, '开工日期：签订合同后2日内进场开展工作。');
INSERT INTO `cmc_contract_work` VALUES (1729, '1648881410597910958', '都江堰市地下管线普查成果更新项目（包2）工程监理', NULL, '项', '1', NULL, '工程监理包括合同履行监理、工程进度监理、工程准备监理、普查质量监理、数据监理和普查成果资料监理，同时对施工过程的作业安全和资料保密进行监督，并对地下管线普查工程质量进行评价。工期：乙方自签订合同之日起至地下管线普查成果更新项目完成验收。');
INSERT INTO `cmc_contract_work` VALUES (1730, '1648881410584981902', '二等跨河水准测量', '二等', '处', NULL, NULL, '以上价格包含乙方投入高精度徕卡全站仪1台，2名技术员参与现场水准测量，内业计算及成果整编费用。项目所需其他工作人员、测量仪器设备、车辆、现场食宿及交通费用等均由甲方提承担。');
INSERT INTO `cmc_contract_work` VALUES (1731, '1648881410583829702', '（1）实地进行宗地测量和房屋测量', NULL, NULL, NULL, NULL, '详见合同第3页第三条  工作内容');
INSERT INTO `cmc_contract_work` VALUES (1732, '1648881410583829702', '（2）完成权籍调查', NULL, NULL, NULL, NULL, '详见合同第3页第三条  工作内容');
INSERT INTO `cmc_contract_work` VALUES (1733, '1648881410583829702', '（3）成果公示', NULL, NULL, NULL, NULL, '详见合同第3页第三条  工作内容');
INSERT INTO `cmc_contract_work` VALUES (1734, '1648881410583829702', '（4）数据库建设', NULL, NULL, NULL, NULL, '详见合同第4页第三条  工作内容');
INSERT INTO `cmc_contract_work` VALUES (1735, '1648881410583829702', '（5）组织登记受理', NULL, NULL, NULL, NULL, '详见合同第4页第三条  工作内容');
INSERT INTO `cmc_contract_work` VALUES (1736, '1648881410583829702', '（6）质量检查 ', NULL, NULL, NULL, NULL, '详见合同第5页第三条  工作内容');
INSERT INTO `cmc_contract_work` VALUES (1737, '1648881410583829702', '（7）资料整体移交', NULL, NULL, NULL, NULL, '详见合同第5页第三条  工作内容');
INSERT INTO `cmc_contract_work` VALUES (1738, '1648881410583116216', '1:1000地形图测绘', '1:1000', 'km²', '2.6', '2020-11-13', NULL);
INSERT INTO `cmc_contract_work` VALUES (1739, '1648881410582765611', '使用甲方提供的遥感影像、遥感监测成果、2020年度基础库、举证照片等数据资料，对任务区域内所有县级调查区域的2021年度国土变更调查成果开展全面国家级内业核查和互联网+在线核查。', NULL, '项', '1', '2022-12-31', '详细内容请看合同第一条“项目内容”。');
INSERT INTO `cmc_contract_work` VALUES (1740, '1648881410578684211', '天然气管道及配套设施、地形测绘及规划定桩测量。', NULL, '项', '1', '2022-11-16', '乙方应依据测绘技术规范及甲方指定范围及要求，对甲方指定区域进行测量，测量成果应提交甲方检查验收。');
INSERT INTO `cmc_contract_work` VALUES (1741, '1648881410574457575', 'Z1～Z2 镇墩间钢管位移监测', NULL, '项', '1', NULL, '合同签订之日至 2024 年 12 月 31 日');
INSERT INTO `cmc_contract_work` VALUES (1742, '1648881410574457575', '压力钢管伸缩节变形监测', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1743, '1648881410574457575', 'Z13 镇墩基础及周边边坡稳定监测', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1744, '1648881410574457575', '水工检查', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1745, '1648881410574457575', '羊湖压力钢管资料整编分析', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1746, '1648881410574457575', '沉降、水平位移测量', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1747, '1648881410574457575', '引水隧洞洞身等情况，伸缩缝开合和止水情况', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1748, '1648881410574457575', '水工检查', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1749, '1648881410574457575', '资料整编分析', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1750, '1648881410572550145', '鱼道工程渣场1:1000地形图测绘', '1:1000', 'km²', '0.70', '2022-07-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (1751, '1648881410572550145', '五等GNSS测量', '五等', '点', '4.00', '2022-07-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (1752, '1648881410571252124', '前期准备工作完成基础资料收集、转换、方案编制、控制点选择、工作底图制作等工作。', NULL, '项', '1', NULL, '2020年12月20日前全面完成剑阁县农村房地一体和集体建设用地确权登记项目（第四标段）的外业测绘、权籍调查和资料收集、确权登记、权籍数据库建设、数据汇交。');
INSERT INTO `cmc_contract_work` VALUES (1753, '1648881410571252124', '开展不动产权籍调查', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1754, '1648881410571252124', '成果公示', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1755, '1648881410571252124', '数据库建设', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1756, '1648881410571252124', '组织登记受理', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1757, '1648881410571252124', '质量检查', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1758, '1648881410571252124', '资料整理移交', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1759, '1648881410570164873', '南海区桂澜路北延线工程一期（里水段）项目测量工程进行地籍及房产测绘、建、（构）筑物测绘', NULL, '项', '1', NULL, '单价合同，委托服务期间自 2021年 5 月 至本项目完成止。');
INSERT INTO `cmc_contract_work` VALUES (1760, '1648881410568803046', '南水水库环境保护工程三期（生态边坡治理）竣工图编制及工程量复核', NULL, '项', '1', NULL, '乙方对项目区内13处边坡治理工程进行现场实地测绘并出具竣工图，对施工单位上报的完成工程量进行实地复核并出具复核报告，对复核数据负责，提交甲方检查验收。');
INSERT INTO `cmc_contract_work` VALUES (1761, '1648881410565090039', '1、芳地坪风电场:(1）风电场4台风机，1台风机4个观测点，风机部分共16个观测点;(2）升压站架构区7个，站内房屋墙沉降观测点4个及周边区域沉降观测点12个，共23个。(3）升压站#1、2#挡墙垂直与水平观测点24个。', NULL, '项', '1', NULL, '详见合同第三条“乙方承担的主要工作及责任”');
INSERT INTO `cmc_contract_work` VALUES (1762, '1648881410565090039', '凉水泉风电场:风电场18台风机，1台风机4个观测点，共72个。', NULL, '项', '1', NULL, '详见合同第三条“乙方承担的主要工作及责任”');
INSERT INTO `cmc_contract_work` VALUES (1763, '1648881410565090039', '望江坪风电场:风电场25台风机，1台风机4个观测点，共100个。', NULL, '项', '1', NULL, '详见合同第三条“乙方承担的主要工作及责任”');
INSERT INTO `cmc_contract_work` VALUES (1764, '1648881410565090039', '凉山海口风电场：(1）海口风电场25台风机，1台风机4个观测点，1台风机3基准点，风机部分共100个观测点;(2）升压站内房屋墙沉降观测点及周边区域沉降观测点，共20个。(3）风电机组水平度检测:25台(4）风电机组垂直度检测:25台(5）检测频次:1次/全年。', NULL, '项', '1', NULL, '详见合同第三条“乙方承担的主要工作及责任”');
INSERT INTO `cmc_contract_work` VALUES (1765, '1648881410565090039', '凉山赛果乐风电场：赛果乐风电场133台风机，1台风机4个观测点，1台风机3基准点，风机部分共532个观测点。(1）升压站内房屋墙沉降观测点个及周边区域沉降观测点，共50个。(2）风电机组水平度检测:133台(3）风电机组垂直度检测:133台(4）检测频次:2次/全年。', NULL, '项', '1', NULL, '详见合同第三条“乙方承担的主要工作及责任”');
INSERT INTO `cmc_contract_work` VALUES (1766, '1648881410565090039', '凉山甘天地二期风电场：(1）风电场36 台风机，1台风机4个观测点，1台风机3基准点，风机部分共144个观测点。(2）风电机组水平度检测:36台(3）风电机组垂直度检测:36台(4）检测频次:2次/全年。', NULL, '项', '1', NULL, '详见合同第三条“乙方承担的主要工作及责任”');
INSERT INTO `cmc_contract_work` VALUES (1767, '1648881410565090039', '乙方按要求进行范围内资料规范性整理及沉降观测报告等相关成果一式四份提交甲方。', NULL, '项', '1', NULL, '详见合同第三条“乙方承担的主要工作及责任”');
INSERT INTO `cmc_contract_work` VALUES (1768, '1648881410563023365', '成彭快速路（彭州市段）工程先期启动段航测', NULL, 'km²', '6.3', NULL, '包括外业无人机航飞工作，内业整理提供该段正射影像图、内业整理提供该段地形图（地形图出图比例尺为1：1000，且针对拟建服务区按1：500的比例尺出地形图）、正射影像图及三维实景模型。合同签订之后14日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1769, '1648881410561284288', '普巴绒集镇垃圾填埋场1:500地形地类图测绘', '1:500', 'km²', '0.1', NULL, '合同工期为合同签订后7日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1770, '1648881410561284288', '普巴绒集镇垃圾填埋场扎德桥1:500地形图测绘', '1:500', 'km²', '0.25', NULL, '合同工期为合同签订后7日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1771, '1648881410560078279', '华能大连市庄河海上风电场址Ⅳ1（350MW）项目施工海域的扫海测量', NULL, 'km²', '49.15', NULL, '履约期限：自开工之日至本工程竣工为止，具体施工时间以甲方通知的为准，乙方必须严格按照甲方的要求及时组织施工。');
INSERT INTO `cmc_contract_work` VALUES (1772, '1648881410560078279', '51台单桩基础沉桩后桩周围30m半径范围内扫海测量', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1773, '1648881410560078279', '抛石后10台（暂定）单桩基础桩周围30m半径范围内扫海测量', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1774, '1648881410559741274', '四等GNSS测量', '四等', '点', '6', '2021-02-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1775, '1648881410559741274', '三等三角高程测量', '三等', 'km', '13', '2021-02-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1776, '1648881410559741274', '木灰坝址1:1000地形图测绘', '1:1000', 'km²', '2', '2021-02-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1777, '1648881410559741274', '木灰沟施工临时场地1:2000地形图测绘', '1:2000', 'km²', '2.5', '2021-02-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1778, '1648881410556314675', '三等GPS测量', '三等', '点', '20', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1779, '1648881410556314675', '五等导线测量（代替四等三角高程）', '四等', 'km', '100', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1780, '1648881410556314675', '尧拉梯级闸址-引水-厂址1：10000地形图测绘', '1:10000', 'km²', '38', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1781, '1648881410556314675', '金霞梯级库区-闸址-引水-厂址1：5000地形图测绘', '1:5000', 'km²', '5', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1782, '1648881410556314675', '紫霞梯级坝址1：2000地形图测绘', '1:2000', 'km²', '1.2', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1783, '1648881410556314675', '紫霞梯级厂址1：2000地形图测绘', '1:2000', 'km²', '1', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1784, '1648881410556314675', '紫霞梯级引水1：5000地形图测绘', '1:5000', 'km²', '51', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1785, '1648881410556314675', '紫霞梯级库区1：5000地形图测绘', '1:5000', 'km²', '22.5', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1786, '1648881410556314675', '玉霞梯级闸址1：2000地形图测绘', '1:2000', 'km²', '1', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1787, '1648881410556314675', '玉霞梯级厂址1：2000地形图测绘', '1:2000', 'km²', '1.5', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1788, '1648881410556314675', '各梯级坝坝厂、址址工程区1：2000地形图水下测绘', '1:2000', 'km²', '1', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1789, '1648881410556314675', '朗杰贡村~汇入易贡臧布河口1：10000纵断面测量', '1:10000', 'km', '72', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1790, '1648881410556314675', '加贡乡政府~汇口1：100000纵断面测量', '1:100000', 'km', '25', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1791, '1648881410556314675', '金霞厂址上游1km~汇口1：10000纵断面测量', '1:10000', 'km', '6', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1792, '1648881410556314675', '紫霞梯级1：500大断面测量', '1:500', 'km', '6', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1793, '1648881410556314675', '紫霞梯级1：2000水面线测量', '1:2000', 'km', '3', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1794, '1648881410556314675', '紫霞梯级断面基点测量', NULL, '点', '8', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1795, '1648881410556314675', '玉霞梯级1：500大断面测量', '1:500', 'km', '0.6', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1796, '1648881410556314675', '玉霞梯级1：2000水面线测量', '1:2000', 'km', '3', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1797, '1648881410556314675', '玉霞梯级断面基点测量', NULL, '点', '6', NULL, '合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (1798, '1648881410554677623', '邻水县农村土地承包确权登记航空摄影技术服务项目DOM成果坐标转换', NULL, '项', '1', NULL, '（由高斯-克吕格1.5度分带转换为高斯-克吕格3度分带）,所有成果交付时间为合同签订日后20日历天。');
INSERT INTO `cmc_contract_work` VALUES (1799, '1648881410552881088', '1:1000地形地类图测量', '1:1000', 'km²', '0.39', '2021-01-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1800, '1648881410552881088', '芦稿溪、兴隆沟、马边河河道1:1000大断面', '1:1000', 'km', '7', '2021-01-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1801, '1648881410552881088', '马边县城鹰岩佬大桥以下至下溪乡测量范围内的涉水建筑物（拦河景观堰、桥梁）高程', NULL, '点', '100', '2021-01-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1802, '1648881410552881088', '购买测量范围内1:10000数字矢量地形图', '1:10000', '幅', '4', '2021-01-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1803, '1648881410549017736', '广东台山黄茅岗抽水蓄能电站工程区地形图1:5000（按1:1000精度航飞）', '1:5000', 'km²', '30.23', NULL, '（1）合同签订日期第二日起算，15日历天内完成外业工作；（2）最终成果报告：合同签订后30日历天内完成并提交最终成果报告。');
INSERT INTO `cmc_contract_work` VALUES (1804, '1648881410549017736', '广东台山黄茅岗抽水蓄能电站工程区1:5000正射影像', '1:5000', 'km²', '30.23', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1805, '1648881410549017736', '广东台山黄茅岗抽水蓄能电站工程区1:5000三维地形面', '1:5000', 'km²', '30.23', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1806, '1648881410549017736', '五等GNSS测量', '五等', '点', '6', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1807, '1648881410548586173', '两江新区龙兴园区探测管线', NULL, 'km²', '115.639 ', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1808, '1648881410548586173', '两江新区鱼复园区探测管线', NULL, 'km²', '81.727', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1809, '1648881410545293791', '始兴县石人嶂莲花山重大安全隐患整治及道路扩征项目1：1000地形图测绘', '1:1000', 'm²', '946,290.05', '2021-12-31', '红线范围内');
INSERT INTO `cmc_contract_work` VALUES (1810, '1648881410545293791', '始兴县石人嶂莲花山重大安全隐患整治及道路扩征项目1：1000地形图测绘', '1:1000', 'm²', '797,159.21', '2021-12-31', '红线范围外');
INSERT INTO `cmc_contract_work` VALUES (1811, '1648881410542685455', '公路测量（放桩）', NULL, 'km', '54.00', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1812, '1648881410540841551', '前期准备工作完成基础资料收集、转换、方案编制、控制点选择、工作底图制作等工作。', NULL, '项', '1', NULL, '2020年12月底全面完成剑阁县农村房地一体和集体建设用地确权登记项目（第四标段）的外业测绘、权籍调查和资料收集、确权登记、权籍数据库建设、数据汇交。');
INSERT INTO `cmc_contract_work` VALUES (1813, '1648881410540841551', '开展不动产权籍调查', NULL, '项', '1', NULL, '2020年12月底全面完成剑阁县农村房地一体和集体建设用地确权登记项目（第四标段）的外业测绘、权籍调查和资料收集、确权登记、权籍数据库建设、数据汇交。');
INSERT INTO `cmc_contract_work` VALUES (1814, '1648881410540841551', '成果公示', NULL, '项', '1', NULL, '2020年12月底全面完成剑阁县农村房地一体和集体建设用地确权登记项目（第四标段）的外业测绘、权籍调查和资料收集、确权登记、权籍数据库建设、数据汇交。');
INSERT INTO `cmc_contract_work` VALUES (1815, '1648881410540841551', '数据库建设', NULL, '项', '1', NULL, '2020年12月底全面完成剑阁县农村房地一体和集体建设用地确权登记项目（第四标段）的外业测绘、权籍调查和资料收集、确权登记、权籍数据库建设、数据汇交。');
INSERT INTO `cmc_contract_work` VALUES (1816, '1648881410540841551', '组织登记受理', NULL, '项', '1', NULL, '2020年12月底全面完成剑阁县农村房地一体和集体建设用地确权登记项目（第四标段）的外业测绘、权籍调查和资料收集、确权登记、权籍数据库建设、数据汇交。');
INSERT INTO `cmc_contract_work` VALUES (1817, '1648881410540841551', '质量检查', NULL, '项', '1', NULL, '2020年12月底全面完成剑阁县农村房地一体和集体建设用地确权登记项目（第四标段）的外业测绘、权籍调查和资料收集、确权登记、权籍数据库建设、数据汇交。');
INSERT INTO `cmc_contract_work` VALUES (1818, '1648881410540841551', '资料整理移交', NULL, '项', '1', NULL, '2020年12月底全面完成剑阁县农村房地一体和集体建设用地确权登记项目（第四标段）的外业测绘、权籍调查和资料收集、确权登记、权籍数据库建设、数据汇交。');
INSERT INTO `cmc_contract_work` VALUES (1819, '1648881410537398469', '四川岷江汉阳电站大坝外部变形监测（2020.3～2021.2定期观测和基准网基准值复测）', NULL, NULL, NULL, '2021-02-28', '1年，2020年3月1日起至2021年2月28日止。');
INSERT INTO `cmc_contract_work` VALUES (1820, '1648881410537398469', '依据湖南省水利水电勘测设计研究总院设计的《汉阳电航枢纽工程安全监测平面布置技施设计图》，补充完成2019年9月至2020年2月的监测成果资料；完成2020年3月起至2021年2月汉阳电站大坝外部形变监测1年12次监测成果资料；其中每隔1月进行1次现场定期监测工作，未到现场那月提交内业监测成果资料;基准网复测分别于2020年2月复测一次；2021年2月28日前提交该委托周期年内的《安全监测年度分析报告》。', NULL, NULL, NULL, '2021-02-28', NULL);
INSERT INTO `cmc_contract_work` VALUES (1821, '1648881410534333954', '四等控制测量20点', '四等', '点', '20', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1822, '1648881410532316813', '取水口水准工作基点埋设安装、联测取 水口、尾水二等水准外业联测、水准测量数据内业处理、羊湖电站镇 墩、支墩安全监测工程基准控制网复测及分析、羊湖电站镇墩、支墩 安全监测工程变形监测网及精密水准控制网的测量、计算、复测及资 料整编分析等工作内容、羊湖电站镇墩、支墩、钢管安全监测工程及', NULL, '项', '1', '2024-12-30', '取水口水准工作基点埋设安装、联测取水口、尾水二等水准外业联测、水准测量数据内业处理、羊湖电站镇墩、支墩安全监测工程基准控制网复测及分析、羊湖电站镇墩、支墩安全监测工程变形监测网及精密水准控制网的测量、计算、复测及资 料整编分析等工作内容、羊湖电站镇墩、支墩、钢管安全监测工程及边坡外观安全监测工程观测及资料整编、分析等工作内容。');
INSERT INTO `cmc_contract_work` VALUES (1823, '1648881410514703427', '获取红原县境内规模以下48条河流现有基础测绘数据', NULL, '项', '1', '2021-05-31', '2021年3月31日前完成入库；2021年5月31日前提交成果并完成业主验收。');
INSERT INTO `cmc_contract_work` VALUES (1824, '1648881410514703427', '收集红原县境内规模以下48条河流的水文资料，确定河流洪水水面线。', NULL, '项', '1', '2021-05-31', '2021年3月31日前完成入库；2021年5月31日前提交成果并完成业主验收。');
INSERT INTO `cmc_contract_work` VALUES (1825, '1648881410514703427', '确定河流河道管理范围，绘制管理范围线。', NULL, '项', '1', '2021-05-31', '2021年3月31日前完成入库；2021年5月31日前提交成果并完成业主验收。');
INSERT INTO `cmc_contract_work` VALUES (1826, '1648881410514703427', '河流河道管理线电子桩牌及告示牌设置方案。', NULL, '项', '1', '2021-05-31', '2021年3月31日前完成入库；2021年5月31日前提交成果并完成业主验收。');
INSERT INTO `cmc_contract_work` VALUES (1827, '1648881410514703427', '建立河流划界信息数据库', NULL, '项', '1', '2021-05-31', '2021年3月31日前完成入库；2021年5月31日前提交成果并完成业主验收。');
INSERT INTO `cmc_contract_work` VALUES (1828, '1648881410510061219', '乙方在2022年6月1日至2023年5月31日期间承接甲方指派的监测项目技术服务工作；具体工作内容、工作量及工期等甲方在单项工程合同中明确。', NULL, NULL, NULL, '2023-05-31', '乙方应科学组织生产，确保按甲乙双方签订的单项工程合同规定的工期内保质、保量完成提交甲方验收。');
INSERT INTO `cmc_contract_work` VALUES (1829, '1648881410507534625', '产卵场1:500地形地类图测绘', '1:500', 'km²', '0.4', NULL, '合同签订后20日历天内完成并提交最终成果报告');
INSERT INTO `cmc_contract_work` VALUES (1830, '1648881410507534625', '产卵场1:500水下地形图测绘', '1:500', 'km²', '0.4', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1831, '1648881410507534625', '五等GNSS测量', '五等', '点', '12', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1832, '1648881410507178532', '庆轨道交通2023-2026年全线网运营期变形监测(二标段)', NULL, NULL, NULL, NULL, '按甲方提供的监测方案执行。');
INSERT INTO `cmc_contract_work` VALUES (1833, '1648881410507178532', '监测期限和频率按甲方提供的方案执行，出现突发事件应无偿配合甲方开展', NULL, NULL, NULL, NULL, '详见合同第2.3技术要求。');
INSERT INTO `cmc_contract_work` VALUES (1834, '1648881410500921664', '整个用地区域面积的测量', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1835, '1648881410500921664', '权属区域面积的测算及其平面图的绘制', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1836, '1648881410500921664', '权属区域1:2000地形测量', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1837, '1648881410500921664', '编制勘测定界报告书', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1838, '1648881410498756858', '飞行区及航站区、工作区1:500 数字化地形图', '1:500', 'km²', '36.6', NULL, '预计工期为 120 日历天，以实际工期为依据，从合同生效之日起至全部地形图测量工作完成为止。');
INSERT INTO `cmc_contract_work` VALUES (1839, '1648881410498756858', '铁路区域1:500 数字化地形图测量', '1:500', 'km²', '1', NULL, '预计工期为 120 日历天，以实际工期为依据，从合同生效之日起至全部地形图测量工作完成为止。');
INSERT INTO `cmc_contract_work` VALUES (1840, '1648881410498756858', '净空区域1:1000 数字化地形图测量', '1:1000', 'km²', '30.3', NULL, '预计工期为 120 日历天，以实际工期为依据，从合同生效之日起至全部地形图测量工作完成为止。');
INSERT INTO `cmc_contract_work` VALUES (1841, '1648881410498756858', '包含各区域的空域申请、激光扫描及航空摄影、内业激光分类及数字化测图等。', NULL, '项', '1', NULL, '预计工期为 120 日历天，以实际工期为依据，从合同生效之日起至全部地形图测量工作完成为止。');
INSERT INTO `cmc_contract_work` VALUES (1842, '1648881410498151517', '勘测定界', NULL, '项', '1', NULL, '合同工期自合同签订之日起90天内。');
INSERT INTO `cmc_contract_work` VALUES (1843, '1648881410498151517', '地籍测绘', NULL, '项', '1', NULL, '合同工期自合同签订之日起90天内。');
INSERT INTO `cmc_contract_work` VALUES (1844, '1648881410498151517', '出让测绘', NULL, '项', '1', NULL, '合同工期自合同签订之日起90天内。');
INSERT INTO `cmc_contract_work` VALUES (1845, '1648881410498151517', '实测地形图', NULL, '项', '1', NULL, '合同工期自合同签订之日起90天内。');
INSERT INTO `cmc_contract_work` VALUES (1846, '1648881410497398215', '1:2000地形测量劳务辅助', '1:2000', 'km²', '33', '2020-07-30', '本合同技术配合工期2020年6月10日至2020年7月30日。');
INSERT INTO `cmc_contract_work` VALUES (1847, '1648881410497398215', '四等GPS控制点劳务辅助', '四等', '点', '20', '2020-07-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1848, '1648881410497398215', '四等水准测量劳务辅助', '四等', 'km', '84', '2020-07-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1849, '1648881410497398215', '一级GPS控制点劳务辅助', 'Ⅰ', '点', '50', '2020-07-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1850, '1648881410490192033', '据国家和四川省国土资源厅相关文件要求及建设用地报件工作有关规定，对阿坝金川220kV输变电工程变电站建设用地开展勘测定界、土地性质调整、不动产测绘工作及其资料收集整理，编制该项目勘测定界技术报告书与不动产测绘报告书，报送相关主管部门审查并通过审查验收，协助甲方在用地报批及不动产证办理工作中的资料收集整理、组卷上报等技术支撑服务保障工作，最终取得征地批复及不动产登记证。', NULL, '项', '1', NULL, '建设用地报批2022年6月30日前完成资料编制组卷上报，最终以取得批文时间为准，取得批复后编制不动产测绘报告，办理不动产登记证，最终以取得证书时间为准。');
INSERT INTO `cmc_contract_work` VALUES (1851, '1648881410489890606', '承担第  8 标段（测绘航空摄影、摄影测量与遥感）约定的相关工作和内容，并按照约定的管理模式进行工作。', NULL, '项', '1', NULL, '2023-2025年度，具体项目工期以单项合同为准');
INSERT INTO `cmc_contract_work` VALUES (1852, '1648881410486906555', '苍溪县全县行政区域范围基础测绘“十四五”规划编制', NULL, '项', '1', '2021-04-30', '详见合同第三条服务内容与质量标准。');
INSERT INTO `cmc_contract_work` VALUES (1853, '1648881410484403626', '牡玖隧道工程施工测量技术服务', NULL, '项', '1', NULL, '2021年3月1日～2022年8月31日，现场服务至 2022年12月31日');
INSERT INTO `cmc_contract_work` VALUES (1854, '1648881410484403626', '长征沟道路标准提高工程施工测量技术服务', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1855, '1648881410484403626', '桥梁库岸加固工程施工测量技术服务', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1856, '1648881410484403626', '二期蓄水后新增地质灾害点处理、绕行通道等项目施工测量技术', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1857, '1648881410482291380', '对乳县境内，广东乳源西京古道地方级沙漠自然公园等七个自然保护地进行自然资源确权登记。', NULL, '项', '1', '2022-12-31', '详见合同第四条“项目工作程序”');
INSERT INTO `cmc_contract_work` VALUES (1858, '1648881410480275457', '理塘抽水蓄能电站工程区1:10000地形图', '1:10000', 'km²', '43.24', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1859, '1648881410480275457', '理塘抽水蓄能电站工程区1:5000地形图', '1:5000', 'km²', '8.1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1860, '1648881410480275457', '五等GNSS测量（预估）', '五等', '点', '8', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1861, '1648881410480275457', '四等三角高程测量', '四等', 'km', '30', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1862, '1648881410477612473', 'ML坝址区实景三维模型制作（影像地面分辨率优于5cm）', NULL, 'km²', '143', NULL, '自合同签订次日起60日历天内完成外业工作，90日历天完成所有工作；');
INSERT INTO `cmc_contract_work` VALUES (1863, '1648881410477612473', 'ML库区电子沙盘制作（利用已有资料，影像地面分辨率优于20cm）', NULL, 'km²', '490', NULL, '自合同签订次日起60日历天完成所有工作');
INSERT INTO `cmc_contract_work` VALUES (1864, '1648881410477612473', '测绘地形（地类）图坐标转换、外部收集地形图坐标转换、控制点坐标转换（预估）', NULL, '点', '9000', NULL, '自合同签订次日起60日历天内完成外业工作，90日历天完成所有工作；');
INSERT INTO `cmc_contract_work` VALUES (1865, '1648881410473847805', '利用2021年度变更“一上”数据结合三调数据以及历年耕地数据、林地一张图数据，分析出耕地流出到非耕农用地的矢量数据，制作工作底图并下发镇村。', NULL, '项', '1', NULL, '合同签订后15日内完成全部合同约定的相关工作。');
INSERT INTO `cmc_contract_work` VALUES (1866, '1648881410473847805', '根据镇村核实反馈的实地是耕地的图斑，分割处理后上传“天府调查云举证平台”，安排外业人员实地举证。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1867, '1648881410473847805', '针对镇村反馈的有条件恢复为耕地的图斑，安排人员配合镇村实地整改，整改到位后上传“天府调查云举证平台”，安排外业人员实地举证。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1868, '1648881410473847805', '内业根据实地举证照片核实实地地类，并将实地是耕地的图斑分割后入库并提交省级核查。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1869, '1648881410473847805', '将省级核查不通过的图斑，重新反馈乡镇，补充举证或者再次整改，然后重新举证内业处理后二次提交。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1870, '1648881410471261557', '房产测绘', NULL, '户', '1500', '2022-05-30', '只对现有宗地上的房屋进行平面图测绘。');
INSERT INTO `cmc_contract_work` VALUES (1871, '1648881410471261557', '地籍测绘', NULL, '宗', '1500', '2022-05-30', '根据实际情况开展集体土地及农村宅基地权属调查，进行宗地测绘并绘制宗地图。');
INSERT INTO `cmc_contract_work` VALUES (1872, '1648881410471261557', '地籍测绘及房产测绘', NULL, '宗', '6000', '2022-05-30', '现有宗地上的房屋进行平面图测绘，根据实际情况开展集体土地及农村宅基地权属调查，进行宗地测绘并绘制宗地图。');
INSERT INTO `cmc_contract_work` VALUES (1873, '1648881410471261557', '地籍核实', NULL, '宗', '1500', '2022-05-30', '进行宗地测绘并绘制宗地图，无需做权籍调查表，只需出宗地图。');
INSERT INTO `cmc_contract_work` VALUES (1874, '1648881410468295383', '2021年3月31日前按时按质完成外业测量。', NULL, '项', '1', '2021-03-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1875, '1648881410468295383', '2021年4月30日前按时按质完成成果资料的收集整理归档。', NULL, '项', '1', '2021-04-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1876, '1648881410461901082', '本次工作划界范围为苍溪县25条河流河湖管理范围。', NULL, '项', '1', NULL, '合同工作内容详见第三条。工期：2020年9月底前完成河湖管理范围划定成果并通过专家评审；2020年11月底前完成管理桩、告示牌的制作与安装并通过完工验收。');
INSERT INTO `cmc_contract_work` VALUES (1877, '1648881410461347563', '射水河流域河道1：500断面测量', '1:500', 'km', '1.61', '2024-06-03', NULL);
INSERT INTO `cmc_contract_work` VALUES (1878, '1648881410461347563', '断面基点测量', NULL, '点', '14', '2024-06-03', '7条断面，每条2个基点');
INSERT INTO `cmc_contract_work` VALUES (1879, '1648881410461347563', '射水河沿岸地物点高程测量', NULL, '点', '6', '2024-06-03', NULL);
INSERT INTO `cmc_contract_work` VALUES (1880, '1648881410461347563', '射水河跨河桥梁高程测量', NULL, 'km', '10', '2024-06-03', NULL);
INSERT INTO `cmc_contract_work` VALUES (1881, '1648881410461347563', '射水河流域1：10000地形地类测绘', '1:10000', '幅', '23', '2024-06-03', '本次地形图采用购买已成图，并对已成图进行拼接、处理等方式，获取该区域地形以满足项目部需求。');
INSERT INTO `cmc_contract_work` VALUES (1882, '1648881410447192454', '城轨快线可研项目1：2000地形补测', '1:2000', '项', '1', NULL, '乙方对甲方委托的城轨快线可研项目1：2000地形补测，于任务明确后40个日历天内提交甲方检查、验收。');
INSERT INTO `cmc_contract_work` VALUES (1883, '1648881410443000246', '自贡市水系连通用地土地勘测测绘(包括征地和供地)。', NULL, '项', '1', NULL, '自贡市东部新城（大安区和沿滩区）自贡市水系连通用地范围,其中征地约1030亩、供地约730亩。');
INSERT INTO `cmc_contract_work` VALUES (1884, '1648881410442959061', '对南海区樵江路改造（九江段）项目项目范围内的测量工程进行地籍及房产测绘。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1885, '1648881410442959061', '房屋及附属设施面积/长度测量', NULL, NULL, NULL, NULL, '按实际发生的工作量');
INSERT INTO `cmc_contract_work` VALUES (1886, '1648881410442959061', '管线测量', NULL, NULL, NULL, NULL, '按实际发生的工作量');
INSERT INTO `cmc_contract_work` VALUES (1887, '1648881410442959061', '地形图测绘', NULL, NULL, NULL, NULL, '按实际发生的工作量');
INSERT INTO `cmc_contract_work` VALUES (1888, '1648881410442959061', '界址点放样', NULL, NULL, NULL, NULL, '按实际发生的工作量');
INSERT INTO `cmc_contract_work` VALUES (1889, '1648881410441228534', '重庆至黔江铁路6标精测网复测;', NULL, '次', '9', '2024-12-20', '每半年复测本项目范围内的CPI点、CPII点、加密CPII点、高程网，确保测量成果质量，确保在规定的时间内完成各项技术服务，确保施工安全，成果质量通过评估等。');
INSERT INTO `cmc_contract_work` VALUES (1890, '1648881410441185548', '秤架乡、青莲镇、江英镇、杜步镇“房地一体”农村不动产登记发证工作。', NULL, '项', '1', NULL, '(一)项目自中标之日起至2020年12月31日前完成清远市阳山县秤架乡、青莲镇、江英镇、杜步镇“房地一体”农村不动产登记发证全部工作并通过项目验收。具体期限以省厅统一验收时间为准，若出台新的通知，或非乙方原因造成不能按计划完成相应工作，工期顺延。');
INSERT INTO `cmc_contract_work` VALUES (1891, '1648881410430800135', '放线', NULL, '点', '22', NULL, '本工程的测量工作定于 由甲方通知 开工, 测量完成后10日内 提交测绘成果资料');
INSERT INTO `cmc_contract_work` VALUES (1892, '1648881410430428516', '对重庆江北嘴投资集团有限公司管辖的区域截至2020年8月30日前已建成市政道路的市政消火栓进行现场核查。', NULL, '项', '1', '2020-09-21', '详见合同第一条“工作范围和内容”。');
INSERT INTO `cmc_contract_work` VALUES (1893, '1648881410429524200', '广州市白云区市管河道防洪潮闸闭合段情况摸查坐标高程测量', NULL, '点', '202', '2021-12-31', '闸门33处，每个闸坝测6个点的坐标和高程，2个长度，每个长度2点');
INSERT INTO `cmc_contract_work` VALUES (1894, '1648881410421236154', 'D级GNSS测量', 'Ⅲ', '点', '8', NULL, '含引测2点');
INSERT INTO `cmc_contract_work` VALUES (1895, '1648881410421236154', '五导线测量（三等三角高程）', '五等', 'km', '10', NULL, '用于测放钻孔');
INSERT INTO `cmc_contract_work` VALUES (1896, '1648881410421236154', '1:1000地形图测绘', '1:1000', 'km²', '0.14', NULL, '坝址区');
INSERT INTO `cmc_contract_work` VALUES (1897, '1648881410421236154', '1:1000地形图测绘', '1:1000', 'km²', '0.05', NULL, '厂址区');
INSERT INTO `cmc_contract_work` VALUES (1898, '1648881410416731296', '番禺区 62 条河涌管网完善及农村生活污水查缺补漏工程控制测量、地形', NULL, '项', '1', NULL, '（1）合同工期：合同签订后 30 天（日历天）内提交全部测量成果；（2）后期服务时间：自合同签订之日起至项目完工为止，具体以甲方任务委托书的进度安排为准。');
INSERT INTO `cmc_contract_work` VALUES (1899, '1648881410416524017', '现状地形测量', NULL, NULL, NULL, '2020-06-30', '单个工程服务期为甲方通知项目测量后第3日历天内完成并提交正式报告书四份。总服务期为合同签订之日起至2020年6月30日。');
INSERT INTO `cmc_contract_work` VALUES (1900, '1648881410416524017', '地形测量与土石方算量', NULL, NULL, NULL, '2020-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1901, '1648881410416524017', '地下探管测量', NULL, NULL, NULL, '2020-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1902, '1648881410414675394', '南部县菜子河等15条规模以下河流河道管理范围划定。', NULL, '项', '1', NULL, '签订合同且甲方资料齐备后60个工作日内完成。');
INSERT INTO `cmc_contract_work` VALUES (1903, '1648881410407875991', '坝址1:1000地形地类图', '1:1000', 'km²', '1.94', '2021-03-02', '原有1:2000地形图');
INSERT INTO `cmc_contract_work` VALUES (1904, '1648881410407875991', '坝址1:1000地形地类图', '1:1000', 'km²', '2', '2021-03-02', '原有1:5000地形图');
INSERT INTO `cmc_contract_work` VALUES (1905, '1648881410407875991', '坝址1:500水下地形图测绘', '1:500', 'km²', '0.14', '2021-03-02', NULL);
INSERT INTO `cmc_contract_work` VALUES (1906, '1648881410407875991', '厂址区1:1000地形图', '1:1000', 'km²', '1.7', '2021-03-02', '原有1:2000地形图');
INSERT INTO `cmc_contract_work` VALUES (1907, '1648881410407875991', '厂址区1:1000地形图', '1:1000', 'km²', '0.85', '2021-03-02', '原有1:5000地形图');
INSERT INTO `cmc_contract_work` VALUES (1908, '1648881410407875991', '厂址区新测1:1000地形图', '1:1000', 'km²', '2.39', '2021-03-02', NULL);
INSERT INTO `cmc_contract_work` VALUES (1909, '1648881410407875991', '厂址区1:500水下地形图测绘', '1:500', 'km²', '0.1', '2021-03-02', NULL);
INSERT INTO `cmc_contract_work` VALUES (1910, '1648881410407875991', '引水线路1:5000地形图测绘', '1:5000', 'km²', '7.58', '2021-03-02', NULL);
INSERT INTO `cmc_contract_work` VALUES (1911, '1648881410407875991', '库区改建公路1:2000地形图测绘', '1:2000', 'km²', '5.2', '2021-03-02', NULL);
INSERT INTO `cmc_contract_work` VALUES (1912, '1648881410407875991', '库区1:2000地形地类图测绘', '1:2000', 'km²', '8.4', '2021-03-02', NULL);
INSERT INTO `cmc_contract_work` VALUES (1913, '1648881410407875991', '施工场地1:1000地形图', '1:1000', 'km²', '6.48', '2021-03-02', NULL);
INSERT INTO `cmc_contract_work` VALUES (1914, '1648881410407875991', '施工场地1:1000地形地类图', '1:1000', 'km²', '0.62', '2021-03-02', NULL);
INSERT INTO `cmc_contract_work` VALUES (1915, '1648881410407875991', '厂址区下游至易贡藏布汇口1:2000地形图测绘', '1:2000', 'km²', '2.5', '2021-03-02', NULL);
INSERT INTO `cmc_contract_work` VALUES (1916, '1648881410407875991', '紫霞库区1:1000横断面测量', '1:1000', 'km', '20', '2021-03-02', NULL);
INSERT INTO `cmc_contract_work` VALUES (1917, '1648881410407875991', '断面基点测量', NULL, '点', '80', '2021-03-02', NULL);
INSERT INTO `cmc_contract_work` VALUES (1918, '1648881410407875991', '紫霞库区1:1000纵断面测量', '1:1000', 'km', '25', '2021-03-02', NULL);
INSERT INTO `cmc_contract_work` VALUES (1919, '1648881410407248219', '佛山南海西樵宗地图测绘', NULL, 'm²', '268538.52', NULL, '承包人应当自发包人提供本次项目测绘所需资料齐全之日起后 5 个日历天完成测绘工作，并出具相关主管部门认定的文件成果等。');
INSERT INTO `cmc_contract_work` VALUES (1920, '1648881410400120133', '资料收集及数据分析', NULL, '项', '1', NULL, '大竹县城区地下管网普查工作内容');
INSERT INTO `cmc_contract_work` VALUES (1921, '1648881410400120133', '管线测绘', NULL, 'km', '600', NULL, '大竹县城区地下管网普查工作内容');
INSERT INTO `cmc_contract_work` VALUES (1922, '1648881410400120133', '建立地下管线管理信息系统', NULL, 'km', '600', NULL, '大竹县城区地下管网普查工作内容');
INSERT INTO `cmc_contract_work` VALUES (1923, '1648881410400120133', '成果归档', NULL, '项', '1', NULL, '大竹县城区地下管网普查工作内容');
INSERT INTO `cmc_contract_work` VALUES (1924, '1648881410400120133', '前期准备工作', NULL, '项', '1', NULL, '大竹县城区地下管网检测工作内容');
INSERT INTO `cmc_contract_work` VALUES (1925, '1648881410400120133', '视频采集工作', NULL, 'km', '300', NULL, '大竹县城区地下管网检测工作内容');
INSERT INTO `cmc_contract_work` VALUES (1926, '1648881410400120133', '管道视频分析及结构性、功能性缺陷分析', NULL, 'km', '300', NULL, '大竹县城区地下管网检测工作内容');
INSERT INTO `cmc_contract_work` VALUES (1927, '1648881410400120133', '整理成果资料', NULL, '项', '1', NULL, '大竹县城区地下管网检测工作内容');
INSERT INTO `cmc_contract_work` VALUES (1928, '1648881410393321188', '四等GNSS控制', '四等', '点', '132', NULL, '卫片采购及内业工作即日启动，每批次成果在下达21日内交付。');
INSERT INTO `cmc_contract_work` VALUES (1929, '1648881410393321188', '四等高程控制', '四等', 'km', '140', NULL, '外业工作从接到通知3日内出发。 现场工作在正式启动后35个有效工作日内完成。 遇防疫、降雪或其他不可抗力导致本年作业季节无法完成的，顺延到下一年度。');
INSERT INTO `cmc_contract_work` VALUES (1930, '1648881410393321188', '卫片像控点', NULL, '点', '40', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1931, '1648881410393321188', '立体卫片采购', NULL, 'km²', '840', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1932, '1648881410393321188', '彩色卫片采购', NULL, 'km²', '600', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1933, '1648881410393321188', '卫片立体测图1:2000', '1:2000', 'km²', '132', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1934, '1648881410393321188', '0. 5米DOM制作', NULL, 'km²', '132', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1935, '1648881410389708702', '7条乡级河流、17座水库的水域岸线管理范围划界工作。', NULL, '项', '1', '2020-12-30', '具体工作内容详见合同第四条。');
INSERT INTO `cmc_contract_work` VALUES (1936, '1648881410388432085', '苍溪县25条河流河湖管理范围划定', NULL, '项', '1', '2020-11-30', '工作内容详见合同第三条服务内容与质量标准。 项目完成时间： 2020年9月底前完成河湖管理范围划定成果并通过专家评审；2020年11月底前完成管理桩、告示牌的制作与安装并通过完工验收。');
INSERT INTO `cmc_contract_work` VALUES (1937, '1648881410382163554', '库周交通木茹连接线道路线位测量', NULL, 'km', '1.4', NULL, '合同签订后30日历天，且须满足项目业主工期要求。');
INSERT INTO `cmc_contract_work` VALUES (1938, '1648881410375591598', '改造建筑物外立面44栋，涉及建筑外墙立面改造面积约34000平方米。', NULL, 'm²', '34000', NULL, '本工程工期为15个工作日，具体进场时间以甲方通知为准，并按要求的时间交付全部测量成果资料。');
INSERT INTO `cmc_contract_work` VALUES (1939, '1648881410373373665', '本项目涉及25个老旧小区（成龙路街道4个，柳江街道4个、沙河街道6个、锦华路街道10个、狮子山街道1个）。立面约410000m²、平面约660000m²。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1940, '1648881410368129016', '中国能源建设集团云南省电力设计院有限公司2023年二季度至2024年四季度航测内业项目的部分航测内业技术服务工作', NULL, '项', '1', '2024-12-31', '甲方根据具体实施项目现场的实施条件，合理安排工程项目进度，乙方应按甲方现场管理人员下发的指令组织开展工作。具体开工时间及进度要求按甲方最终与中标单位签订航测内业服务技术服务合同的约定执行。');
INSERT INTO `cmc_contract_work` VALUES (1941, '1648881410368129016', '1:500数字线划地形图（DLG）生产', '1:500', 'km²', NULL, '2024-12-31', '1、本协议履行期限自2023年框架协议签订之日起至 2024 年 12 月31日止。');
INSERT INTO `cmc_contract_work` VALUES (1942, '1648881410368129016', '1:2000数字线划地形图（DLG）生产', '1:2000', 'km²', NULL, '2024-12-31', '据工程项目的需求下订单，签订具体项目订单合同。');
INSERT INTO `cmc_contract_work` VALUES (1943, '1648881410366968717', '完成三台县2021年灾毁农田修复项目10343亩田型调整测量任务，包括野外数据采集、工程计量、出具工程测量报告。', NULL, '项', '1', NULL, '测量完成期限从合同签定算起不超过30日历天。如遇不可抗力因素，经发包人批准工期顺延。');
INSERT INTO `cmc_contract_work` VALUES (1944, '1648881410362562566', '永久界桩布置设计、制作、运输、开挖、安装、埋设', NULL, '项', '1', NULL, '甲方明确工作范围后 7 天内，配合完成界桩布置设计工作；');
INSERT INTO `cmc_contract_work` VALUES (1945, '1648881410362562566', '加密界桩布置设计、制作、运输、开挖、安装、埋设', NULL, '项', '1', NULL, '甲方明确工作范围后 20 天内，完成界桩制作工作；');
INSERT INTO `cmc_contract_work` VALUES (1946, '1648881410362562566', '临时加密界桩布置设计、制作、运输、开挖、安装、埋设', NULL, '项', '1', NULL, '甲方明确工作范围后 60 天内，完成现场界桩埋设、界桩放线与测量、征地红线范围图绘制等工作。');
INSERT INTO `cmc_contract_work` VALUES (1947, '1648881410362562566', '永久界桩、加密界桩、临时加密界桩放线与测量', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1948, '1648881410362562566', '征地界桩配合测量', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1949, '1648881410362562566', '建设征地红线范围图绘制', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1950, '1648881410358610942', '新龙县安戈、耶勒克光伏电站工程地形图测绘', '1:2000', '项', '1', NULL, '本项目地形图测绘工作在确定中标单位后的30天内完成，签订合同后30天内提交中间成果，30天内提交满足业主要求的最终成果。');
INSERT INTO `cmc_contract_work` VALUES (1951, '1648881410357926147', '三台县水利基础设施空间布局专项规划', NULL, '项', '1', '2020-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1952, '1648881410357926147', '三台县河湖岸线保护与利用规划', NULL, '项', '1', '2021-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1953, '1648881410357926147', '三台县“十四五”水利发展规划', NULL, '项', '1', '2021-12-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (1954, '1648881410354070864', '取水口、水厂1：500地形地类图测绘', '1:500', 'km²', '0.12', NULL, '合同工期为合同签订后7日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (1955, '1648881410354070864', '引水线路1:2000地形地类图测绘', '1:2000', 'km²', '1.85', NULL, '合同工期为合同签订后7日历天内完成');
INSERT INTO `cmc_contract_work` VALUES (1956, '1648881410354038149', '对北环路北侧土方回填项目（一期）—测绘复核工作', NULL, 'm²', '170000', NULL, '在合同生效后15日，作为全部资料的提交时间，如遇不可抗拒的自然因素可顺延。');
INSERT INTO `cmc_contract_work` VALUES (1957, '1648881410350550891', '工作底图制定，线索图斑提取；线索图斑及图斑外新增线索外业核查、图斑范围调整、勾绘及信息采集，录像举证等；汇交平台信息完善，内业梳理核查，举证上传资料检查，按补正进行修改，部下发数据和省下发数据叠加分析与补充举证，图斑范围调整、勾绘及信息采集与完善等。', NULL, '项', '1', NULL, '自合同签订之日起90日。');
INSERT INTO `cmc_contract_work` VALUES (1958, '1648881410350550891', '项目内容：2019年至2022年9月，国家层面分两次下发问题图斑共计39396个。', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1959, '1648881410348435466', '四等GPS控制点成果', '四等', '点', '37', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1960, '1648881410348435466', '1：2000带状地形测量成果', '1:2000', 'km²', '22', '2021-11-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (1961, '1648881410339742269', '（佛山国家高新区东部现代物流产业集聚区南海片区互通建设项目）测绘服务', NULL, 'm²', '60936.58', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1962, '1648881410335448898', '清理河流现状：收集整理相关规划报告，梳理河道内现有涉水工程现状，收集水文、气象和地理测量等相关基础资料，开展水文分析算，确定河道管理范围。', NULL, '项', '1', NULL, '1.项目工期：2019年11月15日前完成河道管理范围划定报告的编制，2020年3月31日前完成制作、安装、埋设河道管理界桩、告示牌等相关工作，具体工作时间安排按照雅水发[2019]116号有关规定执行。2.项目质保期：项目验收合格之日起2年。');
INSERT INTO `cmc_contract_work` VALUES (1963, '1648881410335448898', '绘制工作底图：根据实际，选择航拍或全野外测量等方式，进行河道带状地形图和河道大断面测量，绘制完成带状地形图和桩点大断面工作底图。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1964, '1648881410335448898', '定界树桩：以带状地形图为基础，按照水面线计算成果，绘制河湖管理范围线，标注管理线桩（牌）点，按照《四川省河湖管理范围划定操作指南》要求，制作、安装埋设界桩和告示牌。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1965, '1648881410335448898', '成果运用：形成的成果资料通过上报审核，进行规范化、标准化和数字化处理，建立数据库，实现河湖精准化、长效化管理。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1966, '1648881410335448898', '按照《四川省河湖管理范围划定操作指南》、《四川省河湖管理范围划定数字线划专用图生产指南》的要求，完成河湖划界测绘、洪水分析计算、桩牌制作安装等河湖划界相关工作内容。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (1967, '1648881410331459017', '乙方以仪陇县2021年度变更“一上”数据结合三调数据以及历年耕地数据、林地一张图数据为基础，安排内业人员根据实地举证照片核实实地种类，并将实地是新增耕地的图斑分割后入库。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1968, '1648881410330549313', '四等GNSS测量', '四等', '点', '10', '2021-07-07', NULL);
INSERT INTO `cmc_contract_work` VALUES (1969, '1648881410330549313', '多吉坝址1:1000地形图测绘', '1:1000', 'km²', '1.33', '2021-07-07', NULL);
INSERT INTO `cmc_contract_work` VALUES (1970, '1648881410330549313', '木灰料场1:1000地形图测绘', '1:1000', 'km²', '0.8', '2021-07-07', NULL);
INSERT INTO `cmc_contract_work` VALUES (1971, '1648881410330549313', '牙根二级占地范围坐标转换（转成CGC2000）', NULL, '点', '460', '2021-07-07', NULL);
INSERT INTO `cmc_contract_work` VALUES (1972, '1648881410330549313', '牙根二级占地范围shp文件制作', NULL, '点', '460', '2021-07-07', NULL);
INSERT INTO `cmc_contract_work` VALUES (1973, '1648881410330549313', '多吉占地范围范围坐标转换（转成CGC2000）', NULL, '点', '456', '2021-07-07', NULL);
INSERT INTO `cmc_contract_work` VALUES (1974, '1648881410330549313', '多吉占地范围范围shp文件制作', NULL, '点', '456', '2021-07-07', NULL);
INSERT INTO `cmc_contract_work` VALUES (1975, '1648881410319337004', '为阿坝小金四姑娘山110kV输变电工程国土用地报件提供咨询服务 ', NULL, '项', '1', NULL, '技术服务的内容：根据国家和四川省国土资源斤相关文件要求及建设用地报件工作有关规定，对阿坝小金四姑娘山110kV输变电程变电站建设用地开展勘测定界、不动产测绘工作，编制该项目勘测定界技木报告书与不动产测绘报告书并报送相关主管部门审查并通过审查验收；协助甲方在用地报批及不动产证办理工作中的资料收集整理、组卷上报等技术支撑服务保障工作，最终取得建设用地批复及不动产登记证。技术服务期限：建设用地报批2021年06月30日前完成资料编制，最终以取得批文时间为准，取得批复后编制不动产测绘报告，办理不动产登记证，最终以取得证书时间为准。');
INSERT INTO `cmc_contract_work` VALUES (1976, '1648881410312850944', '坝区1:1000地形图测绘', '1:1000', 'km²', '0.89', NULL, '签订合同后10个日历天内提交全部成果');
INSERT INTO `cmc_contract_work` VALUES (1977, '1648881410312850944', '坝区1:1000水下地形图测绘', '1:1000', 'km²', '0.10', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1978, '1648881410312850944', '五等GNSS测量', '五等', '点', '6', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1979, '1648881410312850944', '1:1000三维地形面', '1:1000', 'km²', '0.99', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1980, '1648881410309053516', '1:500地形地类图测绘', '1:500', 'km²', '0.1', NULL, '合同签订之后30日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (1981, '1648881410303095423', '大渡河金川水电站库区G248(原S211）复建公路工程第Ⅲ标段工程。', NULL, '项', '1', NULL, '协议期限：自2020年04月25日开始，暂定1个月。');
INSERT INTO `cmc_contract_work` VALUES (1982, '1648881410299732520', '生态保护红线勘界', NULL, 'km', '136', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1983, '1648881410299732520', '打桩立标', NULL, '个', '8', NULL, '完成生态保护红线勘界约136公里，标识牌制作与埋设约 8个，完成界桩和标识牌测量约117个，最终工作范围和工作量以甲方指定为准。');
INSERT INTO `cmc_contract_work` VALUES (1984, '1648881410297398475', '本次界桩制作埋设工作范围为市管河道，凯江古井镇新妙、万安堤防段的2处点位，进行河道管理范围线界桩制作埋设工作，以便后期规范管理。', NULL, '根', '15', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1985, '1648881410296639104', '利用现有地下管线普查数据成果，在普查更新范围内采用全野外探测及内外业结合核实探测的方式摸清地下管线类型、管线属性等基本情况，收集地下管线隐患信息资料并入库。', NULL, '项', '1', '2022-10-31', '分批工作内容完成时间要求详见合同第4条“工期要求”。');
INSERT INTO `cmc_contract_work` VALUES (1986, '1648881410291107304', '对昌都市卡若区城关镇嘎东街不稳定斜坡治理工程效果监测', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1987, '1648881410291107304', '对昌都市类乌齐县吉多乡政府后山滑坡治理工程效果监测', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1988, '1648881410291107304', '对林芝市工布江达县错高乡罗池村曲杰荣泥石流治理工程效', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1989, '1648881410291107304', '对林芝市朗县中学不稳定斜坡治理工程效果监测', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1990, '1648881410291107304', '对日喀则市定日县盆吉乡盆吉村盆吉沟泥石流治理工程效果', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (1991, '1648881410289032772', '石棉县田湾河河湖岸线保护与利用规划编制工作', NULL, '项', '1', NULL, '合同签订后30个工作日内提交田湾河石棉段岸线保护与利用规划报告初稿；技术审查具体工作时间和要求按照省市关于岸线保护与利用规划报告有关规定执行。');
INSERT INTO `cmc_contract_work` VALUES (1992, '1648881410287503999', '三等GPS测量', '三等', '点', '4 ', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1993, '1648881410287503999', '四等GPS测量', '四等', '点', '10', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1994, '1648881410287503999', '五等导线（代替四等三角高程）', '五等', 'km', '13', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1995, '1648881410287503999', '坝区1:500地形图测绘', '1:500', 'km²', '1.25', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1996, '1648881410287503999', '坝区1:500水下地形图测绘', '1:500', 'km²', '0.16', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1997, '1648881410287503999', '浸没区1:1000地形图测绘', '1:1000', 'km²', '4.38', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1998, '1648881410287503999', '库区1:2000地形图测绘', '1:2000', 'km²', '9.75', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (1999, '1648881410287503999', '二级坝址至南桠河口1:1000地形图测绘', '1:1000', 'km²', '0.2', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (2000, '1648881410287503999', '1:1000地形图缩编至1:2000地形图', '1:2000', 'km²', '4.38', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (2001, '1648881410287503999', '1:500地形图缩编至1:2000地形图', '1:2000', 'km²', '0.9', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (2002, '1648881410287503999', '坝区1:500三维地形面制作', '1:2000', 'km²', '1.3', '2021-06-10', NULL);
INSERT INTO `cmc_contract_work` VALUES (2003, '1648881410282549870', '对佛山市季华路西延线工程（南海段）项目丹灶镇范围内的测量工程进行地籍及房产测绘。', NULL, '项', '1', NULL, '委托服务期间自 2020年 9 月至本项目完成止。');
INSERT INTO `cmc_contract_work` VALUES (2004, '1648881410270855494', '乳源瑶族自治县城区废旧矿山环境修复治理工程竣工图编制及工程量复核', NULL, '项', '1', NULL, '乙方对项目区内2处废旧矿山修复工程进行现场实地测绘并出具竣工图，对施工单位上报的完成工程量进行实地复核并出具复核报告，对复核数据负责，提交甲方检查验收。');
INSERT INTO `cmc_contract_work` VALUES (2005, '1648881410270491484', '控制测量', NULL, '点', '3', NULL, '测绘现场满足相关验收条件后同步进场施测。以双方书面确认的日期为开工日期。工期为30 个工作日。');
INSERT INTO `cmc_contract_work` VALUES (2006, '1648881410270491484', '1:500地形数据采集', NULL, 'm²', '35478.00', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2007, '1648881410270491484', '验测平面位置', NULL, '边', '2', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2008, '1648881410270491484', '验测高程、高度', NULL, '栋', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2009, '1648881410270491484', '规划面积测量', NULL, 'm²', '61195.40', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2010, '1648881410270491484', '地下管线测量', NULL, 'km', '8', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2011, '1648881410270491484', '不动产测量', NULL, 'm²', '61195.40', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2012, '1648881410263993280', '佛山市南海区九江镇临港国际产业社区所有权宗地图', NULL, '宗', '41', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2013, '1648881410262720843', '控制测量', NULL, '点', '3', NULL, '30 个日历天(自开工之日起计算)，承包方测量组织计划完成后同步进场施测。以双方书面确认的日期为开工日期。');
INSERT INTO `cmc_contract_work` VALUES (2014, '1648881410262720843', '1:500地形数据采集', '1:500', 'm²', '46049.1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2015, '1648881410262720843', '验测平面位置', NULL, '边', '2', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2016, '1648881410262720843', '验测高程、高度', NULL, '栋', '5', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2017, '1648881410262720843', '规划面积测量', NULL, 'm²', '70371.1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2018, '1648881410262720843', '地下管线测量', NULL, 'km', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2019, '1648881410262720843', '房产面积测量', NULL, 'm²', '70371.1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2020, '1648881410256492469', '控制测量', NULL, NULL, NULL, '2021-05-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (2021, '1648881410256492469', '地形测量（水上1:1000、局部水下1:1000）', NULL, NULL, NULL, '2021-05-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (2022, '1648881410256492469', '断面测量（1:1000）', NULL, NULL, NULL, '2021-05-06', NULL);
INSERT INTO `cmc_contract_work` VALUES (2023, '1648881410251834900', '产权面积测绘', NULL, 'm²', '2329.76', NULL, '合同签订1-3日内，向乙方提供满足项目开展所必需、且来源合法的有关资料。');
INSERT INTO `cmc_contract_work` VALUES (2024, '1648881410250875590', 'E级GPS测量', NULL, '点', '4', NULL, '自签定合同起15个工作日（遇不可抗拒因素工期顺延），提交所有规划设计指定范围的资料光盘两张（控制成果，各位置的数字化地形图），地形图、控制点成果提供纸质资料三份。');
INSERT INTO `cmc_contract_work` VALUES (2025, '1648881410250875590', '1：500地形图测量', NULL, 'km²', '0.35', NULL, '自签定合同起15个工作日（遇不可抗拒因素工期顺延），提交所有规划设计指定范围的资料光盘两张（控制成果，各位置的数字化地形图），地形图、控制点成果提供纸质资料三份。');
INSERT INTO `cmc_contract_work` VALUES (2026, '1648881410250539000', '1:2000航测工作底图测绘及收集', '1:2000', '项', '1', NULL, '经甘孜州水利局梳理，各县水利部门确认，流域面积200-3000km2、河流两岸有人居住或有农田、草场等保护对象的河道共计179条，其中金沙江水系48条河；雅砻江水系101条河；大渡河水系25条河；黄河水系5条河。合同签订且乙方收到甲方提供的资料后 60 天内完成甘孜藏族自治州水旱灾害风险普查（山丘区中小河流洪水淹没图编制）送审稿。');
INSERT INTO `cmc_contract_work` VALUES (2027, '1648881410250539000', '1:10000航测工作底图收集', '1:10000', '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2028, '1648881410250539000', '水文分析计算', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2029, '1648881410250539000', '洪水淹没线绘制', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2030, '1648881410250539000', '动态淹没图绘制', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2031, '1648881410247956787', '项目范围：马来西亚东海岸铁路横贯马来西亚半岛东西，线路自哥打巴鲁引出，沿东海岸向南，途径瓜拉丁加奴、龙运、关丹,然后折向西，经文德甲、文冬，至吉隆坡终点站TTGombak,线路长593.7km（含支线69.1公里）；2020年项目二期延伸到巴生港（二期长75.49Km)，线路总长669.19Km。', NULL, NULL, NULL, NULL, '第一期开工日期2023年8月、第二期开工日期2024年7月、第三期开工日期2025年6月，现场开工日期如有调整，按照甲方通知的开始时间为准。');
INSERT INTO `cmc_contract_work` VALUES (2032, '1648881410247956787', '暂定包括全线CP0、CPI、CPⅡ、全线水准点复测。对全线CP0、CPI、CPⅡ控制点和全线路水准点进行复测，编写和提交复测报告，并根据我方复测报告评审意见进行修订或测量，直至满足要求。', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2033, '1648881410247956787', 'CP0 复测', NULL, '点', '27', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2034, '1648881410247956787', 'CPI 复测', NULL, '点', '257', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2035, '1648881410247956787', 'CPⅡ复测', NULL, '点', '1375', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2036, '1648881410247956787', 'CP0 、CPI 和CPⅡ点位恢复', NULL, '点', '0', NULL, '由施工方负责');
INSERT INTO `cmc_contract_work` VALUES (2037, '1648881410247956787', '全程水准测 量（二等）', NULL, 'km', '2000', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2038, '1648881410247956787', '进出场费用', NULL, '次', NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2039, '1648881410243411447', '乙方在2023年7月1日至2024年6月30日期间承接甲方指派的监测项目技术服务工作；具体工作内容、工作量及工期等甲方在单项工程合同中明确。', NULL, '项', '1', '2024-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (2040, '1648881410241016160', '准备工作、资料收集', NULL, '项', '1', '2022-11-15', '要求在签订合同之后立即进场开展测绘工作，并在2022年7月10日前提交灌区一张图（不含灌区内边界）成果，即完成数据入库；2022年11月15日前提交灌区一张图所有成果。');
INSERT INTO `cmc_contract_work` VALUES (2041, '1648881410241016160', '灌区外边界确定', NULL, '项', '1', '2022-11-15', '同上');
INSERT INTO `cmc_contract_work` VALUES (2042, '1648881410241016160', '灌区内边界确定、测绘及图件编制', NULL, '项', '1', '2022-11-15', '同上');
INSERT INTO `cmc_contract_work` VALUES (2043, '1648881410241016160', '数据生产及入库', NULL, '项', '1', '2022-11-15', '同上');
INSERT INTO `cmc_contract_work` VALUES (2044, '1648881410241016160', '测量报告及资料整理', NULL, '项', '1', '2022-11-15', '同上');
INSERT INTO `cmc_contract_work` VALUES (2045, '1648881410241016160', '检查、修改及成果提交', NULL, '项', '1', '2022-11-15', '同上');
INSERT INTO `cmc_contract_work` VALUES (2046, '1648881410239584326', '枢纽区1:1000三维地形面制作', '1:1000', '幅', '5', NULL, '合同工期：合同签订后6日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (2047, '1648881410239584326', '枢纽区1:1000地形图坐标转换', '1:1000', '点', '40', NULL, '合同工期：合同签订后6日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (2048, '1648881410239584326', '枢纽区1:2000放大成1:1000地形图', '1:1000', 'km²', '0.45', NULL, '合同工期：合同签订后6日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (2049, '1648881410239584326', '坐标转换外业数据采集', NULL, '人.天', '3', NULL, '合同工期：合同签订后6日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (2050, '1648881410239584326', '坐标点转换', NULL, '点', '184', NULL, '合同工期：合同签订后6日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (2051, '1648881410233908946', '1:2000航空摄影', '1:2000', 'km²', '56.9', NULL, '补充协议签订后15日历天内完工');
INSERT INTO `cmc_contract_work` VALUES (2052, '1648881410233908946', '1:2000地形图（水下）', '1:2000', 'km²', '2.28', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2053, '1648881410233908946', '五等GNSS测量', '五等', '点', '6', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2054, '1648881410233908946', '1:2000实景三维模型', '1:2000', 'km²', '56.9', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2055, '1648881410233908946', '1:10000地形图', '1:10000', '幅', '3', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2056, '1648881410230989354', '本次6处点位需埋设34根界桩，分两批次完成，第一批次17根界桩需在合同签订后3日内安装完成。', NULL, NULL, NULL, NULL, '本次划定工作范围为省管河道涪江绵阳市三台县段中的6处点位，进行河道管理范围线界桩埋设工作，以便后期规范管理。');
INSERT INTO `cmc_contract_work` VALUES (2057, '1648881410230989354', '第二批次17根界桩待具备安装条件后3日内安装完成，并提交技术报告。', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2058, '1648881410227794174', '对计划开展测绘区域进行无人机航飞出具正射影像', NULL, '项', '1', NULL, '根据委托航拍、测绘服务工作的时间安排，30日内完成航拍、测绘服务出具报告书。');
INSERT INTO `cmc_contract_work` VALUES (2059, '1648881410227794174', '1：500精度的地籍测绘', '1:500', '亩', '1500', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2060, '1648881410227794174', '房产测绘', '1:500', 'm²', '250000', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2061, '1648881410227794174', '权属调查', NULL, '项', NULL, NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2062, '1648881410227794174', '名贵树木调查', NULL, '项', NULL, NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2063, '1648881410227794174', '根据要求出具相关测绘报告', NULL, '项', NULL, NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2064, '1648881410225456144', '开展全州2021年度国土变更调查核查', NULL, '项', '1', NULL, '详见合同第三条、服务内容与质量标准');
INSERT INTO `cmc_contract_work` VALUES (2065, '1648881410225456144', '协助开展耕地资源质量分类更新与监测工作。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2066, '1648881410225456144', '协助开展调查监测有关的其它工作。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2067, '1648881410225456144', '配合开展日常工作。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2068, '1648881410225456144', '省、州审核期间，安排每县市不少于2人的工作人员轮班进行审核，原则县市提交成果24小时内反馈核查结果，并提供办公场所，供17县市人员修改资料。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2069, '1648881410222755173', '产权面积测绘', NULL, '户', '11', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2070, '1648881410220262588', '无人机航空摄影', NULL, '项', '1', NULL, '服务期限：为签订合同后1年。');
INSERT INTO `cmc_contract_work` VALUES (2071, '1648881410220262588', '1:1000数字正射影像制作或实景三维模型制作', NULL, '项', '1', NULL, '服务期限：为签订合同后1年。');
INSERT INTO `cmc_contract_work` VALUES (2072, '1648881410214518639', '沉降观测及水平度、垂直度检测技术服务项目', NULL, '项', '1', NULL, '详见P6“二、乙方承担的主要工作及责任”');
INSERT INTO `cmc_contract_work` VALUES (2073, '1648881410200338104', '内窥检测(CCTV)', NULL, 'km', '25', NULL, '工作内容包括：功能性排查，排水管线内窥检测：完成南岸区江南新城片区市政排水管网内窥检测（内窥检测管线管径≥d300）；内窥检测包括检查井、雨水口检查，排水口调查；配合完成整理资料，完成重庆市住房和城乡建设委员会的入库工作。');
INSERT INTO `cmc_contract_work` VALUES (2074, '1648881410200338104', '内窥检测(QV)', NULL, 'km', '5', NULL, '工期要求：80日历天，提交前乙方须完成内部检查验收工作。');
INSERT INTO `cmc_contract_work` VALUES (2075, '1648881410192970032', '佛山市南海区不动产登记宗地红线数据整理入库', NULL, '项', '1', '2020-12-31', '佛山市2000坐标系。');
INSERT INTO `cmc_contract_work` VALUES (2076, '1648881410191852464', '大坝水平位移监测控制网稳定性评判方法研究', NULL, '项', '1', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (2077, '1648881410191852464', '基于已知系统的大坝水平位移监测控制网稳定性评判分析软件研发', NULL, '项', '1', '2022-10-31', NULL);
INSERT INTO `cmc_contract_work` VALUES (2078, '1648881410191852464', '发明专利、软件著作权申请；完成学术论文录用，完成课题验收等工作内容。', NULL, '项', '1', '2023-09-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (2079, '1648881410189150812', '飞行', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2080, '1648881410189150812', '数据采集', NULL, 'km²', '100', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2081, '1648881410189150812', '激光点云数据处理、分类', NULL, 'km²', '100', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2082, '1648881410189150812', '正射影像图制作', NULL, 'km²', '100', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2083, '1648881410189150812', '1：2000地形图制作', '1:2000', 'km²', '75', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2084, '1648881410183642225', '西藏日喀则市聂拉木、定日风电场范围1:5000地形图测绘', '1:5000', '项', '1', NULL, '本项目地形图测绘工作在确定中标单位后的30天内完成，签订合同后30天内提交中间成果，30天内提交满足业主要求的最终成果。');
INSERT INTO `cmc_contract_work` VALUES (2085, '1648881410178734144', '惠州市金山新城水环境综合整治项目除莲塘布水库加固工程及白沙仔换水泵站外的测量及技术服务工作。', NULL, '批', '1', NULL, '合同签订后90天（日历天）内提交全部测量成果');
INSERT INTO `cmc_contract_work` VALUES (2086, '1648881410164555946', '对两江新区直属街道区域截至2020年6月30日前已建成未测绘的消火栓的分布进行现场测绘，并对原来已测绘的1332个市政消火栓进行核对，合并两江新区直属街道区域全部市政消火栓，按两江新区六个消防中队所管辖的区域制作各中队管辖区域的市政消火栓分布图；按市政消火栓测绘规范，测绘消火栓位置制作消火栓分布图和点线表等内业工作，同时协助录入重庆市消火栓建设管理支撑服务系统。', NULL, '项', '1', '2020-07-31', '两江新区直属街道鸳鸯街道、人和街道、天宫殿街道、翠云街道、大竹林街道、礼嘉街道、金山街道、康美街道八个区域');
INSERT INTO `cmc_contract_work` VALUES (2087, '1648881410163021188', '西安路街道新二村24栋等20个老旧小区及配套设施改造工程项目工程测绘工作。', NULL, '项', '1', NULL, '合同签订后15个日内完成。');
INSERT INTO `cmc_contract_work` VALUES (2088, '1648881410162868926', '开展项目勘测定界、放桩放线和征拆范围内的土地、建（构）筑物以及有关附属设施(如：水泥地、围墙等)测绘', NULL, '项', '1', '2023-08-16', '中标测绘单位分别为四个服务片区提供征地拆迁测绘服务。原则每名中标测绘单位只能为一个服务片区提供服务。');
INSERT INTO `cmc_contract_work` VALUES (2089, '1648881410162208644', '道孚抽水蓄能电站施工总布置范围地形地类图1:2000', '1:2000', 'km²', '7.75', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (2090, '1648881410162208644', '道孚抽水蓄能电站沿桑其柯对外交通范围地形图1:2000', '1:2000', 'km²', '3.4', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (2091, '1648881410162208644', '道孚抽水蓄能电站沿庆大河对外交通范围地形图1:2000', '1:2000', 'km²', '8.08', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (2092, '1648881410162208644', '道孚抽水蓄能电站沥青混凝土骨料场地形图1:1000', '1:1000', 'km²', '5.27', NULL, '工期自合同签订次日起30日历天');
INSERT INTO `cmc_contract_work` VALUES (2093, '1648881410160490777', '1:1000带状地形图测量', '1:1000', 'km²', '2.69', NULL, '合同签订之日起10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (2094, '1648881410160490777', '1:200横断面测量', '1:200', 'km²', '14.65 ', NULL, '合同签订之日起10日历天内完成。');
INSERT INTO `cmc_contract_work` VALUES (2095, '1648881410144669780', '控制测量', NULL, '点', '3', NULL, '测绘现场满足相关验收条件后同步进场施测。以双方书面确认的日期为开工日期。');
INSERT INTO `cmc_contract_work` VALUES (2096, '1648881410144669780', '1:500地形数据采集', NULL, 'm²', '27143.30', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2097, '1648881410144669780', '验测平面位置', NULL, '边', '2', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2098, '1648881410144669780', '验测高程、高度', NULL, '栋', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2099, '1648881410144669780', '规划面积测量', NULL, 'm²', '37572.84', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2100, '1648881410144669780', '地下管线测量', NULL, 'km', '8', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2101, '1648881410144669780', '人防竣工测量', NULL, 'm²', '9998.10', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2102, '1648881410144669780', '房产面积测量', NULL, 'm²', '37572.84', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2103, '1648881410141181829', '光伏场区域勘察', NULL, '项', '1', NULL, '技术要求详见合同第2.5条');
INSERT INTO `cmc_contract_work` VALUES (2104, '1648881410141181829', '核实光伏区场址用地拐点坐标', NULL, '项', '1', NULL, '技术要求详见合同第2.5条');
INSERT INTO `cmc_contract_work` VALUES (2105, '1648881410137848937', '测量标志普查', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2106, '1648881410137848937', '测量标志维护参照国家级测量标志保护方案和凉山州规自局测量标志保护的工作方案，对90座控制点进行分级分类。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2107, '1648881410137848937', '测量标志委托保管', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2108, '1648881410137848937', '汇总普查维护资料档案', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2109, '1648881410136853450', '稻城县文化放游资源普查', NULL, '项', '1', '2020-06-30', '工期约定详见合同第二条。');
INSERT INTO `cmc_contract_work` VALUES (2110, '1648881410136853450', '全域旅游总体规划编制', NULL, '项', '1', '2020-08-30', '工期约定详见合同第二条。');
INSERT INTO `cmc_contract_work` VALUES (2111, '1648881410136522882', '排水管线内窥检测：完成资阳市幸福西路剩余道路建设项目雨污水、排水管网内窥检测（内窥检测管线管径≥d300），探测到接市政管网的第一个检查井；内窥检测包括检查井、雨水口检查，排水口调查；配合完成整理资料。', NULL, 'm', '2000', NULL, '本项目工作地点、范围为资阳市幸福西路剩余道路建设项目管径D≥300的排水管网，具体范围以甲方指定为准。');
INSERT INTO `cmc_contract_work` VALUES (2112, '1648881410134677458', '四等GNSS测量', '四等', '点', '6', '2020-11-10', '下庄水电站');
INSERT INTO `cmc_contract_work` VALUES (2113, '1648881410134677458', '四等三角高程', '四等', 'km', '7.0', '2020-11-10', '下庄水电站');
INSERT INTO `cmc_contract_work` VALUES (2114, '1648881410134677458', '下庄水电站1:1000地形图测绘', '1:1000', 'km²', '1.25', '2020-11-10', '下庄水电站');
INSERT INTO `cmc_contract_work` VALUES (2115, '1648881410134677458', '四等GNSS测量', '四等', '点', '4', '2020-11-10', '茶园沟');
INSERT INTO `cmc_contract_work` VALUES (2116, '1648881410134677458', '沟口1:1000地形图测绘', '1:1000', 'km²', '0.05', '2020-11-10', '茶园沟');
INSERT INTO `cmc_contract_work` VALUES (2117, '1648881410134677458', '四等GNSS测量', '四等', '点', '4', '2020-11-10', '草坡水电站');
INSERT INTO `cmc_contract_work` VALUES (2118, '1648881410134677458', '四等三角高程', '四等', 'km', '4', '2020-11-10', '草坡水电站');
INSERT INTO `cmc_contract_work` VALUES (2119, '1648881410134677458', '草坡水电站1:1000地形图测绘', '1:1000', 'km²', '0.2', '2020-11-10', '草坡水电站');
INSERT INTO `cmc_contract_work` VALUES (2120, '1648881410131517581', '负责编制项目监理方案，并严格按方案进行监理。', NULL, NULL, NULL, NULL, '履约期限：投标供应商须在2023年12月31日前完成全部工作内容并向甲方提交全部监理成果。具体实施时间应符合上级部门要求。');
INSERT INTO `cmc_contract_work` VALUES (2121, '1648881410131517581', '熟悉合同条款、技术规范，审核作业单位提交的相关技术文件、拟派的项目人员资质和拟投入的设备，对项目实施全过程进行全面监督控制。', NULL, NULL, NULL, NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2122, '1648881410131517581', '对项目实施中出现的项目管理、安全、进度、质量等方面问题，须按合同及相关技术规范的要求及时提出处理意见，不定期或定期(至少每月一次)地向总监理负责人提交监理工作实施情况报告，对重大问题及时向总监理负责人汇报和请示。', NULL, NULL, NULL, NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2123, '1648881410131517581', '做好监理日志。核查作业单位质量自检工作及其运转情况。', NULL, NULL, NULL, NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2124, '1648881410131517581', '督促作业单位对使用设备进行校验、标定工作，以保证成果质量。 ', NULL, NULL, NULL, NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2125, '1648881410131517581', '采用旁站监理、巡视检查、成果质量抽查、质量控制记录审核等手段核查作业单位的成果质量。', NULL, NULL, NULL, NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2126, '1648881410131517581', '审核作业单位提交的最终成果，对成果的工作量和第三方质检报告进行分析，为项目成果计量及验收提供依据。', NULL, NULL, NULL, NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2127, '1648881410131517581', '负责填写监理日志、监理月报、监理报告和项目监理工作总结，完成监理成果资料整理和提交。', NULL, NULL, NULL, NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2128, '1648881410130524643', '方格网测量', NULL, '点', '27732', NULL, '工期：合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (2129, '1648881410130524643', '1:500横断面测量', '1:500', 'km', '14.4', NULL, '工期：合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (2130, '1648881410130524643', '1:500地形图测绘', '1:500', 'km²', '0.148', NULL, '工期：合同签订后20日历天内。');
INSERT INTO `cmc_contract_work` VALUES (2131, '1648881410126142724', '2020年西华段铁路沿线环境品质提升工程测绘项目', NULL, '项', '1', NULL, '本工程工期10日历天，具体进场时间以甲方通知为准，并按要求的时间交付全部测量成果资料。');
INSERT INTO `cmc_contract_work` VALUES (2132, '1648881410125467945', '彭州市湔江河谷生态旅游区片区（第4包）约XXX平方公里范围内新一轮1:500系列数字测绘产品生产工作', NULL, '项', '1', NULL, '具体工作内容如下：');
INSERT INTO `cmc_contract_work` VALUES (2133, '1648881410125467945', '数字线化图', NULL, 'km²', '36.37', NULL, '预估量');
INSERT INTO `cmc_contract_work` VALUES (2134, '1648881410125467945', '数字正射影像图', NULL, 'km²', '390.22', NULL, '预估量');
INSERT INTO `cmc_contract_work` VALUES (2135, '1648881410125467945', '实景三维模型', NULL, 'km²', NULL, NULL, '以项目实施实际产生工作量为准');
INSERT INTO `cmc_contract_work` VALUES (2136, '1648881410125467945', '数字高程模型', NULL, 'km²', NULL, NULL, '以项目实施实际产生工作量为准');
INSERT INTO `cmc_contract_work` VALUES (2137, '1648881410125372801', '基本农田补划方案编制', NULL, '项', '1', NULL, '资料收集与处理、完成天府大道北延线（新都区）基本农田补划方案编制。');
INSERT INTO `cmc_contract_work` VALUES (2138, '1648881410125372801', '基本农田补划方案听证', NULL, '项', '1', NULL, '协调配合新都规划和自然资源局组织政府相关部门及涉及乡镇村完成本项目基本农田补划方案的听证工作。');
INSERT INTO `cmc_contract_work` VALUES (2139, '1648881410125372801', '基本农田补划方案审查验收', NULL, '项', '1', NULL, '完成基本农田补划方案送主管部门审查并确保通过审查。');
INSERT INTO `cmc_contract_work` VALUES (2140, '1648881410125372801', '对规划实施影响评估和专家论证等工作。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2141, '1648881410124643515', '甲方划定的巴南区一品街道金田村环山公路规划区域范围为准开展1:500地形图测绘。', NULL, '项', '1', NULL, '甲乙双方合同签订同时，乙方组织人员进场全面开展工作，并于合同签订之日起5天内提交测绘成果。');
INSERT INTO `cmc_contract_work` VALUES (2142, '1648881410121267356', '石棉县孟获城景区规划用地202226号、202227号宗地1:500地形图测绘', '1:500', '亩', '300', '2022-04-07', NULL);
INSERT INTO `cmc_contract_work` VALUES (2143, '1648881410118749805', '飞行', NULL, '项', '1', '2020-07-30', '乙方及其派遣人员需在2020年7月30日完成甲方要求的工作内容。非因甲方原因延误工期的，工期不得顺延。');
INSERT INTO `cmc_contract_work` VALUES (2144, '1648881410118749805', '数据采集', NULL, 'km²', '100', '2020-07-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (2145, '1648881410118749805', '激光点云数据处理、分类', NULL, 'km²', '100', '2020-07-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (2146, '1648881410118749805', '正射影像图制作', NULL, 'km²', '100', '2020-07-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (2147, '1648881410118749805', '1：2000地形图制作', '1:2000', 'km²', '75', '2020-07-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (2148, '1648881410118132314', '收集整理权属资料', NULL, '户', '33200', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2149, '1648881410118132314', '权籍调查：对中标镇（街道）范围内所有宅基地和集体建设用地上构、建筑物开展不动产测绘、权属调查', NULL, '户', '33200', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2150, '1648881410118132314', '登记信息、数据、资料等录入权调系统和登记系统', NULL, '户', '33200', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2151, '1648881410118132314', '缮证', NULL, '户', '33200', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2152, '1648881410118132314', '建立不动产数据库', NULL, '户', '33200', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2153, '1648881410118132314', '项目成果质量检查', NULL, '户', '33200', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2154, '1648881410116992716', '根据甲方要求布置勘探点布置要求及深度完成项目初步勘察；', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2155, '1648881410116992716', '完成响应区域1:500地形图（含水下）', '1:500', 'km²', '0.01', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2156, '1648881410116992716', '1:1000地形图（含水下）', '1:1000', 'km²', '4.08', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2157, '1648881410115357569', '南网数研院航飞影像服务建设：包1 粤北（河源、韶关、清远、肇庆）项目提供专业技术服务', NULL, '项', '1', NULL, '合同签订后一个月内提交成果。工作内容及要求详见附件：南网数研院航飞影像服务建设项目技术协议书');
INSERT INTO `cmc_contract_work` VALUES (2158, '1648881410114745619', '五等GNSS测量', '五等', '点', '8', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2159, '1648881410114745619', '四等高程测量', '四等', 'km', '20', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2160, '1648881410114745619', '1:2000地形图测绘', '1:2000', 'km²', '6.7', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2161, '1648881410114745619', '定点测量', NULL, '组日', '2', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2162, '1648881410113168220', '完成重庆市江津区团结湖大数据智能产业园 PPP 项目第三方监控量测', NULL, '项', '1', NULL, '详见合同第二条工作内容。基坑：施工期36个月(暂定);边坡：施工期36个月(暂定),运营期24个月。具体以实际施工期为准且满足项目实际需要确定。');
INSERT INTO `cmc_contract_work` VALUES (2163, '1648881410107603516', 'JW梯级电站建设征地扣除水域的土地面积约为10万亩，耕园地约3万亩，林草地约7万亩，需对上述土地开展测量工作。', NULL, '项', '1', NULL, '合同签订后，90日内提供实物指标土地、零星树木及相关附属设施调查的初步成果资料；');
INSERT INTO `cmc_contract_work` VALUES (2164, '1648881410107603516', '行政界线、权属界线实地测量，制作调查范围内的行政范围图；', NULL, '项', '1', NULL, '合同签订后，120日内提供实物指标土地、零星树木及相关附属设施调查的最终成果资料并现场通过甲方验收及移交。');
INSERT INTO `cmc_contract_work` VALUES (2165, '1648881410107603516', '耕地、园地、草地、林地等实地指认边界、确认土地利用类型，将各地块分解到户；', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2166, '1648881410107603516', '其它地类图斑（未利用地、交通运输用地、设施农用地、内陆滩涂等）确定土地权属及用地性质，按相关要求登记；', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2167, '1648881410107603516', '零星树木调查登记；土地附属设施（铁丝网、蔬菜大棚、牲畜棚、围墙、水池等）调查登记；', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2168, '1648881410107603516', '录入电子表格数据及成果数据汇总等；调查的各类图斑与三调、永久基本农田、林地一张图等数据叠加分析，按要求进行成果资料的整理；', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2169, '1648881410107603516', '汇总及报表分析，成果数据入库。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2170, '1648881410107603516', '甲方要求的与土地调查相关的其他工作。', NULL, '项', '1', NULL, NULL);
INSERT INTO `cmc_contract_work` VALUES (2171, '1648881410107254972', '在2021年度国土变更调查成果基础上，按照《四川省国土变更调查日常变更实施方案（试行）》（详见川自然资办发〔2022〕410 号通知附件）要求，开展日常变更调查工作。', NULL, '项', '1', NULL, '合同签订后1年内完成。如果部省另有时间安排，以部省最新的时间安排为准。');
INSERT INTO `cmc_contract_work` VALUES (2172, '1648881410107254972', '在2021年度国土变更调查成果基础上，分析本年度县级耕地流出情况，提取并下发耕地恢复整治线索图斑，并对各镇（街）恢复整改情况，开展恢复耕地专项调查。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2173, '1648881410107254972', '在部下发的2022年度正射影像图基础上，叠加监测图斑、管理数据和其他相关数据，制作泸县2022年度国土变更调查工作底图（以下简称“工作底图”）。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2174, '1648881410107254972', '土地利用现状变化调查，以实地现状认定地类为原则，对工作底图开展全图斑调查。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2175, '1648881410107254972', '利用“天府调查云”2022年度变更调查举证模块进行实地外业举证，调查时使用带卫星定位和方向传感器的设备，利用“互联网+”举证软件，对需举证的图斑地块拍摄包含图斑坐标、拍摄方位角、拍摄时间、实地照片及举证说明等综合信息，形成加密举证数据包，上传至全省统一的举证平台。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2176, '1648881410107254972', '城镇村庄内部细化调查。充分利用地籍调查和不动产登记成果，开展 2022 年度变更调查城镇村庄内部土地利用现状调查。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2177, '1648881410107254972', '调查权属界线变化补充调查。根据日常确权登记工作掌握的权属变化情况，开展 2022 年度变更调查权属更新，包括集体土地所有权和国有土地使用权的权属性质变化、权属界线变化和权属单位名称变化。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2178, '1648881410107254972', '更新耕地图斑坡度级和田坎系数。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2179, '1648881410107254972', '更新 2022 年度变更调查数据库。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2180, '1648881410107254972', '配合开展国家级核查和数据库质检入库。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2181, '1648881410107254972', '调查成果分析评价。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2182, '1648881410107254972', '2022 年度耕地资源质量分类成果更新与监测。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2183, '1648881410107254972', '部省市要求的关于2022年度国土变更调查除以上内容之外的相关工作。', NULL, '项', '1', NULL, '同上');
INSERT INTO `cmc_contract_work` VALUES (2184, '1648881410103478283', '乙方在2023年7月1日至2024年6月30日期间承接甲方指派的测绘项目技术服务工作:具体工作内容、工作量及工期等甲方在单项工程《任务通知书》中明确。', NULL, NULL, NULL, '2024-06-30', NULL);
INSERT INTO `cmc_contract_work` VALUES (2185, '1648881410101329320', '线路定测：中桩、横断面测量。', NULL, '项', '1', NULL, '对甲方提供的线路图及测量范围按照甲方要求的比例进行地形测量。开工日期：接到甲方通知进场。竣工日期：按照甲方要求完成相应工作。');

-- ----------------------------
-- 38、cmc结算单价表
-- ----------------------------
drop table if exists `cmc_price`;
create table `cmc_price`  (
  `id` 					int not null auto_increment 	comment '结算单价id',
  `work_type` 			varchar(50)  	default null 	comment '工作类别',
  `work_item` 			varchar(50)  	default null 	comment '工作内容',
  `sub_item` 			varchar(50)  	default null 	comment '内容细项',
  `price_percentage` 	varchar(10)  	default null 	comment '单价比例',
  `scale_grade` 		varchar(20)  	default null 	comment '等级或比例尺',
  `unit` 				varchar(10)		default null 	comment '单位',
  `common_price` 		decimal(10,2)	default null 	comment '一般地类单价',
  `complex_price` 		decimal(10,2)	default null 	comment '复杂地类单价',
  primary key (`id`)
) engine = innodb comment = 'cmc结算单价表';

-- ----------------------------
-- 初始化-结算单价表数据
-- ----------------------------
INSERT INTO `cmc_price` VALUES (1, '外业-GNSS、控制网测量', 'GNSS、边角网测量', NULL, NULL, '一', '点', 1150.00, 1400.00);
INSERT INTO `cmc_price` VALUES (2, '外业-GNSS、控制网测量', 'GNSS、边角网测量', NULL, NULL, '二', '点', 730.00, 870.00);
INSERT INTO `cmc_price` VALUES (3, '外业-GNSS、控制网测量', 'GNSS、边角网测量', NULL, NULL, '三', '点', 660.00, 770.00);
INSERT INTO `cmc_price` VALUES (4, '外业-GNSS、控制网测量', 'GNSS、边角网测量', NULL, NULL, '四', '点', 500.00, 580.00);
INSERT INTO `cmc_price` VALUES (5, '外业-GNSS、控制网测量', 'GNSS、边角网测量', NULL, NULL, '五', '点', 190.00, 200.00);
INSERT INTO `cmc_price` VALUES (6, '外业-GNSS、控制网测量', 'GNSS、边角网测量、利用旧点', NULL, NULL, '一', '点', 690.00, 840.00);
INSERT INTO `cmc_price` VALUES (7, '外业-GNSS、控制网测量', 'GNSS、边角网测量、利用旧点', NULL, NULL, '二', '点', 438.00, 522.00);
INSERT INTO `cmc_price` VALUES (8, '外业-GNSS、控制网测量', 'GNSS、边角网测量、利用旧点', NULL, NULL, '三', '点', 396.00, 462.00);
INSERT INTO `cmc_price` VALUES (9, '外业-GNSS、控制网测量', 'GNSS、边角网测量、利用旧点', NULL, NULL, '四', '点', 300.00, 348.00);
INSERT INTO `cmc_price` VALUES (10, '外业-GNSS、控制网测量', 'GNSS、边角网测量、利用旧点', NULL, NULL, '五', '点', 114.00, 120.00);
INSERT INTO `cmc_price` VALUES (11, '外业-GNSS、控制网测量', 'GNSS增加一倍观测时间', NULL, NULL, '一', '点', 1495.00, 1820.00);
INSERT INTO `cmc_price` VALUES (12, '外业-GNSS、控制网测量', 'GNSS增加一倍观测时间', NULL, NULL, '二', '点', 949.00, 1131.00);
INSERT INTO `cmc_price` VALUES (13, '外业-GNSS、控制网测量', 'GNSS增加一倍观测时间、利用旧点', NULL, NULL, '一', '点', 897.00, 1092.00);
INSERT INTO `cmc_price` VALUES (14, '外业-GNSS、控制网测量', 'GNSS增加一倍观测时间、利用旧点', NULL, NULL, '二', '点', 569.40, 678.60);
INSERT INTO `cmc_price` VALUES (15, '外业-导线测量', '导线测量', NULL, NULL, '二', 'km', 340.00, 400.00);
INSERT INTO `cmc_price` VALUES (16, '外业-导线测量', '导线测量', NULL, NULL, '三', 'km', 260.00, 290.00);
INSERT INTO `cmc_price` VALUES (17, '外业-导线测量', '导线测量', NULL, NULL, '四', 'km', 260.00, 290.00);
INSERT INTO `cmc_price` VALUES (18, '外业-导线测量', '导线测量', NULL, NULL, '五', 'km', 200.00, 220.00);
INSERT INTO `cmc_price` VALUES (19, '外业-导线测量', '导线测量、三等单程双测高程', NULL, NULL, '二', 'km', 544.00, 640.00);
INSERT INTO `cmc_price` VALUES (20, '外业-导线测量', '导线测量、三等单程双测高程', NULL, NULL, '三', 'km', 416.00, 464.00);
INSERT INTO `cmc_price` VALUES (21, '外业-导线测量', '导线测量、三等单程双测高程', NULL, NULL, '四', 'km', 416.00, 464.00);
INSERT INTO `cmc_price` VALUES (22, '外业-导线测量', '导线测量、三等单程双测高程', NULL, NULL, '五', 'km', 320.00, 352.00);
INSERT INTO `cmc_price` VALUES (23, '外业-导线测量', '导线测量、四等高程', NULL, NULL, '二', 'km', 442.00, 520.00);
INSERT INTO `cmc_price` VALUES (24, '外业-导线测量', '导线测量、四等高程', NULL, NULL, '三', 'km', 338.00, 377.00);
INSERT INTO `cmc_price` VALUES (25, '外业-导线测量', '导线测量、四等高程', NULL, NULL, '四', 'km', 338.00, 377.00);
INSERT INTO `cmc_price` VALUES (26, '外业-导线测量', '导线测量、四等高程', NULL, NULL, '五', 'km', 260.00, 286.00);
INSERT INTO `cmc_price` VALUES (27, '外业-地形图测绘', '地形图外业实测', NULL, NULL, '1:200', 'km²', 34000.00, 40000.00);
INSERT INTO `cmc_price` VALUES (28, '外业-地形图测绘', '地形图外业实测', NULL, NULL, '1:500', 'km²', 17000.00, 20000.00);
INSERT INTO `cmc_price` VALUES (29, '外业-地形图测绘', '地形图外业实测', NULL, NULL, '1:1000', 'km²', 6300.00, 7600.00);
INSERT INTO `cmc_price` VALUES (30, '外业-地形图测绘', '地形图外业实测', NULL, NULL, '1:2000', 'km²', 3000.00, 3600.00);
INSERT INTO `cmc_price` VALUES (31, '外业-地形图测绘', '地形图外业实测', NULL, NULL, '1:5000', 'km²', 900.00, 1100.00);
INSERT INTO `cmc_price` VALUES (32, '外业-地形图测绘', '地形图外业实测', NULL, NULL, '1:10000', 'km²', 420.00, 510.00);
INSERT INTO `cmc_price` VALUES (33, '外业-地形图测绘', '地形图(无人机)测绘', NULL, NULL, '1:200', 'km²', 15300.00, 18000.00);
INSERT INTO `cmc_price` VALUES (34, '外业-地形图测绘', '地形图(无人机)测绘', NULL, NULL, '1:500', 'km²', 7650.00, 9000.00);
INSERT INTO `cmc_price` VALUES (35, '外业-地形图测绘', '地形图(无人机)测绘', NULL, NULL, '1:1000', 'km²', 2835.00, 3420.00);
INSERT INTO `cmc_price` VALUES (36, '外业-地形图测绘', '地形图(无人机)测绘', NULL, NULL, '1:2000', 'km²', 1350.00, 1620.00);
INSERT INTO `cmc_price` VALUES (37, '外业-地形图测绘', '地形图(无人机)测绘', NULL, NULL, '1:5000', 'km²', 405.00, 495.00);
INSERT INTO `cmc_price` VALUES (38, '外业-地形图测绘', '地形图(无人机)测绘', NULL, NULL, '1:10000', 'km²', 189.00, 229.50);
INSERT INTO `cmc_price` VALUES (39, '外业-地形图测绘', '地形图(航片、卫片)测绘', NULL, NULL, '1:200', 'km²', 13600.00, 16000.00);
INSERT INTO `cmc_price` VALUES (40, '外业-地形图测绘', '地形图(航片、卫片)测绘', NULL, NULL, '1:500', 'km²', 6800.00, 8000.00);
INSERT INTO `cmc_price` VALUES (41, '外业-地形图测绘', '地形图(航片、卫片)测绘', NULL, NULL, '1:1000', 'km²', 2520.00, 3040.00);
INSERT INTO `cmc_price` VALUES (42, '外业-地形图测绘', '地形图(航片、卫片)测绘', NULL, NULL, '1:2000', 'km²', 1200.00, 1440.00);
INSERT INTO `cmc_price` VALUES (43, '外业-地形图测绘', '地形图(航片、卫片)测绘', NULL, NULL, '1:5000', 'km²', 360.00, 440.00);
INSERT INTO `cmc_price` VALUES (44, '外业-地形图测绘', '地形图(航片、卫片)测绘', NULL, NULL, '1:10000', 'km²', 168.00, 204.00);
INSERT INTO `cmc_price` VALUES (45, '外业-地形图测绘', '地形图(激光)测绘', NULL, NULL, '1:200', 'km²', 6800.00, 8000.00);
INSERT INTO `cmc_price` VALUES (46, '外业-地形图测绘', '地形图(激光)测绘', NULL, NULL, '1:500', 'km²', 3400.00, 4000.00);
INSERT INTO `cmc_price` VALUES (47, '外业-地形图测绘', '地形图(激光)测绘', NULL, NULL, '1:1000', 'km²', 1260.00, 1520.00);
INSERT INTO `cmc_price` VALUES (48, '外业-地形图测绘', '地形图(激光)测绘', NULL, NULL, '1:2000', 'km²', 600.00, 720.00);
INSERT INTO `cmc_price` VALUES (49, '外业-地形图测绘', '地形图(激光)测绘', NULL, NULL, '1:5000', 'km²', 180.00, 220.00);
INSERT INTO `cmc_price` VALUES (50, '外业-地形图测绘', '地形图(激光)测绘', NULL, NULL, '1:10000', 'km²', 84.00, 102.00);
INSERT INTO `cmc_price` VALUES (51, '外业-断面测量', '断面测量', NULL, NULL, '断面基点', '点', 90.00, 100.00);
INSERT INTO `cmc_price` VALUES (52, '外业-断面测量', '断面测量', NULL, NULL, '1:200', 'km', 880.00, 1060.00);
INSERT INTO `cmc_price` VALUES (53, '外业-断面测量', '断面测量', NULL, NULL, '1:500', 'km', 700.00, 850.00);
INSERT INTO `cmc_price` VALUES (54, '外业-断面测量', '断面测量', NULL, NULL, '1:1000', 'km', 570.00, 690.00);
INSERT INTO `cmc_price` VALUES (55, '外业-断面测量', '断面测量', NULL, NULL, '1:2000', 'km', 220.00, 260.00);
INSERT INTO `cmc_price` VALUES (56, '外业-断面测量', '断面测量', NULL, NULL, '1:5000', 'km', 190.00, 230.00);
INSERT INTO `cmc_price` VALUES (57, '外业-断面测量', '断面测量', NULL, NULL, '1:10000', 'km', 170.00, 210.00);
INSERT INTO `cmc_price` VALUES (58, '外业-断面测量', '界桩测设', NULL, NULL, '无', '点', 110.00, 120.00);
INSERT INTO `cmc_price` VALUES (59, '外业-高程测量', '水准测量', NULL, NULL, '一', 'km', 580.00, 650.00);
INSERT INTO `cmc_price` VALUES (60, '外业-高程测量', '水准测量', NULL, NULL, '二', 'km', 420.00, 480.00);
INSERT INTO `cmc_price` VALUES (61, '外业-高程测量', '水准测量', NULL, NULL, '三', 'km', 210.00, 240.00);
INSERT INTO `cmc_price` VALUES (62, '外业-高程测量', '水准测量', NULL, NULL, '四', 'km', 180.00, 210.00);
INSERT INTO `cmc_price` VALUES (63, '外业-高程测量', '水准测量(爬山、洞内）', NULL, NULL, '一', 'km', 580.00, 650.00);
INSERT INTO `cmc_price` VALUES (64, '外业-高程测量', '水准测量(爬山、洞内）', NULL, NULL, '二', 'km', 420.00, 480.00);
INSERT INTO `cmc_price` VALUES (65, '外业-高程测量', '水准测量(爬山、洞内）', NULL, NULL, '三', 'km', 300.00, 330.00);
INSERT INTO `cmc_price` VALUES (66, '外业-高程测量', '水准测量(爬山、洞内）', NULL, NULL, '四', 'km', 180.00, 210.00);
INSERT INTO `cmc_price` VALUES (67, '外业-高程测量', '跨河水准（500m以内）', NULL, NULL, '一', '处', 2050.00, 2050.00);
INSERT INTO `cmc_price` VALUES (68, '外业-高程测量', '跨河水准（500m以内）', NULL, NULL, '二', '处', 1730.00, 1730.00);
INSERT INTO `cmc_price` VALUES (69, '外业-高程测量', '跨河水准（501-999m）', NULL, NULL, '一', '处', 2690.00, 2690.00);
INSERT INTO `cmc_price` VALUES (70, '外业-高程测量', '跨河水准（501-999m）', NULL, NULL, '二', '处', 2280.00, 2280.00);
INSERT INTO `cmc_price` VALUES (71, '外业-高程测量', '跨河水准（大于1000m）', NULL, NULL, '一', '处', 4035.00, 4035.00);
INSERT INTO `cmc_price` VALUES (72, '外业-高程测量', '跨河水准（大于1000m）', NULL, NULL, '二', '处', 3420.00, 3420.00);
INSERT INTO `cmc_price` VALUES (73, '外业-高程测量', '三角高程测量', NULL, NULL, '三', 'km', 210.00, 231.00);
INSERT INTO `cmc_price` VALUES (74, '外业-高程测量', '三角高程测量', NULL, NULL, '四', 'km', 126.00, 147.00);
INSERT INTO `cmc_price` VALUES (75, '外业-高程测量', '三角高程测量、单程双测', NULL, NULL, '三', 'km', 294.00, 323.40);
INSERT INTO `cmc_price` VALUES (76, '外业-高程测量', '三角高程测量、单程双测', NULL, NULL, '四', 'km', 176.40, 205.80);
INSERT INTO `cmc_price` VALUES (77, '外业-公路测量', '公路控制网点土建', NULL, NULL, '三、四等', '点', 150.00, 180.00);
INSERT INTO `cmc_price` VALUES (78, '外业-公路测量', '公路控制网点土建', NULL, NULL, '五等、一级', '点', 100.00, 120.00);
INSERT INTO `cmc_price` VALUES (79, '外业-公路测量', '公路中桩、角桩测设', NULL, NULL, '无', '点', 18.00, 20.00);
INSERT INTO `cmc_price` VALUES (80, '外业-公路测量', '公路参考点测量', NULL, NULL, '无', '点', 3.60, 4.00);
INSERT INTO `cmc_price` VALUES (81, '外业-航飞', '无人机航飞(飞行项目）', NULL, NULL, '无', '人天', 500.00, 500.00);
INSERT INTO `cmc_price` VALUES (82, '外业-激光数据采集', '外业激光数据采集(AS-1300HL)', NULL, NULL, '无', '人天', 500.00, 500.00);
INSERT INTO `cmc_price` VALUES (83, '外业-其他', '配合测量', NULL, NULL, '无', '人天', 430.00, 480.00);
INSERT INTO `cmc_price` VALUES (84, '外业-其他', '进出场', NULL, NULL, '无', '人天', 300.00, 330.00);
INSERT INTO `cmc_price` VALUES (85, '外业-施控网土建', '观测墩选埋', NULL, NULL, '无', '点', 1800.00, 2000.00);
INSERT INTO `cmc_price` VALUES (86, '外业-施控网土建', '水准基点选埋', NULL, NULL, '无', '点', 600.00, 800.00);
INSERT INTO `cmc_price` VALUES (87, '外业-施控网土建', '平面点选埋', NULL, NULL, '无', '点', 300.00, 400.00);
INSERT INTO `cmc_price` VALUES (88, '外业-施控网土建', '水准点选埋', NULL, NULL, '无', '点', 400.00, 400.00);
INSERT INTO `cmc_price` VALUES (89, '内业-DEM、地形面', 'DEM、三维地形面制作', NULL, NULL, '1:200', 'km²', 3800.00, 4400.00);
INSERT INTO `cmc_price` VALUES (90, '内业-DEM、地形面', 'DEM、三维地形面制作', NULL, NULL, '1:500', 'km²', 1100.00, 1300.00);
INSERT INTO `cmc_price` VALUES (91, '内业-DEM、地形面', 'DEM、三维地形面制作', NULL, NULL, '1:1000', 'km²', 450.00, 500.00);
INSERT INTO `cmc_price` VALUES (92, '内业-DEM、地形面', 'DEM、三维地形面制作', NULL, NULL, '1:2000', 'km²', 200.00, 260.00);
INSERT INTO `cmc_price` VALUES (93, '内业-DEM、地形面', 'DEM、三维地形面制作', NULL, NULL, '1:5000', 'km²', 70.00, 75.00);
INSERT INTO `cmc_price` VALUES (94, '内业-DEM、地形面', 'DEM、三维地形面制作', NULL, NULL, '1:10000', 'km²', 30.00, 35.00);
INSERT INTO `cmc_price` VALUES (95, '内业-DOM', 'DOM制作', NULL, NULL, '1:200', 'km²', 2500.00, 2900.00);
INSERT INTO `cmc_price` VALUES (96, '内业-DOM', 'DOM制作', NULL, NULL, '1:500', 'km²', 750.00, 880.00);
INSERT INTO `cmc_price` VALUES (97, '内业-DOM', 'DOM制作', NULL, NULL, '1:1000', 'km²', 300.00, 350.00);
INSERT INTO `cmc_price` VALUES (98, '内业-DOM', 'DOM制作', NULL, NULL, '1:2000', 'km²', 150.00, 170.00);
INSERT INTO `cmc_price` VALUES (99, '内业-DOM', 'DOM制作', NULL, NULL, '1:5000', 'km²', 50.00, 55.00);
INSERT INTO `cmc_price` VALUES (100, '内业-DOM', 'DOM制作', NULL, NULL, '1:10000', 'km²', 20.00, 25.00);
INSERT INTO `cmc_price` VALUES (101, '内业-比例尺缩放', '地形图比例尺缩放', NULL, NULL, '1:200', 'km²', 5173.00, 8868.00);
INSERT INTO `cmc_price` VALUES (102, '内业-比例尺缩放', '地形图比例尺缩放', NULL, NULL, '1:500', 'km²', 1316.00, 2256.00);
INSERT INTO `cmc_price` VALUES (103, '内业-比例尺缩放', '地形图比例尺缩放', NULL, NULL, '1:1000', 'km²', 462.00, 792.00);
INSERT INTO `cmc_price` VALUES (104, '内业-比例尺缩放', '地形图比例尺缩放', NULL, NULL, '1:2000', 'km²', 164.50, 282.00);
INSERT INTO `cmc_price` VALUES (105, '内业-比例尺缩放', '地形图比例尺缩放', NULL, NULL, '1:5000', 'km²', 42.00, 72.00);
INSERT INTO `cmc_price` VALUES (106, '内业-比例尺缩放', '地形图比例尺缩放', NULL, NULL, '1:10000', 'km²', 14.00, 24.00);
INSERT INTO `cmc_price` VALUES (107, '内业-编图', '地形图数字化', NULL, NULL, '1:200', 'km²', 7390.00, 8625.00);
INSERT INTO `cmc_price` VALUES (108, '内业-编图', '地形图数字化', NULL, NULL, '1:500', 'km²', 1880.00, 2210.00);
INSERT INTO `cmc_price` VALUES (109, '内业-编图', '地形图数字化', NULL, NULL, '1:1000', 'km²', 660.00, 780.00);
INSERT INTO `cmc_price` VALUES (110, '内业-编图', '地形图数字化', NULL, NULL, '1:2000', 'km²', 235.00, 275.00);
INSERT INTO `cmc_price` VALUES (111, '内业-编图', '地形图数字化', NULL, NULL, '1:5000', 'km²', 60.00, 70.00);
INSERT INTO `cmc_price` VALUES (112, '内业-编图', '地形图数字化', NULL, NULL, '1:10000', 'km²', 20.00, 25.00);
INSERT INTO `cmc_price` VALUES (113, '内业-点云分类', '激光点云分类', NULL, NULL, '1:200', 'km²', 1200.00, 1560.00);
INSERT INTO `cmc_price` VALUES (114, '内业-点云分类', '激光点云分类', NULL, NULL, '1:500', 'km²', 600.00, 780.00);
INSERT INTO `cmc_price` VALUES (115, '内业-点云分类', '激光点云分类', NULL, NULL, '1:1000', 'km²', 300.00, 390.00);
INSERT INTO `cmc_price` VALUES (116, '内业-点云分类', '激光点云分类', NULL, NULL, '1:2000', 'km²', 200.00, 260.00);
INSERT INTO `cmc_price` VALUES (117, '内业-点云分类', '激光点云分类', NULL, NULL, '1:5000', 'km²', 110.00, 130.00);
INSERT INTO `cmc_price` VALUES (118, '内业-点云分类', '激光点云分类', NULL, NULL, '1:10000', 'km²', 60.00, 70.00);
INSERT INTO `cmc_price` VALUES (119, '内业-航测', '地形图航测', NULL, NULL, '1:200', 'km²', 6580.00, 7700.00);
INSERT INTO `cmc_price` VALUES (120, '内业-航测', '地形图航测', NULL, NULL, '1:500', 'km²', 3500.00, 4200.00);
INSERT INTO `cmc_price` VALUES (121, '内业-航测', '地形图航测', NULL, NULL, '1:1000', 'km²', 1800.00, 2100.00);
INSERT INTO `cmc_price` VALUES (122, '内业-航测', '地形图航测', NULL, NULL, '1:2000', 'km²', 750.00, 900.00);
INSERT INTO `cmc_price` VALUES (123, '内业-航测', '地形图航测', NULL, NULL, '1:5000', 'km²', 220.00, 260.00);
INSERT INTO `cmc_price` VALUES (124, '内业-航测', '地形图航测', NULL, NULL, '1:10000', 'km²', 100.00, 120.00);
INSERT INTO `cmc_price` VALUES (125, '内业-激光数据预处理', '机载激光数据预处理', NULL, NULL, '1:200', 'km²', 300.00, 390.00);
INSERT INTO `cmc_price` VALUES (126, '内业-激光数据预处理', '机载激光数据预处理', NULL, NULL, '1:500', 'km²', 150.00, 195.00);
INSERT INTO `cmc_price` VALUES (127, '内业-激光数据预处理', '机载激光数据预处理', NULL, NULL, '1:1000', 'km²', 75.00, 97.50);
INSERT INTO `cmc_price` VALUES (128, '内业-激光数据预处理', '机载激光数据预处理', NULL, NULL, '1:2000', 'km²', 50.00, 65.00);
INSERT INTO `cmc_price` VALUES (129, '内业-激光数据预处理', '机载激光数据预处理', NULL, NULL, '1:5000', 'km²', 27.50, 32.50);
INSERT INTO `cmc_price` VALUES (130, '内业-激光数据预处理', '机载激光数据预处理', NULL, NULL, '1:10000', 'km²', 15.00, 17.50);
INSERT INTO `cmc_price` VALUES (131, '内业-激光数据预处理', '车载、手持激光数据预处理', NULL, NULL, '1:200', 'km²', 420.00, 546.00);
INSERT INTO `cmc_price` VALUES (132, '内业-激光数据预处理', '车载、手持激光数据预处理', NULL, NULL, '1:500', 'km²', 210.00, 273.00);
INSERT INTO `cmc_price` VALUES (133, '内业-激光数据预处理', '车载、手持激光数据预处理', NULL, NULL, '1:1000', 'km²', 105.00, 136.50);
INSERT INTO `cmc_price` VALUES (134, '内业-激光数据预处理', '车载、手持激光数据预处理', NULL, NULL, '1:2000', 'km²', 70.00, 91.00);
INSERT INTO `cmc_price` VALUES (135, '内业-激光数据预处理', '车载、手持激光数据预处理', NULL, NULL, '1:5000', 'km²', 38.50, 45.50);
INSERT INTO `cmc_price` VALUES (136, '内业-激光数据预处理', '车载、手持激光数据预处理', NULL, NULL, '1:10000', 'km²', 21.00, 24.50);
INSERT INTO `cmc_price` VALUES (137, '内业-激光制图', '激光数据制作地形图', NULL, NULL, '1:200', 'km²', 8800.00, 10500.00);
INSERT INTO `cmc_price` VALUES (138, '内业-激光制图', '激光数据制作地形图', NULL, NULL, '1:500', 'km²', 2750.00, 3310.00);
INSERT INTO `cmc_price` VALUES (139, '内业-激光制图', '激光数据制作地形图', NULL, NULL, '1:1000', 'km²', 1180.00, 1400.00);
INSERT INTO `cmc_price` VALUES (140, '内业-激光制图', '激光数据制作地形图', NULL, NULL, '1:2000', 'km²', 620.00, 740.00);
INSERT INTO `cmc_price` VALUES (141, '内业-激光制图', '激光数据制作地形图', NULL, NULL, '1:5000', 'km²', 240.00, 280.00);
INSERT INTO `cmc_price` VALUES (142, '内业-激光制图', '激光数据制作地形图', NULL, NULL, '1:10000', 'km²', 130.00, 150.00);
INSERT INTO `cmc_price` VALUES (143, '内业-三维模型', '实景三维模型制作', NULL, NULL, 'GSD ≤2.9cm', 'km²', 260.00, 260.00);
INSERT INTO `cmc_price` VALUES (144, '内业-三维模型', '实景三维模型制作', NULL, NULL, 'GSD 3cm～4.9cm', 'km²', 175.00, 175.00);
INSERT INTO `cmc_price` VALUES (145, '内业-三维模型', '实景三维模型制作', NULL, NULL, 'GSD 5cm～9.9cm', 'km²', 90.00, 90.00);
INSERT INTO `cmc_price` VALUES (146, '内业-三维模型', '实景三维模型制作', NULL, NULL, 'GSD 10cm～20cm', 'km²', 38.00, 38.00);
INSERT INTO `cmc_price` VALUES (147, '内业-坐标转换', '坐标系转换', NULL, NULL, '无', '工天', 210.00, 210.00);
INSERT INTO `cmc_price` VALUES (148, '内业-电子沙盘', '电子沙盘制作', NULL, NULL, '无', '工天', 210.00, 210.00);
INSERT INTO `cmc_price` VALUES (149, '其他', '按天计算', NULL, NULL, '无', '天', 100.00, 100.00);
INSERT INTO `cmc_price` VALUES (150, '其他', '按项计算', NULL, NULL, '无', '项', 100.00, 100.00);

-- ----------------------------
-- 39、cmc预算管理表
-- ----------------------------
drop table if exists `cmc_budget`;
create table `cmc_budget`  (
  `budget_id` 			char(19) 		not null		comment '预算id',
  `project_id` 			char(19) 		default null 	comment '项目id',
  `staff_cost` 			decimal(10, 2) 	default null 	comment '人员成本',
  `car_cost` 			decimal(10, 2) 	default null 	comment '车辆成本',
  `device_cost` 		decimal(10, 2) 	default null 	comment '设备成本',
  `fix_cost` 			decimal(10, 2) 	default null 	comment '间接成本',
  `settle_expense` 		decimal(10, 2) 	default null 	comment '预结算额',
  `out_expense` 		decimal(10, 2) 	default null 	comment '外协费用',
  `business_expense` 	decimal(10, 2) 	default null 	comment '经营费用',
  `tax_expense` 		decimal(10, 2) 	default null 	comment '税费成本',
  `rent_expense` 		decimal(10, 2) 	default null 	comment '车船租赁',
  `other_expense` 		decimal(10, 2) 	default null 	comment '其他费用',
  `out_remark` 			varchar(255) 	default null 	comment '外协费用备注',
  `business_remark` 	varchar(255) 	default null 	comment '经营管理备注',
  `tax_remark` 			varchar(255) 	default null 	comment '税费成本备注',
  `rent_remark` 		varchar(255) 	default null 	comment '车船租赁备注',
  `other_remark` 		varchar(255) 	default null 	comment '其他费用备注',
  `direct_expense` 		decimal(10, 2) 	default null 	comment '直接成本',
  `total_budget` 		decimal(10, 2) 	default null 	comment '预算总额',
  `compiler` 			bigint 			default null 	comment '编制人',
  `manager` 			bigint 			default null 	comment '分管审核人',
  `auditor` 			bigint 			default null 	comment '总经理',
  `approver` 			bigint 			default null 	comment '董事长',
  `manager_comment` 	varchar(255)	default null 	comment '分管审核意见',
  `zjl_comment` 		varchar(255)	default null 	comment '总经理审批意见',
  `dsz_comment` 		varchar(255)	default null 	comment '董事长批准意见',
  `create_time` 		date 			default null 	comment '创建时间',
  `manager_time` 		date 			default null 	comment '分管审核时间',
  `zjl_time` 			date			default null 	comment '总经理审批时间',
  `dsz_time` 			date			default null 	comment '董事长批准时间',
  primary key (`budget_id`)
) engine = innodb comment = 'cmc预算管理表';

-- ----------------------------
-- 初始化-预算管理表数据
-- ----------------------------

-- ----------------------------
-- 40、cmc车辆预算表
-- ----------------------------
drop table if exists `cmc_budget_car`;
create table `cmc_budget_car`  (
  `budget_car_id` 	bigint not null  auto_increment comment '车辆预算id',
  `budget_id` 		char(19) 		default null comment '预算id',
  `car_id` 			int 			default null comment '车辆id',
  `days` 			int 			default null comment '天数',
  `depreciation` 	decimal(10, 2) 	default null comment '折旧成本',
  `distance` 		double 			default null comment '距离',
  `mileage` 		decimal(10, 2) 	default null comment '油耗',
  `expense` 		decimal(10, 2) 	default null comment '使用成本',
  `remark` 			varchar(255) 	default null comment '备注',
  primary key (`budget_car_id`)
) engine = innodb comment = 'cmc车辆预算表';

-- ----------------------------
-- 初始化-车辆预算表数据
-- ----------------------------

-- ----------------------------
-- 41、cmc设备预算表
-- ----------------------------
drop table if exists `cmc_budget_device`;
create table `cmc_budget_device`  (
  `budget_device_id` 	bigint not null  auto_increment comment '设备预算id',
  `budget_id` 			char(19) 		default null comment '预算id',
  `device_id` 			int 			default null comment '设备id',
  `days` 				int 			default null comment '天数',
  `depreciation` 		decimal(10, 2) 	default null comment '折旧成本',
  `remark` 				varchar(255) 	default null comment '备注',
  primary key (`budget_device_id`)
) engine = innodb comment = 'cmc设备预算表';

-- ----------------------------
-- 初始化-设备预算表数据
-- ----------------------------

-- ----------------------------
-- 42、cmc预结算表
-- ----------------------------
drop table if exists `cmc_budget_settle`;
create table `cmc_budget_settle`  (
  `budget_settle_id` 	bigint not null  auto_increment comment '预结算id',
  `budget_id` 			char(19) 		default null comment '预算id',
  `content` 			varchar(255) 	default null comment '工作类别',
  `price_id` 			int 			default null comment '结算单价id',
  `workload` 			double 			default null comment '工作量',
  `coefficient` 		double 			default null comment '系数',
  `ground_type` 		char(1) 		default null comment '地类',
  `settle` 				decimal(10, 2) 	default null comment '结算金额',
  `remark` 				varchar(255) 	default null comment '备注',
  primary key (`budget_settle_id`)
) engine = innodb comment = 'cmc预结算表';

-- ----------------------------
-- 初始化-预结算表数据
-- ----------------------------

-- ----------------------------
-- 43、cmc人员预算表
-- ----------------------------
drop table if exists `cmc_budget_staff`;
create table `cmc_budget_staff`  (
  `budget_staff_id` 	bigint not null  auto_increment comment '人员预算id',
  `budget_id` 			char(19) 		default null comment '预算id',
  `user_id` 			bigint 			default null comment '人员id',
  `days` 				int 			default null comment '天数',
  `staff_cost` 			decimal(10, 2) 	default null comment '人员成本',
  `remark` 				varchar(255) 	default null comment '备注',
  primary key (`budget_staff_id`)
) engine = innodb comment = 'cmc人员预算表';

-- ----------------------------
-- 初始化-人员预算表数据
-- ----------------------------

-- ----------------------------
-- 44、cmc项目审批表
-- ----------------------------
drop table if exists `cmc_project_comment`;
create table `cmc_project_comment`  (
  `project_id` 			char(19)  		not null 	comment '项目id',
  `jy_comment` 			varchar(255)  	default null comment '经营审核意见',
  `jy_approver` 		bigint			default null comment '经营审核人',
  `jy_approval_time` 	date			default null comment '经营审核时间',
  `manage_comment` 		varchar(255)	default null comment '分管审核意见',
  `manage_approver` 	bigint			default null comment '分管审核人',
  `manage_approval_time` date			default null comment '分管审核时间',
  `sc_comment` 			varchar(255)	default null comment '生产确认意见',
  `sc_approver` 		varchar(50)		default null comment '生产确认人',
  `sc_approval_time` 	date			default null comment '生产确认时间',
  primary key (`project_id`)
) engine = innodb comment = 'cmc项目审批表';

-- ----------------------------
-- 初始化-项目审批表数据
-- ----------------------------
INSERT INTO `cmc_project_comment` VALUES ('1648881410480275457', '已核，控制是否要做需明确，可开展工作。', 13, '2023-04-18', '增加五等控制点工作计划。\r\n高原地区作业，必须按相关规定做好安全措施，确保安全生产。\r\n同意开展工作。', 10, '2023-04-18', '按要求进行作业', NULL, '2023-04-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881410534801409', '已阅核，可开展工作。', 13, '2023-04-13', '同意。', 10, '2023-04-13', NULL, NULL, '2023-04-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881410555772930', '已核，建议开展测绘工作。', 20, '2023-04-11', '同意', 11, '2023-04-11', '按规范要求开展工作', NULL, '2023-04-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881410572550145', '已核，可开展工作。', 13, '2023-04-12', '同意。', 10, '2023-04-12', '严格按规范及作业计划执行', NULL, '2023-04-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881410593521666', '1:2000地形图更正为1:2000地形地类图,可以开展测绘工作。', 20, '2023-04-10', '同意开展工作。', 10, '2023-04-11', NULL, NULL, '2023-04-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881410610298882', '已核，建议开展勘察工作。', 20, '2023-04-10', '同意开展工作', 11, '2023-04-11', NULL, NULL, '2023-04-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270401', '已核，可以开展测绘工作。', 20, '2023-04-10', '同意开展工作', 11, '2023-04-11', '按公司要求开展工作', NULL, '2023-04-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270402', '已阅核，可开展工作。注意水上作业安全，须严格按照甲方安全要求开展作业。', 13, '2023-05-10', NULL, 11, '2023-05-11', '已知晓技术要求和工作内容，准备进场开展工作', NULL, '2023-05-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270403', '已阅核，可开展工作。', 13, '2023-05-11', '可以开展工作', 11, '2023-05-12', '按要求进行作业', NULL, '2023-05-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270404', '已阅知。', 13, '2023-05-12', '可以开展工作', 11, '2023-05-12', '已进场开展', NULL, '2023-05-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270405', '已核，可以开展工作。', 20, '2023-05-15', '根据项目实际辨识安全风险因素，制定落实管控措施，做好安全生产。\r\n按合同约定，做好技术服务工作。\r\n同意开展工作。', 10, '2023-05-16', '按照合同文件及技术、安全交底内容开展现场工作。', NULL, '2023-05-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270406', '已阅核，可开展工作。', 13, '2023-05-19', '同意开展', 11, '2023-05-22', NULL, NULL, '2023-05-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270407', '已核，可开展工作。', 13, '2023-06-12', '同意开展工作。', 10, '2023-06-12', '按合同约定执行本项目生产，技术流程和安全管理按公司相关文件执行。', NULL, '2023-06-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270408', '可开展工作。', 13, '2023-07-04', '可以开展工作。', 11, '2023-07-04', NULL, NULL, '2023-07-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270409', '已阅核，可开展工作。请技术负责人随时关注现场生产情况并进行技术指导。', 13, '2023-07-07', '可以开展工作，项目负责人、技术部主管人员积极和业主沟通，确保成果满足用户需求；国外项目加强人员安全等管控', 11, '2023-07-17', '已知晓项目概况，执行公司的技术要求和安全要求，境外加强人员安全防护措施，项目负责人和现场负责人及时跟业主方和公司沟通汇报项目开展情况。', NULL, '2023-08-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270410', '可开展工作。', 13, '2023-07-14', '可以开展工作', 11, '2023-07-17', '可开展工作。', NULL, '2023-07-19');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270411', '已核，可开展工作。', 13, '2023-07-14', '可以开展工作', 11, '2023-07-17', '按要求进行作业', NULL, '2023-07-19');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270412', '已核。', 13, '2023-07-17', '可以开展工作，加强安全管理，与甲方积极沟通', 11, '2023-07-17', '项目已安全实施中\r\n', NULL, '2023-08-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270413', '已核，可以开展工作。', 20, '2023-07-31', '可以开展工作', 11, '2023-08-01', '任务明确，可以开展生产。', NULL, '2023-08-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270414', '已核，无异议。', 13, '2023-09-18', '同意开展工作', 11, '2023-09-21', '任务已明确，可以开展工作。', NULL, '2023-09-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270415', '已核，可开展工作。', 13, '2023-10-11', '可以开展工作；加强和各相关方沟通，满足用户要求', 11, '2023-10-19', NULL, NULL, '2023-10-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270416', '已核，可以开展工作。', 20, '2023-10-19', '可以开展工作', 11, '2023-10-19', '本项目内外业工作均已按要求完成。成果资料已提交业主！', NULL, '2023-11-10');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270417', '已核，可开展工作。', 13, '2023-10-23', '尽快开展工作，积极和业主有效沟通，确保满足用户需求', 11, '2023-10-30', '任务已明确，可以开展工作。', NULL, '2023-10-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270418', '已核，建议开展工作。', 20, '2023-11-01', '同意，按合同及甲方要求开展工作', 7, '2023-11-01', '按合同约定及条款执行项目生产安排，根据电厂安全生产管理制度履行各项安全生产措施。', NULL, '2023-11-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270419', '已阅核，可开展工作。', 13, '2023-11-15', '尽快对接甲方，并开展工作。', 11, '2023-11-15', NULL, NULL, '2023-11-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270420', '已阅核，可开展工作。', 13, '2023-11-17', '可以开展工作，项目负责人落实实施方案，会同项目管理部编制项目预算并上报审批', 11, '2023-11-17', '根据合同约定工作内容，合同工期和重要节点开展现场工作，做好与分包商的工作内容沟通，与甲方的后续工作开展衔接事宜。现场实施期间严格按照公司安全生产管理规定以及甲方安全生产要求开展项目工作。', NULL, '2023-11-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270421', NULL, NULL, NULL, NULL, 7, '2023-11-21', NULL, NULL, '2023-11-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270422', '已阅核，可开展工作。', 13, '2023-11-23', '按合同要求开展工作', 11, '2023-11-24', '依据合同条款及技术要求执行现场各项工作。', NULL, '2023-11-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270423', '已阅核，可开展工作。', 13, '2023-12-26', '同意开展工作', 11, '2023-12-26', NULL, NULL, '2023-12-26');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270424', '已阅核，可开展工作。', 13, '2024-01-08', '激光技术中心承担数据采集、德方公司承担内业与项目统筹、监测中心承担控制测量与地形图调绘补测。\r\n同意开展工作。', 10, '2024-01-08', '已与甲方沟通技术要求，开始开展工作', NULL, '2024-01-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270425', '已阅核，可开展工作。', 13, '2024-01-08', '同意开展工作。', 10, '2024-01-08', NULL, NULL, '2024-01-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270426', '已阅核，可开展工作。', 13, '2024-01-11', '同意开展工作。', 10, '2024-01-11', NULL, NULL, '2024-01-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270427', '已阅核，可开展工作。', 13, '2024-01-19', '同意开展工作。', 10, '2024-01-19', NULL, NULL, '2024-01-19');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270428', '已阅核，可开展工作。', 13, '2024-01-17', '测区海拔高、气温低，请作业部门根据实际情况，辨识安全隐患、制定管控措施，做好安全生产。\r\n对于原有地形图做校核检查，并报技术质量部。\r\n同意开展工作。', 10, '2024-01-17', '已知晓，严格执行。', NULL, '2024-01-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270429', '已知悉，可开展工作。', 13, '2024-02-26', '同意开展工作。', 10, '2024-02-26', '已知晓', NULL, '2024-02-26');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270430', '已阅核，可开展工作。', 13, '2024-02-29', '同意开展工作。', 10, '2024-03-01', NULL, NULL, '2024-03-05');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270431', '已阅核，可开展工作。', 13, '2024-02-29', '同意开展工作。', 10, '2024-03-01', NULL, NULL, '2024-03-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270432', '已阅核，可开展工作。', 13, '2024-03-07', '同意开展工作。', 10, '2024-03-07', NULL, NULL, '2024-03-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270433', '已核，可开展工作。', 13, '2024-03-13', '同意开展工作。', 10, '2024-03-13', '已进行安全技术交底工作。', NULL, '2024-03-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270434', '已阅知，可开展工作。', 13, '2024-03-14', '同意开展工作。', 10, '2024-03-15', NULL, NULL, '2024-03-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270435', '已核，可开展工作。', 13, '2024-03-20', '测区海拔较高，请按规定做好安全生产、森林草原防火工作。\r\n同意开展工作。', 10, '2024-03-21', NULL, NULL, '2024-03-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270436', '已阅核，可开展工作。', 13, '2024-03-27', '请制定并落实安全措施，确保安全作业。\r\n同意开展工作。', 10, '2024-03-27', '严格按照相关要求作业。', NULL, '2024-03-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270437', '可以开展工作。', 20, '2024-03-28', '同意开展工作。', 10, '2024-03-28', NULL, NULL, '2024-03-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270438', '已核，可开展工作。', 13, '2024-04-07', '同意开展工作。', 10, '2024-04-07', NULL, NULL, '2024-04-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270439', '已阅核，可开展工作。', 13, '2024-04-09', '森林防火高风险季节，请项目部严格遵守、落实有关消防、安全管理规定，确保生产安全。\r\n同意开展工作。', 10, '2024-04-10', NULL, NULL, '2024-04-10');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270440', '已核，可开展工作。', 13, '2024-04-23', '同意开展工作。', 10, '2024-04-28', '已进行技术和安全交底，准备进场', NULL, '2024-04-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270441', '可以开展工作。', 20, '2024-04-25', '同意开展工作，注意飞行安全', 11, '2024-04-25', '已交底', NULL, '2024-04-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270442', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270443', '已阅核，可开展工作。', 13, '2024-04-30', '测图区域以树林为主，地物少、地类简单。地形图外业工作按内部标准50%结算。\r\n同意开展工作。', 10, '2024-04-30', NULL, NULL, '2024-04-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270444', '已阅知，可开展工作。', 13, '2024-05-06', '同意开展工作。', 10, '2024-05-06', NULL, NULL, '2024-05-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270445', '已阅核，可开展工作。', 13, '2024-05-15', '同意开展工作。', 10, '2024-05-15', NULL, NULL, '2024-05-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270446', '已核，可开展工作。', 13, '2024-05-24', '同意开展工作', 11, '2024-05-24', NULL, NULL, '2024-05-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270447', '已核。', 13, '2024-05-24', '同意开展，按要求提交2种格式的成果，和用户保持积极沟通', 11, '2024-05-24', NULL, NULL, '2024-05-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270448', '已核，可开展工作。', 13, '2024-06-05', '同意。', 10, '2024-06-05', NULL, NULL, '2024-06-05');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270449', '已核，可开展工作。', 13, '2024-06-06', '请参与部门、作业人员按相关规范规程开展作业，保证安全生产与产品质量。\r\n同意开展工作。', 10, '2024-06-06', '已进行安全、技术交底，严格按照相关要求作业。', NULL, '2024-06-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270450', '已核，可开展工作。', 13, '2024-06-11', '同意开展工作。', 10, '2024-06-12', NULL, NULL, '2024-06-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270451', '已阅核，可开展工作。', 13, '2024-01-05', '尽快开展工作，注意飞行安全，天气因素影响工期及时沟通', 11, '2024-01-08', '按要求进行作业', NULL, '2024-01-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270452', '已核，可开展工作。', 13, '2024-01-15', '尽快开展工作', 11, '2024-01-15', NULL, NULL, '2024-01-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270453', '已阅核，可开展工作。', 13, '2024-01-26', '按要求工作', 7, '2024-01-27', '按照合同要求和电厂管理规定开展各项工作，确保安全生产。', NULL, '2024-01-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270454', '已阅知，可开展工作。', 13, '2024-01-30', '按合同要求开展工作', 7, '2024-01-30', '按照合同要求和电厂管理规定开展各项工作，确保安全生产。', NULL, '2024-01-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270455', '已阅知，可开展工作。', 13, '2024-01-30', '按要求开展工作', 11, '2024-02-01', '已开展工作', NULL, '2024-02-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270456', '已阅知，可开展工作。', 13, '2024-01-30', '按要求开展工作', 11, '2024-02-01', '已按要求开展工作。', NULL, '2024-02-05');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270457', '已阅知，可开展工作。', 13, '2024-01-30', '按要求开展工作', 11, '2024-02-01', '按照要求开展工作。', NULL, '2024-02-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270458', '已阅知，可开展工作。', 13, '2024-01-30', '按要求开展工作', 11, '2024-02-01', '按要求完成。', NULL, '2024-02-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270459', '已阅知，可开展工作。', 13, '2024-01-30', '按要求开展工作', 11, '2024-02-01', NULL, NULL, '2024-02-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270460', '已阅核，可开展工作。', 13, '2024-03-06', '按甲方要求开展工作', 7, '2024-03-06', '严格按照公司及业主单位要求及规章制度开展现场工作。', NULL, '2024-03-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270461', '已阅核，可开展工作。', 13, '2024-03-06', '按甲方要求开展工作', 7, '2024-03-06', '严格按照公司及业主单位要求及规章制度开展现场工作', NULL, '2024-03-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270462', '已阅知，可开展工作。', 13, '2024-05-07', '可以开展工作', 11, '2024-05-09', '已进场开展工作', NULL, '2024-05-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270463', '已阅核，可开展工作。', 13, '2024-05-11', '同意开展工作，和甲方积极有效沟通，涉水作业注意安全', 11, '2024-05-11', NULL, NULL, '2024-05-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270464', '已核，可开展工作。', 13, '2024-05-24', '同意开展，水上作业严格按规定执行，保证生产安全', 11, '2024-05-24', NULL, NULL, '2024-05-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270465', '已核，可开展工作。', 13, '2024-06-20', '同意开展工作。', 10, '2024-06-20', NULL, NULL, '2024-06-20');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270466', '已核，可开展工作，测区根据后续专业需要，布设五等平面控制。', 13, '2024-06-20', '尽快开展工作，保障飞行安全，积极沟通工期，满足用户需求', 11, '2024-06-20', NULL, NULL, '2024-06-20');
INSERT INTO `cmc_project_comment` VALUES ('1648881410631270467', '已核，可开展工作。', 13, '2024-06-24', '可开展工作', 7, '2024-06-25', '下周一（7月1日）进行安全、技术交底。本项目技术指标按照甲方技术规范书执行。', NULL, '2024-06-25');
-- INSERT INTO `cmc_project_comment` VALUES ('1648881410631270468', '已阅知，可开展工作', 15, '2024-07-09', '可以开展工作', 11, '2024-07-09', '已组织进行安全、技术交底工作，严格按照相关要求生产。', NULL, '2024-07-10');
-- INSERT INTO `cmc_project_comment` VALUES ('1648881410631270469', '已阅，可以开展工作', 15, '2024-07-10', '尽快开展工作，按合同工期进行计划，积极与甲方和用户沟通；现场作业确保交通、飞行等安全', 11, '2024-07-10', '按要求进行作业', NULL, '2024-07-10');
-- INSERT INTO `cmc_project_comment` VALUES ('1648881410631270470', '已知悉，可开展工作', 15, '2024-07-12', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881410643853314', '可开展工作。', 13, '2023-04-07', '项目管理部和项目经理尽快完成预算，尽快开展工作', 11, '2023-04-10', NULL, NULL, '2023-04-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881410660630529', '已阅核，可开展工作。', 13, '2023-03-30', '同意。', 10, '2023-03-30', '已进行交底工作，准备进场', NULL, '2023-03-31');
INSERT INTO `cmc_project_comment` VALUES ('1648881410677407746', '已阅核，可开展工作。', 13, '2023-03-29', '同意开展', 11, '2023-03-28', '按要求作业', NULL, '2023-03-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881410694184962', NULL, NULL, NULL, '同意。', 10, '2023-03-22', '按要求进行作业', NULL, '2023-03-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881410710962177', '已阅核，可开展工作。', 13, '2023-03-17', '同意开展工作。', 10, '2023-03-18', NULL, NULL, '2023-03-19');
INSERT INTO `cmc_project_comment` VALUES ('1648881410727739393', '已阅核，可开展工作。', 13, '2023-03-17', '同意开展工作。', 10, '2023-03-18', '已知晓项目情况，及时进场工作', NULL, '2023-03-19');
INSERT INTO `cmc_project_comment` VALUES ('1648881410744516610', '已阅核，可开展工作。', 13, '2023-03-17', '同意开展工作。', 10, '2023-03-18', '保证安全保证质量完成', NULL, '2023-03-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881410761293825', '已阅核，可开展工作。', 13, '2023-03-14', '严格安按照技术设计书作业，作业过程中多与甲方沟通', 7, '2023-03-16', '已知晓工作内容及相关要求，严格按技术设计书及安全管理规定执行。', NULL, '2023-03-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881410778071042', '已阅核，可开展工作。《倾斜数字摄影测量技术规程》及《实景三维数据倾斜摄影测量技术规程》行业标准预计会于6月实施，请项目提前学习其相关要求并兼顾。', 13, '2023-03-13', '激光技术部负责数据采集，测绘工程中心负责像控点、DOM制作，航测遥感中心负责DEM制作，地理信息中心负责项目总体协调管理及三维模型、电子沙盘制作。', 10, '2023-03-14', '按要求熟悉上述规范，配合开展工作。', NULL, '2023-03-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881410790653953', '已阅核，可开展工作。', 13, '2023-03-13', '同意开展工作。', 10, '2023-03-15', '已知晓项目情况，进场工作', NULL, '2023-03-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881410815819777', '已阅核，可开展工作。', 13, '2023-03-06', '同意开展工作。', 10, '2023-03-06', '按要求作业', NULL, '2023-03-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881410832596993', '已阅核，“拉哇水库CS20~拉哇坝址河段1:2000带状地形测绘（不含水下地形图）”该项工作取消，其他可实施。', 13, '2023-03-13', '同意开展工作，和甲方积极沟通技术工期，满足客户要求', 11, '2023-03-13', '已安全和技术交底，涉及水下地形，特别注意安全开展工作', NULL, '2023-03-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881410849374209', '已阅核，可开展工作。', 13, '2023-03-06', '同意开展工作。', 10, '2023-03-06', '按要求作业', NULL, '2023-03-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881410866151425', '已核，可以开展工作。', 20, '2023-03-01', '同意开展工作。', 10, '2023-03-02', NULL, NULL, '2023-03-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881410878734337', '已阅，可以开展工作。', 20, '2023-03-01', '同意。', 10, '2023-03-01', '已技术和安全交底。因本次工作任务涉及大部分水上作业，风险较高，需重点注意，按照相关要求开展工作。', NULL, '2023-03-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881410899705858', '等用户通知进场。', 20, '2023-03-02', '同意开展工作。', 10, '2023-03-02', '按要求开展工作，注意青苗赔偿和现场协调工作', NULL, '2023-03-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881410912288769', '可以开展工作。', 20, '2023-02-24', '同意开展工作。', 10, '2023-02-24', '已完成技术和安全交底，因涉及水下地形测量，需重点关注涉水作业', NULL, '2023-02-26');
INSERT INTO `cmc_project_comment` VALUES ('1648881410929065985', '可以开展工作。', 20, '2023-02-24', '同意开展工作。', 10, '2023-02-24', NULL, NULL, '2023-02-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881410945843202', '可以开展工作。', 20, '2023-02-21', '同意开展工作。', 10, '2023-02-22', '已知晓项目情况，准备开展工作', NULL, '2023-02-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881410962620417', '尽快开展测量工作。', 20, '2023-02-21', '同意开展工作。', 10, '2023-02-22', '按要求进行作业', NULL, '2023-02-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881410979397634', '已阅核，可开展工作。', 13, '2023-02-22', '尽快开展工作，项目负责人联系业主落实相关要求', 11, '2023-02-23', NULL, NULL, '2023-02-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881411000369153', '可以开展工作。', 20, '2023-02-21', '落实安全管控措施，确保安全生产。\r\n同意开展工作。', 10, '2023-02-22', '严格按相关要求进行生产，不冒险作业。', NULL, '2023-02-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881411017146369', '可以开展工作。', 20, '2023-02-20', '同意开展工作。', 10, '2023-02-22', '已进行安全和技术交底，按标准开展工作', NULL, '2023-02-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881411033923585', '可以开展工作。', 20, '2023-02-20', '同意开展工作。', 10, '2023-02-20', '已提前开展工作', NULL, '2023-02-20');
INSERT INTO `cmc_project_comment` VALUES ('1648881411050700802', '已阅核，可开展工作。', 13, '2023-02-16', '同意开展工作。', 10, '2023-02-16', '严格按相关要求进行作业。', NULL, '2023-02-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881411067478017', '已核，可以开展工作。', 20, '2023-02-14', '请项目部制订、落实安全生产管控措施，确保安全生产。\r\n同意开展工作。', 10, '2023-02-20', '已进行安全技术交底', NULL, '2023-03-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881411084255234', '已阅核，可开展工作。', 13, '2023-02-16', '请承担项目的部门负责人，做好安全、质量、进度管控。\r\n同意开展工作。', 10, '2023-02-20', '已进行安全和技术交底，按照规范要求开展工作。测区涉及武警支队等，需提前联系报备。', NULL, '2023-02-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881411105226753', '已核，可以开展工作。', 20, '2023-02-08', '同意开展工作。', 10, '2023-02-08', NULL, NULL, '2023-02-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881411122003970', '已核，可以开展工作。', 20, '2023-02-09', '同意开展工作。', 10, '2023-02-09', '已进行安全和技术交底，按照要求开展工作', NULL, '2023-02-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881411138781186', '已核，可以开展工作。', 20, '2023-05-18', '数据采集、控制测量、外业调绘等外业工作由激光技术部负责；内业由测绘工程中心负责。\r\n同意开展工作。', 10, '2023-02-08', NULL, NULL, '2023-02-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881411138781187', '已阅核，可开展工作。', 13, '2023-12-14', '测区交通不便，请项目负责人、项目管理部做好合作单位的安全、质量管理。\r\n同意开展工作。', 10, '2023-12-15', NULL, NULL, '2023-12-19');
INSERT INTO `cmc_project_comment` VALUES ('1648881411138781188', '已核，可开展工作。', 13, '2023-12-14', '加强安全管控，保障安全生产。\r\n新测地形图与已有资料做好衔接、检核。\r\n同意开展工作。', 10, '2023-12-14', NULL, NULL, '2023-12-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881411138781189', '已阅核，可开展工作。', 13, '2023-12-27', '同意开展工作，现场注意安全', 11, '2023-12-27', NULL, NULL, '2023-12-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881411138781190', '已阅核，可开展工作。', 13, '2023-12-26', '同意开展工作。', 10, '2023-12-29', NULL, NULL, '2024-01-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881411159752705', '已核，可以开展工作。', 20, '2023-02-08', '同意开展工作。', 10, '2023-02-09', '以安全和技术交底，按照要求开展工作', NULL, '2023-02-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881411184918529', '已核，可开展工作。', 20, '2023-02-07', '工作由项目管理部委托合作单位完成，航测遥感中心负责协调管理。\r\n同意开展工作。', 10, '2023-02-07', '已完成技术和安全交底，已经与甲方和委外方沟通，现场作业人员已经进场开展工作。', NULL, '2023-02-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881411201695745', '已核，可开展工作。', 20, '2023-02-06', '同意开展工作。', 10, '2023-02-07', '知晓项目概况，准备进场开展工作', NULL, '2023-02-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881411218472961', '已核，可以开展工作。', 20, '2023-02-06', '同意开展工作。', 10, '2023-02-07', '已安全和技术交底，按照要求开展工作。', NULL, '2023-02-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881411235250178', '已核，可开展工作。', 13, '2023-02-07', '请制订、落实安全、质量、进度管控措施，做好项目技术服务与沟通协调工作。\r\n同意开展工作。', 10, '2023-02-07', '先通过试点和沟通，理顺工作思路，具体落实到外业和内业技术的各个细节，按照安全和质量标准开展工作。', NULL, '2023-02-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881411252027394', '已阅核，可开展工作。', 13, '2023-02-08', '同意。', 10, '2023-02-07', '按要求作业', NULL, '2023-02-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881411268804610', '已核，可以开展工作。', 20, '2023-02-14', '同意开展工作。', 10, '2023-02-14', NULL, NULL, '2023-02-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881411281387521', '已核，可开展工作。', 13, '2023-02-07', '同意。', 10, '2023-02-08', NULL, NULL, '2023-02-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881411298164738', '已核，可开展工作。', 13, '2023-02-07', '同意开展工作。', 10, '2023-02-13', '以正常开展工作。', NULL, '2023-02-20');
INSERT INTO `cmc_project_comment` VALUES ('1648881411319136258', '已核，可开展工作。', 13, '2023-02-07', '同意。', 10, '2023-02-07', '按要执行', NULL, '2023-02-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881411331719170', '已核，可开展工作。', 13, '2023-02-07', '按合同及电厂要求开展工作', 7, '2023-02-08', NULL, NULL, '2023-02-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881411348496386', '已核，可以开展工作。', 20, '2023-02-14', '同意。', 10, '2023-02-14', NULL, NULL, '2023-02-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881411373662209', '已核，可开展工作。', 13, '2023-02-07', '同意开展工作。', 10, '2023-02-09', '收到任务，按要求组织开展工作。', NULL, '2023-02-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881411419799553', '已核，可开展工作。', 13, '2023-02-07', '同意。', 10, '2023-02-07', NULL, NULL, '2023-02-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881411457548290', '已阅，可以开展工作。', 20, '2023-02-02', '尽快开展工作', 11, '2023-02-03', '已明确项目需求，完成了技术和安全交底，相关生产人员已进场，按照安全和质量要求开展工作。', NULL, '2023-02-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491329', '已核。', 13, '2023-01-31', '工作已开展，尽快完成后续工作', 11, '2023-01-31', '本项目已完成前期立项所需工作', NULL, '2023-01-31');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491330', '已阅核，可开展工作。', 13, '2023-12-14', '同意开展工作。', 10, '2023-12-15', NULL, NULL, '2023-12-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491331', '已阅知，可开展工作。', 13, '2023-12-11', '冬季高原作业，严格遵守法律法规、做好安全管控，保证安全生产。\r\n地形图内业工作内部结算按新能源项目适当核减系数。\r\n同意开展工作。', 10, '2023-12-12', '已知晓技术要求和安全要求，开展工作', NULL, '2023-12-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491332', '已核，可以开展工作。', 20, '2023-12-07', '冬季高海拔区域作业，做好安全管控措施，确保安全生产。\r\n地形图内、外业参照新能源项目的60%内部结算。\r\n同意开展工作。', 10, '2023-12-07', NULL, NULL, '2023-12-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491333', '已核，可以议开展工作。', 20, '2023-12-07', '冬季高原、机场附近作业，严格遵守法律法规、做好安全管控。\r\n由于地形简单、植被稀少，主要工作为数据采集。地形图内外业工作内部结算按新能源项目适当核减系数。\r\n同意开展工作。', 10, '2023-12-07', '任务已明确，可以安排生产。', NULL, '2023-12-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491334', '已核，可以开展工作。', 20, '2023-12-07', '冬季高原、机场附近作业，严格遵守法律法规、做好安全管控。\r\n由于地形简单、植被稀少。地形图内外业工作内部结算按新能源项目适当核减系数。\r\n同意开展工作。', 10, '2023-12-07', '任务已明确，可以安排生产。', NULL, '2023-12-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491335', '已阅核，可开展工作。', 13, '2023-12-01', '同意开展工作。', 10, '2023-12-02', NULL, NULL, '2023-12-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491336', '已核，可开展工作。', 13, '2023-11-27', '同意。', 10, '2023-11-27', '任务已明确', NULL, '2023-11-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491337', '已核，尽快安排工作。', 20, '2023-11-16', '尽快安排', 11, '2023-11-21', NULL, NULL, '2023-11-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491338', '已核，可开展工作。', 13, '2023-11-11', '请项目管理部、项目负责人、技术质量部做好安全、质量管控。\r\n同意开展工作。', 10, '2023-11-12', '结合项目所在地区，并有针对性制定生产作业流程，做好安全生产管理，并对委外单位在作业前进行安全教育培训，生产过程中加强过程检查。', NULL, '2023-11-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491339', '已核，可开展工作。', 13, '2023-11-11', '同意开展工作。', 10, '2023-11-12', '任务已明确，可以安排生产。', NULL, '2023-11-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491340', '已核，可开展工作。', 13, '2023-11-07', '同意开展工作。', 10, '2023-11-07', '已进行安全、技术交底工作。', NULL, '2023-11-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491341', '已阅核，可开展工作。', 13, '2023-11-06', '同意开展工作。', 10, '2023-11-06', '任务已接收，可以安排作业。', NULL, '2023-11-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491342', '已阅核，可开展工作。', 13, '2023-11-03', '地形图工作按内部标准50%结算。\r\n同意开展工作。', 10, '2023-11-03', NULL, NULL, '2023-11-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491343', '已阅核，可开展工作。', 13, '2023-11-03', '同意开展工作。', 10, '2023-11-03', '任务已明确，可以安排生产。', NULL, '2023-11-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491344', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491345', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491346', '已核，可以开展工作。', 20, '2023-10-19', '植被茂密对地形图精度的影像，请项目负责人、技术负责人与用户做好沟通。\r\n同意开展工作。', 10, '2023-10-20', NULL, NULL, '2023-10-20');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491347', '已核。', 13, '2023-10-12', '同意开展工作。', 10, '2023-10-12', '已知晓项目具体情况，开展工作', NULL, '2023-10-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491348', '已核，可开展工作。', 13, '2023-10-07', '同意开展工作。', 10, '2023-10-08', NULL, NULL, '2023-10-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491349', '已核，可开展工作。现场工作范围及要求有变化时，请及时告知我部门。', 13, '2023-09-27', '尽快开展工作，项目负责人须积极与用户沟通，各部门负责人要提前安排工作计划及备份方案，确保工期质量满足要求，节日期间作业要特别注意安全', 11, '2023-09-27', '已知晓项目情况。根据工期及时开展工作、', NULL, '2023-09-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491350', '已核，可开展工作。', 13, '2023-09-26', '尽快开展工作，和用户积极沟通工期', 11, '2023-09-26', NULL, NULL, '2023-09-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491351', '已核，可以开展工作。', 20, '2023-09-14', '同意开展工作。', 10, '2023-09-14', NULL, NULL, '2023-09-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491352', '已核，可开展工作。', 13, '2023-09-08', '请收集已有地形图资料，做好接边与检查。\r\n同意开展工作。', 10, '2023-09-08', '任务已明确，可以开展工作。', NULL, '2023-09-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491353', '已核，可开展工作。', 13, '2023-09-07', '同意开展工作。', 10, '2023-09-11', '任务已明确，可以安排生产。', NULL, '2023-09-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491354', '已核，可开展工作。', 13, '2023-09-06', '同意开展工作。', 10, '2023-09-14', NULL, NULL, '2023-09-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491355', '已核，项目资料需求时间要求在9月10日，按此时间节点提交中间成果，现场有突发情况及时告知我部门，可开展工作。', 13, '2023-08-30', '同意开展工作。', 10, '2023-08-30', '任务明确，已完成安全、技术交底，可以开展工作。', NULL, '2023-08-31');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491356', '已核，可开展工作。', 13, '2023-08-29', '同意开展工作。', 10, '2023-08-29', '任务已明确，已安排生产。', NULL, '2023-08-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491357', '已核，可开展工作。', 13, '2023-08-29', '同意。', 10, '2023-08-29', NULL, NULL, '2023-08-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491358', '已核，可开展工作。', 13, '2023-08-29', '同意开展工作。', 10, '2023-08-29', NULL, NULL, '2023-08-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491359', '已核，工期暂按10月底控制，可开展工作。', 13, '2023-08-21', '同意开展工作。', 10, '2023-08-21', '任务已明确，已完成安全、技术交底，可以开展工作。', NULL, '2023-08-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491360', '已核，可以开展工作。', 20, '2023-08-17', '同意。', 10, '2023-08-18', NULL, NULL, '2023-08-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491361', '已核，可以开展工作。', 20, '2023-08-17', '同意开展工作。', 10, '2023-08-18', '已进行了安全、技术交底工作，严格按照相关要求作业。', NULL, '2023-08-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491362', '已阅核，可开展工作。注意签证手续办理。', 13, '2023-08-11', '同意开展工作。', 10, '2023-08-11', NULL, NULL, '2023-08-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491363', '已核，可以开展工作。', 20, '2023-08-09', '汛期高原山区作业，按要求做好风险辨识与安全管控措施。\r\n同意作业。', 10, '2023-08-09', '按要求进行作业', NULL, '2023-08-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491364', '已核，可以开展工作。', 20, '2023-08-09', '汛期高原作业，按要求做好风险辨识与安全管控措施。\r\n同意作业。', 10, '2023-08-09', '按要求进行作业', NULL, '2023-08-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491365', '已核，可以开展测量工作。尽快了解现场情况，注意水下测量安全保障。', 20, '2023-08-17', '水下地形测量须具备安全作业条件再开展外业工作。如无安全作业条件，及时与甲方沟通协商解决办法。\r\n同意。', 10, '2023-08-18', '任务已明确，人员已安排，已完成安全、技术交底，可以开展工作。', NULL, '2023-08-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491366', '已核，可以开展测绘工作。', 20, '2023-08-02', '同意开展工作。', 10, '2023-08-02', '任务明确，已安排生产。', NULL, '2023-08-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491367', '已核，可以开展工作。', 20, '2023-07-26', '同意开展工作', 11, '2023-07-27', NULL, NULL, '2023-07-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491368', '已核，可开展工作。', 13, '2023-07-17', '同意。', 10, '2023-07-17', '任务明确，可开展工作。', NULL, '2023-07-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491369', '已核，可开展工作。', 13, '2023-07-04', '同意开展工作。', 10, '2023-07-04', '任务已确认，已接受安全技术交底并开展工作。', NULL, '2023-07-04');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491370', '已核，可开展工作。', 13, '2023-07-03', '同意。', 10, '2023-07-03', NULL, NULL, '2023-07-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491371', '已核，可以开展工作。', 20, '2023-06-30', '同意。', 11, '2023-07-01', '按要求进行作业', NULL, '2023-07-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491372', '可以开展工作。', 20, '2023-06-30', '同意。', 10, '2023-07-01', '按要求进行作业', NULL, '2023-07-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491373', '已核，可以开展工作。', 20, '2023-06-25', '必须制定、落实有效安全措施，具备安全作业条件再开展测绘专业。', 10, '2023-06-26', '已进行安全和技术交底，有工作量变更会及时反馈', NULL, '2023-06-26');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491374', '已核，可开展工作。', 13, '2023-06-25', '同意。', 10, '2023-06-25', '任务明确，可开展作业。', NULL, '2023-06-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491375', '已核，可以开展工作。', 20, '2023-06-20', '同意。', 10, '2023-06-21', '任务明确，可以开展工作。', NULL, '2023-06-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491376', '已核，可以开展工作。', 20, '2023-06-20', '同意。', 10, '2023-06-21', '任务明确，可以开展工作。', NULL, '2023-06-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491377', '已核，可以开展工作。', 20, '2023-06-05', '和甲方积极沟通，积极推进项目各项工作', 11, '2023-06-05', '按要求进行作业', NULL, '2023-06-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491378', '已核，可开展工作。', 13, '2023-06-05', '同意。', 10, '2023-06-05', NULL, NULL, '2023-06-05');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491379', '已核，可开展工作。', 13, '2023-06-05', '高海拔区域、汛期作业，请项目负责人、现场负责人做好风险辨识与管控，确保安全生产。\r\n同意开展工作。', 10, '2023-06-06', '任务已明确。', NULL, '2023-06-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491380', '现场辅助放点配合测量，请现场移民人员签配合单。已核，可以开展工作。', 20, '2023-06-01', '同意开展工作。', 10, '2023-06-02', NULL, NULL, '2023-06-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491381', '已核实，可以开展工作。', 20, '2023-07-14', '同意。', 10, '2023-07-14', '任务明确，可以开展工作。', NULL, '2023-07-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491382', '已核，可开展工作。', 13, '2023-05-23', '同意开展工作。', 10, '2023-05-23', '按要求作业', NULL, '2023-05-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491383', '已核，可开展工作。', 13, '2023-05-19', '同意。', 10, '2023-05-22', '已知晓具体要求，准备开展工作', NULL, '2023-05-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491384', '已核，可开展工作。', 13, '2023-05-18', '同意开展工作。', 10, '2023-05-18', '按公司要求执行', NULL, '2023-05-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491385', '已核，可以开展工作。', 20, '2023-05-05', '请项目负责人按制定、落实安全管控措施，确保安全生产。\r\n同意开展工作。', 10, '2023-05-05', '已接收任务，并开展工作。', NULL, '2023-05-05');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491386', '已核，可以开展工作。', 20, '2023-05-06', '作业区域分散，现场工作前应取得所在地相关部门的许可，做好安全、质量管控措施，保障安全生产和产品质量。\r\n同意开展工作。', 10, '2023-05-06', '已跟技术部沟通技术方案，以及作业难度，村规相关技术要求。准备进场开展工作。', NULL, '2023-05-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491387', '建议开展外业配合工作。配合工作完成后，需要有用户配合签字单。', 20, '2023-05-04', '同意开展工作。', 10, '2023-05-04', NULL, NULL, '2023-05-04');
INSERT INTO `cmc_project_comment` VALUES ('1648881411499491388', '可开展工作，工作过程中有变化及时与用户或我部沟通。', 13, '2023-04-27', '根据现场实际情况，复核方案及时与技术质量部沟通，确保复核成果正确。\r\n同意开展工作。', 10, '2023-04-28', '已知晓技术要求和安全情况，准备进场工作', NULL, '2023-04-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881411533045762', '已阅核，可开展工作。', 13, '2023-01-13', '同意开展工作。', 10, '2023-01-13', '已进行安全、技术交底，严格按照相关要求作业。', NULL, '2023-01-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881411562405890', '已阅核，可开展工作。', 13, '2022-12-29', '同意。', 10, '2023-01-03', '项目已完成，资料已提交，质检部审核中', NULL, '2023-05-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881411587571714', '已阅核，可开展工作。请作业部门与用户再确认测图范围。及时向我部门报备。', 13, '2022-12-26', '同意。', 10, '2023-01-03', '安全为前提、保质保量完成', NULL, '2023-01-04');
INSERT INTO `cmc_project_comment` VALUES ('1648881411612737537', '已阅核，可开展工作。', 13, '2022-12-27', '同意。', 10, '2023-01-03', '已知悉技术和安全事宜', NULL, '2023-01-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881411633709057', '已阅核，可开展工作。', 13, '2022-12-21', '同意开展工作', 11, '2022-12-26', '按照公司要求开展工作', NULL, '2022-12-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881411650486273', '已阅核，可开展工作。', 13, '2022-12-21', '可以开展工作', 11, '2022-12-21', '按照本项目技术设计文件和公司安全生产规定执行本项目现场工作。', NULL, '2022-12-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881411667263489', '已阅核，可开展工作。', 13, '2022-12-21', '尽快开展工作', 11, '2022-12-21', '已安排技术人员进场准备开展外业工作', NULL, '2022-12-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881411688235010', '合同暂未签订，可先开展工作。', 13, '2022-12-19', '可以开展工作', 11, '2022-12-20', '收到并确认项目。', NULL, '2023-01-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881411705012226', '合同暂未签订，可先开展工作。', 13, '2022-12-19', '可以开展工作', 11, '2022-12-20', NULL, NULL, '2022-12-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881411730178050', '已阅核，可开展工作。', 13, '2022-12-07', '测区海拔高、交通不便、冬季作业，严格遵守安全生产相关规定，保障安全生产。\r\n同意开展工作。', 10, '2022-12-08', '冬季高海拔作业，涉及水上测量，严格按照安全生产标准执行，可开展工作。', NULL, '2022-12-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881411751149569', '已阅核，可开展工作。', 13, '2022-12-07', '同意开展工作。', 10, '2022-12-07', '已了解好业主需求，完成技术交底和安全交底，可开展工作。', NULL, '2022-12-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881411772121090', '已阅核，可开展工作。', 13, '2022-12-07', '同意开展工作。', 10, '2022-12-07', '已进行安全技术交底，严格按照相关要求作业。', NULL, '2022-12-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881411788898305', '已阅，可以开展工作。', 20, '2023-02-02', '同意开展工作', 11, '2023-02-03', '按要求完成生产工作', NULL, '2023-02-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881411788898306', '项目已经完成，补登项目。', 20, '2023-08-17', '同意执行', 11, '2023-08-17', '项目已完成，', NULL, '2023-08-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881411788898307', '工作已完成，补登项目。', 20, '2023-08-17', '同意执行', 11, '2023-08-17', '项目已完成', NULL, '2023-08-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881411809869825', '已阅核，可开展工作。', 20, '2022-12-06', '按要求开展工作', 11, '2022-12-06', '按要求进行作业', NULL, '2022-12-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881411826647041', '已阅核，可开展工作。', 13, '2022-12-05', '同意开展工作。', 10, '2022-12-05', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881411847618561', '已阅核，可开展工作。', 13, '2022-11-29', '同意开展工作。', 10, '2022-11-29', '已进行了安全、技术交底工作，严格按照相关要求作业。', NULL, '2022-11-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881411868590081', '已阅核，可开展工作。', 13, '2022-11-17', '尽快开展工作，工期紧，项目及时与业主沟通提交中间资料，尽快交付成果。', 11, '2022-11-21', '保质保量完成', NULL, '2022-11-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881411885367297', NULL, NULL, NULL, '尽快开展工作', 11, '2022-12-06', '已进行安全技术交底，严格按照相关要求作业。', NULL, '2022-12-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881411906338818', '已阅核，GNSS测量及1:1000地形图复核取消，其他项可开展工作。', 13, '2022-11-17', '可以开展工作', 11, '2022-11-17', '按任务书及相关规程规范开展工作', NULL, '2022-12-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881411927310338', '已阅核，可开展工作。', 13, '2022-11-17', '同意开展工作。', 11, '2022-11-21', '已进场开展工作', NULL, '2022-11-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881411944087553', '已阅核，可开展工作。', 13, '2022-11-23', '同意开展工作。', 10, '2022-11-23', '已进场开始工作', NULL, '2022-11-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881411965059074', '已阅核，可开展工作。', 13, '2022-11-10', '同意开展工作。', 10, '2022-11-11', NULL, NULL, '2022-11-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881411986030594', '已阅核，可开展工作。', 13, '2022-11-03', '借款开展完成', 11, '2022-11-07', NULL, NULL, '2022-11-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881412002807809', '已阅核，可开展工作。', 13, '2022-11-03', '同意。', 10, '2022-11-04', '已进行安全技术交底，严格按照相关要求作业。', NULL, '2022-11-04');
INSERT INTO `cmc_project_comment` VALUES ('1648881412023779329', '可开展工作。', 13, '2022-11-01', '同意。', 10, '2022-11-01', '在保证安全、保证质量的情况下有序开展工作', NULL, '2022-11-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881412040556545', '已阅知，可开展工作。', 13, '2022-10-26', '同意，尽快完成工作', 11, '2023-02-23', '已安全和技术交底', NULL, '2022-11-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881412057333761', '已阅核，可开展工作。', 21, '2023-02-23', '同意开展工作，加强跟踪监管', 11, '2023-02-23', NULL, NULL, '2022-11-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881412074110977', '已阅核，可开展工作。', 13, '2022-10-21', '激光技术部负责激光点云、影像采集、三维模型制作；德方公司负责地形图内业；测绘工程中心负责项目统筹及其他外业。\r\n请严格落实安全生产管控规定和质量管理措施，保障安全生产和产品质量。\r\n同意开展工作。', 10, '2022-10-21', '已进行安全交底和技术交底，严格按相关要求进行作业。', NULL, '2022-10-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881412090888194', '已阅核，可开展工作。', 13, '2022-10-18', '及时开展工作', 11, '2022-10-20', '按照签订合同技术要求和公司安全生产管理制度严格执行项目生产。', NULL, '2022-10-20');
INSERT INTO `cmc_project_comment` VALUES ('1648881412107665410', '已阅核，可开展工作。', 13, '2022-10-18', '及时开展工作', 11, '2022-10-20', NULL, NULL, '2022-10-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881412124442625', '已阅核，可开展工作。', 13, '2022-10-14', '同意。', 10, '2022-10-14', '按要求进行安全、技术交底。', NULL, '2022-10-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881412141219841', '已阅核，可开展工作。', 13, '2022-10-12', '目前测量河段流量大，不具备水下地形测量条件，请项目负责人与甲方做好沟通，待枯水期作业。\r\n同意。', 10, '2022-10-14', '按业主及公司要求执行', NULL, '2022-10-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881412153802753', '已阅核，可开展工作。', 13, '2022-10-12', '同意开展工作。外业调绘按地形地类图要求执行。', 10, '2022-10-13', '已进行安全技术交底，严格按照相关要求作业。', NULL, '2022-10-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881412170579969', '已阅核，可开展工作。', 13, '2022-10-10', '请现场负责人与甲方做好协调，按甲方管控要求和合同约定完成项目工作。\r\n同意开展工作。', 10, '2022-10-10', '按投标文件执行本项目工作。', NULL, '2022-10-10');
INSERT INTO `cmc_project_comment` VALUES ('1648881412187357185', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881412204134402', '已阅核，可开展工作。', 13, '2022-09-30', '同意开展工作。', 10, '2022-09-30', '已进行安全、技术交底，严格按照相关要求作业。', NULL, '2022-09-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881412220911618', '已阅核，可开展工作。', 13, '2022-09-23', '同意开展工作。', 11, '2022-09-26', '已进行安全技术交底，严格按相关要求执行。', NULL, '2022-09-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881412237688834', '已阅核，可开展工作。', 13, '2022-09-23', '同意开展工作。', 10, '2022-09-26', '已进行安全技术交底，严格按相关要求执行。', NULL, '2022-09-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881412254466049', '已阅核，可开展工作。', 13, '2022-09-23', '同意开展工作。', 10, '2022-09-26', '已进行安全技术交底，严格按相关要求执行。', NULL, '2022-09-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881412271243265', '已阅核，可开展工作。', 13, '2022-09-19', '同意开展工作。', 10, '2022-09-19', '已知悉测区的技术要求和存在的安全隐患。', NULL, '2022-09-20');
INSERT INTO `cmc_project_comment` VALUES ('1648881412296409090', '已阅核，可开展工作。', 13, '2022-09-14', '同意开展工作。', 10, '2022-09-14', '收到', NULL, '2022-09-19');
INSERT INTO `cmc_project_comment` VALUES ('1648881412313186305', '补登记项目，便于项目管理。', 13, '2022-08-30', '按流程办理', 11, '2022-08-31', '已交底。', NULL, '2022-09-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881412329963522', '补登记。', 13, '2022-08-29', '同意', 11, '2022-08-30', '已交底。', NULL, '2022-08-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881412346740737', '已阅核，可开展工作。', 13, '2022-08-16', '同意开展工作。', 10, '2022-08-16', '已进行安全、技术交底，严格按要求生产。', NULL, '2022-08-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881412363517954', '已核。', 13, '2022-08-10', '同意', 11, '2022-08-10', NULL, NULL, '2022-08-10');
INSERT INTO `cmc_project_comment` VALUES ('1648881412384489473', '同意开展工作。', 13, '2022-08-04', '尽快开展工作', 11, '2022-08-08', NULL, NULL, '2022-08-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881412401266689', '已阅核，可开展工作。', 13, '2022-07-26', '尽快开展工作', 11, '2022-07-28', NULL, NULL, '2022-07-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881412422238210', '已核，可以开展工作。', 15, '2022-07-29', '可以开展工作', 11, '2023-06-14', NULL, NULL, '2023-06-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881412443209730', '已核，可开展工作。', 13, '2022-07-27', '同意', 11, '2022-08-08', '已组织进行安全、技术交底，严格按照相关要求执行。', NULL, '2022-08-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881412459986946', '已阅核，请作业部门严格按照审定的设计书开展工作。', 13, '2022-07-25', '同意开展工作。', 10, '2022-07-25', '根据技术设计书进行现场作业，按公司安全生产管理规定执行生产任务。', NULL, '2022-07-26');
INSERT INTO `cmc_project_comment` VALUES ('1648881412476764161', '已阅核，可开展工作。', 13, '2022-07-25', '同意开展工作。', 10, '2022-07-26', '知晓项目情况，准备安排进场', NULL, '2022-07-26');
INSERT INTO `cmc_project_comment` VALUES ('1648881412493541377', '已阅核，请作业部门严格按照审定的设计书开展工作。', 13, '2022-07-25', '同意开展工作', 7, '2022-07-26', '已进行技术安全交底，严格按照技术设计书执行本项目作业。', NULL, '2022-07-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881412514512898', '已阅核，可开展工作。', 13, '2022-07-20', '同意。', 10, '2022-07-20', NULL, NULL, '2022-07-20');
INSERT INTO `cmc_project_comment` VALUES ('1648881412535484418', '已阅核，可开展工作。', 13, '2022-07-19', '同意开展工作', 11, '2022-07-20', '确认', NULL, '2022-07-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881412552261633', '已阅核，可开展工作。', 13, '2022-07-18', '同意开展工作', 11, '2022-07-20', NULL, NULL, '2022-08-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881412573233153', '已阅核，可开展工作。', 13, '2022-07-14', '同意开展工作。', 10, '2022-07-14', NULL, NULL, '2022-07-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881412594204674', '已阅核，可开展工作。', 13, '2022-07-14', '同意开展工作。', 10, '2022-07-14', '已进行安全、技术交底，严格按照相关要求生产作业。', NULL, '2022-07-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881412610981889', '已阅核，可开展工作。', 13, '2022-07-13', '同意开展工作。', 10, '2022-07-13', '已知晓项目情况，准备开展工作', NULL, '2022-07-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881412631953410', '已阅核，可开展工作。（上传附件需修改）', 13, '2022-07-11', '同意开展工作。', 10, '2022-07-11', '已进行安全交底和技术交底', NULL, '2022-07-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881412648730625', '已阅核，可开展工作。', 13, '2022-07-11', '同意开展工作。', 10, '2022-07-12', '已组织进行安全、技术交底工作。严格按照相关要求作业。', NULL, '2022-07-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881412665507842', '已阅核，可开展工作。', 13, '2022-07-11', '同意开展工作。', 10, '2022-07-11', NULL, NULL, '2022-07-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881412682285058', '已阅核，可开展工作。工期为预估工期，需与用户再协商。', 13, '2022-06-28', '同意开展工作。', 10, '2022-06-30', '已组织进行安全、技术交底工作。严格按照相关要求进行作业。', NULL, '2022-07-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881412699062273', '已阅核，可开展工作。工期视用户要求可做调整，加强过程沟通。', 13, '2022-06-28', '高原地区作业，请按公司规定做好安全生产管理。\r\n同意开展工作。', 10, '2022-06-30', '准备工作完成，进场开展工作', NULL, '2022-06-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881412715839489', '已阅核，可开展工作。', 13, '2022-06-20', '由项目管理部委托合作单位完成。\r\n同意开展工作。', 10, '2022-06-22', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881412736811010', '已阅核，可开展工作。', 13, '2022-06-17', '尽快开展工作，飞行完成后尽快提交资用成果', 11, '2022-06-21', '按要求对合作单位进行安全、质量、进度管控。', NULL, '2022-06-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881412753588225', '已阅核，可开展工作。', 13, '2022-06-17', '同意', 11, '2022-06-21', '已进场开展外业地形图测绘作业', NULL, '2022-06-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881412774559745', '已阅核，可开展工作。', 13, '2022-06-17', '同意开展工作。', 10, '2022-06-18', '已交底', NULL, '2022-06-20');
INSERT INTO `cmc_project_comment` VALUES ('1648881412795531265', '已阅核，可开展工作。', 13, '2022-06-16', '同意。', 10, '2022-06-18', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881412812308481', '已阅核，可开展工作。', 13, '2022-06-13', '同意开展工作。', 10, '2022-06-14', '本项目6月13日进场，已经开始启动。', NULL, '2022-06-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881412829085697', '已阅核，可开展工作。', 13, '2022-06-13', '同意开展工作。', 10, '2022-06-14', '本项目6月13 已经进场。', NULL, '2022-06-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881412845862913', '已阅核，可开展工作。测区需布设满足其他专业需要的控制点。', 13, '2022-06-13', '同意开展工作。', 10, '2022-06-13', NULL, NULL, '2022-06-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881412875223041', '已阅核，测区需布设便于勘探放样的图根点，可开展工作。', 13, '2022-06-08', '请项目负责人做好合作单位的安全、质量、进度管控。\r\n同意开展工作。', 10, '2022-06-09', '按要求对合作单位进行安全、质量、进度管控。', NULL, '2022-06-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881412892000257', '已阅核，可开展工作。\r\n', 13, '2022-06-09', '作业区域海拔高，请项目负责人按要求做好安全预案，保障安全生产。\r\n同意开展工作。', 10, '2022-06-09', '已知晓项目情况，准备进场开展工作', NULL, '2022-06-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881412912971777', '已阅核，可开展工作。注意过程中工作量签证、沟通证据留存搜集。', 13, '2022-06-08', '同意开展工作', 11, '2022-06-13', '已安全和技术交底。', NULL, '2022-06-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881412929748993', '已阅核，可开展工作。', 13, '2022-06-08', '同意开展工作。', 10, '2022-06-09', '已知晓项目情况，准备开闸那工作', NULL, '2022-06-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881412946526209', '已阅核，可开展工作。', 13, '2022-06-07', '同意开展工作。', 10, '2022-06-07', NULL, NULL, '2022-06-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881412963303425', '已阅知，可开展工作。', 13, '2022-06-02', '同意开展工作', 11, '2022-06-06', '已进场开始工作\r\n在保证安全保证质量的原则下有序开展工作', NULL, '2022-06-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881412984274945', '已核，可开展工作。', 13, '2022-06-15', '同意。', 10, '2022-06-18', NULL, NULL, '2022-06-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881413009440769', '已阅核，可开展工作。', 13, '2022-05-27', '同意开展工作。', 10, '2022-05-27', NULL, NULL, '2022-05-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881413030412290', '已阅核，可开展工作。', 13, '2022-05-30', '同意。', 10, '2022-05-30', NULL, NULL, '2022-05-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881413051383810', '已阅核，可开展工作。', 13, '2022-05-26', '同意，尽快开展工作', 11, '2022-05-27', '已组织进行安全、技术交底，严格按相关要求生产。', NULL, '2022-05-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881413072355329', '已阅知，可开展工作。', 13, '2022-05-26', '同意。请项目负责人做好管理、协调工作。', 10, '2022-05-27', '已安全交底和技术交底。', NULL, '2022-05-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881413093326850', '已阅核，可开展工作。', 13, '2022-05-23', '同意', 11, '2022-05-26', '已完成安全和技术交底。', NULL, '2022-05-26');
INSERT INTO `cmc_project_comment` VALUES ('1648881413114298369', '已阅核，可开展工作。', 13, '2022-05-20', '同意开展工作。', 10, '2022-05-24', '已组织进行安全、技术交底。严格按要求进行作业。', NULL, '2022-05-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881413131075586', '已阅核，因电厂管理要求，前期准备工作耽误了时间，工期须再跟甲方沟通落实，安全措施到位的前提下可开展工作。', 13, '2022-05-26', '同意开展工作。外业由测绘工程中心承担、内业由航测遥感中心二组承担。', 10, '2022-05-27', '已进行安全技术交底，严格按相关要求作业。', NULL, '2022-05-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881413147852802', '已阅核，可开展工作。', 13, '2022-05-11', '同意。', 10, '2022-05-11', '已进行安全、技术交底。严格按要求生产。', NULL, '2022-05-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881413164630018', '已阅核，可开展工作。', 13, '2022-05-11', '同意。', 10, '2022-05-11', '已进行安全、技术交底。严格按要求生产。', NULL, '2022-05-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881413181407233', '已阅核，可开展工作。', 13, '2022-05-07', '请项目负责人做好内、外业及与甲方的沟通协调。\r\n同意开展工作。', 10, '2022-05-09', '按技术交底开展项目作业，按安全交底执行安全生产。', NULL, '2022-05-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881413193990145', '已阅核，可开展工作。', 13, '2022-05-05', '可以开展工作，现场签署确认工作量', 11, '2022-05-05', '已与业主沟通，计划5.7进场开展工作', NULL, '2022-05-05');
INSERT INTO `cmc_project_comment` VALUES ('1648881413210767362', '已阅核，可开展工作。', 13, '2022-04-21', '尽快开展工作。', 11, '2022-04-25', '已知晓工作内容及要求，立即进场', NULL, '2022-04-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881413227544578', '已阅核，可开展工作。', 13, '2022-04-21', '尽快开展工作。', 11, '2022-04-25', '今天进场开展工作', NULL, '2022-04-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881413244321794', '已阅核，可开展工作。1:2000范围不需要做1:5000地形图。', 13, '2022-04-19', '数据采集由激光技术中心承担，外业调绘由测绘工程中心承担，内业制图由云南公司承担。\r\n同意开展工作。', 10, '2022-04-19', '已组织进行安全、技术交底。', NULL, '2022-04-19');
INSERT INTO `cmc_project_comment` VALUES ('1648881413265293314', '已阅核，可开展工作。', 13, '2022-04-08', '同意开展工作。', 10, '2022-04-09', '已组织项目参与人员进行了安全、技术交底，严格按要求作业。', NULL, '2022-04-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881413277876226', '已阅核，可开展工作。', 13, '2022-04-07', '同意。', 10, '2022-04-07', '收到，按要求进场完成工作', NULL, '2022-04-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881413294653441', '已阅知，可开展工作。', 13, '2022-04-01', '同意', 11, '2022-04-01', '已进行安全交底和技术交底', NULL, '2022-04-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881413311430658', '已阅知，可开展工作。', 13, '2022-04-01', '同意，尽快开展工作', 11, '2022-04-01', '已完成飞行计划，按计划进场。', NULL, '2022-04-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881413328207874', '已阅知，可开展工作。', 13, '2022-03-31', '同意', 11, '2022-04-01', '已进行技术交底和安全交底会议，并熟知。现场作业加强安全培训和技术把关。', NULL, '2022-04-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881413344985090', '已阅知，可开展工作。', 13, '2022-03-31', '同意', 11, '2022-04-01', '已进行技术交底和安全交底会议，并熟知。现场作业加强安全培训和技术把关。', NULL, '2022-04-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881413361762305', '已审阅，可开展工作。', 21, '2022-04-08', '同意', 11, '2022-04-08', '收到并确认项目', NULL, '2022-04-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881413378539521', '已阅核，可开展工作。', 21, '2022-04-08', '同意', 11, '2022-04-08', '已知晓项目要求，按计划进场工作', NULL, '2022-04-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881413395316737', '已阅核，可开展工作。', 21, '2022-04-08', '同意', 11, '2022-04-08', '已交底，作业实施过程严格按照规程、规范要求执行。', NULL, '2022-04-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881413412093953', '已阅核，可开展工作。', 13, '2022-03-25', '同意开展工作。', 10, '2022-03-25', '已进行安全、技术交底。', NULL, '2022-03-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881413428871170', '已阅知，可开展工作。', 13, '2022-03-24', '同意开展工作。', 10, '2022-03-25', '已知晓工作内容和技术要求', NULL, '2022-03-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881413441454081', '已阅知，可开展工作。', 13, '2022-03-24', '同意开展工作。', 10, '2022-03-25', '已知晓工作内容及技术要求', NULL, '2022-03-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881413462425602', '同意。', 21, '2022-03-28', '同意', 11, '2022-03-28', '已按计划进场数据采集', NULL, '2022-03-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881413483397121', '已阅知，可开展工作。进场作业须按地方政府要求做好森林防火工作，作业范围须与用户再次确认。', 13, '2022-03-23', '水下地形、河道断面任务多，必须严格执行安全生产规定，严禁人员水上作业，落实森林防火等其他安全措施。\r\n同意开展工作。', 10, '2022-03-24', '已完成安全及技术交底，按要求开展工作。', NULL, '2022-03-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881413500174338', '已阅知，可开展工作。', 13, '2022-03-23', '尽快开展工作。', 11, '2022-03-23', '按计划开展工作', NULL, '2022-03-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881413512757249', '已阅核，可开展工作。', 13, '2022-03-17', '控制测量工作内容按2022年3月18日讨论方案执行。\r\n测区条件艰苦，森林防火关键期，请制定落实管控方案，确保安全生产。\r\n同意开展工作。', 10, '2022-03-21', '已进行安全技术交底，按要求开展生产。', NULL, '2022-03-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881413529534465', '已阅知，可开展工作。工作量及范围须与甲方再沟通落实。', 13, '2022-03-10', '同意', 10, '2022-03-11', '已按照公司要求进行安全和技术交底', NULL, '2022-03-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881413550505985', '已阅，可开展工作。', 13, '2022-03-16', '请项目负责人（廖绍毅）落实项目安全、质量、进度管控措施，保障生产安全、产品合格。\r\n同意开展工作。', 10, '2022-03-16', '已组织进行安全、技术交底。', NULL, '2022-03-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881413567283202', '已阅核，可开展工作。', 13, '2022-03-10', '同意。', 10, '2022-03-10', NULL, NULL, '2022-03-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881413584060417', '已阅知，可开展工作。', 13, '2022-03-01', '请按规范规程要求作业，必须确保安全再开展涉水作业。\r\n同意开展工作。', 10, '2022-03-01', NULL, NULL, '2022-03-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881413605031938', '已阅。', 13, '2022-02-25', '同意。', 10, '2022-02-25', NULL, NULL, '2022-02-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881413626003458', '已阅知，可开展工作。', 13, '2022-02-25', '请两河口测量中心加强安全、质量、服务管理。\r\n同意。', 10, '2022-02-25', NULL, NULL, '2022-02-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881413651169282', '已阅知，可开展工作。', 13, '2022-02-24', '作业地点分散，面积较小，请项目负责人与甲方做好沟通，范围测足，减少补测。并与已有资料做好接边、校核。\r\n同意开展工作。', 10, '2022-02-24', NULL, NULL, '2022-02-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881413667946498', '已阅知，可开展工作。', 13, '2022-02-24', '请项目负责与甲方联系人沟通，测足范围，避免补测。\r\n同意开展工作。', 10, '2022-02-25', NULL, NULL, '2022-02-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881413684723714', '已阅知，可开展工作。', 13, '2022-02-17', '同意。', 10, '2022-02-21', '已认真做完安全及技术交底，严格执行。', NULL, '2022-02-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881413709889537', '已阅知，可开展工作。', 13, '2022-02-14', '同意。', 10, '2022-02-15', NULL, NULL, '2022-02-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881413730861058', '已核，可开展工作。', 13, '2022-01-29', '同意。', 10, '2022-01-29', '从项目经理处获悉已按要求在年前完成外业采集，正在进行内业处理工作。', NULL, '2022-02-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881413751832578', '已阅核。', 13, '2022-03-17', '同意。', 10, '2022-03-21', '已进行安全交底，技术已与技术负责沟通', NULL, '2022-03-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881413768609794', '已阅知。', 13, '2022-07-11', '同意开展工作', 11, '2022-07-11', '已开展工作', NULL, '2023-05-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881413785387010', '已核，可开展工作。', 13, '2022-01-20', '同意。', 10, '2022-01-21', '按照公司质量管理体系文件和公司作业技术流程实施。', NULL, '2022-01-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881413806358530', '已核，可开展工作。', 13, '2022-01-20', '同意，按计划开展', 7, '2022-01-20', NULL, NULL, '2022-02-10');
INSERT INTO `cmc_project_comment` VALUES ('1648881413827330049', '已核，可开展此项工作。', 13, '2022-01-20', '同意', 7, '2022-01-20', '按公司要求执行。', NULL, '2022-01-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881413844107265', '已核，可开展此项工作。', 13, '2022-01-20', '同意。', 10, '2022-01-21', '按照公司质量管理体系文件和公司作业技术流程实施。', NULL, '2022-01-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881413860884481', '已核，可开展工作。', 13, '2022-01-20', '同意。', 10, '2022-01-21', '按照公司质量管理体系文件和公司作业技术流程实施。', NULL, '2022-01-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881413877661698', '已核，可开展工作。', 13, '2022-01-14', '同意开展工作。1:500比例尺地形图范围，甲方暂未确定。', 10, '2022-01-14', '按公司要求执行', NULL, '2022-01-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881413894438914', '已阅知，可开展工作。用图要求须再与用户方负责人沟通明确。', 13, '2022-01-12', '同意。', 10, '2022-01-12', '已进行安全、技术交底。', NULL, '2022-01-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881413911216130', '已阅核，可开展工作。工期为暂定工期，视现场实际情况及时与成都院项目部沟通。', 13, '2022-01-10', '同意开展工作。\r\n参与部门、人员必须严格执行公司安全、质量管理规定，保障安全生产和产品质量。', 10, '2022-01-14', '已进行安全、技术交底。', NULL, '2022-01-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881413927993346', '已核，可开展工作。', 13, '2022-01-04', '同意。', 10, '2022-01-04', '已按公司要求进行安全和技术交底', NULL, '2022-01-04');
INSERT INTO `cmc_project_comment` VALUES ('1648881413948964865', '已核，可开展工作。', 13, '2022-01-04', '禁止人员水上作业。水边作业正确穿戴救生衣，并做好防护、应急措施。\r\n同意开展工作。', 10, '2022-01-04', '已组织进行了安全、技术交底。', NULL, '2022-01-04');
INSERT INTO `cmc_project_comment` VALUES ('1648881413965742081', '已阅核，可开展工作。', 13, '2022-01-07', '同意。', 10, '2022-01-07', NULL, NULL, '2022-01-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881413986713601', '已阅核，可开展工作。', 13, '2022-01-07', '同意。', 10, '2022-01-07', NULL, NULL, '2022-01-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881414003490818', '已核，可开展工作。', 13, '2022-01-04', '同意。', 10, '2022-01-04', '已按照公司要求进行了安全和技术交底', NULL, '2021-12-31');
INSERT INTO `cmc_project_comment` VALUES ('1648881414020268033', '已核，可开展工作。', 13, '2021-12-17', '同意。', 10, '2021-12-17', '已进行技术、安全交底。', NULL, '2021-12-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881414037045250', '已核，可开展工作。', 13, '2021-12-17', '同意。', 10, '2021-12-17', NULL, NULL, '2021-12-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881414049628162', '已阅知。', 13, '2021-12-09', '同意。', 10, '2021-12-09', NULL, NULL, '2021-12-10');
INSERT INTO `cmc_project_comment` VALUES ('1648881414066405377', '已阅知，跨年度项目，补登记。', 13, '2022-01-04', '同意。', 10, '2022-01-04', NULL, NULL, '2022-01-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881414066405378', '已核。', 13, '2023-05-18', '同意', 11, '2023-05-19', '尹超21年初在航测遥感中心时负责本项目。一切以航测遥感中心安排为主。', NULL, '2023-05-19');
INSERT INTO `cmc_project_comment` VALUES ('1648881414066405379', '已核，可以开展工作。', 20, '2023-12-12', '同意开展工作', 11, '2023-12-12', '项目正常运行中', NULL, '2024-03-05');
INSERT INTO `cmc_project_comment` VALUES ('1648881414078988290', '已阅知。', 13, '2021-12-01', '同意。', 10, '2021-12-01', '现场做好技术安全工作。', NULL, '2021-12-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881414095765505', '已阅知，可开展工作。', 13, '2021-12-03', '同意。', 10, '2021-12-05', '按要求执行', NULL, '2021-12-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881414116737025', '已阅知，可开展工作。', 13, '2021-12-01', '同意。', 10, '2021-12-01', NULL, NULL, '2021-12-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881414137708545', '已阅知，可开展工作。', 13, '2021-12-01', '同意。', 10, '2021-12-01', NULL, NULL, '2021-12-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881414154485761', '已阅知，可开展工作。', 13, '2021-12-01', '同意。\r\n严格按照安全生产、技术质量有关管理文件开展工作，落实安全、质量管理措施。', 10, '2021-12-01', NULL, NULL, '2021-12-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881414175457281', '已核，拟同意。', 13, '2021-11-28', '同意。项目工期根据现场情况，与甲方协调，满足甲方需要。', 10, '2021-11-29', '按照技术质量部要求执行生产流程。依据前期沟通试生产成果进行生产组织。', NULL, '2021-11-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881414192234498', '已核，拟同意。', 13, '2021-11-28', '同意。', 10, '2021-11-29', NULL, NULL, '2021-11-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881414213206018', '已阅知，拟同意开展工作。', 13, '2021-11-22', '同意。', 10, '2021-11-23', NULL, NULL, '2021-11-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881414234177537', '已阅知，拟同意。', 13, '2021-11-22', '同意。', 10, '2021-11-22', '已进行安全和技术交底，准备组织进场', NULL, '2021-11-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881414259343361', '已阅知，可开展工作。', 13, '2021-11-15', '同意开展工作。', 10, '2021-11-16', '已组织进行了安全技术交底。', NULL, '2021-11-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881414276120578', '已阅知，可开展工作。', 13, '2021-11-15', '同意开展工作。', 10, '2021-11-16', '已组织进行了安全技术交底。', NULL, '2021-11-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881414292897793', '已阅知，拟同意。', 13, '2021-11-22', '同意开展工作。', 10, '2021-11-22', '已进行安全、技术交底。', NULL, '2021-11-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881414313869314', '已阅知，可开展工作，我部将及时跟进合同签订事宜。', 13, '2021-11-11', '同意。', 10, '2021-11-11', NULL, NULL, '2021-11-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881414334840833', '已阅知，可开展工作，水上作业须符合公司及业主方安全生产规定及要求。', 13, '2021-11-11', '请项目管理部加强安全、技术、质量管控，保障安全生产及产品质量。\r\n同意开展工作。', 10, '2021-11-11', '已知作业范围及相关要求，并进行安全与技术交底。', NULL, '2021-11-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881414355812353', '已阅知，可开展工作。', 13, '2021-11-11', '同意开展工作。', 10, '2021-11-11', '已知作业范围及相关要求，并进行安全和技术交底。', NULL, '2021-11-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881414372589569', '已核，可开展工作。', 13, '2021-12-17', '同意。水下地形部分根据实地情况，不能保证人员设备安全的区域不作业并报项目管理部。', 10, '2021-12-22', '已进行安全、技术交底。', NULL, '2021-12-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881414389366785', '已核，拟同意。所有地形图测绘改为地形地类图测绘。五等控制点布置在坝址区、厂址区、大支沟、居民地等关键部位。', 13, '2021-11-05', '同意开展工作。', 10, '2021-11-05', NULL, NULL, '2021-11-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881414410338305', '已核，拟同意。', 13, '2021-11-05', '同意开展工作。', 10, '2021-11-09', '已进行安全和技术交底，知晓项目要求及概况。', NULL, '2021-11-10');
INSERT INTO `cmc_project_comment` VALUES ('1648881414431309825', '已阅知，可开展工作。', 13, '2021-11-04', '同意开展工作。', 10, '2021-11-04', '已接受交底。', NULL, '2021-11-04');
INSERT INTO `cmc_project_comment` VALUES ('1648881414456475649', '已阅知，可以开展工作。', 13, '2021-10-26', '同意。', 10, '2021-10-26', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881414473252866', '已阅知，可以开展工作。', 13, '2021-10-26', '同意。', 10, '2021-10-26', '已组织进行安全技术交底', NULL, '2021-10-26');
INSERT INTO `cmc_project_comment` VALUES ('1648881414490030081', '已阅知，拟同意。', 13, '2021-10-18', '同意。', 10, '2021-10-18', NULL, NULL, '2021-10-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881414511001602', '已核，可以开展工作。', 13, '2021-10-14', '同意。', 10, '2021-10-17', '同意', NULL, '2021-10-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881414527778817', '已阅知，请加强和用户沟通，尽量不影响项目的总体进度安排，我部将及时跟进合同签订。', 13, '2021-10-18', '同意。', 10, '2021-10-18', '已组织项目参与人员进行了安全、技术交底。', NULL, '2021-10-19');
INSERT INTO `cmc_project_comment` VALUES ('1648881414544556034', '已阅知，可开展工作。', 13, '2021-12-21', '同意。', 10, '2021-12-22', '工作进展顺利。', NULL, '2021-12-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881414565527553', '已阅知。请承担部门加强与用户沟通，工作内容及工作量如有调整请及时告知我部门，工作完成后及时将完成的工作量报送至我部。', 13, '2021-10-13', '同意。', 10, '2021-10-13', NULL, NULL, '2021-11-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881414582304770', '已阅知。完成工作量及时报给我部。', 13, '2021-10-13', '同意。\r\n请项目管理部落实安全、质量、进度管控。', 10, '2021-10-13', NULL, NULL, '2021-10-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881414603276289', '已阅知。', 13, '2021-10-09', '同意开展工作。', 10, '2021-10-09', '已交底，按照公司交底要求进行现场作业。', NULL, '2021-10-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881414624247809', '已阅知，请作业部门加强与用户方沟通，我部落实合同签订事宜。', 13, '2021-10-09', '同意开展工作。', 10, '2021-10-09', '按照合同及技术要求进行生产作业。', NULL, '2021-10-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881414641025025', '已阅知，该项目为重大项目。任务量大且范围广，请做好生产组织安排，加强与用户各专业沟通，我部及时商签合同。', 13, '2021-09-30', '项目负责人、外业负责人：杨振；内业负责人：吴振。子公司（负责人：黄梅琳）、云南分公司（负责人：林方迁）承担部分库区地形地类图工作。\r\n请项目负责人、内业负责人加强管理与协调，安全、优质、按期完成项目任务。\r\n同意开展工作。', 10, '2021-10-07', '已知悉全部工作内容及要求，保证按时保质保安全完成任务。', NULL, '2021-10-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881414657802242', '已阅知，我部将及时跟进合同签订事宜。', 13, '2021-09-30', '水下地形测绘，必须按规定做好安全管理，保证安全专业。\r\n同意开展工作。', 10, '2021-09-30', '已组织进行安全、技术交底。', NULL, '2021-09-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881414674579458', '已阅知，我部将及时跟进合同签订事宜。', 13, '2021-09-29', '同意开展工作。', 10, '2021-09-30', NULL, NULL, '2021-09-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881414695550978', '已核，请作业单位沟通确定工作内容及范围，及时将完成工作量报送我部门。', 13, '2021-09-18', '同意。', 10, '2021-09-22', '已安排2021.9.24进场。', NULL, '2021-09-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881414712328193', '已核。', 13, '2021-09-16', '同意开展工作。', 10, '2021-09-16', NULL, NULL, '2021-09-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881414729105410', '已阅知，我部将及时跟进合同签订事宜。如有不明处，请及时跟用户联系。', 13, '2021-09-10', '同意。', 10, '2021-09-10', '已进行安全、技术交底。', NULL, '2021-09-10');
INSERT INTO `cmc_project_comment` VALUES ('1648881414750076930', '已核，拟同意。', 13, '2021-09-26', NULL, 7, '2021-12-16', '认真学习安全技术交底内容，合理安排开展工作。', NULL, '2022-03-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881414775242753', '已核，请加强和用户沟通，我部将及时跟进合同签订事宜。', 13, '2021-09-07', '高原地区作业，根据测区条件，做好安全防控措施，按规范要求作业，保证安全生产和产品质量。', 10, '2021-09-08', '任务已明确，安全技术交底已做，正常安排生产。', NULL, '2021-09-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881414796214274', '已核。', 13, '2021-09-02', '同意。', 10, '2021-09-08', '已交底', NULL, '2021-09-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881414812991489', '已阅知，我部将及时跟进合同签订事宜。', 13, '2021-09-01', '同意。', 10, '2021-09-02', '我公司已知晓全部工作内容及要求，及时进场开展工作，。', NULL, '2021-09-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881414859128834', '已核，我部将及时跟进合同签订事宜。', 13, '2021-09-02', '同意开展工作。', 10, '2021-09-02', '已进行安全技术交底。', NULL, '2021-09-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881414880100353', '已阅核，拟同意开展工作。', 13, '2021-08-26', '同意。', 10, '2021-08-26', '已进行安全技术交底，对重要风险进行强调。', NULL, '2021-08-26');
INSERT INTO `cmc_project_comment` VALUES ('1648881414905266178', '已阅核，现场负责人与用户沟通工作内容及范围，工作完请及时将完成工作量报我部，我部将及时跟进合同签订。', 13, '2021-08-26', '同意开展工作。', 10, '2021-08-26', '已组织项目参与人员进行了安全、技术交底。', NULL, '2021-08-26');
INSERT INTO `cmc_project_comment` VALUES ('1648881414926237697', '已阅核，公路测量、特征点测量、ML电站涉及永久基本农田范围坐标转换等工作已由杨振部门完成，不要做重复工作。我部将及时跟进合同签订事宜。现场如有变化部分，及时通知我部。', 13, '2021-08-23', '按项目实际情况，制定并落实安全生产管控措施。请项目参与部门加强协调，确保安全、优质、按期完成项目工作。\r\n同意开展工作。', 10, '2021-08-24', NULL, NULL, '2021-08-26');
INSERT INTO `cmc_project_comment` VALUES ('1648881414951403522', '已阅知，尽快确定工作方案，我部好有针对性报价，另拉哇库尾地形图需测水下地形。', 13, '2021-08-20', '测区交通、自然条件差，必须制定、落实安全生产管控措施，确保安全方可作业。自然河道禁止水上作业，禁止野外用火。\r\n同意开展工作，请与甲方做好沟通，不具备作业条件的，及时报告。', 10, '2021-08-20', NULL, NULL, '2021-08-20');
INSERT INTO `cmc_project_comment` VALUES ('1648881414976569346', '已确认，我部将及时将及时跟进合同签订事宜。', 13, '2021-08-16', '同意。', 10, '2021-08-16', '2021年8月16日，C301会议室进行安全及技术交底，部门已对安全及技术重要事项做进一步强调。\r\n内业部分由德方公司承担，已顺利进行中。', NULL, '2021-08-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881415001735169', '已阅知，请现场负责人找用户方签工作量签证单。', 13, '2021-08-13', '同意。', 10, '2021-08-13', NULL, NULL, '2021-08-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881415026900993', '拟同意，我部将及时跟进合同签订事宜。', 13, '2021-08-11', '同意。', 10, '2021-08-12', NULL, NULL, '2021-08-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881415047872514', '已阅知，我部将及时跟进合同签订事宜。', 13, '2021-08-11', '同意。 ', 10, '2021-08-11', NULL, NULL, '2021-08-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881415064649729', '已阅知，我部将及时跟进合同签订事宜。', 13, '2021-08-11', '因项目规划调整，原计划测绘范围只外业采集点云数据（委外），新部位按甲方要求采集无人机航拍相片。具体工作内容以实际完成工作为准。项目调整联系人：陈军，13320964221。', 10, '2021-08-11', '已按要求组织开展安全技术交底', NULL, '2021-08-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881415186284546', '已阅知，我部将及时跟进合同签订事宜。', 13, '2021-08-11', '同意。', 10, '2021-08-11', NULL, NULL, '2021-08-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881415219838978', '已阅知。', 13, '2021-08-11', '同意。', 10, '2021-08-11', NULL, NULL, '2021-08-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881415240810497', '已阅知，我部将及时跟进合同签订事宜。', 13, '2021-08-11', '同意。', 10, '2021-08-11', '1、人员进场前参加公司组织的安全及技术交底会议；\r\n2、人员进场前，部门进行安全及技术交底。', NULL, '2021-08-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881415265976322', NULL, NULL, NULL, '遵守新冠疫情防控相关规定。加强与甲方沟通协调。\r\n同意。', 10, '2021-08-04', NULL, NULL, '2021-08-04');
INSERT INTO `cmc_project_comment` VALUES ('1648881415286947841', '已阅知，我部将及时或督促相关人员签订合同。', 13, '2021-07-27', '测区位于雅砻江中游，地形陡峭、交通条件较差，外业承担部门必须结合测区情况、气候特点做好危险源辨识并制定、落实管控措施，保证安全生产。', 10, '2021-07-28', '1、任务下达后，按照公司要求开展了安全、技术交底会议；\r\n2、人员进场前，部门对项目经理及作业人员进行了安全及技术交底工作；', NULL, '2021-07-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881415316307970', '已阅知。', 13, '2021-07-27', '同意。', 10, '2021-07-28', '已安排。', NULL, '2021-07-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881415333085186', '已阅知，前期由何杰对接工作事项，建议由地理信息中心承担实施。', 13, '2021-07-27', '同意。', 10, '2021-07-28', NULL, NULL, '2021-07-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881415349862402', NULL, NULL, NULL, '同意。', 10, '2021-07-28', NULL, NULL, '2021-07-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881415362445314', '已阅知。', 13, '2021-07-27', '同意。', 7, '2021-07-28', '收到并确认项目。', NULL, '2021-07-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881415375028225', '已阅知，我部将及时跟进合同签订事宜。', 13, '2021-07-27', '同意。', 10, '2021-07-28', '已组织项目参与人员进行了安全、技术交底。', NULL, '2021-07-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881415395999745', '已阅知。', 13, '2021-07-27', '激光技术部负责无人机飞行数据采集，其余工作由德方公司承担。\r\n同意开展工作。', 10, '2021-08-03', '已确认', NULL, '2021-07-26');
INSERT INTO `cmc_project_comment` VALUES ('1648881415412776962', '已阅知，我部将及时跟进合同签订事宜。', 13, '2021-07-27', '同意。', 10, '2021-07-28', NULL, NULL, '2021-07-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881415429554178', '水下地形部分提交时间需与用户方沟通，我部将及时跟进合同签订事宜。', 13, '2021-07-27', '同意。', 10, '2021-07-28', NULL, NULL, '2021-07-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881415446331394', '已阅核，我部将及时跟进合同签订事宜。', 13, '2021-07-21', '同意开展工作。', 10, '2021-07-21', NULL, NULL, '2021-07-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881415458914305', '已阅知，我部将及时跟进合同签订事宜。', 13, '2021-07-16', '同意开展工作。', 10, '2021-07-16', NULL, NULL, '2021-07-26');
INSERT INTO `cmc_project_comment` VALUES ('1648881415475691522', '已阅知，我部将及时跟进合同签订事宜。', 13, '2021-07-13', '测绘工程中心一部负责外业像控、调绘补测；航测遥感中心负责地形图、正射影像内业；激光技术部负责三维模型制作。\r\n同意开展工作。', 10, '2021-07-16', NULL, NULL, '2021-07-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881415492468738', '已核，我部将及时跟进合同签订事宜。', 13, '2021-07-16', '高海拔山区，雨季作业，按规定做好安全风险辨识于管控，保证安全生产。\r\n外业返回前，与甲方做好点位移交工作。\r\n同意开展工作。', 10, '2021-07-16', '本周三上午在会议室已进行安全交底和技术交底', NULL, '2021-07-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881415513440258', '已阅知，将督促相关人员签订合同。', 13, '2021-07-07', '同意，', 10, '2021-07-08', NULL, NULL, '2021-07-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881415530217473', '已阅知，请项目负责人及时将完成工作量或变化情况报我部门，我部门将及时跟进合同签订事宜。', 13, '2021-07-07', '同意开展工作。', 10, '2021-07-08', '接收任务，开展工作', NULL, '2021-07-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881415551188994', '已阅知，我部将及时跟进合同签订事宜。', 13, '2021-07-06', '同意开展工作。', 10, '2021-07-07', '接收任务，开展工作', NULL, '2021-07-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881415567966210', NULL, NULL, NULL, '同意开展工作。\r\n测绘工程中心二部负责外业，航测遥感中心负责地形图内业，地理信息中心负责实景三维内业。', 10, '2021-07-02', '已组织进行安全、技术交底。', NULL, '2021-07-02');
INSERT INTO `cmc_project_comment` VALUES ('1648881415588937730', '我部将及时跟进合同签订事宜。', 13, '2021-06-28', '严格按照技术设计书、安全生产相关规程作业，保证安全生产和产品质量。\r\n同意开展工作。', 10, '2021-06-28', '严格执行技术方案、严格安全生产', NULL, '2021-06-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881415609909250', '已阅知，我部门及时跟进合同签订事宜。', 13, '2021-06-23', '同意开展工作。', 10, '2021-06-23', NULL, NULL, '2021-06-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881415630880769', NULL, NULL, NULL, '同意开展工作。利用2020年航飞资料测图，外业调绘。工作量已根据甲方最新要求修改。', 10, '2021-06-24', '航测遥感中心重新空三、补测。外业调绘及修补测。', NULL, '2021-06-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881415647657985', '已阅知，我部门及时跟进合同签订事宜。', 13, '2021-06-23', '同意开展工作。', 10, '2021-06-23', NULL, NULL, '2021-06-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881415668629506', '已核，已修改工作量，请重新复核成本。我部及时跟进合同签订事宜。', 13, '2021-06-08', '同意开展工作。', 10, '2021-06-08', NULL, NULL, '2021-06-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881415685406721', '已核，及时跟进合同签订。', 13, '2021-06-02', '同意。', 10, '2021-06-04', NULL, NULL, '2021-06-04');
INSERT INTO `cmc_project_comment` VALUES ('1648881415706378241', '已核，及时跟进合同签订。', 13, '2021-06-02', '同意。', 10, '2021-06-04', NULL, NULL, '2021-06-10');
INSERT INTO `cmc_project_comment` VALUES ('1648881415727349761', '已阅核，加强与用户方沟通，如有变化及时报我部。我部将及时跟踪落实合同签订事宜。', 13, '2021-05-31', '同意。', 10, '2021-06-01', '严格做好安全交底，保证安全作业。', NULL, '2021-06-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881415748321281', '已核，即将跟踪落实合同签订事宜。', 13, '2021-05-24', '同意。', 10, '2021-05-25', NULL, NULL, '2021-05-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881415765098497', '已核，现场情况如有变化及时通报我部，我部将跟踪落实合同签订事宜。', 13, '2021-05-14', '同意。', 10, '2021-05-17', NULL, NULL, '2021-05-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881415781875714', '合同已签订，请按时提交成果资料。', 13, '2021-05-17', '同意。请项目管理部做好安全、质量、进度管理。', 10, '2021-05-19', NULL, NULL, '2021-05-20');
INSERT INTO `cmc_project_comment` VALUES ('1648881415798652929', '已核，请按任务书要求施测，及时与项目部沟通。我部跟踪落实合同签订事宜。', 20, '2021-05-08', '请项目管理部落实安全、质量管控措施，确保安全生产和产品质量合格。\r\n同意开展工作。', 10, '2021-05-17', NULL, NULL, '2021-05-19');
INSERT INTO `cmc_project_comment` VALUES ('1648881415815430146', '已核，将及时跟进合同签订事宜。', 13, '2021-05-07', '同意。', 10, '2021-05-07', '已经接受安全交底。', NULL, '2021-05-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881415832207361', '已核，将及时跟踪落实合同签订事宜。', 13, '2021-04-30', '同意开展工作。高海拔地区，落实安全管控措施，确保安全生产。', 10, '2021-04-30', '已组织项目参与人员进行了安全及技术交底工作。', NULL, '2021-04-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881415844790273', '增加“ML电站涉及永久基本农田范围坐标转换”工作项，请李胜才跟踪落实甲方内部任务通知单，并将落实合同签订事宜。', 13, '2021-05-07', '同意开展工作。', 10, '2021-05-07', '已组织进行安全技术交底。', NULL, '2021-05-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881415861567490', '已核，将及时跟踪落实合同签订事宜。', 13, '2021-04-23', '做好安全管控措施，确保安全生产。', 10, '2021-04-25', NULL, NULL, '2021-04-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881415878344705', '已核，将及时跟踪落实合同签订事宜。', 13, '2021-04-29', '背崩、多雄河区域已进入雨季，按《安全生产管理文件》规定制定并落实安全专项措施，确保安全生产和产品质量。\r\n同意开展工作。', 10, '2021-04-30', '已组织项目参与人员进行安全、技术交底。', NULL, '2021-04-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881415895121921', '已核，请及时与城乡发展工程分公司潘飞处联系，即将跟踪落实合同签订事宜。', 13, '2021-05-08', '同意开展工作。', 10, '2021-05-11', NULL, NULL, '2021-05-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881415911899138', '已核，请及时与城乡发展工程分公司潘飞处联系，即将跟踪落实合同签订事宜。', 13, '2021-05-08', '同意开展工作。', 10, '2021-05-11', NULL, NULL, '2021-05-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881415932870657', '已核，马上跟踪落实合同签订事宜。', 13, '2021-04-22', '同意开展工作。', 10, '2021-04-25', '已组织项目参与人员进行了安全、技术交底工作。', NULL, '2021-04-26');
INSERT INTO `cmc_project_comment` VALUES ('1648881415949647874', '已核。', 13, '2021-04-23', '同意开展工作。', 10, '2021-04-25', '已组织项目参与人员进行安全、技术交底，确保安全生产。', NULL, '2021-04-26');
INSERT INTO `cmc_project_comment` VALUES ('1648881415962230785', '已核，及时跟踪落实合同签订事宜。', 13, '2021-04-19', '同意。', 10, '2021-04-19', NULL, NULL, '2021-04-19');
INSERT INTO `cmc_project_comment` VALUES ('1648881415979008002', '已阅知，及时跟踪落实合同签订事宜。', 13, '2021-04-19', '同意开展工作。外业结束，现场做好控制点交点工作。', 10, '2021-04-20', NULL, NULL, '2021-04-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881415991590913', '已阅知，及时跟踪落实合同签订事宜。', 13, '2021-04-19', '同意开展工作。', 10, '2021-04-20', NULL, NULL, '2021-04-19');
INSERT INTO `cmc_project_comment` VALUES ('1648881416012562433', '按照已有激光数据范围成图。', 13, '2021-04-14', '同意开展工作。', 10, '2021-04-15', NULL, NULL, '2021-04-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881416029339649', '已核，请注意水下作业时间，汛期严禁水上作业。', 13, '2021-04-14', '同意开展工作。', 10, '2021-04-15', NULL, NULL, '2021-04-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881416046116866', '已阅核，尽快跟踪落实合同签订。', 13, '2021-04-14', '同意开展工作。', 10, '2021-04-15', NULL, NULL, '2021-04-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881416062894082', '已核。', 13, '2021-04-14', '同意开展工作。', 10, '2021-04-15', NULL, NULL, '2021-04-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881416083865601', '已阅核。', 13, '2021-04-14', '同意。', 10, '2021-04-14', NULL, NULL, '2021-05-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881416100642818', '已核。', 13, '2021-04-14', '同意。', 10, '2021-04-14', NULL, NULL, '2021-04-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881416117420033', '已阅知，即将跟踪合同事宜。', 13, '2021-04-06', '同意开展工作。', 10, '2021-04-06', NULL, NULL, '2021-05-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881416130002945', '已阅知，即将跟踪落实合同签订事宜。', 13, '2021-04-06', '同意开展工作。', 10, '2021-04-06', '按要求和规范执行', NULL, '2021-04-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881416146780162', '已阅知，即将跟踪落实合同签订事宜。', 13, '2021-04-06', '同意开展工作。', 10, '2021-04-06', NULL, NULL, '2021-04-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881416163557378', '用户测图范围发错，已更正为八窝龙施工场地1:500地形图补测。', 20, '2021-03-22', '两侧与2019年测绘地形图接边。\r\n同意开展工作。', 10, '2021-03-22', '已组织项目参与人员进行安全、技术交底。', NULL, '2021-03-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881416184528898', NULL, NULL, NULL, '加强安全生产管理、落实安全生产措施，严格执行涉水作业相关规定，确保安全生产和产品质量合格。\r\n同意开展工作。', 10, '2021-03-23', '生产过程中严格按安全交底条款执行。', NULL, '2021-03-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881416197111809', '满足用户需求，并严格按照测绘规程规范和测绘技术方案作业。', 20, '2021-03-18', '落实现场工作安全管理（包括数据采集）措施，加强与甲方、内部沟通协调，做好项目策划与管理，保障安全生产与产品质量。控制测量工作，在现场落实已有控制并报告后，根据实际需要布测。\r\n同意开展工作。', 10, '2021-03-19', NULL, NULL, '2021-03-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881416213889025', '按测绘规程规范和用户要求开展内外业工作。', 20, '2021-03-17', '落实安全管控措施与技术质量要求，加强内、外沟通，保证安全生产与产品质量符合要求。\r\n同意开展工作。', 10, '2021-03-22', '已组织现有项目参与人员进行技术、安全交底。', NULL, '2021-03-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881416226471938', '加强与用户的沟通和协调，满足用户需求。', 20, '2021-03-11', '同意。', 10, '2021-03-11', NULL, NULL, '2021-03-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881416243249154', '拟同意', 15, '2021-03-10', '同意。', 10, '2021-03-11', NULL, NULL, '2021-03-12');
INSERT INTO `cmc_project_comment` VALUES ('1648881416260026369', '加强与用户的沟通和协调，满足用户需求。', 20, '2021-03-11', '同意。', 10, '2021-03-11', NULL, NULL, '2021-03-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881416276803586', '加强与用户的沟通和协调，满足用户需求。', 20, '2021-03-11', '同意。', 10, '2021-03-11', NULL, NULL, '2021-03-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881416293580802', '适当布置控制点，满足用户需求。', 20, '2021-03-10', '项目地点分散，做好与甲方沟通，确保安全生产与产品质量。\r\n同意开展工作。', 10, '2021-03-10', '按公司生产管理、质量要求执行。', NULL, '2021-03-10');
INSERT INTO `cmc_project_comment` VALUES ('1648881416310358017', '满足用户要求', 20, '2021-03-10', '同意开展工作。', 10, '2021-03-10', NULL, NULL, '2021-03-10');
INSERT INTO `cmc_project_comment` VALUES ('1648881416327135233', '满足用户和规程规范要求。', 20, '2021-03-04', '同意开展工作。\r\n现场测、放点应有检查条件，保证测量成果正确。', 10, '2021-03-04', '已进行技术、安全交底。', NULL, '2021-03-05');
INSERT INTO `cmc_project_comment` VALUES ('1648881416343912449', '满足用户要求，执行相关的规程规范，保证保量地完成测绘任务。', 20, '2021-03-04', '做好安全管控，确保安全生产。\r\n同意开展工作。', 10, '2021-03-04', NULL, NULL, '2021-03-05');
INSERT INTO `cmc_project_comment` VALUES ('1648881416360689665', '项目名称变更为：瀑布沟水电站武警营房扩建等1:500地形图，其它不变。', 20, '2021-03-03', '同意开展工作。', 10, '2021-03-03', '按要求安全生产', NULL, '2021-03-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881416377466882', '加强与用户的沟通与协调。', 20, '2021-03-03', '做好与科研院、项目业主、地方工作人员、合作单位的沟通与协调，做好安全生产管控，确保安全生产和产品质量。项目委托合作单位参加，委托费用按预算单价，根据实际完成工作量计算。\r\n同意开展工作。', 10, '2021-03-03', '已经给项目经理刘洋作了详细安全交底。', NULL, '2021-03-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881416394244098', '按时保质保量地完成任务要求。', 20, '2021-02-08', '同意开展工作。', 10, '2021-02-08', '按上述要求及时完成工作。', NULL, '2021-02-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881416411021314', '满足用户要求，严格按照规程规范和技术设计书作业。', 20, '2021-02-02', '严格执行安全生产管理规定，遵守项目地边境管理及地方放政策，保证安全生产；做好外业修、补测及调绘工作、加强内外业联系协调，保证产品质量。\r\n同意开展工作。', 10, '2021-02-03', '严格按照要求开展工作', NULL, '2021-02-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881416427798530', '加强与用户的沟通与协调。', 20, '2021-02-01', '严格执行安全生产管理规定，遵守项目地边境管理及地方放政策，保证安全生产；做好外业修、补测及调绘工作、加强内外业联系协调，保证产品质量。\r\n同意开展工作。', 10, '2021-02-03', '严格按照要求开展工作', NULL, '2021-02-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881416444575746', '满足用户要求，严格按照规程规范和技术设计书作业。', 20, '2021-02-02', '同意开展工作。', 10, '2021-02-02', '按要求安全作业', NULL, '2021-02-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881416465547266', '满足用户要求，严格按照规程规范和技术设计书作业。', 20, '2021-02-02', '严格执行安全生产管理规定，遵守项目地边境管理及地方放政策，保证安全生产；做好外业修、补测及调绘工作、加强内外业联系协调，保证产品质量。\r\n同意开展工作。', 10, '2021-02-03', '严格按照要求开展工作', NULL, '2021-02-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881416482324482', '同意', 15, '2021-02-22', '做好新冠疫情防控，确保安全生产和产品质量合格。', 10, '2021-02-22', NULL, NULL, '2021-01-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881416499101698', '按用户的给定范围进场开展工作。并做好沟通和协调工作，注意安全。', 20, '2021-01-25', '同意开展工作。', 10, '2021-01-28', NULL, NULL, '2021-01-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881416520073217', '同意', 15, '2021-02-22', '同意开展工作。', 10, '2021-02-22', '按要求执行', NULL, '2021-02-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881416536850434', '满足用户要求，并严格按照测绘规程规范执行。', 20, '2021-01-20', '同意开展工作。', 10, '2021-02-22', NULL, NULL, '2021-02-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881416557821953', '拟同意', 15, '2021-01-15', '同意。', 10, '2021-01-15', NULL, NULL, '2021-02-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881416578793474', '拟同意', 15, '2021-01-15', '同意。', 10, '2021-01-15', NULL, NULL, '2021-02-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881416603959298', '满足用户要求，并按相关规程规范执行。', 20, '2021-01-18', '同意开展工作。', 10, '2021-01-18', '按照相关规范执行该项目，并保证现场安全，', NULL, '2021-01-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881416620736513', '拟同意', 15, '2021-01-22', '同意。', 10, '2021-01-22', NULL, NULL, '2021-01-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881416641708034', '拟同意', 15, '2021-01-15', '同意。', 10, '2021-01-15', NULL, NULL, '2021-02-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881416658485250', '按用户要求执行。', 20, '2021-01-14', '同意开展工作。', 10, '2021-01-15', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881416679456770', '已阅知，请项目负责人认真研读合同，过程中变更及时告知我部门。', 13, '2021-03-19', '加强安全生产管理，保证安全生产。预算费用为项目年度整体委托费用。\r\n同意开展工作。', 10, '2021-03-22', '收到，按要求开展工作。', NULL, '2021-03-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881416700428290', '满足用户要求', 20, '2021-01-22', '同意。', 10, '2021-01-22', '已确认。', NULL, '2021-01-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881416721399809', '按甲方要求进行测绘。', 20, '2021-01-14', '同意开展工作。请加强与甲方的沟通，了解甲方需求，落实安全管控措施，保证安全生产和测绘产品满足甲方需要。', 10, '2021-01-15', NULL, NULL, '2021-01-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881416742371330', '拟同意', 15, '2021-01-14', '同意。', 10, '2021-01-15', NULL, NULL, '2021-02-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881416759148545', '加强与用户沟通与协调。', 20, '2021-01-13', '同意开展工作。勘测实施计划中，地形图测绘以外的工作在项目2020C58、2020C14完成。冬季作业、涉水作业，按要求制定并落实安全管控措施，确保安全生产，保证产品质量。', 10, '2021-01-13', NULL, NULL, '2021-01-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881416792702977', '满足甲方要求，按相关规程规范执行。', 20, '2021-01-13', '做好技术设计、落实安全管控措施，保障安全生产和产品质量。', 10, '2021-01-13', '现场一切工作与生活行为均在保证安全的前提下进行，做到安全事故、质量事故零发生。', NULL, '2021-01-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881416830451713', '拟同意', 15, '2021-01-08', '同意。', 10, '2021-01-08', NULL, NULL, '2021-01-10');
INSERT INTO `cmc_project_comment` VALUES ('1648881416864006146', '拟同意', 15, '2021-01-08', '同意。', 10, '2021-01-08', NULL, NULL, '2021-02-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881416901754881', '尽快办理合同，拟同意', 15, '2021-01-12', '同意开展工作。', 10, '2021-01-12', '按要求开展工作', NULL, '2021-02-09');
INSERT INTO `cmc_project_comment` VALUES ('1648881416935309313', '同意', 15, '2021-01-05', '同意开展工作。', 10, '2021-01-05', NULL, NULL, '2021-01-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881416973058050', '满足用户要求。', 20, '2020-12-30', '落实安全管控措施，确保安全生产。', 10, '2021-01-27', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881417006612482', '按用户要求办理批文和进场工作。', 20, '2020-12-30', '同意开展工作。', 10, '2020-12-31', NULL, NULL, '2020-12-31');
INSERT INTO `cmc_project_comment` VALUES ('1648881417044361218', '明确工作内容和工作量，并按相应规范作业。', 20, '2020-12-29', '同意开展工作。', 10, '2020-12-30', '已进场开展工作。', NULL, '2020-12-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881417077915649', '已签订合同，同意进场开展工作', 15, '2020-12-25', '同意开展工作。', 10, '2020-12-29', '已交底。', NULL, '2020-12-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881417115664385', '同意', 15, '2020-12-29', '同意开展工作。', 10, '2020-12-29', '已按照公司安全生产制度、技术设计书进行交底工作。', NULL, '2020-12-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881417149218818', '满足规程规范和用户要求。', 20, '2020-12-25', '同意开展工作。', 10, '2020-12-28', '已确认。', NULL, '2020-12-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881417186967554', '满足用户需求。', 20, '2020-12-29', '同意开展工作。', 10, '2020-12-29', '已开展相应工作。', NULL, '2020-12-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881417224716290', '按相关规程规范完成任务。', 20, '2020-12-22', '同意开展工作。', 10, '2020-12-23', NULL, NULL, '2020-12-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881417262465026', '保证安全的前提下保质保量地完成任务。', 20, '2020-12-22', '落实安全生产措施，禁止人员水上作业，水边作业正确穿戴救生衣，保障安全生产、保证产品质量。', 10, '2020-12-23', NULL, NULL, '2020-12-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881417296019457', '保证质量，尽快完成。', 20, '2020-12-08', '同意。', 10, '2020-12-08', NULL, NULL, '2020-12-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881417333768193', '按照技术质量部要求执行。', 20, '2020-12-17', '同意开展工作。', 10, '2020-12-23', '合理安排现场工作，按技术质量部要求执行。', NULL, '2020-12-23');
INSERT INTO `cmc_project_comment` VALUES ('1648881417367322626', '同意进场，我部门跟进签合同事宜', 15, '2020-12-04', '同意开展工作。', 10, '2020-12-04', '已接到并明确生产任务。', NULL, '2020-12-04');
INSERT INTO `cmc_project_comment` VALUES ('1648881417400877057', '同意', 15, '2020-12-04', '同意开展工作。', 10, '2020-12-04', '确认范围，开始生产准备。', NULL, '2021-03-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881417438625793', '多与用户现场沟通，确定提交资料时间。', 20, '2020-11-20', '同意开展工作。', 10, '2020-11-20', NULL, NULL, '2020-11-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881417472180225', '联系地质人员现场指定范围。', 20, '2020-11-25', '同意开展工作。', 10, '2020-11-30', '明确生产任务，准备开展项目。', NULL, '2020-12-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881417509928962', '测绘工期请与用户联系落实。', 20, '2020-11-30', '落实、执行安全生产措施和技术方案，保证安全生产和测绘产品质量。', 10, '2020-11-30', '明确作业目标', NULL, '2020-12-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881417539289089', '按照规范和任务书执行，注意安全。', 20, '2020-11-20', '根据项目高海拔地区、含水下地形测绘等工作内容、测区条件制定安全生产管理措施并严格执行。', 10, '2020-11-24', NULL, NULL, '2020-11-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881417564454914', '完成后现场及时交点，并做好移交手续。', 20, '2020-11-17', '同意。', 10, '2020-11-17', '已进行安全、技术交底。严格按规范要求作业。', NULL, '2020-11-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881417644146689', '同意', 15, '2020-11-12', '落实安全管理措施，按规范要求作业，确保安全生产和产品质量优良。', 10, '2020-11-15', NULL, NULL, '2020-11-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881417707061250', '严格按照相应规程规范和技术设计书执行。', 20, '2020-11-17', NULL, 7, '2020-11-24', '已收到', NULL, '2020-12-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881417723838466', '同意', 15, '2020-11-12', '落实安全管理措施，按规范要求作业，确保安全生产和产品质量合格。', 10, '2020-11-15', NULL, NULL, '2020-11-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881417736421378', '尽量争取在11月20日完成。', 20, '2020-11-12', '同意开展工作。', 10, '2020-11-12', NULL, NULL, '2020-11-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881417753198593', '根据用户需求转换坐标。', 20, '2020-11-04', '同意开展工作。', 10, '2020-11-04', NULL, NULL, '2020-11-04');
INSERT INTO `cmc_project_comment` VALUES ('1648881417769975809', '加强与用户沟通，充分了解用户的需求。', 20, '2020-10-30', '同意开展工作。\r\n冬季川藏高原地区气温低、有道路积雪、路况复杂、沿江工作线路长，按规定制定并落实安全管控措施，确保安全生产。', 10, '2020-10-31', '已与外业项目负责人程昊及项目参与人员进行了安全、技术交底。已与内业项目负责人程昊及项目参与人员进行了安全、技术交底。', NULL, '2020-10-31');
INSERT INTO `cmc_project_comment` VALUES ('1648881417782558721', '了解用户需求，保证测图精度。', 20, '2020-10-27', '同意开展工作。', 10, '2020-10-28', NULL, NULL, '2020-10-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881417795141633', '事先与用户多沟通，明确任务内容和侧重点。', 20, '2020-10-27', '同意开展工作。', 10, '2020-10-28', '同意', NULL, '2020-10-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881417807724546', '做好安全防护措施，规范作业。', 20, '2020-10-20', '同意开展工作。按相关规定做好安全生产管理。', 10, '2020-10-21', '已按公司要求进行安全及技术交底。', NULL, '2020-10-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881417820307458', '等待业主对施工测量控制网设计报告的批发，按照批复后的设计报告执行。', 20, '2020-10-20', '同意开展工作。做好与成勘院项目部、双江航电业主汇报联系。', 10, '2020-10-21', NULL, NULL, '2020-11-01');
INSERT INTO `cmc_project_comment` VALUES ('1648881417837084674', '按相应规程规范、技术部和成勘院项目部的要求作业。', 20, '2020-10-19', '同意开展工作。', 10, '2020-10-20', NULL, NULL, '2020-10-20');
INSERT INTO `cmc_project_comment` VALUES ('1648881417849667586', '同意，建议尽快签订合同', 15, '2020-10-15', '请项目负责人加强作业队伍的质量、安全、进度管理，做好与甲方的协调沟通。同意开展工作。', 10, '2020-10-16', '已确认。', NULL, '2020-10-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881417862250498', '开展工作前，请先与用户联系，到现场和业主方面通报一下，并现场落实完成时间。', 20, '2020-10-13', '同意开展工作。', 10, '2020-10-14', NULL, NULL, '2020-10-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881417874833410', '同意', 15, '2020-10-22', '同意开展工作。', 10, '2020-10-23', '已接受。', NULL, '2020-10-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881417887416322', '同意', 15, '2020-10-15', '同意开展工作。', 10, '2020-10-16', '同意', NULL, '2020-10-19');
INSERT INTO `cmc_project_comment` VALUES ('1648881417904193537', '同意此变更', 15, '2020-10-12', '同意开展工作。', 10, '2020-10-13', NULL, NULL, '2020-10-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881417925165058', '任务分散，注意安全。', 20, '2020-10-27', '同意开展工作。', 10, '2020-10-28', '已对项目参与人员进行各项交底工作，可以开展工作。', NULL, '2020-10-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881417954525186', '注意安全！', 20, '2020-09-29', '同意。请加强与甲方沟通和项目安全、质量、进度管理。', 10, '2020-09-30', '现场以对分包商进行安全交底，项目负责人须监督分包商安全措施到位。', NULL, '2020-10-05');
INSERT INTO `cmc_project_comment` VALUES ('1648881417971302402', '同意进场', 15, '2020-10-07', '落实安全生产措施，保证安全生产。工作量、工期、质量标准按照合同执行。', 10, '2020-10-07', NULL, NULL, '2020-10-10');
INSERT INTO `cmc_project_comment` VALUES ('1648881418034216962', '已签合同，同意开展工作', 15, '2020-09-24', '同意。加强与甲方沟通协调及项目安全、质量、进度管理。', 10, '2020-09-25', '已组织项目参与人员进行了安全、技术交底。', NULL, '2020-10-05');
INSERT INTO `cmc_project_comment` VALUES ('1648881418126491649', '满足项目部范围要求', 20, '2020-09-24', '同意。', 10, '2020-09-30', '已经交底', NULL, '2020-10-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881418139074562', '按用户要求，注意飞行安全，不能飞行的地方不要冒险去飞，做到安全第一。', 20, '2020-09-29', '同意', 10, '2020-09-29', '已提醒作业员安全生产', NULL, '2020-10-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881418155851778', '加强与用户的沟通与协调。', 20, '2020-09-14', '同意开展工作。', 10, '2021-01-06', '已进行安全、技术交底。', NULL, '2021-01-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881418172628994', '尽快与用户联系，明确范围和具体要求，保质保量地完成测绘任务。', 20, '2020-09-10', '加强进度、质量、安全监管。', 10, '2020-09-14', '已组织项目参与人员学习，严格规范作业。', NULL, '2020-09-14');
INSERT INTO `cmc_project_comment` VALUES ('1648881418185211906', '同意开展任务', 15, '2020-09-10', '落实安全生产措施，确保安全生产和产品质量。', 10, '2020-09-11', NULL, NULL, '2020-09-11');
INSERT INTO `cmc_project_comment` VALUES ('1648881418197794818', '根据用户明确的范围和要求，保质保量地完成任务。', 20, '2020-09-08', '同意。', 10, '2020-09-08', NULL, NULL, '2020-09-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881418214572034', '加强与用户的沟通与协调。', 20, '2020-08-31', '同意。', 10, '2020-08-31', '已确认。', NULL, '2020-08-31');
INSERT INTO `cmc_project_comment` VALUES ('1648881418227154945', '合同已经签订，同意开展工作', 15, '2020-08-21', '严格按要求开展工作，确保产品质量和安全生产。', 10, '2020-08-21', NULL, NULL, '2020-08-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881418239737858', '合同正在签订，同意先开展工作', 15, '2020-08-21', '同意', 10, '2020-08-21', '已确认。', NULL, '2020-08-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881418256515073', '加强与用户的沟通。', 20, '2020-08-13', '严格按照规范作业，注重产品质量，确保安全生产。', 10, '2020-08-14', NULL, NULL, '2020-08-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881418273292290', '同意', 15, '2020-08-05', '做好与甲方的协调沟通，确保安全生产，按质量、工期要求做好技术服务。', 10, '2020-08-06', NULL, NULL, '2020-08-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881418290069506', '加强与用户的沟通。', 20, '2020-07-22', '按《西藏自治区河湖管理范围划定工作实施方案（试行）》规定作业，保证产品质量符合要求。落实安全生产措施，确保安全生产。', 10, '2020-07-24', NULL, NULL, '2020-07-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881418302652417', '了解用户意图，尽快统计工作量给我。', 20, '2020-07-24', '同意', 10, '2020-07-24', NULL, NULL, '2020-07-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881418315235330', '同意', 15, '2020-07-15', '同意。按合同要求执行。落实安全生产措施，确保安全生产。', 10, '2020-07-15', NULL, NULL, '2020-07-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881418327818241', '现场用户指定范围，及时预估工作量报给我，谢谢。', 20, '2020-07-06', '同意', 10, '2020-07-07', NULL, NULL, '2020-07-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881418340401153', '加强与用户的沟通与协调。', 20, '2020-06-29', NULL, 7, '2020-06-29', NULL, NULL, '2020-06-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881418369761282', '同意', 15, '2020-06-23', '做好安全防控措施，确保安全生产。', 10, '2020-06-28', '已进行全体作业员安全、技术交底的学习。', NULL, '2020-06-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881418386538498', '按用户要求提交成果，并及时统计工作量，以便做预算使用。', 20, '2020-06-17', '同意。', 10, '2020-06-17', NULL, NULL, '2020-06-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881418399121410', '根据用户要求开展测量工作', 20, '2020-06-22', '各项工作上交正式的成果报告资料。', 10, '2020-06-24', NULL, NULL, '2020-06-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881418411704322', '根据规程规范作业。', 20, '2020-06-17', '同意。', 10, '2020-06-17', '已进行安全、技术交底。严格按照规范作业。', NULL, '2020-06-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881418424287233', '多与用户沟通，理解用户意图。', 20, '2020-06-10', '同意。收集已有资料，做校核检查。', 10, '2020-06-10', NULL, NULL, '2020-06-10');
INSERT INTO `cmc_project_comment` VALUES ('1648881418441064449', '多与用户沟通', 20, '2020-06-08', '同意。', 10, '2020-06-08', NULL, NULL, '2020-06-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881418453647362', '加强与用户的沟通，尽量满足用户需求。', 20, '2020-06-08', '同意', 10, '2020-06-08', NULL, NULL, '2020-06-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881418466230273', '尽快报预计工作量，给项目部做预算使用。', 20, '2020-06-04', '同意', 10, '2020-06-08', '按照业主给定范围完成生产工作。', NULL, '2020-06-03');
INSERT INTO `cmc_project_comment` VALUES ('1648881418483007490', '多与用户沟通', 20, '2020-06-04', '严格遵守安全生产法律法规及老挝国家法规，保证安全作业。', 10, '2020-06-08', NULL, NULL, '2020-06-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881418495590402', '满足用户要求', 20, '2020-05-26', '同意。', 10, '2020-05-26', '按照要求完成生产', NULL, '2020-05-22');
INSERT INTO `cmc_project_comment` VALUES ('1648881418508173314', '满足用户需求', 20, '2020-05-22', '同意', 10, '2020-05-26', NULL, NULL, '2020-05-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881418524950530', '加强与用户的沟通，理解用户意图。', 20, '2020-05-21', '同意', 10, '2020-05-26', '按照公司要求，多加交流沟通', NULL, '2020-05-28');
INSERT INTO `cmc_project_comment` VALUES ('1648881418541727745', '尽量满足用户要求。', 20, '2020-05-20', '同意。', 10, '2020-05-20', NULL, NULL, '2020-05-21');
INSERT INTO `cmc_project_comment` VALUES ('1648881418558504961', '同意', 15, '2020-05-15', '做好安全风险因素管控，确保安全生产；严格执行技术规程，保证产品质量。', 10, '2020-05-17', NULL, NULL, '2020-05-18');
INSERT INTO `cmc_project_comment` VALUES ('1648881418575282177', '加强现场沟通。', 20, '2020-05-12', '严禁水上作业，保证安全生产。', 10, '2020-05-13', NULL, NULL, '2020-05-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881418592059394', '与用户多沟通和协调。', 20, '2020-05-08', '禁止水上作业。断面测量如不具备安全作业条件，工作暂缓。本项目内业、飞行负责人：李仁贵；外业控制测量、调绘补测等现场负责人：程昊。', 10, '2020-05-08', NULL, NULL, '2020-05-08');
INSERT INTO `cmc_project_comment` VALUES ('1648881418608836610', '加强与用户的沟通与协调。', 20, '2020-05-07', '加强高原作业安全防护及资料成果保密。', 10, '2020-05-07', NULL, NULL, '2020-05-07');
INSERT INTO `cmc_project_comment` VALUES ('1648881418625613825', '同意', 15, '2020-04-30', '同意。', 10, '2020-04-30', NULL, NULL, '2020-04-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881418642391041', '同意', 15, '2020-04-23', '同意。\r\n按甲方要求的产品质量、工期提交成果。注意控制点埋设质量、地形图调绘及图面合理性。', 10, '2020-04-23', NULL, NULL, '2020-05-06');
INSERT INTO `cmc_project_comment` VALUES ('1648881418663362562', '同意', 15, '2020-04-22', '与甲方做好沟通协调。确保安全生产。测量产品质量符合规范要求。', 10, '2020-04-23', NULL, NULL, '2020-04-24');
INSERT INTO `cmc_project_comment` VALUES ('1648881418680139778', '根据业主要求转换。', 20, '2020-04-27', '同意', 10, '2020-04-28', NULL, NULL, '2020-04-29');
INSERT INTO `cmc_project_comment` VALUES ('1648881418696916993', '多与用户沟通和协调。', 20, '2020-03-26', '确保安全生产。新测地形图应与已有地形图接边，重合部分检查符合情况。', 10, '2020-03-30', NULL, NULL, '2020-03-30');
INSERT INTO `cmc_project_comment` VALUES ('1648881418713694209', '与用户多沟通与协调', 20, '2020-03-18', '同意', 10, '2020-03-18', NULL, NULL, '2020-03-17');
INSERT INTO `cmc_project_comment` VALUES ('1648881418730471425', '同意，注意项目要求', 15, '2020-03-13', '按合同要求执行，确保安全生产，保证产品质量。', 10, '2020-03-13', NULL, NULL, '2020-03-16');
INSERT INTO `cmc_project_comment` VALUES ('1648881418747248642', '同意', 15, '2020-03-13', '同意', 10, '2020-03-16', NULL, NULL, '2020-03-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881418764025857', '加强与用户沟通。', 20, '2020-03-09', '水下地形测绘必须制定、落实专项安全生产措施，在确保安全生产前提下开展现场作业。加强外业调绘、补测及地形图实地对图、测点检查工作，保证产品质量满足要求。', 10, '2020-03-09', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881418776608769', '现场与用户多沟通协调。', 20, '2020-03-06', '做好新冠肺炎疫情防控，确保安全生产。', 10, '2020-03-11', NULL, NULL, '2020-03-13');
INSERT INTO `cmc_project_comment` VALUES ('1648881418793385986', '加强与用户的沟通。', 20, '2020-03-06', '同意。', 10, '2020-03-09', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881418810163201', '按技术部要求执行。', 20, '2020-03-04', '同意。', 10, '2020-03-04', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881418822746114', '同意', 15, '2020-03-02', NULL, 10, '2020-03-02', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881418835329026', '加强与用户和业主的沟通与协调。', 20, '2020-02-28', NULL, 10, '2020-03-02', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881418852106241', '加强与用户沟通。', 20, '2020-02-28', NULL, 10, '2020-03-02', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881418864689154', '同意', 15, '2020-03-02', '做好技术、实施方案策划编制，保证项目工期、产品质量符合合同要求。制定落实安全生产、新冠肺炎疫情防控措施，确保安全生产。', 10, '2020-03-04', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881418881466369', '同意', 15, '2020-02-25', '做好作业技术方案策划编制，保证项目工期、产品质量满足合同要求。制定落实安全生产、新冠肺炎疫情防控措施，确保安全生产。\r\n本项目内部总体委托费用为1080000.00元（大写：壹佰零捌万元整），除公司派出车辆产生的通行费、燃油以外，项目不再报销其他费用。项目委托费用，按本项目收款进度支付。', 10, '2020-03-09', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881418894049281', '保持与用户的沟通顺畅。', 20, '2020-02-26', '测区位于高海拔、边远地区，制定、落实安全生产管理措施，确保安全生产。根据测区已有控制点、测区交通、植被等情况优化技术设计，按实际需要调整工作量。', 10, '2020-02-27', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881418910826498', '保持与用户的沟通顺畅。', 20, '2020-02-26', '测区位于高海拔、边远地区，制定、落实安全生产管理措施，确保安全生产。根据测区已有控制点、测区交通、植被等情况优化技术设计，按实际需要调整工作量。', 10, '2020-02-27', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881418923409409', '经常保持与用户的沟通。', 20, '2020-02-26', '制定、落实安全生产措施，确保安全生产。与甲方做好项目工期、工作量、地方协调等沟通。根据测区已有控制、交通植被情况等优化技术方案，按实际需要调整工作内容与工作量。', 10, '2020-02-27', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881418940186626', '拟同意', 15, '2021-02-22', '同意开展工作。', 10, '2021-02-22', NULL, NULL, '2021-03-04');
INSERT INTO `cmc_project_comment` VALUES ('1648881418952769538', '同意', 15, '2020-01-06', NULL, 10, '2020-01-07', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881418965352449', NULL, 20, '2020-01-06', NULL, 10, '2020-01-07', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881418977935362', '同意', 15, '2020-01-07', NULL, 10, '2020-01-07', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881418994712578', '按合同要求执行', 20, '2020-01-06', NULL, 10, '2020-01-07', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419011489794', '按合同要求执行', 20, '2020-01-06', NULL, 10, '2020-01-07', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419028267010', '同意', 15, '2020-01-02', NULL, 10, '2020-01-02', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419045044225', '同意', 15, '2019-12-27', NULL, 10, '2020-01-02', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419057627138', '同意', 15, '2019-12-30', '在确保安全的前提下开展工作。', 10, '2019-12-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419070210050', '现场请与用户多沟通协调', 20, '2019-12-24', NULL, 10, '2019-12-24', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419086987266', '现场请与用户多沟通协调', 20, '2019-12-24', NULL, 10, '2019-12-24', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419099570177', '同意', 15, '2019-12-16', NULL, 10, '2019-12-16', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419112153089', '同意', 15, '2019-12-18', NULL, 10, '2019-12-22', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419128930305', '项目新增2块1:2000 DOM制作，面积3.5km²。', 20, '2019-12-04', '冬季高海拔地区作业，注意交通安全，预防高原反应及冻伤，确保安全生产。', 10, '2019-12-04', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419145707521', '同意', 15, '2019-12-03', NULL, 10, '2019-12-06', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419162484738', NULL, 15, '2019-12-03', '冬季高海拔地区作业，保证安全前提下开展生产作业。', 10, '2019-12-03', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419179261954', '有问题及时与用户沟通!', 20, '2019-12-03', '测图范围按甲方提供的范围图及任务书要求执行。', 10, '2019-12-03', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419191844866', NULL, 20, '2019-12-03', NULL, 10, '2019-12-03', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419208622081', NULL, 15, '2019-11-26', NULL, 10, '2019-11-26', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419221204993', '按技术部要求执行', 20, '2019-12-23', NULL, 10, '2019-12-23', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419237982210', NULL, 15, '2019-11-15', NULL, 10, '2019-11-19', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419254759426', NULL, 15, '2019-11-15', NULL, 10, '2019-11-19', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419271536642', '进退场时，请与用户联系人沟通！', 20, '2019-11-18', NULL, 10, '2019-11-19', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419284119553', '同意', 15, '2020-03-02', '同意', 10, '2020-04-15', NULL, NULL, '2020-04-15');
INSERT INTO `cmc_project_comment` VALUES ('1648881419296702466', '进退场时，请与用户联系人沟通！', 20, '2019-11-18', NULL, 10, '2019-11-19', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419313479682', '请与项目经理联系，做好与业主的沟通和协调，并保质保量地完成任务。', 20, '2019-11-05', NULL, 10, '2019-11-05', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419330256897', '认真落实项目部用图要求和意图。', 20, '2019-11-05', NULL, 10, '2019-11-05', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419347034113', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419363811330', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419376394242', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419388977153', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419405754369', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419422531586', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419439308802', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419451891714', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419468668930', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419481251841', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419498029057', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419514806274', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419531583489', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419548360705', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419565137921', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419581915137', NULL, NULL, NULL, NULL, 10, '2019-11-04', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419594498049', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419607080962', '同意', 15, '2020-01-13', NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419619663874', '同意', 15, '2020-01-13', NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419632246785', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419649024001', NULL, 20, '2020-01-09', NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419665801218', '根据用户要求，保质保量地完成，让用户满意！', 20, '2019-10-30', NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419682578433', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419703549953', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419741298689', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419774853121', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419812601858', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419846156290', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419883905026', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419917459457', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419955208193', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881419988762625', NULL, NULL, NULL, NULL, 10, '2019-11-04', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420043288578', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420081037314', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420118786049', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420152340482', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420173312002', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420194283521', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420211060738', NULL, NULL, NULL, NULL, 10, '2019-11-04', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420227837954', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420240420865', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420257198082', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420269780994', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420290752514', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420315918338', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420336889857', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420374638594', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420412387330', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420445941761', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420479496193', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420513050625', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420550799361', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420584353793', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420617908225', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420651462658', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420685017090', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420718571521', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420756320257', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420794068994', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420827623425', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420861177858', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420903120898', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420936675329', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881420970229761', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421003784193', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421041532929', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421075087361', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421108641794', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421142196225', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421175750658', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421209305089', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421242859521', NULL, NULL, NULL, NULL, 10, '2019-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421276413954', NULL, NULL, NULL, NULL, 10, '2019-10-30', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421301579777', '同意', 20, '2019-10-25', NULL, 10, '2019-10-25', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421318356994', NULL, NULL, NULL, NULL, 10, '2019-10-26', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421335134209', '同意', 20, '2019-10-25', NULL, 10, '2019-10-26', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421351911426', '周全和用户现场沟通，土地复垦区1:1000地形图测绘比例尺更改为1:500。', 20, '2019-10-21', NULL, 10, '2019-10-26', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421368688642', NULL, 22, '2019-10-16', NULL, 10, '2019-10-26', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421385465858', NULL, 22, '2019-10-10', NULL, 10, '2019-10-25', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421402243074', NULL, 23, '2019-10-08', NULL, 10, '2019-10-25', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421414825986', NULL, NULL, NULL, NULL, 10, '2019-10-13', NULL, NULL, NULL);
INSERT INTO `cmc_project_comment` VALUES ('1648881421427408898', NULL, 7, '2021-01-15', NULL, 7, '2021-01-18', NULL, NULL, '2021-09-27');
INSERT INTO `cmc_project_comment` VALUES ('1648881421444186113', '拟同意', 15, '2021-01-08', '同意开展工作。', 10, '2021-01-08', NULL, NULL, '2021-02-25');
INSERT INTO `cmc_project_comment` VALUES ('1648881421460963330', '拟同意', 15, '2021-01-08', '同意开展工作。', 10, '2021-02-22', NULL, NULL, '2021-03-04');

-- ----------------------------
-- 45、cmc项目进度表
-- ----------------------------
drop table if exists `cmc_project_progress`;
create table `cmc_project_progress`  (
  `progress_id` 	bigint not null  auto_increment comment '项目进度id',
  `project_id` 		char(19)		default null comment '项目id',
  `percentage` 		varchar(5)		default null comment '累计进度',
  `date` 			datetime		default null comment '截至日期',
  `situation` 		varchar(255)	default null comment '情况说明',
  primary key (`progress_id`)
) engine = innodb comment = 'cmc项目进度表';

-- ----------------------------
-- 初始化-项目进度表数据
-- ----------------------------
INSERT INTO `cmc_project_progress` VALUES (1, '1648881421460963330', '100', '2019-12-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (2, '1648881421427408898', '100', '2019-12-31 00:00:00', '按合同要求完成各项工作，并向甲方办理了结算');
INSERT INTO `cmc_project_progress` VALUES (3, '1648881421414825986', '100', '2019-11-26 00:00:00', '资料已提交给甲方');
INSERT INTO `cmc_project_progress` VALUES (4, '1648881421402243074', '10', '2019-10-22 00:00:00', '完成控制测量无人机摄影像控点测量调绘检查点水下测量');
INSERT INTO `cmc_project_progress` VALUES (5, '1648881421402243074', '50', '2019-10-29 00:00:00', '完成地形图解析测量 DOMDEM制作');
INSERT INTO `cmc_project_progress` VALUES (6, '1648881421402243074', '70', '2019-11-15 00:00:00', '完成划定报告，通过专家评审，等待测设界桩进场通知');
INSERT INTO `cmc_project_progress` VALUES (7, '1648881421402243074', '95', '2020-08-26 00:00:00', '成果验收');
INSERT INTO `cmc_project_progress` VALUES (8, '1648881421402243074', '100', '2021-01-26 00:00:00', '公司内部归档');
INSERT INTO `cmc_project_progress` VALUES (9, '1648881421385465858', '40', '2019-10-25 00:00:00', '第一次外业数据采集完成');
INSERT INTO `cmc_project_progress` VALUES (10, '1648881421385465858', '50', '2019-10-31 00:00:00', '完成一次检测并提交报告');
INSERT INTO `cmc_project_progress` VALUES (11, '1648881421385465858', '80', '2020-09-29 00:00:00', '完成第二次监测外业工作');
INSERT INTO `cmc_project_progress` VALUES (12, '1648881421385465858', '100', '2020-10-11 00:00:00', '完成二次监测报告提交');
INSERT INTO `cmc_project_progress` VALUES (13, '1648881421368688642', '10', '2019-10-14 00:00:00', '准备、进场');
INSERT INTO `cmc_project_progress` VALUES (14, '1648881421368688642', '100', '2019-10-18 00:00:00', '现场找点、联测、资料改算，转换关系计算、图形转换');
INSERT INTO `cmc_project_progress` VALUES (15, '1648881421351911426', '100', '2019-11-13 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (16, '1648881421335134209', '20', '2019-10-25 00:00:00', '完成预测像控点测量，已知控制点寻找及CGCS200坐标测量');
INSERT INTO `cmc_project_progress` VALUES (17, '1648881421335134209', '30', '2019-10-26 00:00:00', '业主提及的特殊区域像控点加密及检查点测量，及新增控制点的埋设');
INSERT INTO `cmc_project_progress` VALUES (18, '1648881421335134209', '50', '2019-10-30 00:00:00', '无人机飞行完成，外业调图与内页测图预计同步开始');
INSERT INTO `cmc_project_progress` VALUES (19, '1648881421335134209', '70', '2019-11-03 00:00:00', '外业调图完成');
INSERT INTO `cmc_project_progress` VALUES (20, '1648881421335134209', '90', '2019-11-04 00:00:00', '内页测图工作完成后，经检查后交予业主作资用图使用，同时外业人员返回成都');
INSERT INTO `cmc_project_progress` VALUES (21, '1648881421335134209', '100', '2019-11-10 00:00:00', '外业资料交付于航测遥感中心，开始地类地形图数字化');
INSERT INTO `cmc_project_progress` VALUES (22, '1648881421318356994', '100', '2019-10-28 00:00:00', '已完成');
INSERT INTO `cmc_project_progress` VALUES (23, '1648881421301579777', '100', NULL, NULL);
INSERT INTO `cmc_project_progress` VALUES (24, '1648881421276413954', '50', '2019-10-31 00:00:00', '1:2000地形图测量外业完成');
INSERT INTO `cmc_project_progress` VALUES (25, '1648881421276413954', '50', '2020-04-02 00:00:00', '地形图测量完成');
INSERT INTO `cmc_project_progress` VALUES (26, '1648881421276413954', '100', '2021-10-30 00:00:00', '资料已归档');
INSERT INTO `cmc_project_progress` VALUES (27, '1648881421242859521', '80', '2019-09-27 00:00:00', '完成外业工作');
INSERT INTO `cmc_project_progress` VALUES (28, '1648881421242859521', '100', '2019-09-30 00:00:00', '提交资料');
INSERT INTO `cmc_project_progress` VALUES (29, '1648881421209305089', '100', '2019-09-25 00:00:00', '全部提交');
INSERT INTO `cmc_project_progress` VALUES (30, '1648881421175750658', '50', '2019-10-15 00:00:00', '项目变更，提交提起资料');
INSERT INTO `cmc_project_progress` VALUES (31, '1648881421175750658', '100', '2019-10-18 00:00:00', '提交全部正式资料');
INSERT INTO `cmc_project_progress` VALUES (32, '1648881421142196225', '100', '2019-08-25 00:00:00', '枢纽区左岸地形图测绘1:2000');
INSERT INTO `cmc_project_progress` VALUES (33, '1648881421142196225', '100', '2019-08-25 00:00:00', '枢纽区右岸地形图测绘1:2000');
INSERT INTO `cmc_project_progress` VALUES (34, '1648881421108641794', '100', '2019-12-22 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (35, '1648881421075087361', '100', '2019-12-07 00:00:00', '因成勘院移民未协调好，项目未实施');
INSERT INTO `cmc_project_progress` VALUES (36, '1648881421041532929', '100', NULL, NULL);
INSERT INTO `cmc_project_progress` VALUES (37, '1648881421003784193', '50', '2019-07-31 00:00:00', '完成外业工作');
INSERT INTO `cmc_project_progress` VALUES (38, '1648881421003784193', '100', '2019-11-20 00:00:00', '提交资料');
INSERT INTO `cmc_project_progress` VALUES (39, '1648881420970229761', '30', '2019-07-17 00:00:00', '完成实地控制点联测');
INSERT INTO `cmc_project_progress` VALUES (40, '1648881420970229761', '100', '2019-07-20 00:00:00', '完成坐标及地形图转换');
INSERT INTO `cmc_project_progress` VALUES (41, '1648881420936675329', '100', '2019-07-24 00:00:00', '作业人员返回成都');
INSERT INTO `cmc_project_progress` VALUES (42, '1648881420903120898', '70', '2020-08-20 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (43, '1648881420903120898', '90', '2021-09-15 00:00:00', '内业完成');
INSERT INTO `cmc_project_progress` VALUES (44, '1648881420903120898', '100', '2021-09-30 00:00:00', '资料归档');
INSERT INTO `cmc_project_progress` VALUES (45, '1648881420861177858', '100', '2019-12-22 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (46, '1648881420827623425', '100', '2019-05-09 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (47, '1648881420794068994', '100', '2019-11-26 00:00:00', '资料已提交归档');
INSERT INTO `cmc_project_progress` VALUES (48, '1648881420756320257', '100', '2019-05-05 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (49, '1648881420718571521', '90', '2020-07-20 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (50, '1648881420685017090', '100', '2019-04-24 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (51, '1648881420617908225', '100', '2019-10-19 00:00:00', '完成现场工作，并提交相应成果');
INSERT INTO `cmc_project_progress` VALUES (52, '1648881420584353793', '90', '2019-03-23 00:00:00', '已提交成果');
INSERT INTO `cmc_project_progress` VALUES (53, '1648881420584353793', '100', '2019-11-26 00:00:00', '因前期提交成果说后期要改动故暂时未归档，现已公司归档，');
INSERT INTO `cmc_project_progress` VALUES (54, '1648881420550799361', '100', '2020-03-08 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (55, '1648881420513050625', '100', NULL, NULL);
INSERT INTO `cmc_project_progress` VALUES (56, '1648881420479496193', '100', '2019-02-18 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (57, '1648881420445941761', '100', '2019-12-07 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (58, '1648881420412387330', '100', '2019-01-15 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (59, '1648881420336889857', '100', '2019-11-26 00:00:00', '资料已提交归档');
INSERT INTO `cmc_project_progress` VALUES (60, '1648881420315918338', '100', '2019-11-24 00:00:00', '资料已提交归档');
INSERT INTO `cmc_project_progress` VALUES (61, '1648881420290752514', '100', '2019-01-21 00:00:00', '通过技术质量部检查归档');
INSERT INTO `cmc_project_progress` VALUES (62, '1648881420269780994', '100', '2019-08-19 00:00:00', '利用已有激光成图');
INSERT INTO `cmc_project_progress` VALUES (63, '1648881420257198082', '100', NULL, NULL);
INSERT INTO `cmc_project_progress` VALUES (64, '1648881420240420865', '100', '2019-10-19 00:00:00', '外业结束，现场提交资料');
INSERT INTO `cmc_project_progress` VALUES (65, '1648881420227837954', '30', '2019-07-11 00:00:00', '按照合同约定收款25%');
INSERT INTO `cmc_project_progress` VALUES (66, '1648881420227837954', '50', '2020-01-21 00:00:00', '按照合同约定收款49%');
INSERT INTO `cmc_project_progress` VALUES (67, '1648881420227837954', '60', '2020-03-31 00:00:00', '按照合同约定收款59%');
INSERT INTO `cmc_project_progress` VALUES (68, '1648881420227837954', '80', '2021-02-08 00:00:00', '按照合同约定收款78%');
INSERT INTO `cmc_project_progress` VALUES (69, '1648881420227837954', '80', '2021-03-09 00:00:00', '按照合同约定退履约保证金5%');
INSERT INTO `cmc_project_progress` VALUES (70, '1648881420227837954', '100', '2022-03-10 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (71, '1648881420211060738', '100', '2019-12-01 00:00:00', '外调结束');
INSERT INTO `cmc_project_progress` VALUES (72, '1648881420194283521', '100', '2019-01-31 00:00:00', '资料已提交归档');
INSERT INTO `cmc_project_progress` VALUES (73, '1648881420173312002', '100', '2019-10-01 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (74, '1648881420152340482', '100', '2019-05-27 00:00:00', '完成');
INSERT INTO `cmc_project_progress` VALUES (75, '1648881420118786049', '100', NULL, NULL);
INSERT INTO `cmc_project_progress` VALUES (76, '1648881420081037314', '100', '2019-05-05 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (77, '1648881419988762625', '100', '2019-05-20 00:00:00', '配合已完成，工作量已签证');
INSERT INTO `cmc_project_progress` VALUES (78, '1648881419955208193', '100', '2019-04-10 00:00:00', '资料已提交归档');
INSERT INTO `cmc_project_progress` VALUES (79, '1648881419917459457', '100', '2019-12-22 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (80, '1648881419883905026', '100', NULL, NULL);
INSERT INTO `cmc_project_progress` VALUES (81, '1648881419846156290', '70', '2019-08-13 00:00:00', '完成外业数据采集工作');
INSERT INTO `cmc_project_progress` VALUES (82, '1648881419846156290', '100', '2019-08-20 00:00:00', '提交正式资料');
INSERT INTO `cmc_project_progress` VALUES (83, '1648881419741298689', '100', '2019-12-22 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (84, '1648881419703549953', '100', NULL, NULL);
INSERT INTO `cmc_project_progress` VALUES (85, '1648881419665801218', '50', '2019-11-21 00:00:00', '完成枢纽区修测及施工临时营地实测工作');
INSERT INTO `cmc_project_progress` VALUES (86, '1648881419665801218', '80', '2019-11-25 00:00:00', '完成八窝龙供水站及表土堆放场的航飞及地面工作');
INSERT INTO `cmc_project_progress` VALUES (87, '1648881419665801218', '100', '2019-12-05 00:00:00', '提交正式成果');
INSERT INTO `cmc_project_progress` VALUES (88, '1648881419649024001', '100', '2019-12-28 00:00:00', '完成外业工作');
INSERT INTO `cmc_project_progress` VALUES (89, '1648881419632246785', '100', '2019-10-09 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (90, '1648881419594498049', '100', '2019-09-30 00:00:00', '全部完成，资料已提交甲方');
INSERT INTO `cmc_project_progress` VALUES (91, '1648881419581915137', '100', '2019-07-31 00:00:00', '7月31日向业主方：雅砻江公司两河口建设管理局提交了三维模型和工程量计算成果');
INSERT INTO `cmc_project_progress` VALUES (92, '1648881419565137921', '100', '2019-06-17 00:00:00', '地形图测绘1:2000');
INSERT INTO `cmc_project_progress` VALUES (93, '1648881419548360705', '90', '2019-11-26 00:00:00', '雅砻江两段断面还未完成');
INSERT INTO `cmc_project_progress` VALUES (94, '1648881419548360705', '100', '2019-11-26 00:00:00', '金沙江、雅砻江地形图测绘');
INSERT INTO `cmc_project_progress` VALUES (95, '1648881419531583489', '100', '2019-04-22 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (96, '1648881419514806274', '100', '2019-06-06 00:00:00', '地形图测绘1:500');
INSERT INTO `cmc_project_progress` VALUES (97, '1648881419498029057', '100', '2019-06-11 00:00:00', '抚琴街道、荷花池街道均完成提交');
INSERT INTO `cmc_project_progress` VALUES (98, '1648881419481251841', '100', '2019-04-10 00:00:00', '地形图测绘1:500');
INSERT INTO `cmc_project_progress` VALUES (99, '1648881419481251841', '100', '2019-04-25 00:00:00', '地形图测绘1:2000');
INSERT INTO `cmc_project_progress` VALUES (100, '1648881419468668930', '100', '2019-05-27 00:00:00', '完成');
INSERT INTO `cmc_project_progress` VALUES (101, '1648881419451891714', '90', '2019-04-23 00:00:00', '通过公司技术质量部检查');
INSERT INTO `cmc_project_progress` VALUES (102, '1648881419451891714', '100', '2019-04-25 00:00:00', '甲方召开验收会，通过甲方验收');
INSERT INTO `cmc_project_progress` VALUES (103, '1648881419439308802', '100', '2019-12-22 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (104, '1648881419422531586', '100', NULL, NULL);
INSERT INTO `cmc_project_progress` VALUES (105, '1648881419405754369', '40', '2019-11-18 00:00:00', '按照合同约定收款36%');
INSERT INTO `cmc_project_progress` VALUES (106, '1648881419405754369', '40', '2020-04-03 00:00:00', '按照合同约定收款40%');
INSERT INTO `cmc_project_progress` VALUES (107, '1648881419405754369', '50', '2020-05-07 00:00:00', '按照合同约定收款48%');
INSERT INTO `cmc_project_progress` VALUES (108, '1648881419405754369', '50', '2020-07-27 00:00:00', '按照合同约定收款53%');
INSERT INTO `cmc_project_progress` VALUES (109, '1648881419405754369', '60', '2020-08-28 00:00:00', '按照合同约定收款57%');
INSERT INTO `cmc_project_progress` VALUES (110, '1648881419405754369', '60', '2020-10-26 00:00:00', '按照合同约定收款61%');
INSERT INTO `cmc_project_progress` VALUES (111, '1648881419388977153', '70', '2021-04-22 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (112, '1648881419388977153', '90', '2021-05-19 00:00:00', '内页完成');
INSERT INTO `cmc_project_progress` VALUES (113, '1648881419388977153', '100', '2021-05-20 00:00:00', '资料归档');
INSERT INTO `cmc_project_progress` VALUES (114, '1648881419376394242', '70', '2019-12-22 00:00:00', '完成外业工作、内业工作基本完成，等待成都市级验收。');
INSERT INTO `cmc_project_progress` VALUES (115, '1648881419376394242', '100', '2021-09-30 00:00:00', '完成郫都区自行组织的项目验收工作，将成果资料交付了甲方。');
INSERT INTO `cmc_project_progress` VALUES (116, '1648881419363811330', '100', '2019-03-02 00:00:00', '提交最终成果');
INSERT INTO `cmc_project_progress` VALUES (117, '1648881419330256897', '100', '2019-11-04 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (118, '1648881419313479682', '90', '2019-11-08 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (119, '1648881419313479682', '100', '2020-03-02 00:00:00', '资料提交完成');
INSERT INTO `cmc_project_progress` VALUES (120, '1648881419296702466', '100', '2019-11-26 00:00:00', '资料已提交归档');
INSERT INTO `cmc_project_progress` VALUES (121, '1648881419284119553', '100', '2019-12-31 00:00:00', '按合同要求一完成年度生产任务');
INSERT INTO `cmc_project_progress` VALUES (122, '1648881419271536642', '100', '2019-12-02 00:00:00', '资料上交甲方，技术部正在检查资料');
INSERT INTO `cmc_project_progress` VALUES (123, '1648881419254759426', '10', '2019-11-23 00:00:00', '准备进场资料，等待业主通知进场时间');
INSERT INTO `cmc_project_progress` VALUES (124, '1648881419254759426', '80', '2020-01-14 00:00:00', '外业完成，整理资料');
INSERT INTO `cmc_project_progress` VALUES (125, '1648881419254759426', '100', '2020-02-10 00:00:00', '已提交资料');
INSERT INTO `cmc_project_progress` VALUES (126, '1648881419237982210', '100', '2019-11-26 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (127, '1648881419221204993', '80', '2019-11-30 00:00:00', '外业数据采集工作结束');
INSERT INTO `cmc_project_progress` VALUES (128, '1648881419221204993', '100', '2019-12-06 00:00:00', '提交资料');
INSERT INTO `cmc_project_progress` VALUES (129, '1648881419208622081', '100', '2019-12-04 00:00:00', '控制及断面基点完成');
INSERT INTO `cmc_project_progress` VALUES (130, '1648881419208622081', '100', '2019-12-10 00:00:00', '1：1000地形图测绘完成');
INSERT INTO `cmc_project_progress` VALUES (131, '1648881419208622081', '100', '2019-12-10 00:00:00', '1：1000水下地形图测绘完成');
INSERT INTO `cmc_project_progress` VALUES (132, '1648881419208622081', '100', '2019-12-10 00:00:00', '1：1000河道横断面测量完成');
INSERT INTO `cmc_project_progress` VALUES (133, '1648881419208622081', '100', '2019-12-04 00:00:00', '渠道（底顶高及宽度）测量已完成');
INSERT INTO `cmc_project_progress` VALUES (134, '1648881419208622081', '100', '2019-12-04 00:00:00', '下游桥下堰（堰顶高及宽度）测量已完成');
INSERT INTO `cmc_project_progress` VALUES (135, '1648881419208622081', '100', '2019-12-10 00:00:00', '地形图测绘（内业）1:1000已经完成');
INSERT INTO `cmc_project_progress` VALUES (136, '1648881419208622081', '100', '2019-12-10 00:00:00', '地形图测绘（内业水下）地形图测绘（内业水下）已经完成');
INSERT INTO `cmc_project_progress` VALUES (137, '1648881419191844866', '30', '2019-12-01 00:00:00', '完成像控点的预设及无人机飞行，并对遮挡严重的公路进行实测');
INSERT INTO `cmc_project_progress` VALUES (138, '1648881419191844866', '60', '2019-12-02 00:00:00', '完成外业调绘作业');
INSERT INTO `cmc_project_progress` VALUES (139, '1648881419191844866', '80', '2019-12-03 00:00:00', '对联测点进行寻找采集，图根点的布设，同时内页测图工作开始开展，外业作业人员于当晚返回成都');
INSERT INTO `cmc_project_progress` VALUES (140, '1648881419191844866', '100', '2019-12-10 00:00:00', '已向业主提交正式图');
INSERT INTO `cmc_project_progress` VALUES (141, '1648881419179261954', '20', '2019-12-10 00:00:00', '完成横断面及水边线数据采集');
INSERT INTO `cmc_project_progress` VALUES (142, '1648881419179261954', '80', '2019-12-17 00:00:00', '完成航飞及其他外业工作');
INSERT INTO `cmc_project_progress` VALUES (143, '1648881419179261954', '100', '2019-12-27 00:00:00', '完成资料整编并提交');
INSERT INTO `cmc_project_progress` VALUES (144, '1648881419162484738', '10', '2019-12-04 00:00:00', '进场');
INSERT INTO `cmc_project_progress` VALUES (145, '1648881419162484738', '40', '2019-12-08 00:00:00', '完成波罗水电站高程点测量');
INSERT INTO `cmc_project_progress` VALUES (146, '1648881419162484738', '100', '2019-12-17 00:00:00', '资用地形图提交；三维模型制作中，测绘报告编写中。');
INSERT INTO `cmc_project_progress` VALUES (147, '1648881419145707521', '40', '2019-12-06 00:00:00', '完成相控点测量及二区的正摄和倾斜');
INSERT INTO `cmc_project_progress` VALUES (148, '1648881419145707521', '80', '2019-12-07 00:00:00', '完成检查点、图根点测量，完成所有飞行计划');
INSERT INTO `cmc_project_progress` VALUES (149, '1648881419145707521', '100', '2019-12-24 00:00:00', '完成资料提交');
INSERT INTO `cmc_project_progress` VALUES (150, '1648881419128930305', '60', '2019-12-10 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (151, '1648881419128930305', '90', '2019-12-16 00:00:00', '内业图件完成');
INSERT INTO `cmc_project_progress` VALUES (152, '1648881419128930305', '100', '2019-12-17 00:00:00', '成果已提交业主，报告待完善');
INSERT INTO `cmc_project_progress` VALUES (153, '1648881419128930305', '100', '2020-02-27 00:00:00', '报告提交');
INSERT INTO `cmc_project_progress` VALUES (154, '1648881419112153089', '20', '2019-12-14 00:00:00', '完成像控点采集');
INSERT INTO `cmc_project_progress` VALUES (155, '1648881419112153089', '50', '2019-12-16 00:00:00', '现场地物变化较大，调图同时补测道路和房屋');
INSERT INTO `cmc_project_progress` VALUES (156, '1648881419112153089', '80', '2019-12-19 00:00:00', '完成外业调绘和补测');
INSERT INTO `cmc_project_progress` VALUES (157, '1648881419112153089', '90', '2019-12-21 00:00:00', '完成外业调绘上图，交付内业部门，编写贯标资料');
INSERT INTO `cmc_project_progress` VALUES (158, '1648881419112153089', '100', '2020-01-15 00:00:00', '资料归档，项目完成');
INSERT INTO `cmc_project_progress` VALUES (159, '1648881419099570177', '30', '2019-12-20 00:00:00', '静态观测外业完成');
INSERT INTO `cmc_project_progress` VALUES (160, '1648881419099570177', '90', '2019-12-29 00:00:00', '外业全部完成');
INSERT INTO `cmc_project_progress` VALUES (161, '1648881419099570177', '100', '2020-01-03 00:00:00', '数据成果交业主');
INSERT INTO `cmc_project_progress` VALUES (162, '1648881419086987266', '30', '2019-12-24 00:00:00', '完成无人机飞行');
INSERT INTO `cmc_project_progress` VALUES (163, '1648881419086987266', '70', '2019-12-29 00:00:00', '完成水下地形测绘、完成控制测量；外业返回成都。');
INSERT INTO `cmc_project_progress` VALUES (164, '1648881419086987266', '100', '2020-01-06 00:00:00', '资料已提交甲方。');
INSERT INTO `cmc_project_progress` VALUES (165, '1648881419070210050', '20', '2019-12-24 00:00:00', '进场，像控点测量中');
INSERT INTO `cmc_project_progress` VALUES (166, '1648881419070210050', '70', '2019-12-29 00:00:00', '完成无人机飞行、完成控制测量；外业返回成都。');
INSERT INTO `cmc_project_progress` VALUES (167, '1648881419070210050', '100', '2020-01-06 00:00:00', '资料提交甲方。');
INSERT INTO `cmc_project_progress` VALUES (168, '1648881419057627138', '90', '2020-01-15 00:00:00', '断面成果已提交至成勘院项目部');
INSERT INTO `cmc_project_progress` VALUES (169, '1648881419057627138', '100', '2020-03-06 00:00:00', '技术质量部已检查 全部资料已归档');
INSERT INTO `cmc_project_progress` VALUES (170, '1648881419045044225', '100', '2020-01-03 00:00:00', '成果已完成并移交，内部报告未完成。');
INSERT INTO `cmc_project_progress` VALUES (171, '1648881419045044225', '100', '2020-01-08 00:00:00', '报告提交');
INSERT INTO `cmc_project_progress` VALUES (172, '1648881419028267010', '20', '2020-01-03 00:00:00', '外业人员进场，并现场与业主查看测区情况，');
INSERT INTO `cmc_project_progress` VALUES (173, '1648881419028267010', '40', '2020-01-04 00:00:00', '航飞工作完成，调绘、像控点、检查点工作开始进行');
INSERT INTO `cmc_project_progress` VALUES (174, '1648881419028267010', '60', '2020-01-07 00:00:00', '图根点布设完成');
INSERT INTO `cmc_project_progress` VALUES (175, '1648881419028267010', '80', '2020-01-08 00:00:00', '外业工作完成，同时外业人员返回成都');
INSERT INTO `cmc_project_progress` VALUES (176, '1648881419028267010', '100', '2020-01-10 00:00:00', '资用资料已提交');
INSERT INTO `cmc_project_progress` VALUES (177, '1648881419011489794', '100', '2020-12-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (178, '1648881418994712578', '100', '2020-12-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (179, '1648881418977935362', '100', '2020-12-31 00:00:00', '按照甲方要求及时完成工作。');
INSERT INTO `cmc_project_progress` VALUES (180, '1648881418965352449', '100', '2020-12-31 00:00:00', '已按计划完成技术服务工作');
INSERT INTO `cmc_project_progress` VALUES (181, '1648881418952769538', '100', '2020-12-31 00:00:00', '按业主要求完成合同内各项工作');
INSERT INTO `cmc_project_progress` VALUES (182, '1648881418940186626', '100', '2020-12-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (183, '1648881418923409409', '10', '2020-03-02 00:00:00', '完成1:10000地形图的内业测图工作');
INSERT INTO `cmc_project_progress` VALUES (184, '1648881418923409409', '30', '2020-03-13 00:00:00', '提交1:10000资用地形图');
INSERT INTO `cmc_project_progress` VALUES (185, '1648881418923409409', '60', '2020-05-08 00:00:00', '完成2000地形图外业飞行，内业编图中。');
INSERT INTO `cmc_project_progress` VALUES (186, '1648881418923409409', '80', '2020-05-15 00:00:00', '提交2000资用地形图；提交部分1000复核后地形图');
INSERT INTO `cmc_project_progress` VALUES (187, '1648881418923409409', '100', '2020-05-20 00:00:00', '已提交全部资用成果资料');
INSERT INTO `cmc_project_progress` VALUES (188, '1648881418910826498', '10', '2020-03-02 00:00:00', '完成1:10000地形图的内业测图工作');
INSERT INTO `cmc_project_progress` VALUES (189, '1648881418910826498', '11', '2020-03-18 00:00:00', '外业4人坐飞机至山南隔离、另3人乘车进场。');
INSERT INTO `cmc_project_progress` VALUES (190, '1648881418910826498', '20', '2020-04-08 00:00:00', '完成主线GNSS点埋设工作');
INSERT INTO `cmc_project_progress` VALUES (191, '1648881418910826498', '70', '2020-05-15 00:00:00', '完成所有外业无人机飞行工作，开始内业生产');
INSERT INTO `cmc_project_progress` VALUES (192, '1648881418910826498', '100', '2020-05-21 00:00:00', '已提交全部资用成果资料');
INSERT INTO `cmc_project_progress` VALUES (193, '1648881418894049281', '50', '2020-03-14 00:00:00', '已提交1:10000资用地形图');
INSERT INTO `cmc_project_progress` VALUES (194, '1648881418894049281', '70', '2020-05-15 00:00:00', '完成所有区域无人机飞行，开始内业生产。');
INSERT INTO `cmc_project_progress` VALUES (195, '1648881418894049281', '90', '2020-05-21 00:00:00', '已提交10000资用地形图，强木金1:5000资用地形图已提交。');
INSERT INTO `cmc_project_progress` VALUES (196, '1648881418894049281', '100', '2020-05-25 00:00:00', '已提交全部资用成果资料。');
INSERT INTO `cmc_project_progress` VALUES (197, '1648881418881466369', '10', '2020-03-25 00:00:00', '完成8条河流地形图野外数据采集工作');
INSERT INTO `cmc_project_progress` VALUES (198, '1648881418881466369', '20', '2020-03-31 00:00:00', '完成全部测区空三加密工作');
INSERT INTO `cmc_project_progress` VALUES (199, '1648881418881466369', '30', '2020-04-27 00:00:00', '基本上完成内业成图，外业调绘工作进场开展。');
INSERT INTO `cmc_project_progress` VALUES (200, '1648881418881466369', '40', '2020-05-10 00:00:00', '完成内业成图、完成部分河段外业调绘工作，内业进行精编。');
INSERT INTO `cmc_project_progress` VALUES (201, '1648881418881466369', '60', '2020-10-30 00:00:00', '完成评审，进入整改阶段');
INSERT INTO `cmc_project_progress` VALUES (202, '1648881418881466369', '80', '2021-03-01 00:00:00', '整改完成、专家组二次评审');
INSERT INTO `cmc_project_progress` VALUES (203, '1648881418881466369', '90', '2021-07-12 00:00:00', '配合业主完成验收及资料上报');
INSERT INTO `cmc_project_progress` VALUES (204, '1648881418881466369', '100', '2021-07-14 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (205, '1648881418864689154', '10', '2020-04-02 00:00:00', '基本控制测量、界桩预制');
INSERT INTO `cmc_project_progress` VALUES (206, '1648881418864689154', '20', '2020-04-10 00:00:00', '界桩埋设130根');
INSERT INTO `cmc_project_progress` VALUES (207, '1648881418864689154', '60', '2020-04-25 00:00:00', '界桩已埋设420个，四个水位牌已做完');
INSERT INTO `cmc_project_progress` VALUES (208, '1648881418864689154', '80', '2020-05-01 00:00:00', '界桩已埋设480个，水位牌已做完');
INSERT INTO `cmc_project_progress` VALUES (209, '1648881418864689154', '95', '2020-05-11 00:00:00', '界桩已全部埋设完成，水位牌已做完');
INSERT INTO `cmc_project_progress` VALUES (210, '1648881418864689154', '100', '2020-06-22 00:00:00', '资料已归档');
INSERT INTO `cmc_project_progress` VALUES (211, '1648881418852106241', '40', '2020-04-22 00:00:00', '公路中桩全长约52.4公里（含隧道桥梁），已完成18公里，项目进行中需配合基础分公司改线测量');
INSERT INTO `cmc_project_progress` VALUES (212, '1648881418852106241', '50', '2020-04-29 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (213, '1648881418852106241', '100', '2020-05-27 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (214, '1648881418835329026', '20', '2020-03-04 00:00:00', '完成茧业公司复建新址地形图外业测绘，正在进行引水路线地形测绘');
INSERT INTO `cmc_project_progress` VALUES (215, '1648881418835329026', '30', '2020-03-07 00:00:00', '业主方增加范围，测量方式改为航飞，完成像控点布设');
INSERT INTO `cmc_project_progress` VALUES (216, '1648881418835329026', '50', '2020-03-10 00:00:00', '航飞完成，内业数据加密');
INSERT INTO `cmc_project_progress` VALUES (217, '1648881418835329026', '70', '2020-03-12 00:00:00', '进行外业上图');
INSERT INTO `cmc_project_progress` VALUES (218, '1648881418835329026', '80', '2020-03-16 00:00:00', '外业上图完成，内业编图');
INSERT INTO `cmc_project_progress` VALUES (219, '1648881418835329026', '100', '2020-03-20 00:00:00', '提交业主成果资料，编写测绘报告');
INSERT INTO `cmc_project_progress` VALUES (220, '1648881418822746114', '10', '2020-03-08 00:00:00', '完成像控点布设和，检查点采集');
INSERT INTO `cmc_project_progress` VALUES (221, '1648881418822746114', '20', '2020-03-09 00:00:00', '外业调图');
INSERT INTO `cmc_project_progress` VALUES (222, '1648881418822746114', '40', '2020-03-11 00:00:00', '航飞完成');
INSERT INTO `cmc_project_progress` VALUES (223, '1648881418822746114', '50', '2020-03-12 00:00:00', '外业上图完成');
INSERT INTO `cmc_project_progress` VALUES (224, '1648881418822746114', '70', '2020-03-13 00:00:00', '提交业主岸上地形图资用成果，按项目部安排，水下部分延后施测。');
INSERT INTO `cmc_project_progress` VALUES (225, '1648881418822746114', '80', '2020-03-20 00:00:00', '水下测量人员进场');
INSERT INTO `cmc_project_progress` VALUES (226, '1648881418822746114', '90', '2020-03-21 00:00:00', '水下地形测量外业工作结束');
INSERT INTO `cmc_project_progress` VALUES (227, '1648881418822746114', '100', '2020-03-24 00:00:00', '提交全部正式成果');
INSERT INTO `cmc_project_progress` VALUES (228, '1648881418810163201', '100', '2020-12-31 00:00:00', '本项目为固定周期性作业项目');
INSERT INTO `cmc_project_progress` VALUES (229, '1648881418793385986', '100', '2020-03-13 00:00:00', '现场工作结束，提交成果');
INSERT INTO `cmc_project_progress` VALUES (230, '1648881418776608769', '100', '2020-03-17 00:00:00', '完成地形图上交');
INSERT INTO `cmc_project_progress` VALUES (231, '1648881418764025857', '10', '2020-03-10 00:00:00', '外业进场');
INSERT INTO `cmc_project_progress` VALUES (232, '1648881418764025857', '20', '2020-03-13 00:00:00', '完成GNSS测量，完成一级坝区像控点测量');
INSERT INTO `cmc_project_progress` VALUES (233, '1648881418764025857', '30', '2020-03-17 00:00:00', '完成两级坝区航飞、完成第5区-第8区飞行');
INSERT INTO `cmc_project_progress` VALUES (234, '1648881418764025857', '40', '2020-03-27 00:00:00', '测图：一级坝址区500测图即将完成');
INSERT INTO `cmc_project_progress` VALUES (235, '1648881418764025857', '70', '2020-04-06 00:00:00', '完成全部外业工作，外业返回成都。');
INSERT INTO `cmc_project_progress` VALUES (236, '1648881418764025857', '100', '2020-04-20 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (237, '1648881418747248642', '50', '2020-03-15 00:00:00', '外业结束，开始编辑资料');
INSERT INTO `cmc_project_progress` VALUES (238, '1648881418747248642', '80', '2020-03-17 00:00:00', '地形图提交检查');
INSERT INTO `cmc_project_progress` VALUES (239, '1648881418747248642', '90', '2020-03-19 00:00:00', '提交资用图，提交质检');
INSERT INTO `cmc_project_progress` VALUES (240, '1648881418747248642', '100', '2020-03-23 00:00:00', '提交正式成果');
INSERT INTO `cmc_project_progress` VALUES (241, '1648881418730471425', '100', '2021-02-28 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (242, '1648881418713694209', '60', '2020-03-16 00:00:00', '外业结束，提交资料到内业');
INSERT INTO `cmc_project_progress` VALUES (243, '1648881418713694209', '80', '2020-03-18 00:00:00', '提交资用图，资料交质量部检查');
INSERT INTO `cmc_project_progress` VALUES (244, '1648881418713694209', '100', '2020-03-19 00:00:00', '提交正式资料');
INSERT INTO `cmc_project_progress` VALUES (245, '1648881418696916993', '40', '2020-04-30 00:00:00', '完成野外数据采集工作');
INSERT INTO `cmc_project_progress` VALUES (246, '1648881418696916993', '50', '2020-04-03 00:00:00', '完成空三加密工作');
INSERT INTO `cmc_project_progress` VALUES (247, '1648881418696916993', '80', '2020-04-07 00:00:00', '航测成图基本完成');
INSERT INTO `cmc_project_progress` VALUES (248, '1648881418696916993', '100', '2020-04-10 00:00:00', '已提交资用资料');
INSERT INTO `cmc_project_progress` VALUES (249, '1648881418680139778', '100', '2020-04-21 00:00:00', '结束外业');
INSERT INTO `cmc_project_progress` VALUES (250, '1648881418680139778', '100', '2020-04-22 00:00:00', '资料提交');
INSERT INTO `cmc_project_progress` VALUES (251, '1648881418663362562', '30', '2020-04-25 00:00:00', '完成乌江大桥跨河水准外业测量工作');
INSERT INTO `cmc_project_progress` VALUES (252, '1648881418663362562', '70', '2020-04-28 00:00:00', '完成北盘江大桥跨河水准测量工作');
INSERT INTO `cmc_project_progress` VALUES (253, '1648881418663362562', '100', '2020-05-10 00:00:00', '完成平差计算');
INSERT INTO `cmc_project_progress` VALUES (254, '1648881418642391041', '100', '2020-05-07 00:00:00', '数据采集');
INSERT INTO `cmc_project_progress` VALUES (255, '1648881418642391041', '100', '2020-05-18 00:00:00', '提交资料');
INSERT INTO `cmc_project_progress` VALUES (256, '1648881418625613825', '100', '2020-05-10 00:00:00', '电子版、纸质版成果已经提交');
INSERT INTO `cmc_project_progress` VALUES (257, '1648881418608836610', '100', '2020-05-15 00:00:00', '完成交通分院指派工作');
INSERT INTO `cmc_project_progress` VALUES (258, '1648881418592059394', '100', '2020-05-18 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (259, '1648881418575282177', '60', '2020-05-16 00:00:00', '完成航飞及野外数据采集工作');
INSERT INTO `cmc_project_progress` VALUES (260, '1648881418575282177', '100', '2020-05-20 00:00:00', '完成地形图采集及初编工作，提交资料。');
INSERT INTO `cmc_project_progress` VALUES (261, '1648881418558504961', '10', '2020-05-27 00:00:00', '像控点完成');
INSERT INTO `cmc_project_progress` VALUES (262, '1648881418558504961', '20', '2020-06-01 00:00:00', '四等、一级控制点埋设完成');
INSERT INTO `cmc_project_progress` VALUES (263, '1648881418558504961', '30', '2020-06-09 00:00:00', '控制点静态观测完成');
INSERT INTO `cmc_project_progress` VALUES (264, '1648881418558504961', '40', '2020-06-29 00:00:00', '水准完成');
INSERT INTO `cmc_project_progress` VALUES (265, '1648881418558504961', '50', '2020-06-28 00:00:00', '三角高程完成');
INSERT INTO `cmc_project_progress` VALUES (266, '1648881418558504961', '60', '2020-06-30 00:00:00', '调绘完成');
INSERT INTO `cmc_project_progress` VALUES (267, '1648881418558504961', '100', '2020-08-05 00:00:00', '提交成果');
INSERT INTO `cmc_project_progress` VALUES (268, '1648881418541727745', '100', '2020-05-29 00:00:00', '正式成果已提交并归档');
INSERT INTO `cmc_project_progress` VALUES (269, '1648881418524950530', '30', '2020-06-21 00:00:00', '现场视频拍摄、全景图拍摄');
INSERT INTO `cmc_project_progress` VALUES (270, '1648881418524950530', '40', '2020-07-03 00:00:00', '文稿配音等');
INSERT INTO `cmc_project_progress` VALUES (271, '1648881418524950530', '50', '2020-07-10 00:00:00', '枢纽区模型制作等');
INSERT INTO `cmc_project_progress` VALUES (272, '1648881418524950530', '70', '2020-07-22 00:00:00', '项目部沟通会，配音文稿修改、增加表现三张图');
INSERT INTO `cmc_project_progress` VALUES (273, '1648881418524950530', '80', '2020-08-04 00:00:00', '视频送审稿提供项目部、环保');
INSERT INTO `cmc_project_progress` VALUES (274, '1648881418524950530', '100', '2020-08-27 00:00:00', '视频提供项目部');
INSERT INTO `cmc_project_progress` VALUES (275, '1648881418508173314', '100', '2020-05-28 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (276, '1648881418495590402', '50', '2020-05-22 00:00:00', '由老图制作完成，交技术质量部提交资料。');
INSERT INTO `cmc_project_progress` VALUES (277, '1648881418495590402', '100', '2020-07-13 00:00:00', '由新图制作完成，交技术质量部提交资料。');
INSERT INTO `cmc_project_progress` VALUES (278, '1648881418483007490', '30', '2020-07-06 00:00:00', '完成隔离以及进场的相关准备工作');
INSERT INTO `cmc_project_progress` VALUES (279, '1648881418483007490', '70', '2020-08-13 00:00:00', '完成外业相关工作');
INSERT INTO `cmc_project_progress` VALUES (280, '1648881418483007490', '90', '2020-10-16 00:00:00', '提交全部成果资料');
INSERT INTO `cmc_project_progress` VALUES (281, '1648881418483007490', '100', '2020-12-18 00:00:00', '业主资料签收');
INSERT INTO `cmc_project_progress` VALUES (282, '1648881418466230273', '100', '2020-06-05 00:00:00', '原计划后续还有圈范围，7月20日询问业主得知后续暂无');
INSERT INTO `cmc_project_progress` VALUES (283, '1648881418453647362', '70', '2020-06-13 00:00:00', '外业结束、内业地形图整编');
INSERT INTO `cmc_project_progress` VALUES (284, '1648881418453647362', '100', '2020-06-23 00:00:00', '资料已提交');
INSERT INTO `cmc_project_progress` VALUES (285, '1648881418441064449', '100', '2020-06-16 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (286, '1648881418424287233', '100', '2020-06-25 00:00:00', '内业整编已完成');
INSERT INTO `cmc_project_progress` VALUES (287, '1648881418411704322', '30', '2020-06-16 00:00:00', '已完成无人机飞行及空三加密。内业开始测图。');
INSERT INTO `cmc_project_progress` VALUES (288, '1648881418411704322', '80', '2020-06-21 00:00:00', '已完成全部外业工作，正在进行地形图编绘。');
INSERT INTO `cmc_project_progress` VALUES (289, '1648881418411704322', '100', '2020-06-25 00:00:00', '已向甲方交付资用地形图资料。');
INSERT INTO `cmc_project_progress` VALUES (290, '1648881418399121410', '60', '2020-01-08 00:00:00', '完成一期地形图转换及补测工作');
INSERT INTO `cmc_project_progress` VALUES (291, '1648881418399121410', '80', '2020-06-10 00:00:00', '完成二期地形图转换及补测工作');
INSERT INTO `cmc_project_progress` VALUES (292, '1648881418399121410', '100', '2020-06-25 00:00:00', '完成全部资料的提交工作');
INSERT INTO `cmc_project_progress` VALUES (293, '1648881418386538498', '14', '2020-06-19 00:00:00', '6页7页完成，剩余12页，共14页');
INSERT INTO `cmc_project_progress` VALUES (294, '1648881418386538498', '100', '2020-06-26 00:00:00', '完成');
INSERT INTO `cmc_project_progress` VALUES (295, '1648881418369761282', '100', '2020-07-14 00:00:00', '地形图已提交，业主求提交资料时间2020-7-10（中途停工3天，导致重复进场工期延误）');
INSERT INTO `cmc_project_progress` VALUES (296, '1648881418369761282', '100', '2020-07-20 00:00:00', '断面数据格式按照业主要求提交');
INSERT INTO `cmc_project_progress` VALUES (297, '1648881418340401153', '70', '2020-07-06 00:00:00', '该项目外业已完成，内业地形图编辑中');
INSERT INTO `cmc_project_progress` VALUES (298, '1648881418340401153', '100', '2020-07-24 00:00:00', '资料已提交给业主');
INSERT INTO `cmc_project_progress` VALUES (299, '1648881418327818241', '100', '2020-07-08 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (300, '1648881418315235330', '90', '2020-07-30 00:00:00', '外业已全部完成，资料已提交内业处理');
INSERT INTO `cmc_project_progress` VALUES (301, '1648881418315235330', '100', '2020-07-31 00:00:00', ' 资料已提交');
INSERT INTO `cmc_project_progress` VALUES (302, '1648881418302652417', '100', '2020-07-27 00:00:00', '现场提交成果');
INSERT INTO `cmc_project_progress` VALUES (303, '1648881418290069506', '10', '2020-08-05 00:00:00', '完成2011年控制点成果复核');
INSERT INTO `cmc_project_progress` VALUES (304, '1648881418290069506', '50', '2020-08-13 00:00:00', '完成重点河段无人机航测，已发回内业加密。');
INSERT INTO `cmc_project_progress` VALUES (305, '1648881418290069506', '70', '2020-08-16 00:00:00', '完成全域三等GNSS测量，开始横断面测量。');
INSERT INTO `cmc_project_progress` VALUES (306, '1648881418290069506', '90', '2020-08-24 00:00:00', '完成全部外业测量工作。');
INSERT INTO `cmc_project_progress` VALUES (307, '1648881418290069506', '100', '2020-08-27 00:00:00', '人员返回成都。');
INSERT INTO `cmc_project_progress` VALUES (308, '1648881418256515073', '5', '2020-08-19 00:00:00', '由于天气情况，甲方已通知撤场，进场时间另行通知');
INSERT INTO `cmc_project_progress` VALUES (309, '1648881418256515073', '50', '2020-08-28 00:00:00', '无人机机载激光已飞完，外业开始调绘工作');
INSERT INTO `cmc_project_progress` VALUES (310, '1648881418256515073', '80', '2020-09-11 00:00:00', '外业调绘结束，内业正在编图');
INSERT INTO `cmc_project_progress` VALUES (311, '1648881418256515073', '100', '2020-09-30 00:00:00', '资料已归档');
INSERT INTO `cmc_project_progress` VALUES (312, '1648881418239737858', '40', '2022-12-31 00:00:00', '质检完成');
INSERT INTO `cmc_project_progress` VALUES (313, '1648881418227154945', '60', '2020-10-10 00:00:00', '结束外业返回成都');
INSERT INTO `cmc_project_progress` VALUES (314, '1648881418227154945', '80', '2020-10-20 00:00:00', '完成地形图及控制平差');
INSERT INTO `cmc_project_progress` VALUES (315, '1648881418227154945', '100', '2020-12-10 00:00:00', '提交测绘部分报告，业主按时间提交验收并通过');
INSERT INTO `cmc_project_progress` VALUES (316, '1648881418214572034', '50', '2020-09-08 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (317, '1648881418214572034', '100', '2020-09-15 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (318, '1648881418197794818', '10', '2020-09-07 00:00:00', '人员进场，开始布设像控点。');
INSERT INTO `cmc_project_progress` VALUES (319, '1648881418197794818', '60', '2020-09-09 00:00:00', '完成像控点布设、开始无人机飞行。');
INSERT INTO `cmc_project_progress` VALUES (320, '1648881418197794818', '80', '2020-09-10 00:00:00', '完成无人机飞机及调绘。外业返回成都。');
INSERT INTO `cmc_project_progress` VALUES (321, '1648881418197794818', '100', '2020-09-18 00:00:00', '将资用成果交付甲方。');
INSERT INTO `cmc_project_progress` VALUES (322, '1648881418185211906', '50', '2020-09-30 00:00:00', '完成数据采集');
INSERT INTO `cmc_project_progress` VALUES (323, '1648881418185211906', '70', '2020-12-31 00:00:00', '完成数据提交');
INSERT INTO `cmc_project_progress` VALUES (324, '1648881418172628994', '30', '2020-09-13 00:00:00', '完成测区控制测量，完成下庄测区无人机飞行。');
INSERT INTO `cmc_project_progress` VALUES (325, '1648881418172628994', '50', '2020-09-14 00:00:00', '完成草坡的无人机飞行，开始内业生产。');
INSERT INTO `cmc_project_progress` VALUES (326, '1648881418172628994', '70', '2020-09-21 00:00:00', '将草坡资用地形图交付甲方。');
INSERT INTO `cmc_project_progress` VALUES (327, '1648881418172628994', '100', '2020-09-25 00:00:00', '将下庄资用地形图交付甲方。');
INSERT INTO `cmc_project_progress` VALUES (328, '1648881418155851778', '100', '2020-09-30 00:00:00', '交付全部项目资料给甲方。');
INSERT INTO `cmc_project_progress` VALUES (329, '1648881418126491649', '100', '2020-09-10 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (330, '1648881418034216962', '20', '2020-10-19 00:00:00', '完成控制测量');
INSERT INTO `cmc_project_progress` VALUES (331, '1648881418034216962', '40', '2020-10-30 00:00:00', '完成无人机飞行、像控点布设');
INSERT INTO `cmc_project_progress` VALUES (332, '1648881418034216962', '50', '2020-11-10 00:00:00', '完成左岸界桩测设');
INSERT INTO `cmc_project_progress` VALUES (333, '1648881418034216962', '80', '2020-11-29 00:00:00', '完成右岸界桩测设');
INSERT INTO `cmc_project_progress` VALUES (334, '1648881418034216962', '100', '2020-12-25 00:00:00', '完成挪桩工作，将电子版成果资料交付甲方。');
INSERT INTO `cmc_project_progress` VALUES (335, '1648881417971302402', '100', '2020-10-18 00:00:00', '土建全部完成、平面网全部观测完成');
INSERT INTO `cmc_project_progress` VALUES (336, '1648881417971302402', '100', '2020-11-09 00:00:00', '重新进场补测水准');
INSERT INTO `cmc_project_progress` VALUES (337, '1648881417954525186', '70', '2020-11-14 00:00:00', '由于中间有些时间段下雪等原因预计11月底完成外业');
INSERT INTO `cmc_project_progress` VALUES (338, '1648881417954525186', '100', '2020-12-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (339, '1648881417904193537', '50', '2020-11-22 00:00:00', '航飞作业完成，像控点刺点完成');
INSERT INTO `cmc_project_progress` VALUES (340, '1648881417904193537', '60', '2020-11-30 00:00:00', '2000坐标-雅砻江坐标系，平面、高程转换模型完成');
INSERT INTO `cmc_project_progress` VALUES (341, '1648881417904193537', '100', '2020-12-17 00:00:00', '成果完成提交');
INSERT INTO `cmc_project_progress` VALUES (342, '1648881417874833410', '50', '2020-10-06 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (343, '1648881417874833410', '100', '2020-10-23 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (344, '1648881417862250498', '50', '2020-10-18 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (345, '1648881417862250498', '100', '2020-10-26 00:00:00', '提交成果');
INSERT INTO `cmc_project_progress` VALUES (346, '1648881417837084674', '50', '2020-10-20 00:00:00', '完成控制测量及平差');
INSERT INTO `cmc_project_progress` VALUES (347, '1648881417837084674', '60', '2020-10-30 00:00:00', '完成航飞外业数据采集');
INSERT INTO `cmc_project_progress` VALUES (348, '1648881417837084674', '80', '2020-11-25 00:00:00', '提交地形图');
INSERT INTO `cmc_project_progress` VALUES (349, '1648881417837084674', '100', '2020-12-28 00:00:00', '提交断面正式成果，完成项目资料提交');
INSERT INTO `cmc_project_progress` VALUES (350, '1648881417820307458', '30', '2020-11-15 00:00:00', '完成选点及土建');
INSERT INTO `cmc_project_progress` VALUES (351, '1648881417820307458', '60', '2020-12-02 00:00:00', '完成外业观测');
INSERT INTO `cmc_project_progress` VALUES (352, '1648881417820307458', '100', '2020-12-12 00:00:00', '完成平差，并现场移交成果');
INSERT INTO `cmc_project_progress` VALUES (353, '1648881417807724546', '50', '2020-10-25 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (354, '1648881417807724546', '70', '2020-11-06 00:00:00', '提交水下地形图');
INSERT INTO `cmc_project_progress` VALUES (355, '1648881417807724546', '100', '2020-11-07 00:00:00', '资料归档');
INSERT INTO `cmc_project_progress` VALUES (356, '1648881417795141633', '70', '2020-10-27 00:00:00', '完成外业工作，移交数据给内业生产');
INSERT INTO `cmc_project_progress` VALUES (357, '1648881417795141633', '80', '2020-10-28 00:00:00', '提交资用资料');
INSERT INTO `cmc_project_progress` VALUES (358, '1648881417795141633', '100', '2020-10-29 00:00:00', '提交正式资料');
INSERT INTO `cmc_project_progress` VALUES (359, '1648881417782558721', '100', '2020-11-10 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (360, '1648881417769975809', '100', '2020-11-22 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (361, '1648881417753198593', '50', '2020-11-03 00:00:00', '搜集资料，开始准备');
INSERT INTO `cmc_project_progress` VALUES (362, '1648881417753198593', '100', '2020-11-05 00:00:00', '完成转换并提交资料');
INSERT INTO `cmc_project_progress` VALUES (363, '1648881417736421378', '50', '2020-10-25 00:00:00', '水下地形数据采集完成');
INSERT INTO `cmc_project_progress` VALUES (364, '1648881417736421378', '70', '2020-11-09 00:00:00', '地形图内页编辑完成');
INSERT INTO `cmc_project_progress` VALUES (365, '1648881417736421378', '100', '2021-07-07 00:00:00', '贯标资料归档');
INSERT INTO `cmc_project_progress` VALUES (366, '1648881417723838466', '100', '2020-11-26 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (367, '1648881417707061250', '60', '2020-12-01 00:00:00', '已完成外业观测');
INSERT INTO `cmc_project_progress` VALUES (368, '1648881417707061250', '100', '2021-03-24 00:00:00', '已完成资料归档及移交工作');
INSERT INTO `cmc_project_progress` VALUES (369, '1648881417644146689', '40', '2020-11-15 00:00:00', '已完成平面复测9点，恢复埋设地面点1个，新建墩标点1个');
INSERT INTO `cmc_project_progress` VALUES (370, '1648881417644146689', '60', '2020-11-17 00:00:00', '平面观测完成。');
INSERT INTO `cmc_project_progress` VALUES (371, '1648881417644146689', '80', '2020-11-29 00:00:00', '内业平差完成');
INSERT INTO `cmc_project_progress` VALUES (372, '1648881417644146689', '100', '2020-12-12 00:00:00', '资料整理完成');
INSERT INTO `cmc_project_progress` VALUES (373, '1648881417564454914', '20', '2020-11-16 00:00:00', '进场，埋设控制点。');
INSERT INTO `cmc_project_progress` VALUES (374, '1648881417564454914', '50', '2020-11-18 00:00:00', '完成GNSS测量。');
INSERT INTO `cmc_project_progress` VALUES (375, '1648881417564454914', '100', '2020-11-21 00:00:00', '完成三角高程、边角网测量、现场移交控制点。');
INSERT INTO `cmc_project_progress` VALUES (376, '1648881417539289089', '50', '2020-12-15 00:00:00', '外业工作完成');
INSERT INTO `cmc_project_progress` VALUES (377, '1648881417539289089', '70', '2020-12-25 00:00:00', '内页工作完成');
INSERT INTO `cmc_project_progress` VALUES (378, '1648881417539289089', '100', '2021-05-24 00:00:00', '资料归档完成');
INSERT INTO `cmc_project_progress` VALUES (379, '1648881417509928962', '40', '2020-12-20 00:00:00', '完成激光数据的采集工作');
INSERT INTO `cmc_project_progress` VALUES (380, '1648881417509928962', '50', '2020-12-31 00:00:00', '完成调绘、修补测及断面测量工作');
INSERT INTO `cmc_project_progress` VALUES (381, '1648881417509928962', '60', '2021-01-12 00:00:00', '完成外业工作，编写测量报告');
INSERT INTO `cmc_project_progress` VALUES (382, '1648881417509928962', '100', '2021-05-19 00:00:00', '提交地形图等相关成果资料');
INSERT INTO `cmc_project_progress` VALUES (383, '1648881417472180225', '40', '2021-01-10 00:00:00', '完场外业工作，移交资料生成测绘产品');
INSERT INTO `cmc_project_progress` VALUES (384, '1648881417472180225', '100', '2021-01-25 00:00:00', '提交资料');
INSERT INTO `cmc_project_progress` VALUES (385, '1648881417438625793', '50', '2020-11-28 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (386, '1648881417438625793', '70', '2020-12-04 00:00:00', '内页完成');
INSERT INTO `cmc_project_progress` VALUES (387, '1648881417438625793', '100', '2021-03-10 00:00:00', '贯标资料完成');
INSERT INTO `cmc_project_progress` VALUES (388, '1648881417400877057', '10', '2021-03-17 00:00:00', '进场与业主联系后开始飞行，后因空域问题暂停');
INSERT INTO `cmc_project_progress` VALUES (389, '1648881417400877057', '30', '2021-03-24 00:00:00', '申请空域过程中，先安排外业完成像控点采集');
INSERT INTO `cmc_project_progress` VALUES (390, '1648881417400877057', '50', '2021-04-20 00:00:00', '飞行结束，完成区域内航飞');
INSERT INTO `cmc_project_progress` VALUES (391, '1648881417400877057', '80', '2021-05-25 00:00:00', 'DOM生产基本完成，开始检查修改工作');
INSERT INTO `cmc_project_progress` VALUES (392, '1648881417400877057', '90', '2021-05-28 00:00:00', '检查修改，提供资用资料给业主使用');
INSERT INTO `cmc_project_progress` VALUES (393, '1648881417400877057', '100', '2021-07-12 00:00:00', '完成项目所有工作，提交项目验收申请');
INSERT INTO `cmc_project_progress` VALUES (394, '1648881417367322626', '60', '2020-12-10 00:00:00', '完成袜业数据采集，开支编辑资料');
INSERT INTO `cmc_project_progress` VALUES (395, '1648881417367322626', '100', '2020-12-14 00:00:00', '提交正式资料');
INSERT INTO `cmc_project_progress` VALUES (396, '1648881417333768193', '100', '2020-11-25 00:00:00', '外业结束');
INSERT INTO `cmc_project_progress` VALUES (397, '1648881417296019457', '50', '2020-12-08 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (398, '1648881417296019457', '70', '2020-12-09 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (399, '1648881417296019457', '100', '2020-12-11 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (400, '1648881417262465026', '60', '2020-12-29 00:00:00', '完成外业数据采集');
INSERT INTO `cmc_project_progress` VALUES (401, '1648881417262465026', '100', '2021-01-06 00:00:00', '完成内业资料编辑，并按要求提交成果');
INSERT INTO `cmc_project_progress` VALUES (402, '1648881417224716290', '100', '2020-12-31 00:00:00', '提交界桩布设成果给甲方。');
INSERT INTO `cmc_project_progress` VALUES (403, '1648881417149218818', '50', '2020-12-28 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (404, '1648881417149218818', '100', '2021-01-05 00:00:00', '资料提交给业主');
INSERT INTO `cmc_project_progress` VALUES (405, '1648881417115664385', '100', '2020-12-31 00:00:00', '共计完成12次观测（按照合同要求每月一次）。');
INSERT INTO `cmc_project_progress` VALUES (406, '1648881417044361218', '50', '2020-12-29 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (407, '1648881417044361218', '100', '2021-01-15 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (408, '1648881417006612482', '40', '2021-01-13 00:00:00', '二滩测区完成');
INSERT INTO `cmc_project_progress` VALUES (409, '1648881417006612482', '80', '2021-01-16 00:00:00', '桐子林测区完成');
INSERT INTO `cmc_project_progress` VALUES (410, '1648881417006612482', '100', '2021-01-30 00:00:00', '提交资料');
INSERT INTO `cmc_project_progress` VALUES (411, '1648881417006612482', '100', '2021-08-19 00:00:00', '资料归档');
INSERT INTO `cmc_project_progress` VALUES (412, '1648881416973058050', '100', '2021-01-29 00:00:00', '全部完成');
INSERT INTO `cmc_project_progress` VALUES (413, '1648881416935309313', '50', '2021-01-26 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (414, '1648881416935309313', '100', '2021-02-28 00:00:00', '资料提交');
INSERT INTO `cmc_project_progress` VALUES (415, '1648881416901754881', '100', '2021-01-11 00:00:00', '提交资料');
INSERT INTO `cmc_project_progress` VALUES (416, '1648881416864006146', '60', '2021-07-21 00:00:00', '按现场业主要求完成相关技术服务工作');
INSERT INTO `cmc_project_progress` VALUES (417, '1648881416864006146', '100', '2021-12-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (418, '1648881416792702977', '40', '2021-01-20 00:00:00', '完成控制测量');
INSERT INTO `cmc_project_progress` VALUES (419, '1648881416792702977', '80', '2021-01-23 00:00:00', '完成地形图补测');
INSERT INTO `cmc_project_progress` VALUES (420, '1648881416792702977', '90', '2021-01-25 00:00:00', '完成水下地形测量');
INSERT INTO `cmc_project_progress` VALUES (421, '1648881416792702977', '100', '2021-01-26 00:00:00', '完成外业调绘，项目外业工作结束');
INSERT INTO `cmc_project_progress` VALUES (422, '1648881416792702977', '100', '2021-01-27 00:00:00', '离场，返回成都');
INSERT INTO `cmc_project_progress` VALUES (423, '1648881416759148545', '20', '2021-01-19 00:00:00', '完成飞行批文办理');
INSERT INTO `cmc_project_progress` VALUES (424, '1648881416759148545', '60', '2020-02-03 00:00:00', '提交岸上部分资用图，资料交质量部检查');
INSERT INTO `cmc_project_progress` VALUES (425, '1648881416759148545', '100', '2021-04-10 00:00:00', '提交正式资料');
INSERT INTO `cmc_project_progress` VALUES (426, '1648881416742371330', '10', '2021-02-28 00:00:00', '激光数据解算，求转换模型');
INSERT INTO `cmc_project_progress` VALUES (427, '1648881416742371330', '30', '2021-03-10 00:00:00', '处理点云和影像');
INSERT INTO `cmc_project_progress` VALUES (428, '1648881416742371330', '90', '2021-03-25 00:00:00', '制作地形图并提交正式成果');
INSERT INTO `cmc_project_progress` VALUES (429, '1648881416742371330', '100', '2021-03-31 00:00:00', '写归档资料');
INSERT INTO `cmc_project_progress` VALUES (430, '1648881416721399809', '30', '2021-01-22 00:00:00', '完成一阶段外业数据采集');
INSERT INTO `cmc_project_progress` VALUES (431, '1648881416721399809', '40', '2021-02-04 00:00:00', '移交工业园区及裸露边坡地形图成果');
INSERT INTO `cmc_project_progress` VALUES (432, '1648881416721399809', '80', '2021-03-05 00:00:00', '移交主次干道测绘成果资料');
INSERT INTO `cmc_project_progress` VALUES (433, '1648881416721399809', '100', '2021-03-13 00:00:00', '移交坡屋顶测绘成果资料，项目资料移交完成');
INSERT INTO `cmc_project_progress` VALUES (434, '1648881416700428290', '100', NULL, '已提交全部成果');
INSERT INTO `cmc_project_progress` VALUES (435, '1648881416679456770', '60', '2021-06-30 00:00:00', '现场按业主要求完成技术服务工作');
INSERT INTO `cmc_project_progress` VALUES (436, '1648881416679456770', '100', '2021-12-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (437, '1648881416658485250', '100', '2021-01-19 00:00:00', '提交范围图');
INSERT INTO `cmc_project_progress` VALUES (438, '1648881416658485250', '100', '2021-02-01 00:00:00', '20210111提交范围图，20210201提交赋色的范围图');
INSERT INTO `cmc_project_progress` VALUES (439, '1648881416641708034', '80', '2022-11-15 00:00:00', '本项目为固定周期性作业项目');
INSERT INTO `cmc_project_progress` VALUES (440, '1648881416641708034', '85', '2021-11-30 00:00:00', '根据甲方委托要求，2021年12月开展年度监测控制网复测工作');
INSERT INTO `cmc_project_progress` VALUES (441, '1648881416641708034', '100', '2021-12-31 00:00:00', '完成全年合同及甲方委托新增监测及零星测绘工作，相关合同费用也按照合同要求同步办理');
INSERT INTO `cmc_project_progress` VALUES (442, '1648881416620736513', '30', '2020-10-30 00:00:00', '内外业完成');
INSERT INTO `cmc_project_progress` VALUES (443, '1648881416620736513', '50', '2020-11-28 00:00:00', '水文计算划定报告完成');
INSERT INTO `cmc_project_progress` VALUES (444, '1648881416620736513', '60', '2021-05-07 00:00:00', '审查修改后签署审查意见');
INSERT INTO `cmc_project_progress` VALUES (445, '1648881416620736513', '90', '2021-06-25 00:00:00', '桩牌安装完成');
INSERT INTO `cmc_project_progress` VALUES (446, '1648881416620736513', '100', '2021-05-28 00:00:00', '数据预检结束并通过验收');
INSERT INTO `cmc_project_progress` VALUES (447, '1648881416603959298', '20', '2021-01-26 00:00:00', '完成控制测量。');
INSERT INTO `cmc_project_progress` VALUES (448, '1648881416603959298', '40', '2021-01-28 00:00:00', '完成水下地形测量。');
INSERT INTO `cmc_project_progress` VALUES (449, '1648881416603959298', '70', '2021-01-31 00:00:00', '完成全部外业工作，外业返回成都。');
INSERT INTO `cmc_project_progress` VALUES (450, '1648881416603959298', '100', '2021-02-15 00:00:00', '交资用成果交付甲方。');
INSERT INTO `cmc_project_progress` VALUES (451, '1648881416578793474', '100', '2021-12-31 00:00:00', '按合同完成');
INSERT INTO `cmc_project_progress` VALUES (452, '1648881416557821953', '100', '2021-12-31 00:00:00', '按合同完成');
INSERT INTO `cmc_project_progress` VALUES (453, '1648881416520073217', '70', '2021-02-01 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (454, '1648881416520073217', '100', '2021-02-22 00:00:00', '提交资料');
INSERT INTO `cmc_project_progress` VALUES (455, '1648881416499101698', '60', '2021-02-03 00:00:00', '结束外业返回成都');
INSERT INTO `cmc_project_progress` VALUES (456, '1648881416499101698', '100', '2021-02-19 00:00:00', '提交资料');
INSERT INTO `cmc_project_progress` VALUES (457, '1648881416482324482', '100', '2021-03-05 00:00:00', '提交资料');
INSERT INTO `cmc_project_progress` VALUES (458, '1648881416465547266', '10', '2021-02-12 00:00:00', '完成GNSS点选埋及GNSS网观测');
INSERT INTO `cmc_project_progress` VALUES (459, '1648881416465547266', '20', '2021-02-20 00:00:00', '完成静态观测及三角高程');
INSERT INTO `cmc_project_progress` VALUES (460, '1648881416465547266', '40', '2021-03-15 00:00:00', '完成调绘及修补测，移交内业处理');
INSERT INTO `cmc_project_progress` VALUES (461, '1648881416465547266', '100', '2021-04-29 00:00:00', '提交地形图等相关成果资料');
INSERT INTO `cmc_project_progress` VALUES (462, '1648881416444575746', '60', '2021-04-20 00:00:00', '完成外业数据采集工作');
INSERT INTO `cmc_project_progress` VALUES (463, '1648881416444575746', '100', '2021-04-29 00:00:00', '提交全部正式资料');
INSERT INTO `cmc_project_progress` VALUES (464, '1648881416427798530', '10', '2021-02-20 00:00:00', '完成地东乡以上的控制测量及像控点测量');
INSERT INTO `cmc_project_progress` VALUES (465, '1648881416427798530', '20', '2021-03-10 00:00:00', '完成相控点布设');
INSERT INTO `cmc_project_progress` VALUES (466, '1648881416427798530', '30', '2021-03-14 00:00:00', '移交10000范围地形图，完成2000地形图调绘及修补测');
INSERT INTO `cmc_project_progress` VALUES (467, '1648881416427798530', '40', '2021-03-25 00:00:00', '完成控制测量及水下地形星测量');
INSERT INTO `cmc_project_progress` VALUES (468, '1648881416427798530', '70', '2021-04-08 00:00:00', '外业结束，内业数据处理，报告编写');
INSERT INTO `cmc_project_progress` VALUES (469, '1648881416427798530', '100', '2021-04-29 00:00:00', '提交相关成果文件');
INSERT INTO `cmc_project_progress` VALUES (470, '1648881416411021314', '10', '2021-02-12 00:00:00', '完成GNSS点选埋及GNSS网观测');
INSERT INTO `cmc_project_progress` VALUES (471, '1648881416411021314', '20', '2021-02-15 00:00:00', '完成三角高程测量');
INSERT INTO `cmc_project_progress` VALUES (472, '1648881416411021314', '40', '2021-03-10 00:00:00', '完成外业工作');
INSERT INTO `cmc_project_progress` VALUES (473, '1648881416411021314', '100', '2021-04-30 00:00:00', '提交地形图等相关成果资料');
INSERT INTO `cmc_project_progress` VALUES (474, '1648881416394244098', '100', '2021-02-25 00:00:00', '已按要求时间提交资料');
INSERT INTO `cmc_project_progress` VALUES (475, '1648881416377466882', '100', '2021-10-10 00:00:00', '由于项目需要配合征地，工作时间比要求完成时间长');
INSERT INTO `cmc_project_progress` VALUES (476, '1648881416360689665', '100', '2021-03-08 00:00:00', '完成');
INSERT INTO `cmc_project_progress` VALUES (477, '1648881416343912449', '80', '2021-03-18 00:00:00', '外业测量及内业成图完成，交公司检查');
INSERT INTO `cmc_project_progress` VALUES (478, '1648881416343912449', '100', '2021-03-25 00:00:00', '内业检查完成，成果完成提交');
INSERT INTO `cmc_project_progress` VALUES (479, '1648881416327135233', '10', '2021-03-13 00:00:00', '外业进场；');
INSERT INTO `cmc_project_progress` VALUES (480, '1648881416327135233', '100', '2021-03-24 00:00:00', '完成全部外业工作，出场。');
INSERT INTO `cmc_project_progress` VALUES (481, '1648881416310358017', '100', '2021-03-19 00:00:00', '最终成果已全部提交');
INSERT INTO `cmc_project_progress` VALUES (482, '1648881416293580802', '100', '2021-03-22 00:00:00', '最终成果已全部提交');
INSERT INTO `cmc_project_progress` VALUES (483, '1648881416276803586', '100', '2021-03-26 00:00:00', '最终成果已全部提交');
INSERT INTO `cmc_project_progress` VALUES (484, '1648881416260026369', '100', '2021-04-12 00:00:00', '资用成果已全部提交');
INSERT INTO `cmc_project_progress` VALUES (485, '1648881416243249154', '20', '2021-03-12 00:00:00', '完成控制点埋设');
INSERT INTO `cmc_project_progress` VALUES (486, '1648881416243249154', '40', '2021-03-13 00:00:00', '完成控制点静态观测');
INSERT INTO `cmc_project_progress` VALUES (487, '1648881416243249154', '60', '2021-03-14 00:00:00', '完成像控点采集');
INSERT INTO `cmc_project_progress` VALUES (488, '1648881416243249154', '70', '2021-03-16 00:00:00', '完成航飞');
INSERT INTO `cmc_project_progress` VALUES (489, '1648881416243249154', '80', '2021-03-17 00:00:00', '完成外业调绘');
INSERT INTO `cmc_project_progress` VALUES (490, '1648881416243249154', '90', '2021-03-21 00:00:00', '完成内业测图，提交资用图');
INSERT INTO `cmc_project_progress` VALUES (491, '1648881416243249154', '100', '2021-03-24 00:00:00', '提交正式成果');
INSERT INTO `cmc_project_progress` VALUES (492, '1648881416226471938', '100', '2021-03-26 00:00:00', '最终成果已全部提交');
INSERT INTO `cmc_project_progress` VALUES (493, '1648881416213889025', '80', '2021-04-13 00:00:00', '资用已提交');
INSERT INTO `cmc_project_progress` VALUES (494, '1648881416213889025', '90', '2021-06-22 00:00:00', '地形图已经二查');
INSERT INTO `cmc_project_progress` VALUES (495, '1648881416213889025', '100', '2021-06-28 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (496, '1648881416197111809', '1', '2021-03-26 00:00:00', '外业进场；');
INSERT INTO `cmc_project_progress` VALUES (497, '1648881416197111809', '20', '2021-04-05 00:00:00', '完成尼洋河汇口以下段激光、影像数据采集；');
INSERT INTO `cmc_project_progress` VALUES (498, '1648881416197111809', '40', '2021-04-23 00:00:00', '完成全域激光数据获取；');
INSERT INTO `cmc_project_progress` VALUES (499, '1648881416197111809', '60', '2021-05-18 00:00:00', '完成340平方公里外业调绘工作；');
INSERT INTO `cmc_project_progress` VALUES (500, '1648881416197111809', '70', '2021-05-27 00:00:00', '完成430平方公里外业调绘工作；');
INSERT INTO `cmc_project_progress` VALUES (501, '1648881416197111809', '80', '2021-06-06 00:00:00', '完成560平方公里外业调绘工作；');
INSERT INTO `cmc_project_progress` VALUES (502, '1648881416197111809', '90', '2021-06-19 00:00:00', '完成全域1:1000/1:2000外业调绘工作；');
INSERT INTO `cmc_project_progress` VALUES (503, '1648881416197111809', '100', '2021-07-12 00:00:00', '完成全部外业工作；外业出场。');
INSERT INTO `cmc_project_progress` VALUES (504, '1648881416184528898', '90', '2021-04-07 00:00:00', '成果正由技术部门进行质检');
INSERT INTO `cmc_project_progress` VALUES (505, '1648881416184528898', '100', '2021-04-15 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (506, '1648881416163557378', '50', '2021-03-26 00:00:00', '完成像控点及检查点测量。');
INSERT INTO `cmc_project_progress` VALUES (507, '1648881416163557378', '100', '2021-03-27 00:00:00', '完成全部外业工作，外业返回参与其它项目。');
INSERT INTO `cmc_project_progress` VALUES (508, '1648881416146780162', '50', '2021-04-24 00:00:00', '外业调绘完成');
INSERT INTO `cmc_project_progress` VALUES (509, '1648881416146780162', '80', '2021-05-02 00:00:00', '内页编辑成图完成');
INSERT INTO `cmc_project_progress` VALUES (510, '1648881416146780162', '100', '2021-05-06 00:00:00', '提交资料给业主');
INSERT INTO `cmc_project_progress` VALUES (511, '1648881416130002945', '50', '2021-05-18 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (512, '1648881416130002945', '80', '2021-05-19 00:00:00', '内页成图完成');
INSERT INTO `cmc_project_progress` VALUES (513, '1648881416117420033', '60', '2021-03-27 00:00:00', '外业航飞，像控，检查点');
INSERT INTO `cmc_project_progress` VALUES (514, '1648881416117420033', '100', '2021-04-08 00:00:00', '提交地形图成果');
INSERT INTO `cmc_project_progress` VALUES (515, '1648881416100642818', '100', '2021-04-08 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (516, '1648881416083865601', '100', '2018-10-15 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (517, '1648881416062894082', '100', '2021-04-19 00:00:00', '外业工作已完成');
INSERT INTO `cmc_project_progress` VALUES (518, '1648881416046116866', '100', '2021-04-19 00:00:00', 'DOM制作');
INSERT INTO `cmc_project_progress` VALUES (519, '1648881416046116866', '100', '2021-04-19 00:00:00', '坐标转换');
INSERT INTO `cmc_project_progress` VALUES (520, '1648881416029339649', '40', '2021-04-24 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (521, '1648881416029339649', '80', '2021-04-30 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (522, '1648881416029339649', '90', '2021-05-06 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (523, '1648881416029339649', '100', '2021-05-13 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (524, '1648881416012562433', '70', '2021-05-24 00:00:00', '资用图已交');
INSERT INTO `cmc_project_progress` VALUES (525, '1648881416012562433', '100', '2021-06-28 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (526, '1648881415991590913', '40', '2021-04-27 00:00:00', '外业无人机航飞、视频拍摄完成');
INSERT INTO `cmc_project_progress` VALUES (527, '1648881415991590913', '80', '2021-05-10 00:00:00', '原计划工作目标正射影像制作完成');
INSERT INTO `cmc_project_progress` VALUES (528, '1648881415991590913', '90', '2021-05-11 00:00:00', '增补正射影像制作完成');
INSERT INTO `cmc_project_progress` VALUES (529, '1648881415991590913', '100', '2021-05-13 00:00:00', '增补地形图制作完成（委外）');
INSERT INTO `cmc_project_progress` VALUES (530, '1648881415991590913', '100', '2021-05-17 00:00:00', '按业主要求重采样所有正射影像为一整幅（0.2m,0.5m各一份）');
INSERT INTO `cmc_project_progress` VALUES (531, '1648881415979008002', '100', '2021-04-30 00:00:00', '项目已结束，成果报告已提交技术质量部归档');
INSERT INTO `cmc_project_progress` VALUES (532, '1648881415949647874', '100', '2021-06-30 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (533, '1648881415932870657', '100', '2021-04-23 00:00:00', '核实地形图');
INSERT INTO `cmc_project_progress` VALUES (534, '1648881415932870657', '100', '2021-04-25 00:00:00', '放线');
INSERT INTO `cmc_project_progress` VALUES (535, '1648881415932870657', '100', '2021-04-27 00:00:00', '地块测量');
INSERT INTO `cmc_project_progress` VALUES (536, '1648881415932870657', '100', '2021-04-28 00:00:00', '地块调查');
INSERT INTO `cmc_project_progress` VALUES (537, '1648881415911899138', '20', '2021-05-25 00:00:00', '现场开展实物指标调查配合工作和界桩制作工作');
INSERT INTO `cmc_project_progress` VALUES (538, '1648881415911899138', '40', '2021-06-30 00:00:00', '基本完成右岸界桩埋设');
INSERT INTO `cmc_project_progress` VALUES (539, '1648881415911899138', '80', '2021-07-20 00:00:00', '完成水位牌安装及左右岸主要界桩埋设，目前正在查缺补漏');
INSERT INTO `cmc_project_progress` VALUES (540, '1648881415911899138', '100', '2021-09-10 00:00:00', '完成外业工作，并提交成果及报告');
INSERT INTO `cmc_project_progress` VALUES (541, '1648881415895121921', '20', '2021-05-25 00:00:00', '现场配合和实物指标调查，制作界桩');
INSERT INTO `cmc_project_progress` VALUES (542, '1648881415895121921', '40', '2021-06-20 00:00:00', '完成右岸界桩埋设');
INSERT INTO `cmc_project_progress` VALUES (543, '1648881415895121921', '80', '2021-07-20 00:00:00', '完成水位牌安装及左右岸主要界桩埋设，目前正在查缺补漏');
INSERT INTO `cmc_project_progress` VALUES (544, '1648881415895121921', '100', '2021-09-10 00:00:00', '完成外业工作，并提交成果及报告');
INSERT INTO `cmc_project_progress` VALUES (545, '1648881415878344705', '70', '2021-05-24 00:00:00', '资用');
INSERT INTO `cmc_project_progress` VALUES (546, '1648881415878344705', '99', '2021-06-30 00:00:00', '二查完成，控制点成果未提交内业');
INSERT INTO `cmc_project_progress` VALUES (547, '1648881415878344705', '100', '2021-07-15 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (548, '1648881415861567490', '60', '2021-05-01 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (549, '1648881415861567490', '100', '2021-05-02 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (550, '1648881415844790273', '30', '2021-04-20 00:00:00', '完成卧龙镇外业测量工作；');
INSERT INTO `cmc_project_progress` VALUES (551, '1648881415844790273', '60', '2021-05-05 00:00:00', '完成了朗县测区无人机飞行及像控点测量；');
INSERT INTO `cmc_project_progress` VALUES (552, '1648881415844790273', '100', '2021-05-17 00:00:00', '将成果资料交付甲方。');
INSERT INTO `cmc_project_progress` VALUES (553, '1648881415832207361', '50', '2021-05-04 00:00:00', '完成测区约60%无雪区域的无人机飞行。');
INSERT INTO `cmc_project_progress` VALUES (554, '1648881415832207361', '80', '2021-05-18 00:00:00', '第一批、第二批提供范围外业飞行已完成，外业撤场。');
INSERT INTO `cmc_project_progress` VALUES (555, '1648881415832207361', '100', '2021-05-22 00:00:00', '提交资用地形图。');
INSERT INTO `cmc_project_progress` VALUES (556, '1648881415815430146', '50', '2023-08-25 00:00:00', '项目进度根据现场施工进度预估');
INSERT INTO `cmc_project_progress` VALUES (557, '1648881415798652929', '100', NULL, NULL);
INSERT INTO `cmc_project_progress` VALUES (558, '1648881415781875714', '100', '2021-05-19 00:00:00', '中间成果已经提交，在归档资料，项目负责管理。');
INSERT INTO `cmc_project_progress` VALUES (559, '1648881415765098497', '100', '2021-05-19 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (560, '1648881415748321281', '90', '2021-05-27 00:00:00', '正式成果已提交，贯标资料未交');
INSERT INTO `cmc_project_progress` VALUES (561, '1648881415727349761', '30', '2021-05-29 00:00:00', '完成铜街子外业工作');
INSERT INTO `cmc_project_progress` VALUES (562, '1648881415727349761', '40', '2021-05-31 00:00:00', '完成外业工作，开始内业制图及数据整理');
INSERT INTO `cmc_project_progress` VALUES (563, '1648881415727349761', '80', '2021-06-22 00:00:00', '提交坐标转换前的正式资料');
INSERT INTO `cmc_project_progress` VALUES (564, '1648881415727349761', '100', '2021-07-05 00:00:00', '提交坐标及高程转换后的地形图等相关成果资料');
INSERT INTO `cmc_project_progress` VALUES (565, '1648881415685406721', '90', '2021-06-09 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (566, '1648881415685406721', '100', '2021-06-10 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (567, '1648881415668629506', '40', '2021-06-11 00:00:00', '完成航飞、像控、检查点测量等外业工作，并将航飞资料提交给内业');
INSERT INTO `cmc_project_progress` VALUES (568, '1648881415668629506', '50', '2021-06-14 00:00:00', '完成空三加密工作');
INSERT INTO `cmc_project_progress` VALUES (569, '1648881415668629506', '100', '2021-06-24 00:00:00', '提交资用资料');
INSERT INTO `cmc_project_progress` VALUES (570, '1648881415647657985', '100', '2021-06-18 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (571, '1648881415630880769', '20', '2021-06-24 00:00:00', '完成1:500地形图范围修补测');
INSERT INTO `cmc_project_progress` VALUES (572, '1648881415630880769', '50', '2021-06-28 00:00:00', '提交外业修补测及调绘数据，内业编图');
INSERT INTO `cmc_project_progress` VALUES (573, '1648881415630880769', '70', '2021-07-05 00:00:00', '提交移民安置点500及垫高防护2000地形图（其中一块）资用成果');
INSERT INTO `cmc_project_progress` VALUES (574, '1648881415630880769', '100', '2021-07-20 00:00:00', '提交地形图等相关成果资料');
INSERT INTO `cmc_project_progress` VALUES (575, '1648881415609909250', '100', '2021-06-28 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (576, '1648881415588937730', '100', '2021-07-05 00:00:00', '项目终止');
INSERT INTO `cmc_project_progress` VALUES (577, '1648881415567966210', '10', '2021-07-05 00:00:00', '进场');
INSERT INTO `cmc_project_progress` VALUES (578, '1648881415567966210', '40', '2021-07-10 00:00:00', '完成外业飞行，将成果资料交付内业；');
INSERT INTO `cmc_project_progress` VALUES (579, '1648881415567966210', '90', '2021-07-14 00:00:00', '完成外业调绘工作');
INSERT INTO `cmc_project_progress` VALUES (580, '1648881415567966210', '100', '2021-07-16 00:00:00', '出场，外业返回成都。');
INSERT INTO `cmc_project_progress` VALUES (581, '1648881415551188994', '50', '2021-07-12 00:00:00', '外业结束');
INSERT INTO `cmc_project_progress` VALUES (582, '1648881415551188994', '100', '2021-07-21 00:00:00', '提交地形图资用资料');
INSERT INTO `cmc_project_progress` VALUES (583, '1648881415530217473', '80', '2021-07-24 00:00:00', '资用图');
INSERT INTO `cmc_project_progress` VALUES (584, '1648881415530217473', '100', '2021-07-28 00:00:00', '检查');
INSERT INTO `cmc_project_progress` VALUES (585, '1648881415513440258', '100', '2021-07-14 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (586, '1648881415492468738', '20', '2021-07-22 00:00:00', '土建结束');
INSERT INTO `cmc_project_progress` VALUES (587, '1648881415492468738', '30', '2021-07-23 00:00:00', 'GNSS联测结束');
INSERT INTO `cmc_project_progress` VALUES (588, '1648881415492468738', '70', '2021-07-30 00:00:00', '控制网（平面、水准）观测结束');
INSERT INTO `cmc_project_progress` VALUES (589, '1648881415492468738', '100', '2021-08-25 00:00:00', '成果报告全部提交');
INSERT INTO `cmc_project_progress` VALUES (590, '1648881415475691522', '10', '2021-07-19 00:00:00', '完成影像采集及外业相控');
INSERT INTO `cmc_project_progress` VALUES (591, '1648881415475691522', '50', '2021-08-06 00:00:00', '内业完成采集，外调完成50%');
INSERT INTO `cmc_project_progress` VALUES (592, '1648881415475691522', '100', '2021-08-30 00:00:00', '地形图与DOM、三维模型完成，待验收');
INSERT INTO `cmc_project_progress` VALUES (593, '1648881415458914305', '50', '2021-07-30 00:00:00', '结束外业工作，数据返回内业处理');
INSERT INTO `cmc_project_progress` VALUES (594, '1648881415458914305', '80', '2021-08-06 00:00:00', '资用资料提交');
INSERT INTO `cmc_project_progress` VALUES (595, '1648881415458914305', '100', '2021-08-11 00:00:00', '提交所有成果产品');
INSERT INTO `cmc_project_progress` VALUES (596, '1648881415446331394', '40', '2021-07-28 00:00:00', '完成像控点、图根点布设');
INSERT INTO `cmc_project_progress` VALUES (597, '1648881415446331394', '80', '2021-07-29 00:00:00', '调绘完成');
INSERT INTO `cmc_project_progress` VALUES (598, '1648881415446331394', '100', '2021-08-06 00:00:00', '完成贯标资料');
INSERT INTO `cmc_project_progress` VALUES (599, '1648881415429554178', '100', '2021-08-02 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (600, '1648881415412776962', '10', '2021-08-17 00:00:00', '外业进场；');
INSERT INTO `cmc_project_progress` VALUES (601, '1648881415412776962', '30', '2021-08-19 00:00:00', '完成1:500测绘区域的无人机飞行；');
INSERT INTO `cmc_project_progress` VALUES (602, '1648881415412776962', '50', '2021-09-29 00:00:00', '完成1:500地形图测绘区的外业调绘工作。');
INSERT INTO `cmc_project_progress` VALUES (603, '1648881415412776962', '100', '2021-12-06 00:00:00', '完成横断面、水下地形等全部工作。');
INSERT INTO `cmc_project_progress` VALUES (604, '1648881415395999745', '100', '2021-08-21 00:00:00', '外业控制测量完成');
INSERT INTO `cmc_project_progress` VALUES (605, '1648881415395999745', '70', '2021-08-21 00:00:00', '地形图资用成果提交');
INSERT INTO `cmc_project_progress` VALUES (606, '1648881415395999745', '100', '2021-09-03 00:00:00', '外业调绘完成以及零星工作');
INSERT INTO `cmc_project_progress` VALUES (607, '1648881415395999745', '100', '2021-09-10 00:00:00', '地形图正式成果提交');
INSERT INTO `cmc_project_progress` VALUES (608, '1648881415395999745', '100', '2021-09-17 00:00:00', '三维建模成果提交');
INSERT INTO `cmc_project_progress` VALUES (609, '1648881415375028225', '10', '2021-07-25 00:00:00', '外业进场。');
INSERT INTO `cmc_project_progress` VALUES (610, '1648881415375028225', '60', '2021-07-28 00:00:00', '完成无人机飞行。');
INSERT INTO `cmc_project_progress` VALUES (611, '1648881415375028225', '90', '2021-07-29 00:00:00', '完成全部外业工作。');
INSERT INTO `cmc_project_progress` VALUES (612, '1648881415375028225', '100', '2021-07-30 00:00:00', '外业出场。');
INSERT INTO `cmc_project_progress` VALUES (613, '1648881415362445314', '100', '2021-08-12 00:00:00', '自然资源部验收通过，还未回款');
INSERT INTO `cmc_project_progress` VALUES (614, '1648881415349862402', '70', '2021-03-01 00:00:00', '已交件，收款70%，后续工作为甲方审核颁证');
INSERT INTO `cmc_project_progress` VALUES (615, '1648881415333085186', '100', '2021-07-30 00:00:00', '7月30日上午提交到技术质量部');
INSERT INTO `cmc_project_progress` VALUES (616, '1648881415286947841', '70', '2021-08-16 00:00:00', '内业完成等待外调');
INSERT INTO `cmc_project_progress` VALUES (617, '1648881415286947841', '90', '2021-08-25 00:00:00', '编辑地类图斑交检查');
INSERT INTO `cmc_project_progress` VALUES (618, '1648881415286947841', '100', '2021-08-26 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (619, '1648881415265976322', '50', '2021-08-16 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (620, '1648881415265976322', '80', '2021-08-20 00:00:00', '内业完成');
INSERT INTO `cmc_project_progress` VALUES (621, '1648881415265976322', '100', '2021-08-26 00:00:00', '资料归档');
INSERT INTO `cmc_project_progress` VALUES (622, '1648881415240810497', '100', '2021-09-07 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (623, '1648881415219838978', '50', '2021-12-21 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (624, '1648881415219838978', '80', '2022-05-05 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (625, '1648881415219838978', '100', '2022-12-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (626, '1648881415186284546', '10', '2021-08-11 00:00:00', '外业进场、开展外业工作。');
INSERT INTO `cmc_project_progress` VALUES (627, '1648881415186284546', '100', '2021-08-16 00:00:00', '完成全部外业工作。');
INSERT INTO `cmc_project_progress` VALUES (628, '1648881415064649729', '100', '2021-08-11 00:00:00', '完成激光数据采集工作，因业主方选址问题，项目暂停');
INSERT INTO `cmc_project_progress` VALUES (629, '1648881415047872514', '5', '2021-08-25 00:00:00', '拿到数据开始处理，数据回来70%，计划8月30号把已回来数据交资用');
INSERT INTO `cmc_project_progress` VALUES (630, '1648881415047872514', '50', '2021-08-30 00:00:00', '已回数据提交资用');
INSERT INTO `cmc_project_progress` VALUES (631, '1648881415047872514', '80', '2021-09-09 00:00:00', '资料9月5号返回，计划9月9号提交所有资用图');
INSERT INTO `cmc_project_progress` VALUES (632, '1648881415047872514', '100', '2021-09-15 00:00:00', '除新增范围外已经全部完成');
INSERT INTO `cmc_project_progress` VALUES (633, '1648881415026900993', '10', '2021-10-25 00:00:00', '完成档案扫描1.8万宗，内业矢量1.5万宗');
INSERT INTO `cmc_project_progress` VALUES (634, '1648881415026900993', '40', '2021-11-25 00:00:00', '完成档案扫描7.8万宗，内业矢量6.5万宗');
INSERT INTO `cmc_project_progress` VALUES (635, '1648881415026900993', '70', '2021-12-08 00:00:00', '完成档案扫描14.2万宗，内业矢量12.1万宗');
INSERT INTO `cmc_project_progress` VALUES (636, '1648881415026900993', '90', '2022-12-30 00:00:00', '完成142386宗林权数据');
INSERT INTO `cmc_project_progress` VALUES (637, '1648881415026900993', '99', '2023-01-31 00:00:00', '完成市级汇交');
INSERT INTO `cmc_project_progress` VALUES (638, '1648881415001735169', '10', '2021-08-17 00:00:00', '外业进场，开展外业工作；');
INSERT INTO `cmc_project_progress` VALUES (639, '1648881415001735169', '100', '2021-08-20 00:00:00', '结束全部外业工作，返回成都。');
INSERT INTO `cmc_project_progress` VALUES (640, '1648881414976569346', '20', '2021-08-17 00:00:00', '完成像控点测量');
INSERT INTO `cmc_project_progress` VALUES (641, '1648881414976569346', '60', '2021-09-03 00:00:00', '调绘，检查点，图根点完成');
INSERT INTO `cmc_project_progress` VALUES (642, '1648881414976569346', '100', '2021-09-10 00:00:00', '资料提交');
INSERT INTO `cmc_project_progress` VALUES (643, '1648881414951403522', '30', '2021-08-30 00:00:00', '完成地形图测绘区域的无人机外业飞行；');
INSERT INTO `cmc_project_progress` VALUES (644, '1648881414951403522', '100', '2021-09-01 00:00:00', '完成全部外业工作，外业出场。');
INSERT INTO `cmc_project_progress` VALUES (645, '1648881414926237697', '10', '2021-09-18 00:00:00', '批文办理、人员进驻现场');
INSERT INTO `cmc_project_progress` VALUES (646, '1648881414926237697', '20', '2021-10-08 00:00:00', '基本完成主河道的航飞工作，开始补飞边角区域');
INSERT INTO `cmc_project_progress` VALUES (647, '1648881414926237697', '40', '2021-11-01 00:00:00', '基本完成飞行，坝址区1000地形图调绘完成，铁路影响区提交资用图');
INSERT INTO `cmc_project_progress` VALUES (648, '1648881414926237697', '80', '2022-03-25 00:00:00', '外业工作结束，继续地形图编辑及资料整编');
INSERT INTO `cmc_project_progress` VALUES (649, '1648881414926237697', '100', '2022-03-31 00:00:00', '提交地形图产品');
INSERT INTO `cmc_project_progress` VALUES (650, '1648881414905266178', '80', '2021-09-10 00:00:00', '提交资用');
INSERT INTO `cmc_project_progress` VALUES (651, '1648881414905266178', '100', '2021-09-17 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (652, '1648881414880100353', '20', '2021-08-28 00:00:00', '完成现场影像及激光点云采集工作');
INSERT INTO `cmc_project_progress` VALUES (653, '1648881414880100353', '40', '2021-09-03 00:00:00', '完成三维模型、DOM、DEM及着色点云等产品');
INSERT INTO `cmc_project_progress` VALUES (654, '1648881414880100353', '50', '2021-09-16 00:00:00', '现场演练暂停');
INSERT INTO `cmc_project_progress` VALUES (655, '1648881414880100353', '100', '2021-10-14 00:00:00', '正式演练结束，项目完成');
INSERT INTO `cmc_project_progress` VALUES (656, '1648881414859128834', '100', '2021-09-04 00:00:00', '项目完成');
INSERT INTO `cmc_project_progress` VALUES (657, '1648881414812991489', '40', '2021-09-10 00:00:00', '完成外业激光和影像飞行任务');
INSERT INTO `cmc_project_progress` VALUES (658, '1648881414812991489', '80', '2021-09-17 00:00:00', '提供资用地形图');
INSERT INTO `cmc_project_progress` VALUES (659, '1648881414812991489', '100', '2021-09-26 00:00:00', '提交所有成果资料');
INSERT INTO `cmc_project_progress` VALUES (660, '1648881414796214274', '100', '2021-09-09 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (661, '1648881414775242753', '20', '2021-09-14 00:00:00', '完成1区外业工作，准备转场2区');
INSERT INTO `cmc_project_progress` VALUES (662, '1648881414775242753', '30', '2021-09-16 00:00:00', '完成二区外业工作，转场3区');
INSERT INTO `cmc_project_progress` VALUES (663, '1648881414775242753', '50', '2021-09-20 00:00:00', '外业结束，内业正在处理数据');
INSERT INTO `cmc_project_progress` VALUES (664, '1648881414775242753', '100', '2021-09-29 00:00:00', '提交地形图产品');
INSERT INTO `cmc_project_progress` VALUES (665, '1648881414750076930', '10', '2022-03-31 00:00:00', '完成临时界桩测设180根、完成征地桩测设100根；');
INSERT INTO `cmc_project_progress` VALUES (666, '1648881414750076930', '100', '2022-04-28 00:00:00', '完成全部外业工作，人员撤场，开始资料整编；');
INSERT INTO `cmc_project_progress` VALUES (667, '1648881414729105410', '10', '2021-09-12 00:00:00', '进场；');
INSERT INTO `cmc_project_progress` VALUES (668, '1648881414729105410', '100', '2021-09-13 00:00:00', '完成无人机飞行，外业调绘工作。');
INSERT INTO `cmc_project_progress` VALUES (669, '1648881414712328193', '90', '2021-09-20 00:00:00', '提交资用成果');
INSERT INTO `cmc_project_progress` VALUES (670, '1648881414712328193', '100', '2021-11-18 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (671, '1648881414695550978', '40', '2021-10-13 00:00:00', '外业作业时间');
INSERT INTO `cmc_project_progress` VALUES (672, '1648881414695550978', '100', '2021-11-17 00:00:00', '内业正式成果提交');
INSERT INTO `cmc_project_progress` VALUES (673, '1648881414674579458', '50', '2021-10-21 00:00:00', '完成外业像控点布设，等待天气航飞；');
INSERT INTO `cmc_project_progress` VALUES (674, '1648881414674579458', '80', '2021-11-16 00:00:00', '能飞行的区域已经完成，等待天气好转再进场飞行；');
INSERT INTO `cmc_project_progress` VALUES (675, '1648881414674579458', '90', '2021-12-06 00:00:00', '完成困难处机载激光飞行；');
INSERT INTO `cmc_project_progress` VALUES (676, '1648881414674579458', '100', '2021-12-17 00:00:00', '将资用成果图交付甲方。');
INSERT INTO `cmc_project_progress` VALUES (677, '1648881414657802242', '50', '2021-10-23 00:00:00', '外业结束，开始编辑资料');
INSERT INTO `cmc_project_progress` VALUES (678, '1648881414657802242', '90', '2021-11-03 00:00:00', '提交测绘产品');
INSERT INTO `cmc_project_progress` VALUES (679, '1648881414657802242', '100', '2021-11-05 00:00:00', '提交报告');
INSERT INTO `cmc_project_progress` VALUES (680, '1648881414641025025', '10', '2021-10-15 00:00:00', '完成派镇区域1:1000地形图外业调绘工作；');
INSERT INTO `cmc_project_progress` VALUES (681, '1648881414641025025', '40', '2021-11-16 00:00:00', '完成尼洋河上游段上午允许飞行的区域飞行任务；');
INSERT INTO `cmc_project_progress` VALUES (682, '1648881414641025025', '60', '2022-04-03 00:00:00', '完成雅鲁藏布江直白以上段所有外业调绘工作；');
INSERT INTO `cmc_project_progress` VALUES (683, '1648881414641025025', '100', '2023-01-05 00:00:00', '完成全部外业工作。人员撤场。');
INSERT INTO `cmc_project_progress` VALUES (684, '1648881414624247809', '90', '2021-10-31 00:00:00', '1:2000地形图已全部完成');
INSERT INTO `cmc_project_progress` VALUES (685, '1648881414624247809', '100', '2023-08-20 00:00:00', '资料归档');
INSERT INTO `cmc_project_progress` VALUES (686, '1648881414603276289', '100', '2021-12-17 00:00:00', '报告出版提交');
INSERT INTO `cmc_project_progress` VALUES (687, '1648881414582304770', '100', '2021-10-31 00:00:00', '已按工期要求时间完成');
INSERT INTO `cmc_project_progress` VALUES (688, '1648881414565527553', '100', NULL, NULL);
INSERT INTO `cmc_project_progress` VALUES (689, '1648881414544556034', '60', '2023-12-31 00:00:00', '按照业主要求的进度执行。');
INSERT INTO `cmc_project_progress` VALUES (690, '1648881414527778817', '40', '2021-10-27 00:00:00', '完成控制点埋设工作。');
INSERT INTO `cmc_project_progress` VALUES (691, '1648881414527778817', '80', '2021-11-16 00:00:00', '完成GNSS测量工作，水准测量已快完成。');
INSERT INTO `cmc_project_progress` VALUES (692, '1648881414527778817', '100', '2021-11-19 00:00:00', '完成全部外业工作，外业人员返回成都。');
INSERT INTO `cmc_project_progress` VALUES (693, '1648881414511001602', '0', '2021-10-18 00:00:00', '人员进场（李旭杨永恒）');
INSERT INTO `cmc_project_progress` VALUES (694, '1648881414511001602', '50', '2021-10-22 00:00:00', '数据返回，外业完成，返回路途中，计划10.22到达成都');
INSERT INTO `cmc_project_progress` VALUES (695, '1648881414511001602', '70', '2021-10-26 00:00:00', '地形图测图中，DOM已完成，三维模型处理中。');
INSERT INTO `cmc_project_progress` VALUES (696, '1648881414511001602', '100', '2021-10-22 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (697, '1648881414490030081', '100', '2021-10-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (698, '1648881414473252866', '100', '2021-10-26 00:00:00', '实测1：500地形图');
INSERT INTO `cmc_project_progress` VALUES (699, '1648881414456475649', '100', '2021-10-28 00:00:00', '已提交');
INSERT INTO `cmc_project_progress` VALUES (700, '1648881414431309825', '80', '2021-11-23 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (701, '1648881414431309825', '100', '2021-11-25 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (702, '1648881414410338305', '70', '2021-11-28 00:00:00', '外业调绘完成，内业成图完成70%');
INSERT INTO `cmc_project_progress` VALUES (703, '1648881414410338305', '90', '2021-12-10 00:00:00', '资用图提交完成');
INSERT INTO `cmc_project_progress` VALUES (704, '1648881414410338305', '100', '2021-12-31 00:00:00', '提交所有成果资料');
INSERT INTO `cmc_project_progress` VALUES (705, '1648881414389366785', '20', '2021-11-11 00:00:00', '5000范围像控、控制点选埋');
INSERT INTO `cmc_project_progress` VALUES (706, '1648881414389366785', '40', '2021-11-28 00:00:00', '完成GNSS测量、开展高程联测');
INSERT INTO `cmc_project_progress` VALUES (707, '1648881414389366785', '60', '2021-12-07 00:00:00', '完成外业工作，内业编图同步进行');
INSERT INTO `cmc_project_progress` VALUES (708, '1648881414389366785', '100', '2021-12-10 00:00:00', '提交地形图等相关成果资料');
INSERT INTO `cmc_project_progress` VALUES (709, '1648881414372589569', '100', '2021-12-30 00:00:00', '无人机飞行');
INSERT INTO `cmc_project_progress` VALUES (710, '1648881414372589569', '100', '2021-12-30 00:00:00', '水下测量');
INSERT INTO `cmc_project_progress` VALUES (711, '1648881414372589569', '100', '2021-12-30 00:00:00', '调绘');
INSERT INTO `cmc_project_progress` VALUES (712, '1648881414355812353', '100', NULL, NULL);
INSERT INTO `cmc_project_progress` VALUES (713, '1648881414334840833', '40', '2021-11-15 00:00:00', '完成水下地形测量');
INSERT INTO `cmc_project_progress` VALUES (714, '1648881414334840833', '80', '2021-11-17 00:00:00', '完成地形外业测量');
INSERT INTO `cmc_project_progress` VALUES (715, '1648881414334840833', '100', '2021-11-19 00:00:00', '完成成果资料提交');
INSERT INTO `cmc_project_progress` VALUES (716, '1648881414313869314', '50', '2021-11-25 00:00:00', '外业结束，进入内业生产流程');
INSERT INTO `cmc_project_progress` VALUES (717, '1648881414313869314', '100', '2021-12-03 00:00:00', '提交地形图等成果资料');
INSERT INTO `cmc_project_progress` VALUES (718, '1648881414292897793', '10', '2021-11-29 00:00:00', '外业进场，开始像控点布设工作；');
INSERT INTO `cmc_project_progress` VALUES (719, '1648881414292897793', '80', '2021-12-02 00:00:00', '完成无人机飞行；');
INSERT INTO `cmc_project_progress` VALUES (720, '1648881414292897793', '100', '2021-12-03 00:00:00', '完成全部外业工作，返回成都。');
INSERT INTO `cmc_project_progress` VALUES (721, '1648881414276120578', '20', '2021-11-27 00:00:00', '外业进场，布设像控点；');
INSERT INTO `cmc_project_progress` VALUES (722, '1648881414276120578', '70', '2021-12-28 00:00:00', '完成像控点、检查点测量；');
INSERT INTO `cmc_project_progress` VALUES (723, '1648881414276120578', '100', '2021-11-29 00:00:00', '完成外业工作，外业离场。');
INSERT INTO `cmc_project_progress` VALUES (724, '1648881414259343361', '10', '2021-11-16 00:00:00', '外业进场，开始像控点布设工作；');
INSERT INTO `cmc_project_progress` VALUES (725, '1648881414259343361', '90', '2021-11-26 00:00:00', '完成无人机飞行数据采集，并进行了数据检查；');
INSERT INTO `cmc_project_progress` VALUES (726, '1648881414259343361', '100', '2021-11-27 00:00:00', '外业离场。');
INSERT INTO `cmc_project_progress` VALUES (727, '1648881414234177537', '40', '2021-11-27 00:00:00', '航飞和外业调绘检查点、断面测量等完成');
INSERT INTO `cmc_project_progress` VALUES (728, '1648881414234177537', '40', '2021-12-01 00:00:00', '提交资用图');
INSERT INTO `cmc_project_progress` VALUES (729, '1648881414234177537', '100', '2021-12-13 00:00:00', '提交所有成果资料');
INSERT INTO `cmc_project_progress` VALUES (730, '1648881414213206018', '50', '2021-11-25 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (731, '1648881414213206018', '90', '2021-12-02 00:00:00', '提交资用成果');
INSERT INTO `cmc_project_progress` VALUES (732, '1648881414213206018', '100', '2021-12-04 00:00:00', '归档完成');
INSERT INTO `cmc_project_progress` VALUES (733, '1648881414192234498', '40', '2021-11-28 00:00:00', '外业航飞、调绘完成');
INSERT INTO `cmc_project_progress` VALUES (734, '1648881414192234498', '50', '2021-11-30 00:00:00', '内业测绘完成2平方公里');
INSERT INTO `cmc_project_progress` VALUES (735, '1648881414192234498', '80', '2021-12-08 00:00:00', '二查修改');
INSERT INTO `cmc_project_progress` VALUES (736, '1648881414192234498', '90', '2021-12-09 00:00:00', '提交资用成果');
INSERT INTO `cmc_project_progress` VALUES (737, '1648881414192234498', '100', '2021-12-15 00:00:00', '提交正式成果');
INSERT INTO `cmc_project_progress` VALUES (738, '1648881414192234498', '100', '2021-12-31 00:00:00', '提交新增范围的补测成果');
INSERT INTO `cmc_project_progress` VALUES (739, '1648881414175457281', '60', '2021-11-30 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (740, '1648881414175457281', '100', '2021-12-28 00:00:00', '一共完成约237个点的环绕飞行');
INSERT INTO `cmc_project_progress` VALUES (741, '1648881414154485761', '30', '2021-12-03 00:00:00', '完成JW、XR吊桥施工区地形图外业数据采集');
INSERT INTO `cmc_project_progress` VALUES (742, '1648881414154485761', '50', '2021-12-05 00:00:00', '完成外业工作，开始内业制图及数据整理');
INSERT INTO `cmc_project_progress` VALUES (743, '1648881414154485761', '100', '2021-12-10 00:00:00', '提交正式资料');
INSERT INTO `cmc_project_progress` VALUES (744, '1648881414137708545', '60', '2021-11-28 00:00:00', '外业结束');
INSERT INTO `cmc_project_progress` VALUES (745, '1648881414137708545', '90', '2021-12-02 00:00:00', '航测结束、一查二查交资用');
INSERT INTO `cmc_project_progress` VALUES (746, '1648881414137708545', '100', '2021-12-13 00:00:00', '交正式资料、项目归档');
INSERT INTO `cmc_project_progress` VALUES (747, '1648881414116737025', '100', '2021-12-15 00:00:00', '资料已经提交归档，全部完成。');
INSERT INTO `cmc_project_progress` VALUES (748, '1648881414095765505', '60', '2022-01-12 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (749, '1648881414095765505', '100', '2022-09-15 00:00:00', '资料已提交电厂归档');
INSERT INTO `cmc_project_progress` VALUES (750, '1648881414078988290', '100', '2021-12-31 00:00:00', '按照甲方要求完成技术服务工作');
INSERT INTO `cmc_project_progress` VALUES (751, '1648881414066405378', '50', '2021-12-28 00:00:00', '地面激光扫描完成50％');
INSERT INTO `cmc_project_progress` VALUES (752, '1648881414066405378', '100', '2022-01-05 00:00:00', '地面激光扫描及房屋立面图制作全部完成');
INSERT INTO `cmc_project_progress` VALUES (753, '1648881414066405377', '80', '2022-01-01 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (754, '1648881414066405377', '100', '2022-02-16 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (755, '1648881414049628162', '50', '2020-01-20 00:00:00', '完成I期测量工作并提交相关资料');
INSERT INTO `cmc_project_progress` VALUES (756, '1648881414049628162', '100', '2021-01-05 00:00:00', '完成II期测量工作并提交相关资料');
INSERT INTO `cmc_project_progress` VALUES (757, '1648881414037045250', '60', '2021-12-22 00:00:00', '外业工作结束，开始内业成图');
INSERT INTO `cmc_project_progress` VALUES (758, '1648881414037045250', '100', '2021-12-28 00:00:00', '提交测绘产品');
INSERT INTO `cmc_project_progress` VALUES (759, '1648881414020268033', '20', '2021-12-14 00:00:00', '外业进场，现场查勘开始配合测量');
INSERT INTO `cmc_project_progress` VALUES (760, '1648881414020268033', '100', '2021-12-17 00:00:00', '完成共三处影响区配合测量工作，外业返回成都，提交成果资料给甲方。');
INSERT INTO `cmc_project_progress` VALUES (761, '1648881414003490818', '40', '2022-01-09 00:00:00', '完成所有外业飞行和数据采集');
INSERT INTO `cmc_project_progress` VALUES (762, '1648881414003490818', '100', '2022-01-27 00:00:00', '按照业主要求提交资料');
INSERT INTO `cmc_project_progress` VALUES (763, '1648881413986713601', '100', '2022-03-15 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (764, '1648881413965742081', '40', '2022-03-15 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (765, '1648881413965742081', '100', '2023-02-01 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (766, '1648881413948964865', '100', '2022-01-06 00:00:00', '水下地形测量');
INSERT INTO `cmc_project_progress` VALUES (767, '1648881413948964865', '100', '2022-01-06 00:00:00', '无人机飞行');
INSERT INTO `cmc_project_progress` VALUES (768, '1648881413927993346', '60', '2022-01-05 00:00:00', '外业测量完成');
INSERT INTO `cmc_project_progress` VALUES (769, '1648881413927993346', '100', '2022-01-08 00:00:00', '内业数据处理完成');
INSERT INTO `cmc_project_progress` VALUES (770, '1648881413911216130', '100', '2022-03-03 00:00:00', 'D级GNSS控制点');
INSERT INTO `cmc_project_progress` VALUES (771, '1648881413911216130', '100', '2022-03-03 00:00:00', 'E级GNSS控制');
INSERT INTO `cmc_project_progress` VALUES (772, '1648881413911216130', '100', '2022-03-13 00:00:00', '洪水位点测量');
INSERT INTO `cmc_project_progress` VALUES (773, '1648881413911216130', '100', '2022-03-05 00:00:00', '四等水准测量');
INSERT INTO `cmc_project_progress` VALUES (774, '1648881413911216130', '100', '2022-03-14 00:00:00', '水下地形测量');
INSERT INTO `cmc_project_progress` VALUES (775, '1648881413911216130', '100', '2022-03-14 00:00:00', '1：2000航道调绘');
INSERT INTO `cmc_project_progress` VALUES (776, '1648881413894438914', '80', '2022-01-21 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (777, '1648881413894438914', '100', '2022-06-07 00:00:00', '已归档');
INSERT INTO `cmc_project_progress` VALUES (778, '1648881413877661698', '50', '2022-02-21 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (779, '1648881413877661698', '80', '2022-03-07 00:00:00', '内页完成');
INSERT INTO `cmc_project_progress` VALUES (780, '1648881413877661698', '100', '2023-04-01 00:00:00', '归档完成');
INSERT INTO `cmc_project_progress` VALUES (781, '1648881413860884481', '100', '2022-12-31 00:00:00', '完成合同全部内容');
INSERT INTO `cmc_project_progress` VALUES (782, '1648881413844107265', '10', '2022-01-31 00:00:00', '合同内监测部位常规观测、1月监测月报编制');
INSERT INTO `cmc_project_progress` VALUES (783, '1648881413844107265', '20', '2022-02-28 00:00:00', '合同内监测部位常规观测、2月监测月报编制');
INSERT INTO `cmc_project_progress` VALUES (784, '1648881413844107265', '28', '2022-03-31 00:00:00', '合同内监测部位常规观测、3月监测月报编制');
INSERT INTO `cmc_project_progress` VALUES (785, '1648881413844107265', '34', '2022-04-20 00:00:00', '合同内监测部位常规观测、4月监测月报编制');
INSERT INTO `cmc_project_progress` VALUES (786, '1648881413844107265', '42', '2022-05-20 00:00:00', '合同内监测部位常规观测、5月监测月报编制');
INSERT INTO `cmc_project_progress` VALUES (787, '1648881413844107265', '50', '2022-06-20 00:00:00', '合同内监测部位常规观测、6月监测月报编制');
INSERT INTO `cmc_project_progress` VALUES (788, '1648881413844107265', '58', '2022-07-20 00:00:00', '合同内监测部位常规观测、7月监测月报编制');
INSERT INTO `cmc_project_progress` VALUES (789, '1648881413844107265', '66', '2022-08-20 00:00:00', '合同内监测部位常规观测、8月监测月报编制');
INSERT INTO `cmc_project_progress` VALUES (790, '1648881413844107265', '74', '2022-09-20 00:00:00', '合同内监测部位常规观测、9月监测月报编制');
INSERT INTO `cmc_project_progress` VALUES (791, '1648881413844107265', '82', '2022-10-20 00:00:00', '合同内监测部位常规观测、10月监测月报编制');
INSERT INTO `cmc_project_progress` VALUES (792, '1648881413844107265', '90', '2022-11-20 00:00:00', '合同内监测部位观测、监测控制网复测、11月监测月报编制');
INSERT INTO `cmc_project_progress` VALUES (793, '1648881413844107265', '100', '2022-12-31 00:00:00', '12月监测月报编制、年度控制网资料整编、年报整编');
INSERT INTO `cmc_project_progress` VALUES (794, '1648881413827330049', '40', '2022-04-07 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (795, '1648881413827330049', '60', '2022-07-13 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (796, '1648881413827330049', '100', '2022-12-30 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (797, '1648881413806358530', '100', '2022-12-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (798, '1648881413785387010', '100', '2022-01-21 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (799, '1648881413768609794', '100', '2022-12-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (800, '1648881413751832578', '30', '2022-03-27 00:00:00', '现场情况了解清楚，现场找到界桩77根');
INSERT INTO `cmc_project_progress` VALUES (801, '1648881413751832578', '90', '2022-04-07 00:00:00', '成果资料整改');
INSERT INTO `cmc_project_progress` VALUES (802, '1648881413751832578', '100', '2022-04-15 00:00:00', '成果移交');
INSERT INTO `cmc_project_progress` VALUES (803, '1648881413730861058', '40', '2022-02-28 00:00:00', '年前完成外业初步采集工作');
INSERT INTO `cmc_project_progress` VALUES (804, '1648881413730861058', '60', '2022-02-15 00:00:00', '年后主要完成数据处理和内业平面采集');
INSERT INTO `cmc_project_progress` VALUES (805, '1648881413730861058', '100', '2022-03-15 00:00:00', '完成内业平面采集和资料汇交');
INSERT INTO `cmc_project_progress` VALUES (806, '1648881413709889537', '30', '2022-02-16 00:00:00', '五等点、像控点及检查点');
INSERT INTO `cmc_project_progress` VALUES (807, '1648881413709889537', '50', '2022-02-21 00:00:00', '航飞、调绘、四等三角高程测量');
INSERT INTO `cmc_project_progress` VALUES (808, '1648881413709889537', '80', '2022-02-25 00:00:00', '提交资用成果');
INSERT INTO `cmc_project_progress` VALUES (809, '1648881413709889537', '100', '2022-04-09 00:00:00', '提交正式成果');
INSERT INTO `cmc_project_progress` VALUES (810, '1648881413684723714', '30', '2022-02-20 00:00:00', '完成航飞、像控点及检查点的外业数据采集工作');
INSERT INTO `cmc_project_progress` VALUES (811, '1648881413684723714', '80', '2022-03-05 00:00:00', '完成外业调绘，结束外业工作');
INSERT INTO `cmc_project_progress` VALUES (812, '1648881413684723714', '100', '2022-03-08 00:00:00', '提交资用图');
INSERT INTO `cmc_project_progress` VALUES (813, '1648881413667946498', '60', '2022-02-26 00:00:00', '外业结束');
INSERT INTO `cmc_project_progress` VALUES (814, '1648881413667946498', '100', '2022-04-09 00:00:00', '提交资料');
INSERT INTO `cmc_project_progress` VALUES (815, '1648881413651169282', '90', '2022-03-24 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (816, '1648881413651169282', '100', '2022-04-09 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (817, '1648881413584060417', '30', '2022-03-04 00:00:00', '完成像控点测量、无人机飞行；');
INSERT INTO `cmc_project_progress` VALUES (818, '1648881413584060417', '70', '2022-03-06 00:00:00', '完成水边线测量、水下地形任务；');
INSERT INTO `cmc_project_progress` VALUES (819, '1648881413584060417', '100', '2022-03-07 00:00:00', '完成全部外业工作，外业离场。');
INSERT INTO `cmc_project_progress` VALUES (820, '1648881413567283202', '100', '2022-03-15 00:00:00', '已完成外业全部工作，资料已提交。');
INSERT INTO `cmc_project_progress` VALUES (821, '1648881413550505985', '100', '2022-04-15 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (822, '1648881413529534465', '50', '2022-03-11 00:00:00', '外业作业完成');
INSERT INTO `cmc_project_progress` VALUES (823, '1648881413529534465', '90', '2022-03-22 00:00:00', '资用成果提交');
INSERT INTO `cmc_project_progress` VALUES (824, '1648881413529534465', '100', '2022-03-29 00:00:00', '成果检查完成');
INSERT INTO `cmc_project_progress` VALUES (825, '1648881413512757249', '100', '2022-04-09 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (826, '1648881413500174338', '20', '2022-03-18 00:00:00', '激光采集、外业调绘');
INSERT INTO `cmc_project_progress` VALUES (827, '1648881413500174338', '50', '2022-03-21 00:00:00', 'DOM制作完成');
INSERT INTO `cmc_project_progress` VALUES (828, '1648881413500174338', '70', '2022-03-23 00:00:00', '提交永善县范围内资用图');
INSERT INTO `cmc_project_progress` VALUES (829, '1648881413500174338', '90', '2022-03-25 00:00:00', '提交全范围地形图，编制新范围地形图');
INSERT INTO `cmc_project_progress` VALUES (830, '1648881413500174338', '100', '2022-03-30 00:00:00', '完成全测区地形图');
INSERT INTO `cmc_project_progress` VALUES (831, '1648881413483397121', '20', '2022-04-02 00:00:00', '完成测区踏勘及力丘河水下地形外业数据采集工作；');
INSERT INTO `cmc_project_progress` VALUES (832, '1648881413483397121', '40', '2022-04-15 00:00:00', '完成无人机飞行及部分断面测绘，内业开始地形图生产；');
INSERT INTO `cmc_project_progress` VALUES (833, '1648881413483397121', '80', '2022-04-20 00:00:00', '结束外业工作，开始资料整编；');
INSERT INTO `cmc_project_progress` VALUES (834, '1648881413483397121', '100', '2022-04-25 00:00:00', '项目结束，提交成果资料。');
INSERT INTO `cmc_project_progress` VALUES (835, '1648881413462425602', '50', '2022-03-29 00:00:00', '外业采集结束并返回成都');
INSERT INTO `cmc_project_progress` VALUES (836, '1648881413462425602', '100', '2022-03-31 00:00:00', '工程量分析报告已提交给业主');
INSERT INTO `cmc_project_progress` VALUES (837, '1648881413441454081', '30', '2022-03-29 00:00:00', '航飞结束');
INSERT INTO `cmc_project_progress` VALUES (838, '1648881413441454081', '50', '2022-05-30 00:00:00', '孟获城项目工作结束');
INSERT INTO `cmc_project_progress` VALUES (839, '1648881413441454081', '100', '2022-04-03 00:00:00', '大岗山项目及调绘工作结束');
INSERT INTO `cmc_project_progress` VALUES (840, '1648881413428871170', '100', '2022-04-15 00:00:00', '杨振主任带队现场修补测工作结束');
INSERT INTO `cmc_project_progress` VALUES (841, '1648881413412093953', '30', '2022-04-27 00:00:00', '完成测区飞行作业；');
INSERT INTO `cmc_project_progress` VALUES (842, '1648881413412093953', '40', '2022-05-05 00:00:00', '完成测区各类比例尺内业成图，提交资用成果；');
INSERT INTO `cmc_project_progress` VALUES (843, '1648881413412093953', '50', '2022-05-22 00:00:00', '完成水下地形点数据采集，加紧外业调绘工作开展；');
INSERT INTO `cmc_project_progress` VALUES (844, '1648881413412093953', '80', '2022-07-06 00:00:00', '完成移民安置点以外全部外业工作');
INSERT INTO `cmc_project_progress` VALUES (845, '1648881413412093953', '100', '2023-05-15 00:00:00', '提交全部正式产品');
INSERT INTO `cmc_project_progress` VALUES (846, '1648881413395316737', '10', '2022-01-31 00:00:00', '沉降观测点完成埋设，首期基准值和首期监测报告完成');
INSERT INTO `cmc_project_progress` VALUES (847, '1648881413395316737', '18', '2022-02-28 00:00:00', '第2期观测和监测报告完成');
INSERT INTO `cmc_project_progress` VALUES (848, '1648881413395316737', '26', '2022-03-31 00:00:00', '第3期观测和监测报告完成');
INSERT INTO `cmc_project_progress` VALUES (849, '1648881413395316737', '34', '2022-04-20 00:00:00', '第4期观测和监测报告完成');
INSERT INTO `cmc_project_progress` VALUES (850, '1648881413395316737', '42', '2022-05-20 00:00:00', '第5期观测和监测报告完成');
INSERT INTO `cmc_project_progress` VALUES (851, '1648881413395316737', '50', '2022-06-20 00:00:00', '第6期观测和监测报告完成');
INSERT INTO `cmc_project_progress` VALUES (852, '1648881413395316737', '58', '2022-07-20 00:00:00', '第7期观测和监测报告完成');
INSERT INTO `cmc_project_progress` VALUES (853, '1648881413395316737', '66', '2022-08-15 00:00:00', '第8期观测和监测报告完成');
INSERT INTO `cmc_project_progress` VALUES (854, '1648881413395316737', '74', '2022-09-17 00:00:00', '第9期观测和监测报告完成');
INSERT INTO `cmc_project_progress` VALUES (855, '1648881413395316737', '82', '2022-10-21 00:00:00', '第10期观测和监测报告完成');
INSERT INTO `cmc_project_progress` VALUES (856, '1648881413395316737', '90', '2022-11-20 00:00:00', '第11期观测和监测报告完成');
INSERT INTO `cmc_project_progress` VALUES (857, '1648881413395316737', '100', '2022-12-18 00:00:00', '第12期观测和监测报告完成，项目合同履约完成');
INSERT INTO `cmc_project_progress` VALUES (858, '1648881413378539521', '50', '2022-04-05 00:00:00', '外业航飞完成');
INSERT INTO `cmc_project_progress` VALUES (859, '1648881413378539521', '100', '2022-04-13 00:00:00', '内业完成，正式成果提交');
INSERT INTO `cmc_project_progress` VALUES (860, '1648881413361762305', '100', '2022-12-10 00:00:00', '国家核查通过');
INSERT INTO `cmc_project_progress` VALUES (861, '1648881413344985090', '25', '2022-05-13 00:00:00', '合同内直孔电站及羊湖电站常规监测，地质巡视，资料整编');
INSERT INTO `cmc_project_progress` VALUES (862, '1648881413344985090', '40', '2022-06-23 00:00:00', '合同内直孔电站及羊湖电站常规监测，地质巡视，资料整编');
INSERT INTO `cmc_project_progress` VALUES (863, '1648881413344985090', '80', '2022-12-08 00:00:00', '合同内直孔电站及羊湖电站常规监测，自动化监测系统人工比测');
INSERT INTO `cmc_project_progress` VALUES (864, '1648881413344985090', '100', '2023-03-27 00:00:00', '资料出版并提交至拉萨发电公司');
INSERT INTO `cmc_project_progress` VALUES (865, '1648881413328207874', '20', '2022-05-24 00:00:00', '土建结束');
INSERT INTO `cmc_project_progress` VALUES (866, '1648881413328207874', '50', '2022-12-26 00:00:00', '水准监测控制网已观测结束');
INSERT INTO `cmc_project_progress` VALUES (867, '1648881413328207874', '80', '2023-01-10 00:00:00', '平面监测控制网已观测结束');
INSERT INTO `cmc_project_progress` VALUES (868, '1648881413328207874', '90', '2023-02-20 00:00:00', '资料整编初稿已完成');
INSERT INTO `cmc_project_progress` VALUES (869, '1648881413328207874', '100', '2023-03-27 00:00:00', '资料出版并提交至西藏拉萨发电公司');
INSERT INTO `cmc_project_progress` VALUES (870, '1648881413311430658', '10', '2022-04-04 00:00:00', '测区踏勘和起降场选择');
INSERT INTO `cmc_project_progress` VALUES (871, '1648881413311430658', '20', '2022-04-05 00:00:00', '无人机航飞');
INSERT INTO `cmc_project_progress` VALUES (872, '1648881413311430658', '30', '2022-04-06 00:00:00', '无人机航飞及检查点');
INSERT INTO `cmc_project_progress` VALUES (873, '1648881413311430658', '40', '2022-04-07 00:00:00', '无人机航飞');
INSERT INTO `cmc_project_progress` VALUES (874, '1648881413311430658', '60', '2022-04-08 00:00:00', '无人机航飞');
INSERT INTO `cmc_project_progress` VALUES (875, '1648881413311430658', '80', '2022-04-11 00:00:00', '外业航飞任务完成');
INSERT INTO `cmc_project_progress` VALUES (876, '1648881413311430658', '100', '2022-04-12 00:00:00', '外业工作结束');
INSERT INTO `cmc_project_progress` VALUES (877, '1648881413294653441', '20', '2022-04-04 00:00:00', '白河牧场2#地形图');
INSERT INTO `cmc_project_progress` VALUES (878, '1648881413294653441', '80', '2022-04-13 00:00:00', '外业作业完成');
INSERT INTO `cmc_project_progress` VALUES (879, '1648881413294653441', '100', '2022-04-18 00:00:00', '成果移交至甲方');
INSERT INTO `cmc_project_progress` VALUES (880, '1648881413277876226', '20', '2022-04-15 00:00:00', '部分航飞及控制点测设');
INSERT INTO `cmc_project_progress` VALUES (881, '1648881413277876226', '80', '2022-04-26 00:00:00', '航飞结束，即将开展调绘工作');
INSERT INTO `cmc_project_progress` VALUES (882, '1648881413277876226', '100', '2022-04-28 00:00:00', '全部工作结束返回成都');
INSERT INTO `cmc_project_progress` VALUES (883, '1648881413265293314', '60', '2022-04-20 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (884, '1648881413265293314', '90', '2022-04-23 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (885, '1648881413265293314', '100', '2022-06-25 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (886, '1648881413244321794', '20', '2022-04-22 00:00:00', '完成飞行');
INSERT INTO `cmc_project_progress` VALUES (887, '1648881413244321794', '80', '2022-05-07 00:00:00', '完成外业工作');
INSERT INTO `cmc_project_progress` VALUES (888, '1648881413244321794', '100', '2022-05-17 00:00:00', '提交正式成果');
INSERT INTO `cmc_project_progress` VALUES (889, '1648881413227544578', '40', '2022-04-26 00:00:00', '外业工作完成');
INSERT INTO `cmc_project_progress` VALUES (890, '1648881413227544578', '100', '2022-05-10 00:00:00', '内业完成，正式成果提交');
INSERT INTO `cmc_project_progress` VALUES (891, '1648881413210767362', '60', '2022-04-22 00:00:00', '外业实测工作完成');
INSERT INTO `cmc_project_progress` VALUES (892, '1648881413210767362', '100', '2022-04-25 00:00:00', '内业正式成果提交');
INSERT INTO `cmc_project_progress` VALUES (893, '1648881413193990145', '100', '2022-05-13 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (894, '1648881413181407233', '30', '2022-05-21 00:00:00', '采集完成 ');
INSERT INTO `cmc_project_progress` VALUES (895, '1648881413181407233', '50', '2022-05-25 00:00:00', '外业控制、调绘完成');
INSERT INTO `cmc_project_progress` VALUES (896, '1648881413181407233', '80', '2022-05-26 00:00:00', '点云分类，数字化完成');
INSERT INTO `cmc_project_progress` VALUES (897, '1648881413181407233', '100', '2022-06-06 00:00:00', '完成地形图、DOM、三维地形面');
INSERT INTO `cmc_project_progress` VALUES (898, '1648881413164630018', '20', '2022-05-17 00:00:00', '完成航飞、像控点及控制点测量');
INSERT INTO `cmc_project_progress` VALUES (899, '1648881413164630018', '60', '2022-05-19 00:00:00', '完成调绘工作');
INSERT INTO `cmc_project_progress` VALUES (900, '1648881413164630018', '90', '2022-05-26 00:00:00', '完成外业工作');
INSERT INTO `cmc_project_progress` VALUES (901, '1648881413164630018', '100', '2022-06-01 00:00:00', '提交正式图');
INSERT INTO `cmc_project_progress` VALUES (902, '1648881413147852802', '100', '2022-06-08 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (903, '1648881413131075586', '20', '2022-05-30 00:00:00', '配合业主方完成了相关资料，到达直孔测区；');
INSERT INTO `cmc_project_progress` VALUES (904, '1648881413131075586', '50', '2022-06-15 00:00:00', '完成了岸上控制测量、岸上地形点测量等工作；');
INSERT INTO `cmc_project_progress` VALUES (905, '1648881413131075586', '80', '2022-07-04 00:00:00', '完成全部外业工作；');
INSERT INTO `cmc_project_progress` VALUES (906, '1648881413131075586', '100', '2022-07-18 00:00:00', '将资用成果资料交付了甲方。');
INSERT INTO `cmc_project_progress` VALUES (907, '1648881413114298369', '50', '2022-05-21 00:00:00', '完成现场测量工作');
INSERT INTO `cmc_project_progress` VALUES (908, '1648881413114298369', '90', '2022-05-26 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (909, '1648881413114298369', '100', '2022-05-27 00:00:00', '正式成果提交');
INSERT INTO `cmc_project_progress` VALUES (910, '1648881413093326850', '40', '2022-05-25 00:00:00', '控制采集、水边测量');
INSERT INTO `cmc_project_progress` VALUES (911, '1648881413093326850', '80', '2022-05-26 00:00:00', '水下测量');
INSERT INTO `cmc_project_progress` VALUES (912, '1648881413093326850', '100', '2022-05-31 00:00:00', '内业处理完成');
INSERT INTO `cmc_project_progress` VALUES (913, '1648881413072355329', '100', '2022-12-30 00:00:00', '委外项目，按合同要求已完成');
INSERT INTO `cmc_project_progress` VALUES (914, '1648881413051383810', '50', '2022-05-28 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (915, '1648881413051383810', '80', '2022-05-30 00:00:00', '地形图提交');
INSERT INTO `cmc_project_progress` VALUES (916, '1648881413051383810', '100', '2022-06-08 00:00:00', '归档完成');
INSERT INTO `cmc_project_progress` VALUES (917, '1648881413030412290', '100', '2022-05-31 00:00:00', '完成');
INSERT INTO `cmc_project_progress` VALUES (918, '1648881413009440769', '100', '2022-06-01 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (919, '1648881412984274945', '30', '2022-03-11 00:00:00', '项目进场开展像控点测量工作；');
INSERT INTO `cmc_project_progress` VALUES (920, '1648881412984274945', '80', '2022-03-14 00:00:00', '完成无人机飞行等全部外业工作、外业返回成都；');
INSERT INTO `cmc_project_progress` VALUES (921, '1648881412984274945', '100', '2022-03-19 00:00:00', '完成全部内业工作，将成果资料交付了甲方。');
INSERT INTO `cmc_project_progress` VALUES (922, '1648881412963303425', '90', '2022-10-20 00:00:00', '完成外业工作');
INSERT INTO `cmc_project_progress` VALUES (923, '1648881412963303425', '100', '2022-10-31 00:00:00', '完成工作资料提交');
INSERT INTO `cmc_project_progress` VALUES (924, '1648881412963303425', '100', '2024-03-13 00:00:00', '完成补测工作，返回至成都');
INSERT INTO `cmc_project_progress` VALUES (925, '1648881412946526209', '40', '2022-06-07 00:00:00', '完成航飞工作');
INSERT INTO `cmc_project_progress` VALUES (926, '1648881412946526209', '80', '2022-06-12 00:00:00', '完成全部外业工作');
INSERT INTO `cmc_project_progress` VALUES (927, '1648881412946526209', '100', '2022-06-15 00:00:00', '提交测绘产品成果资料');
INSERT INTO `cmc_project_progress` VALUES (928, '1648881412929748993', '100', '2022-07-05 00:00:00', '资料已归档');
INSERT INTO `cmc_project_progress` VALUES (929, '1648881412912971777', '70', '2022-06-25 00:00:00', '外业工作完成、资料提交50%');
INSERT INTO `cmc_project_progress` VALUES (930, '1648881412912971777', '100', '2022-07-06 00:00:00', '项目成果已提交业主');
INSERT INTO `cmc_project_progress` VALUES (931, '1648881412892000257', '40', '2022-06-25 00:00:00', '外业工作完成');
INSERT INTO `cmc_project_progress` VALUES (932, '1648881412892000257', '80', '2022-06-30 00:00:00', '资用成果提交');
INSERT INTO `cmc_project_progress` VALUES (933, '1648881412892000257', '100', '2022-07-20 00:00:00', '提交正式成果');
INSERT INTO `cmc_project_progress` VALUES (934, '1648881412875223041', '20', '2022-06-13 00:00:00', '完成激光采集及控制测量');
INSERT INTO `cmc_project_progress` VALUES (935, '1648881412875223041', '70', '2022-06-18 00:00:00', '完成点云分类，内业数字化、外业调绘');
INSERT INTO `cmc_project_progress` VALUES (936, '1648881412875223041', '90', '2022-06-20 00:00:00', '地形图交资用');
INSERT INTO `cmc_project_progress` VALUES (937, '1648881412875223041', '100', '2022-06-27 00:00:00', '完成地形图成果、三维地形面成果');
INSERT INTO `cmc_project_progress` VALUES (938, '1648881412845862913', '90', '2022-07-01 00:00:00', '集电线路和奔戈已完成。南桠现场天气不好，飞行条件差');
INSERT INTO `cmc_project_progress` VALUES (939, '1648881412845862913', '100', '2022-07-08 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (940, '1648881412829085697', '100', '2022-06-27 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (941, '1648881412812308481', '100', '2022-06-27 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (942, '1648881412795531265', '100', '2022-06-30 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (943, '1648881412774559745', '10', '2022-06-27 00:00:00', '2017年、2018年控制点查勘、新建网选点');
INSERT INTO `cmc_project_progress` VALUES (944, '1648881412774559745', '50', '2022-07-06 00:00:00', '5个控制网点恢复，三角高程联测');
INSERT INTO `cmc_project_progress` VALUES (945, '1648881412774559745', '80', '2022-07-15 00:00:00', 'GNSS观测和边角网观测全部结束');
INSERT INTO `cmc_project_progress` VALUES (946, '1648881412774559745', '90', '2022-07-18 00:00:00', '原2017年、2018年控制点查找移交工作结束');
INSERT INTO `cmc_project_progress` VALUES (947, '1648881412774559745', '100', '2022-09-30 00:00:00', '完成资料归档并提交');
INSERT INTO `cmc_project_progress` VALUES (948, '1648881412753588225', '20', '2022-06-23 00:00:00', '已完成电建城乡分公司移民配合测绘工作，4块1:500地形图测绘已完成2块影像飞行作业');
INSERT INTO `cmc_project_progress` VALUES (949, '1648881412753588225', '60', '2022-06-25 00:00:00', '外业航飞作业结束，交内业处理');
INSERT INTO `cmc_project_progress` VALUES (950, '1648881412753588225', '100', '2022-06-28 00:00:00', '内业检查，向业主提交资用成果');
INSERT INTO `cmc_project_progress` VALUES (951, '1648881412736811010', '10', '2022-06-22 00:00:00', '1:5000测区范围控制完成');
INSERT INTO `cmc_project_progress` VALUES (952, '1648881412736811010', '30', '2022-07-04 00:00:00', '激光采集完成');
INSERT INTO `cmc_project_progress` VALUES (953, '1648881412736811010', '50', '2022-07-06 00:00:00', '外业调绘完成，1：1000范围资用图完成');
INSERT INTO `cmc_project_progress` VALUES (954, '1648881412736811010', '90', '2022-07-08 00:00:00', '1:1000，1:5000地形图完成');
INSERT INTO `cmc_project_progress` VALUES (955, '1648881412736811010', '100', '2022-07-20 00:00:00', '三维地形面完成');
INSERT INTO `cmc_project_progress` VALUES (956, '1648881412715839489', '100', '2022-06-28 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (957, '1648881412699062273', '40', '2022-07-05 00:00:00', '外业工作完成');
INSERT INTO `cmc_project_progress` VALUES (958, '1648881412699062273', '100', '2022-07-15 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (959, '1648881412682285058', '10', '2022-06-24 00:00:00', '完成了上库1:2000地形图航测及检查点测量工作；');
INSERT INTO `cmc_project_progress` VALUES (960, '1648881412682285058', '20', '2022-06-30 00:00:00', '完成了下库1:2000地形图航测及检查点测量工作；');
INSERT INTO `cmc_project_progress` VALUES (961, '1648881412682285058', '50', '2022-07-04 00:00:00', '完成了卫片成图区域像控点、检查点测量工作；');
INSERT INTO `cmc_project_progress` VALUES (962, '1648881412682285058', '80', '2022-07-12 00:00:00', '完成了全部外业补测工作，外业离场；');
INSERT INTO `cmc_project_progress` VALUES (963, '1648881412682285058', '100', '2022-07-19 00:00:00', '将资用成果资料交付了甲方。');
INSERT INTO `cmc_project_progress` VALUES (964, '1648881412665507842', '60', '2022-07-13 00:00:00', '已完成全部外业工作。');
INSERT INTO `cmc_project_progress` VALUES (965, '1648881412665507842', '100', '2022-07-18 00:00:00', '已交资用成果。');
INSERT INTO `cmc_project_progress` VALUES (966, '1648881412648730625', '50', '2022-07-13 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (967, '1648881412648730625', '100', '2022-07-15 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (968, '1648881412631953410', '40', '2022-07-12 00:00:00', '航飞结束');
INSERT INTO `cmc_project_progress` VALUES (969, '1648881412631953410', '60', '2022-07-13 00:00:00', '断面测量结束');
INSERT INTO `cmc_project_progress` VALUES (970, '1648881412631953410', '90', '2022-07-16 00:00:00', '资用资料提交');
INSERT INTO `cmc_project_progress` VALUES (971, '1648881412631953410', '100', '2022-08-01 00:00:00', '资料提交');
INSERT INTO `cmc_project_progress` VALUES (972, '1648881412610981889', '100', '2022-07-27 00:00:00', '项目结束');
INSERT INTO `cmc_project_progress` VALUES (973, '1648881412594204674', '20', '2022-07-22 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (974, '1648881412594204674', '50', '2022-07-24 00:00:00', '已完成控制测量、检查点测量工作。');
INSERT INTO `cmc_project_progress` VALUES (975, '1648881412594204674', '80', '2022-07-26 00:00:00', '已完成全部测区飞行任务、部分调绘任务。');
INSERT INTO `cmc_project_progress` VALUES (976, '1648881412594204674', '100', '2022-08-08 00:00:00', '已完成全部地形图绘制。');
INSERT INTO `cmc_project_progress` VALUES (977, '1648881412573233153', '20', '2022-07-20 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (978, '1648881412573233153', '80', '2022-07-24 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (979, '1648881412573233153', '100', '2022-07-31 00:00:00', '新增水下未测');
INSERT INTO `cmc_project_progress` VALUES (980, '1648881412552261633', '100', '2022-09-19 00:00:00', '提交成果包含两次选址区的成果');
INSERT INTO `cmc_project_progress` VALUES (981, '1648881412535484418', '100', '2022-10-17 00:00:00', '全部完成');
INSERT INTO `cmc_project_progress` VALUES (982, '1648881412514512898', '10', '2022-07-20 00:00:00', '项目进场；');
INSERT INTO `cmc_project_progress` VALUES (983, '1648881412514512898', '20', '2022-07-24 00:00:00', '完成无人机飞行工作；');
INSERT INTO `cmc_project_progress` VALUES (984, '1648881412514512898', '50', '2022-07-26 00:00:00', '完成控制测量工作；');
INSERT INTO `cmc_project_progress` VALUES (985, '1648881412514512898', '80', '2022-07-28 00:00:00', '完成全部外业调绘工作；');
INSERT INTO `cmc_project_progress` VALUES (986, '1648881412514512898', '100', '2022-07-31 00:00:00', '提交资用成果资料。');
INSERT INTO `cmc_project_progress` VALUES (987, '1648881412493541377', '100', '2023-03-29 00:00:00', '报告归档');
INSERT INTO `cmc_project_progress` VALUES (988, '1648881412476764161', '40', '2022-08-03 00:00:00', '外业工作完成');
INSERT INTO `cmc_project_progress` VALUES (989, '1648881412476764161', '100', '2022-08-18 00:00:00', '提交正式成果资料');
INSERT INTO `cmc_project_progress` VALUES (990, '1648881412459986946', '100', '2022-10-10 00:00:00', '已归档');
INSERT INTO `cmc_project_progress` VALUES (991, '1648881412443209730', '10', '2022-08-06 00:00:00', '控制点选点、土建');
INSERT INTO `cmc_project_progress` VALUES (992, '1648881412443209730', '15', '2022-08-09 00:00:00', '相邻标段四等水准测量及四等GNSS测量');
INSERT INTO `cmc_project_progress` VALUES (993, '1648881412443209730', '50', '2022-09-15 00:00:00', 'GNSS二等及三等测量');
INSERT INTO `cmc_project_progress` VALUES (994, '1648881412443209730', '65', '2022-09-15 00:00:00', '三等水准测量');
INSERT INTO `cmc_project_progress` VALUES (995, '1648881412443209730', '100', '2022-09-17 00:00:00', '二等水准测量');
INSERT INTO `cmc_project_progress` VALUES (996, '1648881412422238210', '50', '2023-02-20 00:00:00', '完成外业数据采集工作');
INSERT INTO `cmc_project_progress` VALUES (997, '1648881412422238210', '80', '2023-04-25 00:00:00', '完成报告编写、检查，并提交资料成果');
INSERT INTO `cmc_project_progress` VALUES (998, '1648881412422238210', '90', '2023-06-19 00:00:00', '完成专家评审工作');
INSERT INTO `cmc_project_progress` VALUES (999, '1648881412422238210', '100', '2023-06-25 00:00:00', '完成项目竣工验收');
INSERT INTO `cmc_project_progress` VALUES (1000, '1648881412401266689', '20', '2022-08-02 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1001, '1648881412401266689', '50', '2022-08-06 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1002, '1648881412401266689', '60', '2022-08-16 00:00:00', '现场负责人已和业主沟通8.31提交正式成果，外调已经回来30%');
INSERT INTO `cmc_project_progress` VALUES (1003, '1648881412401266689', '70', '2022-08-19 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1004, '1648881412401266689', '80', '2022-08-23 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1005, '1648881412401266689', '100', '2022-08-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1006, '1648881412363517954', '90', '2022-08-10 00:00:00', '现场确权登记基本完成，正进行收尾工作');
INSERT INTO `cmc_project_progress` VALUES (1007, '1648881412363517954', '100', '2022-08-15 00:00:00', '现场已向甲方提交成果资料，外业人员撤场');
INSERT INTO `cmc_project_progress` VALUES (1008, '1648881412346740737', '60', '2022-09-01 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (1009, '1648881412346740737', '100', '2022-09-20 00:00:00', '项目完成');
INSERT INTO `cmc_project_progress` VALUES (1010, '1648881412329963522', '100', '2023-01-20 00:00:00', '已完成，资料待移交。');
INSERT INTO `cmc_project_progress` VALUES (1011, '1648881412313186305', '90', '2023-02-25 00:00:00', '已完成，集体所有权待验收、待市级验收。');
INSERT INTO `cmc_project_progress` VALUES (1012, '1648881412313186305', '100', '2023-07-31 00:00:00', '数据已完成移交，履约保证金已退，仅余市级是否验收未明确');
INSERT INTO `cmc_project_progress` VALUES (1013, '1648881412296409090', '100', '2022-09-15 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1014, '1648881412271243265', '100', '2022-10-08 00:00:00', '测区天气严重影响外业工作推进');
INSERT INTO `cmc_project_progress` VALUES (1015, '1648881412254466049', '30', '2022-09-30 00:00:00', '完成飞行');
INSERT INTO `cmc_project_progress` VALUES (1016, '1648881412254466049', '60', '2022-10-02 00:00:00', '完成控制、调绘、检查点等外业工作');
INSERT INTO `cmc_project_progress` VALUES (1017, '1648881412254466049', '80', '2022-10-11 00:00:00', '完成地形图（资用）');
INSERT INTO `cmc_project_progress` VALUES (1018, '1648881412254466049', '100', '2022-10-14 00:00:00', '提交地形图（正式）等资料');
INSERT INTO `cmc_project_progress` VALUES (1019, '1648881412237688834', '30', '2022-10-27 00:00:00', '完成白石河及大河坝生态厕所1:1000地形图测绘，大川镇巡护步道1:1000地形图测绘，E级GNSS测量飞行、调绘、检查点、控制等外业工作');
INSERT INTO `cmc_project_progress` VALUES (1020, '1648881412237688834', '30', '2022-09-28 00:00:00', '业主通知任务全部取消。因现场已完成飞行、调绘、控制、检查点等工作，与甲方沟通，要求我方保留资料但不进行后续内业生产。已完成工作按实际汇报工天及工作量，外业工天共8人/天');
INSERT INTO `cmc_project_progress` VALUES (1021, '1648881412237688834', '100', '2022-10-18 00:00:00', '项目由成勘院取消');
INSERT INTO `cmc_project_progress` VALUES (1022, '1648881412220911618', '30', '2022-09-29 00:00:00', '完成飞行');
INSERT INTO `cmc_project_progress` VALUES (1023, '1648881412220911618', '60', '2022-10-02 00:00:00', '完成控制、调绘、检查点等外业工作');
INSERT INTO `cmc_project_progress` VALUES (1024, '1648881412220911618', '70', '2022-10-11 00:00:00', '完成立面测量成图');
INSERT INTO `cmc_project_progress` VALUES (1025, '1648881412220911618', '100', '2022-10-14 00:00:00', '提交地形图（正式）等资料');
INSERT INTO `cmc_project_progress` VALUES (1026, '1648881412204134402', '70', '2022-10-10 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1027, '1648881412204134402', '100', '2022-10-16 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1028, '1648881412170579969', '100', '2022-12-10 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1029, '1648881412153802753', '30', '2022-10-06 00:00:00', '完成外业检查点测量工作；');
INSERT INTO `cmc_project_progress` VALUES (1030, '1648881412153802753', '70', '2022-10-12 00:00:00', '完成外业调绘工作，外业返回成都；');
INSERT INTO `cmc_project_progress` VALUES (1031, '1648881412153802753', '100', '2022-10-15 00:00:00', '将资用地形图成果提交甲方。');
INSERT INTO `cmc_project_progress` VALUES (1032, '1648881412141219841', '100', '2022-11-18 00:00:00', '现场工作结束');
INSERT INTO `cmc_project_progress` VALUES (1033, '1648881412124442625', '30', '2022-10-17 00:00:00', '完成监测基准点、监测点的选埋及安装工作');
INSERT INTO `cmc_project_progress` VALUES (1034, '1648881412124442625', '100', '2022-10-28 00:00:00', '完成全部外业监测工作，并提交全部监测简报。');
INSERT INTO `cmc_project_progress` VALUES (1035, '1648881412107665410', '90', '2023-02-15 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1036, '1648881412107665410', '100', '2023-02-27 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1037, '1648881412090888194', '50', '2023-02-02 00:00:00', '西藏疫情。2022年12月16日发出资料延期至2023年4月30日提交报告');
INSERT INTO `cmc_project_progress` VALUES (1038, '1648881412090888194', '90', '2023-03-15 00:00:00', '完成查龙水电站安全监测2021年度资料整编分析报告（送审稿）');
INSERT INTO `cmc_project_progress` VALUES (1039, '1648881412090888194', '100', '2023-06-05 00:00:00', '向业主提交最终成果报告');
INSERT INTO `cmc_project_progress` VALUES (1040, '1648881412074110977', '80', '2022-11-01 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1041, '1648881412074110977', '100', '2022-11-14 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1042, '1648881412057333761', '50', '2022-12-24 00:00:00', '完成空间数据林权图斑15万宗；案整理20万宗。');
INSERT INTO `cmc_project_progress` VALUES (1043, '1648881412057333761', '90', '2023-01-14 00:00:00', '完成空间数据林权图斑31万宗；案整理31万宗。');
INSERT INTO `cmc_project_progress` VALUES (1044, '1648881412057333761', '99', '2023-02-17 00:00:00', '完成318963宗市级汇交');
INSERT INTO `cmc_project_progress` VALUES (1045, '1648881412040556545', '10', '2022-11-25 00:00:00', '完成空间数据林权图斑5万宗；档案整理8万宗。');
INSERT INTO `cmc_project_progress` VALUES (1046, '1648881412040556545', '40', '2022-12-16 00:00:00', '完成空间数据林权图斑15万宗；档案整理35万宗。');
INSERT INTO `cmc_project_progress` VALUES (1047, '1648881412040556545', '70', '2023-01-15 00:00:00', '完成空间数据林权图斑30万宗；档案整理40万宗。');
INSERT INTO `cmc_project_progress` VALUES (1048, '1648881412040556545', '90', '2023-02-08 00:00:00', '共完成空间数据林权图斑量492307宗;部分还在整改中；属性表数据：林权492307条；宗地492307宗。');
INSERT INTO `cmc_project_progress` VALUES (1049, '1648881412040556545', '90', '2023-02-09 00:00:00', '完成492307宗市级汇交');
INSERT INTO `cmc_project_progress` VALUES (1050, '1648881412023779329', '100', '2022-11-03 00:00:00', '项目结束，相关资料已于现场移交成都院现场负责人');
INSERT INTO `cmc_project_progress` VALUES (1051, '1648881412002807809', '100', '2022-11-18 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1052, '1648881411986030594', '50', '2022-11-09 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1053, '1648881411986030594', '70', '2022-11-17 00:00:00', '完成采集');
INSERT INTO `cmc_project_progress` VALUES (1054, '1648881411986030594', '100', '2022-12-10 00:00:00', '完成解算，提交成果');
INSERT INTO `cmc_project_progress` VALUES (1055, '1648881411965059074', '100', '2022-11-28 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1056, '1648881411944087553', '100', '2022-12-03 00:00:00', '完成所有工作任务');
INSERT INTO `cmc_project_progress` VALUES (1057, '1648881411927310338', '100', '2022-11-30 00:00:00', '航飞');
INSERT INTO `cmc_project_progress` VALUES (1058, '1648881411927310338', '100', '2022-12-04 00:00:00', '水下');
INSERT INTO `cmc_project_progress` VALUES (1059, '1648881411906338818', '100', '2022-11-25 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1060, '1648881411885367297', '10', '2022-12-12 00:00:00', '像控点及检查点测量');
INSERT INTO `cmc_project_progress` VALUES (1061, '1648881411885367297', '30', '2022-12-27 00:00:00', '提交资用地形图成果');
INSERT INTO `cmc_project_progress` VALUES (1062, '1648881411885367297', '70', '2023-01-16 00:00:00', '外业完成现场任务，撤场');
INSERT INTO `cmc_project_progress` VALUES (1063, '1648881411885367297', '100', '2023-02-14 00:00:00', '提交成果');
INSERT INTO `cmc_project_progress` VALUES (1064, '1648881411868590081', '100', '2023-02-13 00:00:00', '疫情原因，成果提交日期延后。');
INSERT INTO `cmc_project_progress` VALUES (1065, '1648881411847618561', '100', '2022-12-09 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1066, '1648881411826647041', '60', '2023-01-04 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1067, '1648881411826647041', '100', '2023-01-17 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1068, '1648881411809869825', '50', '2022-12-17 00:00:00', '完成外业飞行任务');
INSERT INTO `cmc_project_progress` VALUES (1069, '1648881411809869825', '60', '2022-12-18 00:00:00', '完成检查点测量');
INSERT INTO `cmc_project_progress` VALUES (1070, '1648881411809869825', '70', '2022-12-19 00:00:00', '完成外业调绘');
INSERT INTO `cmc_project_progress` VALUES (1071, '1648881411809869825', '80', '2022-12-20 00:00:00', '完成控制点测量');
INSERT INTO `cmc_project_progress` VALUES (1072, '1648881411809869825', '100', '2022-12-23 00:00:00', '提交资用图');
INSERT INTO `cmc_project_progress` VALUES (1073, '1648881411788898307', '100', '2022-04-29 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1074, '1648881411788898306', '100', '2022-09-30 00:00:00', '项目款还有百分之十未到款未收');
INSERT INTO `cmc_project_progress` VALUES (1075, '1648881411788898305', '100', '2022-12-22 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1076, '1648881411772121090', '100', '2023-01-13 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1077, '1648881411751149569', '60', '2023-01-01 00:00:00', '河里有冰，无法进行水下测量');
INSERT INTO `cmc_project_progress` VALUES (1078, '1648881411751149569', '100', '2023-02-18 00:00:00', '全部完成');
INSERT INTO `cmc_project_progress` VALUES (1079, '1648881411730178050', '100', '2022-12-23 00:00:00', '完成所有工作任务');
INSERT INTO `cmc_project_progress` VALUES (1080, '1648881411705012226', '90', '2023-05-31 00:00:00', '已汇交自然资源部，可能会有少量反馈修整工作');
INSERT INTO `cmc_project_progress` VALUES (1081, '1648881411705012226', '100', '2023-08-18 00:00:00', '省厅已发通知数据启用');
INSERT INTO `cmc_project_progress` VALUES (1082, '1648881411688235010', '100', '2022-12-31 00:00:00', '成果已并入2021年度变更调查');
INSERT INTO `cmc_project_progress` VALUES (1083, '1648881411667263489', '100', '2023-01-03 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1084, '1648881411667263489', '100', '2023-01-09 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1085, '1648881411650486273', '10', '2023-02-10 00:00:00', '现场点位查勘，观测前准备工作');
INSERT INTO `cmc_project_progress` VALUES (1086, '1648881411650486273', '30', '2023-02-20 00:00:00', '压力钢管段水准测量结束');
INSERT INTO `cmc_project_progress` VALUES (1087, '1648881411650486273', '70', '2023-03-24 00:00:00', '平面网全部观测完成');
INSERT INTO `cmc_project_progress` VALUES (1088, '1648881411650486273', '90', '2023-04-02 00:00:00', 'GNSS观测完成');
INSERT INTO `cmc_project_progress` VALUES (1089, '1648881411650486273', '100', '2023-06-14 00:00:00', '经过技术质量部审核，出版最终成果提交甲方');
INSERT INTO `cmc_project_progress` VALUES (1090, '1648881411633709057', '0', '2022-11-02 00:00:00', '项目沟通准备');
INSERT INTO `cmc_project_progress` VALUES (1091, '1648881411633709057', '5', '2022-11-05 00:00:00', '找飞马借SLAM扫描设备，学习试用');
INSERT INTO `cmc_project_progress` VALUES (1092, '1648881411633709057', '10', '2022-11-08 00:00:00', '项目进场，业主沟通');
INSERT INTO `cmc_project_progress` VALUES (1093, '1648881411633709057', '30', '2022-11-11 00:00:00', '外业工作，扫描多数完成');
INSERT INTO `cmc_project_progress` VALUES (1094, '1648881411633709057', '30', '2022-11-12 00:00:00', '重庆实施封闭式管理');
INSERT INTO `cmc_project_progress` VALUES (1095, '1648881411633709057', '80', '2022-11-26 00:00:00', '持续内业建模工作');
INSERT INTO `cmc_project_progress` VALUES (1096, '1648881411633709057', '80', '2022-11-28 00:00:00', '社区同意我4人回成都，回作业现场扫描解算有问题路段后返回成都隔离');
INSERT INTO `cmc_project_progress` VALUES (1097, '1648881411633709057', '85', '2022-12-21 00:00:00', '回公司上班，与业主签订合同，付一半费用');
INSERT INTO `cmc_project_progress` VALUES (1098, '1648881411633709057', '90', '2023-03-11 00:00:00', '按业主要求进行数据修改');
INSERT INTO `cmc_project_progress` VALUES (1099, '1648881411633709057', '100', '2023-07-26 00:00:00', '业主完成另一半费用支付，项目结束');
INSERT INTO `cmc_project_progress` VALUES (1100, '1648881411612737537', '100', '2022-12-28 00:00:00', '外业工作结束');
INSERT INTO `cmc_project_progress` VALUES (1101, '1648881411587571714', '70', '2023-01-03 00:00:00', '只剩调绘工作，暂时离场');
INSERT INTO `cmc_project_progress` VALUES (1102, '1648881411587571714', '100', '2023-01-11 00:00:00', '项目结束');
INSERT INTO `cmc_project_progress` VALUES (1103, '1648881411562405890', '100', '2023-06-14 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1104, '1648881411533045762', '10', '2023-02-05 00:00:00', '航飞90%，剩余一个架次(天气不好)');
INSERT INTO `cmc_project_progress` VALUES (1105, '1648881411533045762', '70', '2023-02-16 00:00:00', '完成外业工作');
INSERT INTO `cmc_project_progress` VALUES (1106, '1648881411533045762', '80', '2023-02-27 00:00:00', '完成2000国家大地坐标系成果地形图提交，内业剩余地形图工程坐标系。预计明天提交');
INSERT INTO `cmc_project_progress` VALUES (1107, '1648881411533045762', '100', '2023-02-28 00:00:00', '提交地形图工程坐标系，完成项目全部工作内容');
INSERT INTO `cmc_project_progress` VALUES (1108, '1648881411499491388', '100', '2023-05-02 00:00:00', '控制平面复核');
INSERT INTO `cmc_project_progress` VALUES (1109, '1648881411499491388', '100', '2023-05-02 00:00:00', '控制高程复核');
INSERT INTO `cmc_project_progress` VALUES (1110, '1648881411499491388', '100', '2023-05-05 00:00:00', '坝上地形图复核');
INSERT INTO `cmc_project_progress` VALUES (1111, '1648881411499491387', '10', '2023-04-25 00:00:00', '项目进场，开展工作');
INSERT INTO `cmc_project_progress` VALUES (1112, '1648881411499491387', '30', '2023-05-04 00:00:00', '完成部分特征点测量工作，周霖、王海滨离场');
INSERT INTO `cmc_project_progress` VALUES (1113, '1648881411499491387', '50', '2023-05-09 00:00:00', '完成全部工作，项目结束。');
INSERT INTO `cmc_project_progress` VALUES (1114, '1648881411499491387', '80', '2023-12-17 00:00:00', '完成大断面测量工作');
INSERT INTO `cmc_project_progress` VALUES (1115, '1648881411499491387', '100', '2023-12-26 00:00:00', '完成全部新增工作');
INSERT INTO `cmc_project_progress` VALUES (1116, '1648881411499491386', '10', '2023-05-20 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1117, '1648881411499491386', '60', '2023-06-28 00:00:00', '完成42个区块外业飞行');
INSERT INTO `cmc_project_progress` VALUES (1118, '1648881411499491386', '100', '2023-11-22 00:00:00', '完成');
INSERT INTO `cmc_project_progress` VALUES (1119, '1648881411499491385', '30', '2023-04-30 00:00:00', '断面基点选埋、测量；横断面岸上部分测量；');
INSERT INTO `cmc_project_progress` VALUES (1120, '1648881411499491385', '50', '2023-05-06 00:00:00', '完成部分断面水下地形测量、完成2组同时水面线测量');
INSERT INTO `cmc_project_progress` VALUES (1121, '1648881411499491385', '60', '2023-05-10 00:00:00', '完成现阶段外业工作');
INSERT INTO `cmc_project_progress` VALUES (1122, '1648881411499491384', '10', '2023-05-18 00:00:00', '进场');
INSERT INTO `cmc_project_progress` VALUES (1123, '1648881411499491384', '30', '2023-05-19 00:00:00', '飞行采集完成');
INSERT INTO `cmc_project_progress` VALUES (1124, '1648881411499491384', '50', '2023-05-30 00:00:00', '外业调绘、检查点，资用成果提交');
INSERT INTO `cmc_project_progress` VALUES (1125, '1648881411499491384', '70', '2023-06-01 00:00:00', '外业调绘、检查点完成');
INSERT INTO `cmc_project_progress` VALUES (1126, '1648881411499491384', '100', '2023-06-09 00:00:00', '正式图');
INSERT INTO `cmc_project_progress` VALUES (1127, '1648881411499491383', '100', '2023-05-23 00:00:00', '无人机飞行');
INSERT INTO `cmc_project_progress` VALUES (1128, '1648881411499491383', '100', '2023-05-23 00:00:00', '像控点测量');
INSERT INTO `cmc_project_progress` VALUES (1129, '1648881411499491383', '100', '2023-05-23 00:00:00', '检查点测量');
INSERT INTO `cmc_project_progress` VALUES (1130, '1648881411499491383', '100', '2023-05-25 00:00:00', '调绘');
INSERT INTO `cmc_project_progress` VALUES (1131, '1648881411499491382', '30', '2023-05-29 00:00:00', '完成数据采集');
INSERT INTO `cmc_project_progress` VALUES (1132, '1648881411499491382', '60', '2023-07-20 00:00:00', '地形图资用图完成，外业调绘完成');
INSERT INTO `cmc_project_progress` VALUES (1133, '1648881411499491382', '80', '2023-08-04 00:00:00', '新增范围地形图资用完成');
INSERT INTO `cmc_project_progress` VALUES (1134, '1648881411499491382', '100', '2023-08-25 00:00:00', '三维地形面完成');
INSERT INTO `cmc_project_progress` VALUES (1135, '1648881411499491381', '20', '2023-07-28 00:00:00', '完成实物指标调查配合工作');
INSERT INTO `cmc_project_progress` VALUES (1136, '1648881411499491381', '80', '2023-08-26 00:00:00', '完成界桩埋设工作');
INSERT INTO `cmc_project_progress` VALUES (1137, '1648881411499491381', '100', '2023-09-02 00:00:00', '完成界桩及水位牌埋设工作');
INSERT INTO `cmc_project_progress` VALUES (1138, '1648881411499491380', '60', '2023-06-07 00:00:00', '完成现场放点工作');
INSERT INTO `cmc_project_progress` VALUES (1139, '1648881411499491380', '100', '2023-06-11 00:00:00', '完成地形图补测工作');
INSERT INTO `cmc_project_progress` VALUES (1140, '1648881411499491379', '30', '2023-06-16 00:00:00', '完成飞行数据采集');
INSERT INTO `cmc_project_progress` VALUES (1141, '1648881411499491379', '50', '2023-06-18 00:00:00', '外业工作结束');
INSERT INTO `cmc_project_progress` VALUES (1142, '1648881411499491379', '100', '2023-06-25 00:00:00', '提交正式资料');
INSERT INTO `cmc_project_progress` VALUES (1143, '1648881411499491378', '100', '2023-06-09 00:00:00', '正式资料提交');
INSERT INTO `cmc_project_progress` VALUES (1144, '1648881411499491377', '10', '2023-06-06 00:00:00', '航飞区域数据采集完成');
INSERT INTO `cmc_project_progress` VALUES (1145, '1648881411499491377', '15', '2023-06-08 00:00:00', '完成地形图收集工作');
INSERT INTO `cmc_project_progress` VALUES (1146, '1648881411499491377', '30', '2023-06-21 00:00:00', '完成外业像控点测量，内业解译底图制作');
INSERT INTO `cmc_project_progress` VALUES (1147, '1648881411499491377', '80', '2023-07-29 00:00:00', '初步完成10个乡镇内业解译工作');
INSERT INTO `cmc_project_progress` VALUES (1148, '1648881411499491377', '100', '2023-09-28 00:00:00', '完成DOM,配合完成面积统计分析');
INSERT INTO `cmc_project_progress` VALUES (1149, '1648881411499491376', '30', '2023-07-07 00:00:00', '完成外业数据采集工作');
INSERT INTO `cmc_project_progress` VALUES (1150, '1648881411499491376', '50', '2023-07-28 00:00:00', '完成新测范围地物采集工作，外业同步开展调绘及修补测工作');
INSERT INTO `cmc_project_progress` VALUES (1151, '1648881411499491376', '80', '2023-08-03 00:00:00', '提交地形图资用成果');
INSERT INTO `cmc_project_progress` VALUES (1152, '1648881411499491376', '100', '2023-08-14 00:00:00', '提交正式测绘产品');
INSERT INTO `cmc_project_progress` VALUES (1153, '1648881411499491375', '30', '2023-07-04 00:00:00', '已完成飞行、像控点、检查点等外业工作。');
INSERT INTO `cmc_project_progress` VALUES (1154, '1648881411499491375', '70', '2023-07-27 00:00:00', '完成外业调绘及修补测工作，内业开始编辑成图');
INSERT INTO `cmc_project_progress` VALUES (1155, '1648881411499491375', '100', '2023-08-02 00:00:00', '提交地形图正式产品');
INSERT INTO `cmc_project_progress` VALUES (1156, '1648881411499491374', '20', '2023-06-26 00:00:00', '完成飞行工作，内业开始数据处理');
INSERT INTO `cmc_project_progress` VALUES (1157, '1648881411499491374', '60', '2023-06-29 00:00:00', '外业工作结束');
INSERT INTO `cmc_project_progress` VALUES (1158, '1648881411499491374', '100', '2023-07-04 00:00:00', '提交正式资料');
INSERT INTO `cmc_project_progress` VALUES (1159, '1648881411499491373', '100', '2023-06-29 00:00:00', '无人机飞行');
INSERT INTO `cmc_project_progress` VALUES (1160, '1648881411499491373', '70', '2023-06-29 00:00:00', '调绘');
INSERT INTO `cmc_project_progress` VALUES (1161, '1648881411499491373', '100', '2023-06-29 00:00:00', '水下测量');
INSERT INTO `cmc_project_progress` VALUES (1162, '1648881411499491373', '100', '2023-06-29 00:00:00', '检查点，像控点，断面测量');
INSERT INTO `cmc_project_progress` VALUES (1163, '1648881411499491372', '30', '2023-07-12 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1164, '1648881411499491372', '80', '2023-07-21 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1165, '1648881411499491372', '100', '2023-07-21 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1166, '1648881411499491371', '40', '2023-07-07 00:00:00', '外业飞行完成');
INSERT INTO `cmc_project_progress` VALUES (1167, '1648881411499491371', '60', '2023-07-12 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1168, '1648881411499491371', '80', '2023-07-15 00:00:00', '地形图资用图已提交');
INSERT INTO `cmc_project_progress` VALUES (1169, '1648881411499491371', '100', '2023-07-20 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1170, '1648881411499491370', '80', '2023-07-04 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1171, '1648881411499491370', '100', '2023-07-05 00:00:00', '撤场回成都');
INSERT INTO `cmc_project_progress` VALUES (1172, '1648881411499491369', '50', '2023-07-08 00:00:00', '完成外业数据采集工作');
INSERT INTO `cmc_project_progress` VALUES (1173, '1648881411499491369', '100', '2023-07-12 00:00:00', '提交正式成果');
INSERT INTO `cmc_project_progress` VALUES (1174, '1648881411499491368', '40', '2023-07-21 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1175, '1648881411499491368', '100', '2023-07-24 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1176, '1648881411499491367', '80', '2023-08-04 00:00:00', '完成外业工作');
INSERT INTO `cmc_project_progress` VALUES (1177, '1648881411499491367', '100', '2023-08-14 00:00:00', '提交正式图');
INSERT INTO `cmc_project_progress` VALUES (1178, '1648881411499491366', '60', '2023-08-04 00:00:00', '结束外业工作，开支地形图编辑。');
INSERT INTO `cmc_project_progress` VALUES (1179, '1648881411499491366', '100', '2023-08-11 00:00:00', '提交测绘产品成果');
INSERT INTO `cmc_project_progress` VALUES (1180, '1648881411499491365', '60', '2023-08-26 00:00:00', '完成白玉县测区外业工作');
INSERT INTO `cmc_project_progress` VALUES (1181, '1648881411499491365', '90', '2023-09-03 00:00:00', '完成全部外业工作');
INSERT INTO `cmc_project_progress` VALUES (1182, '1648881411499491365', '100', '2023-09-06 00:00:00', '地形图及控制成果提交甲方');
INSERT INTO `cmc_project_progress` VALUES (1183, '1648881411499491365', '100', '2023-10-23 00:00:00', '变更增加断面任务，26条提交甲方');
INSERT INTO `cmc_project_progress` VALUES (1184, '1648881411499491364', '10', '2023-08-12 00:00:00', '完成控制及检查点测量');
INSERT INTO `cmc_project_progress` VALUES (1185, '1648881411499491364', '30', '2023-08-17 00:00:00', '完成数据采集');
INSERT INTO `cmc_project_progress` VALUES (1186, '1648881411499491364', '100', '2023-08-21 00:00:00', '提交地形图成果');
INSERT INTO `cmc_project_progress` VALUES (1187, '1648881411499491363', '30', '2023-08-21 00:00:00', '数据采集完成');
INSERT INTO `cmc_project_progress` VALUES (1188, '1648881411499491363', '50', '2023-08-23 00:00:00', '外业控制调绘完成');
INSERT INTO `cmc_project_progress` VALUES (1189, '1648881411499491363', '100', '2023-08-28 00:00:00', '地形图完成');
INSERT INTO `cmc_project_progress` VALUES (1190, '1648881411499491362', '0', '2023-08-14 00:00:00', '人员进场，开展相关工作；');
INSERT INTO `cmc_project_progress` VALUES (1191, '1648881411499491362', '50', '2023-08-23 00:00:00', '正常开展配合测量工作；');
INSERT INTO `cmc_project_progress` VALUES (1192, '1648881411499491362', '100', '2023-09-01 00:00:00', '外业撤场返回成都。');
INSERT INTO `cmc_project_progress` VALUES (1193, '1648881411499491361', '20', '2023-08-19 00:00:00', '飞行采集');
INSERT INTO `cmc_project_progress` VALUES (1194, '1648881411499491361', '40', '2023-08-20 00:00:00', '内业数据处理');
INSERT INTO `cmc_project_progress` VALUES (1195, '1648881411499491361', '100', '2023-08-22 00:00:00', '提交资用图');
INSERT INTO `cmc_project_progress` VALUES (1196, '1648881411499491361', '100', '2023-08-25 00:00:00', '正式图提交');
INSERT INTO `cmc_project_progress` VALUES (1197, '1648881411499491360', '0', '2023-08-22 00:00:00', '进场');
INSERT INTO `cmc_project_progress` VALUES (1198, '1648881411499491360', '20', '2023-08-23 00:00:00', '控制测量');
INSERT INTO `cmc_project_progress` VALUES (1199, '1648881411499491360', '50', '2023-08-24 00:00:00', '外业调绘');
INSERT INTO `cmc_project_progress` VALUES (1200, '1648881411499491360', '60', '2023-08-25 00:00:00', '内业数据处理');
INSERT INTO `cmc_project_progress` VALUES (1201, '1648881411499491360', '100', '2023-09-01 00:00:00', '资料提交');
INSERT INTO `cmc_project_progress` VALUES (1202, '1648881411499491359', '10', '2023-09-10 00:00:00', '控制点埋设78点，航飞约95k㎡');
INSERT INTO `cmc_project_progress` VALUES (1203, '1648881411499491359', '20', '2023-09-20 00:00:00', '控制点埋设完成、航飞约80%');
INSERT INTO `cmc_project_progress` VALUES (1204, '1648881411499491359', '30', '2023-09-26 00:00:00', '平面观测完成，航飞完成');
INSERT INTO `cmc_project_progress` VALUES (1205, '1648881411499491359', '40', '2023-10-10 00:00:00', '提交坝址下游及4个滑坡区资用地形图');
INSERT INTO `cmc_project_progress` VALUES (1206, '1648881411499491359', '60', '2023-10-23 00:00:00', '提交全部资用地形图');
INSERT INTO `cmc_project_progress` VALUES (1207, '1648881411499491359', '70', '2023-11-03 00:00:00', '项目因当地村民及政府阻止，暂停工作，待成勘院协调好再开展剩余工作');
INSERT INTO `cmc_project_progress` VALUES (1208, '1648881411499491358', '100', '2023-09-08 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1209, '1648881411499491357', '100', '2023-09-01 00:00:00', '资料提交');
INSERT INTO `cmc_project_progress` VALUES (1210, '1648881411499491356', '20', '2023-09-08 00:00:00', '完成实物指标调查配合测量工作，人员暂时撤离现场。');
INSERT INTO `cmc_project_progress` VALUES (1211, '1648881411499491355', '40', '2023-09-06 00:00:00', '完成无人机数据采集');
INSERT INTO `cmc_project_progress` VALUES (1212, '1648881411499491355', '70', '2023-09-09 00:00:00', '完成全部外业工作');
INSERT INTO `cmc_project_progress` VALUES (1213, '1648881411499491355', '100', '2023-09-13 00:00:00', '提交正式成果');
INSERT INTO `cmc_project_progress` VALUES (1214, '1648881411499491354', '0', '2023-09-20 00:00:00', '进场');
INSERT INTO `cmc_project_progress` VALUES (1215, '1648881411499491354', '10', '2023-09-22 00:00:00', '飞行数据采集');
INSERT INTO `cmc_project_progress` VALUES (1216, '1648881411499491354', '20', '2023-09-24 00:00:00', '检查点测量完成');
INSERT INTO `cmc_project_progress` VALUES (1217, '1648881411499491354', '0', '2023-09-25 00:00:00', '控制点埋设');
INSERT INTO `cmc_project_progress` VALUES (1218, '1648881411499491354', '50', '2023-10-07 00:00:00', '内业数据处理');
INSERT INTO `cmc_project_progress` VALUES (1219, '1648881411499491354', '70', '2023-10-17 00:00:00', '出场');
INSERT INTO `cmc_project_progress` VALUES (1220, '1648881411499491354', '100', '2023-10-18 00:00:00', '资用资料提交');
INSERT INTO `cmc_project_progress` VALUES (1221, '1648881411499491353', '100', '2023-09-28 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1222, '1648881411499491352', '50', '2023-09-15 00:00:00', '完成外业工作，人员返回成都');
INSERT INTO `cmc_project_progress` VALUES (1223, '1648881411499491352', '70', '2023-09-18 00:00:00', '完成已有资料搜集整理、完成记载激光点云分类');
INSERT INTO `cmc_project_progress` VALUES (1224, '1648881411499491352', '100', '2023-10-12 00:00:00', '提交正式资料');
INSERT INTO `cmc_project_progress` VALUES (1225, '1648881411499491351', '0', '2023-09-21 00:00:00', '进场');
INSERT INTO `cmc_project_progress` VALUES (1226, '1648881411499491351', '40', '2023-09-23 00:00:00', '飞行采集、像控、检查点、调绘');
INSERT INTO `cmc_project_progress` VALUES (1227, '1648881411499491351', '0', '2023-09-24 00:00:00', '出场');
INSERT INTO `cmc_project_progress` VALUES (1228, '1648881411499491351', '50', '2023-09-25 00:00:00', '内业数据处理');
INSERT INTO `cmc_project_progress` VALUES (1229, '1648881411499491351', '100', '2023-10-11 00:00:00', '资料提交');
INSERT INTO `cmc_project_progress` VALUES (1230, '1648881411499491351', '100', '2024-01-25 00:00:00', '第三次进场，水下测绘');
INSERT INTO `cmc_project_progress` VALUES (1231, '1648881411499491351', '100', '2024-01-26 00:00:00', '完成水下测绘，出场');
INSERT INTO `cmc_project_progress` VALUES (1232, '1648881411499491351', '100', '2024-02-26 00:00:00', '水下成果提交');
INSERT INTO `cmc_project_progress` VALUES (1233, '1648881411499491350', '30', '2023-10-08 00:00:00', '已提交1:5000范围资用地形图');
INSERT INTO `cmc_project_progress` VALUES (1234, '1648881411499491350', '80', '2023-10-15 00:00:00', '外业工作结束');
INSERT INTO `cmc_project_progress` VALUES (1235, '1648881411499491350', '100', '2023-10-16 00:00:00', '提交地形图正式成果');
INSERT INTO `cmc_project_progress` VALUES (1236, '1648881411499491349', '30', '2023-10-07 00:00:00', '完成控制测量工作；');
INSERT INTO `cmc_project_progress` VALUES (1237, '1648881411499491349', '60', '2023-10-14 00:00:00', '完成水下地形测量工作；');
INSERT INTO `cmc_project_progress` VALUES (1238, '1648881411499491349', '100', '2023-11-07 00:00:00', '完成全部外业工作。');
INSERT INTO `cmc_project_progress` VALUES (1239, '1648881411499491348', '50', '2023-10-17 00:00:00', '完成外业控制与调绘工作');
INSERT INTO `cmc_project_progress` VALUES (1240, '1648881411499491348', '100', '2023-10-23 00:00:00', '提交资用图');
INSERT INTO `cmc_project_progress` VALUES (1241, '1648881411499491347', '30', '2023-10-15 00:00:00', '飞行采集');
INSERT INTO `cmc_project_progress` VALUES (1242, '1648881411499491347', '100', '2023-10-20 00:00:00', '资用图提交');
INSERT INTO `cmc_project_progress` VALUES (1243, '1648881411499491347', '100', '2023-11-02 00:00:00', '正式资料提交');
INSERT INTO `cmc_project_progress` VALUES (1244, '1648881411499491346', '10', '2023-10-30 00:00:00', '外业进场、开展检查点测量工作；');
INSERT INTO `cmc_project_progress` VALUES (1245, '1648881411499491346', '30', '2023-11-02 00:00:00', '无人机组进场，开展无人机飞行工作；');
INSERT INTO `cmc_project_progress` VALUES (1246, '1648881411499491346', '70', '2023-11-04 00:00:00', '完成全部无人机飞行，无人机组撤场；');
INSERT INTO `cmc_project_progress` VALUES (1247, '1648881411499491346', '80', '2023-11-05 00:00:00', '完成全部外业工作，外业人员撤场。');
INSERT INTO `cmc_project_progress` VALUES (1248, '1648881411499491346', '100', '2023-12-13 00:00:00', '资用地形图交付甲方。');
INSERT INTO `cmc_project_progress` VALUES (1249, '1648881411499491343', '30', '2023-11-10 00:00:00', '完成白格、宁巴测区外业工作');
INSERT INTO `cmc_project_progress` VALUES (1250, '1648881411499491343', '60', '2023-11-13 00:00:00', '完成全部外业工作');
INSERT INTO `cmc_project_progress` VALUES (1251, '1648881411499491343', '95', '2023-11-29 00:00:00', '提交资用成果');
INSERT INTO `cmc_project_progress` VALUES (1252, '1648881411499491343', '100', '2023-12-01 00:00:00', '提交地形图正式成果');
INSERT INTO `cmc_project_progress` VALUES (1253, '1648881411499491342', '0', '2023-11-05 00:00:00', '飞行进场');
INSERT INTO `cmc_project_progress` VALUES (1254, '1648881411499491342', '0', '2023-11-06 00:00:00', '外业进场');
INSERT INTO `cmc_project_progress` VALUES (1255, '1648881411499491342', '20', '2023-11-11 00:00:00', '昭觉测区飞行采集完成');
INSERT INTO `cmc_project_progress` VALUES (1256, '1648881411499491342', '30', '2023-11-12 00:00:00', '控制测量');
INSERT INTO `cmc_project_progress` VALUES (1257, '1648881411499491342', '40', '2023-11-15 00:00:00', '宁南飞行数据采集');
INSERT INTO `cmc_project_progress` VALUES (1258, '1648881411499491342', '40', '2023-11-16 00:00:00', '昭觉外业调绘，内业激光数据处理、外业转场宁南');
INSERT INTO `cmc_project_progress` VALUES (1259, '1648881411499491342', '50', '2023-11-17 00:00:00', '宁南检查点测量');
INSERT INTO `cmc_project_progress` VALUES (1260, '1648881411499491342', '80', '2023-11-22 00:00:00', '外业出场返回成都');
INSERT INTO `cmc_project_progress` VALUES (1261, '1648881411499491342', '100', '2023-11-24 00:00:00', '宁南测区资用图');
INSERT INTO `cmc_project_progress` VALUES (1262, '1648881411499491341', '100', '2023-11-27 00:00:00', '地形图交付业主');
INSERT INTO `cmc_project_progress` VALUES (1263, '1648881411499491340', '0', '2023-11-07 00:00:00', '人员进场，工作准备；');
INSERT INTO `cmc_project_progress` VALUES (1264, '1648881411499491340', '60', '2023-11-10 00:00:00', '完成GNSS测量；');
INSERT INTO `cmc_project_progress` VALUES (1265, '1648881411499491340', '100', '2023-11-13 00:00:00', '完成三角高程测量；');
INSERT INTO `cmc_project_progress` VALUES (1266, '1648881411499491339', '30', '2023-11-21 00:00:00', '完成数据采集工作');
INSERT INTO `cmc_project_progress` VALUES (1267, '1648881411499491339', '50', '2023-12-04 00:00:00', '提交资用成果');
INSERT INTO `cmc_project_progress` VALUES (1268, '1648881411499491339', '80', '2023-12-15 00:00:00', '外业工作结束');
INSERT INTO `cmc_project_progress` VALUES (1269, '1648881411499491339', '100', '2023-12-22 00:00:00', '提交正式产品');
INSERT INTO `cmc_project_progress` VALUES (1270, '1648881411499491338', '30', '2023-11-12 00:00:00', '完成无人机航飞及像控点测量。');
INSERT INTO `cmc_project_progress` VALUES (1271, '1648881411499491338', '70', '2023-11-16 00:00:00', '完成控制测量及水下测量');
INSERT INTO `cmc_project_progress` VALUES (1272, '1648881411499491338', '100', '2023-11-21 00:00:00', '资料经技术质量部检查通过后已提交成都院。');
INSERT INTO `cmc_project_progress` VALUES (1273, '1648881411499491337', '100', '2023-12-19 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1274, '1648881411499491336', '30', '2023-11-29 00:00:00', '数据采集完成，外业已进场。');
INSERT INTO `cmc_project_progress` VALUES (1275, '1648881411499491336', '60', '2023-12-06 00:00:00', '外业工作已结束。');
INSERT INTO `cmc_project_progress` VALUES (1276, '1648881411499491336', '100', '2023-12-08 00:00:00', '正式成果提交业主');
INSERT INTO `cmc_project_progress` VALUES (1277, '1648881411499491335', '10', '2023-11-30 00:00:00', '完成了格林渣场检查点、控制点、无人机飞行工作；');
INSERT INTO `cmc_project_progress` VALUES (1278, '1648881411499491335', '60', '2024-01-14 00:00:00', '完成了墨脱县区域检查点、控制点、外业调绘、水下地形测量工作；');
INSERT INTO `cmc_project_progress` VALUES (1279, '1648881411499491335', '80', '2024-02-18 00:00:00', '完成全部外业工作；');
INSERT INTO `cmc_project_progress` VALUES (1280, '1648881411499491334', '10', '2023-12-11 00:00:00', '测区控制已完成');
INSERT INTO `cmc_project_progress` VALUES (1281, '1648881411499491334', '50', '2023-12-19 00:00:00', '数据已采集完成');
INSERT INTO `cmc_project_progress` VALUES (1282, '1648881411499491334', '100', '2024-01-05 00:00:00', '资料已提交业主');
INSERT INTO `cmc_project_progress` VALUES (1283, '1648881411499491333', '50', '2024-01-08 00:00:00', '外业工作已结束');
INSERT INTO `cmc_project_progress` VALUES (1284, '1648881411499491333', '100', '2024-01-22 00:00:00', '成果已提交业主');
INSERT INTO `cmc_project_progress` VALUES (1285, '1648881411499491332', '30', '2023-12-14 00:00:00', '控制测量、检查点、及调绘');
INSERT INTO `cmc_project_progress` VALUES (1286, '1648881411499491332', '30', '2023-12-15 00:00:00', '外业组出场');
INSERT INTO `cmc_project_progress` VALUES (1287, '1648881411499491332', '50', '2023-12-20 00:00:00', '飞行采集');
INSERT INTO `cmc_project_progress` VALUES (1288, '1648881411499491332', '100', '2023-12-29 00:00:00', '正式图提交');
INSERT INTO `cmc_project_progress` VALUES (1289, '1648881411499491331', '100', '2024-01-16 00:00:00', '成果已完成，待甲方接收资料');
INSERT INTO `cmc_project_progress` VALUES (1290, '1648881411499491330', '60', '2023-12-11 00:00:00', '完成断4座面、剖面测量工作');
INSERT INTO `cmc_project_progress` VALUES (1291, '1648881411499491330', '100', '2023-12-19 00:00:00', '完成全部断面、剖面测量工作');
INSERT INTO `cmc_project_progress` VALUES (1292, '1648881411499491329', '100', '2023-01-16 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1293, '1648881411457548290', '30', '2023-02-08 00:00:00', '完成平面控制及调绘、检查点工作');
INSERT INTO `cmc_project_progress` VALUES (1294, '1648881411457548290', '50', '2023-02-09 00:00:00', '完成航飞');
INSERT INTO `cmc_project_progress` VALUES (1295, '1648881411457548290', '70', '2023-02-20 00:00:00', '完成地形图成果提交，外业剩余高程控制测量，内业剩余地形图工程坐标系及三维地形面');
INSERT INTO `cmc_project_progress` VALUES (1296, '1648881411457548290', '80', '2023-02-27 00:00:00', '完成地形图成果提交，外业剩余高程控制测量7公里，内业剩余地形图工程坐标系及三维地形面');
INSERT INTO `cmc_project_progress` VALUES (1297, '1648881411457548290', '90', '2023-02-28 00:00:00', '完成外业工作，内业剩余地形图工程坐标系及三维地形面');
INSERT INTO `cmc_project_progress` VALUES (1298, '1648881411457548290', '100', '2023-03-14 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1299, '1648881411419799553', '20', '2023-02-24 00:00:00', '按照业主要求，正常开展技术服务工作。');
INSERT INTO `cmc_project_progress` VALUES (1300, '1648881411419799553', '50', '2023-06-30 00:00:00', '按照业主要求，正常开展技术服务工作。');
INSERT INTO `cmc_project_progress` VALUES (1301, '1648881411419799553', '70', '2023-09-21 00:00:00', '按照业主要求，正常开展技术服务工作。');
INSERT INTO `cmc_project_progress` VALUES (1302, '1648881411373662209', '10', '2023-02-15 00:00:00', '完成方案审批、安全培训等准备工作');
INSERT INTO `cmc_project_progress` VALUES (1303, '1648881411373662209', '40', '2023-02-21 00:00:00', '完成断面基点维护、校核及恢复联测等工作');
INSERT INTO `cmc_project_progress` VALUES (1304, '1648881411373662209', '80', '2023-03-12 00:00:00', '结束外业数据采集工作');
INSERT INTO `cmc_project_progress` VALUES (1305, '1648881411373662209', '100', '2023-04-12 00:00:00', '提交报告');
INSERT INTO `cmc_project_progress` VALUES (1306, '1648881411348496386', '20', '2023-02-27 00:00:00', '按照业主要求开展技术工作。');
INSERT INTO `cmc_project_progress` VALUES (1307, '1648881411348496386', '50', '2023-06-30 00:00:00', '按照业主要求开展技术工作。');
INSERT INTO `cmc_project_progress` VALUES (1308, '1648881411348496386', '80', '2023-10-21 00:00:00', '按照业主要求开展技术工作。');
INSERT INTO `cmc_project_progress` VALUES (1309, '1648881411331719170', '100', '2023-12-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1310, '1648881411319136258', '100', '2023-12-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1311, '1648881411298164738', '40', '2023-02-22 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1312, '1648881411298164738', '80', '2023-10-12 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1313, '1648881411298164738', '100', '2024-01-01 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1314, '1648881411281387521', '40', '2023-02-22 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1315, '1648881411281387521', '80', '2023-10-12 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1316, '1648881411281387521', '100', '2024-01-01 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1317, '1648881411268804610', '10', '2023-02-22 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1318, '1648881411268804610', '20', '2023-03-01 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1319, '1648881411268804610', '30', '2023-04-10 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1320, '1648881411268804610', '40', '2023-04-20 00:00:00', '向甲方办理2023年一季度结算');
INSERT INTO `cmc_project_progress` VALUES (1321, '1648881411268804610', '50', '2023-06-15 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1322, '1648881411268804610', '60', '2023-08-05 00:00:00', '二季度结算已办理并已收款');
INSERT INTO `cmc_project_progress` VALUES (1323, '1648881411268804610', '70', '2023-11-27 00:00:00', '向甲方申请2022年全年及2023年上半年人员费价差调整费用');
INSERT INTO `cmc_project_progress` VALUES (1324, '1648881411268804610', '100', '2024-12-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1325, '1648881411252027394', '20', '2023-02-08 00:00:00', '数据采集完成');
INSERT INTO `cmc_project_progress` VALUES (1326, '1648881411252027394', '100', '2023-02-15 00:00:00', '提交地形图资用图');
INSERT INTO `cmc_project_progress` VALUES (1327, '1648881411235250178', '0', '2023-02-04 00:00:00', '项目进场；');
INSERT INTO `cmc_project_progress` VALUES (1328, '1648881411235250178', '5', '2023-02-14 00:00:00', '正常开展扎西绕登乡、里龙乡、卧龙镇的土地测量工作；');
INSERT INTO `cmc_project_progress` VALUES (1329, '1648881411235250178', '10', '2023-02-22 00:00:00', '正常开展扎西绕登乡、里龙乡、卧龙镇的土地测量工作；');
INSERT INTO `cmc_project_progress` VALUES (1330, '1648881411235250178', '20', '2023-03-08 00:00:00', '正常开展米林县扎西绕登乡、里龙乡、卧龙镇、朗县洞嘎镇的土地测量工作；');
INSERT INTO `cmc_project_progress` VALUES (1331, '1648881411235250178', '40', '2023-03-29 00:00:00', '正常开展米林县扎西绕登乡、里龙乡、卧龙镇、朗县朗镇的土地测量工作；');
INSERT INTO `cmc_project_progress` VALUES (1332, '1648881411235250178', '50', '2023-04-17 00:00:00', '正常开展ML的土地测量工作，已开始启动JW的土地测量工作；');
INSERT INTO `cmc_project_progress` VALUES (1333, '1648881411235250178', '55', '2023-05-06 00:00:00', '开展ML确认签字工作，正在开展JW的调查工作；');
INSERT INTO `cmc_project_progress` VALUES (1334, '1648881411235250178', '60', '2023-05-20 00:00:00', '正常开展JW的调查工作，ML库区调查结果的数据汇总工作；');
INSERT INTO `cmc_project_progress` VALUES (1335, '1648881411235250178', '65', '2023-06-10 00:00:00', '开展ML公示工作；开展JW的调查工作；');
INSERT INTO `cmc_project_progress` VALUES (1336, '1648881411235250178', '70', '2023-07-05 00:00:00', '开展ML公示工作；开展JW公示工作；');
INSERT INTO `cmc_project_progress` VALUES (1337, '1648881411235250178', '75', '2023-08-20 00:00:00', '基本完成ML、JW个人公示工作；进行初步成果资料汇总工作；');
INSERT INTO `cmc_project_progress` VALUES (1338, '1648881411235250178', '80', '2023-09-01 00:00:00', '进行纸质文档整理工作、辅助参与遗漏问题解决工作；');
INSERT INTO `cmc_project_progress` VALUES (1339, '1648881411235250178', '85', '2023-10-30 00:00:00', '进行争议地处理工作；重点村组突击工作；');
INSERT INTO `cmc_project_progress` VALUES (1340, '1648881411218472961', '30', '2023-02-07 00:00:00', '完成外业飞行和数据采集');
INSERT INTO `cmc_project_progress` VALUES (1341, '1648881411218472961', '90', '2023-02-15 00:00:00', '完成内业编图和一查');
INSERT INTO `cmc_project_progress` VALUES (1342, '1648881411218472961', '100', '2023-02-17 00:00:00', '二查完成，资料提交');
INSERT INTO `cmc_project_progress` VALUES (1343, '1648881411201695745', '80', '2023-02-18 00:00:00', '仅剩余水下地形图测绘');
INSERT INTO `cmc_project_progress` VALUES (1344, '1648881411201695745', '100', '2023-02-24 00:00:00', '完成水下地形测绘');
INSERT INTO `cmc_project_progress` VALUES (1345, '1648881411184918529', '20', '2023-02-08 00:00:00', '3块确认区域地形图测绘');
INSERT INTO `cmc_project_progress` VALUES (1346, '1648881411184918529', '40', '2023-02-09 00:00:00', '3块确认区域地形图测绘');
INSERT INTO `cmc_project_progress` VALUES (1347, '1648881411184918529', '80', '2023-02-14 00:00:00', '一查，二查');
INSERT INTO `cmc_project_progress` VALUES (1348, '1648881411184918529', '90', '2023-02-15 00:00:00', '地形图成果提交');
INSERT INTO `cmc_project_progress` VALUES (1349, '1648881411184918529', '100', '2023-02-17 00:00:00', '公园业主位置标记和测绘，全部成果提交');
INSERT INTO `cmc_project_progress` VALUES (1350, '1648881411159752705', '30', '2023-02-18 00:00:00', '数据采集，外业调绘，像控点测量');
INSERT INTO `cmc_project_progress` VALUES (1351, '1648881411159752705', '50', '2023-02-19 00:00:00', '八窝龙平面控制GNSS测量，八窝龙平面控制GNSS测量，尼呷平面控制GNSS测量');
INSERT INTO `cmc_project_progress` VALUES (1352, '1648881411159752705', '70', '2023-02-20 00:00:00', '点云分类，空三建模，地形图编绘');
INSERT INTO `cmc_project_progress` VALUES (1353, '1648881411159752705', '100', '2023-02-23 00:00:00', '完成质检和成果提交');
INSERT INTO `cmc_project_progress` VALUES (1354, '1648881411138781190', '30', '2023-10-28 00:00:00', '加密');
INSERT INTO `cmc_project_progress` VALUES (1355, '1648881411138781190', '40', '2023-10-29 00:00:00', '地形图缩编');
INSERT INTO `cmc_project_progress` VALUES (1356, '1648881411138781190', '100', '2023-11-01 00:00:00', '资用资料提交');
INSERT INTO `cmc_project_progress` VALUES (1357, '1648881411138781189', '50', '2023-12-29 00:00:00', '外业航飞、像控、检查点测量结束');
INSERT INTO `cmc_project_progress` VALUES (1358, '1648881411138781189', '100', '2024-01-04 00:00:00', '已提交成果');
INSERT INTO `cmc_project_progress` VALUES (1359, '1648881411138781188', '50', '2023-12-25 00:00:00', '完成全部外业数据采集工作。');
INSERT INTO `cmc_project_progress` VALUES (1360, '1648881411138781188', '100', '2024-01-15 00:00:00', '完成全部内业工作，将资料交付甲方。');
INSERT INTO `cmc_project_progress` VALUES (1361, '1648881411138781187', '30', '2023-12-27 00:00:00', '外业已进场采集');
INSERT INTO `cmc_project_progress` VALUES (1362, '1648881411138781187', '100', '2024-01-12 00:00:00', '正式成果已提交');
INSERT INTO `cmc_project_progress` VALUES (1363, '1648881411138781186', '10', '2023-05-24 00:00:00', '控制测量');
INSERT INTO `cmc_project_progress` VALUES (1364, '1648881411138781186', '30', '2023-05-26 00:00:00', '航飞采集完成');
INSERT INTO `cmc_project_progress` VALUES (1365, '1648881411138781186', '40', '2023-05-28 00:00:00', '外业调绘、检查点');
INSERT INTO `cmc_project_progress` VALUES (1366, '1648881411138781186', '90', '2023-06-01 00:00:00', '2000,5000地形图提交');
INSERT INTO `cmc_project_progress` VALUES (1367, '1648881411138781186', '90', '2023-06-05 00:00:00', '断面成果提交');
INSERT INTO `cmc_project_progress` VALUES (1368, '1648881411138781186', '100', '2023-06-06 00:00:00', '三维地形面提交');
INSERT INTO `cmc_project_progress` VALUES (1369, '1648881411122003970', '40', '2023-02-21 00:00:00', '外业数据采集，控制和现场调绘');
INSERT INTO `cmc_project_progress` VALUES (1370, '1648881411122003970', '90', '2023-03-06 00:00:00', '完成并提交5000地形图和2000地形地类图');
INSERT INTO `cmc_project_progress` VALUES (1371, '1648881411122003970', '100', '2023-03-09 00:00:00', '三维地形面提交，三条断面成果已提交');
INSERT INTO `cmc_project_progress` VALUES (1372, '1648881411105226753', '0', '2023-02-09 00:00:00', '项目进场');
INSERT INTO `cmc_project_progress` VALUES (1373, '1648881411105226753', '10', '2023-02-11 00:00:00', '控制测量');
INSERT INTO `cmc_project_progress` VALUES (1374, '1648881411105226753', '10', '2023-02-12 00:00:00', '天气原因无法飞行，撤场等待天气好转再进场飞行');
INSERT INTO `cmc_project_progress` VALUES (1375, '1648881411105226753', '10', '2023-02-14 00:00:00', '飞行进场');
INSERT INTO `cmc_project_progress` VALUES (1376, '1648881411105226753', '10', '2023-02-15 00:00:00', '河道纵断面测量');
INSERT INTO `cmc_project_progress` VALUES (1377, '1648881411105226753', '20', '2023-02-19 00:00:00', '飞行采集下库激光数据');
INSERT INTO `cmc_project_progress` VALUES (1378, '1648881411105226753', '30', '2023-02-22 00:00:00', '提交业主上下库资用图');
INSERT INTO `cmc_project_progress` VALUES (1379, '1648881411105226753', '40', '2023-02-24 00:00:00', '激光采集剩余区域数据');
INSERT INTO `cmc_project_progress` VALUES (1380, '1648881411105226753', '100', '2023-03-01 00:00:00', '资用成果');
INSERT INTO `cmc_project_progress` VALUES (1381, '1648881411084255234', '100', '2023-03-14 00:00:00', '三维地形面');
INSERT INTO `cmc_project_progress` VALUES (1382, '1648881411084255234', '100', '2023-03-13 00:00:00', '地形图');
INSERT INTO `cmc_project_progress` VALUES (1383, '1648881411067478017', '10', '2023-03-25 00:00:00', '开展断面基点及指示桩、GNSS控制点埋设、机动船手续办理等');
INSERT INTO `cmc_project_progress` VALUES (1384, '1648881411067478017', '30', '2023-04-25 00:00:00', '完成断面基点及指示桩选埋共214点、GNSS控制点选埋共65点');
INSERT INTO `cmc_project_progress` VALUES (1385, '1648881411067478017', '40', '2024-01-15 00:00:00', '庆大沟、鲜水河高程控制测量');
INSERT INTO `cmc_project_progress` VALUES (1386, '1648881411050700802', '30', '2023-02-21 00:00:00', '矢量化');
INSERT INTO `cmc_project_progress` VALUES (1387, '1648881411050700802', '50', '2023-02-23 00:00:00', '飞行采集完成');
INSERT INTO `cmc_project_progress` VALUES (1388, '1648881411050700802', '100', '2023-03-01 00:00:00', '完成数据');
INSERT INTO `cmc_project_progress` VALUES (1389, '1648881411033923585', '80', '2023-02-13 00:00:00', '外业工作完成');
INSERT INTO `cmc_project_progress` VALUES (1390, '1648881411033923585', '100', '2023-02-18 00:00:00', '资料提交，全部工作完成');
INSERT INTO `cmc_project_progress` VALUES (1391, '1648881411017146369', '10', '2023-03-01 00:00:00', '进场开始断面测量');
INSERT INTO `cmc_project_progress` VALUES (1392, '1648881411017146369', '30', '2023-03-05 00:00:00', '完成约30%');
INSERT INTO `cmc_project_progress` VALUES (1393, '1648881411017146369', '80', '2023-03-11 00:00:00', '完成约80%');
INSERT INTO `cmc_project_progress` VALUES (1394, '1648881411017146369', '90', '2023-03-13 00:00:00', '完成外业测量工作');
INSERT INTO `cmc_project_progress` VALUES (1395, '1648881411017146369', '100', '2023-03-14 00:00:00', '提交资料');
INSERT INTO `cmc_project_progress` VALUES (1396, '1648881411000369153', '100', '2023-03-13 00:00:00', '水下外业测量');
INSERT INTO `cmc_project_progress` VALUES (1397, '1648881411000369153', '100', '2023-03-13 00:00:00', '水边线测量');
INSERT INTO `cmc_project_progress` VALUES (1398, '1648881410979397634', '20', '2023-02-23 00:00:00', '人民中路，青羊坊绿地，金家坝，江汉路洛阳路口');
INSERT INTO `cmc_project_progress` VALUES (1399, '1648881410979397634', '60', '2023-02-24 00:00:00', '完成清江中路，羊市街，天遇酒店，苏坡立交旁空地等外业扫描');
INSERT INTO `cmc_project_progress` VALUES (1400, '1648881410979397634', '70', '2023-02-25 00:00:00', '完成所有点位外业数据采集，并完成部分点位立面平面图');
INSERT INTO `cmc_project_progress` VALUES (1401, '1648881410979397634', '90', '2023-02-28 00:00:00', '完成补充扫描外业数据采集，并完成大部分点位立面图');
INSERT INTO `cmc_project_progress` VALUES (1402, '1648881410979397634', '99', '2023-03-03 00:00:00', '完成所有计划任务和新增任务，并已提交成果，目前正在沟通是否新增点位');
INSERT INTO `cmc_project_progress` VALUES (1403, '1648881410979397634', '100', '2023-03-09 00:00:00', '完成所有任务，提交成果');
INSERT INTO `cmc_project_progress` VALUES (1404, '1648881410962620417', '50', '2023-02-23 00:00:00', '完成控制测量和无人机航飞');
INSERT INTO `cmc_project_progress` VALUES (1405, '1648881410962620417', '100', '2023-03-04 00:00:00', '航飞');
INSERT INTO `cmc_project_progress` VALUES (1406, '1648881410962620417', '100', '2023-04-01 00:00:00', '控制');
INSERT INTO `cmc_project_progress` VALUES (1407, '1648881410962620417', '100', '2023-03-28 00:00:00', '调绘');
INSERT INTO `cmc_project_progress` VALUES (1408, '1648881410945843202', '10', '2023-02-21 00:00:00', '完成牙根配合测绘工作任务');
INSERT INTO `cmc_project_progress` VALUES (1409, '1648881410945843202', '40', '2023-03-01 00:00:00', '完成对外公路更新任务');
INSERT INTO `cmc_project_progress` VALUES (1410, '1648881410945843202', '60', '2023-03-16 00:00:00', '完成大部分地形图测绘单项任务');
INSERT INTO `cmc_project_progress` VALUES (1411, '1648881410945843202', '70', '2023-03-24 00:00:00', '完成外业测绘工作');
INSERT INTO `cmc_project_progress` VALUES (1412, '1648881410945843202', '80', '2023-04-24 00:00:00', '完成部分内业地形图');
INSERT INTO `cmc_project_progress` VALUES (1413, '1648881410945843202', '100', '2023-05-10 00:00:00', '资料完全提交');
INSERT INTO `cmc_project_progress` VALUES (1414, '1648881410929065985', '0', '2023-02-27 00:00:00', '飞行进场');
INSERT INTO `cmc_project_progress` VALUES (1415, '1648881410929065985', '10', '2023-02-28 00:00:00', '飞行数据采集');
INSERT INTO `cmc_project_progress` VALUES (1416, '1648881410929065985', '20', '2023-03-06 00:00:00', '内业数据处理');
INSERT INTO `cmc_project_progress` VALUES (1417, '1648881410929065985', '100', '2023-03-08 00:00:00', '资用成果提交');
INSERT INTO `cmc_project_progress` VALUES (1418, '1648881410912288769', '40', '2023-02-27 00:00:00', '完成外业数据采集');
INSERT INTO `cmc_project_progress` VALUES (1419, '1648881410912288769', '60', '2023-03-08 00:00:00', '完成资用地形草图，并已提交设总，今日进行水下测量');
INSERT INTO `cmc_project_progress` VALUES (1420, '1648881410912288769', '90', '2023-03-16 00:00:00', '正式图已提交');
INSERT INTO `cmc_project_progress` VALUES (1421, '1648881410912288769', '100', '2023-03-20 00:00:00', '三维地形面已提交');
INSERT INTO `cmc_project_progress` VALUES (1422, '1648881410899705858', '20', '2023-04-05 00:00:00', '完成现场踏勘及界桩预制工作');
INSERT INTO `cmc_project_progress` VALUES (1423, '1648881410899705858', '100', '2023-04-25 00:00:00', '完成界桩埋设工作，并现场移交界桩成果');
INSERT INTO `cmc_project_progress` VALUES (1424, '1648881410878734337', '30', '2023-03-21 00:00:00', '完成影像数据采集');
INSERT INTO `cmc_project_progress` VALUES (1425, '1648881410878734337', '50', '2023-03-26 00:00:00', '完成水下地形数据采集');
INSERT INTO `cmc_project_progress` VALUES (1426, '1648881410878734337', '80', '2023-03-29 00:00:00', '完成断面基点选埋、断面测量、同时水面线测量、高程联测');
INSERT INTO `cmc_project_progress` VALUES (1427, '1648881410878734337', '100', '2023-04-04 00:00:00', '提交正式资料');
INSERT INTO `cmc_project_progress` VALUES (1428, '1648881410866151425', '20', '2023-03-11 00:00:00', '卫片空三加密');
INSERT INTO `cmc_project_progress` VALUES (1429, '1648881410866151425', '80', '2023-03-23 00:00:00', '提交5000资用图');
INSERT INTO `cmc_project_progress` VALUES (1430, '1648881410866151425', '90', '2023-05-23 00:00:00', '1000,2000资用图提交');
INSERT INTO `cmc_project_progress` VALUES (1431, '1648881410866151425', '100', '2023-06-09 00:00:00', '新增5000资料提交');
INSERT INTO `cmc_project_progress` VALUES (1432, '1648881410849374209', '20', '2023-03-06 00:00:00', '航飞采集完成');
INSERT INTO `cmc_project_progress` VALUES (1433, '1648881410849374209', '50', '2023-03-09 00:00:00', '点云分类完成，地物采集完成，外业调绘进场');
INSERT INTO `cmc_project_progress` VALUES (1434, '1648881410849374209', '100', '2023-03-13 00:00:00', '外调完成，资用图提交');
INSERT INTO `cmc_project_progress` VALUES (1435, '1648881410832596993', '60', '2023-03-14 00:00:00', '完成航飞，资用图');
INSERT INTO `cmc_project_progress` VALUES (1436, '1648881410832596993', '70', '2023-03-15 00:00:00', '控制点选埋');
INSERT INTO `cmc_project_progress` VALUES (1437, '1648881410832596993', '90', '2023-03-29 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1438, '1648881410832596993', '100', '2023-03-31 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1439, '1648881410815819777', '20', '2023-03-05 00:00:00', '完成控制测量');
INSERT INTO `cmc_project_progress` VALUES (1440, '1648881410815819777', '30', '2023-03-07 00:00:00', '水下作业人员进场');
INSERT INTO `cmc_project_progress` VALUES (1441, '1648881410815819777', '50', '2023-03-08 00:00:00', '完成水下地形外业采集，外业撤场');
INSERT INTO `cmc_project_progress` VALUES (1442, '1648881410815819777', '60', '2023-03-11 00:00:00', '完成水下地形图内业编辑');
INSERT INTO `cmc_project_progress` VALUES (1443, '1648881410815819777', '80', '2023-03-13 00:00:00', '完成业主营地、承包商1#营地、承包商2#营地地形图测绘内业编辑');
INSERT INTO `cmc_project_progress` VALUES (1444, '1648881410815819777', '100', '2023-03-15 00:00:00', '提交正式成果给业主');
INSERT INTO `cmc_project_progress` VALUES (1445, '1648881410790653953', '0', '2023-03-13 00:00:00', '原计划外业出发日期，因飞机问题暂停');
INSERT INTO `cmc_project_progress` VALUES (1446, '1648881410790653953', '0', '2023-03-15 00:00:00', '协调完成，外业出发');
INSERT INTO `cmc_project_progress` VALUES (1447, '1648881410790653953', '30', '2023-03-21 00:00:00', '外业工作完成、返回，数据整理');
INSERT INTO `cmc_project_progress` VALUES (1448, '1648881410790653953', '35', '2023-03-23 00:00:00', 'POS精度偏低，厘清数据情况');
INSERT INTO `cmc_project_progress` VALUES (1449, '1648881410790653953', '35', '2023-03-24 00:00:00', '各种分区块空三效果尝试');
INSERT INTO `cmc_project_progress` VALUES (1450, '1648881410790653953', '70', '2023-03-31 00:00:00', '空三基本完成，准备建模');
INSERT INTO `cmc_project_progress` VALUES (1451, '1648881410790653953', '80', '2023-04-06 00:00:00', '建模基本完成，准备修模');
INSERT INTO `cmc_project_progress` VALUES (1452, '1648881410790653953', '85', '2023-04-09 00:00:00', '修模基本完成，准备整理数据');
INSERT INTO `cmc_project_progress` VALUES (1453, '1648881410790653953', '90', '2023-04-10 00:00:00', '整理完成，准备提交模型成果');
INSERT INTO `cmc_project_progress` VALUES (1454, '1648881410790653953', '90', '2023-04-10 00:00:00', '开始资料编写');
INSERT INTO `cmc_project_progress` VALUES (1455, '1648881410790653953', '95', '2023-04-21 00:00:00', '增加工作：地质王宇航提出增加正射影像');
INSERT INTO `cmc_project_progress` VALUES (1456, '1648881410790653953', '100', '2023-04-26 00:00:00', '增加的正射影像提交到技术质量部');
INSERT INTO `cmc_project_progress` VALUES (1457, '1648881410778071042', '3', '2023-03-20 00:00:00', '前期准备工作，空域申请、电子沙盘基础数据等');
INSERT INTO `cmc_project_progress` VALUES (1458, '1648881410778071042', '5', '2023-04-03 00:00:00', '外业项目进场');
INSERT INTO `cmc_project_progress` VALUES (1459, '1648881410778071042', '7', '2023-04-07 00:00:00', '米林村第一次测试数据返回');
INSERT INTO `cmc_project_progress` VALUES (1460, '1648881410778071042', '8', '2023-04-21 00:00:00', '米林村第二次测试数据返回');
INSERT INTO `cmc_project_progress` VALUES (1461, '1648881410778071042', '15', '2023-04-26 00:00:00', '航测遥感中心提供库区DEM成果');
INSERT INTO `cmc_project_progress` VALUES (1462, '1648881410778071042', '20', '2023-04-28 00:00:00', '第一批航飞数据返回');
INSERT INTO `cmc_project_progress` VALUES (1463, '1648881410778071042', '40', '2023-06-07 00:00:00', 'ML项目部组织沟通交流会，提出要求与新增范围');
INSERT INTO `cmc_project_progress` VALUES (1464, '1648881410778071042', '50', '2023-07-06 00:00:00', '航测遥感中心重新提供范围变更后库区DEM成果');
INSERT INTO `cmc_project_progress` VALUES (1465, '1648881410778071042', '51', '2023-07-08 00:00:00', '测绘工程中心重新提供范围变更后库区DOM成果');
INSERT INTO `cmc_project_progress` VALUES (1466, '1648881410778071042', '60', '2023-07-11 00:00:00', '重新提交范围变更后电子沙盘成果');
INSERT INTO `cmc_project_progress` VALUES (1467, '1648881410778071042', '70', '2023-07-31 00:00:00', '已有所有数据实景三维模型建模完成，开始基础修饰工作');
INSERT INTO `cmc_project_progress` VALUES (1468, '1648881410778071042', '90', '2023-08-18 00:00:00', '实景三维模型基础修饰已完成');
INSERT INTO `cmc_project_progress` VALUES (1469, '1648881410778071042', '90', '2023-09-04 00:00:00', 'ML项目部组织沟通会');
INSERT INTO `cmc_project_progress` VALUES (1470, '1648881410778071042', '91', '2023-09-07 00:00:00', '20230904会后地质专业提供要求增加的范围');
INSERT INTO `cmc_project_progress` VALUES (1471, '1648881410778071042', '91', '2023-10-29 00:00:00', '地质专业要求增加范围后激光技术中心飞行组进场');
INSERT INTO `cmc_project_progress` VALUES (1472, '1648881410778071042', '92', '2023-11-15 00:00:00', '飞行影像提供到地理信息中心，开始自由网空三');
INSERT INTO `cmc_project_progress` VALUES (1473, '1648881410778071042', '92', '2023-11-22 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1474, '1648881410761293825', '100', '2023-04-12 00:00:00', '土建工作完成（黄安堂、彭永红、雷光泽4月12日离场）');
INSERT INTO `cmc_project_progress` VALUES (1475, '1648881410761293825', '100', '2023-08-11 00:00:00', '观测进场（黄安堂、李学勇、赵永来，9月23日离场）');
INSERT INTO `cmc_project_progress` VALUES (1476, '1648881410744516610', '80', '2023-03-20 00:00:00', '外业工作结束');
INSERT INTO `cmc_project_progress` VALUES (1477, '1648881410744516610', '100', '2023-04-20 00:00:00', '项目结束');
INSERT INTO `cmc_project_progress` VALUES (1478, '1648881410727739393', '100', '2023-04-05 00:00:00', '完成外业航飞数据采集');
INSERT INTO `cmc_project_progress` VALUES (1479, '1648881410727739393', '100', '2023-04-05 00:00:00', '完成静态观测');
INSERT INTO `cmc_project_progress` VALUES (1480, '1648881410727739393', '100', '2023-04-06 00:00:00', '数据上交');
INSERT INTO `cmc_project_progress` VALUES (1481, '1648881410710962177', '10', '2023-04-06 00:00:00', '项目进场，开展像控点测量工作；');
INSERT INTO `cmc_project_progress` VALUES (1482, '1648881410710962177', '50', '2023-04-07 00:00:00', '完成无人机飞行；');
INSERT INTO `cmc_project_progress` VALUES (1483, '1648881410710962177', '80', '2023-04-08 00:00:00', '完成全部外业调绘工作；');
INSERT INTO `cmc_project_progress` VALUES (1484, '1648881410710962177', '100', '2023-04-10 00:00:00', '将资用成果资料交付甲方。');
INSERT INTO `cmc_project_progress` VALUES (1485, '1648881410694184962', '30', '2023-03-27 00:00:00', '完成控制，采集完成60%');
INSERT INTO `cmc_project_progress` VALUES (1486, '1648881410694184962', '60', '2023-03-30 00:00:00', '完成数据采集、外业调绘');
INSERT INTO `cmc_project_progress` VALUES (1487, '1648881410694184962', '80', '2023-04-04 00:00:00', '完成1:2000范围地形图');
INSERT INTO `cmc_project_progress` VALUES (1488, '1648881410694184962', '100', '2023-04-07 00:00:00', '完成地形图成果，提交业主');
INSERT INTO `cmc_project_progress` VALUES (1489, '1648881410677407746', '100', '2023-03-26 00:00:00', '完成采集，提交成果');
INSERT INTO `cmc_project_progress` VALUES (1490, '1648881410660630529', '20', '2023-04-05 00:00:00', '完成航飞');
INSERT INTO `cmc_project_progress` VALUES (1491, '1648881410660630529', '30', '2023-04-06 00:00:00', '完成五等GNSS点');
INSERT INTO `cmc_project_progress` VALUES (1492, '1648881410660630529', '80', '2023-04-14 00:00:00', '完成外业调绘');
INSERT INTO `cmc_project_progress` VALUES (1493, '1648881410660630529', '100', '2023-04-22 00:00:00', '22日提交成果');
INSERT INTO `cmc_project_progress` VALUES (1494, '1648881410643853314', '3', '2023-04-11 00:00:00', '完成两个口袋公园地形图、树、断面测量');
INSERT INTO `cmc_project_progress` VALUES (1495, '1648881410643853314', '10', '2023-04-18 00:00:00', '完成内河湿地公园地形图测绘');
INSERT INTO `cmc_project_progress` VALUES (1496, '1648881410643853314', '20', '2023-04-30 00:00:00', '完成内河湿地公园、水网工程');
INSERT INTO `cmc_project_progress` VALUES (1497, '1648881410643853314', '30', '2022-04-30 00:00:00', '完成水源地航飞');
INSERT INTO `cmc_project_progress` VALUES (1498, '1648881410643853314', '40', '2023-05-03 00:00:00', '完成水网工程断面提交');
INSERT INTO `cmc_project_progress` VALUES (1499, '1648881410643853314', '50', '2023-05-10 00:00:00', '完成水源地资用图提交');
INSERT INTO `cmc_project_progress` VALUES (1500, '1648881410643853314', '60', '2023-05-22 00:00:00', '完成聂当航飞');
INSERT INTO `cmc_project_progress` VALUES (1501, '1648881410643853314', '70', '2023-05-26 00:00:00', '提交聂当堤防及生态堰左右100米范围内1:1000地形图（资用）');
INSERT INTO `cmc_project_progress` VALUES (1502, '1648881410643853314', '80', '2023-05-31 00:00:00', '提交聂当1:2000地形图（资用）及断面（资用）');
INSERT INTO `cmc_project_progress` VALUES (1503, '1648881410643853314', '85', '2023-06-02 00:00:00', '提交水源地1:1000地形图（含水下）正式图');
INSERT INTO `cmc_project_progress` VALUES (1504, '1648881410643853314', '90', '2023-06-10 00:00:00', '天辰撤场');
INSERT INTO `cmc_project_progress` VALUES (1505, '1648881410643853314', '100', '2023-06-21 00:00:00', '完成全部资料提交');
INSERT INTO `cmc_project_progress` VALUES (1506, '1648881410631270464', '40', '2024-05-11 00:00:00', '一期外业工作结束，开展内业资料整编工作。');
INSERT INTO `cmc_project_progress` VALUES (1507, '1648881410631270464', '50', '2024-05-21 00:00:00', '一期成果资料提交');
INSERT INTO `cmc_project_progress` VALUES (1508, '1648881410631270463', '90', '2024-06-14 00:00:00', '外业结束');
INSERT INTO `cmc_project_progress` VALUES (1509, '1648881410631270463', '100', '2024-06-18 00:00:00', '资料提交');
INSERT INTO `cmc_project_progress` VALUES (1510, '1648881410631270462', '90', '2024-06-04 00:00:00', '勘察外业工作已结束，勘察报告由于设计构筑物特性概况在整理中，暂未提供，勘察报告完整出具');
INSERT INTO `cmc_project_progress` VALUES (1511, '1648881410631270461', '20', '2024-04-30 00:00:00', '完成3、4月数据采集分析');
INSERT INTO `cmc_project_progress` VALUES (1512, '1648881410631270460', '10', '2024-04-30 00:00:00', '完成G349水准点埋设，开展G349水准联测');
INSERT INTO `cmc_project_progress` VALUES (1513, '1648881410631270460', '30', '2024-05-12 00:00:00', '导水槽土建施工完成');
INSERT INTO `cmc_project_progress` VALUES (1514, '1648881410631270460', '40', '2024-05-17 00:00:00', 'G349水准联测完成');
INSERT INTO `cmc_project_progress` VALUES (1515, '1648881410631270460', '70', '2024-06-12 00:00:00', '羊湖监测控制网水准测量完成');
INSERT INTO `cmc_project_progress` VALUES (1516, '1648881410631270454', '30', '2024-04-15 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1517, '1648881410631270453', '40', '2024-03-22 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1518, '1648881410631270452', '30', '2024-01-24 00:00:00', '控制测量已完成');
INSERT INTO `cmc_project_progress` VALUES (1519, '1648881410631270452', '90', '2024-02-03 00:00:00', '外业结束');
INSERT INTO `cmc_project_progress` VALUES (1520, '1648881410631270452', '100', '2024-02-26 00:00:00', '地形图成果已提交');
INSERT INTO `cmc_project_progress` VALUES (1521, '1648881410631270451', '20', '2024-01-13 00:00:00', '完成秀山县60%区块数据采集和像控点检查点测量');
INSERT INTO `cmc_project_progress` VALUES (1522, '1648881410631270451', '40', '2024-03-05 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1523, '1648881410631270451', '60', '2024-03-12 00:00:00', '完成武隆区数据采集');
INSERT INTO `cmc_project_progress` VALUES (1524, '1648881410631270451', '80', '2024-03-22 00:00:00', '完成黔江区数据采集，完成秀山县、武隆区三维建模');
INSERT INTO `cmc_project_progress` VALUES (1525, '1648881410631270451', '100', '2024-03-31 00:00:00', '粗模提交');
INSERT INTO `cmc_project_progress` VALUES (1526, '1648881410631270449', '70', '2024-06-17 00:00:00', '完成厂区1：1000地形图、交通1:2000带状地形图航飞检查点工作');
INSERT INTO `cmc_project_progress` VALUES (1527, '1648881410631270447', '100', '2024-05-23 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1528, '1648881410631270446', '50', '2024-05-31 00:00:00', '完成中山园全部外业工作及高山园部分外业工作');
INSERT INTO `cmc_project_progress` VALUES (1529, '1648881410631270446', '80', '2024-06-03 00:00:00', '完成全部外业工作');
INSERT INTO `cmc_project_progress` VALUES (1530, '1648881410631270446', '100', '2024-06-14 00:00:00', '提交成果给甲方');
INSERT INTO `cmc_project_progress` VALUES (1531, '1648881410631270444', '10', '2024-05-09 00:00:00', '完成丘河汇口段视频拍摄');
INSERT INTO `cmc_project_progress` VALUES (1532, '1648881410631270444', '50', '2024-05-16 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1533, '1648881410631270444', '80', '2024-05-19 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1534, '1648881410631270444', '100', '2024-05-21 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1535, '1648881410631270443', '50', '2024-05-14 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1536, '1648881410631270443', '95', '2024-05-23 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1537, '1648881410631270443', '100', '2024-05-24 00:00:00', '提交时间已与业主沟通');
INSERT INTO `cmc_project_progress` VALUES (1538, '1648881410631270441', '60', '2024-05-05 00:00:00', '激光数据采集及外业工作完成，内业生产中');
INSERT INTO `cmc_project_progress` VALUES (1539, '1648881410631270441', '100', '2024-05-08 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1540, '1648881410631270440', '60', '2024-04-30 00:00:00', '完成外业工作');
INSERT INTO `cmc_project_progress` VALUES (1541, '1648881410631270440', '100', '2024-05-07 00:00:00', '成果提交业主');
INSERT INTO `cmc_project_progress` VALUES (1542, '1648881410631270439', '0', '2024-04-10 00:00:00', '外业进场');
INSERT INTO `cmc_project_progress` VALUES (1543, '1648881410631270439', '20', '2024-04-19 00:00:00', '完成控制测量、像控点测量');
INSERT INTO `cmc_project_progress` VALUES (1544, '1648881410631270439', '60', '2024-04-28 00:00:00', '完成数据采集、外业调绘');
INSERT INTO `cmc_project_progress` VALUES (1545, '1648881410631270439', '100', '2024-05-06 00:00:00', '提交成果');
INSERT INTO `cmc_project_progress` VALUES (1546, '1648881410631270438', '10', '2024-04-18 00:00:00', '完成现场配合踏勘');
INSERT INTO `cmc_project_progress` VALUES (1547, '1648881410631270438', '30', '2024-04-22 00:00:00', '完成中桩放样9km及断面测量');
INSERT INTO `cmc_project_progress` VALUES (1548, '1648881410631270438', '40', '2024-04-24 00:00:00', '完成中桩放样11km及断面测量');
INSERT INTO `cmc_project_progress` VALUES (1549, '1648881410631270438', '50', '2024-04-27 00:00:00', '完成中桩放样、断面测量、地形图测绘，剩余控制测量');
INSERT INTO `cmc_project_progress` VALUES (1550, '1648881410631270438', '60', '2024-05-06 00:00:00', '完成控制点选埋');
INSERT INTO `cmc_project_progress` VALUES (1551, '1648881410631270438', '80', '2024-05-20 00:00:00', '完成控制点平面观测、60%水准测量');
INSERT INTO `cmc_project_progress` VALUES (1552, '1648881410631270438', '100', '2024-05-28 00:00:00', '完成控制成果提交');
INSERT INTO `cmc_project_progress` VALUES (1553, '1648881410631270437', '10', '2024-04-03 00:00:00', '与业主现场选定标识牌埋设位置、物流标识牌到达现场');
INSERT INTO `cmc_project_progress` VALUES (1554, '1648881410631270437', '90', '2024-04-08 00:00:00', '标识牌埋设及现场点位移交');
INSERT INTO `cmc_project_progress` VALUES (1555, '1648881410631270437', '100', '2024-04-09 00:00:00', '业主点位签收，撤场');
INSERT INTO `cmc_project_progress` VALUES (1556, '1648881410631270436', '1', '2024-04-07 00:00:00', '从成都进场林芝市；');
INSERT INTO `cmc_project_progress` VALUES (1557, '1648881410631270436', '1', '2024-04-08 00:00:00', '扎墨发生雪崩，返回林芝开展航拍工作；');
INSERT INTO `cmc_project_progress` VALUES (1558, '1648881410631270436', '30', '2024-04-16 00:00:00', '完成雅江段、汗密段测量工作；');
INSERT INTO `cmc_project_progress` VALUES (1559, '1648881410631270436', '50', '2024-04-25 00:00:00', '完成第一期全部外业工作，人员撤回米林市；');
INSERT INTO `cmc_project_progress` VALUES (1560, '1648881410631270435', '20', '2024-03-24 00:00:00', '完成控制点埋设');
INSERT INTO `cmc_project_progress` VALUES (1561, '1648881410631270435', '50', '2024-03-30 00:00:00', '外业测量组工作完成、剩余航飞数据采集工作');
INSERT INTO `cmc_project_progress` VALUES (1562, '1648881410631270435', '70', '2024-04-03 00:00:00', '航飞数据采集结束');
INSERT INTO `cmc_project_progress` VALUES (1563, '1648881410631270435', '100', '2024-04-15 00:00:00', '提交地形图及控制成果');
INSERT INTO `cmc_project_progress` VALUES (1564, '1648881410631270434', '70', '2024-03-30 00:00:00', '外业工作结束，撤场');
INSERT INTO `cmc_project_progress` VALUES (1565, '1648881410631270434', '100', '2024-04-03 00:00:00', '提交正式图');
INSERT INTO `cmc_project_progress` VALUES (1566, '1648881410631270433', '50', '2024-03-14 00:00:00', '完成热足电站外业测量工作；');
INSERT INTO `cmc_project_progress` VALUES (1567, '1648881410631270433', '80', '2024-03-16 00:00:00', '完成松岗电站外业测量工作；');
INSERT INTO `cmc_project_progress` VALUES (1568, '1648881410631270433', '100', '2024-03-27 00:00:00', '将资用成果交付甲方。');
INSERT INTO `cmc_project_progress` VALUES (1569, '1648881410631270432', '30', '2024-03-21 00:00:00', '完成卫片像控点测量');
INSERT INTO `cmc_project_progress` VALUES (1570, '1648881410631270432', '80', '2024-03-25 00:00:00', '完成检查点测量、调绘工作');
INSERT INTO `cmc_project_progress` VALUES (1571, '1648881410631270432', '100', '2024-04-01 00:00:00', '已提交资用图');
INSERT INTO `cmc_project_progress` VALUES (1572, '1648881410631270431', '50', '2024-02-29 00:00:00', '提交土地整理区1:1000地形地类图、完成引水线路1:1000地形地类图航飞及外业工作');
INSERT INTO `cmc_project_progress` VALUES (1573, '1648881410631270431', '100', '2024-03-21 00:00:00', '提交正式成果');
INSERT INTO `cmc_project_progress` VALUES (1574, '1648881410631270430', '70', '2024-03-02 00:00:00', '外业测量结束');
INSERT INTO `cmc_project_progress` VALUES (1575, '1648881410631270430', '100', '2024-03-06 00:00:00', '资用资料提交');
INSERT INTO `cmc_project_progress` VALUES (1576, '1648881410631270429', '40', '2024-03-04 00:00:00', '完成居民点，公墓，部分道路范围地形图测绘，及水下地形测量。');
INSERT INTO `cmc_project_progress` VALUES (1577, '1648881410631270429', '70', '2024-03-10 00:00:00', '完成集镇、道路范围地形图测绘、控制测量。');
INSERT INTO `cmc_project_progress` VALUES (1578, '1648881410631270429', '80', '2024-03-13 00:00:00', '地形图及控制测量已经完成，临时界桩待定，项目人员已撤场。');
INSERT INTO `cmc_project_progress` VALUES (1579, '1648881410631270428', '60', '2024-01-24 00:00:00', '激光飞行');
INSERT INTO `cmc_project_progress` VALUES (1580, '1648881410631270428', '80', '2024-02-07 00:00:00', '资用图');
INSERT INTO `cmc_project_progress` VALUES (1581, '1648881410631270428', '100', '2024-03-12 00:00:00', '提交正式图');
INSERT INTO `cmc_project_progress` VALUES (1582, '1648881410631270427', '100', '2024-02-04 00:00:00', '正式资料提交');
INSERT INTO `cmc_project_progress` VALUES (1583, '1648881410631270426', '20', '2024-01-16 00:00:00', '放线');
INSERT INTO `cmc_project_progress` VALUES (1584, '1648881410631270426', '30', '2024-01-17 00:00:00', '飞行采集');
INSERT INTO `cmc_project_progress` VALUES (1585, '1648881410631270426', '100', '2024-01-30 00:00:00', '资料提交');
INSERT INTO `cmc_project_progress` VALUES (1586, '1648881410631270426', '100', '2024-03-20 00:00:00', '补图、正式资料提交');
INSERT INTO `cmc_project_progress` VALUES (1587, '1648881410631270425', '10', '2024-01-08 00:00:00', '从成都出发到达现场开展工作；');
INSERT INTO `cmc_project_progress` VALUES (1588, '1648881410631270425', '80', '2024-01-11 00:00:00', '完成全部外业工作，开始进行内业工作；');
INSERT INTO `cmc_project_progress` VALUES (1589, '1648881410631270425', '100', '2024-01-12 00:00:00', '完成全部内业工作，并返回成都。');
INSERT INTO `cmc_project_progress` VALUES (1590, '1648881410631270424', '90', '2024-01-14 00:00:00', '已提交资料给甲方');
INSERT INTO `cmc_project_progress` VALUES (1591, '1648881410631270424', '100', '2024-01-18 00:00:00', '提交正式成果资料');
INSERT INTO `cmc_project_progress` VALUES (1592, '1648881410631270423', '20', '2023-12-28 00:00:00', '完成航飞');
INSERT INTO `cmc_project_progress` VALUES (1593, '1648881410631270423', '30', '2024-01-01 00:00:00', '完成控制测量');
INSERT INTO `cmc_project_progress` VALUES (1594, '1648881410631270423', '50', '2024-01-04 00:00:00', '完成外业工作');
INSERT INTO `cmc_project_progress` VALUES (1595, '1648881410631270423', '100', '2024-01-15 00:00:00', '提交地形图及控制成果');
INSERT INTO `cmc_project_progress` VALUES (1596, '1648881410631270422', '100', '2023-12-13 00:00:00', '完成一等水准观测');
INSERT INTO `cmc_project_progress` VALUES (1597, '1648881410631270422', '100', '2023-12-24 00:00:00', '完成二等水准观测');
INSERT INTO `cmc_project_progress` VALUES (1598, '1648881410631270422', '100', '2024-01-01 00:00:00', '外业结束');
INSERT INTO `cmc_project_progress` VALUES (1599, '1648881410631270421', '30', '2023-11-29 00:00:00', '完成部分工作，已向甲方提交181万结算');
INSERT INTO `cmc_project_progress` VALUES (1600, '1648881410631270420', '10', '2023-12-25 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1601, '1648881410631270419', '0', '2023-11-14 00:00:00', '项目进场');
INSERT INTO `cmc_project_progress` VALUES (1602, '1648881410631270419', '20', '2023-11-26 00:00:00', '完成外业取样26个点');
INSERT INTO `cmc_project_progress` VALUES (1603, '1648881410631270419', '70', '2023-11-30 00:00:00', '完成外业取样95个点');
INSERT INTO `cmc_project_progress` VALUES (1604, '1648881410631270419', '90', '2023-12-07 00:00:00', '新增工作量15个样点，总样点145个，已完成130个');
INSERT INTO `cmc_project_progress` VALUES (1605, '1648881410631270419', '100', '2023-12-20 00:00:00', '外业全部完成145个样点采集工作');
INSERT INTO `cmc_project_progress` VALUES (1606, '1648881410631270418', '100', '2024-01-05 00:00:00', '土建施工结束');
INSERT INTO `cmc_project_progress` VALUES (1607, '1648881410631270418', '100', '2024-02-09 00:00:00', '试运行结束');
INSERT INTO `cmc_project_progress` VALUES (1608, '1648881410631270418', '100', '2024-04-29 00:00:00', '完成竣工验收');
INSERT INTO `cmc_project_progress` VALUES (1609, '1648881410631270417', '40', '2023-10-30 00:00:00', '10月28日完成数据采集；已完成12个测区水下地形及断面测量');
INSERT INTO `cmc_project_progress` VALUES (1610, '1648881410631270417', '60', '2023-11-03 00:00:00', '已完成17个测区水下地形及断面测量');
INSERT INTO `cmc_project_progress` VALUES (1611, '1648881410631270417', '80', '2023-11-10 00:00:00', '外业已全部完成；已提交22个测区实景三维模型+视频资料');
INSERT INTO `cmc_project_progress` VALUES (1612, '1648881410631270417', '100', '2023-12-04 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1613, '1648881410631270416', '100', '2023-11-11 00:00:00', '外业工作已完成，勘察资料已提交甲方');
INSERT INTO `cmc_project_progress` VALUES (1614, '1648881410631270415', '0', '2023-10-15 00:00:00', '采集进场');
INSERT INTO `cmc_project_progress` VALUES (1615, '1648881410631270415', '10', '2023-11-06 00:00:00', '可采集区域航飞数据采集完成，像控点量测完成');
INSERT INTO `cmc_project_progress` VALUES (1616, '1648881410631270415', '30', '2023-11-29 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1617, '1648881410631270415', '50', '2023-12-12 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1618, '1648881410631270415', '100', '2023-12-23 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1619, '1648881410631270414', '30', '2023-09-16 00:00:00', '完成像控点、检查点等地面工作');
INSERT INTO `cmc_project_progress` VALUES (1620, '1648881410631270414', '60', '2023-09-21 00:00:00', '完成无人机摄影测量等全部外业工作，开始地形图测绘');
INSERT INTO `cmc_project_progress` VALUES (1621, '1648881410631270414', '100', '2023-09-30 00:00:00', '提交地形图正式成果');
INSERT INTO `cmc_project_progress` VALUES (1622, '1648881410631270413', '100', '2023-07-29 00:00:00', '提交成果');
INSERT INTO `cmc_project_progress` VALUES (1623, '1648881410631270412', '10', '2023-09-28 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1624, '1648881410631270411', '30', '2023-07-18 00:00:00', '外业工作完成');
INSERT INTO `cmc_project_progress` VALUES (1625, '1648881410631270411', '100', '2023-07-20 00:00:00', '提交成果');
INSERT INTO `cmc_project_progress` VALUES (1626, '1648881410631270410', '80', '2023-07-14 00:00:00', '完成外业数据采集，提供开挖方量数据');
INSERT INTO `cmc_project_progress` VALUES (1627, '1648881410631270410', '100', '2023-07-24 00:00:00', '提供测绘产品');
INSERT INTO `cmc_project_progress` VALUES (1628, '1648881410631270408', '30', '2023-07-31 00:00:00', '完成实景三维模型');
INSERT INTO `cmc_project_progress` VALUES (1629, '1648881410631270408', '50', '2023-09-04 00:00:00', '地形图数字化完成');
INSERT INTO `cmc_project_progress` VALUES (1630, '1648881410631270408', '100', '2023-09-15 00:00:00', 'dem、dom完成');
INSERT INTO `cmc_project_progress` VALUES (1631, '1648881410631270407', '10', '2023-07-03 00:00:00', '进场准备工作，项目部建立、现场工作熟悉、各类资料报审');
INSERT INTO `cmc_project_progress` VALUES (1632, '1648881410631270407', '15', '2023-08-14 00:00:00', '监测控制网TN08双金属标倒垂钻孔工作开展施工作业');
INSERT INTO `cmc_project_progress` VALUES (1633, '1648881410631270407', '20', '2023-09-15 00:00:00', '完成7个供应商设备采购及合同签订，同时与另外3家供应商正在沟通中');
INSERT INTO `cmc_project_progress` VALUES (1634, '1648881410631270407', '25', '2023-10-15 00:00:00', '监测控制网TN08终孔，设备进场验收。');
INSERT INTO `cmc_project_progress` VALUES (1635, '1648881410631270407', '30', '2023-11-15 00:00:00', '监测控制网TN06开孔，GNSS信号测试、一体化测斜仪安装、大坝阻尼器安装等');
INSERT INTO `cmc_project_progress` VALUES (1636, '1648881410631270407', '50', '2023-12-31 00:00:00', '倒垂、双金倒垂等均施工完成，观测房修建启动');
INSERT INTO `cmc_project_progress` VALUES (1637, '1648881410631270407', '55', '2024-02-29 00:00:00', '倒垂、双金属标观测房修建施工中，一体化测斜仪调试安装');
INSERT INTO `cmc_project_progress` VALUES (1638, '1648881410631270407', '65', '2024-03-31 00:00:00', '倒垂、双金属标观测房修建施工中，一体化测斜仪调试完成，多点位移计和锚索测力计排查完成');
INSERT INTO `cmc_project_progress` VALUES (1639, '1648881410631270407', '70', '2024-04-30 00:00:00', '倒垂、双金属标观测房修建完成，多点位移计和锚索测力计线缆敷设施工中');
INSERT INTO `cmc_project_progress` VALUES (1640, '1648881410631270406', '90', '2023-05-22 00:00:00', '外业人工测图、控制测量完成，方量计算及地形图已提交甲方使用。剩余土方平衡报告正在编制中。');
INSERT INTO `cmc_project_progress` VALUES (1641, '1648881410631270406', '100', '2023-05-25 00:00:00', '相关成果资料已提交审核');
INSERT INTO `cmc_project_progress` VALUES (1642, '1648881410631270405', '40', '2023-05-31 00:00:00', '完成2023年1月~2023年5月数据收集、分析');
INSERT INTO `cmc_project_progress` VALUES (1643, '1648881410631270405', '50', '2023-07-08 00:00:00', '完成2023年6月监测数据收集、分析');
INSERT INTO `cmc_project_progress` VALUES (1644, '1648881410631270405', '60', '2023-09-05 00:00:00', '完成2023年7月、8月监测数据收集、分析');
INSERT INTO `cmc_project_progress` VALUES (1645, '1648881410631270405', '70', '2023-11-10 00:00:00', '完成2023年9月、10月监测数据收集、分析');
INSERT INTO `cmc_project_progress` VALUES (1646, '1648881410631270405', '80', '2023-12-21 00:00:00', '完成2023年11月、12月监测数据收集、分析');
INSERT INTO `cmc_project_progress` VALUES (1647, '1648881410631270405', '90', '2024-02-15 00:00:00', '完成2023年直孔、羊湖年度监测资料整编分析报告（初稿）');
INSERT INTO `cmc_project_progress` VALUES (1648, '1648881410631270405', '95', '2024-03-01 00:00:00', '成2023年直孔、羊湖年度监测资料整编分析报告（终稿）');
INSERT INTO `cmc_project_progress` VALUES (1649, '1648881410631270405', '100', '2024-03-04 00:00:00', '向甲方提交正式报告');
INSERT INTO `cmc_project_progress` VALUES (1650, '1648881410631270404', '30', '2023-06-10 00:00:00', '已完成美玉乡全部外业工作');
INSERT INTO `cmc_project_progress` VALUES (1651, '1648881410631270404', '0', '2023-06-25 00:00:00', '甲方仍未下达本阶段勘察任务，勘察工作暂缓');
INSERT INTO `cmc_project_progress` VALUES (1652, '1648881410631270403', '70', '2023-05-14 00:00:00', '第一阶段');
INSERT INTO `cmc_project_progress` VALUES (1653, '1648881410631270403', '100', '2023-05-23 00:00:00', '提交成果');
INSERT INTO `cmc_project_progress` VALUES (1654, '1648881410631270402', '100', '2023-05-26 00:00:00', '基点恢复');
INSERT INTO `cmc_project_progress` VALUES (1655, '1648881410631270402', '100', '2023-05-26 00:00:00', '断面测量（含水下）');
INSERT INTO `cmc_project_progress` VALUES (1656, '1648881410631270402', '50', '2023-05-26 00:00:00', '基点校核');
INSERT INTO `cmc_project_progress` VALUES (1657, '1648881410631270402', '50', '2023-05-26 00:00:00', '水尺恢复');
INSERT INTO `cmc_project_progress` VALUES (1658, '1648881410631270402', '20', '2023-05-26 00:00:00', '水尺测量');
INSERT INTO `cmc_project_progress` VALUES (1659, '1648881410631270402', '90', '2023-05-31 00:00:00', '陪同业主检查数据成果');
INSERT INTO `cmc_project_progress` VALUES (1660, '1648881410631270402', '100', '2023-06-12 00:00:00', '资料完成');
INSERT INTO `cmc_project_progress` VALUES (1661, '1648881410631270401', '30', '2023-04-16 00:00:00', '完成五等GNSS、像控点、检查点测量');
INSERT INTO `cmc_project_progress` VALUES (1662, '1648881410631270401', '80', '2023-04-19 00:00:00', '完成外业调绘工作');
INSERT INTO `cmc_project_progress` VALUES (1663, '1648881410631270401', '100', '2023-04-21 00:00:00', '完成内业成图并提交成都院项目负责人');
INSERT INTO `cmc_project_progress` VALUES (1664, '1648881410610298882', '90', '2023-05-04 00:00:00', '外业工作已完成，内业数据整理正在进行');
INSERT INTO `cmc_project_progress` VALUES (1665, '1648881410610298882', '100', '2023-11-03 00:00:00', '已提交完成');
INSERT INTO `cmc_project_progress` VALUES (1666, '1648881410593521666', '20', '2023-04-16 00:00:00', '飞行进场');
INSERT INTO `cmc_project_progress` VALUES (1667, '1648881410593521666', '50', '2023-04-17 00:00:00', '外业调绘');
INSERT INTO `cmc_project_progress` VALUES (1668, '1648881410593521666', '100', '2023-04-20 00:00:00', '提交正式成果');
INSERT INTO `cmc_project_progress` VALUES (1669, '1648881410572550145', '50', '2023-04-12 00:00:00', '地形图外业实测完成');
INSERT INTO `cmc_project_progress` VALUES (1670, '1648881410572550145', '80', '2023-04-14 00:00:00', '地形图编辑完成');
INSERT INTO `cmc_project_progress` VALUES (1671, '1648881410572550145', '100', '2023-04-19 00:00:00', '提交业主使用');
INSERT INTO `cmc_project_progress` VALUES (1672, '1648881410555772930', '20', '2023-04-20 00:00:00', '地物采集');
INSERT INTO `cmc_project_progress` VALUES (1673, '1648881410555772930', '40', '2023-04-22 00:00:00', '点云数据处理');
INSERT INTO `cmc_project_progress` VALUES (1674, '1648881410555772930', '50', '2023-04-24 00:00:00', '外业调绘');
INSERT INTO `cmc_project_progress` VALUES (1675, '1648881410555772930', '100', '2023-05-05 00:00:00', '提交资用图（项目变更）');
INSERT INTO `cmc_project_progress` VALUES (1676, '1648881410534801409', '50', '2023-04-14 00:00:00', '外业完成');
INSERT INTO `cmc_project_progress` VALUES (1677, '1648881410534801409', '80', '2023-04-18 00:00:00', '地形图编辑完成');
INSERT INTO `cmc_project_progress` VALUES (1678, '1648881410534801409', '100', '2023-04-21 00:00:00', '提交正式图');
INSERT INTO `cmc_project_progress` VALUES (1679, '1648881410480275457', '50', '2023-04-24 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1680, '1648881410480275457', '100', '2023-05-05 00:00:00', NULL);
INSERT INTO `cmc_project_progress` VALUES (1681, '1648881410631270465', '5', '2024-06-24 00:00:00', '完成像控点测量');
INSERT INTO `cmc_project_progress` VALUES (1682, '1648881410631270465', '20', '2024-06-30 00:00:00', '完成航飞和平面联测');
INSERT INTO `cmc_project_progress` VALUES (1683, '1648881410631270465', '40', '2024-07-15 00:00:00', '完成1：1000区域调绘、巡图');
INSERT INTO `cmc_project_progress` VALUES (1684, '1648881410631270466', '30', '2024-07-11 00:00:00', '调绘工作，因现场村民不让测绘。');
INSERT INTO `cmc_project_progress` VALUES (1685, '1648881410631270466', '60', '2024-07-11 00:00:00', '检查点测量，因现场村民不让测绘。');
INSERT INTO `cmc_project_progress` VALUES (1686, '1648881410631270466', '100', '2024-07-11 00:00:00', '控制点测量');
INSERT INTO `cmc_project_progress` VALUES (1687, '1648881410631270466', '100', '2024-07-11 00:00:00', '三角高程测量');
INSERT INTO `cmc_project_progress` VALUES (1688, '1648881410631270467', '10', '2024-07-06 00:00:00', '完成了平面网点的通视条件清理、水准点的排查');
INSERT INTO `cmc_project_progress` VALUES (1689, '1648881410631270467', '40', '2024-07-11 00:00:00', '完成水准网观测');
INSERT INTO `cmc_project_progress` VALUES (1690, '1648881410631270467', '80', '2024-07-18 00:00:00', '完成平面网观测');
INSERT INTO `cmc_project_progress` VALUES (1691, '1648881410631270467', '90', '2024-07-21 00:00:00', '结束外业，返回成都');
INSERT INTO `cmc_project_progress` VALUES (1692, '1648881410631270449', '100', '2024-07-01 00:00:00', '地形图、断面已按院内吴东利要求的格式上交');

-- ----------------------------
-- 46、cmc技术方案表
-- ----------------------------
drop table if exists `cmc_technical_plan`;
create table `cmc_technical_plan`  (
  `technical_plan_id` 		char(19)  		not null 	comment '技术方案id',
  `project_id` 				char(19)  		default null comment '项目id',
  `technical_director` 		bigint			default null comment '技术负责人',
  `technical_designer` 		bigint			default null comment '技术设计人',
  `technical_planner` 		bigint			default null comment '技术安排人',
  `technical_auditor` 		bigint			default null comment '技术审核人',
  `manager_user_id` 		bigint			default null comment '总工程师',
  `plan_comment` 			varchar(255)	default null comment '技术安排意见',
  `quality_inspector` 		varchar(20)		default null comment '质量检查员',
  `technical_time` 			date			default null comment '技术安排时间',
  `technical_document` 		varchar(255)	default null comment '技术方案',
  `modify_document` 		varchar(255)	default null comment '修改技术方案',
  `final_document` 			varchar(255)	default null comment '最终技术方案',
  `design_description` 		varchar(255)	default null comment '方案说明',
  `technical_comment` 		varchar(255)	default null comment '技术审核意见',
  `manage_comment` 			varchar(255)	default null comment '总工审核意见',
  `technical_upload_time` 	date			default null comment '方案上传时间',
  `tech_approval_time` 		date			default null comment '技术审核时间',
  `manage_approval_time` 	date			default null comment '总工审核时间',
  primary key (`technical_plan_id`)
) engine = innodb comment = 'cmc技术方案表';

-- ----------------------------
-- 初始化-技术方案表数据
-- ----------------------------
INSERT INTO `cmc_technical_plan` VALUES ('1648881410480275457', '1648881410480275457', 55, 33, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-04-17', NULL, NULL, NULL, NULL, NULL, NULL, '2023-06-28', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410534801409', '1648881410534801409', 55, NULL, 46, NULL, NULL, '实施方案及时提交审核。', '54', '2023-04-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410555772930', '1648881410555772930', 55, 66, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-04-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410572550145', '1648881410572550145', 46, NULL, 46, NULL, NULL, '简要的实施方案及时提交审核。', '56', '2023-04-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410593521666', '1648881410593521666', 46, 122, 46, NULL, NULL, '实施方案及时提交审核。', '54', '2023-04-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410610298882', '1648881410610298882', NULL, 116, 46, NULL, NULL, '实施方案及时提交审核。', '55', '2023-04-09', NULL, NULL, NULL, '严格按照国家现行有关规程、规范和勘察作业计划的规定开展工作，认真贯彻国家相关方针、政策和规定。\n按照设计的技术任务要求及程序开展工作', NULL, NULL, '2023-04-11', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270401', '1648881410631270401', 55, 144, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-04-09', NULL, NULL, NULL, '已提交', NULL, NULL, '2023-07-12', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270402', '1648881410631270402', 55, 145, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-05-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270403', '1648881410631270403', 55, 33, 46, 46, 9, '实施方案及时提交审核。', '56', '2023-05-10', NULL, NULL, NULL, NULL, '已核查，技术设计满足实施要求。', '同意。', '2023-05-11', '2023-05-11', '2023-05-11');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270404', '1648881410631270404', 55, 149, 46, NULL, NULL, '实施方案及时提交审核。', '53,56,150', '2023-05-11', NULL, NULL, NULL, NULL, NULL, NULL, '2023-08-01', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270405', '1648881410631270405', 48, 101, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-05-16', NULL, NULL, NULL, '本方案由项目经理高强编写，周全进行修改并完成上传。', NULL, NULL, '2023-07-09', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270406', '1648881410631270406', 46, 112, 46, NULL, NULL, '实施方案及时提交审核。', '55', '2023-05-19', NULL, NULL, NULL, NULL, NULL, NULL, '2023-05-19', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270407', '1648881410631270407', 48, 101, 46, NULL, NULL, '实施方案及时提交审核。', '57,46', '2023-06-10', NULL, NULL, NULL, '已上传', NULL, NULL, '2023-06-12', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270408', '1648881410631270408', 49, 32, 46, NULL, NULL, '实施方案及时提交审核。', '53', '2023-07-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270409', '1648881410631270409', 47, 144, 46, NULL, NULL, '实施方案及时提交审核。', '57,46', '2023-07-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270410', '1648881410631270410', 55, 61, 46, NULL, NULL, '及时提交作业方案。', '53', '2023-07-13', NULL, NULL, NULL, NULL, NULL, NULL, '2023-07-17', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270411', '1648881410631270411', 49, 32, 46, 46, 9, '实施方案及时提交审核。', '55', '2023-07-18', NULL, NULL, NULL, '按要求进行设计', '作业计划已审核。', '同意执行。', '2023-08-01', '2023-08-03', '2023-08-18');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270412', '1648881410631270412', 48, 138, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-07-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270413', '1648881410631270413', 55, 71, 46, NULL, NULL, '实施方案及时提交审核。', '54', '2023-07-28', NULL, NULL, NULL, NULL, NULL, NULL, '2023-07-31', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270415', '1648881410631270415', 32, 32, 46, NULL, NULL, '实施方案及时提交审核。', '143', '2023-10-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270417', '1648881410631270417', 49, 95, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-10-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270418', '1648881410631270418', 48, 102, 46, 46, 9, '实施方案及时提交审核。', '57', '2023-11-01', NULL, NULL, NULL, NULL, '满足项目实施要求。', '修改后执行。', '2023-11-02', '2023-11-14', '2023-11-14');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270419', '1648881410631270419', 57, 80, 46, NULL, NULL, '实施方案及时提交审核。', '55', '2023-11-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270420', '1648881410631270420', 48, 113, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-11-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270421', '1648881410631270421', 46, 59, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-11-20', NULL, NULL, NULL, NULL, NULL, NULL, '2023-11-20', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270422', '1648881410631270422', 48, 102, 46, 46, 9, '实施方案及时提交审核。', '57', '2023-11-24', NULL, NULL, NULL, NULL, '设计方案满足项目要求。', '检查规范用新版。其余按设计执行。', '2023-12-06', '2023-12-17', '2023-12-19');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270423', '1648881410631270423', 49, 71, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2023-12-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270424', '1648881410631270424', 49, 15, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2024-01-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270427', '1648881410631270427', 49, 84, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2024-01-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270428', '1648881410631270428', 49, 143, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2024-01-17', NULL, NULL, NULL, NULL, NULL, NULL, '2024-03-27', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270429', '1648881410631270429', 49, 83, 46, 46, 9, '实施方案及时提交审核。', '53,56', '2024-02-22', NULL, NULL, NULL, NULL, '已核，满足项目要求。', '同意执行。', '2024-03-01', '2024-03-21', '2024-03-25');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270430', '1648881410631270430', 46, 76, 46, 46, 9, '实施方案及时提交审核。', '55', '2024-02-28', NULL, NULL, NULL, NULL, '已核，满足项目要求。', '同意执行。', '2024-03-11', '2024-03-19', '2024-03-25');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270431', '1648881410631270431', 49, 71, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2024-02-28', NULL, NULL, NULL, NULL, NULL, NULL, '2024-03-11', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270432', '1648881410631270432', 49, 83, 46, 49, 9, '实施方案及时提交审核。', '53', '2024-03-07', NULL, NULL, NULL, NULL, '满足用户要求，按技术设计书执行。', '同意执行。', '2024-03-15', '2024-03-27', '2024-04-12');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270433', '1648881410631270433', 55, 83, 46, NULL, NULL, '实施方案及时提交审核。', '54', '2024-03-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270434', '1648881410631270434', 49, 69, 46, NULL, NULL, '实施方案及时提交审核。', '53,54', '2024-03-13', NULL, NULL, NULL, NULL, NULL, NULL, '2024-03-18', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270435', '1648881410631270435', 49, 71, 46, 46, 9, '实施计划及时提交审核。', '53,54,56', '2024-03-19', NULL, NULL, NULL, NULL, '满足项目要求。', '修改后执行。', '2024-03-25', '2024-04-01', '2024-04-01');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270436', '1648881410631270436', 46, 83, 46, NULL, NULL, '实施方案及时提交审核。', '55', '2024-03-27', NULL, NULL, NULL, NULL, NULL, NULL, '2024-04-16', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270437', '1648881410631270437', 46, 94, 46, 46, 9, '实施方案及时提交审核。', '57', '2024-03-28', NULL, NULL, NULL, '按照库区淹没线和业主指定点位埋设标识牌', '满足项目要求。', '同意执行。', '2024-04-03', '2024-04-07', '2024-04-12');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270438', '1648881410631270438', 55, 71, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2024-04-03', NULL, NULL, NULL, NULL, NULL, NULL, '2024-05-06', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270439', '1648881410631270439', 49, 32, 46, 46, 9, '实施方案及时提交审核。', '53,56', '2024-04-09', NULL, NULL, NULL, '按要求进行设计', '满足项目要求。', '修改后可执行。', '2024-04-19', '2024-04-19', '2024-04-22');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270440', '1648881410631270440', 46, 80, 46, NULL, NULL, '实施方案及时提交审核。', '54', '2024-04-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270441', '1648881410631270441', 49, 33, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2024-04-24', NULL, NULL, NULL, NULL, NULL, NULL, '2024-04-29', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270443', '1648881410631270443', 49, 33, 46, 46, 9, '实施方案及时提交审核。', '54,55', '2024-04-29', NULL, NULL, NULL, NULL, '已核。', '同意执行。', '2024-05-10', '2024-05-17', '2024-05-17');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270444', '1648881410631270444', 49, 32, 46, 46, 9, '实施方案及时提交审核。', '55', '2024-05-06', NULL, NULL, NULL, '按要求进行设计', '已核。', '同意执行。', '2024-05-13', '2024-05-17', '2024-05-17');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270445', '1648881410631270445', 46, 61, 46, NULL, NULL, '实施方案及时提交审核。', '55', '2024-05-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270446', '1648881410631270446', 49, 83, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2024-05-22', NULL, NULL, NULL, NULL, NULL, NULL, '2024-05-27', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270447', '1648881410631270447', 49, 84, 46, NULL, NULL, '实施方案及时提交审核。', '53', '2024-05-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270448', '1648881410631270448', 46, 61, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2024-06-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270449', '1648881410631270449', 49, 94, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2024-06-05', NULL, NULL, NULL, '到现场探勘，与业主沟通后制定作业计划。', NULL, NULL, '2024-06-14', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270450', '1648881410631270450', 46, 83, 46, NULL, NULL, '实施方案及时提交审核。', '55,57', '2024-06-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270451', '1648881410631270451', 49, 32, 46, NULL, NULL, '实施方案及时提交审核。', '54,55,56', '2024-01-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270452', '1648881410631270452', 49, 72, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2024-01-15', NULL, NULL, NULL, NULL, NULL, NULL, '2024-02-07', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270453', '1648881410631270453', 48, 102, 46, 46, 9, '实施方案及时提交审核。', '57', '2024-01-26', NULL, NULL, NULL, NULL, '满足项目要求。', '同意执行。', '2024-01-26', '2024-02-03', '2024-02-04');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270454', '1648881410631270454', 48, 102, 46, 46, 9, '实施方案及时提交审核。 ', '57', '2024-01-30', NULL, NULL, NULL, NULL, '满足项目要求。', '同意执行。', '2024-01-30', '2024-02-03', '2024-02-04');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270460', '1648881410631270460', 48, 109, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2024-03-06', NULL, NULL, NULL, '在马总指导下完成，并已提交业主过会审查，按审查意见修改上传。', NULL, NULL, '2024-04-17', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270463', '1648881410631270463', 46, 72, 46, NULL, NULL, '实施方案及时提交审核。', '55', '2024-05-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270464', '1648881410631270464', 46, 61, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2024-05-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270465', '1648881410631270465', 49, 71, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2024-06-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270466', '1648881410631270466', 49, 145, 46, NULL, NULL, '实施方案及时提交审核。', '53,55,56', '2024-06-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410631270467', '1648881410631270467', 48, 101, 46, NULL, NULL, '实施方案及时提交审核。', '57,46', '2024-06-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410643853314', '1648881410643853314', 55, 71, 46, NULL, NULL, '实施方案及时提交审核。', '54', '2023-04-07', NULL, NULL, NULL, NULL, NULL, NULL, '2023-06-09', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410660630529', '1648881410660630529', 55, 144, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-03-30', NULL, NULL, NULL, '已提交', NULL, NULL, '2023-07-12', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410677407746', '1648881410677407746', 49, 83, 46, NULL, NULL, '实施方案及时提交审核。', '56', '2023-03-16', NULL, NULL, NULL, ' ', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410694184962', '1648881410694184962', 46, 32, 46, 46, 9, '实施方案及时提交审核。', '54,55', '2023-03-21', NULL, NULL, NULL, '按要求进行设计', '已审核，满足作业要求。', '同意执行。', '2023-03-25', '2023-03-27', '2023-03-28');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410710962177', '1648881410710962177', 49, 83, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-03-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410727739393', '1648881410727739393', 55, 143, 46, NULL, NULL, '实施方案及时提交审核。', '143,54', '2023-03-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410744516610', '1648881410744516610', 55, 144, 46, NULL, NULL, '实施方案及时提交审核。', '143,54', '2023-03-16', NULL, NULL, NULL, '已提交', NULL, NULL, '2023-07-12', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410761293825', '1648881410761293825', 46, 102, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-03-14', NULL, NULL, NULL, NULL, NULL, NULL, '2023-06-20', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410778071042', '1648881410778071042', 49, 39, 46, 46, 9, '实施方案及时提交审核。', '55,56', '2023-03-11', NULL, NULL, NULL, '计划编写后按照技术质量部意见已完成修改。', '已核查。', '同意执行。', '2023-07-31', '2023-08-01', '2023-08-02');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410790653953', '1648881410790653953', 49, 39, 46, NULL, NULL, '实施方案及时提交审核。', '55', '2023-03-10', NULL, NULL, NULL, NULL, NULL, NULL, '2023-04-01', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410815819777', '1648881410815819777', 49, 35, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-03-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410832596993', '1648881410832596993', 46, 33, 46, NULL, NULL, '实施方案及时提交审核。', '53,54,56', '2023-03-04', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410849374209', '1648881410849374209', 49, 32, 46, 46, 9, '实施方案及时提交审核。', '53,56', '2023-03-03', NULL, NULL, NULL, '按规范要求进行设计', '满足项目实施要求。', '同意执行。', '2023-03-06', '2023-03-08', '2023-03-29');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410866151425', '1648881410866151425', 49, 84, 46, NULL, NULL, '实施方案及时提交审核。', '54,56', '2023-03-01', NULL, NULL, NULL, NULL, NULL, NULL, '2023-06-02', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410878734337', '1648881410878734337', 55, 61, 46, 46, 9, '实施方案及时提交审核。', '54', '2023-03-01', NULL, NULL, NULL, NULL, '已查，满足规范和用户要求。', '同意执行。', '2023-03-03', '2023-03-06', '2023-03-09');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410899705858', '1648881410899705858', 46, 61, 46, NULL, NULL, '方案及时提交审核。', '55,57', '2023-03-02', NULL, NULL, NULL, NULL, NULL, NULL, '2023-04-03', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410912288769', '1648881410912288769', 49, NULL, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-02-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410929065985', '1648881410929065985', 49, 84, 46, 46, 9, '实施方案及时提交审核。', '54,55', '2023-02-24', NULL, NULL, NULL, NULL, '已核实。', '同意执行。', '2023-03-03', '2023-03-05', '2023-07-07');
INSERT INTO `cmc_technical_plan` VALUES ('1648881410945843202', '1648881410945843202', 49, 144, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2023-02-21', NULL, NULL, NULL, '已提交', NULL, NULL, '2023-07-12', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410962620417', '1648881410962620417', 55, 35, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-02-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881410979397634', '1648881410979397634', 55, NULL, 46, NULL, NULL, '实施方案及时提交审核。', '53', '2023-02-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411000369153', '1648881411000369153', 46, 83, 46, NULL, NULL, '实施方案及时提交审核。', '54', '2023-02-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411017146369', '1648881411017146369', 46, 71, 46, NULL, NULL, '实施方案及时提交审核。', NULL, '2023-02-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411033923585', '1648881411033923585', 49, 145, 46, NULL, NULL, '实施方案及时提交审核。', '53', '2023-02-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411050700802', '1648881411050700802', 55, 84, 46, 46, 9, '实施方案及时提交审核。', '53,56', '2023-02-14', NULL, NULL, NULL, NULL, '已核实。', '同意执行。', '2023-03-29', '2023-03-31', '2023-07-07');
INSERT INTO `cmc_technical_plan` VALUES ('1648881411067478017', '1648881411067478017', 46, 61, 46, 46, 9, '实施方案及时提交审核。', '57', '2023-02-14', NULL, NULL, NULL, NULL, '已查，满足规范和用户要求。', '同意执行。', '2023-03-03', '2023-03-04', '2023-02-02');
INSERT INTO `cmc_technical_plan` VALUES ('1648881411084255234', '1648881411084255234', 55, 66, 46, NULL, NULL, '实施方案及时提交审核。', '54', '2023-02-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411105226753', '1648881411105226753', 55, 84, 46, 46, 9, '实施方案及时提交审核。', '53,56', '2023-02-08', NULL, NULL, NULL, '已按项目实际完成测绘作业计划', '已核实。', '同意执行。', '2023-02-15', '2023-02-16', '2023-07-07');
INSERT INTO `cmc_technical_plan` VALUES ('1648881411122003970', '1648881411122003970', 49, 33, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2023-02-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411138781186', '1648881411138781186', 55, 84, 46, 46, 9, '实施方案及时提交审核。', '53,56', '2023-02-08', NULL, NULL, NULL, '已按项目要求调整作业方案', '按技术交底和作业计划实施生产。', '同意执行。', '2023-05-20', '2023-05-21', '2023-05-22');
INSERT INTO `cmc_technical_plan` VALUES ('1648881411138781187', '1648881411138781187', 55, 60, 46, NULL, NULL, '实施方案及时提交审核。', '54', '2023-12-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411138781188', '1648881411138781188', 46, 83, 46, NULL, NULL, '实施方案及时提交审核。', '53', '2023-12-14', NULL, NULL, NULL, '方案已上传。', NULL, NULL, '2023-12-30', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411138781189', '1648881411138781189', 55, 112, 46, 46, 9, '实施方案及时提交审核。', '53', '2023-12-26', NULL, NULL, NULL, NULL, '满足项目要求。', '同意执行。', '2024-01-09', '2024-01-11', '2024-01-15');
INSERT INTO `cmc_technical_plan` VALUES ('1648881411159752705', '1648881411159752705', 49, NULL, 46, NULL, NULL, '实施方案及时提交审核', '55', '2023-02-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411184918529', '1648881411184918529', 49, NULL, 46, NULL, NULL, '实施方案及时提交审核。', '53', '2023-02-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411201695745', '1648881411201695745', 49, 144, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2023-02-06', NULL, NULL, NULL, '已提交', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411218472961', '1648881411218472961', 49, NULL, 46, NULL, NULL, '作业方案及时提交审核。', '54,55', '2023-02-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411235250178', '1648881411235250178', 46, 83, 46, NULL, NULL, '作业方案及时提交审核。', '53,54,55', '2023-02-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411252027394', '1648881411252027394', 49, 32, 46, 46, 9, '作业方案及时提交审核。', '53,56', '2023-02-06', NULL, NULL, NULL, '按要求制定作业计划', '已查。满足作业要求。', '同意执行。', '2023-02-22', '2023-02-22', '2023-02-23');
INSERT INTO `cmc_technical_plan` VALUES ('1648881411268804610', '1648881411268804610', 48, 122, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-02-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411281387521', '1648881411281387521', 48, 120, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-02-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411298164738', '1648881411298164738', 48, 120, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-02-06', NULL, NULL, NULL, '按投标文件和合同要求实施。', NULL, NULL, '2023-02-21', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411319136258', '1648881411319136258', 48, 102, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-02-06', NULL, NULL, NULL, '依据原方案，结合2023年合同内容完成2023年工作方案编制。', NULL, NULL, '2023-02-07', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411331719170', '1648881411331719170', 48, 102, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-02-06', NULL, NULL, NULL, '依据原方案，结合2023年合同内容完成2023年工作方案编制。', NULL, NULL, '2023-02-07', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411348496386', '1648881411348496386', 46, 121, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-02-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411373662209', '1648881411373662209', 46, 61, 46, NULL, NULL, '作业方案及时提交审核。', '55,57', '2023-02-06', NULL, NULL, NULL, '已完成一查、二查，并修改。', NULL, NULL, '2023-02-06', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411419799553', '1648881411419799553', 46, 121, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-02-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411457548290', '1648881411457548290', 50, 71, 46, NULL, NULL, '实施方案及时提交审核。', '53,55', '2023-02-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491329', '1648881411499491329', 55, 116, 46, NULL, NULL, '勘察设计事业部及时提交作业方案于技术负责人审核。', '116,53', '2023-01-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491330', '1648881411499491330', 55, 71, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-12-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491331', '1648881411499491331', 55, 15, 46, NULL, NULL, '实施方案及时提交审核。', '53,54,56', '2023-12-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491332', '1648881411499491332', 46, 84, 46, NULL, NULL, '实施方案及时提交审核。', '54,56', '2023-12-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491333', '1648881411499491333', 55, 60, 46, NULL, NULL, '实施方案及时提交审核。', '53,54,56', '2023-12-06', NULL, NULL, NULL, NULL, NULL, NULL, '2024-04-12', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491334', '1648881411499491334', 55, 60, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-12-06', NULL, NULL, NULL, NULL, NULL, NULL, '2024-04-16', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491335', '1648881411499491335', 49, 83, 46, NULL, NULL, '实施方案及时提交审核。', '53,54,56', '2023-12-01', NULL, NULL, NULL, '方案已上传。', NULL, NULL, '2023-12-15', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491336', '1648881411499491336', 55, 60, 46, NULL, NULL, '实施方案及时提交审核。', '53', '2023-11-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491338', '1648881411499491338', 49, 109, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2023-11-11', NULL, NULL, NULL, NULL, NULL, NULL, '2024-05-24', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491339', '1648881411499491339', 55, 61, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-11-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491340', '1648881411499491340', 46, 83, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-11-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491341', '1648881411499491341', 49, 60, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2023-11-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491342', '1648881411499491342', 49, 84, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-11-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491343', '1648881411499491343', 46, 71, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2023-11-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491346', '1648881411499491346', 49, 83, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-10-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491347', '1648881411499491347', 55, 84, 46, 46, 9, '实施方案及时提交审核。', '53,56', '2023-10-11', NULL, NULL, NULL, NULL, '满足项目作业要求。', '同意执行。', '2023-10-16', '2023-11-15', '2023-11-15');
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491348', '1648881411499491348', 55, 32, 46, 46, 9, '实施方案及时提交审核。', '54', '2023-10-07', NULL, NULL, NULL, '按要求进行设计', '作业方案满足项目要求。', '高程坐标系改成抵偿坐标系。其余按设计执行。', '2023-10-10', '2023-12-16', '2023-12-17');
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491349', '1648881411499491349', 49, 83, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-09-27', NULL, NULL, NULL, NULL, NULL, NULL, '2023-10-07', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491350', '1648881411499491350', 55, 61, 46, NULL, NULL, '实施方案及时提交审核。', '54', '2023-09-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491351', '1648881411499491351', 49, 84, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-09-14', NULL, NULL, NULL, NULL, NULL, NULL, '2023-10-16', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491352', '1648881411499491352', 55, 61, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-09-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491354', '1648881411499491354', 46, 84, 46, NULL, NULL, '实施方案及时提交。', '53,54,55', '2023-09-05', NULL, NULL, NULL, NULL, NULL, NULL, '2023-10-10', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491355', '1648881411499491355', 49, 61, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-08-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491356', '1648881411499491356', 46, 61, 46, NULL, NULL, '实施方案及时提交审核。', '55', '2023-08-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491359', '1648881411499491359', 49, 71, 46, NULL, NULL, '实施方案及时提交审核。', '53,54,55,56', '2023-08-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491360', '1648881411499491360', 55, 84, 46, 46, 9, '实施方案及时提交审核。', '54', '2023-08-17', NULL, NULL, NULL, NULL, '已核。', '同意执行。', '2023-08-23', '2023-09-07', '2023-09-11');
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491361', '1648881411499491361', 49, 84, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2023-08-11', NULL, NULL, NULL, NULL, NULL, NULL, '2023-08-14', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491363', '1648881411499491363', 55, 32, 46, 46, 9, '实施方案及时提交方案。', '53,56', '2023-08-09', NULL, NULL, NULL, '按要求进行设计', '已审核，满足相应要求。', '按修改意见修改后执行。', '2023-08-14', '2023-08-16', '2023-08-30');
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491364', '1648881411499491364', 55, 32, 46, 46, 9, '实施方案及时提交审核。', '53,56', '2023-08-09', NULL, NULL, NULL, '按要求进行设计', '已审核，满足作业要求。', '同意执行。', '2023-08-14', '2023-08-15', '2023-08-16');
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491365', '1648881411499491365', 49, 71, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2023-08-14', NULL, NULL, NULL, NULL, NULL, NULL, '2023-08-18', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491366', '1648881411499491366', 55, 61, 46, NULL, NULL, '作业方案及时提交审核。', '53', '2023-08-01', NULL, NULL, NULL, NULL, NULL, NULL, '2023-08-10', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491367', '1648881411499491367', 55, 71, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-07-26', NULL, NULL, NULL, NULL, NULL, NULL, '2023-07-31', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491369', '1648881411499491369', 46, 61, 46, 46, 9, '实施方案及时提交审核。', '55', '2023-07-04', NULL, NULL, NULL, NULL, '已审核，满足规范和用户要求。', '同意执行。', '2023-07-07', '2023-07-07', '2023-07-09');
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491370', '1648881411499491370', 55, 71, 46, NULL, NULL, '配合工作应满足用户需求。', '54', '2023-07-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491371', '1648881411499491371', 49, 33, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2023-06-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491372', '1648881411499491372', 49, 33, 46, NULL, NULL, NULL, '54,55', '2023-06-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491373', '1648881411499491373', 55, 145, 46, NULL, NULL, '按技术交底的要求进行实施作业。', '54', '2023-06-25', NULL, NULL, NULL, '已提交', NULL, NULL, '2023-07-12', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491374', '1648881411499491374', 49, 61, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-06-21', NULL, NULL, NULL, NULL, NULL, NULL, '2023-06-30', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491375', '1648881411499491375', 49, 61, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2023-06-20', NULL, NULL, NULL, NULL, NULL, NULL, '2023-07-10', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491376', '1648881411499491376', 55, 61, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-06-20', NULL, NULL, NULL, NULL, NULL, NULL, '2023-07-01', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491377', '1648881411499491377', 49, 32, 46, NULL, NULL, '实施方案及时提交审核。', '53,54,55', '2023-06-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491378', '1648881411499491378', 55, 84, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-06-05', NULL, NULL, NULL, NULL, NULL, NULL, '2023-06-09', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491379', '1648881411499491379', 49, 61, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-06-05', NULL, NULL, NULL, '作业计划已上传，请记住质量部审核！', NULL, NULL, '2023-06-16', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491380', '1648881411499491380', 55, 121, 46, NULL, NULL, '实施方案及时提交审核。', '54', '2023-06-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491381', '1648881411499491381', 46, 61, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-07-18', NULL, NULL, NULL, NULL, NULL, NULL, '2023-07-25', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491382', '1648881411499491382', 49, 32, 46, 46, 9, '实施方案及时提交审核。', '53,56', '2023-05-22', NULL, NULL, NULL, '按要求进行设计', '已核查，满足规范及用户要求。', '同意执行。', '2023-05-25', '2023-05-25', '2023-08-25');
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491383', '1648881411499491383', 55, 145, 46, NULL, NULL, '实施方案及时提交审核。', '54', '2023-05-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491384', '1648881411499491384', 49, 84, 46, NULL, NULL, '实施方案及时提交审核。', '54,55', '2023-05-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491385', '1648881411499491385', 55, 61, 46, 46, 9, '实施方案及时提交审核。', '54', '2023-05-05', NULL, NULL, NULL, NULL, '实施作业计划满足要求。', '同意执行。', '2023-04-28', '2023-05-05', '2023-05-08');
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491386', '1648881411499491386', 49, 144, 46, NULL, NULL, '实施方案及时提交审核。', '53,56', '2023-05-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411499491388', '1648881411499491388', 46, 145, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-04-26', NULL, NULL, NULL, '已提交技术质量部', NULL, NULL, '2023-07-12', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411533045762', '1648881411533045762', 50, 83, 46, NULL, NULL, '作业方案及时提交技术负责人审核。', '55,56', '2023-01-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411562405890', '1648881411562405890', 49, 149, 46, NULL, NULL, '作业方案及时提交技术负责人审核。', '150,54', '2022-12-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411587571714', '1648881411587571714', 55, 144, 46, NULL, NULL, '实施方案及时提交技术负责人审核。', '143,53', '2022-12-26', NULL, NULL, NULL, '已提交', NULL, NULL, '2023-07-12', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411612737537', '1648881411612737537', 55, 144, 46, NULL, NULL, '实施方案及时提交技术负责人审核。', '143,53', '2022-12-26', NULL, NULL, NULL, '已提交', NULL, NULL, '2023-07-12', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411633709057', '1648881411633709057', NULL, 39, 46, NULL, NULL, '实施方案及时提交技术负责人审核。', '55', '2022-12-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411650486273', '1648881411650486273', 48, 109, 46, NULL, NULL, '实施方案及时提交技术负责人审核。', '46', '2022-12-20', NULL, NULL, NULL, '在技术负责人指导下完成设计，并已提交业主审核通过。', NULL, NULL, '2022-12-30', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411688235010', '1648881411688235010', 46, 59, 46, NULL, NULL, '方案及时提交技术负责人审核。', '55', '2022-12-16', NULL, NULL, NULL, '该项目执行部发统一方案。', NULL, NULL, '2023-11-15', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411705012226', '1648881411705012226', 46, 59, 46, NULL, NULL, '方案及时提交技术负责人审核。', '55', '2022-12-16', NULL, NULL, NULL, '该项目执行部发统一方案', NULL, NULL, '2023-11-15', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411730178050', '1648881411730178050', 55, 145, 46, NULL, NULL, '作业方案及时提交技术负责人审核。', '143', '2022-12-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411751149569', '1648881411751149569', 55, 145, 46, NULL, NULL, '作业方案及时提交技术负责人审核。', '143,54', '2022-12-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411772121090', '1648881411772121090', 49, 94, 46, NULL, NULL, '作业方案及时提交技术负责人审核。', '53,56', '2022-12-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411788898305', '1648881411788898305', NULL, NULL, 46, NULL, NULL, '方案编写人及时提交审核。', '116,53', '2023-02-02', NULL, NULL, NULL, NULL, NULL, NULL, '2023-02-27', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411788898306', '1648881411788898306', 46, 138, 46, NULL, NULL, '方案编写人及时提交实施方案审核。', '57', '2023-08-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411788898307', '1648881411788898307', 46, 138, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-08-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411809869825', '1648881411809869825', 55, 32, 46, 46, 9, '技术方案及时提交技术负责人审核。', '54,55', '2022-12-06', NULL, NULL, NULL, '按照规范及业主要求设计', '已查阅，作业设计满足要求。', '同意执行。', '2022-12-26', '2022-12-26', '2022-12-26');
INSERT INTO `cmc_technical_plan` VALUES ('1648881411826647041', '1648881411826647041', 49, 33, 46, NULL, NULL, '方案及时提交技术负责人、技术质量部审核。', '56,53', '2022-12-05', NULL, NULL, NULL, NULL, NULL, NULL, '2022-12-18', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411847618561', '1648881411847618561', 50, 72, 46, NULL, NULL, '方案及时提交技术负责人和技术质量部审核。', '56,53', '2022-11-28', NULL, NULL, NULL, NULL, NULL, NULL, '2022-12-14', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411868590081', '1648881411868590081', 46, 144, 46, NULL, NULL, '方案及时提交技术负责人审核。', '143,116', '2022-11-18', NULL, NULL, NULL, '已提交', NULL, NULL, '2023-07-12', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411885367297', '1648881411885367297', 55, 71, 46, NULL, NULL, '方案编写及时提交技术负责人、技术质量部审核。', '54', '2022-12-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411906338818', '1648881411906338818', 46, 116, 46, NULL, NULL, '作业方案及时提交给技术负责人审核。', '55', '2022-11-15', NULL, NULL, NULL, NULL, NULL, NULL, '2023-03-27', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411927310338', '1648881411927310338', 46, 33, 46, NULL, NULL, '方案及时提交技术负责人、技术质量部审核。', NULL, '2022-11-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411944087553', '1648881411944087553', 144, 145, 46, NULL, NULL, '方案及时提交技术负责人、技术质量部审核。', '143,54', '2022-11-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411965059074', '1648881411965059074', 56, 71, 46, NULL, NULL, '方案编写人及时提交技术负责人审核。', '54', '2022-11-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881411986030594', '1648881411986030594', 56, 32, 46, NULL, NULL, '技术设计及时提交技术质量部审核。', '49,55,53', '2022-11-03', NULL, NULL, NULL, '按标书及规范要求设计', NULL, NULL, '2022-11-04', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412002807809', '1648881412002807809', 49, 50, 46, NULL, NULL, '作业方案及时提交技术负责人、技术质量部审核。', '53', '2022-11-01', NULL, NULL, NULL, '改设计内容由测绘工程中心、激光技术部、航测遥感中心一组共同完成。', NULL, NULL, '2022-11-09', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412040556545', '1648881412040556545', 46, 81, 46, NULL, NULL, '方案编写人及时提交设计书于技术负责人和技术质量部审查。', '55', '2022-10-27', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412057333761', '1648881412057333761', 46, 122, 46, NULL, NULL, '方案编写人及时提交设计方案于技术负责人、技术质量部审核。', '55', '2022-10-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412074110977', '1648881412074110977', 49, 50, 46, NULL, NULL, '及时提交设计方案于技术负责人、技术质量部审核。', '54,56', '2022-10-21', NULL, NULL, NULL, '控制、航飞、地形图分别由测绘工程中心、激光技术中心、德方公司设计。', NULL, NULL, '2022-10-26', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412090888194', '1648881412090888194', 48, 57, 46, NULL, NULL, NULL, '55', '2022-10-19', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412107665410', '1648881412107665410', 120, 120, 46, 46, 9, NULL, '55', '2022-10-19', NULL, NULL, NULL, '双江口施控网复测即将开展第5次整体复测，网形布置及复测要求基本与以往一致，现已完成技术方案编制，请审核。', '方案已核。结合业主、规范要求进行实施。', '同意执行。', '2022-10-29', '2022-10-31', '2022-11-01');
INSERT INTO `cmc_technical_plan` VALUES ('1648881412124442625', '1648881412124442625', 50, 61, 46, NULL, NULL, '方案编写人及时提交设计书于技术负责人、技术质量部审核。', '57', '2022-10-13', NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-15', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412141219841', '1648881412141219841', 50, NULL, 46, NULL, NULL, '技术设计人编写测绘作业计划，及时提交给技术负责人、技术质量部审核。', '54', '2022-10-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412153802753', '1648881412153802753', 50, 83, 46, NULL, NULL, '方案编写人及时将作业方案提交技术负责人、技术质量部审核。', '53,54,56', '2022-10-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412170579969', '1648881412170579969', 48, 101, 46, NULL, NULL, '技术设计及时提交审核。', '57', '2022-09-30', NULL, NULL, NULL, '按规范要求编写。', NULL, NULL, '2022-11-14', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412204134402', '1648881412204134402', 50, 94, 46, NULL, NULL, '技术设计提交审核。', '55,56', '2022-09-30', NULL, NULL, NULL, '测绘作业计划。', NULL, NULL, '2022-10-05', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412220911618', '1648881412220911618', 50, 71, 46, NULL, NULL, NULL, '56', '2022-09-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412237688834', '1648881412237688834', 50, 71, 46, NULL, NULL, NULL, '56', '2022-09-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412254466049', '1648881412254466049', 50, 71, 46, NULL, NULL, NULL, '56', '2022-09-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412271243265', '1648881412271243265', 142, 149, 46, NULL, NULL, '技术负责人指导并跟踪现场技术实施情况；\n质量检查员及时进行过程检查和最终检查；\n资料管理员及时完成资料归档。', '150,54', '2022-09-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412346740737', '1648881412346740737', 50, 83, 46, NULL, NULL, '测绘作业计划由技术设计人编写，及时提交给技术负责人审核。', '54,55', '2022-08-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412384489473', '1648881412384489473', 113, 113, 46, NULL, NULL, '技术方案及时提交技术质量部审核。', '57', '2022-08-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412401266689', '1648881412401266689', 55, 33, 46, NULL, NULL, '测绘作业计划由技术设计人编写，及时提交给技术负责人审核。', '53,57', '2022-07-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412422238210', '1648881412422238210', 46, 61, 46, 46, 9, '技术设计人编写测绘作业计划，及时提交给技术负责人审核。', '55', '2022-07-28', NULL, NULL, NULL, '按业主要求，编写实施方案，已通过业主审查。', NULL, '同意执行。', '2022-09-20', '2022-10-19', '2022-10-24');
INSERT INTO `cmc_technical_plan` VALUES ('1648881412443209730', '1648881412443209730', 50, 95, 46, NULL, NULL, '测绘作业计划由技术设计人编写，及时提交给技术负责人审核。', '57,46', '2022-07-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412459986946', '1648881412459986946', 46, 102, 46, NULL, NULL, '测绘作业计划由技术设计人编写，及时提交给技术负责人审核。', '57', '2022-07-26', NULL, NULL, NULL, '依据原设计书方案执行', NULL, NULL, '2022-07-26', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412476764161', '1648881412476764161', 15, 144, 46, NULL, NULL, '测绘作业计划由技术设计人编写，及时提交给技术负责人审核。', '143,53', '2022-07-26', NULL, NULL, NULL, '已提交', NULL, NULL, '2023-07-12', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412493541377', '1648881412493541377', 46, 102, 46, NULL, NULL, '测绘作业计划由技术设计人编写，及时提交给技术负责人审核。', '57', '2022-07-26', NULL, NULL, NULL, '依据原设计书执行', NULL, NULL, '2022-07-26', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412514512898', '1648881412514512898', 50, 83, 46, NULL, NULL, '技术负责人指导并跟踪现场技术实施情况；\n质量检查员及时进行过程检查和最终检查；\n资料管理员及时完成资料归档。', '54,56', '2022-07-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412535484418', '1648881412535484418', 46, NULL, 46, NULL, NULL, '测绘作业计划由技术设计人编写，及时提交给技术负责人审核。', '57', '2022-07-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412552261633', '1648881412552261633', 49, NULL, 46, NULL, NULL, '测绘作业计划由技术设计人编写，及时提交给技术负责人审核。', '56,53', '2022-07-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412573233153', '1648881412573233153', 49, 33, 46, NULL, NULL, '测绘作业计划由技术设计人编写，及时提交给技术负责人审核。', '55', '2022-07-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412594204674', '1648881412594204674', 50, 94, 46, NULL, NULL, '测绘作业计划由技术设计人编写，及时提交给技术负责人审核。', '56', '2022-07-20', NULL, NULL, NULL, NULL, NULL, NULL, '2022-07-22', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412610981889', '1648881412610981889', 15, 144, 46, NULL, NULL, '测绘作业计划由技术设计人编写，及时提交给技术负责人审核。', '143,54', '2022-07-20', NULL, NULL, NULL, '已提交', NULL, NULL, '2022-07-24', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412631953410', '1648881412631953410', 49, 113, 50, NULL, NULL, '技术设计人编写测绘作业计划，及时提交给技术负责人审核。', '54', '2022-07-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412736811010', '1648881412736811010', 49, 32, 50, 46, 9, '技术设计人编写测绘作业计划，及时提交给技术负责人审核。', '55', '2022-06-20', NULL, NULL, NULL, '按规范按要求编写作业计划', '已修改完善。', '同意执行。', '2022-06-29', '2022-08-18', '2022-08-23');
INSERT INTO `cmc_technical_plan` VALUES ('1648881412795531265', '1648881412795531265', 46, 33, 50, NULL, NULL, '技术设计人编写测绘作业计划，及时提交给技术负责人审核。', '54', '2022-06-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881412875223041', '1648881412875223041', 46, 32, 50, 46, 9, '测绘作业计划由技术设计人编写，及时提交给技术负责人审核。', '54,56', '2022-06-09', NULL, NULL, NULL, '按规范和要求制定作业计划', '已审核', '同意执行。', '2022-06-23', '2022-06-27', '2022-07-18');
INSERT INTO `cmc_technical_plan` VALUES ('1648881412984274945', '1648881412984274945', 46, 83, 50, NULL, NULL, '技术设计人编写测绘作业计划，提交给技术负责人审核。', NULL, '2022-06-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881413051383810', '1648881413051383810', 46, NULL, 50, NULL, NULL, '方案编写人编写设计书，及时提交给技术负责人审核。', '54', '2022-05-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881413114298369', '1648881413114298369', 46, 71, 50, NULL, NULL, '编写测绘作业计划，及时提交审核。', NULL, '2022-05-18', NULL, NULL, NULL, NULL, NULL, NULL, '2022-05-19', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881413131075586', '1648881413131075586', 46, 83, 50, NULL, NULL, '技术设计人编写测绘作业计划提交技术负责人审核。', NULL, '2022-05-17', NULL, NULL, NULL, '按甲方要求及相关规范之要求进行了本项目的技术方案设计。', NULL, NULL, '2022-05-21', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881413164630018', '1648881413164630018', 49, 71, 50, NULL, NULL, '技术设计人编写测绘作业计划，及时提交技术负责人审核。', NULL, '2022-05-11', NULL, NULL, NULL, NULL, NULL, NULL, '2022-05-28', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881413181407233', '1648881413181407233', 49, 32, 50, 50, 9, '技术设计人编写测绘作业计划，及时提交给技术负责人审核。', '53', '2022-05-09', NULL, NULL, NULL, '按规范要求制定作业计划', '测绘作业计划按照甲方需求设计，符合规范要求。', '2.2修改后，同意执行。', '2022-05-12', '2022-05-18', '2022-05-19');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413210767362', '1648881413210767362', 15, 15, 50, NULL, NULL, '编写测绘作业计划，提交技术负责人审核。', '143', '2022-04-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881413227544578', '1648881413227544578', 15, 15, 50, 50, 9, '编写测绘作业计划，提交技术负责人审核。', '143', '2022-04-25', NULL, NULL, NULL, NULL, '测绘作业计划按照甲方需求设计，符合规范要求。', '不能出现德方公司名称，按检查修改意见后执行。', '2022-04-28', '2022-05-05', '2022-05-05');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413244321794', '1648881413244321794', 46, 71, 50, 50, NULL, '技术设计人编写测绘作业计划，及时提交技术负责人审核。', '54', '2022-04-19', NULL, NULL, NULL, NULL, '测绘作业计划按照甲方需求设计，符合规范要求。', NULL, '2022-05-07', '2022-05-18', NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881413265293314', '1648881413265293314', 46, 94, 50, 50, 9, '技术设计人编写测绘作业计划，及时提交给技术负责人审核。', NULL, '2022-04-08', NULL, NULL, NULL, NULL, '测绘作业计划按照甲方需求设计，符合规范要求。', '同意执行。', '2022-05-07', '2022-05-09', '2022-05-09');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413277876226', '1648881413277876226', 15, 144, 50, NULL, NULL, '技术设计人编写测绘作业计划，及时提交给技术负责人审核。', '143', '2022-04-07', NULL, NULL, NULL, '已提交', NULL, NULL, '2023-07-12', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881413378539521', '1648881413378539521', 15, 15, 50, NULL, NULL, '技术设计人编写项目设计书，及时提交技术负责人审核。', '143', '2022-03-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881413395316737', '1648881413395316737', 101, 101, 101, 50, 9, '按公司审批后技术要求执行。', NULL, '2022-04-11', NULL, NULL, NULL, '设计要求结合甲方需要布设。', '技术设计方案按照甲方需求，符合规范要求。', '同意执行。', '2022-04-11', '2022-04-15', '2022-05-18');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413412093953', '1648881413412093953', 46, 61, 50, NULL, NULL, '技术设计人编写测绘作业计划，及时提交审核。', '53,54,55', '2022-03-24', NULL, NULL, NULL, NULL, NULL, NULL, '2022-04-07', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881413441454081', '1648881413441454081', 46, 144, 50, NULL, NULL, '技术设计人编写测绘作业计划，及时提交技术负责人审核。', '53', '2022-03-25', NULL, NULL, NULL, '已提交', NULL, NULL, '2023-07-12', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881413462425602', '1648881413462425602', 46, 32, 46, 50, 9, '项目技术设计人编写设计书，及时提交技术负责人审核。', '54', '2022-04-06', NULL, NULL, NULL, '按项目要求制定该作业计划', '测绘作业计划按照甲方要求，符合规范要求。', '同意执行。', '2022-04-07', '2022-04-07', '2022-04-08');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413483397121', '1648881413483397121', 46, 61, 50, NULL, NULL, '方案编写人编写测绘作业计划，及时提交审核。', '53', '2022-03-22', NULL, NULL, NULL, NULL, NULL, NULL, '2023-04-03', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881413500174338', '1648881413500174338', 49, 32, 50, 50, 9, '技术设计人编写设计书，及时提交审核。', '53,54', '2022-03-22', NULL, NULL, NULL, '按业主要求进行方案设计。', '技术设计书按照甲方要求设计，符合规范要求。', '同意执行。', '2022-03-28', '2022-04-07', '2022-04-08');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413512757249', '1648881413512757249', 50, 71, 50, 50, 9, '技术设计人编写测绘作业计划，及时提交审核。', '55', '2022-03-21', NULL, NULL, NULL, NULL, '测绘作业计划按照甲方要求，并符合规范要求。', '同意执行。', '2022-04-09', '2022-04-12', '2022-05-18');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413529534465', '1648881413529534465', 46, 113, 50, 50, 9, '本项目技术设计人编写设计书，及时提交技术负责人审核。', '53', '2022-03-10', NULL, NULL, NULL, NULL, '测绘作业计划按照甲方要求，符合规范要求。', '同意执行。', '2022-03-27', '2022-04-07', '2022-04-08');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413550505985', '1648881413550505985', 46, 94, 50, 46, 9, '技术设计人编写测绘作业计划，及时提交到OA上审核。', '55', '2022-03-14', NULL, NULL, NULL, '已完成交底与技术设计，请审核。', '已校核修改', '按要求修改后执行。', '2022-03-31', '2022-03-31', '2022-04-02');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413584060417', '1648881413584060417', 46, 83, 50, 46, 9, '技术设计人编写测绘作业计划，及时提交OA审核。', '53', '2022-02-28', NULL, NULL, NULL, NULL, '已校核修改', '同意执行。', '2022-03-02', '2022-03-09', '2022-03-10');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413651169282', '1648881413651169282', 46, 71, 50, 46, 9, '技术设计人编写测绘作业计划，及时提交OA审核。', NULL, '2022-02-24', NULL, NULL, NULL, NULL, '已校核修改。', '同意执行。', '2022-03-04', '2022-03-07', '2022-03-07');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413667946498', '1648881413667946498', 46, 71, 50, 46, 9, '技术设计人编写测绘作业计划，及时提交OA审核。', NULL, '2022-02-24', NULL, NULL, NULL, NULL, '已校核修改。', '同意执行。', '2022-03-04', '2022-03-07', '2022-03-07');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413684723714', '1648881413684723714', 46, 61, 50, 46, 9, '本项目技术设计人编写测绘作业计划，及时提交OA审核。', '54', '2022-02-17', NULL, NULL, NULL, '已完成技术交底及作业计划编写。', '已校核修改。', '同意执行。', '2022-02-19', '2022-02-22', '2022-02-23');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413709889537', '1648881413709889537', 46, 71, 50, 46, 9, '技术设计人编写测绘作业计划，及时提交给技术负责人审核。', NULL, '2022-02-14', NULL, NULL, NULL, NULL, '已校核修改。', '同意执行。', '2022-02-21', '2022-02-21', '2022-02-21');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413730861058', '1648881413730861058', NULL, NULL, 50, NULL, NULL, '技术设计人编写设计书，及时提交技术质量部审核。', '53', '2022-01-26', NULL, NULL, NULL, '已按照地面激光扫描项目编写技术总结', NULL, NULL, '2022-11-01', NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881413751832578', '1648881413751832578', 50, 113, 50, NULL, NULL, '技术设计人编写测绘作业计划，及时提交审核。', '55', '2022-03-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881413877661698', '1648881413877661698', 46, NULL, 50, 50, 9, '技术设计人编写测绘作业计划，及时提交技术负责人审核。', '55', '2022-01-14', NULL, NULL, NULL, NULL, '测绘作业计划按照甲方要求，符合规范要求。', '同意执行。', '2022-03-01', '2022-04-07', '2022-04-08');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413894438914', '1648881413894438914', 46, NULL, 50, NULL, NULL, '技术设计人编写测绘作业计划，及时提交技术负责人审核。', NULL, '2022-01-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881413911216130', '1648881413911216130', 46, 145, 50, 50, 9, '技术设计人编写测绘作业计划，及时提交技术负责人审核。', '55', '2022-01-11', NULL, NULL, NULL, NULL, '测绘作业计划按照甲方要求，符合规范要求。', '按要求修改后执行。', '2022-01-17', '2022-01-20', '2022-01-25');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413927993346', '1648881413927993346', 46, 113, 50, 46, 9, '编写技术设计，及时提交OA审核。', NULL, '2022-01-04', NULL, NULL, NULL, NULL, '技术设计书还需完善', '同意执行。', '2022-01-04', '2022-01-20', '2022-02-21');
INSERT INTO `cmc_technical_plan` VALUES ('1648881413948964865', '1648881413948964865', 46, 145, 50, 50, 9, '编写测绘作业计划，及时提交OA审核。', '54', '2022-01-04', NULL, NULL, NULL, NULL, '测绘作业计划按照甲方要求编写，符合规范要求。', '按要求修改后执行。', '2022-01-10', '2022-01-12', '2022-01-25');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414003490818', '1648881414003490818', 49, 113, 50, 50, NULL, '编写技术设计，及时提交OA审核。', '53', '2022-01-04', NULL, NULL, NULL, NULL, '按照批注修改后，重新上传审核。', NULL, '2022-01-06', '2022-02-22', NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881414037045250', '1648881414037045250', 46, 61, 50, 46, 9, '技术设计人编写测绘作业计划，提交OA给技术负责人审核。', '53', '2021-12-14', NULL, NULL, NULL, NULL, '已审核，作业计划满足项目需求', '同意执行。', '2021-12-16', '2021-12-18', '2021-12-20');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414066405379', '1648881414066405379', 48, 138, 46, NULL, NULL, '实施方案及时提交审核。', '57', '2023-12-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881414095765505', '1648881414095765505', 46, NULL, 50, 50, NULL, '项目技术设计人编写技术设计书，及时提交给项目技术负责人审核。', NULL, '2021-12-02', NULL, NULL, NULL, NULL, '符合甲方要求。', NULL, '2021-12-11', '2021-12-27', NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881414116737025', '1648881414116737025', 46, 142, 50, 50, 9, '技术设计人编写设计书，及时提交给技术负责人审核。', '55', '2021-12-01', NULL, NULL, NULL, NULL, '符合规范要求。', '同意执行。', '2021-12-08', '2021-12-21', '2021-12-29');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414137708545', '1648881414137708545', 46, NULL, 50, 50, 9, '技术设计人编写项目测绘作业计划，及时提交给技术负责人审核。', NULL, '2021-12-01', NULL, NULL, NULL, NULL, '测绘作业计划复核规范要求，同意执行。', '同意执行。', '2020-11-26', '2021-12-27', '2022-01-04');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414154485761', '1648881414154485761', 46, 61, 50, 46, 9, '技术设计人编写项目测绘作业计划，及时提交给技术负责人审核。', NULL, '2021-12-01', NULL, NULL, NULL, NULL, '已校核修改', '独立坐标结合xr1000地形图设计。同意执行。', '2021-12-02', '2021-12-02', '2021-12-02');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414175457281', '1648881414175457281', NULL, 101, 46, 46, 9, '技术设计、作业满足业主和规范要求', '55', '2021-11-30', NULL, NULL, NULL, NULL, '已校核修改', '按照审核意见修改后执行。', '2021-11-30', '2021-12-03', '2021-12-08');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414192234498', '1648881414192234498', 49, 122, 122, 46, 9, NULL, NULL, '2021-12-01', NULL, NULL, NULL, NULL, '已校核修改', '同意执行。', '2021-12-02', '2021-12-02', '2021-12-02');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414213206018', '1648881414213206018', 46, NULL, 50, 46, 9, '按照甲方和规范要求，项目技术设计人需编写测绘作业计划。', NULL, '2021-11-22', NULL, NULL, NULL, NULL, '已校核修改', '同意执行，删掉内业归档dem。', '2021-11-26', '2021-11-27', '2021-11-29');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414234177537', '1648881414234177537', 46, 15, 50, 46, 9, '按照设计和规范的要求，项目技术设计人编写测绘作业计划。', '55', '2021-11-22', NULL, NULL, NULL, '根据业主要求以及相应的规范，作此项目设计', '已校核', '同意执行。', '2021-11-23', '2021-11-25', '2021-11-26');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414259343361', '1648881414259343361', 46, 145, 50, 46, 9, '按照甲方和规范的要求，项目技术设计人出工前及时设计方案，并报技术质量部技术负责人审核。', NULL, '2021-11-16', NULL, NULL, NULL, NULL, '已校核修改', '同意执行。', '2021-12-02', '2021-12-02', '2021-12-02');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414276120578', '1648881414276120578', 46, 145, 50, 46, 9, '按照院里的要求，技术设计人进场前设计项目方案。', NULL, '2021-11-16', NULL, NULL, NULL, NULL, '已校核修改', '同意执行。', '2021-12-02', '2021-12-03', '2021-12-03');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414292897793', '1648881414292897793', 46, 15, 50, 46, 9, '按照甲方和规范的要求，项目技术设计人提交测绘作业计划或技术交底会议纪要上传OA，技术负责人审核。', NULL, '2021-11-16', NULL, NULL, NULL, '已按照项目要求及实际情况拟定初步作业计划。', NULL, ' 统一执行。', '2021-11-19', '2021-11-20', '2021-11-22');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414313869314', '1648881414313869314', 46, 61, 46, 46, 9, NULL, NULL, '2021-11-20', NULL, NULL, NULL, NULL, NULL, '同意执行。', '2021-11-21', '2021-11-21', '2021-11-22');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414334840833', '1648881414334840833', 46, 113, 50, 46, 9, '按照甲方的要求，执行相应的规范。', NULL, '2021-11-10', NULL, NULL, NULL, '已按相关要求制定作业计划。', NULL, '航测两块区域右下角均应补测像控点。按审批意见修改后执行。', '2021-11-16', '2021-11-16', '2021-11-17');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414355812353', '1648881414355812353', 46, 113, 50, NULL, NULL, '按照甲方的要求设计技术设计书，并符合相应规范。', NULL, '2021-11-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881414372589569', '1648881414372589569', 46, 145, 145, NULL, NULL, NULL, '54', '2021-12-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881414389366785', '1648881414389366785', 46, 61, 46, 46, 9, NULL, '54', '2021-11-16', NULL, NULL, NULL, NULL, NULL, '统一执行。', '2021-11-16', '2021-11-18', '2021-11-22');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414410338305', '1648881414410338305', 46, 15, 46, 46, 9, NULL, '55', '2021-11-11', NULL, NULL, NULL, '已按照相关规范以及项目要求设计出作业计划方案，请技术质量部审核。', NULL, '同意执行。', '2021-11-12', '2021-11-12', '2021-11-12');
INSERT INTO `cmc_technical_plan` VALUES ('1648881414431309825', '1648881414431309825', 46, 113, 46, 46, 9, NULL, NULL, '2021-11-15', NULL, NULL, NULL, '已按任务要求和相关规程规范完成技术设计。', NULL, '同意执行。', '2021-11-15', '2021-11-16', '2021-11-17');
INSERT INTO `cmc_technical_plan` VALUES ('1648881416482324482', '1648881416482324482', NULL, NULL, NULL, NULL, NULL, '按业主要求执行', '53,54', '2021-03-09', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881417644146689', '1648881417644146689', 50, 122, 122, 50, 9, NULL, '55', '2020-11-13', NULL, NULL, NULL, NULL, '测绘设计按照甲方的要求，并执行了相应的规范，符合现场工程实际需求情况。', '同意。', '2020-11-13', '2020-11-16', '2020-12-01');
INSERT INTO `cmc_technical_plan` VALUES ('1648881418239737858', '1648881418239737858', 49, 55, 59, NULL, NULL, '按甲方工作方案执行。', '53', '2021-07-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881421402243074', '1648881421402243074', 46, 46, 61, 50, NULL, NULL, '50', '2019-10-08', NULL, NULL, NULL, NULL, '符合《四川省河湖管理范围划定操作指南》要求。', NULL, '2019-11-14', '2019-11-18', NULL);
INSERT INTO `cmc_technical_plan` VALUES ('1648881421414825986', '1648881421414825986', 46, 46, 20, NULL, NULL, NULL, NULL, '2019-10-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);

-- ----------------------------
-- 47、cmc安全交底表
-- ----------------------------
drop table if exists `cmc_safe`;
create table `cmc_safe`  (
  `safe_id` 			char(19)  		not null 	comment '安全交底id',
  `project_id` 			char(19)  		default null comment '项目id',
  `disclosure_accepter` bigint  		default null comment '接受交底人',
  `disclosurer` 		bigint  		default null comment '安全交底人',
  `environment_comment` text  			default null comment '环境要求',
  `outside_comment` 	text		  	default null comment '外业要求',
  `inside_comment` 		text		  	default null comment '内业要求',
  `disclosure_comment` 	varchar(255)  	default null comment '安全交底意见',
  `accept_comment` 		varchar(255)  	default null comment '接受交底意见',
  `disclosure_time` 	date  			default null comment '安全交底时间',
  `accept_time` 		date  			default null comment '接受交底时间',
  primary key (`safe_id`)
) engine = innodb comment = 'cmc安全交底表';

-- ----------------------------
-- 初始化-安全交底表数据
-- ----------------------------
INSERT INTO `cmc_safe` VALUES ('1648881410480275457', '1648881410480275457', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：高原病、森林（草原）火灾、动物伤害、边坡坠物落石、道路交通、消防安全、触电、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于甘孜州理塘境内，属于高原高海拔地区，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，有高血压II期以上肝、肾、肺、心脏等部位有气质性病变的人员不得参与此次测绘项目，工作前请做好参与人员健康筛查，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（3）项目进出场路途较远，要求驾驶员不得疲劳驾驶，长途行车须强制休息，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶等行为。\n（4）测区道路乡村道路较多，路窄车多，路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（5）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备充电时不得违规充电、超长时间充电、大功率设备充电时须有人值守。\n（6）无人机航测作业前到须到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，起飞前对固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（7）目前正值森林防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（8）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '作业区域海拔4000多，请密切关注参与人员身体健康情况，合理安排作业时间，无人机飞行严格遵守安全操作规程，项目负责人做好作业前安全教育培训，并做好记录。', NULL, '2023-04-20', '2024-03-27');
INSERT INTO `cmc_safe` VALUES ('1648881410534801409', '1648881410534801409', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：交通安全、施工区安全风险、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目工作量较小，地形图现场实测，作业区涉及建筑施工场所，严格遵守施工单位等安全管理规定，进入测区戴好安全帽、反光背心，工作中注意避让施工机械，防范机械伤害；\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（3）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（4）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（5）控制点在选点时须对周边地质情况初步判断，不得太临近沟边、坎边，保证作业时相对处于安全环境;\n（6）项目可能存在租用车辆参与作业，工作中对租用驾驶员安全驾驶技术把关，做好安全提醒和进场前安全教育培训。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目工作量较小，地形图现场实测，作业区涉及建筑施工场所，严格遵守施工单位等安全管理规定，进入测区戴好安全帽、反光背心，工作中注意避让施工机械，防范机械伤害', NULL, '2023-04-13', '2023-07-04');
INSERT INTO `cmc_safe` VALUES ('1648881410555772930', '1648881410555772930', 66, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：相关方安全管理风险、边坡落石、消防安全、交通安全、森林防火、工作中摔伤、滑倒等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及相关方参与控制点测量、地形图调绘等作业，工作前项目负责人须查验其是否具有相关测绘资质；\n（2）工作开展之前，现场负责人结合项目实际辨识测区存在安全风险及危险源，并告知项目参与人员；\n（3）项目负责人须开展野外作业专项安全教育培训，并做好教育培训记录；\n（4）加强班组安全管理，开展好班前安全教育活动；\n（5）测绘作业严格遵守《测绘人员安全规范》及公司安全操作规程；\n（6）无人机航测作业前须两人交叉对固件进行全面检查，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（7）临沟边、坎边作业时严防人员滑倒摔伤;\n（8）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（9）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（10）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及相关方参与控制点测量、地形图调绘等作业，工作前项目负责人须查验其是否具有相关测绘资质，临沟边、坎边作业时严防人员滑倒摔伤。', NULL, '2023-04-11', '2023-10-03');
INSERT INTO `cmc_safe` VALUES ('1648881410572550145', '1648881410572550145', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：森林火险、交通安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目工作量较小，地形图现场实测，沙湾至龚嘴电厂段运矿的大货车较多，山路路况较差，请高度重视道路交通安全；\n（2）作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（7）控制点在选点时须对周边地质情况初步判断，不得太临近沟边、坎边，保证作业时相对处于安全环境。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目工作量较小，地形图现场实测，沙湾至龚嘴电厂段运矿的大货车较多，山路路况较差，请高度重视道路交通安全', NULL, '2023-04-12', '2023-08-10');
INSERT INTO `cmc_safe` VALUES ('1648881410593521666', '1648881410593521666', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：边坡落石、消防安全、交通安全、森林防火、工作中摔伤、滑倒等。 \n（三）针对隐患源制定的安全措施：\n（1）工作开展之前，现场负责人结合项目实际辨识测区存在安全风险及危险源，并告知项目参与人员；\n（2）项目负责人须开展野外作业专项安全教育培训，并做好教育培训记录；\n（3）加强班组安全管理，开展好班前安全教育活动；\n（4）测绘作业严格遵守《测绘人员安全规范》及公司安全操作规程；\n（5）甘孜州目前处于森林防火严管期，所有人员在测区不得抽烟、携带火种，严格遵守属地政府相关管理规定；\n（6）无人机航测作业前须两人交叉对固件进行全面检查，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（7）工作中做好自然灾害防范措施，特别是测区边坡落石严重，经过危险区域先观察在通行；\n（8）加强日常驾驶员安全教育培训，不分心驾驶、疲劳驾驶，路边临时停车须做好过往车辆、行人安全提醒和交通安全防范措施。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区存在边坡落石等自然灾害，工作中须高度警惕，危险区域先观察、再通行，测区禁止一切人员携带火种及吸烟。', NULL, '2023-04-11', '2023-09-01');
INSERT INTO `cmc_safe` VALUES ('1648881410610298882', '1648881410610298882', 116, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患:钻机作业机械伤害、高处坠落、边坡落石（坠物）、道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《水电水利工程钻探规程》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）岩土勘察作业前，应对危险源进行辨识和评价，编写勘察纲要时，应根据不同危险等级制定相应的安全生产防护措施；\n（3）岩土勘察作业点不宜布置在高压输电线路下方，当勘察作业点布置在地上架空线、地下管线、设施以及构筑物的安全保护范围内时，安全生产防护措施应符合地上架空线、地下管线设施及构筑物所有者的有关管理规定；\n（4）作业场地四周应设置安全警示标志、围挡、隔离带或防撞设施等，夜间应设置安全警示灯，作业人员应穿反光背心；\n（5）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（6）禁止食用霉烂、变质和被污染过的食物以及野菜、野果、野生菌菇等野生植物。禁止酗酒和暴饮暴食。不接触和不食用死、病畜肉。禁止饮用异味、异色和被污染的地表水和井水；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁等不安全心理因素；\n（8）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（10）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（11）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（12）本项目涉及相关方参与作业，开展工作前须签订安全分管协议，参与作业的单位须具备相关作业资质和作业许可，项目负责人做好勘察作业过程中安全监管，并留下管理痕迹；\n（13）告知作业人员作业场所和工作岗位存在的危险源、安全生产防护措施和安全生产事故应急救援预案；\n（14）岩土勘察作业期间，与勘察作业无关的人员不得进入勘察作业场地；\n（15）岩土勘察设备启动后，作业人员不得离开作业岗位，非作业人员未经许可不得触碰勘察设备；\n（16）高处作业人员应佩戴有安全锁的安全带，安全带的使用和保管应符合现行国家标准《安全带》（GB 6095）的有关规定。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '钻机作业须严格遵守安全操作规程，工作中严防机械伤害，本项目涉及相关方参与作业，开展工作前须签订安全分管协议，参与作业的单位须具备相关作业资质和作业许可，项目负责人做好勘察作业过程中安全监管，并留下管理痕迹。', NULL, '2023-04-10', '2024-06-13');
INSERT INTO `cmc_safe` VALUES ('1648881410631270401', '1648881410631270401', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（7）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（8）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为;\n（9）控制点在选点时须对周边地质情况初步判断，不得太临近沟边、坎边，保证作业时相对处于安全环境。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严格遵守测绘作业安全操作规程，工作中严防人员摔伤、滑到事故发生，无人机飞行前须两人交叉对各固件进行检查。', NULL, '2023-04-10', '2024-03-29');
INSERT INTO `cmc_safe` VALUES ('1648881410631270402', '1648881410631270402', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：汛期自然灾害、森林火险、淹溺、高处坠落、物体打击、消防安全、触电、摔伤、跌倒、动物伤害等风险。\n（三）针对隐患源制定的安全措施：\n（1）严格遵守泸定水电站安全管理制度，办理好工作票，按要求编制好项目安全管理、文明施工等措施，作业前按要求办理工作票，方可开展作业；\n（2）作业中涉及水电站区域，电器设备、电线较多，工作中不得随意触碰电气设备；\n（3）项目车辆做好日常维护保养，不得病车上路，驾驶员不得疲劳驾驶，分心驾驶，危险路段谨慎通行；\n（4）水上作业和临水边作业须全程穿戴好符合要求的救生衣，水上作业必须有2人以上方可进行，5级以上强风、大雨、雷电、浓雾天气禁止水上作业；\n（5）工作人员严禁在库内游泳、戏水，严禁在船上和工作时间内饮酒；\n（6）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故；\n（7）在作业过程中，保持场地整洁，做好现场文明施工及周围的环境卫生；\n（8）在搬运设备、材料过程中，做好防护，防止脱落砸伤人员；\n（9）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚；\n（10）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程；\n（12）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件；\n（13）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作，临水边测绘时需穿戴好救生衣，做好安全防护', NULL, '2023-05-11', '2023-12-13');
INSERT INTO `cmc_safe` VALUES ('1648881410631270403', '1648881410631270403', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（7）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（8）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为;\n（9）控制点在选点时须对周边地质情况初步判断，不得太临近沟边、坎边，保证作业时相对处于安全环境。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目地处高山峡谷地段，进入汛期，做好边坡落石、泥石流等自然灾害防范工作，无人机飞行须严格遵守安全操作规程。', NULL, '2023-05-11', '2023-09-07');
INSERT INTO `cmc_safe` VALUES ('1648881410631270404', '1648881410631270404', 116, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患:钻机作业机械伤害、高处坠落、边坡落石（坠物）、道路交通、无人机飞行风险、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（1）本项目涉及地质钻探、无人机飞行测量、控制点测量等，安全风险相对较高，项目作业前，项目负责人须结合现场实际情况开展危险源及安全风险辨识、员工安全教育培训，并做好记录；\n（2）钻机安装应水平、稳固，各部件连接牢固，钻塔安装、起立、放倒必须由机长或指定的负责人统一指挥，由有经验的技工操作，塔下严禁站人；\n（3）钻机搬迁前应进行策划，提前制定搬迁线路及搬迁过程注意事项，搬迁前对搬迁线路进行查看，对危险地段提前采取安全标识、防护等措施；\n（4）开钻前应对机械各部位连接螺栓、动力系统、传力系统、升降系统、液压系统及制动装置等进行检查，确保运转正常；\n（5）钻进时严禁用手抓、扶水龙头和龙头胶管，防止脱落伤人及机械回转造成龙头胶管将人缠绕；\n（6）设备运转中，严禁进行拆卸和修理，严禁挂皮带和打皮带蜡，严禁跨越皮带护栏，严禁用撬棍等拨皮带，严禁擦洗或触动运转部位；严禁离合器未分离就换挡；\n（7）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（8）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能，不分心驾驶、疲劳驾驶；\n（9）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（10）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（11）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（12）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过；\n（13）严格遵守《安全生产法》、《水电水利工程钻探规程》《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及地质钻探、无人机飞行测量、控制点测量等，安全风险相对较高，项目作业前，项目负责人须结合现场实际情况开展危险源及安全风险辨识、员工安全教育培训，并做好记录', NULL, '2023-05-15', '2024-03-27');
INSERT INTO `cmc_safe` VALUES ('1648881410631270405', '1648881410631270405', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：森林火险、高处坠落、机械伤害、消防安全、触电、高原反应（病）、摔伤、跌倒、动物伤害等风险。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守国网西藏电力有限公司拉萨发电公司及下属公司（电厂）安全管理制度，按要求编制好项目安全管理、文明施工等措施。\n（2）安全监测作业中需要临时用工时，用工前须购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥。\n（3）作业中涉及水电站区域，电器设备、电线较多，工作中不得随意触碰电气设备。\n（4）项目车辆做好日常维护保养，不得病车上路，驾驶员不得疲劳驾驶，分心驾驶，危险路段谨慎通行。\n（5）提前关注、了解测区气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和班前安全活动。\n（6）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（7）项目地处高原地区，进场前对参与人员做好健康筛查，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，尽可能避免食用生、冷等食品。\n（8）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程。\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（12）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（13）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。\n（14）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2023-05-16', '2024-06-01');
INSERT INTO `cmc_safe` VALUES ('1648881410631270406', '1648881410631270406', 112, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公不随意丢弃；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：交通安全、边坡落石、消防安全、泥石流、洪水、滑到、摔伤等。 \n（三）针对隐患源制定的安全措施：\n（1）（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：新冠肺炎疫情、交通安全、边坡落石、消防安全、泥石流、洪水等。 \n（三）针对隐患源制定的安全措施：\n（1）当前正值每年汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息。测区有灾害性天气预警，工作做好合理安排，。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（2）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。\n（3）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（4）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素。\n（5）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（6）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（7）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。\n（9）项目进场前对参与人员进行身体健康排查，对于有高血压（II期及以上）、，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息。测区有灾害性天气预警，工作做好合理安排。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等；\n（2）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩；\n（3）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（4）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（5）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（6）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（7）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '当前正值每年汛期，遇5级大风、雷电等极端天气暂停外业作业，工作中严防人员滑到、摔伤。', NULL, '2023-05-22', '2023-09-07');
INSERT INTO `cmc_safe` VALUES ('1648881410631270407', '1648881410631270407', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。 \n（二）本项目存在的危险（有害）因素有：汛期自然灾害、森林火险、淹溺、高处坠落、物体打击、相关方安全管理风险、临时用工风险、消防安全、触电、摔伤、跌倒等风险。\n（三）针对隐患源制定的安全措施：\n（1）严格遵守大岗山水电站安全管理规定和项目合同有关安全管理制度，按要求编制好项目安全管理、文明施工等措施，作业前按要求办理好工作票，开展安全技术交底，方可开展作业；\n（2）作业中涉及水电站区域，电器设备、电线较多，工作中不得随意触碰电气设备，如涉及临时用电须安全要求履行审批手续，参与人员须持特种作业人员操作证件（电工证）；\n（3）项目涉及和相关方共同开展作业，须签订安全生产管理协议，明确各自安全职责，并对相关方安全生产工作统一协调、管理，定期（或者不定期）进行安全检查；\n（4）项目涉及临时用工，须按《大渡河公司大岗山水电站大坝及库岸边坡监测设备设施完善工程合同谈判纪要》的要求购买意外伤害保险，加强临时用工人员安全管理，告知其岗位安全风险及控制措施，做好日常安全教育培训和提醒；\n（5）大岗山水电站附近区域近年来发生过多次地震，须开展员工防震避震知识培训，关注地震预警信息；\n（6）作业区域属于高山峡谷地区，地质灾害风险相对高，在监测设备安装、测绘控制点选取等工作时，须对作业周边安全环境进行充分评估，杜绝在存在滑坡、边坡落石、陡岩等危险区域开展作业；\n（7）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作，遇5级以上大风、大雨、雷电等极端天气禁止开展外业作业；\n（8）项目工作人员严禁在库内游泳、戏水、钓鱼，严禁在工作时间内饮酒；\n（9）在作业过程中，保持场地整洁，做好现场文明施工及周围的环境卫生；\n（10）在搬运设备、材料过程中，做好防护，防止脱落砸伤人员；\n（11）在泄水建筑物出口及下游区域作业时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件；\n（12）进入林区不得携带火种及吸烟，严格遵守当地政府森林草原防火规定，禁止吸烟区域严禁吸烟；\n（13）进入作业现场集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故发生；\n（14）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（15）野外工作中预防中暑，各项目配备防暑降温药品，夏季食物容易腐坏、滋生细菌，要注意饮食卫生，预防疾病发生，不采摘、食用野生菌，预防食物中毒；\n（16）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；\n（17）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（18）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（19）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（20）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（21）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严格遵守大岗山水电站安全管理规定和项目合同有关安全管理制度，按要求编制好项目安全管理、文明施工等措施；加强相关方和临时用工安全管理。', NULL, '2023-06-12', '2024-06-17');
INSERT INTO `cmc_safe` VALUES ('1648881410631270408', '1648881410631270408', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '(一）本项目安全目标\n（1）不发生人身轻伤及以上事故；\n（2）不发生设备损坏事故；\n（3）不发生火灾事故；\n（4）不发生交通事故；\n（5）不发生环保事件；\n（6）不发生违法、违纪及与当地居民发生冲突等治安事件。\n（二）本项目存在的危险源及安全风险：消防安全、交通安全。 \n（三）针对隐患源制定的安全措施：\n（1）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（2）资料应做好备份，以防丢失；保管好设备防止丢失。\n（3）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（4）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（5）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目全部为内业，安全风险较低，做好日常办公室安全管理，做好消防安全、交通安全', NULL, '2023-07-04', '2024-02-19');
INSERT INTO `cmc_safe` VALUES ('1648881410631270409', '1648881410631270409', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。 \n（二）本项目存在的危险（有害）因素有：自然灾害、动物伤害、淹溺、高处坠落、物体打击、相关方安全管理风险、临时用工风险、消防安全、触电、境外项目人身安全、摔伤、跌倒等风险。\n（三）针对隐患制定的安全措施\n（1）本项目涉及在国外参与作业，安全风险较高，请项目所有人员高度重视安全，提升安全意识；\n（2）参与人员须单独购买人身意外保险，国内意外保险可能存在出险不理赔等情况；\n（3）本项目涉及在建铁路控制网测量，工作量较大，特别是水准工作量1800公里，在水准测量中严格遵守安全操作规程，穿戴好反光背心，沿公路水准测量须在来车方向摆放好反光锥，弯道路段派员警示；\n（4）在建项目工作中存在交叉作业，作业前和相关方签署交叉作业协议，明确各自职责，工作中做好信息沟通、协调工作；\n（5）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（6）如需与相关方共同开展作业时，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（7）野外工作中有沟、槽、孔、洞，通过湿滑路面时，注意脚下，防止滑倒、摔倒等事故发生；\n（8）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（9）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育；\n（10）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为；\n（11）不得在住宿地或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（12）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（13）进入作业现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（14）施工区域电器设备、设施较多，工作中不得冒险触碰；\n（15）严格遵守当地法律法规，严格遵守业主单位、现场施工单位安全管理规定；\n（16）境外作业由于语言、地域、民族风俗等原因，项目须加强人员管理，不得私自外出，严格遵守；\n（17）严格遵守国家有关安全生产的法律法规、标准、规范有关安全生产的规定，以及甲方各项安全管理制度、工程分包合同中的有关安全的约定，接受甲方的督促、检查和指导；\n（18）作业中加强动物伤害防范，项目地区蛇较多，进入草丛和树林，尽可能穿高帮鞋、长袖衣、长腿裤，蛇最怕具有刺激性气味物质，储备酒精、雄黄、硫磺，野外作业携带必要的防蛇药。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及在境外参与作业，安全风险较高，请项目所有人员高度重视安全，提升安全意识，参与人员须单独购买人身意外保险，本项目涉及在建铁路控制网测量，工作量较大，特别是水准工作量1800公里，在水准测量中严格遵守安全操作规程，工作中做好防动物伤害，特别是蛇伤害预防，购买必要的防蛇药品。', NULL, '2023-08-29', '2024-05-24');
INSERT INTO `cmc_safe` VALUES ('1648881410631270410', '1648881410631270410', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全风险：城镇区域测量道路交通风险、夏季野外作业中暑、消防安全、雷雨天气等。 \n（三）作业中须注意的安全措施（注意事项）：\n（1）本项目工作量较小，采用人工实测地形图，涉及在城镇区域测量，注意交通安全，穿戴好反光背心；\n（2）近日成都地区连续雨天，野外作业合理选择作业时间，雷雨天气不开展野外工作；\n（3）天气炎热，做好中暑等措施，项目购置藿香正气液等防暑药品；\n（4）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（5）项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行；\n（6）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目工作量较小，采用人工实测地形图，城镇区域作业穿好反光背心，高温天气预防中暑，雷雨天气暂停野外作业。', NULL, '2023-07-12', '2023-08-28');
INSERT INTO `cmc_safe` VALUES ('1648881410631270411', '1648881410631270411', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全风险：无人机航测作业风险、汛期地质灾害风险、城镇区域测量道路交通风险、夏季野外作业中暑、消防安全、雷雨天气等。 \n（三）作业中须注意的安全措施（注意事项）：\n（1）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（2）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，工作做好合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等；\n（3）高山峡谷地区野外作业，严防边坡落石，危险路段观察通行；\n（4）天气炎热，做好中暑等措施，项目购置藿香正气液等防暑药品；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行；\n（7）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生.', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '无人机航测作业须严格遵守相关的安全操作规程，巴中地区每年汛期泥石流、边坡落石等地质灾害频发，工作中须高度重视，进入伏天，高温天气较多，合理安排野外作业时间，严防人员中暑。', NULL, '2023-07-15', '2023-08-24');
INSERT INTO `cmc_safe` VALUES ('1648881410631270412', '1648881410631270412', 138, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '安全生产与职业健康要求\n（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全风险：中暑、汛期地质灾害、交通风险、高处坠落、物体打击、起重伤害、机械伤害、坍塌、电气伤害、摔倒等安全风险等。 \n（三）制定的安全措施（安全注意事项）：\n（1）项目部须结合施工现场实际情况制定监测作业安全操作规程、安全生产责任制，建立项目安全组织机构，与公司和项目员工签订安全生产责任书。\n（2）现场作业时，必须遵守业主及相关单位安全、技术操作规程，穿戴好相应的劳动安全防护用具，注意人身和仪器的安全，禁止冒险作业。\n（3）作业中佩戴好安全帽、反光背心、手套、安全带、安全绳等安全设备和增加防护措施，注意作业区上部滚石、高空坠物等。\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与现场施工人员或管理人员取得联系。作业应佩戴必要的安全防护用品和通讯设施，作业时注意洞顶物件坠落、坍塌、渗（漏）水等情况。若发现重金属、有害气体等危险物质，应立即停止作业，撤出洞内，并及时报告。\n（5）有限空间作业应当严格遵守“先通风、再检测、后作业”的原则。严禁通风、检测不合格作业。检测指标包括氧浓度、易燃易爆物质（可燃性气体、爆炸性粉尘）浓度、有毒有害气体浓度。检测应当符合相关国家标准或者行业标准的规定。未经通风和检测合格，任何人员不得进入有限空间作业。检测的时间不得早于作业开始前30分钟。。\n（6）严禁触碰施工现场电气设备，进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（7）项目在作业中尽可能避免交叉作业、并行作业，如确须交叉、并行作业，须制定安全措施，作业前和相关作业单位做好联系、沟通工作。\n（8）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生.\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意.\n（10）公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对委托单位安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作.。（10）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（11）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（12）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，工作做好合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等\n（13）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '现场作业时，必须遵守业主及相关单位安全管理规定，涉及交叉作业时提前做好沟通、协调工作，水准测量工作中做好安全防护措施，重庆天气炎热，合理安排野外作业时间，严防中暑，监测工作时间相对较长，做好人员日常安全管理，临时住地加强消防安全教育培训，不得在资料区域吸烟，不得卧床吸烟。', NULL, '2023-07-15', '2023-09-28');
INSERT INTO `cmc_safe` VALUES ('1648881410631270413', '1648881410631270413', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：高温中暑、汛期自然灾害、城镇道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）工作中遇陡坡弯急、临水临崖临坎路段、汛期泥泞路面、简易公路等危险路段须先下车查看，不冒险前行，驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求；\n（3）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（4）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（5）高边坡，临水边、沟边测绘时注意防滑和防摔倒；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（9）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（10）近期简阳气温较高，合理安排野外作业时间，预防高温中暑事故发生。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及城镇区域作业，工作中注意交通安全，简阳近期气温较高，合理安排作业时间，预防中暑事故发生。', NULL, '2023-07-25', '2024-03-27');
INSERT INTO `cmc_safe` VALUES ('1648881410631270414', '1648881410631270414', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：自然灾害、道路交通、消防安全、无人机飞行风险、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）工作中遇陡坡弯急、临水临崖临坎路段、泥泞路面、简易公路等危险路段须先下车查看，不冒险前行，驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求；\n（3）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（4）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（5）高边坡，临水边、沟边测绘时注意防滑和防摔倒；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2023-09-20', '2024-03-26');
INSERT INTO `cmc_safe` VALUES ('1648881410631270415', '1648881410631270415', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）车辆排放符合国家标准，不会对周围环境产生污染；\n（3）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（4）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：高处坠落、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）野外作业道路交通安全风险高，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，危险路段，观察通行，切记盲目冒进；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）高边坡，临水边、沟边测绘时做好防范措施，严防人员防滑和防摔倒；\n（4）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（5）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（6）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（8）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（10）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施；\n（11）在少数民族地区工作时，应尊重民族风俗和生活习惯，在社会治安差、人烟稀少的地区工作，应事先和当地政府及有关部门联系，取得当地政府和公安机关的支持；\n（12）进入单位、居民宅院进行测绘时，应先出示相关证件，说明情况得到允许后再作业；\n（13）从业人员思想情绪异常波动期间不得参加作业，精神疲惫的情况下不得参加作业，酒后、宿醉状态下不得参加作业。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '新疆喀什地区午后风较大，野外作业合理作业时间，测绘作业严格遵守安全操作规程', NULL, '2023-10-22', '2024-01-12');
INSERT INTO `cmc_safe` VALUES ('1648881410631270416', '1648881410631270416', 116, 58, '（1）车辆排放符合国家标准，不会对周围环境产生污染；\n（2）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（3）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患:钻机作业机械伤害、高处坠落、边坡落石（坠物）、道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《水电水利工程钻探规程》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）岩土勘察作业前，应对危险源进行辨识和评价，编写勘察纲要时，应根据不同危险等级制定相应的安全生产防护措施；\n（3）岩土勘察作业点不宜布置在高压输电线路下方，当勘察作业点布置在地上架空线、地下管线、设施以及构筑物的安全保护范围内时，安全生产防护措施应符合地上架空线、地下管线设施及构筑物所有者的有关管理规定；\n（4）作业场地四周应设置安全警示标志、围挡、隔离带或防撞设施等，夜间应设置安全警示灯，作业人员应穿反光背心；\n（5）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求；\n（6）禁止食用霉烂、变质和被污染过的食物以及野菜、野果、野生菌菇等野生植物。禁止酗酒和暴饮暴食。不接触和不食用死、病畜肉。禁止饮用异味、异色和被污染的地表水和井水；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁等不安全心理因素；\n（8）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（10）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（11）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（12）本项目涉及相关方参与作业，开展工作前须签订安全分管协议，参与作业的单位须具备相关作业资质和作业许可，项目负责人做好勘察作业过程中安全监管，并留下管理痕迹；\n（13）告知作业人员作业场所和工作岗位存在的危险源、安全生产防护措施和安全生产事故应急救援预案；\n（14）岩土勘察作业期间，与勘察作业无关的人员不得进入勘察作业场地；\n（15）岩土勘察设备启动后，作业人员不得离开作业岗位，非作业人员未经许可不得触碰勘察设备；\n（16）高处作业人员应佩戴有安全锁的安全带，安全带的使用和保管应符合现行国家标准《安全带》（GB 6095）的有关规定；\n（17）城区测绘作业严格遵守安全操作规程，穿戴好反光背心，做好过往行人和车辆安全提醒；\n（18）进入单位、居民宅院进行作业时，应先出示相关证件，说明情况得到允许后再作业。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '城区作业时做好安全防护措施，钻探作业时严防机械伤害、物体打击、高处坠落等事故发生，', NULL, '2023-10-22', '2024-06-12');
INSERT INTO `cmc_safe` VALUES ('1648881410631270417', '1648881410631270417', 112, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）车辆排放符合国家标准，不会对周围环境产生污染；\n（3）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（4）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：森林防火、高处坠落、高原病、自然灾害、高海拔地区大风危害、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目作业区域海拔较高，出发前购置预防高原反应和应急药品，对参与人员身体进行健康筛查，不宜进入高原的人员禁止参与作业；\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）测区道路部分涉及临水临崖临坎路段、简易公路，陡坡弯道路段，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，危险路段，观察通行，切记盲目冒进；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）高边坡，临水边、沟边测绘时做好防范措施，严防人员防滑和防摔倒；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（9）测区午后易出现大风天气，作业中须做好预防措施；\n（10）高海拔地区气温变化大，极端天气多，带足御寒衣物；\n（11）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；\n（12）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（13）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（14）在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施保证安全，对不能保证安全的区域，应绕道而行\n（15）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目作业区域道路交通风险高，涉及冰雪道路、临坎临崖临边临江道路，务必督促驾驶员谨慎驾驶，野外测绘严格遵守安全操作规程，工作中严防人员滑倒摔伤', NULL, '2023-10-22', '2023-12-05');
INSERT INTO `cmc_safe` VALUES ('1648881410631270418', '1648881410631270418', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。 \n（二）本项目存在的危险（有害）因素有：钻机作业机械伤害、森林火险、高处坠落、物体打击、相关方安全管理风险、临时用工风险、消防安全、触电、摔伤、跌倒等风险。\n（三）针对隐患源制定的安全措施：\n（1）严格遵守桐子林水电站安全管理规定和项目合同有关安全管理制度，按要求编制好项目安全管理、文明施工等措施，作业前按要求办理好工作票，开展安全技术交底，方可开展作业；\n（2）作业中涉及水电站区域，电器设备、电线较多，工作中不得随意触碰电气设备，如涉及临时用电须安全要求履行审批手续，参与人员须持特种作业人员操作证件（电工证）；\n（3）项目涉及和相关方共同开展作业，须签订安全生产管理协议，明确各自安全职责，并对相关方安全生产工作统一协调、管理，定期（或者不定期）进行安全检查；\n（4）滑坡体测斜钻孔施工严格遵守钻机作业操作规程，作业前开展作业员安全教育培训，结合现场实际情况开展班前驾教育活动；\n（5）钻机作业存在机械伤害、物体打击、触电等安全风险，钻机安装应水平、稳固，各部件连接牢固。钻机立轴、天车及钻孔中心必须在一条直线上。应设有胶管防缠绕及水龙头防脱落装置；\n（6）钻机搬迁前应进行策划，提前制定搬迁线路及搬迁过程注意事项，对搬迁人员进行培训，搬迁前对搬迁线路进行查看，对危险地段提前采取安全标识、防护等措施，对大型钻机的搬迁应制定专项安全措施，经审批后严格实行；\n（7）开钻前应对机械各部位连接螺栓、动力系统、传力系统、升降系统、液压系统及制动装置等进行检查，确保运转正常；\n（8）下钻前必须仔细检查钻具、钻杆及接头，有裂纹或磨损过度、弯曲、丝扣过松等不得下入孔内；\n（9）钻进时严禁用手抓、扶水龙头和龙头胶管，防止脱落伤人及机械回转造成龙头胶管将人缠绕；\n（10）钻机设备运转中，严禁进行拆卸和修理，严禁挂皮带和打皮带蜡，严禁跨越皮带护栏，严禁用撬棍等拨皮带，严禁擦洗或触动运转部位，严禁离合器未分离就换挡；\n（11）作业区域属于高山峡谷地区，地质灾害风险相对高，在监测设备安装、测绘控制点选取等工作时，须对作业周边安全环境进行充分评估，杜绝在存在滑坡、边坡落石、陡岩等危险区域开展作业；\n（11）做好边坡落石、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作，遇5级以上大风、大雨、雷电等极端天气禁止开展外业作业；\n（12）在作业过程中，保持场地整洁，做好现场文明施工及周围的环境卫生；\n（13）在搬运设备、材料过程中，做好防护，防止脱落砸伤人员；\n（14）进入林区不得携带火种及吸烟，严格遵守当地政府森林草原防火规定，禁止吸烟区域严禁吸烟；\n（15）进入作业现场集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故发生；\n（16）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（17）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；\n（18）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（19）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（20）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（21）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（22）严格遵守《安全生产法》、《岩土工程勘察安全标准》等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '钻机作业中做好钻进、机组搬迁安全防护措施，严防机械伤害、物体打击等事故发生，规范相关方管理，做好日常班前安全教育活动。', NULL, '2023-10-31', '2024-06-12');
INSERT INTO `cmc_safe` VALUES ('1648881410631270419', '1648881410631270419', 80, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。 \n（二）本项目存在的危险（有害）因素有：高原病、自然灾害、森林火险、高处坠落、物体打击、相关方安全管理风险、临时用工风险、消防安全、触电、摔伤、跌倒等风险。\n（三）针对隐患源制定的安全措施：\n（1）严格遵守西藏琼结县农业农村局和项目合同有关安全管理制度，按要求编制好项目安全管理、文明施工等措施，开展安全技术交底，方可开展作业；\n（2）本项目涉及双乙方项目，工作中做好沟通协调工作；\n（3）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（4）时下正值寒冬季节，雾多、霜多、冰雪多、气温低，环境复杂，工作中严防森林（草原）火险，注意保暖防冻，高边坡，临水边、沟边作业时注意防滑和防摔倒；\n（5）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件；\n（6）本项目地处核心藏区，要求员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（7）在作业过程中，保持场地整洁，做好现场文明施工及周围的环境卫生；\n（8）在搬运设备、材料过程中，做好防护，防止脱落砸伤人员，临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（9）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（10）进入林区不得携带火种及吸烟，严格遵守当地政府森林草原防火规定，禁止吸烟区域严禁吸烟；\n（11）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查；\n（12）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（13）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（14）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（15）严格遵守《安全生产法》等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程；\n（16）如需与相关方共同开展作业时，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严格遵守西藏琼结县农业农村局和项目合同有关安全管理制度，本项目涉及双乙方项目，工作中做好沟通协调工作，加强相关方安全管理。', NULL, '2023-11-17', '2024-02-21');
INSERT INTO `cmc_safe` VALUES ('1648881410631270420', '1648881410631270420', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：淹溺、高原病、自然灾害、边坡落石（坠物）、道路交通（冰雪道路）、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）项目地处高原地区，作业前做好参与人员健康筛查，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品，注意饮食卫生；\n（3）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（4）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（5）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（6）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（7）做好临时驻地消防安全，做到人离开关闭所有电源；\n（8）野外行走注意观察周边环境，不冒险前行；\n（9）时下正值秋冬季节，藏区冰雪道路增多，提醒驾驶员谨慎驾驶，通往测区道路复杂，涉及临坎、临崖、临江边较多，须重点关注；\n（10）在设备搬运、安装、调试过程中，做好防护措施，预防人员滑到、摔伤；\n（11）本项目涉水作业较多，严格遵守水域作业安全管理规定，水上作业，2人以上成组作业，全程穿好救生衣；明确应急撤离信号，明确应急路线，并做到全员知晓；\n（12）严禁下河游泳、钓鱼、炸鱼等与工作无关的行为；\n（13）每次工作前检查船只有无安全隐患并排查；作业过程中，岸上设置观察员，时刻关注水上船只作业情况；\n（14）使用有人驾驶机动船只，应对船只进行检查，满足出航条件，库区测量船只必须由驾驶船只资格的人员驾驶；\n（15）野外作业必须有2人以上方可进行，作业人员应保持通讯通畅。明确应急撤离信号，全员是否知晓，明确应急路线；.\n（16）如需与相关方共同开展作业时，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及水域作业较多，须严格遵守安全操作规程，作业前查验船只及驾驶员合规性，并对船只安全性全面检查，全员穿戴好救生衣等劳动防护用品，现场派员做好安全监护。', NULL, '2023-11-17', '2023-12-25');
INSERT INTO `cmc_safe` VALUES ('1648881410631270421', '1648881410631270421', 59, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的危险（有害）因素有：道路交通、森林火险、淹溺、高处坠落、物体打击、消防安全、触电、摔伤、跌倒、高原病、动物伤害等风险。\n（三）针对隐患源制定的安全措施：\n（1）严格遵守国能青海黄河玛尔挡水电站安全管理制度和本合同安全管理要求，按要求编制好项目安全管理、文明施工等措施；\n（2）作业区域存在边坡落石等情况，工作中须高度重视，在断面布置时，尽可能考虑规避落石区域和陡峭地形；\n（3）严格遵守属地政府海事局相关规定，并办理作业许可；\n（4）作业中涉及水电站区域，电器设备、电线较多，工作中不得随意触碰电气设备；\n（5）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出差前检查防滑链等应急设备是否齐全；\n（6）水上作业和临水边作业须全程穿戴好符合要求的救生衣，选择合理行船速度，水上作业必须有2人以上方可进行，6级以上强风、大雨、雷电天气禁止水上作业；\n（7）工作人员严禁在库内游泳、戏水，严禁在船上和工作时间内饮酒；\n（8）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（9）在作业过程中，保持场地整洁，做好现场文明施工及周围的环境卫生；\n（10）在搬运设备、材料过程中，做好防护，防止脱落砸伤人员，在断面测量作业时工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过，所有人员须穿防滑鞋；\n（11）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚；\n（12）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（13）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程；\n（14）项目如需租用船只开展作业，须签订租船协议，并报备公司综合事务部，租用船只的行驶证、检验合格证须在有效期内，并具备相关营运资格，船只驾驶员及船工须熟悉施测区域水情；\n（15）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（16）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（17）采用无人船作业时，工作前应对船只各部件进行全面检查，操作者须熟悉船只性能、参数及熟练掌握船只操作技能，无人船电池充电时须有人值守；\n（18）岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳；\n（19）工作期间，如遇坝身泄洪或水位异常变化，人员和设备应立即撤离至安全地带；\n（20）本项目涉及相关单位参与作业，相关单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（21）本项目地处核心藏区，要求员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（22）项目地处高原地区，作业前做好参与人员健康筛查，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品，注意饮食卫生。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区存在边坡落石等情况，工作中须高度重视，在断面布置时，尽可能考虑规避落石区域和陡峭地形。在搬运设备、材料过程中，做好防护，防止脱落砸伤人员，在断面测量作业时工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过，所有人员须穿防滑鞋、救生衣、安全帽等劳动防护用品。', NULL, '2023-11-22', '2023-11-29');
INSERT INTO `cmc_safe` VALUES ('1648881410631270422', '1648881410631270422', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：水下地形测量溺水、水准测量安全风险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于攀枝花市境内，本项目涉及控制网边角测绘、水准测量、倒垂测量、一二等水准测量和水下地形测量，安全风险较高，请项目负责人高度重视生产安全，提高全员安全意识；\n（2）严格遵守大唐观音岩水电站业主各项安全管理规定，服从业主管理；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）作业区域处于水电站区域，工作时禁止触碰与工作无关的电气设备，工作现场禁止吸烟，野外作业禁止携带火种；\n（5）严禁在库内游泳、戏水、钓鱼，严禁酒后作业，测量期间，如遇坝身泄洪或水位异常变化，人员和设备应立即撤离至安全地带；\n（6）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（8）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（9）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（10）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（11）采用无人船作业时，工作前应对船只各部件进行全面检查，操作者须熟悉船只性能、参数及熟练掌握船只操作技能，全员穿戴好符合要求的救生衣，无人船电池充电时须有人值守;\n（12）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（13）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头；', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严格遵守大唐观音岩水电站业主各项安全管理规定，服从业主管理，水下地形测量人员穿戴好救生衣等劳动防护用品，作业现场安排人员安全监护。', NULL, '2023-11-24', '2024-06-11');
INSERT INTO `cmc_safe` VALUES ('1648881410631270423', '1648881410631270423', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：边坡落石、自然灾害、冬季道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）检查车辆车况，特别是与安全相关的方向、刹车等部位，随时提醒驾驶员选择合理车速，临坎、临崖、临边及冰雪道路（特别是下坡）等危险路段谨慎驾驶，结合路况及时安装防滑链；\n（3）在调绘工作中，人员比较分散，测区无手机信号，须携带对讲机，大家随时保持联系；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（8）工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（11）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '外业测绘中注意防范边坡落石，涉及交叉作业区域提前与相关单位做好沟通协调，目前正值岁末年初、数九寒天加强项目日常安全监管，工作中及时制止和纠正不安全行为。', NULL, '2023-12-27', '2024-04-01');
INSERT INTO `cmc_safe` VALUES ('1648881410631270424', '1648881410631270424', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：边坡落石、自然灾害、冬季道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁携带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头；\n（2）检查车辆车况，特别是与安全相关的方向、刹车等部位，随时提醒驾驶员选择合理车速，临坎、临崖、临边及冰雪道路（特别是下坡）等危险路段谨慎驾驶，结合路况及时安装防滑链；\n（3）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（4）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气等不安全心理因素；\n（5）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（6）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（7）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（8）测区午后存在大风等情况，遇5级及以上大风天气停止野外作业。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '沿大渡河边采集检查点等作业时，穿防滑鞋，严防人员滑到摔伤。', NULL, '2024-01-09', '2024-05-24');
INSERT INTO `cmc_safe` VALUES ('1648881410631270425', '1648881410631270425', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：边坡落石（坠物）、道路交通、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《四川省安全生产条例》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）本项目涉及和相关单位共同开展作业，工作中做好协调够沟通工作，避免产生矛盾;\n（3）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（4）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（5）项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（6）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（7）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（8）野外行走注意观察周边环境，不冒险攀登陡坡；\n（9）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2024-01-09', '2024-04-01');
INSERT INTO `cmc_safe` VALUES ('1648881410631270426', '1648881410631270426', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患:高处坠落、边坡落石（坠物）、道路交通、冬季交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）康定地区当下正处于寒冬天气，测区存在冰雪道路、暗冰路段，提醒驾驶员谨慎驾驶，选择合理车速，结冰路段下坡须高度警惕；\n（3）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（4）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（6）在人、车流量大的道路作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌(墩)，并安排专人担任安全警戒员。迁站时要撤除安全警示标志牌(墩)，肩扛器材时应纵向，防止发生意外；\n（7）项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（8）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（9）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守.', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '康定地区当下正处于寒冬天气，测区存在冰雪道路、暗冰路段，提醒驾驶员谨慎驾驶，选择合理车速，结冰路段下坡须高度警惕', NULL, '2024-01-12', '2024-04-01');
INSERT INTO `cmc_safe` VALUES ('1648881410631270427', '1648881410631270427', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：边坡落石、自然灾害、冬季道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）检查车辆车况，特别是与安全相关的方向、刹车等部位，随时提醒驾驶员选择合理车速，临坎、临崖、临边及冰雪道路（特别是下坡）等危险路段谨慎驾驶，结合路况及时安装防滑链；\n（3）在调绘工作中，人员比较分散，测区无手机信号，须携带对讲机，大家随时保持联系；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（8）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（10）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '无人机飞行作业严格遵守安全操作规程，当前正值岁末年初，人员情绪容易波动，加强项目人员安全教育，发现不安全行为及时制止，参与人员中有较多的吸烟者，进入林区须严格管理，严禁在林区吸烟。', NULL, '2024-01-18', '2024-04-01');
INSERT INTO `cmc_safe` VALUES ('1648881410631270428', '1648881410631270428', 143, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：高原病、无人机飞行风险、边坡落石、自然灾害、冬季道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）时下正值森林（草原）防火严管期，所有外业生产人员严格遵守属地政府森林（草原）防火管理规定，现场负责人须严格管理，所有人员（包括现场临聘人员）不得带火种进入林区，不得在林区吸烟，发现违规者，公司将严肃处理；\n（2）野外驾驶中涉及临边、临坎、临崖、临江（河）及冰雪道路等危险路段时须谨慎驾驶，切记冒险通过，结合路况及时安装防滑链；\n（3）在调绘工作中，人员比较分散，测区个别地方无手机信号，须携带对讲机，大家随时保持联系；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）本项目地处核心藏区，要求员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（8）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（11）无人机航飞作业须严格遵守公司测绘作业安全操作规程，飞行前做好相关飞行许可报备，航线设计符合相关规定，无人机操控人员应具备航空管理部门或机构认可的安全操作资格，飞机通电时，应确保人员远离螺旋桨，以防螺旋桨转动伤人，无人机电池使用前应对电池进行检查，避免电池因使用不当造成事故；\n（12）冬季来临，气温逐渐下降，进入呼吸道感染、支原体肺炎的高发季节，工作、生活中做好防范措施，讲究个人卫生，必要时佩戴口罩，勤通风，减少食用生、冷食物，如遇发烧、乏力、头痛等症状规范就医。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目进出场路途遥远、冰雪道路较多，提醒驾驶员结合路况及时安装防滑链，危险路段谨慎驾驶，项目作业区域超过4000米，出发前做好人员健康情况筛查，储备必要的预防高原病药品，严格遵守属地政府森林防火规定，进入作业区严禁吸烟，无人机飞行作业严格遵守安全操作规程。', NULL, '2024-01-18', '2024-06-21');
INSERT INTO `cmc_safe` VALUES ('1648881410631270429', '1648881410631270429', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：极端寒潮暴雪等天气风险、道路交通风险、消防安全、无人机飞行风险、水下地形淹溺、滑到摔伤等。 \n（三）作业中须注意的安全措施（注意事项）：\n（1）本项目进场时间正值国内大面积寒潮、暴雪、冰冻天气，须提前关注、收集路途、测区气象信息，合理安排进场和作业时间；\n（2）工作中部分地形图测绘地块涉及铁路须提前和相单位做好沟通、协调；\n（3）水下地形测绘全员穿戴好救生衣，保证安全站位，施测前将测区相关的影像资料发送至专职安全员；\n（4）高山峡谷地区野外作业，严防边坡落石，危险路段观察通行；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）测区道路部分属于乡村道路、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（7）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（8）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过；\n（9）生产项目在工作前做好充分准备，提前关注、了解目的地（测区）气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底；\n（10）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，秋冬季时电器火灾高发期，火灾风险大，务必引起重视，做到人离断电；\n（11）采用无人船作业时，工作前应对船只各部件进行全面检查，操作者须熟悉船只性能、参数及熟练掌握船只操作技能，无人船电池充电时须有人值守；\n（12）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度；\n（13）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目进场时间正值国内大面积寒潮、暴雪、冰冻等极端天气，须提前关注、收集路途、测区气象信息，合理安排进场和作业时间，工作中部分地形图测绘地块涉及铁路须提前和相单位做好沟通、协调，水下地形测绘全员穿戴好救生衣，保证安全站位。', NULL, '2024-02-22', '2024-04-30');
INSERT INTO `cmc_safe` VALUES ('1648881410631270430', '1648881410631270430', 76, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：水下地形测量中淹溺、边坡落石、自然灾害、道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目涉及水下地形测量，工作中沿河道测量时，保证安全站位，穿好救生衣、防滑鞋，做好安全管控措施；\n（2）野外驾驶中涉及临边、临坎、临崖、临江（河）及冰雪道路等危险路段时须谨慎驾驶，切记冒险通过，结合路况及时安装防滑链；\n（3）在调绘、控制点采集等工作中，人员比较分散，保证通讯畅通，大家随时保持联系；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（9）近期气温逐渐下降，进入呼吸道感染、支原体肺炎的高发季节，工作、生活中做好防范措施，讲究个人卫生，必要时佩戴口罩，勤通风，减少食用生、冷食物，如遇发烧、乏力、头痛等症状规范就医。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及水下地形测量（断面），工作中沿河道测量时，保证安全站位，穿好救生衣、防滑鞋，做好安全管控措施,严防人员滑到、摔伤事故发生。', NULL, '2024-02-28', '2024-05-31');
INSERT INTO `cmc_safe` VALUES ('1648881410631270431', '1648881410631270431', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：森林防火、无人机飞行风险、边坡落石、自然灾害、道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）时下正值森林（草原）防火严管期，所有外业生产人员严格遵守属地政府森林（草原）防火管理规定，现场负责人须严格管理，所有人员（包括现场临聘人员）不得带火种进入林区，不得在林区吸烟，发现违规者，公司将严肃处理；\n（2）野外驾驶中涉及临边、临坎、临崖、临江（河）及冰雪道路等危险路段时须谨慎驾驶，切记冒险通过，结合路况及时安装防滑链；\n（3）在调绘工作中，人员比较分散，测区个别地方无手机信号，须携带对讲机，大家随时保持联系；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（9）无人机航飞作业须严格遵守公司测绘作业安全操作规程，飞行前做好相关飞行许可报备，航线设计符合相关规定，无人机操控人员应具备航空管理部门或机构认可的安全操作资格，飞机通电时，应确保人员远离螺旋桨，以防螺旋桨转动伤人，无人机电池使用前应对电池进行检查，避免电池因使用不当造成事故；\n（10）近期气温逐渐下降，进入呼吸道感染、支原体肺炎的高发季节，工作、生活中做好防范措施，讲究个人卫生，必要时佩戴口罩，勤通风，减少食用生、冷食物，如遇发烧、乏力、头痛等症状规范就医。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '无人机飞行前结合现场实际和相关人员做好沟通，得到飞行许可后，方可开展工作，野外林区作业所有人员不得携带火种，不得在林区和禁止吸烟区域吸烟，地形图调绘、控制点采集工作中穿好防滑鞋，严防人员滑到摔伤情况发生。', NULL, '2024-02-28', '2024-06-06');
INSERT INTO `cmc_safe` VALUES ('1648881410631270432', '1648881410631270432', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：边坡落石、自然灾害、道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目涉及像控点采集、地形图调绘等工作，野外作业时间不长，工作量不大，工作中督促人员穿好防滑鞋，临坎、临边等作业时保证安全站位，做好安全管控措施；\n（2）野外驾驶中涉及临边、临坎、临崖、临江（河）及冰雪道路等危险路段时须谨慎驾驶，切记冒险通过，结合路况及时安装防滑链；\n（3）在调绘、控制点采集等工作中，人员比较分散，保证通讯畅通，大家随时保持联系；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及像控点采集、地形图调绘等工作，野外作业时间不长，工作量不大，工作中督促人员穿好防滑鞋，临坎、临边等作业时保证安全站位，做好安全管控措施.', NULL, '2024-03-08', '2024-05-23');
INSERT INTO `cmc_safe` VALUES ('1648881410631270433', '1648881410631270433', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：边坡落石、道路交通风险、消防安全、水下地形淹溺、滑到摔伤等。 \n（三）作业中须注意的安全措施（注意事项）：\n（1）水下地形测绘全员穿戴好救生衣，保证安全站位，施测前将测区相关的影像资料发送至专职安全员；\n（2）高山峡谷地区野外作业，严防边坡落石，危险路段观察通行；\n（3）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（4）测区道路部分属于乡村道路、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（5）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过；\n（6）生产项目在工作前做好充分准备，提前关注、了解目的地（测区）气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底；\n（7）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，秋冬季时电器火灾高发期，火灾风险大，务必引起重视，做到人离断电；\n（8）采用无人船作业时，工作前应对船只各部件进行全面检查，操作者须熟悉船只性能、参数及熟练掌握船只操作技能，无人船电池充电时须有人值守；\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '水下地形测量中，无人船收放船只选择安全位置，操作人员穿戴好劳动防护用品，野外作业严防人员滑到摔伤', NULL, '2024-03-15', '2024-05-31');
INSERT INTO `cmc_safe` VALUES ('1648881410631270434', '1648881410631270434', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：边坡落石、森林火险、消防安全、高处坠落、触电、动物伤害、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于甘孜州境内，外业测绘中涉及无人机等航飞作业、控制测绘、测区属于高山峡谷、要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务，无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（3）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备。\n（4）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（7）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（9）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（10）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '目前正值雅江森林防火严管期，所有人员不得携带火种进入林区，不得在林区吸烟，雅江至测区路段边坡落时有发生，须重点防范。', NULL, '2024-03-15', '2024-04-30');
INSERT INTO `cmc_safe` VALUES ('1648881410631270435', '1648881410631270435', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：边坡落石、森林火险、消防安全、高处坠落、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目作业区域海拔（3600至4100米）较高，出发前做好人员身体筛查，合理安排作业时间，工作期间注意自身身体状况，出现不适症状需立即报告公司；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）项目区域海拔较高，环境温度较低，请参加人员严格遵守四川省、阿坝自治州以及阿坝县各项规章要求，并注意防风保暖；\n（4）工作中严格遵守民族风俗习惯，遇事冷静沟通，及时汇报，禁止与当地居民发生争执，避免冲突；\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（7）测区道路通行条件较差，存在较多的土路、简易公路，坡度也较大，提醒驾驶员临坎、临边、临江等危险路段谨慎驾驶，不可盲目冒进；\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（9）工作中严防摔伤、砸伤、滑倒，临坎临边临江作业时保证安全站位；\n（10）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（12）进场前，应把进场测绘人员姓名、身份证号、联系方式等人员信息发甲方予以汇总，甲方将给政府进行报备；\n（13）测区可能存在部分区域无通讯信号，须携带对讲机等通讯设备，工作中保证通讯畅通，单人作业时做好随时联系。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区海拔较高（3600至4100米），做好人员健康筛查，工作区域道路通行条件较差存在土路、简易公路等情况，提高警惕，危险路段观察通行，不盲目冒进，工作中携带对讲机，保证通信畅通，单人作业时做到随时联系。', NULL, '2024-03-19', '2024-06-06');
INSERT INTO `cmc_safe` VALUES ('1648881410631270436', '1648881410631270436', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：淹溺、动物伤害、边坡落石、自然灾害、测区大风、道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）测区道路涉及临水临崖临坎路段、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（3）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（4）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（5）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（6）本项目地处核心藏区，要求员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（7）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（8）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（10）作业区域蚂存在蝗、蜱虫、蛇等动物伤害，工作中做好防范措施，项目须储备必要的预防、治疗药品；\n（11）加强项目租用车辆、租用驾驶员安全管理，特别是冰雪道路行驶须高度警惕，谨慎驾驶，结合路况及时安装防滑链；\n（12）本项目涉及水下地形断面测量，须严格遵守安全操作规程，穿戴好防滑鞋、救生衣等劳动防护用品，施测区域水温较低，严防人员落水事故发生，收、放无人船须选择安全位置;\n（13）开展安全生产自查自纠，定期对人员进行安全教育和安全交底，安全教育和安全交底工作的开展须结合作业环境和工作内容。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '河道断面测量涉及临水边作业，须严格遵守安全操作规程，工作中涉及临边临江临崖等危险区域时，做好安全防护措施，保证人员安全站位，林区作业时加强森林防火宣传教育，所有人员林区不得携带火种，严禁吸烟。', NULL, '2024-04-01', '2024-04-25');
INSERT INTO `cmc_safe` VALUES ('1648881410631270437', '1648881410631270437', 94, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全风险：森林防火、高处坠落、边坡落石、高原病、道路交通风险、消防安全、标识牌制作搬运人员摔伤、砸伤等。 \n（三）作业中须注意的安全措施（注意事项）：\n（1）本项目涉及和相关单位配合测量、标识牌制作、搬运、安装等，安全风险相对较高，项目人员须高度重视安全工作；\n（2）高山峡谷地区野外作业，严防边坡落石，危险路段观察通行；\n（3）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（4）项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行；\n（5）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（6）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（7）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过；\n（8）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（9）生产项目在工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底；\n（10）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，秋冬季时电器火灾高发期，火灾风险大，务必引起重视，做到人离断电。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及土建作业较多，须严格遵守甲方安全管理规定，特别是在标牌建造、埋设等工作中做好防护措施，严防高处坠落，人员砸伤摔伤，作业区域内所有人员不得携带火种，严禁吸烟。', NULL, '2024-04-01', '2024-05-23');
INSERT INTO `cmc_safe` VALUES ('1648881410631270438', '1648881410631270438', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：边坡落石、森林火险、消防安全、高处坠落、触电、动物伤害、淹溺、交通风险、作业中摔伤砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于西藏林芝地区境内，外业测绘中涉及控制测绘、公路放线、测区属于高山峡谷、要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理；\n（2）公路放线测量工作中涉及临边临坎临崖等区域较多，作业中严防人员滑到摔伤，危险区域不得贸然进入；\n（3）林芝地区蚂蟥、蜱虫等较多，工作前做好人员健康排查，储备必要的药品，发现蚂蟥、蜱虫等伤害，规范就医；\n（4）公路放线工作涉及和相关方共同开展作业，工作中须做好沟通协调，避免产生矛盾；\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素；\n（7）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度。\n（9）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过；\n（10）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '公路放线测量工作中涉及临边临坎临崖等区域较多，作业中严防人员滑到摔伤，危险区域不得贸然进入；林芝地区蚂蟥、蜱虫等较多，工作前做好人员健康排查，储备必要的药品，发现蚂蟥、蜱虫等伤害，规范就医，项目如需租用车辆，须对车况和驾驶员驾驶技术严格把关，加强道路交通安全提醒、教育培训。', NULL, '2024-04-07', '2024-06-19');
INSERT INTO `cmc_safe` VALUES ('1648881410631270439', '1648881410631270439', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高原病、边坡落石、森林火险、消防安全、高处坠落、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目作业区域海拔（3670-4150m）较高，出发前做好人员身体健康筛查，合理安排作业时间，工作期间注意作业人员身体状况，出现不适症状需规范就医并及时报告公司；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）项目区域海拔较高，环境温度较低，注意防风保暖；\n（4）工作中严格遵守民族风俗习惯，遇事冷静沟通，及时汇报，禁止与当地居民发生争执，避免冲突；\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（7）测区道路通行条件较差，存在较多的土路、简易公路，坡度也较大，提醒驾驶员临坎、临边、临江等危险路段谨慎驾驶，不可盲目冒进；\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（9）工作中严防摔伤、砸伤、滑倒，临坎临边临江作业时保证安全站位；\n（10）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头；\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（12）测区可能存在部分区域无通讯信号，须携带对讲机等通讯设备，工作中保证通讯畅通，单人作业时做好随时联系。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '历史上木里县常常发生森林火灾，所有人员进入测区不得携带火种，野外作业严禁吸烟，测区海拔较高，项目须储备预防高原病的药品，做好人员健康筛查，测区部分存在土路、简易公路，督促驾驶员谨慎驾驶，危险路段不冒险前行，无人机航飞作业严格遵守安全操作规程,部分工作区域可能存在通讯不畅，须携带对讲机等通讯设备，工作中保证通讯畅通，单人作业时做好随时联系。', NULL, '2024-04-10', '2024-05-17');
INSERT INTO `cmc_safe` VALUES ('1648881410631270440', '1648881410631270440', 60, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患及时整改率100%。\n（二）本项目存在的安全风险：无人机飞行、水下地形测量中淹溺、边坡落石、自然灾害、道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目涉及水下地形测量，工作中沿河道测量时，保证安全站位，穿好救生衣、防滑鞋，做好安全管控措施；\n（2）野外驾驶中涉及临边、临坎、临崖、临江（河）及冰雪道路等危险路段时须谨慎驾驶，切记冒险通过，结合路况及时安装防滑链；\n（3）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（4）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（5）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（6）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（7）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（8）项目如需使用无人机开展航测作业，须严格遵守安全操作规程，无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '水下地形测量作业时严格遵守安全操作规程，穿戴好救生衣等劳动防护用品，工作前对测区全面踏勘，辨识危险源，落实管控措施。', NULL, '2024-04-24', '2024-05-17');
INSERT INTO `cmc_safe` VALUES ('1648881410631270441', '1648881410631270441', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患及时整改100%。\n（二）本项目存在的安全风险：无人机飞行风险、高原病、动物伤害、边坡落石、自然灾害、道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）检查车辆车况，特别是与安全相关的方向、刹车等，随时提醒驾驶员选择合理车速，临坎、临崖、临边及冰雪道路（特别是下坡）等危险路段谨慎驾驶，结合路况及时安装防滑链；\n（3）在调绘工作中，人员比较分散，测区个别地方无手机信号，须携带对讲机，大家随时保持联系；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）本项目地处核心藏区，要求员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（8）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（11）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '近期藏区春雪较多，本次项目面包车防滑性能较差，危险路段提醒驾驶员谨慎驾驶，无人机飞行前须对各固件全面检查，杜绝发生坠机等机械事故，测区海拔较高，做好人员身体健康筛查，合理安排野外作业时间，所有人员进入林区不得携带火种，严禁在林区吸烟。', NULL, '2024-04-24', '2024-05-14');
INSERT INTO `cmc_safe` VALUES ('1648881410631270442', '1648881410631270442', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患及时整改100%。\n（二）本项目存在的安全风险：无人机飞行风险、高原病、边坡落石、自然灾害、道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）检查车辆车况，特别是与安全相关的方向、刹车等，随时提醒驾驶员选择合理车速，临坎、临崖、临边及冰雪道路（特别是下坡）等危险路段谨慎驾驶，结合路况及时安装防滑链；\n（3）在调绘工作中，人员比较分散，测区个别地方无手机信号，须携带对讲机，大家随时保持联系；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）本项目地处核心藏区，要求员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（8）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（11）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2024-04-24', '2024-04-25');
INSERT INTO `cmc_safe` VALUES ('1648881410631270443', '1648881410631270443', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患及时整改率100%。\n（二）本项目存在的安全风险：无人机飞行风险、边坡落石、自然灾害、道路交通、森林防火、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）外业测绘必须遵守各地方、各部门相关的安全规定，项目兼职安全员应随时检查现场的安全情况，发现安全隐患立即整改；\n（2）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能，野外驾驶中涉及临边、临坎、临崖、临江（河）及冰雪道路等危险路段时须谨慎驾驶，切记冒险通过，结合路况及时安装防滑链；\n（3）在调绘、控制点采集等工作中，人员比较分散，保证通讯畅通，大家随时保持联系；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）遇雷电天气应立刻停止作业，选择安全地点躲避，禁止在山顶、开阔的斜坡上、大树下、河边等区域停留，避免遭受雷电袭击，在高压输电线路、电网等区域作业时，应采取必要安全防范措施，避免人员和标尺、测杆、棱镜支杆等测量设备靠近高压线路，严禁使用非绝缘的标尺、测杆、棱镜支杆等；\n（7）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（9）作业人员应遵守本单位的安全生产管理制度和操作细则，爱护和正确使用仪器、设备、工具及安全防护装备，服从安全管理，了解其作业场所、工作岗位存在的危险因素及防范措施；外业人员还应掌握和了解必要的野外生存、避险等基本应急知识和技能；\n（10）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（11）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机的任务，无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人；\n（12）无人机操控人员应具备航空管理部门或机构所认可的安全操作资格。起飞时，无关人员应远离起飞地点20m开外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（13）无人机电池充电时，作业员不应长时间离开，禁止在人员睡眠期间进行充电。单次使用前应进行外观电路电压的检查并做好相应记录，避免电池使用不当造成事故；\n（14）项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（15）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '无人机航飞作业严格遵守安全操作规程，飞行前须到相关部门进行飞行前报备，得到许可后方可开展作业，起飞前须对无人机各固件全面检查，杜绝飞行事故发生。', NULL, '2024-04-29', '2024-05-24');
INSERT INTO `cmc_safe` VALUES ('1648881410631270444', '1648881410631270444', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患及时整改100%。\n（二）本项目存在的安全风险：无人机飞行风险、高原病、动物伤害、边坡落石、自然灾害、道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）检查车辆车况，特别是与安全相关的方向、刹车等，随时提醒驾驶员选择合理车速，临坎、临崖、临边及冰雪道路（特别是下坡）等危险路段谨慎驾驶，结合路况及时安装防滑链；\n（3）在调绘工作中，人员比较分散，测区个别地方无手机信号，须携带对讲机，大家随时保持联系；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（8）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（11）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '无人机航测作业前须到相关部门报备，许可后方可开展作业，飞行前对各固件全面检查，杜绝发生机械事故，所有人员进入林区不得携带火种，不得在林区吸烟，雅江县城至牙根二级电站路段，边坡落石严重须重点关注。', NULL, '2024-05-06', '2024-05-22');
INSERT INTO `cmc_safe` VALUES ('1648881410631270445', '1648881410631270445', 63, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患及时整改率100%。\n（二）本项目存在的安全风险：汛期自然灾害、道路交通风险、消防安全、界桩制作搬运风险、临时用工、滑到摔伤、边坡落石等。 \n（三）作业中须注意的安全措施（注意事项）：\n（1）本项目涉及界桩制作、搬运、安装等土建作业，须加强现场临时用工等安全监管和日常安全提醒；\n（2）野外作业中涉及临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（3）外业测绘必须遵守各地方、各部门相关的安全规定，项目兼职安全员应随时检查现场的安全情况，发现安全隐患立即整改；\n（4）高山峡谷地区野外作业，严防边坡落石，危险路段观察通行；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）测区道路部分属于乡村道路、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（7）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（8）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（9）生产项目在工作前做好充分准备，提前关注、了解目的地（测区）气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底；\n（10）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，秋冬季时电器火灾高发期，火灾风险大，务必引起重视，做到人离断电；\n（11）野外作业中预防中暑和晒伤，配备防暑药品，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物，严防犬、毒蜂、蛇、蜱虫等动物伤害；\n（12）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度；\n（13）野外工作中有沟、槽、孔、洞，通过湿滑路面时，注意脚下，防止滑倒、摔倒等事故发生；\n（14）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（15）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '界桩制作、搬运、安装过程中安全风险相对较高，做好安全管控措施，严防作业人员滑到摔伤事故发生，时下正值汛期，极端天气（暴雨、雷电天气、大风等）暂停野外作业，进出场路途遥远，提醒驾驶员不疲劳驾驶、分心驾驶，危险路段不冒险前行。', NULL, '2024-05-15', '2024-05-20');
INSERT INTO `cmc_safe` VALUES ('1648881410631270446', '1648881410631270446', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患及时整改率100%。\n（二）本项目存在的安全安全风险：汛期自然灾害、高处坠落、边坡落石（坠物）、道路交通、无人机飞行风险、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守《安全生产法》、《四川省安全生产条例》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）作业前对项目业主对于安全管理要求全面了解，并严格遵守地方及业主安全相关的安全管理规定；\n（3）无人机飞行作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（4）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能，不分心驾驶、疲劳驾驶；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（8）在人、车流量大的道路作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌(墩)，并安排专人担任安全警戒员；\n（9）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（10）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（11）督促人员做好健康筛查，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（12）加强班组安全管理，开展好班前安全教育活动；\n（13）作业前，调查了解气候情况，关注天气变化，大风、大雨、雷电等极端天气禁止外出测量；\n（14）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（15）高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣；\n（16）在调绘、控制点采集等工作中，人员比较分散，保证通讯畅通，随时保持联系。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '汛期来临，自然灾害有所增加，工作中严防边坡落石，遇大风、大雨、雷电等极端天气暂停野外作业，在调绘、控制点采集等工作中，人员比较分散，保证通讯畅通，随时保持联系。', NULL, '2024-05-22', '2024-06-15');
INSERT INTO `cmc_safe` VALUES ('1648881410631270447', '1648881410631270447', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在主要安全风险：消防安全、交通安全等。 \n（三）针对安全风险制定安全管控措施：\n（1）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，夏季是电器火灾高发期，所有人员离开办公室关闭电源；\n（2）资料应做好备份，以防丢失；保管好设备防止丢失；\n（3）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定；\n（4）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外；\n（5）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目无外业，安全风险分级属于低风险，须做好日常办公室消防安全，督促作业员离开办公室关闭电源、门窗，提醒员工上下班遵守道路交通法律法规，做好道路交通安全。', NULL, '2024-05-24', '2024-06-06');
INSERT INTO `cmc_safe` VALUES ('1648881410631270448', '1648881410631270448', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患及时整改率100%。\n（二）本项目存在的安全风险：边坡落石、自然灾害、道路交通、森林防火、消防安全、动物伤害、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）外业测绘必须遵守各地方、各部门相关的安全规定，项目安全员应随时检查现场的安全情况，发现安全隐患立即整改；\n（2）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，野外驾驶中涉及临边、临坎、临崖、临江（河）及冰雪道路等危险路段时须谨慎驾驶，切记冒险通过，结合路况及时安装防滑链；\n（3）本项目水边线测量时穿戴好救生衣、穿防滑鞋，沿河滩行走时提高警惕，严防人员滑到摔伤；\n（4）遇雷电天气应立刻停止作业，选择安全地点躲避，禁止在山顶、开阔的斜坡上、大树下、河边等区域停留，避免遭受雷电袭击，在高压输电线路、电网等区域作业时，应采取必要安全防范措施，避免人员和标尺、测杆、棱镜支杆等测量设备靠近高压线路，严禁使用非绝缘的标尺、测杆、棱镜支杆等；\n（5）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（6）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准；\n（7）作业人员应遵守本单位的安全生产管理制度和安全操作规程，爱护和正确使用仪器、设备、工具及安全防护装备，服从安全管理，了解其作业场所、工作岗位存在的危险因素及防范措施；外业人员还应掌握和了解必要的野外生存、避险等基本应急知识和技能；\n（8）借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意\n（10）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守\n（11）在人、车流量大的道路及城区作业时，应穿着色彩醒目的安全警示反光马夹（背心），必要时应设置安全警示标志牌(墩)，并安排专人担任安全监护；\n（12）野外作业中预防中暑和晒伤，配备防暑药品，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物，严防犬、毒蜂、蛇、蜱虫等动物伤害。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '水边线测量时穿戴好救生衣、穿防滑鞋，沿河滩行走时提高警惕，严防人员滑到摔伤', NULL, '2024-06-07', '2024-06-19');
INSERT INTO `cmc_safe` VALUES ('1648881410631270449', '1648881410631270449', 94, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患及时整改率100%。\n（二）本项目存在的安全风险：高原病、无人机飞行风险、边坡落石、自然灾害、道路交通、森林防火、消防安全、动物伤害、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目进出场路途遥，提醒驾驶员长途行车不疲劳驾驶、超速行驶，当下318正值旅游旺季，车辆较多，选择合理车速；\n（2）外业测绘必须遵守各地方、各部门相关的安全规定，项目兼职安全员应随时检查现场的安全情况，发现安全隐患立即整改；\n（3）在调绘、控制点采集等工作中，人员比较分散，保证通讯畅通，随时保持联系；\n（4）野外作业中涉及临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）遇雷电天气应立刻停止作业，选择安全地点躲避，禁止在山顶、开阔的斜坡上、大树下、河边等区域停留，避免遭受雷电袭击，在高压输电线路、电网等区域作业时，应采取必要安全防范措施，避免人员和标尺、测杆、棱镜支杆等测量设备靠近高压线路，严禁使用非绝缘的标尺、测杆、棱镜支杆等；\n（7）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准；\n（9）作业人员应遵守本单位的安全生产管理制度和安全操作规程，爱护和正确使用仪器、设备、工具及安全防护装备，服从安全管理，了解其作业场所、工作岗位存在的危险因素及防范措施；外业人员还应掌握和了解必要的野外生存、避险等基本应急知识和技能；\n（10）借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（11）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机的任务，无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人；\n（12）无人机操控人员应具备航空管理部门或机构所认可的安全操作资格。起飞时，无关人员应远离起飞地点20m开外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（13）无人机电池充电时，作业员不应长时间离开，禁止在人员睡眠期间进行充电，避免电池使用不当造成事故；\n（14）项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（15）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意\n（16）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守\n（17）在人、车流量大的道路及城区作业时，应穿着色彩醒目的安全警示反光马夹（背心），必要时应设置安全警示标志牌(墩)，并安排专人担任安全监护；\n（18）野外作业中预防中暑和晒伤，配备防暑药品，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物，严防犬、毒蜂、蛇、蜱虫等动物伤害\n（19）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（20）测区道路条件较差，遇陡坡弯急、临水临崖临坎路段、汛期泥泞路面、简易公路等危险路段须先下车查看，不冒险前行；\n（21）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目进出场路途遥远，当下正值318国道旅游旺季，车辆较多，提醒驾驶员不疲劳驾驶、分心驾驶、超速行驶；测区部分区域存在无通讯信号，项目须配置对讲机等通讯设备，无信号区域不得单人作业，无人机飞行严格遵守安全操作规程。', NULL, '2024-06-07', '2024-06-17');
INSERT INTO `cmc_safe` VALUES ('1648881410631270450', '1648881410631270450', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患及时整改率100%。\n（二）本项目存在的安全风险：汛期自然灾害、边坡落石、道路交通、森林防火、消防安全、动物伤害、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）ML及JW临时界桩项目作业时间较长（预计2个月），作业时间段正值主汛期，安全风险相对较高，项目参与人员思想上高度安全生产工作；\n（2）项目进出场路途遥远，提醒驾驶员出发前对车辆全面检查，不得病车和车用应急工具不全上路，318川藏线当下正值旅游季节，车辆较多，不疲劳驾驶，不分心驾驶，项目如需租用车辆，须对车辆车况全面排查，加强租车驾驶员安全监管；\n（3）临时界桩项目和相关方共同参与作业较多，工作中做好沟通、协调，避免和当地村民产生矛盾；\n（4）野外作业中涉及临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）遇雷电天气应立刻停止作业，选择安全地点躲避，禁止在山顶、开阔的斜坡上、大树下、河边等区域停留，避免遭受雷电袭击，在高压输电线路、电网等区域作业时，应采取必要安全防范措施，避免人员和标尺、测杆、棱镜支杆等测量设备靠近高压线路，严禁使用非绝缘的标尺、测杆、棱镜支杆等；\n（7）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准；\n（9）作业人员应遵守本单位的安全生产管理制度和安全操作规程，爱护和正确使用仪器、设备、工具及安全防护装备，服从安全管理，了解其作业场所、工作岗位存在的危险因素及防范措施；外业人员还应掌握和了解必要的野外生存、避险等基本应急知识和技能；\n（10）借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（11）项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（12）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意\n（13）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守\n（14）在人、车流量大的道路及城区作业时，应穿着色彩醒目的安全警示反光马夹（背心），必要时应设置安全警示标志牌(墩)，并安排专人担任安全监护；\n（15）野外作业中预防中暑和晒伤，配备防暑药品，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物，严防犬、毒蜂、蛇、蜱虫等动物伤害。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '临时界桩施测工作中做好相关方沟通、协调，避免和当地村民产生矛盾，JM区域作业时严防蚂蟥、蜱虫等动物伤害，作业时间段正值主汛期，工作中高度重视汛期自然灾害，特别是预防边坡落石。', NULL, '2024-06-17', '2024-06-18');
INSERT INTO `cmc_safe` VALUES ('1648881410631270451', '1648881410631270451', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：无人机飞行安全、道路交通、消防安全、物体打击、摔伤滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（4）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气等不安全心理因素；\n（5））出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全；\n（6）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（7）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（8）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '无人机飞行作业严格遵守安全操作规程，岁末年初、数九寒天野外作业做好御寒保暖', NULL, '2024-01-05', '2024-05-11');
INSERT INTO `cmc_safe` VALUES ('1648881410631270452', '1648881410631270452', 72, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：边坡落石、自然灾害、道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）项目地处广西河池地区，路途遥远，进出场主要在西南出海通道高速行驶，要求驾驶员不疲劳驾驶、分心驾驶；\n（2）本项目工期紧，当下正值岁末年初，人员情绪容易波动，增加了一定安全风险，项目负责人加强日常安全管理，工作中做好安全提醒，及时制止和纠正不安全行为\n（3）临空临边作业必须采取防滑、防坠措施，外业测绘作业中保证安全站位，确保人员和设备安全；\n（4）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气等不安全心理因素；\n（5）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（6）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（7）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（8）测区午后存在大风等情况，遇5级及以上大风天气停止野外作业；\n（9）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（10）广西河池地区常常有蛇出没，野外作业做好防范措施。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目地处广西河池地区，进出场路途遥远，提醒驾驶员不疲劳驾驶、分心驾驶，工期紧，当下正值岁末年初，人员情绪容易波动，增加了一定安全风险，现场负责人加强日常安全管理，工作中做好安全提醒，及时制止和纠正不安全行为，无人机飞行作业严格遵守安全操作规程。', NULL, '2024-01-15', '2024-03-29');
INSERT INTO `cmc_safe` VALUES ('1648881410631270453', '1648881410631270453', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全安全风险：高处坠落、边坡落石（坠物）、道路交通、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）项目地处攀枝花市境内，作业中涉及水温测量、测斜孔数据测读、水准测量、监测点控制点测量等，项目员工须高度重视安全生产工作，提升全员安全意识、落实全员安全责任制；\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和二滩电厂有关安全管理规定及公司有关安全生产规章制度；\n（3）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（4）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（5）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件；\n（6）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（7）项目期临时聘用人员近10人，须加强日常安全教育培训和工作中安全提醒；\n（8）野外作业要注意毒蛇、毒蜂等危害动物，携带必要的防护用品和药品；\n（9）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（10）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（11） 岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳。水上作业应穿救生衣，及时观察水域附近情况；\n（12）野外作业不得吸烟，携带火种, 严格遵守四川省、攀枝花和二滩电厂关于森林防火规定；\n（13）项目时间较长，合理安排员工休假，关注员工心理状态；\n（14）野外作业必须有2人以上方可进行，作业人员应保持通讯通畅。明确应急撤离信号，全员是否知晓，明确应急路线；\n（15）不得在住宿地或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（16）加强日常消防安全管理，注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守，人离开办公室做到人离断电；\n（17）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目属于公司外派机构，作业时间长，规范日常人员休假和外出管理，严格遵守二滩电厂安全管理规定，项目期临时聘用人员近10人，须加强日常安全教育培训和工作中安全提醒，夜间边角网测量时须严格遵守操作规程。', NULL, '2024-01-29', '2024-06-12');
INSERT INTO `cmc_safe` VALUES ('1648881410631270454', '1648881410631270454', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全安全风险：高处坠落、边坡落石（坠物）、道路交通、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）项目地处攀枝花市境内，作业中涉及水温测量、测斜孔数据测读、水准测量、监测点控制点测量等，项目员工须高度重视安全生产工作，提升全员安全意识、落实全员安全责任制；\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和二滩电厂有关安全管理规定及公司有关安全生产规章制度；\n（3）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（4）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（5）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件；\n（6）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（7）项目期临时聘用人员近10人，须加强日常安全教育培训和工作中安全提醒；\n（8）野外作业要注意毒蛇、毒蜂等危害动物，携带必要的防护用品和药品；\n（9）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（10）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（11） 岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳。水上作业应穿救生衣，及时观察水域附近情况；\n（12）野外作业不得吸烟，携带火种, 严格遵守四川省、攀枝花和二滩电厂关于森林防火规定；\n（13）项目时间较长，合理安排员工休假，关注员工心理状态；\n（14）野外作业必须有2人以上方可进行，作业人员应保持通讯通畅。明确应急撤离信号，全员是否知晓，明确应急路线；\n（15）不得在住宿地或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（16）加强日常消防安全管理，注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守，人离开办公室做到人离断电；\n（17）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目属于公司外派机构，作业时间长，规范日常人员休假和外出管理，严格遵守二滩电厂安全管理规定，项目期临时聘用人员近10人，须加强日常安全教育培训和工作中安全提醒，夜间边角网测量时须严格遵守操作规程。', NULL, '2024-01-30', '2024-04-15');
INSERT INTO `cmc_safe` VALUES ('1648881410631270455', '1648881410631270455', 120, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：施工区机械伤害、高原病、边坡落石（坠物）、道路交通、消防安全、森林防火、物体打击、淹溺、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）测量中心属于公司外派机构，中心须结合实际建立全员安全生产责任制和其他安全生产管理制度、应急预案，建立安全组织机构，任命兼职安全管理员；\n（2）严格遵守四川省脚木足河巴拉水电站业主及相关单位安全管理规定；\n（3）施工区所有测量人员佩戴好安全帽、反光背心、手套等安全防护用品；\n（4）测绘现场作业中要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所；\n（5）禁止在交叉作业下方等危险区域停留，严禁在起重工作区域内行走或停留；\n（6）测量区域涉及两个及以上单位，做好沟通、协调及安全管理工作；\n（7）在施工区作业时，应随时关注工区内爆破警报，警报拉响后要及时停止作业，并在爆破安全距离外躲避，防止爆破产生的飞石对人员和设备造成伤害；\n（8）工作中不得随意触碰各类电器设备；\n（9）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（10）工作区域部分道路条件较差，遇陡坡弯急、临水临崖临坎路段、汛期泥泞路面、简易公路等危险路段须先下车查看，不冒险前行，须加强项目临聘驾驶员日常道路交通安全教育培训，行车过程中选择合理车速；\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（12）参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（13）不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（14）高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣；\n（15）所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（16）加强日常住宿地和办公区消防安全管理，规范使用电器设备，做到人离断电，冬季天气寒冷，规范使用取暖设备。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测量中心属于公司外派机构，须严格遵守业主及相关单位安全管理规定，马尔康至业主营地路途存在边坡落石情况须重点关注，中心合同时间长，规范人员出勤、休假管理，并留下管理痕迹，现场临聘2人，须购买人身意外伤害保险，意外伤害保额不得低于100万', NULL, '2024-02-02', '2024-02-28');
INSERT INTO `cmc_safe` VALUES ('1648881410631270456', '1648881410631270456', 120, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：施工区机械伤害、高原病、边坡落石（坠物）、道路交通、消防安全、森林防火、物体打击、淹溺、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）测量中心属于公司外派机构，中心须结合实际建立全员安全生产责任制和其他安全生产管理制度、应急预案，建立安全组织机构，任命兼职安全管理员；\n（2）严格遵守双江口水电站业主及相关单位安全管理规定；\n（3）施工区所有测量人员佩戴好安全帽、反光背心、手套等安全防护用品；\n（4）测绘现场作业中要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所；\n（5）禁止在交叉作业下方等危险区域停留，严禁在起重工作区域内行走或停留；\n（6）测量区域涉及两个及以上单位，做好沟通、协调及安全管理工作；\n（7）在施工区作业时，应随时关注工区内爆破警报，警报拉响后要及时停止作业，并在爆破安全距离外躲避，防止爆破产生的飞石对人员和设备造成伤害；\n（8）工作中不得随意触碰各类电器设备；\n（9）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（10）工作区域部分道路条件较差，遇陡坡弯急、临水临崖临坎路段、汛期泥泞路面、简易公路等危险路段须先下车查看，不冒险前行，须加强项目临聘驾驶员日常道路交通安全教育培训，行车过程中选择合理车速；\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（12）参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（13）不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（14）高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣；\n（15）所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（16）加强日常住宿地和办公区消防安全管理，规范使用电器设备，做到人离断电，冬季天气寒冷，规范使用取暖设备。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测量中心属于公司外派机构，须严格遵守业主及相关单位安全管理规定，中心合同时间长，规范人员出勤、休假管理，并留下管理痕迹，现场临聘2人，须购买人身意外伤害保险，意外伤害保额不得低于100万', NULL, '2024-02-02', '2024-02-28');
INSERT INTO `cmc_safe` VALUES ('1648881410631270457', '1648881410631270457', 121, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：施工区机械伤害、边坡落石（坠物）、道路交通、消防安全、森林防火、物体打击、淹溺、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）测量中心属于公司外派机构，中心须结合实际建立全员安全生产责任制和其他安全生产管理制度、应急预案，建立安全组织机构，任命兼职安全管理员；\n（2）严格遵守金川水电站业主及相关单位安全管理规定；\n（3）施工区所有测量人员佩戴好安全帽、反光背心、手套等安全防护用品；\n（4）测绘现场作业中要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所；\n（5）禁止在交叉作业下方等危险区域停留，严禁在起重工作区域内行走或停留；\n（6）测量区域涉及两个及以上单位，做好沟通、协调及安全管理工作；\n（7）在施工区作业时，应随时关注工区内爆破警报，警报拉响后要及时停止作业，并在爆破安全距离外躲避，防止爆破产生的飞石对人员和设备造成伤害；\n（8）工作中不得随意触碰各类电器设备；\n（9）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（10）工作区域部分道路条件较差，遇陡坡弯急、临水临崖临坎路段、汛期泥泞路面、简易公路等危险路段须先下车查看，不冒险前行，须加强项目临聘驾驶员日常道路交通安全教育培训，行车过程中选择合理车速；\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（12）参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（13）不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（14）高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣；\n（15）所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（16）加强日常住宿地和办公区消防安全管理，规范使用电器设备，做到人离断电，冬季天气寒冷，规范使用取暖设备。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严格遵守金川水电站业主及相关单位安全管理规定，做好日常中心安全教育培训，规范人员出勤、休假管理，留下管理痕迹。', NULL, '2024-02-02', '2024-02-22');
INSERT INTO `cmc_safe` VALUES ('1648881410631270458', '1648881410631270458', 121, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：施工区机械伤害、边坡落石（坠物）、道路交通、消防安全、森林防火、物体打击、淹溺、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）测量中心属于公司外派机构，中心须结合实际建立全员安全生产责任制和其他安全生产管理制度、应急预案，建立安全组织机构，任命兼职安全管理员；\n（2）严格遵守业主及相关单位安全管理规定；\n（3）施工区所有测量人员佩戴好安全帽、反光背心、手套等安全防护用品；\n（4）测绘现场作业中要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所；\n（5）禁止在交叉作业下方等危险区域停留，严禁在起重工作区域内行走或停留；\n（6）测量区域涉及两个及以上单位，做好沟通、协调及安全管理工作；\n（7）在施工区作业时，应随时关注工区内爆破警报，警报拉响后要及时停止作业，并在爆破安全距离外躲避，防止爆破产生的飞石对人员和设备造成伤害；\n（8）工作中不得随意触碰各类电器设备；\n（9）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（10）工作区域部分道路条件较差，遇陡坡弯急、临水临崖临坎路段、汛期泥泞路面、简易公路等危险路段须先下车查看，不冒险前行，须加强项目临聘驾驶员日常道路交通安全教育培训，行车过程中选择合理车速；\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（12）参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（13）不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（14）高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣；\n（15）所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（16）加强日常住宿地和办公区消防安全管理，规范使用电器设备，做到人离断电，冬季天气寒冷，规范使用取暖设备。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '中心临聘人员较多，须购买意外伤害不低于100万理赔的商业保险，加强日常安全教育和提醒。', NULL, '2024-02-02', '2024-02-22');
INSERT INTO `cmc_safe` VALUES ('1648881410631270459', '1648881410631270459', 122, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：施工区机械伤害、高原病、边坡落石（坠物）、道路交通、消防安全、森林防火、物体打击、淹溺、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）测量中心属于公司外派机构，中心须结合实际建立全员安全生产责任制和其他安全生产管理制度、应急预案，建立安全组织机构，任命兼职安全管理员；\n（2）严格遵守两河口水电站业主及相关单位安全管理规定；\n（3）施工区所有测量人员佩戴好安全帽、反光背心、手套等安全防护用品；\n（4）测绘现场作业中要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所；\n（5）禁止在交叉作业下方等危险区域停留，严禁在起重工作区域内行走或停留；\n（6）测量区域涉及两个及以上单位，做好沟通、协调及安全管理工作；\n（7）在施工区作业时，应随时关注工区内爆破警报，警报拉响后要及时停止作业，并在爆破安全距离外躲避，防止爆破产生的飞石对人员和设备造成伤害；\n（8）工作中不得随意触碰各类电器设备；\n（9）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（10）工作区域部分道路条件较差，遇陡坡弯急、临水临崖临坎路段、汛期泥泞路面、简易公路等危险路段须先下车查看，不冒险前行，须加强项目临聘驾驶员日常道路交通安全教育培训，行车过程中选择合理车速；\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（12）参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（13）不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（14）高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣；\n（15）所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（16）加强日常住宿地和办公区消防安全管理，规范使用电器设备，做到人离断电，冬季天气寒冷，规范使用取暖设备。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严格遵守两河口水电站及相关单位安全管理规定，项目后期提醒中心员工对于安全工作不能懈怠，提高安全防范意识。', NULL, '2024-02-28', '2024-03-01');
INSERT INTO `cmc_safe` VALUES ('1648881410631270460', '1648881410631270460', 109, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：森林火险、高处坠落、机械伤害、消防安全、触电、高原反应（病）、摔伤、跌倒、动物伤害等风险。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守国网西藏电力有限公司拉萨发电公司及下属公司（电厂）安全管理制度，按要求编制好项目安全管理、文明施工等措施。\n（2）安全监测作业中需要临时用工时，用工前须购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥。\n（3）作业中涉及水电站区域，电器设备、电线较多，工作中不得随意触碰电气设备。\n（4）项目车辆做好日常维护保养，不得病车上路，驾驶员不得疲劳驾驶，分心驾驶，危险路段谨慎通行。\n（5）提前关注、了解测区气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和班前安全活动。\n（6）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（7）项目地处高原地区，进场前对参与人员做好健康筛查，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，尽可能避免食用生、冷等食品。\n（8）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程。\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（12）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（13）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。\n（14）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避\n（15）日常监测野外工作中，保证人员安全站位，特别是涉及临边、临坎、临江等作业时，须做好管控措施，确保生产安全。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严格遵守业主安全管理规定，项目车辆属于现场租用，须对车况及驾驶员严格把关，确保道路交通安全，项目涉及临时用工，加强日常安全教育培训，做好工作中安全提醒，须购买意外商业保险，意外伤害保额不得低于100万', NULL, '2024-03-07', '2024-06-14');
INSERT INTO `cmc_safe` VALUES ('1648881410631270461', '1648881410631270461', 109, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：森林火险、高处坠落、机械伤害、消防安全、触电、高原反应（病）、摔伤、跌倒、动物伤害等风险。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守国网西藏电力有限公司拉萨发电公司及下属公司（电厂）安全管理制度，按要求编制好项目安全管理、文明施工等措施。\n（2）安全监测作业中需要临时用工时，用工前须购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥。\n（3）作业中涉及水电站区域，电器设备、电线较多，工作中不得随意触碰电气设备。\n（4）项目车辆做好日常维护保养，不得病车上路，驾驶员不得疲劳驾驶，分心驾驶，危险路段谨慎通行。\n（5）提前关注、了解测区气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和班前安全活动。\n（6）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（7）项目地处高原地区，进场前对参与人员做好健康筛查，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，尽可能避免食用生、冷等食品。\n（8）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程。\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（12）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（13）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。\n（14）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避\n（15）日常监测野外工作中，保证人员安全站位，特别是涉及临边、临坎、临江等作业时，须做好管控措施，确保生产安全。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严格遵守业主安全管理规定，项目车辆属于现场租用，须对车况及驾驶员严格把关，确保道路交通安全，项目涉及临时用工，加强日常安全教育培训，做好工作中安全提醒，须购买意外商业保险，意外伤害保额不得低于100万', NULL, '2024-03-07', '2024-06-14');
INSERT INTO `cmc_safe` VALUES ('1648881410631270462', '1648881410631270462', 116, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（3）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患及时整改率100%。\n（二）本项目存在的安全风险:钻机作业机械伤害、高处坠落、边坡落石（坠物）、道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定管控措施：\n（1）严格遵守《安全生产法》、《水电水利工程钻探规程》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）岩土勘察作业前，应对危险源进行辨识和评价，编写勘察纲要时，应根据不同危险等级制定相应的安全生产防护措施；\n（3）岩土勘察作业点不宜布置在高压输电线路下方，当勘察作业点布置在地上架空线、地下管线、设施以及构筑物的安全保护范围内时，安全生产防护措施应符合地上架空线、地下管线设施及构筑物所有者的有关管理规定；\n（4）作业场地四周应设置安全警示标志、围挡、隔离带或防撞设施等，夜间应设置安全警示灯，作业人员应穿反光背心；\n（5）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（6）\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁等不安全心理因素；\n（8）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（10）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（11）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（12）本项目涉及相关方参与作业，开展工作前须签订安全分管协议，参与作业的单位须具备相关作业资质和作业许可，项目负责人做好勘察作业过程中安全监管，并留下管理痕迹；\n（13）告知作业人员作业场所和工作岗位存在的危险源、安全生产防护措施和安全生产事故应急救援预案；\n（14）岩土勘察作业期间，与勘察作业无关的人员不得进入勘察作业场地；\n（15）岩土勘察设备启动后，作业人员不得离开作业岗位，非作业人员未经许可不得触碰勘察设备；\n（16）高处作业人员应佩戴有安全锁的安全带，安全带的使用和保管应符合现行国家标准《安全带》（GB 6095）的有关规定；\n（17）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。', '（一）涉密计算机和涉密信息系统管理要求。涉密信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录； \n（三）涉密计算机外接设备管理要求。存储、处理涉密信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '钻机作业须严格遵守安全操作规程，工作中严防机械伤害，本项目涉及相关方参与作业，开展工作前须签订安全分管协议，参与作业的单位须具备相关作业资质和作业许可，项目负责人做好勘察作业过程中安全监管，并留下管理痕迹。', NULL, '2024-05-07', '2024-06-11');
INSERT INTO `cmc_safe` VALUES ('1648881410631270463', '1648881410631270463', 72, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患及时整改100%。\n（二）本项目存在的安全风险：淹溺、高原病、动物伤害、边坡落石、汛期自然灾害、道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本次河道断面测量地域较多，沿江作业多，涉及水边作业，安全风险相对较高，出发前针对性开展作业人员安全教育培训，工作中督促大家严格遵守安全操作规程；\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）本次项目道路交通尤为重要，沿江（河）行车路段较多，出发前检查车辆车况，特别是与安全相关的方向、刹车等，随时提醒驾驶员选择合理车速，临坎、临崖、临边危险路段谨慎驾驶；\n（3）测区部分区域存在边坡落石等情况，在断面基点选择时须观察地质情况，不冒险作业；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（8）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（11）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目河道断面测量涉及区域较多，临边临坎临江（河）作业做好防范措施，保证安全站位，收放无人船选择安全区域，全员穿戴好救生衣，工作中提醒驾驶员注意交通安全，占道停车时摆放好警示标志。', NULL, '2024-05-11', '2024-06-25');
INSERT INTO `cmc_safe` VALUES ('1648881410631270464', '1648881410631270464', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患及时整改率100%。\n（二）本项目存在的安全安全风险：汛期自然灾害、高处坠落、边坡落石（坠物）、道路交通、水下地形测量淹溺、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守《安全生产法》、《四川省安全生产条例》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）作业前对项目电站业主对于安全管理要求全面了解，并严格遵守地方及业主安全相关的安全管理规定；\n（3）本项目涉及水下地形图和断面测量，坝前个别断面施测难度较大，地形复杂，水流较快，作业中全面查看、了解，不冒险作业，确保人员设备安全，水边作业严格遵守安全操作规程，穿戴好救生衣等劳动防护用品；\n（4）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能，不分心驾驶、疲劳驾驶；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（8）在人、车流量大的道路作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌(墩)，并安排专人担任安全警戒员；\n（9）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（10）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（11）加强班组安全管理，开展好班前安全教育活动；\n（12）作业前，调查了解气候情况，关注天气变化，大风、大雨、雷电等极端天气禁止外出测量；\n（13）高边坡，临水边、沟边测绘时注意防滑和防摔倒。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严格遵守电站业主安全管理规定，项目涉及临坎临崖作业区域较多，须做好人员安全提醒和防护措施，坝前个别断面施测难度较大，地形复杂，水流较快，作业中全面查看、了解，不冒险作业，确保人员和设备安全，水边作业严格遵守安全操作规程，穿戴好救生衣等劳动防护用品。', NULL, '2024-05-24', '2024-05-30');
INSERT INTO `cmc_safe` VALUES ('1648881410631270465', '1648881410631270465', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、水下地形测量中淹溺、汛期自然灾害（地质灾害、气象灾害）、交通安全、消防安全、作业中摔伤，滑到等。 \n（三）针对安全风险制定的安全管控措施：\n（1）本项目涉及无人机航测作业、水下地形施测、控制测绘等工作，当下正值汛期，野外作业安全风险相对较高，项目人员须高度重视安全工作，工作中不违章作业、违章指挥、违反劳动纪律；\n（2）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人驾驶航空器飞行管理暂行条例》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（7）野外作业中涉及临边、临坎、临江作业时，提高警惕，做好安全防护措施；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（10）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生;\n（11）外业工作做好预防中暑和晒伤，配备防暑药品，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物。外业工作中配备安全设备和药品，预防犬、毒蜂、蛇等动物伤害；\n（12）外业作业时做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理；\n（13）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（14）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾；\n（15）水下地形测量中，所有作业人员须穿戴好符合要求的救生衣，风浪太大时段不能强行作业，水流湍急地段要根据实地具体情况采取相应安全防护措施后方可作业；\n（16）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及无人机航测作业、水下地形施测、控制测绘等工作，当下正值汛期，野外作业安全风险相对较高，项目人员须高度重视安全工作，工作中不违章作业、违章指挥、违反劳动纪律，严格遵守安全操作规程。', NULL, '2024-06-20', '2024-06-25');
INSERT INTO `cmc_safe` VALUES ('1648881410631270466', '1648881410631270466', 145, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：高原病、汛期自然灾害、高海拔地区大风危害、道路交通、消防安全、无人机飞行安全、物体打击、动物伤害、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目作业区域海拔超过4000米，高原病防范非常很重要，出发前购置预防高原反应和应急药品，对参与人员身体进行健康筛查；\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）测区道路部分属于乡村道路、临水临崖临坎路段、汛期泥泞路面、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）高边坡，临水边、沟边测绘时注意防滑和防摔倒；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（9）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（10）测区部分区域无手机信号，须佩戴对讲机等通讯设备，作业员随时保持联系，高海拔地区野外作业尽可能保证两人同行；\n（11）理塘午后易出现大风天气，作业中须做好预防措施；\n（12）高海拔地区气温变化大，极端天气多，带足御寒衣物\n（13）测区无通讯信号区域不得单人作业，工作中做好防动物伤害措施；\n（14）工作中对于不安全行为要及时制止，不得违章指挥、违章作业、违反劳动纪律\n（15）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区周边有雷达站，作业前做好沟通协调，许可后方可开展无人机飞行作业，理塘海拔较高，早晚温差大，提醒作业员带足御寒衣物，318国道正值旅游旺季，车多人多，注意交通安全，沿公路作业和须占道停车时做好防范措施。', NULL, '2024-06-20', '2024-06-20');
INSERT INTO `cmc_safe` VALUES ('1648881410631270467', '1648881410631270467', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：高原病、汛期自然灾害、高海拔地区大风危害、道路交通、消防安全、无人机飞行安全、物体打击、动物伤害、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目作业区域海拔超过4000米，高原病防范非常很重要，出发前购置预防高原反应和应急药品，对参与人员身体进行健康筛查；\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）测区道路部分属于乡村道路、临水临崖临坎路段、汛期泥泞路面、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）高边坡，临水边、沟边测绘时注意防滑和防摔倒；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（9）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（10）测区部分区域无手机信号，须佩戴对讲机等通讯设备，作业员随时保持联系，高海拔地区野外作业尽可能保证两人同行；\n（11）理塘午后易出现大风天气，作业中须做好预防措施；\n（12）高海拔地区气温变化大，极端天气多，带足御寒衣物\n（13）测区无通讯信号区域不得单人作业，工作中做好防动物伤害措施；\n（14）工作中对于不安全行为要及时制止，不得违章指挥、违章作业、违反劳动纪律\n（15）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '当下正值汛期，野外作业提前关注气象、地质灾害信息，极端天气暂停野外作业，如需夜间平面观测，不得单人作业，沿公路水准测量时做好安全防护措施，进出场路途遥远提醒驾驶员不疲劳驾驶、分心驾驶，严格遵守业主单位各项安全管理规定。', NULL, '2024-06-26', '2024-06-26');
-- INSERT INTO `cmc_safe` VALUES ('1648881410631270468', '1648881410631270468', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全安全风险：汛期地质灾害、气象灾害、高处坠落、边坡落石（坠物）、道路交通、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。\n（三）针对安全风险制定的管控措施：\n（1）严格遵守水口集团公司水口电站安全管理规定，提前按业主要求，完善安全资料提交；\n（2）项目进出场跨省，路途遥远，提醒驾驶员不疲劳驾驶、分心驾驶；\n（3）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（4）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（5）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件；\n（6）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（7）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（8）野外作业要注意毒蛇、毒蜂等危害动物，携带必要的防护用品和药品；\n（9）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（10）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（11） 沿公路水准测量时，做好安全防护措施，穿戴好劳动防护用品；\n（12）野外作业不得吸烟，携带火种, 严格遵守属地政府森林防火规定；\n（13）野外作业必须有2人以上方可进行，作业人员应保持通讯通畅。明确应急撤离信号，全员是否知晓，明确应急路线；\n（14）不得在住宿地或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（15）加强日常消防安全管理，注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守，人离开办公室做到人离断电；\n（16）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目进出场路途遥远，当下318国道车辆较多，督促驾驶员不疲劳驾驶、分心驾驶，危险路段（陡坡急弯、泥泞道路、临边临坎路段等）谨慎驾驶，无人机飞行作业严格遵守安全操作规程，测区存在蚂蟥、蜱虫、毒蛇等出没，工作中做好防护措施，进入主汛期严防泥石流、坍塌、雷电、山洪等自然灾害。', NULL, '2024-07-10', '2024-07-10');
-- INSERT INTO `cmc_safe` VALUES ('1648881410631270469', '1648881410631270469', 59, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改率100%。\n（二）本项目存在的安全安全风险：汛期自然灾害、高处坠落、边坡落石（坠物）、无人机飞行风险、交通安全、消防安全、物体打击、摔伤，滑到等\n（三）安全风险管控措施\n（1）本项目作业区域地处新疆喀什地区莎车县，项目涉及无人机航测作业、控制测等工作，项目全体人员作业前掌握本职工作中存在安全风险和管控措施，结合现场实际开展针对性安全教育培训；\n（2）无人机飞行作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）作业前，调查了解气候情况，关注天气变化，大风大雨雷电禁止外出测量和作业；\n（4）项目进出场路途遥远，单边接近4000公里，督促驾驶员不疲劳驾驶、分心驾驶，测区道路条件较差，遇陡坡弯急、临水临崖临坎路段、汛期泥泞路面、简易公路等危险路段须先下车查看，不冒险前行，驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（7）高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣；\n（8）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（9）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（10）使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（11）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（12）作业区域涉及少数民簇较多，作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（13）严格遵守合同内及业主方有关安全管理规定。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '进出场路途遥远（单边近4000公里），督促驾驶员不疲劳驾驶、分心驾驶，无人机航飞作业严格遵守安全操作规程，喀什地区少数民族较多，尊重民族风俗习惯。', NULL, '2024-07-11', '2024-07-11');
INSERT INTO `cmc_safe` VALUES ('1648881410643853314', '1648881410643853314', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：高原病、边坡落石（坠物）、城区道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）本项目作业区域在拉萨城区，要求驾驶员遵守道路交通规定，临时停车做好安全防护措施和过往行人、车辆安全警示；\n（3）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外\n（4）本项目涉及相关方参与作业，作业前签订安全管理协议、开展员工安全教育培训，项目负责人做好项目过程中安全监管，并留下记录；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（8）临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣；\n（9）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（10）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守。\n\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及相关方参与作业，作业前签订安全管理协议、开展员工安全教育培训，项目负责人做好项目过程中安全监管，并留下记录', NULL, '2023-04-07', '2024-04-03');
INSERT INTO `cmc_safe` VALUES ('1648881410660630529', '1648881410660630529', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（7）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（8）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为;\n（9）控制点在选点时须对周边地质情况初步判断，不得太临近沟边、坎边，保证作业时相对处于安全环境。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目进驻现场后及时开展安全教育培训，并留下记录，工作中严防人员摔伤、滑到事故发生。', NULL, '2023-03-30', '2024-03-29');
INSERT INTO `cmc_safe` VALUES ('1648881410677407746', '1648881410677407746', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患:钻机作业机械伤害、高处坠落、边坡落石（坠物）、道路交通、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《水电水利工程钻探规程》《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案;\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3） 各测量小组至少保证两人同行，禁止单独行动，相互保持通讯畅通；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）大风、雷电、暴雨等恶劣天气时禁止作业；\n（6）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；\n（7）本项目相关方参与作业，相关单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作；\n（8）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（9）开展安全生产自查自纠，定期对人员进行安全教育和安全交底，安全教育和安全交底工作的开展须结合作业环境和工作内容。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '做好相关方安全监管，作业前结合项目实际开展安全教育培训，并留下记录，做好项目实施过程中安全检查。', NULL, '2023-03-29', '2023-07-20');
INSERT INTO `cmc_safe` VALUES ('1648881410694184962', '1648881410694184962', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：高原病、边坡落石（坠物）、道路交通、无人机飞行风险、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）测区道路条件较差，危险路段须先下车查看，不冒险前行，驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（4）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（8）高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣；\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（10）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（11）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守。\n\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '加强临沟边、临水边、坎边作业安全管理，务实开展班组安全管理，并留下记录', NULL, '2023-03-22', '2023-09-01');
INSERT INTO `cmc_safe` VALUES ('1648881410710962177', '1648881410710962177', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：无人机飞行安全风险、森林火险、消防安全、交通安全、边坡坠物（落石）及动物伤害等\n（三）针对隐患源制定的安全措施：\n（1）作业前做好安全防护用品、急需的野外作业的应急药品的准备。\n（2）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路。\n（3）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育。\n（4）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（8）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（9）参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁等不安全心理因素；\n（10）工作中严防人员摔伤、砸伤、滑倒，河滩沼泽地谨慎通过；\n（11）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '工作中严防人员摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。', NULL, '2023-03-18', '2024-03-26');
INSERT INTO `cmc_safe` VALUES ('1648881410727739393', '1648881410727739393', 143, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主责的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：道路交通、无人机飞行风险、交通安全、消防安全、森林防火、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于阿坝州境内，项目参与人员严格遵守公司安全管理制度、测绘作业安全操作规程，工作前做好物资准备、身体健康筛查等；\n（2）项目须储备必要的防高原病药品。注意饮食卫生，尽可能避免食用生、冷等食品；\n（3）出差（出工）中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故；\n（4）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育；\n（5）加强交通安全管理，长途行车不得疲劳驾驶，提醒驾驶员注意休息，驾驶人员遵章守纪，不得超速行驶、酒后驾驶，等违章行为，危险路段不冒险前行；\n（6）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（7）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度；\n（8）森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（9）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '加强班组安全管理，针对作业中不安全行为现场负责人要及时制止纠正。', NULL, '2023-03-18', '2023-12-20');
INSERT INTO `cmc_safe` VALUES ('1648881410744516610', '1648881410744516610', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：边坡落石、森林火险、消防安全、高处坠落、触电、动物伤害、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于甘孜州境内，外业测绘中涉及无人机等航飞作业、控制测绘、测区属于高山峡谷、要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务，无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（3）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备。\n（4）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（7）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（9）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（10）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '遵守属地政府森林防火规定，无人航飞作业严格遵守安全操作规程，工作中严防人员滑倒、摔伤事故。', NULL, '2023-03-18', '2024-03-29');
INSERT INTO `cmc_safe` VALUES ('1648881410761293825', '1648881410761293825', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：森林火险、高处坠落、物体打击、消防安全、消防安全、摔伤、滑到等风险。\n（三）针对隐患源制定的安全措施：\n（1）严格遵守业主（盐源县自然资源局）相关安全管理规定；\n（2）本项目涉及土建作业较多，在基坑开挖、材料搬运等作业中严防物体打击和人员滑到摔伤事故发生；\n（3）作业前穿戴好手套、安全帽、反光背心等劳动防护用品；\n（4）工作中不得酒后作业、嬉戏打闹，爱护环境，不得随意丢弃垃圾；\n（5）按公司要求加强临时用工管理，做好安全教育培训和工作中安全提醒；\n（6）项目负责人（现场负责人）及时制止和纠正不安全行为，结合项目实际开展班组安全管理；\n（7）严格遵守属地政府森林防火管理规定，所有人员在作业区域不得吸烟，不得带火种进入林区；\n（8）作业区域涉及乡村道路、危险路段，加强驾驶员安全管理，不疲劳驾驶、分心驾驶，不病车上路；\n（9）在项目实施期间，所有人员不得私自外出，离开驻地须得到项目负责人许可；\n（10）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；\n（11）作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全排查，了解住宿环境、安全通道、消防设备位置，禁止入宿存在安全隐患的房屋。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及土建作业较多，在基坑开挖、材料搬运等作业中严防物体打击和人员滑到摔伤事故发生。', NULL, '2023-03-14', '2024-05-31');
INSERT INTO `cmc_safe` VALUES ('1648881410778071042', '1648881410778071042', 39, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主责的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：道路交通、无人机飞行风险、交通安全、消防安全、森林防火、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（4）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（5）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过；\n（6）测区道路部分属于乡村道路、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行，驾驶员出差（出工）期间严禁饮酒；\n（7）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟；\n（8）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素；\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（10）项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '目前正值西藏地区森林防火严管期，项目外业作业人员不得带火种到测区，严禁在林区吸烟，工作中严防人员滑倒摔伤事故发生，不冒险作业。', NULL, '2023-03-12', '2023-12-11');
INSERT INTO `cmc_safe` VALUES ('1648881410790653953', '1648881410790653953', 39, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主责的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：道路交通、无人机飞行风险、交通安全、消防安全、森林防火、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（4）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（5）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过；\n（6）测区道路部分属于乡村道路、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行，驾驶员出差（出工）期间严禁饮酒；\n（7）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟；\n（8）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素；\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（10）项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本次外业作业人员中有抽烟的同事，项目负责人须严格管理，严禁带火种到测区，严禁林区吸烟，测区道路狭窄弯多，请提醒驾驶员危险路段谨慎通过，不冒险前行。', NULL, '2023-03-12', '2024-05-07');
INSERT INTO `cmc_safe` VALUES ('1648881410815819777', '1648881410815819777', 35, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、赌气等不安全心理因素；\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（7）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（8）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '加强现场班组安全管理，并做好安全管理 记录，工作中杜绝侥幸心理', NULL, '2023-03-04', '2023-06-28');
INSERT INTO `cmc_safe` VALUES ('1648881410832596993', '1648881410832596993', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：高原病、边坡落石（坠物）、道路交通、无人机飞行风险、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）测区道路条件较差，危险路段须先下车查看，不冒险前行，驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（4）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（8）高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣；\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（10）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（11）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守。\n\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '水下地形测量中严格遵守公司相关安全管理规定，不冒险作业，加强班组安全管理并留下管理痕迹。', NULL, '2023-03-04', '2024-05-02');
INSERT INTO `cmc_safe` VALUES ('1648881410849374209', '1648881410849374209', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、赌气等不安全心理因素；\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（7）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（8）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '做好无人机飞行报备，作业中严防工伤事故发生', NULL, '2023-03-04', '2023-08-22');
INSERT INTO `cmc_safe` VALUES ('1648881410866151425', '1648881410866151425', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患:高原病、高处坠落、边坡落石（坠物）、道路交通、无人机飞行风险、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。\n（三）针对隐患源制定的安全措施：\n（1）本项目涉及和相关方开展作业，进场前须签订安全管理协议，项目负责人做好过程中安全监管，并留下管理痕迹；\n（2）督促人员做好健康筛查，有严重的心脏、肾部、肺部、肝部、高血压等疾病或医师嘱咐者不宜进入高原，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（3）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头；\n（5）测区道路部分属于乡村道路、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（6）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过；\n（7）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（8）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（9）岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳。水上作业应穿救生衣，及时观察水域附近情况。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '加强相关方安全管理，签订管理协议（建议采用修编后的版本），做好藏区春季森林防火管理。', NULL, '2023-03-02', '2024-04-11');
INSERT INTO `cmc_safe` VALUES ('1648881410878734337', '1648881410878734337', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的危险源及安全风险：森林火险、消防安全、高处坠落、触电、动物伤害、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于牙根I级水电站区域，外业测绘中涉及无人机等航飞作业、控制测绘、水下地形测绘等，测区属于高山峡谷、要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备。\n（3）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（4）水下地形测量中，所有作业人员须穿戴好符合要求的救生衣，风浪太大时段不能强行作业，水流湍急地段要根据实地具体情况采取相应安全防护措施后方可作业。\n（5）采用无人船作业时，工作前应对船只各部件进行全面检查，操作者须熟悉船只性能、参数及熟练掌握船只操作技能，无人船电池充电时须有人值守。\n（6）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害。\n（12）测区道路部分属于乡村道路、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（13）', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目负责人督促员工进入林区不得带火种，测区边坡落石严重须重点防滑，所有作业须严格遵安全操作规程', NULL, '2023-03-01', '2024-03-26');
INSERT INTO `cmc_safe` VALUES ('1648881410899705858', '1648881410899705858', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的危险（有害）因素有：森林火险、高处坠落、物体打击、消防安全、触电、摔伤、跌倒等风险。\n（三）针对隐患源制定的安全措施： \n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度、测绘作业安全操作规程，结合测区实际情况开展班前安全活动；\n（2）路边作业穿戴好反光背心等劳动防护用品，项目驾驶员养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全；\n（3） 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度；\n （4） 临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素；\n（6）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业；\n（7）项目如果涉及相关方作业，相关单位需具备此项目测绘作业资格，作业前需签订安全管理协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（8）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（9）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车；\n（10）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（11）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（12）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（13）界桩制作、搬运、安装过程中做好安全防护措施，严防人员摔伤、砸伤事故发生。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '界桩制作、搬运、安装过程中做好安全防护措施，严防人员摔伤、砸伤事故发生', NULL, '2023-03-04', '2024-03-26');
INSERT INTO `cmc_safe` VALUES ('1648881410912288769', '1648881410912288769', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：边坡落石、无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）请加强项目道路交通管理，作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（10）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '外业工作中严防滑到、摔伤，务实开展班组安全活动并留下记录', NULL, '2023-02-24', '2023-08-15');
INSERT INTO `cmc_safe` VALUES ('1648881410929065985', '1648881410929065985', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主责的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：道路交通、无人机飞行风险、交通安全、消防安全、森林防火、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（4）禁止食用霉烂、变质和被污染过的食物以及野菜、野果、野生菌菇等野生植物。禁止酗酒和暴饮暴食。不接触和不食用死、病畜肉。禁止饮用异味、异色和被污染的地表水和井水；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（8）在人、车流量大的道路作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌(墩)，并安排专人担任安全警戒员。迁站时要撤除安全警示标志牌(墩)，肩扛器材时应纵向，防止发生意外；\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（10）本项目涉及相关方参与作业，作业前签订安全管理协议，做好过程中安全监管并留下记录；\n（11）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（12）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守\n（13）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过；\n（14）本次测绘项目涉及水准作业，在危险路段（城区、弯道路段、狭窄路段）派员现场安全警示，全员穿戴好反光背心。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本次测绘项目涉及水准作业，在危险路段（城区、弯道路段、狭窄路段）派员现场安全警示，全员穿戴好反光背心。', NULL, '2023-02-26', '2023-09-01');
INSERT INTO `cmc_safe` VALUES ('1648881410945843202', '1648881410945843202', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：边坡落石、森林火险、消防安全、高处坠落、触电、动物伤害、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于雅砻江楞古水电站区域，外业测绘中涉及无人机等航飞作业、控制测绘、测区属于高山峡谷、要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务，无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（3）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备。\n（4）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区边坡落石严重须高度重视，所有人员不带火种进入林区，外业作业严禁吸烟，随意丢弃烟头，外业作业督促员工穿防滑鞋，杜绝摔倒事故，结合现场实际开展班组安全管理，并留下记录', NULL, '2023-02-24', '2024-04-07');
INSERT INTO `cmc_safe` VALUES ('1648881410962620417', '1648881410962620417', 145, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：边坡落石、无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）请加强项目道路交通管理，作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（10）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '加强班组安全管理，并留下管理痕迹', NULL, '2023-02-24', '2024-04-07');
INSERT INTO `cmc_safe` VALUES ('1648881410979397634', '1648881410979397634', NULL, 58, '（1）产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目存在的安全隐患：城区交通安全、消防安全、资料安全等。 \n（二）针对隐患源制定的安全措施：\n（1）项目负责人须查验参与作业的相关方是否具备作业资质；\n（2）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（3）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒；\n（4）资料应做好备份，以防丢失，保管好设备防止丢失；\n（5）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。\n（6）本项目涉及和相关方共同开展作业，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（7）进入小区、院落须征得同意后方可开展作业，避免产生矛盾。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '城区作业穿戴好反光背心等劳动防护用品，遵守交通规则，严防交通事故发生。', NULL, '2023-02-26', '2023-10-12');
INSERT INTO `cmc_safe` VALUES ('1648881411000369153', '1648881411000369153', 145, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主责的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：淹溺、森林防火、高原病、交通安全、消防安全、动植物伤害、摔倒、砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于西藏林芝地区，工作前参与人员进行身体健康检查，有高血压（III期以上）或者心、肺、肝等部位器质性病变的员工不得参与此次工作。\n（2）项目须储备必要的防高原病药物，工作中预防蚊虫等叮咬。\n（3）在地形图调绘作业时，涉及城镇、公路边作业，要求所有人员穿戴好反光背心，注意交通安全，避让过往车辆。\n（4）本次项目水下地形测绘不得租用船只开展作业，无人船作业时须对船只安全性能做好检查，临水边作业穿戴好救生衣，无人船电池充电须留人值守。\n（5）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（6）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电。\n（8）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过', NULL, '2023-02-26', '2024-03-29');
INSERT INTO `cmc_safe` VALUES ('1648881411017146369', '1648881411017146369', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：水边作业淹溺、森林火险、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区涉及断面水下地形、无人机飞行等，严格遵守甲方安全管理规定及公司测绘安全操作规程及安全管理制度；\n（2）本次项目位于江油县境内，外业测绘中涉及无人机等航飞作业，控制测绘，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（3）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准。\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动物伤害。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '断面测量涉及水下部分须高度重视现场安全管理，穿戴好劳动防护用品，做好班组安全管理。', NULL, '2023-02-20', '2023-07-07');
INSERT INTO `cmc_safe` VALUES ('1648881411033923585', '1648881411033923585', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：边坡落石、无人机飞行安全风险、森林火险、消防安全、交通安全、边坡坠物（落石）、防盗、防动物伤害等\n（三）针对隐患源制定的安全措施：\n（1）测区位于高原高海拔地区，本次项目涉及无人机飞行、控制测绘、检查点采集等，项目须结合现场实际情况开展班组安全管理，并留下记录；\n（2）工作前做好人员健康筛查，高原地区气候寒冷，昼夜温差大，请适当添减衣物，以防受凉感冒；气候干燥，可适当多饮水；\n（3）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（4）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度、测绘作业安全操作规程及当地政府新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动；\n（6）驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（7）森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（8）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（9）水下地形测量中，所有作业人员须穿戴好符合要求的救生衣，风浪太大时段不能强行作业，水流湍急地段要根据实地具体情况采取相应安全防护措施后方可作业；\n（10）采用无人船作业时，工作前应对船只各部件进行全面检查，操作者须熟悉船只性能、参数及熟练掌握船只操作技能，全员穿戴好符合要求的救生衣，无人船电池充电时须有人值守；\n（11）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（12）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过；\n（13）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为.', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '雅江县春季森林火险形势严峻，须严格遵守相关规定，进入林区严禁吸烟，带火种，涉及两河口水电站区域遵守业主安全挂你规定。', NULL, '2023-02-20', '2023-09-04');
INSERT INTO `cmc_safe` VALUES ('1648881411050700802', '1648881411050700802', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：边坡落石（坠物）、道路交通、无人机飞行风险、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（4）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（5）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（6）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（7）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（8）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（9）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守;\n（10）项目现场负责人结合实际情况，务实开展班组安全管理，并留下相关记录。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目现场负责人结合实际情况，务实开展班组安全管理，并留下相关记录。', NULL, '2023-02-16', '2023-09-01');
INSERT INTO `cmc_safe` VALUES ('1648881411067478017', '1648881411067478017', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的危险（有害）因素有：森林火险、淹溺、高处坠落、物体打击、消防安全、触电、摔伤、跌倒、高原病、动物伤害等风险。\n（三）针对隐患源制定的安全措施：\n（1）严格遵守两河口水电站安全管理制度，按要求编制好项目安全管理、文明施工等措施；\n（2）两河口水电站库区公路建成不久，边坡落石和公路下方弃渣滚石严重，工作中须高度重视，在断面布置时，尽可能考虑规避落石区域和陡峭地形；\n（3）严格遵守甘孜州海事局相关规定，并办理作业许可；\n（4）作业中涉及水电站区域，电器设备、电线较多，工作中不得随意触碰电气设备；\n（5）项目车辆做好日常维护保养，不得病车上路，驾驶员不得疲劳驾驶，分心驾驶，危险路段谨慎通行；\n（6）水上作业和临水边作业须全程穿戴好符合要求的救生衣，选择合理行船速度，水上作业必须有2人以上方可进行，6级以上强风、大雨、雷电天气禁止水上作业；\n（7）工作人员严禁在库内游泳、戏水，严禁在船上和工作时间内饮酒；\n（8）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全\n；\n（9）在作业过程中，保持场地整洁，做好现场文明施工及周围的环境卫生；\n（10）在搬运设备、材料过程中，做好防护，防止脱落砸伤人员，在断面测量作业时工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过，所有人员须穿防滑鞋；\n（11）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚；\n（12）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（13）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程；\n（14）项目如需租用船只开展作业，须签订租船协议，并报备公司综合事务部，租用船只的行驶证、检验合格证须在有效期内，并具备相关营运资格，船只驾驶员及船工须熟悉施测区域水情；\n（15）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（16）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（17）采用无人船作业时，工作前应对船只各部件进行全面检查，操作者须熟悉船只性能、参数及熟练掌握船只操作技能，无人船电池充电时须有人值守；\n（18）岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳；\n（19）工作期间，如遇坝身泄洪或水位异常变化，人员和设备应立即撤离至安全地带。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '两河口水电站库区公路建成不久，边坡落石和公路下方弃渣滚石严重，工作中须高度重视，在断面布置时，尽可能考虑规避落石区域和陡峭地形。在搬运设备、材料过程中，做好防护，防止脱落砸伤人员，在断面测量作业时工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过，所有人员须穿防滑鞋。', NULL, '2023-02-28', '2024-04-17');
INSERT INTO `cmc_safe` VALUES ('1648881411084255234', '1648881411084255234', 66, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：边坡落石（坠物）、道路交通、无人机飞行风险、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（4）禁止食用霉烂、变质和被污染过的食物以及野菜、野果、野生菌菇等野生植物。禁止酗酒和暴饮暴食。不接触和不食用死、病畜肉。禁止饮用异味、异色和被污染的地表水和井水；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（8）在人、车流量大的道路作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌(墩)，并安排专人担任安全警戒员。迁站时要撤除安全警示标志牌(墩)，肩扛器材时应纵向，防止发生意外；\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（10）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（11）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '工作中严防边坡落石，严格遵守瀑电总厂各项安全管理规定，结合现场实际开展班组安全管理，并留下相关记录', NULL, '2023-02-16', '2024-01-02');
INSERT INTO `cmc_safe` VALUES ('1648881411105226753', '1648881411105226753', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）目前正值春运，进出场车流量大，道路交通风险高，请加强项目道路交通管理，作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（10）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2023-02-08', '2023-09-01');
INSERT INTO `cmc_safe` VALUES ('1648881411122003970', '1648881411122003970', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：边坡落石、无人机飞行安全风险、森林火险、消防安全、交通安全、边坡坠物（落石）、防盗、防动物伤害等\n（三）针对隐患源制定的安全措施：\n（1）测区位于高原高海拔地区，进出场路途遥远，本次项目涉及无人机飞行、控制测绘、检查点采集等，项目须结合现场实际情况开展班组安全管理，并留下记录；\n（2）工作前做好人员健康筛查，高原地区气候寒冷，昼夜温差大，请适当添减衣物，以防受凉感冒；气候干燥，可适当多饮水；\n（3）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（4）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度、测绘作业安全操作规程及当地政府新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动；\n（6）驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（7）森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（8）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（9）水下地形测量中，所有作业人员须穿戴好符合要求的救生衣，风浪太大时段不能强行作业，水流湍急地段要根据实地具体情况采取相应安全防护措施后方可作业；\n（10）采用无人船作业时，工作前应对船只各部件进行全面检查，操作者须熟悉船只性能、参数及熟练掌握船只操作技能，全员穿戴好符合要求的救生衣，无人船电池充电时须有人值守；\n（11）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（12）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过；\n（13）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为.', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区位于高原高海拔地区，进出场路途遥远，本次项目涉及无人机飞行、控制测绘、检查点采集等，安全风险较高，项目人员须高度重视安全生产，结合现场实际情况开展班组安全管理，并留下记录', NULL, '2023-02-14', '2024-03-27');
INSERT INTO `cmc_safe` VALUES ('1648881411138781186', '1648881411138781186', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：边坡落石、无人机飞行风险、春季森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目地处高原高海拔地区，涉及无人机航测，像控点测量、检查点采集、地形图调绘等，请项目负责人高度重视生产安全，提高安全意识；\n（2）目前正值春运期间，进出场车流量大，道路交通风险高，请加强项目道路交通管理，作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（7）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾发生；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品；\n（10）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为；\n\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及近4000米高海拔地区，进场前须筛查身体健康情况，藏区春雪多须做好防护措施，无人机飞行等严格遵守安全炒作规程，进出场路途遥远提醒驾驶员不疲劳驾驶', NULL, '2023-02-09', '2023-09-01');
INSERT INTO `cmc_safe` VALUES ('1648881411138781187', '1648881411138781187', 60, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：边坡落石、自然灾害、测区大风、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）测区道路涉及临水临崖临坎路段、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（3）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）本项目地处核心藏区，要求员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（8）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及相关方参与作业，项目负责人做好日常安全监管，签订安全分管协议', NULL, '2023-12-19', '2024-03-22');
INSERT INTO `cmc_safe` VALUES ('1648881411138781188', '1648881411138781188', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：淹溺、动物伤害、边坡落石、自然灾害、测区大风、冬季道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）测区道路涉及临水临崖临坎路段、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（3）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）本项目地处核心藏区，要求员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（8）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（11）作业区域蚂存在蝗、蜱虫、蛇等动物伤害，工作中做好防范措施，项目须储备必要的预防、治疗药品；\n（12）加强项目租用车辆、租用驾驶员安全管理，特别是冰雪道路行驶须高度警惕，谨慎驾驶，结合路况及时安装防滑链；\n（13）本项目涉及水下地形测量，须严格遵守安全操作规程，穿戴好防滑鞋、救生衣等劳动防护用品，施测区域水温较低，严防人员落水事故发生，收、放无人船须选择安全位置;\n（14）野外作业做好人员保暖、防冻；\n（15）开展安全生产自查自纠，定期对人员进行安全教育和安全交底，安全教育和安全交底工作的开展须结合作业环境和工作内容。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2023-12-15', '2024-02-29');
INSERT INTO `cmc_safe` VALUES ('1648881411138781189', '1648881411138781189', 112, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：边坡落石、自然灾害、冬季道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁携带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头；\n（2）检查车辆车况，特别是与安全相关的方向、刹车等部位，随时提醒驾驶员选择合理车速，临坎、临崖、临边及冰雪道路（特别是下坡）等危险路段谨慎驾驶，结合路况及时安装防滑链；\n（3）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（4）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气等不安全心理因素；\n（5）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（6）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（7）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（8）测区午后存在大风等情况，遇5级及以上大风天气停止野外作业。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '外业测绘中注意防范边坡落石，涉及交叉作业区域提前与相关单位做好沟通协调，目前正值岁末年初、数九寒天加强项目日常安全监管，工作中及时制止和纠正不安全行为。', NULL, '2023-12-27', '2024-02-29');
INSERT INTO `cmc_safe` VALUES ('1648881411159752705', '1648881411159752705', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期地质灾害、气象灾害、高原病、森林火险、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区位于甘孜州九龙县，作业中涉及无人机飞行、控制测量、像控点测量和检查点采集等，请项目所有人员进场前做好身体健康筛查，加强安全生产宣传教育，开展好班前安全教育活动，树立安全第一的思想，不断强化安全意识；\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准；\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素；\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行；\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度及测绘作业安全操作规程；\n（10）工作中严防摔伤、砸伤、滑倒，涉及在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施保证安全，对不能保证安全的区域，应绕道而行；\n（11）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定；\n（12）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，做好动物伤害；\n（13）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（14）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施；\n（15）在少数民族地区工作时，应尊重民族风俗和生活习惯，在社会治安差、人烟稀少的地区工作，应事先和当地政府及有关部门联系，取得当地政府和公安机关的支持。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严防春秋季森林火险、测区道路复杂，提醒驾驶员谨慎驾驶，不冒险前行', NULL, '2023-02-08', '2023-08-04');
INSERT INTO `cmc_safe` VALUES ('1648881411184918529', '1648881411184918529', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）目前正值春运，进出场车流量大，道路交通风险高，请加强项目道路交通管理，作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（10）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及和相关方开展作业，须签订安全管理协议，做好过程中安全监管', NULL, '2023-02-08', '2023-02-21');
INSERT INTO `cmc_safe` VALUES ('1648881411201695745', '1648881411201695745', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目地处高原高海拔地区，涉及水下地形测量、无人机航测，像控点测量、检查点采集、地形图调绘等，请项目负责人高度重视生产安全，提高安全意识；\n（2）目前正值春运期间，进出场车流量大，道路交通风险高，请加强项目道路交通管理，作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（7）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品；\n（10）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为；\n（11）本项目水下地形测量只能采用无人船开展作业，无人船操作人员和其他临水边作业人员须全程穿戴好救生衣。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目水下地形测量只能采用无人船开展作业，无人船操作人员和其他临水边作业人员须全程穿戴好救生衣，作业前须将测区视频资料发送至公司专职安全员。', NULL, '2023-02-06', '2024-03-29');
INSERT INTO `cmc_safe` VALUES ('1648881411218472961', '1648881411218472961', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及和相关方开展作业，须查验相关单位是否具备作业资格、安全生产条件等，做好过程中安全监管，签订安全管理协议，本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）项目地处山西境内，路途遥远，目前正值春运期间，进出场车流量大，道路交通风险高，请加强项目道路交通管理，作业区域道路涉及乡村道路，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故；\n（10）工作中穿戴好劳动防护用品，山区测量严防滑到摔伤事故发生。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及和相关方开展作业，须查验相关单位是否具备作业资格、安全生产条件等，做好过程中安全监管，签订安全管理协议', NULL, '2023-02-06', '2023-08-04');
INSERT INTO `cmc_safe` VALUES ('1648881411235250178', '1648881411235250178', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（一）本项目存在的安全隐患：交通安全、森林防火、消防安全、高原病、防狗咬等。 \n（二）针对隐患源制定的安全措施：\n1、乘坐车辆全员系好安全带、服从驾驶员的管理、不得有影像驾驶员安全驾驶的行为，严禁乘坐非法营运车辆；\n2、调查人员必须服从实物指标调查联合工作组统一领导和安排，不得擅离工作岗位。调查人员在调查期间应穿着反光背心、呼救口哨等应急物资，调查人员应尽量保证与外界的通讯联系，因私外出须履行请假手续\n3、调查人员应熟悉、了解工作区域的社会、文化、宗教信仰及生活习俗，应尊重当地的社会习俗和生产生活习惯，禁止可能造成恶劣影响的言行，避免因自身言行或工作原因发生纠纷事件；\n4、在作业区域要掌握雨雪天气、洪水的预报情况，尽量避免或减少在环境恶劣的情况下进行现场作业；加强对雪崩、泥石流等自然灾害易发生地段的进行巡查和观测，并提前告知作业人员注意，一旦出现险情，立即远离并采取有关防护措施；\n5、不采摘、不食用野生菌类食品；向调查人员宣贯不在外食用不明菌类；注意饮食、饮水卫生，不食用过期食品、不喝生水等；调查人员的三餐由后勤组统一安排，尽量少单独前往其他地点用餐；\n6、高原工作期间，不可暴饮暴食，禁止饮酒和吸烟，以免加重消化器官的负担，上高原前将自身生理状态调理正常，不出现感冒等身体不适症状；初到高原应多注意休息，不要剧烈运动，且尽量不要洗头、洗澡等，避免着凉感冒；患有心脏疾病，呼吸系统疾病、高血压等严禁进入高原地区、低气压地区工作；\n7、严格遵守国家、地方政府、行业和单位关于防火的有关规定，在森林防火区内，禁止在林区野外吸烟、用火，正确使用电、暖器设备，不使用的充电插头、插座等必须断开电源\n，不卧床吸烟、随意丢弃烟头；\n8、尽量避免通过攀爬房屋、翻越较高围墙等方式开展调查工作，防止不慎坠落受伤，严禁调查人员前往陡坡、悬崖等危险区域开展调查工作，穿戴防滑鞋等劳动防护用品；\n9、调查区域常见放养的牛、羊、狗等牲畜以及存在蛇等其他野生动物，调查人员在调查过程中应注意躲避，不要好奇接近，预防人身受伤；\n10、向调查人员宣贯，除对调查细则中涉及的项目、标准等进行解释外，其他涉及工程项目规模、方案等保密信息均不能擅自透露他人，要求任何人员不得擅自印制、留存本项目涉及的文件资料，同时本项目涉及的信息内容均不得通过互联网等方式进行传播、宣传，\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目人员多，涉及较多实习生参与作业，请合理工作安排，做好班组安全管理', NULL, '2023-02-09', '2024-05-21');
INSERT INTO `cmc_safe` VALUES ('1648881411252027394', '1648881411252027394', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及和相关方开展作业，须查验相关单位是否具备作业资格、安全生产条件等，做好过程中安全监管，签订安全管理协议，本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）目前正值春运期间，进出场车流量大，道路交通风险高，请加强项目道路交通管理，作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（10）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及和相关方开展作业，须查验相关单位是否具备作业资格、安全生产条件等，做好过程中安全监管，签订安全管理协议', NULL, '2023-02-06', '2024-04-07');
INSERT INTO `cmc_safe` VALUES ('1648881411268804610', '1648881411268804610', 122, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：触电、高原病、交通风险、边坡落石、高处坠落、物体打击、起重伤害、机械伤害、坍塌、触电、动植物伤害、临水边测量溺水、摔倒等安全风险等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目地处甘孜州境内，属于高原高海拔地区，涉及建筑施工区域测量作业，安全风险较高，要求中心所有人员高度重视安全生产工作，严格遵守两河口水电站业主及公司安全管理规定。\n（2）作业中佩戴好安全帽、反光背心、手套等安全防护用品，严防作业区上部滚石、高空坠物等。\n（3）在泄水建筑物出口及附近区域等高度危险区作业，作业前应与调度部门协调作业时间，作业中应保持高度警惕，防止意外泄洪事件发生。\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与施工人员或管理人员取得联系，不冒险作业。\n（5）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（6）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（7）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（8）森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（9）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出车前检查防滑链等应急设备是否齐全。\n（10）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）施工区域电器设备、设施较多，工作中不得冒险触碰。\n（13）测量中心工作时间长，人员合理休假安排，做好员工心理疏导。\n（14）进一步完善中心安全风险分级管控和隐患排查治理，根据中心实际情况开展好安全教育培训、安全知识宣传，落实全员安全责任制。\n（15）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，务必引起重视，做到人离断电。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '工作中严防边坡落石发生，特别是雨季两河口库区请高度重视，冬季作业区涉及冰雪道路，项目面包车防滑性能差，请提醒驾驶员谨慎驾驶。', NULL, '2023-02-13', '2024-02-02');
INSERT INTO `cmc_safe` VALUES ('1648881411281387521', '1648881411281387521', 120, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的安全隐患：高原病、交通风险、边坡落石、高处坠落、物体打击、起重伤害、机械伤害、坍塌、触电、动植物伤害、临水边测量溺水、摔倒等安全风险。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守业主单位安全管理规定，现场作业时，必须遵守有关安全、技术操作规程，注意人身和仪器的安全，禁止冒险作业；\n（2）作业中佩戴好安全帽、反光背心、手套、安全带、安全绳等安全设备和增加防护措施，注意作业区上部滚石、高空坠物等；\n（3）在泄水建筑物出口及附近区域等高度危险区作业，作业前应与调度部门协调作业时间，作业中应保持高度警惕，防止意外泄洪事件发生；\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与施工人员或管理人员取得联系，作业应佩戴必要的安全防护用品和通讯设施，作业时注意洞顶物件坠落、坍塌、渗（漏）水等情况。若发现重金属、有害气体等危险物质，应立即停止作业，撤出洞内，并及时报告；\n（5）严禁打猎、捕鱼、下河游泳，严禁食用野菜、野果、蘑菇等；\n（6）严禁在悬崖边、陡坡处以及松动危岩下行走、休息或商量工作。在陡坡上进行测量作业时，避开上下交叉作业，防止滚石打伤作业人员；\n（7）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，务必引起重视，做到人离断电；\n（8）搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生；\n（9）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品；\n（10）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（11）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头；\n（12）不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。在工地期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（13）项目人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（14）加强车辆维护保养及车内电器线路安全检查，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生，加强驾驶员安全意识教育培训。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '加强项目临聘驾驶员的管理，严格遵守双江口水电站开发公司安全管理制度，在日常班组安全管理中尽可能做到细化，对于公司安全管理制度须严格落实', NULL, '2023-02-04', '2024-01-11');
INSERT INTO `cmc_safe` VALUES ('1648881411298164738', '1648881411298164738', 120, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的安全隐患：高原病、交通风险、边坡落石、高处坠落、物体打击、起重伤害、机械伤害、坍塌、触电、动植物伤害、临水边测量溺水、摔倒等安全风险。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守脚木足河巴拉水电站安全管理规定，现场作业时，必须遵守有关安全、技术操作规程，注意人身和仪器的安全，禁止冒险作业；\n（2）作业中佩戴好安全帽、反光背心、手套、安全带、安全绳等安全设备和增加防护措施，注意作业区上部滚石、高空坠物等；\n（3）在泄水建筑物出口及附近区域等高度危险区作业，作业前应与调度部门协调作业时间，作业中应保持高度警惕，防止意外泄洪事件发生；\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与施工人员或管理人员取得联系，作业应佩戴必要的安全防护用品和通讯设施，作业时注意洞顶物件坠落、坍塌、渗（漏）水等情况。若发现重金属、有害气体等危险物质，应立即停止作业，撤出洞内，并及时报告；\n（5）严禁打猎、捕鱼、下河游泳，严禁食用野菜、野果、蘑菇等；\n（6）严禁在悬崖边、陡坡处以及松动危岩下行走、休息或商量工作。在陡坡上进行测量作业时，避开上下交叉作业，防止滚石打伤作业人员；\n（7）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，务必引起重视，做到人离断电；\n（8）搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生；\n（9）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品；\n（10）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头；\n（11）不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。在工地期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（12）项目人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（13）加强车辆维护保养及车内电器线路安全检查，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生，加强驾驶员安全意识教育培训。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目车辆年限较久，须高度关注其安全状况，如不能满足安全需求请及时报备公司，加强项目临聘驾驶员安全管理，施工现场严防边坡落石坠物事故', NULL, '2023-02-04', '2024-01-29');
INSERT INTO `cmc_safe` VALUES ('1648881411319136258', '1648881411319136258', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。 \n（二）本项目存在的危险源及安全风险：森林防火、消防安全、高处坠落、边坡落石、交通安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）项目地处攀枝花市境内，作业中涉及水准测量、监测点控制点测量等，项目员工须高度重视安全生产工作，提升全员安全意识、落实全员安全责任制。\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和二滩电厂有关安全管理规定及公司有关安全生产规章制度。\n（3）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为.\n（4）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故.\n（5）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件.\n（6）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生.\n（7）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（8）野外作业要注意毒蛇、毒蜂等危害动物，携带必要的防护用品和药品.\n（9）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全\n（10）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（11） 岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳。水上作业应穿救生衣，及时观察水域附近情况。\n（12）工作现场禁止吸烟，野外作业禁止携带火种。\n（13）项目时间较长，合理安排员工休假，关注员工心理状态。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2023-02-13', '2024-01-23');
INSERT INTO `cmc_safe` VALUES ('1648881411331719170', '1648881411331719170', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。 \n（二）本项目存在的危险源及安全风险：森林防火、消防安全、高处坠落、边坡落石、交通安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）项目地处攀枝花市境内，作业中涉及水准测量、监测点控制点测量等，项目员工须高度重视安全生产工作，提升全员安全意识、落实全员安全责任制。\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和二滩电厂有关安全管理规定及公司有关安全生产规章制度。\n（3）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为.\n（4）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故.\n（5）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件.\n（6）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生.\n（7）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（8）野外作业要注意毒蛇、毒蜂等危害动物，携带必要的防护用品和药品.\n（9）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全\n（10）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（11） 岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳。水上作业应穿救生衣，及时观察水域附近情况。\n（12）工作现场禁止吸烟，野外作业禁止携带火种。\n（13）项目时间较长，合理安排员工休假，关注员工心理状态。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目临时用工较多，工作中须加强安全监管；严格遵守二滩水电站安全管理规定。', NULL, '2023-02-13', '2024-01-23');
INSERT INTO `cmc_safe` VALUES ('1648881411348496386', '1648881411348496386', 121, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的安全隐患：高原病、交通风险、边坡落石、高处坠落、物体打击、起重伤害、机械伤害、坍塌、触电、动植物伤害、临水边测量溺水、摔倒等安全风险。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守业主单位安全管理规定，现场作业时，必须遵守有关安全、技术操作规程，注意人身和仪器的安全，禁止冒险作业；\n（2）作业中佩戴好安全帽、反光背心、手套、安全带、安全绳等安全设备和增加防护措施，注意作业区上部滚石、高空坠物等；\n（3）在泄水建筑物出口及附近区域等高度危险区作业，作业前应与调度部门协调作业时间，作业中应保持高度警惕，防止意外泄洪事件发生；\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与施工人员或管理人员取得联系，作业应佩戴必要的安全防护用品和通讯设施，作业时注意洞顶物件坠落、坍塌、渗（漏）水等情况。若发现重金属、有害气体等危险物质，应立即停止作业，撤出洞内，并及时报告；\n（5）严禁打猎、捕鱼、下河游泳，严禁食用野菜、野果、蘑菇等；\n（6）严禁在悬崖边、陡坡处以及松动危岩下行走、休息或商量工作。在陡坡上进行测量作业时，避开上下交叉作业，防止滚石打伤作业人员；\n（7）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，务必引起重视，做到人离断电；\n（8）搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生；\n（9）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品；\n（10）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（11）项目如需租用车辆，须签订租车协议，明确各自安全职责，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关；\n（14）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头；\n（15）不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。在工地期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（16）项目人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（17）加强车辆维护保养及车内电器线路安全检查，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生，加强驾驶员安全意识教育培训。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严格遵守绰斯甲水电站业主安全管理规定，项目存在临聘驾驶员、租住办公室，涉及建筑施工区域开展测绘作业，安全风险高，项目人员须高度重视安全预控工作。', NULL, '2023-02-04', '2023-10-21');
INSERT INTO `cmc_safe` VALUES ('1648881411373662209', '1648881411373662209', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：水下地形测绘溺水、道路交通事故、作业中摔伤砸伤、森林防火、触电、高空坠物、边坡落石、消防安全等。 \n（三）针对隐患源制定的安全措施：\n（1）雅砻江桐子林水电站水库泥沙断面测量项目地处攀枝花盐边县，外业测绘中涉及水下地形测绘、控制测量、断面点恢复等，要求项目负责人及参与人员高度重视安全生产工作，落实全员安全责任制，加强员工安全意识教育，作业前做好安全技能、安全知识培训，作业中做好隐患排查治理，并将相关开展情况及时报送至公司专职安全管理员。严格遵守桐子林水电站电厂安全管理规定。\n（2）外业测绘中由于环境条件艰苦，对员工身体健康情况要求较高，作业前项目负责人须筛查参与人员身体健康状况，并查看相关的体检报告，有严重的心脏、肾部、肺部、肝部、高血压等疾病不得参与本次作业。\n（3）各测量小组至少保证两人同行，禁止单独行动，相互保持通讯畅通。\n（4）目前还处于新冠肺炎疫情防控期，严格遵守属地政府和相关单位疫情防控规定，工作中做好个人防护，维护自身身体健康。\n（5）沿交通干线、城镇区域作业时穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底、开展安全培训，工作中经常性安全提醒，确保项目所有人员人身安全。\n (7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。出差（出工）期间驾驶员严禁饮酒。\n（9）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通\n（10）加强森林防火教育培训，遵守属地政府和相关单位森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾。测绘设备部违规充电，大功率电池充电时须有人值守。\n（13）水上作业时，作业人员应穿戴好符合要求的救生衣，船工必须持证上岗，并购买意外伤害保险，如需租用船只开展作业，船只具备相关运营资质，并签订租船协议，船上应配置足够的救生器材。夜间不准使用船只，不能随意搭乘他人。工作人员严禁在库内游泳、戏水、钓鱼，严禁酒后作业。\n（14）岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳。水上作业应穿救生衣，及时观察水域附近情况。\n（15）工作时禁止触碰与工作无关的电气设备。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '桐子林坝前1、2、3号断面测量须重点关注，租用船只先签订租船协议，查验船只是否符合相关安全技术要求，安宁河段测量当地矿山车辆较多，高度重视占道停车安全', NULL, '2023-02-08', '2024-04-07');
INSERT INTO `cmc_safe` VALUES ('1648881411419799553', '1648881411419799553', 121, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的安全隐患：高原病、交通风险、边坡落石、高处坠落、物体打击、起重伤害、机械伤害、坍塌、触电、动植物伤害、临水边测量溺水、摔倒等安全风险。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守金川水电站开发公司安全管理规定，现场作业时，必须遵守有关安全、技术操作规程，注意人身和仪器的安全，禁止冒险作业；\n（2）作业中佩戴好安全帽、反光背心、手套、安全带、安全绳等安全设备和增加防护措施，注意作业区上部滚石、高空坠物等；\n（3）在泄水建筑物出口及附近区域等高度危险区作业，作业前应与调度部门协调作业时间，作业中应保持高度警惕，防止意外泄洪事件发生；\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与施工人员或管理人员取得联系，作业应佩戴必要的安全防护用品和通讯设施，作业时注意洞顶物件坠落、坍塌、渗（漏）水等情况。若发现重金属、有害气体等危险物质，应立即停止作业，撤出洞内，并及时报告；\n（5）严禁打猎、捕鱼、下河游泳，严禁食用野菜、野果、蘑菇等；\n（6）严禁在悬崖边、陡坡处以及松动危岩下行走、休息或商量工作。在陡坡上进行测量作业时，避开上下交叉作业，防止滚石打伤作业人员；\n（7）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，务必引起重视，做到人离断电；\n（8）搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生；\n（9）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品；\n（10）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头；\n（11）不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。在工地期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（12）项目人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（13）加强车辆维护保养及车内电器线路安全检查，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生，加强驾驶员安全意识教育培训。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '金川水电站目前处于建设高峰期，测量中心作业涉及建筑施工区域，安全风险高，中心须做好班组安全管理，日常安全管理中尽可能细化，落实到位，杜绝安全工作层层衰减现场', NULL, '2023-02-04', '2023-09-21');
INSERT INTO `cmc_safe` VALUES ('1648881411457548290', '1648881411457548290', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）目前正值春运期间，进出场车流量大，道路交通风险高，请加强项目道路交通管理，作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（10）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '目前正值春运期间，道路交通风险高，请提醒驾驶员遵章守纪，关注节后综合征，防止注意力不集中、情绪不稳定等不安全心理因素，无人机飞行须严格遵守安全操作规程。', NULL, '2023-02-01', '2024-04-07');
INSERT INTO `cmc_safe` VALUES ('1648881411499491329', '1648881411499491329', 116, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：边坡落石（坠物）、道路交通、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》《岩土勘察作业安全操作规程》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）本项目涉及和相关单位共同开展作业，相关单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作\n（3）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（4）岩土勘察作业前，应对危险源进行辨识和评价，编写勘察纲要时，应根据不同危险等级制定相应的安全生产防护措施；\n（5）岩土勘察作业点不宜布置在高压输电线路下方，当勘察作业点布置在地上架空线、地下管线、设施以及构筑物的安全保护范围内时，安全生产防护措施应符合地上架空线、地下管线设施及构筑物所有者的有关管理规定；\n（6）作业场地四周应设置安全警示标志、围挡、隔离带或防撞设施等，夜间应设置安全警示灯，作业人员应穿反光背心；\n（7）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（8）禁止食用霉烂、变质和被污染过的食物以及野菜、野果、野生菌菇等野生植物。禁止酗酒和暴饮暴食。不接触和不食用死、病畜肉。禁止饮用异味、异色和被污染的地表水和井水；\n（9）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（10）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（11）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（12）在人、车流量大的道路作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌(墩)，并安排专人担任安全警戒员。迁站时要撤除安全警示标志牌(墩)，肩扛器材时应纵向，防止发生意外；\n（13）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（14）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测；\n（15）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（16）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（17）如需与相关方共同开展作业时，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及相关方参与作业，查验作业资格，加强过程中安全监管。', NULL, '2023-01-31', '2024-06-13');
INSERT INTO `cmc_safe` VALUES ('1648881411499491330', '1648881411499491330', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：边坡落石、自然灾害、测区大风、道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）测区道路涉及临水临崖临坎路段、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（3）库区道路新修建不久，边坡落石情况时有发生，危险路段观察通行，\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）做好山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（7）雅江午后易出现大风天气，作业中须做好预防措施；\n（8）项目临时驻地须加强消防安全管理，人离开关闭所有电源;\n（9）天气寒冷，野外作业做好防寒保暖。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '库区道路新修建不久，边坡落石情况时有发生，危险路段观察通行，午后大风较多，超过5级大风停止野外作业，天气寒冷注意防寒保暖。', NULL, '2023-12-14', '2024-03-27');
INSERT INTO `cmc_safe` VALUES ('1648881411499491331', '1648881411499491331', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：高原病、动物伤害、边坡落石、自然灾害、冬季道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）时下正值森林（草原）防火严管期，所有外业生产人员严格遵守属地政府森林（草原）防火管理规定，现场负责人须严格管理，所有人员（包括现场临聘人员）不得带火种进入林区，不得在林区吸烟，发现违规者，公司将严肃处理；\n（2）野外驾驶中涉及临边、临坎、临崖、临江（河）及冰雪道路等危险路段时须谨慎驾驶，切记冒险通过，结合路况及时安装防滑链；\n（3）在调绘工作中，人员比较分散，测区个别地方无手机信号，须携带对讲机，大家随时保持联系；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）本项目地处核心藏区，要求员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（8）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（11）无人机航飞作业须严格遵守公司测绘作业安全操作规程，飞行前做好相关飞行许可报备，航线设计符合相关规定，无人机操控人员应具备航空管理部门或机构认可的安全操作资格，飞机通电时，应确保人员远离螺旋桨，以防螺旋桨转动伤人，无人机电池使用前应对电池进行检查，避免电池因使用不当造成事故；\n（12）冬季来临，气温逐渐下降，进入呼吸道感染、支原体肺炎的高发季节，工作、生活中做好防范措施，讲究个人卫生，必要时佩戴口罩，勤通风，减少食用生、冷食物，如遇发烧、乏力、头痛等症状规范就医。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '野外驾驶中涉及临边、临坎、临崖、临江（河）及冰雪道路等危险路段时须谨慎驾驶，切记冒险通过，结合路况及时安装防滑链；各项作业严格遵守安全操作规程。', NULL, '2023-12-11', '2024-01-17');
INSERT INTO `cmc_safe` VALUES ('1648881411499491332', '1648881411499491332', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：高原病、动物伤害、边坡落石、自然灾害、冬季道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）检查车辆车况，特别是与安全相关的方向、刹车等，随时提醒租用驾驶员选择合理车速，临坎、临崖、临边及冰雪道路（特别是下坡）等危险路段谨慎驾驶，结合路况及时安装防滑链；\n（3）在调绘工作中，人员比较分散，测区个别地方无手机信号，须携带对讲机，大家随时保持联系；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）本项目地处核心藏区，要求员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（8）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（11）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '冬季高海拔地区野外作业安全风险相对较高，项目须落实道路交通、无人机飞行等安全管控措施', NULL, '2023-12-08', '2024-03-26');
INSERT INTO `cmc_safe` VALUES ('1648881411499491333', '1648881411499491333', 60, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：高原病、动物伤害、边坡落石、自然灾害、冬季道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）检查租用车辆车况，特别是与安全相关的方向、刹车等，随时提醒租用驾驶员选择合理车速，临坎、临崖、临边及冰雪道路（特别是下坡）等危险路段谨慎驾驶，结合路况及时安装防滑链；\n（3）在调绘工作中，人员比较分散，测区个别地方无手机信号，须携带对讲机，大家随时保持联系；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）本项目地处核心藏区，要求员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（8）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '在调绘工作中，人员比较分散，测区个别地方无手机信号，须携带对讲机，大家随时保持联系；检查项目租用车辆车况，危险路段（临坎、临边、临崖、冰雪道路等）提醒租用驾驶员谨慎驾驶,所有人员进入林区不得携带火种、香烟，严禁在林区吸烟。', NULL, '2023-12-05', '2024-04-12');
INSERT INTO `cmc_safe` VALUES ('1648881411499491334', '1648881411499491334', 60, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：高原病、动物伤害、边坡落石、自然灾害、冬季道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）检查租用车辆车况，特别是与安全相关的方向、刹车等，随时提醒租用驾驶员选择合理车速，临坎、临崖、临边及冰雪道路（特别是下坡）等危险路段谨慎驾驶，结合路况及时安装防滑链；\n（3）在调绘工作中，人员比较分散，测区个别地方无手机信号，须携带对讲机，大家随时保持联系；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）本项目地处核心藏区，要求员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（8）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '在调绘工作中，人员比较分散，测区个别地方无手机信号，须携带对讲机，大家随时保持联系；检查项目租用车辆车况，危险路段（临坎、临边、临崖、冰雪道路等）提醒租用驾驶员谨慎驾驶,所有人员进入林区不得携带火种、香烟，严禁在林区吸烟。', NULL, '2023-12-04', '2024-04-16');
INSERT INTO `cmc_safe` VALUES ('1648881411499491335', '1648881411499491335', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：动物伤害、边坡落石、自然灾害、测区大风、冬季道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）测区道路涉及临水临崖临坎路段、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（3）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）本项目地处核心藏区，要求员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（8）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（11）作业区域蚂存在蝗、蜱虫、蛇等动物伤害，工作中做好防范措施，项目须储备必要的预防、治疗药品；\n（12）项目工作量大，须加强项目租用车辆、租用驾驶员安全管理，特别是冰雪道路行驶须高度警惕，谨慎驾驶，结合路况及时安装防滑链。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '加强项目驾驶员、车辆管理，特别是租用车辆和临聘驾驶员管理，冰雪道路、临坎临崖等危险路段须提醒驾驶员谨慎驾驶，无人机飞行严格遵守安全操作规程，严格遵守属地政府森林防火规定，所有人员进入林区不携带火种、香烟', NULL, '2023-12-03', '2024-03-05');
INSERT INTO `cmc_safe` VALUES ('1648881411499491336', '1648881411499491336', 60, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：边坡落石、自然灾害、测区大风、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）测区道路涉及临水临崖临坎路段、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（3）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理，严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，人员离开关闭电源；\n（7）本项目地处核心藏区，要求员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（8）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '冬季高海拔地区外业作业涉及冰雪道路较多，请提醒驾驶员谨慎驾驶。', NULL, '2023-11-27', '2024-05-09');
INSERT INTO `cmc_safe` VALUES ('1648881411499491337', '1648881411499491337', 46, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在主要安全风险：消防安全、交通安全等。 \n（三）针对安全风险制定安全管控措施：\n（1）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电增多，火灾风险大，所有人员离开办公室关闭电源；\n（2）资料应做好备份，以防丢失；保管好设备防止丢失；\n（3）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定；\n（4）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外；\n（5）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2023-11-17', '2024-01-23');
INSERT INTO `cmc_safe` VALUES ('1648881411499491338', '1648881411499491338', 109, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的危险（有害）因素有：森林火险、淹溺、高处坠落、物体打击、消防安全、触电、摔伤、跌倒、高原病、动物伤害等风险。\n（三）针对隐患源制定的安全措施：\n（1）严格遵守业主及属地政府安全管理制度，按要求编制好项目安全管理、文明施工等措施；\n（2）项目车辆做好日常维护保养，不得病车上路，驾驶员不得疲劳驾驶，分心驾驶，危险路段谨慎通行；\n（3）水上作业和临水边作业须全程穿戴好符合要求的救生衣，选择合理行船速度，水上作业必须有2人以上方可进行，5级以上强风、大雨、雷电等极端天气禁止水上作业；\n（4）本项目地处核心藏区，要求员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外；\n（5）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（6）本项目涉及相关单位参与作业，相关单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（7）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（8）在作业过程中，保持场地整洁，做好现场文明施工及周围的环境卫生；\n（9）在搬运设备、材料过程中，做好防护，防止脱落砸伤人员，在测量作业时工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过，所有人员须穿防滑鞋；\n（10）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚；\n（11）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（12）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程；\n（13）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（14）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（15）采用无人船作业时，工作前应对船只各部件进行全面检查，操作者须熟悉船只性能、参数及熟练掌握船只操作技能，无人船电池充电时须有人值守；\n（16）岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及和相关方参与作业，作业前做好安全交底和针对性安全教育培训，水下地形测绘前须将施测区域影像资料（照片或者视频）发送至专职安全员，工作中严格遵守安全操作规程', NULL, '2023-11-13', '2023-12-14');
INSERT INTO `cmc_safe` VALUES ('1648881411499491339', '1648881411499491339', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：边坡落石、自然灾害、测区大风、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）测区道路涉及临水临崖临坎路段、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（3）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）雅江至测区路段边坡落石情况时有发生，通过危险路段请观察通行；\n（6）做好山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（8）雅江午后易出现大风天气，作业中须做好预防措施；\n（9）项目临时驻地须加强消防安全管理，人离开关闭所有电源。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '雅江至测区路段边坡落石情况时有发生，通过危险路段请观察通行，冬季来临测区冰雪道路多，请提醒驾驶员谨慎驾驶，严格遵守雅江县森林防火规定，所有人员野外作业严禁吸烟，携带火种。', NULL, '2023-11-13', '2024-03-26');
INSERT INTO `cmc_safe` VALUES ('1648881411499491340', '1648881411499491340', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：冬季冰雪道路、森林防火、边坡落石、高原病、高海拔地区大风危害、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目作业区域海拔较高，出发前购置预防高原反应和应急药品，对参与人员身体进行健康筛查，不宜进入高原的人员禁止参与作业；\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）要求项目驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，危险路段，观察通行，切记盲目冒进；\n（4）进入冬季，野外作业做好保暖防冻，测区冰雪道路较多，提醒驾驶员谨慎驾驶，结合现场路况及时安装防滑链；\n（5）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（6）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（7）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（8）测区部分区域无手机信号，须佩戴对讲机等通讯设备，作业员随时保持联系，高海拔地区野外作业尽可能保证两人同行；\n（9）测区午后易出现大风天气，作业中须做好预防措施；\n（10）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；\n（11）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（12）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（13）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '进入冬季，藏区冰雪道路较多，督促驾驶员结合路况及时安装防滑链，危险路段谨慎驾驶，测区部分区域无手机信号，须佩戴对讲机等通讯设备，作业员随时保持联系，高海拔地区野外作业尽可能保证两人同行。', NULL, '2023-11-07', '2024-01-02');
INSERT INTO `cmc_safe` VALUES ('1648881411499491341', '1648881411499491341', 60, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：高处坠落、自然灾害、道路交通、消防安全、无人机飞行安全、物体打击、森林防火、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）项目所有人员须高度重视安全风险预控，提升安全意识，不违章作业、违章指挥、违反劳动纪律；\n（2）严格遵守属地政府森林防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）测区道路涉及临水临崖临坎路段、泥泞路面、简易公路，陡坡弯道路段，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，危险路段，观察通行，切记盲目冒进；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）高边坡，临水边、沟边测绘时做好防范措施，严防人员防滑和防摔倒；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）做好边坡落石、野外作业大风、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（9）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；\n（10）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（11）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素,从业人员思想情绪异常波动期间不得参加作业，精神疲惫的情况下不得参加作业，酒后、宿醉状态下不得参加作业；\n（12）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》、《无人驾驶航空器飞行管理暂行条例》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程;\n（13）外业测绘时严防蛇、毒蜂、蚂蟥等动物伤害，工作前须储备必要的预防、治疗药品；\n（14）进入单位、居民宅院进行测绘时，应先出示相关证件，说明情况得到允许后再作业；\n（15）无人机电池充电时，须有人值守，使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '无人机飞行严格遵守安全操作规程，飞行前到属地派出所进行飞行报备，野外作业严防人员滑到摔伤事故发生', NULL, '2023-11-06', '2024-03-29');
INSERT INTO `cmc_safe` VALUES ('1648881411499491342', '1648881411499491342', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：森林防火、高处坠落、自然灾害、测区大风危害、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）项目所有人员须高度重视安全风险预控，提升安全意识，不违章作业、违章指挥、违反劳动纪律；\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）测区道路涉及临水临崖临坎路段、泥泞路面、简易公路，陡坡弯道路段，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，危险路段，观察通行，切记盲目冒进；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）高边坡、沟边测绘时做好防范措施，严防人员防滑和防摔倒；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）做好边坡落石、野外作业大风、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（9）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；\n（10）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（11）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（12）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》、《无人驾驶航空器飞行管理暂行条例》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '凉山州秋冬季节午后风大，野外作业须高度关注，6级以上大风停止外业工作，无人机航测作业严格遵守安全操作规程，凉山州秋冬季节也是森林防火严管期，项目所有人员禁带火种进入林区，不得在林区吸烟，严格遵守属地政府森林防火规定。', NULL, '2023-11-03', '2024-05-07');
INSERT INTO `cmc_safe` VALUES ('1648881411499491343', '1648881411499491343', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：自然灾害、边坡落石（坠物）、道路交通（冰雪道路）、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《四川省安全生产条例》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；;\n（3）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（4）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（5）项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（6）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（7）做好临时驻地消防安全，做到人离开关闭所有电源；\n（8）野外行走注意观察周边环境，不冒险前行；\n（9）时下正值秋冬季节，藏区冰雪道路增多，提醒驾驶员谨慎驾驶，通往测区道路复杂，涉及临坎、临崖、临江边较多，须重点关注；\n（10）测区午后大风较多，无人机飞行须严格遵守操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目测区路况较差，可能存在不能通行等情况，请提醒周建伟一定注意交通安全，不具备通行条件，保证不了作业安全请停止作业，一定不能冒进！当下藏区冰雪道路、暗冰路段也不少，请高度重视，该挂防滑链及时安装，野外作业天气寒冷请兄弟伙些做好保暖防冻，工作中穿防滑鞋，预防防滑倒摔伤', NULL, '2023-11-03', '2024-06-14');
INSERT INTO `cmc_safe` VALUES ('1648881411499491346', '1648881411499491346', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）车辆排放符合国家标准，不会对周围环境产生污染；\n（3）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（4）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：森林防火、边坡落石、高原病、高海拔地区大风危害、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目作业区域海拔较高，出发前购置预防高原反应和应急药品，对参与人员身体进行健康筛查，不宜进入高原的人员禁止参与作业；\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）要求项目驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，危险路段，观察通行，切记盲目冒进；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（6）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（7）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（8）测区部分区域无手机信号，须佩戴对讲机等通讯设备，作业员随时保持联系，高海拔地区野外作业尽可能保证两人同行；\n（9）测区午后易出现大风天气，作业中须做好预防措施；\n（10）高海拔地区气温变化大，极端天气多，带足御寒衣物；\n（11）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；\n（12）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（13）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（14）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（15）项目负责人结合测区实际情况，加强安全管理，不盲目蛮干。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '秋冬季节，野外高海拔地区作业涉及冰雪道路较多，提醒驾驶员谨慎驾驶，无人机航飞作业遵守相关的安全操作规程，工作发现员工不安全行为须及时制止', NULL, '2023-10-22', '2024-03-25');
INSERT INTO `cmc_safe` VALUES ('1648881411499491347', '1648881411499491347', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）车辆排放符合国家标准，不会对周围环境产生污染；\n（3）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（4）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：森林防火、高处坠落、自然灾害、测区大风危害、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）项目所有人员须高度重视安全风险预控，提升安全意识，不违章作业、违章指挥、违反劳动纪律；\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）测区道路涉及临水临崖临坎路段、泥泞路面、简易公路，陡坡弯道路段，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，危险路段，观察通行，切记盲目冒进；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）高边坡，临水边、沟边测绘时做好防范措施，严防人员防滑和防摔倒；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）做好边坡落石、野外作业大风、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（9）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；\n（10）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（11）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（13）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》、《无人驾驶航空器飞行管理暂行条例》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '外业现场实际负责人周强长时间未参与野外作业，项目负责人须重点督促，不盲目冒进，蛮干，提升项目人员安全意识。', NULL, '2023-10-12', '2024-04-19');
INSERT INTO `cmc_safe` VALUES ('1648881411499491348', '1648881411499491348', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：森林防火、边坡落石、高原病、高海拔地区大风危害、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目作业区域海拔较高（场地海拔介于3900m~4250m），出发前购置预防高原反应和应急药品，对参与人员身体进行健康筛查，不宜进入高原的人员禁止参与作业；\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）项目实施正值中秋国庆假期，进出场车流量较大，要求项目驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，危险路段，观察通行，切记盲目冒进；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（6）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（7）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（8）测区部分区域无手机信号，须佩戴对讲机等通讯设备，作业员随时保持联系，高海拔地区野外作业尽可能保证两人同行；\n（9）测区午后易出现大风天气，作业中须做好预防措施；\n（10）高海拔地区气温变化大，极端天气多，带足御寒衣物；\n（11）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；\n（12）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（13）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（14）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（15）项目负责人结合测区实际情况，加强安全管理，不盲目蛮干。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目作业区域海拔较高（场地海拔介于3900m~4250m），出发前购置预防高原反应和应急药品，对参与人员身体进行健康筛查，不宜进入高原的人员禁止参与作业，加强日常森林防火管理。', NULL, '2023-10-07', '2024-04-18');
INSERT INTO `cmc_safe` VALUES ('1648881411499491349', '1648881411499491349', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：高处坠落、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）测区道路部分涉及临水临崖临坎路段、泥泞路面、简易公路，陡坡弯道路段，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，危险路段，观察通行，切记盲目冒进；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）高边坡，临水边、沟边测绘时做好防范措施，严防人员防滑和防摔倒；\n（4）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（5）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（6）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（8）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目进出场路途遥远，提醒驾驶员不疲劳驾驶、分心驾驶，无人机飞行由相关方承担，加强相关方安全管理', NULL, '2023-09-27', '2024-03-01');
INSERT INTO `cmc_safe` VALUES ('1648881411499491350', '1648881411499491350', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：森林防火、高处坠落、高原病、自然灾害、高海拔地区大风危害、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目作业区域海拔较高，出发前购置预防高原反应和应急药品，对参与人员身体进行健康筛查，不宜进入高原的人员禁止参与作业；\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）测区道路部分涉及临水临崖临坎路段、泥泞路面、简易公路，陡坡弯道路段，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，危险路段，观察通行，切记盲目冒进；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）高边坡，临水边、沟边测绘时做好防范措施，严防人员防滑和防摔倒；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（9）测区部分区域无手机信号，须佩戴对讲机等通讯设备，作业员随时保持联系，高海拔地区野外作业尽可能保证两人同行；\n（10）测区午后易出现大风天气，作业中须做好预防措施；\n（11）高海拔地区气温变化大，极端天气多，带足御寒衣物；\n（12）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；\n（13）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（14）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（15）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '防范测区边坡落石，严格遵守雅江县政府森林防火管理规定', NULL, '2023-09-27', '2024-03-26');
INSERT INTO `cmc_safe` VALUES ('1648881411499491351', '1648881411499491351', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：水域测量风险、高原病、汛期自然灾害、高海拔地区极端天气、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）测区道路涉及临水临崖临坎路段、泥泞路面、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（3）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（7）无人机航飞：航线设计符合安全要求，飞行前踏勘测区，特别是电线、铁塔等，查看天气（大风、雷电等极端天气暂停作业），起飞前无人机各固件须两人交叉检查，无人机电池充电须留人值守，起飞前对无人机电池全面测试和检查，公司近些年基本每年都有无人机飞行事故发生，需要引起重视；\n（8）高原高海拔地区作业，对人员身体健康情况要求高，做好人员健康筛查外，项目还需储备必要的药品和应急物资，合理安排作业时间.', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2023-09-19', '2024-04-28');
INSERT INTO `cmc_safe` VALUES ('1648881411499491352', '1648881411499491352', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：边坡落石、自然灾害、测区大风、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）测区道路涉及临水临崖临坎路段、汛期泥泞路面、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（3）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）雅江至测区路段边坡落石情况时有发生，通过危险路段请观察通行；\n（6）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（8）雅江午后易出现大风天气，作业中须做好预防措施；\n（9）项目临时驻地须加强消防安全管理，人离开关闭所有电源。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '雅江至测区路段边坡落石时有发生，危险路段观察通行，本项目作业区域临坎、临崖较多，请重点关注', NULL, '2023-09-09', '2024-04-06');
INSERT INTO `cmc_safe` VALUES ('1648881411499491353', '1648881411499491353', 63, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：自然灾害、边坡落石（坠物）、道路交通、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《四川省安全生产条例》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）本项目涉及和相关单位共同开展作业，工作中做好协调够沟通工作，避免产生矛盾;\n（3）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（4）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（5）项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（6）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（7）做好临时驻地消防安全，做到人离开关闭所有电源；\n（8）野外行走注意观察周边环境，不冒险前行。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '进出项目路途遥远，督促驾驶员不疲劳驾驶、分心驾驶，配合测量中做好沟通协调工作。', NULL, '2023-09-09', '2023-09-28');
INSERT INTO `cmc_safe` VALUES ('1648881411499491354', '1648881411499491354', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）车辆排放符合国家标准，不会对周围环境产生污染；\n（3）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（4）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：森林防火、高处坠落、自然灾害、测区大风危害、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目作业区域临攀枝花城区和机场，工期紧，项目所有人员须高度重视安全风险预控，提升安全意识，不违章作业、违章指挥、违反劳动纪律；\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）测区道路部分涉及临水临崖临坎路段、泥泞路面、简易公路，陡坡弯道路段，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，危险路段，观察通行，切记盲目冒进；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）高边坡，临水边、沟边测绘时做好防范措施，严防人员防滑和防摔倒；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）做好因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（9）测区午后易出现大风天气，作业中须做好预防措施；\n（10）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；\n（11）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（12）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（13）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区离攀枝花城区和机场较近，无人机飞行须严格遵守安全操作规程，攀枝花秋冬季干燥，野外作业严禁吸烟，工作中涉及临坎、临边、临崖时做好安全提醒和防护措施。', NULL, '2023-09-09', '2024-01-16');
INSERT INTO `cmc_safe` VALUES ('1648881411499491355', '1648881411499491355', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）车辆排放符合国家标准，不会对周围环境产生污染；\n（3）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（4）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：森林防火、高处坠落、高原病、自然灾害、高海拔地区大风危害、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目作业区域海拔较高，出发前购置预防高原反应和应急药品，对参与人员身体进行健康筛查，不宜进入高原的人员禁止参与作业；\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）测区道路部分涉及临水临崖临坎路段、泥泞路面、简易公路，陡坡弯道路段，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，危险路段，观察通行，切记盲目冒进；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）高边坡，临水边、沟边测绘时做好防范措施，严防人员防滑和防摔倒；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（9）做好因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（10）测区部分区域无手机信号，须佩戴对讲机等通讯设备，作业员随时保持联系，高海拔地区野外作业尽可能保证两人同行；\n（11）测区午后易出现大风天气，作业中须做好预防措施；\n（12）高海拔地区气温变化大，极端天气多，带足御寒衣物；\n（13）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；\n（14）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（15）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（16）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（17）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '临空临边作业时必须采取防滑、防坠措施，确保人员和设备安全，大风、雷电、暴雨等恶劣天气时禁止野外作业', NULL, '2023-08-30', '2024-04-11');
INSERT INTO `cmc_safe` VALUES ('1648881411499491356', '1648881411499491356', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全风险：汛期地质灾害风险、道路交通风险、消防安全、雷雨天气、界桩制作搬运人员摔伤、砸伤等。 \n（三）作业中须注意的安全措施（注意事项）：\n（1）本项目涉及和相关单位配合测量、界桩制作、搬运、安装等，安全风险相对较高，项目人员须高度重视安全工作；\n（2）当前正值秋汛，雨水较多，\n（3）高山峡谷地区野外作业，严防边坡落石，危险路段观察通行；\n（4）（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全风险：汛期地质灾害风险、道路交通风险、夏季野外作业中暑、消防安全、雷雨天气、界桩制作搬运人员摔伤、砸伤等。 \n（三）作业中须注意的安全措施（注意事项）：\n（1）本项目涉及和相关单位配合测量、界桩制作、搬运、安装等，安全风险相对较高，项目人员须高度重视安全工作；\n（2）大风、雷电、暴雨等恶劣天气时禁止作业；\n（3）高山峡谷地区野外作业，严防边坡落石，危险路段观察通行；\n（4）天气炎热，做好中暑等措施，项目购置藿香正气液等防暑药品；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行；\n（7）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（8）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过；\n（11）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（12）生产项目在工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底；\n（13）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，秋冬季时电器火灾高发期，火灾风险大，务必引起重视，做到人离断电。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '界桩制作、搬运、安装中严防砸伤人员、人员滑到摔伤事故发生，加强临时用工的管理，工作前告知安全风险并随时安全提醒。', NULL, '2023-08-29', '2023-09-11');
INSERT INTO `cmc_safe` VALUES ('1648881411499491357', '1648881411499491357', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的安全风险：消防安全、交通安全、办公室安全等。 \n（二）针对安全风险制定安全措施：\n（1）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（2）资料应做好备份，以防丢失；保管好设备防止丢失。\n（3）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（4）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（5）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目无外业，安全风险较低，做好办公室安全管理，人离开关闭电源。', NULL, '2023-08-29', '2023-09-13');
INSERT INTO `cmc_safe` VALUES ('1648881411499491358', '1648881411499491358', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）车辆排放符合国家标准，不会对周围环境产生污染；\n（3）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（4）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：汛期自然灾害、边坡落石（坠物）、道路交通、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《四川省安全生产条例》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）本项目涉及和相关单位共同开展作业，工作中做好协调够沟通工作，避免产生矛盾;\n（3）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（4）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（5）项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（6）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（7）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（8）野外行走注意观察周边环境，不冒险攀登陡坡。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '实物指标配合测量工作中做好沟通协调工作，避免和相关人员产生矛盾，目前在处于秋汛，工作严防边坡落石发生。', NULL, '2023-08-29', '2023-09-12');
INSERT INTO `cmc_safe` VALUES ('1648881411499491359', '1648881411499491359', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：水域测量风险、高原病、汛期自然灾害、高海拔地区极端天气、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）项目工作量大，涉及无人机航飞、水下地形测量、水边线测量、断面测量、控制点测量、检查点采集等，测区高山峡谷、高原高海拔地区、工作中涉及临坎、临崖、临边等安全风险相对较高，项目全体人员从思想上高度重视作业安全，项目开始前开展安全教育培训，明确项目兼职安全员，履行安全监管职责；\n（2）水域测量：每天工作前先踏勘施测区域，辨识出危险源，存在的安全风险，做到心中有数，收放船只和岸边操作时，杜绝人员落水情况发生，金沙江水温较低，水域测量穿戴好救生衣、防滑鞋等防护用品，危险区域不冒险作业\n（3）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（4）测区道路涉及临水临崖临坎路段、汛期泥泞路面、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（5）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（6）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（7）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（8）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（9）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（10）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（11）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（12）金沙江流域午后易出现大风天气，作业中须做好预防措施；\n（13）无人机航飞：航线设计符合安全要求，飞行前踏勘测区，特别是电线、铁塔等，查看天气（大风、雷电等极端天气暂停作业），起飞前无人机各固件须两人交叉检查，无人机电池充电须留人值守，起飞前对无人机电池全面测试和检查，公司近些年基本每年都有无人机飞行事故发生，需要引起重视；\n（14）相关方共同开展作业时，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（15）高原高海拔地区作业，对人员身体健康情况要求高，做好人员健康筛查外，项目还需储备必要的药品和应急物资，合理安排作业时间；\n（16）测区寺庙多，地处核心藏区，尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区寺庙多，地处核心藏区，尊重当地的民族风俗习惯，水域测量做好翻翻措施，严防人员落水事故发生，测区道路条件差，提醒驾驶员谨慎驾驶，明确项目兼职安全员，履行安全监管职责。', NULL, '2023-08-18', '2024-02-28');
INSERT INTO `cmc_safe` VALUES ('1648881411499491360', '1648881411499491360', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：汛期自然灾害、测区大风、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（2）测区道路涉及临水临崖临坎路段、汛期泥泞路面、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（3）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（4）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（5）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（6）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（8）雅江午后易出现大风天气，作业中须做好预防措施；', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '雅江县至米龙乡县道公路边坡雨季落石严重，请项目人员重点关注。', NULL, '2023-08-17', '2024-03-26');
INSERT INTO `cmc_safe` VALUES ('1648881411499491361', '1648881411499491361', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：高原病、汛期自然灾害、高海拔地区大风、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目作业涉及高原高海拔地区，出发前购置预防高原反应和应急药品，对参与人员身体进行健康筛查，作业区域涉及叶巴滩电站，工作中严格遵守业主及施工单位规定，如涉及交叉作业，提前做好沟通协调工作；\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）测区道路涉及临水临崖临坎路段、汛期泥泞路面、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（9）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（10）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（11）金沙江流域午后易出现大风天气，作业中须做好预防措施；\n（12）相关方共同开展作业时，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '作业区域涉及叶巴滩电站工区，严格遵守业主及相关单位安全管理规定，相关方共同开展作业时，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导', NULL, '2023-08-14', '2024-01-19');
INSERT INTO `cmc_safe` VALUES ('1648881411499491362', '1648881411499491362', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：汛期自然灾害、边坡落石（坠物）、道路交通、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《四川省安全生产条例》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）本项目涉及和相关单位共同开展作业，工作中做好协调够沟通工作，避免产生矛盾;\n（3）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（4）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（5）项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（6）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（7）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（8）野外行走注意观察周边环境，不冒险攀登陡坡。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及和相关单位共同开展作业，工作中做好协调够沟通工作，当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业。', NULL, '2023-08-14', '2024-03-26');
INSERT INTO `cmc_safe` VALUES ('1648881411499491363', '1648881411499491363', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：高原病、汛期自然灾害、高海拔地区大风危害、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目作业区域海拔较高，高原病防范非常很重要，出发前购置预防高原反应和应急药品，对参与人员身体进行健康筛查；\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）测区道路部分属于乡村道路、临水临崖临坎路段、汛期泥泞路面、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）高边坡，临水边、沟边测绘时注意防滑和防摔倒；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）当前正值主汛期，进入一年中降雨集中期，雷雨等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（9）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（10）测区部分区域无手机信号，须佩戴对讲机等通讯设备，作业员随时保持联系，高海拔地区野外作业尽可能保证两人同行；\n（11）测区午后易出现大风天气，作业中须做好预防措施；\n（12）高海拔地区气温变化大，极端天气多，带足御寒衣物。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '出发前购置预防高原反应和应急药品，对参与人员身体进行健康筛查，高边坡，临水边、沟边、陡岩测绘时注意防滑和防摔倒。', NULL, '2023-08-09', '2024-01-05');
INSERT INTO `cmc_safe` VALUES ('1648881411499491364', '1648881411499491364', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：高原病、汛期自然灾害、高海拔地区大风危害、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目作业区域海拔超过4000米，高原病防范非常很重要，出发前购置预防高原反应和应急药品，对参与人员身体进行健康筛查；\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）测区道路部分属于乡村道路、临水临崖临坎路段、汛期泥泞路面、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）高边坡，临水边、沟边测绘时注意防滑和防摔倒；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（9）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（10）测区部分区域无手机信号，须佩戴对讲机等通讯设备，作业员随时保持联系，高海拔地区野外作业尽可能保证两人同行；\n（11）理塘午后易出现大风天气，作业中须做好预防措施；\n（12）高海拔地区气温变化大，极端天气多，带足御寒衣物。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目作业区域海拔超过4000米，预防高原病发生非常重要，出发前购置预防高原反应和应急药品，对参与人员身体进行健康筛查，测区部分区域无手机信号，须佩戴对讲机等通讯设备，作业中随时保持联系，高海拔地区野外作业尽可能保证两人同行，高原气温变化大，极端天气多，带足御寒衣物。', NULL, '2023-08-09', '2024-01-19');
INSERT INTO `cmc_safe` VALUES ('1648881411499491365', '1648881411499491365', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：水下地形测量中淹溺、高原病、汛期自然灾害、高海拔地区大风危害、道路交通、消防安全、无人机飞行安全、物体打击、摔伤，滑到，动物伤害等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目作业区域海拔较高，高原病防范非常很重要，出发前购置预防高原反应和应急药品，对参与人员身体进行健康筛查；\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（3）测区道路部分属于乡村道路、临水临崖临坎路段、汛期泥泞路面、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶，公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）高边坡，临水边、沟边测绘时注意防滑和防摔倒；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）当前正值主汛期，进入一年中降雨集中期，雷雨等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（9）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（10）测区部分区域无手机信号，须佩戴对讲机等通讯设备，作业员随时保持联系，高海拔地区野外作业尽可能保证两人同行；\n（11）测区午后易出现大风天气，作业中须做好预防措施；\n（12）高海拔地区气温变化大，极端天气多，带足御寒衣物；\n（13）本项目涉及多处水下地形测量，施测前全面踏勘，辨识危险源，制定管控措施，所有人员穿戴好救生衣。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '水下地形测量前先踏勘，辨识出危险源，制定管控措施，部分测区无通讯讯号，须两人同行，携带对讲机。', NULL, '2023-08-14', '2024-03-27');
INSERT INTO `cmc_safe` VALUES ('1648881411499491366', '1648881411499491366', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：高温中暑、汛期自然灾害、城镇道路交通、消防安全、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）本项目涉及铜街子水电站区域，需严格遵守其安全管理规定，沙湾至作业区道路运矿的大货车较多，提醒驾驶员谨慎驾驶；\n（2）工作中遇陡坡弯急、临水临崖临坎路段、汛期泥泞路面、简易公路等危险路段须先下车查看，不冒险前行，驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求；\n（3）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（4）如采用无人机航测作业，严格遵守安全操作规程，做好飞行前报备，两人交叉对无人机固件进行检查，航线涉及符合安全要求；\n（5）高边坡，临水边、沟边测绘时注意防滑和防摔倒；\n（6）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（7）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（8）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（9）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（10）近期气温较高，合理安排野外作业时间，预防高温中暑事故发生。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及铜街子水电站区域，需严格遵守其安全管理规定，沙湾至作业区道路运矿的大货车较多，提醒驾驶员谨慎驾驶', NULL, '2023-08-02', '2024-03-29');
INSERT INTO `cmc_safe` VALUES ('1648881411499491367', '1648881411499491367', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全风险：汛期自然灾害、高原病、边坡落石（坠物）、道路交通、无人机飞行风险、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对安全风险制定的管控措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）测区道路条件较差，遇陡坡弯急、临水临崖临坎路段、汛期泥泞路面、简易公路等危险路段须先下车查看，不冒险前行，驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求；\n（4）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（8）高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣；\n（9）项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（10）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（11）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（12）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（13）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区道路条件较差，遇陡坡弯急、临水临崖临坎路段、汛期泥泞路面、简易公路等危险路段须先下车查看，不冒险前行，无人机飞行须严格遵守相关安全操作规程', NULL, '2023-07-27', '2024-03-27');
INSERT INTO `cmc_safe` VALUES ('1648881411499491368', '1648881411499491368', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全风险：城镇区域测量道路交通风险、夏季野外作业中暑、消防安全、雷雨天气等。 \n（三）作业中须注意的安全措施（注意事项）：\n（1）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，工作做好合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等；\n（2）高山峡谷地区野外作业，严防边坡落石，危险路段观察通行；\n（3）天气炎热，做好中暑等措施，项目购置藿香正气液等防暑药品；\n（4）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（5）项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行；\n（6）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（7）本项目涉及相关方参与作业，相关单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行辨识，做好作业中隐患排查等工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '加强相关方安全管理，雷雨、大风等极端天气暂停野外作业', NULL, '2023-07-15', '2024-03-27');
INSERT INTO `cmc_safe` VALUES ('1648881411499491369', '1648881411499491369', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '(一）本项目安全目标\n（1）不发生人身轻伤及以上事故；\n（2）不发生设备损坏事故；\n（3）不发生火灾事故；\n（4）不发生交通事故；\n（5）不发生环保事件；\n（6）不发生违法、违纪及与当地居民发生冲突等治安事件。\n（二）本项目存在的安全风险主要有：汛期自然灾害、水下地形测量淹溺、常规测量人员滑到摔伤、道路交通风险等\n（三）项目安全管理安全措施\n（1）项目开展工作前须对测区全面踏勘，辨识主要安全风险，制定安全管控措施；\n（2）结合项目实际情况开展安全教育培训，提高参与人员安全意识；\n（3）时下正值主汛期，须关注施测地域气象、道路、地质灾害等信息，遇到雷雨、大风（5级以上）、暴雨、高温等极端天气暂停外业作业；\n（4）本项目涉及水下地形测量，本次全部采用无人船开展作业，无人船操作人员和临水边工作人员须全员穿戴好符合要求的救生衣；\n（5）在像控点采集、地形点检查、控制点埋设等工作中，严防人员摔伤滑到，全员穿好防护鞋，测量点选取须注意周边环境安全；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（7）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（8）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（9）野外工作中有沟、槽、孔、洞，通过湿滑路面时，注意脚下，防止滑倒、摔倒等事故发生；\n（10）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '老沟水库河滩存在较多淤泥，沿河作业时须高度重视，时下正值汛期，野外作业高度重视自然灾害防范工作，须提前关注测区气象、地灾、山洪等情况，极端天气暂停野外作业', NULL, '2023-07-04', '2023-11-16');
INSERT INTO `cmc_safe` VALUES ('1648881411499491370', '1648881411499491370', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：汛期自然灾害风险、消防安全、交通安全、极端天气危害等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目主要配合相关单位开展测量工作，工作中做好沟通、协调工作；\n（2）溪洛渡夏季气温较高，做好防暑降温工作，合理规划工作时间，避免人员中暑发生；\n（3）野外作业要注意毒蛇、毒蜂等危害动物，携带必要的防护用品和药品；\n（4）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头；\n（5）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路；\n（6）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。发现测区有灾害性天气预警，工作做好合理安排。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（8）夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（9）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '配合测量做好沟通、协调工作，溪洛渡天气炎热，合理安排外业时间，严防人员中暑事故发生', NULL, '2023-07-04', '2024-03-27');
INSERT INTO `cmc_safe` VALUES ('1648881411499491371', '1648881411499491371', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '(一）本项目安全目标\n（1）不发生人身轻伤及以上事故；\n（2）不发生设备损坏事故；\n（3）不发生火灾事故；\n（4）不发生交通事故；\n（5）不发生环保事件；\n（6）不发生违法、违纪及与当地居民发生冲突等治安事件。\n（二）本项目存在的安全风险主要有：无人机飞行风险、汛期自然灾害、常规测量人员滑到摔伤、道路交通风险等\n（三）项目安全管理安全措施\n（1）项目开展工作前须对测区全面踏勘，辨识主要安全风险，制定安全管控措施；\n（2）结合项目实际情况开展安全教育培训，提高参与人员安全意识；\n（3）时下正值主汛期，须关注施测地域气象、道路、地质灾害等信息，遇到雷雨、大风（5级以上）、暴雨、高温等极端天气暂停外业作业；\n（4）本项目属于分包项目，相关单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（5）在像控点采集、地形点检查、控制点埋设等工作中，严防人员摔伤滑到，全员穿好防护鞋，测量点选取须注意周边环境安全；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（7）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（8）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（9）野外工作中有沟、槽、孔、洞，通过湿滑路面时，注意脚下，防止滑倒、摔倒等事故发生；\n（10）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩\n（11）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '时下正值主汛期，须关注施测地域气象、道路、地质灾害等信息，遇到雷雨、大风（5级以上）、暴雨、高温等极端天气暂停外业作业.', NULL, '2023-07-04', '2024-05-02');
INSERT INTO `cmc_safe` VALUES ('1648881411499491372', '1648881411499491372', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '(一）本项目安全目标\n（1）不发生人身轻伤及以上事故；\n（2）不发生设备损坏事故；\n（3）不发生火灾事故；\n（4）不发生交通事故；\n（5）不发生环保事件；\n（6）不发生违法、违纪及与当地居民发生冲突等治安事件。\n（二）本项目存在的安全风险主要有：无人机飞行风险、汛期自然灾害、常规测量人员滑到摔伤、道路交通风险等\n（三）项目安全管理安全措施\n（1）项目开展工作前须对测区全面踏勘，辨识主要安全风险，制定安全管控措施；\n（2）结合项目实际情况开展安全教育培训，提高参与人员安全意识；\n（3）时下正值主汛期，须关注施测地域气象、道路、地质灾害等信息，遇到雷雨、大风（5级以上）、暴雨、高温等极端天气暂停外业作业；\n（4）本项目属于分包项目，相关单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（5）在像控点采集、地形点检查、控制点埋设等工作中，严防人员摔伤滑到，全员穿好防护鞋，测量点选取须注意周边环境安全；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（7）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（8）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（9）野外工作中有沟、槽、孔、洞，通过湿滑路面时，注意脚下，防止滑倒、摔倒等事故发生；\n（10）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩\n（11）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '须与相关方签订安管协议，结合项目进度、实际情况做好日常安全检查和指导，进入主汛期野外作业做好自然灾害防范措施', NULL, '2023-07-04', '2024-04-29');
INSERT INTO `cmc_safe` VALUES ('1648881411499491373', '1648881411499491373', 145, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患:淹溺、汛期地质灾害、气象灾害、无人机飞行风险、交通安全、消防安全、摔伤，滑到等。 \n（三）项目安全管理安全措施\n（1）项目涉及水下地形测量、无人机飞行、像控点采集等工作，目前正值汛期，野外作业安全风险相对较高，项目人员须高度重视作业安全，提升安全意识，工作之前须结合项目实际情况开展安全教育培训，告知从业人员岗位作业安全风险；\n（2）严格遵守《测绘人员安全规范》、《无人机航摄安全作业基本要求》及公司安全管理制度、安全炒作规程；\n（3）无人机飞行作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（4）项目驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能，不分心驾驶、疲劳驾驶；\n（5）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（6）作业前，调查了解气候情况，关注天气变化，大风大雨禁止外出测量和施工作业；\n（7）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（8）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（9）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（10）像控点采集、检查点测量等作业时，须穿防滑鞋，危险区域测量时限评估安全风险，切记冒险作业，工作中严防人员滑到、摔伤；\n（11）本次水下地形测量全程采用无人船作业，工作人员沿江边遥控无人船须穿戴好救生衣，做好人员防摔倒。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本次无人机飞行区域属于城区和水电站区域，飞行前须到相关部门报备，水下地形测量中无人船操作人员须穿戴好救生衣，作业中严防人员滑到摔伤。', NULL, '2023-06-25', '2023-10-31');
INSERT INTO `cmc_safe` VALUES ('1648881411499491374', '1648881411499491374', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：无人机飞行安全风险、森林火险、消防安全、交通安全、边坡坠物（落石）、防盗、防动物伤害等\n（二）针对隐患源制定的安全措施：\n（1）测区地处汉源县皇木镇附近，午后风较大，无人机飞行请选择合适时段，像控点、控制点采集中所有人员穿戴好防滑鞋；\n（2）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路。\n（3）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育。\n（4）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）作业前做好安全防护用品、急需的野外作业的应急药品的准备。\n（7）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（8）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区地处汉源县皇木镇附近，午后风较大，无人机飞行请选择合适时段，像控点、控制点采集中所有人员穿戴好防滑鞋', NULL, '2023-06-21', '2023-07-14');
INSERT INTO `cmc_safe` VALUES ('1648881411499491375', '1648881411499491375', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患:汛期地质灾害、气象灾害、无人机飞行风险、交通安全、消防安全、摔伤，滑到等。 \n（三）\n（1）项目地处眉山地区，涉及无人机飞行、像控点采集、控制点埋设测量等工作，目前正值汛期，野外作业安全风险相对较高，项目人员须高度重视作业安全，提升安全意识，工作之前须结合项目实际情况开展安全教育培训，告知从业人员岗位作业安全风险；\n（2）严格遵守《测绘人员安全规范》、《无人机航摄安全作业基本要求》及公司安全管理制度、安全炒作规程；\n（3）无人机飞行作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（4）项目驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能，不分心驾驶、疲劳驾驶；\n（5）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（6）作业前，调查了解气候情况，关注天气变化，大风大雨禁止外出测量和施工作业；\n（7）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（8）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（9）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（10）像控点采集、检查点测量等作业时，须穿防滑鞋，危险区域测量时限评估安全风险，切记冒险作业，工作中严防人员滑到、摔伤。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '像控点采集、检查点测量等作业时，须穿防滑鞋,工作中严防人员滑到、摔伤,无人机飞行须严格遵守公司安全操作规程', NULL, '2023-06-20', '2024-03-26');
INSERT INTO `cmc_safe` VALUES ('1648881411499491376', '1648881411499491376', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患:汛期地质灾害、气象灾害、无人机飞行风险、交通安全、消防安全、摔伤，滑到等。 \n（三）项目安全管理安全措施\n（1）项目涉及无人机飞行、像控点采集、控制点埋设测量等工作，目前正值汛期，野外作业安全风险相对较高，项目人员须高度重视作业安全，提升安全意识，工作之前须结合项目实际情况开展安全教育培训，告知从业人员岗位作业安全风险；\n（2）严格遵守《测绘人员安全规范》、《无人机航摄安全作业基本要求》及公司安全管理制度、安全炒作规程；\n（3）无人机飞行作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（4）项目驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能，不分心驾驶、疲劳驾驶；\n（5）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（6）作业前，调查了解气候情况，关注天气变化，大风大雨禁止外出测量和施工作业；\n（7）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（8）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（9）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（10）像控点采集、检查点测量等作业时，须穿防滑鞋，危险区域测量时限评估安全风险，切记冒险作业，工作中严防人员滑到、摔伤。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '作业前结合项目实际开展安全教育培训，做好项目实施过程中安全管理，无人机飞行须严格遵守安全操作规程，汛期来临，野外作业遇极端天气（5级以上大风、雷电等）暂停作业', NULL, '2023-06-20', '2024-03-26');
INSERT INTO `cmc_safe` VALUES ('1648881411499491377', '1648881411499491377', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。\n（二）本项目存在的主要安全隐患：汛期自然灾害、无人机飞行安全风险、森林火险、消防安全、交通安全、边坡坠物（落石）、防盗、防动物伤害等\n（二）针对隐患源制定的安全措施：\n（1）作业前做好安全防护用品、急需的野外作业的应急药品的准备。\n（2）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路。\n（3）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育。\n（4）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（8）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外\n（9）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。发现测区有灾害性天气预警，工作做好合理安排。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等；\n（10）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩；\n（11）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（12）项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '汛期来临，外业作业中严防边坡落石、洪涝、气象等自然灾害，在像控点、检查点采集中要求项目人员穿防滑鞋，杜绝人员滑倒、摔伤事故发生', NULL, '2023-06-06', '2023-09-28');
INSERT INTO `cmc_safe` VALUES ('1648881411499491378', '1648881411499491378', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：消防安全、交通安全、办公室用电安全、数据安全等。 \n（二）针对隐患源制定的安全措施：\n（1）本项目不涉及外业测绘，安全风险相对较低，内业工作中须加强办公室安全管理；\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2023-06-05', '2024-02-21');
INSERT INTO `cmc_safe` VALUES ('1648881411499491379', '1648881411499491379', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：汛期自然灾害、高原病、边坡落石（坠物）、道路交通、无人机飞行风险、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）测区道路条件较差，危险路段须先下车查看，不冒险前行，驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（4）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（8）高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣；\n（9）项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（10）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（11）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（12）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（13）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。\n\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区海拔较高，多关注参与人员身体健康情况，做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。', NULL, '2023-06-05', '2024-04-06');
INSERT INTO `cmc_safe` VALUES ('1648881411499491380', '1648881411499491380', 121, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：边坡落石、消防安全、交通安全、森林防火、工作中摔伤、滑倒等。 \n（三）针对隐患源制定的安全措施：\n（1）工作开展之前，现场负责人结合项目实际辨识测区存在安全风险及危险源，并告知项目参与人员；\n（2）项目负责人须开展野外作业专项安全教育培训，并做好教育培训记录；\n（3）加强班组安全管理，开展好班前安全教育活动；\n（4）测绘作业严格遵守《测绘人员安全规范》及公司安全操作规程；\n（5）阿坝州目前处于森林防火严管期，所有人员在测区不得抽烟、携带火种，严格遵守属地政府相关管理规定；\n（6）本项目测区在金川水电站业主营地对面，采用全站仪现场实测地形图和征地红线放点，工作中做好现场沟通、协调，严防人员滑到、摔伤；\n（7）加强日常驾驶员安全教育培训，不分心驾驶、疲劳驾驶，路边临时停车须做好过往车辆、行人安全提醒和交通安全防范措施。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区在金川水电站业主营地对面，采用全站仪现场实测地形图和征地红线放点，工作中做好现场沟通、协调，严防人员滑到、摔伤，午后风大，注意边坡落石。', NULL, '2023-06-02', '2024-03-12');
INSERT INTO `cmc_safe` VALUES ('1648881411499491381', '1648881411499491381', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全风险：汛期地质灾害风险、道路交通风险、夏季野外作业中暑、消防安全、雷雨天气、界桩制作搬运人员摔伤、砸伤等。 \n（三）作业中须注意的安全措施（注意事项）：\n（1）本项目涉及和相关单位配合测量、界桩制作、搬运、安装等，安全风险相对较高，项目人员须高度重视安全工作；\n（2）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，工作做好合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等；\n（3）高山峡谷地区野外作业，严防边坡落石，危险路段观察通行；\n（4）天气炎热，做好中暑等措施，项目购置藿香正气液等防暑药品；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行；\n（7）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（8）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '配合测量中做好沟通、协调工作，在界桩制作、安装、搬运、施测中，严防人员滑倒摔伤，所有人员须穿防滑鞋，三伏天预防人员中暑，合理安排时间，汛期地质灾害较多，提前关注测区气象、地灾等情况，极端天气暂停野外作业', NULL, '2023-07-15', '2024-03-26');
INSERT INTO `cmc_safe` VALUES ('1648881411499491382', '1648881411499491382', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）车辆排放符合国家标准，不会对周围环境产生污染；\n（3）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（4）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到、动植物伤害等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）加强项目道路交通管理，作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（10）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为;\n（11）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、边坡落石等自然灾害防范工作，遇到极端天气暂停外业工作；\n（12）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（13）外业工作要预防中暑和晒伤，配备防暑药品，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物。外业工作中配备安全设备和药品，预防犬、毒蜂、蛇等动物伤害\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；做好汛期因暴雨引发的山洪、泥石流、山体滑坡、边坡落石等自然灾害防范工作，遇到极端天气暂停外业工作。', NULL, '2023-05-22', '2024-05-17');
INSERT INTO `cmc_safe` VALUES ('1648881411499491383', '1648881411499491383', 145, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）车辆排放符合国家标准，不会对周围环境产生污染；\n（3）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（4）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患:高处坠落、边坡落石（坠物）、道路交通、无人机飞行风险、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能，不分心驾驶、疲劳驾驶；\n（4）禁止食用霉烂、变质和被污染过的食物以及野菜、野果、野生菌菇等野生植物。禁止酗酒和暴饮暴食。不接触和不食用死、病畜肉。禁止饮用异味、异色和被污染的地表水和井水；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（8）在人、车流量大的道路作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌(墩)，并安排专人担任安全警戒员。迁站时要撤除安全警示标志牌(墩)，肩扛器材时应纵向，防止发生意外；\n（9）项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（10）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（11）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守.\n（12）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业，', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区道路部分属于乡村道路、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶；路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。', NULL, '2023-05-22', '2023-09-08');
INSERT INTO `cmc_safe` VALUES ('1648881411499491384', '1648881411499491384', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：汛期自然灾害、淹溺、高处坠落、消防安全、触电、摔伤、跌倒等风险。\n（三）针对隐患源制定的安全措施：\n（1）本项目涉及控制测量、水下地形测绘等工作，控制点选取位置须保证作业安全，无人船开展水下地形测量时，岸边操作人员穿戴好救生衣；\n（2）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故；\n（3）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚；\n（4）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（5）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规；\n（6）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及控制测量、水下地形测绘等工作，控制点选取位置须保证作业安全，无人船开展水下地形测量时，岸边操作人员穿戴好救生衣.', NULL, '2023-05-16', '2024-01-13');
INSERT INTO `cmc_safe` VALUES ('1648881411499491385', '1648881411499491385', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的危险（有害）因素有：森林火险、淹溺、高处坠落、物体打击、消防安全、触电、摔伤、跌倒、高原病、动物伤害等风险。\n（三）针对隐患源制定的安全措施：\n（1）严格遵守两河口水电站安全管理制度，按要求编制好项目安全管理、文明施工等措施；\n（2）两河口水电站大坝至雅江县城部分路段存在县道改造施工，在断面测量时，请关注施工情况，避免因交叉作业沟通不畅，导致事故；\n（3）项目车辆做好日常维护保养，不得病车上路，驾驶员不得疲劳驾驶，分心驾驶，危险路段谨慎通行；\n（4）水上作业和临水边作业须全程穿戴好符合要求的救生衣，选择合理行船速度，水上作业必须有2人以上方可进行，6级以上强风、大雨、雷电天气禁止水上作业；\n（5）工作人员严禁在库内游泳、戏水，严禁在船上和工作时间内饮酒；\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全\n；\n（7）在搬运设备、材料过程中，做好防护，防止脱落砸伤人员，在断面测量作业时工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过，所有人员须穿防滑鞋；\n（8）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚；\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程；\n（11）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（12）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（13）采用无人船作业时，工作前应对船只各部件进行全面检查，操作者须熟悉船只性能、参数及熟练掌握船只操作技能，无人船电池充电时须有人值守；\n（14）岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳；\n（15）工作期间，如遇坝身泄洪或水位异常变化，人员和设备应立即撤离至安全地带。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '两河口水电站大坝至雅江县城部分路段存在县道改造施工，在断面测量时，请关注施工情况，避免因交叉作业沟通不畅，导致事故，临水边作业请随时关注两河口水电站泄洪及水情变化情况。', NULL, '2023-05-06', '2023-08-22');
INSERT INTO `cmc_safe` VALUES ('1648881411499491386', '1648881411499491386', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的危险（有害）因素有：森林火险、高处坠落、物体打击、消防安全、触电、摔伤、跌倒、高原病、动物伤害等风险。\n（三）针对隐患源制定的安全措施：\n（1）严格遵守西藏电建成勘院工程有限公司安全管理制度，按要求编制好项目安全管理、文明施工等措施；\n（2）项目地处高原地区，作业前做好参与人员健康筛查，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生；\n（3）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（4）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（5）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定；\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（7）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（8）项目如需租用车辆，须签订租车协议，明确各自安全职责，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关；\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程；\n（11）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（12）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '藏区军事管制区较多，无人机飞行前须先报备，许可后方可开展作业，项目如需租用车辆，须签订租车协议，明确各自安全职责，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。', NULL, '2023-05-06', '2024-05-09');
INSERT INTO `cmc_safe` VALUES ('1648881411499491387', '1648881411499491387', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（一）本项目存在的安全隐患：交通安全、森林防火、消防安全、高原病、野外作业自然灾害、工作中滑到摔伤及防狗咬等。 \n（二）针对隐患源制定的安全措施：\n1、本项目主要工作为和其他相关单位配合测量，工作中严格遵守甲方安全管理规定，做好沟通、协调工作；\n2、项目负责人工作前须将工作内容、存在的安全风险及控制措施告知作业人员；\n3、结合项目实际开展安全教育培训，并留下记录；\n4、严格遵守属地政府森林防火规定，进入林区不携带火种，不在林区吸烟、用火；\n5、野外作业须提前了解作业区域气象等天气情况，遇大风（5级及以上）、雷电等极端天气停止外业工作；\n6、高原作业合理安排作业时间，对作业人员健康情况进行排查，有以下情况或医师嘱咐者不宜进入高原：严重的心脏、肾部、肺部、肝部、高血压等疾病；\n7、加强项目人员消防安全教育培训，外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋，\n8、乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查；\n9、临空临边作业必须采取防滑、防坠措施，确保人员和测绘设备安全；\n10、出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '配合测量中严格遵守甲方安全管理规定，做好沟通、协调工作。', NULL, '2023-05-05', '2024-03-29');
INSERT INTO `cmc_safe` VALUES ('1648881411499491388', '1648881411499491388', 145, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：森林火险、高处坠落、物体打击、消防安全、消防安全、摔伤、滑到等风险。\n（三）针对隐患源制定的安全措施：\n（1）严格遵守与甲方签订安全分管协议中管理规定，作业前开展项目安全教育培训；\n（2）作业前穿戴好手套、安全帽、反光背心等劳动防护用品；\n（3）工作中不得酒后作业、嬉戏打闹，爱护环境，不得随意丢弃垃圾；\n（4）按公司要求加强临时用工管理，做好安全教育培训和工作中安全提醒；\n（5）项目负责人（现场负责人）及时制止和纠正不安全行为，结合项目实际开展班组安全管理；\n（6）严格遵守属地政府森林防火管理规定，所有人员在作业区域不得吸烟，不得带火种进入林区；\n（7）作业区域涉及乡村道路、危险路段，加强驾驶员安全管理，不疲劳驾驶、分心驾驶，不病车上路；\n（8）在项目实施期间，所有人员不得私自外出，离开驻地须得到项目负责人许可；\n（9）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；\n（10）作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全排查，了解住宿环境、安全通道、消防设备位置，禁止入宿存在安全隐患的房屋；\n（11）在控制选点时充分考虑点位周边是否存在边坡落石、塌陷等情况，确保作业人员在测量时安全，野外作业遇大风（5级及以上）、雷雨等极端天气应停止作业；\n（12）项目须做好员工道路交通安全教育培训，驾驶员不疲劳驾驶、分心驾驶，项目车辆须做好日常维护保养，避免病车上路。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '在控制选点时充分考虑点位周边是否存在边坡落石、塌陷等情况，野外作业遇大风（5级及以上）、雷雨等极端天气应停止作业。', NULL, '2023-04-28', '2024-03-29');
INSERT INTO `cmc_safe` VALUES ('1648881411533045762', '1648881411533045762', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）目前正值岁末年初，进出场车流量大，道路交通风险高，请加强项目道路交通管理，作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（10）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '临近春节，人员情绪波动较大，工作中做好安全提醒', NULL, '2023-01-13', '2024-04-07');
INSERT INTO `cmc_safe` VALUES ('1648881411562405890', '1648881411562405890', 149, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）目前正值岁末年初，进出场车流量大，道路交通风险高，请加强项目道路交通管理，作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（10）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-12-29', '2023-06-14');
INSERT INTO `cmc_safe` VALUES ('1648881411587571714', '1648881411587571714', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）目前正值岁末年初，进出场车流量大，道路交通风险高，请加强项目道路交通管理，作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（10）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-12-29', '2023-07-27');
INSERT INTO `cmc_safe` VALUES ('1648881411612737537', '1648881411612737537', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）目前正值岁末年初，进出场车流量大，道路交通风险高，请加强项目道路交通管理，作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（10）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '目前正值岁末年初，进出场车流量大，道路交通风险高，请加强项目道路交通管理，无人机飞行须严格遵守安全操作规程。', NULL, '2022-12-29', '2023-07-27');
INSERT INTO `cmc_safe` VALUES ('1648881411633709057', '1648881411633709057', 39, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的主要安全隐患：城区道路交通、消防安全、工作中滑到摔伤等\n安全生产与职业健康要求 \n（三）针对隐患源制定的安全措施：\n（1）现场作业时，必须遵守业主及相关单位安全、技术操作规程，穿戴好相应的劳动安全防护用具，注意人身和仪器的安全，禁止冒险作业。\n（2）作业中佩戴好安全帽、反光背心、手套、安全带、安全绳等安全设备和增加防护措施，注意作业区上部滚石、高空坠物等。\n（3）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与现场施工人员或管理人员取得联系。作业应佩戴必要的安全防护用品和通讯设施，作业时注意洞顶物件坠落、坍塌、渗（漏）水等情况。若发现重金属、有害气体等危险物质，应立即停止作业，撤出洞内，并及时报告。\n（4）严禁触碰施工现场电气设备，进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（5）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生.\n（6）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意.；\n（7）城区开展作业道路交通安全风险高，作业前须做好安全防护措施，穿戴好反光背心，车流量大的路段，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-12-29', '2023-07-29');
INSERT INTO `cmc_safe` VALUES ('1648881411650486273', '1648881411650486273', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：道路交通风险、森林火险、触电、食物中毒、跌倒、高原病等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于西藏羊湖水电站区域，属于高海拔、高山峡谷地区，对作业人员身体健康要求较高，进场前做好人员健康筛查，有严重的心脏、肾部、肺部、肝部、高血压等疾病或医嘱者不得参与此项目，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）严格遵守羊湖水电站各项安全管理规定，穿戴好反光背心等防护用品，工作中不得随意触碰各种电器设备，不酒后开展作业，工作之余不酗酒。\n（3）项目进出场和测区转换路途遥远，涉及简易公路、危险路段、山区路段较多，提醒驾驶员不疲劳驾驶，冒险驾驶。通过危险路段先查看，在确保安全前提下谨慎通过。\n（4）目前正值秋冬季节，高海拔地区冰雪道路较多，特别是暗冰路段极易造成交通事故，出发前检查好车况，备齐防滑链等车用应急物品。\n（5）秋冬季节也是藏区森林防火严管期，所有人员在林区严禁吸烟、携带火种，更不得野外用火。\n（6）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品（红景天口服液、高原康、葡萄糖口服液等）。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定。\n（7）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（8）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（11）野外工作中有沟、槽、孔、洞，通过湿滑路面时，注意脚下，防止滑倒、摔倒等事故发生。\n（12）施工控制网建网、施测过程需要临时用工时，用工前需每人购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥\n（13）项目如需租用车辆，须签订租车协议，租用车辆须车况良好，第三者责任险须50万以上，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严格遵守羊湖水电站各项安全管理规定，目前正值秋冬季节，高海拔地区冰雪道路较多，特别是暗冰路段极易造成交通事故，出发前检查好车况，备齐防滑链等车用应急物品，野外工作中有沟、槽、孔、洞，通过湿滑路面时，注意脚下，防止滑倒、摔倒等事故发生。', NULL, '2022-12-26', '2023-11-16');
INSERT INTO `cmc_safe` VALUES ('1648881411667263489', '1648881411667263489', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患:钻机作业机械伤害、高处坠落、边坡落石（坠物）、道路交通、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《水电水利工程钻探规程等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）岩土勘察作业前，应对危险源进行辨识和评价，编写勘察纲要时，应根据不同危险等级制定相应的安全生产防护措施；\n（3）岩土勘察作业点不宜布置在高压输电线路下方，当勘察作业点布置在地上架空线、地下管线、设施以及构筑物的安全保护范围内时，安全生产防护措施应符合地上架空线、地下管线设施及构筑物所有者的有关管理规定；\n（4）作业场地四周应设置安全警示标志、围挡、隔离带或防撞设施等，夜间应设置安全警示灯，作业人员应穿反光背心\n（5）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（6）禁止食用霉烂、变质和被污染过的食物以及野菜、野果、野生菌菇等野生植物。禁止酗酒和暴饮暴食。不接触和不食用死、病畜肉。禁止饮用异味、异色和被污染的地表水和井水；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（8）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（10）在人、车流量大的道路作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌(墩)，并安排专人担任安全警戒员。迁站时要撤除安全警示标志牌(墩)，肩扛器材时应纵向，防止发生意外；\n（11）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（12）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（13）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '和相关方共同开展作业须签订安全分管协议，明确各自安全职责，钻探作业中严防机械伤害、物体打击等事故发生', NULL, '2022-12-29', '2023-02-27');
INSERT INTO `cmc_safe` VALUES ('1648881411688235010', '1648881411688235010', 59, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：交通风险、消防安全、触电、作业中摔伤砸伤、动物伤害（狗咬）等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及在城区、乡镇数据收集、声像资料采集等工作，内业资料处理为主，工作中严防资料安全管理，住宿地消防安全，在存放资料区域严禁火源、严禁吸烟，随意丢弃烟头等。\n（2）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为。\n（3）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素。。\n（7）和相关方共同开展作业时，须签订安全分管协议和测绘资料保密协议，项目负责人对委托单位安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（8）资料应做好备份，以防丢失；保管好设备防止丢失。\n（9）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人。\n（10）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-12-26', '2023-07-03');
INSERT INTO `cmc_safe` VALUES ('1648881411705012226', '1648881411705012226', 59, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：交通风险、消防安全、触电、作业中摔伤砸伤、动物伤害（狗咬）等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及在城区、乡镇数据收集、声像资料采集等工作，内业资料处理为主，工作中严防资料安全管理，住宿地消防安全，在存放资料区域严禁火源、严禁吸烟，随意丢弃烟头等。\n（2）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为。\n（3）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素。。\n（7）和相关方共同开展作业时，须签订安全分管协议和测绘资料保密协议，项目负责人对委托单位安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（8）资料应做好备份，以防丢失；保管好设备防止丢失。\n（9）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人。\n（10）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '和相关方共同开展作业时须签订安全分管协议，加强安全监管，乡村道路驾车选择合理车速', NULL, '2022-12-26', '2023-12-07');
INSERT INTO `cmc_safe` VALUES ('1648881411730178050', '1648881411730178050', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：高原病、边坡落石（坠物）、道路交通、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）时下正值冬季，测区冰雪道路较多，危险路段须先下车查看，不冒险前行，驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（4）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（8）时下正值秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣；\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（10）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测；\n（11）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（12）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守。\n\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '时下正值秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣。', NULL, '2022-12-07', '2023-05-04');
INSERT INTO `cmc_safe` VALUES ('1648881411751149569', '1648881411751149569', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：高原病、淹溺、边坡落石（坠物）、道路交通、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）时下正值冬季，测区冰雪道路较多，危险路段须先下车查看，不冒险前行，驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（4）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（8）时下正值秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣；\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（10）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测；\n（11）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（12）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守。\n\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '藏区冰雪道路多，特别是涉及无人机起飞点、像控点采集地道路复杂，请提醒驾驶员危险路段一定先查看，不冒险前行，水下地形测量全程穿戴好救生衣，河边行走注意防滑、防摔倒。', NULL, '2022-12-07', '2023-08-15');
INSERT INTO `cmc_safe` VALUES ('1648881411772121090', '1648881411772121090', 94, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：高原病、淹溺、边坡落石（坠物）、道路交通、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）时下正值冬季，测区冰雪道路较多，危险路段须先下车查看，不冒险前行，驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（4）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（8）时下正值秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣；\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（10）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（11）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守。\n\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区冰雪道路较多，请提醒驾驶员高度重视，工作中严防人员摔伤、滑到事故发生，森林防火期内，测区严禁吸烟', NULL, '2022-12-26', '2023-09-02');
INSERT INTO `cmc_safe` VALUES ('1648881411788898306', '1648881411788898306', 138, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '安全生产与职业健康要求\n（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：城区作业安全风险、道路交通、消防安全、高处坠落、物体打击、机械伤害、坍塌、触电、摔倒等安全风险等。 \n（三）针对隐患源制定的安全措施：\n（1）重庆分公司或者项目部须结合现场实际情况制定监测作业安全管理制度、安全生产责任制，建立项目安全组织机构，与公司和项目员工签订安全生产责任书；\n（2）现场作业时，必须遵守业主及相关单位安全管理规定，请重点关注合同里面涉及安全的要求，安全技术操作规程；\n（3）测绘作业中请务必注意自身与他人安全，请正确穿戴好反光背心、防滑鞋、防刺穿、防砸鞋子，安全帽等个体防护用品；\n（4）严禁触碰施工现场电气设备，进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（5）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、分心驾驶、超速行驶。加强车辆维护保养、安全检查，重庆夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（6）城区道路水准监测作业中安全风险高，项目负责人做好人员和作业时间合理安排，夜间作业摆放好反光锥、警示器、荧光棒等，提醒过往车辆和行人，夜间作业前参与人员保证足够的休息和睡眠时间，人员安排尽可能富余，避免因人员安排不够导致疲劳作业；\n（7）项目工作期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（8）涉及工程项目规模、方案等保密信息均不能擅自透露他人，要求任何人员不得擅自印制、留存本项目涉及的文件资料，同时本项目涉及的信息内容均不得通过互联网等方式进行传播、宣传；\n（9）项目临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（10）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素；\n（11）重庆分公司结合项目实际，开展员工安全教育培训，并做好记录，做好日常安全宣传，安全法律法规及上一级单位安全文件宣贯工作；\n（12）重庆夏天天气炎热，项目须储备防暑降温药品、物品，露天作业须合理安排作业时间，极端炎热天气暂停外业工作；\n（13）项目居住在租住房屋内，加强人员消防安全意识教育，不卧床吸烟，做到人离开关闭电源、燃气开关，电器设备充电应使用具有安全认证的电源插座和充电器，不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对大功率电器设备充电时应专人值守；\n（14）本项目属于分包项目，相关单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目去年已完成，安全交底补登', NULL, '2023-08-14', '2023-09-28');
INSERT INTO `cmc_safe` VALUES ('1648881411788898307', '1648881411788898307', 138, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '安全生产与职业健康要求\n（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：城区作业安全风险、道路交通、消防安全、高处坠落、物体打击、机械伤害、坍塌、触电、摔倒等安全风险等。 \n（三）针对隐患源制定的安全措施：\n（1）重庆分公司或者项目部须结合现场实际情况制定监测作业安全管理制度、安全生产责任制，建立项目安全组织机构，与公司和项目员工签订安全生产责任书；\n（2）现场作业时，必须遵守业主及相关单位安全管理规定，请重点关注合同里面涉及安全的要求，安全技术操作规程；\n（3）测绘作业中请务必注意自身与他人安全，请正确穿戴好反光背心、防滑鞋、防刺穿、防砸鞋子，安全帽等个体防护用品；\n（4）严禁触碰施工现场电气设备，进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（5）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、分心驾驶、超速行驶。加强车辆维护保养、安全检查，重庆夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（6）城区道路水准监测作业中安全风险高，项目负责人做好人员和作业时间合理安排，夜间作业摆放好反光锥、警示器、荧光棒等，提醒过往车辆和行人，夜间作业前参与人员保证足够的休息和睡眠时间，人员安排尽可能富余，避免因人员安排不够导致疲劳作业；\n（7）项目工作期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（8）涉及工程项目规模、方案等保密信息均不能擅自透露他人，要求任何人员不得擅自印制、留存本项目涉及的文件资料，同时本项目涉及的信息内容均不得通过互联网等方式进行传播、宣传；\n（9）项目临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（10）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素；\n（11）重庆分公司结合项目实际，开展员工安全教育培训，并做好记录，做好日常安全宣传，安全法律法规及上一级单位安全文件宣贯工作；\n（12）重庆夏天天气炎热，项目须储备防暑降温药品、物品，露天作业须合理安排作业时间，极端炎热天气暂停外业工作；\n（13）项目居住在租住房屋内，加强人员消防安全意识教育，不卧床吸烟，做到人离开关闭电源、燃气开关，电器设备充电应使用具有安全认证的电源插座和充电器，不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对大功率电器设备充电时应专人值守；\n（14）本项目属于分包项目，相关单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目去年已完成，安全交底补登', NULL, '2023-08-14', '2023-09-28');
INSERT INTO `cmc_safe` VALUES ('1648881411809869825', '1648881411809869825', 35, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：边坡落石（坠物）、道路交通、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）项目如需租用车辆，须签订租车协议，明确各自安全职责，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关；\n（4）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（6）在人、车流量大的道路作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌(墩)，并安排专人担任安全警戒员。迁站时要撤除安全警示标志牌(墩)，肩扛器材时应纵向，防止发生意外；\n（7）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（8）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测；\n（9）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目如需租用车辆，须签订租车协议，明确各自安全职责，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关', NULL, '2022-12-06', '2023-04-17');
INSERT INTO `cmc_safe` VALUES ('1648881411826647041', '1648881411826647041', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：边坡落石（坠物）、道路交通、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（4）禁止食用霉烂、变质和被污染过的食物以及野菜、野果、野生菌菇等野生植物。禁止酗酒和暴饮暴食。不接触和不食用死、病畜肉。禁止饮用异味、异色和被污染的地表水和井水；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（8）在人、车流量大的道路作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌(墩)，并安排专人担任安全警戒员。迁站时要撤除安全警示标志牌(墩)，肩扛器材时应纵向，防止发生意外；\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（10）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测；\n（11）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（12）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（13）如需与相关方共同开展作业时，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '如需与相关方共同开展作业时，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。', NULL, '2022-12-05', '2024-05-02');
INSERT INTO `cmc_safe` VALUES ('1648881411847618561', '1648881411847618561', 72, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：边坡落石（坠物）、道路交通、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（4）禁止食用霉烂、变质和被污染过的食物以及野菜、野果、野生菌菇等野生植物。禁止酗酒和暴饮暴食。不接触和不食用死、病畜肉。禁止饮用异味、异色和被污染的地表水和井水；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（8）在人、车流量大的道路作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌(墩)，并安排专人担任安全警戒员。迁站时要撤除安全警示标志牌(墩)，肩扛器材时应纵向，防止发生意外；\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（10）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测；\n（11）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（12）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '猴子岩水电站附近区域地处山谷河口午后风较大，无人机飞行须选择合适时段，所有人员严禁带火种进入林区，暗冰路段提醒驾驶员谨慎驾驶', NULL, '2022-11-28', '2023-08-22');
INSERT INTO `cmc_safe` VALUES ('1648881411868590081', '1648881411868590081', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：钻探作业中机械伤害、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目作业中涉及无人机飞行、地质勘察（钻探）、像控点测量和检查点采集等，请项目所有人员进场前做好身体健康筛查，加强安全生产宣传教育，开展好班前安全教育活动，树立安全第一的思想，不断强化安全意识；\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准；\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素；\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行；\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程及钻探安全操作规程等；\n（10）工作中严防摔伤、砸伤、滑倒，涉及在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施保证安全，对不能保证安全的区域，应绕道而行；\n\n（11）钻探作业中涉及和相关方共同开展作业时，须签订安全管理协议，相关方须具备相关从业资质，作业前进行安全交底，做好过程中安全检查、督导；\n（12）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施；\n\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '钻探作业涉及和相关方时，须签订安全分管协议，过好过程中安全监管，严防机械伤害事故发生，严格遵守测绘作业安全操作规程，进出场路途遥远，提醒驾驶员不疲劳驾驶、分心驾驶。', NULL, '2022-11-18', '2023-03-06');
INSERT INTO `cmc_safe` VALUES ('1648881411885367297', '1648881411885367297', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：边坡落石（坠物）、道路交通、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（4）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（5）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（6）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（7）在人、车流量大的道路作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌(墩)，并安排专人担任安全警戒员。迁站时要撤除安全警示标志牌(墩)，肩扛器材时应纵向，防止发生意外；\n（8）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（9）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测；\n（10）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '无人机飞行前须对测区影响飞行安全的危险源实地踏勘，不冒险飞行，进入林区所有人员禁带火种、不得吸烟，相关作业须严格遵守安全操作规程。', NULL, '2022-12-06', '2023-10-09');
INSERT INTO `cmc_safe` VALUES ('1648881411906338818', '1648881411906338818', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主要责任的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（7）安全隐患整改回复率100%。\n（二）本项目存在的安全隐患:钻机作业机械伤害、高处坠落、边坡落石（坠物）、道路交通、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、森林防火、物体打击、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《水电水利工程钻探规程》《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）岩土勘察作业前，应对危险源进行辨识和评价，编写勘察纲要时，应根据不同危险等级制定相应的安全生产防护措施；\n（4）岩土勘察作业点不宜布置在高压输电线路下方，当勘察作业点布置在地上架空线、地下管线、设施以及构筑物的安全保护范围内时，安全生产防护措施应符合地上架空线、地下管线设施及构筑物所有者的有关管理规定；\n（5）作业场地四周应设置安全警示标志、围挡、隔离带或防撞设施等，夜间应设置安全警示灯，作业人员应穿反光背心\n（6）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（7）禁止食用霉烂、变质和被污染过的食物以及野菜、野果、野生菌菇等野生植物。禁止酗酒和暴饮暴食。不接触和不食用死、病畜肉。禁止饮用异味、异色和被污染的地表水和井水；\n（8）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（9）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（10）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（11）在人、车流量大的道路作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌(墩)，并安排专人担任安全警戒员。迁站时要撤除安全警示标志牌(墩)，肩扛器材时应纵向，防止发生意外；\n（12）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（13）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测；\n（14）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（15）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '相关方开展作业时须查看其是否具备相关作业资格和安全生产条件，签订安全分管协议，明确各自安全职责，做好过程中安全监管，并留下管理痕迹，钻探作业中严防机械伤害和高处坠落等事故发生。', NULL, '2022-12-01', '2023-05-04');
INSERT INTO `cmc_safe` VALUES ('1648881411927310338', '1648881411927310338', 145, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：淹溺、森林火险、消防安全、交通安全、边坡坠物（落石）、动物伤害、新冠疫情等\n（二）针对隐患源制定的安全措施：\n（1）本项目涉及与相关方共同参与作业，工作前签订安全管理协议，明确相关方安全职责，项目监管人员，实时对项目开展安全监督，并留下管理痕迹；\n（2）项目负责人须了解、查验相关单位是否从事该项作业资格；\n（3）水域作业前须对测区先全面踏勘、了解危险源和作业中风险，做到心中有数，所有人员穿戴好符合要求的救生衣，包括岸边作业人员；\n（4）项目作业中影响资料（照片+视频）及时发送给公司专职安全员，遇到安全棘手问题及时和公司沟通，确保安全第一；\n（5）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路；\n（6）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育；\n（7）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头；\n（8）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（9）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（11）项目地处高原地区，作业前做好参与人员健康筛查，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品；\n（12）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，务必引起重视，做到人离断电。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目负责人须了解、查验相关单位是否从事该项作业资格，水域作业前须对测区先全面踏勘、了解危险源和作业中风险，做到心中有数，所有人员穿戴好符合要求的救生衣，包括岸边作业人员，', NULL, '2022-11-17', '2023-02-10');
INSERT INTO `cmc_safe` VALUES ('1648881411944087553', '1648881411944087553', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：边坡落石、高原病、森林火险、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区位于甘孜州九境内，作业中涉及无人机飞行、控制测量、像控点测量和检查点采集等，请项目所有人员进场前做好身体健康筛查，加强安全生产宣传教育，开展好班前安全教育活动，树立安全第一的思想，不断强化安全意识；\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准；\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素；\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行；\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度及测绘作业安全操作规程；\n（10）工作中严防摔伤、砸伤、滑倒，涉及在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施保证安全，对不能保证安全的区域，应绕道而行；\n（11）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定；\n（12）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，做好动物伤害；\n（13）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施；\n（14）在少数民族地区工作时，应尊重民族风俗和生活习惯，在社会治安差、人烟稀少的地区工作，应事先和当地政府及有关部门联系，取得当地政府和公安机关的支持。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '所有人员进入林区严禁吸烟、携带火种，无人机航飞作业严格遵守相关安全操作规程，进入冬季，藏区冰雪道路多，提醒驾驶员提高警惕，确保交通安全。', NULL, '2022-11-18', '2024-04-28');
INSERT INTO `cmc_safe` VALUES ('1648881411965059074', '1648881411965059074', 94, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：道路交通安全、森林防火、消防安全、新冠肺炎疫情、自然灾害、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行、像控点采集等，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）测区道路狭窄，测区路况较差，部分作业区域涉及土路，道路交通风险高，要求项目负责人加强道路交通监管，通过危险路段，先查看，谨慎通过，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务，并在作业前到所在区域治安大队或派出所报备；\n（5）操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20 m以外，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（6）无人机起降场地应选择在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故；\n（7）无人机作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人，每个架次须按规定填写《无人机飞行记录表》；\n（8）无人机电池充电时，须有人值守，使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（9）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（10）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度；\n（12）项目所有人员（包括临时用工）进入林区不得携带火种、不得在林区吸烟、违规用火，严格遵守当地政府森林（草原）防火规定;\n（13）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害.', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '进入秋冬季,林区测绘作业严格遵守属地政府森林防火规定,无人机飞行须严格遵守安全操作规程开展作业,野外作业提醒大家走路不看手机,严防滑倒\\摔伤.', NULL, '2022-11-15', '2023-07-07');
INSERT INTO `cmc_safe` VALUES ('1648881411986030594', '1648881411986030594', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件；有效防范各类自然灾害，避免人身伤害或财产损失；安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：道路交通、有人机飞行风险、新冠肺炎疫情、交通安全、消防安全、森林防火、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）本项目涉及有人机所有参与作业，所有人员做好健康筛查，有恐高症、高血压、心脏病等不得乘坐有人机参与航测外业，在机舱航测作业时，严格遵守相关安全管理规定，服从机长及工作人员管理，机舱内作业中不得使用明火、严禁吸烟，不得违规使用电子设备，航测仪器设备各固件须规范安装，做好稳固措施，作业前须储备氧气罐、晕机药品及血氧饱和度测试仪等，作业中身体有任何不适情况，第一时间告诉机长或工作人员并采取应急处理措施；\n（3）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（4）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（6）在人、车流量大的道路作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌(墩)，并安排专人担任安全警戒员。迁站时要撤除安全警示标志牌(墩)，肩扛器材时应纵向，防止发生意外；\n（7）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（8）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测；\n（9）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（10）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（11）项目如涉及和相关方共同开展作业，相关单位需具备此项目测绘作业资格，作业前需签订安全协议，协议中明确相关方安全职责和义务，项目管理人员加强安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及有人机所有参与作业，所有人员做好健康筛查，有恐高症、高血压、心脏病等不得乘坐有人机参与航测外业，在机舱航测作业时，严格遵守相关安全管理规定，服从机长及工作人员管理，机舱内作业中不得使用明火、严禁吸烟，不得违规使用电子设备，航测仪器设备各固件须规范安装，做好稳固措施，作业前须储备氧气罐、晕机药品及血氧饱和度测试仪等，作业中身体有任何不适情况，第一时间告诉机长或工作人员并采取应急处理措施', NULL, '2022-11-04', '2023-02-02');
INSERT INTO `cmc_safe` VALUES ('1648881412002807809', '1648881412002807809', 72, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件；有效防范各类自然灾害，避免人身伤害或财产损失；安全隐患整改回复率100%。\n（二）本项目存在的安全隐患：道路交通、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、森林防火、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（2）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（3）驾驶员应遵守道路交通安全有关的法律、法规，严格遵守行车安全操作规程和安全运行的各种要求，具备野外环境下驾驶车辆的技能，掌握所驾驶车辆的构造、技术性能、技术状况、保养和维修的基本知识或技能；\n（4）禁止食用霉烂、变质和被污染过的食物以及野菜、野果、野生菌菇等野生植物。禁止酗酒和暴饮暴食。不接触和不食用死、病畜肉。禁止饮用异味、异色和被污染的地表水和井水；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意;\n（8）在人、车流量大的道路作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌(墩)，并安排专人担任安全警戒员。迁站时要撤除安全警示标志牌(墩)，肩扛器材时应纵向，防止发生意外；\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（10）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测；\n（11）外业作业人员借宿民房或住宾馆（招待所）时，对住宿的房屋应进行安全性检查，了解住宿环境、安全通道、消防设备位置；禁止入宿存在安全隐患的房屋；\n（12）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（13）', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '甘孜州目前处于森林防火严管期，严格遵守相关规定，不得带火种进入林区，不在测区吸烟，工作中严防摔伤、滑倒，无人机飞行须严格遵守安全操作规程，遇到安全方面棘手问题及时和公司沟通。', NULL, '2022-11-02', '2023-07-16');
INSERT INTO `cmc_safe` VALUES ('1648881412023779329', '1648881412023779329', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高原病、消防安全、交通安全、森林防火、边坡坠物（落石）、作业中摔伤、新冠肺炎疫情等\n（三）针对隐患源制定的安全措施\n（1）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头；\n（2）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；\n（3）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品；\n（4）加强交通安全管理，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶。出差前检查防滑链等应急设备是否齐全；\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（7）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程；\n（8）加强临时住地消防安全管理，禁止在生产作业场所吸烟、禁止使用明火或明火取暖、禁止违规使用电器取暖。电器设备在不用时应关闭电源开关、切断电源。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '长途行车加强项目驾驶员道路交通安全意识教育，不疲劳驾驶、分心驾驶；高海拔地区合理安排作业时间，关注从业人员身体健康情况；目前处于森林防火严管期，所有人员须严格遵守属地政府森林防火管理规定。', NULL, '2022-10-31', '2023-07-12');
INSERT INTO `cmc_safe` VALUES ('1648881412040556545', '1648881412040556545', 81, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：道路交通、森林火险、林权数据安全、火灾、触电、新冠肺炎疫情、摔伤、跌倒、动物伤害等风险。\n（三）针对隐患源制定的安全措施：\n（1）仪陇县林权数据整合建库采购项目政府采购合同，工作中涉及与当地政府和群众接触较多，做好沟通、协调、解释工作，避免产生矛盾；\n（2）作业区域属于乡村道路，弯多路窄，当地老乡道路交通意识相对较差，作业人员沿公路作业时做好防护措施，穿戴好反光背心，项目驾驶员选择合理车速，弯道提前鸣号，谨慎驾驶；\n（3）项目车辆做好维护保养，保持良好车况，不得病车上路，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理，驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入作业区时，小心狗、毒蜂等动物伤害；\n（5）做好测绘成果资料保密、保存工作，特别是确权登记类的项目，纸质版资料较多，存放时间长，安全风险较大，做好消防安全、防潮防腐措施，办公区及资料堆积区严禁吸烟，结合现场实际配置足够数量灭火器，确保测绘资料安全；\n（6）不违规记录、存储、复制和传递项目资料信息，严格遵守《中华人民共和国保守国家秘密法》、《中华人民共和国测绘成果管理条例》、《测绘地理信息管理工作国家秘密范围的规定》、《四川省测绘成果管理办法》、《四川省涉密测绘成果管理规定》和相关保密要求，知悉应当承担的保密义务和法律责任；\n（7）如需与相关方共同开展作业时，应签订安全生产管理协议，明确各自职责与义务，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（8）外业作业时做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理；\n（9）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（10）项目如需租用车辆，须签订租车协议，明确各自安全职责，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关；\n（11）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（12）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故；\n（13）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（14）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（15）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程；\n（16）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案（第三版）和属地政府防控制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '工作中涉及与当地政府和群众接触较多，做好沟通、协调、解释工作，避免产生矛盾，不违规记录、存储、复制和传递项目资料信息，如与相关方参与作业须签订安全管理协议，明确各自安全职责，开展项目过程中安全检查、督导并留下管理痕迹。', NULL, '2022-10-28', '2023-05-18');
INSERT INTO `cmc_safe` VALUES ('1648881412057333761', '1648881412057333761', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：道路交通、森林火险、林权数据安全、火灾、触电、新冠肺炎疫情、摔伤、跌倒、动物伤害等风险。\n（三）针对隐患源制定的安全措施：\n（1）蓬安县林权类不动产登记数据整合项目政府采购合同（服务类）项目，工作中涉及与当地政府和群众接触较多，做好沟通、协调、解释工作，避免产生矛盾；\n（2）根据合同条款“乙方需为拟派本项目的所有人员购买工伤保险，在本项目实施过程中，如果出现任何工伤事故，乙方承担全部责任，与采购人无关”的要求须全员购买工伤保险；\n（3）作业区域属于乡村道路，弯多路窄，当地老乡道路交通意识相对较差，作业人员沿公路作业时做好防护措施，穿戴好反光背心，项目驾驶员选择合理车速，弯道提前鸣号，谨慎驾驶；\n（4）项目车辆做好维护保养，保持良好车况，不得病车上路，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理，驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为；\n（5）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入作业区时，小心狗、毒蜂等动物伤害；\n（6）做好测绘成果资料保密、保存工作，特别是确权登记类的项目，纸质版资料较多，存放时间长，安全风险较大，做好消防安全、防潮防腐措施，办公区及资料堆积区严禁吸烟，结合现场实际配置足够数量灭火器，确保测绘资料安全；\n（7）不违规记录、存储、复制和传递项目资料信息，严格遵守《中华人民共和国保守国家秘密法》、《中华人民共和国测绘成果管理条例》、《测绘地理信息管理工作国家秘密范围的规定》、《四川省测绘成果管理办法》、《四川省涉密测绘成果管理规定》和相关保密要求，知悉应当承担的保密义务和法律责任；\n（8）如需与相关方共同开展作业时，应签订安全生产管理协议，明确各自职责与义务，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（9）外业作业时做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理；\n（10）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（11）项目如需租用车辆，须签订租车协议，明确各自安全职责，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关；\n（12）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（13）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故；\n（14）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（15）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（16）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程；\n（17）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案（第三版）和属地政府防控制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '根据本项目合同条款，须对全员购买工伤保险，包括相关方，工作中涉及与当地政府和群众接触较多，做好沟通、协调、解释工作，避免产生矛盾，不违规记录、存储、复制和传递项目资料信息，与相关方共同参与作业须签订安全管理协议，明确各自安全职责。', NULL, '2022-10-27', '2023-03-13');
INSERT INTO `cmc_safe` VALUES ('1648881412074110977', '1648881412074110977', 94, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：矿区安全风险、道路交通、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于广东省境内，本项目涉及无人机航测作业、地形图调绘、像控点采集、检查点测量等工作，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（3）因工作需要租用车辆，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全，工作中做好驾驶员安全管理；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意\n（8）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（9）工作区域涉及矿区作业，严格遵守相关单位安全管理规定，不得随意进入有限空间，远离，野外工作中有沟、槽、孔、洞，通过湿滑路面时，注意脚下，防止滑倒、摔倒等事故发生；\n（10）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测。；\n（11）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（12）项目如需租用车辆，须签订租车协议，明确各自安全职责，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关，并符合公司安全管理规定；\n（13）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '进出场路途遥远，须提醒驾驶员不疲劳驾驶（连续驾车4小时休息时间不得低于20分钟），作业区域涉及矿区作业，严格遵守相关单位现场安全管理制度，无人机作业须遵守公司相关安全操作规程。', NULL, '2022-10-25', '2023-07-08');
INSERT INTO `cmc_safe` VALUES ('1648881412090888194', '1648881412090888194', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：消防安全、交通安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）目前处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，秋冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人，\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目不涉及外业作业，安全风险相对较低，工作中请重视办公区消防安全管理、严格遵守疫情防控措施。', NULL, '2022-10-25', '2023-11-16');
INSERT INTO `cmc_safe` VALUES ('1648881412107665410', '1648881412107665410', 120, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：水准测量安全风险、森林防火、边坡落实、触电交通安全、消防安全、新冠肺炎疫情、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于在建双江口水电站工区，本项目涉及控制网边角测绘、水准测量、水准测量等，安全风险较高，请测量中心负责人高度重视生产安全，提高全员安全意识；\n（2）严格遵守双江口水电站业主各项安全管理规定，服从业主管理，施工区涉及和相关单位交叉作业时，做好协调工作；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）作业区域处于水电站区域，工作时禁止触碰与工作无关的电气设备，工作现场禁止吸烟，野外作业禁止携带火种；\n（5）严禁在库内游泳、戏水、钓鱼，严禁酒后作业，测量期间，如遇坝身泄洪或水位异常变化，人员和设备应立即撤离至安全地带；\n（6）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路，目前测区存在冰雪道路，特别是暗冰路段，须高度警惕；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（8）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（9）路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（10）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度；\n（12）在建施工区机械设备较多，作业中须高度警惕，合理避让，避免机械伤害；\n（13）工作区域天气逐渐寒冷，办公区和住宿区存在采用油汀等大功率电器设备烤火取暖，项目负责人须规范管理，要求大家做好“人离断电”，做好消防安全工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '在建施工区作业严格遵守业主及施工单位现场安全管理规定，严防边坡落石、机械伤害、物体打击等事故发生，穿戴好劳动防护用品，沿公路水准测量时做好安全监管，藏区秋冬季冰雪道路较多，特别是暗冰路段须高度警惕，所有人员进入作业区域不得携带火种，不得在禁止吸烟区域吸烟。', NULL, '2022-10-25', '2023-09-27');
INSERT INTO `cmc_safe` VALUES ('1648881412124442625', '1648881412124442625', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：道路交通、边坡落石（坠物）、新冠肺炎疫情、消防安全、森林防火、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于石棉县境内，目前还处于地震后余震期，本项目涉及监测控制点土建、水准测量、边角测量等工作，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（3）作业前须对测区地质情况全面了解、评估，始终坚持不安全不作业，特别是严防边坡落石等地质灾害，作业中须全员佩戴安全帽；\n（4）沿公路开展水准测量时，做好警示工作，做好过往车辆、行人安全提醒，全员穿戴好反光背心，弯道测绘时派专人安全管理；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意\n（8）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（10）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '在9.5泸定地震中，测区新民集镇受损严重，目前还处于地震余震期，边坡落石等地质灾害时有发生，作业前须全面评估安全风险，做好不安全不作业，确保安全。', NULL, '2022-10-14', '2023-07-31');
INSERT INTO `cmc_safe` VALUES ('1648881412141219841', '1648881412141219841', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：水下地形测量溺水、无人机飞行风险、森林火险、交通安全、消防安全、高原病、新冠肺炎疫情、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及水下地形测量、无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）本项目水下地形测量采用无人船施测，作业前须对测区水流、水情全面查看，沿河道操作无人船须全员穿戴好救生衣，严防溺水事件发生；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目地处高原，项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度；\n（10）进场前做好作业人员健康筛查，严重的心脏病、高血压等疾病不参与本次作业。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目水下地形测量采用无人船施测，作业前须对测区水流、水情等全面了解，岸边无人船操作人员穿戴好符合要求救生衣，工作中须将作业影像（照片+视频）资料发送至公司专职安全员。', NULL, '2022-10-12', '2022-12-06');
INSERT INTO `cmc_safe` VALUES ('1648881412153802753', '1648881412153802753', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：道路交通、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、森林防火、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于广东省台境内，本项目涉及无人机航测作业、地形图调绘、像控点采集、检查点测量等工作，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（3）因工作需要租用车辆，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全，工作中做好驾驶员安全管理；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意\n（8）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（10）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '在地形图调绘和补测中严防人员滑到、摔伤，进入林区严格遵守属地政府森林防火规定，返回公司须严格遵守疫情防控规定（扫入川码、报备社区等）。', NULL, '2022-10-12', '2023-06-30');
INSERT INTO `cmc_safe` VALUES ('1648881412170579969', '1648881412170579969', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：水下地形测量溺水、水准测量安全风险、交通安全、消防安全、新冠肺炎疫情、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于攀枝花市境内，本项目涉及控制网边角测绘、水准测量、倒垂测量、一二等水准测量和水下地形测量，安全风险较高，请项目负责人高度重视生产安全，提高全员安全意识；\n（2）严格遵守大唐观音岩水电站业主各项安全管理规定，服从业主管理；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）作业区域处于水电站区域，工作时禁止触碰与工作无关的电气设备，工作现场禁止吸烟，野外作业禁止携带火种；\n（5）严禁在库内游泳、戏水、钓鱼，严禁酒后作业，测量期间，如遇坝身泄洪或水位异常变化，人员和设备应立即撤离至安全地带；\n（6）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（8）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（9）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（10）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度；\n（12）采用无人船作业时，工作前应对船只各部件进行全面检查，操作者须熟悉船只性能、参数及熟练掌握船只操作技能，全员穿戴好符合要求的救生衣，无人船电池充电时须有人值守。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严格遵守大唐观音岩水电站业主各项安全管理规定，服从业主管理，坝前水下地形测量安全风险高须高度重视，所有作业须严格按照公司测绘作业安全操作规程开展', NULL, '2022-09-30', '2023-07-17');
INSERT INTO `cmc_safe` VALUES ('1648881412204134402', '1648881412204134402', 94, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、森林火险、交通安全、消防安全、新冠肺炎疫情、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行，像控点测量、检查点采集、地形图调绘等作业，请项目负责人高度重视生产安全，提高安全意识；\n（2）项目作业时间正值国庆假期，进出场车流量大，道路交通风险高，请加强项目道路交通管理，作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素；\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（9）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目作业时间正值国庆假期，进出场车流量大，道路交通风险高，请加强项目道路交通管理，无人机飞行须严格遵守测绘安全操作规程，在林区作业不得携带火种，严禁吸烟', NULL, '2022-09-30', '2023-07-07');
INSERT INTO `cmc_safe` VALUES ('1648881412220911618', '1648881412220911618', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：道路交通安全、森林防火、消防安全、新冠肺炎疫情、自然灾害、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行、像控点采集等，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）测区道路狭窄，测区路况较差，部分作业区域涉及土路，道路交通风险高，要求项目负责人加强道路交通监管，通过危险路段，先查看，谨慎通过，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务，并在作业前到所在区域治安大队或派出所报备；\n（5）操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20 m以外，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（6）无人机起降场地应选择在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故；\n（7）无人机作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人，每个架次须按规定填写《无人机飞行记录表》；\n（8）无人机电池充电时，须有人值守，使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（9）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（10）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度；\n（12）项目所有人员（包括临时用工）进入林区不得携带火种、不得在林区吸烟、违规用火，严格遵守当地政府森林（草原）防火规定。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '部分测区道路属于土路，雨天泥泞道路风险高，请重点关注，通过危险路段先查看，谨慎通过；作业区属于大熊猫国家保护区，严格遵守保护区各项规定，严禁在林区吸烟、携带火种、随意丢弃烟头和乱扔垃圾。', NULL, '2022-09-23', '2024-05-10');
INSERT INTO `cmc_safe` VALUES ('1648881412237688834', '1648881412237688834', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：道路交通安全、森林防火、消防安全、新冠肺炎疫情、自然灾害、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行、像控点采集等，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）测区道路狭窄，测区路况较差，部分作业区域涉及土路，道路交通风险高，要求项目负责人加强道路交通监管，通过危险路段，先查看，谨慎通过，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务，并在作业前到所在区域治安大队或派出所报备；\n（5）操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20 m以外，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（6）无人机起降场地应选择在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故；\n（7）无人机作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人，每个架次须按规定填写《无人机飞行记录表》；\n（8）无人机电池充电时，须有人值守，使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（9）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（10）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度；\n（12）项目所有人员（包括临时用工）进入林区不得携带火种、不得在林区吸烟、违规用火，严格遵守当地政府森林（草原）防火规定。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '部分测区道路属于土路，雨天泥泞道路风险高，请重点关注，通过危险路段先查看，谨慎通过；作业区属于大熊猫国家保护区，严格遵守保护区各项规定，严禁在林区吸烟、携带火种、随意丢弃烟头和乱扔垃圾。', NULL, '2022-09-23', '2024-03-27');
INSERT INTO `cmc_safe` VALUES ('1648881412254466049', '1648881412254466049', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：道路交通安全、森林防火、消防安全、新冠肺炎疫情、自然灾害、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机飞行、像控点采集等，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）测区道路狭窄，测区路况较差，部分作业区域涉及土路，道路交通风险高，要求项目负责人加强道路交通监管，通过危险路段，先查看，谨慎通过，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务，并在作业前到所在区域治安大队或派出所报备；\n（5）操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20 m以外，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（6）无人机起降场地应选择在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故；\n（7）无人机作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人，每个架次须按规定填写《无人机飞行记录表》；\n（8）无人机电池充电时，须有人值守，使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（9）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（10）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度；\n（12）项目所有人员（包括临时用工）进入林区不得携带火种、不得在林区吸烟、违规用火，严格遵守当地政府森林（草原）防火规定。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '部分测区道路属于土路，雨天泥泞道路风险高，请重点关注，通过危险路段先查看，谨慎通过；作业区属于大熊猫国家保护区，严格遵守保护区各项规定，严禁在林区吸烟、携带火种、随意丢弃烟头和乱扔垃圾。', NULL, '2022-09-23', '2024-03-27');
INSERT INTO `cmc_safe` VALUES ('1648881412271243265', '1648881412271243265', 142, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：森林火灾、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、自然灾害、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及无人机航测作业、像控点采集、检查点测量等工作，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（3）要求项目驾驶员不疲劳驾驶（连续驾车4小时休息时间不得少于20分钟）、分心驾驶，保证充足睡眠。危险路段不冒险前行；\n（4）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（5）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20 m以外，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（8）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测；\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（10）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害；\n（11）项目在工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目由云南子公司承担，所有作业人员严格遵守子公司及总公司安全管理制度、测绘作业安全操作规程，测区涉及乡村道路、山区道路等危险路段，要求驾驶员谨慎驾驶，通过危险路段先查看确保安全后方可通行', NULL, '2022-09-18', '2024-01-31');
INSERT INTO `cmc_safe` VALUES ('1648881412296409090', '1648881412296409090', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：跨省长途行车风险、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、汛期自然灾害、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于山西沁水境内，本项目涉及跨省长途行车、无人机航测作业、像控点采集、检查点测量等工作，时下正值主汛期，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（3）项目进出场路途遥远，要求驾驶员不疲劳驾驶（连续驾车4小时休息时间不得少于20分钟）、分心驾驶，保证充足睡眠；\n（4）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（5）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（6）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20 m以外，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（8）夏季天气炎热，野外作业合理安排工作时间，工作中预防中暑，项目须配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩；\n（9）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（10）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，工作做好合理安排；\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目进出场路途遥远，要求驾驶员不得疲劳驾驶（连续驾车4小时休息时间不得低于20分钟）；无人机飞行前向相关单位（部门）做好报备，无人机起飞前对各部件2人交叉检查，严防螺旋桨伤人事故发生。', NULL, '2022-09-10', '2024-05-02');
INSERT INTO `cmc_safe` VALUES ('1648881412313186305', '1648881412313186305', 59, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：道路交通、森林火险、林权数据安全、火灾、触电、新冠肺炎疫情、摔伤、跌倒、动物伤害等风险。\n（三）针对隐患源制定的安全措施：\n（1）邻水县农村集体土地大比例尺图实测和确权登记发证项目（包二），时间较长，工作中涉及与当地政府和群众接触较多，做好沟通、协调、解释工作，避免产生矛盾；\n（2）作业区域属于乡村道路，弯多路窄，当地老乡道路交通意识相对较差，作业人员沿公路作业时做好防护措施，穿戴好反光背心，项目驾驶员选择合理车速，弯道提前鸣号，谨慎驾驶；\n（3）项目车辆做好维护保养，保持良好车况，不得病车上路，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理，驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入作业区时，小心狗、毒蜂等动物伤害；\n（5）做好测绘成果资料保密、保存工作，特别是确权登记类的项目，纸质版资料较多，存放时间长，安全风险较大，做好消防安全、防潮防腐措施，办公区及资料堆积区严禁吸烟，结合现场实际配置足够数量灭火器，确保测绘资料安全；\n（6）不违规记录、存储、复制和传递项目资料信息，严格遵守《中华人民共和国保守国家秘密法》、《中华人民共和国测绘成果管理条例》、《测绘地理信息管理工作国家秘密范围的规定》、《四川省测绘成果管理办法》、《四川省涉密测绘成果管理规定》和相关保密要求，知悉应当承担的保密义务和法律责任；\n（7）如需与相关方共同开展作业时，应签订安全生产管理协议，明确各自职责与义务，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（8）外业作业时做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理；\n（9）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（10）项目如需租用车辆，须签订租车协议，明确各自安全职责，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关；\n（11）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（12）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故；\n（13）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（14）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（15）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程；\n（16）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案（第三版）和属地政府防控制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目开始于2016年，方便项目管理补登，项目收尾期，办公地资料较多，消防安全风险高，请重点防范！', NULL, '2022-08-30', '2023-08-24');
INSERT INTO `cmc_safe` VALUES ('1648881412329963522', '1648881412329963522', 59, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：道路交通、森林火险、林权数据安全、火灾、触电、新冠肺炎疫情、摔伤、跌倒、动物伤害等风险。\n（三）针对隐患源制定的安全措施：\n（1）邻水县农村土地承包经营权确权登记外业调绘内业建库技术服务合同,时间较长，工作中涉及与当地政府和群众接触较多，做好沟通、协调、解释工作，避免产生矛盾；\n（2）作业区域属于乡村道路，弯多路窄，当地老乡道路交通意识相对较差，作业人员沿公路作业时做好防护措施，穿戴好反光背心，项目驾驶员选择合理车速，弯道提前鸣号，谨慎驾驶；\n（3）项目车辆做好维护保养，保持良好车况，不得病车上路，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理，驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入作业区时，小心狗、毒蜂等动物伤害；\n（5）做好测绘成果资料保密、保存工作，特别是确权登记类的项目，纸质版资料较多，存放时间长，安全风险较大，做好消防安全、防潮防腐措施，办公区及资料堆积区严禁吸烟，结合现场实际配置足够数量灭火器，确保测绘资料安全；\n（6）不违规记录、存储、复制和传递项目资料信息，严格遵守《中华人民共和国保守国家秘密法》、《中华人民共和国测绘成果管理条例》、《测绘地理信息管理工作国家秘密范围的规定》、《四川省测绘成果管理办法》、《四川省涉密测绘成果管理规定》和相关保密要求，知悉应当承担的保密义务和法律责任；\n（7）如需与相关方共同开展作业时，应签订安全生产管理协议，明确各自职责与义务，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（8）外业作业时做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理；\n（9）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（10）项目如需租用车辆，须签订租车协议，明确各自安全职责，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关；\n（11）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（12）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故；\n（13）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（14）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（15）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程；\n（16）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案（第三版）和属地政府防控制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目处于收尾阶段，办公地资料较多，消防安全风险突出，堆积资料区域严禁吸烟，配置灭火器。', NULL, '2022-08-30', '2024-02-23');
INSERT INTO `cmc_safe` VALUES ('1648881412346740737', '1648881412346740737', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：跨省长途行车风险、无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、汛期自然灾害、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于河北邢台境内，本项目涉及跨省长途行车、无人机航测作业、像控点采集、检查点测量等工作，时下正值主汛期，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（3）项目进出场路途遥远，要求驾驶员不疲劳驾驶（连续驾车4小时休息时间不得少于20分钟）、分心驾驶，保证充足睡眠；\n（4）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（5）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业时选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（6）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20 m以外，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（8）夏季天气炎热，野外作业合理安排工作时间，工作中预防中暑，项目须配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩；\n（9）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（10）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，工作做好合理安排；\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度，按相关要求做好行程报备和核酸检测。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '河北IE邢台项目进出场路途遥远，督促驾驶员不疲劳驾驶（连续驾车4小时休息时间不得少于20分钟），无人飞行作业严格遵守公司测绘作业安全操作规程，做好汛期极端天气外业工作安全管理，高温天气合理安排作业时间。', NULL, '2022-08-15', '2023-07-09');
INSERT INTO `cmc_safe` VALUES ('1648881412363517954', '1648881412363517954', 63, 63, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、防火、防盗、防狗咬等。 \n（二）针对隐患源制定的安全措施：\n（1）测站要远离主干道，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n（2）严禁在高压电线附近作业。\n（3）禁止烟头乱扔，注意作业区周围烟火情况。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）尊重少数民族习惯，搞好团结。\n（6）水上作业和水边作业必须穿载救生衣，进入工区必须佩戴安全帽。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-08-09', '2023-01-04');
INSERT INTO `cmc_safe` VALUES ('1648881412384489473', '1648881412384489473', 113, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：道路交通、森林火险、林权数据安全、火灾、触电、新冠肺炎疫情、摔伤、跌倒、动物伤害等风险。\n（三）针对隐患源制定的安全措施：\n（1）广元市自然资源局昭化区分局昭化区林权权籍补充调查服务采购项目作业时间到2023年6月30日，时间较长，工作中涉及与当地政府和群众接触较多，做好沟通、协调、解释工作，避免产生矛盾；\n（2）作业区域属于乡村道路，弯多路窄，当地老乡道路交通意识相对较差，作业人员沿公路作业时做好防护措施，穿戴好反光背心，项目驾驶员选择合理车速，弯道提前鸣号，谨慎驾驶；\n（3）项目车辆做好维护保养，保持良好车况，不得病车上路，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理，驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入作业区时，小心狗、毒蜂等动物伤害；\n（5）做好测绘成果资料保密、保存工作，特别是确权登记类的项目，纸质版资料较多，存放时间长，安全风险较大，做好消防安全、防潮防腐措施，办公区及资料堆积区严禁吸烟，结合现场实际配置足够数量灭火器，确保测绘资料安全；\n（6）不违规记录、存储、复制和传递项目资料信息，严格遵守《中华人民共和国保守国家秘密法》、《中华人民共和国测绘成果管理条例》、《测绘地理信息管理工作国家秘密范围的规定》、《四川省测绘成果管理办法》、《四川省涉密测绘成果管理规定》和相关保密要求，知悉应当承担的保密义务和法律责任；\n（7）如需与相关方共同开展作业时，应签订安全生产管理协议，明确各自职责与义务，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（8）外业作业时做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理；\n（9）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（10）项目如需租用车辆，须签订租车协议，明确各自安全职责，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关；\n（11）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（12）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故；\n（13）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（14）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（15）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程；\n（16）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案（第三版）和属地政府防控制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '工作中涉及与当地政府和群众接触较多，做好沟通、协调、解释工作，避免产生矛盾，不违规记录、存储、复制和传递项目资料信息，与相关方共同参与作业须签订安全管理协议，明确各自安全职责。', NULL, '2022-08-04', '2022-08-10');
INSERT INTO `cmc_safe` VALUES ('1648881412401266689', '1648881412401266689', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期地质灾害、气象灾害、森林火险、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区位于阿坝州金川县境内等，作业中涉及无人机飞行、像控点、检查点采集，请项目所有人员加强安全生产宣传教育，开展好班前安全教育活动，树立安全第一的思想，不断强化安全意识；\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准；\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素；\n（7）项目进出场路途遥远，要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行；\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度及测绘作业安全操作规程；\n（9）工作中严防摔伤、砸伤、滑倒，涉及在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施保证安全，对不能保证安全的区域，应绕道而行；\n（10）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定；\n（11）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，做好动物伤害；\n（12）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（13）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施；', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目外业由金川测量中心、激光技术中心等部门共同完成，工作中做好沟通协调，无人机飞行做好报备，飞行前对各固件进行两人交叉检查，进入主汛期做好防汛、防地质灾害防范措施。', NULL, '2022-07-27', '2024-05-02');
INSERT INTO `cmc_safe` VALUES ('1648881412422238210', '1648881412422238210', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：森林火险、淹溺、高处坠落、物体打击、消防安全、触电、新冠肺炎疫情、摔伤、跌倒、动物伤害等风险。\n（三）针对隐患源制定的安全措施：\n（1）严格遵守二滩电厂安全管理制度，按要求编制好项目安全管理、文明施工等措施，作业前按要求办理工作票，方可开展作业；\n（2）作业中涉及水电站区域，电器设备、电线较多，工作中不得随意触碰电气设备；\n（3）项目车辆做好日常维护保养，不得病车上路，驾驶员不得疲劳驾驶，分心驾驶，危险路段谨慎通行；\n（4）水上作业和临水边作业须全程穿戴好符合要求的救生衣，水上作业必须有2人以上方可进行，6级以上强风、大雨、雷电、浓雾天气禁止水上作业；\n（5）工作人员严禁在库内游泳、戏水，严禁在船上和工作时间内饮酒；\n（6）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故；\n（7）在作业过程中，保持场地整洁，做好现场文明施工及周围的环境卫生；\n（8）在搬运设备、材料过程中，做好防护，防止脱落砸伤人员；\n（9）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚；\n（10）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程；\n（12）项目如需租用船只开展作业，须签订租船协议，并报备公司综合事务部，租用船只的行驶证、检验合格证须在有效期内，并具备相关营运资格，船只驾驶员及船工须熟悉施测区域水情。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目如需租用船只开展作业，须签订租船协议，并报备公司综合事务部，租用船只的行驶证、检验合格证须在有效期内，并具备相关营运资格，船只驾驶员及船工须熟悉施测区域水情。水上、临水边作业须全程规范穿戴符合要求的救生衣。', NULL, '2022-07-27', '2023-07-17');
INSERT INTO `cmc_safe` VALUES ('1648881412443209730', '1648881412443209730', 95, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：水准测量安全风险、交通安全、消防安全、新冠肺炎疫情、汛期自然灾害、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及控制网建网土建、GNSS测量、水准测量等工作，时下正值主汛期，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）测区道路狭窄，道路交通风险高，特别是在水准测量中涉及占道测绘，须做好安全防护和提醒措施；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（5）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（6）在控制网土建工作中，如需临时用工，请严格遵守公司相关临时用工管理制度，工作前告知作业中安全风险和相关防护措施，工作中随时提醒安全注意事项；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（8）进入伏天，天气炎热，野外作业合理安排工作时间，工作中预防中暑，项目须配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩；\n（9）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（10）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，工作做好合理安排；\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目水准工作大（二等131公里、三等49公里），在施测中做好安全措施，特别是沿公路测量时提醒作业人员安全注意事项，确保作业安全，进入伏天，测区天气炎热，合理安排外业时间，避免发生中暑。', NULL, '2022-07-26', '2024-01-13');
INSERT INTO `cmc_safe` VALUES ('1648881412459986946', '1648881412459986946', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：控制网建网土建风险、水准测量安全风险、交通安全、消防安全、新冠肺炎疫情、汛期自然灾害、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于雅安市石棉县境内，本项目涉及控制网建网土建、边角网测绘、水准测量等工作，时下正值主汛期，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）测区道路狭窄，矿山运输车辆较多，道路交通风险高，特别是在水准测量中涉及占道测绘，须做好安全防护和提醒措施；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（5）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（6）在控制网土建工作中，如需临时用工，请严格遵守公司相关临时用工管理制度，工作前告知作业中安全风险和相关防护措施，工作中随时提醒安全注意事项；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（8）进入伏天，天气炎热，野外作业合理安排工作时间，工作中预防中暑，项目须配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩；\n（9）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（10）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，工作做好合理安排；\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '控制网土建中涉及临时用工请严格遵守公司临时用工管理制度，水准测量安全风险高，特别是占道测绘时须做好安全管理措施。', NULL, '2022-07-26', '2023-06-20');
INSERT INTO `cmc_safe` VALUES ('1648881412476764161', '1648881412476764161', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期地质灾害、气象灾害、高原病、森林火险、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区位于甘孜州境内，作业中涉及无人机飞行、控制测量、像控点测量和检查点采集等，请项目所有人员进场前做好身体健康筛查，加强安全生产宣传教育，开展好班前安全教育活动，树立安全第一的思想，不断强化安全意识；\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准，无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（4）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（5）目前正值“七下八上”防洪度汛、防地质灾害关键期，请项目人员提高防范意识；\n（6）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行；\n（7）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度及测绘作业安全操作规程；\n（8）工作中严防摔伤、砸伤、滑倒，涉及在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施保证安全，对不能保证安全的区域，应绕道而行；\n（9）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定；\n（10）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，做好动物伤害；\n（11）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（12）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施；', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '目前正值“七下八上”防洪度汛、防地质灾害关键期，请项目人员提高防范意识，所有测绘作业须严格遵守安全操作规程。', NULL, '2022-07-27', '2023-02-14');
INSERT INTO `cmc_safe` VALUES ('1648881412493541377', '1648881412493541377', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：控制网建网土建风险、水准测量安全风险、交通安全、消防安全、新冠肺炎疫情、汛期自然灾害、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于雅安市石棉县境内，本项目涉及控制网建网土建、边角网测绘、水准测量等工作，时下正值主汛期，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）测区道路狭窄，矿山运输车辆较多，道路交通风险高，特别是在水准测量中涉及占道测绘，须做好安全防护和提醒措施；\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（4）作业区域道路涉及乡村道路，当地老乡安全交通意识差，请提醒驾驶员选择合理车速，不分心驾驶，确保交通安全；\n（5）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（6）在控制网土建工作中，如需临时用工，请严格遵守公司相关临时用工管理制度，工作前告知作业中安全风险和相关防护措施，工作中随时提醒安全注意事项；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（8）进入伏天，天气炎热，野外作业合理安排工作时间，工作中预防中暑，项目须配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩；\n（9）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（10）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，工作做好合理安排；\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '控制网土建中涉及临时用工请严格遵守公司临时用工管理制度，水准测量安全风险高，特别是占道测绘时须做好安全管理措施。', NULL, '2022-07-26', '2023-06-20');
INSERT INTO `cmc_safe` VALUES ('1648881412514512898', '1648881412514512898', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、动物伤害、新冠肺炎疫情、交通安全、消防安全、汛期自然灾害、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于广西桂林市资源县境内，本项目涉及无人机航测作业、像控点采集、检查点测量等工作，时下正值主汛期，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（3）项目进出场路途遥远，要求驾驶员不疲劳驾驶、分心驾驶，保证充足睡眠；\n（4）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（5）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（7）广西天气炎热，野外作业合理安排工作时间，工作中预防中暑，项目须配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩\n（8）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（9）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，工作做好合理安排；\n（10）要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外;\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '广西天气炎热，工作中注意防暑，测区树林茂密，夏季毒蜂、毒蛇较多，请一定注意防范，进出场路途遥远，提醒驾驶员不疲劳驾驶，工作中不违章指挥，所有作业须按相关规程规范开展，无人机航测、控制点测量等须严格遵守公司测绘安全操作规程。', NULL, '2022-07-20', '2023-07-09');
INSERT INTO `cmc_safe` VALUES ('1648881412535484418', '1648881412535484418', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：新冠肺炎疫情、交通安全、消防安全、汛期自然灾害、界桩搬运中摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于新疆博州境内，本项目涉及界桩制作、搬运、安装、施测等工作，时下正值主汛期，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（3）项目进出场路途遥远，要求驾驶员不疲劳驾驶、分心驾驶，保证充足睡眠；\n（4）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（5）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（7）在界桩制作、搬运、安装、施测中安全风险高，严防作业中摔伤、滑倒事故发生；\n（8）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（9）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，工作做好合理安排；\n（10）要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（11）如需与相关方共同开展作业时，应签订安全生产管理协议，明确各自职责与义务，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '在界桩制作、搬运、安装、施测中安全风险高，严防作业中摔伤、滑倒事故发生，如需与相关方共同开展作业时，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导。', NULL, '2022-07-18', '2023-05-04');
INSERT INTO `cmc_safe` VALUES ('1648881412552261633', '1648881412552261633', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：无人机飞行风险、新冠肺炎疫情、交通安全、消防安全、汛期自然灾害、摔伤，滑到等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于新疆博州境内，本项目涉及无人机航测作业、像控点采集、检查点测量等工作，时下正值主汛期，安全风险较高，请项目负责人高度重视生产安全，提高安全意识；\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；\n（3）项目进出场路途遥远，要求驾驶员不疲劳驾驶、分心驾驶，保证充足睡眠；\n（4）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（5）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（7）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩\n（8）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（9）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，工作做好合理安排；\n（10）要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外;\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目地处新疆博州境内，进出场路途遥远，要求驾驶员不分心驾驶、疲劳驾驶，保证车辆状况良好，无人机航测作业须严格遵守公司测绘作业安全操作规程。', NULL, '2022-07-18', '2023-07-24');
INSERT INTO `cmc_safe` VALUES ('1648881412573233153', '1648881412573233153', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期地质灾害、气象灾害、高原病、森林火险、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区位于甘孜州雅江县两河口水电站工区，作业中涉及无人机飞行、控制测量、像控点测量和检查点采集等，请项目所有人员进场前做好身体健康筛查，加强安全生产宣传教育，开展好班前安全教育活动，树立安全第一的思想，不断强化安全意识；\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准；\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（6）本项目外业数据采集由两河口测量中心承担，要求中心驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行；\n（7）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度及测绘作业安全操作规程；\n（8）工作中严防摔伤、砸伤、滑倒，涉及在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施保证安全，对不能保证安全的区域，应绕道而行；\n（9）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定；\n（10）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，做好动物伤害；\n（11）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（12）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区位于两河口水电站施工区内，作业中严格遵守建设单位（业主）安全管理规定，不冒险作业，临沟边、坎边作业做好安全防护。', NULL, '2022-07-15', '2024-05-02');
INSERT INTO `cmc_safe` VALUES ('1648881412594204674', '1648881412594204674', 94, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期地质灾害、气象灾害、森林火险、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区位于攀枝花境内，作业中涉及无人机飞行、控制测量、像控点测量和检查点采集等，请项目负责人加强安全生产宣传教育，开展好班前安全教育活动，树立安全第一的思想，不断强化安全意识；\n（2）无人机飞行前须到相关部门（单位）进行报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准；\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（4）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（5）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（6）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（7）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业；\n（8）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避；\n（10）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（11）攀枝花天气炎热，野外工作中预防中暑，项目须配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩；\n（12）目前处于肺炎疫情防控期，，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发热、咳嗽等症状规范就医；\n（13）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '攀枝花地区天气炎热，野外作业中严防从业人员发生中暑，不得将酒精、打火机等易燃物放置车内，无人机飞行须严格遵守公司测绘作业安全操作规程和相关规定。', NULL, '2022-07-15', '2024-01-08');
INSERT INTO `cmc_safe` VALUES ('1648881412610981889', '1648881412610981889', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期地质灾害、气象灾害、高原病、森林火险、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区位于甘孜州境内，作业区域海拔超过4000米，作业中涉及无人机飞行、控制测量、像控点测量和检查点采集等，请项目所有人员进场前做好身体健康筛查，加强安全生产宣传教育，开展好班前安全教育活动，树立安全第一的思想，不断强化安全意识；\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准；\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素；\n（7）项目进出场路途遥远，要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行；\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度及测绘作业安全操作规程；\n（9）工作中严防摔伤、砸伤、滑倒，涉及在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施保证安全，对不能保证安全的区域，应绕道而行；\n（10）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定；\n（11）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，做好动物伤害；\n（12）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（13）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施；', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '宗西抽水蓄能电站地形图测绘项目海拔较高，须做好作业中人员健康监护，无人机飞行须遵守安全操作规程。', NULL, '2022-07-13', '2022-08-12');
INSERT INTO `cmc_safe` VALUES ('1648881412631953410', '1648881412631953410', 113, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期地质灾害、气象灾害、高原病、森林火险、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区位于甘孜州九龙县，作业中涉及无人机飞行、控制测量、像控点测量和检查点采集等，请项目所有人员进场前做好身体健康筛查，加强安全生产宣传教育，开展好班前安全教育活动，树立安全第一的思想，不断强化安全意识；\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准；\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素；\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行；\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度及测绘作业安全操作规程；\n（10）工作中严防摔伤、砸伤、滑倒，涉及在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施保证安全，对不能保证安全的区域，应绕道而行；\n（11）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定；\n（12）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，做好动物伤害；\n（13）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（14）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施；\n（15）在少数民族地区工作时，应尊重民族风俗和生活习惯，在社会治安差、人烟稀少的地区工作，应事先和当地政府及有关部门联系，取得当地政府和公安机关的支持。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '张牙沟测区道路高差较大，路况较差，请提醒驾驶员谨慎驾驶，汛期作业提前关注天气情况，严防边坡垮塌等地质灾害。', NULL, '2022-07-13', '2023-07-12');
INSERT INTO `cmc_safe` VALUES ('1648881412648730625', '1648881412648730625', 84, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期地质灾害、气象灾害、高原病、森林火险、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区位于甘孜州新都桥镇，作业中涉及无人机飞行、控制测量、像控点测量和检查点采集等，请项目所有人员进场前做好身体健康筛查，加强安全生产宣传教育，开展好班前安全教育活动，树立安全第一的思想，不断强化安全意识；\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准；\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（6）本项目外业数据采集由两河口测量中心承担，要求中心驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行；\n（7）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度及测绘作业安全操作规程；\n（8）工作中严防摔伤、砸伤、滑倒，涉及在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施保证安全，对不能保证安全的区域，应绕道而行；\n（9）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定；\n（10）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，做好动物伤害；\n（11）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（12）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目外业测绘工作由两河口测量中心承担，请项目负责督促无人机飞行须严格遵守相关的安全操作规程。', NULL, '2022-07-13', '2023-02-03');
INSERT INTO `cmc_safe` VALUES ('1648881412665507842', '1648881412665507842', 94, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：临水边作业滑到和摔伤、汛期地质灾害、气象灾害、森林火险、消防安全、触电、交通风险、无人机飞行安全风险、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区位于石棉县南桠河和松林河，作业中涉及无人机飞行、控制测量、像控点测量和检查点采集、水下地形测量等，请项目所有人员加强安全生产宣传教育，开展好班前安全教育活动，树立安全第一的思想，不断强化安全意识；汛期地质灾害、气象灾害、森林火险、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等；\n（2）南桠河和松林河作业时，做好临沟边、坎边安全防护措施，严防高处坠落事故发生；\n（3）目前处于主汛期，石棉气温较高，请做好外业时间合理安排，避免作业人员中暑；\n（4）外业项目在工作前做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理；\n（5）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（7）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，工作做好合理安排；\n（8）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（9）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '水下地形测量和断面测量须做好防滑、防高处坠落等事故发生，石棉天气炎热，合理安排外业测绘时间，做好防中暑措施。本项目租用车辆开展作业，须签订租车协议，对租用车辆车况做全面了解，避免病车上路。', NULL, '2022-07-13', '2023-09-11');
INSERT INTO `cmc_safe` VALUES ('1648881412682285058', '1648881412682285058', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的主要安全隐患：无人机飞行安全风险、森林火险、消防安全、交通安全、边坡坠物（落石）、防盗、动物伤害、摔伤、砸伤等。\n（三）针对安全风险制定的安全措施：\n（1）本次外业测绘中涉及无人机等航飞作业、控制测绘，测区属于高山峡谷、要求项目负责人及参与人员高度重视安全生产工作，全面提升参与员工安全意识；\n（2）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务。没有按照规定申请空域时，只能使用微型无人机（7kg以下）在高度120m以下空域进行视距内（斜距500m）作业，并在作业前到所在区域治安大队或派出所报备；\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（4）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备；\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（6）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，工作做好合理安排；\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（8）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（9）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素；\n（10）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒；\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度；\n（12）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害；\n（13）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-06-28', '2023-06-29');
INSERT INTO `cmc_safe` VALUES ('1648881412699062273', '1648881412699062273', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高原病、森林火险、消防安全、触电、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区位于西藏地区，作业中涉及无人机飞行、控制测量、像控点和检查点采集等，项目安全风险较高，请项目所有人员进场前做好身体健康筛查，加强安全生产宣传教育，树立安全第一的思想，不断强化安全意识。\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准。\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）项目进出场路途遥远，要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度及测绘作业安全操作规程。\n（10）工作中严防摔伤、砸伤、滑倒，涉及在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施保证安全，对不能保证安全的区域，应绕道而行。\n（11）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（12）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动物伤害。\n（13）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。\n（14）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施。\n（15）在少数民族地区工作时，应尊重民族风俗和生活习惯，在社会治安差、人烟稀少的地区工作，应事先和当地政府及有关部门联系，取得当地政府和公安机关的支持。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作，高原测绘合理安排作业时间，项目驾驶员在试用期，加强安全监管。', NULL, '2022-06-28', '2022-07-04');
INSERT INTO `cmc_safe` VALUES ('1648881412715839489', '1648881412715839489', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：汛期自然灾害、消防安全、交通安全、作业中摔伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目存在于合作单位共同完成作业，相关单位需具备此项目测绘作业资格，作业前需签订安全管理协议，协议中明确相关方安全职责和义务，项目管理人员加强对相关方安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（2）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育；\n（3）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（4）野外作业要注意毒蛇、毒蜂等危害动物，携带必要的防护用品和药品；\n（5）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路；\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（7）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；\n（8）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目存在于合作单位共同完成作业，相关单位需具备此项目测绘作业资格，作业前需签订安全管理协议，协议中明确相关方安全职责和义务。', NULL, '2022-06-28', '2024-05-02');
INSERT INTO `cmc_safe` VALUES ('1648881412736811010', '1648881412736811010', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：森林火险、消防安全、触电、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）项目位于广西南宁等地，进出场路途遥远，作业涉及无人机激光航飞，控制测量等，作业中安全风险相对较高，请项目参与人员高度重视生产安全，杜绝违章作业，严格遵守公司安全管理制度和安全操作规程。\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准。\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及与相关方共同开展作业，工作前须签订安全管理协议，明确相关责任。', NULL, '2022-06-28', '2023-02-10');
INSERT INTO `cmc_safe` VALUES ('1648881412753588225', '1648881412753588225', 63, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期地质灾害、气象灾害、高原病、森林火险、消防安全、触电、交通风险、作业中摔伤砸伤、新冠肺炎疫情等。\n（三）针对隐患源制定的安全措施：\n（1）本项目三块地形图测绘工作面道路交通条件较差，边坡落石情况严重，安全管理中请做重点关注；\n（2）当前正值主汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；\n（3）外业项目在工作前做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理；\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件；\n（5）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩；\n（6）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（7）进入工地，不得携带火种，严禁在工地现场吸烟。作业中佩戴好安全防护用具，与施工机械保持安全距离。进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（8）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头；\n（9）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '所有作业严格遵守公司测绘测绘作业安全操作规程，测绘区域边坡落石严重，请做好防范和提醒。', NULL, '2022-06-20', '2023-06-26');
INSERT INTO `cmc_safe` VALUES ('1648881412774559745', '1648881412774559745', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期地质灾害、气象灾害、高原病、森林火险、消防安全、触电、交通风险、作业中摔伤砸伤、新冠肺炎疫情等。\n（三）针对隐患源制定的安全措施：\n（1）施工控制网建网、施测过程需要临时用工时，用工前需每人购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥；\n（2）当前正值主汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；\n（3）外业项目在工作前做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理；\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件；\n（5）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩；\n（6）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（7）进入工地，不得携带火种，严禁在工地现场吸烟。作业中佩戴好安全防护用具，与施工机械保持安全距离。进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故；\n（8）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头；\n（9）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '作业区域涉及建设施工区域，严格遵守相关单位安全管理规定，进入主汛期，作业时严防边坡落石等地质灾害发生', NULL, '2022-06-17', '2023-11-16');
INSERT INTO `cmc_safe` VALUES ('1648881412795531265', '1648881412795531265', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人，', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目只涉及内业资料处理，安全风险较低，请做好日常办公室安全管理，人离开办公室关闭电源', NULL, '2022-06-17', '2024-05-02');
INSERT INTO `cmc_safe` VALUES ('1648881412812308481', '1648881412812308481', 142, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期地质灾害、气象灾害、森林火险、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区位于凉山州，作业中涉及无人机飞行、控制测量、像控点测量和检查点采集等，请项目所有人员加强安全生产宣传教育，开展好班前安全教育活动，树立安全第一的思想，不断强化安全意识；\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准；\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（6）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素；\n（8）驾乘人员遵章守纪。驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度及测绘作业安全操作规程；\n（10）工作中严防摔伤、砸伤、滑倒，涉及在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施保证安全，对不能保证安全的区域，应绕道而行；\n（11）提升安全意识，预防意外伤害。外业工作要预防中暑和晒伤，配备防暑药品，做好新冠肺炎疫情防控，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物。外业工作中配备安全设备和药品，预防犬、毒蜂、蛇等动物伤害；\n（12）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，做好动物伤害；\n（13）当前正值主汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；\n（14）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施；\n（15）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-06-14', '2024-01-26');
INSERT INTO `cmc_safe` VALUES ('1648881412829085697', '1648881412829085697', 142, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期地质灾害、气象灾害、森林火险、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区位于凉山州，作业中涉及无人机飞行、控制测量、像控点测量和检查点采集等，请项目所有人员加强安全生产宣传教育，开展好班前安全教育活动，树立安全第一的思想，不断强化安全意识；\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准；\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（6）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素；\n（8）驾乘人员遵章守纪。驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度及测绘作业安全操作规程；\n（10）工作中严防摔伤、砸伤、滑倒，涉及在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施保证安全，对不能保证安全的区域，应绕道而行；\n（11）提升安全意识，预防意外伤害。外业工作要预防中暑和晒伤，配备防暑药品，做好新冠肺炎疫情防控，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物。外业工作中配备安全设备和药品，预防犬、毒蜂、蛇等动物伤害；\n（12）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，做好动物伤害；\n（13）当前正值主汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息，极端天气，合理安排外业作业；\n（14）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施；\n（15）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '无人机飞行前做好相关报备工作后，方可开展作业，目前进入主汛期，多关注测区气象信息，合理安排外业测量作业，夏季气温较高，严防因高温导致作业人员中暑情况发生。', NULL, '2022-06-14', '2023-03-22');
INSERT INTO `cmc_safe` VALUES ('1648881412845862913', '1648881412845862913', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期地质灾害、气象灾害、高原病、森林火险、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区位于甘孜州理塘县，作业区域海拔超过4000米，作业中涉及无人机飞行、控制测量、像控点测量和检查点采集等，请项目所有人员进场前做好身体健康筛查，加强安全生产宣传教育，开展好班前安全教育活动，树立安全第一的思想，不断强化安全意识；\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准；\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故；\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒；\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素；\n（8）项目进出场路途遥远，要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行；\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度及测绘作业安全操作规程；\n（10）工作中严防摔伤、砸伤、滑倒，涉及在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施保证安全，对不能保证安全的区域，应绕道而行；\n（11）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定；\n（12）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，做好动物伤害；\n（13）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作；\n（14）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施；\n（15）在少数民族地区工作时，应尊重民族风俗和生活习惯，在社会治安差、人烟稀少的地区工作，应事先和当地政府及有关部门联系，取得当地政府和公安机关的支持。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '作业区域海拔较高，进场前做好人员身体健康筛查，无人机飞行须严格遵守公司测绘作业安全操作规程开展工作。', NULL, '2022-06-13', '2024-05-02');
INSERT INTO `cmc_safe` VALUES ('1648881412875223041', '1648881412875223041', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：相关方参与作业风险、汛期自然灾害风险、消防安全、触电、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）项目位于山西境内，作业涉及无人机激光航飞，控制测量等，作业中安全风险相对较高，请项目参与人员高度重视生产安全，杜绝违章作业，严格遵守公司安全管理制度和安全操作规程。\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准。\n（3）操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）本项目涉及与相关方完成，应签订安全生产承诺书和测绘资料保密协议，项目负责人对相关方安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。\n（13）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（14）要求驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。\n（15）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。\n（16）与合作单位共同开展作业时，应签订安全生产管理协议和测绘资料保密协议，项目负责人对相关方安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及与相关方开展作业，作业前签订安全管理协议，明确各自安全职责，无人机飞行作业前须到相关部门报备，得到飞行许可方可开展作业，进出场路途遥远，要求驾驶员不疲劳驾驶、分心驾驶。', NULL, '2022-06-08', '2023-02-10');
INSERT INTO `cmc_safe` VALUES ('1648881412892000257', '1648881412892000257', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高原病、森林火险、消防安全、触电、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区位于西藏昌都地区，临时驻地和作业区域海拔超过4000米，作业中涉及无人机飞行、控制测量、像控点和检查点采集等，项目安全风险较高，请项目所有人员进场前做好身体健康筛查，加强安全生产宣传教育，树立安全第一的思想，不断强化安全意识。\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准。\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）项目进出场路途遥远，要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度及测绘作业安全操作规程。\n（10）工作中严防摔伤、砸伤、滑倒，涉及在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施保证安全，对不能保证安全的区域，应绕道而行。\n（11）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（12）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动物伤害。\n（13）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。\n（14）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施。\n（15）在少数民族地区工作时，应尊重民族风俗和生活习惯，在社会治安差、人烟稀少的地区工作，应事先和当地政府及有关部门联系，取得当地政府和公安机关的支持。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目驻地和作业区域海拔都超过4000米，进场前请做好人员健康筛查，进出场路途遥远，提醒驾驶员不疲劳驾驶，分心驾驶，无人机飞行前做好各固件检查和相关报备工作。', NULL, '2022-06-09', '2024-06-12');
INSERT INTO `cmc_safe` VALUES ('1648881412912971777', '1648881412912971777', 113, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：城区测量安全风险、新冠肺炎疫情、交通安全、消防安全等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于什邡城区，城区开展测绘工作道路交通安全风险较高，项目参与人员在思想上高度重视，提高安全意识。\n（2）项目涉及和相关方开展作业，须签订安全管理协议，明确相关方安全职责，工作中开展经常性安全监督检查，并做好相关记录。\n（3）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（5）目前处于肺炎疫情防控期，严格遵守属地政府疫情防控规定。\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素。\n（7）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。\n（8）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目涉及在什邡城区开展作业，道路交通安全风险高，要求全员穿戴好反光背心，做好安全防护和警示工作，和相关方开展作业须先签订安全管理协议，做好过程中安全监督管理，发现问题须及时整改和完善。', NULL, '2022-06-08', '2023-06-30');
INSERT INTO `cmc_safe` VALUES ('1648881412929748993', '1648881412929748993', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：新冠肺炎疫情、交通安全、消防安全、雨季洪水等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于雅安市石棉县，属于高山峡谷地带，目前处于汛期，外业测绘工作安全风险高，项目参与人员在思想上高度重视，提高安全意识。\n（2）当前正值每年汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，工作做好合理安排。\n（3）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。\n（4）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（5）目前处于肺炎疫情防控期，严格遵守属地政府疫情防控规定。\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素。\n（7）本项目涉及在产业园区域开展测量工作，严格遵守其安全管理规定，做好沟通协调工作。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。\n（9）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及在石棉县碳酸钙复合新材料产业园开展测量工作，作业中严格遵守其安全规定，做好沟通协调工作。', NULL, '2022-06-08', '2023-07-31');
INSERT INTO `cmc_safe` VALUES ('1648881412946526209', '1648881412946526209', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：森林火险、消防安全、高处坠落、触电、动物伤害、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于甘孜州，外业测绘中涉及无人机等航飞作业、控制测绘，测区属于高山峡谷、要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务。没有按照规定申请空域时，只能使用微型无人机（7kg以下）在高度120m以下空域进行视距内（斜距500m）作业，并在作业前到所在区域治安大队或派出所报备。\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（4）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备。\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（6）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁在自然河段开展水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。\n（7）驾乘人员遵章守纪。驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生\n（8）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（9）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（10）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（13）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '进入主汛期，工作中严防边坡落石等地质灾害，无人机飞行前做好螺旋桨等各固件2人交叉检查。', NULL, '2022-06-03', '2023-09-13');
INSERT INTO `cmc_safe` VALUES ('1648881412963303425', '1648881412963303425', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：边坡落石、高处坠落、消防安全、触电、汛期极端天气、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）项目在广西境内，测绘作业涉及控制测量、公路测量、目前正值主汛期，外业测绘安全风险较高，请项目参与人员高度重视生产安全，提升全员安全意识。\n（2）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因。\n（3）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（4）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（7）项目进出场路途遥远，要求驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶，外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度。\n（9）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。\n（10）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（12）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，我们要多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理作业安排。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目进出场路途遥远，请驾驶员不疲劳驾驶、分心驾驶，危险路段先查看，确保安全前提下谨慎通行，目前进入主汛期，作业前关注测区气象、交通等信息，极端天气合理安排作业时间，广西天气炎热，工作中严防中暑等发生。', NULL, '2022-06-03', '2024-03-12');
INSERT INTO `cmc_safe` VALUES ('1648881413009440769', '1648881413009440769', 50, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）坐标转换前外业数据采集严格遵守测绘作业安全操作规程，不违章作业、违章指挥，盲目冒进。\n（2）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（3）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（6）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（7）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人.', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '坐标转换前外业数据采集严格遵守测绘作业安全操作规程，不违章作业、违章指挥，盲目冒进', NULL, '2022-05-27', '2023-07-06');
INSERT INTO `cmc_safe` VALUES ('1648881413030412290', '1648881413030412290', 50, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人.', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-05-27', '2023-07-06');
INSERT INTO `cmc_safe` VALUES ('1648881413051383810', '1648881413051383810', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：消防安全、触电、城区道路交通风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）在人、车流量大的城区作业时，应穿着色彩醒目的安全警示反光马夹（背心），必要时应设置安全警示标志牌（墩），并安排专人担任安全警戒员.。\n（2）本次项目外业测绘中涉及城区测绘作业，控制测绘，要求项目负责人及参与人员高度重视安全生产工作。\n（3）在人、车流量大的城区作业时，应穿着色彩醒目的安全警示反光马夹（背心），必要时应设置安全警示标志牌（墩），并安排专人担任安全警戒员。\n（4）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（5）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度HE 操作规程。\n（6）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '在人、车流量大的城区作业时，应穿着色彩醒目的安全警示反光马夹（背心），必要时应设置安全警示标志牌（墩），并安排专人担任安全警戒员', NULL, '2022-05-27', '2023-07-08');
INSERT INTO `cmc_safe` VALUES ('1648881413072355329', '1648881413072355329', 20, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期自然灾害风险、消防安全、触电、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）项目位于浙江宁海地区，作业涉及无人机激光航飞，控制测量等，作业中安全风险相对较高，请项目参与人员高度重视生产安全，杜绝违章作业，严格遵守公司安全管理制度和安全操作规程。\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准。\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）本项目涉及与相关方完成，应签订安全生产承诺书和测绘资料保密协议，项目负责人对相关方安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及和相关方开展作业，须签订安全管理协议，明确各自职责，加强作业过程中安全检查，发现问题及时提出整改措施', NULL, '2022-05-27', '2023-08-04');
INSERT INTO `cmc_safe` VALUES ('1648881413093326850', '1648881413093326850', 113, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：淹溺、交通安全、消防安全、森林防火、边坡落石、摔伤、砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及水下地形测量，本项目严禁租用机动船或使用皮划艇用于涉水作业，水边点测量尽可能避免人工水边立尺，所有临水边测绘作业人员需穿戴好符合要求地救生衣，无人船充电须留人值守。\n（2）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。测区有灾害性天气预警，合理安排作业时间。\n（3）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（4）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（5）进一步落实安全生产责任制，坚持贯彻“安全第一、预防为主、综合治理”的方针，坚持“管生产必须管安全”的原则。强化组织机构，落实安全生产奖惩制度，将安全生产责任落实到人。\n（6）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（7）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '临水边测绘作业人员穿戴好符合要求地救生衣，进入主汛期，极端天气较多，合理安排作业时间。', NULL, '2022-05-23', '2023-06-28');
INSERT INTO `cmc_safe` VALUES ('1648881413114298369', '1648881413114298369', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的安全隐患：溺水、交通安全、边坡落石坠物、消防安全、摔伤、砸伤、无人机飞行安全风险等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测绘工作在铜街子和龚嘴水电站区域，作业前须和相关单位取得联系，办理工作票，并严格遵守其安全管理规章制度。\n（2）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等。\n（3）工作现场禁止吸烟，野外作业禁止携带火种。\n（4）大风、雷电、暴雨等极端天气恶劣天气时禁止作业。\n（5）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（6）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，特别是无人船和无人机充电时要严防电器火灾事故。\n（7）作业前须办理相关飞行许可，方可开展无人机飞行作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（8）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，我们要多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本次测绘工作在铜街子和龚嘴水电站区域，作业前须和相关单位取得联系，办理工作票，并严格遵守其安全管理规章制度，无人机飞行前须办理飞行许可方可开展工作', NULL, '2022-05-19', '2023-07-09');
INSERT INTO `cmc_safe` VALUES ('1648881413131075586', '1648881413131075586', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：溺水、森林火险、高处坠落、机械伤害、消防安全、触电、新冠肺炎疫情、高原反应（病）、摔伤、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守国网西藏电力有限公司拉萨发电公司及下属公司（电厂）安全管理制度，按要求编制好项目安全管理、文明施工等措施。\n（2）所有作业人员须穿戴好符合要求的救生衣，租用的船只应满足平稳性、安全性要求，并具有营业许可证，雇用的船工应持证上岗并熟悉施测区域水情。\n（3）作业中涉及水电站区域，电器设备、电线较多，工作中不得随意触碰电气设备。\n（4）项目车辆做好日常维护保养，不得病车上路，驾驶员不得疲劳驾驶，分心驾驶，危险路段谨慎通行。\n（5）提前关注、了解测区气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和班前安全活动。\n（6）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（7）项目地处高原地区，进场前对参与人员做好健康筛查，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（8）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程。\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（12）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严格遵守国网西藏电力有限公司拉萨发电公司及下属公司（电厂）安全管理制度，按要求编制好项目安全管理、文明施工等措施；水下地形测量中作业人员须穿戴好符合要求的救生衣，租用的船只应满足平稳性、安全性要求，并具有营业许可证，雇用的船工应持证上岗并熟悉施测区域水情。', NULL, '2022-05-17', '2023-06-30');
INSERT INTO `cmc_safe` VALUES ('1648881413147852802', '1648881413147852802', 94, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）在实物指标配合调查中做好与相关方沟通协调，避免与当地老百姓产生矛盾。\n（2）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（3）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾。\n（4）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路。\n（5）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，要多关注测区的天气预报、预警，特别是预警信息。灾害性天气预警，合理安排外业工作。\n（6）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩.\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、莽撞、心急、烦躁、赌气、自满等不安全心理因素。\n（8）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（9）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '在配合调查中做好与相关方沟通协调，避免与当地老百姓产生矛盾。', NULL, '2022-05-12', '2023-09-11');
INSERT INTO `cmc_safe` VALUES ('1648881413164630018', '1648881413164630018', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：森林火险、消防安全、触电、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作.\n（2）本次项目外业测绘中涉及无人机等航飞作业，控制测绘，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（3）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准。\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度HE 操作规程。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动物伤害。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '做好汛期极端天气外业测绘工作合理安排，无人机航飞作业须严格遵守公司制定的安全操作规程开展作业', NULL, '2022-05-12', '2023-07-31');
INSERT INTO `cmc_safe` VALUES ('1648881413181407233', '1648881413181407233', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：森林火险、消防安全、触电、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）项目位于广东梅县等地，进出场路途遥远，作业涉及无人机激光航飞，控制测量等，作业中安全风险相对较高，请项目参与人员高度重视生产安全，杜绝违章作业，严格遵守公司安全管理制度和安全操作规程。\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准。\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目进出场路途遥远，要求驾驶员不疲劳驾驶、分心驾驶，作业涉及无人机激光航测，控制测量等，作业中安全风险相对较高，请项目参与人员高度重视生产安全，杜绝违章作业，严格遵守公司安全管理制度和安全操作规程', NULL, '2022-05-07', '2023-06-27');
INSERT INTO `cmc_safe` VALUES ('1648881413193990145', '1648881413193990145', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）在实物指标配合调查中做好与相关方沟通协调，避免与当地老百姓产生矛盾。\n（2）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（3）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾。\n（4）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路。\n（5）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，要多关注测区的天气预报、预警，特别是预警信息。灾害性天气预警，合理安排外业工作。\n（6）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩.\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、莽撞、心急、烦躁、赌气、自满等不安全心理因素。\n（8）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（9）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度和安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '实物指标配合调查中做好与相关方沟通协调，避免与当地老百姓产生矛盾；遵守公司制定的测绘作业安全操作规程。', NULL, '2022-05-06', '2022-05-23');
INSERT INTO `cmc_safe` VALUES ('1648881413210767362', '1648881413210767362', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：相关方安全管理风险、无人机飞行安全风险、森林火险、消防安全、交通风险、边坡坠物（落石）、摔伤、砸伤等\n（1）本项目涉及控制测量、无人机飞行，存在于合作单位开展作业，与相关方开展作业，项目管理人员加强相关方安全监管。\n（2）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务，没有按照规定申请空域时，只能使用微型无人机（7 kg以下）在高度120 m以下空域进行视距内（斜距500 m）作业，并在作业前到所在区域治安大队或派出所报备。\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20 m以外，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（4）无人机起降场地应选择在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。\n（5）无人机作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人，每个架次须按规定填写《无人机飞行记录表》。\n（6）无人机电池充电时，须有人值守，使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故\n（7）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育。\n（8）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（9）与合作单位共同开展作业时，应签订安全生产管理协议和测绘资料保密协议，项目负责人对相关方安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（11）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（12）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及与相关方共同开展作业，项目开始前签订安全管理协议，项目管理人员加强合作单位安全监管，无人飞行须到相关部门报备后方可开展作业。', NULL, '2022-04-26', '2022-08-10');
INSERT INTO `cmc_safe` VALUES ('1648881413227544578', '1648881413227544578', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：无人机飞行安全风险、森林火险、消防安全、交通风险、边坡坠物（落石）、摔伤、砸伤等\n（1）施测区域位于阿坝州理县境内，测区涉及运行中的水电站，参与人员严格遵守电厂安全管理规定。\n（2）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务，没有按照规定申请空域时，只能使用微型无人机（7 kg以下）在高度120 m以下空域进行视距内（斜距500 m）作业，并在作业前到所在区域治安大队或派出所报备。\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20 m以外，飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（4）无人机起降场地应选择在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。\n（5）无人机作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人，每个架次须按规定填写《无人机飞行记录表》。\n（6）无人机电池充电时，须有人值守，使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故\n（7）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育。\n（8）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（11）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（12）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区位于阿坝州理县境内，在运行水电站区域开展作业时严格遵守电厂相关的安全管理规定，无人机航测作业时严格遵守公司安全操作规程开展作业。', NULL, '2022-04-26', '2022-06-09');
INSERT INTO `cmc_safe` VALUES ('1648881413244321794', '1648881413244321794', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：森林火险、消防安全、触电、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测区涉及建设工程区域内，严格遵守建设单位及作业区施工单位各项安全管理规定\n（2）本次项目位于江油县境内，外业测绘中涉及无人机等航飞作业，控制测绘，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（3）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准。\n（4）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动物伤害。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区涉及在建工程区域，严格遵守建设方安全管理规定，无人机飞行须按公司测绘作业安全操作规程开展作业。', NULL, '2022-04-19', '2023-07-08');
INSERT INTO `cmc_safe` VALUES ('1648881413265293314', '1648881413265293314', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高原病、森林火险、消防安全、触电、无人机飞行风险、动物伤害、淹溺、交通风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目作业区域地处高原高海拔，外业测绘中涉及无人机飞行、控制测绘等，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）本项目涉及相关方作业，相关方单位需具备此项目测绘作业资格，作业前需签订安全协议，协议中明确相关方安全职责和义务，项目管理人员加强对安全监管和经常性安全检查并留下管理痕迹，对潜在的危险源进行识别，做好作业中隐患排查等工作，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（3）因工作需要租用车辆，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全。\n（4）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（13）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务。没有按照规定申请空域时，只能使用微型无人机（7kg以下）在高度120m以下空域进行视距内（斜距500m）作业，并在作业前到所在区域治安大队或派出所报备；\n2）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（14）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备；\n（15）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（16）无人机电池充电时，须有人值守。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目涉及与合作单位共同完成，工作中加强相关方安全监管，签订安全管理协议，目前西藏地区处于森林防火严管期，严格遵守属地政府森林防火规定，进入林区不得带火种、不得吸烟，不随意丢弃烟头。', NULL, '2022-04-10', '2023-06-26');
INSERT INTO `cmc_safe` VALUES ('1648881413277876226', '1648881413277876226', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：森林火险、高处坠落、消防安全、触电、新冠肺炎疫情、无人机飞行风险、摔伤、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）项目位于盐源县境内，本次外业测绘涉及无人机航测、像控点采集等，安全风险较高，所有项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务。没有按照规定申请空域时，只能使用微型无人机（7kg以下）在高度120m以下空域进行视距内（斜距500m）作业，并在作业前到所在区域治安大队或派出所报备。\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（4）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备。\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（6）项目车辆做好日常维护保养，不得病车上路，驾驶员不得疲劳驾驶，分心驾驶，危险路段谨慎通行。\n（7）测区乡村道路多，路窄车多，路上临时停车时，在车前后设置警示标志，做好过往车辆行人安全提醒和警示。\n（8）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（9）提前关注、了解测区气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和班前安全活动。\n（10）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（11）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（12）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（13）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '目前处于盐源县大风季节，无人机飞行测量选择合适时段，飞行前做好相关报备，飞机开机后工作人员保持足够的安全距离，严防螺旋桨伤人事故发生。', NULL, '2022-04-10', '2022-05-23');
INSERT INTO `cmc_safe` VALUES ('1648881413294653441', '1648881413294653441', 113, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：淹溺、森林火险、高处坠落、消防安全、触电、新冠肺炎疫情、高原反应（病）、摔伤、跌倒、动物伤害等风险。 \n（三）针对隐患源制定的安全措施：\n（1）本次外业测绘涉及水下地形测绘、断面测量、无人机航测等，测区属于高原高海拔地区，安全风险较高，所有项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）水下地形测量中，所有作业人员须穿戴好符合要求的救生衣，风浪太大时段不能强行作业，水流湍急地段要根据实地具体情况采取相应安全防护措施后方可作业。\n（3）采用无人船作业时，工作前应对船只各部件进行全面检查，操作者须熟悉船只性能、参数及熟练掌握船只操作技能，无人船电池充电时须有人值守。\n（4）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务。没有按照规定申请空域时，只能使用微型无人机（7kg以下）在高度120m以下空域进行视距内（斜距500m）作业，并在作业前到所在区域治安大队或派出所报备。\n（5）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（6）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备。\n（7）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（8）项目车辆做好日常维护保养，不得病车上路，驾驶员不得疲劳驾驶，分心驾驶，危险路段谨慎通行。\n（9）测区乡村道路多，路窄车多，路上临时停车时，在车前后设置警示标志，做好过往车辆行人安全提醒和警示。\n（10）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（11）提前关注、了解测区气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和班前安全活动。\n（12）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（13）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（14）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（15）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（16）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程。\n（17）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '水下地形测量中全员穿戴好救生衣，无人机航飞前须到相关部门报备，飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。', NULL, '2022-04-01', '2022-05-30');
INSERT INTO `cmc_safe` VALUES ('1648881413311430658', '1648881413311430658', 35, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：森林火险、高处坠落、消防安全、触电、新冠肺炎疫情、无人机飞行风险、摔伤、跌倒、动物伤害等风险。 \n（三）针对隐患源制定的安全措施：\n（1）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务。没有按照规定申请空域时，只能使用微型无人机（7kg以下）在高度120m以下空域进行视距内（斜距500m）作业，并在作业前到所在区域治安大队或派出所报备。\n（2）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（3）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备。\n（4）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（5）本项目进出场路途遥远、提醒驾驶员不分心驾驶，不疲劳驾驶，注意休息，项目车辆做好日常维护保养，不得病车上路。\n（6）测区乡村道路多，路窄车多，路上临时停车时，在车前后设置警示标志，做好过往车辆行人安全提醒和警示。\n（7）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（8）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（9）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（10）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程。\n（12）目前还处于新冠肺炎疫情防控期，严格遵守属地政府防控规定。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-04-01', '2022-06-09');
INSERT INTO `cmc_safe` VALUES ('1648881413328207874', '1648881413328207874', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：森林火险、高处坠落、机械伤害、消防安全、触电、新冠肺炎疫情、高原反应（病）、摔伤、跌倒、动物伤害等风险。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守国网西藏电力有限公司拉萨发电公司及下属公司（电厂）安全管理制度，按要求编制好项目安全管理、文明施工等措施。\n（2）安全监测作业中需要临时用工时，用工前须购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥。\n（3）作业中涉及水电站区域，电器设备、电线较多，工作中不得随意触碰电气设备。\n（4）项目车辆做好日常维护保养，不得病车上路，驾驶员不得疲劳驾驶，分心驾驶，危险路段谨慎通行。\n（5）提前关注、了解测区气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和班前安全活动。\n（6）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（7）项目地处高原地区，进场前对参与人员做好健康筛查，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（8）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程。\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（12）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '按电厂要求编制好项目安全管理、文明施工等措施，遇到安全管理中棘手问题及时和公司沟通，不得违章指挥，冒险作业。', NULL, '2022-03-31', '2023-11-16');
INSERT INTO `cmc_safe` VALUES ('1648881413344985090', '1648881413344985090', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：森林火险、高处坠落、机械伤害、消防安全、触电、新冠肺炎疫情、高原反应（病）、摔伤、跌倒、动物伤害等风险。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守国网西藏电力有限公司拉萨发电公司及下属公司（电厂）安全管理制度，按要求编制好项目安全管理、文明施工等措施。\n（2）安全监测作业中需要临时用工时，用工前须购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥。\n（3）作业中涉及水电站区域，电器设备、电线较多，工作中不得随意触碰电气设备。\n（4）项目车辆做好日常维护保养，不得病车上路，驾驶员不得疲劳驾驶，分心驾驶，危险路段谨慎通行。\n（5）提前关注、了解测区气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和班前安全活动。\n（6）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（7）项目地处高原地区，进场前对参与人员做好健康筛查，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（8）项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程。\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（12）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严格遵守国网拉萨发电公司及电厂安全管理规定，遇到安全棘手问题及时跟公司沟通，不冒险作业。', NULL, '2022-03-31', '2024-05-21');
INSERT INTO `cmc_safe` VALUES ('1648881413361762305', '1648881413361762305', 59, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：交通风险、火灾、触电、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及在城区、乡镇数据收集、声像资料采集等工作，外业工作量相对较小，内业资料处理为主，工作中严防资料安全管理，住宿地消防安全，在存放资料区域严禁火源、严禁吸烟，随意丢弃烟头等。\n（2）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为。\n（3）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素。。\n（7）公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对委托单位安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（8）资料应做好备份，以防丢失；保管好设备防止丢失。\n（9）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人。\n（10）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（11）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '做好测绘成果资料保密、保存工作 ，较多的纸质版资料存放时间长，安全风险较大，做好消防安全、防潮防腐措施，确保测绘资料安全。', NULL, '2022-03-28', '2023-11-08');
INSERT INTO `cmc_safe` VALUES ('1648881413378539521', '1648881413378539521', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险因素及安全风险：森林火险、火灾、高处坠落、车辆伤害、机械伤害、物体打击、摔伤、砸伤、新冠肺炎疫情等。  \n（三）针对隐患源制定的安全措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害。\n（2）测区道路部分属于乡村道路、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（3）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务。没有按照规定申请空域时，只能使用微型无人机（7kg以下）在高度120m以下空域进行视距内（斜距500m）作业，并在作业前到所在区域治安大队或派出所报备。\n（4）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（5）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备。\n（6）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（8）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）驾乘人员遵章守纪。驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '无人机航测作业须按测绘作业安全操作规程要求到相关单位报备，无人机外业作业前应做好天气情况收集工作。每架次起飞作业前后，检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。', NULL, '2022-03-31', '2022-05-23');
INSERT INTO `cmc_safe` VALUES ('1648881413395316737', '1648881413395316737', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：机械伤害、高处坠落、消防安全、触电、物体打击、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）项目在广东省韶关市乳源县，测区涉及在建的标准厂房沉降观测，涉及建筑施工区域作业，项目所有参与人员全程戴好安全帽、反光背心等劳动防护用品。\n（2）作业中涉及建筑工地，电器设备、电线较多，工作中不得随意触碰电气设备。\n（3）工作中做好安全提醒和防护，严防物体打击、高处坠落事故发生。\n（4）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素。。\n（7）项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度。\n（9）工作中严防摔伤、砸伤、滑倒。\n（10）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '作业中涉及建筑工地，电器设备、电线较多，工作中不得随意触碰电气设备，工作中做好安全提醒和防护，严防物体打击、高处坠落事故发生。', NULL, '2022-03-28', '2023-02-19');
INSERT INTO `cmc_safe` VALUES ('1648881413412093953', '1648881413412093953', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：森林火险、消防安全、高处坠落、触电、动物伤害、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于牙根II级水电站区域，外业测绘中涉及无人机等航飞作业、控制测绘、水下地形测绘等，测区属于高山峡谷、要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务。没有按照规定申请空域时，只能使用微型无人机（7kg以下）在高度120m以下空域进行视距内（斜距500m）作业，并在作业前到所在区域治安大队或派出所报备。\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（4）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备。\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（6）水下地形测量中，所有作业人员须穿戴好符合要求的救生衣，风浪太大时段不能强行作业，水流湍急地段要根据实地具体情况采取相应安全防护措施后方可作业。\n（7）采用无人船作业时，工作前应对船只各部件进行全面检查，操作者须熟悉船只性能、参数及熟练掌握船只操作技能，无人船电池充电时须有人值守。\n（8）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（9）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（10）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（11）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（12）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（13）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（14）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（15）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区涉及甘孜州九龙县、雅江县，目前处于森林防火严管期，请严格遵守相关规定，麻郎错集镇至雅江县沿河公路边坡落石较为严重，请做好防范措施，和当地老乡做好沟通，未经允许不得将工作内容外传，避免发生矛盾和纠纷。', NULL, '2022-03-24', '2023-09-06');
INSERT INTO `cmc_safe` VALUES ('1648881413428871170', '1648881413428871170', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：森林火险、火灾、高处坠落、车辆伤害、机械伤害、物体打击、摔伤、砸伤、新冠肺炎疫情等。  \n（三）针对隐患源制定的安全措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害。\n（2）测区道路部分属于乡村道路、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（3）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务。没有按照规定申请空域时，只能使用微型无人机（7kg以下）在高度120m以下空域进行视距内（斜距500m）作业，并在作业前到所在区域治安大队或派出所报备。\n（4）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（5）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备。\n（6）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（8）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目涉及无人机航测外业作业，作业前须到相关部门报备，起飞前2人对飞机各固件交叉检查，无人机通电后人员远离螺旋桨，避免受到伤害，森林防火严管期进入林区严禁携带火种、不得在林区吸烟、随意丢弃烟头等', NULL, '2022-03-28', '2023-07-12');
INSERT INTO `cmc_safe` VALUES ('1648881413441454081', '1648881413441454081', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险因素及安全风险：森林火险、火灾、高处坠落、车辆伤害、机械伤害、物体打击、摔伤、砸伤、新冠肺炎疫情等。  \n（三）针对隐患源制定的安全措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害。\n（2）测区道路部分属于乡村道路、简易公路，工作中要求驾驶员谨慎驾驶，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（3）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务。没有按照规定申请空域时，只能使用微型无人机（7kg以下）在高度120m以下空域进行视距内（斜距500m）作业，并在作业前到所在区域治安大队或派出所报备。\n（4）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（5）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备。\n（6）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（8）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）驾乘人员遵章守纪。驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '严格按公司发布的测绘作业安全操作规程开展作业', NULL, '2022-03-31', '2023-07-31');
INSERT INTO `cmc_safe` VALUES ('1648881413462425602', '1648881413462425602', 34, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：道路交通安全、消防安全、触电、无人机飞行安全、森林防火、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目作业区域地处新疆哈密，路途遥远、外业测绘中涉及无人机飞行、控制测绘等，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务。没有按照规定申请空域时，只能使用微型无人机（7kg以下）在高度120m以下空域进行视距内（斜距500m）作业，并在作业前到所在区域治安大队或派出所报备。\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（4）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）本次进出场路途遥远、不得疲劳驾驶、超速行驶、分心驾驶，外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（13）严格遵守建设单位及作业区施工单位各项安全管理规定，测绘现场作业中要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本次进出场路途遥远，提醒驾驶员不疲劳驾驶，特别是长时间高速公路驾车，一定注意休息，务必将安全交底内容传达到参与项目作业的每一位员工。', NULL, '2022-03-22', '2022-10-25');
INSERT INTO `cmc_safe` VALUES ('1648881413483397121', '1648881413483397121', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：森林火险、消防安全、高处坠落、触电、动物伤害、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于楞古、牙根水电站区域，外业测绘中涉及无人机等航飞作业、控制测绘、水下地形测绘等，测区属于高山峡谷、要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务。没有按照规定申请空域时，只能使用微型无人机（7kg以下）在高度120m以下空域进行视距内（斜距500m）作业，并在作业前到所在区域治安大队或派出所报备。\n（3）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（4）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备。\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（6）水下地形测量中，所有作业人员须穿戴好符合要求的救生衣，风浪太大时段不能强行作业，水流湍急地段要根据实地具体情况采取相应安全防护措施后方可作业。\n（7）采用无人船作业时，工作前应对船只各部件进行全面检查，操作者须熟悉船只性能、参数及熟练掌握船只操作技能，无人船电池充电时须有人值守。\n（8）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（9）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（10）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（11）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（12）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（13）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（14）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（15）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头，禁止随意丢弃烟头。进入林区时，小心动物伤害。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-03-22', '2023-07-15');
INSERT INTO `cmc_safe` VALUES ('1648881413500174338', '1648881413500174338', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。 \n（二）本项目存在的危险源及安全风险：高处坠落、边坡落石、森林防火、消防安全、交通安全、踩空、摔伤、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）本项目涉及大无人机搭载激光航飞、像控点采集等作业，所有参与人员提高安全意识，高度重视作业安全管理。\n（2）作业人员必须了解、掌握所使用的测绘仪器、设备的安全技术特性和操作使用方法，作业时应采取有效的安全防护措施。\n（3）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务。没有按照规定申请空域时，只能使用微型无人机（7kg以下）在高度120m以下空域进行视距内（斜距500m）作业，并在作业前到所在区域治安大队或派出所报备。\n（4）无人机操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（5）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（6）无人机电池充电时，须有人值守。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。\n（7）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头.\n（8）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（9）目前处于肺炎疫情防控期，，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发热、咳嗽等症状规范就医。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测区午后风较大，无人机作业时选择合理时段，无人机起飞前对各固件需2人交叉检查，飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。', NULL, '2022-03-17', '2022-11-07');
INSERT INTO `cmc_safe` VALUES ('1648881413512757249', '1648881413512757249', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高原病、森林火险、消防安全、触电、动物伤害、淹溺、交通风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目作业区域地处高原高海拔，外业测绘中涉及无人机飞行、控制测绘等，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务。没有按照规定申请空域时，只能使用微型无人机（7kg以下）在高度120m以下空域进行视距内（斜距500m）作业，并在作业前到所在区域治安大队或派出所报备。\n（3）操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全。\n（4）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-03-16', '2023-08-10');
INSERT INTO `cmc_safe` VALUES ('1648881413529534465', '1648881413529534465', 113, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：淹溺、交通安全、消防安全、森林防火、边坡落石、摔伤、砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及水下地形测量，本项目严禁租用机动船或使用皮划艇用于涉水作业，水边点测量尽可能避免人工水边立尺，所有临水边测绘作业人员需穿戴好符合要求地救生衣。\n（2）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（3）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（4）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（5）进一步落实安全生产责任制，坚持贯彻“安全第一、预防为主、综合治理”的方针，坚持“管生产必须管安全”的原则。强化组织机构，落实安全生产奖惩制度，将安全生产责任落实到人。\n（6）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（7）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-03-12', '2023-06-30');
INSERT INTO `cmc_safe` VALUES ('1648881413550505985', '1648881413550505985', 94, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高原病、森林火险、消防安全、触电、动物伤害、淹溺、交通风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目作业区域地处高原高海拔，外业测绘中涉及无人机飞行、控制测绘等，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查并留下管理痕迹，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（3）因工作需要租用车辆，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全。\n（4）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（13）无人机测量应取得测区相应空管单位的空域申请许可，并严格按照相关规定执行无人机飞行任务。没有按照规定申请空域时，只能使用微型无人机（7kg以下）在高度120m以下空域进行视距内（斜距500m）作业，并在作业前到所在区域治安大队或派出所报备；\n2）操控人员应具备航空管理部门或机构认可的安全操作资格，起降时，无关人员应远离起降地点20m以外。飞行作业时，应时刻关注飞行监控器状态，防止由于突发情况飞机失去控制危及人身及相关财物安全；\n（14）无人机外业选择起降场地应在空旷且无风口处，保证起降场地远离居民区上空，远离高压线、雷达站、信号塔等强磁场源，以免无人机内部传感器受到影响，造成安全事故。现场作业应时刻关注天气状况的变化，做好突发热雷暴、低空风切变等状况出现的准备；\n（15）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》；\n（16）无人机电池充电时，须有人值守。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-03-16', '2023-07-07');
INSERT INTO `cmc_safe` VALUES ('1648881413567283202', '1648881413567283202', 121, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：高原病、交通风险、边坡落石、高处坠落、物体打击、坍塌、触电、动植物伤害、摔倒等安全风险等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目地处阿坝州境内，属于高原高海拔地区，涉及建筑施工区域测量作业，安全风险较高，要求项目所有人员高度重视安全生产工作，严格遵守业主及公司安全管理规定。\n（2）作业中佩戴好安全帽、反光背心、手套等安全防护用品，严防作业区上部滚石、高空坠物等。\n（3）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（4）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（5）森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（6）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出车前检查防滑链等应急设备是否齐全。\n（7）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（9）施工区域电器设备、设施较多，工作中不得冒险触碰。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-03-12', '2023-06-26');
INSERT INTO `cmc_safe` VALUES ('1648881413584060417', '1648881413584060417', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：森林火险、消防安全、触电、动物伤害、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于甘孜州泸定县境内，外业测绘中涉及无人机等航飞作业，水下地形测绘、控制测绘，人工现场地形图实测等，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准。\n（3）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。\n（4）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动物伤害。\n（13）水下地形测量，全部采用无人船测量，无人船的收放区域必须选在水流平缓部位，且不得单人作业，作业人员穿戴救生衣，在水边线以上安全部位进行遥控操作，不得涉水,无人船电池充电须留人值守。 \n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-03-01', '2023-06-29');
INSERT INTO `cmc_safe` VALUES ('1648881413626003458', '1648881413626003458', 122, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：触电、高原病、交通风险、边坡落石、高处坠落、物体打击、起重伤害、机械伤害、坍塌、触电、动植物伤害、临水边测量溺水、摔倒等安全风险等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目地处甘孜州境内，属于高原高海拔地区，涉及建筑施工区域测量作业，安全风险较高，要求项目所有人员高度重视安全生产工作，严格遵守两河口水电站业主及公司安全管理规定。\n（2）作业中佩戴好安全帽、反光背心、手套等安全防护用品，严防作业区上部滚石、高空坠物等。\n（3）在泄水建筑物出口及附近区域等高度危险区作业，作业前应与调度部门协调作业时间，作业中应保持高度警惕，防止意外泄洪事件发生。\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与施工人员或管理人员取得联系，不冒险作业。\n（5）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（6）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（7）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（8）森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（9）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出车前检查防滑链等应急设备是否齐全。\n（10）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）施工区域电器设备、设施较多，工作中不得冒险触碰。\n（13）项目工作时间长，人员合理休假安排，做好员工心理疏导。\n（14）进一步完善中心安全风险分级管控和隐患排查治理，根据中心实际情况开展好安全教育培训、安全知识宣传，落实全员安全责任制。\n（15）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，务必引起重视，做到人离断电。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-02-25', '2023-02-03');
INSERT INTO `cmc_safe` VALUES ('1648881413651169282', '1648881413651169282', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：森林火险、消防安全、触电、动物伤害、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于甘孜州境内，外业测绘中涉及无人机等航飞作业，控制测绘，人工现场地形图实测等，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准。\n（3）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。\n（4）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动物伤害。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-02-25', '2023-12-13');
INSERT INTO `cmc_safe` VALUES ('1648881413667946498', '1648881413667946498', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：森林火险、消防安全、触电、动物伤害、淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于甘孜州境内，外业测绘中涉及无人机等航飞作业，控制测绘，人工现场地形图实测等，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，航线设计须满足相关规范要求并达到安全标准。\n（3）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故。\n（4）无人机外业作业前应做好天气情况、作业环境的资料收集工作。每架次起飞作业前后，应检查并紧固各设备附件，以防附件掉落伤人。飞机通电时，应确保人员远离螺旋桨，并检查遥控器状态，以防螺旋桨转动伤人。每个架次须按规定填写《无人机飞行记录表》。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动物伤害。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-02-25', '2023-07-08');
INSERT INTO `cmc_safe` VALUES ('1648881413684723714', '1648881413684723714', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：交通风险、森林防火、消防安全、触电、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于乐山市、无人机等航飞作业，控制测绘，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）在沼泽地区作业时，要仔细观察地貌和植被状况，采取相应措施；对难于探测深浅的地方，应绕道而行。\n（4）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（5）生产和作业驻地应作好防火、防盗、防洪、防震、防泥石流、防雪崩、防雷击等安全防范工作，应注意环境与饮食卫生，防止传染病感染。\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（7）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（8）在人、车流量大的城区作业时，应穿着色彩醒目的安全警示反光马夹，必要时应设置安全警示标志牌（墩），并安排专人担任安全警戒。\n（9）在桥梁和隧道附近以及公路弯道和视线不清的地点作业时，应事先设置安全警示标志牌（墩）。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（12）无人机电池充电时，须有人值守，禁止在人员睡眠期间进行充电。使用前应对电池外观进行检查并做好相应记录，避免电池使用不当造成事故.\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-02-18', '2023-07-15');
INSERT INTO `cmc_safe` VALUES ('1648881413709889537', '1648881413709889537', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：森林（草原）火灾、边坡坠物落石、道路交通、消防安全、触电、新冠肺炎疫情、摔伤、跌倒、滑倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）项目位于汉源县、，属于高山峡谷地区，本次外业测绘涉及、无人机航飞行及像控点采集等，安全风险较高，所有项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）提醒驾驶员不得疲劳驾驶，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶等行为。\n（3）无人机航飞作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（4）测区乡村道路较多，路窄车多，路上临时停车时，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（5）提前关注、了解测区气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和班前安全活动。\n（6）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，对测绘设备充电时不得违规充电、超长时间充电。\n（7）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（8）目前还处于森林（草原）防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）因工作需要租用车辆，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全，\n（11）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（12）项目实施过程中做好隐患排查治理，面对安全隐患敢于发声，敢于碰硬，对于作业中不安全行为须积极制止，项目安全隐患排查治理须留下相关记录，项目完成后将排查记录抄送至公司综合事务部。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-02-15', '2023-07-31');
INSERT INTO `cmc_safe` VALUES ('1648881413730861058', '1648881413730861058', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人，\n（7）城区作业时，道路交通风险较高，工作前须做好安全防护措施。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-01-27', '2022-08-15');
INSERT INTO `cmc_safe` VALUES ('1648881413751832578', '1648881413751832578', 113, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：森林火险、消防安全、触电、动物伤害、交通风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目作业区域地处高原高海拔，外业测绘中涉及界桩制作、界桩搬运、界桩安装、控制测绘等，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）因工作需要租用车辆，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全。\n（3）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（4）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（5）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（7）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（9）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（10）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（12）界桩制作、搬运、安全过程中做好安全管控，委托其他单位完成时，签订安全协议，明确相关职责。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '界桩制作、搬运、安全过程中做好安全管控，委托其他单位完成时，签订安全协议，明确相关职责.', NULL, '2022-03-21', '2023-03-17');
INSERT INTO `cmc_safe` VALUES ('1648881413785387010', '1648881413785387010', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。 \n（二）本项目存在的危险源及安全风险：森林防火、消防安全、高处坠落、边坡落石、交通安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）项目地处攀枝花市境内，作业中涉及水准测量、监测点控制点测量等，项目员工须高度重视安全生产工作，提升全员安全意识、落实全员安全责任制。\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和二滩电厂有关安全管理规定及公司有关安全生产规章制度。\n（3）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为.\n（4）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故.\n（5）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件.\n（6）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生.\n（7）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（8）野外作业要注意毒蛇、毒蜂等危害动物，携带必要的防护用品和药品.\n（9）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全\n（10）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（11） 岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳。水上作业应穿救生衣，及时观察水域附近情况。\n（12）工作现场禁止吸烟，野外作业禁止携带火种。\n（13）项目时间较长，合理安排员工休假，关注员工心理状态。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-01-27', '2023-06-26');
INSERT INTO `cmc_safe` VALUES ('1648881413806358530', '1648881413806358530', 122, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：触电、高原病、交通风险、边坡落石、高处坠落、物体打击、起重伤害、机械伤害、坍塌、触电、动植物伤害、临水边测量溺水、摔倒等安全风险等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目地处甘孜州境内，属于高原高海拔地区，涉及建筑施工区域测量作业，安全风险较高，要求中心所有人员高度重视安全生产工作，严格遵守两河口水电站业主及公司安全管理规定。\n（2）作业中佩戴好安全帽、反光背心、手套等安全防护用品，严防作业区上部滚石、高空坠物等。\n（3）在泄水建筑物出口及附近区域等高度危险区作业，作业前应与调度部门协调作业时间，作业中应保持高度警惕，防止意外泄洪事件发生。\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与施工人员或管理人员取得联系，不冒险作业。\n（5）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（6）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（7）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（8）森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（9）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出车前检查防滑链等应急设备是否齐全。\n（10）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）施工区域电器设备、设施较多，工作中不得冒险触碰。\n（13）测量中心工作时间长，人员合理休假安排，做好员工心理疏导。\n（14）进一步完善中心安全风险分级管控和隐患排查治理，根据中心实际情况开展好安全教育培训、安全知识宣传，落实全员安全责任制。\n（15）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，务必引起重视，做到人离断电。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '测量中心现场工作时间较长，合理安排中心员工休假，工作中杜绝侥幸心理、从众心理等心理状态，冬季天气寒冷严防电器火灾事故，离开办公室关闭电源。', NULL, '2022-01-27', '2023-10-10');
INSERT INTO `cmc_safe` VALUES ('1648881413827330049', '1648881413827330049', 121, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：触电、交通风险、边坡落石、高处坠落、物体打击、起重伤害、机械伤害、坍塌、触电、动植物伤害、临水边测量溺水、摔倒等安全风险等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目地处阿坝州J金川县境内，属于高原高海拔地区，涉及建筑施工区域测量作业，安全风险较高，要求中心所有人员高度重视安全生产工作，严格遵守金川水电站业主及公司安全管理规定。\n（2）作业中佩戴好安全帽、反光背心、手套等安全防护用品，严防作业区上部滚石、高空坠物等。\n（3）在泄水建筑物出口及附近区域等高度危险区作业，作业前应与调度部门协调作业时间，作业中应保持高度警惕，防止意外泄洪事件发生。\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与施工人员或管理人员取得联系，不冒险作业。\n（5）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（6）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（7）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（8）森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（9）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出车前检查防滑链等应急设备是否齐全。\n（10）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）施工区域电器设备、设施较多，工作中不得冒险触碰。\n（13）测量中心工作时间长，人员合理休假安排，做好员工心理疏导。\n（14）进一步完善中心安全风险分级管控和隐患排查治理，根据中心实际情况开展好安全教育培训、安全知识宣传，落实全员安全责任制。\n（15）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，务必引起重视，做到人离断电。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '金川水电站处于建设高峰期，外业测绘作业中安全风险高，中心所有人员高度重视安全生产工作，特别是涉及隧洞施工中掌子面开挖、边坡开挖支付区域、竖井施工等作业时要高度警惕，确保完成中心安全生产目标', NULL, '2022-01-21', '2023-02-22');
INSERT INTO `cmc_safe` VALUES ('1648881413844107265', '1648881413844107265', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。 \n（二）本项目存在的危险源及安全风险：森林防火、消防安全、高处坠落、边坡落石、交通安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）项目地处甘孜州境内，作业中涉及水准测量、监测点控制点测量等，项目员工须高度重视安全生产工作，提升全员安全意识、落实全员安全责任制。\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和猴子岩电厂有关安全管理规定及公司有关安全生产规章制度。\n（3）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为.\n（4）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故.\n（5）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件.\n（6）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生.\n（7）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（8）野外作业要注意毒蛇、毒蜂等危害动物，携带必要的防护用品和药品.\n（9）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全\n（10）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（11） 岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳。水上作业应穿救生衣，及时观察水域附近情况。\n（12）工作现场禁止吸烟，野外作业禁止携带火种。\n（13）项目时间较长，合理安排员工休假，关注员工心理状态。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-01-27', '2024-06-01');
INSERT INTO `cmc_safe` VALUES ('1648881413860884481', '1648881413860884481', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。 \n（二）本项目存在的危险源及安全风险：森林防火、消防安全、高处坠落、边坡落石、交通安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）项目地处攀枝花市境内，作业中涉及水准测量、监测点控制点测量等，项目员工须高度重视安全生产工作，提升全员安全意识、落实全员安全责任制。\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和二滩电厂有关安全管理规定及公司有关安全生产规章制度。\n（3）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为.\n（4）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故.\n（5）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件.\n（6）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生.\n（7）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（8）野外作业要注意毒蛇、毒蜂等危害动物，携带必要的防护用品和药品.\n（9）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全\n（10）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（11） 岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳。水上作业应穿救生衣，及时观察水域附近情况。\n（12）工作现场禁止吸烟，野外作业禁止携带火种。\n（13）项目时间较长，合理安排员工休假，关注员工心理状态。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目涉及临时用工较多，须加强安全教育和培训，购买相关保险。项目存在兼职驾驶公司车辆情况，加大驾乘人员安全教育，不得有酒后驾驶、超速驾驶、分心驾驶等不安全行为，项目持续时间较长，合理安排员工休假，关注员工心理变化。', NULL, '2022-01-27', '2024-04-10');
INSERT INTO `cmc_safe` VALUES ('1648881413877661698', '1648881413877661698', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：消防安全、交通安全、边坡坠物（落石）、触电、作业中摔伤砸伤、新冠肺炎疫情等\n（二）针对隐患源制定的安全措施：\n（1）无人机航测前到相关单位进行报备，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（2）项目进出场路途遥远，项目负责人督促严格遵守交通规则，不野蛮驾驶、分心驾驶、疲劳驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养。\n（3）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育，做好隐患排查治理，排查治理情况做好记录。\n（4）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（5）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外.\n（6）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（7）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（8）时下正值寒冬季节，雾多、霜多、冰雪多、气温低，环境复杂，。注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（10）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（11）目前处于新冠肺炎疫情防控期，严格遵守属地政府疫情防控规定，工作中做好防护，返回成都时按要求对所有人员做核酸检测。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-01-15', '2023-07-15');
INSERT INTO `cmc_safe` VALUES ('1648881413894438914', '1648881413894438914', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：消防安全、交通安全、边坡坠物（落石）、触电、作业中摔伤砸伤等\n（二）针对隐患源制定的安全措施：\n（1）无人机航测前到相关单位进行报备，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（2）项目驾驶员刚入职不久，项目负责人督促严格遵守交通规则，不野蛮驾驶、分心驾驶、疲劳驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养。\n（3）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育，做好隐患排查治理，排查治理情况做好记录。\n（4）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（5）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外.\n（6）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（7）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（8）时下正值寒冬季节，雾多、霜多、冰雪多、气温低，环境复杂，。注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（10）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-01-15', '2023-07-25');
INSERT INTO `cmc_safe` VALUES ('1648881413911216130', '1648881413911216130', 145, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：淹溺、交通风险、无人机飞行安全风险、作业中摔伤砸伤、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于乐山市，外业测绘中涉及大面积水下地形测绘、无人机等航飞作业，控制测绘，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机航测作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（4）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（5）本次水下地形测绘工作量较大，施测区域河道地形复杂，有较多的浅滩、激流、河滩沼泽地等，要求施测前对测区全面踏勘了解，做好合理工作安排，不明区域不冒险开展测绘，所有人员作业中穿戴好救生衣，确保人员、设备安全。\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（7）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（9）无人船、无人机电池属于大功率电池，充电时须留人值守，不违规充电。\n（10）工作中严防摔伤、砸伤、滑倒，河滩沼泽地谨慎通过。\n（11）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案和属地政府防控制度。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本次水下地形测绘工作量较大，施测区域河道地形复杂，有较多的浅滩、激流、河滩沼泽地等，要求施测前对测区全面踏勘了解，做好合理工作安排，不明区域不冒险开展测绘，所有人员作业中穿戴好救生衣，确保人员、设备安全。', NULL, '2022-01-12', '2023-07-06');
INSERT INTO `cmc_safe` VALUES ('1648881413927993346', '1648881413927993346', 113, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高原病、边坡坠物（落石）、车辆伤害、无人机飞行安全风险、作业中摔伤砸伤、森林防火、消防安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于阿坝州境内，外业测绘中涉及无人机等航飞作业、合作单位参与作业、控制测量、像控点采集等，要求项目负责人及参与人员高度重视安全生产工作，加强员工安全意识教育， 工作中做好隐患排查治理。\n（2）无人机飞行作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）目前肺炎疫情有所反弹，严格遵守属地政府防控规定，有中高风险旅居史的人员不得参与本次作业。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（5）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全\n (7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（11）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作.', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及与合作单位参与作业，参与单位须具备相关作业资质，项目负责人针对现场实际情况，做好安全交底，冬季藏区冰雪道路较多，要求驾驶员谨慎驾驶。', NULL, '2022-01-05', '2023-06-27');
INSERT INTO `cmc_safe` VALUES ('1648881413948964865', '1648881413948964865', 145, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：水下地形测绘溺水、道路交通事故、作业中摔伤砸伤、森林防火、触电、高空坠物、边坡落石、消防安全、新冠肺炎疫情、中毒、斗殴等。 \n（三）针对隐患源制定的安全措施：\n（1）猴子岩水电站地形图测量项目地处甘孜州，外业测绘中涉及水下地形测绘、控制测量等，要求项目负责人及参与人员高度重视安全生产工作，落实全员安全责任制，加强员工安全意识教育，作业前做好安全技能、安全知识培训，作业中做好隐患排查治理，并将相关开展情况及时报送至公司专职安全管理员。严格遵守猴子岩水电站电厂安全管理规定。\n（2）外业测绘中由于环境条件艰苦，对员工身体健康情况要求较高，作业前项目负责人须筛查参与人员身体健康状况，并查看相关的体检报告，有严重的心脏、肾部、肺部、肝部、高血压等疾病不得参与本次作业。\n（3）目前还处于新冠肺炎疫情防控期，严格遵守属地政府和相关单位疫情防控规定，工作中做好个人防护，维护自身身体健康。\n（4）沿交通干线、城镇区域作业时穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（5）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。出差（出工）期间驾驶员严禁饮酒。\n（6）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通\n（7）加强森林防火教育培训，遵守属地政府和相关单位森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（9）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾。测绘设备部违规充电，大功率电池充电时须有人值守。\n（10）水上作业时，作业人员应穿戴好符合要求的救生衣，工作人员严禁在库内游泳、戏水、钓鱼，严禁酒后作业。\n（11）岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳。水上作业应穿救生衣，及时观察水域附近情况。\n（12）工作时禁止触碰与工作无关的电气设备。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本次施测区域地处猴子岩水电站，严格遵守业主单位安全管理规定，有部分河段存在浅滩和激流，作业前先行踏勘，确保安全前提下开展测量，参与人员全程穿戴好救生衣。', NULL, '2022-01-05', '2023-06-29');
INSERT INTO `cmc_safe` VALUES ('1648881413965742081', '1648881413965742081', 120, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：触电、高原病、交通风险、边坡落石、高处坠落、物体打击、起重伤害、机械伤害、坍塌、触电、动植物伤害、临水边测量溺水、摔倒等安全风险等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目地处阿坝州境内，属于高原高海拔地区，涉及建筑施工区域测量作业，安全风险较高，要求中心所有人员高度重视安全生产工作，严格遵守双江口水电站业主及公司安全管理规定。\n（2）作业中佩戴好安全帽、反光背心、手套等安全防护用品，严防作业区上部滚石、高空坠物等。\n（3）在泄水建筑物出口及附近区域等高度危险区作业，作业前应与调度部门协调作业时间，作业中应保持高度警惕，防止意外泄洪事件发生。\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与施工人员或管理人员取得联系，不冒险作业。\n（5）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（6）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（7）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（8）森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（9）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出车前检查防滑链等应急设备是否齐全。\n（10）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）施工区域电器设备、设施较多，工作中不得冒险触碰。\n（13）测量中心工作时间长，人员合理休假安排，做好员工心理疏导。\n（14）进一步完善中心安全风险分级管控和隐患排查治理，根据中心实际情况开展好安全教育培训、安全知识宣传，落实全员安全责任制。\n（15）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，务必引起重视，做到人离断电。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '在建水电站施工区域测绘作业存在较多的安全风险和突发状况，请中心所有人员高度重视安全生产，工作中杜绝侥幸心理、麻痹大意等不安全心理因素，严格遵守双江口水电站建设单位和属地政府各项安全管理规定。', NULL, '2022-01-09', '2023-02-20');
INSERT INTO `cmc_safe` VALUES ('1648881413986713601', '1648881413986713601', 120, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：触电、高原病、交通风险、边坡落石、高处坠落、物体打击、起重伤害、机械伤害、坍塌、触电、动植物伤害、临水边测量溺水、摔倒等安全风险等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目地处阿坝州境内，属于高原高海拔地区，涉及在建水电站施工区域测量作业，安全风险较高，要求中心所有人员高度重视安全生产工作，严格遵守建设单位及公司安全管理规定。\n（2）作业中佩戴好安全帽、反光背心、手套等安全防护用品，严防作业区上部滚石、高空坠物等。\n（3）在泄水建筑物出口及附近区域等高度危险区作业，作业前应与调度部门协调作业时间，作业中应保持高度警惕，防止意外泄洪事件发生。\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与施工人员或管理人员取得联系，不冒险作业。\n（5）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（6）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（7）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（8）森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（9）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出车前检查防滑链等应急设备是否齐全。\n（10）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）施工区域电器设备、设施较多，工作中不得冒险触碰。\n（13）测量中心工作时间长，人员合理休假安排，做好员工心理疏导。\n（14）进一步完善中心安全风险分级管控和隐患排查治理，根据中心实际情况开展好安全教育培训、安全知识宣传，落实全员安全责任制。\n（15）加强消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，务必引起重视，做到人离断电。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '在建水电站施工区域测绘作业存在较多的安全风险和突发状况，请中心所有人员高度重视安全生产，工作中杜绝侥幸心理、麻痹大意等不安全心理因素，严格遵守巴拉水电站建设单位和属地政府各项安全管理规定。', NULL, '2022-01-09', '2023-06-27');
INSERT INTO `cmc_safe` VALUES ('1648881414003490818', '1648881414003490818', 113, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：边坡坠物（落石）、车辆伤害、无人机飞行安全风险、作业中摔伤砸伤、森林防火、消防安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于重庆市，外业测绘中涉及无人机等航飞作业、控制测量、像控点采集等，要求项目负责人及参与人员高度重视安全生产工作，加强员工安全意识教育， 工作中做好隐患排查治理。\n（2）无人机飞行作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）目前肺炎疫情有所反弹，严格遵守属地政府防控规定，有中高风险旅居史的人员不得参与本次作业。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（5）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全\n (7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（11）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作.', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-01-04', '2023-06-30');
INSERT INTO `cmc_safe` VALUES ('1648881414020268033', '1648881414020268033', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。 \n（二）本项目存在的主要安全隐患：高处坠落、森林火险、消防安全、交通安全、边坡坠物（落石）、作业中摔伤砸伤等。\n（二）针对隐患源制定的安全措施：\n（1）目前处于森林防火期，严格遵守属地政府森林防火管理规定、进入林区严禁吸烟、携带火种，更不得随意丢弃烟头。\n（2）项目负责人督促严格督促驾驶员遵守交通规则，不野蛮驾驶、分心驾驶、疲劳驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养。\n（3）项目涉及和其他合作单位协调作业，严格遵守相关方安全管理规定。\n（4）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（5）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外.\n（6）测区属于高山峡谷地区，工作中严防边坡落石等地质灾害。\n（7）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（8）时下正值寒冬季节，雾多、霜多、冰雪多、气温低，环境复杂，。注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（10）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-12-14', '2023-06-28');
INSERT INTO `cmc_safe` VALUES ('1648881414037045250', '1648881414037045250', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高原病、森林（草原）火险、道路交通风险、无人机飞行安全风险、作业中摔伤砸伤、食品安全、住宿地消防安全、边坡落石（坠物）、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目地处西藏自治区，测区道路交通、住宿、通信条件都较差，作业中安全风险高，请项目人员从思想上高度重视。\n（2）高原高海拔地区对作业人员身体健康要求较高，进场前做好人员健康筛查，有以下情况和医嘱者不宜进入高原：严重的心脏、肾部、肺部、肝部、高血压等疾病。\n（3）项目进出场和测区转换路途遥远，涉及简易公路、危险路段、山区路段较多，提醒驾驶员不疲劳驾驶，冒险驾驶。通过危险路段先查看，在确保安全前提下谨慎通过。\n（4）目前正值秋冬季节，高海拔地区冰雪道路较多，特别是暗冰路段极易造成交通事故，出发前检查好车况，备齐防滑链等车用应急物品。\n（5）秋冬季节也是藏区森林防火严管期，所有人员在林区严禁吸烟、携带火种，更不得野外用火。\n（6）测区住宿条件较差，住宿地做好消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（7）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品（红景天口服液、高原康、葡萄糖口服液等）。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定。\n（8）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（9）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（10）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（13）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-12-14', '2023-07-12');
INSERT INTO `cmc_safe` VALUES ('1648881414049628162', '1648881414049628162', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的安全隐患：交通安全、消防安全、机械伤害、汛期自然灾害等。 \n（三）针对隐患源制定的安全措施：\n（1）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为。\n（2）出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾。\n（3）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（4）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育。\n（5）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（6）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-12-13', '2023-07-12');
INSERT INTO `cmc_safe` VALUES ('1648881414066405378', '1648881414066405378', 143, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：消防安全、交通安全。 \n（二）针对隐患源制定的安全措施：\n（1）在独立上岗前掌握本职工作所需的安全生产知识和安全操作技能，掌握安全设备、设施、劳动防护用品的使用、维护知识；\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视；\n（3）资料应做好备份，以防丢失；保管好设备防止丢失；\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人，\n（7）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（8）工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2023-06-12', '2023-06-21');
INSERT INTO `cmc_safe` VALUES ('1648881414066405379', '1648881414066405379', 138, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。', '（一）本项目安全生产工作目标：\n（1）确保生产安全事故从业人员死亡率、重伤率为零；\n（2）不发生负主责的一般及以上交通事故；\n（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；\n（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；\n（5）不发生一般及以上突发环境事件；\n（6）有效防范各类自然灾害，避免人身伤害或财产损失；\n（二）本项目存在的安全风险：触电、交通风险、高处坠落、物体打击、起重伤害、机械伤害、坍塌、摔倒等安全风险等。 \n（三）针对安全风险制定管控措施：\n（1）项目部须结合地铁施工现场实际情况制定监测作业安全操作规程、安全生产责任制，建立项目安全组织机构，与公司和项目员工签订安全生产责任书。\n（2）现场作业时，必须遵守业主及相关单位安全、技术操作规程，穿戴好相应的劳动安全防护用具，注意人身和仪器的安全，禁止冒险作业。\n（3）作业中佩戴好安全帽、反光背心、手套、安全带、安全绳等安全设备和增加防护措施，注意作业区上部滚石、高空坠物等。\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与现场施工人员或管理人员取得联系。作业应佩戴必要的安全防护用品和通讯设施，作业时注意洞顶物件坠落、坍塌、渗（漏）水等情况；\n（5）项目租用办公室、住宿房屋（套）较多，居住密集，须加强日常消防安全管理，配置灭火器，督促大家养成不卧床吸烟，随意丢弃烟头的习惯；\n（6）严禁触碰施工现场电器设备，进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（7）项目在作业中尽可能避免交叉作业、并行作业，如确须交叉、并行作业，须制定安全措施，作业前和相关作业单位做好联系、沟通工作。\n（8）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意.\n（10）公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对委托单位安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（10）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（11）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关；\n（12）项目实习生较多，告知其工作岗位存在的安全风险，加强日常安全教育培训，作业中经常性开展安全检查，发现不安全行为，须及时制止和纠正；\n（13）城区及路边水准作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒，特别是夜间水准测量，安全风险高，须做好现场安全监护；\n（14）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（15）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为；\n（16）加强日常用电管理，使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；\n（17）作业区涉及临坎、临边等危险区域作业时，须做好防范措施，严防人员滑倒、摔伤事故发生。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及在建地铁施工场所、城区水准测量、租住房屋消防安全等，安全风险相对较高，项目负责人须结合现场实际，开展隐患排查等工作，发现不安全行为，及时制止和纠正，项目人员多，特别是实习生较多，须加强日常安全监管，经常性开展安全教育培训。', NULL, '2023-12-11', '2024-03-05');
INSERT INTO `cmc_safe` VALUES ('1648881414078988290', '1648881414078988290', 121, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全风险：交通风险、边坡落石、高处坠落、物体打击、起重伤害、机械伤害、坍塌、触电、动植物伤害、临水边测量溺水、高原病、摔倒等安全风险。 \n（三）针对隐患源制定的安全措施：\n（1）测量中心项目地处阿坝州金川县境内，属于高山峡谷地区，作业区域大都在建筑施工区域，安全风险较高，要求项目所有人员高度重视安全生产工作，落实全员安全责任制，加强员工安全意识教育，做好安全技能、安全知识培训及隐患排查治理，严格遵守金川水电站（业主）及公司安全管理规定。\n（2）项目地处高原高海拔地区，由于环境条件艰苦，对员工身体健康情况要求较高，项目负责人须筛查员工身体健康状况，有严重的心脏、肾部、肺部、肝部、高血压等疾病不得参与中心工作。\n（3）目前还处于新冠肺炎疫情防控期，严格遵守属地政府和相关单位疫情防控规定，工作中做好个人防护，维护自身身体健康。\n（4）生产区域(特别是油库、仓库、储存或使用易燃易爆场品场所)禁止吸烟,不准酒后进入生产现场,不准乱动现场的设备和设施,并遵守安全用电规定。\n（5）非工作需要,不许在库区边缘、江边以及山崖和起重吊物下方等处逗留;禁止在防护栏杆、平台和孔洞边缘坐、靠,不得躺在脚手架上或脚手架下方休息。\n（6）施工区域禁止打闹嬉戏，大风、大雨等恶劣天气禁止外业测绘作业。\n（7）遵守生产现场安全警示标示的规定,不得擅自移开或翻越遮拦、围栏进入隔离区域;在噪声控制区或进行产生粉尘的作业,应正确佩戴耳罩、防尘口罩等个人防护用品。\n（8）严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（9）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出差前检查防滑链等应急设备是否齐全。\n（10）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（11）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-12-06', '2022-01-20');
INSERT INTO `cmc_safe` VALUES ('1648881414095765505', '1648881414095765505', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：水下地形测绘溺水、道路交通事故、作业中摔伤砸伤、森林防火、触电、高空坠物、边坡落石、消防安全、新冠肺炎疫情、中毒、斗殴等。 \n（三）针对隐患源制定的安全措施：\n（1）雅砻江桐子林水电站水库泥沙断面测量项目地处攀枝花盐边县，外业测绘中涉及水下地形测绘、控制测量、断面点恢复等，要求项目负责人及参与人员高度重视安全生产工作，落实全员安全责任制，加强员工安全意识教育，作业前做好安全技能、安全知识培训，作业中做好隐患排查治理，并将相关开展情况及时报送至公司专职安全管理员。严格遵守桐子林水电站电厂安全管理规定。\n（2）外业测绘中由于环境条件艰苦，对员工身体健康情况要求较高，作业前项目负责人须筛查参与人员身体健康状况，并查看相关的体检报告，有严重的心脏、肾部、肺部、肝部、高血压等疾病不得参与本次作业。\n（3）各测量小组至少保证两人同行，禁止单独行动，相互保持通讯畅通。\n（4）目前还处于新冠肺炎疫情防控期，严格遵守属地政府和相关单位疫情防控规定，工作中做好个人防护，维护自身身体健康。\n（5）沿交通干线、城镇区域作业时穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底、开展安全培训，工作中经常性安全提醒，确保项目所有人员人身安全。\n (7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。出差（出工）期间驾驶员严禁饮酒。\n（9）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通\n（10）加强森林防火教育培训，遵守属地政府和相关单位森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾。测绘设备部违规充电，大功率电池充电时须有人值守。\n（13）水上作业时，作业人员应穿戴好符合要求的救生衣，船工必须持证上岗，并购买意外伤害保险，如需租用船只开展作业，船只具备相关运营资质，并签订租船协议，船上应配置足够的救生器材。夜间不准使用船只，不能随意搭乘他人。工作人员严禁在库内游泳、戏水、钓鱼，严禁酒后作业。\n（14）岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳。水上作业应穿救生衣，及时观察水域附近情况。\n（15）工作时禁止触碰与工作无关的电气设备。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-12-06', '2023-07-17');
INSERT INTO `cmc_safe` VALUES ('1648881414116737025', '1648881414116737025', 142, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：高原病、森林（草原）火灾、动物伤害、边坡坠物落石、道路交通、消防安全、触电、新冠肺炎疫情、中毒、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于甘孜州理塘境内，属于高原高海拔地区，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，有高血压II期以上肝、肾、肺、心脏等部位有气质性病变的人员不得参与此次测绘项目，工作前请做好参与人员健康筛查，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（3）项目进出场路途较远，要求驾驶员不得疲劳驾驶，长途行车须强制休息，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶等行为。\n（4）本次工作区域道路交通复杂，冬季冰雪道路较多，特别是暗冰路段潜在较多交通安全风险，加强驾驶员冰雪道路警示教育、提醒，建议工作车辆使用越野车。\n（5）测区道路乡村道路较多，路窄车多，路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（6）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备充电时不得违规充电、超长时间充电、大功率设备充电时须有人值守。\n（7）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（8）无人机航测作业前到须到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，起飞前对固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（9）目前正值森林防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（10）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-12-02', '2023-05-18');
INSERT INTO `cmc_safe` VALUES ('1648881414137708545', '1648881414137708545', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：水下地形测绘溺水、道路交通事故、无人机飞行安全风险、作业中摔伤砸伤、森林防火、触电、高空坠物、边坡落石、消防安全、新冠肺炎疫情、中毒、斗殴等。 \n（三）针对隐患源制定的安全措施：\n（1）洼垴水电站修复项目地形图测量项目地处西昌地区，外业测绘中涉及无人机航飞作业、水下地形测绘、控制测量、像控点采集等，要求项目负责人及参与人员高度重视安全生产工作，落实全员安全责任制，加强员工安全意识教育，作业前做好安全技能、安全知识培训，作业中做好隐患排查治理，并将相关开展情况及时报送至公司专职安全管理员。\n（2）外业测绘中由于环境条件艰苦，对员工身体健康情况要求较高，作业前项目负责人须筛查参与人员身体健康状况，并查看相关的体检报告，有严重的心脏、肾部、肺部、肝部、高血压等疾病不得参与本次作业。\n（3）无人机航飞前须到相关部门（单位）报备，得到飞行许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气和极端天气开展作业。无人机起降时设置安全警示区域，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）目前还处于新冠肺炎疫情防控期，严格遵守属地政府和相关单位疫情防控规定，工作中做好个人防护，维护自身身体健康。\n（4）沿交通干线、城镇区域作业时穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底、开展安全培训，工作中经常性安全提醒，确保项目所有人员人身安全。\n (7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。出差（出工）期间驾驶员严禁饮酒。\n（9）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通\n（10）加强森林防火教育培训，遵守属地政府和相关单位森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾。测绘设备部违规充电，大功率电池充电时须有人值守。\n（13）水上作业时，作业人员应穿戴好符合要求的救生衣，船工必须持证上岗，船只具备相关运营资质，船上应配置足够的救生器材。夜间不准使用船只，不能随意搭乘他人。工作人员严禁在库内游泳、戏水、钓鱼，严禁酒后作业.', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本项目涉及水下地形测绘、安全风险高，项目参与人员须高度重视安全生产，作业中穿戴好符合要求的救生衣，本次项目驾驶员还处于试用期，项目负责人在工作中积极监督和管理。', NULL, '2021-12-06', '2023-07-12');
INSERT INTO `cmc_safe` VALUES ('1648881414154485761', '1648881414154485761', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：高原病、溺水、森林（草原）火灾、动物伤害、边坡坠物落石、道路交通、消防安全、触电、新冠肺炎疫情、中毒、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于西藏自治区境内，属于高海拔、高山峡谷地区，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，有高血压II期以上肝、肾、肺、心脏等部位有气质性病变的人员不得参与此次测绘项目，工作前请做好参与人员健康筛查，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）此次涉及无人机航飞测量、地形图调绘、控制测量等，项目部提前做好人员安排，合理安排工作和轮休，结合项目情况开展必要的安全技能和安全知识培训。\n（3）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（4）项目进出场路途较远，一定提醒驾驶员不得疲劳驾驶，长途行车须强制休息，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶等行为。\n（5）藏区冬季冰雪道路较多，特别是暗冰路段潜在较多交通安全风险，加强驾驶员冰雪道路警示教育、提醒。\n（6）测区道路乡村道路较多，路窄车多，路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（6）工作前做好充分准备，提前关注、了解目的地（测区）气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和安全交底。\n（7）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备充电时不得违规充电、超长时间充电、大功率设备充电时须有人值守。\n（8）关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理安排，切记掉以轻心。\n（9）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（10）无人机作业前到须到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，起飞前对固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（11）秋冬季节属于西藏地区森林（草原）防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（12）本次测区属于高原高海拔地区，项目负责人高度重视员工身体健康情况，工作中做好员工身体健康检测，储备必要的防高原病、高原反应药品。\n（13）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（14）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（15）藏区秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（16）因工作需要租用车辆，作业前必须签订租车协议，协议中须明确相关方安全职责，租用车辆证件必须齐全，符合公司车辆安全管理规定。\n（17）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（18）项目实施过程中做好隐患排查治理，面对安全隐患敢于发声，敢于碰硬，对于作业中不安全行为须积极制止，项目安全隐患排查治理须留下相关记录，项目完成后将排查记录抄送至公司综合事务部。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目负责人根据现场实际情况做好隐患排查治理，工作中注意森林防火、消防安全、', NULL, '2021-12-03', '2023-07-12');
INSERT INTO `cmc_safe` VALUES ('1648881414175457281', '1648881414175457281', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：城区道路交通风险、无人机飞行安全风险、作业中摔伤砸伤、消防安全、新冠肺炎疫情、摔伤、砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测绘项目位于广东惠州市城区，外业测绘中涉及无人机等航飞作业、控制测量、像控点采集等，要求项目负责人及参与人员高度重视安全生产工作，加强员工安全意识教育， 工作中做好隐患排查治理。\n（2）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）目前肺炎疫情有所反弹，严格遵守属地政府防控规定，有中高风险旅居史的人员不得参与本次作业。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全\n (7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-11-24', '2023-11-16');
INSERT INTO `cmc_safe` VALUES ('1648881414192234498', '1648881414192234498', 122, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：高原病、森林（草原）火灾、边坡坠物落石、道路交通、消防安全、触电、新冠肺炎疫情、跌倒、摔伤、砸伤等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于两河口水电站库区，属于高海拔、高山峡谷地区，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）本次工作车辆为特顺面包车，防滑性能差，冬季冰雪道路较多，特别是暗冰路段潜在较多交通安全风险，加强驾驶员冰雪道路警示教育、提醒。\n（3）测区道路属于新建库区公路，路窄车多，路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（4）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备充电时不得违规充电、超长时间充电、大功率设备充电时须有人值守，办公室和住宿地做到人离断电。\n（5）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（6）无人机作业前到须到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，起飞前对固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（7）目前正值森林防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（8）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）藏区秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（11）项目实施过程中做好隐患排查治理，面对安全隐患敢于发声，敢于碰硬，对于作业中不安全行为须积极制止，项目安全隐患排查治理须留下相关记录，项目完成后将排查记录抄送至公司综合事务部。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-11-24', '2023-06-29');
INSERT INTO `cmc_safe` VALUES ('1648881414213206018', '1648881414213206018', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：高处坠落、森林火险、消防安全、交通安全、边坡坠物（落石）、作业中摔伤砸伤等\n（二）针对隐患源制定的安全措施：\n（1）目前处于森林防火期，严格遵守属地政府森林防火管理规定、进入林区严禁吸烟、携带火种，更不得随意丢弃烟头。\n（2）项目驾驶员刚入职不久，项目负责人督促严格遵守交通规则，不野蛮驾驶、分心驾驶、疲劳驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养。\n（3）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育，做好隐患排查治理，排查治理情况做好记录。\n（4）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（5）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外.\n（6）测区属于高山峡谷地区，工作中严防边坡落石等地质灾害。\n（7）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（8）时下正值寒冬季节，雾多、霜多、冰雪多、气温低，环境复杂，。注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（9）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（10）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-11-22', '2023-07-12');
INSERT INTO `cmc_safe` VALUES ('1648881414234177537', '1648881414234177537', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：森林（草原）火灾、动物伤害、边坡坠物落石、道路交通、消防安全、新冠肺炎疫情、中毒、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）施测区域属于高山峡谷地区，本次外业测绘涉及无人机飞行、控制测量、像控点测量等，所有项目参与人员保证身体健康，工作前请做好参与人员健康筛查，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）测区道路乡村道路较多，路窄车多，路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（3）工作前做好充分准备，提前关注、了解目的地（测区）气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和安全交底。\n（4）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备充电时不得违规充电、超长时间充电、大功率设备充电时须有人值守。\n（5）关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理安排，切记掉以轻心。\n（6）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（7）无人机作业前到须到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，起飞前对固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（8）目前正值森林防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（11）项目实施过程中做好隐患排查治理，面对安全隐患敢于发声，敢于碰硬，对于作业中不安全行为须积极制止，项目安全隐患排查治理须留下相关记录，项目完成后将排查记录抄送至公司综合事务部。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-11-23', '2023-03-17');
INSERT INTO `cmc_safe` VALUES ('1648881414259343361', '1648881414259343361', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：高原病、溺水、森林（草原）火灾、动物伤害、边坡坠物落石、道路交通、消防安全、触电、新冠肺炎疫情、中毒、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于甘孜州、阿坝州境内，属于高海拔、高山峡谷地区，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，有高血压II期以上肝、肾、肺、心脏等部位有气质性病变的人员不得参与此次测绘项目，工作前请做好参与人员健康筛查，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（3）项目进出场路途较远，要求驾驶员不得疲劳驾驶，长途行车须强制休息，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶等行为。\n（4）本次工作车辆为特顺面包车，防滑性能差，冬季冰雪道路较多，特别是暗冰路段潜在较多交通安全风险，加强驾驶员冰雪道路警示教育、提醒。\n（5）测区道路乡村道路较多，路窄车多，路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（6）工作前做好充分准备，提前关注、了解目的地（测区）气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和安全交底。\n（7）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备充电时不得违规充电、超长时间充电、大功率设备充电时须有人值守。\n（8）关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理安排，切记掉以轻心。\n（9）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（10）无人作业前到须到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，起飞前对固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（11）目前正值森林防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（12）本次测区属于高原高海拔地区，项目负责人高度重视员工身体健康情况，工作中做好员工身体健康检测，储备必要的防高原病、高原反应药品。\n（13）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（14）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（15）藏区秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（16）项目实施过程中做好隐患排查治理，面对安全隐患敢于发声，敢于碰硬，对于作业中不安全行为须积极制止，项目安全隐患排查治理须留下相关记录，项目完成后将排查记录抄送至公司综合事务部。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-11-16', '2023-06-29');
INSERT INTO `cmc_safe` VALUES ('1648881414276120578', '1648881414276120578', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：高原病、溺水、森林（草原）火灾、动物伤害、边坡坠物落石、道路交通、消防安全、触电、新冠肺炎疫情、中毒、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于甘孜州境内，属于高海拔、高山峡谷地区，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，有高血压II期以上肝、肾、肺、心脏等部位有气质性病变的人员不得参与此次测绘项目，工作前请做好参与人员健康筛查，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（3）项目进出场路途较远，要求驾驶员不得疲劳驾驶，长途行车须强制休息，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶等行为。\n（4）本次工作车辆为特顺面包车，防滑性能差，冬季冰雪道路较多，特别是暗冰路段潜在较多交通安全风险，加强驾驶员冰雪道路警示教育、提醒。\n（5）测区道路乡村道路较多，路窄车多，路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（6）工作前做好充分准备，提前关注、了解目的地（测区）气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和安全交底。\n（7）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备充电时不得违规充电、超长时间充电、大功率设备充电时须有人值守。\n（8）关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理安排，切记掉以轻心。\n（9）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（10）无人作业前到须到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，起飞前对固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（11）目前正值森林防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（12）本次测区属于高原高海拔地区，项目负责人高度重视员工身体健康情况，工作中做好员工身体健康检测，储备必要的防高原病、高原反应药品。\n（13）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（14）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（15）藏区秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（16）项目实施过程中做好隐患排查治理，面对安全隐患敢于发声，敢于碰硬，对于作业中不安全行为须积极制止，项目安全隐患排查治理须留下相关记录，项目完成后将排查记录抄送至公司综合事务部。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-11-16', '2023-06-29');
INSERT INTO `cmc_safe` VALUES ('1648881414292897793', '1648881414292897793', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：森林（草原）火灾、边坡坠物落石、道路交通、消防安全、触电、新冠肺炎疫情、中毒、作业中滑倒砸伤等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于金川县境内，高山峡谷地区，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，工作前请做好参与人员健康筛查，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）测区道路乡村道路较多，路窄车多，路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（3）工作前做好充分准备，提前关注、了解目的地（测区）气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和安全交底。\n（4）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备充电时不得违规充电、超长时间充电、大功率设备充电时须有人值守。\n（5）关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理安排，切记掉以轻心。\n（6）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（7）无人机作业前到须到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，起飞前对固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（8）目前正值森林防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（9）本次测区属于高原高海拔地区，项目负责人高度重视员工身体健康情况，工作中做好员工身体健康检测，储备必要的防高原病、高原反应药品。\n（10）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（13）项目实施过程中做好隐患排查治理，面对安全隐患敢于发声，敢于碰硬，对于作业中不安全行为须积极制止，项目安全隐患排查治理须留下相关记录，项目完成后将排查记录抄送至公司综合事务部。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-11-18', '2023-06-29');
INSERT INTO `cmc_safe` VALUES ('1648881414313869314', '1648881414313869314', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：高原病、溺水、森林（草原）火灾、动物伤害、边坡坠物落石、道路交通、消防安全、触电、新冠肺炎疫情、中毒、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于西藏自治区境内，属于高海拔、高山峡谷地区，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，有高血压II期以上肝、肾、肺、心脏等部位有气质性病变的人员不得参与此次测绘项目，工作前请做好参与人员健康筛查，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）此次涉及无人机航飞测量、地形图调绘、控制测量等，项目部提前做好人员安排，合理安排工作和轮休，结合项目情况开展必要的安全技能和安全知识培训。\n（3）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（4）项目进出场路途较远，一定提醒驾驶员不得疲劳驾驶，长途行车须强制休息，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶等行为。\n（5）藏区冬季冰雪道路较多，特别是暗冰路段潜在较多交通安全风险，加强驾驶员冰雪道路警示教育、提醒。\n（6）测区道路乡村道路较多，路窄车多，路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（6）工作前做好充分准备，提前关注、了解目的地（测区）气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和安全交底。\n（7）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备充电时不得违规充电、超长时间充电、大功率设备充电时须有人值守。\n（8）关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理安排，切记掉以轻心。\n（9）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（10）无人作业前到须到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，起飞前对固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（11）秋冬季节属于西藏地区森林（草原）防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（12）本次测区属于高原高海拔地区，项目负责人高度重视员工身体健康情况，工作中做好员工身体健康检测，储备必要的防高原病、高原反应药品。\n（13）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（14）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（15）藏区秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（16）因工作需要租用车辆，作业前必须签订租车协议，协议中须明确相关方安全职责，租用车辆证件必须齐全，符合公司车辆安全管理规定。\n（17）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（18）项目实施过程中做好隐患排查治理，面对安全隐患敢于发声，敢于碰硬，对于作业中不安全行为须积极制止，项目安全隐患排查治理须留下相关记录，项目完成后将排查记录抄送至公司综合事务部。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-11-11', '2023-07-11');
INSERT INTO `cmc_safe` VALUES ('1648881414334840833', '1648881414334840833', 113, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：高原病、溺水、森林（草原）火灾、边坡坠物落石、道路交通、消防安全、触电、新冠肺炎疫情、摔伤、跌倒、滑倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）项目位于甘孜州雅江县，属于高原、高山峡谷地区，本次外业测绘涉及水下地形测量、无人机航飞行及像控点采集等，安全风险较高，所有项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理，测区部分属于瀑布沟水电站区域，提前和电站方、业主方取得联系，得到许可后方可开展作业，严格遵守其安全管理制度。\n（2）水下地形图测绘、断面测量全部采用无人船数据采集，项目参与所有人员穿戴好符合要求的救生衣，人员不得涉水作业，测区岸坡到水边山势陡峭，无人船操作手严防坠落、滑倒等事故发生。\n（3）项目如有相关方参与作业，先签订好安全生产管理协议，明确各自安全职责，作业中做好安全监督管理、安全检查，发现问题及时整改。\n（4）提醒驾驶员不得疲劳驾驶，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶等行为。\n（5）测区乡村道路较多，路窄车多，路上临时停车时，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件.\n（6）提前关注、了解测区气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和班前安全活动。\n（7）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，对测绘设备充电时不得违规充电、超长时间充电。\n（8）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（9）秋冬季节属于森林（草原）防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度。\n（11）项目实施过程中做好隐患排查治理，面对安全隐患敢于发声，敢于碰硬，对于作业中不安全行为须积极制止，项目安全隐患排查治理须留下相关记录，项目完成后将排查记录抄送至公司综合事务部。\n（12）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外.\n（13）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品.\n（14）加强交通安全管理，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶。出差前检查防滑链等应急设备是否齐全。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-11-09', '2023-06-30');
INSERT INTO `cmc_safe` VALUES ('1648881414355812353', '1648881414355812353', 113, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：边坡坠物（落石）、交通风险、无人机飞行安全风险、作业中摔伤砸伤、森林防火、消防安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于雅安石棉县，外业测绘中涉及无人机等航飞作业、控制测量、像控点采集等，要求项目负责人及参与人员高度重视安全生产工作，加强员工安全意识教育， 工作中做好隐患排查治理。\n（2）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）目前肺炎疫情有所反弹，严格遵守属地政府防控规定，有中高风险旅居史的人员不得参与本次作业。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（5）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全\n (7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-11-09', '2023-07-31');
INSERT INTO `cmc_safe` VALUES ('1648881414372589569', '1648881414372589569', 145, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：溺水、森林（草原）火灾、边坡坠物落石、道路交通、消防安全、触电、新冠肺炎疫情、摔伤、跌倒、滑倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）项目位于汉源县乌斯河镇，属于高山峡谷地区，本次外业测绘涉及水下地形测量、无人机航飞行及像控点采集等，安全风险较高，所有项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理，测区部分属于瀑布沟水电站区域，提前和电站方、业主方取得联系，得到许可后方可开展作业，严格遵守其安全管理制度。\n（2）水下地形图测绘、断面测量全部采用无人船数据采集，项目参与所有人员穿戴好符合要求的救生衣，人员不得涉水作业，测区岸坡到水边山势陡峭，无人船操作手严防坠落、滑倒等事故发生。\n（3）项目如有相关方参与作业，先签订好安全生产管理协议，明确各自安全职责，作业中做好安全监督管理、安全检查，发现问题及时整改。\n（4）提醒驾驶员不得疲劳驾驶，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶等行为。\n（5）测区乡村道路较多，路窄车多，路上临时停车时，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（6）提前关注、了解测区气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和班前安全活动。\n（7）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，对测绘设备充电时不得违规充电、超长时间充电。\n（8）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（9）秋冬季节属于森林（草原）防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（10）瀑布沟电站属于无人机飞行严管区域，飞行前需到相关单位报备，得到许可后方可作业，飞行前对无人机各部间两人交叉检查，航线设计符合安全标准。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）因工作需要租用车辆，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全，\n（13）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（14）项目实施过程中做好隐患排查治理，面对安全隐患敢于发声，敢于碰硬，对于作业中不安全行为须积极制止，项目安全隐患排查治理须留下相关记录，项目完成后将排查记录抄送至公司综合事务部。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-11-05', '2023-06-28');
INSERT INTO `cmc_safe` VALUES ('1648881414389366785', '1648881414389366785', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：高原病、溺水、森林（草原）火灾、动物伤害、边坡坠物落石、道路交通、消防安全、触电、新冠肺炎疫情、中毒、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于西藏自治区境内，属于高海拔、高山峡谷地区，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，有高血压II期及肝、肾、肺、心脏等部位有气质性病变的人员不得参与此次测绘项目，工作前请做好参与人员健康筛查，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）此次测绘工作量较大，涉及无人机航飞测量、地形图调绘、控制测量、水下地形测绘等，项目部提前做好人员安排，合理安排工作和轮休，结合项目情况开展必要的安全技能和安全知识培训。\n（3）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（4）项目进出场路途较远，一定提醒驾驶员不得疲劳驾驶，长途行车须强制休息，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶等行为。\n（5）藏区秋冬季冰雪道路较多，特别是暗冰路段潜在较多交通安全风险，加强驾驶员冰雪道路警示教育、提醒。\n（6）测区道路乡村道路较多，路窄车多，路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（6）工作前做好充分准备，提前关注、了解目的地（测区）气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和安全交底。\n（7）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，对测绘设备充电时不得违规充电、超长时间充电。\n（8）关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理安排，切记掉以轻心。\n（9）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（10）无人作业前到须到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，起飞前对固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（11）秋冬季节属于西藏地区森林（草原）防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（12）水下地形测量，全部采用无人船测量，无人船的收放区域必须选在水流平缓部位，且不得单人作业，作业人员穿戴救生衣，在水边线以上安全部位进行遥控操作，不得涉水。\n（13）本次测区属于高原高海拔地区，项目负责人高度重视员工身体健康情况，工作中做好员工身体健康检测，储备必要的防高原病、高原反应药品。\n（14）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（15）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（16）藏区秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（17）因工作需要租用车辆，作业前必须签订租车协议，协议中须明确相关方安全职责，租用车辆证件必须齐全，符合公司车辆安全管理规定。\n（18）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（19）项目实施过程中做好隐患排查治理，面对安全隐患敢于发声，敢于碰硬，对于作业中不安全行为须积极制止，项目安全隐患排查治理须留下相关记录，项目完成后将排查记录抄送至公司综合事务部。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-11-05', '2023-07-11');
INSERT INTO `cmc_safe` VALUES ('1648881414410338305', '1648881414410338305', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：边坡坠物（落石）、交通风险、无人机飞行安全风险、作业中摔伤砸伤、森林防火、消防安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于雅安芦山县，外业测绘中涉及无人机等航飞作业、控制测量、像控点采集等，要求项目负责人及参与人员高度重视安全生产工作，加强员工安全意识教育， 工作中做好隐患排查治理。\n（2）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）目前肺炎疫情有所反弹，严格遵守属地政府防控规定，有中高风险旅居史的人员不得参与本次作业。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（5）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全\n (7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-11-05', '2023-07-15');
INSERT INTO `cmc_safe` VALUES ('1648881414431309825', '1648881414431309825', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：边坡坠物（落石）、交通风险、无人机飞行安全风险、作业中摔伤砸伤、森林防火、消防安全、新冠肺炎疫情、动物伤害等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于云巴中市南江县，外业测绘中涉及无人机等航飞作业、控制测量、像控点采集等，要求项目负责人及参与人员高度重视安全生产工作，加强员工安全意识教育， 工作中做好隐患排查治理。\n（2）无人机航飞作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（5）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全\n (7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、心急、烦躁、等不安全心理因素。\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-11-01', '2023-04-03');
INSERT INTO `cmc_safe` VALUES ('1648881414456475649', '1648881414456475649', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人，', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-10-25', '2023-06-26');
INSERT INTO `cmc_safe` VALUES ('1648881414473252866', '1648881414473252866', 145, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：边坡坠物（落石）、交通事故、火灾、触电、新冠肺炎疫情、中毒、跌倒、高原病等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于甘孜州泸定县境内，高山峡谷地区，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）由于长河坝等地测区较多的公路都是新建，边坡落石较为严重，请提醒大家做好防范。\n（3）乘坐车辆，全员系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）临时占道停车时，在车前后设置警示标志，做好过往车辆行人安全提醒。\n（5）工作前做好充分准备，提前关注、了解目的地（测区）气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和班前安全教育。\n（6）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备不得有违规充电、超长时间充电。\n（7）疫情防控期间做好个人防护，严格遵守当地政府疫情防控各项规定。\n（8）无人机航测作业前到相关部门（单位）进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全警示区域，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（9）目前属于森林防火严管期，严格遵守地方森林草原防灭火要求，严禁野外违规用火，进入林区严禁吸烟。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-10-22', '2023-06-28');
INSERT INTO `cmc_safe` VALUES ('1648881414490030081', '1648881414490030081', 138, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：城区道路交通风险、作业中摔伤砸伤、中毒窒息、触电、消防安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于重庆市区内，属于管网内窥作业、外业测绘中涉及城市道路作业、管网内窥等，安全风险较高、要求项目负责人及参与人员高度重视安全生产工作，加强员工安全意识教育，工作中做好隐患排查治理。\n（2）项目所有人员在作业期间严禁吸烟，工作中严禁携带火种，工作中作业人员穿戴好反光背心，集中注意力，严防踩空坠落事件发生。\n（3） 管网普查时，在作业区域摆放好警示标志，设置警示区域，配置安全人员提醒过往行人、车辆避开作业区域，严防意外事件发生。\n（4）项目租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关，租用车辆第三者责任险不低于50万。\n（5）有限空间作业应当严格遵守“先通风、再检测、后作业”的原则。严禁通风、检测不合格作业。检测指标包括氧浓度、易燃易爆物质（可燃性气体、爆炸性粉尘）浓度、有毒有害气体浓度。检测应当符合相关国家标准或者行业标准的规定。未经通风和检测合格，任何人员不得进入有限空间作业。检测的时间不得早于作业开始前30分钟。\n（6）项目必须配备个人防中毒窒息等防护装备，设置安全警示标志，严禁无防护监护措施作业。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素。\n（8）加强住宿地消防安全管理，在租住的房屋内配置灭火器，注意消防安全，做好室内环境卫生。\n（9）工作中不得随意触碰各种电器设备、带电设施等，不明区域不得盲目冒进。\n（10）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全12）作业人员与外部有可靠的通讯联络，监护人员不得离开作业现场，并与作业人员保持联系。\n（11）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（12）严格《工贸企业有限空间作业安全管理与监督暂行规定》、国家、地方、行业安全生产法律法规及公司安全管理制度', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-10-25', '2023-08-25');
INSERT INTO `cmc_safe` VALUES ('1648881414511001602', '1648881414511001602', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：边坡坠物（落石）、高原病、交通风险、无人机飞行安全风险、作业中摔伤砸伤、森林防火、消防安全、新冠肺炎疫情、动物伤害等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于甘孜州及西藏地区境内，测区属于高原高海拔地区、外业测绘中涉及无人机等航飞作业、像控点采集等，安全风险较高、要求项目负责人及参与人员高度重视安全生产工作，加强员工安全意识教育，工作中做好隐患排查治理。\n（2）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）本项目与其他相关单位合作完成，相关单位需具备此项目测绘作业资格，作业前需签订安全协议，协议中明确相关方安全职责和义务，项目管理人员加强安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（5）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素。\n（7）项目进出场路途遥远，要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过冰雪路面，降低车速，谨慎通行。出差（出工）期间严禁饮酒。\n\n（8）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（9）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-10-19', '2023-06-25');
INSERT INTO `cmc_safe` VALUES ('1648881414527778817', '1648881414527778817', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：道路交通风险、森林火险、临时用工、触电、新冠肺炎疫情、食物中毒、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于乐山地区，施工控制网土建工作中、水准测量等涉及临时用工，请项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）项目驾驶员严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路。\n（3）水准测量、城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒\n（4）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（5）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素。\n（6）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（8）野外工作中有沟、槽、孔、洞，通过湿滑路面时，注意脚下，防止滑倒、摔倒等事故发生。\n（9）施工控制网建网、施测过程需要临时用工时，用工前需每人购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥\n（10）项目如需租用车辆，须签订租车协议，租用车辆须车况良好，第三者责任险须50万以上，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-10-15', '2023-11-16');
INSERT INTO `cmc_safe` VALUES ('1648881414544556034', '1648881414544556034', 142, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/4版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故从业人员死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险（有害）因素有：道路交通、森林火险、林权数据安全、火灾、触电、新冠肺炎疫情、摔伤、跌倒、动物伤害等风险。\n（三）针对隐患源制定的安全措施：\n（1）邻水县重点区域自然资源统一确权登记服务项目，时间较长，工作中涉及与当地政府和群众接触较多，做好沟通、协调、解释工作，避免产生矛盾；\n（2）作业区域属于乡村道路，弯多路窄，当地老乡道路交通意识相对较差，作业人员沿公路作业时做好防护措施，穿戴好反光背心，项目驾驶员选择合理车速，弯道提前鸣号，谨慎驾驶；\n（3）项目车辆做好维护保养，保持良好车况，不得病车上路，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理，驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为；\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入作业区时，小心狗、毒蜂等动物伤害；\n（5）做好测绘成果资料保密、保存工作，特别是确权登记类的项目，纸质版资料较多，存放时间长，安全风险较大，做好消防安全、防潮防腐措施，办公区及资料堆积区严禁吸烟，结合现场实际配置足够数量灭火器，确保测绘资料安全；\n（6）不违规记录、存储、复制和传递项目资料信息，严格遵守《中华人民共和国保守国家秘密法》、《中华人民共和国测绘成果管理条例》、《测绘地理信息管理工作国家秘密范围的规定》、《四川省测绘成果管理办法》、《四川省涉密测绘成果管理规定》和相关保密要求，知悉应当承担的保密义务和法律责任；\n（7）如需与相关方共同开展作业时，应签订安全生产管理协议，明确各自职责与义务，须签订安全生产管理协议，明确各自职责与义务，加强安全生产检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作；\n（8）外业作业时做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理；\n（9）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全；\n（10）项目如需租用车辆，须签订租车协议，明确各自安全职责，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关；\n（11）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；\n（12）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故；\n（13）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；\n（14）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；\n（15）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度、测绘作业安全操作规程；\n（16）目前处于新冠肺炎疫情期间，严格遵守公司疫情防控方案（第三版）和属地政府防控制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2022-08-30', '2022-09-26');
INSERT INTO `cmc_safe` VALUES ('1648881414565527553', '1648881414565527553', 142, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：边坡坠物（落石）、交通风险、无人机飞行安全风险、作业中摔伤砸伤、森林防火、消防安全、新冠肺炎疫情、动物伤害等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于云南屏山县，外业测绘中涉及无人机等航飞作业、控制测量、像控点采集等，要求项目负责人及参与人员高度重视安全生产工作，加强员工安全意识教育， 工作中做好隐患排查治理。\n（2）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（5）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全\n (7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-10-13', '2023-06-13');
INSERT INTO `cmc_safe` VALUES ('1648881414582304770', '1648881414582304770', 20, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：边坡坠物（落石）、高原病、交通风险、无人机飞行安全风险、作业中摔伤砸伤、森林防火、消防安全、新冠肺炎疫情、动物伤害等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于阿坝州境内，测区属于高原高海拔地区、外业测绘中涉及无人机等航飞作业、控制测量、水下地形测绘、像控点采集等，安全风险较高、要求项目负责人及参与人员高度重视安全生产工作，加强员工安全意识教育， 工作中做好隐患排查治理。\n（2）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）本项目与其他相关单位合作完成，相关单位需具备此项目测绘作业资格，作业前需签订安全协议，协议中明确相关方安全职责和义务，项目管理人员加强安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（5）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全\n (7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。出差（出工）期间严禁饮酒。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-10-22', '2023-06-28');
INSERT INTO `cmc_safe` VALUES ('1648881414603276289', '1648881414603276289', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：道路交通风险、森林火险、触电、新冠肺炎疫情、食物中毒、跌倒、高原病等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于西藏羊湖水电站区域，属于高海拔、高山峡谷地区，对作业人员身体健康要求较高，进场前做好人员健康筛查，有严重的心脏、肾部、肺部、肝部、高血压等疾病或医嘱者不得参与此项目，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）严格遵守羊湖水电站各项安全管理规定，穿戴好反光背心等防护用品，工作中不得随意触碰各种电器设备，不酒后开展作业，工作之余不酗酒。\n（3）项目进出场和测区转换路途遥远，涉及简易公路、危险路段、山区路段较多，提醒驾驶员不疲劳驾驶，冒险驾驶。通过危险路段先查看，在确保安全前提下谨慎通过。（4）目前正值秋冬季节，高海拔地区冰雪道路较多，特别是暗冰路段极易造成交通事故，出发前检查好车况，备齐防滑链等车用应急物品。\n（5）秋冬季节也是藏区森林防火严管期，所有人员在林区严禁吸烟、携带火种，更不得野外用火。\n（6）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品（红景天口服液、高原康、葡萄糖口服液等）。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定。\n（7）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（8）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（11）野外工作中有沟、槽、孔、洞，通过湿滑路面时，注意脚下，防止滑倒、摔倒等事故发生。\n（12）施工控制网建网、施测过程需要临时用工时，用工前需每人购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥\n（13）项目如需租用车辆，须签订租车协议，租用车辆须车况良好，第三者责任险须50万以上，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-10-08', '2023-04-04');
INSERT INTO `cmc_safe` VALUES ('1648881414624247809', '1648881414624247809', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：交通风险、高出坠落（落石）、火灾、触电、新冠肺炎疫情、中毒、摔伤、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守并落实与业主签订的安全责任书内容，所有项目参与人员保证身体健康，高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）工作车况必须良好，不得病车上路，要求驾驶员做好出车前、后车况检查。\n（3）乘坐车辆，全员系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）工作中临时占道停车时，在车前后设置警示标志，做好过往车辆行人安全提醒。\n（5）工作前做好充分准备，提前关注、了解目的地（测区）气象、及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和班前安全教育。\n（6）注意住宿地消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备不得有违规充电、超长时间充电。\n（7）疫情期间一定要做好个人防护，严格遵守当地政府管理。\n（8）无人机航测作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（9）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作.\n（10）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-10-08', '2023-11-16');
INSERT INTO `cmc_safe` VALUES ('1648881414641025025', '1648881414641025025', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：高原病、溺水、森林（草原）火灾、动物伤害、边坡坠物落石、道路交通、消防安全、触电、新冠肺炎疫情、中毒、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于西藏自治区林芝地区境内，属于高海拔、高山峡谷地区，本次外业测绘安全风险较高，做好进场前人员健康筛查，有心脏、肾部、肺部、肝部、高血压等疾病和医嘱者不得参与本次作业，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）此次测绘工作量较大，涉及无人机航飞测量、地形图调绘、控制测量等，项目部提前做好人员安排，合理安排工作和轮休，结合项目情况开展必要的安全技能和安全知识培训。\n（3）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（4）项目进出场路途较远，提醒驾驶员不得疲劳驾驶，长途行车须强制休息，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶等行为。\n（5）藏区秋冬季冰雪道路较多，特别是暗冰路段交通安全风险大，加强驾驶员冰雪道路警示教育、提醒。\n（6）测区道路乡村道路较多，路窄车多，路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（7）工作前做好充分准备，提前关注、了解目的地（测区）气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和安全交底。\n（8）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，对测绘设备充电时不得违规充电、超长时间充电。\n（9）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（10）无人机航飞作业前到须到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，起飞前对无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（11）秋冬季节属于西藏地区森林（草原）防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（12）测区存在蚂蝗、蛇等动物伤害，工作中做好防范，项目须储备必要的预防药品。\n（13）本次测区属于高原高海拔地区，储备必要的防高原病、高原反应药品。\n（14）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（15）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（16）藏区秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（17）因工作需要租用车辆，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全，租用船只必须有海事部门颁发的船舶检验证、营运证、船员操作证，方能租用。\n（18）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（19）项目实施过程中做好隐患排查治理，面对安全隐患敢于发声，敢于碰硬，对于作业中不安全行为须积极制止，项目安全隐患排查治理须留下相关记录，项目完成后将排查记录抄送至公司专职安全员。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-09-29', '2024-01-16');
INSERT INTO `cmc_safe` VALUES ('1648881414657802242', '1648881414657802242', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：溺水、森林（草原）火灾、边坡坠物落石、道路交通、消防安全、触电、新冠肺炎疫情、摔伤、跌倒、滑倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于乐山市沙湾区境内，属于高山峡谷地区，本次外业测绘涉及水下地形测绘、水下断面测量等，安全风险较高，所有项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）水下地形图测绘、断面测量全部采用无人船数据采集，项目参与所有人员穿戴好符合要求的救生衣，人员不得涉水作业。\n（3）项目如有相关方参与作业，先签订好安全生产管理协议，明确各自安全职责，作业中做好安全监督管理、安全检查，发现问题及时整改。\n（4）提醒驾驶员不得疲劳驾驶，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶等行为。\n（5）测区乡村道路较多，路窄车多，路上临时停车时，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（6）提前关注、了解测区气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和班前安全活动。\n（7）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，对测绘设备充电时不得违规充电、超长时间充电。\n（8）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（9）秋冬季节属于森林（草原）防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（10）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）因工作需要租用车辆，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全，租用船只必须有海事部门颁发的船舶检验证、营运证、船员操作证，方能租用。\n（13）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（14）项目实施过程中做好隐患排查治理，面对安全隐患敢于发声，敢于碰硬，对于作业中不安全行为须积极制止，项目安全隐患排查治理须留下相关记录，项目完成后将排查记录抄送至公司综合事务部。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-09-29', '2023-07-11');
INSERT INTO `cmc_safe` VALUES ('1648881414674579458', '1648881414674579458', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：森林（草原）火灾、边坡坠物落石、道路交通、消防安全、触电、新冠肺炎疫情、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于石棉县境内，高山峡谷地区，本次外业测绘安全风险较高，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）测区道路乡村道路较多，路窄车多，路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（3）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，对测绘设备充电时不得违规充电、超长时间充电。\n（4）关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理安排，切记掉以轻心。\n（5）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（6）无人机航测作业前到须到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，起飞前对固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（7）秋冬季节属于森林（草原）防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（8）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）项目实施过程中做好隐患排查治理，面对安全隐患敢于发声，敢于碰硬，对于作业中不安全行为须积极制止，项目安全隐患排查治理须留下相关记录，项目完成后将排查记录抄送至公司综合事务部。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-11-22', '2023-06-30');
INSERT INTO `cmc_safe` VALUES ('1648881414695550978', '1648881414695550978', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：边坡落石、道路交通风险、森林火险、触电、新冠肺炎疫情、食物中毒、跌倒、高原病等风险。 \n（三）针对隐患源制定的安全措施：\n（1）本项目由子公司承担，工作前请对你参与人员进行安全交底和必要的安全培训，测区位于甘孜州境内，部分测区属于高海拔、高山峡谷地区，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，有高血压II期及肝、肾、肺、心脏等部位有气质性病变的人员不得参与此次测绘项目，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）高原高海拔地区对作业人员身体健康要求较高，进场前做好人员健康筛查，有以下情况和医嘱者不宜进入高原：严重的心脏、肾部、肺部、肝部、高血压等疾病。\n（3）项目进出场和测区转换路途遥远，涉及简易公路、危险路段、山区路段较多，提醒驾驶员不疲劳驾驶，冒险驾驶。通过危险路段先查看，在确保安全前提下谨慎通过。（4）目前正值秋冬季节，高海拔地区冰雪道路较多，特别是暗冰路段极易造成交通事故，出发前检查好车况，备齐防滑链等车用应急物品。\n（5）秋冬季节也是藏区森林防火严管期，所有人员在林区严禁吸烟、携带火种，更不得野外用火。\n（6）测区住宿条件较差，住宿地做好消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（7）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品（红景天口服液、高原康、葡萄糖口服液等）。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定。\n（8）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（9）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（10）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（13）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-09-23', '2022-03-02');
INSERT INTO `cmc_safe` VALUES ('1648881414712328193', '1648881414712328193', 122, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：边坡落石、道路交通风险、森林火险、触电、新冠肺炎疫情、食物中毒、跌倒、高原病等风险。 \n（三）针对隐患源制定的安全措施：\n（1）本项目由老河口测量中心承担，工作前请对你参与人员进行安全交底和必要的安全培训，测区位于甘孜州境内，测区属于高海拔、高山峡谷地区，本次外业测绘安全风险较高，请项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）测区涉及简易公路、危险路段、山区路段较多，提醒驾驶员不疲劳驾驶，冒险驾驶。通过危险路段先查看，在确保安全前提下谨慎通过。\n（3）目前正值秋冬季节，高海拔地区冰雪道路较多，特别是暗冰路段极易造成交通事故，出发前检查好车况，备齐防滑链等车用应急物品。\n（4）秋冬季节也是藏区森林防火严管期，所有人员在林区严禁吸烟、携带火种，更不得野外用火。\n（5）测区住宿条件较差，住宿地做好消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（6）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品（红景天口服液、高原康、葡萄糖口服液等）。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定。\n（7）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（8）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（9）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（11）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（12）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-09-23', '2023-06-30');
INSERT INTO `cmc_safe` VALUES ('1648881414729105410', '1648881414729105410', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：高处坠落、无人机飞行安全风险、森林火险、消防安全、交通安全、边坡坠物（落石）、防盗等\n（二）针对隐患源制定的安全措施：\n（1）目前处于森林防火期，严格遵守属地政府森林防火管理规定、进入林区严禁吸烟、携带火种，更不得随意丢弃烟头。\n（2）项目驾驶员严格遵守交通规则，不野蛮驾驶、分心驾驶、疲劳驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养。\n（3）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育，做好隐患排查治理，排查治理情况做好记录。\n（4）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（5）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（6）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外.\n（7）测区属于高山峡谷地区，工作中严防边坡落石等地质灾害。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-09-13', '2023-06-26');
INSERT INTO `cmc_safe` VALUES ('1648881414750076930', '1648881414750076930', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高处坠落、高原病、森林（草原）火险、道路交通风险、无人机飞行安全风险、作业中摔伤砸伤、食品安全、住宿地消防安全、边坡落石（坠物）、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目位于西藏地区，测区道路交通、住宿、通信条件都较差，作业中安全风险高，请项目人员从思想上高度重视。\n（2）高原高海拔地区对作业人员身体健康要求较高，进场前做好人员健康筛查，有以下情况和医嘱者不宜进入高原：严重的心脏、肾部、肺部、肝部、高血压等疾病。\n（3）项目进出场路途遥远，涉及简易公路、危险路段、山区路段较多，提醒驾驶员不疲劳驾驶，冒险驾驶。通过危险路段先查看，在确保安全前提下谨慎通过。\n（4）时下正值秋冬季节，高海拔地区冰雪道路较多，特别是暗冰路段极易造成交通事故，出发前检查好车况，备齐防滑链等车用应急物品。\n（5）项目涉及界桩制作、搬运等工作，如果需要临时用工，须先购买人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（5）秋冬季节是森林防火严管期，请大家严格遵守属地政府森林防火规定，所有人员在林区严禁吸烟、携带火种，更不得野外用火，随意丢弃烟头。\n（6）测区住宿条件较差，住宿地做好消防安全、严防电器线路因短路、过负荷、接触不良、爬电等电器火灾，住宿地取暖要特别注意防火、用电安全，测绘仪器设备规范充电、拒绝超长时间充电，大功率电池不得无人值守充电。\n（7）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品（红景天口服液、高原康、葡萄糖口服液等），高寒冷地区储备必要御寒衣服，工作中避免失温等情况发生。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定。\n（8）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机各固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（9）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。避免作出伤害当地民族感情的事情，避免引起民族矛盾、冲突和发生意外。\n（10）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件。\n（13）出工期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出工期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-09-13', '2023-07-11');
INSERT INTO `cmc_safe` VALUES ('1648881414775242753', '1648881414775242753', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高原病、森林（草原）火险、道路交通风险、无人机飞行安全风险、作业中摔伤砸伤、食品安全、住宿地消防安全、边坡落石（坠物）、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及西藏昌都地区三个县（边坝县、洛隆县、丁青县），测区道路交通、住宿、通信条件都较差，作业中安全风险高，请项目人员从思想上高度重视。\n（2）高原高海拔地区对作业人员身体健康要求较高，进场前做好人员健康筛查，有以下情况和医嘱者不宜进入高原：严重的心脏、肾部、肺部、肝部、高血压等疾病。\n（3）项目进出场和测区转换路途遥远，涉及简易公路、危险路段、山区路段较多，提醒驾驶员不疲劳驾驶，冒险驾驶。通过危险路段先查看，在确保安全前提下谨慎通过。（4）目前正值秋冬季节，高海拔地区冰雪道路较多，特别是暗冰路段极易造成交通事故，出发前检查好车况，备齐防滑链等车用应急物品。\n（5）秋冬季节也是藏区森林防火严管期，所有人员在林区严禁吸烟、携带火种，更不得野外用火。\n（6）测区住宿条件较差，住宿地做好消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（7）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品（红景天口服液、高原康、葡萄糖口服液等）。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定。\n（8）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（9）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（10）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（13）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-09-07', '2023-07-11');
INSERT INTO `cmc_safe` VALUES ('1648881414796214274', '1648881414796214274', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-09-02', '2023-06-25');
INSERT INTO `cmc_safe` VALUES ('1648881414812991489', '1648881414812991489', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：边坡坠物（落石）、道路交通风险、住宿地消防安全、触电、新冠肺炎疫情、砸伤、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于绵阳江油境内，属于高山峡谷地区，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）用于项目车辆，车况必须良好，不得病车上路，要求驾驶员做好出车前、后车况检查。\n（3）乘坐车辆，全员系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件工作中如需临时占道停车时，在车辆前后摆放警示标志，设置警示区域，做好过往车辆行人安全提醒。\n（5）工作前做好充分准备，提前关注、了解目的地（测区）气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和班前安全教育。\n（6）注意住宿地消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备不得有违规充电、超长时间充电。\n（8）疫情期间做好个人防护，严格遵守当地政府疫情防控管理规定。\n（9）无人机航测作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，起飞前对各固件两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（10）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。\n(11)严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n(12)工作中结合项目实际情况做好安全隐患排查治理，并做好相关排查治理记录。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-09-02', '2021-10-07');
INSERT INTO `cmc_safe` VALUES ('1648881414880100353', '1648881414880100353', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：交通事故、边坡坠物（落石）、火灾、触电、新冠肺炎疫情、中毒、摔伤、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）作业区域属于高山峡谷地区，所有项目参与人员保证身体健康，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）工作车况必须良好，不得病车上路，要求驾驶员做好出车前、后车况检查。\n（3）乘坐车辆，全员系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）工作中临时占道停车时，在车前后设置警示标志，做好过往车辆行人安全提醒。\n（5）工作前做好充分准备，提前关注、了解目的地（测区）气象、及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和班前安全教育。\n（6）注意住宿地消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备不得有违规充电、超长时间充电。\n（7）提前关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理安排。\n（8）疫情期间一定要做好个人防护，严格遵守当地政府管理。\n（9）无人机航测作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（10）严格遵守地方森林草原防灭火要求，严禁野外违规用火，严禁在林区吸烟。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-08-24', '2023-09-18');
INSERT INTO `cmc_safe` VALUES ('1648881414905266178', '1648881414905266178', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：边坡坠物（落石）、交通事故、火灾、触电、新冠肺炎疫情、中毒、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于泸定县境内，高山峡谷地区，所有项目参与人员保证身体健康，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）项目车辆，车况必须良好，不得病车上路，要求驾驶员做好出车前、后车况检查。\n（3）乘坐车辆，全员系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）临时占道停车时，在车前后设置警示标志，做好过往车辆行人安全提醒。\n（5）工作前做好充分准备，提前关注、了解目的地（测区）气象、及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和班前安全教育。\n（6）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备不得有违规充电、超长时间充电。\n（7）提前关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理安排。\n（8）疫情期间一定要做好个人防护，严格遵守当地政府管理。\n（9）无人机航测作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（10）严格遵守地方森林草原防灭火要求，严禁野外违规用火，严禁在林区吸烟。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-08-24', '2023-06-25');
INSERT INTO `cmc_safe` VALUES ('1648881414926237697', '1648881414926237697', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：高原病、溺水、森林（草原）火灾、动物伤害、边坡坠物落石、道路交通、消防安全、触电、新冠肺炎疫情、中毒、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于西藏自治区林芝地区境内，属于高海拔、高山峡谷地区，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，有高血压II期及肝、肾、肺、心脏等部位有气质性病变的人员不得参与此次测绘项目，工作前请做好参与人员健康筛查，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）此次测绘工作量较大，涉及无人机航飞测量、地形图调绘、控制测量等，项目部提前做好人员安排，合理安排工作和轮休，结合项目情况开展必要的安全技能和安全知识培训。\n（3）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（4）项目进出场路途较远，一定提醒驾驶员不得疲劳驾驶，长途行车须强制休息，乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶等行为。\n（5）藏区秋冬季冰雪道路较多，特别是暗冰路段潜在较多交通安全风险，加强驾驶员冰雪道路警示教育、提醒。\n（6）测区道路乡村道路较多，路窄车多，路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。做好疏导交通。沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，防止发生意外事件\n（6）工作前做好充分准备，提前关注、了解目的地（测区）气象及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识及管控措施，做好员工安全培训和安全交底。\n（7）加强住宿地消防安全管理、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，对测绘设备充电时不得违规充电、超长时间充电。\n（8）关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理安排，切记掉以轻心。\n（9）目前还处于肺炎疫情防控期，严格遵守属地政府疫情防控规定，做好个人防护，服从当地政府管理。\n（10）无人作业前到须到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，起飞前对固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（11）秋冬季节属于西藏地区森林（草原）防火严管期，项目所有人员不得在林区吸烟、携带火种，严格遵守当地政府森林草原防火规定，如有在林区吸烟和携带火种员工，公司将根据安全管理制度顶格处罚。\n（12）测区存在蚂蝗等动物伤害，项目须储备必要的防范药品。\n（13）本次测区属于高原高海拔地区，项目负责人高度重视员工身体健康情况，工作中做好员工身体健康检测，储备必要的防高原病、高原反应药品。\n（14）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（15）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（16）藏区秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（17）因工作需要租用车辆，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全，租用船只必须有海事部门颁发的船舶检验证、营运证、船员操作证，方能租用。\n（18）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（19）项目实施过程中做好隐患排查治理，面对安全隐患敢于发声，敢于碰硬，对于作业中不安全行为须积极制止，项目安全隐患排查治理须留下相关记录，项目完成后将排查记录抄送至公司综合事务部。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-08-27', '2023-01-11');
INSERT INTO `cmc_safe` VALUES ('1648881414951403522', '1648881414951403522', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：边坡落石、道路交通风险、森林火险、触电、新冠肺炎疫情、食物中毒、跌倒、高原病等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于甘孜州境内，部分测区属于高海拔、高山峡谷地区，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，有高血压II期及肝、肾、肺、心脏等部位有气质性病变的人员不得参与此次测绘项目，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（3）乘车时请系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（5）工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底。\n（6）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（7）多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理安排，不要掉以轻心。。\n遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（8）疫情期间一定要做好个人防护，严格遵守当地政府管理，配合亮码、扫码、测温等疫情防控工作。\n（9）无人机航测作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（10）严格遵守地方森林草原防灭火要求，严禁野外违规用火，严禁违规流动吸烟', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-08-28', '2023-09-14');
INSERT INTO `cmc_safe` VALUES ('1648881414976569346', '1648881414976569346', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：边坡坠物（落石）、交通事故、火灾、触电、新冠肺炎疫情、中毒、跌倒风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于绵竹境内，高山峡谷地区，目前正值汛期，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）用于项目车辆，车况必须良好，不得病车上路，要求驾驶员做好出车前、后车况检查。\n（3）乘坐车辆，全员系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）临时占道停车时，在车前后设置警示标志，做好过往车辆行人安全提醒。\n（5）工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和班前安全教育。\n（6）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备不得有违规充电、超长时间充电。\n（7）提前关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理安排。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（8）疫情期间一定要做好个人防护，严格遵守当地政府管理。\n（9）无人机航测作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（10）严格遵守地方森林草原防灭火要求，严禁野外违规用火，严禁在林区吸烟。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-08-16', '2023-07-11');
INSERT INTO `cmc_safe` VALUES ('1648881415001735169', '1648881415001735169', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的安全隐患：边坡落石、交通安全、汛期自然灾害、摔伤、砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目属于配合其他单位进行实物指标调查，工作中做好各方面沟通，协调工作，一定避免发生矛盾。\n（2）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路。\n（3）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（4）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（5）入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，我们要多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排。\n（6）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-08-13', '2023-06-29');
INSERT INTO `cmc_safe` VALUES ('1648881415026900993', '1648881415026900993', 81, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：消防安全、交通安全、边坡落石、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，火灾风险大，务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人，', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-08-13', '2023-05-18');
INSERT INTO `cmc_safe` VALUES ('1648881415047872514', '1648881415047872514', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高原病、汛期自然灾害、交通风险、、无人机飞行安全风险、作业中摔伤砸伤、食品安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于甘孜州道孚县，属于高原地区，作业区域海拔较高，目前又正值汛期，外业测绘中又涉及无人机等航飞作业，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理，项目完成后，并将相关排查记录报送至综合事务部。\n（2）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（5）进入主汛期，雷雨、大风、暴雨等强对流天气频发期，要多关注测区的天气预报、预警，特别是预警信息。发现测区有灾害性天气预警，做好关注的合理安排。遭遇洪涝、滑坡、泥石流等灾害时，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（6）严格遵守属地政府新冠肺炎防控管理规定，减少聚集，勤洗手，减少食用生、冷食物。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）加强车辆维护保养及车内电器线路安全检查，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（11）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（12）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（13）有高血压II期及以上，肝、肾、肺、心脏等部位有气质性病变的人员不得参与此次测绘项目，工作前须对项目人员身体状况进行排查。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-08-17', '2024-04-09');
INSERT INTO `cmc_safe` VALUES ('1648881415064649729', '1648881415064649729', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：边坡坠物（落石）、交通事故、火灾、触电、新冠肺炎疫情、中毒、跌倒风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于雅安市境内，高山峡谷地区，目前正值汛期，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）用于项目车辆，车况必须良好，不得病车上路，要求驾驶员做好出车前、后车况检查。\n（3）乘坐车辆，全员系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）临时占道停车时，在车前后设置警示标志，做好过往车辆行人安全提醒。\n（5）工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和班前安全教育。\n（6）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备不得有违规充电、超长时间充电。\n（7）提前关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理安排。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（8）疫情期间一定要做好个人防护，严格遵守当地政府管理。\n（9）无人机航测作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n严格遵守地方森林草原防灭火要求，严禁野外违规用火，严禁在林区吸烟。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-08-10', '2023-08-10');
INSERT INTO `cmc_safe` VALUES ('1648881415186284546', '1648881415186284546', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：边坡坠物（落石）、交通事故、火灾、触电、新冠肺炎疫情、中毒、跌倒、高原病等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于甘孜州泸定县境内，高山峡谷地区，目前正值汛期，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）由于长河坝等地测区较多的公路都是新建，在雨季边坡落石较为严重，请大家做好防范措施。\n（3）乘坐车辆，全员系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）临时占道停车时，在车前后设置警示标志，做好过往车辆行人安全提醒。\n（5）工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和班前安全教育。\n（6）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备不得有违规充电、超长时间充电。\n（7）多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（8）疫情期间一定要做好个人防护，严格遵守当地政府管理。\n（9）无人机航测作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（10）严格遵守地方森林草原防灭火要求，严禁野外违规用火，严禁违规流动吸烟', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-08-10', '2023-06-29');
INSERT INTO `cmc_safe` VALUES ('1648881415219838978', '1648881415219838978', 49, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：城市交通风险、火灾、触电、新冠肺炎疫情、食物中毒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）本项目作业区域主要在都江堰城镇，交通安全风险较高，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）用于项目车辆，车况必须良好，不得病车上路，要求驾驶员做好出车前、后车况检查。\n（3）乘坐车辆，全员系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）临时占道停车时，在车前后设置警示标志，做好过往车辆行人安全提醒。\n（5)项目实行总监负责制，在监理工作中严格要求施工单位按相关规程、规范开展作业，经常性开展安全检查，并留下痕迹管理。\n（6）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，测绘设备不得有违规充电、超长时间充电。\n（7）疫情期间一定要做好个人防护，严格遵守当地政府管理。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-08-10', '2023-10-08');
INSERT INTO `cmc_safe` VALUES ('1648881415240810497', '1648881415240810497', 94, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：溺水、动物伤害、边坡落石、交通事故、火灾、触电、新冠肺炎疫情、食物中毒、跌倒、高原病等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于甘孜州境内，属于高海拔、高山峡谷地区，目前又正值汛期，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，有高血压II期及肝、肾、肺、心脏等部位有气质性病变的人员不得参与此次测绘项目，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（3）乘车时请系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（5）工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底。\n（6）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（7）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；\n遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（8）疫情期间一定要做好个人防护，严格遵守当地政府管理，配合亮码、扫码、测温等疫情防控工作。\n（9）无人机航测作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（10）严格遵守地方森林草原防灭火要求，严禁野外违规用火，严禁违规流动吸烟', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-08-10', '2023-07-11');
INSERT INTO `cmc_safe` VALUES ('1648881415265976322', '1648881415265976322', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：超高温天气中暑、汛期自然灾害、交通风险、无人机飞行安全风险、作业中摔伤砸伤、食品安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于攀枝花市，目前正值汛期，外业测绘中涉及无人机等航飞作业，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）攀枝花地区今日连续高温橙色预警，请项目负责人合理安排外业测绘时间，提醒大家多饮水，严防中暑和脱水发生。\n（5）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，要多关注测区的天气预报、预警，特别是预警信息。发现测区有灾害性天气预警，做好关注的合理安排。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n(6)各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。\n(7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求项目驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）项目车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-08-03', '2023-07-11');
INSERT INTO `cmc_safe` VALUES ('1648881415286947841', '1648881415286947841', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：边坡落石、高原病、汛期自然灾害、交通风险、、无人机飞行安全风险、作业中摔伤砸伤、食品安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于甘孜州雅江县，属于高海拔地区，目前又正值汛期，外业测绘中又涉及无人机等航飞作业，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）雅江县城以下县道边坡落石严重，特别是在雨季尤为严重，请大家一定合理安排作业时间，谨慎通过。\n（3）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（5）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，要多关注测区的天气预报、预警，特别是预警信息。发现测区有灾害性天气预警，做好关注的合理安排。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n(6)无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n(7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-27', '2023-09-06');
INSERT INTO `cmc_safe` VALUES ('1648881415316307970', '1648881415316307970', 47, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人.', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-27', '2021-11-26');
INSERT INTO `cmc_safe` VALUES ('1648881415333085186', '1648881415333085186', 39, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险：消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人.', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-27', '2023-07-29');
INSERT INTO `cmc_safe` VALUES ('1648881415349862402', '1648881415349862402', 59, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高温中暑、汛期自然灾害、交通风险、、无人机飞行安全风险、作业中摔伤砸伤、食品安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于泸州市境内，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）做好测绘成果资料保密、保存工作 ，特别是确权登记类的项目，纸质版资料较多，存放时间长，安全风险较大，做好消防安全、防潮防腐措施，确保测绘资料安全。\n（3）天气炎热，外业测绘中合理安排作业时间，特别是超高温天气，严防项目人员中暑发生。\n（4）在城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（5）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，要多关注测区的天气预报、预警，特别是预警信息。发现测区有灾害性天气预警，做好关注的合理安排。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n(6)各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。\n(7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-28', '2022-08-03');
INSERT INTO `cmc_safe` VALUES ('1648881415362445314', '1648881415362445314', 59, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高温中暑、汛期自然灾害、交通风险、、无人机飞行安全风险、作业中摔伤砸伤、食品安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于泸州市境内，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）做好测绘成果资料保密、保存工作 ，特别是确权登记类的项目，纸质版资料较多，存放时间长，安全风险较大，做好消防安全、防潮防腐措施，确保测绘资料安全。\n（3）天气炎热，外业测绘中合理安排作业时间，特别是超高温天气，严防项目人员中暑发生。\n（4）在城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（5）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，要多关注测区的天气预报、预警，特别是预警信息。发现测区有灾害性天气预警，做好关注的合理安排。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n(6)各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。\n(7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-28', '2021-12-19');
INSERT INTO `cmc_safe` VALUES ('1648881415375028225', '1648881415375028225', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高原病、汛期自然灾害、交通风险、、无人机飞行安全风险、作业中摔伤砸伤、食品安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于甘孜州新龙县，属于高海拔地区，作业区区域海拔在4000以上，目前又正值汛期，外业测绘中又涉及无人机等航飞作业，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（5）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，要多关注测区的天气预报、预警，特别是预警信息。发现测区有灾害性天气预警，做好关注的合理安排。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n(6)各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。\n(7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-27', '2023-06-26');
INSERT INTO `cmc_safe` VALUES ('1648881415395999745', '1648881415395999745', 15, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：高温中暑、汛期自然灾害、交通风险、、无人机飞行安全风险、作业中摔伤砸伤、食品安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于达州市境内，属于高山峡谷地带，目前又正值汛期，外业测绘中又涉及无人机等航飞作业，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）达州天气炎热，外业测绘中合理安排作业时间，特别是超高温天气，严防项目人员中暑发生。\n（4）在城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（5）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，要多关注测区的天气预报、预警，特别是预警信息。发现测区有灾害性天气预警，做好关注的合理安排。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n(6)各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。\n(7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-26', '2022-01-25');
INSERT INTO `cmc_safe` VALUES ('1648881415412776962', '1648881415412776962', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期自然灾害、交通风险、高温中暑、无人机飞行安全风险、作业中摔伤砸伤、食品安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于乐山老木孔航电枢纽工程，属于高山峡谷地带，目前又正值汛期，外业测绘中又涉及无人机等航飞作业，要求项目负责人及参与人员高度重视安全生产工作，工作中做好隐患排查治理。\n（2）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，无人机固件须两人交叉检查，航线设计须满足相关规范要求并达到安全标准。\n（3）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（4）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（5）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，我们要多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n(6)野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。\n(7)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、逞能、莽撞、心急、烦躁、等不安全心理因素。\n（8）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（9）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（10）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-26', '2023-06-29');
INSERT INTO `cmc_safe` VALUES ('1648881415429554178', '1648881415429554178', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：汛期自然灾害、新冠肺炎疫情、交通安全、边坡落石、消防安全、高原病等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于甘孜州雅江县，属于高山峡谷地区，目前正值汛期，项目涉及无人机飞行测量，安全风险较高，请项目人员高度重视安全生产工作。\n（2）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，我们要多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（3）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。\n（4）无人作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（5）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（6）目前处于肺炎疫情防控期，，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发热、咳嗽等症状规范就医。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素。\n（8）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（9）要求驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（10）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-26', '2023-03-17');
INSERT INTO `cmc_safe` VALUES ('1648881415446331394', '1648881415446331394', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的危险源及安全风险：汛期自然灾害、交通风险、高温中暑、无人机飞行安全风险、作业中摔伤砸伤、食品安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）本次项目位于西昌官地水电站，属于高山峡谷地带，目前又正值汛期，外业测绘中又涉及无人机等航飞作业，要求项目参与人员高度重视安全生产工作。\n（2）无人机作业前须到相关部门报备，得到飞行许可后方可开展作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（3）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路。\n（4）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（5）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（6）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，我们要多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n(7)野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。\n(8)项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素。\n(9)要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n(10)加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-20', '2023-07-10');
INSERT INTO `cmc_safe` VALUES ('1648881415458914305', '1648881415458914305', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：水边作业溺水、无人机飞行风险、交通事故、火灾、触电、新冠肺炎疫情、中毒、中暑、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）无人机作业前必须到相关部门进行飞行前报备、报批，得到许可后方可开展作业，严格遵守《无人机航摄安全作业基本要求》，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（2）目前处于汛期，测区天气炎热，温差较大，做好防中暑、防晒等工作，进场前购买藿香正气液，风油精等防中暑药品，建议大家夏季适当多饮水。\n（3）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（5）工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底。\n（6）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（7）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，我们要多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；\n遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（8）疫情期间一定要做好个人防护，服从当地政府管理。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（10）水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-14', '2023-08-10');
INSERT INTO `cmc_safe` VALUES ('1648881415475691522', '1648881415475691522', 32, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：无人机飞行风险、交通事故、火灾、触电、新冠肺炎疫情、中毒、中暑、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（2）目前处于汛期，测区天气炎热，温差较大，做好防中暑、防晒等工作，进场前购买藿香正气液，风油精等防中暑药品，建议大家夏季适当多饮水。\n（3）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（5）工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底。\n（6）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（7）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，我们要多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；\n遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（8）疫情期间一定要做好个人防护，服从当地政府管理。\n（9）无人机作业前必须到相关部门进行飞行前报备、报批，得到许可后方可开展作业，严格遵守《无人机航摄安全作业基本要求》，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-13', '2023-06-26');
INSERT INTO `cmc_safe` VALUES ('1648881415492468738', '1648881415492468738', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（一）本项目存在的安全风险：高原高海拔地区作业高原病、交通安全、雨季边坡落石坠物、住宿地消防安全、少数民族地区民族矛盾、新冠肺炎疫情、作业中摔伤砸伤、作业人员安全意识淡薄、项目负责人违章指挥、高温中暑、主汛期洪水，泥石流伤害等。 \n（二）针对隐患源制定的安全措施：\n（1）本次施工控制网测量项目处于甘孜州高海拔地区，所有参与人员身体健康，有高血压II期以上及心、肺、肾等部位无器质性病变等不得参与项目作业。工作中注意劳逸结合，避免高原病发生。\n（2）当前正值主汛期，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。合理安排作业，遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（3）出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（5）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。\n（6）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（7）施工控制网建网、施测过程需要临时用工时，用工前需每人购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥.。\n（8）注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-14', '2022-04-04');
INSERT INTO `cmc_safe` VALUES ('1648881415513440258', '1648881415513440258', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的危险源及安全风险: 触电、消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人，', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-13', '2021-09-09');
INSERT INTO `cmc_safe` VALUES ('1648881415530217473', '1648881415530217473', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：汛期交通安全、边坡落石、消防安全、泥石流、洪水等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于甘孜州，属于高山峡谷地带，目前处于汛期，外业测绘工作安全风险高，项目参与人员在思想上高度重视，提高安全意识。\n（2）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（3）无人作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（4）项目临时住所要做好防火灾、防雷电、防雨水、防盗工作，预防因长时间使用大负荷电器导致线路过热引起火灾，如空调、电风扇、灭蚊器等。做到人离开关闭门窗、切断电器电源。\n（5）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（6）外业工作要预防中暑和晒伤，配备防暑药品，做好新冠肺炎疫情防控，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物。外业工作中配备安全设备和药品，预防犬、毒蜂、蛇等动物伤害。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素。\n（8）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（9）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（10）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-09', '2023-08-09');
INSERT INTO `cmc_safe` VALUES ('1648881415551188994', '1648881415551188994', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：动物伤害、边坡坠物、交通事故、火灾、触电、新冠肺炎疫情、中毒、中暑、跌倒等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于雅安市石棉县，属于高山峡谷地带，目前处于汛期，外业测绘工作安全风险高，项目参与人员在思想上高度重视，提高安全意识。\n（2）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（3）无人作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（4）项目临时住所要做好防火灾、防雷电、防雨水、防盗工作，预防因长时间使用大负荷电器导致线路过热引起火灾，如空调、电风扇、灭蚊器等。做到人离开关闭门窗、切断电器电源。\n（5）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（6）外业工作要预防中暑和晒伤，配备防暑药品，做好新冠肺炎疫情防控，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物。外业工作中配备安全设备和药品，预防犬、毒蜂、蛇等动物伤害。\n（7）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素。\n（8）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（9）要求公司驾驶员遵章守纪，不疲劳驾驶、超速行驶、分心驾驶；外业测绘中不明路况、危险路段，不冒险前行；通过积水路面，降低车速，谨慎通行。公司所有专职驾驶员出差（出工）期间严禁饮酒。\n（10）加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机、气雾清新剂、灌装油漆、碳酸饮料等易燃易爆物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（11）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（12）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-05', '2023-08-25');
INSERT INTO `cmc_safe` VALUES ('1648881415567966210', '1648881415567966210', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：溺水、动物伤害、边坡坠物、交通事故、火灾、触电、新冠肺炎疫情、中毒、中暑、跌倒、高原病等风险。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于甘孜州白玉县境内，属于高海拔、高山峡谷地区，目前又正值汛期，本次外业测绘安全风险较高，所有项目参与人员保证身体健康，有高血压II期及肝、肾、肺、心脏等部位有气质性病变的人员不得参与此次测绘项目，请各项目参与人员高度重视安全生产工作，心存敬畏之心，杜绝侥幸心理。\n（2）目前处于汛期，测区天气炎热，温差较大，做好防中暑、防晒等工作，进场前购买藿香正气液，风油精等防中暑药品，建议大家夏季适当多饮水。\n（3）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（4）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（5）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（6）工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底。\n（7）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（8）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，我们要多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；\n遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（9）疫情期间一定要做好个人防护，服从当地政府管理。\n（10）无人作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（11）严格遵守地方森林草原防灭火要求，严禁野外违规用火，严禁违规流动吸烟。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-07-01', '2023-06-28');
INSERT INTO `cmc_safe` VALUES ('1648881415588937730', '1648881415588937730', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件.\n（二）本项目存在的安全隐患：溺水、交通安全、边坡落石坠物、消防安全、摔伤、砸伤、新冠肺炎疫情、临时用工安全等风险。 \n（三）针对隐患源制定的安全措施：\n（1）项目如需临时用工，须签订用工安全协议，作业前针对临时用工作业特别开展安全教育培训，作业中常常安全提醒，临时用工人员购买意外伤害保险。\n（2）目前处于汛期，测区天气炎热，做好防中暑、防晒等工作，进场前购买藿香正气液，风油精等防中暑药品，建议大家夏季适当多饮水。\n（3）公路控制测量、水准测量涉及公路边作业较多，请做好安全防护，穿戴好反光背心。\n（4）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（5）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（6）工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底。\n（7）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（8）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，我们要多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；\n遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（9）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。\n（10）无人作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-06-28', '2023-07-12');
INSERT INTO `cmc_safe` VALUES ('1648881415609909250', '1648881415609909250', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目存在的安全隐患：火灾、交通事故、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，请务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-06-23', '2024-04-07');
INSERT INTO `cmc_safe` VALUES ('1648881415630880769', '1648881415630880769', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n\n（二）本项目存在的安全隐患：动物伤害、新冠肺炎疫情、交通事故、火灾、中暑、高空坠物、跌倒等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于雅安市石棉县，属于高山峡谷地带，目前处于汛期，外业测绘工作安全风险高，项目参与人员在思想上高度重视，提高安全意识。\n（2）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，我们要多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（3）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。\n（4）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。。\n（5）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（6）目前处于肺炎疫情防控期，，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发热、咳嗽等症状规范就医。\n（7）出工中注意住宿地消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，无人机充电时须有人值守，不得违规充电。\n（8）测区道路复杂，很多属于简易公路、废弃公路，请驾驶员绷紧安全驾驶这根弦，不明路段、危险路段一定先下车查看，在确保安全的前提下谨慎通过。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-06-23', '2023-07-10');
INSERT INTO `cmc_safe` VALUES ('1648881415647657985', '1648881415647657985', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目存在的安全隐患：火灾、交通事故、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，请务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-06-23', '2023-02-07');
INSERT INTO `cmc_safe` VALUES ('1648881415668629506', '1648881415668629506', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n\n（二）本项目存在的安全隐患：新冠肺炎疫情、交通安全、边坡落石、消防安全、泥石流、洪水等。 \n（三）针对隐患源制定的安全措施：\n（1）测区位于雅安市石棉县，属于高山峡谷地带，目前处于汛期，外业测绘工作安全风险高，项目参与人员在思想上高度重视，提高安全意识。\n（2）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，我们要多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（3）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩。\n（4）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。。\n（5）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（6）目前处于肺炎疫情防控期，，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发热、咳嗽等症状规范就医。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-06-03', '2023-07-10');
INSERT INTO `cmc_safe` VALUES ('1648881415685406721', '1648881415685406721', 33, 58, '（1）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（2）作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的安全隐患：消防安全、交通安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）近期广东等地疫情有所抬头，请做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人，', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-06-02', '2022-09-16');
INSERT INTO `cmc_safe` VALUES ('1648881415706378241', '1648881415706378241', 47, 58, '（1）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（2）作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的安全隐患：消防安全、交通安全、新冠肺炎疫情等。 \n（三）针对隐患源制定的安全措施：\n（1）近期广东等地疫情有所抬头，请做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人，', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-06-02', '2021-11-26');
INSERT INTO `cmc_safe` VALUES ('1648881415727349761', '1648881415727349761', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的安全隐患：溺水、交通安全、边坡落石坠物、消防安全、摔伤、砸伤、无人机飞行安全风险等。 \n（三）针对隐患源制定的安全措施：\n（1）本次测绘工作在铜街子和龚嘴水电站区域，作业前须和相关单位取得联系，办理工作票，并严格遵守其安全管理规章制度。\n（2）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等。\n（3）工作现场禁止吸烟，野外作业禁止携带火种。\n（4）大风、雷电、暴雨等极端天气恶劣天气时禁止作业。\n（5）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（6）水上作业和水边作业必须穿戴好救生衣，进入工区必须佩戴安全帽。\n（7）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故，特别是无人船和无人机充电时要严防电器火灾事故。\n（8）本项目涉及水下地形测量，测绘人员作业前需得到相关单位的同意后，方可开展作业，水边点测量尽可能避免人工水边立尺，所有临水边测绘作业人员需穿戴好救生衣。\n（9）作业前须办理相关飞行许可，方可开展无人机飞行作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（10）当前正值每年汛期，入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，我们要多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-05-25', '2023-08-09');
INSERT INTO `cmc_safe` VALUES ('1648881415748321281', '1648881415748321281', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边坡落石、森林防火、消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）本次测绘项目大都在康定境内，山区道路多，测区下午风较大，目前处于森林防火期森林火险较高。\n（2）工作中提醒驾驶员山区道路行驶注意边坡落石，谨慎驾驶，不得超速行驶，乡村道路路况不明时，不盲目冒进，项目车辆年限较长，对影响安全的方向、刹车等关键部位，加强维护保养，驾驶员不得带情绪开车，开英雄车，不得酒后驾驶。\n（3）无人机飞行前报备相关单位（部门），选择合适天气，不冒险飞行，作业前保证无人机各部件完好，两人交叉检查，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（5）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾,要求项目部所有人员离开宿舍和办公室关闭电源，特别是大功率烤火设备一定做到人离断电。\n（6）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（7）因工作需要租用车辆时，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全，并提前报备公司综合事务部。\n（8）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-05-22', '2021-11-13');
INSERT INTO `cmc_safe` VALUES ('1648881415765098497', '1648881415765098497', 20, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的安全隐患：交通安全、消防安全、机械伤害、汛期自然灾害等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（2）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为。\n（3）出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾。\n（4）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（5）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育。\n（6）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（7）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-05-14', '2021-11-22');
INSERT INTO `cmc_safe` VALUES ('1648881415781875714', '1648881415781875714', 142, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。 \n（二）针对隐患源制定的安全措施：高原病、新冠肺炎疫情、边坡落石、交通安全、消防安全、森林防火等\n（1）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（2）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（3）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（4）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（5）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（6）目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。\n（7）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作.\n(8)出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-05-14', '2021-11-02');
INSERT INTO `cmc_safe` VALUES ('1648881415798652929', '1648881415798652929', 20, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。 \n（二）针对隐患源制定的安全措施：高原病、新冠肺炎疫情、边坡落石、交通安全、消防安全、森林防火等\n（1）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（2）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（3）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（4）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（5）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（6）目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。\n（7）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作.\n(8)出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意\n（9）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-05-14', '2023-09-06');
INSERT INTO `cmc_safe` VALUES ('1648881415815430146', '1648881415815430146', 138, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '安全生产与职业健康要求\n（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：交通风险、高处坠落、物体打击、起重伤害、机械伤害、坍塌、电气伤害、摔倒等安全风险等。 \n（三）针对隐患源制定的安全措施：\n（1）项目部须结合地铁施工现场实际情况制定监测作业安全操作规程、安全生产责任制，建立项目安全组织机构，与公司和项目员工签订安全生产责任书。\n（2）现场作业时，必须遵守业主及相关单位安全、技术操作规程，穿戴好相应的劳动安全防护用具，注意人身和仪器的安全，禁止冒险作业。\n（3）作业中佩戴好安全帽、反光背心、手套、安全带、安全绳等安全设备和增加防护措施，注意作业区上部滚石、高空坠物等。\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与现场施工人员或管理人员取得联系。作业应佩戴必要的安全防护用品和通讯设施，作业时注意洞顶物件坠落、坍塌、渗（漏）水等情况。若发现重金属、有害气体等危险物质，应立即停止作业，撤出洞内，并及时报告。\n（5）有限空间作业应当严格遵守“先通风、再检测、后作业”的原则。严禁通风、检测不合格作业。检测指标包括氧浓度、易燃易爆物质（可燃性气体、爆炸性粉尘）浓度、有毒有害气体浓度。检测应当符合相关国家标准或者行业标准的规定。未经通风和检测合格，任何人员不得进入有限空间作业。检测的时间不得早于作业开始前30分钟。。\n（6）严禁触碰施工现场电气设备，进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（7）项目在作业中尽可能避免交叉作业、并行作业，如确须交叉、并行作业，须制定安全措施，作业前和相关作业单位做好联系、沟通工作。\n（8）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生.\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意.\n（10）公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对委托单位安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作.。（10）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（11）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-05-07', '2023-08-25');
INSERT INTO `cmc_safe` VALUES ('1648881415832207361', '1648881415832207361', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一））本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：交通安全、消防安全、森林防火、消防安全、边坡落石、摔伤、砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及测绘控制点土建工作，工作中防范在搬运物品时摔伤、砸伤。\n（2）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（3）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（4）施工控制网建网、施测过程需要临时用工时，用工前需每人购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥。\n（5）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查。\n（6）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（7）大风、雷电、暴雨等恶劣天气时禁止作业。\n(8)路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-05-04', '2023-06-28');
INSERT INTO `cmc_safe` VALUES ('1648881415844790273', '1648881415844790273', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一））本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：交通安全、消防安全、森林防火、消防安全、边坡落石、摔伤、砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（2）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（3）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（4）项目需要临时用工时，用工前需每人购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥。\n（5）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查。\n（6）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（7）大风、雷电、暴雨等恶劣天气时禁止作业。\n  (8)路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通\n（9）无人机航测前到相关单位进行报备，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（10）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。\n（11）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-05-04', '2021-08-27');
INSERT INTO `cmc_safe` VALUES ('1648881415861567490', '1648881415861567490', 139, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：无人机飞行安全风险、森林火险、消防安全、交通安全、边坡坠物（落石）、防盗、防动物伤害等。\n（三）针对隐患源制定的安全措施：\n（1）本项目涉及水下地形和水边线测量，安全风险较高，水边线测量和无人船操作人员必须穿戴好救生衣。\n（2）除收放测量船外，其他时间作业人员禁止靠近水边。\n（3）测量期间，如遇坝身泄洪或水位异常变化，人员和设备应立即撤离至安全地带。\n（4）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等。\n（5）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路。\n（6）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育。\n（7）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（8）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（9）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（10）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-04-25', '2023-07-10');
INSERT INTO `cmc_safe` VALUES ('1648881415878344705', '1648881415878344705', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '（一）本项目存在的安全隐患：森林防火、高原病、交通安全、消防安全、动植物伤害、摔倒、砸伤等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于西藏林芝地区，工作前参与人员进行身体健康检查，有高血压（III期以上）或者心、肺、肝等部位器质性病变的员工不得参与此次工作。\n（2）项目须储备必要的防高原病药物，工作中预防蚊虫等叮咬。\n（3）在地形图调绘作业时，涉及城镇、公路边作业，要求所有人员穿戴好反光背心，注意交通安全，避让过往车辆。\n（4）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（5）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（6）进出工地路途较远，特别是318国道“怒江七十拐、老虎嘴”等地段，道路交通复杂，请提醒驾驶员谨慎驾驶，测区涉及乡村道路较多，须控制合理车速。\n(7)出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故发生，特别是测绘设备在充电时，做到人离断电。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-05-04', '2023-08-19');
INSERT INTO `cmc_safe` VALUES ('1648881415895121921', '1648881415895121921', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '1)本项目存在的安全隐患：新冠肺炎疫情、溺水、交通风险、边坡坠物、动植物伤害、物体打击、坍塌、食物中毒、消防安全、森林火险、摔伤、砸伤等。 \n2) 针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）路边作业穿戴好反光背心等劳动防护用品，项目驾驶员养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n (3) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (4) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定.\n（6）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n（7）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（8）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（9）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（10）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生\n（11）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-05-22', '2024-02-26');
INSERT INTO `cmc_safe` VALUES ('1648881415911899138', '1648881415911899138', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/3版本体系文件的相关规定。', '1)本项目存在的安全隐患：新冠肺炎疫情、溺水、交通风险、边坡坠物、动植物伤害、物体打击、坍塌、食物中毒、消防安全、森林火险、摔伤、砸伤等。 \n2) 针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）路边作业穿戴好反光背心等劳动防护用品，项目驾驶员养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n (3) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (4) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定.\n（6）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n（7）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（8）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（9）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（10）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生\n（11）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-05-22', '2023-07-10');
INSERT INTO `cmc_safe` VALUES ('1648881415932870657', '1648881415932870657', 145, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的安全隐患：机械伤害、森林防火、边坡落石、交通安全、消防安全等。 \n（三）针对隐患源制定的安全措施：\n（1）项目地处甘孜州姑咱镇，属于高山峡谷地带，交通风险、森林防火风险较高。\n（2）高山峡谷地区驾车，提醒项目驾驶员遵章守纪，合理控制车速，不明路段不盲目通行。\n（3）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（4）进入工地，不得携带火种，严禁在工地现场吸烟。作业中佩戴好安全防护用具，与施工机械保持安全距离。进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（5）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全。\n（6）大风、雷电、暴雨等恶劣天气时禁止作业。\n（7）工作时禁止触碰与工作无关的电气设备\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-04-19', '2024-04-19');
INSERT INTO `cmc_safe` VALUES ('1648881415949647874', '1648881415949647874', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边坡落石、交通安全、森林防火、消防安全等。 \n（二）针对隐患源制定的安全措施：\n（1）此项目属于配合其他单位实物指标配合测量，工作中做好相关单位人员协调、沟通工作。\n（2）严格遵守永善县政府安全管理规定、森林防火管理制度，进入林区不得吸烟，不得带火种进入测区。\n（3）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（4）严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度、测绘作业安全操作规程及当地政府新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（5）加强交通安全管理，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为。\n\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-04-19', '2023-06-29');
INSERT INTO `cmc_safe` VALUES ('1648881415962230785', '1648881415962230785', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：森林防火、交通安全、消防安全、摔伤、砸伤及动植物伤害等。 \n（二）针对隐患源制定的安全措施：\n（1）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定，对于不遵守森林防火规定的员工，公司将严肃处理。\n（2）出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故发生，。\n（3）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（4）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（5）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路。\n（6）水上作业和水边作业必须穿载救生衣，进入工区必须佩戴安全帽。\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（8）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-04-19', '2023-07-10');
INSERT INTO `cmc_safe` VALUES ('1648881415979008002', '1648881415979008002', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一））本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。\n（二）本项目存在的安全隐患：交通安全、消防安全、森林防火、消防安全、边坡落石、摔伤、砸伤等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目涉及测绘控制点土建工作，工作中防范在搬运物品时摔伤、砸伤。\n（2）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（3）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（4）施工控制网建网、施测过程需要临时用工时，用工前需每人购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥。\n（5）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查。\n（6）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（7）大风、雷电、暴雨等恶劣天气时禁止作业。\n(8)路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-04-19', '2023-03-17');
INSERT INTO `cmc_safe` VALUES ('1648881415991590913', '1648881415991590913', 39, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件\n（二）本项目存在的安全隐患：无人机飞行风险、森林防火、消防安全、交通安全等。 \n（三）针对隐患源制定的安全措施：\n（1）本项目实际测绘作业主要是无人机飞行，飞行前须到相关部门（单位）进行飞行报备，得到许可后方能开展作业。\n（2）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（3）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒。\n（4）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（5）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路，特别是本测区实际乡村道路较多，道路交通安全风险较高，提醒项目驾驶员合理控制车速。\n（6）野外工作中有沟、槽、孔、洞，通过湿滑路面时，注意脚下，防止滑倒、摔倒等事故发生。\n（四）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-04-19', '2023-03-17');
INSERT INTO `cmc_safe` VALUES ('1648881416012562433', '1648881416012562433', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：森林防火、高原病、交通安全、消防安全、动植物伤害、摔倒、砸伤等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于西藏林芝地区，工作前参与人员进行身体健康检查，有高血压（III期以上）或者心、肺、肝等部位器质性病变的员工不得参与此次工作。\n（2）项目须储备必要的防高原病药物，工作中预防蚊虫等叮咬。\n（3）在地形图调绘作业时，涉及城镇、公路边作业，要求所有人员穿戴好反光背心，注意交通安全，避让过往车辆。\n（4）直升机航飞时提醒机组人员选择合适天气，遵守航飞规程规范，不得违章作业，冒险飞行，特别是大风天气不得违规作业。\n（5）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（6）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（7）进出工地路途较远，特别是318国道“怒江七十拐、老虎嘴”等地段，道路交通复杂，请提醒驾驶员谨慎驾驶，测区涉及乡村道路较多，须控制合理车速。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-04-16', '2021-08-16');
INSERT INTO `cmc_safe` VALUES ('1648881416029339649', '1648881416029339649', 139, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：无人机飞行安全风险、森林火险、消防安全、交通安全、边坡坠物（落石）、防盗、防动物伤害等。\n（三）针对隐患源制定的安全措施：\n（1）本项目涉及水下地形和水边线测量，安全风险较高，水边线测量和无人船操作人员必须穿戴好救生衣。\n（2）除收放测量船外，其他时间作业人员禁止靠近水边。\n（3）测量期间，如遇坝身泄洪或水位异常变化，人员和设备应立即撤离至安全地带。\n（4）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等。\n（5）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路。\n（6）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育。\n（7）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（8）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（9）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（10）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（11）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-04-14', '2023-09-19');
INSERT INTO `cmc_safe` VALUES ('1648881416046116866', '1648881416046116866', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关电子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-04-14', '2021-12-06');
INSERT INTO `cmc_safe` VALUES ('1648881416062894082', '1648881416062894082', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：森林火险、消防安全、交通安全、边坡坠物（落石）、防盗、防动物伤害等\n（二）针对隐患源制定的安全措施：\n（1）作业前做好安全防护用品、急需的野外作业的应急药品的准备。\n（2）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路。\n（3）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育。\n（4）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-04-14', '2021-11-13');
INSERT INTO `cmc_safe` VALUES ('1648881416083865601', '1648881416083865601', 120, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：森林火险、消防安全、交通安全、边坡坠物（落石）等\n（二）针对隐患源制定的安全措施：\n（1）项目车辆年限超过10年，提醒驾驶员做好车辆维护保养，施工区施工车辆、机械较多，不超速行驶，合理避让。\n（3）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育。\n（4）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（5）不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（7）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-04-14', '2021-07-20');
INSERT INTO `cmc_safe` VALUES ('1648881416100642818', '1648881416100642818', 138, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边坡落石、交通安全、消防安全等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于乐山市境内，本次外业测绘工作主要是控制点采集等，要求在公路边控制点采集时穿戴好反光背心，注意防范过往车辆行人，做好警示防范措施。\n（2）提醒项目驾驶员在山区道路降低车速，不超速行驶，疲劳驾驶。\n（3）如有临水边作业要求项目所有参与人员穿戴好救生衣。\n（4）工作中注意防滑、摔倒，特别是在岸坡、河边行走时提醒作业人员提高注意力。\n（5）严格遵守《安全生产法》、《测绘作业人员安全规范等国家法律、法规、标准和公司有关安全生产规章制度\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-04-14', '2023-05-18');
INSERT INTO `cmc_safe` VALUES ('1648881416117420033', '1648881416117420033', 122, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：无人机飞行安全风险、疫情防控、森林火险、消防安全、交通安全、边坡坠物（落石）等。\n（二）针对隐患源制定的安全措施：\n（1）严格遵守两河口建设管理局相关安全管理规定，作业前做好安全防护用品、测绘设备的准备。\n（2）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路,两河口库区道路属于新修建道路，边坡落石较为严重，通过危险路段时，观察通行。\n（3）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育。\n（4）加强森林防火教育培训，遵守雅江县和道孚县政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（5）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（6）野外工作中有沟、槽、孔、洞，边坡时通过湿滑路面时，注意脚下，防止滑倒、摔倒等事故发生。\n（7）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（8）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-03-29', '2023-06-30');
INSERT INTO `cmc_safe` VALUES ('1648881416130002945', '1648881416130002945', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：无人机飞行安全风险、森林火险、消防安全、交通安全、边坡坠物（落石）、防盗、防动物伤害等\n（二）针对隐患源制定的安全措施：\n（1）作业前做好安全防护用品、急需的野外作业的应急药品的准备。\n（2）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路。\n（3）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育。\n（4）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（8）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-03-29', '2023-07-12');
INSERT INTO `cmc_safe` VALUES ('1648881416146780162', '1648881416146780162', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目安全生产工作目标：确保生产安全事故职工死亡率、重伤率为零；不发生负主责的一般及以上交通事故；不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；不发生一般及以上突发环境事件。。 \n（二）本项目存在的主要安全隐患：无人机飞行安全风险、森林火险、消防安全、交通安全、边坡坠物（落石）、防盗、防动物伤害等\n（二）针对隐患源制定的安全措施：\n（1）作业前做好安全防护用品、急需的野外作业的应急药品的准备。\n（2）驾车出行时，严格遵守交通规则，不野蛮驾驶，对测区及出行路况、天气提前了解，做好车辆维护保养，不病车上路。\n（3）加强现场作业人员日常安全教育培训，结合项目实际情况积极开展班前安全教育。\n（4）加强森林防火教育培训，遵守属地政府森林防火管理制度，所有人员进入林区不带火种，不在林区吸烟，不随意丢弃烟头。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（8）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-03-29', '2023-07-12');
INSERT INTO `cmc_safe` VALUES ('1648881416163557378', '1648881416163557378', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、森林防火、消防安全、作业中摔倒、砸伤、边坡落石、防盗、防动物伤害等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于甘孜州九龙县高原高海拔地区，出工前做好参与人员身体健康了解，有高血压III期以上及心、肺、肾等部位器质性病变的不参与本项目测绘作业。\n（2）如果采取无人机飞行作业须先取得相关部门批准，同意后方可作业，无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（3）目前藏区春雪较为严重，到测区路途遥远，提醒项目驾驶员做好出发前车辆维护及安全检查，不病车上路，不疲劳驾驶。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒。\n（5）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（6）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-03-23', '2023-08-11');
INSERT INTO `cmc_safe` VALUES ('1648881416184528898', '1648881416184528898', 138, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：水下地形测绘时溺水、山区边坡落石、交通安全、森林防火、消防安全、高处坠物、物体打击、摔倒、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于云南省盐津县境内，涉及安全风险较高的水下地形等测绘作业，项目人员要随时绷紧安全生产这跟弦，作业前制定好应急预案、应急处置措施和作业计划中安全管理控制措施。\n（2）本项目涉及水下地形测量，测绘人员作业前需到相关部门和单位报备后，方可开展作业，本项目严禁租用机动船或使用皮划艇用于涉水作业，水边点测量尽可能避免人工水边立尺，所有临水边测绘作业人员需穿戴好救生衣。\n（3）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（4）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（5）无人机航测前到相关单位进行报备，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（7）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（8）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（9）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关.\n(10)严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-03-21', '2021-04-15');
INSERT INTO `cmc_safe` VALUES ('1648881416197111809', '1648881416197111809', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（（一）本项目存在的安全隐患：高处坠落、高原病、交通安全、消防安全、摔倒、森林火险、新冠肺炎疫情、动植物伤害等。 \n（二）针对隐患源制定的安全措施：\n（1）本次测绘项目涉及像控点测量、地形图测绘、地物调绘、GNSS测量等内容，测区地处西藏高原高海拔地区，安全风险较高，要求项目所有人员高度重视，提升安全意识，进藏前做好身体健康检查、防高原病药品储备等工作。\n（2）严格遵守西藏林芝地区政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（3）高原作业时不宜剧烈运动，注意避免过度疲劳，多喝水和多食水果、蔬菜。\n（4）住宿地注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（5）外业项目在工作前做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理。\n（6）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（7）无人机航测前到相关单位进行报备，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（8）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（9）进出场路途遥远，提醒驾驶员做好车辆维护保养，加强交通安全管理，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前藏区春雪时期，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶。出差前检查防滑链等应急设备是否齐全。\n（10）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（11）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-03-21', '2021-07-13');
INSERT INTO `cmc_safe` VALUES ('1648881416213889025', '1648881416213889025', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：高处坠落、高原病、交通安全、消防安全、摔倒、森林火险、新冠肺炎疫情、动植物伤害等。 \n（二）针对隐患源制定的安全措施：\n（1）本次测绘项目涉及地形图测绘、地物调绘、GNSS测量、导线测量、公路放线测绘、公路控制测绘等内容，测区地处西藏高原高海拔地区，安全风险较高，要求项目所有人员高度重视，提升安全意识，进藏前做好身体健康检查、防高原病药品储备等工作。\n（2）严格遵守西藏林芝政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（3）高原作业时不宜剧烈运动，注意避免过度疲劳，多喝水和多食水果、蔬菜。\n（4）住宿地注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾事故。\n（5）外业项目在工作前做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理。\n（6）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（7）无人机航测前到相关单位进行报备，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（8）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（9）进出场路途遥远，提醒驾驶员做好车辆维护保养，加强交通安全管理，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前藏区春雪时期，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶。出差前检查防滑链等应急设备是否齐全。\n（10）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（11）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-03-21', '2023-07-25');
INSERT INTO `cmc_safe` VALUES ('1648881416226471938', '1648881416226471938', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边坡落石、森林防火、消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）本次测绘项目大都在康定境内，山区道路多，测区下午风较大，目前处于森林防火期森林火险较高。\n（2）工作中提醒驾驶员山区道路行驶注意边坡落石，谨慎驾驶，不得超速行驶，乡村道路路况不明时，不盲目冒进，项目车辆年限较长，对影响安全的方向、刹车等关键部位，加强维护保养，驾驶员不得带情绪开车，开英雄车，不得酒后驾驶。\n（3）无人机飞行前报备相关单位（部门），选择合适天气，不冒险飞行，作业前保证无人机各部件完好，两人交叉检查，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（5）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾,要求项目部所有人员离开宿舍和办公室关闭电源，特别是大功率烤火设备一定做到人离断电。\n（6）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（7）因工作需要租用车辆时，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全，并提前报备公司综合事务部。\n（8）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-03-10', '2023-03-17');
INSERT INTO `cmc_safe` VALUES ('1648881416243249154', '1648881416243249154', 35, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：高处坠落、森林火险、消防安全、交通安全、新冠肺炎疫情、边坡落石、摔倒等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于石棉县高山峡谷地区，要求项目所有参与人员提高作业中安全意识，项目负责人不违章指挥，工作中不冒险作业。\n（2）外业项目在工作前做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理。\n（3）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（4）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查。\n（5）无人机航测前到相关单位进行报备，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（6）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（7）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-03-10', '2023-07-12');
INSERT INTO `cmc_safe` VALUES ('1648881416260026369', '1648881416260026369', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边坡落石、森林防火、消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）本次测绘项目大都在康定境内，山区道路多，测区下午风较大，目前处于森林防火期森林火险较高。\n（2）工作中提醒驾驶员山区道路行驶注意边坡落石，谨慎驾驶，不得超速行驶，乡村道路路况不明时，不盲目冒进，项目车辆年限较长，对影响安全的方向、刹车等关键部位，加强维护保养，驾驶员不得带情绪开车，开英雄车，不得酒后驾驶。\n（3）无人机飞行前报备相关单位（部门），选择合适天气，不冒险飞行，作业前保证无人机各部件完好，两人交叉检查，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（5）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾,要求项目部所有人员离开宿舍和办公室关闭电源，特别是大功率烤火设备一定做到人离断电。\n（6）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（7）因工作需要租用车辆时，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全，并提前报备公司综合事务部。\n（8）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-03-10', '2024-04-19');
INSERT INTO `cmc_safe` VALUES ('1648881416276803586', '1648881416276803586', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边坡落石、森林防火、消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）本次测绘项目大都在康定境内，山区道路多，测区下午风较大，目前处于森林防火期森林火险较高。\n（2）工作中提醒驾驶员山区道路行驶注意边坡落石，谨慎驾驶，不得超速行驶，乡村道路路况不明时，不盲目冒进，项目车辆年限较长，对影响安全的方向、刹车等关键部位，加强维护保养，驾驶员不得带情绪开车，开英雄车，不得酒后驾驶。\n（3）无人机飞行前报备相关单位（部门），选择合适天气，不冒险飞行，作业前保证无人机各部件完好，两人交叉检查，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（5）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾,要求项目部所有人员离开宿舍和办公室关闭电源，特别是大功率烤火设备一定做到人离断电。\n（6）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（7）因工作需要租用车辆时，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全，并提前报备公司综合事务部。\n（8）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-03-10', '2022-03-08');
INSERT INTO `cmc_safe` VALUES ('1648881416293580802', '1648881416293580802', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边坡落石、森林防火、消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）本次7个测绘项目大都在泸定县境内，山区道路多，测区下午风较大，目前处于森林防火期森林火险较高。\n（2）工作中提醒驾驶员山区道路行驶注意边坡落石，谨慎驾驶，不得超速行驶，乡村道路路况不明时，不盲目冒进，项目车辆年限较长，对影响安全的方向、刹车等关键部位，加强维护保养，驾驶员不得带情绪开车，开英雄车，不得酒后驾驶。\n（3）无人机飞行前报备相关单位（部门），选择合适天气，不冒险飞行，作业前保证无人机各部件完好，两人交叉检查，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（5）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾。\n（6）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（7）因工作需要租用车辆时，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全，并提前报备公司综合事务部。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-03-09', '2022-11-25');
INSERT INTO `cmc_safe` VALUES ('1648881416310358017', '1648881416310358017', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边坡落石、森林防火、消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）本次测绘项目大都在康定境内，山区道路多，测区下午风较大，目前处于森林防火期森林火险较高。\n（2）工作中提醒驾驶员山区道路行驶注意边坡落石，谨慎驾驶，不得超速行驶，乡村道路路况不明时，不盲目冒进，项目车辆年限较长，对影响安全的方向、刹车等关键部位，加强维护保养，驾驶员不得带情绪开车，开英雄车，不得酒后驾驶。\n（3）无人机飞行前报备相关单位（部门），选择合适天气，不冒险飞行，作业前保证无人机各部件完好，两人交叉检查，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（5）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾,要求项目部所有人员离开宿舍和办公室关闭电源，特别是大功率烤火设备一定做到人离断电。\n（6）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（7）因工作需要租用车辆时，作业前必须签订租车协议，协议中必须明确相关方安全职责，租用车辆证件必须齐全，并提前报备公司综合事务部。\n（8）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-03-09', '2022-05-18');
INSERT INTO `cmc_safe` VALUES ('1648881416327135233', '1648881416327135233', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：测区社会治安差、交通安全、森林防火、住宿地消防安全、防盗、临水作业溺水、边坡坠物、动植物伤害、新冠肺炎等。 \n（二）针对隐患源制定的安全措施：\n（1）做好与成都院及相关单位沟通、协调工作，项目参与人员提高安全意识，工作中不麻痹大意，项目负责人做好薄弱时段安全管理。\n（2）测区社会治安较差，须和当地政府、成勘院及其他作业队伍做好协调和配合，注意员工人身安全，尊重当地老百姓生活习惯，避免发生茅盾和冲突。\n（3）测区位于藏区高海拔地区，做好所有人员健康监护，有高血压III期及心、肺、肾等部位器质性病变的不得参与此项目工作，储备必备的防高原病药品,预防高原病发生。\n（4）测区植被茂密，避免动植物伤害，目前还处于森林防火严管期内，所有人员必须遵守属地政府森林防火规定，不得到火种到林区，不得在林区吸烟，生活中不得随意丢弃烟头等。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（7）临水边作业穿戴好救生衣，项目地处高原地区，工作中劳逸结合，合理安排工作。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-03-10', '2023-06-28');
INSERT INTO `cmc_safe` VALUES ('1648881416343912449', '1648881416343912449', 122, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：水边作业溺水、边坡落石、交通安全、森林防火、消防安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）水下地形测绘时目前公司测绘项目安全风险相对较高的测量工作，要求项目参与人员从思想上高度重视，作业前开展班前安全教育，对潜在的安全风险作出预判，积极应对。\n（2）水下地形测绘前须先对测区进行踏勘，特别是对有溢流坝、浅滩、漂浮物等影响无人船作业安全的危险源作出辨识，排除安全隐患。\n（3）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等。\n（4）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n（5）尊重少数民族习惯，搞好团结。\n（6）水上作业和水边作业必须穿载救生衣，进入工区必须佩戴安全帽。\n（7）岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳。水上作业应穿救生衣，及时观察水域附近情况.\n（8）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外.\n（9）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品.\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-03-09', '2023-06-30');
INSERT INTO `cmc_safe` VALUES ('1648881416360689665', '1648881416360689665', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：高处坠落、交通安全、物体打击、森林火险、消防安全等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于瀑布沟水电站大坝附近区域，无人机飞行前须报备业主或者成都院工作联系人，得到飞行许可，严格遵守瀑布沟水电站相关的安全管理规定。\n（2）项目负责人做好出工前各项准备，了解本人作业场所和工作岗位存在的危险因素、防范措施及事故应急措施和相关自救互救知识。\n（3）进入工地，不得携带火种，严禁在工地现场吸烟。作业中佩戴好安全防护用具，与施工机械保持安全距离。进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。\n（5）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（6）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-02-26', '2023-08-09');
INSERT INTO `cmc_safe` VALUES ('1648881416377466882', '1648881416377466882', 138, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：测区社会治安差、交通安全、森林防火、住宿地消防安全、防盗、临水作业溺水、边坡坠物、动植物伤害、新冠肺炎等。 \n（二）针对隐患源制定的安全措施：\n（1）测区社会治安较差，须和当地政府、成勘院及其他作业队伍做好协调和配合，注意员工人身安全，尊重当地老百姓生活习惯，避免发生茅盾和冲突。\n（2）测区位于藏区高海拔地区，做好所有人员健康监护，有高血压III期及心、肺、肾等部位器质性病变的不得参与此项目工作，储备必备的防高原病药品,预防高原病发生。\n（3）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（4）测区植被茂密，避免动植物伤害，目前还处于森林防火严管期内，所有人员必须遵守属地政府森林防火规定，不得到火种到林区，不得在林区吸烟，生活中不得随意丢弃烟头等。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（6）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（7）临水边作业穿戴好救生衣，项目地处高原地区，工作中劳逸结合，合理安排工作。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-02-27', '2023-08-25');
INSERT INTO `cmc_safe` VALUES ('1648881416394244098', '1648881416394244098', 121, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：森林火险、消防安全、交通安全、边坡落石、施工区机械伤害、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于四川阿坝州境内，目前正值森林防火严管期，参与测量人员进入林区不得携带火种，不得在林区吸烟，更不得野外用火。\n（2）测区气温降低，暗冰路段较多，作业中防摔倒，工作中提醒驾驶员注意交通安全，特别是暗冰路段谨慎通行，住宿地严格管理电气设备规范使用，特别是用于取暖的大功率的设备，一定做到人离电断。\n（3）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（5）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（6）时下正值寒冬季节，雾多、霜多、冰雪多、气温低，环境复杂，测绘工作中严防森林（草原）火险，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-02-08', '2023-03-17');
INSERT INTO `cmc_safe` VALUES ('1648881416411021314', '1648881416411021314', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边境地区治安安全、森林防火及消防安全、交通安全、边坡落石、临水边作业溺水、高原病、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于西藏墨脱县中印边境区域，项目参与人员严格遵守边防（边境）管理制度和当地政府相关规定，工作前做好物资准备、身体健康检查、必备药物储备、新冠核酸检测等。\n（2）出差途中经过多个高海拔地区，合理安排行程，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（3）出差（出工）中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（4）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（5）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（6）加强交通安全管理，长途行车不得疲劳驾驶，提醒驾驶员注意休息，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶，等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出差前检查防滑链等应急设备是否齐全。\n（7）对水下地形测量，全部采用无人船测量，无人船的收放区域必须选在水流平缓部位，且不得单人作业，作业人员穿戴救生衣，在水边线以上安全部位进行遥控操作，不得涉水，严防摔倒。\n（8）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-02-02', '2023-08-24');
INSERT INTO `cmc_safe` VALUES ('1648881416427798530', '1648881416427798530', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边境地区治安安全、森林防火及消防安全、交通安全、边坡落石、临水边作业溺水、高原病、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于西藏墨脱县中印边境区域，项目参与人员严格遵守边防（边境）管理制度和当地政府相关规定，工作前做好物资准备、身体健康检查、必备药物储备、新冠核酸检测等。\n（2）出差途中经过多个高海拔地区，合理安排行程，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（3）出差（出工）中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（4）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（5）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（6）加强交通安全管理，长途行车不得疲劳驾驶，提醒驾驶员注意休息，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶，等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出差前检查防滑链等应急设备是否齐全。\n（7）对水下地形测量，全部采用无人船测量，无人船的收放区域必须选在水流平缓部位，且不得单人作业，作业人员穿戴救生衣，在水边线以上安全部位进行遥控操作，不得涉水，严防摔倒。\n（8）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-02-02', '2023-09-07');
INSERT INTO `cmc_safe` VALUES ('1648881416444575746', '1648881416444575746', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边境地区治安安全、森林防火及消防安全、交通安全、边坡落石、临水边作业溺水、高原病、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于西藏墨脱县中印边境区域，项目参与人员严格遵守边防（边境）管理制度和当地政府相关规定，工作前做好物资准备、身体健康检查、必备药物储备、新冠核酸检测等。\n（2）出差途中经过多个高海拔地区，合理安排行程，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（3）出差（出工）中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（4）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（5）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（6）加强交通安全管理，长途行车不得疲劳驾驶，提醒驾驶员注意休息，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶，等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出差前检查防滑链等应急设备是否齐全。\n（7）对水下地形测量，全部采用无人船测量，无人船的收放区域必须选在水流平缓部位，且不得单人作业，作业人员穿戴救生衣，在水边线以上安全部位进行遥控操作，不得涉水，严防摔倒。\n（8）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-02-02', '2023-08-24');
INSERT INTO `cmc_safe` VALUES ('1648881416465547266', '1648881416465547266', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边境地区治安安全、森林防火及消防安全、交通安全、边坡落石、临水边作业溺水、高原病、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于西藏墨脱县中印边境区域，项目参与人员严格遵守边防（边境）管理制度和当地政府相关规定，工作前做好物资准备、身体健康检查、必备药物储备、新冠核酸检测等。\n（2）出差途中经过多个高海拔地区，合理安排行程，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（3）出差（出工）中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（4）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（5）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（6）加强交通安全管理，长途行车不得疲劳驾驶，提醒驾驶员注意休息，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶，等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出差前检查防滑链等应急设备是否齐全。\n（7）对水下地形测量，全部采用无人船测量，无人船的收放区域必须选在水流平缓部位，且不得单人作业，作业人员穿戴救生衣，在水边线以上安全部位进行遥控操作，不得涉水，严防摔倒。\n（8）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（9）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-02-02', '2023-08-09');
INSERT INTO `cmc_safe` VALUES ('1648881416482324482', '1648881416482324482', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：消防安全、交通安全、跨国新冠肺炎疫情防控、无人机测绘中安全风险、作业中摔伤、砸伤、盗抢等。 \n（二）针对隐患源制定的安全措施：\n（1）本项目属于跨国测绘项目，出发前做好各项准备工作，包括必须的药品，必备的新冠肺炎防控物资、个人证件等。\n（2）作业人员严格遵守老挝当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（3）航飞作业前须按相关规定办理飞行许可，飞行中环境不可预测，恶劣天气、山丘或电线等障碍物都会对飞行安全造成威胁。因此在飞行过程中因时刻保持警惕，避免发生安全事故。\n（4）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，火灾风险大，参与项目人员务必引起重视。\n（5）工作中劳逸结合，合理安排工作，预防疾病发生。目前处于新冠肺炎疫情防控期，遵守我国际老挝新冠肺炎疫情防控规定，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发烧、咳嗽等症状规范就医。 \n（6）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度。\n（7）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（8）请严格遵守老挝交通规则，遵纪守法，夜晚避免单独外出，不参加任何形式赌博。\n（9）开展安全生产自查自纠，定期对人员进行安全教育和安全交底，安全教育和安全交底工作的开展须结合作业环境和工作内容。\n（10）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-02-20', '2021-12-31');
INSERT INTO `cmc_safe` VALUES ('1648881416499101698', '1648881416499101698', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：森林火险及消防安全、秋冬季交通安全、新冠肺炎疫情、工作中摔伤、砸伤、滑到、高原病等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于西藏山南地区加查县，属于高原高海拔地区，作业前做好相关准备工作，备齐防高原病药物，新冠肺炎防控物资。\n（2）无人机航测前需要相关部门（单位）做好飞行许可报备，作业前要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（3）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。\n（4）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（5）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（6）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（7）加强交通安全管理，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶。出差前检查防滑链等应急设备是否齐全.\n（8）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-28', '2023-06-30');
INSERT INTO `cmc_safe` VALUES ('1648881416520073217', '1648881416520073217', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、高处坠落、物体打击、临水边作业溺水、森林火险及消防安全及新冠肺炎等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于甘孜州泸定县山区，作业中严防边坡落石，特别是大岗山水电站库区公路边坡落石较为严重。\n（2）工作中劳逸结合，合理安排工作，预防疾病发生。目前处于新冠肺炎疫情防控期，遵守我国际老挝新冠肺炎疫情防控规定，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发烧、咳嗽等症状规范就医。\n（3）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（5）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件。\n（6）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-20', '2023-10-08');
INSERT INTO `cmc_safe` VALUES ('1648881416536850434', '1648881416536850434', 138, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：外委项目安全管理风险、森林防火及消防安全、交通安全、边坡落石、高边坡作业、肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）本项目属于外委项目，施测单位须具备本次测绘作业相关测绘资质，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（2）测区涉及隧道进出口和大桥等区域，作业风险相对较高，高边作业时做好安全防护，提前了解作业区域存在的安全风险，做好隐患排查。\n（3）加强参与作业的车辆的安全检查和保养，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（5）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（6）.严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。\n（7）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准.\n（8）目前处于肺炎疫情防控期，严格遵守属地政府肺炎疫情防控管理规定，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发热、咳嗽等症状规范就医\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-21', '2022-03-21');
INSERT INTO `cmc_safe` VALUES ('1648881416557821953', '1648881416557821953', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：施工区机械伤害、边坡落石坠物、交通安全、森林防火及消防安全、作业中摔伤砸伤、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守二滩电厂的各项安全生产管理制度，严格履行岗位安全生产职责，确保企业全员安全责任制的全面落实。\n（2）在工作中认真贯彻执行最新《安全生产法》、《职业病防治法》等法律及行业安全生产法规、标准、规程、规定，严格执行《电力安全工作规程》和“两票三制”制度，并结合班组工作实际，建立健全安全保证和监督措施，并充分调动、发挥其监督、检查、指导作用，实行全面、全员、全方位、全过程管理。\n（3）对公司、电厂、安全监管部门、部门、班组及上级单位查出的隐患和问题，保证按要求组织整改，并将整改结果及时进行反馈，杜绝不接受或不按要求进行整改的现象。\n（4）督促与本班组有业务工作联系的外来人员进入施工现场戴好安全帽，着装符合要求，并带头严格遵守电厂的各项安全管理规定。\n（5）目前处于肺炎疫情防控期，，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发热、咳嗽等症状规范就医。\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（7）加强交通安全管理，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为。\n（8）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素.\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意.\n（10）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间.\n（11）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩.\n（12）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生.\n（13）项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林防火规定。\n\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-15', '2023-06-26');
INSERT INTO `cmc_safe` VALUES ('1648881416578793474', '1648881416578793474', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：施工区机械伤害、边坡落石坠物、交通安全、森林防火及消防安全、作业中摔伤砸伤、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守二滩电厂的各项安全生产管理制度，严格履行岗位安全生产职责，确保企业全员安全责任制的全面落实。\n（2）在工作中认真贯彻执行最新《安全生产法》、《职业病防治法》等法律及行业安全生产法规、标准、规程、规定，严格执行《电力安全工作规程》和“两票三制”制度，并结合班组工作实际，建立健全安全保证和监督措施，并充分调动、发挥其监督、检查、指导作用，实行全面、全员、全方位、全过程管理。\n（3）对公司、电厂、安全监管部门、部门、班组及上级单位查出的隐患和问题，保证按要求组织整改，并将整改结果及时进行反馈，杜绝不接受或不按要求进行整改的现象。\n（4）督促与本班组有业务工作联系的外来人员进入施工现场戴好安全帽，着装符合要求，并带头严格遵守电厂的各项安全管理规定。\n（5）目前处于肺炎疫情防控期，，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发热、咳嗽等症状规范就医。\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（7）加强交通安全管理，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为。\n（8）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素.\n（9）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意.\n（10）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间.\n（11）野外工作中预防中暑，各项目配备防暑降温药品。禁止在江河、池塘、水库等水域游泳及嬉戏游玩.\n（12）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生.\n（13）项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林防火规定。\n\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-15', '2024-04-10');
INSERT INTO `cmc_safe` VALUES ('1648881416603959298', '1648881416603959298', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：水下地形作业中溺水、水边沟边摔倒、高原病、新冠肺炎、冬季防冻、边坡落石、森林防火及消防安全、交通安全等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于拉萨市拉萨河达孜区河段，地形复杂，河道分布杂乱，作业前做好准备工作，特别是防高原药物、防新冠肺炎物资等。\n（2）高原作业时不宜剧烈运动，注意避免过度疲劳，多喝水和多食水果、蔬菜。\n（3）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。\n（4）驾乘人员遵章守纪。驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查。\n（5）出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（6）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n(7)城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒.\n(8)本项目涉及水下地形测量，本项目严禁租用机动船或使用皮划艇用于涉水作业，水边点测量尽可能避免人工水边立尺，所有临水边测绘作业人员需穿戴好救生衣.\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-18', '2023-06-28');
INSERT INTO `cmc_safe` VALUES ('1648881416620736513', '1648881416620736513', 21, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：临水边作业溺水、城区及乡镇交通安全、森林防火及消防安全、新冠肺炎等。 \n（二）针对隐患源制定的安全措施：\n（1）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（2）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（3）本项目涉及水下地形测量，本项目严禁租用机动船或使用皮划艇用于涉水作业，水边点测量尽可能避免人工水边立尺，所有临水边测绘作业人员需穿戴好救生衣。\n（4）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（5）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（6）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-25', '2022-01-04');
INSERT INTO `cmc_safe` VALUES ('1648881416641708034', '1648881416641708034', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：施工区域机械伤害、边坡落石坠物、森林防火及消防安全、交通安全、新冠肺炎疫情、工作中摔倒、砸伤、摔伤等。 \n（二）针对隐患源制定的安全措施：\n（1）本监测项目地处甘孜地区，高山峡谷地带，工作中严防边坡落石，特别是雨季中，库区新修公路边坡，汛期遇到极端天气暂停作业。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（3）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（4）路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（5）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出差前检查防滑链等应急设备是否齐全。\n（6）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（7）开展安全生产自查自纠，定期对人员进行安全教育和安全交底，安全教育和安全交底工作的开展须结合作业环境和工作内容.\n（8）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外.\n（9）目前处于肺炎疫情防控期，，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发热、咳嗽等症状规范就医,。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-15', '2022-06-27');
INSERT INTO `cmc_safe` VALUES ('1648881416658485250', '1648881416658485250', 47, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：消防安全、交通安全、办公室安全及新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关点子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人，（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-14', '2021-03-04');
INSERT INTO `cmc_safe` VALUES ('1648881416679456770', '1648881416679456770', 120, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边坡落石、施工区机械伤害、起重伤害、交通安全、森林防火及消防安全、新冠肺炎疫情、高原病、防盗等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。严格遵守两河口管理局及雅江县安全管理相关规定。\n（2）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（3）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（4）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（5）在工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底。\n（6）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件。\n（7）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避.\n（8）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生.\n（9）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（10）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准.\n（11）目前处于肺炎疫情防控期，严格遵守业主单位肺炎疫情防控方案规定，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发烧、咳嗽等症状规范就医。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-14', '2022-03-15');
INSERT INTO `cmc_safe` VALUES ('1648881416700428290', '1648881416700428290', 47, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：消防安全、交通安全、办公室安全及新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关点子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人，（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-14', '2021-03-04');
INSERT INTO `cmc_safe` VALUES ('1648881416721399809', '1648881416721399809', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：城区及乡村道路等交通安全、森林防火及消防安全、新冠肺炎疫情、无人机飞行作业风险等。 \n（二）针对隐患源制定的安全措施：\n（1）本项目涉及较多的城区地形测绘项目，安全风险较高，城区道路测量机公路边测绘作业时一定穿戴好反光背心、做好过往车辆行人安全提醒，安全防护措施。\n（2）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养。\n（3）时下正值寒冬季节，雾多、霜多、冰雪多、气温低，环境复杂，测绘工作中严防森林（草原）火险，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（4）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素。\n（5）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（6）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（7）目前处于肺炎疫情防控期，，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发热、咳嗽等症状规范就医.\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-14', '2023-06-30');
INSERT INTO `cmc_safe` VALUES ('1648881416742371330', '1648881416742371330', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：森林防火及消防安全、高原病、交通安全、边坡落石坠物、作业中摔伤砸伤、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）本项目作业区域涉及高原高海拔地区和高山峡谷地带，目前处于森林防火严管期，所有作业人员严格遵守森林（草原）防火规定，不得带火种进入林区，不得流动吸烟，禁止野外用火。\n（2）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（3）项目涉及分包，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（4）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出差前检查防滑链等应急设备是否齐全。\n（5）机载激光和无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-14', '2023-06-25');
INSERT INTO `cmc_safe` VALUES ('1648881416759148545', '1648881416759148545', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：水下地形测量中溺水、森林防火及消防安全、交通安全、边坡落石、施工区机械伤害、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1） 本项目涉及水下地形测量，测绘人员作业前需到相关部门报备，方可开展作业，本项目严禁租用机动船或使用皮划艇用于涉水作业，水边点测量尽可能避免人工水边立尺，所有临水边测绘作业人员需穿戴好救生衣。\n（2）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出差前检查防滑链等应急设备是否齐全。\n（3）因工作需要租用车辆（船只），作业前必须签订租车（租船）协议，协议中必须明确相关方安全职责，租用车辆（船只）证件必须齐全，租用船只必须有海事部门颁发的船舶检验证、营运证、船员操作证，方能租用。\n（4）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（5）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（6）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（7）目前处于肺炎疫情防控期，，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发烧、咳嗽等症状规范就医\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-13', '2023-08-10');
INSERT INTO `cmc_safe` VALUES ('1648881416792702977', '1648881416792702977', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：森林防火及消防安全、交通安全、边坡落石、临水边作业溺水、高原病、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）2020年12月22日雅江县下发了封山令，严格遵守当地政府森林防火先关规定，进入测区不得带火种，不得吸烟，不得野外用火。\n（2）目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（3）差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（4）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（5）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（6）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（7）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒.\n（8）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出差前检查防滑链等应急设备是否齐全。\n(9)对水下地形测量，全部采用无人船测量，无人船的收放区域必须选在水流平缓部位，且不得单人作业，作业人员穿戴救生衣，在水边线以上安全部位进行遥控操作，不得涉水\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-13', '2023-09-06');
INSERT INTO `cmc_safe` VALUES ('1648881416830451713', '1648881416830451713', 122, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边坡落石、施工区机械伤害、起重伤害、交通安全、森林防火及消防安全、新冠肺炎疫情、高原病、防盗等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。严格遵守两河口管理局及雅江县安全管理相关规定。\n（2）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（3）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（4）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（5）在工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底。\n（6）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件。\n（7）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避.\n（8）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生.\n（9）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（10）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准.\n（11）目前处于肺炎疫情防控期，严格遵守两河口管理局肺炎疫情防控方案第五版，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发烧、咳嗽等症状规范就医。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-08', '2023-05-06');
INSERT INTO `cmc_safe` VALUES ('1648881416864006146', '1648881416864006146', 120, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边坡落石、施工区机械伤害、起重伤害、交通安全、森林防火及消防安全、新冠肺炎疫情、高原病、防盗等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。严格遵守两河口管理局及雅江县安全管理相关规定。\n（2）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（3）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（4）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（5）在工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底。\n（6）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件。\n（7）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避.\n（8）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生.\n（9）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（10）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准.\n（11）目前处于肺炎疫情防控期，严格遵守双江口水电站肺炎疫情防控方案规定，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发烧、咳嗽等症状规范就医。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-08', '2023-06-28');
INSERT INTO `cmc_safe` VALUES ('1648881416901754881', '1648881416901754881', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、防火、防盗、防狗咬等。 \n（二）针对隐患源制定的安全措施：\n（1）加强交通安全管理，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶。出差前检查防滑链等应急设备是否齐全。\n（2）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（3）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（4）机载激光航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（5）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（6）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-14', '2021-03-09');
INSERT INTO `cmc_safe` VALUES ('1648881416935309313', '1648881416935309313', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、森林火险及消防安全、滑倒摔伤、物体打击、船只倾覆、淹溺等。 \n（二）针对隐患源制定的安全措施：\n（1）作业前需履行工作许可手续，编制JSA，进行安全技术交底，办理工作票；涉及二滩水电站区域作业时，单独办理工作票。\n（2）除收放测量船外，其他时间作业人员禁止靠近水边。\n（3）测量期间，如遇坝身泄洪或水位异常变化，人员和设备应立即撤离至安全地带。\n（4）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等。\n（5）各测量小组至少保证两人同行，禁止单独行动，相互保持通讯畅通。\n（6）野外作业要注意毒蛇、毒蜂等危害动物，携带必要的防护用品和药品。\n（7）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全。\n（8）工作现场禁止吸烟，野外作业禁止携带火种。\n（9）大风、雷电、暴雨等恶劣天气时禁止作业。\n（10）工作时禁止触碰与工作无关的电气设备。\n（11）路上临时停车时，作业人员穿放光背心，在车前后设置警示标志。专人疏导交通。\n (12) 岸边、码头、岸坡等临水边作业应穿救生衣、系安全带，系安全绳。水上作业应穿救生衣，及时观察水域附近情况。\n (13) 工作人员严禁在库内游泳、戏水、钓鱼，严禁酒后作业。\n (14) 每天早晚测量体温，工作期间全程佩戴口罩等防护用品。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-05', '2024-04-07');
INSERT INTO `cmc_safe` VALUES ('1648881416973058050', '1648881416973058050', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边坡落石、水边作业溺水、交通安全、森林防火及消防安全、摔伤、砸伤、滑到、新冠肺炎影响等。 \n（二）针对隐患源制定的安全措施：\n（1）测区位于猴子岩水电站区域，作业前和业主单位取得联系，协调作业时间，征得同意后方可开展作业。\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度及严格遵守猴子岩水电站安全管理规定。\n（3）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件。\n（4）野外工作中有沟、槽、孔、洞，通过湿滑路面时，注意脚下，防止滑倒、摔倒等事故发生。\n（5）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（6）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查。\n（7）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-25', '2021-08-27');
INSERT INTO `cmc_safe` VALUES ('1648881417006612482', '1648881417006612482', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：森林防火及消防安全、水电站施工区机械伤害、交通安全、无人机飞行安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）作业中严格遵守二滩电厂和桐子林电厂各项安全管理规定，作业前须按规定办理工作票、开展针对性安全教育培训和安全交底。\n（2）进入工地，不得携带火种，严禁在工地现场吸烟。作业中佩戴好安全防护用具，与施工机械保持安全距离。进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（3）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。\n（4）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾。\n（5）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（6）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（7）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2021-01-04', '2024-05-08');
INSERT INTO `cmc_safe` VALUES ('1648881417044361218', '1648881417044361218', 138, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：高原病、森林防火及消防安全、交通安全、边坡落石坠物、工作中摔伤砸伤等。 \n（二）针对隐患源制定的安全措施：\n1）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（2）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（3）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（4）时下正值寒冬季节，雾多、霜多、冰雪多、气温低，环境复杂，测绘工作中严防森林（草原）火险，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（5）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（6）加强交通安全管理，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶。出差前检查防滑链等应急设备是否齐全。\n（7）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（8）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（9）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-12-26', '2024-04-19');
INSERT INTO `cmc_safe` VALUES ('1648881417077915649', '1648881417077915649', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：水准测量中交通风险、新冠肺炎疫情、道路交通安全、无人机飞行安全风险、消防安全等。 \n（二）针对隐患源制定的安全措施：\n（1）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒，特别是水准测量中一定做好过往行人车辆安全提醒，做好安全防护措施。\n（2）无人机航测前到相关单位进行报备，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（3）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（4）加强交通安全管理，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为。\n（5）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（6）开展安全生产自查自纠，定期对人员进行安全教育和安全交底，安全教育和安全交底工作的开展须结合作业环境和工作内容。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-12-26', '2021-12-14');
INSERT INTO `cmc_safe` VALUES ('1648881417115664385', '1648881417115664385', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：作业中边坡落石、交通安全、森林防火及消防安全、作业中摔伤、砸伤、等。 \n（二）针对隐患源制定的安全措施：\n（1）测区地处高山峡谷秋冬季节风较大，工作中严防边坡落石、坠物伤害。\n（2）外业项目在工作前做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理。\n（3）野外工作中有沟、槽、孔、洞，通过湿滑路面时，注意脚下，防止滑倒、摔倒等事故发生。\n（4）项目部按“安全第一、预防为主、综合治理”的安全管理方针，落实安全生产责任制，开展员工安全生产知识、技能培训，结合本部门、项目实际情况开展危险源辨识及评价，制定防控措施，切实做好安全生产工作。\n（5）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（6）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-12-26', '2021-08-26');
INSERT INTO `cmc_safe` VALUES ('1648881417149218818', '1648881417149218818', 138, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、交通安全、森林防火及消防安全、作业中砸伤、无人机飞行中安全风险等。 \n（二）针对隐患源制定的安全措施：\n（1）时下正值寒冬季节，雾多、霜多、冰雪多、气温低，环境复杂，测绘工作中严防森林（草原）火险，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（2）无人机作业前到相关单位进行飞行报备，航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好。\n（3）相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（4）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n（5）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（6）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-12-26', '2023-03-17');
INSERT INTO `cmc_safe` VALUES ('1648881417186967554', '1648881417186967554', 47, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）废旧墨盒、电池、硒鼓等其他相关点子产品处置，须执行安全标准程序文件及保密制度规定。\n（5）请勿在办公室内吸烟，在允许区域吸烟时，切勿乱扔烟头，以免发生火灾意外。\n（6）妥当使用并适时检查饮水机、电源插座等，冲泡茶等热饮时使用合适杯具，不要过量接开水，防止烫伤和漏电伤人，\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-12-29', '2021-03-04');
INSERT INTO `cmc_safe` VALUES ('1648881417224716290', '1648881417224716290', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：消防安全、交通安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前还处于新冠肺炎疫情防控期，做好疫情常态化防控，合理佩戴口罩，外出时随身携带口罩，在人员密集、公共场所规范佩戴口罩。随时保持手部卫生，不用脏手触摸眼鼻口等部位。注意社交礼仪，咳嗽、打喷嚏时尽量用纸巾掩住口鼻，公共场所尽可能保持社交距离。\n（2注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（3）资料应做好备份，以防丢失；保管好设备防止丢失。\n（4）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-12-24', '2021-12-15');
INSERT INTO `cmc_safe` VALUES ('1648881417262465026', '1648881417262465026', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：水下地形测量中落水、交通安全、森林防火及消防安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）此项目涉及水下地形测量，测区有泄水建筑物、溢洪坝、浅滩、跌水、漂浮物、电站进水口、航道船闸等，根据现场实际情况做好安全隐患排查，工作中保持足够的安全距离，不得盲目冒进。\n（2）作业前开展安全交底和班前安全活动，并将开展情况的视频、照片发送至公司专职安全员。\n（3）马边县属于彝族自治县，尊重当地民族风俗习惯，避免产生民族矛盾。\n（4）目前还处于新冠肺炎疫情防控期，遵守当地政府管理规定，生活中勤洗手，保持手部卫生，有发烧、咳嗽规范就医。\n（5）测区乡村道路、危险路段较多，工作中加强交通安全管理，提醒驾驶员不带情绪开车，酒后驾驶，遵章守纪。\n（6）当下正值森林防火严管期，遵守属地政府森林防火管理规定，不在林区吸烟，不带火种到林区，不流动吸烟。住宿地注意消防安全，遵守相关规定。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-12-24', '2021-11-26');
INSERT INTO `cmc_safe` VALUES ('1648881417296019457', '1648881417296019457', 33, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、消防安全、交通安全等。 \n（二）针对隐患源制定的安全措施：\n（1）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视。\n（2）目前处于肺炎疫情防控期，，请随时保持手卫生，经常开窗通风，合理佩戴口罩，注意咳嗽礼仪，减少聚集活动，养成健康生活方式，注意饮食安全，配合疫情防控，有发烧、咳嗽等症状规范就医。\n（3）按“安全第一、预防为主、综合治理”的安全管理方针，落实安全生产责任制，开展员工安全生产知识、技能培训，结合本部门、项目实际情况开展危险源辨识及评价，制定防控措施，切实做好安全生产工作。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-12-08', '2021-04-14');
INSERT INTO `cmc_safe` VALUES ('1648881417333768193', '1648881417333768193', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、交通安全、森林防火及消防安全等。 \n（二）针对隐患源制定的安全措施：\n（1）.进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。\n（3）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（5）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查。\n\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-12-08', '2021-08-27');
INSERT INTO `cmc_safe` VALUES ('1648881417367322626', '1648881417367322626', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：临水边作业溺水、交通安全、消防安全等。 \n（二）针对隐患源制定的安全措施：\n（1）本次水下地形测绘全部采用无人船作业，作业前检查好测绘设备，临水边作业人员穿戴好救生衣。\n（2）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为。\n（3）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（5）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-12-01', '2023-02-19');
INSERT INTO `cmc_safe` VALUES ('1648881417400877057', '1648881417400877057', 39, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、防火、防盗、防狗咬等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（2）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。\n（3）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火增多，火灾风险大，大家务必引起重视。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（5）外业测量开始前需结合项目实际情况进行班前安全教育活动，对潜在的危险源、安全隐患做好辨识和排查工作，积极应对，针对作业中不安全行为现场负责人要及时制止并批评教育。\n\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-12-02', '2022-04-03');
INSERT INTO `cmc_safe` VALUES ('1648881417438625793', '1648881417438625793', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：消防安全、交通安全、森林火灾、边坡落石、搬运物品砸伤、工作中滑到摔伤等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（2）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒。\n（3）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（4）时下正值秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣。。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-11-20', '2023-03-17');
INSERT INTO `cmc_safe` VALUES ('1648881417472180225', '1648881417472180225', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：藏区秋冬季森林（草原）火险和消防安全、交通安全、高原病、边坡落石、作业防摔倒、目前藏区大风较多，作业中预防伤害，新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（2）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（3）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（4）时下正值秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣。目前也属于藏区大风天气较多，工作中要预防大风对人员、设备伤害。\n（5）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（6）加强交通安全管理，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶。出差前检查防滑链等应急设备是否齐全。\n（7）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（8）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（9）严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度、测绘作业安全操作规程及当地政府新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（10）本项目涉及临水边测量，所有临水边测绘作业人员需穿戴好救生衣，河滩行走时避免滑倒。\n（11）工作人员必须时刻保持专注，随时注意现场情况，严禁做与工作无关的事情。\n（12）作业中严禁违章作业、违章指挥、违反劳动纪律。\n（13）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-12-01', '2022-05-13');
INSERT INTO `cmc_safe` VALUES ('1648881417509928962', '1648881417509928962', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：藏区秋冬季森林（草原）火险和消防安全、交通安全、高原病、边坡落石、作业防摔倒、目前藏区大风较多，作业中预防伤害，新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（2）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（3）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（4）时下正值秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣。目前也属于藏区大风天气较多，工作中要预防大风对人员、设备伤害。\n（5）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（6）加强交通安全管理，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶。出差前检查防滑链等应急设备是否齐全。\n（7）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（8）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（9）严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度、测绘作业安全操作规程及当地政府新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（10）本项目涉及临水边测量，所有临水边测绘作业人员需穿戴好救生衣，河滩行走时避免滑倒。\n（11）工作人员必须时刻保持专注，随时注意现场情况，严禁做与工作无关的事情。\n（12）作业中严禁违章作业、违章指挥、违反劳动纪律。\n（13）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-12-01', '2021-11-26');
INSERT INTO `cmc_safe` VALUES ('1648881417539289089', '1648881417539289089', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：藏区秋冬季森林（草原）火险和消防安全、交通安全、高原病、边坡落石、作业防摔倒、目前藏区大风较多，作业中预防伤害，新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（2）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（3）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（4）时下正值秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣。目前也属于藏区大风天气较多，工作中要预防大风对人员、设备伤害。\n（5）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（6）加强交通安全管理，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶。出差前检查防滑链等应急设备是否齐全。\n（7）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（8）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准\n（9）严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度、测绘作业安全操作规程及当地政府新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（10）本项目涉及临水边测量，所有临水边测绘作业人员需穿戴好救生衣，河滩行走时避免滑倒。\n（11）工作人员必须时刻保持专注，随时注意现场情况，严禁做与工作无关的事情。\n（12）作业中严禁违章作业、违章指挥、违反劳动纪律。\n（13）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-12-01', '2021-11-26');
INSERT INTO `cmc_safe` VALUES ('1648881417564454914', '1648881417564454914', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、交通安全、消防安全、森林火险、作业中摔倒、搬运设备中砸伤咬等。 \n（二）针对隐患源制定的安全措施：\n1.严格遵守业主及相关单位安全管理规定，测绘作业中请务必注意自身与他人安全，请正确穿戴好反光背心、防滑鞋、安全帽等个体防护用品。\n2.在独立上岗前掌握本职工作所需的安全生产知识和安全操作技能，掌握安全设备、设施、劳动防护用品的使用、维护知识。\n3.进入测绘现场请注意观察和防范各类风险，严禁自行在作业区域以外活动，切勿进入不明区和危险区，避免发生意外。\n4.严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为。\n5.乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品7.严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度。\n6.驾乘人员遵章守纪。驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养。\n7.应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n8、因工作需要租用车辆，须签订租车协议，并报备综合事务部，工作中对租用车辆和驾驶员加强交通安全管理。\n9.进入工地，不得携带火种，严禁在工地现场吸烟。作业中佩戴好安全防护用具，与施工机械保持安全距离。进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-11-16', '2022-09-01');
INSERT INTO `cmc_safe` VALUES ('1648881417644146689', '1648881417644146689', 122, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：高原病、森林防火、消防安全、边坡落石、机械伤害、物体打击、交通安全、新冠肺炎疫情防控、动物伤害、工作中摔伤等。 \n（二）针对隐患源制定的安全措施：\n（1）本次控制网复测项目地处高原地区、工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（2）时下正值秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（3）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（4）前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（5）控制网建网、施测过程需要临时用工时，用工前需每人购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥。\n（6）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出差前检查防滑链等应急设备是否齐全。\n（7）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-11-12', '2020-12-12');
INSERT INTO `cmc_safe` VALUES ('1648881417707061250', '1648881417707061250', 120, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：高原病、森林防火、消防安全、边坡落石、机械伤害、物体打击、交通安全、新冠肺炎疫情防控、动物伤害、工作中摔伤等。 \n（二）针对隐患源制定的安全措施：\n（1）本次控制网复测项目地处高原地区、工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（2）时下正值秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（3）注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（4）前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（5）控制网建网、施测过程需要临时用工时，用工前需每人购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥。\n（6）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出差前检查防滑链等应急设备是否齐全。\n（7）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-11-12', '2022-01-04');
INSERT INTO `cmc_safe` VALUES ('1648881417736421378', '1648881417736421378', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：森林火险  高原病 交通安全、消防安全、摔倒、边坡落石等。 \n（二）针对隐患源制定的安全措施：\n（1）时下正值寒冬季节，雾多、霜多、冰雪多、气温低，环境复杂，测绘工作中严防森林（草原）火险，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（2）作业中佩戴好安全防护用具，与施工机械保持安全距离。进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（3）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（4）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定）。\n（5）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶，出差前检查防滑链等应急设备是否齐全。\n（6）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-11-11', '2021-11-26');
INSERT INTO `cmc_safe` VALUES ('1648881417753198593', '1648881417753198593', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：森林火险、秋冬季交通安全、宿舍办公室消防安全、高原病、边坡坠落等。 \n（二）针对隐患源制定的安全措施：\n（1）目前进入秋冬季节，进入森林防火严管期，不得带火种进入测区，不得在测区抽烟，不得在车上抽烟，不得流动吸烟。\n（2）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（3）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火用油增多，火灾风险大。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）尊重少数民族习惯，搞好团结。\n（6）在工作前做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-11-09', '2021-11-26');
INSERT INTO `cmc_safe` VALUES ('1648881417769975809', '1648881417769975809', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：藏区秋冬季森林（草原）火险和消防安全、交通安全、高原病、边坡落石、作业防摔倒、目前藏区大风较多，作业中预防伤害，新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）目前属于森林防火严管期，项目所有人员（包括临聘人员）进入林区不得携带火种、不得抽烟、违规用火，严格遵守当地政府森林（草原）防火规定。\n（2）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，天气寒冷用电增多，火灾风险大，大家务必引起重视，住宿地取暖要特别注意防火、用电安全。\n（3）本项目地处核心藏区，要求项目员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（4）时下正值秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒，临水边作业穿戴好救生衣。目前也属于藏区大风天气较多，工作中要预防大风对人员、设备伤害。\n（5）项目地处高原地区，工作中劳逸结合，合理安排工作，预防高原病发生，项目须储备必要的防高原病药品。注意饮食卫生，目前处于新冠肺炎疫情防控期，遵守属地政府肺炎疫情防控规定，尽可能避免食用生、冷等食品。\n（6）加强交通安全管理，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶。出差前检查防滑链等应急设备是否齐全。\n（7）项目如需临时用工，须先购买临时用工人员人身意外伤害保险，根据作业内容进行针对性安全交底，工作中经常性安全提醒，确保项目所有人员人身安全。\n（8）项目如需租用车辆，须签订租车协议，并报备公司综合事务部，对租用车辆车况、驾驶员驾驶技术进行严格把关。\n（9）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '本次测区范围较大，地域跨度长，安全风险较高，项目负责人到现场后必须结合实际情况对测区进行危险源辨识、隐患排查，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', NULL, '2020-10-31', '2022-11-07');
INSERT INTO `cmc_safe` VALUES ('1648881417782558721', '1648881417782558721', 122, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：森林火险、秋冬季交通安全、宿舍办公室消防安全、高原病、边坡坠落等。 \n（二）针对隐患源制定的安全措施：\n（1）甘孜州目前进入秋冬季节，进入森林防火严管期，不得带火种进入测区，不得在测区抽烟，不得在车上抽烟，不得流动吸烟。\n（2）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（3）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火用油增多，火灾风险大。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）尊重少数民族习惯，搞好团结。\n（6）在工作前做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-10-27', '2022-05-18');
INSERT INTO `cmc_safe` VALUES ('1648881417795141633', '1648881417795141633', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、住宿区消防安全、高边坡作业坠落、临水边作业溺水、无人机飞行发生意外事件等。 \n（二）针对隐患源制定的安全措施：\n（1）枢纽闸上下游测绘时涉及高边坡，严防坠落，临水边作业穿戴好救生衣。\n（2）无人机飞行时选择好合适天气，起飞前检查好作业设备，避免因机械故障发生意外事件，像控点采集时严防滑到、摔倒。\n（3）工作中注意交通安全，路边作业时做好安全防范工作，做好过往车辆安全提醒。\n（4）驾乘人员遵章守纪。驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查。\n（5）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为。\n（6）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（7）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-10-27', '2022-08-22');
INSERT INTO `cmc_safe` VALUES ('1648881417807724546', '1648881417807724546', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '1)本项目存在的安全隐患：新冠肺炎疫情、水下地形测量溺水、交通风险、食物中毒、消防安全、森林火险等。 \n2) 针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度、测绘作业安全操作规程及当地政府新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）城区及公路边作业穿戴好反光背心等劳动防护用品，项目驾驶员养成出工前后检查车辆的习惯，发现问题及时处理，不得有酒后驾驶、疲劳驾驶、超速行驶等违章行为，确保行车安全。\n  (3) 本项目涉及水下地形测量，测绘人员作业前需到属地政府海事局办理相关的水上作业许可证（资格证），方可开展作业，本项目严禁租用机动船或使用皮划艇用于涉水作业，水边点测量尽可能避免人工水边立尺，所有临水边测绘作业人员需穿戴好救生衣。\n（4）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-10-19', '2022-08-22');
INSERT INTO `cmc_safe` VALUES ('1648881417820307458', '1648881417820307458', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '1)本项目存在的安全隐患：作业中摔伤、物体砸伤、新冠肺炎疫情、临水边测量溺水、交通风险、食物中毒、作业中摔倒、消防安全等。 \n2) 针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度、测绘作业安全操作规程及当地政府新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）城区及公路边作业穿戴好反光背心等劳动防护用品，项目驾驶员养成出工前后检查车辆的习惯，发现问题及时处理，不得有酒后驾驶、疲劳驾驶、超速行驶等违章行为，确保行车安全。\n  (3) 本项目涉及临水边测量，所有临水边测绘作业人员需穿戴好救生衣，河滩行走时避免滑倒。\n（4）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n（5）施工控制网建网、施测过程需要临时用工时，用工前需每人购买人身意外伤害保险，针对性开展安全交底，工作中经常性提醒安全注意事项，不违章指挥。\n（6）测区乡村道路较多，路窄车多，当地老乡安全意识相对较差，交通风险较高，要求项目驾驶员遵章守纪，不超速行驶，注意避让乡村电瓶车、摩托车。\n(7)控制网建网作业中，搬运东西较多，作业中严防摔倒和物体砸伤等事件发生。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-10-20', '2022-08-22');
INSERT INTO `cmc_safe` VALUES ('1648881417837084674', '1648881417837084674', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：砸伤、摔伤、临江落水、交通安全、消防安全、防盗、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）现场负责人工作前进行现场安全技术交底，交代工作中的风险及控制措施。\n（2）在搬运设备、材料过程中，做好防护，防止脱落砸伤。\n（3）临水边作业时穿好救生衣，防止落水、溺水。\n（4）测绘人员作业前需到属地政府海事局办理相关的水上作业许可证（资格证），方可开展作业，本项目严禁租用机动船或使用皮划艇用于涉水作业。\n（5） 参加作业的人员应不饮酒、不吸娴、不赌博，养成良好的作息习惯，合理规范自己的行为，保持良好的精神状。\n（6）工作人员必须时刻保持专注，随时注意现场情况，严禁做与工作无关的事情。\n（7）对临时聘请的工人，应加强班前安全教育和培训，购买相关的人身意外保险。\n（8)作业中严禁违章作业、违章指挥、违反劳动纪律。\n（9）遵守属地政府新冠肺炎疫情管理规定。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-10-14', '2022-09-23');
INSERT INTO `cmc_safe` VALUES ('1648881417849667586', '1648881417849667586', 70, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、消防安全、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）外业项目在工作前做好充分准备，提前关注相关区域气象、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理。\n（2）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（3）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生。\n\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-10-13', '2022-09-20');
INSERT INTO `cmc_safe` VALUES ('1648881417862250498', '1648881417862250498', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、水下地形测量溺水、交通风险、食物中毒、消防安全、森林火险等等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及当地政府新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）城区及公路边作业穿戴好反光背心等劳动防护用品，项目驾驶员养成出工前后检查车辆的习惯，发现问题及时处理，不得有酒后驾驶、疲劳驾驶、超速行驶等违章行为，确保行车安全。\n (3) 无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n (4) 本项目涉及水下地形测量，测绘人员作业前需到属地政府海事局办理相关的水上作业许可证（资格证），方可开展作业，本项目严禁租用机动船或使用皮划艇用于涉水作业，水边点测量尽可能避免人工水边立尺，所有临水边测绘作业人员需穿戴好救生衣。\n（5）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-10-13', '2022-08-22');
INSERT INTO `cmc_safe` VALUES ('1648881417874833410', '1648881417874833410', 138, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、秋冬季森林火险、驻地消防安全、高边坡作业边坡落石、新冠肺炎疫情防控等。 \n（二）针对隐患源制定的安全措施：\n（1）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对委托单位安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（2）目前属于藏区森林火险严管期，严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（3）高原作业时不宜剧烈运动，注意避免过度疲劳，多喝水和多食水果、蔬菜。\n（4）尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（5）时下正值秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，测绘工作中严防森林（草原）火险，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（6）本项目局部涉及水下地形测量、原则上只能用无人船进行水下地形测绘工作，工作中如必须租用船只，租用船只，证件必须齐全，租用船只必须有海事部门颁发的船舶检验证、营运证、船员操作证，方能租用。临水边测绘作业时所有人员必须穿戴好救生衣，方可开展作业。\n（7）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素。\n（8）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全渔区警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（9）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（10）按“安全第一、预防为主、综合治理”的安全管理方针，落实安全生产责任制，开展员工安全生产知识、技能培训，结合本部门、项目实际情况开展危险源辨识及评价，制定防控措施，切实做好安全生产工作。\n（11）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-10-13', '2021-11-29');
INSERT INTO `cmc_safe` VALUES ('1648881417887416322', '1648881417887416322', 11, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、消防安全、无人机作业中突发情况、森林防火、新冠肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）无人机作业前需到相关部门报备，办理相关手续，航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（2）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备人员负责安全观察和警戒。\n（3）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内。\n（4）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾，冬季时电器火灾高发期，天气寒冷用电用火用油增多，火灾风险大，大家务必引起重视。\n（5）遵守属地政府森林防火管理规定，不得将火种带入林区，不得在林区抽烟，乱扔烟头。\n（6）严格遵守当地政府新冠肺炎疫情管理规定，注意饮食卫生，避免食物中毒。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-10-12', '2021-12-15');
INSERT INTO `cmc_safe` VALUES ('1648881417904193537', '1648881417904193537', 122, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：秋冬季交通安全、森林防火、消防安全、边坡落石、新冠肺炎疫情、高边坡作业等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（2）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（3）严格遵守属地政府森林（草原）防火规定，严格遵守两河口管理局森林、消防管理规定，严禁带火种进入测区、禁止在测区吸烟，禁止在车上吸烟、禁止向车外扔烟头。\n（4）项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（5）天气寒冷，风干物燥，易发生火灾。要结合部门、项目实际，组织火灾隐患排查治理，特别是办公室、宿舍取暖要特别注意防火、用电安全。\n（6）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（7）加强交通安全管理，施工区隧道、交叉路口、施工车辆较多，驾驶人员遵章守纪，不得超速行驶、酒后驾驶、疲劳驾驶等违章行为，目前处于秋冬季节，冰雪道路较多，特别是暗冰路段，要求驾驶人谨慎驾驶。\n（8）严格遵守属地政府和两河口管理局新冠肺炎疫情管理规定。\n（9）库区公路修建时间不长，部分边坡地质条件较差，边坡落石风险较高，通过危险路段观察通行，严防边坡落石发生。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', NULL, '2020-10-12', '2021-02-02');
INSERT INTO `cmc_safe` VALUES ('1648881417925165058', '1648881417925165058', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：秋冬季森林火灾消防安全、交通安全、高原病、山区边坡落石、新冠肺炎疫情防控等。 \n（二）针对隐患源制定的安全措施：\n（1）进入测区严禁携带火种、不得流动吸烟、不得野外用火、作业区不得吸烟，严格遵守当地政府森林防火管理规定。\n（2）此项目属于委外项目，项目负责人对委托单位安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工，严禁违章作业、违规指挥、违反劳动纪律。\n（3）目前已经进入藏区秋冬季节，做好交通安全管理，要求项目驾驶员冰雪道路谨慎驾驶，不疲劳驾驶、酒后驾车。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', NULL, '2020-10-28', '2021-11-26');
INSERT INTO `cmc_safe` VALUES ('1648881417954525186', '1648881417954525186', 138, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：高原病、水下地形测绘中溺水、交通安全、秋冬季森林火险、驻地消防安全、高边坡作业边坡落石、新冠肺炎疫情防控等。 \n（二）针对隐患源制定的安全措施：\n（1）本项目属于分包项目，相关分包单位需具备此项目测绘作业资格，作业前需签订分包协议，协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对委托单位安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（2）目前属于藏区森林火险严管期，严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（3）高原作业时不宜剧烈运动，注意避免过度疲劳，多喝水和多食水果、蔬菜。\n（4）尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（5）时下正值秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，测绘工作中严防森林（草原）火险，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n（6）本项目局部涉及水下地形测量、原则上只能用无人船进行水下地形测绘工作，工作中如必须租用船只，租用船只，证件必须齐全，租用船只必须有海事部门颁发的船舶检验证、营运证、船员操作证，方能租用。临水边测绘作业时所有人员必须穿戴好救生衣，方可开展作业。\n（7）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素。\n（8）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全渔区警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（9）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（10）按“安全第一、预防为主、综合治理”的安全管理方针，落实安全生产责任制，开展员工安全生产知识、技能培训，结合本部门、项目实际情况开展危险源辨识及评价，制定防控措施，切实做好安全生产工作。\n（11）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-10-03', '2021-11-29');
INSERT INTO `cmc_safe` VALUES ('1648881417971302402', '1648881417971302402', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：高原病 、交通安全、森林火险、消防安全、高边坡作业时落石、防摔倒等。\n（二）针对隐患源制定的安全措施：\n（1）测区地处阿坝藏族自治州，高山峡谷地带，工作中严防边坡落石，高边坡测绘时做好安全防护，临水边测绘作业时穿戴好救生衣。\n（2）提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定.。\n（3）严格遵守《测绘人员安全规范》（CH及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。。\n（6）测绘作业中请务必注意自身与他人安全，请正确穿戴好反光背心、防滑鞋、安全帽等个体防护用品。\n（7）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。\n（8）驾乘人员遵章守纪。驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '到现场后须结合测区实际情况进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', NULL, '2020-09-26', '2024-01-16');
INSERT INTO `cmc_safe` VALUES ('1648881418034216962', '1648881418034216962', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、防火、防盗、防狗咬等。 \n（二）针对隐患源制定的安全措施：\n1.测绘作业中请务必注意自身与他人安全，请正确穿戴好反光背心、防滑鞋、安全帽等个体防护用品。\n2.服从电站的安全管理守则、服从管理部门的安全生产管理安排。\n3.在独立上岗前掌握本职工作所需的安全生产知识和安全操作技能，掌握安全设备、设施、劳动防护用品的使用、维护知识。\n4.进入测绘现场请注意观察和防范各类风险，严禁自行在作业区域以外活动，切勿进入不明区和危险区，避免发生意外。\n5.严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为。\n6.乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品7.严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n7.做好测绘成果资料保密、保存工作 ，特别是确权登记类的项目，纸质版资料较多，存放时间长，安全风险较大，做好消防安全、防潮防腐措施，确保测绘资料安全。\n8.驾乘人员遵章守纪。驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养。\n9.应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n10.进入工地，不得携带火种，严禁在工地现场吸烟。作业中佩戴好安全防护用具，与施工机械保持安全距离。进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-09-26', '2022-08-29');
INSERT INTO `cmc_safe` VALUES ('1648881418126491649', '1648881418126491649', 143, 58, '（1）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（2）作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、办公区消防安全、办公室电器设备漏电等。 \n（二）针对隐患源制定的安全措施：\n（1）本项目无外业测绘工作，内业作业时资料应做好备份，以防丢失，保管好设备防止丢失。\n（2）办公室严禁违规使用电器设备，离开办公室关闭门窗及电源，做好消防安全。\n（3）目前还处于肺炎疫情防控期，进入公共场所佩戴好口罩，有发烧、咳嗽、乏力等症状及时就医，并报备公司。\n（4）上班下途中注意交通安全，遵守交通规则。\n（5）严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-09-26', '2023-08-24');
INSERT INTO `cmc_safe` VALUES ('1648881418139074562', '1648881418139074562', 71, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：高原病、交通安全、秋冬季森林火险、驻地消防安全、高边坡作业边坡落石、新冠肺炎疫情防控等。 \n（二）针对隐患源制定的安全措施：\n（1）本项目属于分包项目、作业前签订分包协议、协议中明确相关方安全职责和义务，项目管理人员加强对分包单位安全监管和经常性安全检查，对潜在的危险源进行识别，做好作业中隐患排查等工作，公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对委托单位安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（2）目前属于藏区森林火险严管期，严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（3）高原作业时不宜剧烈运动，注意避免过度疲劳，多喝水和多食水果、蔬菜。\n（4）尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（5）时下正值秋冬季节，雾多、霜多、冰雪多、气温低，环境复杂，测绘工作中严防森林（草原）火险，注意保暖防冻，高边坡，临水边、沟边测绘时注意防滑和防摔倒。\n\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-10-01', '2021-11-26');
INSERT INTO `cmc_safe` VALUES ('1648881418155851778', '1648881418155851778', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：  交通安全、消防安全、防盗、机械伤害等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（2）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（3）遇到极端天气暂停外业工作,临水边测绘时需做好安全防护，在确保安全的前提下开展作业。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n  ( 5 )沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-09-14', '2023-08-02');
INSERT INTO `cmc_safe` VALUES ('1648881418172628994', '1648881418172628994', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、地质灾害、消防安全、肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）外业项目在工作前做好充分准备，提前关注相关区域气象、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理。\n（2）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（3）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（4）乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（5）做好测绘成果资料保密、保存工作 ，特别是确权登记类的项目，纸质版资料较多，存放时间长，安全风险较大，做好消防安全、防潮防腐措施，确保测绘资料安全。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-09-10', '2023-08-02');
INSERT INTO `cmc_safe` VALUES ('1648881418185211906', '1648881418185211906', 39, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）车辆排放符合国家标准，不会对周围环境产生污染；\n（3）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（4）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、新冠肺炎疫情、边坡坠物、消防安全、无人机等设备安全。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守属地政府新冠肺炎疫情防控规定，公共场所佩戴口罩，注意个人卫生，注意食品安全。\n（2）出差期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（3）外业项目在工作前做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理。\n（4）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（5）坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（6）尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（7）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', NULL, '2020-09-10', '2021-12-19');
INSERT INTO `cmc_safe` VALUES ('1648881418197794818', '1648881418197794818', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、防火、防盗、防狗咬等。 \n（二）针对隐患源制定的安全措施：\n（1）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（2）城区及路边作业时按要求穿戴反光背心，摆放安全警示标志，做好过往车辆、行人安全提醒，并配备专人负责安全观察和警戒。\n（3）外业项目在工作前做好充分准备，提前关注相关区域气象、汛情、预警及道路交通等情况，结合项目实际情况做好员工安全教育培训和班前安全活动，克服麻痹思想、侥幸心理。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）提升安全意识，预防意外伤害。外业工作要预防中暑和晒伤，配备防暑药品，做好新冠肺炎疫情防控，避免食用生、冷、变质食品。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-09-07', '2023-08-02');
INSERT INTO `cmc_safe` VALUES ('1648881418214572034', '1648881418214572034', 138, 138, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、防火、防盗、防狗咬等。 \n（二）针对隐患源制定的安全措施：\n（1）测站要远离主干道，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n（2）严禁在高压电线附近作业。\n（3）禁止烟头乱扔，注意作业区周围烟火情况。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）尊重少数民族习惯，搞好团结。\n（6）水上作业和水边作业必须穿载救生衣，进入工区必须佩戴安全帽。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '同意', NULL, '2020-08-31', '2023-03-17');
INSERT INTO `cmc_safe` VALUES ('1648881418227154945', '1648881418227154945', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：高原病、交通安全、消防安全、临水边作业溺水、动植物伤害等。 \n（二）针对隐患源制定的安全措施：\n（1）在工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底。\n（2）在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避。\n（3）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（4）本项目地处核心藏区，要求中心员工尊重当地的民族风俗习惯、宗教信仰等。了解所到地区的民族礼仪、习惯及禁忌，避免作出伤害当地民族感情的事情，以免引起民族矛盾、冲突和发生意外。\n（5）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n（6）高原作业注意休息，合理安排作业时间，初到高原避免剧烈运动。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-08-17', '2022-09-20');
INSERT INTO `cmc_safe` VALUES ('1648881418239737858', '1648881418239737858', 59, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：城区及主干道作业时交通安全、办公住宿区消防安全、测绘资料防丢失、防狗咬等。 \n（二）针对隐患源制定的安全措施：\n（1）对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对委托单位安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（2）入汛后天气多变，进入一年中降雨集中期，雷雨、大风等强对流天气频发期，我们要多关注测区的天气预报、预警，特别是预警信息。如果发现测区有灾害性天气预警，做好关注的合理安排，不要掉以轻心。遭遇洪涝、滑坡、泥石流等灾害时，不惊慌，要尽量往高处疏散并避开洪水、滑坡、泥石流的下泄通道；遭遇强对流天气时，要远离折断的树木、广告牌、高压线、围墙和危房等。\n（3）沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件。\n（4）做好测绘成果资料保密、保存工作 ，特别是确权登记类的项目，纸质版资料较多，存放时间长，安全风险较大，做好消防安全、防潮防腐措施，确保测绘资料安全。\n（5）提高安全生产意识，克服麻痹大意的思想，采取各种行之有效的措施，消除各种不利因素。\n（6）无人机航测时作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全渔区警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准。\n ( 7 )乘坐车辆时请服从驾驶员的管理，系好安全带，不得有影响司机安全驾驶的行为发生，禁止携带易燃易爆物品等危险物品上车。驾驶员严禁酒后开车、疲劳驾驶、超速行驶、不开情绪车。加强车辆维护保养、安全检查。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-08-17', '2023-02-21');
INSERT INTO `cmc_safe` VALUES ('1648881418256515073', '1648881418256515073', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：汛期防汛防灾、交通安全、肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。\n（2）在工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底。\n（3）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避。\n（4）提升安全意识，预防意外伤害。外业工作要预防中暑和晒伤，配备防暑药品，做好新冠肺炎疫情防控，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物。外业工作中配备安全设备和药品，预防犬、毒蜂、蛇等动物伤害。\n（5）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾。\n（6）乘坐公共交通全程戴口罩，尊重属地政府疫情防控相关制度。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-07-21', '2022-10-12');
INSERT INTO `cmc_safe` VALUES ('1648881418273292290', '1648881418273292290', 143, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、汛期自然灾害、边坡坠物、肺炎疫情防控等。 \n（二）针对隐患源制定的安全措施：\n（1）各生产项目在工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底。\n（2）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需做好安全防护，在确保安全的前提下开展作业。\n（3）公司对外委托项目应签订安全生产承诺书和测绘资料保密协议，项目负责人对委托单位安全生产状况进行不定期安全检查和监督指导，对存在的安全隐患要求及时整改，切实做好项目实施过程中的安全工作。\n（4）出差出工中注意消防安全、严防电器线路因短路、过负荷、接触不良、爬电等发生电器火灾。\n（5）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（6）驾乘人员遵章守纪。驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生。\n  (7)沿交通干线、城镇区域作业时应按要求穿戴反光背心、摆放安全警示标志等安全防护用品，做好过往车辆、行人安全提醒，并配置专员负责观察和安全警示，防止发生意外事件', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '遵守属地政府肺炎疫情防控相关制度、外业作业前结合实际开展班前安全教育和安全提醒，不违章作业、违章指挥】冒险作业。', NULL, '2020-08-05', '2023-07-23');
INSERT INTO `cmc_safe` VALUES ('1648881418290069506', '1648881418290069506', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：高原病、交通风险、临水边测量溺水、摔倒、汛期边坡落石等地质灾害、防盗、消防安全等。 \n（二）针对隐患源制定的安全措施：\n（1）现场作业时，必须遵守有关安全、技术操作规程，穿戴好相应的劳动安全防护用具，注意人身和仪器的安全，禁止冒险作业。\n（2）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（3）密切关注测区天气预报，遇特殊天气，及时采取应对措施。\n（4）公路边、施工区内测量时，须将车辆停放停靠在安全、妥善的地点，不得随意停放，不得将车辆交给他人驾驶。\n（5）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需做好安全防护，在确保安全的前提下开展作业。\n（6）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（7）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（8）高原作业时不宜剧烈运动，注意避免过度疲劳，多喝水和多食水果、蔬菜。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-07-22', '2022-12-29');
INSERT INTO `cmc_safe` VALUES ('1648881418302652417', '1648881418302652417', 49, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患： 新冠肺炎疫情、 交通安全、消防安全、防盗、防中暑、防地质灾害等。 \n（二）针对隐患源制定的安全措施：\n（1）工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底\n（2）严格遵守《安全生产法》、《测绘作业人员安全规范》、《等国家法律、法规、标准和公司有关安全生产规章制度。\n（3）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（4）遇到极端天气暂停外业工作,临水边测绘时需做好安全防护，在确保安全的前提下开展作业。\n（5）提升安全意识，预防意外伤害。外业工作要预防中暑和晒伤，配备防暑药品，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物。外业工作中配备安全设备和药品，预防犬、毒蜂、蛇等动物伤害。\n（6）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-07-23', '2021-01-16');
INSERT INTO `cmc_safe` VALUES ('1648881418315235330', '1648881418315235330', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、防火、防盗、防狗咬等。 \n（二）针对隐患源制定的安全措施：\n（1）1.严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度。\n（2）在工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底。\n（3）在泄水建筑物出口及下游区域测绘时，作业前应与相关单位、人员取得联系，了解泄洪情况，合理安排作业时间。水边作业、沿交通干线作业、高边坡附近作业，应按要求穿戴救生衣、反光背心、佩戴安全帽等安全防护用品，并配置专员负责观察和安全警示，保持高度警惕，防止发生意外事件。\n（4）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-07-13', '2024-02-23');
INSERT INTO `cmc_safe` VALUES ('1648881418327818241', '1648881418327818241', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（（一）本项目存在的安全隐患：交通安全、汛期地质灾害、防高温中暑、肺炎疫情、高原病等。 \n（二）针对隐患源制定的安全措施：\n（1）高原作业时不宜剧烈运动，注意避免过度疲劳，多喝水和多食水果、蔬菜。请尊重民族风俗与宗教习惯，维护民族团结与地区稳定\n（2）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。\n（3）提升安全意识，预防意外伤害。外业工作要预防中暑和晒伤，配备防暑药品，做好新冠肺炎疫情防控，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物。外业工作中配备安全设备和药品，预防犬、毒蜂、蛇等动物伤害。\n（4）驾乘人员遵章守纪。驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n(5)遵守属地政府对新冠肺炎疫情的管控规定。\n\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-07-07', '2022-06-09');
INSERT INTO `cmc_safe` VALUES ('1648881418340401153', '1648881418340401153', NULL, 58, '    现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。\n', '（一）本项目存在的安全隐患：高原病、交通风险、临水边测量溺水、摔倒、汛期边坡落石等地质灾害等。 \n（二）针对隐患源制定的安全措施：\n（1）现场作业时，必须遵守有关安全、技术操作规程，穿戴好相应的劳动安全防护用具，注意人身和仪器的安全，禁止冒险作业。\n（2）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（3）密切关注测区天气预报，遇特殊天气，及时采取应对措施。\n（4）公路边、施工区内测量时，须将车辆停放停靠在安全、妥善的地点，不得随意停放，不得将车辆交给他人驾驶。\n（5）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需做好安全防护，在确保安全的前提下开展作业。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-06-25', '2023-03-21');
INSERT INTO `cmc_safe` VALUES ('1648881418369761282', '1648881418369761282', 138, 58, '（1）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：城市道路作业交通安全、夏季高温防中暑、防食物中毒等。 \n（二）针对隐患源制定的安全措施：\n（1）本次测绘项目在城区道路，交通安全风险大，测绘区域通行车辆较多，作业前一定穿戴好反光背心，做好安全防护措施，做好过往车辆安全提醒，确保安全作业。\n（2）提升安全意识，预防意外伤害。外业工作中要预防中暑和晒伤，配备防暑药品，做好新冠肺炎疫情防控，避免食用生、冷、变质食品，防止食物中毒。\n（3）严格遵守《安全生产法》、《测绘作业人员安全规范》、等国家法律、法规、标准和公司有关安全生产规章制度。\n（4）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为。\n（5）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-06-23', '2022-08-24');
INSERT INTO `cmc_safe` VALUES ('1648881418386538498', '1648881418386538498', 33, 58, '作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情  交通安全、消防安全、防盗等。 \n（二）针对隐患源制定的安全措施：\n（1）每日办公室测量体温，并做好记录，多人办公时要求大家佩戴口罩，多通风，勤洗手。\n（2）夏季天气炎热，提醒大家做好防范，预防中暑。\n（3）检查办公区消防设施是否齐全，并保证都在有效期内。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）办公室不得使用大功率电器设备、不得违规使用电器设备。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-06-18', '2021-07-08');
INSERT INTO `cmc_safe` VALUES ('1648881418399121410', '1648881418399121410', 61, 58, '现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：  交通安全、消防安全、防盗、防中暑、防地质灾害等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（2）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（3）遇到极端天气暂停外业工作,临水边测绘时需做好安全防护，在确保安全的前提下开展作业。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）提升安全意识，预防意外伤害。外业工作要预防中暑和晒伤，配备防暑药品，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物。外业工作中配备安全设备和药品，预防犬、毒蜂、蛇等动物伤害。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-01-09', '2023-02-19');
INSERT INTO `cmc_safe` VALUES ('1648881418411704322', '1648881418411704322', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、交通风险、食物中毒、消防安全等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案。\n（2）请尊重民族风俗与宗教习惯，维护民族团结与地区稳定。\n（3）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。\n（4）无人机飞行前提前了解测区天气，确保人员设备安全。\n  ( 5 )驾乘人员遵章守纪。驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-06-12', '2023-08-02');
INSERT INTO `cmc_safe` VALUES ('1648881418424287233', '1648881418424287233', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、汛期地质灾害、边坡落石、森林火险、消防安全等。 \n（二）针对隐患源制定的安全措施：\n（1）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。\n（2）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案。\n（3）禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n（4）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为。\n（5）尊重少数民族习惯，搞好团结，避免发生纠纷。\n（6）夏季雷电活动增多，在雷电天气避免在大树下、电杆边、广告牌附近逗留及在室外拨打移动电话、使用对讲机等移动设备。遇到极端的雷电天气，应立即停止野外作业并在安全区域躲避\n（7）驾驶员严禁酒后开车、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车\n（（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-06-11', '2023-03-17');
INSERT INTO `cmc_safe` VALUES ('1648881418441064449', '1648881418441064449', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、汛期地质灾害、防高温中暑、肺炎疫情、高原病等。 \n（二）针对隐患源制定的安全措施：\n（1）高原作业时不宜剧烈运动，注意避免过度疲劳，多喝水和多食水果、蔬菜。请尊重民族风俗与宗教习惯，维护民族团结与地区稳定\n（2）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。\n（3）提升安全意识，预防意外伤害。外业工作要预防中暑和晒伤，配备防暑药品，做好新冠肺炎疫情防控，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物。外业工作中配备安全设备和药品，预防犬、毒蜂、蛇等动物伤害。\n（4）驾乘人员遵章守纪。驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（5）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n(5)遵守属地政府对新冠肺炎疫情的管控规定。\n\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-06-08', '2022-09-26');
INSERT INTO `cmc_safe` VALUES ('1648881418453647362', '1648881418453647362', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、汛期地质灾害、水边作业溺水、防高温中暑、肺炎疫情等。 \n（二）针对隐患源制定的安全措施：\n（1）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需穿戴好救生衣，做好安全防护，在确保安全的前提下开展作业。\n（2）提升安全意识，预防意外伤害。外业工作要预防中暑和晒伤，配备防暑药品，做好新冠肺炎疫情防控，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物。外业工作中配备安全设备和药品，预防犬、毒蜂、蛇等动物伤害。\n（3）驾乘人员遵章守纪。驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生。\n（4）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n(5)遵守属地政府对新冠肺炎疫情的管控规定。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-06-08', '2023-03-17');
INSERT INTO `cmc_safe` VALUES ('1648881418466230273', '1648881418466230273', 39, 58, '（1）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情  交通安全、消防安全、防盗等。 \n（二）针对隐患源制定的安全措施：\n（1）每日办公室测量体温，并做好记录，多人办公时要求大家佩戴口罩，多通风，勤洗手。\n（2）夏季天气炎热，提醒大家做好防范，预防中暑。\n（3）检查办公区消防设施是否齐全，并保证都在有效期内。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）办公室不得使用大功率电器设备、不得违规使用电器设备。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-06-04', '2021-12-08');
INSERT INTO `cmc_safe` VALUES ('1648881418483007490', '1648881418483007490', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：肺炎疫情、地址灾害、防盗、高温中暑、国外项目语言、民族风俗等沟通障碍。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度及老挝当地法律法规，尊重当地民族风俗习惯，避免发生纠纷。\n（2）进入测绘作业时请注意观察和防范各类风险，严禁自行在作业区域以外活动，切勿进入不明区和危险区，避免发生意外。\n（3）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为。\n（4）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意。\n（5）工作前做好充分准备，提前关注、了解目的地（测区）气象、汛情及道路交通等情况，把准备工作做细、做全、做实，结合项目实际情况做好危险源辨识并制定管控措施，做好员工安全培训和安全交底。\n（6）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-06-03', '2023-08-02');
INSERT INTO `cmc_safe` VALUES ('1648881418495590402', '1648881418495590402', 39, 58, '（1）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：肺炎疫情  交通安全、消防安全、防盗、防中暑、防地质灾害等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（2）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（3）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需做好安全防护，在确保安全的前提下开展作业。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）提升安全意识，预防意外伤害。外业工作要预防中暑和晒伤，配备防暑药品，做好新冠肺炎疫情防控，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物。外业工作中配备安全设备和药品，预防犬、毒蜂、蛇等动物伤害。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-05-22', '2021-04-13');
INSERT INTO `cmc_safe` VALUES ('1648881418508173314', '1648881418508173314', 51, 58, '（1）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情  交通安全、消防安全、防盗等。 \n（二）针对隐患源制定的安全措施：\n（1）每日办公室测量体温，并做好记录，多人办公时要求大家佩戴口罩，多通风，勤洗手。\n（2）夏季天气炎热，提醒大家做好防范，预防中暑。\n（3）检查办公区消防设施是否齐全，并保证都在有效期内。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）办公室不得使用大功率电器设备、不得违规使用电器设备。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-05-22', '2023-08-02');
INSERT INTO `cmc_safe` VALUES ('1648881418524950530', '1648881418524950530', 39, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）车辆排放符合国家标准，不会对周围环境产生污染；\n（3）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（4）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：肺炎疫情  交通安全、消防安全、防盗、防中暑、防地质灾害等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《安全生产法》、《测绘作业人员安全规范》、《无人机航摄安全作业基本要求》等国家法律、法规、标准和公司有关安全生产规章制度。\n（2）乘车时请服从安全行车规定，系好安全带，不得违章指挥驾驶员，禁止携带易燃易爆物品、危险化学品等危险物品。乘坐车辆服从驾驶员的安全管理。驾驶员不得酒后驾驶、超速行驶、分心驾驶、疲劳驾驶等行为。\n（3）做好汛期因暴雨引发的山洪、泥石流、山体滑坡、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作。汛期严禁水上作业，临水边测绘时需做好安全防护，在确保安全的前提下开展作业。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）提升安全意识，预防意外伤害。外业工作要预防中暑和晒伤，配备防暑药品，做好新冠肺炎疫情防控，避免食用生、冷、变质食品，防止食物中毒，杜绝采摘、采购、进食种类不明的野生菌和食用野生动物。外业工作中配备安全设备和药品，预防犬、毒蜂、蛇等动物伤害。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '到现场后须结合测区实际情况进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', NULL, '2020-05-19', '2023-05-18');
INSERT INTO `cmc_safe` VALUES ('1648881418541727745', '1648881418541727745', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、森林火险、边坡落石等。 \n（二）针对隐患源制定的安全措施：\n（1测绘作业中请务必注意自身与他人安全，请正确穿戴好反光背心、安全帽等个体防护用品\n（2）严禁酒后开展作业，工作中禁止嬉戏、打闹,禁止各种不文明行为。\n（3）进入测绘现场后要集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故。\n（4）严格遵守属地政府森林（草原）防火规定，严禁带火种进入林区、禁止在林区吸烟，禁止向车外扔烟头。进入林区时，小心动、植物伤害。\n（5）尊重少数民族习惯，搞好团结。\n（6）驾乘人员遵章守纪。驾驶员严禁酒后开车、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生\n（三）。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目负责人到现场后须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保安全的前提下方可开展工作。', NULL, '2020-05-20', '2022-03-08');
INSERT INTO `cmc_safe` VALUES ('1648881418558504961', '1648881418558504961', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：汛期泥石流、边坡落石、雷电等地质灾害 ， 交通安全，森林防火、防蛇等动物伤害等。 \n（二）针对安全隐患源制定的安全措施：\n（1）天气炎热工作中储备防暑降温药品、避免中暑。\n（2）时下正值雨季、汛期，做好外业测量工作中安全管理，特是雨季严防边坡落石等地质灾害，遇极端天气停止外业测量工作。\n（3）林区作业不得流动吸烟，不得带火种进入测区、不得违规用火。\n（4）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业\n（5）严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度、测绘作业安全操作规程，结合测区实际情况开展班前安全活动。\n（6）加强驾驶员安全教育培训，不得有酒后驾驶、疲劳驾驶、分心驾驶等不安全驾驶行为\n（7）测区植被茂密，夏季防蛇、毒蜂伤害。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目负责人到现场后须结合测区情况对进行隐患排查、分析，及时调整应对措施，确保项目人员、设备安全。', NULL, '2020-05-15', '2022-07-19');
INSERT INTO `cmc_safe` VALUES ('1648881418575282177', '1648881418575282177', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、防火、临水边作业溺水、汛期泥石流等地质灾害等。 \n（二）针对隐患源制定的安全措施：\n（1）时下正值雨季、汛期，做好外业测量工作安全管理，特是雨季严防边坡落石。\n（2）临水边作业做好安全防护、公路边水准作业摆放好反光锥等警示标志。\n（3）林区作业不得流动吸烟，不得带火种进入测区。\n（4）进入工区必须佩戴安全帽。提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定。\n（5）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业\n（6）严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', NULL, '2020-05-12', '2022-08-22');
INSERT INTO `cmc_safe` VALUES ('1648881418592059394', '1648881418592059394', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：边坡落石  交通安全、防火、高原病、临水边测量溺水等。 \n（二）针对隐患源制定的安全措施：\n（1）路边作业穿戴好反光背心等劳动防护用品，项目驾驶员养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n（2）搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（3）禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n（4）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n（5）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程，结合测区实际情况开展班前安全活动。\n\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-05-07', '2022-09-26');
INSERT INTO `cmc_safe` VALUES ('1648881418608836610', '1648881418608836610', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：高原病、交通安全等。 \n（二）针对隐患源制定的安全措施：\n（1）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生\n（2）遇雷电、暴雨、等恶劣气候时停止作业。\n（3）禁止烟头乱扔，注意作业区周围烟火情况。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n （5）现场作业时，必须遵守有关安全、技术操作规程，穿戴好相应的劳动安全防护用具，注意人身和仪器的安全，禁止冒险作业', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', NULL, '2020-05-06', '2021-12-29');
INSERT INTO `cmc_safe` VALUES ('1648881418625613825', '1648881418625613825', 33, 58, '现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/1版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情  交通安全、消防安全、防盗等。 \n（二）针对隐患源制定的安全措施：\n（1）每日办公室测量体温，并做好记录，多人办公时要求大家佩戴口罩，多通风，勤洗手。\n（2）夏季天气炎热，提醒大家做好防范，预防中暑。\n（3）检查办公区消防设施是否齐全，并保证都在有效期内。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）办公室不得使用大功率电器设备、不得违规使用电器设备。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-05-22', '2020-12-05');
INSERT INTO `cmc_safe` VALUES ('1648881418642391041', '1648881418642391041', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通风险、边坡坠物、消防安全、森林火险等。 \n（二）针对安全隐患制定的安全措施：\n（1）作业区道路属于乡村道路，通行车辆较多，当地老乡安全意识较差，做好项目人员交通安全教育，占道停车时摆放好反光锥等应急标志。\n（2）禁止流动吸烟、带火种进入林区，严格遵守森林防火与消防安全相关制度。\n（3）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业，确保人员设备安全。\n（4）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目负责人进场后需将本项目存在的安全风险及时告知参与人员，每日工作前对员工开展班前安全活动，做好安全提醒，确保人员、设备安全。', NULL, '2020-04-22', '2023-08-25');
INSERT INTO `cmc_safe` VALUES ('1648881418663362562', '1648881418663362562', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：临水边作业溺水、交通安全、边坡坠物、森林火险等。 \n（二）针对隐患源制定的安全措施：\n（1）临水边作业做好安全防护、公路边水准作业摆放好反光锥等警示标志。\n（2）林区作业不得流动吸烟，不得带火种进入测区。\n（4）进入工区必须佩戴安全帽。提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定。\n（5）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业\n（6）严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '涉及临水边作业时一定做好安全防护，作业前对项目人员做好风险告知和安全提醒。', NULL, '2020-04-22', '2021-11-26');
INSERT INTO `cmc_safe` VALUES ('1648881418680139778', '1648881418680139778', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、森林防火、边坡落石等。 \n（二）针对隐患源制定的安全措施：\n（1）目前在处于森林防火期，要严防森林火险，不得在测区流动吸烟，带火种进入测区\n（2）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（3）进入施工现场作业时，提前向相关施工单位了解现场施工情况，并请施工单位协调安全，所有人员必须佩戴安全帽、反光背心、防护口罩、手套等安全防护用品\n（4）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '  项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n', NULL, '2020-04-16', '2020-04-30');
INSERT INTO `cmc_safe` VALUES ('1648881418696916993', '1648881418696916993', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、溺水、交通风险、边坡坠物、动植物伤害、物体打击、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n（二）针对隐患源制定的安全措施：\n（（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定.\n（7）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', NULL, '2020-03-27', '2022-08-22');
INSERT INTO `cmc_safe` VALUES ('1648881418713694209', '1648881418713694209', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、溺水、交通风险、边坡坠物、动植物伤害、物体打击、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定.\n（7）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-03-17', '2023-03-17');
INSERT INTO `cmc_safe` VALUES ('1648881418730471425', '1648881418730471425', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、溺水、交通风险、边坡坠物、动植物伤害、物体打击、坍塌、食物中毒、消防安全、森林火险、防盗等。（二）针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定.\n（7）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', '项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', NULL, '2020-03-16', '2021-11-26');
INSERT INTO `cmc_safe` VALUES ('1648881418747248642', '1648881418747248642', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：本项目存在的安全隐患：新冠肺炎疫情、交通风险、边坡坠物、食物中毒、消防安全、森林火险、防盗等\n（二）针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n (3) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (4) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定.\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-03-11', '2022-08-22');
INSERT INTO `cmc_safe` VALUES ('1648881418764025857', '1648881418764025857', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、溺水、交通风险、边坡坠物、食物中毒、消防安全、森林火险、防盗等。 \n（二）针对隐患源制定的安全措施：\n严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定.\n\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-03-09', '2023-08-02');
INSERT INTO `cmc_safe` VALUES ('1648881418776608769', '1648881418776608769', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、溺水、交通风险、边坡坠物、动植物伤害、物体打击、坍塌、食物中毒、消防安全、森林火险、防盗等\n（二）针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定.\n（7）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-03-09', '2023-08-02');
INSERT INTO `cmc_safe` VALUES ('1648881418793385986', '1648881418793385986', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（3）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、溺水、交通风险、边坡坠物、动植物伤害、物体打击、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定.\n（7）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-03-09', '2023-03-17');
INSERT INTO `cmc_safe` VALUES ('1648881418810163201', '1648881418810163201', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、溺水、交通风险、边坡坠物、动植物伤害、物体打击、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n（二）针对隐患源制定的安全措施：\n1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定.\n（7）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-03-04', '2021-08-26');
INSERT INTO `cmc_safe` VALUES ('1648881418822746114', '1648881418822746114', 35, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、交通风险、边坡坠物、动植物伤害、物体打击、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定.\n（7）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-03-02', '2022-03-21');
INSERT INTO `cmc_safe` VALUES ('1648881418835329026', '1648881418835329026', 35, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、溺水、交通风险、边坡坠物、食物中毒、消防安全、森林火险、等。 \n（二）针对隐患源制定的安全措施：\n严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度和测绘作业安全操作规程，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）外出就餐注意饮食卫生。，尊重当地民族风俗习惯、本次作业属于高海拔地区，做好高原病预防工作。\n（7）提前了解测区环境，穿戴好劳动防护用品、肺炎疫情防控期间严格遵守公司及作业地政府相关管控要求。\n（8）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-03-02', '2023-03-17');
INSERT INTO `cmc_safe` VALUES ('1648881418852106241', '1648881418852106241', 144, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、交通风险、边坡坠物、动植物伤害、物体打击、坍塌、食物中毒、消防安全、森林火险、防盗、高原病等。 \n（二）针对隐患源制定的安全措施：\n严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定.\n（7）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-03-02', '2022-03-21');
INSERT INTO `cmc_safe` VALUES ('1648881418864689154', '1648881418864689154', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、交通风险、边坡坠物、动植物伤害、物体打击、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n（二）针对隐患源制定的安全措施：\n严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定.\n（7）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-03-02', '2021-11-26');
INSERT INTO `cmc_safe` VALUES ('1648881418881466369', '1648881418881466369', 21, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：新冠肺炎疫情、溺水、交通风险、边坡坠物、动植物伤害、物体打击、食物中毒、消防安全、森林火险、防盗等。 \n（二）针对隐患源制定的安全措施：\n（（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）提前了解测区环境，穿戴好劳动防护用品，严格遵守公司及地方政府新冠肺炎疫情管理规定.\n（7）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（8）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-03-04', '2022-01-06');
INSERT INTO `cmc_safe` VALUES ('1648881418894049281', '1648881418894049281', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：溺水、高原病、交通风险、边坡坠物、食物中毒、消防安全、森林火险、防盗等。 \n（二）针对隐患源制定的安全措施：\n（严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度和测绘作业安全操作规程，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n（5）外出就餐注意饮食卫生。，尊重当地民族风俗习惯、本次作业属于高海拔地区，做好高原病预防工作。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-02-25', '2022-12-06');
INSERT INTO `cmc_safe` VALUES ('1648881418910826498', '1648881418910826498', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：溺水、高原病、交通风险、边坡坠物、食物中毒、消防安全、森林火险、防盗等。 \n（二）针对隐患源制定的安全措施：\n（严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度和测绘作业安全操作规程，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n（5）外出就餐注意饮食卫生。，尊重当地民族风俗习惯、本次作业属于高海拔地区，做好高原病预防工作。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-02-25', '2022-08-17');
INSERT INTO `cmc_safe` VALUES ('1648881418923409409', '1648881418923409409', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：溺水、高原病、交通风险、边坡坠物、食物中毒、消防安全、森林火险、防盗等。 \n（二）针对隐患源制定的安全措施：\n（严格遵守《测绘人员安全规范》（CH 1016-2008）、公司安全管理制度和测绘作业安全操作规程，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n（5）外出就餐注意饮食卫生。，尊重当地民族风俗习惯、本次作业属于高海拔地区，做好高原病预防工作。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-02-25', '2022-08-17');
INSERT INTO `cmc_safe` VALUES ('1648881418952769538', '1648881418952769538', 122, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：高原病、交通风险、边坡落石、高处坠落、物体打击、起重伤害、机械伤害、坍塌、触电、动植物伤害、临水边测量溺水、摔倒等安全风险等。 \n（二）针对隐患源制定的安全措施：\n（（1）现场作业时，必须遵守有关安全、技术操作规程，穿戴好相应的劳动安全防护用具，注意人身和仪器的安全，禁止冒险作业。\n（2）作业中佩戴好安全帽、反光背心、手套、安全带、安全绳等安全设备和增加防护措施，注意作业区上部滚石、高空坠物等。\n（3）在泄水建筑物出口及附近区域等高度危险区作业，作业前应与调度部门协调作业时间，作业中应保持高度警惕，防止意外泄洪事件发生。\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与施工人员或管理人员取得联系，进入旧洞前应先进行通风和支护。作业应佩戴必要的安全防护用品和通讯设施，作业时注意洞顶物件坠落、坍塌、渗（漏）水等情况。若发现重金属、有害气体等危险物质，应立即停止作业，撤出洞内，并及时报告。\n（5）野外作业时不得单独行动或夜行，所有作业人员必须在天黑前回到住地。每天收测时对仪器设备和人员进行清点，防止丢失事件发生。\n（6）严禁打猎、捕鱼、下河游泳，严禁食用野菜、野果、蘑菇等。\n（7）遇雷电、暴雨、风暴、大雾等恶劣气候时停止作业。\n（8）严禁在悬崖边、陡坡处以及松动危岩下行走、休息或商量工作。在陡坡（坡度大于30度）上进行测量作业时，避开上下交叉作业，防止滚石打伤作业人员。\n（9）进入施工现场作业时，提前向相关施工单位了解现场施工情况，并请施工单位协调安全，所有人员必须佩戴安全帽、反光背心、防护口罩、手套等安全防护用品。\n（10）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-01-09', '2021-11-28');
INSERT INTO `cmc_safe` VALUES ('1648881418965352449', '1648881418965352449', 120, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通风险、边坡落石、高处坠落、物体打击、起重伤害、机械伤害、坍塌、触电、动植物伤害、临水边测量溺水、高原病、摔倒等安全风险等。 \n（二）针对隐患源制定的安全措施：\n（（1）现场作业时，必须遵守有关安全、技术操作规程，穿戴好相应的劳动安全防护用具，注意人身和仪器的安全，禁止冒险作业。\n（2）作业中佩戴好安全帽、反光背心、手套、安全带、安全绳等安全设备和增加防护措施，注意作业区上部滚石、高空坠物等。\n（3）在泄水建筑物出口及附近区域等高度危险区作业，作业前应与调度部门协调作业时间，作业中应保持高度警惕，防止意外泄洪事件发生。\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与施工人员或管理人员取得联系，进入旧洞前应先进行通风和支护。作业应佩戴必要的安全防护用品和通讯设施，作业时注意洞顶物件坠落、坍塌、渗（漏）水等情况。若发现重金属、有害气体等危险物质，应立即停止作业，撤出洞内，并及时报告。\n（5）野外作业时不得单独行动或夜行，所有作业人员必须在天黑前回到住地。每天收测时对仪器设备和人员进行清点，防止丢失事件发生。\n（6）严禁打猎、捕鱼、下河游泳，严禁食用野菜、野果、蘑菇等。\n（7）遇雷电、暴雨、风暴、大雾等恶劣气候时停止作业。\n（8）严禁在悬崖边、陡坡处以及松动危岩下行走、休息或商量工作。在陡坡（坡度大于30度）上进行测量作业时，避开上下交叉作业，防止滚石打伤作业人员。\n（9）进入原始森林、林区等情况不明地区工作时，应请当地人当向导；进入施工现场作业时，提前向相关施工单位了解现场施工情况，并请施工单位协调安全，所有人员必须佩戴安全帽、反光背心、防护口罩、手套等安全防护用品。\n（10）住宿场所应了解清楚消防通道和注意防火防盗，保管好集体财产和私人钱物，防止被盗事件发生。\n（11）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-01-09', '2021-05-06');
INSERT INTO `cmc_safe` VALUES ('1648881418977935362', '1648881418977935362', 121, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通风险、边坡落石、高处坠落、物体打击、起重伤害、机械伤害、坍塌、触电、动植物伤害、临水边测量溺水、高原病、摔倒等安全风险。 \n（二）针对隐患源制定的安全措施：\n（1）现场作业时，必须遵守有关安全、技术操作规程，穿戴好相应的劳动安全防护用具，注意人身和仪器的安全，禁止冒险作业。\n（2）作业中佩戴好安全帽、反光背心、手套、安全带、安全绳等安全设备和增加防护措施，注意作业区上部滚石、高空坠物等。\n（3）在泄水建筑物出口及附近区域等高度危险区作业，作业前应与调度部门协调作业时间，作业中应保持高度警惕，防止意外泄洪事件发生。\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与施工人员或管理人员取得联系，进入旧洞前应先进行通风和支护。作业应佩戴必要的安全防护用品和通讯设施，作业时注意洞顶物件坠落、坍塌、渗（漏）水等情况。若发现重金属、有害气体等危险物质，应立即停止作业，撤出洞内，并及时报告。\n（5）野外作业时不得单独行动或夜行，所有作业人员必须在天黑前回到住地。每天收测时对仪器设备和人员进行清点，防止丢失事件发生。\n（6）严禁打猎、捕鱼、下河游泳，严禁食用野菜、野果、蘑菇等。\n（7）遇雷电、暴雨、风暴、大雾等恶劣气候时停止作业。\n（8）严禁在悬崖边、陡坡处以及松动危岩下行走、休息或商量工作。在陡坡（坡度大于30度）上进行测量作业时，避开上下交叉作业，防止滚石打伤作业人员。\n（9）进入原始森林、林区等情况不明地区工作时，应请当地人当向导；进入施工现场作业时，提前向相关施工单位了解现场施工情况，并请施工单位协调安全，所有人员必须佩戴安全帽、反光背心、防护口罩、手套等安全防护用品。\n（10）住宿场所应了解清楚消防通道和注意防火防盗，保管好集体财产和私人钱物，防止被盗事件发生。\n（11）在社会治安差，人烟稀少的地区工作，应事先和当地政府和有关部门联系，取得当地政府和公安机关的支持。搞好民族关系，注意民族政策，尊重民族风俗和生活习惯，禁止违反民族风俗、政策的情况发生。（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-01-09', '2021-12-17');
INSERT INTO `cmc_safe` VALUES ('1648881418994712578', '1648881418994712578', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）交通风险、边坡落石、高处坠落、物体打击、坍塌、触电、动植物伤害、临水边测量溺水、摔倒等安全风险。 \n（二）针对隐患源制定的安全措施：\n（1）现场作业时，必须遵守有关安全、技术操作规程，穿戴好相应的劳动安全防护用具，注意人身和仪器的安全，禁止冒险作业。\n（2）作业中佩戴好安全帽、反光背心、手套、安全带、安全绳等安全设备和增加防护措施，注意作业区上部滚石、高空坠物等。\n（3）在泄水建筑物出口及附近区域等高度危险区作业，作业前应与调度部门协调作业时间，作业中应保持高度警惕，防止意外泄洪事件发生。\n（4）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与施工人员或管理人员取得联系，进入旧洞前应先进行通风和支护。作业应佩戴必要的安全防护用品和通讯设施，作业时注意洞顶物件坠落、坍塌、渗（漏）水等情况。若发现重金属、有害气体等危险物质，应立即停止作业，撤出洞内，并及时报告。\n（5）野外作业时不得单独行动或夜行，所有作业人员必须在天黑前回到住地。每天收测时对仪器设备和人员进行清点，防止丢失事件发生。\n（6）严禁打猎、捕鱼、下河游泳，严禁食用野菜、野果、蘑菇等。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-01-09', '2021-08-26');
INSERT INTO `cmc_safe` VALUES ('1648881419011489794', '1648881419011489794', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通风险、边坡落石、高处坠落、物体打击、机械伤害、坍塌、触电、动植物伤害、临水边测量溺水、摔倒等安全风险。 \n（二）针对隐患源制定的安全措施：\n（1）驾驶员必须严格遵守《中华人民共和国道路交通法》及成勘院测绘公司交通安全管理规章制度；应积极参加安全培训，并不断的提高自己的业务水平。\n（2）公路边、施工区内测量时，须将车辆停放停靠在安全、妥善的地点，不得随意停放，不得将车辆交给他人驾驶。\n（3）车辆应按规定接受年度检验，不得逾期检审，逾期未办理，未按规定检验或检验不合格的，不得上路行驶，应对所驾车辆的制动、转向、灯光等随时进行检查，定期进行车辆的维护及保养。发现车辆有故障时要立即检修，避免造成车辆机械损坏和在运行途中发生交通事故隐患。\n（4）乘坐车辆时应系好安全带，严禁将头、手、身露出车厢外，不乘坐私揽客员的非法车辆，不乘坐超员、超载车辆，文明乘车，遵守乘车规定。（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。\n（5）现场作业时，必须遵守有关安全、技术操作规程，穿戴好相应的劳动安全防护用具，注意人身和仪器的安全，禁止冒险作业。\n（6）作业中佩戴好安全帽、反光背心、手套、安全带、安全绳等安全设备和增加防护措施，注意作业区上部滚石、高空坠物等。\n（7）在泄水建筑物出口及附近区域等高度危险区作业，作业前应与调度部门协调作业时间，作业中应保持高度警惕，防止意外泄洪事件发生。\n（8）进入平硐、溶洞、隧洞、廊道（尤其是正在施工中的各类洞室）等地下洞室测量应事先与施工人员或管理人员取得联系，进入旧洞前应先进行通风和支护。作业应佩戴必要的安全防护用品和通讯设施，作业时注意洞顶物件坠落、坍塌、渗（漏）水等情况。若发现重金属、有害气体等危险物质，应立即停止作业，撤出洞内，并及时报告。\n（9）野外作业时不得单独行动或夜行，所有作业人员必须在天黑前回到住地。每天收测时对仪器设备和人员进行清点，防止丢失事件发生。\n（10）严禁打猎、捕鱼、下河游泳，严禁食用野菜、野果、蘑菇等。\n（11）遇雷电、暴雨、风暴、大雾等恶劣气候时停止作业。\n（12）严禁在悬崖边、陡坡处以及松动危岩下行走、休息或商量工作。在陡坡（坡度大于30度）上进行测量作业时，避开上下交叉作业，防止滚石打伤作业人员。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-01-09', '2021-08-26');
INSERT INTO `cmc_safe` VALUES ('1648881419028267010', '1648881419028267010', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '1)本项目存在的安全隐患：高原病、交通风险、边坡坠物、动植物伤害、物体打击、机械伤害、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n2) 针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度和测绘作业安全操作规程，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）外出就餐注意饮食卫生。，尊重当地民族风俗习惯、本次作业属于高海拔地区，做好高原病预防工作。\n（7）提前了解测区环境，穿戴好劳动防护用品\n（8）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-01-02', '2020-08-20');
INSERT INTO `cmc_safe` VALUES ('1648881419045044225', '1648881419045044225', 59, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（1)本项目存在的安全隐患：交通风险、边坡坠物、动植物伤害、物体打击、机械伤害、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n2) 针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度和测绘作业安全操作规程，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）外出就餐注意饮食卫生。，尊重当地民族风俗习惯、本次作业属于高海拔地区，做好高原病预防工作。\n（7）提前了解测区环境，穿戴好劳动防护用品\n（8）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-01-02', '2021-12-19');
INSERT INTO `cmc_safe` VALUES ('1648881419057627138', '1648881419057627138', 46, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：本项目存在的安全隐患：溺水、高原病、交通风险、边坡坠物等。 \n（二）针对隐患源制定的安全措施：\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n（5）水上作业和水边作业必须穿载救生衣，进入工区必须佩戴安全帽。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-01-09', '2020-09-07');
INSERT INTO `cmc_safe` VALUES ('1648881419070210050', '1648881419070210050', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：溺水、交通风险、边坡坠物、动植物伤害、物体打击、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）提前了解测区环境，穿戴好劳动防护用品（7）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2019-12-22', '2022-12-29');
INSERT INTO `cmc_safe` VALUES ('1648881419086987266', '1648881419086987266', 83, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：溺水、交通风险、边坡坠物、动植物伤害、物体打击、坍塌、食物中毒、消防安全、森林火险、防盗等\n（二）针对隐患源制定的安全措施：\n1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）提前了解测区环境，穿戴好劳动防护用品.\n（7）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2019-12-22', '2022-12-29');
INSERT INTO `cmc_safe` VALUES ('1648881419099570177', '1648881419099570177', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '1)本项目存在的安全隐患：交通风险、边坡坠物、动植物伤害、物体打击、机械伤害、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n2) 针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度和测绘作业安全操作规程，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）外出就餐注意饮食卫生。，尊重当地民族风俗习惯、本次作业属于高海拔地区，做好高原病预防工作。\n（7）提前了解测区环境，穿戴好劳动防护用品\n（8）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2019-12-16', '2020-08-20');
INSERT INTO `cmc_safe` VALUES ('1648881419112153089', '1648881419112153089', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、防火、防盗、防狗咬等。 \n（二）针对隐患源制定的安全措施：\n（1）测站要远离主干道，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n（2）严禁在高压电线附近作业。\n（3）禁止烟头乱扔，注意作业区周围烟火情况。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）尊重少数民族习惯，搞好团结。\n（6）水上作业和水边作业必须穿载救生衣，进入工区必须佩戴安全帽。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2019-12-11', '2020-02-22');
INSERT INTO `cmc_safe` VALUES ('1648881419128930305', '1648881419128930305', 59, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：溺水、交通风险、边坡坠物、动植物伤害、物体打击、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n（二）针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）提前了解测区环境，穿戴好劳动防护用品.\n（7）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。（6）水上作业和水边作业必须穿载救生衣，进入工区必须佩戴安全帽。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2019-12-29', '2022-06-24');
INSERT INTO `cmc_safe` VALUES ('1648881419191844866', '1648881419191844866', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '1)本项目存在的安全隐患：交通风险、边坡坠物、动植物伤害、物体打击、机械伤害、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n2) 针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度和测绘作业安全操作规程，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）外出就餐注意饮食卫生。，尊重当地民族风俗习惯、本次作业属于高海拔地区，做好高原病预防工作。\n（7）提前了解测区环境，穿戴好劳动防护用品\n（8）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2019-12-02', '2020-01-02');
INSERT INTO `cmc_safe` VALUES ('1648881419254759426', '1648881419254759426', NULL, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通风险、边坡落石、高处坠落、坍塌、触电、动植物伤害、临水边测量溺水、摔倒等安全风险。 \n（二）针对隐患源制定的安全措施：\n1.交通风险及防范措施\n（1）驾驶员必须严格遵守《中华人民共和国道路交通法》及成勘院测绘公司交通安全管理规章制度；应积极参加安全培训，并不断的提高自己的业务水平。\n（2）公路边、施工区内测量时，须将车辆停放停靠在安全、妥善的地点，不得随意停放，不得将车辆交给他人驾驶。\n（3）车辆应按规定接受年度检验，不得逾期检审，逾期未办理，未按规定检验或检验不合格的，不得上路行驶，应对所驾车辆的制动、转向、灯光等随时进行检查，定期进行车辆的维护及保养。发现车辆有故障时要立即检修，避免造成车辆机械损坏和在运行途中发生交通事故隐患。\n（4）乘坐车辆时应系好安全带，严禁将头、手、身露出车厢外，不乘坐私揽客员的非法车辆，不乘坐超员、超载车辆，文明乘车，遵守乘车规定。\n（5）临水边测量时必须穿戴好救生衣、救生口哨，水边点测量时尽可能使用具备免棱镜测距功能的全站仪，减少由作业人员沿水边线进行前视跑尺。\n（6）遇大风、大雨、大雾等恶劣天气或雨季涨水、上游降水等天气时，严禁水边作业\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2020-01-15', '2020-12-29');
INSERT INTO `cmc_safe` VALUES ('1648881419665801218', '1648881419665801218', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：溺水、交通风险、边坡坠物、动植物伤害、物体打击、坍塌、食物中毒、消防安全、森林火险、防盗等\n（二）针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度、测绘作业安全操作规程及公司新冠肺炎疫情防控方案，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，路边作业穿戴好反光背心等劳动防护用品，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）提前了解测区环境，穿戴好劳动防护用品.\n（7）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2019-12-11', '2020-08-25');
INSERT INTO `cmc_safe` VALUES ('1648881420152340482', '1648881420152340482', 102, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '1)本项目存在的安全隐患：交通风险、边坡坠物、动植物伤害、物体打击、机械伤害、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n2) 针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度和测绘作业安全操作规程，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 严禁水上作业，到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）外出就餐注意饮食卫生。，尊重当地民族风俗习惯。\n（7）提前了解测区环境，穿戴好劳动防护用品\n（8）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2019-12-10', '2020-08-06');
INSERT INTO `cmc_safe` VALUES ('1648881420240420865', '1648881420240420865', 61, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（1)本项目存在的安全隐患：交通风险、边坡坠物、动植物伤害、物体打击、机械伤害、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n2) 针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度和测绘作业安全操作规程，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 严禁水上作业，到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）外出就餐注意饮食卫生。，尊重当地民族风俗习惯。\n（7）提前了解测区环境，穿戴好劳动防护用品\n（8）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2019-11-20', '2020-08-20');
INSERT INTO `cmc_safe` VALUES ('1648881420903120898', '1648881420903120898', 48, 49, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、防火、防盗、防狗咬等。 \n（二）针对隐患源制定的安全措施：\n（1）测站要远离主干道，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n（2）严禁在高压电线附近作业。\n（3）禁止烟头乱扔，注意作业区周围烟火情况。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）尊重少数民族习惯，搞好团结。\n（6）水上作业和水边作业必须穿载救生衣，进入工区必须佩戴安全帽。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2019-05-26', '2021-08-24');
INSERT INTO `cmc_safe` VALUES ('1648881421368688642', '1648881421368688642', 47, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（1)本项目存在的安全隐患：交通风险、边坡坠物、动植物伤害、物体打击、机械伤害、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n2) 针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度和测绘作业安全操作规程，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 严禁水上作业，到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）外出就餐注意饮食卫生。，尊重当地民族风俗习惯。\n（7）提前了解测区环境，穿戴好劳动防护用品\n（8）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2019-10-17', '2022-03-08');
INSERT INTO `cmc_safe` VALUES ('1648881421385465858', '1648881421385465858', 61, 58, '（1） 禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2） 现场办公没有垃圾产生；\n（3） 车辆排放符合国家标准，不会对周围环境产生污染；\n（4） 所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（本项目存在的安全隐患：交通风险、边坡坠物、动植物伤害、物体打击、机械伤害、坍塌、食物中毒、消防安全、森林火险、防盗等\n（二）针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度和测绘作业安全操作规程，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 严禁水上作业，到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）外出就餐注意饮食卫生。，尊重当地民族风俗习惯。\n（7）提前了解测区环境，穿戴好劳动防护用品\n（8）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2019-10-10', '2021-05-28');
INSERT INTO `cmc_safe` VALUES ('1648881421402243074', '1648881421402243074', 46, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '1)本项目存在的安全隐患：交通风险、边坡坠物、动植物伤害、物体打击、机械伤害、坍塌、食物中毒、消防安全、森林火险、防盗等。 \n2) 针对隐患源制定的安全措施：\n（1）严格遵守《测绘人员安全规范》（CH 1016-2008）、《无人机航摄安全作业基本要求》（CHZ 3001-2010）、公司安全管理制度和测绘作业安全操作规程，结合测区实际情况开展班前安全活动。\n（2）测站要远离主干道，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n(3) 严禁水上作业，到水边作业必须穿戴好救生衣。\n (4) 禁止流动吸烟，禁止生火，带火种进入林区，严格遵守森林防火与消防安全相关制度。\n (5) 资料应做好备份，以防丢失；保管好设备防止丢失。\n（6）外出就餐注意饮食卫生。，尊重当地民族风俗习惯。\n（7）提前了解测区环境，穿戴好劳动防护用品\n（8）密切关注测区天气预报，遇特殊天气，及时采取应对措施，严禁冒险作业。\n3）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2019-10-17', '2021-11-27');
INSERT INTO `cmc_safe` VALUES ('1648881421414825986', '1648881421414825986', 101, 58, '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；\n（2）现场办公没有垃圾产生；\n（3）车辆排放符合国家标准，不会对周围环境产生污染；\n（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；\n（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”D/0版本体系文件的相关规定。', '（一）本项目存在的安全隐患：交通安全、防火、防盗、防狗咬等。 \n（二）针对隐患源制定的安全措施：\n（1）测站要远离主干道，养成出工前后检查车辆的习惯，发现问题及时处理，确保行车安全。\n（2）严禁在高压电线附近作业。\n（3）禁止烟头乱扔，注意作业区周围烟火情况。\n（4）资料应做好备份，以防丢失；保管好设备防止丢失。\n（5）尊重少数民族习惯，搞好团结。\n（6）水上作业和水边作业必须穿载救生衣，进入工区必须佩戴安全帽。\n（三）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作。', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 \n（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 \n（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 \n（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 \n（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ', NULL, NULL, '2019-10-10', '2019-11-28');

-- ----------------------------
-- 48、cmc安全要求表
-- ----------------------------
drop table if exists `cmc_safe_request`;
create table `cmc_safe_request`  (
  `request_id`	int 			not null auto_increment comment '常用要求id',
  `safe_type` 	char(1) 		default null comment '安全提示类型（0环境管理要求 1安全生产要求 2信息安全要求）',
  `content` 	varchar(255) 	default null comment '内容',
  primary key (`request_id`)
) engine = innodb comment = 'cmc安全要求表';

-- ----------------------------
-- 初始化-安全要求表数据
-- ----------------------------
INSERT INTO `cmc_safe_request` VALUES (1, '0', '（1）禁止砍伐树木，产生的生活垃圾选择适当位置进行掩埋或放到垃圾桶内；');
INSERT INTO `cmc_safe_request` VALUES (2, '0', '（2）现场办公没有垃圾产生；');
INSERT INTO `cmc_safe_request` VALUES (3, '0', '（3）车辆排放符合国家标准，不会对周围环境产生污染；');
INSERT INTO `cmc_safe_request` VALUES (4, '0', '（4）所用电子产品辐射均符合国家标准，不会对周围环境产生污染；');
INSERT INTO `cmc_safe_request` VALUES (5, '0', '（5）现场作业人员必须严格遵守“中华人民共和国环境保护法”和“质量、环境、职业健康安全管理”E/5版本体系文件的相关规定。');
INSERT INTO `cmc_safe_request` VALUES (6, '1', '（一）本项目安全生产工作目标：');
INSERT INTO `cmc_safe_request` VALUES (7, '1', '（1）确保生产安全事故从业人员死亡率、重伤率为零；');
INSERT INTO `cmc_safe_request` VALUES (8, '1', '（2）不发生负主要责任的一般及以上交通事故；');
INSERT INTO `cmc_safe_request` VALUES (9, '1', '（3）不发生责任性火灾事故，不发生造成人员死亡的非责任性火灾事故；');
INSERT INTO `cmc_safe_request` VALUES (10, '1', '（4）不发生因安全生产、职业健康管理不善，产生对公司声誉造成影响的不良事件；');
INSERT INTO `cmc_safe_request` VALUES (11, '1', '（5）不发生一般及以上突发环境事件；');
INSERT INTO `cmc_safe_request` VALUES (12, '1', '（6）有效防范各类自然灾害，避免人身伤害或财产损失；');
INSERT INTO `cmc_safe_request` VALUES (13, '1', '（7）安全隐患整改回复率100%。 ');
INSERT INTO `cmc_safe_request` VALUES (14, '1', '（二）本项目存在的危险（有害）因素有：');
INSERT INTO `cmc_safe_request` VALUES (15, '1', '高原病、边坡落石、矿区安全风险、城区测量安全风险、森林（草原）火灾、交通事故、机械伤害、边境地区治安安全、城市道路作业交通安全、气象灾害、有人机飞行风险、边坡坠物、水边沟边摔倒、秋冬季森林火险、地质灾害、消防安全、滑倒摔伤、高边坡作业坠落、测绘资料防丢失、食物中毒、动植物伤害、泥石流、雨季洪水、高温中暑、坍塌、冬季防冻、船只倾覆、搬运物品砸伤、无人机等设备安全、气体中毒、临水作业溺水、盗抢、临时用工安全、等风险。');
INSERT INTO `cmc_safe_request` VALUES (16, '1', '（三）针对隐患源制定的安全措施：');
INSERT INTO `cmc_safe_request` VALUES (17, '1', '（1）项目负责人到现场后必须结合实际情况定期对测区进行隐患排查、分析，及时调整应对措施，在确保所有人员对本项目存在的隐患及应对措施知晓后方可开展工作；');
INSERT INTO `cmc_safe_request` VALUES (18, '1', '（2）驾乘人员遵章守纪，驾驶员严禁酒后驾驶、疲劳驾驶、超速行驶，驾车不涉险、不急躁、不开情绪车。乘坐人员不得有影响司机安全驾驶的行为。加强车辆维护保养及车内电器线路安全检查，夏季气温较高，不得将酒精、打火机及香水等易燃物品放置于车内，严防车辆爆胎、自燃等事故发生；');
INSERT INTO `cmc_safe_request` VALUES (19, '1', '（3）所有作业人员必须正确佩戴劳动防护用品，如安全帽、救生衣、安全带、防滑鞋、手套等；');
INSERT INTO `cmc_safe_request` VALUES (20, '1', '（4）项目参与人员保持良好的精神状态，保证充足的睡眠，工作中杜绝侥幸、麻痹、偷懒、逞能、莽撞、心急、烦躁、赌气、自满等不安全心理因素；');
INSERT INTO `cmc_safe_request` VALUES (21, '1', '（5）作业人员严格遵守当地民族风俗习惯、宗教信仰等，作业人员应提前了解所到地区的民族礼仪、习惯及禁忌，避免做出伤害当地居民民族感情的事情，引起民族冲突和发生意外；');
INSERT INTO `cmc_safe_request` VALUES (22, '1', '（6）住宿时应注意用电安全。应使用具有安全认证的电源插座和充电器，并不得超出其额定功率；避免使用同一条线路给多个大功率电池或设备充电；对超过安全容量的充电设备充电时应专人值守；');
INSERT INTO `cmc_safe_request` VALUES (23, '1', '（7）出差（出工）期间不得在宿舍或其他场所内进行黄、赌、毒等违法违纪或其他违反社会道德的行为。出差（出工）期间不得私自外出，必须外出时需得到项目负责人（现场负责人）的同意；');
INSERT INTO `cmc_safe_request` VALUES (24, '1', '（8）进入作业现场集中注意力，远离坑槽、孔洞口，未经许可不得进入受限空间场所，禁止在交叉作业下方等危险区域停留，严禁进入吊装、爆破作业区，防止高处坠落和物体打击等事故发生；');
INSERT INTO `cmc_safe_request` VALUES (25, '1', '（9）进入林区不得携带火种及吸烟，严格遵守当地政府森林草原防火规定，禁止吸烟区域严禁吸烟；');
INSERT INTO `cmc_safe_request` VALUES (26, '1', '（10）在作业过程中，保持场地整洁，做好现场文明施工及周围的环境卫生；');
INSERT INTO `cmc_safe_request` VALUES (27, '1', '（11）做好边坡落石、山体垮塌等自然灾害防范工作，遇到极端天气暂停外业工作，遇5级以上大风、大雨、雷电等极端天气禁止开展外业作业；');
INSERT INTO `cmc_safe_request` VALUES (28, '1', '（12）在搬运设备、材料过程中，做好防护，防止脱落砸伤人员；');
INSERT INTO `cmc_safe_request` VALUES (29, '1', '（13）临空临边作业必须采取防滑、防坠措施，确保人员和设备安全；');
INSERT INTO `cmc_safe_request` VALUES (30, '1', '（13）高处作业人员应佩戴有安全锁的安全带，安全带的使用和保管应符合现行国家标准《安全带》（GB 6095）的有关规定；');
INSERT INTO `cmc_safe_request` VALUES (31, '1', '（14）城区测绘作业严格遵守安全操作规程，穿戴好反光背心，做好过往行人和车辆安全提醒；');
INSERT INTO `cmc_safe_request` VALUES (32, '1', '（15）无人机作业前到相关部门进行飞行前报备，得到许可后方可开展作业，作业要选择合适的天气，避免大风、下雨天气开展作业。无人机起降时设置安全区域警示，做好人员疏散，与工作无人员不得在作业区逗留，避免造成伤害。作业时确保无人机电池、螺旋桨等状态完好，航线设计须满足相关规范要求并达到安全标准；');
INSERT INTO `cmc_safe_request` VALUES (33, '1', '（16）严格遵守《安全生产法》、《测绘作业人员安全规范》等国家法律、法规、标准和公司有关安全生产规章制度、安全操作规程、应急预案；');
INSERT INTO `cmc_safe_request` VALUES (34, '2', '（一）涉密计算机和涉密信息系统管理要求。涉密测绘地理信息必须在涉密计算机或涉密信息系统中存储和处理，涉密计算机应当登记备案并进行标识，涉密信息系统应当符合分级保护要求。涉密计算机和涉密信息系统严禁接入互联网及其他公共信息网络。 ');
INSERT INTO `cmc_safe_request` VALUES (35, '2', '（二）介质使用和保管要求。存储涉密测绘地理信息的涉密移动存储介质不得在非涉密计算机上或非涉密信息系统中使用；非涉密移动存储介质以及手机、音视频播放器等具有存储功能的电子产品不得在涉密计算机或涉密信息系统中使用；严禁非法复制、记录、存储涉密测绘地理信息；不得非法获取、持有涉密测绘地理信息载体。涉密单位承担横向合作项目所持有的涉密载体必须纳入本单位统一管理范围，不留死角。 ');
INSERT INTO `cmc_safe_request` VALUES (36, '2', '（三）涉密计算机外接设备管理要求。存储、处理涉密测绘地理信息的涉密计算机，必须拆除机内无线网卡等无线互联设备，切断无线联网渠道，不得连接无线鼠标、无线键盘等无线外围设备。 ');
INSERT INTO `cmc_safe_request` VALUES (37, '2', '（四）涉密信息系统配置管理要求。涉密单位应当按照分级保护要求，建立涉密测绘地理信息系统设施、设备安全配置和审计制度，严格账户、口令管理，安装病毒防护软件并定期升级。 ');
INSERT INTO `cmc_safe_request` VALUES (38, '2', '（五）涉密载体销毁管理要求。存储和处理涉密测绘地理信息的涉密计算机、涉密移动存储介质的淘汰、销毁，需履行清点登记审批手续，送保密行政管理部门授权的销毁机构或指定的承销单位销毁。 ');

-- ----------------------------
-- 49、cmc技术交底表
-- ----------------------------
drop table if exists `cmc_technical`;
create table `cmc_technical`  (
  `technical_id` 		char(19)  		not null 	comment '技术交底id',
  `project_id` 			char(19)  		default null comment '项目id',
  `disclosure_accepter` bigint  		default null comment '接受交底人',
  `disclosurer` 		bigint  		default null comment '技术交底人',
  `content` 			text  			default null comment '技术交底内容',
  `document` 			varchar(255)	default null comment '附件',
  `disclosure_comment` 	varchar(255)  	default null comment '技术交底意见',
  `accept_comment` 		varchar(255)  	default null comment '接受交底意见',
  `disclosure_time` 	date  			default null comment '技术交底时间',
  `accept_time` 		date  			default null comment '接受交底时间',
  primary key (`technical_id`)
) engine = innodb comment = 'cmc技术交底表';

-- ----------------------------
-- 初始化-技术交底表数据
-- ----------------------------
INSERT INTO `cmc_technical` VALUES ('1648881410631270403', '1648881410631270403', 32, 55, NULL, NULL, '按照交底执行，现场如有变及时反馈', '按交底要求执行', '2023-05-10', '2023-08-04');
INSERT INTO `cmc_technical` VALUES ('1648881410631270410', '1648881410631270410', 61, 55, '1） 本项目执行的规程规范或其他技术文件\n（1）《工程测量标准》GB 50026-2020；\n（2）《全球定位系统实时动态测量（RTK）技术规范》CH/T 2009-2010；\n（3）《国家基本比例尺地图图式第1部分：1:500 1:1000 1:2000地形图图式》GB/T 20257.1-2017； \n（4）《1:500 1:1000 1:2000 外业数字测图技术规程》GB/T 14912-2005\n（5）《测绘成果质量检查与验收》GB/T 24356-2023；\n（6）《数字测绘成果质量检查与验收》GB/T 18316-2008。\n2）主要技术指标及成果要求\n平面坐标系统：成都市平面坐标系；\n高程系统：1956年黄海高程系。\n（1）控制点平面中误差不大于图上0.1mm，高程中误差不大于等高距的1/10。\n（2）1:500地形图采用0.5m等高距，地形类别为平地。地物点平面位置中误差（图上）≤±0.8mm，隐蔽困难地区不超过限差1.5倍；高程中误差≤±h/3。\n3）使用的仪器设备及专业应用软件\n使用仪器为拓普康全站仪1台；中海达GNSS接收机2台；内业处理软件为浩辰CAD、南方CASS10.1等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n（1）控制点测量：在测区布设3个图根控制点、需要两两通视。利用SCCORS采集图根点，每个图根点测回数不少于2次，平面坐标较差不大于图上0.1mm，高程较差不大于等高线的1/10。利用已有的平面高程模型转换到成都市平面坐标系、和1956年黄海高程系。（平面转换完后注意与国土提供图进行比较校核、验证平面转换正确性）。\n（2）地形图外业采用人工实测，地形点点间距不超过15米，地形变化处需要加密地形点。\n（3）内业将外业实测地形、地物数据进行编辑，形成正式地形图。\n（4）利用业主提供的场地平整标高，在南方CASS10.1进行土方量计算，得出土石方平衡报告。\n5）上交成果资料\n（1）控制测量成果、1:500地形图、土石方报告。\n（2）其他资料文档成果按照甲方要求提交以及公司资料归档要求执行。', NULL, '按照交底以及作业计划执行，作业方法以及工作量变化时，及时与相关人员联系', '已接受技术交底。', '2023-07-12', '2023-07-12');
INSERT INTO `cmc_technical` VALUES ('1648881410631270411', '1648881410631270411', 32, 49, '1) 本项目执行的规程规范或其他技术文件\n（1）《工程测量规范》GB 50026-2020；\n（2）《倾斜数字航空摄影技术规程》GB/T 39610-2020；\n（3）《数字航空摄影测量 空中三角测量规范》GB/T 23236-2009；\n（4）《低空数字航摄与数据处理规范》GB/T 39612-2020；\n（5）《三维地理信息模型数据产品规范》CH/T 9015-2012；\n（6）《测绘成果质量检查与验收》GB/T 24356-2023；《数字测绘成果质量检查与验收》GB/T 18316-2008。\n2) 主要技术指标及成果要求\n平面坐标系统：2000国家大地坐标系；\n高程系统：1985国家高程基准。\n（1）1:1000比例尺，影像地面分辨率优于10cm；\n（2）测区地形类别为丘陵地，地物点平面位置中误差≤±0.8m，高程点中误差≤±1.0m，隐蔽困难地区放宽0.5倍。\n（3）实景三维模型的模型精细度和纹理精细度按照Ⅱ级进行处理。', NULL, NULL, '按交底内容进行作业', '2023-07-14', '2023-07-14');
INSERT INTO `cmc_technical` VALUES ('1648881410631270428', '1648881410631270428', 143, 143, '测区已有控制点，现场复核检校使用', NULL, NULL, '已知晓', '2024-03-15', '2024-03-26');
INSERT INTO `cmc_technical` VALUES ('1648881410631270429', '1648881410631270429', 83, 49, NULL, NULL, NULL, '严格按技术交底要求作业，现场与后方保持联系。', '2024-02-23', '2024-02-23');
INSERT INTO `cmc_technical` VALUES ('1648881410631270430', '1648881410631270430', 76, 46, '1）本项目执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T35029-2014；《全球定位系统实时动态测量（RTK）技术规范》CH/T 2009-2010。 \n（2）《测绘成果质量检查与验收》GB/T 24356-2023。\n2）主要技术指标及成果要求\n（1）平面坐标系统：2000国家大地坐标系；高程系统：1985国家高程基准。\n（2）断面基点按规范要求埋设，平面为五等；高程按四等三角高程联测；\n（3）断面按1:500比例尺施测。断面图和成果表满足用户要求。\n（4）地物点按图根精度施测。\n3）使用的仪器设备及专业应用软件\n全站仪、GNSS接收机、无人测量船、电脑；浩辰CAD、南方CASS等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。 \n4）作业方法\n断面基点按五等精度采集SCCORS信号获取坐标，由自然资源部第三大地测量队进行高程转换，左右基点对向三角高程联测。断面测量岸上部分采用RTK结合全站仪施测，水下断面采用无人测量船测量。地物点高程测量采集SCCORS获得并通过由基点建立的高程转换模型进行转换。\n5）上交成果资料\n（1）断面基点成果，横断面成果。\n（2）地物点高程成果。\n（3）测绘作业计划及测量报告等。\n（4）其它资料见测绘作业计划。', NULL, '按技术交底要求作业。', '已技术交底，作业过程中按要求执行', '2024-02-27', '2024-02-27');
INSERT INTO `cmc_technical` VALUES ('1648881410631270431', '1648881410631270431', 71, 49, NULL, NULL, NULL, '按公司安全要求进行安全生产。', '2024-02-25', '2024-02-25');
INSERT INTO `cmc_technical` VALUES ('1648881410631270432', '1648881410631270432', 83, 49, NULL, NULL, NULL, '严格按照要求作业。', '2024-03-13', '2024-03-15');
INSERT INTO `cmc_technical` VALUES ('1648881410631270434', '1648881410631270434', NULL, 49, NULL, NULL, NULL, NULL, '2024-03-13', NULL);
INSERT INTO `cmc_technical` VALUES ('1648881410631270435', '1648881410631270435', 71, 49, NULL, NULL, NULL, '按公司安全要求进行安全生产。', '2024-03-18', '2024-03-18');
INSERT INTO `cmc_technical` VALUES ('1648881410631270436', '1648881410631270436', 83, 46, '1）本项目主要执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T 35029-2014； \n（2）《测绘成果质量检查与验收》GB/T 24356-2023。\n2）主要技术指标及成果要求\n（1）平面坐标系统：2000米林坐标系；高程系统：1985国家高程基准。\n（2）断面基点的平面及高程测量按照五等平面和四等三角高程的精度。\n（3）断面测量、水边线测量按《水电工程测量规范》执行。\n（4）流量测验满足用户需求。\n3）使用的仪器设备及专业应用软件\n使用仪器为全站仪、GNSS接收机、无人测量船；内业处理软件为浩辰CAD、南方CASS等。所用仪器在投入工程前均检定合格，并在检定有效期内。 \n4）作业方法\n（1）断面位置按用户设计图施测，断面基点平面和高程按五等/四等，困难断面可做单基点。\n（2）岸上断面采用已有激光点云结合现场实测，水下断面点采用无人船测量。\n（3）水边线测量提交3次成果（高水、中水、低水各测量1次）。\n（4）流量测验以用户要求为准。\n5）上交成果资料\n（1）断面成果。\n（2）水边线成果。\n（3）测绘作业计划及测量报告等（电子版及纸质资料）。\n（4）其它资料见测绘作业计划。', NULL, '按交底要求作业。', '已进行技术交底，严格按照相关要求执行。', '2024-04-01', '2024-04-01');
INSERT INTO `cmc_technical` VALUES ('1648881410631270437', '1648881410631270437', 94, 46, '1）本项目执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T35029-2014； \n（2）《测绘成果质量检查与验收》GB/T 24356-2023。\n2）主要技术指标及成果要求\n（1）平面坐标系统：近似1954年北京坐标系；高程系统：1956年黄海高程系。\n（2）标志牌制作尺寸、埋设标准由成都院项目部确定，测设高程精度满足图根点要求。\n3）使用的仪器设备及专业应用软件\n使用仪器为全站仪、GNSS接收机；内业处理软件为浩辰CAD、南方CASS等。所用仪器在投入工程前均检定合格，并在检定有效期内。 \n4）作业方法\n（1）点位选择由作业队现场选定并参照业主意见。\n（2）制作、土建按业主要求执行。\n（3）收集并利用双江口水电站坝区、库区测量控制点，进行标志牌坐标、高程的施测。\n5）上交成果资料\n（1）现场工作照、点位照。\n（2）标志牌测设成果。\n（3）测绘作业计划及测量报告等（电子版及纸质资料）。\n（4）其它资料见测绘作业计划。', NULL, '按交底要求作业。', '按以上交底内容进行现场工作。', '2024-04-01', '2024-04-01');
INSERT INTO `cmc_technical` VALUES ('1648881410631270439', '1648881410631270439', 32, 49, NULL, NULL, NULL, '按要求进行作业', '2024-04-18', '2024-04-19');
INSERT INTO `cmc_technical` VALUES ('1648881410631270440', '1648881410631270440', 60, 46, '1）本项目执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T35029-2023；《全球定位系统实时动态测量（RTK）技术规范》CH/T 2009-2010。 \n（2）《测绘成果质量检查与验收》GB/T 24356-2023。\n2）主要技术指标及成果要求\n（1）平面坐标系统：2000国家大地坐标系；高程系统：1985国家高程基准。\n（2）比例尺为1:10000，地形类别为山地，地形图基本等高距为5m。地形图修补测、水下地形满足《水电工程测量规范》NB/T35029-2023要求。\n3）使用的仪器设备及专业应用软件\n全站仪、GNSS接收机、无人测量船、电脑；浩辰CAD、南方CASS等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n采集SCCORS信号获取测点坐标高程，由大地高和已有地形图注记点高程建立高程转换模型。水下地形采用无人测量船测量。\n5）上交成果资料\n（1）地形图成果。\n（2）测绘作业计划及测量报告等。\n（3）其它资料见测绘作业计划。', NULL, '按技术交底要求作业。', '按照技术交底执行作业。', '2024-04-29', '2024-04-29');
INSERT INTO `cmc_technical` VALUES ('1648881410631270441', '1648881410631270441', 33, 49, NULL, NULL, NULL, '已交底', '2024-04-24', '2024-04-25');
INSERT INTO `cmc_technical` VALUES ('1648881410631270444', '1648881410631270444', 32, 49, NULL, NULL, NULL, '按交底内容执行', '2024-05-06', '2024-05-06');
INSERT INTO `cmc_technical` VALUES ('1648881410631270449', '1648881410631270449', NULL, 49, NULL, NULL, NULL, NULL, '2024-06-06', NULL);
INSERT INTO `cmc_technical` VALUES ('1648881410631270452', '1648881410631270452', NULL, 49, NULL, NULL, '按技术交底执行', NULL, '2024-01-15', NULL);
INSERT INTO `cmc_technical` VALUES ('1648881410631270463', '1648881410631270463', 72, 46, '1）本项目主要执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T 35029-2023； \n（2）《测绘成果质量检查与验收》GB/T 24356-2023。\n2）主要技术指标及成果要求\n（1）平面坐标系统：2000国家大地坐标系；高程系统：1985国家高程基准。\n（2）断面基点测量按照五等平面精度。\n（3）断面测量按《水电工程测量规范》执行。\n（4）流量测验满足用户需求。\n3）使用的仪器设备及专业应用软件\n使用仪器为全站仪、GNSS接收机、无人测量船、流速仪；内业处理软件为浩辰CAD、南方CASS等。所用仪器在投入工程前均检定合格，并在检定有效期内。 \n4）作业方法\n（1）断面位置按用户设计图施测，断面基点平面五等，做单基点。采集CORS信号，高程通过测绘局转换；建立测区高程转换模型。\n（2）岸上断面现场实测，水下断面点采用无人船测量。\n（3）流量测验以用户要求为准。\n5）上交成果资料\n（1）断面成果、基点成果。\n（2）流量测验成果。\n（3）技术设计书及测量报告等（电子版及纸质资料）。\n（4）其它资料见技术设计书。', NULL, '按技术交底要求作业。', '同意', '2024-05-12', '2024-05-12');
INSERT INTO `cmc_technical` VALUES ('1648881410631270465', '1648881410631270465', 71, 49, NULL, NULL, '', '按技术要求进行作业', '2024-06-20', '2024-06-20');
INSERT INTO `cmc_technical` VALUES ('1648881410694184962', '1648881410694184962', 32, 46, '1) 本项目执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T 35029-2014；\n（2）《水电工程三维激光扫描测量规程》NB/T 35109-2018；《机载激光雷达数据获取技术规范》CH/T 8024-2011；《机载激光雷达数据处理技术规范》CH/T 8023-2011；\n（3）《国家基本比例尺地图图式第1部分：1:500 1:1000 1:2000地形图图式》GB/T 20257.1-2017；《国家基本比例尺地图图式第2部分：1:5000 1:10000地形图图式》GB/T 20257.2-2017；\n（4）《测绘成果质量检查与验收》GB/T 24356-2009；《数字测绘成果质量检查与验收》GB/T 18316-2008。\n2) 主要技术指标及成果要求\n平面坐标系统：2000国家大地坐标系；\n高程系统：1985国家高程基准。\n（1）五等控制点点位中误差大不于5cm，边长相对中误差小于1/20000，高程分别以相邻控制点内部联测，闭合差小于20 mm。\n（2）1:2000地形图采用2.0m等高距，地形类别为山地。地物点平面位置中误差（图上）≤±0.8mm；图幅等高线高程中误差≤±2h/3、高程注记点中误差≤±h/3，h为等高距。\n（3）1:5000地形图采用5.0m等高距，地形类别为山地。地物点平面位置中误差（图上）≤±0.75mm；图幅等高线高程中误差≤±2h/3、高程注记点中误差≤±h/3，h为等高距。\n（4）三维激光扫描采集的激光点云应分布均匀，统一按1:2000精度采集，激光点云地面点密度应大于1点/m2；航空影像分辨率优于0.2m。\n3) 使用的仪器设备及专业应用软件\n使用仪器为飞马DV-LiDAR22激光雷达系统一套，飞行平台采用飞马D20旋翼无人机；拓普康全站仪1台；中海达GNSS接收机2台；内业处理软件为CoPre和TerraSolid 9.0、浩辰CAD、南方CASS等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4) 作业方法\n（1）地形图外业采用无人机搭载激光雷达地面扫描和航空摄影采集地面数据。\n（2）内业通过点云处理，生成DEM构等高线。生产DOM采集地物，最后将地物与等高线套合编辑，出地形图成果。\n（3）外业采用电子调绘系统进行现场调绘工作。\n（4）外业采用常规全站仪、GNSS-RTK进行打点检查；地形图检查点应覆盖不同的航摄分区及结合处，不同的高程面，包括重要工程部位。\n（5）内业将外业调绘、修补测等成果进行编辑，形成正式地形图。\n注：1、点云解算前应通过外业测点检查成果质量；\n2、首件产品应及时提交技术质量部检查。\n5) 上交成果资料\n（1）1:2000地形图、1:5000地形图。\n（2）航测采集成果、数据处理成果资料。\n（3）测绘作业计划及测量报告等。\n（4）其它资料见测绘作业计划。', NULL, '按技术交底要求作业。', '按技术交底要求进行作业。', '2023-03-22', '2023-03-22');
INSERT INTO `cmc_technical` VALUES ('1648881410878734337', '1648881410878734337', 61, 55, NULL, NULL, '按照要求执行，如现场实施方案有变，及时反馈。 ', '已接受技术交底，现场按要求开展作业。', '2023-03-01', '2023-08-07');
INSERT INTO `cmc_technical` VALUES ('1648881411067478017', '1648881411067478017', 61, 46, '1）本项目执行的规程规范、技术文件\n（1）《水电工程测量规范》NB/T 35029-2014；\n（3）《水文测量规范》SLS8-2014；\n（4）《水库水文泥沙观测规范》（SL 339-2006）；\n（5）《测绘成果质量检查与验收》GB/T 24356-2009；\n（6）《数字测绘成果质量检查与验收》GB/T 18316-2008。\n2）主要技术指标及成果要求\n（1）平面坐标系统：雅砻江坐标系；高程系统：1985国家高程基准。\n（2）控制点平面采用二等、三等GNSS测量，高程采用三等三角高程测量；\n二等GNSS相邻点平均边长大不于13km，相应等级控制网的固定和比例误差为10mm及2mm/km，最弱相邻点边长相对中误差小于1/150000。\n三等GNSS平均边长4km～8km，相应等级控制网的固定和比例误差10mm及5mm/km，最弱边相对中误差小于1/80000。\n三等电磁波测距三角高程测量每条边对向观测高差之较差不超过±35√D，附（闭）合路线闭合差不大于±12√D，单程双测高差较差不大于±8√D，单位mm。其中D为水平距离，单位km。\n（3）断面基点高程为四等高程、平面为五等。\n（4）断面点密度（测点间距）按1:1000地形测量规范要求进行测定，断面点间距5～10m，最大点间距不大于15m，水下测点应不少于5点。对水深变化大的区域适当加密测点，尽可能测量到地形变化的特征点。\n3）使用的仪器设备及专业应用软件\n全站仪、GNSS接收机、全数字双变频测深仪、无人测量船S-11、南方CASS10.1、航天远景。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n（1）控制点平面采用二等、三等GNSS测量，高程采用三等三角高程测量；平面起算搜集测区附近国家点进行联测，高程控制联测两河口施工控制网成果，同时联测测区附近国家高程点校核；\n（2）断面基点高程采用四等三角高程测量、平面采用采用GNSS-RTK进行定位，也可采用五等导线测量、GNSS静态控制测量方法获取平面位置；\n（3）断面测量分为岸上部分和水下部分，岸上部分采用GNSS-RTK、全站仪等方式完成，高程测至水库正常蓄水位2865m以上，水下部分采用机动船搭载全数字双变频测深仪完成库区平水段水深测量，库尾自然河段采用无人测量船完成测量，横断面线需要垂直河道。点间距5~15m。\n4）上交成果资料\n（1）控制点成果表、断面基点成果表、断面累距成果表、横断面布置图等。\n（3）测绘作业计划及测量报告等。\n（4）其它资料见测绘作业计划。', NULL, '按技术交底要求作业。', '技术交底已完成，按要求开展作业。', '2023-02-28', '2023-02-28');
INSERT INTO `cmc_technical` VALUES ('1648881411138781187', '1648881411138781187', 60, 55, '1）本项目执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T 35029-201428\n（2）《低空数字航摄与数据处理规范》GB/T 39612-2020；\n（3）国家基本比例尺地图图式第1部分：1:500 1:1000 1:2000地形图图式》GB/T 20257.1-2017\n（4）《测绘成果质量检查与验收》GB/T 24356-2023；\n（5）《数字测绘成果质量检查与验收》GB/T 18316-2008。\n2）主要技术指标及成果要求\n平面坐标系统：2000国家大地坐标系。\n高程系统：1985国家高程基准。\n（1）五等GNSS控制点平面最弱相邻点中误差不大于图上±0.05mm，高程最弱点高程不大±h/20（h为地形图基本等高距）。\n（2）测区地形类别为山地。1:2000采用2.0m等高距。1:2000地物点平面位置中误差（图上）≤±0.8mm；图幅等高线高程中误差≤±2h/3、高程注记点中误差≤±h/3，h为等高距。\n（3）1:2000地形图航空影像分辨率分别不低于0.2m。\n（4）收集已有控制资料、平面和高程转换模型、激光点云数据以及影像资料。 \n3）使用的仪器设备及专业应用软件\n飞行平台采用大疆无人机；拓普康全站仪2台；中海达GNSS接收机2台；内业处理软件为航天远景、浩辰CAD、南方CASS、Pix4d、TerraSolid 9.0等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n（1）五等GNSS利用RTK测量时宜采用三脚架对中、整平，天线高度量取精确至1mm，接收有效卫星数不宜少于5个，PDOP值应小于6，接收机的平面精度限制宜设置为20mm，高程精度限制设置为30mm。平滑采集≥3次，每次采集需复位GNSS接收机，取三次的平均值作为最终成果。\n（2）利用网络RTK采集已有控制点的CGCS2000平面坐标和大地高，建立平面和高程转换关系。\n（3）测区采用无人机航空摄影采集影像数据。需要布设像控点，已有激光的区域，经检查满足精度要求后，利用原有激光处理后加上外业检查点生产DEM构成等高线。\n（4）内业通过影像空三加密后，利用DOM采集地物，最后将地物与等高线套合编辑，形成地形图成果。\n（5）外业采用电子调绘系统进行现场调绘工作。\n（6）外业采用常规全站仪、GNSS-RTK进行检查点测量；地形图检查点应尽力在隐蔽地方以及地形突变的地方。\n（7）内业将外业调绘、检查点修补测等成果进行编辑，形成正式地形图。\n注：首件产品应及时提交技术质量部检查。\n5) 上交成果资料\n（1）地形图成果。\n（2）航测采集成果、数据处理成果资料。（3）测绘作业计划及计算资料、测量报告等。', NULL, '按照交底以及作业计划执行，作业方法以及工作量变化时，及时与相关人员联系反馈', '\n按照公司安全生产规定开展作业。 ', '2023-12-18', '2023-12-26');
INSERT INTO `cmc_technical` VALUES ('1648881411499491330', '1648881411499491330', NULL, 55, '1）本项目执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T 35029-201428\n（2）国家基本比例尺地图图式第1部分：1:500 1:1000 1:2000地形图图式》GB/T 20257.1-2017\n（3）《测绘成果质量检查与验收》GB/T 24356-2023；\n（4）《数字测绘成果质量检查与验收》GB/T 18316-2008。\n2）主要技术指标及成果要求\n平面坐标系统：2000国家大地坐标系、雅砻江坐标系。\n高程系统：1985国家高程基准。\n测量点包括横断面、桥墩和桥台平面和高程精度按照图根等级要求执行。\n3）使用的仪器设备及专业应用软件\n拓普康全站仪2台；中海达GNSS接收机2台；、浩辰CAD、南方Cass10.1。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n （1）测量前和甲方负责人沟通测量要求、成果文件格式以及测量范围。\n（2）收集已有控制资料、桥梁设计使用地形图、竣工图以及测区平面和高程转换模型。\n（3）采用全站仪和RTK相结合的方式对桥对墩、桥台位置以及桥梁中轴线横断面进行测量，并拍摄不同角度的桥梁照片，照片命名和桥梁名字一致。\n（4）利用采集特征数据点在南方Cass10.1绘制断面图和剖面图。\n注：首件产品应及时提交技术质量部检查和甲方确认是否满足其设计要求。\n5) 上交成果资料\n（1）断面形态以及桥墩、桥台的形态成果包含桥梁照片。\n（2）数据处理成果资料。（3）测绘作业计划及计算资料、测量报告等。', NULL, '按照技术交底和甲方要求进行测量，工作量变化以及测量方法变化时应及时和相关人员联系', NULL, '2023-12-06', NULL);
INSERT INTO `cmc_technical` VALUES ('1648881411499491333', '1648881411499491333', NULL, 55, '1）本项目执行的规程规范或其他技术文件\n（1）《工程测量标准》GB 50026-2020\n（2）《全球定位系统实时动态测量（RTK）技术规范》CH/T 2009-2010\n（3）《低空数字航摄与数据处理规范》GB/T 39612-2020\n（4）《机载激光雷达数据获取技术规范》CH/T 8024-2011\n（5）《机载激光雷达数据处理技术规范》CH/T 8023-2011\n（6）《数字航空摄影测量 空中三角测量规范》GB/T 23236-2009\n（7）《国家基本比例尺地图图式第1部分：1:500 1:1000 1:2000地形图图式》\nGB/T 20257.1-2017\n（8）《测绘成果质量检查与验收》GB/T 24356-2023；\n（9）《数字测绘成果质量检查与验收》GB/T 18316-2008。\n2）主要技术指标及成果要求\n平面坐标系统：2000国家大地坐标系； \n高程系统：1985国家高程基准。\n（1）四等GNSS网，最弱相邻点边长相对中误差小于1/60000（合同要求）。四等三角高程闭合或附合差不大于20√Dmm。\n（2）1:2000地形图地形类别为山地。等高距为2.0m。地物点平面位置中误差（图上）≤±0.8mm，隐蔽困难地区放宽0.5倍，但不大于图上±1.0mm，图幅等高线高程中误差≤±2/3h、高程注记点中误差≤±h/3，h为等高距。\n（4）三维激光扫描采集的激光点云应分布均匀，按照1:2000精度执行。点云密度不小于0.75点/m2；地形图航空影像分辨率不低于0.2m。 \n3）使用的仪器设备及专业应用软件\n使用仪器为双龙头XC-25+ AS1300HL多平台激光雷达系统以及V10+LIDAR20 和V10+LIDAR22进行激光和影像数据采集；拓普康全站仪2台；中海达GNSS接收机8台；内业处理软件为CoPre和TerraSolid 9.0、HGO、Hi-Target Business Center、科傻、航天远景、浩辰CAD、南方CASS10.1、Pix4d等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n（1）在测区均匀做6个四等GNSS点，采用埋石且带标芯。每个控制点需要现场拍摄照片，静态观测时间不少于45min，收集河湖划界控制资料，将新做控制和测区已有静态资料重新整理，采用约束平差进行平差。每个控制点需要利用千寻采集进行不少于三次采集。\n（2）选择离新做控制点较近的已有控制点对新做控制点进行四等三角高程联测，根据新作控制点和已有控制资料建立测区大地高到1985国家高程基准的转换模型。\n（3）根据航线布设和航摄分区测设像控点（做空三检查用）。\n（4）地形图外业采用无人机搭载激光雷达地面扫描和航空摄影采集地面数据。。\n（5）通过空三加密后输出DOM，经检查DOM平面精度满足规范要求后，利用DOM采集地物，点云分类后，利用地面点生成DEM构成等高线最后将地物与等高线套合编辑，出地形图成果。\n（6）外业采用电子调绘系统进行现场调绘工作，包括地名、地类、管线、房屋结构和层数。\n（7）外业采用常规全站仪、GNSS-RTK进行检查点测量；地形图检查点应尽量覆盖不同的航摄分区及结合处，不同的高程面。\n（8）内业将外业检查点、调绘内容、修补测等成果进行编辑，并且与其他标段接边检查后形成正式地形图。\n注：1、点云解算前应通过外业测点检查成果质量；\n2、首件产品（点云以及地形图）应及时提交技术质量部检查。\n5）上交成果资料：\n（1）四等控制（包括点之记）、地形图成果资料；\n（2）航测采集成果、数据处理成果资料。（3）测绘作业计划及计算资料测量报告等。', NULL, '按照交底以及作业计划执行，作业方法以及工作量变化时，及时与相关人员联系反馈', NULL, '2023-12-08', NULL);
INSERT INTO `cmc_technical` VALUES ('1648881411499491334', '1648881411499491334', NULL, 55, '1）本项目执行的规程规范或其他技术文件\n（1）《工程测量标准》GB 50026-2020\n（2）《全球定位系统实时动态测量（RTK）技术规范》CH/T 2009-2010\n（3）《低空数字航摄与数据处理规范》GB/T 39612-2020\n（4）《数字航空摄影测量 空中三角测量规范》GB/T 23236-2009\n（5）《国家基本比例尺地图图式第1部分：1:500 1:1000 1:2000地形图图式》\nGB/T 20257.1-2017\n（6）《测绘成果质量检查与验收》GB/T 24356-2023；\n（7）《数字测绘成果质量检查与验收》GB/T 18316-2008。\n2）主要技术指标及成果要求\n平面坐标系统：2000国家大地坐标系； \n高程系统：1985国家高程基准。\n（1）四等GNSS网，最弱相邻点边长相对中误差小于1/60000（合同要求）。四等三角高程闭合或附合差不大于20√Dmm。\n（2）1:2000地形图地形类别为山地。等高距为2.0m。地物点平面位置中误差（图上）≤±0.8mm，隐蔽困难地区放宽0.5倍，但不大于图上±1.0mm，图幅等高线高程中误差≤±2/3h、高程注记点中误差≤±h/3，h为等高距。\n（3）地形图航空影像分辨率不低于0.2m。\n3）使用的仪器设备及专业应用软件\n使用仪器为双龙头XC-25固定翼无人机搭载航摄仪器进行影像数据采集；拓普康全站仪2台；中海达GNSS接收机8台；内业处理软件为、航天远景、浩辰CAD、南方CASS10.1、Pix4d等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n（1）收集河湖划界控制资料，在测区新做4个四等GNSS点，采用埋石且带标芯。每个控制点需要现场拍摄照片，静态观测时间不少于45min，，将新做控制和测区已有控制静态资料重新整理，采用约束平差进行平差。每个控制点需要利用千寻采集进行不少于三次采集。\n（2）选择离新做控制点较近的已有控制点对新做控制点进行四等三角高程联测，根据新作控制点和已有控制资料建立测区大地高到1985国家高程基准的转换模型。\n（3）根据航线布设和航摄分区测设像控点。\n（4）地形图外业采用无人机航空摄影采集地面数据。满足立体测图要求，尽量垂直山体飞行。\n（5）通过空三加密后恢复立体，利用立体模型采集地物和等高线。\n（6）外业采用电子调绘系统进行现场调绘工作，包括地名、地类、管线、房屋层数。\n（7）外业采用常规全站仪、GNSS-RTK进行检查点测量；地形图检查点应覆盖不同的航摄分区及结合处，不同的高程面以及地形变化处。\n（8）内业将外业检查点、调绘内容、修补测等成果进行编辑，形成正式地形图。\n注：首件产品应及时提交技术质量部检查。\n5）上交成果资料\n（1）等控制（包括点之记）、地形图成果资料；\n（2）航测采集成果、数据处理成果资料。（3）测绘作业计划及计算资料测量报告等。', NULL, '按照交底以及作业计划执行，作业方法以及工作量变化时，及时与相关人员联系反馈', NULL, '2023-12-08', NULL);
INSERT INTO `cmc_technical` VALUES ('1648881411499491336', '1648881411499491336', 60, 55, '1）本项目执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T 35029-2014；\n（2）《国家基本比例尺地图图式第2部分：1:5000 1:10000地形图图式》GB/T 20257.2-2017；\n（3）《数字航空摄影测量 空中三角测量规范》GB/T 23236-2009；\n（4）《测绘成果质量检查与验收》GB/T 24356-2023；\n（5）《数字测绘成果质量检查与验收》GB/T 18316-2008。\n2）主要技术指标及成果要求\n平面坐标系统：2000国家大地坐标系； \n高程系统：1985国家高程基准。\n（1）五等GNSS控制点平面最弱相邻点中误差不大于图上±0.05mm，高程最弱点高程不大±h/20（h为地形图基本等高距）。四等三角高程闭合或附合差不大于20√Dmm。\n（2）1:5000地形图，地形类别为山地。等高距为5.0m。地物点平面位置中误差（图上）≤±0.75mm，隐蔽困难地区放宽0.5倍，但不大于图上±1.0mm，图幅等高线高程中误差≤±2/3h、高程注记点中误差≤±h/3，h为等高距。\n3）使用的仪器设备及专业应用软件\n拓普康全站仪1台；中海达GNSS接收机2台；内业处理软件为：GodWork-AT、航天远景、浩辰CAD、南方CASS10.1等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n（1）五等控制利用SCCORS采集，平滑不少于3次。控制点现场采用刻石或埋石。高程利用自然资源部第三大地测量队进行解算获得1985国家高程基准成果。选择其中一个控制点进行四等三角高程对向观测，检查控制点之间高程较差是否符合要求。\n（2）外业根据卫片现场选刺像控点，内业进行空三加密。检查正确后进行立体采集地物和地形。\n（3）外业采用电子调绘系统或地形图进行现场调绘工作\n（4）外业采用常规全站仪、GNSS-RTK进行检查点测量；地形图检查点应覆盖不同的高程面、房屋、道路等地形、地物特征点。\n（5）内业将外业调绘、修补测、检查点等成果进行编辑，形成正式地形图。\n注： 空三加密以及首件产品应及时提交技术质量部检查。\n5）上交成果资料\n（1）五等控制、地形图\n（2）航测采集成果、数据处理成果资料。（3）测绘作业计划及测量报告等。', NULL, '按照交底以及作业计划执行，作业方法以及工作量变化时，及时与相关人员联系反馈', '按照技术交底执行。', '2023-11-27', '2023-12-06');
INSERT INTO `cmc_technical` VALUES ('1648881411499491346', '1648881411499491346', NULL, 49, NULL, NULL, NULL, NULL, '2023-10-20', NULL);
INSERT INTO `cmc_technical` VALUES ('1648881411499491347', '1648881411499491347', NULL, 55, '1）本项目执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T 35029-2014；\n（2）《水电工程三维激光扫描测量规程》NB/T 35109-2018；\n（3）《低空数字航摄与数据处理规范》GB/T 39612-2020；\n（4）《国家基本比例尺地图图式第1部分：1:500 1:1000 1:2000地形图图式》GB/T 20257.1-2017；\n（8）《测绘成果质量检查与验收》GB/T 24356-2023；\n（9）《数字测绘成果质量检查与验收》GB/T 18316-2008。\n2）主要技术指标及成果要求\n平面坐标系统：2000国家大地坐标系； \n高程系统：1985国家高程基准。\n（1）四等GNSS网，最弱相邻点边长相对中误差小于1/40000。四等三角高程闭合或附合差不大于20√Dmm。\n（2）1:2000地形图地形类别为山地。等高距为2.0m。地物点平面位置中误差（图上）≤±0.8mm，隐蔽困难地区放宽0.5倍，但不大于图上±1.0mm，图幅等高线高程中误差≤±2/3h、高程注记点中误差≤±h/3，h为等高距。\n（4）三维激光扫描采集的激光点云应分布均匀，按照1:2000精度执行。点云密度不小于0.75点/m2；地形图航空影像分辨率不低于0.2m。\n3）使用的仪器设备及专业应用软件\n使用仪器为AU20激光雷达系统一套，飞行平台采用大黄蜂；拓普康全站仪2台；中海达GNSS接收机4台；内业处理软件为CoPre和TerraSolid 9.0、航天远景、浩辰CAD、南方CASS10.1、Pix4d等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n（1）上下库各做3个四等GNSS点，采用埋石且带标芯。每个控制点需要现场拍摄照片（远景和近景各一张），静态观测时间不少于45min，采用一点一方向进行平差。每个控制点需要利用四川CORS进行不少于三次采集。（千寻采集要和四川CORS采集比较）\n（2）在测区四周均匀布设高程模型转换，高程利用自然资源部第三大地测量队进行解算获得1985国家高程基准成果。建立测区大地高到1985国家高程基准的转换模型。选择其中一个控制点作为起算点对测区控制点进行四等三角高程联测，上下库内部串通。\n（4）根据航线布设和航摄分区布设少量像控点（主要检查空三精度），像控点按照图根精度采集。\n（5）地形图外业采用无人机搭载激光雷达地面扫描和航空摄影采集地面数据。满足立体测图要求，尽量垂直山体飞行。\n（6）通过空三加密后生产DOM采集地物，点云分类后，利用地面点生成DEM构成等高线最后将地物与等高线套合编辑，出地形图成果。\n（7）外业采用电子调绘系统进行现场调绘工作，包括地名、地类、管线、房屋结构和层数。\n（8）外业采用常规全站仪、GNSS-RTK进行检查点测量；地形图检查点应覆盖不同的航摄分区及结合处，不同的高程面，包括重要工程部位。\n（9）内业将外业调绘、修补测等成果进行编辑，形成正式地形图。\n注：1、点云解算前应通过外业测点检查成果质量；\n2、首件产品（点云以及地形图）应及时提交技术质量部检查。\n5）上交成果资料\n（1）四等控制、地形图\n（2）航测采集成果、数据处理成果资料。（3）测绘作业计划及计算资料、测量报告等。', NULL, '按照交底以及作业计划执行，作业方法以及工作量变化时，及时与相关人员联系。', NULL, '2023-10-11', NULL);
INSERT INTO `cmc_technical` VALUES ('1648881411499491348', '1648881411499491348', NULL, 55, '1）本项目执行的规程规范或其他技术文件\n（1）《工程测量标准》GB 50026-2020\n（2）《全球定位系统实时动态测量（RTK）技术规范》CH/T 2009-2010\n（3）《低空数字航摄与数据处理规范》GB/T 39612-2020\n（4）《机载激光雷达数据获取技术规范》CH/T 8024-2011\n（5）《机载激光雷达数据处理技术规范》CH/T 8023-2011\n（6）《数字航空摄影测量 空中三角测量规范》GB/T 23236-2009\n（7）《国家基本比例尺地图图式第1部分：1:500 1:1000 1:2000地形图图式》\nGB/T 20257.1-2017\n（8）《测绘成果质量检查与验收》GB/T 24356-2023；\n（9）《数字测绘成果质量检查与验收》GB/T 18316-2008。\n2）主要技术指标及成果要求\n平面坐标系统：2000国家大地坐标系以及工程坐标系(如果有老图应与老图坐标系一致)； \n高程系统：1985国家高程基准。\n（1）四等GNSS网，最弱相邻点边长相对中误差小于1/40000。四等三角高程闭合或附合差不大于20√Dmm。\n（2）1:1000地形图地形类别为山地。等高距为1.0m。地物点平面位置中误差（图上）≤±0.8mm，隐蔽困难地区放宽0.5倍，但不大于图上±1.0mm，图幅等高线高程中误差≤±2/3h、高程注记点中误差≤±h/3，h为等高距。\n（4）三维激光扫描采集的激光点云应分布均匀，按照1:1000精度执行。点云密度不小于4点/m2；地形图航空影像分辨率不低于0.1m。\n3）使用的仪器设备及专业应用软件\n使用仪器为双龙头XC-25固定翼无人机搭载AS1300HL多平台激光雷达系统进行数据采集；拓普康全站仪1台； GNSS接收机4台；内业处理软件为CoPre和TerraSolid 9.0、航天远景、浩辰CAD、南方CASS10.1、Pix4d等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n（1）在测区均匀做8个四等GNSS点，采用埋石且带标芯。每个控制点需要现场拍摄照片，静态观测时间不少于45min，采用一点一方向进行平差。每个控制点需要利用四川CORS进行不少于三次采集。（千寻采集要和四川CORS采集比较）。\n（2）在测区四周均匀布设高程模型转换，高程利用自然资源部第三大地测量队进行解算获得1985国家高程基准成果。建立测区大地高到1985国家高程基准的转换模型。选择其中一个控制点作为起算点对测区控制点进行四等三角高程联测。\n（3）根据航线布设和航摄分区布设像控点。\n（4）地形图外业采用无人机搭载激光雷达地面扫描和航空摄影采集地面数据。满足立体测图要求，尽量垂直山体飞行。\n（5）通过空三加密后恢复立体，利用立体模型采集地物，点云分类后，利用地面点生成DEM构成等高线最后将地物与等高线套合编辑，出地形图成果。\n（6）外业采用电子调绘系统进行现场调绘工作，包括地名、地类、管线、房屋结构和层数。\n（7）外业采用常规全站仪、GNSS-RTK进行检查点测量；地形图检查点应覆盖不同的航摄分区及结合处，不同的高程面，包括重要工程部位。\n（8）内业将外业检查点、调绘内容、修补测等成果进行编辑，形成正式地形图。\n注：1、点云解算前应通过外业测点检查成果质量；\n2、首件产品（点云以及地形图）应及时提交技术质量部检查。\n5）上交成果资料\n（1）四等控制、地形图\n（2）航测采集成果、数据处理成果资料。（3）测绘作业计划及计算资料测量报告等。', NULL, '按照交底以及作业计划执行，作业方法以及工作量变化时，及时与相关人员联系反馈。', NULL, '2023-10-08', NULL);
INSERT INTO `cmc_technical` VALUES ('1648881411499491350', '1648881411499491350', NULL, 55, '1）本项目执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T 35029-201428\n（2）《水电工程三维激光扫描测量规程》NB/T 35109-2018；\n（3）《低空数字航摄与数据处理规范》GB/T 39612-2020；\n（4）国家基本比例尺地图图式第1部分：1:500 1:1000 1:2000地形图图式》GB/T 20257.1-2017\n（5）《国家基本比例尺地图图式 第2部分：1：5000、1：10000地形图图式》GBT 20257.2-2017；\n（6）《测绘成果质量检查与验收》GB/T 24356-2023；\n（7）《数字测绘成果质量检查与验收》GB/T 18316-2008。\n2）主要技术指标及成果要求\n平面坐标系统：2000国家大地坐标系、牙根二级水电站工程坐标系\n高程系统：1985国家高程基准。\n（1）四等GNSS网，最弱相邻点边长相对中误差小于1/40000。四等三角高程闭合或附合差不大于20√Dmm。\n（2）1:2000、1:5000地形图分采用2.0、5.0m等高距，地形类别为山地。1:2000地物点平面位置中误差（图上）≤±0.8mm，1:5000地物点平面位置中误差（图上）≤±0.0.75mm隐蔽困难地区放宽0.5倍，但不大于图上±1.0mm；图幅等高线高程中误差≤±2h/3、高程注记点中误差≤±h/3，h为等高距。\n（3）三维激光扫描采集的激光点云应分布均匀，1:2000不小于1点/m2、1:5000不小于0.3点/m2；1:2000地形图航空影像分辨率优于0.2m，1:5000地形图航空影像分辨率优于0.5m。\n（4）收集已有控制资料和激光点云数据以及影像和地形图资料。 \n3）使用的仪器设备及专业应用软件\n使用仪器LIDAR10激光雷达系统一套，飞行平台采用D20；拓普康全站仪2台；中海达GNSS接收机4台；内业处理软件为CoPre和TerraSolid 9.0、航天远景、浩辰CAD、南方CASS等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n（1）上下库各做2个四等控制点，与牙根二级水电站已知点联测平面和高程，根据现场情况布测设像控点。\n（2）测区未收集到激光的测区采用无人机搭载激光雷达地面扫描和航空摄影采集地物数据。已有激光的区域，经检查可以用后，利用原有激光处理后生产DEM构成等高线\n（3）内业通过点云处理，生成DEM构成等高线。通过影像空三加密后，利用DOM采集地物，最后将地物与等高线套合编辑，出地形图成果。\n（4）外业采用电子调绘系统进行现场调绘工作。\n（5）外业采用常规全站仪、GNSS-RTK进行打点检查；地形图检查点应尽力在隐蔽地方以及沟心。\n（6）内业将外业调绘、修补测等成果进行编辑，形成正式地形图。\n注：1、点云解算前应通过外业测点检查成果质量；\n2、首件产品应及时提交技术质量部检查。\n5) 上交成果资料\n（1）1:2000、1:5000地形图成果以及四等控制成果 \n（2）航测采集成果、数据处理成果资料。（3）测绘作业计划及计算资料、测量报告等。', NULL, '按照交底以及作业计划执行，作业方法以及工作量变化时，及时与相关人员联系。', NULL, '2023-09-27', NULL);
INSERT INTO `cmc_technical` VALUES ('1648881411499491354', '1648881411499491354', 84, 46, '1）本项目执行的规程规范或其他技术文件\n（1）《工程测量标准》GB 50026-2020；\n（2）《机载激光雷达数据获取技术规范》CH/T 8024-2011、《机载激光雷达数据处理技术规范》CH/T 8023-2011；\n（3）《低空数字航摄与数据处理规范》GB/T 39612-2020；\n（4）《国家基本比例尺地图图式第1部分：1:500 1:1000 1:2000地形图图式》GB/T 20257.1-2017\n（5）《测绘成果质量检查与验收》GB/T 24356-2023。\n2）主要技术指标及成果要求\n平面坐标系统：2000国家大地坐标系； \n高程系统：1985国家高程基准。\n（1）地形类别为山地，地形图采用1.0m等高距。地物点平面位置中误差（图上）≤±0.8mm，隐蔽困难地区放宽0.5倍；图幅等高线高程中误差≤±h/2，h为等高距。\n（2）三维激光扫描采集的激光点云应分布均匀，1:500不小于16点/m2；1:500地形图航空影像分辨率优于5cm。\n3）使用的仪器设备及专业应用软件\n使用仪器为飞马DV-LiDAR10激光雷达模块一套，飞行平台采用飞马D20；拓普康全站仪1台；中海达GNSS接收机4台；内业处理软件为HGO和科傻、CoPre和TerraSolid 9.0、航天远景、浩辰CAD、南方CASS等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n（1）平面控制测量为布设四等GNSS，静态观测，以SCCORS数据为起算，以一点一方向方式平差计算。高程控制测量采用四等电磁波测距三角高程测量的方式，对测区控制点进行高程联测，平差获取GNSS点1985国家高程基准成果。\n（2）1:500地形图外业采用无人机搭载激光雷达地面扫描和航空摄影采集地面数据，并布设像控点。\n（3）内业通过点云处理，生成DEM构等高线。利用航空影像进行空中三角测量后制作三维模型采集地物，外业测点检查，调绘及修补测，内业进行套合编辑，完成地形图制作。\n（4）外业采用电子调绘系统进行现场调绘工作。\n（5）外业采用常规全站仪、GNSS-RTK进行检查点施测；地形图检查点应覆盖不同的航摄分区及结合处，不同的高程面，包括重要工程部位。\n（6）内业将外业调绘、修补测等成果进行编辑，形成正式地形图。\n注：1、点云解算前应通过外业测点检查成果质量；\n2、首件产品应及时提交技术质量部检查。\n5) 上交成果资料\n（1）1:500地形图、控制测量成果\n（2）航测采集成果、数据处理成果资料。（3）测绘作业计划及测量报告等。', NULL, '按技术交底要求作业。', '已组织项目参与人员进行了安全、技术交底，严格按照相关要求作业', '2023-09-06', '2023-09-06');
INSERT INTO `cmc_technical` VALUES ('1648881411499491363', '1648881411499491363', 32, 55, '      1）五等GNSS控制点平面最弱相邻点中误差不大于图上±0.05mm，高程最弱点高程不大±h/20（h为地形图基本等高距）。四等三角高程闭合或附合差不大于20√Dmm。\n      2）1:2000和1:5000地形图，地形类别为山地。等高距分部为2.0m和5.0m。地物点平面位置中误差（图上）≤±0.8mm和0.75≤±0.8mm，隐蔽困难地区放宽0.5倍，但不大于图上±1.0mm，图幅等高线高程中误差≤±2/3h、高程注记点中误差≤±h/3，h为等高距。\n     3）1:2000DOM分辨率为0.2m，地物平面中误差不大于图上0.8mm，接边限差不大于1.6m。\n     4）三维激光扫描采集的激光点云应分布均匀，整体按照1:2000精度执行。点云密度不小于0.75点/m2；地形图航空影像分辨率不低于0.2m。\n', NULL, '按照要求执行', '严格按技术交底内容作业', '2023-08-09', '2023-08-09');
INSERT INTO `cmc_technical` VALUES ('1648881411499491364', '1648881411499491364', 32, 55, '主要技术指标及成果要求\n平面坐标系统：2000国家大地坐标系； \n高程系统：1985国家高程基准。\n（1）五等GNSS控制点平面最弱相邻点中误差不大于图上±0.05mm，高程最弱点高程不大±h/20（h为地形图基本等高距）。四等三角高程闭合或附合差不大于20√Dmm。\n（2）1:5000地形图采用5.0m等高距，地形类别为山地。地物点平面位置中误差（图上）≤±0.75mm，隐蔽困难地区放宽0.5倍，但不大于图上±1.0mm；图幅等高线高程中误差≤±2h/3、高程注记点中误差≤±h/3，h为等高距。\n（3）三维激光扫描采集的激光点云应分布均匀，1:5000不小于0.3点/m2；1:5000地形图航空影像分辨率优于0.5m。\n（4）收集已有控制资料和地形图（2023C39），特别是高程转换模型进行检查验证。', NULL, '按照要求执行，实施方案有变化时，及时与技术质量部沟通', '按技术交底内容进行作业。', '2023-08-09', '2023-08-09');
INSERT INTO `cmc_technical` VALUES ('1648881411499491367', '1648881411499491367', 71, 55, '1 本项目执行的规程规范或其他技术文件\n1）《水电工程测量规范》NB/T 35029-2014\n2）《全球定位系统实时动态测量（RTK）技术规范》CH/T 2009-2010\n3）《国家基本比例尺地图图式第1部分：1:500 1:1000 1:2000地形图图式》GB/T 20257.1-2017\n4）《1:500 1:1000 1:2000 外业数字测图技术规程》GB/T 14912-2005\n5）《测绘技术设计规定》CH/T 1004-2005\n6）《测绘作业人员安全规范》CH 1016-2008\n7）《数字测绘成果质量检查与验收》GB/T 18316-2008\n8）《测绘成果质量检查与验收》GB/T 24356-2023\n2 主要技术指标及成果要求\n1）平面坐标系统：2000国家大地坐标系以及工程坐标系；高程系统：1956年黄海高程系（1985国家高程基准和甲方联系是否需要）。\n2）地形类别为高山地，基本等高距为1m。地形图上地物点平面位置允许中误差±0.8mm，等高线高程中误差±1h。\n3）五等GNSS控制点最弱相邻点中误差不大于图上±0.05mm，最弱点高程中误差不大±h/20（h为地形图基本等高距）。\n4）四等电磁波测距三角高程测量，附合路线或环线闭合差≤±20√Dmm。\n3 使用的仪器设备及专业应用软件\n中海达GNSS接收机2台；拓普康全站仪2台，内业处理软件为南方Cass10.1、COSA数据处理软件。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4 作业方法\n    1）四等三角高程联测前，需要对已知点进行校核。验证正确后起算。\n2）五等GNSS平面采用架设脚架对中整平采集不少于3次。高程和已知点采用四等三角高程联测\n3）利用人工实测完成地形图（注意沟心和沟边高程点准确性以及点间距）。\n4）采集测区周围已知点，建立2000平面和工程坐标系之间的转换关系。\n注：首件产品应及时提交技术质量部检查。\n5 上交成果资料\n1）地形图以及控制成果和外业数据采集资料。\n2）测绘作业计划及测量报告等。', NULL, '按照交底以及作业计划执行，作业方法以及工作量变化时，及时与相关人员联系，以方便仪器设备调配', '按公司安全要求进行安全生产。', '2023-07-31', '2023-11-29');
INSERT INTO `cmc_technical` VALUES ('1648881411499491369', '1648881411499491369', 61, 46, '1）本项目执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T 35029-2014；\n（2）《低空数字航摄与数据处理规范》GB/T 39612-2020；\n（3）《国家基本比例尺地图图式第1部分：1:500 1:1000 1:2000地形图图式》GB/T 20257.1-2017\n（5）《测绘成果质量检查与验收》GB/T 24356-2023；\n（4）《数字测绘成果质量检查与验收》GB/T 18316-2008。\n2）主要技术指标及成果要求\n平面坐标系统：雅砻江坐标系；2000国家大地坐标系。\n高程系统：1956年黄海高程系。\n地形类别为山地，地形图采用2.0m等高距。地物点平面位置中误差（图上）≤±0.8mm，隐蔽困难地区放宽0.5倍，但不大于图上±1.0mm；水下地形点可放宽1倍。图幅等高线高程中误差≤±2h/3、高程注记点中误差≤±h/3，h为等高距。水下地形等高线高程中误差放宽1倍。\n3）使用的仪器设备及专业应用软件\n大白II无人机、飞思IXU-RS1000相机；拓普康全站仪1台；中海达GNSS接收机4台；无人测量船2台；内业处理软件为航天远景、浩辰CAD、南方CASS等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n（1）收集已有控制成果，采集SCCORS数据，建立平面和高程转换模型。不新作控制点。\n（2）1:2000地形图采用引雅入盐项目（2023C51）航飞影像，需要布设像控点。\n（3）岸上部分地形用无人机低空航飞采集地面数据，水下部分采用无人船测量，将地物与等高线套合编辑，出地形图成果。\n（4）外业采用电子调绘系统进行现场调绘工作。\n（5）外业采用常规全站仪、GNSS-RTK进行检查点施测；地形图检查点应覆盖不同的航摄分区及结合处，不同的高程面，包括重要工程部位。\n（6）内业将外业调绘、修补测等成果进行编辑，形成正式地形图。\n5) 上交成果资料\n（1）1:2000地形图（含水下）\n（2）作业计划及测量报告等。', NULL, '按技术交底要求作业。', '已完成交底，按要求开展作业。', '2023-07-04', '2023-07-04');
INSERT INTO `cmc_technical` VALUES ('1648881411499491370', '1648881411499491370', 71, 55, '1）本项目执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T 35029-2014；\n（2）《测绘作业人员安全规范》CH 1016-2008。\n2）主要技术指标及成果要求\n（1）收集配合测区已有控制资料、文档资料、地形图，特别是平面和高程转换模型；\n（2）配合测量点、范围、图纸等需要满足图根或者与已有甲方已有资料等级一致。\n3）使用的仪器设备及专业应用软件\n拓普康全站仪1台；中海达GNSS接收机4台；内业处理软件为浩辰CAD、南方CASS、Office办公软件等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n配合成勘院现场负责人进行现场测量工作，\n5) 上交成果资料\n配合测量成果不限于点位坐标、范围、图纸等现场测绘成果资料。', NULL, '现场按照甲方需求进行配合测量、精度满足要甲方需求。', '按公司安全要求进行安全生产。', '2023-06-30', '2023-11-29');
INSERT INTO `cmc_technical` VALUES ('1648881411499491376', '1648881411499491376', 61, 46, '1）本项目执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T 35029-2014；\n（2）《水电工程三维激光扫描测量规程》NB/T 35109-2018；\n（3）《低空数字航摄与数据处理规范》GB/T 39612-2020；\n（4）《国家基本比例尺地图图式第1部分：1:500 1:1000 1:2000地形图图式》GB/T 20257.1-2017（5）《测绘成果质量检查与验收》GB/T 24356-2009；\n（5）《数字测绘成果质量检查与验收》GB/T 18316-2023。\n2）主要技术指标及成果要求\n平面坐标系统：2000国家大地坐标系、老木孔工程坐标系； \n高程系统：1985国家高程基准。\n（1）1:2000地形类别为丘陵，地形图采用1.0m等高距。地物点平面位置中误差（图上）≤±0.6mm，隐蔽困难地区放宽0.5倍，但不大于图上±1.0mm；图幅等高线高程中误差≤±h/2、高程注记点中误差≤±h/4，h为等高距。\n（2）三维激光扫描采集的激光点云应分布均匀，1:2000不小于1点/m2；1:2000地形图航空影像分辨率优于15m。（精度按照1000比例尺执行）\n（3）收集已有控制资料和地形图，特别是平面和高程转换模型。\n3）使用的仪器设备及专业应用软件\n使用仪器为AS1300激光雷达系统一套，飞行平台采用XC25；拓普康全站仪3台；中海达GNSS接收机3台；内业处理软件为CoPre和TerraSolid 9.0、航天远景、浩辰CAD、南方CASS等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n（1）1:2000地形图外业采用无人机搭载激光雷达地面扫描和航空摄影采集地面数据。需要布设像控点、采用平高飞行。\n（2）内业通过点云处理，生成DEM构等高线。地物主要用DOM采集、立体采集为辅。房子采集按照甲方任务书要求执行，其他要素采集按照规范执行。最后将地物与等高线套合编辑，出地形图成果。\n（3）外业采用电子调绘系统进行现场调绘工作。\n（4）外业采用常规全站仪、GNSS-RTK进行检查点施测；地形图检查点应覆盖不同的航摄分区及结合处，不同的高程面，包括重要工程部位。\n（5）内业将外业调绘、修补测等成果进行编辑，形成正式地形图。\n注：1、点云解算前应通过外业测点检查成果质量；\n2、首件产品应及时提交技术质量部检查。\n5) 上交成果资料\n（1）1:2000地形图\n（2）航测采集成果、数据处理成果资料。（3）测绘作业计划及测量报告等。', NULL, '按技术交底要求作业。', '已接受交底，按技术要求开展作业。', '2023-06-28', '2023-06-28');
INSERT INTO `cmc_technical` VALUES ('1648881411499491380', '1648881411499491380', 121, 55, '1）本项目执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T 35029-2014；\n（2）《国家基本比例尺地图图式第1部分：1:500 1:1000 1:2000地形图图式》GB/T 20257.1-2017；\n（3）《测绘成果质量检查与验收》GB/T 24356-2023；\n（4）《数字测绘成果质量检查与验收》GB/T 18316-2008。\n2）主要技术指标及成果要求\n（1）平面坐标系统：独立坐标系（《双江口水电站金川县双柏树居民点外部道路和引水线路地形地类图测绘》控制成果）、以及2000国家大地坐标系。\n（2）高程系统：1956年黄海高程系。\n（3）1:500地形图采用1.0m等高距，地形类别为山地。地物点平面位置中误差（图上）≤±0.8mm，隐蔽困难地区放宽0.5倍，但不大于图上±1.0mm；图幅等高线高程中误差≤±2h/3、高程注记点中误差≤±h/3，h为等高距。\n3）使用的仪器设备及专业应用软件\n使用仪器为拓普康全站仪1台；中海达GNSS接收机1台、浩辰CAD、南方CASS。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法\n（1）测区控制利用《双江口水电站金川县双柏树居民点外部道路和引水线路地形地类图测绘》控制成果引测到测区\n（2）采用人工实测，注意地类和坎子，地形变换地方需要加测地形点。\n（3）内业利用外业提供地形图初稿进行数字化编辑，形成正式地形图。\n5）上交成果资料\n（1）1:500地形图成果\n（2）数据采集、处理成果资料。（3）测绘作业计划及测量报告等。', NULL, '按照交底以及作业计划执行，作业方法以及工作量变化时，及时与相关人员联系反馈', '按上述交底内容实施。', '2023-05-30', '2023-06-01');
INSERT INTO `cmc_technical` VALUES ('1648881411499491381', '1648881411499491381', 61, 46, '1）本项目执行的规程规范或其他技术文件\n（1）《水电工程测量规范》NB/T 35029-2014；《水利水电工程测量规范》（SL197－2013）。\n（2）《全球定位系统实时动态测量（RTK）技术规范》（CH/T 2009-2010）。\n（3）《测绘成果质量检查与验收》GB/T 24356-2009；《数字测绘成果质量检查与验收》GB/T 18316-2008。\n2）主要技术指标及成果要求\n（1）测量基准\n平面坐标系统：2000国家大地坐标系； \n高程系统：1985国家高程基准。\n（2）界桩布设、制作尺寸、埋设标准按规范和用户要求执行。\n（3）界桩测量精度为平面中误差不大于±0.1m，高程中误差不大于±0.3m。\n3）使用的仪器设备及专业应用软件\n使用仪器为全站仪2台； GNSS接收机4台；内业处理软件为浩辰CAD、南方CASS等。所用仪器在投入工程前均由测绘管理部门检定合格，并在检定有效期内。\n4）作业方法 \n（1）界桩布置设计由技术质量部完成。\n（2）界桩土建按设计和规范执行。\n（3）界桩放样按设计坐标进行，收测需满足精度要求。\n（4）外业依照地形地类标准调绘。\n（5）红线图根据设计和实地测设界桩成果展绘。\n5）上交成果资料\n（1）界桩成果。\n（2）红线图。（3）测绘作业计划及测量报告等。', NULL, '实施按交底要求执行。', '已接受技术交底，按交底要求开展工作。', '2023-07-17', '2023-07-27');
INSERT INTO `cmc_technical` VALUES ('1648881411499491382', '1648881411499491382', 71, 49, NULL, NULL, NULL, '按技术要求进行作业', '2024-06-20', '2024-06-20');

-- ----------------------------
-- 50、cmc借款申请表
-- ----------------------------
drop table if exists `cmc_borrow`;
create table `cmc_borrow`  (
  `borrow_id` 		char(19)		not null 	comment '借款申请id',
  `project_id` 		char(19)  		default null comment '项目id',
  `borrow_usage` 	char(1)  		default null comment '借款用途',
  `apply_reason` 	varchar(255)  	default null comment '借款事由',
  `applier` 		bigint 			default null comment '借款人',
  `apply_dept`		bigint			default null comment '申请部门',
  `remark` 			text  			default null comment '申请人说明',
  `borrow_document` varchar(255)  	default null comment '借款附件',
  `apply_date` 		date 			default null comment '借款日期',
  `apply_amount` 	decimal(10, 2) 	default null comment '申请金额',
  `manager_amount` 	decimal(10, 2) 	default null comment '核准金额',
  `dept_comment` 	varchar(255)  	default null comment '部门意见',
  `dept_user_id` 	bigint 			default null comment '部门审批人',
  `manager_comment` varchar(255)  	default null comment '分管审批意见',
  `manager_user_id` bigint 			default null comment '分管审批人',
  `zjl_user_id` 	bigint 			default null comment '总经理审批人',
  `zjl_comment` 	varchar(255)  	default null comment '总经理审批意见',
  `dsz_user_id` 	bigint 			default null comment '董事长审批人',
  `dsz_comment` 	varchar(255)  	default null comment '董事长审批意见',
  `union_user_id` 	bigint 			default null comment '工会审批人',
  `union_comment` 	varchar(255)  	default null comment '工会审批意见',
  `cw_user_id` 		bigint 			default null comment '财务部经办人',
  `cw_comment` 		varchar(255)  	default null comment '财务部支付备注',
  `lend_document` 	varchar(255)  	default null comment '支付凭证',
  `dept_time` 		date 			default null comment '部门审批时间',
  `manager_time` 	date 			default null comment '分管审批时间',
  `zjl_time` 		date 			default null comment '总经理审批时间',
  `dsz_time` 		date 			default null comment '董事长审批时间',
  `union_time` 		date 			default null comment '工会审批时间',
  `lend_time` 		date 			default null comment '借款支付时间',
  primary key (`borrow_id`)
) engine = innodb comment = 'cmc借款申请表';

-- ----------------------------
-- 初始化-借款申请表数据
-- ----------------------------
INSERT INTO `cmc_borrow` VALUES ('1648881418852100001', '1648881418852106241', '0', NULL, 83, 111, NULL, NULL, '2020-04-19', 40000.00, 40000.00, '借款明细由现场负责人程昊申报，情况属实，同意借款。', 83, '本项目之前已借支3万元。项目现场人员多（含路桥专业）、时间长（预计五一节后，在现场工作20天），同意借支。', 10, 2, NULL, NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-04-19', '2020-04-20', '2020-04-20', NULL, NULL, '2020-04-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418852110002', '1648881420227837954', '0', NULL, 59, 111, '三调两项目暂未按比例结算，目前已产生成本超5万元，均是自己垫付。为了维持后续项目开展，特申请借款6万元。', NULL, '2020-05-06', 60000.00, 60000.00, '已核，情况属实。', 13, NULL, 7, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-06', '2020-05-09', '2020-05-15', NULL, NULL, '2020-05-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852120003', NULL, '1', '邻水宅基地项目外协垫付费用', 59, NULL, '1、到档案室拍照产生的费用，二包共计10万户，每户4角；应为外协支付，公司暂垫付。\n2、赵强贤上月拖欠工资，无力支付，申请公司暂为垫付。', NULL, '2020-05-25', 60400.00, 60400.00, '根据2020年5月25日内部组织召开的邻水县农村集体土地大比例尺图实测和确权登记发证项目沟通会会议要求，同意该2项费用先行垫付，金额为60400.00元。', 13, '同意', 7, 2, '同意垫付，避免同类事情再次发生。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-26', '2020-05-26', '2020-06-01', NULL, NULL, '2020-06-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418852130004', '1648881420903120898', '0', NULL, 61, 111, '1、按目前项目情况，预计工期还需要15天左右；\n2、番禺项目增加工作量涉及人员进出场及现场成本，先走本项目借款；\n3、借款为预算，且不包括人员离场成本。', NULL, '2020-06-07', 14600.00, 14600.00, NULL, 61, '本项目本年度前5次共借支86500元。同意借款。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-07', '2020-06-08', '2020-06-10', NULL, NULL, '2020-06-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418852140005', '1648881418483007490', '0', NULL, NULL, 107, NULL, NULL, '2020-06-08', 80000.00, 70000.00, NULL, NULL, '同意借款', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-08', '2020-06-08', '2020-06-10', NULL, NULL, '2020-06-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418852150006', '1648881419548360705', '0', NULL, 83, 111, '该整改项目第二组（陈敏、张书伟、凌涛）已于6月6日进场。\n交通成本为：杨振乘客车至现场产生的费用；由于雅砻江23段涉及锦屏二级厂房专用公路，需租赁当地有通行证的车辆一天。', NULL, '2020-06-08', 10000.00, 10000.00, '情况属实，同意借款。', 83, '同意借款。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-08', '2020-06-08', '2020-06-10', NULL, NULL, '2020-06-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418852160007', NULL, '1', '雅安市名山区水利局河流河道管理范围划界项目', 23, 105, NULL, NULL, '2020-06-09', 50000.00, 50000.00, '同意', 15, NULL, 7, 2, '同意借用。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-09', '2020-06-09', '2020-06-09', NULL, NULL, '2020-06-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418852170008', NULL, '1', '乡村规划 乡镇界线勘定  河湖划界 沉降观测', 21, 105, '乡村规划 乡镇界线勘定  河湖划界 沉降观测', NULL, '2020-06-09', 10000.00, 10000.00, '同意', 15, NULL, 7, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-09', '2020-06-11', '2020-06-12', NULL, NULL, '2020-06-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418852180009', NULL, '1', '银行贷款担保费', 29, 106, '800万贷款的担保费用年费2%，今年打九折，担保费=8000000*2%*0.9=144000\n担保费账户：成都中小企业融资担保有限责任公司\n账号：3002 2010 2186 1150 0012\n开户行：成都银行体育场路支行', NULL, '2020-06-10', 144000.00, 144000.00, '同意借款', 14, '同意借款。刘非代签。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-10', '2020-06-10', '2020-06-10', NULL, NULL, '2020-06-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418852190010', NULL, '1', '值班车辆燃油费', 16, 200, NULL, NULL, '2020-06-10', 20000.00, 20000.00, NULL, 142, '同意。', 2, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-15', '2020-06-18', '2020-06-18', NULL, NULL, '2020-06-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852200011', NULL, '1', '南江县不动产权籍调查', 14, 106, '担保合同金额1617705，担保费用为一年1.8%，1617705*0.018=29118.69', NULL, '2020-06-12', 29118.69, 29118.69, NULL, 14, '项目实施过程成本，同意借款。', 2, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-12', '2020-06-12', '2020-06-12', NULL, NULL, '2020-06-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418852210012', NULL, '1', '购泰康人寿保险公司人身意外伤害险', 8, 104, NULL, NULL, '2020-06-12', 2750.40, 2750.40, NULL, 142, '同意', 2, 2, '可以支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-15', '2020-06-17', '2020-06-17', NULL, NULL, '2020-06-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852220013', '1648881418558504961', '0', NULL, NULL, 111, NULL, NULL, '2020-06-14', 12000.00, 12000.00, NULL, 61, '同意借款', 10, 2, '可以支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-14', '2020-06-16', '2020-06-17', NULL, NULL, '2020-06-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852230014', NULL, '1', '剑阁房地一体四标段', 15, 105, NULL, NULL, '2020-06-15', 49043.00, 49043.00, '同意', 15, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-15', '2020-06-18', '2020-06-18', NULL, NULL, '2020-06-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852240015', NULL, '1', '阳山房地一体', 15, 105, NULL, NULL, '2020-06-15', 29690.00, 29690.00, '同意', 15, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-15', '2020-06-15', '2020-06-15', NULL, NULL, '2020-06-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418852250016', '1648881418994712578', '0', NULL, 102, 112, '3月份项目生产费用，金龙山为季度观测费，本次借款不含人员生活及日常办公开支。', NULL, '2020-03-13', 48720.00, 48720.00, '同意', 101, '同意借款', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-13', '2020-03-27', '2020-03-31', NULL, NULL, '2020-04-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418852260017', NULL, '1', NULL, 13, NULL, '向河南遥绘星维信息技术有限公司购买西藏西巴霞曲项目遥感影像、DEM数据，面积约2000km2.', NULL, '2020-02-13', 90000.00, 0.00, '同意。', 13, '同意。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-02-13', '2020-02-13', '2020-02-13', NULL, NULL, '2020-02-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418852270018', '1648881420718571521', '0', NULL, 61, 111, '    本次工期按15天计算，其中9000元是去年项目开展已经发生的垫资金额。\n    住宿120元/间.天；餐饮按60元/人.天。', NULL, '2020-03-06', 18000.00, 18000.00, '已核实，预算合理。', 61, '同意', 10, 2, '同意借支。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-06', '2020-03-06', '2020-03-06', NULL, NULL, '2020-03-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418852280019', '1648881418835329026', '0', NULL, 61, 111, '由于项目变更，需延长工作时间，追加借款。', NULL, '2020-03-06', 3000.00, 3000.00, NULL, 61, ' 同意', 10, 2, '同意借支。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-06', '2020-03-09', '2020-03-09', NULL, NULL, '2020-03-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418852290020', '1648881420903120898', '0', NULL, 61, 111, '结合前期成本及现场情况，按预计工天30天预算', NULL, '2020-03-16', 19000.00, 19000.00, NULL, 61, '同意。\n项目工作量增加，增补借款。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-16', '2020-03-16', '2020-03-20', NULL, NULL, '2020-03-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418852300021', NULL, '1', '值班车辆加油费及保险费和购买驾驶员墨镜费用', 16, 200, '购买驾驶员防紫外线墨镜、值班车辆油费和保险费用。', NULL, '2020-03-19', 20000.00, 20000.00, '同意.', 142, '同意。', 2, 2, '适时办理。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-19', '2020-03-20', '2020-03-20', NULL, NULL, '2020-03-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418852310022', '1648881418810163201', '0', NULL, 101, 112, '本借款为猴子岩项目2020一季度的现场作业成本，外包劳务包含当地辅助民工费用、春节期间临时租车费用等。', NULL, '2020-03-04', 30000.00, 30000.00, NULL, 101, '以后借款，请细化预算。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-04', '2020-03-05', '2020-03-05', NULL, NULL, '2020-03-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418852320023', NULL, '1', '大庆石油管理局职工家属区分离移交物业、供热系统维修改造工程测绘现状地形图购买控制点', 15, 105, '大庆石油管理局职工家属区分离移交物业、供热系统维修改造工程测绘现状地形图项目购买控制点，委外单位支付这笔借款。\n账户名：自然资源部第二大地测量队\n开户行：中国农业银行哈尔滨测绘支行\n账号：08080801040000113', NULL, '2020-03-19', 4000.00, 4000.00, '同意', 15, '同意', 7, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-19', '2020-03-19', '2020-03-20', NULL, NULL, '2020-03-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418852330024', NULL, '1', '购买招标文件', 23, 105, '购买招标文件：高铁工务段101    西成客专剑门关至江油城际场CPIII复测项目', NULL, '2020-04-02', 100.00, 100.00, '同意', 15, '同意', 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-04-02', '2020-04-02', '2020-04-03', NULL, NULL, '2020-04-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418852340025', '1648881419607080962', '0', NULL, 113, NULL, '本次借款预计3个月，其中租车为每个月估计租车费用为4000元整，油耗补助费用为0.7元每公里加上过路费预计为每月7000元；用餐成本为目前项目部四人吃饭，预计为每人每天40元,；项目部租房6月到期，就目前工作进度需要继续租用项目部；项目部所用水电气和其他商务费用（村社）', NULL, '2020-04-03', 50000.00, 40000.00, '同意按4万预支。', 13, '同意借款', 10, 2, '同意按照核准金额借支。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-04-03', '2020-04-03', '2020-04-06', NULL, NULL, '2020-04-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418852350026', NULL, '1', '商业保险转账借款', 8, 104, '新增人员（刘洋）购买人身意外商业保险', NULL, '2020-04-08', 867.00, 867.00, '同意借款。', 142, '同意', 2, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-04-08', '2020-04-08', '2020-04-08', NULL, NULL, '2020-04-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418852360027', NULL, '1', '测绘通报协办费用', 9, 102, NULL, NULL, '2020-04-01', 40000.00, 40000.00, NULL, 46, NULL, 9, 2, NULL, NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-04-02', '2020-04-02', '2020-04-03', NULL, NULL, '2020-04-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418852370028', '1648881418835329026', '0', NULL, 61, 111, '项目食宿在泸定县城，工期按4天计算。', NULL, '2020-03-04', 3000.00, 3000.00, '预算合理', 61, '同意。', 10, 2, '同意借支', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-04', '2020-03-04', '2020-03-04', NULL, NULL, '2020-03-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418852380029', '1648881418273292290', '0', NULL, NULL, 107, NULL, NULL, '2020-10-14', 10000.00, 10000.00, NULL, NULL, '建议同意借支', 10, 2, '可以支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-14', '2020-10-14', '2020-10-14', NULL, NULL, '2020-10-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418852390030', '1648881418776608769', '0', NULL, 83, 111, NULL, NULL, '2020-03-06', 5000.00, 5000.00, NULL, 83, '同意', 10, 2, '同意借支。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-06', '2020-03-06', '2020-03-08', NULL, NULL, '2020-03-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418852400031', '1648881418747248642', '0', NULL, 61, 111, '工作及进出场按3天计算，三个人一台车。', NULL, '2020-03-12', 1500.00, 1500.00, '预算合理', 61, '同意', 10, 2, '同意借用。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-12', '2020-03-12', '2020-03-15', NULL, NULL, '2020-03-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852410032', '1648881418910826498', '0', NULL, 83, 111, '该借款为现场工作一个月的开支预算，根据项目实际情况后期再申请借款。', NULL, '2020-03-16', 126800.00, 100000.00, '情况属实，同意借款。', 83, '核准借支10万元，按实际开销进度拨付。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-16', '2020-03-16', '2020-03-20', NULL, NULL, '2020-03-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418852420033', '1648881418864689154', '0', NULL, 61, 111, '食宿按150元/人.天计算，先预算150人.天，后期根据需要再申请借款；\n界桩制作及运输，先借20000，后期根据需要再申请借款；\n民工费用先借10000，后期根据需要再申请借款；\n青苗费先借7500，后期根据需要再申请借款。', NULL, '2020-03-19', 60000.00, 50000.00, '此预算为前期费用，后期根据实际情况如实借支。', 61, '同意借支', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-19', '2020-03-20', '2020-03-20', NULL, NULL, '2020-03-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418852430034', '1648881421003784193', '0', NULL, NULL, 107, NULL, NULL, '2019-12-02', 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418852440035', '1648881418881466369', '0', NULL, 21, 105, '测量人员住宿、吃饭、车油费过路费', NULL, '2020-03-03', 60000.00, 60000.00, '同意', 15, '同意。后续借款请分项预算。', 10, 2, '可以支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-03', '2020-03-03', '2020-03-04', NULL, NULL, '2020-03-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418852450036', '1648881418881466369', '0', NULL, 21, 105, '向邻水县水务局交通局国土局收集水文资料。包括 防洪规划报告、采砂规划报告、河道综合整治工程报告、防洪堤整治工程报告、各水电站设计报告、各水电站行洪论证、各水电站工矿征地图、水资源综合规划报告、水利发展规划、3条大河的划定报告、公路桥梁占地图等。', NULL, '2020-03-09', 80000.00, 80000.00, '同意', 15, '水文资料购买专项借款。', 10, 2, '同意借支，索要发票冲账。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-09', '2020-03-10', '2020-03-11', NULL, NULL, '2020-03-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418852460037', '1648881418852106241', '0', NULL, 83, 111, NULL, NULL, '2020-03-16', 100000.00, 30000.00, '该项目需负责成都院相关人员的食宿，情况属实，同意借款。', 83, '核准借支30000元。根据项目开支情况，如有需要再另行借款。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-16', '2020-03-16', '2020-03-20', NULL, NULL, '2020-03-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418852470038', '1648881418696916993', '0', NULL, 61, 111, '1、双江航电两个项目一起工期按7天计算；\n2、住宿按120元/间就计算；\n3、餐饮按75元/人.天计算；', NULL, '2020-03-27', 6000.00, 6000.00, '预算合理', 61, '同意借款', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-27', '2020-03-30', '2020-03-31', NULL, NULL, '2020-04-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418852480039', NULL, '1', NULL, 22, 105, '深溪沟消力池及泄洪洞进出口水下检测及检查项目（挂靠项目，已中标）代理服务费。', NULL, '2020-02-19', 21925.40, NULL, '同意', 15, '同意', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-02-19', '2020-02-20', '2020-02-20', NULL, NULL, '2020-02-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418852490040', '1648881418994712578', '0', NULL, 102, 112, NULL, NULL, '2020-02-22', 50000.00, NULL, '同意，项目正常所需开支。', 101, '同意，下次预算请再细化，并不含餐饮费。', 10, 2, '同意借支。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-02-23', '2020-02-24', '2020-02-24', NULL, NULL, '2020-02-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418852500041', '1648881420903120898', '0', NULL, 61, 111, '为惠州金山新天地水环境综合治理项目地形图补测借款，用于现场开支。工期按20天机算，人员按2人计。', NULL, '2020-03-04', 16000.00, 12000.00, '预算合理', 61, '同意', 10, 2, '同意借支。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-04', '2020-03-04', '2020-03-04', NULL, NULL, '2020-03-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418852510042', '1648881418776608769', '0', NULL, 144, 111, NULL, NULL, '2020-03-06', 5000.00, 0.00, '情况属实，同意借款。', 83, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2020-03-06', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418852520043', '1648881418764025857', '0', NULL, 83, 111, '其它成本：因部分像控点位置植被茂密，考虑请当地老乡帮忙砍树。', NULL, '2020-03-09', 22000.00, 22000.00, '情况属实，同意借款。', 83, '同意。', 10, 2, '同意借用。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-09', '2020-03-10', '2020-03-15', NULL, NULL, '2020-03-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852530044', '1648881418881466369', '0', NULL, 21, 105, '项目开支', NULL, '2020-03-10', 127000.00, 127000.00, '同意', 15, '同意', 7, 2, '同意借用。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-03-11', '2020-03-11', '2020-03-11', NULL, NULL, '2020-03-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418852540045', '1648881420903120898', '0', NULL, 61, 111, '现场增加工作量，需要增加费用。申请费用按现场实际情况借款，借款周期20天。', NULL, '2020-04-13', 18000.00, 18000.00, NULL, 61, '2020年3月至今，惠州已新增1:500地形图测绘面积共计约10平方公里。部分实测、部分委外航飞建模、三维测图、外业调绘补测。前两次已借支3.1万元。同意借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-04-13', '2020-04-13', '2020-04-14', NULL, NULL, '2020-04-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418852550046', NULL, '1', '喜德房地一体', 15, 105, '业务费', NULL, '2020-04-24', 50000.00, 500000.00, '同意', 15, '同意', 7, 2, '同意借用。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-04-24', '2020-04-24', '2020-04-24', NULL, NULL, '2020-04-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418852560047', '1648881418881466369', '0', NULL, 21, 105, '用工成本用于现场人员吃住行。租车。其他成本项目第一笔收款及其验收', NULL, '2020-04-26', 60000.00, 60000.00, '同意', 15, '同意', 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-04-26', '2020-04-27', '2020-04-27', NULL, NULL, '2020-04-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418852570048', '1648881420903120898', '0', NULL, 61, 111, '费用预算包括后续人员进场，因现场增加工作量，按照25天计算。', NULL, '2020-04-29', 22500.00, 22500.00, '根据工作内容和工期增加将继续增补费用。', 61, '2020年实际工作量由0.2平方逐步增加到14平方公里。之前已借支4.9万元整。同意借款。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-04-29', '2020-04-30', '2020-04-30', NULL, NULL, '2020-05-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418852580049', '1648881418864689154', '0', NULL, NULL, 111, '所借款项包含界桩制作费用、民工费用、清苗费、公司员工工地吃住、租车、代开发票等所有费用。', NULL, '2020-05-01', 50000.00, 50000.00, NULL, 61, '本项目前期已借支6万元，预算开支约13.6万元，同意本次借款。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-05', '2020-05-06', '2020-05-07', NULL, NULL, '2020-05-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418852590050', '1648881418910826498', '0', NULL, 83, 111, '全部外业工作预计于2020年5月15日左右完成，根据现场实际情况申请借款。', NULL, '2020-05-04', 60000.00, 50000.00, NULL, 83, '此项目外业已借支10万元。按现场工作情况，同意再借支5万元。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-04', '2020-05-06', '2020-05-07', NULL, NULL, '2020-05-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418852600051', '1648881420718571521', '0', NULL, 61, 111, '按照4个作业员、1个驾驶员、1辆汽车，工作12天计划预算。住宿费100元/间.天，吃饭60元/人.天。', NULL, '2020-05-06', 16200.00, 16200.00, '工期及成本均按现场以发生的情况预算，后期根据实际情况增补借款。', 61, '遂宁项目今年3月借支18000元。根据工作量增加情况，同意借款。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-06', '2020-05-13', '2020-05-15', NULL, NULL, '2020-05-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852610052', NULL, '1', '值班车辆加油费.车辆保险费等', 16, 200, NULL, NULL, '2020-05-09', 20000.00, 20000.00, '同意.', 142, '同意。', 2, 2, '须专款专用，同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-12', '2020-05-15', '2020-05-15', NULL, NULL, '2020-05-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852620053', '1648881418810163201', '1', '猴子岩水电站2020年一季度结算税金缴纳（与甲方）', 101, 112, '猴子岩水电站2020年一季度（含2019年四季度部分产值）结算产值1680502.37元，需在地方税务局缴纳5%税金（含一般纳税人增值税、企业法人个人所得税、地方教育、食品等多项附加税）', NULL, '2020-05-13', 84000.00, 84000.00, NULL, 101, '同意借款', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-13', '2020-05-13', '2020-05-15', NULL, NULL, '2020-05-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852630054', '1648881421402243074', '0', NULL, 61, 111, '采取现场租车的形式，预计工期20天。', NULL, '2020-05-13', 56800.00, 39000.00, NULL, 61, '同意借款', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-13', '2020-05-14', '2020-05-15', NULL, NULL, '2020-05-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852640055', NULL, '1', '2020年第2期不动产测绘培训及不动产测绘员职业技能鉴定', 46, 111, NULL, NULL, '2020-05-19', 12500.00, NULL, NULL, 46, NULL, 9, 2, '同意借用。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-19', '2020-05-19', '2020-05-22', NULL, NULL, '2020-05-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418852650056', '1648881420903120898', '0', NULL, 61, 111, '黄文峰预支津贴', NULL, '2020-05-22', 15000.00, 15000.00, '同意特殊情况预支', 61, '同意借支', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-22', '2020-05-22', '2020-05-28', NULL, NULL, '2020-05-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418852660057', '1648881420211060738', '0', NULL, 143, 110, NULL, NULL, '2020-10-14', 10000.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418852670058', NULL, '1', '邻水宅基地项目现场开支', 59, NULL, '1、临时工工资预算\n3、加油费预算\n5、赵强贤额外垫付款3500+6000\n7、临时工保险预算\n8、现场其他开支', NULL, '2020-05-25', 42500.00, 40000.00, '已核，根据2020年5月25日内部组织召开的邻水县农村集体土地大比例尺图实测和确权登记发证项目沟通会会议要求，同意公司主导第1个月的8项开支出项，暂按40000.00元借支。请领导批示。', 13, '同意', 7, 2, '同意借支，尽快对后期工作内容、时间、费用做好统筹安排和预算，实现预算管理模式。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-26', '2020-05-26', '2020-05-28', NULL, NULL, '2020-05-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418852680059', '1648881419548360705', '0', NULL, 83, 111, '河湖划界现场整改费用。', NULL, '2020-05-29', 20000.00, 20000.00, NULL, 83, '同意。', 10, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-29', '2020-05-29', '2020-06-01', NULL, NULL, '2020-06-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418852690060', NULL, '1', '商标复审费用前期支付费', 142, 104, NULL, NULL, '2020-05-29', 2750.00, 2750.00, NULL, 142, '同意', 2, 2, '同意借用。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-29', '2020-05-29', '2020-05-29', NULL, NULL, '2020-05-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418852700061', '1648881418864689154', '0', NULL, NULL, 111, '界桩埋设民工费用，水位牌制作费用', NULL, '2020-04-12', 60000.00, 60000.00, '预算满足阶段生产需要', 61, '之前已借支5万元，本次续借6万元。总计借支金额在预算界桩、界牌制作运输、埋设民工费用之内。同意借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-04-11', '2020-04-13', '2020-04-14', NULL, NULL, '2020-04-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418852710062', '1648881418810163201', '0', NULL, 101, 112, '本费用为二季度项目正常开支成本。', NULL, '2020-04-21', 35000.00, 30000.00, NULL, 101, '一季度已借支2万元。本次为二季度借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-04-21', '2020-04-24', '2020-04-25', NULL, NULL, '2020-04-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418852720063', '1648881418994712578', '0', NULL, 102, 112, '二滩项目部4月份工地开支费用。', NULL, '2020-04-24', 30000.00, 28000.00, '同意。', 101, '同意借款。本项目前三月已借支98720元。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-04-24', '2020-04-26', '2020-04-30', NULL, NULL, '2020-05-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418852730064', '1648881418642391041', '0', NULL, NULL, 107, NULL, NULL, '2020-05-06', 10000.00, 10000.00, NULL, NULL, '孟获城、绰斯甲地形图补测两项目一共借款1万元。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-06', '2020-05-07', '2020-05-09', NULL, NULL, '2020-05-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852740065', '1648881418608836610', '0', NULL, NULL, 111, NULL, NULL, '2020-05-06', 7000.00, 7000.00, NULL, 61, '同意借支', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-06', '2020-05-07', '2020-08-05', NULL, NULL, '2020-08-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418852750066', NULL, '1', '邻水县宅基地项目现场开支（此项目不在OA项目清单，所以只能暂走“非项目费用”）', 59, NULL, '邻水宅基地项目自4月20日开展至今产生了部分成本，主要是交通和住宿约5000元。目前项目预算还未完善，但项目开展在即，望先借款2万元便于应对前期各项工作开支。', NULL, '2020-05-08', 20000.00, 20000.00, '同意。', 13, NULL, 7, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-08', '2020-05-09', '2020-05-15', NULL, NULL, '2020-05-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852760067', NULL, '1', '日常采购', 142, 104, '用于公司日常采购开支。', NULL, '2020-05-14', 30000.00, 30000.00, NULL, 142, '同意。', 2, 2, '同意借用。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-14', '2020-05-15', '2020-05-15', NULL, NULL, '2020-05-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852770068', '1648881418558504961', '0', NULL, 13, NULL, '南涧至云县高速公路控制地形测绘无人机数据采集委外费用。', NULL, '2020-05-15', 30000.00, 30000.00, '已核。', 13, '同意', 10, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-15', '2020-05-15', '2020-05-16', NULL, NULL, '2020-05-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852780069', '1648881418558504961', '0', NULL, NULL, 111, NULL, NULL, '2020-05-18', 27150.00, 27150.00, '同意借款', 61, '同意借款。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-18', '2020-05-18', '2020-05-19', NULL, NULL, '2020-05-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418852790070', '1648881418524950530', '0', NULL, 39, 108, NULL, NULL, '2020-05-28', 40000.00, 40000.00, '同意', 39, '同意借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-28', '2020-05-28', '2020-05-28', NULL, NULL, '2020-05-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418852800071', '1648881419254759426', '0', NULL, NULL, 111, NULL, NULL, '2019-12-23', 16000.00, 12000.00, '以产生费用借款', 61, '2020年1月开展的外业工作，项目之前未借支。同意借款。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-04-09', '2020-04-20', '2020-05-19', NULL, NULL, '2020-05-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418852810072', NULL, '1', '四川省成都市青白江区规划和自然资源局成都市青白江区拆迁和空闲地块监管技术外包服务采购项目代理服务费', 22, 105, '我公司已中标本项目，中标金额为651700元，现申请支付本项目的代理服务费，代理公司的银行信息如下：\n代理机构收费标准：\n1、收取标准：按实际预算金额计算，参照“发改办价格[2003]857号”要求和“计价格[2002]1980号”文件收取。 \n2、收取方式：中标供应商在领取中标通知书前向招标代理机构一次性支付。 \n3、收款单位：四川惠创地招标代理有限公司；\n开户行：成都银行股份有限公司南城支行；\n银行账号：1001300000710451\n代理机构收费金额：9000元', NULL, '2020-10-20', 9000.00, 9000.00, '同意', 15, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-20', '2020-10-20', '2020-10-22', NULL, NULL, '2020-10-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418852820073', NULL, '1', '2020年三体系外审费用', 9, 102, NULL, NULL, '2020-06-16', 18000.00, 18000.00, NULL, NULL, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, NULL, '2020-06-18', '2020-06-18', NULL, NULL, '2020-06-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852830074', NULL, '1', '会理房地一体', 15, 105, NULL, NULL, '2020-06-18', 67840.00, 67840.00, '同意', 15, NULL, 7, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-18', '2020-06-18', '2020-06-18', NULL, NULL, '2020-06-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418852840075', NULL, '1', '蜀南气矿土地测绘服务采购项目', 15, 105, NULL, NULL, '2020-06-22', 500.00, 500.00, '同意', 15, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-22', '2020-06-22', '2020-06-22', NULL, NULL, '2020-06-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418852850076', '1648881421402243074', '0', NULL, 61, 111, '本次借款为项目增补借款', NULL, '2020-07-01', 10970.00, 10970.00, NULL, 61, '本次借款为项目界桩预支、运输及埋设、地形图补充调绘。项目外业结束。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-07-01', '2020-07-03', '2020-07-07', NULL, NULL, '2020-07-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418852860077', '1648881418881466369', '0', NULL, 21, 105, '水文计算费用 第二次', NULL, '2020-07-06', 40000.00, 40000.00, '同意', 15, '本项目水文资料及水文分析计算预算费用32万元。水文专项借款前期已借支12万元，项目总借款367000元。建议同意本次借支。', 10, 2, '同意本周内全额支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-07-07', '2020-07-08', '2020-07-09', NULL, NULL, '2020-07-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418852870078', '1648881420211060738', '0', NULL, 61, 111, '1、现场两人，含司机；\n2、预计工天10天；\n3、已发生费用为前期现场已开资成本。', NULL, '2020-07-13', 27000.00, 27000.00, '建议借款', 61, '建议同意借支。本项目进入界桩界牌制作埋设阶段。后续还有4条河流须借支。', 10, 2, '同意借款，合理安排。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-07-13', '2020-07-15', '2020-07-15', NULL, NULL, '2020-07-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418852880079', '1648881419607080962', '0', NULL, 113, NULL, '南江项目预计能总借款403568元整，已借款143000元整，还剩余260568元。本次借款费用为两个月，其中用餐成本为14000元，目前项目部为5人，每人每天为40元，共计12000元；租车费用每个月4500元固定费用，油耗补助为每公里0.7元，按照之前每个月2500公里，过路费平均30，预计20天，验收另外临时租车400元每天，预计10天，共计17700元；耗材成本为之前异地搬迁农户资料打印，纸张和打印硒鼓，包括本月开始的公示资料仍需要买纸和其他耗材，预计4000元，现场招聘两名人员，集中开展内外业检查工作，其工资为100元每天，预计50天，共计10000元；审查成本，验收红包5000元，每次外业检查招待1000元，包括验收完成招待2000元，业主组织专家评审，活动费用预计20000元，共计,32000元。其他成本为项目部水电气网络预计1000元。商务成本，表示费用预估为50000元整。', NULL, '2020-07-13', 128700.00, 128700.00, '同意，请申请人再次上报前期已花销+后续预计开支费用报部门及公司审核确定该项目总体费控目标，严格按审批后的预算开支。', 13, '同意', 7, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-07-20', '2020-07-21', '2020-08-03', NULL, NULL, '2020-08-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418852890080', '1648881418483007490', '0', NULL, NULL, 107, NULL, NULL, '2020-07-21', 120000.00, 120000.00, '同意', NULL, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-07-21', '2020-07-21', '2020-07-21', NULL, NULL, '2020-07-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418852900081', NULL, '1', '值班车辆燃油费', 16, 200, NULL, NULL, '2020-08-04', 20000.00, 20000.00, '同意。', 142, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-04', '2020-08-17', '2020-08-17', NULL, NULL, '2020-08-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418852910082', '1648881421402243074', '0', NULL, 61, 111, '县水利局组织专家对本项目进行验收，预计3天', NULL, '2020-08-23', 10000.00, 10000.00, NULL, 61, '建议同意借支', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-23', '2020-08-24', '2020-08-24', NULL, NULL, '2020-08-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418852920083', NULL, '1', '新疆哈密抽水蓄能电站三维扫描测量技术服务', 11, 102, NULL, NULL, '2020-09-08', 80000.00, 80000.00, NULL, NULL, NULL, 11, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, NULL, '2020-09-08', '2020-09-10', NULL, NULL, '2020-09-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418852930084', NULL, '1', '测绘技术交流会会务费及日常采购费用', 142, 104, NULL, NULL, '2020-09-10', 80000.00, 80000.00, NULL, 142, '同意', 2, 2, '可以支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-10', '2020-09-10', '2020-09-10', NULL, NULL, '2020-09-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418852940085', NULL, '1', '光纤费用', 148, 104, '转账。转账信息---收款人：中国移动通信集团四川有限公司成都分公司；账号：4402209009005411951；开户行：中国工商银行春熙路支行。', NULL, '2020-09-14', 1800.00, 1800.00, '同意。', 142, '同意', 2, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-14', '2020-09-15', '2020-09-15', NULL, NULL, '2020-09-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418852950086', NULL, '1', '邻水宅基地项目现场开支（8月25-9月30）', 59, NULL, '1、每月人均1000，按37天计；\n2、一嗨租车一辆，百万三者险，计5353；\n3、通行费，加油费，保养维修费计4400，私车公用计3600；\n5、自制档案架材料费计773；\n6、中秋礼品甲方屈2000，文1000，监理冯1000；月饼5盒1510。宴请暂不预算，据票报销。\n涉及到第二笔内业验收，商务标准是否合理，请领导批示。', NULL, '2020-09-15', 30000.00, 26400.00, '已核，私车公用费暂不出项，请公司明确私车公用计费原则。其他无意见，本次建议按26400.00元借支。', 13, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-17', '2020-09-22', '2020-09-24', NULL, NULL, '2020-09-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418852960087', NULL, '1', '华能集团电子商务平台数字证书更新费用', 22, 105, '开户行：工行北京经济技术开发区宏达北路支行\n付款方式：企业须使用本公司账号公对公进行支付费用！如使用非本公司账号进行汇款或现金支付、个人支付等其他形式支付我司将不予受理。（如需退款，请前往“国富安”网站下载“退款申请”整个退款过\n程需要6个月，烦请企业务必核实清楚再汇款。）\n开户账号：0200059009024509383\n纳税人识别号：91110302633713895D 银行行号：102100005905\n开户名称：北京国富安电子商务安全认证有限公司（务必填全称）', NULL, '2020-08-17', 200.00, 200.00, '同意', 15, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-17', '2020-08-17', '2020-08-19', NULL, NULL, '2020-08-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418852970088', NULL, '1', '信息管理体系审核认证费', 52, 109, '信息管理体系审核认证费用\n户名：北京中 大华远认证中心\n开户银行：北京银行阜城支行\n账号：01090323600120105228501\n联系电话 028-85573256', NULL, '2020-08-18', 15000.00, 0.00, '情况属实', 46, NULL, 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-18', '2020-08-20', '2020-08-24', NULL, NULL, '2020-08-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418852980089', '1648881418227154945', '0', NULL, 61, 111, '1、新增组按20 天工期预算；\n2、增加朋曲投入人员及车辆预算；', NULL, '2020-09-08', 81500.00, 60300.00, '同意', 61, '建议同意借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-08', '2020-09-08', '2020-09-10', NULL, NULL, '2020-09-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418852990090', '1648881418239737858', '0', NULL, 33, 110, '外业现场日常开销', NULL, '2020-08-24', 10000.00, 10000.00, '外业现场日常开销', 33, '建议同意借支。', 10, 2, '同意付款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-24', '2020-08-24', '2020-08-26', NULL, NULL, '2020-08-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418853000091', NULL, '1', '旅差费', 7, 102, '双江口施控网合同谈判', NULL, '2020-09-22', 30000.00, 30000.00, NULL, NULL, NULL, 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, NULL, '2020-09-22', '2020-09-25', NULL, NULL, '2020-09-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418853010092', NULL, '1', '其他开支', 142, 104, '根据工作需要，申请借款。', NULL, '2020-09-27', 50000.00, 50000.00, NULL, 142, '同意。', 2, 2, '可以支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-27', '2020-09-27', '2020-09-27', NULL, NULL, '2020-09-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418853020093', '1648881418227154945', '0', NULL, 61, 111, '1、本次借款为增补借款，前期借款预计可开支到9月底；\n2、工期按1个组8号回成都、一个组15号回成都计算；\n3、本次借款预算到项目组出场到成都。', NULL, '2020-09-27', 48000.00, 48000.00, NULL, 61, '建议同意借支', 10, 2, '可以支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-27', '2020-09-30', '2020-09-30', NULL, NULL, '2020-09-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418853030094', NULL, '1', '夏夏代周强借住院代垫费用', 22, 105, '公司代垫付周强住院医药费用等。', NULL, '2020-09-29', 70000.00, 70000.00, '同意代借款', 15, '同意', 4, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-29', '2020-09-29', '2020-10-20', NULL, NULL, '2020-10-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418853040095', NULL, '1', '用于网上抢购新跑模服务器显卡', 39, 108, '新配置的15台跑模服务器抢购显卡费用，由于电脑城现货单价要9000左右，和京东商城抢购价格很大，计划借款后多安排人员在京东商城抢购。', NULL, '2020-10-12', 97500.00, 97500.00, NULL, 39, '建议同意借支', 10, 2, '可以支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-12', '2020-10-13', '2020-10-14', NULL, NULL, '2020-10-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418853050096', '1648881417862250498', '0', NULL, 61, 111, '1、开州航飞及潼南水下同时借款；\n2、开州航飞预计4天、潼南水下预计6天，均包含进出场；', NULL, '2020-10-14', 8000.00, 8000.00, '建议同意借款', 61, '建议同意借支', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-14', '2020-10-15', '2020-10-15', NULL, NULL, '2020-10-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418853060097', NULL, '1', '三台县柳溪河等8条河流河道管理范围划定服务项目中标代理服务费', 22, 105, '我公司已中标本项目，根据招标文件的要求，本项目招标代理费金额24500元整由成交供应商在领取成交通知书前一次性付清。请财务部按如下银行信息办理转账中标代理服务费，谢谢！\n代理服务费收款银行：\n账户名称：四川利德邦招标代理有限公司\n开户银行：成都农商银行遂宁分行\n账户：024203000120010000253\n金额：24500元', NULL, '2020-10-19', 24500.00, 24500.00, '同意', 15, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-19', '2020-10-19', '2020-10-20', NULL, NULL, '2020-10-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418853070098', '1648881411499491362', '0', NULL, 83, 111, '该项目参与人员有夏志军、蒋剑虹、李科明（租车公司司机），主要进行配合测量工作，预计现场工作15天。', NULL, '2023-08-14', 7500.00, 7500.00, '同意借款。', 83, '建议借支。', 10, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-14', '2023-08-14', '2023-08-15', NULL, NULL, '2023-08-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418853080099', NULL, '1', '四川省脚木足河巴拉水电站工程测量中心技术服务投标保函服务费', 29, 106, NULL, NULL, '2020-10-22', 1980.00, 1980.00, '同意支付，中标服务费1980', 14, '同意', 2, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-22', '2020-10-26', '2020-10-26', NULL, NULL, '2020-10-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418853090100', NULL, '1', '雅安市名山区水利局河流河道管理范围划界项目中标服务费', 23, 105, NULL, NULL, '2020-06-28', 15000.00, 15000.00, '同意', 15, NULL, 7, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-28', '2020-06-28', '2020-06-28', NULL, NULL, '2020-06-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418853100101', '1648881418340401153', '0', NULL, 61, 111, '1，工期按15天计划；\n2、租车费用包含油费；\n3、司机和我们一起吃住，现场吃住成本按4人计算；', NULL, '2020-06-27', 31500.00, 22000.00, NULL, 61, '同意借支', 10, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-28', '2020-06-28', '2020-06-28', NULL, NULL, '2020-06-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418853110102', '1648881421402243074', '0', NULL, 61, 111, '1、按业主要求，需要将项目成果提交二院检查，并形成报告。\n2、借款为签订合同需要支付的检查费用。\n3、费用支付需采用公对公转账，户主：自然资源部第三地理信息制图院、开户银行：中国民生银行股份有限公司成都经济技术开发区支行、银行帐号：2018014400000062（自贡项目已经转过账）。', NULL, '2020-07-14', 5000.00, 5000.00, '建议借款。', 61, '甲方催交二院数据预检报告。建议批准。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-07-14', '2020-07-14', '2020-07-15', NULL, NULL, '2020-07-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418853120103', NULL, '1', '简阳河湖划界中标服务费', 15, 105, NULL, NULL, '2020-08-03', 47860.00, 47860.00, '同意', 15, '建议同意借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-03', '2020-08-03', '2020-08-05', NULL, NULL, '2020-08-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418853130104', NULL, '1', '自贡市沿滩新城区管理委员会卧龙湖东区基础测绘采购项目担保费', 14, 106, '担保金额478000，时间两年，担保费用2%', NULL, '2020-08-05', 9560.00, 9560.00, NULL, 14, '同意。', 2, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-10', '2020-08-10', '2020-08-10', NULL, NULL, '2020-08-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418853140105', NULL, '1', '南网数研院航飞影像服务（包1和包3）中标服务费', 15, 105, NULL, NULL, '2020-08-07', 44800.00, 44800.00, '同意', 15, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-07', '2020-08-07', '2020-08-07', NULL, NULL, '2020-08-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418853150106', NULL, '1', '西藏霞曲河湖项目技术评审交流', 33, 110, '西藏霞曲河湖项目技术评审，与成勘院水文专业等相关人员一起和西藏业主方交流技术，制作整个西藏河湖划界项目的技术标准和模板。', NULL, '2020-08-12', 6000.00, 6000.00, '地点是拉萨，需要乘坐飞机前往，2020.8.13出发，回来时间待定。', 33, '建议同意借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-12', '2020-08-12', '2020-08-14', NULL, NULL, '2020-08-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418853160107', NULL, '1', 'SCCORS技术服务费收费', 52, 109, '四川中水成勘院测绘工程公司  1个cors账号sczsck01年费，\n单位名称：自然资源部第三大地测量队 \n开户行：建行成都经济技术开发区支行 \n账 号：5100 1556 8080 5012 6868 \n注意：此账号不支持微信、支付宝和现金付费，支持手机银行、网上银行，银行自动柜台（不是ATM机）转账。', NULL, '2020-08-14', 8000.00, 0.00, NULL, 46, NULL, 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-17', '2020-08-20', '2020-08-24', NULL, NULL, '2020-08-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418853170108', NULL, '1', '日常采购费用', 142, 104, '其中一万元转账到隐秀尚庭酒店用于7+1会务定金，其余的用于公司日常采购开支。', NULL, '2020-09-02', 30000.00, 30000.00, NULL, 142, '按需使用。', 2, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-02', '2020-09-02', '2020-09-02', NULL, NULL, '2020-09-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418853180109', NULL, '1', '第十七届中国科学家论坛会务费', 47, NULL, '参加2020年第十七届中国科学家论坛会议', NULL, '2020-09-08', 2800.00, 0.00, '已阅核。', 13, NULL, 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-08', '2020-09-08', '2020-09-08', NULL, NULL, '2020-09-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418853190110', NULL, '1', '购买地形图资料（松潘抽蓄项目）', 52, 109, '经营发展部联系项目部，需购买松潘抽蓄项目地形图资料', NULL, '2023-08-07', 10500.00, 10500.00, '情况属实。', 46, '同意。', 9, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-07', '2023-08-07', '2023-08-09', NULL, NULL, '2023-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418853200111', NULL, '1', '购买测绘资料（阿坝抽水蓄能电站）', 52, 109, '经营发展部联系项目部，需购买阿坝抽蓄项目地形图资料', NULL, '2023-08-08', 7500.00, 7500.00, '情况属实。', 46, '同意。', 9, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-09', '2023-08-09', '2023-08-09', NULL, NULL, '2023-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418853210112', NULL, '1', '邻水宅基地项目现场开支（10月）', 59, NULL, '1、现代平衡杆等530，大众副驾把手350；\n8、上下床9张，简易折叠办公桌，椅子，锅碗瓢盆等；\n9、三角套、棉被、垫絮等', NULL, '2020-10-01', 54300.00, 54300.00, '已核。', 13, NULL, 7, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-19', '2020-10-19', '2020-10-20', NULL, NULL, '2020-10-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418853220113', '1648881418369761282', '0', NULL, 138, NULL, '项目开支', NULL, '2020-09-25', 2000.00, 2000.00, '已核，该费用为项目开展初期未找到合作单位的情况下，请西勘院帮忙做的管探，费用按照与四川世纪运德管道工程服务有限公司的分包合同单价进行计算，建议按此费用支付。', 13, NULL, 7, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-25', '2020-10-12', '2020-10-12', NULL, NULL, '2020-10-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418853230114', NULL, '1', '商务费用补报', 59, NULL, '以上4项费用应为公司报销，由于交发票到财务时沟通不足，被冲抵到邻水宅基地项目成本中，不能撤销。特申请补报。妥否，请领导批示。', NULL, '2020-10-19', 11701.00, 11701.00, '已核，情况属实。', 13, NULL, 7, 2, '可以支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-20', '2020-10-20', '2020-10-22', NULL, NULL, '2020-11-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418853240115', '1648881419619663874', '0', NULL, 39, 108, '罗江外业调绘开支成本，除去前期借款，外业垫付了1284元，故申请借款。', NULL, '2020-10-23', 1284.00, 1284.00, '程昊外业调绘垫付费用，同意借款。', 39, '同意', 11, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-23', '2020-10-28', '2020-11-04', NULL, NULL, '2020-11-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418853250116', NULL, '1', '购买大疆精灵4RTK飞机环绕飞行设备费用', 33, 110, '7块大疆精灵4RTK 电池，1个环绕飞行所需平板', NULL, '2020-10-26', 9800.00, 9800.00, '同意', 33, '建议同意借支。财务对公转账大疆电池7块，费用6440元\n公司名称：成都大亚商贸有限公司；\n开户行：成都银行八里庄支行；\n账号：1001300000304131）。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-26', '2020-10-26', '2020-11-04', NULL, NULL, '2020-11-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418853260117', '1648881418239737858', '0', NULL, 59, NULL, '泸县已进场，暂借前面2周工作费用。3、4项说明：\n3、私车公用预估费用，实际按里程结算；\n4、相控点工具、逆变器等材料预算；', NULL, '2020-08-17', 14000.00, 14000.00, '同意，暂按10000元预支，最终纳入总体成本预算内，请项目负责人尽快上报总体费用预算报公司审批。在总体费用预算范围内控制使用。', 13, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-18', '2020-08-18', '2020-08-19', NULL, NULL, '2020-08-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418853270118', '1648881418214572034', '0', NULL, 138, NULL, '预计5人10天的开支', NULL, '2020-08-31', 10000.00, 7000.00, '已核，建议按7000元借支。', 13, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-01', '2020-09-01', '2020-09-02', NULL, NULL, '2020-09-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418853280119', NULL, '1', '雅安市名山区水利局河流河道管理范围划界项目履约保函担保费', 14, 106, '中标金额2150000，履约保函担保金额=2150000*5%=107500', NULL, '2020-09-03', 1075.00, 1075.00, NULL, 14, '同意。', 2, 2, '可以支付，及时冲账。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-03', '2020-09-03', '2020-09-03', NULL, NULL, '2020-09-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418853290120', NULL, '1', '7+1会务费', 3, 101, NULL, NULL, '2020-09-10', 10000.00, 10000.00, NULL, NULL, '建议同意借支', 10, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, NULL, '2020-09-10', '2020-09-11', NULL, NULL, '2020-09-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418853300121', NULL, '1', '2020.10.01-2021.09.30', 8, 104, NULL, NULL, '2020-09-29', 166402.00, 166402.00, '同意', 142, '同意借款额度。', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-29', '2020-09-30', '2020-09-30', NULL, NULL, '2020-09-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418853310122', NULL, '1', '中国华电集团电子商务平台服务费（2021年度）', 22, 105, '由于工作投标需要，现需要更新中国华电集团电子商务平台集团级供应会员服务。故申请支付中国华电集团电子商务平台集团级供应会员，期限：20210101--20211231\n当期续费：金额:4800.0\n会员费用需通过公司建设银行网上银行支付，请审核！谢谢！', NULL, '2020-12-07', 4800.00, 4800.00, '同意', 15, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-07', '2020-12-07', '2020-12-10', NULL, NULL, '2020-12-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418853320123', '1648881417262465026', '0', NULL, 61, 111, '1、工期预计7天（含经出场）；\n2、人员3人（含驾驶员）；', NULL, '2020-12-23', 5000.00, 5000.00, '建议借款', 61, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-23', '2020-12-24', '2020-12-28', NULL, NULL, '2020-12-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418853330124', '1648881418034216962', '0', NULL, 83, 111, '因甲方内部未协商一致便通知我方进场施工，界桩埋设竣工后，甲方又决定更改红线布置方案，导致已经竣工的270根永久界桩需要挪动。部分界桩由于已经浇筑了混凝土底座且难以挪动，需要再新做约60根。', NULL, '2020-12-09', 25000.00, 25000.00, '同意。', 83, '建议同意借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-09', '2020-12-24', '2020-12-28', NULL, NULL, '2020-12-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418853340125', NULL, '1', '邻水农经权项目2020借款（第三次）重新提交', 59, NULL, NULL, NULL, '2020-12-17', 4400.00, 4400.00, '已核，情况属实。', 13, NULL, 7, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-21', '2020-12-21', '2020-12-22', NULL, NULL, '2020-12-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418853350126', '1648881417509928962', '0', NULL, 61, 111, '1、现场租用四驱越野车一辆、预计费用；\n2、预计工天12天，含进出场；\n3、其他包含五金及高原药品采购；', NULL, '2020-12-09', 26000.00, 26000.00, '建议借款', 61, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-09', '2020-12-09', '2020-12-10', NULL, NULL, '2020-12-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418853360127', '1648881418273292290', '0', NULL, 143, 110, NULL, NULL, '2020-10-14', 10000.00, 10000.00, NULL, 33, '建议同意借支', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-16', '2020-10-16', '2020-10-20', NULL, NULL, '2020-10-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418853370128', NULL, '1', '邻水宅基地项目二标内业验收开支', 59, NULL, '不含接待费，接待费本周验收完成后一并报销。', NULL, '2020-10-26', 15000.00, 15000.00, '已核。', 13, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-27', '2020-10-27', '2020-11-04', NULL, NULL, '2020-11-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418853380129', '1648881418994712578', '0', NULL, 102, 112, '10月份项目部成本支出，费用增加了桐子林基准年度复测。', NULL, '2020-10-27', 46320.00, 46320.00, NULL, 101, '建议同意借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-27', '2020-11-10', '2020-11-17', NULL, NULL, '2020-11-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418853390130', NULL, '1', '四川中水成勘院测绘工程公司  2个cors账号sczsck02、sczsck03年费一年', 52, 109, '四川中水成勘院测绘工程公司  2个cors账号sczsck02、sczsck03年费一年，\n单位名称：自然资源部第三大地测量队 \n开户行：建行成都经济技术开发区支行 \n账 号：5100 1556 8080 5012 6868 \n注意：此账号不支持微信、支付宝和现金付费，支持手机银行、网上银行，银行自动柜台（不是ATM机）转账。', NULL, '2020-10-29', 16000.00, 16000.00, '应作业部门要求及生产需求，购买开通2个SCCORS账号', 46, '公司目前只开通了一个cors账号，经常出现不同项目需要同时使用，影响作业效率。\n建议同意借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-29', '2020-10-29', '2020-11-04', NULL, NULL, '2020-11-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418853400131', '1648881417904193537', '0', NULL, 61, 111, '1、预计工天25天、人员3人（含驾驶员）；\n2、借款为预算，后期根据需要再补充借款；', NULL, '2020-10-30', 18500.00, 18500.00, '建议借款', 61, '建议同意借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-30', '2020-10-31', '2020-11-04', NULL, NULL, '2020-11-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418853410132', '1648881417820307458', '0', NULL, 61, 111, '1、预计工天10天；\n2、现场租用车辆，单价含油费；\n3、此次借款为前期土建工作开展费用，后期控制网观测根据实际情况补充借款；', NULL, '2020-10-30', 23700.00, 23700.00, '建议借款', 61, '建议同意借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-30', '2020-10-31', '2020-11-04', NULL, NULL, '2020-11-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418853420133', '1648881417769975809', '0', NULL, 83, 111, NULL, NULL, '2020-10-31', 20000.00, 20000.00, '同意借款。', 83, '建议同意借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-31', '2020-11-03', '2020-11-03', NULL, NULL, '2020-11-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418853430134', NULL, '1', '雅安市名山区水利局河流河道管理范围划界项目', 23, 105, NULL, NULL, '2020-06-15', 50000.00, 50000.00, '同意', 15, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-15', '2020-06-15', '2020-06-15', NULL, NULL, '2020-06-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418853440135', NULL, '1', '支付国家能源招投标网平台服务费（一年）', 22, 105, '双江口水电站施工测量控制网复测项目需要购买招标文件。', NULL, '2020-06-22', 3800.00, 3800.00, '同意', 15, NULL, 7, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-22', '2020-06-24', '2020-06-28', NULL, NULL, '2020-06-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418853450136', '1648881419548360705', '0', NULL, 83, 111, '雅砻江流域已进入汛期，因近日接连降雨外业工作开展不便，导致工期延后。', NULL, '2020-06-21', 8000.00, 8000.00, '情况属实，同意借款。', 83, '同意借款', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-21', '2020-06-22', '2020-06-22', NULL, NULL, '2020-06-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418853460137', NULL, '1', '邻水农经权项目2020借款（第一次）', 59, NULL, '邻水农经权项目结算截止2019年12月31日，在2020年1、2月产生的开支没有纳入，办理结算时已告知过主管领导，目前暂由我自己垫付。本周四五甲方组织县级验收，需要借款开支，遂将之前垫付的开支一并计入。明细说明如下：\n1】1、2月份到邻水催款的商务开支、住宿和用车开支（用车只计算了油费和过路费，用车成本未计）；\n2】6月和杨俊一起宴请农业局甲方，1336元，柑子仓库半年房租1400；端午送粽子460；合计3196；\n3】本周四五县级验收预计商务开支费用，凑整。', NULL, '2020-07-14', 12000.00, 12000.00, '同意，本次暂按12000元计列，请项目负责人测算后续总体预算报部门审批，按审批预算计划开支。', 13, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-07-14', '2020-07-14', '2020-07-15', NULL, NULL, '2020-07-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418853470138', NULL, '1', '自贡市沿滩新城区管理委员会卧龙湖东区基础地理测绘项目中标代理服务费', 22, 105, '财务部：\n我公司于2020年7月参加的“四川省自贡市沿滩区沿滩新城区管理委员会卧龙湖东区基础地理测绘采购项目”已中标。根据《招标文件》的要求，本项目中标后需要缴纳中标代理服务费，本项目中标金额为￥478.00万元（大写：肆佰柒拾捌万元整），代理服务费为￥48170.00元（大写：人民币肆万捌仟壹佰柒拾元整）。\n招标代理机构的账户信息如下：\n收款单位：中凯环球国际招标有限公司\n开户银行：中国建设银行股份有限公司自贡汇东支行\n账&nbsp;  号：5105&nbsp;0161&nbsp;0046&nbsp;0000&nbsp;0227\n\n请贵部协助尽快支付该笔款项。谢谢！\n备注：\n四川省自贡市沿滩区沿滩新城区管理委员会卧龙湖东区基础地理测绘采购项目代理服务费 \n              \n                                          经营发展部\n                                    2020年7月21日', NULL, '2020-07-21', 48170.00, 48170.00, '同意', 15, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-07-21', '2020-07-22', '2020-07-23', NULL, NULL, '2020-07-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418853480139', NULL, '1', '房地一体”宅基地使用权、集体建设用地使用权及房屋所有权不动产登记项目', 23, 105, NULL, NULL, '2020-08-11', 71060.00, 71060.00, '同意支付！', 20, '同意，尽快办理', 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-11', '2020-08-11', '2020-08-12', NULL, NULL, '2020-08-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418853490140', '1648881418227154945', '0', NULL, 61, 111, '借款按一车、5人（含司机）、30天预算，后期根据实际工期、人员车辆增加再申请借款。', NULL, '2020-08-20', 41000.00, 41000.00, '同意借款', 61, '建议同意借支', 10, 2, '同意付款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-20', '2020-08-21', '2020-08-26', NULL, NULL, '2020-08-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418853500141', NULL, '1', '购买安岳县集体建设用地使用权、宅基地“房地一体”不动产统一登记调查测绘监理项目（共1 个包段）招标文件', 22, 105, '根据代理机构的要求，需要从公司开户行账户对公转账300元至代理公司的指定账户。\n详见《安岳县集体建设用地使用权、宅基地“房地一体”不动产统一登记调查测绘监理项目（共1 个包段）磋商文件》第一章P3页的描述：\n七、磋商文件获取方式、时间、地点：\n磋商文件自2020 年9 月9 日至2020 年9 月15 日上午09：30 至11:30 下午14:30\n至16:30(节假日除)外在四川省安岳县岳城街道南山社区茶店子还房11 幢-1 获取。由于疫情原因，供应商可通过邮件报名。\n本项目磋商文件有偿获取，磋商文件售价：人民币300 元/份/包（磋商文件售后不退, 磋商资格不能转让）。\n      供应商按照采购公示内规定的报名费用以银行转账形式将报名费转账到四川鑫华信工程项目管理有限责任公司指定账户(转账时请备注公司名称，如无法备注公司名称请在转账成功后将转账图片及公司名称发送至邮箱scxhxgs@126.com：\n收款单位：四川鑫华信工程项目管理有限责任公司\n开户银行：中国建设银行股份有限公司成都沙河支行\n账号：51050110168600000071', NULL, '2020-09-11', 300.00, 300.00, '同意', 15, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-11', '2020-09-11', '2020-09-14', NULL, NULL, '2020-09-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418853510142', NULL, '1', '邻水农经权项目2020借款（第二次）', 59, NULL, '1、农经权汇交委外费用，按组算15元/组，财务转账；\n2、中秋节，曾1600化妆品；付、曾、陈、王、刘、财政局甘等，6盒月饼1800。宴请未预算，据票报销。\n涉及70%付款事宜，曾新到任，商务标准是否合适，请领导批示。', NULL, '2020-09-15', 38000.00, 4000.00, '已核，委外费用不予立项，以合同款的方式支付；商务费用基本合理，建议按3410.00元借支。', 13, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-17', '2020-09-22', '2020-09-24', NULL, NULL, '2020-09-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418853520143', '1648881418881466369', '0', NULL, 21, 105, '该项目水文分析划界部分初审', NULL, '2020-09-21', 10000.00, 10000.00, '同意', 15, '建议同意借支', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-21', '2020-09-21', '2020-09-22', NULL, NULL, '2020-09-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418853530144', '1648881418034216962', '0', NULL, 83, 111, NULL, NULL, '2020-10-08', 85000.00, 85000.00, '同意。', 83, '建议同意借支。', 10, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-08', '2020-10-12', '2020-10-12', NULL, NULL, '2020-10-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418853540145', NULL, '1', '邻水宅基地项目现场开支', 59, NULL, '此预算为2020-6-25至2020-8-24费用，由于项目预算未定，暂由项目经理垫付，前两项说明：\n1、临时工工资，4人，已先后离职，实际费用8180；\n2、租车带人工，1人1车、已离职，实际费用1120；', NULL, '2020-08-14', 56000.00, 56000.00, '已核，商务成本及员工开车补贴不予出项。商务成本按照一事一报原则处理。建议按4.8万预支。', 13, '同意', 7, 2, '就按照部门审批金额予以支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-18', '2020-08-18', '2020-08-19', NULL, NULL, '2020-08-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418853550146', '1648881418994712578', '0', NULL, 102, 112, '二滩监测项目部5月成本开支，本月增加了金龙山季度观测和二滩大坝季度观测，请审批。', NULL, '2020-05-29', 55820.00, 55820.00, '开支情况属实。', 101, '本年度前期已借支126720元。同意借支。', 10, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-29', '2020-06-01', '2020-06-01', NULL, NULL, '2020-06-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418853560147', '1648881418852106241', '0', NULL, 83, 111, '该项目成都院基础分公司现场共有7人，食、宿开支比较高。', NULL, '2020-05-30', 50000.00, 50000.00, NULL, 83, '路桥专业现场新增工作量。目前尚有10km中桩需测设。同意借支。', 10, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-05-30', '2020-06-01', '2020-06-01', NULL, NULL, '2020-06-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418853570148', NULL, '1', '水利水电信息网网费、四川地理信息产业协会会费', 9, 102, '水利水电信息网网费3000；四川地理信息产业协会2020年会费20000.', NULL, '2020-06-01', 23000.00, 23000.00, NULL, NULL, '同意借款。', 2, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, NULL, '2020-06-01', '2020-06-01', NULL, NULL, '2020-06-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418853580149', NULL, '1', '兰渝线CPⅢ复测购买比选文件', 23, 105, NULL, NULL, '2020-06-03', 500.00, 500.00, NULL, 15, NULL, 7, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-03', '2020-06-03', '2020-06-04', NULL, NULL, '2020-06-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418853590150', NULL, '1', '中国大唐集团公司电子商务平台2020.3-2021.3服务费', 22, 105, '由于工作需要，先申请借款3000元用于办理中国大唐集团公司电子商务平台的平台使用费续费事宜，请审批！谢谢！', NULL, '2020-06-03', 3000.00, 3000.00, NULL, 15, NULL, 7, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-03', '2020-06-03', '2020-06-04', NULL, NULL, '2020-06-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418853600151', '1648881418810163201', '0', NULL, 101, 112, NULL, NULL, '2020-06-19', 30000.00, 30000.00, NULL, 101, '同意借款', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-19', '2020-06-23', '2020-06-30', NULL, NULL, '2020-07-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418853610152', '1648881418411704322', '0', NULL, 83, 111, '该项目外业工作已结束，根据项目现场实际开支申请借款。', NULL, '2020-06-21', 5000.00, 5000.00, '情况属实，同意借款。', 83, '同意借款', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-21', '2020-06-22', '2020-06-28', NULL, NULL, '2020-06-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418853620153', '1648881418994712578', '0', NULL, 102, 112, '增加商务宴请及购买冷气扇。', NULL, '2020-06-24', 42160.00, 39260.00, NULL, 101, '2-5月已借支1825400元。同意此次借款。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-24', '2020-06-28', '2020-06-28', NULL, NULL, '2020-06-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418853630154', '1648881418881466369', '0', NULL, 21, 105, NULL, NULL, '2020-06-28', 80000.00, 40000.00, '同意', 15, '此项目之前已四次借支，共计327000元。本次借款为水文分析计算预付，同意借支40000元。', 10, 2, '同意借款，要专款专用。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-28', '2020-06-28', '2020-06-30', NULL, NULL, '2020-07-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418853640155', '1648881418369761282', '0', NULL, 83, 111, '该项目测绘工程中心投入6人，还需承担委外公司6人的食宿费用。（罗业华）', NULL, '2020-06-28', 10000.00, 10000.00, '情况属实，同意借款。', 83, '同意借款', 10, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-06-28', '2020-06-28', '2020-06-28', NULL, NULL, '2020-06-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418853650156', '1648881418483007490', '0', NULL, NULL, 107, '直升机租用', NULL, '2020-07-06', 250000.00, 0.00, '同意 ', NULL, NULL, 10, 2, '同意，专款专用。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-07-07', '2020-07-07', '2020-07-07', NULL, NULL, '2020-07-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418853660157', '1648881418558504961', '0', NULL, NULL, 111, '工地上真没钱了', NULL, '2020-07-07', 5000.00, 5000.00, '项目开支已发生垫付，出场还有成本产生。', 61, '建议同意本次借款。此项目前两次共计借支39150元。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-07-07', '2020-07-08', '2020-07-09', NULL, NULL, '2020-07-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418853670158', NULL, '1', '双江口施控网复测', 15, 105, NULL, NULL, '2020-07-20', 20000.00, 20000.00, '同意', 15, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-07-20', '2020-07-20', '2020-07-20', NULL, NULL, '2020-07-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418853680159', NULL, '1', '南涧至云县高速现场检查', 55, 109, '工期按7预计', NULL, '2020-07-20', 6000.00, 6000.00, '根据甲方检查情况，合理安排质量配合，及时还清借款。', 50, '同意。', 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-07-20', '2020-07-20', '2020-07-21', NULL, NULL, '2020-07-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418853690160', '1648881418810163201', '0', NULL, 101, 112, '以下为猴子岩监测项目部2020年三季度成本开销明细：\n1、伙食成本：每月人均1000元生活费，项目共计职工5人，考虑每月1人休假，每月生活费为4000元，一季度12000元。\n2、车辆成本：每月项目部车辆川A  5068Q燃油费约为2500元，本季度在姑咱做车辆保养一次1000元，共计2500*3+1000=8500元。\n3、办公耗材成本：打印纸、硒鼓、档案盒采购等其他零星费用2000元。\n4、三季度项目部员工正常进出场交通成本2000元。\n5、民工成本：每月根据观测需要和观测便道修整有固定民工2名，每月成本约4000元，一季度共计12000元。', NULL, '2020-08-03', 36500.00, 30000.00, NULL, 101, '本项目2020年前期共借支17.9万元。本次借支为三季度项目开支。\n建议同意借支', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-03', '2020-08-04', '2020-08-05', NULL, NULL, '2020-08-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418853700161', '1648881418994712578', '0', NULL, 102, 112, '2020年7月开支', NULL, '2020-07-20', 41060.00, 39560.00, NULL, 101, '建议同意借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-07-20', '2020-07-28', '2020-07-29', NULL, NULL, '2020-07-31');
INSERT INTO `cmc_borrow` VALUES ('1648881418853710162', '1648881418290069506', '0', NULL, 83, 111, '该项目共投入作业员7人，司机1人。因现场工作需要，计划现场另租皮卡车一辆。', NULL, '2020-07-23', 80000.00, 80000.00, '同意借款。', 83, '建议同意借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-07-23', '2020-07-28', '2020-07-29', NULL, NULL, '2020-07-31');
INSERT INTO `cmc_borrow` VALUES ('1648881418853720163', NULL, '1', '白玉县测绘项目', 14, 106, NULL, NULL, '2020-08-05', 101000.00, 101000.00, '同意', 14, '同意。', 2, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-05', '2020-08-05', '2020-08-05', NULL, NULL, '2020-08-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418853730164', NULL, '1', '区重点基础设施项目征地拆迁测绘服务采购', 23, 105, NULL, NULL, '2020-08-13', 12000.00, 12000.00, '同意！', 20, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-13', '2020-08-13', '2020-08-14', NULL, NULL, '2020-08-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418853740165', NULL, '1', '2020年第五期市政排水管道有限空间作业安全培训班（线上培训）', 138, NULL, '培训单位：北京中管恒兴国际管道工程技术研究院有限公司\n开户行：上海浦东发展银行股份有限公司北京方庄支行\n账    号：91450078801000000739', NULL, '2020-08-14', 2400.00, 2400.00, '同意。', 13, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-17', '2020-08-17', '2020-08-19', NULL, NULL, '2020-08-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418853750166', '1648881418256515073', '0', NULL, 61, 111, '预计4人（含驾驶员）、工期20天', NULL, '2020-08-17', 16800.00, 16800.00, '拟同意借款', 61, '建议同意借支', 10, 2, '同意付款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-17', '2020-08-21', '2020-08-26', NULL, NULL, '2020-08-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418853760167', '1648881418239737858', '0', NULL, 33, 110, '项目现场住宿、用餐、其它费用支出。', NULL, '2020-09-07', 15000.00, 15000.00, '项目现场住宿、用餐、其它费用支出。', 33, '建议同意借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-07', '2020-09-07', '2020-09-07', NULL, NULL, '2020-09-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418853770168', '1648881418185211906', '0', NULL, NULL, 107, NULL, NULL, '2020-09-11', 30000.00, 30000.00, NULL, NULL, NULL, 10, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2020-09-11', '2020-09-11', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418853780169', '1648881418239737858', '0', NULL, 33, 102, '购买测图软件和外业现场住宿吃饭及日杂。', NULL, '2020-09-21', 13000.00, 13000.00, NULL, 33, '建议同意借支', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-21', '2020-09-21', '2020-09-22', NULL, NULL, '2020-09-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418853790170', NULL, '1', '车辆保险费', 16, 200, NULL, NULL, '2020-09-21', 20000.00, 20000.00, '同意', 142, '同意。', 2, 2, '可以支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-21', '2020-09-22', '2020-09-22', NULL, NULL, '2020-09-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418853800171', NULL, '1', '四川公司阿水公司绰斯甲水电站工程施工测量控制网复测技术服务询价采购', 23, 105, NULL, NULL, '2020-09-21', 48552.60, 48552.60, '同意', 15, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-21', '2020-09-22', '2020-09-24', NULL, NULL, '2020-09-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418853810172', '1648881418239737858', '0', NULL, 33, 110, '泸县项目日常外业住宿吃饭费用，15台服务器购买显卡费用，4名实习生意外保险费用，派张敏到水校空三的住宿费用。', NULL, '2020-10-11', 116760.00, 17760.00, NULL, 33, '显卡属于固定资产投入，不在项目费用借支。可单独借支。', 10, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-11', '2020-10-12', '2020-10-12', NULL, NULL, '2020-10-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418853820173', NULL, '1', '地下管线专委会会费', 148, 104, '缴纳地下管线专委会2020年会费。转账信息---户名：四川省市政市容协会；开户行：交通银行成都南二环路支行；账号：511609017018000576189', NULL, '2020-10-13', 3000.00, 3000.00, '同意', 142, '同意支付', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-13', '2020-10-14', '2020-10-14', NULL, NULL, '2020-10-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418853830174', '1648881417837084674', '0', NULL, 61, 111, '1、常规外业工期预计9（含无人船），航飞预计3天；\n2、其他包括现场千寻账号及五金配件；', NULL, '2020-10-15', 6500.00, 6500.00, '建议同意', 61, '建议同意借支。', 10, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-15', '2020-10-28', '2020-11-04', NULL, NULL, '2020-11-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418853840175', '1648881418810163201', '0', NULL, 101, 112, '该费用为猴子岩10月份生产经费。国庆期租车是因为雷光泽车辆需要回来年审和维修，工地现场需要观测。另外试用期员工工资为9月17日至10月31日（试用员工邓静9月17日去猴子岩），按150元每天支付，150*45=6750。', NULL, '2020-10-16', 22050.00, 22050.00, NULL, 101, '建议同意借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-16', '2020-10-28', '2020-11-04', NULL, NULL, '2020-11-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418853850176', '1648881419045044225', '0', NULL, 59, NULL, '美姑项目用车的加油费被误冲抵', NULL, '2020-10-19', 1125.00, 1125.00, '已核，情况属实。', 13, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-20', '2020-10-20', '2020-10-22', NULL, NULL, '2020-11-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418853860177', '1648881417539289089', '0', NULL, 61, 111, '1、工期按18天计算，含进出场；\n2、飞行组按2人、5天计算；', NULL, '2020-11-30', 21800.00, 21800.00, '建议借款', 61, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-30', '2020-12-03', '2020-12-04', NULL, NULL, '2020-12-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418853870178', NULL, '1', '编制《四川省旅游资源保护与利用指南》关于“五大经济区旅游产品发展方向及旅游资源开发条件评价研究”的合', 15, 105, '项目款', NULL, '2020-12-04', 110500.00, 110500.00, '同意', 15, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-04', '2020-12-04', '2020-12-04', NULL, NULL, '2020-12-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418853880179', NULL, '1', '日常采购费用', 142, 104, '用于公司日常采购开支。', NULL, '2020-11-02', 20000.00, 20000.00, NULL, 142, '同意', 2, 2, '同意支付，要合理使用。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-02', '2020-11-03', '2020-11-03', NULL, NULL, '2020-11-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418853890180', NULL, '1', '邻水宅基地项目现场开支（11月）', 59, NULL, NULL, NULL, '2020-11-04', 47000.00, 47000.00, '已核，基本合理。', 13, '同意', 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-06', '2020-11-12', '2020-11-19', NULL, NULL, '2020-11-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418853900181', '1648881417438625793', '0', NULL, 61, 111, '1、借款金额为实际开销；\n2、借款包括瀑布沟新增影响区及老鹰岩航飞工作；', NULL, '2020-11-30', 2876.00, 2876.00, '已发生实际费用，由项目经理垫付，建议借款。', 61, '建议借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-30', '2020-12-30', '2020-12-30', NULL, NULL, '2020-12-31');
INSERT INTO `cmc_borrow` VALUES ('1648881418853910182', NULL, '1', '邻水宅基地项目现场开支（一事一报）12.3', 59, NULL, NULL, NULL, '2020-12-04', 799.00, 799.00, '已核，同意。（处理举报信）', 13, '同意', 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-07', '2020-12-07', '2020-12-10', NULL, NULL, '2020-12-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418853920183', '1648881418994712578', '0', NULL, 102, 112, '12月份开支，增加金龙山季度观测。', NULL, '2020-12-03', 62080.00, 55580.00, NULL, 101, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-03', '2020-12-16', '2020-12-16', NULL, NULL, '2021-01-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418853930184', '1648881418239737858', '0', NULL, 33, 110, '泸县项目外业现场生活费用', NULL, '2020-11-20', 10000.00, 10000.00, '同意', 33, '建议同意借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-20', '2020-11-25', '2020-12-10', NULL, NULL, '2020-12-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418853940185', '1648881417472180225', '0', NULL, 61, 111, '1、预计工天5天，现场含司机3人；\n2、交通成本主是现场租车费用，预计租用四驱越野车，含司机；\n3、进出场成本借到紫霞项目。', NULL, '2020-12-08', 7000.00, 7000.00, '建议借款', 61, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-09', '2020-12-17', '2020-12-29', NULL, NULL, '2020-12-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418853950186', NULL, '1', '蒲江县主要河流数字高程模型测绘项目报名费', 23, 105, '蒲江县主要河流数字高程模型测绘项目报名费公对公转账。', NULL, '2020-12-14', 200.00, 200.00, '同意', 15, NULL, 7, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-14', '2020-12-14', '2020-12-15', NULL, NULL, '2020-12-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418853960187', NULL, '1', '眉山东部新城起步区1:500地形测绘项目', 15, 105, '商务费', NULL, '2020-12-17', 13000.00, 13000.00, '同意', 15, NULL, 7, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-17', '2020-12-17', '2020-12-21', NULL, NULL, '2020-12-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418853970188', NULL, '1', '眉山东部新城起步区1:500地形测绘服务采购项目', 23, 105, '公司名称：四川宏佳工程项目咨询管理有限公司\n开户银行：成都银行股份有限公司眉山分行\n开户账号：1031300000620730', NULL, '2020-12-17', 60468.00, 60468.00, '同意', 15, NULL, 7, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-17', '2020-12-17', '2020-12-21', NULL, NULL, '2020-12-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418853980189', '1648881419607080962', '0', NULL, 113, NULL, '南江项目总借款为403568元，已借271700元，剩余131868元，本次借款30000。本次借款用时一个月，其中现场人员为5人，目前为外业整改检查期间，每人每天60元，共计18000元，车辆为4500元，油费按照每公里0.8元补贴，预计10000元。耗材预计1000元，水电气等预计1000元，共计30000元。', NULL, '2020-12-17', 30000.00, 30000.00, '已核，拟同意。', 13, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-17', '2020-12-17', '2020-12-21', NULL, NULL, '2020-12-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418853990190', NULL, '1', '邻水宅基地项目现场开支（12月）重新提交', 59, NULL, '6，初验费用预算的15000不足，补1000；\n7，单程车费标准135，一学生中途去南江，所以是14人进场，13人出场；\n8，实习津贴，预支部分。', NULL, '2020-12-17', 30000.00, 30000.00, '已核，情况属实。', 13, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-21', '2020-12-21', '2020-12-22', NULL, NULL, '2020-12-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418854000191', NULL, '1', '三台县“十四五”水利发展和水利国土空间等3个规划编制中标代理服务费', 22, 105, '三台县“十四五”水利发展和水利国土空间等3个规划编制项目的采购代理费用由采购代理机构参照“计价格【2002】1980号”文件向成交供应商收取，本项目代理服务费79800元整由供应商在领取成交通知书前一次性付清。\n代理服务费汇款银行信息如下：\n账户名称：四川利德邦招标代理有限公司\n开户银行：成都农商银行遂宁分行\n账户：024203000120010000253\n\n请尽快办理，谢谢！', NULL, '2020-10-12', 79800.00, 79800.00, '同意', 15, '同意', 7, 2, '可以支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-12', '2020-10-12', '2020-10-12', NULL, NULL, '2020-10-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418854010192', '1648881418273292290', '0', NULL, 143, 110, NULL, NULL, '2020-10-14', 10000.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418854020193', '1648881417971302402', '0', NULL, 101, 112, '1、垫支开支为之前借款成本不够，本次补充借款。\n2、二次进场开支为11月9日再次进场补测水准（含燃油费、生活费、食宿费、民工费等）', NULL, '2020-11-10', 15865.00, 0.00, '2次进场预计工期一周左右（含进出场）', 101, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2020-11-10', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418854030194', '1648881418239737858', '0', NULL, 59, NULL, '开户单位：泸县不动产登记中心 帐号：2304348609201025669  开户行：工行泸县支行', NULL, '2020-11-18', 21375.00, 21375.00, '按照合同第十条、其他 2、“乙方承担《不动产证书》工本费2.86元每本（以自然部实际收费为准），测绘成果需全部通过质检，质检费用甲方与乙方各承担一半。”的约定，同意办理。', 20, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-19', '2020-11-20', '2020-11-20', NULL, NULL, '2020-11-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418854040195', '1648881418810163201', '0', NULL, 101, 112, '该费用为11月份生产经费。本月启动猴子岩水电站监测控制网年度观测（2020年度），每年观测一次（观测时间约为20天～25天），新加入4个当地民工，并购买意外伤害险。试用期员工为邓静，每天150元，本月4500元。', NULL, '2020-11-23', 24200.00, 21400.00, NULL, 101, '建议同意借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-23', '2020-11-25', '2020-12-10', NULL, NULL, '2021-01-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418854050196', '1648881418239737858', '0', NULL, 33, 110, '1  泸县项目4名实习生10月份和11月份租房子费用，2个房间（每间房每个月800);   \n2  11月份的餐补。\n实习生的所有成本由项目承担。', NULL, '2020-11-26', 4200.00, 4200.00, '四名实习生11月底结束实习返回学习。同意。', 33, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-26', '2020-12-07', '2020-12-10', NULL, NULL, '2020-12-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418854060197', NULL, '1', '邻水宅基地项目二标县级初验开支', 59, NULL, '不含接待费，接待费用下周验收完成后报销。', NULL, '2020-11-12', 15000.00, 15000.00, '已核，验收需要，建议借支。', 13, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-13', '2020-11-16', '2020-11-19', NULL, NULL, '2020-11-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418854070198', '1648881417887416322', '0', NULL, NULL, 107, NULL, NULL, '2020-11-02', 25000.00, 12500.00, '同意', NULL, '暂按15天预算。建议同意借支。', 10, 2, '同意上述意见。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-02', '2020-11-09', '2020-11-10', NULL, NULL, '2020-11-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418854080199', NULL, '1', '培训', 8, 104, '名称：深圳市中旭企业管理股份有限公司成都分公司\n开户行、账号：中国农业银行成都青羊支行 22891201040030682', NULL, '2020-11-17', 7500.00, 7500.00, '同意。', 142, '可以借款。', 2, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-17', '2020-11-17', '2020-11-17', NULL, NULL, '2020-11-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418854090200', '1648881419376394242', '0', NULL, 83, 111, '因甲方临时接到成都市基本农田调查任务（备注占用基本农田的房屋是否为2016年前后修建），且要求24小时内完成。已查阅合同，该新增工作量非合同约定之要求，为甲方委托我们帮忙。', NULL, '2020-12-02', 6000.00, 6000.00, '同意借款。', 83, '情况已核实。建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-02', '2020-12-03', '2020-12-04', NULL, NULL, '2020-12-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418854100201', '1648881418881466369', '0', NULL, 21, 105, '根据甲方评审要求对该8条河流补调', NULL, '2020-11-10', 20000.00, 20000.00, '同意', 15, '建议同意。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-10', '2020-11-11', '2020-11-11', NULL, NULL, '2020-11-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418854110202', NULL, '1', '申请支付国家高速公路网G5615天保至猴桥高速公路天保至文山段初步设计阶段测量劳务分包项目中标代理服务费', 22, 105, '招标代理服务费: 中标人在中标通知书发出之前应将招标代理服务费贰万壹仟元整(￥21000.00 元)一次性支付给 本项目招标代理机构。\n单位名称:武汉大通工程建设有限公司,\n开户行:中国建设银行股份有限公司武汉汉阳支行,\n帐号:42001218008050011870。\n申请财务部按照上述银行账户信息支付本项目的中标代理服务费21000元。谢谢！', NULL, '2020-11-06', 21000.00, 21000.00, '同意支付', 15, '同意', 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-12', '2020-11-12', '2020-11-19', NULL, NULL, '2020-11-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418854120203', NULL, '1', '贷款担保费', 29, 106, '贷款额度500万，担保费=500万*0.02*0.9=9万。', NULL, '2020-11-20', 90000.00, 90000.00, NULL, 14, '同意借款。', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-20', '2020-11-20', '2020-11-20', NULL, NULL, '2020-11-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418854130204', '1648881418881466369', '0', NULL, 21, 105, '水文评审（第二次）', NULL, '2020-11-23', 16000.00, 16000.00, '同意', 15, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-23', '2020-11-23', '2020-11-23', NULL, NULL, '2020-11-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418854140205', '1648881418994712578', '0', NULL, 102, 112, '11月份借款，增加二滩控制网复测费用。', NULL, '2020-11-30', 60380.00, 56880.00, NULL, 101, '建议同意借。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-01', '2020-12-09', '2020-12-10', NULL, NULL, '2020-12-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418854150206', '1648881417820307458', '0', NULL, 61, 111, '1、本次借款为补充借款；\n2、因上次借款还有剩余，故本次只做增加部分的借款；', NULL, '2020-11-30', 10400.00, 10400.00, '建议借款', 61, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-30', '2020-12-31', '2020-12-31', NULL, NULL, '2020-12-31');
INSERT INTO `cmc_borrow` VALUES ('1648881418854160207', NULL, '1', '咨询费 ', 14, 106, '重庆千汇工商咨询有限公司\n华夏银行股份有限公司重庆江北支行\n11253000000867591', NULL, '2020-12-04', 11000.00, 11000.00, NULL, 14, '预算内支出', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-04', '2020-12-07', '2020-12-07', NULL, NULL, '2020-12-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418854170208', NULL, '1', '双江口项目担保费', 14, 106, '合同金额385.51万元，担保保函金额=合同金额*10%=38.551。担保费用38.551万*0.15%*36个月=20817.54\n开户名：成都中小企业融资担保有限责任公司\n开户行：成都银行体育场路支行\n担保费账号：3002 2010 2186 1150 0012', NULL, '2020-11-09', 20817.54, 20817.54, NULL, 14, '同意。', 2, 2, '可以支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-09', '2020-11-09', '2020-11-09', NULL, NULL, '2020-11-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418854180209', '1648881421402243074', '0', NULL, 61, 111, '1、项目结束，要收尾款，需到项目所在地备案完税；\n2、到业主公司移交资料，要产生车费、食宿成本；', NULL, '2020-11-18', 7000.00, 7000.00, '建议借款', 61, '建议同意借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-18', '2020-11-20', '2020-11-20', NULL, NULL, '2020-11-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418854190210', '1648881417564454914', '0', NULL, 83, 111, '用工成本为：埋设控制点聘请工人背水泥及沙子，GNSS观测时看守设备。', NULL, '2020-11-16', 4500.00, 4500.00, '同意。', 83, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-17', '2020-12-07', '2020-12-10', NULL, NULL, '2020-12-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418854200211', NULL, '1', '购置车辆费用', 142, 104, '购置公司生产车辆费用。', NULL, '2020-12-04', 270000.00, 270000.00, NULL, 142, '同意，合理使用。', 2, 2, '可以支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-04', '2020-12-04', '2020-12-04', NULL, NULL, '2020-12-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418854210212', '1648881418034216962', '0', NULL, 83, 111, '由于测区植被茂密，界桩埋设难度增大，且由于甲方原因（部分段红线需调整、配合甲方办理相关手续等）工期预计增加10日。', NULL, '2020-10-31', 55000.00, 55000.00, '同意。', 83, '建议同意借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-31', '2020-11-03', '2020-11-04', NULL, NULL, '2020-11-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418854220213', NULL, '1', '购买几内亚Amaria水电站建设征地与移民系统开发项目招标文件费用', 22, 105, '因工作需要，先需要在特变电工平台（https://scm.tbea.com）购买几内亚Amaria水电站建设征地与移民系统开发项目招标文件，\n招标编号：TBEA-SB-AMLY-FW-2021-001\n金额：500.25元\n请审批，谢谢！', NULL, '2021-01-28', 500.25, 500.25, '同意', 15, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-28', '2021-01-28', '2021-01-28', NULL, NULL, '2021-01-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418854230214', '1648881417077915649', '0', NULL, NULL, 107, NULL, NULL, '2021-01-28', 5000.00, 5000.00, NULL, NULL, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-28', '2021-01-28', '2021-01-28', NULL, NULL, '2021-01-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418854240215', '1648881416641708034', '0', NULL, 101, 112, '长河坝金汤乡增测 新联料场和引水线路地形图测绘', NULL, '2021-02-24', 19500.00, 19500.00, '本费用为2021年2月份生产经费。', 101, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-02-24', '2021-02-26', '2021-03-02', NULL, NULL, '2021-03-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418854250216', NULL, '1', '邻水宅基地项目现场开支2021，2-3月（40天）', 59, NULL, '单位为月，单价实际为40天的单价', NULL, '2021-03-03', 31300.00, 31300.00, '同意', 142, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-04', '2021-03-04', '2021-03-08', NULL, NULL, '2021-03-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418854260217', NULL, '1', '项目前期洽谈', 21, 105, '1.邻水国土局 3000（自然资源确权）预算\n2.德阳水务局、住建局5000（河道整治测绘项目）预算\n3.邻水农业局3000（收款前期洽谈）预算', NULL, '2021-03-04', 11000.00, 11000.00, '已核，请严格控制花销，拟同意。', 13, NULL, 7, 2, '同意上述意见，可以支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-04', '2021-03-05', '2021-03-10', NULL, NULL, '2021-03-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418854270218', '1648881418239737858', '0', NULL, 33, 110, '外业现场生活费用', NULL, '2020-12-19', 20000.00, 20000.00, '同意', 33, '建议同意借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-19', '2020-12-21', '2020-12-22', NULL, NULL, '2020-12-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418854280219', '1648881417849667586', '0', NULL, 13, NULL, '大邑县农村乱占耕地建房问题摸排工作劳务工作委托四川国高工程项目管理有限公司承担实施，因承接合同暂未签订导致劳务分包合同谈价无法谈定，该摸排工作暂告于段落，从2020年9月下旬开始，劳务公司投入大量人力物力开展此项工作，为支撑项目，先期以借款的形式借支给劳务公司。', NULL, '2020-12-21', 100000.00, 100000.00, '已核，请领导批示。', 13, NULL, 7, 2, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2020-12-21', '2020-12-21', '2020-12-22', NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418854290220', '1648881418239737858', '0', NULL, 59, NULL, '已一事一报；\n1、中秋礼品等；\n2、国庆接待（唐参与）', NULL, '2020-12-08', 11471.00, 11471.00, '同意申请！', 20, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-14', '2020-12-14', '2020-12-15', NULL, NULL, '2020-12-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418854300221', NULL, '1', '备用金借款', 14, 106, NULL, NULL, '2020-12-16', 20000.00, 20000.00, NULL, 14, '同意', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-16', '2020-12-16', '2020-12-16', NULL, NULL, '2020-12-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418854310222', NULL, '1', '猴子岩水电站2020年竣工结算税金', 101, 112, '猴子岩水电站外观监测项目合同竣工结算金额3,716,292.63元，需在地方国税局缴纳5%税金。', NULL, '2020-12-09', 185000.00, 185000.00, NULL, 101, '建议同意借支。', 10, 2, '可以支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-09', '2020-12-09', '2020-12-10', NULL, NULL, '2020-12-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418854320223', NULL, '1', '备用金借款', 14, 106, NULL, NULL, '2020-12-10', 20000.00, 20000.00, NULL, 14, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-10', '2020-12-10', '2020-12-10', NULL, NULL, '2020-12-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418854330224', NULL, '1', '锦江区农村乱占耕地建房问题摸排中标服务费', 15, 105, '同意', NULL, '2020-12-18', 22664.00, 22664.00, '同意', 15, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-18', '2020-12-21', '2020-12-22', NULL, NULL, '2020-12-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418854340225', '1648881418810163201', '0', NULL, 101, 112, '该费用为2020年12月份生产经费。试用期员工为邓静，12月1日～12月15日为试用期，16日后与公司签订劳动合同，费用为每天150元*15天=2250元。     \n另外，太平驿项目OA系统未登记（无法申请项目开支借款，一并在猴子岩项目中申请），去年共计观测12次，每次燃油费300元，每次餐费200元（午餐和晚餐），每次现场观测固定开支500元。 全年12次生产经费为500元*12次=6000元。', NULL, '2020-12-20', 23750.00, 23750.00, NULL, 101, '建议同意借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-20', '2020-12-24', '2020-12-28', NULL, NULL, '2021-01-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418854350226', NULL, '1', '标书购买费', 24, 105, '烟台市福山区智造芯城项目测绘服务单位选定项目报名费', NULL, '2020-12-30', 300.00, 300.00, '同意', 15, NULL, 7, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-30', '2020-12-30', '2020-12-30', NULL, NULL, '2020-12-31');
INSERT INTO `cmc_borrow` VALUES ('1648881418854360227', '1648881417006612482', '0', NULL, 61, 111, NULL, NULL, '2020-12-31', 30600.00, 30600.00, '建议同意借款', 61, '建议同意借支。空域申请费用共计3.5万元，借款2万支付首期款，直接转账。\n开户行：华夏银行股份有限公司北京国贸支行\n户名：北京毅扬科技有限公司\n银行账号：10263000000938119', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-31', '2020-12-31', '2020-12-31', NULL, NULL, '2020-12-31');
INSERT INTO `cmc_borrow` VALUES ('1648881418854370228', NULL, '1', '飞马D200S-无人机机身一切保险和第三责任险', 55, 104, '飞马无人机D200S  2021年度保险费用', NULL, '2021-01-05', 24500.00, 24500.00, '同意.', 142, '同意。', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-05', '2021-01-05', '2021-01-05', NULL, NULL, '2021-01-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418854380229', NULL, '1', '2020年年度工作会费用', 142, 104, '2020年年度工作会会务费及用餐费用', NULL, '2021-01-05', 30000.00, 30000.00, '同意。', 142, '同意。', 2, 2, '可以支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-05', '2021-01-05', '2021-01-05', NULL, NULL, '2021-01-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418854390230', '1648881417509928962', '0', NULL, 61, 111, '1、本次借款为补充借款；\n2、因飞机批文原因，实际共计比原预计工期超出约12天；\n3、本次补充飞行组一人成本（含进出场机票）；\n4、吃住成本含租车司机，单价根据现场实际开支做了调整；\n5、燃油费因为里面没有加油站，单价高于市场价格，金额根据已发生费用实际预算；', NULL, '2020-12-31', 29600.00, 29630.00, '建议借款', 61, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-31', '2020-12-31', '2021-01-05', NULL, NULL, '2021-01-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418854400231', NULL, '1', '四川省巴中市通江县自然资源和规划局农村“房地一体”确权登记发证采购项目第四包', 15, 105, '收款单位：四川中汇恒工程项目管理咨询有限公司\n开 户 行：中国建设银行股份有限公司成都慧谷支行\n银行账号：51001860041052507208', NULL, '2020-12-31', 65443.00, 65443.00, '同意', 15, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-31', '2020-12-31', '2020-12-31', NULL, NULL, '2021-01-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418854410232', NULL, '1', '飞马无人机D200，2021年度保险费用', 55, 104, '飞马无人机D200,2021年度保险，其中机身一切险21000元，第三责任险3500元，合计24500元。', NULL, '2021-01-06', 24500.00, 24500.00, '同意。', 142, '建议同意借支。', 10, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-06', '2021-01-06', '2021-01-11', NULL, NULL, '2021-01-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418854420233', '1648881419607080962', '0', NULL, 113, NULL, '南江项目总借款为403568元，已借301700元，剩余101868元，本次借款60000元。其中人员成本为实习生工资，南江项目从6月份陆续有5名实习生现场实习，直至12月初结束，期间项目部累计支付工资30000余元，项目部花费生活费38000元，前期已借款18000元，本次借款20000元。车辆合同还剩一个月，租车费4500元，油费按照0.8元每公里补助，预计10000元，本次借款共计60000元整。', NULL, '2021-01-06', 60000.00, 60000.00, '已核，拟同意。', 13, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-11', '2021-01-13', '2021-01-14', NULL, NULL, '2021-01-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418854430234', NULL, '1', '投标保函担保费', 30, 106, '1、山西浑源抽水蓄能电站施工测量控制网建立与复测服务担保费  2、山东泰安二期抽水蓄能电站施工测量控制网建立与复测服务担保费。\n户名:四川中联盛非融资性担保有限公司\n开户行:建行成都新华支行\n账号:5105 0187 0836 0000 3698', NULL, '2021-01-08', 1870.00, 1870.00, NULL, 14, '同意', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-08', '2021-01-11', '2021-01-11', NULL, NULL, '2021-01-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418854440235', NULL, '1', '担保费', 30, 106, '四川省脚木足河巴拉水电站工程测量中心技术服务项目担保费。\n户名：成都中小企业融资担保有限责任公司\n账号：3002 2010 2186 1150 0012\n开户行：成都银行体育场路支行', NULL, '2021-01-12', 15000.00, 15000.00, NULL, 14, '同意。', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-13', '2021-01-13', '2021-01-13', NULL, NULL, '2021-01-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418854450236', NULL, '1', '报考AOPA驾驶证', 34, 107, NULL, NULL, '2021-01-12', 9000.00, 9000.00, NULL, NULL, '建议借支。取证后，持证在公司工作4年以上。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-13', '2021-01-13', '2021-01-14', NULL, NULL, '2021-01-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418854460237', '1648881416759148545', '0', NULL, 61, 111, '飞行前进行飞行批文办理，本次借款为批文办理费用。', NULL, '2021-01-13', 12000.00, 12000.00, '建议借款并尽快支付', 61, '建议同意，尽快办理。', 10, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-13', '2021-01-13', '2021-01-13', NULL, NULL, '2021-01-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418854470238', NULL, '1', '车辆燃油费及保险费用', 16, 200, NULL, NULL, '2021-01-13', 2000.00, 2000.00, '同意', 142, '同意', 2, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-13', '2021-01-14', '2021-01-14', NULL, NULL, '2021-01-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418854480239', '1648881417077915649', '0', NULL, 83, 111, '以上费用为激光技术部外业现场的开支。', NULL, '2021-01-13', 10000.00, 10000.00, '同意。', 83, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-13', '2021-01-13', '2021-01-14', NULL, NULL, '2021-01-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418854490240', NULL, '1', '车辆燃油费及保险费用', 16, 200, NULL, NULL, '2021-01-13', 0.00, 18000.00, '同意。', 142, '同意', 2, 2, '可以支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-13', '2021-01-14', '2021-01-14', NULL, NULL, '2021-01-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418854500241', NULL, '1', '办公电脑', 24, 105, '经营发展部申请购买电脑3台', NULL, '2021-01-13', 20000.00, 20000.00, '同意', 15, '预支费用，按实报销', 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-13', '2021-01-14', '2021-01-14', NULL, NULL, '2021-01-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418854510242', '1648881416620736513', '0', NULL, 21, 105, '该项目内外业和洪水分析评审', NULL, '2021-01-14', 17500.00, 17500.00, '同意', 15, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-14', '2021-01-14', '2021-01-14', NULL, NULL, '2021-01-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418854520243', '1648881416792702977', '0', NULL, 83, 111, NULL, NULL, '2021-01-14', 10000.00, 10000.00, '同意。', 83, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-14', '2021-01-22', '2021-01-27', NULL, NULL, '2021-01-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418854530244', NULL, '1', '邻水宅基地项目现场开支（12月）重新提交（补）', 59, NULL, '说明：12月已按3万元支借，现补齐剩余费用。\n1、实习生津贴，2020年未处理部分。\n2、水电气网费用（冬天取暖，电费较高）\n3、成果资料由项目部整体生成后交邻水当地印刷厂打印装订，单价0.06元/页', NULL, '2021-01-02', 30483.00, 30483.00, '已核。', 13, NULL, 7, 2, '同意上述意见。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-04', '2021-01-04', '2021-01-05', NULL, NULL, '2021-01-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418854540245', '1648881418239737858', '0', NULL, 33, 110, '殷泽印泸县项目结算，殷泽印试用期后未签订合同。', NULL, '2021-01-16', 5785.00, 5785.00, '试用3个月，结算5785，同意。', 33, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-16', '2021-01-28', '2021-01-28', NULL, NULL, '2021-01-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418854550246', NULL, '1', '邻水宅基地项目现场开支20210101-0208（39天）', 59, NULL, '年前开支，40天费用。', NULL, '2021-01-15', 22755.00, 22755.00, '已核。', 13, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-19', '2021-01-22', '2021-01-27', NULL, NULL, '2021-01-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418854560247', '1648881418994712578', '0', NULL, 102, 112, '2021年01月项目开支费用。', NULL, '2021-01-15', 41230.00, 41230.00, NULL, 101, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-15', '2021-01-28', '2021-01-28', NULL, NULL, '2021-01-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418854570248', NULL, '1', '编制《四川省旅游资源保护与利用指南》关于“五大经济区旅游产品发展方向及旅游资源开发条件评价研究”的合', 15, 105, NULL, NULL, '2021-01-18', 72250.00, 72250.00, '同意', 15, NULL, 7, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-18', '2021-01-19', '2021-01-19', NULL, NULL, '2021-01-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418854580249', '1648881416603959298', '0', NULL, 83, 111, NULL, NULL, '2021-01-21', 36000.00, 36000.00, '同意。', 83, '项目已开始，建议同意借支并及时支付。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-21', '2021-01-21', '2021-01-27', NULL, NULL, '2021-01-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418854590250', NULL, '1', '技术咨询费', 14, 106, '圣柏利（上海）企业管理服务有限公司\n开户行：中国银行上海市松江支行营业部\n账   号：457277800661', NULL, '2021-01-21', 11700.00, 11700.00, NULL, 14, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-21', '2021-01-21', '2021-01-21', NULL, NULL, '2021-01-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418854600251', '1648881416721399809', '0', NULL, 61, 111, '1、借款周期为本阶段外业数据采集；\n2、后期根据需要，二次进场再申请借款；', NULL, '2021-01-20', 5000.00, 5000.00, '建议同意借款', 61, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-21', '2021-01-23', '2021-01-27', NULL, NULL, '2021-01-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418854610252', '1648881416759148545', '0', NULL, 61, 111, '预计3人（含司机），工期5天；', NULL, '2021-01-21', 4000.00, 4000.00, '建议借款', 61, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-21', '2021-01-22', '2021-01-27', NULL, NULL, '2021-01-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418854620253', NULL, '1', '中国地理信息产业协会2021年团体会员单位会费', 48, 109, '开户名称：中国地理信息产业协会；   \n开户银行：中国银行北京分行营业部；  \n银行账号：7111010195700004701', NULL, '2021-01-22', 5000.00, 5000.00, '同意', 46, '同意。', 9, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-22', '2021-01-22', '2021-01-27', NULL, NULL, '2021-01-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418854630254', '1648881419607080962', '0', NULL, 113, NULL, '邀请市局指导验收相关费用，共计10000元整。', NULL, '2021-01-25', 10000.00, 10000.00, '已核。', 13, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-25', '2021-01-27', '2021-01-27', NULL, NULL, '2021-01-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418854640255', '1648881418214572034', '0', NULL, 138, NULL, '以上明细为2021年1月新增测绘内容现场开支。', NULL, '2021-01-25', 2500.00, 2500.00, '已核。', 13, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-25', '2021-01-27', '2021-01-27', NULL, NULL, '2021-01-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418854650256', '1648881418810163201', '0', NULL, 101, 112, '该费用2021年1月份的生产经费。项目成本已向分管领导说明。', NULL, '2021-01-26', 45500.00, 45500.00, NULL, 101, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-26', '2021-01-27', '2021-01-27', NULL, NULL, '2021-01-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418854660257', '1648881416499101698', '0', NULL, 61, 111, '1、按3人、8天（含进出场）预算；\n2、其他包含行李托运、核酸检测及其他不可预见费用；', NULL, '2021-01-27', 18500.00, 18500.00, '建议借款', 61, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-27', '2021-01-27', '2021-01-27', NULL, NULL, '2021-01-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418854670258', NULL, '1', '业务洽谈', 21, 105, '邻水县农业局。邻水县国土局。华蓥市建设局业务洽谈', NULL, '2021-01-27', 6000.00, 6000.00, '同意', 15, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-27', '2021-01-27', '2021-01-27', NULL, NULL, '2021-01-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418854680259', '1648881418994712578', '0', NULL, 102, 112, '2020年09月成本费用，增加便道维护费用和退向星星押金。', NULL, '2020-09-24', 65730.00, 65730.00, '借款费用情况属实', 101, '建议同意借支。', 10, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-25', '2020-10-10', '2020-10-12', NULL, NULL, '2020-10-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418854690260', '1648881417954525186', '0', NULL, 138, NULL, '项目开展所需的交通、生活开支、工作协调等相关费用，以及现目前无法预知费用。', NULL, '2020-09-26', 20000.00, 10000.00, '已核，建议暂按10000.00元借支。', 13, NULL, 7, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-30', '2020-10-12', '2020-10-12', NULL, NULL, '2020-10-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418854700261', '1648881417971302402', '0', NULL, 101, 112, '该成本为项目外业10月份的成本开销。', NULL, '2020-10-10', 30000.00, 25000.00, NULL, 101, '建议同意借支。', 10, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-10-10', '2020-10-12', '2020-10-12', NULL, NULL, '2020-10-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418854710262', NULL, '1', '车辆燃油费及保险费用', 16, 200, NULL, NULL, '2020-12-21', 20000.00, 20000.00, '同意', 142, '同意', 2, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-21', '2020-12-21', '2020-12-21', NULL, NULL, '2020-12-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418854720263', '1648881419619663874', '0', NULL, 39, 108, '罗江部分区域，5个村外业精灵4环绕飞行，约3000户，按1天100户计算，预计需要30天', NULL, '2020-12-07', 9000.00, 9000.00, NULL, 39, '同意', 11, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-07', '2020-12-07', '2020-12-10', NULL, NULL, '2020-12-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418854730264', '1648881417954525186', '0', NULL, 138, NULL, '此项目前期已经借款1万元，由于藏区开销较大，项目工期长，现场开销已经超出借款金额。目前项目又新增17公里左右护岸工程，需要第二次进场工作，因而需再借一笔款。', NULL, '2020-12-11', 5000.00, 3000.00, '已核，暂按3000元借支。', 13, NULL, 7, 2, '同意上述意见。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-16', '2020-12-17', '2020-12-21', NULL, NULL, '2020-12-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418854740265', '1648881420211060738', '0', NULL, 61, 111, '1、目前现场就一人开展工作，预计工期40天；\n2、租车单价含油钱，预计租用30天；\n3、界桩界牌制作安装费用为已确定价格；\n4、其他包含民工保险、千寻账号费用、模具运费及前期已经垫付费用；', NULL, '2020-12-10', 131000.00, 131000.00, '建议借款', 61, '建议同意借支。界桩埋设结束，即项目工作完成。', 10, 2, '同意上述意见。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-11', '2020-12-24', '2020-12-28', NULL, NULL, '2021-01-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418854750266', '1648881418273292290', '0', NULL, 83, 111, '暂按2人/1月工期计算，若有其它项目人员返回则补充入本项目。', NULL, '2020-12-11', 15000.00, 11430.00, '同意。', 83, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-12-11', '2020-12-24', '2020-12-28', NULL, NULL, '2020-12-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418854760267', NULL, '1', '乡镇界线划定 乡村规划', 21, 105, '乡镇界线划定 乡村规划', NULL, '2020-08-17', 8000.00, 8000.00, '同意', 15, NULL, 7, 2, '同意，请备注用途“杨俊开成本票的税款”', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-17', '2020-08-19', '2020-08-26', NULL, NULL, '2020-08-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418854770268', '1648881418290069506', '0', NULL, 83, 111, '因朋曲测区正值旅游旺季，现场用餐、住宿成本已超过预期，故再次申请借款。', NULL, '2020-08-17', 20000.00, 20000.00, '同意借款。', 83, '建议借支', 10, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-18', '2020-08-21', '2020-08-26', NULL, NULL, '2020-08-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418854780269', '1648881418994712578', '0', NULL, 102, 112, '8月工地支出', NULL, '2020-08-25', 66520.00, 66520.00, '同意。', 101, '较之前月份，增加了二滩季度观测和金龙山季度观测。\n建议同意借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-08-25', '2020-08-27', '2020-09-02', NULL, NULL, '2020-09-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418854790270', NULL, '1', '中国科学家论坛创新中国中国战略会员会费', 47, NULL, '参加2020年第十七届中国科学家论坛会议', NULL, '2020-09-07', 12800.00, 0.00, '已核。', 13, NULL, 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-07', '2020-09-07', '2020-09-07', NULL, NULL, '2020-09-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418854800271', NULL, '1', '2020测绘技术交流会保险费用', 8, 104, NULL, NULL, '2020-09-11', 1350.00, 1350.00, '同意。', 142, '同意', 2, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-09-14', '2020-09-15', '2020-09-15', NULL, NULL, '2020-09-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418854810272', NULL, '1', '车辆保险费', 16, 200, NULL, NULL, '2020-09-21', 20000.00, 20000.00, '同意。', 142, '同意', 2, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-02', '2020-11-03', '2020-11-03', NULL, NULL, '2020-11-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418854820273', '1648881418239737858', '0', NULL, 33, 110, '说明：1项和2项说明-公司和学习签订的包吃包住的实习合同，650元是餐补。其余工作是按照折算后的绩效结算。3项和4项说明-外业修补测工作用时长，采用租房子的方式减少住宿成本，其他的是正常用餐成本。', NULL, '2020-11-03', 13600.00, 13600.00, '同意', 33, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-03', '2020-11-03', '2020-11-03', NULL, NULL, '2020-11-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418854830274', NULL, '1', '惠州项目担保费', 14, 106, '开户名：成都中小企业融资担保有限责任公司\n开户行：成都银行体育场路支行\n担保费账号：3002 2010 2186 1150 0012', NULL, '2020-11-09', 10000.00, 10000.00, NULL, 14, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-09', '2020-11-09', '2020-11-09', NULL, NULL, '2020-11-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418854840275', '1648881417887416322', '0', NULL, NULL, 107, NULL, NULL, '2020-11-17', 8500.00, 8500.00, NULL, NULL, NULL, 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2020-11-17', '2020-11-17', '2020-11-19', NULL, NULL, '2020-11-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418854850276', NULL, '1', '职称证书办理费用', 9, 102, NULL, NULL, '2021-04-15', 10000.00, 10000.00, NULL, NULL, '建议同意借支。', 10, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, NULL, '2021-04-15', '2021-04-16', NULL, NULL, '2021-04-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418854860277', '1648881416197111809', '0', NULL, 83, 111, '以上费用为7人/月的现场开支预算。', NULL, '2021-04-15', 60000.00, 60000.00, '同意。', 83, '建议同意借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-15', '2021-04-15', '2021-04-16', NULL, NULL, '2021-04-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418854870278', '1648881416029339649', '0', NULL, 61, 111, '1、根据项目安排，可能需要现场支付吃住成本，金额为预算。\n2、借款含马尔康断面测量；\n3、绰斯甲预计工天20天、马尔康预计工天5天；\n4、除委外人员，绰斯甲1人参与，马尔康断面预计2人参与；\n5、车辆成本为马尔康水下进出场成本；', NULL, '2021-04-20', 6000.00, 6000.00, '已核，建议借款', 61, '绰斯甲、双江口两个项目统一借支。\n建议同意借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-20', '2021-04-21', '2021-04-23', NULL, NULL, '2021-04-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418854880279', '1648881415979008002', '0', NULL, 101, 112, '本项目工期预计12天，食宿预计一天500元，共计6000元。', NULL, '2021-04-22', 15000.00, 15000.00, NULL, 101, '建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-22', '2021-04-27', '2021-04-30', NULL, NULL, '2021-04-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418854890280', NULL, '1', '喜德县自然资源局存量林权登记数据整合项目', 23, 105, NULL, NULL, '2021-05-14', 48888.00, 48888.00, '已核，拟同意。', 13, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-17', '2021-05-17', '2021-05-19', NULL, NULL, '2021-05-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418854900281', NULL, '1', '备用金', 14, 106, NULL, NULL, '2021-06-07', 30000.00, 30000.00, NULL, 14, '同意', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-07', '2021-06-07', '2021-06-07', NULL, NULL, '2021-06-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418854910282', NULL, '1', '成都高新技术产业开发区发展改革和规划管理局成都高新区地下管线普查成果更新服务采购项目', 23, 105, NULL, NULL, '2021-06-08', 61400.00, 61400.00, '已核，情况属实。', 13, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-08', '2021-06-09', '2021-06-10', NULL, NULL, '2021-06-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418854920283', '1648881415668629506', '0', NULL, 61, 111, '1、安排人员4人（含驾驶员）；\n2、计划工期7天（含进出场）；', NULL, '2021-06-08', 5500.00, 5500.00, '建议借款，人员计划6月9日进场，请领导尽快审批。', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-08', '2021-06-09', '2021-06-10', NULL, NULL, '2021-06-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418854930284', NULL, '1', '担保公司担保费', 14, 106, '中小担保公司担保费用2%，800万*2%=16万，申请了9折既144000', NULL, '2021-06-10', 144000.00, 144000.00, NULL, 14, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-10', '2021-06-10', '2021-06-10', NULL, NULL, '2021-06-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418854940285', NULL, '1', 'YX项目地形图测绘外业检查', 55, 109, '2人', NULL, '2021-06-12', 10280.00, 10280.00, '同意。', 46, '同意。', 9, 2, '同意 拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-12', '2021-06-15', '2021-06-15', NULL, NULL, '2021-06-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418854950286', NULL, '1', '投标专用', 23, 105, NULL, NULL, '2021-02-03', 20000.00, 20000.00, '同意', 15, NULL, 7, 2, '同意，尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-02-03', '2021-02-03', '2021-02-08', NULL, NULL, '2021-03-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418854960287', NULL, '1', '邛崃市地下管线普查成果更新探测服务项目中标服务费', 23, 105, '收款单位：四川今晗建设咨询有限公司\n开 户 行：成都银行股份有限公司红牌楼支行\n账  号：1001300000676709\n联 系 人：宋女士\n联系电话：028-67195616', NULL, '2021-03-01', 25000.00, 25000.00, '同意', 15, NULL, 7, 2, '同意借支。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-01', '2021-03-02', '2021-03-04', NULL, NULL, '2021-03-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418854970288', NULL, '1', '光纤费用', 148, 104, '支付2021.04-2021.09光纤费用。转账信息---收款人：中国移动通信集团四川有限公司成都分公司；账号：4402209009005411951；开户行：中国工商银行春熙路支行。', NULL, '2021-03-03', 1800.00, 1800.00, '同意。', 112, '同意上述预算。', 2, 2, '可以支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-05', '2021-03-08', '2021-03-08', NULL, NULL, '2021-03-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418854980289', NULL, '1', '网站招聘服务合同', 8, 104, '续费智联招聘服务合同', NULL, '2021-03-04', 5680.00, 5680.00, '同意。', 112, NULL, 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-04', '2021-03-05', '2021-03-05', NULL, NULL, '2021-03-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418854990290', '1648881421402243074', '0', NULL, 61, 111, '本次借款主要是岸线规划专家评审费用；', NULL, '2021-05-26', 4500.00, 4500.00, '建议借款，评审会定在5月27日，望领导尽快审核批准为谢。', 61, '吴凯、昝鹏等前往雅安市参与岸线规划评审。建议同意借支。', 10, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-26', '2021-05-26', '2021-05-26', NULL, NULL, '2021-05-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418855000291', '1648881419607080962', '0', NULL, 113, NULL, '南江房地一体项目按照月底计划于七月初完成项目，根据生产生活需要特向公司申请生产生活费用。人员成本为本年3月份两名实习生薪水，实习时间共计108个工天，共计8640元；用工成本为后期档案整理，预计为4000元；住宿成本为房租，计划租房半年，费用为5000元；项目部7个月光纤费用600元；水、气费用每月200元，共计1400；审查成本为4月至5月共外业检查30天，平均每天用餐，其他费用合计600元，30天共计18000元；用餐成本为每人每天60元，1月初至7月初共计810个工天，共计48600元；车辆成本为3个月，平均每个月7220元（包含每个月租车费4500元，油费2000元，过路费720元），共计21660元。综上所述，本次借款共计108000元。', NULL, '2021-06-19', 108000.00, 108000.00, '同意', 142, NULL, 7, 2, '同意上述意见，合理支配。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-21', '2021-06-21', '2021-06-21', NULL, NULL, '2021-06-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418855010292', '1648881415630880769', '0', NULL, 61, 111, '1、预计工天7天；\n2、安排人员3人（含驾驶员）', NULL, '2021-06-24', 4500.00, 4500.00, '建议借款', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-24', '2021-06-25', '2021-06-25', NULL, NULL, '2021-06-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418855020293', '1648881418881466369', '0', NULL, 21, 105, '该项目8条河流加新增3条河流，共11条河流最终评审验收', NULL, '2021-06-25', 16000.00, 16000.00, '同意支付', 13, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-25', '2021-06-25', '2021-06-26', NULL, NULL, '2021-06-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418855030294', NULL, '1', '邻水宅基地项目现场开支2021年6月', 59, NULL, '为接收赵云资料，在九龙镇新租仓库半年。', NULL, '2021-06-27', 43200.00, 43200.00, '同意。', 142, NULL, 7, 2, '同意拨付，尽快把生产费用和生产工期落实。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-01', '2021-07-01', '2021-07-02', NULL, NULL, '2021-07-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418855040295', '1648881417077915649', '0', NULL, 11, 102, NULL, NULL, '2021-06-28', 50000.00, 50000.00, NULL, NULL, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, NULL, '2021-06-28', '2021-06-29', NULL, NULL, '2021-06-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418855050296', '1648881415588937730', '0', NULL, 61, 111, '1、项目人员已经进场；\n2、已进场人员4人，含驾驶员；\n3、先按4人、30天借款，后续根据实际情况增补。', NULL, '2021-06-28', 30000.00, 30000.00, '建议借款', 61, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-28', '2021-06-30', '2021-07-02', NULL, NULL, '2021-07-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418855060297', '1648881418810163201', '0', NULL, 101, 112, '6月中旬项目所在地频降大雨，业主营地后边坡以及附近村民公路出现一定程度的滑移和变形，受业主委托，在该两处部位新增监测设施，在目前雨季阶段进行连续观测。本次新增监测设施埋设土建成本。与甲方的费用按照合同变更申报流程处理。', NULL, '2021-06-29', 24000.00, 24000.00, NULL, 101, '建议结算。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-29', '2021-06-30', '2021-07-02', NULL, NULL, '2021-07-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418855070298', NULL, '1', '北斗华测导航无人机购买预付款', 112, 104, '转账信息如下：\n开户行：招行成都金牛万达广场支行\n账号：128908250710802', NULL, '2021-06-29', 240000.00, 240000.00, '同意。', 112, '同意', 2, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-29', '2021-06-29', '2021-06-29', NULL, NULL, '2021-06-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418855080299', NULL, '1', '备用金', 112, 104, '需要重新申请备用金。', NULL, '2021-06-29', 20000.00, 20000.00, '同意。', 112, '同意', 2, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-29', '2021-06-29', '2021-06-29', NULL, NULL, '2021-06-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418855090300', NULL, '1', '党建借款', 8, 104, NULL, NULL, '2021-06-30', 20000.00, 20000.00, '同意。', 112, '同意', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-30', '2021-07-02', '2021-07-02', NULL, NULL, '2021-07-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418855100301', '1648881416163557378', '0', NULL, 83, 111, NULL, NULL, '2021-03-23', 5000.00, 5000.00, '同意。', 83, '建议同意借支。', 10, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-23', '2021-03-25', '2021-03-25', NULL, NULL, '2021-03-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418855110302', NULL, '1', '申请支付泸县2020年度国土变更调查项目中标代理服务费', 22, 105, '参照《招标代理服务收费管理暂行办法》（计价格【2002】 1980号）收费标准按预算金额的1.5%计算收取，由成交供应商在领取成交通知书时向代理机构支付。\n代理机构信息如下：\n单位名称:四川巨伦工程项目管理有限公司,\n开户行:中国农业银行股份有限公司泸州金山路分理处\n帐号: 22170701040004282。\n申请财务部按照上述银行账户信息支付本项目的中标代理服务费21000元。谢谢！', NULL, '2021-03-23', 21000.00, 21000.00, '已核，情况属实，请领导审批。', 13, NULL, 7, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-23', '2021-03-24', '2021-03-25', NULL, NULL, '2021-03-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418855120303', '1648881416641708034', '0', NULL, 101, 112, '本费用为2021年3月份生产经费，除猴子岩监测以外，新增了多处地方地形图测绘。', NULL, '2021-03-23', 21800.00, 21800.00, NULL, 101, '建议同意借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-23', '2021-03-26', '2021-04-06', NULL, NULL, '2021-04-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418855130304', '1648881416146780162', '0', NULL, 61, 111, '1、预算工期30天；\n2、三人（含司机）一车；', NULL, '2021-03-31', 20000.00, 20000.00, '建议借款', 61, '借款为南涧-云县、屏边-河口两个项目现场开支，不再另外借款。\n建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-31', '2021-04-02', '2021-04-06', NULL, NULL, '2021-04-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418855140305', '1648881415932870657', '0', NULL, 61, 111, '1、业主要求现场吃住自己负责，申请借款；\n2、预计工期7天、现场1人配合；', NULL, '2021-04-20', 1700.00, 1700.00, '已核，建议借款', 61, '建议同意借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-20', '2021-04-21', '2021-04-23', NULL, NULL, '2021-04-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418855150306', '1648881416578793474', '0', NULL, 102, 112, NULL, NULL, '2021-04-22', 42080.00, 39580.00, NULL, 101, '建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-22', '2021-04-27', '2021-04-30', NULL, NULL, '2021-04-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418855160307', NULL, '1', '彭州市地下管线普查成果更新探测服务项目中标服务费', 23, 105, '收取方式：中标供应商在领取中标通知书前向招标代理机构一次性支付。\n收款单位：四川惠创地招标代理有限公司；\n开户行：成都银行股份有限公司南城支行；\n银行账号：1001300000710451\n备注：彭州市地下管线普查成果更新探测服务项目中标服务费', NULL, '2021-04-23', 21400.00, 21400.00, '已核。', 13, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-23', '2021-04-28', '2021-04-28', NULL, NULL, '2021-04-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418855170308', '1648881416641708034', '0', NULL, 101, 112, '本费用支付为猴子岩监测项目2021年4月份现场工作成本支出。', NULL, '2021-04-30', 14500.00, 14500.00, '现场成本支出均为实际支出。', 101, '建议同意借支。', 10, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-03', '2021-05-06', '2021-05-07', NULL, NULL, '2021-05-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418855180309', '1648881416197111809', '0', NULL, 83, 111, '以上为项目组11人/月的现场开支费用。因部分同志已参与本项目70天以上且剩余工作量仍较多，考虑分批进行轮休。', NULL, '2021-06-08', 90000.00, 90000.00, '同意。', 83, '建议同意借支。', 10, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-08', '2021-06-09', '2021-06-10', NULL, NULL, '2021-06-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418855190310', NULL, '1', '报考AOPA无人机驾驶证', 35, 107, NULL, NULL, '2021-06-15', 9000.00, 9000.00, '同意', 32, '同意', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-15', '2021-06-28', '2021-06-28', NULL, NULL, '2021-06-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418855200311', NULL, '1', '报考AOPA无人机驾驶证', 34, 107, '朱倪强培训费', NULL, '2021-06-15', 9000.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418855210312', '1648881418881466369', '0', NULL, 21, 105, '在8条河流基础上新增的上白水河、中白水河两条河、石坝河三条河流评审', NULL, '2021-06-20', 10000.00, 10000.00, '已核，拟同意。', 13, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-21', '2021-06-21', '2021-06-21', NULL, NULL, '2021-06-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418855220313', NULL, '1', '新增意外保险人员2人', 8, 104, '公司名称：泰康养老保险股份有限公司四川分公司\n开户行：中国工商银行成都盐市口支行\n账号：4402 9020 1910 0185 385', NULL, '2021-06-24', 1375.20, 1375.20, '同意。', 112, '同意。', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-25', '2021-06-25', '2021-06-25', NULL, NULL, '2021-06-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418855230314', '1648881417077915649', '0', NULL, NULL, 107, NULL, NULL, '2021-03-09', 18000.00, 18000.00, '同意', NULL, '8人外业工作约1个月，开展总额预算合理，建议借支。', 10, 2, '同意上述意见', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-09', '2021-03-10', '2021-03-10', NULL, NULL, '2021-03-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418855240315', '1648881416213889025', '0', NULL, 83, 111, '以上费用为4人/1月现场开支费用。', NULL, '2021-03-19', 100000.00, 100000.00, '同意。', 83, '50000元为枢纽区影像收集费用（杨卫代付）。\n建议同意借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-19', '2021-03-19', '2021-03-25', NULL, NULL, '2021-03-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418855250316', NULL, '1', '备用金', 112, 104, '备用金', NULL, '2021-03-17', 20000.00, 20000.00, '同意。', 112, '合理安排资金用途。', 2, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-17', '2021-03-19', '2021-03-19', NULL, NULL, '2021-03-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418855260317', NULL, '1', '备用金', 112, 104, '备用金', NULL, '2021-04-02', 20000.00, 20000.00, '同意。', 112, '合理使用', 2, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-02', '2021-04-06', '2021-04-06', NULL, NULL, '2021-04-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418855270318', '1648881416260026369', '0', NULL, 101, 112, '1、康定三道桥、水桥、牛棚子等移民点地形图测绘，现场4人，作业时间19天，共计开销11326元（均由杨晶实际发生）\n2、溪洛渡天星坝施工控制网建标及观测，土建费预估为6000元，生活食宿及杂物购买6000元。共计12000元。', NULL, '2021-04-15', 23326.00, 11326.00, NULL, 101, '建议同意借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-15', '2021-04-19', '2021-04-19', NULL, NULL, '2021-04-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418855280319', '1648881415949647874', '0', NULL, 83, 111, '该项目预估工期为两个月，按两月申请借款。', NULL, '2021-04-26', 30000.00, 15000.00, '同意。', 83, '本次同意借支15000元，后续按实际需要借支。', 10, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-27', '2021-05-11', '2021-05-14', NULL, NULL, '2021-05-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418855290320', NULL, '0', NULL, 52, 109, '2021年成都市不动产协会团体会员会费', NULL, '2021-04-29', 2000.00, 2000.00, '为实际支出，同意。', 46, '同意。', 9, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-29', '2021-05-06', '2021-05-07', NULL, NULL, '2021-05-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418855300321', '1648881416130002945', '0', NULL, 61, 111, '1、本次借款为补充借款；\n2、预计工期还需10天。', NULL, '2021-05-05', 5000.00, 5000.00, '建议借款', 61, '建议同意借支。', 10, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-05', '2021-05-06', '2021-05-07', NULL, NULL, '2021-05-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418855310322', '1648881416197111809', '0', NULL, 83, 111, '以上费用为现场9人/1月的开支费用，', NULL, '2021-05-11', 60000.00, 60000.00, '同意。', 83, '建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-11', '2021-05-17', '2021-05-19', NULL, NULL, '2021-05-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418855320323', NULL, '1', '邻水宅基地项目现场开支2021年5月', 59, NULL, '由于4月邻水抽调6人到泸县项目作业一个月，5月的人员餐费计6人，车辆计1辆。', NULL, '2021-05-12', 38800.00, 38800.00, '同意', 142, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-17', '2021-05-17', '2021-05-19', NULL, NULL, '2021-05-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418855330324', '1648881418239737858', '0', NULL, 59, NULL, '4月邻水6人1车到泸县作业一个月，未借款计入本月补借', NULL, '2021-05-12', 24000.00, 24000.00, '同意。', 142, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-17', '2021-05-17', '2021-05-19', NULL, NULL, '2021-06-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418855340325', '1648881415895121921', '0', NULL, 61, 111, '1、项目已经委外；\n2、部门委派人员进行现场管理和检查可能产生的成本预算；', NULL, '2021-05-18', 3000.00, 3000.00, '建议借款。', 61, '建议借支。', 10, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-18', '2021-05-31', '2021-05-31', NULL, NULL, '2021-06-01');
INSERT INTO `cmc_borrow` VALUES ('1648881418855350326', '1648881415949647874', '0', NULL, 83, 111, NULL, NULL, '2021-05-24', 10000.00, 10000.00, '根据项目实际需要申请。', 83, '建议同意借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-24', '2021-06-09', '2021-06-10', NULL, NULL, '2021-06-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418855360327', NULL, '1', '农经权项目借款2021年（第一次）', 59, NULL, NULL, NULL, '2021-05-31', 18063.00, 18063.00, '同意', 142, NULL, 7, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-01', '2021-06-02', '2021-06-03', NULL, NULL, '2021-06-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418855370328', NULL, '1', '资质维护。', 112, 104, '收款账户\n户名：杨康\n账号：6226192013690797\n开户行：民生银行成都分行', NULL, '2021-05-31', 50000.00, 50000.00, '同意。', 112, '预算内资金，可以支付。', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-31', '2021-05-31', '2021-05-31', NULL, NULL, '2021-05-31');
INSERT INTO `cmc_borrow` VALUES ('1648881418855380329', '1648881415949647874', '0', NULL, 83, 111, NULL, NULL, '2021-08-13', 5000.00, 5000.00, '同意。', 83, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-13', '2021-08-16', '2021-08-24', NULL, NULL, '2021-08-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418855390330', NULL, '1', '公司购买大通汽车需要支付定金', 112, 104, ' 东创建国汽车集团成都天弘车业有限公司\n账号：     22 8088 0104 0025 129 \n开户行：   中国农行银行成都高新支行\n转账，谢谢！', NULL, '2021-07-15', 10000.00, 10000.00, '同意。', 112, '同意', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-15', '2021-07-16', '2021-07-16', NULL, NULL, '2021-07-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418855400331', NULL, '1', ' 北京中大华远认证中心信息体系认证费用', 52, 109, '收款单位：北京中大华远认证中心四川分中心 \n开户银行：中信银行股份有限公司成都武侯支行 \n账 号：7413310182600013961', NULL, '2021-07-30', 15000.00, 15000.00, '同意，情况属实。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-30', '2021-07-30', '2021-08-04', NULL, NULL, '2021-08-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418855410332', '1648881416377466882', '0', NULL, 138, NULL, '用于此次项目本人与科研所相关人员的食宿等相关费用', NULL, '2021-03-06', 15000.00, 15000.00, '同意。', 142, NULL, 7, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-08', '2021-03-11', '2021-03-16', NULL, NULL, '2021-03-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418855420333', NULL, '1', '四川省测绘地理信息学会2021年会费', 52, 109, '开户名称：四川省测绘地理信息学会\n开户行：中国银行成都银都支行\n账户：1306 5874 9641\n联系电话 028-66065616', NULL, '2021-03-10', 13000.00, 13000.00, '为实际支出，同意。', 46, '同意。', 9, 2, '尽快转账支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-10', '2021-03-10', '2021-03-16', NULL, NULL, '2021-03-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418855430334', '1648881416411021314', '0', NULL, 61, 111, '1、本次借款为XR、雅江、阿尼桥、汉密四个项目的共用补充借款；\n2、前期借款预算30天工期，补充借款30天工期；', NULL, '2021-03-26', 46000.00, 46000.00, '建议借款', 61, '建议同意借支。', 10, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-26', '2021-03-29', '2021-04-07', NULL, NULL, '2021-04-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418855440335', NULL, '0', NULL, 52, 109, '2021年度水利水电测绘信息网网费', NULL, '2021-05-14', 3000.00, 3000.00, '同意。', 46, '同意。', 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-20', '2021-05-20', '2021-05-24', NULL, NULL, '2021-05-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418855450336', NULL, '1', '猴子岩水电站2021年竣工结算税金', 101, 112, '猴子岩水电站外观监测项目合同竣工结算金额2777667.60元，需在地方国税局缴纳5%左右税金。本月开税票至甲方，预计下月中下旬收款。', NULL, '2021-05-17', 140000.00, 140000.00, NULL, 101, '建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-17', '2021-05-17', '2021-05-19', NULL, NULL, '2021-05-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418855460337', '1648881415815430146', '0', NULL, 138, NULL, '用于本项目的，耗材、日常生活、生产等开支。', NULL, '2021-06-15', 50000.00, 50000.00, '同意借款！建议合理节约使用。', 20, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-16', '2021-06-16', '2021-06-21', NULL, NULL, '2021-06-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418855470338', NULL, '1', '车辆燃油费及保险费用', 16, 104, NULL, NULL, '2021-06-16', 20000.00, 20000.00, '同意。', 112, '合理支配。', 2, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-16', '2021-06-21', '2021-06-21', NULL, NULL, '2021-06-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418855480339', '1648881418881466369', '0', NULL, 21, 105, '在8条河流基础上新增的上白水河、中白水河、石坝河三条河流（石坝河为小西河支流）', NULL, '2021-06-20', 105000.00, 50000.00, '已核，拟同意。', 13, '项目资料未通过正式验收，水文委外费用待核实，建议借支部分款项用于工作开展。\n建议借支。', 10, 2, '专款专用。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-21', '2021-07-05', '2021-07-06', NULL, NULL, '2021-07-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418855490340', '1648881417849667586', '0', NULL, 70, 110, '大邑农房项目项目成本', NULL, '2021-06-24', 4000.00, 4000.00, '情况属实，同意借款。', 83, '此项目之前无借款。建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-24', '2021-06-24', '2021-06-25', NULL, NULL, '2021-06-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418855500341', '1648881416578793474', '0', NULL, 102, 112, '6月项目开支，已减少地质人员工资。', NULL, '2021-06-24', 33104.00, 33104.00, NULL, 101, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-24', '2021-06-30', '2021-07-02', NULL, NULL, '2021-07-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418855510342', NULL, '1', '购买“ 蜀南气矿新、改建管道测绘服务采购项目”招标文件', 21, 105, '招标文件购买、投标保证金递交相关信息：\n\n账 户 名：中国石油物资有限公司西南分公司\n\n银行账号：5105 0142 6208 0000 2922\n\n开户行：中国建设银行股份有限公司成都第二支行\n\n开户行行号：1056 5100 2606\n备注：项目编号：ZY21-XN318-FW012+标书费', NULL, '2021-01-29', 300.00, 300.00, '同意', 15, '同意。', 9, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-29', '2021-01-29', '2021-01-29', NULL, NULL, '2021-01-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418855520343', NULL, '1', '成勘院项目投标专家评审费', 20, NULL, NULL, NULL, '2021-02-03', 20000.00, 20000.00, '情况属实，建议借支。', 13, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-02-03', '2021-02-03', '2021-02-08', NULL, NULL, '2021-02-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418855530344', NULL, '1', '泸县房地一体', 15, 105, NULL, NULL, '2021-02-03', 100000.00, 100000.00, '拟同意', 15, NULL, 7, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-02-03', '2021-02-03', '2021-02-03', NULL, NULL, '2021-02-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418855540345', NULL, '1', '烟台市福山区智造芯城项目测绘服务单位', 15, 105, '冲抵', NULL, '2021-03-01', 50000.00, 50000.00, '同意', 15, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-01', '2021-03-02', '2021-03-02', NULL, NULL, '2021-03-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418855550346', NULL, '1', '创办子公司前期经费', 15, 105, '子公司前期经费', NULL, '2021-03-01', 50000.00, 50000.00, '同意', 15, NULL, 7, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-03-01', '2021-03-02', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418855560347', NULL, '1', '甘孜州2020年河长制水生态保护河湖（19条州级河流及125个常年湖面面积1km2以下湖泊）管理范围划定项目履约', 22, 105, '本项目根据合同约定需要办理履约担保，本次担保费用2712元，转入账号：22575101040021405，账户名称：甘孜州中小企业融资担保有限责任公司，开户行：农行康定市支行。', NULL, '2021-03-02', 2712.00, 2712.00, '同意', 15, NULL, 7, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-02', '2021-03-02', '2021-03-02', NULL, NULL, '2021-03-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418855570348', '1648881416197111809', '0', NULL, 83, 111, '以上为开展机载激光测绘现场开支费用。', NULL, '2021-03-25', 80000.00, 59000.00, '同意。', 83, '建议同意借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-25', '2021-03-25', '2021-03-25', NULL, NULL, '2021-03-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418855580349', '1648881418239737858', '0', NULL, 59, NULL, NULL, NULL, '2021-03-03', 10000.00, 10000.00, '同意借款。', 142, NULL, 7, 2, '同意借支。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-04', '2021-03-04', '2021-03-04', NULL, NULL, '2021-03-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418855590350', '1648881416641708034', '0', NULL, 101, 112, '本费用明细已向分管领导进行了汇报。', NULL, '2021-03-05', 60000.00, 60000.00, NULL, 101, '情况已核实，建议同意借支。', 10, 2, '同意，尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-05', '2021-03-05', '2021-03-10', NULL, NULL, '2021-03-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418855600351', NULL, '1', '差旅费', 14, 106, '上海出差差旅费', NULL, '2021-03-09', 5000.00, 5000.00, NULL, 14, '须合理支配。', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-09', '2021-03-10', '2021-03-10', NULL, NULL, '2021-03-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418855610352', '1648881418239737858', '0', NULL, 59, NULL, '子公司5人开支暂由项目垫付，后期结算时抵扣', NULL, '2021-04-13', 28000.00, 28000.00, '此次借款费用是按5人30天来预算的，已核。', 142, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-14', '2021-04-14', '2021-04-14', NULL, NULL, '2021-04-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418855620353', '1648881418881466369', '0', NULL, 21, 105, '该项目已经完成前期工作，现需要制作安装界桩、界牌。时间节点为2021年6月底之前完成。该费用在当地现场询价核实后做出的预算。', NULL, '2021-04-16', 182880.00, 182880.00, '已核，在预算范围内，拟同意借支。', 13, '建议同意借支。', 10, 2, '本次借款，按需逐步拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-19', '2021-04-19', '2021-04-20', NULL, NULL, '2021-04-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418855630354', '1648881421276413954', '0', NULL, 61, 111, '1、本次为补充借款\n2、借款总额为现场预算差值；\n3、单价和数量为预设，保证借款总金额；', NULL, '2021-04-20', 6800.00, 6800.00, '借款金额已核，建议借款', 61, '项目外业结束，最后一次民工费借款。建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-20', '2021-04-25', '2021-04-30', NULL, NULL, '2021-04-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418855640355', NULL, '1', '2020年度全国国土变更调查成果国家级核查——招标文件购买费用', 24, 105, NULL, NULL, '2021-04-22', 500.00, 500.00, '已核，请领导批示。', 13, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-22', '2021-04-22', '2021-04-28', NULL, NULL, '2021-04-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418855650356', NULL, '1', '备用金', 112, 104, '备用金', NULL, '2021-04-30', 20000.00, 20000.00, '同意。', 112, '合理支配。', 2, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-30', '2021-04-30', '2021-04-30', NULL, NULL, '2021-04-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418855660357', '1648881416578793474', '0', NULL, 102, 112, '二月项目部开支。', NULL, '2021-02-22', 37580.00, 37580.00, '同意。', 101, '按2018年核准的项目预算，此项目每年预算成本494900元（含地质工程师，不含车辆开支），平均每月成本41242元。\n建议同意借支。', 10, 2, '上述意见已阅，同意该借款申请。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-02-22', '2021-02-22', '2021-02-24', NULL, NULL, '2021-03-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418855670358', NULL, '1', '值班车辆油费及保险费用', 16, 200, NULL, NULL, '2021-03-10', 20000.00, 20000.00, '同意。', 112, '计划使用', 2, 2, '安排支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-10', '2021-03-16', '2021-03-16', NULL, NULL, '2021-03-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418855680359', '1648881417400877057', '0', NULL, 39, 108, '按李总航飞设计，外业预计10天，目前外业只有3个人，考虑刺像控点还需要增加人员，目前先按照4人、10天作的借款预算。', NULL, '2021-03-16', 10035.00, 10035.00, '按照需求，同意借款', 39, '建议同意借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-16', '2021-03-19', '2021-03-19', NULL, NULL, '2021-03-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418855690360', '1648881416578793474', '0', NULL, 102, 112, '增加金龙山季度观测和二滩平面季度观测费用', NULL, '2021-03-21', 66440.00, 66440.00, '同意。请多与甲方进行沟通并尽快推动2020年的年报评审工作，对2020年资料及时进行归档。好办理2020年4季度与甲方的结算事宜。', 101, '建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-22', '2021-03-22', '2021-03-25', NULL, NULL, '2021-03-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418855700361', '1648881417400877057', '0', NULL, 39, 108, '由于现场时常有空军直升机飞行，担心安全问题，故而交由激光中心申请空域', NULL, '2021-03-23', 20000.00, 20000.00, '按公司要求和流程申请办理', 39, '建议借支。空域涉及机场、铁路，费用交之前偏高。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-23', '2021-03-23', '2021-03-25', NULL, NULL, '2021-03-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418855710362', '1648881418239737858', '0', NULL, 59, NULL, '4月借款', NULL, '2021-03-25', 10000.00, 10000.00, '同意', 142, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-29', '2021-03-31', '2021-04-06', NULL, NULL, '2021-04-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418855720363', NULL, '1', '邻水宅基地项目现场开支2021年4月', 59, NULL, '易地扶贫搬迁突击，临时用车（摩托车）较多', NULL, '2021-03-25', 56250.00, 56250.00, '同意。', 142, NULL, 7, 2, '合理安排资金用途，同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-29', '2021-03-31', '2021-04-09', NULL, NULL, '2021-04-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418855730364', '1648881419607080962', '0', NULL, 113, NULL, '本次借款用于项目后期打印费用和档案袋定制采购费用。其中档案袋采购55000个，单个金额0.8元，共计44000元，含税；打印费用预计53000户资料打印，每户11张纸，全部单面打印，单张价格0.11元，共计64130元。其中打印费用含资料整理，但开票需单独付3%的增值税发票钱。', NULL, '2021-03-26', 110053.90, 110053.90, '所有成本费用，同意。', 142, NULL, 7, 2, '须合理安排资金用途，同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-30', '2021-03-31', '2021-04-09', NULL, NULL, '2021-04-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418855740365', '1648881418881466369', '0', NULL, 21, 105, '增加的长白水河、中白水河、狮子口水库支流三条河流调绘工作', NULL, '2021-04-06', 11000.00, 11000.00, '已核，拟同意。', 13, '同意借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-06', '2021-04-06', '2021-04-07', NULL, NULL, '2021-04-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418855750366', NULL, '1', '投标专用', 23, 105, NULL, NULL, '2021-04-16', 20000.00, 20000.00, '已核，拟同意。', 13, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-19', '2021-04-28', '2021-05-07', NULL, NULL, '2021-05-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418855760367', '1648881415991590913', '0', NULL, 39, 108, NULL, NULL, '2021-04-20', 4000.00, 4000.00, '按照3人5天预算，请领导批准。', 39, '建议同意借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-20', '2021-04-20', '2021-04-23', NULL, NULL, '2021-04-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418855770368', NULL, '1', '实习生工作结算和购买软件', 33, 110, '朱姝2个月实习生工作结算和购买航天远景3D测图软件', NULL, '2021-04-20', 9081.00, 9081.00, '同意', 33, '建议同意。已有测图软件8套，新购7套，共计15套。', 10, 2, '同意拨付，实习生费用结算时冲抵，软件狗费用实报并由综合事务部登记好使用者和管理人。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-20', '2021-04-21', '2021-04-23', NULL, NULL, '2021-04-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418855780369', '1648881415962230785', '0', NULL, 61, 111, '1、现场开支包含交通分院5人；\n2、现场参与3人（含司机），预计工天10天；', NULL, '2021-04-20', 20000.00, 20000.00, '已核，建议借款。', 61, '同意借支。借支应包括甲方现场开支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-20', '2021-04-20', '2021-04-23', NULL, NULL, '2021-04-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418855790370', NULL, '1', '甘孜州2020年河长制水生态保护河湖管理范围划定项目中标服务费', 24, 105, '甘孜州2020年河长制水生态保护河湖管理范围划定项目中标服务费', NULL, '2021-01-29', 57035.00, 57035.00, '同意', 15, '同意。', 9, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-01-29', '2021-01-29', '2021-01-29', NULL, NULL, '2021-01-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418855800371', '1648881416427798530', '0', NULL, 61, 111, '1、按4人、30天预算；\n2、其他包括药品和生活用品；\n3、后期因工作需要再增加借款；', NULL, '2021-02-01', 90000.00, 90000.00, NULL, 61, '建议同意借支。卫片收集费用直接转账支付。\n公司名称：河南遥绘星维信息技术有限公司\n统一社会信用代码：91410105MA44P1LY9U\n单位地址：郑州市金水区文博东路28号 \n开户银行：中国民生银行股份有限公司郑州纬三路支行\n银行帐号：154822344', 10, 2, '同意，尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-02-01', '2021-02-01', '2021-02-01', NULL, NULL, '2021-02-01');
INSERT INTO `cmc_borrow` VALUES ('1648881418855810372', '1648881418239737858', '0', NULL, 33, 110, '泸县房地一体项目，外业现场生活费', NULL, '2021-02-02', 5000.00, 5000.00, '同意', 33, '建议同意借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-02-02', '2021-02-02', '2021-02-03', NULL, NULL, '2021-02-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418855820373', NULL, '1', '南涧至云县高速公路1：2000航测内业测图费用', 142, NULL, '项目费用支付', NULL, '2021-03-16', 24800.00, 24800.00, '同意', 142, NULL, 7, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-16', '2021-03-17', '2021-03-17', NULL, NULL, '2021-03-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418855830374', NULL, '1', '工时费预支', 61, 111, '王金浩离职，提前结算（预算）工时费。', NULL, '2021-04-30', 35401.00, 35401.00, '建议借支', 61, '建议同意。借款由测绘工程中心赵洪结算后，用王金浩的绩效冲抵。', 10, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-04-30', '2021-05-06', '2021-05-14', NULL, NULL, '2021-05-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418855840375', '1648881417887416322', '0', NULL, 55, 109, '重庆第二机场项目地形图检查、整改费用', NULL, '2021-04-30', 6600.00, 6600.00, '同意', 46, NULL, 9, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-10', '2021-05-14', '2021-05-14', NULL, NULL, '2021-05-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418855850376', '1648881415815430146', '0', NULL, 138, NULL, '用于本项目前期生产生活开支。', NULL, '2021-05-06', 50000.00, 50000.00, '同意', 142, NULL, 7, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-06', '2021-05-06', '2021-05-07', NULL, NULL, '2021-05-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418855860377', NULL, '1', '阿坝小金四姑娘山110kV输变电工程国土用地报件咨询服务中标服务费', 23, 105, NULL, NULL, '2021-05-07', 2226.00, 2226.00, '已核。', 13, NULL, 7, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-07', '2021-05-10', '2021-05-14', NULL, NULL, '2021-05-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418855870378', '1648881416935309313', '0', NULL, 61, 111, '1、人员成本包含4月进场已经产生成本约1800；', NULL, '2021-05-18', 8000.00, 8000.00, '建议借款', 61, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-18', '2021-05-19', '2021-05-19', NULL, NULL, '2021-05-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418855880379', NULL, '0', NULL, 47, 102, NULL, NULL, '2021-05-18', 10000.00, 10000.00, NULL, 142, NULL, 7, 2, '同意，由韶关分公司用项目款冲抵。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-18', '2021-05-19', '2021-05-19', NULL, NULL, '2021-05-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418855890380', NULL, '1', '重庆质检站送检费用:重庆市开州区移民新城供水项目(鲤鱼塘水库)泄洪河道及引水渠道综合治理工程', 50, 109, NULL, NULL, '2021-05-24', 2550.00, 2550.00, '同意。', 46, '同意。', 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-24', '2021-05-24', '2021-05-24', NULL, NULL, '2021-05-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418855900381', '1648881416578793474', '0', NULL, 102, 112, '五月项目成本开支，增加金龙山外观季度观测、二滩大坝平面季度观测费用。', NULL, '2021-05-24', 67940.00, 67940.00, '同意', 101, '建议同意借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-24', '2021-06-01', '2021-06-03', NULL, NULL, '2021-06-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418855910382', '1648881415727349761', '0', NULL, 61, 111, '按4人（含司机）、8天（含进出场）预算。', NULL, '2021-05-27', 7000.00, 7000.00, '建议借款，计划5月27日进场，望领导尽快审批。', 61, '建议同意借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-05-27', '2021-05-27', '2021-05-28', NULL, NULL, '2021-05-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418855920383', '1648881416641708034', '0', NULL, 101, 112, '本费用支付为猴子岩监测项目2021年5月份现场工作成本支出。   增加了康定三道桥钻孔放点、水桥补图的项目费用。', NULL, '2021-06-02', 17000.00, 17000.00, NULL, 101, '建议同意借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-02', '2021-06-07', '2021-06-10', NULL, NULL, '2021-06-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418855930384', NULL, '1', '邻水宅基地项目现场开支2021年5月第二次（补项）', 59, NULL, NULL, NULL, '2021-06-04', 23715.00, 23715.00, '同意。', 142, NULL, 7, 2, '合理使用生产成本，同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-11', '2021-06-15', '2021-06-15', NULL, NULL, '2021-06-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418855940385', '1648881418239737858', '0', NULL, 59, NULL, '4月-5月实习生结算工资', NULL, '2021-06-04', 7670.00, 7670.00, '3个实习生在泸县开展工作一个月的工资费用，同意。', 142, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-06-11', '2021-06-15', '2021-06-15', NULL, NULL, '2021-06-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418855950386', '1648881417887416322', '0', NULL, 11, 102, '其它成本为核酸检测、调绘工具、购买千寻账号等费用。后期外单位劳务人员日常费用等', NULL, '2021-02-20', 20000.00, 20000.00, NULL, NULL, '建议同意借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, NULL, '2021-02-20', '2021-02-20', NULL, NULL, '2021-02-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418855960387', NULL, '1', '华蓥市渠江画廊田园综合体地形测绘项目', 21, 105, '华蓥市渠江画廊田园综合体地形测绘项目商务成本', NULL, '2021-02-24', 20000.00, 20000.00, '拟同意', 15, NULL, 7, 2, '上述意见已阅，同意该借款申请。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-02-24', '2021-02-24', '2021-02-25', NULL, NULL, '2021-02-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418855970388', '1648881421276413954', '0', NULL, 61, 111, '1、参与人员2人，现场租车请民工；\n2、预计工天20天；', NULL, '2021-03-26', 87150.00, 83150.00, '建议借款', 61, '主要费用为界桩制作（青石桩）、告示牌制作、运输安装费用。\n建议同意借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-03-26', '2021-03-29', '2021-04-06', NULL, NULL, '2021-04-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418855980389', '1648881417077915649', '0', NULL, 11, 102, '项目验收', NULL, '2021-04-09', 20000.00, 20000.00, NULL, NULL, NULL, 7, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, NULL, '2021-04-09', '2021-04-12', NULL, NULL, '2021-04-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418855990390', '1648881414775242753', '0', NULL, 61, 111, '1、安排人员4人（含驾驶员）；\n2、预计工天15天，含进场及转场时间；\n3、其他成本主要是高原常备药品购买费用；', NULL, '2021-09-09', 16000.00, 16000.00, '建议借款', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-09', '2021-09-09', '2021-09-10', NULL, NULL, '2021-09-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418856000391', NULL, '1', '邻水宅基地项目2021年9月', 59, NULL, '自22号起，项目用餐人数实际为12人，折算到全月，计8人。', NULL, '2021-09-22', 46750.00, 46750.00, '同意', 142, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-24', '2021-09-24', '2021-09-26', NULL, NULL, '2021-09-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418856010392', NULL, '1', '2022年度人身意外伤害保险', 8, 104, '公司名称：泰康养老保险股份有限公司四川分公司\n开户行：中国工商银行成都盐市口支行\n账号：4402 9020 1910 0185 385', NULL, '2021-09-26', 164284.00, 164284.00, '同意。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-26', '2021-09-27', '2021-09-27', NULL, NULL, '2021-09-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418856020393', NULL, '1', '大疆无人机（M300RTK）年度保险（2021.9.28~2022.9.28）', 55, 109, '大疆无人机（M300RTK）年度保险（2021.9.28~2022.9.28）', NULL, '2021-09-29', 7695.00, 7695.00, '同意。', 50, '同意。', 9, 2, '同意拨付.', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-29', '2021-10-08', '2021-10-08', NULL, NULL, '2021-10-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418856030394', '1648881414527778817', '0', NULL, 83, 111, '1，该项目造标需要工人5人*预计工期7天、GNSS测量及水准测量需要工人5人，预计工期5天；', NULL, '2021-10-19', 30000.00, 30000.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-19', '2021-10-26', '2021-10-28', NULL, NULL, '2021-10-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418856040395', NULL, '1', '新增人员商业保险', 8, 104, '公司名称：泰康养老保险股份有限公司四川分公司\n开户行：中国工商银行成都盐市口支行\n账号：4402 9020 1910 0185 385', NULL, '2021-10-19', 340.80, 340.80, '同意。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-21', '2021-10-21', '2021-10-21', NULL, NULL, '2021-10-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418856050396', '1648881416641708034', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2021年10月份现场作业成本支出。', NULL, '2021-10-25', 16200.00, 16200.00, NULL, 101, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-25', '2021-10-26', '2021-10-28', NULL, NULL, '2021-10-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418856060397', NULL, '1', '邻水宅基地项目2021年10月', 59, NULL, NULL, NULL, '2021-11-03', 59800.00, 59800.00, '同意。', 142, NULL, 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-04', '2021-11-05', '2021-11-10', NULL, NULL, '2021-11-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418856070398', '1648881415815430146', '0', NULL, 138, NULL, '此次借款用处：\n1、重庆轨道交通四号线施工监测、三方监测、地下管网内窥项目日常生活开销、用车、项目人员部分工资、实习工资等开销7万元；\n2、重庆南坪地下管网内窥给予劳务外协队伍开展工作、生活费用10万元；\n3、重庆轨道交通4号线施工监测投标用款3万元。', NULL, '2021-11-12', 200000.00, 170000.00, '同意。', 142, '施工监测投标费用，我方未收款，暂缓支付', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-15', '2021-11-16', '2021-11-16', NULL, NULL, '2021-11-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418856080399', NULL, '1', '新增人员意外保险', 8, 104, '公司名称: 泰康养老保险股份有限公司四川分公司。\n开户行: 工商银行盐市口支行\n账号:4402 9020 1910 0185 385', NULL, '2021-11-15', 1098.20, 1098.20, '同意。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-16', '2021-11-16', '2021-11-16', NULL, NULL, '2021-11-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418856090400', '1648881414511001602', '0', NULL, 33, 110, '项目正常开销，住宿+油费+用餐费', NULL, '2021-11-16', 4095.00, 4095.00, '同意', 33, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-16', '2021-11-16', '2021-11-16', NULL, NULL, '2021-11-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418856100401', NULL, '1', '投标专用', 23, 105, NULL, NULL, '2021-11-17', 20000.00, 20000.00, '已核，拟同意。', 13, NULL, 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-17', '2021-11-22', '2021-11-23', NULL, NULL, '2021-11-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418856110402', NULL, '1', ' 四川省地理信息产业协会2021年度会费', 52, 109, '户名  四川省地理信息产业协会\n开户行   中信银行成都紫荆支行\n账号   8111 0010 1330 0013 443\n备注内容   会费', NULL, '2021-07-01', 20000.00, 20000.00, '同意。', 46, '同意。', 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-01', '2021-07-05', '2021-07-06', NULL, NULL, '2021-07-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418856120403', '1648881415475691522', '0', NULL, 32, 107, '项目人员已进场，先按4人20天借款，后续根据实际情况增补', NULL, '2021-07-13', 17400.00, 17400.00, NULL, 32, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-13', '2021-07-16', '2021-07-16', NULL, NULL, '2021-07-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418856130404', '1648881415026900993', '0', NULL, NULL, 108, '项目计划按15人，1个月费用', NULL, '2021-08-11', 46000.00, 46000.00, '按照正常计划，部门同意借支该费用。', 39, '已要求项目管理部尽快预算。建议借支。', 10, 2, '同意按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-11', '2021-08-12', '2021-08-13', NULL, NULL, '2021-08-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418856140405', NULL, '1', '备用金', 112, 104, '备用金用于商务接待', NULL, '2021-08-13', 20000.00, 20000.00, '同意。', 112, '同意', 2, 2, '同意拨付，须合理安排。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-13', '2021-08-18', '2021-08-18', NULL, NULL, '2021-08-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418856150406', '1648881415240810497', '0', NULL, 61, 102, '1、预计工期15天，我公司人员3人（含司机），其他开支为交通分院现场开支由我方负责费用。\n2、后期根据现场情况，如需要再补充借款。', NULL, '2021-08-14', 22000.00, 22000.00, '建议借款', 61, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-14', '2021-08-16', '2021-08-24', NULL, NULL, '2021-08-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418856160407', '1648881415047872514', '0', NULL, 83, 111, '旅游旺季、食宿成本较高。', NULL, '2021-08-16', 6500.00, 6500.00, NULL, 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-16', '2021-08-17', '2021-08-24', NULL, NULL, '2021-08-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418856170408', '1648881414880100353', '0', NULL, 61, 111, '1、项目探勘、数据采集、预演及正式演练，共4次进出场；\n2、探勘2人2天、数据采集预计4天、4人（含司机）、预演及正式演练共3次，每次3天、4人（含司机）；\n3、车辆成本按进出场1元/km、现场每次150元油费计算；\n4、其他成本是大疆设备商现场测试预计产生的费用；', NULL, '2021-08-25', 14000.00, 14000.00, '建议借款', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-25', '2021-08-25', '2021-08-26', NULL, NULL, '2021-08-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418856180409', NULL, '1', 'XC备用机三个月保险', 32, 101, '公司名称：中国人民财产保险股份有限公司沈阳市分公司\n纳税人识别号：91210100604724739C\n开户银行：中国工商银行沈阳市和平支行\n银行账号：3301003709231001846\n公司地址：沈阳市和平区云集街5甲3号\n联系电话：024-23237110\n是否为增值税一般纳税人：是\n是否需要开具增值税专用发票：是', NULL, '2021-09-16', 6300.00, 0.00, NULL, 32, NULL, 11, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-16', '2021-09-16', '2021-09-17', NULL, NULL, '2021-09-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418856190410', '1648881414926237697', '0', NULL, 61, 111, '1、商务费用：15000（实际费用约35000，刘媛媛已经借款20000）；\n2、XC25机组：4人,45天（人员方面：飞手及辅助人员共3人，租车驾驶员1人；工期方面：预计工期45天）；\n3、XC25机组租车：900元/天，按25天计算(单价含油费、因现场暂时有车，租车时间预计25天)；\n4、飞马飞行、像控及检查点：3人，20天（人员方面：飞手及辅助人员共2人，驾驶员1人；工期方面：飞马主要负责500区域飞行及边角、支沟补飞，预计工期20天）；\n5、激光点云检查点测量：3人，10天（人员方面：安排技术人员2人，驾驶员1人；工期方面：预计工期10天）；\n6、现场调绘及修补测：8人，50天（人员方面：预计安排调绘及修补测人员6人，公司驾驶员1人，租车驾驶员1人；工期方面：预计工期50天）\n7、现场调绘租车：900元/天，按30天计算(单价含油费，租车时间预计30天)；\n8、现场控制测量：4人，10天（人员方面：安排技术人员3人，驾驶员1人；工期方面：预计工期10天）；\n9、交通费：4人（飞行组1人、外业组3人，机票及机场往返交通费用按单程1600元/人次）；\n10、公司车辆油料费：200元/天，70天（目前项目有两个车，预计现场用公司车一共70天）；\n11、其他费用：2000（药品、防护用品级办公用品等', NULL, '2021-09-17', 215000.00, 215000.00, '建议借款', 61, '请测绘工程中心二部按月报预算，财务部按预算分期、按实际需要借支。\n同意。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-17', '2021-09-17', '2021-09-22', NULL, NULL, '2021-09-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418856200411', NULL, '1', '彭州市规划和自然资源局彭州市1：500系列数字测绘产品生产服务项目（第四包）', 23, 105, '包四代理服务费：人民币44280.00元。\n收款单位：四川惠创地招标代理有限公司；\n开户行：成都银行股份有限公司南城支行；\n银行账号：1001300000710451', NULL, '2021-09-23', 44280.00, 44280.00, '已核，拟同意。费用配合单位已交至财务资产部。', 13, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-24', '2021-09-24', '2021-09-26', NULL, NULL, '2021-09-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418856210412', NULL, '1', '国网西藏拉萨发电公司2021年羊湖电站第八期压力钢管永久变形监测网校核', 25, 105, '备注“31AWY3（04包）代理服务费”\n收款人名称： 西藏慧联电力实业有限公司\n开户银行： 建行林廓北路支行(拉萨市) \n账    号： 54050103363600002127\n财务联系人：赵女士0891-6894381(服务费相关咨询)', NULL, '2021-10-13', 13485.00, 13485.00, '已核，情况属实。', 13, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-13', '2021-10-18', '2021-10-18', NULL, NULL, '2021-10-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418856220413', '1648881415815430146', '0', NULL, 138, NULL, '此次款项用于四号线的小棱镜购买、项目人员生活开支费用，地下管线内窥开展相关费用等。', NULL, '2021-07-06', 50000.00, 50000.00, '同意。', 142, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-06', '2021-07-08', '2021-07-13', NULL, NULL, '2021-07-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418856230414', '1648881415219838978', '0', NULL, 49, NULL, NULL, NULL, '2021-08-09', 10000.00, 10000.00, NULL, 49, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-09', '2021-08-09', '2021-08-09', NULL, NULL, '2021-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418856240415', '1648881415412776962', '0', NULL, 83, 111, '以上费用为外业航测、像控点和检查点测量等前期工作费用。', NULL, '2021-08-16', 8000.00, 8000.00, NULL, 83, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-16', '2021-08-16', '2021-08-24', NULL, NULL, '2021-08-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418856250416', '1648881415815430146', '0', NULL, 138, NULL, '重庆两个项目：一、轨道交通项目分包已经进场工作；\n二、管线内窥项目基本完成30公里左右内窥（还剩4个报告正在生成，预计本周完成）。\n1、其中有6公里左右外包劳务完成，资料提交后需付3万元左右。\n2、现场项目用人有暑假工，重庆项目新招人员，项目司机，他们工资需项目上预发一部分，预计1万元。\n3、两个项目共九人日常生活开销，车辆油费开销等预支4万元', NULL, '2021-08-09', 80000.00, 80000.00, '同意。', 142, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-10', '2021-08-10', '2021-08-13', NULL, NULL, '2021-08-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418856260417', NULL, '0', NULL, 14, 106, '备用金', NULL, '2021-08-17', 20000.00, 20000.00, NULL, 14, '同意', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-17', '2021-08-18', '2021-08-18', NULL, NULL, '2021-08-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418856270418', NULL, '1', '广安自然资源确权项目 雅安林权测绘项目', 21, 105, '广安自然资源确权项目 雅安林权测绘项目', NULL, '2021-08-17', 15000.00, 15000.00, '已核。', 13, NULL, 7, 2, '同意拨付.', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-17', '2021-08-23', '2021-08-26', NULL, NULL, '2021-08-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418856280419', NULL, '1', '邻水宅基地项目2021年8月', 59, NULL, NULL, NULL, '2021-08-23', 47600.00, 47600.00, '同意', 142, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-24', '2021-08-24', '2021-08-26', NULL, NULL, '2021-08-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418856290420', '1648881414951403522', '0', NULL, 83, 111, '预计项目外业工期为10日（进出场6日，外业工作4日），项目参与人员4人（含司机）', NULL, '2021-08-25', 9500.00, 9500.00, '同意。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-25', '2021-08-25', '2021-08-26', NULL, NULL, '2021-08-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418856300421', '1648881416641708034', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2021年08月份现场作业成本支出。另外，雷光泽车辆方向盘出现问题，已告知综合事务部，目前在姑咱维修，费用1500元。受降雨加密观测，本月民工费支出略有增加。', NULL, '2021-08-30', 18500.00, 18500.00, NULL, 101, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-30', '2021-08-31', '2021-09-06', NULL, NULL, '2021-09-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418856310422', '1648881419619663874', '0', NULL, 39, 108, '罗江项目自己检查，预算10天。还要配合质检站检查，5个乡镇，故计算5次接待费。', NULL, '2021-09-08', 10100.00, 10100.00, '同意', 39, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-08', '2021-09-08', '2021-09-10', NULL, NULL, '2021-09-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418856320423', NULL, '1', '备用金', 112, 104, '备用金申请。', NULL, '2021-10-11', 30000.00, 30000.00, '同意。', 112, '合理安排。', 2, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-11', '2021-10-11', '2021-10-11', NULL, NULL, '2021-10-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418856330424', NULL, '1', '2021年第一期测绘成果档案和保密管理培训', 52, 109, '2021年第一期测绘成果档案和保密管理培训  共4人 （ 陈洪 贾春华 柯枭  周文婷）\n收款单位：成都测绘职工中等专业学校\n开户银行：工行四川分行营业部龙泉支行\n账号：4402 2340 0902 6431 488\n汇款后请及时与周娅核实确认，电话：13541209008。', NULL, '2021-10-11', 3600.00, 3600.00, '符合需求，同意借款。', 50, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-11', '2021-10-12', '2021-10-13', NULL, NULL, '2021-10-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418856340425', '1648881415815430146', '0', NULL, 138, NULL, '此次借款说明1、用于施工监测与三方监测项目的生活、生产开销。\n                    2、用于两套房屋的租房相关费用\n                    3、用于重庆项目招用人员部分工资的发放。', NULL, '2021-10-20', 60000.00, 60000.00, '同意', 142, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-21', '2021-10-21', '2021-10-21', NULL, NULL, '2021-10-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418856350426', NULL, '1', '无人机运输费用', 32, 102, '货拉拉运无人机到西藏米林，含返回拉一台飞机回来。', NULL, '2021-10-20', 11000.00, 11000.00, NULL, 32, '同意', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-20', '2021-10-21', '2021-10-21', NULL, NULL, '2021-10-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418856360427', '1648881414313869314', '0', NULL, 61, 111, '1、本次借款为后补借款，按实际金额申请；\n2、参与人员4人（含驾驶员），工期10天；', NULL, '2021-12-03', 11000.00, 11000.00, '情况属实，建议借款。', 61, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-03', '2021-12-10', '2021-12-10', NULL, NULL, '2021-12-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418856370428', '1648881415492468738', '0', NULL, 101, 112, '工期计划25天左右。', NULL, '2021-07-16', 30000.00, 30000.00, NULL, 101, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-17', '2021-07-20', '2021-07-22', NULL, NULL, '2021-07-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418856380429', '1648881414926237697', '0', NULL, 32, 107, '米林空域申请', NULL, '2021-08-26', 20000.00, 2000.00, NULL, 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-26', '2021-08-27', '2021-09-06', NULL, NULL, '2021-09-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418856390430', NULL, '1', '美姑县农村集体土地确权登记发证项目', 20, NULL, '现场食宿及商务接待等费用支出。', NULL, '2021-09-07', 20000.00, 15000.00, '同意', 142, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-08', '2021-09-08', '2021-09-10', NULL, NULL, '2021-09-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418856400431', NULL, '1', '猴子岩水电站外部变形监测2021年上半年结算税金及其他费用', 101, 112, '猴子岩水电站外部变形监测2021年上半年产值2855215.33元（含2020年部分变更结算），需在项目所在地缴纳14万左右税金，其他费用情况为项目运行必要支出费用（已向总经理说明该费用支出情况）。本次结算费用甲方将于2021年10月支付合同款。', NULL, '2021-09-07', 220000.00, 220000.00, NULL, 101, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-07', '2021-09-08', '2021-09-10', NULL, NULL, '2021-09-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418856410432', '1648881415815430146', '0', NULL, 138, NULL, '借款用于项目车辆租赁、项目招用人员部分工资支付以及项目日常生活开销。', NULL, '2021-09-22', 40000.00, 40000.00, '同意', 142, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-23', '2021-09-23', '2021-09-26', NULL, NULL, '2021-09-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418856420433', '1648881416578793474', '0', NULL, 102, 112, '二滩项目部9月成本支出', NULL, '2021-09-24', 34610.00, 34610.00, '同意', 101, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-26', '2021-09-27', '2021-09-27', NULL, NULL, '2021-09-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418856430434', '1648881414657802242', '0', NULL, 83, 111, '该项目预计投入4人，预计工期为5日。', NULL, '2021-10-04', 6000.00, 6000.00, '同意。', 83, '建议借支。', 10, 2, '同意拨付.', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-04', '2021-10-08', '2021-10-08', NULL, NULL, '2021-10-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418856440435', NULL, '1', '车辆燃油费及保险费用', 16, 104, NULL, NULL, '2021-10-08', 30000.00, 30000.00, '建议合理使用。', 112, '及时报销和冲抵。', 2, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-08', '2021-10-09', '2021-10-09', NULL, NULL, '2021-10-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418856450436', NULL, '1', '大渡河猴子岩水电站工程荣获2020-2021国家优质工程金奖（我公司为获奖参建单位之一，金质奖杯制作）', 101, 112, '备注：国家优质工程金奖--奖杯制作\n单位名称：金利阳（北京）文化发展有限公司\n开户银行：浦发银行北京复兴路支行\n银行账号：9123 0154 8000 02028\n行号：310100000229', NULL, '2021-11-03', 6498.00, 6498.00, NULL, 101, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-03', '2021-11-03', '2021-11-04', NULL, NULL, '2021-11-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418856460437', NULL, '1', '2021年天府科创贷担保费', 14, 101, '公司名称：成都中小企业融资担保有限责任公司\n开户行及账号：成都银行股份有限公司体育场路支行30022010218611500012\n贷款金额500万，担保费2%，打九折后9万元整', NULL, '2021-11-10', 90000.00, 90000.00, NULL, 14, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-10', '2021-11-10', '2021-11-10', NULL, NULL, '2021-11-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418856470438', '1648881414389366785', '0', NULL, 61, 111, '1、本次借款包含霞曲项目费用；\n2、地面工作及D200飞行，计划4人（含司机）、周期20天；\n3、大黄蜂飞行，计划3人（含驾驶员）、周期7天；\n4、车辆维修为实际发生费用；\n5、后期如有需要根据实际发生费用增加借款；', NULL, '2021-11-16', 38000.00, 38000.00, '情况属实，建议借款', 61, '建议借支。', 10, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-16', '2021-11-18', '2021-11-23', NULL, NULL, '2021-11-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418856480439', NULL, '1', '工程治理体系建设5个项目治理效果监测专家报告评审费', 25, 105, NULL, NULL, '2021-11-18', 10000.00, 10000.00, '已核，拟同意，该费用由协作单位支付，因要求转至特定账户，故而我公司转账支付，协作单位将费用转来后再行支付。', 13, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-22', '2021-11-22', '2021-11-23', NULL, NULL, '2021-11-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418856490440', NULL, '1', '新增人员意外保险', 8, 104, '公司名称: 泰康养老保险股份有限公司四川分公司。\n开户行: 工商银行盐市口支行\n账号:4402 9020 1910 0185 385', NULL, '2021-11-22', 2196.40, 2196.40, '同意。', 112, '同意。', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-22', '2021-11-23', '2021-11-23', NULL, NULL, '2021-11-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418856500441', NULL, '1', '长江大保护业务测量技术服务协作项目重新招标', 25, 105, NULL, NULL, '2021-11-22', 30000.00, 30000.00, '已核，该项目为配合水电4局项目。拟同意。', 13, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-11-22', '2021-11-23', '2021-11-24', NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418856510442', NULL, '1', '技术中心审查费用', 52, 109, '技术中心审查费用', NULL, '2021-07-05', 3000.00, 3000.00, '同意。', 46, '同意。', 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-05', '2021-07-05', '2021-07-06', NULL, NULL, '2021-07-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418856520443', NULL, '1', '车辆保险和油料费用', 16, 200, NULL, NULL, '2021-07-05', 20000.00, 20000.00, '同意。', 112, '同意', 2, 2, '可以拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-05', '2021-07-06', '2021-07-06', NULL, NULL, '2021-07-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418856530444', NULL, '1', ' 北京中大华远认证中心认证费用', 52, 109, '收款单位 ： 北京中大华远认证中心四川分中心\n开户银行：中信银行股份有限公司成都武侯支行\n账号：7413310182600013961', NULL, '2021-07-09', 32000.00, 32000.00, '同意，情况属实。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-09', '2021-07-09', '2021-07-13', NULL, NULL, '2021-07-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418856540445', NULL, '1', '激光设备投保（人保 沈阳公司）', 8, 104, NULL, NULL, '2021-07-28', 114000.00, 114000.00, '同意。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-28', '2021-07-28', '2021-07-28', NULL, NULL, '2021-07-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418856550446', '1648881416641708034', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2021年07月份现场作业成本支出。', NULL, '2021-08-02', 15000.00, 15000.00, NULL, 101, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-02', '2021-08-03', '2021-08-04', NULL, NULL, '2021-08-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418856560447', NULL, '1', '商业保险借款', 8, 104, '名称：泰康养老保险股份有限公司四川分公司\n开户行：中国工商银行成都盐市口支行\n账号：4402 9020 1910 0185 385', NULL, '2021-08-03', 687.60, 687.60, '建议借支', 112, '建议借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-05', '2021-08-05', '2021-08-05', NULL, NULL, '2021-08-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418856570448', '1648881416578793474', '0', NULL, 102, 112, '增加金龙山季度观测费用和二滩平面季度观测费用。', NULL, '2021-08-18', 59472.00, 59472.00, '同意，本月工作量较上月有所增加。另外，请项目负责人尽快办理与甲方2021年二季度的结算事宜。', 101, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-18', '2021-09-01', '2021-09-06', NULL, NULL, '2021-09-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418856580449', NULL, '1', '光纤费用', 148, 104, '光纤扩容，补交2021年9月光纤费用598元。预交2021年10月-2022年3月光纤费用，每月866元。金额合计5794元。转账，账号信息--收款方：中国移动通信集团四川有限公司成都分公司；开户银行：中国工商银行春熙路支行；账号：4402209009005411951。', NULL, '2021-08-20', 5794.00, 5794.00, '同意。', 112, '同意。', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-20', '2021-08-24', '2021-08-24', NULL, NULL, '2021-08-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418856590450', '1648881415219838978', '0', NULL, 49, 109, NULL, NULL, '2021-08-24', 20000.00, 15000.00, '同意申请！', 20, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-25', '2021-08-25', '2021-08-26', NULL, NULL, '2021-08-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418856600451', '1648881415609909250', '0', NULL, 55, 109, '预计工期来回五天，住宿费用、加油费用参考项目实施时产生费用，餐饮考虑部分招待费', NULL, '2021-09-03', 5000.00, 5000.00, '同意，情况属实。', 46, NULL, 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-03', '2021-09-03', '2021-09-06', NULL, NULL, '2021-09-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418856610452', NULL, '1', '车辆保险及油料费用', 16, 104, NULL, NULL, '2021-09-06', 20000.00, 20000.00, '建议合理使用。', 112, '同意。', 2, 2, '须合理支配。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-06', '2021-09-06', '2021-09-06', NULL, NULL, '2021-09-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418856620453', '1648881414926237697', '0', NULL, 32, 102, '米林空域', NULL, '2021-09-06', 18000.00, 18000.00, '同意', 32, '上次申请借款2万，在审核时吴审为2千，因此补借1.8万元。\n建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-06', '2021-09-08', '2021-09-08', NULL, NULL, '2021-09-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418856630454', NULL, '1', '邻水勘测定界项目配合省质检站检查', 50, 101, '配合省质检站检查住宿，用餐，人员费用', NULL, '2021-09-21', 6000.00, 6000.00, NULL, 50, NULL, 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-21', '2021-09-21', '2021-09-22', NULL, NULL, '2021-09-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418856640455', '1648881416641708034', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2021年09月份现场作业成本支出。', NULL, '2021-09-27', 13700.00, 13700.00, NULL, 101, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-27', '2021-10-08', '2021-10-08', NULL, NULL, '2021-10-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418856650456', NULL, '1', '成都市成华区规划和自然资源局地下管线普査成果更新项目（第二包）中标服务费', 23, 105, '户名：中国远东国际招标有限公司四川分公司\n\n开户行：中国农业银行股份有限公司成都桐梓林支行\n\n银行账号：22808001040003891\n\n行号：103651080759', NULL, '2021-09-28', 1164.70, 1164.70, '已核，拟同意。', 13, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-28', '2021-09-28', '2021-10-02', NULL, NULL, '2021-10-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418856660457', NULL, '1', '备用金', 14, 106, '借支备用金', NULL, '2021-07-22', 38000.00, 38000.00, NULL, 14, '同意', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-22', '2021-07-22', '2021-07-22', NULL, NULL, '2021-07-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418856670458', '1648881416578793474', '0', NULL, 102, 112, '7月二滩监测项目部成本。', NULL, '2021-07-20', 34104.00, 34104.00, NULL, 101, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-20', '2021-07-27', '2021-07-28', NULL, NULL, '2021-07-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418856680459', NULL, '1', '沐川县林权登记数据整合建库采购项目（第二次）中标服务费', 23, 105, '    账户名：四川璞则工程管理有限公司\n    开户行：招商银行乐山分行\n    账　号：983900426010902\n', NULL, '2021-07-23', 68850.00, 68850.00, '已核，情况属实', 13, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-23', '2021-07-26', '2021-07-28', NULL, NULL, '2021-07-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418856690460', NULL, '1', '邻水宅基地项目现场开支2021年7月', 59, NULL, NULL, NULL, '2021-07-25', 43675.00, 43675.00, '同意。', 142, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-28', '2021-07-30', '2021-08-05', NULL, NULL, '2021-08-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418856700461', '1648881415375028225', '0', NULL, 83, 111, '因测区无手机信号，需要按E级精度进行静态观测由四川CORS中心进行平差计算获得平面及高程的起算数据。测区位于放牧区牦牛较多，平均海拔4200米以上，需要聘请民工辅助进行控制点埋设及帮忙看守基站。', NULL, '2021-07-26', 12000.00, 12000.00, '同意。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-26', '2021-07-27', '2021-07-28', NULL, NULL, '2021-07-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418856710462', '1648881415265976322', '0', NULL, 61, 111, '1、现场3人（含司机）；\n2、预计工期8天（含进出场）；\n3、其他包含高温防护用品等；', NULL, '2021-08-03', 7000.00, 7000.00, '建议借款', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-03', '2021-08-03', '2021-08-04', NULL, NULL, '2021-08-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418856720463', '1648881415395999745', '0', NULL, 32, 102, NULL, NULL, '2021-08-04', 5950.00, 5950.00, '同意，数据采集已按计划进行', 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-04', '2021-08-05', '2021-08-05', NULL, NULL, '2021-08-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418856730464', '1648881415286947841', '0', NULL, 61, 102, '1、项目借款包含牙根，长河坝；\n2、项目人员3人（含司机）；\n3；预计工期共计12天。', NULL, '2021-08-11', 9500.00, 9500.00, '联建议借款', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-11', '2021-08-11', '2021-08-12', NULL, NULL, '2021-08-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418856740465', NULL, '1', '新增人员意外保险', 8, 104, '户名：泰康养老保险股份有限公司四川分公司\n账号：4402 9020 1910 0185 385', NULL, '2021-09-13', 1710.00, 1710.00, '同意。', 112, '同意.', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-13', '2021-09-15', '2021-09-15', NULL, NULL, '2021-09-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418856750466', '1648881415412776962', '0', NULL, 83, 111, '该项目后续工作：断面测绘、地形图调绘、水下地形测绘工作预计投入5人，预计工期为20日。', NULL, '2021-10-04', 25000.00, 25000.00, '同意。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-04', '2021-10-08', '2021-10-08', NULL, NULL, '2021-10-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418856760467', '1648881414641025025', '0', NULL, 83, 111, '1，本项目计划工期为60天，预计投入作业员7人，租车司机1人，人天数为480；\n2，无人机飞行组投入人员3人，预计工作20日。人天数为60；\n3，因项目需要，需要租赁车辆，每日费用为800元（含加油费）；\n4，其它成本为购买药品、防护用品及办公用品等；', NULL, '2021-10-07', 170000.00, 150000.00, '同意。', 83, '建议借支。根据实际开支需要，按月支付。', 10, 2, '同意上述意见。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-07', '2021-10-08', '2021-10-08', NULL, NULL, '2021-10-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418856770468', '1648881414603276289', '0', NULL, 102, 112, '人员进场后根据当地实际定价进行计算预估。', NULL, '2021-10-11', 108560.00, 100560.00, '开支情况属实，为必要支出费用。', 101, '建议借支。\n按项目实际开支，分批支付。', 10, 2, '同意上述意见，按生产实际需要拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-11', '2021-10-12', '2021-10-13', NULL, NULL, '2021-10-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418856780469', '1648881415567966210', '0', NULL, 83, 111, NULL, NULL, '2021-07-07', 7000.00, 7000.00, '同意。', 83, '建议同意借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-07', '2021-07-08', '2021-07-13', NULL, NULL, '2021-07-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418856790470', '1648881415047872514', '0', NULL, 83, 111, '1，由于该项目新增工作量，计划投入4人，预计工期为14天。\n2，由于前期布设的控制点未控制住本次测区，需要再由CORS中心解算新增控制点正常高。', NULL, '2021-09-08', 11000.00, 11000.00, '同意。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-09-08', '2021-09-08', '2021-09-10', NULL, NULL, '2021-09-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418856800471', NULL, '1', '2021年第一期测绘成果档案和保密管理培训', 52, 109, '2021年第一期测绘成果档案和保密管理培训  增加3人 （ 刘非  阴学军  樊宽林）\n收款单位：成都测绘职工中等专业学校\n开户银行：工行四川分行营业部龙泉支行\n账号：4402 2340 0902 6431 488\n汇款后请及时与周娅核实确认，电话：13541209008。', NULL, '2021-10-12', 2700.00, 2700.00, '符合需求，同意借款。', 50, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-13', '2021-10-14', '2021-10-18', NULL, NULL, '2021-10-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418856810472', '1648881414657802242', '0', NULL, 61, 111, '1、本次借款为增加借款；\n2、原借款有3000开支到小水项目；', NULL, '2021-10-22', 6000.00, 6000.00, '以核实，借款为实际开支补充，建议借款', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-22', '2021-10-25', '2021-10-28', NULL, NULL, '2021-10-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418856820473', NULL, '1', '西藏JW、米林库区项目检查', 49, 109, '出差人员有：向发廷、黄美玲、李旭', NULL, '2021-10-27', 30000.00, 30000.00, '同意。', 9, '同意。', 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-28', '2021-10-28', '2021-10-28', NULL, NULL, '2021-10-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418856830474', '1648881416578793474', '0', NULL, 102, 112, '项目部10月开支，增加两站观测便道和观测墩维护、桐子林基准网观测，桐子林基准网新建两个点，观测2次。', NULL, '2021-10-27', 71060.00, 71060.00, NULL, 101, '建议借支。', 10, 2, '逐步拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-10-27', '2021-11-10', '2021-11-10', NULL, NULL, '2021-11-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418856840475', NULL, '1', '雅砻江二滩、桐子林水电站 2022~2026 年度大坝外部变形和近坝区滑坡稳定性监测项目', 25, 105, '雅砻江二滩、桐子林水电站 2022~2026 年度大坝外部变形和近坝区滑坡稳定性监测项目中标服务费', NULL, '2021-11-01', 78315.63, 78315.63, '已核，情况属实。建议支付。', 13, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-01', '2021-11-01', '2021-11-01', NULL, NULL, '2021-11-01');
INSERT INTO `cmc_borrow` VALUES ('1648881418856850476', NULL, '1', '四川省市政市容协会2021年会费', 112, 104, '四川省市政市容协会2021年会费缴纳；\n开户行：四川省市政市容协会\n账号：511 6090 1701 8000 576 189\n开户银行：交通银行成都南二环路支行\n特别说明：请注明单位的名称：四川中水成勘院测绘工程有限责任公司；用途：分会副会长单位3000元；缴费年度为：2021年；', NULL, '2021-11-08', 3000.00, 3000.00, '同意。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-08', '2021-11-08', '2021-11-08', NULL, NULL, '2021-11-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418856860477', NULL, '1', '工程治理体系建设5个项目治理效果监测项目', 25, 105, NULL, NULL, '2021-11-11', 31395.00, 31395.00, '已核，经与代理及协作单位沟通落实，专家评审费一并转交给代理机构，拟同意。', 13, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-12', '2021-11-16', '2021-11-16', NULL, NULL, '2021-11-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418856870478', NULL, '1', '雅砻江二滩、桐子林水电站2022～2026年大坝外部变形和近坝区滑坡稳定性项目履约保函', 14, 101, '三年担保费用', NULL, '2021-11-11', 15000.00, 0.00, NULL, 14, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-11-11', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418856880479', NULL, '1', '专利年费', 52, 109, '一、银行网转，将全部年费汇入国家知识产权局账号。\n国家知识产权局账号：中信银行北京知春路支行\n户名:国家知识产权局专利局\n帐号:7111710182600166032', NULL, '2021-11-12', 1200.00, 1200.00, '符合需求，同意借款。', 50, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-12', '2021-11-15', '2021-11-16', NULL, NULL, '2021-11-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418856890480', '1648881414926237697', '0', NULL, 61, 102, 'ML项目部分区域无法飞行，购买影像资料成图。', NULL, '2021-11-11', 60000.00, 60000.00, '情况属实，建议借款', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-11', '2021-11-12', '2021-11-16', NULL, NULL, '2021-11-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418856900481', NULL, '0', NULL, 32, 102, '达州空域申请', NULL, '2021-07-19', 10000.00, 10000.00, NULL, 32, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-19', '2021-07-20', '2021-07-22', NULL, NULL, '2021-07-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418856910482', '1648881415412776962', '0', NULL, 83, 111, NULL, NULL, '2021-07-27', 20000.00, 20000.00, '同意。', 83, '建议借支。结算时以实际发生金额为准。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-07-27', '2021-07-28', '2021-07-28', NULL, NULL, '2021-07-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418856920483', '1648881414905266178', '0', NULL, 83, 111, '预计该项目外业生产时间为7日，现场投入人员5人（含司机）', NULL, '2021-08-30', 7000.00, 7000.00, '同意。', 83, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-08-30', '2021-08-31', '2021-09-06', NULL, NULL, '2021-09-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418856930484', '1648881416641708034', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2021年11月份现场作业成本支出。', NULL, '2021-11-25', 15700.00, 15700.00, NULL, 101, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-25', '2021-11-29', '2021-12-06', NULL, NULL, '2021-12-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418856940485', NULL, '1', '四川中水成勘院测绘工程公司  2个cors账号sczsck02、sczsck03年费一年', 52, 109, 'SCCORS技术服务费收费账号\n单位名称：自然资源部第三大地测量队\n开户行：建行成都经济技术开发区支行\n账 号：5100 1556 8080 5012 6868\n注意：此账号不支持微信、支付宝和现金付费，支持手机银行、网上银行，银行自动柜台（不是ATM机）转账。', NULL, '2022-02-13', 12800.00, 6400.00, '项目需求借款。', 50, NULL, 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-13', '2022-02-14', '2022-02-16', NULL, NULL, '2022-02-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418856950486', NULL, '1', '申请备用金。', 112, 104, '由于年前集中开支较大，经过梳理，已超支费用约为18000；本次特申请备用金费用35000。', NULL, '2022-02-17', 35000.00, 35000.00, '拟同意，合理开支。', 112, '同意', 2, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-17', '2022-02-18', '2022-02-18', NULL, NULL, '2022-02-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418856960487', '1648881413860884481', '0', NULL, 102, 112, '二滩项目部2月项目支出费用。', NULL, '2022-02-23', 34004.00, 34004.00, '同意。', 101, '情况属实。建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-23', '2022-02-28', '2022-03-01', NULL, NULL, '2022-03-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418856970488', '1648881413911216130', '0', NULL, 83, 111, '1.该项目春节前租用乐山市海事局所属机动船进行水下测量，租用时间3天；\n2.激光技术部现场飞行投入3人、司机1人，受现场飞行空域、降雨、大雾等天气影响预计工期为16日；\n3.现场分两个组开展水准测量，预计需要4名民工、工期5天；\n4.测绘工程中心现场投入人员4人（丁亮、邓锡全、唐浩、潘林海）司机1名，预计现场工作20日。', NULL, '2022-02-23', 35420.00, 34420.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-23', '2022-02-23', '2022-03-01', NULL, NULL, '2022-03-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418856980489', '1648881413667946498', '0', NULL, 71, 111, NULL, NULL, '2022-02-26', 5900.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418856990490', '1648881413667946498', '0', NULL, 83, 111, '该项目预计投入4人（杨为康、蒋剑虹、赵明焱、凌涛），预计现场工作7日。', NULL, '2022-02-25', 6400.00, 5940.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-25', '2022-02-28', '2022-03-01', NULL, NULL, '2022-03-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418857000491', '1648881413651169282', '0', NULL, 83, 111, '该项目投入4人（杨为康、蒋剑虹、赵明焱、凌涛）预计现场工作5天。', NULL, '2022-02-25', 4360.00, 4060.00, '同意。', 83, '建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-25', '2022-02-28', '2022-03-01', NULL, NULL, '2022-03-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418857010492', '1648881414641025025', '0', NULL, 83, 111, '1.新增米林坝下~XR坝址控制测量工作、XR坝区复核及JW年前剩余调绘工作。\n2.该项目预计总公司投入7人（杨振、杨晶、张杰、赵程鸿、夏志斌、潘林海、邓静）、子公司投入2人（程昊、肖建光）、司机1名。\n3.预计现场控制点土建需要10天，聘请2名工人，水准测量需要40天，聘请工人4人。\n4.水准测量需要公司派遣能拉水准尺的车辆1辆，预计现场工作40天，往返各4天。', NULL, '2022-03-15', 167600.00, 164800.00, '同意。', 83, '同意借支。按工作进度及实际现场开支需要，逐步支付。', 10, 2, '按实际需要拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-15', '2022-03-20', '2022-03-21', NULL, NULL, '2022-03-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418857020493', NULL, '1', '双江口、巴拉测量中心出差', 58, 104, NULL, NULL, '2022-02-28', 5000.00, 5000.00, '拟同意，应合理开支。', 112, '同意', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-28', '2022-03-01', '2022-03-01', NULL, NULL, '2022-03-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418857030494', '1648881413512757249', '0', NULL, 83, 111, '1.该项目参与人员4人（杨为康、刘轩庭、黄建春、周建伟）；交通专业另有4人，食宿由我们统一管理；\n2.预计现场工作31天（进出场4天，GNSS测量8天，三角高程测量7天，转场2日、放样与测图10天。）\n3.现场需要聘请工人埋设控制点、搬运设备。测绘工作预计72个工/天、交通专业预计20个工/天；', NULL, '2022-03-18', 72400.00, 52760.00, '同意。', 83, '鉴于测区困难程度，必须聘用临时工；设计人员不一定全过程在外业现场，因此借支额度减少。如实际开支超过借支金额时，再据实申请借支。\n设计人员现场开支，请如实记录并作为项目结算依据。\n建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-18', '2022-03-22', '2022-03-23', NULL, NULL, '2022-03-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418857040495', '1648881416578793474', '0', NULL, 102, 112, '二滩11月开支，增加二滩基准网年度观测、新购车辆加配费用、购买安全帽。', NULL, '2021-11-26', 58876.00, 57676.00, '建议安全帽由公司统一采购。', 101, '建议借支。', 10, 2, '按需拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-26', '2021-11-29', '2021-12-06', NULL, NULL, '2021-12-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418857050496', NULL, '1', '二滩水电站安全监测项目部购买安全帽20顶', 58, 104, '二滩水电站安全监测项目部购买安全帽20顶', NULL, '2021-12-01', 1300.00, 1300.00, '同意。', 112, '同意', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-03', '2021-12-06', '2021-12-06', NULL, NULL, '2021-12-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418857060497', '1648881414213206018', '0', NULL, 61, 111, '1、本次借款为后补借款，按实际开销申请；\n2、现场3人（含驾驶员），工期3天；', NULL, '2021-12-02', 1500.00, 1500.00, '情况属实，建议借款。', 61, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-02', '2021-12-09', '2021-12-10', NULL, NULL, '2021-12-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418857070498', '1648881414544556034', '0', NULL, 21, 105, '商务成本费', NULL, '2021-12-06', 15900.00, 15900.00, '已核，无异议。', 13, NULL, 7, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-12-06', '2021-12-06', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418857080499', '1648881416578793474', '0', NULL, 102, 112, '增加金龙山四季度观测费24500', NULL, '2021-12-20', 58068.00, 58068.00, NULL, 101, '情况属实，建议借支。', 10, 2, '同意上述意见，按需支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-21', '2021-12-27', '2021-12-27', NULL, NULL, '2021-12-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418857090500', '1648881415219838978', '0', NULL, 49, NULL, '2021年12月21日至2022年01月21日生产费用（现场3人）', NULL, '2021-12-21', 12100.00, 12100.00, '同意借款！', 20, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-21', '2021-12-21', '2021-12-22', NULL, NULL, '2021-12-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418857100501', NULL, '1', '泸县2021年度国土变更调查', 23, 105, '个人借款', NULL, '2022-01-06', 23037.00, 23037.00, '已核，代理公司不希望采用公对公转账方式支付中标服务费，借款方式支付，请柯枭让代理公司出具收据。', 13, NULL, 7, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-07', '2022-01-10', '2022-01-10', NULL, NULL, '2022-01-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418857110502', NULL, '1', '邻水宅基地项目2022年1月', 59, NULL, '项目部1月23日撤场，费用均统计至23号。', NULL, '2022-01-26', 17000.00, 17000.00, '同意。', 142, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-27', '2022-01-27', '2022-02-07', NULL, NULL, '2022-02-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418857120503', NULL, '1', '中国地理产业协会会费（2021年10月至2025年10月）', 52, 109, '开户名称：中国地理信息产业协会\n开户银行：中信银行北京分行营业部\n银行账号：7111010195700004701\n银行行号：302100011106\n备注内容：会费', NULL, '2022-02-16', 20000.00, 20000.00, '符合需求，同意借款。', 50, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-16', '2022-02-17', '2022-02-18', NULL, NULL, '2022-02-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418857130504', NULL, '1', '中国测绘学会团体会员2022年会费', 52, 109, '单位户名：中国测绘协会\n账号：7111010182600309117\n开户行：中信银行北京分行营业部\n税号：51100001500001915G\n银行联动号：302100011106\n汇款用途：2022年团体会费\n备注内容：会费', NULL, '2022-02-16', 6000.00, 6000.00, '符合需求，同意借款。', 50, '同意。', 9, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-16', '2022-02-17', '2022-02-18', NULL, NULL, '2022-02-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418857140505', '1648881413651169282', '0', NULL, 71, 111, NULL, NULL, '2022-02-26', 4100.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418857150506', '1648881415815430146', '0', NULL, 138, NULL, '本次借款用于现场生产、生活、以及现场实习人员绩效工资，车辆租赁等开销。', NULL, '2022-03-04', 50000.00, 50000.00, '同意按此金额借款。', 142, '同意', 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-04', '2022-03-04', '2022-03-08', NULL, NULL, '2022-03-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418857160507', NULL, '1', '邻水宅基地项目2022年2-3月', 59, NULL, '借款时段为2月13日至3月31日', NULL, '2022-03-07', 16500.00, 16500.00, '情况属实，同意借款。', 142, '已核', 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-09', '2022-03-10', '2022-03-11', NULL, NULL, '2022-03-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418857170508', '1648881414527778817', '0', NULL, 83, 111, '因现场工作难度大于预期，补充申请项目经费。', NULL, '2021-11-24', 10000.00, 10000.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-24', '2021-12-29', '2021-12-30', NULL, NULL, '2022-01-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418857180509', '1648881414880100353', '0', NULL, 61, 111, '因工作需要，2021年度地震（次生地质灾害）应急桌面演练项目，委托大疆公司人员现场配合2次，合计13人.天。按500元/人.天，共计6500元进行结算；', NULL, '2021-11-25', 6500.00, 6500.00, '情况属实，建议借款', 61, '情况属实。借支用于支付设备提供方现场配合人员费用，共计13人天。不再支付设备使用费。\n建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-25', '2021-11-26', '2021-12-06', NULL, NULL, '2021-12-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418857190510', '1648881414175457281', '0', NULL, 101, 112, '1、进出场费用含机票、动车交通费，人员为周全、张学仪、高强、黄安堂等4人\n2、生活成本按每人120一天，按3人30天计算\n3、住宿按照2个房间，每间150元。按30天计算\n4、由于测区在市区分散，且距离较远，需租车或者打车前往，每天按150元计算。', NULL, '2021-12-01', 31300.00, 30000.00, '按一个月（30天）工期制定开支借款。', 101, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-01', '2021-12-13', '2021-12-14', NULL, NULL, '2021-12-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418857200511', NULL, '1', '备用金', 112, 104, '上次申请的备用金已经用完，请领导批准。', NULL, '2021-12-03', 20000.00, 20000.00, '同意。', 112, '同意', 2, 2, '按需拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-03', '2021-12-06', '2021-12-06', NULL, NULL, '2021-12-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418857210512', '1648881419607080962', '0', NULL, 113, NULL, '南江市级验收费用10000元，用于生活。', NULL, '2021-12-22', 10000.00, 10000.00, '同意借款。', 20, NULL, 7, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-23', '2021-12-24', '2021-12-27', NULL, NULL, '2021-12-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418857220513', NULL, '1', '国能四川阿水电力开发有限公司绰斯甲水电站工程测量中心技术服务合同履约保函担保费', 14, 101, '成都中小企业融资担保有限责任公司    账号：30022010218611500012  开户行：成都银行体育场支行', NULL, '2022-01-04', 49820.99, 49820.99, NULL, 14, '同意', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-04', '2022-01-04', '2022-01-04', NULL, NULL, '2022-01-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418857230514', '1648881413877661698', '0', NULL, 61, 111, '1、项目计划安排人员5人（含公司驾驶员及委外飞行人员）；\n2、预计工天7天；', NULL, '2022-01-15', 9000.00, 9000.00, '同意。', 83, '建议借支。', 10, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-17', '2022-01-18', '2022-01-18', NULL, NULL, '2022-01-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418857240515', '1648881419179261954', '0', NULL, 32, NULL, '绰斯甲项目复核', NULL, '2022-01-19', 4600.00, 4600.00, '同意借款。', 32, '建议借支。', 10, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-19', '2022-01-21', '2022-01-25', NULL, NULL, '2022-01-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418857250516', '1648881413844107265', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2022年01月份现场作业成本支出，本月邻近春节，需增加一定其他费用支出，该费用支出均作为项目承包费生产成本，费用明细见下方Excel。', NULL, '2022-01-21', 46900.00, 46900.00, NULL, 101, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-21', '2022-02-15', '2022-02-16', NULL, NULL, '2022-02-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418857260517', '1648881413948964865', '0', NULL, 83, 111, '该项目参与人员3人、星辰仪器公司2人（现场培训无人船），现场工作时间为2天。', NULL, '2022-02-14', 2020.00, 2020.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-15', '2022-02-22', '2022-03-01', NULL, NULL, '2022-03-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418857270518', NULL, '1', '新车加装掀背盖、镀锌货箱宝、购置税及保险；车辆燃油费等。', 16, 104, '新车加装掀背盖、镀锌货箱宝、购置税及保险26000元；车辆燃油费及公司车辆保险费用22000元备用。', NULL, '2022-02-22', 48000.00, 48000.00, '拟同意，备用金应合理开支。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-22', '2022-03-01', '2022-03-01', NULL, NULL, '2022-03-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418857280519', '1648881413684723714', '0', NULL, 83, 111, '该项目测绘工程中心投入2人（丁亮、唐浩），预计工作5天，10人天；\n激光技术部2人，现场飞行1天（王刚、朱倪强），2人天；\n司机2人，预计工作6人天。', NULL, '2022-02-22', 3880.00, 3880.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-22', '2022-02-23', '2022-03-01', NULL, NULL, '2022-03-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418857290520', NULL, '1', '国网西藏电力有限公司拉萨发电公司2022年第Y1次非物资竞争性谈判采购---2个项目中标服务费', 25, 105, '（1）国网拉萨发电公司2022年直孔大坝、羊湖压力钢管等定期变形监测及年度资料整编\n（2）国网西藏拉萨发电公司直孔电站变形监测控制网复测及工作基点校测', NULL, '2022-02-28', 27654.00, 27654.00, '已核，情况属实。', 13, '同意', 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-28', '2022-03-02', '2022-03-02', NULL, NULL, '2022-03-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418857300521', '1648881414259343361', '0', NULL, 83, 111, '1.该项目共投入3人（含司机），现场工作10日。\n2.因测区高差大我公司自有无人机无法完成作业，委外飞行队伍在现场的食宿由我们负责；\n3.因车辆皮带断裂，在现场进行了维修。', NULL, '2021-11-27', 9800.00, 8800.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-27', '2021-11-27', '2021-12-06', NULL, NULL, '2021-12-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418857310522', '1648881414527778817', '0', NULL, 83, 111, '因现场工作难度大于预期。现项目已完成，根据项目实际产生的开支补充申请借款。', NULL, '2021-11-27', 11778.00, 11778.00, '同意。', 83, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-27', '2021-11-27', '2021-12-06', NULL, NULL, '2021-12-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418857320523', '1648881414641025025', '0', NULL, 83, 111, '1.因增加测绘工作量1:1000横断面测量、吞白沟1:2000无人机航测、汗密电子沙盘飞行等任务，项目预计延期1月；\n2.受飞行空域、现场气象等因素影响，无人机数据采集超过了原计划工期；\n3.因项目周期延长，考虑项目所有参与人员轮休一次（含激光技术部人员），7人*2次；\n4.激光技术部现场飞行用车，油费有3500元含在第4项内。', NULL, '2021-12-27', 57880.00, 57880.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-27', '2021-12-29', '2021-12-30', NULL, NULL, '2022-01-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418857330524', NULL, '1', '车辆油费', 16, 104, '目前已垫付车辆油费7000元', NULL, '2022-01-21', 10000.00, 10000.00, '同意支付。', 112, '同意', 2, 2, '按需拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-25', '2022-01-26', '2022-01-26', NULL, NULL, '2022-01-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418857340525', NULL, '1', '一种基于自由设站归算算法的工程施工变形监测方法第一年度专利年费', 52, 109, '开户银行：中国农业银行股份有限公司成都蜀都支行\n户名:国家知识产权局专利局成都代办处\n帐号:229201010400233120000000001', NULL, '2022-02-28', 140.00, 140.00, '符合需求，同意借款。', 50, '同意。', 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-28', '2022-03-01', '2022-03-02', NULL, NULL, '2022-03-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418857350526', NULL, '1', '四川省测绘地理信息学会2022年会费', 52, 109, '开户名称：四川省测绘地理信息学会\n开户行：中国银行成都银都支行\n账户：1306 5874 9641\n联系电话 028-66065616', NULL, '2022-02-28', 13000.00, 13000.00, '符合需求，同意借款。', 50, '同意。', 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-28', '2022-03-01', '2022-03-02', NULL, NULL, '2022-03-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418857360527', '1648881413844107265', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2022年02月份现场作业成本支出，费用明细见下方Excel。', NULL, '2022-03-01', 13800.00, 13800.00, NULL, 101, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-01', '2022-03-07', '2022-03-08', NULL, NULL, '2022-03-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418857370528', '1648881413584060417', '0', NULL, 83, 111, '该项目投入人员3人（杨振、廖绍毅、周建伟），预计现场工作时间5天。', NULL, '2022-03-02', 3250.00, 3250.00, '同意。', 83, '同意借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-02', '2022-03-05', '2022-03-08', NULL, NULL, '2022-03-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418857380529', NULL, '1', '蜀南气矿新、改建管道测绘标书购买费', 25, 105, NULL, NULL, '2022-03-15', 200.00, 200.00, '已阅核，情况属实。', 13, '同意', 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-15', '2022-03-16', '2022-03-16', NULL, NULL, '2022-03-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418857390530', NULL, '1', '永善公路激光采集', 32, 107, '激光采集组已于3月13号进场作业', NULL, '2022-03-15', 7000.00, 7000.00, '情况属实', 32, '同意', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-15', '2022-03-15', '2022-03-16', NULL, NULL, '2022-03-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418857400531', NULL, '1', '邻水宅基地项目2021年11月', 59, NULL, '学生21日返校，用餐人数为折算值\n11月印刷费用暂未结算', NULL, '2021-12-05', 44300.00, 40000.00, '建议借款金额调整为40000.00元整。', 142, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-08', '2021-12-08', '2021-12-10', NULL, NULL, '2021-12-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418857410532', '1648881414276120578', '0', NULL, 83, 111, '该项目参与人员为丁亮、蒋剑虹、康科伟，现场工作时间为2日。', NULL, '2021-12-06', 1600.00, 1600.00, '情况属实，同意借款。', 83, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-06', '2021-12-07', '2021-12-07', NULL, NULL, '2021-12-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418857420533', NULL, '1', '西藏自治区草原确权登记工作培训', 112, 104, '本次参加培训人员：刘向东、杨为康、周强、许小飞\n转账信息如下：\n收款单位：西藏自然资源行业联合会\n收款账号：54050110205500001692\n开户银行：中国建设银行股份有限公司拉萨东城区支行', NULL, '2021-12-08', 4000.00, 4000.00, '同意。', 112, '同意', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-08', '2021-12-08', '2021-12-08', NULL, NULL, '2021-12-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418857430534', NULL, '1', '四川公司阿水公司绰斯甲水电站工程测量中心技术服务公开招标中标服务费', 23, 105, '实际金额106130.55元', NULL, '2021-12-20', 106130.60, 106130.60, '已核。', 13, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-21', '2021-12-22', '2021-12-22', NULL, NULL, '2021-12-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418857440535', NULL, '1', '新车购置款，购置税，保险。公司车辆保险及车辆燃油费', 16, 104, '现已垫付费用8万多，特申请借款，12月31日前冲账。', NULL, '2021-12-21', 80000.00, 80000.00, '情况属实。', 112, NULL, 2, 2, '按需支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-21', '2021-12-22', '2021-12-22', NULL, NULL, '2021-12-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418857450536', '1648881416641708034', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2021年12月份现场作业成本支出，本月涉及到监测控制网年度观测和墩标重新刷漆喷字等巩工作。费用明细见下方Excel。', NULL, '2021-12-21', 32700.00, 32700.00, NULL, 101, '情况属实，建议借支。', 10, 2, '同意上述意见，按需支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-21', '2021-12-27', '2021-12-27', NULL, NULL, '2021-12-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418857460537', NULL, '1', '浙江宁海抽水蓄能电站上下库库容曲线测量服务', 23, 105, '单位名称：宁波永耀电力投资集团有限公司招标咨询分公司\n银行账号：33150198423600000107\n开户银行：建行宁波望京支行	\n财务电话：0574-51105377/51105388\n传真：0574-51105522\n备注（综合服务-科技技术包1 中标服务费）', NULL, '2021-12-27', 2685.00, 2685.00, '已核。华东院项目，最终仍由华东院实施，以品牌输出方式与业主签订合同。（管理费10%）', 13, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-27', '2021-12-27', '2021-12-30', NULL, NULL, '2021-12-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418857470538', NULL, '1', '绰斯甲水电站测量中心合同谈判及现场踏勘', 13, 105, NULL, NULL, '2022-01-04', 20000.00, 0.00, '已核。', 13, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-01-04', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418857480539', '1648881413860884481', '0', NULL, 102, 112, '2022年1月二滩项目成本支出，增加办公用品采购费用40000元。', NULL, '2022-01-21', 74860.00, 74860.00, '未见办公设备采购清单明细，建议上传。', 101, '项目办公生活设备购置申请已审批，按不超过40000元控制。\n情况属实，建议借支。', 10, 2, '办公设备采购费用另行签批，生产费用按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-21', '2022-01-25', '2022-01-26', NULL, NULL, '2022-01-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418857490540', NULL, '1', '党务活动', 8, 104, '全公司党员学习大会', NULL, '2022-01-19', 10000.00, 10000.00, '同意。', 112, '同意', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-20', '2022-01-20', '2022-01-20', NULL, NULL, '2022-01-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418857500541', NULL, '1', '新进人员购商业保险', 8, 104, '公司名称: 泰康养老保险股份有限公司四川分公司。\n开户行: 工商银行盐市口支行\n账号:4402 9020 1910 0185 385', NULL, '2022-02-15', 6473.60, 6473.60, '拟同意。', 112, '同意', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-15', '2022-02-16', '2022-02-16', NULL, NULL, '2022-02-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418857510542', '1648881413709889537', '0', NULL, 83, 111, '该项目由杨为康、刘轩庭、熊艳华3人完成，预计现场工作时间4日。', NULL, '2022-02-16', 3040.00, 2620.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-16', '2022-02-16', '2022-02-16', NULL, NULL, '2022-02-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418857520543', NULL, '1', '新增人员意外保险', 8, 104, '公司名称: 泰康养老保险股份有限公司四川分公司。\n开户行: 工商银行盐市口支行\n账号:4402 9020 1910 0185 385', NULL, '2021-11-24', 1098.20, 1098.20, '同意。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-25', '2021-12-06', '2021-12-06', NULL, NULL, '2021-12-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418857530544', '1648881414137708545', '0', NULL, 61, 111, '1、本次借款为后补借款；\n2、项目参与人员3人（含驾驶员），工期3天；', NULL, '2021-12-03', 1500.00, 1500.00, '情况属实，建议借款。', 61, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-03', '2021-12-10', '2021-12-10', NULL, NULL, '2021-12-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418857540545', '1648881414154485761', '0', NULL, 61, 111, '1、参与工作4人（含租车司机），实际工期7天（含进出场）；\n2、现场租用车辆，车辆油费、驾驶员吃住由我们项目现场开支；\n3、以上借款按实际发生金额申请。', NULL, '2021-12-03', 13591.00, 13591.00, '情况属实，建议借款。', 61, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-03', '2021-12-09', '2021-12-10', NULL, NULL, '2021-12-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418857550546', '1648881414095765505', '0', NULL, 61, 111, '1、预计参加人员4人（含驾驶员），预计工期20天；\n2、现场需要租用机动船；\n3、其他备用金是预防项目预算不够或发生预算外费用；', NULL, '2021-12-03', 25000.00, 22400.00, '情况属实、预算合理，建议借款。', 61, '取消备用金项，建议借支22400元。', 10, 2, '按核准金额拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-03', '2021-12-09', '2021-12-10', NULL, NULL, '2021-12-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418857560547', '1648881414292897793', '0', NULL, 83, 111, '该项目参与人员为：丁亮、蒋剑虹、康科伟，现场工作时间为5日。', NULL, '2021-12-06', 3000.00, 3000.00, '情况属实，同意借款。', 83, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-06', '2021-12-06', '2021-12-06', NULL, NULL, '2021-12-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418857570548', '1648881419607080962', '0', NULL, 113, NULL, '南江农房登记项目项目部房租到期，计划再租借半年。费用5000元整。', NULL, '2021-12-09', 5000.00, 5000.00, '同意。', 142, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-09', '2021-12-09', '2021-12-10', NULL, NULL, '2021-12-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418857580549', '1648881414037045250', '0', NULL, 61, 111, '1、预计工期7天（不含进出场）；\n2、安排人员3人（含司机）；', NULL, '2021-12-14', 16500.00, 16500.00, '情况属实，建议借款。', 61, '卫片搜集费用，由杨卫代付。\n建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-14', '2021-12-15', '2022-01-10', NULL, NULL, '2022-01-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418857590550', '1648881414020268033', '0', NULL, 83, 111, '该项目参与人员为潘林海、蒋剑虹、康科伟。', NULL, '2021-12-19', 2596.00, 2596.00, '同意。', 83, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-19', '2021-12-20', '2021-12-21', NULL, NULL, '2021-12-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418857600551', '1648881415815430146', '0', NULL, 138, NULL, '借款用处：\n1、重庆轨道交通施工监测、三方监测、地下管网内窥项目人员日常生活开销、用车、项目人员部分工资，以及实习人员工资开销、施工监测协调费用、现场人员保险等费用7万元。\n2、南坪、北碚两个管网内窥项目，外协劳务队伍日常工作开展以及生活费用10万元。（备注：目前管网内窥外业已完成90公里左右）', NULL, '2021-12-20', 170000.00, 170000.00, '同意。', 142, NULL, 7, 2, '同意上述意见，按需支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-21', '2021-12-21', '2021-12-27', NULL, NULL, '2021-12-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418857610552', '1648881414372589569', '0', NULL, 83, 111, '该项目预计投入3人，预计现场工作5日。', NULL, '2021-12-24', 3010.00, 3010.00, '同意。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-24', '2021-12-29', '2021-12-30', NULL, NULL, '2022-01-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418857620553', NULL, '1', '专利申请费', 52, 109, '开户银行:中国农业银行股份有限公司成都蜀都支行\n户名:国家知识产权局专利局成都代办处\n账号：229201010400233120000000001', NULL, '2021-12-30', 1195.00, 1195.00, '情况属实。同意申请。', 46, '同意。', 9, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-30', '2021-12-30', '2021-12-30', NULL, NULL, '2021-12-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418857630554', '1648881419607080962', '0', NULL, 113, NULL, '项目部车辆使用费用。', NULL, '2022-01-27', 112000.00, 112000.00, '同意借款！', 20, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-27', '2022-01-27', '2022-02-07', NULL, NULL, '2022-02-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418857640555', NULL, '1', '2022年年会办理费用', 112, 104, '费用概算如下：\n餐费（午餐、晚餐）及棋牌费用约30000元；\n优秀团队及优秀员工现金奖励约70000元；\n现金抽奖约6000元；\n接待用酒约40000元；', NULL, '2022-01-20', 150000.00, 150000.00, '专款专用，合理开支。', 112, '同意', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-20', '2022-01-20', '2022-01-20', NULL, NULL, '2022-01-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418857650556', NULL, '1', '保函担保费用', 14, 101, '公司名称:成都中小企业融资担保有限责任公司\n开户行及账号:成都银行股份有限公司体育场路支行30022010218611500012', NULL, '2021-11-24', 30000.00, 30000.00, NULL, 14, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-11-24', '2021-11-24', '2021-11-24', NULL, NULL, '2021-11-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418857660557', '1648881416620736513', '0', NULL, 21, 105, '项目管理费', NULL, '2021-12-06', 43000.00, 43000.00, '已核，无异议。', 13, NULL, 7, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2021-12-06', '2021-12-06', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418857670558', '1648881414431309825', '0', NULL, 113, NULL, '南江抽水蓄能项目：目前正在完成外业调绘任务。其中飞行期间车辆油费使用1470，用餐成本为2030元，住宿成本为1114，其他成本为油漆，洗车，坐标转换费用。后期调绘人员预计20个工作日，现场住宿于生活成本预计到4400元。', NULL, '2021-12-07', 9014.00, 9014.00, '同意借款。', 20, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-07', '2021-12-07', '2021-12-07', NULL, NULL, '2021-12-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418857680559', NULL, '1', '仪陇县房屋和市政第一次全国自然灾害综合风险普查服务采购项目——标书购买费', 24, 105, '仪陇县房屋和市政第一次全国自然灾害综合风险普查服务采购项目标书购买费；须相关账户以对公账户缴纳费用200元；截止时间2021年12月27日。', NULL, '2021-12-27', 200.00, 200.00, '已核。', 13, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-27', '2021-12-27', '2021-12-27', NULL, NULL, '2021-12-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418857690560', '1648881416578793474', '0', NULL, 102, 112, '2022年临时工人意外险，需公对公转账购买，综合部协调，项目部办理。\n户名：泰康养老保险股份有限公司四川分公司\n账号：1000080004778685\n开户行：成都农村商业银行股份有限公司\n 联行号： 314651000000  ', NULL, '2022-01-06', 9600.00, 9600.00, NULL, 102, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-06', '2022-01-06', '2022-01-06', NULL, NULL, '2022-01-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418857700561', '1648881413927993346', '0', NULL, 113, NULL, '项目日常开支，其中36元为千寻账号。', NULL, '2022-01-17', 2016.00, 2016.00, '同意。', 142, '建议借支。', 10, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-18', '2022-01-18', '2022-01-18', NULL, NULL, '2022-01-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418857710562', '1648881413911216130', '0', NULL, 83, 111, '该项目预计投入3人，预计工天为24天。', NULL, '2022-01-17', 10760.00, 10760.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-18', '2022-02-15', '2022-02-16', NULL, NULL, '2022-02-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418857720563', NULL, '1', '飞马（D200S）2022年度保险', 17, 104, '购买飞马（D200S）2022年度保险，飞机编号为：DSFFCGLS19480130', NULL, '2022-02-15', 24500.00, 24500.00, '拟同意，并做好相应保单的归档事宜。', 112, '同意', 2, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-17', '2022-02-18', '2022-02-18', NULL, NULL, '2022-02-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418857730564', NULL, '1', '光纤费用', 18, 104, '预交2022年4月至2022年9月光纤费用，每月866元。金额合计5196元。转账，账号信息--收款方：中国移动通信集团四川有限公司成都分公司；开户银行：中国工商银行春熙路支行；账号：4402209009005411951。', NULL, '2022-02-23', 5196.00, 5196.00, '拟同意。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-23', '2022-03-01', '2022-03-01', NULL, NULL, '2022-03-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418857740565', NULL, '1', '飞马无人机（D2000）2022年度保险', 17, 104, '购买飞马无人机（D2000）2022年度保险，飞机型号为：D2000GLS21051080，相机型号为：D-OP300021050682\n\n转账公司名称：北京飞马航遥科技有限公司   开户银行：中国建设银行北京安慧支行 银行账号：11050186360000000463', NULL, '2022-02-23', 22400.00, 22400.00, '拟同意。 ', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-02-24', '2022-03-01', '2022-03-01', NULL, NULL, '2022-03-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418857750566', NULL, '1', '智联招聘平台服务合同', 8, 104, '开户行：招商银行成都分行顺城大街支行\n开户名称：北京猎聘咨询有限公司成都分公司\n账号：128910760410801', NULL, '2022-03-02', 5680.00, 5680.00, '同意。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-03', '2022-03-03', '2022-03-03', NULL, NULL, '2022-03-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418857760567', NULL, '1', '阿坝金川220kV变电站新建工程土地报件咨询服务项目中标代理服务费', 25, 105, NULL, NULL, '2022-03-04', 2662.00, 2662.00, '已阅核，已请合作单位将该费用交至财务，可支付。', 13, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-04', '2022-03-04', '2022-03-04', NULL, NULL, '2022-03-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418857770568', NULL, '1', '新建田师府至桓仁铁路DK69+125—DK69+352岩堆区域加固防护安全监测项目', 25, 105, '购买标书', NULL, '2022-03-21', 200.00, 200.00, '已核，情况属实。', 13, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-21', '2022-03-21', '2022-03-21', NULL, NULL, '2022-03-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418857780569', NULL, '1', '猴子岩水电站外部变形监测2022年（第1次）结算税金缴纳', 101, 112, '猴子岩水电站外部变形监测项目2022年（第1次）结算产值2944130.39元（大写：贰佰玖拾肆万肆仟壹佰叁拾元叁角玖分）（含往年变更费用），需在项目所在地缴纳增值税，本次结算费用甲方将于2022年04月支付合同款。', NULL, '2022-03-21', 240000.00, 240000.00, '同意。', 101, '已核，拟同意。', 13, 2, '按需拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-21', '2022-03-22', '2022-03-23', NULL, NULL, '2022-03-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418857790570', NULL, '1', '宜宾市叙州区林权档案电子化及存量数据整合建库采购项目中标服务费', 24, 105, '宜宾市叙州区林权档案电子化及存量数据整合建库采购项目（项目编号：511521202100044）中标服务费。', NULL, '2021-12-03', 30272.00, 30272.00, '已核，该费用协作单位已转交给公司，拟同意。', 13, NULL, 7, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-03', '2021-12-03', '2021-12-06', NULL, NULL, '2021-12-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418857800571', NULL, '1', 'ML水库电站测绘项目检查', NULL, 109, NULL, NULL, '2021-12-09', 22800.00, 22800.00, '符合需求，同意借款。', 50, '同意。', 9, 2, '按需拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2021-12-09', '2021-12-09', '2021-12-10', NULL, NULL, '2021-12-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418857810572', NULL, '1', '邻水宅基地项目2021年12月', 59, NULL, '第三项：购买2个4T移动硬盘备份资料\n第五项：12月聘请大量临时人员装档案袋（详见附表）\n第七项：12月大量印制装档所需资料（详见附表）', NULL, '2022-01-03', 88000.00, 88000.00, '同意按此金额借款。', 142, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-05', '2022-01-10', '2022-01-10', NULL, NULL, '2022-01-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418857820573', NULL, '1', '广州出差费用', 14, 106, NULL, NULL, '2022-01-04', 50000.00, 50000.00, NULL, 14, '同意', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-04', '2022-01-04', '2022-01-04', NULL, NULL, '2022-01-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418857830574', NULL, '1', '购买购物卡', 112, 104, NULL, NULL, '2022-01-11', 40000.00, 40000.00, '同意。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-11', '2022-01-11', '2022-01-11', NULL, NULL, '2022-01-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418857840575', '1648881414750076930', '0', NULL, 61, 111, '1、项目参与人员3人（含租车驾驶员）；\n2、现阶段主要是配合实物指标调查，预计工期15天；\n3、以上吃住成本参照亚龙项目实际单价；\n4、考虑冬季及路况，租用丰田越野车一辆，单价1000元/天，不含油费；\n5、租车油费因忠玉乡无加油站，油费会高于市场价格，以上单价参照亚龙项目时实际单价；', NULL, '2022-01-11', 32550.00, 32550.00, '情况属实，建议借款。', 61, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-11', '2022-01-12', '2022-01-14', NULL, NULL, '2022-01-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418857850576', '1648881415815430146', '0', NULL, 138, NULL, '本次借款申请用途：1、本年度项目租车未支付金额：23000元\n                              2、项目人员工资（不包含与总公司合同人员3人）20000元\n                              3、施工监测项目过年给监理、三方的商务费用15000\n                              4、施工监测城市道路钻孔给交警、城管部门的商务费用10000元\n                              5、重庆项目生产、生活费用50000元', NULL, '2022-01-20', 218000.00, 218000.00, '同意。', 142, '同意', 7, 2, '各分项借款须专款专用，财务部视该项目部工作经费需要进行拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-20', '2022-01-20', '2022-01-21', NULL, NULL, '2022-01-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418857860577', NULL, '1', '接待酒水相关费用', 112, 104, '费用概算：\n酒水费用支出约10万元；\n补充现金奖励约1万元；', NULL, '2022-01-25', 110000.00, 110000.00, '合理支配相关费用。', 112, '同意', 2, 2, '按需拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-25', '2022-01-26', '2022-01-26', NULL, NULL, '2022-01-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418857870578', '1648881413911216130', '0', NULL, 32, NULL, '空域申请费用', NULL, '2022-01-28', 20000.00, 20000.00, '同意', 32, '情况属实，建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-01-28', '2022-03-01', '2022-03-01', NULL, NULL, '2022-03-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418857880579', NULL, '1', '2022年信息体系(再认证)审费', 52, 109, '收款单位：北京中大华远认证中心有限公司四川分公司\n开户银行：中信银行股份有限公司成都武侯支行\n账 号：7413310182600013961', NULL, '2022-03-08', 28000.00, 28000.00, '符合需求，同意借款。', 50, '同意。', 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-08', '2022-03-10', '2022-03-11', NULL, NULL, '2022-03-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418857890580', '1648881413751832578', '0', NULL, 113, NULL, '住宿：间/天  2间*20天*150元/天，共计6000元；用餐成本：每人每天60*20天*3人，共计3600元；车辆加油5000元整，界桩制作，埋设，搬用预计每根300元，预计埋设170根，共计51000元。本次借款65600元。', NULL, '2022-03-22', 65600.00, 23600.00, '同意借款！', 20, '界桩制作安装暂按30点预算，待现场确认工作量后根据实际需要另行借支。\n建议借支23600元。', 10, 2, '同意按照23600元进行拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-22', '2022-03-28', '2022-03-28', NULL, NULL, '2022-03-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418857900581', '1648881413462425602', '0', NULL, 32, 107, '激光采集小组计划于2022年3月23日出发。', NULL, '2022-03-22', 8080.00, 8980.00, '同意', 32, '同意按8980元借款。', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-22', '2022-03-23', '2022-03-24', NULL, NULL, '2022-03-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418857910582', '1648881413860884481', '0', NULL, 102, 112, '3月项目开支，增加金龙山季度观测和二滩季度观测费用27860元。', NULL, '2022-03-24', 60864.00, 60864.00, '同意。', 101, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-24', '2022-03-28', '2022-03-28', NULL, NULL, '2022-03-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418857920583', NULL, '1', '喀什地区乡村规划测绘试点项目', 32, 107, '激光技术中心1人坐飞机提前去测区航空报备以及现场租车开展其他工作，另一人跟车出行，参与人员含司机一共三人。', NULL, '2022-07-08', 30300.00, 30300.00, '同意', 32, '同意', 11, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-08', '2022-07-08', '2022-07-12', NULL, NULL, '2022-07-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418857930584', '1648881413131075586', '0', NULL, 83, 111, '1.该项目前后共计开展47天（资料准备15日，现场工作32日），项目参与人员为：杨振、杨晶、张杰、夏志斌，租车司机次仁罗布；\n2.2022年3月11~3月14日，杨晶1人前往直孔测区查勘，共计4天；\n3.因在拉萨准备相关资料时未租用汽车，进场直孔测区时开始租用汽车；\n4.物资采购包含救生圈、救生衣、安全带、救生绳、急救箱（含药品）、警示牌等；\n5.资料装订为配合业主方准备相关资料，彩印、出版、装订等费用；\n6.两艘无人船进出场费用。无人船进场时采用物流进场，因A12无人船需返厂升级，故只能从拉萨发顺丰快递并保价15万至南京市智汇无人船公司。', NULL, '2022-07-08', 62310.00, 54790.00, '同意。', 83, '建议借支。', 10, 2, '同意，请核算一下该项目进行和出项之比例。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-08', '2022-07-11', '2022-07-12', NULL, NULL, '2022-07-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418857940585', '1648881414490030081', '0', NULL, 138, NULL, '此次借款用于北碚、南坪管网内窥项目外协劳务费用阶段支付。', NULL, '2022-03-31', 100000.00, 100000.00, '同意。', 142, '同意', 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-01', '2022-04-01', '2022-04-02', NULL, NULL, '2022-04-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418857950586', '1648881413311430658', '0', NULL, 32, 107, '激光采集小组计划4月3号进场', NULL, '2022-04-01', 7650.00, 7650.00, NULL, 32, '同意', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-01', '2022-04-02', '2022-04-02', NULL, NULL, '2022-04-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418857960587', NULL, '1', '人身意外伤害险（4人）', 8, 104, '公司名称: 泰康养老保险股份有限公司四川分公司。\n开户行: 工商银行盐市口支行\n账号:4402 9020 1910 0185 385', NULL, '2022-04-27', 3236.80, 3236.80, '情况属实。', 112, '同意', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-27', '2022-04-27', '2022-04-27', NULL, NULL, '2022-04-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418857970588', '1648881413244321794', '0', NULL, 71, 111, NULL, NULL, '2022-04-29', 6500.00, 6500.00, '情况属实，同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-29', '2022-05-05', '2022-05-06', NULL, NULL, '2022-05-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418857980589', NULL, '1', '备用金', 112, 104, '公司接待及其他开支，申请备用金20000元。', NULL, '2022-05-06', 20000.00, 20000.00, '同意。', 112, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-06', '2022-05-06', '2022-05-07', NULL, NULL, '2022-05-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418857990590', NULL, '1', '邻水宅基地项目2022年4月补', 59, NULL, '按工作量，和当地临时工同标准结算，晚上加班', NULL, '2022-05-16', 12420.00, 12420.00, '同意。', 142, '同意', 11, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-17', '2022-05-17', '2022-06-06', NULL, NULL, '2022-06-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418858000591', NULL, '1', '中国采招网会员费（一年）', 26, 105, '我公司注册的中国采招网会员已到期，现需续缴会员费，金额为：陆仟陆佰捌拾捌元（&yen;6688.00元）', NULL, '2022-05-24', 6688.00, 6688.00, '已核，情况属实。', 13, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-24', '2022-05-24', '2022-05-25', NULL, NULL, '2022-05-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418858010592', '1648881413412093953', '0', NULL, 61, 111, '1、本次借款为补充借款，项目一垫资约6500元；\n2、目前现场8人（含司机2人）；越野车2台；\n3、根据目前工作进度，按现有人员配置，预计还需要工期25天；\n4、测区补飞工作，飞行组4人，预计工期5天（含进出场）；\n5、燃油费按150元/车/天预算；\n6、后期根据实际情况增补借款；', NULL, '2022-05-23', 58750.00, 47750.00, '同意。情况属实。', 83, '建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-23', '2022-05-27', '2022-05-30', NULL, NULL, '2022-06-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418858020593', NULL, '1', '新进人员购商业保险', 8, 104, '账号:1000080004778685\n开户行:成都农村商业银行股份有限公司\n户名:泰康养老保险股份有限公司四川分公司', NULL, '2022-11-14', 2902.17, 2902.17, '同意', 112, '同意。', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-14', '2022-11-14', '2022-11-14', NULL, NULL, '2022-11-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418858030594', '1648881412153802753', '0', NULL, 83, 111, '补飞DOM，测绘工程中心投入2人，租车司机一人。因现场天气不好，持续降雨，现场工作5日。', NULL, '2022-11-15', 6000.00, 6000.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-15', '2022-11-16', '2022-11-21', NULL, NULL, '2022-11-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418858040595', NULL, '1', 'ML水库电站及JW梯级水电站测绘技术服务合同履约保费', 14, 106, '担保费1%，担保期间半年', NULL, '2022-07-12', 14932.00, 14932.00, NULL, 14, '同意。', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-12', '2022-07-12', '2022-07-12', NULL, NULL, '2022-07-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418858050596', '1648881412795531265', '0', NULL, 33, 110, '一辆车、3个人员、激光飞行+调绘。', NULL, '2022-06-21', 2000.00, 2000.00, '同意借款', 33, '情况属实，建议借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-21', '2022-06-23', '2022-06-24', NULL, NULL, '2022-06-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418858060597', NULL, '1', '飞马无人机（D2000S），飞马D-LIDAR2000的2022年度保险', 17, 104, '此台飞马无人机（D2000S）为2022年6月22日保险理赔新飞机，被保险飞机编号：D2000STJ22210255，被保险雷达编号：D-LIDAR200022160350\n转账公司名称：北京飞马航遥科技有限公司   开户银行：中国建设银行北京安慧支行 银行账号：11050186360000000463', NULL, '2022-06-22', 21500.00, 21500.00, '情况属实。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-23', '2022-06-24', '2022-06-24', NULL, NULL, '2022-06-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418858070598', '1648881413860884481', '0', NULL, 102, 112, '二滩项目部6月成本开支。', NULL, '2022-06-22', 29040.00, 29040.00, NULL, 101, '已审核，拟同意。监测项目采用总额控制，分次借支，请项目负责人下月将该项目预估年度结算总金额附上（含每月已借支情况）。', 13, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-23', '2022-06-24', '2022-06-24', NULL, NULL, '2022-06-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418858080599', NULL, '1', '成都人才培训', 18, 104, '收款人：成都人才有限责任公司\n收款账号：5100 1446 4080 5150 0791\n开户行：中国建设银行股份有限公司成都金仙桥支行', NULL, '2022-06-23', 580.00, 580.00, '拟同意。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-23', '2022-06-24', '2022-06-24', NULL, NULL, '2022-06-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418858090600', NULL, '1', '咨询费', 14, 106, NULL, NULL, '2022-03-24', 4450.00, 4450.00, NULL, 14, '同意', 2, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-24', '2022-03-25', '2022-03-25', NULL, NULL, '2022-03-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418858100601', '1648881415815430146', '0', NULL, 138, NULL, '此次借款用于三方监测、施工监测、管网内窥项目人员现场生产、生活、以及现场实习人员绩效工资，车辆租赁等开销。', NULL, '2022-03-25', 50000.00, 50000.00, '同意按此金额借款。', 142, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-25', '2022-03-28', '2022-03-28', NULL, NULL, '2022-03-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418858110602', NULL, '1', '担保费', 14, 106, '新建田师附至恒仁铁路DK69+125-DK69+352岩堆区域加固防护安全监测项目投标保函担保费', NULL, '2022-03-28', 800.00, 800.00, NULL, 14, '同意', 2, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-28', '2022-03-28', '2022-03-28', NULL, NULL, '2022-03-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418858120603', '1648881413483397121', '0', NULL, 61, 111, '1、目前项目安排人员3人（含驾驶员）；\n2、预计工期20天；\n3、因测区交通困难，需要预算民工费用；\n4、费用为预算费用，后期根据实际情况增补。', NULL, '2022-03-28', 20000.00, 20000.00, '情况属实，同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-02', '2022-04-07', '2022-04-08', NULL, NULL, '2022-04-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418858130604', NULL, '1', '备用金申请', 112, 104, '由于近期必要开支较多，上次备用金已用完，请领导批准。', NULL, '2022-05-12', 20000.00, 20000.00, '同意。', 112, '同意。', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-12', '2022-05-13', '2022-05-13', NULL, NULL, '2022-05-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418858140605', '1648881413181407233', '0', NULL, 32, 107, '现场外业调绘需要租车，住宿用餐成本按4人12天计划。', NULL, '2022-05-07', 20100.00, 20100.00, '作业人员5月8号进场。', 32, '同意', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-07', '2022-05-09', '2022-05-13', NULL, NULL, '2022-05-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418858150606', NULL, '1', '邻水农经权项目2022年5月', 59, NULL, '部分开支产生在4月，如租房、用车，耗材采购。', NULL, '2022-05-16', 18300.00, 18300.00, '同意。', 142, '同意', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-16', '2022-05-16', '2022-05-17', NULL, NULL, '2022-05-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418858160607', NULL, '1', '水利水电测绘信息网2022年度网费', 52, 109, '单位：长江空间信息技术工程有限公司(武汉）\n开户银行：建行武汉水利支行\n账号：42001116256053000365', NULL, '2022-05-17', 10000.00, 10000.00, '符合需求，同意借款。', 50, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-18', '2022-05-19', '2022-05-25', NULL, NULL, '2022-05-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418858170608', NULL, '1', '医保专题培训', 8, 104, '单位名称：成都人才有限责任公司\n开户行账号：5100 1446 4080 5150 0791\n开户行：中国建设银行股份有限公司成都金仙桥支行', NULL, '2022-05-18', 580.00, 580.00, '拟同意。', 112, '同意。', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-18', '2022-05-25', '2022-05-25', NULL, NULL, '2022-05-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418858180609', '1648881413860884481', '0', NULL, 102, 112, '二滩项目5月开支，增加金龙季度观测24500。', NULL, '2022-05-24', 53540.00, 53540.00, '已核。', 101, '已核，金龙山季度观测为相关劳务、赔偿费用，拟同意。', 13, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-24', '2022-05-26', '2022-05-30', NULL, NULL, '2022-06-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418858190610', '1648881412753588225', '0', NULL, 63, NULL, '测图及城乡建设分公司测绘作业服务', NULL, '2022-06-20', 6400.00, 6400.00, '情况属实。', 20, '情况属实，建议借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-20', '2022-06-20', '2022-06-24', NULL, NULL, '2022-06-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418858200611', '1648881415815430146', '0', NULL, 138, NULL, '商务成本：锦绣山庄小区地面沉降点钻孔押金10000元，小区管理费5000元，小区物管协调红包2000元；市政道路钻孔红包3000元。\n仪器检定费用：施工监测用水位计、读数仪、测斜仪检定费2800元。\n其他费用：包含现场人员生活生产费用、两套房水、电、气、物管、网费，租车部分费用，燃油费、2名实习人员工资，一名做饭人员工资，合计40000元。\n注：中水德方帮忙签正式合同共两名员工，以及二名实习生，工资费用由中水德方发放。', NULL, '2022-06-27', 62800.00, 62800.00, '情况属实。', 20, '已核实，签定合同时要考虑商务协调费用', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-27', '2022-06-27', '2022-06-28', NULL, NULL, '2022-07-01');
INSERT INTO `cmc_borrow` VALUES ('1648881418858210612', '1648881413844107265', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2022年06月份现场作业成本支出，费用明细见下方Excel。', NULL, '2022-06-30', 16500.00, 16500.00, '猴子岩水电站外部变形监测项目根据猴子岩公司（甲方）的延期要求：再次延期至2022年12月31日，合同工作内容继续延期现阶段工作内容。 2022年12月13日后将终止本合同，不在延续，2023年以后的外部变形监测项目将于本年度四季度启动招标工作。', 101, '已核，拟同意。', 13, 2, '同意拨付.', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-30', '2022-06-30', '2022-07-04', NULL, NULL, '2022-07-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418858220613', NULL, '1', '2021年度全国国土变更调查成果国家级核查及监理报名费', 23, 105, '共10个包，320元/包，标书报名费 2022年3月28日报名截止，付款请备注：2021年度全国国土变更调查成果国家级核查及监理报名费（1-10包）', NULL, '2022-03-25', 3200.00, 3200.00, '已核，情况属实。', 13, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-25', '2022-03-25', '2022-03-25', NULL, NULL, '2022-03-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418858230614', NULL, '1', '邻水宅基地项目2022年4月', 59, NULL, NULL, NULL, '2022-03-27', 13000.00, 13000.00, '同意。', 142, '同意', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-29', '2022-03-30', '2022-04-02', NULL, NULL, '2022-04-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418858240615', NULL, '1', '人身意外伤害险（12人）', 8, 104, '户名：泰康养老保险股份有限公司四川分公司\n账号：1000080004778685\n开户行：成都农村商业银行股份有限公司\n 联行号： 314651000000', NULL, '2022-03-28', 3600.00, 3600.00, '拟同意。', 112, '同意', 2, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-28', '2022-03-29', '2022-03-29', NULL, NULL, '2022-03-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418858250616', '1648881413529534465', '0', NULL, 113, NULL, '车辆加油费：项目需要从自贡拉船，前往测区，预计公里数为2000公里，单价1元/公里，共计2000元；住宿成本：4人两间房，120元每间/每晚，预计需要住3晚，合计720元；用餐成本：每人每天60元，共四人四天，合计960元。租船：3000元，包含一名技术人员费用。', NULL, '2022-03-30', 6680.00, 6680.00, '同意。', 142, '同意', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-31', '2022-03-31', '2022-04-02', NULL, NULL, '2022-04-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418858260617', '1648881413114298369', '0', NULL, 83, 111, '该项目投入3人，现场工作时间为2天。', NULL, '2022-05-27', 1660.00, 1660.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-27', '2022-05-27', '2022-05-30', NULL, NULL, '2022-06-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418858270618', '1648881414926237697', '0', NULL, 61, 111, '1、本次借款为项目完成后的补充借款；\n2、本次借款主要是现场水下地形测绘增加成本；\n3、前期开支结余9269.51，本次水下地形测量现场实际开支23742元（含租用船只成本5500元）；', NULL, '2022-04-17', 14500.00, 14500.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意该补充借款，须合理控制项目成本。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-17', '2022-04-21', '2022-04-24', NULL, NULL, '2022-04-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418858280619', NULL, '1', '西藏昌都地区抽水蓄能电站现场踏勘', 63, NULL, '现场踏勘工作由西藏公司牵头，交通及伙食由西藏解决，主要费用为进出场机票及现场住宿费用', NULL, '2022-04-18', 9600.00, 9600.00, '同意借款。', 20, '同意', 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-18', '2022-04-18', '2022-04-19', NULL, NULL, '2022-04-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418858290620', NULL, '1', '新车购置税、保险、座位更改费用', 16, 104, '新车购置税13000，保险4500，座位更改6200.', NULL, '2022-04-24', 23800.00, 23800.00, '情况属实，同意借款。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-24', '2022-04-26', '2022-04-26', NULL, NULL, '2022-04-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418858300621', NULL, '1', '苏交科平台认证费用', 26, 105, NULL, NULL, '2022-07-12', 0.01, 0.01, '已核，拟同意。', 13, '同意', 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-13', '2022-07-13', '2022-07-14', NULL, NULL, '2022-07-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418858310622', '1648881412648730625', '0', NULL, 84, 110, NULL, NULL, '2022-07-12', 300.00, 300.00, NULL, 33, '建议借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-14', '2022-07-15', '2022-07-19', NULL, NULL, '2022-07-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418858320623', '1648881412665507842', '0', NULL, 83, 111, '该项目由廖绍毅、黄建春、康科伟3人参与。预计现场工作8日。', NULL, '2022-07-12', 4910.00, 4910.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-12', '2022-07-14', '2022-07-14', NULL, NULL, '2022-07-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418858330624', NULL, '1', '川A0T282、川A5U91Q保险及车辆加油费用', 16, 104, NULL, NULL, '2022-07-13', 20000.00, 20000.00, '拟同意。', 112, '同意', 2, 2, '可以拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-13', '2022-07-14', '2022-07-14', NULL, NULL, '2022-07-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418858340625', NULL, '1', '申请备用金', 112, 104, '申请备用金20000元整，请领导批准。', NULL, '2022-03-25', 20000.00, 20000.00, '同意。', 112, '同意', 2, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-25', '2022-03-28', '2022-03-28', NULL, NULL, '2022-03-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418858350626', NULL, '1', '北京中大华远认证中心4.11-15日 管理体系内审员培训', 50, 109, NULL, NULL, '2022-04-07', 7200.00, 7200.00, '符合需求，同意借款。', 50, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-07', '2022-04-07', '2022-04-08', NULL, NULL, '2022-04-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418858360627', NULL, '1', '新增人员意外保险', 8, 104, '户名：泰康养老保险股份有限公司四川分公司\n账号：1000080004778685\n开户行：成都农村商业银行股份有限公司\n 联行号： 314651000000', NULL, '2022-04-11', 4103.80, 4103.80, '拟同意。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-11', '2022-04-19', '2022-04-19', NULL, NULL, '2022-04-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418858370628', '1648881413860884481', '0', NULL, 102, 112, '4月项目支出，离职人员预结算费包含2人费用，靳德明14000元，何勇56000元。', NULL, '2022-04-23', 102504.00, 102504.00, '同意。靳德明工时费结算费用时间段为2021年1月～2021年5月,共计14000元（含2020年5000元质保金）。何勇工时费结算费用时间段为2020年1月～2022年4月,共计56000元。', 101, '已核，拟同意按此金额支付。', 13, 2, '上述意见已阅，尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-23', '2022-04-25', '2022-04-26', NULL, NULL, '2022-04-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418858380629', '1648881415815430146', '0', NULL, 138, NULL, '此次借款用于，重庆轨道交通四号线西延线三方监测、施工监测，地下管网内窥现场实习人员工资、车辆部分租赁费用、生活、房租等开支。注：1、其中6000元用于北碚管网内窥新增工作量外委费用。2、施工监测：一小区需要钻孔，通过协商需要缴纳押金10000元和10000元管理费。', NULL, '2022-04-27', 76000.00, 76000.00, '情况属实，同意借款。', 20, '已核实情况，同意借款。', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-28', '2022-04-28', '2022-04-28', NULL, NULL, '2022-04-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418858390630', NULL, '1', '成都市交通规划勘察设计研究院有限公司2022年新增供应商入库', 23, 105, '（账户名称：成都市交通规划勘察设计研究院有限公司、 开户银行：成都银行洗面桥支行、银行账号：03042010202760400019。注：需备注为本项目相应标段比选文件购买费）。备注：成都市交通规划勘察设计研究院有限公司2022年新增供应商入库二标段比选文件购买费', NULL, '2022-04-28', 200.00, 200.00, '已核，无异议。', 13, NULL, 7, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-28', '2022-04-28', '2022-04-28', NULL, NULL, '2022-04-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418858400631', NULL, '1', '新增人员意外保险', 8, 104, '公司名称: 泰康养老保险股份有限公司四川分公司。\n开户行: 工商银行盐市口支行\n账号:4402 9020 1910 0185 385', NULL, '2022-04-28', 809.20, 809.20, '拟同意。', 112, '同意', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-28', '2022-04-29', '2022-04-29', NULL, NULL, '2022-04-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418858410632', NULL, '1', '参加信息安全内审员培训', 39, 108, '按公司技术质量部要求参加信息安全内审员培训，培训费借款直接打到对方账号，培训完成后拿发票回公司冲借款。\n\n开户单位：成都中远恒信企业管理有限责任公司\n开户银行：中国工商银行成都市滨江支行\n账    号：4402204009024545227\n汇款用途：培训费', NULL, '2022-05-07', 4000.00, 4000.00, '按照公司要求参加信息安全内审员培训，以进一步完善公司信息安全管理体系和管理水平。', 39, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-07', '2022-05-07', '2022-05-13', NULL, NULL, '2022-05-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418858420633', '1648881413164630018', '0', NULL, 71, 111, NULL, NULL, '2022-05-12', 6740.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418858430634', '1648881414410338305', '0', NULL, 71, 111, NULL, NULL, '2022-05-12', 2040.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418858440635', '1648881413164630018', '0', NULL, 83, 111, '该项目参与人员4人，预计现场工作8日。', NULL, '2022-05-12', 5540.00, 5340.00, '同意。', 83, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-12', '2022-05-16', '2022-05-17', NULL, NULL, '2022-05-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418858450636', NULL, '1', '国网西藏拉萨发电公司羊湖电站压力钢管永久变形监测沉降水准工作基点改造项目', 25, 105, '中标代理服务费', NULL, '2022-05-31', 9480.00, 9480.00, '已核，无异议。', 21, NULL, 7, 2, '同意，尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-31', '2022-06-02', '2022-06-06', NULL, NULL, '2022-06-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418858460637', '1648881412845862913', '0', NULL, 33, 110, '1、飞行3人，\n2、控制调绘4人，\n3、一辆车，\n4、坐标转换费用为通过测绘局转换控制测区的高程点，制作转换模型。', NULL, '2022-06-14', 15600.00, 15600.00, '同意', 33, '车辆为激光采集、常规外业各一辆。\n情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-14', '2022-06-14', '2022-06-15', NULL, NULL, '2022-06-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418858470638', '1648881413844107265', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2022年03月份现场作业成本支出，费用明细见下方Excel。', NULL, '2022-04-01', 11550.00, 11550.00, NULL, 101, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-01', '2022-04-01', '2022-04-02', NULL, NULL, '2022-04-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418858480639', '1648881413412093953', '0', NULL, 61, 111, '1、借款暂时不考虑控制工作开展部分；\n2、无人机飞行组4人（含驾驶员），预计工期15天；\n3、断面及水下地形组计划4人（含驾驶员），预计工期30；\n4、调绘及检查点组2人，预计工期15天；\n5、此次借款为部分预算借款，后期根据实际情况增补；', NULL, '2022-04-02', 44550.00, 44550.00, '情况属实，同意借款。', 83, '情况属实，建议根据现场实际开支需要，分批借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-02', '2022-04-08', '2022-04-19', NULL, NULL, '2022-04-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418858490640', NULL, '1', '一种野外测绘专用帽（专利号202123342546.X）专利年费', 52, 109, '开户银行：中国农业银行股份有限公司成都蜀都支行\n户名：国家知识产权局专利局成都代办处\n账号：229201010400233120000000001', NULL, '2022-04-06', 95.00, 95.00, '符合需求，同意借款。', 50, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-07', '2022-04-07', '2022-04-08', NULL, NULL, '2022-04-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418858500641', '1648881413844107265', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2022年07月份现场作业成本支出，费用明细见下方Excel。', NULL, '2022-08-02', 25300.00, 25300.00, NULL, 101, '同意借款。', 13, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-02', '2022-08-04', '2022-08-08', NULL, NULL, '2022-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418858510642', '1648881414641025025', '0', NULL, 83, 111, '因墨脱测区降雨、林芝测区下午起风、水准测量难度超出预期（高差起伏太多，观测进度慢；存在观测超限、返工等情况）等影响造成项目延期。', NULL, '2022-05-23', 49900.00, 49900.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-23', '2022-05-27', '2022-05-30', NULL, NULL, '2022-06-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418858520643', '1648881413093326850', '0', NULL, 113, NULL, '住宿成本：两间房，两晚，每间预计200元，共计800元；用餐成本：每人每天60元，共计四人，三天，共计720元；车辆加油费：单程500余公里，往返兼测区加油预计2000元整；租船：租用华测船一艘，含技术人员一名，不开票6000元，开票费用预计400元。千寻账号一天，两个账号，共计36元。综上合计借款9956。', NULL, '2022-05-23', 9956.00, 9956.00, '情况属实，同意借款。', 20, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-23', '2022-05-24', '2022-05-25', NULL, NULL, '2022-05-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418858530644', '1648881413114298369', '0', NULL, 71, 111, NULL, NULL, '2022-05-24', 1660.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418858540645', '1648881413844107265', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2022年05月份现场作业成本支出，费用明细见下方Excel。', NULL, '2022-05-27', 16300.00, 16300.00, NULL, 101, '拟同意。', 13, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-27', '2022-05-27', '2022-05-30', NULL, NULL, '2022-06-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418858550646', '1648881412946526209', '0', NULL, 61, 111, '1、飞行组3人（含驾驶员）、一台车，实际工期5天（含进出场）；\n2、地面组3人（含驾驶员）、一台车，实际工期9天（含进出场）；\n3、坐标转换费为通过测绘局转换控制测区的高程点，制作转换模型；\n4、测区平均海拔约4300m，住宿地海拔约4150，属高原地区，采集常备高原药品；\n5、本次借款项目完成后的实际借款；', NULL, '2022-06-04', 9340.00, 9000.00, '情况属实。', 83, '情况属实，建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-07', '2022-06-18', '2022-06-24', NULL, NULL, '2022-06-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418858560647', NULL, '1', '担保费', 14, 101, '本次贷款额度8000000.00元，担保费2%。', NULL, '2022-06-10', 160000.00, 160000.00, '同意', 14, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-10', '2022-06-10', '2022-06-10', NULL, NULL, '2022-06-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418858570648', '1648881414976569346', '0', NULL, 61, 111, '1、2022年7月开展1:2000地形图权属及地类调绘变更工作；\n2、现场实际发生成本4033元，本次补充借款按实际发生申请；\n3、现场参与人员3人（含司机），实际工期8天（含进出场）；', NULL, '2022-08-01', 4033.00, 4033.00, '情况属实，同意借款。', 83, '情况属实。建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-02', '2022-08-04', '2022-08-05', NULL, NULL, '2022-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418858580649', '1648881413500174338', '0', NULL, 32, 107, '计划4月20日进场补调，按3人10天计划。', NULL, '2022-04-18', 8000.00, 6600.00, '情况属实，同意', 32, '同意', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-18', '2022-04-18', '2022-04-19', NULL, NULL, '2022-04-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418858590650', '1648881413344985090', '0', NULL, 109, 112, '1、人员进出场费用含机票及来往直孔电站的费用，人员为马如坤、高强、刘庆波等三人。\n2、生活成本按每人90元一天，按3人30天计算。\n3、住宿按2个房间，每间150元，按30天计算。\n4、现场聘用民工，按220元一天，按3人10天计算。', NULL, '2022-04-01', 56200.00, 54700.00, '同意', 101, '同意', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-01', '2022-04-06', '2022-04-06', NULL, NULL, '2022-04-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418858600651', '1648881413844107265', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2022年04月份现场作业成本支出，费用明细见下方Excel。', NULL, '2022-05-05', 12800.00, 12400.00, NULL, 101, '已核，建议按12400.00元借支。', 13, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-05', '2022-05-05', '2022-05-06', NULL, NULL, '2022-05-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418858610652', '1648881413147852802', '0', NULL, 83, 111, '本项目参与人员为廖绍毅、黄建春。预计现场工作15天；\n现场乘坐甲方的车辆。', NULL, '2022-05-11', 14600.00, 14600.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-11', '2022-05-13', '2022-05-17', NULL, NULL, '2022-05-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418858620653', NULL, '1', '人事档案管理专题培训', 8, 104, '转账单位名称：成都人才有限责任公司\n开户行账号：5100 1446 40805 1500 791\n开户行：中国建设银行股份有限公司成都金仙桥支行', NULL, '2022-05-30', 580.00, 580.00, '拟同意。', 112, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-01', '2022-06-06', '2022-06-06', NULL, NULL, '2022-06-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418858630654', NULL, '1', '中国电信企业组网服务合同', 112, 104, '公司IP电话改签、预存1个月电话费用合计7540.00元。\n转账信息：\n开户银行：工行春熙支行营业厅\n账户名称：中国电信股份有限公司成都分公司\n银行账号：4402209029005401812', NULL, '2022-06-08', 7540.00, 7540.00, '情况属实。', 112, '同意', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-08', '2022-06-10', '2022-06-10', NULL, NULL, '2022-06-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418858640655', '1648881418034216962', '0', NULL, 55, 109, '预计5天，三人同行。', NULL, '2022-06-15', 4000.00, 4000.00, '符合需求，同意借款。', 50, '同意借款', 11, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-15', '2022-06-17', '2022-06-24', NULL, NULL, '2022-06-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418858650656', '1648881419607080962', '0', NULL, 11, 102, NULL, NULL, '2022-06-16', 200000.00, 200000.00, NULL, NULL, '同意', 11, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, NULL, '2022-06-16', '2022-06-16', NULL, NULL, '2022-06-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418858660657', '1648881412774559745', '0', NULL, 101, 112, '测区位置不通车，仅能步行进入。暂时参与人员3人（含司机），人员进场后在根据实际情况考虑后期是否增加人员。', NULL, '2022-06-20', 17750.00, 17750.00, NULL, 101, '建议借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-20', '2022-06-23', '2022-06-24', NULL, NULL, '2022-06-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418858670658', '1648881414750076930', '0', NULL, 83, 111, '该项目由廖绍毅负责进行现场委外管理。全程负责本项目实施期间的安全、质量、进度管理工作。', NULL, '2022-03-16', 26050.00, 16500.00, '同意。', 83, '鉴于测区偏远、交通不便等实际情况，暂按6天租车预算。同意借支16500元。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-16', '2022-03-17', '2022-03-21', NULL, NULL, '2022-03-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418858680659', NULL, '1', '光纤费用', 18, 104, '光纤扩容，预交2022年4月至2022年9月新增光纤费用，每月268元。金额合计1608元。转账，账号信息--收款方：中国移动通信集团四川有限公司成都分公司；开户银行：中国工商银行春熙路支行；账号：4402209009005411951。', NULL, '2022-03-18', 1608.00, 1608.00, '同意。', 112, '同意', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-18', '2022-03-21', '2022-03-21', NULL, NULL, '2022-03-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418858690660', NULL, '1', 'CMA 认证审核费用', 52, 109, '3.24专家现场审核，特申请审核费用。', NULL, '2022-03-21', 10000.00, 10000.00, '符合需求，同意借款。', 50, '同意。', 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-03-21', '2022-03-21', '2022-03-23', NULL, NULL, '2022-03-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418858700661', NULL, '1', '2021年度全国国土变更调查成果国家级核查及监理（第10包）', 23, 105, '公司名称：中经信非融资性担保有限公司\n开户行：民生银行北京朝阳北路支行\n账号：632400386\n行号：305100001539\n转账备注：BJ02-2202003-10服务费', NULL, '2022-04-14', 16576.00, 16576.00, '已核，该费用由我公司先期垫付，后期由合同款扣留。', 13, NULL, 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-14', '2022-04-18', '2022-04-19', NULL, NULL, '2022-04-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418858710662', NULL, '1', '贷款担保费', 14, 106, '担保费：本次贷款800万，担保费用2%，共计160000.00元', NULL, '2022-06-10', 160000.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418858720663', NULL, '1', '备用金申请', 112, 104, '备用金申请，用于商务接待等开支。', NULL, '2022-06-13', 20000.00, 20000.00, '同意。', 112, '同意', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-13', '2022-06-15', '2022-06-15', NULL, NULL, '2022-06-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418858730664', NULL, '1', '四川省地理信息产业协会2022年度会费', 52, 109, '户名：四川省地理信息产业协会\n开户行：中信银行成都紫荆支行\n账号：8111 0010 1330 0013 443\n备注内容：会费', NULL, '2022-06-16', 14000.00, 14000.00, '符合需求，同意借款。', 50, '同意。', 9, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-16', '2022-06-17', '2022-06-24', NULL, NULL, '2022-06-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418858740665', '1648881418239737858', '0', NULL, 11, 102, NULL, NULL, '2022-06-16', 160000.00, 160000.00, NULL, NULL, '同意', 11, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, NULL, '2022-06-16', '2022-06-16', NULL, NULL, '2022-06-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418858750666', '1648881412845862913', '0', NULL, 33, 110, '南桠光伏场址，地点是石棉，5个人，一辆车，预计5天。', NULL, '2022-07-01', 4750.00, 4750.00, '同意', 33, '同意。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-01', '2022-07-01', '2022-07-04', NULL, NULL, '2022-07-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418858760667', '1648881412682285058', '0', NULL, 83, 111, '该项目由杨振、杨晶、张杰、夏志斌4人承担，预计项目工期为20日。\n因本项目1:2000区域位于高山区，需徒步上山。了解到现场可能有野兽出没，需聘请当地向导陪同。', NULL, '2022-07-02', 51000.00, 51000.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-02', '2022-07-05', '2022-07-12', NULL, NULL, '2022-07-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418858770668', NULL, '1', '备用金', 112, 104, '上次申请的备用金已用完。请领导批准。', NULL, '2022-07-05', 20000.00, 20000.00, '同意。', 112, '同意', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-05', '2022-07-12', '2022-07-12', NULL, NULL, '2022-07-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418858780669', NULL, '1', '购买反光背心', 58, 104, '京东自营店购买反光背心100件', NULL, '2022-07-05', 3800.00, 3800.00, '拟同意。', 112, '同意', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-05', '2022-07-12', '2022-07-12', NULL, NULL, '2022-07-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418858790670', NULL, '1', ' 北京中大华远认证中心三体系2022认证费用', 52, 109, '收款单位：北京中大华远认证中心有限公司四川分公司\n开户银行：中信银行股份有限公司成都武侯支行\n账 号：7413310182600013961', NULL, '2022-07-05', 18000.00, 18000.00, '符合需求，同意借款。', 50, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-06', '2022-07-11', '2022-07-12', NULL, NULL, '2022-07-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418858800671', NULL, '1', '猴子岩水电站外部变形监测2022年（第2次）结算税金缴纳', 101, 112, '猴子岩水电站外部变形监测项目2022年（第2次）结算产值1794310.42元（大写：壹佰柒拾玖万肆仟叁佰壹拾元肆角贰分），需在项目所在地缴纳增值税，本次结算费用甲方将于2022年08月支付合同款。', NULL, '2022-07-07', 70000.00, 70000.00, NULL, 101, '拟同意。', 13, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-07', '2022-07-13', '2022-07-14', NULL, NULL, '2022-07-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418858810672', NULL, '1', '邻水农经权项目2022年6月', 59, NULL, '1、县城生活费较乡镇高一些，黄文峰工作至10日离开后，项目部计5人；\n3、现场无公车，按里程每公里2元补贴私车公用；\n4、临时工和实习生工资、按实际工作量计算至6月20日。', NULL, '2022-07-08', 28670.00, 28670.00, '情况属实，同意借款。', 20, '同意', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-08', '2022-07-11', '2022-07-12', NULL, NULL, '2022-07-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418858820673', '1648881413328207874', '0', NULL, 101, 112, '项目计划本月底或下月初进场，生产参与人员3人～4人，外业工期预计1个月。', NULL, '2022-10-24', 67000.00, 61200.00, '按照当地实际消费水平所列开支。', 101, '已阅核，按61200元借支。', 13, 2, '根据进场后生产需求拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-24', '2022-11-03', '2022-11-03', NULL, NULL, '2022-11-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418858830674', NULL, '1', '蓬安县林权类不动产登记数据整合项目代理服务费', 26, 105, '蓬安县林权类不动产登记数据整合项目代理服务费', NULL, '2022-10-25', 57300.00, 57300.00, '已核，情况属实。', 13, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-25', '2022-10-25', '2022-10-27', NULL, NULL, '2022-10-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418858840675', NULL, '1', '招标代理服务费', 24, 105, '仪陇县林权数据整合建库采购项目（项目编号：N5113242022000086）于2022年10月25日发布中标公示，公示期1天。我公司中标价为：3157000.00元。现根据竞争性磋商文件要求，本项目需要办理的代理服务费为32260.00元。\n转账信息附后：\n收款单位：四川亘晟项目管理有限公司\n开 户 行：四川仪陇农村商业银行股份有限公司\n银行账号：5234 0120 0000 1689 4', NULL, '2022-10-26', 32260.00, 32260.00, '已核，情况属实。', 13, NULL, 7, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-26', '2022-10-26', '2022-10-27', NULL, NULL, '2022-10-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418858850676', '1648881412514512898', '0', NULL, 71, 111, NULL, NULL, '2022-07-22', 15226.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418858860677', NULL, '1', '临时人员购买意外伤害保险', 8, 104, '户名：泰康养老保险股份有限公司四川分公司\n账号：1000080004778685\n开户行：成都农村商业银行股份有限公司\n 联行号： 314651000000', NULL, '2022-08-11', 4500.00, 4500.00, '拟同意。', 112, '同意。', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-11', '2022-08-12', '2022-08-12', NULL, NULL, '2022-08-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418858870678', NULL, '1', '招标代理服务费', 24, 105, '（1）乳源县天然气管道及配套设施建设项目管网路由地形测绘及规划定桩测量项目（招标代理服务费：12000.00元）；（2）乳源县天然气管道及配套设施建设项目地下管线普查项目（招标代理服务费：8000.00元）', NULL, '2022-08-15', 20000.00, 20000.00, '已核，总公司先行垫付，后期从工程款里面扣留。', 13, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-16', '2022-08-16', '2022-08-16', NULL, NULL, '2022-08-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418858880679', '1648881415815430146', '0', NULL, 138, NULL, '施工监测、三方监测现场费用：包含现场人员生活生产费用、两套房水、电、气、物管、网费，租车部分费用，燃油费、汽车维修以及保养费用，一名做饭人员工资，合计40000元。\n施工监测项目其他费用：13500元整。\n注：中水德方帮忙签正式合同共四名员工，工资由德方暂时发放。', NULL, '2022-08-29', 53500.00, 53500.00, '情况属实，同意借款。', 20, '已审核，同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-29', '2022-08-30', '2022-09-04', NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418858890680', '1648881413844107265', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2022年09月份现场作业成本支出，费用明细见下方Excel。', NULL, '2022-09-28', 19200.00, 19200.00, '已核。', 101, '拟同意。', 13, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-28', '2022-10-08', '2022-10-10', NULL, NULL, '2022-10-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418858900681', NULL, '1', '京山市新型基础测绘体系建设项目二至八标段项目中标服务费', 23, 105, '公司名称：中三信工程管理（湖北）有限责任公司京山分公司\n开户行：中国农业银行股份有限公司京山京源支行\n账  号：17546101040015460 ', NULL, '2022-10-08', 24000.00, 24000.00, '已阅核，该费用已请合作单位支付给公司。', 13, NULL, 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-08', '2022-10-08', '2022-10-10', NULL, NULL, '2022-10-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418858910682', '1648881412384489473', '0', NULL, 113, NULL, '广元林权权籍补充调查服务项目借款说明。用餐人数五人，单价为60元每人每天，预计30天，共计9000元整；租车费用预计5000元一个月，加油费1500元每个月；耗材成本主要是打印纸和硒鼓预计1000元每个月；其他成本为商务用餐或者业主陪同去现场的花费，预计3000元一个月；水电费用预计500元一个月；试点期间对生活用品购买，人员生活费用，购买打印机等超支15000元整；租房为一个季度6722元，物业费用是一个季度1680元，项目部还需提供4000元的租房押金。综上所述，本次借款共计47402元。其中物业费1680元转到广元市圆方物业服务有限公司，开户行及账号：中国农业银行广元清水路分理处22278601040002396。租金和押金10722元转到账号22278101040008840开户行：农行广元昭化支行，公司名称：四川万利行商贸有限公司。', NULL, '2022-10-08', 47402.00, 47402.00, '同意借款', 20, '同意借款', 11, 2, '按需拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-10', '2022-10-11', '2022-10-14', NULL, NULL, '2022-10-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418858920683', NULL, '1', '2022年成都市工伤保险业务培训', 18, 104, '张明勇、简鑫两人培训费，2100元/人，共计4200元；转账，账号信息--收款方：四川省社会保险干部培训中心，开户银行：华夏银行成都东城根支行，开户账户：11367000000299975。', NULL, '2022-10-14', 4200.00, 4200.00, '同意。', 112, '同意', 2, 2, '及时支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-17', '2022-10-18', '2022-10-18', NULL, NULL, '2022-10-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418858930684', '1648881413860884481', '0', NULL, 102, 112, '二滩项目10月份支出，增加二滩观测便道维护费用和桐子林基准网年度观测费用。', NULL, '2022-10-26', 54404.00, 54404.00, '拟同意。', 101, '已阅核，拟同意。', 13, 2, '可以按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-26', '2022-11-04', '2022-11-07', NULL, NULL, '2022-11-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418858940685', '1648881412074110977', '0', NULL, 83, 111, '该项目测绘工程中心投入3人，现场租车司机1人，预计现场工作7日。', NULL, '2022-10-27', 15360.00, 14560.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-27', '2022-10-27', '2022-11-01', NULL, NULL, '2022-11-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418858950686', '1648881413344985090', '0', NULL, 109, 112, '1、人员进出场费用含机票及来往直孔电站的费用，人员为马如坤、高强。\n2、住宿按国网拉萨公司规定：100元/人·天，按2人30天计算。\n3、现场租车：主要为直孔电站、羊湖电站、拉萨羊湖基地转场使用。', NULL, '2022-07-17', 27400.00, 27400.00, '同意，现场实际开支属实。', 101, '已核，拟同意。请项目负责人商公司专职安全员监理劳动及防护用品相关台账及报销要求。', 13, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-17', '2022-07-18', '2022-07-19', NULL, NULL, '2022-07-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418858960687', '1648881412774559745', '0', NULL, 101, 112, '本次项目进场时间为6月22日，退场时间为7月17日。 由于现场工作涉及历年多次控制网点查勘、移交等工作，项目执行时段较前期计划时段有所延后，因此前次借款已不能满足现场实际开支需要，目前总开支已超出，特补充本项目借款。', NULL, '2022-07-20', 6243.00, 6243.00, NULL, 101, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-20', '2022-07-20', '2022-07-25', NULL, NULL, '2022-07-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418858970688', NULL, '1', '投标专用', 23, 105, '投标专用', NULL, '2022-08-10', 20000.00, 20000.00, '已核。', 13, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-10', '2022-08-15', '2022-08-15', NULL, NULL, '2022-08-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418858980689', '1648881412384489473', '0', NULL, 113, NULL, '租房：用于项目部租用住宿区域，预计10000元/年，住宿成本：在租房完成前解决住宿，预计120/天；用餐成本，60元每天，预计14天，生活成本：租房完成后用于项目部购买床及相关用品，预计3000元；办公用品：用于项目部办公室购买办公桌椅，制度及牌匾的制作，项目部宣传标语等，预计3000元；交通成本：试点期间交通费用支出，预计500元；打印成本：用于试点成果资料打印，预计成果为500元。共计20000元整。', NULL, '2022-08-10', 20000.00, 20000.00, '情况属实。同意借款。', 20, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-10', '2022-08-10', '2022-08-12', NULL, NULL, '2022-08-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418858990690', '1648881412514512898', '0', NULL, 83, 111, '1）交通成本为进出场乘坐动车、班车的费用；\n2）外包劳务成本为无人机委外飞行的费用。', NULL, '2022-08-18', 17020.00, 7020.00, '情况属实，同意借款。', 83, '数据采集改为签订合同支付。\n进出场及用车，根据实际情况做了调整。\n建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-18', '2022-08-23', '2022-08-29', NULL, NULL, '2022-08-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418859000691', '1648881412493541377', '0', NULL, 102, 112, '前期项目借款50000元，截止8月21日还剩余7800元左右，本次借款明细由现场负责人结合项目实际情况对后期费用进行预算。\n因现阶段天气炎热土建工作难度大，人工费和占地补偿费用较高，详见前期项目费用开支明细。', NULL, '2022-08-22', 40180.00, 40180.00, NULL, 102, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-23', '2022-08-29', '2022-08-30', NULL, NULL, '2022-08-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418859010692', NULL, '1', '猴子岩水电站外部变形监测2022年（第3次）结算税金缴纳', 101, 112, '猴子岩水电站外部变形监测项目2022年（第3次）结算产值1534553.56元（大写：人民币壹佰伍拾叁万肆仟伍佰伍拾叁元伍角陆分），需在项目所在地缴纳增值税，本次结算费用甲方将于2022年10月支付合同款。', NULL, '2022-09-19', 85000.00, 85000.00, NULL, 101, '拟同意。', 13, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-19', '2022-09-19', '2022-09-19', NULL, NULL, '2022-09-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418859020693', '1648881412254466049', '0', NULL, 71, 111, NULL, NULL, '2022-09-23', 22400.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859030694', '1648881413860884481', '0', NULL, 102, 112, '二滩项目9月开支', NULL, '2022-09-26', 28004.00, 28004.00, NULL, 101, '拟同意。', 13, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-26', '2022-09-27', '2022-09-28', NULL, NULL, '2022-09-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418859040695', '1648881412329963522', '0', NULL, 59, NULL, '说明：本次为9月份开支借款。\n第4项用工成本为8、9月份产生的实际记工额，需在10月15日前支付。', NULL, '2022-10-10', 67200.00, 67200.00, '情况属实，同意借款。', 20, '同意借款。', 11, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-11', '2022-10-12', '2022-10-14', NULL, NULL, '2022-10-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418859050696', '1648881415412776962', '0', NULL, 55, 109, NULL, NULL, '2022-10-10', 4900.00, 2000.00, '同意。', 46, NULL, 9, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-10', '2022-10-10', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859060697', '1648881412443209730', '0', NULL, 83, 111, '1）因甲方增加了控制测量工作量、现场天气炎热每日作业时间有限、测区高差大水准测量效率低等原因影响，项目预计在原借款审批天数的基础上增加13日；\n2）按6人*13天计算人天。现场为四个水准组同时作业，需要聘请8名工人，预计现场工作13天；\n3）前期已为4名工人购买了保险，本次只需新购买4人的保险费用。', NULL, '2022-08-18', 33420.00, 33420.00, '同意借款。', 83, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-18', '2022-08-19', '2022-08-23', NULL, NULL, '2022-08-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418859070698', NULL, '1', '补交中国地理信息产业协会会费（2023-2025年)', 52, 109, '我公司由单位会员升级为理事单位，（2023-2025年)每年补交5000元\n开户名称：中国地理信息产业协会\n开户银行：中信银行北京分行营业部\n银行账号：7111010195700004701\n银行行号：302100011106\n备注内容：会费', NULL, '2022-08-23', 15000.00, 15000.00, '情况属实。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-23', '2022-08-25', '2022-08-29', NULL, NULL, '2022-08-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418859080699', NULL, '1', '第四届工程监测技术大会会议费', 101, 112, '9月1日～9月2日在成都举行，会议主题为：工程监测数字化与智能化。参与人：周全', NULL, '2022-08-23', 1800.00, 0.00, '转账信息\n开户名：中国遥感应用协会\n开户行：中国工商银行科学园南路支行\n账 号：0200 2463 0902 0112 784', 101, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-08-23', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859090700', NULL, '1', '邻水县自然资源确权其它成本', 21, 105, '邻水县自然资源确权其他成本', NULL, '2022-08-29', 60000.00, 60000.00, '已核。', 13, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-29', '2022-08-29', '2022-08-30', NULL, NULL, '2022-08-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418859100701', '1648881413844107265', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2022年08月份现场作业成本支出，费用明细见下方Excel。', NULL, '2022-08-29', 14800.00, 14800.00, NULL, 101, '已阅核，拟同意。', 13, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-29', '2022-08-30', '2022-09-04', NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859110702', NULL, '1', '企业微信平台工资条', 8, 104, '开户行：北京银行股份有限公司南昌分行营业部\n户名：江西用友薪酬数字科技有限公司\n账号：20000049666000047901284', NULL, '2022-10-11', 1762.20, 1762.20, '拟同意。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-11', '2022-10-14', '2022-10-14', NULL, NULL, '2022-10-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418859120703', NULL, '1', '备用金', 112, 104, '申请2万元备用金，请领导批准。', NULL, '2022-10-13', 20000.00, 20000.00, '同意。', 112, '同意', 2, 2, '合理使用。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-13', '2022-10-14', '2022-10-14', NULL, NULL, '2022-10-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418859130704', '1648881412153802753', '0', NULL, 83, 111, '1）该项目测绘工程中心投入人员4人，预计现场工作7日；\n2）因测区现场饮食以海鲜类为主，伙食费用略高；\n3）现场租用SUV费用为400元/天，现场加油平均100元/天。', NULL, '2022-10-13', 14860.00, 14860.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-13', '2022-10-14', '2022-10-18', NULL, NULL, '2022-10-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418859140705', '1648881412124442625', '0', NULL, 61, 111, '1、计划工期12天，含（监测点安装埋设）；\n2、参与人员6人（含驾驶员）；\n3、马如坤、周全前期监测及资料整编指导，预计5天；\n4、五金采购费用主要用于监测点金属支架安装焊接等。', NULL, '2022-10-13', 12000.00, 12000.00, '情况属实，建议借款。', 61, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-13', '2022-10-14', '2022-10-18', NULL, NULL, '2022-10-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418859150706', NULL, '1', '2020W24泸县“房地一体”宅基地使用权、集体建设用地使用权及房屋所有权不动产登记项目现场检查', 55, 109, '预计工期为5~7天，人数为3人。', NULL, '2022-10-17', 4360.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859160707', NULL, '1', '海南全岛地形变化较大区域、漏洞区域机载LIDAR数据获取技术服务项目代理费', 25, 105, '户  名：海南海政招标有限公司\n开户行：中国建设银行海口龙珠支行\n帐  户：46001003536053003445\n转款备注：（项目编号：HZ2022-235）的中标代理费', NULL, '2022-10-24', 12700.00, 12700.00, '已核，情况属实。', 13, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-24', '2022-10-24', '2022-10-25', NULL, NULL, '2022-10-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418859170708', NULL, '1', '新进人员购商业保险', 8, 104, '户名：泰康养老保险股份有限公司四川分公司\n账号：1000080004778685\n开户行：成都农村商业银行股份有限公司\n 联行号： 314651000000 ', NULL, '2022-10-24', 2076.44, 2076.44, '情况属实。', 112, '同意支付。', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-24', '2022-10-25', '2022-10-25', NULL, NULL, '2022-10-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418859180709', '1648881412594204674', '0', NULL, 83, 111, '该项目外业及控制测量组3人，司机1人，预计现场工作10日。飞行组2人，司机1人，预计现场工作5日。共计55人.天', NULL, '2022-07-15', 12525.00, 12525.00, '情况属实，同意借款。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-18', '2022-07-20', '2022-07-22', NULL, NULL, '2022-07-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418859190710', '1648881414410338305', '0', NULL, 61, 111, '1、2022年7月开展1:2000地形图权属及地类调查变更工作；\n2、现场实际发生成本2750元，本次按实际申请借款；\n3、现场参与人员3人（含司机），实际工期4天（含进出场）；', NULL, '2022-08-01', 2750.00, 2750.00, '情况属实，同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-02', '2022-08-02', '2022-08-08', NULL, NULL, '2022-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418859200711', '1648881412493541377', '0', NULL, 102, 112, '以上费用为一、二级总费用，计划投入人员5人，土建费用包括材料、人工费，土地补偿及便道修建暂未预算，根据现场情况再定。', NULL, '2022-08-02', 60000.00, 50000.00, '拟同意。', 101, '按项目预算，老鹰岩一、二级计算绩效74214元，借支60000元，比例不合理。\n建议本期按50000元借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-02', '2022-08-04', '2022-08-08', NULL, NULL, '2022-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418859210712', NULL, '1', '昭化区林权权籍补充调查技术服务合同履约保函费用（1年）', 14, 106, '一年期保函保底收费10000.00元', NULL, '2022-08-12', 10000.00, 10000.00, NULL, 14, '同意。', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-12', '2022-08-12', '2022-08-12', NULL, NULL, '2022-08-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418859220713', '1648881412346740737', '0', NULL, 83, 111, '1）该项目测绘工程中心投入4人（夏志军、雷佳川、赵明焱、蒋剑虹），司机1人，预计现场工作15日；\n2）现场为旅游区，有游船，在水库区内开展水下测量工作需租用机动船。', NULL, '2022-08-16', 14000.00, 11000.00, '情况属实，同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-16', '2022-08-16', '2022-08-17', NULL, NULL, '2022-08-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418859230714', '1648881412401266689', '0', NULL, 33, 110, '外业飞行已完成，实报实销。外业飞行3人。车辆一台。时间2天。车辆加油费用包含进出场加油费用。\n具体费用明细见上传附件”金川项目费用明细“', NULL, '2022-08-19', 2246.00, 2246.00, '同意借款', 33, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-19', '2022-08-19', '2022-08-23', NULL, NULL, '2022-08-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418859240715', '1648881413860884481', '0', NULL, 102, 112, '二滩项目8月开支，增加二滩平面和金龙山季度观测费用27860元。', NULL, '2022-08-23', 56464.00, 56464.00, '拟同意。及时与甲方办理季度结算，确保合同款及时回款。', 101, '同意。', 13, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-23', '2022-08-29', '2022-08-30', NULL, NULL, '2022-08-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418859250716', '1648881412552261633', '0', NULL, 32, 107, '住宿用餐按4天隔离3天正常作业计划，现场需租车，回来机票两人。', NULL, '2022-08-25', 7600.00, 7600.00, '同意', 32, '同意', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-25', '2022-08-29', '2022-08-30', NULL, NULL, '2022-08-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418859260717', NULL, '1', '车辆保险及油料费', 16, 104, '目前已垫付1万左右', NULL, '2022-09-29', 20000.00, 20000.00, '拟同意。', 112, '同意。', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-30', '2022-10-08', '2022-10-08', NULL, NULL, '2022-10-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418859270718', NULL, '1', '购买地理信息产业报告', 14, 106, '开户银行：中国地理信息产业协会\n开户银行：中信银行北京分行营业部\n银行账户：7111010195700004701', NULL, '2022-04-27', 128.00, 128.00, NULL, 14, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-04-27', '2022-04-27', '2022-04-27', NULL, NULL, '2022-04-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418859280719', '1648881414410338305', '0', NULL, 83, 111, '该项目参与人员3人，预计现场工作4天。', NULL, '2022-05-12', 2040.00, 2040.00, '同意。', 83, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-12', '2022-05-16', '2022-05-17', NULL, NULL, '2022-05-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418859290720', NULL, '1', 'ML水库电站规划加深阶段测绘技术服务合同履约保函费用', 14, 106, '担保金额的百分之一，1666000.00*0.01=16660元。', NULL, '2022-05-16', 16660.00, 16660.00, NULL, 14, '同意。', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-16', '2022-05-17', '2022-05-17', NULL, NULL, '2022-05-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418859300721', NULL, '1', '备用金', 14, 106, NULL, NULL, '2022-05-17', 20000.00, 20000.00, NULL, 14, '同意。', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-17', '2022-05-17', '2022-05-17', NULL, NULL, '2022-05-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418859310722', '1648881415815430146', '0', NULL, 138, NULL, '商务成本：端午过节送监理、第三方监测负责人14人（科研所现场负责人拟定名单）红包共计15000元，        以及用餐预算2000元\n用餐成本：现场工作人员生活费用。\n其他费用：包含两套房水、电、气、物管、网费，租车部分费用，燃油费、2名实习人员工资，一名做饭人员工资。\n注：中水德方帮忙签正式合同共两名员工，以及三名实习生，工资费用由中水德方发放。', NULL, '2022-05-24', 57000.00, 57000.00, '情况属实。', 20, '同意借款。', 11, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-05-24', '2022-05-26', '2022-05-30', NULL, NULL, '2022-06-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418859320723', '1648881419607080962', '0', NULL, 113, NULL, '租房费用：南江项目部租房于2022年6月5日到期，预计再续租半年，费用共计5000元整。', NULL, '2022-06-01', 5000.00, 5000.00, '情况属实。', 20, '同意', 11, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-02', '2022-06-02', '2022-06-06', NULL, NULL, '2022-06-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418859330724', '1648881414641025025', '0', NULL, 83, 111, '因张波离职，了结张波2021~2022年预结算费用。', NULL, '2022-06-07', 28712.50, 28712.50, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-06-07', '2022-06-10', '2022-06-15', NULL, NULL, '2022-06-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418859340725', NULL, '1', '_水平位移监测控制网稳定性评判方法-专利年费（初审费公布费实审费）', 52, 109, '初审费270公布费50实审费750\n开户银行：中国农业银行股份有限公司成都蜀都支行\n户名：国家知识产权局专利局成都代办处\n账号：229201010400233120000000001', NULL, '2022-07-21', 1070.00, 1070.00, '情况属实，同意办理。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-21', '2022-07-21', '2022-07-22', NULL, NULL, '2022-07-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418859350726', '1648881415815430146', '0', NULL, 138, NULL, '其他用：包含现场人员生活生产费用、两套房水、电、气、物管、网费，租车部分费用，燃油费、汽车维修以及保养费用，一名做饭人员工资，合计40000元。\n住宿成本：重庆办公租房（金田花苑小区）一季度（3个月）房租9300元。\n注：中水德方帮忙签正式合同共四名员工，以及二名实习生，工资费用由中水德方发放。', NULL, '2022-07-23', 49300.00, 49300.00, '情况属实，同意借款。', 20, '同意借款', 11, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-25', '2022-07-25', '2022-08-01', NULL, NULL, '2022-08-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418859360727', NULL, '1', '邻水农经权项目2022年7月', 59, NULL, NULL, NULL, '2022-07-26', 26300.00, 26300.00, '情况属实，同意借款。', 20, '同意借款', 11, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-27', '2022-07-29', '2022-08-01', NULL, NULL, '2022-08-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418859370728', '1648881412552261633', '0', NULL, NULL, 109, NULL, NULL, '2022-08-01', 17565.00, 17565.00, '情况属实，同意借款。', 20, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-02', '2022-08-08', '2022-08-12', NULL, NULL, '2022-08-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418859380729', '1648881413244321794', '0', NULL, 61, 111, '1、2022年7月开展1:2000地形图权属及地类调查变更工作；\n2、现场实际发生成本1406元，本次按实际申请借款；\n3、项目参与人员3人（含司机），工期4天（含进出场）；', NULL, '2022-08-02', 1406.00, 1406.00, '情况属实，同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-02', '2022-08-03', '2022-08-05', NULL, NULL, '2022-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418859390730', '1648881413114298369', '0', NULL, 83, 111, '该项目现场参与人员2人，预计现场工作3日。', NULL, '2022-08-04', 1940.00, 1940.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-04', '2022-08-04', '2022-08-05', NULL, NULL, '2022-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418859400731', NULL, '1', '备用金', 112, 104, '近期开支项目较多，个人已垫付部分费用，所以本次备用金申请稍多点。请领导批准，谢谢。', NULL, '2022-08-16', 30000.00, 30000.00, '同意。', 112, '同意', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-16', '2022-08-16', '2022-08-16', NULL, NULL, '2022-08-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418859410732', NULL, '1', '广元市鱼洞河水厂及配套管网建设项目工程地质勘察生产费用', NULL, 113, NULL, NULL, '2022-08-16', 20000.00, 20000.00, '同意', NULL, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-16', '2022-08-16', '2022-08-16', NULL, NULL, '2022-08-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418859420733', NULL, '1', '邻水宅基地项目2022年7月补', 59, NULL, NULL, NULL, '2022-08-16', 3250.00, 3250.00, '情况属实。', 20, '同意借款', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-17', '2022-08-17', '2022-08-18', NULL, NULL, '2022-08-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418859430734', NULL, '1', '邻水农经权项目2022年7月补', 59, NULL, NULL, NULL, '2022-08-16', 4000.00, 4000.00, '情况属实，同意借款。', 20, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-17', '2022-08-17', '2022-08-18', NULL, NULL, '2022-08-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418859440735', '1648881412346740737', '0', NULL, 83, 111, '因测区增加了测绘面积，需要延长工作5日。', NULL, '2022-08-30', 3400.00, 3400.00, '情况属实。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-30', '2022-08-31', '2022-09-04', NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859450736', NULL, '1', '喀什试点项目', 32, 102, '新疆喀什疫情解封，可正常作业，计划四天完成工作，开车回来四天。', NULL, '2022-08-30', 10000.00, 10000.00, '同意', 32, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-30', '2022-08-31', '2022-09-04', NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859460737', '1648881412296409090', '0', NULL, 33, 110, '一行5人，由河北东石岭项目出发前往山西沁水。车牌号：川A0T282.\n进出场+现场工作时间共计6天。', NULL, '2022-09-09', 3800.00, 3800.00, '同意', 33, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-09', '2022-09-14', '2022-09-16', NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859470738', '1648881412552261633', '0', NULL, NULL, 107, '博州项目目前预计出差15天，实际可能有变化', NULL, '2022-07-18', 19700.00, 19700.00, '情况属实，同意借款。', 20, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-18', '2022-07-18', '2022-07-19', NULL, NULL, '2022-07-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418859480739', NULL, '1', '（85高程转换）广西资源县（马家站点）抽水蓄能电站', 52, 109, '账 &nbsp; &nbsp; 户：广西壮族自治区自然资源信息中心\n账 &nbsp; &nbsp; 号：622357486687\n开 户 银 行：中国银行南宁市东盟商务区支行', NULL, '2022-07-25', 300.00, 300.00, '情况属实，同意申请。', 46, '同意。', 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-25', '2022-07-25', '2022-07-25', NULL, NULL, '2022-07-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418859490740', '1648881412443209730', '0', NULL, 83, 111, '该项目测绘工程中心现场参与人员5人，另有租车司机1人，预计现场工作40天。\n二等水准测量计划开展两个组/每组两台仪器，需聘请固定扶水准尺工人4人，预计用工30日。', NULL, '2022-07-27', 66400.00, 59400.00, '同意。', 83, '按30天预算，同意借款', 11, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-27', '2022-07-28', '2022-08-01', NULL, NULL, '2022-08-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418859500741', NULL, '1', '广西平那高速公路测绘项目', 52, 109, '单位名称: 广西壮族自治区自然资源信息中心 \n开户行:中国银行南宁市东盟商务区支行 &nbsp;&nbsp;&nbsp;&nbsp; \n开户帐号：622357486687', NULL, '2022-08-01', 570.00, 570.00, '情况属实。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-01', '2022-08-01', '2022-08-04', NULL, NULL, '2022-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418859510742', '1648881412346740737', '0', NULL, 83, 111, '因现场增加了联测国家控制点的任务，开展了现场找寻控制点及联测工作；\n根据实际开支进行补充借款。', NULL, '2022-09-16', 3263.00, 3263.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-16', '2022-09-16', '2022-09-16', NULL, NULL, '2022-09-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418859520743', NULL, '1', '邻水县自然资源确权项目', 21, 105, '其他成本费用', NULL, '2022-09-19', 20000.00, 20000.00, '已核，无异议。', 13, NULL, 7, 2, '财务上给经营发展部单独设立一个科目“目标项目差率费”，该笔费用可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-19', '2022-09-19', '2022-09-19', NULL, NULL, '2022-09-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418859530744', NULL, '1', '新疆 水利枢纽工程施工测量服务报名费', 23, 105, '开户名称：北京峡光经济技术咨询有限责任公司新疆分公司\n开户账户：3002015109024959474\n开户银行：工商银行乌鲁木齐市新民路支行\n备注：新疆 水利枢纽工程施工测量服务报名费', NULL, '2022-09-19', 500.00, 500.00, '已核，无异议。', 13, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-19', '2022-09-19', '2022-09-19', NULL, NULL, '2022-09-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418859540745', NULL, '1', '办理湖北襄阳市公共资源交易中心数字证书', 23, 105, '金额0.06元，办理CA需要对公打款，认证公司账户信息，3个工作日内完成汇款。', NULL, '2022-09-22', 0.10, 0.10, '已核。', 13, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-22', '2022-09-22', '2022-09-25', NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859550746', '1648881412254466049', '0', NULL, 83, 111, '1）本项目测绘工程中心投入4人，激光技术部投入2人，司机2名，预计现场工作10日；\n2）因测区无手机信号，需由自然资源部第三大地测量队进行平面与高程的联测、解算。', NULL, '2022-09-26', 20400.00, 17400.00, '情况属实，同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-26', '2022-09-27', '2022-09-28', NULL, NULL, '2022-09-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418859560747', '1648881412594204674', '0', NULL, 93, 111, NULL, NULL, '2022-10-20', 30000.00, 30000.00, '情况属实，建议借款支付。', 61, '根据实际情况，建议借支。\n在工伤、意外伤害理赔后抵扣。', 10, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-20', '2022-10-20', '2022-10-20', NULL, NULL, '2022-10-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418859570748', '1648881412594204674', '0', NULL, 83, 111, '该项目新增了地形图测绘工作，本项目参与人员4人，预计现场工作8天。', NULL, '2022-10-17', 7040.00, 7040.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-17', '2022-10-18', '2022-10-18', NULL, NULL, '2022-10-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418859580749', NULL, '1', '国网西藏拉萨发电公司羊湖电站压力钢管永久变形监测沉降水准工作基点改造项目', 101, 112, '国网西藏拉萨发电公司羊湖电站压力钢管永久变形监测沉降水准工作基点改造》编号：CMC2A22016，合同金额：948046元。按照合同金额2%比例预缴。企业所得税1739.53元，增值税及附加税19134.88元。共计20874.41元。', NULL, '2022-07-22', 20874.40, 0.00, NULL, 101, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-07-22', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859590750', '1648881413860884481', '0', NULL, 102, 112, '二滩监测项目部7月成本支出', NULL, '2022-07-28', 29940.00, 29940.00, '拟同意。', 101, '同意借款。', 13, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-28', '2022-08-04', '2022-08-08', NULL, NULL, '2022-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418859600751', NULL, '1', '广元市自然资源局昭化区分局昭化区林权权籍补充调查服务项目', 25, 105, '  中标代理服务费', NULL, '2022-08-01', 64883.00, 64883.00, NULL, 13, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-01', '2022-08-01', '2022-08-01', NULL, NULL, '2022-08-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418859610752', '1648881413412093953', '0', NULL, 61, 111, '1、本次借款为项目结束后的补充借款，按照实际垫付金额借款；\n2、本项目前期两次借款合计92300，项目结束后实际发生成本支付117263.28，垫付24963.28；', NULL, '2022-08-01', 24963.30, 24963.30, '情况属实，同意借款。', 83, '由于项目后期增加四处料场1000地形图、坝址下游至楞古坝址段地形图测绘等内容，外业工期延迟。\n情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-08-02', '2022-08-02', '2022-08-08', NULL, NULL, '2022-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418859620753', '1648881413114298369', '0', NULL, 71, 111, NULL, NULL, '2022-08-03', 1980.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859630754', '1648881412313186305', '0', NULL, 59, NULL, NULL, NULL, '2022-09-07', 2000.00, 2000.00, '情况属实。', 20, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-07', '2022-09-12', '2022-09-16', NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859640755', '1648881412443209730', '0', NULL, 83, 111, '1）因公路测量规范二等GNSS测量要求高（观测时间为4小时*4时段，远高于水电工程测量规范的1.5小时*2时段要求），又因同步环、异步环等指标要求高，导致之前观测的GNSS数据超限较多，需要返工观测。预计需要6日，用工为6日*5名工人；\n2）因现场的丰田海狮面包车较长，部分区域去不了，需临时租用当地车辆4日开展GNSS测量的返测工作；\n3）因测区高差很大、二等水准测量限差小，存在部分段超限需返工测量的情况。预计需要工作8日，用工为8日*4名工人；', NULL, '2022-09-08', 22800.00, 22800.00, '情况属实，同意借款。', 83, '同意借款（疫情期间未借）', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-08', '2022-09-19', '2022-09-20', NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859650756', NULL, '1', '资阳市2022年第26批次建设用地规划选址方案编制项目', 23, 105, '收款单位：四川诺道招标代理有限公司\n开 户 行：中国银行资阳凯旋国际支行\n银行账号：130711917697\n备注：中水测绘、资阳市2022年第26批次建设用地规划选址方案编制项目、SCND-ZF-2022185\n（2022年9月21日前转账）', NULL, '2022-09-20', 500.00, 500.00, '已核，配合其他单位项目，该费用已转财务。', 13, NULL, 7, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-20', '2022-09-20', '2022-09-20', NULL, NULL, '2022-09-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418859660757', '1648881412401266689', '0', NULL, 33, 110, '金川新增10000地形图任务12.1平方。要购买测绘局1万地形图6张。', NULL, '2022-09-27', 10000.00, 10000.00, '同意', 33, '此借款用于收集地形图，再外业修补测。张元锋已与甲方沟通，甲方将以合同方式支付我公司。\n对公转账，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-27', '2022-09-28', '2022-09-30', NULL, NULL, '2022-10-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418859670758', '1648881415815430146', '0', NULL, 138, NULL, '施工监测、三方监测现场费用：包含现场人员生活生产费用、两套房水、电、气、物管、网费，租车部分费用，燃油费、汽车维修以及保养费用，一名做饭人员工资，合计40000元。\n注：中水德方帮忙签正式合同共四名员工，工资由德方暂时发放。', NULL, '2022-09-29', 40000.00, 40000.00, '情况属实。', 20, '同意借款。', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-29', '2022-09-29', '2022-09-30', NULL, NULL, '2022-10-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418859680759', '1648881413806358530', '0', NULL, 122, 111, '因两河口水电站扎拖特大桥左岸边坡三维激光扫描项目，需租赁激光扫描设备一台。', NULL, '2022-10-20', 30000.00, 30000.00, '已确认', 122, '情况属实，建议借支。', 10, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-20', '2022-10-20', '2022-10-20', NULL, NULL, '2022-10-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418859690760', '1648881412514512898', '0', NULL, 83, 111, '1.（业测量组由测绘工程中心杨为康、董旭鹏、夏志斌3人参与，司机为凌涛，另有成都院龙宇杰一同前往，其现场费用由我方承担。预计现场工作15日；\n2.无人机飞行组为激光技术部王刚、测绘工程中心夏志军、司机熊艳华3人，主要负责无人机飞行工作。预计现场工作5日；\n3.由于本次租用的越野车未安装ETC，需要付往返高速公路过路费。', NULL, '2022-07-22', 18380.00, 18380.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-22', '2022-07-26', '2022-08-01', NULL, NULL, '2022-08-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418859700761', NULL, '1', '商务接待用酒', 112, 104, '对公转账信息如下：\n抬头：贵州昆辉酒业销售有限公司\n税号：91520382MA6J841Q9H\n地址：贵州省遵义市仁怀市苍龙街道苍龙社区温水组\n电话：15329626077\n开户行：中国工商银行工行遵义仁怀国酒支行\n账号：6232712403000199149', NULL, '2022-07-26', 44700.00, 44700.00, '情况属实。', 112, '同意。', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-07-26', '2022-07-26', '2022-07-26', NULL, NULL, '2022-07-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418859710762', '1648881412329963522', '0', NULL, 59, NULL, '第五项：因扩招人员，采购3套桌椅、2台二手电脑，3台二手扫描仪等；\n第六项：扩充办公区域，新租隔壁一间仓库。', NULL, '2022-09-07', 36000.00, 36000.00, '情况属实', 20, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-07', '2022-09-12', '2022-09-16', NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859720763', NULL, '1', '新一年度商业保险（全体员工）', 8, 104, '户名：泰康养老保险股份有限公司四川分公司\n账号：1000080004778685\n开户行：成都农村商业银行股份有限公司\n 联行号： 314651000000  ', NULL, '2022-09-26', 167700.00, 167700.00, '拟同意。', 112, '刚需费用，同意。', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-28', '2022-09-28', '2022-09-28', NULL, NULL, '2022-09-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418859730764', NULL, '1', '招标代理服务费', 24, 105, '大唐观音岩水电开发有限公司变形监测控制网复测及坝前淤积和坝后冲刷测量项目（项目名称）已中标，中标价为：578100.00元（大写伍拾柒万捌仟壹佰元整）。根据询价采购文件要求，本项目需要办理的招标代理服务费是：\n采购代理服务费收费比率：成交金额的3%。即：17343.00元（大写：壹万柒仟叁佰肆拾叁元整）。（大唐电子商务平台网上支付）', NULL, '2022-09-27', 17343.00, 17343.00, '已核，情况属实。', 13, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-27', '2022-09-27', '2022-09-28', NULL, NULL, '2022-09-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418859740765', NULL, '1', '海南全岛地形变化较大区域、漏洞区域机载LIDAR数据获取技术服务项目报名费', 25, 105, NULL, NULL, '2022-10-10', 200.00, 200.00, '情况属实 同意支付', 21, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-10', '2022-10-10', '2022-10-10', NULL, NULL, '2022-10-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418859750766', NULL, '1', '专利年费（2018113926444一种水下地形测量装置及方法）', 52, 109, '网转 国家知识产权局账号：中信银行北京知春路支行；户名:国家知识产权局专利局；帐号:7111710182600166032\n银行网转。必须汇款当日， 百度：“专利缴费信息网上补充及管理系统” 。补充缴费信息以便顺利取得缴费票据。请转账当日通知我', NULL, '2022-10-20', 1200.00, 1200.00, '情况属实。', 46, NULL, 9, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-20', '2022-12-12', '2022-12-13', NULL, NULL, '2022-12-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418859760767', '1648881415815430146', '0', NULL, 138, NULL, '施工监测、三方监测现场费用：包含现场人员生活生产费用、两套房水、电、气、物管、网费，租车部分费用，燃油费、汽车维修以及保养费用，一名做饭人员工资，合计40000元。\n租房：重庆金田花苑小区套四住房一季度共9600元，芳草地小区住房套三半年共16800元，两套房合计26400元。\n三方监测仪器检定费：TM30全站仪一台3740元、水准尺一套1530元、测斜仪一台700元、水位计一台700元。合计6670元\n注：中水德方帮忙签正式合同共四名员工，工资由德方暂时发放（其中一人本月15日离职工资发放一半）。', NULL, '2022-10-21', 73070.00, 73070.00, '情况属实，同意借支。', 20, '同意借款', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-24', '2022-10-25', '2022-10-27', NULL, NULL, '2022-10-31');
INSERT INTO `cmc_borrow` VALUES ('1648881418859770768', '1648881415815430146', '0', NULL, 138, NULL, '其他成本：司机预发工资，厨师工资。\n房租：项目上一套房的一季度租金。\n商务成本：施工监测项目过年商务成本。\n水磨机：施工监测地面钻孔购买机械费用。\n租车尾款：项目每月连人带车费用7000，每月预发5000，一年还剩24000元未结。\n注：中水德方帮忙签正式合同3人，以及8名实习生工资由德方代发。', NULL, '2023-01-16', 63200.00, 63200.00, '情况属实。', 20, NULL, 11, 2, '同意按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-01-16', '2023-01-16', '2023-01-16', NULL, NULL, '2023-01-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418859780769', NULL, '1', '川A5177U燃油费;川A1686T、川A1081W保险', 16, 104, NULL, NULL, '2023-02-01', 20000.00, 20000.00, '同意', 8, '同意', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-01', '2023-02-01', '2023-02-01', NULL, NULL, '2023-02-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418859790770', '1648881411650486273', '0', NULL, 101, 112, '西藏拉萨羊湖电站压力钢管永久变形监测项目现场作业成本支出，该费用为预估成本。', NULL, '2023-02-01', 93900.00, 93900.00, '请主管领导审核。', 101, '同意', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-01', '2023-02-02', '2023-02-03', NULL, NULL, '2023-02-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418859800771', NULL, '1', '备用金', 30, 106, '提取备用金', NULL, '2023-02-01', 110000.00, 110000.00, NULL, 14, '同意。', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-01', '2023-02-01', '2023-02-01', NULL, NULL, '2023-02-01');
INSERT INTO `cmc_borrow` VALUES ('1648881418859810772', NULL, '1', '2023年成都日报订阅', 18, 104, '应青羊区人民政府草堂街道办事处《成都日报》征订工作要求，申请订阅一份《成都日报》，每份496元/年。金额合计496元。转账，账号信息--收款方：成都市青羊区人民政府草堂街道办事处；开户银行:成都银行青羊支行；账号:1001420000000739.', NULL, '2022-10-31', 496.00, 496.00, '同意。', 112, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-01', '2022-11-03', '2022-11-03', NULL, NULL, '2022-11-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418859820773', '1648881414544556034', '0', NULL, 148, NULL, '申请支付丙方（地信公司）检验费用，账号见所附合同。', NULL, '2022-11-07', 50000.00, 50000.00, '情况属实，同意借支。', 20, '同意借款支付', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-07', '2022-11-07', '2022-11-07', NULL, NULL, '2022-11-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418859830774', NULL, '1', '中行贷款担保费', 14, 106, '年费500万*2%=10万', NULL, '2022-11-10', 100000.00, 100000.00, NULL, 14, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-10', '2022-11-10', '2022-11-10', NULL, NULL, '2022-11-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418859840775', '1648881412254466049', '0', NULL, 71, 111, NULL, NULL, '2022-11-23', 3682.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859850776', '1648881411826647041', '0', NULL, 33, 110, '一共5人，两次进出场，预计12天。', NULL, '2022-12-07', 10640.00, 10640.00, '同意', 33, '建议借支。', 10, 2, '可以拨付，由项目负责人说明一下两次进出场的原因。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-07', '2022-12-15', '2022-12-16', NULL, NULL, '2022-12-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418859860777', '1648881419607080962', '0', NULL, 113, NULL, '南江房地一体项目项目部租房已经到期，根据现有情况，仍然需要租用项目部。租房时间2022年12月10日至2023年6月10日。共计金额5000元整。', NULL, '2022-12-19', 5000.00, 5000.00, '情况属实。', 20, '同意借款', 11, 2, '同意拨付，尽快冲账。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-26', '2022-12-26', '2022-12-26', NULL, NULL, '2022-12-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418859870778', '1648881413860884481', '0', NULL, 102, 112, '二滩项目12月成本支出。', NULL, '2022-12-27', 52666.00, 52666.00, '同意。', 101, '已核。', 13, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-27', '2023-01-03', '2023-01-10', NULL, NULL, '2023-01-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418859880779', '1648881411667263489', '0', NULL, NULL, 113, '钻探队伍劳务费', NULL, '2022-12-27', 35000.00, 35000.00, '外业工作将于12月30日完成。', NULL, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-27', '2022-12-29', '2022-12-29', NULL, NULL, '2022-12-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418859890780', NULL, '1', '专利年费（3个）', 52, 109, '开户名：国家知识产权局专利局成都代办处\n开户行：中国农业银行股份有限公司成都蜀都支行\n账  号：229201010400233120000000001', NULL, '2023-01-09', 725.00, 725.00, '情况属实。', 46, '同意。', 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-01-10', '2023-01-11', '2023-01-11', NULL, NULL, '2023-01-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418859900781', '1648881412329963522', '0', NULL, 59, NULL, '仓库2间，租金续交至2023年2月\n临时用工已基本结束。', NULL, '2022-12-13', 41635.00, 41635.00, '情况属实。', 20, '项目基本完成，后续不在涉及大量用工及住勤成本，同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-15', '2022-12-20', '2022-12-23', NULL, NULL, '2022-12-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418859910782', NULL, '1', '订阅中国测绘2023年全年12期', 52, 109, '汇款识别码：ZC1329813455962（请务必将汇款识别码填写到附言、摘要、备注等栏内）\n收款账号：户名：北京中测传媒有限公司\n账户：0200216209200078460\n开户行：中国工商银行股份有限公司北京马连道支行', NULL, '2022-12-26', 3288.00, 3288.00, '订阅中国测绘2023年全年12期。', 46, '同意。', 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-26', '2022-12-26', '2022-12-26', NULL, NULL, '2022-12-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418859920783', '1648881411885367297', '0', NULL, 83, 111, '该项目参与人员为4人，因测区部分区域进行了土地进行整理与收集到的航片资料差异较大，修补测的工作超过预期，预计需增加10日工期。', NULL, '2023-01-05', 9000.00, 6400.00, '同意借款。', 83, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-01-05', '2023-01-06', '2023-01-11', NULL, NULL, '2023-01-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418859930784', '1648881412254466049', '0', NULL, 83, 111, '1.杨为康、王刚、万隆卿及熊艳华4人共6天，合计24人.天（该费用前期已由杨为康垫付）；\n2.廖绍毅、何涛及租车司机3人共4天，合计12人.天；\n3.剩余变更增加任务飞行预计3人共3天，调绘预计3人共3天，合计18人.天。', NULL, '2023-01-05', 10760.00, 10760.00, '同意借款。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-01-05', '2023-01-06', '2023-01-11', NULL, NULL, '2023-01-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418859940785', '1648881412040556545', '0', NULL, NULL, 108, '本次申请费用于12月份临聘人员部分绩效预发。', NULL, '2023-01-09', 100000.00, 100000.00, '项目经理用于12月份临聘人员部分绩效发放，建议预支。', 39, '同意借款', 11, 2, '同意依照项目生产需求拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-01-10', '2023-01-11', '2023-01-13', NULL, NULL, '2023-01-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418859950786', '1648881412124442625', '0', NULL, 61, 111, '项目实际开支13527.00元，前期借款12000，本次补充借款1527元。', NULL, '2022-10-31', 1527.00, 0.00, '情况属实，建议借款。', 61, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-10-31', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418859960787', '1648881413844107265', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2022年10月份现场作业成本支出，费用明细见下方Excel。', NULL, '2022-10-31', 14800.00, 14100.00, NULL, 101, '已阅核，按14100.00元借支。', 13, 2, '同意该借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-31', '2022-11-03', '2022-11-03', NULL, NULL, '2022-11-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418859970788', '1648881415815430146', '0', NULL, 138, NULL, '施工监测、三方监测现场费用：包含现场人员生活生产费用、两套房水、电、气、物管、网费，租车部分费用，燃油费、汽车维修以及保养费用，一名做饭人员工资，合计40000元。\n住宿成本：新招9名实习生，需要租房一套。\n注：中水德方帮忙签正式合同共三名员工，工资由德方暂时发放。', NULL, '2022-11-30', 55000.00, 55000.00, '同意借款', 11, '同意借款', 11, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-06', '2022-12-06', '2022-12-09', NULL, NULL, '2022-12-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418859980789', '1648881411986030594', '0', NULL, 32, NULL, '由于空域影响，飞行采集实际天数比计划天数多。', NULL, '2022-11-14', 3000.00, 2698.00, '按2人5天计划', 32, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-14', '2022-11-22', '2022-11-25', NULL, NULL, '2022-11-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418859990790', '1648881413860884481', '0', NULL, 102, 112, '二滩项目11月开支，详见附表', NULL, '2022-11-23', 49596.00, 49596.00, '拟同意', 101, '已核，可借支。', 13, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-23', '2022-11-29', '2022-11-29', NULL, NULL, '2022-12-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418860000791', '1648881411885367297', '0', NULL, NULL, 111, NULL, NULL, NULL, 11420.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418860010792', '1648881413344985090', '0', NULL, 109, 112, '1、生活成本按每人90元一天，按1人120天计算。\n2、住宿按2个房间，每间100元，按120天计算。\n3、现场聘用民工，因外来人员无法进站，只能聘用站内人员，按300元一天，按2人10天计算。\n4、因拉萨疫情，相关物资的购买成本大幅上涨', NULL, '2022-12-08', 35300.00, 35300.00, '拟同意，情况属实。', 101, '已核，可借支。', 13, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-08', '2022-12-09', '2022-12-13', NULL, NULL, '2022-12-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418860020793', '1648881411868590081', '0', NULL, NULL, 113, '安徽贵池区渔光互补光伏电站项目，工程地质勘察外业劳务成本费', NULL, '2022-12-13', 30000.00, 30000.00, '外业工作已完成，情况属实，同意！', NULL, '同意借款。', 11, 2, '公司自营项目，按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-13', '2022-12-13', '2022-12-14', NULL, NULL, '2022-12-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418860030794', '1648881412384489473', '0', NULL, 113, NULL, '本次请款是用于广元市昭化区林权权籍补充调查服务项目租房，时间为2022年11月10日至2022年2月10日，共计金额8402元，其中房租6722元，物业1680元。', NULL, '2022-12-19', 8402.00, 8402.00, '情况属实。', 20, '同意借款', 11, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-12-26', '2022-12-26', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418860040795', '1648881413844107265', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2022年12月份现场作业成本支出，费用明细见下方Excel。', NULL, '2022-12-27', 43300.00, 43300.00, '同意。', 101, '已核。', 13, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-27', '2023-01-03', '2023-01-11', NULL, NULL, '2023-01-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418860050796', '1648881414544556034', '0', NULL, 148, NULL, '申请支付乙方（省质检站）检验费用，账号见所附合同。', NULL, '2022-11-07', 30000.00, 30000.00, '情况属实，同意借支。', 20, '同意借款支付', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-07', '2022-11-07', '2022-11-07', NULL, NULL, '2022-11-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418860060797', NULL, '1', '邻水县重点区域自然资源统一确权登记服务项目', 21, 105, '邻水县重点区域自然资源统一确权登记服务项目成本费用', NULL, '2022-11-07', 50000.00, 50000.00, '已阅核，无异议。请及时提供发票冲抵。', 13, '同意', 7, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-08', '2022-11-09', '2022-11-09', NULL, NULL, '2022-11-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418860070798', '1648881412329963522', '0', NULL, 59, NULL, NULL, NULL, '2022-11-10', 69650.00, 69450.00, '情况属实，建议借款。', 20, '同意借款', 11, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-11', '2022-11-15', '2022-11-16', NULL, NULL, '2022-11-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418860080799', '1648881412313186305', '0', NULL, 59, NULL, '集体所有权工作验收借款（10月）', NULL, '2022-11-10', 22300.00, 22300.00, '情况属实，建议借款。', 20, '同意借款', 11, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-11', '2022-11-15', '2022-11-16', NULL, NULL, '2022-11-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418860090800', '1648881413844107265', '0', NULL, 101, 112, '本费用支出为猴子岩监测项目2022年11月份现场作业成本支出，费用明细见下方Excel。', NULL, '2022-12-02', 36490.00, 30700.00, NULL, 101, '已阅核，按30700元借支。', 13, 2, '同意按照30700元拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-02', '2022-12-06', '2022-12-09', NULL, NULL, '2022-12-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418860100801', NULL, '1', '南充市高坪区地质灾害项目', NULL, 102, '南充市高坪区地质灾害项目技术服务费（12月5日提交上传资料前，需支付至该项目第一批次总技术服务费的80%）', NULL, '2022-12-02', 33600.00, 33600.00, '同意', NULL, '情况属实', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-02', '2022-12-05', '2022-12-05', NULL, NULL, '2022-12-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418860110802', '1648881411772121090', '0', NULL, 83, 111, '该项目参与人员：廖绍毅、肖建光、李杨、王刚、康科伟，凌涛，汽车2辆。\n预计现场地面组4人预计13天，飞行组2人预计7天。', NULL, '2022-12-16', 12740.00, 12740.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-16', '2022-12-28', '2022-12-29', NULL, NULL, '2022-12-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418860120803', '1648881411688235010', '0', NULL, 59, NULL, NULL, NULL, '2023-01-17', 70000.00, 70000.00, '情况属实。', 20, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-01-17', '2023-01-17', '2023-01-17', NULL, NULL, '2023-01-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418860130804', NULL, '1', '泸县2022年度国土变更调查及日常变更工作', 23, 105, '收款单位：四川德才汇招标代理有限公司\n开户行：中国工商银行股份有限公司泸州自贸区支行\n银行账号：2304344309100122952\n备注：泸县2022年度国土变更调查及日常变更工作中标服务费', NULL, '2023-01-31', 43480.00, 43480.00, '已核，情况属实。', 13, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-01-31', '2023-01-31', '2023-01-31', NULL, NULL, '2023-02-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418860140805', NULL, '1', '国网拉萨发电公司2023年直孔、羊湖电站变形监测及资料整编', 25, 105, '国网拉萨发电公司2023年直孔、羊湖电站变形监测及资料整编 投标保证金保险 保费。', NULL, '2023-02-01', 70.00, 70.00, NULL, 21, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-01', '2023-02-01', '2023-02-03', NULL, NULL, '2023-02-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418860150806', NULL, '1', '重庆分公司', 142, 114, NULL, NULL, '2023-02-01', 40000.00, 34000.00, '同意借款。', 142, '已核，建议按34000.00元借支。负责人须将每次商务洽谈情况及预期效果及时汇报或随报销单据报送审批。', 13, 2, '同意，按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-01', '2023-02-03', '2023-02-06', NULL, NULL, '2023-02-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418860160807', '1648881415815430146', '0', NULL, 138, 114, '重庆轨道交通施工监测、三方监测、江津三方监测现场费用：包含现场人员生活生产费用费用，租车部分费用，燃油费、汽车维修以及保养费用，一名做饭人员工资，新招项目经理一人预发工资，合计50000元。\n注：中水德方帮忙签正式合同共三名员工，实习人员7人，工资由德方暂时发放。', NULL, '2023-02-02', 50000.00, 50000.00, '同意借款。', 142, '已核，拟同意。下次借款请按照项目申请及每个项目申请提交借款清单。', 13, 2, '按需拨付，已有借款须清理，尽快冲账处理。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-02', '2023-02-06', '2023-02-06', NULL, NULL, '2023-02-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418860170808', '1648881412002807809', '0', NULL, 61, 111, '1、预计工期12天（含进出场）；\n2、项目参与人员7人（含驾驶员）；\n3、预算借款，后期根据实际情况增补。', NULL, '2022-11-05', 15000.00, 15000.00, '建议借款', 61, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-05', '2022-11-07', '2022-11-09', NULL, NULL, '2022-11-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418860180809', '1648881412170579969', '0', NULL, 102, 112, '借款明细详见：观音岩测量项目现场开支预算表', NULL, '2022-11-07', 39200.00, 33700.00, '拟同意。', 101, '已阅核，暂按33700.00元借支。', 13, 2, '同意分管领导意见，可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-07', '2022-11-07', '2022-11-07', NULL, NULL, '2022-11-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418860190810', '1648881411965059074', '0', NULL, 83, 111, '该项目测绘工程中心廖绍毅、何涛参与，短租汽车一辆，预计现场工作7日。', NULL, '2022-11-15', 5360.00, 5360.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-15', '2022-11-16', '2022-11-21', NULL, NULL, '2022-11-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418860200811', '1648881414641025025', '0', NULL, 83, 111, '1）因项目开展期间受西藏当地防疫政策（必须保证48小时内核酸）、测区无法加油及项目组全体成员感染新冠等原因影响，致使项目需延期15日；\n2）因剩余水准测量工作区域弯道多、车辆多，需配置安全员一名，提醒过往车辆。用工成本为5个工（水准扶尺民工4人+安全员1名）预计工作12天；\n3）夏志斌2022年在JW项目工作时间较长（129天），因其在其他项目受伤需要费用治疗，提前预支部分费用。', NULL, '2022-12-26', 69700.00, 69700.00, '同意借款。', 83, '夏子斌申请借款两万元，用于支付治疗费用。\n情况属实，建议借支。', 10, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-26', '2022-12-28', '2022-12-29', NULL, NULL, '2022-12-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418860210812', '1648881415815430146', '0', NULL, 138, NULL, '其他成本：包含现场人员生活生产费用、三套房水、电、气、物管、网费，租车部分费用，燃油费、汽车维修以及保养费用，一名做饭人员工资，合计53500元。\n租车尾款：项目租车每月连人带车7000元，每月预发5000，年底剩余支付费用24000元。\n房租：一套项目租房，一季度房租9600元。\n商务成本：施工监测过年商务成本。\n注：中水德方帮忙签正式合同共四名员工，以及8名实习生，工资由中水德方发放。', NULL, '2022-12-27', 102100.00, 45000.00, '情况属实。', 20, '同意借款', 11, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-28', '2022-12-29', '2023-01-12', NULL, NULL, '2023-01-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418860220813', NULL, '1', '备用金', 30, 106, NULL, NULL, '2023-02-03', 10000.00, 10000.00, NULL, 14, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-03', '2023-02-03', '2023-02-03', NULL, NULL, '2023-02-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418860230814', '1648881411373662209', '0', NULL, 61, 110, '1、项目计划投入人员4人（含驾驶员），预计工期20天；\n2、现场需要租用机动船，费用按前期费用预算；', NULL, '2023-02-06', 25000.00, 25000.00, '按已实际工作预算，情况属实，建议借款。', NULL, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-06', '2023-02-08', '2023-02-10', NULL, NULL, '2023-02-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418860240815', '1648881411650486273', '0', NULL, 48, 109, '2022年度西藏地区监测项目尾工工程技术设计交底、监测设计回访、业主咨询交流、项目评审、巡查；外部专家审核、评价等工作', NULL, '2023-02-02', 135200.00, 135200.00, '该项目因疫情影响，作业时间较长。', 46, '非项目费用，已经核实', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-02', '2023-02-07', '2023-02-08', NULL, NULL, '2023-02-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418860250816', '1648881411235250178', '0', NULL, 83, 111, '1）本项目暂按两个月工期申请借款。本项目我公司暂定投入技术人员17人（其中有2人开展内业工作）、实习学生15人。总人天为（17人+15人）*60天；\n2）本项目食、宿、交通费用由甲方统一协调安排，最终再结清相关费用。食宿标准由米林县后勤保障组提供，后期可能略有出入。交通费用待后期确定后再补充借款；\n3）实习生工资暂不借款，待需支付时再补充借款；\n4）考虑项目实施过程中，可能存在甲方车辆不易协调、需到各工作组进行检查等临时租车的情况，暂按租20天车借款；\n5）第五项为采购少量必备药品，办公用品包含本次项目专用的移动硬盘、U盘、笔等；\n6）在项目实施过程中需进行沟通协调工作，暂按6000元商务费进行借款。', NULL, '2023-02-06', 566000.00, 390000.00, '同意借款。', 83, '财务部根据项目实际开支需要，分批借支；\n实习生工资由项目部提供相关票据、分配表等，由财务支付；\n商务费实为其他零星开支借款；\n建议借支。', 10, 2, '按需分批拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-06', '2023-02-08', '2023-02-10', NULL, NULL, '2023-02-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418860260817', '1648881411533045762', '0', NULL, 61, 110, '1、外业组4人（含驾驶员），预计工期12天（含进出场）；\n2、飞行组3人（含驾驶员），预计工期5天（含进出场）；\n3、水准测量预计7天，现场需民工1人；', NULL, '2023-02-06', 14000.00, 14000.00, '情况属实，建议借款。', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-06', '2023-02-08', '2023-02-08', NULL, NULL, '2023-02-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418860270818', '1648881414641025025', '0', NULL, 83, 111, '1）本项目测绘工程中心投入人员4人，预计现场工作40天，160人天。因西藏自治区疫情防控要求，需现场隔离7天，28人天。暂不考虑返程疫情隔离相关费用。\n2）用工为水准测量30天*4个工，控制点埋设及JW梯级各厂址地形复核10天*4个工。', NULL, '2022-10-28', 133040.00, 133040.00, '同意借款。', 83, '情况属实，建议借支。根据现场实际开支需要，分配支用。', 10, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-28', '2022-10-29', '2022-11-01', NULL, NULL, '2022-11-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418860280819', NULL, '1', '海南全岛地形变化较大区域、漏洞区域机载LIDAR数据获取项目', 32, 107, '按2人10天计划，已于10月29日进场开展工作。其他成本为邮寄设备费用。', NULL, '2022-10-31', 11600.00, 11600.00, '同意', 32, NULL, 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-31', '2022-10-31', '2022-11-01', NULL, NULL, '2022-11-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418860290820', '1648881412594204674', '0', NULL, 83, 111, '因黄建春受伤送回成都产生相关费用、因现场植被深厚超出预期，需外业补测的区域较多，故补充申请借款。', NULL, '2022-10-31', 4340.00, 4340.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-31', '2022-10-31', '2022-11-01', NULL, NULL, '2022-11-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418860300821', NULL, '1', '2021年股权交易代垫个税费用', 14, 106, NULL, NULL, '2022-11-09', 337146.00, 337146.00, NULL, 14, '同意', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-09', '2022-11-09', '2022-11-09', NULL, NULL, '2022-11-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418860310822', '1648881412422238210', '0', NULL, 61, 111, '1、本项目预计工期40天，含疫情防控相关事宜及开工准备工作；\n2、公司安排项目生产人员4人，坝前多波速扫描技术指导人员2人（预计10天）；\n3、现场租用船只开展水上作业及通勤，预计30天（单价含油费及船工工资）；\n4、现场需要民工开展临时道路疏通及设备搬运，预计2人、30天；\n5、前期预算借款，后期根据实际情况申请补借。', NULL, '2022-11-17', 57760.00, 57760.00, '按进场后了解的实际情况重新申请，建议借款。', 61, '建议借支。', 10, 2, '同意借款。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-17', '2022-11-18', '2022-11-25', NULL, NULL, '2022-11-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418860320823', NULL, '1', '备用金', 112, 104, '上次申请备用金已用完，请领导批准。谢谢！', NULL, '2022-11-25', 20000.00, 20000.00, '同意。', 112, '同意借款', 2, 2, '可以拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-25', '2022-11-28', '2022-11-28', NULL, NULL, '2022-11-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418860330824', '1648881411847618561', '0', NULL, 61, 111, '1、参与人员4人（含驾驶员），预计工期10天；\n2、坐标转换费用含2个测区；', NULL, '2022-11-29', 10200.00, 11727.00, '情况属实，建议借款。', 61, '增加长河坝抽蓄补充借款1527元，长河坝项目不再增补借款。\n建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-29', '2022-12-05', '2022-12-05', NULL, NULL, '2022-12-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418860340825', '1648881412002807809', '0', NULL, 61, 111, '本次为补充借款，根据项目实际开支情况申请。', NULL, '2022-11-29', 1397.50, 0.00, '情况属实，建议借款', 61, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2022-11-29', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418860350826', '1648881412040556545', '0', NULL, NULL, 108, NULL, NULL, '2022-12-01', 100000.00, 100000.00, '项目负责人用于临聘人员工资发放等。同意借款。需做好临聘人员用工风险、安全风险等问题。', 39, '同意借款', 11, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-01', '2022-12-06', '2022-12-09', NULL, NULL, '2022-12-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418860360827', NULL, '1', '南充市高坪区地质灾害防治工程', NULL, 113, '立项申请资料需省厅地质灾害专家库专家评审签字。', NULL, '2022-12-05', 11200.00, 11200.00, '同意', NULL, '情况属实', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-05', '2022-12-05', '2022-12-05', NULL, NULL, '2022-12-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418860370828', NULL, '1', '11月份电信服务费', 18, 104, '2022年11月份电信服务费用，\n转账信息：中国电信股份有限公司成都分公司\n成都市成华区双林北支路473号 028-84340651\n工行春熙支行营业室 4402209029005401812', NULL, '2022-12-27', 2046.31, 2046.31, '情况属实。', 112, '同意支付。', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-27', '2022-12-27', '2022-12-27', NULL, NULL, '2022-12-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418860380829', '1648881411885367297', '0', NULL, 83, 111, '该项目参与人员为4人，预计现场工作15日。', NULL, '2022-12-10', 11420.00, 11420.00, '同意借款。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-10', '2022-12-15', '2022-12-16', NULL, NULL, '2022-12-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418860390830', '1648881412040556545', '0', NULL, NULL, 108, '项目扫描和内业需要购买大量的二手电脑和扫描仪', NULL, '2022-10-30', 50000.00, 50000.00, '实际生产需求，同意借支。', 39, NULL, 11, 2, '按需支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-31', '2022-10-31', '2022-11-01', NULL, NULL, '2022-11-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418860400831', NULL, '1', '飞马D200S无人机2022年度（2022年11月25日至2023年11月24日）保险', 17, 104, '购买飞马（D200S）2022年度保险，飞机编号为：DSFFCGLS20460247（此架无人机是2021年11月12日保险理赔新机）\n\n转账公司名称：北京飞马航遥科技有限公司   开户银行：中国建设银行北京安慧支行 银行账号：11050186360000000463', NULL, '2022-11-24', 23500.00, 23500.00, '情况属实。', 112, '同意', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-24', '2022-11-25', '2022-11-25', NULL, NULL, '2022-11-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418860410832', '1648881411809869825', '0', NULL, 32, 107, '作业人员于2022年12月5号火车出发，现场部队协调住宿用餐，费用自理。\n计划飞机返程。\n其他费用为两次邮寄设备快递费用：阿克苏-和田地区，和田地区-成都。', NULL, '2022-12-07', 16120.00, 16120.00, '情况属实，同意', 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-07', '2022-12-07', '2022-12-09', NULL, NULL, '2022-12-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418860420833', '1648881412384489473', '0', NULL, 113, NULL, '本次请款79778.74元，时间截止为2023年1月18日。分项如下：项目部购置车辆29000元。两人用餐，50元*2人*40天，合计4000元。现场沟通支出，15000元。办公室和宿舍水电气，合计800元，现场车辆加油1500元。耗材预计3000元，主要用于购买打印纸和硒鼓。其他不可预见开支3000元。前期超出开支23478.74元。综上合计79778.74元。', NULL, '2022-12-09', 79778.74, 79778.74, '情况属实。', 20, '同意借款', 11, 2, '该项目成本须精打细算，须杜绝不必要的开支。由财务视需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-09', '2022-12-09', '2022-12-16', NULL, NULL, '2022-12-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418860430834', '1648881411885367297', '0', NULL, 83, 111, NULL, NULL, '2022-12-12', 15000.00, 15000.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-12', '2022-12-15', '2022-12-16', NULL, NULL, '2022-12-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418860440835', '1648881412204134402', '0', NULL, 83, 111, '该项目测绘工程中心投入3人，司机1名，预计现场工作10日。激光技术部投入1人，司机1名，预计现场工作5日；', NULL, '2022-09-30', 10850.00, 10850.00, '同意借款。', 83, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-09-30', '2022-10-10', '2022-10-10', NULL, NULL, '2022-10-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418860450836', '1648881413328207874', '0', NULL, 48, 109, NULL, NULL, '2022-10-10', 69120.00, 69120.00, '同意。', 46, '拟同意。', 13, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-10-10', '2022-10-10', '2022-10-10', NULL, NULL, '2022-10-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418860460837', NULL, '1', '中铁开发投资集团有限公司云南省滇中引水二期配套工程首级施工控制网设计及建网招标标书费', 23, 105, '截止时间：2022年11月21日前\n账号名称:中铁物贸集团有限公司中铁鲁班招标中心\n银行账号:30207667001112\n开户行:平安银行天津分行营业部\n开户行号:307110004315\n备注：DZYS2-2022-02标书费   ', NULL, '2022-11-16', 1500.00, 1500.00, '已阅核，情况属实。', 13, NULL, 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-17', '2022-11-17', '2022-11-21', NULL, NULL, '2022-11-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418860470838', NULL, '1', '川A1950R、川A99L3B、川A2679R、川A6692U、车辆保险费；川A5177U燃油费', 16, 104, NULL, NULL, '2022-11-21', 20000.00, 20000.00, '拟同意。', 112, '同意借款。', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-11-21', '2022-11-25', '2022-11-25', NULL, NULL, '2022-11-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418860480839', '1648881412422238210', '0', NULL, 61, 111, '1、补充借款，主要因为疫情隔离、员工医疗费垫付、土建费用增加等原因，实际成本增加；\n2、因电厂疫情防控要求，暂时不能进入封闭管理区等原因，项目暂停，后续工作，计划人员3人、预计工期5天（同桐梓林项目一起进出场）；\n3、广告制作费用，用于坝前新增断面管理区内基点指示牌制作；', NULL, '2023-01-10', 16738.90, 16738.90, '建议借款', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-01-10', '2023-02-13', '2023-02-15', NULL, NULL, '2023-02-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418860490840', '1648881411705012226', '0', NULL, 59, NULL, '本次借款为项目部组织人员实施的劳务费用（第二次）\n1、3项工作量，12月19日已按单价的70%借款支付（75999元），本次按单价的30%借款支付；\n2、4项为最终新增的工作量，项目已完成，本次按全价借款支付临时人员；\n第5项为正在开展的工作，项目部组织的人员预计完成2100个，按年前支付60%借支（单价35元乘以60%=21元）。', NULL, '2023-01-09', 99746.00, 99746.00, '情况属实。', 20, '已核实，同意借款', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-01-09', '2023-01-09', '2023-01-12', NULL, NULL, '2023-01-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418860500841', '1648881412384489473', '0', NULL, 113, NULL, '试点人员成本：六个工天，每天400元，包含食宿和绩效，共计2400元；人员进出场费用，5人进出两次，每次200元，共2000元。交通费，两次，每次两辆车，每车900元，共计1800元，其他花费：2000元；项目部房租6722元，物业费1680元。综上，合计费用16602元。', NULL, '2023-01-10', 16602.00, 16602.00, '情况属实。', 20, '同意借款', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-01-11', '2023-01-11', '2023-01-12', NULL, NULL, '2023-01-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418860510842', NULL, '1', '天星坝激光数据采集', 32, 107, '天星坝补飞，按实际费用申请。', NULL, '2023-01-11', 2232.00, 2232.00, '情况属实', 32, '同意借款', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-01-11', '2023-01-11', '2023-01-12', NULL, NULL, '2023-01-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418860520843', NULL, '1', '备用金', 112, 104, '年终干部会等其他必要开支，特申请备用金，请领导批准。', NULL, '2023-01-13', 30000.00, 30000.00, '同意。', 112, '同意', 2, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-01-13', '2023-01-13', '2023-01-13', NULL, NULL, '2023-01-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418860530844', NULL, '1', '测绘局购买资料（绵阳安州至北川高速公路工程测绘工作）', 52, 109, '银行账户：5116 1001 5018 1701 64580\n开户行：交通银行股份有限公司成都创业路支行\n统一社会信用代码：12100000717820559X\n地址：四川省成都市九兴大道7号\n电话：028-66065495', NULL, '2023-01-13', 28050.00, 28050.00, '同意。', 46, '同意。', 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-01-13', '2023-01-13', '2023-01-13', NULL, NULL, '2023-01-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418860540845', '1648881414037045250', '0', NULL, 83, 111, '因甲方增加了测绘范围，杨晶、张杰及租车司机次仁罗布前往开展相关工作，现场工作了6天。', NULL, '2023-01-14', 7020.00, 7020.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-01-14', '2023-01-17', '2023-01-18', NULL, NULL, '2023-02-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418860550846', '1648881410643853314', '0', NULL, 71, 110, '公对公转账\n单位名称:自然资源部大地测量数据处理中心\n税号: 121000004352305425\n开户行:中行西安南关支行\n银行账号: 102807336260\n行号: 104791004551\n地址:陕西西安碑林区友谊东路334号\n电话: 029-87604124', NULL, '2023-05-05', 2000.00, 2000.00, '情况属实，建议借款', 61, '同意', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-05', '2023-05-05', '2023-05-05', NULL, NULL, '2023-05-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418860560847', '1648881411499491385', '0', NULL, 61, 110, '本期主要开展横断面测量及2-3组水面线测量工作，预计投入人员4人（含驾驶员），预计工期12天；', NULL, '2023-05-05', 7720.00, 7720.00, '情况属实，建议借款。', 61, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-05', '2023-05-08', '2023-05-08', NULL, NULL, '2023-05-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418860570848', NULL, '1', '礼仪培训预付款', 58, 104, '账户名称：启帆企业管理有限公司；开户行：中国建设银行股份有限公司成都新华支行；账号：51050187083600002836', NULL, '2023-05-08', 16100.00, 0.00, '情况属实，同意办理', 8, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-05-08', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418860580849', '1648881410631270403', '0', NULL, 33, 107, '现场3人，计划9天（包含进出场）。', NULL, '2023-05-10', 6120.00, 6120.00, '已于5月8号进场。同意', 32, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-11', '2023-05-12', '2023-05-15', NULL, NULL, '2023-05-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418860590850', NULL, '1', '水利水电测绘信息网2023年度网费', 52, 109, '单位：长江空间信息技术工程有限公司(武汉）\n开户银行：建行武汉水利支行\n账号：42001116256053000365', NULL, '2023-05-15', 3000.00, 3000.00, '情况属实。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-15', '2023-05-15', '2023-05-15', NULL, NULL, '2023-05-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418860600851', '1648881410643853314', '0', NULL, 71, 110, '拉萨河流域（聂当至茶巴朗段）计算1985国家高程基准成果费用\n公对公转账\n单位名称:自然资源部大地测量数据处理中心\n税号: 121000004352305425\n开户行:中行西安南关支行\n银行账号: 102807336260\n行号: 104791004551\n地址:陕西西安碑林区友谊东路334号\n电话: 029-87604124', NULL, '2023-05-15', 2000.00, 2000.00, '情况属实，建议借款。', 61, '同意支付', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-15', '2023-05-15', '2023-05-16', NULL, NULL, '2023-05-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418860610852', '1648881410832596993', '0', NULL, NULL, 110, '1、项目计划投入人员4人（含驾驶员），预计工期20天（施工控制网）；\n2、现场需要请民工。', NULL, '2023-03-14', 22400.00, 22400.00, '叶巴滩现场消费较高，本项目涉及水下作业需要请民工，建议支付', NULL, '建议借支。', 10, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-03-14', '2023-03-14', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418860620853', NULL, '1', '家属接待', 8, 104, NULL, NULL, '2023-03-22', 35000.00, 35000.00, '情况属实，同意办理', 8, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-22', '2023-03-22', '2023-03-22', NULL, NULL, '2023-03-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418860630854', '1648881412090888194', '0', NULL, 101, 112, '本项目于2023年2月14日进场开展现场工作，参与人员：高强、彭永红、马如坤等三人，现场工作于3月15日结束并返回拉萨。目前人员已投入羊湖项目生产中，本次借款为后补充借款。', NULL, '2023-03-29', 53300.00, 53300.00, '情况属实，根据现场实际支出需要补充借款。', 101, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-29', '2023-03-30', '2023-04-04', NULL, NULL, '2023-04-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418860640855', NULL, '1', '办公区日常维护', 19, 104, '1.C座办公区二楼204墙面做整改。涉及到人工费与材料费，共计3500元，施工面积21.6个平方，现已完成，并签了施工完工确认单。\n2.商务接待费用包括23日门票及用餐费用。', NULL, '2023-04-24', 4640.00, 0.00, '情况属实，同意办理', 8, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-04-24', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418860650856', '1648881411235250178', '0', NULL, 83, 111, '1）根据目前的工作进度，预计需工作至6月底。前期已按两月工期借款，本次食宿费用按26人*60天进行计算；\n2）因项目持续周期较长，安排组长适时进行轮休；\n3）开展确认签字工作、公示工作、JW背崩区域调查工作时需要长期租用车辆；\n4）第四项为采购少量药品及确认签字及公示期间打印文件等费用；\n5）其它零星开支为现场开展工作时与多方协调关系所产生的费用。', NULL, '2023-05-06', 463000.00, 210000.00, '同意借款。', 83, '本项目前期已借支39万，本期同意借支21万元。\n后续如需借支，请据实提交开支状况审核。\n建议借支。', 10, 2, '同意按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-06', '2023-05-16', '2023-05-17', NULL, NULL, '2023-05-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418860660857', NULL, '1', '大渡河公司大岗山水电站大坝及库岸边坡监测设备设施完善工程中标服务费', 26, 105, NULL, NULL, '2023-05-17', 83975.90, 83975.90, '已核，情况属实。', 13, '同意。', 13, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-17', '2023-05-17', '2023-05-17', NULL, NULL, '2023-05-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418860670858', NULL, '1', '西藏雅下项目检查', 9, 102, NULL, NULL, '2023-05-18', 26500.00, 26500.00, NULL, NULL, '同意', 2, 2, '按时拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, NULL, '2023-05-18', '2023-05-18', NULL, NULL, '2023-05-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418860680859', '1648881411138781186', '0', NULL, 33, 107, '一共4个人，预计10天（包含进出场4天）。', NULL, '2023-05-18', 10000.00, 10000.00, '计划5月22号出发', 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-19', '2023-05-19', '2023-05-21', NULL, NULL, '2023-05-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418860690860', '1648881410866151425', '0', NULL, 83, 111, '采购卫星影像数据进行1:5000地形图生产。', NULL, '2023-05-19', 30000.00, 30000.00, '同意。', 83, '建议借支。', 10, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-19', '2023-05-19', '2023-05-21', NULL, NULL, '2023-05-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418860700861', '1648881411499491387', '0', NULL, 83, 111, '该项目已结束，根据现场实际开支借款，现场开支费用由杨振暂垫付。', NULL, '2023-05-19', 5960.00, 5960.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-19', '2023-05-19', '2023-05-21', NULL, NULL, '2023-05-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418860710862', NULL, '1', '四川省地理信息产业协会2023年度会费', 52, 109, '户名：四川省地理信息产业协会\n开户行：中信银行成都紫荆支行\n账号：8111 0010 1330 0013 443\n备注内容：2023年度会费', NULL, '2023-05-19', 20000.00, 20000.00, '情况属实。', 46, NULL, 9, 2, '同意。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-19', '2023-05-22', '2023-05-25', NULL, NULL, '2023-05-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418860720863', NULL, '1', '公司5月份C208、C219、C313、C312、C311房间（搬运、归置、更换，电线网络布线、防水墙处理材料费，人工费', 19, 104, '项目：C219插孔安装，C313、C312吊顶铝扣板，C313、C312新换灯具，桌面穿线孔，502胶水，垃圾费，24口交换机，线槽，电线，工位网络面板，C219新换灯具，墙面防水处理（C313、C312、C311)及三个房间物品搬运费，C313、C312网络布线人工费，C313、C312电线布线人工费，C313、C312插孔。等所有项目费用。具体金额见附件明细。', NULL, '2023-05-19', 11331.90, 0.00, '情况属实，同意借款', 8, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-05-20', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418860730864', NULL, '1', '2023年最新社保知识培训', 18, 104, '2023年最新社保知识培训（6月10日）；简鑫一人参加。\n单位名称：成都人才有限责任公司\n开户行账号：51001446408051500791\n开户行：中国建设银行股份有限公司成都金仙桥支行', NULL, '2023-05-22', 680.00, 680.00, '情况属实，建议借款', 8, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-23', '2023-05-29', '2023-05-29', NULL, NULL, '2023-05-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418860740865', NULL, '1', '中旭集团  管理人员培训', 8, 104, '账户名：深圳市中旭教育科技有限公司成都分公司\n账号：2289 1201 0400 4294 3\n开户行：中国农业银行股份有限公司成都青羊支行', NULL, '2023-02-13', 2950.00, 2950.00, '情况属实', 8, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-13', '2023-02-15', '2023-02-15', NULL, NULL, '2023-02-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418860750866', '1648881411159752705', '0', NULL, NULL, 110, '1、项目计划投入人员3人（含驾驶员），预计工期9天；\n2、现场需要租用机动船。', NULL, '2023-02-13', 7660.00, 7660.00, '按已实际工作预算，情况属实，建议借款。', NULL, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-13', '2023-02-14', '2023-02-15', NULL, NULL, '2023-02-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418860760867', '1648881410832596993', '0', NULL, 33, 107, '一共4人、进出场共4天。', NULL, '2023-03-04', 10200.00, 10200.00, '同意', 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-04', '2023-03-07', '2023-03-09', NULL, NULL, '2023-03-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418860770868', NULL, '1', '智能印章平台服务费（公章）', 18, 104, '平台服务费：1280元/枚/年\n转账信息：\n户名：北京国印网安科技有限公司，\n开户行：浙商银行股份有限公司北京朝阳支行，\n账号：1000000510120100027783', NULL, '2023-03-23', 1280.00, 1280.00, '情况属实，同意办理', 8, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-23', '2023-03-25', '2023-03-25', NULL, NULL, '2023-03-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418860780869', NULL, '1', '地下管线成果整理制作协议', 148, NULL, '申请向成都市城市建设和自然资源档案馆转账支付该笔费用。转账时请备注协议编号，协议编号、银行账号见附件。', NULL, '2023-03-31', 5250.00, 5250.00, '情况属实。', 112, '同意支付，项目结算时扣除该费用', 11, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-31', '2023-03-31', '2023-04-13', NULL, NULL, '2023-04-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418860790870', NULL, '1', '海南省文昌1：1000地形测绘项目前期经费', NULL, 113, NULL, NULL, '2023-05-17', 30000.00, 30000.00, '同意', NULL, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-17', '2023-05-17', '2023-05-17', NULL, NULL, '2023-05-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418860800871', NULL, '1', '2021G33 成都市成华区地下管线普查更新探测服务（第2包）技术服务协议', 59, NULL, '费用由合作单位四川智绘地理信息科技有限公司承担，费用于2023年5月23日前到账，到账后公司再打款。打款对象：成都市城市建设和自然资源档案馆，账号见附件。', NULL, '2023-05-18', 2450.00, 2450.00, '情况属实。', 112, '同意', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-18', '2023-05-18', '2023-05-18', NULL, NULL, '2023-05-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418860810872', NULL, '1', '中标服务费', 24, 105, '三圣街道办事处拆迁航拍、测绘服务项目代理服务费：\n金  额：7000.00元（大写：柒仟元整）\n转账方式：公对公\n名称:四川问道工程管理咨询有限公司\n开户银行:中国农业银行股份有限公司成都锦西支行\n银行账号：22910401040020652\n（品牌项目方已支付）', NULL, '2023-05-19', 7000.00, 7000.00, '已核，情况属实。', 13, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-19', '2023-05-24', '2023-05-25', NULL, NULL, '2023-05-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418860820873', '1648881411331719170', '0', NULL, 102, 112, '二滩和桐子林监测项目5月成本支出，详见成本预算表。', NULL, '2023-05-22', 34724.00, 34724.00, '拟同意', 101, '同意', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-22', '2023-05-24', '2023-05-29', NULL, NULL, '2023-05-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418860830874', '1648881410643853314', '0', NULL, 71, 110, '飞行组3人，聂当段航飞6天（5月17日至5月22日），住宿费约200*12=2400元，用餐成本18*100=1800元，车辆加油300*6=1800元。\n项目管理生产2人5月21日至6月10日共计20天，住宿200*20=4000元，用餐成本40*100=4000元。', NULL, '2023-05-22', 18000.00, 18000.00, '情况属实，建议借款', 61, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-26', '2023-05-26', '2023-05-29', NULL, NULL, '2023-05-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418860840875', '1648881411499491384', '0', NULL, 83, 111, '该项目由夏志军、徐志勇、雷光泽负责，预计现场工作10日。', NULL, '2023-05-23', 6000.00, 6000.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-23', '2023-05-23', '2023-05-29', NULL, NULL, '2023-05-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418860850876', NULL, '1', '办公费用借款', 8, 104, NULL, NULL, '2023-05-25', 30000.00, 30000.00, '情况属实，同意办理', 8, '同意', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-25', '2023-05-29', '2023-05-29', NULL, NULL, '2023-05-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418860860877', '1648881415815430146', '0', NULL, 138, 114, NULL, NULL, '2023-02-27', 85380.00, 85380.00, '同意借款。', 142, '同意借款', 11, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-01', '2023-03-06', '2023-03-09', NULL, NULL, '2023-03-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418860870878', NULL, '1', '高效招聘与精准面试课程两人培训费', 18, 104, '培训参与人：徐婷、简鑫\n转账信息：\n单位名称：成都人才有限责任公司\n开户行账号：51001446408051500791\n开户行：中国建设银行股份有限公司成都金仙桥支行', NULL, '2023-02-08', 1360.00, 1360.00, NULL, 8, '同意', 2, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-08', '2023-02-10', '2023-02-10', NULL, NULL, '2023-02-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418860880879', NULL, '1', '四川省测绘地理信息学会2023年会费', 52, 109, '开户名称：四川省测绘地理信息学会\n开户行：中国银行成都银都支行\n账户：1306 5874 9641\n联系电话 028-66065569', NULL, '2023-03-07', 13000.00, 13000.00, '同意，情况属实。', 46, '同意。', 9, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-09', '2023-03-09', '2023-03-09', NULL, NULL, '2023-03-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418860890880', NULL, '1', '意外事故家属接待', 8, 104, NULL, NULL, '2023-03-22', 50000.00, 50000.00, '情况属实，同意办理', 8, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-22', '2023-03-22', '2023-03-22', NULL, NULL, '2023-03-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418860900881', NULL, '1', '意外事故处理借款', 8, 104, NULL, NULL, '2023-03-27', 50000.00, 50000.00, '情况属实，同意办理', 8, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-27', '2023-03-27', '2023-03-27', NULL, NULL, '2023-03-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418860910882', '1648881415815430146', '0', NULL, 138, 114, NULL, NULL, '2023-03-29', 96375.00, 96375.00, '同意借款。', 142, '拟同意。', 13, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-29', '2023-04-06', '2023-04-13', NULL, NULL, '2023-04-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418860920883', '1648881410643853314', '0', NULL, 71, 110, '住宿成本、用餐成本：杨为康1人，预计至25号，共18天，机票：杨为康1人进出场机票。设备托运：无人船设备来回托运费用。', NULL, '2023-04-07', 9500.00, 9500.00, '情况属实，建议借款', 61, '同意', 11, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-08', '2023-04-11', '2023-04-12', NULL, NULL, '2023-04-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418860930884', NULL, '1', '公司商务接待、内部接待、礼品购买', 8, 104, NULL, NULL, '2023-04-12', 30000.00, 30000.00, '情况属实，同意办理', 8, '同意', 2, 2, '可以拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-12', '2023-04-13', '2023-04-13', NULL, NULL, '2023-04-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418860940885', '1648881410572550145', '0', NULL, NULL, 111, NULL, NULL, '2023-04-13', 518.00, 0.00, '同意', 84, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-04-15', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418860950886', '1648881410534801409', '0', NULL, NULL, 111, '已发生开销，外业已结束', NULL, '2023-04-17', 585.00, 0.00, '同意', 84, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-04-17', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418860960887', '1648881410480275457', '0', NULL, 33, 107, '现场3人，计划5天(包含进出场)。', NULL, '2023-04-17', 5450.00, 5450.00, '同意借款', 33, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-17', '2023-04-17', '2023-04-19', NULL, NULL, '2023-04-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418860970888', NULL, '1', '青海公司玛尔挡水电站水库泥沙监测服务项目履约保函担保费', 30, 104, '青海公司玛尔挡水电站水库泥沙监测服务项目履约保函担保费\n账户名：深圳市正泓融资担保有限公司\n账号：44201618500059188888', NULL, '2023-04-24', 30000.00, 30000.00, '同意办理', 14, '同意支付。', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-24', '2023-04-24', '2023-04-24', NULL, NULL, '2023-04-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418860980889', NULL, '1', '购买测绘资料（道孚抽水蓄能电站）', 52, 104, '成勘院规划院需要购买道孚抽水蓄能电站矢量化图资料', NULL, '2023-05-12', 21000.00, 21000.00, '情况属实。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-12', '2023-05-12', '2023-05-15', NULL, NULL, '2023-05-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418860990890', NULL, '1', '邻水县中城寨石场铸型用砂岩资源勘查、邻水县彭家梁饰面用砂岩资源勘查、邻水县梁板清水铸型用砂岩资源勘查', 26, 105, NULL, NULL, '2023-05-17', 200.00, 200.00, '已核，情况属实。', 13, '拟同意。', 13, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-18', '2023-05-18', '2023-05-18', NULL, NULL, '2023-05-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418861000891', NULL, '1', '2023年1月电信网络宽带费用', 18, 104, '转账信息：中国电信股份有限公司成都分公司\n成都市成华区双林北支路473号 028-84340651\n工行春熙支行营业室 4402209029005401812', NULL, '2023-02-08', 2049.67, 2049.67, NULL, 8, '同意支付。', 2, 2, '为避免因欠费断网，尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-08', '2023-02-10', '2023-02-10', NULL, NULL, '2023-02-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418861010892', NULL, '1', '新员工人身意外伤害保险', 58, 104, '户名：泰康养老保险股份有限公司四川分公司；账号：1000080004778685；开户行：成都农村商业银行股份有限公司；联行号：314651000000', NULL, '2023-02-14', 687.13, 687.13, '同意', 8, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-14', '2023-02-15', '2023-02-15', NULL, NULL, '2023-02-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418861020893', NULL, '1', '四川中水成勘院测绘工程公司  2个cors账号sczsck02、sczsck03年费一年（2023）', 52, 109, 'SCCORS技术服务费收费账号\n单位名称：自然资源部第三大地测量队\n开户行：建行成都经济技术开发区支行\n账 号：5100 1556 8080 5012 6868', NULL, '2023-02-20', 12800.00, 12800.00, '情况属实，为项目使用。同意。', 46, NULL, 9, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-20', '2023-02-20', '2023-02-21', NULL, NULL, '2023-02-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418861030894', '1648881410912288769', '0', NULL, 32, 107, '2023.2.25进场，2023.2.28出场，王刚、万龙卿、熊艳华三人。按实际开销', NULL, '2023-02-28', 1716.00, 1716.00, '同意', 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-28', '2023-03-01', '2023-03-03', NULL, NULL, '2023-03-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418861040895', '1648881411067478017', '0', NULL, 61, 110, '1、参与人员按先进场5人计算（含司机），预计工期60天；\n2、民工费及租船费为预估单价及数量；\n3、本次借款为前期借款，后续根据实际情况补充借款；', NULL, '2023-03-03', 169040.00, 50000.00, '预算费用，建议借款。', 61, '建议借支5万元，及时开展工作。\n在掌握测区交通、租船费用、临聘用工费用等，及时提交项目预算，经审批后按预算表执行借款及后期项目结算。\n建议借支。', 10, 2, '同意按照上述审批意见拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-03', '2023-03-09', '2023-03-13', NULL, NULL, '2023-03-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418861050896', '1648881411331719170', '0', NULL, 102, 104, '二滩和桐子林监测项目，2月成本支出。', NULL, '2023-03-06', 31176.00, 31176.00, '拟同意，尽快向管理局完成2022年成果资料归档，及早完成2022年四季度合同总额40%收款工作。', 101, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-06', '2023-03-07', '2023-03-09', NULL, NULL, '2023-03-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418861060897', NULL, '1', '2023年2月电信宽带服务费', 18, 104, '转账信息：\n中国电信股份有限公司成都分公司\n成都市成华区双林北支路473号 028-84340651\n工行春熙支行营业室 4402209029005401812', NULL, '2023-03-09', 2039.35, 2039.35, '情况属实，同意办理', 8, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-09', '2023-03-09', '2023-03-09', NULL, NULL, '2023-03-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418861070898', '1648881416603959298', '0', NULL, 83, 111, '该项目新增了横断面测量工作，预计现场工作5日。该项目由杨振、杨晶、及租车司机永宗达娃参与。', NULL, '2022-12-16', 6200.00, 6200.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-16', '2022-12-28', '2022-12-29', NULL, NULL, '2022-12-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418861080899', '1648881411705012226', '0', NULL, 59, NULL, '说明：开支时段为11月初至12月15日，动态监测每个举证图斑价格35元，耕地恢复40元，上表单价为最终价的70%，即外业人员出场时的应付款。余下尾款年前支付，纳入下个月借款额度。本次借款为自建团队费用，委外单位费用，后续以协议约定办理。', NULL, '2022-12-19', 75999.00, 75999.00, '情况属实，建议借款。', 20, '同意借款', 11, 2, '提前介入类项目，严格预算管理，按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-20', '2022-12-20', '2022-12-23', NULL, NULL, '2022-12-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418861090900', '1648881418239737858', '0', NULL, 59, NULL, '甲方要求在12月23日前须打款！！\n开户单位：泸县不动产登记中心 帐号：2304348609201025669  开户行：工行泸县支行', NULL, '2022-12-22', 44175.00, 44175.00, '建议借款', 20, '同意借款，借款后公对公转账，收到发票后冲抵借款', 11, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-22', '2022-12-22', '2022-12-23', NULL, NULL, '2022-12-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418861100901', '1648881411667263489', '0', NULL, NULL, 113, '现场人员生活及外业开展车辆租赁等生产费用', NULL, '2022-12-22', 20000.00, 20000.00, '情况属实', NULL, '同意借款', 11, 2, '同意拨付，公司分派项目，记入勘察设计事业部成本。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2022-12-22', '2022-12-22', '2022-12-23', NULL, NULL, '2022-12-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418861110902', NULL, '1', '泸县 2021 年耕地“进出平衡”目标考核整改专项工作中标代理服务费', 25, 105, '泸县 2021 年耕地“进出平衡”目标考核整改专项工作中标代理服务费', NULL, '2023-01-05', 10650.00, 10650.00, '已核，情况属实。', 13, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-01-05', '2023-01-06', '2023-01-11', NULL, NULL, '2023-01-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418861120903', NULL, '1', '购买新员工谢辉波意外伤害保险', 58, 104, '户名：泰康养老保险股份有限公司四川分公司；账号：1000080004778685；开户行：成都农村商业银行股份有限公司；联行号：314651000000', NULL, '2023-02-16', 681.09, 681.09, NULL, 8, '同意借款。', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-16', '2023-02-21', '2023-02-21', NULL, NULL, '2023-02-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418861130904', '1648881412384489473', '0', NULL, 113, NULL, '本次借款用于广元昭化林权权籍补充调查服务项目。其中档案袋定做64000个，单价0.45元，物流2000元，共计30800元；用餐成本：项目部两人两月用餐费用，每人每天60元。共计7200元；车辆费用，包含车辆加油费3000元，保养500元，保险2337元，共计5837元；耗材成本：现场打印花费，每张A4纸打印0.03元，本次预计50万张纸打印，共计15000元，本次打印纸共计110件，年前10件，每件150元，年后100件，每件133元，共计14800元；打印机押金5000元；水电等其他花费5000元。综上，本次借款共计83637元。', NULL, '2023-03-01', 83637.00, 83637.00, '建议借款。', 112, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-01', '2023-03-01', '2023-03-06', NULL, NULL, '2023-03-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418861140905', '1648881410610298882', '0', NULL, 116, 113, '含便道修建、现场临建设施、蓄水池、人员/设备进出场、远距离人员搬迁、场内二次转运、岩芯转运搬迁、机场平整、高山送水、林业占地赔尝等相关勘探钻孔的所有工作。', NULL, '2023-04-10', 35000.00, 35000.00, '同意', NULL, '同意拨付', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-04-11', '2023-04-12', '2023-04-12', NULL, NULL, '2023-04-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418861150906', NULL, '1', '2023信息体系外部审核（扩大、监督）', 52, 109, '收款单位：北京中大华远认证中心有限公司四川分公司\n开户银行：中信银行股份有限公司成都武侯支行\n账 号：7413310182600013961', NULL, '2023-04-10', 17000.00, 17000.00, '情况属实。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-10', '2023-04-10', '2023-04-13', NULL, NULL, '2023-04-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418861160907', '1648881410778071042', '0', NULL, 32, 107, '由于前期人员机票开销及飞马技术人员开销问题，特追加此次借款申请。\n按4人（含司机），按20天计划申请。', NULL, '2023-04-17', 20000.00, 20000.00, '同意', 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-17', '2023-04-17', '2023-04-19', NULL, NULL, '2023-04-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418861170908', NULL, '1', '青海公司玛尔挡水电站水库泥沙监测服务', 25, 105, '中标服务费     大写：伍万叁仟玖佰玖拾陆元壹角伍分   小写：53996.15元      注：以附件的交费信息里面的金额为准！ ', NULL, '2023-04-17', 53996.20, 53996.20, '已核，情况属实。', 13, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-17', '2023-04-17', '2023-04-19', NULL, NULL, '2023-04-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418861180909', NULL, '1', '测绘局购买资料（四川省理塘县抽水蓄能水电站规划地形测绘）', 52, 109, NULL, NULL, '2023-04-17', 6375.00, 6375.00, '根据项目需要购买矢量数据，情况属实。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-17', '2023-04-17', '2023-04-19', NULL, NULL, '2023-04-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418861190910', '1648881415815430146', '0', NULL, 138, 114, NULL, NULL, '2023-05-05', 107160.00, 107160.00, '同意按此金额借款。', 142, '已核，建议借支。', 13, 2, '按需支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-06', '2023-05-09', '2023-05-09', NULL, NULL, '2023-05-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418861200911', NULL, '1', '川A2239Q保险费用；川A5177U燃油费用；项目租车支付部分费用15000元。', 16, 104, '目前已垫付8000元左右', NULL, '2023-05-06', 30000.00, 30000.00, '同意', 8, '同意', 2, 2, '可以拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-08', '2023-05-08', '2023-05-08', NULL, NULL, '2023-05-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418861210912', NULL, '1', '2023年4月电信网络宽带费用', 18, 104, '转账信息：\n中国电信股份有限公司成都分公司\n成都市成华区双林北支路473号 028-84340651\n工行春熙支行营业室 4402209029005401812', NULL, '2023-05-08', 1068.29, 1068.29, '情况属实，同意办理', 8, '同意', 2, 2, '可以支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-08', '2023-05-09', '2023-05-09', NULL, NULL, '2023-05-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418861220913', '1648881414544556034', '0', NULL, 21, 104, '专家评审费用（自规局、住建局、财政局、林业局）', NULL, '2023-05-08', 8000.00, 8000.00, '情况属实。', 13, '同意借款', 11, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-09', '2023-05-09', '2023-05-15', NULL, NULL, '2023-05-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418861230914', '1648881411457548290', '0', NULL, 61, 110, '1、外业组4人（含驾驶员），预计工期18天（含进出场）；\n2、飞行组3人（含驾驶员），预计工期5天（含进出场）；\n3、水准测量预计工期10天，需要民工1人；', NULL, '2023-02-06', 18920.00, 15460.00, '已核实，建议借款。', 61, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-06', '2023-02-08', '2023-02-08', NULL, NULL, '2023-02-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418861240915', '1648881413844107265', '0', NULL, 101, 112, '猴子岩水电站外部变形监测项目竣工资料整编及移交等工作现场支出费用，涉及到项目沟通及宴请（预估），需多次晚往返于现场。', NULL, '2023-02-23', 20000.00, 20000.00, '请领导审批，如有不详之处，随时沟通。', 101, '同意', 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-23', '2023-02-27', '2023-03-03', NULL, NULL, '2023-03-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418861250916', '1648881410929065985', '0', NULL, 84, 111, '1、本项目飞行组3人含驾驶员，预计工期6天，共18人/天。\n2、坐标系统转换', NULL, '2023-02-26', 5700.00, 5700.00, '同意借款', 84, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-26', '2023-02-27', '2023-02-27', NULL, NULL, '2023-03-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418861260917', NULL, '1', '武汉天际航DP软件建模培训', 43, 108, '参与培训人员：赵芩、杨玉婧；学习地点：武汉；学习时间：2023年3月19日至2023年3月24日。', NULL, '2023-03-13', 5100.00, 5100.00, '去武汉天际航数据处理公司进行DP软件单体化建模修模训练，注意安全，据实报销。', 39, '同意。', 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-14', '2023-03-15', '2023-03-21', NULL, NULL, '2023-03-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418861270918', NULL, '1', '购买实习生蒋欣瑜保险', 58, 104, '户名：泰康养老保险股份有限公司四川分公司；账号：1000080004778685；开户行：成都农村商业银行股份有限公司；联行号：314651000000', NULL, '2023-02-28', 644.93, 644.93, '情况属实，同意办理', 8, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-01', '2023-03-03', '2023-03-03', NULL, NULL, '2023-03-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418861280919', '1648881411017146369', '0', NULL, 61, 110, '项目参与人员4人（含驾驶员），预计工期15天；', NULL, '2023-03-01', 11600.00, 11600.00, '建议借款', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-01', '2023-03-01', '2023-03-03', NULL, NULL, '2023-03-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418861290920', '1648881410849374209', '0', NULL, 32, 107, '大邑外业调绘、检查点测量，按4天计划，含进出场', NULL, '2023-03-09', 1970.00, 1970.00, '同意', 32, '建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-09', '2023-03-09', '2023-03-09', NULL, NULL, '2023-03-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418861300921', '1648881410832596993', '0', NULL, 33, 107, '三等GNSS测量、三等三角高程、一共4人。', NULL, '2023-03-14', 6960.00, 6960.00, '同意', 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-15', '2023-03-18', '2023-03-22', NULL, NULL, '2023-03-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418861310922', '1648881410761293825', '0', NULL, 102, 112, '盐源县测量标志普查维护，前期土建工作成本预算。', NULL, '2023-03-17', 20640.00, 20640.00, NULL, 102, '同意', 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-17', '2023-03-21', '2023-03-21', NULL, NULL, '2023-03-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418861320923', '1648881411331719170', '0', NULL, 102, 112, '二滩监测项目3月成本支出。', NULL, '2023-03-30', 34780.00, 34780.00, '同意。', 101, '同意', 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-31', '2023-03-31', '2023-04-04', NULL, NULL, '2023-04-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418861330924', NULL, '1', '3.19叶巴滩事故处理', 112, NULL, '借款已到账，补办借款手续。', NULL, '2023-04-10', 50000.00, 50000.00, '情况属实。', 112, '同意借款', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-10', '2023-04-11', '2023-04-12', NULL, NULL, '2023-04-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418861340925', '1648881410710962177', '0', NULL, 83, 111, '1）本项目由杨振、杨晶、次仁罗布（地面组）王刚、万龙卿、刘晓滨、陈建贤（飞行组）参与，现场工作时间4天；\n2）由于D20设备配件多，一个车装不下。又因测区路况较差需要租用丰田普拉多越野车开展地面组测绘工作；\n3）该项目费用由杨振垫付，借款为实际开支金额。', NULL, '2023-04-17', 11142.00, 11142.00, '同意。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-17', '2023-04-18', '2023-04-19', NULL, NULL, '2023-04-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418861350926', '1648881411105226753', '0', NULL, 84, 111, '1.飞行组3人含驾驶员，预计工期5天\n2.外业调绘组暂定3人含驾驶员，预计工期4天。', NULL, '2023-02-08', 8400.00, 8400.00, '同意借款', 84, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-08', '2023-02-09', '2023-02-10', NULL, NULL, '2023-02-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418861360927', '1648881411331719170', '0', NULL, 102, 112, '2023年1月二滩和桐子林监测开支，增加民工保险和体检费用。', NULL, '2023-02-12', 40540.00, 40540.00, '拟同意。', 101, '已核', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-13', '2023-02-14', '2023-02-15', NULL, NULL, '2023-02-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418861370928', '1648881414527778817', '0', NULL, 101, 112, '本项目为老木孔航电枢纽工程施工测量控制网点位恢复及观测项目（2023年4月中旬进场）。参与人员：周全、邓静、彭永红、雷光泽。工期预计一个月（选点加土建预计12天，观测预计18天）', NULL, '2023-04-11', 34450.00, 34450.00, '计划本周五进场（4月14日），上述费用为预估经费。', 101, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-11', '2023-04-11', '2023-04-12', NULL, NULL, '2023-04-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418861380929', NULL, '1', '招聘服务费', 18, 104, '2023/2/28-2024/2/27智联平台服务费；\n转账信息：\n开户名称：北京网聘咨询有限公司成都分公司，\n开户行：招商银行成都分行顺城大街分行，\n账号：128910760410801', NULL, '2023-02-27', 5680.00, 5680.00, '同意 ', 8, '同意。', 2, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-28', '2023-03-03', '2023-03-03', NULL, NULL, '2023-03-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418861390930', '1648881411906338818', '0', NULL, NULL, 113, '简阳元灯社区砂石储量调查项目相关费用', NULL, '2023-03-02', 12300.00, 12300.00, '情况属实，同意借款！', NULL, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-02', '2023-03-07', '2023-03-07', NULL, NULL, '2023-03-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418861400931', NULL, '1', '意外事故处理', 8, 104, NULL, NULL, '2023-03-22', 70000.00, 70000.00, '情况属实，同意办理', 8, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-22', '2023-03-22', '2023-03-22', NULL, NULL, '2023-03-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418861410932', '1648881410778071042', '0', NULL, 32, 107, '项目成本为空域及机场协调费用。\n按3人（含司机）30天计划。\n此借款只考虑数据采集人员费用。', NULL, '2023-03-23', 47200.00, 47200.00, '正在办理空域申请手续。', 32, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-23', '2023-03-27', '2023-03-27', NULL, NULL, '2023-03-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418861420933', NULL, '1', '国网西藏那曲供电公司查龙水电站2021年度监测资料整编、分析项目', 25, 105, '中标服务费', NULL, '2023-03-27', 6253.00, 6253.00, '已核，情况属实。', 13, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-27', '2023-03-27', '2023-03-27', NULL, NULL, '2023-03-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418861430934', '1648881410899705858', '0', NULL, 61, 110, '1、项目参与人员2人，预计工期25天；\n2、现场租车开展工作，单价含油费；', NULL, '2023-03-29', 103935.00, 91435.00, '情况属实，建议借款。', 61, '车辆由综合事务部安排。\n情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-29', '2023-03-30', '2023-04-04', NULL, NULL, '2023-04-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418861440935', NULL, '1', '国网拉萨发电公司2023年直孔、羊湖电站变形监测及资料整编', 25, 105, '中标服务费        注：金额以附件代理服务费通知书为准！   缴费请备注：31CW01-9003001-9999包2+中标服务费', NULL, '2023-04-19', 14294.00, 14294.00, '已核，情况属实。', 13, '同意', 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-19', '2023-04-20', '2023-04-24', NULL, NULL, '2023-04-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418861450936', '1648881410555772930', '0', NULL, 33, 107, '现场3人', NULL, '2023-04-24', 1720.00, 1720.00, '同意借款', 33, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-24', '2023-04-26', '2023-05-01', NULL, NULL, '2023-05-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418861460937', '1648881411067478017', '0', NULL, 61, 110, '1、现场8人（含驾驶员2人），预计汛前工期至5月20日；\n2、补充借款为截止4月24日已经垫付开支，累计开支153600、累计审批借款50000；\n3、已发生费用中主要开支有：土建材料开支24700（含标志6240）、民工开支21850、租船租车开支49500（含运输、吊装、油费）、公司车辆加油开支6800、民工保险开支4150等；', NULL, '2023-04-25', 144880.00, 144880.00, '情况属实，建议借款。', 61, '“补充借款”实为现场已开支未支付款。\n情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-25', '2023-04-26', '2023-05-01', NULL, NULL, '2023-05-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418861470938', '1648881410694184962', '0', NULL, 32, 107, '按进出场4天，工作5天计划，进场人员3人（含司机），计划3月23号进场，实际工期可能受现场天气影响。', NULL, '2023-03-22', 7910.00, 7910.00, '同意', 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-22', '2023-03-27', '2023-03-27', NULL, NULL, '2023-03-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418861480939', '1648881411122003970', '0', NULL, 32, 107, '人员4人（含司机）。按进出场2天，航飞数据采集2天，其他外业（控制、调绘）按7天计划。', NULL, '2023-02-13', 12900.00, 12900.00, '计划2023年2月13日进场', 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-02-13', '2023-02-13', '2023-02-15', NULL, NULL, '2023-02-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418861490940', NULL, '1', '2023年3月电信网络宽带费用', 18, 104, '转账信息：\n中国电信股份有限公司成都分公司\n成都市成华区双林北支路473号 028-84340651\n工行春熙支行营业室 4402209029005401812', NULL, '2023-04-07', 1867.20, 1867.20, '同意', 8, '同意', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-11', '2023-04-12', '2023-04-12', NULL, NULL, '2023-04-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418861500941', '1648881410643853314', '0', NULL, 71, NULL, '飞行组3人，计划8天，住宿费约200*16=3200元，用餐成本24*100=2400元，车辆加油300*8=2400元。\n项目管理1人5月7日至20日共计14天，住宿200*14=2800，用餐成本14*100=1400元。', NULL, '2023-04-25', 32200.00, 32200.00, NULL, 61, '同意', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-26', '2023-05-04', '2023-05-05', NULL, NULL, '2023-05-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418861510942', '1648881411331719170', '0', NULL, 102, 112, '二滩监测项目4月现场开支借款。', NULL, '2023-04-26', 29820.00, 29820.00, '拟同意。', 101, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-04-26', '2023-04-28', '2023-05-01', NULL, NULL, '2023-05-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418861520943', NULL, '0', NULL, NULL, 114, NULL, NULL, NULL, 96965.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418861530944', '1648881411499491364', '0', NULL, 32, 107, '理塘抽蓄与新龙抽蓄一起借款。计划4人（含司机）8月10号出发，理塘按5天计划，新龙按6天计划。', NULL, '2023-08-09', 11360.00, 10360.00, '计划先完成理塘任务后直接转场到新龙。', 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-09', '2023-08-10', '2023-08-15', NULL, NULL, '2023-08-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418861540945', '1648881411499491365', '0', NULL, 71, 110, '项目人员5人（含驾驶员），预计工期5天（含进出场），现场不通路区域测量检查点需要找当地老乡带路，预计200元1人天。采集成果为大地高需进行坐标转换费用为500元10点。', NULL, '2023-08-18', 6900.00, 6900.00, '已核，建议借款。', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-18', '2023-08-21', '2023-08-22', NULL, NULL, '2023-08-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418861550946', '1648881411499491359', '0', NULL, 71, 110, '项目测量组人员8人（含两名驾驶员），预计工期70天（含进出场4天、地形图调绘检查点测量8天，控制埋设、静态观测、水准及三角高程测量48天，水边线及断面测量10天），现场控制点埋设、水边线及断面测量请民工20人天，预计200元1人天。', NULL, '2023-08-18', 128000.00, 100000.00, '已核，建议借款。', 61, '建议借支。', 10, 2, '按需支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-18', '2023-09-04', '2023-09-05', NULL, NULL, '2023-09-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418861560947', '1648881411499491358', '0', NULL, 33, 107, '现场2个人，预计30天。', NULL, '2023-08-29', 7500.00, 5000.00, '情况属实', 33, '暂按20天外业借支，如工作延期根据实际需要增加借支。\n建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-29', '2023-08-30', '2023-09-04', NULL, NULL, '2023-09-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418861570948', NULL, '1', '接待物资（酒、用餐）', 8, 104, NULL, NULL, '2023-06-09', 30000.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418861580949', NULL, '1', '接待物资', 8, 104, NULL, NULL, '2023-06-09', 30000.00, 30000.00, '情况属实，同意办理', 8, '同意', 2, 2, '按需拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-09', '2023-06-12', '2023-06-12', NULL, NULL, '2023-06-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418861590950', NULL, '1', '大岗山项目履约保函担保费', 30, 106, '深圳市正泓融资担保有限公司	\n开户行：建设银行深圳国会大厦支行\n银行账号：44201 61850 00591 88888\n担保费1.2%一年，担保两年', NULL, '2023-06-12', 20155.00, 20155.00, NULL, 14, '同意', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-12', '2023-06-12', '2023-06-12', NULL, NULL, '2023-06-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418861600951', '1648881410631270405', '0', NULL, 101, 104, '本项目为年度监测项目，合同内含现场月度日常观测工作等，本次借款为该项目第1次借款。借款主要开支为2023年6月～2023年9月雨季阶段现场开支。', NULL, '2023-06-20', 86860.00, 76940.00, '同意。', 101, '同意', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-20', '2023-06-21', '2023-06-25', NULL, NULL, '2023-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418861610952', NULL, '1', '办公设备采购（生产部门配置电脑）', 8, 104, NULL, NULL, '2023-07-03', 45000.00, 0.00, '情况属实，涉及金额较大，建议借款办理！', 8, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-07-03', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418861620953', '1648881411499491375', '0', NULL, 61, 110, '1、因项目工作发生变更，按实际情况重新申请借款；\n2、第一项项目开支未已发生开支，其余项根据后续工作借款，参照前期标准申请；\n3、后续调绘及修补测，计划参与人员3人（含驾驶员），预计工期7天；', NULL, '2023-07-18', 8430.00, 8430.00, '情况属实，建议借款。', 61, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-18', '2023-07-20', '2023-07-21', NULL, NULL, '2023-07-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418861630954', NULL, '1', '川A0T282、川A5U91Q、川A5177U保险费用；川A5177U油费', 16, 104, NULL, NULL, '2023-07-19', 20000.00, 20000.00, '情况属实，建议办理', 8, '同意该申请。', 2, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-20', '2023-07-21', '2023-07-21', NULL, NULL, '2023-07-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418861640955', '1648881411331719170', '0', NULL, 102, 112, '桐子林和二滩监测项目7月成本支出。', NULL, '2023-07-20', 29924.00, 29924.00, '拟同意', 101, '同意', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-20', '2023-07-25', '2023-07-26', NULL, NULL, '2023-07-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418861650956', NULL, '1', '专利年费', 52, 109, ' 实用新型专利（一种卷尺）第一年年费\n开户名：国家知识产权局专利局成都代办处\n开户行：中国农业银行股份有限公司成都蜀都支行\n账  号：229201010400233120000000001', NULL, '2023-07-26', 600.00, 600.00, '情况属实。', 46, '同意。', 9, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-26', '2023-07-27', '2023-08-04', NULL, NULL, '2023-08-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418861660957', NULL, '1', '接待礼品购置', 8, 104, '情况属实，建议借款！', NULL, '2023-09-04', 15000.00, 15000.00, '情况属实，同意办理', 8, '同意。', 2, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-04', '2023-09-04', '2023-09-04', NULL, NULL, '2023-09-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418861670958', NULL, '1', '配合成都院对公司9个抽蓄电站测绘项目检查验收', 46, 109, '本次是配合检查验收工作，生活费考虑包括检查方。', NULL, '2023-09-04', 10000.00, 10000.00, '情况属实。', 46, '同意。', 9, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-04', '2023-09-05', '2023-09-05', NULL, NULL, '2023-09-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418861680959', '1648881411705012226', '0', NULL, 59, NULL, '泸县2022年度变更内容之一，邹帅民负责，组建的临时队伍8人（含邹帅民）4车分4组已于9月8日进场。预计工作7天。', NULL, '2023-09-10', 26900.00, 23000.00, '情况属实，同意借款。', 112, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-11', '2023-09-11', '2023-09-12', NULL, NULL, '2023-09-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418861690960', NULL, '1', '购买测绘资料（四川省凉山州引雅入盐综合利用项目水利工程部分可研地形地类图测绘）', 52, 109, '单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2023-06-02', 189000.00, 189000.00, '根据成都院盐源项目的需求，情况属实。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-02', '2023-06-02', '2023-06-02', NULL, NULL, '2023-06-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418861700961', NULL, '1', '购买测绘资料（岗托水电站、江油抽水蓄能电站）', 52, 109, '经营发展部联系项目部，需购买江油抽蓄项目1万地形图38幅，岗托水电站5万地形图14幅', NULL, '2023-08-23', 78000.00, 78000.00, '情况属实。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-23', '2023-08-23', '2023-08-25', NULL, NULL, '2023-08-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418861710962', '1648881410631270409', '0', NULL, 145, 111, NULL, NULL, '2023-08-28', 489280.00, 489280.00, '已审核，同意', 15, '同意借款，根据项目进展分批借支，建议财务按项目前期费用及每月开销分批次支付。', 11, 2, '按项目具体工作开展的需要拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-29', '2023-08-29', '2023-08-30', NULL, NULL, '2023-09-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418861720963', '1648881411499491353', '0', NULL, 60, 110, '预计工期30天，参与人员3人（含驾驶员）。', NULL, '2023-09-07', 19800.00, 19800.00, '情况属实，建议借款', 60, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-07', '2023-09-08', '2023-09-12', NULL, NULL, '2023-09-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418861730964', '1648881411499491384', '0', NULL, 84, 111, '老木孔排水口高程测量，预计3人4天（含驾驶员1人）', NULL, '2023-09-12', 2600.00, 2600.00, '情况属实', 84, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-12', '2023-09-12', '2023-09-20', NULL, NULL, '2023-09-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418861740965', NULL, '0', NULL, NULL, 111, '前期需要到机场协调空域，需要一部分费用。飞行人员现场3人，按照15天计划。', NULL, NULL, 15550.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418861750966', '1648881411499491352', '0', NULL, 61, 110, '1、项目参与人员2人（不含飞行组），预计工期7天（含进出场）；\n2、现场租用车辆，单价含驾驶员及油费；', NULL, '2023-09-11', 6240.00, 6240.00, '现场未安排公司车辆，需要租车开展工作，情况属实，建议借款。', 61, '严格执行公司车辆使用规定，确保交通安全。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-11', '2023-09-12', '2023-09-12', NULL, NULL, '2023-09-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418861760967', NULL, '1', '四川省白水江地形地类图测绘资料购买', 52, 109, '经营发展部联系项目部，需购买白水江1万地形图34幅。\n单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2023-09-11', 51000.00, 51000.00, '情况属实。', 46, '同意。', 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-11', '2023-09-12', '2023-09-20', NULL, NULL, '2023-09-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418861770968', NULL, '1', '新车购置税.保险.车辆加油费.', 16, 104, NULL, NULL, '2023-09-12', 20000.00, 20000.00, '情况属实 同意借款', 8, '同意', 2, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-14', '2023-09-20', '2023-09-20', NULL, NULL, '2023-09-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418861780969', '1648881411235250178', '0', NULL, 83, 111, NULL, NULL, '2023-09-14', 51100.00, 51100.00, '同意借款。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-14', '2023-09-18', '2023-09-20', NULL, NULL, '2023-09-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418861790970', '1648881410761293825', '0', NULL, 102, 112, '根据目前项工作情况，外业工作预计在9月20日前结束，预计后期成本支出需增补借款5280元。', NULL, '2023-09-14', 5280.00, 5280.00, '情况属实，拟同意', 101, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-15', '2023-09-18', '2023-09-18', NULL, NULL, '2023-09-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418861800971', '1648881410778071042', '0', NULL, 83, 111, '该借款为2023年测绘工程中心人员开展ML坝区实景三维模型制作项目外业进行像控点、检查点测量已发生的费用。由于个别像控点位置较高，聘请了当地向导带路。', NULL, '2023-09-14', 19805.00, 19805.00, '同意借款。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-14', '2023-11-09', '2023-11-13', NULL, NULL, '2023-11-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418861810972', NULL, '1', '藏东南光伏项目现场查勘', 13, 105, NULL, NULL, '2023-09-18', 70000.00, 70000.00, '已核，情况属实。', 13, '拟同意。', 13, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-18', '2023-09-18', '2023-09-18', NULL, NULL, '2023-09-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418861820973', '1648881411138781186', '0', NULL, 84, 111, '项目坐标转换费用一项\n单位名称：自然资源部大地测量数据处理中心  \n税号：121000004352305425 \n开户行：中行西安南关支行 \n银行账号：102807336260 \n行号：104791004551\n地址：陕西西安碑林区友谊东路334号 \n电话：029-87604124', NULL, '2023-05-25', 2400.00, 2400.00, '情况属实', 84, '同意。', 10, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-25', '2023-05-25', '2023-05-25', NULL, NULL, '2023-05-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418861830974', NULL, '1', '采招网会员费（两年）', 26, 105, '采招网平台两年会员费', NULL, '2023-06-06', 8500.00, 8500.00, '已核。', 13, '同意', 7, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-07', '2023-06-07', '2023-06-08', NULL, NULL, '2023-06-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418861840975', '1648881415815430146', '0', NULL, 138, 114, NULL, NULL, '2023-06-12', 104899.00, 104899.00, '同意按此金额借款。', 142, '拟同意。', 13, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-12', '2023-06-12', '2023-06-15', NULL, NULL, '2023-06-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418861850976', '1648881412422238210', '0', NULL, 61, 110, NULL, NULL, '2023-06-13', 7000.00, 7000.00, '情况属实，建议借款。', 61, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-13', '2023-06-14', '2023-06-15', NULL, NULL, '2023-06-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418861860977', NULL, '1', '猴子岩水电站外部变形监测工程 合同延期阶段竣工审计前 部分合同工程款结算税金缴纳及其他费用', 101, 104, '本次借款为 猴子岩水电站外部变形监测工程 在竣工结算审计工作前向甲方申请提交支付部分合同款项费用，目前竣工结算剩余未结算金额为5693351.30元，经与甲方友好沟通并达成一致意见提前支付2729039.10元。该金额按照3.5%在当地税务局缴纳增值税，其他费用为本项目需、实施过程中需产生的其他成本支出。', NULL, '2023-06-21', 196000.00, 196000.00, '请领导审批', 101, '情况属实，同意', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-21', '2023-06-21', '2023-06-25', NULL, NULL, '2023-06-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418861870978', '1648881411499491374', '0', NULL, 61, 110, '1、计划参与人员4人（含驾驶员），预计工期7天；\n2、测区交通困难，需要民工搬运土建材料及仪器设备，预计民工2人，工期4天；', NULL, '2023-06-21', 8080.00, 8080.00, '情况属实，建议借款！', 61, '建议借支。', 10, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-26', '2023-06-27', '2023-06-28', NULL, NULL, '2023-07-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418861880979', NULL, '1', '简阳市东溪街道星光社区砂石资源储量服务中标服务费', 25, 105, '账户名：四川乾新招投标代理有限公司\n开户行：招商银行成都分行天府大道支行\n银行账号：1289 0768 1810 101                                  注：支付请备注：QXZB-2023-0546S+中标服务费', NULL, '2023-06-29', 3345.00, 3345.00, '情况属实。', 20, '同意', 7, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-29', '2023-06-30', '2023-07-03', NULL, NULL, '2023-07-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418861890980', '1648881410761293825', '0', NULL, 102, 112, '本期申请借款为盐源县测量标志普查维护工作观测工作成本预算。', NULL, '2023-07-31', 68400.00, 44200.00, '拟同意', 101, '暂按4人30天的工期借款', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-01', '2023-08-07', '2023-08-09', NULL, NULL, '2023-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418861900981', '1648881410631270407', '0', NULL, 101, 112, '本次借款为为八月份现场工作开展，实际必要支出。外包劳务成本为现场招聘具备电工、焊工、登高工种等人员聘用，对监测自动化设备进行线路整理和重新安装等工作。', NULL, '2023-08-18', 50000.00, 50000.00, '情况属实。', 101, '同意', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-18', '2023-08-21', '2023-08-22', NULL, NULL, '2023-08-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418861910982', NULL, '1', '重庆栗子湾抽水蓄能电站施工测量控制网复测服务', 25, 105, '保证金保险保费', NULL, '2023-08-22', 393.75, 393.75, NULL, 21, '同意', 7, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-22', '2023-08-22', '2023-08-22', NULL, NULL, '2023-08-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418861920983', '1648881412040556545', '0', NULL, 81, NULL, '45个人耗时30天，已产生费用40500元', NULL, '2023-05-27', 40500.00, 40500.00, '情况属实，建议借支。', 112, '同意借款', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-05', '2023-06-05', '2023-06-06', NULL, NULL, '2023-06-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418861930984', '1648881411235250178', '0', NULL, 83, 111, '1）该借款为我公司YX实物指标调查朗县调查组人员现场产生的住宿费用；\n2）需请财务部同志对公转账至该酒店，账号信息为：朗县凤鸣酒店有限公司，法人：李挺书，开户银行：中国农业银行朗县支行，账号为：25740001040005152；\n3）相关票据由杨振办理并及时移交财务部。', NULL, '2023-05-30', 25680.00, 25680.00, '同意。', 83, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-30', '2023-06-01', '2023-06-02', NULL, NULL, '2023-06-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418861940985', '1648881411499491377', '0', NULL, 32, 107, '现场工作内容：像控点采集，检查点采集，解译标志制作。计划30天。现场2辆车，4个人.', NULL, '2023-06-07', 45800.00, 45800.00, '一组已于6月2号出发，另一组计划6月8日出发。\n建议借支', 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-07', '2023-06-08', '2023-06-12', NULL, NULL, '2023-06-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418861950986', NULL, '1', '担保费', 30, 106, '公司名称:成都中小企业融资担保有限责任公司\n开户行：成都银行股份有限公司体育场路支行\n账号：30022010218611500012\n800*2%=16万元', NULL, '2023-06-12', 160000.00, 160000.00, NULL, 14, '同意', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-12', '2023-06-12', '2023-06-12', NULL, NULL, '2023-06-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418861960987', '1648881411331719170', '0', NULL, 102, 112, '二滩、桐子林监测项目 6月成本预算', NULL, '2023-06-20', 29924.00, 29924.00, '拟同意。', 101, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-20', '2023-06-21', '2023-06-25', NULL, NULL, '2023-07-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418861970988', NULL, '1', '资料费用', 52, 109, NULL, NULL, '2023-06-21', 21000.00, 21000.00, '情况属实。', 46, '同意。', 9, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-24', '2023-06-25', '2023-06-25', NULL, NULL, '2023-06-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418861980989', '1648881411667263489', '0', NULL, NULL, 113, '项目补勘', NULL, '2023-06-25', 5000.00, 5000.00, '已与该项目设总沟通，应要求，我部门万明计划2023年6月27日进场开展补勘工作。', NULL, '同意', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-25', '2023-06-25', '2023-06-25', NULL, NULL, '2023-07-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418861990990', '1648881415815430146', '0', NULL, 138, 114, NULL, NULL, '2023-07-06', 102600.00, 99600.00, NULL, 138, '已核，检测中心人员费用从结算中考虑，其他无异议。', 13, 2, '先按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-06', '2023-07-07', '2023-07-10', NULL, NULL, '2023-07-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418862000991', '1648881411235250178', '0', NULL, 83, 111, '1）该项目原计划6月底完成，由于甲方、业主方、地方政府等工作安排调整，按目前的工期进度至少需在8月10日左右完成；\n2）按15人*40天申请借款；，暂未申请返测机票费用；\n3）由于旅游旺季到来，米林酒店住宿费上调为260元/间。\n4）其它零星开支为资料打印、办公用品、', NULL, '2023-07-16', 170000.00, 52000.00, '同意借款。', 83, '在米林统一食宿费用建议财务直接转账支付。\n借支2万用于现场非固定用餐点生活开支。\n建议借支。', 10, 2, '按需支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-16', '2023-07-31', '2023-08-04', NULL, NULL, '2023-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418862010992', '1648881411499491368', '0', NULL, 71, 110, '预计10天，三人（杨为康、王海宾、司机）。', NULL, '2023-07-18', 9400.00, 7400.00, '情况属实，预算较合理，建议借款。', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-18', '2023-07-20', '2023-07-21', NULL, NULL, '2023-07-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418862020993', '1648881411499491381', '0', NULL, 61, 110, '本次借款主要是现场配合部分，现场参与人员3人（含驾驶员），预计工期10天；', NULL, '2023-07-18', 8400.00, 6000.00, '情况属实，建议借款。', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-18', '2023-07-25', '2023-07-26', NULL, NULL, '2023-07-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418862030994', NULL, '1', '差旅费', 21, 105, '差旅费', NULL, '2023-05-29', 20000.00, 20000.00, '已核，情况属实。', 13, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-29', '2023-05-29', '2023-05-29', NULL, NULL, '2023-05-29');
INSERT INTO `cmc_borrow` VALUES ('1648881418862040995', NULL, '1', '盐源县测量标志普查维护项目代理服务费', 24, 105, '项目名称：盐源县测量标志普查维护；\n交款方式：公对公账户银行转账（以当地银行下账时间为准）\n金  额：20000.00元（大写：贰万元整）\n收款单位：中达中正招标代理成都有限公司\n开 户 行：乐山市商业银行股份有限公司成都自贸区支行\n开户行行号：313651072056\n银行账号：020000314862\n备注栏备注：“N5134232023000056”代理服务费。', NULL, '2023-05-29', 20000.00, 20000.00, '已核，情况属实。', 13, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-29', '2023-05-29', '2023-05-31', NULL, NULL, '2023-05-31');
INSERT INTO `cmc_borrow` VALUES ('1648881418862050996', '1648881410778071042', '0', NULL, 32, 104, '后续有新增其他任务，暂时按3人30天计划。', NULL, '2023-05-30', 22500.00, 22500.00, '建议借支', 32, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-30', '2023-06-01', '2023-06-02', NULL, NULL, '2023-06-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418862060997', NULL, '1', '接待物资费用', 8, 104, NULL, NULL, '2023-06-19', 50000.00, 50000.00, '情况属实，建议办理', 8, '同意', 2, 2, '按需拨付', NULL, NULL, NULL, NULL, 14, '党建活动及优秀员工学习考察', NULL, '2023-06-19', '2023-06-20', '2023-06-20', NULL, NULL, '2023-11-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418862070998', '1648881411499491376', '0', NULL, 61, 110, '1、本次借款只预算前期飞行、像控点、检查点部分；\n2、飞行组预计工期5天，参与人员3人（含驾驶员）；地面组参与人员4人（含驾驶员），预计工期5天；', NULL, '2023-06-27', 9300.00, 9300.00, '情况属实，建议借款。', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-27', '2023-06-30', '2023-07-03', NULL, NULL, '2023-07-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418862080999', NULL, '1', '专利年费', 52, 109, '2 个发明新申请实审费、公布印刷费（1-基于已知系统的平面网建网和复建及复测稳定性评判方法、2-一种基于已知系统和高精度GNSS工程监测方法-）  一个专利年费（一种基坑及建筑的沉降监测方法第2年年费）\n开户名：国家知识产权局专利局成都代办处\n开户行：中国农业银行股份有限公司成都蜀都支行\n账  号：229201010400233120000000001', NULL, '2023-07-13', 7035.00, 7035.00, '同意。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-13', '2023-07-17', '2023-07-21', NULL, NULL, '2023-07-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418862091000', '1648881411499491371', '0', NULL, 61, 110, '本次借款为事后借款，项目外业工作已经结束，借款金额按实际开支申请。', NULL, '2023-07-18', 1977.00, 1977.00, '情况属实。', 61, '同意。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-18', '2023-07-19', '2023-07-21', NULL, NULL, '2023-07-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418862101001', NULL, '1', '购买绵竹抽水蓄能电站地形图资料', 52, 109, '经营发展部与项目部联系同意购买绵竹抽水蓄能电站地形图资料', NULL, '2023-07-25', 34500.00, 34500.00, '情况属实。', 46, '同意。', 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-25', '2023-07-26', '2023-07-26', NULL, NULL, '2023-07-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418862111002', '1648881412384489473', '0', NULL, 113, NULL, '本次借款共158004元。分别为办公室房租，每个季度8402元，2023年3月至8月未付，合计16804元；住宿成本，房租8000元每年，本次8月初到期，再续租半年，至2024年2月到期，合计4000元；耗材成本，本次打印纸需购买200件，用于成果资料打印，单价135元/件，合计27000元；车辆加油费，用于项目车辆加油，使用时间为 2023年5月至9月，申请5000元；打印，目前预计打印1000000张，打印价格0.03元/每张，合计30000元；用餐成本，单价60元/人天，2023年5月1日至8月，项目部3人，共270人天，8月初开始，项目部来啊实习生后，人数共10人，至2023年9月底，共600人天。合计870人天，共计52200元；水电成本，使用时间为2023年5月至2023年9月，预计5000元；办公设备购置，后期扫描工作需要8台双面扫描仪，项目部准备购买8台，每台1000元，合计8000元；人员成本，项目部找人协助业主管理项目，每月5000元，项目部负担2023年6月和8月的工资，合计10000元。综上所述，本次借款158004元。', NULL, '2023-07-28', 158004.00, 158004.00, '同意借款。', 112, '同意借款', 11, 2, '按需拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-03', '2023-08-04', '2023-08-09', NULL, NULL, '2023-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418862121003', NULL, '1', '江西洪屏抽水蓄能电站二期工程施工测量控制网复测服务', 25, 105, '保证金保险保费', NULL, '2023-08-22', 236.25, 236.25, NULL, 21, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-22', '2023-08-22', '2023-08-22', NULL, NULL, '2023-08-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418862131004', '1648881411499491379', '0', NULL, 61, 110, '现场人员3人（含驾驶员），暂定工期8天；', NULL, '2023-06-13', 7320.00, 7320.00, '情况属实，建议借款', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-13', '2023-06-13', '2023-06-15', NULL, NULL, '2023-06-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418862141005', '1648881412040556545', '0', NULL, 81, NULL, '车辆加油2个车一个月，生活费8个人30天、每天每人30元，林地生产费用总宗数560000宗，每宗单价先预支生产费用0.08元，都为已生产费用', NULL, '2023-08-02', 55000.00, 55000.00, '情况属实，建议借款。', 112, '同意借款', 11, 2, '按需拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-03', '2023-08-04', '2023-08-09', NULL, NULL, '2023-08-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418862151006', '1648881411331719170', '0', NULL, 102, 112, '二滩、桐子林监测8月成本支出费用。', NULL, '2023-08-21', 35368.00, 35368.00, '拟同意', 101, '同意', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-21', '2023-08-22', '2023-08-25', NULL, NULL, '2023-08-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418862161007', NULL, '1', '出差费', 46, 109, '配合成都院质量检查（电源侧、负荷侧抽蓄项目）', NULL, '2023-08-22', 15000.00, 15000.00, '情况属实。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-22', '2023-08-22', '2023-08-25', NULL, NULL, '2023-08-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418862171008', '1648881411499491381', '0', NULL, 61, 110, '1、本次为界桩测设阶段借款；\n2、现场界桩制作1人13天，现场界桩埋设及水位牌安装预计2人16天；\n3、界桩及水位牌参照预算借款；\n4、其他费用为现场防暑药品采买、千寻账号购买等；', NULL, '2023-08-22', 67130.00, 54080.00, '情况属实，建议借款', 61, '未向公司申请派车或租车。\n建议借支。', 10, 2, '按需拨付。因公司没有派车，各环节务必注意安全。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-22', '2023-08-23', '2023-08-25', NULL, NULL, '2023-08-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418862181009', NULL, '1', '邻水县自然资源确权项目 商务成本', 21, 105, '邻水县自然资源确权项目 商务成本', NULL, '2023-08-28', 47700.00, 47700.00, '已核，情况属实，合同金额为159.00万元，按3%计。', 13, '同意', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-28', '2023-08-29', '2023-08-30', NULL, NULL, '2023-08-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418862191010', '1648881411499491356', '0', NULL, 61, 110, '1、本次借款主要用于前期配合测量；\n2、现场安排作业人员2人，驾驶员1人，预计现场配合工作8天；\n3、现场吃住由地方政府统一安排，统一标准，费用自理；\n4、计划开展界桩测量踏勘工作，因植被茂密，聘请民工带路，需产生用工成本；', NULL, '2023-08-30', 5900.00, 5900.00, '情况属实，建议借款。', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-30', '2023-08-30', '2023-09-04', NULL, NULL, '2023-09-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418862201011', '1648881411499491355', '0', NULL, 61, 110, '项目工期预计8天（含进出场）；安排人员5人（含驾驶员）；', NULL, '2023-08-31', 7720.00, 7720.00, '情况属实，建议借款。', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-31', '2023-09-02', '2023-09-04', NULL, NULL, '2023-09-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418862211012', '1648881410790653953', '0', NULL, 39, 108, '业主现场指范围，还有配合工作，存在一定的不确定性。', NULL, '2023-03-10', 12000.00, 12000.00, '李总负责飞行，预计周一出发，希望抓紧审批。', 39, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-03-10', '2023-03-12', '2023-03-13', NULL, NULL, '2023-03-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418862221013', '1648881415815430146', '0', NULL, NULL, 114, NULL, NULL, NULL, 98360.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418862231014', NULL, '1', '测绘局购买资料（项目需求）', 52, 109, NULL, NULL, '2023-05-05', 18800.00, 18800.00, '情况属实。', 46, '同意。', 9, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-05', '2023-05-05', '2023-05-08', NULL, NULL, '2023-05-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418862241015', '1648881411084255234', '0', NULL, 61, 110, '项目已经结束，借款为后补借款，金额为现场实际已发生金额。', NULL, '2023-05-05', 1430.00, 1430.00, '金额已核实，建议借款。', 61, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-05', '2023-05-06', '2023-05-08', NULL, NULL, '2023-05-09');
INSERT INTO `cmc_borrow` VALUES ('1648881418862251016', '1648881410945843202', '0', NULL, 33, 107, '3人，包含进出场，预计5天。', NULL, '2023-05-06', 4500.00, 4500.00, '同意', 32, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-05-06', '2023-05-09', '2023-05-12', NULL, NULL, '2023-05-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418862261017', '1648881410778071042', '0', NULL, 32, 107, '住宿与用餐费用在酒店按月结（月底统一结算）；\n飞行组住宿2间，240元/天；用餐三人，80元/人天；\n机票为1人返程费用；\n车辆加油费为1人跟车返回路上费用。', NULL, '2023-06-26', 26100.00, 26100.00, '计划月底返回。', 32, '建议借支。', 10, 2, '按需拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-06-26', '2023-06-27', '2023-06-28', NULL, NULL, '2023-07-03');
INSERT INTO `cmc_borrow` VALUES ('1648881418862271018', '1648881410643853314', '0', NULL, 71, 110, '项目实际开支83913（含空域申请费用20000元），前期已借款63700元，本次补充借款20213元。', NULL, '2023-07-17', 20213.00, 20213.00, '情况已核，建议补充借款。', 61, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-17', '2023-07-18', '2023-07-21', NULL, NULL, '2023-07-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418862281019', NULL, '1', '大渡河公司大岗山水电站大坝及库岸边坡监测设备设施完善工程合同', 101, 112, '账号名称：中国人民人寿保险股份有限公司四川省分公司\n开 户 行：中国工商银行成都建设路支行\n账 号：4402008619000008297', NULL, '2023-07-17', 25193.00, 25193.00, '保费为合同总金额的千分之三。', 101, '情况属实', 7, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-17', '2023-07-18', '2023-07-21', NULL, NULL, '2023-07-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418862291020', NULL, '1', '普格县集体土地所有权登记成果更新汇交项目', 23, 105, '采购代理机构： 凉山共创 招标代理有限公司\n开户银行：中国工商银行股份有限公司凉山分行城南支行\n帐 号：2320 6324 0910 0058 073\n备注：普格县集体土地所有权登记成果更新汇交项目中标服务费', NULL, '2023-07-18', 22500.00, 22500.00, '已核，情况属实。', 13, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-18', '2023-07-19', '2023-07-21', NULL, NULL, '2023-07-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418862301021', NULL, '1', '接待餐饮借款', 8, 104, NULL, NULL, '2023-07-18', 10000.00, 10000.00, '情况属实，建议办理', 8, '同意。', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-18', '2023-07-19', '2023-07-19', NULL, NULL, '2023-07-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418862311022', '1648881411499491367', '0', NULL, 71, 110, NULL, NULL, '2023-07-31', 7260.00, 6300.00, '项目安排人员4人（含驾驶员），预计工期8天（含进出场）；\n金额已核，建议借款。', 61, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-31', '2023-08-03', '2023-08-04', NULL, NULL, '2023-08-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418862321023', '1648881410631270404', '0', NULL, NULL, 113, '美玉项目技术人员现场生产、交通、食宿费用', NULL, '2023-08-01', 20000.00, 20000.00, '美玉光伏项目勘察技术人员已进场，根据现场实际情况，预计工期20天。', NULL, '同意。', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-08-01', '2023-08-04', '2023-08-04', NULL, NULL, '2023-08-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418862331024', '1648881415815430146', '0', NULL, 138, 114, NULL, NULL, '2023-08-07', 93900.00, 93900.00, NULL, 138, '拟同意。', 13, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, '借款批复4万，已与项目经理协调。', NULL, '2023-08-07', '2023-08-11', '2023-08-15', NULL, NULL, '2023-08-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418862341025', '1648881410631270422', '0', NULL, 102, 112, '观音岩2023年复测项目成本支费用。', NULL, '2023-12-02', 33600.00, 30200.00, '拟同意', 101, '同意', 7, 2, '按需拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-03', '2023-12-08', '2023-12-08', NULL, NULL, '2023-12-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418862351026', '1648881411499491334', '0', NULL, 60, 110, '参与人员4人，预计工期40天（含12号地块项目和进出场）。', NULL, '2023-12-08', 40000.00, 0.00, '项目开支，建议借款。', 60, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-12-08', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418862361027', NULL, '1', '购买5位员工商业保险', 58, 104, '账户名称：中国人民人寿保险股份有限公司四川省分公司账号：4402008619000008297开户行：中国工商银行成都建设路支行', NULL, '2023-12-27', 5310.00, 5310.00, '情况属实，同意办理', 8, '同意', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-27', '2023-12-27', '2023-12-27', NULL, NULL, '2023-12-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418862371028', '1648881410631270407', '0', NULL, 101, 112, '本费用为2024年1月～2024年2月项目现场成本开支。         大岗山监测项目与甲方的第2次合同经费结算目前正在进行办理中，预计将在2024年2月份完成开票和回款，结算费用为135万。', NULL, '2024-01-19', 44300.00, 44300.00, '拟同意。', 101, NULL, 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-19', '2024-01-22', '2024-01-22', NULL, NULL, '2024-01-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418862381029', '1648881411138781188', '0', NULL, 83, 111, '1）该项目于2023年12月25日完成外业工作，根据实际开支进行借款。该项目参与人员为杨振、李磊、赵明焱、吴振、及司机次仁罗布，现在工作时间为10天。\n2）由于无人船用GNSS接收机设备故障，赵明焱乘飞机携带设备进场并参与现场工作。', NULL, '2024-01-23', 14300.00, 14300.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-01-23', '2024-02-06', '2024-02-06', NULL, NULL, '2024-02-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418862391030', '1648881411499491335', '0', NULL, 83, 111, '1）由于项目新增水下地形测量工作、测区现场交通管制、天气原因（雨、雾）造成项目增加工期，根据项目实际已开支金额申请借款；\n2）第3项费用由于墨脱县测区德兴乡吊桥车辆无法通行，需在德兴乡租赁皮卡车开展工作，其中激光技术中心租车9天，测绘工程中心开展控制测量、补测、调绘等工作，10天；\n3）第3~6项费用（金额为46100元）需请财务部同事对公转账至租车公司，名称：巴宜区八一镇锦程汽车租赁行。纳税人识别号：9254 0402 MA6T 41CC 3F 。地址、电话：林芝市巴宜区八一镇加丁嘎路退休区38号  17789049735 。开户行及账号：中国工商银行林芝支行 0158 0002 0910 0023 334。', NULL, '2024-01-23', 145859.10, 145859.10, '同意借款。第3~6项租车的费用（合计金额为46100元）需请财务部同事公对公转账至租车公司，名称：巴宜区八一镇锦程汽车租赁行。纳税人识别号：9254 0402 MA6T 41CC 3F 。地址、电话：林芝市巴宜区八一镇加丁嘎路退休区38号  17789049735 。开户行及账号：中国工商银行林芝支行 0158 0002 0910 0023 334。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-01-26', '2024-03-05', '2024-03-11', NULL, NULL, '2024-03-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418862401031', '1648881410631270417', '0', NULL, 112, NULL, '数据采集组3人，计划10天工期；外业组3人，计划15天工期；现场交通条件较差，工作面广，单边按500公里计，2台车，现场每2天需加一次汽油，普拉多500元/次，长城炮400元/次，油费合计约7500元；食宿费用标准根据前期踏勘掌握的信息拟定。', NULL, '2023-10-21', 26750.00, 20000.00, '情况属实。', 112, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-21', '2023-10-23', '2023-10-27', NULL, NULL, '2023-10-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418862411032', NULL, '1', '阿坝红原阿木柯35kV输变电工程等两个工程土地报件咨询服务', 25, 105, '缴费信息详见附件', NULL, '2023-10-23', 4650.00, 4650.00, '已核', 13, '同意', 7, 2, '合作项目，该费用由合作方承担，可以先行支付，须及时冲抵。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-23', '2023-10-23', '2023-10-27', NULL, NULL, '2023-10-31');
INSERT INTO `cmc_borrow` VALUES ('1648881418862421033', '1648881410778071042', '0', NULL, 32, NULL, '飞行组2人，按7天计划，其他成本为空域申请及协调费用', NULL, '2023-10-28', 16300.00, 16300.00, '飞行组于10月29日进场', 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-28', '2023-10-30', '2023-11-03', NULL, NULL, '2023-11-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418862431034', '1648881411499491342', '0', NULL, 84, 111, '测区分昭觉县和宁南县两块。飞行组3人含驾驶员1人，预计工期10天含进出场及转场，共计30人天。外业组5人含驾驶员1人，预计工期16天含进出场及转场，共计80人天。总计110人天。', NULL, '2023-11-02', 28000.00, 14140.00, NULL, 84, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-02', '2023-11-03', '2023-11-03', NULL, NULL, '2023-11-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418862441035', '1648881411499491342', '0', NULL, 84, 111, '宁南风电项目预计外业4人7天共计28人天（含昭觉风电转场1天，出场1天），项目费用明细见附件', NULL, '2023-11-17', 7900.00, 7900.00, NULL, 84, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-17', '2023-11-24', '2023-11-30', NULL, NULL, '2023-12-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418862451036', '1648881411499491335', '0', NULL, 83, 111, '1）本项目测绘工程中心外业投入6人（杨振、杨晶、廖绍毅、张杰、张韦、廖友福），司机1人（次仁罗布），预计现场工作40天。激光技术中心投入4人，司机2人（陈建贤、熊艳华），预计现场工作30天；\n2）测绘工程中心租赁丰田普拉多一辆，单价为900/天，因德兴大桥维修，需要在河对面另租赁车辆开展工作，共计需要50天。；激光技术部租赁三菱帕杰罗一辆，因德兴大桥维修，需要在河对面租赁车辆开展工作，共计需要45天；\n3）需进入林区内测量检查点，预计需要4名民工，现场工作20日。（购买民工保险至少需要5人，为司机次仁波罗购买保险一份）', NULL, '2023-12-04', 262250.00, 210900.00, '同意借款。', 83, '按申请说明的“数据采集30天”、“外业40天”预算借支。\n按实际开支分批支付。', 10, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-04', '2023-12-06', '2023-12-06', NULL, NULL, '2023-12-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418862461037', NULL, '1', '莎车县村庄规划地形图测绘采购项目（第一包）代理服务费', 25, 105, '收款人：新疆西部疆南招标代理有限公司\n开户银行：中国建设银行股份有限公司莎车支行               账    号：65050174638600001283\n付款备注：莎车县村庄规划地形图测绘采购项目（第一包）代理服务费', NULL, '2023-12-18', 10035.00, 10035.00, '已核，建议借支。', 20, '同意', 7, 2, '同意支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-18', '2023-12-19', '2023-12-21', NULL, NULL, '2023-12-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418862471038', '1648881410631270423', '0', NULL, 71, 110, '项目生产（控制测量计划3天，检查点、调绘计划3天，进出场各1天）共计4人8天，合计32人.天。', NULL, '2023-12-27', 7320.00, 7320.00, '建议借款。', 61, '同意借款', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-27', '2024-01-02', '2024-01-08', NULL, NULL, '2024-01-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418862481039', NULL, '1', '购买新员工唐伟1人商业保险费用', 58, 104, '请转账：账户名称：中国人民人寿保险股份有限公司四川省分公司账号：4402008619000008297开户行：中国工商银行成都建设路支行', NULL, '2024-01-17', 1062.00, 1062.00, '情况属实，建议借款！', 8, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-17', '2024-01-17', '2024-01-17', NULL, NULL, '2024-01-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418862491040', '1648881411235250178', '0', NULL, 83, 111, '1）以上明细为2023年02月~08月开展现场工作时由米林市财政局提供后勤保障统一安排的食宿、交通用车等部分费用。该费用已与成都院相关负责人进行了校核；\n2）请财务部同事按附件“2023C05ML及JW水电工程建设征地实物指标调查配合测量项目-米林市政府统一安排涉及费用清单.xlsx”中所列的各企业银行卡账号转账支付。', NULL, '2023-10-07', 750556.00, 750556.00, '同意借款。', 83, '情况属实，建议借支。', 10, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-10-07', '2023-11-24', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418862501041', '1648881411499491347', '0', NULL, 84, 111, '1.飞行组4人（含华测1人），其中3人6天，1人4天。合计22人天。\n2.外业组计划4人（含驾驶员1人），预计外业工期9天，合计36人天。', NULL, '2023-10-11', 14600.00, 8960.00, NULL, 84, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-11', '2023-10-13', '2023-10-19', NULL, NULL, '2023-10-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418862511042', '1648881411499491354', '0', NULL, 84, 111, '外业4人含驾驶员1人，项目开支细节见附件', NULL, '2023-10-16', 3936.00, 3936.00, NULL, 84, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-16', '2023-10-17', '2023-10-19', NULL, NULL, '2023-10-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418862521043', '1648881411499491349', '0', NULL, 83, 111, '该项目撤场前已与甲方明确无其它工作后才决定返回。但在人员返程路上，甲方临时通知地方政府要求进行配合测量，蒋剑虹与董旭鹏2人于11月2日在重庆下车，翌日乘动车返回测区开展配合测量工作，于11月7日完成新增配合测量工作乘动车返回成都。交通费用为乘坐动车及小额交通费用。', NULL, '2023-11-08', 4360.00, 4360.00, '同意借款。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-08', '2023-11-09', '2023-11-13', NULL, NULL, '2023-11-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418862531044', '1648881411499491340', '0', NULL, 83, 111, '该项目投入作业员3人（杨晶、徐志勇、张杰）司机（1人），租用丰田普拉多一辆。现场工作7日。', NULL, '2023-11-14', 15870.00, 15170.00, '同意借款。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-14', '2023-11-16', '2023-11-17', NULL, NULL, '2023-11-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418862541045', NULL, '1', '川A1950R  川A6692U  川A99L3B车辆保险费', 16, 104, NULL, NULL, '2023-12-04', 10000.00, 10000.00, '同意', 8, '同意', 2, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-06', '2023-12-06', '2023-12-06', NULL, NULL, '2023-12-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418862551046', '1648881411499491343', '0', NULL, 71, 110, '项目工作开展用工85人/天，实际产生费用21673.00元（卫通村住宿250一个标间，餐费人均约100元/天），项目已借款12800元，现申请补借款8873元。', NULL, '2023-12-13', 8873.00, 8873.00, '已核，按实际开支补充借款，建议借款。', 61, '建议增补借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-13', '2023-12-14', '2023-12-17', NULL, NULL, '2023-12-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418862561047', NULL, '1', '四川大渡河双江口水电站枢纽工程施工测量控制网复测续开履约保证金', 30, 104, '履约保证金', NULL, '2023-12-19', 17579.30, 17579.30, NULL, 14, '同意', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-19', '2023-12-21', '2023-12-21', NULL, NULL, '2023-12-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418862571048', '1648881411331719170', '0', NULL, 102, 112, '二滩、桐子 林监测12月成本支出，增加二滩年度基准网观测民工费用18840元。', NULL, '2023-12-24', 49848.00, 49848.00, '拟同意。', 101, '同意', 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-25', '2023-12-25', '2023-12-27', NULL, NULL, '2024-01-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418862581049', NULL, '1', '大邑县农村乱占耕地建房问题整治技术服务代理服务费', 25, 105, '收款单位：四川易通天和招标代理有限公司成都金牛区分公司              转账备注：项目名称+代理服务费\n开户银行：浙江民泰商业银行股份有限公司成都高新支行\n账    号：5847 3447 1700 015\n联系电话： 028-85320556\n联系人： 李先生', NULL, '2024-01-17', 20576.00, 20576.00, '已核，情况属实。', 13, '同意', 7, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-17', '2024-01-17', '2024-01-17', NULL, NULL, '2024-01-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418862591050', NULL, '1', '测绘局购买资料（大渡河水风光一体化1万地形图29幅、成都区域1万地形图5幅）', 52, 109, '经营发展部联系项目部，需购买大渡河水风光一体化1万地形图29幅、成都区域1万地形图5幅。\n单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2024-01-17', 51000.00, 51000.00, '情况属实。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-17', '2024-01-17', '2024-01-17', NULL, NULL, '2024-01-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418862601051', NULL, '1', '业务支出', 14, 106, NULL, NULL, '2023-10-10', 150000.00, 150000.00, NULL, 14, '可以支付。', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-10', '2023-10-10', '2023-10-10', NULL, NULL, '2023-10-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418862611052', NULL, '1', '川AEX607保险费、川A5177U燃油费、接待费用.', 16, 104, NULL, NULL, '2023-10-15', 20000.00, 20000.00, '同意', 8, '同意', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-16', '2023-10-19', '2023-10-19', NULL, NULL, '2023-10-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418862621053', '1648881411331719170', '0', NULL, 102, 112, '二滩和桐子林监测项目10月成本费用支出，增加桐子林年度基准网复测民工费用。', NULL, '2023-10-20', 38684.00, 38684.00, '拟同意。', 101, '同意', 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-20', '2023-10-20', '2023-10-27', NULL, NULL, '2023-11-01');
INSERT INTO `cmc_borrow` VALUES ('1648881418862631054', '1648881411499491346', '0', NULL, 83, 111, '1）该项目激光技术中心计划投入2人、1车1司机，预计现场工作6天；\n2）该项目测绘工程中心计划投入2人，1车1司机，预计现场工作5天；\n3）因重点区域植被茂密，需聘期民工带路及砍树，预计需要2人*2天；\n4）第6项为为采购蛇药、劳保防护用品等。', NULL, '2023-10-24', 23140.00, 17600.00, '同意借款。', 83, '建议飞行、常规外业同步进行。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-24', '2023-10-26', '2023-10-27', NULL, NULL, '2023-11-01');
INSERT INTO `cmc_borrow` VALUES ('1648881418862641055', NULL, '1', '琼结县第三次全国土壤普查服务采购项目中标服务费', 23, 105, '账号信息详见附件\n备注：琼结县第三次全国土壤普查服务采购项目中标服务费', NULL, '2023-11-14', 25500.00, 25500.00, '已核，建议借款。', 20, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-14', '2023-11-14', '2023-11-14', NULL, NULL, '2023-11-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418862651056', '1648881411499491351', '0', NULL, 84, 111, '本项目11月10号-11号水下地形测量进出场共2天，3人（赵洪、向艳雄、陈建贤）。', NULL, '2023-11-20', 1100.00, 0.00, '已核实为实际产生项目费用', 84, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-11-20', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418862661057', '1648881411499491339', '0', NULL, 61, 110, '1、项目预计投入人员4人（含驾驶员）；\n2、项目预计工期18天（含进出场）；\n3、飞行组于11月15日-11月21日进场开展飞行作业（含设备公司人员3人）成本，按实际金额申请借款；', NULL, '2023-11-27', 19006.00, 16846.00, '建议借款。', 61, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-27', '2023-11-28', '2023-11-30', NULL, NULL, '2023-12-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418862671058', '1648881412040556545', '0', NULL, 81, NULL, '车辆费用10月份5000，生活费8个人*30天*50元，人工费用已经完成，单价1.2，557810宗，按照15%先支付费用。', NULL, '2023-12-01', 117405.80, 117400.00, '情况属实，同意借款。', 112, '同意借款', 11, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-01', '2023-12-06', '2023-12-08', NULL, NULL, '2023-12-21');
INSERT INTO `cmc_borrow` VALUES ('1648881418862681059', NULL, '1', '购买测绘资料（红原抽水蓄能电站补充范围）', 52, 109, '经营发展部联系项目部，需补充购买红原1万地形图16幅。\n单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2023-12-01', 24000.00, 24000.00, '情况属实。', 46, '同意。', 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-01', '2023-12-04', '2023-12-06', NULL, NULL, '2023-12-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418862691060', '1648881411499491334', '0', NULL, 60, 110, NULL, NULL, '2023-12-06', 24000.00, 0.00, '项目开支，建议借款。', 60, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-12-06', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418862701061', '1648881411499491372', '0', NULL, 33, 107, '4人，计划7天（包含进出场）', NULL, '2024-01-03', 5460.00, 4960.00, '同意', 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-03', '2024-01-04', '2024-01-08', NULL, NULL, '2024-01-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418862711062', '1648881410631270428', '0', NULL, 32, 107, '按10天计划', NULL, '2024-01-18', 15800.00, 10600.00, '外业人员已出发', 32, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-18', '2024-01-19', '2024-01-22', NULL, NULL, '2024-01-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418862721063', '1648881412040556545', '0', NULL, 81, NULL, '车辆加油2个车3个月，\n用餐成本：生活费6个人；每人每天50元；一天300元；一共5个月，\n用工成本：5个人 ；项目每个月人工21500，5个月费用生产费用。', NULL, '2024-01-22', 158500.00, 158500.00, '生活费、人员工资支付时间段为2023.9-2024.1，同意借款。', 112, '同意', 11, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-25', '2024-01-25', '2024-01-30', NULL, NULL, '2024-02-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418862731064', '1648881411499491351', '0', NULL, 84, 111, '飞行组3人含驾驶员1人，外业组4人含驾驶员1人。飞行预计1天，外业工作预计3天。另进出场2天。', NULL, '2023-09-20', 7000.00, 5000.00, NULL, 84, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-20', '2023-09-23', '2023-09-26', NULL, NULL, '2023-09-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418862741065', NULL, '1', '购买公司员工2023年10月1日至2024年9月30日商业保险费用（转账）', 58, 104, '账号名称：中国人民人寿保险股份有限公司四川省分公司\n开 户 行：中国工商银行成都建设路支行\n账    号：4402008619000008297', NULL, '2023-09-25', 174680.00, 174680.00, '情况属实，同意办理', 8, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-25', '2023-09-26', '2023-09-26', NULL, NULL, '2023-09-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418862751066', '1648881410631270407', '0', NULL, 101, 112, '大岗山水电站监测设施改造项目于2023年6月30日进场，目前在租用当地楼栋作为项目部日常办公及生活营地，前期工作正在开展中，本次借款为项目部前期建立需发生项目成本（计划前2个月左右的开支），后续根据实施进度计划进行后续借支。', NULL, '2023-07-03', 74000.00, 74000.00, '请审核。', 101, '同意', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-05', '2023-07-07', '2023-07-07', NULL, NULL, '2023-08-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418862761067', NULL, '1', '2023年度三体系审核', 52, 109, '汇款方式如下：\n收款单位：北京中大华远认证中心有限公司四川分公司\n开户银行：中信银行股份有限公司成都武侯支行\n账 号：7413310182600013961', NULL, '2023-07-17', 21000.00, 21000.00, '情况属实。', 46, '同意。（含扩大审核费用7000元）', 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-18', '2023-07-19', '2023-07-21', NULL, NULL, '2023-07-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418862771068', NULL, '1', '大渡河公司大岗山水电站大坝及库岸边坡监测设备设施完善工程合同', 101, 112, '账户名称：安诚财产保险股份有限公司四川分公司\n银行账号：5100141608059227040\n开户行：建行成都第一支行', NULL, '2023-07-17', 20993.00, 20993.00, '保费为合同总金额的千分之二点五。', 101, '情况属实', 7, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-17', '2023-07-18', '2023-07-21', NULL, NULL, '2023-07-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418862781069', '1648881411499491369', '0', NULL, 61, 110, '该借款为事后借款，外业工作已经结束，按实际开支申请。', NULL, '2023-07-18', 2069.00, 2069.00, '情况属实。', 61, '同意。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-18', '2023-07-19', '2023-07-21', NULL, NULL, '2023-07-24');
INSERT INTO `cmc_borrow` VALUES ('1648881418862791070', NULL, '1', '投标专用', 23, 105, NULL, NULL, '2023-07-18', 20000.00, 20000.00, '已核，建议借支。', 13, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-07-25', '2023-07-25', '2023-07-26', NULL, NULL, '2023-07-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418862801071', '1648881411331719170', '0', NULL, 102, 112, '二滩、桐子林9月生产成本支出，增加年度基准网点观测便道维护。', NULL, '2023-09-19', 47924.00, 47924.00, '拟同意。', 101, '同意', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-19', '2023-09-20', '2023-09-26', NULL, NULL, '2023-09-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418862811072', '1648881410631270407', '0', NULL, 101, 104, '本次借款为10月份现场工作开展生产成本，因10月份涉及到多项工作面开展（例如一体化测斜仪土建工作、双层棱镜保护罩的搬运及安装工作等，需较多的民工投入。包括后期设备的提前准备，逐步开展。', NULL, '2023-10-06', 82100.00, 82100.00, '情况属实。', 101, '同意', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-06', '2023-10-08', '2023-10-10', NULL, NULL, '2023-10-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418862821073', '1648881411499491348', '0', NULL, 32, 107, '按4人11天计划，进出场4天，工作7天', NULL, '2023-10-07', 11420.00, 9540.00, '外业已于10月6号出发', 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-07', '2023-10-08', '2023-10-10', NULL, NULL, '2023-10-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418862831074', '1648881411499491365', '0', NULL, 71, 110, '新增断面测量，项目人员4人（含驾驶员），实际完成工期8天。', NULL, '2023-10-12', 6520.00, 6520.00, '断面按高程控制，高差大。\n情况属实，建议借款。', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-13', '2023-11-02', '2023-11-03', NULL, NULL, '2023-11-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418862841075', NULL, '1', '业务费用', 14, 104, NULL, NULL, '2023-10-19', 100000.00, 100000.00, NULL, 14, '同意', 2, 2, '可以拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-19', '2023-10-19', '2023-10-19', NULL, NULL, '2023-10-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418862851076', '1648881411499491359', '0', NULL, 71, 110, '前期借款已用完（截止2023年10月23日，项目共443个工天（含飞行组），完成126个控制点埋设、观测，全部航飞任务、三角高程测量任务约270km，地形图调绘32km&sup2;，水准测量总计285km，还剩余工作有调绘155km&sup2;、水准约180km，断面22条，同时水面线44公里河道、补充像控点等工作），现补充借款，空域办理费用20000元，水准民工预计40天，每天两人共计80人/天，每人每天250元，共计20000元（已用50个工，前期费用未支付），后续生产预计25天，现场7人共计约175人/天。', NULL, '2023-10-24', 66000.00, 66000.00, '情况属实，建议借款。', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-24', '2023-10-31', '2023-11-03', NULL, NULL, '2023-11-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418862861077', NULL, '1', '盐源抽蓄地形图资料购买', 52, 109, '经营发展部联系项目部，需购买盐源1万地形图3幅。\n单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2023-10-24', 4500.00, 4500.00, '情况属实，同意申请。', 46, '同意。', 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-24', '2023-10-24', '2023-10-27', NULL, NULL, '2023-11-01');
INSERT INTO `cmc_borrow` VALUES ('1648881418862871078', '1648881410631270419', '0', NULL, 80, NULL, '1.本项目暂按一个月工期借款，项目前期计划入技术人员2人（邹帅民1人、临时技术领队1人），总人天为2*30=60。\n2.由于琼结县较小住宿餐食单一，住宿及生活餐食成本略高；\n3.采样工具已采购4套；\n4.其他零星支出为现场开展工作时与多方协调关系时产生的费用、油费、部分办公用品采购；\n5.工作对接及工作样区踏勘取样工作时需要使用车辆。', NULL, '2023-11-15', 48000.00, 45000.00, '同意借款。应做好安全生产保障工作，合理控制成本费用，专款专用。建议了解、对比房屋租赁成本和可行性。', 112, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-17', '2023-11-21', '2023-11-24', NULL, NULL, '2023-11-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418862881079', '1648881411067478017', '0', NULL, 61, 110, '1、根据目前联系的情况安排部分工作；\n2、预计投入人员4人（含驾驶员），先按45天工期申请借款；\n3、后期根据实际工作安排，再补充借款；', NULL, '2023-11-17', 37800.00, 33300.00, '情况属实，建议借款。', 61, '建议借支。', 10, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-17', '2023-11-24', '2023-11-30', NULL, NULL, '2023-12-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418862891080', '1648881412040556545', '0', NULL, 81, NULL, '5个人每天费用50元一个月合计7500，租车一个月6000，5个人每个月4000一共2个月合计40000，已生产费用。', NULL, '2023-09-18', 56500.00, 56500.00, '情况属实，同意借款。', 112, '同意借款', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-19', '2023-09-21', '2023-09-26', NULL, NULL, '2023-09-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418862901081', '1648881411499491354', '0', NULL, 84, 111, '测绘工程中心3人，租车司机1人，进出场2天，预计现场工作日15天。共计68人天', NULL, '2023-09-19', 18960.00, 13480.00, '情况属实', 84, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-19', '2023-09-23', '2023-09-26', NULL, NULL, '2023-09-27');
INSERT INTO `cmc_borrow` VALUES ('1648881418862911082', '1648881411499491343', '0', NULL, 71, 110, '进场1天，撤场2天，现场项目生产预计7天，共计70人天。车辆加油预计约3000元（两辆车各1500元）。', NULL, '2023-11-03', 12800.00, 12800.00, '已核，建议借款。', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-07', '2023-11-08', '2023-11-13', NULL, NULL, '2023-11-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418862921083', NULL, '1', '购买测绘资料（红原抽水蓄能电站）', 52, 109, '经营发展部联系项目部，需购买红原1万地形图6幅。\n单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2023-11-07', 9000.00, 9000.00, '情况属实，同意申请。', 46, '同意。', 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-07', '2023-11-07', '2023-11-13', NULL, NULL, '2023-11-13');
INSERT INTO `cmc_borrow` VALUES ('1648881418862931084', '1648881412384489473', '0', NULL, 113, NULL, '本次借款156994元。分项说明如下：用餐成本：项目部计划人员12人左右，从本月20日开始至2024年1月31日，其中九月底至11月20日，共计两人50天，11月20日至1月31日为12日，共计72天，合计964人/天，共计费用57840元；房租费用为办公室租赁，共两个季度，其中包含租金6722元/每季度，物业1680元/每季度，合计金额16804元；打印费用，本区间打印预计1200000张，每张0.03元，合计金额36000元；耗材费用，后续A4纸张需50件左右，每件135元，合计6750元，水电费用：主要包含打印电费，从 9月至今，打印电费平均为2000元/月，合计金额10000元；住宿成本，实习生人数为10人，预计床上用品320元/人，共计3200元；资料费用：项目公示图纸打印，每张26元，预计打印400张，合计金额10400元；其他成本主要为监理检查的花费，预计16000元。综上所述，本次借款金额为156994元', NULL, '2023-11-13', 156994.00, 149154.00, '同意借支。借款金额较大，应合理控制成本；后期生产过程中，做好安全生产保障工作，先培训再上岗。', 112, '同意借款，财务根据情况分批次支付', 11, 2, '同意上述意见。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-15', '2023-11-15', '2023-11-15', NULL, NULL, '2023-11-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418862941085', NULL, '1', '青海公司玛尔挡水电站库区水温观测服务公开招标中标服务费', 24, 105, '青海公司玛尔挡水电站库区水温观测服务公开招标（项目名称）CEZB230408983（招标编号）已中标，中标金额为289.85万元。根据招标文件及中标服务费通知单要求，本项目需要缴纳的中标服务费是中标金额的1%，即：28985.00元（大写：贰万捌仟玖佰捌拾伍元整）。', NULL, '2023-11-13', 28985.00, 28985.00, '已核，情况属实。', 13, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-13', '2023-11-14', '2023-11-14', NULL, NULL, '2023-11-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418862951086', '1648881411331719170', '0', NULL, 102, 112, '2023年11月二滩、桐子林监测成本支出费用。', NULL, '2023-11-21', 38364.00, 38364.00, '拟同意。', 101, '同意', 7, 2, '按需拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-22', '2023-11-27', '2023-11-30', NULL, NULL, '2023-12-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418862961087', NULL, '1', '主题党日活动经费申请', 8, 104, NULL, NULL, '2023-11-27', 50000.00, 0.00, '情况属实，建议借款', 8, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2023-11-27', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418862971088', '1648881410631270405', '0', NULL, 101, 112, '本项目为年度监测项目，合同内含现场月度日常观测工作等，本次借款为该项目第2次借款。借款主要开支为2023年08月～2023年12月阶段现场开支。', NULL, '2023-12-03', 39910.00, 39910.00, '根据现场负责人实际开支需要测算借款额。', 101, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-03', '2023-12-08', '2023-12-08', NULL, NULL, '2023-12-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418862981089', NULL, '1', '都江堰慰问退休职工开支', 58, 104, NULL, NULL, '2023-09-19', 15000.00, 15000.00, '同意', 8, '同意', 2, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-19', '2023-09-20', '2023-09-20', NULL, NULL, '2023-09-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418862991090', '1648881411499491349', '0', NULL, 83, 111, '1，该项目外业参与人员有杨振、杨晶、蒋剑虹、谭天宇、赵永来，预计现场工作14日；\n2，考虑到国庆长假期间食宿费用可能较高，故均按100/天预算；\n3，加油费按进出场共3000元、现场用车2000元预估。', NULL, '2023-09-27', 19400.00, 16600.00, '同意借款。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-27', '2023-09-27', '2023-09-28', NULL, NULL, '2023-10-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418863001091', '1648881411499491348', '0', NULL, 32, 107, '外业人员于10月19号返回成都，借款按现场实际开销', NULL, '2023-10-19', 3824.00, 3824.00, '按现场实际开销增加此借款', 32, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-19', '2023-10-27', '2023-11-03', NULL, NULL, '2023-11-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418863011092', '1648881411235250178', '0', NULL, 83, 111, '该费用为本项目2月~9月各组在村上的餐馆及老百姓家中用餐的费用，该费用计划于10月29日在米林县财政局现金支付给相关方，并完善领款手续。该费用已与经营发展部李胜才进行了沟通和确认。该费用相关票据由米林县财政局统一处理。', NULL, '2023-10-25', 39282.00, 39282.00, '同意借款。', 83, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-25', '2023-10-26', '2023-10-27', NULL, NULL, '2023-11-01');
INSERT INTO `cmc_borrow` VALUES ('1648881418863021093', NULL, '1', '中行贷款担保费', 30, 104, '中小担保费账户\n公司名称:成都中小企业融资担保有限责任公司\n纳税人识别号:91510100716016219G\n地址:四川省成都市青羊区顺城大街269号富力中心15、16楼\n开户行：成都银行股份有限公司体育场路支行\n账号：30022010218611500012', NULL, '2023-11-14', 100000.00, 100000.00, NULL, 14, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-14', '2023-11-16', '2023-11-16', NULL, NULL, '2023-11-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418863031094', NULL, '1', '玛尔挡担保费', 30, 104, NULL, NULL, '2023-11-23', 32000.00, 32000.00, NULL, 14, '同意', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-23', '2023-11-24', '2023-11-24', NULL, NULL, '2023-11-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418863041095', NULL, '1', '昭化林权保函费用', 30, 104, NULL, NULL, '2023-11-23', 10000.00, 10000.00, NULL, 14, '同意。', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-23', '2023-11-24', '2023-11-24', NULL, NULL, '2023-11-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418863051096', '1648881411499491333', '0', NULL, 60, 110, '数据采集按照3人20天计划（含进出场），其他成本是空域申请及协调费用。\n外业调绘按照4人40天计划（含进出场）。\n12号地块与8号人员一致，一起借款。', NULL, '2023-12-07', 97200.00, 74800.00, '项目开支，建议借款。', 60, '2、3号场址，8号场址，12号场址三个项目，外业人员一致，统一在此项目借支。\n建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-07', '2023-12-11', '2023-12-14', NULL, NULL, '2023-12-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418863061097', '1648881410631270418', '0', NULL, 102, 112, '桐子林测斜孔恢复成本支出，截止12月20日已开支20118元。', NULL, '2023-12-20', 23000.00, 23000.00, '拟同意', 101, '同意', 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-20', '2023-12-21', '2024-01-08', NULL, NULL, '2024-01-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418863071098', '1648881410643853314', '0', NULL, 61, 110, '1、10月份进场，发生成本27016,（含坐标转换费12000），实际借款21800；\n2、12月份进场，发生成本5751；', NULL, '2023-12-27', 10967.00, 10976.00, '已核，情况属实，建议补充借款。', 61, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-04', '2024-01-04', '2024-01-08', NULL, NULL, '2024-01-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418863081099', NULL, '1', '大唐电子商务平台交易使用费', 24, 105, '大唐观音岩水电开发有限公司变形监测控制网复测及坝前淤积和坝后冲刷测量项目（项目名称），中标价为：578100.00元。根据询价采购文件、大唐电子商务平台管理要求，本项目需要缴纳电子商务平台交易费：\n（1）电子商务平台交易费收费比率：成交金额的1.8%；\n（2）缴纳金额：10405.80元（大写：壹万零肆佰零伍元捌角）；\n（3）缴纳方式：大唐电子商务平台网银对公支付。', NULL, '2024-01-11', 10405.80, 10405.80, '已核，无异议。', 13, '同意', 7, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-12', '2024-01-12', '2024-01-15', NULL, NULL, '2024-01-15');
INSERT INTO `cmc_borrow` VALUES ('1648881418863091100', '1648881410631270424', '0', NULL, 33, 107, '现场4人（吴振、唐伟、罗毅、熊艳华），现场进行激光数据采集、像控点采集、检查点采集，时间3天（包含进出场，2021.01.06-2024.01.08）', NULL, '2024-01-16', 1071.00, 1071.00, NULL, 32, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-16', '2024-01-16', '2024-01-17', NULL, NULL, '2024-01-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418863101101', '1648881410631270452', '0', NULL, 60, 110, '飞行组3人14天，地面组4人15天，含进出场。', NULL, '2024-01-17', 28400.00, 25340.00, '项目开支，建议借款。', 60, '同意借款', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-17', '2024-01-17', '2024-01-17', NULL, NULL, '2024-01-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418863111102', NULL, '1', '公司办公物资及接待费用借款', 8, 104, NULL, NULL, '2023-10-16', 20000.00, 20000.00, '情况属实，同意办理', 8, '同意', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-16', '2023-10-17', '2023-10-17', NULL, NULL, '2023-10-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418863121103', '1648881411499491349', '0', NULL, 83, 111, '1）该项目因新增了1:1000区域内约220个鱼塘的水下地形测量任务、新增1:1000及1:2000地形图测绘任务、控制点联测任务等致使项目延期。前期已按14天申请借款，预计新增工作14天，按14天*4人=56人天借款；\n2）因测区内道路路况不好，需要租用四驱越野车进入；', NULL, '2023-10-24', 16097.00, 16097.00, '同意借款。', 83, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-24', '2023-10-26', '2023-10-27', NULL, NULL, '2023-11-01');
INSERT INTO `cmc_borrow` VALUES ('1648881418863131104', '1648881410643853314', '0', NULL, 61, 110, '1、现场安排人员2人，预计工期15天；\n2、进出场交通成本主要是往返机票；现场交通成本主要是工作期间使用车辆成本；', NULL, '2023-10-24', 12300.00, 9800.00, '已核，建议借款。', 61, '项目已外协，同意借款', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-25', '2023-10-26', '2023-10-27', NULL, NULL, '2023-11-01');
INSERT INTO `cmc_borrow` VALUES ('1648881418863141105', '1648881410643853314', '0', NULL, 61, 110, '拉萨坐标系转换费用', NULL, '2023-10-26', 12000.00, 12000.00, '情况属实，建议借款。', 61, '同意借款', 11, 2, '专款专用，结算时及时抵扣。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-26', '2023-10-30', '2023-11-03', NULL, NULL, '2023-11-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418863151106', NULL, '1', '购买测绘资料（内江、合江、古蔺、新庙4个中小抽蓄地形图）', 52, 109, '经营发展部联系项目部，需购买内江、合江、古蔺、新庙4个中小抽蓄1万地形图8幅。\n单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2024-03-14', 12000.00, 12000.00, '情况属实。', 46, '同意。', 9, 2, '同意拨付', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-14', '2024-03-14', '2024-03-18', NULL, NULL, '2024-03-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418863161107', '1648881410631270425', '0', NULL, 83, 111, '该项目现场开支由杨振垫付，现项目已结束，根据项目实际开支申请借款。', NULL, '2024-02-02', 2596.00, 2596.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-02-02', '2024-02-02', '2024-02-02', NULL, NULL, '2024-02-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418863171108', '1648881410631270435', '0', NULL, 71, 110, '项目生产测量组4人（杨为康、廖双、何锦鸿、赵永来）预计10天含进出场，共计40人天，飞行组3人（王刚、吴振、熊艳华）预计8天含进出场，共计24人天，车辆加油测量组预计2500元，飞行组预计2000元。', NULL, '2024-03-22', 16520.00, 14740.00, '项目开支，建议借款。', 60, '建议借支。', 10, 2, '同意拨付.', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-26', '2024-03-27', '2024-04-01', NULL, NULL, '2024-04-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418863181109', '1648881410631270436', '0', NULL, 83, 111, '1）该项目参与人员为杨振、杨晶、廖友福、张韦及司机次仁罗布，预计现场工作20日；\n2）目前背崩乡施工作业单位较多，宾馆紧张且价格较昂贵，食宿成本较高；\n3）计划现场租赁办理过派墨公路通行证的丰田普拉多越野车1台（排量为3.5L），车辆费用为700/天，司机费用为200/天，预计现场用车20天；\n4）因施测断面植被深厚，需聘请当地向导清理植被及搬运无人船至河边。预计聘请工人2名，预计用工10日；\n5）无人船托运费用为单程1600元（含保价费用）。', NULL, '2024-04-01', 63200.00, 39800.00, '情况属实。', 83, '租车费由财务转账支付；廖友福进出场费用已在其他项目借支。\n建议借支。', 10, 2, '财务部根据项目需求进行拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-01', '2024-04-02', '2024-04-05', NULL, NULL, '2024-04-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418863191110', NULL, '1', '阿坝1000kV变电站新建工程永久、临时土地使用报件服务  保证金保险费', 25, 105, '保证金保险费', NULL, '2024-04-07', 133.00, 133.00, '已核，拟同意。', 13, '同意', 7, 2, '同意拨付.', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-07', '2024-04-07', '2024-04-11', NULL, NULL, '2024-04-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418863201111', '1648881410631270453', '0', NULL, 102, 112, '二滩、桐子林监测项目4月成本支出。', NULL, '2024-04-12', 29388.00, 29388.00, '拟同意。', 101, '同意', 7, 2, '同意拨付', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-12', '2024-04-15', '2024-04-15', NULL, NULL, '2024-04-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418863211112', '1648881412384489473', '0', NULL, 113, NULL, '现场需开支共计139002元，使用时间至2024年5月底，其中房租和办公室租金为7月底。2024年2月已支付20000元商务费用，用于垫付实习生工资，本次借款共计119002元。', NULL, '2024-04-28', 139002.00, 119002.00, '金额已核，拟同意按此金额借款。', 59, '同意借款', 11, 2, '按需支付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-29', '2024-04-29', '2024-04-30', NULL, NULL, '2024-04-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418863221113', '1648881410631270438', '0', NULL, 71, 110, '1、控制点埋设3人（杨为康、王海宾、廖双）10天共30人天，水准观测2人（王海宾、廖双）23天共46人天，静态及三角高程观测4人（杨为康、杨晶、廖友福、张韦）12天共48人天。\n2、现场租用车辆（皮卡）650元一天（不含油）用于控制点埋设、静态及三角高程观测共计24天，现场租用车辆（面包车）500元一天（不含油）用于静态及水准观测共计23天，车辆加油费皮卡预计2500元，面包车预计2000元。\n3、用工成本控制点埋设及前期放线断面测量20天，水准测量每天两人46天。\n4、控制点埋设水泥450元，字模200元，框（3个尺寸）400元、埋点工具250元共计1300元。', NULL, '2024-05-08', 75770.00, 61090.00, '预算合理，明细清晰，建议借款。', 61, '建议借支。', 10, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-08', '2024-05-11', '2024-05-11', NULL, NULL, '2024-05-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418863231114', NULL, '1', '盐源县测绘标志普查维护工作项目数据处理技术服务费', 102, 112, '委托自然资源部大地测量数据处理中心，进行盐源县测绘标志普查维护工作项目数据处理。', NULL, '2024-03-23', 14620.00, 14620.00, '支付费用后，对方提供数据及发票，需尽快支付。对公支付账号，见附件：收据_2024-03-22_103534。', 102, '同意', 7, 2, '同意支付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-23', '2024-03-25', '2024-03-25', NULL, NULL, '2024-03-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418863241115', '1648881412040556545', '0', NULL, 81, NULL, '1.车辆费用2-3月加油费用。\n2.用餐成本2-3月现场4人，共计45天，共计费用9000元。\n3.房租2024年3月至2025年3月，共计费用12000元.\n4.项目水电气物管，合计1500元。\n5.用工成本，附件1', NULL, '2024-03-27', 54339.00, 54300.00, '费用已核，同意借款。', 59, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-28', '2024-03-29', '2024-04-01', NULL, NULL, '2024-04-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418863251116', '1648881410631270438', '0', NULL, 71, 110, '4人（杨为康、王海宾、廖双、董旭鹏）预计开展配合甲方踏勘、公路放线、地形图测量、断面测量、特征点测量10天，共计40人/天。现场租用车辆600元一天（不含油），配合勘察中心测量已开支费用5449.78元（含两人进场机票）。', NULL, '2024-04-18', 25637.80, 25637.80, '预算合理（不包含可能增加的控制测量工作），建议借款。', 61, '请项目负责人注意测量使用等成本控制，落实安全、质量管控措施。\n建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-19', '2024-04-28', '2024-04-29', NULL, NULL, '2024-04-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418863261117', '1648881410631270437', '0', NULL, 83, 111, '1）该项目参与人员为廖绍毅、罗毅、王海宾、黄建春，及租车司机1名，预计现场工作10天；\n2）现场聘请民工2人，预计用工7天；\n3）水位牌尺寸为小型标牌（单杆1.2m×0.9m）、大型标牌（双杆1.8m×1.2m）', NULL, '2024-03-29', 51100.00, 15700.00, '情况属实。', 83, '水位牌制作费用，由财务转账支付，不走借款流程。\n建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-29', '2024-03-29', '2024-04-01', NULL, NULL, '2024-04-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418863271118', NULL, '1', '2024年第1期企事业单位计算机及信息系统安全保密管理人员培训', 52, 109, '周文婷、 何杰2人培训费用\n户  名：成都市保密协会\n开户行：招商银行益州大道支行\n帐  号：128909489410703\n备注：计算机培训2024年4月20-21日', NULL, '2024-04-16', 1960.00, 1960.00, '情况属实。', 46, '同意。', 9, 2, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-16', '2024-04-16', '2024-04-17', NULL, NULL, '2024-04-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418863281119', NULL, '1', ' 四川省凉山州大桥水库库容曲线及蓄能曲线复核采购项目', 27, 105, ' 四川省凉山州大桥水库库容曲线及蓄能曲线复核采购项目招标文件购买', NULL, '2024-04-19', 500.00, 500.00, '情况属实。', 13, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-19', '2024-04-19', '2024-04-19', NULL, NULL, '2024-04-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418863291120', '1648881410631270441', '0', NULL, 33, 107, '3人，预计6天（进出场2天，工作4天）。', NULL, '2024-04-23', 5300.00, 5300.00, '同意', 32, '同意', 11, 2, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-24', '2024-04-25', '2024-04-25', NULL, NULL, '2024-04-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418863301121', NULL, '1', '四川省理塘抽水蓄能电站1∶10000地形地图测绘资料12幅', 52, 109, '经营发展部联系项目部，需购买理塘抽蓄1万地形图12幅。\n单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2024-04-28', 18000.00, 18000.00, '情况属实。', 46, '同意。', 9, 2, '同意。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-28', '2024-04-28', '2024-04-28', NULL, NULL, '2024-04-28');
INSERT INTO `cmc_borrow` VALUES ('1648881418863311122', '1648881412040556545', '0', NULL, 81, NULL, '1.车辆4月份加油费用。\n2.用餐成本4月份现场4个人，共计30天，共计费用6000元。\n3.项目部水电气费共计1000元。\n4.用工成本，4月份，生产人员共计16人。附件1', NULL, '2024-05-06', 51482.00, 51482.00, '已核，同意借款。', 59, '同意', 11, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-15', '2024-05-16', '2024-05-16', NULL, NULL, '2024-05-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418863321123', '1648881410631270444', '0', NULL, 32, 107, '按三人15天计划，三个项目（另外2个项目范围待定）同时借款', NULL, '2024-05-06', 9000.00, 9000.00, '同意借款，外业人员于5月6号出发。', 32, NULL, 11, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-06', '2024-05-09', '2024-05-09', NULL, NULL, '2024-05-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418863331124', '1648881410631270462', '0', NULL, 116, 113, '该项目位于新疆第六师106团，本次借款费用包括技术人员交通，食宿，现场汽车租赁，临时人员雇佣等；该项目勘察人员、设备已进场', NULL, '2024-05-06', 24600.00, 22850.00, '人员设备已进场，勘察生产任务已开始，同意借款', 116, '拟同意。', 13, 7, '按核准金额支付', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-06', '2024-05-09', '2024-05-09', NULL, NULL, '2024-05-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418863341125', '1648881410631270440', '0', NULL, 60, 110, '实际产生费用，参与人员3人，工期一天（含进出场）。', NULL, '2024-05-07', 727.00, 727.00, '项目实际产生费用，建议借款。', 60, '情况属实，建议借支。', 10, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-07', '2024-05-17', '2024-05-17', NULL, NULL, '2024-05-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418863351126', NULL, '1', '2024年信息体系审核（外审）', 52, 109, '收款单位：北京中大华远认证中心有限公司四川分公司\n开户银行：中信银行股份有限公司成都武侯支行\n账 号：7413310182600013961', NULL, '2024-02-28', 14000.00, 14000.00, '情况属实。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-02-28', '2024-03-04', '2024-03-04', NULL, NULL, '2024-03-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418863361127', NULL, '1', '川A1686T、川A1081W、川A9802U车辆保险费用，川A5177U燃油费用。', 16, 104, NULL, NULL, '2024-02-20', 20000.00, 20000.00, '同意', 8, '同意', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-02-21', '2024-02-21', '2024-02-21', NULL, NULL, '2024-02-22');
INSERT INTO `cmc_borrow` VALUES ('1648881418863371128', NULL, '1', '四川省测绘地理信息学会2024年会费', 52, 109, '开户名称：四川省测绘地理信息学会\n开户行：中国银行成都银都支行\n账户：1306 5874 9641\n备注内容：2024年度会费', NULL, '2024-03-04', 13000.00, 13000.00, '情况属实。', 46, '同意。', 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-04', '2024-03-06', '2024-03-11', NULL, NULL, '2024-03-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418863381129', NULL, '1', '购买测绘资料（广元龙池山抽蓄能、龚铜两站）', 52, 109, '经营发展部联系项目部，需购买广元龙池山抽蓄能电站1万地形图2幅、龚铜两站1万地形图27幅。\n单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2024-03-07', 43500.00, 43500.00, '情况属实。', 46, '同意。', 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-07', '2024-03-08', '2024-03-11', NULL, NULL, '2024-03-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418863391130', NULL, '1', '购买测绘资料（内江、合江、古蔺、新庙4个中小抽蓄地形图）-古蔺增加', 52, 109, '经营发展部联系项目部，需购买古蔺1万地形图一幅\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2024-04-07', 1500.00, 1500.00, '本次为增补。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-07', '2024-04-08', '2024-04-11', NULL, NULL, '2024-04-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418863401131', NULL, '1', '锦江区2024年老旧小区片区综合改造项目测绘项目报名费', 24, 105, '报名费：叁佰元整（&yen;300.00元）。\n报名费支付请在2024年4月10日17:00前汇款至以下账户：\n收款单位：四川珺合招标代理有限公司\n开 户 行：中国银行股份有限公司成都开发西区支行 \n银行账号：128032012275\n开户行行号：104651081114', NULL, '2024-04-10', 300.00, 300.00, '情况属实。', 20, '同意', 7, 2, '同意支付', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-10', '2024-04-11', '2024-04-11', NULL, NULL, '2024-04-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418863411132', NULL, '1', '四川省地理信息产业协会2024年度会费', 52, 109, '户名：四川省地理信息产业协会\n开户行：中信银行成都紫荆支行\n账号：8111 0010 1330 0013 443\n备注内容：四川中水2024年度会费', NULL, '2024-04-12', 30000.00, 30000.00, '情况属实。', 46, '同意。', 9, 2, '同意支付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-12', '2024-04-12', '2024-04-15', NULL, NULL, '2024-04-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418863421133', NULL, '1', '四川省凉山州大桥水库库容曲线及蓄能曲线复核采购项目', 27, 105, '四川省凉山州大桥水库库容曲线及蓄能曲线复核采购项目招标文件购买费用', NULL, '2024-04-18', 500.00, 500.00, '情况属实 ', 21, '同意', 2, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2024-04-18', '2024-04-18', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418863431134', NULL, '1', '国网拉萨发电公司2024年直孔、羊湖电站变形监测及资料整编项目招标代理服务费', 24, 105, '中标金额：129.4029万元，收取方式：按差额定率累进法收取；\n招标代理服务费金额：17352.00元（大写：壹万柒仟叁佰伍拾贰元整）\n转账方式：基本账户转出\n转账信息附后：\n银行账号：5405  0103  3636  0000  2127\n开户银行：中国建设银行股份有限公司拉萨林廓北路支行\n全称：西藏慧联电力实业有限公司\n财务联系人：冉庆、0891-6894381、0891-6984386', NULL, '2024-04-24', 17352.00, 17352.00, '情况属实！', 20, '同意', 7, 2, '同意。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-25', '2024-04-28', '2024-04-28', NULL, NULL, '2024-04-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418863441135', '1648881410631270420', '0', NULL, 113, 112, '本次请款17300元，其中生活成本至2024年5月底，预计30天；交通为两次往返现场及现场租车费用，预计10000元，住宿至2024年5月底，预计30天，共计费用4500元。其他费用预计1000元，包含监理，业主吃饭和现场打印等。', NULL, '2024-04-28', 17300.00, 0.00, '拟同意。', 101, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2024-04-28', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418863451136', NULL, '1', '“2024四川应急博览会”展位费', 9, 102, NULL, NULL, '2024-05-07', 8000.00, 8000.00, NULL, NULL, '同意', 7, 7, NULL, NULL, NULL, NULL, NULL, 28, NULL, NULL, NULL, '2024-05-07', '2024-05-13', NULL, NULL, '2024-05-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418863461137', NULL, '1', '科技查新《基于已知系统的运行期大坝水平位移监测控制网稳定性评判方法研究》', 56, 109, '公对公转账\n指定银行汇款方式\n公司名称：四川科智汇科技服务有限公司\n账号：5105 0144 6479 0000 0296\n开户行：中国建设银行股份有限公司成都东区支行', NULL, '2024-01-25', 2000.00, 2000.00, '情况属实。', 46, NULL, 9, 2, '尽快拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-25', '2024-01-25', '2024-01-26', NULL, NULL, '2024-01-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418863471138', '1648881410631270453', '0', NULL, 102, 112, '二滩、桐子林监测1月成本支出费用', NULL, '2024-01-30', 39532.00, 39532.00, '拟同意。', 101, '同意', 7, 2, '可以拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-01-30', '2024-02-04', '2024-02-05', NULL, NULL, '2024-02-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418863481139', NULL, '1', '大渡河猴子岩水电站外部变形监测工程项目', 101, 112, '大渡河猴子岩水电站外部变形监测项目于2012年3月～2022年12月（十年零十个月），本项目于2023年12月通过最终竣工审计，审计审定后最终合同总金额为4601万元。目前剩余251万元尚未收款，预计2月9日前完成回款。本项目至此全部工作内容结束。本次借款为补充借款，借款费用计入项目成本，费用支出情况已向分管领导汇报。', NULL, '2024-01-30', 80000.00, 80000.00, '请领导审核。', 101, '同意', 7, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-30', '2024-01-30', '2024-01-30', NULL, NULL, '2024-02-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418863491140', NULL, '1', '公司捐款', 64, 110, '公司向 成都市慈善总会青羊区草堂街道慈善基金会 捐款，李敏代办。', NULL, '2024-02-02', 10000.00, 10000.00, '情况属实，完善流程。', 61, '同意', 2, 2, '尽快拨付', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-02-02', '2024-02-02', '2024-02-02', NULL, NULL, '2024-02-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418863501141', NULL, '1', '浙江桐庐抽水蓄能电站施工测量控制网建立服务', 25, 105, '投标保证金保险 保费', NULL, '2024-02-19', 472.50, 472.50, '属实 同意支付', 21, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-02-19', '2024-02-19', '2024-02-19', NULL, NULL, '2024-02-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418863511142', '1648881410631270430', '0', NULL, 61, 110, '按项目实际开支借款。', NULL, '2024-03-05', 2439.40, 2439.40, '情况属实，建议借款。', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-05', '2024-03-06', '2024-03-11', NULL, NULL, '2024-03-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418863521143', NULL, '1', '成都高新区“实景三维成都”建设服务项目（包1）中标服务费', 26, 105, '成都高新区“实景三维成都”建设服务项目（包1）中标服务费，代理机构账户信息请见附件。', NULL, '2024-03-07', 60557.00, 60557.00, '已核，情况属实。', 13, '同意', 7, 2, '尽快支付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-07', '2024-03-08', '2024-03-11', NULL, NULL, '2024-03-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418863531144', NULL, '1', '云南省金沙江金安桥水电站库区淤泥测量及库容曲线复核项目投标担保费', 30, 106, NULL, NULL, '2024-03-15', 800.00, 800.00, NULL, 14, '同意拨付', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-15', '2024-03-18', '2024-03-18', NULL, NULL, '2024-03-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418863541145', '1648881410631270434', '0', NULL, 60, 110, '参与人员3人（含司机），预计工期10天（含进出场）。', NULL, '2024-03-15', 6200.00, 6200.00, '项目开支，建议借款。', 60, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-15', '2024-03-26', '2024-04-01', NULL, NULL, '2024-04-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418863551146', '1648881410631270435', '0', NULL, 71, 110, '因现场天气不好（下雪）导致工期延长，项目食宿成本增加。项目生产实际开支18457.24元，2024年3月22日已借款14740元，现申请补充借款3717.24元。', NULL, '2024-04-07', 3717.20, 3717.20, '情况属实，建议借款。', 61, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-07', '2024-04-09', '2024-04-11', NULL, NULL, '2024-04-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418863561147', '1648881410631270439', '0', NULL, 32, 107, '根据相关政策，外业现场作业需要办理入山许可证。需向木里县应急管理局缴纳责任押金，外业工作结束后申请退还。对公转账账号如下：\n名称：木里藏族自治县应急管理局\n账号：17010537000003265\n开户行：四川银行股份有限公司凉山木里支行', NULL, '2024-04-15', 30000.00, 30000.00, NULL, 32, '同意借款，对公办理', 11, 2, '尽快办理。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-15', '2024-04-15', '2024-04-15', NULL, NULL, '2024-04-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418863571148', NULL, '1', '2024-2025年度辅助测量工作框架技术服务+标书购买费', 25, 105, NULL, NULL, '2024-04-30', 800.00, 800.00, '情况属实，建议借款。', 20, '同意', 7, 2, '同意。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-30', '2024-04-30', '2024-04-30', NULL, NULL, '2024-04-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418863581149', '1648881410631270439', '0', NULL, 32, 107, '按现场实际成本增加此借款', NULL, '2024-05-08', 2638.00, 2638.00, '同意', 32, NULL, 11, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-08', '2024-05-09', '2024-05-09', NULL, NULL, '2024-05-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418863591150', '1648881410631270429', '0', NULL, 83, 111, '1）该项目参与人员为杨晶、蒋剑虹、罗毅、赵永来，因测区近日降雪、降雨频繁，预计现场工作16日，进出场共4日；\n2）车辆加油费为进出场油费3000元，现场每日工作油费150元*16日，合计5400元；', NULL, '2024-03-01', 20000.00, 16200.00, '情况属实。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-01', '2024-03-01', '2024-03-04', NULL, NULL, '2024-03-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418863601151', '1648881410631270431', '0', NULL, 71, 104, '猴子岩水电站江口村及周边1:1000地形地类图测绘项目垫付生产费用共计5225元，外业共计29人天（其中航飞组9人天，测量组20人天）。', NULL, '2024-03-01', 5225.00, 5255.00, '情况属实，建议借款', 61, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-01', '2024-03-05', '2024-03-11', NULL, NULL, '2024-03-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418863611152', '1648881410631270407', '0', NULL, 101, 112, '本费用为大岗山监测设施完善项目2024年3月项目 现场成本计划开支。', NULL, '2024-03-03', 25100.00, 25100.00, '请审核。', 101, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-03', '2024-03-05', '2024-03-11', NULL, NULL, '2024-03-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418863621153', NULL, '1', '公司接待宴请付款', 8, 104, '接待费用预支，情况属实！', NULL, '2024-03-05', 20000.00, 20000.00, '情况属实，同意办理', 8, '同意', 2, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-05', '2024-03-11', '2024-03-11', NULL, NULL, '2024-03-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418863631154', '1648881410631270433', '0', NULL, 83, 111, NULL, NULL, '2024-03-18', 1698.00, 1698.00, '该项目于3月14日~3月16日开展作业，根据现场实际开支情况进行借款，附件为开支明细。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-18', '2024-03-19', '2024-03-19', NULL, NULL, '2024-03-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418863641155', '1648881410643853314', '0', NULL, 61, 110, '1、本次借款为项目新增工作实际已发生开支（项目开展时间为2024.2.29-2024.3.26）；\n2、其他成本包括现场交通、千寻账号、设备邮寄等；', NULL, '2024-03-28', 14451.00, 14451.00, '实际发生，金额已核，建议借款。', 61, '情况属实，建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-28', '2024-04-02', '2024-04-05', NULL, NULL, '2024-04-08');
INSERT INTO `cmc_borrow` VALUES ('1648881418863651156', '1648881410631270443', '0', NULL, 33, 107, '预计10天（包含进出场），4人。', NULL, '2024-04-30', 8700.00, 8700.00, '同意', 32, NULL, 11, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-01', '2024-05-09', '2024-05-09', NULL, NULL, '2024-05-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418863661157', '1648881410631270463', '0', NULL, 61, 110, '项目参与人员3人（含驾驶员），预计工期25天；', NULL, '2024-05-11', 21240.00, 16520.00, '建议借款。', 61, '建议借支。', 10, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-11', '2024-05-27', '2024-05-27', NULL, NULL, '2024-05-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418863671158', NULL, '1', '四川省甘孜抽水蓄能电站1∶10000地形图测绘资料5幅', 52, 109, '经营发展部联系项目部，需购买甘孜抽蓄1万地形图5幅。\n单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2024-05-13', 7500.00, 7500.00, '情况属实。', 46, '同意。', 9, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-13', '2024-05-14', '2024-05-14', NULL, NULL, '2024-05-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418863681159', '1648881410631270445', '0', NULL, 61, 110, '1、本次借款为前期配合测量阶段预借款；\n2、计划参与人员3人（含驾驶员）；\n3、与甲方协商预计工期为30天；', NULL, '2024-05-21', 19400.00, 17900.00, '建议借款。', 61, '建议借支。', 10, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-21', '2024-06-03', '2024-06-03', NULL, NULL, '2024-06-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418863691160', '1648881410631270407', '0', NULL, 101, 112, '本费用为大岗山监测设施完善项目2024年5月项目 现场成本计划开支。', NULL, '2024-05-17', 19460.00, 19460.00, '请领导审核。', 101, '同意', 7, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-17', '2024-05-23', '2024-05-23', NULL, NULL, '2024-05-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418863701161', NULL, '1', '国网拉萨发电公司2024年直孔、羊湖电站变形监测及资料整编', 48, 109, NULL, NULL, '2024-05-20', 49990.00, 49990.00, '满足项目需求。', 46, '同意。', 9, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-20', '2024-05-20', '2024-05-20', NULL, NULL, '2024-05-23');
INSERT INTO `cmc_borrow` VALUES ('1648881418863711162', NULL, '1', '购买成都东区地形图', 52, 109, '经营发展部联系项目部，需购买成都东区区域1万地形图1幅。\n单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2024-01-29', 1500.00, 1500.00, '情况属实。', 46, '同意。', 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-29', '2024-01-29', '2024-01-29', NULL, NULL, '2024-02-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418863721163', '1648881410631270428', '0', NULL, 32, 107, '机票为王刚朱倪强替换交通费用', NULL, '2024-01-29', 7660.00, 7660.00, '按实际花销增补此借款', 32, '建议借支。', 10, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-29', '2024-01-29', '2024-01-30', NULL, NULL, '2024-02-01');
INSERT INTO `cmc_borrow` VALUES ('1648881418863731164', NULL, '1', '其他成本', 14, 106, NULL, NULL, '2024-02-01', 130000.00, 130000.00, NULL, 14, '同意。', 2, 2, '尽快支付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-02-01', '2024-02-01', '2024-02-01', NULL, NULL, '2024-02-01');
INSERT INTO `cmc_borrow` VALUES ('1648881418863741165', '1648881410631270427', '0', NULL, 83, 111, '该项目现场开支由杨振垫付，项目现已结束，根据项目实际开支情况申请项目借款。', NULL, '2024-02-02', 1496.00, 1496.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-02-02', '2024-02-02', '2024-02-02', NULL, NULL, '2024-02-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418863751166', NULL, '1', '无人机驾驶员培训（考证）服务协议书', 37, 107, '无人机培训费用', NULL, '2024-02-05', 17100.00, 17100.00, '已签署无人机驾驶员培训服务协议书', 32, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-02-05', '2024-02-19', '2024-02-19', NULL, NULL, '2024-02-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418863761167', '1648881412384489473', '0', NULL, 113, NULL, '年前现场用于协调沟通', NULL, '2024-02-05', 20000.00, 20000.00, '已知悉，拟同意借款。', 59, '同意借款', 11, 2, '可以拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-02-06', '2024-02-19', '2024-02-26', NULL, NULL, '2024-02-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418863771168', '1648881411067478017', '0', NULL, 61, 110, '1、土建工期预计20预计投入人员4人（含驾驶员）；\n2、测量工作预计工期30天，预计投人员8人（含驾驶员2人）；\n3、土建预计投入民工165人天（含指示牌安装），水准测量预计投入民工64人天；\n4、机动船预计使用天数50天，单价含油费；\n5、土建材料费用、民工单价、现场人员吃住成本，参照前期实际单价；\n6、补充借款为前期已发生并垫付的费用，按实际金额借款。', NULL, '2024-03-05', 220404.00, 220404.00, '已核，建议借支。', 61, '请财务按项目实际开支，分批借支。\n建议借支。', 10, 2, '直接生产成本偏高，须精心安排工作，本次借款按需拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-05', '2024-03-11', '2024-03-11', NULL, NULL, '2024-03-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418863781169', '1648881410631270461', '0', NULL, 109, 112, '备注：1、本次借款是2024年西藏监测项目第一次借款\n2、本次借款计划3个月使用，即2023年3月至2023年6月，按2人常驻现场计划；\n3、因《国网拉萨发电公司2024年羊湖电站取水口水位及压力钢管变形监测控制网复测校核》项目土建方案要与业主商议确定，本次借款不含《国网拉萨发电公司2024年羊湖电站取水口水位及压力钢管变形监测控制网复测校核》项目的土建施工费用；', NULL, '2024-03-07', 75400.00, 75400.00, '拟同意。', 101, '同意', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-07', '2024-03-11', '2024-03-11', NULL, NULL, '2024-03-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418863791170', '1648881410631270432', '0', NULL, 83, 111, '1）本项目参与人员为廖绍毅、黄建春及租车司机，预计现场工作8日；\n2）高程转换由自然资源部大地测量数据处理中心完成，费用为10点共2000元。', NULL, '2024-03-18', 15930.00, 15930.00, '情况属实。', 83, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-18', '2024-03-19', '2024-03-19', NULL, NULL, '2024-03-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418863801171', NULL, '1', '国网浙江紧水滩电厂2024年水库库容复核', 23, 105, '项目保证金金额为4万元，本次保证金以保证保险形式缴纳，保单保费需从公司基本帐户转出。请于2024年3月22日前转出。', NULL, '2024-03-19', 280.00, 280.00, '已核，建议借支。', 13, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-19', '2024-03-19', '2024-03-19', NULL, NULL, '2024-03-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418863811172', '1648881411499491350', '0', NULL, 61, 110, '项目计划人员4人（含驾驶员），计划工期7天（含进出场）；', NULL, '2023-09-27', 4060.00, 4060.00, '情况属实，建议借款。', 61, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-27', '2023-09-28', '2023-09-28', NULL, NULL, '2023-10-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418863821173', NULL, '1', '购买邻水1万地形图S46合川经邻水至长寿高速公路项目', 52, 109, '购买测绘资料\n单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2023-09-28', 19500.00, 19500.00, '情况属实。', 46, NULL, 9, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-09-28', '2023-09-28', '2023-10-06', NULL, NULL, '2023-10-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418863831174', NULL, '1', '购买新入职员工（罗毅）商业保险', 58, 104, '请转账以下账户：\n账号名称：中国人民人寿保险股份有限公司四川省分公司\n开 户 行：中国工商银行成都建设路支行\n账    号：4402008619000008297', NULL, '2023-10-15', 1180.00, 1180.00, NULL, 8, '同意', 2, 2, '尽快支付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-15', '2023-10-17', '2023-10-17', NULL, NULL, '2023-10-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418863841175', NULL, '1', '西藏项目投标差旅费', 13, 105, NULL, NULL, '2023-10-19', 50000.00, 50000.00, '已核，情况属实。', 13, '同意', 7, 2, '同意', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-19', '2023-10-20', '2023-10-27', NULL, NULL, '2023-10-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418863851176', NULL, '1', '塔里木河流域水土流失变化监测项目-水土流失监测数据整理与入库（第四包）中标服务费', 23, 105, '开户名称：&nbsp;新疆天壹中山工程咨询有限公司\n开户行：工行乌鲁木齐克拉玛依西路支行&nbsp;\n账&nbsp;&nbsp;&nbsp;号：3002014219200019549；\n行&nbsp;&nbsp;&nbsp;号：102881001423\n备注：塔里木河流域水土流失变化监测项目-水土流失监测数据整理与入库（第四包）中标服务费', NULL, '2023-10-23', 6750.00, 6750.00, '已核，19年项目，未支付该费用已核。', 13, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-10-23', '2023-10-23', '2023-11-03', NULL, NULL, '2023-11-07');
INSERT INTO `cmc_borrow` VALUES ('1648881418863861177', '1648881411499491336', '0', NULL, 61, 110, '1、项目预计参与人员4人（含驾驶员）；\n2、项目预计工期8天（含进出场）；', NULL, '2023-11-27', 6960.00, 6320.00, '建议借款', 61, '建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-11-27', '2023-11-28', '2023-11-30', NULL, NULL, '2023-12-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418863871178', '1648881410631270407', '0', NULL, 101, 112, '第1项采购已向分管领导汇报，并说明原因和情况。第2项～第5项为2023年12月份现场生活、生产开支。', NULL, '2023-12-06', 89600.00, 89600.00, '据实借支。', 101, '同意', 7, 2, '按需拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-06', '2023-12-08', '2023-12-08', NULL, NULL, '2023-12-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418863881179', '1648881411499491341', '0', NULL, 60, 110, NULL, NULL, '2023-12-06', 8452.00, 8452.00, '情况属实，建议借款。', 60, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-06', '2023-12-08', '2023-12-08', NULL, NULL, '2023-12-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418863891180', '1648881410631270451', '0', NULL, 32, 107, '按3人10天计划，数据采集+像控点测量', NULL, '2024-01-05', 11600.00, 11600.00, '外业人天已于1月5号出发', 32, '同意借款', 11, 2, '同意拨付', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-05', '2024-01-08', '2024-01-09', NULL, NULL, '2024-01-10');
INSERT INTO `cmc_borrow` VALUES ('1648881418863901181', '1648881411499491332', '0', NULL, 84, 111, '外业组3人，含驾驶员1人。预计外业工期8天，含进出场4天，共计24人天。', NULL, '2023-12-08', 10300.00, 9340.00, NULL, 84, '建议借支。', 10, 2, '同意拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2023-12-08', '2023-12-11', '2023-12-14', NULL, NULL, '2023-12-14');
INSERT INTO `cmc_borrow` VALUES ('1648881418863911182', NULL, '1', '公司团年、公司评优奖金', 8, 104, '评优奖金：先进集体5000*3=15000元，优秀个人1000*26=26000元；奖杯、奖牌、证书等制作预估800元；餐费预估1588*15=23820元；酒水预估380*15=5700元；会场布置装饰预估1000元；游戏幸运抽奖环节3000元。合计75320元！！', NULL, '2024-01-09', 76000.00, 76000.00, '情况属实，建议借款！', 8, '同意。', 2, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-09', '2024-01-18', '2024-01-18', NULL, NULL, '2024-01-18');
INSERT INTO `cmc_borrow` VALUES ('1648881418863921183', '1648881412384489473', '0', NULL, 113, NULL, '本次借款70964元。其中人员成本为：实习生一人，从2022年12月份至2023年9月份，共计参与项目生产170天，单价为60/天，计金额10200元；2023年11月开始，项目部招聘9人参与项目生产，每人每月工资2500元，截止2024年1月底，参加生产时间为2.4月，有两人提前离开，分别支付工资为2373和2213元，计金额为46586元（2500*2.4*7+2373+2213），人员工资合计56786元；宿舍租金4000元，续租到2024年7月底；办公室租金8402，续租一个季度；交通成本：现场人员往返成都，共计16人/次，单次金额111元，合计1776元。综上所述，本次借款金额为70964元。', NULL, '2024-01-24', 70964.00, 70964.00, '同意借款。', 112, '同意', 11, 2, '可以拨付。', NULL, NULL, NULL, NULL, 14, NULL, NULL, '2024-01-25', '2024-01-25', '2024-01-30', NULL, NULL, '2024-02-05');
INSERT INTO `cmc_borrow` VALUES ('1648881418863931184', NULL, '1', '2024年测绘地理信息业务技能培训费', 56, 109, '公对公转账\n收款单位：四川五维地理信息技术有限公司\n开户银行：中国农业银行股份有限公司成都大源支行\n账号：2291 1201 0400 05094\n银行行号：103651091120\n须备注：业务技能培训费（郎悟灵）', NULL, '2024-05-08', 200.00, 200.00, '因需要公对公转，所以借款。', 46, '同意。', 9, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-08', '2024-05-08', '2024-05-09', NULL, NULL, '2024-05-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418863941185', NULL, '1', '阿坝1000kV 变电站新建工程永久、临时土地使用报件服务代理服务费', 25, 105, '具体转账金额及转账备注请查看附件：招标代理服务费收费通知', NULL, '2024-05-10', 13493.90, 13493.90, '已核。', 13, '同意', 7, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-10', '2024-05-10', '2024-05-10', NULL, NULL, '2024-05-11');
INSERT INTO `cmc_borrow` VALUES ('1648881418863951186', '1648881410631270453', '0', NULL, 102, 112, '二滩和桐子林两站监测5月成本开支。', NULL, '2024-05-14', 34708.00, 34708.00, '拟同意。', 101, '同意', 7, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-14', '2024-05-16', '2024-05-16', NULL, NULL, '2024-05-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418863961187', '1648881410631270409', '0', NULL, 145, 115, '1，时间段2023年8月至2024年2月。2，项目垫支内容包含（出场费用，仪器托运等）。', NULL, '2024-02-21', 36594.00, 36594.00, '已核，同意', 15, '同意借款', 11, 2, '同意', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2024-02-22', '2024-02-22', '2024-03-11', NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418863971188', '1648881410631270426', '0', NULL, 83, 111, '该项目现场开支由杨振垫付，现项目已结束，根据项目实际开支申请借款。', NULL, '2024-02-02', 1871.00, 1871.00, '同意借款。', 83, '情况属实，建议借支。', 10, 2, '同意拨付', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-02-02', '2024-02-02', '2024-02-02', NULL, NULL, '2024-02-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418863981189', '1648881410631270453', '0', NULL, 102, 112, '二滩、桐子林监测项目2月份成本支出费用。', NULL, '2024-02-23', 25850.00, 25850.00, '拟同意。', 101, '同意', 7, 2, '可以拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-02-24', '2024-02-26', '2024-02-26', NULL, NULL, '2024-02-26');
INSERT INTO `cmc_borrow` VALUES ('1648881418863991190', '1648881410631270451', '0', NULL, 32, NULL, '新增作业范围，工期紧，按3人7天计划', NULL, '2024-03-17', 6500.00, 6500.00, '计划3月18号出发', 32, '同意借款', 11, 2, '可以拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-17', '2024-03-18', '2024-03-18', NULL, NULL, '2024-03-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418864001191', '1648881410631270453', '0', NULL, 102, 112, '二滩、桐子林监测项目2024年3月现场预支费用。', NULL, '2024-03-22', 35526.00, 35526.00, '拟同意。', 101, '同意', 7, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-03-23', '2024-03-25', '2024-03-25', NULL, NULL, '2024-03-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418864011192', '1648881410631270407', '0', NULL, 101, 112, '本费用为大岗山监测设施完善项目2024年4月项目 现场成本计划开支。', NULL, '2024-04-11', 35800.00, 35800.00, '请审核。', 101, '同意', 7, 2, '可以拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-11', '2024-04-11', '2024-04-15', NULL, NULL, '2024-04-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418864021193', '1648881410631270439', '0', NULL, 32, 107, '计划5人12天（含司机），已于4月10号出发。', NULL, '2024-04-12', 16400.00, 16400.00, NULL, 32, '同意借款', 11, 2, '同意拨付。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-12', '2024-04-12', '2024-04-15', NULL, NULL, '2024-04-16');
INSERT INTO `cmc_borrow` VALUES ('1648881418864031194', NULL, '1', '国网拉萨发电公司2024年羊湖电站取水口水位及压力钢管变形监测控制网复测校核项目招标代理服务费', 24, 105, '中标金额：126.2872万元，收取方式：按差额定率累进法收取；\n代理服务费金额：17103.00元（大写：壹万柒仟壹佰零叁元整）\n转账方式：基本账户转出\n银行账号：5405  0103  3636  0000  2127\n开户银行：中国建设银行股份有限公司拉萨林廓北路支行\n全称：西藏慧联电力实业有限公司\n财务联系人：冉庆、0891-6894381、0891-6984386', NULL, '2024-04-24', 17103.00, 17103.00, '情况属实。', 20, '同意', 7, 2, '同意。', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-25', '2024-04-28', '2024-04-28', NULL, NULL, '2024-04-19');
INSERT INTO `cmc_borrow` VALUES ('1648881418864041195', NULL, '1', '南江抽水蓄能电站1万地形图6幅', 52, 109, '经营发展部联系项目部，需购买南江抽蓄1万地形图6幅。\n单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2024-04-24', 9000.00, 9000.00, '情况属实。', 46, '同意。', 9, 2, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-25', '2024-04-25', '2024-04-25', NULL, NULL, '2024-04-25');
INSERT INTO `cmc_borrow` VALUES ('1648881418864051196', '1648881410631270461', '0', NULL, 109, 112, NULL, NULL, '2024-04-30', 139000.00, 139000.00, '拟同意，可分批次支付。', 101, NULL, 7, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-04-30', '2024-05-16', '2024-05-16', NULL, NULL, '2024-05-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418864061197', NULL, '1', '锦屏一级、二级水电站2025年水库防洪抢险应急预案及溃坝影响分析编制1万地形图', 52, 109, '经营发展部联系项目部，需购买锦屏一、二级水电站1万地形图38幅。\n单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2024-06-05', 57000.00, 57000.00, '情况属实。', 46, '同意。', 9, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-06-05', '2024-06-05', '2024-06-06', NULL, NULL, '2024-06-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418864071198', '1648881410631270449', '0', NULL, 83, 111, '1）该项目参与人员为廖绍毅、吴振、唐伟、熊艳华，预计外业工期20日（进出场共8日，现场工作12天）；\n2）廖绍毅、吴振乘飞机至林芝，预计费用为1000元/人；\n3）加油费为进出场单程2100km，2100km*1元*2次，现场开展工作加油费用预估150元*12天，共计6000元。', NULL, '2024-06-06', 21840.00, 20840.00, '同意借款。', 83, '建议借支。', 10, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-06-06', '2024-06-11', '2024-06-12', NULL, NULL, '2024-06-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418864081199', '1648881410631270407', '0', NULL, 101, 112, '本费用为大岗山监测设施完善项目2024年6月项目现场成本计划开支。5月、6月由于有大量设备现场安装和调试工作（涉及6个厂家），其中部分厂家在前期合同中未含有现场安装费用，部分设备需解决现场通讯网络、电源敷设、防雷措施等工作。因此本月开支较大。', NULL, '2024-06-17', 51800.00, 51800.00, '请领导批示！', 101, '同意', 7, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-06-17', '2024-06-17', '2024-06-17', NULL, NULL, '2024-06-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418864091200', NULL, '1', '四体系外审费用', 52, 109, '2024年四体系外审认证费用\n初(再认证)审费：45000.00（大写：肆万伍仟元整）\n合 计：45000.00（大写：肆万伍仟元整）\n汇款方式如下：\n收款单位：北京中大华远认证中心有限公司四川分公司\n开户银行：中信银行股份有限公司成都武侯支行\n账 号：7413310182600013961', NULL, '2024-06-25', 45000.00, 0.00, '情况属实。', 46, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2024-06-25', NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418864101201', '1648881411235250178', '0', NULL, 83, 111, '1）该项目2024年3月15日~5月20日产生费用11711元，明细请见附件；\n2）机票为董旭鹏返程、李磊进出场费用；\n3）用餐成本为暂按2人*2月预算；\n4）因甲方通知到林芝市、墨脱县、朗县等地开会，乘坐公共交通工具或到当地住宿，按各1000元进行预算。', NULL, '2024-05-21', 28711.00, 28711.00, '同意借款。', 83, '建议借支。', 10, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-21', '2024-05-27', '2024-05-27', NULL, NULL, '2024-05-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418864111202', '1648881410631270446', '0', NULL, 83, 111, '1）该项目测绘工程中心计划投入3人，司机1人，预计现场工作10日（进出场2日）；\n2）因测区正值雨季、植被深厚，需聘请当地向导带路、清理低矮植被、辅助测量树木胸径等，预计需要2人*6天；\n3）车辆租赁自长期合作的租车公司，已办理有派墨通行证的丰田普拉多（3.5L）一辆，费用为900/天，预计现场用车10日，该费用后期需由财务部对公支付。', NULL, '2024-05-23', 15320.00, 14820.00, '同意借款。', 83, '建议借支。', 10, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-23', '2024-05-27', '2024-05-27', NULL, NULL, '2024-05-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418864121203', NULL, '1', '”成都科创贷“担保费', 30, 106, '成都中小企业融资担保有限责任公司\n开户行：成都银行体育场路支行\n户号：30022010218611500012', NULL, '2024-06-04', 200000.00, 200000.00, NULL, 14, '同意拨付。', 2, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-06-04', '2024-06-04', '2024-06-06', NULL, NULL, '2024-06-06');
INSERT INTO `cmc_borrow` VALUES ('1648881418864131204', NULL, '1', '广安1万地形图', 52, 109, '陈洪联系项目部，需购买广安1万地形图3幅。\n单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2024-06-11', 4500.00, 4500.00, '情况属实。', 46, '同意。', 9, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-06-11', '2024-06-11', '2024-06-11', NULL, NULL, '2024-06-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418864141205', '1648881410631270453', '0', NULL, 102, 112, '二滩、桐子林监测项目6月成本支出。', NULL, '2024-06-12', 29388.00, 29388.00, '拟同意', 101, '同意', 7, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-06-12', '2024-06-17', '2024-06-17', NULL, NULL, '2024-06-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418864151206', NULL, '1', '浙江柯城抽水蓄能电站施工测量控制网建立与复测服务投标保证金保险费', 26, 105, '浙江柯城抽水蓄能电站施工测量控制网建立与复测服务投标保证金保险费，请用基本账户转账支付。', NULL, '2024-06-13', 420.00, 420.00, '已核。', 13, '同意', 11, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-06-17', '2024-06-17', '2024-06-17', NULL, NULL, '2024-06-17');
INSERT INTO `cmc_borrow` VALUES ('1648881418864161207', '1648881410631270461', '0', NULL, 109, 112, '备注：根据目前项工作情况，《国网拉萨发电公司2024年羊湖电站取水口水位及压力钢管变形监测控制网复测校核》项目外业工作预计在6月20日前结束，预计后期成本支出需增补借款31480元。', NULL, '2024-06-14', 31480.00, 31480.00, '情况属实，本项目现场地处西藏高海拔地区，成本支出综合单价较高。现场成本涉及人员进出场、食宿成本、民工成本、租车成本、导水槽土建施工、多个项目来回交叉作业等。现场开支较大，羊湖项目将在6月20日结束，民工费、租车费等需进行完工结清，望财务部尽快给予支付，谢谢！', 101, '同意', 7, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-06-14', '2024-06-17', '2024-06-17', NULL, NULL, '2024-06-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418864171208', '1648881412040556545', '0', NULL, 81, NULL, '1.车辆5月份加油费用。\n2.用餐成本5月份现场4人，共计30天，共计费用6000元。\n3.用工成本5月份，生产共计16人，附件1', NULL, '2024-06-17', 94531.00, 94531.00, '已核，同意。', 59, '同意，项目完成及时结算', 11, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-06-18', '2024-06-18', '2024-06-19', NULL, NULL, '2024-06-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418864181209', '1648881410631270464', '0', NULL, 61, 110, '该项目已完成首期外业工作，按实际开支申请借款。', NULL, '2024-05-22', 2701.30, 2701.30, '按实际开支借款。', 61, '情况属实，建议借支。', 10, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-22', '2024-06-03', '2024-06-03', NULL, NULL, '2024-06-04');
INSERT INTO `cmc_borrow` VALUES ('1648881418864191210', NULL, '1', '水口集团公司2024年-2025年街面电站控制网复测服务', 23, 105, '开户名称：福建省亿力建设工程有限公司\n开户银行：中国建设银行股份有限公司福州城北支行\n帐号：3505 0189 0007 0000 1668\n备注：水口集团公司2024年-2025年街面电站控制网复测服务中标服务费', NULL, '2024-05-22', 5009.00, 5009.00, '已核，情况属实。', 13, '同意', 11, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-22', '2024-05-23', '2024-05-23', NULL, NULL, '2024-05-30');
INSERT INTO `cmc_borrow` VALUES ('1648881418864201211', NULL, '1', '永川区国土空间三维实景图建设（YCQ24C00031）招标文件获取费', 24, 105, '采购文件购买费用汇款账户信息：\n户  名：重庆博业招标代理有限公司\n开户行：中国工商银行股份有限公司重庆永川支行\n账  号：3100090009200317416\n3、招标文件售价：人民币500.00元/包。\n支付备注：永川区国土空间三维实景图建设（YCQ24C00031）。', NULL, '2024-06-11', 500.00, 500.00, '已核。', 13, '同意', 11, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-06-11', '2024-06-11', '2024-06-12', NULL, NULL, '2024-06-12');
INSERT INTO `cmc_borrow` VALUES ('1648881418864211212', NULL, '1', '投标备用金', 24, 105, '投标备用金用于：投标项目的标书购买、平台维护及使用、CA证书办理及续期。', NULL, '2024-06-25', 20000.00, 0.00, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418864221213', '1648881410631270450', '0', NULL, 83, 111, '1）用餐成本为开展临时界桩测设工作期间由我方暂垫付工作组（雅江公司、成都院城乡分公司、政府工作组、我公司）每日餐饮费用，项目预计工期为60天，暂按15人*2餐*30天申请借款，后期根据实际情况再补充借款；\n2）住宿成本暂按我方投入4人*30天申请借款，后期根据实际情况再补充借款；\n3）前期开展筹备工作需要临时短期租车，暂按10日申请借款，待工作确定后再由公司派车至现场参与工作；', NULL, '2024-06-11', 127300.00, 66000.00, '同意借款。', 83, '暂同意借支66000元。\n后续申请借款，须同时提交之前开支明细及相关部门参与人员情况明细。\n建议借支。', 10, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-06-12', '2024-06-14', '2024-06-14', NULL, NULL, '2024-06-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418864231214', NULL, '1', '一种基于已知系统归算的全站仪极坐标监测方法，申请费 、实审费', 52, 109, '一种基于已知系统归算的全站仪极坐标监测方法，申请费 、实审费\n开户名：国家知识产权局专利局成都代办处\n开户行：中国农业银行股份有限公司成都蜀都支行\n账  号：229201010400233120000000001', NULL, '2024-06-17', 3450.00, 3450.00, '情况属实。', 46, '同意。', 9, 7, '已核', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-06-17', '2024-06-18', '2024-06-19', NULL, NULL, '2024-06-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418864241215', NULL, '1', '大渡河风光一体化项目1万地形图', 52, 109, '经营发展部联系项目部，需购买大渡河风光一体化项目1万地形图21幅。\n单位名称：自然资源部四川基础地理信息中心\n开户行：交通银行股份有限公司成都创业路支行\n账号：511610015018170164580\n纳税人识别号：12100000717820559x\n地址：四川省成都市高新区九兴大道7号\n电话：025-66065495', NULL, '2024-06-17', 31500.00, 31500.00, '情况属实。', 46, '同意。', 9, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-06-17', '2024-06-17', '2024-06-17', NULL, NULL, '2024-06-20');
INSERT INTO `cmc_borrow` VALUES ('1648881418864251216', '1648881410631270467', '0', NULL, 101, 112, '预计工天20～25天完成外业工作，参与人数5人：周全、黄安堂、向艳雄、蒲帆、康科伟。项目所在地路程较远，单边约2100km，当地气温炎热，近期温度约在27℃～36℃。', NULL, '2024-06-25', 35400.00, 29400.00, '请领导审核。', 101, '已经派车了，往返交通费？', 7, 7, '按29400元借款', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-06-25', '2024-06-28', '2024-06-28', NULL, NULL, '2024-07-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418864261217', '1648881410631270465', '0', NULL, 71, 110, '外业组6人预计136人天，航飞组3人预计30人天，车辆加油外业组预计2800元，航飞组预计1200元。水准预计开展13天，需临聘民工2人共计26人天。', NULL, '2024-06-20', 32450.00, 29130.00, '项目开支，建议借款。', 60, '建议借支', 10, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-06-21', '2024-06-26', '2024-06-28', NULL, NULL, '2024-07-02');
INSERT INTO `cmc_borrow` VALUES ('1648881418864271218', NULL, '1', '高海拔大高差大温差地区三维监测关键技术研究及工程应用', 25, 105, '收款方账户名称:英大长安保险经纪有限公司\n收款方账户号:241763407966128（此码动态生成，每笔交易唯一，请正确填写至收款方账户号）\n收款方开户银行:易宝支付-备付金账户 或 支付机构备付金集中存管账户\n省市/地区:北京市-北京市\n开户网点:易宝支付-备付金账户\n联行号:991100000074（转账时银行如无此要求可忽略）\n转账金额: 140元', NULL, '2024-06-24', 140.00, 140.00, '已核，情况属实。', 13, '同意', 11, 7, '同意', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2024-06-24', '2024-06-25', '2024-06-25', NULL, NULL, NULL);
INSERT INTO `cmc_borrow` VALUES ('1648881418864281219', NULL, '1', '四川省市政市容协会会费2023及2024年会费', 52, 109, '以下为四川省市政市容协会银行账户信息：\n开户行：四川省市政市容协会\n账号：511 6090 1701 8000 576 189\n开户银行：交通银行成都南二环路支行\n联系人：唐小蓉 18081090971\n备注  ：2023.2024年会费！', NULL, '2024-05-21', 6000.00, 6000.00, '情况属实。', 46, '同意。', 9, 7, '同意', NULL, NULL, NULL, NULL, 28, NULL, NULL, '2024-05-22', '2024-05-23', '2024-05-23', NULL, NULL, '2024-05-30');
-- INSERT INTO `cmc_borrow` VALUES ('1648881418864261220', '1648881410631270469', '0', NULL, 59, 110, NULL, NULL, '2024-07-09', 31875.00, 31875.00, '同意。', 59, '该费用为投标代理费及场地费用，同意借款', 11, 7, '同意', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2024-07-09', '2024-07-09', '2024-07-09', NULL, NULL, NULL);
-- INSERT INTO `cmc_borrow` VALUES ('1648881418864261221', '1648881410631270469', '0', NULL, 32, 107, '其他成本为空域批文费用；\n外业工期按30天计划，前期进场4*30人，后期增派2*15人。', NULL, '2024-07-10', 66950.00, 66950.00, '同意', 32, '同意借款', 11, 7, '同意借款', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '2024-07-10', '2024-07-10', '2024-07-10', NULL, NULL, '2024-07-12');

-- ----------------------------
-- 51、cmc借款明细表
-- ----------------------------
drop table if exists `cmc_borrow_detail`;
create table `cmc_borrow_detail`  (
  `borrow_detail_id`	bigint not null  auto_increment comment '借款明细id',
  `borrow_id` 			char(19)  		default null comment '借款id',
  `borrow_item` 		varchar(50)  	default null comment '开支项',
  `unit` 				varchar(10)  	default null comment '单位',
  `price` 				decimal(10, 2) 	default null comment '单价',
  `quantity` 			int 			default null comment '数量',
  `apply_amount` 		decimal(10, 2) 	default null comment '申请金额',
  `manager_amount` 		decimal(10, 2) 	default null comment '分管审核金额',
  primary key (`borrow_detail_id`)
) engine = innodb comment = 'cmc借款明细表';

-- ----------------------------
-- 初始化-借款明细表数据
-- ----------------------------
INSERT INTO `cmc_borrow_detail` VALUES (1, '1648881418864281219', '学会、协会会费', NULL, 3000.00, 2, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2, '1648881418864271218', '投标保证金保险费', '元', 140.00, 1, 140.00, 140.00);
INSERT INTO `cmc_borrow_detail` VALUES (3, '1648881418864261217', '住宿成本', '人.天', 60.00, 166, 9960.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (4, '1648881418864261217', '用餐成本', '人.天', 70.00, 166, 11620.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (5, '1648881418864261217', '车辆加油费', '项', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (6, '1648881418864261217', '水准民工保险费', '项', 630.00, 1, 630.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (7, '1648881418864261217', '水准民工', '人.天', 240.00, 26, 6240.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (8, '1648881418864251216', '车辆燃油费', '项', 1.00, 6000, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (9, '1648881418864251216', '住宿成本', '间', 180.00, 55, 9900.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (10, '1648881418864251216', '用餐成本', '人.天', 100.00, 100, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (11, '1648881418864251216', '民工意外伤害险', '项', 1.00, 1500, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (12, '1648881418864251216', '民工费', '人.天', 200.00, 10, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (13, '1648881418864251216', '现场零星辅助材料', '项', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (14, '1648881418864251216', '往返交通费', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (15, '1648881418864241215', '资料费用', '幅', 1500.00, 21, 31500.00, 31500.00);
INSERT INTO `cmc_borrow_detail` VALUES (16, '1648881418864231214', '专利年费', '1', 3450.00, 1, 3450.00, 3450.00);
INSERT INTO `cmc_borrow_detail` VALUES (17, '1648881418864221213', '用餐成本', '天/元', 3000.00, 30, 90000.00, 40000.00);
INSERT INTO `cmc_borrow_detail` VALUES (18, '1648881418864221213', '住宿成本', '人.天', 120.00, 120, 14400.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (19, '1648881418864221213', '车辆加油费', '天/元', 150.00, 10, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (20, '1648881418864221213', '短期租车', '天/元', 700.00, 10, 7000.00, 7000.00);
INSERT INTO `cmc_borrow_detail` VALUES (21, '1648881418864221213', '机票（4人）', '人/次', 1800.00, 8, 14400.00, 7500.00);
INSERT INTO `cmc_borrow_detail` VALUES (22, '1648881418864211212', '投标备用金', '项目', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (23, '1648881418864201211', '标书购买费', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (24, '1648881418864191210', '中标服务费', '元', 5009.00, 1, 5009.00, 5009.00);
INSERT INTO `cmc_borrow_detail` VALUES (25, '1648881418864181209', '用餐成本', '项', 939.00, 1, 939.00, 939.00);
INSERT INTO `cmc_borrow_detail` VALUES (26, '1648881418864181209', '住宿成本', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (27, '1648881418864181209', '车辆加油费', '项', 762.27, 1, 762.30, 762.30);
INSERT INTO `cmc_borrow_detail` VALUES (28, '1648881418864171208', '车辆加油费', '月', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (29, '1648881418864171208', '用餐成本', '人/天', 50.00, 120, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (30, '1648881418864171208', '项目水电气', '月', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (31, '1648881418864171208', '用工成本（16人）', '次', 55531.00, 1, 55531.00, 55531.00);
INSERT INTO `cmc_borrow_detail` VALUES (32, '1648881418864171208', '22年12月实习生工资补发', '次', 30000.00, 1, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (33, '1648881418864161207', '直孔电站水位尺安装费用', '元', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (34, '1648881418864161207', '查龙电站日常监测', '元', 5920.00, 1, 5920.00, 5920.00);
INSERT INTO `cmc_borrow_detail` VALUES (35, '1648881418864161207', '羊湖电站取水口场地平整及清淤', '元', 22560.00, 1, 22560.00, 22560.00);
INSERT INTO `cmc_borrow_detail` VALUES (36, '1648881418864151206', '投标保证金保险费', '元', 420.00, 1, 420.00, 420.00);
INSERT INTO `cmc_borrow_detail` VALUES (37, '1648881418864141205', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (38, '1648881418864141205', '二滩大坝水准月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (39, '1648881418864141205', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (40, '1648881418864141205', 'GNSS自动化设备维护', '人天', 120.00, 4, 480.00, 480.00);
INSERT INTO `cmc_borrow_detail` VALUES (41, '1648881418864141205', '车辆燃油及维修费', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (42, '1648881418864141205', '交通费用', '人次', 191.00, 8, 1528.00, 1528.00);
INSERT INTO `cmc_borrow_detail` VALUES (43, '1648881418864141205', '现场人员生活开支', '人天', 40.00, 120, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (44, '1648881418864131204', '资料费用', '幅', 1500.00, 3, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (45, '1648881418864121203', '担保费', '年', 200000.00, 1, 200000.00, 200000.00);
INSERT INTO `cmc_borrow_detail` VALUES (46, '1648881418864111202', '用餐成本', '人.天', 100.00, 40, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (47, '1648881418864111202', '住宿成本', '人.天', 100.00, 40, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (48, '1648881418864111202', '车辆加油费', '天.元', 200.00, 10, 2000.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (49, '1648881418864111202', '药品及劳保', '项', 200.00, 1, 200.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (50, '1648881418864111202', '用工成本', '人.天', 360.00, 12, 4320.00, 4320.00);
INSERT INTO `cmc_borrow_detail` VALUES (51, '1648881418864111202', '民工意外险', '项', 800.00, 1, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (52, '1648881418864101201', '3月15日~5月20日现场开支', '项', 11711.00, 1, 11711.00, 11711.00);
INSERT INTO `cmc_borrow_detail` VALUES (53, '1648881418864101201', '机票', '项', 1800.00, 3, 5400.00, 5400.00);
INSERT INTO `cmc_borrow_detail` VALUES (54, '1648881418864101201', '用餐成本', '人天', 80.00, 120, 9600.00, 9600.00);
INSERT INTO `cmc_borrow_detail` VALUES (55, '1648881418864101201', '临时交通费用', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (56, '1648881418864101201', '临时住宿费用', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (57, '1648881418864091200', '审查成本', NULL, 45000.00, 1, 45000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (58, '1648881418864081199', '生活成本支出（含宴请）', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (59, '1648881418864081199', '车辆保养费、燃油费', '项', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (60, '1648881418864081199', '人员进出场交通费', '项', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (61, '1648881418864081199', '水准测量（民工费）', '人工', 220.00, 40, 8800.00, 8800.00);
INSERT INTO `cmc_borrow_detail` VALUES (62, '1648881418864081199', '司南厂家现场安装调试费', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (63, '1648881418864081199', '光纤熔接、网络调试费', '项', 4800.00, 1, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (64, '1648881418864081199', '电缆电源牵引、布管埋线', '人工', 350.00, 20, 7000.00, 7000.00);
INSERT INTO `cmc_borrow_detail` VALUES (65, '1648881418864081199', '光纤收发器、ODF支架采购', '项', 2200.00, 1, 2200.00, 2200.00);
INSERT INTO `cmc_borrow_detail` VALUES (66, '1648881418864081199', '防雷接地施工费', '人工', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (67, '1648881418864081199', '新增机柜（业主增补变更）', '个', 1000.00, 2, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (68, '1648881418864071198', '用餐成本', '人/天', 80.00, 74, 5920.00, 5920.00);
INSERT INTO `cmc_borrow_detail` VALUES (69, '1648881418864071198', '住宿成本', '人/天', 110.00, 72, 7920.00, 7920.00);
INSERT INTO `cmc_borrow_detail` VALUES (70, '1648881418864071198', '车辆加油费', '项', 6000.00, 1, 6000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (71, '1648881418864071198', '进场机票', '人/次', 1000.00, 2, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (72, '1648881418864061197', '资料费用', '幅', 1500.00, 38, 57000.00, 57000.00);
INSERT INTO `cmc_borrow_detail` VALUES (73, '1648881418864051196', '人员进出场', '元', 4000.00, 2, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (74, '1648881418864051196', '设备进场场', '元', 2000.00, 2, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (75, '1648881418864051196', '生活费用', '元', 90.00, 120, 10800.00, 10800.00);
INSERT INTO `cmc_borrow_detail` VALUES (76, '1648881418864051196', '住宿成本', '元', 150.00, 120, 18000.00, 18000.00);
INSERT INTO `cmc_borrow_detail` VALUES (77, '1648881418864051196', '现场租车', '元', 600.00, 60, 36000.00, 36000.00);
INSERT INTO `cmc_borrow_detail` VALUES (78, '1648881418864051196', '民工成本', '元', 220.00, 240, 52800.00, 52800.00);
INSERT INTO `cmc_borrow_detail` VALUES (79, '1648881418864051196', '民工保险费', '元', 300.00, 5, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (80, '1648881418864051196', '土建材料及施工', '元', 7900.00, 1, 7900.00, 7900.00);
INSERT INTO `cmc_borrow_detail` VALUES (81, '1648881418864041195', '资料费用', '幅', 1500.00, 6, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (82, '1648881418864031194', '中标服务费', '项', 17103.00, 1, 17103.00, 17103.00);
INSERT INTO `cmc_borrow_detail` VALUES (83, '1648881418864021193', 'SCCORS中心正常计算费用', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (84, '1648881418864021193', '住宿成本', '人天', 450.00, 12, 5400.00, 5400.00);
INSERT INTO `cmc_borrow_detail` VALUES (85, '1648881418864021193', '用餐成本', '人天', 500.00, 12, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (86, '1648881418864021193', '车辆加油费', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (87, '1648881418864021193', '交通成本', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (88, '1648881418864011192', '住宿成本', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (89, '1648881418864011192', '生活成本', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (90, '1648881418864011192', '车辆燃油及保养、维修费', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (91, '1648881418864011192', '项目部人员进出场交通费', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (92, '1648881418864011192', '光纤电缆穿管混凝土铺设', '人工', 220.00, 40, 8800.00, 8800.00);
INSERT INTO `cmc_borrow_detail` VALUES (93, '1648881418864011192', '倒垂浮筒变压油采购', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (94, '1648881418864001191', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (95, '1648881418864001191', '二滩大坝水准月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (96, '1648881418864001191', '二滩大坝平面季度观测民工费', '人天', 120.00, 40, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (97, '1648881418864001191', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (98, '1648881418864001191', '车辆燃油及维修费', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (99, '1648881418864001191', '交通费用', '人次', 191.00, 6, 1146.00, 1146.00);
INSERT INTO `cmc_borrow_detail` VALUES (100, '1648881418864001191', '购买安全帽', '顶', 20.00, 60, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (101, '1648881418864001191', '现场人员生活开支', '人天', 40.00, 120, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (102, '1648881418863991190', '住宿成本', '人天', 100.00, 14, 1400.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (103, '1648881418863991190', '用餐成本', '人天', 120.00, 21, 2100.00, 2100.00);
INSERT INTO `cmc_borrow_detail` VALUES (104, '1648881418863991190', '车辆加油费', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (105, '1648881418863981189', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (106, '1648881418863981189', '二滩大坝月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (107, '1648881418863981189', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (108, '1648881418863981189', 'GNSS自动化设备维护', '人天', 120.00, 4, 480.00, 480.00);
INSERT INTO `cmc_borrow_detail` VALUES (109, '1648881418863981189', '车辆燃油及维修费', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (110, '1648881418863981189', '交通费用', '人次', 191.00, 10, 1910.00, 1910.00);
INSERT INTO `cmc_borrow_detail` VALUES (111, '1648881418863981189', '现场人员生活开支', '人天', 40.00, 72, 2880.00, 2880.00);
INSERT INTO `cmc_borrow_detail` VALUES (112, '1648881418863971188', '用餐成本', '项', 858.00, 1, 858.00, 858.00);
INSERT INTO `cmc_borrow_detail` VALUES (113, '1648881418863971188', '住宿成本', '项', 650.00, 1, 650.00, 650.00);
INSERT INTO `cmc_borrow_detail` VALUES (114, '1648881418863971188', '千寻CORS及生产用品', '项', 48.00, 1, 48.00, 48.00);
INSERT INTO `cmc_borrow_detail` VALUES (115, '1648881418863971188', '燃油费', '项', 315.00, 1, 315.00, 315.00);
INSERT INTO `cmc_borrow_detail` VALUES (116, '1648881418863961187', '项目垫支', '元', NULL, 1, 36594.00, 36594.00);
INSERT INTO `cmc_borrow_detail` VALUES (117, '1648881418863951186', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (118, '1648881418863951186', '二滩大坝水准月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (119, '1648881418863951186', '二滩大坝平面季度观测民工费', '人天', 120.00, 40, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (120, '1648881418863951186', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (121, '1648881418863951186', '车辆燃油及维修费', '项', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (122, '1648881418863951186', '交通费用', '人次', 191.00, 8, 1528.00, 1528.00);
INSERT INTO `cmc_borrow_detail` VALUES (123, '1648881418863951186', '安全投入', '项', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (124, '1648881418863951186', '现场人员生活开支', '人天', 40.00, 120, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (125, '1648881418863941185', '中标服务费', '元', 13493.89, 1, 13493.90, 13493.90);
INSERT INTO `cmc_borrow_detail` VALUES (126, '1648881418863931184', '培训费', NULL, NULL, NULL, 200.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (127, '1648881418863921183', '人员成本', '元', NULL, NULL, 56786.00, 56786.00);
INSERT INTO `cmc_borrow_detail` VALUES (128, '1648881418863921183', '住宿成本', '元', 8000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (129, '1648881418863921183', '租房', '季度', 8402.00, 1, 8402.00, 8402.00);
INSERT INTO `cmc_borrow_detail` VALUES (130, '1648881418863921183', '交通成本', '人/次', 111.00, 16, 1776.00, 1776.00);
INSERT INTO `cmc_borrow_detail` VALUES (131, '1648881418863911182', '接待物资购置', NULL, NULL, NULL, 76000.00, 76000.00);
INSERT INTO `cmc_borrow_detail` VALUES (132, '1648881418863901181', '住宿成本', '元', 100.00, 24, 2400.00, 1920.00);
INSERT INTO `cmc_borrow_detail` VALUES (133, '1648881418863901181', '用餐成本', '元', 100.00, 24, 2400.00, 1920.00);
INSERT INTO `cmc_borrow_detail` VALUES (134, '1648881418863901181', '车辆加油费', '元', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (135, '1648881418863901181', '坐标转换费用', '元', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (136, '1648881418863891180', '住宿成本', '人天', 100.00, 30, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (137, '1648881418863891180', '用餐成本', '人天', 120.00, 30, 3600.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (138, '1648881418863891180', '车辆加油费', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (139, '1648881418863891180', '静态数据解算及正常高转换费用', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (140, '1648881418863881179', '住宿成本', '间', NULL, NULL, 5120.00, 5120.00);
INSERT INTO `cmc_borrow_detail` VALUES (141, '1648881418863881179', '用餐成本', '人天', NULL, NULL, 1600.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (142, '1648881418863881179', '车辆加油费', '项', 1732.00, 1, 1732.00, 1732.00);
INSERT INTO `cmc_borrow_detail` VALUES (143, '1648881418863871178', '大坝内观系统-光端机采购', '个', 1300.00, 57, 74100.00, 74100.00);
INSERT INTO `cmc_borrow_detail` VALUES (144, '1648881418863871178', '项目部生活费用', '项', 8000.00, 1, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (145, '1648881418863871178', '车辆修理费、燃油费', '项', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (146, '1648881418863871178', '项目部人员进出场交通费', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (147, '1648881418863871178', '土建物资、五金设备采购', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (148, '1648881418863861177', '用餐成本', '人天', 100.00, 32, 3200.00, 2560.00);
INSERT INTO `cmc_borrow_detail` VALUES (149, '1648881418863861177', '住宿成本', '人天', 80.00, 32, 2560.00, 2560.00);
INSERT INTO `cmc_borrow_detail` VALUES (150, '1648881418863861177', '交通成本', '项', 1200.00, 1, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (151, '1648881418863851176', '中标服务费', '元', 6750.00, 1, 6750.00, 6750.00);
INSERT INTO `cmc_borrow_detail` VALUES (152, '1648881418863841175', '交通成本', '项', 50000.00, 1, 50000.00, 50000.00);
INSERT INTO `cmc_borrow_detail` VALUES (153, '1648881418863831174', '保险费', '1', NULL, 1, 1180.00, 1180.00);
INSERT INTO `cmc_borrow_detail` VALUES (154, '1648881418863821173', '资料费用', '幅', 1500.00, 13, 19500.00, 19500.00);
INSERT INTO `cmc_borrow_detail` VALUES (155, '1648881418863811172', '住宿成本', '人天', 60.00, 14, 840.00, 840.00);
INSERT INTO `cmc_borrow_detail` VALUES (156, '1648881418863811172', '用餐成本', '人天', 80.00, 14, 1120.00, 1120.00);
INSERT INTO `cmc_borrow_detail` VALUES (157, '1648881418863811172', '车辆加油费', '项', 1800.00, 1, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (158, '1648881418863811172', '坐标转换', '项', 300.00, 1, 300.00, 300.00);
INSERT INTO `cmc_borrow_detail` VALUES (159, '1648881418863801171', '保险费', '元', 280.00, 1, 280.00, 280.00);
INSERT INTO `cmc_borrow_detail` VALUES (160, '1648881418863791170', '机票', '人/元', 2400.00, 2, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (161, '1648881418863791170', '用餐成本', '人/天', 80.00, 24, 1920.00, 1920.00);
INSERT INTO `cmc_borrow_detail` VALUES (162, '1648881418863791170', '住宿成本', '人/天', 60.00, 14, 840.00, 840.00);
INSERT INTO `cmc_borrow_detail` VALUES (163, '1648881418863791170', '租车', '天/元', 650.00, 7, 4550.00, 4550.00);
INSERT INTO `cmc_borrow_detail` VALUES (164, '1648881418863791170', '车辆加油费及过路费', '天/元', 260.00, 7, 1820.00, 1820.00);
INSERT INTO `cmc_borrow_detail` VALUES (165, '1648881418863791170', '高程转换', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (166, '1648881418863781169', '人员进出场', '元/人', 4000.00, 2, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (167, '1648881418863781169', '生活费用', '元/人', 90.00, 180, 16200.00, 16200.00);
INSERT INTO `cmc_borrow_detail` VALUES (168, '1648881418863781169', '住宿成本', '元/人', 150.00, 180, 27000.00, 27000.00);
INSERT INTO `cmc_borrow_detail` VALUES (169, '1648881418863781169', '现场租车', '元/月', 3000.00, 3, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (170, '1648881418863781169', '民工成本', '元/人', 220.00, 60, 13200.00, 13200.00);
INSERT INTO `cmc_borrow_detail` VALUES (171, '1648881418863781169', '劳动及防护用品', '元', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (172, '1648881418863771168', '住宿成本', '人天', 60.00, 320, 19200.00, 19200.00);
INSERT INTO `cmc_borrow_detail` VALUES (173, '1648881418863771168', '用餐成本', '人天', 100.00, 320, 32000.00, 32000.00);
INSERT INTO `cmc_borrow_detail` VALUES (174, '1648881418863771168', '交通成本', '辆天', 120.00, 80, 9600.00, 9600.00);
INSERT INTO `cmc_borrow_detail` VALUES (175, '1648881418863771168', '土建材料费', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (176, '1648881418863771168', '指示牌制作', '个', 90.00, 100, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (177, '1648881418863771168', '民工费', '人天', 230.00, 229, 52670.00, 52670.00);
INSERT INTO `cmc_borrow_detail` VALUES (178, '1648881418863771168', '民工保险', '项', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (179, '1648881418863771168', '机动船租金', '天', 1200.00, 50, 60000.00, 60000.00);
INSERT INTO `cmc_borrow_detail` VALUES (180, '1648881418863771168', '机动船运费', '项', 15000.00, 1, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (181, '1648881418863771168', '已发生成本补充借款', '项', 10934.00, 1, 10934.00, 10934.00);
INSERT INTO `cmc_borrow_detail` VALUES (182, '1648881418863761167', '其它成本', NULL, NULL, NULL, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (183, '1648881418863751166', '培训费', '1', 17100.00, 1, 17100.00, 17100.00);
INSERT INTO `cmc_borrow_detail` VALUES (184, '1648881418863741165', '用餐成本', '项', 695.00, 1, 695.00, 695.00);
INSERT INTO `cmc_borrow_detail` VALUES (185, '1648881418863741165', '住宿成本', '项', 300.00, 1, 300.00, 300.00);
INSERT INTO `cmc_borrow_detail` VALUES (186, '1648881418863741165', '千寻CORS及生产用品', '项', 71.00, 1, 71.00, 71.00);
INSERT INTO `cmc_borrow_detail` VALUES (187, '1648881418863741165', '燃油费', '项', 430.00, 1, 430.00, 430.00);
INSERT INTO `cmc_borrow_detail` VALUES (188, '1648881418863731164', '其它成本', '次', 130000.00, 1, 130000.00, 130000.00);
INSERT INTO `cmc_borrow_detail` VALUES (189, '1648881418863721163', '机票', '项', 4455.00, 1, 4455.00, 4455.00);
INSERT INTO `cmc_borrow_detail` VALUES (190, '1648881418863721163', '坐标转换费用', '项', 2400.00, 1, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (191, '1648881418863721163', '车辆加油费', '项', 805.00, 1, 805.00, 805.00);
INSERT INTO `cmc_borrow_detail` VALUES (192, '1648881418863711162', '资料费用', '幅', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (193, '1648881418863701161', '住宿成本', '天', 290.00, 41, 11890.00, 11890.00);
INSERT INTO `cmc_borrow_detail` VALUES (194, '1648881418863701161', '交通成本', '天', 450.00, 27, 12150.00, 12150.00);
INSERT INTO `cmc_borrow_detail` VALUES (195, '1648881418863701161', '用工成本', '天', 230.00, 85, 19550.00, 19550.00);
INSERT INTO `cmc_borrow_detail` VALUES (196, '1648881418863701161', '培训费', '往返', 3200.00, 1, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (197, '1648881418863701161', '耗材成本', '批', 3200.00, 1, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (198, '1648881418863691160', '生活成本支出', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (199, '1648881418863691160', '车辆燃油及保养、维修费', '项', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (200, '1648881418863691160', '项目部人员进出场交通费', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (201, '1648881418863691160', '零星辅助材料采购', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (202, '1648881418863691160', '民工费', '人工', 220.00, 18, 3960.00, 3960.00);
INSERT INTO `cmc_borrow_detail` VALUES (203, '1648881418863681159', '用餐成本', '人天', 80.00, 90, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (204, '1648881418863681159', '住宿成本', '人天', 80.00, 90, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (205, '1648881418863681159', '车辆成本', '项', 5000.00, 1, 5000.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (206, '1648881418863671158', '资料费用', '幅', 1500.00, 5, 7500.00, 7500.00);
INSERT INTO `cmc_borrow_detail` VALUES (207, '1648881418863661157', '用餐成本', '元/人天', 80.00, 75, 6000.00, 4320.00);
INSERT INTO `cmc_borrow_detail` VALUES (208, '1648881418863661157', '住宿成本', '元/人天', 80.00, 72, 5760.00, 4320.00);
INSERT INTO `cmc_borrow_detail` VALUES (209, '1648881418863661157', '车辆加油费', '项', 4600.00, 1, 4600.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (210, '1648881418863661157', '坐标转换', '元/点', 40.00, 122, 4880.00, 4880.00);
INSERT INTO `cmc_borrow_detail` VALUES (211, '1648881418863651156', '车辆加油费', '元', 500.00, 3, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (212, '1648881418863651156', '住宿', '元', 150.00, 18, 2700.00, 2700.00);
INSERT INTO `cmc_borrow_detail` VALUES (213, '1648881418863651156', '用餐', '元', 100.00, 40, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (214, '1648881418863651156', '测绘局坐标转换费用', '元', 1.00, 500, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (215, '1648881418863641155', '机票', '1', 5275.00, 1, 5275.00, 5275.00);
INSERT INTO `cmc_borrow_detail` VALUES (216, '1648881418863641155', '用餐成本', '1', 3801.00, 1, 3801.00, 3801.00);
INSERT INTO `cmc_borrow_detail` VALUES (217, '1648881418863641155', '住宿成本', '1', 4130.00, 1, 4130.00, 4130.00);
INSERT INTO `cmc_borrow_detail` VALUES (218, '1648881418863641155', '其他', '1', 1245.00, 1, 1245.00, 1245.00);
INSERT INTO `cmc_borrow_detail` VALUES (219, '1648881418863631154', '用餐成本', '项', 691.00, 1, 691.00, 691.00);
INSERT INTO `cmc_borrow_detail` VALUES (220, '1648881418863631154', '住宿成本', '项', 486.00, 1, 486.00, 486.00);
INSERT INTO `cmc_borrow_detail` VALUES (221, '1648881418863631154', '车辆加油费', '项', 441.00, 1, 441.00, 441.00);
INSERT INTO `cmc_borrow_detail` VALUES (222, '1648881418863631154', '其它成本（CORS账号、工具等）', '项', 80.00, 1, 80.00, 80.00);
INSERT INTO `cmc_borrow_detail` VALUES (223, '1648881418863621153', '接待费用', NULL, NULL, NULL, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (224, '1648881418863611152', '生活成本支出（含宴请）', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (225, '1648881418863611152', '车辆保养费、燃油费', '项', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (226, '1648881418863611152', '人员进出场交通费', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (227, '1648881418863611152', '临时用工民工费', '项', 220.00, 30, 6600.00, 6600.00);
INSERT INTO `cmc_borrow_detail` VALUES (228, '1648881418863611152', '设备安装辅材采购', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (229, '1648881418863611152', '新员工试用期补贴（魏琪豪）', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (230, '1648881418863601151', '项目食宿、加油费用', '项', 5225.00, 1, 5225.00, 5255.00);
INSERT INTO `cmc_borrow_detail` VALUES (231, '1648881418863591150', '用餐成本', '人.天', 90.00, 80, 7200.00, 6400.00);
INSERT INTO `cmc_borrow_detail` VALUES (232, '1648881418863591150', '住宿成本', '人.天', 90.00, 80, 7200.00, 5600.00);
INSERT INTO `cmc_borrow_detail` VALUES (233, '1648881418863591150', '车辆加油费', '项', 5400.00, 1, 5400.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (234, '1648881418863591150', '埋石工具、油漆、木桩等', '项', 200.00, 1, 200.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (235, '1648881418863581149', '住宿成本', '项', 1200.00, 1, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (236, '1648881418863581149', '用餐成本', '项', 1438.00, 1, 1438.00, 1438.00);
INSERT INTO `cmc_borrow_detail` VALUES (237, '1648881418863571148', '标书购买费', '元', 800.00, 1, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (238, '1648881418863561147', '其它成本', '项', 30000.00, 1, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (239, '1648881418863551146', '项目补充借款', '项', 3717.24, 1, 3717.20, 3717.20);
INSERT INTO `cmc_borrow_detail` VALUES (240, '1648881418863541145', '车辆加油费', '天', 200.00, 10, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (241, '1648881418863541145', '住宿成本', '人天', 60.00, 30, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (242, '1648881418863541145', '用餐成本', '人天', 80.00, 30, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (243, '1648881418863531144', '担保费', '次', 800.00, 1, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (244, '1648881418863521143', '中标服务费', '元', 60557.00, 1, 60557.00, 60557.00);
INSERT INTO `cmc_borrow_detail` VALUES (245, '1648881418863511142', '项目开支', '项', 2439.40, 1, 2439.40, 2439.40);
INSERT INTO `cmc_borrow_detail` VALUES (246, '1648881418863501141', '保险费', '元', 472.50, 1, 472.50, 472.50);
INSERT INTO `cmc_borrow_detail` VALUES (247, '1648881418863491140', '草堂慈善捐赠', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (248, '1648881418863481139', '其他费用', '项', 80000.00, 1, 80000.00, 80000.00);
INSERT INTO `cmc_borrow_detail` VALUES (249, '1648881418863471138', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (250, '1648881418863471138', '二滩大坝月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (251, '1648881418863471138', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (252, '1648881418863471138', '车辆费用', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (253, '1648881418863471138', '进出场交通费用', '人次', 194.00, 8, 1552.00, 1552.00);
INSERT INTO `cmc_borrow_detail` VALUES (254, '1648881418863471138', '现场人员生活开支', '人天', 40.00, 120, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (255, '1648881418863471138', '2024年民工保险费用', '人', 800.00, 11, 8800.00, 8800.00);
INSERT INTO `cmc_borrow_detail` VALUES (256, '1648881418863471138', '2024年民工体检费用', '人', 200.00, 14, 2800.00, 2800.00);
INSERT INTO `cmc_borrow_detail` VALUES (257, '1648881418863461137', '第三方平台信息费', NULL, NULL, NULL, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (258, '1648881418863451136', '展位费用', '个', 8000.00, 1, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (259, '1648881418863441135', '用餐成本', '天', 60.00, 30, 1800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (260, '1648881418863441135', '交通成本', '元', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (261, '1648881418863441135', '住宿成本', '元', 150.00, 30, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (262, '1648881418863441135', '其它成本', '元', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (263, '1648881418863431134', '中标服务费', '项', 17352.00, 1, 17352.00, 17352.00);
INSERT INTO `cmc_borrow_detail` VALUES (264, '1648881418863421133', '标书购买费', '元', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (265, '1648881418863411132', '学会、协会会费', NULL, 30000.00, 1, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (266, '1648881418863401131', '标书购买费', '1', 300.00, 1, 300.00, 300.00);
INSERT INTO `cmc_borrow_detail` VALUES (267, '1648881418863391130', '资料费用', '幅', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (268, '1648881418863381129', '资料费用', '幅', 1500.00, 29, 43500.00, 43500.00);
INSERT INTO `cmc_borrow_detail` VALUES (269, '1648881418863371128', '学会、协会会费', '1', 13000.00, 1, 13000.00, 13000.00);
INSERT INTO `cmc_borrow_detail` VALUES (270, '1648881418863361127', NULL, NULL, NULL, NULL, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (271, '1648881418863351126', '审查成本', NULL, 14000.00, 1, 14000.00, 14000.00);
INSERT INTO `cmc_borrow_detail` VALUES (272, '1648881418863341125', '车辆加油费', '项', 627.00, 1, 627.00, 627.00);
INSERT INTO `cmc_borrow_detail` VALUES (273, '1648881418863341125', '用餐成本', '项', 100.00, 1, 100.00, 100.00);
INSERT INTO `cmc_borrow_detail` VALUES (274, '1648881418863331124', '住宿成本', '人/天', 150.00, 15, 2250.00, 2250.00);
INSERT INTO `cmc_borrow_detail` VALUES (275, '1648881418863331124', '车辆加油费', '项', 4000.00, 1, 4000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (276, '1648881418863331124', '现场生活开支', '人/天', 150.00, 15, 2250.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (277, '1648881418863331124', '用工成本', '项', 400.00, 10, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (278, '1648881418863331124', '耗材成本', '项', 200.00, 1, 200.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (279, '1648881418863331124', '交通成本（含机票）', '元', 4000.00, 2, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (280, '1648881418863331124', '租车', '天', 260.00, 15, 3900.00, 3900.00);
INSERT INTO `cmc_borrow_detail` VALUES (281, '1648881418863321123', '车辆加油费', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (282, '1648881418863321123', '住宿成本', '人天', 200.00, 15, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (283, '1648881418863321123', '用餐成本', '人天', 200.00, 15, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (284, '1648881418863311122', '车辆加油费', '月', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (285, '1648881418863311122', '用餐成本', '天', 200.00, 30, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (286, '1648881418863311122', '项目水电气费用', '月', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (287, '1648881418863311122', '用工成本', '人', 1.00, 16, 42482.00, 42482.00);
INSERT INTO `cmc_borrow_detail` VALUES (288, '1648881418863301121', '资料费用', '幅', 1500.00, 12, 18000.00, 18000.00);
INSERT INTO `cmc_borrow_detail` VALUES (289, '1648881418863291120', '油费', '元', 500.00, 3, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (290, '1648881418863291120', '住宿', '元', 150.00, 10, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (291, '1648881418863291120', '用餐', '元', 100.00, 18, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (292, '1648881418863291120', '测绘局坐标转换费用', '元', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (293, '1648881418863281119', '标书购买费', '元', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (294, '1648881418863271118', '培训费', NULL, 980.00, 2, 1960.00, 1960.00);
INSERT INTO `cmc_borrow_detail` VALUES (295, '1648881418863261117', '用餐成本', '人天', 60.00, 50, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (296, '1648881418863261117', '住宿成本', '人天', 60.00, 50, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (297, '1648881418863261117', '租皮卡车', '天元', 600.00, 7, 4200.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (298, '1648881418863261117', '油费', '天元', 220.00, 10, 2200.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (299, '1648881418863261117', '用工成本', '人天', 300.00, 14, 4200.00, 4200.00);
INSERT INTO `cmc_borrow_detail` VALUES (300, '1648881418863261117', '水位牌（小）制作', '个/元', 600.00, 40, 24000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (301, '1648881418863261117', '水位牌（大）制作', '个/元', 1000.00, 10, 10000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (302, '1648881418863261117', '水泥河沙等费用', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (303, '1648881418863251116', '住宿成本', '人.天', 80.00, 40, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (304, '1648881418863251116', '用餐成本', '人.天', 80.00, 40, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (305, '1648881418863251116', '车辆加油费', '项', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (306, '1648881418863251116', '现场租用车辆', '元.天', 600.00, 10, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (307, '1648881418863251116', '1人进场机票', '项', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (308, '1648881418863251116', '3人撤场机票', '项', 4500.00, 1, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (309, '1648881418863251116', '配合勘察中心测量费用', '项', 5449.78, 1, 5449.80, 5449.80);
INSERT INTO `cmc_borrow_detail` VALUES (310, '1648881418863251116', '买千寻账号', '元.天', 36.00, 8, 288.00, 288.00);
INSERT INTO `cmc_borrow_detail` VALUES (311, '1648881418863241115', '车辆加油费', '月', 2000.00, 2, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (312, '1648881418863241115', '用餐成本', '天', 45.00, 200, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (313, '1648881418863241115', '房租', '年', 12000.00, 1, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (314, '1648881418863241115', '项目水电气费用物管', '月', 1000.00, 2, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (315, '1648881418863241115', '用工成本', '人', 12.00, 1, 28039.00, 28000.00);
INSERT INTO `cmc_borrow_detail` VALUES (316, '1648881418863241115', '打印费用', '月', 400.00, 2, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (317, '1648881418863231114', 'GNSS解算', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (318, '1648881418863231114', '一等水准计算', '项', 4810.00, 1, 4810.00, 4810.00);
INSERT INTO `cmc_borrow_detail` VALUES (319, '1648881418863231114', '二等水准计算', '项', 4810.00, 1, 4810.00, 4810.00);
INSERT INTO `cmc_borrow_detail` VALUES (320, '1648881418863221113', '住宿成本', '人.天', 80.00, 124, 9920.00, 7440.00);
INSERT INTO `cmc_borrow_detail` VALUES (321, '1648881418863221113', '用餐成本', '人.天', 80.00, 124, 9920.00, 9920.00);
INSERT INTO `cmc_borrow_detail` VALUES (322, '1648881418863221113', '车辆加油费', '项', 1.00, 4500, 4500.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (323, '1648881418863221113', '现场租用车辆（皮卡）', '元.天', 650.00, 24, 15600.00, 13000.00);
INSERT INTO `cmc_borrow_detail` VALUES (324, '1648881418863221113', '现场租用车辆（面包车）', '元.天', 500.00, 23, 11500.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (325, '1648881418863221113', '用工成本', '元.天', 300.00, 66, 19800.00, 13200.00);
INSERT INTO `cmc_borrow_detail` VALUES (326, '1648881418863221113', '购买控制点标芯', '项', 1.00, 1000, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (327, '1648881418863221113', '控制点埋设', '项', 1.00, 1300, 1300.00, 1300.00);
INSERT INTO `cmc_borrow_detail` VALUES (328, '1648881418863221113', '快递水准仪及水准尺', '项', 2.00, 800, 1600.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (329, '1648881418863221113', '保险费', '项', 1.00, 630, 630.00, 630.00);
INSERT INTO `cmc_borrow_detail` VALUES (330, '1648881418863211112', '人员成本', '元', 2500.00, 21, 52500.00, 32500.00);
INSERT INTO `cmc_borrow_detail` VALUES (331, '1648881418863211112', '住宿成本', '年', 8000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (332, '1648881418863211112', '租房', '季度', 8402.00, 1, 8402.00, 8402.00);
INSERT INTO `cmc_borrow_detail` VALUES (333, '1648881418863211112', '耗材成本', '件', 135.00, 100, 13500.00, 13500.00);
INSERT INTO `cmc_borrow_detail` VALUES (334, '1648881418863211112', '打印', '张', 0.03, 400000, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (335, '1648881418863211112', '用餐成本', '天', 60.00, 760, 45600.00, 45600.00);
INSERT INTO `cmc_borrow_detail` VALUES (336, '1648881418863211112', '水电', '月', 3.00, 1000, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (337, '1648881418863201111', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (338, '1648881418863201111', '二滩大坝月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (339, '1648881418863201111', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (340, '1648881418863201111', 'GNSS自动化设备维护', '人天', 120.00, 4, 480.00, 480.00);
INSERT INTO `cmc_borrow_detail` VALUES (341, '1648881418863201111', '车辆燃油及维修费', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (342, '1648881418863201111', '交通费用', '人次', 191.00, 8, 1528.00, 1528.00);
INSERT INTO `cmc_borrow_detail` VALUES (343, '1648881418863201111', '现场人员生活开支', '人天', 40.00, 120, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (344, '1648881418863191110', '投标保证金保险费', '元', 133.00, 1, 133.00, 133.00);
INSERT INTO `cmc_borrow_detail` VALUES (345, '1648881418863181109', '用餐成本', '人/天', 100.00, 100, 10000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (346, '1648881418863181109', '住宿成本', '人/天', 100.00, 100, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (347, '1648881418863181109', '租车（含司机）', '元/天', 900.00, 20, 18000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (348, '1648881418863181109', '车辆加油费', '元/天', 150.00, 20, 3000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (349, '1648881418863181109', '用工成本', '人/天', 300.00, 20, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (350, '1648881418863181109', '用工保险', '人/元', 200.00, 5, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (351, '1648881418863181109', '机票', '人/元', 1500.00, 8, 12000.00, 9600.00);
INSERT INTO `cmc_borrow_detail` VALUES (352, '1648881418863181109', '无人船托运费', '项', 3200.00, 1, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (353, '1648881418863171108', '住宿成本', '人天', 80.00, 64, 5120.00, 5120.00);
INSERT INTO `cmc_borrow_detail` VALUES (354, '1648881418863171108', '用餐成本', '人天', 100.00, 64, 6400.00, 5120.00);
INSERT INTO `cmc_borrow_detail` VALUES (355, '1648881418863171108', '车辆加油费', '项', 4500.00, 1, 4500.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (356, '1648881418863171108', 'SCCORS中心正常计算费用', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (357, '1648881418863161107', '用餐成本', '项', 832.00, 1, 832.00, 832.00);
INSERT INTO `cmc_borrow_detail` VALUES (358, '1648881418863161107', '住宿成本', '项', 960.00, 1, 960.00, 960.00);
INSERT INTO `cmc_borrow_detail` VALUES (359, '1648881418863161107', '购买千寻CORS', '项', 36.00, 1, 36.00, 36.00);
INSERT INTO `cmc_borrow_detail` VALUES (360, '1648881418863161107', '燃油费', '项', 768.00, 1, 768.00, 768.00);
INSERT INTO `cmc_borrow_detail` VALUES (361, '1648881418863151106', '资料费用', '幅', 1500.00, 8, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (362, '1648881418863141105', '坐标转换', '项', 12000.00, 1, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (363, '1648881418863131104', '住宿成本', '人天', 100.00, 30, 3000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (364, '1648881418863131104', '用餐成本', '人天', 100.00, 30, 3000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (365, '1648881418863131104', '进出场交通成本', '人次', 1200.00, 4, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (366, '1648881418863131104', '现场交通成本', '天', 100.00, 15, 1500.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (367, '1648881418863121103', '用餐成本', '人.天', 90.00, 56, 5040.00, 5040.00);
INSERT INTO `cmc_borrow_detail` VALUES (368, '1648881418863121103', '住宿成本', '人.天', 90.00, 56, 5040.00, 5040.00);
INSERT INTO `cmc_borrow_detail` VALUES (369, '1648881418863121103', '加油', '天.元', 150.00, 12, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (370, '1648881418863121103', '陕西局高程转换费用', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (371, '1648881418863121103', '租车及加油', '项', 1648.00, 1, 1648.00, 1648.00);
INSERT INTO `cmc_borrow_detail` VALUES (372, '1648881418863121103', '无人船托运费', '项', 430.00, 1, 430.00, 430.00);
INSERT INTO `cmc_borrow_detail` VALUES (373, '1648881418863121103', '驱蛇粉及蛇药', '项', 139.00, 1, 139.00, 139.00);
INSERT INTO `cmc_borrow_detail` VALUES (374, '1648881418863111102', '接待物资购置', NULL, NULL, NULL, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (375, '1648881418863101101', '住宿成本', '人天', 80.00, 102, 8160.00, 8160.00);
INSERT INTO `cmc_borrow_detail` VALUES (376, '1648881418863101101', '用餐成本', '人天', 120.00, 102, 12240.00, 9180.00);
INSERT INTO `cmc_borrow_detail` VALUES (377, '1648881418863101101', '车辆加油费', '项', 7000.00, 1, 7000.00, 7000.00);
INSERT INTO `cmc_borrow_detail` VALUES (378, '1648881418863101101', '坐标转换', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (379, '1648881418863091100', '现场开销垫付', '元', 1071.00, 1, 1071.00, 1071.00);
INSERT INTO `cmc_borrow_detail` VALUES (380, '1648881418863081099', '平台交易费', '1', 10405.80, 1, 10405.80, 10405.80);
INSERT INTO `cmc_borrow_detail` VALUES (381, '1648881418863071098', '已发生成本补充借款', '项', 10967.00, 1, 10967.00, 10976.00);
INSERT INTO `cmc_borrow_detail` VALUES (382, '1648881418863061097', '钻孔及便道用地补偿', '项', 1.00, 15000, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (383, '1648881418863061097', '安全措施费', '项', 1.00, 3000, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (384, '1648881418863061097', '生活及商务', '项', 1.00, 5000, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (385, '1648881418863051096', '住宿成本', '人天', 130.00, 220, 28600.00, 19800.00);
INSERT INTO `cmc_borrow_detail` VALUES (386, '1648881418863051096', '用餐成本', '人天', 130.00, 220, 28600.00, 22000.00);
INSERT INTO `cmc_borrow_detail` VALUES (387, '1648881418863051096', '车辆加油费', '项', 15000.00, 1, 15000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (388, '1648881418863051096', '其它成本', '项', 25000.00, 1, 25000.00, 25000.00);
INSERT INTO `cmc_borrow_detail` VALUES (389, '1648881418863041095', '担保费', '次', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (390, '1648881418863031094', '担保费', '次', 32000.00, 1, 32000.00, 32000.00);
INSERT INTO `cmc_borrow_detail` VALUES (391, '1648881418863021093', '担保费', '次', 100000.00, 1, 100000.00, 100000.00);
INSERT INTO `cmc_borrow_detail` VALUES (392, '1648881418863011092', '村内用餐费', '项', 39282.00, 1, 39282.00, 39282.00);
INSERT INTO `cmc_borrow_detail` VALUES (393, '1648881418863001091', '车辆加油费', '项', 1664.00, 1, 1664.00, 1664.00);
INSERT INTO `cmc_borrow_detail` VALUES (394, '1648881418863001091', '用餐成本', '人天', 80.00, 12, 960.00, 960.00);
INSERT INTO `cmc_borrow_detail` VALUES (395, '1648881418863001091', '住宿成本', '人天', 100.00, 12, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (396, '1648881418862991090', '用餐成本', '人天', 100.00, 70, 7000.00, 5600.00);
INSERT INTO `cmc_borrow_detail` VALUES (397, '1648881418862991090', '住宿成本', '人天', 100.00, 70, 7000.00, 5600.00);
INSERT INTO `cmc_borrow_detail` VALUES (398, '1648881418862991090', '车辆加油费', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (399, '1648881418862991090', '埋石工具费', '项', 400.00, 1, 400.00, 400.00);
INSERT INTO `cmc_borrow_detail` VALUES (400, '1648881418862981089', '用餐成本', '1', NULL, NULL, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (401, '1648881418862971088', '直孔电站生活费', '天', 90.00, 62, 5580.00, 5580.00);
INSERT INTO `cmc_borrow_detail` VALUES (402, '1648881418862971088', '直孔电站住宿费', '天', 100.00, 62, 6200.00, 6200.00);
INSERT INTO `cmc_borrow_detail` VALUES (403, '1648881418862971088', '羊湖基地生活费', '天', 90.00, 57, 5130.00, 5130.00);
INSERT INTO `cmc_borrow_detail` VALUES (404, '1648881418862971088', '预估交通费用', '天', 300.00, 5, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (405, '1648881418862971088', '12月预估生活费用', '天', 90.00, 30, 2700.00, 2700.00);
INSERT INTO `cmc_borrow_detail` VALUES (406, '1648881418862971088', '12月预估住宿费', '天', 100.00, 20, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (407, '1648881418862971088', '羊湖基地物业、电费等杂费', '项', 1600.00, 1, 1600.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (408, '1648881418862971088', '12月查龙电站测量民工费', '项', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (409, '1648881418862971088', '12月直孔电站测量民工费', '项', 2200.00, 1, 2200.00, 2200.00);
INSERT INTO `cmc_borrow_detail` VALUES (410, '1648881418862971088', '工作餐宴请', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (411, '1648881418862971088', '返回机票及车费', '项', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (412, '1648881418862971088', '借款成本缴税税金', '项', 8000.00, 1, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (413, '1648881418862961087', NULL, NULL, NULL, NULL, 50000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (414, '1648881418862951086', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (415, '1648881418862951086', '二滩大坝水准月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (416, '1648881418862951086', '二滩大坝平面季度观测民工费', '人天', 120.00, 40, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (417, '1648881418862951086', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (418, '1648881418862951086', 'GNSS自动化设备维护及观测便道清理', '人工', 120.00, 20, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (419, '1648881418862951086', '车辆燃油及维修费', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (420, '1648881418862951086', '交通费用', '人次', 198.00, 8, 1584.00, 1584.00);
INSERT INTO `cmc_borrow_detail` VALUES (421, '1648881418862951086', '现场人员生活开支', '人天', 40.00, 150, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (422, '1648881418862941085', '中标服务费', '元', 28985.00, 1, 28985.00, 28985.00);
INSERT INTO `cmc_borrow_detail` VALUES (423, '1648881418862931084', '用餐成本', '元', 60.00, 964, 57840.00, 50000.00);
INSERT INTO `cmc_borrow_detail` VALUES (424, '1648881418862931084', '租房', '元', 6722.00, 2, 13444.00, 13444.00);
INSERT INTO `cmc_borrow_detail` VALUES (425, '1648881418862931084', '物业', '元', 1680.00, 2, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (426, '1648881418862931084', '打印', '元', 0.03, 1200000, 36000.00, 36000.00);
INSERT INTO `cmc_borrow_detail` VALUES (427, '1648881418862931084', '耗材成本', '元', 135.00, 50, 6750.00, 6750.00);
INSERT INTO `cmc_borrow_detail` VALUES (428, '1648881418862931084', '水电', '元', 2000.00, 5, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (429, '1648881418862931084', '住宿成本', '元', 320.00, 10, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (430, '1648881418862931084', '资料费用', '元', 26.00, 400, 10400.00, 10400.00);
INSERT INTO `cmc_borrow_detail` VALUES (431, '1648881418862931084', '其它成本', '元', 16000.00, 1, 16000.00, 16000.00);
INSERT INTO `cmc_borrow_detail` VALUES (432, '1648881418862921083', '资料费用', '幅', 1500.00, 6, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (433, '1648881418862911082', '车辆加油费', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (434, '1648881418862911082', '用餐成本', '人天', 80.00, 70, 5600.00, 5600.00);
INSERT INTO `cmc_borrow_detail` VALUES (435, '1648881418862911082', '住宿成本', '人天', 60.00, 70, 4200.00, 4200.00);
INSERT INTO `cmc_borrow_detail` VALUES (436, '1648881418862901081', '用餐成本', '人/天', 120.00, 68, 8160.00, 5440.00);
INSERT INTO `cmc_borrow_detail` VALUES (437, '1648881418862901081', '住宿成本', '人/天', 100.00, 68, 6800.00, 5440.00);
INSERT INTO `cmc_borrow_detail` VALUES (438, '1648881418862901081', '车辆加油费', '天', 200.00, 17, 3400.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (439, '1648881418862901081', '埋石工具材料费', '套', 100.00, 1, 100.00, 100.00);
INSERT INTO `cmc_borrow_detail` VALUES (440, '1648881418862901081', '测绘局坐标转换费', '点', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (441, '1648881418862891080', '用餐成本', '1', 1500.00, 5, 7500.00, 7500.00);
INSERT INTO `cmc_borrow_detail` VALUES (442, '1648881418862891080', '租车', '1', 200.00, 30, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (443, '1648881418862891080', '临时用工成本', '1', 8000.00, 5, 40000.00, 40000.00);
INSERT INTO `cmc_borrow_detail` VALUES (444, '1648881418862891080', '车辆加油费', '1', 300.00, 10, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (445, '1648881418862881079', '用餐成本', '人天', 100.00, 180, 18000.00, 18000.00);
INSERT INTO `cmc_borrow_detail` VALUES (446, '1648881418862881079', '住宿成本', '人天', 60.00, 180, 10800.00, 10800.00);
INSERT INTO `cmc_borrow_detail` VALUES (447, '1648881418862881079', '车辆加油费', '天', 45.00, 200, 9000.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (448, '1648881418862871078', '住宿成本', '人/天', 150.00, 60, 9000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (449, '1648881418862871078', '用餐成本', '人/天', 100.00, 60, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (450, '1648881418862871078', '采样工具采购', '项', 15000.00, 1, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (451, '1648881418862871078', '其他零星支出', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (452, '1648881418862871078', '临时租车', '天/元', 400.00, 30, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (453, '1648881418862861077', '资料费用', '幅', 1500.00, 3, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (454, '1648881418862851076', '空域办理费用', '项', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (455, '1648881418862851076', '水准民工费用', '元/天', 250.00, 80, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (456, '1648881418862851076', '住宿成本', '元/天', 60.00, 175, 10500.00, 10500.00);
INSERT INTO `cmc_borrow_detail` VALUES (457, '1648881418862851076', '用餐成本', '元/天', 60.00, 175, 10500.00, 10500.00);
INSERT INTO `cmc_borrow_detail` VALUES (458, '1648881418862851076', '车辆加油费', '元/天', 200.00, 25, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (459, '1648881418862841075', '业务费用', NULL, NULL, 1, 100000.00, 100000.00);
INSERT INTO `cmc_borrow_detail` VALUES (460, '1648881418862831074', '住宿成本', '元', 90.00, 32, 2880.00, 2880.00);
INSERT INTO `cmc_borrow_detail` VALUES (461, '1648881418862831074', '车辆加油费', '项', 1400.00, 1, 1400.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (462, '1648881418862831074', '用餐成本', '元', 70.00, 32, 2240.00, 2240.00);
INSERT INTO `cmc_borrow_detail` VALUES (463, '1648881418862821073', '车辆加油费', '项', 3000.00, 1, 3000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (464, '1648881418862821073', '住宿成本', '人天', 80.00, 44, 3520.00, 3520.00);
INSERT INTO `cmc_borrow_detail` VALUES (465, '1648881418862821073', '用餐成本', '人天', 100.00, 44, 4400.00, 3520.00);
INSERT INTO `cmc_borrow_detail` VALUES (466, '1648881418862821073', 'SCCORS中心正常计算费用', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (467, '1648881418862811072', '住宿成本', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (468, '1648881418862811072', '用餐成本', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (469, '1648881418862811072', '用工成本（一体化测斜仪安装）', '人工', 220.00, 80, 17600.00, 17600.00);
INSERT INTO `cmc_borrow_detail` VALUES (470, '1648881418862811072', '用工成本（双层棱镜保护罩拆卸及安装）', '人工', 220.00, 100, 22000.00, 22000.00);
INSERT INTO `cmc_borrow_detail` VALUES (471, '1648881418862811072', '临时用工体检费用（当地体检）', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (472, '1648881418862811072', '车辆燃油及保养、维修费', '项', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (473, '1648881418862811072', '土建物资、五金设备采购', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (474, '1648881418862811072', '安全文明施工措施成本', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (475, '1648881418862811072', '技术咨询费', '项', 8000.00, 1, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (476, '1648881418862811072', '人员进出场交通费', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (477, '1648881418862801071', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (478, '1648881418862801071', '二滩大坝水准月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (479, '1648881418862801071', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (480, '1648881418862801071', 'GNSS自动化设备维护', '人天', 120.00, 8, 960.00, 960.00);
INSERT INTO `cmc_borrow_detail` VALUES (481, '1648881418862801071', '车辆燃油及维修费', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (482, '1648881418862801071', '交通费用', '人次', 198.00, 8, 1584.00, 1584.00);
INSERT INTO `cmc_borrow_detail` VALUES (483, '1648881418862801071', '现场人员生活开支', '人天', 40.00, 120, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (484, '1648881418862801071', '基准网观测便道维护', '项', 18000.00, 1, 18000.00, 18000.00);
INSERT INTO `cmc_borrow_detail` VALUES (485, '1648881418862791070', '其它成本', '项', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (486, '1648881418862781069', '项目成本', '项', 1706.00, 1, 1706.00, 1706.00);
INSERT INTO `cmc_borrow_detail` VALUES (487, '1648881418862781069', '车辆加油费', '项', 363.00, 1, 363.00, 363.00);
INSERT INTO `cmc_borrow_detail` VALUES (488, '1648881418862771068', '团体意外伤害保险', '项', 20993.00, 1, 20993.00, 20993.00);
INSERT INTO `cmc_borrow_detail` VALUES (489, '1648881418862761067', '审查成本', '1', 21000.00, 1, 21000.00, 21000.00);
INSERT INTO `cmc_borrow_detail` VALUES (490, '1648881418862751066', '住宿成本', '项', 15000.00, 1, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (491, '1648881418862751066', '用餐成本', '项', 30000.00, 1, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (492, '1648881418862751066', '办公设备配置', '项', 8000.00, 1, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (493, '1648881418862751066', '生活用品采购', '项', 7000.00, 1, 7000.00, 7000.00);
INSERT INTO `cmc_borrow_detail` VALUES (494, '1648881418862751066', '车辆燃油费', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (495, '1648881418862751066', '新员工试用期补贴（何安）', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (496, '1648881418862751066', '前期临时用工', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (497, '1648881418862741065', '保险费', NULL, NULL, NULL, 174680.00, 174680.00);
INSERT INTO `cmc_borrow_detail` VALUES (498, '1648881418862731064', '车辆加油费', '元', 500.00, 4, 2000.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (499, '1648881418862731064', '住宿成本', '人/天', 150.00, 20, 3000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (500, '1648881418862731064', '用餐成本', '人/天', 100.00, 20, 2000.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (501, '1648881418862721063', '车辆加油费', '月', 2000.00, 3, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (502, '1648881418862721063', '用餐成本', '天', 300.00, 150, 45000.00, 45000.00);
INSERT INTO `cmc_borrow_detail` VALUES (503, '1648881418862721063', '用工成本', '月', 21500.00, 5, 107500.00, 107500.00);
INSERT INTO `cmc_borrow_detail` VALUES (504, '1648881418862711062', '住宿成本', '人天', 150.00, 20, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (505, '1648881418862711062', '用餐成本', '人天', 120.00, 40, 4800.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (506, '1648881418862711062', '车辆加油费', '项', 6000.00, 1, 6000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (507, '1648881418862711062', '静态数据解算及正常高转换费用', '项', 2000.00, 1, 2000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (508, '1648881418862701061', '车辆加油费', '元', 500.00, 3, 1500.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (509, '1648881418862701061', '住宿', '元', 120.00, 12, 1440.00, 1440.00);
INSERT INTO `cmc_borrow_detail` VALUES (510, '1648881418862701061', '用餐', '元', 90.00, 28, 2520.00, 2520.00);
INSERT INTO `cmc_borrow_detail` VALUES (511, '1648881418862691060', '住宿成本', '人天', 150.00, 80, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (512, '1648881418862691060', '用餐成本', '人天', 150.00, 80, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (513, '1648881418862681059', '资料费用', '幅', 1500.00, 16, 24000.00, 24000.00);
INSERT INTO `cmc_borrow_detail` VALUES (514, '1648881418862671058', '车辆加油保养', '1', 1.00, NULL, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (515, '1648881418862671058', '生活费', '1', 50.00, 240, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (516, '1648881418862671058', '人工费15%', '1', 0.18, 557810, 100405.80, 100400.00);
INSERT INTO `cmc_borrow_detail` VALUES (517, '1648881418862661057', '用餐成本', '人天', 100.00, 72, 7200.00, 5760.00);
INSERT INTO `cmc_borrow_detail` VALUES (518, '1648881418862661057', '住宿成本', '人天', 60.00, 72, 4320.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (519, '1648881418862661057', '交通成本', '项', 2400.00, 1, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (520, '1648881418862661057', '飞行组费用', '项', 5086.00, 1, 5086.00, 5086.00);
INSERT INTO `cmc_borrow_detail` VALUES (521, '1648881418862651056', '住宿成本', '元', 140.00, 2, 280.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (522, '1648881418862651056', '用餐成本', '元', 160.00, 2, 320.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (523, '1648881418862651056', '车辆加油费', '元', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (524, '1648881418862641055', '中标服务费', '元', 25500.00, 1, 25500.00, 25500.00);
INSERT INTO `cmc_borrow_detail` VALUES (525, '1648881418862631054', '机票', '人.次', 1000.00, 4, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (526, '1648881418862631054', '用餐成本', '人.天', 100.00, 33, 3300.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (527, '1648881418862631054', '住宿成本', '人.天', 80.00, 33, 2640.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (528, '1648881418862631054', '租车及加油', '人.天', 800.00, 11, 8800.00, 4400.00);
INSERT INTO `cmc_borrow_detail` VALUES (529, '1648881418862631054', '用工', '人.天', 300.00, 4, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (530, '1648881418862631054', '药品及劳保用品', '项', 200.00, 1, 200.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (531, '1648881418862631054', '设备邮寄费', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (532, '1648881418862621053', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (533, '1648881418862621053', '二滩大坝水准月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (534, '1648881418862621053', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (535, '1648881418862621053', 'GNSS自动化设备维护', '人天', 120.00, 8, 960.00, 960.00);
INSERT INTO `cmc_borrow_detail` VALUES (536, '1648881418862621053', '车辆燃油及维修费', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (537, '1648881418862621053', '交通费用', '人次', 198.00, 8, 1584.00, 1584.00);
INSERT INTO `cmc_borrow_detail` VALUES (538, '1648881418862621053', '现场人员生活开支', '人天', 40.00, 120, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (539, '1648881418862621053', '桐子林基准网观测', '人天', 120.00, 73, 8760.00, 8760.00);
INSERT INTO `cmc_borrow_detail` VALUES (540, '1648881418862611052', NULL, NULL, NULL, NULL, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (541, '1648881418862601051', '业务费用', NULL, NULL, 1, 150000.00, 150000.00);
INSERT INTO `cmc_borrow_detail` VALUES (542, '1648881418862591050', '资料费用', '幅', 1500.00, 34, 51000.00, 51000.00);
INSERT INTO `cmc_borrow_detail` VALUES (543, '1648881418862581049', '中标服务费', '元', 20576.00, 1, 20576.00, 20576.00);
INSERT INTO `cmc_borrow_detail` VALUES (544, '1648881418862571048', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (545, '1648881418862571048', '二滩大坝水准月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (546, '1648881418862571048', '二滩大坝基准网观测民工费', '人天', 120.00, 157, 18840.00, 18840.00);
INSERT INTO `cmc_borrow_detail` VALUES (547, '1648881418862571048', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (548, '1648881418862571048', 'GNSS自动化设备维护及观测便道清理', '人工', 120.00, 8, 960.00, 960.00);
INSERT INTO `cmc_borrow_detail` VALUES (549, '1648881418862571048', '车辆燃油及维修费', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (550, '1648881418862571048', '交通费用', '人次', 198.00, 6, 1188.00, 1188.00);
INSERT INTO `cmc_borrow_detail` VALUES (551, '1648881418862571048', '现场人员生活开支', '人天', 40.00, 132, 5280.00, 5280.00);
INSERT INTO `cmc_borrow_detail` VALUES (552, '1648881418862561047', '担保费', '1', 1.00, 17579, 17579.30, 17579.30);
INSERT INTO `cmc_borrow_detail` VALUES (553, '1648881418862551046', '项目补借款', '项', 8873.00, 1, 8873.00, 8873.00);
INSERT INTO `cmc_borrow_detail` VALUES (554, '1648881418862541045', NULL, NULL, NULL, NULL, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (555, '1648881418862531044', '进场交通费', '项', 1800.00, 1, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (556, '1648881418862531044', '机场设备托运费', '项', 550.00, 1, 550.00, 550.00);
INSERT INTO `cmc_borrow_detail` VALUES (557, '1648881418862531044', '用餐成本', '人.天', 85.00, 28, 2380.00, 2240.00);
INSERT INTO `cmc_borrow_detail` VALUES (558, '1648881418862531044', '住宿成本', '人.天', 100.00, 28, 2800.00, 2240.00);
INSERT INTO `cmc_borrow_detail` VALUES (559, '1648881418862531044', '租车', '天.元', 1000.00, 7, 7000.00, 7000.00);
INSERT INTO `cmc_borrow_detail` VALUES (560, '1648881418862531044', '加油', '项', 1340.00, 1, 1340.00, 1340.00);
INSERT INTO `cmc_borrow_detail` VALUES (561, '1648881418862521043', '用餐成本', '人.天', 90.00, 12, 1080.00, 1080.00);
INSERT INTO `cmc_borrow_detail` VALUES (562, '1648881418862521043', '住宿成本', '人.天', 90.00, 10, 900.00, 900.00);
INSERT INTO `cmc_borrow_detail` VALUES (563, '1648881418862521043', '交通成本', '项', 2380.00, 1, 2380.00, 2380.00);
INSERT INTO `cmc_borrow_detail` VALUES (564, '1648881418862511042', '住宿成本', '元', 80.00, 16, 1280.00, 1280.00);
INSERT INTO `cmc_borrow_detail` VALUES (565, '1648881418862511042', '用餐成本', '元', 80.00, 16, 1280.00, 1280.00);
INSERT INTO `cmc_borrow_detail` VALUES (566, '1648881418862511042', '车辆加油费', '元', 1376.00, 1, 1376.00, 1376.00);
INSERT INTO `cmc_borrow_detail` VALUES (567, '1648881418862501041', '住宿成本', '元', 100.00, 58, 5800.00, 3480.00);
INSERT INTO `cmc_borrow_detail` VALUES (568, '1648881418862501041', '用餐成本', '元', 100.00, 58, 5800.00, 3480.00);
INSERT INTO `cmc_borrow_detail` VALUES (569, '1648881418862501041', '车辆加油费', '元', 2500.00, 1, 2500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (570, '1648881418862501041', '坐标转换费用', '元', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (571, '1648881418862491040', '餐饮费（米林藏汉缘农家乐）', '项', 13644.00, 1, 13644.00, 13644.00);
INSERT INTO `cmc_borrow_detail` VALUES (572, '1648881418862491040', '餐饮费（米林匠心小厨）', '项', 7685.00, 1, 7685.00, 7685.00);
INSERT INTO `cmc_borrow_detail` VALUES (573, '1648881418862491040', '餐饮费（洪斌银鑫大酒店）', '项', 75680.00, 1, 75680.00, 75680.00);
INSERT INTO `cmc_borrow_detail` VALUES (574, '1648881418862491040', '住宿费（米林隧州柴火鸡餐饮酒店住宿）', '项', 21239.00, 1, 21239.00, 21239.00);
INSERT INTO `cmc_borrow_detail` VALUES (575, '1648881418862491040', '住宿费（米林县卧龙卧雪岗农庄农民专业合作社）', '项', 100168.00, 1, 100168.00, 100168.00);
INSERT INTO `cmc_borrow_detail` VALUES (576, '1648881418862491040', '住宿费（洪斌银鑫大酒店）', '项', 310800.00, 1, 310800.00, 310800.00);
INSERT INTO `cmc_borrow_detail` VALUES (577, '1648881418862491040', '交通费（米林县城祥客运有限公司）', '项', 221340.00, 1, 221340.00, 221340.00);
INSERT INTO `cmc_borrow_detail` VALUES (578, '1648881418862481039', '保险费', '份', 1062.00, 1, 1062.00, 1062.00);
INSERT INTO `cmc_borrow_detail` VALUES (579, '1648881418862471038', '住宿成本', '人.天', 80.00, 32, 2560.00, 2560.00);
INSERT INTO `cmc_borrow_detail` VALUES (580, '1648881418862471038', '用餐成本', '人.天', 80.00, 32, 2560.00, 2560.00);
INSERT INTO `cmc_borrow_detail` VALUES (581, '1648881418862471038', '燃油费', '项', 1200.00, 1, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (582, '1648881418862471038', '坐标转换费用', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (583, '1648881418862471038', '民工费', '人.天', 250.00, 2, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (584, '1648881418862461037', '中标服务费', '元', 10035.00, 1, 10035.00, 10035.00);
INSERT INTO `cmc_borrow_detail` VALUES (585, '1648881418862451036', '用餐成本（测绘工程中心）', '人.天', 120.00, 350, 42000.00, 33600.00);
INSERT INTO `cmc_borrow_detail` VALUES (586, '1648881418862451036', '住宿成本（测绘工程中心）', '人.天', 80.00, 350, 28000.00, 22400.00);
INSERT INTO `cmc_borrow_detail` VALUES (587, '1648881418862451036', '租车（测绘工程中心）', '元.天', 900.00, 50, 45000.00, 36000.00);
INSERT INTO `cmc_borrow_detail` VALUES (588, '1648881418862451036', '车辆加油费（测绘工程中心）', '元.天', 150.00, 50, 7500.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (589, '1648881418862451036', '机票（测绘工程中心）', '人.元', 1500.00, 8, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (590, '1648881418862451036', '用工成本（测绘工程中心）', '元.天', 300.00, 80, 24000.00, 24000.00);
INSERT INTO `cmc_borrow_detail` VALUES (591, '1648881418862451036', '民工保险（测绘工程中心）', '项', 200.00, 5, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (592, '1648881418862451036', '用餐成本（激光技术中心）', '人.天', 120.00, 180, 21600.00, 14400.00);
INSERT INTO `cmc_borrow_detail` VALUES (593, '1648881418862451036', '住宿成本（激光技术中心）', '人.天', 130.00, 180, 23400.00, 18000.00);
INSERT INTO `cmc_borrow_detail` VALUES (594, '1648881418862451036', '车辆加油费（激光技术中心）', '元.天', 150.00, 45, 6750.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (595, '1648881418862451036', '租车（激光技术中心）', '元.天', 800.00, 45, 36000.00, 24500.00);
INSERT INTO `cmc_borrow_detail` VALUES (596, '1648881418862451036', '返程机票（激光技术中心）', '人.元', 1500.00, 6, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (597, '1648881418862451036', '设备托运费用（激光技术中心）', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (598, '1648881418862441035', '住宿成本', '元', 80.00, 28, 2240.00, 2240.00);
INSERT INTO `cmc_borrow_detail` VALUES (599, '1648881418862441035', '用餐成本', '元', 70.00, 28, 1960.00, 1960.00);
INSERT INTO `cmc_borrow_detail` VALUES (600, '1648881418862441035', '车辆加油费', '元', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (601, '1648881418862441035', '耗材成本', '元', 200.00, 1, 200.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (602, '1648881418862441035', '坐标转换费', '元', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (603, '1648881418862431034', '住宿成本', '元', 100.00, 110, 11000.00, 4680.00);
INSERT INTO `cmc_borrow_detail` VALUES (604, '1648881418862431034', '用餐成本', '元', 100.00, 110, 11000.00, 5460.00);
INSERT INTO `cmc_borrow_detail` VALUES (605, '1648881418862431034', '车辆加油费', '元', 5000.00, 1, 5000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (606, '1648881418862431034', '坐标转换费用', '元', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (607, '1648881418862421033', '住宿成本', '人天', 100.00, 14, 1400.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (608, '1648881418862421033', '用餐成本', '人天', 100.00, 14, 1400.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (609, '1648881418862421033', '租车', '天', 500.00, 7, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (610, '1648881418862421033', '其它成本', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (611, '1648881418862411032', '中标服务费', '元', 4650.00, 1, 4650.00, 4650.00);
INSERT INTO `cmc_borrow_detail` VALUES (612, '1648881418862401031', '住宿成本', '间', 200.00, 40, 8000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (613, '1648881418862401031', '用餐成本', '人天', 150.00, 75, 11250.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (614, '1648881418862401031', '车辆加油费', NULL, NULL, NULL, 7500.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (615, '1648881418862391030', '用餐成本', '项', 27075.40, 1, 27075.40, 27075.40);
INSERT INTO `cmc_borrow_detail` VALUES (616, '1648881418862391030', '住宿成本', '项', 23051.00, 1, 23051.00, 23051.00);
INSERT INTO `cmc_borrow_detail` VALUES (617, '1648881418862391030', '租车（德兴乡租赁皮卡车）', '元.天', 600.00, 19, 11400.00, 11400.00);
INSERT INTO `cmc_borrow_detail` VALUES (618, '1648881418862391030', '租车（墨脱组租赁普拉多）', '元.天', 900.00, 25, 22500.00, 22500.00);
INSERT INTO `cmc_borrow_detail` VALUES (619, '1648881418862391030', '租车（普拉多轮胎更换费用）', '项', 1700.00, 1, 1700.00, 1700.00);
INSERT INTO `cmc_borrow_detail` VALUES (620, '1648881418862391030', '租车（米林组租赁坦克300）', '元.天', 700.00, 15, 10500.00, 10500.00);
INSERT INTO `cmc_borrow_detail` VALUES (621, '1648881418862391030', '车辆加油费', '项', 11755.00, 1, 11755.00, 11755.00);
INSERT INTO `cmc_borrow_detail` VALUES (622, '1648881418862391030', '民工费', '项', 1480.00, 1, 1480.00, 1480.00);
INSERT INTO `cmc_borrow_detail` VALUES (623, '1648881418862391030', '交通费（返程机票）', '项', 20127.50, 1, 20127.50, 20127.50);
INSERT INTO `cmc_borrow_detail` VALUES (624, '1648881418862391030', '药品', '项', 2091.00, 1, 2091.00, 2091.00);
INSERT INTO `cmc_borrow_detail` VALUES (625, '1648881418862391030', '生产用品（网络CORS账号、五金、打印等）', '项', 3515.20, 1, 3515.20, 3515.20);
INSERT INTO `cmc_borrow_detail` VALUES (626, '1648881418862391030', '劳保用品（防滑鞋及其它安全用品）', '项', 10664.00, 1, 10664.00, 10664.00);
INSERT INTO `cmc_borrow_detail` VALUES (627, '1648881418862381029', '用餐成本', '人.天', 88.00, 50, 4400.00, 4400.00);
INSERT INTO `cmc_borrow_detail` VALUES (628, '1648881418862381029', '住宿成本', '人.天', 96.00, 50, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (629, '1648881418862381029', '车辆加油费', '元.天', 200.00, 10, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (630, '1648881418862381029', '进场机票', '元', 1800.00, 1, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (631, '1648881418862381029', '无人船邮寄费用', '元', 1300.00, 1, 1300.00, 1300.00);
INSERT INTO `cmc_borrow_detail` VALUES (632, '1648881418862371028', '住宿成本', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (633, '1648881418862371028', '生活成本', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (634, '1648881418862371028', '车辆燃油及保养、维修费', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (635, '1648881418862371028', '项目部人员进出场交通费', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (636, '1648881418862371028', '光纤、电缆铺设人工费', '人工', 220.00, 40, 8800.00, 8800.00);
INSERT INTO `cmc_borrow_detail` VALUES (637, '1648881418862371028', '安全文明施工物资采购', '项', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (638, '1648881418862371028', '新员工试用期补贴（何安、魏琪豪）', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (639, '1648881418862361027', '商业保险', '位', 1062.00, 5, 5310.00, 5310.00);
INSERT INTO `cmc_borrow_detail` VALUES (640, '1648881418862351026', '住宿成本', '人天', 100.00, 160, 16000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (641, '1648881418862351026', '用餐成本', '人天', 100.00, 160, 16000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (642, '1648881418862351026', '车辆加油费', '项', 8000.00, 1, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (643, '1648881418862341025', '住宿费用', '间', 110.00, 60, 6600.00, 6600.00);
INSERT INTO `cmc_borrow_detail` VALUES (644, '1648881418862341025', '生活费用', '人天', 100.00, 120, 12000.00, 9600.00);
INSERT INTO `cmc_borrow_detail` VALUES (645, '1648881418862341025', '车辆燃油及过路费', '项', 5000.00, 1, 5000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (646, '1648881418862341025', '民工费用', '人天', 200.00, 50, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (647, '1648881418862331024', '8月份两司机部分工资', '人', 6000.00, 2, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (648, '1648881418862331024', '8月份车辆维护、过路、燃油等费用', '辆', 2000.00, 4, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (649, '1648881418862331024', '8月份30人生活费用（函厨师工资）', '人天', 50.00, 930, 46500.00, 46500.00);
INSERT INTO `cmc_borrow_detail` VALUES (650, '1648881418862331024', '8月至10月渝北一套房屋租金、宽带、水电等费用', '季度', 10800.00, 1, 10800.00, 10800.00);
INSERT INTO `cmc_borrow_detail` VALUES (651, '1648881418862331024', '7月至9月江津一套房屋租金、宽带、水电等费用', '季度', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (652, '1648881418862331024', '7月份江津项目租车费用', '月', 2800.00, 1, 2800.00, 2800.00);
INSERT INTO `cmc_borrow_detail` VALUES (653, '1648881418862331024', '监测中心借用实习人员劳务费用', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (654, '1648881418862331024', '测斜仪器70米电缆采购', '项', 3600.00, 1, 3600.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (655, '1648881418862331024', '7月份实习生学校管理费', '人', 100.00, 12, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (656, '1648881418862321023', '人员成本', '元', 1.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (657, '1648881418862311022', '车辆加油费', '项', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (658, '1648881418862311022', '住宿成本', '人.天', 80.00, 32, 2560.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (659, '1648881418862311022', '用餐成本', '人.天', 100.00, 32, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (660, '1648881418862301021', '接待费用', NULL, NULL, NULL, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (661, '1648881418862291020', '中标服务费', '项', 22500.00, 1, 22500.00, 22500.00);
INSERT INTO `cmc_borrow_detail` VALUES (662, '1648881418862281019', '团体意外伤害保险', '项', 25193.00, 1, 25193.00, 25193.00);
INSERT INTO `cmc_borrow_detail` VALUES (663, '1648881418862271018', '补充借款', '项', 20213.00, 1, 20213.00, 20213.00);
INSERT INTO `cmc_borrow_detail` VALUES (664, '1648881418862261017', '住宿成本', '人天', 240.00, 60, 14400.00, 14400.00);
INSERT INTO `cmc_borrow_detail` VALUES (665, '1648881418862261017', '用餐成本', '人天', 80.00, 90, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (666, '1648881418862261017', '机票', '项', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (667, '1648881418862261017', '车辆加油费', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (668, '1648881418862251016', '油费', '元', 500.00, 3, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (669, '1648881418862251016', '吃饭', '元', 120.00, 15, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (670, '1648881418862251016', '住宿', '元', 150.00, 8, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (671, '1648881418862241015', '住宿成本', '项', 400.00, 1, 400.00, 400.00);
INSERT INTO `cmc_borrow_detail` VALUES (672, '1648881418862241015', '用餐成本', '项', 630.00, 1, 630.00, 630.00);
INSERT INTO `cmc_borrow_detail` VALUES (673, '1648881418862241015', '车辆加油费', '项', 400.00, 1, 400.00, 400.00);
INSERT INTO `cmc_borrow_detail` VALUES (674, '1648881418862231014', '资料费用', '1', 18800.00, 1, 18800.00, 18800.00);
INSERT INTO `cmc_borrow_detail` VALUES (675, '1648881418862221013', '5月份司机部分租金', '月', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (676, '1648881418862221013', '5月份车辆维护、过路、燃油费用', '月', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (677, '1648881418862221013', '5月份28人生活费用', '月', 45.00, 868, 39060.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (678, '1648881418862221013', '3、4表总方案协调费用', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (679, '1648881418862221013', '地面沉降孔钻孔协调费', '项', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (680, '1648881418862221013', '5月份办公耗材费用', '月', 1000.00, 4, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (681, '1648881418862221013', '35公里大网复测尾款', '项', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (682, '1648881418862221013', '4月至6月房屋租金', '季度', 9600.00, 1, 9600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (683, '1648881418862221013', '5月至10月房屋租金', '季度', 9600.00, 2, 19200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (684, '1648881418862211012', '住宿成本', '人天', 150.00, 30, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (685, '1648881418862211012', '用餐成本', '人天', 150.00, 30, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (686, '1648881418862211012', '车辆加油费', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (687, '1648881418862201011', '住宿成本', '间', 120.00, 21, 2520.00, 2520.00);
INSERT INTO `cmc_borrow_detail` VALUES (688, '1648881418862201011', '用餐成本', '人天', 80.00, 40, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (689, '1648881418862201011', '车辆加油费', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (690, '1648881418862191010', '住宿成本', '元/间', 120.00, 16, 1920.00, 1920.00);
INSERT INTO `cmc_borrow_detail` VALUES (691, '1648881418862191010', '用餐成本', '人天', 60.00, 24, 1440.00, 1440.00);
INSERT INTO `cmc_borrow_detail` VALUES (692, '1648881418862191010', '用工成本', '人天', 260.00, 4, 1040.00, 1040.00);
INSERT INTO `cmc_borrow_detail` VALUES (693, '1648881418862191010', '交通成本', '项', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (694, '1648881418862181009', '商务成本', NULL, NULL, NULL, 47700.00, 47700.00);
INSERT INTO `cmc_borrow_detail` VALUES (695, '1648881418862171008', '住宿成本', '间', 120.00, 29, 3480.00, 3480.00);
INSERT INTO `cmc_borrow_detail` VALUES (696, '1648881418862171008', '用餐成本', '人天', 80.00, 45, 3600.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (697, '1648881418862171008', '租车', '天', 450.00, 29, 13050.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (698, '1648881418862171008', '界桩制作、运输及安装', '项', 26500.00, 1, 26500.00, 26500.00);
INSERT INTO `cmc_borrow_detail` VALUES (699, '1648881418862171008', '水位牌建设', '个', 10000.00, 2, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (700, '1648881418862171008', '其他', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (701, '1648881418862161007', '住宿成本', NULL, NULL, NULL, 4300.00, 4300.00);
INSERT INTO `cmc_borrow_detail` VALUES (702, '1648881418862161007', '车辆加油费', NULL, NULL, NULL, 2200.00, 2200.00);
INSERT INTO `cmc_borrow_detail` VALUES (703, '1648881418862161007', '用餐成本', NULL, NULL, NULL, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (704, '1648881418862151006', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (705, '1648881418862151006', '二滩大坝水准月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (706, '1648881418862151006', '二滩大坝平面季度观测民工费', '人天', 120.00, 40, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (707, '1648881418862151006', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (708, '1648881418862151006', 'GNSS自动化设备维护及观测便道清理', '人工', 120.00, 20, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (709, '1648881418862151006', '车辆燃油及维修费', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (710, '1648881418862151006', '交通费用', '人次', 198.00, 6, 1188.00, 1188.00);
INSERT INTO `cmc_borrow_detail` VALUES (711, '1648881418862151006', '现场人员生活开支', '人天', 40.00, 110, 4400.00, 4400.00);
INSERT INTO `cmc_borrow_detail` VALUES (712, '1648881418862141005', '车辆加油费', '1', 300.00, 10, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (713, '1648881418862141005', '生活费', '1', 30.00, 240, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (714, '1648881418862141005', '生产费用', '1', 0.08, 560000, 44800.00, 44800.00);
INSERT INTO `cmc_borrow_detail` VALUES (715, '1648881418862131004', '用餐成本', '人天', 80.00, 24, 1920.00, 1920.00);
INSERT INTO `cmc_borrow_detail` VALUES (716, '1648881418862131004', '住宿成本', '人天', 100.00, 24, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (717, '1648881418862131004', '车辆加油费', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (718, '1648881418862131004', '坐标转换', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (719, '1648881418862121003', '保险费', '元', 236.25, 1, 236.25, 236.25);
INSERT INTO `cmc_borrow_detail` VALUES (720, '1648881418862111002', '租房', '元', 8402.00, 2, 16804.00, 16804.00);
INSERT INTO `cmc_borrow_detail` VALUES (721, '1648881418862111002', '住宿成本', '元', 8000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (722, '1648881418862111002', '耗材成本', '件', 135.00, 200, 27000.00, 27000.00);
INSERT INTO `cmc_borrow_detail` VALUES (723, '1648881418862111002', '车辆加油费', '元', NULL, NULL, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (724, '1648881418862111002', '打印', '元', 0.03, 1000000, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (725, '1648881418862111002', '用餐成本', '元', 60.00, 870, 52200.00, 52200.00);
INSERT INTO `cmc_borrow_detail` VALUES (726, '1648881418862111002', '水电', '元', NULL, NULL, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (727, '1648881418862111002', '办公设备购置', '台', 1000.00, 8, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (728, '1648881418862111002', '人员成本', '元', 5000.00, 2, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (729, '1648881418862101001', '资料费用', '幅', 1500.00, 23, 34500.00, 34500.00);
INSERT INTO `cmc_borrow_detail` VALUES (730, '1648881418862091000', '项目成本', '项', 1042.00, 1, 1042.00, 1042.00);
INSERT INTO `cmc_borrow_detail` VALUES (731, '1648881418862091000', '车辆加油费', '项', 435.00, 1, 435.00, 435.00);
INSERT INTO `cmc_borrow_detail` VALUES (732, '1648881418862091000', '坐标转换（高程）', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (733, '1648881418862080999', '专利年费', '1', 135.00, 1, 135.00, 135.00);
INSERT INTO `cmc_borrow_detail` VALUES (734, '1648881418862080999', '实审费', '1', 2500.00, 2, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (735, '1648881418862080999', '公布印刷费', '1', 950.00, 2, 1900.00, 1900.00);
INSERT INTO `cmc_borrow_detail` VALUES (736, '1648881418862070998', '住宿成本', '人天', 80.00, 35, 2800.00, 2800.00);
INSERT INTO `cmc_borrow_detail` VALUES (737, '1648881418862070998', '用餐成本', '人天', 100.00, 35, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (738, '1648881418862070998', '车辆加油费', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (739, '1648881418862060997', '接待费用', NULL, NULL, NULL, 50000.00, 50000.00);
INSERT INTO `cmc_borrow_detail` VALUES (740, '1648881418862050996', '车辆加油费', '天', 150.00, 30, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (741, '1648881418862050996', '住宿成本', '人天', 100.00, 90, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (742, '1648881418862050996', '用餐成本', '人天', 100.00, 90, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (743, '1648881418862040995', '中标服务费', '项', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (744, '1648881418862030994', '其它成本', NULL, NULL, NULL, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (745, '1648881418862020993', '住宿成本', '人天', 100.00, 30, 3000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (746, '1648881418862020993', '用餐成本', '人天', 80.00, 30, 2400.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (747, '1648881418862020993', '车辆加油费', '项', 3000.00, 1, 3000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (748, '1648881418862010992', '住宿成本', '人天', 80.00, 30, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (749, '1648881418862010992', '用餐成本', '人天', 100.00, 30, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (750, '1648881418862010992', '车辆加油费', '项', 4000.00, 1, 4000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (751, '1648881418862000991', '用餐成本', '人/天', 100.00, 600, 60000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (752, '1648881418862000991', '住宿成本', '人/天', 130.00, 600, 78000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (753, '1648881418862000991', '租车', '元.天', 750.00, 40, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (754, '1648881418862000991', '资料打印、办公用品等', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (755, '1648881418861990990', '7月份两司机部分工资', '人', 6000.00, 2, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (756, '1648881418861990990', '7月份车辆维护、过路、燃油等费用', '辆', 2000.00, 4, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (757, '1648881418861990990', '7月份30人生活费用（函厨师工资）', '人天', 50.00, 930, 46500.00, 46500.00);
INSERT INTO `cmc_borrow_detail` VALUES (758, '1648881418861990990', '地表沉降孔钻设', '个', 55.00, 200, 11000.00, 11000.00);
INSERT INTO `cmc_borrow_detail` VALUES (759, '1648881418861990990', '发电机', '台', 1200.00, 1, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (760, '1648881418861990990', '7月份办公耗材、监测点耗材', '项', 1000.00, 4, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (761, '1648881418861990990', '6月至8月渝北一套房屋租金、宽带、水电等费用', '季度', 10800.00, 1, 10800.00, 10800.00);
INSERT INTO `cmc_borrow_detail` VALUES (762, '1648881418861990990', '6月份实习生学校管理费', '人', 100.00, 10, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (763, '1648881418861990990', '6月份江津项目租车费用', '辆', 3200.00, 1, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (764, '1648881418861990990', '徕卡全站仪检定费用', '台', 1900.00, 1, 1900.00, 1900.00);
INSERT INTO `cmc_borrow_detail` VALUES (765, '1648881418861990990', '监测中心借用实习人员劳务费用', '项目', 3000.00, 1, 3000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (766, '1648881418861980989', '差旅费', '元', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (767, '1648881418861970988', '资料费用', '幅', 1500.00, 14, 21000.00, 21000.00);
INSERT INTO `cmc_borrow_detail` VALUES (768, '1648881418861960987', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (769, '1648881418861960987', '二滩大坝水准月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (770, '1648881418861960987', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (771, '1648881418861960987', 'GNSS自动化设备维护', '人工', 120.00, 8, 960.00, 960.00);
INSERT INTO `cmc_borrow_detail` VALUES (772, '1648881418861960987', '车辆燃油及维修费', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (773, '1648881418861960987', '交通费用', '人次', 198.00, 8, 1584.00, 1584.00);
INSERT INTO `cmc_borrow_detail` VALUES (774, '1648881418861960987', '现场人员生活开支', '人天', 40.00, 120, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (775, '1648881418861950986', '担保费', NULL, 1.00, 1, 160000.00, 160000.00);
INSERT INTO `cmc_borrow_detail` VALUES (776, '1648881418861940985', '空域费用', '元', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (777, '1648881418861940985', '车辆加油费', '元', 400.00, 12, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (778, '1648881418861940985', '住宿成本', '人天', 150.00, 60, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (779, '1648881418861940985', '用餐成本', '人天', 100.00, 120, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (780, '1648881418861930984', '住宿成本', '项', 25680.00, 1, 25680.00, 25680.00);
INSERT INTO `cmc_borrow_detail` VALUES (781, '1648881418861920983', '用餐成本', '1', 30.00, 1350, 40500.00, 40500.00);
INSERT INTO `cmc_borrow_detail` VALUES (782, '1648881418861910982', '保险费', '元', 393.75, 1, 393.75, 393.75);
INSERT INTO `cmc_borrow_detail` VALUES (783, '1648881418861900981', '用餐成本', '项', 15000.00, 1, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (784, '1648881418861900981', '住宿成本', '项', 15000.00, 1, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (785, '1648881418861900981', '外包劳务成本', '项', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (786, '1648881418861890980', '住宿费用', '间', 120.00, 80, 9600.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (787, '1648881418861890980', '生活费用', '人天', 80.00, 160, 12800.00, 9600.00);
INSERT INTO `cmc_borrow_detail` VALUES (788, '1648881418861890980', '车辆燃油及过路费', '项', 7000.00, 1, 7000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (789, '1648881418861890980', '民工费用', '人天', 200.00, 195, 39000.00, 22400.00);
INSERT INTO `cmc_borrow_detail` VALUES (790, '1648881418861880979', '中标服务费', '元', 3345.00, 1, 3345.00, 3345.00);
INSERT INTO `cmc_borrow_detail` VALUES (791, '1648881418861870978', '住宿成本', '人天', 80.00, 28, 2240.00, 2240.00);
INSERT INTO `cmc_borrow_detail` VALUES (792, '1648881418861870978', '用餐成本', '人天', 80.00, 28, 2240.00, 2240.00);
INSERT INTO `cmc_borrow_detail` VALUES (793, '1648881418861870978', '车辆加油费', '项', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (794, '1648881418861870978', '坐标转换', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (795, '1648881418861870978', '民工费', '人天', 200.00, 8, 1600.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (796, '1648881418861860977', '税金', '项', 96000.00, 1, 96000.00, 96000.00);
INSERT INTO `cmc_borrow_detail` VALUES (797, '1648881418861860977', '其他费用', '项', 100000.00, 1, 100000.00, 100000.00);
INSERT INTO `cmc_borrow_detail` VALUES (798, '1648881418861850976', '项目开支', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (799, '1648881418861850976', '资料整编', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (800, '1648881418861840975', '6月份两司机部分工资', '人', 6000.00, 2, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (801, '1648881418861840975', '6月份车辆维护、过路、燃油等费用', '辆', 2000.00, 4, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (802, '1648881418861840975', '6月份28人生活费用（函厨师工资）', '人天', 50.00, 840, 42000.00, 42000.00);
INSERT INTO `cmc_borrow_detail` VALUES (803, '1648881418861840975', '地表沉降孔钻设', '个', 50.00, 50, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (804, '1648881418861840975', '6月份办公耗材、监测点耗材', '项', 1000.00, 4, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (805, '1648881418861840975', '5月至7月江津房屋租金、押金、宽带、水电等费用', '季度', 8000.00, 1, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (806, '1648881418861840975', '5月份实习生学校管理费', '人', 100.00, 11, 1100.00, 1100.00);
INSERT INTO `cmc_borrow_detail` VALUES (807, '1648881418861840975', '江津新增打印机费用', '台', 1799.00, 1, 1799.00, 1799.00);
INSERT INTO `cmc_borrow_detail` VALUES (808, '1648881418861840975', '5月江津项目租车费用', '辆', 2700.00, 1, 2700.00, 2700.00);
INSERT INTO `cmc_borrow_detail` VALUES (809, '1648881418861840975', '水位计、测斜仪、读数仪等检定费用', '项', 2800.00, 1, 2800.00, 2800.00);
INSERT INTO `cmc_borrow_detail` VALUES (810, '1648881418861840975', '施工监测端午监理、三方商务费用', '项', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (811, '1648881418861830974', '招标网站会员费', '元', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (812, '1648881418861820973', '坐标转换费用', '元', 2400.00, 1, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (813, '1648881418861810972', '交通成本', '1', 70000.00, 1, 70000.00, 70000.00);
INSERT INTO `cmc_borrow_detail` VALUES (814, '1648881418861800971', '用餐成本', '项', 5680.00, 1, 5680.00, 5680.00);
INSERT INTO `cmc_borrow_detail` VALUES (815, '1648881418861800971', '租车', '元/天', 750.00, 14, 10500.00, 10500.00);
INSERT INTO `cmc_borrow_detail` VALUES (816, '1648881418861800971', '像控点标志制作', '个/元', 8.00, 170, 1360.00, 1360.00);
INSERT INTO `cmc_borrow_detail` VALUES (817, '1648881418861800971', '喷漆、钉子等', '项', 185.00, 1, 185.00, 185.00);
INSERT INTO `cmc_borrow_detail` VALUES (818, '1648881418861800971', '民工费', '人/天', 260.00, 8, 2080.00, 2080.00);
INSERT INTO `cmc_borrow_detail` VALUES (819, '1648881418861790970', '住宿费用', '间', 120.00, 9, 1080.00, 1080.00);
INSERT INTO `cmc_borrow_detail` VALUES (820, '1648881418861790970', '生活费用', '人天', 100.00, 15, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (821, '1648881418861790970', '车辆燃油及过路费', '项', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (822, '1648881418861790970', '民工费用', '人天', 200.00, 6, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (823, '1648881418861780969', '用餐成本', '人.天', 100.00, 150, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (824, '1648881418861780969', '租车及加油', '天.元', 750.00, 30, 22500.00, 22500.00);
INSERT INTO `cmc_borrow_detail` VALUES (825, '1648881418861780969', '返程机票', '人.元', 1800.00, 7, 12600.00, 12600.00);
INSERT INTO `cmc_borrow_detail` VALUES (826, '1648881418861780969', '办公用品及资料打印装订', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (827, '1648881418861770968', NULL, NULL, NULL, NULL, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (828, '1648881418861760967', '资料费用', '幅', 1500.00, 34, 51000.00, 51000.00);
INSERT INTO `cmc_borrow_detail` VALUES (829, '1648881418861750966', '用餐成本', '人天', 100.00, 14, 1400.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (830, '1648881418861750966', '住宿成本', '间/天', 120.00, 7, 840.00, 840.00);
INSERT INTO `cmc_borrow_detail` VALUES (831, '1648881418861750966', '租车', '辆/天', 800.00, 5, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (832, '1648881418861740965', '车辆加油费', '元', 500.00, 4, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (833, '1648881418861740965', '住宿成本', '元', 150.00, 30, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (834, '1648881418861740965', '用餐成本', '元', 270.00, 15, 4050.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (835, '1648881418861740965', '其它成本', '元', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (836, '1648881418861730964', '住宿成本', '元', 800.00, 1, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (837, '1648881418861730964', '车辆加油费', '元', 800.00, 1, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (838, '1648881418861730964', '用餐成本', '元', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (839, '1648881418861720963', '住宿成本', '人天', 100.00, 90, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (840, '1648881418861720963', '用餐成本', '人天', 100.00, 90, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (841, '1648881418861720963', '车辆加油费', '项', 1800.00, 1, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (842, '1648881418861710962', '护照', '人', 120.00, 8, 960.00, 960.00);
INSERT INTO `cmc_borrow_detail` VALUES (843, '1648881418861710962', '签证', '人', 500.00, 8, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (844, '1648881418861710962', '进出场机票（含中介做返程机票手续费）', '人', 2200.00, 16, 35200.00, 35200.00);
INSERT INTO `cmc_borrow_detail` VALUES (845, '1648881418861710962', '签证延期费3次', '项', 8400.00, 8, 67200.00, 67200.00);
INSERT INTO `cmc_borrow_detail` VALUES (846, '1648881418861710962', '境外意外保险', '人', 2000.00, 8, 16000.00, 16000.00);
INSERT INTO `cmc_borrow_detail` VALUES (847, '1648881418861710962', '中途回国', '人', 4000.00, 8, 32000.00, 32000.00);
INSERT INTO `cmc_borrow_detail` VALUES (848, '1648881418861710962', '设备托运', '项', 13000.00, 2, 26000.00, 26000.00);
INSERT INTO `cmc_borrow_detail` VALUES (849, '1648881418861710962', '设备入境罚款', '项', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (850, '1648881418861710962', '工作期间罚款', '人/天', 300.00, 8, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (851, '1648881418861710962', '民工', '月', 3000.00, 12, 36000.00, 36000.00);
INSERT INTO `cmc_borrow_detail` VALUES (852, '1648881418861710962', '租车2辆', '月', 12000.00, 8, 96000.00, 96000.00);
INSERT INTO `cmc_borrow_detail` VALUES (853, '1648881418861710962', '油费', '天', 150.00, 240, 36000.00, 36000.00);
INSERT INTO `cmc_borrow_detail` VALUES (854, '1648881418861710962', '住宿', '间', 128.00, 240, 30720.00, 30720.00);
INSERT INTO `cmc_borrow_detail` VALUES (855, '1648881418861710962', '餐饮', '人/天', 128.00, 600, 76800.00, 76800.00);
INSERT INTO `cmc_borrow_detail` VALUES (856, '1648881418861710962', '劳动保护用品、现场日常商务', '项', 5000.00, 2, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (857, '1648881418861700961', '资料费用', '幅', 1500.00, 52, 78000.00, 78000.00);
INSERT INTO `cmc_borrow_detail` VALUES (858, '1648881418861690960', '资料费用', '幅', 1350.00, 140, 189000.00, 189000.00);
INSERT INTO `cmc_borrow_detail` VALUES (859, '1648881418861680959', '住宿用餐成本', '人/天', 110.00, 56, 6160.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (860, '1648881418861680959', '交通成本', '车/天', 200.00, 28, 5600.00, 5600.00);
INSERT INTO `cmc_borrow_detail` VALUES (861, '1648881418861680959', '用工成本', '人/天', 260.00, 49, 12740.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (862, '1648881418861680959', '采样工具采购', '组', 600.00, 4, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (863, '1648881418861670958', '加油', '元/次', 375.00, 8, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (864, '1648881418861670958', '住宿', '280/天', 1.00, 10, 2800.00, 2800.00);
INSERT INTO `cmc_borrow_detail` VALUES (865, '1648881418861670958', '伙食', NULL, NULL, NULL, 4200.00, 4200.00);
INSERT INTO `cmc_borrow_detail` VALUES (866, '1648881418861660957', '接待物资购置', NULL, NULL, NULL, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (867, '1648881418861650956', '专利年费', '1', 600.00, 1, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (868, '1648881418861640955', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (869, '1648881418861640955', '二滩大坝水准月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (870, '1648881418861640955', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (871, '1648881418861640955', 'GNSS自动化设备维护', '人工', 120.00, 8, 960.00, 960.00);
INSERT INTO `cmc_borrow_detail` VALUES (872, '1648881418861640955', '车辆燃油及维修费', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (873, '1648881418861640955', '交通费用', '人次', 198.00, 8, 1584.00, 1584.00);
INSERT INTO `cmc_borrow_detail` VALUES (874, '1648881418861640955', '现场人员生活开支', '人天', 40.00, 120, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (875, '1648881418861630954', NULL, NULL, NULL, NULL, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (876, '1648881418861620953', '项目开支', '项', 3270.00, 1, 3270.00, 3270.00);
INSERT INTO `cmc_borrow_detail` VALUES (877, '1648881418861620953', '住宿成本', '人天', 80.00, 21, 1680.00, 1680.00);
INSERT INTO `cmc_borrow_detail` VALUES (878, '1648881418861620953', '用餐成本', '人天', 80.00, 21, 1680.00, 1680.00);
INSERT INTO `cmc_borrow_detail` VALUES (879, '1648881418861620953', '车辆加油费', '项', 1800.00, 1, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (880, '1648881418861610952', '办公设备购置', NULL, NULL, 3, 45000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (881, '1648881418861600951', '人员进出场', '1', 7000.00, 1, 7000.00, 7000.00);
INSERT INTO `cmc_borrow_detail` VALUES (882, '1648881418861600951', '生活费用', '1', 21600.00, 1, 21600.00, 21600.00);
INSERT INTO `cmc_borrow_detail` VALUES (883, '1648881418861600951', '住宿成本', '1', 18000.00, 1, 18000.00, 18000.00);
INSERT INTO `cmc_borrow_detail` VALUES (884, '1648881418861600951', '现场租车', '1', 12000.00, 1, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (885, '1648881418861600951', '民工成本', '1', 23760.00, 1, 23760.00, 15840.00);
INSERT INTO `cmc_borrow_detail` VALUES (886, '1648881418861600951', '临时用工意外伤害保险', '1', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (887, '1648881418861600951', '劳动及高原药品', '1', 3000.00, 1, 3000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (888, '1648881418861590950', '担保费', NULL, 1.00, 1, 20155.00, 20155.00);
INSERT INTO `cmc_borrow_detail` VALUES (889, '1648881418861580949', '接待费用', NULL, NULL, NULL, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (890, '1648881418861570948', '接待费用', NULL, NULL, NULL, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (891, '1648881418861560947', '住宿', '元', 120.00, 30, 3600.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (892, '1648881418861560947', '用餐', '元', 130.00, 30, 3900.00, 2600.00);
INSERT INTO `cmc_borrow_detail` VALUES (893, '1648881418861550946', '住宿成本', '元/天', 100.00, 560, 56000.00, 44200.00);
INSERT INTO `cmc_borrow_detail` VALUES (894, '1648881418861550946', '用餐成本', '元/天', 100.00, 560, 56000.00, 42000.00);
INSERT INTO `cmc_borrow_detail` VALUES (895, '1648881418861550946', '车辆加油费', '元/天', 150.00, 70, 10500.00, 8300.00);
INSERT INTO `cmc_borrow_detail` VALUES (896, '1648881418861550946', '用工成本', '元/天', 200.00, 20, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (897, '1648881418861550946', '购买控制点表芯', '项', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (898, '1648881418861540945', '住宿成本', '元', 100.00, 25, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (899, '1648881418861540945', '用餐成本', '元', 100.00, 25, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (900, '1648881418861540945', '车辆加油费', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (901, '1648881418861540945', '坐标转换费用', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (902, '1648881418861540945', '用工成本', '元', 200.00, 2, 400.00, 400.00);
INSERT INTO `cmc_borrow_detail` VALUES (903, '1648881418861530944', '住宿成本', '人天', 360.00, 11, 3960.00, 3960.00);
INSERT INTO `cmc_borrow_detail` VALUES (904, '1648881418861530944', '用餐成本', '人天', 400.00, 11, 4400.00, 4400.00);
INSERT INTO `cmc_borrow_detail` VALUES (905, '1648881418861530944', '车辆加油费', '项', 3000.00, 1, 3000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (906, '1648881418861520943', '5月份司机部分租金', '月', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (907, '1648881418861520943', '5月份车辆维护、过路、燃油费用', '月', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (908, '1648881418861520943', '5月份27人生活费用', '月', 45.00, 837, 37665.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (909, '1648881418861520943', '3、4表总方案协调费用', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (910, '1648881418861520943', '地面沉降孔钻孔协调费', '项', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (911, '1648881418861520943', '5月份办公耗材费用', '月', 1000.00, 4, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (912, '1648881418861520943', '35公里大网复测尾款', '项', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (913, '1648881418861520943', '4月至6月房屋租金', '季度', 9600.00, 1, 9600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (914, '1648881418861520943', '5月至10月房屋租金', '季度', 9600.00, 2, 19200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (915, '1648881418861510942', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (916, '1648881418861510942', '二滩大坝月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (917, '1648881418861510942', '内观人员月度固定工资', '月', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (918, '1648881418861510942', '车辆燃油及维修费', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (919, '1648881418861510942', '交通费用', '人次', 200.00, 10, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (920, '1648881418861510942', '现场人员生活开支', '人天', 40.00, 132, 5280.00, 5280.00);
INSERT INTO `cmc_borrow_detail` VALUES (921, '1648881418861510942', 'GNSS自动化设备维护', '人天', 120.00, 8, 960.00, 960.00);
INSERT INTO `cmc_borrow_detail` VALUES (922, '1648881418861500941', '拉萨空域办理费用', '1', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (923, '1648881418861500941', '住宿成本', '1', 200.00, 30, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (924, '1648881418861500941', '用餐成本', '1', 100.00, 38, 3800.00, 3800.00);
INSERT INTO `cmc_borrow_detail` VALUES (925, '1648881418861500941', '车辆加油费', '1', 300.00, 8, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (926, '1648881418861490940', '电信服务费用', '元', 330.95, 1, 331.00, 331.00);
INSERT INTO `cmc_borrow_detail` VALUES (927, '1648881418861490940', '电信服务费用', '元', 1536.15, 1, 1536.20, 1536.20);
INSERT INTO `cmc_borrow_detail` VALUES (928, '1648881418861480939', '车辆加油费', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (929, '1648881418861480939', '住宿成本', '人天', 100.00, 40, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (930, '1648881418861480939', '用餐成本', '人天', 100.00, 44, 4400.00, 4400.00);
INSERT INTO `cmc_borrow_detail` VALUES (931, '1648881418861480939', '高程转换模型转换费用', '1', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (932, '1648881418861470938', '静态数据解算及正常高转换费用', '项', 330.00, 1, 330.00, 330.00);
INSERT INTO `cmc_borrow_detail` VALUES (933, '1648881418861470938', '车辆加油费', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (934, '1648881418861470938', '住宿成本', '天', 360.00, 8, 2880.00, 2880.00);
INSERT INTO `cmc_borrow_detail` VALUES (935, '1648881418861470938', '用餐成本', '天', 300.00, 9, 2700.00, 2700.00);
INSERT INTO `cmc_borrow_detail` VALUES (936, '1648881418861460937', '补充借款', '项', 103600.00, 1, 103600.00, 103600.00);
INSERT INTO `cmc_borrow_detail` VALUES (937, '1648881418861460937', '住宿成本', '人天', 60.00, 208, 12480.00, 12480.00);
INSERT INTO `cmc_borrow_detail` VALUES (938, '1648881418861460937', '用餐成本', '人天', 100.00, 208, 20800.00, 20800.00);
INSERT INTO `cmc_borrow_detail` VALUES (939, '1648881418861460937', '车辆加油费', '项', 8000.00, 1, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (940, '1648881418861450936', '油费', '元', 300.00, 2, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (941, '1648881418861450936', '住宿', '元', 120.00, 6, 720.00, 720.00);
INSERT INTO `cmc_borrow_detail` VALUES (942, '1648881418861450936', '吃饭', '元', 100.00, 4, 400.00, 400.00);
INSERT INTO `cmc_borrow_detail` VALUES (943, '1648881418861440935', '中标服务费', '元', 14294.00, 1, 14294.00, 14294.00);
INSERT INTO `cmc_borrow_detail` VALUES (944, '1648881418861430934', '界桩制作、运输与埋设', '根', 280.00, 277, 77560.00, 77560.00);
INSERT INTO `cmc_borrow_detail` VALUES (945, '1648881418861430934', '临时木桩制作、埋设', '根', 25.00, 75, 1875.00, 1875.00);
INSERT INTO `cmc_borrow_detail` VALUES (946, '1648881418861430934', '青苗补偿', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (947, '1648881418861430934', '住宿成本', '人天', 60.00, 50, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (948, '1648881418861430934', '用餐成本', '人天', 80.00, 50, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (949, '1648881418861430934', '现场租车', '天', 500.00, 25, 12500.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (950, '1648881418861420933', '中标服务费', '元', 6253.00, 1, 6253.00, 6253.00);
INSERT INTO `cmc_borrow_detail` VALUES (951, '1648881418861410932', '项目成本', '项', 25000.00, 1, 25000.00, 25000.00);
INSERT INTO `cmc_borrow_detail` VALUES (952, '1648881418861410932', '住宿成本', '人天', 80.00, 90, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (953, '1648881418861410932', '车辆加油费', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (954, '1648881418861410932', '用餐成本', '人天', 100.00, 90, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (955, '1648881418861400931', '人员成本', NULL, NULL, NULL, 70000.00, 70000.00);
INSERT INTO `cmc_borrow_detail` VALUES (956, '1648881418861390930', '非项目生产借款', '项', 12300.00, 1, 12300.00, 12300.00);
INSERT INTO `cmc_borrow_detail` VALUES (957, '1648881418861380929', '招聘平台服务费', '元', 5680.00, 1, 5680.00, 5680.00);
INSERT INTO `cmc_borrow_detail` VALUES (958, '1648881418861370928', '车辆燃油及过路费', '项', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (959, '1648881418861370928', '住宿费用', '人.天', 150.00, 60, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (960, '1648881418861370928', '工作用餐费用', '人.天', 100.00, 80, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (961, '1648881418861370928', '墩标土建材料费', '个', 300.00, 5, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (962, '1648881418861370928', '土建工作工具及辅材', '项', 1200.00, 1, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (963, '1648881418861370928', '强制对中基座', '个', 450.00, 5, 2250.00, 2250.00);
INSERT INTO `cmc_borrow_detail` VALUES (964, '1648881418861370928', '用工成本', ' 人.天', 200.00, 40, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (965, '1648881418861370928', '民工意外伤害险', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (966, '1648881418861360927', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (967, '1648881418861360927', '二滩大坝月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (968, '1648881418861360927', '内观人员月度固定工资', '人天', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (969, '1648881418861360927', '车辆燃油费', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (970, '1648881418861360927', '交通费用', '人次', 200.00, 6, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (971, '1648881418861360927', '现场人员生活开支', '人天', 40.00, 100, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (972, '1648881418861360927', '疫情防控隔离费用', '天', 120.00, 18, 2160.00, 2160.00);
INSERT INTO `cmc_borrow_detail` VALUES (973, '1648881418861360927', '2023年民工保险费用', '人', 800.00, 11, 8800.00, 8800.00);
INSERT INTO `cmc_borrow_detail` VALUES (974, '1648881418861360927', '2023年民工体检费', '人', 200.00, 14, 2800.00, 2800.00);
INSERT INTO `cmc_borrow_detail` VALUES (975, '1648881418861350926', '车辆加油费', NULL, 1000.00, 2, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (976, '1648881418861350926', '用餐成本', NULL, 300.00, 9, 2700.00, 2700.00);
INSERT INTO `cmc_borrow_detail` VALUES (977, '1648881418861350926', '住宿成本', NULL, 300.00, 9, 2700.00, 2700.00);
INSERT INTO `cmc_borrow_detail` VALUES (978, '1648881418861350926', '坐标转换费用', NULL, 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (979, '1648881418861340925', '用餐成本', '人.天', 84.00, 28, 2352.00, 2352.00);
INSERT INTO `cmc_borrow_detail` VALUES (980, '1648881418861340925', '住宿成本', '人.天', 70.00, 28, 1960.00, 1960.00);
INSERT INTO `cmc_borrow_detail` VALUES (981, '1648881418861340925', '车辆加油费', '项', 2830.00, 1, 2830.00, 2830.00);
INSERT INTO `cmc_borrow_detail` VALUES (982, '1648881418861340925', '租车', '天.元', 1000.00, 4, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (983, '1648881418861330924', '其它成本', NULL, 10000.00, 5, 50000.00, 50000.00);
INSERT INTO `cmc_borrow_detail` VALUES (984, '1648881418861320923', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (985, '1648881418861320923', '二滩大坝水准月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (986, '1648881418861320923', '二滩大坝平面季度观测民工费', '人天', 120.00, 40, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (987, '1648881418861320923', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (988, '1648881418861320923', '车辆燃油及维修费', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (989, '1648881418861320923', '交通费用', '人次', 200.00, 8, 1600.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (990, '1648881418861320923', '现场人员生活开支', '人天', 40.00, 120, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (991, '1648881418861310922', '住宿费用', '间', 120.00, 30, 3600.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (992, '1648881418861310922', '生活费用', '人天', 100.00, 45, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (993, '1648881418861310922', '车辆燃油及过路费', '项', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (994, '1648881418861310922', '民工费用', '人天', 200.00, 20, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (995, '1648881418861310922', '测量点新建材料费用', '点', 200.00, 16, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (996, '1648881418861310922', '测量点修补维护费用', '点', 80.00, 23, 1840.00, 1840.00);
INSERT INTO `cmc_borrow_detail` VALUES (997, '1648881418861300921', '车辆加油费', '元', 500.00, 4, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (998, '1648881418861300921', '住宿', '元', 150.00, 16, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (999, '1648881418861300921', '用餐', '元', 80.00, 32, 2560.00, 2560.00);
INSERT INTO `cmc_borrow_detail` VALUES (1000, '1648881418861290920', 'SCCORS中心正常计算费用', '项', 330.00, 1, 330.00, 330.00);
INSERT INTO `cmc_borrow_detail` VALUES (1001, '1648881418861290920', '车辆加油费', '项', 600.00, 1, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1002, '1648881418861290920', '用餐成本', '人天', 50.00, 8, 400.00, 400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1003, '1648881418861290920', '住宿成本', '人天', 80.00, 8, 640.00, 640.00);
INSERT INTO `cmc_borrow_detail` VALUES (1004, '1648881418861280919', '住宿成本', '人天', 80.00, 60, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1005, '1648881418861280919', '用餐成本', '人天', 80.00, 60, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1006, '1648881418861280919', '车辆加油费', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1007, '1648881418861270918', '保险费', NULL, NULL, NULL, 644.93, 644.93);
INSERT INTO `cmc_borrow_detail` VALUES (1008, '1648881418861260917', '交通成本', '人次', 500.00, 4, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1009, '1648881418861260917', '住宿成本', '人天', 160.00, 10, 1600.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1010, '1648881418861260917', '用餐成本', '人天', 150.00, 10, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1011, '1648881418861250916', '住宿成本', '元', 300.00, 6, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1012, '1648881418861250916', '用餐成本', '元', 300.00, 6, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1013, '1648881418861250916', '车辆加油费', '元', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1014, '1648881418861250916', '坐标转换费用', '元', 600.00, 1, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1015, '1648881418861240915', '档案资料出版、装订', '1', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1016, '1648881418861240915', '项目交流及工作餐', '1', 12000.00, 1, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1017, '1648881418861240915', '进出场交通费', '1', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1018, '1648881418861230914', '住宿成本', '人天', 80.00, 87, 6960.00, 5220.00);
INSERT INTO `cmc_borrow_detail` VALUES (1019, '1648881418861230914', '用餐成本', '人天', 80.00, 87, 6960.00, 5220.00);
INSERT INTO `cmc_borrow_detail` VALUES (1020, '1648881418861230914', '坐标转换', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1021, '1648881418861230914', '民工费', '人天', 200.00, 10, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1022, '1648881418861230914', '车辆加油费', '项', 2500.00, 1, 2500.00, 2520.00);
INSERT INTO `cmc_borrow_detail` VALUES (1023, '1648881418861220913', '专家评审费', NULL, NULL, NULL, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1024, '1648881418861210912', '电信服务费用', '元', 737.41, 1, 737.41, 737.41);
INSERT INTO `cmc_borrow_detail` VALUES (1025, '1648881418861210912', '电信服务费用', '元', 330.88, 1, 330.88, 330.88);
INSERT INTO `cmc_borrow_detail` VALUES (1026, '1648881418861200911', NULL, NULL, NULL, NULL, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1027, '1648881418861190910', '5月份两司机部分工资', '月', 6000.00, 2, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1028, '1648881418861190910', '5月份车辆维护、过路、燃油等费用', '月', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1029, '1648881418861190910', '5月份28人生活费用（函厨师工资）', '人/天', 45.00, 868, 39060.00, 39060.00);
INSERT INTO `cmc_borrow_detail` VALUES (1030, '1648881418861190910', '总体方案协调费用', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1031, '1648881418861190910', '地表沉降孔路面钻设协调费用', '项目', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1032, '1648881418861190910', '5月份办公耗材、监测点耗材', '月', 1000.00, 4, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1033, '1648881418861190910', '35公里2等水准大网复测劳务尾款', '项', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1034, '1648881418861190910', '4月至6月第二套房屋租金', '季度', 9600.00, 1, 9600.00, 9600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1035, '1648881418861190910', '5月至10月第三套房屋租金', '季度', 9600.00, 2, 19200.00, 19200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1036, '1648881418861190910', '3、4月份实习生学校管理费', '月', 900.00, 2, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1037, '1648881418861180909', '资料费用', '幅', 1275.00, 5, 6375.00, 6375.00);
INSERT INTO `cmc_borrow_detail` VALUES (1038, '1648881418861170908', '中标服务费', '元', 53996.15, 1, 53996.20, 53996.20);
INSERT INTO `cmc_borrow_detail` VALUES (1039, '1648881418861160907', '车辆加油费', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1040, '1648881418861160907', '住宿成本', '人天', 100.00, 80, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1041, '1648881418861160907', '用餐成本', '人天', 100.00, 80, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1042, '1648881418861150906', '审查成本', '1', 17000.00, 1, 17000.00, 17000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1043, '1648881418861140905', '项目执行费用', '元', NULL, NULL, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1044, '1648881418861140905', '钻探进出场费用', '元', NULL, NULL, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1045, '1648881418861130904', '档案袋', '个', 0.45, 64000, 28800.00, 28800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1046, '1648881418861130904', '档案袋运费', NULL, NULL, NULL, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1047, '1648881418861130904', '用餐成本', NULL, 60.00, 120, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1048, '1648881418861130904', '车辆', NULL, NULL, NULL, 5837.00, 5837.00);
INSERT INTO `cmc_borrow_detail` VALUES (1049, '1648881418861130904', '耗材成本', NULL, NULL, NULL, 29800.00, 29800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1050, '1648881418861130904', '打印机押金', NULL, NULL, NULL, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1051, '1648881418861130904', '水电', NULL, NULL, NULL, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1052, '1648881418861120903', '保险费', NULL, NULL, NULL, 681.09, 681.09);
INSERT INTO `cmc_borrow_detail` VALUES (1053, '1648881418861110902', '中标服务费', '元', 10650.00, 1, 10650.00, 10650.00);
INSERT INTO `cmc_borrow_detail` VALUES (1054, '1648881418861100901', '项目成本', NULL, 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1055, '1648881418861090900', '不动产证书工本费', '本', 2.85, 15500, 44175.00, 44175.00);
INSERT INTO `cmc_borrow_detail` VALUES (1056, '1648881418861080899', '动态监测', '个', 24.50, 86, 2107.00, 2107.00);
INSERT INTO `cmc_borrow_detail` VALUES (1057, '1648881418861080899', '耕地恢复', '个', 28.00, 2639, 73892.00, 73892.00);
INSERT INTO `cmc_borrow_detail` VALUES (1058, '1648881418861070898', '用餐成本', '人.天', 80.00, 15, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1059, '1648881418861070898', '住宿成本', '人.天', 100.00, 15, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1060, '1648881418861070898', '租皮卡车', '元.天', 500.00, 5, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1061, '1648881418861070898', '车辆加油费', '元.天', 200.00, 5, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1062, '1648881418861060897', '电信服务费用', '元', NULL, 1, 1739.23, 1739.23);
INSERT INTO `cmc_borrow_detail` VALUES (1063, '1648881418861060897', '电信服务费用', '元', NULL, 1, 300.12, 300.12);
INSERT INTO `cmc_borrow_detail` VALUES (1064, '1648881418861050896', '桐子林月度观测民工费', '人工', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1065, '1648881418861050896', '二滩大坝月度观测民工费', '人工', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (1066, '1648881418861050896', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1067, '1648881418861050896', '车辆燃油及维修费', '项', 4116.00, 1, 4116.00, 4116.00);
INSERT INTO `cmc_borrow_detail` VALUES (1068, '1648881418861050896', '交通费用', '人次', 200.00, 10, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1069, '1648881418861050896', '现场人员生活开支', '人天', 40.00, 132, 5280.00, 5280.00);
INSERT INTO `cmc_borrow_detail` VALUES (1070, '1648881418861050896', 'GNSS高精度三维监测试验', '人工', 10.00, 120, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1071, '1648881418861040895', '用餐成本', '人天', 100.00, 300, 30000.00, 11960.00);
INSERT INTO `cmc_borrow_detail` VALUES (1072, '1648881418861040895', '住宿成本', '人天', 80.00, 300, 24000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1073, '1648881418861040895', '用工成本', '人天', 250.00, 120, 30000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (1074, '1648881418861040895', '租船', '天', 1000.00, 45, 45000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (1075, '1648881418861040895', '土建材料采购', '点', 520.00, 40, 20800.00, 20800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1076, '1648881418861040895', '车辆加油费', '项', 12000.00, 1, 12000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1077, '1648881418861040895', '标志采购（定制）', '项', 12.00, 520, 6240.00, 3240.00);
INSERT INTO `cmc_borrow_detail` VALUES (1078, '1648881418861040895', '安全措施费', '项', 1.00, 1000, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1079, '1648881418861030894', '车辆加油费', '项', 480.00, 1, 480.00, 480.00);
INSERT INTO `cmc_borrow_detail` VALUES (1080, '1648881418861030894', '住宿成本', '人天', 160.00, 3, 480.00, 480.00);
INSERT INTO `cmc_borrow_detail` VALUES (1081, '1648881418861030894', '用餐成本', '人天', 189.00, 4, 756.00, 756.00);
INSERT INTO `cmc_borrow_detail` VALUES (1082, '1648881418861020893', 'sczsck02', '1', 6400.00, 1, 6400.00, 6400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1083, '1648881418861020893', 'sczsck03', '1', 6400.00, 1, 6400.00, 6400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1084, '1648881418861010892', '保险费', NULL, NULL, NULL, 687.13, 687.13);
INSERT INTO `cmc_borrow_detail` VALUES (1085, '1648881418861000891', '电信服务费用', '元', NULL, NULL, 1750.67, 1750.67);
INSERT INTO `cmc_borrow_detail` VALUES (1086, '1648881418861000891', '电信服务费用', '元', NULL, NULL, 299.00, 299.00);
INSERT INTO `cmc_borrow_detail` VALUES (1087, '1648881418860990890', '标书购买费', '元', 200.00, 1, 200.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1088, '1648881418860980889', '资料费用', '幅', 1500.00, 14, 21000.00, 21000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1089, '1648881418860970888', '担保费', '1', 30000.00, 1, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1090, '1648881418860960887', '车辆加油费', '元', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1091, '1648881418860960887', '测绘局坐标转换', '元', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1092, '1648881418860960887', '吃饭', '元', 130.00, 15, 1950.00, 1950.00);
INSERT INTO `cmc_borrow_detail` VALUES (1093, '1648881418860960887', '住宿', '元', 150.00, 10, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1094, '1648881418860950886', '项目成本', '1', 585.00, 1, 585.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1095, '1648881418860940885', '项目成本', '1', 518.00, 1, 518.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1096, '1648881418860930884', '商务成本', NULL, NULL, NULL, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1097, '1648881418860920883', '住宿成本', '1', 150.00, 18, 2700.00, 2700.00);
INSERT INTO `cmc_borrow_detail` VALUES (1098, '1648881418860920883', '用餐成本', '1', 100.00, 18, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1099, '1648881418860920883', '机票', '1', 1000.00, 2, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1100, '1648881418860920883', '设备托运', '1', 1500.00, 2, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1101, '1648881418860910882', '四月份司机部分工资', '月', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1102, '1648881418860910882', '四月份三辆车油、过路、修理等费用', '月', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1103, '1648881418860910882', '四月份25人生活费用（函厨师工资）', '人天', 45.00, 775, 34875.00, 34875.00);
INSERT INTO `cmc_borrow_detail` VALUES (1104, '1648881418860910882', '地面沉降孔土建费用', '项', 50.00, 628, 31400.00, 31400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1105, '1648881418860910882', '3月至5月现场1套房租金', '季度', 9600.00, 1, 9600.00, 9600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1106, '1648881418860910882', '四月份3个项目办公耗材', '月', 1000.00, 3, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1107, '1648881418860910882', '特种登高车租用费', '天', 1600.00, 1, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1108, '1648881418860910882', '大网复测外协费用（预估）', '项', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1109, '1648881418860910882', '四月份金杯车租金', '月', 3200.00, 1, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1110, '1648881418860900881', '住宿成本', NULL, NULL, NULL, 50000.00, 50000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1111, '1648881418860890880', NULL, NULL, NULL, NULL, 50000.00, 50000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1112, '1648881418860880879', '学会、协会会费', '1', 13000.00, 1, 13000.00, 13000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1113, '1648881418860870878', '培训费', '元', 680.00, 2, 1360.00, 1360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1114, '1648881418860860877', '发电机、电锤、角磨机、线缆', '元', 2280.00, 1, 2280.00, 2280.00);
INSERT INTO `cmc_borrow_detail` VALUES (1115, '1648881418860860877', '测量标志', '元', 0.80, 400, 320.00, 320.00);
INSERT INTO `cmc_borrow_detail` VALUES (1116, '1648881418860860877', '反射片标志', '元', 1.50, 800, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1117, '1648881418860860877', '实习人员工资', '元', 390.00, 2, 780.00, 780.00);
INSERT INTO `cmc_borrow_detail` VALUES (1118, '1648881418860860877', '新招项目经理预发工资', '元', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1119, '1648881418860860877', '司机部分工资', '元', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1120, '1648881418860860877', '土建1、2、5标商务费用', '元', 7000.00, 1, 7000.00, 7000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1121, '1648881418860860877', '新到实习生，生活用品费', '元', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1122, '1648881418860860877', '金杯车租金', '元', 3200.00, 1, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1123, '1648881418860860877', '3辆车燃油、停车、过路、保养等费用', '元', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1124, '1648881418860860877', '生活费用', '元', 35000.00, 1, 35000.00, 35000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1125, '1648881418860860877', '地面沉降孔土建费用', '元', 50.00, 300, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1126, '1648881418860860877', '蒸饭箱', '元', 1600.00, 1, 1600.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1127, '1648881418860860877', '办公耗材', '元', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1128, '1648881418860850876', '办公物资购买、对内、对外接待', NULL, NULL, NULL, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1129, '1648881418860840875', '用餐成本', '人.天', 80.00, 30, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1130, '1648881418860840875', '住宿成本', '人.天', 70.00, 30, 2100.00, 2100.00);
INSERT INTO `cmc_borrow_detail` VALUES (1131, '1648881418860840875', '车辆加油费', '元.天', 150.00, 10, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1132, '1648881418860830874', '住宿成本', '1', 200.00, 32, 6400.00, 6400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1133, '1648881418860830874', '用餐成本', '1', 100.00, 58, 5800.00, 5800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1134, '1648881418860830874', '交通成本', '1', 200.00, 20, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1135, '1648881418860830874', '车辆加油费', '1', 300.00, 6, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1136, '1648881418860820873', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1137, '1648881418860820873', '二滩大坝水准月度观测民工费', '人天', 120.00, 56, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (1138, '1648881418860820873', '二滩大坝平面季度观测民工费', '人天', 120.00, 40, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1139, '1648881418860820873', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1140, '1648881418860820873', 'GNSS自动化设备维护', '人天', 120.00, 8, 960.00, 960.00);
INSERT INTO `cmc_borrow_detail` VALUES (1141, '1648881418860820873', '车辆燃油及维修费', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1142, '1648881418860820873', '交通费用', '人次', 198.00, 8, 1584.00, 1584.00);
INSERT INTO `cmc_borrow_detail` VALUES (1143, '1648881418860820873', '现场人员生活开支', '人天', 40.00, 120, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1144, '1648881418860810872', '中标服务费', '元', 7000.00, 1, 7000.00, 7000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1145, '1648881418860800871', '材料整理制作费', '份', 2450.00, 1, 2450.00, 2450.00);
INSERT INTO `cmc_borrow_detail` VALUES (1146, '1648881418860790870', '项目前期经费', '元', 30000.00, 1, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1147, '1648881418860780869', '文件材料整理制作费', '1', 5250.00, 1, 5250.00, 5250.00);
INSERT INTO `cmc_borrow_detail` VALUES (1148, '1648881418860770868', '平台服务费', '元', 1280.00, 1, 1280.00, 1280.00);
INSERT INTO `cmc_borrow_detail` VALUES (1149, '1648881418860760867', '车辆加油费', '元', 500.00, 6, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1150, '1648881418860760867', '住宿', '元', 160.00, 20, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1151, '1648881418860760867', '现场开销', '元', 400.00, 10, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1152, '1648881418860750866', '用餐成本', '人天', 80.00, 27, 2160.00, 2160.00);
INSERT INTO `cmc_borrow_detail` VALUES (1153, '1648881418860750866', '住宿成本', '人天', 100.00, 27, 2700.00, 2700.00);
INSERT INTO `cmc_borrow_detail` VALUES (1154, '1648881418860750866', '租船', '项', 800.00, 1, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1155, '1648881418860750866', '车辆加油费', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1156, '1648881418860740865', '培训', NULL, NULL, NULL, 2950.00, 2950.00);
INSERT INTO `cmc_borrow_detail` VALUES (1157, '1648881418860730864', '培训费', '元', 680.00, 1, 680.00, 680.00);
INSERT INTO `cmc_borrow_detail` VALUES (1158, '1648881418860720863', '见附件1', '元', 11331.89, 1, 11331.90, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1159, '1648881418860710862', '学会、协会会费', '1', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1160, '1648881418860700861', '用餐成本', '人.天', 80.00, 35, 2800.00, 2800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1161, '1648881418860700861', '住宿成本', '人.天', 80.00, 35, 2800.00, 2800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1162, '1648881418860700861', '购买移动CORS费用', '天.元', 30.00, 12, 360.00, 360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1163, '1648881418860690860', '卫星影像采购费用', '元', 30000.00, 1, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1164, '1648881418860680859', '车辆加油费', '元', 500.00, 5, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1165, '1648881418860680859', '用餐', '元', 120.00, 40, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1166, '1648881418860680859', '住宿', '元', 150.00, 18, 2700.00, 2700.00);
INSERT INTO `cmc_borrow_detail` VALUES (1167, '1648881418860670858', '住宿成本', '天', 350.00, 14, 4900.00, 4900.00);
INSERT INTO `cmc_borrow_detail` VALUES (1168, '1648881418860670858', '交通成本', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1169, '1648881418860670858', '租车', '天', 800.00, 12, 9600.00, 9600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1170, '1648881418860670858', '用餐成本', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1171, '1648881418860660857', '中标服务费', '元', 83975.90, 1, 83975.90, 83975.90);
INSERT INTO `cmc_borrow_detail` VALUES (1172, '1648881418860650856', '用餐成本', '人/天', 100.00, 1560, 156000.00, 78000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1173, '1648881418860650856', '住宿成本', '人/天', 100.00, 1560, 156000.00, 78000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1174, '1648881418860650856', '临时租车', '天.元', 800.00, 60, 48000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1175, '1648881418860650856', '药品、办公用品及劳保用品采购', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1176, '1648881418860650856', '往返轮休机票费用', '人.次', 1800.00, 20, 36000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1177, '1648881418860650856', '返程机票费用', '人/元', 1800.00, 30, 54000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1178, '1648881418860650856', '其它零星开支', '项', 10000.00, 1, 10000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1179, '1648881418860640855', '材料费、人工分', '元', 3500.00, 1, 3500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1180, '1648881418860640855', '20230423商务接待费用', '元', 1140.00, 1, 1140.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1181, '1648881418860630854', '人员进出场', '项', 1500.00, 3, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1182, '1648881418860630854', '生活费用', '人天', 120.00, 90, 10800.00, 10800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1183, '1648881418860630854', '住宿成本', '人天', 180.00, 60, 10800.00, 10800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1184, '1648881418860630854', '现场租车', '天', 400.00, 28, 11200.00, 11200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1185, '1648881418860630854', '民工费', '人天', 260.00, 50, 13000.00, 13000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1186, '1648881418860630854', '高原药品采购', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1187, '1648881418860620853', '住宿成本', NULL, NULL, NULL, 35000.00, 35000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1188, '1648881418860610852', '车辆加油费', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1189, '1648881418860610852', '住宿', '人天', 80.00, 80, 6400.00, 6400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1190, '1648881418860610852', '用工', '人天', 400.00, 10, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1191, '1648881418860610852', '用餐', '人天', 100.00, 80, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1192, '1648881418860600851', '自然资源部大地测量数据处理中心正常计算费用', '1', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1193, '1648881418860590850', '学会、协会会费', '1', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1194, '1648881418860580849', '用餐', '元', 100.00, 27, 2700.00, 2700.00);
INSERT INTO `cmc_borrow_detail` VALUES (1195, '1648881418860580849', '住宿', '元', 120.00, 16, 1920.00, 1920.00);
INSERT INTO `cmc_borrow_detail` VALUES (1196, '1648881418860580849', '车辆加油费', '元', 500.00, 3, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1197, '1648881418860570848', '培训费', NULL, NULL, NULL, 16100.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1198, '1648881418860560847', '住宿成本', '人天', 60.00, 48, 2880.00, 2880.00);
INSERT INTO `cmc_borrow_detail` VALUES (1199, '1648881418860560847', '用餐成本', '人天', 80.00, 48, 3840.00, 3840.00);
INSERT INTO `cmc_borrow_detail` VALUES (1200, '1648881418860560847', '车辆加油费', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1201, '1648881418860550846', 'SCCORS中心正常计算费用', '1', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1202, '1648881418860540845', '用餐成本', '人.天', 70.00, 18, 1260.00, 1260.00);
INSERT INTO `cmc_borrow_detail` VALUES (1203, '1648881418860540845', '住宿成本', '人.天', 70.00, 18, 1260.00, 1260.00);
INSERT INTO `cmc_borrow_detail` VALUES (1204, '1648881418860540845', '租车（含油费）', '元.天', 750.00, 6, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1205, '1648881418860530844', '项目成本', '元', 1275.00, 22, 28050.00, 28050.00);
INSERT INTO `cmc_borrow_detail` VALUES (1206, '1648881418860520843', '其它成本', '元', 10000.00, 3, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1207, '1648881418860510842', '车辆加油费', '项', 915.00, 1, 915.00, 915.00);
INSERT INTO `cmc_borrow_detail` VALUES (1208, '1648881418860510842', '住宿成本', '人天', 214.00, 3, 642.00, 642.00);
INSERT INTO `cmc_borrow_detail` VALUES (1209, '1648881418860510842', '用餐成本', '人天', 225.00, 3, 675.00, 675.00);
INSERT INTO `cmc_borrow_detail` VALUES (1210, '1648881418860500841', '外包劳务成本', NULL, NULL, NULL, 8200.00, 8200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1211, '1648881418860500841', '租房', NULL, NULL, NULL, 6722.00, 6722.00);
INSERT INTO `cmc_borrow_detail` VALUES (1212, '1648881418860500841', '物业', NULL, NULL, NULL, 1680.00, 1680.00);
INSERT INTO `cmc_borrow_detail` VALUES (1213, '1648881418860490840', '动态监测原尾款30%', '个', 10.50, 86, 903.00, 903.00);
INSERT INTO `cmc_borrow_detail` VALUES (1214, '1648881418860490840', '动态监测新增全款', '个', 35.00, 161, 5635.00, 5635.00);
INSERT INTO `cmc_borrow_detail` VALUES (1215, '1648881418860490840', '耕地恢复原尾款30%', '个', 12.00, 2639, 31668.00, 31668.00);
INSERT INTO `cmc_borrow_detail` VALUES (1216, '1648881418860490840', '耕地恢复新增全款', '个', 40.00, 436, 17440.00, 17440.00);
INSERT INTO `cmc_borrow_detail` VALUES (1217, '1648881418860490840', '年度变更', '个', 21.00, 2100, 44100.00, 44100.00);
INSERT INTO `cmc_borrow_detail` VALUES (1218, '1648881418860480839', '补充借款', '项', 11638.86, 1, 11638.90, 11638.90);
INSERT INTO `cmc_borrow_detail` VALUES (1219, '1648881418860480839', '用餐成本', '人天', 80.00, 15, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1220, '1648881418860480839', '住宿成本', '人天', 60.00, 15, 900.00, 900.00);
INSERT INTO `cmc_borrow_detail` VALUES (1221, '1648881418860480839', '车辆成本', '项', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1222, '1648881418860480839', '广告制作', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1223, '1648881418860470838', NULL, NULL, NULL, NULL, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1224, '1648881418860460837', '标书购买费', '元', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1225, '1648881418860450836', '住宿成本', '天', 300.00, 30, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1226, '1648881418860450836', '租车', '天', 600.00, 20, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1227, '1648881418860450836', '用餐成本', '天', 540.00, 30, 16200.00, 16200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1228, '1648881418860450836', '用工成本', '天', 1440.00, 18, 25920.00, 25920.00);
INSERT INTO `cmc_borrow_detail` VALUES (1229, '1648881418860450836', '墩标建造材料', '座', 1000.00, 6, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1230, '1648881418860440835', '用餐成本', '人.天', 65.00, 50, 3250.00, 3250.00);
INSERT INTO `cmc_borrow_detail` VALUES (1231, '1648881418860440835', '住宿成本', '人.天', 70.00, 50, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1232, '1648881418860440835', '车辆加油费', '天.元', 150.00, 20, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1233, '1648881418860440835', 'SCCORS中心正常计算费用', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1234, '1648881418860440835', '埋点工具与材料', '项', 100.00, 1, 100.00, 100.00);
INSERT INTO `cmc_borrow_detail` VALUES (1235, '1648881418860430834', '航片采购费', '元', 15000.00, 1, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1236, '1648881418860420833', '车辆购置', NULL, 29000.00, 1, 29000.00, 29000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1237, '1648881418860420833', '用餐支出', '天', 100.00, 40, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1238, '1648881418860420833', '现场沟通支出', NULL, 3000.00, 5, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1239, '1648881418860420833', '水电', NULL, NULL, NULL, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1240, '1648881418860420833', '车辆加油费', NULL, NULL, NULL, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1241, '1648881418860420833', '耗材支出', NULL, NULL, NULL, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1242, '1648881418860420833', '其它支出', NULL, NULL, NULL, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1243, '1648881418860420833', '前期超出', NULL, NULL, NULL, 23478.74, 23478.74);
INSERT INTO `cmc_borrow_detail` VALUES (1244, '1648881418860410832', '住宿成本', '人天', 180.00, 14, 2520.00, 2520.00);
INSERT INTO `cmc_borrow_detail` VALUES (1245, '1648881418860410832', '用餐成本', '人天', 150.00, 14, 2100.00, 2100.00);
INSERT INTO `cmc_borrow_detail` VALUES (1246, '1648881418860410832', '返程机票', '人', 3000.00, 2, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1247, '1648881418860410832', '静态数据解算及正常高转换费用', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1248, '1648881418860410832', '其它成本', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1249, '1648881418860400831', '第三者责任险（50万）', '元', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1250, '1648881418860400831', '机身险', '元', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1251, '1648881418860390830', '房租费', '月', 1000.00, 6, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1252, '1648881418860390830', '交通费', NULL, NULL, NULL, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1253, '1648881418860390830', '用餐费', '人天', 50.00, 80, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1254, '1648881418860390830', '商务费用', NULL, NULL, NULL, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1255, '1648881418860390830', '电脑费用', '台套', 1000.00, 10, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1256, '1648881418860390830', '扫描仪费用', '台套', 1000.00, 15, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1257, '1648881418860380829', '用餐成本', '人.天', 80.00, 60, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1258, '1648881418860380829', '住宿成本', '人.天', 60.00, 60, 3600.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1259, '1648881418860380829', '车辆加油费', '元.天', 150.00, 15, 2250.00, 2250.00);
INSERT INTO `cmc_borrow_detail` VALUES (1260, '1648881418860380829', 'SCCORS中心正常计算费用', '次.元', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1261, '1648881418860380829', '千寻网络RTK单日账号', '天.元', 18.00, 15, 270.00, 270.00);
INSERT INTO `cmc_borrow_detail` VALUES (1262, '1648881418860370828', '其它成本', '元', 1737.31, 1, 1737.31, 1737.31);
INSERT INTO `cmc_borrow_detail` VALUES (1263, '1648881418860370828', '其它成本', '元', 309.00, 1, 309.00, 309.00);
INSERT INTO `cmc_borrow_detail` VALUES (1264, '1648881418860360827', '专家评审费', NULL, 1600.00, 7, 11200.00, 11200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1265, '1648881418860350826', '用餐', '人月', 1500.00, 6, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1266, '1648881418860350826', '车辆加油费', NULL, NULL, NULL, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1267, '1648881418860350826', '用工费用', '人月', 3000.00, 30, 90000.00, 90000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1268, '1648881418860340825', '补充借款', '项', 1397.50, 1, 1397.50, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1269, '1648881418860330824', '用餐成本', '人天', 100.00, 40, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1270, '1648881418860330824', '住宿成本', '人天', 80.00, 40, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1271, '1648881418860330824', '车辆加油费', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1272, '1648881418860330824', '坐标转换', '项', 1000.00, 1, 1000.00, 2527.00);
INSERT INTO `cmc_borrow_detail` VALUES (1273, '1648881418860320823', '其它成本', '1', 10000.00, 2, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1274, '1648881418860310822', '用餐成本', '人天', 80.00, 180, 14400.00, 14400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1275, '1648881418860310822', '住宿成本', '人天', 60.00, 176, 10560.00, 10560.00);
INSERT INTO `cmc_borrow_detail` VALUES (1276, '1648881418860310822', '租船', '天', 700.00, 30, 21000.00, 21000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1277, '1648881418860310822', '民工', '人天', 150.00, 60, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1278, '1648881418860310822', '交通成本', '项', 2800.00, 1, 2800.00, 2800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1279, '1648881418860300821', '代垫个税', '1', 337145.95, 1, 337146.00, 337146.00);
INSERT INTO `cmc_borrow_detail` VALUES (1280, '1648881418860290820', '用餐成本', '人.天', 80.00, 21, 1680.00, 1680.00);
INSERT INTO `cmc_borrow_detail` VALUES (1281, '1648881418860290820', '住宿成本', '人.天', 70.00, 18, 1260.00, 1260.00);
INSERT INTO `cmc_borrow_detail` VALUES (1282, '1648881418860290820', '车辆加油费', '天.元', 200.00, 7, 1400.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1283, '1648881418860280819', '用餐成本', '人天', 150.00, 20, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1284, '1648881418860280819', '住宿成本', '人天', 150.00, 20, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1285, '1648881418860280819', '机票', '人', 700.00, 2, 1400.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1286, '1648881418860280819', '返程机票', '人', 700.00, 2, 1400.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1287, '1648881418860280819', '租车', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1288, '1648881418860280819', '其它成本', '项', 400.00, 2, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1289, '1648881418860270818', '用餐成本', '人.天', 100.00, 188, 18800.00, 18800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1290, '1648881418860270818', '住宿成本', '人.天', 80.00, 188, 15040.00, 15040.00);
INSERT INTO `cmc_borrow_detail` VALUES (1291, '1648881418860270818', '进出场机票', '人.元', 4000.00, 4, 16000.00, 16000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1292, '1648881418860270818', '现场租车', '天.元', 750.00, 40, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1293, '1648881418860270818', '用工', '人.天', 320.00, 160, 51200.00, 51200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1294, '1648881418860270818', '指示碑、保护盖制作材料费', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1295, '1648881418860260817', '住宿成本', '人天', 80.00, 63, 5040.00, 5040.00);
INSERT INTO `cmc_borrow_detail` VALUES (1296, '1648881418860260817', '用餐成本', '人天', 80.00, 63, 5040.00, 5040.00);
INSERT INTO `cmc_borrow_detail` VALUES (1297, '1648881418860260817', '车辆加油费', '项', 2520.00, 1, 2520.00, 2520.00);
INSERT INTO `cmc_borrow_detail` VALUES (1298, '1648881418860260817', '民工', '人天', 200.00, 7, 1400.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1299, '1648881418860250816', '用餐成本', '人/天', 120.00, 1920, 230400.00, 153600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1300, '1648881418860250816', '住宿成本', '人/天', 100.00, 1920, 192000.00, 153600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1301, '1648881418860250816', '往返机票', '人/元', 1900.00, 64, 121600.00, 60800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1302, '1648881418860250816', '临时租车', '天/元', 500.00, 20, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1303, '1648881418860250816', '药品、办公用品及劳保用品采购费用', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1304, '1648881418860250816', '作业组每月商务费用', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1305, '1648881418860250816', '实习学生保险', '人/员', 200.00, 15, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1306, '1648881418860240815', '住宿成本', '元', 260.00, 60, 15600.00, 15600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1307, '1648881418860240815', '租车', '元', 650.00, 40, 26000.00, 26000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1308, '1648881418860240815', '用餐成本', '元', 120.00, 60, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1309, '1648881418860240815', '用工成本', '元', 1800.00, 30, 54000.00, 54000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1310, '1648881418860240815', '专家评审费', '元', 1200.00, 7, 8400.00, 8400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1311, '1648881418860240815', '规划咨询', '元', 1800.00, 7, 12600.00, 12600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1312, '1648881418860240815', '机票', '元', 3800.00, 3, 11400.00, 11400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1313, '1648881418860230814', '用餐成本', '人天', 80.00, 80, 6400.00, 6400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1314, '1648881418860230814', '住宿成本', '人天', 80.00, 80, 6400.00, 6400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1315, '1648881418860230814', '租船', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1316, '1648881418860230814', '车辆加油费', '项', 2200.00, 1, 2200.00, 2200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1317, '1648881418860220813', '备用金', '元', 1.00, 10000, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1318, '1648881418860210812', '其它成本', '元', 53500.00, 1, 53500.00, 45000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1319, '1648881418860210812', '租车尾款', '元', 24000.00, 1, 24000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (1320, '1648881418860210812', '房租', '元', 9600.00, 1, 9600.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (1321, '1648881418860210812', '商务成本', '元', 15000.00, 1, 15000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (1322, '1648881418860200811', '用餐成本', '人.天', 50.00, 75, 3750.00, 3750.00);
INSERT INTO `cmc_borrow_detail` VALUES (1323, '1648881418860200811', '住宿成本', '人.天', 100.00, 75, 7500.00, 7500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1324, '1648881418860200811', '用工成本', '人.天', 300.00, 60, 18000.00, 18000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1325, '1648881418860200811', '租车', '元.天', 750.00, 15, 11250.00, 11250.00);
INSERT INTO `cmc_borrow_detail` VALUES (1326, '1648881418860200811', '返程机票', '人.元', 1800.00, 4, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1327, '1648881418860200811', '设备托运费', '元', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1328, '1648881418860200811', '垫付夏志斌受伤治疗费用', '元', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1329, '1648881418860190810', '用餐成本', '人.天', 80.00, 21, 1680.00, 1680.00);
INSERT INTO `cmc_borrow_detail` VALUES (1330, '1648881418860190810', '住宿成本', '人.天', 80.00, 21, 1680.00, 1680.00);
INSERT INTO `cmc_borrow_detail` VALUES (1331, '1648881418860190810', '车辆加油及过路费', '天.元', 200.00, 7, 1400.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1332, '1648881418860190810', '埋石材料', '项', 100.00, 1, 100.00, 100.00);
INSERT INTO `cmc_borrow_detail` VALUES (1333, '1648881418860190810', 'SCCORS中心正常高计算费用', '项', 50.00, 10, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1334, '1648881418860180809', '人员食宿费用', '人天', 140.00, 150, 21000.00, 16500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1335, '1648881418860180809', '民工费用', '人天', 200.00, 56, 11200.00, 11200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1336, '1648881418860180809', '车辆费用', '项', 6000.00, 1, 6000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1337, '1648881418860180809', '劳动防护用品投入', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1338, '1648881418860170808', '用餐成本', '人天', 80.00, 84, 6720.00, 6720.00);
INSERT INTO `cmc_borrow_detail` VALUES (1339, '1648881418860170808', '住宿成本', '人天', 80.00, 77, 6160.00, 6160.00);
INSERT INTO `cmc_borrow_detail` VALUES (1340, '1648881418860170808', '交通成本', '项', 2120.00, 1, 2120.00, 2120.00);
INSERT INTO `cmc_borrow_detail` VALUES (1341, '1648881418860160807', '其它成本', '元', 50000.00, 1, 50000.00, 50000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1342, '1648881418860150806', '商务洽谈费用', NULL, NULL, NULL, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1343, '1648881418860150806', '礼品', NULL, NULL, NULL, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1344, '1648881418860150806', '交通出行费', NULL, NULL, NULL, 3000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (1345, '1648881418860150806', '住宿费', NULL, NULL, NULL, 3000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (1346, '1648881418860140805', '保险费', '元', 70.00, 1, 70.00, 70.00);
INSERT INTO `cmc_borrow_detail` VALUES (1347, '1648881418860130804', '中标服务费', '元', 43480.00, 1, 43480.00, 43480.00);
INSERT INTO `cmc_borrow_detail` VALUES (1348, '1648881418860120803', '项目临时人员工资余款', '次', 70000.00, 1, 70000.00, 70000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1349, '1648881418860110802', '用餐成本', '人/天', 80.00, 66, 5280.00, 5280.00);
INSERT INTO `cmc_borrow_detail` VALUES (1350, '1648881418860110802', '住宿成本', '人/天', 60.00, 66, 3960.00, 3960.00);
INSERT INTO `cmc_borrow_detail` VALUES (1351, '1648881418860110802', '车辆加油费', '元/天', 150.00, 20, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1352, '1648881418860110802', 'SCCORS中心正常计算费用', '元/点', 50.00, 10, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1353, '1648881418860100801', '生产借款', '33600', 33600.00, 1, 33600.00, 33600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1354, '1648881418860090800', '生活成本', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1355, '1648881418860090800', '车辆燃油费（含保养及简易维修）', '项', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1356, '1648881418860090800', '库区及枢纽区观测民工费', '人工', 200.00, 24, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1357, '1648881418860090800', '年度控制网复测（含便道维护）', '人工', 200.00, 72, 14400.00, 14400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1358, '1648881418860090800', '宴请', '项', 5790.00, 1, 5790.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (1359, '1648881418860090800', '控制网复测新增民工意外伤害险', '项', 1200.00, 1, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1360, '1648881418860090800', '人员进出场交通费', '项', 800.00, 1, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1361, '1648881418860080799', '住宿费', '人天', 100.00, 14, 1400.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1362, '1648881418860080799', '餐饮接待（部分）', '项', 1700.00, 1, 1700.00, 1700.00);
INSERT INTO `cmc_borrow_detail` VALUES (1363, '1648881418860080799', '临时租车', '项', 3200.00, 1, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1364, '1648881418860080799', '验收费', '次', 16000.00, 1, 16000.00, 16000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1365, '1648881418860070798', '用餐成本', '人/月', 1200.00, 4, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1366, '1648881418860070798', '耗材成本', '月', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1367, '1648881418860070798', '交通成本', '月', 1500.00, 1, 1500.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1368, '1648881418860070798', '用工', '次', 53650.00, 1, 53650.00, 53650.00);
INSERT INTO `cmc_borrow_detail` VALUES (1369, '1648881418860070798', '水电气网', '月', 1000.00, 1, 1000.00, 300.00);
INSERT INTO `cmc_borrow_detail` VALUES (1370, '1648881418860070798', '住房房租', '月', 1200.00, 1, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1371, '1648881418860070798', '仓库租金', '季度', 3000.00, 2, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1372, '1648881418860060797', '项目成本', NULL, NULL, NULL, 50000.00, 50000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1373, '1648881418860050796', '质量检验费用', '元', 30000.00, 1, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1374, '1648881418860040795', '生活成本', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1375, '1648881418860040795', '车辆燃油费（含保养及简易维修）', '项', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1376, '1648881418860040795', '库区及枢纽区观测民工费', '人工', 200.00, 36, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1377, '1648881418860040795', '年度控制网复测（含观测便道维护）', '人工', 200.00, 24, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1378, '1648881418860040795', '竣工资料整编装订、出版', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1379, '1648881418860040795', '监测点、观测房等移交前维护、修补、粉刷、涂喷等', '项', 15000.00, 1, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1380, '1648881418860040795', '人员进出场交通费', '项', 800.00, 1, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1381, '1648881418860030794', '租房', NULL, NULL, NULL, 6722.00, 6722.00);
INSERT INTO `cmc_borrow_detail` VALUES (1382, '1648881418860030794', '物业', NULL, NULL, NULL, 1680.00, 1680.00);
INSERT INTO `cmc_borrow_detail` VALUES (1383, '1648881418860020793', '项目成本', '1', 30000.00, 1, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1384, '1648881418860010792', '生活成本', '元/人', 90.00, 120, 10800.00, 10800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1385, '1648881418860010792', '住宿成本', '元/人', 100.00, 120, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1386, '1648881418860010792', '现场租车', '元', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1387, '1648881418860010792', '民工费用', '元/人', 300.00, 20, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1388, '1648881418860010792', '防疫物资', '元', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1389, '1648881418860010792', '比测设备材料', '元', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1390, '1648881418860000791', '住宿成本', '人/天', 60.00, 60, 3600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1391, '1648881418860000791', '用餐成本', '人/天', 80.00, 60, 4800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1392, '1648881418860000791', '车辆加油费', '天/元', 150.00, 15, 2250.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1393, '1648881418860000791', '坐标转换费用', '次/元', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1394, '1648881418860000791', '购买千寻网络RTK单日账号', '天/元', 18.00, 15, 270.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1395, '1648881418859990790', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1396, '1648881418859990790', '二滩大坝月度观测民工费', '人天', 120.00, 50, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1397, '1648881418859990790', '二滩大坝季度平面观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1398, '1648881418859990790', '二滩基准网年度复测民工费', '人天', 120.00, 157, 18840.00, 18840.00);
INSERT INTO `cmc_borrow_detail` VALUES (1399, '1648881418859990790', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1400, '1648881418859990790', '车辆费用', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1401, '1648881418859990790', '进出场交通费用', '人次', 268.00, 2, 536.00, 536.00);
INSERT INTO `cmc_borrow_detail` VALUES (1402, '1648881418859990790', '现场人员生活开支', '人天', 40.00, 125, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1403, '1648881418859980789', '住宿成本', '人天', 150.00, 10, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1404, '1648881418859980789', '用餐成本', '人天', 150.00, 10, 1500.00, 1198.00);
INSERT INTO `cmc_borrow_detail` VALUES (1405, '1648881418859970788', '其它成本', '元', 40000.00, 1, 40000.00, 40000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1406, '1648881418859970788', '住宿成本', '元', 15000.00, 1, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1407, '1648881418859960787', '生活成本', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1408, '1648881418859960787', '车辆燃油费（含保养及简易维修）', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1409, '1648881418859960787', '库区及枢纽区观测民工费', '人工', 200.00, 24, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1410, '1648881418859960787', '人员进出场交通费', '项', 1000.00, 1, 1000.00, 300.00);
INSERT INTO `cmc_borrow_detail` VALUES (1411, '1648881418859950786', '现场开支补充借款', '1', 1527.00, 1, 1527.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1412, '1648881418859940785', '用工费用', '人月', 3000.00, 33, 99000.00, 99000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1413, '1648881418859940785', '车辆加油费', NULL, NULL, NULL, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1414, '1648881418859930784', '用餐成本', '人.天', 80.00, 54, 4320.00, 4320.00);
INSERT INTO `cmc_borrow_detail` VALUES (1415, '1648881418859930784', '住宿成本', '人.天', 60.00, 54, 3240.00, 3240.00);
INSERT INTO `cmc_borrow_detail` VALUES (1416, '1648881418859930784', '车辆加油费', '元.天', 200.00, 16, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1417, '1648881418859920783', '用餐成本', '人.天', 70.00, 40, 2800.00, 2800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1418, '1648881418859920783', '住宿成本', '人.天', 70.00, 40, 2800.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1419, '1648881418859920783', '租车', '元.天', 200.00, 14, 2800.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1420, '1648881418859920783', '出场交通费用', '次', 150.00, 4, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1421, '1648881418859910782', '报纸订阅', '1', 3288.00, 1, 3288.00, 3288.00);
INSERT INTO `cmc_borrow_detail` VALUES (1422, '1648881418859900781', '用餐成本', '人/月', 1200.00, 3, 3600.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1423, '1648881418859900781', '耗材成本', '月', 300.00, 1, 300.00, 300.00);
INSERT INTO `cmc_borrow_detail` VALUES (1424, '1648881418859900781', '交通成本', '月', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1425, '1648881418859900781', '用工成本', '次', 25935.00, 1, 25935.00, 25935.00);
INSERT INTO `cmc_borrow_detail` VALUES (1426, '1648881418859900781', '水电气网', '月', 600.00, 1, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1427, '1648881418859900781', '住房房租', '月', 1200.00, 1, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1428, '1648881418859900781', '仓库房租', '季度', 3000.00, 3, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1429, '1648881418859890780', '官费（一种卷尺）', '1', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1430, '1648881418859890780', '实用新型专利2023年费（一种野外测绘专用帽）', '1', 90.00, 1, 90.00, 90.00);
INSERT INTO `cmc_borrow_detail` VALUES (1431, '1648881418859890780', '发明专利2023年费（一种基于自由设站归算算法的工程施工变形监测方法）', '1', 135.00, 1, 135.00, 135.00);
INSERT INTO `cmc_borrow_detail` VALUES (1432, '1648881418859880779', '外包劳务成本', NULL, 35000.00, 1, 35000.00, 35000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1433, '1648881418859870778', '桐子林月度观测民工费', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1434, '1648881418859870778', '二滩大坝月度观测民工费', '人天', 120.00, 50, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1435, '1648881418859870778', '金龙山四季度观测', '项', 23750.00, 1, 23750.00, 23750.00);
INSERT INTO `cmc_borrow_detail` VALUES (1436, '1648881418859870778', '内观人员月度固定工资', '项', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1437, '1648881418859870778', '车辆费用', '项', 5520.00, 1, 5520.00, 5520.00);
INSERT INTO `cmc_borrow_detail` VALUES (1438, '1648881418859870778', '进出场交通费用', '人次', 268.00, 2, 536.00, 536.00);
INSERT INTO `cmc_borrow_detail` VALUES (1439, '1648881418859870778', '现场人员生活开支', '人天', 40.00, 125, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1440, '1648881418859860777', '租房', NULL, NULL, NULL, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1441, '1648881418859850776', '车辆加油费', '元', 1200.00, 2, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1442, '1648881418859850776', '用餐费用', '元', 400.00, 12, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1443, '1648881418859850776', '耗材支出', '元', 300.00, 1, 300.00, 300.00);
INSERT INTO `cmc_borrow_detail` VALUES (1444, '1648881418859850776', '住宿费用', '元', 80.00, 33, 2640.00, 2640.00);
INSERT INTO `cmc_borrow_detail` VALUES (1445, '1648881418859850776', '坐标转换费用', '元', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1446, '1648881418859840775', '项目生产超支费用', '1', 3682.00, 1, 3682.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1447, '1648881418859830774', '担保费', '年', 100000.00, 1, 100000.00, 100000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1448, '1648881418859820773', '质量检验费用', '元', 50000.00, 1, 50000.00, 50000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1449, '1648881418859810772', '报纸订阅', '元', 496.00, 1, 496.00, 496.00);
INSERT INTO `cmc_borrow_detail` VALUES (1450, '1648881418859800771', '备用金', '元', 1.00, 110000, 110000.00, 110000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1451, '1648881418859790770', '人员设备进出场', '项', 12000.00, 1, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1452, '1648881418859790770', '生活费用', '人天', 400.00, 60, 24000.00, 24000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1453, '1648881418859790770', '住宿费用', '天', 240.00, 60, 14400.00, 14400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1454, '1648881418859790770', '租车费', '天', 400.00, 40, 16000.00, 16000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1455, '1648881418859790770', '民工费', '人天', 220.00, 100, 22000.00, 22000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1456, '1648881418859790770', '高原药品', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1457, '1648881418859790770', '民工意外险', '项', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1458, '1648881418859790770', '安全防护用品', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1459, '1648881418859780769', NULL, NULL, NULL, NULL, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1460, '1648881418859770768', '其它成本', '元', 8500.00, 1, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1461, '1648881418859770768', '房租', '元', 9600.00, 1, 9600.00, 9600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1462, '1648881418859770768', '商务成本', '元', 15000.00, 1, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1463, '1648881418859770768', '水磨机', '元', 6100.00, 1, 6100.00, 6100.00);
INSERT INTO `cmc_borrow_detail` VALUES (1464, '1648881418859770768', '租车尾款', '元', 24000.00, 1, 24000.00, 24000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1465, '1648881418859760767', '其它成本', '元', 40000.00, 1, 40000.00, 40000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1466, '1648881418859760767', '租房', '元', 26400.00, 1, 26400.00, 26400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1467, '1648881418859760767', '仪器检定费', '元', 6670.00, 1, 6670.00, 6670.00);
INSERT INTO `cmc_borrow_detail` VALUES (1468, '1648881418859750766', '专利年费', '1', 1200.00, 1, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1469, '1648881418859740765', '标书购买费', '元', 200.00, 1, 200.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1470, '1648881418859730764', '招标代理服务费', '元', 17343.00, 1, 17343.00, 17343.00);
INSERT INTO `cmc_borrow_detail` VALUES (1471, '1648881418859720763', '商业保险', NULL, NULL, NULL, 167700.00, 167700.00);
INSERT INTO `cmc_borrow_detail` VALUES (1472, '1648881418859710762', '用餐成本', '人/月', 1000.00, 6, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1473, '1648881418859710762', '耗材成本', '月', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1474, '1648881418859710762', '交通成本', '月', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1475, '1648881418859710762', '用工成本', '月', 18000.00, 1, 18000.00, 18000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1476, '1648881418859710762', '办公采购', '次', 5500.00, 1, 5500.00, 5500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1477, '1648881418859710762', '水电气网', '月', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1478, '1648881418859710762', '租金', '月', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1479, '1648881418859700761', '其它成本', '1', 4470.00, 10, 44700.00, 44700.00);
INSERT INTO `cmc_borrow_detail` VALUES (1480, '1648881418859690760', '用餐成本', '人.天', 60.00, 90, 5400.00, 5400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1481, '1648881418859690760', '住宿成本', '人.天', 80.00, 90, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1482, '1648881418859690760', '车辆加油费（外业测量组）', '天.元', 200.00, 15, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1483, '1648881418859690760', '车辆加油费（无人机飞行组）', '天.元', 200.00, 5, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1484, '1648881418859690760', '高速公路过路费', '次', 800.00, 2, 1600.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1485, '1648881418859690760', '千寻CORS购买费用', '天.元', 18.00, 10, 180.00, 180.00);
INSERT INTO `cmc_borrow_detail` VALUES (1486, '1648881418859680759', '设备租赁', '台', 30000.00, 1, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1487, '1648881418859670758', '其它成本', '元', 40000.00, 1, 40000.00, 40000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1488, '1648881418859660757', '其它成本', '1', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1489, '1648881418859650756', '标书购买费', '元', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1490, '1648881418859640755', '用餐成本', '人.天', 60.00, 60, 3600.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1491, '1648881418859640755', '住宿成本', '人.天', 50.00, 60, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1492, '1648881418859640755', '车辆加油费', '天.元', 200.00, 12, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1493, '1648881418859640755', '用工成本', '人.天', 200.00, 62, 12400.00, 12400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1494, '1648881418859640755', '租车', '天.元', 350.00, 4, 1400.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1495, '1648881418859630754', '开票成本', '次', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1496, '1648881418859620753', '车辆加油费', '1', 200.00, 3, 600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1497, '1648881418859620753', '住宿成本', '1', 100.00, 6, 600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1498, '1648881418859620753', '用餐成本', '1', 80.00, 6, 480.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1499, '1648881418859620753', '坐标转换费用', '1', 300.00, 1, 300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1500, '1648881418859610752', '补充借款', '项', 24963.28, 1, 24963.30, 24963.30);
INSERT INTO `cmc_borrow_detail` VALUES (1501, '1648881418859600751', '中标服务费', '元', 64883.00, 1, 64883.00, 64883.00);
INSERT INTO `cmc_borrow_detail` VALUES (1502, '1648881418859590750', '桐子林外观', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1503, '1648881418859590750', '二滩水准观测', '人天', 120.00, 55, 6600.00, 6600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1504, '1648881418859590750', '内观固定人员工资', '人月', 4250.00, 2, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1505, '1648881418859590750', '车辆费用', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1506, '1648881418859590750', '常驻人员生活费', '人天', 40.00, 120, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1507, '1648881418859590750', '进出场交通费', '人次', 268.00, 10, 2680.00, 2680.00);
INSERT INTO `cmc_borrow_detail` VALUES (1508, '1648881418859580749', '项目所在地跨区域预缴税', '1', 1.00, 20874, 20874.40, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1509, '1648881418859570748', '用餐成本', '人.天', 100.00, 32, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1510, '1648881418859570748', '住宿成本', '人.天', 70.00, 32, 2240.00, 2240.00);
INSERT INTO `cmc_borrow_detail` VALUES (1511, '1648881418859570748', '车辆加油费', '天.元', 200.00, 8, 1600.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1512, '1648881418859560747', '意外受伤医疗费用', '元', 30000.00, 1, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1513, '1648881418859550746', '用餐成本', '人.天', 100.00, 80, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1514, '1648881418859550746', '住宿成本', '人.天', 80.00, 80, 6400.00, 6400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1515, '1648881418859550746', '车辆加油费', '天.元', 200.00, 10, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1516, '1648881418859550746', 'E级GNSS解算', '点', 500.00, 6, 3000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (1517, '1648881418859550746', 'SCCORS中心正常计算费用', '点', 50.00, 20, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1518, '1648881418859540745', '招标网站会员费', '元', 0.06, 1, 0.10, 0.10);
INSERT INTO `cmc_borrow_detail` VALUES (1519, '1648881418859530744', '标书购买费', '元', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1520, '1648881418859520743', '其它成本', NULL, NULL, NULL, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1521, '1648881418859510742', '用餐成本', '元', 850.00, 1, 850.00, 850.00);
INSERT INTO `cmc_borrow_detail` VALUES (1522, '1648881418859510742', '住宿成本', '元', 1070.00, 1, 1070.00, 1070.00);
INSERT INTO `cmc_borrow_detail` VALUES (1523, '1648881418859510742', '车辆加油费', '元', 848.00, 1, 848.00, 848.00);
INSERT INTO `cmc_borrow_detail` VALUES (1524, '1648881418859510742', '车辆保养（更换机油）', '元', 495.00, 1, 495.00, 495.00);
INSERT INTO `cmc_borrow_detail` VALUES (1525, '1648881418859500741', 'SCCORS中心正常计算费用', '1', 570.00, 1, 570.00, 570.00);
INSERT INTO `cmc_borrow_detail` VALUES (1526, '1648881418859490740', '用餐成本', '人.天', 80.00, 200, 16000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1527, '1648881418859490740', '住宿成本', '人.天', 60.00, 200, 12000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1528, '1648881418859490740', '车辆加油费', '天.元', 150.00, 40, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1529, '1648881418859490740', '工具材料', '项', 300.00, 1, 300.00, 300.00);
INSERT INTO `cmc_borrow_detail` VALUES (1530, '1648881418859490740', '高速公路过路费', '次', 600.00, 2, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1531, '1648881418859490740', '购买防暑药品', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1532, '1648881418859490740', '民工费用', '人.天', 240.00, 120, 28800.00, 28800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1533, '1648881418859490740', '民工保险费用', '人.元', 400.00, 4, 1600.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1534, '1648881418859480739', 'SCCORS中心正常计算费用', '1', 300.00, 1, 300.00, 300.00);
INSERT INTO `cmc_borrow_detail` VALUES (1535, '1648881418859470738', '住宿成本', '元', 200.00, 25, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1536, '1648881418859470738', '用餐成本', '元', 80.00, 25, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1537, '1648881418859470738', '机票', '元', 3000.00, 3, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1538, '1648881418859470738', '耗材成本', '元', 200.00, 1, 200.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1539, '1648881418859470738', '交通成本', '元', 50.00, 20, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1540, '1648881418859470738', '商务成本', '元', 500.00, 5, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1541, '1648881418859460737', '住宿成本', '1', 200.00, 5, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1542, '1648881418859460737', '车辆加油费', '1', 160.00, 5, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1543, '1648881418859460737', '用餐成本', '1', 400.00, 5, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1544, '1648881418859450736', '住宿成本', '元', 300.00, 8, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1545, '1648881418859450736', '用餐成本', '元', 300.00, 8, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1546, '1648881418859450736', '车辆加油费', '元', 5200.00, 1, 5200.00, 5200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1547, '1648881418859440735', '用餐成本', '人.天', 60.00, 20, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1548, '1648881418859440735', '住宿成本', '人.天', 60.00, 20, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1549, '1648881418859440735', '车辆加油费', '天.元', 200.00, 5, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1550, '1648881418859430734', '开票税款', '次', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1551, '1648881418859420733', '九龙仓库房租', '季', 3250.00, 1, 3250.00, 3250.00);
INSERT INTO `cmc_borrow_detail` VALUES (1552, '1648881418859410732', '生产借款', '1', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1553, '1648881418859400731', '其它成本', '元', 10000.00, 3, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1554, '1648881418859390730', '用餐成本', '人.天', 80.00, 6, 480.00, 480.00);
INSERT INTO `cmc_borrow_detail` VALUES (1555, '1648881418859390730', '住宿成本', '人.天', 60.00, 6, 360.00, 360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1556, '1648881418859390730', '车辆加油费', '天.元', 200.00, 3, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1557, '1648881418859390730', 'SCCORS中心正常高计算费用', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1558, '1648881418859380729', '用餐成本', '项', 656.00, 1, 656.00, 656.00);
INSERT INTO `cmc_borrow_detail` VALUES (1559, '1648881418859380729', '住宿成本', '项', 750.00, 1, 750.00, 750.00);
INSERT INTO `cmc_borrow_detail` VALUES (1560, '1648881418859370728', '住宿成本', '元', 169.00, 35, 5915.00, 5915.00);
INSERT INTO `cmc_borrow_detail` VALUES (1561, '1648881418859370728', '车辆加油费', '元', 1800.00, 1, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1562, '1648881418859370728', '用餐成本', '元', 400.00, 15, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1563, '1648881418859370728', '耗材成本', '元', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1564, '1648881418859370728', '交通成本', '元', 40.00, 15, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1565, '1648881418859370728', '商务成本', '元', 50.00, 15, 750.00, 750.00);
INSERT INTO `cmc_borrow_detail` VALUES (1566, '1648881418859370728', '商务成本', '元', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1567, '1648881418859360727', '用餐成本', '月', 1000.00, 5, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1568, '1648881418859360727', '耗材成本', '月', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1569, '1648881418859360727', '交通成本', '月', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1570, '1648881418859360727', '用工成本', '人/月', 3000.00, 5, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1571, '1648881418859360727', '水电气物管费', '月', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1572, '1648881418859360727', '扫描仪（二手）', '台', 700.00, 4, 2800.00, 2800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1573, '1648881418859350726', '其它成本', '元', 4000.00, 1, 40000.00, 40000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1574, '1648881418859350726', '住宿成本', '元', 9300.00, 1, 9300.00, 9300.00);
INSERT INTO `cmc_borrow_detail` VALUES (1575, '1648881418859340725', '专利年费', '1', 1070.00, 1, 1070.00, 1070.00);
INSERT INTO `cmc_borrow_detail` VALUES (1576, '1648881418859330724', '张波2021~2022年结算预支费用', '元', 28712.50, 1, 28712.50, 28712.50);
INSERT INTO `cmc_borrow_detail` VALUES (1577, '1648881418859320723', '住宿成本', NULL, NULL, NULL, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1578, '1648881418859310722', '商务成本', '1', 17000.00, 1, 17000.00, 17000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1579, '1648881418859310722', '用餐成本', '1', 18000.00, 1, 18000.00, 18000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1580, '1648881418859310722', '其它成本', '1', 22000.00, 1, 22000.00, 22000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1581, '1648881418859300721', '备用金', '次', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1582, '1648881418859290720', '保函费用', '次', 16660.00, 1, 16660.00, 16660.00);
INSERT INTO `cmc_borrow_detail` VALUES (1583, '1648881418859280719', '车辆加油费', '元', 200.00, 3, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1584, '1648881418859280719', '用餐成本', '人.天', 60.00, 12, 720.00, 720.00);
INSERT INTO `cmc_borrow_detail` VALUES (1585, '1648881418859280719', '住宿成本', '人.天', 60.00, 12, 720.00, 720.00);
INSERT INTO `cmc_borrow_detail` VALUES (1586, '1648881418859270718', '产业发展报告书', '套', 128.00, 1, 128.00, 128.00);
INSERT INTO `cmc_borrow_detail` VALUES (1587, '1648881418859260717', NULL, NULL, NULL, NULL, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1588, '1648881418859250716', '住宿成本', '元', 150.00, 7, 1050.00, 1050.00);
INSERT INTO `cmc_borrow_detail` VALUES (1589, '1648881418859250716', '用餐成本', '元', 150.00, 7, 1050.00, 1050.00);
INSERT INTO `cmc_borrow_detail` VALUES (1590, '1648881418859250716', '租车', '元', 500.00, 3, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1591, '1648881418859250716', '交通成本', '元', 2000.00, 2, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1592, '1648881418859240715', '二滩水准观测', '人天', 120.00, 50, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1593, '1648881418859240715', '二滩平面观测', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1594, '1648881418859240715', '桐子林外观', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1595, '1648881418859240715', '内观固定人员工资', '人月', 4250.00, 2, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1596, '1648881418859240715', '车辆费用', '项', 3800.00, 1, 3800.00, 3800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1597, '1648881418859240715', '金龙山观测', '项', 24500.00, 1, 24500.00, 24500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1598, '1648881418859240715', '进出场交通费', '人次', 268.00, 8, 2144.00, 2144.00);
INSERT INTO `cmc_borrow_detail` VALUES (1599, '1648881418859240715', '现场人员生活开支', '人天', 60.00, 80, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1600, '1648881418859230714', '用餐成本', '1', 270.50, 2, 541.00, 541.00);
INSERT INTO `cmc_borrow_detail` VALUES (1601, '1648881418859230714', '车辆加油费', '1', 612.50, 2, 1225.00, 1225.00);
INSERT INTO `cmc_borrow_detail` VALUES (1602, '1648881418859230714', '住宿成本', '1', 240.00, 2, 480.00, 480.00);
INSERT INTO `cmc_borrow_detail` VALUES (1603, '1648881418859220713', '用餐成本', '人.天', 60.00, 75, 4500.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1604, '1648881418859220713', '住宿成本', '人.天', 60.00, 75, 4500.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1605, '1648881418859220713', '车辆加油费', '天.元', 200.00, 15, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1606, '1648881418859220713', '租船', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1607, '1648881418859210712', '履约保函', '次', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1608, '1648881418859200711', '二等观测墩土建', '个', 1000.00, 16, 16000.00, 14800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1609, '1648881418859200711', '三角点、水准点土建', '个', 200.00, 56, 11200.00, 8400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1610, '1648881418859200711', '人员食宿', '人天', 140.00, 200, 28000.00, 22000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1611, '1648881418859200711', '车辆燃油费、过路费', '项', 4800.00, 1, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1612, '1648881418859190710', '用餐成本', '项', 990.00, 1, 990.00, 990.00);
INSERT INTO `cmc_borrow_detail` VALUES (1613, '1648881418859190710', '住宿成本', '项', 720.00, 1, 720.00, 720.00);
INSERT INTO `cmc_borrow_detail` VALUES (1614, '1648881418859190710', '车辆加油费', '项', 920.00, 1, 920.00, 920.00);
INSERT INTO `cmc_borrow_detail` VALUES (1615, '1648881418859190710', '防暑降温药品', '项', 120.00, 1, 120.00, 120.00);
INSERT INTO `cmc_borrow_detail` VALUES (1616, '1648881418859180709', '用餐成本', '人.天', 65.00, 55, 3575.00, 3575.00);
INSERT INTO `cmc_borrow_detail` VALUES (1617, '1648881418859180709', '住宿成本', '人.天', 70.00, 55, 3850.00, 3850.00);
INSERT INTO `cmc_borrow_detail` VALUES (1618, '1648881418859180709', '车辆加油费', '天.元', 300.00, 15, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1619, '1648881418859180709', '工具材料', '项', 100.00, 1, 100.00, 100.00);
INSERT INTO `cmc_borrow_detail` VALUES (1620, '1648881418859180709', 'SCCORS中心正常高计算费用', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1621, '1648881418859170708', '保险费', NULL, NULL, NULL, 2076.44, 2076.44);
INSERT INTO `cmc_borrow_detail` VALUES (1622, '1648881418859160707', '中标服务费', '元', 12700.00, 1, 12700.00, 12700.00);
INSERT INTO `cmc_borrow_detail` VALUES (1623, '1648881418859150706', '住宿成本', '元', 120.00, 14, 1680.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1624, '1648881418859150706', '车辆加油费', '元', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1625, '1648881418859150706', '用餐成本', '元', 240.00, 7, 1680.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1626, '1648881418859140705', '用餐成本', '人天', 80.00, 58, 4640.00, 4640.00);
INSERT INTO `cmc_borrow_detail` VALUES (1627, '1648881418859140705', '住宿成本', '人天', 80.00, 52, 4160.00, 4160.00);
INSERT INTO `cmc_borrow_detail` VALUES (1628, '1648881418859140705', '车辆成本', '项', 2700.00, 1, 2700.00, 2700.00);
INSERT INTO `cmc_borrow_detail` VALUES (1629, '1648881418859140705', '五金采购', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1630, '1648881418859130704', '用餐成本', '人.天', 90.00, 28, 2520.00, 2520.00);
INSERT INTO `cmc_borrow_detail` VALUES (1631, '1648881418859130704', '住宿成本', '人.天', 70.00, 28, 1960.00, 1960.00);
INSERT INTO `cmc_borrow_detail` VALUES (1632, '1648881418859130704', '租车', '天.元', 500.00, 7, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1633, '1648881418859130704', '进出场机票', '人/元', 860.00, 8, 6880.00, 6880.00);
INSERT INTO `cmc_borrow_detail` VALUES (1634, '1648881418859120703', '其它成本', '元', 10000.00, 2, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1635, '1648881418859110702', '第三方平台信息使用费', NULL, NULL, NULL, 1762.20, 1762.20);
INSERT INTO `cmc_borrow_detail` VALUES (1636, '1648881418859100701', '生活成本', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1637, '1648881418859100701', '车辆燃油费（含保养及简易维修）', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1638, '1648881418859100701', '库区及枢纽区观测民工费', '人工', 200.00, 24, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1639, '1648881418859100701', '人员进出场交通费', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1640, '1648881418859090700', '其它成本', NULL, 1.00, 1, 60000.00, 60000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1641, '1648881418859080699', '会议费', '1', 1800.00, 1, 1800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1642, '1648881418859070698', '学会、协会会费', '1', 15000.00, 1, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1643, '1648881418859060697', '用餐成本', '人.天', 60.00, 78, 4680.00, 4680.00);
INSERT INTO `cmc_borrow_detail` VALUES (1644, '1648881418859060697', '住宿成本', '人.天', 50.00, 78, 3900.00, 3900.00);
INSERT INTO `cmc_borrow_detail` VALUES (1645, '1648881418859060697', '车辆加油费', '天.元', 200.00, 13, 2600.00, 2600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1646, '1648881418859060697', '用工成本', '人.天', 200.00, 104, 20800.00, 20800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1647, '1648881418859060697', '防暑药品', '项', 200.00, 1, 200.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1648, '1648881418859060697', '劳保用品', '项', 200.00, 1, 200.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1649, '1648881418859060697', '民工保险费用', '人.元', 260.00, 4, 1040.00, 1040.00);
INSERT INTO `cmc_borrow_detail` VALUES (1650, '1648881418859050696', '住宿成本', '人天', 150.00, 8, 1200.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1651, '1648881418859050696', '车辆加油费', '项', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1652, '1648881418859050696', '用餐成本', '天', 300.00, 4, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1653, '1648881418859050696', '商务成本', '项', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1654, '1648881418859040695', '用餐成本', '人/月', 1000.00, 6, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1655, '1648881418859040695', '耗材成本', '月', 5400.00, 1, 5400.00, 5400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1656, '1648881418859040695', '交通成本', '月', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1657, '1648881418859040695', '用工成本', '次', 53300.00, 1, 53300.00, 53300.00);
INSERT INTO `cmc_borrow_detail` VALUES (1658, '1648881418859040695', '水电气网', '月', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1659, '1648881418859030694', '二滩大坝水准观测', '人天', 120.00, 50, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1660, '1648881418859030694', '桐子林外观', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1661, '1648881418859030694', '内观固定人员工资', '人月', 4250.00, 2, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1662, '1648881418859030694', '车辆燃油及维修', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1663, '1648881418859030694', '人员进出场交通费', '人次', 268.00, 8, 2144.00, 2144.00);
INSERT INTO `cmc_borrow_detail` VALUES (1664, '1648881418859030694', '现场人员生活及办公费', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1665, '1648881418859020693', '住宿成本', '10', 80.00, 80, 6400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1666, '1648881418859020693', '车辆加油费', '10', 200.00, 20, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1667, '1648881418859020693', '用餐成本', '10', 100.00, 80, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1668, '1648881418859020693', 'E级GNSS解算', '1', 600.00, 5, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1669, '1648881418859020693', 'SCCORS中心正常计算费用', '1', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1670, '1648881418859010692', '增值税税金', '1', 85000.00, 1, 85000.00, 85000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1671, '1648881418859000691', 'GNSS点和水准点土建民工费', '人天', 220.00, 24, 5280.00, 5280.00);
INSERT INTO `cmc_borrow_detail` VALUES (1672, '1648881418859000691', '材料费及占地补偿', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1673, '1648881418859000691', '平面观测民工费', '人天', 220.00, 8, 1760.00, 1760.00);
INSERT INTO `cmc_borrow_detail` VALUES (1674, '1648881418859000691', '水准观测民工费', '人天', 220.00, 42, 9240.00, 9240.00);
INSERT INTO `cmc_borrow_detail` VALUES (1675, '1648881418859000691', '现场人工食宿费用', '人天', 120.00, 120, 14400.00, 14400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1676, '1648881418859000691', '车辆费用', '项', 4500.00, 1, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1677, '1648881418858990690', '用餐成本', '人.天', 80.00, 12, 960.00, 960.00);
INSERT INTO `cmc_borrow_detail` VALUES (1678, '1648881418858990690', '住宿成本', '人.天', 80.00, 7, 560.00, 560.00);
INSERT INTO `cmc_borrow_detail` VALUES (1679, '1648881418858990690', '交通成本', '项', 500.00, 2, 1000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1680, '1648881418858990690', '租车', '天.元', 500.00, 5, 2500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1681, '1648881418858990690', '外包劳务成本', '项', 12000.00, 1, 12000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (1682, '1648881418858980689', '租房', NULL, 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1683, '1648881418858980689', '住宿成本', NULL, 120.00, 18, 2160.00, 2160.00);
INSERT INTO `cmc_borrow_detail` VALUES (1684, '1648881418858980689', '用餐成本', NULL, 60.00, 14, 840.00, 840.00);
INSERT INTO `cmc_borrow_detail` VALUES (1685, '1648881418858980689', '生活成本', NULL, 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1686, '1648881418858980689', '办公用品', NULL, 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1687, '1648881418858980689', '交通成本', NULL, 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1688, '1648881418858980689', '打印', NULL, 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1689, '1648881418858970688', '其它成本', '项', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1690, '1648881418858960687', '住宿、用餐、燃油等成本', '1', 6243.00, 1, 6243.00, 6243.00);
INSERT INTO `cmc_borrow_detail` VALUES (1691, '1648881418858950686', '人员进出场', '元/人', 4000.00, 2, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1692, '1648881418858950686', '生活费用', '元/人', 90.00, 60, 5400.00, 5400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1693, '1648881418858950686', '住宿成本', '元/人', 100.00, 60, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1694, '1648881418858950686', '现场租车', '元', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1695, '1648881418858950686', '劳动及防护用品', '元', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1696, '1648881418858940685', '用餐成本', '人.天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1697, '1648881418858940685', '住宿成本', '人.天', 100.00, 28, 2800.00, 2800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1698, '1648881418858940685', '租车（含油费）', '元.天', 800.00, 7, 5600.00, 5600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1699, '1648881418858940685', '进出场交通费用', '项', 2600.00, 1, 2600.00, 2600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1700, '1648881418858940685', '埋石工具费用', '项', 1000.00, 1, 1000.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1701, '1648881418858930684', '桐子林外观观测', '人天', 28.00, 120, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1702, '1648881418858930684', '二滩垂直位移观测', '人天', 50.00, 120, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1703, '1648881418858930684', '内观人员固定工资', '人月', 4250.00, 2, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1704, '1648881418858930684', '车辆费用', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1705, '1648881418858930684', '进出场交通分', '人次', 268.00, 8, 2144.00, 2144.00);
INSERT INTO `cmc_borrow_detail` VALUES (1706, '1648881418858930684', '现场人员生活费', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1707, '1648881418858930684', '二滩观测便道维护', '项', 18000.00, 1, 18000.00, 18000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1708, '1648881418858930684', '桐子林基准网年度观测', '人天', 120.00, 70, 8400.00, 8400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1709, '1648881418858920683', '培训费', '元', 2100.00, 2, 4200.00, 4200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1710, '1648881418858910682', '用餐成本', '天', 60.00, 150, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1711, '1648881418858910682', '租车', NULL, NULL, NULL, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1712, '1648881418858910682', '耗材成本', NULL, NULL, NULL, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1713, '1648881418858910682', '车辆加油费', NULL, NULL, NULL, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1714, '1648881418858910682', '其它成本', NULL, NULL, NULL, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1715, '1648881418858910682', '租房', NULL, NULL, NULL, 6722.00, 6722.00);
INSERT INTO `cmc_borrow_detail` VALUES (1716, '1648881418858910682', '水电', NULL, NULL, NULL, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1717, '1648881418858910682', '物业', NULL, NULL, NULL, 1680.00, 1680.00);
INSERT INTO `cmc_borrow_detail` VALUES (1718, '1648881418858910682', '租房押金', NULL, NULL, NULL, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1719, '1648881418858910682', '试点预算超支费用', NULL, NULL, NULL, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1720, '1648881418858900681', '中标服务费', '元', 24000.00, 1, 24000.00, 24000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1721, '1648881418858890680', '生活成本', '项', 4500.00, 1, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1722, '1648881418858890680', '车辆燃油费（含保养及简易维修）', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1723, '1648881418858890680', '库区及枢纽区观测民工费', '人工', 200.00, 48, 9600.00, 9600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1724, '1648881418858890680', '人员进出场交通费', '项', 600.00, 1, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1725, '1648881418858890680', '库区开绕隧洞出口新增2个观测点', '个', 750.00, 2, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1726, '1648881418858880679', '其它成本', '元', 53500.00, 1, 40000.00, 40000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1727, '1648881418858880679', '商务成本', '元', 13500.00, 1, 13500.00, 13500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1728, '1648881418858870678', '中标服务费', '项', 12000.00, 1, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1729, '1648881418858870678', '中标服务费', '项', 8000.00, 1, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1730, '1648881418858860677', '保险费', NULL, NULL, 6, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1731, '1648881418858850676', '车辆加油费', '1', 200.00, 15, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1732, '1648881418858850676', '交通成本(高速过路费)', '1', 800.00, 2, 1600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1733, '1648881418858850676', '住宿成本', '1', 60.00, 75, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1734, '1648881418858850676', '用餐成本', '1', 80.00, 75, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1735, '1648881418858850676', '购买千寻网络RTK单日账号', '1', 18.00, 7, 126.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1736, '1648881418858840675', '中标服务费', '元', 32260.00, 1, 32260.00, 32260.00);
INSERT INTO `cmc_borrow_detail` VALUES (1737, '1648881418858830674', '中标服务费', '元', 57300.00, 1, 57300.00, 57300.00);
INSERT INTO `cmc_borrow_detail` VALUES (1738, '1648881418858820673', '人员设备进出场（含机票）', '项', 1.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1739, '1648881418858820673', '住宿费用', '人天', 150.00, 60, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1740, '1648881418858820673', '生活费用', '人天', 120.00, 120, 14400.00, 9600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1741, '1648881418858820673', '租车费', '人天', 500.00, 25, 12500.00, 12500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1742, '1648881418858820673', '民工费', '人天', 220.00, 80, 17600.00, 17600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1743, '1648881418858820673', '民工人生意外险', '项', 1.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1744, '1648881418858820673', '高原医药用品', '项', 1.00, 1, 2000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1745, '1648881418858810672', '用餐成本', '人/月', 1200.00, 5, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1746, '1648881418858810672', '耗材成本', '月', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1747, '1648881418858810672', '车辆成本', '月', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1748, '1648881418858810672', '用工成本', '月', 16570.00, 1, 16570.00, 16570.00);
INSERT INTO `cmc_borrow_detail` VALUES (1749, '1648881418858810672', '仓库房租1个季度', '季度', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1750, '1648881418858810672', '水电气网', '月', 600.00, 1, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1751, '1648881418858800671', '增值税税金', '1', 70000.00, 1, 70000.00, 70000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1752, '1648881418858790670', '审查成本', '1', 18000.00, 1, 18000.00, 18000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1753, '1648881418858780669', '其它成本', '件', 38.00, 100, 3800.00, 3800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1754, '1648881418858770668', '其它成本', '元', 10000.00, 2, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1755, '1648881418858760667', '用餐成本', '人.天', 60.00, 80, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1756, '1648881418858760667', '住宿成本', '人.天', 80.00, 80, 6400.00, 6400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1757, '1648881418858760667', '租车', '天', 800.00, 20, 16000.00, 16000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1758, '1648881418858760667', '用工成本', '人.天', 300.00, 6, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1759, '1648881418858760667', '卫片资料收集费用', '元', 22000.00, 1, 22000.00, 22000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1760, '1648881418858750666', '住宿成本', '人天', 80.00, 25, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1761, '1648881418858750666', '进出场', '天', 300.00, 2, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1762, '1648881418858750666', '车辆加油费', '天', 80.00, 5, 400.00, 400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1763, '1648881418858750666', '用餐成本', '人天', 70.00, 25, 1750.00, 1750.00);
INSERT INTO `cmc_borrow_detail` VALUES (1764, '1648881418858740665', '项目管理费', NULL, NULL, NULL, 160000.00, 160000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1765, '1648881418858730664', '学会、协会会费', '1', 14000.00, 1, 14000.00, 14000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1766, '1648881418858720663', '其它成本', '元', 10000.00, 2, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1767, '1648881418858710662', '担保费', '1', 160000.00, 1, 160000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1768, '1648881418858700661', '中标服务费', '元', 16576.00, 1, 16576.00, 16576.00);
INSERT INTO `cmc_borrow_detail` VALUES (1769, '1648881418858690660', '审查成本', '1', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1770, '1648881418858680659', '光纤费用', '元', 268.00, 6, 1608.00, 1608.00);
INSERT INTO `cmc_borrow_detail` VALUES (1771, '1648881418858670658', '用餐成本', '人/天', 120.00, 40, 4800.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1772, '1648881418858670658', '住宿成本', '人/天', 150.00, 40, 6000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1773, '1648881418858670658', '返程机票', '元/次', 2000.00, 2, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1774, '1648881418858670658', '租车', '元/天', 750.00, 15, 11250.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1775, '1648881418858660657', '住宿成本', '人天', 200.00, 15, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1776, '1648881418858660657', '用餐成本', '人天', 300.00, 15, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1777, '1648881418858660657', '燃油费', '天', 150.00, 15, 2250.00, 2250.00);
INSERT INTO `cmc_borrow_detail` VALUES (1778, '1648881418858660657', '用工成本', '人天', 200.00, 30, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1779, '1648881418858660657', '地面标材料成本', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1780, '1648881418858650656', '项目管理费', NULL, NULL, NULL, 200000.00, 200000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1781, '1648881418858640655', '车辆加油费', '项', NULL, NULL, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1782, '1648881418858640655', '住宿', '间', 160.00, 10, 1600.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1783, '1648881418858640655', '生活费', '天', 240.00, 5, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1784, '1648881418858630654', '光纤费用', '元', 7540.00, 1, 7540.00, 7540.00);
INSERT INTO `cmc_borrow_detail` VALUES (1785, '1648881418858620653', '培训费', NULL, NULL, NULL, 580.00, 580.00);
INSERT INTO `cmc_borrow_detail` VALUES (1786, '1648881418858610652', '用餐成本', '人.天', 100.00, 30, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1787, '1648881418858610652', '住宿成本', '人.天', 120.00, 30, 3600.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1788, '1648881418858610652', '机票', '人.次', 2000.00, 4, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1789, '1648881418858600651', '生活成本', '项', 4500.00, 1, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1790, '1648881418858600651', '车辆燃油费（含保养及简易维修）', '项', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1791, '1648881418858600651', '库区及枢纽区观测民工费', '人工', 200.00, 24, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1792, '1648881418858600651', '人员进出场交通费', '项', 1000.00, 1, 1000.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1793, '1648881418858590650', '人员进出场交通费', '元/人', 4000.00, 3, 12000.00, 12000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1794, '1648881418858590650', '生活费用', '元/人', 90.00, 90, 8100.00, 8100.00);
INSERT INTO `cmc_borrow_detail` VALUES (1795, '1648881418858590650', '住宿成本', '元/人', 150.00, 60, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1796, '1648881418858590650', '现场租车', '月', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1797, '1648881418858590650', '土建成本', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1798, '1648881418858590650', '民工成本', '元/人', 220.00, 30, 6600.00, 6600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1799, '1648881418858590650', '民工保险费', '元/人', 500.00, 3, 1500.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1800, '1648881418858590650', '劳动及防护用品采购', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1801, '1648881418858590650', '其它费用', '项', 3000.00, 1, 3000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1802, '1648881418858580649', '车辆加油费', '项', 2000.00, 1, 2000.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1803, '1648881418858580649', '用餐成本', '人天', 100.00, 30, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1804, '1648881418858580649', '住宿成本', '人天', 100.00, 30, 3000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1805, '1648881418858570648', '用餐成本', '项', 1402.00, 1, 1402.00, 1402.00);
INSERT INTO `cmc_borrow_detail` VALUES (1806, '1648881418858570648', '住宿成本', '项', 1680.00, 1, 1680.00, 1680.00);
INSERT INTO `cmc_borrow_detail` VALUES (1807, '1648881418858570648', '车辆加油费', '项', 951.00, 1, 951.00, 951.00);
INSERT INTO `cmc_borrow_detail` VALUES (1808, '1648881418858560647', '担保费', '年', 160000.00, 1, 160000.00, 160000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1809, '1648881418858550646', '住宿成本', '人天', 60.00, 42, 2520.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1810, '1648881418858550646', '用餐成本', '人天', 100.00, 42, 4200.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1811, '1648881418858550646', '交通成本', '辆/天', 80.00, 14, 1120.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1812, '1648881418858550646', '坐标转换费用', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1813, '1648881418858550646', '常备药品', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1814, '1648881418858540645', '生活成本', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1815, '1648881418858540645', '车辆燃油费（含保养及简易维修）', '项', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1816, '1648881418858540645', '库区及枢纽区观测民工费', '人工', 200.00, 36, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1817, '1648881418858540645', '人员进出场交通费', '项', 600.00, 1, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1818, '1648881418858530644', '住宿成本', '1', 50.00, 6, 300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1819, '1648881418858530644', '用餐成本', '1', 60.00, 6, 360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1820, '1648881418858530644', '车辆加油费', '1', 350.00, 2, 700.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1821, '1648881418858530644', '坐标转换费用', '1', 300.00, 1, 300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1822, '1648881418858520643', '住宿成本', '间', 200.00, 4, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1823, '1648881418858520643', '用餐成本', '元', 60.00, 12, 720.00, 720.00);
INSERT INTO `cmc_borrow_detail` VALUES (1824, '1648881418858520643', '车辆加油费', '元', NULL, NULL, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1825, '1648881418858520643', '租船', NULL, NULL, NULL, 6400.00, 6400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1826, '1648881418858520643', '购买千寻网络RTK单日账号', '天', 18.00, 2, 36.00, 36.00);
INSERT INTO `cmc_borrow_detail` VALUES (1827, '1648881418858510642', '用餐成本', '人/天', 60.00, 60, 3600.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1828, '1648881418858510642', '住宿成本', '人/天', 50.00, 60, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1829, '1648881418858510642', '租车', '人/天', 750.00, 30, 22500.00, 22500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1830, '1648881418858510642', '用工成本', '人/元', 280.00, 60, 16800.00, 16800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1831, '1648881418858510642', '工人保险费', '元', 200.00, 5, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1832, '1648881418858510642', '设备托运费', '元', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1833, '1648881418858500641', '生活成本', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1834, '1648881418858500641', '车辆燃油费（含保养及简易维修）', '项', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1835, '1648881418858500641', '库区及枢纽区观测民工费', '人工', 200.00, 36, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1836, '1648881418858500641', '人员进出场交通费', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1837, '1648881418858500641', '商务宴请', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1838, '1648881418858500641', '买电风扇', '个', 150.00, 4, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1839, '1648881418858500641', '人员进出场交通费', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1840, '1648881418858490640', '专利年费', '1', 95.00, 1, 95.00, 95.00);
INSERT INTO `cmc_borrow_detail` VALUES (1841, '1648881418858480639', '住宿成本', '人.天', 100.00, 210, 21000.00, 21000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1842, '1648881418858480639', '用餐成本', '人.天', 80.00, 210, 16800.00, 16800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1843, '1648881418858480639', '车辆加油费', '天', 150.00, 45, 6750.00, 6750.00);
INSERT INTO `cmc_borrow_detail` VALUES (1844, '1648881418858470638', '生活成本', '项', 6150.00, 1, 6150.00, 6150.00);
INSERT INTO `cmc_borrow_detail` VALUES (1845, '1648881418858470638', '车辆燃油费（含保养及简易维修）', '项', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1846, '1648881418858470638', '库区及枢纽区观测民工费', '人工', 200.00, 12, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1847, '1648881418858470638', '人员进出场交通费', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1848, '1648881418858460637', '住宿成本', '人天', 80.00, 70, 5600.00, 5600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1849, '1648881418858460637', '用餐成本', '人天', 100.00, 70, 7000.00, 7000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1850, '1648881418858460637', '进出场', '天', 600.00, 2, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1851, '1648881418858460637', '工地用车', '天', 80.00, 10, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1852, '1648881418858460637', '坐标转换费用', '元', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1853, '1648881418858450636', '中标服务费', '元', 9480.00, 1, 9480.00, 9480.00);
INSERT INTO `cmc_borrow_detail` VALUES (1854, '1648881418858440635', '车辆加油费', '天.元', 150.00, 8, 1200.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1855, '1648881418858440635', '用餐成本', '人.天', 60.00, 32, 1920.00, 1920.00);
INSERT INTO `cmc_borrow_detail` VALUES (1856, '1648881418858440635', '住宿成本', '人.天', 60.00, 32, 1920.00, 1920.00);
INSERT INTO `cmc_borrow_detail` VALUES (1857, '1648881418858440635', 'SCCORS中心正常高计算费用', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1858, '1648881418858430634', '车辆加油费', '1', 200.00, 3, 600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1859, '1648881418858430634', '住宿成本', '1', 60.00, 12, 720.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1860, '1648881418858430634', '用餐成本', '1', 60.00, 12, 720.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1861, '1648881418858420633', '车辆加油费', '1', 150.00, 8, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1862, '1648881418858420633', '住宿成本', '1', 60.00, 32, 1920.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1863, '1648881418858420633', '用餐成本', '1', 60.00, 32, 1920.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1864, '1648881418858420633', '租船', '1', 1200.00, 1, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1865, '1648881418858420633', '坐标转换费用', '1', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (1866, '1648881418858410632', '培训费', '人次', 2000.00, 2, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1867, '1648881418858400631', '保险费', NULL, NULL, NULL, 809.20, 809.20);
INSERT INTO `cmc_borrow_detail` VALUES (1868, '1648881418858390630', '标书购买费', '元', 200.00, 1, 200.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1869, '1648881418858380629', '其它成本', '元', NULL, 1, 50000.00, 50000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1870, '1648881418858380629', '外包劳务成本', '元', NULL, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1871, '1648881418858380629', '施工监测小区押金、管理费', '元', NULL, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1872, '1648881418858370628', '桐子林外观', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1873, '1648881418858370628', '二滩外观水准', '人天', 120.00, 50, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1874, '1648881418858370628', '内观固定人员工资', '月', 4250.00, 2, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1875, '1648881418858370628', '聘用司机工资', '月', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1876, '1648881418858370628', '车辆费用', '项', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1877, '1648881418858370628', '常驻人员生活费', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1878, '1648881418858370628', '进出场交通费', '人次', 268.00, 8, 2144.00, 2144.00);
INSERT INTO `cmc_borrow_detail` VALUES (1879, '1648881418858370628', '离职人员预结算费', '项', 70000.00, 1, 70000.00, 70000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1880, '1648881418858360627', '保险费', NULL, NULL, NULL, 4103.80, 4103.80);
INSERT INTO `cmc_borrow_detail` VALUES (1881, '1648881418858350626', '培训费用', '元', 1200.00, 6, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1882, '1648881418858340625', '其它成本', NULL, 10000.00, 2, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1883, '1648881418858330624', NULL, NULL, NULL, NULL, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1884, '1648881418858320623', '用餐成本', '人.天', 60.00, 24, 1440.00, 1440.00);
INSERT INTO `cmc_borrow_detail` VALUES (1885, '1648881418858320623', '住宿成本', '人.天', 80.00, 24, 1920.00, 1920.00);
INSERT INTO `cmc_borrow_detail` VALUES (1886, '1648881418858320623', '车辆加油费', '天.元', 150.00, 7, 1050.00, 1050.00);
INSERT INTO `cmc_borrow_detail` VALUES (1887, '1648881418858320623', 'SCCORS中心正常计算费用', '项', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1888, '1648881418858310622', '坐标转换费用', '点', 30.00, 10, 300.00, 300.00);
INSERT INTO `cmc_borrow_detail` VALUES (1889, '1648881418858300621', '招标网站认证费', '元', 0.01, 1, 0.01, 0.01);
INSERT INTO `cmc_borrow_detail` VALUES (1890, '1648881418858290620', NULL, NULL, NULL, NULL, 23800.00, 23800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1891, '1648881418858280619', '交通成本', '元', 3000.00, 2, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1892, '1648881418858280619', '住宿成本', '元', 240.00, 15, 3600.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1893, '1648881418858270618', '补充借款', '项', 9000.00, 1, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1894, '1648881418858270618', '租船', '项', 5500.00, 1, 5500.00, 5500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1895, '1648881418858260617', '住宿成本', '人/天', 50.00, 6, 300.00, 300.00);
INSERT INTO `cmc_borrow_detail` VALUES (1896, '1648881418858260617', '用餐成本', '人/天', 60.00, 6, 360.00, 360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1897, '1648881418858260617', '车辆加油费', '天/元', 350.00, 2, 700.00, 700.00);
INSERT INTO `cmc_borrow_detail` VALUES (1898, '1648881418858260617', 'SCCORS中心正常计算费用', '元', 300.00, 1, 300.00, 300.00);
INSERT INTO `cmc_borrow_detail` VALUES (1899, '1648881418858250616', '车辆加油费', NULL, 1.00, 2000, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1900, '1648881418858250616', '住宿成本', NULL, 120.00, 6, 720.00, 720.00);
INSERT INTO `cmc_borrow_detail` VALUES (1901, '1648881418858250616', '用餐成本', NULL, 60.00, 16, 960.00, 960.00);
INSERT INTO `cmc_borrow_detail` VALUES (1902, '1648881418858250616', '租船', NULL, NULL, NULL, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1903, '1648881418858240615', '保险费', NULL, NULL, NULL, 3600.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1904, '1648881418858230614', '用餐成本', '月', 1000.00, 5, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1905, '1648881418858230614', '车辆加油费', '月', 2000.00, 2, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1906, '1648881418858230614', '印刷费', '月', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1907, '1648881418858230614', '办公采购', '月', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1908, '1648881418858230614', '水电气网', '月', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1909, '1648881418858220613', '标书购买费', '元', 320.00, 10, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1910, '1648881418858210612', '生活成本', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1911, '1648881418858210612', '车辆燃油费（含保养及简易维修）', '项', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1912, '1648881418858210612', '库区及枢纽区观测民工费', '人工', 200.00, 36, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1913, '1648881418858210612', '人员进出场交通费', '项', 800.00, 1, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1914, '1648881418858200611', '商务成本', '元', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1915, '1648881418858200611', '仪器检定费用', '元', 2800.00, 1, 2800.00, 2800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1916, '1648881418858200611', '其它成本', '元', 40000.00, 1, 40000.00, 40000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1917, '1648881418858190610', '住宿成本', '天', 300.00, 8, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1918, '1648881418858190610', '用餐成本', '天', 300.00, 8, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1919, '1648881418858190610', '车辆加油费', '天', 200.00, 8, 1600.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1920, '1648881418858180609', '桐子林外观', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1921, '1648881418858180609', '二滩外观水准', '人天', 120.00, 50, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1922, '1648881418858180609', '内观人员工资', '月', 3750.00, 2, 7500.00, 7500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1923, '1648881418858180609', '车辆费用', '项', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1924, '1648881418858180609', '人员进出场交通费', '人次', 268.00, 10, 2680.00, 2680.00);
INSERT INTO `cmc_borrow_detail` VALUES (1925, '1648881418858180609', '现场人员生活费', '人月', 1000.00, 6, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1926, '1648881418858180609', '金龙山季度观测', '项', 24500.00, 1, 24500.00, 24500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1927, '1648881418858170608', '培训费', NULL, 1.00, 1, 580.00, 580.00);
INSERT INTO `cmc_borrow_detail` VALUES (1928, '1648881418858160607', '学会、协会会费', '1', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1929, '1648881418858150606', '用餐成本', '人/月', 1000.00, 6, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1930, '1648881418858150606', '耗材成本', '月', 1800.00, 1, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1931, '1648881418858150606', '车辆成本', '月', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1932, '1648881418858150606', '租房中介费', '次', 1200.00, 1, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1933, '1648881418858150606', '租房', '季度', 3600.00, 1, 3600.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1934, '1648881418858150606', '租房押金', '次', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1935, '1648881418858150606', '水电气网', '月', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1936, '1648881418858150606', '疫情突击采购厨具等', '次', 700.00, 1, 700.00, 700.00);
INSERT INTO `cmc_borrow_detail` VALUES (1937, '1648881418858140605', '租车', '人天', 600.00, 12, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1938, '1648881418858140605', '机票', '项', 1100.00, 3, 3300.00, 3300.00);
INSERT INTO `cmc_borrow_detail` VALUES (1939, '1648881418858140605', '住宿成本', '人/天', 100.00, 48, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1940, '1648881418858140605', '用餐成本', '人/天', 100.00, 48, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1941, '1648881418858130604', '其它成本', '元', 10000.00, 2, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1942, '1648881418858120603', '住宿成本', '人.天', 80.00, 57, 4560.00, 4560.00);
INSERT INTO `cmc_borrow_detail` VALUES (1943, '1648881418858120603', '用餐成本', '人.天', 100.00, 60, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1944, '1648881418858120603', '民工费', '人.天', 240.00, 20, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1945, '1648881418858120603', '车辆加油费', '项', 4640.00, 1, 4640.00, 4640.00);
INSERT INTO `cmc_borrow_detail` VALUES (1946, '1648881418858110602', '担保费', '次', 800.00, 1, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1947, '1648881418858100601', '项目现场开支', '元', NULL, 1, 50000.00, 50000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1948, '1648881418858090600', '咨询费', '次', 4450.00, 1, 4450.00, 4450.00);
INSERT INTO `cmc_borrow_detail` VALUES (1949, '1648881418858080599', '培训费', '元', 580.00, 1, 580.00, 580.00);
INSERT INTO `cmc_borrow_detail` VALUES (1950, '1648881418858070598', '桐子林外观', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1951, '1648881418858070598', '二滩外观水准', '人天', 120.00, 50, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1952, '1648881418858070598', '内观固定人员工资', '人月', 4250.00, 2, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1953, '1648881418858070598', '车辆费用', '项', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1954, '1648881418858070598', '现场人员生活开支', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1955, '1648881418858070598', '人员进出场交通费', '人次', 268.00, 10, 2680.00, 2680.00);
INSERT INTO `cmc_borrow_detail` VALUES (1956, '1648881418858060597', '第三者责任险（50万）', '元', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1957, '1648881418858060597', 'D2000S机身险', '元', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1958, '1648881418858060597', 'D-LIDAR2000载荷险', '元', 8000.00, 1, 8000.00, 8000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1959, '1648881418858050596', '车辆加油费', '公里', 80.00, 10, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1960, '1648881418858050596', '用餐成本', '人天', 100.00, 6, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1961, '1648881418858050596', '住宿成本', '人/天', 100.00, 6, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1962, '1648881418858040595', '担保费', '次', 14932.00, 1, 14932.00, 14932.00);
INSERT INTO `cmc_borrow_detail` VALUES (1963, '1648881418858030594', '用餐成本', '人.天', 100.00, 10, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1964, '1648881418858030594', '住宿成本', '人.天', 100.00, 10, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1965, '1648881418858030594', '租车', '天.元', 800.00, 2, 1600.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1966, '1648881418858030594', '进出场动车费用', '人', 600.00, 4, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1967, '1648881418858020593', '保险费', '元', NULL, NULL, 2902.17, 2902.17);
INSERT INTO `cmc_borrow_detail` VALUES (1968, '1648881418858010592', '已经垫资费用', '项', 6500.00, 1, 6500.00, 6500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1969, '1648881418858010592', '住宿成本', '人.天', 80.00, 220, 17600.00, 13200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1970, '1648881418858010592', '用餐成本', '人.天', 120.00, 220, 26400.00, 19800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1971, '1648881418858010592', '车辆加油费', '项', 150.00, 55, 8250.00, 8250.00);
INSERT INTO `cmc_borrow_detail` VALUES (1972, '1648881418858000591', '招标网站会员费', '元', 6688.00, 1, 6688.00, 6688.00);
INSERT INTO `cmc_borrow_detail` VALUES (1973, '1648881418857990590', '实习生工资1-4月', '次', 12420.00, 1, 12420.00, 12420.00);
INSERT INTO `cmc_borrow_detail` VALUES (1974, '1648881418857980589', '其它成本', '元', 10000.00, 2, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1975, '1648881418857970588', '住宿成本', '1', 100.00, 20, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1976, '1648881418857970588', '用餐成本', '1', 100.00, 20, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1977, '1648881418857970588', '车辆加油费', '1', 200.00, 10, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1978, '1648881418857970588', '坐标转换费用', '1', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1979, '1648881418857960587', '保险费', NULL, NULL, NULL, 3236.80, 3236.80);
INSERT INTO `cmc_borrow_detail` VALUES (1980, '1648881418857950586', '住宿成本', '人天', 300.00, 9, 2700.00, 2700.00);
INSERT INTO `cmc_borrow_detail` VALUES (1981, '1648881418857950586', '用餐成本', '人天', 200.00, 9, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (1982, '1648881418857950586', '车辆加油费', '项', 350.00, 9, 3150.00, 3150.00);
INSERT INTO `cmc_borrow_detail` VALUES (1983, '1648881418857940585', '100000', '元', NULL, 1, 100000.00, 100000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1984, '1648881418857930584', '用餐成本', '人.天', 80.00, 188, 15040.00, 11280.00);
INSERT INTO `cmc_borrow_detail` VALUES (1985, '1648881418857930584', '住宿成本', '人.天', 80.00, 188, 15040.00, 11280.00);
INSERT INTO `cmc_borrow_detail` VALUES (1986, '1648881418857930584', '租车', '天.元', 750.00, 32, 24000.00, 24000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1987, '1648881418857930584', '物资采购费', '项', 2930.00, 1, 2930.00, 2930.00);
INSERT INTO `cmc_borrow_detail` VALUES (1988, '1648881418857930584', '资料打印、装订费', '项', 600.00, 1, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (1989, '1648881418857930584', '杨晶2022年3月查勘现场', '天.元', 300.00, 4, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (1990, '1648881418857930584', '无人船设备托运费', '项', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1991, '1648881418857920583', '机票', '人', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1992, '1648881418857920583', '车辆加油费', '项', 15000.00, 1, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1993, '1648881418857920583', '用餐成本', '人天', 100.00, 54, 5400.00, 5400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1994, '1648881418857920583', '住宿成本', '人天', 100.00, 54, 5400.00, 5400.00);
INSERT INTO `cmc_borrow_detail` VALUES (1995, '1648881418857920583', '租车', '天', 500.00, 3, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1996, '1648881418857910582', '桐子林外观', '人天', 28.00, 120, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (1997, '1648881418857910582', '二滩外观水准', '人天', 50.00, 120, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (1998, '1648881418857910582', '内观固定人员工资', '月', 4250.00, 2, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (1999, '1648881418857910582', '车辆费用', '辆', 2000.00, 2, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2000, '1648881418857910582', '常驻人员生活费', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2001, '1648881418857910582', '聘用司机预发', '月', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2002, '1648881418857910582', '交通费用', '人次', 268.00, 8, 2144.00, 2144.00);
INSERT INTO `cmc_borrow_detail` VALUES (2003, '1648881418857910582', '金龙山外观', '项', 24500.00, 1, 24500.00, 24500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2004, '1648881418857910582', '二滩平面观测', '人天', 28.00, 120, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (2005, '1648881418857900581', '住宿成本', '人天', 300.00, 8, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2006, '1648881418857900581', '用餐成本', '人天', 260.00, 8, 2080.00, 2080.00);
INSERT INTO `cmc_borrow_detail` VALUES (2007, '1648881418857900581', '车辆加油费', '天', 450.00, 8, 3600.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2008, '1648881418857890580', '住宿成本', '间', 150.00, 40, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2009, '1648881418857890580', '用餐成本', '天', 60.00, 60, 3600.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2010, '1648881418857890580', '车辆加油费', NULL, NULL, NULL, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2011, '1648881418857890580', '界桩制作费', NULL, 300.00, 170, 51000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2012, '1648881418857880579', '审查成本', '1', 28000.00, 1, 28000.00, 28000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2013, '1648881418857870578', '其它成本', '1', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2014, '1648881418857860577', '其它成本', NULL, 10000.00, 11, 110000.00, 110000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2015, '1648881418857850576', '租车', '元', 23000.00, 1, 23000.00, 23000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2016, '1648881418857850576', '人员成本', '元', 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2017, '1648881418857850576', '外包劳务成本', '元', 100000.00, 1, 100000.00, 100000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2018, '1648881418857850576', '商务成本', '元', 25000.00, 1, 25000.00, 25000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2019, '1648881418857850576', '保障成本', '元', 50000.00, 1, 50000.00, 50000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2020, '1648881418857840575', '用餐成本', '人天', 150.00, 45, 6750.00, 6750.00);
INSERT INTO `cmc_borrow_detail` VALUES (2021, '1648881418857840575', '住宿成本', '人天', 150.00, 42, 6300.00, 6300.00);
INSERT INTO `cmc_borrow_detail` VALUES (2022, '1648881418857840575', '租车', '天', 1000.00, 15, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2023, '1648881418857840575', '车辆加油费', '天', 300.00, 15, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2024, '1648881418857830574', '其它成本', NULL, 1000.00, 40, 40000.00, 40000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2025, '1648881418857820573', '差旅费', '次', 50000.00, 1, 50000.00, 50000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2026, '1648881418857810572', '用餐成本', '人', 1000.00, 6, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2027, '1648881418857810572', '车辆成本', '辆', 1000.00, 2, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2028, '1648881418857810572', '办公用品成本', '月', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2029, '1648881418857810572', '住宿成本', '月', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2030, '1648881418857810572', '临时用工成本', '次', 44070.00, 1, 43936.00, 43936.00);
INSERT INTO `cmc_borrow_detail` VALUES (2031, '1648881418857810572', '水电气网', '月', 1000.00, 1, 996.00, 996.00);
INSERT INTO `cmc_borrow_detail` VALUES (2032, '1648881418857810572', '印刷费', '次', 32791.00, 1, 32568.00, 32568.00);
INSERT INTO `cmc_borrow_detail` VALUES (2033, '1648881418857800571', '机票', '元', 1800.00, 6, 10800.00, 10800.00);
INSERT INTO `cmc_borrow_detail` VALUES (2034, '1648881418857800571', '住宿成本', '元', 200.00, 20, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2035, '1648881418857800571', '租车', '元', 600.00, 10, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2036, '1648881418857800571', '用餐成本', '元', 200.00, 10, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2037, '1648881418857790570', '中标服务费', '元', 30272.00, 1, 30272.00, 30272.00);
INSERT INTO `cmc_borrow_detail` VALUES (2038, '1648881418857780569', '增值税税金', '1', 240000.00, 1, 240000.00, 240000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2039, '1648881418857770568', '标书购买费', '元', 200.00, 1, 200.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2040, '1648881418857760567', '中标服务费', '元', 2662.00, 1, 2662.00, 2662.00);
INSERT INTO `cmc_borrow_detail` VALUES (2041, '1648881418857750566', '招聘平台服务费', NULL, NULL, NULL, 5680.00, 5680.00);
INSERT INTO `cmc_borrow_detail` VALUES (2042, '1648881418857740565', '第三者责任险（保额50万）', '元', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2043, '1648881418857740565', '机身险', '元', 10500.00, 1, 10500.00, 10500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2044, '1648881418857740565', '载荷险', '元', 8400.00, 1, 8400.00, 8400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2045, '1648881418857730564', '光纤费用', '元', 866.00, 6, 5196.00, 5196.00);
INSERT INTO `cmc_borrow_detail` VALUES (2046, '1648881418857720563', '三者险', '元', 3500.00, 1, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2047, '1648881418857720563', '机身险', '元', 21000.00, 1, 21000.00, 21000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2048, '1648881418857710562', '用餐成本', '人.天', 60.00, 72, 4320.00, 4320.00);
INSERT INTO `cmc_borrow_detail` VALUES (2049, '1648881418857710562', '住宿成本', '人.天', 70.00, 72, 5040.00, 5040.00);
INSERT INTO `cmc_borrow_detail` VALUES (2050, '1648881418857710562', '车辆加油费', '人.天', 100.00, 14, 1400.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2051, '1648881418857700561', '车辆加油费', NULL, NULL, NULL, 1046.00, 1046.00);
INSERT INTO `cmc_borrow_detail` VALUES (2052, '1648881418857700561', '用餐成本', NULL, NULL, NULL, 476.00, 476.00);
INSERT INTO `cmc_borrow_detail` VALUES (2053, '1648881418857700561', '住宿成本', NULL, NULL, NULL, 458.00, 458.00);
INSERT INTO `cmc_borrow_detail` VALUES (2054, '1648881418857700561', '其它成本', NULL, NULL, NULL, 36.00, 36.00);
INSERT INTO `cmc_borrow_detail` VALUES (2055, '1648881418857690560', '临时工人意外险', '人', 800.00, 12, 9600.00, 9600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2056, '1648881418857680559', '标书购买费', '1', 200.00, 1, 200.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2057, '1648881418857670558', '车辆加油费', NULL, NULL, NULL, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2058, '1648881418857670558', '用餐成本', NULL, 70.00, 50, 3500.00, 3500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2059, '1648881418857670558', '住宿成本', NULL, NULL, NULL, 3114.00, 3114.00);
INSERT INTO `cmc_borrow_detail` VALUES (2060, '1648881418857670558', '其它成本', NULL, NULL, NULL, 400.00, 400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2061, '1648881418857660557', '项目管理费', NULL, NULL, NULL, 43000.00, 43000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2062, '1648881418857650556', '担保费', '次', 30000.00, 1, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2063, '1648881418857640555', '其它成本', NULL, 10000.00, 15, 150000.00, 150000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2064, '1648881418857630554', '交通成本', NULL, NULL, NULL, 112000.00, 112000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2065, '1648881418857620553', '专利年费', '1', 1195.00, NULL, 1195.00, 1195.00);
INSERT INTO `cmc_borrow_detail` VALUES (2066, '1648881418857610552', '用餐成本', '人.天', 70.00, 15, 1050.00, 1050.00);
INSERT INTO `cmc_borrow_detail` VALUES (2067, '1648881418857610552', '住宿成本', '人.天', 80.00, 12, 960.00, 960.00);
INSERT INTO `cmc_borrow_detail` VALUES (2068, '1648881418857610552', '车辆加油费', '天', 200.00, 5, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2069, '1648881418857600551', '地下管网内窥前期费用', '元', 100000.00, 1, 100000.00, 100000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2070, '1648881418857600551', '现场项目开展费用', '元', 70000.00, 1, 70000.00, 70000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2071, '1648881418857590550', '用餐成本', '人.天', 70.00, 12, 840.00, 840.00);
INSERT INTO `cmc_borrow_detail` VALUES (2072, '1648881418857590550', '住宿成本', '人.天', 80.00, 9, 720.00, 720.00);
INSERT INTO `cmc_borrow_detail` VALUES (2073, '1648881418857590550', '车辆加油费', '天.元', 250.00, 4, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2074, '1648881418857590550', '购买千寻网络RTK单日账号', '天.元', 18.00, 2, 36.00, 36.00);
INSERT INTO `cmc_borrow_detail` VALUES (2075, '1648881418857580549', '住宿成本', '人天', 100.00, 24, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2076, '1648881418857580549', '用餐成本', '人天', 100.00, 27, 2700.00, 2700.00);
INSERT INTO `cmc_borrow_detail` VALUES (2077, '1648881418857580549', '交通成本', '项', 1600.00, 1, 1400.00, 1400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2078, '1648881418857580549', '卫片购买', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2079, '1648881418857570548', '其它成本', NULL, NULL, NULL, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2080, '1648881418857560547', '用餐成本', '人.天', 80.00, 15, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2081, '1648881418857560547', '住宿成本', '人.天', 100.00, 12, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2082, '1648881418857560547', '车辆加油费', '天.元', 100.00, 6, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2083, '1648881418857550546', '用餐成本', '人.天', 80.00, 80, 6400.00, 6400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2084, '1648881418857550546', '住宿成本', '人.天', 50.00, 80, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2085, '1648881418857550546', '车辆加油费', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2086, '1648881418857550546', '租船', '项', 10000.00, 1, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2087, '1648881418857550546', '其他备用金', '项', 2600.00, 1, 2600.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (2088, '1648881418857540545', '住宿成本', '人.天', 100.00, 24, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2089, '1648881418857540545', '用餐成本', '人.天', 112.00, 28, 3136.00, 3136.00);
INSERT INTO `cmc_borrow_detail` VALUES (2090, '1648881418857540545', '现场租车', '天', 1000.00, 7, 7000.00, 7000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2091, '1648881418857540545', '租车油费', '项', 905.00, 1, 905.00, 905.00);
INSERT INTO `cmc_borrow_detail` VALUES (2092, '1648881418857540545', '民工费', '项', 150.00, 1, 150.00, 150.00);
INSERT INTO `cmc_borrow_detail` VALUES (2093, '1648881418857530544', '用餐成本', '人.天', 80.00, 9, 720.00, 720.00);
INSERT INTO `cmc_borrow_detail` VALUES (2094, '1648881418857530544', '住宿成本', '人.天', 80.00, 6, 480.00, 480.00);
INSERT INTO `cmc_borrow_detail` VALUES (2095, '1648881418857530544', '车辆加油费', '项', 300.00, 1, 300.00, 300.00);
INSERT INTO `cmc_borrow_detail` VALUES (2096, '1648881418857520543', '保险费', NULL, NULL, NULL, 1098.20, 1098.20);
INSERT INTO `cmc_borrow_detail` VALUES (2097, '1648881418857510542', '用餐成本', '人.天', 100.00, 12, 1200.00, 780.00);
INSERT INTO `cmc_borrow_detail` VALUES (2098, '1648881418857510542', '住宿成本', '人.天', 60.00, 9, 540.00, 540.00);
INSERT INTO `cmc_borrow_detail` VALUES (2099, '1648881418857510542', '车辆加油费', '天.元', 200.00, 4, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (2100, '1648881418857510542', 'SCCORS中心正常计算费用', '元', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2101, '1648881418857500541', '保险费', NULL, NULL, 7, 6473.60, 6473.60);
INSERT INTO `cmc_borrow_detail` VALUES (2102, '1648881418857490540', '党务活动', NULL, NULL, NULL, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2103, '1648881418857480539', '桐子林外观测量', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (2104, '1648881418857480539', '二滩大坝外观测量', '人天', 120.00, 50, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2105, '1648881418857480539', '内观人员工资', '月', 4250.00, 2, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2106, '1648881418857480539', '车辆费用', '项', 3000.00, 1, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2107, '1648881418857480539', '常驻人员生活费', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2108, '1648881418857480539', '聘用司机工资', '月', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2109, '1648881418857480539', '进出场交通费', '人', 300.00, 8, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2110, '1648881418857480539', '工人体检', '人', 200.00, 13, 2600.00, 2600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2111, '1648881418857480539', '营地搬迁办公用品采购', '项', 40000.00, 1, 40000.00, 40000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2112, '1648881418857470538', '其它成本', '1', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2113, '1648881418857460537', '中标服务费', '元', 2685.00, 1, 2685.00, 2685.00);
INSERT INTO `cmc_borrow_detail` VALUES (2114, '1648881418857450536', '生活成本', '项', 6200.00, 1, 6200.00, 6200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2115, '1648881418857450536', '车辆燃油费（含简易维修）', '项', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2116, '1648881418857450536', '人生意外伤害险', '项', 1300.00, 1, 1300.00, 1300.00);
INSERT INTO `cmc_borrow_detail` VALUES (2117, '1648881418857450536', '库区及枢纽区观测民工费', '人工', 200.00, 36, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2118, '1648881418857450536', '监测控制网观测（水准）', '人工', 200.00, 44, 8800.00, 8800.00);
INSERT INTO `cmc_borrow_detail` VALUES (2119, '1648881418857450536', '监测控制网观测（平面）', '人工', 200.00, 6, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2120, '1648881418857450536', '人员进出场交通费', '项', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2121, '1648881418857450536', '墩标重新刷漆喷字费用', '项', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2122, '1648881418857440535', NULL, NULL, NULL, NULL, 80000.00, 80000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2123, '1648881418857430534', '中标服务费', '元', 106130.55, 1, 106130.60, 106130.60);
INSERT INTO `cmc_borrow_detail` VALUES (2124, '1648881418857420533', '培训费', NULL, 1000.00, 4, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2125, '1648881418857410532', '用餐成本', '人.天', 100.00, 6, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2126, '1648881418857410532', '住宿成本', '人.天', 100.00, 6, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2127, '1648881418857410532', '车辆加油费', '天.元', 200.00, 2, 400.00, 400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2128, '1648881418857400531', '用餐成本', '人', 1000.00, 11, 11000.00, 8700.00);
INSERT INTO `cmc_borrow_detail` VALUES (2129, '1648881418857400531', '车辆成本', '辆', 2500.00, 2, 5000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2130, '1648881418857400531', '耗材成本', '月', 600.00, 1, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2131, '1648881418857400531', '住宿成本', '月', 600.00, 1, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2132, '1648881418857400531', '临时用工成本', '人', 3500.00, 2, 7000.00, 7000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2133, '1648881418857400531', '实习生', '人', 2000.00, 7, 14000.00, 14000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2134, '1648881418857400531', '水电气网', '月', 1200.00, 1, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2135, '1648881418857400531', '交通成本', '人', 150.00, 7, 1050.00, 1050.00);
INSERT INTO `cmc_borrow_detail` VALUES (2136, '1648881418857400531', '印刷费（补10月）', '次', 3850.00, 1, 3850.00, 3850.00);
INSERT INTO `cmc_borrow_detail` VALUES (2137, '1648881418857390530', '住宿成本', '人天', 240.00, 10, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2138, '1648881418857390530', '用餐成本', '人天', 260.00, 10, 2600.00, 2600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2139, '1648881418857390530', '车辆加油费', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2140, '1648881418857380529', '标书购买费', '元', 200.00, 1, 200.00, 200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2141, '1648881418857370528', '用餐成本', '人/天', 70.00, 15, 1050.00, 1050.00);
INSERT INTO `cmc_borrow_detail` VALUES (2142, '1648881418857370528', '住宿成本', '人/天', 80.00, 15, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2143, '1648881418857370528', '车辆加油费', '天/元', 200.00, 5, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2144, '1648881418857360527', '生活成本', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2145, '1648881418857360527', '车辆燃油费（含保养及简易维修）', '项', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2146, '1648881418857360527', '库区及枢纽区观测民工费', '人工', 200.00, 24, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (2147, '1648881418857360527', '人员进出场交通费', '项', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2148, '1648881418857350526', '学会、协会会费', '1', 13000.00, 1, 13000.00, 13000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2149, '1648881418857340525', '专利年费', '1', 140.00, 1, 140.00, 140.00);
INSERT INTO `cmc_borrow_detail` VALUES (2150, '1648881418857330524', NULL, NULL, NULL, NULL, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2151, '1648881418857320523', '用餐成本', '人.天', 100.00, 150, 15000.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2152, '1648881418857320523', '住宿成本', '人.天', 40.00, 150, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2153, '1648881418857320523', '租车（含油费）', '天.元', 750.00, 10, 7500.00, 7500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2154, '1648881418857320523', '大通越野车加油费', '天.元', 100.00, 60, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2155, '1648881418857320523', '大通越野车保养', '元', 880.00, 1, 880.00, 880.00);
INSERT INTO `cmc_borrow_detail` VALUES (2156, '1648881418857320523', '大通越野车更换越野胎', '元', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2157, '1648881418857320523', '人员轮休往返机票费用', '人.次', 1500.00, 14, 21000.00, 21000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2158, '1648881418857310522', '车辆加油费', '元', 1778.00, 1, 1778.00, 1778.00);
INSERT INTO `cmc_borrow_detail` VALUES (2159, '1648881418857310522', '用工成本', '人.天', 150.00, 20, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2160, '1648881418857310522', '用餐成本', '人.天', 100.00, 30, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2161, '1648881418857310522', '住宿成本', '人.天', 80.00, 30, 2400.00, 2400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2162, '1648881418857310522', '青苗补偿费用', '元', 1600.00, 1, 1600.00, 1600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2163, '1648881418857300521', '车辆加油费', '元', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2164, '1648881418857300521', '用餐成本', '人.天', 110.00, 30, 3300.00, 3300.00);
INSERT INTO `cmc_borrow_detail` VALUES (2165, '1648881418857300521', '住宿成本', '人.天', 150.00, 20, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2166, '1648881418857300521', '车辆维修费', '元', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2167, '1648881418857300521', '委外单位食宿费用', '元', 1000.00, 1, 1000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (2168, '1648881418857290520', '中标服务费', '元', 17286.00, 1, 17286.00, 17286.00);
INSERT INTO `cmc_borrow_detail` VALUES (2169, '1648881418857290520', '中标服务费', '元', 10368.00, 1, 10368.00, 10368.00);
INSERT INTO `cmc_borrow_detail` VALUES (2170, '1648881418857280519', '用餐成本', '人.天', 80.00, 18, 1440.00, 1440.00);
INSERT INTO `cmc_borrow_detail` VALUES (2171, '1648881418857280519', '住宿成本', '人.天', 80.00, 18, 1440.00, 1440.00);
INSERT INTO `cmc_borrow_detail` VALUES (2172, '1648881418857280519', '车辆加油费', '元.天', 200.00, 5, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2173, '1648881418857270518', NULL, NULL, NULL, NULL, 48000.00, 48000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2174, '1648881418857260517', '用餐成本', '人.天', 60.00, 10, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2175, '1648881418857260517', '住宿成本', '人.天', 80.00, 5, 400.00, 400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2176, '1648881418857260517', '车辆加油费', '元.天', 510.00, 2, 1020.00, 1020.00);
INSERT INTO `cmc_borrow_detail` VALUES (2177, '1648881418857250516', '生活成本', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2178, '1648881418857250516', '车辆燃油费（含保养及简易维修）', '项', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2179, '1648881418857250516', '库区及枢纽区观测民工费', '人工', 200.00, 36, 7200.00, 7200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2180, '1648881418857250516', '人员进出场交通费', '项', 1200.00, 1, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2181, '1648881418857250516', '春节拜访及其他商务费用', '项', 30000.00, 1, 30000.00, 30000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2182, '1648881418857240515', '住宿成本', '人.天', 450.00, 4, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (2183, '1648881418857240515', '用餐成本', '人.天', 450.00, 4, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (2184, '1648881418857240515', '车辆加油费', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2185, '1648881418857230514', '用餐成本', '人天', 120.00, 35, 4200.00, 4200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2186, '1648881418857230514', '住宿成本', '人天', 100.00, 30, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2187, '1648881418857230514', '车辆加油费', '项', 1800.00, 1, 1800.00, 1800.00);
INSERT INTO `cmc_borrow_detail` VALUES (2188, '1648881418857220513', '担保费', '次', 49820.99, 1, 49820.99, 49820.99);
INSERT INTO `cmc_borrow_detail` VALUES (2189, '1648881418857210512', '商务成本', NULL, NULL, NULL, 10000.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2190, '1648881418857200511', '其它成本', NULL, 20000.00, 1, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2191, '1648881418857190510', '进出场交通费', '人/元', 1500.00, 4, 6000.00, 5600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2192, '1648881418857190510', '生活成本', '人/天', 120.00, 90, 10800.00, 9900.00);
INSERT INTO `cmc_borrow_detail` VALUES (2193, '1648881418857190510', '住宿成本', '人/天', 150.00, 60, 9000.00, 9000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2194, '1648881418857190510', '打车或租车现场作业', '天', 150.00, 30, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2195, '1648881418857190510', '其他费用', '项', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2196, '1648881418857180509', '委外配合结算', '项', 6500.00, 1, 6500.00, 6500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2197, '1648881418857170508', '车辆加油费', '元', 100.00, 10, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2198, '1648881418857170508', '用餐成本', '元', 200.00, 10, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2199, '1648881418857170508', '住宿成本', '元', 200.00, 20, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2200, '1648881418857170508', '用工成本', '元', 150.00, 20, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2201, '1648881418857160507', '用餐成本', '月', 1500.00, 5, 7500.00, 7500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2202, '1648881418857160507', '车辆成本', '月', 2500.00, 2, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2203, '1648881418857160507', '印刷费', '月', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2204, '1648881418857160507', '办公采购', '月', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2205, '1648881418857160507', '水电气网', '月', 1000.00, 1, 1000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2206, '1648881418857150506', '项目现场开支', '元', NULL, 1, 50000.00, 50000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2207, '1648881418857140505', '住宿成本', '1', 120.00, 10, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2208, '1648881418857140505', '用餐成本', '1', 100.00, 20, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2209, '1648881418857140505', '车辆加油费', '1', 180.00, 5, 900.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2210, '1648881418857130504', '学会、协会会费', '年', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2211, '1648881418857120503', '学会、协会会费', '年', 5000.00, 4, 20000.00, 20000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2212, '1648881418857110502', '用餐成本', '人', 750.00, 6, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2213, '1648881418857110502', '车辆成本', '辆', 1000.00, 2, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2214, '1648881418857110502', '1楼门面房租', '季度', 1625.00, 2, 3250.00, 3250.00);
INSERT INTO `cmc_borrow_detail` VALUES (2215, '1648881418857110502', '实习生', '月', 2300.00, 1, 2300.00, 2300.00);
INSERT INTO `cmc_borrow_detail` VALUES (2216, '1648881418857110502', '临时用工成本', '月', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2217, '1648881418857110502', '水电气网', '月', 1500.00, 1, 1500.00, 1500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2218, '1648881418857110502', '印刷费', '次', 1450.00, 1, 1450.00, 1450.00);
INSERT INTO `cmc_borrow_detail` VALUES (2219, '1648881418857100501', '中标服务费', '元', 23037.00, 1, 23037.00, 23037.00);
INSERT INTO `cmc_borrow_detail` VALUES (2220, '1648881418857090500', '车辆加油费', '月', NULL, NULL, 3000.00, 3000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2221, '1648881418857090500', '用餐成本', '月', NULL, NULL, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2222, '1648881418857090500', '住宿成本', '月', 600.00, NULL, 600.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2223, '1648881418857090500', '租车', '天', 150.00, 30, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2224, '1648881418857080499', '桐子林外观', '人工', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (2225, '1648881418857080499', '二滩外观', '人工', 120.00, 55, 6600.00, 6600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2226, '1648881418857080499', '内观固定人员工资', '月', 3750.00, 2, 7500.00, 7500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2227, '1648881418857080499', '聘请司机工资', '月', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2228, '1648881418857080499', '人员生活及其他开支', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2229, '1648881418857080499', '交通费', '次', 268.00, 6, 1608.00, 1608.00);
INSERT INTO `cmc_borrow_detail` VALUES (2230, '1648881418857080499', '车辆费用', '项', 5500.00, 1, 5500.00, 5500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2231, '1648881418857080499', '金龙山季度观测', '项', 24500.00, 1, 24500.00, 24500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2232, '1648881418857070498', '商务成本', NULL, NULL, NULL, 15900.00, 15900.00);
INSERT INTO `cmc_borrow_detail` VALUES (2233, '1648881418857060497', '用餐成本', '人.天', 70.00, 9, 630.00, 630.00);
INSERT INTO `cmc_borrow_detail` VALUES (2234, '1648881418857060497', '住宿成本', '人.天', 70.00, 6, 420.00, 420.00);
INSERT INTO `cmc_borrow_detail` VALUES (2235, '1648881418857060497', '交通成本', '项', 450.00, 1, 450.00, 450.00);
INSERT INTO `cmc_borrow_detail` VALUES (2236, '1648881418857050496', '劳保用品', '顶', 65.00, 20, 1300.00, 1300.00);
INSERT INTO `cmc_borrow_detail` VALUES (2237, '1648881418857040495', '桐子林外观', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (2238, '1648881418857040495', '二滩水准观测', '人天', 120.00, 55, 6600.00, 6600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2239, '1648881418857040495', '二滩季度平面观测', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (2240, '1648881418857040495', '二滩控制网年度复测', '人天', 120.00, 162, 19440.00, 19440.00);
INSERT INTO `cmc_borrow_detail` VALUES (2241, '1648881418857040495', '车辆费用', '项', 7800.00, 1, 7800.00, 7800.00);
INSERT INTO `cmc_borrow_detail` VALUES (2242, '1648881418857040495', '项目部聘用人员工资', '人', 3800.00, 3, 11400.00, 11400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2243, '1648881418857040495', '常驻人员生活开支', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2244, '1648881418857040495', '购买安全帽', '人', 60.00, 20, 1200.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (2245, '1648881418857040495', '交通费用', '人', 358.00, 2, 716.00, 716.00);
INSERT INTO `cmc_borrow_detail` VALUES (2246, '1648881418857030494', '用餐成本', '人/天', 120.00, 248, 29760.00, 15000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2247, '1648881418857030494', '住宿成本', '人/天', 60.00, 248, 14880.00, 10000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2248, '1648881418857030494', '车辆加油费', '元/天', 60.00, 31, 1860.00, 1860.00);
INSERT INTO `cmc_borrow_detail` VALUES (2249, '1648881418857030494', '用工成本', '人/天', 250.00, 92, 23000.00, 23000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2250, '1648881418857030494', '民工保险费', '人/元', 350.00, 6, 2100.00, 2100.00);
INSERT INTO `cmc_borrow_detail` VALUES (2251, '1648881418857030494', '施工材料（水泥、河沙等）', '项', 800.00, 1, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (2252, '1648881418857020493', '其它成本', NULL, 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2253, '1648881418857010492', '用餐成本', '人/天', 60.00, 350, 21000.00, 21000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2254, '1648881418857010492', '住宿成本', '人/天', 50.00, 350, 17500.00, 17500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2255, '1648881418857010492', '现场租车', '天', 750.00, 50, 37500.00, 37500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2256, '1648881418857010492', '机票', '人/员', 2200.00, 14, 30800.00, 28000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2257, '1648881418857010492', '用工成本', '人/天', 280.00, 180, 50400.00, 50400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2258, '1648881418857010492', '工人保险费', '人/元', 200.00, 4, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (2259, '1648881418857010492', '车辆加油费', '元/天', 200.00, 48, 9600.00, 9600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2260, '1648881418857000491', '用餐成本', '人/天', 100.00, 20, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2261, '1648881418857000491', '住宿成本', '人/天', 60.00, 16, 960.00, 960.00);
INSERT INTO `cmc_borrow_detail` VALUES (2262, '1648881418857000491', '车辆加油费', '天/元', 180.00, 5, 900.00, 600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2263, '1648881418857000491', 'SCCORS中心正常计算费用', '元', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2264, '1648881418856990490', '用餐成本', '人/天', 100.00, 28, 2800.00, 2800.00);
INSERT INTO `cmc_borrow_detail` VALUES (2265, '1648881418856990490', '住宿成本', '人/天', 60.00, 28, 1680.00, 1680.00);
INSERT INTO `cmc_borrow_detail` VALUES (2266, '1648881418856990490', '车辆加油费', '天/元', 180.00, 7, 1260.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (2267, '1648881418856990490', 'SCCORS中心正常计算费用', '元', 500.00, 1, 500.00, 500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2268, '1648881418856990490', '核酸检测费', '人/元', 40.00, 4, 160.00, 160.00);
INSERT INTO `cmc_borrow_detail` VALUES (2269, '1648881418856980489', '住宿成本', '1', 120.00, 14, 1680.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2270, '1648881418856980489', '车辆加油费', '1', 180.00, 7, 1260.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2271, '1648881418856980489', '用餐成本', '1', 100.00, 28, 2800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2272, '1648881418856980489', '核酸检测', '1', 40.00, 4, 160.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2273, '1648881418856970488', '机动船租赁费', '元', 1500.00, 3, 4500.00, 4500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2274, '1648881418856970488', '用餐成本（激光技术部）', '人.天', 60.00, 64, 3840.00, 3840.00);
INSERT INTO `cmc_borrow_detail` VALUES (2275, '1648881418856970488', '住宿成本（激光技术部）', '人.天', 70.00, 64, 4480.00, 4480.00);
INSERT INTO `cmc_borrow_detail` VALUES (2276, '1648881418856970488', '车辆加油费（激光技术部）', '天.元', 50.00, 64, 3200.00, 3200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2277, '1648881418856970488', '民工费', '人.天', 150.00, 24, 3600.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (2278, '1648881418856970488', '民工保险', '元', 200.00, 4, 800.00, 800.00);
INSERT INTO `cmc_borrow_detail` VALUES (2279, '1648881418856970488', '用餐成本', '人.天', 60.00, 100, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2280, '1648881418856970488', '住宿成本', '人.天', 70.00, 100, 7000.00, 7000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2281, '1648881418856970488', '车辆加油费', '天.元', 100.00, 20, 2000.00, 1000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2282, '1648881418856960487', '桐子林外观', '人天', 120.00, 28, 3360.00, 3360.00);
INSERT INTO `cmc_borrow_detail` VALUES (2283, '1648881418856960487', '二滩水准观测', '人天', 120.00, 50, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2284, '1648881418856960487', '内观固定人员工资', '月', 4250.00, 2, 8500.00, 8500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2285, '1648881418856960487', '车辆费用', '辆', 2000.00, 2, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2286, '1648881418856960487', '常驻人员现场生活支出', '项', 6000.00, 1, 6000.00, 6000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2287, '1648881418856960487', '聘用司机', '月', 4000.00, 1, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2288, '1648881418856960487', '进出场交通费用', '人', 536.00, 4, 2144.00, 2144.00);
INSERT INTO `cmc_borrow_detail` VALUES (2289, '1648881418856950486', '其它成本', NULL, 10000.00, 4, 35000.00, 35000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2290, '1648881418856940485', 'cors账号年费', '2', 6400.00, 2, 12800.00, 6400.00);
INSERT INTO `cmc_borrow_detail` VALUES (2291, '1648881418856930484', '人员生活成本', '项', 5000.00, 1, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2292, '1648881418856930484', '燃油费', '项', 2500.00, 1, 2500.00, 2500.00);
INSERT INTO `cmc_borrow_detail` VALUES (2293, '1648881418856930484', '进出场交通费', '项', 1200.00, 1, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2294, '1648881418856930484', '观测辅助民工', '人工', 200.00, 25, 5000.00, 5000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2295, '1648881418856930484', '基准网便道清障维护', '项', 2000.00, 1, 2000.00, 2000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2296, '1648881418856920483', '车辆成本', '天', 200.00, 7, 1400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2297, '1648881418856920483', '住宿成本', '人.天', 80.00, 35, 2800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2298, '1648881418856920483', '用餐成本', '人.天', 80.00, 35, 2800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2299, '1648881418856910482', '空域申请费用', '元', 20000.00, 1, 20000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (2300, '1648881418856900481', '其它成本', '项', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2301, '1648881418856890480', '影像购买', '项', 60000.00, 1, 60000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2302, '1648881418856880479', '专利年费', '1', 1200.00, 1, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2303, '1648881418856870478', NULL, NULL, 15000.00, 1, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2304, '1648881418856860477', '中标服务费', '元', 17395.00, 1, 17395.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2305, '1648881418856860477', '专家评审费', '元', 14000.00, 1, 14000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2306, '1648881418856850476', '其它成本', NULL, 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2307, '1648881418856840475', '中标服务费', '元', 78315.63, 1, 78315.63, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2308, '1648881418856830474', '桐子林月度观测', '人天', 120.00, 28, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2309, '1648881418856830474', '二滩外观水准', '人天', 120.00, 55, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2310, '1648881418856830474', '内观固定人员工资', '月', 3750.00, 2, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2311, '1648881418856830474', '车辆费用', '项', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2312, '1648881418856830474', '人员生活费用', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2313, '1648881418856830474', '聘请司机工资', '月', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2314, '1648881418856830474', '桐子林观测便道和观测墩维护', '人工', 120.00, 20, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2315, '1648881418856830474', '二滩观测便道和观测墩维护', '项', 18000.00, 1, 18000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2316, '1648881418856830474', '桐子林基准网观测', '人天', 120.00, 110, 13200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2317, '1648881418856830474', '墩标土建', '个', 4000.00, 2, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2318, '1648881418856820473', '返程机票', NULL, NULL, NULL, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2319, '1648881418856820473', '住宿成本', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2320, '1648881418856820473', '用餐成本', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2321, '1648881418856820473', '交通成本', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2322, '1648881418856820473', '其它成本', NULL, NULL, NULL, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2323, '1648881418856810472', '住宿成本', '间', 100.00, 8, 800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2324, '1648881418856810472', '用餐成本', '天', 150.00, 4, 600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2325, '1648881418856810472', '车辆加油费', '项', 1600.00, 1, 1600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2326, '1648881418856810472', '租船', '天', 600.00, 4, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2327, '1648881418856810472', '民工保险', '项', 600.00, 1, 600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2328, '1648881418856800471', '培训费', '人', 900.00, 3, 2700.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2329, '1648881418856790470', '交通成本', '天', 150.00, 14, 2100.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2330, '1648881418856790470', '用餐成本', '人.天', 70.00, 56, 3920.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2331, '1648881418856790470', '住宿成本', '人.天', 80.00, 56, 4480.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2332, '1648881418856790470', 'SCCORS中心正常计算费用', '项', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2333, '1648881418856780469', '车辆成本', '元', 200.00, 10, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2334, '1648881418856780469', '用餐成本', '元', 260.00, 10, 2600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2335, '1648881418856780469', '住宿成本', '元', 240.00, 10, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2336, '1648881418856770468', '人员设备进出场', '项', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2337, '1648881418856770468', '生活费用', '人天', 90.00, 144, 12960.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2338, '1648881418856770468', '住宿费用', '天', 200.00, 48, 9600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2339, '1648881418856770468', '租车费', '天', 400.00, 42, 16800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2340, '1648881418856770468', '民工费', '人天', 220.00, 200, 44000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2341, '1648881418856770468', '电瓶及数据线购买', '项', 4200.00, 1, 4200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2342, '1648881418856770468', '劳动防护用品', '项', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2343, '1648881418856770468', '其他', '项', 8000.00, 1, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2344, '1648881418856760467', '机票', '人/元', 1600.00, 14, 22400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2345, '1648881418856760467', '用餐成本', '人/天', 100.00, 540, 54000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2346, '1648881418856760467', '住宿成本', '人/天', 80.00, 540, 43200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2347, '1648881418856760467', '租车', '天', 800.00, 60, 48000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2348, '1648881418856760467', '其它成本', '项', 2400.00, 1, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2349, '1648881418856750466', '住宿成本', '人.天', 100.00, 100, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2350, '1648881418856750466', '用餐成本', '人.天', 80.00, 100, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2351, '1648881418856750466', '交通成本', '人.天', 70.00, 100, 7000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2352, '1648881418856740465', '保险费', NULL, NULL, NULL, 1710.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2353, '1648881418856730464', '住宿成本', '人天', 100.00, 36, 3600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2354, '1648881418856730464', '用餐成本', '人天', 100.00, 36, 3600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2355, '1648881418856730464', '车辆成本', '项', 2300.00, 1, 2300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2356, '1648881418856720463', '车辆成本', '天', 200.00, 7, 1400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2357, '1648881418856720463', '用餐成本', '人天', 350.00, 7, 2450.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2358, '1648881418856720463', '住宿成本', '人天', 300.00, 7, 2100.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2359, '1648881418856710462', '用餐成本', '人天', 100.00, 24, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2360, '1648881418856710462', '住宿成本', '人天', 100.00, 21, 2100.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2361, '1648881418856710462', '车辆成本', '项', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2362, '1648881418856710462', '其他', '项', 500.00, 1, 500.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (2363, '1648881418856700461', '用餐成本', '元', 300.00, 8, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2364, '1648881418856700461', '住宿成本', '元', 400.00, 7, 2800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2365, '1648881418856700461', '车辆成本', '元', 250.00, 8, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2366, '1648881418856700461', '用工成本', '元', 300.00, 4, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2367, '1648881418856700461', '静态数据解算及正常高转换费用', '元', 3600.00, 1, 3600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2368, '1648881418856690460', '用餐成本', '人', 1000.00, 9, 9000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2369, '1648881418856690460', '车辆成本', '辆', 2500.00, 2, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2370, '1648881418856690460', '耗材成本', '月', 1200.00, 1, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2371, '1648881418856690460', '用工成本', '人', 4000.00, 6, 24000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2372, '1648881418856690460', '水电气网', '月', 1800.00, 1, 1800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2373, '1648881418856690460', '7人半年保险费', '次', 2675.00, 1, 2675.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2374, '1648881418856680459', '中标服务费', '元', 68850.00, 1, 68850.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2375, '1648881418856670458', '桐子林外观', '人天', 120.00, 28, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2376, '1648881418856670458', '二滩大坝水准', '人天', 120.00, 55, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2377, '1648881418856670458', '内观人员固定工资', '月', 3750.00, 2, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2378, '1648881418856670458', '车辆费用', '项', 3500.00, 1, 3500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2379, '1648881418856670458', '常驻人员生活支出', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2380, '1648881418856670458', '办公及安全投入', '项', 2000.00, 1, 2000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (2381, '1648881418856670458', '进出场交通费用', '人', 536.00, 4, 2144.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2382, '1648881418856670458', '司机工资 ', '月', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2383, '1648881418856660457', '备用金', NULL, 38000.00, 1, 38000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2384, '1648881418856650456', '中标服务费', '元', 1164.74, 1, 1164.70, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2385, '1648881418856640455', '生活成本', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2386, '1648881418856640455', '燃油费', '项', 2500.00, 1, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2387, '1648881418856640455', '进出场交通费', '人次', 1200.00, 1, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2388, '1648881418856640455', '观测辅助民工', '人工', 200.00, 25, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2389, '1648881418856630454', '人员成本', '元', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2390, '1648881418856620453', '其它成本', '项', 18000.00, 1, 18000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2391, '1648881418856610452', NULL, NULL, NULL, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2392, '1648881418856600451', '4人住宿成本', NULL, 120.00, 10, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2393, '1648881418856600451', '来回加油费', NULL, NULL, NULL, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2394, '1648881418856600451', '餐饮成本', NULL, NULL, NULL, 2300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2395, '1648881418856590450', '人员成本', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2396, '1648881418856590450', '车辆成本', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2397, '1648881418856590450', '用餐成本', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2398, '1648881418856590450', '住宿成本', NULL, NULL, NULL, 5000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (2399, '1648881418856580449', '光纤费用', ' 元', 598.00, 1, 598.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2400, '1648881418856580449', '光纤费用', '元', 866.00, 6, 5196.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2401, '1648881418856570448', '桐子林外观', '人天', 120.00, 28, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2402, '1648881418856570448', '二滩水准观测', '人天', 120.00, 55, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2403, '1648881418856570448', '二滩平面观测', '人天', 120.00, 28, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2404, '1648881418856570448', '金龙山季度观测', '项', 24500.00, 1, 24500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2405, '1648881418856570448', '驾驶员工资', '月', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2406, '1648881418856570448', '内关人员固定工资', '月', 3750.00, 2, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2407, '1648881418856570448', '车辆费用', '项', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2408, '1648881418856570448', '常驻人员生活费', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2409, '1648881418856570448', '进出场交通费', '月', 538.00, 4, 2152.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2410, '1648881418856560447', '保险费', NULL, NULL, NULL, 687.60, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2411, '1648881418856550446', '伙食成本', '1', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2412, '1648881418856550446', '燃油费', '1', 2500.00, 1, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2413, '1648881418856550446', '人员进出场', '1', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2414, '1648881418856550446', '观测辅助民工', '1', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2415, '1648881418856540445', '其它成本', NULL, NULL, NULL, 114000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2416, '1648881418856530444', '审查成本', '1', 32000.00, 1, 32000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2417, '1648881418856520443', '车辆成本', NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2418, '1648881418856510442', '技术中心审查费用', '1', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2419, '1648881418856500441', '投标保证金', '元', 30000.00, 1, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2420, '1648881418856490440', '保险费', NULL, NULL, 2, 2196.40, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2421, '1648881418856480439', '专家报告评审费', '元', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2422, '1648881418856470438', '住宿成本', '人天', 120.00, 101, 12120.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2423, '1648881418856470438', '用餐成本', '人天', 150.00, 101, 15150.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2424, '1648881418856470438', '车辆加油费', '项', 4730.00, 1, 4730.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2425, '1648881418856470438', '车辆维修', '项', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2426, '1648881418856460437', '天府科创贷担保费', NULL, 90000.00, 1, 90000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2427, '1648881418856450436', '奖杯制作费用', '项', 6498.00, 1, 6498.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2428, '1648881418856440435', NULL, NULL, NULL, NULL, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2429, '1648881418856430434', '用餐成本', '人.天', 75.00, 20, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2430, '1648881418856430434', '住宿成本', '人.天', 100.00, 20, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2431, '1648881418856430434', '车辆加油费', '人.天', 100.00, 5, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2432, '1648881418856430434', '机动船租赁费', '天', 500.00, 4, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2433, '1648881418856420433', '桐子林观测', '人工', 120.00, 28, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2434, '1648881418856420433', '二滩水准', '人工', 120.00, 55, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2435, '1648881418856420433', '桐子林便道清理', '人工', 150.00, 19, 2850.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2436, '1648881418856420433', '内观人员工资', '人工', 3750.00, 2, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2437, '1648881418856420433', '司机工资', '人工', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2438, '1648881418856420433', '车辆费用', '项', 3500.00, 1, 3500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2439, '1648881418856420433', '进出场交通费', '人次', 300.00, 6, 1800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2440, '1648881418856420433', '常驻人员生活开支', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2441, '1648881418856410432', '其它成本', '元', NULL, 1, 40000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2442, '1648881418856400431', '税金', '1', 140000.00, 1, 140000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2443, '1648881418856400431', '其他费用', '1', 80000.00, 1, 80000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2444, '1648881418856390430', '住宿成本', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2445, '1648881418856390430', '人员成本', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2446, '1648881418856390430', '商务成本', NULL, NULL, NULL, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2447, '1648881418856380429', '其它成本', '项', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2448, '1648881418856370428', '土建成本', '1', 7000.00, 1, 7000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2449, '1648881418856370428', '食宿成本', '1', 16000.00, 1, 16000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2450, '1648881418856370428', '燃油费', '1', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2451, '1648881418856370428', '民工费', '1', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2452, '1648881418856370428', '高原药品采购', '1', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2453, '1648881418856360427', '住宿成本', '人.天', 100.00, 40, 4000.00, 4000.00);
INSERT INTO `cmc_borrow_detail` VALUES (2454, '1648881418856360427', '用餐成本', '人.天', 120.00, 40, 4800.00, 4800.00);
INSERT INTO `cmc_borrow_detail` VALUES (2455, '1648881418856360427', '车辆加油费', '项', 2200.00, 1, 2200.00, 2200.00);
INSERT INTO `cmc_borrow_detail` VALUES (2456, '1648881418856350426', '其它成本', '项', 11000.00, 1, 11000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2457, '1648881418856340425', '保障成本', '1', 60000.00, 1, 60000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2458, '1648881418856330424', '培训费', '人', 900.00, 4, 3600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2459, '1648881418856320423', '其它成本', NULL, 30000.00, 1, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2460, '1648881418856310422', '住宿成本', '人天', 120.00, 20, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2461, '1648881418856310422', '用餐成本', '人天', 100.00, 40, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2462, '1648881418856310422', '交通成本', '次', 400.00, 3, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2463, '1648881418856310422', '接待费', '次', 500.00, 5, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2464, '1648881418856300421', '伙食成本', '1', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2465, '1648881418856300421', '燃油费', '1', 2500.00, 1, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2466, '1648881418856300421', '人员进出场', '1', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2467, '1648881418856300421', '修车费', '1', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2468, '1648881418856300421', '观测辅助民工', '1', 8000.00, 1, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2469, '1648881418856290420', '车辆成本', '天', 200.00, 10, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2470, '1648881418856290420', '用餐成本', '人/天', 100.00, 40, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2471, '1648881418856290420', '住宿成本', '人/天', 80.00, 40, 3200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2472, '1648881418856290420', 'SCCORS中心正常计算费用', '元', 300.00, 1, 300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2473, '1648881418856280419', '用餐成本', '人', 1000.00, 10, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2474, '1648881418856280419', '车辆成本', '辆', 2500.00, 2, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2475, '1648881418856280419', '耗材成本', '月', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2476, '1648881418856280419', '住宿成本', '月', 600.00, 1, 600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2477, '1648881418856280419', '用工成本', '人', 4000.00, 7, 28000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2478, '1648881418856280419', '水电气网', '月', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2479, '1648881418856270418', '其它成本', NULL, NULL, NULL, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2480, '1648881418856260417', '备用金', NULL, 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2481, '1648881418856250416', '外包劳务成本', NULL, NULL, NULL, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2482, '1648881418856250416', '人员成本', NULL, NULL, NULL, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2483, '1648881418856250416', '保障成本', NULL, NULL, NULL, 40000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2484, '1648881418856240415', '车辆成本', '元', 200.00, 8, 1600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2485, '1648881418856240415', '用餐成本', '元', 300.00, 8, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2486, '1648881418856240415', '住宿成本', '元', 500.00, 8, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2487, '1648881418856230414', '人员成本', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2488, '1648881418856230414', '用餐成本', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2489, '1648881418856230414', '住宿成本', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2490, '1648881418856230414', '车辆成本', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2491, '1648881418856220413', '其它成本', NULL, 50000.00, 1, 50000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2492, '1648881418856210412', '中标服务费', '元', 13485.00, 1, 13485.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2493, '1648881418856200411', '中标服务费', '元', 44280.00, 1, 44280.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2494, '1648881418856190410', '用餐成本', '人天', 100.00, 680, 68000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2495, '1648881418856190410', '住宿成本', '人天', 80.00, 660, 52800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2496, '1648881418856190410', '交通成本', '人次', 1600.00, 8, 12800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2497, '1648881418856190410', '车辆加油费', '天', 200.00, 70, 14000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2498, '1648881418856190410', '租车成本', '天', 900.00, 55, 49500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2499, '1648881418856190410', '商务成本', '项', 15000.00, 1, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2500, '1648881418856190410', '其他', '项', 2900.00, 1, 2900.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2501, '1648881418856180409', '其它成本', '项', 6300.00, 1, 6300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2502, '1648881418856170408', '住宿成本', '人天', 80.00, 56, 4480.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2503, '1648881418856170408', '用餐成本', '人天', 80.00, 56, 4480.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2504, '1648881418856170408', '车辆成本', '次', 900.00, 4, 3600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2505, '1648881418856170408', '其它成本', '项', 1440.00, 1, 1440.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2506, '1648881418856160407', '车辆成本', '元', 200.00, 8, 1600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2507, '1648881418856160407', '用餐成本', '元', 300.00, 8, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2508, '1648881418856160407', '住宿成本', '元', 250.00, 8, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2509, '1648881418856160407', 'SCCORS中心正常计算费用', '元', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2510, '1648881418856150406', '住宿成本', '人天', 100.00, 45, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2511, '1648881418856150406', '用餐成本', '人天', 100.00, 45, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2512, '1648881418856150406', '车辆成本', '项', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2513, '1648881418856150406', '其它成本', '项', 10000.00, 1, 10000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (2514, '1648881418856140405', NULL, NULL, 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2515, '1648881418856130404', '用餐成本', '人天', 80.00, 450, 36000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2516, '1648881418856130404', '车辆成本', '辆', 200.00, 30, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2517, '1648881418856130404', '住宿成本', '套', 2000.00, 2, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2518, '1648881418856120403', '车辆成本', '天', 150.00, 20, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2519, '1648881418856120403', '住宿成本', '人天', 80.00, 80, 6400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2520, '1648881418856120403', '用餐成本', '人天', 100.00, 80, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2521, '1648881418856110402', '学会、协会会费', '1', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2522, '1648881418856100401', '标书购买费', '元', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2523, '1648881418856090400', '项目成本', '元', NULL, 1, 4095.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2524, '1648881418856080399', '保险费', NULL, NULL, 1, 1098.20, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2525, '1648881418856070398', '施工监测投标费用', '元', 30000.00, 1, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2526, '1648881418856070398', '地下官网内窥前期费用', '元', 100000.00, 1, 100000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2527, '1648881418856070398', '现场项目开展', '元', 70000.00, 1, 70000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2528, '1648881418856060397', '用餐成本', '人', 1000.00, 13, 13000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2529, '1648881418856060397', '车辆成本', '辆', 2500.00, 2, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2530, '1648881418856060397', '耗材成本', '月', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2531, '1648881418856060397', '住宿成本', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2532, '1648881418856060397', '临时用工成本', '人', 3500.00, 2, 7000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2533, '1648881418856060397', '实习生', '人', 2500.00, 7, 17500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2534, '1648881418856060397', '水电气网', '月', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2535, '1648881418856060397', '交通费', '月', 800.00, 1, 800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2536, '1648881418856060397', '印刷费', '次', 13500.00, 1, 13500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2537, '1648881418856050396', '人员生活成本', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2538, '1648881418856050396', '燃油费', '项', 2500.00, 1, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2539, '1648881418856050396', '进出场交通费', '项', 1200.00, 1, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2540, '1648881418856050396', '观测辅助民工', '人工', 200.00, 35, 7000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2541, '1648881418856050396', '车辆保养', '项', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2542, '1648881418856040395', '保险费', NULL, NULL, NULL, 340.80, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2543, '1648881418856030394', '用工成本', '人.天', 250.00, 60, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2544, '1648881418856030394', '墩标建造材料', '个', 200.00, 10, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2545, '1648881418856030394', '租车', '天', 600.00, 10, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2546, '1648881418856030394', '保险', '人', 200.00, 5, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2547, '1648881418856030394', '用餐成本', '人.天', 100.00, 30, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2548, '1648881418856030394', '住宿成本', '人.天', 100.00, 30, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2549, '1648881418856020393', '保险费用', '1', 7695.00, 1, 7695.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2550, '1648881418856010392', NULL, NULL, NULL, 148, 164284.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2551, '1648881418856000391', '用餐成本', '人', 1000.00, 8, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2552, '1648881418856000391', '车辆成本', '辆', 2500.00, 2, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2553, '1648881418856000391', '耗材成本', '月', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2554, '1648881418856000391', '住宿成本', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2555, '1648881418856000391', '用工成本', '人', 3500.00, 8, 28000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2556, '1648881418856000391', '水电气网', '月', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2557, '1648881418856000391', '交通成本', '人', 150.00, 5, 750.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2558, '1648881418855990390', '用餐成本', '人天', 100.00, 60, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2559, '1648881418855990390', '住宿成本', '人天', 100.00, 60, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2560, '1648881418855990390', '其它成本', '项', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2561, '1648881418855990390', '交通成本', '项', 3500.00, 1, 3500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2562, '1648881418855980389', '审查成本', '次', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2563, '1648881418855970388', '用餐成本', '人.天', 100.00, 40, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2564, '1648881418855970388', '住宿成本', '间.天', 120.00, 20, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2565, '1648881418855970388', '车辆成本', '天', 400.00, 20, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2566, '1648881418855970388', '用工成本', '人天', 200.00, 60, 12000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (2567, '1648881418855970388', '界桩制作搬运', '根', 230.00, 115, 26450.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2568, '1648881418855970388', '告示牌制作搬运', '个', 980.00, 35, 34300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2569, '1648881418855960387', '商务成本', NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2570, '1648881418855950386', '车辆成本', '元', 100.00, 15, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2571, '1648881418855950386', '用餐成本', '元', 500.00, 15, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2572, '1648881418855950386', '住宿成本', '元', 500.00, 15, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2573, '1648881418855950386', '其它', '元', 3500.00, 1, 3500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2574, '1648881418855940385', '实习生结算', '次', 7670.00, 1, 7670.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2575, '1648881418855930384', '实习生结算', '次', 17215.00, 1, 17215.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2576, '1648881418855930384', '九龙住房房租', '半年', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2577, '1648881418855930384', '九龙办公房租', '半年', 3500.00, 1, 3500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2578, '1648881418855920383', '伙食成本', '1', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2579, '1648881418855920383', '燃油费', '1', 2500.00, 1, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2580, '1648881418855920383', '人员进出场', '1', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2581, '1648881418855920383', '观测辅助民工', '1', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2582, '1648881418855920383', '康定三道桥、水桥补图', '1', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2583, '1648881418855910382', '用餐成本', '人天', 100.00, 32, 3200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2584, '1648881418855910382', '住宿成本', '人天', 80.00, 32, 2560.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2585, '1648881418855910382', '车辆成本', '项', 1240.00, 1, 1240.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2586, '1648881418855900381', '桐子林外观', '人天', 120.00, 28, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2587, '1648881418855900381', '二滩外观水准', '人天', 120.00, 55, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2588, '1648881418855900381', '二滩外观平面', '人天', 120.00, 28, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2589, '1648881418855900381', '金龙山外观', '项', 24500.00, 1, 24500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2590, '1648881418855900381', '内观固定人员工资', '人', 3750.00, 2, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2591, '1648881418855900381', '地质工程师工资', '人', 9120.00, 1, 9120.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2592, '1648881418855900381', '司机工资', '人', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2593, '1648881418855900381', '车辆费用', '项', 2500.00, 1, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2594, '1648881418855900381', '日常开支', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2595, '1648881418855900381', '进出场交通费', '人', 500.00, 4, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2596, '1648881418855890380', '审查成本', '项', 1.00, 1, 2550.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2597, '1648881418855880379', '交通成本', '项目管理部', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2598, '1648881418855870378', '船只租用', '项', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2599, '1648881418855870378', '人员成本', '项', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2600, '1648881418855860377', '中标服务费', '元', 2226.00, 1, 2226.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2601, '1648881418855850376', '其它成本', '元', NULL, 1, 50000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2602, '1648881418855840375', '车辆成本', NULL, NULL, NULL, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2603, '1648881418855840375', '用餐成本', NULL, NULL, NULL, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2604, '1648881418855840375', '住宿成本', NULL, NULL, NULL, 2600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2605, '1648881418855830374', '工时费', '项', 35401.00, 1, 35401.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2606, '1648881418855820373', '外包劳务成本', NULL, NULL, 1, 24800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2607, '1648881418855810372', '外业现场费用', '元', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2608, '1648881418855800371', '卫片购买', '项', 39000.00, 1, 39000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2609, '1648881418855800371', '住宿成本', '人天', 150.00, 120, 18000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2610, '1648881418855800371', '用餐成本', '人天', 150.00, 120, 18000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2611, '1648881418855800371', '车辆成本', '项', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2612, '1648881418855800371', '其他', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2613, '1648881418855790370', '中标服务费', '1', 57035.00, 1, 57035.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2614, '1648881418855780369', '用餐成本', '人天', 120.00, 80, 9600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2615, '1648881418855780369', '住宿成本', '人天', 100.00, 80, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2616, '1648881418855780369', '车辆成本', '项', 2400.00, 1, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2617, '1648881418855770368', '水校实习生工作量结算费用', '元', 3281.00, 1, 3481.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2618, '1648881418855770368', '软件', '元', 800.00, 7, 5600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2619, '1648881418855760367', '车辆成本', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2620, '1648881418855760367', '用餐成本', '人天', 100.00, 15, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2621, '1648881418855760367', '住宿成本', '人天', 100.00, 15, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2622, '1648881418855750366', '标书购买费', '元', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2623, '1648881418855740365', '车辆成本', NULL, NULL, NULL, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2624, '1648881418855740365', '住宿成本', NULL, NULL, NULL, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2625, '1648881418855740365', '用餐成本', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2626, '1648881418855730364', '耗材成本', '个', 0.80, 55000, 44000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2627, '1648881418855730364', '耗材成本', '张', 0.11, 583000, 64130.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2628, '1648881418855730364', '其它成本', NULL, 0.03, 64130, 1923.90, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2629, '1648881418855720363', '用餐成本', '人/月', 1200.00, 13, 15600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2630, '1648881418855720363', '车辆成本', '车/月', 2200.00, 2, 4400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2631, '1648881418855720363', '耗材成本', '月', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2632, '1648881418855720363', '住宿成本', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2633, '1648881418855720363', '水电气网', '月', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2634, '1648881418855720363', '用工成本', '人/月', 4000.00, 6, 24000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2635, '1648881418855720363', '意外保险', '人次', 225.00, 6, 1350.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2636, '1648881418855720363', '临时用车', '月', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2637, '1648881418855720363', '学生车费', '人', 150.00, 6, 900.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2638, '1648881418855710362', '用餐成本', '月', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2639, '1648881418855710362', '车辆成本', '月', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2640, '1648881418855710362', '住宿成本', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2641, '1648881418855710362', '其它成本', '月', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2642, '1648881418855700361', '空域申请费用', '项', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2643, '1648881418855690360', '桐子林外观', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2644, '1648881418855690360', '二滩水准观测', NULL, NULL, NULL, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2645, '1648881418855690360', '二滩平面观测', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2646, '1648881418855690360', '内观人员工资', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2647, '1648881418855690360', '地质工程师工资', NULL, NULL, NULL, 9120.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2648, '1648881418855690360', '驾驶员工资', NULL, NULL, NULL, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2649, '1648881418855690360', '车辆费用', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2650, '1648881418855690360', '日常开支', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2651, '1648881418855690360', '金龙山季度观测', NULL, NULL, NULL, 24500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2652, '1648881418855680359', '试点已垫付成本', NULL, NULL, NULL, 467.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2653, '1648881418855680359', '人员成本', '人天', 100.00, 40, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2654, '1648881418855680359', '车辆成本', '工天', 200.00, 10, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2655, '1648881418855680359', '住宿成本', '间', 150.00, 20, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2656, '1648881418855680359', '购置供电设备', '个', 568.00, 1, 568.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2657, '1648881418855670358', '车辆成本', NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2658, '1648881418855660357', '桐子林外观', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2659, '1648881418855660357', '二滩外观水准', NULL, NULL, NULL, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2660, '1648881418855660357', '内观固定人员工资', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2661, '1648881418855660357', '车辆费用', NULL, NULL, NULL, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2662, '1648881418855660357', '常驻人员生活费', NULL, NULL, NULL, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2663, '1648881418855660357', '交通费用', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2664, '1648881418855660357', '地质工程师工资', NULL, NULL, NULL, 9120.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2665, '1648881418855660357', '驾驶员工资', NULL, NULL, NULL, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2666, '1648881418855650356', '其它成本', '1', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2667, '1648881418855640355', '标书购买费', '1', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2668, '1648881418855630354', '车辆成本', '天', 450.00, 8, 3600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2669, '1648881418855630354', '用餐成本', '人天', 100.00, 16, 1600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2670, '1648881418855630354', '住宿成本', '人天', 100.00, 16, 1600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2671, '1648881418855620353', '界桩制作费', NULL, 240.00, 372, 89280.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2672, '1648881418855620353', '界桩搬运费', NULL, 50.00, 372, 18600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2673, '1648881418855620353', '界牌制作费', NULL, 1000.00, 75, 75000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2674, '1648881418855610352', '用餐成本', '/人/月', 1500.00, 5, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2675, '1648881418855610352', '住宿成本', '/人/月', 1200.00, 5, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2676, '1648881418855610352', '车辆成本', '月', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2677, '1648881418855610352', '意外险', '人', 220.00, 5, 1100.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2678, '1648881418855610352', '进出场', '人', 400.00, 5, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2679, '1648881418855610352', '用工成本', '天', 160.00, 30, 4800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2680, '1648881418855610352', '其它成本', '月', 600.00, 1, 600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2681, '1648881418855600351', '差旅费', '次', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2682, '1648881418855590350', '项目生产成本', '1', 60000.00, 1, 60000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2683, '1648881418855580349', '用餐成本', '月', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2684, '1648881418855580349', '车辆成本', '月', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2685, '1648881418855580349', '住宿成本', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2686, '1648881418855580349', '其它成本', '月', 2500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2687, '1648881418855570348', '用餐成本', '元', 600.00, 30, 18000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (2688, '1648881418855570348', '住宿成本', '元', 800.00, 30, 24000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (2689, '1648881418855570348', '租车', '元', 900.00, 30, 27000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2690, '1648881418855570348', '返程机票', '元', 2750.00, 4, 11000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2691, '1648881418855560347', '履约保函办理担保费用', '元', 1.00, 2712, 2712.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2692, '1648881418855550346', '其它成本', '1', 1.00, 50000, 50000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2693, '1648881418855540345', '投标保证金', '1', 1.00, 50000, 50000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2694, '1648881418855530344', '商务成本', '1', 100000.00, 1, 100000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2695, '1648881418855520343', '成勘院项目投标专家评审费', '项', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2696, '1648881418855510342', '其它成本', NULL, NULL, NULL, 300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2697, '1648881418855500341', '桐子林外观', '人天', 120.00, 28, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2698, '1648881418855500341', '二滩外观水准', '人天', 120.00, 55, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2699, '1648881418855500341', '内观工人工资', '月', 3750.00, 2, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2700, '1648881418855500341', '车辆燃油费及修理费', '项', 2500.00, 1, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2701, '1648881418855500341', '进出场交通费用', '人', 268.00, 8, 2144.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2702, '1648881418855500341', '人员生活费', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2703, '1648881418855500341', '安全生产及办公费', '项', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2704, '1648881418855500341', '司机工资', '月', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2705, '1648881418855490340', '车辆成本', NULL, 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2706, '1648881418855490340', '住宿成本', NULL, 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2707, '1648881418855490340', '用餐成本', NULL, 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2708, '1648881418855480339', '水文资料收集', NULL, NULL, NULL, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2709, '1648881418855480339', '水文分析计算费用', NULL, NULL, NULL, 90000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2710, '1648881418855470338', '车辆成本', NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2711, '1648881418855460337', '其它成本', NULL, NULL, NULL, 50000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2712, '1648881418855450336', '税金', '元', 140000.00, 1, 140000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2713, '1648881418855440335', '学会、协会会费', '水利水电测绘信息网', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2714, '1648881418855430334', '用餐成本', '人天', 150.00, 120, 18000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2715, '1648881418855430334', '住宿成本', '人天', 150.00, 120, 18000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2716, '1648881418855430334', '车辆成本', '项', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2717, '1648881418855420333', '学会、协会会费', '1', 13000.00, 1, 13000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2718, '1648881418855410332', '其它成本', '元', 15000.00, 1, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2719, '1648881418855400331', '审查成本', '1', 15000.00, 1, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2720, '1648881418855390330', '车辆成本', NULL, 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2721, '1648881418855380329', '车辆成本', '元', 125.00, 8, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2722, '1648881418855380329', '用餐成本', '元', 250.00, 8, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2723, '1648881418855380329', '住宿成本', '元', 250.00, 8, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2724, '1648881418855370328', '其它成本', NULL, 50000.00, 1, 50000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2725, '1648881418855360327', '旧仓库租金', '季度', 700.00, 4, 2800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2726, '1648881418855360327', '护林村11、14组误工费', '次', 263.00, 1, 263.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2727, '1648881418855360327', '新仓库租金', '年', 13000.00, 1, 13000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2728, '1648881418855360327', '租货车及搬运', '次', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2729, '1648881418855350326', '车辆成本', '元', 100.00, 20, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2730, '1648881418855350326', '用餐成本', '元', 200.00, 20, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2731, '1648881418855350326', '住宿成本', '元', 200.00, 20, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2732, '1648881418855340325', '现场协调', '项', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2733, '1648881418855330324', '用餐成本', '人/月', 1500.00, 7, 10500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2734, '1648881418855330324', '车辆成本', '车/月', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2735, '1648881418855330324', '住宿成本', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2736, '1648881418855330324', '临时用车', '月', 8500.00, 1, 8500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2737, '1648881418855330324', '来回交通费', '人次', 125.00, 8, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2738, '1648881418855320323', '用餐成本', '人/月', 1200.00, 6, 7200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2739, '1648881418855320323', '车辆成本', '车/月', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2740, '1648881418855320323', '耗材成本', '月', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2741, '1648881418855320323', '住宿成本', '月', 700.00, 1, 700.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2742, '1648881418855320323', '用工成本', '人/月', 4000.00, 6, 24000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2743, '1648881418855320323', '水电气网', '月', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2744, '1648881418855320323', '学生返校车费', '人', 150.00, 6, 900.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2745, '1648881418855310322', '用餐成本', '元', 800.00, 30, 24000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2746, '1648881418855310322', '住宿成本', '元', 500.00, 30, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2747, '1648881418855310322', '车辆成本', '元', 150.00, 30, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2748, '1648881418855310322', '租车', '元', 700.00, 15, 10500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2749, '1648881418855310322', '机票', '元', 2000.00, 3, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2750, '1648881418855300321', '补充借款', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2751, '1648881418855290320', '学会、协会会费', '成都市不动产测绘协会', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2752, '1648881418855280319', '车辆成本', '元', 100.00, 60, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2753, '1648881418855280319', '用餐成本', '元', 200.00, 60, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2754, '1648881418855280319', '住宿成本', '元', 200.00, 60, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2755, '1648881418855270318', '项目成本', '1', 11326.00, 1, 11326.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2756, '1648881418855270318', '天星坝项目成本', '1', 12000.00, 1, 12000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (2757, '1648881418855260317', '其它成本', NULL, 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2758, '1648881418855250316', '其它成本', NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2759, '1648881418855240315', '车辆成本', '元', 700.00, 30, 21000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2760, '1648881418855240315', '用餐成本', '元', 400.00, 30, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2761, '1648881418855240315', '住宿成本', '元', 300.00, 30, 9000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2762, '1648881418855240315', '机票', '元', 2000.00, 4, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2763, '1648881418855240315', '航片资料收集费用', '元', 50000.00, 1, 50000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2764, '1648881418855230314', '车辆成本', NULL, 100.00, 20, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2765, '1648881418855230314', '用餐成本', NULL, 200.00, 20, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2766, '1648881418855230314', '住宿成本', NULL, 200.00, 30, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2767, '1648881418855230314', '用工成本', NULL, 200.00, 30, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2768, '1648881418855220313', '保险费', NULL, NULL, NULL, 1375.20, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2769, '1648881418855210312', '专家评审费', NULL, NULL, NULL, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2770, '1648881418855200311', '培训费', '元', 9000.00, 1, 9000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2771, '1648881418855190310', '培训费', '元', 9000.00, 1, 9000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2772, '1648881418855180309', '用餐成本', '元', 1200.00, 30, 36000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2773, '1648881418855180309', '住宿成本', '元', 600.00, 30, 18000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2774, '1648881418855180309', '车辆成本', '元', 200.00, 30, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2775, '1648881418855180309', '租车', '元', 500.00, 20, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2776, '1648881418855180309', '轮休人员往返机票', '元', 4000.00, 5, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2777, '1648881418855170308', '伙食成本', '1', 4500.00, 1, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2778, '1648881418855170308', '燃油费', '1', 2500.00, 1, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2779, '1648881418855170308', '人员进出场', '1', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2780, '1648881418855170308', '观测辅助民工', '1', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2781, '1648881418855160307', '中标服务费', '元', 21400.00, 1, 21400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2782, '1648881418855150306', '桐子林外观', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2783, '1648881418855150306', '二滩外观水准', NULL, NULL, NULL, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2784, '1648881418855150306', '内观固定人员工资', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2785, '1648881418855150306', '车辆费用', NULL, NULL, NULL, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2786, '1648881418855150306', '常驻人员生活费', NULL, NULL, NULL, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2787, '1648881418855150306', '地质工程师费用', NULL, NULL, NULL, 9120.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2788, '1648881418855150306', '司机费用', NULL, NULL, NULL, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2789, '1648881418855150306', '交通费用', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2790, '1648881418855150306', '购买工作服', NULL, NULL, NULL, 2500.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (2791, '1648881418855140305', '用餐成本', '人天', 80.00, 7, 560.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2792, '1648881418855140305', '住宿成本', '人天', 120.00, 7, 840.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2793, '1648881418855140305', '车辆成本', '项', 300.00, 1, 300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2794, '1648881418855130304', '住宿成本', '人天', 80.00, 90, 7200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2795, '1648881418855130304', '用餐成本', '人天', 80.00, 90, 7200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2796, '1648881418855130304', '车辆成本', '项', 5600.00, 1, 5600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2797, '1648881418855120303', '伙食成本', '1', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2798, '1648881418855120303', '燃油费', '1', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2799, '1648881418855120303', '人员进出场', '1', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2800, '1648881418855120303', '观测辅助民工', '1', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2801, '1648881418855120303', '硬梁包、康定新增测图', '1', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2802, '1648881418855120303', '张明勇修车费', '1', 1300.00, 1, 1300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2803, '1648881418855110302', '中标代理服务费', '元', 1.00, 21000, 21000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2804, '1648881418855100301', '车辆成本', NULL, 260.00, 6, 1560.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2805, '1648881418855100301', '用餐成本', NULL, 310.00, 6, 1860.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2806, '1648881418855100301', '住宿成本', NULL, 316.00, 5, 1580.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2807, '1648881418855090300', '党建借款', '元', 1.00, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2808, '1648881418855080299', '其它成本', NULL, 20000.00, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2809, '1648881418855070298', '其它成本', NULL, 240000.00, NULL, 240000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2810, '1648881418855060297', '伙食成本', '1', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2811, '1648881418855060297', '燃油费', '1', 2500.00, 1, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2812, '1648881418855060297', '人员进出场', '1', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2813, '1648881418855060297', '观测辅助民工', '1', 7500.00, 1, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2814, '1648881418855060297', '新增监测部位土建费', '1', 6000.00, 1, 7000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2815, '1648881418855050296', '用餐成本', '人天', 100.00, 120, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2816, '1648881418855050296', '住宿成本', '人天', 100.00, 120, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2817, '1648881418855050296', '车辆成本', '项', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2818, '1648881418855040295', '商务成本', '元', 50000.00, 1, 50000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2819, '1648881418855030294', '用餐成本', '人', 1200.00, 6, 7200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2820, '1648881418855030294', '车辆成本', '辆', 2500.00, 2, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2821, '1648881418855030294', '耗材成本', '月', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2822, '1648881418855030294', '用工成本', '人', 4000.00, 6, 24000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2823, '1648881418855030294', '新租仓库', '季度', 1500.00, 2, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2824, '1648881418855030294', '水电气网', '月', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2825, '1648881418855020293', '专家评审费', '元', 16000.00, 1, 16000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2826, '1648881418855010292', '住宿成本', '人.天', 80.00, 21, 1680.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2827, '1648881418855010292', '用餐成本', '人.天', 80.00, 18, 1440.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2828, '1648881418855010292', '车辆成本', '项', 1380.00, 1, 1380.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2829, '1648881418855000291', '人员成本', '人', 80.00, 108, 8640.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2830, '1648881418855000291', '用工成本', '人', 0.10, 40000, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2831, '1648881418855000291', '住宿成本', '年', 10000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2832, '1648881418855000291', '光纤费用', '月', 100.00, 7, 700.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2833, '1648881418855000291', '住宿成本', '月', 200.00, 7, 1400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2834, '1648881418855000291', '审查成本', '天', 600.00, 30, 18000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2835, '1648881418855000291', '用餐成本', '天/人', 60.00, 810, 48600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2836, '1648881418855000291', '车辆成本', '月', 7220.00, 3, 21660.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2837, '1648881418854990290', '专家评审费', '项', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2838, '1648881418854990290', '会场租用费', '项', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2839, '1648881418854990290', '商务招待费', '项', 500.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2840, '1648881418854980289', '其它成本', NULL, NULL, NULL, 5680.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2841, '1648881418854970288', '光纤费用', '元', 300.00, 6, 1800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2842, '1648881418854960287', '中标服务费', '元', 25000.00, 1, 25000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2843, '1648881418854950286', '标书购买费', '元', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2844, '1648881418854940285', '返程机票', '张', 1640.00, 4, 6560.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2845, '1648881418854940285', '住宿成本', '天', 160.00, 12, 1920.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2846, '1648881418854940285', '用餐成本', '天', 150.00, 12, 1800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2847, '1648881418854930284', '担保费', NULL, NULL, NULL, 144000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2848, '1648881418854920283', '用餐成本', '人天', 100.00, 24, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2849, '1648881418854920283', '住宿成本', '人天', 80.00, 24, 1920.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2850, '1648881418854920283', '车辆成本', '项', 1180.00, 1, 1180.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2851, '1648881418854910282', '中标服务费', '元', 61400.00, 1, 61400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2852, '1648881418854900281', '备用金', NULL, NULL, NULL, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2853, '1648881418854890280', '中标服务费', '元', 48888.00, 1, 48888.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2854, '1648881418854880279', '土建成本', '1', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2855, '1648881418854880279', '食宿成本', '1', 6000.00, 1, 6000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (2856, '1648881418854880279', '燃油及过路费', '1', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2857, '1648881418854870278', '用餐成本', '人天', 80.00, 30, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2858, '1648881418854870278', '住宿成本', '人天', 120.00, 25, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2859, '1648881418854870278', '车辆成本', '项', 600.00, 1, 600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2860, '1648881418854860277', '用餐成本', '元', 700.00, 30, 21000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2861, '1648881418854860277', '住宿成本', '元', 500.00, 30, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2862, '1648881418854860277', '车辆成本', '元', 100.00, 30, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2863, '1648881418854860277', '租车', '元', 700.00, 30, 21000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2864, '1648881418854850276', '其它成本', '1', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2865, '1648881418854840275', '租车', '天', 350.00, 10, 3500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2866, '1648881418854840275', '交通成本', '次', 500.00, 2, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2867, '1648881418854840275', '其它成本', NULL, 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2868, '1648881418854830274', '担保费', '年', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2869, '1648881418854820273', '水校实习生餐补', '人', 650.00, 4, 2600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2870, '1648881418854820273', '预计绩效', '元', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2871, '1648881418854820273', '外业租房子住宿成本', '元', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2872, '1648881418854820273', '用餐成本', '元', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2873, '1648881418854810272', NULL, NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2874, '1648881418854800271', NULL, NULL, NULL, NULL, 1350.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2875, '1648881418854790270', '学会、协会会费', '年费', 2800.00, 1, 2800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2876, '1648881418854790270', '人员成本', '差旅费', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2877, '1648881418854780269', '桐子林外观', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2878, '1648881418854780269', '二滩外观水准', NULL, NULL, NULL, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2879, '1648881418854780269', '内观固定人员工资', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2880, '1648881418854780269', '车辆燃油及修理', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2881, '1648881418854780269', '常驻人员生活费', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2882, '1648881418854780269', '日常办公', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2883, '1648881418854780269', '交通费用', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2884, '1648881418854780269', '二滩外观平面', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2885, '1648881418854780269', '金龙山外观', NULL, NULL, NULL, 24500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2886, '1648881418854780269', '地质工程师工资', NULL, NULL, NULL, 9200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2887, '1648881418854770268', '用餐成本', '元', 8000.00, 1, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2888, '1648881418854770268', '住宿成本', '元', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2889, '1648881418854770268', '用工成本', '元', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2890, '1648881418854760267', '其它成本', NULL, NULL, NULL, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2891, '1648881418854750266', '用餐成本', '元', 110.00, 35, 3850.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2892, '1648881418854750266', '住宿成本', '元', 120.00, 34, 4080.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2893, '1648881418854750266', '车辆成本', '元', 202.00, 35, 7070.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2894, '1648881418854740265', '车辆成本', '天', 400.00, 30, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2895, '1648881418854740265', '住宿成本', '人天', 100.00, 40, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2896, '1648881418854740265', '用餐成本', '人天', 80.00, 40, 3200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2897, '1648881418854740265', '界桩模具', '个', 400.00, 28, 11200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2898, '1648881418854740265', '告示牌制作', '个', 900.00, 17, 15300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2899, '1648881418854740265', '界桩预制', '个', 150.00, 331, 49650.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2900, '1648881418854740265', '界桩安装', '个', 100.00, 331, 33100.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2901, '1648881418854740265', '其他', '项', 2550.00, 1, 2550.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2902, '1648881418854730264', '住宿成本', NULL, NULL, NULL, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2903, '1648881418854730264', '用餐成本', NULL, NULL, NULL, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2904, '1648881418854730264', '商务成本', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2905, '1648881418854720263', '车辆成本', '天', 100.00, 30, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2906, '1648881418854720263', '用餐成本', '天', 100.00, 30, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2907, '1648881418854720263', '住宿成本', '天', 100.00, 30, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2908, '1648881418854710262', NULL, NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2909, '1648881418854700261', '用餐成本', '1', 6000.00, NULL, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2910, '1648881418854700261', '住宿成本', '1', 4000.00, NULL, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2911, '1648881418854700261', '土建、观测民工成本', '1', 15000.00, NULL, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2912, '1648881418854700261', '车辆燃油费', '1', 4000.00, NULL, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2913, '1648881418854700261', '土建材料采购', '1', 1000.00, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2914, '1648881418854690260', '保障成本', '元', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2915, '1648881418854680259', '桐子林外观', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2916, '1648881418854680259', '二滩水准观测', NULL, NULL, NULL, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2917, '1648881418854680259', '内观固定人员工资', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2918, '1648881418854680259', '地质工程师', NULL, NULL, NULL, 9120.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2919, '1648881418854680259', '车辆费用', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2920, '1648881418854680259', '常驻人员生活费', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2921, '1648881418854680259', '日常办公开支', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2922, '1648881418854680259', '交通费用', NULL, NULL, NULL, 2680.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2923, '1648881418854680259', '观测便道年度维护', NULL, NULL, NULL, 18000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2924, '1648881418854680259', '退向星星项目押金', NULL, NULL, NULL, 8470.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2925, '1648881418854670258', '其它成本', NULL, NULL, NULL, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2926, '1648881418854660257', '机票', '人.次', 1000.00, 4, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2927, '1648881418854660257', '现场租车', '天', 900.00, 8, 7200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2928, '1648881418854660257', '用餐成本', '人.天', 120.00, 24, 2880.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2929, '1648881418854660257', '住宿成本', '人.天', 100.00, 21, 2100.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2930, '1648881418854660257', '其他', '项', 2320.00, 1, 2320.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2931, '1648881418854650256', '伙食成本', '1', 1.00, 6000, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2932, '1648881418854650256', '燃油费', '1', 1.00, 3000, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2933, '1648881418854650256', '人员进出场', '1', 1.00, 1500, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2934, '1648881418854650256', '观测辅助民工', '1', 1.00, 5000, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2935, '1648881418854650256', '项目成本', '1', 1.00, 30000, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2936, '1648881418854640255', '车辆成本', '元', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2937, '1648881418854640255', '住宿成本', '元', 200.00, 5, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2938, '1648881418854640255', '用餐成本', '元', 200.00, 5, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2939, '1648881418854630254', '商务成本', NULL, NULL, NULL, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2940, '1648881418854620253', '学会、协会会费', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2941, '1648881418854610252', '用餐成本', '人.天', 100.00, 15, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2942, '1648881418854610252', '住宿成本', '人.天', 100.00, 12, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2943, '1648881418854610252', '车辆成本', '项', 1300.00, 1, 1300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2944, '1648881418854600251', '用餐成本', '人.天', 80.00, 25, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2945, '1648881418854600251', '住宿成本', '人.天', 80.00, 20, 1600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2946, '1648881418854600251', '车辆成本', '项', 1400.00, 1, 1400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2947, '1648881418854590250', '咨询费', '次', 11700.00, 1, 11700.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2948, '1648881418854580249', '交通成本', '元', 6500.00, 1, 6500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2949, '1648881418854580249', '用餐成本', '元', 320.00, 15, 4800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2950, '1648881418854580249', '住宿成本', '元', 480.00, 15, 7200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2951, '1648881418854580249', '租车', '元', 900.00, 15, 13500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2952, '1648881418854580249', '托运费', '元', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2953, '1648881418854580249', '其它成本', '元', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2954, '1648881418854570248', '商务成本', '1', 72250.00, 1, 72250.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2955, '1648881418854560247', '桐子林外观', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2956, '1648881418854560247', '二滩外观水准', NULL, NULL, NULL, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2957, '1648881418854560247', '内观固定人员工资', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2958, '1648881418854560247', '地质人员费用', NULL, NULL, NULL, 9120.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2959, '1648881418854560247', '聘请司机', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2960, '1648881418854560247', '常驻人员生活费', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2961, '1648881418854560247', '交通费用', NULL, NULL, NULL, 2650.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2962, '1648881418854560247', '车辆费用', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2963, '1648881418854560247', '其他开支', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2964, '1648881418854550246', '人员成本', '月/人', 1300.00, 9, 11700.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2965, '1648881418854550246', '车辆成本', '月/车', 2900.00, 2, 5800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2966, '1648881418854550246', '办公耗材', '40天', 1300.00, 1, 1300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2967, '1648881418854550246', '水电气', '40天', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2968, '1648881418854550246', '住宿成本', '月', 1300.00, 1, 1300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2969, '1648881418854550246', '现代车险车船税', '年', 1155.00, 1, 1155.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2970, '1648881418854540245', '用工成本', '元', 5785.00, 1, 5785.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2971, '1648881418854530244', '实习生津贴', '次', 28483.00, 1, 28483.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2972, '1648881418854530244', '水电气网', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2973, '1648881418854530244', '成果资料批量打印', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2974, '1648881418854520243', '车辆成本', '元', 250.00, 12, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2975, '1648881418854520243', '用餐成本', '元', 230.00, 12, 2760.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2976, '1648881418854520243', '住宿成本', '元', 240.00, 11, 2640.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2977, '1648881418854520243', '保障成本', '元', 1600.00, 1, 1600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2978, '1648881418854510242', '专家评审费', '1', 1.00, NULL, 17500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2979, '1648881418854500241', '其它成本', '元', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2980, '1648881418854490240', '18000', '1', NULL, 1, NULL, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2981, '1648881418854480239', '用餐成本', '元', 300.00, 10, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2982, '1648881418854480239', '住宿成本', '元', 300.00, 10, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2983, '1648881418854480239', '车辆成本', '元', 100.00, 10, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2984, '1648881418854480239', '过渡板改装', '元', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2985, '1648881418854480239', '购买基站静态数据', '元', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2986, '1648881418854470238', '车辆成本', '元', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2987, '1648881418854460237', '飞行批文办理', '项', 12000.00, 1, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2988, '1648881418854450236', '学费', '元', 9000.00, 1, 9000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2989, '1648881418854440235', '担保费', '1', 15000.00, 1, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2990, '1648881418854430234', '担保费', '1', 870.00, 1, 870.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2991, '1648881418854430234', '担保费', '1', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2992, '1648881418854420233', '车辆成本', '辆', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2993, '1648881418854420233', '人员成本', '人', NULL, NULL, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2994, '1648881418854420233', '用餐成本', '人', NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2995, '1648881418854410232', '保险费', '元', 21000.00, 1, 21000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2996, '1648881418854410232', '保险费', '元', 3500.00, 1, 3500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2997, '1648881418854400231', '中标服务费', '1', 65443.00, 1, 65443.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2998, '1648881418854390230', '车辆成本', '天', 1000.00, 12, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (2999, '1648881418854390230', '燃油费', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3000, '1648881418854390230', '用餐成本', '人天', 120.00, 56, 6720.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3001, '1648881418854390230', '住宿成本', '人天', 120.00, 24, 2880.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3002, '1648881418854390230', '机票', '往返', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3003, '1648881418854380229', NULL, NULL, NULL, NULL, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3004, '1648881418854370228', '保险费', '元', 21000.00, 1, 21000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3005, '1648881418854370228', '保险费', '元', 3500.00, 1, 3500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3006, '1648881418854360227', '空域审批', '项', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3007, '1648881418854360227', '用餐成本', '人天', 100.00, 50, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3008, '1648881418854360227', '住宿成本', '人天', 120.00, 30, 3600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3009, '1648881418854360227', '车辆成本', '天', 10.00, 200, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3010, '1648881418854350226', '标书购买费', '项', 300.00, 1, 300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3011, '1648881418854340225', '伙食成本', '1', 1.00, 6000, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3012, '1648881418854340225', '燃油费', '1', 1.00, 3000, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3013, '1648881418854340225', '月报、年报出版装订费', '1', 1.00, 1000, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3014, '1648881418854340225', '人员进出场车费', '1', 1.00, 1500, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3015, '1648881418854340225', '民工费', '1', 1.00, 4000, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3016, '1648881418854340225', '施工期员工工资', '1', 1.00, 2250, 2250.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3017, '1648881418854340225', '太平驿项目全年开支', '1', 1.00, 6000, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3018, '1648881418854330224', '中标服务费', '1', 22664.00, 1, 22664.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3019, '1648881418854320223', '差旅费', NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3020, '1648881418854310222', '税金', '元', 185000.00, 1, 185000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3021, '1648881418854300221', '备用金', NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3022, '1648881418854290220', '商务成本', '次', 6609.00, 1, 6609.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3023, '1648881418854290220', '商务成本', '次', 4862.00, 1, 4862.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3024, '1648881418854280219', '外包劳务成本', '项', 100000.00, 1, 100000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3025, '1648881418854270218', '用餐成本', '元', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3026, '1648881418854260217', '其它成本', NULL, NULL, NULL, 11000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3027, '1648881418854250216', '用餐成本', '人/月', 1400.00, 7, 9800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3028, '1648881418854250216', '车辆成本', '车/月', 2900.00, 2, 5800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3029, '1648881418854250216', '耗材成本', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3030, '1648881418854250216', '住宿成本', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3031, '1648881418854250216', '水电气网', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3032, '1648881418854250216', '用工成本', '工天', 150.00, 80, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3033, '1648881418854250216', '进场交通', '车', 350.00, 2, 700.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3034, '1648881418854240215', '伙食成本', '1', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3035, '1648881418854240215', '燃油费', '1', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3036, '1648881418854240215', '人员进出场', '1', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3037, '1648881418854240215', '观测辅助民工', '1', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3038, '1648881418854240215', '长河坝测图', '1', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3039, '1648881418854230214', '车辆成本', NULL, 200.00, 6, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3040, '1648881418854230214', '用餐成本', NULL, 300.00, 6, 1800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3041, '1648881418854230214', '住宿成本', NULL, 240.00, 6, 1440.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3042, '1648881418854230214', '耗材成本', NULL, 560.00, 1, 560.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3043, '1648881418854220213', '购买招标文件', '元', 1.00, 500, 500.25, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3044, '1648881418854210212', '用餐成本', '元', 200.00, 10, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3045, '1648881418854210212', '住宿成本', '元', 200.00, 10, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3046, '1648881418854210212', '车辆成本', '元', 100.00, 10, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3047, '1648881418854210212', '用工成本', '项', 25000.00, 1, 25000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3048, '1648881418854210212', '界桩搬运费', '元', 25000.00, 1, 25000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3049, '1648881418854200211', NULL, NULL, NULL, NULL, 270000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3050, '1648881418854190210', '车辆成本', '元', 150.00, 6, 900.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3051, '1648881418854190210', '用餐成本', '元', 200.00, 6, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3052, '1648881418854190210', '住宿成本', '元', 200.00, 6, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3053, '1648881418854190210', '用工成本', '元', 150.00, 8, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3054, '1648881418854180209', '项目所在地完税', '1', 6500.00, 1, 6500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3055, '1648881418854180209', '资料提交成本', '1', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3056, '1648881418854170208', '担保费', '月', 578.27, 36, 20817.54, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3057, '1648881418854160207', '咨询费', NULL, 11000.00, 1, 11000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3058, '1648881418854150206', '用工成本', '人.天', 150.00, 20, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3059, '1648881418854150206', '车辆成本', '天', 400.00, 5, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3060, '1648881418854150206', '住宿成本', '人.天', 80.00, 30, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3061, '1648881418854150206', '用餐成本', '人.天', 100.00, 30, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3062, '1648881418854140205', ' 桐子林外观', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3063, '1648881418854140205', '二滩水准外观', NULL, NULL, NULL, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3064, '1648881418854140205', '二滩平面', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3065, '1648881418854140205', '二滩控制网复测', NULL, NULL, NULL, 19440.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3066, '1648881418854140205', '内观固定人员工资', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3067, '1648881418854140205', '地质工程师', NULL, NULL, NULL, 9120.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3068, '1648881418854140205', '车辆费用', NULL, NULL, NULL, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3069, '1648881418854140205', '人员生活费', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3070, '1648881418854140205', '其他办公', NULL, NULL, NULL, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3071, '1648881418854140205', '人员交通费用', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3072, '1648881418854130204', '其它成本', NULL, NULL, NULL, 16000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3073, '1648881418854120203', '贷款担保费', NULL, NULL, NULL, 90000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3074, '1648881418854110202', '中标服务费', '元', 1.00, 21000, 21000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3075, '1648881418854100201', '用工成本', NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3076, '1648881418854090200', '外包劳务成本', '元', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3077, '1648881418854080199', NULL, NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3078, '1648881418854070198', '住宿成本', '人天', 300.00, 40, 12000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3079, '1648881418854070198', '用餐成本', '人天', 100.00, 80, 8000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3080, '1648881418854070198', '车辆成本', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3081, '1648881418854060197', '商务成本', '次', 15000.00, 1, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3082, '1648881418854050196', '住宿成本', '元', 800.00, 2, 1600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3083, '1648881418854050196', '用餐成本', '元', 650.00, 4, 2600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3084, '1648881418854040195', '伙食成本', '1', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3085, '1648881418854040195', '燃油费', '1', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3086, '1648881418854040195', '人员进出场车费', '1', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3087, '1648881418854040195', '商务宴请', '1', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3088, '1648881418854040195', '民工费', '1', 8000.00, 1, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3089, '1648881418854040195', '民工意外伤害险', '1', 1200.00, 1, 1200.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3090, '1648881418854040195', '试用期员工工资', '1', 150.00, 30, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3091, '1648881418854030194', '不动产证书工本费', '本', 2.85, 7500, 21375.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3092, '1648881418854020193', '垫支成本', '元', 8865.00, 1, 8865.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3093, '1648881418854020193', '二次进场开支', '元', 7000.00, 1, 7000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3094, '1648881418854010192', '差旅费', '1', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3095, '1648881418854000191', '中标代理服务费', '元', 1.00, 79800, 79800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3096, '1648881418853990190', '车辆成本', '/车/月', 2200.00, 2, 4400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3097, '1648881418853990190', '生活成本', '/人/月', 1000.00, 9, 9000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3098, '1648881418853990190', '办公耗材', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3099, '1648881418853990190', '住宿成本', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3100, '1648881418853990190', '公共交通', '月', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3101, '1648881418853990190', '商务成本', '次', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3102, '1648881418853990190', '实习生车费', '人次', 135.00, 27, 3645.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3103, '1648881418853990190', '实习津贴', '次', 9455.00, 1, 9455.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3104, '1648881418853980189', '用餐成本', '月/人', 60.00, 300, 18000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3105, '1648881418853980189', '车辆成本', '月', NULL, NULL, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3106, '1648881418853980189', '耗材成本', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3107, '1648881418853980189', '其它成本', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3108, '1648881418853970188', '中标服务费', '元', 60468.00, 1, 60468.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3109, '1648881418853960187', '商务成本', '1', 13000.00, 1, 13000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3110, '1648881418853950186', '标书购买费', '项', 200.00, 1, 200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3111, '1648881418853940185', '交通成本', '天', 800.00, 5, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3112, '1648881418853940185', '用餐成本', '人天', 100.00, 15, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3113, '1648881418853940185', '住宿成本', '人天', 100.00, 15, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3114, '1648881418853930184', '用餐成本', '元', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3115, '1648881418853920183', '桐子林外观', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3116, '1648881418853920183', '二滩外观水准', NULL, NULL, NULL, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3117, '1648881418853920183', '内观固定人员工资', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3118, '1648881418853920183', '车辆费用', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3119, '1648881418853920183', '常驻人员生活费', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3120, '1648881418853920183', '日常办公', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3121, '1648881418853920183', '交通费用', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3122, '1648881418853920183', '地质工程师工资', NULL, NULL, NULL, 9120.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3123, '1648881418853920183', '金龙山季度观测', NULL, NULL, NULL, 24500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3124, '1648881418853910182', '接待费', '次', 799.00, 1, 799.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3125, '1648881418853900181', '住宿成本', '项', 960.00, 1, 960.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3126, '1648881418853900181', '用餐成本', '项', 1066.00, 1, 1066.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3127, '1648881418853900181', '车辆成本', '项', 850.00, 1, 850.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3128, '1648881418853890180', '车险（现代）', '年', 2490.00, 1, 2490.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3129, '1648881418853890180', '生活成本', '月', 1000.00, 24, 24000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3130, '1648881418853890180', '办公耗材', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3131, '1648881418853890180', '交通成本', '月', 2200.00, 3, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3132, '1648881418853890180', '租车', '月', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3133, '1648881418853890180', '司机（兼临时工）', '月', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3134, '1648881418853890180', '住宿成本', '月', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3135, '1648881418853890180', '公共交通', '月', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3136, '1648881418853890180', '其他杂费', '月', 910.00, 1, 910.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3137, '1648881418853880179', NULL, NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3138, '1648881418853870178', '商务成本', '1', 110500.00, 1, 110500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3139, '1648881418853860177', '住宿成本', '人.天', 100.00, 82, 8200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3140, '1648881418853860177', '用餐成本', '人.天', 100.00, 82, 8200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3141, '1648881418853860177', '车辆成本', '天', 300.00, 18, 5400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3142, '1648881418853850176', '车辆成本', '次', 1125.00, 1, 1125.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3143, '1648881418853840175', '伙食成本', '1', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3144, '1648881418853840175', '燃油费', '1', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3145, '1648881418853840175', '国庆期工地租车', '1', 2100.00, 1, 2100.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3146, '1648881418853840175', '人员进出场车费', '1', 1200.00, 1, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3147, '1648881418853840175', '归档资料装订费用', '1', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3148, '1648881418853840175', '试用期员工工资', '1', 6750.00, 1, 6750.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3149, '1648881418853840175', '民工费', '1', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3150, '1648881418853830174', '车辆成本', '天', 200.00, 10, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3151, '1648881418853830174', '用餐成本', '人天', 80.00, 30, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3152, '1648881418853830174', '住宿成本', '间', 100.00, 18, 1800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3153, '1648881418853830174', '其他', '项', 200.00, 1, 300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3154, '1648881418853820173', '学会、协会会费', '元', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3155, '1648881418853810172', '外业住宿吃饭', NULL, 15000.00, 1, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3156, '1648881418853810172', '3080TI显卡', NULL, 6600.00, 15, 99000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3157, '1648881418853810172', '4名实习生意外保险', NULL, 90.00, 4, 360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3158, '1648881418853810172', '水校空三人员住宿', NULL, 2400.00, 1, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3159, '1648881418853800171', '中标服务费', '元', 48552.62, 1, 48552.60, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3160, '1648881418853790170', NULL, NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3161, '1648881418853780169', '泸县房地一体项目', '元', 13000.00, NULL, 13000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3162, '1648881418853770168', '车辆成本', '公里', 1.00, 6000, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3163, '1648881418853770168', '用餐成本', '人天', 100.00, 120, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3164, '1648881418853770168', '住宿成本', '天', 150.00, 60, 9000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3165, '1648881418853770168', '其它成本', NULL, 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3166, '1648881418853760167', '住宿成本', NULL, NULL, NULL, 7000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3167, '1648881418853760167', '其它成本', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3168, '1648881418853760167', '用餐成本', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3169, '1648881418853750166', '住宿成本', '人.天', 60.00, 80, 4800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3170, '1648881418853750166', '餐饮成本', '人.天', 100.00, 80, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3171, '1648881418853750166', '车辆成本', '天', 200.00, 20, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3172, '1648881418853740165', '培训费', '元', 2400.00, 1, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3173, '1648881418853730164', '中标服务费', '元', 12000.00, 1, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3174, '1648881418853720163', '其它成本', '1', 101000.00, 1, 101000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3175, '1648881418853710162', '车辆成本', '元', 200.00, 30, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3176, '1648881418853710162', '用餐成本', '元', 500.00, 30, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3177, '1648881418853710162', '住宿成本', '元', 600.00, 29, 17400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3178, '1648881418853710162', '返程机票', '元', 2200.00, 8, 17600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3179, '1648881418853710162', '租车', '元', 800.00, 30, 24000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3180, '1648881418853700161', '桐子林外观民工费', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3181, '1648881418853700161', '二滩外观民工费', NULL, NULL, NULL, 7000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3182, '1648881418853700161', '内观固定人员工资', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3183, '1648881418853700161', '地质工程师固定工资', NULL, NULL, NULL, 9200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3184, '1648881418853700161', '车辆费用', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3185, '1648881418853700161', '生活费用', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3186, '1648881418853700161', '日常办公', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3187, '1648881418853700161', '进场交通费用', NULL, NULL, NULL, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3188, '1648881418853700161', '仪器维修费用', NULL, NULL, NULL, 1500.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3189, '1648881418853690160', '伙食成本', NULL, NULL, NULL, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3190, '1648881418853690160', '车辆成本', NULL, NULL, NULL, 8500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3191, '1648881418853690160', '办公耗材成本', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3192, '1648881418853690160', '进出场交通成本', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3193, '1648881418853690160', '民工成本', NULL, NULL, NULL, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3194, '1648881418853680159', '生活费', '人天', 80.00, 28, 2240.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3195, '1648881418853680159', '住宿费', '人天', 120.00, 14, 1680.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3196, '1648881418853680159', '交通费', '天', 155.00, 7, 1085.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3197, '1648881418853680159', '商务费', '元', 995.00, 1, 995.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3198, '1648881418853670158', '商务成本', '1', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3199, '1648881418853660157', '车辆成本', '元', NULL, NULL, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3200, '1648881418853660157', '用工成本', '人', 150.00, 10, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3201, '1648881418853660157', '住宿成本', '间', 80.00, 10, 800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3202, '1648881418853660157', '用餐成本', '元', NULL, NULL, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3203, '1648881418853650156', '其它成本', '项', 250000.00, 1, 250000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3204, '1648881418853640155', '用餐成本', '元', 450.00, 11, 4950.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3205, '1648881418853640155', '住宿成本', '元', 450.00, 10, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3206, '1648881418853640155', '交通成本', '元', 550.00, 1, 550.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3207, '1648881418853630154', '水文分析计算费用', '元', 80000.00, 1, 80000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3208, '1648881418853620153', '桐子林外观', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3209, '1648881418853620153', '二滩水准测量', NULL, NULL, NULL, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3210, '1648881418853620153', '内观固定人员工资', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3211, '1648881418853620153', '地质工程师工资', NULL, NULL, NULL, 9200.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3212, '1648881418853620153', '车辆费用', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3213, '1648881418853620153', '生活开支', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3214, '1648881418853620153', '交通费用', NULL, NULL, NULL, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3215, '1648881418853620153', '办公室支出', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3216, '1648881418853610152', '用餐成本', '元', 180.00, 10, 1800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3217, '1648881418853610152', '住宿成本', '元', 200.00, 9, 1800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3218, '1648881418853610152', '车辆成本', '元', 140.00, 10, 1400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3219, '1648881418853600151', '生产经费', '1', 1.00, 30000, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3220, '1648881418853590150', '其它成本', '项', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3221, '1648881418853580149', '标书费', '1', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3222, '1648881418853570148', '学会、协会会费', NULL, NULL, NULL, 23000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3223, '1648881418853560147', '成都院基础分公司7人现场开支', '元', 37800.00, 1, 37800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3224, '1648881418853560147', '用工成本', '元', 500.00, 6, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3225, '1648881418853560147', '用餐成本', '元', 700.00, 6, 4200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3226, '1648881418853560147', '住宿成本', '元', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3227, '1648881418853550146', '桐子林外观费用', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3228, '1648881418853550146', '二滩水准测量费用', NULL, NULL, NULL, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3229, '1648881418853550146', '二滩平面观测', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3230, '1648881418853550146', '金龙山季度观测', NULL, NULL, NULL, 24500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3231, '1648881418853550146', '车辆燃油及维修', NULL, NULL, NULL, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3232, '1648881418853550146', '人员生活费用', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3233, '1648881418853550146', '人员交通费用', NULL, NULL, NULL, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3234, '1648881418853550146', '日常办公', NULL, NULL, NULL, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3235, '1648881418853550146', '内观固定人员工资', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3236, '1648881418853540145', '用工成本', '人', 8180.00, 1, 8180.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3237, '1648881418853540145', '租车带人工', '辆', 1120.00, 1, 1120.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3238, '1648881418853540145', '租门面', '年', 6500.00, 1, 6500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3239, '1648881418853540145', '租门面押金', '次', 1500.00, 1, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3240, '1648881418853540145', '用餐成本', '月', 7000.00, 2, 14000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3241, '1648881418853540145', '交通成本', '月', 6600.00, 2, 13200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3242, '1648881418853540145', '商务成本', '月', 3000.00, 2, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3243, '1648881418853540145', '耗材成本', '月', 500.00, 2, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3244, '1648881418853540145', '住宿成本', '月', 500.00, 2, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3245, '1648881418853540145', '员工开车补贴', '月', 1000.00, 2, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3246, '1648881418853540145', '水电气网', '月', 750.00, 2, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3247, '1648881418853530144', '用餐成本', '元', 260.00, 30, 7800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3248, '1648881418853530144', '住宿成本', '元', 220.00, 30, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3249, '1648881418853530144', '界桩制作费', '元', 70.00, 600, 42000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3250, '1648881418853530144', '车辆成本', '元', 150.00, 30, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3251, '1648881418853530144', '用工成本', '元', 150.00, 134, 20100.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3252, '1648881418853530144', '界桩搬运费', '元', 500.00, 4, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3253, '1648881418853530144', '保险费', '元', 2000.00, 1, 2000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3254, '1648881418853520143', '人员成本', '元', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3255, '1648881418853510142', '外包劳务成本', '组', 15.00, 2306, 34590.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3256, '1648881418853510142', '商务成本', '次', 3410.00, 1, 3410.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3257, '1648881418853500141', '招标文件购买费用', ' 元', 300.00, 1, 300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3258, '1648881418853490140', '车辆成本', '天', 300.00, 30, 9000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3259, '1648881418853490140', '用餐成本', '人.天', 100.00, 150, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3260, '1648881418853490140', '住宿成本', '人.天', 100.00, 145, 14500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3261, '1648881418853490140', '常备药品', '项', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3262, '1648881418853490140', '五金及标志', '项', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3263, '1648881418853480139', '中标服务费', '元', 71060.00, 1, 71060.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3264, '1648881418853470138', '中标服务费', '项', 48170.00, 1, 48170.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3265, '1648881418853460137', '其它成本', '1', 5020.00, 1, 5020.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3266, '1648881418853460137', '其它成本', '1', 3196.00, 1, 3196.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3267, '1648881418853460137', '商务成本', '1', 3784.00, 1, 3784.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3268, '1648881418853450136', '车辆成本', '元', 200.00, 10, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3269, '1648881418853450136', '用餐成本', '元', 280.00, 10, 2800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3270, '1648881418853450136', '住宿成本', '元', 320.00, 10, 3200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3271, '1648881418853440135', '商务成本', '项', 3800.00, 1, 3800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3272, '1648881418853430134', '其它成本', '元', 50000.00, 1, 50000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3273, '1648881418853420133', '用餐成本', '元', 300.00, 22, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3274, '1648881418853420133', '住宿成本', '元', 300.00, 22, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3275, '1648881418853420133', '车辆成本', '元', 250.00, 22, 5500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3276, '1648881418853420133', '保障成本', '项', 1300.00, 1, 1300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3277, '1648881418853410132', '车辆成本', '天', 500.00, 10, 5000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3278, '1648881418853410132', '用餐成本', '人天', 100.00, 15, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3279, '1648881418853410132', '住宿成本', '间', 120.00, 10, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3280, '1648881418853410132', '墩标选埋', '个', 1000.00, 10, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3281, '1648881418853410132', '强制对中盘', '个', 400.00, 10, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3282, '1648881418853410132', '五金配件', '项', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3283, '1648881418853400131', '车辆成本', '天', 200.00, 25, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3284, '1648881418853400131', '住宿成本', '间', 120.00, 50, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3285, '1648881418853400131', '用餐成本', '人天', 100.00, 75, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3286, '1648881418853390130', 'sczsck02', '1', 8000.00, 1, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3287, '1648881418853390130', 'sczsck03', '1', 8000.00, 1, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3288, '1648881418853380129', '桐子林外观', NULL, NULL, NULL, 3360.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3289, '1648881418853380129', '二滩外观水准', NULL, NULL, NULL, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3290, '1648881418853380129', '桐子林基准网年度复测', NULL, NULL, NULL, 9240.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3291, '1648881418853380129', '车辆燃油费及维修', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3292, '1648881418853380129', '人员生活费用', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3293, '1648881418853380129', '交通费用', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3294, '1648881418853380129', '内观固定人员工资', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3295, '1648881418853380129', '地质工程师工资', NULL, NULL, NULL, 9120.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3296, '1648881418853380129', '日常办公', NULL, NULL, NULL, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3297, '1648881418853370128', '商务成本', NULL, 15000.00, 1, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3298, '1648881418853360127', '差旅费', NULL, 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3299, '1648881418853350126', '机票', '人次', 1500.00, 4, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3300, '1648881418853350126', '车辆成本', '天', 1000.00, 10, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3301, '1648881418853350126', '用餐成本', '人天', 150.00, 30, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3302, '1648881418853350126', '住宿成本', '人天', 150.00, 30, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3303, '1648881418853350126', '其他', '项', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3304, '1648881418853340125', '租房费用', '季度', 1000.00, 3, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3305, '1648881418853340125', '仓库租金', '半年', 1400.00, 1, 1400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3306, '1648881418853330124', '车辆成本', '元', 160.00, 10, 1600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3307, '1648881418853330124', '用餐成本', '元', 200.00, 10, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3308, '1648881418853330124', '住宿成本', '元', 220.00, 10, 2200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3309, '1648881418853330124', '用工成本', '元', 150.00, 100, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3310, '1648881418853330124', '界桩制作费', '元', 70.00, 60, 4200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3311, '1648881418853320123', '车辆成本', '项', 1460.00, 1, 1460.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3312, '1648881418853320123', '用餐成本', '人天', 100.00, 21, 2100.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3313, '1648881418853320123', '住宿成本', '间', 120.00, 12, 1440.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3314, '1648881418853310122', '中国华电集团电子商务平台服务费（2021年度）', '元', 1.00, 4800, 4800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3315, '1648881418853300121', NULL, NULL, NULL, NULL, 166402.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3316, '1648881418853290120', '其它成本', NULL, NULL, NULL, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3317, '1648881418853280119', '1075', '次', 1075.00, 1, 1075.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3318, '1648881418853270118', '用餐成本', '元', 450.00, 10, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3319, '1648881418853270118', '住宿成本', '元', 450.00, 10, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3320, '1648881418853270118', '交通成本', '元', 100.00, 10, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3321, '1648881418853260117', '住宿成本', '天', 300.00, 14, 4200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3322, '1648881418853260117', '用餐成本', '天', 350.00, 14, 4900.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3323, '1648881418853260117', '交通成本', '天', 200.00, 14, 2800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3324, '1648881418853260117', '耗材成本', NULL, 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3325, '1648881418853260117', '商务成本', '次', 1100.00, 1, 1100.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3326, '1648881418853250116', '设备费用', '块', 1000.00, 7, 7000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3327, '1648881418853250116', '设备费用', '台', 2800.00, 1, 2800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3328, '1648881418853240115', '外业开支成本', '项', 1284.00, 1, 1284.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3329, '1648881418853230114', '商务成本', '次', 2434.00, 1, 2434.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3330, '1648881418853230114', '商务成本', '次', 1202.00, 1, 1202.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3331, '1648881418853230114', '商务成本', '次', 3541.00, 1, 3541.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3332, '1648881418853230114', '商务成本', '次', 4524.00, 1, 4524.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3333, '1648881418853220113', '外包劳务成本', '元', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3334, '1648881418853210112', '车辆成本', '维修', 980.00, 1, 980.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3335, '1648881418853210112', '耗材成本', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3336, '1648881418853210112', '用餐成本', '人/月', 1000.00, 23, 23000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3337, '1648881418853210112', '交通成本', '月', 2200.00, 3, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3338, '1648881418853210112', '租车', '月', 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3339, '1648881418853210112', '保险费', '次', 3150.00, 1, 3150.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3340, '1648881418853210112', '水电气网', '月', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3341, '1648881418853210112', '家具厨具', '次', 4900.00, 1, 4900.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3342, '1648881418853210112', '床上用品', '人', 300.00, 18, 5400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3343, '1648881418853210112', '学生车费', '人', 120.00, 14, 1680.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3344, '1648881418853210112', '住宿', '月', 590.00, 1, 590.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3345, '1648881418853200111', '资料费用', '幅', 1500.00, 5, 7500.00, 7500.00);
INSERT INTO `cmc_borrow_detail` VALUES (3346, '1648881418853190110', '资料费用', '幅', 1500.00, 7, 10500.00, 10500.00);
INSERT INTO `cmc_borrow_detail` VALUES (3347, '1648881418853180109', '学会、协会会费', '项目管理部', 2800.00, 1, 2800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3348, '1648881418853170108', NULL, NULL, NULL, NULL, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3349, '1648881418853160107', 'SCCORS技术服务费', '1', 8000.00, 1, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3350, '1648881418853150106', '交通成本', '元', 2000.00, 2, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3351, '1648881418853150106', '住宿成本', '元', 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3352, '1648881418853140105', '中标服务费', '1', 22400.00, 2, 44800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3353, '1648881418853130104', '其它成本', '1', 9560.00, 1, 9560.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3354, '1648881418853120103', '中标服务费', '1', 1.00, 47860, 47860.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3355, '1648881418853110102', '成果检查费', '项', 5000.00, 1, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3356, '1648881418853100101', '往返机票、托运', '1', 12000.00, 1, 12000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3357, '1648881418853100101', '交通费', '1', 600.00, 15, 9000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3358, '1648881418853100101', '住宿费', '1', 150.00, 30, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3359, '1648881418853100101', '餐饮费', '1', 100.00, 60, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3360, '1648881418853090100', '中标服务费', '元', 15000.00, 1, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3361, '1648881418853080099', '投标保函服务费', NULL, NULL, NULL, 1980.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3362, '1648881418853070098', '用餐成本', '人.天', 60.00, 45, 2700.00, 2700.00);
INSERT INTO `cmc_borrow_detail` VALUES (3363, '1648881418853070098', '住宿成本', '人.天', 80.00, 45, 3600.00, 3600.00);
INSERT INTO `cmc_borrow_detail` VALUES (3364, '1648881418853070098', '车辆加油费', '项', 1200.00, 1, 1200.00, 1200.00);
INSERT INTO `cmc_borrow_detail` VALUES (3365, '1648881418853060097', '中标代理', '元', 1.00, 24500, 24500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3366, '1648881418853050096', '车辆成本', '1', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3367, '1648881418853050096', '用餐成本', '人天', 100.00, 30, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3368, '1648881418853050096', '住宿成本', '间', 100.00, 20, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3369, '1648881418853040095', '3080显卡', '个', 6500.00, 15, 97500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3370, '1648881418853030094', '住院代垫付医药费等', '元', 1.00, 70000, 70000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3371, '1648881418853020093', '车辆成本', '项', 8000.00, 1, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3372, '1648881418853020093', '用餐成本', '人.天', 100.00, 140, 14000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3373, '1648881418853020093', '住宿成本', '人.天', 100.00, 140, 14000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3374, '1648881418853020093', '现场租车', '天', 600.00, 5, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3375, '1648881418853020093', '出场机票', '人', 1500.00, 6, 9000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3376, '1648881418853010092', NULL, NULL, NULL, NULL, 50000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3377, '1648881418853000091', '用餐成本', '项', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3378, '1648881418853000091', '住宿成本', '项', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3379, '1648881418853000091', '其他', '项', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3380, '1648881418852990090', '住宿成本', NULL, NULL, NULL, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3381, '1648881418852990090', '用餐成本', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3382, '1648881418852990090', '其它成本', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3383, '1648881418852980089', '车辆成本', '天', 300.00, 50, 15000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3384, '1648881418852980089', '用餐成本', '人.天', 100.00, 160, 16000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3385, '1648881418852980089', '住宿成本', '人.天', 100.00, 160, 16000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3386, '1648881418852980089', '现场租车', '天', 600.00, 40, 24000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3387, '1648881418852980089', '进场机票', '人.天', 6000.00, 1, 6000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3388, '1648881418852980089', '标志购买', '项', 1000.00, 1, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3389, '1648881418852980089', '车辆维修', '项', 3500.00, 1, 3500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3390, '1648881418852970088', '审查成本', '1', 15000.00, 1, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3391, '1648881418852960087', '华能集团电子商务平台数字证书更新费用', '元', 200.00, 1, 200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3392, '1648881418852950086', '用餐成本', '人', 1233.00, 8, 9864.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3393, '1648881418852950086', '车辆成本', '月', 5353.00, 1, 5353.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3394, '1648881418852950086', '交通成本', '月', 8000.00, 1, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3395, '1648881418852950086', '耗材成本', '月', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3396, '1648881418852950086', '其它成本', '个', 773.00, 1, 773.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3397, '1648881418852950086', '商务成本', '次', 5510.00, 1, 5510.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3398, '1648881418852940085', '光纤费用', '月', 300.00, 6, 1800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3399, '1648881418852930084', NULL, NULL, NULL, NULL, 80000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3400, '1648881418852920083', '空域办理', NULL, NULL, NULL, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3401, '1648881418852920083', '项目进出场', NULL, NULL, NULL, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3402, '1648881418852920083', '人员成本', NULL, NULL, NULL, 40000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3403, '1648881418852910082', '车辆成本', NULL, NULL, NULL, 700.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3404, '1648881418852910082', '专家评审费', NULL, NULL, NULL, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3405, '1648881418852910082', '用餐成本', NULL, NULL, NULL, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3406, '1648881418852910082', '住宿成本', NULL, NULL, NULL, 1800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3407, '1648881418852900081', '燃油费及保险费', NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3408, '1648881418852890080', '其它成本', '1', 120000.00, 1, 120000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3409, '1648881418852880079', '用餐成本', NULL, NULL, NULL, 14000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3410, '1648881418852880079', '租车', NULL, NULL, NULL, 17700.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3411, '1648881418852880079', '耗材成本', NULL, NULL, NULL, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3412, '1648881418852880079', '人员成本', NULL, NULL, NULL, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3413, '1648881418852880079', '审查成本', NULL, NULL, NULL, 32000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3414, '1648881418852880079', '其它成本', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3415, '1648881418852880079', '商务成本', NULL, NULL, NULL, 50000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3416, '1648881418852870078', '已发生费用', '项', 2225.00, 1, 2225.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3417, '1648881418852870078', '界桩模具', '个', 1000.00, 4, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3418, '1648881418852870078', '界牌', '个', 65.00, 13, 845.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3419, '1648881418852870078', '界桩制作及安装', '个', 260.00, 35, 9100.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3420, '1648881418852870078', '告示牌制作安装', '个', 900.00, 7, 6300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3421, '1648881418852870078', '住宿', '天', 120.00, 10, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3422, '1648881418852870078', '生活费', '人天', 80.00, 20, 1600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3423, '1648881418852870078', '油费', '项', 1730.00, 1, 1730.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3424, '1648881418852860077', '水文分析计算费用', NULL, NULL, NULL, 40000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3425, '1648881418852850076', '进出场交通费', '人次', 270.00, 3, 810.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3426, '1648881418852850076', '租车', '天', 350.00, 4, 1400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3427, '1648881418852850076', '住宿费', '天', 120.00, 4, 480.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3428, '1648881418852850076', '生活费', '天', 120.00, 4, 480.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3429, '1648881418852850076', '模具', '套', 400.00, 2, 800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3430, '1648881418852850076', '界桩制作埋设', '个', 50.00, 140, 7000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3431, '1648881418852840075', '标书购买费', '1', 500.00, 1, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3432, '1648881418852830074', '中标服务费', '1', 67840.00, 1, 67840.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3433, '1648881418852820073', '其它成本', NULL, NULL, NULL, 18000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3434, '1648881418852810072', '中标代理服务费', '元', 1.00, 9000, 9000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3435, '1648881418852800071', '车辆成本', '元', NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3436, '1648881418852800071', '住宿成本', '元', NULL, NULL, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3437, '1648881418852800071', '用餐成本', '元', NULL, NULL, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3438, '1648881418852800071', '租船', '元', NULL, NULL, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3439, '1648881418852790070', '批文办理', '项', 35000.00, 1, 35000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3440, '1648881418852790070', '外业开支', '项', 5000.00, 1, 5000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3441, '1648881418852780069', '车辆成本', '元', 150.00, 35, 5250.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3442, '1648881418852780069', '住宿成本', '元', 300.00, 35, 10500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3443, '1648881418852780069', '用餐成本', '元', 240.00, 35, 8400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3444, '1648881418852780069', '耗材成本', '元', NULL, NULL, 3000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3445, '1648881418852770068', '外包劳务成本', '项', 30000.00, 1, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3446, '1648881418852760067', '其它成本', NULL, NULL, NULL, 30000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3447, '1648881418852750066', '其它成本', NULL, 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3448, '1648881418852740065', '机票', '元', NULL, NULL, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3449, '1648881418852740065', '返程机票', '元', NULL, NULL, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3450, '1648881418852740065', '租车', '元', NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3451, '1648881418852740065', '住宿成本', '元', NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3452, '1648881418852740065', '用餐成本', '元', NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3453, '1648881418852730064', '住宿成本', '间', 300.00, 10, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3454, '1648881418852730064', '用餐成本', '天', 300.00, 10, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3455, '1648881418852730064', '油料费', '天', 200.00, 10, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3456, '1648881418852730064', '其他', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3457, '1648881418852720063', '桐子林外观民工费用', NULL, NULL, NULL, 3400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3458, '1648881418852720063', '二滩垂直位移观测费用', NULL, NULL, NULL, 6600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3459, '1648881418852720063', '内观固定人员工资', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3460, '1648881418852720063', '车辆费用', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3461, '1648881418852720063', '日常办公', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3462, '1648881418852720063', '交通费用', NULL, NULL, NULL, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3463, '1648881418852720063', '人员生活开支', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3464, '1648881418852710062', '用餐成本', NULL, NULL, NULL, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3465, '1648881418852710062', '车辆成本', NULL, NULL, NULL, 9000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3466, '1648881418852710062', '办公耗材成本', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3467, '1648881418852710062', '进出场交通成本', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3468, '1648881418852710062', '民工成本', NULL, NULL, NULL, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3469, '1648881418852700061', '界桩埋设', '元', 200.00, 100, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3470, '1648881418852700061', '水位牌', '元', 10000.00, 4, 40000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3471, '1648881418852690060', NULL, NULL, 3250.00, NULL, 2750.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3472, '1648881418852680059', '车辆成本', '元', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3473, '1648881418852680059', '用餐成本', '元', 8000.00, 1, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3474, '1648881418852680059', '住宿成本', '元', 8000.00, 1, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3475, '1648881418852670058', '用工成本', NULL, 3500.00, 6, 21000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3476, '1648881418852670058', '租车', NULL, 2500.00, 1, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3477, '1648881418852670058', '交通成本', NULL, 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3478, '1648881418852670058', '商务成本', NULL, 2000.00, 1, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3479, '1648881418852670058', '外包劳务成本', NULL, 6000.00, 1, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3480, '1648881418852670058', '用餐成本', NULL, 1000.00, 6, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3481, '1648881418852670058', '其它成本', NULL, 300.00, 6, 1800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3482, '1648881418852670058', '其它成本', NULL, 1200.00, 1, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3483, '1648881418852660057', '差旅费', NULL, 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3484, '1648881418852650056', '其它成本', NULL, NULL, NULL, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3485, '1648881418852640055', '培训费', '元/人', 2500.00, 5, 12500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3486, '1648881418852630054', '进出场交通费', '1', 200.00, 1, 200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3487, '1648881418852630054', '现场租车', '天', 350.00, 20, 7000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3488, '1648881418852630054', '住宿费', '天', 120.00, 20, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3489, '1648881418852630054', '生活费', '天', 120.00, 20, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3490, '1648881418852630054', '界桩制作、运输、安装', '个', 700.00, 50, 35000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3491, '1648881418852630054', '界牌制作、运输、安装', '个', 1700.00, 4, 6800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3492, '1648881418852630054', '青苗补偿', '项', 3000.00, 1, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3493, '1648881418852620053', '税金', '元', 84000.00, 1, 84000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3494, '1648881418852610052', '车辆成本', NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3495, '1648881418852600051', '车辆成本', NULL, NULL, NULL, 1200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3496, '1648881418852600051', '住宿成本', NULL, NULL, NULL, 3600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3497, '1648881418852600051', '用餐成本', NULL, NULL, NULL, 3600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3498, '1648881418852600051', '千寻账号费用', NULL, NULL, NULL, 300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3499, '1648881418852600051', '已发生成本垫付', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3500, '1648881418852590050', '租车', '元/天', 800.00, 15, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3501, '1648881418852590050', '车辆成本', '元', 120.00, 20, 2400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3502, '1648881418852590050', '住宿成本', '元/天', 900.00, 16, 14400.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3503, '1648881418852590050', '用餐成本', '元/天', 700.00, 16, 11200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3504, '1648881418852590050', '机票', '元', 2500.00, 8, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3505, '1648881418852580049', '界桩制作', '个', 80.00, 500, 40000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3506, '1648881418852580049', '界桩埋设', '个', 50.00, 200, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3507, '1648881418852570048', '住宿', '25', 200.00, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3508, '1648881418852570048', '餐食', '25', 350.00, NULL, 8750.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3509, '1648881418852570048', '交通', '25', 200.00, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3510, '1648881418852570048', '千寻账号', '1', 1250.00, NULL, 1250.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3511, '1648881418852570048', '人员进场', '1', 2500.00, NULL, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3512, '1648881418852560047', '用工成本', NULL, NULL, NULL, 40000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3513, '1648881418852560047', '其它成本', NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3514, '1648881418852550046', '商务成本', '项', 50000.00, 1, 50000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3515, '1648881418852540045', '新增人员进场费用', NULL, NULL, NULL, 3500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3516, '1648881418852540045', '住宿', NULL, NULL, NULL, 6500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3517, '1648881418852540045', '餐饮', NULL, NULL, NULL, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3518, '1648881418852540045', '交通', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3519, '1648881418852530044', '项目开支', NULL, NULL, NULL, 127000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3520, '1648881418852520043', '车辆成本', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3521, '1648881418852520043', '住宿成本', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3522, '1648881418852520043', '用餐成本', NULL, NULL, NULL, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3523, '1648881418852520043', '其它成本', NULL, NULL, NULL, 1500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3524, '1648881418852510042', '车辆成本', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3525, '1648881418852510042', '耗材成本', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3526, '1648881418852510042', '用餐成本', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3527, '1648881418852510042', '住宿成本', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3528, '1648881418852500041', '进出场交通费', NULL, NULL, NULL, 6000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3529, '1648881418852500041', '食宿', NULL, NULL, NULL, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3530, '1648881418852500041', '现场交通费用', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3531, '1648881418852490040', '用餐成本', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3532, '1648881418852490040', '车辆成本', NULL, NULL, NULL, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3533, '1648881418852490040', '民工费', NULL, NULL, NULL, 40000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3534, '1648881418852490040', '其它成本', NULL, NULL, NULL, 2500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3535, '1648881418852480039', '代理服务费', NULL, NULL, NULL, 21925.40, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3536, '1648881418852470038', '住宿', NULL, NULL, NULL, 2160.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3537, '1648881418852470038', '餐饮', NULL, NULL, NULL, 3150.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3538, '1648881418852470038', '交通', NULL, NULL, NULL, 690.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3539, '1648881418852460037', '用餐成本', NULL, NULL, NULL, 35000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3540, '1648881418852460037', '住宿成本', NULL, NULL, NULL, 35000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3541, '1648881418852460037', '车辆成本', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3542, '1648881418852460037', '用工成本', NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3543, '1648881418852460037', '耗材成本', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3544, '1648881418852450036', '水文资料收集', NULL, NULL, NULL, 80000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3545, '1648881418852440035', '生产成本', NULL, NULL, NULL, 60000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3546, '1648881418852420033', '食宿', NULL, NULL, NULL, 22500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3547, '1648881418852420033', '界桩制作运输', NULL, NULL, NULL, 20000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3548, '1648881418852420033', '民工', NULL, NULL, NULL, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3549, '1648881418852420033', '青苗费', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3550, '1648881418852410032', '用餐成本', NULL, NULL, NULL, 21000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3551, '1648881418852410032', '住宿成本', NULL, NULL, NULL, 21000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3552, '1648881418852410032', '用工成本', NULL, NULL, NULL, 12000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3553, '1648881418852410032', '保障成本', NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3554, '1648881418852410032', '交通成本', NULL, NULL, NULL, 52800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3555, '1648881418852400031', '餐饮费', NULL, NULL, NULL, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3556, '1648881418852400031', '住宿费', NULL, NULL, NULL, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3557, '1648881418852400031', '交通费', NULL, NULL, NULL, 500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3558, '1648881418852390030', '车辆成本', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3559, '1648881418852390030', '用餐成本', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3560, '1648881418852390030', '耗材成本', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3561, '1648881418852390030', '住宿成本', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3562, '1648881418852380029', '空域申请', '1', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3563, '1648881418852370028', '食宿', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3564, '1648881418852370028', '交通', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3565, '1648881418852360027', NULL, NULL, NULL, NULL, 40000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3566, '1648881418852350026', '人员成本', NULL, NULL, NULL, 867.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3567, '1648881418852340025', '交通成本', NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3568, '1648881418852340025', '用餐成本', NULL, NULL, NULL, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3569, '1648881418852340025', '住宿成本', NULL, NULL, NULL, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3570, '1648881418852340025', '其它成本', NULL, NULL, NULL, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3571, '1648881418852330024', '其它成本', NULL, NULL, NULL, 100.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3572, '1648881418852320023', '委外单位成本', NULL, NULL, NULL, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3573, '1648881418852310022', '外包劳务成本', NULL, NULL, NULL, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3574, '1648881418852310022', '用餐成本', NULL, NULL, NULL, 8000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3575, '1648881418852310022', '车辆成本', NULL, NULL, NULL, 7000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3576, '1648881418852300021', '车辆成本', NULL, NULL, NULL, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3577, '1648881418852290020', '住宿', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3578, '1648881418852290020', '餐饮', NULL, NULL, NULL, 7500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3579, '1648881418852290020', '交通', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3580, '1648881418852290020', '千寻账号', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3581, '1648881418852280019', '食宿', NULL, NULL, NULL, 2000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3582, '1648881418852280019', '交通', NULL, NULL, NULL, 1000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3583, '1648881418852270018', '交通费', NULL, NULL, NULL, 1800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3584, '1648881418852270018', '住宿费', NULL, NULL, NULL, 3600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3585, '1648881418852270018', '餐饮费', NULL, NULL, NULL, 3600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3586, '1648881418852270018', '其他', NULL, NULL, NULL, 9000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3587, '1648881418852260017', '西巴霞曲遥感影像、DEM数据采购', NULL, NULL, NULL, 90000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3588, '1648881418852250016', '车辆成本', NULL, NULL, NULL, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3589, '1648881418852250016', '二滩用工成本', NULL, NULL, NULL, 9780.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3590, '1648881418852250016', '桐子林用工成本', NULL, NULL, NULL, 3640.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3591, '1648881418852250016', '内观用工成本', NULL, NULL, NULL, 7800.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3592, '1648881418852250016', '金龙山用工成本', NULL, NULL, NULL, 24500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3593, '1648881418852240015', '中标服务费', '1', 29690.00, 1, 29690.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3594, '1648881418852230014', '中标服务费', '1', 49043.00, 1, 49043.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3595, '1648881418852220013', '用工成本', '4个', 600.00, 20, 12000.00, 0.00);
INSERT INTO `cmc_borrow_detail` VALUES (3596, '1648881418852210012', '人员成本', NULL, NULL, 4, 2750.40, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3597, '1648881418852200011', '担保费', '年', 1.00, 1, 29118.69, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3598, '1648881418852190010', '值班车辆燃油费', '20000', 1.00, 20000, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3599, '1648881418852180009', '担保费', '年', 1.00, 144000, 144000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3600, '1648881418852170008', '其它成本', NULL, NULL, NULL, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3601, '1648881418852160007', '其它成本', '元', 50000.00, 1, 50000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3602, '1648881418852150006', '车辆成本', '元', 160.00, 16, 2560.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3603, '1648881418852150006', '用餐成本', '元', 200.00, 16, 3200.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3604, '1648881418852150006', '住宿成本', '元', 220.00, 15, 3300.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3605, '1648881418852150006', '交通成本', '元', 940.00, 1, 940.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3606, '1648881418852140005', '住宿成本', '天', 400.00, 50, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3607, '1648881418852140005', '用餐成本', '天', 100.00, 50, 5000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3608, '1648881418852140005', '车辆成本', '天', 1000.00, 7, 7000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3609, '1648881418852140005', '翻译', '天', 500.00, 20, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3610, '1648881418852140005', '机票', '张', 7000.00, 2, 14000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3611, '1648881418852140005', '安全环保措施费', '项', 20000.00, 1, 20000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3612, '1648881418852140005', '其他', '项', 4000.00, 1, 4000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3613, '1648881418852130004', '住宿成本', '天', 300.00, 15, 4500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3614, '1648881418852130004', '用餐成本', '天', 350.00, 15, 5250.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3615, '1648881418852130004', '交通成本', '天', 200.00, 15, 3000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3616, '1648881418852130004', '其它成本', '天', 40.00, 15, 600.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3617, '1648881418852130004', '番禺项目成本', '项', 1250.00, 1, 1250.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3618, '1648881418852120003', '外包劳务成本', '元', 39900.00, 1, 39900.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3619, '1648881418852120003', '用工成本', '元', 20500.00, 1, 20500.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3620, '1648881418852110002', '商务成本', NULL, 60000.00, 1, 60000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3621, '1648881418852100001', '住宿成本', '元', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3622, '1648881418852100001', '用工成本', '元', 15000.00, 1, 15000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3623, '1648881418852100001', '用餐成本', '元', 10000.00, 1, 10000.00, NULL);
INSERT INTO `cmc_borrow_detail` VALUES (3624, '1648881418852100001', '车辆成本', '元', 5000.00, 1, 5000.00, NULL);

-- ----------------------------
-- 52、cmc分包合同评审表
-- ----------------------------
drop table if exists `cmc_sub_contract`;
create table `cmc_sub_contract`  (
  `sub_contract_id` 		char(19)  		not null 	 comment '分包合同id',
  `sub_contract_name` 		varchar(100)  	default null comment '分包合同名称',
  `sub_amount` 				decimal(10, 2) 	default null comment '分包合同金额',
  `partner_id` 				varchar(50)		default null comment '承接单位id',
  `contact_person` 			varchar(20)  	default null comment '承接单位联系人',
  `telephone` 				varchar(50)  	default null comment '承接单位联系电话',
  `drafter` 				bigint			default null comment '拟稿人',
  `draft_time` 				date			default null comment '拟稿日期',
  `contract_document` 		varchar(255)  	default null comment '合同文件',
  `remark` 					text			default null comment '合同备注',
  `sign_date` 				date			default null comment '签订日期',
  `sign_remark` 			varchar(255)  	default null comment '签订备注',
  `sign_scan` 				varchar(255)  	default null comment '签订扫描件',
  `comment_type` 			char(1)  		default null comment '评审方式',
  `manager_comment` 		varchar(255)  	default null comment '分管审批意见',
  `manager_user_id` 		bigint 			default null comment '分管审批人',
  `manager_time` 			date			default null comment '分管审批日期',
  `gm_comment` 				varchar(255)  	default null comment '总经理审批意见',
  `gm_user_id` 				bigint 			default null comment '总经理审批人',
  `gm_time` 				date			default null comment '总经理审批日期',
  primary key (`sub_contract_id`)
) engine = innodb comment = 'cmc分包合同评审表';

-- ----------------------------
-- 初始化-分包合同评审表数据
-- ----------------------------
INSERT INTO `cmc_sub_contract` VALUES ('1648881410100336109', '泸县房地一体倾斜摄影测量-三维建模技术服务合同', 121376.00, '0075', '任玖', NULL, 22, '2020-08-21', NULL, '1、取费项目及工程总价款：\n序号	工程内容	           单位（照片）工程量（按实际工作量结算）	单价（元每张）	总价（元）\n1	建模	            张	                    420559	                   0.12	              50467\n2	空三+建模           张	                    354548	                   0.2	              70909\n3	工程总价款：（大写）壹拾贰万壹仟叁佰柒拾陆元整（小写）￥：121376元\n最终工作量按实际完成照片张数结算。以上费用包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费等所有费用。', '2020-08-28', NULL, NULL, '2', NULL, 7, '2020-08-24', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410100421168', '德阳市罗江区房地一体地籍界址点测绘工程技术服务合同', 350000.00, '0099', '冯鹏', NULL, 22, '2020-04-13', NULL, '经双方友好协商，本合同单价为35元/户，暂定10000户价款为: &yen;350000元，（大写:人民币叁拾伍万元整）；最终结算金额以实际完成的工作量乘以上述单价为准。\n以上费用包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费等所有费用。', '2020-04-20', NULL, NULL, '2', '同意', 7, '2020-04-16', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410102492280', '南涧至云县高速公路1：2000航测内业测图项目测绘合同', 24800.00, '0176', '刘朝海', '15812116818', 22, '2021-03-10', NULL, '本合同为单价合同，合同单价为 4000元/平方公里，合同费用共计￥24800元（大写：人民币贰万肆仟捌佰元整）。', '2021-03-16', NULL, NULL, '2', NULL, 7, '2021-03-16', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410106321070', '样品检测技术服务合同', 0.00, '0110', NULL, NULL, 148, '2023-02-01', NULL, '本合同为框架合同，无法暂估合同金额。合同单价见合同附表，按实际工作量结算。', '2023-02-03', NULL, NULL, '2', '已核', 7, '2023-02-03', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410110048403', '蒲江县城区19.37平方千米1：500数字线划图、数字正射影像图生产和更新项目技术劳务合同', 702300.00, '0120', '周晓琴', NULL, 22, '2020-09-12', NULL, '本合同采用总价承包计价模式，合同总金额（含税，）为：人民币_702300.00_元（大写：柒拾万贰仟叁佰元整）。本合同执行期间合同金额不变，甲方无须另向乙方支付本合同规定之外的其他任何费用。', '2020-09-16', NULL, NULL, '2', NULL, 7, '2020-09-15', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410116627073', '泸县“房地一体”宅基地使用权、集体建用地使用权及房屋所有权不动产登记项目技术服务协议', 90000.00, '0082', NULL, NULL, 148, '2023-11-30', NULL, '经双方协商一致，本协议为单价合同，含税单价为3元/条，数据量约为3万条，协议最终价根据数据处理条数据实结算。', '2023-11-30', NULL, NULL, '2', '已核', 7, '2023-11-30', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410117060341', '卫星数据技术服务', 6000.00, '0004', NULL, NULL, 148, '2023-11-29', NULL, '合同总金额（6,000），不含税金额（5,660.38），增值税税额（339.62）。该合同适用的增值税税率为6%。', '2023-11-30', NULL, NULL, '2', '已核', 7, '2023-11-30', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410117439060', '蓬安县林权类不动产登记数据整合项目劳务合作协议', 3487064.00, '0123', NULL, NULL, 148, '2023-01-16', NULL, '本协议费用采用总价承接方式。本协议暂扣履约风险保证金为 191000.00 元。', '2023-01-17', NULL, NULL, '2', '已阅', 7, '2023-01-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410118506471', 'MAPGIS第三次全国国土调查数据库建库系统及管理系统更新维护服务协议', 16000.00, '0037', '胥执刚', '15828697142', 22, '2021-03-11', NULL, '运行维护服务有效期为2021年 3 月起至2022年  3 月底止，服务费用为 ￥1.6 万元/年/县。涉及区县为泸州市泸县。', '2021-03-16', NULL, NULL, '2', NULL, 7, '2021-03-15', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410121814386', '遂宁高新区排水管网检测、清淤项目现场踏勘项目劳务合作协议', 91200.00, '0049', NULL, NULL, 148, '2024-01-15', NULL, '本协议含税总价为人民币91200元（大写人民币：人民币玖万壹仟贰佰元整），适用增值税税率6%。', '2024-01-16', NULL, NULL, '2', '已核', 7, '2024-01-16', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410126465972', '依安县土地调查和专项调查数据分析项目数据库建设与合库技术协作协议', 660000.00, '0160', NULL, NULL, 148, '2023-10-24', NULL, '本协议含税总价为人民币660000.00元（大写人民币：陆拾陆万元整）。', '2023-10-24', NULL, NULL, '2', '已核', 7, '2023-10-24', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410126692248', '测绘成果质量检验补充协议', 56000.00, '0022', NULL, NULL, 148, '2022-04-08', NULL, NULL, '2022-04-08', NULL, NULL, '2', NULL, 7, '2022-04-08', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410128600526', '三台县柳溪河等8条河流河道管理范围划定服务项目劳务协议', 1630520.00, '0158', NULL, NULL, 148, '2020-11-02', NULL, '本协议金额（含税，税率6%）暂定为1630520.00元（大写：人民币壹佰陆拾叁万零伍佰贰拾元整）。如遇调整，最终按业主拨付金额重新协商后确定结算金额。', '2020-11-06', NULL, NULL, '2', NULL, 7, '2020-11-03', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410133257541', '罗江县房地一体1:500地形图制图技术服务合同', 320000.00, '0143', NULL, NULL, 22, '2020-04-03', NULL, NULL, '2020-04-10', NULL, NULL, '2', NULL, 7, '2020-04-03', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410134822798', '卫星数据服务合同补充协议', 67280.00, '0039', NULL, NULL, 148, '2021-11-15', NULL, '本合同总金额为人民币陆万柒仟贰佰捌拾元整  （￥67280.00）。截至2021年12月31日未完成数据采集，按实际交付数据面积结算合同额。', '2021-11-19', NULL, NULL, '2', NULL, 7, '2021-11-16', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410139843186', '阳山县粮食生产功能区调整补划项目技术服务协议', 48610.00, '0089', NULL, NULL, 148, '2021-09-20', NULL, '合同金额为（大写）：肆万捌仟陆佰壹拾元整（48610.00元）', '2021-09-20', NULL, NULL, '2', NULL, 7, '2021-09-20', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410143268568', '芦山抽水蓄能电站航飞数据采集技术服务协议', 46500.00, '0054', NULL, NULL, 148, '2023-03-27', NULL, '本协议费用采用总价承接方式。', '2023-03-27', NULL, NULL, '2', '已核', 7, '2023-03-27', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410145953966', '西藏拉萨工程治理体系建设5个子项目治理效果监测项目劳务协议', 987553.00, '0112', NULL, NULL, 148, '2021-10-11', NULL, '经甲乙双方友好协商，本协议为含税总价人民币为： 987553.00元（大写：玖拾捌万柒仟伍佰伍拾叁元整），其中增值税率为6%，履约风险保证金10.00万元（大写：壹拾万元整）。', '2021-10-01', NULL, NULL, '2', NULL, 7, '2021-10-13', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410148279002', '溪洛渡水电站金阳、雷波库区沿江县乡复建公路病害治理地形图、铜街子消防站地形图、川藏铁路地形图、牙根二', 127000.00, '0014', NULL, NULL, 148, '2021-09-23', NULL, '本协议采用总价承包计价模式。协议含税总金额为127000.00元（大写：壹拾贰万柒仟元整），本协议的价格在协议有效期内不予调整。发生协议规定以外的工作时费用另计。以上已包含完成协议所有工作的作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费。乙方应当按甲方工期要求提交成果，甲方应自接到数据成果之日起30日内完成检查。', '2021-09-27', NULL, NULL, '2', NULL, 7, '2021-09-27', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410148312649', '脚木足河巴拉水电站主要施工区域1:500原始地形数据采集技术服务合同', 18000.00, '0008', NULL, NULL, 22, '2021-03-19', NULL, NULL, '2021-03-23', NULL, NULL, '2', NULL, 7, '2021-03-23', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410148680504', '四川省绵阳市三台县河湖保护中心三台县柳溪河等8条河流河道管理范围划定服务项目测绘合同', 37500.00, '0192', NULL, NULL, 22, '2020-11-02', NULL, '合同总价为37500.00元（人民币大写：叁万柒仟伍佰元整）。\n支付方式：\n（1）合同签订后10个工作日内，甲方一次性向乙方支付合同总金额。 \n（2）乙方在十日内完成数据试入库工作。\n（3）甲方提供合格后的最终成果供检查入库。', '2020-11-27', NULL, NULL, '2', NULL, 7, '2020-11-05', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410153194108', '大邑抽水蓄能电站航飞数据采集技术服务协议', 60000.00, '0054', NULL, NULL, 148, '2023-03-27', NULL, '本协议费用采用总价承接方式。', '2023-03-27', NULL, NULL, '2', '已核', 7, '2023-03-27', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410155899825', '都江堰市地下管线普查成果更新项目包2（监理）技术咨询合同', 81675.00, '0023', NULL, NULL, 148, '2022-06-06', NULL, '本合同为固定总价合同，合同含税总价为人民币81675.00元（大写：捌万壹仟陆佰柒拾伍元整）', '2022-06-07', NULL, NULL, '2', NULL, 7, '2022-06-07', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410161267776', '南江县农房融合入库技术服务合同', 250000.00, '0187', NULL, NULL, 22, '2020-06-10', NULL, '1、数量计算标准：数量预计  5  万户，最终以实际完成的数量计算；\n2、单价：按照5元/户标准定价；\n3、总价：实际完成数量（N）×5元/户。\n4、支付方式：合同签订后，七个工作日内甲方向乙方支付人民币50000元（大写：伍万元整）的项目启动资金，乙方按期完成本合同约定的所有农房的房产平面图转换、质检、数据叠加整合、数据融合入库、数据汇交等全部服务内容，经不动产登记中心验收合格后，甲乙双方根据实际完成的数量算得总价，甲方一次性支付扣除项目启动资金后的剩余费用（含税费用）。\n5、甲方在向乙方支付项目款前，乙方需向甲方提供税点为3%或6%的增值税专用发票。', '2020-06-16', NULL, NULL, '2', NULL, 7, '2020-06-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410166996729', '粤西（湛江、茂名、阳江、云浮）航飞影像获取及制作技术劳务合同', 1717543.11, '0043', NULL, NULL, 22, '2020-09-03', NULL, '方向乙方支付的技术劳务报酬总额为：人民币壹佰柒拾壹万柒仟伍佰肆拾叁元壹角壹分（大写），￥1717543.11（小写），其中包含增值税额（税率1%）：人民币壹万柒仟零伍元叁角捌分（大写），￥17005.38（小写）。该金额已包括乙方完成技术劳务工作所需的全部费用和报酬。', '2020-09-05', NULL, NULL, '2', NULL, 7, '2020-09-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410169112425', '阳山不动产权证书采购合同', 22500.00, '0042', NULL, NULL, 22, '2020-11-20', NULL, '《不动产权证书》单价为：2.25元/本，印制数量：《不动产权证书》10000本，本合同总价：22500元（大写：贰万贰仟伍佰元整）。', '2020-10-29', NULL, NULL, '2', NULL, 7, '2020-11-23', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410169504990', '广东省云浮市云安区都杨镇牛栏坑绿色建材项目机载激光数据采集技术服务协议', 40000.00, '0054', NULL, NULL, 148, '2022-10-18', NULL, '本协议费用采用总价承接方式。', '2022-12-12', NULL, NULL, '2', '已核', 7, '2022-12-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410169542211', '绵竹抽水蓄能电站预可阶段测绘项目技术劳务协议', 54283.36, '0077', NULL, NULL, 148, '2021-09-01', NULL, '预计价格为54283.36。该项目为单价协议，工作量以实际工作量据实结算。', '2021-09-03', NULL, NULL, '2', NULL, 7, '2021-09-03', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410172116400', '贵阳市自然资源统一确权登记项目劳务协议', 183300.00, '0072', NULL, NULL, 148, '2021-12-24', NULL, '本协议采用单价承接方式，预算含税价人民币为：183300.00元整（大写：壹拾捌万叁仟叁佰元整），其中增值税率为1%。协议金额按照预划单元首次登记通告的长度和面积进行核算，其中水流登记单元（单价） 3000.00元/千米。实际工作经费总金额按照预划单元首次登记通告的长度和面积进行核算。', '2021-12-24', NULL, NULL, '2', NULL, 7, '2020-12-24', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410174494976', '普格县集体土地所有权登记成果更新汇交项目技术服务协议', 1289746.00, '0058', NULL, NULL, 148, '2023-08-03', NULL, '本协议含税总价为人民币1289746.00.00元（大写人民币：壹佰贰拾捌万玖仟柒佰肆拾陆元整），适用增值税税率1%。', '2023-08-04', NULL, NULL, '2', '已核', 7, '2023-08-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410176517340', '眉山东部新城起步区1:500地形图制图技术服务合同', 475500.00, '0088', NULL, NULL, 22, '2021-03-01', NULL, '1、本项目预计工程总价款：（大写）肆拾柒万伍仟伍佰元整（小写）： ￥：475500元。\n2、以上费用包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费。', '2021-04-06', NULL, NULL, '2', NULL, 7, '2021-04-05', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410177957935', '林权档案电子化及存量数据整合建库采购项目技术服务协议', 1238638.00, '0173', NULL, NULL, 148, '2021-11-08', NULL, '本项目采用总价承包方式，中标总金额为1238638.00元（大写:人民币壹佰贰拾叁万捌仟陆佰叁拾捌元整）。', '2021-11-10', NULL, NULL, '2', '已核', 7, '2022-01-10', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410179264712', '南江抽水蓄能电站航飞数据采集技术服务协议', 43200.00, '0056', NULL, NULL, 148, '2023-03-09', NULL, '本协议费用采用总价承接方式。', '2023-03-09', NULL, NULL, '2', '同意', 11, '2023-03-09', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410184259321', '仁怀市北部新城-南部新城片区航飞影像及1：500地形图测绘空三加密、影像图及数据编辑技术服务协议', 145684.00, '0139', NULL, NULL, 148, '2022-11-08', NULL, '本协议费用采用总价承接方式。', '2022-11-09', NULL, NULL, '2', NULL, 7, '2022-11-09', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410189873990', '苍溪县基础测绘“十四五”规划编制项目劳务服务协议', 137900.00, '0094', NULL, NULL, 148, '2020-10-08', NULL, '经甲乙双方协商，本项目劳务协助费用（含税，税率为6%）为壹拾叁万柒仟玖佰元整（小写：137900.00元）。', '2020-10-11', NULL, NULL, '2', NULL, 7, '2021-10-11', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410197795234', '老木孔航电枢纽工程航道整治项目1:2000水下地形图测绘技术服务协议', 0.60, '0133', NULL, NULL, 148, '2022-05-10', NULL, '经甲乙双方友好协商，本协议为含税总价人民币为： 6000.00元（大写：陆仟元整），其中增值税率为6%。本项目技术协作费用，包括完成本项目所涉及人员劳务、差旅、设备投入、交通费、利润、保险、风险、税金等的一切费用。本协议执行期间协议价不变，甲方无须另向乙方支付本协议规定之外的其他任何费用。', '2022-05-11', NULL, NULL, '2', '同意', 7, '2022-05-11', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410197826888', '万达地理信息系统 V5.0（江北嘴消火栓设备管网项目+保税港消火栓设备管网项目+大竹林码头测绘项目+一品公路', 603556.00, '0190', '王羽', NULL, 22, '2020-12-07', NULL, '序号	应用项目	                               用户数	                      单价（元/套）	数量（套）	金额（元）\n1	江北嘴消火栓设备管网项目	网络版4用户	100786.00	1	100786.00\n2	保税港消火栓设备管网项目	网络版10用户	399432.00	1	399432.00\n3	大竹林码头测绘项目	                 网络版3用户	73040.00  	1	73040.00\n4	一品公路测绘项目	                单机版	               30298.00	               1	30298.00\n合计（人民币）	陆拾万叁仟伍佰伍拾陆元整	￥603556.00', '2020-12-15', NULL, NULL, '2', NULL, 7, '2020-12-09', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410199531443', '自贡与德阳激光点云处理及DEM产品制作技术服务合同', 46050.00, '0044', NULL, NULL, 22, '2020-12-01', NULL, '经双方友好协商，本合同单价为1500元/平方公里，面积30.7平方公里，工程总价款为: &yen; 46050元，（大写:人民币肆万陆仟零伍拾元整）。\n以上费用包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费等所有费用。', '2020-12-04', NULL, NULL, '2', NULL, 7, '2020-12-02', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410205514574', '简阳放生坝片区砂石储量勘察工程勘察钻探劳务合同', 99958.00, '0097', NULL, NULL, 148, '2022-12-05', NULL, '勘察野外钻探总工作量最终以实际完成工作量结算', '2023-02-10', NULL, NULL, '2', '已核', 7, '2022-12-06', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410208034937', '海南全岛地形变化较大区域、漏洞区域机载LIDAR数据获取项目技术服务协议', 594000.00, '0069', NULL, NULL, 148, '2022-12-01', NULL, '本协议费用采用总价承接方式', '2022-12-02', NULL, NULL, '2', '已核', 7, '2022-12-02', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410209174821', '遥感影像成果服务合同', 80000.00, '0061', NULL, NULL, 148, '2024-03-07', NULL, NULL, '2024-03-07', NULL, NULL, '2', '已核', 7, '2024-03-07', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410209668823', '资源2022C58测绘项目技术服务协议', 12000.00, '0011', NULL, NULL, 148, '2023-08-16', NULL, '本协议含税总价为人民币￥12000.00元（大写人民币：壹万贰仟元整），适用增值税税率1%。', '2023-08-16', NULL, NULL, '2', '已核', 7, '2023-08-16', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410209681916', '甘洛县农村“房地一体”宅基地和集体建设用地确权登记项目（二标段）合作协议书', 4206390.00, '0148', NULL, NULL, 22, '2020-05-06', NULL, '服务费用：每户单价为：238.81元，预计合同总金额约为：420.639万元（大写：肆佰贰拾万零陆仟叁佰玖拾元整）。\n一户多宅的情况按多户算，最终测绘数量以甘洛县自然资源局核定的户数为准。本合同执行期间合同单价不变，甲方无须另向乙方支付本合同规定之外的其他任何费用。\n工期：\n1、2020年5月底前完成一个镇的试点工作（包括农村宅基地、集体建设用地及房屋的外业调查测绘、资料收集整理、数据质检和入库工作）；\n2、2020年12月底前形成满足完成农村“房地一体”的宅基地和集体建设用地不动产权籍调查成果，按照数据库标准，建立地籍数据库；\n3、2021年5 月底前全面完成“房地一体”的宅基地使用权和集体建设用地首次登记发证工作，做好数据关联整合以及数据质检工作，向市、省、部汇交成果，通过项目验收。', '2020-05-11', NULL, NULL, '2', NULL, 7, '2020-05-08', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410209831394', '西藏林芝道路1:1000地形图测绘技术服务协议', 150000.00, '0181', NULL, NULL, 148, '2022-04-22', NULL, '本协议含税价格为人民币150000.00元（大写：壹拾伍万元整），适用增值税税率为6%。本协议包括乙方提供本协议范围内所有技术服务所需的全部费用（包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）', '2022-04-24', NULL, NULL, '2', NULL, 7, '2022-04-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410211745360', '四川省绵阳市三台县河湖保护中心三台县柳溪河等8条河流河道管理范围划定服务项目测绘合同', 37500.00, '0192', '王智红', NULL, 22, '2020-11-10', NULL, '本合同总价为37500.00元（人民币大写：叁万柒仟伍佰元整）。\n各河流费用为：\n富丰河：5000.00（人民币大写：伍仟元整）；\n柳溪河：5000.00（人民币大写：伍仟元整）；\n绿豆河右支河：5000.00（人民币大写：伍仟元整）；\n牛头河：5000.00（人民币大写：伍仟元整）；\n水磨河：5000.00（人民币大写：伍仟元整）；\n苏家河左支河：5000.00（人民币大写：伍仟元整）；\n小东河：5000.00（人民币大写：伍仟元整）；\n潼射河：2500.00（人民币大写：贰仟伍佰元整）；', '2020-11-27', NULL, NULL, '2', NULL, 7, '2020-11-11', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410213925078', '黄河四川段综合治理可行性研究项目测绘工作', 1058519.18, '0151', NULL, NULL, 22, '2020-10-15', NULL, '第四条本合同采用单价计价模式，合同预估总金额（含税）为1058519.18元。（大写：壹佰零伍万捌仟伍佰壹拾玖元壹角捌分）“合同工程量清单价格表”中没有规定的收费项目，除本合同另有说明，均视为乙方已将该费用摊入工程量清单单价中，甲方不再另行支付任何费用。', '2020-10-20', NULL, NULL, '2', NULL, 7, '2020-10-16', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410215184886', '苍溪抽水蓄能电站规划阶段工程地质勘察工程勘察钻探劳务合同', 75600.00, '0060', NULL, NULL, 148, '2023-12-20', NULL, '本合同采用单价计价模式。本合同合计金额为75600.00元。每次支付前乙方应开具勘察类的增值税专用发票，税率不低于3%。', '2023-12-22', NULL, NULL, '2', '已核', 7, '2024-01-05', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410218519080', '苍溪县25条河流河湖管理范围划界服务（第二包）项目劳务合同', 1249347.00, '0083', '蒲春国', NULL, 22, '2020-06-03', NULL, '经双方友好协商，本合同总价为: &yen; 1249347.00元，（大写:人民币壹佰贰拾肆万玖仟叁佰肆拾柒元整）；最终结算金额以实际完成为准。', '2020-06-10', NULL, NULL, '2', NULL, 7, '2020-06-05', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410225111298', '巴福大健康组团路网一标段第三方监测项目劳务协作协议', 400000.00, '0188', NULL, NULL, 148, '2023-08-25', NULL, '本合同为预估总价合同，合同预估总价为人民币：40.0万元（大写：肆拾万元整），最终费用由甲、乙双方友好商定。', '2023-08-29', NULL, NULL, '2', '已核', 7, '2023-08-29', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410228918635', '孟底沟对外交通辅助道路水毁修复项目技术服务合同', 150000.00, '0057', NULL, NULL, 22, '2020-11-20', NULL, '合同价格：经甲、乙双方协商本工程采用总价承包方式。合同金额（含税，税率为6%）为：150000.00元（大写：壹拾伍万元整）。以上费用包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用，工作量增减均不调整合同金额。', '2020-12-02', NULL, NULL, '2', NULL, 7, '2020-11-23', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410232948969', '甘孜藏族自治州水旱灾害风险普查（山丘区中小河流洪水淹没图编制）劳务合作协议', 2084355.00, '0150', NULL, NULL, 148, '2022-10-08', NULL, '本协议费用采用总价承接方式。', '2022-10-09', NULL, NULL, '2', '同意，支付时需要对方开具6%的增值税，如不足，需补齐税款，以后签订合同时在合同条款中加以明确', 7, '2022-10-09', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410237375744', 'MDG2023C28、ML2023C29倾斜影像数据采集及设备租借技术服务协议', 450000.00, '0054', NULL, NULL, 148, '2023-09-11', NULL, '经甲乙双方协商一致，本协议采用总价承包模式，协议总金额为450000.00元（大写：肆拾伍万元整）。', '2023-09-13', NULL, NULL, '2', '已核', 7, '2023-09-13', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410239022100', '重庆轨道四号线西延伸段控制网复测技术服务协议', 100000.00, '0092', NULL, NULL, 148, '2022-10-18', NULL, '本协议费用采用总价承接方式。', '2022-10-20', NULL, NULL, '2', '已核', 7, '2022-10-20', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410246455365', '攀枝花2023C74、汉源永利坪2023C54、甘孜2023C49、牙根2023C50航飞数据采集技术服务协议', 155000.00, '0054', NULL, NULL, 148, '2023-12-07', NULL, '经甲乙双方协商一致，本协议采用总价承包模式，协议总金额为155000.00元（大写：拾伍万伍仟元整）。', '2023-12-11', NULL, NULL, '2', '已核', 7, '2023-12-11', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410248643754', '紫霞水电站界桩测设技术服务协议', 710000.00, '0124', NULL, NULL, 148, '2022-03-22', NULL, '本协议含税价格为人民币 710000.00元（大写：柒拾壹万元整），适用增值税税率 6 %，其中界桩测设费用暂定为690000.00元（大写：陆拾玖万元整），溃坝分析地形图及断面测量费用固定为20000.00元（大写：贰万元整）。本协议界桩测设费用根据界桩数量的增减而发生变化，包括乙方提供本协议范围内所有技术服务所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。', '2022-03-24', NULL, NULL, '2', '合同中，首付款金额大写改成：人民币壹拾万元整', 7, '2022-03-24', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410248954429', '自贡市自流井区水务局自流井区河流管理与保护范围划定方案采购项目测绘合同', 30000.00, '0192', NULL, NULL, 22, '2020-06-15', NULL, NULL, '2020-06-29', NULL, NULL, '2', NULL, 7, '2020-06-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410253167594', '哈密抽水蓄能电站高精度激光点云处理及2D产品制作技术服务合同', 100800.00, '0044', NULL, NULL, 22, '2020-10-21', NULL, '经双方友好协商，本合同单价为2400元/平方公里，面积42平方公里，工程总价款为: &yen;100800元，（大写:人民币壹拾万零捌佰元整）。\n以上费用包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费等所有费用。', '2020-10-22', NULL, NULL, '2', NULL, 7, '2020-10-23', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410258095578', '自贡市卧龙东区委1：500地形图技术劳务合同', 30000.00, '0143', '杜凤', NULL, 22, '2021-03-09', NULL, '经甲乙双方协商一致，本合同采用单价计价模式，合同单价（含税，税率3%）为5830.00元，预估合同总价款为30000.00元，本合同单价在合同有效期内不予调整。', '2021-03-11', NULL, NULL, '2', NULL, 7, '2021-03-10', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410260401305', '芦山抽水蓄能电站预可阶段测绘项目', 297600.00, '0077', NULL, NULL, 148, '2022-04-08', NULL, '本协议费用采用总价承接方式。', '2022-04-08', NULL, NULL, '2', NULL, 7, '2022-04-08', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410260425304', '盐源县测量标志普查维护项目劳务合作协议', 329200.00, '0105', NULL, NULL, 148, '2023-06-02', NULL, '本协议含税总价为人民币329200.00元（大写人民币：叁拾贰万玖仟贰佰元整），适用增值税税率1%。本协议费用采用总价承接方式。', '2023-06-02', NULL, NULL, '2', '同意', 7, '2023-07-10', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410264948644', '成都兴城投资集团有限公司2020年度建设项目工程测绘劳务协议（二）', 10000.00, '0116', '贾春华', NULL, 22, '2020-08-03', NULL, '本项目各测绘工作计费方式：按Σ测绘产品实际工程量×对应测绘产品单价计取，该单价在合同实施期间固定不变，不作调整。各项测绘工作由甲方按照委托内容审核并确认实际工作量后，按本合同第四条约定的支付方式计取工程测绘费用。\n备注：分包金额10000元为预估费用。实际结算按上述公式计算后得出单项任务的费用。', '2020-08-06', NULL, NULL, '2', NULL, 7, '2020-08-06', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410276012343', '芦山县龙门、宝胜、大川（场镇、皂角湾段）等乡镇防洪堤恢复提升工程测绘技术服务协议', 54100.00, '0020', NULL, NULL, 148, '2022-03-17', NULL, '本协议含税价格为人民币 54100.00元（大写：伍万肆仟壹佰元整），适用增值税税率 6 %。本协议为固定不变价格，包括乙方提供本协议范围内所有技术服务所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。', '2022-03-18', NULL, NULL, '2', NULL, 7, '2022-03-18', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410278513346', ' 盐源县卫星遥感数据技术服务', 129000.00, '0005', NULL, NULL, 148, '2023-05-30', NULL, NULL, '2023-05-31', NULL, NULL, '2', '已核', 7, '2023-05-31', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410286685056', '龚嘴水电站、铜街子水电站1:1000补充测绘和老鹰岩水电站礼约河1:2000地形图测绘技术服务协议', 8560.00, '0125', NULL, NULL, 22, '2021-06-02', NULL, '本合同预估总价为8560元，最终工作量按实际完成面积结算。以上费用包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用。', '2021-06-09', NULL, NULL, '2', NULL, 7, '2021-06-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410289671552', '盐源2023C51航飞影像数据采集技术服务协议', 582000.00, '0054', NULL, NULL, 148, '2023-08-10', NULL, '经甲乙双方协商一致，本协议采用总价承包模式，协议总金额为582000.00元（大写：伍拾捌万贰千元整），使用税率1%。', '2023-08-11', NULL, NULL, '2', '已核', 7, '2023-08-11', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410300456767', '青川县河湖管理范围划定（一包）项目劳务协议', 724140.00, '0083', '蒲春国', NULL, 22, '2021-01-22', NULL, NULL, '2021-02-01', NULL, NULL, '2', NULL, 7, '2021-01-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410302375466', '青羊区石人公园地下停车场项目基坑工程监测技术服务协议', 148300.00, '0014', NULL, NULL, 148, '2021-03-25', NULL, '本协议采用总价承包计价模式。协议含税总金额（含税，税率6%）人民币为148300.00元（大写：壹拾肆万捌仟叁佰元整），本协议的价格在协议有效期内不予调整。发生协议规定以外的工作时费用另计。以上已包含完成协议所有工作的作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费。', '2021-04-02', NULL, NULL, '2', NULL, 7, '2021-03-26', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410303527576', '自贡市自流井区河流管理与保护范围划定项目和德阳市罗江区慧觉镇倾斜摄影房屋采集项目劳务协议', 40370.00, '0162', '洪华军', '15102713149', 22, '2021-08-03', NULL, '1、本项目单价为：每平方公里壹仟叁佰捌拾元整（￥1380.00元）、慧觉镇倾斜摄影房屋采集每户10元；该单价为综合单价，已包含作业费、规费、利润、税金（税率6%）、管理费、安全生产投入及文明施工措施费等所有费用。在协议书有效期内不予调整。\n2、本项目预估总金额为肆万零叁佰柒拾元整（￥40370.00元），结算金额根据实际完成情况进行结算。', '2021-08-09', NULL, NULL, '2', NULL, 7, '2021-08-06', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410305038254', '新华水力发电有限公司博州10万千瓦储热型光热配建90万千瓦新能源项目勘测定界、土地预审与选址意见书办理l', 800000.00, '0007', NULL, NULL, 148, '2022-08-10', NULL, '甲方付款满足“以收定支原则”，在收到业主相应款项后再对承包人支付。', '2022-08-10', NULL, NULL, '2', '已核', 7, '2022-08-10', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410309194483', '甘孜州2020年河长制水生态保护河湖（19条州级河流及125个常年湖面面积1km²以下湖泊）管理范围划定项目技术劳务合同', 6586896.00, '0128', '邹媛媛', NULL, 22, '2021-04-14', NULL, '合同含税（税率6%）总价为人民币大写：陆佰伍拾捌万陆仟捌佰玖拾陆元整，即RMB￥6586896.00元；该合同总价除未包含3.00万元的入库检查费外已包括完成本合同内容所需的一切相关费用。本合同履行期间合同总价不变，甲方无须另向乙方支付本合同规定之外的其他任何费用。当入库检查费超过3.00万元，甲方扣减超出部分的费用。', '2021-04-29', NULL, NULL, '2', NULL, 7, '2021-04-28', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410309947719', '仪陇县林权数据整合建库采购项目质量分析与保障技术服务', 150000.00, '0194', NULL, NULL, 148, '2023-11-27', NULL, NULL, '2023-11-28', NULL, NULL, '2', '已核', 7, '2023-11-28', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410315009689', '重庆市璧山区直升飞机航测航空测绘服务合同', 220000.00, '0065', NULL, NULL, 22, '2020-10-09', NULL, '经甲、乙双方协商，本合同采用总价承包模式。合同总金额（含税）为人民币贰拾贰万元整（￥220000.00），其中，作业飞行费用：人民币壹拾捌万元整（￥180000.00）、运输及场站费用及空域费用：人民币肆万元整（￥40000.00）。以上费用为乙方完成合同规定的全部工作内容的一切费用（包括但不限于专用技术使用费、技术转让或技术支持费、包装费、劳务费、安全生产费、保险费、食宿费、交通费、差旅费、管理费、税费、运杂费、利润、不可预见费）。', '2020-10-15', NULL, NULL, '2', NULL, 7, '2020-10-13', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410318685427', '天府新区万安街道高饭店街李家大院迁建保护项目勘察钻探劳务合同', 10000.00, '0060', NULL, NULL, 148, '2023-10-13', NULL, '采用综合包干价模式，包干价1万元。乙方应开具勘察类的增值税专用发票，税率不低于3%。主合同已经全额收款，收款3万元。', '2023-10-18', NULL, NULL, '2', '已核', 7, '2023-10-13', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410319850254', '龚嘴水电站水库拦污栅段1：500地形图及横断面测绘项目技术服务协议', 10928.00, '0077', '黄梅琳', NULL, 148, '2022-04-08', NULL, '本协议费用采用总价承接方式。', '2022-04-08', NULL, NULL, '2', NULL, 7, '2022-04-08', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410320071921', '罗江县房地一体1:500地形图制图技术服务合同', 140000.00, '0066', '宁清', NULL, 22, '2020-04-13', NULL, NULL, '2020-04-20', NULL, NULL, '2', '同意', 7, '2020-04-16', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410321579529', 'ML 1：2000数字线划图（DLG）项目技术服务协议', 14520.00, '0149', NULL, NULL, 148, '2022-02-14', NULL, '本协议费用采用单价承接方式，以实际生产面积为准。因为成果质量问题，单价调整为1200元。预计总价14520.00元，其中增值税率为6%。', '2022-02-15', NULL, NULL, '2', NULL, 7, '2022-02-15', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410323314298', '莎车县村庄规划地形图测绘采购项目（第一包）劳务合作协议', 100000.00, '0161', NULL, NULL, 148, '2023-12-20', NULL, '本协议含税总价为人民币100000.00元（大写人民币：壹拾万元整），适用增值税税率6%。', '2023-12-22', NULL, NULL, '2', '同意', 7, '2023-12-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410323536661', '2022年佛山测绘项目技术劳务协议', 578231.60, '0040', NULL, NULL, 148, '2022-04-08', NULL, '本协议费用采用总价承接方式。', '2022-04-15', NULL, NULL, '2', NULL, 7, '2022-04-15', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410330338203', '大疆环飞设备采购合同', 29100.00, '0046', '王茂羽', '13980067269', 22, '2020-10-10', NULL, NULL, '2020-10-13', NULL, NULL, '2', NULL, 7, '2020-10-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410333227050', '关河（盐津县豆沙镇林家渡段）、横江（盐津县马岭岩段）河道治理工程测量技术劳务协议', 78000.00, '0151', NULL, NULL, 22, '2021-03-04', NULL, '合同总价：￥78000.00元（柒万捌仟元整）。以上费用包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用。', '2021-03-10', NULL, NULL, '2', NULL, 7, '2021-03-09', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410333912814', '西藏琼结县第三次全国土壤普查项目劳务合作协议', 176000.00, '0068', NULL, NULL, 148, '2023-11-22', NULL, '经双方协商一致，本协议为单价合同，含税单价为2200元/点，乙方至少需要采样80个点。本协议预计价为人民币176000.00元（大写人民币：壹拾柒万陆仟元整），适用增值税税率6%，最终价根据工作量据实结算。', '2023-11-24', NULL, NULL, '2', '已核', 7, '2023-11-24', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410334222405', '国投玛纳斯10万千瓦/40万千瓦时储能配套40 万千瓦光伏市场化并网发电项目岩土样品试验及电阻率测试劳务合作', 9080.00, '0169', NULL, NULL, 148, '2022-12-20', NULL, '本协议费用采用 含税单价承包承接方式。', '2022-12-20', NULL, NULL, '2', '已核', 7, '2022-12-20', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410340216630', '重庆轨道交通4号线西延伸段工程施工监测及控制测量项目合作协议', 5450000.00, '0183', '杨金虎', '13657678783', 22, '2021-07-20', NULL, '经甲乙双方友好协商，本协议为含税总价人民币为：545.00万元整（大写：伍佰肆拾伍万元整），其中增值税率为6%。', '2021-07-23', NULL, NULL, '2', NULL, 7, '2021-07-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410340525059', '德阳市罗江自然资源局全域1:500数字化地形（地籍）测量（倾斜摄影模型房屋采集生产）技术劳务合同', 9000.00, '0165', NULL, NULL, 22, '2021-03-15', NULL, '经双方友好协商，本合同金额为: &yen;9000元（大写: 人民币玖仟元整）。\n以上费用包干使用，即已包含作业费、规费、利润、管理费、安全生产投入及文明施工措施费等所有费用费。', '2021-03-19', NULL, NULL, '2', NULL, 7, '2021-03-18', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410341676430', '甘孜2023C49、楞古2023C19航飞数据采集技术服务协议', 80400.00, '0054', NULL, NULL, 148, '2023-10-19', NULL, '本协议采用总价承包模式，协议总金额为80400.00元（大写：捌万零肆百元整）。', '2023-10-20', NULL, NULL, '2', '已核', 7, '2023-10-20', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410345701216', '营山县城北综合停车场项目工程勘察钻探劳务合同', 21489.00, '0060', NULL, NULL, 148, '2022-04-20', NULL, '勘察野外钻探总工作量最终以实际完成工作量结算', '2023-02-25', NULL, NULL, '2', '未见主合同，建议我方收到相应合同款项后再进行支付', 7, '2022-04-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410349918573', '2020年西华段铁路沿线环境品质提升工程测绘项目技术劳务合同', 43491.00, '0018', '尚进', NULL, 22, '2020-09-02', NULL, '7.1合同价款：\n经甲乙双方协商，本项目劳务协作采用单价计价模式。以固定单价：1.00元/平方米进行结算。单价包含本项目所有费用。该包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费。该单价在合同有效期内不予调整。发生合同规定以外的工作时费用另计。\n7.2支付：\n（1）合同价结算方式：按测绘成果实际工程量*固定单价=最终合同总价。', NULL, NULL, NULL, '2', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410351880617', '黄河干流若尔盖段应急处置（抢险救灾）工程勘测劳务合同协议', 340000.00, '0091', NULL, NULL, 148, '2022-06-13', NULL, '本协议含税价格为人民币340000.00元（大写：人民币叁拾肆万元整），适用增值税税率 3 %。', '2022-06-14', NULL, NULL, '2', NULL, 7, '2022-06-14', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410353610586', '简阳市50平方公里及以上河道管理范围划定服务测绘合同', 82500.00, '0192', '陈绍国', '13980859212', 22, '2021-03-01', NULL, '4.1 合同总价为82500.00（人民币大写：捌万贰仟伍佰元整）。\n各河流费用为：\n赤水河：5000.00（人民币大写：伍仟元整）；\n高明河：5000.00（人民币大写：伍仟元整）；\n海螺河：5000.00（人民币大写：伍仟元整）；\n简乐河：2500.00（人民币大写：贰仟伍佰元整）；\n江南河：5000.00（人民币大写：伍仟元整）；\n绛溪河：5000.00（人民币大写：伍仟元整）；\n九曲河：5000.00（人民币大写：伍仟元整）；\n三星河：5000.00（人民币大写：伍仟元整）；\n石板河：5000.00（人民币大写：伍仟元整）；\n石钟河：5000.00（人民币大写：伍仟元整）；\n索溪：5000.00（人民币大写：伍仟元整）；\n杨溪河：2500.00（人民币大写：贰仟伍佰元整）；\n周家河：5000.00（人民币大写：伍仟元整）；\n壮溪河：5000.00（人民币大写：伍仟元整）；\n资水河：5000.00（人民币大写：伍仟元整）；\n永宁河：5000.00（人民币大写：伍仟元整）；\n贵平寺河：2500.00（人民币大写：贰仟伍佰元整）；\n赵家河：2500.00（人民币大写：贰仟伍佰元整）；\n祥符寺河：2500.00（人民币大写：贰仟伍佰元整）；', '2021-03-05', NULL, NULL, '2', NULL, 7, '2021-03-05', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410358908820', '南江县农房融合入库技术服务合同', 250000.00, '0187', '陈洪', NULL, 22, '2020-06-15', NULL, '1、甲方在向乙方支付项目款前，乙方需向甲方提供税点为3%或6%的增值税专用发票。\n2、工期：甲方提交成果数据并通过质检后1个月完成。', '2020-06-19', NULL, NULL, '2', NULL, 7, '2020-06-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410358965088', '泸县“房地一体”宅基地使用权、集体建设用地使用权及房屋所有权不动产登记项目技术劳务协议书', 30.00, '0191', '张小涛', NULL, 22, '2021-04-19', NULL, '本项目单价为：每户叁拾元整（￥30.00元）；该单价为综合单价，已包含作业费、规费、利润、税金（税率6%）、管理费、安全生产投入及文明施工措施费等所有费用。在合同有效期内不予调整。', '2021-04-21', NULL, NULL, '2', NULL, 7, '2021-04-21', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410362548761', '四川省达州市达州绕城高速公路外业补充测绘项目合同文件', 90000.00, '0015', NULL, NULL, 148, '2021-09-20', NULL, '本合同为单价合同，合同预算金额为9万元（大写人民币玖万元整）。', '2021-09-22', NULL, NULL, '2', NULL, 7, '2021-09-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410365792676', '沐川县林权登记数据整合建库采购项目合作协议', 3344000.00, '0103', NULL, NULL, 148, '2021-09-24', NULL, '本协议为含税总价人民币为：3344000元整（大写：叁佰叁拾肆万肆仟元整），其中增值税率为6%。若提供税票的税率不足6%，差异部分乙方需补足。乙方自行负责所派驻项目现场人员的人身安全，购买人身保险，配备必要的安全防护设施，本协议甲方认为其费用已包含在相应协议价之中，不再另行支付费用。', '2021-09-28', NULL, NULL, '2', NULL, 7, '2021-09-28', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410368646951', '万达地理信息系统 V5.0软件销售合同', 30509.00, '0190', NULL, NULL, 148, '2021-10-20', NULL, '软件产品的实际价格合计是：￥30509.00元人民币，大写金额为：人民币：叁万零伍佰零玖元整 。合同签订后，乙方为甲方及使用方提供系统安装、调试、培训服务，自软件应用的项目验收后一年内提供免费的系统升级与维护服务，相关费用均包含于合同额中；超出质保期如需乙方继续提供系统升级与维护服务，服务费为合同总额的5%，或乙方直接与软件使用方商定系统升级与维护服务费用。', '2021-10-22', NULL, NULL, '2', NULL, 7, '2021-10-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410382553921', '南充市高坪区白塔街道景秀东方崩塌等30处地质灾害隐患点防治工程技术服务合同', 53200.00, NULL, NULL, NULL, 148, '2022-12-05', NULL, '第一批次的费用为53200元。后续批次经南充市高坪区自然资源和规划局划定需要实施的点位数量后，甲方按划定的点位数和双方约定的技术服务单价计算总技术服务费，并按上述付费方式支付。', '2022-12-05', NULL, NULL, '2', '已核', 7, '2022-12-05', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410387275273', '金沙江金沙水电站厂坝工程施工期安全监测工程项目坝前泥沙淤积及坝下游冲刷监测水下横断面测量技术服务协议', 602000.00, '0014', NULL, NULL, 22, '2020-08-02', NULL, '4.1计费标准：\n经甲、乙双方协商，本合同采用总价包干模式，合同总金额为: &yen;602000.00元，（大写:人民币陆拾万贰仟元整）。\n以上费用包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费等所有费用。', '2020-08-12', NULL, NULL, '2', NULL, 7, '2020-08-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410388609487', '藏东南2023C98测绘项目技术服务协议', 163460.00, '0014', NULL, NULL, 148, '2024-01-05', NULL, '经甲乙双方协商一致，本协议采用总价承包模式，协议总金额为163460.00元（大写：壹拾陆万叁仟肆佰陆拾元整）。', '2024-01-05', NULL, NULL, '2', '同意', 7, '2024-01-05', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410390826943', '广元市利州区河湖岸线划定服务单位（南河、清江河、白龙江）河道管理范围划定服务', 15000.00, '0192', '黄梅琳、王智红', NULL, 22, '2020-06-22', NULL, NULL, '2020-06-29', NULL, NULL, '2', NULL, 7, '2020-06-29', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410393834485', '昭通2023W12航飞数据采集技术服务协议', 70000.00, '0054', NULL, NULL, 148, '2023-06-05', NULL, '经甲乙双方协商一致，本协议采用总价承包模式，协议总金额为70000.00元（大写：柒万元整）。', '2023-06-05', NULL, NULL, '2', '已核', 7, '2023-06-05', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410394590004', '卫星数据服务合同补充协议', 67860.00, '0039', NULL, NULL, 148, '2021-11-15', NULL, '本合同总金额为人民币陆万柒仟捌佰陆拾元整  （￥67860.00）。编程采集周期至2022年01月16日，如未完成数据采集，甲方有权终止合同并按实际交付数据面积结算合同额；或乙方征得甲方同意后，可延期继续编程采集数据完成本合同全部工作。', '2021-11-19', NULL, NULL, '2', NULL, 7, '2021-11-16', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410396262814', '西藏自治区羊湖电站羊湖取水口导水槽修建施工劳务施工分包合同', 25000.00, '0166', NULL, NULL, 148, '2024-04-22', NULL, '本合同采用总价包干合同形式。', '2024-04-25', NULL, NULL, '2', '同意', 7, '2024-05-10', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410401840030', '第六师106团兵准园区低碳转型新增负荷配套15万千瓦项目工程勘察钻探劳务合同', 72000.00, '0168', NULL, NULL, 148, '2024-06-03', NULL, '本合同为单价合同，预计工天16天。', '2024-06-03', NULL, NULL, '2', '已核', 7, '2024-06-03', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410401840031', '仪陇县林权数据整合建库采购项目数据入库技术服务合同', 50000.00, '0187', NULL, NULL, 59, '2024-06-24', NULL, '向平台软件供应商采购的数量入库服务，仅内业。', NULL, NULL, NULL, '2', NULL, NULL, '2024-06-24', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410401840032', '佛山国家高新区东部现代物流产业集聚区南海片区基础设施建设项目（佛山国家高新区东部现代物流产业集聚区南海片区互通建设项目）测绘服务项目劳务合作协议', 105298.41, '0040', NULL, NULL, 148, '2024-06-25', NULL, '主合同和分包合同为单价合同，合同金额为预计金额。分包合同适用税率3%。', NULL, NULL, NULL, '2', NULL, NULL, '2024-06-25', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410401840033', '佛山国家高新区东部现代物流产业集聚区南海片区基础设施建设项目（佛山国家高新区东部现代物流产业集聚区南海片区互通建设项目）用地范围国有土地上房屋征收测绘服务项目劳动合作协议', 66205.00, '0040', NULL, NULL, 148, '2024-06-25', NULL, '主合同和分包合同均为单价合同，合同金额为预计金额。分包合同适用税率3%。', NULL, NULL, NULL, '2', NULL, NULL, '2024-06-25', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410401840034', '南海区桂澜路北延线工程一期（里水段）项目劳务合作协议', 0.00, '0040', NULL, NULL, 148, '2024-06-25', NULL, '分包合同为单价合同，根据工作量据实结算，适用税率3%。', NULL, NULL, NULL, '2', NULL, NULL, '2024-06-25', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410401840035', '南海区桂澜路北延线工程二期（里水段）项目劳务合作协议', 0.00, '0040', NULL, NULL, 148, '2024-06-25', NULL, '分包合同为单价合同，根据工作量据实结算，适用税率3%。', NULL, NULL, NULL, '2', NULL, NULL, '2024-06-25', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410401840036', '大唐玉曲河水电开发有限公司田妥光伏发电项目勘察钻探劳务合同', 490000.00, '0147', NULL, NULL, 148, '2024-06-27', NULL, NULL, NULL, NULL, NULL, '2', NULL, NULL, '2024-06-27', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410401840037', '2023W29喀什地区莎车县、塔县航飞数据采集及像控点测量技术服务协议', 180000.00, '0054', NULL, NULL, 22, '2024-06-25', NULL, NULL, NULL, NULL, NULL, '2', NULL, NULL, '2024-07-01', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410401840038', '2023W29喀什地区伽师县航飞数据采集及像控点测量技术协议', 348000.00, '0054', NULL, NULL, 22, '2024-06-27', NULL, NULL, NULL, NULL, NULL, '2', NULL, NULL, '2024-06-27', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410404249071', '丰都、遂宁蓬溪、汉源、老鹰岩、雅安应急、凤台、金华、芝溪河、河沙镇、鲤鱼塘等项目测图技术劳务合同', 55412.00, '0027', NULL, NULL, 22, '2020-12-04', NULL, '第五条合同价款：\n经甲乙双方协商，本合同采用总价承包计价模式。合同含税总金额为55412.00元。本合同价在合同有效期内不予调整。发生合同规定以外的工作时费用另计。以上已包含完成合同所有工作的作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费。', '2020-12-14', NULL, NULL, '2', NULL, 7, '2020-12-07', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410404541625', '邛崃市地下管线普查成果更新探测服务项目技术劳务合同', 1748046.00, '0140', '夏时顺', NULL, 22, '2021-05-14', NULL, '8.1合同价款：\n1）经双方友好协商，本合同采用单价计价模式，其中：全野外探测单价（含税，税率6%）为2185.00元/公里，内外业结合核实探测单价（含税，税率6%）为800.40元/公里。暂定总金额为: &yen;1748046.00元，（大写:壹佰柒拾肆万捌仟零肆拾陆元整）\n2）合同总金额=（全野外探测单价×全野外探测实际提交长度）+（内外业结合核实探测单价×内外业结合核实探测实际提交长度），实际提交长度为入库合格后的全野外探测、内外业结合核实探测管线长度，若数据库成果中的内外业结合核实探测数量大于预估数量的，按数据库成果相应数量进行结算；数据库成果中的内外业结合核实探测数量小于或等于预估数量的，按实际完成数量进行结算。合同总金额超出暂定总金额时按暂定总金额结算。\n3）可直接利用的地下管线普查成果不计入经费计算。', '2021-05-19', NULL, NULL, '2', NULL, 7, '2021-05-18', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410412930676', '软件技术服务合同（Ecarto河长制数据编辑建库系统）', 10000.00, '0192', NULL, NULL, 22, '2020-06-15', NULL, NULL, '2020-06-29', NULL, NULL, '2', NULL, 7, '2020-06-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410425955819', '沙湾区集体土地所有权确权登记成果更新汇交工作技术服务协议', 606880.00, '0103', NULL, NULL, 148, '2023-06-19', NULL, '本协议采用总价承包模式，含税总金额为606880.00元（大写：陆拾万零陆仟捌佰捌拾元整），适用增值税税率为6%。', '2023-06-19', NULL, NULL, '2', '同意', 7, '2023-06-19', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410426851877', '色达2023C33航飞数据采集技术服务协议', 60000.00, '0054', NULL, NULL, 148, '2023-06-05', NULL, '经甲乙双方协商一致，本协议采用总价承包模式，协议总金额为60000.00元（大写：陆万元整）。', '2023-06-05', NULL, NULL, '2', '已核', 7, '2023-06-05', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410429216505', '邻水县农村土地承包经营权确权登记颁证数据库成果汇交项目技术服务合同', 34500.00, '0089', NULL, NULL, 22, '2020-10-13', NULL, '合同单价为15元/组，项目总价&yen;34500元（大写：叁万肆仟伍佰元整），费用包干使用。', '2020-10-22', NULL, NULL, '2', NULL, 7, '2020-10-16', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410431581880', '泸县2022年度国土变更调查及日常变更工作项目劳务合作协议', 1460000.00, '0089', NULL, NULL, 148, '2023-01-05', NULL, '经甲乙双方协商一致，本协议采用总价承包模式，含税总金额为1460000.00元', '2023-01-09', NULL, NULL, '2', '同意', 11, '2023-03-23', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410431706819', '芦山市政设施恢复地形图测绘、简阳放生坝砂石储量调查、成鹏快速路地形图测绘项目劳务合作协议', 59657.00, '0033', NULL, NULL, 148, '2023-02-23', NULL, '本协议费用采用 总价 承接方式。', '2023-02-23', NULL, NULL, '2', '已核', 7, '2023-02-23', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410433439953', '大唐玉曲河水电开发有限公司美玉光伏发电项目勘察钻探劳务协议', 116500.00, '0097', NULL, NULL, 148, '2023-07-14', NULL, '本合同合计总金额为116500.00元，大写：壹拾壹万陆仟伍佰元整。乙方应开具勘察类的增值税专用发票，税率不低于3%。', '2023-07-18', NULL, NULL, '2', '已核', 7, '2023-07-14', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410434592922', '山西沁水抽水蓄能电站可研阶段灰岩料场地形图技术服务协议', 20000.00, '0054', NULL, NULL, 148, '2023-03-03', NULL, '本协议费用采用总价承接方式。', '2023-03-03', NULL, NULL, '2', '已核', 7, '2023-03-03', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410434669840', '测绘成果质量检验数据采集委托协议', 120780.00, '0022', NULL, NULL, 148, '2021-10-28', NULL, '检验数据采集经费总额为：￥120780.00元(大写：壹拾贰万零柒佰捌拾元整)', '2021-10-29', NULL, NULL, '2', NULL, 7, '2021-10-29', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410437200822', '藏东南2023C95测绘项目技术服务协议', 300542.00, '0014', NULL, NULL, 148, '2023-12-21', NULL, '经甲乙双方协商一致，本协议采用总价承包模式，协议总金额为300542.00元（大写：叁拾万零伍佰肆拾贰元整）。', '2023-12-21', NULL, NULL, '2', '已核', 7, '2023-12-21', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410437779172', '牙根二级、瀑布沟丰乐浸水湾、老木孔移民征地、长河坝牛棚子沟、丹巴-绒坝沟地形图测绘技术服务协议', 102390.00, '0021', NULL, NULL, 148, '2023-01-06', NULL, '本协议费用采用单价承接方式。', '2023-01-06', NULL, NULL, '2', '已核', 7, '2023-01-06', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410439585113', '新都区石板滩廖家大院、黄氏祠堂文物搬迁保护设计项目勘察钻探劳务合同', 29700.00, '0060', NULL, NULL, 148, '2023-10-13', NULL, '采用综合单价模式。乙方应开具勘察类的增值税专用发票，税率不低于3%。主合同已经全额收款，收款6万元。', '2023-10-18', NULL, NULL, '2', '已核', 7, '2023-10-13', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410440617772', '拉萨2023W13测绘项目技术服务协议', 350000.00, '0124', NULL, NULL, 148, '2023-08-01', NULL, '本协议含税总价为人民币350000.00元（大写人民币：叁拾伍万元整），适用增值税税率6%。', '2023-08-01', NULL, NULL, '2', '已核', 7, '2023-08-01', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410441846483', '昭化区林权权籍补充调查项目技术服务协议', 144000.00, '0035', NULL, NULL, 148, '2023-02-22', NULL, '本协议费用采用单价承接方式，根据每个实际完成的分项来结算。', '2023-02-23', NULL, NULL, '2', '已核', 7, '2023-02-23', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410443390436', '老木孔航电枢纽工程1:500水下地形及断面测量和牙根一级水电站产卵场1:1000地形图测绘技术服务协议', 141920.00, '0087', NULL, NULL, 148, '2021-10-18', NULL, '经甲乙双方协商，本协议为总价承包计价模式，含税总价为141920元（大写：壹拾肆万壹仟玖佰贰拾元整）。其中老木孔航电枢纽工程1:500水下地形图测量费用为80000.00元（大写：捌万元整）；防洪堤1:200断面测量按每公里1300.00元计费，断面测量长度约18.4km，金额为23920.00元（大写：贰万叁仟玖佰贰拾元整）；牙根一级水电站产产卵场1:1000地形图测量费用为38000.00元（大写：叁万捌仟元整）。', '2021-10-20', NULL, NULL, '2', NULL, 7, '2021-10-20', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410443458584', '泸县“房地一体”宅基地使用权、集体建设用地使用权及房屋所有权不动产登记项目技术劳务协议书', 30.00, '0077', '黄梅琳', NULL, 22, '2021-04-19', NULL, '本项目单价为：每户叁拾元整（￥30.00元）；该单价为综合单价，已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用。在合同有效期内不予调整。', '2021-04-21', NULL, NULL, '2', NULL, 7, '2021-04-21', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410447862750', '仁怀市北部新城-南部新城片区航飞影像及1：500地形图测绘空三加密、影像图及数据编辑技术服务协议', 905580.00, '0193', NULL, NULL, 148, '2022-03-22', NULL, '本协议含税价格为人民币 905580.00元（大写：玖拾万伍仟伍佰捌拾元整），适用增值税税率 6 %。本协议包括乙方提供本协议范围内所有技术服务所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。', '2022-03-24', NULL, NULL, '2', NULL, 7, '2022-03-24', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410454874146', '测绘成果质量检验协议', 45000.00, '0194,0078', NULL, NULL, 148, '2023-12-15', NULL, NULL, '2023-12-18', NULL, NULL, '2', '已核', 7, '2023-12-15', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410457130939', '安徽2023C80航飞数据采集技术服务协议', 65600.00, '0054', NULL, NULL, 148, '2023-11-17', NULL, NULL, '2023-11-17', NULL, NULL, '2', '已核', 7, '2023-11-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410459763643', '大疆环飞设备（第二套）采购合同', 14100.00, '0046', '王茂羽', '13980067269', 22, '2020-10-20', NULL, '本协议采购的设备共计&yen; 14100.00。', '2020-12-10', NULL, NULL, '2', NULL, 7, '2020-10-23', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410460945903', '青海黄河玛尔挡水电站水库泥沙监测劳务协议', 4739087.15, '0055', NULL, NULL, 148, '2023-05-01', NULL, NULL, '2023-05-04', NULL, NULL, '2', '已核', 7, '2023-05-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410462503511', '江油抽水蓄能电站预可阶段测绘项目技术劳务协议', 125254.00, '0077', NULL, NULL, 148, '2021-10-08', NULL, '预计总价125254。该项目为单价协议，工作量以实际工作量据实结算。', '2021-10-08', NULL, NULL, '2', NULL, 7, '2021-10-08', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410465032714', '昭化区林权权籍补充调查项目技术服务协议', 2076800.00, '0094', NULL, NULL, 148, '2022-09-15', NULL, '主合同为单价合同，单价为21元/宗，暂定宗数为35万宗。分包合同为单价合同，单价为18.88元/宗，暂定宗数为11万宗。', '2022-09-15', NULL, NULL, '2', '已核', 7, '2022-09-15', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410465949634', '第六师106团兵准园区低碳转型新增负荷配套15万千瓦项目工程勘察工作检测协议', 21200.00, '0169', NULL, NULL, 148, '2024-06-19', NULL, '适用增值税税率6%', NULL, NULL, NULL, '2', NULL, NULL, '2024-06-19', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410469177171', '测绘成果质量检验数据采集委托协议补充协议', 65000.00, '0017', NULL, NULL, 148, '2022-10-27', NULL, NULL, '2022-10-27', NULL, NULL, '2', '同意办理，支付的费用需从劳务分包队伍中扣除', 7, '2022-10-27', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410469691518', '叶巴滩混蓄预可研阶段无人机正射摄影采集项目劳务协议', 25000.00, '0032', NULL, NULL, 148, '2021-09-16', NULL, '本协议为总价协议，项目协议总费用为：&yen;25000.00元，大写：人民币贰万伍仟元整。', '2021-09-17', NULL, NULL, '2', NULL, 7, '2021-09-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410474468560', '文殊坊周边环境综合提升工程测绘项目技术服务协议', 57590.00, '0025', NULL, NULL, 148, '2022-07-11', NULL, '本协议含税价格为人民币57590.00元（大写：伍万柒仟伍佰玖拾元整），适用增值税税率 3 %。', '2022-07-11', NULL, NULL, '2', NULL, 7, '2022-07-11', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410476466071', '甘孜州6条州级河道管理范围划定服务测绘合同', 35000.00, '0192', '陈绍国', '13980859212', 22, '2021-05-11', NULL, '4.1 合同总价为35000.00（人民币大写：叁万伍仟元整）。\n各河流费用为：\n绰斯甲河：10000.00（人民币大写：壹万元整）；\n松林河：5000.00（人民币大写：伍仟元整）；\n田湾河：5000.00（人民币大写：伍仟元整）；\n小金川：5000.00（人民币大写：伍仟元整）；\n东谷河：5000.00（人民币大写：伍仟元整）；\n革什扎河：5000.00（人民币大写：伍仟元整）。', '2021-05-24', NULL, NULL, '2', NULL, 7, '2021-05-13', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410483748441', 'YX2023C23测绘项目技术服务协议', 34500.00, '0021', NULL, NULL, 148, '2023-12-12', NULL, '经甲乙双方协商一致，本合同采用总价承包模式，协议总金额为34500.00元（大写：叁万肆仟伍佰元整），适用增值税税率6%。', '2023-12-12', NULL, NULL, '2', '已核', 7, '2023-12-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410484231229', '新能源在役风电场2023年度沉降观测及水平度、垂直度检测劳务合作协议', 380984.00, '0155', NULL, NULL, 148, '2023-12-25', NULL, '本协议含税价格为人民币380984.00元（大写：人民币叁拾捌万零玖佰捌拾肆元整），适用增值税税率 6 %。', '2023-12-26', NULL, NULL, '2', '已核', 7, '2023-12-26', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410486875598', '金沙江上游川藏段（西藏侧）河道管理范围划定服务项目（界桩部分）技术服务协议', 273950.00, '0077', NULL, NULL, 148, '2022-06-20', NULL, '本协议含税价格为人民币273950.00元（大写：贰拾柒万叁仟玖佰伍拾元整），适用增值税税率 3 %。本协议包括乙方提供本协议范围内所有技术服务所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。', '2022-06-21', NULL, NULL, '2', NULL, 7, '2022-06-21', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410488981500', '凉山州自然资源局2021年度国土变更调查项目劳务协议', 317050.00, '0123', NULL, NULL, 148, '2022-01-10', NULL, '经双方友好协商，本协议总价款为:317050.00元，（大写:人民币叁拾壹万柒仟零伍拾元整），适用增值税税率为6%。本协议为固定不变价格，包括乙方提供本协议所需的全部费用(包含完成工作内容所需的基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。', '2022-01-12', NULL, NULL, '2', NULL, 7, '2022-01-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410492709364', '古蔺县河湖划定项目劳务合作协议', 929663.00, '0152', NULL, NULL, 148, '2021-11-17', NULL, '本协议费用采用单价承接方式，河道9990.55元/km，水库12667元/座。本协议暂定含税总价为人民币929663.00元（大写人民币：玖拾贰万玖仟陆佰陆拾叁元整）,适用增值税税率3%。', '2021-11-17', NULL, NULL, '2', '已核', 7, '2023-11-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410493130731', '龙泉驿区1:500系列数字测绘产品生产与更新项目（第二包）监理服务技术服务协议', 814206.00, '0149', NULL, NULL, 148, '2022-02-17', NULL, '经甲乙双方友好协商，本协议为含税总价人民币为： 814206元（大写：捌拾壹万肆仟贰佰零陆元整），其中增值税率为6%。', '2022-02-18', NULL, NULL, '2', NULL, 7, '2022-02-18', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410495370257', '泸县2020年度国土变更调查项目劳务协议书', 682500.00, '0089', '钟一兵', NULL, 22, '2021-03-01', NULL, '经双方友好协商，本劳务协议书总价款为:&yen;682,500.00 元，（大写:人民币陆 拾捌万贰仟伍佰元整）。结算根据最终数据库中举证图斑结算，举证图斑以 50 元/图斑结算，如结算金额大于中标价协议书总价款，以总价款结算，如结束金 额小于总价款，以最终举证图斑数量结算，所有相关数据整合、数据分析、数据 库建设等工作需按部、省安排开展，不做另行结算。', '2021-03-05', NULL, NULL, '2', NULL, 7, '2021-03-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410496154992', '罗江县房地一体1:500地形图修测技术服务合同', 78439.60, '0077', '黄梅琳', NULL, 22, '2021-04-15', NULL, '本合同为总价合同，总价为￥78439.6元。\n以上费用包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用。', '2021-04-19', NULL, NULL, '2', NULL, 7, '2021-04-19', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410499791597', '邻水县农村集体土地大比例尺图实测和确权登记发证项目', 1800000.00, '0036', NULL, NULL, 22, '2020-12-21', NULL, '1、本项目单价为：每宗地肆拾伍元整（￥45.00元）；该单价为综合单价，已包含作业费、规费、利润、税金（税率6%）、管理费、安全生产投入及文明施工措施费等所有费用费。在合同有效期内不予调整。\n2、本项目预估总金额为壹佰捌拾万元整（￥1800000.00元），结算金额根据实际完成宗地量进行结算。', '2020-12-23', NULL, NULL, '2', NULL, 7, '2020-12-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410501888886', '数据技术服务合同', 40000.00, '0006', NULL, NULL, 148, '2021-11-03', NULL, '本合同总金额为人民币 肆万元整  （人民币￥40000.00）', '2021-11-05', NULL, NULL, '2', NULL, 7, '2021-11-05', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410507044661', '天府大道北延线(成都段)项目新都区范围内基本农田补划方案编制、听证及评估论证等6个项目技术服务协议', 1389960.00, '0014', NULL, NULL, 148, '2022-05-27', NULL, '本协议含税价格为人民币1389960.00元（大写：壹佰叁拾捌万玖仟玖佰陆拾元整），适用增值税税率为3%。本协议包括乙方提供本协议范围内所有技术服务所需的全部费用（包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）。', '2022-05-27', NULL, NULL, '2', NULL, 7, '2022-05-27', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410516860057', '玛尔挡水电站库区水温观测服务合同文件', 2380000.00, '0182', NULL, NULL, 148, '2023-12-01', NULL, NULL, '2023-12-04', NULL, NULL, '2', '已核', 7, '2023-12-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410517566825', '祥云财富工业园区有色金属循环产业园（一期）工程规划一路、规划二路勘察设计施工总承包（EPC）地形图测量', 63670.00, '0175', NULL, NULL, 148, '2022-07-11', NULL, '本协议含税价格为人民币63670.00元（大写：陆万叁仟陆佰柒拾元整），适用增值税税率 6 %。', '2022-07-12', NULL, NULL, '2', NULL, 7, '2022-07-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410520082243', '岗托2023C69航飞数据采集技术服务协议', 150000.00, '0054', NULL, NULL, 148, '2024-01-29', NULL, '经甲乙双方协商一致，本协议采用总价承包模式，协议总金额为150000.00元（大写：壹拾伍万元整）。', '2024-01-31', NULL, NULL, '2', '已核', 7, '2024-02-01', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410521634171', '卫星数据服务合同', 606680.00, '0039', '杨卫', NULL, 22, '2021-08-24', NULL, '本合同总金额为人民币陆拾万零陆仟陆佰捌拾元整 （￥606680.00）。', '2021-09-06', NULL, NULL, '2', NULL, 7, '2021-09-01', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410524176422', '三台县2021年灾毁农田修复项目田型调整测量项目技术服务协议', 246188.80, '0158', NULL, NULL, 148, '2022-08-16', NULL, '本协议含税总价暂定为人民币246188.8元（大写人民币：贰拾肆万陆仟壹佰捌拾捌元捌角整），适用增值税税率6%。', '2022-08-19', NULL, NULL, '2', '同意', 7, '2022-08-19', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410526157000', '南江抽水蓄能电站预可阶段测绘项目技术服务协议', 45996.00, '0077', NULL, NULL, 148, '2022-04-08', NULL, '本协议费用采用总价承接方式。', '2022-04-08', NULL, NULL, '2', NULL, 7, '2022-04-08', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410530336523', '清城区粮食生产功能区调整补划项目技术服务协议', 48188.00, '0089', NULL, NULL, 148, '2021-09-20', NULL, '合同金额为（大写）：肆万捌仟壹佰捌拾捌元整（48188.00元）', '2021-09-20', NULL, NULL, '2', NULL, 7, '2021-09-20', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410531686583', '四川省李家岩水库永久界桩测设及埋设工程服务项目技术服务合同', 236600.00, '0117', '孙亚东', NULL, 22, '2020-01-13', NULL, '经双方友好协商，本合同暂定价款为: &yen;23.66万元（大写:贰拾叁万陆仟陆佰元整）。以上费用包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费等所有费用。', '2020-01-07', NULL, NULL, '2', NULL, 7, '2020-01-16', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410531922000', '老木孔航电枢纽工程防洪堤带状激光数据采集及龚嘴项目无人机影像采集技术服务协议', 20000.00, '0011', NULL, NULL, 148, '2021-12-20', NULL, '经甲乙双方协商，本协议为总价承包计价模式，含税总价为20000.00元（大写：贰万元整）。其中老木孔航电枢纽工程防洪堤带状激光数据采集测量费用为15000.00元（大写：壹万伍仟元整）；龚嘴项目无人机影像采集测量费用为5000.00元（大写：伍仟元整）。', '2021-12-22', NULL, NULL, '2', NULL, 7, '2021-12-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410532886771', '自贡市水系连通用地土地勘测测绘采购项目劳务合作协议', 170369.00, '0138', NULL, NULL, 148, '2022-07-16', NULL, '本协议含税价格为人民币170369.00元（大写：壹拾柒万零叁佰陆拾玖元整），适用增值税税率 3 %。', '2022-07-18', NULL, NULL, '2', '同意办理', 7, '2022-07-18', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410535592485', '邻水县农村集体土地大比例尺图实测和确权登记发证项目合作协议', 236000.00, '0036', NULL, NULL, 148, '2021-08-16', NULL, '经甲乙双方友好协商，本协议为含税总价人民币为：236000元整（大写：贰拾叁万陆仟元整），其中增值税率为6%，结算金额根据实际完成宗地量进行结算。本项目单价为：每宗地伍拾玖元整（￥59.00元）；该单价为综合单价，已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费，在合同有效期内不予调整。', '2021-08-17', NULL, NULL, '2', NULL, 7, '2021-08-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410544295981', '彭州市2022年国土变更调查监理项目技术服务协议', 167926.00, '0023', NULL, NULL, 148, '2023-06-06', NULL, '本协议含税总价为人民币167926.00元（大写人民币：壹拾陆万柒仟玖佰贰拾陆元整），适用增值税税率1%。', '2023-06-07', NULL, NULL, '2', '同意', 7, '2023-06-07', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410553852852', '宁南县测量标志普查维护项目劳务合作协议', 618062.00, '0105', NULL, NULL, 148, '2023-01-03', NULL, '本协议费用采用 总价承接方式。', '2023-01-03', NULL, NULL, '2', '已核', 7, '2023-01-03', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410553915028', '邻水县上白水河、中白水河河道管理范围划定项目1:2000比例尺地形图测量、河道断面测量技术协作协议', 50000.00, '0014', NULL, NULL, 148, '2021-08-16', NULL, '经甲乙双方协商，本协议采用总价承包计价模式。协议含税总金额为50000.00元（大写：人民币伍万元整），本协议的价格在协议有效期内不予调整。发生协议规定以外的工作时费用另计。以上已包含完成协议所有工作的作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用。乙方应当按甲方工期要求提交成果，甲方应自接到数据成果之日起30日内完成检查。', '2021-08-18', NULL, NULL, '2', NULL, 7, '2021-08-18', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410571332793', '泸县“房地一体”宅基地使用权、集体建用地使用权及房屋所有权不动产权登记项目劳务协议书', 2523200.00, '0089', '钟一兵', NULL, 22, '2020-11-10', NULL, '经双方友好协商，本劳务协议书总价款为:&yen;2,523,200.00元，（大写:人民币贰佰伍拾贰万叁仟贰佰元整），该劳务协议书总价已包含第二点报价表中所有内容，最终结算是按单价（76元/户）乘以实际完成户数（一户多宅算一户）按实结算；已颁发《集体建设用地使用权》和《房屋所有权证》的宗地户数，不需测绘直接换证的以15元/户结算，作业过程中有需乙方重测或新测房屋的，这部分单价按每户增加60元结算。', '2020-11-12', NULL, NULL, '2', NULL, 7, '2020-11-11', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410573861378', '2022年度乳源瑶族自治县自然保护地自然资源统一确权登记项目劳务合作协议', 0.00, '0070', NULL, NULL, 148, '2023-10-07', NULL, '经双方协商一致，本合同采用单价承接模式，合同单价为50元/公顷，适用增值税税率1 %。合同金额根据单价按实际工作量结算支付。', '2023-10-07', NULL, NULL, '2', '已核', 7, '2023-10-07', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410574288432', '南坪片区排水管网补勘补测项目内窥检测劳务合作协议', 274000.00, '0071', NULL, NULL, 148, '2022-04-13', NULL, '总费用预估人民币大写：贰拾柒万肆仟元整，人民币小写：274000.00元。最终按实际完成工作量结算。由于乙方前期资金困难，通过甲、乙双方友好商定：由甲方以借款方式支付乙方10万元项目款，后期乙方应向甲方补充开具合法足额的增值税专用发票，并归还完借款10万元后方可进行下一笔项目款支付，否则甲方有权拒绝支付，且不承担任何违约责任。', '2022-04-13', NULL, NULL, '2', NULL, 7, '2022-04-13', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410575236316', '罗江县房地一体1:500地形图制图技术服务合同', 127840.00, '0010', NULL, NULL, 22, '2020-06-08', NULL, NULL, '2020-06-16', NULL, NULL, '2', NULL, 7, '2020-06-09', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410578300082', '广元市鱼洞河水厂及配套管网建设项目工程勘察钻探劳务合同', 100833.00, '0060', NULL, NULL, 148, '2022-01-03', NULL, '勘察野外钻探总工作量最终以实际完成工作量结算', '2023-01-04', NULL, NULL, '2', '未见主合同，建议我们收到相应合同款后再支付', 7, '2022-01-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410580632914', '脚木足河巴拉水电站主要施工区域1:500原始地形数据采集技术服务合同', 18000.00, '0008', NULL, NULL, 22, '2021-03-08', NULL, '第四条合同总价（含税）：&yen;18000.00元（大写：壹万捌仟元整）。', '2021-03-17', NULL, NULL, '2', NULL, 7, '2021-03-10', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410581753540', '大渡河大岗山水电站GNSS基准站保护房、观测墩等修建施工分包合同', 259871.00, '0146', NULL, NULL, 148, '2023-12-08', NULL, '本合同采用单价合同形式，最终合同金额以实际发生工程量计量并验收为准，按照本分包合同单价乘以数量为本合同总费用。1240抗剪洞观测房（1座）根据目前库坝中心意见尚未明确是否重建，待1240抗剪洞观测房后边坡进行加固处理之后再决定是否重新修建。', '2023-12-08', NULL, NULL, '2', '已核', 7, '2023-12-08', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410584158782', '古蔺县河湖水域岸线管理范围划界项目技术劳务协议', 360860.00, '0145', NULL, NULL, 148, '2021-08-24', NULL, '本项目劳务费用（含税，税率6%）合计人民币：360860.00元，该协议总金额除未包含3.25万元的入库检查费外已包括完成本协议内容所需的一切费用。当入库检查费超过3.25万元时，甲方扣减超出部分的费用。', '2021-08-30', NULL, NULL, '2', NULL, 7, '2021-08-26', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410586820322', '2024W01倾斜影像数据采集技术服务协议', 70000.00, '0186', NULL, NULL, 148, '2024-01-05', NULL, '经甲乙双方协商一致，本协议采用总价承包模式，协议总金额为￥70000.00元（大写：柒万元整）。', '2024-01-05', NULL, NULL, '2', '已核', 7, '2024-01-05', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410587512261', '泸县“房地一体”宅基地使用权、集体建设用地使用权及房屋所有权不动产登记项目技术劳务协议书', 450000.00, '0162', '陈艳智', NULL, 22, '2021-03-15', NULL, ' 技术劳务费\n1、本项目单价为：每户肆拾伍元整（￥45.00元）；该单价为综合单价，已包含作业费、规费、利润、税金（税率6%）、管理费、安全生产投入及文明施工措施费等所有费用。在协议书有效期内不予调整。\n2、本项目预估总金额为肆拾伍万元整（￥450000.00元），结算金额根据实际完成户数（一户多宅算一户）进行结算。', '2021-03-19', NULL, NULL, '2', NULL, 7, '2021-03-18', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410588711226', '邻水县易地搬迁农户房屋测绘服务项目劳务合作协议', 29800.00, '0080', NULL, NULL, 148, '2023-04-11', NULL, '本协议费用采用 总价承接方式。', '2023-04-11', NULL, NULL, '2', '已核', 7, '2023-04-11', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410589072835', '泸县2022年度国土变更调查及日常变更工作项目劳务合作协议', 63000.00, '0036', NULL, NULL, 148, '2023-01-11', NULL, '本协议费用采用 单价 承接方式。', '2023-01-11', NULL, NULL, '2', '已核', 7, '2023-01-11', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410590045289', '成都高新区“实景三维成都”建设服务项目技术服务协议', 1845000.00, '0129', NULL, NULL, 148, '2024-04-29', NULL, '本协议费用采用包干单价承接方式，包干单价按15000元/平方公里计费，预估工作量为123平方公里，预估总价为人民币1845000元', '2024-04-30', NULL, NULL, '2', '已核', 7, '2024-04-30', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410590333491', '马尔康市赶羊沟水厂建设项目工程勘察钻探劳务合同', 92276.00, '0012', NULL, NULL, 148, '2022-07-11', NULL, '勘察野外钻探总工作量最终以实际完成工作量结算', '2022-07-12', NULL, NULL, '2', '未见主合同，建议我们收到相应合同款后再支付', 7, '2022-07-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410591042979', '万达地理信息系统 V5.0软件销售合同书（B25道路及配套工程排水管道内窥试验检测项目）', 21369.00, '0190', '魏学渊、王羽', NULL, 22, '2021-08-16', NULL, '订制软件产品用于B25道路及配套工程排水管道内窥试验检测项目，总价为￥21369.00元人民币，大写金额为：人民币：贰万壹仟叁佰陆拾玖元整 。', '2021-08-31', NULL, NULL, '2', NULL, 7, '2021-08-18', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410592419583', '自来水、消火栓管网管理信息系统软件开发（重庆市两江新区龙兴、鱼复园区消火栓测量）技术开发（委托）合同', 562493.00, '0190', '王羽', NULL, 22, '2020-09-07', NULL, '本项目研究开发经费和报酬总额（含税） 562493.00元 ；（其中龙兴园区329571.00元，鱼复园区232922.00元）。', '2020-09-12', NULL, NULL, '2', NULL, 7, '2020-09-09', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410594320896', '大熊猫国家公园什邡片区勘界立标劳务合作协议', 754124.00, '0072', NULL, NULL, 148, '2022-08-03', NULL, '经甲乙双方友好协商，本协议为含税总价人民币为：754124.00元（大写：柒拾伍万肆仟壹佰贰拾肆元整），其中增值税专业发票税率为3%。本', '2022-08-04', NULL, NULL, '2', '同意办理', 7, '2022-08-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410594751720', '中江县猫儿嘴城市生活污水处理厂及配套管网改扩建工程工程勘察钻探劳务合同', 78024.00, '0060', NULL, NULL, 148, '2022-05-02', NULL, '勘察野外钻探总工作量最终以实际完成工作量结算', '2022-05-07', NULL, NULL, '2', '未见主合同，建议我们收到相应合同款后再支付', 7, '2022-05-05', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410599688292', '2021年佛山项目技术服务技术劳务协议', 753013.50, '0040', NULL, NULL, 148, '2021-11-15', NULL, '经甲乙双方协商，本协议采用总价承包计价模式。协议含税总金额为753013.50元（大写：柒拾伍万叁仟零壹拾叁元伍角），本协议的价格在协议有效期内不予调整。发生协议规定以外的工作时费用另计。以上已包含完成协议所有工作的作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费。乙方应当按甲方工期要求提交成果，甲方应自接到数据成果之日起30日内完成检查。', '2021-11-18', NULL, NULL, '2', NULL, 7, '2021-11-18', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410600092328', '老木孔航电枢纽工程库区防洪堤1:1000带状地形图测绘项目技术服务协议', 13311.00, '0077', NULL, NULL, 148, '2022-04-08', NULL, '本协议费用采用总价承接方式。', '2022-04-08', NULL, NULL, '2', NULL, 7, '2022-04-08', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410606317492', '广西上林、广东台山抽水蓄能电站航空摄影及地形图测绘技术服务协议', 150501.00, '0129', NULL, NULL, 148, '2022-09-22', NULL, '本协议费用采用单价承接方式。', '2022-09-22', NULL, NULL, '2', '同意', 7, '2022-09-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410606579397', '电脑采购合同', 156525.00, '0031', NULL, NULL, 22, '2020-09-11', NULL, '合同总金额（含税，税率13%）为：&yen;156525.00元（金额大写：壹拾伍万陆仟伍佰贰拾伍元整 ）。该费用已包括为完成本合同全部工作内容所需的人工费、材料费、仪器设备使用费、其他直接费、间接费、税金、利润等全部费用。', NULL, NULL, NULL, '2', NULL, 7, '2020-09-14', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410606656944', '水土新城排水管网精细化普查项目内窥检测劳务合作协议', 430000.00, '0071', NULL, NULL, 148, '2022-04-13', NULL, '总费用预估人民币大写：肆拾叁万元整，人民币小写：430000.00元。最终按实际完成工作量结算。由于乙方前期资金困难，通过甲、乙双方友好商定：由甲方以借款方式支付乙方20万元项目款，后期乙方应向甲方补充开具合法足额的增值税专用发票，并归还完借款20万元后方可进行下一笔项目款支付，否则甲方有权拒绝支付，且不承担任何违约责任。', '2022-04-13', NULL, NULL, '2', NULL, 7, '2022-04-13', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410609994044', '重庆第二机场地形图制图技术服务合同', 813770.00, '0132', NULL, NULL, 22, '2021-03-10', NULL, '一、取费项目及工程总价款：\n序号	工程内容	               单位      工程量（按实际工作量结算）	单价（元每平方公里）总价（元）\n1	1:500地形图制图	km²	38.00	                               15500	                589000\n2	1:1000地形图制图	km²	32.11	                                7000	                224770\n本合同预估工程总价款：（大写：捌拾壹万叁仟柒百柒拾元整）  小写： ￥813770元。\n二、最终工作量按实际完成面积结算。', '2021-03-23', NULL, NULL, '2', NULL, 7, '2021-03-11', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410612379753', '红原县规模以下河流管理保护范围划界项目劳务协议', 2540000.00, '0127', NULL, NULL, 148, '2021-02-01', NULL, '本项目劳务费用（含税，税率6%）合计人民币：2540000.00元（人民币大写：贰佰伍拾肆万元整）。入库检查费：122200.00元未包含在内，入库费从第一次支付款中扣除。', '2021-02-08', NULL, NULL, '2', NULL, 7, '2021-02-03', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410615336173', '广州白云马沥物联网产业园水系改造项目测量技术服务合同', 54000.00, '0043', NULL, NULL, 22, '2020-09-15', NULL, '第四条合同价格：经甲、乙双方协商本工程采用总价承包方式。合同金额（含税）为：&yen;55000.00元（大写：伍万五仟元整）。', '2020-09-26', NULL, NULL, '2', NULL, 7, '2020-09-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410618606360', '四川省长葫灌区一张图建设项目劳务合作协议', 222324.00, '0072', NULL, NULL, 148, '2022-07-20', NULL, '经甲乙双方友好协商，本协议为含税总价人民币为：222324.00元（大写：贰拾贰万贰仟叁佰贰拾肆元整），其中增值税专业发票税率为3%。', '2022-07-22', NULL, NULL, '2', '同意', 7, '2022-07-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410621886893', '浙江宁海抽水蓄能电站上下库库容曲线测量服务劳务合作协议', 158818.00, '0178', NULL, NULL, 148, '2022-04-13', NULL, '经双方友好协商，本协议总价款为:158818.00元，（大写:人民币壹拾伍万捌仟捌佰壹拾捌元整），适用增值税税率为6%。本协议为固定不变价格，包括乙方提供本协议所需的全部费用(包含完成工作内容所需的基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。', '2022-04-15', NULL, NULL, '2', '已阅', 7, '2022-04-15', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410624436269', 'Ecarto河长制数据编辑建库系统软件技术服务合同', 10000.00, '0192', NULL, NULL, 22, '2020-06-22', NULL, NULL, '2020-06-30', NULL, NULL, '2', NULL, 7, '2020-06-29', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410625333651', '道孚抽水蓄能电站预可阶段、叶巴滩混蓄预可研阶段、ML库区支沟补测、鲜水河3#抽水蓄能电站预可阶段、金川抽', 152656.00, '0021', NULL, NULL, 148, '2022-01-20', NULL, '经甲乙双方协商，本协议为总价承包计价模式，含税总价为152656.00元（大写：壹拾伍万贰仟陆佰伍拾陆元整）。', '2022-01-21', NULL, NULL, '2', NULL, 7, '2022-01-21', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410626881868', '泸县2022年度国土变更调查及日常变更工作项目劳务合作协议', 122500.00, '0101', NULL, NULL, 148, '2023-01-10', NULL, '本协议费用采用 单价 承接方式。', '2023-01-12', NULL, NULL, '2', '已核', 7, '2023-01-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410627928716', '简阳2023W20测绘项目', 8000.00, '0088', NULL, NULL, 148, '2023-08-23', NULL, '本协议含税总价为人民币8000.00元（大写人民币：捌仟元整），适用增值税税率1%。', '2023-08-23', NULL, NULL, '2', '已核', 7, '2023-08-23', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410629790558', '通江县自然资源和规划局农村“房地一体”确权登记发证项目劳务协议', 6934265.00, '0013', NULL, NULL, 148, '2021-04-12', NULL, '本项目单价为205.43元/宗，预估工作量33920宗，预计总价6934265元（大写：陆佰玖拾叁万肆仟贰佰陆拾伍元整）。最终结算按每宗分项价格乘以不动产登记权籍库实际入库工作量据实结算。', '2021-04-12', NULL, NULL, '2', NULL, 7, '2021-04-13', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410636351977', '喜德县自然资源局存量林权登记数据整合项目合作协议', 2467359.00, '0058', NULL, NULL, 148, '2021-09-06', NULL, '本协议为总价合同：246.7359万元整。乙方自行负责所派驻项目现场人员的人身安全，购买人身保险，配备必要的安全防护设施，本协议甲方认为其费用已包含在相应协议价之中，不再另行支付费用。', '2021-09-09', NULL, NULL, '2', NULL, 7, '2021-09-08', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410636844411', '雅砻江桐子林水电站库区滑坡体测斜钻孔恢复项目勘探劳务协议', 330000.00, '0119', NULL, NULL, 148, '2023-12-20', NULL, '经甲乙双方协商一致，本协议采用总价承包模式。', '2023-12-21', NULL, NULL, '2', '已核', 7, '2023-12-21', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410637353388', '重庆轨道交通4号线西延伸段工程施工监测及控制测量项目劳务协作协议', 800000.00, '0188', NULL, NULL, 148, '2023-08-25', NULL, '本协议为含税预估总价人民币为：80.0万元整（大写：捌拾万元整），其中增值税率为6%。', '2023-08-29', NULL, NULL, '2', '已核', 7, '2023-08-29', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410640686731', 'G7611线西昌至香格里拉段高速公路特长隧道二等控制网建立项目劳务合作协议', 1778632.00, '0184', NULL, NULL, 148, '2023-04-13', NULL, '本合同采用单价结算，合同金额为预计金额，最终费用按实际完成工作量和单价进行计算。', '2023-04-14', NULL, NULL, '2', '已核', 7, '2023-04-14', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410647091665', '甘孜抽水蓄能电站地形图测绘技术服务协议', 13836.00, '0027', NULL, NULL, 148, '2022-10-18', NULL, '本协议费用采用单价承接方式。', '2022-10-19', NULL, NULL, '2', '同意', 7, '2022-10-19', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410649310896', '2023C26金沙江1:2000地形图制图技术服务协议', 121600.00, '0014', NULL, NULL, 148, '2023-03-15', NULL, '本协议采用总价承包模式，协议总金额为121600.00元（大写：壹拾贰万壹仟陆佰元整）。', '2023-03-17', NULL, NULL, '2', '已核', 7, '2023-03-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410660824291', '惠州水环境1:500三维测图项目技术服务合同', 60357.20, '0163', NULL, NULL, 22, '2020-11-06', NULL, '经双方友好协商，本合同金额（含税，税率为3%）为: &yen;60357.2元（大写: 人民币陆万零叁佰伍拾柒元贰角整）。\n以上费用包干使用，即已包含作业费、规费、利润、管理费、安全生产投入及文明施工措施费等所有费用费。', '2020-11-10', NULL, NULL, '2', NULL, 7, '2020-11-09', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410661055827', '新华水力发电有限公司博州10万千瓦储热型光热配建90万千瓦新能源项目（一期200兆瓦）规划选址论证报告劳务', 95000.00, '0167', NULL, NULL, 148, '2022-08-03', NULL, '本协议含税价格为人民币95000.00元（大写：玖万伍仟元整），适用增值税税率 1%。', '2022-08-04', NULL, NULL, '2', '同意办理', 7, '2022-08-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410661612061', '昭化区林权权籍补充调查项目技术服务协议', 200000.00, '0157', NULL, NULL, 148, '2023-02-22', NULL, '本协议费用采用单价承接方式，根据每个实际完成的分项来结算。', '2023-02-23', NULL, NULL, '2', '已核', 7, '2023-02-23', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410662002463', '南江抽水蓄能电站预可阶段地形地类图测绘项目技术服务协议', 45000.00, '0088', NULL, NULL, 148, '2023-03-03', NULL, '本协议费用采用总价承接方式。', '2023-03-03', NULL, NULL, '2', '已核', 7, '2023-03-03', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410662368349', '四川省德昌县茨达、铁炉风电场工程地形图测绘项目技术服务合同', 86046.40, '0141', '沈燕', NULL, 22, '2020-06-02', NULL, NULL, '2020-06-05', NULL, NULL, '2', NULL, 7, '2020-06-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410663515404', '四川省绵阳市三台县河湖保护中心“三台县河道管理范围划定”测绘合同', 5000.00, '0192', NULL, NULL, 22, '2020-11-02', NULL, '1.本合同总价为5000.00元（人民币大写：伍仟元整）。\n2.服务费支付方式：\n（1）合同签订后10个工作日内，甲方一次性向乙方支付合同总金额。 \n（2）乙方在十日内完成数据试入库工作。\n（3）甲方提供合格后的最终成果供检查入库。', '2020-07-14', NULL, NULL, '2', NULL, 7, '2020-11-16', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410663703821', '资中2023C37测绘项目技术服务协议', 17000.00, '0033', NULL, NULL, 148, '2023-06-01', NULL, '经甲乙双方协商一致，本协议采用总价承包模式，含税总金额为17000.00元（大写：壹万柒仟元整），增值税税率为3%。', '2023-06-02', NULL, NULL, '2', '已核', 7, '2023-06-02', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410665507792', '四川省绵阳市三台县河湖保护中心三台县白蝉寺河等12条河流河道管理范围划定服务项目', 60000.00, '0192', NULL, NULL, 22, '2021-01-04', NULL, '4.1 合同总价为60000.00元（人民币大写：陆万元整）。\n4.2服务费支付方式：\n（1）合同签订后10个工作日内，甲方一次性向乙方支付合同总金额。 \n（2）乙方在十日内完成数据试入库工作。\n（3）甲方提供合格后的最终成果供检查入库。', '2021-01-08', NULL, NULL, '2', NULL, 7, '2021-01-06', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410666836402', '博州10万千瓦储热型光热配建90万千瓦新能源1:500地形图技术服务协议', 85910.00, '0129', NULL, NULL, 148, '2022-11-01', NULL, '本协议费用采用总价承接方式。', '2022-11-01', NULL, NULL, '2', '同意', 7, '2022-11-01', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410667020140', '黄河干流若尔盖段应急处置（抢险救灾）工程现场查勘、地质勘察及图纸编制项目技术服务协议', 220000.00, '0041', NULL, NULL, 148, '2022-07-01', NULL, '本协议含税价格为人民币 220000.00元（大写：人民币贰拾贰万元整），适用增值税税率 3 %。', '2022-07-01', NULL, NULL, '2', '同意', 7, '2022-07-01', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410674949079', '委托测试合作协议', 28600.00, '0114', NULL, NULL, 148, '2023-09-28', NULL, NULL, '2023-09-28', NULL, NULL, '2', '已核', 7, '2023-09-28', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410677386040', '2022年西安路街道办事处老旧小区院落改造项目测绘工作技术劳务协议', 100000.00, '0076', NULL, NULL, 148, '2022-04-13', NULL, '本协议费用采用总价承接方式。', '2022-04-14', NULL, NULL, '2', NULL, 7, '2022-04-14', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410679439336', '建设工程施工分包合同', 339300.00, '0170', NULL, NULL, 148, '2023-07-18', NULL, '本合同为单价合同，根据甲方提供估算工程量及双方约定相应单价，本合同估算金额为 339,300元（大写：人民币叁拾叁万玖仟叁佰圆整）。最终实际结算金额以实际结算金额为准。', '2023-07-20', NULL, NULL, '2', '同意', 7, '2023-07-20', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410680238227', '大唐玉曲河水电开发有限公司美玉、田妥光伏发电项目土壤电阻率测试合同', 7000.00, '0102', NULL, NULL, 148, '2023-08-02', NULL, '本合同费用按照实际工作单价法结算。', '2023-08-05', NULL, NULL, '2', '已核', 7, '2023-08-03', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410681057292', '新能源在役风电场2022年度沉降观测及水平度、垂直度检测劳务合作协议', 422451.00, '0155', NULL, NULL, 148, '2022-08-15', NULL, '本协议费用采用总价承包承接方式。', '2022-08-17', NULL, NULL, '2', '已核', 7, '2022-08-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410684369468', '雅砻江公司盐源3#、8#地块光伏地形图测绘项目技术服务协议', 132804.00, '0077', NULL, NULL, 148, '2022-06-20', NULL, '本协议含税价格为人民币132804.00元（大写：壹拾叁万贰仟捌佰零肆元整），适用增值税税率 3 %。本协议包括乙方提供本协议范围内所有技术服务所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。', '2022-06-21', NULL, NULL, '2', NULL, 7, '2022-06-21', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410688567421', '昭化区林权权籍补充调查项目技术服务协议', 184000.00, '0115', NULL, NULL, 148, '2022-12-09', NULL, '本协议费用采用单价承接方式，根据每个实际完成的分项来结算。', '2022-12-12', NULL, NULL, '2', '已核', 7, '2022-12-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410694078276', '甘孜抽水蓄能电站1:2000地形图测绘摄影数据采集和白玉抽水蓄能电站1:2000地形图测绘技术服务协议', 72220.00, '0126', NULL, NULL, 148, '2021-10-25', NULL, '经甲乙双方协商，本协议为总价承包计价模式，含税总价为72220.00元（大写：柒万贰仟贰佰贰拾元整）。其中甘孜抽水蓄能电站1:2000地形图测绘摄影数据采集费用为10000.00元（大写：壹万元整）；白玉抽水蓄能电站1:2000地形图测绘单价6000.00每km²合计金额为62220.00元（大写：陆万贰仟贰佰贰拾元整）。', '2021-10-27', NULL, NULL, '2', NULL, 7, '2021-10-27', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410694129208', '泸县“房地一体”宅基地使用权、集体建用地使用权及房屋所有权不动产登记项目', 20.00, '0122', '朱静', NULL, 22, '2020-11-02', NULL, '本项目单价为：每户贰拾元整（￥21.00元）；该单价为综合单价，已包含作业费、规费、利润、税金（税率6%）、管理费、安全生产投入及文明施工措施费等所有费用。在合同有效期内不予调整。', '2020-11-05', NULL, NULL, '2', NULL, 7, '2020-11-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410706109135', '昭化区林权权籍补充调查项目技术服务协议', 360000.00, '0073', NULL, NULL, 148, '2022-12-09', NULL, '本协议费用采用单价承接方式，根据每个实际完成的分项来结算。', '2022-12-09', NULL, NULL, '2', '已核', 7, '2022-12-09', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410706704949', '技术合作框架协议', 0.00, '0077', NULL, NULL, 148, '2022-09-01', NULL, '本协议为框架协议。项目结算单价参照甲方公司《项目委托管理费用结算要求及流程（暂行）》施行，按照两倍单价执行。若期间出现体系外特殊项目，由甲乙双方共同就单项目协商定价。', '2022-09-19', NULL, NULL, '2', NULL, 7, '2022-09-19', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410712526705', '粤北（河源、韶关、清远、肇庆）航飞影像获取及制作技术劳务合同', 1717543.11, '0043', NULL, NULL, 22, '2020-09-03', NULL, '方向乙方支付的技术劳务报酬总额为：人民币壹佰柒拾壹万柒仟伍佰肆拾叁元壹角壹分（大写），￥1717543.11（小写），其中包含增值税额（税率1%）：人民币壹万柒仟零伍元叁角捌分（大写），￥17005.38（小写）。该金额已包括乙方完成技术劳务工作所需的全部费用和报酬。', '2020-09-05', NULL, NULL, '2', NULL, 7, '2020-09-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410716199418', '邻水县8条县级河流岸线划定项目1:2000地形图测绘', 24430.00, '0163', '高丹', '18986260379', 22, '2020-06-01', NULL, '经双方友好协商，本合同金额（含税，税率：3%）为: &yen;24430元（大写: 人民币贰万肆仟肆佰叁拾元整）。\n以上费用包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费。', '2020-11-02', NULL, NULL, '2', NULL, 7, '2020-06-03', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410720797331', '平昌2023C20、屏山2023C21、洪雅2023C09测绘项目技术服务协议', 135230.00, '0088', NULL, NULL, 148, '2023-05-29', NULL, '经甲乙双方协商一致，本协议采用总价承包模式，含税总金额为135230.00元（大写：拾叁万伍仟贰佰叁拾元整），增值税税率为1%。', '2023-05-30', NULL, NULL, '2', '项目管理部需要对委外单价制定一个标准，类似于内部结算标准，以免各项目委外单价忽高忽低', 7, '2023-05-30', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410725031307', '邻水县重点区域自然资源统一确权登记服务项目劳务协议', 900000.00, '0072', NULL, NULL, 148, '2021-10-09', NULL, '经甲乙双方友好协商，本协议为含税总价人民币为：90.00万元整（大写：玖拾万元整），其中增值税率为1%，履约风险保证金10%（9.00万元，大写：玖万元整）。本项目劳务费用，除测绘产品质量检验机构检验费、专家费由甲方承担外，其它所有费用均由乙方承担，包括完成本项目所涉及人员劳务、差旅、设备投入、交通费、利润、保险、风险、税金、招标代理服务费、、会务费以及配合国家、省、市自然资源确权等的一切费用。', '2021-10-11', NULL, NULL, '2', NULL, 7, '2021-10-11', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410725228709', '四川中水成勘院测绘工程有限责任公司工程勘察技术咨询服务合同', 2306411.00, '0155', '王羿磊', NULL, 22, '2020-11-02', NULL, '本合同为单价承包合同，暂定含税总费用：2306411 元（大写：贰佰叁拾万零陆仟肆佰壹拾壹元）（其中增值税税率为 6 %），若因国家政策变化造成税率变化，按国家相关政策执行并调整税后价格。合同价款计算的依据为结算期间内甲乙双方确认的乙方人员实际投入人工日与本合同签约人工成本单价、人工日法综合计算系数（详见附件1）。', '2020-11-05', NULL, NULL, '2', NULL, 7, '2020-11-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410729048582', '遥感影像成果服务合同', 34800.00, '0061', NULL, NULL, 148, '2023-12-20', NULL, '合同总金额小写：34800.00元 ；大写：叁万肆仟捌佰元整 （已含税6%）', '2023-12-26', NULL, NULL, '2', '已核', 7, '2023-12-27', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410730589727', '简阳市平泉街道新桥村储备土地2016-70号地场砂石储量勘察工程勘察钻探劳务合同', 26515.00, '0012', NULL, NULL, 148, '2022-12-05', NULL, '勘察野外钻探总工作量最终以实际完成工作量结算', '2022-12-06', NULL, NULL, '2', '已核', 7, '2022-12-06', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410731765122', '田湾河外部供水地形图测绘、白河干流唐克镇段护岸工程建设用地勘测定界内业制图及报告编制等2个项目技术服', 40000.00, '0014', NULL, NULL, 148, '2023-03-03', NULL, '本协议费用采用总价承接方式。', '2023-03-03', NULL, NULL, '2', '已核', 7, '2023-03-03', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410736733011', '倾斜摄影系统采购设备采购合同', 132500.00, '0009', NULL, NULL, 22, '2020-09-09', NULL, '合同签订后，甲方在10个工作日内支付乙方合同金额的50%（￥ 66250.00元），设备经甲方测试合格后5个月内，支付剩余50%的费用，即：￥ 66250.00元；每次支付前乙方需出具等额的增值税专用发票给甲方。', '2020-09-14', NULL, NULL, '2', NULL, 7, '2020-09-14', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410737691158', '泸县2021年度国土变更调查项目技术服务协议', 850000.00, '0089', NULL, NULL, 148, '2022-01-05', NULL, '经甲乙双方友好协商，本协议为含税价人民币：850000.00元整（大写：捌拾伍万元整），其中增值税率为1%。本项目劳务费用包括完成本项目所涉及人员劳务、差旅、设备投入、交通费、利润、保险、风险、税金、会务费以及配合国家、省、市2021年度变更调查工作等的一切费用。', '2022-01-10', NULL, NULL, '2', NULL, 7, '2022-01-10', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410740519963', '乳源瑶族自治县2022年度国土变更调查项目劳务合作协议', 480000.00, '0070', NULL, NULL, 148, '2023-12-12', NULL, '经双方协商一致，本合同采用单价承接模式，适用增值税税率1 %，合同预计金额为480000.00元（人民币肆拾捌万元整），合同最终金额根据单价按实际工作量结算支付。', '2023-12-12', NULL, NULL, '2', '已核', 7, '2023-12-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410741372933', '得荣抽水蓄能电站航飞数据采集技术服务协议', 112500.00, '0054', NULL, NULL, 148, '2023-03-27', NULL, '本协议费用采用总价承接方式。', '2023-03-27', NULL, NULL, '2', '已核', 7, '2023-03-27', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410745467018', '广元市利州区河湖岸线划定服务单位（南河、清江河、白龙河）河道管理范围划定服务测绘合同', 15000.00, '0192', NULL, NULL, 22, '2020-06-15', NULL, NULL, '2020-06-29', NULL, NULL, '2', NULL, 7, '2020-06-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410746401754', '崇州抽水蓄能电站航飞数据采集', 68600.00, '0054', NULL, NULL, 148, '2023-01-16', NULL, '本协议费用采用总价承接方式。', '2023-01-16', NULL, NULL, '2', '已核', 7, '2023-01-16', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410751840845', '邻水县农村集体土地大比例尺图实测和确权登记发证项目劳务协议', 206500.00, '0104', '吴伟', NULL, 22, '2021-08-27', NULL, '经甲乙双方友好协商，本协议为含税总价人民币为：206500元整（大写：贰拾万零陆仟伍佰元整），其中增值税率为6%，结算金额根据实际完成宗地量进行结算。\n本项目单价为：每宗地伍拾玖元整（￥59.00元）；该单价为综合单价，已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费，在合同有效期内不予调整。', '2021-08-31', NULL, NULL, '2', NULL, 7, '2021-08-30', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410753525171', '黄河干流若尔盖段应急处置项目1:500原始水下地形测量技术服务协议', 30000.00, '0118', NULL, NULL, 148, '2022-03-16', NULL, '本协议含税价格为人民币30000.00元（大写：叁万元整），适用增值税税率为6%。本协议包括乙方提供本协议范围内所有技术服务所需的全部费用（包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用）。', '2022-05-10', NULL, NULL, '2', NULL, 7, '2022-05-10', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410755664346', '鲁格2023C97、ZDN12号2023C96、ZDN2&3号2023C98、长河坝2023W37航飞数据采集技术服务协议', 440000.00, '0054', NULL, NULL, 148, '2024-01-16', NULL, '经甲乙双方协商一致，本协议采用总价承包模式，协议总金额为440000.00元（大写：肆拾肆万元整）。', '2024-01-16', NULL, NULL, '2', '同意', 7, '2024-01-16', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410760197810', '金沙江上游川藏段（西藏侧）河道管理范围划定服务项目遥感影像、DEM数据采购', 130000.00, '0051', NULL, NULL, 22, '2020-10-20', NULL, '本合同是总价合同。合同总价（含税）：&yen;130000.00元（壹拾叁万元整）。', '2020-10-30', NULL, NULL, '2', NULL, 7, '2020-10-23', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410765270457', '中国交建马来西亚东海岸铁路项目精测网复测工作劳务合同', 2865155.00, '0164', NULL, NULL, 148, '2024-05-21', NULL, '本合同为单价合同。', '2024-05-21', NULL, NULL, '2', '同意', 7, '2024-05-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410765593992', '大竹县城乡规划编制中心大竹县城区地下管网普查项目技术服务协议', 3694600.00, '0144', NULL, NULL, 148, '2021-10-11', NULL, '本协议为单价协议，单价为 6157.8 元/公里（大写：陆仟壹佰伍拾柒贰元捌角），大竹县城区地下管网普查工作量600公里，本项目技术服务协议费用暂定价369.46万元（大写：叁佰陆拾玖万肆仟陆佰元整）（含税，税率6%）。以上费用为协议包干价，如实际工作量大于本协议约定的工作量，费用为包干价，如实际工作量小于本协议约定的工作量，则以实际工作量结算。', '2021-10-13', NULL, NULL, '2', NULL, 7, '2021-10-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410766475690', '古蔺县河湖水域岸线管理范围划定项目（04包）测绘合同', 32500.00, '0192', '陈绍国', '13980859212', 22, '2021-09-02', NULL, '合同总价为32500.00（人民币大写：叁万贰仟伍佰元整）。\n各河流费用为：\n震东河：2500.00（人民币大写：贰仟伍佰元整）；\n同民河：5000.00（人民币大写：伍仟元整）；\n蟠龙河：5000.00（人民币大写：伍仟元整）；\n西门河：5000.00（人民币大写：伍仟元整）；\n宝沅河：5000.00（人民币大写：伍仟元整）；\n大寨河：5000.00（人民币大写：伍仟元整）；\n椒坪河：5000.00（人民币大写：伍仟元整）；', '2021-09-06', NULL, NULL, '2', NULL, 7, '2021-09-03', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410768904417', '技术合作框架协议', 0.00, '0077', NULL, NULL, 148, '2024-03-05', NULL, '项目结算单价参照甲方公司《项目委托费用结算标准及结算流程规定》施行。若期间出现体系外特殊项目，由甲乙双方共同就单项目协商定价。', '2024-03-05', NULL, NULL, '2', '同意', 7, '2024-03-05', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410772435682', '乳源县天然气管道及配套设施建设项目管网路由地形测绘、规划定桩测量、地下管线普查测绘项目', 220000.00, '0070', NULL, NULL, 148, '2023-08-14', NULL, '主合同已经收款30%，收款金额38.13万元。', '2023-08-14', NULL, NULL, '2', '同意', 7, '2023-08-14', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410776103430', '叶巴滩混蓄预可研阶段1:1000地形图航空摄影（激光飞行及影像获取）项目劳务协议', 80000.00, '0032', NULL, NULL, 148, '2021-09-16', NULL, '本协议为总价协议，项目协议总费用为：&yen;80000.00元，大写：人民币捌万元整。本劳务费用包括但不限于人工费、工本费、乙方工作人员交通食宿费、税费、利润及乙方为履行本协议支出的其他所有费用。', '2021-09-17', NULL, NULL, '2', NULL, 7, '2021-09-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410777374019', '林权档案电子化及存量数据整合建库采购项目技术服务协议', 1239336.00, '0172', NULL, NULL, 148, '2021-11-08', NULL, '本项目采用总价承包方式，中标总金额为1239336.00元（大写:人民币壹佰贰拾叁万玖仟叁佰叁拾陆元整）。', '2021-11-10', NULL, NULL, '2', NULL, 7, '2022-01-10', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410777457576', '天津华电宝坻黄庄12万千瓦、大白庄15万千瓦风电项目土地测绘技术服务协议', 1073757.00, '0185', NULL, NULL, 148, '2023-12-01', NULL, '本协议含税总价为人民币1073757.00元（大写人民币：壹佰零柒万叁仟柒佰伍拾柒元整），适用增值税税率6%。（本协议总价中，扣除了天津的差旅费用2723元）', '2023-12-04', NULL, NULL, '2', '已核', 7, '2023-12-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410777634674', '苍溪抽水蓄能电站规划阶段工程地质勘察（钻孔测试）合同', 25600.00, '0102', NULL, NULL, 148, '2023-06-22', NULL, '本合同费用按照实际工作单价法结算。', '2023-06-25', NULL, NULL, '2', '已核', 7, '2023-06-23', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410778118960', '邻水县农村集体土地大比例尺实测和确权登记发证项目技术服务合同', 100000.00, '0074', NULL, NULL, 22, '2020-10-17', NULL, '1、合同价款按工作量（单位“户”）计算，按照甲方要求完成工作内容的宗地，经甲方验收合格，每户按（含税）36.00元（大写：叁拾陆元整）结算。最终费用核算以乙方实际完成工作量（户数）并经甲方验收合格的工作量为准。\n2、预估合同总价填写为100000元（大写：壹拾万元整）。', '2020-10-20', NULL, NULL, '2', NULL, 7, '2020-10-19', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410784509528', '泸县“房地一体”宅基地使用权、集体建用地使用权及房屋所有权不动产登记项目技术劳务协议书', 30.00, '0130', NULL, NULL, 22, '2021-04-19', NULL, '本项目单价为：每户叁拾元整（￥30.00元）；该单价为综合单价，已包含作业费、规费、利润、税金（税率6%）、管理费、安全生产投入及文明施工措施费等所有费用。在合同有效期内不予调整。', '2021-04-21', NULL, NULL, '2', NULL, 7, '2021-04-21', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410785217830', '西藏水电项目内业成图技术服务协议', 226864.00, '0027', NULL, NULL, 148, '2022-06-09', NULL, '本协议含税价格为人民币 226864.00元（大写：贰拾贰万陆仟捌佰陆拾肆元整），适用增值税税率 6 %。本协议包括乙方提供本协议范围内所有技术服务所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。', '2022-06-10', NULL, NULL, '2', NULL, 7, '2022-06-10', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410790643629', '佛山市季华路西延线工程（南海丹灶段）项目测量工程劳务合作协议', 743406.00, '0040', NULL, NULL, 148, '2022-08-11', NULL, '本协议费用采用按工作量结算承接方式。上述分包合同金额为预估金额。', '2022-08-12', NULL, NULL, '2', '同意', 7, '2022-08-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410791104846', '泸定2023C45项目劳务合作协议', 11000.00, '0109', NULL, NULL, 148, '2024-03-19', NULL, '本协议含税总价为人民币11000.00元（大写人民币：壹万壹仟元整），适用增值税率6%。', '2024-03-20', NULL, NULL, '2', '合同中应包含主要工作内容、面积、单价等', 7, '2024-03-20', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410793778087', '三圣街道办事处拆迁航拍、测绘服务项目技术服务协议', 0.00, '0076', NULL, NULL, 148, '2024-03-12', NULL, '本协议为单价合同，适用增值税税率6%。', '2024-03-13', NULL, NULL, '2', '已核', 7, '2024-03-13', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410794810897', '成都市成华区地下管线普查更新探测服务（第2包）技术服务协议', 6810000.00, '0149', NULL, NULL, 148, '2021-10-15', NULL, '本协议为单价协议，全野外探测单价为 3311 元/公里（大写：叁仟叁佰壹拾壹元），内外业结合核实探测单价为 2680 元/公里（大写: 贰仟陆佰捌拾元整），根据项目范围内已有管线资料情况统计，本项目全野外探测管线约1331.78公里，内外业结合核实探测管线约895.85公里，本项目技术服务协议费用暂定价681万元（大写：陆佰捌拾壹万元整）（含税，税率6%）。本项目不能超过预算价801.00万元（大写：捌佰零壹万元整）。', '2021-10-15', NULL, NULL, '2', NULL, 7, '2021-10-15', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410798634855', '简阳放生坝片区砂石储量勘察工程勘察钻探劳务合同', 50400.00, '0012', NULL, NULL, 148, '2022-12-05', NULL, '勘察野外钻探总工作量最终以实际完成工作量结算', '2022-12-06', NULL, NULL, '2', '已核', 7, '2022-12-06', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410801345841', '昭化区林权权籍补充调查项目技术服务协议', 450000.00, '0106', NULL, NULL, 148, '2023-06-19', NULL, '本协议费用采用单价承接方式。合同金额预计为45万左右。本协议包含数据汇交且含税单价为2.7元/宗，若后续不需汇交则含税单价为2.5/宗，适用增值税税率 3 %。', '2023-06-19', NULL, NULL, '2', '已核', 7, '2023-06-19', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410802869179', '京山市新型基础测绘体系建设项目（八标段）技术服务协议', 1390000.00, '0165', NULL, NULL, 148, '2023-04-13', NULL, '本协议费用采用 总价 承接方式。', '2023-04-13', NULL, NULL, '2', '已核', 7, '2023-04-13', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410806708595', '雅安市名山区内河流河道管理范围划界项目技术劳务合同书', 1109250.00, '0136', NULL, NULL, 22, '2020-09-17', NULL, '本项目技术劳务费按照固定单价7500元/公里进行计算，暂定公里数为147.9km，暂定总价（含税，税率6%）为人民币 1109250.00 元（大写：壹佰壹拾万零玖仟贰佰伍拾元整 ）。最终价格按照实际公里数进行结算。', '2020-09-21', NULL, NULL, '2', NULL, 7, '2020-09-21', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410808898422', '山西左权箕山抽水蓄能电站1:2000地形图测绘技术服务协议', 165040.00, '0129', NULL, NULL, 148, '2022-06-20', NULL, '经甲乙双方协商一致，本合同采用单价承包模式，合同预估总金额为165,040.00元（大写：拾陆万伍仟零肆拾元整）。', '2022-06-21', NULL, NULL, '2', '同意', 7, '2022-06-21', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410810969708', '成彭快速路航空摄影技术服务劳务协议', 45000.00, '0142', '舒利', '18583968336', 22, '2021-07-08', NULL, '1、协议价款\n项 目 位 置：彭州市\n项目作业距离：带状30公里\n项 目 单 价：&yen;1500元/公里\n项 目 总 价：&yen;45000元，大写：人民币肆万伍仟元整。（项目总价是乙方响应本项目要求的全部单次工作内容的价格体现，包括乙方完成本项目所需支出的一切费用及其响应文件中所给与的一切附加服务）。', '2021-07-09', NULL, NULL, '2', NULL, 7, '2021-07-09', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410813391378', '达州绕城高速公路测绘项目技术劳务协议', 482892.75, '0077', NULL, NULL, 148, '2021-07-15', NULL, '合同预算金额为482892.75。该项目为单价协议，工作量以实际工作量据实结算。', '2021-07-19', NULL, NULL, '2', NULL, 7, '2021-07-19', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410816036830', '《南江农房登记权籍调查及测绘项目合同书》解除协议', 100000.00, '0038', NULL, NULL, 22, '2020-09-21', NULL, '1、双方一致确认乙方已经于2020年7月15日退场；原合同于乙方退场时解除。\n2、截止2020年1月19日止，甲方向乙方支付测绘费共计70000.00元。\n3、截止2020年8月20日止，乙方已制作并应当向甲方交付的工作成果及资料有：6886户的地籍图、汇总信息表、部分房屋照片。\n4、乙方再次对自己所有成果进行检查、核实、改正，并于2020年9月25日前将所有改正后的资料交付甲方，甲方将对改正后的资料进行逐户核查并整改，且于2020年9月25日后将不再接收乙方资料。', '2020-10-16', NULL, NULL, '2', NULL, 7, '2020-10-15', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410816118054', '南桠2022C39、芦山2022C24、石棉2022C47、孟底沟2023C100测绘项目技术服务协议', 79600.00, '0124', NULL, NULL, 148, '2024-01-09', NULL, '本协议含税总价为人民币79600.00元（大写人民币：柒万玖仟陆佰元整），适用增值税税率1%。', '2024-01-09', NULL, NULL, '2', '已核', 7, '2024-01-09', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410816389510', '重庆城际快轨可研项目1:2000地形图测绘技术服务协议', 194700.00, '0087', NULL, NULL, 148, '2022-03-01', NULL, '经甲乙双方协商，本协议为单价协议，单价为5500元，按已实际完成工作量据实结算。', '2022-03-02', NULL, NULL, '2', '已核', 7, '2022-03-02', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410818159461', '溪洛渡施工区1：1000比例尺航测成图技术劳务合同', 120000.00, '0014', NULL, NULL, 22, '2020-12-01', NULL, '经甲乙双方协商，本项目技术劳务费采用总价承包的方式计价。合同含税总价（税率1%）为&yen;120000.00（大写：人民币壹拾贰万元整）。该费用包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费。在合同有效期内不予调整。发生合同规定以外的工作时费用另计。', '2020-12-07', NULL, NULL, '2', NULL, 7, '2020-12-03', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410818765338', '大邑县农村乱占耕地建房问题摸排劳务协议协议', 521850.00, '0086', NULL, NULL, 148, '2023-01-09', NULL, '本协议费用采用 总价承接方式。', '2023-01-10', NULL, NULL, '2', '已核', 7, '2023-01-10', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410820859204', '泸县2021年耕地“进出平衡”目标考核整改专项工作项目劳务合作协议', 390500.00, '0089', NULL, NULL, 148, '2023-08-04', NULL, '本合同为单价合同，按单价（66元/个）乘以实际省级核查通过图斑数据实结算，合同总金额不超过39.05万元。', '2023-08-04', NULL, NULL, '2', '同意', 7, '2023-08-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410824937078', '会理县“房地一体”农村宅基地和集体建设用地确权登记发证项目采购合同（第三包）', 5114608.40, '0148', NULL, NULL, 22, '2020-09-10', NULL, '本项目实行单价199.01元(大写：壹佰玖拾玖元零壹分)×实际测绘户数(预估为25700户)=实际结算总金额的方式，暂定合同总金额为: 5114608.4元（大写： 人民币伍佰壹拾壹万肆仟陆佰零捌元肆角 ）。', '2020-09-21', NULL, NULL, '2', NULL, 7, '2020-09-11', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410826503663', '《邻水县农村集体土地大比例尺图实测和确权登记发证项目包二段合同书》解除协议', 400000.00, '0084', '赵金贤', NULL, 22, '2020-08-21', NULL, NULL, '2020-09-22', NULL, NULL, '2', NULL, 7, '2020-08-25', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410826589158', '泸县2022年度国土变更调查及日常变更工作项目劳务合作协议', 58740.00, '0036', NULL, NULL, 148, '2023-01-11', NULL, '本协议费用采用 总价 承接方式。', '2023-01-12', NULL, NULL, '2', '已核', 7, '2023-01-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410827917551', '泸县自然资源（九曲河）确权登记项目劳务协议书', 70000.00, '0089', '钟一兵', NULL, 22, '2020-11-16', NULL, '经双方友好协商，本劳务协议书总价款为人民币大写：柒万元整，即RMB￥70000.00元。', '2021-01-19', NULL, NULL, '2', NULL, 7, '2021-01-18', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410829000542', '彭州市1：500系列数字测绘产品生产服务项目（第4包）技术劳务协议', 4287200.00, '0100', NULL, NULL, 148, '2021-09-18', NULL, '本项目合同暂定总价为本包件的预算金额&yen;4660000.00元（大写：肆佰陆拾陆万元整）含税，税率6%。如合同结算总金额不超过本包件的预算金额，按实际工作量进行结算；如合同结算总金额超出本包件的预算金额，则按照预算金额结算。其中甲方管理费金额为总金额的8%，其余为乙方的劳务费为总金额的92%。本劳务费用包括但不限于人工费、工本费、测绘费、乙方工作人员交通食宿费、税费、利润及乙方为履行本协议支出的其他所有费用。除本协议另有明确约定之外，甲方不再就本协议向乙方另行支付其他任何费用。', '2021-09-22', NULL, NULL, '2', NULL, 7, '2021-09-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410830963895', '罗江县房地一体1:500地形图制图技术服务合同', 320000.00, '0143', '杜凤', NULL, 22, '2020-04-03', NULL, NULL, '2020-04-10', NULL, NULL, '2', NULL, 7, '2020-04-07', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410832673854', '重庆轨道交通4号线西延伸段（一标段）土建2标、土建5标出入段线第三方监测项目劳务协作协议', 500000.00, '0188', NULL, NULL, 148, '2023-08-25', NULL, '本合同为预估总价合同，合同预估总价为人民币：50.0万元（大写：伍拾万元整），最终费用由甲、乙双方友好商定。', '2023-08-29', NULL, NULL, '2', '已核', 7, '2023-08-29', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410839729224', '雅砻江二滩水库泥沙断面测量项目、大唐观音岩水电站2022年度变形监测控制网复测及坝前淤积和坝后冲刷测量项', 40000.00, '0067', NULL, NULL, 148, '2022-12-26', NULL, NULL, '2022-12-26', NULL, NULL, '2', '已阅核，同意办理', 11, '2022-12-26', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410840293582', '泸县“房地一体”宅基地使用权、集体建用地使用权及房屋所有权不动产登记项目技术劳务协议书', 30.00, '0159', NULL, NULL, 22, '2021-04-19', NULL, '本项目单价为：每户叁拾元整（￥30.00元）；该单价为综合单价，已包含作业费、规费、利润、税金（税率6%）、管理费、安全生产投入及文明施工措施费等所有费用。在合同有效期内不予调整。', '2021-04-21', NULL, NULL, '2', NULL, 7, '2021-04-21', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410840743793', '波罗水电站（白玉县）农村集中安置点、集镇和污水处理厂迁复建初拟选址测绘项目技术服务协议', 500062.05, '0077', NULL, NULL, 148, '2021-10-20', NULL, '该项目为单价协议，工作量以实际工作量据实结算。预算金额为500062.05。', '2021-10-22', NULL, NULL, '2', NULL, 7, '2021-10-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410845019500', '都江堰市林权和土地承包经营权数据整合建库项目技术服务协议', 1543044.00, '0134', NULL, NULL, 148, '2023-01-06', NULL, '本协议费用采用总价承接方式。', '2023-01-06', NULL, NULL, '2', '已核', 7, '2023-01-06', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410852377262', '万达地理信息系统 V5.0软件销售合同（巴南区一品街道1:500电子地图地理信息项目）', 112755.00, '0190', NULL, NULL, 22, '2020-08-11', NULL, NULL, '2020-09-08', NULL, NULL, '2', NULL, 7, '2020-09-08', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410852733210', '眉山东部新城起步区1︰500地形图测绘服务采购项目（包一）测绘成果质量检验协议', 120000.00, '0194', NULL, NULL, 22, '2021-04-06', NULL, '四、检验经费 \n1、检验经费总额为：￥120，000 元(大写：人民币壹拾贰万元整)； \n2、合同签订后 10 个工作日内，甲方分别向乙方支付检验经费：￥60，000 元 (大写：人民币陆万元整)，向丙方支付检验数据采集协作经费：￥60，000 元(大写：人民币陆万元整)。 \n3、检验发现重大质量问题需要整改后二次提交检验的，检验费用另行协商。 \n五、检验完成时间 \n乙方在接收完整检验资料后 5 个工作日内安排检验工作，并在完成实地检验工作后 15 个工作日内提交检验报告。', '2021-04-08', NULL, NULL, '2', NULL, 7, '2021-04-09', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410858613729', '拉萨2023W13、ML2023C41测绘项目技术服务协议', 310000.00, '0088', NULL, NULL, 148, '2023-08-04', NULL, '本协议含税总价为人民币310000.00元（大写人民币：叁拾壹万元整），适用增值税税率1%。', '2023-08-04', NULL, NULL, '2', '已核', 7, '2023-08-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410865523040', '成都高新技术产业开发区西区地下管线普查成果更新服务探测协作委托协议', 1499879.40, '0095', NULL, NULL, 148, '2021-12-06', NULL, '本协议价款总价（含税）为 1499879.40元，（大写：壹佰肆拾玖万玖仟捌佰柒拾玖元肆角）。（超过此暂定价款需签订补充协议）', '2021-12-13', NULL, NULL, '2', NULL, 7, '2021-12-06', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410866466048', '高分立体卫片、单片存档数据采购技术服务合同', 329608.00, '0003', '王大伟', NULL, 22, '2020-09-22', NULL, '1．本合同服务费用总金额为人民币小写：￥329608.00元；大写：人民币叁拾贰万玖仟陆佰零捌元整，具体见本合同第一部分的约定。\n2．支付方式：\n（1）在本合同生效之日起7个工作日内，甲方一次性向乙方支付项目全部款项，小写：￥329608.00元；大写：人民币叁拾贰万玖仟陆佰零捌元整；\n（2）乙方给甲方提供对应金额的增值税专用发票。', '2020-09-28', NULL, NULL, '2', NULL, 7, '2020-09-25', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410868131217', '石棉县流域面积1000km²以上河流河道管理范围划定服务采购项目（田湾河第二标段）测绘服务', 5000.00, '0192', NULL, NULL, 22, '2020-06-15', NULL, NULL, '2020-07-14', NULL, NULL, '2', NULL, 7, '2020-06-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410869058215', '卡基娃水电站升压站1:500地形图测绘工作技术劳务协议', 25000.00, '0057', NULL, NULL, 148, '2021-05-13', NULL, '本协议采用总价承包计价模式,，协议含税总金额为25000.00元（大写：贰万伍仟元整），本协议的价格在协议有效期内不予调整。发生协议规定以外的工作时费用另计。以上已包含完成协议所有工作的作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费。', '2021-05-20', NULL, NULL, '2', NULL, 7, '2021-05-14', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410873932126', '邻水县农村集体土地大比例尺图实测和确权发证项目软件采购合同', 48000.00, '0108', '朱静', NULL, 22, '2020-10-13', NULL, NULL, '2020-10-19', NULL, NULL, '2', NULL, 7, '2020-10-16', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410876283899', '永善公路1:2000激光数据处理及地形图制图技术服务协议', 57992.00, '0088', NULL, NULL, 148, '2022-03-24', NULL, '本协议含税价格为人民币 57992元（大写：伍万柒仟玖佰玖拾贰元整），适用增值税税率 1 %。本协议包括乙方提供本协议范围内所有技术服务所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。', '2022-03-25', NULL, NULL, '2', '已阅', 7, '2022-03-25', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410877263954', '泸县“房地一体”宅基地使用权、集体建设用地使用权及房屋所有权不动产登记项目（第七包）内外业核查整改工', 213755.00, '0036', NULL, NULL, 148, '2023-01-10', NULL, '本协议费用采用 总价 承接方式。', '2023-01-12', NULL, NULL, '2', '已核', 7, '2023-01-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410879854740', '重庆市第三方监控测量项目测绘协作协议', 0.00, '0024', NULL, NULL, 148, '2023-05-04', NULL, '本合同为单价合同，参与协作人员按12000元/人/月进行结算。', '2023-05-04', NULL, NULL, '2', '已核', 7, '2023-05-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410883627813', '万达地理信息系统 V5.0软件销售合同书(横五支路北段及配套工程排水管网内窥试验检测)', 38376.00, '0190', '魏学渊、王羽', NULL, 22, '2021-08-16', NULL, '订制软件产品用于横五支路北段及配套工程排水管网内窥试验检测项目，合同总价￥38376.00元人民币，大写金额为：人民币：叁万捌仟叁佰柒拾陆元整 。', '2021-08-31', NULL, NULL, '2', NULL, 7, '2021-08-18', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410884936325', '仁寿县清水镇东风渠1：500地形图测绘、天府西河1:1000地形图测绘、田湾河河湖划界项目1:2000测图、沱江河湖划界2000测图、永善支线进场道路地形图补图技术服务合同', 44065.00, '0163', NULL, NULL, 22, '2020-04-02', NULL, NULL, '2020-04-06', NULL, NULL, '2', '同意', 7, '2020-04-03', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410885837479', '山西沁水抽水蓄能电站航飞采集技术服务协议', 40000.00, '0054', NULL, NULL, 148, '2022-09-21', NULL, '本协议费用采用总价承接方式。', '2022-09-26', NULL, NULL, '2', '同意', 7, '2022-09-26', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410887590986', '卫星数据合同', 364820.00, '0039', NULL, NULL, 148, '2023-03-01', NULL, NULL, '2023-03-02', NULL, NULL, '2', '同意', 11, '2023-03-09', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410889243824', '青羊区建管并举文旅线路风貌提升改造项目测绘服务劳务合作协议', 120000.00, '0076', NULL, NULL, 148, '2023-03-20', NULL, '经双方协商一致，本合同采用固定总价承接模式，合同总价为大写：壹拾贰万元整，小写：120000.00元，适用增值税税率6%。', '2023-03-22', NULL, NULL, '2', '同意', 7, '2023-03-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410889904498', '2021年度全国国土变更调查成果国家级核查及监理包10技术服务协议', 1093019.00, '0179', NULL, NULL, 148, '2022-05-25', NULL, '经甲乙双方友好协商，本协议为含税总价人民币为：1112795.00元（大写：壹佰壹拾壹万贰仟柒佰玖拾伍元整），其中增值税率为6%。本协议扣除甲方代交的中标服务费16576.00元（大写：壹万陆仟伍佰柒拾陆元整）和标书购置费3200.00元（大写：叁仟贰佰元整），最终协议总价为1093019.00元（大写：壹佰零玖万叁仟零壹拾玖元整）。', '2022-05-27', NULL, NULL, '2', NULL, 7, '2022-05-27', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410892692941', '两河口水电站工程库区影像采集', 390000.00, '0142', NULL, NULL, 22, '2020-09-25', NULL, '第四条合同金额：本合同采用单价计价模式，影像采集单价（含税）为3000.00元，合同预估总金额（含税）为390000.00元。（大写：叁拾玖万元整）“合同工程量清单价格表”中没有规定的收费项目，除本合同另有说明，均视为乙方已将该费用摊入工程量清单单价中，甲方不再另行支付任何费用。', '2020-10-10', NULL, NULL, '2', NULL, 7, '2020-09-30', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410894401859', '桂城街道夏南一与平西（兴仁村、蓬涌村、马根村、格涌村）旧村改造项目基础数据初查阶段技术核查劳务合作协议', 135986.00, '0040', NULL, NULL, 148, '2022-08-11', NULL, '本协议含税价格为人民币135986.00元（大写：壹拾叁万伍仟玖佰捌拾陆元整），适用增值税税率 3 %。', '2022-08-15', NULL, NULL, '2', '同意', 7, '2022-08-15', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410895990430', '西藏朋曲河湖划界项目界桩测设劳务协议', 290000.00, '0020', NULL, NULL, 148, '2021-10-11', NULL, '经甲乙双方协商，西藏朋曲河湖划界项目界桩测设项目，本协议采用总价承包计价模式。协议含税总金额为290000.00元（大写：贰拾玖万元整），本协议的价格在协议有效期内不予调整。发生协议规定以外的工作时费用另计。以上已包含完成协议所有工作的作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用。', '2021-10-13', NULL, NULL, '2', NULL, 7, '2021-10-13', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410896260153', '芦山县河道治理工程地形图测绘项目技术服务协议', 29390.00, '0077', NULL, NULL, 148, '2022-04-08', NULL, '本协议费用采用总价承接方式。', '2022-04-08', NULL, NULL, '2', NULL, 7, '2022-04-08', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410899037204', '河北邢台抽水蓄能电站航飞采集技术服务协议', 47000.00, '0052', NULL, NULL, 148, '2022-10-12', NULL, '本协议费用采用总价承接方式。', '2022-10-13', NULL, NULL, '2', '已核', 7, '2022-10-13', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410906441274', '西藏林芝市直升飞机航测航空测绘服务合同', 1200000.00, '0065', '胡家玲', NULL, 22, '2021-03-18', NULL, '1、使用 AS350型直升机壹架搭载一套华测AS-1300HL等航测设备执行此次飞行任务。\n2、作业飞行费为人民币壹佰贰拾万元整（￥1200000.00）包含空域申请、运输、场站费、飞行、安全、税金等全部费用。若因甲方设备故障要求补飞重飞，则超出保底40小时部分按照30000元/小时计算。（不足 30 分钟按半小时计算，超过 30 分钟按 1 小时计算）。若因乙方飞行偏离设计航线造成采集数据达不到技术指标，按要求重飞的飞行时间不计入保底时间，不计算超时费用。以上费用已包含作业费、规费、税金、利润、管理费、安全生产投入及文明施工措施费等所有费用。', '2021-03-30', NULL, NULL, '2', NULL, 7, '2021-03-29', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410908271013', '乳源县天然气管道及配套设施建设项目地下管线普查项目', 90000.00, '0001', NULL, NULL, 148, '2022-09-01', NULL, '经甲乙双方友好协商，本协议为含税总价人民币为： 90000.00元（大写：玖万元整）。', '2022-09-21', NULL, NULL, '2', NULL, 7, '2022-09-21', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410910860364', '草登2023C31、波罗2022C84、芦山2021C89、若尔盖2021W33测绘项目技术服务协议', 337159.00, '0013', NULL, NULL, 148, '2023-08-11', NULL, '本协议含税总价为人民币337159.00元（大写人民币：叁拾叁万柒仟壹佰伍拾玖元整），适用增值税税率6%。', '2023-08-11', NULL, NULL, '2', '已核，合同费用暂时不用支付，冲抵吐鲁番（不含）至和田段铁路测绘合同款项', 7, '2023-08-11', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410912630182', '铁路岩堆区域加固防护安全监测劳务合作协议', 1746899.00, '0059', NULL, NULL, 148, '2023-04-27', NULL, '本协议费用采用总价承接方式，适用增值税税率1%。', '2023-04-28', NULL, NULL, '2', '已核', 7, '2023-04-28', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410917537531', '重庆市万州1:2000DLG、DEM制作项目技术劳务合同', 110000.00, '0021', '赵静', NULL, 22, '2020-12-02', NULL, NULL, '2021-01-04', NULL, NULL, '2', NULL, 7, '2020-12-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410918470335', '成都高新区“实景三维成都”建设服务项目劳务合作协议', 5376428.00, '0030', NULL, NULL, 148, '2024-04-29', NULL, '本协议费用采用包干单价承接方式，包干单价按43710.8元/平方公里计费，预估工作量为123平方公里，预估总价为人民币5376428元', '2024-04-30', NULL, NULL, '2', '已核', 7, '2024-04-30', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410920451720', '西部沿海高速公路阳江南联络线（阳东至阳江港高速公路）工程项目地形图测绘劳务合作协议', 1212288.02, '0047', NULL, NULL, 148, '2023-01-06', NULL, '本协议费用采用单价承接方式。', '2023-01-06', NULL, NULL, '2', '已核', 7, '2023-01-06', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410924202036', '国能四川阿水电力开发有限公司绰斯甲水电站工程测量中心技术服务协议', 10320052.94, '0184', NULL, NULL, 148, '2022-04-15', NULL, '经双方友好协商，本协议适用增值税税率为3%，含税总价:10320052.94元（大写:人民币壹仟零叁拾贰万零伍拾贰元玖角肆分）。本协议为固定不变价格，包括乙方提供本协议所需的全部费用(包含完成工作内容所需的基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。以上费用不含项目后期变更费用。', '2022-04-20', NULL, NULL, '2', NULL, 7, '2022-04-20', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410924260529', '全站仪采购合同', 98000.00, '0133', NULL, NULL, 22, '2020-05-27', NULL, '全站仪主机壹年保修。', NULL, NULL, NULL, '2', NULL, 7, '2020-06-09', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410927459105', '配合测量项目技术服务协议', 179265.00, '0077', NULL, NULL, 148, '2022-05-25', NULL, '本协议含税价格为人民币179265元（大写：壹拾柒万玖仟贰佰陆拾伍元整）。本协议包括乙方提供本协议范围内所有技术服务所需的全部费用(包含完成工作内容所需的工程基本直接费、其他直接费、间接费、利润、其它摊入费和应缴纳的各种税金、保险、措施费等全部费用)。', '2022-05-27', NULL, NULL, '2', NULL, 7, '2022-05-27', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410933065606', '拉萨2023W13、查龙2023C91、汤坝2023C56测绘项目技术服务协议', 73471.00, '0088', NULL, NULL, 148, '2023-12-12', NULL, '本协议含税总价为人民币73471.00元（大写人民币：柒万叁仟肆佰柒拾壹元整），适用增值税税率1%。', '2023-12-12', NULL, NULL, '2', '已核', 7, '2023-12-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410933721371', '阳山县“房地一体”农村不动产登记发证工作服务项目（片区四）合同', 2505600.00, '0089', '钟一兵', NULL, 22, '2020-08-20', NULL, NULL, '2020-08-24', NULL, NULL, '2', NULL, 7, '2020-08-24', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410937824511', '大庆石油管理局职工家属区分离移交物业、供热系统维修改造工程测绘现状地形图（第五标段）技术服务合同', 242637.82, '0053', '李云志', NULL, 22, '2020-10-20', NULL, NULL, '2020-10-23', NULL, NULL, '2', NULL, 7, '2020-10-22', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410938762461', '汤坝2023C56测绘项目技术服务协议', 40000.00, '0088', NULL, NULL, 148, '2023-11-14', NULL, '本协议含税总价为人民币40000.00元（大写人民币：肆万元整），适用增值税税率1%。', '2023-11-14', NULL, NULL, '2', '已核', 7, '2023-11-14', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410939373629', '万达地理信息系统 V5.0软件销售合同（两江新区2020年新增消防设备项目）', 214700.00, '0190', '王羽', NULL, 22, '2020-08-11', NULL, NULL, '2020-08-17', NULL, NULL, '2', NULL, 7, '2020-08-14', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410940369844', '泸县“房地一体”宅基地使用权、集体建用地使用权及房屋所有权不动产登记项目', 30.00, '0048', '杨健新', '13984071383', 22, '2021-04-01', NULL, '本项目单价为：每户叁拾元整（￥30元）；该单价为综合单价，已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用。在合同有效期内不予调整。', '2021-04-05', NULL, NULL, '2', NULL, 7, '2021-04-02', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410942133881', '宁夏1:2000基础地理信息数据库及\"多库合一\"项目数字线划图（DLG）成果质量检验协议', 15763.00, '0062,0078', NULL, NULL, 22, '2020-08-03', NULL, NULL, '2020-08-10', NULL, NULL, '2', NULL, 7, '2020-08-07', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410943043700', '四川省绵阳市三台县河湖保护中心“三台县河道管理范围划定”测绘合同', 5000.00, '0192', '王智红', NULL, 22, '2020-11-16', NULL, '4.1 合同总价为5000.00元（人民币大写：伍仟元整）。\n各河流费用为：\n郪江：5000.00（人民币大写：伍仟元整）；', '2020-11-27', NULL, NULL, '2', NULL, 7, '2020-11-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410956330359', '盐源2023C46、官地2023C57航飞数据采集技术服务协议', 197600.00, '0054', NULL, NULL, 148, '2023-10-19', NULL, '本协议采用总价承包模式，协议总金额为197600.00元（大写：壹拾玖万柒仟陆百元整）。', '2023-10-20', NULL, NULL, '2', '已核', 7, '2023-10-20', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410961993633', '青川县重点区域自然资源权属调查（大熊猫国家公园）项目合同书', 240000.00, '0034', '王薇', NULL, 22, '2020-04-06', NULL, '乙方在签订合同前需缴纳履约保证金￥12300.00元整（大写：壹万贰仟叁佰元整），若乙方未按约缴纳履约保证金的，则甲、乙双方所签合同无效。履约保证金在成果经国家验收合格后10日内无息退还。若在履约过程中给甲方造成任何损失，甲方可在履约保证金中直接扣除。乙方的履约保证金尚不足以弥补其造成的损失的，甲方还可继续主张，并优先从乙方应得服务款项中扣除。', '2020-04-15', NULL, NULL, '2', NULL, 7, '2020-04-08', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410962736976', '大邑县鹤鸣镇航空摄影技术服务劳务协议', 20000.00, '0142', '舒利', '18583968336', 22, '2021-07-09', NULL, '1、协议价款\n项 目  位 置：大邑县鹤鸣镇\n项目作业面积：10平方公里\n项 目  单 价：&yen;2000.00元/平方公里\n项 目  总 价：&yen;20000.00元，大写：人民币贰万元整。', '2021-07-13', NULL, NULL, '2', NULL, 7, '2021-07-13', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410964956960', '西藏日喀则市定日县西巴霞曲河湖划界项目界桩测设劳务协议', 420000.00, '0020', NULL, NULL, 148, '2021-09-24', NULL, '本协议采用总价承包计价模式。协议含税总金额为￥420000.00元（大写：肆拾贰万元整），本协议的价格在协议有效期内不予调整。发生协议规定以外的工作时费用另计。以上已包含完成协议所有工作的作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用。', '2021-09-30', NULL, NULL, '2', '公司的主合同还未签订，付款方式需改动下，首付款太高，已经超过30%了，建议付款方式改成：乙方在进场后15个日历天（预计10月15日），甲方同时收到乙方开具等额增值税专用发票后5个工作日内支付乙方预付界桩制作费用100000.00元整（大写：壹拾万元整）；剩余费用在乙方完成界桩测量并通过甲方和业主验收后，在甲方收到相应合同款项及收到乙方开具的等额增值税专用发票后30个工作日内，甲方一次性向乙方支付本协议剩余费用。', 7, '2021-09-28', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410967274626', '泸县2022年度国土变更调查及日常变更工作项目劳务合作协议', 46720.00, '0135', NULL, NULL, 148, '2023-01-11', NULL, '本协议费用采用 总价 承接方式。', '2023-01-12', NULL, NULL, '2', '已核', 7, '2023-01-12', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410969677196', '确如多水电站料场及渣场地形图测量项目技术劳务协议', 36000.00, '0032', NULL, NULL, 148, '2021-12-01', NULL, '本协议为总价协议，项目协议总费用为：&yen;36000.00元，大写：人民币叁万陆仟元整。', '2021-12-02', NULL, NULL, '2', NULL, 7, '2021-12-02', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410981031276', '道孚县瓦依沟河、九龙县子耳河、三岩龙沟河道管理范围划定服务测绘合同', 15000.00, '0192', NULL, NULL, 22, '2020-08-04', NULL, NULL, '2020-08-04', NULL, NULL, '2', NULL, 7, '2020-08-06', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410981827228', '新建重庆至黔江铁路站前工程CQQJZQ-5标段精测网复测技术劳务合同', 2491110.00, '0096', '张念', NULL, 22, '2020-09-02', NULL, NULL, '2020-09-15', NULL, NULL, '2', NULL, 7, '2020-09-04', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410984570574', '红原县规模以下河流管理保护范围划界服务测绘合同', 94800.00, '0192', '陈绍国', '13980859212', 22, '2021-03-09', NULL, NULL, '2021-03-30', NULL, NULL, '2', NULL, 7, '2021-03-30', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410988302457', '邻水县农村集体土地大比例尺实测和确权登记发证项目技术服务合同', 0.00, '0074', NULL, NULL, 22, '2020-11-02', NULL, '合同价款按工作量（单位“户”）计算，按照甲方要求完成工作内容的宗地，经甲方验收合格，每户按（含税）36.00元（大写：叁拾陆元整）结算。最终费用核算以乙方实际完成工作量（户数）并经甲方验收合格的工作量为准。', '2020-11-10', NULL, NULL, '2', NULL, 7, '2020-11-05', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410991416601', '中山市第三次全国土地调查项目-包组三：监理服务', 413920.00, '0040', NULL, NULL, 148, '2022-10-27', NULL, '本协议费用采用总价承接方式。', '2022-10-27', NULL, NULL, '2', '同意', 7, '2022-10-27', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410992132661', '重庆市永川区侨立水务有限公司城市供水管线补勘补测项目技术服务协议', 92228.00, '0116', NULL, NULL, 148, '2020-11-15', NULL, '经甲乙双方友好协商，本协议为含税总价人民币为： 97028.00元（大写：玖万柒仟零贰拾捌元整），项目运行中甲方已支付项目检查费4800.00元整（大写：肆仟捌佰整），扣除检查费后为92228.00元（大写：玖万贰仟贰佰贰拾捌元整）', '2020-11-17', NULL, NULL, '2', NULL, 7, '2021-11-17', NULL, NULL, NULL);
INSERT INTO `cmc_sub_contract` VALUES ('1648881410997721939', '重庆第二机场机载激光点云处理及2D产品制作技术服务合同', 124165.00, '0177', NULL, NULL, 22, '2020-12-01', NULL, '7.2计费说明： \n经双方友好协商，本合同1:500激光处理及2D产品制作单价为2000元/平方公里，面积为38平方公里；1:1000激光处理及2D产品制作单价为1500元/平方公里，面积为32.11平方公里；合同总价款为: &yen;124165元，（大写:人民币壹拾贰万肆仟壹佰陆拾伍元整）；\n以上费用包干使用，即已包含作业费、规费、利润、税金、管理费、安全生产投入及文明施工措施费等所有费用费等所有费用。', '2020-12-07', NULL, NULL, '2', NULL, 7, '2020-12-02', NULL, NULL, NULL);

-- ----------------------------
-- 53、cmc项目合同表
-- ----------------------------
drop table if exists `cmc_project_contract`;
create table `cmc_project_contract`  (
  `project_id` 				char(19)  	not null 	comment '项目id',
  `contract_id` 			char(19)  	not null 	comment '合同id',
  primary key (`project_id`,`contract_id`)
) engine = innodb comment = 'cmc项目合同表';

-- ----------------------------
-- 初始化-项目合同表数据
-- ----------------------------
INSERT INTO `cmc_project_contract` VALUES ('1648881410480275457', '1648881410480275457');
INSERT INTO `cmc_project_contract` VALUES ('1648881410572550145', '1648881413114298369');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270402', '1648881410631270402');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270405', '1648881410631270405');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270406', '1648881410631270406');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270407', '1648881410631270407');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270412', '1648881410631270412');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270418', '1648881410631270418');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270419', '1648881410631270419');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270420', '1648881410631270420');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270421', '1648881410631270421');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270422', '1648881412170579969');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270428', '1648881412892000257');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270429', '1648881410631270429');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270430', '1648881410631270430');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270433', '1648881410631270433');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270441', '1648881410631270441');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270447', '1648881410631270447');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270454', '1648881413785387010');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270455', '1648881411298164738');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270456', '1648881418441064449');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270457', '1648881410631270457');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270458', '1648881413768609794');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270459', '1648881411268804610');
INSERT INTO `cmc_project_contract` VALUES ('1648881410631270464', '1648881410631270464');
INSERT INTO `cmc_project_contract` VALUES ('1648881410660630529', '1648881410660630529');
INSERT INTO `cmc_project_contract` VALUES ('1648881410694184962', '1648881410694184962');
INSERT INTO `cmc_project_contract` VALUES ('1648881410710962177', '1648881410710962177');
INSERT INTO `cmc_project_contract` VALUES ('1648881410727739393', '1648881410727739393');
INSERT INTO `cmc_project_contract` VALUES ('1648881410744516610', '1648881411499491378');
INSERT INTO `cmc_project_contract` VALUES ('1648881410790653953', '1648881410790653953');
INSERT INTO `cmc_project_contract` VALUES ('1648881410815819777', '1648881411612737537');
INSERT INTO `cmc_project_contract` VALUES ('1648881410832596993', '1648881410832596993');
INSERT INTO `cmc_project_contract` VALUES ('1648881410849374209', '1648881410849374209');
INSERT INTO `cmc_project_contract` VALUES ('1648881410878734337', '1648881410878734337');
INSERT INTO `cmc_project_contract` VALUES ('1648881410912288769', '1648881410912288769');
INSERT INTO `cmc_project_contract` VALUES ('1648881410929065985', '1648881410929065985');
INSERT INTO `cmc_project_contract` VALUES ('1648881410945843202', '1648881410945843202');
INSERT INTO `cmc_project_contract` VALUES ('1648881410962620417', '1648881410962620417');
INSERT INTO `cmc_project_contract` VALUES ('1648881410979397634', '1648881410979397634');
INSERT INTO `cmc_project_contract` VALUES ('1648881411000369153', '1648881411000369153');
INSERT INTO `cmc_project_contract` VALUES ('1648881411050700802', '1648881411050700802');
INSERT INTO `cmc_project_contract` VALUES ('1648881411067478017', '1648881411067478017');
INSERT INTO `cmc_project_contract` VALUES ('1648881411084255234', '1648881411050700802');
INSERT INTO `cmc_project_contract` VALUES ('1648881411105226753', '1648881411105226753');
INSERT INTO `cmc_project_contract` VALUES ('1648881411122003970', '1648881411122003970');
INSERT INTO `cmc_project_contract` VALUES ('1648881411138781186', '1648881411138781186');
INSERT INTO `cmc_project_contract` VALUES ('1648881411138781188', '1648881411138781188');
INSERT INTO `cmc_project_contract` VALUES ('1648881411138781190', '1648881411138781190');
INSERT INTO `cmc_project_contract` VALUES ('1648881411159752705', '1648881411159752705');
INSERT INTO `cmc_project_contract` VALUES ('1648881411201695745', '1648881411201695745');
INSERT INTO `cmc_project_contract` VALUES ('1648881411218472961', '1648881411218472961');
INSERT INTO `cmc_project_contract` VALUES ('1648881411235250178', '1648881411235250178');
INSERT INTO `cmc_project_contract` VALUES ('1648881411252027394', '1648881411252027394');
INSERT INTO `cmc_project_contract` VALUES ('1648881411268804610', '1648881411268804610');
INSERT INTO `cmc_project_contract` VALUES ('1648881411298164738', '1648881411298164738');
INSERT INTO `cmc_project_contract` VALUES ('1648881411319136258', '1648881413785387010');
INSERT INTO `cmc_project_contract` VALUES ('1648881411331719170', '1648881411331719170');
INSERT INTO `cmc_project_contract` VALUES ('1648881411348496386', '1648881413768609794');
INSERT INTO `cmc_project_contract` VALUES ('1648881411373662209', '1648881414095765505');
INSERT INTO `cmc_project_contract` VALUES ('1648881411419799553', '1648881410631270457');
INSERT INTO `cmc_project_contract` VALUES ('1648881411457548290', '1648881411457548290');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491330', '1648881411499491330');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491336', '1648881411499491336');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491337', '1648881411499491337');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491341', '1648881411499491341');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491344', '1648881411499491344');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491345', '1648881411499491345');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491347', '1648881411499491347');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491348', '1648881411499491348');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491349', '1648881411499491349');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491350', '1648881411499491350');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491351', '1648881411499491351');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491355', '1648881411499491355');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491359', '1648881411499491359');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491361', '1648881411499491361');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491363', '1648881411499491363');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491364', '1648881411499491364');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491369', '1648881411499491369');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491372', '1648881411499491372');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491373', '1648881411499491373');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491375', '1648881411499491375');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491376', '1648881411499491376');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491378', '1648881411499491378');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491379', '1648881411499491379');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491381', '1648881411499491381');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491382', '1648881411499491382');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491385', '1648881411499491385');
INSERT INTO `cmc_project_contract` VALUES ('1648881411499491386', '1648881411499491386');
INSERT INTO `cmc_project_contract` VALUES ('1648881411533045762', '1648881411612737537');
INSERT INTO `cmc_project_contract` VALUES ('1648881411562405890', '1648881411562405890');
INSERT INTO `cmc_project_contract` VALUES ('1648881411587571714', '1648881411587571714');
INSERT INTO `cmc_project_contract` VALUES ('1648881411612737537', '1648881411612737537');
INSERT INTO `cmc_project_contract` VALUES ('1648881411650486273', '1648881411650486273');
INSERT INTO `cmc_project_contract` VALUES ('1648881411751149569', '1648881411751149569');
INSERT INTO `cmc_project_contract` VALUES ('1648881411772121090', '1648881411772121090');
INSERT INTO `cmc_project_contract` VALUES ('1648881411788898306', '1648881411788898306');
INSERT INTO `cmc_project_contract` VALUES ('1648881411788898307', '1648881411788898307');
INSERT INTO `cmc_project_contract` VALUES ('1648881411809869825', '1648881411809869825');
INSERT INTO `cmc_project_contract` VALUES ('1648881411826647041', '1648881411826647041');
INSERT INTO `cmc_project_contract` VALUES ('1648881411847618561', '1648881411847618561');
INSERT INTO `cmc_project_contract` VALUES ('1648881411885367297', '1648881411885367297');
INSERT INTO `cmc_project_contract` VALUES ('1648881411927310338', '1648881411927310338');
INSERT INTO `cmc_project_contract` VALUES ('1648881411944087553', '1648881411944087553');
INSERT INTO `cmc_project_contract` VALUES ('1648881411986030594', '1648881411986030594');
INSERT INTO `cmc_project_contract` VALUES ('1648881412002807809', '1648881412002807809');
INSERT INTO `cmc_project_contract` VALUES ('1648881412040556545', '1648881412040556545');
INSERT INTO `cmc_project_contract` VALUES ('1648881412057333761', '1648881412057333761');
INSERT INTO `cmc_project_contract` VALUES ('1648881412074110977', '1648881412074110977');
INSERT INTO `cmc_project_contract` VALUES ('1648881412090888194', '1648881412090888194');
INSERT INTO `cmc_project_contract` VALUES ('1648881412107665410', '1648881414066405377');
INSERT INTO `cmc_project_contract` VALUES ('1648881412124442625', '1648881412124442625');
INSERT INTO `cmc_project_contract` VALUES ('1648881412153802753', '1648881412153802753');
INSERT INTO `cmc_project_contract` VALUES ('1648881412170579969', '1648881412170579969');
INSERT INTO `cmc_project_contract` VALUES ('1648881412204134402', '1648881412204134402');
INSERT INTO `cmc_project_contract` VALUES ('1648881412220911618', '1648881412220911618');
INSERT INTO `cmc_project_contract` VALUES ('1648881412271243265', '1648881412271243265');
INSERT INTO `cmc_project_contract` VALUES ('1648881412296409090', '1648881412296409090');
INSERT INTO `cmc_project_contract` VALUES ('1648881412346740737', '1648881412346740737');
INSERT INTO `cmc_project_contract` VALUES ('1648881412363517954', '1648881412363517954');
INSERT INTO `cmc_project_contract` VALUES ('1648881412422238210', '1648881412422238210');
INSERT INTO `cmc_project_contract` VALUES ('1648881412476764161', '1648881414951403522');
INSERT INTO `cmc_project_contract` VALUES ('1648881412514512898', '1648881412514512898');
INSERT INTO `cmc_project_contract` VALUES ('1648881412573233153', '1648881412573233153');
INSERT INTO `cmc_project_contract` VALUES ('1648881412594204674', '1648881412594204674');
INSERT INTO `cmc_project_contract` VALUES ('1648881412631953410', '1648881412631953410');
INSERT INTO `cmc_project_contract` VALUES ('1648881412682285058', '1648881414037045250');
INSERT INTO `cmc_project_contract` VALUES ('1648881412715839489', '1648881412124442625');
INSERT INTO `cmc_project_contract` VALUES ('1648881412736811010', '1648881412736811010');
INSERT INTO `cmc_project_contract` VALUES ('1648881412753588225', '1648881412753588225');
INSERT INTO `cmc_project_contract` VALUES ('1648881412774559745', '1648881415979008002');
INSERT INTO `cmc_project_contract` VALUES ('1648881412795531265', '1648881414951403522');
INSERT INTO `cmc_project_contract` VALUES ('1648881412812308481', '1648881412829085697');
INSERT INTO `cmc_project_contract` VALUES ('1648881412829085697', '1648881412829085697');
INSERT INTO `cmc_project_contract` VALUES ('1648881412875223041', '1648881412875223041');
INSERT INTO `cmc_project_contract` VALUES ('1648881412892000257', '1648881412892000257');
INSERT INTO `cmc_project_contract` VALUES ('1648881412929748993', '1648881412124442625');
INSERT INTO `cmc_project_contract` VALUES ('1648881412946526209', '1648881412946526209');
INSERT INTO `cmc_project_contract` VALUES ('1648881412984274945', '1648881412984274945');
INSERT INTO `cmc_project_contract` VALUES ('1648881413009440769', '1648881413009440769');
INSERT INTO `cmc_project_contract` VALUES ('1648881413030412290', '1648881413030412290');
INSERT INTO `cmc_project_contract` VALUES ('1648881413072355329', '1648881413072355329');
INSERT INTO `cmc_project_contract` VALUES ('1648881413093326850', '1648881413093326850');
INSERT INTO `cmc_project_contract` VALUES ('1648881413114298369', '1648881413114298369');
INSERT INTO `cmc_project_contract` VALUES ('1648881413131075586', '1648881413131075586');
INSERT INTO `cmc_project_contract` VALUES ('1648881413147852802', '1648881413147852802');
INSERT INTO `cmc_project_contract` VALUES ('1648881413164630018', '1648881413164630018');
INSERT INTO `cmc_project_contract` VALUES ('1648881413181407233', '1648881413181407233');
INSERT INTO `cmc_project_contract` VALUES ('1648881413227544578', '1648881413227544578');
INSERT INTO `cmc_project_contract` VALUES ('1648881413244321794', '1648881413244321794');
INSERT INTO `cmc_project_contract` VALUES ('1648881413265293314', '1648881413265293314');
INSERT INTO `cmc_project_contract` VALUES ('1648881413328207874', '1648881413328207874');
INSERT INTO `cmc_project_contract` VALUES ('1648881413344985090', '1648881413344985090');
INSERT INTO `cmc_project_contract` VALUES ('1648881413361762305', '1648881413361762305');
INSERT INTO `cmc_project_contract` VALUES ('1648881413395316737', '1648881413395316737');
INSERT INTO `cmc_project_contract` VALUES ('1648881413412093953', '1648881413412093953');
INSERT INTO `cmc_project_contract` VALUES ('1648881413441454081', '1648881412124442625');
INSERT INTO `cmc_project_contract` VALUES ('1648881413462425602', '1648881413462425602');
INSERT INTO `cmc_project_contract` VALUES ('1648881413483397121', '1648881413483397121');
INSERT INTO `cmc_project_contract` VALUES ('1648881413500174338', '1648881413500174338');
INSERT INTO `cmc_project_contract` VALUES ('1648881413512757249', '1648881413512757249');
INSERT INTO `cmc_project_contract` VALUES ('1648881413550505985', '1648881413265293314');
INSERT INTO `cmc_project_contract` VALUES ('1648881413584060417', '1648881413584060417');
INSERT INTO `cmc_project_contract` VALUES ('1648881413651169282', '1648881413651169282');
INSERT INTO `cmc_project_contract` VALUES ('1648881413667946498', '1648881413667946498');
INSERT INTO `cmc_project_contract` VALUES ('1648881413709889537', '1648881412124442625');
INSERT INTO `cmc_project_contract` VALUES ('1648881413751832578', '1648881414020268033');
INSERT INTO `cmc_project_contract` VALUES ('1648881413768609794', '1648881413768609794');
INSERT INTO `cmc_project_contract` VALUES ('1648881413785387010', '1648881413785387010');
INSERT INTO `cmc_project_contract` VALUES ('1648881413827330049', '1648881410631270457');
INSERT INTO `cmc_project_contract` VALUES ('1648881413860884481', '1648881413860884481');
INSERT INTO `cmc_project_contract` VALUES ('1648881413877661698', '1648881413877661698');
INSERT INTO `cmc_project_contract` VALUES ('1648881413894438914', '1648881413894438914');
INSERT INTO `cmc_project_contract` VALUES ('1648881413911216130', '1648881413911216130');
INSERT INTO `cmc_project_contract` VALUES ('1648881413927993346', '1648881413927993346');
INSERT INTO `cmc_project_contract` VALUES ('1648881413986713601', '1648881411298164738');
INSERT INTO `cmc_project_contract` VALUES ('1648881414020268033', '1648881414020268033');
INSERT INTO `cmc_project_contract` VALUES ('1648881414037045250', '1648881414037045250');
INSERT INTO `cmc_project_contract` VALUES ('1648881414066405377', '1648881414066405377');
INSERT INTO `cmc_project_contract` VALUES ('1648881414066405378', '1648881414066405378');
INSERT INTO `cmc_project_contract` VALUES ('1648881414066405379', '1648881414066405379');
INSERT INTO `cmc_project_contract` VALUES ('1648881414078988290', '1648881410631270457');
INSERT INTO `cmc_project_contract` VALUES ('1648881414095765505', '1648881414095765505');
INSERT INTO `cmc_project_contract` VALUES ('1648881414116737025', '1648881414116737025');
INSERT INTO `cmc_project_contract` VALUES ('1648881414192234498', '1648881414192234498');
INSERT INTO `cmc_project_contract` VALUES ('1648881414234177537', '1648881414234177537');
INSERT INTO `cmc_project_contract` VALUES ('1648881414259343361', '1648881414259343361');
INSERT INTO `cmc_project_contract` VALUES ('1648881414276120578', '1648881414276120578');
INSERT INTO `cmc_project_contract` VALUES ('1648881414292897793', '1648881414292897793');
INSERT INTO `cmc_project_contract` VALUES ('1648881414313869314', '1648881414313869314');
INSERT INTO `cmc_project_contract` VALUES ('1648881414355812353', '1648881414355812353');
INSERT INTO `cmc_project_contract` VALUES ('1648881414389366785', '1648881414389366785');
INSERT INTO `cmc_project_contract` VALUES ('1648881414431309825', '1648881413244321794');
INSERT INTO `cmc_project_contract` VALUES ('1648881414473252866', '1648881414473252866');
INSERT INTO `cmc_project_contract` VALUES ('1648881414511001602', '1648881414511001602');
INSERT INTO `cmc_project_contract` VALUES ('1648881414527778817', '1648881414527778817');
INSERT INTO `cmc_project_contract` VALUES ('1648881414544556034', '1648881414544556034');
INSERT INTO `cmc_project_contract` VALUES ('1648881414565527553', '1648881413244321794');
INSERT INTO `cmc_project_contract` VALUES ('1648881414582304770', '1648881414582304770');
INSERT INTO `cmc_project_contract` VALUES ('1648881414603276289', '1648881414603276289');
INSERT INTO `cmc_project_contract` VALUES ('1648881414641025025', '1648881414641025025');
INSERT INTO `cmc_project_contract` VALUES ('1648881414674579458', '1648881414674579458');
INSERT INTO `cmc_project_contract` VALUES ('1648881414695550978', '1648881414695550978');
INSERT INTO `cmc_project_contract` VALUES ('1648881414729105410', '1648881414674579458');
INSERT INTO `cmc_project_contract` VALUES ('1648881414750076930', '1648881414750076930');
INSERT INTO `cmc_project_contract` VALUES ('1648881414775242753', '1648881414775242753');
INSERT INTO `cmc_project_contract` VALUES ('1648881414796214274', '1648881414473252866');
INSERT INTO `cmc_project_contract` VALUES ('1648881414859128834', '1648881414859128834');
INSERT INTO `cmc_project_contract` VALUES ('1648881414880100353', '1648881414880100353');
INSERT INTO `cmc_project_contract` VALUES ('1648881414905266178', '1648881414905266178');
INSERT INTO `cmc_project_contract` VALUES ('1648881414951403522', '1648881414951403522');
INSERT INTO `cmc_project_contract` VALUES ('1648881414976569346', '1648881413244321794');
INSERT INTO `cmc_project_contract` VALUES ('1648881415001735169', '1648881418776608769');
INSERT INTO `cmc_project_contract` VALUES ('1648881415026900993', '1648881415026900993');
INSERT INTO `cmc_project_contract` VALUES ('1648881415047872514', '1648881415047872514');
INSERT INTO `cmc_project_contract` VALUES ('1648881415064649729', '1648881413244321794');
INSERT INTO `cmc_project_contract` VALUES ('1648881415186284546', '1648881414473252866');
INSERT INTO `cmc_project_contract` VALUES ('1648881415240810497', '1648881415240810497');
INSERT INTO `cmc_project_contract` VALUES ('1648881415265976322', '1648881415265976322');
INSERT INTO `cmc_project_contract` VALUES ('1648881415286947841', '1648881415286947841');
INSERT INTO `cmc_project_contract` VALUES ('1648881415349862402', '1648881415349862402');
INSERT INTO `cmc_project_contract` VALUES ('1648881415362445314', '1648881415362445314');
INSERT INTO `cmc_project_contract` VALUES ('1648881415375028225', '1648881415375028225');
INSERT INTO `cmc_project_contract` VALUES ('1648881415412776962', '1648881415412776962');
INSERT INTO `cmc_project_contract` VALUES ('1648881415429554178', '1648881417782558721');
INSERT INTO `cmc_project_contract` VALUES ('1648881415446331394', '1648881415446331394');
INSERT INTO `cmc_project_contract` VALUES ('1648881415458914305', '1648881413244321794');
INSERT INTO `cmc_project_contract` VALUES ('1648881415475691522', '1648881415475691522');
INSERT INTO `cmc_project_contract` VALUES ('1648881415492468738', '1648881415492468738');
INSERT INTO `cmc_project_contract` VALUES ('1648881415530217473', '1648881413651169282');
INSERT INTO `cmc_project_contract` VALUES ('1648881415551188994', '1648881414674579458');
INSERT INTO `cmc_project_contract` VALUES ('1648881415567966210', '1648881415567966210');
INSERT INTO `cmc_project_contract` VALUES ('1648881415630880769', '1648881415630880769');
INSERT INTO `cmc_project_contract` VALUES ('1648881415668629506', '1648881415668629506');
INSERT INTO `cmc_project_contract` VALUES ('1648881415685406721', '1648881415685406721');
INSERT INTO `cmc_project_contract` VALUES ('1648881415727349761', '1648881415727349761');
INSERT INTO `cmc_project_contract` VALUES ('1648881415781875714', '1648881415781875714');
INSERT INTO `cmc_project_contract` VALUES ('1648881415798652929', '1648881415798652929');
INSERT INTO `cmc_project_contract` VALUES ('1648881415815430146', '1648881415815430146');
INSERT INTO `cmc_project_contract` VALUES ('1648881415861567490', '1648881415861567490');
INSERT INTO `cmc_project_contract` VALUES ('1648881415895121921', '1648881415895121921');
INSERT INTO `cmc_project_contract` VALUES ('1648881415911899138', '1648881415911899138');
INSERT INTO `cmc_project_contract` VALUES ('1648881415932870657', '1648881415932870657');
INSERT INTO `cmc_project_contract` VALUES ('1648881415949647874', '1648881418776608769');
INSERT INTO `cmc_project_contract` VALUES ('1648881415962230785', '1648881415962230785');
INSERT INTO `cmc_project_contract` VALUES ('1648881415979008002', '1648881415979008002');
INSERT INTO `cmc_project_contract` VALUES ('1648881415991590913', '1648881414859128834');
INSERT INTO `cmc_project_contract` VALUES ('1648881416029339649', '1648881416029339649');
INSERT INTO `cmc_project_contract` VALUES ('1648881416100642818', '1648881415412776962');
INSERT INTO `cmc_project_contract` VALUES ('1648881416163557378', '1648881416163557378');
INSERT INTO `cmc_project_contract` VALUES ('1648881416213889025', '1648881416213889025');
INSERT INTO `cmc_project_contract` VALUES ('1648881416226471938', '1648881416226471938');
INSERT INTO `cmc_project_contract` VALUES ('1648881416243249154', '1648881416243249154');
INSERT INTO `cmc_project_contract` VALUES ('1648881416260026369', '1648881416260026369');
INSERT INTO `cmc_project_contract` VALUES ('1648881416276803586', '1648881414473252866');
INSERT INTO `cmc_project_contract` VALUES ('1648881416293580802', '1648881416293580802');
INSERT INTO `cmc_project_contract` VALUES ('1648881416310358017', '1648881414473252866');
INSERT INTO `cmc_project_contract` VALUES ('1648881416327135233', '1648881416327135233');
INSERT INTO `cmc_project_contract` VALUES ('1648881416343912449', '1648881416343912449');
INSERT INTO `cmc_project_contract` VALUES ('1648881416360689665', '1648881416360689665');
INSERT INTO `cmc_project_contract` VALUES ('1648881416377466882', '1648881416377466882');
INSERT INTO `cmc_project_contract` VALUES ('1648881416394244098', '1648881415861567490');
INSERT INTO `cmc_project_contract` VALUES ('1648881416411021314', '1648881416411021314');
INSERT INTO `cmc_project_contract` VALUES ('1648881416427798530', '1648881416427798530');
INSERT INTO `cmc_project_contract` VALUES ('1648881416444575746', '1648881416444575746');
INSERT INTO `cmc_project_contract` VALUES ('1648881416465547266', '1648881416411021314');
INSERT INTO `cmc_project_contract` VALUES ('1648881416520073217', '1648881416520073217');
INSERT INTO `cmc_project_contract` VALUES ('1648881416536850434', '1648881416536850434');
INSERT INTO `cmc_project_contract` VALUES ('1648881416578793474', '1648881416578793474');
INSERT INTO `cmc_project_contract` VALUES ('1648881416603959298', '1648881416603959298');
INSERT INTO `cmc_project_contract` VALUES ('1648881416620736513', '1648881416620736513');
INSERT INTO `cmc_project_contract` VALUES ('1648881416679456770', '1648881411298164738');
INSERT INTO `cmc_project_contract` VALUES ('1648881416721399809', '1648881416721399809');
INSERT INTO `cmc_project_contract` VALUES ('1648881416742371330', '1648881411298164738');
INSERT INTO `cmc_project_contract` VALUES ('1648881416759148545', '1648881416759148545');
INSERT INTO `cmc_project_contract` VALUES ('1648881416792702977', '1648881416792702977');
INSERT INTO `cmc_project_contract` VALUES ('1648881416830451713', '1648881411268804610');
INSERT INTO `cmc_project_contract` VALUES ('1648881417006612482', '1648881417006612482');
INSERT INTO `cmc_project_contract` VALUES ('1648881417044361218', '1648881417044361218');
INSERT INTO `cmc_project_contract` VALUES ('1648881417149218818', '1648881416721399809');
INSERT INTO `cmc_project_contract` VALUES ('1648881417367322626', '1648881417367322626');
INSERT INTO `cmc_project_contract` VALUES ('1648881417438625793', '1648881416721399809');
INSERT INTO `cmc_project_contract` VALUES ('1648881417472180225', '1648881417472180225');
INSERT INTO `cmc_project_contract` VALUES ('1648881417564454914', '1648881417564454914');
INSERT INTO `cmc_project_contract` VALUES ('1648881417707061250', '1648881414066405377');
INSERT INTO `cmc_project_contract` VALUES ('1648881417769975809', '1648881417769975809');
INSERT INTO `cmc_project_contract` VALUES ('1648881417782558721', '1648881417782558721');
INSERT INTO `cmc_project_contract` VALUES ('1648881417795141633', '1648881417795141633');
INSERT INTO `cmc_project_contract` VALUES ('1648881417807724546', '1648881417807724546');
INSERT INTO `cmc_project_contract` VALUES ('1648881417820307458', '1648881417807724546');
INSERT INTO `cmc_project_contract` VALUES ('1648881417837084674', '1648881417837084674');
INSERT INTO `cmc_project_contract` VALUES ('1648881417862250498', '1648881417862250498');
INSERT INTO `cmc_project_contract` VALUES ('1648881417971302402', '1648881417971302402');
INSERT INTO `cmc_project_contract` VALUES ('1648881418034216962', '1648881418034216962');
INSERT INTO `cmc_project_contract` VALUES ('1648881418214572034', '1648881416721399809');
INSERT INTO `cmc_project_contract` VALUES ('1648881418227154945', '1648881418227154945');
INSERT INTO `cmc_project_contract` VALUES ('1648881418256515073', '1648881418256515073');
INSERT INTO `cmc_project_contract` VALUES ('1648881418273292290', '1648881418273292290');
INSERT INTO `cmc_project_contract` VALUES ('1648881418290069506', '1648881418290069506');
INSERT INTO `cmc_project_contract` VALUES ('1648881418327818241', '1648881418327818241');
INSERT INTO `cmc_project_contract` VALUES ('1648881418340401153', '1648881418340401153');
INSERT INTO `cmc_project_contract` VALUES ('1648881418399121410', '1648881418399121410');
INSERT INTO `cmc_project_contract` VALUES ('1648881418411704322', '1648881418411704322');
INSERT INTO `cmc_project_contract` VALUES ('1648881418424287233', '1648881416226471938');
INSERT INTO `cmc_project_contract` VALUES ('1648881418441064449', '1648881418441064449');
INSERT INTO `cmc_project_contract` VALUES ('1648881418453647362', '1648881416721399809');
INSERT INTO `cmc_project_contract` VALUES ('1648881418508173314', '1648881418776608769');
INSERT INTO `cmc_project_contract` VALUES ('1648881418524950530', '1648881418524950530');
INSERT INTO `cmc_project_contract` VALUES ('1648881418541727745', '1648881414473252866');
INSERT INTO `cmc_project_contract` VALUES ('1648881418575282177', '1648881418575282177');
INSERT INTO `cmc_project_contract` VALUES ('1648881418592059394', '1648881418592059394');
INSERT INTO `cmc_project_contract` VALUES ('1648881418608836610', '1648881418608836610');
INSERT INTO `cmc_project_contract` VALUES ('1648881418642391041', '1648881418642391041');
INSERT INTO `cmc_project_contract` VALUES ('1648881418696916993', '1648881418696916993');
INSERT INTO `cmc_project_contract` VALUES ('1648881418713694209', '1648881416721399809');
INSERT INTO `cmc_project_contract` VALUES ('1648881418747248642', '1648881416759148545');
INSERT INTO `cmc_project_contract` VALUES ('1648881418764025857', '1648881418764025857');
INSERT INTO `cmc_project_contract` VALUES ('1648881418776608769', '1648881418776608769');
INSERT INTO `cmc_project_contract` VALUES ('1648881418793385986', '1648881418793385986');
INSERT INTO `cmc_project_contract` VALUES ('1648881418822746114', '1648881418822746114');
INSERT INTO `cmc_project_contract` VALUES ('1648881418835329026', '1648881413584060417');
INSERT INTO `cmc_project_contract` VALUES ('1648881418894049281', '1648881418894049281');
INSERT INTO `cmc_project_contract` VALUES ('1648881418910826498', '1648881418910826498');
INSERT INTO `cmc_project_contract` VALUES ('1648881418923409409', '1648881418923409409');
INSERT INTO `cmc_project_contract` VALUES ('1648881419070210050', '1648881419070210050');
INSERT INTO `cmc_project_contract` VALUES ('1648881419086987266', '1648881419070210050');
INSERT INTO `cmc_project_contract` VALUES ('1648881419162484738', '1648881419162484738');
INSERT INTO `cmc_project_contract` VALUES ('1648881419271536642', '1648881416226471938');
INSERT INTO `cmc_project_contract` VALUES ('1648881421276413954', '1648881421276413954');
INSERT INTO `cmc_project_contract` VALUES ('1648881421368688642', '1648881414473252866');

-- ----------------------------
-- 54、cmc业主单位表
-- ----------------------------
drop table if exists `cmc_party_a`;
create table `cmc_party_a`  (
  `party_a_id` 				char(4)   		not null	 comment '业主单位id',
  `party_a_name` 			varchar(50)  	default null comment '单位名称',
  primary key (`party_a_id`)
) engine = innodb comment = 'cmc业主单位表';

-- ----------------------------
-- 初始化-业主单位表数据
-- ----------------------------
INSERT INTO `cmc_party_a` VALUES ('0001', '阿勒泰地区吉木乃县畜牧兽医局');
INSERT INTO `cmc_party_a` VALUES ('0002', '巴南区人民政府一品街道办事处');
INSERT INTO `cmc_party_a` VALUES ('0003', '巴中市不动产登记中心巴州分中心');
INSERT INTO `cmc_party_a` VALUES ('0004', '巴中市国资运营集团建设工程有限公司');
INSERT INTO `cmc_party_a` VALUES ('0005', '白玉县文化广播电视和旅游局');
INSERT INTO `cmc_party_a` VALUES ('0006', '北京市信息资源管理中心');
INSERT INTO `cmc_party_a` VALUES ('0007', '北京中咨路捷工程技术咨询有限公司');
INSERT INTO `cmc_party_a` VALUES ('0008', '苍溪县发展和改革局');
INSERT INTO `cmc_party_a` VALUES ('0009', '苍溪县防汛抗旱减灾事务中心（原苍溪县抗旱服务队）');
INSERT INTO `cmc_party_a` VALUES ('0010', '苍溪县抗旱服务队');
INSERT INTO `cmc_party_a` VALUES ('0011', '苍溪县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0012', '成都诚道交通科技研发有限公司');
INSERT INTO `cmc_party_a` VALUES ('0013', '成都城投基础设施建设投资有限公司');
INSERT INTO `cmc_party_a` VALUES ('0014', '成都高新技术产业开发区发展改革和规划管理局');
INSERT INTO `cmc_party_a` VALUES ('0015', '成都高新技术产业开发区公园城市建设局');
INSERT INTO `cmc_party_a` VALUES ('0016', '成都高新技术产业开发区经济运行局(原成都高新区统筹城乡工作局)');
INSERT INTO `cmc_party_a` VALUES ('0017', '成都光华智慧停车场建设有限公司');
INSERT INTO `cmc_party_a` VALUES ('0018', '成都青羊城乡建设发展有限公司');
INSERT INTO `cmc_party_a` VALUES ('0019', '成都山海雨图科技有限公司');
INSERT INTO `cmc_party_a` VALUES ('0020', '成都市成华区规划和自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0021', '成都市建筑设计研究院有限公司');
INSERT INTO `cmc_party_a` VALUES ('0022', '成都市交通规划勘察设计研究院有限公司');
INSERT INTO `cmc_party_a` VALUES ('0023', '成都市金牛区人民政府西安路街道办事处');
INSERT INTO `cmc_party_a` VALUES ('0024', '成都市金牛区人民政府西华街道办事处');
INSERT INTO `cmc_party_a` VALUES ('0025', '成都市锦江区规划和自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0026', '成都市锦江区人民政府三圣街道办事处');
INSERT INTO `cmc_party_a` VALUES ('0027', '成都市李家岩开发有限公司');
INSERT INTO `cmc_party_a` VALUES ('0028', '成都市龙泉驿区规划和自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0029', '成都市青白江区规划和自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0030', '成都市武侯区规划和自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0031', '成都市新都区人民政府石板滩街道办事处');
INSERT INTO `cmc_party_a` VALUES ('0032', '成都市兴城投资集团有限公司');
INSERT INTO `cmc_party_a` VALUES ('0033', '成都市兴光华城市建设有限公司');
INSERT INTO `cmc_party_a` VALUES ('0034', '成都兴锦城市更新建设发展有限公司');
INSERT INTO `cmc_party_a` VALUES ('0035', '大方县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0036', '大庆石油管理局有限公司');
INSERT INTO `cmc_party_a` VALUES ('0037', '大庆石油管理局有限公司分离移交业务维修改造项目经理部');
INSERT INTO `cmc_party_a` VALUES ('0038', '大庆油田信息技术公司');
INSERT INTO `cmc_party_a` VALUES ('0039', '大唐观音岩水电开发有限公司');
INSERT INTO `cmc_party_a` VALUES ('0040', '大唐四川电力检修运营有限公司');
INSERT INTO `cmc_party_a` VALUES ('0041', '大邑县规划和自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0042', '大竹县城乡规划编制中心');
INSERT INTO `cmc_party_a` VALUES ('0043', '稻城县文化广播电视和旅游局');
INSERT INTO `cmc_party_a` VALUES ('0044', '德昌县农牧局');
INSERT INTO `cmc_party_a` VALUES ('0045', '德阳市罗江区自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0046', '都江堰市规划和自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0047', '峨眉山市农业局');
INSERT INTO `cmc_party_a` VALUES ('0048', '二滩水电开发有限责任公司');
INSERT INTO `cmc_party_a` VALUES ('0049', '佛山樵科投资管理有限公司');
INSERT INTO `cmc_party_a` VALUES ('0050', '佛山市南海江兴产业投资发展有限公司');
INSERT INTO `cmc_party_a` VALUES ('0051', '佛山市南海樵山文化中心有限公司');
INSERT INTO `cmc_party_a` VALUES ('0052', '佛山市南海区测绘成果质量检验中心');
INSERT INTO `cmc_party_a` VALUES ('0053', '佛山市南海区大沥镇城建和水利办公室');
INSERT INTO `cmc_party_a` VALUES ('0054', '佛山市南海区丹灶镇城建和水利办公室');
INSERT INTO `cmc_party_a` VALUES ('0055', '佛山市南海区桂城街道办事处');
INSERT INTO `cmc_party_a` VALUES ('0056', '佛山市南海区锦时投资有限公司');
INSERT INTO `cmc_party_a` VALUES ('0057', '佛山市南海区九江镇城建和水利办公室');
INSERT INTO `cmc_party_a` VALUES ('0058', '佛山市南海区九江镇南金村南金经济联合社');
INSERT INTO `cmc_party_a` VALUES ('0059', '佛山市南海区里水镇城建和水利办公室');
INSERT INTO `cmc_party_a` VALUES ('0060', '佛山市南海区土地测绘所');
INSERT INTO `cmc_party_a` VALUES ('0061', '佛山市南海区西樵镇樵有资产管理有限公司');
INSERT INTO `cmc_party_a` VALUES ('0062', '佛山市南海区重点基础设施建设征地拆迁领导小组办公室');
INSERT INTO `cmc_party_a` VALUES ('0063', '佛山市南海通创有限公司');
INSERT INTO `cmc_party_a` VALUES ('0064', '佛山市粤樵资产管理有限公司');
INSERT INTO `cmc_party_a` VALUES ('0065', '福建水口发电集团有限公司');
INSERT INTO `cmc_party_a` VALUES ('0066', '阜新市自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0067', '甘洛县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0068', '甘孜藏族自治州水利局');
INSERT INTO `cmc_party_a` VALUES ('0069', '甘孜州道孚县水利局');
INSERT INTO `cmc_party_a` VALUES ('0070', '古蔺县水务局');
INSERT INTO `cmc_party_a` VALUES ('0071', '广东联合金地不动产评估勘测设计有限公司');
INSERT INTO `cmc_party_a` VALUES ('0072', '广元市利州区水利局');
INSERT INTO `cmc_party_a` VALUES ('0073', '广元市自然资源局昭化区分局');
INSERT INTO `cmc_party_a` VALUES ('0074', '广州航遥信息科技有限公司');
INSERT INTO `cmc_party_a` VALUES ('0075', '贵阳市测绘院');
INSERT INTO `cmc_party_a` VALUES ('0076', '贵州初子午线工程测绘有限公司');
INSERT INTO `cmc_party_a` VALUES ('0077', '国电大渡河深溪沟水电有限公司');
INSERT INTO `cmc_party_a` VALUES ('0078', '国电大渡河双江口工程建设管理分公司');
INSERT INTO `cmc_party_a` VALUES ('0079', '国能大渡河大岗山发电有限公司');
INSERT INTO `cmc_party_a` VALUES ('0080', '国能大渡河猴子岩发电有限公司');
INSERT INTO `cmc_party_a` VALUES ('0081', '国能大渡河金川水电建设有限公司');
INSERT INTO `cmc_party_a` VALUES ('0082', '国能青海黄河玛尔挡水电开发有限公司');
INSERT INTO `cmc_party_a` VALUES ('0083', '国能四川阿水电力开发有限公司');
INSERT INTO `cmc_party_a` VALUES ('0084', '国网四川省电力公司阿坝供电公司');
INSERT INTO `cmc_party_a` VALUES ('0085', '国网西藏电力有限公司拉萨发电公司');
INSERT INTO `cmc_party_a` VALUES ('0086', '国网西藏电力有限公司那曲供电公司');
INSERT INTO `cmc_party_a` VALUES ('0087', '国网羊湖发电公司');
INSERT INTO `cmc_party_a` VALUES ('0088', '红原县水务局');
INSERT INTO `cmc_party_a` VALUES ('0089', '华能西藏雅鲁藏布江水电开发投资有限公司');
INSERT INTO `cmc_party_a` VALUES ('0090', '黄河勘测规划设计研究院有限公司');
INSERT INTO `cmc_party_a` VALUES ('0091', '黄河水资源保护科学研究院');
INSERT INTO `cmc_party_a` VALUES ('0092', '会理县农业农村局（原会理县农牧局）');
INSERT INTO `cmc_party_a` VALUES ('0093', '会理县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0094', '简阳市规划和自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0095', '简阳市水务局');
INSERT INTO `cmc_party_a` VALUES ('0096', '剑阁县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0097', '京山市自然资源和规划局');
INSERT INTO `cmc_party_a` VALUES ('0098', '九龙县水利局');
INSERT INTO `cmc_party_a` VALUES ('0099', '喀什地区自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0100', '乐山市沙湾区自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0101', '雷波县农业农村局（原雷波县农牧局）');
INSERT INTO `cmc_party_a` VALUES ('0102', '理塘县河源水电开发有限公司');
INSERT INTO `cmc_party_a` VALUES ('0103', '理县住房和城乡建设局');
INSERT INTO `cmc_party_a` VALUES ('0104', '凉山州自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0105', '两河口建设管理局');
INSERT INTO `cmc_party_a` VALUES ('0106', '邻水县农业农村局');
INSERT INTO `cmc_party_a` VALUES ('0107', '邻水县水务局');
INSERT INTO `cmc_party_a` VALUES ('0108', '邻水县自然资源和规划局');
INSERT INTO `cmc_party_a` VALUES ('0109', '泸定县昌源电力开发有限公司');
INSERT INTO `cmc_party_a` VALUES ('0110', '泸定县祥智电能有限公司');
INSERT INTO `cmc_party_a` VALUES ('0111', '泸县自然资源和规划局');
INSERT INTO `cmc_party_a` VALUES ('0112', '美姑县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0113', '绵竹市金申文化旅游开发有限公司');
INSERT INTO `cmc_party_a` VALUES ('0114', '沐川县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0115', '南部县农业农村局（原中共南部县委农村工作委员会）');
INSERT INTO `cmc_party_a` VALUES ('0116', '南部县水务局');
INSERT INTO `cmc_party_a` VALUES ('0117', '南充家丰时装有限公司');
INSERT INTO `cmc_party_a` VALUES ('0118', '南充市高坪区自然资源和规划局');
INSERT INTO `cmc_party_a` VALUES ('0119', '南方电网数字电网研究院有限公司');
INSERT INTO `cmc_party_a` VALUES ('0120', '南江县不动产登记中心');
INSERT INTO `cmc_party_a` VALUES ('0121', '内江市市中区不动产登记中心');
INSERT INTO `cmc_party_a` VALUES ('0122', '宁南县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0123', '宁夏回族自治区测绘地理信息院');
INSERT INTO `cmc_party_a` VALUES ('0124', '彭州市规划和自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0125', '蓬安县自然资源和规划局');
INSERT INTO `cmc_party_a` VALUES ('0126', '蒲江县规划和自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0127', '普格县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0128', '青川县水利局');
INSERT INTO `cmc_party_a` VALUES ('0129', '青川县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0130', '青海省自然资源厅');
INSERT INTO `cmc_party_a` VALUES ('0131', '青神金弘能源投资开发有限公司');
INSERT INTO `cmc_party_a` VALUES ('0132', '青神县砂石管理办公室');
INSERT INTO `cmc_party_a` VALUES ('0133', '青神县砂石资源开采服务中心');
INSERT INTO `cmc_party_a` VALUES ('0134', '清城区农业农村局');
INSERT INTO `cmc_party_a` VALUES ('0135', '清远市清新区农业农村局');
INSERT INTO `cmc_party_a` VALUES ('0136', '邛崃市规划和自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0137', '琼结县农业农村局');
INSERT INTO `cmc_party_a` VALUES ('0138', '乳源瑶族自治县安之源建设有限公司');
INSERT INTO `cmc_party_a` VALUES ('0139', '乳源瑶族自治县金瑶城市经营投资有限公司');
INSERT INTO `cmc_party_a` VALUES ('0140', '乳源瑶族自治县金源资产经营有限公司');
INSERT INTO `cmc_party_a` VALUES ('0141', '乳源瑶族自治县市政管理中心');
INSERT INTO `cmc_party_a` VALUES ('0142', '乳源瑶族自治县土地整治管理中心');
INSERT INTO `cmc_party_a` VALUES ('0143', '乳源瑶族自治县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0144', '三台县河湖保护中心');
INSERT INTO `cmc_party_a` VALUES ('0145', '三台县农业农村局');
INSERT INTO `cmc_party_a` VALUES ('0146', '三台县水利局');
INSERT INTO `cmc_party_a` VALUES ('0147', '三峡金沙江川云水电开发有限公司永善溪洛渡电厂');
INSERT INTO `cmc_party_a` VALUES ('0148', '色达县自然资源和规划局');
INSERT INTO `cmc_party_a` VALUES ('0149', '莎车县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0150', '韶关乳源高新技术产业开发区管理委员会（广东乳源经济开发区管理委员会）');
INSERT INTO `cmc_party_a` VALUES ('0151', '韶关石人嶂矿业有限责任公司');
INSERT INTO `cmc_party_a` VALUES ('0152', '韶关市政府投资建设项目代建管理局');
INSERT INTO `cmc_party_a` VALUES ('0153', '什邡市自然资源和规划局');
INSERT INTO `cmc_party_a` VALUES ('0154', '石棉县自然资源和规划局');
INSERT INTO `cmc_party_a` VALUES ('0155', '石棉县坤鑫文化旅游发展有限公司');
INSERT INTO `cmc_party_a` VALUES ('0156', '石棉县水利局');
INSERT INTO `cmc_party_a` VALUES ('0157', '石棉县星空旅游开发有限责任公司');
INSERT INTO `cmc_party_a` VALUES ('0158', '水发规划设计有限公司');
INSERT INTO `cmc_party_a` VALUES ('0159', '四川大渡河双江口水电开发有限公司');
INSERT INTO `cmc_party_a` VALUES ('0160', '四川德瑞文旅集团有限公司');
INSERT INTO `cmc_party_a` VALUES ('0161', '四川地信测绘计量检测有限公司');
INSERT INTO `cmc_party_a` VALUES ('0162', '四川广阆建设工程有限责任公司');
INSERT INTO `cmc_party_a` VALUES ('0163', '四川华电泸定水电有限公司');
INSERT INTO `cmc_party_a` VALUES ('0164', '四川华能太平驿水电有限责任公司');
INSERT INTO `cmc_party_a` VALUES ('0165', '四川嘉陵江桐子壕航电开发有限公司');
INSERT INTO `cmc_party_a` VALUES ('0166', '四川旅游规划设计研究院');
INSERT INTO `cmc_party_a` VALUES ('0167', '四川南源创能建材有限公司');
INSERT INTO `cmc_party_a` VALUES ('0168', '四川三江地理信息工程有限公司');
INSERT INTO `cmc_party_a` VALUES ('0169', '四川省地震局');
INSERT INTO `cmc_party_a` VALUES ('0170', '四川省公路规划勘察设计研究院有限公司');
INSERT INTO `cmc_party_a` VALUES ('0171', '四川省能投攀枝花水电开发有限公司');
INSERT INTO `cmc_party_a` VALUES ('0172', '四川省水利水电勘测设计研究院测绘分院');
INSERT INTO `cmc_party_a` VALUES ('0173', '四川省雅安市名山区前进乡人民政府');
INSERT INTO `cmc_party_a` VALUES ('0174', '四川省冶金地质勘查局成都地质调查所');
INSERT INTO `cmc_party_a` VALUES ('0175', '四川省长葫灌区管理局');
INSERT INTO `cmc_party_a` VALUES ('0176', '四川省长葫灌区运管中心');
INSERT INTO `cmc_party_a` VALUES ('0177', '四川省自然资源厅');
INSERT INTO `cmc_party_a` VALUES ('0178', '四川思达能环保科技有限公司');
INSERT INTO `cmc_party_a` VALUES ('0179', '四川天府新区眉山管理委员会自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0180', '四川天盈实业有限责任公司');
INSERT INTO `cmc_party_a` VALUES ('0181', '四川添禾农业投资有限公司');
INSERT INTO `cmc_party_a` VALUES ('0182', '四川田册科技有限公司');
INSERT INTO `cmc_party_a` VALUES ('0183', '四川兴晨华远建设工程有限公司');
INSERT INTO `cmc_party_a` VALUES ('0184', '四川中水成勘院工程物探检测有限公司');
INSERT INTO `cmc_party_a` VALUES ('0185', '四川中水德方（成都）工程勘察设计有限公司');
INSERT INTO `cmc_party_a` VALUES ('0186', '四川足木足河流域水电开发有限公司');
INSERT INTO `cmc_party_a` VALUES ('0187', '天府新区万安街道办事处');
INSERT INTO `cmc_party_a` VALUES ('0188', '天津宝坻华电青龙湾新能源有限公司');
INSERT INTO `cmc_party_a` VALUES ('0189', '通江县自然资源和规划局');
INSERT INTO `cmc_party_a` VALUES ('0190', '汶川县城乡规划建设和住房保障局');
INSERT INTO `cmc_party_a` VALUES ('0191', '西安中交公路岩土工程有限责任公司');
INSERT INTO `cmc_party_a` VALUES ('0192', '西藏昌都市住房和城乡建设局');
INSERT INTO `cmc_party_a` VALUES ('0193', '西藏自治区地质矿产勘查开发局第五地质大队');
INSERT INTO `cmc_party_a` VALUES ('0194', '西藏自治区自然资源厅');
INSERT INTO `cmc_party_a` VALUES ('0195', '西昌市农牧局');
INSERT INTO `cmc_party_a` VALUES ('0196', '西南交通大学');
INSERT INTO `cmc_party_a` VALUES ('0197', '西樵镇锦湖片区开发建设工作办公室');
INSERT INTO `cmc_party_a` VALUES ('0198', '喜德县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0199', '雅安市名山区水利局');
INSERT INTO `cmc_party_a` VALUES ('0200', '雅砻江流域水电开发有限公司');
INSERT INTO `cmc_party_a` VALUES ('0201', '雅砻江水电甘孜有限公司');
INSERT INTO `cmc_party_a` VALUES ('0202', '雅砻江水电攀枝花有限公司');
INSERT INTO `cmc_party_a` VALUES ('0203', '盐源县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0204', '阳江市中申高速公路投资有限公司');
INSERT INTO `cmc_party_a` VALUES ('0205', '阳山县农业农村局');
INSERT INTO `cmc_party_a` VALUES ('0206', '阳山县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0207', '冶勘设计集团');
INSERT INTO `cmc_party_a` VALUES ('0208', '依安县自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0209', '仪陇县永光镇人民政府');
INSERT INTO `cmc_party_a` VALUES ('0210', '仪陇县自然资源和规划局');
INSERT INTO `cmc_party_a` VALUES ('0211', '宜宾市自然资源和规划局叙州区分局');
INSERT INTO `cmc_party_a` VALUES ('0212', '宜宾市叙州区林业局');
INSERT INTO `cmc_party_a` VALUES ('0213', '粤北城市燃气（乳源）有限公司');
INSERT INTO `cmc_party_a` VALUES ('0214', '云南省建设投资控股集团有限公司');
INSERT INTO `cmc_party_a` VALUES ('0215', '云南省交通规划设计研究院有限公司');
INSERT INTO `cmc_party_a` VALUES ('0216', '云南省交通投资建设集团有限公司');
INSERT INTO `cmc_party_a` VALUES ('0217', '长江勘测规划设计研究有限责任公司');
INSERT INTO `cmc_party_a` VALUES ('0218', '长宁县水务局');
INSERT INTO `cmc_party_a` VALUES ('0219', '浙江华东测绘地理信息有限公司');
INSERT INTO `cmc_party_a` VALUES ('0220', '浙江华东测绘与工程安全技术有限公司');
INSERT INTO `cmc_party_a` VALUES ('0221', '浙江宁海抽水蓄能有限公司');
INSERT INTO `cmc_party_a` VALUES ('0222', '正安县毛家塘水力发电有限公司');
INSERT INTO `cmc_party_a` VALUES ('0223', '中共阆中市委农村工作委员会');
INSERT INTO `cmc_party_a` VALUES ('0224', '中国电建集团北京勘测设计研究院有限公司');
INSERT INTO `cmc_party_a` VALUES ('0225', '中国电建集团北京勘测设计研究院有限公司（两河口移民工程总承包项目部）');
INSERT INTO `cmc_party_a` VALUES ('0226', '中国电建集团成都勘测设计研究院有限公司');
INSERT INTO `cmc_party_a` VALUES ('0227', '中国电建集团成都勘测设计研究院有限公司（城乡发展工程分公司）');
INSERT INTO `cmc_party_a` VALUES ('0228', '中国电建集团成都勘测设计研究院有限公司（工程建设分公司）');
INSERT INTO `cmc_party_a` VALUES ('0229', '中国电建集团成都勘测设计研究院有限公司（基础设施分公司）');
INSERT INTO `cmc_party_a` VALUES ('0230', '中国电建集团成都勘测设计研究院有限公司（建设管理部）');
INSERT INTO `cmc_party_a` VALUES ('0231', '中国电建集团成都勘测设计研究院有限公司（勘测设计分公司）');
INSERT INTO `cmc_party_a` VALUES ('0232', '中国电建集团成都勘测设计研究院有限公司（勘测设计分公司规划院）');
INSERT INTO `cmc_party_a` VALUES ('0233', '中国电建集团成都勘测设计研究院有限公司（勘测设计分公司科研院）');
INSERT INTO `cmc_party_a` VALUES ('0234', '中国电建集团成都勘测设计研究院有限公司（生态环保工程分公司）');
INSERT INTO `cmc_party_a` VALUES ('0235', '中国电建集团成都勘测设计研究院有限公司（数字工程分公司）');
INSERT INTO `cmc_party_a` VALUES ('0236', '中国电建集团成都勘测设计研究院有限公司（水环境与城建工程分公司）');
INSERT INTO `cmc_party_a` VALUES ('0237', '中国电建集团成都勘测设计研究院有限公司（西藏电建成勘院工程有限公司）');
INSERT INTO `cmc_party_a` VALUES ('0238', '中国电建集团成都勘测设计研究院有限公司（新能源工程分公司）');
INSERT INTO `cmc_party_a` VALUES ('0239', '中国电建集团成都勘测设计研究院有限公司（中国电建集团城市规划设计研究院有限公司）');
INSERT INTO `cmc_party_a` VALUES ('0240', '中国电建集团华东勘测设计研究院有限公司');
INSERT INTO `cmc_party_a` VALUES ('0241', '中国电建集团昆明勘测设计研究院有限公司');
INSERT INTO `cmc_party_a` VALUES ('0242', '中国电建集团中南勘测设计研究院有限公司');
INSERT INTO `cmc_party_a` VALUES ('0243', '中国电力工程顾问集团新能源有限公司');
INSERT INTO `cmc_party_a` VALUES ('0244', '中国国土勘测规划院');
INSERT INTO `cmc_party_a` VALUES ('0245', '中国华电科工集团广安项目部');
INSERT INTO `cmc_party_a` VALUES ('0246', '中国华西工程设计建设有限公司');
INSERT INTO `cmc_party_a` VALUES ('0247', '中国建筑材料工业地质勘查中心贵州总队');
INSERT INTO `cmc_party_a` VALUES ('0248', '中国建筑西南勘察设计研究院有限公司');
INSERT INTO `cmc_party_a` VALUES ('0249', '中国建筑西南设计研究院有限公司');
INSERT INTO `cmc_party_a` VALUES ('0250', '中国能源建设集团云南省电力设计院有限公司');
INSERT INTO `cmc_party_a` VALUES ('0251', '中国石油工程建设有限公司西南分公司');
INSERT INTO `cmc_party_a` VALUES ('0252', '中国铁建港航局集团有限公司大连庄河海上风电场址Ⅳ1项目经理部');
INSERT INTO `cmc_party_a` VALUES ('0253', '中国铁建港航局集团有限公司金川水电站G248复建公路Ⅲ标项目经理部');
INSERT INTO `cmc_party_a` VALUES ('0254', '中国铁路成都局集团有限公司贵阳高铁工务段');
INSERT INTO `cmc_party_a` VALUES ('0255', '中国铁路沈阳局集团有限公司沈阳工程建设指挥部');
INSERT INTO `cmc_party_a` VALUES ('0256', '中国土地勘测规划院');
INSERT INTO `cmc_party_a` VALUES ('0257', '中国邮政集团公司佛山市南海区分公司');
INSERT INTO `cmc_party_a` VALUES ('0258', '中交公路规划设计院有限公司北京岩土工程技术分公司');
INSERT INTO `cmc_party_a` VALUES ('0259', '中山市自然资源局');
INSERT INTO `cmc_party_a` VALUES ('0260', '中水成勘院（云南）建设发展有限公司');
INSERT INTO `cmc_party_a` VALUES ('0261', '中铁八局集团有限公司');
INSERT INTO `cmc_party_a` VALUES ('0262', '中铁大桥局');
INSERT INTO `cmc_party_a` VALUES ('0263', '中铁十八局集团有限公司重庆至黔江站前5标项目经理部');
INSERT INTO `cmc_party_a` VALUES ('0264', '中铁十八局集团有限公司重庆至黔江站前6标项目经理部');
INSERT INTO `cmc_party_a` VALUES ('0265', '中铁十六局集团路桥工程有限公司');
INSERT INTO `cmc_party_a` VALUES ('0266', '重庆巴南经济园区建设实业有限公司');
INSERT INTO `cmc_party_a` VALUES ('0267', '重庆保税港区开发管理集团有限公司');
INSERT INTO `cmc_party_a` VALUES ('0268', '重庆两江新区建设管理局');
INSERT INTO `cmc_party_a` VALUES ('0269', '重庆两江新区土地储备整治中心');
INSERT INTO `cmc_party_a` VALUES ('0270', '重庆情旅侠乡村旅游有限公司');
INSERT INTO `cmc_party_a` VALUES ('0271', '重庆市巴南区一品街道金田村村民委员会');
INSERT INTO `cmc_party_a` VALUES ('0272', '重庆市测绘科学技术研究院');
INSERT INTO `cmc_party_a` VALUES ('0273', '重庆市江北嘴中央商务区投资集团有限公司');
INSERT INTO `cmc_party_a` VALUES ('0274', '重庆市江南城市建设资产经营管理有限公司');
INSERT INTO `cmc_party_a` VALUES ('0275', '重庆市勘测院');
INSERT INTO `cmc_party_a` VALUES ('0276', '重庆市客轮有限公司');
INSERT INTO `cmc_party_a` VALUES ('0277', '重庆市武隆区农业农村委员会');
INSERT INTO `cmc_party_a` VALUES ('0278', '重庆市永川区侨立水务有限公司');
INSERT INTO `cmc_party_a` VALUES ('0279', '重庆数字城市科技有限公司');
INSERT INTO `cmc_party_a` VALUES ('0280', '自贡市釜溪水务投资开发有限公司');
INSERT INTO `cmc_party_a` VALUES ('0281', '自贡市沿滩新城区管理委员会');
INSERT INTO `cmc_party_a` VALUES ('0282', '自然资源部第七地形测量队');

-- ----------------------------
-- 55、cmc合作单位表
-- ----------------------------
drop table if exists `cmc_partner`;
create table `cmc_partner`  (
  `partner_id` 				char(4)   		not null	 comment '合作单位id',
  `partner_name` 			varchar(50)  	default null comment '单位名称',
  `contact_person` 			varchar(50)  	default null comment '联系人',
  `telephone` 				varchar(50)  	default null comment '联系电话',
  `qualification` 			char(1)  		default null comment '资质等级',
  `in_worker` 				int  			default null comment '内业规模',
  `out_worker` 				int  			default null comment '外业规模',
  `equipment` 				varchar(255)  	default null comment '主要技术装备',
  `strength` 				varchar(255)  	default null comment '擅长业务方向',
  `fulfill` 				char(1)  		default null comment '履约能力评价',
  `remark` 					varchar(255)  	default null comment '备注说明',
  primary key (`partner_id`)
) engine = innodb comment = 'cmc合作单位表';

-- ----------------------------
-- 初始化-合作单位表数据
-- ----------------------------
INSERT INTO `cmc_partner` VALUES ('0001', '巴彦淖尔市众行测绘技术服务有限公司', '王天', '18341894357', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0002', '保定陆弛市政工程有限公司', '张策', '15130380832', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0003', '北京东方志远科技股份有限公司', '王大伟', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0004', '北京航天世景信息技术有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0005', '北京华遥星宇科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0006', '北京天目创新科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0007', '博州自然资源勘测规划院', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0008', '成都北斗华测导航技术有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0009', '成都北斗天地科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0010', '成都博力图科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0011', '成都点云时空科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0012', '成都发启岩土工程勘察设计有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0013', '成都光大测绘咨询有限公司', '代倩', '18081893553', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0014', '成都华兴拓图空间信息科技有限公司', '王小刚', '13880716273', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0015', '成都绘成测绘有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0016', '成都颉达科技有限公司', '程海涛', '', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0017', '成都经开地理信息勘测设计院有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0018', '成都经纬空间科技有限公司', '尚进', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0019', '成都精准工程造价咨询有限公司', '江超', '13548114060', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0020', '成都林辉测绘服务有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0021', '成都六合四游遥感技术有限公司', '赵静', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0022', '成都民心勘察测绘有限责任公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0023', '成都木乘科技有限公司（成都田冶测绘有限公司）', '陈存鸿', '18780226389', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0024', '成都木尔科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0025', '成都三维云景科技发展有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0026', '成都时代加华软件技术有限公司', '黄振戈', '18981963993', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0027', '成都市宏锦图文科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0028', '成都威尔齐空间信息技术有限公司', '岳希军', '13980600197', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0029', '成都维鑫诚工程设计有限公司', '代维', '13880065566', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0030', '成都鑫禾新建筑工程有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0031', '成都引泰丰元科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0032', '成都英创思科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0033', '成都永杰测绘技术服务有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0034', '成都永鑫科技有限责任公司', '王薇、杨恒', '15608043005、18981779144', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0035', '成都志诚致远科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0036', '成都中程测绘有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0037', '成都中地时空科技有限公司', '胥执刚', '15828697142', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0038', '德阳蜀科地质勘查有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0039', '二十一世纪空间技术应用股份有限公司', '杨卫', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0040', '佛山市中诚建筑工程测绘检测有限公司', '刘浩正', '13928623777', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0041', '高新区惠泽通信息咨询服务部', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0042', '广东金冠科技股份有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0043', '广州航遥信息科技有限公司', '贾春华', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0044', '广州建通测绘地理信息技术股份有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0045', '广州鲲鹏航空信息科技有限公司', '贾春华', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0046', '广州南方测绘科技股份有限公司成都分公司', '王茂羽', '13980067269', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0047', '贵州初子午线工程测绘有限公司', '赵总、赵伟', '13885191108、13595100604', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0048', '贵州智绘锦图测绘工程有限公司', '杨健新', '13984071383', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0049', '河北晨枫地理信息技术有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0050', '河南省地球物理工程勘察院', '刘晨熙', '', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0051', '河南遥绘星维信息技术有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0052', '核工业北京地质研究院', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0053', '黑龙江省弘跃测绘技术服务有限责任公司', '李云志', '15546311222', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0054', '湖北朝骏测绘有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0055', '黄河水利委员会上游水文水资源局', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0056', '江西环绕科技服务有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0057', '九江地质工程勘察院', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0058', '凉山州恒信测绘有限责任公司', '何建', '18113224200', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0059', '辽宁盛鸿佳业建筑有限责任公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0060', '南充市宏扬钻探工程有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0061', '南方（北京）遥感科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0062', '宁夏回族自治区自然资源成果质量检验中心', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0063', '莆田市山海测绘技术有限公司', '游杨声', '13996329278', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0064', '齐齐哈尔图源科技有限公司', '刘鑫', '15694348000', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0065', '山东欣亚通用航空有限公司', '胡家玲', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0066', '陕西图泽天地地理信息技术服务有限公司', '宁清', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0067', '上海华测导航技术股份有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0068', '上海数喆数据科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0069', '上海亚壕科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0070', '韶关市荣兴工程测绘有限责任公司', '谭振晖、钟开伟', '18128913000', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0071', '深圳市邦茨空间设计有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0072', '四川辰吉信息科技有限公司', '邹勇', '13458493330', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0073', '四川成都西米宏成测绘有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0074', '四川诚挚远劳务有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0075', '四川晟堡途工程技术服务有限公司', '任玖', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0076', '四川大圣智云科技有限公司', '黄菲菲', '13880441332', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0077', '四川德方智云勘测设计有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0078', '四川地信测绘计量检测有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0079', '四川鼎测信息工程有限公司', '邹勇', '13458493330', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0080', '四川鼎硕测绘有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0081', '四川丰平劳务有限公司', '刘晨熙', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0082', '四川凤舞九天商贸有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0083', '四川涪圣工程设计咨询有限公司', '蒲春国、马云', '15808168138、18284081246', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0084', '四川伽里略地质勘察技术服务有限公司', '赵金贤', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0085', '四川广蕴信息技术有限公司', '王志明', '15828203861', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0086', '四川国高工程项目管理有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0087', '四川汉盛源科技有限公司', '代维', '13880065566', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0088', '四川浩航慧图勘测规划设计有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0089', '四川皓土测绘有限公司', '钟一兵', '15882831185', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0090', '四川恒鑫源测绘有限公司', '李小林、周明勇', '15196631852', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0091', '四川华联锦宸工程勘察设计有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0092', '四川华兴捷运铁路工程有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0093', '四川汇棱水利电力勘测设计有限公司', '马超', '15881671999', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0094', '四川慧源鹏程工程设计有限公司', '何强', '18981211667', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0095', '四川吉协建筑劳务有限责任公司', '刘辰熙', '', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0096', '四川精灵轨测绘技术有限公司', '张念、李禺', '', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0097', '四川九凌工程勘察设计有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0098', '四川九零九工程勘察设计有限公司', '王文卓', '13981734179', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0099', '四川九岩数字科技有限公司', '冯鹏', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0100', '四川蓝盾科技有限公司', '唐谢茂', '15008276076', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0101', '四川磊茂工程技术服务有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0102', '四川力兴达工程勘测设计有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0103', '四川瓴昕工程管理有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0104', '四川鹏誉地信科技有限公司', '吴伟', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0105', '四川启盛信息科技有限公司', '邹勇', '13458493330', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0106', '四川谦剑测绘有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0107', '四川瑞路勘察设计有限公司', '李维涛、王总（王太发）', '18628360777、13408607300', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0108', '四川瑞图地信科技有限公司', '朱静', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0109', '四川森旺规划设计有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0110', '四川省地科环建检测技术有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0111', '四川省地质工程勘察院集团有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0112', '四川省地质矿产勘查开发局九〇九水文地质工程地质队', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0113', '四川省第三测绘院', '刘立强', '13878812112', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0114', '四川省科源工程技术测试中心有限责任公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0115', '四川世纪鸿图测绘有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0116', '四川世纪运德管道工程服务有限公司', '贾春华、陈默', '13540183995', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0117', '四川蜀地勘测规划服务有限公司', '孙亚东、蒋青峰', '18180676900', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0118', '四川蜀都善匠科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0119', '四川蜀鸿祥建筑工程有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0120', '四川蜀月信息技术有限公司', '彭德友', '13688182658', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0121', '四川顺杰信息技术有限公司', '殷浩、李明珠', '13458138000、13980803887', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0122', '四川斯内克信息技术有限公司', '朱静', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0123', '四川泰恒中勘察测绘有限公司', '李维涛、崔呈祥', '18628360777、17318994380', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0124', '四川天辰空间信息技术有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0125', '四川天合智汇地理信息科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0126', '四川天宇测绘有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0127', '四川天跃智创科技有限公司', '张斌', '', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0128', '四川田册科技有限公司', '陈存鸿、邹媛媛', '18780226389', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0129', '四川铁拓科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0130', '四川万易昌卓信息技术有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0131', '四川西南交大铁路发展股份有限公司', '王鑫', '15828642450', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0132', '四川新欣力测绘地理信息有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0133', '四川星辰测绘仪器有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0134', '四川兴蜀工程勘察设计集团有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0135', '四川轩航九域信息技术有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0136', '四川雅州检测有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0137', '四川冶勘设计集团有限公司（原四川省蜀通岩土工程公司）', '张华', '13550094375', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0138', '四川仪坤测绘有限公司', '邹勇', '13458493330', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0139', '四川邕江南湖遥感科技有限公司', '刘向东', '13668275672', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0140', '四川永鸿测绘有限公司', '夏时顺', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0141', '四川宇登工程勘测设计有限公司', '沈燕、物探王立战、季欣', '86198123', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0142', '四川御风行航空科技有限公司', '舒利', '18583968336', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0143', '四川缘启科技有限公司', '杜凤', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0144', '四川云地信息技术有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0145', '四川长品科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0146', '四川浙山建设工程有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0147', '四川甄然工程勘察设计有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0148', '四川正维测绘有限公司', '黄楷', '13540863739', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0149', '四川智绘地理信息科技有限公司', '曲仁明', '18604592666', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0150', '四川智绘云图测绘地理信息有限公司', '余游', '13882248446', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0151', '四川中规华投建设工程有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0152', '四川中科晟图信息技术有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0153', '四川中水成勘院测绘工程有限责任公司佛山分公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0154', '四川中水成勘院测绘工程有限责任公司重庆分公司', '李月', '18200139381', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0155', '四川中水成勘院工程物探检测有限公司', '王羿磊', '13518121892', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0156', '四川中宇方舟工程设计有限公司', '蒲洪政', '18983897379', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0157', '四川中正宏图信息技术有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0158', '四川众茂测绘有限公司', '马超、潘冰', '15881671999、15308319119', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0159', '四川众智益新信息科技有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0160', '松辽众鼎工程设计集团有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0161', '乌鲁木齐嘉时代测绘服务有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0162', '武汉海地测绘科技有限公司', '陈艳智', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0163', '武汉图匠空间信息技术有限公司', '高丹', '18986260379', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0164', '武汉中德天佑勘察设计有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0165', '武汉众诚数维信息技术有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0166', '西藏云丹机械租赁有限责任公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0167', '新疆富茂工程咨询有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0168', '新疆鑫岩锦程工程勘察有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0169', '新疆中恒基工程检测有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0170', '秀山县云鹏建筑劳务有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0171', '宜宾精鑫测绘有限公司', '彭经理', '18181645286', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0172', '宜宾文嘉林业科技服务有限公司', '李禺', '13980977233', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0173', '宜宾湛益工程勘察设计有限公司', '李禺', '13980977233', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0174', '云南浩图信达信息咨询中心', '宁瑶', '', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0175', '云南明东科技有限公司', '黄子荣', '13669714290', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0176', '云南省遥感中心', '刘朝海', '15812116818', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0177', '长江空间信息技术工程有限公司（武汉）', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0178', '浙江华东测绘地理信息有限公司', '柯敦达', '0571-56738900', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0179', '中城航遥（北京）信息工程有限公司', '王鑫蕊、王潘峰、贾晓杰', '15546163921、18596149386、18716018716', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0180', '中城数安（北京）工程管理有限公司', '韩志华', '18610313710', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0181', '中国电建集团西北勘测设计研究院有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0182', '中国电建集团中南勘测设计研究院有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0183', '中煤科工集团重庆研究院有限公司', '杨金虎', '13657678783', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0184', '中水成勘院（云南）建设发展有限公司', '宁瑶', '13980583883', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0185', '众咨国际工程咨询有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0186', '重庆曾爽文化传播有限公司', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0187', '重庆光大网络技术有限公司', '陈洪', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0188', '重庆厚耀信息技术服务中心', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0189', '重庆华筑建筑设计集团有限公司简阳分公司', '岳希军', '13980600197', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0190', '重庆市万达网际信息有限责任公司', '王羽、魏学渊', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0191', '重庆烨恒地理信息有限公司', '张小涛', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0192', '自然资源部第三地理信息制图院', '陈绍国', '13980859212', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0193', '自然资源部第三航测遥感院', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_partner` VALUES ('0194', '自然资源部四川测绘产品质量监督检验站', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);

-- ----------------------------
-- 56、cmc品牌项目表
-- ----------------------------
drop table if exists `cmc_brand_project`;
create table `cmc_brand_project`  (
  `project_id` 			char(19)  		not null 	 comment '项目id',
  `project_number` 		varchar(50)  	default null comment '项目编号',
  `project_name` 		varchar(100)  	default null comment '项目名称',
  `party_a_id`			varchar(50)		default null comment '甲方单位',
  `a_person`			varchar(20)		default null comment '甲方单位联系人',
  `a_phone`				varchar(50)		default null comment '甲方单位联系电话',
  `partner_id`			varchar(50)		default null comment '合作单位',
  `contact_person`		varchar(20)		default null comment '合作单位联系人',
  `telephone`			varchar(50)		default null comment '合作单位联系电话',
  `duration`			varchar(100)	default null comment '项目工期',
  `amount`				decimal(10,2)	default null comment '合同金额',
  `content`				text			default null comment '项目概况',
  `remark`				varchar(255)	default null comment '备注',
  `project_registrant`	bigint			default null comment '登记人',
  `register_time`		date			default null comment '登记时间',
  primary key (`project_id`)
) engine = innodb comment = 'cmc品牌项目表';

-- ----------------------------
-- 初始化-品牌项目表数据
-- ----------------------------
INSERT INTO `cmc_brand_project` VALUES ('1648881410240180078', '2019G02', '依安县第三次土地调查项目数据入库', '0208', '', '', '0064', '刘鑫', '15694348000', '', 830000.00, '', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881411678658679', '2019G03', '依安县第三次土地调查项目合同', '0208', '', '', '0053', '李云志', '15546311222', '', 6054760.00, '全部结束，3月16日', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881412494064316', '2019G06', '化成等5个重点乡镇及原青山乡等10个撤乡并镇地区不动产权籍调查项目测绘服务', '0003', '', '', '0122', '殷浩', '13458138000', '', 3708810.00, '在入库，计划4月底验收，3月16日，11月底验收。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881413415678164', '2019G07', '汶川县城市棚户区综合改造及配套基础设施建设项目基坑、新建主体建筑及周边建筑变形监测', '0190', '', '', '0138', '张华', '13550094375', '', 498000.00, '3月17日黄梅琳讲已经结束，可以不用理了，3月17日。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881414508823154', '2019G10', '德阳市罗江区自然资源局全域1：500数字化地形（地籍）测量和全域宅基地房地合一颁证项目（第二包）合同', '0045', '', '', '0100', '唐谢茂', '15008276076', '', 6527400.00, '1:500的已经结束，房地一体外业结束，3月16日，8月23日项目已处于公示期，10月底提交测绘局质检资料11月16日。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881415864742225', '2019G11', '甘孜州九龙县水利局子耳河河道管理范围划定工作服务项目合同书', '0098', '', '', '0079', '邹勇', '13458493330', '', 340447.00, '资料已经验收，最后一笔的发票已开，3月15日。归档资料5.26日提交给公司。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881416350756785', '2019G12', '重庆市旅游资源普查技术分包服务合同', '0279', '', '', '0154', '李月', '18200139381', '', 0.00, '项目结束，处于收款阶段。3.17', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881417922557636', '2021G21', '青川县河湖管理范围划定（一包）项目劳务协议', '0128', '', '', '0083', '蒲春国、马云', '18284081246', '', 724140.00, '由于业主原因还未开展工作。4.19；7.21日了解到项目已经出报告了。出界桩制作阶段，10.21。', 'CMC3：G-21021', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881418264249117', '2021G22', '万达地理信息系统 V5.0软件销售合同书（B25道路及配套工程排水管道内窥试验检测项目）', '0269', '', '', '0191', '王羽、魏学渊', '', '', 21369.00, '', 'CMC3：G-21022', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881419943175231', '2021G24', '古蔺县河湖水域岸线管理范围划定项目（04包）测绘合同', '0070', '', '', '0193', '陈绍国', '', '', 32500.00, '', 'CMC3：G-21024', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881420360647692', '2021G26', '青羊区石人公园地下停车场项目基坑工程监测技术服务协议', '0017', '', '', '0014', '王小刚', '', '', 148300.00, '', 'CMC3：G-21026', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881421117518308', '2021G27', '古蔺县河湖水域岸线管理范围划界项目技术劳务协议', '0070', '', '', '0146', '', '', '', 339314.00, '', 'CMC3：G-21027', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881422695473154', '2021G29', '三台县柳溪河等8条河流河道管理范围划定服务项目劳务服务协议', '0144', '', '', '0158', '马超、潘冰', '15881671999、15308319119', '', 1630520.00, '项目已经结束，现在处于收款阶段。（11月1日）11月8日收到了资料。', 'CMC3：G-21029', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881423612865231', '2021G31', '万达地理信息系统 V5.0软件销售合同书（金开大道改造工程道路排水管道内窥检测项目）', '0269', '', '', '0191', '魏学渊', '', '', 30509.00, '', 'CMC3：G-21031', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881424471957124', '2021G32', '苍溪县基础测绘“十四五”规划编制项目劳务服务协议', '0011', '', '', '0094', '何强', '18981211667', '', 137900.00, '报告已经编制完成，等待上会讨论，2021年11月25日', 'CMC3：G-21032', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881425971828487', '2021G33', '成都市成华区地下管线普查更新探测服务（第2包）技术服务协议', '0020', '', '', '0149', '', '', '', 6810000.00, '', 'CMC3：G-21033', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881426709662854', '2018G01', '长宁县水务局小型水利工程确权登记和数据库建设服务项目技术服务合同书', '0218', '', '', '0171', '彭经理', '18181645286', '', 596000.00, '项目已经结束，正在办理收款。4月2日', '项目已完成，补登记。', 23, '2022-04-22');
INSERT INTO `cmc_brand_project` VALUES ('1648881427604905372', '2018G02', '阿勒泰地区地方农垦国有农牧场土地使用权确权登记发证工作（吉木乃喀尔交牧场）第十一标段技术服务采购合同', '0001', '', '', '0013', '代倩', '18081893553', '', 6312569.00, '项目已经结束，在办理尾款。', '项目已完成，补登记。', 23, '2022-04-22');
INSERT INTO `cmc_brand_project` VALUES ('1648881428994221762', '2018G03', '会理县农村土地承包经营权确权登记颁证项目合同补充协议', '0092', '', '', '0129', '陈存鸿', '18780226389', '', 4235950.73, '全部结束，3月15日。', '项目已完成，补登记。', 23, '2022-04-22');
INSERT INTO `cmc_brand_project` VALUES ('1648881429231667186', '2018G04', '青海省第三次全国土地调查项目 （海西州8县）/（包3）项目合同书', '0130', '', '', '0179', '韩子华', '18610313710', '', 2756800.00, '这个月开展验收，3月15日，8月17日了解到已经通过验收，项目结束了。归档资料已经提交给公司，8.23日。已经结束。', '项目已完成，补登记。', 23, '2022-04-22');
INSERT INTO `cmc_brand_project` VALUES ('1648881430481233607', '2018G05', '中山市第三次全国土地调查项目（包组三：监理服务）', '0259', '', '', '0153', '刘浩正', '13928623777', '', 0.00, '结束了，21年3月15日。', '项目已完成，补登记。', 23, '2022-04-22');
INSERT INTO `cmc_brand_project` VALUES ('1648881431775772126', '2018G06', '新邱区第三次国土调查项目四包合同', '0066', '', '', '0179', '王潘峰、贾晓杰', '18596149386、18716018716', '', 179164.00, '等待验收，3月15日，8月17日仍然等待验收。11月15日仍然等待验收中。', '项目已完成，补登记。', 23, '2022-04-22');
INSERT INTO `cmc_brand_project` VALUES ('1648881432128795856', '2018G08', '第三次全国国土调查成果国家级内业核查（第23包）技术服务合同', '0256', '', '', '0179', '韩志华', '18610313710', '', 1541600.00, '结束。', '项目已完成，补登记。', 23, '2022-04-22');
INSERT INTO `cmc_brand_project` VALUES ('1648881433474717767', '2020G21', '三台县河道管理范围划定项目', '0144', '', '', '0158', '马超', '15881671999', '', 7836790.00, '进展顺利，工期都是按照省市文件要求进行。3与月15日，6月30日完成验收应该没有问题（5.17）。入库报告已经完成，结束。', 'CMC3:G-20021', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881434416421278', '2020G22', '新建重庆至黔江铁路站前工程CQQJZ-5标段精测网复测', '0263', '', '', '0096', '张念', '17761261726', '', 2491110.00, '开始第三复测，一共要测9次，每半年测量一次，3月15日。5月6日三期结束', 'CMC3:G-20022', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881435524619393', '2020G24', '工程勘察技术咨询服务合同（深溪沟消力池及泄洪洞进出口水下检测及检查+溪洛渡水电站进水口及尾水河道地形', NULL, '', '', '0155', '王羿磊', '13518121892', '', 2306411.00, '', 'CMC3:G-20023', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881436608982252', '2020G25', '南网数研院航飞影像服务建设（包1 粤北）', '0074', '', '', '0043', '贾春华', '', '', 1717543.11, '3月12日贾春华讲早结束了。', 'CMC3:G-20024', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881437968038882', '2020G27', '四川省绵阳市三台县河湖保护中心“三台县河道管理范围划定”', '0144', '', '', '0193', '', '', '', 5000.00, '黄梅琳已处理完毕', 'CMC3:G-20026', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881438491896336', '2020G28', '四川省绵阳市三台县河湖保护中心三台县柳溪河等8条河流河道管理范围划定服务项目', '0144', '', '', '0193', '', '', '', 37500.00, '黄梅琳已处理完毕', 'CMC3:G-20027', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881439888862850', '2020G30', '两江新区龙兴、鱼复园区自来水管线及消火栓调查项目', '0275', '', '', '0191', '王羽', '13509490869', '', 562493.00, '资料已经提交，结算办理阶段（3月15日）', 'CMC3:G-20029', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881440824314687', '2020G31', '巴南区一品街道金田村环山公路1:500地形图测绘、保税港（水港、空港）片区市政消火栓核查测绘成图项目、江', '0267,0271,0276', '', '', '0191', '王羽', '13509490869', '', 603556.00, '2020年5月项目已经结束，现在尾款未收到。（2021年3日）', 'CMC3:G-20030', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881441941104886', '2020G33', '金沙江金沙水电站厂坝工程施工期安全监测工程项目坝前泥沙淤积及坝下游冲刷监测水下横断面测量技术服务协议', '0217', '', '', '0014', '王小刚', '13880716273', '', 602000.00, '已经结束。', 'CMC3:G-20032', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881442940451734', '2020G34', '南部县水务局南部县菜子河等15条规模以下河流河道管理范围划定服务项目', '0116', '', '', '0029', '代维', '13880065566', '', 1591900.00, '评审、入库已经完成，下一步进行埋桩，工期都正常。8月3日项目全部结束，资料已经提交公司归档。', 'CMC3:G-20033', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881443401062469', '2020G35', '南部县水务局南部县菜子河等15条规模以下河流河道管理范围划定服务项目', '0116', '', '', '0087', '代维', '13880065566', '', 1500000.00, '评审、入库已经完成，下一步进行埋桩，工期都正常。8月3日项目全部结束，资料已经提交公司归档。', 'CMC3:G-20034', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881444781630921', '2019G01', '宜宾市叙州区第三次全国国土调查项目', '0211', '', '', '0085', '王志明', '15828203861', '', 6909000.00, '项目结束，等待验收；处于收款阶段。', '本合同为总价合同，甲方收取委托方主合同（￥735.00万元）价款的6%作为本项目的管理费，所有税金由乙方承担', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881445489756105', '2022G09', '凉山州自然资源局2021年度国土变更调查项目劳务协议', '0104', '蒋杰', '13882282884', '0124', '崔呈祥', '17318994380', '', 317050.00, '凉山州涉及17个县（市），按照自然资源部办公厅《关于开展2021年度全国国土变更调查工作的通知》和《土地调查条例》相关规定，凉山州涉及17个县（市）一是按照2021年度国土变更调查工作总体部署和具体要求，收集相关管理资料，开展技术培训，做好前期准备工作；二是按照相关保密要求，配合州自然资源局领取国家、省下发的各类基础数据，并下发至17县（市）；三是开展变更调查过程中对各县市提交成果开展核查工作，协助州自然资源局向省厅提交变更调查成果；四是配合做好其它有关工作。对凉山州所辖区域内17县（市）逐级核查，掌握2021年度土地利用的变化情况，满足当前自然资源管理工作的需要，更新土地利用现状数据库，保障国土调查成果的现势性和准确性。', '', 23, '2022-04-12');
INSERT INTO `cmc_brand_project` VALUES ('1648881446228613176', '2019G04', '石棉县国土资源局第三次全国国土调查监理服务采购项目技术服务合同书', '0154', '', '', '0034', '王薇', '15608043005', '', 131400.00, '工作结束，款项没收完，资料没有提交。3月16日。预计11月25日验收，11月15日。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881447286760361', '2019G08', '2019年贵阳高铁工务段贵广客专精测网复测', '0254', '', '', '0132', '王鑫', '15828642450', '', 1863565.12, '全部结束。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881448397275969', '2019G13', '溪洛渡水电站进水口及尾水河道地形测量技术服务合同', '0147', '', '', '0155', '王弈磊', '13518121892', '', 0.00, '结束了。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881449965355429', '2019G14', '第三次全国国土调查成果国家级外业核查（包18）项目技术服务合同', '0244', '', '', '0179', '韩志华', '18610313710', '', 800000.00, '等待验收，8月17日任然等待验收。已经结束11月16日', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881450264298208', '2019G15', '道孚县河湖管理范围划定服务', '0069', '', '', '0079', '邹勇', '13458493330', '', 182712.00, '完成了80%，界桩未埋设，4.25开始埋桩。已经结束。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881451979583478', '2019G16', '四川省李家岩水库工程永久界桩测设及埋设工程服务', '0027', '', '', '0118', '蒋青峰', '18180676900', '', 236600.00, '结束了。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881452460389261', '2019G17', '武隆农村土地确权监理', '0277', '', '', '0156', '蒲洪政', '18983897379', '', 783200.00, '等待验收阶段，8月17日还在等待验收，11月16日还在等待验收。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881453897870260', '2019G19', '三台县河道管理范围划定项目技术服务合同', '0144', '', '', '0158', '潘冰', '15308319119', '', 7836790.00, '进展顺利，工期都是按照省市文件要求进行。3与月15日（在2020年的登记表里面有）已结束', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881454447058527', '2019G20', '南岸区2018-2019年新建消火栓测绘成图及点表制作合同', '0274', '', '', '0191', '王羽', '13509490869', '', 0.00, '已经结束了。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881455580228892', '2019G21', '枢纽坝前及船闸泥沙淤积测量服务', NULL, '', '', '0155', '王弈磊', '13518121892', '', 0.00, '结束了。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881456419258795', '2019G23', '雅鲁藏布江冷达水电站勘测定界项目', '0224', '', '', '0089', '钟一兵', '15882831185', '', 500000.00, '即将结束，现阶段的工作已经完成，没有验收11月16日。因工作有增加，2022年与业主方签订了补充协议，补充协议金额30万元。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881457583018339', '2019G24', '美姑县农村集体土地确权登记发证项目（2012）', '0112', '', '', NULL, '江国政', '13708077446', '', 0.00, '8月17日与江国政联系，他讲他一直都在关注，项目验收已经通过。资料提交完成。9月30日收尾款。', '因工作量有增加，2022年2月补办《美姑县农村集体土地所有权确权登记增加小面积宗地补充协议》，金额26万元', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881458196695104', '2019G26', '西昌市农业局农村土地承包经营权确权登记建库、鉴定监察验收项目', '0195', '', '', '0026', '黄振戈', '18981963993', '', 938400.00, '工作基本完成。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881459868646458', '2020G36', '三台县“十四五”水利发展和水利国土空间等3个规划编制（只有空间规划没有完成）', '0146', '', '', '0093', '马超', '15881671999', '', 2863276.42, '方案出来了（河道划界和国管水利工程划界）等待审定。（3月15日）。', 'CMC3:G-20035', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881460870968039', '2020G01', '南岸区2018-2019年新建消火设备管网项目和两江新区2019年新增消防设备合同', '0274,0268', '', '', '0191', '王羽', '13509490869', '', 80750.00, '2020年已经结束。', 'CMC3:G-20001', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881461569098768', '2018G07', '成都市大邑县第三次全国国土调查服务采购项目', '0041', '', '', '0107', '李维涛、王总（王太发）', '18628360777、13408607300', '', 3855600.00, '已经全部结束，2021.2已支付尾款。', '项目已完成，补登记。', 23, '2022-04-22');
INSERT INTO `cmc_brand_project` VALUES ('1648881462113575151', '2020G02', '2020年贵阳高铁工务段贵广客专精测网复测劳务分包合同', '0254', '', '', '0132', '王鑫', '15828642450', '', 1397212.50, '2020年9月已经结束。', 'CMC3:G-20002', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881463396836849', '2020G04', '甘洛县农村“房地一体”宅基地和集体建设用地确权登记项目', '0067', '', '', '0148', '黄楷', '13540863739', '', 4206390.00, '3月11日了解到外业结束，进入打证签章阶段。7月5日正在进行州上检查。等待州上验收9.15。11月初过程检查，要整改。', 'CMC3:G-20004', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881464212970625', '2020G05', '第三次全国国土调查成果国家级外业核查（包18）项目技术服务合同', '0244', '', '', '0180', '韩志华', '18610313710', '', 1026000.00, '工作已经结束，等待验收。（2021年3月15）', 'CMC3:G-20005', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881465361472653', '2020G06', '高分立体卫片、单片存档数据采购', '0241', '', '', '0003', '宁瑶', '13980583883', '', 329608.00, '已经结束。（2021年3月15）', 'CMC3:G-20006', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881466438427009', '2020G07', '四川省德昌县茨达、铁炉风电场工程地形图测绘技术服务合同', '0226', '', '', '0142', '物探王立战、季欣', '86198123', '', 86046.40, '合同要求2020年6月完成', 'CMC3:G-20007', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881467963930212', '2020G09', '南海宗地整理入库、南海区九江镇宅改测量审核技术服务合同', '0060', '', '', '0040', '刘浩正', '13928623777', '', 313471.00, '是长期性项目，20年的已经结束，21年的即将签合同。2021年3月15日', 'CMC3:G-20009', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881468566500535', '2020G10', '万达地理信息系统 V5.0软件销售合同（巴南区一品街道1:500电子地图地理信息项目）', '0002', '', '', '0191', '魏学渊', '13808309476', '', 112755.00, '', 'CMC3:G-20010', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881469719926037', '2020G11', 'ECARTO河长制数据编辑建库系统', '0072', '', '', '0193', '涪圣公司蒲春国利州区河湖划界项目', '', '', 10000.00, '黄梅琳已处理完毕', 'CMC3:G-20011', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881470559297696', '2020G13', '道孚县瓦依沟河、九龙县子耳河、三岩龙沟河道管理范围划定服务', '0069', '', '', '0193', '鼎测、邹勇', '13458493330', '', 15000.00, '黄梅琳已处理完毕', 'CMC3:G-20013', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881471818055704', '2020G14', '内江市市中区农村不动产登记外业测绘服务', '0121', '', '', '0019', '江超', '13548114060', '', 5531625.00, '已经进展了一半（3月15日）；进展缓慢9月9日。', 'CMC3:G-20014', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881472652531082', '2020G17', '会理县“房地一体”农村宅基地和集体建设用地确权登记发证项目采购合同（第三包）', '0093', '', '', '0148', '黄楷', '13540863739', '', 5114608.40, '3.15外业在进行宗地测量，7月5日已经进入签字阶段。等待州上验收9.15。过程检查，还要整改。', 'CMC3:G-20017', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881473403943359', '2020G18', '阳山县“房地一体”农村不动产登记发证工作服务项目（片区4）', '0206', '', '', '0089', '钟一兵', '15882831185', '', 2505600.00, '签字确认阶段，进展顺利。3月15日，5月底进行市级验收。5.11，8.31日了解：4--7月由于广东省厅规则变化，工作进场停止，7月底才陆续开展工作，目前工作进度已完成80%。收款情况未达到第二笔80%付款要求，10月25日-28日进行市级验收，验收通过。', 'CMC3:G-20018', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881474787587726', '2020G20', '万达地理信息系统V5.0（两江新区2020年新增消防设备）', '0275', '', '', '0191', '魏学渊', '13808309476', '', 214700.00, '已经结束', 'CMC3:G-20020', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881475627496812', '2020G38', '广元市利州区河湖岸线划定服务', '0072', '', '', '0083', '蒲春国', '15808168138', '', 2896560.00, '13条河流现已经提交了7条河的报告初稿，等待审核，界桩还未启动。4.19；8月25日联系马云讲工作已经完成50%。正在埋设界桩，全部结束，资料归档提交到公司，10.11', 'CMC3:G-20037', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881476725078246', '2020G40', '苍溪县25条河流河湖管理范围划界服务（第二包）项目', '0011', '', '', '0083', '蒲春国', '15808168138', '', 1249000.00, '报告已经提交初稿待审核，界桩结束，验收通过，全部结束等待收款。10.20', 'CMC3:G-20039', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881477873513559', '2021G01', '蒲江县城区19.37平方千米1:500数字线划图、数字正射影像图和更新项目技术劳务合同', '0126', '伍鑫', '13408414115', '0121', '彭德友', '13688182658', '', 5221700.00, '数据入库，外业正在埋桩，埋桩5月份结束，项目结束预计6月底。3月15日；8.12了解到项目已经全部结束，归档资料本月15日弄完。', 'CMC3:G-21001', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881478117688193', '2022-002', '西藏拉萨工程治理体系建设5个子项目治理效果监测项目技术协作协议', '0194', '范源', '18989016602', '0098', '王文卓', '13981734179', '', 987553.00, '', '', 23, '2022-04-12');
INSERT INTO `cmc_brand_project` VALUES ('1648881479184946642', '2022-001', '品牌项目001', '0177', '王丽娟', '1389900001', '0114', '刘立强', '13878812112', '测试项目', 0.00, '2022-02-25', '李胜才', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881480428200362', '2022-003', '林权档案电子化及存量数据整合建库采购项目劳务协议', '0212', '胡届', '13340650796', '0173', '李禺', '13980977233', '', 1238638.00, '', '', 23, '2022-04-12');
INSERT INTO `cmc_brand_project` VALUES ('1648881481416233390', '2022-004', '林权档案电子化及存量数据整合建库采购项目劳务协议', '0212', '胡届', '13340650796', '0172', '李禺', '13980977233', '', 1239336.00, '', '', 23, '2022-04-12');
INSERT INTO `cmc_brand_project` VALUES ('1648881482178338530', '2022-005', '阳山县粮食生产功能区调整补划项目技术服务协议', '0205', '', '', '0089', '钟一兵、李禺', '13980977233、15882831185', '', 48610.00, '', '', 23, '2022-04-12');
INSERT INTO `cmc_brand_project` VALUES ('1648881483749455008', '2022-006', '清城区粮食生产功能区调整补划项目技术服务协议', '0134', '', '', '0089', '钟一兵、李禺', '13980977233、15882831185', '', 48188.00, '', '', 23, '2022-04-12');
INSERT INTO `cmc_brand_project` VALUES ('1648881484580441746', '2022-007', '重庆市永川区侨立水务有限公司城市供水管线补勘补测项目技术服务协议', '0278', '', '', '0117', '陈默', '13540183995', '', 97028.00, '', '', 23, '2022-04-12');
INSERT INTO `cmc_brand_project` VALUES ('1648881485770239471', '2021G02', '三台县“十四五”水利发展和水利国土空间等3个规划编制（只有空间规划没有完成）', '0146', '', '', '0158', '马超', '15881671999', '', 1520973.80, '项目已经结束，现在处于收款阶段。（3月15日）', 'CMC3:G-21002', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881486613536461', '2021G03', '简阳市50平方公里及以上河湖划界项目', '0095', '', '', '0028', '岳希军', '13980600197', '', 4953688.00, '工期跟甲方的要求是一致的，现在外业已经结束，易地扶贫办证阶段，档案收集完成75%，11月15日。', 'CMC3:G-21003', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881487602914039', '2021G04', '简阳市50平方公里及以上河湖划界项目', '0095', '', '', '0190', '岳希军', '13980600197', '', 5221700.00, '数据入库阶段，3月16日；外业已经结束，等待入库9月9日', 'CMC3:G-21004', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881488468441673', '2021G05', 'G217线独山子至巩乃斯段控制及成图项目劳务采购协议', '0170', '杨洪', '', '0174', '宁瑶', '', '', 1520973.80, '由于业主原因还未开展工作。4.19；7.21日了解到项目已经出报告了。出界桩制作阶段，10.21。', 'CMC3:G-21005', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881489704367906', '2021G07', '苍溪县25条河流河湖管理范围划界服务（第二包）项目劳务合同', '0009', '', '', '0083', '蒲春国', '15808168138', '', 1249347.00, '', 'CMC3:G-21007', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881490772160831', '2021G09', '邛崃市地下管线普查成果更新探测服务项目技术劳务合同', '0136', '', '', '0141', '夏时顺', '', '', 1748046.00, '', 'CMC3：G-21009', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881491149208612', '2021G10', '红原县规模以下河流管理保护范围划界项目劳务协作合同', '0088', '', '', '0128', '张斌', '', '', 2417800.00, '', 'CMC3：G-21010', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881492697082664', '2021G11', '新建重庆至黔江铁路站前工程CQQJZQ-6标段精测网复测技术劳务协议', '0264', '', '', '0096', '张念、李禺', '', '', 1966504.00, '', 'CMC3：G-21011', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881493800980185', '2021G13', '甘孜州6条州级河道管理范围划定服务测绘合同', '0068', '', '', '0193', '陈绍国', '', '', 35000.00, '', 'CMC3：G-21013', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881494246157118', '2021G14', '华能大连市庄河海上风电场址Ⅳ1（350MW）项目扫海工程技术劳务协议', '0252', '', '', '0155', '王羿磊', '', '', 916688.00, '', 'CMC3：G-21014', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881495341470081', '2021G16', '成都市武侯区地下管线普查成果更新服务劳务协议', '0030', '', '', '0124', '李维涛', '18628360777', '', 17620900.00, '', 'CMC3：G-21016', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881496732458224', '2021G17', '古蔺县河湖水域岸线管理范围划界项目技术劳务协议', '0070', '', '', '0112', '', '', '', 1267600.00, '', 'CMC3：G-21017', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881497897742576', '2021G18', '彭州市地下管线普查成果更新服务项目劳务协议', '0124', '', '', '0016', '程海涛', '', '', 1564990.00, '', 'CMC3：G-21018', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881498492942157', '2022G24', '新建田师府至桓仁铁路DK69+125—DK69+352岩堆区域加固防护安全监测技术服务合同', '0255', '杨德全', '024-62062821', NULL, '苗光驰', '13082454595', '', 0.00, '', '2022.5.25登记项目，暂无委外合同', 23, '2022-05-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881499670246412', '2022G26', '天府大道北延线（成都段）项目新都区范围内基本农田补划方案编制、听证及评估论证等6个项目技术服务协议', '0013,0084,0089', '', '', '0014', '王小刚', NULL, '', 1389960.00, '', '公司联系人：贾春华、李胜才', 23, '2022-08-29');
INSERT INTO `cmc_brand_project` VALUES ('1648881500805652766', '2022G27', '四川省长葫灌区一张图建设项目劳务合作协议', '0176', '余旭', '19982946505', '0072', '邹勇', '13458493330', '', 222324.00, '', '公司联系人：贾春华、李胜才', 23, '2022-08-29');
INSERT INTO `cmc_brand_project` VALUES ('1648881501999970158', '2022G28', '大熊猫国家公园什邡片区勘界立标政府采购合同', '0153', '', '', '0072', '邹勇', '13458493330', '', 754124.00, '', '公司联系人：贾春华、李胜才', 23, '2022-08-29');
INSERT INTO `cmc_brand_project` VALUES ('1648881502344420872', '2022G29', '自贡市水系连通项目用地土地勘测测绘采购项目劳务合作协议', '0280', NULL, '', '0139', '邹勇', '13458493330', '', 170369.00, '', '公司联系人：朱静', 23, '2022-08-29');
INSERT INTO `cmc_brand_project` VALUES ('1648881503914685758', '2022G31', '仁怀市北部新城-南部新城片区航飞影像及1：500地形图测绘空三加密、影像图及数据编辑技术服务', '0247', 'XXX', '0851-84815058', '0193、0141', '刘向东', '13668275672', '1、协议签订后，2日内组织乙方专业技术人员开展工作，15日内完成成果资料并提交，如遇不可抗力工期顺延。', 1051264.00, '测区范围位于东经106°15’~106° 28’、北纬27°41’~27。53’之间，完成航空摄影范围线内约77平方千米空三加密，快拼影像图，内业采集，外业修补测，数据编辑工作。', '自然资源部第三地理信息制图院905580元+四川邕江南湖遥感科技有限公司145684元', 23, '2022-11-08');
INSERT INTO `cmc_brand_project` VALUES ('1648881504538918971', '2022G32', '甘孜藏族自治州水旱灾害风险普查（山丘区中小河流洪水淹没图编制', '0068', NULL, NULL, '0150', '余游', '13882248446', '合同签订且乙方收到甲方提供的资料后 60 天内完成甘孜藏族自治州水旱灾害风险普查（山丘区中小河流洪水淹没', 2084355.00, '目前工作正在开展。', '', 23, '2022-11-18');
INSERT INTO `cmc_brand_project` VALUES ('1648881505508258294', '2019G05', '甘孜藏族自治州色达县国土资源局第三次全国国土调查服务采购项目合同书', '0148', '', '', '0079', '邹勇', '13458493330', '', 7939600.00, '工作基本结束（21年3月15日），4.25，收尾款阶段，资料已提交给公司2021.12.21', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881506262384877', '2019G25', '德昌县农村土地承包经营权确权登记服务采购项目（2016）', '0044', '', '', '0089', '钟一兵', '15882831185', '', 1313176.00, '正常预计今年底结束，11月16日。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881507341216505', '2020G26', '南网数研院航飞影像服务建设（包2 粤西）', '0074', '', '', '0045', '贾春华', '', '', 1717543.11, '3月12日贾春华讲早结束了。', 'CMC3:G-20025', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881508884235744', '2020G29', '采购证书合同', '0206', '', '', '0170、0042', '', '', '', 22500.00, '黄梅琳已处理完毕', 'CMC3:G-20028', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881509916967985', '2020G37', '锦江区农村乱占耕地建房问题摸排工作采购合同', '0025', '', '', '0141', '夏时顺', '15882386284', '', 1801360.00, '前期50%摸底工作结束了，还有50%的工作等待省上安排后再进行，3与月15日，2021年底结束，11月17日。', 'CMC3:G-20036', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881510276093538', '2020G39', '宁夏1:2000基础地理信息数据库及“多库合一”项目数字线划图成果质量检验协议', '0123', '', '', '0062、0078', '未支付', '', '', 15763.00, '已经结束', 'CMC3:G-20038', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881511419224144', '2017G01', '雷波县农村土地承包经营权确权登记测绘调查及颁证技术服务', '0101', '李小林、周明勇', '15196631852', '0090', '李小林、周明勇', '15196631852', '', 0.00, '截止2023年5月，本项目已经完成并项甲方申请了尾款的支付。', '项目已完成，补登项目信息。', 23, '2023-05-30');
INSERT INTO `cmc_brand_project` VALUES ('1648881512995948224', '2021G34', '大竹县城乡规划编制中心大竹县城区地下管网普查项目合同技术服务协议', '0042', '', '', '0145', '', '', '', 3694600.00, '', 'CMC3：G-21034', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881513154226108', '2021G35', '2021年佛山项目技术服务技术劳务协议', NULL, '', '', '0040', '刘浩正', '', '', 753013.50, '', 'CMC3：G-21035', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881514827536484', '2021G37', '毕节市大方县星宿乡不动产调查服务', '0035', '', '', '0047', '（大方县人民政府政务大厅）苏君伟、赵总', '13885779934、18286081587、13885191108', '', 0.00, '数据入库阶段，3月16日；外业已经结束，等待入库9月9日', '', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881515168400923', '2022G11', '浙江宁海抽水蓄能电站上下库库容曲线测量服务技术服务合同', '0221', '葛工', '15867014469', '0178', '柯敦达', '0571-56738900', '', 158818.00, '', '2022.5.25登记项目，正在办理委外合同', 23, '2022-05-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881516151982973', '2022G12', 'JX水电站土地报件审核审批服务合同', '0089', '冯兴林', '18785117605', NULL, '王小刚', '13880716273', '', 0.00, '', '2022.5.25登记项目，暂无委外合同', 23, '2022-05-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881517792621377', '2022G13', 'JX水电站征占草地审核审批服务合同', '0089', '冯兴林', '18785117605', NULL, '王小刚', '13880716273', '', 0.00, '', '2022.5.25登记项目，暂无委外合同', 23, '2022-05-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881518705623000', '2022G14', 'JX水电站征占林地审核审批服务合同', '0089', '冯兴林', '18785117605', NULL, '王小刚', '13880716273', '', 0.00, '', '2022.5.25登记项目，暂无委外合同', 23, '2022-05-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881519445697524', '2022G15', '南岭国家公园南水片区生态环境系统保护修复工程-乳源瑶族自治县城区废旧矿山环境修复治理工程竣工图编制及', '0142', '', '', NULL, '周全', '13688460154', '', 0.00, '', '2022.5.25登记项目，暂无委外合同', 23, '2022-05-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881520372638126', '2022G17', '桂城街道夏南一与平西（兴仁村、蓬涌村、马根村、格涌村）旧村改造项目基础数据初查阶段技术核查测绘合同', '0055', '', '', '0040', '刘浩正', '13928623777', '', 135986.00, '', '2022.5.25登记项目', 23, '2022-05-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881521618815296', '2022G18', '雅鲁藏布江冷达水电站勘测定界项目-补充协议', '0224', '周瑞', '周瑞', NULL, '钟一兵', '18054784560', '', 0.00, '', '2022.5.25登记项目，暂无委外合同', 23, '2022-05-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881522394977276', '2022G20', '阿坝金川220kV输变电工程技术服务合同', '0084', '', '', NULL, '王小刚', '13880716273', '', 0.00, '', '2022.5.25登记项目，暂无委外合同', 23, '2022-05-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881523302668523', '2023G06', '天津华电宝坻黄庄12万千瓦风电项目土地测绘技术服务合同', '0188', '巩太义', '18526676096', '186', '李木', '13881741548', '合同工期自合同签订之日起90天内。', 0.00, '天津华电宝坻黄庄12万千瓦风电项目土地测绘技术服务。乙方完成天津华电宝坻黄庄12万千瓦风电项目包括勘测定界、地籍测绘、出让测绘、实测地形图等土地出让阶段全部测绘技术服务的相关工作，取得所需要的政府主管部门批复，配合甲方完成土地征租等相关工作，确保项目顺利开工。', '甲方签入合同CMC2：G-23011，金额为640000.00元。', 23, '2023-09-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881524169839888', '2023G08', '2022年度乳源瑶族自治县自然保护地自然资源统一确权登记项目', '0143', '黎超', '18202833529', '0070', '谭振晖', '18128913000', '合同签订后，乙方须在 2022 年 12 月 31 日前完成全部确权登记工作（最终完成时间以乳源瑶族自治县自然资源', 0.00, '合同总金额为1,748,000.00 元，我公司占比为18%，计314640元。合同签订后，乙方须在 2022 年 12 月 31 日前完成全部确权登记工作（最终完成时间以乳源瑶族自治县自然资源局要求为准）。', '', 23, '2023-10-18');
INSERT INTO `cmc_brand_project` VALUES ('1648881525998900827', '2023G14', '乳源瑶族自治县2022年度国土变更调查项目', '0143', '黎超、杨浩', '18218525354', '0070', '钟开伟、谭振晖', '18128913000', '2023年9月1日前，完成乳源瑶族自治县2022年度国土变更调查工作（含成果提交、整改和完善工作）。具体完成时', 0.00, '', '签入合同为CMC2：G-23001，金额60万元。', 23, '2023-12-14');
INSERT INTO `cmc_brand_project` VALUES ('1648881526426133551', '2023G01', '西部沿海高速公路阳江南联络线（阳东至阳江港高速公路）工程项目地形图测绘', '0204', '汪小兰', '15121250295', '0047', '赵伟', '13595100604', '合同签订后6个月内提交验收合格的数据成果；后续服务2年。', 1212288.02, '西部沿海高速公路阳江南联络线（阳东至阳江港高速公路）工程项目地形图测绘项目全线1:2000地形图（激光雷达成图）、基础控制测量、纵断面测量、横断面测量、桥梁高等级控制、水下地形图测量等设计测量工作。', '', 23, '2023-01-16');
INSERT INTO `cmc_brand_project` VALUES ('1648881527138532207', '2020G08', '大庆石油管理局职工家属区分离移交物业、供热系统维修改造工程测绘现状地形图（第五标段）建设工程勘察合同', '0037', '', '', '0053', '李云志', '15546311222', '', 242637.82, '工程已经结束，已经结算70%，尾款待收。（2021年3与月15日），', 'CMC3:G-20008', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881528994118884', '2021G06', '剑阁县农村房屋一体和集体建设用地确权登记项目（第四标段）劳务协议合同', '0096', '', '', '0122', '李明珠', '13980803887', '', 1639072.00, '5月26日补登，项目已经结束在11月5日。', 'CMC3:G-21006', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881529132609043', '2021G15', '成都高新区地下管线普查成果更新服务项目全野外探测劳务协作测绘工程劳务分包协议', '0014', '', '', '0081', '刘晨熙', '', '', 1329187.00, '', 'CMC3：G-21015', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881530784030826', '2021G28', '彭州市1：500系列数字测绘产品生产服务项目（第4包）技术劳务协议', '0124', '', '', '0100', '唐谢茂', '', '', 4287200.00, '', 'CMC3：G-21028', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881531813003546', '2023G04', '普格县集体土地所有权登记成果更新汇交项目技术服务', '0127', '伍先生', '0834-4776946', '0058', '何进', '18113224200', '2023年9月底前根据《不动产登记数据库标准》《集体土地所有权确权登记成果汇交指南》等技术规范要求，将现', 1289746.00, '甲方支付方式如下：1、签订合同后，完成资料收集、整理、现场工作地图制作，并制定了项目实施方案后，支付合同金额的35%；2、完成所有项目外业调查，将调查成果矢量化，形成完善的成果图件后，支付合同金额的35%；3、完成数据库建设，并通过甲方（县级主管部门）及州级主管部门的验收后支付合同金额的20%。4、项目通过省级及相关主管部门的整体验收后支付合同金额的10%。', '', 23, '2023-08-14');
INSERT INTO `cmc_brand_project` VALUES ('1648881532128204385', '2023G09', '彭州市2022年国土变更调查监理项目合同书', '0124', '', '', '0023', '陈存鸿', '18780226389', '自合同签定之日起至2022年度国土变更调查项目建设完毕并通过最终验收。2022年度国土变更调查项目计划于2023', 167926.00, '', '甲方签入合同编码CMC2：G-23004，金额19.4万元', 23, '2023-11-10');
INSERT INTO `cmc_brand_project` VALUES ('1648881533668195897', '2023G10', '三台县2021年灾毁农田修复项目田型调整测量单位测绘', '0145', '', '', '0158', '马超', '15881671999', '测量完成期限从合同签定算起不超过30日历天。', 246188.80, '', '甲方签入合同编码CMC2：G-23008，金额26.9万元', 23, '2023-11-10');
INSERT INTO `cmc_brand_project` VALUES ('1648881534504873335', '2023G11', '阆中市农村产权制度改革“确权颁证”测绘服务采购项目（第六标段）', '0223', '', '', '0129', '陈存鸿', '18780226389', '', 3721473.36, '', '甲方签入合同编码CMC2A16007，金额422.8947万元', 23, '2023-11-10');
INSERT INTO `cmc_brand_project` VALUES ('1648881535982325359', '2023G12', '南部县农村土地承包经营权等确权颁证建库第三方质检服务项目', '0115', '宋兴贵', '13880530027', '0026', '黄振戈', '18981963993', '本项目通过检查验收之日结束。', 0.00, '2016年品牌项目，补登记。', '本合同签入合同编码CMC2A16025，签入金额为115万元。', 23, '2023-11-28');
INSERT INTO `cmc_brand_project` VALUES ('1648881536316069847', '2023G15', '成都市国土资源局高新分局空港新城全域范围集体土地所有权、集体建设用地使用权和集体农用地使用权确权登记', '0015', '杨恒', '18981779144', '0034', '杨恒', '18981779144', '', 0.00, '2017年的合同', '主合同CMC2H17026，金额85.2万元；分包合同CMC3A18002，金额76.68万元', 23, '2023-12-21');
INSERT INTO `cmc_brand_project` VALUES ('1648881537182580267', '2023G16', '成都高新区统筹城乡工作局空港新城全域范围农村房屋所有权、林权、土地承包经营权、小型水利工程所有权确权', '0016', '杨恒', '18981779144', '0034', '杨恒', '18981779144', '', 0.00, '2017年的合同', '主合同CMC2A17034，金额95万元；分包合同CMC3A18003，金额85.5万元。', 23, '2023-12-21');
INSERT INTO `cmc_brand_project` VALUES ('1648881538195705882', '2021G25', '喜德县自然资源局存量林权登记数据整合项目 合作协议', '0198', '', '', '0058', '何建', '', '', 2467359.00, '', 'CMC3：G-21025', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881539467997449', '2022G10', '佛山市季华路西延线工程（南海丹灶段）项目测量工程地籍及房产测绘工程', '0054', '刘浩正', '13928623777', '0040', '杨智慧', '13728536744', '自协议签订之日起，至项目成果通过甲方及业主方的评审合格。', 0.00, '佛山市季华路西延线工程（南海丹灶段）项目测量工程劳务合作协议为单价合同', '2022.9.20登记', 23, '2022-09-20');
INSERT INTO `cmc_brand_project` VALUES ('1648881540367251542', '2023G05', '乳源县天然气管道及配套设施建设项目管网路由地形测绘、规划定桩测量、地下管线普查测绘项目', '0139', '张冰', '13927857477', '0070', '谭振晖', '18128913000', '90个日历天（合同签订之日起）', 220000.00, '1.项目名称：乳源县天然气管道及配套设施建设项目地下管线普查项目\r\n2.项目地点：韶关市乳源瑶族自治县境内\r\n3.合同期限：90个日历天（合同签订之日起）\r\n1.工作内容\r\n乳源县天然气管道及配套设施建设项目地下管线普查项目。乙方应依据测绘技术规范及甲方指定范围及要求，对甲方指定区域进行天然气管道及配套设施普查，普查成果应提交甲方检查验收。\r\n2.成果验收\r\n乙方根据甲方或相关业务部门提出意见进行调整，直至成果满足使用要求。\r\n3.工程质量标准\r\n合格。\r\n4.资料提交\r\n提交但不限于成果包含内容：\r\n（1）数据成果\r\n地下管线普查更新数据库（MDB），包括：管线点属性库、管线线属性库、管线面属性库、管线辅助点属性库、管线辅助线属性库、管线注记属性库；\r\n综合地下管线成果图（DWG格式）；\r\n管线点成果表（电子记录）；\r\n（2）地下管线普查成果技术总结报告。\r\n（3）其他成果\r\n甲方规定的其他成果。\r\n\r\n1.项目名称：乳源县天然气管道及配套设施建设项目管网路由地形测绘及规划定桩测量项目\r\n2.项目地点：韶关市乳源瑶族自治县境内\r\n3.合同期限：90个日历天（合同签订之日起）\r\n\r\n1.工作内容\r\n天然气管道及配套设施、地形测绘及规划定桩测量。乙方应依据测绘技术规范', '乙方应依据测绘技术规范及甲方指定范围及要求，对甲方指定区域进行天然气管道及配套设施普查，普查成果应提', 23, '2023-08-16');
INSERT INTO `cmc_brand_project` VALUES ('1648881541383269015', '2023G13', '峨眉山市农村土地承包经营权确权登记第三方质检项目', '0047', '黄振戈', '18981963993', '0026', '黄振戈', '18981963993', '', 246500.00, '工作已完成，补登记', '合同签入CMC2A15021，金额为29万元。', 23, '2023-12-05');
INSERT INTO `cmc_brand_project` VALUES ('1648881542445001228', '2022G25', '祥云财富工业园区有色金属循环产业园（一期）工程规划一路、规划二路勘察设计施工总承包（EPC)地形图测量劳', '0215', '刘泽农', '18687127690', '0175', '黄子荣', '13669714290', '自协议签订之日起，至项目成果通过甲方及业主方的评审合格。', 63670.00, '1、根据甲方提供的资料，完成祥云财富工业园区有色金属循环产业园（一期）工程规划一路、规划二路、规划三路路线总长约2378.62米的基础控制测量及1:500地形图测绘工作；\r\n2、本项目总占地面积约24000平方米，建设内容为3条道路，总长2378.62米，其中：规划一路长1356.319米，宽10米；规划二路长1022.305米，宽10米，中桩中平及横断面测量3.0km.1:500数字化地形图测绘预计0.45km²(控制由业主提供)。', '', 23, '2022-08-01');
INSERT INTO `cmc_brand_project` VALUES ('1648881543281433717', '2022G30', '国家地震烈度速报与预警工程四川子项目-1:500地形和用地红线图测绘项目', '0169', '颜老师', '18180676900', '0118', '蒋青锋', '18180676900', '', 80.08, '原合同约定153个新建基准站和207个新建基本站（总计360个点位）进行1:500用地红线图和1:500地形图测绘工作，因四川省地震局项目建设点位调整和土地权属等原因，改建基准站28个、新建基本站62个，共计90个台站无需进行1:500用地红线图和1:500地形图的测绘工作；核减后按270个点位完成1:500用地红线图和1:500地形图的测绘工作。', '2022.9.30补登记。', 23, '2022-09-30');
INSERT INTO `cmc_brand_project` VALUES ('1648881544106735148', '2023G02', '宁南县测量标志普查维护项目', '0122', '兰局', '13795619729', '0105', '邹勇', '13458493330', '合同签订后至2023年9月底前完成全面重建或迁建的水准点高程联测、大地点坐标测量工作，获得重建或迁建的测', 618062.00, '（一）测量标志普查\r\n宁南县现有测量标志44座，城市基础控制网测量标志9座，本次需普查各类测量标志总计53座，其中卫星导航定位基准点5座，一等水准点9座、二等水准点30座、三等水准点0座，重力点0座；依法建立的与2000国家大地坐标系相联系的地方独立坐标系的测量标志9座；具体情况见附件1。根据普查实际情况对本行政区域内测量标志进行实地逐点核查登记，规范填写《测量标志普查（巡查）登记表》（见附件2），清晰拍摄测量标志、周边环境照片。测量标志点位信息或周边环境发生变化的，应重新填写测量标志点之记，形成完善的测量标志普查维护台账及资料档案。\r\n（二）测量标志维护\r\n参照国家级测量标志保护方案和凉山州规自局测量标志保护的工作方案，对53座控制点进行分级分类。其中重点保护类主要包括：卫星导航定位基准站，D级及以上卫星大地控制点，一、二、三等水准点，重力点，仪器检定场专用测量标志，依法建立的与2000 国家大地坐标系相联系的地方独立坐标系的测量标志，以及其他有重要使用价值或者纪念、科普等文化价值的测量标志。一般保护类是指其他未纳入重点保护类的测量标志。宁南县重点保护类测量标志共有53座，一般保护类测量标志共有0座。\r\n普查中发现测量', '本项目签入总额人民币大写：陆拾玖万伍仟元整，小写：695000.00元。', 23, '2023-04-27');
INSERT INTO `cmc_brand_project` VALUES ('1648881545498678846', '2020G32', '2020佛山项目技术服务合同（10个合同一起）', '0257,0060,0049,0061,0196,0051,0058,0063', '', '', '0040', '刘浩正', '13928623777', '', 1210659.70, '结束', 'CMC3:G-20031', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881546471696110', '2021G23', '万达地理信息系统 V5.0软件销售合同书(横五支路北段及配套工程排水管网内窥试验检测)', '0269', '', '', '0191', '王羽、魏学渊', '', '', 38376.00, '', 'CMC3：G-21023', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881547205382345', '2021G30', '通江县自然资源和规划局农村“房地一体”确权登记发证采购项目（第四包）合同书', '0189', '', '', '0013', '吕静', '', '', 6934265.00, '', 'CMC3：G-21030', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881548680667650', '2022-008', '龙泉驿区1:500系列数字测绘产品生产与更新项目（第二包）监理服务技术服务协议', '0028', '高铭鸿', '13880438870', '0149', '曲仁明', '18604592666', '', 814206.00, '', '', 23, '2022-04-12');
INSERT INTO `cmc_brand_project` VALUES ('1648881549719778294', '2023G03', 'G7611线西昌至香格里拉段高速公路特长隧道二等控制网建立项目', '0170', '达乾龙副院长', '17311589370', '0184', '宁瑶', '13980583883', '协议书签订后30天完成全部工作内容。', 1778632.00, '3.1测量范围\r\n1、盐源隧道(里程范围: K52+255~K66+405)， 14.2公里特长隧道;\r\n2、长柏隧道(里程范围: K136+217~K147+730)，11.5 公里特长隧道;\r\n3、木里隧道(里程范围: MK8+542~ MK20+370)， 11.8公里特长隧道;\r\n4、草籽坪隧道(里程范围: MK20+765~MK26+790)， 6.0 公里特长隧道;\r\n5、新山隧道(里程范围: K23+500~K30+400)，6.9 公里特长隧道。\r\n3.2工作内容内容\r\n1)选点埋桩;\r\n2)二等平面控制测量;\r\n3)二等水准控制测量;', '', 23, '2023-07-20');
INSERT INTO `cmc_brand_project` VALUES ('1648881550655736204', '2022G16', '南岭国家公园南水片区生态环境系统保护修复工程-南水水库环境保护工程三期（生态边坡治理）竣工图编制及工', '0142', '', '', NULL, '周全', '13688460154', '', 0.00, '', '2022.5.25登记项目，暂无委外合同', 23, '2022-05-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881551717164366', '2022G19', '乳源高新区绿之源西侧地块标准厂房建设项目沉降监测技术服务合同', '0138', '', '', NULL, '周全', '13688460154', '', 0.00, '', '2022.5.25登记项目，暂无委外合同', 23, '2022-05-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881552608723789', '2022G21', '石棉县孟获城景区规划用地202226号、202227号宗地1:500地形图测绘技术服务项目技术服务合同', '0157', '', '', NULL, '黎超', '', '', 0.00, '', '2022.5.25登记项目，暂无委外合同', 23, '2022-05-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881553105436619', '2022G22', '中国国土勘测规划院外协项目合同书-2021年度全国国土变更调查成果国家级核查及监理包10', '0244', '辛丽璇', '010-63889348', '0179', '王鑫蕊', '15546163921', '合同签订之日起，2022年12月31日止。', 1093019.00, '使用甲方提供的遥感影像、遥感监测成果、2020年度基础库、举证照片等数据资料，对任务区域内所有县级调查区域的2021年度国土变更调查成果开展全面国家级内业核查和互联网+在线核查。', '2022.5.25登记项目，正在办理委外合同', 23, '2022-05-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881554117708433', '2022G23', '乳源瑶族自治县新农村示范性综合楼建设项目沉降观测项目技术服务合同', '0140', '李鑫龙', '18218521161', NULL, '周全', '13688460154', '', 0.00, '', '2022.5.25登记项目，暂无委外合同', 23, '2022-05-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881555334848024', '2019G09', '2019年航空摄影与数据处理之彩色数字正射影像制作（A区）北京市信息化工程项目合同', '0006', '', '', '179', '韩志华', '18610313710', '', 1062080.00, '已经验收，全部结束。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881556213977277', '2019G18', '甘孜州九龙县水利局三岩龙河河道管理范围划定工作', '0098', '', '', '0079', '邹勇', '13458493330', '', 357880.00, '已经完成，等待验收，3月15日。等待验收11月15日。', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881557218260415', '2020G12', '广元市利州区河湖岸线划定服务单位（南河、清江河、白龙江）河道管理范围划定服务', '0072', '', '', '0193', '涪圣公司蒲春国', '15808168138', '', 15000.00, '黄梅琳已处理完毕', 'CMC3:G-20012', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881558891458467', '2020G19', '青川县重点区域自然资源权属调查（大熊猫公园）', '0182', '', '', '0034', '鲁', '', '', 240000.00, '', 'CMC3:G-20019', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881559502201292', '2021G08', '赣深GSSG-1标CPIII建网及复测劳务合同', '0265', '', '', '0132', '王鑫', '15828642450', '', 440060.00, '结算办理了一半，预计21年6月30日前完成，合同规定是20年12月5日完成，全部结束。', 'CMC3：G-21008', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881560984759879', '2021G12', '甘孜州2020年河长制水生态保护河湖（19条州级河流及125个常年湖面面积1km²以下湖泊）管理范围划定项目技术', '0068', '', '', '0129', '邹媛媛', '', '', 658.69, '', 'CMC3：G-21012', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881561406805815', '2021G19', '成都市高新技术产业开发区西区地下管线普查成果更新服务项目劳务协议', '0014', '', '', '0050', '刘晨熙', '', '', 3292676.00, '', 'CMC3：G-21019', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881562606887093', '2021G20', '重筠高速公路项目测绘技术服务劳务协议', '0258', '', '', '0063', '游杨声', '13996329278', '', 46808.00, '', 'CMC3：G-21020', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881563908026071', '2023G07', '天津华电宝坻大白庄15万千瓦风电项目土地测绘技术服务合同', '0188', '巩太义', '18526676096', '0186', '李木', '13881741548', '合同工期自合同签订之日起90天内。', 0.00, '大白庄镇风电项目规划容量150MW，新建30台单机容量5MW风力发电机组及1座220kV升压站。乙方完成天津华电宝坻大白庄15万千瓦风电项目包括勘测定界、地籍测绘、出让测绘、实测地形图等土地出让阶段全部测绘技术服务的相关工作，取得所需要的政府主管部门批复，配合甲方完成土地征租等相关工作，确保项目顺利开工。', '甲方签入合同CMC2：G-23010，金额为640000.00元。', 23, '2023-09-25');
INSERT INTO `cmc_brand_project` VALUES ('1648881564224965303', '2024G02', '三圣街道办事处拆迁航拍、测绘服务项目', '0026', '黄菲菲', '13880441332', '0076', '黄菲菲', '13880441332', '', 0.00, '', '签入合同CMC2：G23005 ，签入金额21.958122万元', 23, '2024-03-14');
INSERT INTO `cmc_brand_project` VALUES ('1648881565129989617', '2021G36', '成都高新技术产业开发区西区地下管线普查成果更新服务探测协作委托协议', '0014', '', '', '0095', '刘辰熙', '', '', 1499879.40, '', 'CMC3：G-21036', 23, '2022-05-11');
INSERT INTO `cmc_brand_project` VALUES ('1648881566388194798', '2022G33', '乳源县天然气管道及配套设施建设项目地下管线普查项目技术服务', '0139', '全、张冰', '13927857477', '0001', '王天', '18341894357', '', 0.00, '', '', 23, '2022-12-28');
INSERT INTO `cmc_brand_project` VALUES ('1648881567226488441', '2019G22', '大庆石油管理局职工家属区分离移交物业、供热系统维修改造工程测绘现状地形图', '0037', '', '', '0053', '李云志', '15546311222', '', 242637.82, '全部结束，款项未完。3月16日', '2022.4.23补登项目信息', 23, '2022-04-23');
INSERT INTO `cmc_brand_project` VALUES ('1648881568324531139', '2020G15', '四川省李家岩水库工程永久界桩测设及埋设工程服务项目', '0027', '', '', '0118', '蒋青峰', '18180676900', '', 236600.00, '2020年已经全部结束。3月15日', 'CMC3:G-20015', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881569137499670', '2020G23', '新建重庆至黔江铁路站前工程CQQJZQ-6标段精测网复测技术劳务协议及补充协议', '0264', '', '', '0096', '张念', '17761261726', '', 1966504.00, '', 'CMC3：G-21011', 23, NULL);
INSERT INTO `cmc_brand_project` VALUES ('1648881570204409208', '2024G01', '遂宁高新区排水管网检测、清淤项目现场踏勘测绘合同', '0180', '张策', '15130380832', '0002', '张策', '15130380832', '', 91200.00, '本合同签入编码为CMC2：A21018，签入金额为96000元。工作已完成，已收到合同款。', '本项目甲方已经于2021年安排工作，目前工作已经完成。补登记项目信息。', 23, '2024-01-29');

-- ----------------------------
-- 57、cmc品牌项目进度表
-- ----------------------------
drop table if exists `cmc_brand_project_progress`;
create table `cmc_brand_project_progress`  (
  `progress_id` 	bigint not null  auto_increment comment '项目进度id',
  `project_id` 		char(19)		default null comment '项目id',
  `percentage` 		varchar(5)		default null comment '累计进度',
  `date` 			datetime		default null comment '截至日期',
  `situation` 		varchar(255)	default null comment '完成进度说明',
  primary key (`progress_id`)
) engine = innodb comment = 'cmc品牌项目进度表';

-- ----------------------------
-- 初始化-品牌项目进度表数据
-- ----------------------------
INSERT INTO `cmc_brand_project_progress` VALUES (1, '1648881569137499670', NULL, '2023-05-17 00:00:00', '按合同约定工期执行，2024年下半年合同可执行完成');
INSERT INTO `cmc_brand_project_progress` VALUES (2, '1648881568324531139', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (3, '1648881567226488441', NULL, '2023-05-17 00:00:00', '项目已完成，收款完毕，应支付款6万多未办理。');
INSERT INTO `cmc_brand_project_progress` VALUES (4, '1648881566388194798', NULL, '2023-01-11 00:00:00', '工作已完成100%。');
INSERT INTO `cmc_brand_project_progress` VALUES (5, '1648881566388194798', NULL, '2023-05-19 00:00:00', '因业主方原因，项目暂停。');
INSERT INTO `cmc_brand_project_progress` VALUES (6, '1648881565129989617', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (7, '1648881564224965303', NULL, '2024-02-29 00:00:00', '项目共分6部分，2月已完成高威、明生、万福和东篱4部分，并收齐款项。余博览兰花和拆迁2部分未结算。');
INSERT INTO `cmc_brand_project_progress` VALUES (8, '1648881563908026071', NULL, '2023-09-27 00:00:00', '10月7日完成勘测定界工作；10月20日提交地形图成果资料');
INSERT INTO `cmc_brand_project_progress` VALUES (9, '1648881562606887093', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (10, '1648881561406805815', NULL, '2022-05-18 00:00:00', '外业已完成，正在接收检查和修改。目前现场只有3人。');
INSERT INTO `cmc_brand_project_progress` VALUES (11, '1648881561406805815', NULL, '2023-05-18 00:00:00', '项目已完成，剩余部分尾款待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (12, '1648881560984759879', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (13, '1648881559502201292', NULL, '2023-05-18 00:00:00', '主合同已经全额开票，还有123190未收款。工作已结束，尾款催收中。');
INSERT INTO `cmc_brand_project_progress` VALUES (14, '1648881558891458467', NULL, '2023-05-17 00:00:00', '项目已完成，剩余款项待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (15, '1648881557218260415', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (16, '1648881556213977277', NULL, '2023-05-17 00:00:00', '项目已完成，剩余尾款待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (17, '1648881555334848024', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (18, '1648881554117708433', NULL, '2023-05-19 00:00:00', '因业主方原因，项目暂停。');
INSERT INTO `cmc_brand_project_progress` VALUES (19, '1648881553105436619', NULL, '2023-05-19 00:00:00', '主合同已经收款95%。工作已完成，尾款催收中。柯枭通知，与合作方最后一次支付时，应扣除标书打印费2000.');
INSERT INTO `cmc_brand_project_progress` VALUES (20, '1648881552608723789', NULL, '2023-05-19 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (21, '1648881551717164366', NULL, '2023-05-19 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (22, '1648881550655736204', NULL, '2023-05-19 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (23, '1648881549719778294', NULL, '2023-07-20 00:00:00', '项目已完成。收到甲方第一笔款项。');
INSERT INTO `cmc_brand_project_progress` VALUES (24, '1648881548680667650', NULL, '2022-03-30 00:00:00', '已完成140平方公里外业抽查');
INSERT INTO `cmc_brand_project_progress` VALUES (25, '1648881548680667650', NULL, '2023-05-19 00:00:00', '生产单位已经完成170平方公里的数字线划图，其对应的监理工作也完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (26, '1648881547205382345', NULL, '2023-05-18 00:00:00', '外业工作已经结束。目前正在进行权籍资料扫描工作。剩余部分款项待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (27, '1648881547205382345', NULL, '2023-07-28 00:00:00', '甲方召集会议，通报县级验收情况，反映到我标段合同预期户数33920户，实测27000左右，差额较大，乡镇也向上反映调查遗漏情况，需特别重视。另有项目负责人经验少，沟通协调能力不足，人员不足，作业流程不够规范等问题。甲方的措辞很不友善，须与合作方加强沟通，明确要求，压实责任，严防质量风险，以及扩大为法律风险。');
INSERT INTO `cmc_brand_project_progress` VALUES (28, '1648881547205382345', NULL, '2023-08-24 00:00:00', '何亚明致电：经过充分的准备，8月23日陪同甲方登记中心主任到4标随机抽查，对成果质量满意，相较2、3标段认可度更高。本次抽查扭转了甲方之前的负面认识，得到了甲方认可。由于前期甲方要求基本农田范围房屋不测量，不计户数，至4标约5000户农房现需补测，计入结算户数，目前合作方称已安排补测工作（三维模型已有，不需重新飞行建模）。');
INSERT INTO `cmc_brand_project_progress` VALUES (29, '1648881547205382345', NULL, '2024-01-02 00:00:00', '已按甲方要求完成补测等整改，待2024年上半年接受验收。合同约定支付90%之前不要求验收通过。');
INSERT INTO `cmc_brand_project_progress` VALUES (30, '1648881546471696110', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (31, '1648881545498678846', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (32, '1648881544106735148', NULL, '2023-05-19 00:00:00', '外业普查已经完成，正在进行迁建维护工作。');
INSERT INTO `cmc_brand_project_progress` VALUES (33, '1648881544106735148', NULL, '2023-06-25 00:00:00', '因过河大桥施工停滞，原计划路线有较大调整，应规自局要求，项目暂停，等待下一步工作安排通知。');
INSERT INTO `cmc_brand_project_progress` VALUES (34, '1648881544106735148', NULL, '2023-09-04 00:00:00', '部分测量标志不合格进行整改中；由于大桥施工仍未合拢及雨季等客观原因，造成水准测量工作仍未实施，待甲方确定方案后再处理。');
INSERT INTO `cmc_brand_project_progress` VALUES (35, '1648881543281433717', NULL, '2022-10-12 00:00:00', '已完成100%');
INSERT INTO `cmc_brand_project_progress` VALUES (36, '1648881543281433717', NULL, '2023-05-19 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (37, '1648881542445001228', NULL, '2022-08-15 00:00:00', '目前已完成100%。');
INSERT INTO `cmc_brand_project_progress` VALUES (38, '1648881542445001228', NULL, '2023-05-19 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (39, '1648881539467997449', NULL, '2023-05-19 00:00:00', '项目已完成，有部分尾款待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (40, '1648881538195705882', NULL, '2022-09-02 00:00:00', '朱静电话联系何进：州组织检查通过，准备提交汇交资料。');
INSERT INTO `cmc_brand_project_progress` VALUES (41, '1648881538195705882', NULL, '2023-05-18 00:00:00', '项目已完成，甲方的原因无资金支付进度款，剩余款项100%未支付。');
INSERT INTO `cmc_brand_project_progress` VALUES (42, '1648881531813003546', NULL, '2023-09-04 00:00:00', '8月20日已完成外调工作，调查成果矢量化及成果公示已基本完成，待四川省煤田测绘工程院确定验收模版。能按既定工期完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (43, '1648881530784030826', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (44, '1648881529132609043', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (45, '1648881528994118884', NULL, '2023-05-18 00:00:00', '初次验收完毕，需要整改。');
INSERT INTO `cmc_brand_project_progress` VALUES (46, '1648881527138532207', NULL, '2023-05-17 00:00:00', '项目已完成，收款完毕，付款6万多未办理。项目重复登记（2019、2020）。');
INSERT INTO `cmc_brand_project_progress` VALUES (47, '1648881526426133551', NULL, '2023-02-16 00:00:00', '已完成20%');
INSERT INTO `cmc_brand_project_progress` VALUES (48, '1648881526426133551', NULL, '2023-05-10 00:00:00', '项目完成80%，补测部分地形图,项目已完成80%，剩余施工阶段技术服务。');
INSERT INTO `cmc_brand_project_progress` VALUES (49, '1648881526426133551', NULL, '2023-09-13 00:00:00', '后续施工阶段提供技术服务，服务周期2年。');
INSERT INTO `cmc_brand_project_progress` VALUES (50, '1648881523302668523', NULL, '2023-09-27 00:00:00', '10月7日完成勘测定界工作；10月20日提交地形图成果资料');
INSERT INTO `cmc_brand_project_progress` VALUES (51, '1648881522394977276', NULL, '2023-05-19 00:00:00', '主合同收款30%。已完成勘测定界工作并出具报告。包含在2022G26的6个项目中。');
INSERT INTO `cmc_brand_project_progress` VALUES (52, '1648881521618815296', NULL, '2023-05-19 00:00:00', '公司的委外项目，不是品牌项目。');
INSERT INTO `cmc_brand_project_progress` VALUES (53, '1648881520372638126', NULL, '2023-05-19 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (54, '1648881519445697524', NULL, '2023-05-19 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (55, '1648881518705623000', NULL, '2023-05-19 00:00:00', '项目已完成，款项催收中。包含在2022G26的6个项目中。');
INSERT INTO `cmc_brand_project_progress` VALUES (56, '1648881517792621377', NULL, '2023-05-19 00:00:00', '项目已完成，款项催收中。包含在2022G26的6个项目中。');
INSERT INTO `cmc_brand_project_progress` VALUES (57, '1648881516151982973', NULL, '2023-05-19 00:00:00', '项目已完成，款项催收中。包含在2022G26的6个项目中。');
INSERT INTO `cmc_brand_project_progress` VALUES (58, '1648881515168400923', NULL, '2023-05-19 00:00:00', '项目已完成，剩余尾款待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (59, '1648881514827536484', NULL, '2023-05-18 00:00:00', '200多户资料签字未完成，剩余工作量7月底基本能结束。');
INSERT INTO `cmc_brand_project_progress` VALUES (60, '1648881514827536484', NULL, '2023-10-12 00:00:00', '项目正在组织县相关主管部门进行验收，验收通过后，本月能收剩余款项。');
INSERT INTO `cmc_brand_project_progress` VALUES (61, '1648881513154226108', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (62, '1648881512995948224', NULL, '2023-05-18 00:00:00', '项目已完成，剩余款项待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (63, '1648881511419224144', NULL, '2023-06-01 00:00:00', '项目已完成，尾款申请支付手续已办妥，待甲方付款。');
INSERT INTO `cmc_brand_project_progress` VALUES (64, '1648881510276093538', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (65, '1648881509916967985', NULL, '2023-05-17 00:00:00', '项目已基本完成，因政策调整，未验收，剩余30%款项待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (66, '1648881508884235744', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (67, '1648881507341216505', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (68, '1648881506262384877', NULL, '2023-05-17 00:00:00', '项目已完成，剩余尾款待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (69, '1648881505508258294', NULL, '2023-05-17 00:00:00', '项目已完成，剩余尾款70多万待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (70, '1648881504538918971', NULL, '2022-12-26 00:00:00', '工作已完成100%');
INSERT INTO `cmc_brand_project_progress` VALUES (71, '1648881504538918971', NULL, '2023-05-19 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (72, '1648881503914685758', NULL, '2022-11-09 00:00:00', '截止11月9日，该项目已完成40%');
INSERT INTO `cmc_brand_project_progress` VALUES (73, '1648881503914685758', NULL, '2023-05-19 00:00:00', '主合同已经收款40%。项目已经通过验收。正在催收余款。');
INSERT INTO `cmc_brand_project_progress` VALUES (74, '1648881502344420872', NULL, '2023-05-19 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (75, '1648881501999970158', NULL, '2023-05-19 00:00:00', '主合同已经收款20%。完成图件资料分析，已确定10个立标点。');
INSERT INTO `cmc_brand_project_progress` VALUES (76, '1648881500805652766', NULL, '2023-05-19 00:00:00', '项目已完成，中途有反馈进行了调整。现数据已入库。计划6月底开票收款。');
INSERT INTO `cmc_brand_project_progress` VALUES (77, '1648881499670246412', NULL, '2023-05-19 00:00:00', '项目已经结束。阿坝小金项目收款60%。阿坝金川项目收款30%。JX三个项目的工作已经完成，款项催收中。');
INSERT INTO `cmc_brand_project_progress` VALUES (78, '1648881498492942157', NULL, '2022-06-27 00:00:00', '项目经理佟江17642066851，目前项目还未开始，等待水库蓄水后安排。修改校核后技术方案发对方。');
INSERT INTO `cmc_brand_project_progress` VALUES (79, '1648881498492942157', NULL, '2023-05-19 00:00:00', '完成方案评审及标段范围内监测点的埋设（隧道监测点52个、沉降监测点10个、桥墩监测点8个、岩堆监测点25个、基准点4个、30m深层测斜孔3个）');
INSERT INTO `cmc_brand_project_progress` VALUES (80, '1648881497897742576', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (81, '1648881496732458224', NULL, '2023-05-18 00:00:00', '项目已完成，剩余20万尾款待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (82, '1648881495341470081', NULL, '2022-06-22 00:00:00', '完成80%质检工作，余下的正在开展，质检反馈问题正在整改。目前和甲方正在协调质检工作，项目基本按照合同工期执行。项目联系人李维涛18628360777');
INSERT INTO `cmc_brand_project_progress` VALUES (83, '1648881495341470081', NULL, '2022-08-05 00:00:00', '因农民工讨薪收到甲方发函，上午朱静去甲方说明情况（李维涛提供，其称不便出面）并承诺妥善处理。下午朱静到泰恒中监督解决，形成书面并在次日回复甲方，处理完毕。项目进度正常，数据已按时提交。');
INSERT INTO `cmc_brand_project_progress` VALUES (84, '1648881495341470081', NULL, '2023-05-18 00:00:00', '工作已经结束，资料归档整理待入档案馆。剩余部分尾款待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (85, '1648881494246157118', NULL, '2023-05-18 00:00:00', '项目基本完成，有部分尾款待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (86, '1648881493800980185', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (87, '1648881492697082664', NULL, '2023-05-18 00:00:00', '按合同约定工期执行，2024年下半年合同可执行完成。项目重复登记');
INSERT INTO `cmc_brand_project_progress` VALUES (88, '1648881491149208612', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (89, '1648881490772160831', NULL, '2023-05-18 00:00:00', '项目已完成，剩余部分款项待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (90, '1648881489704367906', NULL, '2023-05-18 00:00:00', '主合同已经全额开票，还有698740未收款。工作已结束，款项催收中。');
INSERT INTO `cmc_brand_project_progress` VALUES (91, '1648881488468441673', NULL, '2023-05-18 00:00:00', '主合同已经全额收款。');
INSERT INTO `cmc_brand_project_progress` VALUES (92, '1648881487602914039', NULL, '2023-05-18 00:00:00', '现场界桩和告示牌已经埋设完毕，入库预检。');
INSERT INTO `cmc_brand_project_progress` VALUES (93, '1648881486613536461', NULL, '2023-05-18 00:00:00', '现场界桩和告示牌已经埋设完毕，入库预检。');
INSERT INTO `cmc_brand_project_progress` VALUES (94, '1648881484580441746', NULL, '2023-05-19 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (95, '1648881483749455008', NULL, '2023-05-19 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (96, '1648881482178338530', NULL, '2023-05-19 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (97, '1648881481416233390', NULL, '2023-05-19 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (98, '1648881480428200362', NULL, '2023-05-19 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (99, '1648881478117688193', NULL, '2023-05-19 00:00:00', '由于疫情原因，期间未进行监测服务，合同顺延。');
INSERT INTO `cmc_brand_project_progress` VALUES (100, '1648881477873513559', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (101, '1648881476725078246', NULL, '2023-05-18 00:00:00', '项目已完成，剩余50%款项待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (102, '1648881475627496812', NULL, '2022-07-28 00:00:00', '经朱静电话联系蒲，埋桩已完成，资料未更新无需再次提交，待验收。');
INSERT INTO `cmc_brand_project_progress` VALUES (103, '1648881475627496812', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (104, '1648881474787587726', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (105, '1648881473403943359', NULL, '2023-05-17 00:00:00', '项目基本已完成，入库已完成，等待省质检。甲方没钱支付，剩余70%工程款未收。');
INSERT INTO `cmc_brand_project_progress` VALUES (106, '1648881472652531082', NULL, '2023-05-17 00:00:00', '项目已完成，甲方的原因没钱支付，剩余40%款项待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (107, '1648881471818055704', NULL, '2023-05-17 00:00:00', '项目已完成，等待最终验收，部分款项待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (108, '1648881470559297696', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (109, '1648881469719926037', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (110, '1648881468566500535', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (111, '1648881467963930212', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (112, '1648881466438427009', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (113, '1648881465361472653', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (114, '1648881464212970625', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (115, '1648881463396836849', NULL, '2023-05-17 00:00:00', '项目已完成，甲方的原因没钱支付，剩余40%款项待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (116, '1648881462113575151', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (117, '1648881461569098768', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (118, '1648881460870968039', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (119, '1648881459868646458', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (120, '1648881458196695104', NULL, '2023-05-17 00:00:00', '甲方原因，项目乡镇发证等工作未完成，剩余30多万未收款。');
INSERT INTO `cmc_brand_project_progress` VALUES (121, '1648881457583018339', NULL, '2023-05-17 00:00:00', '项目已完成，部分款项未收，已发律师函给甲方。');
INSERT INTO `cmc_brand_project_progress` VALUES (122, '1648881456419258795', NULL, '2023-05-17 00:00:00', '项目有变更，合同金额增加到65万，部分款项未收。');
INSERT INTO `cmc_brand_project_progress` VALUES (123, '1648881455580228892', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (124, '1648881454447058527', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (125, '1648881453897870260', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (126, '1648881452460389261', NULL, '2023-05-17 00:00:00', '项目已完成，已通过市级验收，剩余20多万尾款未收。');
INSERT INTO `cmc_brand_project_progress` VALUES (127, '1648881451979583478', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (128, '1648881450264298208', NULL, '2023-05-17 00:00:00', '项目已完成，剩余尾款待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (129, '1648881449965355429', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (130, '1648881448397275969', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (131, '1648881447286760361', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (132, '1648881446228613176', NULL, '2023-05-17 00:00:00', '项目已完成，剩余尾款4万多待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (133, '1648881445489756105', NULL, '2023-05-19 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (134, '1648881444781630921', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (135, '1648881443401062469', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (136, '1648881442940451734', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (137, '1648881441941104886', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (138, '1648881440824314687', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (139, '1648881439888862850', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (140, '1648881438491896336', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (141, '1648881437968038882', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (142, '1648881436608982252', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (143, '1648881435524619393', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (144, '1648881434416421278', NULL, '2023-05-17 00:00:00', '按合同约定工期执行，2024年下半年合同可执行完成');
INSERT INTO `cmc_brand_project_progress` VALUES (145, '1648881433474717767', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (146, '1648881432128795856', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (147, '1648881431775772126', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (148, '1648881430481233607', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (149, '1648881429231667186', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (150, '1648881428994221762', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (151, '1648881427604905372', NULL, '2023-05-17 00:00:00', '项目已完成，剩余283.3789万尾款待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (152, '1648881426709662854', NULL, '2023-05-17 00:00:00', '项目已完成，剩60%款项待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (153, '1648881425971828487', NULL, '2022-06-22 00:00:00', '完成全部1440km全野外管线探测，其中1100公里完成质检，根据质检反馈整改，整改工作量不大，余下340km正安排质检。目前能够按照合同要求6月30日完成管线普查工作，下一步工作成果整合，数据入库。目前乙方项目负责人：王增录17793155593，甲方委托的质检单位：伟志股份公司。');
INSERT INTO `cmc_brand_project_progress` VALUES (154, '1648881425971828487', NULL, '2022-08-08 00:00:00', '甲方发来进度滞后的告知函，杨卫和朱静已约谈智绘地信王增录了解情况，并提出相应措施。约定8月10日到成华区规自局当面复函。');
INSERT INTO `cmc_brand_project_progress` VALUES (155, '1648881425971828487', NULL, '2022-08-10 00:00:00', '朱静与王增录下午已到成华区规自局复函，与分管领导黄局和经办人姜科长面谈，承诺了工作进度，对方表示须务实推进项目。目前还缺少阶段性测绘成果质量检验报告；成果核验，还差自来水；正在进行外部接边（龙泉）、数据库改错，8月16日前须完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (156, '1648881425971828487', NULL, '2023-05-18 00:00:00', '工作已经结束，资料归档整理待入档案馆。');
INSERT INTO `cmc_brand_project_progress` VALUES (157, '1648881424471957124', NULL, '2023-05-18 00:00:00', '工作已经结束，报告待业主审核。剩余部分款项待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (158, '1648881423612865231', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (159, '1648881422695473154', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (160, '1648881421117518308', NULL, '2023-05-18 00:00:00', '项目已完成，剩余20万尾款待收。与2021G17为同一个合同。');
INSERT INTO `cmc_brand_project_progress` VALUES (161, '1648881420360647692', NULL, '2023-05-18 00:00:00', '项目已完成，剩余款项10%待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (162, '1648881419943175231', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (163, '1648881418264249117', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (164, '1648881417922557636', NULL, '2023-05-18 00:00:00', '项目已结束，收付款完成');
INSERT INTO `cmc_brand_project_progress` VALUES (165, '1648881416350756785', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (166, '1648881415864742225', NULL, '2023-05-17 00:00:00', '项目已完成，剩余部分尾款待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (167, '1648881414508823154', NULL, '2023-05-17 00:00:00', '项目已完成，剩余尾款400多万待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (168, '1648881413415678164', NULL, '2023-05-17 00:00:00', '项目已完成，剩余尾款1万多待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (169, '1648881412494064316', NULL, '2023-05-17 00:00:00', '项目基本完成，待（下周）最终验收，剩余尾款25%待收。');
INSERT INTO `cmc_brand_project_progress` VALUES (170, '1648881411678658679', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');
INSERT INTO `cmc_brand_project_progress` VALUES (171, '1648881410240180078', NULL, '2023-05-17 00:00:00', '项目已结束，收付款完成。');

-- ----------------------------
-- 58、cmc品牌项目支付审批表
-- ----------------------------
drop table if exists `cmc_brand`;
create table `cmc_brand`  (
  `brand_id` 			char(19)  		not null 	 comment '品牌项目支付审批id',
  `project_id` 			char(19)  		default null comment '品牌项目id',
  `apply_reason` 		varchar(255)  	default null comment '申请支付说明',
  `approval_document` 	varchar(255)  	default null comment '审核文件',
  `applier` 			bigint  		default null comment '申请人',
  `apply_time` 			date  			default null comment '申请时间',
  `cw_user_id` 			bigint  		default null comment '财务部经办人',
  `cw_time` 			date  			default null comment '财务部反馈时间',
  primary key (`brand_id`)
) engine = innodb comment = 'cmc品牌项目支付审批表';

-- ----------------------------
-- 初始化-品牌项目支付审批表数据
-- ----------------------------
INSERT INTO `cmc_brand` VALUES ('1648881553105430001', '1648881553105436619', '已经收到业主款59850.00，申请向中城航遥支付52650.88。本次支付为尾款，支付金额中已经扣除标书打印费用2000。', NULL, 148, '2023-07-21', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430002', '1648881561406805815', '申请结算尾款266676.11元。', NULL, 148, '2023-06-30', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430003', '1648881499670246412', 'JX土地审核审批项目收到业主款39.5万元，JX草地审核审批项目收到业主款36.6万元，以上两个项目已完工且全额收款。申请向华兴拓图公司支付35.55+32.94=68.49万元。', NULL, 148, '2023-08-03', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430004', '1648881411678658679', '收到依安项目尾款1948735.20元。申请向松辽众鼎公司支付66万元，向黑龙江弘跃公司支付909121.68元。', NULL, 148, '2023-10-31', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430005', '1648881533668195897', '已经给业主方开票26.9万元，乙方（众茂公司）提交发票246188.80元。现申请给乙方办理结算手续。先办理结算，收到业主款后，才向乙方支付。', NULL, 148, '2023-11-14', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430006', '1648881503914685758', '已经给业主方开票841400元，乙方（自然资源部三院）提交发票543348元。现申请给乙方办理结算手续。先办理结算，收到业主款后，才向乙方支付。', NULL, 148, '2023-11-22', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430007', '1648881541383269015', '已经给业主方开票78000元，乙方（时代加华）提交发票66300元。现申请给乙方办理结算手续。先办理结算，收到业主款后，才向乙方支付。', NULL, 148, '2023-12-05', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430008', '1648881536316069847', '2019年2月收到业主款10万，2023年11月收到业主款10.2万。现申请向永鑫公司支付18.18万元。本次支付为分包合同的尾款。（主合同CMC2H17026；分包合同CMC3A18002）', NULL, 148, '2023-12-21', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430009', '1648881570204409208', '2023年12月收到业主款96000元，现申请向陆驰公司支付91200元。', NULL, 148, '2024-01-29', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430010', '1648881501999970158', '收到业主拨款339200，申请向四川辰吉公司支付301650。本次为第二次支付，分包合同支付进度到60%。', NULL, 148, '2023-09-25', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430011', '1648881515168400923', '6.25收到业主款项179000元，申请向浙江华东测绘与工程安全技术公司支付158818元。本次为该合同的一次性支付，支付后，合同款结算完毕。', NULL, 148, '2023-07-18', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430012', '1648881538195705882', '收到业主首付款100万，申请向凉山州恒信公司支付分包合同款，支付金额865601.80元。', NULL, 148, '2023-11-13', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430013', '1648881534504873335', '已经给业主方开票20万元，乙方（田册公司）提交发票176000元。现申请给乙方办理结算手续。先办理结算，收到业主款后，才向乙方支付。', NULL, 148, '2023-11-14', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430014', '1648881475627496812', '已经给业主方开票40万元，乙方（涪圣公司）提交发票357600元。现申请给乙方办理结算手续。先办理结算，收到业主款后，才向乙方支付。', NULL, 148, '2023-11-14', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430015', '1648881525998900827', '已收到业主款30万。申请向韶关荣兴公司支付23万。本次为首次付款。', NULL, 148, '2023-12-14', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430016', '1648881499670246412', '本合同中的阿坝小金输变电项目收到59360元，申请向华兴拓图公司支付53424元。本次支付为阿坝小金输变电项目的尾款。', NULL, 148, '2024-01-25', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430017', '1648881506262384877', '2024年2月2日收到业主款20万，申请向皓土公司支付16.6万元。', NULL, 148, '2024-02-02', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430018', '1648881498492942157', '4月28日收到业主拨款405300元，申请向乙方支付324779.13元。', NULL, 148, '2023-05-15', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430019', '1648881540367251542', '已经收到业主拨款。申请向韶关荣兴公司支付22万元。', NULL, 148, '2023-08-21', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430020', '1648881499670246412', '阿坝金川220kv输变电项目在6月收到业主拨款71000元，申请向华兴拓图公司支付63900。本次支付后，该项目结算到合同价款的70%。', NULL, 148, '2023-07-05', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430021', '1648881531813003546', '收到业主拨款50万元。申请向恒信公司支付410300.90元。本次为首次付款，付款金额中已经扣除招标服务费22500.00元。', NULL, 148, '2023-08-14', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430022', '1648881535982325359', '已经给业主方开票10万元，乙方（时代加华）提交发票85000元。现申请给乙方办理结算手续。先办理结算，收到业主款后，才向乙方支付。', NULL, 148, '2023-11-28', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430023', '1648881511419224144', '已经给业主方开票674476.20元，乙方（恒鑫源）提交发票607028.58元。现申请给乙方办理结算手续。先办理结算，收到业主款后，才向乙方支付。', NULL, 148, '2023-11-29', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430024', '1648881496732458224', '收到业主款266108元，现申请向乙方（中科晟图）支付231167.51元。', NULL, 148, '2023-11-29', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430025', '1648881537182580267', '已经给业主方开票12万元，乙方（永鑫公司）提交发票10.8万元。现申请给乙方办理结算手续。先办理结算，收到业主款后，才向乙方支付。（主合同CMC2A17034；分包合同CMC3A18003）', NULL, 148, '2023-12-21', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430026', '1648881503914685758', '已收到业主款，申请向蜀江南公司支付33.8万元。', NULL, 148, '2023-12-29', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430027', '1648881549719778294', '汇票已经到期，收到1303478.10元。申请向云南建设发展有限公司支付1241193.28元。', NULL, 148, '2024-03-04', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430028', '1648881425971828487', '申请结算846223.37', NULL, 148, '2023-06-27', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430029', '1648881495341470081', '申请结算1035081.76元。本次结算费用中已扣除我公司垫付的5250元。（垫付事由---武侯区地下管线文件材料入库整理费用，支付日期2023.4.13）', NULL, 148, '2023-06-30', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430030', '1648881490772160831', '6月收到业主拨款378828.95。现在申请向永鸿公司支付348522.63。项目已结束，本次支付为尾款。', NULL, 148, '2023-07-06', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430031', '1648881514827536484', '本项目收到业主款92.4万，申请向贵州初子午线公司支付534261.60元。', NULL, 148, '2023-11-13', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430032', '1648881531813003546', '已经给业主方开票20万元，乙方（恒信公司）提交发票173120.36元。现申请给乙方办理结算手续。先办理结算，收到业主款后，才向乙方支付。', NULL, 148, '2023-11-14', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430033', '1648881458196695104', '已经给业主方开票10万元，乙方（时代加华）提交发票85000元。现申请给乙方办理结算手续。先办理结算，收到业主款后，才向乙方支付。', NULL, 148, '2023-11-28', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430034', '1648881412494064316', '2019年收业主款88.2万。给顺杰公司办理结算时暂扣保证金476528元。现在补结算。', NULL, 148, '2024-01-09', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430035', '1648881544106735148', '4月收到业主拨款347500元，申请向四川启盛信息科技有限公司支付305341元。', NULL, 148, '2023-05-19', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430036', '1648881549719778294', '收到业主拨款560052.90，申请向中水云南建设公司支付544202.35。本次为首次付款。', NULL, 148, '2023-07-21', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430037', '1648881410240180078', '收到依安项目尾款1948735.32元，申请向齐齐哈尔图公司支付214360.88元。', NULL, 148, '2023-11-10', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430038', '1648881548680667650', '收到业主拨款358480元，申请向智绘地理信息支付分包合同款。应付金额328132.40元，扣除资料管理费2450后，实付金额323232.40元。', NULL, 148, '2023-11-13', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430039', '1648881501999970158', '已经给业主方开票33.92万元，乙方（辰吉公司）提交发票301650元。现申请给乙方办理结算手续。先办理结算，收到业主款后，才向乙方支付。', NULL, 148, '2023-11-14', NULL, NULL);
INSERT INTO `cmc_brand` VALUES ('1648881553105430040', '1648881427604905372', '已经给业主方开票660420.73元，乙方（光大公司）提交发票597416.59元。现申请给乙方办理结算手续。先办理结算，收到业主款后，才向乙方支付。', NULL, 148, '2023-11-22', NULL, NULL);

-- ----------------------------
-- 59、cmc品牌项目支付记录表
-- ----------------------------
drop table if exists `cmc_brand_payment`;
create table `cmc_brand_payment`  (
  `brand_payment_id` 	bigint not null  auto_increment comment '品牌项目支付记录id',
  `brand_id` 			char(19)  		default null comment '品牌项目支付审批id',
  `payment_time` 		date  			default null comment '到账时间',
  `cw_comment` 			varchar(255)  	default null comment '到账情况',
  primary key (`brand_payment_id`)
) engine = innodb comment = 'cmc品牌项目支付记录表';

-- ----------------------------
-- 初始化-品牌项目支付记录表数据
-- ----------------------------

-- ----------------------------
-- 60、cmc成果归档表
-- ----------------------------
drop table if exists `cmc_archive`;
create table `cmc_archive`  (
  `archive_id` 				char(19)  		not null 	comment '成果归档id',
  `project_id` 				char(19)  		default null comment '项目id',
  `project_leader` 			bigint  		default null comment '项目负责人',
  `submit_time` 			date			default null comment '成果提交日期',
  `submit_situation` 		varchar(255)	default null comment '备注说明',
  `produce_inspector` 		bigint			default null comment '生产部门检查员',
  `quality_inspector` 		bigint			default null comment '质量检查员',
  `dept_leader` 			bigint			default null comment '技术部负责人',
  `archiver` 				bigint			default null comment '归档人',
  `receive_time` 			date			default null comment '资料接收时间',
  `quality_time` 			date			default null comment '质量检查时间',
  `produce_time` 			date			default null comment '生产部门检查时间',
  `dept_time` 				date			default null comment '技术部审核时间',
  `archive_time` 			date			default null comment '归档时间',
  `produce_comment` 		varchar(255)	default null comment '生产部门意见',
  `quality_comment` 		varchar(255)	default null comment '质量检查意见',
  `dept_comment` 			varchar(255)	default null comment '技术部审核意见',
  `archive_comment` 		varchar(255)	default null comment '归档审核意见',
  primary key (`archive_id`)
) engine = innodb comment = 'cmc成果归档表';

-- ----------------------------
-- 初始化-成果归档表数据
-- ----------------------------
INSERT INTO `cmc_archive` VALUES ('1648881566388190001', '1648881419179261954', 61, '2020-08-20', NULL, 46, NULL, 50, 52, '2020-03-02', '2020-08-25', '2020-08-23', '2021-11-29', '2021-12-03', '已查 满足要求', '符合测绘作业计划相关要求！', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190002', '1648881419221204993', 61, '2020-08-20', NULL, 46, NULL, 50, 52, '2020-08-23', '2020-08-23', '2020-08-23', '2020-09-30', '2020-10-12', '满足用户要求', '满足用户要求', '同意检查结论。', '资料已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190003', '1648881421175750658', 61, '2020-08-20', NULL, 46, 50, 50, 52, '2020-01-15', '2020-08-25', '2020-08-23', '2020-08-25', '2020-08-25', '满足用户要求', NULL, '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190004', '1648881418126491649', 143, '2020-10-14', NULL, 51, NULL, 50, 52, '2020-10-16', '2022-03-17', '2020-10-14', '2022-03-21', '2023-08-23', '已检查，满足用户要求。', '满足要求', '同意检查结论。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190005', '1648881418881466369', 21, '2020-12-05', NULL, 33, 53, 50, 52, '2020-12-07', '2020-12-07', '2020-12-05', '2020-12-07', '2022-05-12', '同意', '符合要求。', '同意检查结论。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190006', '1648881419057627138', 46, '2020-05-09', NULL, 61, NULL, 50, 52, '2020-03-03', '2020-11-03', '2020-10-15', '2020-11-04', '2020-11-04', '已完成过程检查', '符合用户要求', '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190007', '1648881420081037314', 102, '2020-08-06', NULL, 101, NULL, 50, 52, '2021-08-07', '2020-08-25', '2020-08-07', '2021-11-29', '2021-12-03', '成果质量满足项目技术设计书要求，达到归档条件。', '符合要求', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190008', '1648881419468668930', 102, '2020-08-06', NULL, 101, 50, 50, 52, '2020-02-28', '2020-08-07', '2020-08-07', '2020-08-07', '2020-08-10', '成果质量满足项目技术设计书要求，达到归档条件。', NULL, '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190009', '1648881419099570177', 61, '2020-08-20', NULL, 46, NULL, 50, 52, '2020-01-02', '2020-08-25', '2020-08-23', '2020-08-25', '2020-08-25', '满足用户要求', '批合格', '同意检查结论。', '有测绘报告，无地形图资料');
INSERT INTO `cmc_archive` VALUES ('1648881566388190010', '1648881418466230273', 39, '2020-07-20', NULL, NULL, 53, 50, 52, '2021-12-03', '2021-12-03', '2021-08-10', '2021-12-06', '2022-03-16', '检查结果良好', NULL, '同意检查结论。', '报告及三维地形面已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190011', '1648881417115664385', 101, '2020-12-30', NULL, 103, NULL, NULL, NULL, NULL, NULL, '2021-06-21', NULL, NULL, '满足合同要求。', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190012', '1648881418764025857', 83, '2021-03-23', NULL, 51, 53, 50, 52, '2021-12-03', '2021-12-03', '2021-07-29', '2021-12-06', '2021-12-06', '满足用户要求，可以提交', NULL, '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190013', '1648881417723838466', 33, '2021-03-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190014', '1648881416742371330', 33, '2021-03-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190015', '1648881416046116866', 33, '2021-04-21', NULL, 51, 53, 50, 52, '2021-09-17', '2022-03-17', '2021-07-29', '2022-03-21', '2022-03-28', '满足用户要求，可以提交', '满足要求', '同意检查结论。', '成果及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190016', '1648881416029339649', 139, '2021-05-18', NULL, 61, NULL, NULL, NULL, NULL, NULL, '2024-04-02', NULL, NULL, '已检查，满足技术设计要求', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190017', '1648881415991590913', 39, '2021-06-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190018', '1648881415513440258', 33, '2021-07-26', NULL, 51, 54, 50, 52, '2021-12-03', '2021-12-03', '2021-07-29', '2021-12-06', '2021-12-07', '满足用户要求，可以提交', NULL, '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190019', '1648881415685406721', 33, '2021-07-26', NULL, 51, 53, 50, 52, '2021-08-01', '2021-08-16', '2021-07-29', '2021-09-01', '2021-09-03', '满足用户要求，可以提交', NULL, '同意检查结论。', '资料已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190020', '1648881418994712578', 102, '2021-07-28', NULL, 101, NULL, 50, 52, '2022-03-17', '2022-03-17', '2021-08-01', '2022-03-21', '2022-05-17', '本项目完成质量满足《混凝土坝安全监测技术规范》DL/T 5178-2016和合同要求。', NULL, '同意检查结论。', '报告已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190021', '1648881419011489794', 102, '2021-07-28', NULL, 101, NULL, 50, 52, '2022-03-17', '2022-03-17', '2021-08-01', '2022-03-21', '2022-05-17', '本项目完成质量情况满足《混凝土坝安全监测技术规范》DL/T 5178-2016和合同要求。', NULL, '同意检查结论。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190022', '1648881415429554178', 33, '2021-08-11', NULL, 51, NULL, 50, 52, '2021-08-23', '2021-11-29', '2021-08-23', '2021-11-29', '2022-03-16', '符合规范，同意提交', '符合要求', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190023', '1648881418965352449', 120, '2021-03-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190024', '1648881421444186113', 120, '2021-03-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190025', '1648881415647657985', 33, '2021-06-23', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190026', '1648881415609909250', 33, '2021-07-03', NULL, 51, NULL, 50, 52, '2021-08-04', '2022-03-17', '2021-07-29', '2022-03-21', '2022-03-23', '满足用户要求，可以提交', '满足要求，可提交', '同意检查结论。', '地形图及管理记录资料已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190027', '1648881415878344705', 33, '2021-07-26', NULL, 51, NULL, 50, NULL, '2021-07-29', '2021-11-29', '2021-07-29', '2021-11-29', NULL, '满足用户要求，可以提交', '符合要求', '同意检查结论。', NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190028', '1648881421301579777', 51, '2021-07-29', NULL, 33, 53, 50, 52, '2021-12-03', '2021-12-03', '2021-07-29', '2021-12-06', '2022-03-16', '符合要求', NULL, '同意检查结论。', '坐标转换成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190029', '1648881415333085186', 39, '2021-07-30', '20210730提交技术质量部', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190030', '1648881416973058050', 101, '2021-08-27', NULL, 103, NULL, 50, 52, '2021-02-23', '2021-02-23', '2021-11-13', '2021-11-29', '2021-12-03', '满足技术设计书要求。', '经对本批内业资料进行全数检查后认为，本资料满足四川省大渡河猴子岩水电站下游河道疏浚地形图及断面测绘检查依据中相关规范要求；可提交相关部门使用。\n鉴于检查中发现的错漏，经分数评定为81.8属良级产品', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190031', '1648881416343912449', 122, '2021-08-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190032', '1648881415530217473', NULL, '2021-09-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190033', '1648881414796214274', 33, '2021-09-09', NULL, 51, NULL, 50, 52, '2021-10-08', '2021-10-08', '2021-09-23', '2021-11-29', '2022-03-16', '满足用户要求，可以提交', '经对本批内业资料进行全数检查后认为，本资料满足四川省大渡河长河坝水电站新联土料场复垦地形图测绘检查依据中相关规范要求；可提交相关部门使用。\n鉴于检查中发现的错漏，经分数评定为82.3属良级产品', '同意检查结论。', '地形图及管理记录资料已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190034', '1648881414812991489', 15, '2021-09-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190035', '1648881414456475649', 33, '2021-10-29', NULL, 51, NULL, NULL, NULL, NULL, NULL, '2021-11-01', NULL, NULL, '满足用户要求，可以提交使用', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190036', '1648881414905266178', 33, '2021-10-29', NULL, 51, NULL, 50, 52, '2021-11-01', '2021-11-29', '2021-11-01', '2021-11-29', '2022-05-17', '满足用户要求，可以提交使用', '符合要求', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190037', '1648881415047872514', 33, '2021-10-29', NULL, 51, NULL, NULL, NULL, NULL, NULL, '2021-11-01', NULL, NULL, '满足用户要求，可以提交使用', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190038', '1648881416310358017', 101, '2021-11-13', NULL, 103, NULL, 50, 52, '2021-02-23', '2021-02-23', '2021-11-13', '2021-11-29', '2021-12-03', '满足技术设计书要求。', '经对本批内业资料进行全数检查后认为，本资料满足四川省大渡河长河坝水电站新联土料场复垦地形图测绘检查依据中相关规范要求；可提交相关部门使用。\n鉴于检查中发现的错漏，经分数评定为82.7属良级产品', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190039', '1648881416276803586', 101, '2021-11-13', NULL, 103, 54, 50, 52, '2021-12-03', '2021-12-03', '2021-11-13', '2021-12-06', '2021-12-06', '满足技术设计书要求。', NULL, '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190040', '1648881415979008002', 101, '2021-11-13', NULL, 103, 55, 50, 52, '2021-11-15', '2021-11-29', '2021-11-13', '2022-03-21', '2022-03-23', '满足技术设计书要求。', '满足要求', '同意检查结论。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190041', '1648881416226471938', 101, '2021-11-13', NULL, 103, NULL, 50, 52, '2021-03-30', '2021-03-30', '2021-11-13', '2021-11-29', '2021-12-03', '满足技术设计书要求。', '经对本批内业资料进行全数检查后认为，本资料满足四川省大渡河猴子岩水电站角坝土料场地形图测绘检查依据中相关规范要求；可提交相关部门使用。\n鉴于检查中发现的错漏，经分数评定为82.3属良级产品', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190042', '1648881419405754369', 59, '2021-12-19', '涉密资料，已线下提交成果。', 142, 50, 50, 52, '2021-12-20', '2021-12-21', '2021-12-21', '2021-12-21', '2021-12-22', '复核要求。', '符合要求。', '同意检查结论。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190043', '1648881415475691522', 32, '2021-12-31', NULL, 51, 53, 50, 52, '2022-03-17', '2022-03-17', '2022-01-04', '2022-03-21', '2022-03-23', '满足用户要求，可以提供使用', '满足要求', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190044', '1648881413927993346', 113, '2022-01-10', NULL, 20, NULL, NULL, NULL, NULL, NULL, '2022-01-27', NULL, NULL, '满足规范要求', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190045', '1648881416641708034', 101, '2022-03-05', NULL, 103, NULL, NULL, NULL, NULL, NULL, '2022-03-05', NULL, NULL, '满足合同和规范要求。', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190046', '1648881414066405377', 120, '2022-03-15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190047', '1648881418302652417', 49, '2020-07-29', NULL, NULL, NULL, 50, 52, '2021-11-25', '2021-11-25', '2021-11-25', '2021-11-29', '2021-12-03', '满足用户用图要求!', '满足用户要求', '同意检查结论。', '成果表已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190048', '1648881420240420865', 61, '2020-08-20', NULL, 46, 50, 50, 52, '2020-01-09', '2020-08-25', '2020-08-23', '2020-08-25', '2020-08-25', '满足用户要求', NULL, '同意检查结论。', '配合测量无成果归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190049', '1648881418386538498', 33, '2020-08-20', NULL, 51, NULL, 50, 52, '2020-08-28', '2020-08-28', '2020-08-24', '2020-11-02', '2020-11-03', '已检查', '满足用户要求', '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190050', '1648881419313479682', 61, '2020-08-20', NULL, 46, 53, 50, 52, '2019-12-08', '2020-08-24', '2020-08-23', '2020-08-25', '2020-11-03', '满足用户要求', NULL, '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190051', '1648881419665801218', 61, '2020-08-20', NULL, 46, 50, 50, 52, '2020-02-28', '2020-08-25', '2020-08-23', '2020-08-25', '2020-08-25', '满足用户要求', NULL, '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190052', '1648881419498029057', 39, '2020-12-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190053', '1648881419363811330', 39, '2020-12-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190054', '1648881417296019457', 33, '2020-12-14', NULL, 51, NULL, 50, 52, '2021-07-29', '2021-11-29', '2021-07-29', '2021-11-29', '2021-12-03', '满足用户要求，可以提交', '符合要求', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190055', '1648881417971302402', 101, '2020-12-25', NULL, 103, 55, 50, 52, '2021-02-19', '2021-02-19', '2020-12-25', '2022-03-21', '2022-03-23', '同意', '满足要求', '同意检查结论。', '报告及已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190056', '1648881417296019457', 33, '2020-12-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190057', '1648881418524950530', 39, '2020-12-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190058', '1648881419254759426', NULL, '2020-05-21', NULL, 46, NULL, 50, 52, '2020-07-03', '2020-08-25', '2020-05-27', '2020-08-25', '2020-11-04', '满足用户要求', '批合格', '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190059', '1648881420827623425', NULL, '2020-05-21', NULL, 46, NULL, 50, 52, '2021-02-08', '2021-02-08', '2021-02-07', '2021-11-29', '2021-12-03', '满足用户要求', '满足用户需求.', '同意检查结论。', '坐标转换成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190060', '1648881418424287233', 101, '2020-06-28', NULL, 103, NULL, 50, 52, '2020-06-28', '2021-11-29', '2020-06-28', '2021-11-29', '2021-12-03', '满足规范要求', '符合要求', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190061', '1648881419057627138', 46, '2020-09-07', NULL, 83, NULL, 50, 52, '2020-03-03', '2020-09-29', '2020-09-16', '2020-09-30', '2020-10-12', '符合规范，满足要求。', NULL, '同意检查结论。', '资料已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190062', '1648881418508173314', 51, '2020-12-05', NULL, 33, NULL, 50, 52, '2020-12-08', '2022-03-17', '2020-12-05', '2022-03-21', '2022-03-23', '同意', '满足要求', '同意检查结论。', '坐标转换成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190063', '1648881419237982210', 102, '2020-01-09', NULL, 101, NULL, 50, 52, '2020-01-14', '2022-03-17', '2020-01-11', '2022-03-21', '2022-05-17', '成果满足规范要求！', '满足要求', '同意检查结论。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190064', '1648881419594498049', 102, '2019-12-06', NULL, 101, 50, 9, 15, NULL, '2019-12-23', '2019-12-06', '2019-12-30', '2020-01-07', '满足技术设计书要求。', '测绘质量符合甲方的要求，并执行了相应的规范。', '同意归档。', '同意');
INSERT INTO `cmc_archive` VALUES ('1648881566388190065', '1648881419988762625', 120, '2019-12-07', '配合放线，无成果提交', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190066', '1648881421075087361', 120, '2019-12-07', '项目未实施，无成果提交', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190067', '1648881420756320257', NULL, '2019-12-17', NULL, 46, NULL, 50, NULL, '2019-05-01', '2020-06-01', '2020-04-27', '2020-06-04', NULL, '满足用户要求', NULL, '同意检查结论。', NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190068', '1648881421351911426', 101, '2019-12-05', NULL, 103, NULL, 50, 52, '2020-03-07', '2020-08-25', '2020-03-07', '2021-11-29', '2021-12-03', '成果资料满足规范要求。', '符合项目设计书（作业计划）要求！', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190069', '1648881421414825986', 101, '2019-11-28', NULL, 103, NULL, 50, 52, '2019-12-25', '2020-08-25', '2020-03-07', '2020-08-25', '2020-08-25', '成果资料满足规范要求。', '现在场提交，边做边用。合格。', '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190070', '1648881419531583489', 120, '2019-12-07', '成果资料2019年4月已汇交资料室', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190071', '1648881419451891714', 46, '2019-11-14', NULL, 53, 50, 50, 52, '2020-05-07', '2020-12-07', '2019-11-18', '2022-05-12', '2022-05-12', '已经检查并出检查报告\n同意提交', NULL, NULL, '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190072', '1648881420290752514', 46, '2019-11-14', NULL, 50, NULL, 50, 52, '2019-01-22', '2020-08-25', '2019-12-03', '2020-08-25', '2020-08-25', '符合技术设计书要求。', '批合格', '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190073', '1648881419632246785', 61, '2019-11-11', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190074', '1648881420290752514', 46, '2019-11-14', NULL, 50, NULL, 50, 52, '2019-12-06', '2022-03-17', '2019-12-03', '2022-03-21', '2022-03-23', '符合技术设计书要求。', '满足要求', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190075', '1648881421003784193', NULL, '2020-03-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190076', '1648881419045044225', 59, '2020-03-10', NULL, 46, 53, 50, NULL, '2020-02-27', '2020-03-17', '2020-03-11', '2020-03-18', '2020-05-09', '满足用户要求', NULL, '符合技术设计书要求。', '该项目成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190077', '1648881419128930305', 59, '2020-03-11', NULL, 46, NULL, 50, 52, '2020-05-06', '2020-05-06', '2020-03-13', '2020-05-06', '2020-05-07', '已查，满足项目要求', NULL, '同意检查结论。', '已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190078', '1648881419112153089', 61, '2020-02-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190079', '1648881421003784193', NULL, '2020-03-03', NULL, 34, NULL, NULL, NULL, NULL, NULL, '2020-03-03', NULL, NULL, '满足规范和业主要求', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190080', '1648881419284119553', 101, '2020-04-15', NULL, 103, NULL, 50, 52, '2020-02-24', '2020-08-25', '2020-04-15', '2020-08-25', '2020-08-25', '已检查，并修正完善报告。', '批合格', '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190081', '1648881418625613825', 33, '2020-07-06', NULL, 51, NULL, 50, 52, '2020-07-06', '2021-11-29', '2020-07-06', '2021-11-29', '2021-12-03', '成果符号要求，可以提交用户。', '符合要求', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190082', '1648881418495590402', 39, '2020-07-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190083', '1648881420617908225', 61, '2020-08-20', NULL, 46, 50, 50, 52, '2020-02-20', '2020-08-25', '2020-08-23', '2020-08-25', '2020-08-25', '满足用户要求', NULL, '同意检查结论。', '配合测量无资料归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190084', '1648881416062894082', 101, '2021-11-13', NULL, 103, 53, 50, 52, '2021-12-03', '2021-12-03', '2021-11-13', '2021-12-06', '2021-12-06', '满足要求', NULL, '同意检查结论。', '坐标转换成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190085', '1648881415492468738', 101, '2021-11-13', NULL, 106, 55, 50, 52, '2021-11-15', '2022-01-10', '2021-11-13', '2022-03-21', '2022-03-23', '满足合同和技术设计书要求', '满足合同和技术设计要求', '同意检查结论。', '报告已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190086', '1648881415748321281', 103, '2021-11-13', NULL, 101, NULL, 50, 52, '2021-11-13', '2021-11-29', '2021-11-13', '2021-11-29', '2021-12-03', '满足技术设计书要求', '符合要求', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190087', '1648881414511001602', 33, '2021-11-16', NULL, 51, 53, 50, 52, '2021-12-03', '2021-12-03', '2021-11-22', '2021-12-06', '2021-12-15', '满足用户要求，可以提交使用', NULL, '同意检查结论。', '报告及地形图、DOM 、三维模型已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190088', '1648881417707061250', 120, '2021-03-24', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190089', '1648881415861567490', 139, '2021-05-18', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190090', '1648881418508173314', 51, '2021-07-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190091', '1648881417333768193', 102, '2021-08-18', NULL, 101, 46, 46, 52, '2021-08-27', '2021-08-27', '2021-08-27', '2024-02-20', '2024-02-21', '已完成', NULL, NULL, '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190092', '1648881418810163201', 101, '2021-08-26', NULL, 103, NULL, NULL, NULL, NULL, NULL, '2021-10-08', NULL, NULL, '满足合同要求。', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190093', '1648881415286947841', 33, '2021-10-29', NULL, 51, NULL, NULL, NULL, NULL, NULL, '2021-11-01', NULL, NULL, '满足用户要求，可以提交使用', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190094', '1648881416293580802', 101, '2021-11-13', NULL, 106, NULL, NULL, 52, '2021-11-13', '2021-11-29', '2021-11-13', '2021-11-29', '2021-12-03', '满足技术设计书要求', '符合要求', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190095', '1648881414582304770', 20, '2021-11-22', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190096', '1648881420043288578', 51, '2021-11-26', NULL, 33, 55, NULL, NULL, '2021-11-29', '2022-03-17', '2021-11-26', '2022-03-21', NULL, '符合要求', '符合要求', '同意检查结论。', NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190097', '1648881418508173314', 51, '2021-11-26', NULL, 33, 55, NULL, 52, '2021-11-30', '2022-03-17', '2021-11-26', '2022-03-21', '2022-03-23', '符合要求', '符合要求', '同意检查结论。', '坐标转换成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190098', '1648881419682578433', 51, '2021-11-26', NULL, 33, NULL, NULL, 52, '2021-11-26', '2021-11-29', '2021-11-26', '2021-11-29', '2021-12-03', '符合要求', '符合要求', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190099', '1648881419774853121', 51, '2021-11-26', NULL, 33, 55, NULL, 52, '2021-11-30', '2022-03-17', '2021-11-26', '2022-03-21', '2022-03-28', '符合要求', '符合要求', '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190100', '1648881419812601858', 51, '2021-11-26', NULL, 33, 55, NULL, 52, '2021-11-29', '2022-03-17', '2021-11-26', '2022-03-21', '2022-03-23', '符合要求', '符合要求', '同意检查结论。', '坐标转换成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190101', '1648881421041532929', 51, '2021-11-26', NULL, 33, 53, NULL, 52, '2021-12-03', '2021-12-03', '2021-11-26', '2021-12-06', '2021-12-07', '符合要求', NULL, '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190102', '1648881420651462658', 51, '2021-11-26', NULL, 33, NULL, NULL, 52, '2019-05-18', '2021-11-29', '2021-11-26', '2021-11-29', '2021-12-03', '符合要求', '单位成果综合质量评定88.48分，属“良”级品。', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190103', '1648881421301579777', 51, '2021-11-26', NULL, 33, 53, NULL, NULL, '2021-12-03', '2021-12-03', '2021-11-26', '2021-12-06', NULL, '符合要求', NULL, '同意检查结论。', NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190104', '1648881416260026369', 101, '2021-11-13', NULL, 103, NULL, NULL, 52, '2021-11-13', '2021-11-29', '2021-11-13', '2021-11-29', '2021-12-03', '满足技术设计书要求。', '符合要求', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190105', '1648881411499491371', 33, '2024-05-02', NULL, 32, 54, 46, 52, '2023-12-15', '2024-05-06', '2024-05-04', '2024-05-06', '2024-05-06', '按修改意见修改', '已检查，合格，可以提交', NULL, '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190106', '1648881411499491336', 60, '2024-05-09', NULL, 61, 53, 46, 52, '2024-05-13', '2024-05-13', '2024-05-11', '2024-05-14', '2024-05-15', '已完成部门检查。', '已经归档', NULL, '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190107', '1648881410631270435', 71, '2024-06-06', NULL, 50, 53, 46, 52, '2024-06-13', '2024-06-14', '2024-06-06', '2024-06-14', '2024-06-21', '项目质量符合设计和规范要求。', '已经归档、满足归档要求', '可归档。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190108', '1648881418508173314', 51, '2021-07-29', NULL, 33, NULL, NULL, 52, '2021-08-02', '2022-03-17', '2021-07-29', '2022-03-21', '2022-03-28', '符合要求同意提交', '符合要求', '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190109', '1648881413294653441', 113, '2022-05-30', NULL, 143, 143, 143, 52, '2022-08-08', '2022-08-07', '2022-05-30', '2022-08-07', '2022-09-26', '1.修点线矛盾\n2.补绘机耕路', '成果合格', '成果合格', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190110', '1648881410694184962', 32, '2023-06-28', NULL, 33, 54, 46, 52, '2023-07-04', '2023-07-06', '2023-06-28', '2023-07-07', '2023-07-10', '已检查', NULL, '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190111', '1648881413361762305', 59, '2023-07-03', '成果已线下汇交。', 148, 55, 46, 52, '2022-12-12', '2023-07-05', '2023-07-03', '2023-07-05', '2023-07-10', '无异议', '满足要求', '成果满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190112', '1648881411105226753', 84, '2023-07-06', NULL, 50, 53, 46, 52, '2023-07-20', '2023-08-18', '2023-07-19', '2023-08-18', '2023-08-21', '项目质量符合设计和规范要求，已归档。', '贯标资料已经打印归档（地形图已经分幅）', '成果质量和工作量满足用户要求，资料满足归档要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190113', '1648881410727739393', 143, '2023-07-12', '已提交', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190114', '1648881411499491368', 71, '2023-07-26', NULL, 50, 55, 46, 52, '2023-08-07', '2023-08-09', '2023-08-09', '2023-08-09', '2023-08-15', '项目质量符合设计和规范要求。', '资料完整，符合要求', '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190115', '1648881414641025025', 33, '2024-01-16', NULL, 50, NULL, NULL, NULL, NULL, NULL, '2024-01-22', NULL, NULL, '项目质量符合设计和规范要求。', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190116', '1648881420227837954', 59, '2024-01-23', '成果涉密，已完成线下汇交。', 148, 55, 46, 52, '2021-06-01', '2024-01-24', '2024-01-23', '2024-02-02', '2024-02-02', '同意', '满足甲方需求', '满足项目要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190117', '1648881410631270413', 71, '2023-08-05', NULL, 50, 54, 46, 52, '2023-08-03', '2023-08-14', '2023-08-09', '2023-08-14', '2023-08-15', '项目质量符合设计和规范要求。', '产品质量合格', '成果满足规范和用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190118', '1648881411499491332', 84, '2024-02-05', NULL, 50, 54, 46, 52, '2024-01-18', '2024-02-07', '2024-02-05', '2024-02-19', '2024-02-21', '项目质量符合设计和规范要求。', '质量满足设计及规范要求', '成果满足项目要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190119', '1648881412401266689', 33, '2024-05-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190120', '1648881412845862913', 33, '2024-05-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190121', '1648881410631270431', 71, '2024-06-06', NULL, 50, 53, NULL, NULL, '2024-06-13', '2024-06-14', '2024-06-06', NULL, NULL, '项目质量符合设计和规范要求。', '满足归档要求', NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190122', '1648881413529534465', 113, '2022-04-08', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190123', '1648881413030412290', 50, '2022-08-31', NULL, NULL, NULL, 46, 52, '2022-08-31', '2022-10-17', '2022-10-17', '2024-02-20', '2024-02-21', '可提交', NULL, NULL, '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190124', '1648881413395316737', 101, '2023-02-18', NULL, 109, NULL, NULL, NULL, NULL, NULL, '2023-02-19', NULL, NULL, '已检查', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190125', '1648881411868590081', 144, '2023-03-06', NULL, 116, 116, 46, 52, '2023-04-10', '2023-04-10', '2023-04-10', '2023-07-18', '2023-07-20', '中电工程安徽贵池区（秋江）100MW渔光互补光伏电站项目按照甲方任务要求勘察技术任务已完成，勘察成果资料完整，满足现行相关法规。', '中电工程安徽贵池区（秋江）100MW渔光互补光伏电站项目按照甲方任务要求勘察技术任务已完成，勘察成果资料完整，满足现行相关法规。', '成果满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190126', '1648881412493541377', 102, '2023-04-16', NULL, 101, NULL, NULL, NULL, NULL, NULL, '2023-04-16', NULL, NULL, '最终成果满足技术设计书要求', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190127', '1648881411050700802', 84, '2023-06-28', NULL, 50, 56, 46, 52, '2023-06-20', '2023-07-07', '2023-07-05', '2023-07-07', '2023-07-10', '项目质量符合设计和规范要求。', '已签收，满足要求。', '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190128', '1648881411499491374', 61, '2023-07-14', NULL, 50, 53, 46, 52, '2021-11-19', '2024-02-02', '2023-07-19', '2024-02-02', '2024-02-06', '项目质量符合设计和规范要求。', '已经归档，符合归档要求', '满足项目要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190129', '1648881410878734337', 61, '2023-07-18', NULL, 62, 54, 46, 52, '2023-07-27', '2023-08-02', '2023-08-02', '2023-08-02', '2023-08-07', '成果满足技术设计要求！', '满足用户要求', '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190130', '1648881411084255234', 66, '2024-01-02', NULL, 60, 54, 46, 52, '2023-12-20', '2024-01-10', '2024-01-10', '2024-01-10', '2024-01-10', '已按照规范资料整理。', '成果质量满足用户要求', '满足项目要求。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190131', '1648881410631270403', 32, '2023-09-07', NULL, 35, 56, 46, 52, '2023-08-22', '2023-09-07', '2023-09-07', '2023-09-08', '2023-09-11', '已检查', '已接收', '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190132', '1648881412795531265', 33, '2024-05-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190133', '1648881411667263489', NULL, '2023-02-27', NULL, 116, 116, 46, 52, '2023-03-01', '2023-03-02', '2023-02-27', '2023-07-18', '2023-07-20', '本项目外业、内业工作均按相关规程规范及业主要求执行，无违规操作，无不良质量记录。', NULL, '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190134', '1648881412631953410', 113, '2023-05-10', NULL, 148, 54, 46, 52, '2023-02-16', '2023-07-17', '2023-07-11', '2023-07-17', '2023-07-17', '无异议。', NULL, '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190135', '1648881411688235010', 59, '2023-06-28', '成果已纳入2021年度变更调查，并随其成果一并汇交', 148, 55, 46, 52, '2022-12-26', '2023-07-05', '2023-06-29', '2023-07-05', '2023-07-10', '无异议。', '满足要求', '成果满足甲方要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190136', '1648881411533045762', 71, '2023-07-07', NULL, 50, 56, 46, 52, '2023-06-20', '2023-07-07', '2023-07-07', '2023-07-07', '2023-07-10', '项目质量符合设计和规范要求。', '已签收，满足要求。', '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190137', '1648881410929065985', 84, '2023-08-23', NULL, 50, 55, 46, 52, '2023-08-21', '2023-08-25', '2023-08-24', '2023-08-29', '2023-09-11', '项目质量符合设计和规范要求。', '资料完整，满足要求', '成果资料满足要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190138', '1648881410555772930', 66, '2023-09-27', NULL, 61, 53, 46, 52, '2023-10-12', '2023-12-12', '2023-09-27', '2023-12-12', '2023-12-13', '  已进行过程检查并核实修改情况。\n  检查记录见管理记录资料。', NULL, '成果资料满足项目要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190139', '1648881414527778817', 83, '2023-11-16', NULL, 109, NULL, NULL, NULL, NULL, NULL, '2023-11-20', NULL, NULL, '满足合同和规范要求。', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190140', '1648881411499491365', 71, '2023-12-13', NULL, 50, 54, 46, 52, '2023-11-20', '2024-01-22', '2023-12-19', '2024-01-23', '2024-01-24', '项目质量符合设计和规范要求。', '项目质量符合设计及规范要求', '满足项目要求。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190141', '1648881411499491330', 71, '2024-02-02', NULL, 50, 57, 46, 52, '2024-02-05', '2024-03-11', '2024-02-02', '2024-03-15', '2024-03-21', '项目质量符合设计和规范要求。', '已检查，符合技术设计书要求。', NULL, '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190142', '1648881410631270408', 32, '2024-02-19', NULL, 37, 53, 46, 52, '2024-02-26', '2024-02-27', '2024-02-20', '2024-02-27', '2024-02-28', '已检查', '质量符合设计要求', '满足要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190143', '1648881411499491342', 84, '2024-02-19', NULL, 50, 53, 46, 52, '2024-02-23', '2024-02-27', '2024-02-19', '2024-02-27', '2024-02-28', '项目质量符合设计和规范要求。', '符合技术设计及归档要求', '满足要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190144', '1648881410610298882', 116, '2024-03-27', '仅为外业资料，已提交并交技术质量部归档', 117, NULL, NULL, NULL, NULL, NULL, '2024-03-27', NULL, NULL, '资料无误。', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190145', '1648881416578793474', 102, '2024-04-10', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190146', '1648881410631270422', 102, '2024-04-12', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190147', '1648881411499491334', 60, '2024-04-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190148', '1648881411499491372', 33, '2024-04-29', NULL, 32, 54, 46, 52, '2024-01-28', '2024-04-30', '2024-04-29', '2024-04-30', '2024-05-06', '已检查，满足要求', '产品质量合格', '已核。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190149', '1648881417400877057', 39, '2022-04-03', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190150', '1648881411847618561', 72, '2022-12-14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190151', '1648881421460963330', 112, '2023-02-02', NULL, 148, NULL, 46, NULL, '2023-02-06', '2023-02-06', '2023-02-02', '2023-07-18', NULL, '同意', NULL, '成果质量和工作量满足用户要求。', NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190152', '1648881413605031938', 112, '2023-02-02', NULL, 148, NULL, 46, NULL, '2023-02-06', '2023-02-06', '2023-02-02', '2023-07-18', NULL, '同意', NULL, '成果质量和工作量满足用户要求。', NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190153', '1648881411788898305', NULL, '2023-02-03', NULL, 116, 116, 46, 52, '2023-02-27', '2023-03-02', '2023-03-02', '2023-07-18', '2023-07-20', '本项目外业、内业工作均按相关规程规范及业主要求执行，无违规操作，无不良质量记录。', NULL, '成果满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190154', '1648881411499491329', 116, '2023-02-27', NULL, 116, 116, 46, 52, '2023-02-27', '2023-03-02', '2023-02-27', '2023-07-18', '2023-07-20', '本项目外业、内业工作均按相关规程规范及业主要求执行，无违规操作，无不良质量记录。', NULL, '成果满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190155', '1648881411788898305', NULL, '2023-02-27', NULL, 116, 116, 46, 52, '2023-02-27', '2023-03-02', '2023-03-02', '2023-07-18', '2023-07-20', '本项目外业、内业工作均按照相关规范、规程及业主要求执行，无违章操作，无不良质量记录。', NULL, '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190156', '1648881410631270406', 112, '2023-06-26', NULL, 148, 55, NULL, NULL, '2023-05-17', '2023-06-27', '2023-06-26', NULL, NULL, '无异议', '可以提交', NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190157', '1648881411252027394', 32, '2023-06-28', NULL, 33, 56, 46, 52, '2023-07-03', '2023-07-03', '2023-06-28', '2023-07-07', '2023-07-10', '已检查', '已签收', '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190158', '1648881410849374209', 32, '2023-06-28', NULL, 33, 56, 46, 52, '2023-07-03', '2023-07-03', '2023-06-28', '2023-07-07', '2023-07-10', '已检查', '已签收', '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190159', '1648881411499491384', 84, '2023-07-01', NULL, 50, 55, 46, 52, '2023-06-21', '2023-07-05', '2023-07-03', '2023-07-05', '2023-07-10', '项目质量符合设计和规范要求。', '满足要求', '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190160', '1648881412170579969', 102, '2023-07-07', NULL, 101, 57, NULL, NULL, '2023-07-07', '2023-07-18', '2023-07-07', NULL, NULL, '已经过部门级一查', '已经完成二查。', NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190161', '1648881411457548290', 71, '2023-07-07', NULL, 50, NULL, NULL, NULL, NULL, NULL, '2023-07-07', NULL, NULL, '项目质量符合设计和规范要求。', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190162', '1648881412237688834', 71, '2023-07-14', '项目取消', 50, 56, 46, NULL, '2023-06-01', '2023-07-18', '2023-07-18', '2023-07-18', NULL, '项目质量符合设计和规范要求。', '已接收', '成果质量和工作量满足用户要求。', NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190163', '1648881412220911618', 71, '2023-07-14', NULL, 50, 56, 46, 52, '2023-06-01', '2023-07-19', '2023-07-18', '2023-07-20', '2023-07-20', '项目质量符合设计和规范要求。', '已接收', '成果满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190164', '1648881410593521666', 84, '2023-07-24', NULL, 50, 54, 46, 52, '2023-07-24', '2023-07-27', '2023-07-25', '2023-07-27', '2023-07-27', '项目质量符合设计和规范要求。', NULL, '成果质量和工作量满足用户要求。', '已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190165', '1648881411499491378', 84, '2023-07-27', NULL, 50, 53, 46, 52, '2023-09-13', '2023-09-21', '2023-08-09', '2023-09-21', '2023-09-28', '项目质量符合设计和规范要求。', NULL, '已按要求归档', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190166', '1648881411499491360', 84, '2023-10-20', NULL, 50, 54, 46, 52, '2023-09-13', '2023-10-30', '2023-10-30', '2023-10-31', '2023-11-03', '项目质量符合设计和规范要求。', '项目质量符合设计和规范要求', '满足要求。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190167', '1648881414624247809', 101, '2023-11-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190168', '1648881419145707521', 61, '2020-08-20', NULL, 46, 53, NULL, 52, '2019-12-27', '2020-08-24', '2020-08-23', '2020-08-25', '2020-03-25', '已验收 满足用户要求', NULL, '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190169', '1648881419846156290', 61, '2020-08-20', NULL, 46, 50, NULL, 52, '2019-08-12', '2020-08-25', '2020-08-23', '2020-08-25', '2020-08-25', '满足用户要求', NULL, '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190170', '1648881418608836610', NULL, '2020-05-21', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190171', '1648881418541727745', 101, '2020-06-08', NULL, 103, NULL, NULL, 52, '2020-06-09', '2021-11-29', '2020-06-08', '2021-11-29', '2021-12-03', '满足精度要求', '符合要求', '同意检查结论。', '报告及地形图已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190172', '1648881418386538498', 33, '2020-07-06', NULL, 51, NULL, NULL, 52, '2020-08-28', '2020-08-28', '2020-07-06', '2020-11-02', '2020-11-04', '成果满足用户要求', '满足用户要求', '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190173', '1648881420152340482', 102, '2020-08-06', NULL, 101, 46, NULL, 52, '2019-07-08', '2020-08-18', '2020-08-07', '2020-08-19', '2020-08-20', '成果质量满足项目技术设计书要求，达到归档条件。', NULL, '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190174', '1648881418386538498', 33, '2020-08-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190175', '1648881419028267010', NULL, '2020-08-20', NULL, 46, 28, NULL, 52, '2020-10-13', '2020-10-13', '2020-08-23', '2020-10-14', '2020-10-14', '满足用户要求', '满足用户要求', '同意检查结论。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190176', '1648881418508173314', 51, '2020-12-05', NULL, 33, NULL, NULL, 52, '2020-12-08', '2022-03-17', '2020-12-05', '2022-03-21', '2022-03-28', '同意', '满足要求', '同意检查结论。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190177', '1648881413311430658', 35, '2022-05-11', NULL, 32, 54, NULL, 52, '2022-05-07', '2022-05-19', '2022-05-11', '2022-05-19', '2022-05-31', '精度满足规范要求', NULL, '同意检查结论。', '原始数据及报告已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190178', '1648881413093326850', 113, '2022-06-07', NULL, 53, 53, NULL, 52, '2022-08-18', '2022-08-18', '2022-06-08', '2022-08-18', '2022-08-23', '资料齐全，同意提交', NULL, '符合公司归档要求。', '地形图及报告已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190179', '1648881414355812353', 113, '2022-06-07', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190180', '1648881420211060738', 50, '2021-02-04', NULL, 46, 53, NULL, 52, '2022-08-18', '2022-08-18', '2021-02-04', '2022-08-18', '2022-08-19', '已查', NULL, '符合公司成果归档要求。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190181', '1648881413009440769', 50, '2022-08-31', NULL, NULL, NULL, 46, 52, '2022-08-31', '2022-10-17', '2022-10-17', '2024-02-20', '2024-02-21', '可提交', NULL, NULL, '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190182', '1648881412774559745', 101, '2022-12-21', NULL, 102, 55, 46, 52, '2023-01-13', '2023-07-24', '2023-07-12', '2023-07-24', '2023-07-24', '已进行一查并修改，满足技术设计书要求。', '满足要求', '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190183', '1648881411809869825', 35, '2023-04-17', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190184', '1648881410790653953', 39, '2023-04-30', '成果已会交技术质量部、4月10号提交模型成果、4月26号提交增加的正射影像成果。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190185', '1648881416557821953', 102, '2023-06-26', NULL, 101, NULL, NULL, NULL, NULL, NULL, '2023-06-26', NULL, NULL, '已按业主要求完成资料归档', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190186', '1648881410572550145', NULL, '2023-06-28', NULL, 83, NULL, NULL, NULL, NULL, NULL, '2023-06-29', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190187', '1648881411122003970', 33, '2023-06-28', NULL, 32, 55, 46, 52, '2023-07-05', '2023-07-05', '2023-06-29', '2023-07-07', '2023-08-15', '已检查', '满足要求', '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190188', '1648881411499491370', 71, '2023-07-07', NULL, 50, 54, 46, 52, '2023-07-07', '2023-07-17', '2023-07-10', '2023-07-17', '2023-07-17', '项目质量符合设计和规范要求。', NULL, '本项目工作满足用户需求。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190189', '1648881413860884481', 102, '2023-07-19', NULL, 101, NULL, NULL, NULL, NULL, NULL, '2023-07-21', NULL, NULL, '已通过雅砻江公司组织的年度报告验收。', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190190', '1648881410677407746', 32, '2023-07-20', NULL, 33, 56, 46, 52, '2023-06-05', '2023-07-21', '2023-07-20', '2023-07-24', '2023-07-24', '已检查', '已接收', '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190191', '1648881411138781186', 84, '2023-08-01', NULL, 50, 53, 46, 52, '2023-08-17', '2023-08-17', '2023-08-09', '2023-08-18', '2023-08-21', '项目质量符合设计和规范要求。', '符合规范要求。', '成果质量和工作量满足用户要求，资料满足归档要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190192', '1648881413844107265', 101, '2023-11-16', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190193', '1648881414175457281', 101, '2023-11-16', NULL, 109, 55, 46, 52, '2023-07-16', '2023-11-27', '2023-11-20', '2023-11-27', '2023-12-13', '满足合同和规范要求。', '满足要求', '满足项目要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190194', '1648881413328207874', 101, '2023-11-16', NULL, 109, 55, 46, 52, '2023-07-20', '2024-01-24', '2023-11-20', '2024-01-30', '2024-02-01', '满足合同和规范要求。', '满足甲方需求', '满足要求。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190195', '1648881411650486273', 101, '2023-11-16', NULL, 109, 46, 46, 52, '2023-11-21', '2024-02-20', '2023-11-20', '2024-02-20', '2024-02-21', '满足合同和规范要求。', NULL, NULL, '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190196', '1648881412090888194', 101, '2023-11-16', NULL, 109, NULL, NULL, NULL, NULL, NULL, '2023-11-20', NULL, NULL, '满足合同和规范要求。', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190197', '1648881413500174338', 32, '2022-04-02', NULL, 34, 53, NULL, 52, '2022-05-10', '2022-05-11', '2022-04-08', '2022-05-11', '2022-08-23', '产品质量合格', NULL, '符合公司归档要求。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190198', '1648881413462425602', 34, '2022-04-08', NULL, 32, 54, 46, 52, '2022-09-28', '2022-10-08', '2022-04-08', '2022-10-08', '2022-10-10', '点云采集分类精度满足规范要求，对比分析报告满足业主要求', '满足要求', '满足用户和归档要求。', '成果资料已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190199', '1648881414003490818', 113, '2022-06-07', NULL, 59, 53, NULL, NULL, '2022-10-17', '2022-10-17', '2022-06-07', NULL, NULL, '收到并确认项目', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190200', '1648881414334840833', 113, '2022-06-07', NULL, 59, NULL, 46, NULL, '2022-01-10', '2022-08-18', '2022-06-07', '2023-01-13', NULL, '收到并确认项目', '经对本批内业资料进行全数检查后认为，本资料满足四川省雅砻江牙根一级水电站产卵场1:1000地形图测绘（含水下）检查依据中相关规范要求。\n鉴于检查中发现的错漏，经分数评定为82.3属良级产品', '成果质量和工作量满足用户要求。', NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190201', '1648881412535484418', NULL, '2023-05-04', NULL, 144, 57, NULL, NULL, NULL, '2024-03-13', '2023-07-22', NULL, NULL, '符合规范要求，满足业主需要', '符合技术设计书、合同要求。', NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190202', '1648881412648730625', 84, '2022-10-20', NULL, 51, 54, 46, 52, '2022-12-17', '2022-12-17', '2022-12-14', '2022-12-20', '2022-12-26', '满足用户要求，可以提供使用', '满足用户要求', '经审核，成果资料满足提供用户使用和归档条件。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190203', '1648881413265293314', 33, '2023-06-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190204', '1648881413785387010', 102, '2023-06-26', NULL, 101, NULL, NULL, NULL, NULL, NULL, '2023-06-26', NULL, NULL, '已按业主要求完成资料归档。', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190205', '1648881411499491343', 71, '2024-03-14', NULL, 50, 54, 46, 52, '2024-01-29', '2024-03-17', '2024-03-15', '2024-03-18', '2024-03-21', '项目质量符合设计和规范要求。', '项目质量满足要求', '满足归档条件。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190206', '1648881410761293825', 102, '2023-12-13', NULL, 101, 57, NULL, NULL, '2023-12-15', '2024-03-13', '2023-12-13', NULL, NULL, '已完成部门级检查。', '符合技术设计书要求。', NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190207', '1648881411499491364', 32, '2024-01-05', NULL, 33, 53, 46, 52, '2024-01-08', '2024-01-09', '2024-01-08', '2024-01-10', '2024-01-10', '检查合格，可以提交', '已经归档、满足要求', '满足归档要求。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190208', '1648881411499491361', 84, '2024-01-10', NULL, 50, 54, 46, 52, '2023-10-31', '2024-01-15', '2024-01-12', '2024-01-15', '2024-01-15', '项目质量符合设计和规范要求。', '满足用户要求', '满足项目要求。', '资料已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190209', '1648881411499491347', 84, '2024-01-16', NULL, 50, 53, 46, 52, '2024-01-19', '2024-02-02', '2024-01-22', '2024-02-02', '2024-02-06', '项目质量符合设计和规范要求。', '符合归档要求，已经归档', '满足项目要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190210', '1648881410710962177', 83, '2024-03-26', NULL, 50, 53, 46, 52, '2023-12-03', '2024-04-03', '2024-03-28', '2024-04-03', '2024-04-03', '项目质量符合设计和规范要求。', '符合归档要求', '已核。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190211', '1648881411499491362', 83, '2024-03-26', NULL, 50, 54, 46, 52, '2023-08-31', '2024-03-29', '2024-03-28', '2024-03-29', '2024-04-01', '符合实际需求。', '符合甲方需求', '满足项目要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190212', '1648881411499491333', 60, '2024-04-12', NULL, 61, 53, 46, 52, '2024-04-11', '2024-04-15', '2024-04-14', '2024-04-15', '2024-04-17', '已完成报告编写、归档资料整理。', '已经归档', NULL, '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190213', '1648881411499491334', 60, '2024-04-16', NULL, 61, 53, 46, 52, '2024-04-19', '2024-04-23', '2024-04-19', '2024-04-23', '2024-04-24', '已完成过程检查并修改。', '符合归档要求', NULL, '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190214', '1648881410631270405', 101, '2024-04-23', NULL, 109, NULL, NULL, NULL, NULL, NULL, '2024-04-30', NULL, NULL, '满足合同和规范要求。', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190215', '1648881411826647041', 33, '2024-05-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190216', '1648881414603276289', 102, '2022-05-24', NULL, 101, NULL, NULL, NULL, NULL, NULL, '2022-05-24', NULL, NULL, '部门已一查，满足合同和本项目行业规范要求。', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190217', '1648881420479496193', 50, '2021-02-03', NULL, 46, 53, NULL, 52, '2022-08-08', '2022-08-08', '2019-02-09', '2022-08-08', '2022-08-23', '已查', NULL, '符合公司归档要求。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190218', '1648881413730861058', NULL, '2022-08-15', NULL, 39, 53, 46, 52, '2022-10-18', '2022-10-17', '2022-09-14', '2022-10-19', '2022-10-19', '该项目为委外项目，我部门并未参与相关生产检查工作。', NULL, '成果已提交用户使用，资料已归档。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190219', '1648881412875223041', 32, '2022-09-19', NULL, 34, 54, 46, 52, '2022-09-23', '2022-09-19', '2022-09-19', '2022-09-19', '2022-09-19', '产品质量合格', '产品质量合格，资料齐全', '已检查。', '成果已归档');
INSERT INTO `cmc_archive` VALUES ('1648881566388190220', '1648881412002807809', 72, '2022-12-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190221', '1648881412552261633', NULL, '2023-05-04', NULL, 144, 56, 46, 52, '2023-03-22', '2023-07-24', '2023-05-04', '2023-07-24', '2023-07-24', '符合规范要求，满足业主需要', '已接收', '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190222', '1648881410534801409', NULL, '2023-06-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190223', '1648881411633709057', 39, '2023-07-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190224', '1648881410480275457', 33, '2023-09-08', NULL, 32, 53, 46, 52, '2023-11-15', '2024-01-10', '2023-09-11', '2024-01-10', '2024-01-10', ' 满足规范要求', '已归档', '满足归档要求。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190225', '1648881411499491367', 71, '2023-08-17', NULL, 50, 53, 46, 52, '2023-08-28', '2023-08-31', '2023-08-18', '2024-02-02', '2024-02-06', '项目质量符合设计和规范要求。', '符合归档要求', '满足项目要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190226', '1648881411499491357', 84, '2023-09-13', NULL, 50, 53, 46, 52, '2023-09-15', '2023-09-15', '2023-09-15', '2023-09-21', '2023-09-28', '项目质量符合设计和规范要求。', NULL, '满足归档要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190227', '1648881410643853314', 71, '2023-12-13', NULL, 50, 54, 46, 52, '2023-10-08', '2024-02-02', '2023-12-19', '2024-02-02', '2024-02-06', '项目质量符合设计和规范要求。', '项目质量满足用户要求及符合设计要求', '满足项目要求。', '2023年项目资料已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190228', '1648881411499491354', 84, '2024-01-11', NULL, 50, 54, 46, 52, '2023-12-25', '2024-01-15', '2024-01-12', '2024-01-15', '2024-01-15', '项目质量符合设计和规范要求。', '项目质量满足用户、设计要求。', '满足项目要求。', '资料已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190229', '1648881410631270418', 102, '2024-03-22', NULL, 101, NULL, NULL, NULL, NULL, NULL, '2024-06-13', NULL, NULL, '已通过甲方验收', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190230', '1648881410631270430', 76, '2024-04-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190231', '1648881411499491351', 84, '2024-04-28', NULL, 50, 53, 46, 52, '2024-05-06', '2024-05-08', '2024-04-29', '2024-05-08', '2024-05-10', '项目质量符合设计和规范要求。', '符合归档要求', '已核。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190232', '1648881410832596993', 33, '2024-05-02', NULL, 32, 53, 46, 52, '2024-05-08', '2024-05-08', '2024-05-04', '2024-05-08', '2024-05-09', '按修改意见修改', '按要求归档', NULL, '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190233', '1648881412296409090', 33, '2024-05-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190234', '1648881412573233153', 33, '2024-05-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190235', '1648881412715839489', 33, '2024-05-02', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190236', '1648881410631270416', 116, '2024-06-04', '勘察报告已提交甲方，勘察费用已全部回款', 119, 116, 46, NULL, '2024-06-12', '2024-06-12', '2024-06-12', '2024-06-12', NULL, '满足勘察技术要求。', '勘察成果报告复核勘察技术要求，质量合格', '满足专业归档要求。', NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190237', '1648881413751832578', 113, '2022-04-26', NULL, 50, 55, 46, 52, '2022-05-27', '2022-10-17', '2022-05-24', '2023-01-13', '2023-07-20', '符合要求。', '符合要求', '成果质量和工作量满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190238', '1648881413181407233', 32, '2022-08-19', NULL, 34, 53, 46, 52, '2022-08-23', '2022-08-23', '2022-08-19', '2022-08-30', '2022-10-18', '产品质量合格', NULL, '已核。', '资料已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190239', '1648881418940186626', 112, '2023-02-02', NULL, 148, NULL, 46, NULL, '2023-02-06', '2023-02-06', '2023-02-02', '2023-07-18', NULL, '同意', NULL, '成果质量和工作量满足用户要求。', NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190240', '1648881410815819777', 35, '2023-06-28', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190241', '1648881411017146369', 71, '2023-07-07', NULL, 50, NULL, NULL, NULL, NULL, NULL, '2023-07-07', NULL, NULL, '项目质量符合设计和规范要求。', NULL, NULL, NULL);
INSERT INTO `cmc_archive` VALUES ('1648881566388190242', '1648881412254466049', 71, '2023-07-14', NULL, 50, 56, 46, 52, '2023-06-01', '2023-07-19', '2023-07-19', '2023-07-20', '2023-07-20', '项目质量符合设计和规范要求。', '已接收', '成果满足用户要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190243', '1648881410631270417', 112, '2023-11-29', NULL, 148, 53, 46, 52, '2024-02-26', '2024-02-27', '2023-11-29', '2024-02-27', '2024-02-28', '同意归档。', '符合归档要求', '满足要求。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190244', '1648881411499491363', 32, '2024-01-05', NULL, 33, 53, 46, 52, '2024-01-09', '2024-01-09', '2024-01-08', '2024-01-10', '2024-01-10', '检查合格可以提交', '已经归档、符合提交要求', '满足归档要求。', '成果已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190245', '1648881411499491337', 46, '2024-01-23', NULL, 54, 54, 46, 52, '2023-12-21', '2024-01-24', '2024-01-24', '2024-01-24', '2024-01-24', '收集的数据满足用户需求', '收集的资料满足用户需求', '项目暂时停止，资料公司归档。', '资料公司已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190246', '1648881411138781189', 112, '2024-02-29', NULL, 148, 53, 46, 52, '2024-03-12', '2024-03-19', '2024-03-08', '2024-03-19', '2024-03-21', '无异议', '满足归档要求', '已核。', '已归档。');
INSERT INTO `cmc_archive` VALUES ('1648881566388190247', '1648881410631270423', 71, '2024-04-01', NULL, 50, 55, 46, 52, '2024-04-08', '2024-04-07', '2024-04-01', '2024-04-30', '2024-05-06', '项目质量符合设计和规范要求。', '满足规范要求', '已核。', '已归档。');

-- ----------------------------
-- 61、cmc保证金审批表
-- ----------------------------
drop table if exists `cmc_deposit`;
create table `cmc_deposit`  (
  `deposit_id` 				char(19)  		not null 	comment '保证金审批id',
  `deposit_type` 			char(1)  		default null comment '保证金类型',
  `tender_id` 				int  			default null comment '投标项目id',
  `contract_id` 			char(19)  		default null comment '合同id',
  `return_time` 			date			default null comment '预计退还日期',
  `account_name` 			varchar(50)		default null comment '开户名称',
  `account_bank` 			varchar(20)		default null comment '开户银行',
  `card_number` 			char(25)		default null comment '银行卡号',
  `deposit_way` 			char(1)			default null comment '保证金形式',
  `applier` 				bigint			default null comment '申请人',
  `apply_time` 				date			default null comment '申请日期',
  `apply_reason` 			varchar(255)	default null comment '申请说明',
  `apply_document` 			varchar(255)	default null comment '相关附件',
  `manager_comment` 		varchar(255)	default null comment '分管审批意见',
  `manager_time` 			date			default null comment '分管审批时间',
  `manager_user_id` 		bigint			default null comment '分管审批人',
  `remit_time` 				date			default null comment '汇款日期',
  `cw_time` 				date			default null comment '财务处理时间',
  `back_time` 				date			default null comment '退还时间',
  `cw_comment` 				varchar(255)	default null comment '财务打款备注',
  `cw_user_id` 				bigint			default null comment '财务处理人',
  `remit_document` 			varchar(255)  	default null comment '汇款凭证',
  primary key (`deposit_id`)
) engine = innodb comment = 'cmc保证金审批表';

-- ----------------------------
-- 初始化-保证金审批表数据
-- ----------------------------
INSERT INTO `cmc_deposit` VALUES ('1648881410631270001', '0', NULL, NULL, '2023-10-13', '重庆联合产权交易所集团股份有限公司', '上海浦东发展银行股份有限公司重庆分行', '8301098927433', '1', 27, '2023-09-08', NULL, NULL, '已登记，谢谢！', '2023-09-08', 22, NULL, '2023-09-08', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631280002', '0', 29, NULL, '2023-04-12', '四川槽渔滩水电股份有限公司', '中国农业银行洪雅县支行', '22410201040001016', '1', 27, '2023-03-22', NULL, NULL, '已知晓，谢谢！', '2023-03-22', 22, NULL, '2023-03-22', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631290003', '0', 37, NULL, '2023-10-31', '中国华能集团有限公司北京招标分公司', '中信银行北京来福士支行', '3110730029520102162', '1', 24, '2023-10-11', '招标项目结束后，最迟在招标人与中标人签订合同后5日内将按投标人保证金汇款路径原路退还保证金', NULL, '已知晓，谢谢！', '2023-10-11', 22, NULL, '2023-10-11', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631300004', '0', NULL, NULL, NULL, '三峡国际招标有限责任公司 ', '广发银行北京分行上地支行', '6232593799008407374', '1', 26, '2023-11-09', '保证金已于2023年10月13号缴纳   补保证金登记流程', NULL, '已知晓，谢谢！', '2023-11-09', 22, NULL, '2023-11-09', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631310005', '0', NULL, NULL, '2023-12-31', '正源信通项目管理有限公司', '建行包头青山支行', '15001716677059666666', '1', 24, '2023-11-27', NULL, NULL, '已知晓，谢谢！', '2023-11-27', 22, NULL, '2023-11-27', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631320006', '0', NULL, NULL, '2024-05-22', '国家能源集团国际工程咨询有限公司', '平安银行北京神华支行', '62130000523099', '1', 24, '2024-04-07', '大渡河公司猴子岩水电站库区及枢纽区变形观测服务公开招标投标保证金', NULL, '已知晓，谢谢！', '2024-04-07', 22, NULL, '2024-04-07', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631330007', '0', NULL, NULL, NULL, '中国电能成套设备有限公司', '广发银行股份有限公司北京万柳支行', '6232593799010501024', '1', 25, '2024-06-18', NULL, NULL, '已知晓，谢谢！', '2024-06-18', 22, NULL, '2024-06-18', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631340008', '0', 38, NULL, '2023-11-30', '国家能源集团国际工程咨询有限公司', '平安银行北京神华支行', '62130000477464', '1', 24, '2023-10-11', '招标人最迟将在与中标人签订合同后5日内，向未中标的投标人和中标人退还投标保证金。投标保证金以现金或者支票形式递交的，还应退还银行同期存款利息', NULL, '已知晓，谢谢！', '2023-10-11', 22, NULL, '2023-10-11', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631350009', '0', NULL, NULL, '2023-03-03', '中投咨询有限公司', '中信银行北京交大支行', '3110710014892334223', '1', 24, '2023-02-08', '雅砻江牙根二级水电站界桩埋设服务（项目编号：000645-23ZB0066/01）', NULL, NULL, '2023-02-08', 22, NULL, '2023-02-08', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631360010', '0', NULL, NULL, '2023-03-31', '国家能源集团国际工程咨询有限公司', '平安银行北京神华支行', '62130000406253', '1', 26, '2023-02-17', '补录投标保证金信息  本项目保证金2023.1.13已缴纳', NULL, NULL, '2023-02-17', 22, NULL, '2023-02-17', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631370011', '0', NULL, NULL, '2023-06-05', '成都市公共资源交易服务中心', '成都银行琴台支行', '1001953007831939', '1', 27, '2023-05-15', NULL, NULL, '已知晓，谢谢！', '2023-05-15', 22, NULL, '2023-05-15', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631380012', '0', NULL, NULL, '2024-08-01', '江苏省设备成套股份有限公司', '兴业银行南京江北新区支行', '409620100100030316017247', '1', 27, '2024-06-18', NULL, NULL, '已知晓，谢谢！', '2024-06-18', 22, NULL, '2024-06-18', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631390013', '0', 12, NULL, NULL, '平安银行股份有限公司北京神华支行', '平安银行股份有限公司北京神华支行', '62130000412609', '1', 25, '2023-03-16', NULL, NULL, '已知晓，谢谢！', '2023-03-16', 22, NULL, '2023-03-16', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631400014', '0', NULL, NULL, '2023-04-12', '三峡国际招标有限责任公司', '广发银行北京分行上地支行', '6232593799006875184', '1', 24, '2023-03-16', NULL, NULL, '已知晓，谢谢！', '2023-03-16', 22, NULL, '2023-03-16', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631410015', '0', 24, NULL, '2023-05-10', '国家能源集团国际工程咨询有限公司', '平安银行北京神华支行', '62130000427410', '1', 26, '2023-05-10', NULL, NULL, '已知晓，谢谢！', '2023-05-10', 22, NULL, '2023-05-10', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631420016', '0', 35, NULL, '2023-10-31', '中国水利电力物资华南有限公司', '中信银行北京石景山支行', '3110730018260002904', '1', 24, '2023-10-11', '未中标投标人的投标保证金，将在书面合同签订后5日内退还；中标人的投标保证金在书面合同签订、提交履约担保、扣除招标代理服务费后退还余款。', NULL, '已知晓，谢谢！', '2023-10-11', 22, NULL, '2023-10-11', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631430017', '0', NULL, NULL, '2023-11-24', '云南招标股份有限公司', '富滇银行股份有限公司昆明科技支行', '021000146036', '1', 27, '2023-10-16', NULL, NULL, '已知晓，谢谢！', '2023-10-16', 22, NULL, '2023-10-16', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631440018', '0', NULL, NULL, '2024-07-01', '国家能源集团国际工程咨询有限公司', '平安银行北京神华支行', '62130000532471', '1', 27, '2024-05-09', '大渡河公司老鹰岩一级、二级水电站工程测量中心服务公开招标保证金', NULL, '已知晓，谢谢！', '2024-05-09', 22, NULL, '2024-05-09', NULL, NULL, NULL, NULL);
INSERT INTO `cmc_deposit` VALUES ('1648881410631450019', '0', NULL, NULL, '2024-08-02', '国家能源集团国际工程咨询有限公司', '平安银行北京神华支行', '62130000550348', '1', 24, '2024-06-25', NULL, NULL, NULL, '2024-06-25', 22, NULL, '2024-06-25', NULL, NULL, NULL, NULL);

-- ----------------------------
-- 62、cmc结算审批表
-- ----------------------------
drop table if exists `cmc_settle`;
create table `cmc_settle`  (
  `settle_id` 				char(19)  		not null 	comment '结算审批id',
  `project_id` 				char(19)  		default null comment '项目id',
  `workload_report` 		text  			default null comment '工作量上报说明',
  `reporter` 				bigint  		default null comment '上报人',
  `report_time` 			date			default null comment '上报日期',
  `settle_comment` 			varchar(255)	default null comment '结算说明',
  `zh_user_id` 				bigint  		default null comment '综合事务部审核人',
  `zh_time` 				date			default null comment '综合事务部审核日期',
  `zh_comment` 				varchar(255)	default null comment '综合事务部审核意见',
  `js_user_id` 				bigint  		default null comment '技术质量部审核人',
  `js_time` 				date			default null comment '技术质量部审核日期',
  `js_comment` 				varchar(255)	default null comment '技术质量部审核意见',
  `jy_user_id` 				bigint  		default null comment '经营发展部审核人',
  `jy_time` 				date			default null comment '经营发展部审核日期',
  `jy_comment` 				varchar(255)	default null comment '经营发展部审核意见',
  `manager_user_id` 		bigint  		default null comment '分管审核人',
  `manager_time` 			date			default null comment '分管审核日期',
  `manager_comment` 		varchar(255)	default null comment '分管审核意见',
  `gm_user_id` 				bigint  		default null comment '总经理审核人',
  `gm_time` 				date			default null comment '总经理审核日期',
  `gm_comment` 				varchar(255)	default null comment '总经理审核意见',
  `dsz_user_id` 			bigint  		default null comment '董事长审核人',
  `dsz_time` 				date			default null comment '董事长审核日期',
  `dsz_comment` 			varchar(255)	default null comment '董事长审核意见',
  `settle_document` 		varchar(255)	default null comment '原始结算表',
  `modify_document` 		varchar(255)	default null comment '修改结算表',
  `final_document` 			varchar(255)	default null comment '最终结算表',
  primary key (`settle_id`)
) engine = innodb comment = 'cmc结算审批表';

-- ----------------------------
-- 初始化-结算审批表数据
-- ----------------------------
INSERT INTO `cmc_settle` VALUES ('1648881415047870001', '1648881420936675329', NULL, 10, NULL, '东南亚国外项目，外业按内部标准增加50%。本项目不再报销其他费用。', NULL, '2019-11-11', '已提交', 50, '2019-12-04', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870002', '1648881420227837954', NULL, 10, NULL, '项目整体委托管理费用，不再报销其他费用。', NULL, '2019-11-12', '已提交', 50, '2019-11-18', '电子版本归档。', NULL, NULL, NULL, 10, '2019-11-26', '同意结算。', 2, '2019-12-05', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870003', '1648881421301579777', NULL, 10, '2019-11-29', NULL, NULL, '2019-11-29', '已提交', 50, '2019-12-02', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870004', '1648881420118786049', NULL, 10, '2019-11-29', NULL, NULL, '2019-11-29', '已提交', 50, '2019-12-02', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-12-24', '同意结算。', 2, '2021-02-01', ' 同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870005', '1648881420827623425', NULL, 10, '2019-11-29', NULL, NULL, '2019-11-29', '已提交', 50, '2019-12-02', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870006', '1648881421368688642', NULL, 10, '2019-11-29', NULL, NULL, '2019-11-29', '已提交', 50, '2019-12-02', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870007', '1648881419774853121', NULL, 10, '2019-11-29', NULL, NULL, '2019-11-29', '已提交', 50, '2019-12-02', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870008', '1648881420970229761', NULL, 10, '2019-11-29', NULL, NULL, '2019-12-06', '已提交', 50, '2019-12-06', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870009', '1648881420513050625', NULL, 10, '2019-12-05', '由于甲方要求变化，孟底沟、楞古、牙根二级、两河口均两次以上内业工作，因此内业按公司内部标准的2倍计算。', NULL, '2019-12-06', '已提交', 50, '2019-12-06', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870010', '1648881419347034113', NULL, 10, '2019-12-05', NULL, NULL, '2020-04-08', '仪器完好归还', 50, '2020-12-08', '1.收到日期:2019年12月27日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：地形图：86.30分，DOM：92分，实景三维模型：95分。', NULL, NULL, NULL, 10, '2021-03-25', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870011', '1648881419632246785', NULL, 10, '2019-12-05', NULL, NULL, '2019-12-06', '已提交', 50, '2019-12-11', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-01-07', '同意结算。', 2, '2020-02-23', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870012', '1648881419405754369', NULL, 10, NULL, '项目总体委托管理费用，不再报销其他费用。', NULL, '2019-11-12', '已提交', 50, '2019-11-18', NULL, NULL, NULL, NULL, 10, '2019-11-26', '同意结算。', 2, '2019-12-05', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870013', '1648881419451891714', NULL, 10, NULL, '按约定的项目总体委托费用（合同金额30%，不包含第三方质检费用）结算，不再报销其他费用。', NULL, '2019-11-19', '已提交', 50, '2019-11-20', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2019-12-18', '同意结算。', 2, '2020-02-23', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870014', '1648881420290752514', NULL, 10, NULL, NULL, NULL, '2019-11-19', '已提交', 50, '2019-11-20', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870015', '1648881419422531586', NULL, 10, NULL, NULL, NULL, '2019-11-11', '仪器完好归还', 50, '2019-12-02', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-01-07', '同意结算。', 2, '2020-02-15', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870016', '1648881419313479682', NULL, 61, '2020-04-07', '项目较小，不单独扣除质量保证金', NULL, '2020-04-08', '仪器完好归还', 50, '2020-04-13', '1.收到日期:2020年2月28日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：87.05分。', NULL, NULL, NULL, 10, '2020-09-07', '同意结算。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870017', '1648881419594498049', NULL, 10, NULL, '按合同金额的25%结算，不再报销其他费用。', NULL, '2019-11-11', '天宝电池头坏（413169195）', 50, '2019-11-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870018', '1648881421108641794', NULL, 10, NULL, '项目地点分散、工作量小，按项目约定委托费用结算。', NULL, '2019-11-11', '已提交', 50, '2019-11-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870019', '1648881420315918338', NULL, 10, '2019-11-07', NULL, NULL, '2019-11-11', '已提交', 50, '2019-11-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870020', '1648881420194283521', NULL, 10, NULL, '不再报销租船等其他费用', NULL, '2019-11-12', '已提交', 50, '2019-11-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2021-05-14', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870021', '1648881419682578433', NULL, 10, NULL, '卡拉、杨房沟、二滩，测区分散、交通不便，地形图外业按困难地区结算。本项目用车主要为进出场和工地转场，不扣汽车台班费。', NULL, '2019-11-12', '已提交', 50, '2019-11-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870022', '1648881419237982210', NULL, 10, '2019-11-28', '根据公司与项目议定的结算方式结算项目经费。除公司车辆燃油费、通行费、人员进出场（成都-桐子林）车票据实报销以外，不再报销其他费用。', NULL, '2019-11-29', '已提交', 50, '2019-12-11', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-01-07', '同意结算。', 2, '2020-02-23', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870023', '1648881420374638594', NULL, 10, NULL, '非洲外业，按内部标准增加60%。', NULL, '2019-11-12', '已提交', 50, '2019-11-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870024', '1648881419812601858', NULL, 10, '2019-11-29', NULL, NULL, '2019-11-29', '已提交', 50, '2019-12-02', NULL, NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870025', '1648881419439308802', NULL, 10, NULL, NULL, NULL, '2019-11-08', '该项目已结束，设备已归还综合事务部。', 50, '2019-12-02', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870026', '1648881420081037314', NULL, 10, NULL, NULL, NULL, '2019-11-12', '已提交', 50, '2019-11-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870027', '1648881420584353793', NULL, 10, NULL, NULL, NULL, '2019-11-19', '已提交', 50, '2019-11-25', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870028', '1648881419883905026', NULL, 10, '2019-12-05', NULL, NULL, '2019-12-06', '已提交', 50, '2019-12-06', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2021-04-29', '同意结算。', 2, '2021-06-21', '同意上述意见。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870029', '1648881420173312002', NULL, 10, '2019-12-05', NULL, NULL, '2019-12-06', '已提交', 50, '2019-12-09', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870030', '1648881420412387330', NULL, 10, NULL, '零星项目任务，按配合测量结算。', NULL, '2019-11-11', '已提交', 50, '2019-11-26', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870031', '1648881419376394242', NULL, 10, '2019-11-28', '总体包干委托费用，不再报销其他开支。按公司收款进度支付结算，不预扣质量保证金。', NULL, '2019-11-29', '已提交', 50, '2019-12-06', '项目质量符合设计和规范要求。', NULL, NULL, NULL, 10, '2020-01-14', '同意结算。', 2, '2020-02-15', '同意结算，请项目负责人按照工程进度比例将结算经费分配到参与人员个人名下。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870032', '1648881419388977153', NULL, 10, '2019-11-29', '项目总体委托费用按合同金额40%结算，不再报销其他开支。按公司收款进度支付结算，不预扣质量保证金。', NULL, '2019-12-06', '已提交', 50, '2019-12-17', '未完成。按照公司收款进度支付。', NULL, NULL, NULL, 10, '2020-04-30', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。\n李旭应得部分须与岗位绩效适当冲抵。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870033', '1648881419955208193', NULL, 10, NULL, NULL, NULL, '2019-11-12', '已提交', 50, '2019-11-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870034', '1648881420794068994', NULL, 10, NULL, '本项目外业与2019C19同期开展，外业进出场费用结算至2019C19项目。', NULL, '2019-11-26', '仪器完好归还', 50, '2019-12-02', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870035', '1648881419112153089', NULL, 61, '2020-04-16', '购买影像费用不扣质保金', NULL, '2020-04-16', '仪器完好归还', 50, '2020-04-16', '1.收到日期:2020年1月2日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：85.63分。', NULL, NULL, NULL, 10, '2021-02-24', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870036', '1648881420617908225', '按业主签单工作量填报。', 61, '2020-04-16', NULL, NULL, '2020-04-16', '仪器完好归还', 50, '2020-04-16', '1.收到日期:配合工作，符合要求。\n2.工作量确认：配合工作，确认正确。\n3.质量评分：配合工作，符合要求。', NULL, NULL, NULL, 10, '2021-02-05', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870037', '1648881420240420865', '按业主签单工作量填报，含其他两次溪洛渡配合。', 61, '2020-04-16', '配合测量不扣除质量保证金', NULL, '2020-04-16', '仪器完好归还', 50, '2020-04-16', '1.收到日期:配合工作，符合要求。\n2.工作量确认：配合工作，确认正确。\n3.质量评分：配合工作，符合要求。', NULL, NULL, NULL, 10, '2021-02-05', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870038', '1648881419254759426', NULL, 83, '2020-05-21', NULL, NULL, '2020-06-05', '仪器完好归还', 50, '2020-06-10', '1.收到日期:2020年2月29日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：88.96分。', NULL, NULL, NULL, 10, '2021-02-07', '同意结算。此结算是2019-2020年测次，不属于2021再次进场作业。', 2, '2021-06-21', '同意上述结算意见，可以按照规定流程办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870039', '1648881418608836610', '中桩1255个、特征点652个、边桩点1102个，完成线路总长17.816km。', 83, '2020-05-21', NULL, NULL, '2020-06-05', '仪器完好归还', 50, '2020-06-06', '1.收到日期:2020年8月12日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：87.80分。', NULL, NULL, NULL, 10, '2021-09-26', '同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870040', '1648881421385465858', NULL, 10, '2020-12-23', NULL, NULL, '2020-12-28', '仪器设备已归还。', 50, '2020-12-28', '1.收到日期:2020年3月13日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.80分。', NULL, NULL, NULL, 10, '2021-09-23', '同意结算。', 2, '2021-12-07', '同意上述意见，可以按照结算规定走支付流程。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870041', '1648881419221204993', NULL, 61, '2020-04-08', NULL, NULL, '2020-04-16', '仪器完好归还', 50, '2020-04-17', '1.收到日期:2020年2月17日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：87.80分。', NULL, NULL, NULL, 10, '2021-02-08', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870042', '1648881418625613825', '三维测图，4类', 33, '2020-12-05', NULL, NULL, '2020-12-07', '已归还', 50, '2020-12-08', '1.收到日期:2020年10月。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：84.93分。', NULL, NULL, NULL, 10, '2021-04-27', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870043', '1648881419271536642', NULL, 10, '2019-12-11', NULL, NULL, '2019-12-13', '已提交     ', 50, '2019-12-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-01-07', '同意结算。', 2, '2020-02-15', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870044', '1648881419162484738', NULL, 10, '2019-12-17', '进出场12人.天，该项目因冰雪阻碍现场等待15人.天，因甲方原因，波罗重复进出场6人.天。', NULL, '2019-12-17', '已提交     ', 50, '2020-01-17', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2021-01-05', '同意结算。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870045', '1648881421242859521', NULL, 10, '2019-12-05', '外业地形图测绘，小面积按困难地区增加10%。', NULL, '2019-12-06', '已提交', 50, '2019-12-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870046', '1648881419191844866', NULL, 10, '2020-01-13', NULL, NULL, '2020-01-13', '已提交     领用日期2019年11月29日      归还日期2019年12月4日', 50, '2020-01-19', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-04-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870047', '1648881419284119553', NULL, 10, '2019-11-28', NULL, NULL, '2019-11-29', '已提交', 50, '2019-12-02', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-01-07', '同意结算。', 2, '2020-02-23', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870048', '1648881420861177858', NULL, 10, NULL, NULL, NULL, '2019-11-08', '该项目已结束，设备已归还综合事务部。', 50, '2019-12-02', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870049', '1648881419703549953', NULL, 10, '2019-12-05', NULL, NULL, '2019-12-06', '已提交', 50, '2019-12-06', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-12-24', '同意结算。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870050', '1648881419988762625', NULL, 10, '2019-12-05', NULL, NULL, '2019-12-06', '已提交', 50, '2019-12-09', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-04-30', '同意结算。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870051', '1648881421351911426', NULL, 10, '2019-12-05', NULL, NULL, '2019-12-06', '已提交', 50, '2019-12-06', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870052', '1648881421142196225', NULL, 10, '2019-12-06', NULL, NULL, '2019-12-09', '已提交     ', 50, '2019-12-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870053', '1648881419498029057', NULL, 10, '2019-12-11', NULL, NULL, '2019-12-13', '已提交    ', 50, '2019-12-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-13', '同意结算。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870054', '1648881419649024001', NULL, 10, '2019-12-13', NULL, NULL, '2019-12-13', '已提交    ', 50, '2019-12-13', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-01-07', '同意结算。', 2, '2020-02-15', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870055', '1648881421414825986', NULL, 10, '2019-12-05', NULL, NULL, '2019-12-06', '已提交', 50, '2019-12-06', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870056', '1648881420685017090', NULL, 10, '2019-12-06', NULL, NULL, '2019-12-09', '已提交     领用日期2019年10月21日      归还日期2019年11月4日', 50, '2020-01-19', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-04-30', '同意结算，减扣汽车台班费后实际结算26793元。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870057', '1648881421335134209', NULL, 83, '2019-11-07', NULL, NULL, '2019-11-11', '已提交', 50, '2020-01-19', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-04-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870058', '1648881419468668930', NULL, 10, NULL, '分公司人员、车辆、仪器等费用，按公司结算标准增加80%计算。', NULL, '2019-11-11', '全站仪 4k2760不测距坏', 50, '2019-11-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-01-07', '同意结算', 2, '2020-02-23', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870059', '1648881420479496193', NULL, 10, NULL, '将2016年至2017年江西抚州水环境测绘项目地形图测绘、控制测量、测绘报告、检查报告、工作量统计等资料，按水环境工程处要求，分别整理为8个项目资料。', 50, '2019-11-25', NULL, 50, '2019-11-25', NULL, NULL, NULL, NULL, 10, '2020-04-28', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870060', '1648881420152340482', NULL, 10, NULL, NULL, NULL, '2019-11-12', '已提交', 46, '2019-11-14', '已检查、归档', NULL, NULL, NULL, 10, '2019-11-28', '同意结算。', 2, '2019-12-05', '同意按此结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870061', '1648881419741298689', NULL, 10, NULL, NULL, NULL, '2019-11-08', '该项目已结束，设备已归还综合事务部。', 50, '2019-12-02', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-01-07', '同意结算。', 2, '2020-02-25', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870062', '1648881420445941761', NULL, 10, '2019-12-05', NULL, NULL, '2019-12-06', '已提交', 50, '2019-12-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870063', '1648881419531583489', NULL, 10, '2019-12-17', NULL, NULL, '2020-01-02', '已提交    ', 50, '2020-01-03', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-01-07', '同意结算', 2, '2020-02-23', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870064', '1648881419581915137', NULL, 10, '2019-12-06', NULL, NULL, '2019-12-09', '已提交     ', 50, '2019-12-09', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-04-30', '同意结算。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870065', '1648881420269780994', NULL, 10, '2019-12-06', NULL, NULL, '2019-12-09', '已提交', 50, '2019-12-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870066', '1648881421175750658', NULL, 61, '2020-04-07', '项目作业点分散，不扣', NULL, '2020-12-07', '仪器完好归还', 50, '2020-04-14', '1.收到日期:2019年10月23日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：84.49分。', NULL, NULL, NULL, 10, '2021-03-02', '经校核，实际结算41410元，外业质保金3256元。\n同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870067', '1648881419665801218', NULL, 61, '2020-04-08', '以上标准按困难地区执行', NULL, '2020-04-16', '仪器完好归还', 50, '2020-04-16', '1.收到日期:2020年2月27日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.25分。', NULL, NULL, NULL, 10, '2020-12-17', '按结算表准，减扣汽车台班费、外业实测编图费用。\n同意结算。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870068', '1648881419330256897', NULL, 61, '2020-04-08', NULL, NULL, '2020-04-16', '仪器完好归还', 50, '2020-04-20', '1.收到日期:2020年2月28日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：85.50分。', NULL, NULL, NULL, 10, '2021-02-24', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870069', '1648881419179261954', NULL, 61, '2020-04-08', '以上标准参照困难地区执行', NULL, '2020-04-16', '仪器完好归还', 50, '2020-04-16', '1.收到日期:2020年2月28日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：83.64分。', NULL, NULL, NULL, 10, '2021-02-24', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870070', '1648881419208622081', NULL, 61, '2020-04-07', NULL, NULL, '2020-04-08', '仪器完好归还', 50, '2020-04-13', '1.收到日期:2019年12月10日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：87.05分。', NULL, NULL, NULL, 10, '2021-06-25', '同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870071', '1648881419846156290', NULL, 61, '2020-04-07', '项目较小，不单独扣除质量保证金。地形图编辑由中心外业人员完成，费用结算给外业。', NULL, '2020-04-08', '仪器完好归还', 50, '2020-04-13', '1.收到日期:2019年11月5日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：87.5分。', NULL, NULL, NULL, 10, '2020-09-07', '同意结算。', 2, '2021-02-01', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870072', '1648881420651462658', NULL, 10, '2020-12-07', '外业总费用7000元委托（苟开顺），（刘非）现金代支付，补航测遥感中心税款350元。', NULL, '2020-12-07', '未借仪器设备。', 50, '2020-12-08', '1.收到日期:2019年5月18日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：88.48分。', NULL, NULL, NULL, 10, '2021-02-24', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870073', '1648881420756320257', NULL, 10, '2020-12-07', '带状地形图测绘（宽40m，长2.5km），总价委托四川天宇测绘。', NULL, '2020-12-07', '设备已归还。', 50, '2020-12-07', '1.收到日期:2019年5月10日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：87.24分。', NULL, NULL, NULL, 10, '2021-02-24', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870074', '1648881420336889857', NULL, 10, NULL, '外业配合测量期间承担零星项目，无汽车台班费。', NULL, '2019-11-12', '已提交', 50, '2019-11-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870075', '1648881420257198082', NULL, 10, NULL, '工作量小，难度大，外业按配合测量结算，内业增加20%。', NULL, '2019-11-08', '该项目已结束，设备已归还综合事务部。', 50, '2019-12-02', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870076', '1648881419917459457', NULL, 10, NULL, '项目整体委托费用，不再报销其他开支。', NULL, '2019-11-19', '全站仪4K0778电池铜针头坏', 50, '2019-11-20', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870077', '1648881420550799361', NULL, 10, '2019-11-29', NULL, NULL, '2019-11-29', '已提交', 50, '2019-12-02', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870078', '1648881419514806274', NULL, 10, '2019-12-06', NULL, NULL, '2019-12-09', '已提交', 50, '2019-12-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-01-07', '同意结算', 2, '2020-02-23', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870079', '1648881421003784193', NULL, 10, '2019-12-11', NULL, NULL, '2019-12-13', '已提交     ', 50, '2019-12-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-02', '同意。', 2, '2021-01-29', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870080', '1648881419045044225', '由于工作量极低，按配合计量。', 59, '2020-04-14', NULL, NULL, '2020-04-16', '仪器完好归还', 50, '2020-04-16', '1.收到日期:2020年2月27日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：93.00分。', NULL, NULL, NULL, 10, '2020-05-07', '同意结算。', 2, '2020-08-02', '可以结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870081', '1648881419099570177', NULL, 61, '2020-04-16', NULL, NULL, '2020-04-16', '仪器完好归还', 50, '2020-04-16', '1.收到日期:2020年1月2日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：88.52分。', NULL, NULL, NULL, 10, '2021-02-26', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870082', '1648881419548360705', NULL, 10, '2019-12-05', '测区分散、交通不便、海拔高、雨季作业，地形图外业按困难地类、断面（含成果整理）按困难地区增加40%结算。分公司完成的金沙江断面按本项目委外单价计算、地形图外业按困难地区增加60%计算。因甲方对编绘、入库要求高，内业编绘、入库分别按复杂地类地形图数字化标准结算。', NULL, '2020-01-02', '已提交   ', 50, '2020-12-17', '1.收到日期:最终成果2020年12月8日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：地形图85.60分，断面92.80分。', NULL, NULL, NULL, 10, '2021-02-08', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870083', '1648881417971302402', '统计工作量均为最终完成并审批的实际工作量。', 101, '2020-12-25', '统计工作量均为最终完成并审批的实际工作量，目前项目已通过甲方验收。', NULL, '2021-01-05', '仪器完好归还', 50, '2021-01-05', '1.收到日期:2020年12月8日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：94.7分。', NULL, NULL, NULL, 10, '2021-04-29', '根据常规项目委托管理费用标准，作了校核更正。\n同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870084', '1648881418483007490', NULL, 10, '2020-12-28', '外业按项目预算、核定金额结算。内业按工作结算标准结算。', NULL, '2020-12-28', '设备已归还。', 50, '2020-12-28', '1.收到日期:2020年12月07日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：地形图：85.00分，DOM：89分，激光数据分类：88分。', NULL, NULL, NULL, 10, '2021-01-27', '外业按项目核定总体委托费用结算，内业按公司标准结算。\n同意结算。', 2, '2021-01-27', '同意上述意见，可以结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870085', '1648881418852106241', '1）测区平均高程2700米。\n2）因设计公路比现有公路平均高250米，每日爬山、下山需占用较多工作时间；\n3）因交通专业在现场是采用边设计边放样、边改线再放样的工作模式；\n4）按现有工作量结算，建议再增加5万元外业结算，平均单价约为350元。', 83, '2021-08-24', NULL, 17, '2022-09-22', '设备完好归还', 46, '2022-11-04', '1.成果按时提交用户，归档资料日期:2020年11月13日。\n2.工作量已核，符合用户要求。\n3.测绘质量满足用户要求和相应规范。质量评分：87.8分，属良级产品。', 13, '2022-12-29', '已阅。', 10, '2023-02-11', '外业有较多配合路桥专业工作，未扣减汽车台班费用。\n同意结算。', 2, '2023-07-09', '可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870086', '1648881418495590402', '按照公司《项目委托管理费用结算要求及流程（暂行）》20210311标准，填报了该项目结算清单。', 39, '2021-04-12', '已核。', NULL, '2021-04-27', '仪器完好归还', 50, '2021-07-14', '1.收到日期:2020年7月23日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：92.0分。', 39, '2021-12-30', NULL, 10, '2021-12-31', '同意结算。', 2, '2022-01-18', '财务部视资金情况尽快办理结算并支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870087', '1648881418466230273', '按照公司《项目委托管理费用结算要求及流程（暂行）》20210311标准，填报了该项目结算清单。由于该块面积实在是太小，按照标准工作量0.06km²，1:500单价1300元，只有78元费用，而相关工作全部都要作，故申请按照困难情况增加50%，即117元。', 39, '2021-04-13', '已核。', NULL, '2021-04-27', '仪器完好归还', 50, '2021-07-14', '1.收到日期:2020年5月8日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：91.0分。', 13, '2021-12-23', '已阅知。', 10, '2021-12-24', '同意结算。', 2, '2022-01-18', '同意按此金额结算，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870088', '1648881418541727745', NULL, 101, '2021-05-03', NULL, NULL, '2021-05-07', '仪器完好归还', 50, '2021-05-07', '1.收到日期:2020年06月02日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：85.7分。', NULL, NULL, NULL, 10, '2021-07-02', '同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870089', '1648881416973058050', NULL, 101, '2021-05-03', NULL, NULL, '2021-05-07', '仪器完好归还', 50, '2021-05-07', '1.收到日期:2021年02月23日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：81.8分。', NULL, NULL, NULL, 10, '2021-07-02', '同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870090', '1648881414603276289', '本项目结算费用224500元（按照合同总价25%）计费，为项目实施前商定结算金额。GNSS观测（B级网）为合同外新增项目。', 101, '2022-03-15', '已核。', 17, '2022-03-16', '设备仍在使用', 50, '2022-04-19', '1.收到日期:2021年12月8日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：92.79分。', 13, '2022-09-26', '已阅知。', 10, '2022-09-28', '同意参照2019年标准结算，不再报销其他项目开支。', 2, '2022-12-27', '同意按照上述意见和金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870091', '1648881418524950530', NULL, 39, '2021-02-04', NULL, NULL, '2021-02-08', '仪器完好归还', 50, '2021-02-08', '项目质量符合设计要求，质量为良。工作量确认正确。', 39, '2021-12-30', NULL, 10, '2021-12-31', '同意结算。', 2, '2022-01-18', '财务部视资金情况尽快办理结算并支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870092', '1648881418810163201', '本项目为单价合同项目，以每年完成的产值比例30%结算（附件1为领导批示依据）。2020年猴子岩监测项目共完成产值5395658.6元（分别为1月～4月产值1679365.97元，5月～12月产值3716292.63元）。目前甲方均已付款至公司。2020年资监测料已通过公司技术质量部审查，并已提交业主和归档。', 101, '2021-05-02', '本项目为单价合同项目，以每年完成的产值比例30%结算（附件1为领导批示依据）。2020年猴子岩监测项目共完成产值5395658.6元（分别为1月～4月产值1679365.97元，5月～12月产值3716292.63元）。目前甲方均已付款至公司。2020年资监测料已通过公司技术质量部审查，并已提交业主和归档。', NULL, '2021-05-07', '仪器完好归还', 50, '2021-05-07', '1.收到日期:周期性监测，按照业主要求时间。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量等级：良级。', NULL, NULL, NULL, 10, '2021-07-02', '同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870093', '1648881417115664385', NULL, 101, '2020-12-30', NULL, NULL, '2021-01-05', '仪器完好归还', 50, '2021-01-08', '1.收到日期:监测成果按照月度进度提交，符合甲方要求。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：按照监测平均分统计：89.65分。', NULL, NULL, NULL, 10, '2021-02-07', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870094', '1648881419619663874', NULL, 10, '2021-01-28', '本次为预结算。项目正式结算时减扣预结算费用。', NULL, '2021-01-28', '设备已归还。', 50, '2021-01-28', '项目过程质量修改后基本符合设计要求，工作量确认正确。', NULL, NULL, NULL, 10, '2021-02-01', '建议预结算。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870095', '1648881417333768193', NULL, 101, '2021-05-03', '结算费用已核。', NULL, '2021-05-07', '仪器完好归还', 50, '2021-05-08', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2021-07-02', '同意结算。', 2, '2022-01-18', '同意按此金额结算，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870096', '1648881418994712578', NULL, 101, '2021-05-03', NULL, NULL, '2021-05-07', '仪器完好归还', 50, '2021-05-07', '1.收到日期:监测成果按照月度进度提交，符合甲方要求。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量等级：优良。', NULL, NULL, NULL, 10, '2021-07-08', '同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870097', '1648881418965352449', '按合同及业主现场要求完成双江口水电站测量中心相关技术服务。新增双江口河道地形图测量已于2018年11月提交业主使用，新增金川水电站库区G248复建公路工程首级施工控制网建设已于2019年12月提交业主使用，相关合同经费均已支付至公司账户。', 120, '2021-05-06', '双江口测量中心已按合同完成业主要求的所有工作内容，以及新增变更项目，合同内及新增变更项目均已完成对业主的结算，款项均已到公司账户，现特申请项目结算。', NULL, '2021-05-07', '仪器完好归还', 50, '2021-05-07', '1.收到日期:测量中心工作，符合业主要求。\n2.工作量确认：测量中心工作，确认正确。\n3.质量评分：测量中心工作，符合要求。', NULL, NULL, NULL, 10, '2021-07-02', '同意结算。', 2, '2021-07-22', '同意上述意见，按照公司关于测量中心财务结算规定办理。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870098', '1648881417753198593', NULL, 61, '2021-11-26', '未参与，按预算结算，请领导核实。', 112, '2021-12-29', '仪器设备完好。', 50, '2022-01-04', '项目质量符合设计和规范要求，已归档。', 13, '2022-08-16', '已阅知。', 10, '2022-08-16', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870099', '1648881418881466369', NULL, 10, '2020-12-28', '本项目核准整体委托费用为104.56万元。按已完成DLG、DEM、DOM、断面测量、水文分析计算等内外业工作预算经费为62.41万元，本次按70%预算金额为43.687万元。', NULL, '2020-12-28', '设备已归还。', 50, '2020-12-28', '1.收到日期:2020年9月12日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：90.09分。', NULL, NULL, NULL, 10, '2020-12-29', '同意预结算。本次结算费用中24万用于支付水文分析计算，19.687万冲抵项目借款。', 2, '2020-12-29', '上述意见已阅，同意本次结算方案。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870100', '1648881418940186626', NULL, 10, '2021-01-28', '本结算费用应扣减以下绩效预发：\n向艳雄、何亚东、蒋剑虹（2020.1-12月）预发绩效。', NULL, '2021-01-28', '设备正常。', 50, '2021-01-28', '1.收到日期：服务工作，符合要求。\n2.工作量确认：服务工作，确认正确。\n3.质量评分：服务工作，符合要求。', NULL, NULL, NULL, 10, '2021-01-29', '同意结算。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870101', '1648881421460963330', NULL, 10, '2021-01-28', NULL, NULL, '2021-01-28', '设备正常。', 50, '2021-01-28', '1.收到日期：服务工作，符合要求。\n2.工作量确认：服务工作，确认正确。\n3.质量评分：服务工作，符合要求。', NULL, NULL, NULL, 10, '2021-01-29', '同意结算。', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870102', '1648881417296019457', NULL, 33, '2021-03-23', '已经核查，同意按此量结算。', NULL, '2021-03-31', '未领用设备。', 50, '2021-03-31', '1.收到日期:2020年12月11日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：85.57分。', NULL, NULL, NULL, 10, '2021-04-27', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870103', '1648881419481251841', NULL, 10, NULL, '外业增加高程系数10%。', NULL, '2019-11-19', '已提交', 50, '2019-11-25', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-06-01', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870104', '1648881416046116866', NULL, 33, '2021-04-23', '已核', NULL, '2021-04-27', '仪器完好归还', 50, '2021-07-14', '1.收到日期:2021年3月15日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：90.0分。', NULL, NULL, NULL, 10, '2021-08-25', '同意结算。', 2, '2022-01-18', '同意按此金额结算，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870105', '1648881418642391041', NULL, 32, '2021-03-09', NULL, NULL, '2021-03-31', '设备归还。', 50, '2021-03-31', '1.收到日期:2020年5月18日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.08分。', NULL, NULL, NULL, 10, '2021-06-24', '同意结算。', 2, '2021-06-25', '同意按此金额结算，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870106', '1648881417707061250', '按成果表及业主工程量签证单上报', 120, '2021-05-06', '双江口测量中心已于2021年1月按合同完成施控网复测工作，相关资料已归档并提交业主使用，与业主结算流程已办理完毕，现申请项目结算。', NULL, '2021-05-07', '仪器完好归还', 50, '2021-05-07', '1.收到日期:2020年12月29日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：91.9分。', NULL, NULL, NULL, 10, '2021-07-02', '按公司委托管理费用结算标准执行。\n同意结算。', 2, '2021-07-22', '同意上述意见，按照公司项目结算的财务规定办理。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870107', '1648881420903120898', '1、惠州工作量统计及成本核算见附件；\n2、项目参与人员进出场交通费用为报账；', 61, '2022-02-22', NULL, 112, '2022-02-28', '仪器设备完好。', 50, '2022-03-16', '1.收到日期:2020年8月25日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：控制89.08分，地形图评分：良级。', 13, '2022-12-29', '已阅核，外业按人天算是否合理需斟酌，租车须有租赁协议或相关票据等佐证材料。其他无异议。', 10, '2023-01-03', '鉴于城区作业困难程度及夏季高温作业，结合项目整体成本预算，\n建议按此结算', 2, '2023-02-10', '同意办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870108', '1648881419028267010', NULL, 61, '2020-04-16', NULL, NULL, '2020-04-16', '仪器完好归还', 50, '2020-04-16', '1.收到日期:2020年2月26日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.74分。', NULL, NULL, NULL, 10, '2021-02-24', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870109', '1648881419128930305', '工作量属实，已与项目管理部确认。', 59, '2020-04-14', '外业实际结算金额为40055元。\n由于涉及到2019年的发票，为减轻财务部工作的困难，请尽快办理为感。', NULL, '2020-04-16', '仪器完好归还', 50, '2020-04-16', '1.收到日期:2020年2月29日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.60分。', NULL, NULL, NULL, 10, '2020-05-07', '同意结算。', 2, '2020-08-02', '可以结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870110', '1648881419145707521', NULL, 61, '2020-04-16', '委外测图不扣质保金', NULL, '2020-04-16', '仪器完好归还', 50, '2020-04-16', '1.收到日期:2019年12月23日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：地形图 86.30分、DOM 92分、实景三维模型 95分。', NULL, NULL, NULL, 10, '2020-12-02', NULL, 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870111', '1648881421041532929', NULL, 10, '2019-12-06', NULL, NULL, '2019-12-09', '已提交', 50, '2019-12-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870112', '1648881420043288578', NULL, 10, '2019-12-06', NULL, NULL, '2019-12-09', '已提交', 50, '2019-12-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870113', '1648881419296702466', NULL, 10, '2019-12-06', '汽车台班费，在2019C23项目一并扣减。', NULL, '2019-12-09', '已提交', 50, '2019-12-18', '项目质量符合设计和规范要求，已归档。', NULL, NULL, NULL, 10, '2020-03-17', '同意结算', 2, '2021-02-01', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870114', '1648881421318356994', NULL, 10, '2020-12-07', NULL, NULL, '2020-12-07', '设备已归还。', 50, '2021-01-28', '质量符合作业计划要求，工作量确认正确。', NULL, NULL, NULL, 10, '2021-02-07', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870115', '1648881418680139778', '按配合测量困难地区400元/天计算，共计6天。', 83, '2021-08-24', '已核', NULL, '2021-08-25', '仪器完好归还', 50, '2021-09-06', '1.收到日期:2020年7月15日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：80.8分。', 83, '2022-08-22', NULL, 10, '2022-08-23', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870116', '1648881412753588225', NULL, 63, '2023-06-25', '该项目测图工作量小，测区零散，间隔距离较远，按人天进行结算。', 17, '2023-06-26', '设备已完好归还', 46, '2023-07-07', '1.资料归档日期:2023年6月26日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.3。', 13, '2023-07-10', '已阅，无异议。', 10, '2023-11-03', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870117', '1648881421427408898', '2019年项目结算费用690000.00元。', 122, '2021-10-18', NULL, NULL, '2021-10-19', '仪器完好归还', 50, '2021-11-24', '按照两河口水电站业主的要求，测量中心在本年度内完成了测量任务，相关测量资料已提交给业主，并归档。', 13, '2021-12-27', '已阅知，无异议。', 10, '2021-12-09', '同意结算。', 2, '2022-01-14', '同意，财务部视资金情况合理拨付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870118', '1648881417887416322', NULL, 32, '2021-12-13', NULL, 112, '2021-12-15', '仪器设备完好。', 50, '2021-12-22', '1.收到日期:2021年4月7日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：84.55分。', 13, '2022-02-21', '已阅核，第4项是否合理需斟酌，其他无异议。', 10, '2022-03-25', '此项目地形图测绘委外合同金额为101.1835万元（不含飞行费用）。\n公司内部承担工作同意按此结算。\n同意结算。', 2, '2022-12-27', '同意按此金额结算，项目承担部门须提供真实分配表，并补充未扣台班费的原因。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870119', '1648881418441064449', '测区高程2700米。', 83, '2021-08-24', '已核', NULL, '2021-08-25', '仪器完好归还', 50, '2021-09-06', '1.收到日期:2020年10月20日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.73分。', 13, '2022-09-26', '已阅。', 10, '2022-09-27', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870120', '1648881415492468738', '本项目上报工作量均为实际工作量。项目路途遥远，交通状况极差，项目安全风险较为突出，坝址位置位于无人区，海拔在3500左右。', 101, '2021-11-13', '已核', NULL, '2021-11-15', '仪器完好归还', 50, '2021-11-23', '1.收到日期:2021年8月18日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：96.35分。', NULL, NULL, NULL, 10, '2022-02-25', '鉴于测区交图、气候、海拔等条件，同意按复杂地类结算。\n根据技术质量部质检意见，扣除技术服务内容结算金额的10%。\n同意结算。', 2, '2022-12-27', '因质量原因，结算费用被扣除10%。但是，质量评分为“96.35”，逻辑关系混乱，请技术质量部补充说明。可以结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870121', '1648881416260026369', '按照实际工作量填报。', 101, '2021-11-13', '已核', NULL, '2021-11-15', '仪器完好归还', 50, '2021-11-23', '1.收到日期:2021年11月10日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.45分。', 13, '2021-12-17', '已阅知，无异议。', 10, '2021-12-17', '同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870122', '1648881418835329026', NULL, 61, '2021-11-26', NULL, 112, '2021-11-29', '仪器设备完好。', 50, '2021-12-06', '1.收到日期:2020年10月14日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：83.45分。', 13, '2022-08-22', '已阅知。', 10, '2022-09-05', '同意结算。', 2, '2022-12-27', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870123', '1648881416062894082', NULL, 101, '2021-08-14', '已核', NULL, '2021-08-14', '仪器完好归还', 50, '2021-09-08', '满足甲方要求。', NULL, NULL, NULL, 10, '2021-09-16', '同意结算。', 2, '2022-01-18', '同意按此金额结算，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870124', '1648881418822746114', NULL, 61, '2021-11-26', '已核', 112, '2021-11-29', '仪器设备完好。', 50, '2021-12-01', '1.收到日期:2020年10月15日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：85.50分。', 13, '2021-12-23', '已阅知，无异议。', 10, '2021-12-24', '同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870125', '1648881418793385986', NULL, 61, '2021-11-26', NULL, 112, '2021-11-29', '仪器设备完好。', 50, '2022-03-16', '配合工作符合实际情况。', 13, '2022-09-26', '已阅核，无异议。', 10, '2022-09-28', '同意结算。', 2, '2022-12-25', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870126', '1648881418747248642', NULL, 61, '2021-11-26', '已核。', 112, '2021-11-29', '仪器设备完好。', 50, '2021-12-01', '1.收到日期:2020年4月16日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：89.08分。', 13, '2022-08-22', '已阅知。', 10, '2022-08-23', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870127', '1648881418575282177', NULL, 61, '2021-11-26', '省外，按困难地类。已核。', 112, '2021-11-29', '仪器设备完好。', 50, '2021-12-01', '1.收到日期:2020年10月21日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：84.34分。', 13, '2021-12-23', '已阅知，无异议。', 10, '2021-12-24', '同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870128', '1648881418399121410', '本项目分两期完成，一同结算。2019年12月-2020年1月开展I期、2020年6月开展II期。', 61, '2000-01-01', NULL, 112, '2021-11-29', '仪器设备完好。', 50, '2023-01-13', '1.收到日期:2020年06月27日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.89分。', 13, '2023-02-19', '已阅，无异议。', 10, '2023-02-19', '同意结算。', 2, '2023-07-09', '可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870129', '1648881416226471938', NULL, 101, '2021-07-14', '已核。', NULL, '2021-08-14', '仪器完好归还', 50, '2021-08-17', '1.收到日期:2021年3月30日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：82.3分。', NULL, NULL, NULL, 10, '2021-08-25', '小面积测图，外业按困难地区标准结算。\n同意结算。', 2, '2022-01-18', '同意按此金额结算，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870130', '1648881416276803586', '面积太小，人工实测', 101, '2021-07-14', '已核。', NULL, '2021-08-14', '仪器完好归还', 50, '2021-08-17', '1.收到日期:2021年6月2日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：87.16分。', NULL, NULL, NULL, 10, '2021-10-28', '同意结算。', 2, '2022-01-18', '同意按此金额结算，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870131', '1648881418592059394', '1）测区平均高程为2900m；\n2）第5、6项工作未下任务通知单。', 83, '2021-07-15', '已核', NULL, '2021-08-25', '仪器完好归还', 50, '2021-09-06', '1.收到日期:2020年11月15日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：85.96分。', 83, '2022-08-22', '已阅。', 10, '2022-09-28', '同意结算。', 2, '2022-12-25', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870132', '1648881419565137921', NULL, 142, '2021-07-29', '已核。', NULL, '2021-08-24', '仪器完好归还', 50, '2021-08-24', '1.收到日期:2020年3月6日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：85.21分。', NULL, NULL, NULL, 10, '2021-09-15', '同意结算。', 2, '2021-09-27', '同意。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870133', '1648881418713694209', NULL, 61, '2021-11-26', '已核。', 112, '2021-11-29', '仪器设备完好。', 50, '2021-12-01', '1.收到日期:2020年10月13日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：85.48分。', 13, '2021-12-23', '已阅知。', 10, '2021-12-26', '同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870134', '1648881418411704322', '由于当时连续多个航测飞行任务，杨振与周建伟飞行完本测区后即前往其它测区。地形图内业初步成果出来后由其他同志进场开展调绘工作。', 83, '2021-07-13', '已核。', NULL, '2021-07-14', '仪器完好归还', 50, '2021-07-14', '1.收到日期:2020年7月1日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：85.76分。', 83, '2022-08-18', NULL, 10, '2022-08-19', '同意结算。', 2, '2022-12-27', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870135', '1648881416310358017', '本项目测区位于藏族地区，海拔2000m左右，测区植被茂密，作业环境恶劣。', 101, '2021-07-14', '已核。', NULL, '2021-08-14', '仪器完好归还', 50, '2021-08-17', '1.收到日期:2021年3月30日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：82.7分。', NULL, NULL, NULL, 10, '2021-10-28', '同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870136', '1648881416482324482', NULL, 32, '2021-03-09', NULL, NULL, '2021-03-31', '设备归还。', 50, '2021-04-19', '激光数据已提交甲方使用。', NULL, NULL, NULL, 10, '2021-04-27', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870137', '1648881416901754881', '工作量结算按相关要求进行', 32, '2021-03-09', '工作量咨询李仁贵后确定的6个人天。', NULL, '2021-03-31', '设备归还。', 50, '2021-04-19', '激光数据提交甲方使用。', NULL, NULL, NULL, 10, '2021-04-27', '同意结算。', 2, '2021-06-21', '同意上述意见，严格依按劳分配原则，合理分配。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870138', '1648881418386538498', NULL, 33, '2021-04-14', '由于本项目工序较复杂，采用人天进行计费。', NULL, '2021-04-27', '仪器完好归还', 50, '2021-04-30', '1.收到日期:2020年6月18日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.73分。', NULL, NULL, NULL, 10, '2021-07-08', '同意结算。', 2, '2022-01-18', '同意按此金额结算，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870139', '1648881417723838466', NULL, 33, '2021-04-14', '已核。', NULL, '2021-04-27', '仪器完好归还', 50, '2021-07-14', '1.收到日期:2021年3月15日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：地形图88.2分、DOM90分、三维地形面92分。', NULL, NULL, NULL, 10, '2021-09-15', '同意结算。', 2, '2022-01-18', '同意按此金额结算，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870140', '1648881418952769538', NULL, 10, '2021-04-28', NULL, NULL, '2021-04-30', '设备已归还。', 50, '2021-04-30', '成果满足业主对资料的要求，符合相关规范。', NULL, NULL, NULL, 10, '2021-07-08', '同意结算。', 2, '2021-10-18', '同意上述意见，可以结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870141', '1648881418424287233', '技术部质量评分85.19分。', 101, '2021-05-03', NULL, NULL, '2021-05-07', '仪器完好归还', 50, '2021-05-07', '1.收到日期:2020年09月16日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：85.19分。', NULL, NULL, NULL, 10, '2021-07-02', '同意结算。', 2, '2022-01-18', '同意按此金额结算，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870142', '1648881419162484738', '1）以下工作量为2020年3月新增工作量。该项目为进场西巴霞曲项目时顺路完成，故未报进出场人天。\n2）该项目2019年12月航测时大雪、现场等待产生费用、聘请民工除雪、现场吃住成本偏高等因素导致最终结算不太理想，请领导酌情予以考虑。', 83, '2021-07-13', '新增工作内容为12人天，现场开支1750元，平均单价为156元/天。建议按省外配合测量结算。', NULL, '2021-07-14', '仪器完好归还', 50, '2021-07-14', '1.收到日期:2019年12月20日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.30分。', 13, '2022-10-08', '已阅，可适当增加结算费用。', 10, '2022-10-08', '建议作业期间实际情况，增加现场误工结算。\n同意结算。', 2, '2022-10-11', '可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870143', '1648881415685406721', '三维地形面单价不清楚，请项目管理部核实单价', 33, '2021-08-16', '已核。', NULL, '2021-08-24', '仪器完好归还', 50, '2021-08-24', '1.收到日期:2021年8月10日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：89分。', NULL, NULL, NULL, 10, '2021-10-28', '同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870144', '1648881421209305089', NULL, 61, '2021-09-24', '已核', NULL, '2021-10-19', '仪器完好归还', 50, '2021-10-26', '1.收到日期:2019年9月10日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：85.5分。', 13, '2021-12-17', '已阅知，无异议。', 10, '2021-12-22', '同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870145', '1648881414078988290', '已按照甲方要求完成工作。', 121, '2022-01-20', NULL, 112, '2022-01-20', '全站仪及RTK仍在使用过程中。', 50, '2022-01-20', '按照金川水电站业主的要求，测量中心在本年度内完成了测量任务，相关测量资料已提交给业主，并归档。', 13, '2022-01-20', '已核，可按该金额办理结算。', 10, '2022-01-21', '同意结算。', 2, '2022-01-21', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870146', '1648881415979008002', NULL, 101, '2021-07-14', '已核。', NULL, '2021-08-14', '仪器完好归还', 50, '2021-11-30', '1.收到日期:2021年5月12日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：89.71分。', 13, '2021-12-17', '已核，是否按困难地类计算需斟酌，其他无异议。', 10, '2022-02-23', '根据土建项目材料、民工费用情况，对标准作了调整。\n情况属实，同意按此结算。', 2, '2022-12-27', '结算汇总表中的内容和金额均有误，修改后按照28065进行结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870147', '1648881418155851778', '该项目控制测量及地形图测绘均委外完成。第三项质量、进度管理及资料整编为杨振完成。', 83, '2021-07-14', '已阅', NULL, '2021-08-25', '仪器完好归还', 50, '2021-09-06', '1.收到日期:2020年12月8日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：84.87分。', NULL, NULL, NULL, 10, '2021-12-15', '同意结算。', 2, '2022-01-18', '同意按此金额结算，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870148', '1648881415647657985', '实际工作量118.66平方公里1：1000数据入库', 33, '2021-08-13', '已核', NULL, '2021-08-24', '仪器完好归还', 50, '2021-11-23', '按照甲方的要求，完成了入库测量任务，相关测量资料经检查后，于2021年6月已提交给甲方。', 13, '2021-12-17', '已核，无异议。', 10, '2022-02-21', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870149', '1648881419057627138', '现场总开支39845元（含机票、托运14839.00元），实际成本25006.00元，实际发生工天50人.天。\n建议按人天结算，请领导审核考虑。', 61, '2021-09-26', '测区高程3650，外业系数1.3。', NULL, '2021-10-19', '仪器完好归还', 50, '2021-10-26', '1.收到日期:2020年3月3日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：88分。', 13, '2022-08-22', '已阅知，合同编号为：CMC1：A-21002.', 10, '2022-09-05', '鉴于项目外业作业难度大，春节前冬季高原作业等困难程度，建议按外业600元/人天结算。\n建议按此结算。', 2, '2022-12-27', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870150', '1648881421276413954', NULL, 61, '2021-09-26', '已核。', NULL, '2021-10-19', '仪器完好归还', 50, '2021-10-26', '1.收到日期:2020年4月7日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：88.18分。', 13, '2021-12-17', '已核，修补测面积是否合理需斟酌。', 10, '2022-10-08', '补测系数已按实际情况调整。\n同意结算。', 2, '2022-12-24', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870151', '1648881418172628994', NULL, 83, '2021-07-14', '已核', NULL, '2021-08-25', '仪器完好归还', 50, '2021-09-06', '1.收到日期:2020年11月16日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.15分。', 83, '2022-05-26', NULL, 10, '2022-05-27', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870152', '1648881415429554178', NULL, 33, '2021-08-16', NULL, NULL, '2021-08-24', '仪器完好归还', 50, '2022-03-16', '1.收到日期:2022年2月14日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：84.58分。', 13, '2023-06-26', '已阅核，无异议。', 10, '2023-08-01', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870153', '1648881418256515073', NULL, 61, '2021-11-26', '库区1:2000地形图补测没有单独下任务，和本项目一起结算（表中7-9项）。', 112, '2021-12-16', '仪器设备完好。', 50, '2022-01-04', '测绘质量按照甲方的要求，并执行相应的规范。\n1.收到日期:2021年3月16日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：88.30分。', 20, '2023-02-27', '已核，水库区1:2000地形图修补测工作量略有增加。', 10, '2023-02-27', '同意结算。', 2, '2023-07-09', '可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870154', '1648881417925165058', NULL, 61, '2021-11-26', NULL, 112, '2021-12-16', '仪器设备完好。', 50, '2021-12-22', '1.收到日期:2020年11月28日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：83.5分。', 13, '2022-09-19', '已阅核，无异议。', 10, '2022-09-19', '同意结算。', 2, '2022-12-24', '同意按此金额结算，项目承担部门须提供真实分配表，财务部尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870155', '1648881417862250498', NULL, 61, '2021-11-26', NULL, 112, '2021-12-29', '仪器设备完好。', 50, '2022-01-11', '1.收到日期:2020年10月24日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：84分。', 13, '2022-08-22', '已阅知。', 10, '2022-08-23', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870156', '1648881417820307458', NULL, 61, '2021-11-26', NULL, 112, '2021-12-29', '仪器设备完好。', 50, '2022-01-04', '1.收到日期:2021年4月25日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：优。', 13, '2022-08-22', '已阅知。', 10, '2022-09-16', '同意结算。', 2, '2022-12-27', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870157', '1648881421402243074', NULL, 61, '2021-11-27', NULL, 112, '2021-11-29', '仪器设备完好。', 50, '2021-12-06', '1.收到日期:2019年11月13日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：地形图85.5分，断面、DEM、DOM优。', 13, '2023-02-19', '已阅核，无异议。', 10, '2023-02-20', '同意结算。', 2, '2023-07-09', '项目名称输入极不规范，可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870158', '1648881418034216962', '1.该项目参与人员有：杨振、邓锡全、程昊、杨永恒、杨晶；\n2.该项目界桩埋设完毕后，甲方调整了红线，造成270根界桩需要挪动。因部分界桩埋设地土质松软，故用水泥砂浆垫底后难以拔出、拔除后界桩受损，甲方要求重制了59根界桩。在项目现场及时告知了副总经理刘非、樊宽林；\n3.现场临时聘用的工人向树维因个人意外导致骨折，入院治疗及善后花费了20800元。该情况现场及时告知了副总经理刘非、专职安全员张明勇等，详见附件。', 83, '2021-12-06', NULL, 112, '2021-12-15', '仪器设备完好。', 50, '2022-03-16', '1.收到日期:2020年11月30日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：87.89分。', 13, '2022-08-29', '已阅知。', 10, '2022-09-05', '情况属实，同意结算。', 2, '2022-12-27', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870159', '1648881417509928962', NULL, 61, '2021-11-26', '测区平均高程3380（控制点），外业系数1.3', 112, '2021-12-24', '仪器设备完好。', 50, '2022-01-20', '1.收到日期:2021年8月20日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.26分。', 13, '2022-08-16', '已阅知。', 10, '2022-09-16', '外业增加高程系数0.15，增加冬季系数0.05。\n同意结算。', 2, '2022-12-27', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870160', '1648881417077915649', NULL, 32, '2021-12-14', NULL, 112, '2021-12-15', '仪器设备完好。', 50, '2021-12-28', '1.收到日期:2021年4月7日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：公司评分85.59分，\n4.省质监站检查：2021年6月8日，批合格。', 13, '2022-01-04', '已阅知。', 10, '2022-01-19', '本项目委外飞行26.0万、委托制图66.0万、委托质检12.0万，共计104.0万元。\n工作内容、结算已复核。同意按此结算。', 2, '2022-12-24', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870161', '1648881417807724546', NULL, 61, '2021-11-26', NULL, 112, '2021-12-29', '仪器设备完好。', 50, '2022-01-04', '1.收到日期:2021年2月23日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.61分。', 13, '2022-08-22', '已阅知，水面线复核可考虑一部分费用。', 10, '2022-09-16', '同意结算。', 2, '2022-12-27', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870162', '1648881417795141633', NULL, 61, '2021-11-26', NULL, 112, '2021-12-29', '仪器设备完好。', 50, '2022-01-11', '1.收到日期:2021年3月26日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：83.68分。', 13, '2022-08-22', '已阅知。', 10, '2022-08-23', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870163', '1648881417837084674', NULL, 61, '2021-11-26', NULL, 112, '2021-12-29', '仪器设备完好。', 50, '2022-01-11', '1.收到日期:2021年4月1日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：88.01分。', 13, '2022-09-26', '已阅。', 10, '2022-09-28', '同意结算。', 2, '2022-12-27', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870164', '1648881418340401153', NULL, 61, '2021-11-26', '测区平均海拔3700，外业结算单价增加30％。', 112, '2021-12-29', '仪器设备完好。', 50, '2022-01-04', '1.收到日期:2020年8月20日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：87.01分。', 13, '2022-09-20', '已阅，修测比例偏高，现场配合测量单价偏高。其他无异议。', 10, '2022-09-22', '现场等待纳金项目（后延期到年底）期间，按现场配合测量（无高原系数）；修测原地形图为2014年实测，现场变化大，按60%修测计。\n同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870165', '1648881418977935362', '按照甲方要求完成全年技术服务工作。', 121, '2021-12-17', NULL, 112, '2021-12-24', '仪器设备仍在使用中。', 50, '2022-01-11', '按照金川水电站业主的要求，测量中心在本年度内完成了测量任务，相关测量资料已提交给业主，并归档。', 13, '2022-01-20', '已核，该金额为谈定金额，可以办理结算。', 10, '2022-01-21', '同意结算。', 2, '2022-01-21', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870166', '1648881418558504961', '工作量按项目实际完成统计，项目结束后已将工作量报至业主。', 61, '2021-11-26', '委外飞行费用由贾春华代付。此结算项目由测绘工程中心代贾春华冲抵借款3万元。1500元为税款。', 112, '2021-12-29', '仪器设备完好。', 50, '2023-01-13', '1.收到日期:2020年07月29日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.49分。', 13, '2023-02-19', '已阅核，无异议。', 10, '2023-02-19', '土建、水准民工费已包含在结算内，不再单独结算民工费。\n同意结算。', 2, '2023-07-09', '可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870167', '1648881417736421378', NULL, 61, '2021-11-26', NULL, 112, '2021-12-29', '仪器设备完好。', 50, '2022-01-04', '1.收到日期:2021年7月27日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：84.60分。', 13, '2022-08-16', '已阅知。', 10, '2022-08-17', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870168', '1648881417438625793', NULL, 61, '2021-11-26', NULL, 112, '2021-12-24', '仪器设备完好。', 50, '2022-01-04', '1.收到日期:2021年2月25日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：84.68分。', 13, '2022-08-16', '已阅知。', 10, '2022-08-17', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870169', '1648881417367322626', NULL, 61, '2021-11-26', NULL, 112, '2021-12-24', '仪器设备完好。', 50, '2023-01-13', '1.收到日期:2020年12月13日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：90.84分。', 13, '2023-02-19', '已阅核，无异议。', 10, '2023-02-19', '同意结算。', 2, '2023-07-09', '结算费用合计与各分项累计有200元的差异，核实后可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870170', '1648881418453647362', NULL, 61, '2021-11-26', '已核算。', 112, '2021-11-29', '仪器设备完好。', 50, '2021-12-06', '1.收到日期:2020年6月29日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.14分。', 13, '2021-12-23', '已阅知。无异议。', 10, '2021-12-24', '同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870171', '1648881417564454914', '该项目位于云南省永善县境内，按省外地区计算。测区尚未施工，按困难地类计算。', 83, '2021-12-04', NULL, 112, '2021-12-15', '仪器设备完好。', 50, '2022-01-21', '1.收到日期:2021年8月12日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：90.79分。', 13, '2022-05-26', '已阅核，无异议。', 10, '2022-05-27', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870172', '1648881417472180225', NULL, 61, '2021-11-26', '测区平均高程3100，外业增加30％。', 112, '2021-12-29', '仪器设备完好。', 50, '2022-01-04', '1.收到日期:2021年3月21日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：88.90分。', 13, '2022-09-21', '已阅。', 10, '2022-09-22', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870173', '1648881418696916993', NULL, 61, '2021-11-26', '本项目内业全部委托云南分公司完成，项目管理部核实细节。已核实。', 112, '2021-11-29', '仪器设备完好。', 50, '2021-12-01', '1.收到日期:2020年10月19日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：85.06分。', 13, '2022-08-22', '已阅知。', 10, '2022-09-05', '同意结算。', 2, '2022-12-27', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870174', '1648881416293580802', '本项目测区分散，面积太小，多为支沟里面不通路地段，植被茂盛，时间耗费多且根本无工作量。并且第2次又要求进场补测，建议考虑增加系数。', 101, '2021-07-14', '已核。', NULL, '2021-08-14', '仪器完好归还', 50, '2021-08-17', '1.收到日期:2021年6月10日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：84.98分。', NULL, NULL, NULL, 10, '2021-10-28', '补测次数多、地点分数、作业难度较大，面积不足0.1km²的按0.1km²计算。\n同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870175', '1648881418776608769', NULL, 83, '2021-07-15', '已核。', NULL, '2021-08-25', '仪器完好归还', 50, '2021-09-06', '1.收到日期:2020年3月23日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.38分。', 83, '2022-08-22', NULL, 10, '2022-08-23', '同意结算。', 2, '2022-12-27', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870176', '1648881418327818241', '测区平均高程2700米。', 83, '2021-08-24', NULL, NULL, '2021-08-25', '仪器完好归还', 50, '2021-09-06', '1.收到日期:2020年10月19日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：83.69分。', 13, '2022-10-12', '已阅知。', 10, '2022-10-13', '同意结算。', 2, '2022-12-25', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870177', '1648881416679456770', '本年度共完成现场计量测绘工作363项，验收测量工作约43项，计量及技术管理资料审查工作约126项.完成了业主安排的零星测绘及现场技术服务，完成了对业主的合同结算申请及支付手续办理。', 120, '2021-12-28', '实际进场及合同生效结算时间为2020年12月1日，结算周期为13个月。', 16, '2022-03-21', NULL, 50, '2022-04-15', '按照巴拉水电站业主的要求，测量中心在本年度内完成了测量任务，相关测量资料已提交给业主，并归档。', 13, '2022-05-11', '已阅知，无异议。', 10, '2022-10-10', '同意结算。', 2, '2022-10-10', '可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870178', '1648881418227154945', NULL, 61, '2021-11-26', '测区平均高程4050（控制点统计），增加35％。', 112, '2021-12-24', '仪器设备完好归还。', 50, '2022-05-24', '1.收到日期:2020年11月20日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：地形图为91.6分；横断面图为94.80分；DEM为96.2分；DOM为93.1分。', 13, '2022-09-20', '已阅。', 10, '2022-09-20', '已对内外业测制断面按0.7计、必备药品采购按实际发生金额调整。\n同意结算。', 2, '2022-12-27', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870179', '1648881418864689154', NULL, 61, '2021-11-26', '除车辆公司提供外，项目总包干，上述金额为公司已核准金额。', 112, '2021-11-29', '仪器设备完好。', 50, '2021-12-06', '1.收到日期:2020年6月8日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：87.85分。', 13, '2021-12-17', '已阅知。', 10, '2021-12-17', '此结算是按照2020年3月公司核定、项目负责人认可的委托费用结算。\n同意结算。', 2, '2022-01-18', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870180', '1648881414078988290', '已按甲方要求提交资料。', 121, '2022-01-20', NULL, 112, '2022-01-20', '仪器设备仍在使用过程中。', 50, '2022-01-20', '按照金川水电站业主的要求，测量中心完成了变更测量任务，相关测量资料已提交给业主，并归档。', 13, '2022-01-20', '已核，可按此金额办理结算。', 10, '2022-01-21', '金川工程测量服务项目，2019-2021年变更结算。\n同意结算。', 2, '2022-01-21', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870181', '1648881415349862402', '九曲河确权长度36.3km，合同总价99643.50元。按70%委外。', 59, '2021-12-19', NULL, 112, '2021-12-24', '仪器设备完好。', 50, '2021-12-27', '资料已验收，并归档。', 13, '2021-12-30', '已阅知，无异议。', 10, '2021-12-31', '同意按核准的项目管理费用、经营奖励费用结算。', 2, '2022-01-18', '财务部视资金情况尽快办理结算并支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870182', '1648881416394244098', '按要求已完成工作。', 121, '2021-12-20', NULL, 112, '2021-12-24', '仪器设备仍在使用中。', 50, '2022-01-12', '1.收到日期:2021年3月6日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.27分。', 13, '2022-01-20', '已核，可以办理。', 10, '2022-01-21', '同意结算。', 2, '2022-01-21', '同意按此金额结算，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870183', '1648881418185211906', '该项目为前激光技术中心李仁贵负责项目，由地理信息中心承担内业生产及后续项目评审、培训业主等工作。故现在由我部门进行结算申报。', 39, '2021-12-19', NULL, 112, '2021-12-29', '仪器设备完好。', 50, '2022-01-20', '1.收到日期:2020年12月12日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：89.0分。', 13, '2022-02-10', '已阅知，无异议。', 10, '2022-02-21', '已校核并按标准修改。\n同意结算。', 2, '2022-03-14', '同意按此金额和方式进行结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870184', '1648881415395999745', '实际完成工作量跟子公司核对过提交工作量。', 32, '2022-01-25', NULL, 112, '2022-02-15', '仪器设备完好。', 50, '2022-06-09', '1.收到日期:2021年9月15日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：91.96分。', 13, '2022-10-08', '已阅知。', 10, '2023-02-11', '此结算只含激光技术中心、地理信息中心实际完成工作。\n三维模型制作，考虑面积较大、成果为粗模，按内部标准的0.6结算。\n同意结算。', 2, '2023-07-09', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870185', '1648881413986713601', '根据公司与业主签订的服务合同范围与内容完成现场技术服务。', 120, '2022-03-18', '为保证现场工作正常开展，经公司领导同意按上年度日常经费在年初办理本年度日常经费结算，确保现场生产费用能正常报账。', 17, '2022-03-18', '设备仍在使用', 50, '2022-04-15', '按照巴拉水电站业主的要求，测量中心在本年度内完成了测量任务，相关测量资料已提交给业主，并归档。', 13, '2022-05-11', '已阅知，无异议。', 10, '2022-10-10', '同意结算。', 2, '2022-10-10', '可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870186', '1648881413751832578', '恢复界桩6根，成果资料提交', 113, '2022-05-07', NULL, 17, '2022-05-07', '设备已完好归还', 50, '2022-05-24', '项目质量符合设计和规范要求，已归档。', 13, '2022-06-13', '已阅知。', 10, '2022-07-19', '情况属实。同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870187', '1648881416536850434', '此项目为外委项目，项目由我管理并整编资料。', 138, '2022-01-22', '此项目为外委项目，根据公司相关要求，办理项目管理与资料整编费用，结算金额为8000元。', 112, '2022-01-25', '未借用仪器设备。', 50, '2022-05-24', '1.收到日期:2021年2月6日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：84.42分。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870188', '1648881417006612482', NULL, 61, '2021-11-26', NULL, 112, '2021-12-24', '仪器设备完好。', 50, '2022-03-16', '1.收到日期:2021年8月9日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：88.1分。', 13, '2022-08-15', '已阅核，工作量是否准确请复核。本项目用户只认6平方公里，最后沟通认定9.5平方公里。', 10, '2022-08-17', '情况属实，同意结算。', 2, '2022-12-27', '台班费没有弄清楚，须核实，按照核实后的金额进行结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870189', '1648881418663362562', NULL, 61, '2021-11-26', NULL, 112, '2021-12-24', '仪器设备完好。', 50, '2022-01-20', '1.收到日期:2020年5月10日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：98.0分。', 13, '2022-09-20', '已阅。', 10, '2022-09-22', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870190', '1648881417224716290', NULL, 83, '2021-12-15', NULL, 112, '2021-12-15', '未使用仪器设备。', 50, '2022-03-16', '界桩编制符合设计和规范要求。', 13, '2022-05-26', '已阅核，无异议。', 10, '2022-05-27', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870191', '1648881418273292290', NULL, 33, '2021-12-18', NULL, 17, '2022-11-08', '设备已完好归还', 46, '2022-12-14', '1.归档日期:2021年12月10日。成果资料已提交用户。\n2.工作量已核，符合用户要求。\n3.测绘质量满足用户要求和相应规范。质量评分：90.8分。', 13, '2023-01-10', '已阅知。', 10, '2023-02-05', '同意按此结算。', 2, '2023-02-10', '同意办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870192', '1648881417539289089', NULL, 61, '2021-11-26', NULL, 112, '2021-12-24', '仪器设备完好。', 50, '2022-01-20', '1.收到日期:2021年1月8日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：83.20分,模型制作为优。', 13, '2022-09-26', '已阅。', 10, '2022-09-28', '同意结算。', 2, '2022-12-27', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870193', '1648881417262465026', NULL, 61, '2021-11-26', NULL, 112, '2021-12-24', '仪器设备完好。', 50, '2022-01-04', '1.收到日期:2021年3月4日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：87.18分。', 13, '2022-08-23', '已阅知。', 10, '2022-08-23', '同意结算。', 2, '2022-12-27', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870194', '1648881419376394242', '1）本项目自2018年10月接到生产任务成立项目部至2021年09月22日完成专家评审及项目验收，实际工期已经远超过计划工期。\n2）因成都市下发作业方案前后矛盾、甲方对成果要求不明确、和三调成果不断变更成果资料不断修改等原因，甲方要求工期紧、不允许停止工作等待最终三调成果和成都市最新规定，造成了工期和成本超出原计划。\n3）该项目额外增加工作量为外业306人天（6人*51天）、内业335人天（5人*67天），建议按照合同额追加10%（￥104600）的项目结算费用。', 83, '2022-08-19', '情况说明末页有领导批准意见。', 17, '2022-09-19', '设备完好归还', 46, '2022-11-02', '2021年10月27日政府已接收资料移交，2022年10月20日技术质量部资料归档。\n成果提交政府使用，通过专家评审验收。\n工作量已核。', 13, '2022-11-29', '已阅核，按领导批示意见执行。', 10, '2022-11-29', '情况属实，建议按审批意见增补结算。', 2, '2022-12-24', '同意按此金额结算，项目承担部门须提供真实分配表，财务部尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870195', '1648881419070210050', NULL, 83, '2022-09-26', NULL, 17, '2022-09-26', '设备已完好归还', 46, '2022-10-31', '成果已按时提交，归档资料于2022年3月10日提交。\n质量评分87分，良级产品。\n工作量已核。', 13, '2022-12-29', '已阅核，无异议。', 10, '2023-01-03', '同意结算。', 2, '2023-02-10', '同意办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870196', '1648881417849667586', '1）该项目由李磊负责项目现场管理，内外业核实由三家合作单位完成；\n2）因甲方要求现场负责人必须在大邑县常驻且设立固定办公场所，外业工作涉及在现场的食宿费用；\n3）该项目实际开支8870，只借款了4000元，超出开支由李磊垫付。', 83, '2022-09-20', NULL, 17, '2022-09-20', '设备完好归还', 46, '2022-09-20', '1.收到日期:2022年12月9日。\n2.工作量已核，满足项目要求。\n3.测绘质量满足用户要求和相应规范。质量评分：90分。\n4.因合同问题，该项目成果资料甲方未验收。', 13, '2022-09-20', '已核，外业工作结算单价超出结算标准，请分管领导定夺，其他无异议。', 10, '2022-09-20', '同意按公司标准结算。', NULL, '2022-09-20', NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870197', '1648881415026900993', NULL, 39, '2021-12-09', NULL, 112, '2021-12-09', '归还设备完好。可以流转至下一环节。', 50, '2021-12-10', '项目还未完成，提供了部分资料检查。冲项目现场开支费用。', 13, '2021-12-21', '已阅知。', 10, '2021-12-21', '此次结算为预结算，冲抵项目开支借款。', 2, '2021-12-22', '同意上述意见。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870198', '1648881416830451713', NULL, 122, '2021-12-10', '已核', 112, '2021-12-14', '项目未结束，相应仪器设备仍在使用中，运转良好', 50, '2021-12-15', '按照两河口水电站业主的要求，测量中心在本年度内完成了测量任务，相关测量资料已提交给业主，并归档。', 13, '2021-12-17', '已阅核，无异议。', 10, '2021-12-17', '同意结算。', 2, '2022-01-14', '同意，财务部视资金情况合理拨付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870199', '1648881418894049281', '本项目控制测量工作量、无人机飞行、进出场已报在水电规划项目中；', 83, '2022-08-18', NULL, 17, '2022-08-19', '设备已完好归还', 46, '2022-10-19', '资料归档时间为2020年10月10日；检查报告评定83.4分，为良级产品；工作量已核。', 13, '2022-12-29', '已阅核，无异议。', 10, '2023-01-03', '同意结算。', 2, '2023-02-10', '同意办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870200', '1648881417400877057', '该项目为拆迁和空闲地块项目，地块非常零散，共计206块，几乎遍布青白江区全域，困难系数比较大。', 39, '2021-12-16', NULL, 112, '2021-12-29', '仪器设备完好。', 50, '2022-03-16', '1.收到日期:2021年6月29日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：90.0分。', 13, '2022-03-22', '已阅知。', 10, '2022-05-31', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870201', '1648881418126491649', '老挝色拉龙一级水电站1:5000库区淹没放大地形图测绘61.9km&sup2;', 143, '2021-12-18', NULL, 17, '2023-02-08', '设备已完好归还', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870202', '1648881415991590913', NULL, 39, '2021-12-08', NULL, 112, '2022-01-04', '仪器设备完好。', 50, '2022-03-16', '1.收到日期:2021年8月16日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：地形图83.2分，DOM 90.0分。', 13, '2022-03-22', '已阅知。', 10, '2022-04-01', '同意按公司内部标准办理项目结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870203', '1648881419363811330', '项目存在非作业原因问题，思绪再三还是把项目结算提交了。', 39, '2021-12-18', NULL, NULL, NULL, NULL, 46, '2023-08-01', '1.资料归档日期:2022年9月16日。\n2.成果工作量符合任务要求。\n3.成果已提交用户使用，测绘质量满足相应规范。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870204', '1648881415362445314', '泸县2020年度国土变更调查项目于2021年2月签订合同并启动工作，成果于3月22日通过市级核查，4月1日通过省级核查，8月12日通过国家核查。通过核查的数据库共计362158个图斑，举证图斑16197个，其中耕地流入1000.04公顷，流出860.26公顷。项目合同总价1365000元。按50%比例委外。', 59, '2021-12-19', NULL, 112, '2021-12-24', '没有借用仪器设备。', 50, '2021-12-27', '资料通过国家级核查，交到公司已经归档。', 13, '2021-12-30', '已阅知，无异议。', 10, '2021-12-31', '同意按核准的项目管理、经营奖励费用结算。', 2, '2022-01-18', '财务部视资金情况尽快办理结算并支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870205', '1648881417904193537', NULL, 122, '2021-12-23', '飞行全部委外飞行，公司与委外单位另行结算，因此不申报飞行费用。', 112, '2021-12-29', '仪器设备完好。', 46, '2023-08-29', '1.资料归档日期:2023年8月8日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：90。', 13, '2023-09-13', '已阅核，无异议。', 10, '2024-02-26', '项目贯标资料提交时间、结算申请时间滞后较久。\n建议结算。', 2, '2024-03-19', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870206', '1648881414066405377', '共完成三等边角网31点，现场发生仪器租赁费用3000元，项目其他费为本次新增复测合同结算金额的2%，即325919*0.02=6518元。', 120, '2022-03-15', '外业工作按公司规定单价结算，现场发生仪器租赁费用3000元，项目其他费为本次新增复测合同结算金额的2%，即325919*0.02=6518元。', 17, '2022-03-16', '设备仍在使用', 50, '2022-05-10', '1.收到日期:2022年1月7日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：90.5分。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870207', '1648881415748321281', NULL, 101, '2021-11-13', '已核', NULL, '2021-11-15', '仪器完好归还', 50, '2021-11-23', '1.收到日期:2021年8月10日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：85.98分。', 13, '2021-12-17', '已阅知，承接合同暂未签订，可办理结算。', 10, '2022-02-21', '外业面积小，分散，按最小面积0.1平方公里计算。\n同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870208', '1648881414431309825', NULL, 33, '2022-12-26', NULL, 17, '2022-12-26', '仪器完好归还', 46, '2023-01-12', '1.资料归档日期:2022年1月26日。\n2.工作量已核，符合用户要求。\n3.成果已提交业主使用，测绘质量满足用户要求和相应规范。质量评分：86.9。', 13, '2023-02-19', '已核，无异议。', 10, '2023-02-19', '本项目外业由项目管理部(蒲帆)承担，内业由德方公司承担。\n同意结算。', 2, '2023-07-09', '同意办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870209', '1648881419607080962', NULL, 113, '2022-05-30', NULL, 17, '2022-05-30', '设备已完好归还', 50, '2022-05-30', '项目成果甲方已经验收，质量符合设计要求，已归档。', 13, '2022-06-13', '已阅知。', 11, '2022-06-28', '同意结算', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870210', '1648881418923409409', '本项目的控制测量工作量已报在水电规划项目中了，本项目不再申报。', 83, '2022-08-17', NULL, 17, '2022-08-19', '设备已完好归还', 46, '2022-10-19', '资料归档时间为2022年3月10日；\n质量检查评分为87.8，良级产品；\n工作量已核。', 13, '2022-12-29', '已阅核，1:10000 3D产品工作量与计划工作量出入较大，需再复核；控制工作量请按照合同约定完善相关归档资料。其他无异议。', 10, '2023-01-11', '经营发展部所提意见，项目负责人已与经营发展部沟通确认，并上传实际产品范围线。\n同意按此结算。', 2, '2023-02-10', '同意办理结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870211', '1648881418290069506', NULL, 83, '2022-08-18', NULL, 17, '2022-08-19', '设备已完好归还', 46, '2022-10-31', '1.成果按时提交用户，归档资料于2022年3月11日提交。\n2.工作量已核，符合用户要求。\n3.测绘质量满足用户要求和相应规范。质量评分：88.6分，良级产品。', 13, '2022-12-29', '已阅，无异议。', 10, '2023-01-11', '同意结算。', 2, '2023-02-10', '可以办理结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870212', '1648881418369761282', '1）第1~6项工作为测绘工程中心完成的工作量，第7~9项工作为委外公司完成的工作量；\n2）因开展本项目时甲方的要求高（按城市测量要求）、施测之时持续高温天气等，建议按1.35的系数进行外业工作结算。', 83, '2022-08-24', NULL, 17, '2022-08-30', '仪器完好归还', 46, '2023-01-11', '1.资料归档日期:2020年10月19日。\n2.工作量已核，符合用户要求。\n3.成果已提交业主使用，测绘质量满足用户要求和相应规范。质量评分：85.6。', 13, '2023-03-10', '已阅。', 10, '2023-04-24', '情况属实，同意结算。', 2, '2023-07-09', '未见汽车台班扣除项或有关说明，请附上作业过程记录，可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870213', '1648881415219838978', '按照合同要求已提交资料一套，通过专家组验收。', 49, '2023-01-12', '项目总提费用采用预算管理，本项目预算金额为205000.00元。', 17, '2023-01-12', '设备已完好归还', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870214', '1648881415815430146', '项目合同为总价合同，合同周期为44个月。目前合同已执行20个月，工作量完成近50％。', 138, '2023-01-12', '此项目为跨年项目，为便于成本发票入账，办理预结算。', 17, '2023-01-12', '此项目所借用的仪器设备仍在使用中，情况完好', 46, '2023-01-13', '资料暂未提交，根据该项目性质，质量和工作量均在作业现场由多方监控和审核。本次为中间结算，建议支付。', 13, '2023-02-03', '已阅核，可办理。', 11, '2023-02-03', '同意预结算，可以办理', 2, '2023-02-06', '可以办理预结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870215', '1648881417044361218', '此项目为外委项目，本人负责管理项目并整编贯标、成果资料。', 138, '2022-01-22', '此项目由我管理并整编相关资料，更具公司相关要求申请结算费用为：1、项目管理费用1500元；2、资料整编费用3天合计1080元。两项费用合计2580元。', 112, '2022-01-25', '未借用仪器设备。', 50, '2022-04-15', '1.收到日期:2021年4月14日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：84.92分。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870216', '1648881416184528898', '此项目为外委项目，由本人管理并对成果资料进行整编。', 138, '2022-01-22', '此项目为外委项目，根据公司相关要求结算管理费用以及资料整编费用为：7000元。', 112, '2022-01-25', '未借用仪器设备。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870217', '1648881415513440258', '0.6平方公里，内业航测成图，用以前空三资料。', 33, '2021-08-13', '已核', NULL, '2021-08-24', '仪器完好归还', 50, '2021-11-23', '1.收到日期:2021年9月9日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：88.30分。', 13, '2021-12-17', '已核，无异议。', 10, '2021-12-17', '同意结算。', 2, '2022-01-18', '同意按此金额结算，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870218', '1648881414066405377', '三等边角测量共计31点。', 120, '2022-03-15', '外业费用按公司标准结算，所用仪器TM50等为现场租用，费用合计3000元，项目其他费为本次新增复测合同结算金额的2%，即345471*0.02=6909元。', 17, '2022-03-16', '设备已完好归还', 50, '2022-04-19', '1.收到日期:2022年1月7日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：90.5分。', 13, '2022-07-05', '已阅核。', 10, '2022-07-15', '同意结算。', 2, '2022-11-01', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870219', '1648881413965742081', '根据公司与双江口公司合同约定完成现场技术服务。', 120, '2022-03-18', '为保证现场工作正常开展，经公司领导同意按上年度日常经费标准在年初办理本年度日常经费结算，确保现场生产费用能正常报账。', 17, '2022-03-18', '设备仍在使用', 50, '2022-05-10', '按照双江口水电站业主的要求，测量中心在本年度内完成测量任务，相关测量资料需提交给业主，并归档。', 13, '2022-06-15', '已阅核，无异议。', 10, '2022-07-18', '同意结算。', 2, '2022-11-01', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870220', '1648881417954525186', '此项项目为外委项目，由本人管理并参与部分内外业工作。', 138, '2022-01-12', '附件表中1-6项工作量，由于当时黄河上游河面已经冰封，外委单位无法施测，跟业主商量后期补测，该项六项工作量未重复结算给外委单位。', 112, '2022-01-18', '仪器设备完好。', 50, '2022-01-20', '按照甲方的要求，完成了本项目，相关测量资料已提交给业主，并归档。', 13, '2022-01-20', '已核，可按该金额办理结算。', 10, '2022-03-25', '结算单中1-9项按委外合同支付。10-16项为公司委托刘洋（公司未投入其他人力、设备）完成。17项为项目管理费。\n同意按审批的结算方式办理。', 2, '2022-10-10', '同意上述意见，可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870221', '1648881416864006146', '根据项目合同代表公司在现场全面完成了合同履约工作，完成了合同计量结算支付等合同管理工作。本年度共完成现场计量测绘工作372项，其中大坝标318项，土料标35项，其它标段19项。共完成验收测量工作约39项，其中大坝标24项、其它标段15项。本年共完成计量及技术管理资料审查工作约93项，完成墩标修建4点。', 120, '2021-12-28', NULL, 17, '2023-07-03', '测量中心的仪器设备为长期固定使用', 46, '2023-07-03', '成果质量和工作量满足业主要求。', 13, '2023-08-24', '已核，无异议。', 10, '2023-08-25', '同意按审批的金额结算。', 2, '2024-01-03', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870222', '1648881418881466369', '8条河流总包工作量和新增狮子口水库、上白水河、中白水河三条河流工作量见附件', 21, '2022-03-04', NULL, 112, '2022-03-14', '仪器设备完好。', 50, '2022-01-05', '1.收到日期:2021年4月15日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：优。', 13, '2022-03-24', '已阅核，无异议。', 10, '2022-03-25', '此项目原8条河流委托管理包干费用为108万元，2020年12月预结算43.6870元，本期结算差额64.3130万元；\n项目变更增加3条河流，水文分析与评审费用同意按审批的金额结算，常规内业按公司标准结算。\n同意结算。', 2, '2022-04-06', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870223', '1648881417874833410', '此项目为外委项目，由本人管理并整编资料。', 138, '2022-01-22', '此项目为外委项目，根据公司相关要求结算此项目的管理费以及资料整编费用：7000元。', 112, '2022-01-25', '未借用仪器设备。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870224', '1648881413605031938', '何亚东、向艳雄为该项目实施测量技术服务，费用结算标准为120000人*年', 112, '2022-02-28', '何亚东、向艳雄为该项目实施测量技术服务，费用结算标准为120000人*年', 112, '2022-02-28', '未借用仪器设备。', 50, '2022-02-28', '按照两河口移民代建工程的要求，测量服务在本年度内完成了测量任务，相关测量资料已提交给业主，并归档。', 13, '2022-03-01', '已阅知，无异议。请向艳雄再跟踪落实后续补充合同签订事宜。', 10, '2022-03-01', '同意参照往年每人10000元/月标准，2021年按1人1年包干结算。不再报销其他项目费用。\n同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870225', '1648881418764025857', '第1~18项为第一次杨晶负责完成工作内容、第19~24项为夏志军负责完成工作内容。', 83, '2021-07-13', '已核。', NULL, '2021-07-14', '仪器完好归还', 50, '2021-07-14', '1.收到日期:2020年4月20日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.5分。', 13, '2022-10-12', '已阅知。可办理。', 10, '2022-10-13', '同意结算。', 2, '2022-12-25', '结算金额略有8933.9元的差异，须核实，同意按照核算后的金额进行结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870226', '1648881419086987266', '1）该项目首批任务为1:500区域的地形图测绘任务，后期人员撤场后又新增了1:2000区域的地形图测绘任务；\n2）进出场只报了一次；\n3）第7项，委外采集的地物问题很多，因工期非常紧测绘工程中心进行了补测修测及正式图编制工作。', 83, '2022-09-26', NULL, 17, '2022-09-26', '设备已完好归还', 46, '2022-10-31', '成果按时提交，归档资料于2022年3月10日提交。\n质量评分86分，良级产品。\n工作量已核。', 13, '2022-12-29', '已阅核，无异议。', 10, '2023-01-03', '同意结算。', 2, '2023-02-10', '同意办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870227', '1648881412875223041', '按实际工作量统计', 32, '2022-09-20', NULL, 112, '2022-09-20', '仪器设备完好归还。', 46, '2022-09-20', '1.资料收到日期:2022年9月23日。\n2.工作量已核，符合用户要求。\n3.成果质量满足用户要求和相应规范。质量评分：85.3分。', 13, '2022-09-20', '已阅知。', 10, '2022-09-20', '同意按此结算。', 2, '2022-09-20', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870228', '1648881417769975809', '1.该项目外业参与人员为程昊、潘林海、陈建贤；\n2.现场利用SCCORS网络RTK按五等GNSS精度联测了39点，用于建立平面转换关系；\n3.测区平面海拔3100m。', 83, '2022-01-23', NULL, 112, '2022-01-25', '仪器设备完好。', 50, '2022-03-16', '1.收到日期:2020年11月23日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.07分。', 13, '2022-12-29', '已阅核，1:10000 3D产品工作量与计划工作量出入较大，请再确认。其他无异议。', 10, '2023-01-11', '经营发展部所提意见，项目负责人已与经营发展部沟通确认，并上传实际产品范围线。\n同意按此结算。', 2, '2023-02-10', '同意办理结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870229', '1648881413827330049', '按业主要求完成现场工作。', 121, '2022-07-13', '为了测量中心日常开支需求，按公司要求年初可以办理结算，现申请办理结算。', 112, '2022-08-03', '设备无损坏，仍在使用中。', 46, '2022-08-24', '按照金川水电站业主的要求，测量中心完成了相关测量任务，测量资料已提交给业主，并归档。', 13, '2022-08-30', '已阅知，无异议。', 10, '2022-09-05', '按实际工作进度支付。\n同意结算。', 2, '2022-10-11', '可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870230', '1648881413311430658', '按实际工作量上报。', 32, '2022-06-09', NULL, 112, '2022-09-22', '仪器设备完好。', 46, '2022-09-28', '1.收到日期:2022年5月7日。\n2.工作量确认：工作量符合甲方要求，已核实。\n3.该项目仅采集数据，成果满足用户要求。', 13, '2022-10-08', '已阅知。', 10, '2022-10-25', '同意按内部标准办理结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870231', '1648881418508173314', '工作量明细见附件“c23.png”', 51, '2022-01-25', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870232', '1648881418214572034', NULL, 138, '2023-01-03', NULL, 17, '2023-01-12', '设备已完好归还', 46, '2023-01-12', '1.资料归档日期:2022年3月10日。\n2.工作量已核，符合用户要求。\n3.成果已提交业主使用，测绘质量满足用户要求和相应规范。质量评分：84.8。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870233', '1648881414926237697', '1、因OA系统原因，结算明细采用附件形式上传，请领导审阅。\n2、本次结算，包含新增工作内容，不包含ML补签合同工作量；', 61, '2023-01-11', '西藏地区，测区平均高程3050（按控制点统计），外业增加 15%。', 17, '2023-02-23', '设备已完好归还', 46, '2023-02-27', '1.资料归档日期:2022年11月2日。\n2.工作量已核，符合用户要求。\n3.成果已提交业主使用，测绘质量满足用户要求和相应规范，通过了业主评审。质量评分：89。', 13, '2023-03-06', '已阅，可结算。请项目负责人将JW合同中ML工作项完成情况报给JW项目负责人，不得漏项。', 10, '2023-03-08', '部门申报表中第10、27项工作内容包含在JW库区内，不作结算，相应金额已做扣减（见附件20230307审核）。内部编号2021C39项目并入本项目一起结算。\n其余情况属实，同意结算。', 2, '2023-07-09', '可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870234', '1648881410790653953', '项目完成，正常结算。', 39, '2023-05-15', '外业工作由德方公司完成，由于德方单独结算，但现场开销由部门借款，故而需扣除。', 17, '2023-07-17', '设备已完好归还', 46, '2023-07-18', '1.资料归档日期:2023年5月30日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.7。', 13, '2023-09-05', '已阅知。', 10, '2024-01-17', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870235', '1648881420211060738', '项目时间跨度范围在2019年1月~2021年6月，历时2年半。', 50, '2021-12-21', NULL, 112, '2021-12-24', '仪器设备完好。', 50, '2021-12-27', '日期：2021年4月9日资料提交给二院和甲方。\n质量：地形图、断面、DEM、DOM、划界报告质量等级为优。\n工作量：按照甲方的要求完成相应工作。增补工作量已上报甲方复核。\n归档：成果资料公司已归档。', 15, '2022-01-14', '拟同意', 10, '2022-02-21', '本项目委外费用39.5万(已扣减委外质量费3万元），委托二院入库检查费3万元，共计委外42.5万元。\n情况属实，建议按此结算。', 2, '2022-12-27', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870236', '1648881416742371330', NULL, 33, '2023-06-25', NULL, 17, '2023-06-25', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2021年3月31日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.1。', 20, '2023-09-05', '已核，建议结算。', 10, '2023-11-01', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870237', '1648881415047872514', NULL, 33, '2023-06-25', NULL, 17, '2023-06-26', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2022年10月25日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：88.6。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870238', '1648881414905266178', NULL, 33, '2023-06-25', NULL, 17, '2023-06-25', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2022年5月5日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.1。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-11-01', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870239', '1648881413265293314', NULL, 33, '2023-06-26', NULL, 17, '2023-06-26', '设备已完好归还', 46, '2023-06-29', '1.资料归档日期:2023年3月22日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.8。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-12-04', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870240', '1648881412715839489', NULL, 33, '2023-06-26', NULL, 17, '2023-06-26', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2023年2月15日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.0。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-11-12', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870241', '1648881412296409090', NULL, 33, '2023-06-26', NULL, 17, '2023-06-26', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2023年3月31日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.8。', 13, '2023-09-07', '已核，无异议。', 10, '2023-11-12', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870242', '1648881413844107265', '本项目为单价合同项目，以每年完成的产值比例30%结算（附件1为领导批示依据）。2022年猴子岩监测项目与甲方共办理3次合同款支付，第1次结算金额为2944130.39元（2022年2月办理）、第2次结算金额为1794310.42元（2022年5月办理）、第3次结算金额为1534553.56元（2022年7月办理）。3次结算金额共计6,272,994.37元，合同款于2022年均已全部支付至公司。\n本项目于2022年12月31日已全部结束，成果资料已全部提交甲方归档，本项目已顺利通过合同完工竣工验收。竣工验收文件见附件5～附件7。', 101, '2023-06-26', '项目已顺利通过甲方验收，验收通过文件已上传，见附件5～附件7。', 17, '2023-06-26', '设备已完好归还', 46, '2023-06-30', '成果质量和工作量满足用户要求。', 13, '2023-09-07', '已核，无异议。', 10, '2023-11-12', '同意按批准的产值比例结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870243', '1648881413785387010', '与二滩合并结算，桐子林不单独结算', 102, '2023-06-26', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870244', '1648881413328207874', '本项目内部结算采用项目承包制形式结算，明细见附件。', 101, '2023-06-26', NULL, 17, '2023-06-27', '有1台TM50全站仪和4套徕卡棱镜仍在使用', 46, '2023-06-28', '1.资料归档日期:2023年5月17日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：89.6。', 13, '2023-07-12', '已阅。', 10, '2024-01-02', '已阅，同意按审批的方式结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870245', '1648881413344985090', '本项目内部结算采用项目承包制形式结算，明细见附件。', 101, '2023-06-26', '技术质量部综合评定90.90分。', 17, '2023-06-27', '设备已完好归还', 46, '2023-07-17', '1.资料归档日期:2023年7月10日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：90.9。', 13, '2023-08-31', '已核，无异议。', 10, '2024-01-02', '已阅，同意按审批的方式结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870246', '1648881418730471425', NULL, 61, '2021-11-26', '参照原分公司结算标准计算。', 112, '2021-12-24', '仪器设备完好。', 50, '2023-01-13', '1.收到日期:监测成果按照月度进度提交，符合甲方要求。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：82.5分。', 13, '2023-02-19', '已阅核，无异议。', 10, '2023-02-21', '同意结算。', 2, '2023-07-09', '可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870247', '1648881412795531265', NULL, 33, '2023-06-26', NULL, 17, '2023-06-26', '仪器设备已完好归还', 46, '2023-07-03', '1.资料归档日期:2022年12月8日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.0。', 13, '2023-09-13', '已阅核，无异议。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870248', '1648881418910826498', '1）按照最新的格式将西巴霞曲规划项目所完成的工作内容重新上报；\n2）西巴霞曲共有3个项目，所涉及的控制测量、无人机飞行、进出场等费用均报在本项目中，其它两个项目不再填报。', 83, '2022-08-17', NULL, 17, '2022-08-17', '设备已完好归还', 46, '2022-10-19', '资料归档时间为2022年3月10日；\n质量检查评分为93.6，优级产品；\n工作量已核。', 13, '2022-12-29', '已阅，无异议。', 10, '2023-01-03', '同意结算。', 2, '2023-02-10', '同意办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870249', '1648881418197794818', '本项目宏锦图文完成了0.369平方公里的地形图内业测绘工作，其余内业测绘工作由测绘工程中心承担。', 83, '2021-07-14', NULL, NULL, '2021-08-24', '仪器完好归还', 50, '2021-08-24', '1.收到日期:2020年11月10日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：87.13分。', 13, '2022-09-20', '已阅。', 10, '2022-09-22', '同意结算。', 2, '2022-12-27', '分项计算金额和结算总额不匹配，须核实。同意按照核实后的金额进行结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870250', '1648881418315235330', '1、本项目总共开支17295元，报账2976元（油费及电瓶等），实际成本14319元，合计工天49人.天；\n2、本次外业结算14619元，建议公司考虑按配合结算；', 61, '2021-11-26', NULL, 112, '2021-12-24', '仪器设备完好。', 50, '2022-03-16', '1.收到日期:2020年7月31日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：85.68分。', 13, '2022-09-20', '已阅知。', 10, '2022-09-20', '由于受测深仪测程限制，更换设备、支流测量难度大等情况，外业按实际人天参照配合测量结算。\n同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870251', '1648881413500174338', '按实际工作量统计', 32, '2022-05-10', NULL, 112, '2022-09-22', '仪器设备完好归还。', 46, '2022-09-28', '资料于2022-5-10接收并已归档。\n工作量已核。\n成果满足用户要求，质量得分85。', 13, '2022-11-07', '已阅知，无异议。', 10, '2022-11-29', '同意结算。', 2, '2022-12-24', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870252', '1648881420718571521', NULL, 61, '2021-09-25', '已借款支付曾涛（人工实测、粗编；1:500厂址，0.261km&sup2;）费用10000', NULL, '2021-10-19', '仪器完好归还', 50, '2021-12-07', '1.收到日期:2020年7月10日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：86.96分。', 13, '2023-03-06', '已核。', 10, '2023-03-07', '按一般地类标准，外业实测地形图工作增加0.1困难系数；测区距离成都较近，往返当天能开展外业工作，因此进出场按0.6结算（按人天结算的航飞工作除外）。\n同意结算。', 2, '2023-07-16', '生产部门上传的结算清单与实际结算出入较大，请核实后办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870253', '1648881412736811010', NULL, 32, '2022-08-19', NULL, 112, '2022-09-21', '仪器设备完好归还。', 46, '2022-11-02', '1.成果按时提交用户，资料归档日期为2022年7月20日。\n2.工作量已核，符合用户要求。\n3.测绘质量满足用户要求和相应规范。质量评分：87.8分，良级产品。', 13, '2022-12-06', '已阅核，无异议。', 11, '2022-12-29', '同意结算', 2, '2023-02-10', '同意结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870254', '1648881416578793474', NULL, 102, '2022-10-18', '根据2019年公司与项目部议定结算总价为1025800元，另外车辆使用费用（燃油、通行、维修等）、人员进出场交通费用公司据实报销，不再报销其他费用。', 17, '2022-10-18', '设备完好归还', 46, '2022-10-31', '成果等资料已于2022年5月5日提交业主归档，公司也已归档。\n质量满足业主要求，工作量满足合同要求。', 13, '2022-11-07', '已阅核，三滩大桥工作情况属实，其他无异议。', 10, '2023-02-11', '第四项以按公司内部标准调整。\n同意结算。', 2, '2023-07-09', '结算汇总中有“测绘工程中心”，须养成严谨工作的习惯。\n同意办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870255', '1648881413462425602', '按实际工作量统计', 32, '2022-10-25', NULL, 112, '2022-10-31', '仪器设备完好归还。', 46, '2022-10-31', '成果按时提交，归档资料于2022年5月13日提交。\n质量评分为89.7，良级产品。\n工作量已核。', 13, '2022-12-29', '已阅核，无异议。', 11, '2022-12-29', '同意结算', 2, '2023-02-10', '同意办理结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870256', '1648881411986030594', '按实际完成工作量上报', 32, '2022-12-27', NULL, 112, '2022-12-29', '仪器设备完好。', 46, '2022-12-29', '1.收到日期:2022年12月9日。\n2.工作量已核，满足用户要求。\n3.测绘质量满足用户要求和相应规范。质量评分：86.5分。', 13, '2023-01-03', '已核，无异议。', 11, '2023-01-03', '同意结算', 2, '2023-02-10', '同意办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870257', '1648881418139074562', NULL, 61, '2021-11-26', '委托外费用预算85000', 112, '2021-12-16', '仪器设备完好。', 50, '2021-12-22', '1.收到日期:2020年12月5日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：84.9分。', 13, '2022-08-23', '已阅知。', 10, '2022-08-23', '同意结算。', 2, '2022-12-27', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870258', '1648881416641708034', '本项目为单价合同项目，以每年完成的产值比例30%结算（附件1为领导批示依据）。2021年猴子岩监测项目共完成产值5632882.93元（分别为1月～5月产值2777667.60元，6月～12月产值2855215.33元）。目前甲方均已付款至公司。2021年资监测料已通过公司技术质量部审查，并已提交业主和归档。', 101, '2022-03-15', NULL, 17, '2022-04-11', '设备已完好归还', 50, '2022-10-11', '1.收到日期:监测成果按照月度进度提交，符合甲方要求。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：优良。', 13, '2022-12-28', '已阅核，无异议。', 10, '2023-02-05', '同意结算。', 2, '2023-02-10', '同意办理结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870259', '1648881412648730625', '地形图预计工作量0.15KM&sup2;，实际完成工作量0.11KM&sup2;。', 84, '2022-10-27', NULL, 17, '2022-10-27', '设备已完好归还', 46, '2022-10-31', '成果按时提交，归档资料于2022年9月23日提交。\n质量评分88.6，良级产品。\n工作量已核。', 20, '2022-12-06', '已核，无异议。', 10, '2022-12-21', '测区海拔3300m，外业增加0.15高程系数。\n同意结算。', 2, '2023-07-09', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870260', '1648881412493541377', '1、依据公司《项目委托管理费用结算要求及流程（暂行）》，按完成工作量统计。\n2、土建工作量相对较大，水准观测量多，项目结算总费用相对较低，望领导酌情考虑。', 102, '2023-06-20', NULL, 17, '2023-06-21', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2023年3月29日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：95.5。', 13, '2023-08-31', '已阅核，承接合同暂未签订，但与初始计划出入不大，建议结算。', 10, '2023-12-15', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870261', '1648881414796214274', NULL, 33, '2023-06-25', '单个内业项目结算不足400元时按400结算。', 16, '2023-06-25', '设备已完好归还', 46, '2023-07-03', '成果质量和工作量满足用户要求。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-07-31', '同意结算。', 2, '2024-04-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870262', '1648881412401266689', NULL, 33, '2023-06-27', NULL, 17, '2023-06-28', '设备已完好归还', 46, '2023-08-29', '1.资料归档日期:2023年8月16日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.1。', 13, '2023-09-14', '已阅核，无异议。', 10, '2023-11-12', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870263', '1648881416603959298', '1）该项目2021年参与人员为杨晶、潘林海、雷泽民、王国文，其中潘林海、雷泽民乘火车进场，现场工作13日；2022年参与人员为杨振、杨晶、张杰，现场工作5天；\n2）测区平均海拔为3700m，采用的系数为1.25；\n3）2022年西藏工程公司下达了横断面测量工作，未新登记项目，故一起办理结算。', 83, '2023-06-28', NULL, 17, '2023-06-28', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2021年9月7日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：89.9。', 13, '2023-08-29', '已核，无异议。', 10, '2023-08-30', '2021年春节前冬季作业。\n同意结算。', 2, '2024-04-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870264', '1648881415832207361', '1）该项目参与人员有杨振、程昊、李泳龙、朱倪强、罗友权，外业作业天数为12天。\n2）测区平均海拔4600m，外业测绘系数为1.5。', 83, '2023-06-28', NULL, 17, '2023-06-28', '设备已完好归还', 46, '2023-06-30', '1.资料归档日期:2023年3月22日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.4。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870265', '1648881416327135233', '1）该项目参与人员为潘林海、雷泽民，作业时间为2021年3月12日~3月23日。\n2）测区平均高程约3900米，由于新设计公路距离现有公路高差大、施测之时气温寒冷。很多区域积雪深厚，测量工作难度大，建议按1.5系数进行结算。', 83, '2023-06-28', NULL, 17, '2023-06-28', '设备已完好归还', 46, '2023-06-30', '配合工作满足用户要求。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-07-31', '情况属实，同意按1.5困难系数结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870266', '1648881411809869825', '按实际完成工作量上报', 32, '2023-04-17', NULL, 17, '2023-04-17', '设备已完好归还', 46, '2023-04-18', '1.资料归档日期:2023年2月23日。\n2.产品工作量已核，符合用户要求。\n3.成果已提交业主使用，测绘质量满足用户要求和相应规范。质量评分：85.4。', 13, '2023-04-20', '已核，无异议。', 10, '2023-04-24', '外业正值新冠疫情防控严格期间，冬季作业。根据实际情况，同意外业结算按1.2系数办理。\n同意结算。', 2, '2023-07-09', '项目名称与合同（或资料）名称不一致，须养成规范化工作习惯，可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870267', '1648881413567283202', '本项目金川测量中心投入1人，云南子公司投入3人，合计4人/天。', 121, '2023-06-26', NULL, 17, '2023-06-26', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2023年3月7日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-11-12', '同意结算。', 2, '2024-03-11', '同意按此结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870268', '1648881414729105410', NULL, 83, '2023-06-26', NULL, 17, '2023-06-27', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2022年7月20日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：81.7。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-07-31', '同意结算。', 2, '2024-04-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870269', '1648881415375028225', '1）该项目参与人员有杨振、潘林海、丁亮、陈建贤4人，现场测区平均海拔4200m；\n2）该项目内外业工作均由测绘工程中心承担。', 83, '2023-06-26', NULL, 17, '2023-06-27', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2023年2月23日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.1。', 13, '2023-07-10', '已阅。', 10, '2023-08-01', '新能源项目地形图按标准50%结算。鉴于测区实际困难程度，同意按困难地类增加高程系数。\n同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870270', '1648881411650486273', '本项目内部结算采用项目承包制形式结算，明细见附件。', 101, '2023-06-26', '技术质量部综合评定90.50分。', 17, '2023-06-27', '设备已完好归还', 46, '2023-07-17', '1.资料归档日期:2023年7月10日。\n2.成果工作量符合用户要求。\n3.测绘质量满足用户要求和相应规范。', 13, '2023-08-31', '已核，无异议。', 10, '2024-01-02', '已阅，同意按审批的方式结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870271', '1648881414473252866', NULL, 83, '2023-06-28', '按结算标准，地形图编辑已包含在第一项，不再另做结算。', 17, '2023-06-29', '设备已完好归还', 46, '2023-06-30', '1.资料归档日期:2022年3月24日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：82.3。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-08-01', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870272', '1648881415186284546', '1）本项目由张书伟、潘林海、周建伟3人参与，作业时间为2021年08月12日~8月15日。\n2）因本项目测绘工作量小，测区植被深厚，断面测量难度较大，建议按配合测量算。附件为按工作量结算的费用。', 83, '2023-06-29', NULL, 17, '2023-06-29', '设备已完好归还', 46, '2023-06-30', '1.资料归档日期:2022年3月24日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.1。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-07-31', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870273', '1648881413181407233', '按实际完成工作上报。\n外业工天说明：数据采集组王刚、万龙卿、熊艳华5.8-5.21，3人14天；外业组(调绘及控制工作)朱倪强5.8-5.24，共17天，李泳龙5.8-5.24，共17天，熊艳华5.22-5.24共3天。\n进出场说明：含梅县至台山转场。5.8朱倪强、李泳龙进场各1天，5.19转场各1天，5.25李泳龙出场1天，5.25-5.27朱倪强、熊艳华开车出场各3天，合计11天。', 32, '2023-06-27', '数据采集组与外业组共用一辆车，数据采集结束后采集组人员坐飞机赶回成都，外业组继续用车3天，建议不扣除台班费。', 17, '2023-06-27', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2022年10月14日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.5。', 13, '2023-08-31', '已核，无异议。', 10, '2023-12-04', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870274', '1648881414624247809', '本项目为工程监测中心与韶关分公司一并完成，贯标资料已提交技术质量部。', 101, '2023-06-26', NULL, 17, '2023-06-26', '设备已完好归还', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870275', '1648881412845862913', NULL, 33, '2023-06-26', NULL, 17, '2023-06-26', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2023年4月10日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.9。', 20, '2023-09-15', '已核，建议结算。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870276', '1648881415475691522', '按实际工作量结算，外业总工天99.5人天，现场总开销22590.9元。', 32, '2023-06-26', NULL, 17, NULL, NULL, 46, '2023-08-29', '1.资料归档日期:2021年12月28日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：89.6。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870277', '1648881414456475649', NULL, 33, '2023-06-26', NULL, 17, '2023-06-27', NULL, 46, '2023-06-28', '1.资料归档日期:2022年3月21日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：88.7。', 20, '2023-08-04', '已核，建议结算。', 10, '2023-09-14', '同意结算。', 2, '2024-04-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870278', '1648881412631953410', NULL, 113, '2023-06-27', NULL, 17, '2023-06-27', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2023年3月3日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.7。', 13, '2023-07-17', '无异议。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870279', '1648881410849374209', '按实际完成工作量上报', 32, '2023-06-28', NULL, 17, '2023-06-28', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2023年6月6日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.9。', 13, '2023-09-07', '已核，无异议。', 10, '2024-01-08', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870280', '1648881410694184962', '按实际完成工作量计算', 32, '2023-06-28', NULL, 17, '2023-07-02', '仪器设备已归还', 46, '2023-07-07', '1.资料归档日期:2023年7月3日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.9。', 13, '2023-08-24', '已核，无异议。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870281', '1648881413093326850', NULL, 113, '2023-06-28', NULL, 17, '2023-06-28', '设备已完好归还', 46, '2023-06-30', '1.资料归档日期:2022年6月1日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.1。', 13, '2023-08-31', '已核，无异议。', 10, '2023-11-03', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870282', '1648881414511001602', NULL, 33, '2023-06-25', NULL, 17, '2023-06-25', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2021年12月2日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：89.1。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-08-01', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870283', '1648881412090888194', '本项目内部结算采用项目承包制形式结算，明细见附件。', 101, '2023-06-26', '技术质量部综合评定90.60分。', 17, '2023-06-27', '设备已完好归还', 46, '2023-07-17', '1.资料归档日期:2023年7月10日。\n2.成果工作量已核，符合用户要求。\n3.测绘质量满足用户要求。', 13, '2023-08-31', '已核，无异议。', 10, '2024-01-02', '已阅，同意按审批的方式结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870284', '1648881412573233153', NULL, 33, '2023-06-27', NULL, 17, '2023-06-27', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2023年2月18日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.0。', 20, '2023-09-05', '已核，建议结算。', 10, '2023-11-12', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870285', '1648881414527778817', '本次申报结算为2023年4月～2023年5月期间进行土建埋设、观测、移交等工作，根据公司生产安排由工程监测中心执行本次生产任务，并对2021年未完成移交等情况本次一并整改完成移交。（最终成果以成都院名义向甲方提交完最终资料）', 101, '2023-06-27', NULL, 17, '2023-06-27', '设备已完好归还', 46, '2023-07-26', '1.资料归档日期:2021年12月20日。\n2.成果工作量已核，符合用户要求。\n3.成果质量满足用户要求。', 13, '2023-09-13', '已阅核，无异议。', 10, '2023-11-01', '本结算为2023年老木孔施控网项目二次完善测量费用。\n2021年第一次工作费用单独结算。\n建议结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870286', '1648881413927993346', NULL, 113, '2023-06-27', NULL, 17, '2023-06-27', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2022年1月9日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.9。', 13, '2023-09-07', '已核。', 11, '2023-09-08', '同意结算', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870287', '1648881414859128834', '1）该项目参与人员为杨晶、陈建贤，现场外业工作4天；\n2）因成都院对视频有特殊要求，需要进行剪辑、修改。内业工作天数为4天，按210元/天结算。', 83, '2023-06-27', NULL, 17, '2023-06-28', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2022年3月8日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：90.6。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-07-31', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870288', '1648881414372589569', '1）该项目参与人员3人，现场工作8日。', 83, '2023-06-28', NULL, 17, '2023-06-29', '设备已完好归还', 46, '2023-06-30', '1.资料归档日期:2023年4月7日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.5。', 20, '2023-09-15', '已核，建议结算。', 10, '2023-09-18', '同意结算。', 2, '2024-04-05', '同意结算，结算单信息显示：该项目还未与甲方签订合同，经营发展部须尽快追办。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870289', '1648881412443209730', '1）该项目参与人员有杨晶、张杰、刘轩庭、潘林海、廖双、邓锡全、陈建贤、何亚东、黄建春；\n2）该项目实施时，正值7~9月份，天气炎热，多次发布高温预警，民工更换频繁且费用较高。开展外业工作难度较高，测区高差大、山路崎岖、地形陡峭、建议水准测量按2.0系数结算；\n3）由于公路测量规范GNSS控制测量要求高，二等GNSS观测时间为4小时*4时段，卫星质量不佳，致使返测较多。建议按1.6系数进行结算；\n4）由于现场作业条件艰苦，按以上所述系数结算后外业人均结算单价为320/天。建议不扣除台班费。', 83, '2023-06-30', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2024-02-21', '1.资料归档日期:2022年11月16日。\n2.成果工作量符合用户要求。\n3.高程成果经与用户沟通及补测完成。总体测绘质量满足用户和相应规范要求。质量评分：86。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870290', '1648881411499491384', NULL, 84, '2023-07-01', NULL, 17, '2023-07-02', '仪器设备已归还', 46, '2023-07-03', '1.资料归档日期:2023年6月21日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：83.1。', 20, '2023-08-04', '已核，建议结算。', 10, '2024-01-12', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870291', '1648881411050700802', '测区海拔2300多米', 84, '2023-07-01', NULL, 17, '2023-07-05', '设备已完好归还', 46, '2023-07-07', '1.资料归档日期:2023年6月20日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.3。', 13, '2023-09-05', '已核，无异议。', 10, '2024-01-02', '同意结算。', 2, '2024-03-19', '可以按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870292', '1648881413361762305', '已完成泸县2021年度国土变更调查项目的所有工作，变更图斑总量171753个，举证图斑总量14345个。形成的成果已通过省级检查、部最终质量检查并确认。', 59, '2023-07-03', NULL, 17, '2023-07-03', '有仪器设备仍在泸县项目使用', 46, '2023-07-05', '成果通过验收，资料已归档。', 13, '2023-09-07', '已阅知。', 11, '2023-09-08', '同意结算', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870293', '1648881414712328193', NULL, 122, '2023-06-30', NULL, 17, '2023-06-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870294', '1648881411499491378', '内业利用已有项目资料成图，无外业工作。', 84, '2023-07-01', NULL, 17, '2023-07-02', NULL, 46, '2023-07-28', '1.资料归档日期:2023年7月26日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.4。', 20, '2023-09-14', '已核，建议结算。经营发展部会跟进合同签订', 10, '2024-01-12', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870295', '1648881411688235010', '本项目累计核查举证图斑万余个，提交省级核查7个批次，共提交省级核查图斑8101个，省级核查通过图斑5886个。', 59, '2023-07-03', '项目经理实际结算经费42380元。', 17, '2023-07-03', '泸县项目仍有在使用的仪器设备', 46, '2023-07-05', '资料已归档，质量、工作量满足合同及甲方要求。', 13, '2023-09-07', '已阅知。', 11, '2023-09-08', '同意结算', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870296', '1648881410534801409', '车辆使用2天含进出场，测区平均海拔700m', 84, '2023-07-04', NULL, 17, '2023-07-04', '仪器设备已归还', 46, '2023-07-07', '1.资料归档日期:2023年6月14日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.2。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-07-31', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870297', '1648881410572550145', '项目投入2人（夏志军、谭天宇），租车1天，测区平均海拔600m。成图面积0.02KM&sup2;，外业实测、内业编图。', 84, '2023-07-04', '内业单个项目按标准结算22.6元不足 400 元时，按 400 元结算。', 17, '2023-07-04', '设备已完好归还', 46, '2023-07-07', '1.资料归档日期:2023年6月20日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.5。', 20, '2023-07-20', '已阅核，建议结算。', 10, '2024-01-02', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870298', '1648881411105226753', '测区平均高程1200米，相对高差480米。数据采集、控制测量、断面测量、激光数据预处理均有激光技术中心完成。地形图成图由测绘工程中心完成，调绘由委外单位完成。', 84, '2023-07-06', NULL, 17, NULL, '设备已完好归还', 46, '2023-07-27', '1.资料归档日期:2023年6月28日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.8。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870299', '1648881414276120578', '1）该项目参与人员为丁亮、蒋剑虹、康科伟，现场工作时间为11月28日~11月29日；\n2）测区平均高程为3700m，外业测绘工作采用系数为1.25。', 83, '2023-06-29', NULL, 17, '2023-06-30', '设备已完好归还', 46, '2023-07-03', '1.资料归档日期:2023年6月20日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.7。', 20, '2023-08-04', '已核，建议结算。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870300', '1648881414259343361', '1）该项目参与人员为丁亮、蒋剑虹、康科伟，现场工作时间为11月16日~11月27日；\n2）测区平均高程为3900m，外业测绘工作采用系数为1.25。', 83, '2023-06-29', NULL, 17, '2023-06-30', '设备已完好归还  车辆使用正确', 46, '2023-07-03', '1.资料归档日期:2023年6月20日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.0。', 20, '2023-08-04', '已核，建议结算。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870301', '1648881414292897793', '1）该项目参与人员为丁亮、蒋剑虹、康科伟，现场工作时间为11月30日~12月05日；\n2）测区平均高程为3100m，外业测绘工作采用系数为1.15。', 83, '2023-06-29', NULL, 17, '2023-06-30', '设备已完好归还', 46, '2023-07-03', '1.资料归档日期:2023年6月20日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：88.8。', 20, '2023-08-04', '已核，建议结算。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870302', '1648881414192234498', NULL, 122, '2023-06-29', NULL, 17, '2023-06-30', '设备已完好归还', 46, '2023-07-03', '1.资料归档日期:2023年6月28日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.1。', 20, '2023-09-05', '已核，建议结算。', 10, '2023-11-01', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870303', '1648881414334840833', NULL, 113, '2023-06-30', NULL, 17, '2023-06-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870304', '1648881416117420033', NULL, 122, '2023-06-30', NULL, 17, '2023-06-30', '设备已完好归还', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870305', '1648881412594204674', '1）该项目由于甲方后期新增了测绘范围，共分为两次作业。第一次参与人员为：廖绍毅、张韦、黄建春、陈建贤。现场作业时间为2022年7月18日~7月29日（12天）。第二次参与人员为：夏志军、廖双、黄建春、周建伟。现场作业时间为2022年10月17日-11月3日（18天）\n2）测区平均高程为1500m，激光数据采集系数为1.2。', 83, '2023-07-08', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2023年2月28日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.6。', 13, '2023-09-12', '已阅核，无异议。', 10, '2023-11-09', '本项目地形、地类、地物较复杂，同意按一般项目标准结算。\n同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870306', '1648881413709889537', '该项目参与人员为杨为康、刘轩庭、熊艳华（司机），现场作业时间为2022年02月15日~2022年-02月-19日（5天）', 83, '2023-07-08', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2022年11月7日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.6。', 20, '2023-08-04', '已核，建议结算。费用在石棉县碳酸钙工业园测绘合同中已包含，工作内容未体现。', 10, '2023-11-09', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870307', '1648881413948964865', '该项目参与人员为丁亮、邓锡全、张波，现场作业时间为2022年1月5日~1月6日（2天）。', 83, '2023-06-29', NULL, 17, '2023-06-30', '设备已完好归还', 46, '2023-07-03', '1.资料归档日期:2023年2月9日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.0。', 20, '2023-08-04', '已核，建议结算。', 10, '2023-12-04', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870308', '1648881412682285058', '1）该项目第一期作业时间为2022年06月29日~7月10日（共12天）参与人员为杨振、张杰、杨晶、夏志斌；\n2）该项目第二期作业时间为2023年1月9日~1月14日（共6天）项目参与人员为张杰、杨晶；\n3）测区平均高程为4200m左右，外业测绘结算系数为1.35；\n4）1:5000地形图第一期测绘面积为164.89km²，生产了三维地形面; 第二期测绘面积为57.92km²，未生产三维地形面。合计222.81km²；', 83, '2023-06-29', NULL, 17, '2023-06-30', '设备已完好归还', 46, '2023-08-02', '1.资料归档日期:2023年7月26日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.4。', 20, '2023-09-05', '已核，建议结算。', 10, '2023-11-12', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870309', '1648881414003490818', NULL, 113, '2023-06-30', NULL, 17, '2023-06-30', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870310', '1648881412912971777', NULL, 113, '2023-06-30', NULL, 17, '2023-06-30', '设备已完好归还', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870311', '1648881416343912449', NULL, 122, '2023-06-30', NULL, 17, '2023-06-30', '设备已完好归还', 46, '2023-07-03', '1.资料归档日期:2021年8月27日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.0。', 20, '2023-07-20', '已核，建议结算。', 10, '2023-08-11', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870312', '1648881415567966210', '1）该项目参与人员为杨振、李泳龙、刘轩庭、周建伟，现场工作时间为12天；\n2）测区平均高程为2700m，按复杂地类计算。', 83, '2023-06-28', NULL, 17, '2023-06-28', '设备已完好归还', 46, '2023-06-30', '1.资料归档日期:2021年11月2日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.2。', 13, '2023-08-24', '已核，无异议。', 10, '2023-08-25', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870313', '1648881415001735169', '2021年8月16日~8月21日，张勇、杨晶、凌涛，3人*6天=18人天；', 83, '2023-06-29', NULL, 17, '2023-06-29', '设备已完好归还', 46, '2023-06-30', '1.成果工作量已核，符合用户要求。\n2.成果已提交用户使用，测绘质量满足用户要求和相应规范。', 20, '2023-07-14', '已核。', 10, '2023-07-31', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870314', '1648881412984274945', '该项目参与人员为杨振、廖绍毅、周建伟，现场工作时间为2022年03月7日~03月08日（共2天）', 83, '2023-06-29', NULL, 17, '2023-06-30', '设备已完好归还', 46, '2023-06-30', '1.资料归档日期:2022年10月25日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.9。', 20, '2023-09-14', '已核，建议结算。', 10, '2023-11-09', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870315', '1648881413131075586', '1）该项目外业参与人员为杨振、杨晶、张杰、夏志斌，杨晶于2022年3月11日~3月14日到现场查勘。测绘现场作业时间为2022年5月15日~6月29日（共计45天）其中2022年5月15日~5月29日为配合业主方准备相关资料、安全考试等；\n2）由于该项目特殊，在项目实施期间需要受远程视频监控与现场监督，每日早上需配合电站方应付相关检查，由于测区午后多起风，不利于无人船作业，工作时间极为有限。测区平均高程为3950m，外业测绘工作量结算系数为1.25。\n3）2022年5月15日~5月29日为配合业主方准备相关资料、安全考试等，按配合测量结算。', 83, '2023-06-30', NULL, 17, '2023-07-06', '设备已完好归还', 46, '2023-08-02', '1.资料归档日期:2023年7月26日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.3。', 20, '2023-09-05', '已核，建议结算。', 10, '2023-11-12', '情况属实，同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870316', '1648881414020268033', '2021年12月14日~12月18日，潘林海、蒋剑虹、康科伟，3人*5天=15人天。', 83, '2023-06-28', NULL, 17, '2023-06-28', '仪器设备已归还', 46, '2023-06-30', '成果已提交，配合工作满足用户需求。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-07-31', '按一般地类标准结算。\n同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870317', '1648881415949647874', '1）2021年4月19日~4月30日，张勇、雷泽民、康科伟，3人*12天=36人天；\n2）2021年5月5日~6月12日，张勇、雷泽民、康科伟，3人*39天=117人天；\n3）2021年6月27日~7月02日，张勇、刘轩庭、周建伟，3人*6天=18人天；', 83, '2023-06-29', NULL, 17, '2023-06-29', '设备已完好归还', 46, '2023-06-30', '有配合工作用户签字单，工作效果满足了用户需要。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-07-31', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870318', '1648881415412776962', '1）该项目测绘工程中心参与人员有杨晶、丁亮、陈敏、廖绍毅、赵程鸿、杨博涵、张家辉、刘轩庭；\n2）该项目现场作业时间为9月9日~9月29日。', 83, '2023-06-29', NULL, 17, '2023-06-30', '设备已完好归还', 46, '2024-02-20', '1.资料归档日期:2022年3月16日。\n2.成果工作量已核，符合用户要求。\n3.经整改后测绘质量满足用户和相应规范要求。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870319', '1648881414674579458', '该项目因天气原因分两次作业，第一次作业时间为10月8日~10月13日（6天），参与人员有丁亮，刘轩庭，康科伟。第二次作业时间为12月4日~12月5日（2天），参与人员有蒲帆，凌涛。', 83, '2023-06-30', NULL, 17, '2023-06-30', '设备已完好归还', 46, '2023-09-12', '1.资料归档日期:2023年8月25日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户和相应规范要求。质量评分：86.3。', 20, '2023-09-14', '已核，建议结算。', 10, '2024-01-26', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870320', '1648881414355812353', NULL, 113, '2023-06-30', NULL, 17, '2023-06-30', NULL, 46, '2023-07-07', '1.资料归档日期:2023年4月21日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量等级良。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870321', '1648881413529534465', NULL, 113, '2023-06-30', NULL, 17, '2023-06-30', '设备已完好归还', 46, '2023-07-03', '1.资料归档日期:2022年3月29日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.4。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870322', '1648881412153802753', '1）该项目参与人员为杨振、杨晶、张杰、廖双、廖绍毅、赵明焱。', 83, '2023-06-30', NULL, 17, '2023-07-06', '设备已完好归还', 46, '2023-07-07', '1.资料归档日期:2023年3月23日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：88.3。', 13, '2023-09-07', '已核，无异议。', 10, '2023-11-12', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870323', '1648881416721399809', NULL, 61, '2023-06-30', '常规外业未使用公司车辆。', 17, '2023-07-10', '设备已完好归还', 46, '2023-07-28', '1.资料归档日期:2023年7月27日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.0。', 20, '2023-09-19', '已核，注意单位标注，比如第2项单位应为人天。', 10, '2023-10-16', '同意结算。', 2, '2024-04-15', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870324', '1648881416759148545', NULL, 61, '2023-06-30', NULL, 17, '2023-07-02', '仪器设备已归还', 46, '2023-07-03', '1.资料归档日期:2021年5月31日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.9。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-07-31', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870325', '1648881410593521666', '测区位于甘孜州，测区平均海拔2800米，车辆使用2天。航飞及外调组共3人含驾驶员1人。', 84, '2023-07-01', NULL, 17, '2023-07-02', '仪器设备已归还', 46, '2023-07-27', '1.资料归档日期:2023年7月21日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.2。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870326', '1648881413512757249', '1）该项目参与人员为杨为康、黄建春、刘轩庭、周建伟（司机），现场作业时间为2022年03月19日~4月09日（22天）；\n2）测区平均高程为2600m、测区高差大、交通条件差、通视条件差，建议按复杂地类进行外业工作结算；\n3）基础设施分公司现场人员开支均由我中心承担，其在现场人数4~12人不等，期间共产生费用33143元（餐费8375、住宿费19668、民工费5100）', 83, '2023-07-08', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2022年9月20日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：88.3。', 20, '2023-08-04', '已核，建议结算。', 10, '2023-11-10', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870327', '1648881413911216130', '1）该项目参与人员有丁亮、邓锡全、康科伟、王刚、朱倪强、万龙卿、张波、唐浩、潘林海、程昊、肖建光、陈煊、唐子阳。', 83, '2023-07-06', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2024-02-20', '1.资料归档日期:2023年8月22日。\n2.成果工作量已核，符合项目要求。\n3.测绘质量满足用户和相应规范要求。质量评分：87.3。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870328', '1648881416465547266', NULL, 61, '2023-07-10', '本项目进出场及台班费已结算在2021C09项目中', 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2021年6月21日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.2。', 13, '2023-08-09', '已核，无异议。', 10, '2023-08-14', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870329', '1648881414175457281', '2021年11月和2022年4月，先后分两次先后进场开展现场工作，共计完成惠州市惠阳区237个点位的测绘工作，668块CAD平面图，总面积为574302.64m2。', 101, '2023-06-25', '成果资料已提交。', 17, '2023-06-26', '设备已完好归还', 46, '2023-08-16', '1.资料归档日期:2023年7月10日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.5。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870330', '1648881412220911618', '该项目参与人员为杨为康、黄建春、张杰、廖双、朱倪强、万龙卿、周建伟、熊艳华，现场作业时间为2022年9月26日~10月03日（3天）', 83, '2023-07-09', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-18', '1.资料归档日期:2023年7月13日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.8。', 20, '2023-08-04', '已核，建议结算。', 10, '2023-11-10', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870331', '1648881416411021314', NULL, 61, '2023-07-10', '本项目进出场及台班费已结算在2021C09项目中', 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2021年7月25日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.4。', 13, '2023-08-24', '已核，无异议。', 10, '2023-11-01', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870332', '1648881412774559745', '本项目于2022年7月份实施，2022年9月完成报告及其成果提交。', 101, '2023-06-26', '测区海拔2100m。', 17, '2023-06-27', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2022年9月7日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：91.9。', 13, '2023-07-10', '已阅，无异议。该工作不单签合同，费用已计入《天星坝水库输水工程技施阶段左干管地形图补测项目技术服务合同》中。', 10, '2023-11-09', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870333', '1648881416360689665', NULL, 61, '2023-07-10', '实际用车天数2天（不含进出场），不扣台班费。', 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2021年4月3日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.4。', 13, '2023-08-09', '已核，无异议。', 10, '2023-08-14', '同意结算。', 2, '2024-04-15', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870334', '1648881413030412290', NULL, 50, '2023-07-06', NULL, 17, '2023-07-06', NULL, 46, '2023-07-07', '1.资料归档日期:2022年8月30日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。', 20, '2023-07-20', '为什么工作量比合同少那么多呀？合同工作量144点，外业12点。而上报工作量为32点。请核实', 10, '2023-11-03', '坐标转换工作量结算不按计划量，因此少于计划工作量。已与经营发展部沟通说明。\n同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870335', '1648881416377466882', '此项目为公司外委项目，公司安排我管理、对接并完成成果报告汇工作。', 138, '2023-07-10', '此项目合同总价为：1798820元。根据公司相关规定项目管理费按合同价3%计算为：53964.6元。', 17, NULL, '设备已完好归还', 46, '2023-08-16', '1.资料归档日期:2022年3月10日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：91.3。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870336', '1648881411772121090', '1）该项目第一次参与人员有廖绍毅、李杨、肖建光、康科伟，现场作业时间为2022年12月15-12月18日；\n2）由于人员现场感染新冠且测区海拔较高，出于安全等考虑，全部撤回成都休整。第二次进场时间为2022年12月28日-2023年1月13日（17天），参与人员有廖绍毅、肖建光、蒋剑虹、周建伟；\n3）测区平均海拔为3800m，外业测绘工作结算系数为1.25。', 83, '2023-07-06', NULL, 17, '2023-07-07', '设备已完好归还', 46, '2023-07-07', '1.资料归档日期:2023年6月16日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.8。', 20, '2023-09-05', '已核，建议结算。', 10, '2023-12-04', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870337', '1648881413550505985', '1）该项目测绘工作由公司委外完成，廖绍毅完成安全质量管理及报告编写、视频拍摄任务等。\n2）本项目与紫霞界桩测绘项目同时进行，本项目不再报进出场及租车等费用。', 83, '2023-07-07', NULL, 17, '2023-07-07', NULL, 46, '2023-07-10', '1.资料归档日期:2022年10月27日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.4。', 20, '2023-08-04', '已核，建议结算。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870338', '1648881413244321794', '1）该项目参与人员有杨为康、黄建春、刘轩庭、王刚、万龙卿、熊艳华（司机），现场作业时间为2022年4月21日~05月07日。\n2）该项目后续新增了地类图测绘工作，由赵洪、雷佳川、凌涛完成。\n3）测区高差为1100m（700~1800m）激光外业采集系数为1.6。\n4）本项目现场车辆使用天数为9天。', 83, '2023-07-08', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2022年12月4日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：83.6。', 20, '2023-08-04', '已核，建议结算。', 10, '2023-11-09', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870339', '1648881412514512898', '1）该项目参与人员有刘非、杨为康、夏志斌、董旭鹏、凌涛、王刚、夏志军、熊艳华，作业时间为2022年07月21日~07月31日（10天）\n2）测区平均海拔为1300m，高差1029m（421m~1450m），激光采集系数为1.6；\n3）第一批任务的外业工作由测绘工程中心、激光技术中心完成，内业由航测遥感中心完成。第二批任务外业由德方公司完成，激光数据采集委外完成，内业由航测遥感中心完成。前后两期激光数据预处理工作均由激光技术中心完成。', 83, '2023-07-09', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2022年12月14日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.1。', 13, '2023-08-23', '已核，无异议。', 10, '2023-11-03', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870340', '1648881412346740737', '1）该项目参与人员为夏志军、赵明焱、蒋建虹、雷佳川、周建伟、刘非，现场工作时间为2022年08月17日~09月11日。\n2）该项目委外飞行，内业由航测遥感中心完成。', 83, '2023-07-09', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2023年4月4日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.1。', 20, '2023-08-04', '已核，建议结算。', 10, '2023-11-09', NULL, 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870341', '1648881413009440769', NULL, 50, '2023-07-06', NULL, 17, '2023-07-06', '设备已完好归还', 46, '2023-07-07', '1.资料归档日期:2022年8月30日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。', 20, '2023-07-20', '已核，建议结算。', 10, '2023-08-18', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870342', '1648881412237688834', '1）该项目参与人员为杨为康、张杰、廖双、黄建春、熊艳华、朱倪强、万龙卿、周建伟，现场作业时间为2022年09月26日~09月28日；\n2）在完成本项目飞行、调绘、控制、检查点等工作后，甲方通知任务取消，要求我方保留资料但不进行后续内业生产。', 83, '2023-07-09', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '按配合工作。', 20, '2023-08-04', '已核，建议结算。', 10, '2023-11-09', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870343', '1648881412254466049', '1）本项目参与人员有杨为康、张杰、廖双、黄建春、熊艳华、朱倪强、万龙卿、周建伟、王刚、廖绍毅、何涛、租车司机、刘媛媛、康科伟，主要作业时间为2022年09月26日~10月05日。\n2）现场车辆总使用天数为34天，4个车。\n3）因测区范围分散且林业局向导对项目情况不熟悉，导致部分测区重新踏勘确定测绘范围在现场配合甲方（成勘院及芦山林业局）踏勘共27人/天，其中9人/天踏勘范围需要测图，18人/天踏勘范围甲方取消任务。\n3）进出场：任务变更导致多次进出场，第一次进出场8人共16人/天，第二次进出场4人共8人/天，第三次（廖绍毅调绘）进出场4人共8人/天，第四次（飞行组）进出场3人共6人/天，第五次（飞行组）进出场3人共6人/天。\n4）无人机飞行：因测区地质灾害（滑坡及塌方）、修路、芦山雨雾天气多等导致飞行进度慢。飞行组总人天数为39天。', 83, '2023-07-09', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-18', '1.资料归档日期:2023年7月13日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.6。', 20, '2023-08-04', '已核，建议结算。', 10, '2023-11-03', '同意结算。', 2, '2024-04-05', '同意，暂时按此金额结算，经营发展部须尽快与甲方沟通合同签订及收款。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870344', '1648881413651169282', '1）该项目参与人员有杨为康、蒋建虹、赵明焱、凌涛（司机），现场作业时间为2022年3月2日~2022年3月8日（7天）；\n2）该项目航测成图工作均由委外公司完成；\n3）该项目由于涉及的工作量少，测区较分散等原因，现场开支了5274元，按工作量结算标准结算外业人均单价为51元/天，建议按照配合测量进行结算并不扣除台班费。', 83, '2023-07-08', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2022年11月7日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.0。', 20, '2023-08-04', '已核，建议结算。', 10, '2023-11-09', '建议按实际外业人天结算。\n建议结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870345', '1648881413147852802', '1）该项目参与人员为廖绍毅、黄建春，现场工作时间为28天。\n2）测区平均海拔为3700m，建议按1.25系数结算。', 83, '2023-07-07', NULL, 17, '2023-07-07', '设备已完好归还', 46, '2023-07-07', '有配合工作用户签字单，工作效果满足了用户需要。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-12-04', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870346', '1648881411965059074', '1）该项目参与人员有廖绍毅、何涛及公司聘请司机，现场作业时间为2022年11月16日~23日（共8日）\n2）激光数据采集由李旭、刘媛媛、陈建贤、刘晓斌（飞马公司）完成，共一天。', 83, '2023-07-07', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2023年4月19日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.4。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-11-10', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870347', '1648881413894438914', '1）该项目参与人员有夏志军、赵明焱、熊艳华、潘林海、刘轩庭。\n2）2022年03月03日，潘林海、刘轩庭、熊艳华到现场进行特征点测量。\n3）现场车辆使用天数为5天。', 83, '2023-07-08', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2022年6月9日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.8。', 13, '2023-07-26', '已核，完成工作量与合同工作量基本匹配。', 10, '2023-11-09', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870348', '1648881415895121921', '本项目委托成都林辉测绘服务有限公司完成外业工作、测绘工程中心负责委外管理、技术指导、质量检查及资料归档等工作。', 61, '2023-07-10', '技术质量部完成老鹰岩一级、二级界桩布设，本项目一并结算，老鹰岩二级不再结算界桩布设费用；', 17, '2023-07-10', '设备已完好归还', 46, '2023-07-12', '1.资料归档日期:2021年9月17日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：88.1。', 13, '2023-08-29', '已阅。', 10, '2023-11-01', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870349', '1648881413051383810', NULL, 83, '2023-07-08', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2022年6月10日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.2。', 13, '2023-09-07', '已核，无异议。', 10, '2023-11-10', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870350', '1648881415446331394', NULL, 61, '2023-07-10', NULL, 17, '2023-07-11', '设备已完好归还', 46, '2023-07-12', '1.资料归档日期:2021年8月12日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.4。', 13, '2023-08-25', '已核，打罗沟工作量与合同工作量出入较大，请项目负责人对于实际完成工作量与计划量出入大的项目及时报备。', 10, '2023-08-25', '1:500地形图按合同计划0.1km²结算（实际完成0.3km²，未报备）。\n同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870351', '1648881415668629506', NULL, 61, '2023-07-10', NULL, 17, '2023-07-11', '设备已完好归还', 46, '2023-07-12', '1.资料归档日期:2021年7月28日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.8。', 13, '2023-09-19', '已核，无异议。', 10, '2023-10-10', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870352', '1648881415265976322', NULL, 61, '2023-07-11', NULL, 17, '2023-07-11', '设备已完好归还\n车辆台班费正确', 46, '2023-07-12', '1.资料归档日期:2021年9月29日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.5。', 13, '2023-08-29', '已核，申报工作量与合同基本匹配。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870353', '1648881414976569346', '2022年7月项目变更：将地形图制作成地形地类图。本次工作量上报包括内外业地类图制作相关工作量。', 61, '2023-07-11', NULL, 17, '2023-07-11', '设备已完好归还', 46, '2023-07-12', '1.资料归档日期:2022年11月3日。\n2.成果工作量已核，符合用户要求。\n3.成果质量为合格，后经过整改。', 20, '2023-08-09', '已核，建议结算。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870354', '1648881414657802242', NULL, 61, '2023-07-11', NULL, 17, '2023-07-12', '设备已完好归还', 46, '2023-07-14', '1.资料归档日期:2021年11月10日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.2。', 20, '2023-09-14', '已核，建议结算。合同经营发展部正在跟进办理中。', 10, '2023-09-14', '同意结算。', 2, '2024-04-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870355', '1648881416499101698', '现场实际成本16431-5931(报账)=10500，外业结算15710，，台班费1260，可分配金额5210，外业现场开展工作共计22人天，均价179.5；\n建议按工天结算，建议单价800元/人天；', 61, '2023-06-30', '测区平均海拔3300m；增加高程系数以一般地类作结算基数。', 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2021年4月27日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.5。', 13, '2023-08-09', '已核，合同暂未签订，可先办理结算。', 10, '2023-08-14', '根据项目工作量小、分散，冬季西藏作业等实际情况，外业结算增加50%困难系数。\n同意结算。', 2, '2024-04-15', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870356', '1648881415551188994', NULL, 61, '2023-07-10', NULL, 17, '2023-07-11', '设备已完好归还', 46, '2023-07-28', '1.资料归档日期:2023年7月27日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.6。', 20, '2023-09-05', '已核，建议结算。', 10, '2023-09-28', '同意结算。', 2, '2024-04-15', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870357', '1648881414775242753', NULL, 61, '2023-07-11', '测区平均高程4150m，任务通知书上面明确外业系数1.5。', 17, '2023-07-12', '设备已完好归还', 46, '2023-07-14', '1.资料归档日期:2022年3月20日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.3。', 20, '2023-08-09', '已核，建议结算。', 10, '2023-09-28', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870358', '1648881414750076930', '本项目委外开展，公司廖绍毅现场指导、管理及检查。', 61, '2023-07-11', '水库正常蓄水位3723，外业增加 25%', 17, '2023-07-12', '设备已完好归还', 46, '2023-07-14', '1.资料归档日期:2022年5月30日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.5。', 13, '2023-08-23', '已核，无异议。', 10, '2023-09-28', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870359', '1648881415932870657', NULL, 61, '2023-07-10', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-12', '成果质量满足用户要求。', 13, '2023-08-09', '已核，无异议。', 10, '2023-08-14', '同意结算。', 2, '2024-04-15', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870360', '1648881415240810497', '外业参与人员3人，累计工天74人天，现场实际陈本14606元，实际结算34751，台班费-3960，质保金-2800，可分配金额27991\n平均单价180，建议按人天计算，建议单价520元/人.天；', 61, '2023-07-11', '测区平均海拔3500米', 17, '2023-07-11', '设备已完好归还', 46, '2023-07-12', '1.资料归档日期:2021年12月1日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.3。', 13, '2023-08-22', '已核，未超承接合同计划工作量。', 10, '2023-08-23', '本项目配合路桥专业工作较多，工作量小、分散，不扣汽车台班费。\n同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870361', '1648881412002807809', NULL, 61, '2023-07-16', '测区平均高程2485，外业系数增加10％；', 17, '2023-07-17', '设备已完好归还', 46, '2023-07-18', '1.资料归档日期:2023年3月21日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.9。', 13, '2023-08-25', '已核，无异议。', 10, '2023-11-08', '同意结算。', 2, '2024-03-20', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870362', '1648881412074110977', '该项目参与人员有廖绍毅、赵明焱、李泳龙，现场作业时间为2022年10月27日~11月4日（9天）；', 83, '2023-07-08', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2023年3月20日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.3。', 20, '2023-09-05', '已核，建议结算。', 10, '2023-11-09', '同意结算。', 2, '2024-03-20', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870363', '1648881411885367297', '1）该项目分两次进场，参与人员第一次为杨为康、凌涛。第二次为杨为康、刘轩庭、董旭鹏、赵明焱、陈建贤；\n2）现场车辆使用天数为15天；\n3）该项目总面积为12.988平方公里。由于该项目收集2020年的航片资料，后期变化较大，外业进行了全野外实测1.5平方公里。', 83, '2023-07-09', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2023年4月6日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.1。', 20, '2023-07-14', '已核，建议结算。', 10, '2023-12-04', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870364', '1648881416427798530', NULL, 61, '2023-07-09', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2021年5月29日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.3。', 20, '2023-09-14', '已核，建议结算。', 10, '2023-11-01', '春节期间全勤外业，建议按2000元/人补贴；\n因地形图质量问题，扣除结算金额（不含卫片采购、租船、台班费）的10%。\n建议结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870365', '1648881412459986946', '1、依据公司《项目委托管理费用结算要求及流程（暂行）》，按完成工作量统计。\n2、土建工作量相对较大，水准观测量多，项目结算总费用相对较低，望领导酌情考虑。', 102, '2023-06-20', NULL, 17, '2023-06-21', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2023年3月29日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：95.1。', 13, '2023-08-31', '已核，承接合同暂未签订，但与计划工作量基本匹配，建议按此工作量结算。', 10, '2023-12-15', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870366', '1648881415286947841', '本项目交通条件困难，外业效率低，项目现场开支6081，报账1195，实际开支4886，累计27人天，结算9833.2，扣除台班900及开支，实际可分配金额4047，平均单价149.9人天。建议公司按人天结算，建议单价500元/人.天；', 61, '2023-07-11', '测区平均海拔2450', 17, '2023-07-11', '该项目张书伟2021年09月01日借用的平板电脑R22M2006SOX至今尚未归还', 46, '2023-07-12', '1.资料归档日期:2022年2月22日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：82.3。', 20, '2023-09-14', '已核，建议结算。', 10, '2023-09-28', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870367', '1648881416792702977', '1）该项目参与人员有程昊、杨振、丁亮、邓锡全4人，现场工作12天；\n2）测区平均海拔为2800m，外业测绘部分采用的系数为1.1；\n3）所有区域低处均进行了外业无人机飞行，内业修测成图。建议外业系数按1.2结算，内业系数建议按1.1结算。', 83, '2023-06-26', NULL, 17, '2023-06-28', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2021年8月5日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.5。', 20, '2023-09-14', '建议结算。', 10, '2024-01-26', '同意结算。', 2, '2024-03-19', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870368', '1648881416444575746', NULL, 61, '2023-07-10', '测区位于西藏，外业按复杂地类结算。', 17, '2023-07-10', '设备已完好归还', 46, '2023-07-12', '1.资料归档日期:2021年7月8日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.0。', 13, '2023-08-24', '已核，无异议。', 10, '2023-11-01', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870369', '1648881415861567490', '委外单位人员险现场参加工作，郑鹏现场管理、参与外业工作，同时完成质量检查及资料归档工作。', 61, '2023-07-10', '1、本次计算不包含委外费用；\n2、委外单位现场参与人员4人，工作3天。', 17, '2023-07-10', '设备已完好归还', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870370', '1648881415064649729', '因业主方选址问题，项目暂停，未进行后续产品制作；', 61, '2023-07-11', NULL, 17, '2023-07-11', '设备已完好归还', 46, '2023-07-18', '项目暂停，仅完成前期工作。', 20, '2023-08-09', '已核，建议结算。', 10, '2023-11-01', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870371', '1648881414880100353', NULL, 61, '2023-07-11', NULL, 17, '2023-07-11', '设备已完好归还', 46, '2023-07-12', '1.资料归档日期:2021年12月13日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：91。', 13, '2023-09-19', '已核，无异议。', 10, '2023-09-28', '同意结算。', 2, '2024-04-15', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870372', '1648881411826647041', NULL, 33, '2023-06-26', NULL, 17, '2023-06-26', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2023年3月27日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.8。', 13, '2023-09-07', '已核，平面控制实际完成与计划有出入，以后项目请及时报备完成情况。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870373', '1648881415727349761', NULL, 61, '2023-07-10', NULL, 17, '2023-07-11', '设备已完好归还', 46, '2023-07-12', '1.资料归档日期:2021年8月30日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.4。', 13, '2023-08-09', '已核，无异议。', 10, '2023-08-14', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870374', '1648881415630880769', NULL, 61, '2023-07-10', NULL, 17, '2023-07-11', '设备已完好归还', 46, '2023-07-28', '1.资料归档日期:2023年7月27日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.3。', 13, '2023-08-24', '已核，无异议。', 10, '2023-08-25', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870375', '1648881415458914305', NULL, 61, '2023-07-10', NULL, 17, '2023-07-11', '设备已完好归还', 46, '2023-07-12', '1.资料归档日期:2021年8月26日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.8。', 20, '2023-08-09', '已核，建议结算。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870376', '1648881416520073217', NULL, 61, '2023-07-12', NULL, 17, '2023-07-12', '设备已完好归还', 46, '2023-07-14', '1.资料归档日期:2021年7月7日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：91.5。', 13, '2023-08-09', '已阅。', 10, '2023-09-28', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870377', '1648881414527778817', '1）本项目参与人员有潘林海、丁亮、邓锡全、蒋剑虹、周强、王国文、何涛、廖友福、何亚东。\n2）项目作业时间为2021年10月17日~11月19日，共34天。', 83, '2023-06-29', NULL, 17, '2023-06-30', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2021年12月20日。\n2.成果工作量已核，符合用户要求。\n3.成果质量总体满足用户要求；仅控制点土建有缺陷，后经过了整改。定义为一般质量事故，建议对土建的结算以一定的处罚。', 20, '2024-01-23', '建议结算。', 10, '2024-01-26', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870378', '1648881414313869314', '工作量及系数按实际情况上报，实际成本10525，平均成本292.4，现场工作36人天，外业结算金额24404.1，可分配平均单价302；\n建议按人天计算，建议结算单价700元/人.天。', 61, '2023-07-11', '测区平均海拔3600，测区分散，单块面积小，消费高，请领导酌情考虑增加系数或者按人天结算。', 17, '2023-07-12', '设备已完好归还', 46, '2023-07-14', '1.资料归档日期:2022年3月23日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.8。', 13, '2023-08-09', '已核，无异议。', 10, '2023-08-29', '同意按公司标准结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870379', '1648881413164630018', '1）该项目参与人员有杨为康、李旭、刘轩庭、陈建贤、刘非、丁亮、邓锡全、租车司机、廖绍毅、熊艳华、朱倪强、廖双。\n2）项目涉及多次进场，车辆使用天数为12天。', 83, '2023-07-08', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2023年3月27日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.6。', 20, '2023-08-04', '已核，建议结算。', 10, '2023-11-09', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870380', '1648881418642391041', '1）因项目负责人李仁贵在办理项目结算时只申报了激光技术中心的费用，漏报了测绘工程中心与航测遥感中心的费用。故补充办理结算。\n2）该项目于2020年7月10日~7月12日开展测绘工作。由杨振、罗友权、程昊参与，因现场工作时间为3日，不计台班费。', 83, '2023-07-23', NULL, 17, NULL, NULL, 46, '2023-08-02', '1.资料归档日期:2021年01月18日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.1。', 13, '2023-08-25', '已核，该项目为单价合同，按实际完成工作量结算，该项目共结算69530.00元。', 10, '2023-11-01', '情况属实，同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870381', '1648881410631270401', '按实际工作量上报。', 32, '2023-07-25', NULL, 17, NULL, '设备已完好归还', 46, '2023-07-27', '此结算为激光部分，质量满足成图要求，数据已归档。', 13, '2023-08-11', '已核，无异议。', 11, '2023-08-14', '同意结算', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870382', '1648881413483397121', '本项目外业按实际工作量结算金额为19318.1，项目实际开支13922（不含可报账部分），工作实际72人天（含进出场），平均单价75元；\n本项目现场交通条件及其困难，外业工作进本徒步开展，高差大，条件艰苦。建议按人天计算，建议单价600元/人天；', 61, '2023-07-15', '测区高程2840m', 17, '2023-07-17', '设备已完好归还', 46, '2023-07-18', '1.资料归档日期:2023年3月31日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.1。', 13, '2023-08-09', '已核，无异议。', 10, '2023-11-08', '根据项目任务零散、测区自然条件、交通条件困难等实际情况，建议外业按500/人天结算，实际绩效人均306元/天。\n建议结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870383', '1648881416243249154', NULL, 61, '2023-07-12', '测区平均高程2050米', 17, '2023-07-13', '设备已完好归还', 46, '2023-07-14', '1.资料归档日期:2021年8月25日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.5。', 13, '2023-09-19', '已核，平面控制等级未按照任务通知单要求实施，请作业单位严格按照任务通知单要求作业，特别是控制等级。', 10, '2023-09-28', 'E级平面控制测量，可参照水电规范为五等。\n同意结算。', 2, '2024-04-15', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870384', '1648881416130002945', NULL, 61, '2023-07-12', NULL, 17, '2023-07-13', '设备已完好归还', 46, '2024-02-21', '1.资料归档日期:2023年9月18日。\n2.成果工作量符合用户要求。\n3.测绘质量满足用户和相应规范要求。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870385', '1648881416146780162', NULL, 61, '2023-07-12', NULL, 17, '2023-07-13', '设备已完好归还', 46, '2023-07-18', '1.资料归档日期:2021年5月6日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.5。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870386', '1648881414410338305', NULL, 61, '2023-07-15', '本结算为项目变更且由公司完成部分，中水德方完成部分未统计计算。', 17, '2023-07-17', '设备已完好归还', 46, '2023-07-27', '1.资料归档日期:2023年7月4日。此结算不包括德方子公司工作量。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.1。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870387', '1648881414641025025', '1）OA办理结算仅能填报40项工作内容。由于JW项目涉及的生产部门多、成图方式多种、同一种产品涉及多部门合作完成等原因，采用EXCEL表格计算费用；\n2）本项目结算内容包含有2021C23、2021C24、2021C31、2021C38、2021C81、2022C19等工作内容，作业时间为2021年3月~2023年1月，所有完成工作量在“JW项目测绘产品-工作量统计表.xlsx”中已详细列明，另附有总测绘范围mdb文件；\n3）“JW项目测绘产品-结算明细表.xlsx”中，第1~8项为测绘工程中心的结算费用、第9~12项为航测遥感中心的费用、第13项为地理信息中心和激光技术中心的费用；\n4）由于该项目派镇至背崩区域作业条件艰苦，地质灾害（雪崩、泥石流、滑坡）频发，猛兽、毒蛇、毒虫活动频繁，本项目安全风险极高。该区域持续进行工程施工、新农村建设等，地形地物变化极快，已有的激光点云数据、卫片资料年限久远，居民点与工程区的变化极大，外业实测的工作量非常大。建议该区域测绘产品按照1.5系数进行外业结算。', 83, '2023-07-15', NULL, 17, '2023-07-17', '该项目2022年7月11日有两台V90（VA11604458 VA1160）工作中因为进水，没法维修，已报废；\n2022年7月16日与2023年4月12日还回的木脚架有4个损坏，修好2个。\n至今有5台华测i90和一些设备配件仍在使用', 46, '2023-07-18', '1.资料归档日期:2023年7月18日。\n2.成果工作量已核，符合用户要求。\n3.整体项目质量满足用户要求和相应规范，质量评分：87.4。另有质量问题的处罚通报见中测发［2021］32号。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870388', '1648881413667946498', '1）该项目参与人员有杨为康、蒋建虹、赵明焱、凌涛（司机），现场作业时间为2022年02月25日~2022年03月01日（5天）\n2）该项目由于涉及的工作量少、测区较分散等原因，现场开支了6168元，按工作量结算标准结算外业人均单价为67元/天，建议按照配合测量（一般地类）进行结算。', 83, '2023-07-08', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2022年5月24日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.6。', 20, '2023-09-05', '已核，建议结算。', 10, '2023-11-10', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870389', '1648881415333085186', '按照公司结算标准，填报了该项目结算清单。', 39, '2023-01-10', NULL, 17, '2023-01-10', '设备已完好归还', 46, '2023-07-26', '1.资料归档日期:2023年3月21日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：89.0。', 20, '2023-08-04', '已核，建议结算。', 10, '2023-08-04', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870390', '1648881411587571714', '激光数据采集工作量上报', 32, '2023-07-27', NULL, 17, NULL, '设备已完好归还', 46, '2023-07-27', '此结算为激光采集部分。质量满足成图需求，数据已归档。', 13, '2023-08-25', '已阅核，无异议。', 10, '2023-11-03', '此结算为激光技术中心工作内容，其余工作由德方公司完成。\n同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870391', '1648881411633709057', '项目业主也完成合同支付，正常结算。', 39, '2023-07-29', NULL, NULL, NULL, '设备已完好归还', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870392', '1648881414137708545', NULL, 61, '2023-07-12', NULL, 17, '2023-07-12', '设备已完好归还', 46, '2023-07-14', '1.资料归档日期:2021年12月24日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：82.7。', 20, '2023-08-09', '已核，建议结算。', 10, '2023-08-14', '同意结算。', 2, '2024-04-30', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870393', '1648881416029339649', '委外单位人员险现场参加工作，郑鹏现场管理、参与外业工作，同时完成质量检查及资料归档工作。', 61, '2023-07-10', '1、本次计算不包含委外费用；\n2、委外单位现场参与人员4人，累计工作54人天。', 17, '2023-07-10', '设备已完好归还', 46, '2023-07-12', '1.资料归档日期:2021年10月28日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.6。', 13, '2023-09-19', '已核，无异议。', 10, '2023-09-28', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870394', '1648881414037045250', NULL, 61, '2023-07-12', '测区平均海拔4520m', 17, '2023-07-12', '设备已完好归还', 46, '2023-07-14', '1.资料归档日期:2022年3月23日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.1。', 20, '2023-08-09', '已核，注意单位标注，比如卫片购买单位应为“项”。坐标高程等级应按合同要求布设。', 10, '2023-09-28', '同意结算。', 2, '2024-04-15', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870395', '1648881414389366785', NULL, 61, '2023-07-11', '测区平均海拔3000m', 17, '2023-07-12', '设备已完好归还', 46, '2024-04-08', '1.资料已归档。\n2.成果工作量已核，符合用户要求。\n3.过程中测绘质量问题2022年已作处罚，本次建议正常结算。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870396', '1648881410631270422', '根据部门与公司协议，大唐观音岩水电站2023年度变形监测控制网复测及坝前淤积和坝后冲刷测量项目按合同40%进行内部结算。', 102, '2024-05-14', NULL, 17, NULL, '设备已完好归还', 46, '2024-06-11', '1.资料已归档日期:2023年10月19日。\n2.成果工作量已核，符合用户要求。\n3.测绘质量满足用户和相应规范要求。质量评分：90.5。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870397', '1648881415911899138', '本项目委托成都林辉测绘服务有限公司完成外业工作、测绘工程中心负责委外管理、技术指导、质量检查及资料归档等工作。', 61, '2023-07-10', '与2021C42同时开展工作，进出场只计算一次，已计算在2021C42项目中。', 17, '2023-07-10', '设备已完好归还', 46, '2023-07-12', '1.资料归档日期:2021年9月17日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.9。', 13, '2023-08-23', '已核，无异议。', 10, '2023-09-28', '同意结算。', 2, '2024-04-15', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870398', '1648881411138781186', '测区平均高程4500米，高差1000米。进场日期20230522，出场日期20230529-20230530，进出场共三天。激光组4人加驾驶员1人。', 84, '2023-08-02', NULL, 17, NULL, '设备已完好归还', 46, '2023-08-02', '1.资料归档日期:2023年8月2日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.7。', 13, '2023-08-24', '已核，无异议。', 10, '2024-01-12', '同意结算。', 2, '2024-03-19', '可以按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870399', '1648881416163557378', '1）该项目参与人员为杨晶、凌涛、何涛，现场工作4天；', 83, '2023-06-27', NULL, 17, '2023-06-28', '设备已完好归还', 46, '2023-07-18', '1.资料归档日期:2023年7月18日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：82.3。', 20, '2023-08-04', '已核，建议结算。', 10, '2023-08-04', '同意结算。', 2, '2024-04-15', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870400', '1648881417149218818', '此项目为外委项目，由我管理此项目并整编资料。', 138, '2022-01-22', '此项目为外委项目，根据公司有关要求结算项目管理费用：1500元。', 112, '2022-01-25', '未借用仪器设备。', 50, '2022-04-15', '1.收到日期:2021年4月13日。\n2.工作量确认：工作量符合甲方要求，确认正确。\n3.质量评分：84.86分。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870401', '1648881411499491357', '利用已有资料成图，无外业工作', 84, '2023-09-13', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870402', '1648881411252027394', '按实际工作量完成', 32, '2024-04-07', NULL, 17, NULL, '该项目未借用设备', 46, '2024-04-09', '1.资料归档日期:2023年05月25日。\n2.成果工作量已核，符合用户要求。\n3.测绘质量满足用户和相应规范要求。质量评分：86.9。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870403', '1648881412170579969', '根据部门与公司协议，大唐观音岩水电站2022年度变形监测控制网复测及坝前淤积和坝后冲刷测量项目按合同40%进行内部结算。', 102, '2023-07-17', NULL, 17, NULL, '设备已完好归还', 46, '2023-07-26', '1.资料归档日期:2023年7月17日。\n2.成果工作量已核，符合用户要求。\n3.测绘质量满足用户要求和相应规范。质量评分：90.2。', 13, '2023-08-24', '已核，无异议。请项目负责人依照合同办理与甲方的结算。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870404', '1648881410929065985', '飞行组3人含驾驶员1人，测区平均高程400多米，高差300多米。进场20230227，出场20230303，共5天。', 84, '2023-08-23', NULL, 17, NULL, '设备已完好归还', 46, '2023-08-29', '1.资料归档日期:2023年8月25日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.8。', 20, '2023-09-14', '已核，建议结算。', 10, '2024-01-02', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870405', '1648881418126491649', NULL, 33, '2023-08-24', NULL, 17, NULL, '未领用仪器设备', 46, '2023-08-29', '1.资料归档日期:2023年8月22日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：83.4。', 20, '2023-09-14', '已核，建议结算。', 10, '2023-09-14', '同意结算。', 2, '2024-04-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870406', '1648881412124442625', NULL, 61, '2023-07-29', NULL, 17, NULL, '设备已完好归还\n车辆台班天数正确', 46, '2023-08-01', '1.资料归档日期:2022年11月28日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：89.6。', 13, '2023-08-23', '已核，该项目不单独签订合同，部分费用计入石棉县碳酸钙产业园项目地形图测绘技术服务合同。', 10, '2023-11-03', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870407', '1648881417782558721', '本项目有项目变更内容，在原有测图范围基础上，增加了瓦孜组连接道路补测及车渡码头1:1000地形图测绘工作。', 122, '2023-08-24', NULL, 17, NULL, '仪器设备完好', 46, '2023-08-29', '1.资料归档日期:2023年8月21日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.3。', 20, '2023-09-14', '已核，建议结算。', 10, '2023-12-11', '同意结算。', 2, '2024-03-19', '同意按此金额结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870408', '1648881413584060417', '该项目参与人员为杨振、廖绍毅、周建伟，现场工作时间为2022年03月02日~03月06日（共5天）', 83, '2023-06-29', NULL, 17, '2023-06-29', '设备已完好归还', 46, '2023-06-30', '1.资料归档日期:2022年6月27日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.4。', 13, '2023-09-07', '已核，无异议。', 10, '2023-11-12', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870409', '1648881411281387521', '按公司与项目业主签订的技术服务合同工作内容完成相关现场服务工作。', 120, '2023-10-07', '按公司与项目业主签订的技术服务合同工作内容完成相关现场服务工作，按照公司已审年度费用申报项目结算。', 17, NULL, '仪器为项目长期现场使用', 46, '2023-10-08', '工作量、质量满足合同及业主要求。', 13, '2023-10-13', '已核，无异议。', 11, '2023-11-03', '同意结算', 2, '2024-01-03', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870410', '1648881413806358530', '1）业主方两河口建设管理局每年对两河口工程进行先进评选，并对先进集体、个人发放奖金，两河口测量中心均有相关奖项获得。两河口测量中心的先进表彰奖金的结算办理到了2018年度，因此本次结算对2019-2022年的先进奖金进行申请。\n2）2021年8月17日从德方子公司借调员工唐小辉至两河口测量中心工作，截止2023年3月31日，唐小辉的绩效由总公司代付了19200元', 122, '2023-10-10', NULL, 17, NULL, '设备已完好归还', 46, '2024-02-20', '满足项目和业主的要求。', 13, '2024-06-24', '已阅知。', 10, '2024-06-24', '同意结算。', 7, '2024-06-25', '同意', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870411', '1648881410631270403', '按实际工作量上报', 32, '2023-08-28', NULL, 17, NULL, '设备已完好归还', 46, '2023-08-29', '1.资料归档日期:2023年8月22日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.1。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870412', '1648881413412093953', '结算明细见结算表', 61, '2023-07-15', '测区控制点平均高程2750m', 17, NULL, '设备已完好归还\n车辆台班天数正确', 46, '2023-08-01', '1.资料归档日期:2023年7月28日。\n2.成果工作量已核，符合用户要求。\n3.测绘质量满足用户要求和相应规范。质量评分：86.5。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870413', '1648881411419799553', '按照测量中心服务合同，现场正常开展工作。', 121, '2023-09-21', '测量中心项目2023年一直未借款，为了现场正常开展工作，经公司领导同意，测量中心项目年初可以办理结算，特申请结算。', 17, NULL, '金川测量中心领用的仪器设备长期在项目使用', 46, '2023-10-08', '工作量、质量满足合同及业主要求。', 20, '2023-11-01', '已核，建议结算。', 11, '2023-11-03', '同意结算', 2, '2024-03-18', '可以办理结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870414', '1648881411298164738', '按公司与业主签订的服务合同完成现场相关技术服务工作。', 120, '2023-10-07', NULL, 17, NULL, '仪器为项目长期现场使用', 46, '2023-10-08', '项目工作量、质量满足合同及业主要求。', 13, '2023-10-20', '已阅知，无异议。', 11, '2023-11-03', '同意结算', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870415', '1648881415962230785', NULL, 61, '2023-07-10', '1、测区平均高程2130，测区交通条件受限，地势陡峭，按困难地类申请结算；\n2、公司安排邓锡全驾驶公司车辆到达现场后出现故障，现场租用车辆开展工作；', 17, '2023-07-10', '设备已完好归还', 46, '2023-07-11', '现场工作质量和工作量满足用户要求。', 20, '2023-10-09', '已核，建议结算。', 10, '2023-10-16', '同意结算。', 2, '2024-04-15', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870416', '1648881418508173314', NULL, 51, '2023-08-02', NULL, 17, NULL, NULL, 46, '2023-08-02', '成果质量和工作量满足用户要求。成果已归档。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870417', '1648881418483007490', '补结算：地形图和点云做了两次。业主需要核实他自己已有地形图及界桩，用2000标准点云成了一遍图，后面又用500标准点云又成了一遍图。', 33, '2023-08-02', NULL, 17, NULL, NULL, 46, '2023-08-02', '1.资料归档日期:2020年11月25日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.0。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870418', '1648881412946526209', NULL, 61, '2023-07-15', '1、测区平均高程4180m（控制点高程平均）；\n2、项目作业难度不大，且公司承接单价低于市场价格，本次结算按结算标准的0.5执行；\n3、激光数据采集及飞行组住宿费用已经报销，本次结算不包含；', 17, '2023-07-17', '设备已完好归还', 46, '2023-08-01', '1.资料归档日期:2023年7月27日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：88.1。', 13, '2023-09-11', '已核，无异议。', 10, '2023-11-09', '测区海拔高，但地形简单，外业均按一般项目50%结算，不增加高原困难系数，\n建议结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870419', '1648881411847618561', NULL, 61, '2023-07-16', '测区高程2130m，外业增加5％系数；', 17, '2023-07-17', '设备已完好归还', 46, '2023-07-18', '1.资料归档日期:2023年3月21日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.1。', 20, '2023-09-05', '已核，建议结算。', 10, '2023-11-08', '同意结算。', 2, '2024-03-20', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870420', '1648881414095765505', NULL, 61, '2023-07-17', '本结算包含进出场、现场民工、船只费用等全部项目开支。', 17, '2023-07-17', '已安排并登记\n设备已完好归还', 46, '2024-02-21', '1.资料归档日期:2023年9月5日。\n2.成果工作量符合用户要求。\n3.测绘质量满足用户和相应规范要求。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870421', '1648881413860884481', '1、根据公司与项目议定的结算方式结算项目经费，本次结算费为桐子林和二滩监测项目2022年合计费用，桐子林2022年监测项目不再结算。\n2、考虑生产成本支出，质保金按5%暂扣。', 102, '2023-07-19', NULL, 17, NULL, '设备已完好归还', 46, '2023-08-09', '资料已归档，成果及工作量满足业主需要。', 13, '2023-08-23', '已核，无异议。', 10, '2023-11-03', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870422', '1648881413877661698', NULL, 61, '2023-07-15', '1、大雪封山步行前往测区开展工作，工作环境特别艰苦，按复杂地类结算；\n2、新能源项目外业按0.5系数结算，测区平均海拔3000左右，增加10％；\n3、项目实际成本5937，现场实际工天50人天；', 17, NULL, '设备已完好归还\n车辆台班天数正确', 46, '2023-08-01', '1.资料归档日期:2023年3月31日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.9。', 13, '2023-09-08', '已核，无异议。', 10, '2023-11-09', '由于测区条件特别困难、冬季大雪天气作业，外业按一般地区实际人天结算、不扣台班费。\n建议结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870423', '1648881413684723714', NULL, 61, '2023-07-15', NULL, 17, '2023-07-17', '设备已完好归还', 46, '2023-07-28', '1.资料归档日期:2023年7月27日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.6。', 20, '2023-09-14', '已核，建议结算。', 10, '2023-11-09', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870424', '1648881412422238210', '实际完成工作量见实际工作量统计表。', 61, '2023-07-17', '本项目测区交通条件极差，岸上工作基本靠人工徒步开展，测区跨度大，有效作业时间短，实质性工作内容较少，安全风险高，按工作量结算单价低，按合同金额的30％申请结算，费用包含配合测量、安全学习及考试、坝前多波速扫描、民工、租船、专家评审等所有成本。', NULL, NULL, '该项目发生作业员摔伤事故，领用的全站仪被摔后出现故障，带回公司经维修后可继续使用，无维修费。\n车辆台班费无误。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870425', '1648881410962620417', '按实际工作量上报', 32, '2024-04-07', '其他工作内容均由德方完成', 17, NULL, '设备已完好归还', 46, '2024-04-09', '工作量和质量满足项目要求。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870426', '1648881410945843202', '按实际工作量上报', 32, '2024-04-07', NULL, 17, NULL, '该项目所用华测激光设备为激光技术中心自行维护与保管', 46, '2024-04-08', '满足项目要求。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870427', '1648881412552261633', '由于王明洋离职，本项目结算由刘媛媛提交。', 32, '2023-07-22', NULL, 17, NULL, '设备已完好归还', 46, '2024-01-12', '1.资料归档日期:2023年3月22日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户和相应规范要求。质量评分：86.5。', 13, '2024-05-21', '已阅知，无异议。', 11, '2024-05-21', '同意结算', 7, '2024-05-21', '同意', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870428', '1648881410660630529', '按实际工作量上报。', 32, '2023-07-25', NULL, 17, NULL, '设备已完好归还', 46, '2023-07-27', '此结算为激光采集部分。成果质量满足成图要求，数据已归档。', 13, '2023-08-07', '已核，与计划工作量匹配。', 10, '2024-01-02', '同意结算。', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870429', '1648881411612737537', '根据实际情况上报激光数据采集工作量。', 32, '2023-07-27', NULL, 17, NULL, '设备已完好归还', 46, '2023-07-27', '此结算为激光采集部分。质量满足成图需求，数据已归档。', 13, '2023-09-08', '已阅，无异议。', 10, '2023-11-03', '本结算为激光技术中心工作量，其余工作有德方公司承担。\n同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870430', '1648881419619663874', '确权类项目，持续时间特别长，正常结算。', 39, '2023-07-29', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870431', '1648881414213206018', NULL, 61, '2023-07-12', NULL, 17, '2023-07-12', '设备已完好归还', 46, '2023-07-14', '1.资料归档日期:2021年12月10日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：88.1。', 20, '2023-08-09', '已核，建议结算。', 10, '2023-09-28', '同意结算。', 2, '2024-04-15', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870432', '1648881414154485761', '本项目实际参与人员3人，累计工作21人天（含进出场），按标准结算1476.8，现场实际成本13641.2，可分配平均单价52.6元/人天；\n建议按工天结算，平均成本649.5（含租车），建议按1150元每人天计算。', 61, '2023-07-12', NULL, 17, '2023-07-12', '设备已完好归还', 46, '2023-07-28', '1.资料归档日期:2023年7月27日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：87.0。', 13, '2023-08-23', '已核，无异议。（该项工作不单独签订合同，费用计入XR预可（加深）阶段合同中）', 10, '2023-08-28', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870433', '1648881415588937730', NULL, 61, '2023-07-12', '项目终止，现场只开展了部分控制点埋设工作，按配合人天申请结算。', 17, '2023-07-13', '设备已完好归还', 46, '2023-09-12', '项目临时终止，已做控制点埋设满足计划。', 13, '2023-09-19', '已核，项目终止，内部结算建议按申报金额结算。', 10, '2023-09-28', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870434', '1648881411122003970', NULL, 33, '2023-09-12', '作业时间5天，不扣台班。', 17, NULL, '设备已完好归还', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870435', '1648881411499491337', 'ABH项目地形图,1:10000地形图共100幅，数据转换处理。10人1天，共10人天。', 84, '2023-12-20', NULL, 17, NULL, '该项目未借用仪器设备', 46, '2023-12-20', '满足项目要求，加班完成。', 20, '2023-12-28', '建议按此结算。', 10, '2024-05-17', '同意结算。', 7, '2024-05-17', '同意按次结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870436', '1648881415219838978', '已按合同要求全部完成', 49, '2023-10-08', '工作已全部完成，资料已归档，费用已到账90%。', 17, NULL, '设备已完好归还', 46, '2023-10-08', '已归档，项目质量、工作量满足合同要求，通过业主验收评审。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870437', '1648881411499491335', NULL, 83, '2024-02-06', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870438', '1648881412107665410', '按成果表实际完成工作量上报。', 120, '2023-09-27', '工作量按成果表上报，单价按公司核定计算，专项费用按公司领导审批同意上报。', 17, NULL, '设备已完好归还', 46, '2023-10-08', '控制网复测工作量、质量满足合同及业主要求。', 13, '2023-10-20', '已阅知，无异议。', 11, '2023-11-03', '同意结算', 2, '2024-01-03', '同意结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870439', '1648881414951403522', '该项目参与人员为杨振、罗友权、张书伟、蒋剑虹，现场工作9天；', 83, '2023-06-28', NULL, 17, '2023-06-28', '设备已完好归还', 46, '2023-06-30', '1.资料归档日期:2022年12月8日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.0。', 20, '2023-09-14', '已核，建议结算。', 10, '2024-02-21', '同意结算。', 2, '2024-03-19', '同意按此金额结算，项目承担部门须提供真实分配表，财务部视资金情况尽快支付。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870440', '1648881412204134402', '1）该项目参与人员为：廖绍毅、赵明焱、凌涛、董旭棚。作业时间为：2022年10月3日-10月14日（12天）；\n2）激光技术中心1:5000测绘区域按照1:2000的精度进行数据采集及点云预处理。', 83, '2023-07-07', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2023年3月21日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.1。', 20, '2023-08-04', '与主合同工作量略有出入，建议结算。', 10, '2023-11-10', '同意结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870441', '1648881415609909250', NULL, 33, '2023-06-25', NULL, 17, '2023-06-25', '设备已完好归还', 46, '2023-06-28', '1.资料归档日期:2022年4月13日。\n2.工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：88.8。', 13, '2023-09-15', '已阅核，无异议。', 10, '2023-11-01', '同意结算。', 2, '2024-04-05', '该项目甲方是：勘设股份，因控制测量精度问题，还有30%的合同经费未收到，建议发展部须关注。同意按此金额结算', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870442', '1648881416935309313', NULL, 61, '2024-04-07', '按前期标准结算', 17, NULL, '设备已完好归还', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870443', '1648881414049628162', NULL, 61, '2023-07-12', NULL, 17, '2023-07-13', '设备已完好归还', 46, '2023-07-28', '1.资料归档日期:2023年7月27日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：85.6。', 13, '2023-08-23', '已核，无异议。（该项目甲方不再与我方签订合同）。', 10, '2023-09-28', '同意结算。', 2, '2024-04-15', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870444', '1648881410631270405', '本项目内部结算采用项目承包制形式结算。本项目合同金额为952923元，参照2022W18-国网拉萨发电公司2022年直孔大坝、羊湖压力钢管等定期变形监测及年度资料整编技术服务项目的结算标准，本项目按照合同金额25%进行结算。特此申请，请领导审批！', 101, '2024-06-01', '结算标准参考同类型项目2022W18-国网拉萨发电公司2022年直孔大坝、羊湖压力钢管等定期变形监测及年度资料整编技术服务项目', 17, NULL, '该项目领用未归还的设备，将继续用于国网拉萨发电公司2024年直孔、羊湖电站变形监测及资料整编（2024W11）', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870445', '1648881413844107265', '大渡河猴子岩水电站外部变形监测工程施工承包项目于2022年12月31日结束合同工期，本项目由于时间跨度长达11年（2012年3月～2022年12月），整个竣工审计工作于2023年4月～2023年11月正式结束，本项目经最终竣工审计审定后合同总金额为4601.46万元。由于本项目在2022年底之前甲方已一共支付4077.35万元合同款（共办理过33期中间支付结算），剩余的524.12万元合同款也在2023年11月通过最终竣工审计审定工作之后甲方也全部进行了支付（2024年2月7日已支付）。由于本项目最终审计审定后的合同额524.12万元，部门尚未办理公司内部结算，特此申请办理。至此，大渡河猴子岩水电站外部变形监测工程所有工作全部结束，公司内部结算办理本次为最末次。请领导审批！', 101, '2024-06-01', '本项目按照往年历次内部结算标准办理，本次结算办理为该项目最末次内部结算申请。', 17, NULL, '设备借用周期较长，项目结束后主要仪器设备已如数完好归还', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870446', '1648881415047872514', '工作量核实后重新提交', 33, '2024-04-09', NULL, 17, NULL, '设备已完好归还', 46, '2024-04-09', '1.资料归档日期:2022年11月17日。\n2.成果工作量符合合同要求。\n3.测绘质量满足用户和相应规范要求。质量评分：88.6。', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870447', '1648881415530217473', NULL, 61, '2023-07-10', '增加高程系数5%。', 17, '2023-07-11', '设备已完好归还', 46, '2023-07-12', '1.资料归档日期:2021年8月13日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：88.2。', 13, '2023-08-09', '已核，无异议。', 10, '2023-08-14', '同意结算。', 2, '2024-04-15', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870448', '1648881410631270406', '该项目为整体委外，分包合同金额8000元整；土石方平衡报告由地理信息中心完成；', 112, '2023-08-22', NULL, 17, NULL, '委外项目不涉及公司仪器设备的领用', 46, '2023-08-29', '1.资料归档日期:2023年8月25日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：88.3。', 13, '2023-09-07', '已核，无异议。', 11, '2023-09-08', '同意结算', 2, '2024-04-05', '未见合同信息，经营发展部须尽快追办，同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870449', '1648881413114298369', '1）该项目由于甲方新增了测绘工作，进出场两次。项目参与人员有杨为康、刘轩庭、陈建贤、熊艳华；\n2）由于该项目工作量少且测区较分散，按照工作量结算人均单价为80元/天，建议按照配合配合测量结算；', 83, '2023-07-09', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2022年11月7日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：84.9。', 20, '2023-08-04', '已核，建议结算。', 10, '2023-11-09', '建议按实际人天结算外业。\n建议结算。', 2, '2024-04-05', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870450', '1648881412329963522', '详情见附件', 59, '2024-01-23', '申请结算2020年至2023年的费用，结算总额583910元，其中生产成本384070元，拟结算绩效199840元。', 17, NULL, '设备已完好归还', 46, '2024-02-02', '已通过业主验收，资料已归档。该项目工作量不以成果为单位统计。', 20, '2024-02-20', '建议结算。', 11, '2024-02-22', '同意结算', 2, '2024-03-19', '同意按此金额结算。', NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `cmc_settle` VALUES ('1648881415047870451', '1648881412665507842', '1）该项目参与人员有廖绍毅、黄建春、陈建贤，现场工作日期为2022年7月8日~7月12日（共5天）；\n2）由于横断面测量长度短，按结算标准备注，不足200米按200米统计。', 83, '2023-07-07', NULL, 17, '2023-07-10', '设备已完好归还', 46, '2023-07-10', '1.资料归档日期:2023年4月17日。\n2.成果工作量已核，符合用户要求。\n3.成果已提交用户使用，测绘质量满足用户要求和相应规范。质量评分：86.0。', 20, '2023-09-11', '已核，建议结算。经营发展部尽快完善合同签订工作。', 10, '2024-01-26', '同意结算。', 2, '2024-03-19', '同意按此金额进行结算', NULL, NULL, NULL, NULL, NULL, NULL);

-- ----------------------------
-- 63、cmc经费计算表
-- ----------------------------
drop table if exists `cmc_settle_work`;
create table `cmc_settle_work`  (
  `work_id`			bigint not null  auto_increment comment '工作内容id',
  `settle_id`		char(19)		default null	comment '结算id',
  `content`			varchar(255)	default null	comment '工作内容',
  `price_id` 		int 			default null 	comment '结算单价id',
  `workload` 		double 			default null 	comment '工作量',
  `coefficient` 	double 			default null 	comment '系数',
  `ground_type` 	char(1) 		default null 	comment '地类',
  `settle` 			decimal(10, 2) 	default null 	comment '项目经费',
  `remark` 			varchar(255) 	default null 	comment '备注',
  primary key (`work_id`)
) engine = innodb comment = 'cmc经费计算表';

-- ----------------------------
-- 初始化-经费计算表数据
-- ----------------------------
INSERT INTO `cmc_settle_work` VALUES (1, '1648881415047870018', '地形图测绘', 0, 0.51, 1, NULL, 0.00, '2处');
INSERT INTO `cmc_settle_work` VALUES (2, '1648881415047870018', '地形图测绘', 0, 0.39, 1, NULL, 0.00, '大沙坝1#隧道、燕子岩棚洞、4标滑坡、2标溜沙坡，共4处');
INSERT INTO `cmc_settle_work` VALUES (3, '1648881415047870018', '2标猴子岩影像航飞拼接', 0, 1.63, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (4, '1648881415047870018', '控制点测量', 0, 12, 1, NULL, 0.00, '每处2点');
INSERT INTO `cmc_settle_work` VALUES (5, '1648881415047870018', '项目委托管理费用', 0, 1, 1, NULL, 24000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (6, '1648881415047870019', '现场配合测量', 0, 36, 1, NULL, 12960.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (7, '1648881415047870020', '断面基点复测', 0, 81, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (8, '1648881415047870020', '断面测量', 0, 8.8, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (9, '1648881415047870020', '库容计算', 0, 1, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (10, '1648881415047870020', '安全培训等误工', 0, 28, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (11, '1648881415047870020', '进出场', 0, 10, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (12, '1648881415047870020', '断面淤积分析', 0, 41, 1, NULL, 51800.00, '项目总体费用');
INSERT INTO `cmc_settle_work` VALUES (13, '1648881415047870103', '地形图测绘（外业）', 0, 2.53, 1, NULL, 21289.90, NULL);
INSERT INTO `cmc_settle_work` VALUES (14, '1648881415047870103', '地形图测绘（内业）', 0, 2.53, 1, NULL, 13080.10, NULL);
INSERT INTO `cmc_settle_work` VALUES (15, '1648881415047870103', '实景三维模型（GIS内业）', 0, 3.63, 1, NULL, 3412.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (16, '1648881415047870103', '地形图测绘（外业）', 0, 15.33, 1, NULL, 26904.20, '11处，增加难度系数20%');
INSERT INTO `cmc_settle_work` VALUES (17, '1648881415047870103', '地形图测绘（内业）', 0, 15.33, 1, NULL, 12647.30, NULL);
INSERT INTO `cmc_settle_work` VALUES (18, '1648881415047870103', '实景三维模型（GIS内业）', 0, 51.68, 1, NULL, 7752.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (19, '1648881415047870103', '无人机航飞', 0, 24, 1, NULL, 9600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (20, '1648881415047870103', '进出场', 0, 10, 1, NULL, 3300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (21, '1648881415047870103', '库容计算（GIS内业）', 0, 1, 1, NULL, 2000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (22, '1648881415047870021', '机载激光地形图测绘', 0, 6.041, 1, NULL, 4349.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (23, '1648881415047870021', '机载激光地形图测绘（内业）', 0, 6.041, 1, NULL, 3975.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (24, '1648881415047870021', '钻孔测量', 0, 1, 1, NULL, 80.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (25, '1648881415047870021', '控制点测量', 0, 21, 1, NULL, 2100.00, 'RTK测量，刻石点位');
INSERT INTO `cmc_settle_work` VALUES (26, '1648881415047870021', '外业进出场', 0, 8, 1, NULL, 2640.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (27, '1648881415047870021', '地形图坐标系转换与接边（内业）', 0, 3, 1, NULL, 540.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (28, '1648881415047870022', '二滩、桐子林水电站大坝外部变形观测及谷坡稳定性监测', 0, 1, 1, NULL, 975800.00, '具体工作内容见合同');
INSERT INTO `cmc_settle_work` VALUES (29, '1648881415047870022', '项目调整费用（8-12月）', 0, 1, 1, NULL, 50000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (30, '1648881415047870023', 'GNSS测量', 0, 4, 1, NULL, 5568.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (31, '1648881415047870023', 'GNSS测量', 0, 10, 1, NULL, 9280.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (32, '1648881415047870023', '枢纽区地形图修测', 0, 20, 1, NULL, 51840.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (33, '1648881415047870023', '库区地形图测绘', 0, 11, 1, NULL, 3135.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (34, '1648881415047870023', '枢纽区地形图测绘（内业）', 0, 20, 1, NULL, 11260.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (35, '1648881415047870023', '库区地形图测绘（内业）', 0, 11, 1, NULL, 1100.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (36, '1648881415047870023', '河道纵断面测量', 0, 14, 1, NULL, 5152.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (37, '1648881415047870023', '横断面测量', 0, 1, 1, NULL, 1360.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (38, '1648881415047870023', '同时水面线测量', 0, 6, 1, NULL, 3978.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (39, '1648881415047870023', '外业进出场', 0, 8, 1, NULL, 4800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (40, '1648881415047870024', '控制点坐标系转换', 0, 20, 1, NULL, 300.00, '1980西安坐标系转换为2000坐标系，并按要求格式提交转换成果');
INSERT INTO `cmc_settle_work` VALUES (41, '1648881415047870025', '外业控制点联测', 0, 3, 1, NULL, 1080.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (42, '1648881415047870025', '地形图坐标系转换', 0, 1, 1, NULL, 180.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (43, '1648881415047870025', '成都钻孔测量', 0, 2, 1, NULL, 432.00, '勘测中心');
INSERT INTO `cmc_settle_work` VALUES (44, '1648881415047870025', '德阳无人机飞行', 0, 2, 1, NULL, 720.00, '水利院');
INSERT INTO `cmc_settle_work` VALUES (45, '1648881415047870026', '厂址地形图测绘', 0, 0.12, 1, NULL, 360.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (46, '1648881415047870026', '公路地形图测绘', 0, 0.13, 1, NULL, 390.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (47, '1648881415047870026', '桥址地形图测绘', 0, 0.25, 1, NULL, 4250.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (48, '1648881415047870026', '外业进出场', 0, 6, 1, NULL, 1980.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (49, '1648881415047870026', '地形图编辑（内业）', 0, 0.25, 1, NULL, 58.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (50, '1648881415047870026', '地形图编辑（内业）', 0, 0.25, 1, NULL, 470.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (51, '1648881415047870057', '地形地类图测绘补测（外业）', 0, 9.61, 1, NULL, 16865.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (52, '1648881415047870057', 'GPS点测量', 0, 6, 1, NULL, 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (53, '1648881415047870057', '地地形地类图编绘（内业）', 0, 9.61, 1, NULL, 2594.70, NULL);
INSERT INTO `cmc_settle_work` VALUES (54, '1648881415047870057', '无人机飞行（委外）', 0, 1, 1, NULL, 21000.00, '包干飞行，现金支付。');
INSERT INTO `cmc_settle_work` VALUES (55, '1648881415047870057', '进出场', 0, 8, 1, NULL, 2640.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (56, '1648881415047870057', '空三、内业测图（委外）', 0, 9.5, 1, NULL, 13110.00, '总价委外，合同支付');
INSERT INTO `cmc_settle_work` VALUES (57, '1648881415047870058', 'GNSS测量', 0, 172, 1, NULL, 86000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (58, '1648881415047870058', '控制点埋设', 0, 149, 1, NULL, 22350.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (59, '1648881415047870058', '三角高程测量', 0, 126, 1, NULL, 23184.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (60, '1648881415047870058', '进出场', 0, 18, 1, NULL, 5400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (61, '1648881415047870058', '现场租车', 0, 13, 1, NULL, 3380.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (62, '1648881415047870058', '现场协调、材料费', 0, 1, 1, NULL, 2500.00, '甲方现场费用');
INSERT INTO `cmc_settle_work` VALUES (63, '1648881415047870058', '分公司车辆、仪器等', 0, 1, 1, NULL, 53650.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (64, '1648881415047870059', '资料内业整理', 0, 15, 1, NULL, 3150.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (65, '1648881415047870060', '断面测量', 0, 2.7, 1, NULL, 2754.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (66, '1648881415047870060', '水边线测量', 0, 4.6, 1, NULL, 2286.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (67, '1648881415047870060', '水下地形图测绘', 0, 0.08, 1, NULL, 1920.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (68, '1648881415047870060', '断面基点测量', 0, 12, 1, NULL, 1440.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (69, '1648881415047870060', '水下地形图编辑（内业）', 0, 0.08, 1, NULL, 180.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (70, '1648881415047870060', '进出场', 0, 10, 1, NULL, 3300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (71, '1648881415047870061', '无人机飞行现场误工', 0, 32, 1, NULL, 11520.00, '2019.7.18-7.31（李仁贵、周建伟、黄建春、王刚）');
INSERT INTO `cmc_settle_work` VALUES (72, '1648881415047870061', '现场项目管理与质量整编', 0, 14, 1, NULL, 7056.00, '2019.7.18-7.31杨振');
INSERT INTO `cmc_settle_work` VALUES (73, '1648881415047870061', '外业委外', 0, 1, 1, NULL, 100000.00, '45个风机位，3处公路地形图，GNSS、图根点测量总价');
INSERT INTO `cmc_settle_work` VALUES (74, '1648881415047870061', '地形图编绘', 0, 1.41, 1, NULL, 2650.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (75, '1648881415047870061', '地形图编绘', 0, 1.56, 1, NULL, 429.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (76, '1648881415047870001', 'GNSS测量', 0, 10, 1, NULL, 8700.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (77, '1648881415047870001', '导线、三角高程测量', 0, 15, 1, NULL, 6435.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (78, '1648881415047870001', '公路中桩测设', 0, 1213, 1, NULL, 36390.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (79, '1648881415047870001', '公路参考点测量', 0, 2265, 1, NULL, 13590.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (80, '1648881415047870001', '进出场', 0, 15, 1, NULL, 7425.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (81, '1648881415047870001', '机票、托运、租车、保险等费用', 0, 1, 1, NULL, 28073.00, '不再报销其他费用');
INSERT INTO `cmc_settle_work` VALUES (82, '1648881415047870002', '泸县国土三调服务项目', 0, 1, 1, NULL, 135405.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (83, '1648881415047870003', '硬梁包水电站拟设矿区范围拐点坐标转换', 0, 4, 1, NULL, 80.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (84, '1648881415047870003', '泸定山盛水泥拟设矿区拐点坐标转换', 0, 7, 1, NULL, 140.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (85, '1648881415047870004', '占地图', 0, 24, 1, NULL, 360.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (86, '1648881415047870004', '公路中桩、边桩转换', 0, 16, 1, NULL, 240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (87, '1648881415047870004', '导线点转换', 0, 16, 1, NULL, 240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (88, '1648881415047870005', '东河外业测点', 0, 3, 1, NULL, 1080.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (89, '1648881415047870005', '东河图形转换', 0, 16, 1, NULL, 240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (90, '1648881415047870005', '东河点位转换', 0, 16, 1, NULL, 240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (91, '1648881415047870005', '三河一海点位转换', 0, 8, 1, NULL, 120.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (92, '1648881415047870006', '控制点外业联测', 0, 2, 1, NULL, 800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (93, '1648881415047870006', '汤坝料场坐标转换', 0, 16, 1, NULL, 240.00, '从原图的坐标系转换成2000坐标系');
INSERT INTO `cmc_settle_work` VALUES (94, '1648881415047870007', '红线范围图坐标系转换', 0, 16, 1, NULL, 240.00, '内业负责：冉洪芳');
INSERT INTO `cmc_settle_work` VALUES (95, '1648881415047870007', '点位坐标转换', 0, 4, 1, NULL, 60.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (96, '1648881415047870007', '现场控制点联测、浒湾控制点恢复', 0, 6, 1, NULL, 2400.00, '外业负责：丁亮');
INSERT INTO `cmc_settle_work` VALUES (97, '1648881415047870008', '地形图坐标系转换', 0, 16, 1, NULL, 240.00, '内业负责：吴凯');
INSERT INTO `cmc_settle_work` VALUES (98, '1648881415047870008', '现场控制点测量', 0, 3, 1, NULL, 1200.00, '外业负责：郑鹏');
INSERT INTO `cmc_settle_work` VALUES (99, '1648881415047870009', '孟底沟坐标系转换', 0, 32, 1, NULL, 480.00, '实际转换263点');
INSERT INTO `cmc_settle_work` VALUES (100, '1648881415047870009', '楞古坐标转换', 0, 32, 1, NULL, 480.00, '实际转换160点');
INSERT INTO `cmc_settle_work` VALUES (101, '1648881415047870009', '牙根二级坐标转换', 0, 32, 1, NULL, 480.00, '实际转换147点');
INSERT INTO `cmc_settle_work` VALUES (102, '1648881415047870009', '两河口坐标转换', 0, 32, 1, NULL, 480.00, '实际转换192点');
INSERT INTO `cmc_settle_work` VALUES (103, '1648881415047870009', '雅上范围线提取及转换', 0, 12, 1, NULL, 2520.00, '航测遥感中心');
INSERT INTO `cmc_settle_work` VALUES (104, '1648881415047870009', '木能达高程系提取及转换', 0, 6, 1, NULL, 1260.00, '航测遥感中心');
INSERT INTO `cmc_settle_work` VALUES (105, '1648881415047870009', '温波坐标转换', 0, 16, 1, NULL, 240.00, '实际转换117点');
INSERT INTO `cmc_settle_work` VALUES (106, '1648881415047870009', '外业控制点联测', 0, 12, 1, NULL, 5280.00, '粟志成、王金浩。路途长、海拔高，增加10%。');
INSERT INTO `cmc_settle_work` VALUES (107, '1648881415047870009', '外业控制点联测', 0, 2, 1, NULL, 800.00, '两河口测量中心');
INSERT INTO `cmc_settle_work` VALUES (108, '1648881415047870009', 'SHP文件合并生成数据库文件', 0, 18, 1, NULL, 3780.00, '何杰等');
INSERT INTO `cmc_settle_work` VALUES (109, '1648881415047870011', '地形图测绘（外业）', 0, 2.54, 1, NULL, 19431.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (110, '1648881415047870011', '特征点高程测量（外业）', 0, 78, 1, NULL, 1404.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (111, '1648881415047870011', '无人机飞行（外业）', 0, 4, 1, NULL, 1440.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (112, '1648881415047870011', '地形图测绘（内业）', 0, 2.54, 1, NULL, 11938.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (113, '1648881415047870011', '断面测量', 0, 14, 1, NULL, 1960.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (114, '1648881415047870011', '外业租车', 0, 3, 1, NULL, 1500.00, '李仁贵、杨振车辆');
INSERT INTO `cmc_settle_work` VALUES (115, '1648881415047870012', '沿滩区第三次全国国土调查服务', 0, 1, 1, NULL, 71095.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (116, '1648881415047870013', '地形图测绘', 0, 3, 1, NULL, 0.00, '含水库水下地形');
INSERT INTO `cmc_settle_work` VALUES (117, '1648881415047870013', 'DEM制作', 0, 3, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (118, '1648881415047870013', '库容计算', 0, 1, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (119, '1648881415047870013', '项目委托费用', 0, 1, 1, NULL, 78000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (120, '1648881415047870014', '地形图复测（委外）', 0, 1.5, 1, NULL, 39750.00, '按合同支付');
INSERT INTO `cmc_settle_work` VALUES (121, '1648881415047870014', '内业地形图修改', 0, 7, 1, NULL, 1470.00, '按甲方要求修改');
INSERT INTO `cmc_settle_work` VALUES (122, '1648881415047870014', '外业管理及项目资料整编', 0, 1, 1, NULL, 1200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (123, '1648881415047870027', '地形图复测（委外）', 0, 1.1, 1, NULL, 29150.00, '按合同支付');
INSERT INTO `cmc_settle_work` VALUES (124, '1648881415047870027', '横断面测量（委外）', 0, 1.8, 1, NULL, 2376.00, '按合同支付');
INSERT INTO `cmc_settle_work` VALUES (125, '1648881415047870027', '内业地形图修改', 0, 13, 1, NULL, 2730.00, '按甲方要求修改、整编');
INSERT INTO `cmc_settle_work` VALUES (126, '1648881415047870027', '外业项目管理与质量整编', 0, 1, 1, NULL, 2000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (127, '1648881415047870028', '坐标系转换', 0, 16, 1, NULL, 240.00, '原坐标系转国家2000坐标系坐标、kml、shp文件。');
INSERT INTO `cmc_settle_work` VALUES (128, '1648881415047870029', '料场横断面测量', 0, 23.63, 1, NULL, 8884.90, '工作量按地质专业现场要求为准');
INSERT INTO `cmc_settle_work` VALUES (129, '1648881415047870030', '地形图测绘（外业）', 0, 0.01, 1, NULL, 720.00, '按配合测量结算。');
INSERT INTO `cmc_settle_work` VALUES (130, '1648881415047870030', '地形图编绘（内业）', 0, 0.01, 1, NULL, 100.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (131, '1648881415047870031', '郫都区第三次全国土地调查项目（包二）', 0, 1, 1, NULL, 418400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (132, '1648881415047870032', '新津县国土三调监理服务', 0, 1, 1, NULL, 115800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (133, '1648881415047870033', '边角网观测', 0, 3, 1, NULL, 5220.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (134, '1648881415047870033', '三角高程测量', 0, 2.45, 1, NULL, 588.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (135, '1648881415047870033', '水准测量', 0, 4.25, 1, NULL, 2040.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (136, '1648881415047870033', '外业进出场', 0, 10, 1, NULL, 3300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (137, '1648881415047870034', '地形图测绘外业', 0, 2.714, 1, NULL, 7694.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (138, '1648881415047870034', '地形图测绘（内业）', 0, 2.714, 1, NULL, 5373.70, NULL);
INSERT INTO `cmc_settle_work` VALUES (139, '1648881415047870034', '地形图测绘外业', 0, 1.716, 1, NULL, 13127.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (140, '1648881415047870034', '地形图测绘（内业）', 0, 1.716, 1, NULL, 8871.70, NULL);
INSERT INTO `cmc_settle_work` VALUES (141, '1648881415047870034', '无人机飞行 ', 0, 10, 1, NULL, 3600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (142, '1648881415047870015', '地形图测绘外业', 0, 3.8, 1, NULL, 29070.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (143, '1648881415047870015', '地形图测绘外业（未调绘补测）', 0, 4.3, 1, NULL, 11515.40, '调绘补测委外');
INSERT INTO `cmc_settle_work` VALUES (144, '1648881415047870015', '无人机飞行', 0, 12, 1, NULL, 4320.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (145, '1648881415047870015', '三维实景模型（粗模）', 0, 11, 1, NULL, 1650.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (146, '1648881415047870015', '影像快拼', 0, 11, 1, NULL, 550.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (147, '1648881415047870015', '地形图内业测绘编辑（委外）', 0, 8.1, 1, NULL, 41100.00, '空三、测图、编图，合同支付');
INSERT INTO `cmc_settle_work` VALUES (148, '1648881415047870015', '地形图调绘补测（委外）', 0, 4.3, 1, NULL, 17200.00, '项目代付');
INSERT INTO `cmc_settle_work` VALUES (149, '1648881415047870015', '进出场', 0, 8, 1, NULL, 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (150, '1648881415047870016', '地形图测量（人工、外业）', 0, 0.04, 1, NULL, 1360.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (151, '1648881415047870016', '地形图测量（内业）', 0, 0.04, 1, NULL, 177.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (152, '1648881415047870016', '特征点测量（化粪池）', 0, 13, 1, NULL, 1040.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (153, '1648881415047870016', '进出场', 0, 12, 1, NULL, 3600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (154, '1648881415047870017', 'GNSS观测', 0, 6, 1, NULL, 6552.00, '增加工作量');
INSERT INTO `cmc_settle_work` VALUES (155, '1648881415047870017', '边角网观测（基准网）', 0, 17, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (156, '1648881415047870017', '边角网观测（监测网）', 0, 21, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (157, '1648881415047870017', '水准观测', 0, 1321, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (158, '1648881415047870017', '水准观测', 0, 314, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (159, '1648881415047870017', '仪器损坏', 0, 1, 1, NULL, -1200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (160, '1648881415047870017', '项目委托费用', 0, 1, 1, NULL, 229475.00, '项目约定委托费用（不含GNSS测量）');
INSERT INTO `cmc_settle_work` VALUES (161, '1648881415047870224', '两河口移民代建工程施工测量测绘服务（2021）', 0, 1, 1, NULL, 120000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (162, '1648881415047870164', '羊湖电厂泵站进水渠地形地类图修测（外业）', 0, 1.26, 1.3, '0', 10319.40, '外业修补测量大，实测面积按总图面积的80％统计（最终成图面积2.15）');
INSERT INTO `cmc_settle_work` VALUES (163, '1648881415047870164', '内业-编图/地形图数字化', 0, 1.72, 1, '0', 681.10, '按外业预估实测面积，参照外业实测地形图编绘单价结算');
INSERT INTO `cmc_settle_work` VALUES (164, '1648881415047870164', '泵站进水渠下游侧雅江河道断面测绘', 0, 2.038, 1.3, '0', 1854.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (165, '1648881415047870256', '租车费用', 0, 1, 1, NULL, 1100.00, '现场租车，11.03租车300,11.04租车400,11.10租车400');
INSERT INTO `cmc_settle_work` VALUES (166, '1648881415047870256', '快递', 0, 1, 1, NULL, 1627.00, '快递设备费用727元及购买电瓶900元');
INSERT INTO `cmc_settle_work` VALUES (167, '1648881415047870210', '外业-地形图测绘/地形图(无人机)测绘', 0, 15.25, 1.25, '1', 30881.30, '重点河段1:2000地形图测绘');
INSERT INTO `cmc_settle_work` VALUES (168, '1648881415047870210', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 66.63, 1.25, '1', 16990.60, '非重点河段1:10000');
INSERT INTO `cmc_settle_work` VALUES (169, '1648881415047870210', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 103.17, 1, '1', 4849.00, '困难河段1:5万地形图测绘');
INSERT INTO `cmc_settle_work` VALUES (170, '1648881415047870210', '内业-航测/地形图航测', 0, 15.25, 1.1, '0', 12581.30, '测绘工程中心内业组完成，含空三加密。');
INSERT INTO `cmc_settle_work` VALUES (171, '1648881415047870210', '内业-DOM/DOM制作', 0, 15.25, 1, '0', 2287.50, '测绘工程中心内业组完成');
INSERT INTO `cmc_settle_work` VALUES (172, '1648881415047870088', '汤坝新址地形地类图测绘', 0, 0.3, 1, NULL, 7800.00, '地形地类图根据地类、权属复杂程度增加 30%');
INSERT INTO `cmc_settle_work` VALUES (173, '1648881415047870052', '枢纽区左岸地形图测绘', 0, 0.8, 1, NULL, 526.40, '利用机载激光数据内业成图。');
INSERT INTO `cmc_settle_work` VALUES (174, '1648881415047870052', '枢纽区右岸地形图测绘', 0, 0.6, 1, NULL, 394.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (175, '1648881415047870053', '房屋立面图测绘（外业）', 0, 27, 1, NULL, 7020.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (176, '1648881415047870053', '房屋立面图测绘（内业）', 0, 15, 1, NULL, 3150.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (177, '1648881415047870053', '委外管理与资料整编（外业）', 0, 14, 1, NULL, 2940.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (178, '1648881415047870053', '立面图测量委外', 0, 1, 1, NULL, 60000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (179, '1648881415047870054', '地形图测绘（外业）', 0, 11.2, 1, NULL, 31752.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (180, '1648881415047870054', '地形图测绘（内业委外）', 0, 11.2, 1, NULL, 31360.00, '空三、测图、编图、根据外业断面资料修改');
INSERT INTO `cmc_settle_work` VALUES (181, '1648881415047870054', '道路边线测量', 0, 18, 1, NULL, 6480.00, '51km');
INSERT INTO `cmc_settle_work` VALUES (182, '1648881415047870054', 'GNSS点测量', 0, 15, 1, NULL, 9750.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (183, '1648881415047870054', 'GNSS点测量', 0, 40, 1, NULL, 12000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (184, '1648881415047870054', 'GNSS点测量', 0, 21, 1, NULL, 1470.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (185, '1648881415047870054', '高程测量', 0, 74.2, 1, NULL, 13356.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (186, '1648881415047870054', '中桩放样', 0, 3238, 1, NULL, 58284.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (187, '1648881415047870054', '无人机飞行', 0, 18, 1, NULL, 6480.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (188, '1648881415047870054', '横断面测量', 0, 310.9, 1, NULL, 21763.00, '公路定测按常规断面10%');
INSERT INTO `cmc_settle_work` VALUES (189, '1648881415047870054', '空域现场协调', 0, 1, 1, NULL, 2000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (190, '1648881415047870055', '断面测量、参考点测量', 0, 12, 1, NULL, 4800.00, '需要甲方签字认可工作量');
INSERT INTO `cmc_settle_work` VALUES (191, '1648881415047870056', '地形图测绘（外业）', 0, 14, 1, NULL, 18900.00, '共3处');
INSERT INTO `cmc_settle_work` VALUES (192, '1648881415047870056', '进出场（外业）', 0, 4, 1, NULL, 1320.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (193, '1648881415047870056', '地形图测绘（内业）', 0, 14, 1, NULL, 11550.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (194, '1648881415047870109', 'GNSS测量', 0, 8, 1, NULL, 6000.00, '高程系数1.5');
INSERT INTO `cmc_settle_work` VALUES (195, '1648881415047870109', '三角高程测量', 0, 22.4, 1, NULL, 4233.60, '高程系数1.5');
INSERT INTO `cmc_settle_work` VALUES (196, '1648881415047870109', '地形图测绘（外业）', 0, 55.58, 1, NULL, 26261.60, '高程系数1.5');
INSERT INTO `cmc_settle_work` VALUES (197, '1648881415047870109', 'DOM制作', 0, 6, 1, NULL, 900.00, '由张学仪完成，计入外业。');
INSERT INTO `cmc_settle_work` VALUES (198, '1648881415047870109', '地形图测绘（内业空三）', 0, 55.58, 1, NULL, 1222.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (199, '1648881415047870109', '地形图测绘（内业）', 0, 25.1, 1, NULL, 5522.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (200, '1648881415047870109', '地形图测绘（内业委外）', 0, 30.5, 1, NULL, 12200.00, '实际工作量30.48，一口价12200元。');
INSERT INTO `cmc_settle_work` VALUES (201, '1648881415047870109', '无人机飞行', 0, 4, 1, NULL, 2160.00, '高程系数1.5');
INSERT INTO `cmc_settle_work` VALUES (202, '1648881415047870109', '卫片购买费', 0, 1, 1, NULL, 43000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (203, '1648881415047870099', '已完成工作内容预算', 0, 1, 1, NULL, 436870.00, '按已完成工作经费的70%预算。');
INSERT INTO `cmc_settle_work` VALUES (204, '1648881415047870092', '猴子岩监测（5月～12月）', 0, 1, 1, NULL, 1114887.80, '5月～12月产值3716292.63元');
INSERT INTO `cmc_settle_work` VALUES (205, '1648881415047870154', 'GNSS测量', 0, 11, 1, '0', 0.00, '委外，联测3个已知点');
INSERT INTO `cmc_settle_work` VALUES (206, '1648881415047870154', '导线测量（五等导线、四等三角高程）', 0, 22.279, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (207, '1648881415047870154', '水毁各工点地形图测绘', 0, 0.074, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (208, '1648881415047870070', '地形图测绘（岸上外业）', 0, 5.22, 1, NULL, 14798.70, NULL);
INSERT INTO `cmc_settle_work` VALUES (209, '1648881415047870154', '测绘确定水毁各工点位置，路线破坏长度、现有路面标高等', 0, 800, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (210, '1648881415047870154', '现场工作', 0, 19, 1, '0', 3420.00, '杨为康现场参与工作，含进出场');
INSERT INTO `cmc_settle_work` VALUES (211, '1648881415047870095', '转换点采集', 0, 12, 1, NULL, 1200.00, '内业由陈尚云完成');
INSERT INTO `cmc_settle_work` VALUES (212, '1648881415047870095', '米易县用地红线坐标转换（转换成国家2000大地坐标系）', 0, 16, 1, NULL, 240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (213, '1648881415047870095', '盐边县用地红线坐标转换（转换成国家2000大地坐标系）', 0, 16, 1, NULL, 240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (214, '1648881415047870095', '米易县用地红线CGCS2000宗地图制作', 0, 8, 1, NULL, 120.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (215, '1648881415047870101', '两河口移民代建工程施工测量2019年度测绘服务', 0, 48, 1, NULL, 480000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (216, '1648881415047870095', '盐边县用地红线CGCS2000宗地图制作', 0, 8, 1, NULL, 120.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (217, '1648881415047870092', '猴子岩监测（1月～4月）', 0, 1, 1, NULL, 503809.80, '1月～4月产值1679365.97元');
INSERT INTO `cmc_settle_work` VALUES (218, '1648881415047870094', '全域1:500数字化地形（地籍）测量预结算', 0, 191.14, 1, NULL, 65000.00, '本次为预结算。项目正式结算时减扣预结算费用。');
INSERT INTO `cmc_settle_work` VALUES (219, '1648881415047870154', '现场踏勘', 0, 3, 1, '0', 1080.00, '杨为康同院里交通专业人员一起现场踏勘');
INSERT INTO `cmc_settle_work` VALUES (220, '1648881415047870089', '地形图测绘（含水下地形）', 0, 0.39, 1, NULL, 2457.00, '水流急不能测绘水下地形河段，只测绘水边线');
INSERT INTO `cmc_settle_work` VALUES (221, '1648881415047870089', '同时水面线测量', 0, 2, 1, NULL, 840.00, '测点要求密集，必须换算成同时水位，并说明测量时间');
INSERT INTO `cmc_settle_work` VALUES (222, '1648881415047870089', '猴子岩大桥下游约200m处横断面测量', 0, 0.3, 1, NULL, 210.00, '记录测量时间、基点坐标及猴子岩同时刻出库流量');
INSERT INTO `cmc_settle_work` VALUES (223, '1648881415047870089', '猴子岩尾水出口横断面测量', 0, 0.3, 1, NULL, 210.00, '记录测量时间及同时刻尾水发电流量');
INSERT INTO `cmc_settle_work` VALUES (224, '1648881415047870089', '断面基点', 0, 4, 1, NULL, 360.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (225, '1648881415047870089', '外业进出场', 0, 8, 1, NULL, 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (226, '1648881415047870154', '资料检查、报告编写及归档', 0, 7, 1, '0', 1512.00, '委外资料搜集汇总并归档，工期约7人天');
INSERT INTO `cmc_settle_work` VALUES (227, '1648881415047870041', '大断面测量', 0, 4.6, 1, NULL, 2622.00, '实测3.50km，23条');
INSERT INTO `cmc_settle_work` VALUES (228, '1648881415047870041', '同时水面线测量', 0, 12.867, 1, NULL, 4400.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (229, '1648881415047870041', '洪痕点测量', 0, 3, 1, NULL, 300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (230, '1648881415047870041', '进出场', 0, 14, 1, NULL, 4200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (231, '1648881415047870088', '控制点', 0, 2, 1, NULL, 400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (232, '1648881415047870043', '孔玉乡泥洛河坝地形图测绘（外业）', 0, 0.14, 1, NULL, 1260.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (233, '1648881415047870043', '格宗乡江口沟地形图测绘（外业）', 0, 1.96, 1, NULL, 6703.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (234, '1648881415047870043', '泥洛河坝至菩提河坝地形图测绘（外业）', 0, 0.165, 1, NULL, 1485.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (235, '1648881415047870043', '黑牛场地形图测绘（外业）', 0, 0.05, 1, NULL, 752.50, '内业302元');
INSERT INTO `cmc_settle_work` VALUES (236, '1648881415047870043', '地形图编辑（内业）', 0, 0.305, 1, NULL, 1576.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (237, '1648881415047870043', '地形图编辑（内业）', 0, 1.96, 1, NULL, 3880.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (238, '1648881415047870043', '无人机飞行（外业）', 0, 6, 1, NULL, 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (239, '1648881415047870043', '进出场（外业）', 0, 8, 1, NULL, 2640.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (240, '1648881415047870044', '堰塞体左岸现状地形图', 0, 0.39, 1, NULL, 2234.70, NULL);
INSERT INTO `cmc_settle_work` VALUES (241, '1648881415047870044', '堰塞体左岸现状三维模型', 0, 0.39, 1, NULL, 180.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (242, '1648881415047870044', '现场等待', 0, 15, 1, NULL, 6000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (243, '1648881415047870044', '进出场', 0, 18, 1, NULL, 5940.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (244, '1648881415047870045', '闪珠寺移民安置点供水工程地形地类图（外业）', 0, 0.17, 1, NULL, 393.70, NULL);
INSERT INTO `cmc_settle_work` VALUES (245, '1648881415047870045', '闪珠寺移民安置点供水工程地形地类图（内业）', 0, 0.17, 1, NULL, 161.30, NULL);
INSERT INTO `cmc_settle_work` VALUES (246, '1648881415047870045', '双柏树取水口地形地类图（外业）', 0, 0.1, 1, NULL, 1287.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (247, '1648881415047870045', '双柏树取水口地形地类图（内业）', 0, 0.1, 1, NULL, 594.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (248, '1648881415047870045', '双柏树输水管线地形地类图（外业）', 0, 1.56, 1, NULL, 3613.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (249, '1648881415047870045', '双柏树输水管线地形地类图（内业）', 0, 1.56, 1, NULL, 1478.90, NULL);
INSERT INTO `cmc_settle_work` VALUES (250, '1648881415047870045', '控制点测量（外业）', 0, 6, 1, NULL, 1200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (251, '1648881415047870045', '无人机飞行（外业）', 0, 12, 1, NULL, 4800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (252, '1648881415047870045', '进出场（外业）', 0, 10, 1, NULL, 3300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (253, '1648881415047870045', '误工（外业）', 0, 10, 1, NULL, 3600.00, '部分任务中途取消');
INSERT INTO `cmc_settle_work` VALUES (254, '1648881415047870088', '进出场', 0, 6, 1, NULL, 1800.00, '3人');
INSERT INTO `cmc_settle_work` VALUES (255, '1648881415047870164', '直孔水电站地形图测绘（外业）', 0, 0.03, 1.3, '0', 663.00, '人工实测');
INSERT INTO `cmc_settle_work` VALUES (256, '1648881415047870164', '内业-编图/地形图数字化', 0, 0.03, 1, '0', 33.80, '人工实测地形图编绘');
INSERT INTO `cmc_settle_work` VALUES (257, '1648881415047870164', '现场配合测量', 0, 18, 1, '0', 7200.00, '等待公司确认下一个项目，项目组3人、等待6天');
INSERT INTO `cmc_settle_work` VALUES (258, '1648881415047870164', '外业-其他/进出场', 0, 6, 1, '1', 1980.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (259, '1648881415047870164', '现场租车', 0, 10, 1, '0', 6000.00, '含油费');
INSERT INTO `cmc_settle_work` VALUES (260, '1648881415047870256', '激光采集外业住宿费用', 0, 40, 1, NULL, 3920.00, '按实际住宿费用');
INSERT INTO `cmc_settle_work` VALUES (261, '1648881415047870172', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 3.17, 1.3, '0', 4945.20, '地形图成图面积3.17平方（坎娘碱性骨料料场2.3，雪巴滑坡0.87），利用老航片测图');
INSERT INTO `cmc_settle_work` VALUES (262, '1648881415047870070', 'GNSS测量', 0, 9, 1, NULL, 1710.00, '布设在测区外围及中部重要位置');
INSERT INTO `cmc_settle_work` VALUES (263, '1648881415047870046', '名山区前进乡沿河村地形图测绘（外业）', 0, 1.78, 1, NULL, 13617.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (264, '1648881415047870046', '无人机飞行', 0, 2, 1, NULL, 720.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (265, '1648881415047870046', '外业进出场', 0, 6, 1, NULL, 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (266, '1648881415047870046', '地形图编辑（内业）', 0, 1.78, 1, NULL, 1260.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (267, '1648881415047870046', '内业地形图测绘（委外）', 0, 1.78, 1, NULL, 8900.00, '空三、测图、调绘上图');
INSERT INTO `cmc_settle_work` VALUES (268, '1648881415047870047', '猴子岩监测(1～3月）', 0, 1, 1, NULL, 438964.00, '一季度产值1463214元');
INSERT INTO `cmc_settle_work` VALUES (269, '1648881415047870047', '猴子岩监测(4～6月）', 0, 1, 1, NULL, 575242.00, '二季度产值1917475');
INSERT INTO `cmc_settle_work` VALUES (270, '1648881415047870047', '猴子岩监测(7～9月）', 0, 1, 1, NULL, 315447.00, '三季度产值1051489元');
INSERT INTO `cmc_settle_work` VALUES (271, '1648881415047870048', '地形图测绘', 0, 0.5, 1, NULL, 1417.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (272, '1648881415047870048', '地形图内业测绘（委外）', 0, 0.5, 1, NULL, 1500.00, '合同支付');
INSERT INTO `cmc_settle_work` VALUES (273, '1648881415047870048', '无人机飞行', 0, 3, 1, NULL, 1080.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (274, '1648881415047870048', '空三、地形图编绘（内业）', 0, 0.5, 1, NULL, 420.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (275, '1648881415047870048', '进出场', 0, 6, 1, NULL, 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (276, '1648881415047870049', '水库区地形图坐标转换', 0, 16, 1, NULL, 240.00, '转为国家2000坐标系');
INSERT INTO `cmc_settle_work` VALUES (277, '1648881415047870049', '建设区地形图坐标转换', 0, 16, 1, NULL, 240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (278, '1648881415047870050', '公路放线测量（外业）', 0, 49, 1, NULL, 19600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (279, '1648881415047870050', '现场开支（甲方现场）', 0, 1, 1, NULL, 11277.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (280, '1648881415047870051', '地形图测绘', 0, 0.16, 1, NULL, 2720.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (281, '1648881415047870266', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 36, 1.2, '0', 17280.00, '平均海拔2000多米，测区温度最低零下十几度，激光技术中心完成，朱倪强、万龙卿，12月5号-12月22号。');
INSERT INTO `cmc_settle_work` VALUES (282, '1648881415047870266', '交通费用', 0, 1, 1, NULL, 1215.00, '进场时由成都院项目部统一购买火车票，后被告知需自行承担费用。当时公司财务已关闭2022年账务，无法将发票');
INSERT INTO `cmc_settle_work` VALUES (283, '1648881415047870102', '兴隆水库枢纽区地形地类图补测', 0, 0.4, 1, NULL, 828.00, '完成时间尽快，时间很紧，测完及时交给冯春。');
INSERT INTO `cmc_settle_work` VALUES (284, '1648881415047870266', '外业采集住宿费用', 0, 1, 1, NULL, 2520.00, '按实际住宿费用。');
INSERT INTO `cmc_settle_work` VALUES (285, '1648881415047870067', 'GNSS测量', 0, 10, 1, NULL, 5800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (286, '1648881415047870067', '导线测量（代替三角高程）', 0, 11.021, 1, NULL, 3152.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (287, '1648881415047870067', '地形图测绘（航测外业）', 0, 1.668, 1, NULL, 15012.00, '包括张牙沟、4#供水站、表土堆放场地地形图测绘，以及八窝龙施工平整场地复核的航飞和地面工作。');
INSERT INTO `cmc_settle_work` VALUES (288, '1648881415047870067', '地形图测绘', 0, 1.73, 1, NULL, 34600.00, '包括枢纽区、马金子施工临时营地，含编图');
INSERT INTO `cmc_settle_work` VALUES (289, '1648881415047870067', '地形图测绘（航测内业）', 0, 1.668, 1, NULL, 8623.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (290, '1648881415047870067', '坝区三维地形面制作', 0, 1.57, 1, NULL, 1727.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (291, '1648881415047870067', '无人机飞行', 0, 18, 1, NULL, 7200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (292, '1648881415047870067', '进出场', 0, 28, 1, NULL, 8400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (293, '1648881415047870193', '芦稿溪、兴隆沟、马边河河道大断面测量', 0, 8.22, 1, '0', 4685.40, '28条断面');
INSERT INTO `cmc_settle_work` VALUES (294, '1648881415047870193', '涉水建筑物（拦河景观堰、桥梁）高程测量', 0, 33, 1, '0', 363.00, '参照临时界桩、地质点标准');
INSERT INTO `cmc_settle_work` VALUES (295, '1648881415047870193', '断面基点', 0, 56, 1, '0', 5040.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (296, '1648881415047870069', '地形图测绘（外业）', 0, 4.019, 1, NULL, 12535.30, NULL);
INSERT INTO `cmc_settle_work` VALUES (297, '1648881415047870069', '水下地形测量（含内业）', 0, 0.17, 1, NULL, 2142.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (298, '1648881415047870069', '地形图测绘（内业）', 0, 4.019, 1, NULL, 7957.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (299, '1648881415047870069', '大断面测量', 0, 0.4, 1, NULL, 308.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (300, '1648881415047870069', '水面线测量', 0, 3.671, 1, NULL, 1380.30, NULL);
INSERT INTO `cmc_settle_work` VALUES (301, '1648881415047870069', '断面基点测量', 0, 4, 1, NULL, 200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (302, '1648881415047870069', '无人机飞行', 0, 10, 1, NULL, 4000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (303, '1648881415047870069', '现场复核', 0, 2, 1, NULL, 800.00, '现场复核地形图及孔位高程');
INSERT INTO `cmc_settle_work` VALUES (304, '1648881415047870069', '进出场', 0, 18, 1, NULL, 5400.00, '水下地形测绘单独进场');
INSERT INTO `cmc_settle_work` VALUES (305, '1648881415047870193', '断面坐标转换', 0, 56, 1, '0', 840.00, '项目结束后，按业主要求转换断面基点坐标系统');
INSERT INTO `cmc_settle_work` VALUES (306, '1648881415047870193', '外业进出场', 0, 6, 1, '0', 1800.00, '朱倪强、夏志军，周建伟3人进出场');
INSERT INTO `cmc_settle_work` VALUES (307, '1648881415047870192', '坝址区地形图测绘（外业）', 0, 10.66, 1.2, '0', 16117.90, '直升机飞行激光数据及影像，激光点云成图外业按0.2计算，不包括水下地形图面积');
INSERT INTO `cmc_settle_work` VALUES (308, '1648881415047870192', '坝址区地形图测绘（内业）', 0, 10.66, 1, '0', 12578.80, '航测遥感中心完成（激光成图），不包括水下地形图面积');
INSERT INTO `cmc_settle_work` VALUES (309, '1648881415047870192', '坝址区水下地形图测绘', 0, 0.8, 1.2, '0', 6048.00, '测绘工程中心测量并编辑');
INSERT INTO `cmc_settle_work` VALUES (310, '1648881415047870192', '内业-DEM、地形面/DEM、三维地形面制作', 0, 11.46, 1, '0', 5157.00, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (311, '1648881415047870192', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 9, 1.2, '0', 7128.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (312, '1648881415047870192', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 3, 1.2, '0', 1425.60, '利用旧点按60%计算');
INSERT INTO `cmc_settle_work` VALUES (313, '1648881415047870192', '外业-导线测量/导线测量', 0, 3, 1.2, '0', 720.00, '只统计导线工作量');
INSERT INTO `cmc_settle_work` VALUES (314, '1648881415047870192', '外业-高程测量/三角高程测量、单程双测', 0, 12.7, 1.2, '0', 2688.30, '单程双测，含导线部分的高程测量');
INSERT INTO `cmc_settle_work` VALUES (315, '1648881415047870072', '地形地类图测绘', 0, 0.3, 1, NULL, 7350.00, '外业实测，总费用委托。');
INSERT INTO `cmc_settle_work` VALUES (316, '1648881415047870072', '地形地类图编绘', 0, 0.3, 1, NULL, 136.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (317, '1648881415047870073', '鸡公堰带状地形图测绘', 0, 0.1, 1, NULL, 7500.00, '总价委托。');
INSERT INTO `cmc_settle_work` VALUES (318, '1648881415047870073', '控制点测量及现场质检', 0, 8, 1, NULL, 2080.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (319, '1648881415047870073', '资料整理', 0, 2, 1, NULL, 420.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (320, '1648881415047870074', '机载激光地形图测绘外业', 0, 0.2, 1, NULL, 1020.00, '植被茂密、地物补测较多，外业增加困难系数50%。');
INSERT INTO `cmc_settle_work` VALUES (321, '1648881415047870074', '机载激光地形图测绘内业', 0, 0.2, 1, NULL, 587.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (322, '1648881415047870074', '外业进出场', 0, 6, 1, NULL, 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (323, '1648881415047870075', '带状地形图测绘', 0, 0.242, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (324, '1648881415047870075', '取水口地形图测绘', 0, 0.027, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (325, '1648881415047870075', '外业工天统计', 0, 32, 1, NULL, 11520.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (326, '1648881415047870075', '带状地形图测绘（内业）', 0, 0.242, 1, NULL, 296.90, NULL);
INSERT INTO `cmc_settle_work` VALUES (327, '1648881415047870075', '取水口地形图测绘（内业）', 0, 0.027, 1, NULL, 228.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (328, '1648881415047870076', 'GNSS测量', 0, 6, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (329, '1648881415047870076', 'GNSS测量', 0, 88, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (330, '1648881415047870076', '水准测量', 0, 53.89, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (331, '1648881415047870076', '三角高程测量', 0, 17.36, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (332, '1648881415047870076', '地形图测绘', 0, 5.72, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (333, '1648881415047870076', '地形图测绘', 0, 78, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (334, '1648881415047870076', '地形图测绘', 0, 33.9, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (335, '1648881415047870076', '河道纵断面测量', 0, 94.4, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (336, '1648881415047870076', '横断面测量', 0, 1.06, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (337, '1648881415047870076', '同时水面线测量', 0, 6.16, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (338, '1648881415047870076', '进出场', 0, 40, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (339, '1648881415047870076', '项目委托管理费用', 0, 1, 1, NULL, 358000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (340, '1648881415047870077', '地形图测绘', 0, 0.05, 1, NULL, 1000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (341, '1648881415047870077', '公路中桩放测', 0, 128, 1, NULL, 2560.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (342, '1648881415047870077', '进出场', 0, 4, 1, NULL, 1320.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (343, '1648881415047870078', '地形图测绘（内业）', 0, 0.291, 1, NULL, 1367.70, NULL);
INSERT INTO `cmc_settle_work` VALUES (344, '1648881415047870078', '地形图测绘（外业）', 0, 0.291, 1, NULL, 3339.20, '四次作业，小面积，外业增加50%');
INSERT INTO `cmc_settle_work` VALUES (345, '1648881415047870079', '库区交通公路江边地形图（外业）', 0, 0.6, 1, NULL, 3078.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (346, '1648881415047870079', '坝区潜在不稳定体治理地形图（外业）', 0, 1.5, 1, NULL, 7695.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (347, '1648881415047870079', '坝区潜在不稳定体治理三维建模（GIS）', 0, 1.5, 1, NULL, 1260.00, '两次');
INSERT INTO `cmc_settle_work` VALUES (348, '1648881415047870079', '控制点测量(外业）', 0, 4, 1, NULL, 1200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (349, '1648881415047870079', '地形图测绘（内业）', 0, 2.1, 1, NULL, 7276.50, '多种数据融合出来，增加0.5');
INSERT INTO `cmc_settle_work` VALUES (350, '1648881415047870079', '无人机飞行（外业）', 0, 24, 1, NULL, 9600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (351, '1648881415047870079', '进出场（外业）', 0, 22, 1, NULL, 7260.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (352, '1648881415047870080', '无人机飞行及配合', 0, 12, 1, NULL, 4800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (353, '1648881415047870080', '正射影像（DOM）制作', 0, 6.24, 1, NULL, 1029.60, '由罗业华等完成，计入外业部门便于统计。');
INSERT INTO `cmc_settle_work` VALUES (354, '1648881415047870080', '进出场', 0, 8, 1, NULL, 2640.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (355, '1648881415047870081', 'GNSS测量', 0, 19, 1, NULL, 7524.00, '复测');
INSERT INTO `cmc_settle_work` VALUES (356, '1648881415047870081', '三角高程测量', 0, 45.36, 1, NULL, 10668.70, '单程双测');
INSERT INTO `cmc_settle_work` VALUES (357, '1648881415047870081', '进出场', 0, 8, 1, NULL, 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (358, '1648881415047870035', '地形图测绘（外业）', 0, 5.03, 1, NULL, 6790.50, '共7处');
INSERT INTO `cmc_settle_work` VALUES (359, '1648881415047870035', '地形图测绘（外业）', 0, 3.43, 1, NULL, 612.26, '1处');
INSERT INTO `cmc_settle_work` VALUES (360, '1648881415047870035', '地形图测绘（内业）', 0, 5.03, 1, NULL, 4149.75, '共7处');
INSERT INTO `cmc_settle_work` VALUES (361, '1648881415047870035', '地形图测绘（内业）', 0, 3.43, 1, NULL, 343.00, '1处');
INSERT INTO `cmc_settle_work` VALUES (362, '1648881415047870035', '影像购买', 0, 1, 1, NULL, 5000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (363, '1648881415047870035', '进出场', 0, 8, 1, NULL, 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (364, '1648881415047870036', '现场配合测量', 0, 36, 1, NULL, 12960.00, '2019年3月');
INSERT INTO `cmc_settle_work` VALUES (365, '1648881415047870036', '现场配合测量', 0, 18, 1, NULL, 6480.00, '2019年7月');
INSERT INTO `cmc_settle_work` VALUES (366, '1648881415047870036', '现场配合测量', 0, 16, 1, NULL, 5760.00, '2019年7月');
INSERT INTO `cmc_settle_work` VALUES (367, '1648881415047870037', '现场配合测量', 0, 69, 1, NULL, 24840.00, '2019年5月');
INSERT INTO `cmc_settle_work` VALUES (368, '1648881415047870037', '现场配合测量', 0, 21, 1, NULL, 7560.00, '2019年7月');
INSERT INTO `cmc_settle_work` VALUES (369, '1648881415047870037', '现场配合测量', 0, 33, 1, NULL, 11880.00, '2019年10月');
INSERT INTO `cmc_settle_work` VALUES (370, '1648881415047870038', '泥沙断面监测', 0, 1, 1, NULL, 51800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (371, '1648881415047870040', '束水墙铺盖监测外业', 0, 36, 1, NULL, 12960.00, '2次监测');
INSERT INTO `cmc_settle_work` VALUES (372, '1648881415047870040', '内业数据处理', 0, 2, 1, NULL, 4000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (373, '1648881415047870040', '物探专业现场开支', 0, 2, 1, NULL, 1930.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (374, '1648881415047870040', '租船费', 0, 2, 1, NULL, 4620.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (375, '1648881415047870114', '地形图放大', 0, 0.45, 1, NULL, 207.90, '原坝区1:2000地形图放大为1:1000地形图');
INSERT INTO `cmc_settle_work` VALUES (376, '1648881415047870115', 'S220公路占地范围坐标转换', 0, 6, 1, NULL, 1980.00, 'S220沿线占地范围，跨度约30km。转为国家2000坐标系。');
INSERT INTO `cmc_settle_work` VALUES (377, '1648881415047870139', '左岸泄洪雾化区地形图测绘（内业）', 0, 1.87, 1, NULL, 3702.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (378, '1648881415047870139', '左岸泄洪雾化区地形图测绘（外业）', 0, 1.87, 1, NULL, 5301.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (379, '1648881415047870139', '左岸泄洪雾化区三维地形面制作', 0, 1.87, 1, NULL, 841.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (380, '1648881415047870139', '左岸泄洪雾化区DOM制作', 0, 1.87, 1, NULL, 561.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (381, '1648881415047870139', '无人机飞行', 0, 1, 1, NULL, 400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (382, '1648881415047870227', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 9, 0, '0', 0.00, '外协');
INSERT INTO `cmc_settle_work` VALUES (383, '1648881415047870227', '内业-激光制图/激光数据制作地形图', 0, 20.63, 1, NULL, 0.00, '外协');
INSERT INTO `cmc_settle_work` VALUES (384, '1648881415047870227', '内业-DEM、地形面/DEM、三维地形面制作', 0, 20.63, 1, '0', 4126.00, '三维地形面制作，激光技术中心');
INSERT INTO `cmc_settle_work` VALUES (385, '1648881415047870227', '项目管理费', 0, 1, 1, '0', 3300.00, '外协合同额165040，按2%合同额');
INSERT INTO `cmc_settle_work` VALUES (386, '1648881415047870100', '两河口移民代建工程施工测量2020年度测绘服务', 0, 33, 1, NULL, 330000.00, '按约定标准结算');
INSERT INTO `cmc_settle_work` VALUES (387, '1648881415047870430', '外业-航飞/无人机航飞(飞行项目）', 0, 127, 1, '0', 50800.00, '包括倾斜摄影房屋采集试点，2镇数据航飞');
INSERT INTO `cmc_settle_work` VALUES (388, '1648881415047870430', '外业-地形图测绘/地形图外业实测', 0, 153.43, 0.16, '0', 73646.40, '图幅为1:500，按照1:2000标准调绘即按照1:2000标准结算。机载激光成图，即系数0.2*0.8=0.16。调绘总工天：3');
INSERT INTO `cmc_settle_work` VALUES (389, '1648881415047870108', '控制点测量', 0, 10, 1, NULL, 1000.00, '按甲方要求布测，内部结算土建费用');
INSERT INTO `cmc_settle_work` VALUES (390, '1648881415047870108', '地形图测绘（外业）', 0, 1.95, 1, NULL, 1930.50, '带状增加10%');
INSERT INTO `cmc_settle_work` VALUES (391, '1648881415047870108', '无人机航飞', 0, 4, 1, NULL, 1440.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (392, '1648881415047870108', '地形图测绘（内业）', 0, 1.95, 1, NULL, 1608.75, NULL);
INSERT INTO `cmc_settle_work` VALUES (393, '1648881415047870108', '进出场', 0, 8, 1, NULL, 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (394, '1648881415047870430', '外业调绘租车', 0, 93, 1, '0', 18600.00, '外业调绘程昊开车，申请按照租车200元/天计算');
INSERT INTO `cmc_settle_work` VALUES (395, '1648881415047870430', '内业-三维模型/实景三维模型制作', 0, 51.39, 0.7, '0', 42268.30, '实际飞行按照2cm、3cm飞行，数据量更大，采集房屋用，按0.7折计算。');
INSERT INTO `cmc_settle_work` VALUES (396, '1648881415047870430', '内业-房屋采集（航测遥感中心）', 0, 2683, 1, '0', 13415.00, '模型采集5元/户。');
INSERT INTO `cmc_settle_work` VALUES (397, '1648881415047870430', '内业-房屋采集（地理信息中心）', 0, 3290, 1, '0', 16450.00, '模型采集5元/户。');
INSERT INTO `cmc_settle_work` VALUES (398, '1648881415047870195', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 2, 1, '0', 1000.00, '新建控制点。');
INSERT INTO `cmc_settle_work` VALUES (399, '1648881415047870195', '外业-高程测量/三角高程测量、单程双测', 0, 9.465, 1, '0', 1669.60, '单程双测。');
INSERT INTO `cmc_settle_work` VALUES (400, '1648881415047870195', '外业-地形图测绘/地形图(无人机)测绘', 0, 1.388, 1, '0', 10618.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (401, '1648881415047870430', '内业-其他/配合测量', 0, 56, 1, '0', 11760.00, '出具样图、蟠龙镇改图、接边、数据整理等其他工作。');
INSERT INTO `cmc_settle_work` VALUES (402, '1648881415047870195', '内业-航测/地形图航测', 0, 1.388, 1.1, '0', 7176.00, '空三加密。');
INSERT INTO `cmc_settle_work` VALUES (403, '1648881415047870195', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 800.00, '2人*1天。');
INSERT INTO `cmc_settle_work` VALUES (404, '1648881415047870195', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '3人*2天。');
INSERT INTO `cmc_settle_work` VALUES (405, '1648881415047870192', '外业-其他/无人机航飞', 0, 15, 1.2, '0', 7200.00, '王刚激光飞行1人5天、夏志军、丁亮、朱倪强、周建伟、陈建贤6人配合基站架设等工作1天、陈建贤进出场4人天');
INSERT INTO `cmc_settle_work` VALUES (406, '1648881415047870381', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 3, 1.2, '0', 1440.00, '吴振、朱倪强、熊艳华2023.04.07-2023.04.07，高差556');
INSERT INTO `cmc_settle_work` VALUES (407, '1648881415047870195', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 2, 0.6, '0', 600.00, '利用旧点。');
INSERT INTO `cmc_settle_work` VALUES (408, '1648881415047870192', '外业进出场', 0, 20, 1, '0', 6600.00, '夏志军、周建伟、丁亮、朱倪强、王刚5人，4天');
INSERT INTO `cmc_settle_work` VALUES (409, '1648881415047870381', '内业-激光数据预处理/激光数据预处理', 0, 1, 1, '0', 600.00, '按最低标准');
INSERT INTO `cmc_settle_work` VALUES (410, '1648881415047870256', '内业-激光数据预处理/激光数据预处理', 0, 512, 1, '0', 30720.00, '内业预处理，按实际完成面积');
INSERT INTO `cmc_settle_work` VALUES (411, '1648881415047870096', '地质人员（靳德明）公司承担费用', 0, 1, 1, NULL, 41014.50, '地质人员（靳德明）公司承担费用，已由项目部先行借款支出。');
INSERT INTO `cmc_settle_work` VALUES (412, '1648881415047870096', '二滩、桐子林水电站大坝外部变形观测及谷坡稳定性监测（2020年）', 0, 1, 1, NULL, 1025800.00, '二滩、桐子林两项目委托管理费用总体包干。');
INSERT INTO `cmc_settle_work` VALUES (413, '1648881415047870256', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 42, 1, '0', 16800.00, '激光数据采集，2人21天，10.30-11.19');
INSERT INTO `cmc_settle_work` VALUES (414, '1648881415047870144', '沙牌水电站尾水渠改道工程地形图测绘（内业）', 0, 0.1, 1, NULL, 517.00, '测绘工程中心内业组航测及数字化');
INSERT INTO `cmc_settle_work` VALUES (415, '1648881415047870130', '金汤小学旧址后坡危石地形图测绘', 0, 0.065, 1, NULL, 1300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (416, '1648881415047870130', '磨子沟取水口地形图测绘', 0, 0.005, 1, NULL, 100.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (417, '1648881415047870130', '地形图测绘（内业）', 0, 0.07, 1, NULL, 131.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (418, '1648881415047870130', '控制点（刻石）', 0, 6, 1, NULL, 660.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (419, '1648881415047870130', '进出场', 0, 6, 1, NULL, 1800.00, '夏志军、黄安堂、邓静等3人进出场2天。3*2=6');
INSERT INTO `cmc_settle_work` VALUES (420, '1648881415047870144', '下庄水电站水工建筑物工程地形图测绘（内业）', 0, 0.2, 1, NULL, 1034.00, '地理信息中心航测及数字化');
INSERT INTO `cmc_settle_work` VALUES (421, '1648881415047870144', '尾水渠改道工程地形图测绘（外业）', 0, 0.1, 1, NULL, 879.80, '沙牌水电站，测区通讯、飞行及交通条件较差，增加15％，无人机外业按45％执行');
INSERT INTO `cmc_settle_work` VALUES (422, '1648881415047870144', '水工建筑物工程地形图测绘（外业）', 0, 0.2, 1, NULL, 1759.50, '下庄水电站，测区通讯、飞行及交通条件较差，增加15％，无人机外业按45％执行');
INSERT INTO `cmc_settle_work` VALUES (423, '1648881415047870144', '无人机飞行', 0, 4, 1, NULL, 1440.00, '沙牌、下庄两处');
INSERT INTO `cmc_settle_work` VALUES (424, '1648881415047870144', '进出场', 0, 10, 1, NULL, 3000.00, '参与人员5人');
INSERT INTO `cmc_settle_work` VALUES (425, '1648881415047870117', '两河口水电站工程测量中心2019年度测绘服务', 0, 1, 1, NULL, 690000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (426, '1648881415047870150', '内业-航测/地形图航测', 0, 29.84, 1.5, '0', 33570.00, '因激光数据时效原因，利用无人机航飞修测，按0.4计');
INSERT INTO `cmc_settle_work` VALUES (427, '1648881415047870237', '五等点', 0, 20, 1.25, '0', 4750.00, '平均海拔3700米，增加25%');
INSERT INTO `cmc_settle_work` VALUES (428, '1648881415047870237', '工程区地形图测绘', 0, 22.9, 1, '0', 14198.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (429, '1648881415047870217', 'G4216线屏山新市至金阳段永善支线地形图补测', 0, 0.6, 1, NULL, 495.00, '内业补测');
INSERT INTO `cmc_settle_work` VALUES (430, '1648881415047870237', '施工区地形图测绘', 0, 26.2, 1, '0', 6288.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (431, '1648881415047870237', '淹没区地形图测绘', 0, 29.74, 1, '0', 7137.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (432, '1648881415047870237', '1:2000DOM', 0, 22.9, 1, '0', 3435.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (433, '1648881415047870237', '1:5000DOM', 0, 55.94, 1, '0', 2797.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (434, '1648881415047870237', '1:2000三维地形面', 0, 4.6, 1, '0', 920.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (435, '1648881415047870172', '外业-地形图测绘/地形图外业实测', 0, 0.634, 1.3, '0', 2472.60, '因老航片时效性，现场进行修补测，占比20％');
INSERT INTO `cmc_settle_work` VALUES (436, '1648881415047870172', '内业-航测/地形图航测', 0, 3.17, 1, '0', 2377.50, '地形图成图面积3.17平方（坎娘碱性骨料料场2.3，雪巴滑坡0.87），利用老航片测图');
INSERT INTO `cmc_settle_work` VALUES (437, '1648881415047870172', '内业-编图/地形图数字化', 0, 0.634, 1, '0', 149.00, '参照外业修补测面积结算');
INSERT INTO `cmc_settle_work` VALUES (438, '1648881415047870172', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 4, 1.3, '0', 2600.00, '新增控制点');
INSERT INTO `cmc_settle_work` VALUES (439, '1648881415047870172', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 4, 1.3, '0', 1560.00, '利用旧点');
INSERT INTO `cmc_settle_work` VALUES (440, '1648881415047870172', '外业-高程测量/三角高程测量、单程双测', 0, 12.95, 1.3, '0', 2969.70, '单程双测');
INSERT INTO `cmc_settle_work` VALUES (441, '1648881415047870172', '现场租车', 0, 8, 0, '0', 5600.00, '含油费');
INSERT INTO `cmc_settle_work` VALUES (442, '1648881415047870172', '进出场', 0, 4, 1.3, '0', 1716.00, '2人');
INSERT INTO `cmc_settle_work` VALUES (443, '1648881415047870354', '内业-航测/地形图航测', 0, 0.44, 1.1, '0', 2274.80, '空三增加10％');
INSERT INTO `cmc_settle_work` VALUES (444, '1648881415047870354', '内业-航测/地形图航测', 0, 0.13, 1.1, '0', 257.40, '空三增加10％');
INSERT INTO `cmc_settle_work` VALUES (445, '1648881415047870354', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 7, 1, '0', 1330.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (446, '1648881415047870354', '外业-导线测量/导线测量、四等高程', 0, 19, 1, '0', 6422.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (447, '1648881415047870354', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.44, 1, '0', 3366.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (448, '1648881415047870190', '牙根一级水电站水库淹没区及枢纽工程建设区界桩布置图设计', 0, 1, 1, NULL, 2500.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (449, '1648881415047870354', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.13, 1, '0', 368.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (450, '1648881415047870354', '外业-地形图测绘/地形图外业实测', 0, 1.17, 1, '0', 19890.00, '水下地形测量');
INSERT INTO `cmc_settle_work` VALUES (451, '1648881415047870137', '泸定川藏铁路大桥机载激光扫描', 0, 6, 1, NULL, 2160.00, '3人两天，共计6个人天。');
INSERT INTO `cmc_settle_work` VALUES (452, '1648881415047870354', '外业-地形图测绘/地形图外业实测', 0, 0.09, 1, '0', 567.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (453, '1648881415047870342', '外业-其他/配合测量', 0, 16, 1, '0', 5760.00, '8人*2天');
INSERT INTO `cmc_settle_work` VALUES (454, '1648881415047870343', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 32, 1, '0', 6080.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (455, '1648881415047870343', '高程解算', 0, 1, 1, '0', 1000.00, '自然资源部第三大地测量队解算1985国家高程基准成果');
INSERT INTO `cmc_settle_work` VALUES (456, '1648881415047870343', '外业-地形图测绘/地形图(无人机)测绘', 0, 4.794, 1, '0', 13591.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (457, '1648881415047870343', '内业-航测/地形图航测', 0, 4.794, 1.1, '0', 9492.10, '航测遥感中心完成（空三加密）');
INSERT INTO `cmc_settle_work` VALUES (458, '1648881415047870343', '外业-其他/配合测量', 0, 27, 1, '0', 9720.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (459, '1648881415047870343', '外业-航飞/无人机航飞(飞行项目）', 0, 39, 1, '0', 15600.00, '激光技术部完成');
INSERT INTO `cmc_settle_work` VALUES (460, '1648881415047870354', '外业-断面测量/断面测量', 0, 6, 1, '0', 540.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (461, '1648881415047870091', '数据处理（内业）', 0, 30, 1, NULL, 6300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (462, '1648881415047870091', '空域批文办理', 0, 1, 1, NULL, 35000.00, '委托办理');
INSERT INTO `cmc_settle_work` VALUES (463, '1648881415047870091', '演示视频制作', 0, 1, 1, NULL, 138000.00, '委托制作');
INSERT INTO `cmc_settle_work` VALUES (464, '1648881415047870039', '中桩1255个', 0, 1255, 1, NULL, 40160.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (465, '1648881415047870039', '特征点', 0, 625, 1, NULL, 4000.00, '按参考点计算。');
INSERT INTO `cmc_settle_work` VALUES (466, '1648881415047870039', '边桩点', 0, 1102, 1, NULL, 35264.00, '参照角桩计算。');
INSERT INTO `cmc_settle_work` VALUES (467, '1648881415047870091', '无人机航飞及像控点（外业）', 0, 24, 1, NULL, 8640.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (468, '1648881415047870082', '像控点测量（委外）', 0, 115.6, 1, NULL, 98322.00, '雅砻江3-15段');
INSERT INTO `cmc_settle_work` VALUES (469, '1648881415047870082', '内业测图（委外）', 0, 249.8, 1, NULL, 321894.00, '含部分空三、断面采集');
INSERT INTO `cmc_settle_work` VALUES (470, '1648881415047870082', '断面测量', 0, 401.89, 1, NULL, 146288.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (471, '1648881415047870082', '地形图测绘（外业像控、调绘等）', 0, 123.97, 1, NULL, 200831.40, '金沙江1、2、3、4、7段，雅砻江1、2、19-25段');
INSERT INTO `cmc_settle_work` VALUES (472, '1648881415047870082', '地形图测绘（外业调绘等）', 0, 151.27, 1, NULL, 98023.00, '雅砻江3-18段');
INSERT INTO `cmc_settle_work` VALUES (473, '1648881415047870082', '地形图像控点内业', 0, 35.04, 1, NULL, 8514.70, '地理信息中心，雅砻江16-18段');
INSERT INTO `cmc_settle_work` VALUES (474, '1648881415047870082', '地形图测绘（外业像控、调绘等）', 0, 18.56, 1, NULL, 49610.90, '金沙江5、6段，分公司承担');
INSERT INTO `cmc_settle_work` VALUES (475, '1648881415047870082', '断面测量', 0, 12.92, 1, NULL, 17183.60, '金沙江5、6段，分公司承担');
INSERT INTO `cmc_settle_work` VALUES (476, '1648881415047870082', '地形图测绘（内业）', 0, 43.52, 1, NULL, 32640.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (477, '1648881415047870082', '空三、编绘、入库（内业）', 0, 285, 1, NULL, 209475.00, '编绘、入库按复杂地类编绘计算');
INSERT INTO `cmc_settle_work` VALUES (478, '1648881415047870082', 'DEM、DOM制作（内业）', 0, 285, 1, NULL, 119700.00, '产品满足国标，增加20%');
INSERT INTO `cmc_settle_work` VALUES (479, '1648881415047870082', '外业租船（外业）', 0, 1, 1, NULL, 17220.00, '长江、金沙江下游段');
INSERT INTO `cmc_settle_work` VALUES (480, '1648881415047870082', '资料统筹整理贯标等（内业）', 0, 30, 1, NULL, 6300.00, '航测遥感中心');
INSERT INTO `cmc_settle_work` VALUES (481, '1648881415047870082', '断面内业采集（内业）', 0, 88, 1, NULL, 18480.00, '航测遥感中心');
INSERT INTO `cmc_settle_work` VALUES (482, '1648881415047870082', '委外工作内业检查管理', 0, 40, 1, NULL, 8400.00, '航测遥感中心');
INSERT INTO `cmc_settle_work` VALUES (483, '1648881415047870082', '外业配合甲方检查', 0, 5, 1, NULL, 1800.00, '吴凯、陈伟等');
INSERT INTO `cmc_settle_work` VALUES (484, '1648881415047870082', '委外现场管理（外业）', 0, 33, 1, NULL, 14520.00, '雅砻江上游，杨晶');
INSERT INTO `cmc_settle_work` VALUES (485, '1648881415047870082', '外业进出场', 0, 78, 1, NULL, 23400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (486, '1648881415047870082', '龙泉修改开支', 0, 1, 1, NULL, 5500.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (487, '1648881415047870136', '机载激光数据采集', 0, 1, 1, NULL, 68099.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (488, '1648881415047870082', '断面测量（委外）', 0, 251.2, 1, NULL, 334116.00, '安宁河全部、雅砻江、长江部分、雅上控制');
INSERT INTO `cmc_settle_work` VALUES (489, '1648881415047870042', '汉旺补测地形图', 0, 1.5, 1, NULL, 3150.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (490, '1648881415047870106', '坝区上下游控制网复测（边角网）', 0, 30, 1, NULL, 20910.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (491, '1648881415047870106', '水准测量', 0, 2.82, 1, NULL, 1302.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (492, '1648881415047870106', '仪器租赁费', 0, 1, 1, NULL, 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (493, '1648881415047870106', '项目其他费用', 0, 1, 1, NULL, 6600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (494, '1648881415047870218', '仪器租赁费', 0, 1, 1, NULL, 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (495, '1648881415047870218', '项目其它费用', 0, 1, 1, NULL, 6518.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (496, '1648881415047870141', '尼洛河坝移民安置点地形图测绘', 0, 0.2, 1, NULL, 4000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (497, '1648881415047870141', '菩提河坝移民安置点地形图测绘', 0, 0.1, 1, NULL, 2000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (498, '1648881415047870141', '控制点测量', 0, 6, 1, NULL, 1200.00, '正规五等标石。');
INSERT INTO `cmc_settle_work` VALUES (499, '1648881415047870141', '进出场', 0, 6, 1, NULL, 1800.00, '3人');
INSERT INTO `cmc_settle_work` VALUES (500, '1648881415047870097', '双江口水电站枢纽工程测量技术服务（2020年度）', 0, 1, 1, NULL, 587200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (501, '1648881415047870097', '双江口水电站枢纽工程上下游河道1：1000地形图测绘（变更）', 0, 1, 1, NULL, 47527.00, '按变更结算总价30%计');
INSERT INTO `cmc_settle_work` VALUES (502, '1648881415047870097', '金川水电站库区G248复建公路工程首级施工控制网建设（变更）', 0, 1, 1, NULL, 77548.00, '按变更结算总价40%计');
INSERT INTO `cmc_settle_work` VALUES (503, '1648881415047870138', '地形、布置图数字化', 0, 3, 1, NULL, 630.00, '提交时间按甲方要求分期执行。 建议按人天计费');
INSERT INTO `cmc_settle_work` VALUES (504, '1648881415047870138', '地形、地质图数字化', 0, 4, 1, NULL, 840.00, ' 建议按人天计费');
INSERT INTO `cmc_settle_work` VALUES (505, '1648881415047870105', '地形图测绘', 0, 15, 1, NULL, 5400.00, '1、2、3号景区规划用地');
INSERT INTO `cmc_settle_work` VALUES (506, '1648881415047870105', '控制点测量', 0, 6, 1, NULL, 1200.00, '每处2点，埋石，稳固、利于保存');
INSERT INTO `cmc_settle_work` VALUES (507, '1648881415047870106', '坝区控制网点复测（边角网）', 0, 24, 1, NULL, 18504.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (508, '1648881415047870218', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 31, 1, '1', 14322.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (509, '1648881415047870010', '地形图编绘（内业）', 0, 480.15, 1, NULL, 672210.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (510, '1648881415047870010', 'DEM制作编辑（内业）', 0, 1196, 1, NULL, 239200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (511, '1648881415047870010', '地形图测绘委外质量管理（内业）', 0, 677.31, 1, NULL, 30478.90, '按内部结算标准的5%');
INSERT INTO `cmc_settle_work` VALUES (512, '1648881415047870010', '地形图编绘委外质量管理（内业）', 0, 342.32, 1, NULL, 7188.70, '按内部结算标准的5%');
INSERT INTO `cmc_settle_work` VALUES (513, '1648881415047870010', '地形图调绘（外业）', 0, 822.47, 1, NULL, 1184356.80, '按困难地区');
INSERT INTO `cmc_settle_work` VALUES (514, '1648881415047870070', '河道横断面测量', 0, 5.42, 1, NULL, 3089.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (515, '1648881415047870010', '地形图航测（内业）', 0, 145.16, 1, NULL, 117579.60, '按困难地区');
INSERT INTO `cmc_settle_work` VALUES (516, '1648881415047870070', '断面基点（埋石）', 0, 6, 1, NULL, 540.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (517, '1648881415047870070', '断面基点（刻石）', 0, 5, 1, NULL, 225.00, '沿河堤每条断面布1个');
INSERT INTO `cmc_settle_work` VALUES (518, '1648881415047870070', '地形图测绘（岸上内业）', 0, 5.22, 1, NULL, 9396.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (519, '1648881415047870070', '特征点采集', 0, 6, 1, NULL, 300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (520, '1648881415047870070', '无人机飞行', 0, 1, 1, NULL, 5000.00, '委外（外业支付）');
INSERT INTO `cmc_settle_work` VALUES (521, '1648881415047870070', '进出场', 0, 10, 1, NULL, 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (522, '1648881415047870070', '水下地形图测绘', 0, 0.54, 1, NULL, 3402.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (523, '1648881415047870134', '内业-航测/地形图航测', 0, 1.11, 1.1, '0', 5738.70, '空三增加0.1');
INSERT INTO `cmc_settle_work` VALUES (524, '1648881415047870134', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 4, 1, '0', 760.00, '埋石');
INSERT INTO `cmc_settle_work` VALUES (525, '1648881415047870134', '内业-DEM、地形面/DEM、三维地形面制作', 0, 1.11, 1, '0', 1221.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (526, '1648881415047870134', '外业-其他/进出场', 0, 14, 1, '0', 4200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (527, '1648881415047870134', '外业-航飞/无人机航飞(飞行项目）', 0, 3, 1, '0', 1200.00, '2人*2天');
INSERT INTO `cmc_settle_work` VALUES (528, '1648881415047870149', '外业-断面测量/断面测量', 0, 32.8, 1.3, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (529, '1648881415047870134', '外业-地形图测绘/地形图(无人机)测绘', 0, 1.11, 1, '0', 8491.50, '无人机');
INSERT INTO `cmc_settle_work` VALUES (530, '1648881415047870149', '外业-断面测量/界桩测设', 0, 20, 1.3, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (531, '1648881415047870175', 'GNSS测量', 0, 4, 1, NULL, 380.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (532, '1648881415047870175', '河口变形边坡1:2000地形图测绘（外业）', 0, 1.0003, 1, NULL, 1350.40, '测区位于云南侧，采用无人机航测成图。');
INSERT INTO `cmc_settle_work` VALUES (533, '1648881415047870175', '河口变形边坡1:2000地形图测绘（内业）', 0, 1.0003, 1, NULL, 825.20, '测绘工程中心二部内业组承担');
INSERT INTO `cmc_settle_work` VALUES (534, '1648881415047870175', '进出场', 0, 6, 1, NULL, 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (535, '1648881415047870175', '无人机飞行', 0, 6, 1, NULL, 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (536, '1648881415047870123', '转换点采集（按配合）', 0, 3, 1, NULL, 1080.00, '3人参与（彭永红、李学勇、雷光泽），一天。');
INSERT INTO `cmc_settle_work` VALUES (537, '1648881415047870149', '外业-其他/进出场', 0, 8, 1, '0', 0.00, '吴凯（生产）、郑鹏、王国文、胡鳌4人进出场');
INSERT INTO `cmc_settle_work` VALUES (538, '1648881415047870149', '外业开支', 0, 1, 1, NULL, 25006.00, '含租车13600.00元');
INSERT INTO `cmc_settle_work` VALUES (539, '1648881415047870151', '下庄水电站地形图测绘', 0, 1.3, 1, NULL, 0.00, '委外完成');
INSERT INTO `cmc_settle_work` VALUES (540, '1648881415047870151', '草坡水电站地形图测绘', 0, 0.5, 1, NULL, 0.00, '委外完成');
INSERT INTO `cmc_settle_work` VALUES (541, '1648881415047870151', '控制点测量', 0, 10, 1, NULL, 950.00, '杨振完成');
INSERT INTO `cmc_settle_work` VALUES (542, '1648881415047870151', '现场查勘及项目管理', 0, 6, 1, NULL, 2400.00, '杨振完成');
INSERT INTO `cmc_settle_work` VALUES (543, '1648881415047870147', 'GNSS测量', 0, 4, 1, NULL, 0.00, '委外完成');
INSERT INTO `cmc_settle_work` VALUES (544, '1648881415047870149', '外业-其他/配合测量', 0, 50, 1.5, '1', 30000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (545, '1648881415047870250', '内业-比例尺缩放/地形图比例尺缩放', 0, 4.997, 1, '0', 822.00, '97年地形图数字化。由航测遥感中心完成，原5000水下放大到2000');
INSERT INTO `cmc_settle_work` VALUES (546, '1648881415047870250', '砂石总含量（不含砂石比）计算', 0, 1, 1, '0', 2000.00, '两个时间点的地形叠加测算期间堆积量。地理信息中心完成');
INSERT INTO `cmc_settle_work` VALUES (547, '1648881415047870250', '租船费', 0, 10, 1, '0', 6000.00, '现场租船进行库区水下地形测量');
INSERT INTO `cmc_settle_work` VALUES (548, '1648881415047870147', '地形图测绘', 0, 2.406, 1, NULL, 0.00, '委外完成');
INSERT INTO `cmc_settle_work` VALUES (549, '1648881415047870147', '质量、进度管理及资料整编', 0, 1, 1, NULL, 1000.00, '杨振负责');
INSERT INTO `cmc_settle_work` VALUES (550, '1648881415047870250', '进出场', 0, 10, 1, '0', 0.00, '项目地点云南永善县，参与人员5人');
INSERT INTO `cmc_settle_work` VALUES (551, '1648881415047870250', '外业现场工作', 0, 49, 1.1, '0', 19404.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (552, '1648881415047870250', '库区水下地形图', 0, 3.17, 1, '0', 0.00, '测绘工程中心测量并编辑');
INSERT INTO `cmc_settle_work` VALUES (553, '1648881415047870185', '测量中心服务', 0, 1, 1, NULL, 477200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (554, '1648881415047870233', 'ML项目结算', 0, 1, 1, '0', 1937835.23, '结算明细见附件。');
INSERT INTO `cmc_settle_work` VALUES (555, '1648881415047870104', '左岸泄洪雾化区1:1000 DOM制作', 0, 1.87, 1, NULL, 561.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (556, '1648881415047870084', '机载激光扫描（外业）', 0, 1, 1, NULL, 110320.00, '按项目核定总体委托费用结算');
INSERT INTO `cmc_settle_work` VALUES (557, '1648881415047870084', '国内隔离观察（外业）', 0, 28, 1, NULL, 16800.00, '预算外费用。由昆明防疫部门统一安排隔离，食宿费用高。');
INSERT INTO `cmc_settle_work` VALUES (558, '1648881415047870084', '库区地形图测绘（内业）', 0, 59.53, 1, NULL, 39170.70, '激光数据');
INSERT INTO `cmc_settle_work` VALUES (559, '1648881415047870084', '库区DOM制作（内业）', 0, 59.53, 1, NULL, 8929.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (560, '1648881415047870084', '枢纽区地形图测绘（内业）', 0, 2.47, 1, NULL, 7256.90, '激光数据');
INSERT INTO `cmc_settle_work` VALUES (561, '1648881415047870084', '甲方提供断面点、水边点检查及图面修改（内业）', 0, 14, 1, NULL, 2940.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (562, '1648881415047870093', '外观监测', 0, 12, 1, NULL, 36000.00, '项目包干费用');
INSERT INTO `cmc_settle_work` VALUES (563, '1648881415047870071', '地形图测绘', 0, 4, 1, NULL, 1440.00, '面积0.025 km²，按配合结算。');
INSERT INTO `cmc_settle_work` VALUES (564, '1648881415047870071', '进出场', 0, 8, 1, NULL, 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (565, '1648881415047870086', '枢纽区三维地形面制作', 0, 1.1, 1, NULL, 1210.00, '由新图制作完成，交技术质量部提交资料。');
INSERT INTO `cmc_settle_work` VALUES (566, '1648881415047870239', '库区垫高防护工程1:1000地形图测绘', 0, 0.87, 1, '0', 1026.60, '激光成图');
INSERT INTO `cmc_settle_work` VALUES (567, '1648881415047870239', '库区垫高防护工程1:1000地形图测绘', 0, 0.15, 1.1, '0', 297.00, '航测成图');
INSERT INTO `cmc_settle_work` VALUES (568, '1648881415047870083', '平面点选点和造埋（墩标）', 0, 1, 1, NULL, 2000.00, '困难地区，海拔2900m');
INSERT INTO `cmc_settle_work` VALUES (569, '1648881415047870083', '二等粉刷、喷字（全部点）', 0, 1, 1, NULL, 6000.00, '坝区及厂房区全部二等网点的翻新、维护、粉刷、喷字等');
INSERT INTO `cmc_settle_work` VALUES (570, '1648881415047870083', '平面点选点和造埋（地面标）', 0, 14, 1, NULL, 4200.00, '困难地区，海拔2900m');
INSERT INTO `cmc_settle_work` VALUES (571, '1648881415047870083', '基本水准标石选点和造埋', 0, 6, 1, NULL, 4800.00, '点的尺寸、深度大于普通水准点');
INSERT INTO `cmc_settle_work` VALUES (572, '1648881415047870083', '普通水准标石选点和造埋', 0, 13, 1, NULL, 2600.00, '困难地区，海拔2900m');
INSERT INTO `cmc_settle_work` VALUES (573, '1648881415047870083', 'GNSS测量', 0, 22, 1, NULL, 13772.00, '增加一倍观测时间的，费用增加 30%。（利用旧点按60%）');
INSERT INTO `cmc_settle_work` VALUES (574, '1648881415047870083', '边角网测量', 0, 16, 1, NULL, 12336.00, '边角网增加 60%');
INSERT INTO `cmc_settle_work` VALUES (575, '1648881415047870083', '边角网测量', 0, 38, 1, NULL, 26486.00, '边角网增加 60%');
INSERT INTO `cmc_settle_work` VALUES (576, '1648881415047870083', '光电测距三角高程', 0, 43, 1, NULL, 6966.00, '边角网观测中已包含');
INSERT INTO `cmc_settle_work` VALUES (577, '1648881415047870083', '水准测量', 0, 76, 1, NULL, 35112.00, '困难地区，海拔2900m');
INSERT INTO `cmc_settle_work` VALUES (578, '1648881415047870083', '现场验收', 0, 1, 1, NULL, 400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (579, '1648881415047870083', '进出场', 0, 20, 1, NULL, 6000.00, '3次进出场。');
INSERT INTO `cmc_settle_work` VALUES (580, '1648881415047870104', '淹没区勘界图CGCS2000坐标转换', 0, 16, 1, NULL, 240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (581, '1648881415047870104', '水库影响区CGCS2000坐标转换', 0, 16, 1, NULL, 240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (582, '1648881415047870104', '枢纽工程CGCS2000坐标转换', 0, 16, 1, NULL, 240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (583, '1648881415047870104', '移民工程CGCS2000坐标转换', 0, 16, 1, NULL, 240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (584, '1648881415047870066', '1期-河道断面测量', 0, 8.15, 1, NULL, 8639.00, '水毁区域，按困难地区标准');
INSERT INTO `cmc_settle_work` VALUES (585, '1648881415047870066', '1期-地形图航测（委外）', 0, 1.9, 1, NULL, 3800.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (586, '1648881415047870066', '1期-地形图数字化', 0, 2.01, 1, NULL, 796.00, '委外数据由测绘工程中心内业组数字化');
INSERT INTO `cmc_settle_work` VALUES (587, '1648881415047870066', '1期-无人机飞行', 0, 8, 1, NULL, 2880.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (588, '1648881415047870066', '1期-现场配合测量', 0, 9, 1, NULL, 3240.00, '现场复核地形图及断面');
INSERT INTO `cmc_settle_work` VALUES (589, '1648881415047870066', '1期-进出场', 0, 16, 1, NULL, 4800.00, '飞行及外业共8人');
INSERT INTO `cmc_settle_work` VALUES (590, '1648881415047870066', '2期-地形图测绘（外业）', 0, 0.68, 1, NULL, 2325.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (591, '1648881415047870066', '2期-河道横断面测量', 0, 6.42, 1, NULL, 6805.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (592, '1648881415047870066', '2期-地形图测量（内业）', 0, 0.68, 1, NULL, 1346.40, '地理信息中心测图，测绘工程中心内业主编辑');
INSERT INTO `cmc_settle_work` VALUES (593, '1648881415047870066', '2期-无人机飞行', 0, 14, 1, NULL, 5040.00, '7处');
INSERT INTO `cmc_settle_work` VALUES (594, '1648881415047870066', '2期-进出场', 0, 10, 1, NULL, 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (595, '1648881415047870104', '环保工程CGCS2000坐标转换', 0, 16, 1, NULL, 240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (596, '1648881415047870068', '地形图测绘（人工外业）', 0, 0.01, 1, NULL, 200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (597, '1648881415047870068', '进出场', 0, 6, 1, NULL, 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (598, '1648881415047870066', '1期-地形图测绘（外业）', 0, 2.01, 1, NULL, 6874.20, '带状、分散，按困难地区标准');
INSERT INTO `cmc_settle_work` VALUES (599, '1648881415047870086', '枢纽区三维地形面制作', 0, 1.1, 1, NULL, 495.00, '由老图制作完成，交技术质量部提交资料。');
INSERT INTO `cmc_settle_work` VALUES (600, '1648881415047870239', '供水水源雅嘎措1:1000地形图测绘', 0, 0.15, 1, '0', 177.00, '激光成图');
INSERT INTO `cmc_settle_work` VALUES (601, '1648881415047870239', '廖绍毅现场管理委外', 0, 6, 1.25, '0', 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (602, '1648881415047870304', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '作业组3人，进出场一次。');
INSERT INTO `cmc_settle_work` VALUES (603, '1648881415047870304', '外业-航飞/无人机航飞(飞行项目）', 0, 3, 1, '0', 1200.00, '测区海拔2900m，增加10%');
INSERT INTO `cmc_settle_work` VALUES (604, '1648881415047870304', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.541, 1.25, '0', 1917.20, '像控点检查点测量，调绘，测区海拔2900m，增加10%，宽度图上距离7cm，为带状图，增加15%');
INSERT INTO `cmc_settle_work` VALUES (605, '1648881415047870304', '内业-航测/地形图航测', 0, 0.541, 1.15, '0', 1119.90, '宽度图上距离7cm，为带状图，增加15%');
INSERT INTO `cmc_settle_work` VALUES (606, '1648881415047870109', '进出场', 0, 10, 1, NULL, 4950.00, '高程系数1.5');
INSERT INTO `cmc_settle_work` VALUES (607, '1648881415047870109', '仪器托运费', 0, 1, 1, NULL, 879.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (608, '1648881415047870109', '机票', 0, 1, 1, NULL, 5736.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (609, '1648881415047870109', '现场租车', 0, 1, 1, NULL, 8320.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (610, '1648881415047870110', '地形图测绘（外业）', 0, 1.3, 1, NULL, 9945.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (611, '1648881415047870110', '空三加密', 0, 1.3, 1, NULL, 611.00, '航测遥感中心加密，按结算单价10％');
INSERT INTO `cmc_settle_work` VALUES (612, '1648881415047870110', '地形图测绘（内业）', 0, 1.3, 1, NULL, 5850.00, '委外,按合同支付');
INSERT INTO `cmc_settle_work` VALUES (613, '1648881415047870110', '地形图测绘（数字化）', 0, 1.3, 1, NULL, 2444.00, '测绘工程中心');
INSERT INTO `cmc_settle_work` VALUES (614, '1648881415047870110', '实景三维模型制作', 0, 1.3, 1, NULL, 1222.00, '地理信息中心制作');
INSERT INTO `cmc_settle_work` VALUES (615, '1648881415047870110', '正射影像图', 0, 1.3, 1, NULL, 829.40, '按业主要求新增工作');
INSERT INTO `cmc_settle_work` VALUES (616, '1648881415047870110', '坐标换换', 0, 1, 1, NULL, 400.00, '到重庆转换坐标，按省外一天配合');
INSERT INTO `cmc_settle_work` VALUES (617, '1648881415047870110', '无人机飞行', 0, 2, 1, NULL, 720.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (618, '1648881415047870110', '进出场', 0, 8, 1, NULL, 2640.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (619, '1648881415047870266', '内业-激光数据预处理/激光数据预处理', 0, 67.56, 1, '0', 4053.60, '按采集比例尺，激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (620, '1648881415047870266', '内业-激光制图/激光数据制作地形图', 0, 67.56, 1, '0', 16214.40, '其中航测遥感中心完成15.79平方公里。');
INSERT INTO `cmc_settle_work` VALUES (621, '1648881415047870266', '内业-激光制图/激光数据制作地形图', 0, 3.68, 1, '0', 2281.60, '激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (622, '1648881415047870111', '地形地类图测绘补测（外业）', 0, 0.032, 1, NULL, 832.00, '实地地形变化大，按实测结算');
INSERT INTO `cmc_settle_work` VALUES (623, '1648881415047870111', '进出场（外业）', 0, 6, 1, NULL, 1980.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (624, '1648881415047870111', '地形地类图测绘补测（内业）', 0, 0.032, 1, NULL, 163.20, '按机载激光成图及地形地类图编绘结算');
INSERT INTO `cmc_settle_work` VALUES (625, '1648881415047870112', '地形图补测', 0, 1.02, 1, NULL, 671.20, '利用机载激光数据');
INSERT INTO `cmc_settle_work` VALUES (626, '1648881415047870113', '水下地形图测绘 (外业）', 0, 1.33, 1, NULL, 10892.70, NULL);
INSERT INTO `cmc_settle_work` VALUES (627, '1648881415047870113', '进出场（外业）', 0, 6, 1, NULL, 1800.00, '含2019C19项目。');
INSERT INTO `cmc_settle_work` VALUES (628, '1648881415047870113', '河道横断面测量 （外业）', 0, 9, 1, NULL, 1260.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (629, '1648881415047870113', '地形图编辑（内业）', 0, 1.33, 1, NULL, 877.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (630, '1648881415047870062', '脚木足集镇征地红线测量', 0, 7, 1, NULL, 2800.00, '工作量按移民专业现场要求为准');
INSERT INTO `cmc_settle_work` VALUES (631, '1648881415047870062', '孔龙垫高防护区地形图（外业）', 0, 0.47, 1, NULL, 714.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (632, '1648881415047870062', '孔龙垫高防护区地形图（内业）', 0, 0.47, 1, NULL, 589.90, NULL);
INSERT INTO `cmc_settle_work` VALUES (633, '1648881415047870062', '马尔康硅厂鞋楦厂移民点钻孔坐标放样', 0, 17, 1, NULL, 1360.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (634, '1648881415047870063', '双江口测量中心2019年变更测量', 0, 1, 1, NULL, 307170.00, '施工控制网变更复测及其他变更测量');
INSERT INTO `cmc_settle_work` VALUES (635, '1648881415047870064', '填筑量或开挖量测量', 0, 7.71, 1, NULL, 49729.50, '变更项目，按合同额30%结算');
INSERT INTO `cmc_settle_work` VALUES (636, '1648881415047870065', '地形图测绘', 0, 0.45, 1, NULL, 564.80, '利用已有机载激光数据成图');
INSERT INTO `cmc_settle_work` VALUES (637, '1648881415047870266', '测区模型转换费用', 0, 2, 1, NULL, 1000.00, '因在现场范围有变化，导致转换两次高程模型。');
INSERT INTO `cmc_settle_work` VALUES (638, '1648881415047870266', '租车', 0, 2, 1, NULL, 1600.00, '分别于12月13日和12月20日现场租车进作业');
INSERT INTO `cmc_settle_work` VALUES (639, '1648881415047870247', '输水线路及发电厂房1:5000地形图测量', 0, 7.64, 1, '0', 1833.60, '航测遥感中心');
INSERT INTO `cmc_settle_work` VALUES (640, '1648881415047870251', '内业-激光数据预处理/激光数据预处理', 0, 34, 1, '0', 2040.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (641, '1648881415047870251', '外业-地形图测绘/地形图(激光)测绘', 0, 26.36, 1, '1', 18979.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (642, '1648881415047870251', '外业-地形图测绘/地形图(激光)测绘', 0, 24, 1, '1', 9600.00, '因业主调绘要求变化导致第二次进场，补测调绘，按工天，3人8天。');
INSERT INTO `cmc_settle_work` VALUES (643, '1648881415047870251', '内业-DOM/DOM制作', 0, 26.36, 1, '1', 4481.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (644, '1648881415047870251', '外协管理费', 0, 1, 1, '1', 2920.00, '按合同额1%，监管外协产品质量');
INSERT INTO `cmc_settle_work` VALUES (645, '1648881415047870179', '界桩（加密桩）制作', 0, 668, 1, NULL, 56780.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (646, '1648881415047870179', '水位牌建设', 0, 4, 1, NULL, 40000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (647, '1648881415047870179', '民工费', 0, 140, 1, NULL, 32200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (648, '1648881415047870179', '界桩（永久桩）制作', 0, 31, 1, NULL, 2945.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (649, '1648881415047870179', '青苗费', 0, 700, 1, NULL, 35000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (650, '1648881415047870179', '界桩测设', 0, 703, 1, NULL, 77330.00, '公司员工补贴');
INSERT INTO `cmc_settle_work` VALUES (651, '1648881415047870179', '配合调查', 0, 21, 1, NULL, 7560.00, '现场配合测量');
INSERT INTO `cmc_settle_work` VALUES (652, '1648881415047870179', 'GNSS测量', 0, 14, 1, NULL, 9100.00, '高程用CORS');
INSERT INTO `cmc_settle_work` VALUES (653, '1648881415047870179', '红线图布置及报告编写', 0, 9, 1, NULL, 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (654, '1648881415047870179', '其他', 0, 20, 1, NULL, 7200.00, '现场民工联系、工作协调等');
INSERT INTO `cmc_settle_work` VALUES (655, '1648881415047870159', '引水线路地形图测绘（外业）', 0, 7.642, 1.2, '0', 3301.30, '采用卫片测图');
INSERT INTO `cmc_settle_work` VALUES (656, '1648881415047870159', '引水线路地形图测绘（内业）', 0, 7.642, 1, '0', 1849.40, '采用卫片测图，航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (657, '1648881415047870159', '坝址区、厂址区水下地形图测绘', 0, 0.196, 1.2, '0', 3998.40, '测绘工程中心测量并编辑');
INSERT INTO `cmc_settle_work` VALUES (658, '1648881415047870167', '3#渣场地形图测绘（外业）', 0, 1.52, 1.05, '0', 4524.70, '利用已有激光数据，无人机航摄修补测。');
INSERT INTO `cmc_settle_work` VALUES (659, '1648881415047870167', '3#渣场地形图测绘（内业）', 0, 1.52, 1, '0', 3009.60, '航测遥感中心完成，空三增加0.1');
INSERT INTO `cmc_settle_work` VALUES (660, '1648881415047870167', '3#水下地形图测绘', 0, 0.13, 1.05, '0', 860.00, '测绘工程中心测量并编辑');
INSERT INTO `cmc_settle_work` VALUES (661, '1648881415047870159', '紫霞库区横断面测量', 0, 26.329, 1.3, '0', 19509.80, '40条');
INSERT INTO `cmc_settle_work` VALUES (662, '1648881415047870182', '移民安置点断面测量及钻孔放样', 0, 16, 1, '1', 6400.00, '配合测量。（补充变更内容）');
INSERT INTO `cmc_settle_work` VALUES (663, '1648881415047870159', '断面基点测量', 0, 40, 1.2, '0', 4320.00, '单基点');
INSERT INTO `cmc_settle_work` VALUES (664, '1648881415047870182', '地形图数字化(内业)', 0, 1, 1, '1', 200.00, '内业由航测遥感中心承担，单个项目按标准结算不足200元时，按200元结算；');
INSERT INTO `cmc_settle_work` VALUES (665, '1648881415047870182', '双江口激光点云分类(内业)', 0, 2.56, 1, '0', 1536.00, '内业由航测遥感中心承担，吴振负责。项目管理部安排测试工作。');
INSERT INTO `cmc_settle_work` VALUES (666, '1648881415047870159', '紫霞库区纵断面测量', 0, 23.645, 1.2, '0', 9703.90, '按横断面标准的0.6计算');
INSERT INTO `cmc_settle_work` VALUES (667, '1648881415047870159', '地形图测绘（内业）', 0, 3.867, 1, '0', 2397.50, '激光点云方式成图。航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (668, '1648881415047870159', '飞行及地面配合', 0, 20, 1.2, '0', 9600.00, '飞行组王刚1人13天（含拿批文、中途等待办理手续），配合飞行7人.天（设备组装、基站架设等）');
INSERT INTO `cmc_settle_work` VALUES (669, '1648881415047870159', '现场租车', 0, 1, 1, '0', 24635.00, '租车21天，单价1000、油费合计3365');
INSERT INTO `cmc_settle_work` VALUES (670, '1648881415047870159', '进出场', 0, 18, 1, '0', 5940.00, '赵洪、王刚、杨为康3人，进出场各3天');
INSERT INTO `cmc_settle_work` VALUES (671, '1648881415047870251', '外业-其他/进出场', 0, 14, 1, '1', 4620.00, '第一次进出场4人，第二次3人');
INSERT INTO `cmc_settle_work` VALUES (672, '1648881415047870182', '双柏树地形图补测（外业）', 0, 0.236, 1, '1', 1793.60, '常规测量。');
INSERT INTO `cmc_settle_work` VALUES (673, '1648881415047870251', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 24, 1.2, '1', 11520.00, '测区平均高差300-500米，三人八天');
INSERT INTO `cmc_settle_work` VALUES (674, '1648881415047870167', '依生沟渣场地形图测绘（外业）', 0, 1.23, 1.05, '0', 3661.40, '新增，无人机摄影');
INSERT INTO `cmc_settle_work` VALUES (675, '1648881415047870167', '依生沟渣场地形图测绘（内业）', 0, 1.23, 1, '0', 2435.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (676, '1648881415047870167', '无人机飞行', 0, 2, 1, '0', 800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (677, '1648881415047870167', '进出场', 0, 4, 1, '0', 1200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (678, '1648881415047870168', '库区新增影响区大堡地形图补测（内业）', 0, 0.34, 1, '0', 400.00, '内业单个项目不足400按400元结算。');
INSERT INTO `cmc_settle_work` VALUES (679, '1648881415047870168', '横断面测量', 0, 5.58, 1, '0', 3906.00, '11条');
INSERT INTO `cmc_settle_work` VALUES (680, '1648881415047870168', '控制点测量', 0, 4, 1, '0', 532.00, '按要求布设');
INSERT INTO `cmc_settle_work` VALUES (681, '1648881415047870168', '现场配合测量', 0, 2, 1, '0', 720.00, '配合地质现场测点');
INSERT INTO `cmc_settle_work` VALUES (682, '1648881415047870165', '金川水电站工程测量技术服务（2020年度）', 0, 1, 1, NULL, 465000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (683, '1648881415047870168', '无人机飞行', 0, 2, 1, '0', 720.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (684, '1648881415047870168', '进出场', 0, 6, 1, '0', 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (685, '1648881415047870369', '同时水边线测量（委外）', 0, 4.75, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (686, '1648881415047870369', '断面基点（委外）', 0, 34, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (687, '1648881415047870168', '库区新增影响区大堡地形图补测（外业）', 0, 0.34, 1, '0', 459.00, '无人机低空摄影');
INSERT INTO `cmc_settle_work` VALUES (688, '1648881415047870220', 'GNSS测量', 0, 46, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (689, '1648881415047870220', 'GNSS测量', 0, 40, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (690, '1648881415047870220', '水准测量', 0, 220, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (691, '1648881415047870220', '护岸地形图测绘', 0, 12.77, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (692, '1648881415047870220', '护岸水下地形图测绘', 0, 3.19, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (693, '1648881415047870220', '大断面测量', 0, 100, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (694, '1648881415047870220', '大断面基点测量', 0, 200, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (695, '1648881415047870220', '河道断面测量', 0, 25.34, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (696, '1648881415047870220', '河道断面基点测量', 0, 362, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (697, '1648881415047870220', '1:200水下断面测量', 0, 17.6, 1, '0', 5596.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (698, '1648881415047870369', '内业-航测/地形图航测', 0, 0.29, 1, '0', 522.00, '邓家桥地形图测绘，航测遥感中心航测成图');
INSERT INTO `cmc_settle_work` VALUES (699, '1648881415047870369', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.29, 1, '0', 822.10, '邓家桥地形图测绘，双江口测量中心完成航飞及外业工作');
INSERT INTO `cmc_settle_work` VALUES (700, '1648881415047870135', '新联土料场复垦1:1000地形图测绘', 0, 0.8, 1, NULL, 2736.00, '无人机按45%计算');
INSERT INTO `cmc_settle_work` VALUES (701, '1648881415047870135', '新联料场生产用水外部引水工程1:1000地形图测绘', 0, 1.52, 1, NULL, 5198.40, '无人机按45%计算，先后进出场三次补测');
INSERT INTO `cmc_settle_work` VALUES (702, '1648881415047870135', '三角高程测量', 0, 28.5, 1, NULL, 4189.50, '代替四等三角高程增加 30%');
INSERT INTO `cmc_settle_work` VALUES (703, '1648881415047870135', '地形图测绘内业', 0, 2.32, 1, NULL, 4593.60, '内业');
INSERT INTO `cmc_settle_work` VALUES (704, '1648881415047870135', '进出场', 0, 12, 1, NULL, 3600.00, '甲方先后3次提出补测，本部门按照公司要求先后3次进出场补测');
INSERT INTO `cmc_settle_work` VALUES (705, '1648881415047870369', '外业-其他/配合测量', 0, 3, 1, '0', 1080.00, '郑鹏现场同委外单位一起开展工作');
INSERT INTO `cmc_settle_work` VALUES (706, '1648881415047870210', '内业-DEM、地形面/DEM、三维地形面制作', 0, 15.25, 1, '0', 3050.00, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (707, '1648881415047870369', '报告编写及归档', 0, 1, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (708, '1648881415047870369', '委外管理', 0, 1, 1, '0', 1000.00, '郑鹏现场质量检查及管理');
INSERT INTO `cmc_settle_work` VALUES (709, '1648881415047870369', '外业-其他/进出场', 0, 2, 1, '0', 600.00, '郑鹏1人进出场');
INSERT INTO `cmc_settle_work` VALUES (710, '1648881415047870237', '外业-航飞/无人机航飞(飞行项目）', 0, 9, 1.25, '0', 4050.00, '平均海拔3700米，增加25%');
INSERT INTO `cmc_settle_work` VALUES (711, '1648881415047870243', '雅砻江桐子林水电站大坝外部变形和近坝区滑坡体观测（2022年）', 0, 1, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (712, '1648881415047870237', '外业-地形图调绘 检查点', 0, 55.9, 0.225, '0', 11319.80, '平均海拔3700米，增加25%');
INSERT INTO `cmc_settle_work` VALUES (713, '1648881415047870237', '外业-调绘 检查点', 0, 22.9, 0.225, '0', 15457.50, '平均海拔3700米，增加25%');
INSERT INTO `cmc_settle_work` VALUES (714, '1648881415047870237', '外业-其他/进出场', 0, 16, 1, '0', 4800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (715, '1648881415047870220', '1:2000水下断面测量', 0, 5.1, 1, '0', 397.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (716, '1648881415047870220', '1:2000水下地形图测绘', 0, 0.4, 1, '0', 2880.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (717, '1648881415047870220', '1:200断面测量', 0, 15, 1, '0', 2640.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (718, '1648881415047870369', '断面测量（委外）', 0, 4.02, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (719, '1648881415047870237', '1:2000点云解算预处理', 0, 51.74, 1, '0', 3104.40, '按1:2000采集');
INSERT INTO `cmc_settle_work` VALUES (720, '1648881415047870448', '地形图测绘', 0, NULL, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (721, '1648881415047870448', 'GNSS测量', 0, NULL, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (722, '1648881415047870257', '取水口地形图测绘', 0, 0.053, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (723, '1648881415047870257', '引水线路地形图测绘', 0, 0.368, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (724, '1648881415047870257', '料场地形图测绘', 0, 0.651, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (725, '1648881415047870257', '三等GNSS测量', 0, 6, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (726, '1648881415047870257', '三角高程测量', 0, 11.13, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (727, '1648881415047870257', '地形图数字化', 0, 2.46, 1, '0', 974.20, '委外地形图的数字化杨为康完成');
INSERT INTO `cmc_settle_work` VALUES (728, '1648881415047870257', '地形图数字化', 0, 0.053, 1, '0', 59.80, '委外地形图的数字化杨为康完成');
INSERT INTO `cmc_settle_work` VALUES (729, '1648881415047870257', '资料计算', 0, 2.5, 1, '0', 525.00, '委外控制测量计算杨为康完成');
INSERT INTO `cmc_settle_work` VALUES (730, '1648881415047870257', '项目管理及报告编写', 0, 10, 1, '0', 2100.00, '委外项目管理及资料汇编归档杨为康完成');
INSERT INTO `cmc_settle_work` VALUES (731, '1648881415047870235', '内业-航测/地形图航测', 0, 36.9, 1, '0', 30442.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (732, '1648881415047870235', '内业-DOM/DOM制作', 0, 33.972, 1, '0', 5095.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (733, '1648881415047870235', '内业-DEM、地形面/DEM、三维地形面制作', 0, 33.972, 1, '0', 6794.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (734, '1648881415047870235', '外业-断面测量/断面测量', 0, 124.53, 1, '0', 27396.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (735, '1648881415047870235', '外业-断面测量/断面测量', 0, 2.18, 1, '1', 959.20, '水下增加100%');
INSERT INTO `cmc_settle_work` VALUES (736, '1648881415047870235', '数据入库', 0, 32.453, 1, NULL, 8924.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (737, '1648881415047870228', '内业-DEM、地形面/DEM、三维地形面制作', 0, 330.61, 1, '0', 9918.30, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (738, '1648881415047870228', '外业-断面测量/断面测量', 0, 17.331, 1.15, '1', 5182.00, '横断面测量');
INSERT INTO `cmc_settle_work` VALUES (739, '1648881415047870228', '外业-断面测量/断面测量', 0, 8, 1.15, '1', 920.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (740, '1648881415047870228', '外业-断面测量/断面测量', 0, 3.796, 1.15, '1', 1135.00, '纵断面、同时水边线测量');
INSERT INTO `cmc_settle_work` VALUES (741, '1648881415047870228', '涉河建筑坐标测量及相片采集', 0, 42, 1.15, '1', 966.00, '参照公路中桩单价');
INSERT INTO `cmc_settle_work` VALUES (742, '1648881415047870228', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 39, 0.7, '1', 3276.00, '利用SCCORS采集原金沙江流域规划GNSS点。');
INSERT INTO `cmc_settle_work` VALUES (743, '1648881415047870228', '外业-其他/进出场', 0, 18, 1, '1', 5940.00, '3人*6天');
INSERT INTO `cmc_settle_work` VALUES (744, '1648881415047870142', '外业-地形图测绘/地形图外业实测', 0, 0.1, 1.5, '1', 1140.00, '实测。波罗坝区。');
INSERT INTO `cmc_settle_work` VALUES (745, '1648881415047870142', '内业-DEM、地形面/DEM、三维地形面制作', 0, 0.3, 2, '0', 270.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (746, '1648881415047870142', '内业-编图/地形图数字化', 0, 0.3, 1, '0', 198.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (747, '1648881415047870142', '测量水下地形租船', 0, 1, 1, '1', 1000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (748, '1648881415047870142', '内业-航测/地形图航测', 0, 0.45, 1, '0', 810.00, '白格堰塞体左右岸地形更新补测（内业）');
INSERT INTO `cmc_settle_work` VALUES (749, '1648881415047870142', '外业误工', 0, 8, 1, '1', 3200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (750, '1648881415047870155', '正射影像图DOM制作', 0, 0.53, 1, '0', 95.40, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (751, '1648881415047870155', '无人机飞行', 0, 3, 1, '0', 1200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (752, '1648881415047870155', '进出场', 0, 6, 1, '0', 1980.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (753, '1648881415047870155', '地形图测绘内业', 0, 0.53, 1, '0', 1049.40, '空山增加0.1，航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (754, '1648881415047870142', '外业-地形图测绘/地形图外业实测', 0, 0.2, 1.5, '1', 2280.00, '实测。白格堰塞体。');
INSERT INTO `cmc_settle_work` VALUES (755, '1648881415047870181', '经营奖励3%', 0, 1, 1, '0', 2989.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (756, '1648881415047870230', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 33, 1.2, '0', 15840.00, '朱倪强，万龙卿，熊艳华三人11天（4.3-4.13），测区平均高程1800米');
INSERT INTO `cmc_settle_work` VALUES (757, '1648881415047870230', '内业-激光数据预处理/激光数据预处理', 0, 19.84, 1, '0', 3571.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (758, '1648881415047870133', '竹马河地形图测绘（内业）', 0, 0.063, 1, NULL, 29.50, '外业实测，面积太小，按困难地类，测绘工程中心内业组完成');
INSERT INTO `cmc_settle_work` VALUES (759, '1648881415047870133', '图根控制点', 0, 4, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (760, '1648881415047870133', '进出场', 0, 8, 1, NULL, 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (761, '1648881415047870133', '竹马河地形图测绘（外业实测）', 0, 0.063, 1, NULL, 478.80, '外业实测，面积太小，按困难地类');
INSERT INTO `cmc_settle_work` VALUES (762, '1648881415047870156', '二等GNSS观测', 0, 13, 1, '0', 9490.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (763, '1648881415047870156', '三角网观测', 0, 5, 1, '0', 3285.00, '三角观测执行GNSS对应等级标准');
INSERT INTO `cmc_settle_work` VALUES (764, '1648881415047870156', '水准测量', 0, 27.199, 1, '0', 11423.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (765, '1648881415047870156', '跨河水准测量', 0, 2, 1, '0', 3460.00, '跨河距离小于500米，按一般地类');
INSERT INTO `cmc_settle_work` VALUES (766, '1648881415047870156', '光电测距三角高程', 0, 15.354, 1, '0', 2257.00, '执行导线测量对应标准');
INSERT INTO `cmc_settle_work` VALUES (767, '1648881415047870156', '现场租车', 0, 18, 1, '0', 10800.00, '含油费，埋桩期间租车12天、观测期间租车6天');
INSERT INTO `cmc_settle_work` VALUES (768, '1648881415047870156', '进出场', 0, 16, 1, '0', 5280.00, '埋桩2人进出场，观测6人进出场');
INSERT INTO `cmc_settle_work` VALUES (769, '1648881415047870235', '界桩、界牌及告示牌放样安装', 0, 409, 1, NULL, 44990.00, '实体界桩366个，界牌18个，告示牌25个');
INSERT INTO `cmc_settle_work` VALUES (770, '1648881415047870448', '特征点放样', 0, NULL, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (771, '1648881415047870448', '土方量计算', 0, NULL, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (772, '1648881415047870448', '土方平衡报告', 0, 2, 1, '0', 420.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (773, '1648881415047870448', '管理费', 0, 2, 1, '0', 420.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (774, '1648881415047870335', 'GNSS测量', 0, NULL, 1, NULL, NULL, '外委项目');
INSERT INTO `cmc_settle_work` VALUES (775, '1648881415047870178', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 147, 1.35, '0', 99225.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (776, '1648881415047870178', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 8, 1.35, '0', 4730.40, '联测国家点8个');
INSERT INTO `cmc_settle_work` VALUES (777, '1648881415047870178', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 6, 1.35, '0', 2430.00, '联测国家点6个');
INSERT INTO `cmc_settle_work` VALUES (778, '1648881415047870178', '外业-高程测量/水准测量', 0, 121.5, 1.35, '0', 29524.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (779, '1648881415047870178', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 30, 1.35, '0', 29565.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (780, '1648881415047870178', '外业-高程测量/三角高程测量', 0, 33.659, 1.35, '0', 5725.40, '附和线路');
INSERT INTO `cmc_settle_work` VALUES (781, '1648881415047870178', '外业-高程测量/三角高程测量、单程双测', 0, 320.982, 1.35, '0', 76438.70, '单程双测');
INSERT INTO `cmc_settle_work` VALUES (782, '1648881415047870178', '河道横断面测量', 0, 95.179, 0.7, '0', 14657.60, '119条，航测遥感中心完成，内外业结合，按0.7');
INSERT INTO `cmc_settle_work` VALUES (783, '1648881415047870178', '河道横断面测量', 0, 195.049, 0.7, '0', 25941.50, '300条，航测遥感中心完成，内外业结合，按0.7');
INSERT INTO `cmc_settle_work` VALUES (784, '1648881415047870335', '五等导线测量', 0, NULL, 1, NULL, NULL, '外委项目');
INSERT INTO `cmc_settle_work` VALUES (785, '1648881415047870335', '三等高程测量', 0, NULL, 1, NULL, NULL, '外委项目');
INSERT INTO `cmc_settle_work` VALUES (786, '1648881415047870335', '界桩放样与测量', 0, NULL, 1, NULL, NULL, '外委项目');
INSERT INTO `cmc_settle_work` VALUES (787, '1648881415047870235', '界桩、界牌及告示牌放样安装', 0, 7, 1, NULL, 385.00, '7个电子桩');
INSERT INTO `cmc_settle_work` VALUES (788, '1648881415047870235', '告示牌制作', 0, 25, 1, NULL, 25000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (789, '1648881415047870235', '混凝土界桩模具', 0, 40, 1, NULL, 16000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (790, '1648881415047870235', '混凝土界桩预制', 0, 366, 1, NULL, 54900.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (791, '1648881415047870235', '混凝土界桩搬运埋设', 0, 366, 1, NULL, 46116.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (792, '1648881415047870235', '界牌制作', 0, 18, 1, NULL, 1620.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (793, '1648881415047870257', '土地复垦区地形图测绘', 0, 1.441, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (794, '1648881415047870335', '实物指标配合测量', 0, NULL, 1, NULL, NULL, '外委项目');
INSERT INTO `cmc_settle_work` VALUES (795, '1648881415047870235', '外业-地形图测绘/地形图(无人机)测绘', 0, 37.82, 1, '1', 61268.40, '修补测量大，耽误工期，按照困难地类');
INSERT INTO `cmc_settle_work` VALUES (796, '1648881415047870235', '界牌埋设', 0, 5, 1, NULL, 950.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (797, '1648881415047870235', '配合工作', 0, 22, 1, NULL, 7920.00, '2020年配合验收5天，2021年验收1天，移交资料4天。配合水务局执法影像判别工作12天');
INSERT INTO `cmc_settle_work` VALUES (798, '1648881415047870235', '外业-项目管理费', 0, 1, 1, NULL, 12500.00, '项目委托张进管理。按合同额的1%结算。');
INSERT INTO `cmc_settle_work` VALUES (799, '1648881415047870235', '委外地形图、断面整改(已从委外费用扣除）', 0, 44, 1, NULL, 8800.00, '尹超14天、甘雨婷3天、邹霞3天、雷情情2天、罗声燕5.5天、苟旭5天、胡丹1天、马秀8天、杨茜2.5天');
INSERT INTO `cmc_settle_work` VALUES (800, '1648881415047870194', '郫都区第三次全国土地调查项目（包二）', 0, 1, 1, '0', 104600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (801, '1648881415047870155', '地形图测绘外业', 0, 0.53, 1, '0', 1502.60, '无人机飞行0.45');
INSERT INTO `cmc_settle_work` VALUES (802, '1648881415047870140', '两河口水电站工程测量服务（2020年度）', 0, 1, 1, NULL, 620000.00, '项目年度委托总费用');
INSERT INTO `cmc_settle_work` VALUES (803, '1648881415047870174', '扯索坝垮塌段地形图测绘', 0, 0.1, 1, NULL, 2000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (804, '1648881415047870174', '扯索坝净水厂及高位水池地形图测绘', 0, 0.1, 1, NULL, 2000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (805, '1648881415047870174', '二里坝净水厂地形图测绘', 0, 0.1, 1, NULL, 2000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (806, '1648881415047870174', '二里坝取水枢纽地形图测绘', 0, 0.11, 1, NULL, 2200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (807, '1648881415047870174', '冷碛防护工程地形图测绘', 0, 0.11, 1, NULL, 2200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (808, '1648881415047870174', '扯索坝取水口及跨沟段地形图测绘', 0, 0.1, 1, NULL, 2000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (809, '1648881415047870174', '泸定二中塌岸防护工程地形图测绘', 0, 0.1, 1, NULL, 2000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (810, '1648881415047870174', '地形图测绘（内业）', 0, 0.72, 1, NULL, 812.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (811, '1648881415047870174', '五等导线（四等三角高程）', 0, 21.5, 1, NULL, 6622.00, '单程双测增加 40%');
INSERT INTO `cmc_settle_work` VALUES (812, '1648881415047870174', '进出场', 0, 22, 1, NULL, 6600.00, '夏志军、黄安堂、邓静、彭永红、李学勇、雷光泽、张明勇等7人进出场，往返共2天。夏志军、黄安堂、邓静、陈');
INSERT INTO `cmc_settle_work` VALUES (813, '1648881415047870450', '农经权项目2020之年后工作', 0, 1, 1, NULL, 583910.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (814, '1648881415047870300', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 10, 1.25, '0', 1187.50, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (815, '1648881415047870300', '外业-地形图测绘/地形图(无人机)测绘', 0, 11.53, 1.25, '0', 19456.90, '测绘工程中心完成像控点、检查点、调绘工作。');
INSERT INTO `cmc_settle_work` VALUES (816, '1648881415047870300', '内业-航测/地形图航测', 0, 11.53, 0, '0', 0.00, '委外完成');
INSERT INTO `cmc_settle_work` VALUES (817, '1648881415047870300', '内业-DEM、地形面/DEM、三维地形面制作', 0, 11.53, 1, '0', 2306.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (818, '1648881415047870300', '外业-航飞/无人机航飞(飞行项目）', 0, 3, 1, '1', 1200.00, '3人*1天，测绘工程中心完成了部分飞行。');
INSERT INTO `cmc_settle_work` VALUES (819, '1648881415047870300', '外业-其他/进出场', 0, 9, 1, '1', 2970.00, '3人*3天');
INSERT INTO `cmc_settle_work` VALUES (820, '1648881415047870178', '带状地形图测绘（外业）', 0, 467.6, 1.35, '0', 121959.40, '卫片测图');
INSERT INTO `cmc_settle_work` VALUES (821, '1648881415047870178', '带状地形图测绘（内业）', 0, 467.6, 1, '0', 51436.00, '卫片测图，航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (822, '1648881415047870178', '带状地形图测绘（内业）', 0, 22.15, 1, '0', 221.50, '卫片测图，航测遥感中心完成，按扫描地形图数字化10000标准的0.5计算。');
INSERT INTO `cmc_settle_work` VALUES (823, '1648881415047870178', 'DOM制作', 0, 467.6, 1, '1', 11690.00, '航测遥感中心完成，卫片制作，流程复杂，按困难地类结算，匀色、裁切、分幅');
INSERT INTO `cmc_settle_work` VALUES (824, '1648881415047870178', 'DEM制作', 0, 467.6, 1, '0', 14028.00, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (825, '1648881415047870178', 'DOM制作', 0, 22.15, 1, '1', 221.50, '航测遥感中心完成，卫片制作，流程复杂，按困难地类结算，匀色、裁切、分幅，按10000标准的0.5计算。');
INSERT INTO `cmc_settle_work` VALUES (826, '1648881415047870178', 'DEM制作', 0, 22.15, 1, '0', 387.60, '航测遥感中心完成。按10000标准的0.5计算。');
INSERT INTO `cmc_settle_work` VALUES (827, '1648881415047870178', '涉河建筑统计', 0, 7, 1, '0', 1470.00, '航测遥感中心根据影像完成，实际天数统计');
INSERT INTO `cmc_settle_work` VALUES (828, '1648881415047870178', '图集制作', 0, 37, 1, '0', 7770.00, '地理信息中心完成，实际天数统计');
INSERT INTO `cmc_settle_work` VALUES (829, '1648881415047870178', '高原常备药品等', 0, 1, 1, '0', 1573.60, '测区最高海拔4900元左右，常备高原用药品。');
INSERT INTO `cmc_settle_work` VALUES (830, '1648881415047870178', '现场租车', 0, 1, 1, '0', 14626.00, '明细见附件。');
INSERT INTO `cmc_settle_work` VALUES (831, '1648881415047870178', '进出场交通费', 0, 1, 1, '0', 12212.00, '发票按冲账处理，未报账。明细见附件。');
INSERT INTO `cmc_settle_work` VALUES (832, '1648881415047870178', '外业进出场', 0, 50, 1, '0', 16500.00, '明细见附件。');
INSERT INTO `cmc_settle_work` VALUES (833, '1648881415047870299', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 9, 1.25, '0', 1068.80, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (834, '1648881415047870299', '外业-地形图测绘/地形图(无人机)测绘', 0, 10.37, 0.25, '0', 3499.90, '测绘工程中心完成像控点、检查点测量。系数为1.25*0.2。');
INSERT INTO `cmc_settle_work` VALUES (835, '1648881415047870249', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.41, 1, '0', 3136.50, '右岸柳林坝未防护地段1:500地形图测绘。无人机测绘。');
INSERT INTO `cmc_settle_work` VALUES (836, '1648881415047870249', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.369, 1, '0', 2822.90, '闸坝左右岸及闸坝本身1:500地形图测绘。无人机测绘。');
INSERT INTO `cmc_settle_work` VALUES (837, '1648881415047870249', '内业-航测/地形图航测', 0, 0.369, 0.1, '0', 173.40, '航测遥感中心 空三加密');
INSERT INTO `cmc_settle_work` VALUES (838, '1648881415047870249', '内业-航测/地形图航测', 0, 0.592, 1.1, '0', 3060.60, '测绘工程中心（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (839, '1648881415047870249', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.182, 1, '0', 1392.30, '左岸新德坝1:500地形图测绘。无人机测绘。');
INSERT INTO `cmc_settle_work` VALUES (840, '1648881415047870249', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 10, 1.1, '0', 1900.00, '刻石');
INSERT INTO `cmc_settle_work` VALUES (841, '1648881415047870335', '现场配合', 0, 42, 1, '1', 16800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (842, '1648881415047870146', '混凝土地面标选点和建造', 0, 3, 1, NULL, 900.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (843, '1648881415047870146', '边角网观测', 0, 20, 1, NULL, 14780.00, '边角网增加 60%');
INSERT INTO `cmc_settle_work` VALUES (844, '1648881415047870146', '三角高程测量', 0, 12.37, 1, NULL, 3325.00, '代替三等三角高程（单程双测）增加 60%');
INSERT INTO `cmc_settle_work` VALUES (845, '1648881415047870146', '现场控制点移交（配合测量）', 0, 2, 1, NULL, 720.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (846, '1648881415047870146', '进出场', 0, 6, 1, NULL, 1980.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (847, '1648881415047870146', '平面观测墩选点和建造墩标', 0, 6, 1, NULL, 10800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (848, '1648881415047870249', '外业-航飞/无人机航飞(飞行项目）', 0, 6, 1, '0', 2400.00, '2人*3天');
INSERT INTO `cmc_settle_work` VALUES (849, '1648881415047870132', '培训人员', 0, 13, 1, NULL, 2730.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (850, '1648881415047870132', '地形图测绘', 0, 28.5, 1, NULL, 17670.00, '利用机载激光数据测制地形图');
INSERT INTO `cmc_settle_work` VALUES (851, '1648881415047870246', '报告编写', 0, 6, 1, '0', 6000.00, '观测数据计算及报告编写');
INSERT INTO `cmc_settle_work` VALUES (852, '1648881415047870246', '应急抢险', 0, 36, 1, '0', 12960.00, '抢险监测，3人12天');
INSERT INTO `cmc_settle_work` VALUES (853, '1648881415047870246', '现场交点', 0, 1, 1, '0', 360.00, '丁亮现场交接');
INSERT INTO `cmc_settle_work` VALUES (854, '1648881415047870246', '大坝安全评审会', 0, 2, 1, '0', 720.00, '郑鹏1人2天，不含马如坤天数');
INSERT INTO `cmc_settle_work` VALUES (855, '1648881415047870220', '1:2000地形图处理', 0, 15, 1, '0', 1920.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (856, '1648881415047870220', '钻孔收桩', 0, 80, 1, '0', 24240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (857, '1648881415047870220', '1:2000断面测量', 0, 15, 1, '0', 510.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (858, '1648881415047870220', '委托管理费', 0, 104250, 1, NULL, 104250.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (859, '1648881415047870246', '四川岷江汉阳电站大坝外部变形监测', 0, 6, 1, '0', 60000.00, '（2020.3～2021.2定期观测和基准网基准值复测），20年总公司任务部分。参照分公司结算');
INSERT INTO `cmc_settle_work` VALUES (860, '1648881415047870129', '猴子岩水电站角坝土料场地形图测绘', 0, 0.37, 1, NULL, 1265.40, '无人机按 45%');
INSERT INTO `cmc_settle_work` VALUES (861, '1648881415047870129', '猴子岩水电站角坝土料场地形图测绘（内业）', 0, 0.37, 1, NULL, 732.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (862, '1648881415047870129', '钻孔配合测量', 0, 3, 1, NULL, 1080.00, '2021年4月8日配合地质专业测量，李胜才通知。参与人员3人（彭永红、李学勇、雷光泽）');
INSERT INTO `cmc_settle_work` VALUES (863, '1648881415047870129', '控制点', 0, 3, 1, NULL, 600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (864, '1648881415047870129', '进出场', 0, 8, 1, NULL, 2400.00, '夏志军、黄安堂、邓静、陈建贤4人，往返共计8天。');
INSERT INTO `cmc_settle_work` VALUES (865, '1648881415047870143', '枢纽工程三维地形面', 0, 5.21, 1, NULL, 5731.00, '三维地形面单价不清楚，请项目管理部核实单价');
INSERT INTO `cmc_settle_work` VALUES (866, '1648881415047870143', '激光点云分类', 0, 0.4, 1, NULL, 240.00, '已有资料不够，需要点云分类');
INSERT INTO `cmc_settle_work` VALUES (867, '1648881415047870196', '内业-其他/配合测量', 0, 79, 1, '0', 16590.00, '内业');
INSERT INTO `cmc_settle_work` VALUES (868, '1648881415047870392', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 800.00, '2人（含司机）1天');
INSERT INTO `cmc_settle_work` VALUES (869, '1648881415047870392', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '夏志军、赵明焱、熊艳华参与项目');
INSERT INTO `cmc_settle_work` VALUES (870, '1648881415047870359', '外业-其他/配合测量', 0, 9, 1, '1', 3600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (871, '1648881415047870355', '内业-航测/地形图航测', 0, 0.94, 1, '0', 1692.00, '江热村料场0.13，引水路线0.81');
INSERT INTO `cmc_settle_work` VALUES (872, '1648881415047870355', '内业-航测/地形图航测', 0, 0.03, 1, '0', 141.00, '取水口');
INSERT INTO `cmc_settle_work` VALUES (873, '1648881415047870421', '雅砻江二滩水电站大坝外部变形观测及谷坡稳定性监测（2022年）', 0, 1, 1, '0', 1101546.80, '桐子林和二滩监测项目2022年合计费用');
INSERT INTO `cmc_settle_work` VALUES (874, '1648881415047870449', '高程解算', 0, 1, 1, '0', 600.00, '自然资源部第三大地测量队解算1985国家高程基准成果');
INSERT INTO `cmc_settle_work` VALUES (875, '1648881415047870449', '外业-地形图测绘/地形图外业实测', 0, 0.066, 1, '0', 415.80, '渣场1');
INSERT INTO `cmc_settle_work` VALUES (876, '1648881415047870229', '金川水电站工程测量中心劳务配合（2022年度）', 0, NULL, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (877, '1648881415047870449', '外业-地形图测绘/地形图外业实测', 0, 0.009, 1, '0', 56.70, '渣场2');
INSERT INTO `cmc_settle_work` VALUES (878, '1648881415047870449', '外业-地形图测绘/地形图外业实测', 0, 0.003, 1, '0', 18.90, '渣场1（建渣）');
INSERT INTO `cmc_settle_work` VALUES (879, '1648881415047870449', '外业-地形图测绘/地形图外业实测', 0, 0.008, 1, '0', 50.40, '渣场2（建渣）');
INSERT INTO `cmc_settle_work` VALUES (880, '1648881415047870449', '外业-地形图测绘/地形图外业实测', 0, 0.05, 1, '0', 150.00, '渣场（石料）');
INSERT INTO `cmc_settle_work` VALUES (881, '1648881415047870449', '外业-其他/进出场', 0, 10, 1, '0', 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (882, '1648881415047870326', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 19, 1, '1', 14630.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (883, '1648881415047870326', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 3, 1, '1', 1386.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (884, '1648881415047870326', '外业-高程测量/三角高程测量、单程双测', 0, 44.847, 1, '1', 12054.90, NULL);
INSERT INTO `cmc_settle_work` VALUES (885, '1648881415047870261', '新联土料场地形图补充测绘', 0, 0.15, 1, '0', 270.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (886, '1648881415047870355', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 1.5, '0', 1710.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (887, '1648881415047870355', '外业-高程测量/三角高程测量', 0, 7.35, 1.5, '0', 1389.10, NULL);
INSERT INTO `cmc_settle_work` VALUES (888, '1648881415047870213', '工程监理', 0, 205000, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (889, '1648881415047870392', '外业-地形图测绘/地形图外业实测', 0, 0.02, 1, '0', 340.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (890, '1648881415047870249', '外业-其他/进出场', 0, 4, 1, '0', 1200.00, '2人*2天');
INSERT INTO `cmc_settle_work` VALUES (891, '1648881415047870355', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.94, 1.5, '0', 3997.30, NULL);
INSERT INTO `cmc_settle_work` VALUES (892, '1648881415047870196', '外业-其他/配合测量', 0, 95, 1, '1', 38000.00, '外业');
INSERT INTO `cmc_settle_work` VALUES (893, '1648881415047870170', '地形地类图测绘（外业）', 0, 0.4, 1, NULL, 1474.20, '无人机测图系数0.45，地形地类图增加0.3');
INSERT INTO `cmc_settle_work` VALUES (894, '1648881415047870170', '地形地类图测绘（内业）', 0, 0.4, 1, NULL, 910.80, '航测遥感中心完成，地形地类图增加0.15');
INSERT INTO `cmc_settle_work` VALUES (895, '1648881415047870170', '桥址地形地类图测绘（外业）', 0, 0.016, 1, NULL, 159.10, '无人机测图系数0.45，地形地类图增加0.3');
INSERT INTO `cmc_settle_work` VALUES (896, '1648881415047870170', '桥址地形地类图测绘（内业）', 0, 0.016, 1, NULL, 95.10, '航测遥感中心完成，地形地类图增加0.15');
INSERT INTO `cmc_settle_work` VALUES (897, '1648881415047870170', '桥址横断面测量', 0, 0.2, 1, NULL, 176.00, '95米，按200米计算');
INSERT INTO `cmc_settle_work` VALUES (898, '1648881415047870170', 'GNSS测量引测', 0, 2, 1, NULL, 500.00, '利用旧点，按0.5');
INSERT INTO `cmc_settle_work` VALUES (899, '1648881415047870170', 'GNSS测量', 0, 2, 1, NULL, 1000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (900, '1648881415047870170', '三角高程测量', 0, 6.54, 1, NULL, 824.00, '附和线路');
INSERT INTO `cmc_settle_work` VALUES (901, '1648881415047870170', '无人机飞行', 0, 2, 1, NULL, 720.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (902, '1648881415047870170', '进出场', 0, 8, 1, NULL, 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (903, '1648881415047870199', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.47, 1.25, '1', 290.80, '强木金山洪区1:5000地形图测绘0.38；\n玉麦山洪、玉麦乡河道1:5000地形图测绘0.04；\n扎日河道1:5000地形图');
INSERT INTO `cmc_settle_work` VALUES (904, '1648881415047870199', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 62.41, 1.25, '1', 15914.50, '日当~隆子灌区，41.93；\n热荣灌区，4.37；\n热荣灌区2，10.57；\n僧毕雄曲灌区，5.54。');
INSERT INTO `cmc_settle_work` VALUES (905, '1648881415047870199', '内业-航测/地形图航测', 0, 0.47, 1.1, '0', 113.70, '测绘工程中心内业组完成。');
INSERT INTO `cmc_settle_work` VALUES (906, '1648881415047870199', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 62.41, 1.1, '0', 11533.40, '航测遥感中心完成。');
INSERT INTO `cmc_settle_work` VALUES (907, '1648881415047870156', '砼观测墩选点与造埋', 0, 10, 1, '0', 16000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (908, '1648881415047870156', '混凝土基本水准标石选点与造埋', 0, 3, 1, '0', 1500.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (909, '1648881415047870228', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 330.61, 1.15, '1', 77561.10, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (910, '1648881415047870228', '内业-航测/地形图航测', 0, 330.61, 1.1, '0', 40003.80, '航测遥感中心完成，空三加密');
INSERT INTO `cmc_settle_work` VALUES (911, '1648881415047870228', '内业-DOM/DOM制作', 0, 330.61, 1, '0', 6612.20, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (912, '1648881415047870237', '1:5000三维地形面', 0, 55.94, 1, '0', 3915.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (913, '1648881415047870153', '地形图测绘（内业）', 0, 13.86, 1, '0', 38115.00, '激光点云成图，航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (914, '1648881415047870153', '现场管理', 0, 7, 1, '0', 2310.00, '委外调绘工作现场检查和管理');
INSERT INTO `cmc_settle_work` VALUES (915, '1648881415047870153', '无人机激光数据采集', 0, 24, 1, '0', 9600.00, '李仁贵、王刚、周强、周建伟，4人、6天');
INSERT INTO `cmc_settle_work` VALUES (916, '1648881415047870153', '地形图测绘（外业）', 0, 13.86, 1, '0', 4712.40, '测绘工程中心完成检查点');
INSERT INTO `cmc_settle_work` VALUES (917, '1648881415047870153', '水库区及工程建设区1:500地形图测绘进出场', 0, 16, 1, '0', 5280.00, '第一次周强、王刚、周建伟3人；第二次周强、王刚、李仁贵、黄建春、周建伟5人；');
INSERT INTO `cmc_settle_work` VALUES (918, '1648881415047870153', '库区地形图修补测（外业实测）', 0, 0.272, 1, '1', 979.20, '分散、带状实测难度大');
INSERT INTO `cmc_settle_work` VALUES (919, '1648881415047870159', '地形地类图测绘（外业）', 0, 5.183, 1.2, '0', 10187.70, '激光点云方式成图。坝址区3.941；玉坝村1.872，地形地类图增加30％。');
INSERT INTO `cmc_settle_work` VALUES (920, '1648881415047870159', '地形地类图测绘（内业）', 0, 5.183, 1, '0', 7950.70, '航激光点云方式成图。测遥感中心完成，地形地类图增加30％。');
INSERT INTO `cmc_settle_work` VALUES (921, '1648881415047870159', '库区地形地类图测绘（外业）', 0, 14.615, 1.2, '0', 13679.60, '激光点云方式成图。地形地类图增加30％。');
INSERT INTO `cmc_settle_work` VALUES (922, '1648881415047870159', '库区地形地类图测绘（内业）', 0, 14.615, 1, '0', 11779.70, '激光点云方式成图。航测遥感中心完成，地形地类图增加30％。');
INSERT INTO `cmc_settle_work` VALUES (923, '1648881415047870121', '康定市三道桥村地形图测绘', 0, 0.94, 1, NULL, 2931.40, '无人机按45%计算');
INSERT INTO `cmc_settle_work` VALUES (924, '1648881415047870121', '康定市水桥村地形图测绘', 0, 0.5, 1, NULL, 11050.00, '康定机场附近禁飞区域，人工实测。（2021年4月）');
INSERT INTO `cmc_settle_work` VALUES (925, '1648881415047870121', '康定市升航村大坡地安置点地形图测绘', 0, 0.23, 1, NULL, 717.30, '无人机按45%计算');
INSERT INTO `cmc_settle_work` VALUES (926, '1648881415047870121', '康定市水桥村地形图测绘（补测）', 0, 0.14, 1, NULL, 3094.00, '康定机场附近禁飞区域，人工实测。（2021年6月）');
INSERT INTO `cmc_settle_work` VALUES (927, '1648881415047870121', '康定市水桥村引水线路地形图测绘', 0, 0.8, 1, NULL, 6552.00, '康定机场附近禁飞区域，人工实测。（2021年4月）');
INSERT INTO `cmc_settle_work` VALUES (928, '1648881415047870121', '康定市牛棚子村地形图测绘', 0, 0.24, 1, NULL, 748.40, '无人机按45%计算');
INSERT INTO `cmc_settle_work` VALUES (929, '1648881415047870121', '地形图测绘（内业）', 0, 1.41, 1, NULL, 2791.80, '外业采用无人机，');
INSERT INTO `cmc_settle_work` VALUES (930, '1648881415047870121', '地形图测绘（内业）', 0, 0.8, 1, NULL, 316.80, '外业实测');
INSERT INTO `cmc_settle_work` VALUES (931, '1648881415047870121', '地形图测绘（内业）', 0, 0.19, 1, NULL, 214.30, '外业实测');
INSERT INTO `cmc_settle_work` VALUES (932, '1648881415047870121', '控制点（刻石）', 0, 15, 1, NULL, 1710.00, '外业高程系数按1.2计');
INSERT INTO `cmc_settle_work` VALUES (933, '1648881415047870121', '三道桥钻孔配合测量', 0, 10, 1, NULL, 3600.00, '公司安排，6月3日～6月7日至三道桥配合移民分公司钻孔测量，黄安堂和张波两人参与，2*5=10天');
INSERT INTO `cmc_settle_work` VALUES (934, '1648881415047870121', '进出场', 0, 12, 1, NULL, 3600.00, '共2次进出场。第1次为夏志军、黄安堂、邓静。第2次为杨晶、何涛、周建伟。6*2=12');
INSERT INTO `cmc_settle_work` VALUES (935, '1648881415047870204', '项目委托管理费3%', 0, 1, 1, '0', 40950.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (936, '1648881415047870153', '内业-编图/地形图数字化（库区地形图）', 0, 0.272, 1, '0', 38.40, '测绘工程中心内业组编图');
INSERT INTO `cmc_settle_work` VALUES (937, '1648881415047870153', '库区1:2000地形图修补测进出场', 0, 10, 1, '0', 3300.00, '赵洪、陈敏、粟志成、梁成龙、周建伟5人');
INSERT INTO `cmc_settle_work` VALUES (938, '1648881415047870247', '无人机航拍原始影像、POS数据、像控点坐标及实景三维模型', 0, 0.5, 1.2, '0', 1080.00, '利用已有资料制作-航测遥感中心');
INSERT INTO `cmc_settle_work` VALUES (939, '1648881415047870247', '三维地形面', 0, 2.03, 1, '0', 913.50, '利用已有地形图资料制作-航测遥感中心');
INSERT INTO `cmc_settle_work` VALUES (940, '1648881415047870247', '内业-DOM/DOM制作', 0, 0.52, 1, '0', 156.00, '利用已有资料制作-航测遥感中心');
INSERT INTO `cmc_settle_work` VALUES (941, '1648881415047870240', '1:500地形图测绘', 0, 0.025, 1.1, '0', 129.30, '航测成图，同时提供正射影像');
INSERT INTO `cmc_settle_work` VALUES (942, '1648881415047870247', '1:5000调绘', 0, 7.64, 0.2, '0', 1375.20, '平均海拔3800，增加25%，0.2*0.8*1.25-测绘工程中心');
INSERT INTO `cmc_settle_work` VALUES (943, '1648881415047870240', '1:2000DOM', 0, 0.57, 1, '0', 85.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (944, '1648881415047870240', '1:2000地形图测绘', 0, 0.57, 1.1, '0', 470.30, '航测成图，同时提供正射影像');
INSERT INTO `cmc_settle_work` VALUES (945, '1648881415047870240', '1:500DOM', 0, 0.025, 1, '0', 18.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (946, '1648881415047870240', '外业委外', 0, NULL, 1, '0', 0.00, '委外单位：四川天辰空间信息有限公司');
INSERT INTO `cmc_settle_work` VALUES (947, '1648881415047870247', '内业-激光数据预处理/激光数据预处理', 0, 7.64, 1, NULL, 458.40, '按1:2000飞行、解算-激光技术中心');
INSERT INTO `cmc_settle_work` VALUES (948, '1648881415047870237', '激光点云数据采集', 0, 12, 1.5, '0', 7200.00, '朱倪强 王刚 邓锡全 8.22-8.25 4天 系数1.5  平均海拔3700米');
INSERT INTO `cmc_settle_work` VALUES (949, '1648881415047870245', '项目委托费用', 0, 0.25, 1, '1', 321437.80, '合同金额25%比例结算。');
INSERT INTO `cmc_settle_work` VALUES (950, '1648881415047870204', '经营奖励2%', 0, 1, 1, '0', 27300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (951, '1648881415047870247', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 15, 1.5, '0', 9000.00, '平均海拔3800，增加0.5系数，3人，进出场4天，飞行1天-激光技术中心');
INSERT INTO `cmc_settle_work` VALUES (952, '1648881415047870247', '坐标转换', 0, 112, 1, '0', 1680.00, '航测遥感中心');
INSERT INTO `cmc_settle_work` VALUES (953, '1648881415047870247', '外业-其他/进出场', 0, 4, 1, '0', 1200.00, '外业进出场1人，进出场4天，共计4人天-测绘工程中心');
INSERT INTO `cmc_settle_work` VALUES (954, '1648881415047870159', '地形图测绘（外业）', 0, 10.125, 1.2, '0', 15309.00, '激光点云方式成图。施工场地5.211；厂址区4.914');
INSERT INTO `cmc_settle_work` VALUES (955, '1648881415047870159', '地形图测绘（内业）', 0, 10.125, 1, '0', 11947.50, '激光点云方式成图。航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (956, '1648881415047870159', '地形图测绘（外业）', 0, 3.876, 1.2, '0', 2790.70, '改激光点云方式成图。建公路2.529；厂址区下游至易贡藏布汇口1.338');
INSERT INTO `cmc_settle_work` VALUES (957, '1648881415047870392', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.067, 1, '0', 512.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (958, '1648881415047870187', '金阳一标段地形图测绘', 0, NULL, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (959, '1648881415047870187', '金阳四标溜砂坡地形图测绘', 0, NULL, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (960, '1648881415047870187', '雷波县岩湾隧道进口、出口地形图测绘', 0, NULL, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (961, '1648881415047870187', '隧道进出口附近控制点测量', 0, NULL, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (962, '1648881415047870187', '金阳六标春江桥1:500地形图测绘', 0, NULL, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (963, '1648881415047870124', '水下地形图测绘（外业）', 0, 0.08, 1, NULL, 300.20, '面积太小、按困难地类，数据采集3600、编辑按测图单价0.17计算');
INSERT INTO `cmc_settle_work` VALUES (964, '1648881415047870124', '内业-编图/地形图数字化', 0, 0.28, 1, NULL, 231.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (965, '1648881415047870124', '无人机飞行', 0, 4, 1, NULL, 1440.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (966, '1648881415047870124', '进出场', 0, 20, 1, NULL, 6000.00, '含无人机和无人船分别进场');
INSERT INTO `cmc_settle_work` VALUES (967, '1648881415047870171', 'GNSSS测量', 0, 4, 1, NULL, 3080.00, '新建点');
INSERT INTO `cmc_settle_work` VALUES (968, '1648881415047870171', '边角网观测', 0, 6, 1, NULL, 7392.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (969, '1648881415047870171', '三角高程测量', 0, 5.19, 1, NULL, 1390.90, NULL);
INSERT INTO `cmc_settle_work` VALUES (970, '1648881415047870171', '施工支洞区转成国家2000大地坐标系', 0, 72, 1, NULL, 1080.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (971, '1648881415047870171', '控制点选埋', 0, 6, 1, NULL, 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (972, '1648881415047870171', '外业进出场', 0, 6, 1, NULL, 1980.00, '3人*2天');
INSERT INTO `cmc_settle_work` VALUES (973, '1648881415047870197', '充底项目成本', 0, 1, 1, NULL, 16000.00, '预结算');
INSERT INTO `cmc_settle_work` VALUES (974, '1648881415047870335', '项目管理费', 0, 1, 1, NULL, 17988.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (975, '1648881415047870302', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 4, 1.15, '0', 874.00, '测区平均海拔3300m，增加15%');
INSERT INTO `cmc_settle_work` VALUES (976, '1648881415047870302', '内业-DEM、地形面/DEM、三维地形面制作', 0, 8.42, 1, '0', 1684.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (977, '1648881415047870302', '内业修补图', 0, 4, 1, '0', 840.00, '何玲、陈波完成');
INSERT INTO `cmc_settle_work` VALUES (978, '1648881415047870302', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '1', 1600.00, '测区在甘孜州，因此按复杂地类');
INSERT INTO `cmc_settle_work` VALUES (979, '1648881415047870302', '外业-地形图测绘/地形图(无人机)测绘', 0, 8.42, 1.15, '0', 13072.00, '此项工作为调绘及像控点和检查点测量，测区海拔3300m，增加15%');
INSERT INTO `cmc_settle_work` VALUES (980, '1648881415047870216', '水下地形图测绘', 0, NULL, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (981, '1648881415047870216', '地形图测绘', 0, NULL, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (982, '1648881415047870216', '横断面测量（含水下）', 0, NULL, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (983, '1648881415047870124', '岸上地形图测绘（外业）', 0, 0.2, 1, NULL, 324.00, '面积太小、按困难地类，无人机0.45。');
INSERT INTO `cmc_settle_work` VALUES (984, '1648881415047870216', '纵断面', 0, NULL, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (985, '1648881415047870216', '纵断面', 0, NULL, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (986, '1648881415047870171', 'GNSSS测量', 0, 3, 1, NULL, 1386.00, '利用旧点');
INSERT INTO `cmc_settle_work` VALUES (987, '1648881415047870223', '立面图测量', 0, NULL, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (988, '1648881415047870223', '项目管理与资料整编', 0, 2000, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (989, '1648881415047870302', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '外业作业小组共3人。');
INSERT INTO `cmc_settle_work` VALUES (990, '1648881415047870361', '委外飞行（激光数据采集）', 0, 2, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (991, '1648881415047870361', '内业-激光制图/激光数据制作地形图', 0, 3.37, 1, '0', 3976.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (992, '1648881415047870260', '二等GNSS平面连接网', 0, 6, 0.6, '1', 3132.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (993, '1648881415047870202', '外业-其他/无人机航飞', 0, 21, 1, '1', 7560.00, '视频航拍、影像采集');
INSERT INTO `cmc_settle_work` VALUES (994, '1648881415047870202', '内业-航测/地形图航测', 0, 18.25, 0.1, '0', 1368.80, '空三加密');
INSERT INTO `cmc_settle_work` VALUES (995, '1648881415047870202', '内业-DOM/DOM制作', 0, 18.25, 1, '0', 2737.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (996, '1648881415047870260', '二等地面三角形网观测', 0, 14, 1.6, '1', 19488.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (997, '1648881415047870260', '三等GNSS点观测', 0, 20, 0.6, '1', 9240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (998, '1648881415047870260', '二等水准引测', 0, 3, 1, '1', 1440.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (999, '1648881415047870260', '三等三角高程观测', 0, 38.1, 0.7, '1', 6400.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (1000, '1648881415047870260', '二等水准观测', 0, 41, 1, '1', 19680.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1001, '1648881415047870269', '外业-地形图测绘/地形图(无人机)测绘', 0, 9.373, 0.675, '1', 10249.40, '测绘工程中心');
INSERT INTO `cmc_settle_work` VALUES (1002, '1648881415047870260', '选点及现场协调', 0, 12, 1, '1', 3600.00, '4人*3天（人员：黄安堂、彭永红、何涛、凌涛；8月2日-8月4日）');
INSERT INTO `cmc_settle_work` VALUES (1003, '1648881415047870260', '人员进场', 0, 20, 1, '1', 6000.00, '地震进场两次：5人*4天=20人天（黄安堂、彭永红、李学勇、凌涛、雷光泽）');
INSERT INTO `cmc_settle_work` VALUES (1004, '1648881415047870269', '内业-航测/地形图航测', 0, 9.373, 0.5, '0', 3514.90, '测绘工程中心');
INSERT INTO `cmc_settle_work` VALUES (1005, '1648881415047870260', '人员窝工', 0, 12, 1, '1', 3600.00, '地震导致工作无法开展：4人*3天=12人天(9月6日-9月8日，人员：黄安堂、彭永红、李学勇、凌涛）');
INSERT INTO `cmc_settle_work` VALUES (1006, '1648881415047870269', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '1', 800.00, '测绘工程中心');
INSERT INTO `cmc_settle_work` VALUES (1007, '1648881415047870269', '外业-其他/进出场', 0, 8, 1, '1', 2640.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1008, '1648881415047870270', '项目委托费用', 0, 0.25, 1, '0', 237011.50, '合同金额25%比例结算。');
INSERT INTO `cmc_settle_work` VALUES (1009, '1648881415047870260', '用地及青苗赔偿费', 0, 1, 1, '1', 4100.00, '见附件1');
INSERT INTO `cmc_settle_work` VALUES (1010, '1648881415047870372', '内业-激光制图/激光数据制作地形图', 0, 8.1, 1, '0', 5022.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1011, '1648881415047870372', '内业-DEM、地形面/DEM、三维地形面制作', 0, 8.1, 1, '0', 1620.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1012, '1648881415047870372', '外业-高程测量/三角高程测量', 0, 6.46, 0.98, '0', 1139.50, '单程双测增加40%');
INSERT INTO `cmc_settle_work` VALUES (1013, '1648881415047870372', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 1, '0', 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1014, '1648881415047870372', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 8.1, 1, '0', 9720.00, '白纸调绘；地物较多较复杂。建议参照航片测绘结算标准。');
INSERT INTO `cmc_settle_work` VALUES (1015, '1648881415047870269', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 10, 1.35, '1', 2700.00, '测绘工程中心');
INSERT INTO `cmc_settle_work` VALUES (1016, '1648881415047870186', '外业-其他/配合测量', 0, 42, 1, '1', 16800.00, '蒲帆、徐志勇、凌涛2022.3.23-4.5');
INSERT INTO `cmc_settle_work` VALUES (1017, '1648881415047870186', '现场商务费用', 0, 1, 1, NULL, 7000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1018, '1648881415047870285', '进出场', 0, 10, 1, '0', 3000.00, '参与人员：周全、彭永红、邓静、何安、雷光泽等5人。');
INSERT INTO `cmc_settle_work` VALUES (1019, '1648881415047870285', '墩标控制点建造', 0, 5, 1, '0', 9000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1020, '1648881415047870119', '外业-地形图测绘/地形图(无人机)测绘', 0, 2.08, 1.1, '1', 7825.00, '无人机航测成图。阿斯布土料场、当卡料场、坝区开挖竣工区域。');
INSERT INTO `cmc_settle_work` VALUES (1021, '1648881415047870119', '内业-DEM、地形面/DEM、三维地形面制作', 0, 2.08, 1, '0', 936.00, '地理信息中心完成');
INSERT INTO `cmc_settle_work` VALUES (1022, '1648881415047870119', '内业-航测/地形图航测', 0, 2.08, 1.1, '0', 4118.40, '地理信息中心完成，含空三加密费用。');
INSERT INTO `cmc_settle_work` VALUES (1023, '1648881415047870119', '外业-其他/进出场', 0, 8, 1, '1', 2640.00, '4人*2天');
INSERT INTO `cmc_settle_work` VALUES (1024, '1648881415047870119', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '1', 1600.00, '2人*2天。');
INSERT INTO `cmc_settle_work` VALUES (1025, '1648881415047870285', '砼标控制点建造', 0, 3, 1, '0', 900.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1026, '1648881415047870285', '三等GNSS平面观测', 0, 20, 1, '0', 7920.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1027, '1648881415047870285', '二等水准测量', 0, 71.4, 1, '0', 29988.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1028, '1648881415047870285', '控制网移交', 0, 4, 1, '0', 1200.00, '两人参与，两天。');
INSERT INTO `cmc_settle_work` VALUES (1029, '1648881415047870285', '资料整编（含2021年资料重新整编提交）', 0, 1, 1, '0', 4000.00, '2021年按照院内要求需重新整编，本次观测后将两次资料重新整编提交、并通过验收。');
INSERT INTO `cmc_settle_work` VALUES (1030, '1648881415047870402', '内业-激光制图/激光数据制作地形图', 0, 2, 1, '0', 420.00, '新增0.07km²,完成地形图地类图斑接边及土调表更新，激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (1031, '1648881415047870402', '内业-激光制图/激光数据制作地形图', 0, 5, 0, '0', 0.00, '外协');
INSERT INTO `cmc_settle_work` VALUES (1032, '1648881415047870402', '内业-激光制图/激光数据制作地形图', 0, 4, 1, '0', 840.00, '测绘工程中心完成制图、图斑接边及土调表更新，建议按工天计算');
INSERT INTO `cmc_settle_work` VALUES (1033, '1648881415047870402', '内业-激光数据预处理/激光数据预处理', 0, 15.17, 1, '0', 910.20, '按采集比例尺');
INSERT INTO `cmc_settle_work` VALUES (1034, '1648881415047870402', '内业-点云分类/激光点云分类', 0, 8.07, 1, '0', 1614.00, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1035, '1648881415047870402', '内业-点云分类/激光点云分类', 0, 7.1, 1, '0', 781.00, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1036, '1648881415047870402', '项目管理费', 0, 1, 1, '0', 2600.00, '外协采集合同额43200，外协制图合同额45000，按总合同额3%');
INSERT INTO `cmc_settle_work` VALUES (1037, '1648881415047870402', '平面控制测量', 0, 9, 0, '0', 0.00, '外协');
INSERT INTO `cmc_settle_work` VALUES (1038, '1648881415047870402', '高程控制测量', 0, 9, 0, '0', 0.00, '外协');
INSERT INTO `cmc_settle_work` VALUES (1039, '1648881415047870402', '内业-DOM/DOM制作', 0, 5.2, 1, '0', 260.00, '激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (1040, '1648881415047870402', '内业-激光制图/激光数据制作地形图', 0, 8, 0, '0', 0.00, '外协');
INSERT INTO `cmc_settle_work` VALUES (1041, '1648881415047870360', '内业-坐标转换/坐标系转换', 0, 16, 1, '0', 240.00, '全长60km，1:2000地形图，转换为CGCS2000坐标系');
INSERT INTO `cmc_settle_work` VALUES (1042, '1648881415047870360', '内业-比例尺缩放/地形图比例尺缩放', 0, 0.14, 0.7, '0', 221.10, '地形图比例尺放大按70％计算');
INSERT INTO `cmc_settle_work` VALUES (1043, '1648881415047870244', '项目委托费用', 0, 0.25, 1, '0', 172802.50, '合同金额25%比例结算。');
INSERT INTO `cmc_settle_work` VALUES (1044, '1648881415047870283', '项目委托费用', 0, 0.25, 1, '1', 104224.50, '合同金额25%比例结算。');
INSERT INTO `cmc_settle_work` VALUES (1045, '1648881415047870262', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 1.05, '0', 3150.00, '埋石，测区平均高程 2000～2499m，增加 5%');
INSERT INTO `cmc_settle_work` VALUES (1046, '1648881415047870262', '内业-激光制图/激光数据制作地形图', 0, 6.813, 1, '0', 4224.10, NULL);
INSERT INTO `cmc_settle_work` VALUES (1047, '1648881415047870262', '内业-激光制图/激光数据制作地形图', 0, 4.27, 1, '0', 2647.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (1048, '1648881415047870262', '内业-激光制图/激光数据制作地形图', 0, 2.36, 1, '0', 306.80, '点云成图');
INSERT INTO `cmc_settle_work` VALUES (1049, '1648881415047870262', '内业-比例尺缩放/地形图比例尺缩放', 0, 11.08, 1.2, '0', 319.10, '1:2000地形图缩编1:10000');
INSERT INTO `cmc_settle_work` VALUES (1050, '1648881415047870262', '地形图拼接', 0, 3, 1, '0', 630.00, '购买1:10000MDB地形图资料整理及与已有资料拼接为成果');
INSERT INTO `cmc_settle_work` VALUES (1051, '1648881415047870262', '外业-地形图测绘/地形图(激光)测绘', 0, 11.08, 1.05, '0', 6980.40, '测区平均高程 2000～2499m，增加 5%');
INSERT INTO `cmc_settle_work` VALUES (1052, '1648881415047870262', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 9, 1.3, '0', 4680.00, '测区平均高程 2000～2499m，增加 30%，飞行3人，9天，王刚、夏志军、熊艳华');
INSERT INTO `cmc_settle_work` VALUES (1053, '1648881415047870262', '内业-激光数据预处理/激光数据预处理1：2000', 0, 18.68, 1, '0', 1120.80, '按公司要求，考虑后期增补测，扩大飞行面积');
INSERT INTO `cmc_settle_work` VALUES (1054, '1648881415047870262', '进出场', 0, 2, 1, '0', 600.00, '周炎、杨良轩8月3日进出场。');
INSERT INTO `cmc_settle_work` VALUES (1055, '1648881415047870360', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 1.25, '0', 4950.00, '控制工作取消，现场验证系统');
INSERT INTO `cmc_settle_work` VALUES (1056, '1648881415047870402', '高程转换模型', 0, 1, 1, NULL, 300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1057, '1648881415047870360', '外业-高程测量/水准测量', 0, 5.2, 0.875, '0', 955.50, '控制工作取消，现场验证系统');
INSERT INTO `cmc_settle_work` VALUES (1058, '1648881415047870360', '外业-其他/配合测量', 0, 21, 1.25, '0', 9450.00, '现场踏勘3人2天；八窝龙、孟底沟交点3人3天；现场采点计算转换模型3人2天；');
INSERT INTO `cmc_settle_work` VALUES (1059, '1648881415047870360', '外业-公路测量/公路中桩、角桩测设', 0, 169, 1.25, '0', 3802.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (1060, '1648881415047870360', '外业-公路测量/公路参考点测量', 0, 281, 1.25, '0', 1264.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (1061, '1648881415047870331', '内业-激光制图/激光数据制作地形图', 0, 18, 0.3, '0', 3348.00, '地类图制作，按0.3计算');
INSERT INTO `cmc_settle_work` VALUES (1062, '1648881415047870183', '空域申请费用', 0, 1, 1.05, '0', 31500.00, '空域申请费用30000元，由于没有票据，考虑5%开票费用，即系数1.05');
INSERT INTO `cmc_settle_work` VALUES (1063, '1648881415047870183', '外业-其他/无人机航飞', 0, 76, 1.1, '1', 33440.00, '测区范围高程在1600米至2740米之间，按规定2000米以上增加10%，即系数1.1');
INSERT INTO `cmc_settle_work` VALUES (1064, '1648881415047870183', '租车费用', 0, 1, 1, NULL, 3150.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1065, '1648881415047870183', '内业-DEM、地形面/DEM、三维地形面制作', 0, 42.4, 1, '0', 46640.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1066, '1648881415047870183', '外业-其他/进出场', 0, 8, 1, '1', 2640.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1067, '1648881415047870183', '论文撰写', 0, 30, 1, NULL, 6300.00, '按照合同要求，需完成2篇论文撰写，按照每篇15人天计算。');
INSERT INTO `cmc_settle_work` VALUES (1068, '1648881415047870183', '其他开支', 0, 7, 1, NULL, 2065.00, '华测技术指导现场开支');
INSERT INTO `cmc_settle_work` VALUES (1069, '1648881415047870258', '猴子岩监测（6月～12月）', 0, 1, 1, '0', 856564.60, '6月～12月与甲方完成产值2855215.33元。按30%结算');
INSERT INTO `cmc_settle_work` VALUES (1070, '1648881415047870258', '猴子岩监测（1月～5月）', 0, 1, 1, '0', 833300.30, '1月～5月与甲方完成产值2777667.60元。按30%结算');
INSERT INTO `cmc_settle_work` VALUES (1071, '1648881415047870118', '飞行区、航站区、工作区地形图测绘外业调绘', 0, 141, 1, '0', 56400.00, '按外业人天计算');
INSERT INTO `cmc_settle_work` VALUES (1072, '1648881415047870118', '配合质量技术部巡图 检查', 0, 47, 1, NULL, 18800.00, '测绘工程中心');
INSERT INTO `cmc_settle_work` VALUES (1073, '1648881415047870118', 'DEM DOM转OSGB', 0, 67.9, 1, NULL, 13580.00, '地理信息中心，参照1:2000DEM标准');
INSERT INTO `cmc_settle_work` VALUES (1074, '1648881415047870118', '飞行区、航站区、工作区地形图测绘', 0, 5.321, 1, NULL, 3192.60, '航测遥感中心，改外调数据，立测房屋，按地形图30%系数');
INSERT INTO `cmc_settle_work` VALUES (1075, '1648881415047870118', '激光数据外业飞行绩效', 0, 33, 1, NULL, 13200.00, '激光技术中心，3人');
INSERT INTO `cmc_settle_work` VALUES (1076, '1648881415047870118', '激光采集人员上机费', 0, 24, 1, NULL, 4608.00, '激光技术中心，有人机采集，2人跟机飞行');
INSERT INTO `cmc_settle_work` VALUES (1077, '1648881415047870118', '飞行现场租车费', 0, 1, 1, NULL, 8500.00, '激光技术中心，租车11天，含业主两次视察商务费用。');
INSERT INTO `cmc_settle_work` VALUES (1078, '1648881415047870118', '点云预处理 影像整理', 0, 67.9, 1, NULL, 12222.00, '激光技术中心，按内业点云分类的30%计算');
INSERT INTO `cmc_settle_work` VALUES (1079, '1648881415047870118', '项目管理费（外业 内业）', 0, 66, 1, NULL, 14256.00, '激光技术中心，外业监管外协外调质量，配合业主检查，36工天。内业点云坐标转换、生成等高线高程点，修改地');
INSERT INTO `cmc_settle_work` VALUES (1080, '1648881415047870118', '进出场', 0, 30, 1, NULL, 9900.00, '测绘工程中心');
INSERT INTO `cmc_settle_work` VALUES (1081, '1648881415047870212', '外业-地形图测绘/地形图外业实测', 0, 1.43, 1.35, '1', 38610.00, '城市带状地形图测量，地物多、天气非常炎热。');
INSERT INTO `cmc_settle_work` VALUES (1082, '1648881415047870212', '外业-公路测量/公路中桩、角桩测设', 0, 385, 1.2, '0', 8316.00, '7.23km。每20米一个桩，关键位置加密。');
INSERT INTO `cmc_settle_work` VALUES (1083, '1648881415047870212', '外业-断面测量/断面测量', 0, 30.8, 1.2, '0', 36294.70, '1:100比例尺，按1:200*1:5000/1:10000推导1:100横断面单价。');
INSERT INTO `cmc_settle_work` VALUES (1084, '1648881415047870212', '外业-其他/配合测量', 0, 21, 1.2, '0', 6552.00, '踏勘4人天、37处桥梁断面测量/46处涵洞断面测量/52处沟渠河流断面测量共10人天、特征点补测7人天。');
INSERT INTO `cmc_settle_work` VALUES (1085, '1648881415047870212', '内业-编图/地形图数字化', 0, 2.43, 1, '1', 5370.30, '测绘工程中心完成，地物较多，按复杂地类计算。');
INSERT INTO `cmc_settle_work` VALUES (1086, '1648881415047870226', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 2, 0.6, '0', 600.00, '利用旧点。');
INSERT INTO `cmc_settle_work` VALUES (1087, '1648881415047870226', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 2, 1, '0', 1000.00, '新建控制点。');
INSERT INTO `cmc_settle_work` VALUES (1088, '1648881415047870226', '外业-高程测量/三角高程测量、单程双测', 0, 8.572, 1, '0', 1512.10, '联测控制点高程。');
INSERT INTO `cmc_settle_work` VALUES (1089, '1648881415047870226', '外业-地形图测绘/地形图外业实测', 0, 1.477, 1, '0', 25109.00, '无人船水下地形测量。');
INSERT INTO `cmc_settle_work` VALUES (1090, '1648881415047870226', '外业-地形图测绘/地形图(无人机)测绘', 0, 1.569, 1, '1', 14121.00, '无人机航测，城区地物多，按复杂地类计算。');
INSERT INTO `cmc_settle_work` VALUES (1091, '1648881415047870226', '内业-航测/地形图航测', 0, 1.569, 0.1, '0', 737.40, '无人机航测，空三加密。');
INSERT INTO `cmc_settle_work` VALUES (1092, '1648881415047870226', '内业-编图/地形图数字化', 0, 1.569, 0.5, '1', 1733.70, NULL);
INSERT INTO `cmc_settle_work` VALUES (1093, '1648881415047870226', '内业-编图/地形图数字化', 0, 1.477, 1, '0', 2776.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (1094, '1648881415047870226', '外业-地形图测绘/地形图(无人机)测绘', 0, 1.221, 1.2, '0', 1978.00, '地形地类图');
INSERT INTO `cmc_settle_work` VALUES (1095, '1648881415047870226', '内业-航测/地形图航测', 0, 1.221, 1.25, '0', 1144.70, '地形地类图及空三加密。');
INSERT INTO `cmc_settle_work` VALUES (1096, '1648881415047870226', '外业-航飞/无人机航飞(飞行项目）', 0, 6, 1, '0', 2400.00, '2人*3天，因甲方新增了范围，两次进场。');
INSERT INTO `cmc_settle_work` VALUES (1097, '1648881415047870226', '外业-其他/进出场', 0, 10, 1, '0', 3000.00, '2人*5天。');
INSERT INTO `cmc_settle_work` VALUES (1098, '1648881415047870212', '外业-地形图测绘/地形图外业实测', 0, 1, 0, '0', 0.00, '委外公司完成；');
INSERT INTO `cmc_settle_work` VALUES (1099, '1648881415047870212', '外业-公路测量/公路中桩、角桩测设', 0, 227, 0, '0', 0.00, '委外公司完成；');
INSERT INTO `cmc_settle_work` VALUES (1100, '1648881415047870212', '外业-断面测量/断面测量', 0, 18.16, 0, '0', 0.00, '委外公司完成；1:100比例尺横断面');
INSERT INTO `cmc_settle_work` VALUES (1101, '1648881415047870212', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 8, 1.2, '0', 6336.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1102, '1648881415047870225', '外业-地形图测绘/地形图(无人机)测绘', 0, 2.409, 1, '0', 18428.80, '无人机航测');
INSERT INTO `cmc_settle_work` VALUES (1103, '1648881415047870225', '外业-地形图测绘/地形图(无人机)测绘', 0, 5.963, 1, '0', 16905.10, '无人机航测');
INSERT INTO `cmc_settle_work` VALUES (1104, '1648881415047870225', '外业-导线测量/导线测量、四等高程', 0, 20.093, 1, '0', 5224.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (1105, '1648881415047870225', '外业-地形图测绘/地形图(无人机)测绘', 0, 14.033, 1, '0', 18944.60, '无人机航测');
INSERT INTO `cmc_settle_work` VALUES (1106, '1648881415047870225', '外业-地形图测绘/地形图外业实测', 0, 0.376, 2, '0', 12784.00, '水下地形测量，采用常规方法（钢绳）人工实测。');
INSERT INTO `cmc_settle_work` VALUES (1107, '1648881415047870225', '民工费', 0, 12, 1, '0', 1800.00, '聘请工人拉钢绳测水下地形。');
INSERT INTO `cmc_settle_work` VALUES (1108, '1648881415047870225', '外业-公路测量/公路中桩、角桩测设', 0, 30, 1, '0', 540.00, '安顺场等特征点测量。');
INSERT INTO `cmc_settle_work` VALUES (1109, '1648881415047870225', '外业-航飞/无人机航飞(飞行项目）', 0, 12, 1, '0', 4800.00, '2人*6天。');
INSERT INTO `cmc_settle_work` VALUES (1110, '1648881415047870225', '外业-其他/进出场', 0, 22, 1, '0', 6600.00, '11人*2天');
INSERT INTO `cmc_settle_work` VALUES (1111, '1648881415047870225', '内业-航测/地形图航测', 0, 2.409, 1.1, '0', 12454.50, '航测遥感中心完成。含空三加密。');
INSERT INTO `cmc_settle_work` VALUES (1112, '1648881415047870225', '内业-航测/地形图航测', 0, 5.963, 1.1, '0', 11806.70, '测绘工程中心内业组完成。含空三加密。');
INSERT INTO `cmc_settle_work` VALUES (1113, '1648881415047870225', '内业-航测/地形图航测', 0, 14.033, 1.1, '0', 11577.20, '测绘工程中心内业组完成。含空三加密。');
INSERT INTO `cmc_settle_work` VALUES (1114, '1648881415047870225', '内业-编图/地形图数字化', 0, 0.376, 1, '0', 706.90, '测绘工程中心内业组完成。水下地形图编制。');
INSERT INTO `cmc_settle_work` VALUES (1115, '1648881415047870225', '内业-比例尺缩放/地形图比例尺缩放', 0, 1.148, 1, '0', 323.70, '航测遥感中心完成，将1:500缩编为1:2000。');
INSERT INTO `cmc_settle_work` VALUES (1116, '1648881415047870225', '内业-比例尺缩放/地形图比例尺缩放', 0, 5.766, 1, '0', 1626.00, '测绘工程中心内业组完成，将1:1000缩编为1:2000。');
INSERT INTO `cmc_settle_work` VALUES (1117, '1648881415047870225', '内业-DEM、地形面/DEM、三维地形面制作', 0, 2.409, 1, '0', 2649.90, '地理信息中心完成。');
INSERT INTO `cmc_settle_work` VALUES (1118, '1648881415047870225', '外业-地形图测绘/地形图(无人机)测绘', 0, 1.8, 1, '0', 5103.00, '曾家沟地形图测绘，无人机航测。');
INSERT INTO `cmc_settle_work` VALUES (1119, '1648881415047870225', '外业-地形图测绘/地形图(无人机)测绘', 0, 8.14, 1, '0', 3296.70, '曾家沟地形图测绘，无人机航测。');
INSERT INTO `cmc_settle_work` VALUES (1120, '1648881415047870225', '内业-航测/地形图航测', 0, 1.8, 1.1, '0', 3564.00, '航测遥感中心完成。含空三加密。');
INSERT INTO `cmc_settle_work` VALUES (1121, '1648881415047870225', '内业-航测/地形图航测', 0, 8.14, 1.1, '0', 1969.90, '航测遥感中心完成。含空三加密。');
INSERT INTO `cmc_settle_work` VALUES (1122, '1648881415047870225', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1123, '1648881415047870225', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '0', 1600.00, '2人*2天');
INSERT INTO `cmc_settle_work` VALUES (1124, '1648881415047870166', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 2, 1, '0', 228.00, '引测已知点2点');
INSERT INTO `cmc_settle_work` VALUES (1125, '1648881415047870166', '外业-高程测量/水准测量', 0, 179.615, 1.1, '0', 35563.80, '水准路线高差大，增加困难系数0.1');
INSERT INTO `cmc_settle_work` VALUES (1126, '1648881415047870166', '外业-高程测量/三角高程测量', 0, 14.699, 1, '0', 1852.10, '附和线路，检测控制点精度');
INSERT INTO `cmc_settle_work` VALUES (1127, '1648881415047870166', '进出场', 0, 20, 1, '0', 6600.00, '含司机5人');
INSERT INTO `cmc_settle_work` VALUES (1128, '1648881415047870166', '委外飞行费用', 0, 1, 1, '0', 31500.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1129, '1648881415047870166', '租车费', 0, 1, 1, NULL, 8400.00, '见租车情况说明');
INSERT INTO `cmc_settle_work` VALUES (1130, '1648881415047870398', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 6, 1.6, '0', 3840.00, '3人2天');
INSERT INTO `cmc_settle_work` VALUES (1131, '1648881415047870255', '内业-激光数据预处理/激光数据预处理', 0, 0.87, 3.8314, '0', 600.00, '按最低结算标准');
INSERT INTO `cmc_settle_work` VALUES (1132, '1648881415047870255', '内业-点云分类/激光点云分类', 0, 0.87, 1, '0', 522.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1133, '1648881415047870255', '内业-DOM/DOM制作', 0, 0.87, 1, '0', 652.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (1134, '1648881415047870255', '内业-DEM、地形面/DEM、三维地形面制作', 0, 0.87, 1, '0', 957.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1135, '1648881415047870255', '对比分析报告', 0, 6, 1, NULL, 1260.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1136, '1648881415047870398', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 3, 1.35, '0', 384.80, 'RTK测量、刻石。');
INSERT INTO `cmc_settle_work` VALUES (1137, '1648881415047870255', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 21, 1.3, '0', 10920.00, '3.23-3.29王刚，万龙卿，熊艳华，测区位于新疆哈密，测区高差600多米');
INSERT INTO `cmc_settle_work` VALUES (1138, '1648881415047870398', '外业-高程测量/三角高程测量、单程双测', 0, 2.28, 1.35, '0', 543.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1139, '1648881415047870398', '外业-断面测量/断面测量', 0, 6.6, 1.35, '0', 1176.10, '独曲河同时水面线测量，河道纵断面、同时水面线按 60%计算。');
INSERT INTO `cmc_settle_work` VALUES (1140, '1648881415047870398', '外业-断面测量/断面测量', 0, 3.2, 1.35, '0', 3024.00, '横断面测量');
INSERT INTO `cmc_settle_work` VALUES (1141, '1648881415047870398', '外业-地形图测绘/地形图(激光)测绘', 0, 11, 1.35, '0', 8910.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1142, '1648881415047870416', '内业-坐标转换/坐标系转换', 0, 60, 1, '0', 900.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1143, '1648881415047870416', '库区淹没影响示意图坐标系转换', 0, 1, 1, NULL, 210.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1144, '1648881415047870398', '外业-地形图测绘/地形图(激光)测绘', 0, 21, 1.35, '0', 5103.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1145, '1648881415047870398', '外业-地形图测绘/地形图外业实测', 0, 0.18, 1.35, '0', 729.00, '独曲河水下地形测量');
INSERT INTO `cmc_settle_work` VALUES (1146, '1648881415047870398', '内业-激光数据预处理/激光数据预处理', 0, 32, 1, '0', 1920.00, '按采集比例尺1:2000');
INSERT INTO `cmc_settle_work` VALUES (1147, '1648881415047870311', '外业-地形图测绘/地形图外业实测', 0, 0.51, 1.1, '0', 3534.30, '测区海拔2570m，增加10%');
INSERT INTO `cmc_settle_work` VALUES (1148, '1648881415047870166', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 4, 1, '0', 1200.00, '引测已知点4点');
INSERT INTO `cmc_settle_work` VALUES (1149, '1648881415047870235', '进出场', 0, 37, 1, NULL, 11100.00, '夏志军、凌涛、林姚安、梁成龙、罗友权、郑鹏、尹超、王金浩等人');
INSERT INTO `cmc_settle_work` VALUES (1150, '1648881415047870126', '地形图测绘（人工实测）', 0, 0.023, 1, NULL, 920.00, '外业实测，面积太小，按困难地类');
INSERT INTO `cmc_settle_work` VALUES (1151, '1648881415047870126', '地形图测绘（内业）', 0, 0.023, 1, NULL, 119.00, '面积太小，按困难地类，测绘工程中心内业组完成');
INSERT INTO `cmc_settle_work` VALUES (1152, '1648881415047870126', '化粪池特征点测量', 0, 13, 1, NULL, 234.00, '参照一般地类公路角桩测设计费。');
INSERT INTO `cmc_settle_work` VALUES (1153, '1648881415047870126', '进出场', 0, 6, 1, NULL, 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1154, '1648881415047870231', '内业-坐标转换/坐标系转换', 0, 292, 1, '0', 4380.00, '一共292点。');
INSERT INTO `cmc_settle_work` VALUES (1155, '1648881415047870161', '水下地形图测绘', 0, 2.4, 1, '0', 40800.00, '测绘工程中心测量及编辑');
INSERT INTO `cmc_settle_work` VALUES (1156, '1648881415047870161', '进出场', 0, 4, 1, '0', 1320.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1157, '1648881415047870162', '外业-地形图测绘/地形图(激光)测绘', 0, 0.235, 1, '0', 799.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1158, '1648881415047870162', '内业-激光制图/激光数据制作地形图', 0, 0.235, 1, '0', 646.30, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1159, '1648881415047870162', '外业-其他/无人机航飞', 0, 3, 1, '0', 1080.00, '大黄蜂飞激光');
INSERT INTO `cmc_settle_work` VALUES (1160, '1648881415047870162', '外业-其他/进出场', 0, 8, 1, '0', 2400.00, '赵洪、李仁贵、王刚、王金浩4人');
INSERT INTO `cmc_settle_work` VALUES (1161, '1648881415047870156', '普通水准标石选点与造埋', 0, 10, 1, '0', 1500.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1162, '1648881415047870254', '地质工程师公司承担费用', 0, 27746, 1, '0', 27746.00, '2021年1月-5月工资25600元，交通费用2146元');
INSERT INTO `cmc_settle_work` VALUES (1163, '1648881415047870254', '进出场交通费用', 0, 13387, 1, '0', 13387.00, '2021年进出场交通费用未报销。');
INSERT INTO `cmc_settle_work` VALUES (1164, '1648881415047870254', '三滩大桥地形图测绘', 0, 360, 1, '0', 1440.00, '公司安排');
INSERT INTO `cmc_settle_work` VALUES (1165, '1648881415047870085', '外业-公路测量/公路中桩、角桩测设', 0, 3435, 1.1, '1', 75570.00, '库周交通公路中桩、角桩放测');
INSERT INTO `cmc_settle_work` VALUES (1166, '1648881415047870085', '外业-公路测量/公路参考点测量', 0, 2344, 1.1, '1', 10313.60, '参考点');
INSERT INTO `cmc_settle_work` VALUES (1167, '1648881415047870085', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.895, 1.1, '1', 1594.90, '无人机航测成图。康生寺连接线1:2000地形图（外业）');
INSERT INTO `cmc_settle_work` VALUES (1168, '1648881415047870085', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.093, 1.1, '1', 920.70, '外业实测成图。大石凼特大桥1:500地形图（外业）');
INSERT INTO `cmc_settle_work` VALUES (1169, '1648881415047870209', '农房登记权籍调查及测绘', 0, 13875570, 1, '0', 1179423.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (1170, '1648881415047870211', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 5, 1.35, '1', 9450.00, '新建点');
INSERT INTO `cmc_settle_work` VALUES (1171, '1648881415047870211', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 71, 1.35, '1', 73804.50, '新建点');
INSERT INTO `cmc_settle_work` VALUES (1172, '1648881415047870211', '外业-高程测量/三角高程测量', 0, 29.911, 1.35, '1', 5935.80, '已知点校核');
INSERT INTO `cmc_settle_work` VALUES (1173, '1648881415047870211', '外业-高程测量/三角高程测量、单程双测', 0, 12.51, 1.35, '1', 3475.70, '重点河段高程引测');
INSERT INTO `cmc_settle_work` VALUES (1174, '1648881415047870211', '外业-断面测量/断面测量', 0, 3.185, 0.81, '1', 670.80, '同时水边线测量；系数为1.35*0.6=0.81');
INSERT INTO `cmc_settle_work` VALUES (1175, '1648881415047870211', '外业-断面测量/断面测量', 0, 62.402, 1.35, '1', 21903.10, '横断面测量');
INSERT INTO `cmc_settle_work` VALUES (1176, '1648881415047870211', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 3, 0.81, '1', 3402.00, '利用旧点；系数为1.35*0.6=0.81');
INSERT INTO `cmc_settle_work` VALUES (1177, '1648881415047870211', '朋曲流域涉河建筑物信息统计及建档', 0, 1, 1, '1', 2000.00, '共拍摄了71张照片及相关信息整理。');
INSERT INTO `cmc_settle_work` VALUES (1178, '1648881415047870188', '三维模型制作（外业）', 0, 9.5, 1, '0', 7267.50, '测绘工程中心负责像控点、检查点');
INSERT INTO `cmc_settle_work` VALUES (1179, '1648881415047870188', '倾斜摄影（无人机飞行）', 0, 9.5, 1, '0', 3420.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1180, '1648881415047870188', '内业-三维模型/实景三维模型制作', 0, 9.5, 1, '0', 8930.00, '地理系信息中心完成内业建模');
INSERT INTO `cmc_settle_work` VALUES (1181, '1648881415047870188', '内业-DOM/DOM制作', 0, 9.5, 0.6, '0', 4275.00, '地理系信息中心完成');
INSERT INTO `cmc_settle_work` VALUES (1182, '1648881415047870188', '地址灾害点排查', 0, 50, 1, '0', 900.00, '激光技术部三维模型上处理，参照中桩标准。为满足业主需求，多次修改，合计工天5人天。');
INSERT INTO `cmc_settle_work` VALUES (1183, '1648881415047870188', '现场配合', 0, 20, 1, '0', 7200.00, '安全培训及手续办理');
INSERT INTO `cmc_settle_work` VALUES (1184, '1648881415047870188', '进出场', 0, 6, 1, '0', 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1185, '1648881415047870211', '外业-地形图测绘/地形图(无人机)测绘', 0, 33.1, 1.35, '1', 72389.70, '重点河段');
INSERT INTO `cmc_settle_work` VALUES (1186, '1648881415047870211', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 700.1, 1.35, '1', 192807.50, '非重点河段');
INSERT INTO `cmc_settle_work` VALUES (1187, '1648881415047870211', '内业-航测/地形图航测', 0, 33.1, 1.1, '0', 27307.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (1188, '1648881415047870211', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 700.1, 1.1, '0', 129378.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (1189, '1648881415047870211', '内业-DOM/DOM制作', 0, 33.1, 1, '0', 4965.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1190, '1648881415047870122', '厂址区地形图测绘（外业）', 0, 0.02, 1, NULL, 180.00, '面积太小，按困难地类，无人机外业0.45');
INSERT INTO `cmc_settle_work` VALUES (1191, '1648881415047870122', '饮水线路地形图测绘（外业）', 0, 0.56, 1, NULL, 1915.20, '面积太小，按困难地类，无人机外业0.45');
INSERT INTO `cmc_settle_work` VALUES (1192, '1648881415047870122', '厂址区地形图测绘（内业）', 0, 0.02, 1, NULL, 103.40, '空三增加0.1');
INSERT INTO `cmc_settle_work` VALUES (1193, '1648881415047870122', '饮水线路地形图测绘（内业）', 0, 0.56, 1, NULL, 1108.80, '空三增加0.1');
INSERT INTO `cmc_settle_work` VALUES (1194, '1648881415047870122', '控制点测量', 0, 6, 1, NULL, 600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1195, '1648881415047870122', '无人机航飞', 0, 4, 1, NULL, 1440.00, '罗有权，潘林海，王刚，杨晶');
INSERT INTO `cmc_settle_work` VALUES (1196, '1648881415047870122', '进出场', 0, 14, 1, NULL, 4200.00, '含飞行组');
INSERT INTO `cmc_settle_work` VALUES (1197, '1648881415047870211', '内业-DOM/DOM制作', 0, 700.1, 1, '0', 14002.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1198, '1648881415047870211', '内业-DEM、地形面/DEM、三维地形面制作', 0, 33.1, 1, '0', 6620.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1199, '1648881415047870211', '内业-DEM、地形面/DEM、三维地形面制作', 0, 700.1, 1, '0', 21003.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1200, '1648881415047870211', '外业-其他/进出场', 0, 30, 1, '1', 9900.00, '进场4人*4天 4人*1天，出场6人*1天 2人*2天。');
INSERT INTO `cmc_settle_work` VALUES (1201, '1648881415047870211', '外业-航飞/无人机航飞(飞行项目）', 0, 16, 1, '1', 6400.00, '共计飞行8天*2人。');
INSERT INTO `cmc_settle_work` VALUES (1202, '1648881415047870211', '现场租车', 0, 30, 1, NULL, 21000.00, '现场租赁皮卡车。');
INSERT INTO `cmc_settle_work` VALUES (1203, '1648881415047870211', '外业-其他/配合测量', 0, 27, 1.2, '1', 12960.00, '张书伟2021年负责界桩、界牌委外安装管理费用');
INSERT INTO `cmc_settle_work` VALUES (1204, '1648881415047870254', '二滩水电站大坝外部变形观测及谷坡稳定性监测', 0, 1025800, 1, '0', 1025800.00, '二滩、桐子林两项目委托管理总费用（2019年协定）');
INSERT INTO `cmc_settle_work` VALUES (1205, '1648881415047870085', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.021, 1.1, '1', 207.90, '外业实测成图。太阳河特大桥1:500地形图（外业）');
INSERT INTO `cmc_settle_work` VALUES (1206, '1648881415047870085', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.643, 1.1, '1', 1145.80, '无人机航测成图。太阳河沟交通1:2000地形图（外业）');
INSERT INTO `cmc_settle_work` VALUES (1207, '1648881415047870085', '内业-航测/地形图航测', 0, 0.114, 1.1, '0', 589.40, '测绘工程中心二部内业组完成。');
INSERT INTO `cmc_settle_work` VALUES (1208, '1648881415047870085', '内业-航测/地形图航测', 0, 1.538, 1.1, '0', 1268.90, '测绘工程中心二部内业组完成');
INSERT INTO `cmc_settle_work` VALUES (1209, '1648881415047870128', 'I期-控制点、特征点采集及坐标系统转换', 0, 54, 1, NULL, 1620.00, '采集15、转换15');
INSERT INTO `cmc_settle_work` VALUES (1210, '1648881415047870128', 'I期-平面坐标、高程系统转换互关系建立', 0, 3, 1, NULL, 600.00, 'CGCS2000、广州坐标系、西安80；85国家高程基准、广州高程系');
INSERT INTO `cmc_settle_work` VALUES (1211, '1648881415047870128', 'I期-地形图坐标系统转换', 0, 128, 1, NULL, 1920.00, '广州2000坐标系---广州坐标系。32幅。每幅图按4点计算。');
INSERT INTO `cmc_settle_work` VALUES (1212, '1648881415047870128', 'I期-复甦村公路带状地形图测绘', 0, 0.377, 1, NULL, 8328.50, '外业实测17000、编辑2210，平均带宽40米，增加0.15');
INSERT INTO `cmc_settle_work` VALUES (1213, '1648881415047870128', 'I期-新桥村高程点补测', 0, 146, 1, NULL, 2190.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1214, '1648881415047870128', 'II期-地形图坐标、高程系统转换', 0, 48, 1, NULL, 720.00, '广州2000坐标系---广州坐标系。12幅。每幅图按4点计算。');
INSERT INTO `cmc_settle_work` VALUES (1215, '1648881415047870128', 'II期-控制点、特征点采集及坐标系统转换', 0, 43, 1, NULL, 1290.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1216, '1648881415047870128', 'II期-蔡二村道路地形图补测', 0, 0.014, 1, NULL, 309.30, '外业实测17000、编辑2210，带状，增加0.15');
INSERT INTO `cmc_settle_work` VALUES (1217, '1648881415047870128', 'II期-南村净水厂道路地形图补测', 0, 0.046, 1, NULL, 1016.20, '外业实测17000、编辑2210，带状，增加0.15');
INSERT INTO `cmc_settle_work` VALUES (1218, '1648881415047870128', 'II期-员岗道路地形图补测', 0, 0.022, 1, NULL, 486.00, '外业实测17000、编辑2210，带状，增加0.15');
INSERT INTO `cmc_settle_work` VALUES (1219, '1648881415047870128', '进出场', 0, 4, 1, NULL, 1320.00, '陈尚云按出差结算未统计其进出场');
INSERT INTO `cmc_settle_work` VALUES (1220, '1648881415047870173', '水下地形图测绘', 0, 0.228, 1, NULL, 1839.50, '面积较小，按困难地类，编辑按实测图编辑单价');
INSERT INTO `cmc_settle_work` VALUES (1221, '1648881415047870173', '1:1000地形地类图（内业）', 0, 4.296, 1, NULL, 0.00, '云南分公司完成空三、测图及编辑');
INSERT INTO `cmc_settle_work` VALUES (1222, '1648881415047870173', '新增料场1:1000地形图（外业）', 0, 0.183, 1, NULL, 518.80, '无人机按0.45');
INSERT INTO `cmc_settle_work` VALUES (1223, '1648881415047870173', '新增料场1:1000地形图（内业）', 0, 0.183, 1, NULL, 0.00, '云南分公司完成空三、测图及编辑');
INSERT INTO `cmc_settle_work` VALUES (1224, '1648881415047870173', '控制测量', 0, 9, 1, NULL, 900.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1225, '1648881415047870173', '现场配合测量', 0, 4, 1, NULL, 1440.00, '配合地质专业现场特征点测量，2人配合2天（含司机）');
INSERT INTO `cmc_settle_work` VALUES (1226, '1648881415047870173', '无人机飞行', 0, 6, 1, NULL, 2400.00, '天气不好、两天飞完');
INSERT INTO `cmc_settle_work` VALUES (1227, '1648881415047870173', '进出场', 0, 10, 1, NULL, 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1228, '1648881415047870173', '现场租船', 0, 1, 1, NULL, 800.00, '水下部分租用现场船只实测');
INSERT INTO `cmc_settle_work` VALUES (1229, '1648881415047870259', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.11, 1.15, '0', 967.70, NULL);
INSERT INTO `cmc_settle_work` VALUES (1230, '1648881415047870259', '外业-航飞/无人机航飞(飞行项目）', 0, 1, 1, '0', 400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1231, '1648881415047870259', '外业-其他/进出场', 0, 2, 1, '1', 660.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1232, '1648881415047870259', '坐标转换', 0, 10, 1, '0', 300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1233, '1648881415047870173', '1:1000地形地类图（外业）', 0, 4.296, 1, NULL, 15832.90, '无人机按0.45，地形地类图增加0.3');
INSERT INTO `cmc_settle_work` VALUES (1234, '1648881415047870259', '汽车租赁', 0, 1, 1, '0', 600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1235, '1648881415047870259', '内业-航测/地形图航测', 0, 0.11, 1, '1', 605.00, '小面积测图');
INSERT INTO `cmc_settle_work` VALUES (1236, '1648881415047870085', '外业-其他/配合测量', 0, 32, 1.1, '1', 14080.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1237, '1648881415047870085', '外业-断面测量/断面测量', 0, 2.34, 1.1, '1', 10913.80, '比例尺为1:100，共156条、每条15米，2米一个点。');
INSERT INTO `cmc_settle_work` VALUES (1238, '1648881415047870087', '首部枢纽区进水口三维地形面制作', 0, 2, 1, NULL, 420.00, '面积小，不出工作量建议按人天计费');
INSERT INTO `cmc_settle_work` VALUES (1239, '1648881415047870200', '项目前期试点（内业试生产：实景三维模型）', 0, 2.62, 1, '1', 2882.00, '七星岛片区1.29km²；安博南片区0.80km²；海屯物流片区0.53km²。');
INSERT INTO `cmc_settle_work` VALUES (1240, '1648881415047870200', '项目前期试点（内业试生产：真正射数字正射影像）', 0, 2.62, 1, '1', 2305.60, '按业主要求提供1:500、1:1000、1:2000三种规格真正射影像供选择。');
INSERT INTO `cmc_settle_work` VALUES (1241, '1648881415047870200', '项目前期试点（与业主技术方案沟通等）', 0, 5, 1, '0', 1050.00, '2019年7月19日，3人天；2019年9月6日，2人天；');
INSERT INTO `cmc_settle_work` VALUES (1242, '1648881415047870200', '空域申请', 0, 1, 1.05, NULL, 21000.00, '空域申请费用20000元，由于没有票据，考虑5%开票费用，即系数1.05');
INSERT INTO `cmc_settle_work` VALUES (1243, '1648881415047870200', '项目生产（外业-无人机航飞）', 0, 35, 1, '0', 12600.00, '3月15日-3月18日，15人天；4月12日-4月20日，20人天。');
INSERT INTO `cmc_settle_work` VALUES (1244, '1648881415047870085', '外业-航飞/无人机航飞(飞行项目）', 0, 18, 1, '1', 7200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1245, '1648881415047870085', '外业-其他/进出场', 0, 18, 1, '1', 5940.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1246, '1648881415047870085', '外业-其他/配合测量', 0, 4, 1, '1', 1600.00, '绰斯甲地形图检查');
INSERT INTO `cmc_settle_work` VALUES (1247, '1648881415047870085', '基础设施分公司人员现场食宿费用', 0, 1, 1, NULL, 32000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1248, '1648881415047870085', '民工费', 0, 112, 1, '1', 22400.00, '民工主要工作为带路、背设备、打木桩等。');
INSERT INTO `cmc_settle_work` VALUES (1249, '1648881415047870208', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 10, 1, '0', 1900.00, '实际工作量10个');
INSERT INTO `cmc_settle_work` VALUES (1250, '1648881415047870200', '项目生产（外业-地形图测绘/地形图(无人机)测绘）', 0, 38.17, 0.1, '0', 10821.20, '外业-刺像控点检查点），按标准5% 5%，即系数0.1');
INSERT INTO `cmc_settle_work` VALUES (1251, '1648881415047870200', '项目生产（内业-航测/地形图航测）', 0, 38.17, 0.12, '1', 9618.80, '空三加密，按标准10%，即系数0.1。由于该项目地块非常零散，共计206块，申请增加20%困难系数，即系数为0.12');
INSERT INTO `cmc_settle_work` VALUES (1252, '1648881415047870200', '项目生产（数字正射影像（DOM）制作）', 0, 38.17, 1.2, '1', 16031.40, '该项目地块非常零散，共计206块，遍布青白江区全域，申请增加20%困难系数，即系数为1.2');
INSERT INTO `cmc_settle_work` VALUES (1253, '1648881415047870259', '五等GNSS测量', 0, 4, 1.15, '0', 874.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1254, '1648881415047870208', '外业-航飞/无人机航飞(飞行项目）', 0, 9, 1, '0', 3600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1255, '1648881415047870200', '项目前期试点（外业试生产-无人机航飞）', 0, 11, 1, '0', 3960.00, '2019年7月15日，5人天；2019年8月26日，6人天。');
INSERT INTO `cmc_settle_work` VALUES (1256, '1648881415047870198', '两河口水电站工程测量中心2021年度测绘服务', 0, 1, 1, NULL, 620000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1257, '1648881415047870198', '配合成勘院勘察中心钻孔放样', 0, 1, 1, NULL, 8000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1258, '1648881415047870198', '两河口水电站工程测量中心2020年度测绘服务,补充结算', 0, 1, 1, NULL, 70000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1259, '1648881415047870355', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1.5, '1', 1200.00, '2处');
INSERT INTO `cmc_settle_work` VALUES (1260, '1648881415047870355', '现场租车', 0, 7, 1, '0', 6300.00, '现场租车7天，900元/天（含驾驶员）');
INSERT INTO `cmc_settle_work` VALUES (1261, '1648881415047870355', '外业-其他/进出场', 0, 6, 1, '1', 1980.00, '朱倪强，潘林海，雷泽民3人');
INSERT INTO `cmc_settle_work` VALUES (1262, '1648881415047870379', '外业-高程测量/水准测量', 0, 9.54, 1, '0', 1717.20, '测绘工程中心完成。');
INSERT INTO `cmc_settle_work` VALUES (1263, '1648881415047870379', '外业-高程测量/三角高程测量', 0, 1.81, 1, '0', 228.10, '测绘工程中心完成。');
INSERT INTO `cmc_settle_work` VALUES (1264, '1648881415047870379', '外业-地形图测绘/地形图(激光)测绘', 0, 1.324, 1, '0', 1668.20, '测绘工程中心完成。临溪河综合整治项目');
INSERT INTO `cmc_settle_work` VALUES (1265, '1648881415047870329', '外业飞行（外业工期45天）', 0, 574302.64, 1, '0', 114860.50, '外业');
INSERT INTO `cmc_settle_work` VALUES (1266, '1648881415047870214', '项目成本预结算', 0, 1, 1, NULL, 400000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1267, '1648881415047870329', '正射影像、CAD平面图、建筑物三维模型', 0, 574302.64, 1, '0', 114860.50, '内业');
INSERT INTO `cmc_settle_work` VALUES (1268, '1648881415047870379', '内业-激光制图/激光数据制作地形图', 0, 1.324, 1, '0', 0.00, '德方公司完成。临溪河综合整治项目');
INSERT INTO `cmc_settle_work` VALUES (1269, '1648881415047870221', '双江口水电站枢纽工程测量中心2021年度测绘服务', 0, 1, 1, '1', 587200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1270, '1648881415047870177', '测量中心技术服务（2021年度）', 0, 1.0833, 1, '1', 517600.70, '实际进场及合同生效结算时间为2020年12月1日，结算周期为13个月。');
INSERT INTO `cmc_settle_work` VALUES (1271, '1648881415047870127', '地形图测绘（外业）', 0, 0.53, 1, NULL, 1812.60, '无人机0.45');
INSERT INTO `cmc_settle_work` VALUES (1272, '1648881415047870127', '地形图测绘（内业）', 0, 0.53, 1, NULL, 1049.40, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1273, '1648881415047870127', 'DOM制作', 0, 0.53, 1, NULL, 95.40, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1274, '1648881415047870127', '大断面测量', 0, 3.6, 1, NULL, 3816.00, '18条，均不足200米，按200米计算');
INSERT INTO `cmc_settle_work` VALUES (1275, '1648881415047870127', '无人机飞行', 0, 3, 1, NULL, 1200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1276, '1648881415047870127', '进出场', 0, 6, 1, NULL, 1980.00, '3人（含司机）');
INSERT INTO `cmc_settle_work` VALUES (1277, '1648881415047870379', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 15, 1, '0', 2850.00, '测绘工程中心完成。');
INSERT INTO `cmc_settle_work` VALUES (1278, '1648881415047870379', '外业-地形图测绘/地形图(激光)测绘', 0, 0.017, 1, '0', 57.80, '测绘工程中心完成。临溪河综合整治项目');
INSERT INTO `cmc_settle_work` VALUES (1279, '1648881415047870206', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 31, 1, '1', 23870.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1280, '1648881415047870206', '仪器租赁费', 0, 1, 1, NULL, 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1281, '1648881415047870206', '项目其他费用', 0, 1, 1, NULL, 6518.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1282, '1648881415047870379', '内业-激光制图/激光数据制作地形图', 0, 0.017, 1, '0', 0.00, '德方公司完成。临溪河综合整治项目');
INSERT INTO `cmc_settle_work` VALUES (1283, '1648881415047870379', '外业-地形图测绘/地形图外业实测', 0, 0.117, 1, '0', 737.10, '测绘工程中心完成。');
INSERT INTO `cmc_settle_work` VALUES (1284, '1648881415047870379', '外业-地形图测绘/地形图(激光)测绘', 0, 0.093, 1, '0', 316.20, '测绘工程中心完成。名山百丈镇安置区二期');
INSERT INTO `cmc_settle_work` VALUES (1285, '1648881415047870355', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.03, 1.5, '0', 344.30, NULL);
INSERT INTO `cmc_settle_work` VALUES (1286, '1648881415047870331', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 4, 1, '0', 2640.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1287, '1648881415047870331', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 6, 1, '0', 2376.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1288, '1648881415047870331', '外业-高程测量/水准测量', 0, 13.35, 0.7, '0', 1682.10, '三角高程按水准的70％');
INSERT INTO `cmc_settle_work` VALUES (1289, '1648881415047870331', '外业-地形图测绘/地形图(激光)测绘', 0, 16.445, 1, '0', 9867.00, '成图面积18km²，外业修补测打点面积1.555km²');
INSERT INTO `cmc_settle_work` VALUES (1290, '1648881415047870331', '外业-地形图测绘/地形图外业实测', 0, 1.555, 1, '0', 4665.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1291, '1648881415047870331', '外业-地形图测绘/地形图(激光)测绘', 0, 18, 0.3, '0', 3240.00, '地类图制作，按0.3计算');
INSERT INTO `cmc_settle_work` VALUES (1292, '1648881415047870181', '委托管理费5%', 0, 1, 1, '0', 4982.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1293, '1648881415047870331', '内业-激光制图/激光数据制作地形图', 0, 16.445, 1, '0', 10195.90, '成图面积18km²，外业修补测打点面积1.555km²');
INSERT INTO `cmc_settle_work` VALUES (1294, '1648881415047870331', '内业-编图/地形图数字化', 0, 1.555, 1, '0', 365.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (1295, '1648881415047870169', '慈母溪渡口、雷中坝渡口水下地形图', 0, 0.666, 1, '0', 11322.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1296, '1648881415047870169', '已采挖沙石方量计算', 0, 1, 1, '0', 2000.00, '地理信息中心完成');
INSERT INTO `cmc_settle_work` VALUES (1297, '1648881415047870169', '进出场', 0, 4, 1, '0', 1200.00, '丁亮、夏志军2人进出场 ');
INSERT INTO `cmc_settle_work` VALUES (1298, '1648881415047870208', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1299, '1648881415047870208', '测绘局坐标转换', 0, 1, 1, '0', 300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1300, '1648881415047870432', '外业-地形图测绘/地形图外业实测', 0, 0.092, 1, '0', 276.00, '水下地形');
INSERT INTO `cmc_settle_work` VALUES (1301, '1648881415047870432', '外业-断面测量/断面测量', 0, 1.377, 1, '0', 963.90, 'XR、JW吊桥轴线断面测量');
INSERT INTO `cmc_settle_work` VALUES (1302, '1648881415047870432', '外业-其他/配合测量', 0, 5, 1, '1', 2000.00, '配合地质特征点及收孔测量2人天、现场开会3人天');
INSERT INTO `cmc_settle_work` VALUES (1303, '1648881415047870098', '居民点规划、公路用地图、孔龙垫高施工图、G317用地图、X6890用地、可尔因用地图坐标转换CGCS2000', 0, 92, 0, '0', 1380.00, '分两批提交，10月30日提交一批，11月3日提交一批');
INSERT INTO `cmc_settle_work` VALUES (1304, '1648881415047870432', '租车', 0, 7, 1, '0', 7700.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1305, '1648881415047870432', '租车油费', 0, 1, 1, '0', 1173.90, NULL);
INSERT INTO `cmc_settle_work` VALUES (1306, '1648881415047870432', '外业-其他/进出场', 0, 6, 1, '1', 1980.00, '赵 洪、廖绍毅、赵程鸿3人，ML项目出发，进出场各1天；');
INSERT INTO `cmc_settle_work` VALUES (1307, '1648881415047870169', '莫中坝水下地形图', 0, 0.264, 1, '0', 4488.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1308, '1648881415047870208', '外业-地形图测绘/地形图(激光)测绘', 0, 11.2, 1, '0', 6720.00, '2000像控、调绘、检查');
INSERT INTO `cmc_settle_work` VALUES (1309, '1648881415047870208', '外业-地形图测绘/地形图(激光)测绘', 0, 11, 1, '0', 1980.00, '5000像控、调绘、检查');
INSERT INTO `cmc_settle_work` VALUES (1310, '1648881415047870208', '项目协调管理', 0, 6, 1, '0', 1260.00, '航测遥感中心');
INSERT INTO `cmc_settle_work` VALUES (1311, '1648881415047870157', '地形图测绘（外业）', 0, 14.56, 1, '0', 19656.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1312, '1648881415047870157', '数字正射影像（DOM）、数字线划专用图（DLG）、数字高程模型（DEM）制作', 0, 14.56, 1, '0', 17108.00, '地形图航测及粗编750，空山增加0.1，DEM制作200；DOM制作150');
INSERT INTO `cmc_settle_work` VALUES (1313, '1648881415047870145', '金川水电站工程测量中心劳务配合（2021年度）', 0, 1, 1, NULL, 465000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1314, '1648881415047870157', '数据入库', 0, 14.56, 1.5, '0', 5132.40, '按复杂地类增加0.5系数');
INSERT INTO `cmc_settle_work` VALUES (1315, '1648881415047870180', '金川水电站工程测量中心劳务配合（变更项目）', 0, 1, 1, '1', 193194.50, '金川测量中心从2019年~2021年共与业主完成变更立项工作7项。');
INSERT INTO `cmc_settle_work` VALUES (1316, '1648881415047870157', '图集制作', 0, 8, 1, '0', 1680.00, '地理信息中心完成、31幅图');
INSERT INTO `cmc_settle_work` VALUES (1317, '1648881415047870157', '河道大断面测量', 0, 41.67, 1, '1', 10834.20, '110条，植被茂密，交通不便，按困难地类');
INSERT INTO `cmc_settle_work` VALUES (1318, '1648881415047870157', '界桩（牌）测设', 0, 49, 1, '0', 5390.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1319, '1648881415047870157', '界桩（牌）测设', 0, 31, 1, '0', 1705.00, '电子桩，按实体桩单价0.5执行。');
INSERT INTO `cmc_settle_work` VALUES (1320, '1648881415047870157', '管理线桩制作、运输及安装', 0, 45, 1, '0', 20700.00, '混凝土界桩45座');
INSERT INTO `cmc_settle_work` VALUES (1321, '1648881415047870157', '告示牌制作、运输及安装', 0, 4, 1, '0', 5600.00, '告示牌4座');
INSERT INTO `cmc_settle_work` VALUES (1322, '1648881415047870157', '航空摄影（无人机飞行）', 0, 36, 1, '0', 12960.00, '天气不好，等待及补飞；张学仪 王刚 周建伟3人12天');
INSERT INTO `cmc_settle_work` VALUES (1323, '1648881415047870157', '配合工作', 0, 8, 1, '0', 2880.00, '评审会议2人天（杨为康、夏小晴，1天）、验收会议6人天（刘洋、邓锡权，3天）');
INSERT INTO `cmc_settle_work` VALUES (1324, '1648881415047870157', '资料整理', 0, 10, 1, '0', 2100.00, '甲方调整设计洪水位等，资料修改');
INSERT INTO `cmc_settle_work` VALUES (1325, '1648881415047870157', '现场租车', 0, 19, 1, '0', 9500.00, '作业人员用车，含油费');
INSERT INTO `cmc_settle_work` VALUES (1326, '1648881415047870157', '其他开支', 0, 1, 1, '0', 43580.00, 'CORS中心高程转换费1500（测区高差大，增加转换点数）；专家评审费共4000；水文计算分析30000；专家验收费6');
INSERT INTO `cmc_settle_work` VALUES (1327, '1648881415047870157', '进出场', 0, 16, 1, '0', 4800.00, '含埋桩2人进出场');
INSERT INTO `cmc_settle_work` VALUES (1328, '1648881415047870392', '内业-航测/地形图航测', 0, 0.067, 1.1, '0', 400.00, '按标准结算为346.4元，不足400元按400元。');
INSERT INTO `cmc_settle_work` VALUES (1329, '1648881415047870432', '外业-地形图测绘/地形图外业实测', 0, 0.109, 1, '0', 1853.00, 'XR吊桥0.038km²，JW吊桥0.071km²；');
INSERT INTO `cmc_settle_work` VALUES (1330, '1648881415047870107', '外业租车', 0, 1, 1, '0', 10000.00, '现场未安排公司车辆，租车开展工作。');
INSERT INTO `cmc_settle_work` VALUES (1331, '1648881415047870222', '现场开会及验收', 0, 1, 1, '0', 15000.00, '新增狮子口水库、上白水河、中白水河三条河流”');
INSERT INTO `cmc_settle_work` VALUES (1332, '1648881415047870222', '8条河流结算总金额', 0, 1, 1, '0', 643130.00, '8条河流共计结算金额为108万元，已经结算43.6870万元元，该笔费用为剩余结算金额');
INSERT INTO `cmc_settle_work` VALUES (1333, '1648881415047870222', '内业-编图/地形图数字化', 0, 12, 1, '0', 2820.00, '新增狮子口水库、上白水河、中白水河三条河流（内业）');
INSERT INTO `cmc_settle_work` VALUES (1334, '1648881415047870222', '内业-DEM、地形面/DEM、三维地形面制作', 0, 12, 1, '0', 2400.00, '新增狮子口水库、上白水河、中白水河三条河流（内业）');
INSERT INTO `cmc_settle_work` VALUES (1335, '1648881415047870222', '内业-DOM/DOM制作', 0, 12, 1, '0', 1800.00, '新增狮子口水库、上白水河、中白水河三条河流（内业）');
INSERT INTO `cmc_settle_work` VALUES (1336, '1648881415047870222', '内业-航测/地形图航测', 0, 12, 1, '0', 9000.00, '新增狮子口水库、上白水河、中白水河三条河流（内业）');
INSERT INTO `cmc_settle_work` VALUES (1337, '1648881415047870219', '四川大渡河双江口水电站枢纽工程测量中心2022年度测绘服务', 0, 1, 1, NULL, 587200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1338, '1648881415047870191', '外业-航飞/无人机航飞(飞行项目）', 0, 21, 1, '0', 8400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1339, '1648881415047870191', '外业-地形图测绘/地形图(激光)测绘', 0, 15.38, 1, '0', 52292.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1340, '1648881415047870191', '批文办理', 0, 1, 1, '0', 10500.00, '空域批文费用。');
INSERT INTO `cmc_settle_work` VALUES (1341, '1648881415047870191', '内业-激光制图/激光数据制作地形图', 0, 10.38, 1, '0', 28545.00, '总面积15.38km²，本公司做了10.38km²委外5km²。');
INSERT INTO `cmc_settle_work` VALUES (1342, '1648881415047870222', '洪水分析', 0, 1, 1, '0', 50000.00, '洪水分析“新增狮子口水库、上白水河、中白水河三条河流”');
INSERT INTO `cmc_settle_work` VALUES (1343, '1648881415047870191', '外业-其他/进出场', 0, 14, 1, '0', 4200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1344, '1648881415047870191', '合作单位协调管理等现场工作', 0, 17, 1, '0', 6120.00, '尹超等');
INSERT INTO `cmc_settle_work` VALUES (1345, '1648881415047870345', '外业-其他/配合测量', 0, 56, 1.25, '0', 25200.00, '2人*28天');
INSERT INTO `cmc_settle_work` VALUES (1346, '1648881415047870191', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 18, 1, '0', 3420.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1347, '1648881415047870345', '外业-其他/进出场', 0, 4, 1, '0', 1200.00, '2人*2天');
INSERT INTO `cmc_settle_work` VALUES (1348, '1648881415047870393', '外业-地形图测绘/地形图外业实测', 0, 0.25, 1, '0', 4250.00, '双江口测量中心人工实测');
INSERT INTO `cmc_settle_work` VALUES (1349, '1648881415047870393', '外业-航飞/无人机航飞(飞行项目）', 0, 3, 1, '0', 1200.00, '王刚一人完成，时间5月10-5月14（含进出场），现场工作3人天');
INSERT INTO `cmc_settle_work` VALUES (1350, '1648881415047870393', '外业-其他/配合测量', 0, 10, 1, '0', 3600.00, '郑鹏现场同委外单位一起开展工作');
INSERT INTO `cmc_settle_work` VALUES (1351, '1648881415047870393', '委外管理', 0, 1, 1, '0', 1000.00, '委外管理及资料整编');
INSERT INTO `cmc_settle_work` VALUES (1352, '1648881415047870393', '外业-其他/进出场', 0, 4, 1, '0', 1200.00, '郑鹏、王刚2人');
INSERT INTO `cmc_settle_work` VALUES (1353, '1648881415047870323', '内业-激光数据预处理/激光数据预处理', 0, 1, 1, '0', 600.00, '汉源县城主次干路车载激光数据处理；实际成图面积0.650，按最低标准结算');
INSERT INTO `cmc_settle_work` VALUES (1354, '1648881415047870323', '内业-激光数据预处理/激光数据预处理', 0, 1, 1, '0', 600.00, '裸露边坡、万里工业园地形图测绘，实际成图面积0.480，按最低标准结算');
INSERT INTO `cmc_settle_work` VALUES (1355, '1648881415047870242', '2022年第1次结算', 0, 0.3, 1, '0', 883239.10, '结算比例30%');
INSERT INTO `cmc_settle_work` VALUES (1356, '1648881415047870242', '2022年第2次结算', 0, 0.3, 1, '0', 538293.10, '结算比例30%');
INSERT INTO `cmc_settle_work` VALUES (1357, '1648881415047870242', '2022年第3次结算', 0, 0.3, 1, '0', 460366.10, '结算比例30%');
INSERT INTO `cmc_settle_work` VALUES (1358, '1648881415047870323', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 15, 1, '0', 6000.00, '机载激光扫描6人天、车载激光扫描3人天，进出场6人天');
INSERT INTO `cmc_settle_work` VALUES (1359, '1648881415047870323', '激光采集组现场住宿费', 0, 1, 1, '0', 792.00, '3人5天（含进出场），激光组现场住宿4天，按人均分摊');
INSERT INTO `cmc_settle_work` VALUES (1360, '1648881415047870323', '外业-其他/配合测量', 0, 2, 1, '0', 720.00, '平面及高程转换模型计算，现场采集21点，2人天');
INSERT INTO `cmc_settle_work` VALUES (1361, '1648881415047870323', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 800.00, '移民增收项目1:200地形图测绘倾斜摄影');
INSERT INTO `cmc_settle_work` VALUES (1362, '1648881415047870323', '外业-其他/进出场', 0, 8, 1, '0', 2400.00, '测绘工程中心参与人员4人');
INSERT INTO `cmc_settle_work` VALUES (1363, '1648881415047870427', '项目管理费用', 0, 1, 1, NULL, 32500.00, '包含王明阳7.17-8.27共计42天（未报差旅）。现场沟通协调管理费用，按合同额200万（测绘 勘测定界）预估，1');
INSERT INTO `cmc_settle_work` VALUES (1364, '1648881415047870427', '机票退票费用', 0, 1, 1, NULL, 1816.00, '由于疫情影响，临时退票，扣除的手续费用');
INSERT INTO `cmc_settle_work` VALUES (1365, '1648881415047870445', '大渡河猴子岩水电站外部变形监测工程（2023年）最末次结算', 0, 0.3, 1, '0', 0.00, '5241161.94元为2023年经最终竣工结算审定后甲方支付的合同额，部门按该合同额的30%比例申请办理内部结算，');
INSERT INTO `cmc_settle_work` VALUES (1366, '1648881415047870337', '外业-断面测量/断面测量', 0, 13, 1, '1', 0.00, '委外完成');
INSERT INTO `cmc_settle_work` VALUES (1367, '1648881415047870337', '外业-断面测量/断面测量', 0, 6.4, 1, '1', 0.00, '委外完成');
INSERT INTO `cmc_settle_work` VALUES (1368, '1648881415047870337', '外业-地形图测绘/地形图(无人机)测绘', 0, 7.6, 1, '1', 0.00, '委外完成');
INSERT INTO `cmc_settle_work` VALUES (1369, '1648881415047870337', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.85, 1, '1', 0.00, '委外完成');
INSERT INTO `cmc_settle_work` VALUES (1370, '1648881415047870148', '内业-编图/地形图数字化', 0, 118.66, 1, '0', 78315.60, '地形图入库');
INSERT INTO `cmc_settle_work` VALUES (1371, '1648881415047870163', '成德大道桥～成绵乐高铁桥河段地形图测绘（内业）', 0, 3.81, 1, '0', 7543.80, '不含水下，航测遥感中心完成，航测成图，空三增加10%');
INSERT INTO `cmc_settle_work` VALUES (1372, '1648881415047870163', '成德大道桥～成绵乐高铁桥河段水下地形图测绘', 0, 1.07, 1, '0', 6741.00, '测绘工程中心数据采集及编辑');
INSERT INTO `cmc_settle_work` VALUES (1373, '1648881415047870163', '两闸址地形图测绘（外业）', 0, 2.1, 1, '0', 16065.00, '不含水下，航测成图按0.45计算');
INSERT INTO `cmc_settle_work` VALUES (1374, '1648881415047870163', '两闸址地形图测绘（内业）', 0, 2.1, 1, '0', 10857.00, '不含水下，航测遥感中心完成，航测成图，空三增加10%');
INSERT INTO `cmc_settle_work` VALUES (1375, '1648881415047870163', '两闸址水下地形图测绘', 0, 0.41, 1, '0', 6970.00, '测绘工程中心数据采集及编辑');
INSERT INTO `cmc_settle_work` VALUES (1376, '1648881415047870163', '横断面测量', 0, 65.27, 1, '0', 45689.00, '98条');
INSERT INTO `cmc_settle_work` VALUES (1377, '1648881415047870163', '横断面测量', 0, 13.15, 1, '0', 7495.50, '16条');
INSERT INTO `cmc_settle_work` VALUES (1378, '1648881415047870163', '外业-断面测量/断面测量', 0, 44, 0.5, '0', 1980.00, '刻石标志按 50%计算；');
INSERT INTO `cmc_settle_work` VALUES (1379, '1648881415047870163', '三维模型制作', 0, 5.5, 1, '0', 5170.00, '按地形图航测标准0.2执行，地理信息中心完成');
INSERT INTO `cmc_settle_work` VALUES (1380, '1648881415047870163', '五等GNSS测量', 0, 10, 1, '0', 1900.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1381, '1648881415047870163', '成德大道桥～成绵乐高铁桥河段地形图测绘（外业）', 0, 3.81, 1, '0', 10801.40, '不含水下，航测按0.45');
INSERT INTO `cmc_settle_work` VALUES (1382, '1648881415047870163', '高程系统转换', 0, 1, 1, '0', 500.00, '测绘局转换85高程系');
INSERT INTO `cmc_settle_work` VALUES (1383, '1648881415047870163', '现场租车', 0, 12, 1, '0', 6000.00, '含油费  ');
INSERT INTO `cmc_settle_work` VALUES (1384, '1648881415047870163', '无人机飞行', 0, 9, 1, '0', 3240.00, '激光技术部飞行6人天，丁亮飞行3人天');
INSERT INTO `cmc_settle_work` VALUES (1385, '1648881415047870163', '进出场', 0, 12, 1, '0', 3600.00, '丁亮、陈建贤、李仁贵、王刚、王金浩、夏志军，6人进出场（只统计一次进场）');
INSERT INTO `cmc_settle_work` VALUES (1386, '1648881415047870150', '外业-地形图测绘/地形图(无人机)测绘', 0, 29.84, 1, '0', 40284.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1387, '1648881415047870150', '数字正射影像（DOM）', 0, 29.84, 1.5, '0', 6714.00, '部分区域利用新飞影像重新制作');
INSERT INTO `cmc_settle_work` VALUES (1388, '1648881415047870150', '数字高程模型（DEM）', 0, 29.84, 1, '0', 5968.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1389, '1648881415047870150', 'GNSS测量', 0, 2, 1, '0', 600.00, '利用旧点两点');
INSERT INTO `cmc_settle_work` VALUES (1390, '1648881415047870150', 'GNSS测量', 0, 18, 1, '0', 9000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1391, '1648881415047870150', '界桩、界牌及告示牌测设', 0, 147, 1, '0', 16170.00, '界桩395个（实体桩112个，电子桩283个）；告示牌35个');
INSERT INTO `cmc_settle_work` VALUES (1392, '1648881415047870150', '界桩、界牌及告示牌测设', 0, 283, 0.5, '0', 15565.00, '界桩395个（实体桩112个，电子桩283个）；告示牌35个，电子桩按50％计费');
INSERT INTO `cmc_settle_work` VALUES (1393, '1648881415047870150', '民工', 0, 1, 1, '0', 16100.00, '搬运及埋设界桩与告示牌');
INSERT INTO `cmc_settle_work` VALUES (1394, '1648881415047870150', '租车', 0, 1, 1, '0', 9276.00, '运输界桩与告示牌、现场人员用车及租车产生的油料费');
INSERT INTO `cmc_settle_work` VALUES (1395, '1648881415047870150', '界桩、告示牌制作', 0, 1, 1, '0', 66930.00, '界桩制作费用25300，指示牌制作费用34300');
INSERT INTO `cmc_settle_work` VALUES (1396, '1648881415047870131', '内业-编图/地形图数字化', 0, 0.712, 1, '0', 469.90, '航测遥感中心承担，按总面积0.89*0.8算。');
INSERT INTO `cmc_settle_work` VALUES (1397, '1648881415047870131', '外业-断面测量/断面测量', 0, 2.066, 1.1, '1', 1568.10, '11条断面');
INSERT INTO `cmc_settle_work` VALUES (1398, '1648881415047870131', '外业-其他/进出场', 0, 24, 1, '1', 7920.00, '地形图测绘，8人*2天；控制测量4人*2天。');
INSERT INTO `cmc_settle_work` VALUES (1399, '1648881415047870131', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 8, 1.1, '1', 6776.00, '未下控制测量任务。');
INSERT INTO `cmc_settle_work` VALUES (1400, '1648881415047870131', '外业-高程测量/三角高程测量、单程双测', 0, 3.217, 1.1, '1', 951.20, '未下控制测量任务。');
INSERT INTO `cmc_settle_work` VALUES (1401, '1648881415047870125', '调查配合测量', 0, 12, 1, '0', 4320.00, '现场配合工作');
INSERT INTO `cmc_settle_work` VALUES (1402, '1648881415047870125', '进出场', 0, 6, 1, '0', 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1403, '1648881415047870150', '无人机飞行', 0, 30, 1, '0', 10800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1404, '1648881415047870150', '配合验收', 0, 2, 1, '0', 720.00, '杨永恒、周建伟各1天，不含进出场');
INSERT INTO `cmc_settle_work` VALUES (1405, '1648881415047870131', '外业-地形图测绘/地形图外业实测', 0, 0.712, 1.1, '1', 5952.30, '修补测，外业实测按总面积0.89*0.8算。');
INSERT INTO `cmc_settle_work` VALUES (1406, '1648881415047870150', '进出场', 0, 52, 1, '0', 15600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1407, '1648881415047870150', '内业-编图/地形图数字化', 0, 29.84, 1.4, '0', 9817.40, '编图入库，测区地物较为复杂，增加0.4');
INSERT INTO `cmc_settle_work` VALUES (1408, '1648881415047870166', '地形图测量（外业）', 0, 32.2, 1, '0', 43470.00, '像控点、检查点、调绘');
INSERT INTO `cmc_settle_work` VALUES (1409, '1648881415047870166', '地形图测量（内业）', 0, 32.2, 1, '0', 26565.00, '航测遥感中心完成，空三增加0.1。');
INSERT INTO `cmc_settle_work` VALUES (1410, '1648881415047870166', '外业-公路测量/公路控制网点土建', 0, 21, 1, '0', 3150.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1411, '1648881415047870207', '孔玉乡泥洛河坝地形图测绘', 0, 0.1, 1, NULL, 841.50, '无人机按45%计算');
INSERT INTO `cmc_settle_work` VALUES (1412, '1648881415047870207', '孔玉乡菩提河坝地形图测绘', 0, 0.1, 1, NULL, 841.50, '无人机按45%计算');
INSERT INTO `cmc_settle_work` VALUES (1413, '1648881415047870207', '孔玉乡折洛沟新取水口及引水线路地形图测绘', 0, 0.1, 1, NULL, 841.50, '无人机按45%计算');
INSERT INTO `cmc_settle_work` VALUES (1414, '1648881415047870207', '内业-航测/地形图航测', 0, 0.276, 1.1, '0', 1426.90, '空三增加系数0.1');
INSERT INTO `cmc_settle_work` VALUES (1415, '1648881415047870207', '进出场', 0, 6, 1, NULL, 1800.00, '王刚、黄安堂、张波。往返为：2*3=6');
INSERT INTO `cmc_settle_work` VALUES (1416, '1648881415047870160', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 21, 1, '0', 10500.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1417, '1648881415047870160', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 21, 1, '0', 3990.00, '一级GNSS');
INSERT INTO `cmc_settle_work` VALUES (1418, '1648881415047870160', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 22, 1, '0', 4180.00, '二级GNSS，按五等计费');
INSERT INTO `cmc_settle_work` VALUES (1419, '1648881415047870279', '内业-激光制图/激光数据制作地形图', 0, 11.68, 1, '0', 7241.60, '其中任务书面积6.8，替换原成图范围面积4.88，航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1420, '1648881415047870327', '空域申请', 0, 1, 1, '0', 20000.00, '激光技术中心办理');
INSERT INTO `cmc_settle_work` VALUES (1421, '1648881415047870327', '外业-公路测量/公路中桩、角桩测设', 0, 25, 1, '0', 450.00, '洪痕点测量');
INSERT INTO `cmc_settle_work` VALUES (1422, '1648881415047870327', '外业-其他/进出场', 0, 18, 1, '0', 5400.00, '9人*2次');
INSERT INTO `cmc_settle_work` VALUES (1423, '1648881415047870327', '外业-航飞/无人机航飞(飞行项目）', 0, 3, 1, '0', 1200.00, '码头区无人机飞行，3人*1天。');
INSERT INTO `cmc_settle_work` VALUES (1424, '1648881415047870371', '外业-其他/配合测量', 0, 6, 1, '0', 2160.00, '演练提前踏勘及视频录制：赵洪、黄书豪2人3天，含进出场。');
INSERT INTO `cmc_settle_work` VALUES (1425, '1648881415047870371', '外业-地形图测绘/地形图(激光)测绘', 0, 1.1, 0.05, '0', 187.00, '不做DLG像控点、检查点按5％计算。');
INSERT INTO `cmc_settle_work` VALUES (1426, '1648881415047870371', '外业-其他/配合测量', 0, 26, 1, '0', 9360.00, '应急演练：院里组织出发视频拍摄5人1天，第一次现场演练3人3天、第二次现场演练3人4天');
INSERT INTO `cmc_settle_work` VALUES (1427, '1648881415047870371', '外业-航飞/无人机航飞(飞行项目）', 0, 9, 1, '0', 3600.00, '点云、影像获取3人3天');
INSERT INTO `cmc_settle_work` VALUES (1428, '1648881415047870290', '内业-航测/地形图航测', 0, 2.69, 1.1, '1', 6213.90, '含空三加密');
INSERT INTO `cmc_settle_work` VALUES (1429, '1648881415047870290', '外业-其他/进出场', 0, 8, 1, '0', 2400.00, '4人*2天');
INSERT INTO `cmc_settle_work` VALUES (1430, '1648881415047870290', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '0', 1600.00, '2人*2天');
INSERT INTO `cmc_settle_work` VALUES (1431, '1648881415047870371', '外业-其他/进出场', 0, 20, 1, '0', 6000.00, '应急演练第一次赵洪、何杰、康科伟3人，应急演练第二次赵洪、潘林海、张波3人，航飞丁亮、黄书豪、张杰、凌');
INSERT INTO `cmc_settle_work` VALUES (1432, '1648881415047870371', '委外费用支付', 0, 1, 1, '0', 6500.00, '借款支付委外费用');
INSERT INTO `cmc_settle_work` VALUES (1433, '1648881415047870327', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.95, 1, '0', 7267.50, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1434, '1648881415047870295', '泸县2021年耕地“进出平衡”目标考核整改专项工作', 0, 1, 1, '0', 114480.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1435, '1648881415047870279', '内业-激光制图/激光数据制作地形图', 0, 23.9, 1, '0', 5736.00, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1436, '1648881415047870279', '外业-地形图测绘/地形图(激光)测绘', 0, 11.68, 1, '0', 7008.00, '激光技术中心完成，2023.3.9-2023.3.12');
INSERT INTO `cmc_settle_work` VALUES (1437, '1648881415047870279', '外业-地形图测绘/地形图(激光)测绘', 0, 12.22, 1, '0', 2199.60, '激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (1438, '1648881415047870279', '高程模型转换', 0, 1, 1, NULL, 330.00, '高程模型转换费用');
INSERT INTO `cmc_settle_work` VALUES (1439, '1648881415047870279', '内业-激光数据预处理/激光数据预处理', 0, 23.9, 1, '0', 1434.00, '飞行外协');
INSERT INTO `cmc_settle_work` VALUES (1440, '1648881415047870284', '地形图测绘', 0, 0.95, 1, '0', 4465.00, '利用已有资料航测成图');
INSERT INTO `cmc_settle_work` VALUES (1441, '1648881415047870284', '水下地形图测绘', 0, 0.23, 1.1, '0', 4301.00, '丁亮无人船作业，平均海拔2786米，增加 10%');
INSERT INTO `cmc_settle_work` VALUES (1442, '1648881415047870284', '水下地形图测绘', 0, 0.33, 1.1, '0', 2286.90, '丁亮无人船作业，平均海拔2786米，增加 10%');
INSERT INTO `cmc_settle_work` VALUES (1443, '1648881415047870284', '内业-DOM/DOM制作', 0, 1.18, 1, '0', 885.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1444, '1648881415047870284', '内业-DOM/DOM制作', 0, 12, 1, '0', 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1445, '1648881415047870284', '1:500内业-DEM、地形面/DEM、三维地形面制作', 0, 1.18, 1, '0', 1298.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1446, '1648881415047870284', '1:2000内业-DEM、地形面/DEM、三维地形面制作', 0, 12, 1, '0', 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1447, '1648881415047870284', '1:2000调绘、检查点', 0, 11.79, 0.4455, '0', 15757.30, '平均海拔2786米，增加 10%');
INSERT INTO `cmc_settle_work` VALUES (1448, '1648881415047870284', '1:500调绘、检查点', 0, 0.95, 0.4455, '0', 7194.80, '平均海拔2786米，增加 10%');
INSERT INTO `cmc_settle_work` VALUES (1449, '1648881415047870284', '调绘\\检查点进出场', 0, 6, 1, '0', 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1450, '1648881415047870284', '水下测量进出场', 0, 6, 1, '0', 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1451, '1648881415047870415', '外业-公路测量/公路中桩、角桩测设', 0, 460, 1, '1', 9200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1452, '1648881415047870284', '地形图测绘', 0, 11.79, 1, '0', 8842.50, '利用已有资料航测成图');
INSERT INTO `cmc_settle_work` VALUES (1453, '1648881415047870415', '外业-公路测量/公路中桩、角桩测设', 0, 182, 0.2, '1', 728.00, '公路参考点按20％计算');
INSERT INTO `cmc_settle_work` VALUES (1454, '1648881415047870415', '外业-其他/配合测量', 0, 2, 1, '1', 800.00, '现场按甲方意思去拍照取样，2人1天');
INSERT INTO `cmc_settle_work` VALUES (1455, '1648881415047870415', '现场租车', 0, 1, 1, NULL, 2700.00, '现场租用车辆6天，单价450（含驾驶员）');
INSERT INTO `cmc_settle_work` VALUES (1456, '1648881415047870298', '内业-激光数据预处理/激光数据预处理', 0, 16.86, 1, '0', 1011.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (1457, '1648881415047870298', '内业-激光制图/激光数据制作地形图', 0, 14.86, 1, '0', 9213.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (1458, '1648881415047870298', '内业-航测/地形图航测', 0, 2, 1, '0', 1500.00, '测区内城镇区域采用立体测图方式完成');
INSERT INTO `cmc_settle_work` VALUES (1459, '1648881415047870298', '测绘局坐标转换费用', 0, 1, 1, NULL, 300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1460, '1648881415047870298', '采集住宿费用', 0, 1, 1, NULL, 2000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1461, '1648881415047870298', '外业-地形图测绘/地形图(激光)测绘', 0, 1, 1, '0', 0.00, '地形图调绘工作由委外单位完成');
INSERT INTO `cmc_settle_work` VALUES (1462, '1648881415047870298', '项目管理费', 0, 2, 1, NULL, 420.00, '外协管理。');
INSERT INTO `cmc_settle_work` VALUES (1463, '1648881415047870415', '交通分院现场开支', 0, 1, 1, NULL, 13273.60, '现场支付交通分院人员开支，按人数比例分配');
INSERT INTO `cmc_settle_work` VALUES (1464, '1648881415047870390', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 5, 1, '0', 2000.00, '王刚2022.12.29-2023.01.02');
INSERT INTO `cmc_settle_work` VALUES (1465, '1648881415047870296', '内业-航测/地形图航测', 0, 0.09, 1.1, '0', 465.30, '含空三加密');
INSERT INTO `cmc_settle_work` VALUES (1466, '1648881415047870296', '外业-航飞/无人机航飞(飞行项目）', 0, 1, 1, '0', 400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1467, '1648881415047870160', '外业-高程测量/水准测量', 0, 127.64, 1, '0', 22975.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (1468, '1648881415047870160', '外业-地形图测绘/地形图(激光)测绘', 0, 2.265, 1.2, '0', 9241.20, '调绘补测内容多，增加难度系数0.2');
INSERT INTO `cmc_settle_work` VALUES (1469, '1648881415047870160', '外业-其他/配合测量', 0, 16, 1, '0', 5760.00, '三次质量站检查，现场配合');
INSERT INTO `cmc_settle_work` VALUES (1470, '1648881415047870160', '内业-编图/地形图数字化', 0, 2.625, 0.3, '0', 1480.50, '按地形图编绘30%');
INSERT INTO `cmc_settle_work` VALUES (1471, '1648881415047870160', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 24, 1, '0', 9600.00, '3人8天');
INSERT INTO `cmc_settle_work` VALUES (1472, '1648881415047870160', '激光采集人员上机费', 0, 13, 1, NULL, 2496.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1473, '1648881415047870160', '购买连续运行基站数据 配件 快递费', 0, 1, 1, NULL, 6000.00, '含购买基站费用4000');
INSERT INTO `cmc_settle_work` VALUES (1474, '1648881415047870160', '租车费', 0, 8, 1, NULL, 4800.00, '飞行地方和架基站离的很远 必须要两个车');
INSERT INTO `cmc_settle_work` VALUES (1475, '1648881415047870160', '内业-激光数据预处理/激光数据预处理', 0, 43.53, 1, '0', 7835.40, '按内业点云分类30%');
INSERT INTO `cmc_settle_work` VALUES (1476, '1648881415047870160', '项目管理费', 0, 1, 1, '0', 7500.00, '监管2家外协单位，主合同额约0.25%。');
INSERT INTO `cmc_settle_work` VALUES (1477, '1648881415047870160', '外业-其他/进出场', 0, 32, 1, '0', 9600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1478, '1648881415047870189', '外业-高程测量/跨河水准（501-999m）', 0, 1, 1, '1', 2280.00, '跨河距离大于等于500m，按困难地类');
INSERT INTO `cmc_settle_work` VALUES (1479, '1648881415047870189', '进出场', 0, 2, 1, '0', 660.00, '陈尚云按出差报账，未统计');
INSERT INTO `cmc_settle_work` VALUES (1480, '1648881415047870176', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.31, 1.1, '1', 1166.20, '无人机飞行航测');
INSERT INTO `cmc_settle_work` VALUES (1481, '1648881415047870176', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.03, 1.1, '1', 297.00, '无人机飞行航测');
INSERT INTO `cmc_settle_work` VALUES (1482, '1648881415047870176', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.1, 1.1, '1', 990.00, '无人机飞行航测');
INSERT INTO `cmc_settle_work` VALUES (1483, '1648881415047870176', '外业-地形图测绘/地形图外业实测', 0, 0.09, 1.1, '1', 1980.00, '外业实测');
INSERT INTO `cmc_settle_work` VALUES (1484, '1648881415047870176', '内业-航测/地形图航测', 0, 0.22, 1.1, '0', 1137.40, '航测遥感中心完成，空三加密。');
INSERT INTO `cmc_settle_work` VALUES (1485, '1648881415047870189', '外业-高程测量/跨河水准（大于1000m）', 0, 1, 1, '1', 3420.00, '跨河距离大于1000m，按困难地类增加50%计算');
INSERT INTO `cmc_settle_work` VALUES (1486, '1648881415047870176', '内业-航测/地形图航测', 0, 0.31, 1.1, '0', 613.80, '航测遥感中心完成，空三加密。');
INSERT INTO `cmc_settle_work` VALUES (1487, '1648881415047870176', '外业-其他/配合测量', 0, 4, 1, '0', 1440.00, '配合测量4人天，松岗直波大地广场范围高程点测量。');
INSERT INTO `cmc_settle_work` VALUES (1488, '1648881415047870176', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '1', 1600.00, '2人*2天');
INSERT INTO `cmc_settle_work` VALUES (1489, '1648881415047870176', '外业-其他/进出场', 0, 8, 1, '1', 2640.00, '4人*2天');
INSERT INTO `cmc_settle_work` VALUES (1490, '1648881415047870176', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.031, 1.1, '1', 306.90, '后期新增工作，年克寺对外连接线，李锋负责。');
INSERT INTO `cmc_settle_work` VALUES (1491, '1648881415047870176', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '1', 800.00, '后期新增工作，李锋负责。2人*1天。');
INSERT INTO `cmc_settle_work` VALUES (1492, '1648881415047870176', '内业-航测/地形图航测', 0, 0.031, 1.1, '0', 160.30, '后期新增工作，航测遥感中心完成，空三加密。');
INSERT INTO `cmc_settle_work` VALUES (1493, '1648881415047870210', '内业-DOM/DOM制作', 0, 169.8, 1, '0', 3396.00, '航测遥感中心完成。非重点河段、困难河段DOM制作');
INSERT INTO `cmc_settle_work` VALUES (1494, '1648881415047870210', '内业-DEM、地形面/DEM、三维地形面制作', 0, 66.63, 1, '0', 1998.90, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1495, '1648881415047870210', '内业-航测/地形图航测', 0, 109.87, 1.1, '0', 3021.40, '困难河段1:5万地形图测绘，因成勘院调整测绘范围，含多余测绘范围为6.07km²。');
INSERT INTO `cmc_settle_work` VALUES (1496, '1648881415047870210', '内业-DEM、地形面/DEM、三维地形面制作', 0, 103.17, 1, '0', 928.50, '1:5万');
INSERT INTO `cmc_settle_work` VALUES (1497, '1648881415047870210', '界桩外业测设', 0, 400, 1.2, '1', 15360.00, '界桩委外，现场管理协调工作。');
INSERT INTO `cmc_settle_work` VALUES (1498, '1648881415047870210', '内业-航测/地形图航测', 0, 72.7, 1.1, '0', 7997.00, '航测遥感中心完成，含空三加密。因成勘院调整测绘范围，含多余测绘范围为6.07km²。');
INSERT INTO `cmc_settle_work` VALUES (1499, '1648881415047870158', '界桩制作埋设', 0, 580, 1, '1', 92800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1500, '1648881415047870158', '临时界桩测设', 0, 1008, 1, '1', 11088.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1501, '1648881415047870158', '1:1000地形图测绘', 0, 8.932, 1, '0', 0.00, '委托管理（王小刚完成）');
INSERT INTO `cmc_settle_work` VALUES (1502, '1648881415047870158', '内业-DEM、地形面/DEM、三维地形面制作', 0, 8.932, 1, '0', 4019.40, '航测遥感中心完成。三维地形面制作用于量算用地图斑表面积。');
INSERT INTO `cmc_settle_work` VALUES (1503, '1648881415047870158', '表面积测量（地理信息中心）', 0, 3, 1, '0', 630.00, '表面积测量（地理信息中心）');
INSERT INTO `cmc_settle_work` VALUES (1504, '1648881415047870158', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 4, 0.6, '1', 1848.00, '利用旧点');
INSERT INTO `cmc_settle_work` VALUES (1505, '1648881415047870158', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 8, 1, '1', 6160.00, '新建点');
INSERT INTO `cmc_settle_work` VALUES (1506, '1648881415047870158', '外业-高程测量/三角高程测量', 0, 16.8, 1, '1', 2469.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (1507, '1648881415047870158', '外业-其他/进出场', 0, 10, 1, '1', 3300.00, '杨振、邓锡全、杨晶、杨永恒、程昊。');
INSERT INTO `cmc_settle_work` VALUES (1508, '1648881415047870158', '民工受伤住院治疗及善后', 0, 1, 1, '1', 16624.70, '实际善后处理了20800,。保险理赔费用4175.29元。');
INSERT INTO `cmc_settle_work` VALUES (1509, '1648881415047870158', '永久桩、加密桩测设（挪桩）', 0, 270, 1, '1', 29700.00, '甲方原因导致额外工作量');
INSERT INTO `cmc_settle_work` VALUES (1510, '1648881415047870158', '界桩制作埋设（新制桩）', 0, 59, 1, '1', 9440.00, '甲方原因导致额外工作量');
INSERT INTO `cmc_settle_work` VALUES (1511, '1648881415047870184', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 57, 1.2, '0', 27360.00, '王刚，朱倪强，张波三人19天。高差四百多米。');
INSERT INTO `cmc_settle_work` VALUES (1512, '1648881415047870184', '外业-其他/配合测量', 0, 24, 1, '0', 3000.00, '华测技术员现场开支');
INSERT INTO `cmc_settle_work` VALUES (1513, '1648881415047870184', '内业-激光数据预处理/激光数据预处理', 0, 45.553, 1, '0', 8199.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (1514, '1648881415047870248', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 3, 0.75, '1', 3150.00, '利用旧点；系数为1.25*0.6=0.75。');
INSERT INTO `cmc_settle_work` VALUES (1515, '1648881415047870248', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 9, 1.25, '1', 15750.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1516, '1648881415047870248', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 72, 1.25, '1', 69300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1517, '1648881415047870248', '外业-导线测量/导线测量、三等单程双测高程', 0, 130, 1.25, '1', 57200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1518, '1648881415047870184', '内业-三维模型/实景三维模型制作', 0, 45.553, 0.6, '0', 32114.90, '地理信息中心完成');
INSERT INTO `cmc_settle_work` VALUES (1519, '1648881415047870248', '外业-导线测量/导线测量、四等高程', 0, 66, 1.25, '1', 23595.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1520, '1648881415047870248', '外业-导线测量/导线测量、四等单程双测高程', 0, 44.6, 1.25, '1', 17171.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1521, '1648881415047870248', '外业-地形图测绘/地形图(无人机)测绘', 0, 6.79, 1.25, '1', 13749.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (1522, '1648881415047870248', '内业-航测/地形图航测', 0, 6.79, 1.1, '0', 5601.80, '测绘工程中心内业组完成，含空三加密，系数为1.1。尼西坝址1.223km²、尼西厂址0.403km²、德吉坝址0.898km²');
INSERT INTO `cmc_settle_work` VALUES (1523, '1648881415047870248', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 6.24, 1.25, '1', 3432.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1524, '1648881415047870248', '内业-航测/地形图航测', 0, 6.24, 1.1, '0', 1510.10, '测绘工程中心内业组完成，含空三加密，系数为1.1。觉拉闸址1.289km²、觉拉厂址4.947km²');
INSERT INTO `cmc_settle_work` VALUES (1525, '1648881415047870248', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 387.37, 1.25, '1', 98779.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (1526, '1648881415047870248', '内业-航测/地形图航测', 0, 387.37, 1.1, '0', 42610.70, '航测遥感中心完成，含空三加密，系数为1.1。');
INSERT INTO `cmc_settle_work` VALUES (1527, '1648881415047870248', '内业-比例尺缩放/地形图比例尺缩放', 0, 0.303, 1, '1', 49.80, '因玉麦厂址无法航测，利用1:10000地形图放大成图。');
INSERT INTO `cmc_settle_work` VALUES (1528, '1648881415047870248', '外业-断面测量/断面测量', 0, 158.482, 0.75, '1', 30904.00, '纵断面测量。系数为1.25*0.6=0.75。加波曲段11.751km、洛 曲段59.827km、西巴霞曲段86.874km。');
INSERT INTO `cmc_settle_work` VALUES (1529, '1648881415047870248', '外业-航飞/无人机航飞(飞行项目）', 0, 28, 1.25, '1', 14000.00, '西巴霞巴三个项目的无人机飞行报在一起，共14天*2人。');
INSERT INTO `cmc_settle_work` VALUES (1530, '1648881415047870248', '外业-其他/配合测量', 0, 72, 1.25, '1', 36000.00, '谢金成现场查勘12天；杨振、罗友权、张书伟在江达县共隔离4天（12人.天）、刘洋、廖友福、谢金成、朱倪强在');
INSERT INTO `cmc_settle_work` VALUES (1531, '1648881415047870248', '外业-其他/进出场', 0, 33, 1.25, '1', 13612.50, '进场3人*4天（乘车） 7人*1天（乘飞机）；出场8人*1天（乘飞机） 2人*3天（乘飞机）。');
INSERT INTO `cmc_settle_work` VALUES (1532, '1648881415047870248', '现场租车', 0, 62, 1, NULL, 43400.00, '为满足项目工期，在现场租赁了2辆汽车，租车时间分别为44日、18日。');
INSERT INTO `cmc_settle_work` VALUES (1533, '1648881415047870158', '永久桩、加密桩测设', 0, 580, 1, '1', 63800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1534, '1648881415047870184', '外业-其他/进出场', 0, 6, 1, '1', 1980.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1535, '1648881415047870166', '外业-公路测量/公路控制网点土建', 0, 50, 1, '0', 5000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1536, '1648881415047870166', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 21, 1, '0', 10500.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1537, '1648881415047870166', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 50, 1, '0', 9500.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1538, '1648881415047870225', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 4, 0.6, '0', 1584.00, '利用旧点');
INSERT INTO `cmc_settle_work` VALUES (1539, '1648881415047870225', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 4, 1, '0', 2640.00, '新建控制点');
INSERT INTO `cmc_settle_work` VALUES (1540, '1648881415047870184', '空域', 0, 1, 1, '0', 33000.00, '申请空域费用，杨卫办理30000、机场协调等。');
INSERT INTO `cmc_settle_work` VALUES (1541, '1648881415047870412', '委外（杨山林）', 0, 1, 0, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1542, '1648881415047870386', '外业-地形图测绘/地形图(激光)测绘', 0, 21.297, 0.3, '0', 3833.50, '2022年项目变更增加地类图制作，按30％计算，测绘工程中心完成外业');
INSERT INTO `cmc_settle_work` VALUES (1543, '1648881415047870386', '外业-地形图测绘/地形图(激光)测绘', 0, 0.85, 1, '0', 510.00, '其中石料场0.70km²，灰岩料场0.15km²；内业中水德方完成；');
INSERT INTO `cmc_settle_work` VALUES (1544, '1648881415047870386', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 5, 1, '0', 950.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1545, '1648881415047870316', '外业-其他/配合测量', 0, 15, 1, '0', 5400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1546, '1648881415047870380', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.856, 1, '0', 6548.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (1547, '1648881415047870380', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 8, 0.5, '0', 760.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1548, '1648881415047870380', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 800.00, '2人*1天');
INSERT INTO `cmc_settle_work` VALUES (1549, '1648881415047870404', '坐标转换费用', 0, 1, 1, NULL, 300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1550, '1648881415047870404', '项目管理费', 0, 1, 1, NULL, 2137.00, '合同额71266元，按合同额3%');
INSERT INTO `cmc_settle_work` VALUES (1551, '1648881415047870412', '德方子公司完成部分', 0, 1, 0, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1552, '1648881415047870386', '坐标转换', 0, 1, 1, '0', 500.00, '测绘局高程转换费用');
INSERT INTO `cmc_settle_work` VALUES (1553, '1648881415047870404', '外业-高程测量/水准测量', 0, 0, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (1554, '1648881415047870360', '外业-地形图测绘/地形图外业实测', 0, 0.37, 1.25, '0', 7862.50, '197块错车道，现场3人，工作13天，累计39人天');
INSERT INTO `cmc_settle_work` VALUES (1555, '1648881415047870354', '外业-断面测量/断面测量', 0, 1.82, 1, '0', 1274.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1556, '1648881415047870354', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '0', 1600.00, '2处');
INSERT INTO `cmc_settle_work` VALUES (1557, '1648881415047870354', '外业-其他/进出场', 0, 8, 1, '0', 2400.00, '夏志军、何涛、刘轩庭、邓锡全4人参与项目');
INSERT INTO `cmc_settle_work` VALUES (1558, '1648881415047870412', '云南子公司完成部分', 0, 1, 0, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1559, '1648881415047870386', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '0', 1600.00, '2处，一处2人天');
INSERT INTO `cmc_settle_work` VALUES (1560, '1648881415047870386', '外业-其他/进出场', 0, 14, 1, '0', 4200.00, '地形图部分杨为康、李旭、刘轩庭、陈建贤4人，地类图部分赵洪、雷佳川、凌涛3人；');
INSERT INTO `cmc_settle_work` VALUES (1561, '1648881415047870412', '两河口测量中心完成部分', 0, 1, 1, '0', 39355.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (1562, '1648881415047870380', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1563, '1648881415047870386', '内业-激光制图/激光数据制作地形图', 0, 21.297, 0.3, '0', 3961.20, '2022年项目变更增加地类图制作，按30％计算，航测遥感中心完成内业');
INSERT INTO `cmc_settle_work` VALUES (1564, '1648881415047870412', '地理信息中心完成部分', 0, 1, 1, '0', 7975.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (1565, '1648881415047870412', '航测遥感中心完成部分', 0, 1, 1, '0', 78117.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1566, '1648881415047870380', '内业-航测/地形图航测', 0, 0.856, 1.1, '0', 4425.50, '航测遥感中心完成，空三加密。');
INSERT INTO `cmc_settle_work` VALUES (1567, '1648881415047870372', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 39, 1, '0', 15600.00, '吴振/王刚/司机、2023.12.10-2023.12.22，天气下雨');
INSERT INTO `cmc_settle_work` VALUES (1568, '1648881415047870351', '地形图测绘（委外）', 0, 6.1, 1, '0', 0.00, '委外测图');
INSERT INTO `cmc_settle_work` VALUES (1569, '1648881415047870404', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 0, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (1570, '1648881415047870351', '内业-委外管理', 0, 5, 1, '0', 1050.00, '航测遥感中心空三及检查后整改、委外管理，按5人天计算；');
INSERT INTO `cmc_settle_work` VALUES (1571, '1648881415047870404', '外业-地形图测绘/地形图(激光)测绘', 0, 0, 1, '0', 0.00, '委外，地形地类图制作，不含激光分类');
INSERT INTO `cmc_settle_work` VALUES (1572, '1648881415047870351', '内业-编图/地形图数字化', 0, 5.1, 0.7, '0', 838.90, '航测遥感中心利用公共资源（五万精度）制作');
INSERT INTO `cmc_settle_work` VALUES (1573, '1648881415047870351', '外业-地形图测绘/地形图(无人机)测绘', 0, 6.1, 1, '0', 8235.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1574, '1648881415047870351', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 1, '0', 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1575, '1648881415047870351', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 2, 1, '0', 600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1576, '1648881415047870351', '外业-高程测量/水准测量', 0, 5.885, 0.98, '0', 1038.10, '三角高程按0.7计算，单程双测增加40％；');
INSERT INTO `cmc_settle_work` VALUES (1577, '1648881415047870351', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1578, '1648881415047870351', '外业-其他/进出场', 0, 10, 1, '0', 3000.00, '赵洪、丁亮、黄建春、康科伟、张波5人参与');
INSERT INTO `cmc_settle_work` VALUES (1579, '1648881415047870412', '激光技术中心完成部分', 0, 1, 1, '0', 22872.30, NULL);
INSERT INTO `cmc_settle_work` VALUES (1580, '1648881415047870412', '测绘工程中心完成部分', 0, 1, 1, '0', 320115.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (1581, '1648881415047870287', '内业-其他/配合测量', 0, 4, 1, '0', 840.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1582, '1648881415047870371', '内业-DEM、地形面/DEM、三维地形面制作', 0, 1.1, 1, '0', 495.00, '地理信息中心完成');
INSERT INTO `cmc_settle_work` VALUES (1583, '1648881415047870371', '内业-DOM/DOM制作', 0, 1.1, 1, '0', 825.00, '地理信息中心完成');
INSERT INTO `cmc_settle_work` VALUES (1584, '1648881415047870371', '内业-三维模型/实景三维模型制作', 0, 1.1, 1, '0', 1292.50, '地理信息中心完成');
INSERT INTO `cmc_settle_work` VALUES (1585, '1648881415047870371', '第一张图（快拼影像）、着色点云', 0, 2, 1, '0', 420.00, '地理信息中心完成');
INSERT INTO `cmc_settle_work` VALUES (1586, '1648881415047870288', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.583, 1, '0', 4460.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1587, '1648881415047870288', '外业-地形图测绘/地形图外业实测', 0, 0.081, 1, '0', 1377.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1588, '1648881415047870288', '内业-航测/地形图航测', 0, 0.664, 1.1, '0', 3432.90, '测绘工程中心完成（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (1589, '1648881415047870288', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 800.00, '2人*1天');
INSERT INTO `cmc_settle_work` VALUES (1590, '1648881415047870288', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '3人*2天');
INSERT INTO `cmc_settle_work` VALUES (1591, '1648881415047870327', '内业-航测/地形图航测', 0, 0.95, 1.1, '0', 0.00, '云南子公司完成（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (1592, '1648881415047870287', '外业-其他/配合测量', 0, 8, 1, '0', 2880.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1593, '1648881415047870327', '外业-地形图测绘/地形图(激光)测绘', 0, 13.75, 1, '0', 8250.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1594, '1648881415047870327', '外业-地形图测绘/地形图外业实测', 0, 12.02, 1, '0', 36060.00, '测绘工程中心完成（水下地形测量）');
INSERT INTO `cmc_settle_work` VALUES (1595, '1648881415047870293', '外业-其他/配合测量', 0, 6, 1.1, '1', 2640.00, '根据甲方指定位置零星测量，人工测量了高程点，道路等，建议按配合测量统计，项目组3人，2天，海拔2610，增');
INSERT INTO `cmc_settle_work` VALUES (1596, '1648881415047870327', '内业-编图/地形图数字化', 0, 12.02, 1, '0', 2824.70, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1597, '1648881415047870327', '内业-航测/地形图航测', 0, 25.77, 1.1, '0', 0.00, '云南子公司完成（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (1598, '1648881415047870327', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 39, 1, '0', 15600.00, '激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (1599, '1648881415047870327', '内业-激光数据预处理/激光数据预处理', 0, 25.77, 1, '0', 1546.20, '激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (1600, '1648881415047870327', '激光技术中心住宿费', 0, 1, 1, '0', 2160.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1601, '1648881415047870290', '外业-地形图测绘/地形图(无人机)测绘', 0, 2.69, 1, '1', 9199.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (1602, '1648881415047870290', '外业-地形图测绘/地形图外业实测', 0, 0.5, 1, '0', 3150.00, '水下地形，无人船测量');
INSERT INTO `cmc_settle_work` VALUES (1603, '1648881415047870290', '内业-编图/地形图数字化', 0, 0, 0.6, '0', 0.00, '水下地形编图');
INSERT INTO `cmc_settle_work` VALUES (1604, '1648881415047870290', '外业-公路测量/公路中桩、角桩测设', 0, 6, 0.5, '0', 54.00, '井盖三维数据，6个点');
INSERT INTO `cmc_settle_work` VALUES (1605, '1648881415047870120', '外业-施控网土建/观测墩选埋', 0, 3, 1, '1', 6000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1606, '1648881415047870120', '外业-施控网土建/水准点选埋', 0, 4, 1, '1', 1600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1607, '1648881415047870120', '外业-施控网土建/水准基点选埋', 0, 3, 1, '1', 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1608, '1648881415047870120', '外业-GNSS、控制网测量/GNSS增加一倍观测时间、利用旧点', 0, 6, 1, '1', 4071.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (1609, '1648881415047870120', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 20, 0.6, '1', 10440.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1610, '1648881415047870120', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 0.6, '1', 3132.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1611, '1648881415047870120', '外业-导线测量/导线测量、四等高程', 0, 13, 1, '1', 6760.00, '二等边长观测，38条');
INSERT INTO `cmc_settle_work` VALUES (1612, '1648881415047870120', '外业-高程测量/三角高程测量、单程双测', 0, 13, 1, '1', 3494.40, '困难地区，代替三等三角高程（单程双测）增加 60%');
INSERT INTO `cmc_settle_work` VALUES (1613, '1648881415047870120', '外业-高程测量/水准测量(爬山、洞内）', 0, 10.04, 1, '1', 4216.80, '困难地区，爬山水准、洞内水准增加60%～100%（本项目为爬山水准，取增加80%）');
INSERT INTO `cmc_settle_work` VALUES (1614, '1648881415047870120', '外业-其他/配合测量', 0, 5, 1, '1', 2000.00, '现场交点');
INSERT INTO `cmc_settle_work` VALUES (1615, '1648881415047870120', '外业-其他/进出场', 0, 30, 1, '1', 10800.00, '周全、高强、刘轩庭、彭永红、康科伟等5人，去3天，返回3天。5*6=30');
INSERT INTO `cmc_settle_work` VALUES (1616, '1648881415047870090', 'GNSS观测（B级网）', 0, 6, 1, '1', 6552.00, '非合同类项目，由公司副总工陈总和马总提议增加。');
INSERT INTO `cmc_settle_work` VALUES (1617, '1648881415047870090', '协助技术质量部编写本项目投标文件。', 0, 5, 1, '1', 1050.00, '见附件1，参与人：高强。共计5天，按照210元每天。');
INSERT INTO `cmc_settle_work` VALUES (1618, '1648881415047870090', '压力钢管永久变形监测网校核项目', 0, 1, 1, '1', 224500.00, '按合同额的25%计费，不再报销其它费用。');
INSERT INTO `cmc_settle_work` VALUES (1619, '1648881415047870388', '内业-航测/地形图航测', 0, 0.179, 1.1, '0', 0.00, '委外完成。牛棚子沟泥石流治理范围。');
INSERT INTO `cmc_settle_work` VALUES (1620, '1648881415047870253', '外业-地形图测绘/地形图(激光)测绘', 0, 11.72, 1, '0', 0.00, '激光采集1:1000，外协');
INSERT INTO `cmc_settle_work` VALUES (1621, '1648881415047870253', '外业-地形图测绘/地形图(激光)测绘', 0, 0.33, 1, '0', 0.00, '外协');
INSERT INTO `cmc_settle_work` VALUES (1622, '1648881415047870253', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 12, 0, '0', 0.00, '外协');
INSERT INTO `cmc_settle_work` VALUES (1623, '1648881415047870253', '内业-DEM、地形面/DEM、三维地形面制作', 0, 0.33, 1, '0', 148.50, '激光技术中心');
INSERT INTO `cmc_settle_work` VALUES (1624, '1648881415047870253', '内业-DEM、地形面/DEM、三维地形面制作', 0, 11.72, 1, '0', 820.40, '激光技术中心');
INSERT INTO `cmc_settle_work` VALUES (1625, '1648881415047870253', '项目管理费', 0, 1, 1, '0', 2700.00, '外协合同额90375，按3%的合同额');
INSERT INTO `cmc_settle_work` VALUES (1626, '1648881415047870388', '外业-地形图测绘/地形图外业实测', 0, 0.025, 1, '0', 425.00, '测绘工程中心完成。菩提河坝安置场地');
INSERT INTO `cmc_settle_work` VALUES (1627, '1648881415047870388', '外业-地形图测绘/地形图外业实测', 0, 0.014, 1, '0', 88.20, '测绘工程中心完成。菩提河坝安置场地工程堆渣场');
INSERT INTO `cmc_settle_work` VALUES (1628, '1648881415047870388', '外业-地形图测绘/地形图外业实测', 0, 0.045, 1, '0', 283.50, '测绘工程中心完成。长河坝水电站磨子沟取水口');
INSERT INTO `cmc_settle_work` VALUES (1629, '1648881415047870388', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 800.00, '2人*1天');
INSERT INTO `cmc_settle_work` VALUES (1630, '1648881415047870388', '外业-其他/进出场', 0, 8, 1, '0', 2400.00, '4人*2天');
INSERT INTO `cmc_settle_work` VALUES (1631, '1648881415047870336', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 20, 1.25, '0', 12500.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1632, '1648881415047870336', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 3, 1.25, '0', 712.50, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1633, '1648881415047870336', '外业-高程测量/三角高程测量、单程双测', 0, 34.1, 1.25, '0', 7519.10, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1634, '1648881415047870398', '陕西测绘局坐标转换费用', 0, 1, 1, NULL, 520.00, '坐标转换跑腿费');
INSERT INTO `cmc_settle_work` VALUES (1635, '1648881415047870398', '内业-激光制图/激光数据制作地形图', 0, 11, 1.3, '0', 8866.00, '地形地类图增加30%');
INSERT INTO `cmc_settle_work` VALUES (1636, '1648881415047870398', '内业-激光制图/激光数据制作地形图', 0, 21, 1, '0', 5040.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1637, '1648881415047870398', '内业-编图/地形图数字化', 0, 11, 1.2, '0', 792.00, '1:2000缩编为1:5000，缩小按 120%。');
INSERT INTO `cmc_settle_work` VALUES (1638, '1648881415047870398', '内业-DEM、地形面/DEM、三维地形面制作', 0, 11, 1, '0', 2200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1639, '1648881415047870398', '内业-DEM、地形面/DEM、三维地形面制作', 0, 32, 1, '0', 2240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1640, '1648881415047870398', '外业-其他/进出场', 0, 15, 1, '0', 4500.00, '5人3天，含驾驶员1人');
INSERT INTO `cmc_settle_work` VALUES (1641, '1648881415047870398', '激光组住宿', 0, 1, 1, NULL, 800.00, '按现场实际住宿');
INSERT INTO `cmc_settle_work` VALUES (1642, '1648881415047870336', '外业-地形图测绘/地形图(激光)测绘', 0, 9.1, 1.25, '0', 14332.50, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1643, '1648881415047870393', '断面测量（委外）', 0, 18, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1644, '1648881415047870393', '同时水边线测量（委外）', 0, 18, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1645, '1648881415047870393', '五等断面基点（委外）', 0, 115, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1646, '1648881415047870393', '内业-编图/地形图数字化', 0, 0.25, 1, '0', 470.00, '航测遥感中心数字化');
INSERT INTO `cmc_settle_work` VALUES (1647, '1648881415047870336', '内业-激光制图/激光数据制作地形图', 0, 9.1, 1, '0', 10738.00, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1648, '1648881415047870107', '三维内业成图（1:500）', 0, 3.009, 1, '0', 22567.50, '老旧城区、带状（航测遥感中心完成）');
INSERT INTO `cmc_settle_work` VALUES (1649, '1648881415047870107', '地形图编辑（1:500）', 0, 34.925, 1, '0', 46310.60, '老旧城区、带状（航测遥感中心和测绘工程中心内业组完成）');
INSERT INTO `cmc_settle_work` VALUES (1650, '1648881415047870107', '外业地形图补测（1:500）', 0, 574, 1, '0', 344400.00, '老旧城区、带状、零星补测，外业按天结算');
INSERT INTO `cmc_settle_work` VALUES (1651, '1648881415047870107', '外业进出场交通图', 0, 1, 1, '0', 18281.00, '实际机票费用（本项目进出场交通费未报账）');
INSERT INTO `cmc_settle_work` VALUES (1652, '1648881415047870431', '外业-其他/进出场', 0, 10, 1, '0', 3000.00, '夏志军、赵明焱、熊艳华、王刚、潘林海5人参与');
INSERT INTO `cmc_settle_work` VALUES (1653, '1648881415047870315', '内业-编图/地形图数字化', 0, 0.192, 1, '0', 126.70, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1654, '1648881415047870315', '外业-地形图测绘/地形图外业实测', 0, 16.147, 1.25, '0', 18165.40, '测绘工程中心完成（水下地形测量）');
INSERT INTO `cmc_settle_work` VALUES (1655, '1648881415047870315', '内业-编图/地形图数字化', 0, 16.147, 1, '0', 968.80, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1656, '1648881415047870315', '内业-比例尺缩放/地形图比例尺缩放', 0, 16.147, 0.7, '0', 3187.40, '航测遥感中心完成1:5000放大为1:2000');
INSERT INTO `cmc_settle_work` VALUES (1657, '1648881415047870315', '外业-其他/配合测量', 0, 64, 1, '1', 25600.00, '4人*15天（准备相关资料、安全考试） 1人*4天（查勘）。');
INSERT INTO `cmc_settle_work` VALUES (1658, '1648881415047870315', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '1', 800.00, '2人*1天');
INSERT INTO `cmc_settle_work` VALUES (1659, '1648881415047870367', '内业-激光制图/激光数据制作地形图', 0, 1, 1, '0', 1180.00, '日衣变形体地形图测绘（航测遥感中心）');
INSERT INTO `cmc_settle_work` VALUES (1660, '1648881415047870315', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 4, 1.25, '0', 1500.00, '测绘工程中心完成（利用旧点）');
INSERT INTO `cmc_settle_work` VALUES (1661, '1648881415047870427', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 1, '1', 3480.00, '第一次作业范围');
INSERT INTO `cmc_settle_work` VALUES (1662, '1648881415047870427', '外业-高程测量/三角高程测量', 0, 21.276, 1, '1', 3127.60, '第一次作业范围');
INSERT INTO `cmc_settle_work` VALUES (1663, '1648881415047870427', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 20, 1, '1', 4000.00, '第二次作业范围');
INSERT INTO `cmc_settle_work` VALUES (1664, '1648881415047870427', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 67, 1, '0', 26800.00, '朱倪强，万龙卿，周建伟7.29-8.4（7天）中途范围变化，王刚、董旭鹏8.26-9.16（23天）');
INSERT INTO `cmc_settle_work` VALUES (1665, '1648881415047870297', '外业-地形图测绘/地形图外业实测', 0, 0.02, 1, '0', 340.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1666, '1648881415047870297', '内业-编图/地形图数字化', 0, 1, 1, '0', 400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1667, '1648881415047870297', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 3, 1, '0', 570.00, '未联测已有控制点');
INSERT INTO `cmc_settle_work` VALUES (1668, '1648881415047870297', '外业-高程测量/三角高程测量', 0, 0.636, 1, '0', 80.10, '内部串联');
INSERT INTO `cmc_settle_work` VALUES (1669, '1648881415047870292', '2021年度变更调查', 0, NULL, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1670, '1648881415047870414', '四川省脚木足河巴拉水电站工程测量中心技术服务(2023年)', 0, 1, 1, NULL, 477000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1671, '1648881415047870427', '外业-地形图测绘/地形图(激光)测绘', 0, 41.43, 0.45, '0', 63387.90, '外业调绘及检查点测量工作计0.9，光伏再按0.5系数');
INSERT INTO `cmc_settle_work` VALUES (1672, '1648881415047870427', '内业-激光数据预处理/激光数据预处理', 0, 50.93, 1, '0', 9167.40, '两次采集总面积');
INSERT INTO `cmc_settle_work` VALUES (1673, '1648881415047870427', '内业-激光制图/激光数据制作地形图', 0, 10.46, 0.5, '0', 14382.50, '第一次范围，航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1674, '1648881415047870390', '采集人员现场住宿', 0, 1, 1, NULL, 320.00, '按现场实际住宿');
INSERT INTO `cmc_settle_work` VALUES (1675, '1648881415047870427', '内业-激光制图/激光数据制作地形图', 0, 15.41, 0.5, '0', 21188.80, '第二次范围，航测遥感中心完成；其他15.56km²外协完成');
INSERT INTO `cmc_settle_work` VALUES (1676, '1648881415047870271', '内业-编图/地形图数字化', 0, 0, 1, '0', 0.00, '按结算标准，已包含在第一项。');
INSERT INTO `cmc_settle_work` VALUES (1677, '1648881415047870271', '外业-其他/进出场', 0, 2, 1, '0', 600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1678, '1648881415047870395', '现场租车', 0, 10, 1, '0', 8000.00, '现场地形图校核租车，单价含驾驶员及油费');
INSERT INTO `cmc_settle_work` VALUES (1679, '1648881415047870395', '民工', 0, 7, 1, '0', 2100.00, '现场请民工搬运材料设备，带路找飞机');
INSERT INTO `cmc_settle_work` VALUES (1680, '1648881415047870395', '燃油费（无票）', 0, 1, 1, '0', 5740.00, '忠玉乡无加油站，私人加油无发票');
INSERT INTO `cmc_settle_work` VALUES (1681, '1648881415047870395', '外业-航飞/无人机航飞(飞行项目）', 0, 15, 1.15, '0', 6900.00, '王刚、朱倪强、周建伟3人，其中天气不好1天，范围调整，1天飞行数据无效');
INSERT INTO `cmc_settle_work` VALUES (1682, '1648881415047870272', '外业-其他/配合测量', 0, 12, 1, '0', 4320.00, '3人*4天');
INSERT INTO `cmc_settle_work` VALUES (1683, '1648881415047870377', '外业-施控网土建/观测墩选埋', 0, 8, 1, '1', 16000.00, '三等观测墩，测区未施工建设。');
INSERT INTO `cmc_settle_work` VALUES (1684, '1648881415047870377', '外业-施控网土建/平面点选埋', 0, 6, 1, '1', 2400.00, '三等砼标，测区未施工建设。');
INSERT INTO `cmc_settle_work` VALUES (1685, '1648881415047870377', '外业-施控网土建/水准基点选埋', 0, 7, 1, '1', 5600.00, '测区未施工建设。');
INSERT INTO `cmc_settle_work` VALUES (1686, '1648881415047870377', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 5, 1, '0', 1980.00, '利用5个旧点。');
INSERT INTO `cmc_settle_work` VALUES (1687, '1648881415047870377', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 14, 0.6, '0', 5544.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1688, '1648881415047870377', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 1, '0', 4380.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1689, '1648881415047870377', '外业-高程测量/水准测量', 0, 103.58, 1, '0', 43503.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (1690, '1648881415047870377', '外业-高程测量/跨河水准（500m以内）', 0, 1, 1, '0', 1730.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1691, '1648881415047870377', '外业-其他/进出场', 0, 18, 1, '0', 5400.00, '9人*2天');
INSERT INTO `cmc_settle_work` VALUES (1692, '1648881415047870297', '外业-其他/进出场', 0, 2, 1, '0', 600.00, '2人');
INSERT INTO `cmc_settle_work` VALUES (1693, '1648881415047870395', '外业-其他/进出场', 0, 22, 1, '1', 7260.00, 'ML项目进场，杨为康、刘轩庭、黄建春、罗友权4人，1次进场完成5000相控；2次进场开展控制、调绘等工作；王');
INSERT INTO `cmc_settle_work` VALUES (1694, '1648881415047870323', '移民增收项目地形图测绘（内业）', 0, 18, 1, '0', 3780.00, '航测遥感中心完成：约65栋，标注高程点约1200点，2人采集5天；地理信息中心完成：31566m2，2人，4天。按人');
INSERT INTO `cmc_settle_work` VALUES (1695, '1648881415047870323', '内业-激光制图/激光数据制作地形图', 0, 0.48, 1, '0', 1320.00, '裸露边坡0.350，万里工业园区范家沟道路0.130');
INSERT INTO `cmc_settle_work` VALUES (1696, '1648881415047870427', '内业-DOM/DOM制作', 0, 15.41, 0.6, '0', 2773.80, '未分幅；其他15.56km²外协完成');
INSERT INTO `cmc_settle_work` VALUES (1697, '1648881415047870427', '项目成本费用', 0, 1, 1, NULL, 7842.50, '现场与博州勘测院商务费用以及李旭现场开销费用');
INSERT INTO `cmc_settle_work` VALUES (1698, '1648881415047870427', '坐标转换', 0, 1, 1, NULL, 1400.00, '测区高程模型转换费用');
INSERT INTO `cmc_settle_work` VALUES (1699, '1648881415047870323', '外业-地形图测绘/地形图(激光)测绘', 0, 0.65, 1.15, '0', 5083.00, '汉源县城主次干路地形测量，公路带状，长15Km,平均宽度46m');
INSERT INTO `cmc_settle_work` VALUES (1700, '1648881415047870323', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.083, 1, '0', 1269.90, '移民增收项目1:200地形图测绘');
INSERT INTO `cmc_settle_work` VALUES (1701, '1648881415047870323', '外业-地形图测绘/地形图(激光)测绘', 0, 0.48, 1, '0', 1632.00, '裸露边坡0.350，万里工业园区范家沟道路0.130');
INSERT INTO `cmc_settle_work` VALUES (1702, '1648881415047870427', '激光采集现场住宿', 0, 1, 1, NULL, 7076.00, '第一次3042，第二次4034');
INSERT INTO `cmc_settle_work` VALUES (1703, '1648881415047870427', '现场租车', 0, 8, 1, NULL, 4400.00, '现场根据工作需要租车，控制用车2天，采集用车6天，故不扣台班费');
INSERT INTO `cmc_settle_work` VALUES (1704, '1648881415047870323', '汉源县城主次干路地形测量（内业）', 0, 0.69, 1, '1', 7245.00, '航测遥感中心6人采集9天，地理信息中心2人11天；车载激光数据处理按复杂地类申请结算');
INSERT INTO `cmc_settle_work` VALUES (1705, '1648881415047870271', '外业-地形图测绘/地形图外业实测', 0, 0.07, 1, '0', 1190.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1706, '1648881415047870312', '外业-其他/进出场', 0, 8, 1, '1', 2640.00, '4人*2天');
INSERT INTO `cmc_settle_work` VALUES (1707, '1648881415047870312', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '1', 1600.00, '2人*2天');
INSERT INTO `cmc_settle_work` VALUES (1708, '1648881415047870263', '外业-高程测量/三角高程测量、单程双测', 0, 9.053, 1.25, '0', 1996.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (1709, '1648881415047870263', '外业-地形图测绘/地形图外业实测', 0, 0.071, 1.25, '0', 3017.50, '测绘工程中心');
INSERT INTO `cmc_settle_work` VALUES (1710, '1648881415047870263', '内业-编图/地形图数字化', 0, 0.071, 1.25, '0', 655.90, '航测遥感中心');
INSERT INTO `cmc_settle_work` VALUES (1711, '1648881415047870263', '外业-地形图测绘/地形图(无人机)测绘', 0, 4.554, 1.25, '0', 16138.20, '测绘工程中心');
INSERT INTO `cmc_settle_work` VALUES (1712, '1648881415047870263', '内业-航测/地形图航测', 0, 4.554, 1.1, '0', 9016.90, '航测遥感中心，含空三加密');
INSERT INTO `cmc_settle_work` VALUES (1713, '1648881415047870263', '外业-地形图测绘/地形图外业实测', 0, 3.135, 1.25, '0', 24688.10, '水下地形，测绘工程中心');
INSERT INTO `cmc_settle_work` VALUES (1714, '1648881415047870263', '内业-编图/地形图数字化', 0, 3.135, 1, '0', 2069.10, '水下地形，航测遥感中心');
INSERT INTO `cmc_settle_work` VALUES (1715, '1648881415047870263', '外业-断面测量/断面测量', 0, 0.723, 1.25, '0', 795.30, '2021年完成');
INSERT INTO `cmc_settle_work` VALUES (1716, '1648881415047870263', '外业-公路测量/公路参考点测量', 0, 574, 1.25, '0', 2583.00, '水工建筑物特征参数测量');
INSERT INTO `cmc_settle_work` VALUES (1717, '1648881415047870263', '外业-断面测量/断面测量', 0, 8, 1.25, '0', 900.00, '2022年完成');
INSERT INTO `cmc_settle_work` VALUES (1718, '1648881415047870263', '外业-断面测量/断面测量', 0, 8.52, 1.25, '0', 6070.50, '2022年完成');
INSERT INTO `cmc_settle_work` VALUES (1719, '1648881415047870263', '外业-其他/进出场', 0, 16, 1, '1', 5280.00, '2021年进出场为10人天，2022年进出场为6人天');
INSERT INTO `cmc_settle_work` VALUES (1720, '1648881415047870263', '车辆租赁费', 0, 1, 1, '1', 12435.00, '2021年费用为7885元（租车费6300、加油费1585）、2022年费用为4550元（租车费3500元、加油费1050元）。合计');
INSERT INTO `cmc_settle_work` VALUES (1721, '1648881415047870368', '内业-激光制图/激光数据制作地形图', 0, 13.5, 1, '0', 8370.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1722, '1648881415047870263', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 9, 1.25, '0', 2137.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (1723, '1648881415047870368', '内业-激光制图/激光数据制作地形图', 0, 15, 0.3, '0', 2790.00, '地类图增加30％；');
INSERT INTO `cmc_settle_work` VALUES (1724, '1648881415047870268', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.147, 1, '0', 1124.60, '测绘工程中心');
INSERT INTO `cmc_settle_work` VALUES (1725, '1648881415047870268', '内业-航测/地形图航测', 0, 0.147, 1.1, '0', 760.00, '航测遥感中心（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (1726, '1648881415047870268', '外业-断面测量/断面测量', 0, 2, 1, '0', 180.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1727, '1648881415047870268', '外业-断面测量/断面测量', 0, 0.114, 1, '0', 79.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (1728, '1648881415047870268', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 720.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1729, '1648881415047870268', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1730, '1648881415047870368', '内业-编图/地形图数字化', 0, 0, 0, '1', 0.00, '外业修补测按总面积10％计算；');
INSERT INTO `cmc_settle_work` VALUES (1731, '1648881415047870116', '现场配合测量', 0, 18, 1, '1', 7200.00, '黄金坪水电站孙家沟移民配合测量');
INSERT INTO `cmc_settle_work` VALUES (1732, '1648881415047870116', '外业-其他/进出场', 0, 6, 1, '1', 1980.00, '参与人员徐志勇、何涛、李旭、张明勇（驾驶员）');
INSERT INTO `cmc_settle_work` VALUES (1733, '1648881415047870116', '配合测量', 0, 14, 1, '1', 5600.00, '猴子岩实际工作量较小，按配合方式结算。');
INSERT INTO `cmc_settle_work` VALUES (1734, '1648881415047870373', '铜街子电站1:1000地形图补测', 0, 0.544, 1, '0', 0.00, '委外测编');
INSERT INTO `cmc_settle_work` VALUES (1735, '1648881415047870373', '内业-航测/地形图航测', 0, 0.62, 0.1, '0', 111.60, '航测遥感中心空三');
INSERT INTO `cmc_settle_work` VALUES (1736, '1648881415047870373', '内业-编图/地形图数字化', 0, 0.112, 0.6, '0', 44.40, '测绘工程中心实测，航测遥感中心数字化');
INSERT INTO `cmc_settle_work` VALUES (1737, '1648881415047870373', '内业-坐标转换/坐标系转换', 0, 12, 1, '0', 180.00, '已测地形图2幅、业主新增地形图1幅，每幅按4点计算');
INSERT INTO `cmc_settle_work` VALUES (1738, '1648881415047870373', '内业-航测/地形图航测', 0, 2.99, 0.5, '0', 2691.00, '航测遥感中心完成，龚嘴电站1:1000地形图1.43km²、铜街子电站1:1000地形图1.56km²；按甲方意思更换高程系统');
INSERT INTO `cmc_settle_work` VALUES (1739, '1648881415047870373', '外业-高程测量/水准测量', 0, 6.152, 0.7, '0', 775.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (1740, '1648881415047870373', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.544, 1, '0', 1542.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (1741, '1648881415047870373', '外业-地形图测绘/地形图外业实测', 0, 0.112, 1, '0', 705.60, '测绘工程中心实测，航测遥感中心数字化');
INSERT INTO `cmc_settle_work` VALUES (1742, '1648881415047870373', '外业-地形图测绘/地形图外业实测（水下地形测量）', 0, 0.714, 1, '0', 4498.20, '铜街子电站0.197km²、龚嘴电站0.517km²，测绘工程中心完成外业及数字化');
INSERT INTO `cmc_settle_work` VALUES (1743, '1648881415047870373', '外业-断面测量/断面测量', 0, 4.454, 0.6, '0', 1870.70, '同时水面线测量，铜街子电站2.528km；龚嘴电站1.926km;');
INSERT INTO `cmc_settle_work` VALUES (1744, '1648881415047870373', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 800.00, '铜街子电站地形图补测航飞');
INSERT INTO `cmc_settle_work` VALUES (1745, '1648881415047870234', '德方公司现场开销', 0, 1, 1, NULL, 1371.00, '德方公司现场开销');
INSERT INTO `cmc_settle_work` VALUES (1746, '1648881415047870436', '工程监理', 0, 205000, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (1747, '1648881415047870368', '外业-地形图测绘/地形图外业实测', 0, 1.5, 1, '1', 5400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1748, '1648881415047870378', '外业-航飞/无人机航飞(飞行项目）', 0, 10, 1.25, '0', 5000.00, '杨为康、罗友权2人，飞行5天');
INSERT INTO `cmc_settle_work` VALUES (1749, '1648881415047870378', '燃油费（无票）', 0, 1, 1, '0', 2579.00, '忠玉乡无加油站，加私人汽油，无发票。');
INSERT INTO `cmc_settle_work` VALUES (1750, '1648881415047870378', '外业-其他/进出场', 0, 8, 1, '1', 2640.00, '杨为康、刘轩庭、黄建春、罗友权4人进出场');
INSERT INTO `cmc_settle_work` VALUES (1751, '1648881415047870234', '内业-DOM/DOM制作', 0, 5.38, 1, '0', 4035.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1752, '1648881415047870399', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.26, 1, '1', 2340.00, '测绘工程中心');
INSERT INTO `cmc_settle_work` VALUES (1753, '1648881415047870399', '内业-航测/地形图航测', 0, 0.26, 1.1, '0', 1344.20, '航测遥感中心（空三加密）');
INSERT INTO `cmc_settle_work` VALUES (1754, '1648881415047870399', '外业-其他/进出场', 0, 12, 1, '0', 3600.00, '3人*4天');
INSERT INTO `cmc_settle_work` VALUES (1755, '1648881415047870399', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 800.00, '2人*1天');
INSERT INTO `cmc_settle_work` VALUES (1756, '1648881415047870446', '五等点', 0, 20, 1.25, '0', 4750.00, '平均海拔3700m，增加25%');
INSERT INTO `cmc_settle_work` VALUES (1757, '1648881415047870446', '工程区地形图测绘', 0, 18.3, 1, '0', 11346.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1758, '1648881415047870446', '施工区地形图测绘、淹没区地形图测绘', 0, 44.24, 1, '0', 10617.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (1759, '1648881415047870446', '1:2000 地形图缩编成1:5000地形图', 0, 18.3, 1.2, '0', 1317.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (1760, '1648881415047870446', '内业-DEM、地形面/DEM、三维地形面制作', 0, 18.3, 1, '0', 3660.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1761, '1648881415047870446', '内业-DEM、地形面/DEM、三维地形面制作', 0, 55.94, 1, '0', 3915.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (1762, '1648881415047870446', '无人机激光点云数据采集', 0, 12, 1.5, '0', 7200.00, '朱倪强、王刚、邓锡全，8.22-8.25，4天，系数1.5，平均海拔3700m');
INSERT INTO `cmc_settle_work` VALUES (1763, '1648881415047870446', '内业-激光数据预处理/激光数据预处理', 0, 51.74, 1, '0', 3104.40, '按1:2000采集');
INSERT INTO `cmc_settle_work` VALUES (1764, '1648881415047870446', '外业-航飞/无人机航飞(飞行项目）', 0, 9, 1.25, '0', 4050.00, '平均海拔3700m，增加25%');
INSERT INTO `cmc_settle_work` VALUES (1765, '1648881415047870446', '外业-地形图调绘、检查点采集', 0, 62.54, 0.225, '0', 12664.40, '平均海拔3700m，增加25%');
INSERT INTO `cmc_settle_work` VALUES (1766, '1648881415047870446', '外业-地形图调绘、检查点采集', 0, 18.3, 0.225, '0', 12352.50, '平均海拔3700m，增加25%');
INSERT INTO `cmc_settle_work` VALUES (1767, '1648881415047870446', '外业-其他/进出场', 0, 16, 1, '0', 4800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1768, '1648881415047870337', '外业-断面测量/断面测量', 0, 17.7, 1, '1', 0.00, '委外完成。同时水边线测量。');
INSERT INTO `cmc_settle_work` VALUES (1769, '1648881415047870337', '外业-航飞/无人机航飞(飞行项目）', 0, 10, 1, '1', 4000.00, '视频拍摄，廖绍毅完成。');
INSERT INTO `cmc_settle_work` VALUES (1770, '1648881415047870337', '委外管理及报告编写', 0, 1, 1, '1', 2000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1771, '1648881415047870273', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 42, 1.3, '0', 21840.00, '王刚、万龙卿、熊艳华5.8-5.21，三人14天，高差700多米');
INSERT INTO `cmc_settle_work` VALUES (1772, '1648881415047870273', '内业-激光数据预处理/激光数据预处理', 0, 68.37, 1, '0', 6153.30, '按要求的采集比例尺');
INSERT INTO `cmc_settle_work` VALUES (1773, '1648881415047870273', '外业-地形图测绘/地形图(激光)测绘', 0, 68.37, 1, '0', 12306.60, '激光技术中心完成，具体工天见上报说明');
INSERT INTO `cmc_settle_work` VALUES (1774, '1648881415047870273', '新增地形图', 0, 9.28, 0, '0', 0.00, '外协');
INSERT INTO `cmc_settle_work` VALUES (1775, '1648881415047870273', '内业-DEM、地形面/DEM、三维地形面制作', 0, 68.37, 0, '0', 0.00, '德方完成');
INSERT INTO `cmc_settle_work` VALUES (1776, '1648881415047870273', '内业-DEM、地形面/DEM、三维地形面制作', 0, 9.28, 1, '0', 649.60, '新增区域三维地形面，激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (1777, '1648881415047870273', '内业-DOM/DOM制作', 0, 34.5, 0, '0', 0.00, '德方完成');
INSERT INTO `cmc_settle_work` VALUES (1778, '1648881415047870273', '内业-编图/地形图数字化', 0, 68.37, 0, '0', 0.00, '德方完成');
INSERT INTO `cmc_settle_work` VALUES (1779, '1648881415047870273', '项目管理费', 0, 1, 1, NULL, 2500.00, '外协总合同额84046，按合同额3%');
INSERT INTO `cmc_settle_work` VALUES (1780, '1648881415047870273', '外业-其他/进出场', 0, 11, 1, '0', 3630.00, '见工作量上报说明');
INSERT INTO `cmc_settle_work` VALUES (1781, '1648881415047870425', '内业-激光数据预处理/激光数据预处理', 0, 11.12, 1, '0', 834.00, '外协采集');
INSERT INTO `cmc_settle_work` VALUES (1782, '1648881415047870425', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 6, 1, '0', 3000.00, '砂岩料场，2.23-2.24，朱倪强、吴振、雷光泽');
INSERT INTO `cmc_settle_work` VALUES (1783, '1648881415047870368', '外业-地形图测绘/地形图(激光)测绘', 0, 13.5, 1, '1', 9720.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1784, '1648881415047870425', '内业-激光数据预处理/激光数据预处理', 0, 7.14, 1, '0', 321.30, '外协采集');
INSERT INTO `cmc_settle_work` VALUES (1785, '1648881415047870368', '外业-地形图测绘/地形图(激光)测绘', 0, 15, 0.2, '1', 2160.00, '地类图按20％；');
INSERT INTO `cmc_settle_work` VALUES (1786, '1648881415047870413', '大渡河金川水电站工程测量中心变更结算（2022年）', 0, 1, 1, '0', 55042.80, '详见变更结算审批单。');
INSERT INTO `cmc_settle_work` VALUES (1787, '1648881415047870273', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 22, 1, '0', 4180.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1788, '1648881415047870430', '外业-其他/配合测量', 0, 57, 1, '0', 20520.00, '配合质检检查修改工作外业。');
INSERT INTO `cmc_settle_work` VALUES (1789, '1648881415047870374', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 0.2, 1, '0', 1360.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1790, '1648881415047870336', '外业-地形图测绘/地形图(激光)测绘', 0, 3.6, 1.5, '0', 6804.00, '测绘工程中心完成。地形地类图，系数为1.2*1.25=1.5');
INSERT INTO `cmc_settle_work` VALUES (1791, '1648881415047870413', '大渡河金川水电站工程测量中心劳务配合（2023年）', 0, 1, 0, '0', 465000.00, '详见金川项目委托费用审批单。');
INSERT INTO `cmc_settle_work` VALUES (1792, '1648881415047870352', '内业-航测/地形图航测', 0, 18.4, 1.1, '0', 4452.80, '空三增加10％');
INSERT INTO `cmc_settle_work` VALUES (1793, '1648881415047870352', '内业-DEM、地形面/DEM、三维地形面制作', 0, 6.2, 1, '0', 1240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1794, '1648881415047870352', '内业-DEM、地形面/DEM、三维地形面制作', 0, 16.8, 1, '0', 1176.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1795, '1648881415047870352', '外业-地形图测绘/地形图(无人机)测绘', 0, 6.2, 1, '0', 8370.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1796, '1648881415047870352', '外业-地形图测绘/地形图(无人机)测绘', 0, 18.4, 1, '0', 7452.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1797, '1648881415047870352', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 0.5, '0', 570.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1798, '1648881415047870352', '外业-航飞/无人机航飞(飞行项目）', 0, 6, 1, '0', 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1799, '1648881415047870352', '高程转换', 0, 1, 1, '0', 500.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1800, '1648881415047870352', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '夏志军、刘轩庭、邓锡全3人参与项目');
INSERT INTO `cmc_settle_work` VALUES (1801, '1648881415047870274', '地形图测绘', 0, 62.88, 1, '0', 37728.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1802, '1648881415047870352', '内业-航测/地形图航测', 0, 6.2, 1.1, '0', 5115.00, '空三增加10％');
INSERT INTO `cmc_settle_work` VALUES (1803, '1648881415047870343', '民工费', 0, 1, 1, '0', 400.00, '聘请向导带路');
INSERT INTO `cmc_settle_work` VALUES (1804, '1648881415047870343', '外业-其他/进出场', 0, 44, 1, '0', 13200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1805, '1648881415047870347', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 12, 1, '0', 2280.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1806, '1648881415047870347', '高程解算', 0, 1, 1, '0', 500.00, '自然资源部第三大地测量队解算1985国家高程基准成果');
INSERT INTO `cmc_settle_work` VALUES (1807, '1648881415047870347', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.818, 1, '0', 2319.00, '测绘工程中心完成。川西大桥固床坝0.724、工点二边坡0.029、工点三边坡0.065');
INSERT INTO `cmc_settle_work` VALUES (1808, '1648881415047870347', '内业-航测/地形图航测', 0, 0.818, 1.1, '0', 1619.60, '航测遥感中心完成（含空三加密系数为1.1）');
INSERT INTO `cmc_settle_work` VALUES (1809, '1648881415047870347', '外业-其他/配合测量', 0, 3, 1, '0', 1080.00, '3人*1天。2022年03月03日，潘林海、刘轩庭、熊艳华到现场进行特征点测量。');
INSERT INTO `cmc_settle_work` VALUES (1810, '1648881415047870347', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '0', 1600.00, '2人*2天');
INSERT INTO `cmc_settle_work` VALUES (1811, '1648881415047870347', '外业-其他/进出场', 0, 10, 1, '0', 3000.00, '5人*2天');
INSERT INTO `cmc_settle_work` VALUES (1812, '1648881415047870306', '外业-高程测量/三角高程测量、单程双测', 0, 8.45, 1, '0', 1490.60, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1813, '1648881415047870306', '高程解算费用', 0, 1, 1, '0', 300.00, '自然资源部第三大地测量队解算1985国家高程基准成果');
INSERT INTO `cmc_settle_work` VALUES (1814, '1648881415047870306', '外业-地形图测绘/地形图(无人机)测绘', 0, 1.02, 1, '0', 2891.70, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1815, '1648881415047870306', '内业-航测/地形图航测', 0, 1.02, 1.1, '0', 0.00, '委外完成');
INSERT INTO `cmc_settle_work` VALUES (1816, '1648881415047870306', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 800.00, '2人*1天');
INSERT INTO `cmc_settle_work` VALUES (1817, '1648881415047870306', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '3人*2天');
INSERT INTO `cmc_settle_work` VALUES (1818, '1648881415047870306', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 1, '0', 1140.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1819, '1648881415047870375', '内业-航测/地形图航测', 0, 9.6, 0.1, '0', 211.20, '空三加密按10％计算');
INSERT INTO `cmc_settle_work` VALUES (1820, '1648881415047870375', '内业-航测/地形图航测', 0, 4.7, 0.1, '0', 352.50, '空三加密按10％计算');
INSERT INTO `cmc_settle_work` VALUES (1821, '1648881415047870375', '内业-航测/地形图航测', 0, 4.7, 1, '0', 3525.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1822, '1648881415047870443', '委外生产管理、质量检查并协助修改，编写报告', 0, 1, 1, '0', 1000.00, '测绘工程中心负责');
INSERT INTO `cmc_settle_work` VALUES (1823, '1648881415047870443', 'II期-地形图测绘（委外）', 0, 0.301, 1, '0', 0.00, '机载激光成图');
INSERT INTO `cmc_settle_work` VALUES (1824, '1648881415047870375', '内业-航测/地形图航测', 0, 9.6, 1, '0', 2112.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1825, '1648881415047870375', '内业-DEM、地形面/DEM、三维地形面制作', 0, 4.7, 1, '0', 940.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1826, '1648881415047870375', '内业-DEM、地形面/DEM、三维地形面制作', 0, 9.6, 1, '0', 672.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1827, '1648881415047870375', '内业-DOM/DOM制作', 0, 14.7, 1, '0', 2205.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1828, '1648881415047870375', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 0.5, '0', 570.00, '现场采用刻石方式布设控制点');
INSERT INTO `cmc_settle_work` VALUES (1829, '1648881415047870375', '外业-地形图测绘/地形图(无人机)测绘', 0, 9.6, 1, '0', 3888.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1830, '1648881415047870362', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 8, 1, '1', 1600.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1831, '1648881415047870362', '外业-地形图测绘/地形图(激光)测绘', 0, 6.28, 1, '1', 9545.60, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1832, '1648881415047870362', '内业-激光制图/激光数据制作地形图', 0, 6.28, 1, '0', 0.00, '德方公司完成');
INSERT INTO `cmc_settle_work` VALUES (1833, '1648881415047870362', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 6.28, 1, '1', 0.00, '委外完成。');
INSERT INTO `cmc_settle_work` VALUES (1834, '1648881415047870362', '内业-激光数据预处理/激光数据预处理', 0, 6.28, 1, '0', 0.00, '德方公司完成');
INSERT INTO `cmc_settle_work` VALUES (1835, '1648881415047870362', '现场租车', 0, 9, 1, '1', 6300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1836, '1648881415047870296', '外业-其他/进出场', 0, 4, 1, '0', 1200.00, '2人');
INSERT INTO `cmc_settle_work` VALUES (1837, '1648881415047870279', '外业-其他/进出场', 0, 4, 1, '0', 1200.00, '朱倪强、陈建贤2人进出场');
INSERT INTO `cmc_settle_work` VALUES (1838, '1648881415047870296', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.09, 1, '0', 688.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (1839, '1648881415047870415', '民工', 0, 1, 1, NULL, 2200.00, '现场请民工开展工作，累计11人天');
INSERT INTO `cmc_settle_work` VALUES (1840, '1648881415047870415', '外业-其他/进出场', 0, 1, 1, '0', 300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1841, '1648881415047870394', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 1.5, '0', 1710.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1842, '1648881415047870394', '外业-高程测量/水准测量', 0, 61.464, 1.05, '0', 11616.70, NULL);
INSERT INTO `cmc_settle_work` VALUES (1843, '1648881415047870394', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 18.429, 1.5, '0', 9951.70, NULL);
INSERT INTO `cmc_settle_work` VALUES (1844, '1648881415047870394', '民工', 0, 6, 1, '0', 1680.00, '电站强调，现场请民工2人，3天，单价280');
INSERT INTO `cmc_settle_work` VALUES (1845, '1648881415047870394', '委外管理', 0, 210, 1, '0', 1050.00, '委外资料检查、协助修改、分幅图制作等，按5人天申请结算');
INSERT INTO `cmc_settle_work` VALUES (1846, '1648881415047870394', '卫片购买', 0, 1, 1, '0', 10000.00, '项目借款已支付');
INSERT INTO `cmc_settle_work` VALUES (1847, '1648881415047870298', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 49, 1.2, '0', 23520.00, '2023.2.9-2.12吴振、朱倪强、雷光泽。3人4天。2023.3.16-3.17朱倪强、陈建贤。2人2天。2023.4.11吴振、朱倪');
INSERT INTO `cmc_settle_work` VALUES (1848, '1648881415047870390', '内业-激光数据预处理/激光数据预处理', 0, 15.83, 1, '0', 1424.70, NULL);
INSERT INTO `cmc_settle_work` VALUES (1849, '1648881415047870394', '外业-其他/进出场', 0, 6, 1, '1', 1980.00, '杨为康、夏至斌、罗友权3人，米林-墨竹工卡县进出场');
INSERT INTO `cmc_settle_work` VALUES (1850, '1648881415047870394', '内业-航测/地形图航测', 0, 18.429, 1, '0', 0.00, '委外完成');
INSERT INTO `cmc_settle_work` VALUES (1851, '1648881415047870424', '断面基点新建与维护、联测与复测、断面测量、淤积分析及报告编写', 0, 1, 1, '0', 208350.00, '按合同金额的30％申请结算');
INSERT INTO `cmc_settle_work` VALUES (1852, '1648881415047870395', '内业-航测/地形图航测', 0, 58.8, 1.1, '0', 14229.60, '总面积64.1，含,1000范围5.3km²，空三增加10％。');
INSERT INTO `cmc_settle_work` VALUES (1853, '1648881415047870395', '内业-比例尺缩放/地形图比例尺缩放', 0, 5.3, 1.2, '0', 457.90, '卫片成图');
INSERT INTO `cmc_settle_work` VALUES (1854, '1648881415047870395', '内业-航测/地形图航测', 0, 5.3, 1.1, '0', 10494.00, '空三增加10％，坝子区3.3km²、厂址区2.0km²');
INSERT INTO `cmc_settle_work` VALUES (1855, '1648881415047870395', '内业-DEM、地形面/DEM、三维地形面制作', 0, 5.3, 1, '0', 1060.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1856, '1648881415047870395', '内业-DOM/DOM制作', 0, 5.3, 1, '0', 795.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1857, '1648881415047870395', '内业-DOM/DOM制作', 0, 64.1, 1, '0', 3205.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1858, '1648881415047870395', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 8, 1.15, '0', 6716.00, '移动CORS起算');
INSERT INTO `cmc_settle_work` VALUES (1859, '1648881415047870395', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 12, 1.15, '0', 9108.00, '新建12点');
INSERT INTO `cmc_settle_work` VALUES (1860, '1648881415047870395', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 4, 1.15, '0', 1821.60, '联测二等点4点');
INSERT INTO `cmc_settle_work` VALUES (1861, '1648881415047870395', '外业-高程测量/水准测量', 0, 43.061, 1.15, '0', 8913.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (1862, '1648881415047870395', '外业-高程测量/水准测量', 0, 31.757, 0.805, '0', 4601.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (1863, '1648881415047870318', '空域申请费用', 0, 1, 1, '0', 20000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1864, '1648881415047870318', '外业-地形图测绘/地形图(激光)测绘', 0, 9.813, 1, '0', 33364.20, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1865, '1648881415047870318', '内业-激光制图/激光数据制作地形图', 0, 9.813, 1, '0', 26985.80, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1866, '1648881415047870318', '内业-激光数据预处理/激光数据预处理', 0, 9.813, 1, '0', 1766.30, '激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (1867, '1648881415047870318', '外业-航飞/无人机航飞(飞行项目）', 0, 12, 1, '0', 4800.00, '激光技术中心，3人*4天');
INSERT INTO `cmc_settle_work` VALUES (1868, '1648881415047870318', '外业-地形图测绘/地形图(激光)测绘', 0, 3.652, 1, '0', 4601.50, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1869, '1648881415047870318', '内业-激光制图/激光数据制作地形图', 0, 3.652, 1, '0', 0.00, '德方公司完成');
INSERT INTO `cmc_settle_work` VALUES (1870, '1648881415047870318', '外业-断面测量/断面测量', 0, 18.576, 1, '0', 0.00, '委外完成');
INSERT INTO `cmc_settle_work` VALUES (1871, '1648881415047870318', '租车', 0, 19, 1, NULL, 5700.00, '现场开展调绘工作，租用车辆每日早晚接送');
INSERT INTO `cmc_settle_work` VALUES (1872, '1648881415047870318', '外业-航飞/无人机航飞(飞行项目）', 0, 3, 1, '0', 1200.00, '测绘工程中心，3人*1天，委外飞行漏少许空洞。由丁亮补飞。');
INSERT INTO `cmc_settle_work` VALUES (1873, '1648881415047870318', '外业-其他/进出场', 0, 16, 1, '0', 4800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1874, '1648881415047870318', '委外测绘管理及报告编写等', 0, 1, 1, NULL, 1000.00, '水下地形现场监管、横断面报告修改等。');
INSERT INTO `cmc_settle_work` VALUES (1875, '1648881415047870319', '外业-地形图测绘/地形图(激光)测绘', 0, 0.11, 1, '0', 374.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1876, '1648881415047870319', '内业-激光制图/激光数据制作地形图', 0, 0.11, 1, '0', 0.00, '委外成图');
INSERT INTO `cmc_settle_work` VALUES (1877, '1648881415047870319', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.34, 1, '0', 2601.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1878, '1648881415047870319', '内业-航测/地形图航测', 0, 0.34, 1.1, '0', 1757.80, '航测遥感中心完成（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (1879, '1648881415047870319', '外业-地形图测绘/地形图(激光)测绘', 0, 0.54, 1, '0', 1836.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1880, '1648881415047870319', '内业-激光制图/激光数据制作地形图', 0, 0.54, 1, '0', 0.00, '委外成图');
INSERT INTO `cmc_settle_work` VALUES (1881, '1648881415047870319', '外业-航飞/无人机航飞(飞行项目）', 0, 10, 1, '0', 4000.00, '2人*5天。因现场天气条件较差，测区较为分散，相隔较远。');
INSERT INTO `cmc_settle_work` VALUES (1882, '1648881415047870319', '外业-其他/进出场', 0, 10, 1, '0', 3000.00, '5人*2天');
INSERT INTO `cmc_settle_work` VALUES (1883, '1648881415047870303', '委外测量', 0, NULL, 1, '1', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1884, '1648881415047870395', '外业-地形图测绘/地形图(无人机)测绘', 0, 5.3, 1.15, '0', 17279.30, NULL);
INSERT INTO `cmc_settle_work` VALUES (1885, '1648881415047870395', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 64.1, 1.15, '0', 26537.40, '卫片成图');
INSERT INTO `cmc_settle_work` VALUES (1886, '1648881415047870395', '外业-地形图测绘/地形图外业实测', 0, 0.246, 1.15, '0', 1782.30, '水下地形测量，坝址区0.151km²，厂址区0.095km²');
INSERT INTO `cmc_settle_work` VALUES (1887, '1648881415047870280', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 1.35, '0', 1539.00, '激光技术中心，测区平均高程4000米');
INSERT INTO `cmc_settle_work` VALUES (1888, '1648881415047870395', '外业-其他/配合测量', 0, 12, 1.15, '0', 4968.00, '钻孔收桩2人1天；地形图校核17人天（含委外单位7人天）');
INSERT INTO `cmc_settle_work` VALUES (1889, '1648881415047870280', '外业-高程测量/水准测量(爬山、洞内）', 0, 7.6, 1.35, '0', 1846.80, '激光技术中心，测区平均高程4000米');
INSERT INTO `cmc_settle_work` VALUES (1890, '1648881415047870280', '外业-地形图测绘/地形图(激光)测绘', 0, 9.6, 1.35, '0', 7776.00, '激光技术中心，3.23-.3.31，测区平均高程4000米');
INSERT INTO `cmc_settle_work` VALUES (1891, '1648881415047870280', '外业-地形图测绘/地形图(激光)测绘', 0, 15.6, 1.35, '0', 3790.80, '激光技术中心，3.23-.3.31，测区平均高程4000米');
INSERT INTO `cmc_settle_work` VALUES (1892, '1648881415047870280', '内业-激光制图/激光数据制作地形图', 0, 9.6, 1, '0', 5952.00, '航测遥感中心');
INSERT INTO `cmc_settle_work` VALUES (1893, '1648881415047870280', '内业-激光制图/激光数据制作地形图', 0, 25.2, 1, '0', 6048.00, '航测遥感中心');
INSERT INTO `cmc_settle_work` VALUES (1894, '1648881415047870280', '内业-激光数据预处理/激光数据预处理', 0, 25.2, 1, '0', 1512.00, '激光技术中心，飞行外协');
INSERT INTO `cmc_settle_work` VALUES (1895, '1648881415047870280', '坐标转换', 0, 1, 1, NULL, 300.00, '坐标转换');
INSERT INTO `cmc_settle_work` VALUES (1896, '1648881415047870424', '外业-水下多波速扫描', 0, 1, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1897, '1648881415047870341', '革什扎河两河口水电站坐标转换工作（2022C33）外业', 0, 3, 1, '1', 1200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1898, '1648881415047870341', '革什扎河两河口水电站坐标转换工作（2022C33）内业', 0, 32, 1, '1', 480.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1899, '1648881415047870341', '革什扎河二瓦槽水电站找点', 0, 3, 1, '1', 1200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1900, '1648881415047870353', '内业-航测/地形图航测', 0, 9.88, 1, '0', 0.00, '中水德方完成');
INSERT INTO `cmc_settle_work` VALUES (1901, '1648881415047870364', '内业-激光制图/激光数据制作地形图', 0, 70.811, 1, '0', 9205.40, '点云生成等高线，卫片空三采集地物');
INSERT INTO `cmc_settle_work` VALUES (1902, '1648881415047870364', '内业-编图/地形图数字化', 0, 28.808, 1.2, '0', 691.40, '2000地形图缩编');
INSERT INTO `cmc_settle_work` VALUES (1903, '1648881415047870364', '内业-航测/地形图航测', 0, 70.811, 0.1, '0', 708.10, '空三加密');
INSERT INTO `cmc_settle_work` VALUES (1904, '1648881415047870264', '内业-航测/地形图航测', 0, 5.096, 1, '0', 0.00, '一号厂址。中水德方公司完成。');
INSERT INTO `cmc_settle_work` VALUES (1905, '1648881415047870264', '外业-地形图测绘/地形图(无人机)测绘', 0, 7.728, 1.5, '0', 15649.20, '二号厂址。测绘工程中心完成。');
INSERT INTO `cmc_settle_work` VALUES (1906, '1648881415047870264', '内业-航测/地形图航测', 0, 7.728, 1, '0', 0.00, '二号厂址。中水德方公司完成。');
INSERT INTO `cmc_settle_work` VALUES (1907, '1648881415047870264', '外业-其他/配合测量', 0, 16, 1, '0', 5760.00, '因测区降雪，项目部要求在现场等待。');
INSERT INTO `cmc_settle_work` VALUES (1908, '1648881415047870264', '外业-航飞/无人机航飞(飞行项目）', 0, 12, 1, '0', 4800.00, '3人*4天。');
INSERT INTO `cmc_settle_work` VALUES (1909, '1648881415047870264', '外业-其他/进出场', 0, 10, 1, '0', 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1910, '1648881415047870310', '老旧小区地形图测绘，项目管理', 0, 1, 1, '0', 2000.00, '业主沟通，项目管理。同时现场检查等');
INSERT INTO `cmc_settle_work` VALUES (1911, '1648881415047870364', '内业-航测/地形图航测', 0, 28.808, 0.1, '0', 2160.60, '空三加密');
INSERT INTO `cmc_settle_work` VALUES (1912, '1648881415047870327', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 11, 1, '0', 5500.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1913, '1648881415047870327', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 35, 1, '0', 6650.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1914, '1648881415047870327', '外业-高程测量/水准测量', 0, 95.02, 1, '0', 17103.60, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1915, '1648881415047870406', '外业-高程测量/水准测量', 0, 3.72, 1, '0', 1562.40, '垂直位移基准点2次校核');
INSERT INTO `cmc_settle_work` VALUES (1916, '1648881415047870313', '外业-其他/配合测量', 0, 18, 1, '1', 7200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1917, '1648881415047870364', '内业-航测/地形图航测', 0, 22.664, 1, '0', 16998.00, '利用卫片空三成图');
INSERT INTO `cmc_settle_work` VALUES (1918, '1648881415047870265', '外业-其他/配合测量', 0, 24, 1.5, '0', 12960.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1919, '1648881415047870364', '内业-激光制图/激光数据制作地形图', 0, 9.6, 1, '0', 5952.00, '点云生成等高线，卫片空三采集地物');
INSERT INTO `cmc_settle_work` VALUES (1920, '1648881415047870364', '内业-编图/地形图数字化', 0, 6.144, 0.6, '0', 866.30, '外业修补测地形图数字化');
INSERT INTO `cmc_settle_work` VALUES (1921, '1648881415047870364', '内业-DEM、地形面/DEM、三维地形面制作', 0, 29.215, 1, '0', 5843.00, '坝址区三维地形面制作');
INSERT INTO `cmc_settle_work` VALUES (1922, '1648881415047870406', '外业-高程测量/水准测量', 0, 50.83, 1, '0', 21348.60, '垂直位移监测，每期监测34点，累计监测15期、基准值获取2期');
INSERT INTO `cmc_settle_work` VALUES (1923, '1648881415047870364', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 8, 1, '0', 5280.00, '新建点');
INSERT INTO `cmc_settle_work` VALUES (1924, '1648881415047870309', '管理费用', 0, 0.02, 1, '0', 7858.40, '项目管理费，合同金额为392920，经沟通管理费用为合同金额的2%');
INSERT INTO `cmc_settle_work` VALUES (1925, '1648881415047870406', '外业-公路测量/公路中桩、角桩测设', 0, 140, 1, '1', 2800.00, '平位移位移点监测，每期10点，累计监测13期、基准值获取1期，参照此标准执行');
INSERT INTO `cmc_settle_work` VALUES (1926, '1648881415047870406', '外业-公路测量/公路参考点测量', 0, 210, 1, '1', 840.00, '裂缝监测，每期15点，累计监测13期、基准值获取1期，参照此标准执行');
INSERT INTO `cmc_settle_work` VALUES (1927, '1648881415047870406', '资料整编', 0, 1, 1, '0', 1500.00, '监测项目，特别申请。含10期简报、1期总报告及贯标资料1套');
INSERT INTO `cmc_settle_work` VALUES (1928, '1648881415047870406', '外业-其他/进出场', 0, 10, 1, '0', 3000.00, '赵洪（20201014-1028）、刘轩庭（20201014-1028）、潘林海（20201014-1025）、康科伟（20201014-1028）、周');
INSERT INTO `cmc_settle_work` VALUES (1929, '1648881415047870374', '内业-航测/地形图航测', 0, 0.2, 1.1, '0', 1034.00, '空三按10％计算');
INSERT INTO `cmc_settle_work` VALUES (1930, '1648881415047870374', '内业-航测/地形图航测', 0, 1.36, 1.1, '0', 2692.80, '空三按10％计算');
INSERT INTO `cmc_settle_work` VALUES (1931, '1648881415047870364', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 6, 1, '0', 2376.00, '联测已知点');
INSERT INTO `cmc_settle_work` VALUES (1932, '1648881415047870364', '外业-高程测量/水准测量', 0, 22.159, 0.98, '0', 3908.80, '三角高程按0.7计算，四等单程双测增加0.4');
INSERT INTO `cmc_settle_work` VALUES (1933, '1648881415047870322', '外业-地形图测绘/地形图(激光)测绘', 0, 27.863, 1, '1', 42351.80, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1934, '1648881415047870280', '外业-其他/进出场', 0, 4, 1, NULL, 1200.00, '2人2天');
INSERT INTO `cmc_settle_work` VALUES (1935, '1648881415047870322', '内业-激光制图/激光数据制作地形图', 0, 27.863, 1, '0', 32878.30, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1936, '1648881415047870322', '内业-DOM/DOM制作', 0, 27.863, 1, '0', 8358.90, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1937, '1648881415047870322', '内业-DEM、地形面/DEM、三维地形面制作', 0, 18.579, 1, '0', 8360.60, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (1938, '1648881415047870322', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '0', 1600.00, '2人*2天');
INSERT INTO `cmc_settle_work` VALUES (1939, '1648881415047870322', '外业-其他/进出场', 0, 12, 1, '1', 3960.00, '6人*2天');
INSERT INTO `cmc_settle_work` VALUES (1940, '1648881415047870322', '租车', 0, 10, 1, '0', 7000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1941, '1648881415047870264', '外业-地形图测绘/地形图(无人机)测绘', 0, 5.096, 1.5, '0', 10319.40, '一号厂址。测绘工程中心完成。');
INSERT INTO `cmc_settle_work` VALUES (1942, '1648881415047870357', '内业-航测/地形图航测', 0, 2.48, 1.1, '0', 4910.40, '边坝县示范区0.48km²、洛隆县示范区1.21km²、丁青县示范区0.79km²；空三增加10％。');
INSERT INTO `cmc_settle_work` VALUES (1943, '1648881415047870357', '内业-航测/地形图航测', 0, 1.05, 1.1, '0', 5428.50, '边坝县光伏布置0.11km²、洛隆县光伏布置0.03km²、丁青县光伏布置0.01km²、边坝县取水构筑物0.08km²、洛隆县');
INSERT INTO `cmc_settle_work` VALUES (1944, '1648881415047870357', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 13, 1.5, '0', 3705.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1945, '1648881415047870299', '外业-地形图测绘/地形图(无人机)测绘', 0, 0, 0, '0', 0.00, '委外完成');
INSERT INTO `cmc_settle_work` VALUES (1946, '1648881415047870299', '内业-航测/地形图航测', 0, 10.37, 0, '0', 0.00, '委外完成');
INSERT INTO `cmc_settle_work` VALUES (1947, '1648881415047870299', '内业-DEM、地形面/DEM、三维地形面制作', 0, 10.37, 1, '0', 2074.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1948, '1648881415047870299', '外业-其他/进出场', 0, 6, 1, '1', 1980.00, '3人*2天');
INSERT INTO `cmc_settle_work` VALUES (1949, '1648881415047870276', '租车', 0, 33, 1, NULL, 13200.00, '现场租用出租车接送，平均一天400元（含油费），合计用车33天');
INSERT INTO `cmc_settle_work` VALUES (1950, '1648881415047870357', '外业-高程测量/水准测量', 0, 20.902, 1.05, '0', 3950.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (1951, '1648881415047870357', '外业-地形图测绘/地形图(无人机)测绘', 0, 1.05, 1.5, '0', 12048.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (1952, '1648881415047870317', '外业-其他/配合测量', 0, 171, 1, '1', 68400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1953, '1648881415047870357', '外业-地形图测绘/地形图(无人机)测绘', 0, 2.48, 1.5, '0', 10546.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (1954, '1648881415047870357', '外业-其他/配合测量', 0, 8, 1.5, '1', 4800.00, '杨为康、张杰、黄建春、罗友权4人，2次转场');
INSERT INTO `cmc_settle_work` VALUES (1955, '1648881415047870357', '外业-航飞/无人机航飞(飞行项目）', 0, 6, 1.5, '0', 3600.00, '杨为康、罗友权2人飞行，1个测区1天');
INSERT INTO `cmc_settle_work` VALUES (1956, '1648881415047870357', '外业-其他/进出场', 0, 20, 1, '1', 6600.00, '杨为康、张杰、黄建春、罗友权4人，成都出发进场3天，边坝出发到米林项目2天');
INSERT INTO `cmc_settle_work` VALUES (1957, '1648881415047870410', '两河口工程2019年度先进评选奖金', 0, 1, 1, NULL, 8000.00, '两河口测量中心项目第34期合同结算单');
INSERT INTO `cmc_settle_work` VALUES (1958, '1648881415047870410', '两河口工程2020年度先进评选奖金', 0, 1, 1, NULL, 17000.00, '两河口测量中心项目第37期合同结算单');
INSERT INTO `cmc_settle_work` VALUES (1959, '1648881415047870315', '外业-其他/进出场', 0, 8, 1, '1', 2640.00, '4人*2天');
INSERT INTO `cmc_settle_work` VALUES (1960, '1648881415047870315', '租车', 0, 45, 1, '0', 33750.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1961, '1648881415047870400', '硝厂沟地形图测绘', 0, 0, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (1962, '1648881415047870400', '控制点测量', 0, 0, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (1963, '1648881415047870400', '项目管理费', 0, 1, 1, '0', 1500.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1964, '1648881415047870406', '外业-公路测量/公路控制网点土建', 0, 3, 1, '0', 450.00, '水平位移基准点地面标土建');
INSERT INTO `cmc_settle_work` VALUES (1965, '1648881415047870408', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.386, 1, '0', 1094.30, '测绘工程中心完成。');
INSERT INTO `cmc_settle_work` VALUES (1966, '1648881415047870408', '外业-地形图测绘/地形图外业实测', 0, 0.228, 1, '0', 1436.40, '水下地形测量。测绘工程中心完成。');
INSERT INTO `cmc_settle_work` VALUES (1967, '1648881415047870408', '内业-航测/地形图航测', 0, 0.614, 1.1, '0', 1215.70, '测绘工程中心完成（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (1968, '1648881415047870408', '外业-断面测量/断面测量', 0, 3, 1, '0', 270.00, '测绘工程中心完成。');
INSERT INTO `cmc_settle_work` VALUES (1969, '1648881415047870408', '外业-断面测量/断面测量', 0, 0.889, 1, '0', 506.70, '横断面测量');
INSERT INTO `cmc_settle_work` VALUES (1970, '1648881415047870408', '外业-断面测量/断面测量', 0, 5.155, 0.6, '0', 1763.00, '同时水边线测量');
INSERT INTO `cmc_settle_work` VALUES (1971, '1648881415047870408', '外业-特征点测量', 0, 319, 0.5, '0', 2871.00, '建筑物简要轮廓及地面高程测量。');
INSERT INTO `cmc_settle_work` VALUES (1972, '1648881415047870408', '外业-其他/进出场', 0, 9, 1, '0', 2700.00, '3人*2天');
INSERT INTO `cmc_settle_work` VALUES (1973, '1648881415047870400', '硝厂沟地形图测绘', 0, 15000, 1, NULL, NULL, NULL);
INSERT INTO `cmc_settle_work` VALUES (1974, '1648881415047870406', '外业-公路测量/公路控制网点土建', 0, 4, 1, '0', 600.00, '垂直位移基准点及校核基点');
INSERT INTO `cmc_settle_work` VALUES (1975, '1648881415047870406', '外业-公路测量/公路控制网点土建', 0, 10, 1, '0', 1000.00, '集镇水平位移监测点土建');
INSERT INTO `cmc_settle_work` VALUES (1976, '1648881415047870406', '外业-公路测量/公路控制网点土建', 0, 24, 1, '0', 2400.00, '断面垂直位移监测点土建');
INSERT INTO `cmc_settle_work` VALUES (1977, '1648881415047870406', '外业-公路测量/公路控制网点土建', 0, 10, 1, '0', 1000.00, '裂缝检测点');
INSERT INTO `cmc_settle_work` VALUES (1978, '1648881415047870406', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 3, 0.6, '0', 1188.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1979, '1648881415047870406', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 2, 1, '0', 792.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1980, '1648881415047870406', '外业-高程测量/水准测量', 0, 11.71, 1, '0', 4918.20, '垂直位移基准点水准联测');
INSERT INTO `cmc_settle_work` VALUES (1981, '1648881415047870410', '两河口工程2021年度先进评选奖金', 0, 1, 1, NULL, 12000.00, '两洞口测量中心延期服务第4期结算单');
INSERT INTO `cmc_settle_work` VALUES (1982, '1648881415047870410', '两河口工程2022年度先进评选奖金', 0, 1, 1, NULL, 9000.00, '两洞口测量中心延期服务第8期结算单');
INSERT INTO `cmc_settle_work` VALUES (1983, '1648881415047870410', '两河口水电站工程测量中心2022年度测绘服务', 0, 1, 1, '0', 620000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1984, '1648881415047870393', '三等GNSS测量（委外）', 0, 8, 1, '0', 0.00, '含引测4点');
INSERT INTO `cmc_settle_work` VALUES (1985, '1648881415047870393', '四等三角高程测量（单程）（委外）', 0, 27.5, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1986, '1648881415047870232', '测绘局坐标转换/坐标系转换', 0, 1, 1, '0', 300.00, 'cors数据采集解算');
INSERT INTO `cmc_settle_work` VALUES (1987, '1648881415047870393', '1:1000地形图测绘（委外）', 0, 2.7, 1, '0', 0.00, '1.84km²为修补测');
INSERT INTO `cmc_settle_work` VALUES (1988, '1648881415047870393', '1:500地形图测绘（委外）', 0, 0.05, 1, '0', 0.00, '委外补测');
INSERT INTO `cmc_settle_work` VALUES (1989, '1648881415047870393', '水下地形图测量（委外）', 0, 0.2, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1990, '1648881415047870326', '外业-公路测量/公路中桩、角桩测设', 0, 106, 1, '1', 2120.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (1991, '1648881415047870326', '外业-断面测量/断面测量', 0, 0.308, 1, '1', 326.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (1992, '1648881415047870326', '外业-其他/配合测量', 0, 6, 1, '1', 2400.00, '3人*2天，现场交桩。');
INSERT INTO `cmc_settle_work` VALUES (1993, '1648881415047870326', '民工费', 0, 31, 1, '1', 9300.00, '聘请民工辅助参与测量工作，每人300元，共31个工。');
INSERT INTO `cmc_settle_work` VALUES (1994, '1648881415047870326', '基础设施分公司人员现场开支', 0, 1, 1, '1', 33143.00, '餐费8375、住宿费19668、民工费5100。');
INSERT INTO `cmc_settle_work` VALUES (1995, '1648881415047870326', '外业-其他/进出场', 0, 16, 1, '1', 5280.00, '4人*4天，单边需2天。');
INSERT INTO `cmc_settle_work` VALUES (1996, '1648881415047870388', '坐标转换及高程计算', 0, 1, 1, '0', 600.00, '由自然资源部第三大地测量队解算1985国家高程基准成果及1954北京坐标系成果所产的费用。');
INSERT INTO `cmc_settle_work` VALUES (1997, '1648881415047870314', '外业-地形图测绘/地形图外业实测', 0, 0.03, 1, '0', 189.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (1998, '1648881415047870367', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 4.36, 1, '1', 13254.40, '多吉坝址地形图测绘（测绘工程中心）');
INSERT INTO `cmc_settle_work` VALUES (1999, '1648881415047870314', '内业-编图/地形图数字化', 0, 0.03, 1, '0', 19.80, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2000, '1648881415047870314', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 4, 1, '0', 760.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2001, '1648881415047870314', '外业-特征点测量', 0, 29, 1, '0', 522.00, '泄洪洞出口右岸局部防护损毁处的坐标测量');
INSERT INTO `cmc_settle_work` VALUES (2002, '1648881415047870314', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '3人*2天');
INSERT INTO `cmc_settle_work` VALUES (2003, '1648881415047870388', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.545, 1, '0', 1545.10, '测绘工程中心完成。牛棚子沟泥石流治理范围。');
INSERT INTO `cmc_settle_work` VALUES (2004, '1648881415047870388', '内业-航测/地形图航测', 0, 0.545, 1.1, '0', 0.00, '委外完成。牛棚子沟泥石流治理范围。');
INSERT INTO `cmc_settle_work` VALUES (2005, '1648881415047870388', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.179, 1, '0', 1369.30, '测绘工程中心完成。牛棚子沟泥石流治理范围。');
INSERT INTO `cmc_settle_work` VALUES (2006, '1648881415047870431', '内业-航测/地形图航测', 0, 0.254, 1.1, '0', 1313.20, '空三增加10％；');
INSERT INTO `cmc_settle_work` VALUES (2007, '1648881415047870367', '外业-地形图测绘/地形图外业实测', 0, 0.07, 1, '1', 532.00, '多吉坝址水下地形图测绘（测绘工程中心）');
INSERT INTO `cmc_settle_work` VALUES (2008, '1648881415047870367', '内业-激光制图/激光数据制作地形图', 0, 4.43, 1, '0', 5227.40, '多吉坝址地形图测绘（航测遥感中心）');
INSERT INTO `cmc_settle_work` VALUES (2009, '1648881415047870367', '外业-地形图测绘/地形图(激光)测绘', 0, 1.77, 1, '1', 2690.40, '木灰坝址地形图测绘（测绘工程中心）');
INSERT INTO `cmc_settle_work` VALUES (2010, '1648881415047870367', '内业-激光制图/激光数据制作地形图', 0, 1.77, 1, '0', 2088.60, '木灰坝址地形图测绘（航测遥感中心）');
INSERT INTO `cmc_settle_work` VALUES (2011, '1648881415047870367', '外业-地形图测绘/地形图(激光)测绘', 0, 1, 1, '1', 1520.00, '日衣变形体地形图测绘（测绘工程中心）');
INSERT INTO `cmc_settle_work` VALUES (2012, '1648881415047870431', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.254, 1, '0', 1943.10, NULL);
INSERT INTO `cmc_settle_work` VALUES (2013, '1648881415047870431', '外业-公路测量/公路中桩、角桩测设', 0, 40, 1, '0', 720.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2014, '1648881415047870431', '外业-航飞/无人机航飞(飞行项目）', 0, 1, 1, '0', 400.00, '其中地形图2人（含驾驶员）2天；视频拍摄3人1天');
INSERT INTO `cmc_settle_work` VALUES (2015, '1648881415047870315', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 4, 1.25, '0', 2500.00, '测绘工程中心完成（新建点）');
INSERT INTO `cmc_settle_work` VALUES (2016, '1648881415047870315', '外业-高程测量/三角高程测量、单程双测', 0, 9.148, 1.25, '0', 2017.10, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2017, '1648881415047870315', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.38, 1.25, '0', 1346.60, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2018, '1648881415047870315', '内业-航测/地形图航测', 0, 0.38, 1.1, '0', 752.40, '航测遥感中心完成（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (2019, '1648881415047870315', '外业-地形图测绘/地形图外业实测', 0, 0.192, 1.25, '0', 1512.00, '测绘工程中心完成（水下地形测量）');
INSERT INTO `cmc_settle_work` VALUES (2020, '1648881415047870294', '内业-激光制图/激光数据制作地形图', 0, 1.155, 1, '0', 1362.90, NULL);
INSERT INTO `cmc_settle_work` VALUES (2021, '1648881415047870275', '1:2000调绘、检查点', 0, 95.28, 0.122, '0', 34872.50, '奔戈柯拉平均海拔4100，增加35%系数，*0.5系数');
INSERT INTO `cmc_settle_work` VALUES (2022, '1648881415047870275', '1:2000外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 12, 1, '0', 4800.00, '石棉南桠7.4-7.7朱倪强王刚、熊艳华，');
INSERT INTO `cmc_settle_work` VALUES (2023, '1648881415047870275', '奔戈外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 33, 1.6, '0', 21120.00, '平均海拔4100，增加60%系数，奔戈6.13-6.23朱倪强、万龙卿、熊艳华');
INSERT INTO `cmc_settle_work` VALUES (2024, '1648881415047870275', '柯拉外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 12, 1.6, '0', 7680.00, '奔戈平均海拔4100，增加60%系数，柯拉王刚、万龙卿、熊艳华6.3-6.6');
INSERT INTO `cmc_settle_work` VALUES (2025, '1648881415047870275', '内业-激光数据预处理/激光数据预处理', 0, 108.3, 1, '0', 6498.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2026, '1648881415047870405', '库区淹没放大地形图测绘', 0, 62.82, 0.7, '0', 2638.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (2027, '1648881415047870275', '外业-其他/进出场', 0, 38, 1, '0', 11400.00, '理塘一行7人，进出场28人天。南桠一行5人，进出场10人天。');
INSERT INTO `cmc_settle_work` VALUES (2028, '1648881415047870442', '断面基点复测、维护及断面测量、淤积分析', 0, 1, 1, '0', 51800.00, '项目总体费用');
INSERT INTO `cmc_settle_work` VALUES (2029, '1648881415047870275', '奔戈光伏场址1:2000地形图测绘', 0, 86.47, 0.5, '0', 26805.70, '*0.5系数');
INSERT INTO `cmc_settle_work` VALUES (2030, '1648881415047870358', '三等GNSS测量', 0, 10, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (2031, '1648881415047870358', '四等三角高程测量', 0, 21, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (2032, '1648881415047870358', '永久界桩制作、测设等', 0, 657, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (2033, '1648881415047870358', '临时界桩制作、测设等', 0, 230, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (2034, '1648881415047870278', '外业-断面测量/断面测量', 0, 1, 1.1, '0', 99.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2035, '1648881415047870278', '内业-航测/地形图航测', 0, 0.801, 1, '1', 4405.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (2036, '1648881415047870358', '墙式标志牌制作、测设', 0, 3, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (2037, '1648881415047870358', '征地红线图制作1:2000', 0, 65, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (2038, '1648881415047870358', '点之记制作', 0, 657, 1, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (2039, '1648881415047870358', '实物指标调查配合测量', 0, 20, 1.25, '0', 9000.00, '廖绍毅、夏志斌ML项目进场，2022年1月13-1月22（10天）配合汪奎开展紫霞水电站库区移民征地调查工作，共计2');
INSERT INTO `cmc_settle_work` VALUES (2040, '1648881415047870358', '实物指标调查配合测量现场租车', 0, 1, 1, '0', 11014.00, '现场租车11天（租车费8800，加油1314元）11014元');
INSERT INTO `cmc_settle_work` VALUES (2041, '1648881415047870278', '外业-航飞/无人机航飞(飞行项目）', 0, 6, 1, '1', 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2042, '1648881415047870358', '外业-其他/配合测量', 0, 47, 1.25, '0', 21150.00, '现场配合委外单位开展技术指导、检查等工作');
INSERT INTO `cmc_settle_work` VALUES (2043, '1648881415047870358', '界桩测量现场租车', 0, 11, 1, '0', 8800.00, '公司未安排车辆，现场租车开展工作');
INSERT INTO `cmc_settle_work` VALUES (2044, '1648881415047870278', '外业-其他/进出场', 0, 16, 1, '0', 4800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2045, '1648881415047870278', '内业-编图/地形图数字化', 0, 0, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2046, '1648881415047870358', '外业-其他/进出场', 0, 4, 1, '1', 1320.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2047, '1648881415047870373', '外业-其他/配合测量', 0, 9, 1, '0', 3240.00, '现场寻找并采集两站控制点，制作转换模型，丁亮、黄建春、康科伟，3人3天');
INSERT INTO `cmc_settle_work` VALUES (2048, '1648881415047870373', '外业-其他/进出场', 0, 12, 1, '0', 3600.00, '赵 洪、夏志军、丁亮、周建伟、黄建春、康科伟6人');
INSERT INTO `cmc_settle_work` VALUES (2049, '1648881415047870358', '界桩布设', 0, 14, 1, '0', 2940.00, '技术质量部完成，最终紫霞合计布设界桩1496个，按人天统计，包含按业主要求多次修改工天');
INSERT INTO `cmc_settle_work` VALUES (2050, '1648881415047870379', '内业-激光制图/激光数据制作地形图', 0, 0.093, 1, '0', 0.00, '德方公司完成。');
INSERT INTO `cmc_settle_work` VALUES (2051, '1648881415047870358', '管理费', 0, 1, 1, '0', 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2052, '1648881415047870379', '外业-其他/配合测量', 0, 20, 1, '0', 7200.00, '坐标转换联测10人天、房屋建筑面积测量及数据处理6人天、无人船水下地形测量4人天');
INSERT INTO `cmc_settle_work` VALUES (2053, '1648881415047870379', '外业-航飞/无人机航飞(飞行项目）', 0, 8, 1, '0', 3200.00, '2人*4天');
INSERT INTO `cmc_settle_work` VALUES (2054, '1648881415047870379', '外业-其他/进出场', 0, 18, 1, '0', 5400.00, '9人*2天。');
INSERT INTO `cmc_settle_work` VALUES (2055, '1648881415047870349', '外业-地形图测绘/地形图外业实测', 0, 0.06, 1, '0', 1020.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2056, '1648881415047870232', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 10, 1, '0', 1900.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2057, '1648881415047870232', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 15, 1, '0', 6000.00, '共三人五天时间');
INSERT INTO `cmc_settle_work` VALUES (2058, '1648881415047870232', '内业-激光制图/激光数据制作地形图', 0, 2.98, 1, '0', 8195.00, '万里工业园区地形图测绘');
INSERT INTO `cmc_settle_work` VALUES (2059, '1648881415047870232', '外业-地形图测绘/地形图(激光)测绘', 0, 2.98, 1, '0', 10132.00, '万里工业园区地形图测绘');
INSERT INTO `cmc_settle_work` VALUES (2060, '1648881415047870232', '内业-激光制图/激光数据制作地形图', 0, 1.46, 1, '0', 905.20, '建平园区地形图测绘');
INSERT INTO `cmc_settle_work` VALUES (2061, '1648881415047870232', '外业-地形图测绘/地形图(激光)测绘', 0, 1.46, 1, '0', 876.00, '建平园区地形图测绘');
INSERT INTO `cmc_settle_work` VALUES (2062, '1648881415047870232', '外业-公路测量/公路参考点测量', 0, 86, 1, '0', 309.60, '固床坝特征点测量');
INSERT INTO `cmc_settle_work` VALUES (2063, '1648881415047870301', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 10, 1.15, '0', 1092.50, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2064, '1648881415047870301', '外业-地形图测绘/地形图(无人机)测绘', 0, 7.74, 0.2, '0', 2089.80, '测绘工程中心完成像控点、检查点测量。');
INSERT INTO `cmc_settle_work` VALUES (2065, '1648881415047870301', '内业-航测/地形图航测', 0, 7.74, 0, '0', 0.00, '委外完成');
INSERT INTO `cmc_settle_work` VALUES (2066, '1648881415047870301', '内业-DEM、地形面/DEM、三维地形面制作', 0, 7.74, 1, '0', 1548.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2067, '1648881415047870301', '外业-其他/进出场', 0, 6, 1, '1', 1980.00, '3人*2天');
INSERT INTO `cmc_settle_work` VALUES (2068, '1648881415047870301', '外业-航飞/无人机航飞(飞行项目）', 0, 12, 1, '1', 4800.00, '3人*4天');
INSERT INTO `cmc_settle_work` VALUES (2069, '1648881415047870360', '交通分院开支', 0, 1, 1, '0', 2866.00, '含交通分院的开支合计4585，按比例分配2866');
INSERT INTO `cmc_settle_work` VALUES (2070, '1648881415047870360', '外业-其他/进出场', 0, 12, 1, '0', 3600.00, '廖绍毅、王国文、康科伟3人，进出场各2天');
INSERT INTO `cmc_settle_work` VALUES (2071, '1648881415047870444', '项目委托费用', 0, 0.25, 0, '0', 238230.80, '参照合同金额952923元25%计算。');
INSERT INTO `cmc_settle_work` VALUES (2072, '1648881415047870267', '浦西房屋高程点测量', 0, 4, 1, '1', 1600.00, '平均海拔在2780米以上');
INSERT INTO `cmc_settle_work` VALUES (2073, '1648881415047870363', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 12, 1, '0', 6000.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2074, '1648881415047870232', '外业-断面测量/断面测量', 0, 6.2, 1, '0', 5456.00, '河道、固床坝断面测量');
INSERT INTO `cmc_settle_work` VALUES (2075, '1648881415047870232', '外业-断面测量/断面测量', 0, 5.4, 1, '0', 4752.00, '白岩河断面测量');
INSERT INTO `cmc_settle_work` VALUES (2076, '1648881415047870232', '外业-高程测量/三角高程测量', 0, 5, 1, '0', 630.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2077, '1648881415047870363', '外业-高程测量/三角高程测量', 0, 7.77, 1, '0', 979.00, '测绘工程中心完成。单程单测');
INSERT INTO `cmc_settle_work` VALUES (2078, '1648881415047870363', '高程解算', 0, 1, 1, '0', 500.00, '自然资源部第三大地测量队解算1985国家高程基准成果');
INSERT INTO `cmc_settle_work` VALUES (2079, '1648881415047870232', '外业-其他/进出场', 0, 18, 1, '0', 5400.00, '三次进出场，第一次5人，第二次1人，第三次3人。');
INSERT INTO `cmc_settle_work` VALUES (2080, '1648881415047870356', '内业-航测/地形图航测', 0, 0.55, 0.1, '0', 258.50, '空三按10％计算');
INSERT INTO `cmc_settle_work` VALUES (2081, '1648881415047870356', '内业-航测/地形图航测', 0, 3.8, 0.1, '0', 285.00, '空三按10％计算');
INSERT INTO `cmc_settle_work` VALUES (2082, '1648881415047870356', '内业-航测/地形图航测', 0, 0.55, 1, '0', 2585.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2083, '1648881415047870356', '内业-航测/地形图航测', 0, 3.8, 1, '0', 2850.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2084, '1648881415047870356', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 1, '0', 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2085, '1648881415047870356', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 2, 1, '0', 600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2086, '1648881415047870356', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.55, 1, '0', 4207.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (2087, '1648881415047870356', '外业-地形图测绘/地形图(无人机)测绘', 0, 3.8, 1, '0', 5130.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2088, '1648881415047870356', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2089, '1648881415047870356', '外业-其他/进出场', 0, 10, 1, '0', 3000.00, '丁亮、黄建春、王刚、朱倪强、康科伟5人');
INSERT INTO `cmc_settle_work` VALUES (2090, '1648881415047870353', '内业-DEM、地形面/DEM、三维地形面制作', 0, 9.88, 1, '0', 0.00, '中水德方完成');
INSERT INTO `cmc_settle_work` VALUES (2091, '1648881415047870353', '内业-航测/地形图航测', 0, 18.86, 0.3, '0', 4243.50, '2022年7月项目变更：将地形图制作成地形地类图，航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (2092, '1648881415047870353', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 10, 0.5, '0', 950.00, '现场采用刻石方式布设控制点');
INSERT INTO `cmc_settle_work` VALUES (2093, '1648881415047870353', '内业-DEM、地形面/DEM、三维地形面制作', 0, 18.86, 1, '0', 0.00, '中水德方完成');
INSERT INTO `cmc_settle_work` VALUES (2094, '1648881415047870291', '外业-地形图测绘/地形图(激光)测绘', 0, 0.78, 1, '1', 561.60, '金川测量中心完成');
INSERT INTO `cmc_settle_work` VALUES (2095, '1648881415047870291', '内业-激光制图/激光数据制作地形图', 0, 0.78, 1, '0', 483.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (2096, '1648881415047870291', '内业-DEM、地形面/DEM、三维地形面制作', 0, 0.78, 1, '0', 156.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2097, '1648881415047870291', '内业-编图/地形图数字化', 0, 1.46, 1, '0', 963.60, '地址平面图数字化，1件。');
INSERT INTO `cmc_settle_work` VALUES (2098, '1648881415047870291', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 0, 0, '0', 0.00, '委外');
INSERT INTO `cmc_settle_work` VALUES (2099, '1648881415047870291', '内业-编图/地形图数字化', 0, 6, 1, '0', 1260.00, '1:100000地质平面图1件描图数字化，面积6509.90km²，2*3人天。测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2100, '1648881415047870291', '内业-编图/地形图数字化', 0, 6, 1, '0', 1260.00, '地质剖面图3件扫描图数字化，1*6人天。');
INSERT INTO `cmc_settle_work` VALUES (2101, '1648881415047870384', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 20, 1, '0', 2280.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2102, '1648881415047870384', '外业-高程测量/水准测量', 0, 70.6, 0.7, '0', 8895.60, '三角高程测量，附合高程线路');
INSERT INTO `cmc_settle_work` VALUES (2103, '1648881415047870384', '外业-断面测量/断面测量', 0, 5, 0.6, '0', 2100.00, '参照纵断面标准');
INSERT INTO `cmc_settle_work` VALUES (2104, '1648881415047870384', '外业-航飞/无人机航飞(飞行项目）', 0, 6, 1, '0', 2400.00, '2人（含驾驶员）3天，比较分散');
INSERT INTO `cmc_settle_work` VALUES (2105, '1648881415047870384', '外业-其他/进出场', 0, 16, 1, '1', 5280.00, '夏志军、黄安堂、黄建春、凌涛4人，进场2天、出场2天');
INSERT INTO `cmc_settle_work` VALUES (2106, '1648881415047870437', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 20, 1, '1', 11600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2107, '1648881415047870437', '外业-高程测量/三角高程测量、单程双测', 0, 50, 1, '1', 10290.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2108, '1648881415047870437', '外业-地形图测绘/地形图(激光)测绘', 0, 107.4, 1, '1', 163248.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2109, '1648881415047870437', '外业-地形图测绘/地形图外业实测', 0, 6.5, 1, '1', 49400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2110, '1648881415047870437', '外业-地形图测绘/地形图(激光)测绘', 0, 5.7, 1, '1', 22800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2111, '1648881415047870437', '外业-地形图测绘/地形图外业实测', 0, 0.3, 1, '1', 6000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2112, '1648881415047870437', '外业-地形图测绘/地形图(激光)测绘', 0, 11.1, 1, '1', 7992.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2113, '1648881415047870437', '外业-其他/进出场', 0, 64, 1, '1', 21120.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2114, '1648881415047870437', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 200, 1.6, '1', 160000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2115, '1648881415047870418', '外业-地形图测绘/地形图(激光)测绘', 0, 28.92, 0.5, '0', 49164.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2116, '1648881415047870437', '民工费', 0, 1, 1, '1', 25480.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2117, '1648881415047870437', '租车费', 0, 1, 1, '1', 87527.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2118, '1648881415047870437', '加油费', 0, 1, 1, '1', 21755.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2119, '1648881415047870437', '进出场机票', 0, 1, 1, '1', 41127.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (2120, '1648881415047870437', '物流托运', 0, 1, 1, '1', 6135.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2121, '1648881415047870434', '工程区地形图测绘（含措格龙沟水下地形）', 0, 18.09, 1, '0', 4341.60, '点云成图');
INSERT INTO `cmc_settle_work` VALUES (2122, '1648881415047870434', '内业-比例尺缩放/地形图比例尺缩放', 0, 5.91, 1.2, '0', 510.60, '2000地形图缩编5000');
INSERT INTO `cmc_settle_work` VALUES (2123, '1648881415047870434', '工程区三维地形面制作（含措格龙沟水下地形）', 0, 24, 1, '0', 1680.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2124, '1648881415047870434', '上、下水库地形地类图测绘（含措格龙沟水下地形）', 0, 5.91, 1.3, '0', 4763.50, '地形地类图增加 30%');
INSERT INTO `cmc_settle_work` VALUES (2125, '1648881415047870434', '上、下水库三维地形面制作（含措格龙沟水下地形）', 0, 5.91, 1, '0', 1182.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2126, '1648881415047870434', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 9, 1.5, '0', 5400.00, '平均海拔3595，系数1.5，飞行组3人，飞行3天，共计9个人天');
INSERT INTO `cmc_settle_work` VALUES (2127, '1648881415047870434', '内业-激光数据预处理/激光数据预处理', 0, 29.49, 1, '0', 1769.40, '整个项目点云按照2000标准采集和处理');
INSERT INTO `cmc_settle_work` VALUES (2128, '1648881415047870447', '内业-航测/地形图航测', 0, 1.1, 1.1, '0', 2178.00, '含空三10%');
INSERT INTO `cmc_settle_work` VALUES (2129, '1648881415047870447', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.2, 1.05, '0', 1606.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (2130, '1648881415047870447', '外业-地形图测绘/地形图(无人机)测绘', 0, 1.1, 1.05, '0', 3274.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (2131, '1648881415047870447', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 4, 1.05, '0', 2100.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2132, '1648881415047870447', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 2, 1.05, '0', 630.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2133, '1648881415047870447', '外业-导线测量/导线测量、四等高程', 0, 13.5, 1.05, '0', 4791.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (2134, '1648881415047870447', '外业-其他/配合测量', 0, 6, 1.05, '0', 2268.00, '现场配合开展管线测量');
INSERT INTO `cmc_settle_work` VALUES (2135, '1648881415047870447', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '0', 1600.00, '两处');
INSERT INTO `cmc_settle_work` VALUES (2136, '1648881415047870447', '外业-其他/进出场', 0, 8, 1, '0', 2400.00, '夏志军、王国文、黄安堂、陈建贤4人');
INSERT INTO `cmc_settle_work` VALUES (2137, '1648881415047870401', '内业-激光制图/激光数据制作地形图', 0, 0.42, 1, '0', 495.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (2138, '1648881415047870282', '内业-三维模型/实景三维模型制作', 0, 2.21, 1, '0', 994.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (2139, '1648881415047870346', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 8, 1, '0', 1520.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2140, '1648881415047870346', '外业-高程测量/三角高程测量、单程双测', 0, 3, 1, '0', 529.20, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2141, '1648881415047870346', '外业-地形图测绘/地形图(激光)测绘', 0, 0.55, 1, '0', 1870.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2142, '1648881415047870346', '内业-激光制图/激光数据制作地形图', 0, 0.55, 1, '0', 1512.50, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (2143, '1648881415047870346', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 2, 1, '0', 800.00, '激光技术中心完成（刘媛媛、陈建贤）');
INSERT INTO `cmc_settle_work` VALUES (2144, '1648881415047870346', '内业-激光数据预处理/激光数据预处理', 0, 0.55, 1, '0', 99.00, '激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (2145, '1648881415047870346', '外业-其他/进出场', 0, 4, 1, '0', 1200.00, '2人*4天');
INSERT INTO `cmc_settle_work` VALUES (2146, '1648881415047870282', '外业-航飞/无人机航飞(飞行项目）', 0, 1, 1.25, '0', 450.00, '平均海拔3700，增加0.25系数');
INSERT INTO `cmc_settle_work` VALUES (2147, '1648881415047870282', '外业-地形图测绘/地形图(无人机)测绘', 0, 2.21, 1.25, '0', 7831.70, '平均海拔3700，增加0.25系数');
INSERT INTO `cmc_settle_work` VALUES (2148, '1648881415047870282', '外业-其他/进出场', 0, 8, 1, '0', 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2149, '1648881415047870282', '内业-DOM/DOM制作', 0, 2.21, 1, '0', 663.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2150, '1648881415047870291', '地形图拼接', 0, 1, 1, NULL, 210.00, '甲方提供的地形图数据进行拼接、编辑处理。1*1人天。');
INSERT INTO `cmc_settle_work` VALUES (2151, '1648881415047870291', '项目管理费', 0, 2, 1, '0', 420.00, '外协数据采集管理');
INSERT INTO `cmc_settle_work` VALUES (2152, '1648881415047870353', '外业-地形图测绘/地形图(无人机)测绘', 0, 18.86, 1, '0', 25461.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2153, '1648881415047870353', '外业-地形图测绘/地形图(无人机)测绘', 0, 9.88, 1, '0', 4001.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (2154, '1648881415047870353', '外业-地形图测绘/地形图(无人机)测绘', 0, 18.86, 0.3, '0', 7638.30, '2022年7月项目变更：将地形图制作成地形地类图');
INSERT INTO `cmc_settle_work` VALUES (2155, '1648881415047870353', '测绘局高程转换', 0, 1, 1, '0', 500.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2156, '1648881415047870353', '外业-其他/进出场', 0, 14, 1, '0', 4200.00, '地形图测绘夏志军、刘轩庭、赵成鸿、邓锡全4人参与，地类图测绘赵洪、雷佳川、凌涛3人。');
INSERT INTO `cmc_settle_work` VALUES (2157, '1648881415047870361', '内业-激光制图/激光数据制作地形图', 0, 18.99, 1, '0', 11773.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (2158, '1648881415047870363', '外业-地形图测绘/地形图(无人机)测绘', 0, 11.488, 1, '0', 15508.80, '测绘工程中心完成，航测');
INSERT INTO `cmc_settle_work` VALUES (2159, '1648881415047870363', '外业-地形图测绘/地形图外业实测', 0, 1.5, 1, '0', 4500.00, '测绘工程中心完成，实测。');
INSERT INTO `cmc_settle_work` VALUES (2160, '1648881415047870363', '内业-航测/地形图航测', 0, 12.988, 1.1, '0', 10715.10, '航测遥感中心完成（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (2161, '1648881415047870376', '复核测量', 0, 1, 1, '0', 15000.00, '项目总体费用，工作量零碎，建议按合同价30%结算');
INSERT INTO `cmc_settle_work` VALUES (2162, '1648881415047870363', '内业-编图/地形图数字化', 0, 1.5, 1, '0', 352.50, '航测遥感中心完成。现场地形变化，外业实测地形图编辑。');
INSERT INTO `cmc_settle_work` VALUES (2163, '1648881415047870236', '首部枢纽地形图测绘', 0, 0.58, 1, '0', 1595.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2164, '1648881415047870236', '风草沟渣场地形图测绘', 0, 0.84, 1, '0', 2310.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2165, '1648881415047870236', '猴子沟渣场地形图测绘', 0, 0.14, 1, '0', 385.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2166, '1648881415047870236', '亚拉沟渣场地形图测绘', 0, 0.16, 1, '0', 440.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2167, '1648881415047870236', '果儿巫沟渣场地形图测绘', 0, 0.1, 1, '0', 275.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2168, '1648881415047870286', '外业-地形图测绘/地形图(无人机)测绘', 0, 9, 1.15, '0', 4140.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2169, '1648881415047870286', '内业-激光制图/激光数据制作地形图', 0, 1, 1, '0', 400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2170, '1648881415047870363', '外业-其他/进出场', 0, 14, 1, '0', 4200.00, '7人*2天');
INSERT INTO `cmc_settle_work` VALUES (2171, '1648881415047870363', '航片采购费', 0, 1, 1, NULL, 15000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2172, '1648881415047870291', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '3人*2天。含驾驶员1人');
INSERT INTO `cmc_settle_work` VALUES (2173, '1648881415047870236', '巴郎村渣场地形图测绘', 0, 0.26, 1, '0', 715.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2174, '1648881415047870236', '外业激光数据采集', 0, NULL, 1, '0', 0.00, '委外作业');
INSERT INTO `cmc_settle_work` VALUES (2175, '1648881415047870370', '1:2000激光点云采集（委外）', 0, 13.69, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2176, '1648881415047870370', '外业-其他/配合测量', 0, 3, 1, '0', 1080.00, '现场探勘，配合业主无人机飞行选址');
INSERT INTO `cmc_settle_work` VALUES (2177, '1648881415047870370', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '赵洪、杨振、陈建贤3人');
INSERT INTO `cmc_settle_work` VALUES (2178, '1648881415047870281', '外业-地形图测绘/地形图外业实测', 0, 0.256, 1.15, '0', 5004.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (2179, '1648881415047870281', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2180, '1648881415047870281', '无人船租金', 0, 1, 1, NULL, 10000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2181, '1648881415047870281', '内业-编图/地形图数字化', 0, 0.256, 1, '0', 481.30, NULL);
INSERT INTO `cmc_settle_work` VALUES (2182, '1648881415047870325', '外业-其他/进出场', 0, 6, 1, '1', 1980.00, '3人*2天，含驾驶员1人，两河口测量中心完成');
INSERT INTO `cmc_settle_work` VALUES (2183, '1648881415047870325', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.155, 1.3, '1', 326.40, '地形地类图增加0.3。两河口测量中心完成');
INSERT INTO `cmc_settle_work` VALUES (2184, '1648881415047870325', '内业-航测/地形图航测', 0, 1, 1, '0', 400.00, '测绘工程中心完成，地形地类图含空三加密。成图面积0.155km²。');
INSERT INTO `cmc_settle_work` VALUES (2185, '1648881415047870236', '外业调绘补测、检查点', 0, 2.08, 0.198, '0', 7001.30, '外业由巴拉测量中心承担，平均海拔2700，增加10%，0.2*0.9*1.1');
INSERT INTO `cmc_settle_work` VALUES (2186, '1648881415047870236', '委外管理费用', 0, 5, 1, '0', 1050.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2187, '1648881415047870236', '外业进出场', 0, 4, 1, '0', 1200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2188, '1648881415047870370', '1:5000激光点云采集（委外）', 0, 6.14, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2189, '1648881415047870433', '外业-其他/进出场', 0, 16, 1, '1', 5280.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2190, '1648881415047870325', '外业-航飞/无人机航飞(飞行项目）', 0, 3, 1, '1', 1200.00, '3人*1天，含驾驶员1人，两河口测量中心完成');
INSERT INTO `cmc_settle_work` VALUES (2191, '1648881415047870383', '内业-航测/地形图航测', 0, 2.33, 1, '0', 0.00, '中水德方空三成图');
INSERT INTO `cmc_settle_work` VALUES (2192, '1648881415047870383', '外业-断面测量/断面测量（地形图生成）', 0, 2, 1, '0', 420.00, '测绘工程中心完成，包括资料搜集、断面数据提取及断面数据整理等工作');
INSERT INTO `cmc_settle_work` VALUES (2193, '1648881415047870383', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 5, 1.05, '0', 997.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (2194, '1648881415047870383', '外业-公路测量/公路中桩、角桩测设', 0, 40, 1.05, '0', 756.00, '工程点及矿权拐点测量参照此标准计算');
INSERT INTO `cmc_settle_work` VALUES (2195, '1648881415047870383', '外业-地形图测绘/地形图(无人机)测绘', 0, 2.33, 1.05, '0', 3302.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (2196, '1648881415047870383', '内业-坐标转换/坐标系转换', 0, 16, 1, '0', 240.00, '测绘工程中心完成，参照坐标转换标准。');
INSERT INTO `cmc_settle_work` VALUES (2197, '1648881415047870383', '坐标高程转换', 0, 1, 1, '0', 1000.00, '找测绘局转换平面及高程坐标');
INSERT INTO `cmc_settle_work` VALUES (2198, '1648881415047870383', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '0', 1600.00, '陈建贤、夏志军2人2天');
INSERT INTO `cmc_settle_work` VALUES (2199, '1648881415047870383', '外业-其他/进出场', 0, 14, 1, '0', 4200.00, '朱倪强、陈建贤、陈敏、夏志军，丁亮，黄建春，康科伟');
INSERT INTO `cmc_settle_work` VALUES (2200, '1648881415047870426', '内业-激光数据预处理/激光数据预处理', 0, 5, 1.6, '0', 600.00, '按最低标准');
INSERT INTO `cmc_settle_work` VALUES (2201, '1648881415047870340', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 10, 1, '1', 5800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2202, '1648881415047870340', '外业-高程测量/三角高程测量、单程双测', 0, 14.5, 1, '1', 2984.10, NULL);
INSERT INTO `cmc_settle_work` VALUES (2203, '1648881415047870340', '外业-地形图测绘/地形图(激光)测绘', 0, 9.5, 1.2, '1', 8208.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2204, '1648881415047870340', '外业-地形图测绘/地形图外业实测', 0, 0.5, 1, '1', 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2205, '1648881415047870340', '外业-地形图测绘/地形图(无人机)测绘', 0, 13.85, 1, '1', 6855.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (2206, '1648881415047870426', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 6, 1.2, '0', 3600.00, '朱倪强、熊艳华2023.06.02-6.04，平均海拔2800多米');
INSERT INTO `cmc_settle_work` VALUES (2207, '1648881415047870367', '外业-地形图测绘/地形图(激光)测绘', 0, 0.65, 1, '1', 988.00, '木灰料场地形图测绘（测绘工程中心）');
INSERT INTO `cmc_settle_work` VALUES (2208, '1648881415047870367', '内业-激光制图/激光数据制作地形图', 0, 0.65, 1, '0', 767.00, '木灰料场地形图测绘（航测遥感中心）');
INSERT INTO `cmc_settle_work` VALUES (2209, '1648881415047870367', '外业-地形图测绘/地形图(激光)测绘', 0, 2.44, 1, '1', 1756.80, '施工临时场地地形图测绘（测绘工程中心）');
INSERT INTO `cmc_settle_work` VALUES (2210, '1648881415047870367', '内业-激光制图/激光数据制作地形图', 0, 2.44, 1, '0', 1512.80, '施工临时场地地形图测绘（航测遥感中心）');
INSERT INTO `cmc_settle_work` VALUES (2211, '1648881415047870367', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 1, '1', 4620.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2212, '1648881415047870367', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 4, 1, '1', 2320.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2213, '1648881415047870367', '外业-高程测量/三角高程测量', 0, 21.32, 1, '1', 3134.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2214, '1648881415047870367', '外业-航飞/无人机航飞(飞行项目）', 0, 6, 1, '1', 2400.00, '2人*3天');
INSERT INTO `cmc_settle_work` VALUES (2215, '1648881415047870441', '地形图补测（内业）', 0, 0.66, 1, '0', 495.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2216, '1648881415047870441', '1:2000地形图放大1:500地形图', 0, 12.94, 0.7, '0', 0.00, '洪雄杰6.68平方公里，黄剑飞6.26平方公里。');
INSERT INTO `cmc_settle_work` VALUES (2217, '1648881415047870441', '1:500断面', 0, 2139.2, 0.02, '0', 29948.80, '点云制作，断面总数6875条，地理信息中心、航测遥感中心共同完成');
INSERT INTO `cmc_settle_work` VALUES (2218, '1648881415047870441', 'DEM制作', 0, 156.3, 0.4, '0', 12504.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2219, '1648881415047870367', '外业-航飞/无人机航飞(飞行项目）', 0, 12, 1, '1', 4800.00, '4人');
INSERT INTO `cmc_settle_work` VALUES (2220, '1648881415047870205', '内业-航测/地形图航测', 0, 128.365, 0.2, '0', 46211.40, '实景三维模型制作，按航测20%计算');
INSERT INTO `cmc_settle_work` VALUES (2221, '1648881415047870205', '库容计算', 0, 128.365, 1, '0', 5776.40, '参照DEM内业，按DEM内业结算标准的10%计算');
INSERT INTO `cmc_settle_work` VALUES (2222, '1648881415047870205', '外业-地形图测绘/地形图(无人机)测绘', 0, 128.365, 0.11, '0', 40030.60, '单价：像控点与检查点测量，共占20%，测区平均高程2000～2999m，增加10%');
INSERT INTO `cmc_settle_work` VALUES (2223, '1648881415047870205', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '公司安排朱倪强，陈敏，王金浩3人，进出场一次。两河口测量中心外业时从现场项目驻地出发，不计进出场。');
INSERT INTO `cmc_settle_work` VALUES (2224, '1648881415047870364', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 22.664, 1, '0', 27196.80, '卫片成图');
INSERT INTO `cmc_settle_work` VALUES (2225, '1648881415047870364', '外业-地形图测绘/地形图(激光)测绘', 0, 9.6, 1, '0', 5760.00, '点云成图');
INSERT INTO `cmc_settle_work` VALUES (2226, '1648881415047870364', '外业-地形图测绘/地形图外业实测', 0, 6.144, 1, '0', 18432.00, '外业修补测地形图，按测点面积统计');
INSERT INTO `cmc_settle_work` VALUES (2227, '1648881415047870364', '外业-地形图测绘/地形图外业实测', 0, 0.407, 1, '0', 1221.00, '中坝址0.088 km²；下坝址0.319 km²');
INSERT INTO `cmc_settle_work` VALUES (2228, '1648881415047870364', '外业-断面测量/断面测量', 0, 29.636, 1, '0', 6519.90, '60条');
INSERT INTO `cmc_settle_work` VALUES (2229, '1648881415047870364', '外业-断面测量/断面测量', 0, 3.5, 1, '0', 665.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2230, '1648881415047870364', '外业-断面测量/断面测量', 0, 60, 0.5, '0', 2700.00, '不埋石，按0.5计算');
INSERT INTO `cmc_settle_work` VALUES (2231, '1648881415047870364', '外业-断面测量/断面测量', 0, 38.718, 0.6, '0', 5110.80, '河道纵断面按0.6计算');
INSERT INTO `cmc_settle_work` VALUES (2232, '1648881415047870364', '外业-其他/进出场', 0, 23, 1, '1', 7590.00, '赵洪、杨为康、郑鹏、邓锡全4人开车进场，16人天；邓锡全开车出场4人天、赵洪、杨为康、郑鹏乘机出场，3人');
INSERT INTO `cmc_settle_work` VALUES (2233, '1648881415047870205', '资料整理、项目管理', 0, 1, 1, NULL, 12000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2234, '1648881415047870364', '租船', 0, 1, 1, '0', 2000.00, '现场使用机动船开展水下地形测量、人员设备运输等，实际支付2000元');
INSERT INTO `cmc_settle_work` VALUES (2235, '1648881415047870409', '四川大渡河双江口水电站枢纽工程测量中心2023年度测绘服务', 0, 1, 1, NULL, 587200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2236, '1648881415047870364', '外业-地形图测绘/地形图(激光)测绘', 0, 70.811, 1, '0', 5948.10, '点云生成等高线，卫片空三采集地物');
INSERT INTO `cmc_settle_work` VALUES (2237, '1648881415047870364', '春节外业补贴', 0, 4, 1, '0', 8000.00, '春节全勤外业，按2000元/人标准补贴');
INSERT INTO `cmc_settle_work` VALUES (2238, '1648881415047870364', '卫片采买', 0, 1, 1, '0', 39000.00, '卫片采买公对工转账，赵洪借款');
INSERT INTO `cmc_settle_work` VALUES (2239, '1648881415047870340', '外业-地形图测绘/地形图外业实测', 0, 1.18, 1, '1', 1298.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2240, '1648881415047870340', '内业-激光制图/激光数据制作地形图', 0, 8, 1.3, '0', 6448.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2241, '1648881415047870340', '内业-航测/地形图航测', 0, 2, 1.265, '0', 1897.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (2242, '1648881415047870340', '内业-航测/地形图航测', 0, 15.03, 1.1, '0', 3637.30, NULL);
INSERT INTO `cmc_settle_work` VALUES (2243, '1648881415047870451', '外业-断面测量/断面测量', 0, 6.2, 1, '0', 4340.00, '测绘工程中心完成。31条*200米。');
INSERT INTO `cmc_settle_work` VALUES (2244, '1648881415047870451', '外业-地形图测绘/地形图外业实测', 0, 0.07, 1, '0', 441.00, '测绘工程中心完成。(水下地形测绘)');
INSERT INTO `cmc_settle_work` VALUES (2245, '1648881415047870451', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.13, 1, '0', 368.60, '测绘工程中心完成。');
INSERT INTO `cmc_settle_work` VALUES (2246, '1648881415047870340', '内业-DEM、地形面/DEM、三维地形面制作', 0, 10, 1, '0', 2000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2247, '1648881415047870451', '内业-航测/地形图航测', 0, 0.13, 1.1, '0', 257.40, '航测遥感中心完成（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (2248, '1648881415047870340', '内业-DEM、地形面/DEM、三维地形面制作', 0, 15.03, 1, '0', 1052.10, NULL);
INSERT INTO `cmc_settle_work` VALUES (2249, '1648881415047870340', '外业-航飞/无人机航飞(飞行项目）', 0, 8, 1, '0', 3200.00, 'D2000影像采集');
INSERT INTO `cmc_settle_work` VALUES (2250, '1648881415047870340', '租船', 0, 1, 1, '1', 1500.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2251, '1648881415047870340', '外业-其他/进出场', 0, 20, 1, '0', 6000.00, '5人*4天（夏志军、赵明焱、蒋建虹、雷佳川、周建伟）');
INSERT INTO `cmc_settle_work` VALUES (2252, '1648881415047870451', '外业-断面测量/断面测量', 0, 31, 0.5, '0', 1395.00, '测绘工程中心完成。');
INSERT INTO `cmc_settle_work` VALUES (2253, '1648881415047870451', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '0', 1600.00, '2人*2天');
INSERT INTO `cmc_settle_work` VALUES (2254, '1648881415047870451', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '3人*2天');
INSERT INTO `cmc_settle_work` VALUES (2255, '1648881415047870439', '内业-航测/地形图航测', 0, 4.03, 1.1, '0', 7979.40, '航测遥感中心完成（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (2256, '1648881415047870439', '外业-地形图测绘/地形图(无人机)测绘', 0, 4.03, 1, '1', 13782.60, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2257, '1648881415047870439', '外业-断面测量/断面测量', 0, 16.418, 1, '1', 11328.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (2258, '1648881415047870439', '外业-其他/进出场', 0, 16, 1, '1', 5280.00, '4人*4天');
INSERT INTO `cmc_settle_work` VALUES (2259, '1648881415047870439', '外业-航飞/无人机航飞(飞行项目）', 0, 6, 1, '1', 2400.00, '2人*3天');
INSERT INTO `cmc_settle_work` VALUES (2260, '1648881415047870365', '二等地面三角形网平面观测墩标土建', 0, 9, 1.2, '1', 21600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2261, '1648881415047870365', '三等GNSS平面观测地面砼标土建', 0, 12, 1, '1', 4800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2262, '1648881415047870365', '二等基本水准点土建', 0, 3, 1.2, '1', 2880.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2263, '1648881415047870365', '二等普通水准点土建', 0, 9, 1, '1', 3600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2264, '1648881415047870365', '便道修筑', 0, 6, 1, '1', 6000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2265, '1648881415047870365', '三等GNSS平面控制网引测', 0, 12, 0.6, '1', 5544.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2266, '1648881415047870365', '二等GNSS平面连接网', 0, 8, 0.6, '1', 4176.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2267, '1648881415047870365', '二等地面三角形网观测', 0, 18, 1.6, '1', 25056.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2268, '1648881415047870365', '三等GNSS点观测', 0, 12, 0.6, '1', 5544.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2269, '1648881415047870365', '三等三角高程观测', 0, 45.6, 0.7, '1', 7660.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (2270, '1648881415047870365', '二等水准观测', 0, 43, 1, '1', 20640.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2271, '1648881415047870307', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.222, 1, '0', 629.40, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2272, '1648881415047870307', '外业-地形图测绘/地形图外业实测', 0, 0.18, 1, '0', 1134.00, '测绘工程中心完成。水下地形测量');
INSERT INTO `cmc_settle_work` VALUES (2273, '1648881415047870307', '内业-航测/地形图航测', 0, 0.402, 1.1, '0', 796.00, '航测遥感中心完成（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (2274, '1648881415047870307', '外业-断面测量/断面测量', 0, 2.71, 1, '0', 1544.70, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2275, '1648881415047870307', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 800.00, '2人*1天');
INSERT INTO `cmc_settle_work` VALUES (2276, '1648881415047870307', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '3人*2天');
INSERT INTO `cmc_settle_work` VALUES (2277, '1648881415047870418', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 10, 0.5, '0', 2500.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2278, '1648881415047870418', '外业-高程测量/水准测量', 0, 18.74, 0.5, '0', 1686.60, '单程双测');
INSERT INTO `cmc_settle_work` VALUES (2279, '1648881415047870418', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2280, '1648881415047870365', '选点及现场协调', 0, 12, 1, '1', 3600.00, '4人*3天（人员：黄安堂、彭永红、何涛、凌涛；8月5日-8月7日）');
INSERT INTO `cmc_settle_work` VALUES (2281, '1648881415047870365', '现场点位移交验收', 0, 5, 1, '1', 1500.00, '1人*5天（黄安堂，10月19日-10月23日）');
INSERT INTO `cmc_settle_work` VALUES (2282, '1648881415047870276', '外业-特征点测量', 0, 9, 1, '1', 3600.00, '业主要求进行悬高测量，现场3人（含司机）工作3天，合计9人天');
INSERT INTO `cmc_settle_work` VALUES (2283, '1648881415047870276', '外业-其他/进出场', 0, 20, 1, '0', 6000.00, '参与项目10人，算1次进出场');
INSERT INTO `cmc_settle_work` VALUES (2284, '1648881415047870276', '委外管理费', 0, 1, 1, NULL, 3000.00, '杨为康现场负责三个委外队伍管理及质量检查');
INSERT INTO `cmc_settle_work` VALUES (2285, '1648881415047870384', '内业-航测/地形图航测', 0, 45.5, 1, '0', 0.00, '委外（天合智汇）资料搜集、空三成图');
INSERT INTO `cmc_settle_work` VALUES (2286, '1648881415047870384', '内业-航测/地形图航测', 0, 0.42, 1, '0', 0.00, '云南子公司完成空三测图');
INSERT INTO `cmc_settle_work` VALUES (2287, '1648881415047870384', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.42, 1, '0', 0.00, '云南子公司完成（含飞行）');
INSERT INTO `cmc_settle_work` VALUES (2288, '1648881415047870384', '内业-航测/地形图航测', 0, 3.34, 1.1, '0', 2755.50, '空三增加10％；');
INSERT INTO `cmc_settle_work` VALUES (2289, '1648881415047870384', '外业-地形图测绘/地形图(无人机)测绘', 0, 48.84, 1, '0', 65934.00, '含新增3.34km²');
INSERT INTO `cmc_settle_work` VALUES (2290, '1648881415047870384', '外业-公路测量/公路控制网点土建', 0, 37, 1, '0', 3700.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2291, '1648881415047870384', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 37, 1, '0', 7030.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2292, '1648881415047870362', '外业-其他/进出场', 0, 6, 1, '1', 1980.00, '3人*2天');
INSERT INTO `cmc_settle_work` VALUES (2293, '1648881415047870438', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 31, 1, '1', 14322.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2294, '1648881415047870443', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 9, 1, '0', 1710.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2295, '1648881415047870443', '内业-坐标转换/坐标系转换', 0, 20, 1, '0', 300.00, '转换获取西安80坐标系，参照坐标转换标准');
INSERT INTO `cmc_settle_work` VALUES (2296, '1648881415047870443', '外业-地形图测绘/地形图外业实测', 0, 0.223, 1, '0', 3791.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2297, '1648881415047870443', '内业-编图/地形图数字化', 0, 0.223, 0.6, '0', 251.50, '测绘工程中心内业组数字化');
INSERT INTO `cmc_settle_work` VALUES (2298, '1648881415047870375', '外业-地形图测绘/地形图(无人机)测绘', 0, 4.7, 1, '0', 6345.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2299, '1648881415047870375', '外业-其他/配合测量', 0, 2, 1, '0', 720.00, '现场探勘及报备，赵洪、张明勇2人1天');
INSERT INTO `cmc_settle_work` VALUES (2300, '1648881415047870443', '外业-其他/配合测量', 0, 4, 1, '0', 1440.00, '业主反映地形图有问题，现场验证，主要是业主收集资料问题');
INSERT INTO `cmc_settle_work` VALUES (2301, '1648881415047870443', '外业-其他/进出场', 0, 18, 1, '0', 5400.00, '赵洪、丁亮、黄文峰、胡鳌、孔庆松、高斌傑、李泳龙、郑鹏、周建伟、陈建贤共9人参与');
INSERT INTO `cmc_settle_work` VALUES (2302, '1648881415047870375', '坐标转换', 0, 1, 1, '0', 500.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2303, '1648881415047870375', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '夏志军、廖绍毅、周建伟3人，进出场各1天');
INSERT INTO `cmc_settle_work` VALUES (2304, '1648881415047870438', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 21, 1, '1', 10962.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2305, '1648881415047870438', '外业-高程测量/水准测量', 0, 1.91, 1, '1', 916.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (2306, '1648881415047870438', '仪器租赁费', 0, 1, 1, NULL, 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2307, '1648881415047870375', '无人机飞行（委外）', 0, 1, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2308, '1648881415047870389', '内业-DEM、地形面/DEM、三维地形面制作', 0, 1.22, 1, '0', 549.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2309, '1648881415047870428', '内业-激光数据预处理/激光数据预处理', 0, 12.56, 1, '0', 753.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (2310, '1648881415047870428', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 9, 1.2, '0', 4320.00, '吴振、朱倪强、熊艳华2023.04.04-2023.04.06，3人3天，高差445');
INSERT INTO `cmc_settle_work` VALUES (2311, '1648881415047870262', '测绘局坐标转换', 0, 1, 1, '0', 300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2312, '1648881415047870277', '坝址区1:1000三维地形面制作', 0, 1.99, 1, '0', 597.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2313, '1648881415047870330', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 10, 1, '0', 1900.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2314, '1648881415047870330', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.065, 1, '0', 497.30, NULL);
INSERT INTO `cmc_settle_work` VALUES (2315, '1648881415047870330', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.037, 1, '0', 283.10, NULL);
INSERT INTO `cmc_settle_work` VALUES (2316, '1648881415047870330', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.053, 1, '0', 405.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (2317, '1648881415047870277', '厂址区1:1000三维地形面制作', 0, 0.96, 1, '0', 288.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2318, '1648881415047870277', '坝址区三维地形面制作', 0, 1.99, 1, '0', 597.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2319, '1648881415047870277', '厂址区三维地形面制作', 0, 0.96, 1, '0', 288.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2320, '1648881415047870262', '激光采集期间住宿', 0, 1, 1, '0', 480.00, '3个人，3天，2间房。');
INSERT INTO `cmc_settle_work` VALUES (2321, '1648881415047870277', '内业-坐标转换/坐标系转换', 0, 16, 1, '0', 240.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2322, '1648881415047870330', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.17, 1, '0', 1300.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (2323, '1648881415047870330', '内业-航测/地形图航测', 0, 0.326, 1.1, '0', 1685.40, '航测遥感中心完成（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (2324, '1648881415047870330', '长石坝管理用房立面测量', 0, 1, 1, '0', 300.00, '460.8平方米');
INSERT INTO `cmc_settle_work` VALUES (2325, '1648881415047870330', '游客中心房屋立面测量', 0, 1, 1, '0', 1000.00, '2938.1平方米');
INSERT INTO `cmc_settle_work` VALUES (2326, '1648881415047870330', '外业-其他/配合测量', 0, 2, 1, '0', 720.00, '1人*2天，查勘现场');
INSERT INTO `cmc_settle_work` VALUES (2327, '1648881415047870330', '外业-航飞/无人机航飞(飞行项目）', 0, 6, 1, '0', 2400.00, '激光技术部。3人*2天');
INSERT INTO `cmc_settle_work` VALUES (2328, '1648881415047870330', '外业-其他/进出场', 0, 16, 1, '0', 4800.00, '8人*2天');
INSERT INTO `cmc_settle_work` VALUES (2329, '1648881415047870438', '项目其他费用', 0, 1, 1, NULL, 12900.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2330, '1648881415047870433', '外业-其他/配合测量', 0, 12, 1, '1', 4800.00, '公路控制网点土建，项目中止，4人3天');
INSERT INTO `cmc_settle_work` VALUES (2331, '1648881415047870278', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.801, 1.1, '0', 6740.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (2332, '1648881415047870278', '外业-断面测量/断面测量', 0, 1.2, 1.1, '0', 924.00, '纵断面0.076km;横断面9条,合计不足200米。');
INSERT INTO `cmc_settle_work` VALUES (2333, '1648881415047870275', '集电线路1:2000地形图测绘', 0, 8.81, 0.5, '0', 2731.10, '*0.5系数');
INSERT INTO `cmc_settle_work` VALUES (2334, '1648881415047870275', '南桠光伏场址1:2000地形图测绘', 0, 13.02, 0.5, '0', 4036.20, '*0.5系数');
INSERT INTO `cmc_settle_work` VALUES (2335, '1648881415047870275', 'GNSS测量', 0, 500, 0.675, '0', 3375.00, '奔戈柯拉平均海拔4100，增加35%系数，*0.5系数');
INSERT INTO `cmc_settle_work` VALUES (2336, '1648881415047870275', 'GNSS测量E级', 0, 500, 0.5, '0', 2500.00, '南桠*0.5系数');
INSERT INTO `cmc_settle_work` VALUES (2337, '1648881415047870275', '三角高程测量、单程双测', 0, 22.122, 0.7, '0', 2787.40, '南桠四等，单程双测，系数增加40%，*0.5系数');
INSERT INTO `cmc_settle_work` VALUES (2338, '1648881415047870275', '三角高程测量、单程双测', 0, 22.068, 0.945, '0', 3753.80, '奔戈柯拉平均海拔4100，增加35%系数，四等，单程双测，系数增加40%，*0.5系数');
INSERT INTO `cmc_settle_work` VALUES (2339, '1648881415047870275', '1:2000调绘、检查点', 0, 13.02, 0.09, '0', 3515.40, '南桠*0.5系数');
INSERT INTO `cmc_settle_work` VALUES (2340, '1648881415047870419', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.019, 1.05, '0', 152.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (2341, '1648881415047870419', '外业-地形图测绘/地形图(无人机)测绘', 0, 1.978, 1.2075, '0', 6771.20, '带状增加15％系数');
INSERT INTO `cmc_settle_work` VALUES (2342, '1648881415047870419', '民工费用', 0, 200, 1, '0', 1200.00, '测区交通不便，聘请民工做向导，搬运仪器设备等');
INSERT INTO `cmc_settle_work` VALUES (2343, '1648881415047870419', '交通费', 0, 200, 1, '0', 1000.00, '现场因交通条件需要坐船过河，200/天');
INSERT INTO `cmc_settle_work` VALUES (2344, '1648881415047870419', '外业-其他/进出场', 0, 8, 1, '0', 2400.00, '刘轩庭、王刚、廖双、陈建贤4人');
INSERT INTO `cmc_settle_work` VALUES (2345, '1648881415047870152', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.2, 1.3, '0', 1989.00, '平均海拔2600，增加10%，地形地类增加20%');
INSERT INTO `cmc_settle_work` VALUES (2346, '1648881415047870152', '外业-航飞/无人机航飞(飞行项目）', 0, 1, 1, '0', 400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2347, '1648881415047870152', '外业-其他/配合测量', 0, 3, 1, '0', 1080.00, '钻孔测设');
INSERT INTO `cmc_settle_work` VALUES (2348, '1648881415047870152', '内业-航测/地形图航测', 0, 0.2, 1.25, '0', 1175.00, '空三增加10%，地形地类增加15%');
INSERT INTO `cmc_settle_work` VALUES (2349, '1648881415047870333', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.36, 1, '0', 2754.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2350, '1648881415047870333', '外业-航飞/无人机航飞(飞行项目）', 0, 1, 1, '0', 400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2351, '1648881415047870333', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '夏志军、邓静、张明勇3人');
INSERT INTO `cmc_settle_work` VALUES (2352, '1648881415047870308', '外业-地形图测绘/地形图(无人机)测绘', 0, 7.44, 1.35, '0', 13559.40, '测绘工程中心完成。');
INSERT INTO `cmc_settle_work` VALUES (2353, '1648881415047870308', '内业-航测/地形图航测', 0, 7.44, 1.1, '0', 6138.00, '航测遥感中心完成。（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (2354, '1648881415047870308', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 203.9, 1.35, '0', 99095.40, '测绘工程中心完成。');
INSERT INTO `cmc_settle_work` VALUES (2355, '1648881415047870420', '断面基点复测、维护及断面测量、淤积分析', 0, 1, 1, '0', 51800.00, '项目总体费用，按前期标准结算。');
INSERT INTO `cmc_settle_work` VALUES (2356, '1648881415047870305', '外业-高程测量/三角高程测量、单程双测', 0, 23.76, 1, '0', 4191.30, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2357, '1648881415047870305', '外业-地形图测绘/地形图(激光)测绘', 0, 23.99, 1, '0', 81566.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2358, '1648881415047870305', '内业-激光制图/激光数据制作地形图', 0, 21.46, 1, '0', 59015.00, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (2359, '1648881415047870305', '内业-激光制图/激光数据制作地形图', 0, 2.53, 1, '0', 0.00, '德方公司完成');
INSERT INTO `cmc_settle_work` VALUES (2360, '1648881415047870305', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 8, 1.2, '0', 3840.00, '激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (2361, '1648881415047870305', '外业-航飞/无人机航飞(飞行项目）', 0, 10, 1, '0', 4000.00, '2人*5天，新增五块较分散。');
INSERT INTO `cmc_settle_work` VALUES (2362, '1648881415047870305', '内业-激光数据预处理/激光数据预处理', 0, 23.99, 1, '0', 4318.20, '激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (2363, '1648881415047870305', '外业-其他/进出场', 0, 16, 1, '0', 4800.00, '8人*2次');
INSERT INTO `cmc_settle_work` VALUES (2364, '1648881415047870305', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 20, 1, '0', 3800.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2365, '1648881415047870429', '内业-激光数据预处理/激光数据预处理', 0, 1, 1, '0', 600.00, '零星小面积按最低标准。');
INSERT INTO `cmc_settle_work` VALUES (2366, '1648881415047870429', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 4, 1.2, '0', 1920.00, '王刚、康科伟2022.12.27-2022.12.28，高差500多米');
INSERT INTO `cmc_settle_work` VALUES (2367, '1648881415047870429', '采集住宿', 0, 1, 1, '0', 170.00, '按实际现场住宿');
INSERT INTO `cmc_settle_work` VALUES (2368, '1648881415047870333', '内业-航测/地形图航测', 0, 0.36, 1, '0', 1692.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2369, '1648881415047870308', '内业-航测/地形图航测', 0, 203.9, 1.1, '0', 49343.80, '航测遥感中心完成。（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (2370, '1648881415047870308', '内业-航测/地形图航测', 0, 11.46, 0.5, '0', 1260.60, '航测遥感中心完成。（修测2021年测绘地形图）');
INSERT INTO `cmc_settle_work` VALUES (2371, '1648881415047870308', '内业-比例尺缩放/地形图比例尺缩放', 0, 7.44, 1.2, '0', 642.80, '航测遥感中心完成。1:2000地形图部分缩编为1:5000');
INSERT INTO `cmc_settle_work` VALUES (2372, '1648881415047870308', '内业-DEM、地形面/DEM、三维地形面制作', 0, 6.88, 1, '0', 1376.00, '航测遥感中心完成。水域未生产，与地形图测绘面积有出入。');
INSERT INTO `cmc_settle_work` VALUES (2373, '1648881415047870361', '内业-激光数据预处理/激光数据预处理', 0, 3.37, 1, '0', 303.30, '成图面积3.37，按最低标准结算');
INSERT INTO `cmc_settle_work` VALUES (2374, '1648881415047870361', '内业-激光数据预处理/激光数据预处理', 0, 18.99, 1, '0', 1139.40, '按实际成图面积统计');
INSERT INTO `cmc_settle_work` VALUES (2375, '1648881415047870361', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 8, 1.1, '0', 4400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2376, '1648881415047870361', '外业-高程测量/水准测量', 0, 13.66, 1.078, '0', 2650.60, '单程双测');
INSERT INTO `cmc_settle_work` VALUES (2377, '1648881415047870361', '外业-地形图测绘/地形图(激光)测绘', 0, 3.37, 1.1, '0', 4670.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (2378, '1648881415047870361', '外业-地形图测绘/地形图(激光)测绘', 0, 18.99, 1.1, '0', 12533.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (2379, '1648881415047870361', '高程转换', 0, 1, 1, '0', 1000.00, '两次转换，验证已有控制点资料');
INSERT INTO `cmc_settle_work` VALUES (2380, '1648881415047870361', '民工费', 0, 3, 1, '0', 1800.00, '大黄蜂故障，聘请民工带路寻找');
INSERT INTO `cmc_settle_work` VALUES (2381, '1648881415047870361', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '刘轩庭、熊艳华、陈建贤3人（不包含飞行组人员）');
INSERT INTO `cmc_settle_work` VALUES (2382, '1648881415047870422', '外业-地形图测绘/地形图外业实测', 0, 0.16, 1, '0', 0.00, '机位及升压站地形图测量，德方子公司完成，人工实测并编辑成图');
INSERT INTO `cmc_settle_work` VALUES (2383, '1648881415047870422', '内业-激光制图/激光数据制作地形图', 0, 6.92, 1, '0', 4290.40, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (2384, '1648881415047870422', '外业-地形图测绘/地形图(激光)测绘', 0, 6.92, 1.1, '1', 5480.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (2385, '1648881415047870422', '外业-航飞/无人机航飞(飞行项目）', 0, 6, 1, '1', 2400.00, '2人3天（含补飞）');
INSERT INTO `cmc_settle_work` VALUES (2386, '1648881415047870422', '外业-其他/进出场', 0, 12, 1, '0', 3600.00, '夏志军、赵明焱、周建伟3人、2022年1月16日进场、1月19日撤场（因大雪封山）；夏志军、赵明焱、凌涛3人，20');
INSERT INTO `cmc_settle_work` VALUES (2387, '1648881415047870418', '内业-激光制图/激光数据制作地形图', 0, 28.92, 0.5, '0', 39765.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2388, '1648881415047870418', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 12, 0.8, '0', 3840.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2389, '1648881415047870418', '内业-激光数据预处理/激光数据预处理', 0, 28.92, 0.5, '0', 2602.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (2390, '1648881415047870387', '航测遥感中心', 0, 1, 1, '1', 957529.10, NULL);
INSERT INTO `cmc_settle_work` VALUES (2391, '1648881415047870387', '地理信息中心', 0, 1, 1, '1', 7560.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2392, '1648881415047870387', '激光技术中心', 0, 1, 1, '1', 287786.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (2393, '1648881415047870203', '朔石表面积测量、计算', 0, 28, 1, '0', 5880.00, '包括三维建模，表面积量测方法探索，表面积量测计算，报告等工作。');
INSERT INTO `cmc_settle_work` VALUES (2394, '1648881415047870387', '测绘工程中心', 0, 1, 1, '1', 2377798.10, NULL);
INSERT INTO `cmc_settle_work` VALUES (2395, '1648881415047870339', '外业-高程测量/三角高程测量、单程双测', 0, 22.55, 1, '1', 4640.80, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2396, '1648881415047870339', '外业-地形图测绘/地形图(激光)测绘', 0, 23.664, 1.2, '1', 43163.10, '测绘工程中心完成。第一批任务。地形地类图');
INSERT INTO `cmc_settle_work` VALUES (2397, '1648881415047870215', '1:500地形图测绘', 0, NULL, 1, NULL, NULL, '项目外委');
INSERT INTO `cmc_settle_work` VALUES (2398, '1648881415047870215', '引水线路地形图测绘', 0, NULL, 1, NULL, NULL, '项目外委');
INSERT INTO `cmc_settle_work` VALUES (2399, '1648881415047870423', '内业-航测/地形图航测', 0, 2.98, 1, '0', 0.00, '委外完成，航测成图');
INSERT INTO `cmc_settle_work` VALUES (2400, '1648881415047870423', '外业-地形图测绘/地形图(无人机)测绘', 0, 2.98, 1, '0', 4023.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2401, '1648881415047870423', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '0', 1600.00, '2人2天（含补飞）');
INSERT INTO `cmc_settle_work` VALUES (2402, '1648881415047870423', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '丁亮、邓锡全、康科伟3人');
INSERT INTO `cmc_settle_work` VALUES (2403, '1648881415047870260', '二等地面三角形网平面观测墩标', 0, 7, 1.2, '1', 16800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2404, '1648881415047870260', '三等GNSS平面观测地面砼标', 0, 20, 1, '1', 8000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2405, '1648881415047870260', '二等基本水准点', 0, 3, 1.2, '1', 2880.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2406, '1648881415047870260', '二等普通水准点', 0, 9, 1, '1', 3600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2407, '1648881415047870260', '便道修筑', 0, 7.5, 1, '1', 7500.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2408, '1648881415047870260', '三等GNSS平面控制网引测', 0, 7, 0.6, '1', 3234.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2409, '1648881415047870339', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 14, 1, '1', 8120.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2410, '1648881415047870339', '内业-激光制图/激光数据制作地形图', 0, 23.664, 1.3, '0', 36300.60, '航测遥感中心完成。第一批任务地形地类图');
INSERT INTO `cmc_settle_work` VALUES (2411, '1648881415047870339', '外业-地形图测绘/地形图(激光)测绘', 0, 2.37, 1.2, '1', 0.00, '德方公司完成。第二批任务。地形地类图');
INSERT INTO `cmc_settle_work` VALUES (2412, '1648881415047870339', '内业-激光制图/激光数据制作地形图', 0, 2.37, 1.3, '0', 3635.60, '航测遥感中心完成。第二批任务。地形地类图');
INSERT INTO `cmc_settle_work` VALUES (2413, '1648881415047870339', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 15, 1.6, '1', 9600.00, '激光技术中心完成。');
INSERT INTO `cmc_settle_work` VALUES (2414, '1648881415047870339', '内业-激光数据预处理/激光数据预处理', 0, 26.034, 1, '0', 2343.10, '激光技术中心完成。');
INSERT INTO `cmc_settle_work` VALUES (2415, '1648881415047870339', '激光技术中心现场采集住宿费', 0, 1, 1, '0', 680.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2416, '1648881415047870339', '内业-DOM/DOM制作', 0, 26.034, 1, '0', 7810.20, '航测遥感中心完成。');
INSERT INTO `cmc_settle_work` VALUES (2417, '1648881415047870339', '内业-DEM、地形面/DEM、三维地形面制作', 0, 26.034, 1, '0', 11715.30, '航测遥感中心完成。');
INSERT INTO `cmc_settle_work` VALUES (2418, '1648881415047870203', '外业-其他/无人机航飞', 0, 11, 1, '0', 4400.00, '2019年1月4日~2019年1月6日，14人天。2019年1月22日，2019年2月23日，2019年2月25日，6人天。');
INSERT INTO `cmc_settle_work` VALUES (2419, '1648881415047870339', '外业-其他/进出场', 0, 12, 1, '1', 3960.00, '4人*3天（杨为康、夏志斌、董旭鹏、凌涛）');
INSERT INTO `cmc_settle_work` VALUES (2420, '1648881415047870334', '巴楚河松多水电站坐标转换工作（2022C34）外业', 0, 2, 1, '1', 800.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2421, '1648881415047870334', '巴楚河松多水电站坐标转换工作（2022C34）内业', 0, 32, 1, '1', 480.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2422, '1648881415047870361', '内业-比例尺缩放/地形图比例尺缩放', 0, 3.37, 0.7, '0', 665.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (2423, '1648881415047870361', '内业-DEM、地形面/DEM、三维地形面制作', 0, 3.37, 1, '0', 1516.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (2424, '1648881415047870361', '内业-DEM、地形面/DEM、三维地形面制作', 0, 22.36, 1, '0', 4472.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2425, '1648881415047870361', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 27, 1.6, '0', 17280.00, '测区高差1600，增加60％，含进出场、寻飞机及刘媛媛现场飞行');
INSERT INTO `cmc_settle_work` VALUES (2426, '1648881415047870361', '飞行组住宿', 0, 1, 1, '0', 2430.00, '项目完成后未报账，按实际开支结算');
INSERT INTO `cmc_settle_work` VALUES (2427, '1648881415047870324', '内业-航测/地形图航测', 0, 1.687, 1, '0', 3036.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (2428, '1648881415047870324', '外业-地形图测绘/地形图(无人机)测绘', 0, 1.687, 1, '0', 4782.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (2429, '1648881415047870324', '外业-地形图测绘/地形图外业实测', 0, 0.603, 1, '0', 3798.90, '水下地形测量；');
INSERT INTO `cmc_settle_work` VALUES (2430, '1648881415047870324', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 800.00, '2处，1处2人天；');
INSERT INTO `cmc_settle_work` VALUES (2431, '1648881415047870324', '飞行批文办理', 0, 1, 1, '0', 12000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2432, '1648881415047870324', '坐标转换', 0, 1, 1, '0', 500.00, '测绘局转换获取图根控制点高程；');
INSERT INTO `cmc_settle_work` VALUES (2433, '1648881415047870324', '外业-其他/进出场', 0, 10, 1, '0', 3000.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2434, '1648881415047870252', '地形图测绘（内业）', 0, 2, 0.6, '0', 2256.00, '委外粗编部分及外业实测部分数字化，测绘工程中心内业组，按外业实测电子地形图数字化单价结算；');
INSERT INTO `cmc_settle_work` VALUES (2435, '1648881415047870252', '地形图测绘（内业）', 0, 4.68, 1.1, '0', 24195.60, '增加空三工作0.1、测图及数字化（测绘工程中心内业组2.09km²；航测遥感中心2.13km²；地理信息中心0.46 km²');
INSERT INTO `cmc_settle_work` VALUES (2436, '1648881415047870252', '地形图测绘（外业）', 0, 1.543, 1.1, '0', 28854.10, '测绘工程中心实测及粗编；测区分散，增加困难系数0.1。');
INSERT INTO `cmc_settle_work` VALUES (2437, '1648881415047870252', '地形图测绘（外业）', 0, 4.68, 0.45, '0', 35802.00, '航飞、像控及调绘（场地地形图0.05；管线和河道地形图4.63）；测区分散。');
INSERT INTO `cmc_settle_work` VALUES (2438, '1648881415047870252', '地形图测绘（内业）', 0, 56.65, 0.6, '0', 22433.40, '内业数字化，测绘工程中心内业组11.05km²、航测遥感中心45.60km²');
INSERT INTO `cmc_settle_work` VALUES (2439, '1648881415047870252', '地形图测绘（内业）', 0, 12.76, 1.1, '0', 25264.80, '空三（增加10％）、航测及数字化，测绘工程中心内业组1.091km²；航测遥感中心11.629km²；地理信息中心0.04 ');
INSERT INTO `cmc_settle_work` VALUES (2440, '1648881415047870252', '地形图测绘（外业）', 0, 80.63, 0.45, '0', 228586.10, '航飞、像控及调绘（管线和河道地形图测绘50.74；人居环境地形图29.89）。测区分散。');
INSERT INTO `cmc_settle_work` VALUES (2441, '1648881415047870252', 'GNSS测量', 0, 56, 1, '0', 36960.00, '新建GNSS点56点');
INSERT INTO `cmc_settle_work` VALUES (2442, '1648881415047870252', 'GNSS测量', 0, 5, 0.6, '0', 1980.00, '联测已知点5点，按单价的60％计算');
INSERT INTO `cmc_settle_work` VALUES (2443, '1648881415047870252', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 214, 0.7, '0', 28462.00, '利用RTK测量，埋石标志按70％');
INSERT INTO `cmc_settle_work` VALUES (2444, '1648881415047870252', '特征点测量', 0, 2151, 0.2, '0', 7743.60, '含化粪池底部高程点、排污口高程点、河底高程点。参照公路参考点结算标准结算');
INSERT INTO `cmc_settle_work` VALUES (2445, '1648881415047870252', '横断面', 0, 25.4, 1, '0', 22352.00, '127条，不足200m按200m计算。参照1:200断面测量结算标准，测区分散.');
INSERT INTO `cmc_settle_work` VALUES (2446, '1648881415047870252', '纵断面', 0, 6.05, 0.6, '0', 2069.10, '6条，河道纵断面按60％计算，按困难地类');
INSERT INTO `cmc_settle_work` VALUES (2447, '1648881415047870252', '无人机飞行及配合', 0, 69, 1, '0', 24840.00, '无人机飞行64人天、配合指范围5人天');
INSERT INTO `cmc_settle_work` VALUES (2448, '1648881415047870252', '外业-其他/进出场', 0, 52, 1, '0', 15600.00, '航飞按人天结算，进出场按标准。');
INSERT INTO `cmc_settle_work` VALUES (2449, '1648881415047870252', '外业-其他/进出场', 0, 140, 0.6, '0', 25200.00, '测区较近，往返当天可开展工作，按0.6结算。');
INSERT INTO `cmc_settle_work` VALUES (2450, '1648881415047870252', '委外费用支付', 0, 1, 1, '0', 10000.00, '已经借款支付委外曾涛10000元');
INSERT INTO `cmc_settle_work` VALUES (2451, '1648881415047870308', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '0', 1600.00, '2人*2天');
INSERT INTO `cmc_settle_work` VALUES (2452, '1648881415047870308', '外业-其他/进出场', 0, 12, 1, '0', 3600.00, '4人*2天 2人*2天。');
INSERT INTO `cmc_settle_work` VALUES (2453, '1648881415047870308', '租车', 0, 18, 1, NULL, 13500.00, '750元*18天');
INSERT INTO `cmc_settle_work` VALUES (2454, '1648881415047870308', '卫片采购费用', 0, 1, 1, NULL, 22000.00, '由杨卫总协调采购');
INSERT INTO `cmc_settle_work` VALUES (2455, '1648881415047870353', '无人机飞行（委外）', 0, 1, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2456, '1648881415047870353', '内业-航测/地形图航测', 0, 18.86, 1, '0', 0.00, '中水德方完成');
INSERT INTO `cmc_settle_work` VALUES (2457, '1648881415047870308', '内业-DEM、地形面/DEM、三维地形面制作', 0, 164.89, 1, '0', 11542.30, '航测遥感中心完成。');
INSERT INTO `cmc_settle_work` VALUES (2458, '1648881415047870332', '进出场', 0, 10, 1, '1', 3300.00, '5人参与：分别为黄安堂、邓静、彭永红、廖双、何涛。进场时间为2022年6月22日，退场时间为2022年7月17日');
INSERT INTO `cmc_settle_work` VALUES (2459, '1648881415047870332', '混凝土地面标选点和建造', 0, 8, 1, '1', 3200.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2460, '1648881415047870332', '边角网观测', 0, 13, 1, '1', 10010.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2461, '1648881415047870332', '三角高程测量', 0, 84, 0.7, '1', 14112.00, '三角高程按70%结算');
INSERT INTO `cmc_settle_work` VALUES (2462, '1648881415047870332', 'GNSS控制网观测', 0, 14, 1, '1', 10780.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2463, '1648881415047870332', '资料整编', 0, 1, 1, '1', 4000.00, '对2015年、2019年、2020年前后三次的成果资料与本次复测后合并整理，提交给城乡分公司');
INSERT INTO `cmc_settle_work` VALUES (2464, '1648881415047870407', '外业-地形图测绘/地形图(无人机)测绘', 0, 4.7, 1.1, '0', 14657.00, '测区平均高程2000～2999m，增加10%');
INSERT INTO `cmc_settle_work` VALUES (2465, '1648881415047870407', '外业-航飞/无人机航飞(飞行项目）', 0, 3, 1, '0', 1200.00, '瓦孜组连接道路补测无人机航飞');
INSERT INTO `cmc_settle_work` VALUES (2466, '1648881415047870407', '内业-航测/地形图航测', 0, 2.79, 1, '0', 5022.00, '码头地形图，利用两河口库区三维模型测图');
INSERT INTO `cmc_settle_work` VALUES (2467, '1648881415047870407', '内业-航测/地形图航测', 0, 1.91, 1.1, '0', 3781.80, '瓦孜组连接道路及补测地形图，内业空三，增加10%');
INSERT INTO `cmc_settle_work` VALUES (2468, '1648881415047870374', '外业-地形图测绘/地形图(无人机)测绘', 0, 1.36, 1, '0', 3855.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (2469, '1648881415047870374', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 800.00, '礼约河口因高速施工变化太大，采用无人机飞行补飞');
INSERT INTO `cmc_settle_work` VALUES (2470, '1648881415047870374', '外业-其他/进出场', 0, 6, 1, '0', 1800.00, '丁亮、黄建春、康科伟3人');
INSERT INTO `cmc_settle_work` VALUES (2471, '1648881415047870350', '内业-DOM/DOM制作', 0, 3.1, 1, '0', 465.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2472, '1648881415047870332', '往年控制点查勘和移交', 0, 15, 1, '1', 6000.00, '对2015年、2019年、2020年前后三次实施的不同等级控制点现场查勘，将现存控制点查勘后移交至甲方。本项工作');
INSERT INTO `cmc_settle_work` VALUES (2473, '1648881415047870396', '大唐观音岩水电站2023年度变形监测控制网复测及坝前淤积和坝后冲刷测量', 0, 1, 1, NULL, 115620.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2474, '1648881415047870201', '库区淹没放大地形图测绘', 0, 62.82, 1, NULL, 3769.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (2475, '1648881415047870403', '大唐观音岩水电站2022年度变形监测控制网复测及坝前淤积和坝后冲刷测量', 0, 1, 1, '0', 115620.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2476, '1648881415047870350', '内业-航测/地形图航测', 0, 3.1, 1.1, '0', 2557.50, '含空三10％');
INSERT INTO `cmc_settle_work` VALUES (2477, '1648881415047870397', '永久界桩制作、埋设等', 0, 187, 1, '0', 0.00, '委托林辉完成');
INSERT INTO `cmc_settle_work` VALUES (2478, '1648881415047870397', '加密界桩制作、埋设等', 0, 303, 1, '0', 0.00, '委托林辉完成');
INSERT INTO `cmc_settle_work` VALUES (2479, '1648881415047870397', '墙式标志牌制作、埋设等', 0, 2, 1, '0', 0.00, '委托林辉完成');
INSERT INTO `cmc_settle_work` VALUES (2480, '1648881415047870397', '界桩、墙式标志牌放线与测量', 0, 492, 1, '0', 0.00, '委托林辉完成');
INSERT INTO `cmc_settle_work` VALUES (2481, '1648881415047870397', '界桩点展绘、红线图制作', 0, 50, 1, '0', 0.00, '委托林辉完成');
INSERT INTO `cmc_settle_work` VALUES (2482, '1648881415047870397', '实物指标调查', 0, 56, 1, '0', 0.00, '委托林辉完成');
INSERT INTO `cmc_settle_work` VALUES (2483, '1648881415047870397', '界桩成果移交', 0, 1, 1, '0', 0.00, '部门牵头、林辉配合完成');
INSERT INTO `cmc_settle_work` VALUES (2484, '1648881415047870397', '外业-其他/配合测量', 0, 14, 1, '0', 5040.00, '现场指导及检查工作，赵洪、丁亮完成');
INSERT INTO `cmc_settle_work` VALUES (2485, '1648881415047870397', '委外管理工作', 0, 1, 1, '0', 2000.00, '含资料检查、报告编写及归档工作');
INSERT INTO `cmc_settle_work` VALUES (2486, '1648881415047870348', '永久界桩制作、埋设等', 0, 134, 1, '0', 0.00, '委托林辉完成');
INSERT INTO `cmc_settle_work` VALUES (2487, '1648881415047870348', '加密界桩制作、埋设等', 0, 129, 1, NULL, 0.00, '委托林辉完成');
INSERT INTO `cmc_settle_work` VALUES (2488, '1648881415047870348', '墙式标志牌制作、埋设等', 0, 2, 1, NULL, 0.00, '委托林辉完成');
INSERT INTO `cmc_settle_work` VALUES (2489, '1648881415047870348', '界桩、墙式标志牌放线与测量', 0, 472, 1, NULL, 0.00, '委托林辉完成');
INSERT INTO `cmc_settle_work` VALUES (2490, '1648881415047870348', '界桩点展绘、红线图制作', 0, 39, 1, NULL, 0.00, '委托林辉完成');
INSERT INTO `cmc_settle_work` VALUES (2491, '1648881415047870348', '实物指标调查', 0, 56, 1, NULL, 0.00, '委托林辉完成');
INSERT INTO `cmc_settle_work` VALUES (2492, '1648881415047870348', '界桩成果移交', 0, 1, 1, NULL, 0.00, '部门牵头、林辉配合完成');
INSERT INTO `cmc_settle_work` VALUES (2493, '1648881415047870348', '外业-其他/配合测量', 0, 12, 1, '0', 4320.00, '赵洪、丁亮完成，现场指导及检查工作');
INSERT INTO `cmc_settle_work` VALUES (2494, '1648881415047870348', '委外管理工作', 0, 1, 1, '0', 2000.00, '含资料检查、报告编写及归档工作');
INSERT INTO `cmc_settle_work` VALUES (2495, '1648881415047870348', '外业-其他/进出场', 0, 8, 1, '0', 2400.00, '赵洪、丁亮2人2次进出场');
INSERT INTO `cmc_settle_work` VALUES (2496, '1648881415047870348', '界桩布设', 0, 14, 1, '0', 2940.00, '技术质量部完成，2人7天，含老鹰岩二级界桩一起。其中水库淹没区共422个界桩（平水段148；耕地155；人居119');
INSERT INTO `cmc_settle_work` VALUES (2497, '1648881415047870350', '内业-航测/地形图航测', 0, 0.1, 1.1, '0', 517.00, '含空三10％，实际完成0.31');
INSERT INTO `cmc_settle_work` VALUES (2498, '1648881415047870282', '内业-航测/地形图航测', 0, 2.21, 1, '0', 3978.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2499, '1648881415047870344', '坐标转换及高程计算', 0, 1, 1, '0', 600.00, '由自然资源部第三大地测量队解算1985国家高程基准成果及1954北京坐标系成果所产的费用。');
INSERT INTO `cmc_settle_work` VALUES (2500, '1648881415047870344', '外业-地形图测绘/地形图外业实测', 0, 0.047, 1, '0', 799.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2501, '1648881415047870344', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.032, 1, '0', 244.80, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2502, '1648881415047870344', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.604, 1, '0', 1712.30, '测绘工程中心完成。取水口。');
INSERT INTO `cmc_settle_work` VALUES (2503, '1648881415047870344', '外业-航飞/无人机航飞(飞行项目）', 0, 6, 1, '0', 2400.00, '2人*3天。测区较分散。');
INSERT INTO `cmc_settle_work` VALUES (2504, '1648881415047870344', '外业-其他/进出场', 0, 8, 1, '0', 2400.00, '4人*2天');
INSERT INTO `cmc_settle_work` VALUES (2505, '1648881415047870234', '外业-航飞/无人机航飞(飞行项目）', 0, 8, 1, '1', 0.00, '委外飞行');
INSERT INTO `cmc_settle_work` VALUES (2506, '1648881415047870234', '外业-像控点、检查点采集', 0, 5, 1, '1', 0.00, '德方公司完成');
INSERT INTO `cmc_settle_work` VALUES (2507, '1648881415047870328', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 1, '0', 3960.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2508, '1648881415047870328', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 6, 1, '0', 2376.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2509, '1648881415047870328', '外业-高程测量/水准测量', 0, 21.405, 0.7, '0', 2697.00, '附合高程导线');
INSERT INTO `cmc_settle_work` VALUES (2510, '1648881415047870328', '外业-地形图测绘/地形图(激光)测绘', 0, 25.254, 1, '0', 15152.40, '总面积25.7');
INSERT INTO `cmc_settle_work` VALUES (2511, '1648881415047870328', '外业-地形图测绘/地形图外业实测', 0, 0.446, 1, '0', 1338.00, '外业修补测，按测点面积统计');
INSERT INTO `cmc_settle_work` VALUES (2512, '1648881415047870234', '外业-其他/配合测量', 0, 2, 1, '1', 0.00, '外业配合地质特征点采集测量，德方公司完成');
INSERT INTO `cmc_settle_work` VALUES (2513, '1648881415047870234', '内业-三维模型/实景三维模型制作', 0, 4.15, 1, '1', 5706.30, '由于飞行原因，工序复杂，且包含水面修饰，纹理修饰，桥梁修饰，故按复杂地类计算。');
INSERT INTO `cmc_settle_work` VALUES (2514, '1648881415047870447', '内业-航测/地形图航测', 0, 0.2, 1.1, '0', 1034.00, '含空三10%');
INSERT INTO `cmc_settle_work` VALUES (2515, '1648881415047870366', '淹没区1:5000地形地类图测绘（委外）', 0, 17.83, 1, '0', 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2516, '1648881415047870366', '内业-航测/地形图航测', 0, 17.83, 1.3, '0', 5099.40, '利用已有数据、外业调绘修补测后编绘成图，地形地类增加30％');
INSERT INTO `cmc_settle_work` VALUES (2517, '1648881415047870366', '外业-地形图测绘/地形图(无人机)测绘', 0, 17.83, 0.84, '0', 6065.80, '调绘补测检查点等工作');
INSERT INTO `cmc_settle_work` VALUES (2518, '1648881415047870366', '外业-其他/配合测量', 0, 6, 1.05, '0', 2268.00, '委外部分检查、调绘及修补测工作，张书伟、潘林海、周建伟3人、2天');
INSERT INTO `cmc_settle_work` VALUES (2519, '1648881415047870366', '外业-其他/进出场', 0, 5, 1, '0', 1500.00, '张书伟、潘林海、周建伟3人进场，潘林海、周建伟2人出场');
INSERT INTO `cmc_settle_work` VALUES (2520, '1648881415047870434', '外业-地形图测绘/地形图外业实测', 0, 23.58, 0.225, '0', 4775.00, '检查点、调绘补测，0.2*0.9，测区平均高程 3595，增加 25%；');
INSERT INTO `cmc_settle_work` VALUES (2521, '1648881415047870417', '内业-激光制图/激光数据制作地形图', 0, 2.53, 2, '0', 13915.00, '业主需要核实他自己已有地形图及界桩，用2000标准点云成了一遍图，后面又用500标准点云又成了一遍图。');
INSERT INTO `cmc_settle_work` VALUES (2522, '1648881415047870434', '平面控制测量', 0, 6, 0.625, '0', 712.50, '刻石标志按 50%计算，测区平均高程 3595，增加 25%；');
INSERT INTO `cmc_settle_work` VALUES (2523, '1648881415047870321', '外业-其他/配合测量', 0, 6, 1, '1', 2400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2524, '1648881415047870321', '项目管理费用', 0, 0.03, 1, '0', 900.00, '项目管理费用');
INSERT INTO `cmc_settle_work` VALUES (2525, '1648881415047870434', 'SHP格式成果', 0, 1, 1, '0', 210.00, '航测遥感中心完成，等高线转SHP文件');
INSERT INTO `cmc_settle_work` VALUES (2526, '1648881415047870434', '测绘局坐标转换', 0, 1, 1, '0', 400.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2527, '1648881415047870312', '外业-地形图测绘/地形图(无人机)测绘', 0, 4.32, 1, '1', 14774.40, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2528, '1648881415047870328', '外业-地形图测绘/地形图(激光)测绘', 0, 25.7, 0.3, '0', 4626.00, '地类图制作，按0.3计算');
INSERT INTO `cmc_settle_work` VALUES (2529, '1648881415047870328', '内业-激光制图/激光数据制作地形图', 0, 25.254, 1, '0', 15657.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (2530, '1648881415047870328', '内业-编图/地形图数字化', 0, 0.446, 0.6, '0', 62.90, '外业修补测地形图编辑');
INSERT INTO `cmc_settle_work` VALUES (2531, '1648881415047870328', '内业-激光制图/激光数据制作地形图', 0, 25.7, 0.3, '0', 4780.20, '地类图制作，按0.3计算');
INSERT INTO `cmc_settle_work` VALUES (2532, '1648881415047870241', '下水库地形图（1：1000）', 0, 2.23, 1, '0', 2631.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (2533, '1648881415047870241', '上水库地形图（1：1000）', 0, 1.69, 1, '0', 1994.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (2534, '1648881415047870241', '补测地形图（1：2000）', 0, 3.23, 1, '0', 2002.60, NULL);
INSERT INTO `cmc_settle_work` VALUES (2535, '1648881415047870241', '外业-其他/进出场', 0, 20, 1, NULL, 6600.00, '5个人，进出场4天。');
INSERT INTO `cmc_settle_work` VALUES (2536, '1648881415047870241', '隔离一天', 0, 5, 1, NULL, 1800.00, '5个人，隔离一天，请领导审核。');
INSERT INTO `cmc_settle_work` VALUES (2537, '1648881415047870241', '1:1000像控点、检查点、调绘', 0, 3.92, 0.2, '0', 4939.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (2538, '1648881415047870241', '1:2000像控点、检查点、调绘', 0, 3.23, 0.2, '0', 1938.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2539, '1648881415047870241', '激光技术中心委外飞行监管', 0, 3, 1, '0', 630.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2540, '1648881415047870241', '委外飞行', 0, NULL, 1, NULL, 0.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2541, '1648881415047870378', '内业-航测/地形图航测', 0, 0.83, 1.4, '0', 2091.60, '霞曲汇口0.53km²、卡许料场0.3km²；空三增加10％；地形地类图增加30％。');
INSERT INTO `cmc_settle_work` VALUES (2542, '1648881415047870378', '内业-航测/地形图航测', 0, 0.22, 1.1, '0', 1137.40, '空三增加10％');
INSERT INTO `cmc_settle_work` VALUES (2543, '1648881415047870378', '内业-航测/地形图航测', 0, 0.78, 1.1, '0', 1544.40, '空三增加10％');
INSERT INTO `cmc_settle_work` VALUES (2544, '1648881415047870378', '内业-航测/地形图航测', 0, 1.54, 1.1, '0', 1270.50, '空三增加10％');
INSERT INTO `cmc_settle_work` VALUES (2545, '1648881415047870378', '内业-激光制图/激光数据制作地形图', 0, 1.64, 1, '0', 1935.20, '崩布隆巴沟炸药库0.76km²、G349玉坝桥0.15km²、G349恩珠藏布桥0.34km²、G349霞曲桥0.39km²、利用上半年激光');
INSERT INTO `cmc_settle_work` VALUES (2546, '1648881415047870378', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.83, 1.625, '0', 3823.70, '地形地类图增加30％');
INSERT INTO `cmc_settle_work` VALUES (2547, '1648881415047870378', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.22, 1.25, '0', 2103.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (2548, '1648881415047870378', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.78, 1.25, '0', 2764.10, NULL);
INSERT INTO `cmc_settle_work` VALUES (2549, '1648881415047870378', '外业-地形图测绘/地形图(无人机)测绘', 0, 1.54, 1.25, '0', 2598.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (2550, '1648881415047870378', '外业-地形图测绘/地形图(激光)测绘', 0, 1.64, 1.125, '0', 2324.70, '作业队现场调绘及修补测，按0.9计算');
INSERT INTO `cmc_settle_work` VALUES (2551, '1648881415047870434', '外业-地形图测绘/地形图外业实测', 0, 5.91, 0.225, '0', 3989.30, '检查点、调绘补测，0.2*0.9，测区平均高程 3595，增加 25%；');
INSERT INTO `cmc_settle_work` VALUES (2552, '1648881415047870434', '外业-断面测量/断面测量', 0, 0.975, 1.25, '0', 853.10, '横断面，测区平均高程 3595，增加 25%；');
INSERT INTO `cmc_settle_work` VALUES (2553, '1648881415047870434', '外业-断面测量/断面测量', 0, 6.9, 0.75, '0', 1138.50, '水边线测量，按60%计算，测区平均高程 3595，增加 25%；');
INSERT INTO `cmc_settle_work` VALUES (2554, '1648881415047870434', '外业-断面测量/断面测量', 0, 8.22, 0.75, '0', 1171.40, '水边线测量，测区平均高程 3595，增加 25%；');
INSERT INTO `cmc_settle_work` VALUES (2555, '1648881415047870434', '外业-其他/进出场', 0, 16, 1, '0', 4800.00, '人员吴振、朱倪强、万龙卿、熊艳华，进场时间：2023.2.14-2.15，出场时间2023.2.21-2.22');
INSERT INTO `cmc_settle_work` VALUES (2556, '1648881415047870378', '内业-零星配合工作（转坐标）', 0, 8, 1, '0', 1680.00, '航测遥感中心转换2000坐标系');
INSERT INTO `cmc_settle_work` VALUES (2557, '1648881415047870312', '内业-航测/地形图航测', 0, 4.32, 1.1, '0', 8553.60, '航测遥感中心完成（含空三加密）');
INSERT INTO `cmc_settle_work` VALUES (2558, '1648881415047870312', '内业-三维模型/实景三维模型制作', 0, 4.32, 1, '0', 1555.20, '地理信息中心完成');
INSERT INTO `cmc_settle_work` VALUES (2559, '1648881415047870312', '内业-坐标转换/坐标系转换', 0, 16, 1, '0', 240.00, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (2560, '1648881415047870238', '内业-航测/地形图航测', 0, 0.087, 1.1, '0', 449.80, '空三 航测成图');
INSERT INTO `cmc_settle_work` VALUES (2561, '1648881415047870238', '内业-航测/地形图航测', 0, 0.72, 1.1, '0', 1425.60, '空三 航测成图');
INSERT INTO `cmc_settle_work` VALUES (2562, '1648881415047870238', '内业-航测/地形图航测', 0, 0.084, 1.1, '0', 434.30, '空三 航测成图');
INSERT INTO `cmc_settle_work` VALUES (2563, '1648881415047870238', '外业-航飞/无人机航飞(飞行项目）', 0, 2, 1, '0', 720.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2564, '1648881415047870238', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 26, 0.6, '0', 2964.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2565, '1648881415047870276', '内业-航测/地形图航测', 0, 0.64, 1, '1', 3520.00, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (2566, '1648881415047870276', '内业-地物采集', 0, 6.54, 0.5, '1', 2550.60, '航测遥感中心采集');
INSERT INTO `cmc_settle_work` VALUES (2567, '1648881415047870276', '内业-空三', 0, 0.64, 0.1, '1', 0.00, '激光技术中心空三');
INSERT INTO `cmc_settle_work` VALUES (2568, '1648881415047870276', '内业-空三', 0, 14.54, 0.1, '1', 3053.40, '激光技术中心空三');
INSERT INTO `cmc_settle_work` VALUES (2569, '1648881415047870276', '内业-航测/地形图航测', 0, 8.034, 1, '1', 16871.40, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (2570, '1648881415047870238', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 0.171, 0.45, '0', 523.30, '像控 调绘修补测 检查点');
INSERT INTO `cmc_settle_work` VALUES (2571, '1648881415047870238', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.72, 0.45, '0', 918.50, '像控 调绘修补测 检查点');
INSERT INTO `cmc_settle_work` VALUES (2572, '1648881415047870238', '外业-地形图测绘/地形图(无人机)测绘', 0, 1.45, 0.45, '0', 880.90, '像控 调绘修补测 检查点');
INSERT INTO `cmc_settle_work` VALUES (2573, '1648881415047870238', '进出场', 0, 12, 1, '0', 3600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2574, '1648881415047870238', '内业-航测/地形图航测', 0, 1.45, 1.1, '0', 1196.30, '空三 航测成图');
INSERT INTO `cmc_settle_work` VALUES (2575, '1648881415047870350', '外业-地形图测绘/地形图(无人机)测绘', 0, 3.1, 1, '0', 4185.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2576, '1648881415047870350', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.1, 1, '0', 765.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2577, '1648881415047870350', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 10, 1, '0', 1900.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2578, '1648881415047870350', '外业-航飞/无人机航飞(飞行项目）', 0, 4, 1, '0', 1600.00, '4处');
INSERT INTO `cmc_settle_work` VALUES (2579, '1648881415047870350', '外业-其他/进出场', 0, 8, 1, '0', 2400.00, '夏志军、张书伟、廖绍毅、周建伟4人');
INSERT INTO `cmc_settle_work` VALUES (2580, '1648881415047870411', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 36, 1.2, '0', 17280.00, '吴振、朱倪强、熊艳华2023.05.08-2023.05.19，高差600多');
INSERT INTO `cmc_settle_work` VALUES (2581, '1648881415047870411', '内业-激光数据预处理/激光数据预处理', 0, 63, 1, '0', 11340.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2582, '1648881415047870276', '内业-编图/地形图数字化', 0, 6.506, 0, '1', 0.00, '云南分公司完成');
INSERT INTO `cmc_settle_work` VALUES (2583, '1648881415047870276', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 6.506, 1, '1', 0.00, '云南分公司完成');
INSERT INTO `cmc_settle_work` VALUES (2584, '1648881415047870276', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.64, 1, '1', 5760.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2585, '1648881415047870276', '外业-地形图测绘/地形图(无人机)测绘', 0, 5.759, 1, '1', 19695.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (2586, '1648881415047870276', '外业-地形图测绘/地形图(无人机)测绘', 0, 2.275, 0, '1', 0.00, '外协完成');
INSERT INTO `cmc_settle_work` VALUES (2587, '1648881415047870276', '外业-地形图测绘/地形图(无人机)测绘', 0, 10.901, 0.2, '1', 7456.30, '像控点和检查点测量');
INSERT INTO `cmc_settle_work` VALUES (2588, '1648881415047870276', '内业-DOM/DOM制作', 0, 16.66, 1, '1', 5831.00, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (2589, '1648881415047870289', '外业-施控网土建/水准点选埋', 0, 21, 1, '1', 8400.00, '测区未施工');
INSERT INTO `cmc_settle_work` VALUES (2590, '1648881415047870289', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 18, 1.6, '0', 21024.00, '新建点');
INSERT INTO `cmc_settle_work` VALUES (2591, '1648881415047870289', '外业-GNSS、控制网测量/GNSS、边角网测量、利用旧点', 0, 3, 1.6, '0', 2102.40, '联测国家C级点，利用旧点');
INSERT INTO `cmc_settle_work` VALUES (2592, '1648881415047870289', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 3, 1.6, '0', 3168.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2593, '1648881415047870289', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 12, 1.6, '0', 9600.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2594, '1648881415047870289', '外业-高程测量/水准测量', 0, 147.17, 2, '0', 123622.80, NULL);
INSERT INTO `cmc_settle_work` VALUES (2595, '1648881415047870289', '外业-高程测量/水准测量', 0, 33.147, 2, '0', 13921.70, NULL);
INSERT INTO `cmc_settle_work` VALUES (2596, '1648881415047870289', '外业-高程测量/水准测量', 0, 3.389, 2, '0', 1220.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2597, '1648881415047870289', '外业-其他/进出场', 0, 18, 1, '1', 5940.00, '9人*2天');
INSERT INTO `cmc_settle_work` VALUES (2598, '1648881415047870289', '租车', 0, 16, 1, '1', 11200.00, '水准测量时，现场分两组进行外业测量。现场短租车辆。');
INSERT INTO `cmc_settle_work` VALUES (2599, '1648881415047870276', '倾斜数据采集', 0, NULL, 1, '0', 0.00, '外协');
INSERT INTO `cmc_settle_work` VALUES (2600, '1648881415047870276', '内业-三维模型/实景三维模型制作', 0, 15.18, 1, '1', 20872.50, '前期用下视和左视进行空三建模测图，后期五镜头空三建模生产三维模型。激光技术中心完成。');
INSERT INTO `cmc_settle_work` VALUES (2601, '1648881415047870430', '项目管理费', 0, 1, 1, NULL, 20000.00, '项目总外协费用超过百万，低于2%计算。');
INSERT INTO `cmc_settle_work` VALUES (2602, '1648881415047870430', '内业-其他/配合测量', 0, 45, 1, '0', 9450.00, '配合质检检查修改工作内业。');
INSERT INTO `cmc_settle_work` VALUES (2603, '1648881415047870391', '内业-激光数据预处理/激光数据预处理', 0, 2, 1, '1', 936.00, 'SLAM激光点云解算，参照激光数据预处理车载激光数据结算价格计算。');
INSERT INTO `cmc_settle_work` VALUES (2604, '1648881415047870391', '内业-三维模型制作', 0, 2, 1, '1', 3850.00, '使用3DsMAX进行道路建模，参照激光点云进行制作，工序复杂，参照1:200实景模型结算价格计算。');
INSERT INTO `cmc_settle_work` VALUES (2605, '1648881415047870391', '外业-其他/配合测量', 0, 68, 1, '1', 27200.00, '隔离费用，参照配合测量费用。2022.11.12 - 2022.11.28 合4人17天，共计68天。');
INSERT INTO `cmc_settle_work` VALUES (2606, '1648881415047870435', 'ABH项目地形图', 0, 10, 1, '0', 2100.00, '矢量化地形图,100幅数据转换处理，共计10人天');
INSERT INTO `cmc_settle_work` VALUES (2607, '1648881415047870391', '外业-道路扫描', 0, 16, 1, '0', 6400.00, '2022.11.8 - 2022.11.11 合4人4天，共计16天。');
INSERT INTO `cmc_settle_work` VALUES (2608, '1648881415047870372', '内业-激光数据预处理/激光数据预处理', 0, 8.1, 1, '0', 486.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2609, '1648881415047870372', '外业-其他/进出场', 0, 21, 1, '0', 6300.00, '先测图再调绘，两次进出场，21人天。');
INSERT INTO `cmc_settle_work` VALUES (2610, '1648881415047870372', '测绘局坐标转换', 0, 1, 1, NULL, 300.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2611, '1648881415047870372', '激光采集住宿', 0, 13, 1, '0', 1950.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2612, '1648881415047870404', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 15, 1.2, '0', 7200.00, '3人5天，共15人天。');
INSERT INTO `cmc_settle_work` VALUES (2613, '1648881415047870404', '内业-激光数据预处理/激光数据预处理', 0, 1, 1, '0', 600.00, '解算面积9.2km²，按最低标准结算');
INSERT INTO `cmc_settle_work` VALUES (2614, '1648881415047870336', '外业-地形图测绘/地形图(激光)测绘', 0, 10.8, 1.25, '0', 8100.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2615, '1648881415047870336', '内业-激光制图/激光数据制作地形图', 0, 10.8, 1, '0', 6696.00, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (2616, '1648881415047870336', '外业-地形图测绘/地形图(激光)测绘', 0, 7.8, 1.5, '0', 7020.00, '测绘工程中心完成。地形地类图，系数为1.2*1.25=1.5');
INSERT INTO `cmc_settle_work` VALUES (2617, '1648881415047870336', '内业-激光制图/激光数据制作地形图', 0, 7.8, 1.3, '0', 6286.80, '航测遥感中心完成。地形地类图，系数为1.3');
INSERT INTO `cmc_settle_work` VALUES (2618, '1648881415047870336', '外业-地形图测绘/地形图(激光)测绘', 0, 0.8, 0.25, '0', 120.00, '测绘工程中心完成。已有地形图外调权属核地类，改为地类图，0.2*1.25=0.25');
INSERT INTO `cmc_settle_work` VALUES (2619, '1648881415047870336', '内业-激光制图/激光数据制作地形图', 0, 0.8, 0.3, '0', 148.80, '航测遥感中心完成。已有地形图编辑为地类图，');
INSERT INTO `cmc_settle_work` VALUES (2620, '1648881415047870336', '内业-比例尺缩放/地形图比例尺缩放', 0, 0.32, 0.7, '0', 177.40, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (2621, '1648881415047870336', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 24, 1.5, '0', 14400.00, '激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (2622, '1648881415047870336', '内业-激光制图/激光数据制作地形图', 0, 3.6, 1.3, '0', 5522.40, '航测遥感中心完成。地形地类图，系数为1.3');
INSERT INTO `cmc_settle_work` VALUES (2623, '1648881415047870336', '内业-激光数据预处理/激光数据预处理', 0, 12.6, 1, '0', 1134.00, '激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (2624, '1648881415047870336', '内业-激光数据预处理/激光数据预处理', 0, 18.6, 1, '0', 1116.00, '激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (2625, '1648881415047870336', '激光技术中心现场采集住宿费', 0, 1, 1, '0', 1920.00, '激光技术中心');
INSERT INTO `cmc_settle_work` VALUES (2626, '1648881415047870336', '外业-其他/进出场', 0, 16, 1, '1', 5280.00, '8人*2次');
INSERT INTO `cmc_settle_work` VALUES (2627, '1648881415047870338', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 8, 1, '0', 1520.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2628, '1648881415047870338', '高程解算费用', 0, 1, 1, '0', 500.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2629, '1648881415047870338', '外业-地形图测绘/地形图(激光)测绘', 0, 22.53, 1, '0', 13518.00, '测绘工程中心完成。上、下库输水线路');
INSERT INTO `cmc_settle_work` VALUES (2630, '1648881415047870338', '内业-激光制图/激光数据制作地形图', 0, 22.53, 1, '0', 0.00, '云南子公司完成');
INSERT INTO `cmc_settle_work` VALUES (2631, '1648881415047870338', '外业-地形图测绘/地形图(航片、卫片)测绘', 0, 35.06, 1, '0', 12621.60, '测绘工程中心完成。工程区地形图测绘');
INSERT INTO `cmc_settle_work` VALUES (2632, '1648881415047870338', '内业-激光制图/激光数据制作地形图', 0, 35.06, 1, '0', 0.00, '云南子公司完成');
INSERT INTO `cmc_settle_work` VALUES (2633, '1648881415047870338', '内业-DEM、地形面/DEM、三维地形面制作', 0, 22.53, 1, '0', 0.00, '云南子公司完成');
INSERT INTO `cmc_settle_work` VALUES (2634, '1648881415047870338', '内业-DEM、地形面/DEM、三维地形面制作', 0, 35.06, 1, '0', 0.00, '云南子公司完成');
INSERT INTO `cmc_settle_work` VALUES (2635, '1648881415047870338', '外业-其他/进出场', 0, 14, 1, '0', 4200.00, '4人（杨为康、黄建春、刘轩庭、熊艳华）*2天 3人（赵洪、凌涛、雷佳川）*2天');
INSERT INTO `cmc_settle_work` VALUES (2636, '1648881415047870338', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 12, 1.6, '0', 7680.00, '激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (2637, '1648881415047870338', '内业-激光数据预处理/激光数据预处理', 0, 57.59, 1, '0', 3455.40, '激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (2638, '1648881415047870338', '内业-比例尺缩放/地形图比例尺缩放', 0, 22.53, 1, '0', 0.00, '云南子公司完成');
INSERT INTO `cmc_settle_work` VALUES (2639, '1648881415047870338', '外业-地形图测绘/地形图(激光)测绘', 0, 22.53, 0.2, '0', 2703.60, '地类图权属调查。赵洪、凌涛、雷佳川后期单独完成');
INSERT INTO `cmc_settle_work` VALUES (2640, '1648881415047870440', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 10, 1, '0', 5000.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2641, '1648881415047870440', '外业-高程测量/三角高程测量、单程双测', 0, 21.01, 1, '0', 3706.20, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2642, '1648881415047870440', '外业-地形图测绘/地形图(激光)测绘', 0, 20.54, 1, '0', 12324.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2643, '1648881415047870404', '内业-点云分类/激光点云分类', 0, 9.2, 1, '0', 1840.00, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2644, '1648881415047870404', '激光住宿', 0, 1, 1, NULL, 776.00, '按实际开销');
INSERT INTO `cmc_settle_work` VALUES (2645, '1648881415047870440', '外业-地形图测绘/地形图(激光)测绘', 0, 6.96, 1, '0', 1252.80, '测绘工程中心完成');
INSERT INTO `cmc_settle_work` VALUES (2646, '1648881415047870440', '内业-激光制图/激光数据制作地形图', 0, 6.96, 1, '0', 4315.20, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (2647, '1648881415047870440', '内业-DEM、地形面/DEM、三维地形面制作', 0, 20.54, 1, '0', 4108.00, '航测遥感中心完成。枢纽区。');
INSERT INTO `cmc_settle_work` VALUES (2648, '1648881415047870440', '内业-DEM、地形面/DEM、三维地形面制作', 0, 6.96, 1, '0', 487.20, '航测遥感中心完成。工程区。');
INSERT INTO `cmc_settle_work` VALUES (2649, '1648881415047870440', '外业-其他/进出场', 0, 8, 1, '0', 2400.00, '测绘工程中心');
INSERT INTO `cmc_settle_work` VALUES (2650, '1648881415047870440', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 36, 1.3, '0', 18720.00, '激光技术中心完成，因高差600m ，故采用1.3系数。');
INSERT INTO `cmc_settle_work` VALUES (2651, '1648881415047870440', '内业-激光数据预处理/激光数据预处理', 0, 27.5, 1, '0', 1650.00, '激光技术中心完成');
INSERT INTO `cmc_settle_work` VALUES (2652, '1648881415047870440', '激光技术中心住宿费用', 0, 1, 1, '0', 1800.00, '3人*12天的住宿费用');
INSERT INTO `cmc_settle_work` VALUES (2653, '1648881415047870385', '内业-航测/地形图航测', 0, 6.49, 1.1, '0', 5354.30, '航测遥感中心空三成图');
INSERT INTO `cmc_settle_work` VALUES (2654, '1648881415047870385', '外业-地形图测绘/地形图(无人机)测绘', 0, 6.2, 0.9, '0', 7533.00, '现场检查点、调绘及修补测工作');
INSERT INTO `cmc_settle_work` VALUES (2655, '1648881415047870385', '外业-地形图测绘/地形图(无人机)测绘', 0, 6.49, 1, '0', 8761.50, NULL);
INSERT INTO `cmc_settle_work` VALUES (2656, '1648881415047870385', '转场', 0, 8, 1, '0', 2640.00, '夏志军、黄安堂、黄建春、凌涛4人参与项目');
INSERT INTO `cmc_settle_work` VALUES (2657, '1648881415047870382', '内业-航测/地形图航测', 0, 0.39, 1, '0', 0.00, '牙根二级中坝址~楞古上坝址1:2000地形图测绘（岸上部分');
INSERT INTO `cmc_settle_work` VALUES (2658, '1648881415047870382', '内业-航测/地形图航测', 0, 0.22, 1, '0', 0.00, '力丘河汇口以上1:1000地形图测绘（岸上部分）');
INSERT INTO `cmc_settle_work` VALUES (2659, '1648881415047870440', '内业-激光制图/激光数据制作地形图', 0, 20.54, 1, '0', 12734.80, '航测遥感中心完成');
INSERT INTO `cmc_settle_work` VALUES (2660, '1648881415047870382', '内业-编图/地形图数字化', 0, 0.07, 1, '0', 0.00, '减水河段有跌水河段1:1000地形图测绘（岸上部分）');
INSERT INTO `cmc_settle_work` VALUES (2661, '1648881415047870382', '内业-坐标转换/坐标系转换', 0, 40, 1, '0', 600.00, 'CD186-YK-13-10(8)施工永久用地范围图坐标转换，92点；楞古施工总布置楞古的上、中坝址轴线坐标转换，82点');
INSERT INTO `cmc_settle_work` VALUES (2662, '1648881415047870382', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.39, 1.1, '0', 579.20, NULL);
INSERT INTO `cmc_settle_work` VALUES (2663, '1648881415047870385', '内业-航测/地形图航测', 0, 6.2, 1, '0', 0.00, '委托云南省遥感中心');
INSERT INTO `cmc_settle_work` VALUES (2664, '1648881415047870382', '外业-地形图测绘/地形图(无人机)测绘', 0, 0.22, 1.1, '0', 686.10, NULL);
INSERT INTO `cmc_settle_work` VALUES (2665, '1648881415047870382', '外业-地形图测绘/地形图外业实测', 0, 0.07, 1.1, '0', 485.10, NULL);
INSERT INTO `cmc_settle_work` VALUES (2666, '1648881415047870382', '外业-地形图测绘/地形图外业实测', 0, 0.44, 1.1, '0', 1452.00, '牙根二级中坝址~楞古上坝址1:2000地形图测绘（水下部分）');
INSERT INTO `cmc_settle_work` VALUES (2667, '1648881415047870382', '外业-地形图测绘/地形图外业实测', 0, 1.12, 1.1, '0', 7761.60, '力丘河汇口以上1:1000地形图测绘（水下部分）0.21，减水河段有跌水河段1:1000水下地形图测绘（水下部分）0.');
INSERT INTO `cmc_settle_work` VALUES (2668, '1648881415047870382', '外业-断面测量/断面测量', 0, 29, 1.1, '0', 2871.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2669, '1648881415047870382', '外业-断面测量/断面测量', 0, 9.67, 1.1, '0', 6063.10, '雅砻江河道1:1000大断面测量9.0km；力丘河汇口以上1:1000大断面测量0.56km');
INSERT INTO `cmc_settle_work` VALUES (2670, '1648881415047870382', '外业-航飞/无人机航飞(飞行项目）', 0, 6, 1.1, '0', 2640.00, '2人，力丘河河口1天、主河道2天（上游河段徒步前往测区）');
INSERT INTO `cmc_settle_work` VALUES (2671, '1648881415047870382', '外业-其他/进出场', 0, 8, 1, '1', 2640.00, '夏志军、蒋剑虹、张波、周建伟（替换张波）4人');
INSERT INTO `cmc_settle_work` VALUES (2672, '1648881415047870419', '外业-激光数据采集/外业激光数据采集(AS-1300HL)', 0, 12, 1, '0', 4800.00, '影像采集，带状、天气不好、搬运设备等，2人飞行6天，累计12人天');
INSERT INTO `cmc_settle_work` VALUES (2673, '1648881415047870419', '内业-航测/地形图航测', 0, 0.019, 1, '0', 89.30, NULL);
INSERT INTO `cmc_settle_work` VALUES (2674, '1648881415047870419', '内业-航测/地形图航测', 0, 1.978, 1, '0', 3560.40, NULL);
INSERT INTO `cmc_settle_work` VALUES (2675, '1648881415047870419', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 6, 1.05, '0', 3150.00, NULL);
INSERT INTO `cmc_settle_work` VALUES (2676, '1648881415047870419', '外业-GNSS、控制网测量/GNSS、边角网测量', 0, 2, 0.6, '0', 600.00, '引测控制点按60%计。');
INSERT INTO `cmc_settle_work` VALUES (2677, '1648881415047870419', '外业-高程测量/水准测量', 0, 18.03, 0.735, '0', 2385.40, NULL);

-- ----------------------------
-- 64、cmc结算汇总表
-- ----------------------------
drop table if exists `cmc_settle_summary`;
create table `cmc_settle_summary`  (
  `summary_id`		bigint not null  auto_increment comment '结算汇总id',
  `settle_id`		char(19)		default null	comment '结算id',
  `content`			varchar(255)	default null	comment '结算内容',
  `amount`			decimal(10,2)	default null	comment '结算金额',
  `remark`			varchar(255)	default null	comment '备注',
  `table_number`	char(1)			default null	comment '表格编号',
  primary key (`summary_id`)
) engine = innodb comment = 'cmc结算汇总表';

-- ----------------------------
-- 初始化-结算汇总表数据
-- ----------------------------
INSERT INTO `cmc_settle_summary` VALUES (1, '1648881415047870021', '测绘工程中心', 7882.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2, '1648881415047870050', '外业结算金额', 30877.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (3, '1648881415047870050', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (4, '1648881415047870050', '实际结算总金额', 30877.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (5, '1648881415047870050', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (6, '1648881415047870064', '结算费用合计', 49729.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (7, '1648881415047870064', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (8, '1648881415047870036', '结算费用合计', 25200.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (9, '1648881415047870036', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (10, '1648881415047870036', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (11, '1648881415047870036', '外业结算金额', 25200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (12, '1648881415047870036', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (13, '1648881415047870036', '实际结算总金额', 25200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (14, '1648881415047870037', '结算费用合计', 44280.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (15, '1648881415047870037', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (16, '1648881415047870037', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (17, '1648881415047870037', '外业结算金额', 44280.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (18, '1648881415047870037', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (19, '1648881415047870037', '实际结算总金额', 44280.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (20, '1648881415047870021', '实际结算总金额', 12005.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (21, '1648881415047870029', '结算费用合计', 8884.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (22, '1648881415047870029', '双江口测量中心质保金', 888.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (23, '1648881415047870029', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (24, '1648881415047870029', '双江口测量中心', 8805.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (25, '1648881415047870029', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (26, '1648881415047870074', '结算费用合计', 3407.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (27, '1648881415047870074', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (28, '1648881415047870074', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (29, '1648881415047870074', '测绘工程中心', 2820.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (30, '1648881415047870074', '航测遥感中心', 588.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (31, '1648881415047870074', '实际结算总金额', 3408.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (32, '1648881415047870029', '实际结算总金额', 7997.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (33, '1648881415047870111', '结算费用合计', 2975.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (34, '1648881415047870111', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (35, '1648881415047870111', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (36, '1648881415047870111', '测绘工程中心', 2812.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (37, '1648881415047870111', '航测遥感中心', 163.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (38, '1648881415047870111', '实际结算总金额', 2975.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (39, '1648881415047870075', '结算费用合计', 12045.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (40, '1648881415047870075', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (41, '1648881415047870075', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (42, '1648881415047870075', '测绘工程中心', 11520.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (43, '1648881415047870075', '航测遥感中心', 525.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (44, '1648881415047870064', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (45, '1648881415047870064', '外业结算金额', 49730.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (46, '1648881415047870064', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (47, '1648881415047870064', '实际结算总金额', 49730.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (48, '1648881415047870079', '结算费用合计', 37369.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (49, '1648881415047870079', '外业质保金', 1500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (50, '1648881415047870079', '内业质保金', 854.00, '含GIS中心质保金126元', '0');
INSERT INTO `cmc_settle_summary` VALUES (51, '1648881415047870079', '外业结算金额', 27333.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (52, '1648881415047870079', '内业结算金额', 7683.00, '含GIS中心1134元', '1');
INSERT INTO `cmc_settle_summary` VALUES (53, '1648881415047870079', '实际结算总金额', 35016.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (54, '1648881415047870005', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (55, '1648881415047870005', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (56, '1648881415047870005', '测绘工程中心（外业）', 1080.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (57, '1648881415047870005', '航测遥感中心（内业）', 600.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (58, '1648881415047870034', '实际结算总金额', 32640.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (59, '1648881415047870008', '结算费用合计', 1440.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (60, '1648881415047870008', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (61, '1648881415047870008', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (62, '1648881415047870008', '测绘工程中心', 1440.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (63, '1648881415047870008', '实际结算总金额', 1440.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (64, '1648881415047870077', '结算费用合计', 4880.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (65, '1648881415047870077', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (66, '1648881415047870077', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (67, '1648881415047870077', '两河口测量中心', 4880.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (68, '1648881415047870077', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (69, '1648881415047870077', '实际结算总金额', 4880.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (70, '1648881415047870055', '结算费用合计', 4800.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (71, '1648881415047870055', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (72, '1648881415047870055', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (73, '1648881415047870055', '工程监测中心', 4800.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (74, '1648881415047870055', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (75, '1648881415047870055', '实际结算总金额', 4800.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (76, '1648881415047870052', '结算费用合计', 921.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (77, '1648881415047870052', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (78, '1648881415047870052', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (79, '1648881415047870052', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (80, '1648881415047870052', '航测遥感中心', 921.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (81, '1648881415047870052', '实际结算总金额', 921.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (82, '1648881415047870003', '结算费用合计', 220.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (83, '1648881415047870003', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (84, '1648881415047870003', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (85, '1648881415047870003', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (86, '1648881415047870003', '航测遥感中心', 220.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (87, '1648881415047870003', '实际结算总金额', 220.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (88, '1648881415047870062', '结算费用合计', 5464.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (89, '1648881415047870062', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (90, '1648881415047870062', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (91, '1648881415047870062', '双江口测量中心', 4874.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (92, '1648881415047870062', '航测遥感中心', 590.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (93, '1648881415047870062', '实际结算总金额', 5464.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (94, '1648881415047870051', '结算费用合计', 2720.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (95, '1648881415047870051', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (96, '1648881415047870051', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (97, '1648881415047870051', '工程监测中心', 2720.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (98, '1648881415047870051', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (99, '1648881415047870051', '实际结算总金额', 2720.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (100, '1648881415047870110', '项目委外金额', 5850.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (101, '1648881415047870110', '汽车台班费', 540.00, '现场用车3天。', '0');
INSERT INTO `cmc_settle_summary` VALUES (102, '1648881415047870110', '外业质保金', 1066.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (103, '1648881415047870110', '内业质保金', 511.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (104, '1648881415047870110', '外业结算金额', 12099.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (105, '1648881415047870030', '结算费用合计', 820.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (106, '1648881415047870030', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (107, '1648881415047870043', '结算费用合计', 20698.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (108, '1648881415047870043', '外业质保金', 1000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (109, '1648881415047870043', '内业质保金', 546.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (110, '1648881415047870043', '外业结算金额', 13939.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (111, '1648881415047870043', '内业结算金额', 5214.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (112, '1648881415047870043', '实际结算总金额', 19400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (113, '1648881415047870045', '外业质保金', 1129.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (114, '1648881415047870045', '汽车台班费', 900.00, '现场用车7天，2天误工，按5天计', '0');
INSERT INTO `cmc_settle_summary` VALUES (115, '1648881415047870045', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (116, '1648881415047870045', '外业结算金额', 16165.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (117, '1648881415047870045', '内业结算金额', 2234.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (118, '1648881415047870045', '实际结算总金额', 18399.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (119, '1648881415047870057', '结算费用合计', 59210.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (120, '1648881415047870110', '结算费用合计', 24661.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (121, '1648881415047870110', '内业结算金额', 4595.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (122, '1648881415047870110', '实际结算总金额', 16694.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (123, '1648881415047870045', '结算费用合计', 20428.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (124, '1648881415047870057', '项目委外金额', 13110.00, '空三、测图，合同支付', '1');
INSERT INTO `cmc_settle_summary` VALUES (125, '1648881415047870057', '汽车台班费', 2700.00, '现场用车15天', '0');
INSERT INTO `cmc_settle_summary` VALUES (126, '1648881415047870114', '结算费用合计', 207.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (127, '1648881415047870114', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (128, '1648881415047870114', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (129, '1648881415047870114', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (130, '1648881415047870114', '内业结算金额', 208.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (131, '1648881415047870114', '实际结算总金额', 208.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (132, '1648881415047870035', '结算费用合计', 19295.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (133, '1648881415047870005', '实际结算总金额', 1680.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (134, '1648881415047870006', '结算费用合计', 1040.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (135, '1648881415047870006', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (136, '1648881415047870006', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (137, '1648881415047870006', '测绘工程中心（外业）', 800.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (138, '1648881415047870006', '测绘工程中心（内业）', 240.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (139, '1648881415047870006', '实际结算总金额', 1040.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (140, '1648881415047870007', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (141, '1648881415047870007', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (142, '1648881415047870007', '测绘工程中心', 2400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (143, '1648881415047870007', '航测遥感中心', 300.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (144, '1648881415047870007', '实际结算总金额', 2700.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (145, '1648881415047870044', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (146, '1648881415047870044', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (147, '1648881415047870044', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (148, '1648881415047870044', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (149, '1648881415047870044', '实际结算总金额', 16354.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (150, '1648881415047870019', '结算费用合计', 12960.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (151, '1648881415047870028', '结算费用合计', 240.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (152, '1648881415047870028', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (153, '1648881415047870028', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (154, '1648881415047870028', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (155, '1648881415047870028', '内业结算金额', 240.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (156, '1648881415047870028', '实际结算总金额', 240.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (157, '1648881415047870078', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (158, '1648881415047870078', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (159, '1648881415047870078', '外业结算金额', 3339.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (160, '1648881415047870078', '内业结算金额', 1368.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (161, '1648881415047870078', '实际结算总金额', 4707.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (162, '1648881415047870019', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (163, '1648881415047870078', '结算费用合计', 4706.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (164, '1648881415047870019', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (165, '1648881415047870019', '测绘工程中心', 12960.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (166, '1648881415047870019', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (167, '1648881415047870019', '实际结算总金额', 12960.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (168, '1648881415047870005', '结算费用合计', 1680.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (169, '1648881415047870044', '结算费用合计', 16354.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (170, '1648881415047870007', '结算费用合计', 2700.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (171, '1648881415047870054', '项目委外金额', 31360.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (172, '1648881415047870054', '外业质保金', 15700.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (173, '1648881415047870054', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (174, '1648881415047870054', '外业结算金额', 147635.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (175, '1648881415047870054', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (176, '1648881415047870054', '实际结算总金额', 147635.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (177, '1648881415047870054', '结算费用合计', 194695.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (178, '1648881415047870112', '结算费用合计', 671.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (179, '1648881415047870056', '结算费用合计', 31770.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (180, '1648881415047870056', '外业质保金', 2022.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (181, '1648881415047870056', '内业质保金', 1155.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (182, '1648881415047870056', '汽车台班费', 1800.00, '用车10天', '0');
INSERT INTO `cmc_settle_summary` VALUES (183, '1648881415047870056', '外业结算金额', 15243.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (184, '1648881415047870056', '内业结算金额', 11550.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (185, '1648881415047870056', '实际结算总金额', 26793.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (186, '1648881415047870034', '结算费用合计', 38667.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (187, '1648881415047870034', '测绘工程中心质保金', 2442.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (188, '1648881415047870034', '航测遥感中心质保金', 1425.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (189, '1648881415047870034', '汽车台班费', 2160.00, '与2019C19项目，共计用车12天。', '0');
INSERT INTO `cmc_settle_summary` VALUES (190, '1648881415047870034', '测绘工程中心', 19819.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (191, '1648881415047870034', '航测遥感中心', 12821.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (192, '1648881415047870017', '结算费用合计', 234827.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (193, '1648881415047870017', '工程监测中心质保金', 23603.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (194, '1648881415047870017', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (195, '1648881415047870017', '工程监测中心', 211224.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (196, '1648881415047870017', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (197, '1648881415047870017', '实际结算总金额', 211224.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (198, '1648881415047870112', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (199, '1648881415047870112', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (200, '1648881415047870112', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (201, '1648881415047870112', '航测遥感中心', 671.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (202, '1648881415047870112', '实际结算总金额', 671.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (203, '1648881415047870113', '结算费用合计', 14830.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (204, '1648881415047870113', '测绘工程中心质保金', 1395.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (205, '1648881415047870113', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (206, '1648881415047870113', '测绘工程中心', 12558.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (207, '1648881415047870113', '航测遥感中心', 878.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (208, '1648881415047870113', '实际结算总金额', 13436.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (209, '1648881415047870076', '测绘工程中心质保金', 35800.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (210, '1648881415047870076', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (211, '1648881415047870076', '测绘工程中心', 322200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (212, '1648881415047870076', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (213, '1648881415047870076', '实际结算总金额', 322200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (214, '1648881415047870076', '结算费用合计', 358000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (215, '1648881415047870035', '外业质保金', 980.00, '结算费用的10% 单位：元', '0');
INSERT INTO `cmc_settle_summary` VALUES (216, '1648881415047870057', '外业质保金', 1987.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (217, '1648881415047870030', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (218, '1648881415047870030', '测绘工程中心', 720.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (219, '1648881415047870030', '航测遥感中心', 100.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (220, '1648881415047870030', '实际结算总金额', 820.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (221, '1648881415047870061', '结算费用合计', 121655.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (222, '1648881415047870061', '项目委外金额', 100000.00, '合同支付', '1');
INSERT INTO `cmc_settle_summary` VALUES (223, '1648881415047870061', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (224, '1648881415047870061', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (225, '1648881415047870061', '外业结算金额', 18576.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (226, '1648881415047870061', '内业结算金额', 3080.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (227, '1648881415047870061', '实际结算总金额', 21656.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (228, '1648881415047870001', '结算费用合计', 100613.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (229, '1648881415047870001', '测绘工程中心质保金', 10000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (230, '1648881415047870001', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (231, '1648881415047870001', '测绘工程中心', 90613.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (232, '1648881415047870001', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (233, '1648881415047870001', '实际结算总金额', 90613.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (234, '1648881415047870057', '内业质保金', 259.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (235, '1648881415047870057', '外业结算金额', 38818.00, '含委外飞行支付费用', '1');
INSERT INTO `cmc_settle_summary` VALUES (236, '1648881415047870057', '内业结算金额', 2336.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (237, '1648881415047870057', '实际结算总金额', 41154.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (238, '1648881415047870024', '结算费用合计', 300.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (239, '1648881415047870024', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (240, '1648881415047870024', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (241, '1648881415047870024', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (242, '1648881415047870024', '航测遥感中心', 300.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (243, '1648881415047870024', '实际结算总金额', 300.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (244, '1648881415047870063', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (245, '1648881415047870063', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (246, '1648881415047870063', '外业结算金额', 307170.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (247, '1648881415047870063', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (248, '1648881415047870063', '实际结算总金额', 307170.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (249, '1648881415047870048', '项目委外金额', 1500.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (250, '1648881415047870048', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (251, '1648881415047870048', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (252, '1648881415047870048', '外业结算金额', 4298.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (253, '1648881415047870025', '结算费用合计', 2412.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (254, '1648881415047870025', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (255, '1648881415047870025', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (256, '1648881415047870058', '结算费用合计', 196464.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (257, '1648881415047870058', '外业质保金', 13153.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (258, '1648881415047870058', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (259, '1648881415047870058', '外业结算金额', 183311.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (260, '1648881415047870058', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (261, '1648881415047870058', '实际结算总金额', 183311.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (262, '1648881415047870020', '结算费用合计', 51800.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (263, '1648881415047870020', '外业质保金', 5180.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (264, '1648881415047870020', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (265, '1648881415047870020', '外业结算金额', 46620.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (266, '1648881415047870020', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (267, '1648881415047870020', '实际结算总金额', 46620.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (268, '1648881415047870022', '外业质保金', 102580.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (269, '1648881415047870022', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (270, '1648881415047870022', '外业结算金额', 923220.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (271, '1648881415047870022', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (272, '1648881415047870022', '实际结算总金额', 923220.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (273, '1648881415047870022', '结算费用合计', 1025800.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (274, '1648881415047870059', '结算费用合计', 3150.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (275, '1648881415047870059', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (276, '1648881415047870059', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (277, '1648881415047870059', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (278, '1648881415047870059', '内业结算金额', 3150.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (279, '1648881415047870059', '实际结算总金额', 3150.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (280, '1648881415047870060', '结算费用合计', 11880.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (281, '1648881415047870060', '外业质保金', 1170.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (282, '1648881415047870060', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (283, '1648881415047870060', '外业结算金额', 10530.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (284, '1648881415047870060', '内业结算金额', 181.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (285, '1648881415047870063', '结算费用合计', 307170.00, '按变更合同额30%', '2');
INSERT INTO `cmc_settle_summary` VALUES (286, '1648881415047870060', '实际结算总金额', 10711.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (287, '1648881415047870027', '结算费用合计', 36256.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (288, '1648881415047870027', '项目委外金额', 31526.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (289, '1648881415047870027', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (290, '1648881415047870027', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (291, '1648881415047870027', '测绘工程中心', 2000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (292, '1648881415047870027', '航测遥感中心', 2730.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (293, '1648881415047870027', '实际结算总金额', 4730.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (294, '1648881415047870065', '结算费用合计', 564.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (295, '1648881415047870065', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (296, '1648881415047870065', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (297, '1648881415047870065', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (298, '1648881415047870065', '航测遥感中心', 565.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (299, '1648881415047870065', '实际结算总金额', 565.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (300, '1648881415047870031', '结算费用合计', 418400.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (301, '1648881415047870031', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (302, '1648881415047870031', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (303, '1648881415047870031', '外业结算金额', 418400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (304, '1648881415047870031', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (305, '1648881415047870031', '实际结算总金额', 418400.00, '按公司收款进度支付结算', '1');
INSERT INTO `cmc_settle_summary` VALUES (306, '1648881415047870032', '结算费用合计', 115800.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (307, '1648881415047870032', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (308, '1648881415047870032', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (309, '1648881415047870032', '外业结算金额', 115800.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (310, '1648881415047870032', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (311, '1648881415047870032', '实际结算总金额', 115800.00, '按公司收款进度支付结算', '1');
INSERT INTO `cmc_settle_summary` VALUES (312, '1648881415047870015', '结算费用合计', 107805.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (313, '1648881415047870015', '项目委外金额', 41100.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (314, '1648881415047870015', '外业质保金', 4730.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (315, '1648881415047870015', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (316, '1648881415047870015', '外业结算金额', 61975.00, '含支付委外调绘费用', '1');
INSERT INTO `cmc_settle_summary` VALUES (317, '1648881415047870015', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (318, '1648881415047870015', '实际结算总金额', 61975.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (319, '1648881415047870002', '结算费用合计', 135405.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (320, '1648881415047870002', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (321, '1648881415047870002', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (322, '1648881415047870002', '外业结算金额', 135405.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (323, '1648881415047870002', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (324, '1648881415047870002', '实际结算总金额', 135405.00, '按公司收款进度支付结算', '1');
INSERT INTO `cmc_settle_summary` VALUES (325, '1648881415047870012', '结算费用合计', 71095.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (326, '1648881415047870012', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (327, '1648881415047870012', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (328, '1648881415047870012', '外业结算金额', 71095.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (329, '1648881415047870012', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (330, '1648881415047870012', '实际结算总金额', 71095.00, '按公司收款进度支付结算', '1');
INSERT INTO `cmc_settle_summary` VALUES (331, '1648881415047870103', '结算费用合计', 99985.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (332, '1648881415047870103', '外业质保金', 6109.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (333, '1648881415047870103', '内业质保金', 3889.00, '含GIS中心质保金1316元', '0');
INSERT INTO `cmc_settle_summary` VALUES (334, '1648881415047870103', '外业结算金额', 54985.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (335, '1648881415047870103', '内业结算金额', 35002.00, '含GIS中心11848元', '1');
INSERT INTO `cmc_settle_summary` VALUES (336, '1648881415047870103', '实际结算总金额', 89987.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (337, '1648881415047870013', '结算费用合计', 78000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (338, '1648881415047870013', '外业质保金', 7800.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (339, '1648881415047870013', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (340, '1648881415047870013', '外业结算金额', 70200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (341, '1648881415047870013', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (342, '1648881415047870013', '实际结算总金额', 70200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (343, '1648881415047870011', '外业质保金', 2424.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (344, '1648881415047870011', '内业质保金', 1194.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (345, '1648881415047870011', '外业结算金额', 23311.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (346, '1648881415047870011', '内业结算金额', 10744.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (347, '1648881415047870011', '实际结算总金额', 34055.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (348, '1648881415047870047', '结算费用合计', 1329653.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (349, '1648881415047870047', '外业质保金', 132965.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (350, '1648881415047870047', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (351, '1648881415047870047', '外业结算金额', 1196688.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (352, '1648881415047870047', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (353, '1648881415047870047', '实际结算总金额', 1196688.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (354, '1648881415047870004', '结算费用合计', 840.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (355, '1648881415047870004', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (356, '1648881415047870004', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (357, '1648881415047870004', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (358, '1648881415047870004', '内业结算金额', 840.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (359, '1648881415047870004', '实际结算总金额', 840.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (360, '1648881415047870049', '结算费用合计', 480.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (361, '1648881415047870011', '结算费用合计', 37673.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (362, '1648881415047870049', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (363, '1648881415047870049', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (364, '1648881415047870049', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (365, '1648881415047870049', '内业结算金额', 480.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (366, '1648881415047870049', '实际结算总金额', 480.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (367, '1648881415047870050', '结算费用合计', 30877.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (368, '1648881415047870050', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (369, '1648881415047870025', '外业结算金额', 2412.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (370, '1648881415047870021', '结算费用合计', 13684.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (371, '1648881415047870021', '测绘工程中心质保金', 1215.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (372, '1648881415047870021', '航测遥感中心质保金', 465.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (373, '1648881415047870099', '结算费用合计', 436870.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (374, '1648881415047870099', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (375, '1648881415047870099', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (376, '1648881415047870099', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (377, '1648881415047870099', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (378, '1648881415047870099', '实际结算总金额', 436870.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (379, '1648881415047870158', '台班费', 13500.00, '使用公司汽车75天', '0');
INSERT INTO `cmc_settle_summary` VALUES (380, '1648881415047870158', '测绘工程中心质保金', 23723.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (381, '1648881415047870081', '结算费用合计', 20593.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (382, '1648881415047870081', '外业质保金', 2059.00, '结算费用的10% 单位：元', '0');
INSERT INTO `cmc_settle_summary` VALUES (383, '1648881415047870081', '外业结算金额', 18534.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (384, '1648881415047870081', '实际结算总金额', 18534.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (385, '1648881415047870089', '外业质保金', 648.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (386, '1648881415047870158', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (387, '1648881415047870089', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (388, '1648881415047870089', '外业结算金额', 5829.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (389, '1648881415047870089', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (390, '1648881415047870089', '实际结算总金额', 5829.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (391, '1648881415047870158', '地理信息中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (392, '1648881415047870105', '结算费用合计', 6600.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (393, '1648881415047870088', '外业质保金', 1000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (394, '1648881415047870041', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (395, '1648881415047870041', '实际结算总金额', 11522.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (396, '1648881415047870041', '结算费用合计', 11522.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (397, '1648881415047870025', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (398, '1648881415047870025', '实际结算总金额', 2412.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (399, '1648881415047870129', '外业结算金额', 4811.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (400, '1648881415047870033', '结算费用合计', 11148.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (401, '1648881415047870033', '测绘工程中心质保金', 1115.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (402, '1648881415047870033', '汽车台班费', 360.00, '现场用车2天。', '0');
INSERT INTO `cmc_settle_summary` VALUES (403, '1648881415047870033', '测绘工程中心（外业）', 9673.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (404, '1648881415047870033', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (405, '1648881415047870033', '实际结算总金额', 9673.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (406, '1648881415047870071', '结算费用合计', 3840.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (407, '1648881415047870071', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (408, '1648881415047870071', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (409, '1648881415047870071', '外业结算金额', 3840.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (410, '1648881415047870071', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (411, '1648881415047870071', '实际结算总金额', 3840.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (412, '1648881415047870046', '项目委外金额', 8900.00, '合同支付', '1');
INSERT INTO `cmc_settle_summary` VALUES (413, '1648881415047870046', '汽车台班费', 900.00, '现场用车5天', '0');
INSERT INTO `cmc_settle_summary` VALUES (414, '1648881415047870046', '外业质保金', 1443.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (415, '1648881415047870046', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (416, '1648881415047870046', '外业结算金额', 13974.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (417, '1648881415047870046', '内业结算金额', 1260.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (418, '1648881415047870170', '结算费用合计', 8459.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (419, '1648881415047870048', '内业结算金额', 420.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (420, '1648881415047870048', '结算费用合计', 6217.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (421, '1648881415047870048', '实际结算总金额', 4718.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (422, '1648881415047870009', '结算费用合计', 15800.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (423, '1648881415047870009', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (424, '1648881415047870009', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (425, '1648881415047870009', '测绘工程中心（外业）', 6080.00, '两河口测量中心800元', '1');
INSERT INTO `cmc_settle_summary` VALUES (426, '1648881415047870009', '测绘工程中心（内业）', 9720.00, '航测遥感中心3780元', '1');
INSERT INTO `cmc_settle_summary` VALUES (427, '1648881415047870009', '实际结算总金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (428, '1648881415047870026', '结算费用合计', 7508.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (429, '1648881415047870026', '工程监测中心质保金', 698.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (430, '1648881415047870026', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (431, '1648881415047870026', '汽车台班费', 540.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (432, '1648881415047870026', '工程监测中心', 5742.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (433, '1648881415047870026', '航测遥感中心', 529.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (434, '1648881415047870018', '结算费用合计', 24000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (435, '1648881415047870018', '测绘工程中心质保金', 2400.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (436, '1648881415047870018', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (437, '1648881415047870018', '测绘工程中心', 21600.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (438, '1648881415047870018', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (439, '1648881415047870018', '实际结算总金额', 21600.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (440, '1648881415047870026', '实际结算总金额', 6271.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (441, '1648881415047870014', '结算费用合计', 42420.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (442, '1648881415047870014', '项目委外金额', 39750.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (443, '1648881415047870014', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (444, '1648881415047870014', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (445, '1648881415047870014', '航测遥感中心（内业）', 1470.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (446, '1648881415047870046', '结算费用合计', 26297.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (447, '1648881415047870046', '实际结算总金额', 15054.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (448, '1648881415047870014', '测绘工程中心（外业）', 1200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (449, '1648881415047870014', '实际结算总金额', 2670.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (450, '1648881415047870170', '汽车台班费', 360.00, '现场用车川A9802U，合计2天 ', '0');
INSERT INTO `cmc_settle_summary` VALUES (451, '1648881415047870170', '外业质保金', 740.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (452, '1648881415047870170', '内业结算金额', 1005.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (453, '1648881415047870170', '外业结算金额', 7453.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (454, '1648881415047870170', '实际结算总金额', 7359.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (455, '1648881415047870109', '结算费用合计', 121385.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (456, '1648881415047870109', '外业质保金', 4450.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (457, '1648881415047870109', '内业质保金', 675.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (458, '1648881415047870109', '外业结算金额', 97990.00, '含卫片购买费43000', '1');
INSERT INTO `cmc_settle_summary` VALUES (459, '1648881415047870109', '内业结算金额', 6070.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (460, '1648881415047870109', '项目委外金额', 12200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (461, '1648881415047870109', '实际结算总金额', 116260.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (462, '1648881415047870080', '结算费用合计', 8469.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (463, '1648881415047870080', '外业质保金', 847.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (464, '1648881415047870080', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (465, '1648881415047870080', '外业结算金额', 7622.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (466, '1648881415047870080', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (467, '1648881415047870080', '实际结算总金额', 7622.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (468, '1648881415047870038', '汽车台班费', 1800.00, '安全培训期间不计台班费', '0');
INSERT INTO `cmc_settle_summary` VALUES (469, '1648881415047870038', '外业质保金', 5000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (470, '1648881415047870038', '外业结算金额', 45000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (471, '1648881415047870038', '实际结算总金额', 45000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (472, '1648881415047870108', '外业质保金', 600.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (473, '1648881415047870040', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (474, '1648881415047870040', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (475, '1648881415047870040', '外业结算金额', 23510.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (476, '1648881415047870040', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (477, '1648881415047870040', '实际结算总金额', 23510.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (478, '1648881415047870132', '实际结算总金额', 18360.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (479, '1648881415047870123', '结算费用合计', 1080.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (480, '1648881415047870123', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (481, '1648881415047870123', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (482, '1648881415047870123', '外业结算金额', 1080.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (483, '1648881415047870108', '内业质保金', 160.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (484, '1648881415047870108', '汽车台班费', 360.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (485, '1648881415047870108', '外业结算金额', 5811.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (486, '1648881415047870108', '内业结算金额', 1449.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (487, '1648881415047870108', '实际结算总金额', 7260.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (488, '1648881415047870108', '结算费用合计', 8380.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (489, '1648881415047870073', '结算费用合计', 10000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (490, '1648881415047870040', '结算费用合计', 23510.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (491, '1648881415047870073', '项目委外金额', 7500.00, '合同支付', '1');
INSERT INTO `cmc_settle_summary` VALUES (492, '1648881415047870067', '结算费用合计', 84514.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (493, '1648881415047870067', '外业质保金', 6576.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (494, '1648881415047870067', '内业质保金', 1035.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (495, '1648881415047870067', '汽车台班费', 3780.00, '现场用车21天', '0');
INSERT INTO `cmc_settle_summary` VALUES (496, '1648881415047870067', '外业结算金额', 63808.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (497, '1648881415047870067', '内业结算金额', 9316.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (498, '1648881415047870067', '实际结算总金额', 73124.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (499, '1648881415047870073', '外业结算金额', 2500.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (500, '1648881415047870073', '实际结算总金额', 2500.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (501, '1648881415047870123', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (502, '1648881415047870084', '结算费用合计', 185417.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (503, '1648881415047870084', '外业质保金', 10000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (504, '1648881415047870084', '内业质保金', 5829.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (505, '1648881415047870084', '外业结算金额', 117120.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (506, '1648881415047870084', '内业结算金额', 52468.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (507, '1648881415047870084', '实际结算总金额', 169589.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (508, '1648881415047870132', '内业结算金额', 20400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (509, '1648881415047870123', '实际结算总金额', 1080.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (510, '1648881415047870101', '结算费用合计', 480000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (511, '1648881415047870101', '减扣预发绩效', 70000.00, '向艳雄（2019年1-12月）', '1');
INSERT INTO `cmc_settle_summary` VALUES (512, '1648881415047870101', '减扣预发绩效', 53000.00, '王国文（2019年1-12月）', '1');
INSERT INTO `cmc_settle_summary` VALUES (513, '1648881415047870101', '减扣预发绩效', 60000.00, '何亚东（2019年1-12月）', '1');
INSERT INTO `cmc_settle_summary` VALUES (514, '1648881415047870101', '减扣预发绩效', 53000.00, '蒋剑虹（2019年1-12月）', '1');
INSERT INTO `cmc_settle_summary` VALUES (515, '1648881415047870101', '实际结算总金额', 244000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (516, '1648881415047870100', '结算费用合计', 330000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (517, '1648881415047870100', '减扣预发绩效', 60000.00, '向艳雄（2020.1-12月）', '1');
INSERT INTO `cmc_settle_summary` VALUES (518, '1648881415047870100', '减扣预发绩效', 60000.00, '何亚东（2020.1-12月）', '1');
INSERT INTO `cmc_settle_summary` VALUES (519, '1648881415047870100', '减扣预发绩效', 48000.00, '蒋剑虹（2020.1-12月）', '1');
INSERT INTO `cmc_settle_summary` VALUES (520, '1648881415047870100', '实际结算总金额', 162000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (521, '1648881415047870038', '结算费用合计', 51800.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (522, '1648881415047870093', '结算费用合计', 36000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (523, '1648881415047870093', '外业结算金额', 36000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (524, '1648881415047870093', '内业结算金额', 36000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (525, '1648881415047870093', '实际结算总金额', 36000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (526, '1648881415047870082', '项目委外金额', 754332.00, '合同支付', '1');
INSERT INTO `cmc_settle_summary` VALUES (527, '1648881415047870082', '外业质保金', 51591.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (528, '1648881415047870082', '汽车台班费', 15300.00, '现场用车85', '0');
INSERT INTO `cmc_settle_summary` VALUES (529, '1648881415047870082', '内业质保金', 33361.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (530, '1648881415047870082', '外业结算金额', 520581.00, '含GIS中心', '1');
INSERT INTO `cmc_settle_summary` VALUES (531, '1648881415047870082', '内业结算金额', 357054.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (532, '1648881415047870082', '实际结算总金额', 877635.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (533, '1648881415047870165', '结算费用合计', 465000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (534, '1648881415047870086', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (535, '1648881415047870086', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (536, '1648881415047870086', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (537, '1648881415047870086', '内业结算金额', 1705.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (538, '1648881415047870086', '实际结算总金额', 1705.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (539, '1648881415047870194', '测绘工程中心', 104600.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (540, '1648881415047870086', '结算费用合计', 1705.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (541, '1648881415047870194', '实际结算总金额', 104600.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (542, '1648881415047870165', '金川工程测量服务项目部结算金额', 465000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (543, '1648881415047870165', '金川工程测量服务项目部质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (544, '1648881415047870165', '实际结算总金额', 465000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (545, '1648881415047870194', '结算费用合计', 104600.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (546, '1648881415047870155', '结算费用合计', 5827.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (547, '1648881415047870136', '外业质保金', 6809.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (548, '1648881415047870136', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (549, '1648881415047870136', '外业结算金额', 61290.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (550, '1648881415047870136', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (551, '1648881415047870136', '实际结算总金额', 61290.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (552, '1648881415047870137', '结算费用合计', 2160.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (553, '1648881415047870082', '结算费用合计', 1732218.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (554, '1648881415047870136', '结算费用合计', 68099.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (555, '1648881415047870137', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (556, '1648881415047870137', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (557, '1648881415047870137', '外业结算金额', 2160.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (558, '1648881415047870137', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (559, '1648881415047870137', '实际结算总金额', 2160.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (560, '1648881415047870042', '结算费用合计', 3150.00, '100%', '2');
INSERT INTO `cmc_settle_summary` VALUES (561, '1648881415047870042', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (562, '1648881415047870042', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (563, '1648881415047870042', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (564, '1648881415047870042', '内业结算金额', 3150.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (565, '1648881415047870042', '实际结算总金额', 3150.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (566, '1648881415047870083', '外业质保金', 12060.00, '暂扣', '0');
INSERT INTO `cmc_settle_summary` VALUES (567, '1648881415047870083', '汽车台班费', 5400.00, '30天', '0');
INSERT INTO `cmc_settle_summary` VALUES (568, '1648881415047870083', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (569, '1648881415047870083', '外业结算金额', 103212.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (570, '1648881415047870083', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (571, '1648881415047870083', '实际结算总金额', 103212.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (572, '1648881415047870083', '结算费用合计', 120672.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (573, '1648881415047870092', '结算费用合计', 1618697.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (574, '1648881415047870092', '外业质保金', 161869.80, '暂扣10%', '0');
INSERT INTO `cmc_settle_summary` VALUES (575, '1648881415047870092', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (576, '1648881415047870092', '外业结算金额', 1456827.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (577, '1648881415047870092', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (578, '1648881415047870092', '实际结算总金额', 1456827.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (579, '1648881415047870155', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (580, '1648881415047870155', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (581, '1648881415047870155', '航测遥感中心结算金额', 1144.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (582, '1648881415047870155', '测绘工程中心结算金额', 4682.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (583, '1648881415047870039', '结算费用合计', 79424.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (584, '1648881415047870039', '外业质保金', 7942.40, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (585, '1648881415047870039', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (586, '1648881415047870039', '外业结算金额', 71481.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (587, '1648881415047870039', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (588, '1648881415047870039', '实际结算总金额', 71481.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (589, '1648881415047870142', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (590, '1648881415047870142', '测绘工程中心质保金', 500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (591, '1648881415047870142', '测绘工程中心', 8398.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (592, '1648881415047870142', '实际结算总金额', 8398.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (593, '1648881415047870208', '台班费', 1260.00, '川A2239Q，7天', '0');
INSERT INTO `cmc_settle_summary` VALUES (594, '1648881415047870180', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (595, '1648881415047870180', '外业结算金额', 193194.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (596, '1648881415047870142', '结算费用合计', 8898.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (597, '1648881415047870180', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (598, '1648881415047870180', '实际结算总金额', 193194.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (599, '1648881415047870185', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (600, '1648881415047870185', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (601, '1648881415047870208', '项目管理部质保金', 1600.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (602, '1648881415047870208', '项目管理部', 13440.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (603, '1648881415047870208', '航测遥感中心', 1260.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (604, '1648881415047870208', '实际结算总金额', 14700.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (605, '1648881415047870269', '台班费', 1080.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (606, '1648881415047870185', '结算费用合计', 477200.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (607, '1648881415047870185', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (608, '1648881415047870208', '结算费用合计', 17560.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (609, '1648881415047870185', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (610, '1648881415047870185', '实际结算总金额', 477200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (611, '1648881415047870269', '测绘工程中心质保金', 1500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (612, '1648881415047870269', '测绘工程中心', 17324.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (613, '1648881415047870269', '实际结算总金额', 17324.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (614, '1648881415047870376', '测绘工程中心', 13500.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (615, '1648881415047870376', '实际结算总金额', 13500.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (616, '1648881415047870237', '结算费用合计', 89373.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (617, '1648881415047870237', '测绘工程中心质保金', 4037.70, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (618, '1648881415047870237', '激光技术中心质保金', 1030.40, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (619, '1648881415047870237', '航测遥感中心质保金', 3869.10, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (620, '1648881415047870121', '结算费用合计', 37326.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (621, '1648881415047870121', '外业质保金', 3400.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (622, '1648881415047870121', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (623, '1648881415047870237', '测绘工程中心', 36339.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (624, '1648881415047870121', '外业结算金额', 30603.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (625, '1648881415047870121', '内业结算金额', 3323.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (626, '1648881415047870121', '实际结算总金额', 33926.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (627, '1648881415047870237', '激光技术中心', 9274.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (628, '1648881415047870237', '航测遥感中心', 34822.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (629, '1648881415047870237', '实际结算总金额', 89373.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (630, '1648881415047870269', '结算费用合计', 19904.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (631, '1648881415047870180', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (632, '1648881415047870386', '结算费用合计', 15554.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (633, '1648881415047870386', '台班费', 0.00, '地形图测绘使用车辆2天，地类图测绘使用测量2天', '0');
INSERT INTO `cmc_settle_summary` VALUES (634, '1648881415047870386', '航测遥感中心质保金', 380.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (635, '1648881415047870386', '测绘工程中心质保金', 520.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (636, '1648881415047870386', '航测遥感中心', 3581.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (637, '1648881415047870386', '测绘工程中心', 11073.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (638, '1648881415047870386', '实际结算总金额', 14654.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (639, '1648881415047870399', '结算费用合计', 8084.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (640, '1648881415047870399', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (641, '1648881415047870399', '测绘工程中心质保金', 600.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (642, '1648881415047870399', '航测遥感中心质保金', 100.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (643, '1648881415047870399', '测绘工程中心', 6140.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (644, '1648881415047870399', '航测遥感中心', 1244.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (645, '1648881415047870187', '结算费用合计', 8000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (646, '1648881415047870399', '实际结算总金额', 7384.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (647, '1648881415047870187', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (648, '1648881415047870187', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (649, '1648881415047870187', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (650, '1648881415047870187', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (651, '1648881415047870187', '实际结算总金额', 8000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (652, '1648881415047870216', '结算费用合计', 7000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (653, '1648881415047870216', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (654, '1648881415047870216', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (655, '1648881415047870376', '测绘工程中心质保金', 1500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (656, '1648881415047870216', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (657, '1648881415047870223', '实际结算总金额', 7000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (658, '1648881415047870156', '结算费用合计', 64995.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (659, '1648881415047870167', '结算费用合计', 16491.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (660, '1648881415047870167', '航测遥感中心质保金', 500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (661, '1648881415047870167', '测绘工程中心质保金', 800.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (662, '1648881415047870352', '结算费用合计', 33075.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (663, '1648881415047870352', '台班费', 900.00, '现场使用川A 6106T车辆5天', '0');
INSERT INTO `cmc_settle_summary` VALUES (664, '1648881415047870190', '测绘工程中心', 2500.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (665, '1648881415047870190', '实际结算总金额', 2500.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (666, '1648881415047870167', '航测遥感中心结算金额', 4945.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (667, '1648881415047870167', '测绘工程中心结算金额', 10246.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (668, '1648881415047870167', '实际结算总金额', 15191.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (669, '1648881415047870417', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (670, '1648881415047870417', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (671, '1648881415047870417', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (672, '1648881415047870417', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (673, '1648881415047870190', '结算费用合计', 2500.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (674, '1648881415047870417', '实际结算总金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (675, '1648881415047870352', '航测遥感中心质保金', 1200.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (676, '1648881415047870088', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (677, '1648881415047870088', '外业结算金额', 9000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (678, '1648881415047870088', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (679, '1648881415047870088', '实际结算总金额', 9000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (680, '1648881415047870141', '结算费用合计', 9000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (681, '1648881415047870141', '外业质保金', 900.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (682, '1648881415047870141', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (683, '1648881415047870141', '外业结算金额', 8100.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (684, '1648881415047870141', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (685, '1648881415047870141', '实际结算总金额', 8100.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (686, '1648881415047870158', '测绘工程中心', 200007.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (687, '1648881415047870158', '航测遥感中心', 4019.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (688, '1648881415047870095', '结算费用合计', 1920.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (689, '1648881415047870095', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (690, '1648881415047870095', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (691, '1648881415047870097', '结算费用合计', 712275.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (692, '1648881415047870097', '实际结算总金额', 712275.00, '未扣质量保证金', '1');
INSERT INTO `cmc_settle_summary` VALUES (693, '1648881415047870158', '地理信息中心', 630.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (694, '1648881415047870095', '外业结算金额', 1200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (695, '1648881415047870095', '内业结算金额', 720.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (696, '1648881415047870095', '实际结算总金额', 1920.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (697, '1648881415047870158', '实际结算总金额', 204656.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (698, '1648881415047870088', '结算费用合计', 10000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (699, '1648881415047870138', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (700, '1648881415047870138', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (701, '1648881415047870138', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (702, '1648881415047870138', '内业结算金额', 1470.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (703, '1648881415047870138', '实际结算总金额', 1470.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (704, '1648881415047870173', '结算费用合计', 26731.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (705, '1648881415047870173', '测绘工程中心质保金', 2000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (706, '1648881415047870105', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (707, '1648881415047870105', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (708, '1648881415047870105', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (709, '1648881415047870105', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (710, '1648881415047870105', '实际结算总金额', 6600.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (711, '1648881415047870173', '测绘工程中心结算金额', 24731.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (712, '1648881415047870173', '实际结算总金额', 24731.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (713, '1648881415047870158', '结算费用合计', 241879.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (714, '1648881415047870089', '结算费用合计', 6477.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (715, '1648881415047870129', '内业结算金额', 732.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (716, '1648881415047870129', '实际结算总金额', 5544.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (717, '1648881415047870104', '结算费用合计', 1761.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (718, '1648881415047870104', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (719, '1648881415047870104', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (720, '1648881415047870104', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (721, '1648881415047870104', '内业结算金额', 1761.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (722, '1648881415047870104', '实际结算总金额', 1761.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (723, '1648881415047870138', '结算费用合计', 1470.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (724, '1648881415047870094', '结算费用合计', 65000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (725, '1648881415047870094', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (726, '1648881415047870094', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (727, '1648881415047870094', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (728, '1648881415047870094', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (729, '1648881415047870094', '实际结算总金额', 65000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (730, '1648881415047870091', '结算费用合计', 187940.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (731, '1648881415047870091', '项目委外金额', 173000.00, '合同支付', '1');
INSERT INTO `cmc_settle_summary` VALUES (732, '1648881415047870091', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (733, '1648881415047870091', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (734, '1648881415047870091', '外业结算金额', 8640.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (735, '1648881415047870091', '内业结算金额', 6300.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (736, '1648881415047870091', '实际结算总金额', 14940.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (737, '1648881415047870066', '项目委外金额', 3800.00, '合同支付', '1');
INSERT INTO `cmc_settle_summary` VALUES (738, '1648881415047870066', '汽车台班费', 1080.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (739, '1648881415047870066', '外业质保金', 3256.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (740, '1648881415047870066', '实际结算总金额', 41410.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (741, '1648881415047870106', '外业质保金', 4972.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (742, '1648881415047870106', '外业结算金额', 45345.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (743, '1648881415047870068', '结算费用合计', 2013.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (744, '1648881415047870068', '外业质保金', 0.00, '小项目不扣除质量保证金', '0');
INSERT INTO `cmc_settle_summary` VALUES (745, '1648881415047870068', '外业结算金额', 2013.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (746, '1648881415047870068', '实际结算总金额', 2013.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (747, '1648881415047870066', '结算费用合计', 49546.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (748, '1648881415047870106', '实际结算总金额', 45345.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (749, '1648881415047870143', '结算费用合计', 5971.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (750, '1648881415047870106', '结算费用合计', 50316.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (751, '1648881415047870143', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (752, '1648881415047870143', '内业质保金', 597.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (753, '1648881415047870143', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (754, '1648881415047870143', '内业结算金额', 5971.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (755, '1648881415047870140', '结算费用合计', 620000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (756, '1648881415047870140', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (757, '1648881415047870140', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (758, '1648881415047870140', '外业结算金额', 620000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (759, '1648881415047870140', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (760, '1648881415047870140', '实际结算总金额', 620000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (761, '1648881415047870148', '结算费用合计', 78315.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (762, '1648881415047870148', '航测遥感中心', 78315.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (763, '1648881415047870148', '航测遥感中心质保金', 7800.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (764, '1648881415047870148', '实际结算总金额', 70515.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (765, '1648881415047870160', '测绘工程中心', 66246.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (766, '1648881415047870096', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (767, '1648881415047870102', '结算费用合计', 828.00, '本项目没有外业工作', '2');
INSERT INTO `cmc_settle_summary` VALUES (768, '1648881415047870102', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (769, '1648881415047870102', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (770, '1648881415047870102', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (771, '1648881415047870102', '内业结算金额', 828.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (772, '1648881415047870102', '实际结算总金额', 828.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (773, '1648881415047870160', '汽车台班费', 3600.00, '测绘工程中心', '0');
INSERT INTO `cmc_settle_summary` VALUES (774, '1648881415047870096', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (775, '1648881415047870096', '外业结算金额', 1066814.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (776, '1648881415047870096', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (777, '1648881415047870096', '实际结算总金额', 1066814.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (778, '1648881415047870143', '实际结算总金额', 5373.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (779, '1648881415047870096', '结算费用合计', 1066814.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (780, '1648881415047870160', '测绘工程中心质保金', 5500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (781, '1648881415047870160', '航测遥感中心', 1480.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (782, '1648881415047870160', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (783, '1648881415047870160', '激光技术中心', 38231.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (784, '1648881415047870160', '激光技术中心质保金', 2500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (785, '1648881415047870160', '实际结算总金额', 94385.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (786, '1648881415047870160', '结算费用合计', 105958.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (787, '1648881415047870146', '结算费用合计', 32505.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (788, '1648881415047870146', '工程监测中心', 32505.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (789, '1648881415047870146', '汽车台班费', 1440.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (790, '1648881415047870146', '航测遥感中心质保金', 3000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (791, '1648881415047870134', '结算费用合计', 21611.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (792, '1648881415047870134', '测绘工程中心质保金', 1000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (793, '1648881415047870134', '航测遥感中心质保金', 600.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (794, '1648881415047870134', '测绘工程中心', 13651.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (795, '1648881415047870134', '航测遥感中心', 6359.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (796, '1648881415047870134', '实际结算总金额', 20011.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (797, '1648881415047870010', '外业质保金', 118436.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (798, '1648881415047870010', '内业质保金', 85000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (799, '1648881415047870010', '汽车台班费', 41220.00, '现场用车（罗有权、凌涛）229天', '0');
INSERT INTO `cmc_settle_summary` VALUES (800, '1648881415047870010', '外业结算金额', 1024701.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (801, '1648881415047870010', '内业结算金额', 981658.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (802, '1648881415047870010', '实际结算总金额', 2006359.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (803, '1648881415047870251', '激光技术中心质保金', 5000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (804, '1648881415047870010', '结算费用合计', 2251014.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (805, '1648881415047870251', '激光技术中心', 49160.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (806, '1648881415047870251', '实际结算总金额', 49160.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (807, '1648881415047870157', '汽车台班费', 5580.00, '川A9802U使用12天，租车19天', '0');
INSERT INTO `cmc_settle_summary` VALUES (808, '1648881415047870157', '航测遥感中心质保金', 2000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (809, '1648881415047870131', '测绘工程中心质保金', 2300.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (810, '1648881415047870162', '结算费用合计', 4925.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (811, '1648881415047870162', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (812, '1648881415047870162', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (813, '1648881415047870162', '航测遥感中心结算金额', 646.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (814, '1648881415047870135', '结算费用合计', 20317.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (815, '1648881415047870251', '结算费用合计', 54160.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (816, '1648881415047870162', '测绘工程中心结算金额', 4279.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (817, '1648881415047870155', '实际结算总金额', 5827.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (818, '1648881415047870162', '实际结算总金额', 4745.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (819, '1648881415047870193', '结算费用合计', 12728.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (820, '1648881415047870193', '汽车台班费', 1080.00, '使用车辆川A9802U，共计6天', '0');
INSERT INTO `cmc_settle_summary` VALUES (821, '1648881415047870157', '测绘工程中心质保金', 7000.00, '租车、其他开支等未暂扣质保金', '0');
INSERT INTO `cmc_settle_summary` VALUES (822, '1648881415047870193', '测绘工程中心质保金', 1100.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (823, '1648881415047870157', '地理信息中心', 1680.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (824, '1648881415047870175', '测绘工程中心质保金', 500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (825, '1648881415047870175', '测绘工程中心', 6855.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (826, '1648881415047870193', '测绘工程中心结算金额', 10548.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (827, '1648881415047870193', '实际结算总金额', 10548.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (828, '1648881415047870126', '结算费用合计', 3073.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (829, '1648881415047870126', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (830, '1648881415047870126', '测绘工程中心结算金额', 3073.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (831, '1648881415047870126', '实际结算总金额', 3073.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (832, '1648881415047870166', '结算费用合计', 183528.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (833, '1648881415047870175', '实际结算总金额', 6855.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (834, '1648881415047870166', '汽车台班费', 13140.00, '使用公司车辆（川A 6692U）52天，租车21天', '0');
INSERT INTO `cmc_settle_summary` VALUES (835, '1648881415047870131', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (836, '1648881415047870131', '测绘工程中心', 20867.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (837, '1648881415047870175', '结算费用合计', 7355.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (838, '1648881415047870131', '航测遥感中心', 469.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (839, '1648881415047870131', '实际结算总金额', 21337.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (840, '1648881415047870166', '航测遥感中心质保金', 2600.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (841, '1648881415047870166', '测绘工程中心质保金', 12000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (842, '1648881415047870166', '航测遥感中心', 23965.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (843, '1648881415047870166', '测绘工程中心结算金额', 131823.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (844, '1648881415047870166', '实际结算总金额', 155788.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (845, '1648881415047870131', '结算费用合计', 23637.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (846, '1648881415047870090', '结算费用合计', 232102.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (847, '1648881415047870090', '工程监测中心质保金', 23105.00, '结算总费用23105元，按10%比例。序号3不扣质保金', '0');
INSERT INTO `cmc_settle_summary` VALUES (848, '1648881415047870090', '工程监测中心', 208997.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (849, '1648881415047870090', '实际结算总金额', 208997.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (850, '1648881415047870150', '结算费用合计', 257114.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (851, '1648881415047870150', '台班费', 7380.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (852, '1648881415047870150', '航测遥感中心质保金', 5000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (853, '1648881415047870150', '测绘工程中心质保金', 8000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (854, '1648881415047870150', '航测遥感中心', 51069.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (855, '1648881415047870150', '测绘工程中心', 185665.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (856, '1648881415047870150', '实际结算总金额', 236734.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (857, '1648881415047870128', '结算费用合计', 19800.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (858, '1648881415047870128', '测绘工程中心质保金', 1980.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (859, '1648881415047870128', '测绘工程中心', 17820.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (860, '1648881415047870128', '实际结算总金额', 17820.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (861, '1648881415047870157', '结算费用合计', 163625.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (862, '1648881415047870135', '外业质保金', 1500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (863, '1648881415047870135', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (864, '1648881415047870135', '外业结算金额', 14224.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (865, '1648881415047870135', '内业结算金额', 4594.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (866, '1648881415047870135', '实际结算总金额', 18818.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (867, '1648881415047870249', '测绘工程中心质保金', 1200.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (868, '1648881415047870249', '测绘工程中心', 14132.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (869, '1648881415047870249', '航测遥感中心', 173.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (870, '1648881415047870249', '实际结算总金额', 14712.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (871, '1648881415047870172', '结算费用合计', 24390.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (872, '1648881415047870172', '航测遥感中心质保金', 253.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (873, '1648881415047870172', '测绘工程中心质保金', 1455.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (874, '1648881415047870172', '航测遥感中心结算金额', 2274.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (875, '1648881415047870120', '结算费用合计', 54914.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (876, '1648881415047870120', '工程监测中心', 54914.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (877, '1648881415047870120', '工程监测中心质保金', 3970.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (878, '1648881415047870448', '结算费用合计', 840.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (879, '1648881415047870448', '地理信息中心', 420.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (880, '1648881415047870197', '结算费用合计', 16000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (881, '1648881415047870120', '扣款', 4400.00, '因质量问题，扣减进出场以外费用的10%', '0');
INSERT INTO `cmc_settle_summary` VALUES (882, '1648881415047870120', '实际结算总额', 46544.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (883, '1648881415047870172', '测绘工程中心结算金额', 20409.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (884, '1648881415047870172', '实际结算总金额', 22683.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (885, '1648881415047870189', '结算费用合计', 6360.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (886, '1648881415047870146', '实际结算总金额', 28605.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (887, '1648881415047870249', '结算费用合计', 16085.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (888, '1648881415047870448', '项目管理部', 420.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (889, '1648881415047870189', '测绘工程中心质保金', 570.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (890, '1648881415047870189', '测绘工程中心结算金额', 5790.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (891, '1648881415047870189', '实际结算总金额', 5790.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (892, '1648881415047870448', '实际结算总金额', 840.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (893, '1648881415047870411', '结算费用合计', 28620.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (894, '1648881415047870411', '激光技术中心质保金', 1100.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (895, '1648881415047870132', '结算费用合计', 20400.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (896, '1648881415047870132', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (897, '1648881415047870151', '结算费用合计', 3350.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (898, '1648881415047870151', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (899, '1648881415047870151', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (900, '1648881415047870151', '外业结算金额', 3350.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (901, '1648881415047870151', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (902, '1648881415047870151', '实际结算总金额', 3350.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (903, '1648881415047870147', '结算费用合计', 1000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (904, '1648881415047870147', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (905, '1648881415047870132', '内业质保金', 2040.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (906, '1648881415047870035', '内业质保金', 449.00, '结算费用的10% 单位：元', '0');
INSERT INTO `cmc_settle_summary` VALUES (907, '1648881415047870035', '汽车台班费', 1080.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (908, '1648881415047870035', '外业结算金额', 12743.00, '包含影像购买费用5000.00元', '1');
INSERT INTO `cmc_settle_summary` VALUES (909, '1648881415047870035', '内业结算金额', 4043.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (910, '1648881415047870035', '实际结算总金额', 16786.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (911, '1648881415047870069', '结算费用合计', 34723.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (912, '1648881415047870069', '外业质保金', 2676.00, '结算费用的10% 单位：元', '0');
INSERT INTO `cmc_settle_summary` VALUES (913, '1648881415047870069', '内业质保金', 798.00, '结算费用的10% 单位：元', '0');
INSERT INTO `cmc_settle_summary` VALUES (914, '1648881415047870069', '汽车台班费', 2160.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (915, '1648881415047870069', '外业结算金额', 21929.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (916, '1648881415047870069', '内业结算金额', 7160.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (917, '1648881415047870069', '实际结算总金额', 29089.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (918, '1648881415047870070', '结算费用合计', 41461.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (919, '1648881415047870070', '外业质保金', 2406.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (920, '1648881415047870070', '内业质保金', 961.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (921, '1648881415047870070', '汽车台班费', 1080.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (922, '1648881415047870070', '外业结算金额', 28579.00, '含支付飞行费用5000元', '1');
INSERT INTO `cmc_settle_summary` VALUES (923, '1648881415047870070', '内业结算金额', 8435.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (924, '1648881415047870070', '实际结算总金额', 37014.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (925, '1648881415047870132', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (926, '1648881415047870139', '结算费用合计', 10806.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (927, '1648881415047870139', '外业质保金', 500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (928, '1648881415047870139', '内业质保金', 500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (929, '1648881415047870139', '外业结算金额', 5201.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (930, '1648881415047870139', '内业结算金额', 4605.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (931, '1648881415047870139', '实际结算总金额', 9806.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (932, '1648881415047870072', '外业结算金额', 7350.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (933, '1648881415047870072', '内业结算金额', 137.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (934, '1648881415047870072', '实际结算总金额', 7487.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (935, '1648881415047870075', '实际结算总金额', 12045.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (936, '1648881415047870021', '航测遥感中心', 4183.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (937, '1648881415047870016', '结算费用合计', 6177.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (938, '1648881415047870016', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (939, '1648881415047870016', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (940, '1648881415047870016', '外业结算金额', 6260.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (941, '1648881415047870016', '内业结算金额', 177.36, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (942, '1648881415047870016', '实际结算总金额', 6437.36, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (943, '1648881415047870053', '结算费用合计', 73110.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (944, '1648881415047870053', '项目委外金额', 60000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (945, '1648881415047870053', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (946, '1648881415047870053', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (947, '1648881415047870053', '外业结算金额', 7020.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (948, '1648881415047870053', '内业结算金额', 6090.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (949, '1648881415047870053', '实际结算总金额', 13110.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (950, '1648881415047870072', '结算费用合计', 7486.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (951, '1648881415047870147', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (952, '1648881415047870147', '外业结算金额', 1000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (953, '1648881415047870147', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (954, '1648881415047870147', '实际结算总金额', 1000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (955, '1648881415047870023', '结算费用合计', 97473.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (956, '1648881415047870023', '测绘工程中心质保金', 9077.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (957, '1648881415047870023', '航测遥感中心质保金', 1236.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (958, '1648881415047870023', '测绘工程中心', 76036.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (959, '1648881415047870023', '航测遥感中心', 11124.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (960, '1648881415047870023', '实际结算总金额', 87160.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (961, '1648881415047870129', '结算费用合计', 6078.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (962, '1648881415047870129', '外业质保金', 534.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (963, '1648881415047870129', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (964, '1648881415047870041', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (965, '1648881415047870041', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (966, '1648881415047870041', '外业结算金额', 11522.50, '内外业均由测绘工程中心完成', '1');
INSERT INTO `cmc_settle_summary` VALUES (967, '1648881415047870233', '激光技术中心质保金', 11289.66, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (968, '1648881415047870233', '航测遥感中心质保金', 50472.06, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (969, '1648881415047870233', '测绘工程中心质保金', 113631.86, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (970, '1648881415047870233', '激光技术中心', 101606.94, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (971, '1648881415047870233', '航测遥感中心', 452318.52, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (972, '1648881415047870233', '测绘工程中心', 1174316.19, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (973, '1648881415047870233', '实际结算总金额', 1728241.65, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (974, '1648881415047870421', '结算费用合计', 1101546.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (975, '1648881415047870233', '结算费用合计', 1937835.23, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (976, '1648881415047870421', '工程监测中心质保金', 0.00, '考虑生产成本支出，质保金按5%暂扣', '0');
INSERT INTO `cmc_settle_summary` VALUES (977, '1648881415047870368', '航测遥感中心质保金', 1100.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (978, '1648881415047870368', '测绘工程中心质保金', 1700.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (979, '1648881415047870368', '航测遥感中心', 10060.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (980, '1648881415047870368', '测绘工程中心', 15580.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (981, '1648881415047870421', '工程监测中心', 1046469.46, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (982, '1648881415047870368', '实际结算总金额', 25640.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (983, '1648881415047870368', '结算费用合计', 28440.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (984, '1648881415047870339', '结算费用合计', 131968.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (985, '1648881415047870339', '台班费', 1800.00, '10天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (986, '1648881415047870204', '结算费用合计', 68250.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (987, '1648881415047870339', '测绘工程中心', 52095.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (988, '1648881415047870339', '测绘工程中心质保金', 5988.40, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (989, '1648881415047870339', '航测遥感中心', 53515.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (990, '1648881415047870421', '实际结算总金额', 1046469.46, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (991, '1648881415047870339', '航测遥感中心质保金', 5946.20, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (992, '1648881415047870425', '激光技术中心', 4155.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (993, '1648881415047870425', '实际结算总金额', 4155.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (994, '1648881415047870425', '结算费用合计', 4155.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (995, '1648881415047870339', '激光技术中心', 11360.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (996, '1648881415047870339', '激光技术中心质保金', 1262.30, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (997, '1648881415047870339', '实际结算总金额', 116971.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (998, '1648881415047870204', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (999, '1648881415047870204', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1000, '1648881415047870204', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1001, '1648881415047870204', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1002, '1648881415047870204', '实际结算总金额', 68250.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1003, '1648881415047870281', '结算费用合计', 17286.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1004, '1648881415047870231', '结算费用合计', 4530.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1005, '1648881415047870231', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1006, '1648881415047870174', '外业质保金', 2762.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1007, '1648881415047870174', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1008, '1648881415047870174', '外业结算金额', 27622.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1009, '1648881415047870174', '内业结算金额', 812.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1010, '1648881415047870174', '实际结算总金额', 25672.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1011, '1648881415047870130', '结算费用合计', 3991.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1012, '1648881415047870130', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1013, '1648881415047870130', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1014, '1648881415047870130', '外业结算金额', 3860.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1015, '1648881415047870130', '内业结算金额', 131.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1016, '1648881415047870130', '实际结算总金额', 3991.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1017, '1648881415047870206', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1018, '1648881415047870206', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1019, '1648881415047870206', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1020, '1648881415047870206', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1021, '1648881415047870206', '实际结算总金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1022, '1648881415047870174', '结算费用合计', 28434.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1023, '1648881415047870182', '结算费用合计', 9929.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1024, '1648881415047870182', '金川工程测量服务项目部', 8193.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1025, '1648881415047870182', '金川工程测量服务项目部质保金', 800.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1026, '1648881415047870182', '航测遥感中心', 1736.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1027, '1648881415047870182', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1028, '1648881415047870182', '实际结算总金额', 9129.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1029, '1648881415047870149', '汽车台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1030, '1648881415047870149', '测绘工程中心质保金', 3000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1031, '1648881415047870149', '测绘工程中心', 52006.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1032, '1648881415047870149', '实际结算总金额', 52006.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1033, '1648881415047870229', '结算费用合计', 465000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1034, '1648881415047870229', '金川测量中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1035, '1648881415047870229', '金川测量中心', 465000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1036, '1648881415047870149', '结算费用合计', 55006.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1037, '1648881415047870229', '实际结算总金额', 465000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1038, '1648881415047870122', '结算费用合计', 9547.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1039, '1648881415047870122', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1040, '1648881415047870122', '测绘工程中心质保金', 800.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1041, '1648881415047870145', '结算费用合计', 465000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1042, '1648881415047870122', '测绘工程中心结算金额', 8747.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1043, '1648881415047870145', '金川工程测量服务项目部结算金额', 465000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1044, '1648881415047870145', '金川工程测量服务项目部质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1045, '1648881415047870145', '实际结算总金额', 465000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1046, '1648881415047870206', '结算费用合计', 33388.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1047, '1648881415047870220', '结算费用合计', 142434.60, '结算方案看附件', '2');
INSERT INTO `cmc_settle_summary` VALUES (1048, '1648881415047870168', '结算费用合计', 8537.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1049, '1648881415047870220', '项目管理部', 142434.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1050, '1648881415047870168', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1051, '1648881415047870220', '项目管理部质保金', 14200.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1052, '1648881415047870179', '结算费用合计', 269915.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1053, '1648881415047870179', '汽车台班费', 0.00, '本项目车辆由公司提供', '0');
INSERT INTO `cmc_settle_summary` VALUES (1054, '1648881415047870179', '外业质保金', 27000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1055, '1648881415047870179', '外业结算金额', 242915.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1056, '1648881415047870179', '实际结算总金额', 242915.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1057, '1648881415047870168', '测绘工程中心质保金', 500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1058, '1648881415047870220', '实际结算总金额', 128234.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1059, '1648881415047870087', '结算费用合计', 420.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1060, '1648881415047870087', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1061, '1648881415047870087', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1062, '1648881415047870168', '航测遥感中心结算金额', 400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1063, '1648881415047870087', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1064, '1648881415047870122', '实际结算总金额', 8747.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1065, '1648881415047870087', '内业结算金额', 420.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1066, '1648881415047870087', '实际结算总金额', 420.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1067, '1648881415047870168', '测绘工程中心结算金额', 7637.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1068, '1648881415047870168', '实际结算总金额', 8037.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1069, '1648881415047870181', '结算费用合计', 7971.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1070, '1648881415047870181', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1071, '1648881415047870181', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1072, '1648881415047870181', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1073, '1648881415047870181', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1074, '1648881415047870181', '实际结算总金额', 7971.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1075, '1648881415047870144', '结算费用合计', 8630.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1076, '1648881415047870144', '汽车台班费', 540.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1077, '1648881415047870144', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1078, '1648881415047870144', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1079, '1648881415047870144', '测绘工程中心内业组', 517.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1080, '1648881415047870144', '地理信息中心', 1034.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1081, '1648881415047870144', '测绘工程中心结算金额', 6539.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1082, '1648881415047870144', '实际结算总金额', 8090.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1083, '1648881415047870268', '结算费用合计', 4664.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1084, '1648881415047870268', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1085, '1648881415047870268', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1086, '1648881415047870268', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1087, '1648881415047870268', '测绘工程中心', 3904.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1088, '1648881415047870268', '航测遥感中心', 760.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1089, '1648881415047870261', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1090, '1648881415047870133', '汽车台班费', 0.00, '车辆只有进出场', '0');
INSERT INTO `cmc_settle_summary` VALUES (1091, '1648881415047870133', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1092, '1648881415047870261', '航测遥感中心', 400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1093, '1648881415047870133', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1094, '1648881415047870133', '测绘工程中心内业组', 29.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1095, '1648881415047870133', '测绘工程中心结算金额', 2908.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1096, '1648881415047870133', '实际结算总金额', 2908.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1097, '1648881415047870261', '实际结算总金额', 400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1098, '1648881415047870264', '台班费', 2160.00, '12天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (1099, '1648881415047870264', '测绘工程中心', 37368.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1100, '1648881415047870264', '实际结算总金额', 37368.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1101, '1648881415047870268', '实际结算总金额', 4664.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1102, '1648881415047870261', '结算费用合计', 400.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1103, '1648881415047870264', '结算费用合计', 39528.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1104, '1648881415047870389', '结算费用合计', 549.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1105, '1648881415047870389', '地理信息中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1106, '1648881415047870243', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1107, '1648881415047870389', '地理信息中心', 549.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1108, '1648881415047870359', '台班费', 0.00, '现场未使用公司车辆', '0');
INSERT INTO `cmc_settle_summary` VALUES (1109, '1648881415047870359', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1110, '1648881415047870389', '实际结算总金额', 549.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1111, '1648881415047870243', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1112, '1648881415047870161', '结算费用合计', 42120.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1113, '1648881415047870161', '汽车台班费', 1440.00, '使用车辆川A 1686T共计8天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1114, '1648881415047870161', '测绘工程中心质保金', 4080.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1115, '1648881415047870161', '测绘工程中心', 36600.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1116, '1648881415047870359', '测绘工程中心', 3600.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1117, '1648881415047870359', '实际结算总金额', 3600.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1118, '1648881415047870216', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1119, '1648881415047870440', '激光技术中心质保金', 2217.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1120, '1648881415047870440', '测绘工程中心', 20054.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1121, '1648881415047870325', '结算费用合计', 3906.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1122, '1648881415047870325', '两河口测量中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1123, '1648881415047870325', '两河口测量中心', 3506.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1124, '1648881415047870440', '航测遥感中心', 19480.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1125, '1648881415047870440', '激光技术中心', 19953.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1126, '1648881415047870440', '实际结算总金额', 59488.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1127, '1648881415047870262', '结算费用合计', 25438.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1128, '1648881415047870231', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1129, '1648881415047870231', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1130, '1648881415047870231', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1131, '1648881415047870231', '实际结算总金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1132, '1648881415047870224', '其他外业', 120000.00, '两河口移民代建项目', '1');
INSERT INTO `cmc_settle_summary` VALUES (1133, '1648881415047870224', '实际结算总金额', 120000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1134, '1648881415047870225', '台班费', 5760.00, '用车28天+4天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1135, '1648881415047870225', '航测遥感中心质保金', 1277.80, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1136, '1648881415047870225', '地理信息中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1137, '1648881415047870225', '测绘工程中心质保金', 12436.70, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1138, '1648881415047870224', '结算费用合计', 120000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1139, '1648881415047870225', '航测遥感中心', 11500.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1140, '1648881415047870225', '地理信息中心', 2649.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1141, '1648881415047870225', '结算费用合计', 148729.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1142, '1648881415047870225', '测绘工程中心', 106170.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1143, '1648881415047870225', '实际结算总金额', 120320.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1144, '1648881415047870329', '外业质保金', 11486.05, '外业结算金额10%', '0');
INSERT INTO `cmc_settle_summary` VALUES (1145, '1648881415047870329', '内业质保金', 11486.05, '内业结算金额10%', '0');
INSERT INTO `cmc_settle_summary` VALUES (1146, '1648881415047870329', '外业结算金额', 103374.45, '外业结算金额90%', '1');
INSERT INTO `cmc_settle_summary` VALUES (1147, '1648881415047870329', '内业结算金额', 103374.45, '内业结算金额90%', '1');
INSERT INTO `cmc_settle_summary` VALUES (1148, '1648881415047870329', '实际结算总金额', 206748.90, '总结算金额90%', '1');
INSERT INTO `cmc_settle_summary` VALUES (1149, '1648881415047870329', '结算费用合计', 229721.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1150, '1648881415047870274', '工程监测中心质保金', 3772.80, '暂扣', '0');
INSERT INTO `cmc_settle_summary` VALUES (1151, '1648881415047870274', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1152, '1648881415047870274', '工程监测中心', 33955.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1153, '1648881415047870274', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1154, '1648881415047870274', '实际结算总金额', 33955.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1155, '1648881415047870274', '结算费用合计', 37728.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1156, '1648881415047870154', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1157, '1648881415047870154', '测绘工程中心', 6012.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1158, '1648881415047870154', '实际结算总金额', 6012.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1159, '1648881415047870364', '结算费用合计', 184133.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1160, '1648881415047870364', '台班费', 9900.00, '现场用车55天（包含2021C10、2021C11）', '0');
INSERT INTO `cmc_settle_summary` VALUES (1161, '1648881415047870364', '航测遥感中心质保金', 4000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1162, '1648881415047870364', '测绘工程中心质保金', 8800.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1163, '1648881415047870244', '结算费用合计', 172802.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1164, '1648881415047870369', '结算费用合计', 4024.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1165, '1648881415047870369', '台班费', 0.00, '现场未使用公司车辆', '0');
INSERT INTO `cmc_settle_summary` VALUES (1166, '1648881415047870369', '双江口测量中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1167, '1648881415047870369', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1168, '1648881415047870369', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1169, '1648881415047870369', '双江口测量中心', 822.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1170, '1648881415047870154', '结算费用合计', 6012.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1171, '1648881415047870369', '航测遥感中心', 522.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1172, '1648881415047870369', '测绘工程中心', 3680.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1173, '1648881415047870244', '工程监测中心质保金', 17280.25, '暂扣10%', '0');
INSERT INTO `cmc_settle_summary` VALUES (1174, '1648881415047870244', '工程监测中心', 155522.25, '结算金额90%', '1');
INSERT INTO `cmc_settle_summary` VALUES (1175, '1648881415047870244', '实际结算总金额', 155522.25, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1176, '1648881415047870398', '结算费用合计', 50587.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1177, '1648881415047870398', '台班费', 1080.00, '激光技术中心', '0');
INSERT INTO `cmc_settle_summary` VALUES (1178, '1648881415047870369', '实际结算总金额', 5024.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1179, '1648881415047870398', '激光技术中心质保金', 3145.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1180, '1648881415047870398', '测绘工程中心质保金', 1914.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1181, '1648881415047870398', '测绘工程中心', 17224.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1182, '1648881415047870398', '激光技术中心', 28304.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1183, '1648881415047870398', '实际结算总金额', 44448.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1184, '1648881415047870364', '航测遥感中心', 38424.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1185, '1648881415047870364', '测绘工程中心', 123008.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1186, '1648881415047870364', '扣款', 13000.00, '产品质量缺陷扣款', '0');
INSERT INTO `cmc_settle_summary` VALUES (1187, '1648881415047870275', '结算费用合计', 135875.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1188, '1648881415047870275', '测绘工程中心质保金', 6220.40, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1189, '1648881415047870364', '实际结算总金额', 148433.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1190, '1648881415047870275', '激光技术中心质保金', 4009.80, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1191, '1648881415047870243', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1192, '1648881415047870216', '实际结算总金额', 7000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1193, '1648881415047870223', '结算费用合计', 7000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1194, '1648881415047870243', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1195, '1648881415047870223', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1196, '1648881415047870223', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1197, '1648881415047870223', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1198, '1648881415047870223', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1199, '1648881415047870243', '实际结算总金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1200, '1648881415047870359', '结算费用合计', 3600.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1201, '1648881415047870243', '结算费用合计', 0.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1202, '1648881415047870133', '结算费用合计', 2908.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1203, '1648881415047870161', '实际结算总金额', 36600.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1204, '1648881415047870178', '结算费用合计', 542333.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1205, '1648881415047870201', '结算费用合计', 3769.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1206, '1648881415047870198', '结算费用合计', 698000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1207, '1648881415047870217', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1208, '1648881415047870217', '外业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1209, '1648881415047870217', '内业结算金额', 495.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1210, '1648881415047870217', '实际结算总金额', 495.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1211, '1648881415047870332', '结算费用合计', 51402.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1212, '1648881415047870332', '台班费', 5040.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1213, '1648881415047870332', '工程监测中心质保金', 5140.00, '暂扣质保金10%', '0');
INSERT INTO `cmc_settle_summary` VALUES (1214, '1648881415047870332', '工程监测中心', 41222.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1215, '1648881415047870332', '实际结算总金额', 41222.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1216, '1648881415047870347', '结算费用合计', 12398.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1217, '1648881415047870347', '测绘工程中心', 9701.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1218, '1648881415047870347', '测绘工程中心质保金', 1077.90, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1219, '1648881415047870347', '航测遥感中心', 1619.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1220, '1648881415047870347', '实际结算总金额', 11320.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1221, '1648881415047870342', '结算费用合计', 5760.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1222, '1648881415047870219', '双江口测量中心', 587200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1223, '1648881415047870219', '双江口测量中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1224, '1648881415047870219', '实际结算总金额', 587200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1225, '1648881415047870226', '台班费', 1080.00, '6天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1226, '1648881415047870226', '测绘工程中心质保金', 5611.30, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1227, '1648881415047870219', '结算费用合计', 587200.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1228, '1648881415047870127', '结算费用合计', 9953.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1229, '1648881415047870127', '汽车台班费', 360.00, '川A 3760U，现场用车2天 ', '0');
INSERT INTO `cmc_settle_summary` VALUES (1230, '1648881415047870127', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1231, '1648881415047870127', '测绘工程中心质保金', 656.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1232, '1648881415047870127', '航测遥感中心结算金额', 1049.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1233, '1648881415047870178', '汽车台班费', 14040.00, '项目使用川A6692U、川A2239Q，共计78天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1234, '1648881415047870226', '测绘工程中心', 49421.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1235, '1648881415047870226', '实际结算总金额', 49421.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1236, '1648881415047870195', '结算费用合计', 23663.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1237, '1648881415047870226', '结算费用合计', 56112.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1238, '1648881415047870195', '台班费', 720.00, '用车4天。', '0');
INSERT INTO `cmc_settle_summary` VALUES (1239, '1648881415047870195', '测绘工程中心质保金', 2366.40, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1240, '1648881415047870198', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1241, '1648881415047870198', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1242, '1648881415047870198', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1243, '1648881415047870198', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1244, '1648881415047870198', '实际结算总金额', 698000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1245, '1648881415047870178', '航测遥感中心质保金', 13745.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1246, '1648881415047870178', '地理信息中心质保金', 777.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1247, '1648881415047870178', '测绘工程中心质保金', 35591.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1248, '1648881415047870178', '航测遥感中心结算金额', 106308.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1249, '1648881415047870178', '地理信息中心结算', 6993.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1250, '1648881415047870178', '测绘工程中心结算金额', 364879.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1251, '1648881415047870178', '实际结算总金额', 478180.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1252, '1648881415047870360', '结算费用合计', 35212.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1253, '1648881415047870195', '测绘工程中心', 20577.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1254, '1648881415047870360', '台班费', 0.00, '现场使用川A2239Q车辆22天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1255, '1648881415047870195', '实际结算总金额', 20577.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1256, '1648881415047870248', '结算费用合计', 489816.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1257, '1648881415047870248', '台班费', 22860.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1258, '1648881415047870360', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1259, '1648881415047870248', '测绘工程中心质保金', 35414.30, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1260, '1648881415047870248', '航测遥感中心质保金', 4266.10, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1261, '1648881415047870248', '测绘工程中心', 388881.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1262, '1648881415047870342', '测绘工程中心', 5760.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1263, '1648881415047870248', '航测遥感中心', 38394.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1264, '1648881415047870127', '测绘工程中心结算金额', 7888.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1265, '1648881415047870248', '实际结算总金额', 427275.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1266, '1648881415047870199', '结算费用合计', 27852.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1267, '1648881415047870199', '测绘工程中心质保金', 1620.50, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1268, '1648881415047870199', '航测遥感中心质保金', 1100.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1269, '1648881415047870199', '测绘工程中心', 14698.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1270, '1648881415047870199', '航测遥感中心', 10433.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1271, '1648881415047870199', '实际结算总金额', 25131.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1272, '1648881415047870342', '实际结算总金额', 5760.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1273, '1648881415047870306', '结算费用合计', 8422.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1274, '1648881415047870306', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1275, '1648881415047870217', '结算费用合计', 495.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1276, '1648881415047870306', '测绘工程中心', 7580.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1277, '1648881415047870306', '测绘工程中心质保金', 842.20, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1278, '1648881415047870306', '实际结算总金额', 7580.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1279, '1648881415047870360', '测绘工程中心质保金', 2800.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1280, '1648881415047870338', '结算费用合计', 47998.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1281, '1648881415047870127', '实际结算总金额', 8937.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1282, '1648881415047870360', '航测遥感中心', 461.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1283, '1648881415047870338', '台班费', 1620.00, '9天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (1284, '1648881415047870184', '结算费用合计', 105654.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1285, '1648881415047870184', '激光技术中心质保金', 3700.00, '空域办理等费用，未扣质保金', '0');
INSERT INTO `cmc_settle_summary` VALUES (1286, '1648881415047870184', '地理信息中心质保金', 3200.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1287, '1648881415047870184', '激光技术中心', 69839.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1288, '1648881415047870184', '地理信息中心', 28914.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1289, '1648881415047870184', '实际结算总金额', 98754.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1290, '1648881415047870246', '结算费用合计', 80040.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1291, '1648881415047870246', '汽车台班费', 7740.00, '车辆使用合计43天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1292, '1648881415047870246', '测绘工程中心质保金', 7300.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1293, '1648881415047870246', '测绘工程中心', 65000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1294, '1648881415047870246', '实际结算总金额', 65000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1295, '1648881415047870214', '结算费用合计', 400000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1296, '1648881415047870207', '工程监测中心', 4324.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1297, '1648881415047870322', '台班费', 1800.00, '10天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (1298, '1648881415047870322', '测绘工程中心', 47620.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1299, '1648881415047870322', '测绘工程中心质保金', 5491.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1300, '1648881415047870322', '航测遥感中心', 44638.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1301, '1648881415047870322', '航测遥感中心质保金', 4959.80, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1302, '1648881415047870322', '实际结算总金额', 92258.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1303, '1648881415047870322', '结算费用合计', 104509.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1304, '1648881415047870202', '激光技术中心', 7560.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1305, '1648881415047870202', '激光技术中心质保金', 756.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1306, '1648881415047870202', '地理信息中心', 4106.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1307, '1648881415047870202', '地理信息中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1308, '1648881415047870222', '结算费用合计', 724150.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1309, '1648881415047870222', '经营发展部', 724150.00, '经营发展部杨俊为项目负责人，生产部门参与', '1');
INSERT INTO `cmc_settle_summary` VALUES (1310, '1648881415047870222', '经营发展部质保金', 72000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1311, '1648881415047870222', '实际结算总金额', 652150.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1312, '1648881415047870202', '结算费用合计', 11666.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1313, '1648881415047870202', '实际结算总金额', 10910.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1314, '1648881415047870284', '结算费用合计', 52830.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1315, '1648881415047870284', '两河口测量中心质保金', 2475.20, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1316, '1648881415047870259', '结算费用合计', 4406.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1317, '1648881415047870259', '航测遥感中心', 905.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1318, '1648881415047870259', '两河口测量中心', 3501.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1319, '1648881415047870259', '实际结算总金额', 4406.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1320, '1648881415047870284', '测绘工程中心质保金', 838.80, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1321, '1648881415047870284', '航测遥感中心质保金', 1969.10, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1322, '1648881415047870284', '两河口测量中心', 21736.90, '20476.9', '1');
INSERT INTO `cmc_settle_summary` VALUES (1323, '1648881415047870284', '测绘工程中心', 6829.10, '6829.1', '1');
INSERT INTO `cmc_settle_summary` VALUES (1324, '1648881415047870284', '航测遥感中心', 17721.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1325, '1648881415047870328', '航测遥感中心质保金', 1950.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1326, '1648881415047870284', '台班费', 540.00, '两河口测量中心', '0');
INSERT INTO `cmc_settle_summary` VALUES (1327, '1648881415047870320', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1328, '1648881415047870320', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1329, '1648881415047870320', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1330, '1648881415047870320', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1331, '1648881415047870320', '实际结算总金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1332, '1648881415047870328', '测绘工程中心质保金', 3500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1333, '1648881415047870320', '结算费用合计', 0.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1334, '1648881415047870284', '台班费', 720.00, '测绘工程中心', '0');
INSERT INTO `cmc_settle_summary` VALUES (1335, '1648881415047870284', '实际结算总金额', 46287.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1336, '1648881415047870242', '结算费用合计', 1881898.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1337, '1648881415047870242', '工程监测中心质保金', 188189.83, '暂扣10%', '0');
INSERT INTO `cmc_settle_summary` VALUES (1338, '1648881415047870328', '航测遥感中心', 18550.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1339, '1648881415047870328', '测绘工程中心', 26649.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1340, '1648881415047870328', '实际结算总金额', 45200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1341, '1648881415047870207', '工程监测中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1342, '1648881415047870207', '航测遥感中心', 1426.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1343, '1648881415047870207', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1344, '1648881415047870207', '实际结算总金额', 5751.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1345, '1648881415047870201', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1346, '1648881415047870328', '结算费用合计', 50650.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1347, '1648881415047870293', '结算费用合计', 2640.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1348, '1648881415047870201', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1349, '1648881415047870207', '结算费用合计', 5751.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1350, '1648881415047870293', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1351, '1648881415047870293', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1352, '1648881415047870293', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1353, '1648881415047870293', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1354, '1648881415047870293', '实际结算总金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1355, '1648881415047870201', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1356, '1648881415047870201', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1357, '1648881415047870180', '结算费用合计', 193194.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1358, '1648881415047870213', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1359, '1648881415047870213', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1360, '1648881415047870213', '外业结算金额', 180000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1361, '1648881415047870213', '内业结算金额', 25000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1362, '1648881415047870213', '实际结算总金额', 205000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1363, '1648881415047870325', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1364, '1648881415047870118', '结算费用合计', 154658.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1365, '1648881415047870118', '激光技术中心', 52786.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1366, '1648881415047870118', '激光技术中心质保金', 4000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1367, '1648881415047870118', '测绘工程中心', 85100.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1368, '1648881415047870118', '测绘工程中心质保金', 5000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1369, '1648881415047870118', '航测遥感中心', 3192.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1370, '1648881415047870118', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1371, '1648881415047870118', '地理信息中心', 13580.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1372, '1648881415047870118', '地理信息中心质保金', 1300.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1373, '1648881415047870118', '实际结算总金额', 144358.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1374, '1648881415047870171', '测绘工程中心', 18108.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1375, '1648881415047870171', '测绘工程中心质保金', 1810.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1376, '1648881415047870171', '实际结算总金额', 16298.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1377, '1648881415047870209', '结算费用合计', 1179423.50, '按照合同额的8.5%结算，共计1179423.45元', '2');
INSERT INTO `cmc_settle_summary` VALUES (1378, '1648881415047870213', '结算费用合计', 205000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1379, '1648881415047870410', '两河口测量中心', 646750.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1380, '1648881415047870410', '需减扣德方费用', 19250.00, '唐小辉借调由公司代发的绩效，截止2023年3月31日', '0');
INSERT INTO `cmc_settle_summary` VALUES (1381, '1648881415047870410', '实际结算总金额', 646750.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1382, '1648881415047870205', '结算费用合计', 105818.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1383, '1648881415047870205', '测绘工程中心', 38230.60, '已扣台班费', '1');
INSERT INTO `cmc_settle_summary` VALUES (1384, '1648881415047870326', '结算费用合计', 80640.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1385, '1648881415047870326', '台班费', 3960.00, '22天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (1386, '1648881415047870326', '测绘工程中心', 68616.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1387, '1648881415047870212', '结算费用合计', 101479.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1388, '1648881415047870212', '测绘工程中心质保金', 10866.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1389, '1648881415047870212', '测绘工程中心', 90613.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1390, '1648881415047870212', '实际结算总金额', 90613.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1391, '1648881415047870410', '结算费用合计', 666000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1392, '1648881415047870205', '地理信息中心', 51987.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1393, '1648881415047870205', '两河口测量中心', 12000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1394, '1648881415047870205', '台班费', 3600.00, '现场用车20天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1395, '1648881415047870205', '实际结算总金额', 102218.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1396, '1648881415047870403', '结算费用合计', 115620.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1397, '1648881415047870403', '工程监测中心质保金', 11562.00, '10%质保金', '0');
INSERT INTO `cmc_settle_summary` VALUES (1398, '1648881415047870326', '测绘工程中心质保金', 8064.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1399, '1648881415047870326', '实际结算总金额', 68616.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1400, '1648881415047870403', '工程监测中心', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1401, '1648881415047870403', '实际结算总金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1402, '1648881415047870349', '结算费用合计', 1020.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1403, '1648881415047870349', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1404, '1648881415047870349', '测绘工程中心', 1020.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1405, '1648881415047870325', '测绘工程中心', 400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1406, '1648881415047870349', '实际结算总金额', 1020.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1407, '1648881415047870430', '结算费用合计', 276909.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1408, '1648881415047870430', '实际结算总金额', 276909.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1409, '1648881415047870317', '测绘工程中心', 68400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1410, '1648881415047870317', '实际结算总金额', 68400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1411, '1648881415047870313', '结算费用合计', 7200.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1412, '1648881415047870317', '结算费用合计', 68400.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1413, '1648881415047870313', '测绘工程中心', 7200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1414, '1648881415047870313', '实际结算总金额', 7200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1415, '1648881415047870272', '结算费用合计', 4320.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1416, '1648881415047870272', '测绘工程中心', 4320.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1417, '1648881415047870272', '实际结算总金额', 4320.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1418, '1648881415047870440', '结算费用合计', 68498.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1419, '1648881415047870440', '台班费', 2160.00, '12天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (1420, '1648881415047870440', '测绘工程中心质保金', 2468.30, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1421, '1648881415047870440', '航测遥感中心质保金', 2164.50, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1422, '1648881415047870352', '测绘工程中心质保金', 1650.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1423, '1648881415047870352', '航测遥感中心', 10783.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1424, '1648881415047870156', '汽车台班费', 2160.00, '使用川川A9802U，共计12天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1425, '1648881415047870156', '测绘工程中心质保金', 4675.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1426, '1648881415047870352', '测绘工程中心', 18542.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1427, '1648881415047870352', '实际结算总金额', 29325.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1428, '1648881415047870117', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1429, '1648881415047870117', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1430, '1648881415047870117', '外业结算金额', 690000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1431, '1648881415047870117', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1432, '1648881415047870117', '实际结算总金额', 690000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1433, '1648881415047870124', '结算费用合计', 8295.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1434, '1648881415047870348', '结算费用合计', 11660.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1435, '1648881415047870348', '台班费', 0.00, '项目未使用公司车辆', '0');
INSERT INTO `cmc_settle_summary` VALUES (1436, '1648881415047870348', '技术质量部质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1437, '1648881415047870348', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1438, '1648881415047870348', '技术质量部', 2940.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1439, '1648881415047870348', '测绘工程中心', 8720.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1440, '1648881415047870348', '实际结算总金额', 11660.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1441, '1648881415047870156', '测绘工程中心', 58160.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1442, '1648881415047870156', '实际结算总金额', 58160.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1443, '1648881415047870159', '结算费用合计', 158900.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1444, '1648881415047870159', '航测遥感中心质保金', 3592.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1445, '1648881415047870159', '测绘工程中心质保金', 9000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1446, '1648881415047870159', '台班费', 3060.00, '租车21天，不含进出场使用17天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1447, '1648881415047870159', '航测遥感中心结算金额', 32332.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1448, '1648881415047870159', '测绘工程中心结算金额', 110915.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1449, '1648881415047870159', '实际结算总金额', 143248.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1450, '1648881415047870163', '汽车台班费', 1800.00, '使用车辆川A 1081W、川A 2239Q、川A 1686T，共计10天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1451, '1648881415047870163', '航测遥感中心质保金', 1840.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1452, '1648881415047870163', '地理信息中心质保金', 517.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1453, '1648881415047870163', '测绘工程中心质保金', 9764.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1454, '1648881415047870163', '航测遥感中心结算金额', 16561.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1455, '1648881415047870163', '地理信息中心结算', 4653.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1456, '1648881415047870163', '结算费用合计', 134552.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1457, '1648881415047870163', '测绘工程中心结算金额', 99417.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1458, '1648881415047870163', '实际结算总金额', 120631.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1459, '1648881415047870117', '结算费用合计', 690000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1460, '1648881415047870125', '结算费用合计', 6120.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1461, '1648881415047870124', '汽车台班费', 540.00, '使用车辆3天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1462, '1648881415047870125', '测绘工程中心', 6120.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1463, '1648881415047870124', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1464, '1648881415047870124', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1465, '1648881415047870124', '测绘工程中心内业组', 231.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1466, '1648881415047870124', '测绘工程中心结算金额', 7755.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1467, '1648881415047870124', '实际结算总金额', 7755.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1468, '1648881415047870125', '实际结算总金额', 6120.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1469, '1648881415047870417', '结算费用合计', 13915.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1470, '1648881415047870211', '台班费', 11160.00, '租用皮卡车30天、全顺32天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1471, '1648881415047870153', '汽车台班费', 2160.00, '使用车辆川A9802U，共计12天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1472, '1648881415047870153', '航测遥感中心质保金', 3811.50, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1473, '1648881415047870153', '激光技术中心质保金', 960.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1474, '1648881415047870153', '结算费用合计', 64335.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1475, '1648881415047870153', '测绘工程中心质保金', 471.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1476, '1648881415047870153', '航测遥感中心', 34303.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1477, '1648881415047870255', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1478, '1648881415047870255', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1479, '1648881415047870255', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1480, '1648881415047870255', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1481, '1648881415047870255', '实际结算总金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1482, '1648881415047870211', '测绘工程中心质保金', 43771.90, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1483, '1648881415047870255', '结算费用合计', 14911.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1484, '1648881415047870211', '航测遥感中心质保金', 20327.60, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1485, '1648881415047870211', '航测遥感中心', 182948.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1486, '1648881415047870211', '测绘工程中心', 381167.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1487, '1648881415047870211', '实际结算总金额', 564115.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1488, '1648881415047870211', '结算费用合计', 639375.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1489, '1648881415047870153', '激光技术中心', 8640.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1490, '1648881415047870153', '测绘工程中心', 13989.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1491, '1648881415047870153', '实际结算总金额', 56932.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1492, '1648881415047870233', '台班费', 34200.00, '累计190辆/天，其中现场租车89辆/天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1493, '1648881415047870451', '台班费', 0.00, '现场用车5天，不扣台班费', '0');
INSERT INTO `cmc_settle_summary` VALUES (1494, '1648881415047870294', '结算费用合计', 1362.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1495, '1648881415047870294', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1496, '1648881415047870294', '测绘工程中心', 1362.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1497, '1648881415047870294', '实际结算总金额', 1362.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1498, '1648881415047870336', '航测遥感中心', 26612.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1499, '1648881415047870350', '台班费', 0.00, '现场使用 川A1081W车辆4天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1500, '1648881415047870350', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1501, '1648881415047870350', '测绘工程中心质保金', 700.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1502, '1648881415047870350', '航测遥感中心', 3539.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1503, '1648881415047870350', '测绘工程中心', 10150.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1504, '1648881415047870350', '实际结算总金额', 13689.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1505, '1648881415047870451', '实际结算总金额', 9212.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1506, '1648881415047870367', '结算费用合计', 48791.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1507, '1648881415047870378', '台班费', 1080.00, '现场使用川A1081W车辆6天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1508, '1648881415047870378', '航测遥感中心质保金', 1000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1509, '1648881415047870378', '测绘工程中心质保金', 1350.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1510, '1648881415047870378', '航测遥感中心', 8659.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1511, '1648881415047870275', '航测遥感中心质保金', 3357.30, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1512, '1648881415047870299', '结算费用合计', 8622.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1513, '1648881415047870299', '测绘工程中心', 8622.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1514, '1648881415047870299', '实际结算总金额', 8622.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1515, '1648881415047870451', '结算费用合计', 10202.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1516, '1648881415047870275', '测绘工程中心', 55983.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1517, '1648881415047870378', '测绘工程中心', 21404.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1518, '1648881415047870378', '结算费用合计', 33493.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1519, '1648881415047870378', '实际结算总金额', 30063.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1520, '1648881415047870336', '航测遥感中心质保金', 2956.90, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1521, '1648881415047870336', '激光技术中心', 16713.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1522, '1648881415047870336', '激光技术中心质保金', 1857.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1523, '1648881415047870401', '测绘工程中心', 495.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1524, '1648881415047870323', '结算费用合计', 32241.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1525, '1648881415047870323', '激光技术中心质保金', 800.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1526, '1648881415047870323', '地理信息中心质保金', 350.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1527, '1648881415047870323', '航测遥感中心质保金', 850.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1528, '1648881415047870323', '测绘工程中心质保金', 800.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1529, '1648881415047870275', '激光技术中心', 36088.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1530, '1648881415047870275', '航测遥感中心', 30215.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1531, '1648881415047870275', '台班费', 4680.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1532, '1648881415047870275', '实际结算总金额', 117607.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1533, '1648881415047870256', '激光技术中心质保金', 5000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1534, '1648881415047870256', '实际结算总金额', 49167.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1535, '1648881415047870240', '结算费用合计', 703.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1536, '1648881415047870240', '航测遥感中心', 703.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1537, '1648881415047870240', '实际结算总金额', 703.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1538, '1648881415047870256', '结算费用合计', 54167.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1539, '1648881415047870308', '结算费用合计', 223658.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1540, '1648881415047870308', '台班费', 3240.00, '18天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (1541, '1648881415047870291', '测绘工程中心', 4753.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1542, '1648881415047870291', '金川测量中心', 2361.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1543, '1648881415047870323', '地理信息中心', 3427.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1544, '1648881415047870323', '航测遥感中心', 7718.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1545, '1648881415047870291', '实际结算总金额', 7114.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1546, '1648881415047870414', '结算费用合计', 477000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1547, '1648881415047870414', '实际结算总金额', 477000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1548, '1648881415047870283', '结算费用合计', 104224.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1549, '1648881415047870283', '工程监测中心质保金', 10422.45, '暂扣10%', '0');
INSERT INTO `cmc_settle_summary` VALUES (1550, '1648881415047870283', '工程监测中心', 93802.05, '结算金额90%', '1');
INSERT INTO `cmc_settle_summary` VALUES (1551, '1648881415047870323', '激光技术中心', 7192.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1552, '1648881415047870323', '测绘工程中心', 11104.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1553, '1648881415047870323', '实际结算总金额', 29441.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1554, '1648881415047870393', '台班费', 0.00, '现场未使用公司车辆', '0');
INSERT INTO `cmc_settle_summary` VALUES (1555, '1648881415047870308', '测绘工程中心', 134779.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1556, '1648881415047870376', '结算费用合计', 15000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1557, '1648881415047870393', '航测遥感中心', 470.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1558, '1648881415047870393', '双江口测量中心', 4250.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1559, '1648881415047870393', '测绘工程中心', 7000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1560, '1648881415047870393', '实际结算总金额', 11720.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1561, '1648881415047870433', '结算费用合计', 10080.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1562, '1648881415047870308', '测绘工程中心质保金', 15335.40, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1563, '1648881415047870308', '航测遥感中心', 63273.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1564, '1648881415047870308', '航测遥感中心质保金', 7030.40, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1565, '1648881415047870308', '实际结算总金额', 198052.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1566, '1648881415047870408', '结算费用合计', 11857.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1567, '1648881415047870433', '台班费', 0.00, '现场使用川A 6106T车辆3天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1568, '1648881415047870433', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1569, '1648881415047870433', '测绘工程中心', 10080.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1570, '1648881415047870283', '实际结算总金额', 93802.05, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1571, '1648881415047870270', '结算费用合计', 237011.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1572, '1648881415047870270', '工程监测中心质保金', 23701.15, '暂扣10%', '0');
INSERT INTO `cmc_settle_summary` VALUES (1573, '1648881415047870393', '结算费用合计', 11720.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1574, '1648881415047870433', '实际结算总金额', 10080.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1575, '1648881415047870408', '测绘工程中心质保金', 1185.70, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1576, '1648881415047870376', '台班费', 0.00, '现场使用公司车辆3天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1577, '1648881415047870411', '激光技术中心', 27520.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1578, '1648881415047870408', '测绘工程中心', 10671.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1579, '1648881415047870270', '工程监测中心', 213310.35, '结算金额90%', '1');
INSERT INTO `cmc_settle_summary` VALUES (1580, '1648881415047870270', '实际结算总金额', 213310.35, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1581, '1648881415047870408', '实际结算总金额', 10671.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1582, '1648881415047870241', '结算费用合计', 22535.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1583, '1648881415047870241', '测绘工程中心质保金', 1500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1584, '1648881415047870241', '航测遥感中心质保金', 660.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1585, '1648881415047870241', '测绘工程中心', 13777.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1586, '1648881415047870337', '结算费用合计', 6000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1587, '1648881415047870337', '测绘工程中心', 6000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1588, '1648881415047870337', '实际结算总金额', 6000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1589, '1648881415047870315', '结算费用合计', 94866.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1590, '1648881415047870392', '结算费用合计', 3852.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1591, '1648881415047870392', '台班费', 0.00, '现场使用川A 6106T车辆2天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1592, '1648881415047870392', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1593, '1648881415047870392', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1594, '1648881415047870234', '结算费用合计', 11112.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1595, '1648881415047870234', '地理信息中心质保金', 970.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1596, '1648881415047870392', '航测遥感中心', 400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1597, '1648881415047870234', '地理信息中心', 10142.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1598, '1648881415047870234', '实际结算总金额', 10142.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1599, '1648881415047870281', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1600, '1648881415047870281', '项目管理部质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1601, '1648881415047870281', '项目管理部', 17286.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1602, '1648881415047870281', '实际结算总金额', 17286.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1603, '1648881415047870315', '台班费', 8100.00, '45天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1604, '1648881415047870315', '测绘工程中心', 71039.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1605, '1648881415047870315', '测绘工程中心质保金', 10692.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1606, '1648881415047870374', '结算费用合计', 11542.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1607, '1648881415047870374', '台班费', 0.00, '现场使用川A.2239Q车辆3天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1608, '1648881415047870315', '航测遥感中心', 5035.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1609, '1648881415047870315', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1610, '1648881415047870315', '实际结算总金额', 76074.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1611, '1648881415047870426', '激光技术中心', 4200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1612, '1648881415047870426', '实际结算总金额', 4200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1613, '1648881415047870392', '测绘工程中心', 3452.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1614, '1648881415047870392', '实际结算总金额', 3852.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1615, '1648881415047870450', '结算费用合计', 583910.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1616, '1648881415047870450', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1617, '1648881415047870450', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1618, '1648881415047870450', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1619, '1648881415047870450', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1620, '1648881415047870450', '实际结算总金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1621, '1648881415047870426', '结算费用合计', 4200.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1622, '1648881415047870374', '航测遥感中心质保金', 300.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1623, '1648881415047870374', '航测遥感中心', 500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1624, '1648881415047870374', '测绘工程中心质保金', 3426.80, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1625, '1648881415047870374', '测绘工程中心', 7315.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1626, '1648881415047870374', '实际结算总金额', 10742.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1627, '1648881415047870221', '双江口测量中心', 587200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1628, '1648881415047870221', '测绘工程中心质保金', 58000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1629, '1648881415047870221', '双江口测量中心', 529200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1630, '1648881415047870252', '汽车台班费', 34380.00, '使用公司车辆191天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1631, '1648881415047870252', '航测遥感中心质保金', 3000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1632, '1648881415047870252', '测绘工程中心质保金', 45000.00, '含地理信息中心航飞质保金', '0');
INSERT INTO `cmc_settle_summary` VALUES (1633, '1648881415047870252', '地理信息中心', 2457.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1634, '1648881415047870252', '航测遥感中心', 31047.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1635, '1648881415047870252', '测绘工程中心', 426713.80, '含地理信息中心航飞结算费用', '1');
INSERT INTO `cmc_settle_summary` VALUES (1636, '1648881415047870252', '实际结算总金额', 460218.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1637, '1648881415047870252', '结算费用合计', 542598.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1638, '1648881415047870356', '结算费用合计', 22716.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1639, '1648881415047870356', '台班费', 1800.00, '现场使用川A.2239Q车辆10天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1640, '1648881415047870351', '台班费', 900.00, '现场使用川A.1081W车辆5天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1641, '1648881415047870351', '航测遥感中心质保金', 180.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1642, '1648881415047870351', '测绘工程中心质保金', 1280.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1643, '1648881415047870351', '航测遥感中心', 1708.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1644, '1648881415047870351', '测绘工程中心', 14493.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1645, '1648881415047870351', '实际结算总金额', 16202.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1646, '1648881415047870395', '结算费用合计', 141969.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1647, '1648881415047870395', '台班费', 4500.00, '现场使用川A1081W15天，租车10天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1648, '1648881415047870395', '航测遥感中心质保金', 3000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1649, '1648881415047870395', '测绘工程中心质保金', 7600.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1650, '1648881415047870395', '航测遥感中心', 27241.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1651, '1648881415047870395', '测绘工程中心', 99627.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1652, '1648881415047870395', '实际结算总金额', 126869.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1653, '1648881415047870356', '航测遥感中心质保金', 500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1654, '1648881415047870356', '测绘工程中心质保金', 1250.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1655, '1648881415047870356', '航测遥感中心', 5478.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1656, '1648881415047870356', '测绘工程中心', 13687.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1657, '1648881415047870356', '实际结算总金额', 19166.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1658, '1648881415047870431', '结算费用合计', 7376.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1659, '1648881415047870431', '台班费', 0.00, '现场使用川A 6106T车辆2天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1660, '1648881415047870431', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1661, '1648881415047870431', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1662, '1648881415047870431', '航测遥感中心', 1313.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1663, '1648881415047870431', '测绘工程中心', 6063.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1664, '1648881415047870431', '实际结算总金额', 7376.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1665, '1648881415047870387', '台班费', 86580.00, '公司自有车辆使用97天、项目累计租车384天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1666, '1648881415047870351', '结算费用合计', 18562.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1667, '1648881415047870387', '测绘工程中心质保金', 237779.80, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1668, '1648881415047870387', '航测遥感中心质保金', 95752.90, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1669, '1648881415047870387', '激光技术中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1670, '1648881415047870387', '地理信息中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1671, '1648881415047870387', '测绘工程中心', 2053438.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1672, '1648881415047870387', '结算费用合计', 3630673.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1673, '1648881415047870387', '航测遥感中心', 861776.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1674, '1648881415047870387', '激光技术中心', 287786.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1675, '1648881415047870387', '地理信息中心', 7560.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1676, '1648881415047870387', '实际结算总金额', 3210560.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1677, '1648881415047870312', '结算费用合计', 29363.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1678, '1648881415047870312', '台班费', 2160.00, '12天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (1679, '1648881415047870312', '测绘工程中心质保金', 1300.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1680, '1648881415047870312', '航测遥感中心质保金', 800.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1681, '1648881415047870221', '实际结算总金额', 529200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1682, '1648881415047870406', '台班费', 2340.00, '现场使用车辆13天，康科伟驾驶', '0');
INSERT INTO `cmc_settle_summary` VALUES (1683, '1648881415047870406', '测绘工程中心质保金', 3800.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1684, '1648881415047870406', '测绘工程中心', 36467.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1685, '1648881415047870312', '地理信息中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1686, '1648881415047870406', '实际结算总金额', 36467.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1687, '1648881415047870314', '结算费用合计', 3290.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1688, '1648881415047870314', '台班费', 360.00, '2天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (1689, '1648881415047870312', '测绘工程中心', 15554.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1690, '1648881415047870314', '测绘工程中心', 2930.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1691, '1648881415047870314', '实际结算总金额', 2930.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1692, '1648881415047870363', '结算费用合计', 57755.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1693, '1648881415047870312', '航测遥感中心', 7993.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1694, '1648881415047870312', '地理信息中心', 1555.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1695, '1648881415047870312', '实际结算总金额', 25103.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1696, '1648881415047870263', '结算费用合计', 87783.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1697, '1648881415047870263', '台班费', 2520.00, '14天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1698, '1648881415047870263', '测绘工程中心质保金', 5500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1699, '1648881415047870263', '航测遥感中心质保金', 1000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1700, '1648881415047870263', '测绘工程中心', 68021.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1701, '1648881415047870263', '航测遥感中心', 10741.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1702, '1648881415047870263', '实际结算总金额', 78763.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1703, '1648881415047870406', '结算费用合计', 43399.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1704, '1648881415047870363', '台班费', 2700.00, '15天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (1705, '1648881415047870363', '测绘工程中心', 39319.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1706, '1648881415047870363', '测绘工程中心质保金', 4668.80, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1707, '1648881415047870363', '航测遥感中心', 9960.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1708, '1648881415047870413', '实际结算总金额', 520042.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1709, '1648881415047870438', '结算费用合计', 42100.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1710, '1648881415047870438', '两河口测量中心', 42100.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1711, '1648881415047870438', '实际结算总金额', 42100.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1712, '1648881415047870277', '结算费用合计', 2010.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1713, '1648881415047870363', '航测遥感中心质保金', 1106.80, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1714, '1648881415047870277', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1715, '1648881415047870277', '航测遥感中心', 2010.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1716, '1648881415047870277', '实际结算总金额', 2010.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1717, '1648881415047870354', '结算费用合计', 40289.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1718, '1648881415047870354', '台班费', 1800.00, '现场使用川A 6106T车辆10天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1719, '1648881415047870354', '航测遥感中心质保金', 250.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1720, '1648881415047870354', '测绘工程中心质保金', 3350.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1721, '1648881415047870354', '航测遥感中心', 2282.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1722, '1648881415047870354', '测绘工程中心', 32607.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1723, '1648881415047870354', '实际结算总金额', 34889.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1724, '1648881415047870413', '结算费用合计', 520042.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1725, '1648881415047870375', '结算费用合计', 23840.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1726, '1648881415047870375', '台班费', 0.00, '现场使用川A 9802U车辆1天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1727, '1648881415047870375', '航测遥感中心质保金', 900.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1728, '1648881415047870375', '测绘工程中心质保金', 1150.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1729, '1648881415047870375', '航测遥感中心', 9117.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1730, '1648881415047870375', '测绘工程中心', 12673.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1731, '1648881415047870375', '实际结算总金额', 21790.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1732, '1648881415047870363', '实际结算总金额', 49279.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1733, '1648881415047870278', '结算费用合计', 19368.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1734, '1648881415047870239', '结算费用合计', 4500.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1735, '1648881415047870278', '项目管理部质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1736, '1648881415047870278', '航测遥感中心质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1737, '1648881415047870278', '外业结算金额', 14963.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1738, '1648881415047870278', '内业结算金额', 4405.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1739, '1648881415047870278', '实际结算总金额', 19368.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1740, '1648881415047870239', '外业结算金额', 3000.00, '廖绍毅', '1');
INSERT INTO `cmc_settle_summary` VALUES (1741, '1648881415047870239', '航测遥感中心', 1500.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1742, '1648881415047870239', '实际结算总金额', 3900.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1743, '1648881415047870355', '台班费', 1260.00, '现场租车7天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1744, '1648881415047870355', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1745, '1648881415047870355', '测绘工程中心质保金', 650.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1746, '1648881415047870355', '航测遥感中心质保金', 1833.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1747, '1648881415047870355', '测绘工程中心', 15010.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1748, '1648881415047870238', '结算费用合计', 13112.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1749, '1648881415047870238', '测绘工程中心', 9606.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1750, '1648881415047870238', '航测遥感中心', 3506.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1751, '1648881415047870238', '实际结算总金额', 13112.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1752, '1648881415047870260', '工程监测中心质保金', 11869.40, '10%质保金', '0');
INSERT INTO `cmc_settle_summary` VALUES (1753, '1648881415047870355', '实际结算总金额', 16843.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1754, '1648881415047870260', '结算费用合计', 118694.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1755, '1648881415047870260', '工程监测中心', 106825.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1756, '1648881415047870260', '实际结算总金额', 106825.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1757, '1648881415047870301', '台班费', 1080.00, '6天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (1758, '1648881415047870341', '金川测量中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1759, '1648881415047870355', '结算费用合计', 18753.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1760, '1648881415047870341', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1761, '1648881415047870341', '结算费用合计', 2880.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1762, '1648881415047870341', '金川测量中心', 2400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1763, '1648881415047870409', '实际结算总金额', 587200.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1764, '1648881415047870301', '测绘工程中心', 10430.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1765, '1648881415047870442', '台班费', 2880.00, '现场使用公司车辆16天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1766, '1648881415047870341', '测绘工程中心', 480.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1767, '1648881415047870341', '实际结算总金额', 2880.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1768, '1648881415047870232', '结算费用合计', 44855.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1769, '1648881415047870232', '外业质保金', 3000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1770, '1648881415047870232', '内业质保金', 910.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1771, '1648881415047870232', '外业结算金额', 32755.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1772, '1648881415047870232', '内业结算金额', 8190.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1773, '1648881415047870232', '台班费', 0.00, '第一次激光飞行公司派车3天，第二次杨振部门补测，公司派车3天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1774, '1648881415047870232', '实际结算总金额', 40945.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1775, '1648881415047870442', '测绘工程中心质保金', 5000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1776, '1648881415047870442', '测绘工程中心', 43920.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1777, '1648881415047870405', '结算费用合计', 2638.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1778, '1648881415047870442', '实际结算总金额', 43920.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1779, '1648881415047870405', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1780, '1648881415047870405', '航测遥感中心', 2638.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1781, '1648881415047870405', '实际结算总金额', 2638.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1782, '1648881415047870409', '结算费用合计', 587200.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1783, '1648881415047870301', '实际结算总金额', 10430.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1784, '1648881415047870245', '结算费用合计', 321437.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1785, '1648881415047870245', '工程监测中心质保金', 32143.78, '暂扣10%', '0');
INSERT INTO `cmc_settle_summary` VALUES (1786, '1648881415047870318', '结算费用合计', 104217.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1787, '1648881415047870318', '台班费', 3780.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1788, '1648881415047870318', '测绘工程中心', 66885.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1789, '1648881415047870318', '激光技术中心', 6566.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1790, '1648881415047870318', '航测遥感中心', 26985.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1791, '1648881415047870318', '实际结算总金额', 100437.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1792, '1648881415047870325', '实际结算总金额', 3906.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1793, '1648881415047870373', '结算费用合计', 20058.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1794, '1648881415047870373', '台班费', 1080.00, '现场使用车辆6天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1795, '1648881415047870227', '激光技术中心质保金', 700.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1796, '1648881415047870227', '激光技术中心', 6727.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1797, '1648881415047870227', '实际结算总金额', 6727.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1798, '1648881415047870253', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1799, '1648881415047870253', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1800, '1648881415047870253', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1801, '1648881415047870253', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1802, '1648881415047870227', '结算费用合计', 7426.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1803, '1648881415047870253', '实际结算总金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1804, '1648881415047870258', '工程监测中心质保金', 168986.49, '暂扣10%质保金', '0');
INSERT INTO `cmc_settle_summary` VALUES (1805, '1648881415047870253', '结算费用合计', 3668.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1806, '1648881415047870250', '汽车台班费', 0.00, '外业按人天结算，不扣台班费', '0');
INSERT INTO `cmc_settle_summary` VALUES (1807, '1648881415047870258', '工程监测中心', 1520878.39, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1808, '1648881415047870258', '实际结算总金额', 1520878.39, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1809, '1648881415047870191', '结算费用合计', 113477.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1810, '1648881415047870191', '台班费', 1800.00, '测绘工程中心', '0');
INSERT INTO `cmc_settle_summary` VALUES (1811, '1648881415047870258', '结算费用合计', 1689864.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1812, '1648881415047870191', '测绘工程中心质保金', 5300.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1813, '1648881415047870164', '测绘工程中心质保金', 1660.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1814, '1648881415047870164', '测绘工程中心', 26357.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1815, '1648881415047870164', '航测遥感中心', 714.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1816, '1648881415047870164', '实际结算总金额', 27071.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1817, '1648881415047870085', '测绘工程中心质保金', 18000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1818, '1648881415047870085', '测绘工程中心', 167745.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1819, '1648881415047870188', '汽车台班费', 2160.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1820, '1648881415047870188', '地理信息中心质保金', 1400.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1821, '1648881415047870188', '测绘工程中心质保金', 1000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1822, '1648881415047870188', '台班费', 1080.00, '使用车辆川A9802U，不含进出场及培训用车6天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1823, '1648881415047870200', '结算费用合计', 80269.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1824, '1648881415047870200', '空域申请费用', 21000.00, '空域申请费用由项目借款支付', '1');
INSERT INTO `cmc_settle_summary` VALUES (1825, '1648881415047870200', '测绘工程中心质保金', 2753.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1826, '1648881415047870200', '地理信息中心质保金', 3083.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1827, '1648881415047870200', '汽车台班费', 900.00, '外业集中刺像控检查点使用车辆5天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1828, '1648881415047870200', '测绘工程中心', 24778.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1829, '1648881415047870200', '地理信息中心', 27754.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1830, '1648881415047870200', '实际结算总金额', 73533.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1831, '1648881415047870177', '结算费用合计', 517600.70, '实际进场及合同生效结算时间为2020年12月1日，结算周期为13个月。', '2');
INSERT INTO `cmc_settle_summary` VALUES (1832, '1648881415047870177', '巴拉测量中心', 517600.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1833, '1648881415047870177', '实际结算总金额', 517600.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1834, '1648881415047870191', '激光技术中心质保金', 840.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1835, '1648881415047870250', '结算费用合计', 28226.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1836, '1648881415047870250', '地理信息中心质保金', 200.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1837, '1648881415047870250', '测绘工程中心质保金', 1500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1838, '1648881415047870250', '航测遥感中心结算金额', 822.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1839, '1648881415047870250', '地理信息中心结算', 1800.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1840, '1648881415047870218', '结算费用合计', 23840.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1841, '1648881415047870218', '双江口测量中心质保金', 1400.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1842, '1648881415047870218', '双江口测量中心', 22440.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1843, '1648881415047870218', '实际结算总金额', 22440.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1844, '1648881415047870250', '测绘工程中心结算金额', 23904.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1845, '1648881415047870250', '实际结算总金额', 26526.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1846, '1648881415047870085', '实际结算总金额', 167745.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1847, '1648881415047870188', '地理信息中心结算', 12705.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1848, '1648881415047870188', '测绘工程中心结算金额', 17607.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1849, '1648881415047870188', '实际结算总金额', 30312.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1850, '1648881415047870188', '结算费用合计', 33792.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1851, '1648881415047870115', '结算费用合计', 1980.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1852, '1648881415047870115', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1853, '1648881415047870115', '测绘工程中心', 1980.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1854, '1648881415047870115', '实际结算总金额', 1980.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1855, '1648881415047870164', '结算费用合计', 28731.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1856, '1648881415047870191', '航测遥感中心质保金', 3400.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1857, '1648881415047870191', '测绘工程中心', 52812.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1858, '1648881415047870191', '激光技术中心', 18060.00, '含空域办理', '1');
INSERT INTO `cmc_settle_summary` VALUES (1859, '1648881415047870191', '航测遥感中心', 31265.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1860, '1648881415047870191', '实际结算总金额', 102137.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1861, '1648881415047870254', '结算费用合计', 1068373.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1862, '1648881415047870254', '工程监测中心质保金', 100000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1863, '1648881415047870254', '测绘工程中心', 968373.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1864, '1648881415047870254', '实际结算总金额', 968373.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1865, '1648881415047870085', '结算费用合计', 185745.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1866, '1648881415047870186', '结算费用合计', 23800.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1867, '1648881415047870186', '项目管理部', 23800.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1868, '1648881415047870186', '项目管理部质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1869, '1648881415047870186', '结算费用合计', 23800.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1870, '1648881415047870266', '激光技术中心', 38175.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1871, '1648881415047870266', '激光技术中心质保金', 4200.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1872, '1648881415047870266', '航测遥感中心', 3789.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1873, '1648881415047870266', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1874, '1648881415047870266', '实际结算总金额', 41964.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1875, '1648881415047870266', '结算费用合计', 46164.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1876, '1648881415047870307', '结算费用合计', 6704.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1877, '1648881415047870307', '测绘工程中心', 5908.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1878, '1648881415047870307', '航测遥感中心', 796.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1879, '1648881415047870307', '实际结算总金额', 6704.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1880, '1648881415047870336', '实际结算总金额', 86244.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1881, '1648881415047870285', '结算费用合计', 56008.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1882, '1648881415047870285', '台班费', 2340.00, '13个台班', '0');
INSERT INTO `cmc_settle_summary` VALUES (1883, '1648881415047870285', '工程监测中心', 53668.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1884, '1648881415047870285', '实际结算总金额', 53668.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1885, '1648881415047870169', '汽车台班费', 540.00, '使用车辆川A 1686T，共计3天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1886, '1648881415047870169', '测绘工程中心质保金', 1581.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1887, '1648881415047870257', '委外费用', 85000.00, '委外合同支付', '1');
INSERT INTO `cmc_settle_summary` VALUES (1888, '1648881415047870257', '测绘工程中心', 3659.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1889, '1648881415047870257', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1890, '1648881415047870257', '实际结算总金额', 3659.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1891, '1648881415047870304', '结算费用合计', 6037.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1892, '1648881415047870169', '地理信息中心', 2000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1893, '1648881415047870257', '结算费用合计', 3659.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1894, '1648881415047870169', '测绘工程中心', 14889.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1895, '1648881415047870169', '实际结算总金额', 16689.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1896, '1648881415047870107', '结算费用合计', 441559.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1897, '1648881415047870157', '航测遥感中心', 20240.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1898, '1648881415047870107', '航测遥感中心质保金', 2256.76, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1899, '1648881415047870107', '测绘工程中心质保金', 39071.06, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1900, '1648881415047870107', '航测遥感中心', 20310.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1901, '1648881415047870107', '测绘工程中心', 379920.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1902, '1648881415047870107', '实际结算总金额', 400231.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1903, '1648881415047870215', '结算费用合计', 2580.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1904, '1648881415047870215', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1905, '1648881415047870215', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1906, '1648881415047870215', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1907, '1648881415047870210', '测绘工程中心质保金', 8295.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1908, '1648881415047870210', '航测遥感中心质保金', 2039.20, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1909, '1648881415047870210', '测绘工程中心', 74654.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1910, '1648881415047870210', '航测遥感中心', 18352.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1911, '1648881415047870210', '实际结算总金额', 93007.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1912, '1648881415047870215', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1913, '1648881415047870304', '两河口测量中心', 4917.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1914, '1648881415047870304', '地理信息中心', 1119.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1915, '1648881415047870215', '实际结算总金额', 2580.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1916, '1648881415047870169', '结算费用合计', 19010.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1917, '1648881415047870157', '测绘工程中心', 127125.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1918, '1648881415047870157', '实际结算总金额', 149045.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1919, '1648881415047870373', '航测遥感中心质保金', 300.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1920, '1648881415047870228', '结算费用合计', 151514.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1921, '1648881415047870228', '台班费', 3420.00, '19天', '0');
INSERT INTO `cmc_settle_summary` VALUES (1922, '1648881415047870228', '测绘工程中心质保金', 9498.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1923, '1648881415047870228', '航测遥感中心质保金', 5653.40, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1924, '1648881415047870228', '测绘工程中心', 82062.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1925, '1648881415047870228', '航测遥感中心', 50880.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1926, '1648881415047870228', '实际结算总金额', 132943.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1927, '1648881415047870210', '结算费用合计', 103341.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1928, '1648881415047870373', '测绘工程中心质保金', 1250.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1929, '1648881415047870373', '航测遥感中心', 2727.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1930, '1648881415047870373', '测绘工程中心', 14701.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1931, '1648881415047870373', '实际结算总金额', 17428.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1932, '1648881415047870201', '实际结算总金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1933, '1648881415047870304', '台班费', 0.00, '进出场加外业共3天，不计台班费', '0');
INSERT INTO `cmc_settle_summary` VALUES (1934, '1648881415047870176', '测绘工程中心质保金', 1011.30, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1935, '1648881415047870176', '测绘工程中心', 9101.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1936, '1648881415047870176', '双江口测量中心', 1106.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1937, '1648881415047870176', '航测遥感中心', 1911.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1938, '1648881415047870176', '实际结算总金额', 12120.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1939, '1648881415047870230', '结算费用合计', 19411.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1940, '1648881415047870183', '结算费用合计', 125735.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1941, '1648881415047870183', '激光技术中心', 72795.00, '含租车、空域申请费用', '1');
INSERT INTO `cmc_settle_summary` VALUES (1942, '1648881415047870183', '激光技术中心质保金', 3300.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1943, '1648881415047870183', '地理信息中心', 49280.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1944, '1648881415047870183', '地理信息中心质保金', 4900.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1945, '1648881415047870183', '实际结算总金额', 117535.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1946, '1648881415047870176', '结算费用合计', 13131.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1947, '1648881415047870230', '激光技术中心质保金', 1900.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1948, '1648881415047870230', '激光技术中心', 17511.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1949, '1648881415047870230', '实际结算总金额', 17511.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1950, '1648881415047870247', '测绘工程中心质保金', 257.50, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1951, '1648881415047870247', '激光技术中心质保金', 945.80, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1952, '1648881415047870247', '航测遥感中心质保金', 566.30, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1953, '1648881415047870321', '实际结算总金额', 3300.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1954, '1648881415047870247', '测绘工程中心', 2317.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1955, '1648881415047870247', '激光技术中心', 8512.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1956, '1648881415047870247', '航测遥感中心', 5096.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1957, '1648881415047870247', '实际结算总金额', 15927.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1958, '1648881415047870427', '航测遥感中心', 34345.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1959, '1648881415047870247', '结算费用合计', 17696.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1960, '1648881415047870427', '航测遥感中心质保金', 4000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1961, '1648881415047870427', '激光技术中心', 148997.40, '含王明阳费用', '1');
INSERT INTO `cmc_settle_summary` VALUES (1962, '1648881415047870321', '结算费用合计', 3300.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1963, '1648881415047870427', '激光技术中心质保金', 16000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1964, '1648881415047870427', '实际结算总金额', 183342.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1965, '1648881415047870396', '工程监测中心质保金', 11562.00, '10%质保金', '0');
INSERT INTO `cmc_settle_summary` VALUES (1966, '1648881415047870286', '外业结算金额', 4140.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1967, '1648881415047870286', '内业结算金额', 400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1968, '1648881415047870396', '工程监测中心', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1969, '1648881415047870427', '结算费用合计', 203342.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1970, '1648881415047870396', '实际结算总金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1971, '1648881415047870365', '工程监测中心质保金', 11260.00, '10%质保金', '0');
INSERT INTO `cmc_settle_summary` VALUES (1972, '1648881415047870365', '工程监测中心', 101340.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1973, '1648881415047870365', '实际结算总金额', 101340.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1974, '1648881415047870303', '实际结算总金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1975, '1648881415047870428', '结算费用合计', 5073.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1976, '1648881415047870310', '结算费用合计', 2000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1977, '1648881415047870310', '实际结算总金额', 2000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1978, '1648881415047870286', '实际结算总金额', 4540.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1979, '1648881415047870372', '航测遥感中心质保金', 4033.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1980, '1648881415047870372', '激光技术中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1981, '1648881415047870372', '航测遥感中心', 40331.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1982, '1648881415047870372', '激光技术中心', 486.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1983, '1648881415047870309', '结算费用合计', 7858.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1984, '1648881415047870396', '结算费用合计', 115620.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1985, '1648881415047870372', '结算费用合计', 45137.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1986, '1648881415047870372', '台班费', 3240.00, '车辆台班18', '0');
INSERT INTO `cmc_settle_summary` VALUES (1987, '1648881415047870372', '其他外业', 1080.00, '子公司已按配合结算5个人天；', '0');
INSERT INTO `cmc_settle_summary` VALUES (1988, '1648881415047870372', '实际结算总金额', 36784.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1989, '1648881415047870365', '结算费用合计', 112600.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1990, '1648881415047870428', '激光技术中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1991, '1648881415047870286', '结算费用合计', 4540.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1992, '1648881415047870428', '激光技术中心', 5073.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1993, '1648881415047870309', '实际结算总金额', 7858.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1994, '1648881415047870428', '实际结算总金额', 5073.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (1995, '1648881415047870303', '结算费用合计', 0.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1996, '1648881415047870291', '结算费用合计', 7114.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (1997, '1648881415047870291', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1998, '1648881415047870291', '金川测量中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (1999, '1648881415047870192', '汽车台班费', 2520.00, '使用车辆川A 9802U，共计14天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2000, '1648881415047870192', '结算费用合计', 65663.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2001, '1648881415047870192', '航测遥感中心质保金', 1774.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2002, '1648881415047870192', '测绘工程中心质保金', 3200.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2003, '1648881415047870192', '航测遥感中心结算金额', 15962.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2004, '1648881415047870235', '结算费用合计', 371162.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2005, '1648881415047870192', '测绘工程中心结算金额', 42207.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2006, '1648881415047870235', '测绘工程中心', 319905.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2007, '1648881415047870235', '测绘工程中心质保金', 14750.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2008, '1648881415047870235', '汽车台班费', 3420.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2009, '1648881415047870235', '航测遥感中心', 51257.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2010, '1648881415047870235', '航测遥感中心质保金', 5000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2011, '1648881415047870235', '实际结算总金额', 347992.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2012, '1648881415047870192', '实际结算总金额', 58169.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2013, '1648881415047870357', '台班费', 1260.00, '现场使用川A1081W车辆7天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2014, '1648881415047870357', '航测遥感中心质保金', 1000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2015, '1648881415047870357', '测绘工程中心质保金', 3000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2016, '1648881415047870357', '航测遥感中心', 9338.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2017, '1648881415047870357', '测绘工程中心', 40990.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2018, '1648881415047870360', '实际结算总金额', 32412.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2019, '1648881415047870357', '结算费用合计', 55589.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2020, '1648881415047870357', '实际结算总金额', 50329.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2021, '1648881415047870366', '结算费用合计', 14933.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2022, '1648881415047870366', '台班费', 900.00, '现场使用川A 1950R车辆5天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2023, '1648881415047870366', '航测遥感中心质保金', 500.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2024, '1648881415047870366', '测绘工程中心质保金', 600.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2025, '1648881415047870419', '结算费用合计', 26108.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2026, '1648881415047870335', '结算费用合计', 34788.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2027, '1648881415047870292', '项目管理费', 46074.00, '3%', '1');
INSERT INTO `cmc_settle_summary` VALUES (2028, '1648881415047870360', '测绘工程中心', 31951.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2029, '1648881415047870292', '结算费用合计', 92148.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2030, '1648881415047870295', '经营奖励', 21190.00, '3%', '1');
INSERT INTO `cmc_settle_summary` VALUES (2031, '1648881415047870295', '项目管理费', 21190.00, '3%', '1');
INSERT INTO `cmc_settle_summary` VALUES (2032, '1648881415047870295', '其他外业', 72100.00, '2023年春节前开支', '1');
INSERT INTO `cmc_settle_summary` VALUES (2033, '1648881415047870292', '经营奖励', 46074.00, '3%', '1');
INSERT INTO `cmc_settle_summary` VALUES (2034, '1648881415047870366', '航测遥感中心', 4588.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2035, '1648881415047870324', '台班费', 720.00, '现场用车4天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2036, '1648881415047870366', '测绘工程中心', 8333.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2037, '1648881415047870366', '实际结算总金额', 12933.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2038, '1648881415047870419', '台班费', 1620.00, '现场只用车辆川A 1081W 9天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2039, '1648881415047870419', '航测遥感中心质保金', 360.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2040, '1648881415047870419', '测绘工程中心质保金', 1350.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2041, '1648881415047870324', '航测遥感中心质保金', 300.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2042, '1648881415047870324', '测绘工程中心质保金', 850.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2043, '1648881415047870324', '航测遥感中心', 2737.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2044, '1648881415047870324', '测绘工程中心', 23311.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2045, '1648881415047870324', '实际结算总金额', 26048.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2046, '1648881415047870419', '航测遥感中心', 3289.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2047, '1648881415047870316', '结算费用合计', 5400.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2048, '1648881415047870419', '激光技术中心', 4800.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2049, '1648881415047870419', '测绘工程中心', 14689.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2050, '1648881415047870419', '实际结算总金额', 22778.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2051, '1648881415047870324', '结算费用合计', 27918.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2052, '1648881415047870316', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2053, '1648881415047870316', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2054, '1648881415047870316', '测绘工程中心', 5400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2055, '1648881415047870316', '实际结算总金额', 5400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2056, '1648881415047870382', '结算费用合计', 36600.00, '按工作量为25778.10元', '2');
INSERT INTO `cmc_settle_summary` VALUES (2057, '1648881415047870335', '实际结算总金额', 34788.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2058, '1648881415047870295', '结算费用合计', 114480.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2059, '1648881415047870295', '实际结算总金额', 114480.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2060, '1648881415047870296', '测绘工程中心', 2753.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2061, '1648881415047870296', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2062, '1648881415047870296', '实际结算总金额', 2753.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2063, '1648881415047870296', '结算费用合计', 2753.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2064, '1648881415047870119', '台班费', 360.00, '2天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2065, '1648881415047870119', '测绘工程中心质保金', 1206.50, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2066, '1648881415047870119', '地理信息中心质保金', 505.40, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2067, '1648881415047870119', '测绘工程中心', 10498.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2068, '1648881415047870119', '地理信息中心', 4549.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2069, '1648881415047870098', '结算费用合计', 1380.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2070, '1648881415047870119', '结算费用合计', 17119.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2071, '1648881415047870098', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2072, '1648881415047870098', '测绘工程中心', 1380.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2073, '1648881415047870098', '实际结算总金额', 1380.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2074, '1648881415047870345', '结算费用合计', 26400.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2075, '1648881415047870345', '测绘工程中心质保金', 2640.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2076, '1648881415047870119', '实际结算总金额', 15047.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2077, '1648881415047870345', '测绘工程中心', 23760.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2078, '1648881415047870345', '实际结算总金额', 23760.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2079, '1648881415047870367', '台班费', 2160.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2080, '1648881415047870336', '结算费用合计', 110527.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2081, '1648881415047870367', '测绘工程中心', 35855.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2082, '1648881415047870367', '航测遥感中心', 10775.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2083, '1648881415047870367', '实际结算总金额', 46631.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2084, '1648881415047870336', '台班费', 3780.00, '21天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (2085, '1648881415047870401', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2086, '1648881415047870401', '实际结算总金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2087, '1648881415047870336', '测绘工程中心', 42919.30, '已扣减德方结算肖建光21天*450元=9450元', '1');
INSERT INTO `cmc_settle_summary` VALUES (2088, '1648881415047870336', '测绘工程中心质保金', 6238.80, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2089, '1648881415047870350', '结算费用合计', 14389.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2090, '1648881415047870451', '测绘工程中心质保金', 990.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2091, '1648881415047870451', '测绘工程中心', 8954.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2092, '1648881415047870451', '航测遥感中心', 257.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2093, '1648881415047870236', '实际结算总金额', 13921.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2094, '1648881415047870116', '结算费用合计', 14780.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2095, '1648881415047870116', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2096, '1648881415047870116', '项目管理部质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2097, '1648881415047870116', '项目管理部', 14780.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2098, '1648881415047870289', '结算费用合计', 200198.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2099, '1648881415047870420', '台班费', 3240.00, '第一次现场用车天，因疫情返回；二次进场现场用车7天，现场复核用车6天；', '0');
INSERT INTO `cmc_settle_summary` VALUES (2100, '1648881415047870420', '测绘工程中心质保金', 4850.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2101, '1648881415047870289', '测绘工程中心质保金', 20019.90, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2102, '1648881415047870420', '测绘工程中心', 43710.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2103, '1648881415047870377', '结算费用合计', 86537.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2104, '1648881415047870377', '台班费', 6120.00, '34天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2105, '1648881415047870377', '扣款', 4800.00, '一般质量责任事故，扣除项目土建结算款20%。', '0');
INSERT INTO `cmc_settle_summary` VALUES (2106, '1648881415047870420', '实际结算总金额', 43710.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2107, '1648881415047870377', '测绘工程中心', 75617.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2108, '1648881415047870116', '实际结算总金额', 14780.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2109, '1648881415047870289', '测绘工程中心', 180179.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2110, '1648881415047870289', '实际结算总金额', 180179.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2111, '1648881415047870390', '结算费用合计', 3744.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2112, '1648881415047870390', '台班费', 0.00, '数据采集不扣台班费', '0');
INSERT INTO `cmc_settle_summary` VALUES (2113, '1648881415047870390', '激光技术中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2114, '1648881415047870390', '激光技术中心', 3744.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2115, '1648881415047870390', '实际结算总金额', 3744.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2116, '1648881415047870377', '实际结算总金额', 75617.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2117, '1648881415047870420', '结算费用合计', 51800.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2118, '1648881415047870196', '结算费用合计', 54590.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2119, '1648881415047870196', '台班费', 0.00, '公司未安排车辆', '0');
INSERT INTO `cmc_settle_summary` VALUES (2120, '1648881415047870196', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2121, '1648881415047870196', '测绘工程中心', 54590.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2122, '1648881415047870196', '实际结算总金额', 54590.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2123, '1648881415047870371', '台班费', 0.00, '项目生产现场使用车辆3天，现场演练配合使用车辆7天，不扣除台班费）', '0');
INSERT INTO `cmc_settle_summary` VALUES (2124, '1648881415047870407', '两河口测量中心', 15857.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2125, '1648881415047870407', '航测遥感中心', 8803.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2126, '1648881415047870407', '实际结算总金额', 24660.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2127, '1648881415047870407', '结算费用合计', 24660.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2128, '1648881415047870439', '台班费', 1620.00, '9天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (2129, '1648881415047870439', '测绘工程中心', 31171.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2130, '1648881415047870439', '航测遥感中心', 7979.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2131, '1648881415047870439', '实际结算总金额', 39150.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2132, '1648881415047870371', '地理信息中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2133, '1648881415047870371', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2134, '1648881415047870371', '地理信息中心', 3032.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2135, '1648881415047870371', '测绘工程中心', 27807.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2136, '1648881415047870361', '台班费', 1800.00, '现场使用车辆川A 9802U 10天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2137, '1648881415047870361', '航测遥感中心质保金', 2200.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2138, '1648881415047870358', '结算费用合计', 57224.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2139, '1648881415047870358', '台班费', 3960.00, '配合测量阶段租车11天，界桩埋设阶段租车11天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2140, '1648881415047870358', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2141, '1648881415047870439', '结算费用合计', 40770.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2142, '1648881415047870446', '航测遥感中心质保金', 3085.70, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2143, '1648881415047870446', '激光技术中心质保金', 1030.40, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2144, '1648881415047870446', '测绘工程中心质保金', 3861.70, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2145, '1648881415047870371', '实际结算总金额', 30839.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2146, '1648881415047870288', '结算费用合计', 11869.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2147, '1648881415047870288', '台班费', 1440.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2148, '1648881415047870288', '测绘工程中心', 10429.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2149, '1648881415047870288', '实际结算总金额', 10429.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2150, '1648881415047870394', '结算费用合计', 37988.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2151, '1648881415047870394', '台班费', 900.00, '现场使用川A1081W车辆5天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2152, '1648881415047870394', '测绘工程中心质保金', 2300.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2153, '1648881415047870358', '测绘工程中心', 53264.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2154, '1648881415047870394', '测绘工程中心', 34788.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2155, '1648881415047870358', '实际结算总金额', 53264.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2156, '1648881415047870441', '结算费用合计', 42947.80, '地理信息中心、航测遥感中心共同完成', '2');
INSERT INTO `cmc_settle_summary` VALUES (2157, '1648881415047870441', '航测遥感中心质保金', 4294.80, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2158, '1648881415047870441', '内业结算金额', 38653.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2159, '1648881415047870441', '实际结算总金额', 38653.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2160, '1648881415047870370', '结算费用合计', 2880.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2161, '1648881415047870446', '航测遥感中心', 27771.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2162, '1648881415047870394', '实际结算总金额', 34788.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2163, '1648881415047870371', '结算费用合计', 30839.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2164, '1648881415047870370', '台班费', 0.00, '现场使用川A1081W这两1天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2165, '1648881415047870370', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2166, '1648881415047870370', '测绘工程中心', 2880.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2167, '1648881415047870370', '实际结算总金额', 2880.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2168, '1648881415047870446', '激光技术中心', 9274.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2169, '1648881415047870446', '测绘工程中心', 34755.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2170, '1648881415047870446', '实际结算总金额', 71800.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2171, '1648881415047870385', '结算费用合计', 24288.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2172, '1648881415047870385', '台班费', 900.00, '现场使用川A3760U车辆5天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2173, '1648881415047870385', '航测遥感中心质保金', 750.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2174, '1648881415047870445', '结算费用合计', 0.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2175, '1648881415047870445', '外业质保金', 0.00, '本项目已通过最终竣工审计，甲方已全部支付完毕，建议不在扣除质保金', '0');
INSERT INTO `cmc_settle_summary` VALUES (2176, '1648881415047870385', '测绘工程中心质保金', 1600.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2177, '1648881415047870385', '航测遥感中心', 4604.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2178, '1648881415047870385', '测绘工程中心', 16434.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2179, '1648881415047870385', '实际结算总金额', 21038.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2180, '1648881415047870446', '结算费用合计', 79778.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2181, '1648881415047870445', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2182, '1648881415047870361', '结算费用合计', 72411.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2183, '1648881415047870361', '激光技术中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2184, '1648881415047870361', '测绘工程中心质保金', 2705.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2185, '1648881415047870361', '航测遥感中心', 20204.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2186, '1648881415047870361', '激光技术中心', 21152.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2187, '1648881415047870361', '测绘工程中心', 24349.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2188, '1648881415047870361', '实际结算总金额', 66011.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2189, '1648881415047870422', '结算费用合计', 19410.40, '按工作量结算15771.00元', '2');
INSERT INTO `cmc_settle_summary` VALUES (2190, '1648881415047870422', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2191, '1648881415047870422', '航测遥感中心质保金', 420.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2192, '1648881415047870422', '测绘工程中心质保金', 800.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2193, '1648881415047870331', '结算费用合计', 38379.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2194, '1648881415047870331', '航测遥感中心质保金', 1350.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2195, '1648881415047870331', '测绘工程中心质保金', 2400.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2196, '1648881415047870422', '测绘工程中心', 14320.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2197, '1648881415047870422', '实际结算总金额', 18190.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2198, '1648881415047870331', '航测遥感中心', 12559.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2199, '1648881415047870449', '结算费用合计', 4920.00, '按工作量结算为4291.80元', '2');
INSERT INTO `cmc_settle_summary` VALUES (2200, '1648881415047870449', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2201, '1648881415047870331', '测绘工程中心', 22070.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2202, '1648881415047870327', '台班费', 6660.00, '37天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (2203, '1648881415047870327', '测绘工程中心', 74975.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2204, '1648881415047870327', '测绘工程中心质保金', 9070.60, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2205, '1648881415047870327', '激光技术中心', 35375.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2206, '1648881415047870302', '两河口测量中心', 17346.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2207, '1648881415047870302', '测绘工程中心', 2524.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2208, '1648881415047870302', '台班费', 0.00, '外业时间为：2021年11月27日至11月29日，共3天，因此不计车辆台班费', '0');
INSERT INTO `cmc_settle_summary` VALUES (2209, '1648881415047870302', '实际结算总金额', 19870.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2210, '1648881415047870404', '测绘工程中心', 4277.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2211, '1648881415047870447', '结算费用合计', 21882.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2212, '1648881415047870447', '台班费', 900.00, '现场使用川A18081W车辆5天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2213, '1648881415047870447', '航测遥感中心质保金', 300.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2214, '1648881415047870447', '测绘工程中心质保金', 1200.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2215, '1648881415047870447', '航测遥感中心', 2912.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2216, '1648881415047870447', '测绘工程中心', 16570.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2217, '1648881415047870447', '实际结算总金额', 19482.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2218, '1648881415047870333', '结算费用合计', 6646.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2219, '1648881415047870333', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2220, '1648881415047870333', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2221, '1648881415047870333', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2222, '1648881415047870333', '航测遥感中心', 1692.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2223, '1648881415047870333', '测绘工程中心', 4954.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2224, '1648881415047870333', '实际结算总金额', 6646.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2225, '1648881415047870327', '激光技术中心质保金', 3930.60, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2226, '1648881415047870327', '实际结算总金额', 110350.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2227, '1648881415047870404', '激光技术中心', 8576.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2228, '1648881415047870327', '结算费用合计', 130012.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2229, '1648881415047870404', '实际结算总金额', 12853.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2230, '1648881415047870297', '结算费用合计', 1990.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2231, '1648881415047870297', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2232, '1648881415047870297', '测绘工程中心', 1990.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2233, '1648881415047870404', '结算费用合计', 12853.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2234, '1648881415047870297', '实际结算总金额', 1990.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2235, '1648881415047870434', '结算费用合计', 37696.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2236, '1648881415047870449', '测绘工程中心', 4920.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2237, '1648881415047870331', '实际结算总金额', 34629.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2238, '1648881415047870343', '结算费用合计', 69083.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2239, '1648881415047870343', '台班费', 6120.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2240, '1648881415047870343', '测绘工程中心', 33471.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2241, '1648881415047870343', '测绘工程中心质保金', 4399.10, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2242, '1648881415047870343', '航测遥感中心', 8542.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2243, '1648881415047870343', '航测遥感中心质保金', 949.20, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2244, '1648881415047870343', '激光技术中心', 14040.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2245, '1648881415047870343', '激光技术中心质保金', 1560.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2246, '1648881415047870343', '实际结算总金额', 56054.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2247, '1648881415047870334', '结算费用合计', 1280.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2248, '1648881415047870334', '金川测量中心', 800.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2249, '1648881415047870334', '测绘工程中心', 480.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2250, '1648881415047870334', '实际结算总金额', 1280.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2251, '1648881415047870422', '航测遥感中心', 3870.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2252, '1648881415047870449', '实际结算总金额', 4920.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2253, '1648881415047870340', '结算费用合计', 52680.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2254, '1648881415047870340', '台班费', 3600.00, '20天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (2255, '1648881415047870340', '测绘工程中心质保金', 3444.60, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2256, '1648881415047870340', '航测遥感中心质保金', 1503.50, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2257, '1648881415047870340', '测绘工程中心', 30601.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2258, '1648881415047870340', '航测遥感中心', 13531.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2259, '1648881415047870340', '实际结算总金额', 44132.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2260, '1648881415047870379', '结算费用合计', 23374.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2261, '1648881415047870379', '台班费', 2160.00, '12天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (2262, '1648881415047870379', '测绘工程中心', 18877.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2263, '1648881415047870379', '测绘工程中心质保金', 2337.50, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2264, '1648881415047870379', '实际结算总金额', 18877.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2265, '1648881415047870362', '结算费用合计', 19425.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2266, '1648881415047870362', '台班费', 1620.00, '9天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (2267, '1648881415047870362', '测绘工程中心', 15863.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2268, '1648881415047870362', '测绘工程中心质保金', 1942.60, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2269, '1648881415047870302', '结算费用合计', 19870.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2270, '1648881415047870344', '结算费用合计', 10680.00, '按实际外业人天结算，按工作量结算8156.10元', '2');
INSERT INTO `cmc_settle_summary` VALUES (2271, '1648881415047870344', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2272, '1648881415047870344', '测绘工程中心', 10680.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2273, '1648881415047870344', '实际结算总金额', 10680.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2274, '1648881415047870330', '结算费用合计', 15291.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2275, '1648881415047870330', '测绘工程中心', 10085.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2276, '1648881415047870330', '测绘工程中心质保金', 1120.60, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2277, '1648881415047870411', '实际结算总金额', 27520.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2278, '1648881415047870300', '台班费', 2160.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2279, '1648881415047870300', '测绘工程中心', 24960.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2280, '1648881415047870300', '实际结算总金额', 24960.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2281, '1648881415047870383', '结算费用合计', 12516.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2282, '1648881415047870383', '台班费', 900.00, '现场使用公司车辆5天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2283, '1648881415047870362', '实际结算总金额', 15863.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2284, '1648881415047870330', '航测遥感中心', 1685.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2285, '1648881415047870330', '激光技术中心', 2400.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2286, '1648881415047870330', '实际结算总金额', 14171.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2287, '1648881415047870346', '结算费用合计', 7530.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2288, '1648881415047870346', '台班费', 1440.00, '8天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (2289, '1648881415047870346', '测绘工程中心', 3679.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2290, '1648881415047870346', '航测遥感中心', 899.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2291, '1648881415047870346', '激光技术中心', 1512.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2292, '1648881415047870391', '结算费用合计', 38386.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2293, '1648881415047870391', '实际结算总金额', 38386.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2294, '1648881415047870383', '测绘工程中心质保金', 570.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2295, '1648881415047870383', '测绘工程中心', 11046.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2296, '1648881415047870383', '实际结算总金额', 11046.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2297, '1648881415047870443', '结算费用合计', 13892.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2298, '1648881415047870443', '台班费', 0.00, '现场使用车辆4天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2299, '1648881415047870443', '测绘工程中心质保金', 600.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2300, '1648881415047870443', '测绘工程中心', 13292.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2301, '1648881415047870443', '实际结算总金额', 13292.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2302, '1648881415047870397', '结算费用合计', 7040.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2303, '1648881415047870397', '台班费', 0.00, '本项目未使用公司车辆', '0');
INSERT INTO `cmc_settle_summary` VALUES (2304, '1648881415047870397', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2305, '1648881415047870397', '测绘工程中心', 7040.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2306, '1648881415047870397', '实际结算总金额', 7040.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2307, '1648881415047870346', '实际结算总金额', 6090.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2308, '1648881415047870300', '结算费用合计', 27120.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2309, '1648881415047870276', '结算费用合计', 111411.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2310, '1648881415047870276', '台班费', 5940.00, '租车33天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2311, '1648881415047870276', '航测遥感中心质保金', 8000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2312, '1648881415047870276', '激光技术中心质保金', 2400.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2313, '1648881415047870276', '航测遥感中心', 73545.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2314, '1648881415047870276', '激光技术中心', 21877.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2315, '1648881415047870276', '实际结算总金额', 95423.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2316, '1648881415047870437', '结算费用合计', 649810.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2317, '1648881415047870434', '激光技术中心质保金', 2500.90, '激光技术中心', '0');
INSERT INTO `cmc_settle_summary` VALUES (2318, '1648881415047870434', '航测遥感中心质保金', 1268.80, '航测遥感中心', '0');
INSERT INTO `cmc_settle_summary` VALUES (2319, '1648881415047870434', '激光技术中心', 22508.30, '激光技术中心', '1');
INSERT INTO `cmc_settle_summary` VALUES (2320, '1648881415047870434', '航测遥感中心', 11418.90, '航测遥感中心', '1');
INSERT INTO `cmc_settle_summary` VALUES (2321, '1648881415047870434', '实际结算总金额', 33927.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2322, '1648881415047870445', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2323, '1648881415047870445', '实际结算总金额', 1572348.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2324, '1648881415047870445', '外业结算金额', 1572348.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2325, '1648881415047870418', '台班费', 1260.00, '现场使用车辆川A 0T2827天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2326, '1648881415047870418', '航测遥感中心质保金', 4800.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2327, '1648881415047870418', '测绘工程中心质保金', 7150.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2328, '1648881415047870418', '航测遥感中心', 34965.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2329, '1648881415047870418', '激光技术中心', 6442.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2330, '1648881415047870381', '结算费用合计', 2040.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2331, '1648881415047870418', '测绘工程中心', 46740.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2332, '1648881415047870381', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2333, '1648881415047870381', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2334, '1648881415047870381', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2335, '1648881415047870381', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2336, '1648881415047870381', '实际结算总金额', 2040.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2337, '1648881415047870416', '结算费用合计', 1110.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2338, '1648881415047870416', '外业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2339, '1648881415047870416', '内业质保金', NULL, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2340, '1648881415047870416', '外业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2341, '1648881415047870416', '内业结算金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2342, '1648881415047870416', '实际结算总金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2343, '1648881415047870418', '实际结算总金额', 88148.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2344, '1648881415047870423', '结算费用合计', 7423.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2345, '1648881415047870423', '台班费', 1080.00, '现场使用公司车辆川A2239Q6天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2346, '1648881415047870423', '测绘工程中心质保金', 400.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2347, '1648881415047870423', '测绘工程中心', 5943.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2348, '1648881415047870423', '实际结算总金额', 5943.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2349, '1648881415047870418', '结算费用合计', 101358.40, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2350, '1648881415047870280', '结算费用合计', 29964.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2351, '1648881415047870280', '台班费', 1620.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2352, '1648881415047870280', '航测遥感中心质保金', 1200.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2353, '1648881415047870280', '激光技术中心质保金', 1800.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2354, '1648881415047870280', '航测遥感中心', 10800.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2355, '1648881415047870280', '激光技术中心', 16164.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2356, '1648881415047870280', '实际结算总金额', 25344.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2357, '1648881415047870412', '台班费', 27540.00, '现场使用车辆153天（康科伟31天、凌涛80天、周建伟42天）', '0');
INSERT INTO `cmc_settle_summary` VALUES (2358, '1648881415047870412', '两河口测量中心质保金', 3976.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2359, '1648881415047870412', '地理信息中心质保金', 798.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2360, '1648881415047870412', '航测遥感中心质保金', 7843.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2361, '1648881415047870412', '激光技术中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2362, '1648881415047870412', '测绘工程中心质保金', 29919.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2363, '1648881415047870412', '结算费用合计', 469536.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2364, '1648881415047870412', '两河口测量中心', 35780.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2365, '1648881415047870412', '地理信息中心', 7178.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2366, '1648881415047870412', '航测遥感中心', 70583.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2367, '1648881415047870412', '激光技术中心', 22872.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2368, '1648881415047870412', '测绘工程中心', 263047.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2369, '1648881415047870412', '实际结算总金额', 399461.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2370, '1648881415047870203', '结算费用合计', 10280.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2371, '1648881415047870203', '实际结算总金额', 10280.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2372, '1648881415047870432', '台班费', 900.00, '租车现场使用5天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2373, '1648881415047870432', '测绘工程中心质保金', 300.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2374, '1648881415047870432', '测绘工程中心', 14746.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2375, '1648881415047870432', '实际结算总金额', 14746.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2376, '1648881415047870432', '结算费用合计', 15946.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2377, '1648881415047870388', '测绘工程中心质保金', 751.10, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2378, '1648881415047870388', '测绘工程中心', 6760.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2379, '1648881415047870388', '实际结算总金额', 6760.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2380, '1648881415047870241', '航测遥感中心', 5968.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2381, '1648881415047870319', '台班费', 1440.00, '8天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (2382, '1648881415047870319', '测绘工程中心', 12128.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2383, '1648881415047870319', '实际结算总金额', 12128.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2384, '1648881415047870380', '结算费用合计', 14333.90, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2385, '1648881415047870380', '台班费', 0.00, '现场工作3天，不扣台班费。', '0');
INSERT INTO `cmc_settle_summary` VALUES (2386, '1648881415047870380', '测绘工程中心质保金', 0.00, '2020年项目不扣质保金', '0');
INSERT INTO `cmc_settle_summary` VALUES (2387, '1648881415047870380', '航测遥感中心质保金', 0.00, '2020年项目不扣质保金', '0');
INSERT INTO `cmc_settle_summary` VALUES (2388, '1648881415047870380', '测绘工程中心', 9908.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2389, '1648881415047870380', '航测遥感中心', 4425.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2390, '1648881415047870388', '结算费用合计', 7511.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2391, '1648881415047870241', '激光技术中心', 630.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2392, '1648881415047870241', '实际结算总金额', 20375.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2393, '1648881415047870319', '结算费用合计', 13568.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2394, '1648881415047870380', '实际结算总金额', 14333.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2395, '1648881415047870436', '外业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2396, '1648881415047870436', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2397, '1648881415047870436', '外业结算金额', 170000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2398, '1648881415047870436', '内业结算金额', 35000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2399, '1648881415047870436', '实际结算总金额', NULL, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2400, '1648881415047870298', '测绘工程中心', 10289.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2401, '1648881415047870298', '测绘工程中心质保金', 1143.30, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2402, '1648881415047870298', '激光技术中心', 23878.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2403, '1648881415047870298', '激光技术中心质保金', 2653.20, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2404, '1648881415047870429', '结算费用合计', 2690.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2405, '1648881415047870298', '实际结算总金额', 34168.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2406, '1648881415047870436', '结算费用合计', 205000.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2407, '1648881415047870298', '结算费用合计', 37964.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2408, '1648881415047870429', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2409, '1648881415047870429', '激光技术中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2410, '1648881415047870429', '激光技术中心', 2690.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2411, '1648881415047870429', '实际结算总金额', 2690.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2412, '1648881415047870305', '台班费', 5400.00, '30天*1车', '0');
INSERT INTO `cmc_settle_summary` VALUES (2413, '1648881415047870305', '测绘工程中心', 83121.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2414, '1648881415047870305', '测绘工程中心质保金', 9835.70, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2415, '1648881415047870305', '航测遥感中心', 53113.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2416, '1648881415047870305', '航测遥感中心质保金', 5901.50, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2417, '1648881415047870305', '激光技术中心', 7342.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2418, '1648881415047870305', '激光技术中心质保金', 815.80, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2419, '1648881415047870305', '实际结算总金额', 143577.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2420, '1648881415047870305', '结算费用合计', 165530.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2421, '1648881415047870271', '结算费用合计', 1790.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2422, '1648881415047870271', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2423, '1648881415047870271', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2424, '1648881415047870271', '测绘工程中心', 1790.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2425, '1648881415047870271', '实际结算总金额', 1790.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2426, '1648881415047870287', '结算费用合计', 3720.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2427, '1648881415047870287', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2428, '1648881415047870287', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2429, '1648881415047870287', '测绘工程中心', 3720.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2430, '1648881415047870287', '实际结算总金额', 3720.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2431, '1648881415047870152', '结算费用合计', 4644.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2432, '1648881415047870152', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2433, '1648881415047870152', '两河口测量中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2434, '1648881415047870152', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2435, '1648881415047870152', '两河口测量中心', 3469.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2436, '1648881415047870152', '航测遥感中心', 1175.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2437, '1648881415047870152', '实际结算总金额', 4644.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2438, '1648881415047870282', '结算费用合计', 16317.20, '内外业均为航测遥感中心', '2');
INSERT INTO `cmc_settle_summary` VALUES (2439, '1648881415047870282', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2440, '1648881415047870282', '航测遥感中心质保金', 1400.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2441, '1648881415047870282', '航测遥感中心', 14917.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2442, '1648881415047870282', '实际结算总金额', 14917.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2443, '1648881415047870311', '结算费用合计', 3534.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2444, '1648881415047870311', '台班费', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2445, '1648881415047870311', '两河口测量中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2446, '1648881415047870311', '两河口测量中心', 3534.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2447, '1648881415047870311', '实际结算总金额', 3534.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2448, '1648881415047870415', '台班费', 1080.00, '现场用车6天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2449, '1648881415047870415', '测绘工程中心质保金', 1000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2450, '1648881415047870415', '测绘工程中心', 27121.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2451, '1648881415047870415', '实际结算总金额', 27121.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2452, '1648881415047870415', '结算费用合计', 29201.60, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2453, '1648881415047870402', '结算费用合计', 7725.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2454, '1648881415047870402', '航测遥感中心', 2395.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2455, '1648881415047870402', '测绘工程中心', 840.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2456, '1648881415047870402', '激光技术中心', 4490.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2457, '1648881415047870402', '实际结算总金额', 7725.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2458, '1648881415047870400', '实际结算总金额', 1500.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2459, '1648881415047870338', '测绘工程中心质保金', 3506.30, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2460, '1648881415047870338', '激光技术中心', 10021.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2461, '1648881415047870338', '激光技术中心质保金', 1113.50, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2462, '1648881415047870338', '实际结算总金额', 39958.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2463, '1648881415047870400', '结算费用合计', 1500.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2464, '1648881415047870338', '测绘工程中心', 29936.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2465, '1648881415047870245', '工程监测中心', 289294.02, '结算金额90%', '1');
INSERT INTO `cmc_settle_summary` VALUES (2466, '1648881415047870245', '实际结算总金额', 289294.02, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2467, '1648881415047870279', '结算费用合计', 25149.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2468, '1648881415047870279', '航测遥感中心质保金', 1300.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2469, '1648881415047870279', '激光技术中心质保金', 1100.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2470, '1648881415047870279', '航测遥感中心', 11677.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2471, '1648881415047870279', '激光技术中心', 11071.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2472, '1648881415047870279', '实际结算总金额', 22749.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2473, '1648881415047870290', '结算费用合计', 22617.70, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2474, '1648881415047870290', '台班费', 1800.00, '10天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2475, '1648881415047870290', '测绘工程中心质保金', 2081.80, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2476, '1648881415047870290', '测绘工程中心', 18735.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2477, '1648881415047870290', '实际结算总金额', 18735.90, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2478, '1648881415047870301', '结算费用合计', 11510.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2479, '1648881415047870442', '结算费用合计', 51800.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2480, '1648881415047870444', '结算费用合计', 238230.80, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2481, '1648881415047870444', '外业质保金', 23823.08, '暂扣10%', '0');
INSERT INTO `cmc_settle_summary` VALUES (2482, '1648881415047870444', '内业质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2483, '1648881415047870444', '外业结算金额', 214407.72, '总结算金额90%', '1');
INSERT INTO `cmc_settle_summary` VALUES (2484, '1648881415047870444', '内业结算金额', 0.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2485, '1648881415047870424', '结算费用合计', 208350.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2486, '1648881415047870424', '台班费', 10620.00, '现场累计用车59天，其中罗有权54天，康科伟5天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2487, '1648881415047870424', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2488, '1648881415047870435', '测绘工程中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2489, '1648881415047870435', '实际结算总金额', 2100.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2490, '1648881415047870424', '地理信息中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2491, '1648881415047870424', '测绘工程中心质保金', 10000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2492, '1648881415047870382', '台班费', 0.00, '按人天结算不扣台班费', '0');
INSERT INTO `cmc_settle_summary` VALUES (2493, '1648881415047870382', '航测遥感中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2494, '1648881415047870424', '航测遥感中心', 1004.20, '水下地形图制作', '1');
INSERT INTO `cmc_settle_summary` VALUES (2495, '1648881415047870424', '地理信息中心', 1050.00, '染、截图，高程标注等，地理信息中心完成，5人天，单价210（含修改）', '1');
INSERT INTO `cmc_settle_summary` VALUES (2496, '1648881415047870424', '测绘工程中心', 185675.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2497, '1648881415047870424', '实际结算总金额', 187730.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2498, '1648881415047870444', '实际结算总金额', 214407.72, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2499, '1648881415047870382', '测绘工程中心质保金', 3000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2500, '1648881415047870382', '航测遥感中心', 600.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2501, '1648881415047870382', '测绘工程中心', 33000.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2502, '1648881415047870382', '实际结算总金额', 33600.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2503, '1648881415047870273', '激光技术中心质保金', 5000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2504, '1648881415047870273', '激光技术中心', 46259.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2505, '1648881415047870273', '实际结算总金额', 46259.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2506, '1648881415047870435', '测绘工程中心', 2100.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2507, '1648881415047870273', '结算费用合计', 51259.50, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2508, '1648881415047870265', '结算费用合计', 12960.00, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2509, '1648881415047870265', '测绘工程中心', 12960.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2510, '1648881415047870265', '实际结算总金额', 12960.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2511, '1648881415047870262', '金川测量中心', 9927.40, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2512, '1648881415047870262', '激光技术中心质保金', 628.10, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2513, '1648881415047870262', '激光技术中心', 5652.70, '王刚、夏志军、熊艳华', '1');
INSERT INTO `cmc_settle_summary` VALUES (2514, '1648881415047870262', '金川测量中心质保金', 1103.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2515, '1648881415047870262', '航测遥感中心质保金', 812.70, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2516, '1648881415047870262', '航测遥感中心', 7314.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2517, '1648881415047870262', '实际结算总金额', 22894.80, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2518, '1648881415047870267', '金川测量中心', 1600.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2519, '1648881415047870353', '结算费用合计', 46994.20, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2520, '1648881415047870353', '台班费', 1980.00, '地形图测绘现场租车6天，地类图测绘使用公司车辆5天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2521, '1648881415047870353', '航测遥感中心质保金', 420.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2522, '1648881415047870353', '测绘工程中心质保金', 3900.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2523, '1648881415047870353', '航测遥感中心', 3823.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2524, '1648881415047870267', '金川测量中心质保金', 0.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2525, '1648881415047870267', '实际结算总金额', 1600.00, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2526, '1648881415047870242', '工程监测中心', 1693708.47, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2527, '1648881415047870242', '实际结算总金额', 1693708.47, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2528, '1648881415047870353', '测绘工程中心', 36870.70, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2529, '1648881415047870353', '实际结算总金额', 40694.20, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2530, '1648881415047870384', '台班费', 7020.00, '现场使用川A3760U车辆39天', '0');
INSERT INTO `cmc_settle_summary` VALUES (2531, '1648881415047870384', '航测遥感中心质保金', 270.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2532, '1648881415047870384', '测绘工程中心质保金', 9000.00, NULL, '0');
INSERT INTO `cmc_settle_summary` VALUES (2533, '1648881415047870384', '航测遥感中心', 2485.50, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2534, '1648881415047870384', '测绘工程中心', 81599.60, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2535, '1648881415047870384', '结算费用合计', 100375.10, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2536, '1648881415047870384', '实际结算总金额', 84085.10, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2537, '1648881415047870236', '结算费用合计', 14971.30, NULL, '2');
INSERT INTO `cmc_settle_summary` VALUES (2538, '1648881415047870236', '巴拉测量中心', 8201.30, NULL, '1');
INSERT INTO `cmc_settle_summary` VALUES (2539, '1648881415047870236', '航测遥感中心', 5720.00, NULL, '1');

-- ----------------------------
-- 65、files成果管理表
-- ----------------------------
DROP TABLE IF EXISTS `files_achievement`;
CREATE TABLE `files_achievement`  (
  `id` char(19) NOT NULL COMMENT '成果id',
  `project_id` char(19) DEFAULT NULL COMMENT '项目id',
  `achi_name` varchar(255) DEFAULT NULL COMMENT '成果名称',
  `data_year` char(10) DEFAULT NULL COMMENT '数据年份',
  `scale_grade` char(2) DEFAULT NULL COMMENT '比例尺或等级',
  `result_type` char(2) DEFAULT NULL COMMENT '成果类型',
  `file_type` char(20) DEFAULT NULL COMMENT '文件类型',
  `submit_date` datetime DEFAULT NULL COMMENT '成果提交时间',
  `kml_url` varchar(255) DEFAULT NULL COMMENT 'kmL地址',
  `kml_lng` varchar(20) DEFAULT NULL COMMENT 'kml文件的中心位置经度',
  `kml_lat` varchar(20) DEFAULT NULL COMMENT 'kml文件的中心位置纬度',
  `work_load` char(20) DEFAULT NULL COMMENT '工作量',
  `unit` char(10) DEFAULT NULL COMMENT '单位',
  `data_source` varchar(100) DEFAULT NULL COMMENT '数据来源',
  `data_type` char(10) DEFAULT NULL COMMENT '数据类型（0原始数据，1成果数据，2过程数据）',
  `storage_id` char(19) DEFAULT NULL COMMENT '存放地址id',
  `production_time` datetime DEFAULT NULL COMMENT '生产日期',
  `remark` varchar(255) DEFAULT NULL COMMENT '备注',
  `resolution` char(10) DEFAULT NULL COMMENT '分辨率（米）',
  `geodetic_datum` char(40) DEFAULT NULL COMMENT '大地基准',
  PRIMARY KEY (`id`) USING BTREE
) ENGINE = InnoDB comment = 'files成果管理表';

-- ----------------------------
-- 初始化-成果管理表数据
-- ----------------------------
INSERT INTO `files_achievement` VALUES ('1649965753260834818', '1648881413751832578', '四川省云南省金沙江溪洛渡水电站天星坝水库界桩测设测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '2016年资料', NULL, '1648948467972440066', '2022-01-01 00:00:00', '利用2016年资料提交', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965753495715842', '1648881413751832578', '金沙江溪洛渡水电站天星坝水库库区红线图', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '2016年资料', NULL, '1648948467972440066', '2022-01-01 00:00:00', '利用2016年资料提交', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965753638322178', '1648881413751832578', '金沙江溪洛渡水电站天星坝水库库区部分界桩照片', '2022年', NULL, '16', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, '2016年资料', NULL, '1648948467972440066', '2022-01-01 00:00:00', '利用2016年资料提交', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965753751568386', '1648881413751832578', '金沙江溪洛渡水电站天星坝水库界桩测设项目移交单2022.4.5', '2022年', NULL, '16', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, '2016年资料', NULL, '1648948467972440066', '2022-01-01 00:00:00', '利用2016年资料提交', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965753848037378', '1648881413709889537', '大渡河瀑布沟水电站丰乐浸水湾地形图1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948468475756545', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965753986449409', '1648881413709889537', '瀑布沟丰乐浸水湾1000地形图测绘-测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948468475756545', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965754129055745', '1648881413709889537', '瀑布沟丰乐浸水湾1000地形图测绘-管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948468475756545', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965754238107649', '1648881413709889537', '瀑布沟丰乐浸水湾1000地形图测绘无人机航飞原始数据', '2022年', NULL, '9', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948468735803394', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965754326188034', '1648881413709889537', '瀑布沟丰乐浸水湾1000地形图测绘无人机航飞成果文件', '2022年', NULL, '9', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948468735803394', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965754414268418', '1648881413684723714', '岷江老木孔水电站移民1：2000地形图（正式）', '2022年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1623559121207558145', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965754502348801', '1648881413651169282', '焦子坪移民安置点地形图1：500', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948469130067969', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965754594623489', '1648881413651169282', '丹巴绒坝沟补测省道S2111：1000地形图测绘', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948469130067969', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965754682703873', '1648881413651169282', '丹巴绒坝沟取水口1：500地形图测绘', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948469130067969', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965754770784257', '1648881413651169282', '丹巴绒坝沟绒坝沟沟口处1：1000地形图测绘', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948469130067969', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965754858864641', '1648881413651169282', '丹巴绒坝沟土地整理区（1）1：1000地形图测绘', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948469130067969', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965754942750721', '1648881413651169282', '丹巴绒坝沟土地整理区（2）1：1000地形图测绘', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948469130067969', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965755030831105', '1648881413651169282', '丹巴绒坝沟引水线路1：1000地形图测绘', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948469130067969', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965755118911489', '1648881413651169282', '焦子坪移民安置点、引水线路等地形图测量-测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948469130067969', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965755211186177', '1648881413651169282', '焦子坪移民安置点、引水线路等地形图测量--管理记录资料 ', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948469130067969', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965755345403905', '1648881413651169282', '丹巴-绒坝沟图根点、像控点', '2022年', NULL, '8', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948469130067969', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965755433484289', '1648881413651169282', '焦子坪移民安置点-图根点', '2022年', NULL, '8', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948469130067969', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965755521564674', '1648881413651169282', '焦子坪移民安置点、引水线路等地形图测量原始数据', '2022年', NULL, '9', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948470107340802', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965755605450753', '1648881413651169282', '焦子坪移民安置点、引水线路等地形图测量成果文件', '2022年', NULL, '9', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948470107340802', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965755693531138', '1648881413667946498', '磨子沟取水口修复1：500地形图', '2022年', '1', '2', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948470296084481', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965755831943169', '1648881413667946498', '牛棚子沟泥石流治理工程初步设计1：1000地形图', '2022年', '2', '2', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948470296084481', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965755932606465', '1648881413667946498', '牛棚子沟泥石流治理拟设坝1：500地形图', '2022年', '1', '2', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948470296084481', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965756029075457', '1648881413667946498', '菩提河坝安置场地后坡危岩治理工程1：500地形图', '2022年', '1', '2', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948470296084481', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965756121350145', '1648881413667946498', '菩提河坝安置场地后坡危岩治理工程堆渣场地1：500地形图', '2022年', '1', '2', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948470296084481', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965756213624833', '1648881413667946498', '长河坝水电站牛棚子沟泥石流治理工程初步设计1：1000地形图及菩提河坝安置场地后坡危岩治理工程设计变更1：500地形图测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948470296084481', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965756305899521', '1648881413667946498', '长河坝水电站牛棚子沟泥石流治理工程初步设计1：1000地形图及菩提河坝安置场地后坡危岩治理工程设计变更1：500地形图测绘-管理记录资料 ', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948470296084481', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965756398174210', '1648881413667946498', '长河坝水电站牛棚子沟泥石流治理工程初步设计1：1000地形图及菩提河坝安置场地后坡危岩治理工程设计变更1：500地形图测绘无人机数据', '2022年', NULL, '9', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948470925230081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965756494643202', '1648881413584060417', '2-坐标和高程转换模', '2022年', NULL, '16', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948471017504769', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965756586917889', '1648881413584060417', '大渡河硬梁包水电站扯索坝和二里坝桥行洪论证地形图(含水下202203)1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948471017504769', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965756746301441', '1648881413584060417', '横断面测量成果数据', '2022年', NULL, '16', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948471017504769', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965756838576130', '1648881413584060417', '涉河建筑轮廓分布图', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948471017504769', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965756930850817', '1648881413584060417', '涉河建筑摄影', '2022年', NULL, '16', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948471017504769', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965757023125506', '1648881413584060417', '同时水边线及流量测验成果', '2022年', NULL, '8', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948471017504769', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965757123788802', '1648881413584060417', '硬梁包水电站扯索坝和二里坝桥行洪论证-测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948471017504769', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965757224452097', '1648881413584060417', '硬梁包水电站扯索坝和二里坝桥行洪论证-管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948471017504769', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965757375447041', '1648881413550505985', '硬梁包水电站扯索坝和二里坝桥行洪论证-测绘原始数据', '2022年', NULL, '9', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948471856365569', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965757463527425', '1648881413550505985', '硬梁包水电站扯索坝和二里坝桥行洪论证-测绘成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948471856365569', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965757555802114', '1648881413550505985', '紫霞水电站溃坝分析断面测量及地形图测量-测绘报告 ', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948472120606722', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965757648076801', '1648881413550505985', '紫霞水电站溃坝分析断面测量及地形图测量-管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948472120606722', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965757736157186', '1648881413550505985', '紫霞水电站溃坝分析断面测量及地形图测量无人机项目数据', '2022年', NULL, '9', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948472342904834', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965757828431874', '1648881413550505985', '1-水面线', '2022年', NULL, '9', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948472342904834', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965757916512258', '1648881413550505985', '2-紫霞溃坝分析-断面基点-横断面成果', '2022年', NULL, '9', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948472342904834', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965758008786945', '1648881413550505985', '3-报告文档', '2022年', NULL, '9', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948472342904834', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965758096867329', '1648881413550505985', '4-DOM', '2022年', NULL, '9', 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948472342904834', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965758189142017', '1648881413550505985', '5-地形图', '2022年', NULL, '9', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948472342904834', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965758281416705', '1648881413550505985', '6-断面基点照片', '2022年', NULL, '9', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948472342904834', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965758369497090', '1648881413550505985', '7-转换模型', '2022年', NULL, '9', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948472342904834', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965758461771778', '1648881413550505985', '8-kml范围和控制点', '2022年', NULL, '9', 'kml', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1648948472342904834', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965758549852161', '1648881413894438914', '川西大桥固床坝及工点边坡地形图测量 测绘报告', '2022年', '2', '2', 'doc', NULL, NULL, NULL, NULL, NULL, NULL, '无人机飞行', NULL, '1648948473227902977', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965758642126849', '1648881413894438914', '无人机项目数据原始数据', '2022年', '2', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机飞行', NULL, '1648948473332760577', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965758788927489', '1648881413894438914', '无人机项目数据成果文件', '2022年', '2', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机飞行', NULL, '1648948473332760577', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965758877007873', '1648881413894438914', '三维模型', '2022年', '2', '3', 'stl', NULL, NULL, NULL, NULL, NULL, NULL, '无人机飞行', NULL, '1648948473332760577', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965758969282561', '1648881413894438914', 'DOM', '2022年', '2', '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机飞行', NULL, '1648948473332760577', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965759057362945', '1648881413894438914', '四川省彭州市工点二边坡地形图(202201)1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, '0.029', NULL, '无人机飞行', NULL, '1648948473227902977', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965759141249026', '1648881413894438914', '四川省彭州市工点三边坡地形图(202201)1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, '0.065', NULL, '无人机飞行', NULL, '1648948473227902977', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965759233523713', '1648881413894438914', '四川省彭州市川西大桥固床坝地形图(202201)1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, '0.724', NULL, '无人机飞行', NULL, '1648948473227902977', '2022-01-01 01:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965759325798401', '1648889800975712257', '天星坝GPS点成果表', '2022年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948473844465666', NULL, '陈总计算资料-20220321陈洪归档 已归档至2015年91号光盘中-', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965759422267394', '1648889800975712257', '新图-CGCS2000(103°39′15″)坐标转换', '2022年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948473844465666', NULL, '陈总计算资料-20220321陈洪归档 已归档至2015年91号光盘中-', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965759602622466', '1648889800975712257', '原图-新图坐标转换', '2022年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948473844465666', NULL, '陈总计算资料-20220321陈洪归档 已归档至2015年91号光盘中-', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965759699091458', '1654408468736245761', '成华管网2包汇交成果 (3.4.5区管线图数据库)', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948474108706818', NULL, '2022.3.4张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965759980109825', '1648881419619663874', '德阳市罗江区自然资源局全域1：500 数字化地形（地籍）测量-地形部分-技术设计书', '2019年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948474385530881', NULL, '20220217何杰提交-报奖', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965760097550337', '1648881419619663874', '德阳市罗江区自然资源局全域1：500 数字化地形（地籍）测量-地形部分-技术总结', '2019年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948474385530881', NULL, '20220217何杰提交-报奖', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965760240156673', '1648881419619663874', '德阳市罗江区自然资源局全域1：500 数字化地形（地籍）测量-房产部分-技术设计书', '2019年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948474385530881', NULL, '20220217何杰提交-报奖', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965760378568705', '1648881419619663874', '德阳市罗江区自然资源局全域1：500 数字化地形（地籍）测量-房产部分-技术总结', '2019年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948474385530881', NULL, '20220217何杰提交-报奖', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965760470843394', '1648881419619663874', '德阳市罗江区自然资源局全域1500数字化地形（地籍）测量和全域宅基地房地合一颁证-检查报告', '2019年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948474385530881', NULL, '20220217何杰提交-报奖', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965760823164929', '1648881413529534465', '测深仪原始数据', '2022年', NULL, '8', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '野外实测', NULL, '1648948475060813826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965760915439618', '1648881413529534465', '黄河干流若尔盖段应急处置项目原始水下地形测量项目测绘报告', '2022年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '野外实测', NULL, '1648948475060813826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965761066434562', '1648881413529534465', '黄河干流若尔盖段应急处置项目-水下地形图成果', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '野外实测', NULL, '1648948475060813826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965761154514946', '1648881413529534465', '黄河干流若尔盖段应急处置项目原始水下地形测量项目管理记录资料', '2022年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '野外实测', NULL, '1648948475060813826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965761238401026', '1648881413529534465', '高程转换模型2', '2022年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, '野外实测', NULL, '1648948475060813826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965761418756097', '1648881414431309825', '南江抽水蓄能电站预可阶段地形图控制点测量', '2021年', '3', NULL, 'doc/docx', NULL, NULL, NULL, NULL, '10', '个', '野外实测', NULL, '1648948475572518914', '2021-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965761511030786', '1648881414431309825', '南江抽水蓄能电站预可阶段上水库及输水发电系统区地形图1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, '11.17', 'km²', '2021年点云+航摄影像', NULL, '1648948475572518914', '2021-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965761603305474', '1648881414431309825', '南江抽水蓄能电站预可阶段工程区地形图1：5000', '2021年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, '21.91', 'km²', '2021年点云+航摄影像', NULL, '1648948475572518914', '2021-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965761708163073', '1648881414431309825', '南江抽水蓄能电站预可阶段上水库及输水发电系统区：2000三维地形面', '2021年', '3', '4', 'stl', NULL, NULL, NULL, NULL, '11.17', 'km²', '2021年地形图/点云/航测数据', NULL, '1648948475572518914', '2021-01-01 00:00:00', 'CGCS2000坐标系统、1985国家高程基准高斯投影', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965761846575106', '1648881414431309825', '南江抽水蓄能电站预可阶段工程区1：5000三维地形面', '2021年', '4', '4', 'stl', NULL, NULL, NULL, NULL, '21.91', 'km²', '2021年地形图/点云/航测数据', NULL, '1648948475572518914', '2021-01-01 00:00:00', 'CGCS2000坐标系统、1985国家高程基准高斯投影', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965761938849793', '1648881414431309825', '南江抽水蓄能电站预可阶段地形图DOM制作', '2021年', '3', '1', 'stl', NULL, NULL, NULL, NULL, '21.91', 'km²', '2021年航摄影像', NULL, '1648948475572518914', '2021-01-01 00:00:00', 'CGCS2000坐标系统、1985国家高程基准高斯投影', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965762077261825', '1648881414431309825', '南江抽水蓄能电站预可阶段地形图测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948476155527169', '2021-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965762165342209', '1648881414431309825', '南江抽水蓄能电站预可阶段地形图测量管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948476155527169', '2021-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965762257616897', '1648881414431309825', '南江抽水蓄能电站激光数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '激光扫描', NULL, '1648948475572518914', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965762345697282', '1648881414431309825', '南江抽水蓄能电站激光数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '激光扫描', NULL, '1648948475572518914', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965762433777666', '1648881414431309825', '南江抽水蓄能电站无人机数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机', NULL, '1648948475572518914', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965762521858049', '1648881414431309825', '南江抽水蓄能电站无人机数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机', NULL, '1648948475572518914', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965762609938433', '1648881413378539521', '石棉县孟获城景区规划用地202226号宗地图', '2022年', NULL, '8', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948476512043009', NULL, '1980西安坐标系和CGCS2000坐标系统两成果', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965762698018817', '1648881413378539521', '石棉县孟获城景区规划用地202226号界址点成果表', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948476512043009', NULL, '1980西安坐标系和CGCS2000坐标系统两成果', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965762786099202', '1648881413378539521', '石棉县孟获城景区规划用地孟获城202226宗地测量技术报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948476512043009', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965762874179585', '1648881413378539521', '石棉县孟获城景区规划用地202226号宗地地形图', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948476512043009', NULL, '1980西安坐标系和CGCS2000坐标系统两成果', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965762962259969', '1648881413378539521', '石棉县孟获城景区规划用地202227号宗地图', '2022年', NULL, '8', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948476512043009', NULL, '1980西安坐标系和CGCS2000坐标系统两成果', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965763054534658', '1648881413378539521', '石棉县孟获城景区规划用地202227号界址点成果表', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948476512043009', NULL, '1980西安坐标系和CGCS2000坐标系统两成果', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965763205529601', '1648881413378539521', '石棉县孟获城景区规划用地孟获城202227宗地测量技术报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948476512043009', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965763293609985', '1648881413378539521', '石棉县孟获城景区规划用地202227号宗地地形图', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948476512043009', NULL, '1980西安坐标系和CGCS2000坐标系统两成果', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965763612377090', '1648881413311430658', '云南罗富高速公路航飞项目航飞资料', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '激光扫描', NULL, '1648948477413818369', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965763700457473', '1648881413311430658', '云南省曲靖市罗富高速公路航飞项目-仪器检定资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948477506093058', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965763788537857', '1648881413311430658', '云南省曲靖市罗富高速公路航飞项目-管理记录资料 ', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948477506093058', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965763876618242', '1648881413311430658', '云南省曲靖市罗富高速公路航飞项目-技术设计书', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948477506093058', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965763964698626', '1648881413311430658', '云南省曲靖市罗富高速公路航飞项目-技术总结', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948477506093058', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965764405100546', '1648881413093326850', '黄河干流若尔盖段应急处置项目竣工测量项目测绘报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948478286233601', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965764493180929', '1648881413093326850', '高程转换模型2（提交）', '2022年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948478286233601', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965764585455618', '1648881413093326850', '黄河干流若尔盖段应急处置项目竣工测量检查记录管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948478286233601', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965764736450561', '1648881413093326850', '黄河干流若尔盖段应急处置项目竣工测量地形图（含水下）-500', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948478286233601', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965764824530945', '1648881413093326850', '水下原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948478286233601', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965765051023361', '1648881413051383810', '2022W23-武侯悦湖·硬科技创新中心标准厂房项目1：500地形图测绘 测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948478978293762', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965765139103745', '1648881413051383810', '2022W23-武侯悦湖·硬科技创新中心标准厂房项目1：500地形图测绘 管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948478978293762', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965765231378433', '1648881413051383810', '武侯悦湖硬科技创新中心标准厂房项目1：500地形图', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948478978293762', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965765323653121', '1648881413051383810', '转换模型', '2022年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948478978293762', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965767806681090', '1648881415765098497', '广安石鼓村灰场环保整治项目“临时封场”1：500地形图测绘报告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948481570373634', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965767894761473', '1648881415765098497', '广安石鼓村灰场环保整治项目“临时封场”1：500地形图测绘管理记录资料', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948481570373634', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965767982841857', '1648881415765098497', '广安石鼓村灰场环保整治项目“临时封场”1：500地形图', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948481570373634', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965768070922241', '1648881413512757249', '孟底沟水电站场内交通左岸、右岸公路工程项目测量原始资料', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948481813643265', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965768159002626', '1648881413512757249', '4-转换模型', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948481813643265', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965768251277314', '1648881413512757249', '5-控制点现场照片', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948481813643265', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965768389689345', '1648881413512757249', '孟底沟水电站场内交通左岸、右岸公路工程项目测量控制点测量', '2022年', '8', NULL, NULL, NULL, NULL, NULL, NULL, '19', '个', '野外实测', NULL, '1648948481813643265', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965768477769729', '1648881413512757249', '孟底沟水电站场内交通左岸、右岸公路工程项目测量地形图（【八孟公路】K5+040 呷尔隧道终点（洞口）、【八孟公路】K5+880 尼呷隧道起点（洞口）等', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, '0.141', 'km²', '野外实测', NULL, '1648948481813643265', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965768565850113', '1648881413512757249', '孟底沟水电站场内交通左岸、右岸公路工程项目测量横断面测绘', '2022年', '0', NULL, NULL, NULL, NULL, NULL, NULL, '0.308', 'km', '野外实测', NULL, '1648948481813643265', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965768658124801', '1648881413512757249', '公路-逐桩坐标表-放样成果', '2022年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948481813643265', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965768746205186', '1648881413512757249', '孟底沟水电站场内交通左岸、右岸公路工程项目测量-测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948481813643265', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965768838479874', '1648881413512757249', '孟底沟水电站场内交通左岸、右岸公路工程项目测量-管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948481813643265', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965768976891906', '1648881413181407233', '广东省梅县九龙嶂、台山黄茅岗抽蓄电站规划阶段测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317769934274562', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965769069166594', '1648881413181407233', '广东省梅县九龙嶂、台山黄茅岗抽蓄电站规划阶段管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317769934274562', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965769161441282', '1648881413181407233', '广东省梅县九龙嶂、台山黄茅岗抽蓄电站规划阶段测绘航飞资料激光', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '激光扫描', NULL, '1649317770106241025', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965769249521665', '1648881413181407233', '广东省梅县九龙嶂、台山黄茅岗抽蓄电站规划阶段测绘航飞资料激光', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '激光扫描', NULL, '1649317770106241025', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965769337602050', '1648881413181407233', '广东台山黄茅岗抽水蓄能水电站工程区地形图1：5000', '2022年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317770106241025', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965769429876737', '1648881413181407233', '广东台山黄茅岗抽水蓄能水电站工程区三维地形面1：5000', '2022年', '4', '4', 'dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317770106241025', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965769517957121', '1648881413181407233', '广东台山黄茅岗抽水蓄能水电站工程区正射影像1：5000', '2022年', '4', '1', 'tif', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317770106241025', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965769606037505', '1648881413181407233', '广东梅县抽水蓄能水电站工程区地形图1：5000', '2022年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965769685729282', '1648881413181407233', '广东梅县抽水蓄能水电站工程区三维地形面1：5000', '2022年', '4', '4', 'dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965769769615361', '1648881413181407233', '广东梅县抽水蓄能水电站工程区正射影像1：5000', '2022年', '4', '1', 'tif', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965769853501441', '1648881413181407233', '广东梅县抽水蓄能水电站杨背樟料场区地形图1：5000', '2022年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965769933193217', '1648881413147852802', '西藏自治区芒康县金上-湖北±800千伏直流工程换流站建设征地实物指标调查测量报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317770978656257', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965770025467905', '1648881413147852802', '西藏自治区芒康县金上-湖北±800千伏直流工程换流站建设征地实物指标调查管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317770978656257', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965770117742593', '1648881413147852802', '西藏自治区芒康县金上-湖北±800千伏直流工程换流站建设征地实物指标调查检查报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317770978656257', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965770256154625', '1648881412875223041', '山西左权箕山抽水蓄能水电站工程区地形图(202206)1：2000', '2022年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317771351949313', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965770365206530', '1648881412875223041', '山西左权箕山抽水蓄能水电站工程区三维地形面1：2000', '2022年', '3', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317771351949313', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965770520395777', '1648881412875223041', '山西省左权县箕山抽水蓄能电站测绘工作测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317771519721474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965770612670466', '1648881412875223041', '山西省左权县箕山抽水蓄能电站-管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317771519721474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965770700750849', '1648881412875223041', '山西省左权县箕山抽水蓄能电站航飞资料', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317771519721474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965770788831233', '1648881412875223041', '山西省左权县箕山抽水蓄能电站航飞资料', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317771351949313', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965770881105922', '1648881412648730625', 'CZTL康定段征地拆迁安置点规划设计项目地形图测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317771934957569', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965770969186306', '1648881412648730625', 'CZTL康定段征地拆迁安置点规划设计项目地形图测绘-管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317771934957569', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965771061460993', '1648881412648730625', 'CZTL康定段征地拆迁安置点规划设计项目地形图1：500', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317771934957569', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965771153735682', '1648881412648730625', 'CZTL康定段征地拆迁安置点规划设计项目地形图测绘航飞资料', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317772182421506', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965771300536322', '1648881413462425602', '新疆哈密抽水蓄能电站工程开挖区域精密测量及工程量计算技术服务 -技术设计书', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317772274696194', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965771392811010', '1648881413462425602', '新疆哈密抽水蓄能电站工程开挖区域精密测量及工程量计算技术服务检查报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317772274696194', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965771480891393', '1648881413462425602', '新疆哈密抽水蓄能电站工程开挖区域精密测量及工程量计算技术服务-仪器检定资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317772274696194', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965771568971778', '1648881413462425602', '测绘项目技术交底会议纪要-新疆哈密抽水蓄能电站工程开挖区域精密测量及工程量计算技术服务', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317772274696194', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965771661246466', '1648881413462425602', '新疆哈密抽水蓄能电站工程开挖区域精密测量及工程量计算技术服务项目-管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317772274696194', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965771749326850', '1648881413462425602', '新疆哈密抽水蓄能电站工程开挖区域精密测量及工程量计算技术服务项目对比结算工程量分析报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317772274696194', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965771845795842', '1648881413462425602', '新疆哈密抽水蓄能电站工程开挖区域精密测量及工程量计算技术服务合同航飞数据激光', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '激光扫描', NULL, '1649317772836732930', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965772021956609', '1648881413462425602', '新疆哈密抽水蓄能电站工程开挖区域精密测量及工程量计算技术服务合同航飞数据激光', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '激光扫描', NULL, '1649317772836732930', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965772114231297', '1648881413294653441', '黄河四川段综合治理可行性研究项目白河牧场2#、5#工程上游延长段断面、地形图', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317773004505090', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965772206505985', '1648881413294653441', '黄河四川段综合治理可行性研究项目求吉玛村1#、2#、3#工程上游延长段断面、地形图', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317773004505090', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965772294586369', '1648881413294653441', '复建公路2000-CGCS2000-31', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317773004505090', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965772386861058', '1648881413294653441', '黄河综合整治项目R05B段资料', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317773004505090', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965772525273089', '1648881414976569346', '绵竹市抽水蓄能电站预可阶段测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317773449101314', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965772617547778', '1648881414976569346', '绵竹市抽水蓄能电站预可阶段测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317773449101314', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965772705628161', '1648881414976569346', '四川省绵竹县抽水蓄能电站（负荷侧）预可研阶段工程区地形图1：5000', '2021年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317773616873474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965772793708545', '1648881414976569346', '四川省绵竹县抽水蓄能电站（负荷侧）预可研阶段工程区三维地形面1：5000', '2021年', '4', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317773616873474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965772890177537', '1648881414976569346', '四川省绵竹县抽水蓄能电站（负荷侧）预可研阶段上下水库及输水发电系统地形地类图1：2000', '2021年', '3', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317773616873474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965773053755394', '1648881414976569346', '四川省绵竹县抽水蓄能电站（负荷侧）预可研阶段上下水库及输水发电系统三维地形面1：2000', '2021年', '3', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317773616873474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965773146030082', '1648881414976569346', '绵竹市抽水蓄能电站预可阶段测绘无人机航飞资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', '原始数据', '1649317773944029185', '2021-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965773234110466', '1648881414976569346', '绵竹市抽水蓄能电站预可阶段测绘无人机航飞资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', '成果数据', '1649317773944029185', '2021-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965773322190850', '1648881413227544578', '四川省杂谷脑河狮子坪电站弃渣回采料场地形图测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317774115995650', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965773410271234', '1648881413227544578', '杂谷脑河狮子坪水电站弃渣料场地形图测绘-管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317774115995650', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965773502545922', '1648881413227544578', '杂谷脑河狮子坪水电站九架棚弃渣回采料场地形图（202204）1：1000', '2022年', '2', NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317774115995650', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965773636763649', '1648881413227544578', '杂谷脑河狮子坪水电站沙坝弃渣回采料场地形图（202204）1：1000', '2022年', '2', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317774115995650', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965773729038338', '1648881413227544578', '杂谷脑河狮子坪水电站弃渣料场地形图测绘无人机航飞资料', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1649317774527037442', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965773817118721', '1648881413227544578', '杂谷脑河狮子坪水电站弃渣料场地形图测绘无人机航飞资料', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1649317774527037442', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965773909393410', '1648881413114298369', '1-全野外数字测图-原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '野外实测', NULL, '1649317774699003905', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965773997473794', '1648881413114298369', '2-坐标转换模型', '2022年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317774699003905', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965774081359873', '1648881413114298369', '大渡河龚嘴水电站鱼道工程渣场地形图1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317774699003905', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965774173634561', '1648881413114298369', '龚嘴电站鱼道工程渣场地形图测量-测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317774699003905', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965774370766849', '1648881413114298369', '龚嘴电站鱼道工程渣场地形图测量-管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317774699003905', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965774496595969', '1648881413114298369', '龚嘴电站鱼道工程渣场地形图测量-航飞资料', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317775118434306', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965774588870657', '1648881413009440769', '革什扎河两河口水电站淹没影响区.gdb', '2022年', NULL, '2', 'gdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317775206514689', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965774676951041', '1648881413009440769', '革什扎河两河口用地范围图.gdb', '2022年', NULL, '2', 'gdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317775206514689', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965774769225729', '1648881413009440769', '革什扎河两河口水电站坐标转换工作管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317775206514689', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965774861500417', '1648881413030412290', '松多施工用地范围图.gdb', '2022年', NULL, '2', 'gdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317775466561537', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965774999912450', '1648881413030412290', '松多水库淹没影响区打桩定界图.gdb', '2022年', NULL, '2', 'gdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317775466561537', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965775092187137', '1648881413030412290', '巴楚河松多水电站坐标转换管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317775466561537', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965775184461826', '1648881412736811010', '广西壮族自治区南宁市上林抽水蓄能电站测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317775722414082', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965775276736514', '1648881412736811010', '广西壮族自治区南宁市上林抽水蓄能电站测绘报告管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317775722414082', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965775373205505', '1648881412736811010', '广西上林抽水蓄能电站工程区地形图(202207)1：5000', '2022年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317775894380545', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965775473868801', '1648881412736811010', '广西上林抽水蓄能电站溢洪道地形图(202207)1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317775894380545', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965775566143489', '1648881412736811010', '广西上林抽水蓄能电站工程区三维地形面1：5000', '2022年', '4', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317775894380545', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965775658418178', '1648881412736811010', '广西上林抽水蓄能电站溢洪道三维地形面1：1000', '2022年', '2', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317775894380545', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965775746498561', '1648881412736811010', '广西上林抽水蓄能电站工程区正射影像1：5000', '2022年', '4', '1', 'tif', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317775894380545', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965775834578945', '1648881412736811010', '广西壮族自治区南宁市上林抽水蓄能电站航飞资料', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317775894380545', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965775926853633', '1648881412124442625', '石棉县新民集镇震损变形应急监测报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317776552886274', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965776014934017', '1648881412124442625', '石棉县新民集镇震损变形应急监测简报(20221019)-(20221028)工10期', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317776552886274', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965776555999233', '1648881412984274945', '1 转换模型', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317777244946434', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965776644079618', '1648881412984274945', '2 实测数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317777244946434', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965776732160002', '1648881412984274945', '3 测绘范围', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317777244946434', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965776820240386', '1648881412984274945', '4 控制点', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317777244946434', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965776908320770', '1648881412984274945', '大渡河大岗山水电站泄洪洞出口左岸地形图1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317777244946434', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965776996401153', '1648881412984274945', '大渡河大岗山水电站泄洪洞出口右岸局部防护损毁处的坐标测量成果', '2022年', NULL, '8', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317777244946434', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965777134813186', '1648881412984274945', '大岗山水电站泄洪洞出口测绘技术服务合同-测绘报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317777244946434', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965777227087874', '1648881412984274945', '大岗山水电站泄洪洞出口测绘技术服务合同_管理记录资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317777244946434', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965778321801218', '1648881417849667586', '摸排台账数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654757996115001345', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965778460213249', '1648881417849667586', '失量成果数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654757996115001345', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965778556682242', '1648881417849667586', '文档', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654757996115001345', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965778976112641', '1648881411499491329', '南充市高坪区白塔街道景秀东方崩塌等30处地质灾害隐患点防治工程第一批次技术文件（PDF版）', '2023年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654759961054150658', NULL, '20230111勘察设计部陈兰归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965779068387330', '1648881411499491329', '现场核实表12.5', '2023年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654759961054150658', NULL, '20230111勘察设计部陈兰归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965779156467713', '1648881411499491329', '专家踏勘意见12.5', '2023年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654759961054150658', NULL, '20230111勘察设计部陈兰归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965779248742401', '1648881418239737858', '中程房地一体内外业最终成果地形图', '2020年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654764692367474689', NULL, ' 20230113朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965779341017090', '1648881415219838978', '都江堰市地下管线普查成果更新项目监理含都江堰管线普查项目验收报告', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654760945390190594', NULL, '20230117李磊归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965779433291777', '1648881412774559745', '原始观测记录', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654765302164750338', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965779525566465', '1648881412774559745', '报告文件', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654765302164750338', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965779676561410', '1648881412774559745', '作控制网布置图', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654765302164750338', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965779764641793', '1648881412774559745', '星坝水库输水工程左右干管控制点移交单（2022年7月17日）', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654765302164750338', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965779856916482', '1648881411705012226', '510521泸县.gdb', '2022年', NULL, '2', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654765584827285505', NULL, '20230113朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965779995328513', '1648881420227837954', '2019W07-泸县三调最终报告 ', '2019年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654766036100841473', NULL, '20230113朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965780087603202', '1648881517753794561', '2-RINEX文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654760275903774722', NULL, '20230202吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965780175683586', '1648881517753794561', '3-工程文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654760275903774722', NULL, '20230202吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965780263763969', '1648881517753794561', '4-基线文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654760275903774722', NULL, '20230202吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965780351844353', '1648881517753794561', '5-平差文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654760275903774722', NULL, '20230202吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965780444119042', '1648881517753794561', '6-同精度更新', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654760275903774722', NULL, '20230202吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965780536393729', '1648881517753794561', '7-CPI成果', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654760275903774722', NULL, '20230202吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965781530443778', '1648881412493541377', '1、大渡河老鹰岩一级水电站施工测量控制网设计、建网及首次观测技术设计书', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965781622718465', '1648881412493541377', '2、大渡河老鹰岩一级水电站施工测量控制网设计、建网及首次观测观测资料（2022年）', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965781710798850', '1648881412493541377', '3、大渡河老鹰岩一级水电站施工测量控制网设计、建网及首次观测计算资料（2022年）', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965781803073537', '1648881412493541377', '4、大渡河老鹰岩一级水电站施工测量控制网设计、建网及首次观测成果表（2022年）', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965781941485570', '1648881412493541377', '5、大渡河老鹰岩一级水电站施工测量控制网设计、建网及首次观测仪器检定资料（2022年）', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965782029565954', '1648881412493541377', '6、大渡河老鹰岩一级水电站施工测量控制网设计、建网及首次观测测量报告（2022年）', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965782121840642', '1648881412493541377', '7、大渡河老鹰岩一级水电站施工测量控制网设计、建网及首次观测-管理记录资料（2022年）', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965782260252673', '1648881412493541377', '8、 大渡河老鹰岩一级水电站施工测量控制网设计、建网及首次观测检查报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965782348333057', '1648881412493541377', '老鹰岩一二级水电站施工测量控制网总布置图', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965782436413441', '1648881412459986946', '1、大渡河老鹰岩二级水电站施工测量控制网设计、建网及首次观测技术设计书', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965782524493825', '1648881412459986946', '2、大渡河老鹰岩二级水电站施工测量控制网设计、建网及首次观测观测资料（2022年）', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965782612574209', '1648881412459986946', '3、大渡河老鹰岩二级水电站施工测量控制网设计、建网及首次观测计算资料（2022年）', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965782704848897', '1648881412459986946', '4、大渡河老鹰岩二级水电站施工测量控制网设计、建网及首次观测成果表（2022年）', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965782797123585', '1648881412459986946', '5、大渡河老鹰岩二级水电站施工测量控制网设计、建网及首次观测仪器检定资料（2022年）', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965782931341313', '1648881412459986946', '6、大渡河老鹰岩二级水电站施工测量控制网设计、建网及首次观测测量报告（2022年）', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965783019421698', '1648881412459986946', '7、大渡河老鹰岩二级水电站施工测量控制网设计、建网及首次观测-管理记录资料（2022年）', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965783111696385', '1648881412459986946', '8、 大渡河老鹰岩二级水电站施工测量控制网设计、建网及首次观测检查报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965783199776770', '1648881412459986946', '老鹰岩一二级水电站施工测量控制网总布置图', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654756751585312770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965783375937538', '1648881412107665410', '2 双江口水电站枢纽工程施工测量控制网2022年复测技术方案', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654763061269757953', NULL, '20230228李峰归档-', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965783514349569', '1648881412107665410', '3  2022年复测计算资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654763061269757953', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965783606624257', '1648881412107665410', '4  2022年复测成果表', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654763061269757953', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965783694704642', '1648881412107665410', '5  2022年复测仪器检定书', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654763061269757953', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965783782785025', '1648881412107665410', '6  2022年复测测量报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654763061269757953', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965783870865410', '1648881412107665410', '7  2022年复测质量检查报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654763061269757953', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965783958945793', '1648881412107665410', '2022年控制网复测外业观测资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654763061269757953', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965784051220481', '1648881412107665410', '双江口水电站2022年施控网复测管理记录料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654763061269757953', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965784189632514', '1648881412107665410', '双江口水电站施工测量控制网复测布置图(2022年复测)', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654763061269757953', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965784277712897', '1648881412107665410', '双江口施控网2022年复测资料移交单', '2022年', NULL, '8', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654763061269757953', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965784546148354', '1648881411885367297', '泸州市龙马潭区金龙胡市片区现代农业产业园区1：2000地形图测绘-测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317784865996802', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965784634228737', '1648881411885367297', '泸州市龙马潭区金龙胡市片区现代农业产业园区1：2000地形图测绘-管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317784865996802', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965784722309122', '1648881413730861058', '2022年西安路街道办事处老旧小区院落改造项目测绘工作激光扫描数据', '2022年', NULL, '7', 'las', NULL, NULL, NULL, NULL, NULL, NULL, '激光扫描', NULL, '1622860864798064641', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965784860721154', '1648881413730861058', '平面和立面图成果资料', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '激光扫描', NULL, '1649317785109266434', '2022-01-01 00:00:00', NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965784948801537', '1648881413730861058', '2022年西安路街道办事处老旧小区院落改造项目测绘工作技术总结', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317785109266434', '2022-01-01 00:00:00', '外单位文档资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965785041076225', '1648881413927993346', '黄河干流若尔盖段应急处置（抢险救灾）工程无人机数据', '2022年', NULL, '9', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机飞行', NULL, '1649317785272844289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965785175293954', '1648881413927993346', '黄河干流若尔盖段应急处置（抢险救灾）工程1：1000地形图测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机飞行', NULL, '1649317785365118977', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965785267568642', '1648881413927993346', '黄河干流若尔盖段辖曼1号料场及连接道路地形图（202201）1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, '0.055', 'km²', '无人机飞行', NULL, '1649317785365118977', NULL, '2000国家大地坐标系和-工程坐标系两套地形图成果', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965785355649025', '1648881413877661698', '宁南果木二期风电项目厂址区地形图（202203）1：2000', '2022年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317785620971521', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965785443729409', '1648881413877661698', '宁南果木二期风电项目航飞资料', '2022年', NULL, '9', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317785620971521', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965785540198401', '1648881413948964865', '大渡河猴子岩水电站地形图(含水下202201)1：1000', '2022年', '2', '2', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317785792937985', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965785783468033', '1648881413948964865', '猴子岩水电站地形测量无人机航飞资料', '2022年', '2', '9', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1649317785792937985', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965785884131330', '1648881413911216130', '老木孔航电枢纽工程航道整治测量-测绘报告', '2022年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1621042103266836481', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965785972211714', '1648881413911216130', '洪水点位成果表', '2022年', NULL, '16', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1621042103266836481', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965786064486401', '1648881413911216130', '岷江老木孔航电枢纽工程航道整治工程礁石区及码头地形图（202203）1：500', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, '25.77', 'km²', '无人机航飞', NULL, '1621042103266836481', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965786160955393', '1648881413911216130', '岷江老木孔航电枢纽工程航道整治工程江道图（含水下）地形图（202203）1：2000', '2022年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, '0.95', 'km²', '无人机航飞', NULL, '1621042103266836481', NULL, '缺纸质管理记录资料及无人机航飞资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965786345504769', '1649945025836744705', '大竹县城区地下管网普查项目', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944624336994306', NULL, '20220215云地公司归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965786437779458', '1654408468736245761', '成都高新区地下管线普查成果更新服务采购项目（包 2）高新西区保税区施工方案', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944624416686082', NULL, '202201张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965786525859842', '1654408468736245761', '成都市成华区规划和自然资源局地下管线普査成果更新项目（1、2、3包）专业技术设计书', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944624618012674', NULL, '202201张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965786618134530', '1649945025891270658', '彭州市规划和自然资源局彭州市1：500系列数字测绘产品生产服务项目技术设计书', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944624697704450', NULL, '202201张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965786714603521', '1648881413911216130', '老木孔航电枢纽工程航道整治测量无人机航飞', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1649944624995500033', NULL, '20220419刘媛媛归档第一部分原始数据', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965786869792769', '1648881413361762305', '四川省泸州市泸县(510521)2021年度国土变更调查数据库更新成果', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944625142300674', NULL, '20220421朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965786962067458', '1649945025908047873', '青海省海西蒙古族藏族自治州大柴旦行政委员会(632857)第三次全国国土调查成果资料', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944625226186754', NULL, '20220530夏夏归档（U盘密码密码13125019455）', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965787054342146', '1649945025908047873', '青海省海西蒙古族藏族自治州乌兰县(632821)第三次全国国土调查成果资料', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944625226186754', NULL, '20220530夏夏归档（U盘密码密码13125019455）', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965787142422529', '1648881413412093953', '牙根二级水电站可研阶段测绘(第一部分原始数据）激光', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944625427513345', NULL, '20220720李圆更新数据', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965787234697218', '1649945025924825090', '贵阳市自然资源确权', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944625503010818', NULL, '20221226吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965787326971906', '1649945025945796609', '佛山市季华路西延线工程（南海丹灶段）项目测量工程地籍及房产测绘工程报告', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944625586896897', NULL, '202208吴凯拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965787419246593', '1649945025958379521', '三台县河道管理范围划定项目成果资料', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944625683365890', NULL, '202208吴凯拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965787511521282', '1649945025958379521', '三台县河道管理范围划定项目二院交接清单', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944625683365890', NULL, '202208吴凯拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965787603795970', '1649945025975156737', '祥云财富工业园区有色金属循环产业园（一期）工程规划路工程测量技术设计书', '2022', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944625834360833', NULL, '202208吴凯拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965787691876354', '1649945025975156737', '祥云财富工业园区有色金属循环产业园（一期）工程规划路工程测量技术总结', '2022', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944625834360833', NULL, '202208吴凯拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965787784151041', '1649945025975156737', '祥云财富工业园区有色金属循环产业园（一期）工程规划路工程测量成果', '2022', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944625834360833', NULL, '202208吴凯拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965787876425730', '1649945025991933953', '管护数据', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626039881729', NULL, '20221011外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965787977089025', '1649945025991933953', '汇总表格', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626039881729', NULL, '20221011外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965788170027010', '1649945025991933953', '两区图件', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626039881729', NULL, '20221011外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965788346187777', '1649945025991933953', '其他资料', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626039881729', NULL, '20221011外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965788438462466', '1649945025991933953', '矢量数据', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626039881729', NULL, '20221011外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965788530737154', '1649945025991933953', '文档资料', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626039881729', NULL, '20221011外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965788623011842', '1649945025991933953', '栅格数据', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626039881729', NULL, '20221011外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965788715286530', '1649945026008711170', '设计书', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626526420994', NULL, '夏夏20220923归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965788807561217', '1649945026008711170', '工作总结', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626526420994', NULL, '夏夏20220923归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965788899835905', '1649945026008711170', '仪器鉴定证书', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626526420994', NULL, '夏夏20220923归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965789050830850', '1649945026008711170', 'DWG格式地形图数据', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626526420994', NULL, '夏夏20220923归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965789143105537', '1649945026008711170', '1：50000-1：100000地形图数据结合图', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626526420994', NULL, '夏夏20220923归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965789235380225', '1649945026008711170', '地类权属调查报告', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626526420994', NULL, '夏夏20220923归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965789327654913', '1649945026008711170', '用地红线土', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626526420994', NULL, '夏夏20220923归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965789436706818', '1649945026008711170', '验收报告', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626526420994', NULL, '夏夏20220923归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965789528981506', '1649945026008711170', '关于国家地震烈度速报与预警工程1：500地形和用地红线图测绘项目建设内容调整协商情况的函20220722', '2022', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626526420994', NULL, '夏夏20220923归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965789621256194', '1649945026008711170', '国家地震烈度速报与预警工程1：500地形和用地红线图测绘项目验收意见2022.9.22', '2022', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626526420994', NULL, '夏夏20220923归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965789713530882', '1649945026008711170', '国家级移交回执', '2022', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626526420994', NULL, '夏夏20220923归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965789805805569', '1649945026008711170', '国家项目地形图绘制点位表20181011（1）', '2022', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626526420994', NULL, '夏夏20220923归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965789893885954', '1649945026008711170', '国家项目红线图、地形图绘制点位表20181011（1）', '2022', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944626526420994', NULL, '夏夏20220923归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965789981966338', '1649945026042265602', '赣深1标复测数据', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944627843432450', NULL, '20221017朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965790074241026', '1649945026042265602', '赣深1标测量报告', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944627843432450', NULL, '20221017朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965790166515714', '1649945026042265602', '建网资料', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944627843432450', NULL, '20221017朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965790254596098', '1649945026059042817', '奥维地图', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944628183171073', NULL, '20221011吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965790346870786', '1649945026059042817', '报告', '2022', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944628183171073', NULL, '20221011吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965790497865730', '1649945026059042817', '报审表及评估意见和意见回复', '2022', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944628183171073', NULL, '20221011吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965790590140417', '1649945026059042817', '高程数据', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944628183171073', NULL, '20221011吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965790682415106', '1649945026059042817', '平面数据', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944628183171073', NULL, '20221011吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965790774689794', '1649945026075820034', '邻水县农村集体土地大比例尺图实测和确权登记发证项目（包二）成果数据', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944628728430594', NULL, '202211朱静归档（只考出来部分资料，硬盘在资料柜）', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965790862770177', '1648881412514512898', '广西壮族自治区桂林市资源县（马家站点）抽水蓄能电站地形地类图测绘报告', '2022', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1649944628875231233', NULL, '20221216杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965790955044865', '1648881412514512898', '资源县（马家站点）抽水蓄能电站地形地类图测绘管理记录资料', '2022', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1649944628875231233', NULL, '20221216杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965791043125249', '1648881412514512898', '广西资源县（马家站点）抽水蓄能电站地形地类图1：1000', '2022', '2', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1649944628875231233', NULL, '20221216杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965791135399938', '1648881412514512898', '广西资源抽水蓄能水电站三维地形面1：1000', '2022', NULL, '4', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1649944628875231233', NULL, '20221216杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965791227674625', '1648881412514512898', '广西资源抽水蓄能水电站数字正射影像图1：1000', '2022', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1649944628875231233', NULL, '20221216杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965791378669570', '1648881412514512898', '广西壮族自治区桂林市资源县（马家站点）抽水蓄能电站航飞资料', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1649944628875231233', NULL, '20221216杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965791470944258', '1648881412514512898', '广西壮族自治区桂林市资源县（马家站点）抽水蓄能电站航飞资料', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1649944628875231233', NULL, '20221216杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965791563218945', '1648881412296409090', '山西省沁水抽水蓄能电站可研阶段地形图测绘报告', '2022', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944629693120514', NULL, '20230403谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965791655493633', '1648881412296409090', '山西省沁水抽水蓄能电站可研阶段地形图测绘管理记录资料', '2022', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944629693120514', NULL, '20230403谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965791747768322', '1648881412296409090', '山西沁水抽水蓄能电站可研阶段工程区补测地形图1：2000', '2022', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944629693120514', NULL, '20230403谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965791835848706', '1648881412296409090', '山西沁水抽水蓄能电站可研阶段上水库地形图1：1000', '2022', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944629693120514', NULL, '20230403谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965791928123393', '1648881412296409090', '山西沁水抽水蓄能电站可研阶段下水库地形图1：1000', '2022', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944629693120514', NULL, '20230403谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965792020398082', '1648881412296409090', '山西省沁水抽水蓄能电站可研阶段地形图测绘航飞数据', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '成果数据', '1649944629693120514', NULL, '20230403谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1649965792116867074', '1648881412296409090', '山西省沁水抽水蓄能电站可研阶段地形图测绘航飞数据', '2022', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '原始数据', '1649944629693120514', NULL, '20230403谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650334576656777217', '1650334368212451330', '新建重庆至黔江铁路站前5标精测网第2、3、4次及6标2、3、4次复测成果', '2022', NULL, '8', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1598559186729041922', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403349011103745', '1648881413164630018', '8-16-2022C29-雅安市名山区百丈镇临溪河综合整治项目地形图测绘原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403349090795522', NULL, '20220524周强归档第一部分原始数据', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403349166292993', NULL, '8-24-2022C35-雅砻江柯拉乡光伏发电项目1：500地形图测绘原始数据激光', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403349233401857', NULL, '20220720李圆归档第一部分原始数据', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403349275344897', '1649945026096791553', '2、甘孜州洪水淹没图编制报告（流域汇总）', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403349401174018', NULL, '20221116外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403349447311361', '1649945026096791553', '3、各河流洪水淹没图编制报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403349401174018', NULL, '20221116外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403349589917698', '1649945026096791553', '4、洪水淹没图成图成果', '2022年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403349401174018', NULL, '20221116外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403349703163906', '1649945026096791553', '5、甘孜州洪水淹没图图层集合', '2022年', NULL, NULL, 'shp', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403349401174018', NULL, '20221116外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403349808021506', '1649945026096791553', '7、河流实测河道断面序列', '2022年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403349401174018', NULL, '20221116外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403349925462018', '1649945026096791553', '8、各河流淹没计算模型', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403349401174018', NULL, '20221116外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403350021931009', '1649945026096791553', '9、所采用的各站点设计洪水过程序列', '2022年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403349401174018', NULL, '20221116外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403350122594306', '1649945026096791553', '四川省水旱灾害风险普查领导小组办公室审查意见审核意见', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403349401174018', NULL, '20221116外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403350219063298', '1649945026096791553', '州级审核意见(1)(1)', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403349401174018', NULL, '20221116外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403350315532289', '1648881412313186305', '【邻水宅基地数据】二标', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944628728430594', NULL, '202211朱静归档（只考出来部分资料，硬盘在资料柜）', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403350412001281', '1648881412313186305', '丰禾镇模型', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944628728430594', NULL, '202211朱静归档（只考出来部分资料，硬盘在资料柜）', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403350508470274', '1648881412313186305', '三维模型（中程测绘）', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944628728430594', NULL, '202211朱静归档（只考出来部分资料，硬盘在资料柜）', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403350604939266', '1648881412313186305', '复盛乡模型', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944628728430594', NULL, '202211朱静归档（只考出来部分资料，硬盘在资料柜）', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403350697213954', '1648881412313186305', '袁市镇模型', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944628728430594', NULL, '202211朱静归档（只考出来部分资料，硬盘在资料柜）', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403350793682946', '1648881412313186305', '长滩乡模型', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649944628728430594', NULL, '202211朱静归档（只考出来部分资料，硬盘在资料柜）', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403350890151937', '1650387258763378689', '8-43-10包核查结果', '2022年', NULL, NULL, 'gdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403351007592450', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403351045341186', '1648881419619663874', '宝镜村、茅庵堂村、太三村、前龙村、隐逸山村', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403351116644354', NULL, '20221128吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403351150198785', '1648881414951403522', '2022无人机项目数据-2021C68-原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403351221501954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403351271833601', '1648881414951403522', '2022无人机项目数据-2021C68-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403351221501954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403351372496897', '1648881412795531265', '2022机载激光雷达数据（新设备）归档文件夹-2022C43-原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403351221501954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403351573823490', '1648881412795531265', '2022机载激光雷达数据（新设备）归档文件夹-2022C43-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403351221501954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403351674486785', '1648881412795531265', '金沙江上游叶巴滩抽水蓄能电站输水路线及发电厂房地形图1：5000-2022年11月24补图后', '2022年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403351221501954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403351779344386', '1648881414951403522', '金沙江上游清洁能源基地叶巴滩抽水蓄能电站拉哇库尾地形图1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403351221501954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403351959699457', '1648881412795531265', '2021C68.2022C43  四川省 西藏自治区金沙江上游清洁能源基地叶巴滩抽水蓄能电站测绘技术服务——测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403351221501954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403352056168449', '1648881412795531265', '2021C68.2022C43 四川省 西藏自治区金沙江上游清洁能源基地叶巴滩抽水蓄能电站测绘技术服务——管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403351221501954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403352148443137', '1648881414951403522', '4-金沙江上游清洁能源基地叶巴滩抽水蓄能电站上库进、出水口区域实景三维模型1：1000', '2022年', '2', '3', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403351221501954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403352240717826', '1648881412795531265', '5-金沙江上游清洁能源基地叶巴滩抽水蓄能电站三维地形面1：1000', '2022年', '2', '4', 'stl', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403351221501954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403352337186818', '1648881414951403522', '6-金沙江上游清洁能源基地叶巴滩抽水蓄能电站叶巴滩坝址~拉哇坝址1：1000大断面测量', '2022年', '2', '16', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403351221501954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403352433655810', '1648881412795531265', '7-金沙江上游清洁能源基地叶巴滩抽水蓄能电站枢纽平面布置图坐标转换', '2022年', NULL, '16', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403351221501954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403352538513409', '1648881415911899138', '叶巴滩水电站坝址地形图（老图修、补测）（补测已接边）全部（含原坝址1000地形图）-CGCS2000', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403351221501954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403352639176706', '1648881413244321794', '8-49-2022C23-江油抽水蓄能电站预可阶段测绘工作-激光-原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403352836308994', NULL, '20221216杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403352878252034', '1648881413244321794', '8-49-2022C23-江油抽水蓄能电站预可阶段测绘工作-激光-成果数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403352836308994', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403352978915330', '1648881413244321794', '四川省江油县抽水蓄能电站（负荷侧）预可研阶段二次选址工程区地形图1：5000', '2022年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403352836308994', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403353075384322', '1648881413244321794', '四川省江油县抽水蓄能电站（负荷侧）预可研阶段二次选址工程区三维地形面1：5000', '2022年', '4', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403352836308994', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403353167659009', '1648881413244321794', '四川省江油县抽水蓄能电站（负荷侧）预可研阶段二次选址上下库、输水线路地形地类图1：2000', '2022年', '3', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403352836308994', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403353276710914', '1648881413244321794', '四川省江油县抽水蓄能电站（负荷侧）预可研阶段二次选址上下库、输水线路三维地形面1：2000', '2022年', '3', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403352836308994', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403353377374209', '1648881413244321794', '四川省江油县抽水蓄能电站（负荷侧）预可研阶段二次选址测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403352836308994', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403353482231810', '1648881413244321794', '2022C23-江油抽水蓄能电站预可阶段测绘工作-管理记录资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403352836308994', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403353578700801', '1648881420227837954', '泸县第三次国土调查数据库质量检查报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403353683558401', '1648881420227837954', '泸县第三次全国国土调查成果分析报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403353784221697', '1648881420227837954', '泸县第三次全国国土调查成果清理承诺书', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403353884884993', '1648881420227837954', '泸县第三次全国国土调查城镇村庄土地利用状况分析报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403353977159682', '1648881420227837954', '泸县第三次全国国土调查工作报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403354077822977', '1648881420227837954', '泸县第三次全国国土调查技术报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403354170097666', '1648881420227837954', '泸县第三次全国国土调查数据库建设报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403354266566658', '1648881420227837954', '泸县第三次全国国土调查专项用地调查报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403354363035650', '1648881420227837954', '泸县城镇土地利用现状图', '2022年', NULL, '2', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403354459504642', '1648881420227837954', '泸县耕地坡度分级专题图', '2022年', NULL, '2', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403354551779329', '1648881420227837954', '泸县耕地细化调查专题图', '2022年', NULL, '2', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403354656636930', '1648881420227837954', '泸县土地利用现状图', '2022年', NULL, '2', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403354753105921', '1648881413361762305', '四川省泸州市泸县(510521)2021年度国土变更调查数据库更新成果', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403354853769217', '1648881413361762305', '“互联网+”举证成果', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403354950238210', '1648881413361762305', '其他资料', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403355046707202', '1648881413361762305', '更新数据包', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403355147370497', '1648881413361762305', '数据库检查结果', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403355294171138', '1648881413361762305', '2021泸县(510521)土地利用变化情况分析报告', '2022年', NULL, '8', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403355386445826', '1648881413361762305', '“临时用地”土地审批资-扫描', '2022年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403355491303425', '1648881411688235010', '510521泸县2021年度耕地进出平衡数据库.gdb', '2022年', NULL, NULL, 'gdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403353650003969', NULL, '20221226朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403355646492673', '1648881411986030594', '2022W39海南省全岛地形变化较大区域、漏洞区域机载LIDAR数据获取技术服务项目-仪器检定资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403355717795842', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403355755544577', '1648881411986030594', '2022W39海南省全岛地形变化较大区域、漏洞区域机载LIDAR数据获取技术服务项目-检查报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403355717795842', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403355852013570', '1648881411986030594', '2022W39海南省全岛地形变化较大区域、漏洞区域机载LIDAR数据获取技术服务项目-技术总结', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403355717795842', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403355944288258', '1648881411986030594', '2022W39海南省全岛地形变化较大区域、漏洞区域机载LIDAR数据获取技术服务项目-技术设计书', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403355717795842', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403356044951553', '1648881411986030594', '2022W39海南省全岛地形变化较大区域、漏洞区域机载LIDAR数据获取技术服务项目-管理记录资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403355717795842', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403356145614850', '1648881411986030594', '2022W39海南省全岛地形变化较大区域、漏洞区域机载LIDAR数据获取技术服务项目第一部分-原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403355717795842', NULL, '20221216李圆归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403356263055361', '1648881412715839489', '8-52-2022C47石棉县双家沟地形图测绘无人机-第一部分-原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403356481159169', NULL, '20230327李敏归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403356518907906', '1648881412715839489', '8-52-2022C47石棉县双家沟地形图测绘无人机-第二部分-成果数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403356481159169', NULL, '20230327李敏归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403356623765505', '1648881412715839489', '四川省石棉县双家沟地形图（202206）1：500', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403356481159169', NULL, '20230327李敏归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403356720234497', '1648881412715839489', '四川省石棉县双家沟地形图（202206）1：2000', '2022年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403356481159169', NULL, '20230327李敏归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403356825092097', '1648881412715839489', '2022C47石棉县双家沟地形图测绘-测绘报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403356481159169', NULL, '20230327李敏归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403356921561089', '1648881412715839489', '2022C47石棉县双家沟地形图测绘-管理记录资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403356481159169', NULL, '20230327李敏归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403357018030082', '1648881412631953410', '第一部分-原始数据-无人机', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403357110304770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403357143859202', '1648881412631953410', '第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403357110304770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403357244522498', '1648881412631953410', '四川省雅砻江孟底沟水电站张牙沟35KV变电站、民爆器材库地形图测绘报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403357110304770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403357340991490', '1648881412631953410', '雅砻江孟底沟水电站张牙沟民爆器材库及专用路地形图(202207)1：500', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403357110304770', NULL, '工程坐标系及2000坐标系两套成果', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403357433266177', '1648881412631953410', '雅砻江孟底沟水电站张牙沟35kV变电站地形图(202207)1：500', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403357110304770', NULL, '工程坐标系及2000坐标系两套成果', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403357525540865', '1648881412631953410', '雅砻江孟底沟水电站施工阶段5#隧洞施工支洞现状纵剖面', '2022年', NULL, '14', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403357110304770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403357622009857', '1648881412631953410', '雅砻江孟底沟水电站施工阶段5#隧洞施工支洞现状横剖面', '2022年', NULL, '14', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403357110304770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403357768810497', '1648881412631953410', '7-三维模型成果', '2022年', NULL, '3', 'dxf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403357110304770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403357873668098', '1648881412074110977', '第一部分-原始数据-激光', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403357961748481', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403357999497218', '1648881412074110977', '第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403357961748481', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403358108549121', '1648881412074110977', '2022C73 广东省云浮市云安区都杨镇牛栏坑绿色建材项目测绘-测绘报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403357961748481', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403358263738370', '1648881412074110977', '2022C73 管理记录资料 ', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403357961748481', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403358360207361', '1648881412074110977', '广东省云浮市云安区都杨镇牛栏坑绿色建材项目矿区和生产加工区地形图1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403357961748481', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403358456676354', '1648881411847618561', '第一部分-原始数据-无人机', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403358527979522', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403358574116865', '1648881411847618561', '第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403358527979522', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403358712528897', '1648881411847618561', '2022C80 猴子岩外部供水及料场地形图测绘-测绘报告-3.15', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403358527979522', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403358808997889', '1648881411847618561', '2022C80 猴子岩外部供水及料场地形图测绘-管理记录资料-0315', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403358527979522', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403358905466881', '1648881411847618561', '7-三维模型成果', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403358527979522', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403358997741570', '1648881411847618561', '大渡河猴子岩水电站外部供水1、2料场地形图1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403358527979522', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403359090016258', '1648881411847618561', '大渡河猴子岩水电站外部供水沉沙池及取水口地形图1：500', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403358527979522', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403359186485250', '1648881411847618561', '大渡河猴子岩水电站外部供水左岸引水线路带状地形图1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403358527979522', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403359278759938', '1648881412002807809', '第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403359350063106', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403359396200449', '1648881412002807809', '第一部分-原始数据-激光', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403359350063106', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403359534612482', '1648881412002807809', '2022C75大渡河长河坝抽水蓄能预可阶段测绘-测绘报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403359350063106', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403359631081474', '1648881412002807809', '2022C75大渡河长河坝抽水蓄能预可阶段测绘-管理记录资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403359350063106', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403359731744770', '1648881412002807809', '大渡河长河坝抽水蓄能水电站预可阶段坝址区地形图1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403359350063106', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403359824019458', '1648881412002807809', '大渡河长河坝抽水蓄能水电站预可阶段坝址区三维地形面1：1000', '2022年', '2', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403359350063106', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403359924682754', '1648881412002807809', '大渡河长河坝抽水蓄能水电站预可阶段库区、引水线路、厂房系统地形图1：2000', '2022年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403359350063106', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403360021151746', '1648881412002807809', '大渡河长河坝抽水蓄能水电站预可阶段库区、引水线路、厂房系统三维地形面1：2000', '2022年', '3', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403359350063106', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403360159563778', '1648881412552261633', '第一部分-原始数据-激光', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403360226672642', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403360272809986', '1648881412552261633', '第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403360226672642', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403360411222018', '1648881412552261633', '2022C56新疆维吾尔自治区博州新华水力发电有限公司博州10万千瓦储热型光热配建90万千瓦新能源项目地形图测绘-测绘报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403360226672642', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403360503496706', '1648881412552261633', '2022C56新疆维吾尔自治区博州新华水力发电有限公司博州10万千瓦储热型光热配建90万千瓦新能源项目地形图测绘-测管理记录资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403360226672642', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403360604160001', '1648881412552261633', '博州10万千瓦储热型光热配建90万千瓦新能源1：500地形图成果', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403360226672642', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403360700628993', '1648881412153802753', '2022-C70广东台山黄茅岗抽水蓄能电站工程区1：1000地形图测绘-机载激光雷达数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403360771932161', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403360805486594', '1648881412153802753', '2022-C70广东台山黄茅岗抽水蓄能电站工程区1：1000地形图测绘-机载激光雷达数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403360771932161', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403360901955586', '1648881412153802753', '2022-C70广东台山黄茅岗抽水蓄能电站工程区1：1000地形图测绘-无人机项目数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403360771932161', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403360994230274', '1648881412153802753', '2022-C70广东台山黄茅岗抽水蓄能电站工程区1：1000地形图测绘-无人机项目数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403360771932161', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403361090699265', '1648881412153802753', '2022C70 广东台山黄茅岗抽水蓄能电站工程区1：1000地形图测绘报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403360771932161', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403361229111298', '1648881412153802753', '2022C70广东台山黄茅岗抽水蓄能电站工程区1：1000地形图管理记录资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403360771932161', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403361325580289', '1648881412153802753', '广东台山黄茅岗抽水蓄能电站工程区地形图1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403360771932161', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403361413660673', '1648881412153802753', '三维地形面成果数据', '2022年', '2', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403360771932161', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403361505935361', '1648881412153802753', '正射影像成果数据', '2022年', '2', '1', 'tif', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403360771932161', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403361602404353', '1648881412204134402', '第一部分-原始数据-激光', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403361669513217', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403361703067650', '1648881412204134402', '第二部分-成果文件-激光', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403361669513217', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403361803730946', '1648881412204134402', '2022C68 屏山抽水蓄能电站西村站址地形图测绘-测绘报告 ', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403361669513217', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403361896005633', '1648881412204134402', '2022C68 屏山抽水蓄能电站西村站址地形图-管理记录资料 ', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403361669513217', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403361996668930', '1648881412204134402', '四川省宜宾市屏山抽水蓄能电站西村站址工程区地形图1：2000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403361669513217', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403362097332225', '1648881412204134402', '四川省宜宾市屏山抽水蓄能电站西村站址工程区地形图1：5000', '2022年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403361669513217', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403362235744258', '1648881412204134402', '四川省宜宾市屏山抽水蓄能电站西村站址工程区三维地形面1：2000', '2022年', '2', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403361669513217', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403362332213249', '1648881412204134402', '四川省宜宾市屏山抽水蓄能电站西村站址工程区三维地形面1：5000', '2022年', '4', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403361669513217', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403362432876546', '1648881411826647041', '激光点云项目数据第一部分-原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403362525151234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403362562899970', '1648881411826647041', '激光点云项目数据第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403362525151234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403362663563265', '1648881411826647041', '无人机项目数据第一部分-原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403362525151234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403362764226561', '1648881411826647041', '无人机项目数据第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403362525151234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403362982330370', '1648881411826647041', '四川省宜宾市蟠龙抽水蓄能电站工程区地形图 1：2000', '2022年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403362525151234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403363078799361', '1648881411826647041', '四川省宜宾市蟠龙抽水蓄能电站工程区三维地形面 1：2000', '2022年', '3', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403362525151234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403363171074049', '1648881411826647041', '2022C81四川省宜宾蟠龙抽水蓄能电站地形图-测绘报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403362525151234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403363267543041', '1648881411826647041', '2022C81四川省宜宾蟠龙抽水蓄能电站地形图测绘-管理记录资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403362525151234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403363364012033', '1648881413483397121', '2022C16-楞古水电站预可阶段-无人机飞行归档资料-第一部分-原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403363435315201', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403363481452545', '1648881413483397121', '2022C16-楞古水电站预可阶段-无人机飞行归档资料-第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403363435315201', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403363661807617', '1648881413483397121', '2022C16 雅砻江楞古水电站预可阶段测绘技术服务 测绘报告202200906', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403363435315201', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403363800219649', '1648881413483397121', '2022C16 雅砻江楞古水电站预可阶段测绘技术服务 管理记录资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403363435315201', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403363926048769', '1648881413483397121', 'CD186-YK-13-10（8）牙根二级施工永久用地范围图坐标转换', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403363435315201', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403364022517761', '1648881413483397121', '附图6-28楞古闸坝水电站枢纽平面总布置图（方案二）转成矢量图', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403363435315201', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403364114792450', '1648881413483397121', '楞古施工总布置 楞古的上、中坝址轴线坐标转换', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403363435315201', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403364207067138', '1648881413483397121', '雅砻江管理范围线转CAD坐标转换', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403363435315201', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403364307730434', '1648881413483397121', '1-雅砻江楞古水电站中坝址~楞古上坝址地形图(含水下202204)1：2000', '2022年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403363435315201', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403364412588033', '1648881413483397121', '雅砻江楞古水电站减水河段跌水地形图（含水下202204）1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403363435315201', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403364509057025', '1648881413483397121', '雅砻江楞古水电站马蹄村至马蹄村以下4Km河段水下地形图(202204)1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403363435315201', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403364609720322', '1648881413483397121', '雅砻江楞古水电站木灰沟口至楞古上坝址河段水下地形图(202204)1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403363435315201', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403364701995010', '1648881413483397121', '雅砻江楞古水电站宋玉沟汇口以上0.5Km至1.5Km河段水下地形图(202204)1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403363435315201', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403364802658305', '1648881413483397121', '4-雅砻江楞古水电站上坝址至孟底沟库尾1：1000大断面', '2022年', NULL, '14', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403363435315201', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403364899127297', '1648881413483397121', '5-雅砻江楞古水电站力丘河汇口以上1：1000大断面', '2022年', NULL, '14', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403363435315201', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403364995596289', '1648881411809869825', '第一部分-原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403365066899457', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403365125619713', '1648881411809869825', '第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403365066899457', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403365255643137', '1648881411809869825', 'HT 综合库房1：2000地形图', '2022年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403365066899457', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403365352112130', '1648881411809869825', 'HT道路1：5000地形图', '2022年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403365066899457', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403365444386818', '1648881411809869825', 'HT洞库1：2000地形图', '2022年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403365066899457', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403365540855809', '1648881411809869825', 'HT洞库1：5000地形图', '2022年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403365066899457', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403365641519106', '1648881411809869825', 'HT综合库房1：5000地形图', '2022年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403365066899457', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403365742182402', '1648881411809869825', '2022C82HT项目地形图测绘-测绘报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403365066899457', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403365901565953', '1648881411809869825', '2022C82HT项目地形图测绘-管理记录资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403365066899457', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403366002229249', '1648881412346740737', '2022机载激光雷达数据（新设备）归档文件夹第一部分-原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403366077726721', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403366111281153', '1648881412346740737', '2022机载激光雷达数据（新设备）归档文件夹第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403366077726721', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403366228721666', '1648881412346740737', '2022无人机项目数据第一部分-原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403366077726721', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403366325190657', '1648881412346740737', '2022无人机项目数据第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403366077726721', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403366425853954', '1648881412346740737', '河北省沙河市东石岭抽水蓄能水电站左、右岸方案范围地形图测绘报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403366077726721', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403366526517249', '1648881412346740737', '河北省沙河市东石岭抽水蓄能水电站左、右岸方案范围地形图测绘管理记录资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403366077726721', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403366627180546', '1648881412346740737', '河北省沙河市东石岭抽水蓄能水电站右岸方案范围地形地类图(含水下)1：2000', '2022年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403366077726721', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403366765592577', '1648881412346740737', '河北省沙河市东石岭抽水蓄能水电站右岸方案范围三维地形面1：2000', '2022年', '3', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403366077726721', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403366862061570', '1648881412346740737', '河北省沙河市东石岭抽水蓄能水电站左岸方案范围地形图(含水下)1：5000', '2022年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403366077726721', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403366966919169', '1648881412346740737', '河北省沙河市东石岭抽水蓄能水电站左岸方案范围三维地形面1：5000', '2022年', '4', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403366077726721', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403367067582465', '1648881412845862913', '2022机载激光雷达数据（新设备）归档文件夹第一部分-原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403367138885634', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403367172440065', '1648881412845862913', '2022机载激光雷达数据（新设备）归档文件夹第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403367138885634', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403367268909057', '1648881412845862913', '2022无人机项目数据第一部分-原始数据', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403367138885634', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403367365378049', '1648881412845862913', '2022无人机项目数据第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650403367138885634', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403367461847042', '1648881412845862913', '2022C39-奔戈、南桠光伏发电项目地形图测绘工作-测绘报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403367138885634', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403367562510338', '1648881412845862913', '2022C39-奔戈、南桠光伏发电项目地形图测绘工作-测绘管理记录资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403367138885634', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403367658979329', '1648881412845862913', '2022C39-四川省奔戈、南桠光伏发电项目集电线路1：2000地形图（正式图）-CGCS2000', '2022年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403367138885634', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403367755448321', '1648881412845862913', '2022C39-四川省奔戈光伏发电项目场址1：2000地形图（正式图）-CGCS2000', '2022年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403367138885634', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403367851917313', '1648881411965059074', '第一部分-原始数据-激光', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403367931609090', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403367965163522', '1648881411965059074', '第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403367931609090', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403368065826817', '1648881411965059074', '2022C76 芦山县市政公园恢复及重建工程项目地形图测绘-测绘报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403367931609090', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403368158101505', '1648881411965059074', '2022C76 芦山县市政公园恢复及重建工程项目地形图测绘-管理记录资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403367931609090', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403368258764801', '1648881411965059074', '四川省芦山县市政公园恢复及重建工程项目罗纯山公园地形图1：500', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403367931609090', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403368443314178', '1648881411965059074', '四川省芦山县市政公园恢复及重建工程项目雨水公园地形图1：500', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403367931609090', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403368539783170', '1648881412594204674', '2022C54 攀枝花三峡光伏发电项目地形图测绘报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403368623669250', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403368657223682', '1648881412594204674', '2022C54 攀枝花三峡光伏发电项目地形图管理记录资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403368623669250', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403368749498369', '1648881412594204674', '第一部分-原始数据-激光', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403368623669250', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403368841773058', '1648881412594204674', '第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403368623669250', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403368942436354', '1648881412594204674', '四川省攀枝花三峡光伏发电项目地形图1：500', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403368623669250', NULL, '两套坐标系', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403369089236994', '1648881412594204674', '四川省攀枝花三峡光伏发电大龙潭地形图-正式图（CGCS2000-102°）', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403368623669250', NULL, '两套坐标系', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403369236037634', '1648881412594204674', '四川省攀枝花三峡光伏发电大田1#地形图-正式图（CGCS2000-102°）', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403368623669250', NULL, '两套坐标系', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403369340895234', '1648881412594204674', '四川省攀枝花三峡光伏发电大田2#地形图-正式图（CGCS2000-102°）', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403368623669250', NULL, '两套坐标系', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403369445752833', '1648881412594204674', '四川省攀枝花三峡光伏发电大田升压站备选地形图--正式图（CGCS2000-102°）', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403368623669250', NULL, '两套坐标系', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403369538027522', '1648881412594204674', '四川省攀枝花三峡光伏发电大田升压站主选 地形图--正式图（CGCS2000-102°）', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403368623669250', NULL, '两套坐标系', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403369638690817', '1648881412665507842', '2022C50 老鹰岩水电站支流1：1000水下地形图测绘及松林河南桠河大断面测量-测绘报告', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403369714188290', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403369747742721', '1648881412665507842', '2022C50 老鹰岩水电站支流1：1000水下地形图测绘及松林河南桠河大断面测量-管理记录资料', '2022年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403369714188290', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403369852600321', '1648881412665507842', '大渡河老鹰岩水电站支流南桠河上游水下地形图（202207）1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403369714188290', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403369944875009', '1648881412665507842', '大渡河老鹰岩水电站支流南桠河下游水下地形图（202207）1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403369714188290', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403370041344002', '1648881412665507842', '大渡河老鹰岩水电站支流松林河上游水下地形图（202207）1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403369714188290', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403370137812994', '1648881412665507842', '大渡河老鹰岩水电站支流松林河下游水下地形图（202207）1：1000', '2022年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650403369714188290', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403370230087681', '1648881412665507842', '第一部分-原始数据-激光', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403369714188290', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650403370322362369', '1648881412665507842', '第二部分-成果文件', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光雷达', NULL, '1650403369714188290', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768862241357825', '1648881515937660929', '2017-昭苏县2017年度农村土地承包经营权确权登记颁证项目质检站验收报告', '2021年', NULL, '8', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768862312660993', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768862392352769', '1654408468736245761', '成都高新技术产业开发区发展改革和规划管理局成都高新区地下管线普查成果更新服务采购项目（包2）物探方法实验于仪器一致性报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768862467850242', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768862509793282', '1648881516004769793', '31121工程DQ河河道测量技术总结报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768862581096450', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768862627233794', '1648881516004769793', '横断面资料', '2021年', '1', '14', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768862581096450', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768862744674305', '1648881516004769793', '纵断面资料', '2021年', NULL, '14', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768862581096450', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768862912446466', '1648881516034129922', '科技项目可行性研究报告（成勘院测绘公司0519上报）-v1', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768862983749634', NULL, '20210625-张进', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768863025692673', '1648881516034129922', '西藏羊湖抽水蓄能电站压力钢管监测控制网系统汇报20210421', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768862983749634', NULL, '20210625-张进', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768863126355970', '1648881516034129922', '项目答辩20210623', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768862983749634', NULL, '20210625-张进', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768863222824962', '1648881516034129922', '项目可行性20210623', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768862983749634', NULL, '20210625-张进', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768863315099649', '1648881516067684353', '洪柳西公服二项目地下管线探测成果图', '2021年', NULL, '2', 'dwg/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768863382208513', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768863428345857', '1648881516067684353', '洪柳西公服一项目地下管线探测成果图', '2021年', NULL, '2', 'dwg/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768863382208513', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768863520620545', '1648881516067684353', '洪柳西公服一项目和二项目地下管线探测成果报告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768863382208513', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768863621283841', '1648881516067684353', '洪柳西公服一项目结算资料', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768863382208513', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768863726141441', '1648881516067684353', '洪柳西公服二项目结算资料', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768863382208513', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768863822610434', '1648881516105433090', '南网数研院航飞影像服务建设项目粤北（河源、韶关、清远、肇庆）标包-验收证书', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768863889719297', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768863927468033', '1648881516105433090', '南网数研院航飞影像服务建设项目粤西（湛江，茂名，阳江，云浮）标包-验收证书', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768863889719297', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768864019742721', '1648881516138987521', '四川省新津县第三次全国国土调查监理监理报告', '2020年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768864086851586', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768864128794626', '1648881516138987521', '四川省新津县第三次全国国土调查监理检查记录', '2020年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768864086851586', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768864225263618', '1648881516138987521', '四川省新津县第三次全国国土调查监理日志', '2020年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768864086851586', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768864313344002', '1654408468736245761', '成都市邛崃市地下管线普查项目方法试验及一致性检验报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768864380452865', NULL, '20210714张进提交', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768864418201602', '1648881516172541954', '方法试验及一致性检验报告（封面）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768864380452865', NULL, '20210714张进提交', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768864510476290', '1654408468736245761', '邛崃市地下管线普查成果更新探测服务项目技术设计——送审稿', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768864380452865', NULL, '20210714张进提交', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768864602750977', '1648881516206096386', '500地形图专项咨询报告（巴彭、彭酉）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768864669859841', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768864707608577', '1648881516206096386', '500地形图专项咨询报告（武道线）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768864669859841', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768864799883266', '1648881516239650818', '冕宁县城市总体规划（2014-2030）中心城区土地使用规划图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768864871186433', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768864904740866', '1648881516273205250', '登记通知（可在重庆范围内测绘）', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768864971849730', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768865009598466', '1648881516273205250', '重庆市测绘成果目录汇交凭证2021.4.19', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768864971849730', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768865106067457', '1648881516273205250', '重庆市测绘成果质量检查意见表（重庆市开州区移民新城供水项目（鲤鱼塘水库）泄洪河道及引水渠道综合治理工程）', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768864971849730', NULL, '重庆市测绘产品质量检验测试中心', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768865194147842', '1648881516306759682', '红原县规模以下河流管理保护范围划界服务采购项目技术服务合同数据入库预检意见（全）2021.6.25   ', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865257062401', NULL, '四川省第二测绘地理信息工程院', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768865294811138', '1648881516306759682', '眉山东部新城起步区1：500地形图D级GPS测量四等水准测量检验报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865257062401', NULL, '四川省测绘产品质量监督检验站', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768865391280129', '1648881516306759682', '雅安名山区河湖划界入库预检意见2021.6.25 ', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865257062401', NULL, '四川省第二测绘地理信息工程院', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768865491943426', '1648881516306759682', '古蔺县宝沅河、大寨河、椒坪河、蟠龙河、同民河、西门河、震东河河道管理范围划定成果验收鉴定书2021.9.9', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865257062401', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768865705852929', '1648881516340314114', '2021年汛期安全生产会会议纪要 ', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865781350402', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768865810710529', '1648881516340314114', '关于中大型水电工程坐标系设置及使用的说明', '2020年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865781350402', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768865907179522', '1654408468736245761', '成都市管线普查仪器一致性及方法试验报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865974288386', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768866012037121', '1648881516378062850', '工作计划', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865974288386', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768866100117505', '1648881516378062850', '开工申请报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865974288386', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768866192392194', '1654408468736245761', '武侯区地下管线普查成果更新探测服务项目技术设计——送审稿', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865974288386', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768866284666882', '1654408468736245761', '20211124关于武侯区地下管线普查成果更新探测工作检查结果的整改报告（中水）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865974288386', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768866385330178', '1648881516378062850', '附件1——技术设计书（单面打印3份，胶装）', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865974288386', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768866481799170', '1648881516378062850', '附件2——投入设备清单', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865974288386', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768866569879553', '1648881516378062850', '附件2——仪器校验证书', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865974288386', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768866666348545', '1648881516378062850', '附件3——工作计划（13）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865974288386', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768866779594754', '1648881516378062850', '附件3——工作计划（17）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865974288386', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768866876063746', '1648881516378062850', '整改记录表', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768865974288386', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768866968338434', '1648881516407422977', '直孔监测控制网复测资料递交单20200420', '2021年', NULL, '8', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867031252993', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768867069001729', '1648881516407422977', '直孔水电站监测控制网复测及工作基点校测项目的必要性理由20210416', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867031252993', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768867152887809', '1648881516407422977', '直孔水电站监测控制网复测技术设计文件0412（送审稿）', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867031252993', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768867240968194', '1648881516440977410', '天星坝水库控制网设计、建网及首期观测埋点照片', '2021年', NULL, '8', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867299688449', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768867333242882', '1648881419514806274', '成都市东西轴线（绕城以东段）项目地形图补测1：500（单张）', '2019年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867396157441', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768867429711874', '1648881419514806274', '成都市东西轴线（绕城以东段）项目地形图1：500 (单张)', '2019年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867396157441', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768867517792258', '1648881419514806274', '成都市东西轴线（绕城以东段）项目地形图1：2000（单张）', '2019年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867396157441', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768867652009985', '1648881419514806274', '技术总结', '2019年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867396157441', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768867744284674', '1648881419514806274', '四等GNSS控制成果（含点之记）', '2019年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867396157441', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768867836559362', '1648881419514806274', '仪器检定资料', '2019年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867396157441', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768867928834049', '1648881419514806274', '专业技术设计书', '2019年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867396157441', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768868016914434', '1648881419514806274', '质量检查报告', '2019年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867396157441', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768868109189122', '1648881419514806274', '成都市城市东西轴线（绕城以东段）项目测绘服务补充协议部分结算审核报告书（定稿）2021.7.23', '2019年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867396157441', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768868205658114', '1648881419514806274', '成都市城市东西轴线（绕城以东段）项目测绘服务后续零星测绘结算审核报告书（定稿）2021.7.23', '2019年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867396157441', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768868297932801', '1648881419514806274', '成都市东西轴线补充协议结算书2020.6.22', '2019年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867396157441', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768868402790402', '1648881419514806274', '成都市东西轴线合同零星工作结算书2020.6.22', '2019年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768867396157441', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768868495065089', '1648881516508086274', '陈尚云参加中国电力数字工程第一届技能大赛照片', '2021年', NULL, '8', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768868562173953', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768868616699906', '1648881516508086274', '孟底沟水电站伍须海-上团乡-孟底沟通乡公路大修工程测量控制点交桩记录表2021.10.19 ', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768868562173953', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768868847386626', '1648881516508086274', '重庆永川区城市供水管线补勘补测项目质量检查表', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768868562173953', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768868989992961', '1648881516541640705', '武汉大学学历证明扫描件20211011谭君、陈尚云、何先宁、黄明、李旭、刘非、刘光庆、冉洪芳、饶兴贵、王渊、向发廷（共11人）', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869078073346', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768869115822082', '1648881516575195138', '绰斯甲河河道管理范围线桩牌移交证书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768869212291073', '1648881516575195138', '东谷河河道管理范围线桩牌移交证书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768869304565762', '1648881516575195138', '革什扎河河道管理范围线桩牌移交证书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768869401034754', '1648881516575195138', '松林河河道管理范围线桩牌移交证书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768869497503746', '1648881516575195138', '田湾河河道管理范围线桩牌移交证书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768869585584129', '1648881516575195138', '小金川河道管理范围线桩牌移交证书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768869669470209', '1648881516575195138', '1四川省绰斯甲河甘孜藏族自治州段河湖管理范围划定报告及附件基本控制网点之记', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768869757550594', '1648881516575195138', '2四川省东谷河甘孜藏族自治州段河湖管理范围划定报告及附件基本控制网点之记', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768869845630977', '1648881516575195138', '3四川省革什扎河甘孜藏族自治州段河湖管理范围划定报告及附件基本控制网点之记', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768869933711361', '1648881516575195138', '4四川省松林河甘孜藏族自治州段河湖管理范围划定报告及附件基本控制网点之记', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768870025986050', '1648881516575195138', '5四川省田湾河甘孜藏族自治州段河湖管理范围划定报告及附件基本控制网点之记', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768870114066434', '1648881516575195138', '6四川省小金川甘孜藏族自治州段河湖管理范围划定报告及附件基本控制网点之记', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768870202146818', '1648881516575195138', '四川省甘孜藏族自治州绰斯甲河、革什扎河、东谷河、小金川、田湾河、松林河河道管理范围划定专业技术设计书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768870294421505', '1648881516575195138', '四川省甘孜藏族自治州绰斯甲河、革什扎河、东谷河、小金川、田湾河、松林河河道管理范围划定测绘专业技术总结', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768870382501889', '1648881516575195138', '四川省甘孜藏族自治州绰斯甲河、革什扎河、东谷河、小金川、田湾河、松林河河道管理范围划定检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768870470582274', '1648881516575195138', '四川省绰斯甲河甘孜藏族自治州段河湖管理范围划定实施方案', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768870554468353', '1648881516575195138', '四川省东谷河甘孜藏族自治州段河湖管理范围划定实施方案', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768870638354434', '1648881516575195138', '四川省革什扎河甘孜藏族自治州段河湖管理范围划定实施方案', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768870726434818', '1648881516575195138', '四川省松林河甘孜藏族自治州段河湖管理范围划定实施方案', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768870856458242', '1648881516575195138', '四川省田湾河甘孜藏族自治州段河湖管理范围划定实施方案', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768870952927233', '1648881516575195138', '四川省小金川甘孜藏族自治州段湖管理范围划定实施方案 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768869178736642', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768871120699393', '1648881516575195138', '7-55-绰斯甲河、东谷河、革什扎河、小金川、松林河、田湾河成果数据', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '成果数据', '1650768871854702593', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768871900839937', '1654408468589445121', '四川省广元市苍溪县拱桥河河湖管理范围划定测绘成果质量检验报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768872148303873', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768872051834882', '1648881516642304002', '第三次精测网加密网复测报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768872148303873', NULL, '20210827李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768872186052610', '1648881516642304002', '高程控制网', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768872148303873', NULL, '20210827李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768872311881729', '1648881516642304002', '平面控制网', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768872148303873', NULL, '20210827李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768872399962113', '1648881516642304002', '重庆至黔江铁路站前6标精测网（含加密）第3次复测成果评估意见', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768872148303873', NULL, '20210827李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768872483848193', '1648881516642304002', '重庆至黔江铁路站前6标精测网（含加密）第3次复测成果评估意见回复', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768872148303873', NULL, '20210827李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768872567734274', '1648881516675858434', '314_全国优秀测绘工程奖推荐书 (0528上传)', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768872630648833', NULL, '20211130马如坤归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768872664203265', '1648881516675858434', '2021四川省测绘地理工程奖申报表20211129（邻水河湖划界）', '2021年', NULL, NULL, 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768872630648833', NULL, '20211130马如坤归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768872748089346', '1648881516675858434', '百强企业评选申请表0521n', '2021年', NULL, NULL, 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768872630648833', NULL, '20211130马如坤归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768872831975425', '1648881516675858434', '全国优秀测绘工程奖（银奖）-大渡河猴子岩水电站外部变形监测工程施', '2021年', NULL, NULL, 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768872630648833', NULL, '20211130马如坤归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768872915861506', '1648881516675858434', '四川省优秀测绘地理信息工程申报表20211129（猴子岩水电站监测）', '2021年', NULL, NULL, 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768872630648833', NULL, '20211130马如坤归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768872999747585', '1648881516675858434', '中小企业评选申请表0521', '2021年', NULL, NULL, 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768872630648833', NULL, '20211130马如坤归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768873083633665', '1648881416700428290', '孟底沟水电站CGCS2000成果', '2021年', NULL, '13', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873146548225', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768873180102657', '1648881417186967554', '孟底沟水电站施工用地范围图转成2000国家大地坐标系', '2020年', NULL, '13', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873146548225', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768873268183041', '1648881419883905026', '雅砻江孟底沟水电站金波石料场码头用地范围图坐标转换', '2019年', NULL, '13', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873146548225', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768873356263426', '1648881416792702977', '2021C01  牙根二级水电站地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, '拆分成3 个报告', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768873461121025', '1648881416792702977', '2021C01  牙根二级水电站地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768873549201410', '1648881416792702977', '雅砻江牙根二级（多吉）水电站多吉坝址地形图（含水下202102）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768873633087489', '1648881416792702977', '雅砻江牙根二级（多吉）水电站料场地形图（202102）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768873721167874', '1648881416792702977', '雅砻江牙根二级（多吉）水电站日衣变形体地形图（202102）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768873809248257', '1648881416792702977', '四川省雅砻江牙根二级（多吉）水电站地形图测绘报告', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768873893134338', '1648881416792702977', '2021C01  四川省雅砻江牙根二级（多吉）水电站地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768873981214721', '1648881416792702977', '2021C01  四川省雅砻江牙根二级（多吉）水电站地形图测绘-检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768874065100802', '1648881416792702977', '雅砻江牙根二级（多吉）水电站木灰坝址地形图（202102）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768874161569793', '1648881416792702977', '雅砻江牙根二级（多吉）水电站木灰沟施工临时场地地形图（202102）1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768874262233090', '1648881416792702977', '2021C01  四川省雅砻江牙根二级（多吉）水电站木灰地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768874350313473', '1648881416792702977', '2021C01  四川省雅砻江牙根二级（多吉）水电站木灰地形图测绘-检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768874480336898', '1648881416792702977', '四川省雅砻江牙根二级（多吉）水电站木灰地形图测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768874597777410', '1648881416792702977', '雅砻江牙根二级水电站多吉占地范围坐标转换成果', '2021年', NULL, '13', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768874690052098', '1648881416792702977', '雅砻江牙根二级水电站占地范围坐标转换成果', '2021年', NULL, '13', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768874786521089', '1648881416792702977', '2021C01  雅砻江牙根二级水电站预可研阶段地形图及坐标转换测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768874878795777', '1648881416792702977', '2021C01  雅砻江牙根二级水电站预可研阶段地形图及坐标转换测绘-检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768874971070466', '1648881416792702977', '四川省雅砻江牙根二级水电站预可研阶段地形图及坐标转换测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768873423372289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768875063345153', '1648881416759148545', '2021C02-四川乐山大渡河龚嘴、铜街子水电站1：1000地形图测绘-测量报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768875126259713', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768875159814145', '1648881416759148545', '2021C02-四川乐山大渡河龚嘴、铜街子水电站1：1000地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768875126259713', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768875256283138', '1648881416759148545', '大渡河龚铜两站电力生产项目龚嘴水电站地形图（含水下202102）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768875126259713', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768875344363521', '1648881416759148545', '大渡河龚铜两站电力生产项目铜街子水电站地形图(含水下202102)1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768875126259713', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768875432443905', '1648881416603959298', '2021C06西藏自治区拉萨河达孜区河段二维流场分析研究地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768875495358465', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768875533107201', '1648881416603959298', '2021C06西藏自治区拉萨河达孜区河段二维流场分析研究地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768875495358465', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768875621187586', '1648881416603959298', '西藏自治区拉萨河达孜区河段二维流场分析研究溢洪坝地形图（202102）1：200', '2021年', '0', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768875495358465', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768875709267969', '1648881416603959298', '西藏自治区拉萨河达孜区河段二维流场分析研究地形图（202102）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768875495358465', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768875805736962', '1648881416499101698', '西藏自治区雅鲁藏布江加查水电站土地复垦新增江热村料场地形图（202102）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650768875872845825', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768875906400257', '1648881416499101698', '西藏自治区雅鲁藏布江加查水电站土地复垦新增取水口地形图（202102）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650768875872845825', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768875998674945', '1648881416499101698', '西藏自治区雅鲁藏布江加查水电站土地复垦新增引水线路地形图（202102）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650768875872845825', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768876095143938', '1648881416499101698', '2021C08-西藏自治区雅鲁藏布江加查水电站土地复垦新增料场地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650768875872845825', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768876200001538', '1648881416499101698', '2021C08-西藏自治区雅鲁藏布江加查水电站土地复垦新增料场地形图测绘-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650768875872845825', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768876283887618', '1648881416499101698', '7-22-2021C08-加查水电站土地复垦新增料场地形图测绘-无人机项目数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1650768876346802177', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768876380356610', '1648881416427798530', '西藏自治区雅鲁藏布江下游XR水电站水库区坝址区地形图及断面测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768876447465474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768876481019906', '1648881416427798530', '2021C09-雅鲁藏布江下游希让水电站水库区坝址区地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768876447465474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768876577488898', '1648881416427798530', '2021C09-雅鲁藏布江下游希让水电站水库区坝址区地形图测绘-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768876447465474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768876665569282', '1648881416427798530', '2021C09 雅鲁藏布江下游XR水电站水库区坝址区地形图测绘-工作量统表计（完成）20210923统计', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768876447465474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768876749455361', '1648881416427798530', '西藏自治区雅鲁藏布江下游XR水电站坝址区三维地形面1：2000', '2021年', '3', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768876447465474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768876845924354', '1648881416427798530', '西藏自治区雅鲁藏布江下游XR水电站水库区坝址区横断面测量成果', '2021年', NULL, NULL, 'word/dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768876447465474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768877110165506', '1648881416427798530', '西藏自治区雅鲁藏布江下游XR水电站水库区坝址区同时水边线测量成果', '2021年', NULL, NULL, 'word/dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768876447465474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768877210828802', '1648881416427798530', '西藏自治区雅鲁藏布江下游希让水电站坝址区地形图1：2000-2022年修测后', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768876447465474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768877298909186', '1648881416427798530', '西藏自治区雅鲁藏布江下游希让水电站水库区地形图（202103）1：10000', '2021年', '5', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768876447465474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768877386989569', '1648881416427798530', '希让2000范围成图精度范围', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768876447465474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768877470875649', '1648881413605031938', '西藏自治区雅鲁藏布江YS梯级电站补充加深研究阿尼桥水电站厂址区地形地类图（202104）1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768877533790209', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768877571538945', '1648881413605031938', '2021C10-阿尼桥水电站加深研究阶段1：2000地形地类图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768877533790209', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768877659619329', '1648881413605031938', '2021C10-阿尼桥水电站加深研究阶段1：2000地形地类图测绘-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768877533790209', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768877751894018', '1648881416411021314', '2021C11 雅江水电站加深研究阶段1：2000地形地类图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768877911277569', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768877944832001', '1648881416411021314', '2021C11 雅江水电站加深研究阶段1：2000地形地类图测绘-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768877911277569', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768878032912385', '1648881416411021314', '西藏自治区雅鲁藏布江YS梯级电站补充加深研究雅江水电站厂址区地形地类图（202104）1：2000', '2021年', '3', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768877911277569', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768878116798465', '1648881416444575746', '2021C12-玉松水库电站加深研究阶段1：2000地形地类图测绘（第一批次）汗密厂址区报告及地形图', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768878179713025', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768878213267458', '1648881416444575746', '2021C12  玉松水库电站加深研究阶段1：2000地形地类图测绘（第一批次）-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768878179713025', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768878305542145', '1648881416444575746', '西藏自治区雅鲁藏布江YS水库电站加深研究汗密厂址区地形地类图（202104）1：2000', '2021年', '3', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768878179713025', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768878389428225', '1648881416360689665', '2021C15-大渡河瀑布沟水电站电力生产项目设计咨询服务武警营房扩建等报告及地形图', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768878452342785', NULL, '20221216杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768878481702914', '1648881416360689665', '2021C15- 大渡河瀑布沟水电站电力生产项目设计咨询服务-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768878452342785', NULL, '20221216杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768878573977602', '1648881416360689665', '2021C15- 大渡河瀑布沟水电站电力生产项目设计咨询服务-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768878452342785', NULL, '20221216杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768878745944065', '1648881416360689665', '大渡河瀑布沟水电站电力生产项目武警营房扩建等区域地形图(202103）1：500', '2021年', '1', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768878452342785', NULL, '20221216杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768878829830145', '1648881416360689665', '7-27-2021C15- 大渡河瀑布沟水电站电力生产项目武警营房扩建等DOM', '2021年', NULL, '1', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768878452342785', NULL, '20221216杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768878917910529', '1648881416343912449', '雅砻江牙根一级水电站生态红线避让范围坐标转换成果', '2021年', NULL, '13', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768878980825090', NULL, '20221216杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768879014379521', '1648881416343912449', '雅砻江牙根一级水电站土地勘界范围图坐标转换成果', '2021年', NULL, '13', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768879077294081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768879110848513', '1648881416343912449', '雅砻江牙根一级水电站产卵场水下地形图2（202103）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768879077294081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768879203123201', '1648881416343912449', '雅砻江牙根一级水电站产卵场水下地形图1（202103）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768879077294081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768879387672577', '1648881416343912449', '2021C17-雅砻江牙根一级产卵场水下地形补测', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768879077294081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768879475752962', '1648881416343912449', '2021C17-雅砻江牙根一级水电站产卵场1：1000水下地形图测绘-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768879077294081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768879563833345', '1648881416343912449', '2021C17-雅砻江牙根一级水电站产卵场1：1000水下地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768879077294081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768879651913730', '1648881416310358017', '2021C18-四川省大渡河长河坝水电站新联土料场复垦地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768879714828289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768879752577025', '1648881416310358017', '2021C18-四川省大渡河长河坝水电站新联土料场复垦地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768879714828289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768879840657409', '1648881416310358017', '2021C18-大渡河长河坝水电站新联土料场复垦地形图（202103）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768879714828289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768879924543490', '1648881416310358017', '大渡河长河坝水电站新联土料场复垦地形图检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768879714828289', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768880016818177', '1648881416293580802', '2021C19-四川省大渡河硬梁包水电站扯索坝、二里坝、冷碛地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768880163618818', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768880201367554', '1648881416293580802', '2021C19-四川省大渡河硬梁包水电站扯索坝、二里坝、冷碛地形图测绘-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768880163618818', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768880289447937', '1648881416293580802', '2021C19-硬梁包补测房子1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768880163618818', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768880377528322', '1648881416293580802', '大渡河硬梁包水电站扯索坝净水厂及高位水池地形图（202103）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768880163618818', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768880461414401', '1648881416293580802', '大渡河硬梁包水电站扯索坝垮塌段地形图（202103）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768880163618818', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768880549494785', '1648881416293580802', '大渡河硬梁包水电站扯索坝取水口及跨沟段地形图（202103）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768880163618818', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768880637575170', '1648881416293580802', '大渡河硬梁包水电站二里坝净水厂地形图（202103）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768880163618818', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768880725655554', '1648881416293580802', '大渡河硬梁包水电站二里坝取水枢纽地形图（202103）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768880163618818', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768880813735938', '1648881416293580802', '大渡河硬梁包水电站冷碛防护工程地形图（202103）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768880163618818', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768880901816322', '1648881416293580802', '大渡河硬梁包水电站泸定二中塌岸防护工程地形图（202103）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768880163618818', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768880985702401', '1648881416293580802', '大渡河硬梁包水电站扯索坝、二里坝、冷碛地形图测绘检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768880163618818', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768881103142914', '1648881416226471938', '2021C20-四川省大渡河猴子岩水电站角坝土料场地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768881161863170', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768881199611906', '1648881416226471938', '2021C20-四川省大渡河猴子岩水电站角坝土料场地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768881161863170', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768881287692289', '1648881416226471938', '2021C20-大渡河猴子岩水电站岩角坝土料场地形图（202104）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768881161863170', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768881421910017', '1648881416226471938', '四川省大渡河猴子岩水电站角坝土料场地形图测绘检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768881161863170', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768881518379010', '1648881416260026369', '2021C21-四川省川藏铁路康定市升航村大坡地安置点地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768881581293570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768881619042305', '1648881416260026369', '2021C21-四川省川藏铁路康定市升航村大坡地安置点地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768881581293570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768881702928386', '1648881416260026369', '2021C21-川藏铁路康定市升航村大坡地安置点地形图（202103）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768881581293570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768881791008769', '1648881416260026369', '四川省川藏铁路康定市升航村大坡地安置点地形图测绘检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768881581293570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768881879089153', '1648881416276803586', '2021C22-四川省大渡河长河坝水电站磨子沟、金汤小学地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768881942003713', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768882000723969', '1648881416276803586', '2021C22-四川省大渡河长河坝水电站磨子沟、金汤小学地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768881942003713', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768882181079041', '1648881416276803586', '大渡河长河坝水电站金汤小学旧址后坡危石地形图（202103）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768881942003713', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768882273353730', '1648881416276803586', '大渡河长河坝水电站磨子沟取水口地形图（202104）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768881942003713', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768882361434114', '1648881416029339649', '2021C29-绰斯甲水电站断面及地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768882424348673', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768882453708801', '1648881416029339649', '2021C29-绰斯甲水电站断面及地形图测绘-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768882424348673', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768882554372098', '1648881416029339649', '大渡河绰斯甲河绰斯甲水电站依生沟渣场地形图（202012）1：1000   ', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768882424348673', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768882743115778', '1648881416029339649', '大渡河绰斯甲河绰斯甲水电站浦西乡上游场地地形图（202104）1:500   ', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768882424348673', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768882835390466', '1648881416029339649', '大渡河绰斯甲河绰斯甲水电站原有地形图坐标转换成果', '2021年', NULL, '13', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768882424348673', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768882923470850', '1648881416029339649', '大渡河绰斯甲河绰斯甲干流及支沟沿河视频', '2021年', NULL, '15', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768882986385410', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768883019939842', '1648881416046116866', '2021C30  2020C52-大渡河双江口水电站左岸泄洪雾化区地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883053494273', NULL, '2021C30  2020C52合并成同一个报告', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768883087048706', NULL, '2021C30 2020C52大渡河双江口水电站左岸泄洪雾化区1：1000地形图-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883053494273', NULL, '2021C30  2020C52合并成同一个报告', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768883145768962', '1648881417723838466', '2021C30  2020C52-大渡河双江口水电站左岸泄洪雾化区地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883053494273', NULL, '2021C30  2020C52合并成同一个报告', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768883233849346', '1648881417723838466', '2021C30 2020C52大渡河双江口水电站左岸泄洪雾化区1：1000地形图-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883053494273', NULL, '2021C30  2020C52合并成同一个报告', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768883321929730', NULL, '双江口水电站工程用地范围图（转换成大地2000坐标）', '2021年', NULL, '13', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883053494273', NULL, '陈尚云转', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768883376455682', NULL, '7-51-2021C30双江口雾化区DOM成果', '2021年', '2', '1', 'tif', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883410010114', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768883447758849', '1648881415979008002', '1、云南省永善县天星坝水库施工测量控制网枢纽区控制点重建观测技术设计书（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883510673409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768883548422146', '1648881415979008002', '2、云南省永善县天星坝水库施工测量控制网枢纽区控制点重建观测观测资料（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883510673409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768883632308226', '1648881415979008002', '3、云南省永善县天星坝水库施工测量控制网枢纽区控制点重建观测计算资料（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883510673409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768883720388610', '1648881415979008002', '4、云南省永善县天星坝水库施工测量控制网枢纽区控制点重建观测成果表（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883510673409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768883804274689', '1648881415979008002', '5、云南省永善县天星坝水库施工测量控制网枢纽区控制点重建观测仪器检定资料（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883510673409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768883888160769', '1648881415979008002', '6、云南省永善县天星坝水库施工测量控制网枢纽区控制点重建观测测量报告（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883510673409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768883976241153', '1648881415979008002', '7、云南省永善县天星坝水库施工测量控制网枢纽区控制点重建项目-管理记录资料(2021)', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883510673409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768884060127234', '1648881415979008002', '8、云南省永善县天星坝水库施工测量控制网枢纽区控制点重建观测控制网布置图（2021年)', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883510673409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768884148207618', '1648881415979008002', '8、云南省永善县天星坝水库施工测量控制网枢纽区控制点重建观测控制网布置图（2021年）原始', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883510673409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768884232093697', '1648881415979008002', '9-2021C33-天星坝水库施工测量控制网枢纽区控制点重建-检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883510673409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768884320174081', '1648881415979008002', '永善县天星坝水库工程项目控制点移交单20210429', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768883510673409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768884408254466', '1648881415895121921', '四川省大渡河老鹰岩一级水电站可行性研究阶段界桩测设测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768884471169025', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768884500529153', '1648881415895121921', '2021C42  老鹰岩一级水电站可行性研究阶段界桩测设项目-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768884471169025', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768884592803841', '1648881415895121921', '老鹰岩一级水电站枢纽工程建设区界桩布置图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768884471169025', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768884680884225', '1648881415895121921', '老鹰岩一级水电站水库影响区建设征地界桩布置图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768884471169025', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768884768964610', '1648881415895121921', '照片', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768884471169025', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768884861239297', '1648881415895121921', '点之记', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768884471169025', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768885062565890', '1648881415911899138', '四川省大渡河老鹰岩二级水电站可行性研究阶段界桩测设测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768885129674753', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768885171617793', '1648881415911899138', '2021C43  老鹰岩二级水电站可行性研究阶段界桩测设项目-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768885129674753', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768885259698177', '1648881415911899138', '老鹰岩二级水电站水库淹没区影响区建设征地界桩布置图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768885129674753', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768885343584258', '1648881415911899138', '老鹰岩二级水电站建设征地工程枢纽区界桩布置图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768885129674753', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768885435858945', '1648881415911899138', '照片', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768885129674753', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768885523939329', '1648881415911899138', '点之记', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768885129674753', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768885612019714', '1648881415748321281', '2021C44-康定市孔玉乡泥洛河坝、菩提河坝、折洛沟新取水口及引水线路地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768885679128577', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768885712683010', '1648881415748321281', '2021C44-康定市孔玉乡泥洛河坝、菩提河坝、折洛沟新取水口及引水线路地形图测绘-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768885679128577', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768885796569089', '1648881415748321281', '四川省康定市孔玉乡泥洛河坝地形图（202106）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768885679128577', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768885955952641', '1648881415748321281', '四川省康定市孔玉乡折洛沟新取水口及引水线路地形图（202106）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768885679128577', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768886207610881', '1648881415748321281', '四川省康定市孔玉乡菩提河坝1：500地形图（202105）', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768885679128577', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768886312468482', '1648881415727349761', '2021C45-龚嘴水电站、铜街子水电站补充测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768886371188737', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768886404743170', '1648881415727349761', '2021C45-龚嘴水电站、铜街子水电站补充测绘-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768886371188737', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768886488629250', '1648881415727349761', '大渡河龚铜两站电力生产项目龚嘴水电站地形图补测（含水下202106）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768886371188737', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768886576709634', '1648881415727349761', '大渡河龚铜两站电力生产项目铜街子水电站地形图补测(含水下202106)1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768886371188737', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768886664790017', '1648881415727349761', '大渡河龚铜两站电力生产项目铜街子水电站新建消防站地形图（202103）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768886371188737', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768886748676098', '1648881415727349761', '大渡河龚铜两站电力生产项目铜街子电站坝下河段水边线测量成果1：500', '2021年', NULL, NULL, 'xls/dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768886371188737', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768886836756481', '1648881415727349761', '大渡河龚铜两站电力生产项目龚嘴水电站坝下河段水边线测量成果1：500', '2021年', NULL, NULL, 'xls/dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768886371188737', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768886920642561', '1648881415706378241', '孟底沟影响区和坝区转成SHP矢量化文件', '2021年', NULL, '2', 'shp', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768886983557122', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768887021305858', '1648881415706378241', '孟底沟2000坐标--1980坐标', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768886983557122', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768887109386242', '1648881415685406721', '2021C47-重庆市涪双江航电枢纽工程初步设计阶段枢纽工程1：500三维地形面制作测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768887172300801', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768887205855233', '1648881415685406721', '2021C47-重庆市涪双江航电枢纽工程初步设计阶段枢纽工程1：500三维地形面制作管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768887172300801', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768887293935618', '1648881415685406721', '7-52-2021C47-重庆市涪江双江航电枢纽工程技施阶段枢纽区三维地形面1：500', '2021年', '1', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768887356850178', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768887394598913', '1648881415567966210', '四川省金沙江叶巴滩水电站降曲河1：1000地形测量、实景三维模型制作等测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768887457513474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768887495262210', '1648881415567966210', '2021C50 - 叶巴滩水电站降曲河1：1000地形测量、实景三维模型制作等-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768887457513474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768887583342593', '1648881415567966210', '金沙江叶巴滩水电站施工阶段降曲河地形图(202107)1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768887457513474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768887671422977', '1648881415567966210', '金沙江叶巴滩水电站坝区地形地类图1︰1000', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768887457513474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768887759503361', '1648881415567966210', 'CD228 SG-621-1(1) 金沙江叶巴滩水电站施工用地范围图R（20-3-9）-CGCS2000', '2021年', NULL, '13', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768887457513474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768887847583746', '1648881415567966210', '西藏侧炸药库征地范围线20210615叶巴滩分公司提供-CGCS2000', '2021年', NULL, '13', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768887457513474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768887935664129', '1648881415567966210', '金沙江叶巴滩水电站降曲公路及料场地形地类图1：1000', '2021年', NULL, '13', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768887457513474', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768888019550209', '1648881415567966210', '7-23-2021C50--金沙江叶巴滩水电站降曲河无人机航拍实景三维模型', '2021年', NULL, '3', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768888082464770', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768888120213506', '1648881415530217473', '2021C52-猴子岩水电站孔玉乡折洛沟供水工程地形图测绘500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768888183128065', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768888220876802', '1648881415530217473', '2021C52-猴子岩水电站孔玉乡折洛沟供水工程地形图测绘1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768888183128065', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768888409620481', '1648881415530217473', '2021C52-四川省大渡河猴子岩水电站孔玉乡折洛沟供水工程地形图测绘测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768888183128065', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768888510283778', '1648881415530217473', '2021C52-四川省大渡河猴子岩水电站孔玉乡折洛沟供水工程地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768888183128065', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768888606752770', '1648881415458914305', '2021C53-大邑县抽水蓄能电站地形测绘项目 测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768888673861633', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768888707416065', '1648881415458914305', '2021C53-大邑县抽水蓄能电站地形测绘项目-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768888673861633', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768888812273666', '1648881415458914305', '四川省大邑县抽水蓄能电站（负荷侧）预可研阶段地形图1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768888875188226', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768888912936962', '1648881415458914305', '四川省大邑县抽水蓄能电站（负荷侧）预可研阶段地形图1：5000', '2021年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768888875188226', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768889001017345', '1648881415458914305', '四川省大邑县抽水蓄能电站（负荷侧）预可研阶段三维地形面1：2000', '2021年', '3', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768888875188226', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768889084903425', '1648881415458914305', '四川省大邑县抽水蓄能电站（负荷侧）预可研阶段三维地形面1：5000', '2021年', '4', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768888875188226', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768889206538241', '1648881415458914305', '四川省大邑县抽水蓄能电站（负荷侧）预可研阶段三维模型1：1000', '2021年', '2', '3', 'osgb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768888875188226', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768889294618626', '1648881415446331394', '官地水电站打罗沟泥石流治理项目 测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768889357533186', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768889399476225', '1648881415446331394', '官地水电站打罗沟泥石流治理项目 管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768889357533186', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768889487556610', '1648881415446331394', '雅砻江官地电力生产项目打罗沟泥石流治理地形图(202107)1：2000', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768889357533186', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768889575636994', '1648881415446331394', '雅砻江官地电力生产项目打罗桥以下-雅砻江地形图(202107)1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768889357533186', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768889667911681', '1648881415446331394', '雅砻江官地电力生产项目金打公路K6+750泥石流治理段地形图(202107)1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768889357533186', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768889839878146', '1648881415446331394', '雅砻江官地电力生产项目竹子坝西侧沟取水口地形图(202107)1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768889357533186', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768889936347137', '1648881415265976322', '2021C61-攀枝花仁和区抽水蓄能电站预可阶段测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768889999261698', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768890037010433', '1648881415265976322', '2021C61-攀枝花仁和区抽水蓄能电站预可阶段测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768889999261698', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768890125090817', '1648881415265976322', '四川省攀枝花抽水蓄能电站预可研阶段地形图1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768889999261698', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768890213171202', '1648881415265976322', '四川省攀枝花抽水蓄能电站预可研阶段地形图1：5000', '2021年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768889999261698', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768890301251585', '1648881415265976322', '四川省攀枝花抽水蓄能电站预可研阶段三维地形面1：2000', '2021年', '3', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768890364166145', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768890397720577', '1648881415265976322', '四川省攀枝花抽水蓄能电站预可研阶段三维地形面1：5000', '2021年', '4', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768890364166145', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768890485800962', '1648881415001735169', '炎山镇大沱村甘支园组图斑面积到户统计表2021.8', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768890548715521', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768890582269953', '1648881415001735169', '昭阳区炎山镇大沱村甘支园组图斑坐标2021.8', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768890548715521', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768890670350338', '1648881415001735169', '昭阳区炎山镇大沱村甘支园组图斑2021.8', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768890548715521', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768890758430722', '1648881414880100353', '2021C71-四川省洪涝灾害应急处置项目DEM、DOM、三维模型制作及应急演练测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768890829733890', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768890863288322', '1648881414880100353', '2021C71-四川省洪涝灾害应急处置项目DEM、DOM、三维模型制作及应急演练测绘-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768890829733890', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768890955563010', '1648881414880100353', '第一张图', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768891022671874', NULL, '( 含冕宁)', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768891056226306', '1648881414880100353', '飞行视频', '2021年', NULL, NULL, 'MP4', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768891022671874', NULL, '( 含冕宁)', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768891148500994', '1648881414880100353', '航飞影像数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768891022671874', NULL, '( 含冕宁)', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768891232387074', '1648881414880100353', '激光点云数据', '2021年', NULL, NULL, 'las', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768891022671874', NULL, '( 含冕宁)', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768891320467457', '1648881414880100353', '数字高程模型_DEM（1：1000）', '2021年', NULL, '0', 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768891022671874', NULL, '( 含冕宁)', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768891416936450', '1648881414880100353', '实景三维模型_OSGB、_3DTiles（1：500）（1：500）', '2021年', NULL, '3', 'osgb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768891022671874', NULL, '( 含冕宁)', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768891509211138', '1648881414880100353', '数字正射影像_DOM（1：500）', '2021年', NULL, '1', 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768891022671874', NULL, '( 含冕宁)', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768891597291521', '1648881414657802242', '2021C79-大渡河龚铜两站电力生产项目龚嘴水电站拦污栅库段、渣场地形图及横断面测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768891660206081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768891702149121', '1648881414657802242', '2021C79-大渡河龚铜两站电力生产项目龚嘴水电站拦污栅库段、渣场地形图及横断面测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768891660206081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768891790229506', '1648881414657802242', '点子照片', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768891660206081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768891874115586', '1648881414657802242', '航线图', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768891660206081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768891958001665', '1648881414657802242', '大渡河龚嘴水电站水库拦污栅库段1：500地形图（正式图）', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768891660206081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768892041887746', '1648881414657802242', '大渡河龚嘴水电站水库渣场1：1000地形图（正式图）', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768891660206081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768892129968130', '1648881414511001602', '西藏自治区金沙江波罗水电站白格滑坡区地形图(202110)1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768892192882689', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768892226437121', '1648881414511001602', '2021C84-西藏自治区金沙江波罗水电站白格滑坡体1000地形测绘项目-管理记录资料12.15', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768892192882689', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768892318711809', '1648881414511001602', '西藏自治区金沙江波罗水电站白格滑坡区地形图、DOM、三维模型制作测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768892192882689', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768892415180802', '1648881414511001602', '西藏自治区金沙江波罗水电站白格滑坡区1：1000三维模型', '2021年', NULL, '3', 'osgb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768892574564353', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768892608118785', '1648881414511001602', '西藏自治区金沙江波罗水电站白格滑坡区1：1000正射影像大图白格滑坡区DOM(分辨率0.2）', '2021年', NULL, '1', 'tif', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768892574564353', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768892700393473', '1648881414511001602', '西藏自治区金沙江波罗水电站白格滑坡区1：1000正射影像大图白格滑坡区DOM1：1000', '2021年', NULL, '1', 'tif', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768892574564353', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768892792668161', '1648881414213206018', '大渡河大岗山水电站雨洒河—大坝左坝肩连接道路地形图(202111)1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768892935274498', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768892973023233', '1648881414213206018', '2021C99-大岗山水电站雨洒河—大坝左坝肩连接道路1：500地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768892935274498', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768893056909313', '1648881414213206018', '2021C99-大岗山水电站雨洒河—大坝左坝肩连接道路1：500地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768892935274498', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768893140795393', '1648881416742371330', '2021W05巴拉水电站工程区内原始地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768893203709954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768893237264386', '1648881416742371330', '2021W05巴拉水电站工程区内原始地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768893203709954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768893325344770', '1648881416742371330', '大渡河脚木足河巴拉水电站工程区内巴郎村渣场原始地形图（202103）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768893203709954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768893421813762', '1648881416742371330', '大渡河脚木足河巴拉水电站工程区内风草沟渣场及火烧山料场原始地形图（202103）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768893203709954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768893505699842', '1648881416742371330', '大渡河脚木足河巴拉水电站工程区内果儿巫沟渣场原始地形图（202103）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768893203709954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768893593780226', '1648881416742371330', '大渡河脚木足河巴拉水电站工程区内猴子沟渣场原始地形图（202103）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768893203709954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768893681860610', '1648881416742371330', '大渡河脚木足河巴拉水电站工程区内首部枢纽区原始地形图（202103）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768893203709954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768893774135297', '1648881416742371330', '大渡河脚木足河巴拉水电站工程区内亚拉沟渣场原始地形图（202103）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768893203709954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768893858021377', '1648881416520073217', '四川省大渡河支流湾东河湾东水电站、河口水电站复核测量项目-测绘报告', '2021年', NULL, NULL, 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768893920935937', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768893954490370', '1648881416520073217', '2021W11- 湾东水电站、河口水电站复核测量-管理记录资料', '2021年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768893920935937', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768894042570753', '1648881416520073217', '刊误更正说明', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768893920935937', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768894126456833', '1648881416520073217', '异议的回复', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768893920935937', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768894210342913', '1648881416520073217', '测绘资料清单', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768893920935937', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768894298423298', '1648881416243249154', '1 2021W13-石棉县新民乡足富大理石矿勘察测绘服务地形图', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768894361337858', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768894394892290', '1648881416243249154', '2 2021W13-石棉县新民乡足富大理石矿勘察测绘服务地形图（mpgis）', '2021年', NULL, '2', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768894361337858', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768894491361282', '1648881416243249154', '3 2021W13-石棉县新民乡足富大理石矿勘察测绘服务勘探线', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768894361337858', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768894579441666', '1648881416243249154', '2021W13-石棉县新民乡足富大理石矿勘察测绘服务-测绘报告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768894361337858', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768894705270785', '1648881416243249154', '2021W13-石棉县新民乡足富大理石矿勘察测绘服务-管理记录资料 ', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768894361337858', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768894801739777', '1648881416243249154', '2021W13-石棉县新民乡足富大理石矿勘察测绘-呈交清单', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768894361337858', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768894889820162', '1648881416243249154', '7-66-2021W13-石棉县新民乡足富大理石矿勘察测绘服务无人机归档资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768894948540417', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768894986289153', '1648881415781875714', '2021W19-卡基娃水电站升压站1：500地形图测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895053398017', NULL, '李禺交报告及地形图', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768895086952449', '1648881415781875714', '卡基娃水电站升压站地形图1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895053398017', NULL, '李禺交报告及地形图', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768895179227137', '1648881415513440258', '2021W23-G4216线屏山新市至金阳段永善支线补测地形图1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895242141697', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768895279890434', '1648881415513440258', '2021W23-G4216线屏山新市至金阳段永善支线地形图补测测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895242141697', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768895367970817', '1648881415513440258', '2021W23-G4216线屏山新市至金阳段永善支线地形图补测测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895242141697', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768895456051202', '1648881415513440258', 'G4216线屏山新市至金阳段永善支线地形图1：10000', '2021年', '5', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895242141697', NULL, '接边有改动', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768895544131586', '1648881415513440258', 'G4216线屏山新市至金阳段永善支线地形图补测1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895242141697', NULL, '接边有改动', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768895636406273', '1648881415492468738', '1、确如多水电站工程施工测量控制网测绘技术设计书（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895703515138', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768895737069570', '1648881415492468738', '2、确如多水电站工程施工测量控制网测绘观测资料（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895703515138', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768895829344257', '1648881415492468738', '3、确如多水电站工程施工测量控制网测绘计算资料（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895703515138', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768895921618945', '1648881415492468738', '4、确如多水电站工程施工测量控制网测绘成果表（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895703515138', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768896009699329', '1648881415492468738', '5、确如多水电站工程施工测量控制网测绘器检定资料（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895703515138', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768896093585410', '1648881415492468738', '6、确如多水电站工程施工测量控制网测绘测量报告（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895703515138', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768896223608834', '1648881415492468738', '7、确如多水电站工程施工测量控制网测绘管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895703515138', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768896345243650', '1648881415492468738', '7、确如多水电站工程施工测量控制网测绘检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895703515138', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768896445906946', '1648881415492468738', '8、确如多水电站工程施工测量控制网测绘总布置图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768895703515138', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768896575930370', '1648881417564454914', '2020C53-天星坝水库枢纽工程1#和2#支洞口施工控制网测量-测绘报告', '2020年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768896668205058', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768896701759489', '1648881417564454914', '2020C53-天星坝水库枢纽工程1#和2#支洞口施工控制网测量-管理记录资料', '2020年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768896668205058', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768896785645569', '1648881414527778817', '老木孔航电枢纽工程施工测量控制网设计、建网及首次观测项目施工控制点移交单2021.12.21', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768896848560129', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768896882114562', '1648881414137708545', '2021C103-洼垴水电站修复项目地形图测量-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768896945029121', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768896978583554', '1648881414137708545', '2021C103-洼垴水电站修复项目地形图测量-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768896945029121', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768897150550017', '1648881414137708545', '测绘项目技术交底会议纪要.-洼垴水电站修复项目地形图测量', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768896945029121', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768897238630402', '1648881414137708545', '四川省西昌市洼垴水电站修复项目地形图(202112)1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768896945029121', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768897322516481', '1648881415647657985', '2021W20广东韶关南水湖1：1000入库项目-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768897385431042', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768897423179778', '1648881415647657985', '2021W20广东韶关南水湖1000地形图入库项目', '2021年', '2', '2', 'mdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768897385431042', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768897595146242', '1648881415475691522', '6-成彭快速路（彭州市段）工程技术设计书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768897666449409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768897700003842', '1648881415475691522', '7-成彭快速路（彭州市段）工程-仪器检定资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768897666449409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768897796472834', '1648881415475691522', '8-空三精度报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768897666449409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768897892941825', '1648881415475691522', '9-成彭快速路（彭州市段）工程技术总结', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768897666449409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768897989410818', '1648881415475691522', '10-数学精度检查表', '2021年', NULL, '8', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768897666449409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768898081685505', '1648881415475691522', '11-成彭快速路（彭州市段）工程-检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768897666449409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768898165571586', '1648881415475691522', '12-成彭快速路（彭州市段）工程-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768897666449409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768898253651969', '1648881415475691522', '成彭快速路地形图正式图-CGCS2000-H85高', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768897666449409', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768898337538049', '1648881415475691522', '1-原始航飞资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768898400452610', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768898434007041', '1648881415475691522', '2-像控点', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768898400452610', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768898517893122', '1648881415475691522', '3-外业调绘', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768898400452610', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768898601779201', '1648881415475691522', '4-转换模型', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768898400452610', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768898689859586', '1648881415475691522', 'dom成果', '2021年', NULL, '1', 'tif', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768898400452610', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768898773745666', '1648881415475691522', '三维模型成果', '2021年', NULL, '3', 'osgb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768898400452610', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768898870214658', '1648881414603276289', '1 观测资料封面及水平角、边长观测', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768899000238081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768899042181122', '1648881414603276289', '2 水准观测', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768899000238081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768899188981762', '1648881414603276289', '3 计算资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768899000238081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768899277062145', '1648881414603276289', '4 监测报告、检查报告、专家评审意见表', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768899000238081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768899360948225', '1648881414603276289', '5 成果表', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768899000238081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768899449028610', '1648881414603276289', '竣工报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768899000238081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768899541303297', '1648881414603276289', '三措一案（2021）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768899000238081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768899629383682', '1648881414603276289', '2021W32-国网西藏拉萨发电公司2021年羊湖电站第八期压力钢管永久变形监测网校核-管理记录资料', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768899000238081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768899713269762', '1648881414603276289', '移交清单', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768899000238081', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768899801350145', '1648881414049628162', '2021W38-四川遂宁能源职业学院建设项目1：500地形图', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768899864264705', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768899902013442', '1648881414116737025', '确如多水电站采石场地形图(202112)1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768900057202689', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768900111728641', '1648881414116737025', '确如多水电站渣场地形图(202112)1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768900057202689', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768900317249538', '1648881414116737025', '确如多水电站采石场1：1000地形图及渣场1：1000地形图测量成果签收单', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768900057202689', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768900547936257', '1648881414116737025', '确如多水电站料场及渣场地形图测测绘技术总结', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768900057202689', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768900644405249', '1648881414116737025', '确如多水电站料场及渣场地形图测绘技术设计书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768900057202689', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768900740874242', '1648881414116737025', '确如多水电站料场及渣场地形图测绘仪器检定资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768900057202689', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768900837343233', '1648881414116737025', '确如多水电站料场及渣场地形图测测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768900057202689', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768900917035009', '1648881414116737025', '确如多水电站料场及渣场地形图测测绘检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768900057202689', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768901000921090', '1648881516713607170', '大竹县城区地下给排水图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768901063835650', NULL, '20220110张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768901093195777', '1648881516742967297', '成都兴城集团配置地范围内”两拆一增“（六期）项目六处点位地形图测绘项目结算书2021.5.31', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768901156110338', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768901189664769', '1648881516742967297', '纸质扫描件合并', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768901156110338', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768901277745154', '1648881516742967297', '2022_01_05_11_34_04兴城公司移交书及归档表', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768901156110338', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768901453905922', '1648881516742967297', '东区1号2号3号4号、南区1号、2号', '2021年', NULL, '2', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768901156110338', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768901537792002', '1648881516742967297', '两拆一增项目项目结算书', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768901156110338', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768901621678082', '1648881516742967297', '两拆一增项目任务委托书', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768901156110338', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768901709758466', '1648881516742967297', '两拆一增项目结算审核申请表', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768901156110338', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768901797838849', '1648881516742967297', '两拆一增项目合同结算审查表', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768901156110338', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768901894307841', '1648881516742967297', '两拆一增项目合同', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768901156110338', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768901990776833', '1648881516742967297', '两拆一增项目工作量统计表', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768901156110338', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768902074662913', '1648881516742967297', '两拆一增项目结算归档资料集2021.7.15', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768901156110338', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768902166937601', '1648881516776521730', '直孔电站库区泥沙淤积测量设计文件（送审稿）-测绘资料呈交清单', '2021年', NULL, NULL, 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768902229852162', NULL, '20220110张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768902263406594', '1648881516776521730', '直孔电站库区泥沙淤积测量设计文件20220110（送审稿）', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768902229852162', NULL, '20220110张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768902347292673', '1648881416394244098', '金川县双柏树安置点1：1000地形图测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768902410207233', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768902460538882', '1648881416394244098', '金川县双柏树安置点1：1000地形图测绘管理记录', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768902410207233', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768902657671169', '1648881416394244098', '大渡河双江口水电站双柏树地形图补测1：1000', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768902410207233', NULL, '54坐标系和2000坐标系', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768902758334465', '1648881516810076162', '西藏老虎嘴监测控制网重建恢复及工作基点校核专题设计文件（送审稿）-测绘资料呈交清单', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768902825443329', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768902875774978', '1648881516810076162', '西藏老虎嘴监测控制网重建恢复及工作基点校核专题设计文件20211230m ', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768902825443329', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768902993215490', '1648881414066405377', '1 测绘资料呈交清单', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768903156793346', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768903194542081', '1648881414066405377', '2  2021年三等网复测外业观测资料', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768903156793346', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768903291011074', '1648881414066405377', '3  2021年复测计算资料', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768903156793346', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768903450394626', '1648881414066405377', '4  2021年复测成果表', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768903156793346', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768903538475010', '1648881414066405377', '5  2021年复测仪器检定书', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768903156793346', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768903626555394', '1648881414066405377', '6  2021年复测测量报告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768903156793346', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768903706247169', '1648881414066405377', '7  2021年复测质量检查报告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768903156793346', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768903790133250', '1648881414066405377', '8 双江口水电站枢纽工程三等施工测量控制网2021年复测技术方案', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768903156793346', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768903865630722', '1648881414066405377', 'CMCSKFWC SJK SJK QT 2020 008 001 2022 关于报送成果的函', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768903156793346', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768903949516802', '1648881414066405377', '双江口水电站2021年三等施控网复测管理记录料', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768903156793346', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1650768904033402882', '1648881414066405377', '双江口水电站施工测量控制网复测布置图(2021年三等复测) ', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768903156793346', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393519772499970', '1648881516843630594', '441802广东省清远市清城区粮食（水稻）生产功能区划定管护数据', '2021年', NULL, NULL, 'mdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393519847997441', NULL, '20220125张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393519944466433', '1648881516843630594', '441802广东省清远市清城区粮食（水稻）生产功能区划定汇总表格', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393519847997441', NULL, '20220125张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393520040935426', '1648881516843630594', '441802广东省清远市清城区粮食（水稻）生产功能区划定矢量数据', '2021年', NULL, NULL, 'shp', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393519847997441', NULL, '20220125张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393520141598722', '1648881516843630594', '441802广东省清远市清城区粮食（水稻）生产功能区划定文档资料', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393519847997441', NULL, '20220125张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393520242262018', '1648881516843630594', '441823广东省清远市阳山县粮食（水稻）生产功能区划定管护数据', '2021年', NULL, NULL, 'mdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393519847997441', NULL, '20220125张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393520330342402', '1648881516843630594', '441823广东省清远市阳山县粮食（水稻）生产功能区划定汇总表格', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393519847997441', NULL, '20220125张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393520431005697', '1648881516843630594', '441823广东省清远市阳山县粮食（水稻）生产功能区划定矢量数据', '2021年', NULL, NULL, 'shp', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393519847997441', NULL, '20220125张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393520695246849', '1648881516843630594', '441823广东省清远市阳山县粮食（水稻）生产功能区划定文档资料', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393519847997441', NULL, '20220125张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393520800104450', '1648881516877185025', '五大经济区旅游产品发展方向及旅游资源开发条件评价研究(成果稿)', '2021年', NULL, NULL, 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393520871407618', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393520925933569', '1648881416100642818', '2021C27-岷江老木孔航电枢纽工程施工阶段乌尤寺水文站水文高程读数高程转换资料', '2021年', NULL, '13', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393520993042433', NULL, '2021C27报告合并到2021C56中', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393521026596866', '1648881415412776962', '岷江老木孔航电枢纽工程施工阶段防洪堤1：200横断面测量', '2021年', '0', '14', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393520993042433', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393521148231681', '1648881415412776962', '1-岷江老木孔航电枢纽工程枢纽区地形图(含水下202109）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393520993042433', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393521244700673', '1648881415412776962', '2-岷江老木孔航电枢纽工程库区防洪堤带状地形图(含水下)1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393520993042433', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393521332781057', '1648881415412776962', '2021C56-四川省岷江老木孔航电枢纽工程施工阶段枢纽区及库区地形图测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393520993042433', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393521425055746', '1648881415412776962', '2021C56-四川省岷江老木孔航电枢纽工程施工阶段枢纽区及库区地形图测量管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393520993042433', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393521517330433', '1648881415412776962', '板桥电站以上全图平移后(加断面)-断面位置复核CGCS2000、老木孔2000全拼图CGCS2000、老木孔库区断面图CGCS2000、老木孔全图1000CGCS2000、市中区总图CGCS2000（105°中央子午线）、五通桥总图1(防洪堤与淹没区重叠)CGCS2000（105°中央子午线）、岷江航电老木孔枢纽工程淹没示意图CGCS2000SHP、杜家场村CGCS2000、老木孔航电枢纽工程初步设计施工用地范围图_2000坐标系、平安村和白念村CGCS2000', '2021年', NULL, '13', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393520993042433', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393521609605122', '1648881415962230785', '2021C32孟底沟公路放样成果（照片、成果）', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393521672519681', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393521710268417', '1648881415962230785', '测量原始资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393521672519681', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393521810931714', '1648881415962230785', '2021C32 孟底沟水电站施工图公路中桩放线测量-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393521672519681', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393521903206402', '1648881415962230785', '2021C32 孟底沟水电站施工图公路中桩放线测量-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393521672519681', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393521995481089', '1648881415991590913', '2021C34老鹰岩一二级水电站航拍及DOM制作_测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393522062589954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393522100338689', '1648881415991590913', '2021C34老鹰岩一二级水电站航拍及DOM制作_管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393522062589954', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393522192613378', '1648881415991590913', '7-68-2021C34-老鹰岩一二级水电站DOM ', '2021年', NULL, '1', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393522268110849', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393522305859586', '1648881415991590913', '7-68-2021C34-老鹰岩一二级水电站航拍视频', '2021年', NULL, NULL, 'MP4', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393522268110849', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393522393939970', '1648881415798652929', '四川省雅砻江牙根二级水电站预可研阶段淹没区及集镇新址地形地类图测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393522469437442', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393522528157698', '1648881415798652929', '2021C41-四川省雅砻江牙根二级水电站预可研阶段淹没区及集镇新址地形地类图管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393522469437442', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393522624626690', '1648881415798652929', '雅砻江牙根二级水电站预可研阶段淹没区地形地类图（202106)1︰5000', '2021年', '4', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393522469437442', NULL, '雅砻江坐标系及2000国家大地坐标系', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393522716901378', '1648881415798652929', '雅砻江牙根二级水电站(预可阶段)集镇新址地形地类图（一）（202106)1︰2000', '2021年', '3', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393522469437442', NULL, '雅砻江坐标系及2000国家大地坐标系', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393522846924801', '1648881415798652929', '雅砻江牙根二级水电站(预可阶段)集镇新址地形地类图（二）（202106)1︰2000', '2021年', NULL, '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393522469437442', NULL, '雅砻江坐标系及2000国家大地坐标系', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393522981142530', '1648881415798652929', '雅砻江牙根二级水电站(预可阶段)集镇新址地形地类图（三）（202106)1︰2000', '2021年', NULL, '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393522469437442', NULL, '雅砻江坐标系及2000国家大地坐标系', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393523115360258', '1648881415668629506', '2021C48  老鹰岩水电站礼约河1：2000地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393523207634945', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393523241189377', '1648881415668629506', '2021C48  老鹰岩水电站礼约河1：2000地形图测绘-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393523207634945', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393523341852674', '1648881415668629506', '大渡河老鹰岩一级水电站礼约河地形图（202106）1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393523207634945', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393523442515969', '1648881415668629506', '7-75-2021C48 老鹰岩水电站礼约河1：2000地形图测绘航测资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393523513819137', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393523551567873', '1648881415429554178', '雅砻江牙根一级水电站昆地地形地类图(含水下202107)1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393523622871041', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393523664814082', '1648881415429554178', '2021C55牙根一级昆地500地形地类图测量-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393523622871041', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393523765477377', '1648881415429554178', '2021C55牙根一级昆地500地形地类图测量-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393523622871041', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393523866140674', '1648881415286947841', '四川省雅砻江牙根二级水电站预可研阶段淹没区（下游至立丘河下游吊桥）1：5000地形地类图测绘报告', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393523933249538', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393523966803969', '1648881415286947841', '2021C58牙根5000地形地类图测绘项目-管理记录资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393523933249538', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393524059078657', '1648881415286947841', '雅砻江牙根二级水电站预可研阶段淹没区（下游至立丘河下游吊桥）地形地类图（202106)1：5000', '2021年', '4', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393523933249538', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393524151353346', '1648881415286947841', '雅砻江牙根二级水电站预可研阶段淹没区及坝区范围线', '2021年', NULL, NULL, 'shp/dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393523933249538', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393524243628033', '1648881415240810497', '2021C62 孟底沟水电站伍须海—上团乡—孟底沟通乡通村公路改建工程施工图测量放线-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393524310736898', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393524344291330', '1648881415240810497', '2021C62 孟底沟水电站伍须海至上团乡至孟底沟通乡通村公路改建工程施工图测量放线—测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393524310736898', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393524457537538', '1648881415240810497', '孟底沟水电站伍须海-上团乡-孟底沟通乡公路大修工程测量控制点交桩记录表2021.10.19', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393524310736898', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393524554006530', '1648881415240810497', '2021C62 -孟底沟水电站伍须海至上团乡至孟底沟通乡通村公路改建工程施工图测量放线原始观测资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393524310736898', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393524658864130', '1648881415240810497', '附件：特征点成果表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393524310736898', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393524751138817', '1648881415240810497', '孟底沟项目公路改建1：500地形图', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393524310736898', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393524839219201', '1648881415240810497', '伍须海至孟底沟至雅砻江 国家2000坐标系总图-转坐标', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393524310736898', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393524931493889', '1648881415186284546', '康定市牛棚子村移民安置点地形图（202104）1：1000   500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393524994408450', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393525032157185', '1648881415186284546', '2021C63四川省大渡河长河坝牛棚子沟1：500地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393524994408450', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393525120237569', '1648881415186284546', '2021C63四川省大渡河长河坝牛棚子沟1：500地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393524994408450', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393525241872386', '1648881414796214274', '2021C73四川省大渡河长河坝新联土料场地形图补测-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393525304786946', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393525342535682', '1648881414796214274', '2021C73大渡河长河坝水电站新联土料场复垦1：1000补充测绘地形图', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393525304786946', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393525430616065', '1648881414775242753', '2021C74  昌都市示范区地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393525539667969', '1648881414775242753', '2021C74  昌都市示范区地形图测绘-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393525631942657', '1648881414775242753', '西藏昌都市边坝县光伏布置地形图(202109)1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393525728411650', '1648881414775242753', '西藏昌都市边坝县取水构筑物地形图（202109）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393525829074945', '1648881414775242753', '西藏昌都市边坝县示范区DOM1：1000', '2021年', '2', '1', 'tif', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393525925543938', '1648881414775242753', '西藏昌都市边坝县示范区地形图（202110）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393526022012930', '1648881414775242753', '西藏昌都市丁青县光伏布置测绘地形图（202109）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393526110093314', '1648881414775242753', '西藏昌都市丁青县取水构筑物测绘地形图（202109）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393526202368002', '1648881414775242753', '西藏昌都市丁青县示范区DOM1：1000', '2021年', '2', '1', 'tif', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393526290448386', '1648881414775242753', '西藏昌都市丁青县示范区地形图(202110)1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393526382723074', '1648881414775242753', '西藏昌都市洛隆县光伏布置地形图（202109）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393526474997762', '1648881414775242753', '西藏昌都市洛隆县取水构筑物地形图（202109）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393526571466753', '1648881414775242753', '西藏昌都市洛隆县示范区DOM1：1000', '2021年', '2', '1', 'tif', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393526659547137', '1648881414775242753', '西藏昌都市洛隆县示范区地形图（202110）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393526751821825', '1648881414775242753', '西藏昌都市边坝县示范区地形图(补测)（202207）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393526839902210', '1648881414775242753', '西藏昌都市丁青县示范区地形图(补测)（202207）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393525501919234', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393526936371201', '1648881414775242753', '7-72-2021C74-昌都市示范区测量项目地形图-无人机归档资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393526999285762', NULL, '20220317杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393527070588930', '1648881414527778817', '1、四川省岷江老木孔航电枢纽工程施工控制网设计,建网及首次观测-设计书（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393527246749697', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393527284498434', '1648881414527778817', '2、四川省岷江老木孔航电枢纽工程施工控制网设计,建网及首次观测-观测资料（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393527246749697', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393527418716162', '1648881414527778817', '3、四川省岷江老木孔航电枢纽工程施工控制网设计,建网及首次观测-计算资料（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393527246749697', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393527552933889', '1648881414527778817', '4、四川省岷江老木孔航电枢纽工程施工控制网设计,建网及首次观测-成果表（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393527246749697', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393527682957313', '1648881414527778817', '5、四川省岷江老木孔航电枢纽工程施工控制网设计,建网及首次观测-仪器检定资料（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393527246749697', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393527771037698', '1648881414527778817', '6、四川省岷江老木孔航电枢纽工程施工控制网设计,建网及首次观测-测量报告（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393527246749697', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393527859118082', '1648881414527778817', '7、四川省岷江老木孔航电枢纽工程施工控制网设计,建网及首次观测-检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393527246749697', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393527947198465', '1648881414527778817', '8、四川省岷江老木孔航电枢纽工程施工测量控制网布置图（2021年）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393527246749697', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393528039473154', '1648881414527778817', '四川省岷江老木孔航电枢纽工程施工控制网设计,建网及首次观测测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393527246749697', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393528127553538', '1648881414527778817', '老木孔库尾勘界等高线测量-杨晶', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393527246749697', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393528224022530', '1648881414527778817', '老木孔航电枢纽工程施工测量控制网设计、建网及首次观测项目施工控制点移交单2021.12.21', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393527246749697', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393528400183297', '1648881414527778817', '四川省岷江老木孔航电枢纽工程施工控制网设计,建网及首次观测-管理记录资料 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393527246749697', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393528496652290', '1648881414473252866', '2021C86-四川省大渡河长河坝野坝村地形图测绘测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393528618287105', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393528656035841', '1648881414473252866', '2021C86-四川省大渡河长河坝野坝村地形图测绘管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393528618287105', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393528744116225', '1648881414473252866', '2021C86  长河坝野坝村1：500地形图', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393528618287105', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393528832196609', '1648881414456475649', '2021C87-绰斯甲厂址坝址区三维地形面制作-测绘报告0321', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393528899305473', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393528937054209', '1648881414456475649', '2021C87-绰斯甲厂址坝址区三维地形面制作-管理记录资料0317', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393528899305473', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393529033523202', '1648881414456475649', '绰斯甲坝区三维地形面1：1000-正式', '2021年', '2', '4', 'stl', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393528899305473', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393529121603585', '1648881414456475649', '绰斯甲厂区三维地形面-栅格法-正式', '2021年', '2', '4', 'stl', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393528899305473', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393529213878274', '1648881414456475649', '大渡河绰斯甲水电站坝址区地形图（含水下202201）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393528899305473', NULL, '绰斯甲点云重新飞-吴振202205更新', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393529301958658', '1648881414456475649', '大渡河绰斯甲水电站厂址区地形图（含水下202201）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393528899305473', NULL, '绰斯甲点云重新飞-吴振202205更新', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393529394233346', '1648881414456475649', '厂区枢纽区地面点点云', '2021年', NULL, NULL, 'las', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393528899305473', NULL, '绰斯甲点云重新飞-吴振202205更新工程坐标系及2000国家大地坐标系', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393529486508033', '1648881414456475649', '绰斯甲断面点0224', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393528899305473', NULL, '绰斯甲点云重新飞-吴振202205更新', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393529608142850', '1648881414456475649', '绰斯甲水下断面线', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393528899305473', NULL, '绰斯甲点云重新飞-吴振202205更新', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393529696223233', '1648881414313869314', '西藏自治区紫霞水电站预可、可研阶段补充测量测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393529763332097', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393529813663745', '1648881414313869314', '2021C94 紫霞水电站补充测绘工作-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393529763332097', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393529901744130', '1648881414313869314', '西藏自治区霞曲紫霞水电站补充测绘地形图(紫霞水电站工程坐标系转换成2000国家大地坐标系）', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393529763332097', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393530010796034', '1648881414313869314', '西藏自治区紫霞水电站预可、可研阶段补充测量G349恩珠藏布桥地形图(202111)1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393529763332097', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393530098876417', '1648881414313869314', '西藏自治区紫霞水电站预可、可研阶段补充测量G349霞曲桥地形图（202111）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393529763332097', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393530191151105', '1648881414313869314', '西藏自治区紫霞水电站预可、可研阶段补充测量G349玉坝桥地形图（202111）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393529763332097', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393530279231489', '1648881414313869314', '西藏自治区紫霞水电站预可、可研阶段补充测量崩布隆巴沟炸药库地形图（202111）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393529763332097', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393530371506178', '1648881414313869314', '西藏自治区紫霞水电站预可、可研阶段补充测量卡许料场地形地类图（202111）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393529763332097', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393530472169474', '1648881414313869314', '西藏自治区紫霞水电站预可、可研阶段补充测量莫汝弄巴泥石流沟地形图（202111）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393529763332097', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393530660913153', '1648881414313869314', '西藏自治区紫霞水电站预可、可研阶段补充测量取水口二地形图（202111）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393529763332097', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393530748993538', '1648881414313869314', '西藏自治区紫霞水电站预可、可研阶段补充测量取水口一地形图（202111）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393529763332097', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393530841268226', '1648881414313869314', '西藏自治区紫霞水电站预可、可研阶段补充测量外部供水线路二地形图（202111）1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393529763332097', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393530929348610', '1648881414313869314', '西藏自治区紫霞水电站预可、可研阶段补充测量外部供水线路一地形图（202111）1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393529763332097', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393531021623298', '1648881414313869314', '西藏自治区紫霞水电站预可、可研阶段补充测量霞曲汇口地形地类图（202111）1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393529763332097', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393531109703681', '1648881414313869314', '7-73-2021C94-紫霞水电站补充测绘工作-无人机归档资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393531168423937', NULL, '20220317杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393531206172673', '1648881414037045250', '2021C104  直孔抽蓄电站项目地形图-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393531269087233', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393531298447361', '1648881414037045250', '2021C104  直孔抽蓄电站项目地形图-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393531269087233', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393531386527745', '1648881414037045250', '西藏自治区拉萨河直孔抽蓄电站项目地形图', '2021年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393531269087233', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393531474608129', '1648881414037045250', '7-74-2021C104-直孔水电站抽水蓄能项目地形图测绘-卫片归档资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393531269087233', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393531579465729', '1648881414859128834', '2021C106老鹰岩水电站视频航飞测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393531646574594', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393531675934721', '1648881414859128834', '2021C106老鹰岩水电站视频航飞管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393531646574594', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393531764015105', '1648881414859128834', '老鹰岩水电站二级坝区1080P1019', '2021年', NULL, NULL, 'MP4', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393531831123970', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393531868872706', '1648881414859128834', '老鹰岩水电站一级坝址1080P1019', '2021年', NULL, NULL, 'MP4', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393531831123970', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393531956953090', '1648881415609909250', '2021W21-贵州省乌当(羊昌)至平塘高速公路地形图补测-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532019867650', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393532057616386', '1648881415609909250', '2021W21-贵州省乌当(羊昌)至平塘高速公路地形图补测-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532019867650', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393532149891073', '1648881415609909250', 'G7611贵州省乌当(羊昌)至平塘高速公路放大地形图1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532019867650', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393532237971458', '1648881415609909250', '贵州高速断面正式成果', '2021年', NULL, '14', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532019867650', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393532326051841', '1648881415609909250', '2018W17-G7611贵州省乌当(羊昌)至平塘高速公路地形图1：2000', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532019867650', NULL, '引用2018数据', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393532418326529', '1648881415609909250', 'DEM-（高斯投影，CGCS2000椭球，中央子午线107°08′47″，独立坐标系）', '2021年', NULL, '0', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532019867650', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393532510601217', '1648881415609909250', '贵州公路B投影补测-原图接边2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532019867650', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393532602875905', '1648881415609909250', '贵州省乌当(羊昌)至平塘高速公路地形图-补测2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532019867650', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393532690956289', '1648881416377466882', '01 GPS观测数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532758065153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393532795813889', '1648881416377466882', '02 卫星可见性预报表和GPS观测记录手簿', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532758065153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393532888088577', '1648881416377466882', '03 五等导线观测手簿', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532758065153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393532980363265', '1648881416377466882', '04 三角高程观测手簿', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532758065153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393533072637953', '1648881416377466882', '05 界桩观测手簿', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532758065153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393533160718337', '1648881416377466882', '06 计算资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532758065153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393533252993026', '1648881416377466882', '07 界桩点之记和库区淹没红线图', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532758065153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393533341073409', '1648881416377466882', '08 测量报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532758065153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393533429153793', '1648881416377466882', '09 检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532758065153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393533521428481', '1648881416377466882', '10 控制、界桩成果表', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532758065153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393533617897474', '1648881416377466882', '11 仪器检定资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532758065153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393533710172162', '1648881416377466882', '12 技术设计书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532758065153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393533798252546', '1648881416377466882', '验收资料(1215)', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532758065153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393533890527233', '1648881416377466882', '四川省 西藏自治区 金沙江上游管理记录资料（№.2021C14）(1)', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393532758065153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393533982801922', '1648881414905266178', '2021C70泸定华电营地武警中队地形图测量-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393534049910785', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393534100242433', '1648881414905266178', '2021C70泸定华电营地武警中队地形图测量管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393534049910785', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393534263820290', '1648881414905266178', '四川省泸定县华电营地安置场地地形图（202109）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393534049910785', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393534414815234', '1648881414905266178', '四川省泸定县华电营地地形图(202109)1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393534049910785', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393534507089922', '1648881414905266178', '四川省泸定县武警中队安置场地地形图（202109）1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393534049910785', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393534645501953', '1648881414905266178', '四川省泸定县武警中队地形图（202109）1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393534049910785', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393534741970945', '1648881414905266178', '7-78-2021C70-泸定华电营地及武警中队地形图测量原始数据及航飞归档资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393534863605761', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393534909743106', '1648881415395999745', '7-70-2021W26-达州绕城高速公路测绘第一部分 原始数据-激光', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光', NULL, '1651393534981046273', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393535018795009', '1648881415395999745', '1-外业测量地物', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393535115264002', '1648881415395999745', '2-坐标转换', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393535207538689', '1648881415395999745', '3-水准测量', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393535438225409', '1648881415395999745', '达州绕城高速公路1：2000地形图', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393535534694402', '1648881415395999745', '达州铁山隧道出口1：500地形图', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393535622774785', '1648881415395999745', '达州主线陡崖段1：500地形图', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393535710855170', '1648881415395999745', '1-2021W26-四川省达州市达州绕城高速公路测绘-技术设计书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393535803129858', '1648881415395999745', '2-2021W26-四川省达州市达州绕城高速公路测绘-计算资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393535891210241', '1648881415395999745', '3-2021W26-四川省达州市达州绕城高速公路测绘-成果表(独立坐标系）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393535983484929', '1648881415395999745', '4-2021W26-四川省达州市达州绕城高速公路测绘-成果表(CGCS2000）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393536071565313', '1648881415395999745', '5-2021W26-四川省达州市达州绕城高速公路测绘-技术总结', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393536159645697', '1648881415395999745', '6-四川省达州市达州绕城高速公路测绘检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393536243531777', '1648881415395999745', '7-四川省达州市达州绕城高速公路测绘数学精度检查表', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393536331612161', '1648881415395999745', '8-2021W26-四川省达州市达州绕城高速公路测绘-点之记', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393536419692546', '1648881415395999745', '9-2021W26-四川省达州市达州绕城高速公路测绘-GPS测量记录簿', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393536511967233', '1648881415395999745', '10-2021W26-四川省达州市达州绕城高速公路测绘-地物点（散点）记录', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393536683933697', '1648881415395999745', '11-2021W26-四川省达州市达州绕城高速公路测绘-仪器检定证书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393536772014082', '1648881415395999745', '12-2021W26-四川省达州市达州绕城高速公路测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393536855900162', '1648881415395999745', '达州绕城高速公路西段初步设计阶段过程咨询外业验收报告-测量', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393535081709570', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393536943980545', '1648881415949647874', '2021C35-溪洛渡配合工作单', '2021年', NULL, '8', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393537006895105', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393537036255233', '1648881416536850434', '2021C07四川省金沙江溪洛渡水电站金阳县、雷波县沿江县乡复建公路病害治理测量地形图测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393537099169794', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393537132724226', '1648881416536850434', '2021C07四川省金沙江溪洛渡水电站金阳县、雷波县沿江县乡复建公路病害治理测量-管理记录资料（含检查记录）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393537099169794', NULL, '缺纸质版归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393537220804610', '1648881416536850434', '四川省金沙江溪洛渡水电站金阳县、雷波县沿江县乡复建公路病害治理金阳六标春江桥地形图（202102）', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393537099169794', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393537308884994', '1648881416536850434', '四川省金沙江溪洛渡水电站金阳县、雷波县沿江县乡复建公路病害治理金阳四标溜砂坡地形图（202102）', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393537099169794', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393537396965378', '1648881416536850434', '四川省金沙江溪洛渡水电站金阳县、雷波县沿江县乡复建公路病害治理金阳一标段(二区)地形图（202102）', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393537099169794', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393537485045762', '1648881416536850434', '四川省金沙江溪洛渡水电站金阳县、雷波县沿江县乡复建公路病害治理金阳一标段(三区)地形图（202102）', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393537099169794', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393537577320449', '1648881416536850434', '四川省金沙江溪洛渡水电站金阳县、雷波县沿江县乡复建公路病害治理金阳一标段(四区)地形图（202102）', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393537099169794', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393537665400833', '1648881416536850434', '四川省金沙江溪洛渡水电站金阳县、雷波县沿江县乡复建公路病害治理金阳一标段(一区)地形图（202102）', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393537099169794', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393537761869826', '1648881416536850434', '四川省金沙江溪洛渡水电站金阳县、雷波县沿江县乡复建公路病害治理金阳一标段(一区)地形图（202102）', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393537099169794', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393537849950209', '1648881416536850434', '四川省金沙江溪洛渡水电站金阳县、雷波县沿江县乡复建公路病害治理雷波县岩湾隧道进出口(一区)地形图（202102）', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393537099169794', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393537954807809', '1648881414729105410', '2021C76 - 四川省老鹰岩一级水电站什月河地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393538021916674', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393538055471106', '1648881414729105410', '2021C76 - 四川省老鹰岩一级水电站什月河地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393538021916674', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393538147745794', '1648881414729105410', '2021C76 - 什月河横断面累距成果表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393538021916674', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393538240020482', '1648881414729105410', '2021C76 - 什月河横断面测量原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393538021916674', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393538332295169', '1648881414729105410', '大渡河老鹰岩一级水电站什月河地形图（202109）500-CGCS2000、工程坐标系.', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393538021916674', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393538416181249', '1648881414729105410', '7-80-2021C76 - 长河坝什月河地形图测绘-*无人机', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393538483290114', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393538521038849', '1648881414020268033', '宝山镇羿子村2组 金沙江坐标系', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393538588147714', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393538621702145', '1648881414020268033', '宝山镇羿子村2组影响区范围坐标', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393538588147714', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393538718171137', '1648881414020268033', '宝山镇羿子村2组影响区土地图斑地类登记表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393538588147714', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393538810445826', '1648881414020268033', '卡哈洛乡卡坪村3组（原4组） 金沙江坐标系', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393538588147714', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393538898526209', '1648881414020268033', '卡哈洛乡卡坪村3组（原4组）影响区范围坐标', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393538588147714', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651393538990800897', '1648881414020268033', '卡哈洛乡卡坪村3组（原4组）影响区土地图斑地类登记表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393538588147714', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491714154364929', '1651491619774136322', '土地确权参考文献', '2021年', NULL, '8', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714217279490', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491714255028225', '1651491619774136322', '验收方案', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714217279490', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491714338914306', '1651491619774136322', '调查表、检查记录等', '2021年', NULL, '8', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714217279490', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491714422800385', '1651491619916742657', '（重庆市两江新区）B25道路及配套工程排水管道内窥试验检测报告CCTV检 测 报 告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714506686465', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491714548629505', '1651491619916742657', 'B25道路及配套工程检测图片', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714506686465', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491714632515586', '1651491619916742657', 'B25道路及配套工程检测视频', '2021年', NULL, NULL, 'MP4', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714506686465', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491714720595969', '1651491619975462913', '新建重庆至黔江铁路站前6标精测网第2次复测技术方案', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714779316225', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491714812870658', '1651491619975462913', '新建重庆至黔江铁路站前6标精测网第2次复测技术总结报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714779316225', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491714905145346', '1651491619975462913', '新建重庆至黔江铁路站前6标精测网第2次复测平差报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714779316225', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491715119054850', '1651491619975462913', '新建重庆至黔江铁路站前6标施工加密控制网第2次测量平差报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714779316225', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491715219718146', '1651491619975462913', '新建重庆至黔江铁路站前6标施工加密控制网第2次复测技术总结报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714779316225', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491715303604226', '1651491619975462913', '新建重庆至黔江铁路站前6标施工控制网第二次加密测量技术方案', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714779316225', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491715391684609', '1651491619975462913', '既有资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714779316225', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491715475570690', '1651491619975462913', '平面控制网', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714779316225', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491715567845378', '1651491619975462913', '高程控制网', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714779316225', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491715651731458', '1651491619916742657', '横五支路北段道路及配套工程（k0+038.303~k0+680）段内窥试验检测（20210326(2)-CCTV检 测 报 告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714506686465', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491715735617538', '1651491619916742657', '横五支路北段道路及配套工程检测图片', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714506686465', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491715865640962', '1651491619916742657', '横五支路北段道路及配套工程检测视频', '2021年', NULL, NULL, 'MP4', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491714506686465', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491715949527041', '1654408468589445121', '四川省广元市西北河利州区河段河湖管理范围划定实施方案', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491716008247297', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491716037607426', '1651491620013211650', '拱桥河划定报告、成果图', '2021年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491716008247297', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491716121493505', '1651491620013211650', '白桥河划定报告、成果图', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491716008247297', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491716205379586', '1651491620013211650', '白溪浩河划定报告、成果图', '2021年', NULL, NULL, 'word/dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491716008247297', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491716285071362', '1651491620013211650', '白驿河划定报告、成果图', '2021年', NULL, NULL, 'word/dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491716008247297', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491716368957442', '1651491620013211650', '苟溪河划定报告、成果图', '2021年', NULL, NULL, 'word/dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491716008247297', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491716452843522', '1651491620013211650', '龙溪河划定报告、成果图', '2021年', NULL, NULL, 'word/dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491716008247297', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491716528340994', '1651491620013211650', '沙溪浩划定报告、成果图', '2021年', NULL, NULL, 'word/dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491716008247297', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491716612227074', '1651491620013211650', '严家河划定报告、成果图', '2021年', NULL, NULL, 'word/dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491716008247297', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491716696113154', '1651491620013211650', '鸳溪河划定报告、成果图', '2021年', NULL, NULL, 'word/dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491716008247297', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491716775804929', '1651491620013211650', '张家沟划定报告、成果图', '2021年', NULL, NULL, 'word/dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491716008247297', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491716855496706', '1651491620050960385', '矢量数据', '2021年', NULL, NULL, 'shp', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491716914216961', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491716943577089', '1648881415362445314', '“互联网+”举证成果', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491717002297345', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491717035851778', '1648881415362445314', '四川省泸州市泸县(510521)2020年度变更调查田坎系数上图入库成果', '2021年', NULL, NULL, 'gdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491717002297345', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491717115543553', '1648881415362445314', '更新数据包', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491717002297345', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491717199429633', '1648881415362445314', '其他资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491717002297345', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491717279121409', '1648881415362445314', '扫描资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491717002297345', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491717363007490', '1648881415362445314', '数据库检查结果', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491717002297345', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491717442699266', '1648881415362445314', '2020(510521)土地利用变化情况分析报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491717002297345', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491717522391042', '1651491620084514817', '工作底图', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491717581111297', NULL, '永鸿归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491717614665729', '1651491620084514817', '界址点成果表、宗地图', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491717581111297', NULL, '永鸿归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491717694357506', '1651491620084514817', '锦江区乱占耕地数据4', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491717581111297', NULL, '永鸿归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491717778243586', '1651491620118069250', '城区1：500地形图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491717878906881', NULL, '永鸿归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491717908267009', '1651491620118069250', '全市管网综合图总图(2015.5)年', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491717878906881', NULL, '永鸿归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491717992153090', '1654408468736245761', '邛崃管线范围线2000坐标系', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491717878906881', NULL, '永鸿归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491718076039170', '1651491620118069250', '邛崃管探原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491717878906881', NULL, '永鸿归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491718164119553', '1651491620155817986', '深溪沟消力池及泄洪洞进出口水下检测及检查服务工作报告', '2021年', NULL, '8', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491718227034114', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491718260588545', '1651491620189372417', '数据库', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491718319308802', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491718365446145', '1651491620189372417', '城中镇基础资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491718319308802', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491718478692354', '1651491620189372417', '城中镇DOM', '2021年', NULL, '1', 'tif', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491718319308802', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491718558384129', '1651491620222926849', '1#工程建设勘界图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491718617104386', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491718650658818', '1651491620222926849', '实物指标调查表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491718617104386', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491718780682241', '1651491620222926849', '1#工程建设区勘界报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491718617104386', NULL, '张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491718864568322', '1651491620260675586', '岸线规划（凯江、郪江、魏成河、梓江）附图、报告', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491718927482881', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491718956843010', '1651491620260675586', '三台县“十四五”水安全保障规划（附图、附表、文本）', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491718927482881', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491719044923393', '1651491620260675586', '水利空间规划', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491718927482881', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491719128809473', '1648881416901754881', '1-las', '2021年', NULL, NULL, 'las', NULL, NULL, NULL, NULL, NULL, NULL, '激光', NULL, '1651491719187529729', NULL, '刘媛媛', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491719216889858', '1648881416901754881', '4-航线分布索引图', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '激光', NULL, '1651491719187529729', NULL, '刘媛媛', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491719304970241', '1648881416482324482', '1-las', '2021年', NULL, NULL, 'las', NULL, NULL, NULL, NULL, NULL, NULL, '激光', NULL, '1651491719363690498', NULL, '刘媛媛', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491719401439234', '1648881416482324482', '2-外业检查点文件', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, '激光', NULL, '1651491719363690498', NULL, '刘媛媛', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491719485325313', '1648881416482324482', '4-航线分布索引图', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '激光', NULL, '1651491719363690498', NULL, '刘媛媛', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491719565017089', '1648881416482324482', '5-影像及相机POS', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, '激光', NULL, '1651491719363690498', NULL, '刘媛媛', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491719648903169', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DLG)成果清单', '2021年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491719745372161', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DLG)完成情况分布图', '2021年', NULL, NULL, 'mdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491719837646850', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DLG)分区CAD数据', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491720034779138', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DLG)分区MDB数据', '2021年', NULL, NULL, 'mdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491720181579777', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DLG)分区结合表', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491720269660162', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DLG)元数据', '2021年', NULL, NULL, 'mdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491720395489282', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DLG)仪器检定证书', '2021年', NULL, '8', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491720521318401', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DLG)技术设计书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491720613593089', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DLG)检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491720697479170', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DLG)技术总结报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491720785559553', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DLG)检验报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491720869445633', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DLG)完成情况分布图', '2021年', NULL, NULL, 'mdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491720953331714', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DOM)成果清单', '2021年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491721037217794', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DOM)像控点资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491721121103874', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DOM)DOM影像成果', '2021年', NULL, NULL, 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491721204989954', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DOM)元数据', '2021年', NULL, NULL, 'mdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491721288876033', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DOM)技术设计书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491721376956417', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DOM)检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491721465036801', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DOM)技术总结报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491721620226049', '1651491620298424322', '成都市蒲江县1：500系列测绘产品(DOM)检验报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491721704112129', '1651491620298424322', '入库通知单', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491719707623426', NULL, '外单拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491721787998210', '1651491620331978754', '三岩龙影像', '2021年', NULL, NULL, 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491721846718465', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491721880272897', '1651491620331978754', '1--四川省甘孜州九龙县三岩龙沟1：2000地形图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491721846718465', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491721968353281', '1651491620331978754', '2--四川省甘孜州九龙县三岩龙沟河湖管理范围划定实施方案', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491721846718465', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491722052239362', '1651491620331978754', '3--四川省甘孜州九龙县三岩龙沟河湖管理范围划定报告（审定稿）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491721846718465', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491722136125442', '1651491620331978754', '4--四川省甘孜州九龙县三岩龙沟河湖管理范围划定项目测绘专业技术设计书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491721846718465', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491722224205825', '1651491620331978754', '5--四川省甘孜州九龙县三岩龙沟河湖管理范围划定项目测绘专业技术总结', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491721846718465', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491722308091906', '1651491620331978754', '6--四川省甘孜州九龙县三岩龙沟河湖管理范围划定测绘检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491721846718465', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491722391977986', '1651491620331978754', '7--四川省甘孜州九龙县三岩龙沟河湖管理范围划定项目E级GPS控制点点之记', '2021年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491721846718465', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491722475864066', '1651491620331978754', '8--四川省甘孜州九龙县三岩龙沟河湖管理范围划定项目控制点成果表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491721846718465', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491722559750145', '1651491620331978754', '9--四川省甘孜州九龙县三岩龙沟河湖管理范围划定项目1：2000地形图外业检查图幅平面精度统计表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491721846718465', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491722643636225', '1651491620331978754', '10--四川省甘孜州九龙县三岩龙沟河湖管理范围划定项目1：2000地形图外业检查图幅等高线精度统计表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491721846718465', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491722727522305', '1651491620331978754', '11--四川省甘孜州九龙县三岩龙沟河湖管理范围划定管理线桩（牌）成果表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491721846718465', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491722823991297', '1651491620365533186', '1--子耳河--九龙县段河道管理线平面图（审定）', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491722916265986', '1651491620365533186', '2--子耳河--九龙县河段河湖管理范围划定实施方案', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491723000152066', '1651491620365533186', '3--子耳河--九龙县河段河流管理范围划定报告（审定稿）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491723079843841', '1651491620365533186', '4--子耳河--九龙县河段河湖管理范围划定项目测绘专业技术设计书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491723163729922', '1651491620365533186', '5--子耳河--九龙县河段河湖管理范围划定项目测绘专业技术总结', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491723251810306', '1651491620365533186', '6--子耳河--九龙县河段河湖管理范围划定测绘检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491723339890689', '1651491620365533186', '7--子耳河--九龙县河流管理范围划定项目E级GPS控制点点之记', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491723423776770', '1651491620365533186', '8--子耳河--九龙县河道管理范围划定项目控制点成果表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491723520245761', '1651491620365533186', '9--子耳河--九龙县河段河流管理范围划定项目1：2000地形图外业检查图幅平面精度统计表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491723612520449', '1651491620365533186', '10--子耳河--九龙县河段河流管理范围划定项目1：2000地形图外业检查图幅等高线精度统计表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491723797069825', '1651491620365533186', '11--子耳河--九龙县河湖管理范围划定管理线桩（牌）成果表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491723906121729', '1651491620365533186', '数据库-1：2000带状数据新测DEM', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491723990007810', '1651491620365533186', '数据库-1：2000带状数据新测DOM', '2021年', NULL, NULL, 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491724073893889', '1651491620365533186', '数据库-1：2000带状数据新测DLG', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491724157779969', '1651491620365533186', '数据库-1：2000带状数据新测河道断面成果', '2021年', NULL, NULL, 'xls/dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491724241666049', '1651491620365533186', '子耳河 移交证书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491724329746433', '1651491620365533186', '预检通知书', '2021年', NULL, '8', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651491722882711554', NULL, '李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491724413632513', '1648881416197111809', '西藏米林坝下-尼洋河口-直白段1：1000地形图及1：2000地形图测绘（机载激光第一部分原始数据）', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '激光', NULL, '1651491724476547074', NULL, '郎悟灵归档 ', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1651491724510101505', '1648881416197111809', '西藏米林坝下-尼洋河口段-尼洋河口至林芝市区-激光数据归档第二部分-成果文件', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '激光', NULL, '1651491724476547074', NULL, '尹超归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688851365199874', '1648881419619663874', '德阳市罗江区自然资源局全域1：500数字化地形（地籍）测量和全域宅基地房地合一颁证项目成果质量检验报告 ', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688851394560002', NULL, ' 20230213夏夏归档（测绘局检查）', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688851474251778', '1648881416742371330', '四川省脚木足河巴拉水电站工程区内原始项目地形测绘第一部分原始数据激光数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光扫描', NULL, '1654688851507806209', NULL, '20210709郎悟灵归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688851545554945', '1648881416721399809', '第一部分-汉源车载激光-原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光扫描', NULL, '1654688851574915073', NULL, '20210709郎悟灵归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688851612663809', '1648881416721399809', '第一部分-汉源机载激光-原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '车载激光扫描', NULL, '1654688851574915073', NULL, '20210709郎悟灵归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688851675578369', '1654408468295843841', '01沱东片区报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688851709132801', NULL, '20221014吴凯归档报告文件', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688851746881538', '1654408468295843841', '02沱西一片区报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688851709132801', NULL, '20221014吴凯归档报告文件', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688851813990401', '1654408468295843841', '03沱西二片区报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688851709132801', NULL, '20221014吴凯归档报告文件', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688851897876481', '1654408468295843841', '04资水河报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688851709132801', NULL, '20221014吴凯归档报告文件', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688851977568257', '1654408468295843841', '05附件', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688851709132801', NULL, '20221014吴凯归档报告文件', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852044677122', '1654408468295843841', '06其他资料', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688851709132801', NULL, '20221014吴凯归档报告文件', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852099203073', '1654408468295843841', '检查报告（简阳）10.11', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688851709132801', NULL, '20221014吴凯归档报告文件', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852157923330', '1654408468295843841', '四川省河湖管理范围划定成果数据（简阳市18条河）', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688851709132801', NULL, '20210721外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852220837890', '1654408468413284354', '南部县入库数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688852254392322', NULL, '20210812外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852296335361', '1654408468413284354', '预检通知书', '2021年', NULL, '8', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688852254392322', NULL, '20210812外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852359249922', '1654408468413284354', '专家意见', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688852254392322', NULL, '20210812外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852417970177', '1648881415458914305', '成果DOM', '2021年', NULL, '1', 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768888875188226', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852472496130', '1648881415458914305', '三维模型-FBX', '2021年', NULL, '3', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1650768888875188226', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852531216385', '1654408468501364737', '大柴旦三调数据汇总1--数据成果', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688852560576513', NULL, '20210823李禺归档 拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852598325250', '1654408468501364737', '大柴旦三调数据汇总2--图件成果', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688852560576513', NULL, '20210823李禺归档 拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852657045506', '1654408468501364737', '大柴旦三调数据汇总3--文字成果', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688852560576513', NULL, '20210823李禺归档 拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852715765762', '1654408468501364737', '大柴旦三调数据汇总4--数据库成果', '2021年', NULL, NULL, 'gdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688852560576513', NULL, '20210823李禺归档 拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852770291714', '1654408468501364737', '大柴旦三调数据汇总5--外业调查成果', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688852560576513', NULL, '20210823李禺归档 拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852829011970', '1654408468501364737', '乌兰县三调数据汇总1--数据成果', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688852560576513', NULL, '20210823李禺归档 拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852891926529', '1654408468501364737', '乌兰县三调数据汇总2--图件成果', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688852560576513', NULL, '20210823李禺归档 拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688852971618305', '1654408468501364737', '乌兰县三调数据汇总3--文字成果', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688852560576513', NULL, '20210823李禺归档 拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853030338562', '1654408468501364737', '乌兰县三调数据汇总4--数据库成果', '2021年', NULL, NULL, 'gdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688852560576513', NULL, '20210823李禺归档 拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853084864513', '1654408468501364737', '乌兰县三调数据汇总5--外业调查成果', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688852560576513', NULL, '20210823李禺归档 拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853143584770', '1654408468518141953', '511623邻水县检查结果_包1', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853206499330', '1654408468518141953', '承包地统计表_包1', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853265219585', '1654408468518141953', '邻水县511623质检报告20200917_包1', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853323939841', '1654408468518141953', '汇总表格_包1', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853382660097', '1654408468518141953', '权属来源资料_包1', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853441380354', '1654408468518141953', '权属数据_包1', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853500100609', '1654408468518141953', '矢量数据_包1', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853554626561', '1654408468518141953', '文字报告_包1', '2021年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853609152514', '1654408468518141953', '图件_包1', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853667872770', '1654408468518141953', '511623邻水县检查结果_包3', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853726593025', '1654408468518141953', '承包地统计表_包3', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853806284801', '1654408468518141953', '邻水县511623质检报告20200917_包3', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853865005058', '1654408468518141953', '汇总表格_包3', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853927919618', '1654408468518141953', '权属来源资料_包3', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688853986639873', '1654408468518141953', '权属数据_包3', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688854049554433', '1654408468518141953', '矢量数据_包3', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688854104080385', '1654408468518141953', '文字报告_包3', '2021年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688854162800642', '1654408468518141953', '图件_包3', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688853172944897', NULL, '20210823朱静归档   硬盘拷贝', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688854221520898', '1651491619916742657', '金开大道（金州大道节点）改造工程道路排水管道内窥实验检测-两江新区排水管网CCTV检 测 报 告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854255075330', NULL, '夏夏存档20211119', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688854292824066', '1651491619916742657', '复勘点号-金开大道（金州大道节点）改造工程', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854255075330', NULL, '夏夏存档20211119', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688854355738626', '1651491619916742657', '金开大道（金州大道节点）-金开大道（金州大道节点）改造工程', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854255075330', NULL, '夏夏存档20211119', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688854414458881', '1651491619916742657', '原始数据MP4 -金开大道（金州大道节点）改造工程', '2021年', NULL, NULL, 'MP4', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854255075330', NULL, '夏夏存档20211119', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688854473179137', '1651491619916742657', '图片-金开大道（金州大道节点）改造工程', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854255075330', NULL, '夏夏存档20211119', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688854536093698', '1654408468543307777', '新邱区第三次国土调查项目实施方案（4 包）新邱区(210903)第三次土地调查实施方案-4分包', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854640951298', NULL, '20211123张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688854703865857', '1654408468543307777', '新邱区(210903)第三次国土调查耕地细化调查专题报告-4分包', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854640951298', NULL, '20211123张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688854796140545', '1654408468543307777', '新邱区(210903)第三次国土调查工作报告-4分包', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854640951298', NULL, '20211123张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688854884220930', '1654408468543307777', '新邱区(210903)第三次国土调查技术报告-4分包', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854640951298', NULL, '20211123张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688854972301313', '1654408468543307777', '新邱区(210903)第三次国土调查批准未建设的建设用地调查专题报告-4分包', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854640951298', NULL, '20211123张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688855068770305', '1654408468543307777', '新邱区(210903)第三次国土调查专检报告及记录-4分包', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854640951298', NULL, '20211123张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688855161044994', '1654408468543307777', '新邱区(210903)第三次国土调查自查自纠报告及问题图斑列表-4分包', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854640951298', NULL, '20211123张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688855253319682', '1654408468543307777', '新邱区(210903)第三次国土调查自检报告及记录-4分包', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854640951298', NULL, '20211123张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688855345594369', '1654408468543307777', '18包第三次全国国土调查成果国家级外业核查实施方案_合同', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854640951298', NULL, '20211123张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688855433674754', '1654408468543307777', '第三次全国国土调查成果国家级外业核查项目工作报告18包', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854640951298', NULL, '20211123张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688855496589314', '1654408468543307777', '第三次全国国土调查成果国家级外业核查项目决算报告18包', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854640951298', NULL, '20211123张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688855563698178', '1654408468543307777', '外协项目实施方案(23包四川中水成勘院）', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854640951298', NULL, '20211123张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688855639195650', '1654408468543307777', '1_第三次全国国土调查成果国家级内业核查-第23包决算报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854640951298', NULL, '20211123张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688855697915905', '1654408468543307777', '2_第三次全国国土调查成果国家级内业核查项目-第23包工作报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688854640951298', NULL, '20211123张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688855756636162', '1654408468564279298', '四川德阳高速图根点成果成都结算', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688855785996290', NULL, '山海测绘成果20210823李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688855823745026', '1654408468564279298', '渝筠高速像控点成果-成都结算', '2021年', NULL, NULL, 'txt', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688855785996290', NULL, '山海测绘成果20210823李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688855878270978', '1654408468589445121', '广元市苍溪县河段河湖管理范围划定(报告\\图纸\\失量文件\\DEM\\DLG\\DOM河道断面成果)', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688855911825410', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688855970545666', '1654408468589445121', '广元市利州区河段河湖管理范围划定(报告\\图纸\\失量文件\\DEM\\DLG\\DOM河道断面成果)', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688855911825410', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688856121540609', '1654408468589445121', '广元市青川县河段河湖管理范围划定(报告\\图纸\\失量文件\\DEM\\DLG\\DOM河道断面成果)', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688855911825410', NULL, '20210908张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688856226398210', '1648881415878344705', '1-直白至扎曲激光正式成果（ML-94°30′-85高）', '2021年', NULL, '7', 'las', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688856301895682', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688856348033026', '1648881415878344705', '2-直白至扎曲激光正式成果正射影像', '2021年', NULL, '1', 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688856301895682', NULL, '（何杰制作）', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688856448696322', '1648881415878344705', 'UTM-46-点云分幅图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688856301895682', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688856599691266', '1648881415446331394', '雅砻江官地电力生产项目打罗沟泥石流治理1：2000-DOM', '2021年', NULL, '1', 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688856662605825', NULL, '尹超202110归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688856704548865', '1648881415446331394', '雅砻江官地电力生产项目打罗桥以下-雅砻江1：500-DOM', '2021年', NULL, '1', 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688856662605825', NULL, '尹超202110归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688856771657730', '1648881415446331394', '雅砻江官地电力生产项目金打公路K6+750泥石流治理段1：500-DOM', '2021年', NULL, '1', 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688856662605825', NULL, '尹超202110归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688856842960897', '1648881415446331394', '雅砻江官地电力生产项目竹子坝西侧沟取水口1：500-DOM', '2021年', NULL, '1', 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688856662605825', NULL, '尹超202110归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688856914264065', '1648881415446331394', '雅砻江官地电力生产项目打罗沟泥石流治理1：2000模型', '2021年', NULL, '3', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688856662605825', NULL, '尹超202110归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688856981372930', '1648881415446331394', '雅砻江官地电力生产项目打罗桥以下-雅砻江1：500模型', '2021年', NULL, '3', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688856662605825', NULL, '尹超202110归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857052676097', '1648881415446331394', '雅砻江官地电力生产项目金打公路K6+750泥石流治理段1：500模型', '2021年', NULL, '3', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688856662605825', NULL, '尹超202110归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857119784962', '1648881415446331394', '雅砻江官地电力生产项目竹子坝西侧沟取水口1：500模型', '2021年', NULL, '3', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688856662605825', NULL, '尹超202110归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857191088130', '1654408468614610946', '7-39-美姑农村土地确权20211008江国政提交', '2012年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688857237225474', NULL, '江国政归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857270779906', '1654408468614610946', '1-美姑宅基地使用权资料', '2012年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688857237225474', NULL, '江国政归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857329500162', '1654408468614610946', '2-美姑使用权验收报告（2021)', '2012年', NULL, '8', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688857237225474', NULL, '江国政归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857388220418', '1654408468614610946', '3-美姑农村土地确权户籍（一标段中水测绘公司）', '2012年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688857237225474', NULL, '江国政归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857446940674', '1654408468614610946', '4-指界通知书权属来源证明身份证及证明', '2012年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688857237225474', NULL, '江国政归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857501466625', '1654408468614610946', '5-美姑集体土地确权文字资料', '2012年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688857237225474', NULL, '江国政归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857560186881', '1654408468614610946', '6-美姑集体土地所有权资料', '2012年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688857237225474', NULL, '江国政归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857618907137', '1654408468614610946', '美姑交公司资料清单', '2012年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688857237225474', NULL, '江国政归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857677627393', '1654408468614610946', '7-集体土地所有权证书登记汇总(20141209)', '2012年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688857237225474', NULL, '江国政归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857736347649', '1654408468614610946', '美姑县代码', '2012年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688857237225474', NULL, '江国政归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857795067905', '1654408468639776770', 'DLG', '2021年', NULL, NULL, 'shp', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688857824428033', NULL, '刘媛媛2020归档 ', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857862176770', '1654408468639776770', 'DOM', '2021年', NULL, NULL, 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688857824428033', NULL, '刘媛媛2020归档 ', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857916702722', '1654408468639776770', 'GNSS', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688857824428033', NULL, '刘媛媛2020归档 ', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688857979617282', '1654408468639776770', '地形图', '2021年', NULL, NULL, 'shp', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688857824428033', NULL, '刘媛媛2020归档 ', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688858034143233', '1654408468639776770', '水准点', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688857824428033', NULL, '刘媛媛2020归档 ', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688858092863490', '1654408468664942593', '（511504）叙州区第三次全国国土调查成果（含数据）', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688858122223617', NULL, '20211202张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688858164166657', '1654408468664942593', '叙州区第三次全国国土调查实施方案', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688858122223617', NULL, '20211202张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688858336133122', '1654408468664942593', '(511504)叙州区各类土地分类数据', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688858122223617', NULL, '20211202张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688858436796417', '1654408468664942593', '(511504)叙州区外业调查成果', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688858122223617', NULL, '20211202张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688858491322370', '1654408468664942593', '(511504)叙州区数据库成果', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688858122223617', NULL, '20211202张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688858554236929', '1654408468664942593', '(511504)叙州区图件成果', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688858122223617', NULL, '20211202张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688858617151489', '1654408468664942593', '(511504)叙州区文字成果', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688858122223617', NULL, '20211202张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688858763952129', '1654408468664942593', '(511504)叙州区信息系统成果', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688858122223617', NULL, '20211202张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688858839449601', '1654408468664942593', '1.矢量空间数据', '2021年', NULL, NULL, 'shp', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688858122223617', NULL, '202304011周芝归档含光盘', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688858893975554', '1654408468664942593', '3.属性表格数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688858122223617', NULL, '202304011周芝归档含光盘', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688858952695810', '1654408468664942593', '4.元数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688858122223617', NULL, '202304011周芝归档含光盘', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688859011416066', '1654408468664942593', '5.其他数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688858122223617', NULL, '202304011周芝归档含光盘', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688859070136322', '1654408468664942593', '统一时点更新年末库数据（下发）', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688858122223617', NULL, '202304011周芝归档含光盘', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688859124662273', '1648881416620736513', '01-管理范围划定技术设计书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688859195965442', '1648881416620736513', '02-管理范围划定技术总结', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688859267268609', '1648881416620736513', '03-管理范围划定检查报告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688859321794561', '1648881416620736513', '04-管理范围划定实施方案', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688859380514818', '1648881416620736513', '05-管理范围划定报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688859435040770', '1648881416620736513', '06-埋石控制网点之记', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688859493761025', '1648881416620736513', '07-图幅编号图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688859548286978', '1648881416620736513', '08-管理线桩(牌)成果表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688859602812929', '1648881416620736513', '09-管理线桩(牌)点及河道管理线平面图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688859661533186', '1648881416620736513', '10-河道断面成果表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688859720253441', '1648881416620736513', '11-河道断面采集散点数据', '2021年', NULL, NULL, 'txt', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688859791556609', '1648881416620736513', '12-河道断面图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688859858665474', '1648881416620736513', '13-河道断面采集散点图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860001271810', '1648881416620736513', '14-河道带状地形图(带断面线及编号)', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860076769281', '1648881416620736513', '15-断面测量日期记录文件', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860139683842', '1648881416620736513', '16-像控点点之记', '2021年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860198404098', '1648881416620736513', '17-像控点数据', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860261318658', '1648881416620736513', '18-像控点分布图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860328427521', '1648881416620736513', '19-像控点检查成果表', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860391342082', '1648881416620736513', '20-名山区七条河入库成果', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860450062338', '1648881416620736513', '名山河湖划界交接单', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860504588290', '1648881416620736513', '四川省雅安市名山区河道划界项目验收鉴定书扫描件', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688859154022401', NULL, '李禺20211101归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860563308545', '1654408468690108418', '00农经权户籍', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860626223106', '1654408468690108418', '01接收数据', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860684943362', '1654408468690108418', '03进度', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860743663618', '1654408468690108418', '04奥维数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860798189570', '1654408468690108418', '05核实资料', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860852715521', '1654408468690108418', '06公示资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860907241473', '1654408468690108418', '07户籍扫描资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688860961767425', '1654408468690108418', '08草图扫描件', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688861070819329', '1654408468690108418', '09底图扫描件', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688861129539585', '1654408468690108418', '10现场、宣传照片', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688861188259841', '1654408468690108418', '11公示照片', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688861251174401', '1654408468690108418', '12权利人名单', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688861305700354', '1654408468690108418', '13监理抽查', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688861368614913', '1654408468690108418', '14公示后修改', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688861427335169', '1654408468690108418', '15公示后新增照片', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688861490249729', '1654408468690108418', '16工作照片', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688861557358594', '1654408468690108418', '17过程', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688861616078850', '1654408468690108418', '奥维绘制', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688861670604801', '1654408468690108418', '四乡镇W数据.gdb', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688861729325058', '1654408468690108418', '阳山数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688861788045313', '1654408468690108418', '15公示后新增照片', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688861855154177', '1654408468690108418', '检定证书2020-仅限阳山县“房地一体”农村不动产登记发证工作服务项目（片区四）验收使用', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688862010343425', '1654408468690108418', '检定证书2021-仅限阳山县“房地一体”农村不动产登记发证工作服务项目（片区四）验收使用', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688862106812417', '1654408468690108418', '阳山县房地一体各村进度概况', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688860592668673', NULL, '周芝20211108归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688862190698498', '1654408468711079938', '成都高新西区控制点资料', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688862232641537', NULL, '20211126李胜才归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688862270390273', '1648881419619663874', '罗江项目-新盛镇金岭村宗地示意图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688862320721921', NULL, '20211210外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688862358470657', '1648881419619663874', '罗江项目-新盛镇金岭村房产分户分层图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688862320721921', NULL, '20211210外单位归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688862438162434', '1654408468736245761', '成都市地下管线普查等级控制点 （彭州市）', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688862467522561', NULL, '20211129李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688862501076994', '1654408468736245761', '成都市地下管线普查控制点点之记', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688862467522561', NULL, '20211129李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654688862555602945', '1654408468736245761', '成都市地下管线普查控制点点之记邛崃', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654688862467522561', NULL, '20211129李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729346623733762', '1648881516910739458', '广东省第三次全国国土调查中山市监理资料汇编', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948474205175809', NULL, '20220228张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729346707619842', '1648881516910739458', '中山市第三次全国国土调查市级汇总成果验收意见', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948474205175809', NULL, '20220228张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729346766340097', '1648881516944293890', '栖霞市控制规划区域1：2000地形图测绘项目技术设计修订', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948474804961282', NULL, '20220330张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729346908946433', '1648881516944293890', '栖霞市控制规划区域1：2000地形图测绘项目技术总结修订', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948474804961282', NULL, '20220330张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729346988638209', '1648881516944293890', '栖霞市控制规划区域1：2000地形图测绘项目验收单', '2022年', NULL, '8', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948474804961282', NULL, '20220330张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729347059941378', '1648881516977848321', '大型水电工程水平位移监测控制网稳定性已知系统分析法研究_四川中水成勘院测绘工程有限责任公司', '2022年', NULL, NULL, 'pptx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948475480244226', NULL, '（陈尚云202204存档）', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729347152216065', '1648881517011402754', '2022_04_26_三体系内审员培训证书', '2022年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948477241851905', NULL, '20220715张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729347328376833', '1648881517011402754', '2022年三体系内部审核、外部审核归档资料', '2022年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948477241851905', NULL, '20220715张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729347521314818', '1648881517049151490', '（街心花园）1-基坑成果资料', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948477929717761', NULL, '20220517夏夏归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729347655532545', '1648881517049151490', '（街心花园）2-新建主体沉降  ', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948477929717761', NULL, '20220517夏夏归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729347735224321', '1648881517049151490', '(广电片区) 2-新建主体沉降  ', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948477929717761', NULL, '20220517夏夏归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729347802333186', '1648881517049151490', '(广电片区)1-基坑成果资料', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948477929717761', NULL, '20220517夏夏归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729347865247745', '1648881517082705922', '一品金田村地形图', '2022年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948478101684225', NULL, '20220531张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729347923968002', '1648881517116260354', '成都市企业技术中心申报书-中水成勘院(1)', '2022年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948478193958914', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729347986882561', '1648881517149814785', '天星坝GPS点成果表', '2022年', NULL, '8', 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948478831493121', NULL, '20220620陈洪归档（最终成果）', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729348049797122', '1654408468736245761', '彭州市地下管线普查成果更新探测服务项目（第三包）数据成果资料', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948479313838082', NULL, '20220629张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729348112711682', '1654408468736245761', '彭州市地下管线普查成果更新探测服务项目（第三包）文字资料', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948479313838082', NULL, '20220629张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729348175626242', '1648881517216923650', '大疆数码相机参数标定报告(OV2DGCT - RA30683)', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948479607439361', NULL, '20221017陈尚云归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729348242735106', '1648881517216923650', '飞马数码相机参数标定报告(SN V-CAM100020290070)', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948479607439361', NULL, '20221017陈尚云归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729348381147137', '1648881517250478082', '泸县国土资源局泸县全国第三次国土调查采购项目_优秀工程申报表', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948479775211522', NULL, '20221013郎悟灵归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729348460838913', '1648881517284032513', '天府大道北延线2-新都区矢量(占地红线矢量及补划基农矢量）', '2022年', NULL, '2', 'shp', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948479867486209', NULL, '外协单位归档王小刚', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729348527947777', '1648881517284032513', '天府大道北延线规划局部调整审查报告', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948479867486209', NULL, '外协单位归档王小刚', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729348599250945', '1648881517284032513', '天府大道北延线土地利用总体规划修改方案暨永久基本农田补划方案', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948479867486209', NULL, '外协单位归档王小刚', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729348737662978', '1654408468736245761', '武侯区地下管线项目设计书', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948480119144450', NULL, '20221012朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729348817354754', '1654408468736245761', '武侯区地下管线自检报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948480119144450', NULL, '20221012朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729348888657922', '1654408468736245761', '武侯区地下管线成果总结报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948480119144450', NULL, '20221012朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729348951572482', '1654408468736245761', '武侯区地下管线监理总结报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948480119144450', NULL, '20221012朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729349014487041', '1654408468736245761', '武侯区地下管线成果核验确认单', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948480119144450', NULL, '20221012朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729349115150337', '1654408468736245761', '武侯区地下管线质检报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948480119144450', NULL, '20221012朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729349303894018', '1654408468736245761', '武侯区地下管线普查数据库', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948480119144450', NULL, '20221012朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729349433917441', '1654408468736245761', '武侯区地下管线综合管线成果图', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948480119144450', NULL, '20221012朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729349513609218', '1654408468736245761', '武侯区地下管线普查更新范围', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948480119144450', NULL, '20221012朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729349584912386', '1654408468736245761', '武侯区地下管线外部接边图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948480119144450', NULL, '20221012朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654729349748490241', '1648881516910739458', '中山市第三次全国国土调查项目监理报告', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654729349823987713', NULL, '陈尚云归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748602799226882', '1648881517414055938', '四川省测绘地理信息学会2022年科技创新型优秀单位奖申报表（签字盖章版）', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317776724852737', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748602887307265', '1648881517414055938', '2022四川省地理信息产业十佳单位申报表（盖章版）', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317776724852737', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748602937638913', '1648881517414055938', '2022年四川省地理信息产业”十佳单位“现场考核答辩汇报材料', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317776724852737', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748602996359170', '1654408468543307777', '第三次全国国土调查成果国家级内业核查（第23包）实施方案 验收报告', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317777072979969', NULL, '20221111夏夏归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603050885122', '1654408468543307777', '第三次全国国土调查成果国家级外业核查（第18包）实施方案 验收报告', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317777072979969', NULL, '20221111夏夏归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603122188290', '1648881517351141378', '自贡市2022年第34批次建设用地 9-16报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948481058668546', NULL, '20220920张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603176714241', '1648881517351141378', '自贡市2022年35批（8-25土地坐落加村集体）建设用地报告', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948481058668546', NULL, '20220920张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603231240194', '1648881517380501505', '霍尔果斯公路测量项目公路中心点成果提取', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948481230635010', NULL, '20220815陈尚云存档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603289960450', '1648881517380501505', '霍尔果斯公路测量项目边长投影变形计算', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948481230635010', NULL, '20220815陈尚云存档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603344486401', '1648881517380501505', '霍尔果斯公路测量项目分段投影模型计算', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948481230635010', NULL, '20220815陈尚云存档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603403206657', '1648881517380501505', '霍尔果斯公路测量项目控制点分段投影成果计算', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1648948481230635010', NULL, '20220815陈尚云存档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603457732610', '1648881517481164802', '仁怀市1：500 地形图', '2022年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317777999921153', NULL, '光盘 刘向东归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603512258561', '1648881517514719234', '敦化评审资料', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317778088001537', NULL, '20221209陈尚云归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603570978818', '1648881517514719234', '孟底沟施控网评审', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317778088001537', NULL, '20221209陈尚云归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603625504770', '1648881517514719234', '山东泰安二期抽蓄', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317778088001537', NULL, '20221209陈尚云归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603680030721', '1648881517548273665', '凉山州2021年度国土变更调查成果资料(含凉山州2021年度变更调查国家级核查通过证明)', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317778343854082', NULL, '20221206吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603734556674', '1648881517581828098', '龙泉驿区1：500系列数字测绘产品生产与更新项目DLG成果监理资料（含1批次-1检验报告）', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317778427740161', NULL, '20221208吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603789082626', '1648881517615382529', '邛崃市地下管线普查成果更新探测服务项目成果资料', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317778515820546', NULL, '20221129周芝归档-含光盘', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603847802881', '1648881517648936962', '华能大连市庄河海上风电场址 IV1 项目桩机检查中间成果 - (第四次)成勘院物探公司', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317778717147138', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603902328833', '1648881517686685697', '邻水县重点区域自然资源统一确权登记项目数据库检验报告', '2022年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1649317778817810433', NULL, '测绘局', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748603961049090', '1648881517716045825', '李家岩控制点照片', '2022年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654759129814401026', NULL, '20230111陈尚云存档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748604015575041', '1648881517716045825', '李家岩水库工程施工测量控制--报告文件(修改后11)', '2022年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654759129814401026', NULL, '20230111陈尚云存档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748604074295297', '1648881517716045825', '李库（初）5-0-1李家岩水库总平面布置图', '2022年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654759129814401026', NULL, '20230111陈尚云存档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748604137209857', '1648881517850263553', '金川220kv变电站勘测定界报告 ', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654762690828828673', NULL, '20230306王小刚发吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654748604195930113', '1648881517883817986', '2017年累距图   二滩水库泥沙监测断面（第六次测量）', '2022年', NULL, NULL, 'xls/dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654762691072098305', NULL, '20230308陈洪存档 已存至2019年光盘资料\\2019年光盘资料1-39\\33中', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654767388906487810', '1649945025891270658', '彭州市1：500系列数字测绘产品生产服务项目（第4包）验收意见', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654767388935847937', NULL, '20230214夏夏归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654767389103620097', '1648881417006612482', '测绘地理信息成果质量检验报告-四川省雅砻江二滩电力生产项目设计后续服务数字正射影像图(DOM)', '2022年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654767389216866306', NULL, '测绘局', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654767389288169473', '1648881415815430146', '4XY-JC-5B-YB-013重庆轨道交通4号线西延伸段第三方监控量测（一标段）土建5标月报（2022年9月5日~2022年10月2日) (2)', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654767389355278338', NULL, '20230220夏夏归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1654767389397221378', '1648881415815430146', '4XY-JC-2B-YB-014重庆轨道交通4号线西延伸段第三方监控量测（一标段）土建2标月报（2022年9月5日~2022年10月2日）', '2022年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1654767389355278338', NULL, '20230220夏夏归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132427571789825', '1656130457364594689', '三调成果（白龙镇、店子镇、鹤龄镇、剑门关镇、木马镇、江口镇、樵店镇、羊岭镇、杨村镇）', '2021年', NULL, '2', 'shp', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132427622121474', NULL, '20211209张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132427836030977', '1656130457414926337', '南方银河6 编号SG606311GPS检定证书、全站仪检定证书(2019)', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132427865391105', NULL, '20210928最终资料20211214张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132427898945538', '1656130457414926337', '143永川给水管线补勘补测整改报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132427865391105', NULL, '20210928最终资料20211214张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132427953471489', '1656130457414926337', '地下管线开挖检查表、管线点重复测量检查表4.8、明显管线点重复量测检查表、隐蔽管线点重复探测检查表', '2021年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132427865391105', NULL, '20210928最终资料20211214张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428012191745', '1656130457414926337', '永川供水管线补测质量检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132427865391105', NULL, '20210928最终资料20211214张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428062523394', '1656130457414926337', '永川供水管线地形改套图0920', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132427865391105', NULL, '20210928最终资料20211214张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428112855041', '1656130457414926337', '永川区补勘补测供水管线点线属性表0920', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132427865391105', NULL, '20210928最终资料20211214张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428171575297', '1656130457414926337', '永川区昌龙大道图根点成果表0908', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132427865391105', NULL, '20210928最终资料20211214张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428226101249', '1656130457414926337', '永川区供水补测合同', '2021年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132427865391105', NULL, '20210928最终资料20211214张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428280627201', '1656130457414926337', '永川区供水管线补测技术总结', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132427865391105', NULL, '20210928最终资料20211214张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428406456321', '1656130457414926337', '永川区供水管线补测项目技术设计书', '2021年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132427865391105', NULL, '20210928最终资料20211214张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428460982273', '1656130457414926337', '永川图根观测原始记录0907', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132427865391105', NULL, '20210928最终资料20211214张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428519702529', '1656130457431703554', '土地规划图、土地利用图、土地等别图', '2021年', NULL, '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132428553256961', NULL, '张进归档2021-10-29', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428586811394', '1656130457431703554', '1、49批勘界报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132428553256961', NULL, '张进归档2021-10-29', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428645531649', '1656130457431703554', '2、49批土地分类表10-28（加田坎）', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132428553256961', NULL, '张进归档2021-10-29', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428695863297', '1656130457431703554', '3、49批图斑10-28(加田坎)', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132428553256961', NULL, '张进归档2021-10-29', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428750389250', '1656130457431703554', '4、49批建设项目土地利用现状审查图', '2021年', NULL, NULL, 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132428553256961', NULL, '张进归档2021-10-29', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428800720897', '1656130457431703554', '5、49批集体界址点', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132428553256961', NULL, '张进归档2021-10-29', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428867829762', '1656130457431703554', '6、49批国有界址点', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132428553256961', NULL, '张进归档2021-10-29', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428922355714', '1656130457431703554', '7、49批地块1-3勘界图', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132428553256961', NULL, '张进归档2021-10-29', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132428976881665', '1656130457431703554', '8、49批地块4-11勘界图', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132428553256961', NULL, '张进归档2021-10-29', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429027213313', '1656130457431703554', '9、49批土地勘测定界验收报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132428553256961', NULL, '张进归档2021-10-29', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429081739266', '1656130457448480770', '1.矢量空间数据', '2021年', NULL, NULL, 'shp', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132429106905090', NULL, '20211221李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429144653826', '1656130457448480770', '3.属性表格数据', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132429106905090', NULL, '20211221李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429199179778', '1656130457448480770', '数据库建设文档', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132429106905090', NULL, '20211221李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429249511425', '1656130457448480770', '数据库预检报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132429106905090', NULL, '20211221李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429304037377', '1656130457465257985', '(513333)色达县其他成果', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132429333397505', NULL, '20211221李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429366951938', '1656130457465257985', '(513333)色达县各类土地分类数据', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132429333397505', NULL, '20211221李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429421477889', '1656130457465257985', '(513333)色达县数据库成果', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132429333397505', NULL, '20211221李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429476003841', '1656130457465257985', '(513333)色达县图件成果', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132429333397505', NULL, '20211221李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429534724097', '1656130457465257985', '(513333)色达县文字成果', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132429333397505', NULL, '20211221李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429593444353', '1656130457465257985', '(513333)色达县信息系统成果', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132429333397505', NULL, '20211221李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429647970305', '1656130457482035202', '西昌市农村土地承包经营权确权登记颁证经久乡验收报告', '2021年', NULL, '8', 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132429677330434', NULL, '20211222夏夏归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429710884865', '1656130457482035202', '西昌市农村土地承包经营权确权登记颁证资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132429677330434', NULL, '20221017吴凯归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429761216513', '1648881517615382529', '1.原始收集资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132429790576641', NULL, '20211231李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429853491202', '1648881517615382529', '2.初步成果资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132429790576641', NULL, '20211231李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132429979320322', '1656130457498812417', '德昌县土地确定权发证数据库（第三包）DCDKC.gdb', '2021年', NULL, NULL, 'gdb', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430029651970', NULL, '20211217张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132430071595010', '1656130457519783937', '1.矢量空间数据', '2021年', NULL, NULL, 'shp', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430109343746', NULL, '1210数据库成果20211217李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132430147092481', '1656130457519783937', '3.属性表格数据', '2021年', NULL, NULL, 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430109343746', NULL, '1210数据库成果20211217李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132430218395649', '1656130457519783937', '数据库建设文档', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430109343746', NULL, '1210数据库成果20211217李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132430285504513', '1656130457519783937', '数据库预检报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430109343746', NULL, '1210数据库成果20211217李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132430352613378', '1656130457519783937', '513435甘洛县数据质量检查任务(2021-12-14 14-9-13)', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430109343746', NULL, '1210数据库成果20211217李禺归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132430423916545', '1654408468736245761', '1120提交(zy修改20211128)总库11211(1)(1)', '2021年', NULL, NULL, 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430465859586', NULL, '20211217张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132430553939970', '1654408468736245761', 'chrtk2(1)(1)', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430465859586', NULL, '20211217张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132430700740609', '1656130457540755458', '1-监测报告(1-121期）', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430738489345', NULL, '20211220张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132430772043778', '1656130457540755458', '2-技术方案', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430738489345', NULL, '20211220张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132430826569730', '1656130457431703554', '自贡市2021年第49批次建设用地资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132428553256961', NULL, '20211230朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132430876901378', '1656130457431703554', '自贡市2021年第50批次建设用地资料', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132428553256961', NULL, '20211230朱静归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132430927233025', NULL, '2021C69-西藏自治区雅鲁藏布江ML水库电站规划加深阶段测绘报告202212', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430956593153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132430994341890', '1648881414926237697', '2021C69  西藏自治区雅鲁藏布江ML水库电站规划加深阶段测绘工作-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430956593153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431044673537', NULL, 'ML控制点成果整理（多套坐标系）', '2021年', NULL, NULL, 'xls/xlsx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430956593153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431099199489', NULL, '2021C23C39C69归档-1-无人机项目数据第一部分 原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1656132430956593153', NULL, '20220118郎悟灵归档第一部分 ', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431153725442', NULL, '2021C23C39C69归档-1-无人机项目数据第二部分 成果数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1656132430956593153', NULL, ' 20220414吴振归档第二部分', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431208251394', NULL, '2021C23C39C69归档-2-机载激光雷达数据（新设备）第一部分 原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光', NULL, '1656132430956593153', NULL, '20220118郎悟灵归档第一部分 ', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431262777346', NULL, '2021C23C39C69归档-2-机载激光雷达数据（新设备）第二部分 成果数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光', NULL, '1656132430956593153', NULL, ' 20220414吴振归档第二部分', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431317303297', NULL, '2021C23C39C69归档-3-外业资料-', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430956593153', NULL, '20220406赵洪存档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431371829249', NULL, '西藏自治区ML水库电站规划加深阶段坝址区地形图(含水下202203)1：1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430956593153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431422160897', NULL, '西藏自治区ML水库电站规划加深阶段地形（地类）图（202203）1：2000', '2021年', '3', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430956593153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431476686850', NULL, '西藏自治区ML水库电站规划加深阶段枢纽区DOM(0.2M)-ML2000【新旧影像融合】', '2021年', NULL, '1', 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430956593153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431527018498', NULL, '西藏自治区ML水库电站规划加深阶段移民安置点地形地类图(202203)1：1000', '2021年', '2', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430956593153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431577350145', NULL, '西藏自治区ML水库电站拉林铁路影响评价（1区-12区）地形图1：500', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430956593153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431627681793', NULL, '西藏自治区ML水库电站规划加深阶段坝址区河段三维地形面1：2000', '2021年', '3', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132430956593153', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431678013441', '1648881415395999745', '2021W26-达州绕城高速公路测绘第一部分 原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393534981046273', NULL, '20220118郎悟灵归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431736733698', '1656130457557532674', '管理范围线', '2021年', NULL, NULL, 'shp', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132431770288130', NULL, '20220119张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431803842562', '1656130457557532674', '四川省河湖管理范围划定成果数据1：10000带状数据新测DOM DEM DLG', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132431770288130', NULL, '20220119张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431854174209', '1656130457557532674', '验收鉴定书', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132431770288130', NULL, '20220119张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431904505857', '1656130457557532674', '红原河湖划界图册(1)', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132431770288130', NULL, '20220119张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132431954837505', '1656130457557532674', '红原县48条河桩牌界桩表', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132431770288130', NULL, '20220119张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432009363458', '1656130457557532674', '四川省阿坝州红原县谢尕尔塘等48条河流管理范围划定报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132431770288130', NULL, '20220119张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432059695106', '1656130457557532674', '四川省阿坝州红原县谢尕尔塘等48条河流管理范围划定技术总结', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132431770288130', NULL, '20220119张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432114221058', '1656130457557532674', '四川省阿坝州红原县谢尕尔塘等48条河流管理范围划定检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132431770288130', NULL, '20220119张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432164552705', '1656130457557532674', '四川省阿坝州红原县谢尕尔塘等48条河流管理范围划定实施方案', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132431770288130', NULL, '20220119张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432214884353', '1656130457557532674', '四川省阿坝州红原县谢尕尔塘等48条河流管理范围划定专业技术设计书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132431770288130', NULL, '20220119张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432269410305', '1656130457557532674', '四川省阿坝州红原县谢尕尔塘等48条河流管理范围划定资料移交清单', '2021年', NULL, '8', 'pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132431770288130', NULL, '20220119张进归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432357490689', '1648881414729105410', '老鹰岩一级水电站什月河地形图测绘原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1651393538483290114', NULL, '20220720周强归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432412016642', '1648881414729105410', '2021C76 什月河地形图测绘-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393538483290114', NULL, '20220720周强归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432462348290', '1648881414729105410', '2021C76 什月河地形图测绘-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393538483290114', NULL, '20220720周强归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432512679937', '1648881414729105410', '什月河地形图（202109）500-CGCS2000', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393538483290114', NULL, '20220720周强归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432563011586', '1648881414729105410', '什月河横断面累距成果表', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1651393538483290114', NULL, '20220720周强归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432613343233', '1648881414389366785', '亚龙水电站预可阶段第一部分 原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1656132432642703361', NULL, '20221009杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432672063489', '1648881414389366785', '易贡藏布亚龙水电站预可阶段测绘技术服务项目-测绘报告 ', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '20221009杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432722395138', '1648881414389366785', '易贡藏布亚龙水电站预可阶段测绘技术服务项目-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '20221009杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432772726785', '1648881414389366785', '西藏自治区易贡藏布亚龙水电站预可阶段坝址区1：1000三维地形面', '2021年', '2', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '20221009杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432823058434', '1648881414389366785', '西藏自治区易贡藏布亚龙水电站预可阶段坝址区1：1000正射影像', '2021年', '2', '1', 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '20221009杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432873390082', '1648881414389366785', '西藏自治区易贡藏布亚龙水电站预可阶段坝址区地形地类图（含水下202112)1：1000', '2021年', '2', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '20221009杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132432961470465', '1648881414389366785', '西藏自治区易贡藏布亚龙水电站预可阶段厂址区1：1000三维地形面', '2021年', '2', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '20221009杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433020190721', '1648881414389366785', '西藏自治区易贡藏布亚龙水电站预可阶段厂址区1：1000正射影像', '2021年', '2', '1', 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '20221009杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433070522370', '1648881414389366785', '西藏自治区易贡藏布亚龙水电站预可阶段厂址区地形地类图(含水下202112)1：1000', '2021年', '2', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '20221009杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433125048322', '1648881414389366785', '西藏自治区易贡藏布亚龙水电站预可阶段工程区1：5000三维地形面', '2021年', '4', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '20221009杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433213128706', '1648881414389366785', '西藏自治区易贡藏布亚龙水电站预可阶段工程区1：5000正射影像', '2021年', '4', '1', 'tfw', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '20221009杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433271848961', '1648881414389366785', '西藏自治区易贡藏布亚龙水电站预可阶段工程区地形地类图(202111)1：5000', '2021年', '4', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '20221009杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433322180610', '1648881414389366785', '西北院正式图5000', '2021年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '20221009杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433376706561', '1648881414389366785', '西北院正式图1000', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '20221009杨为康归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433460592641', '1648881414389366785', '202304西藏自治区易贡藏布亚龙水电站预可阶段坝址区地形地类图（含水下202112)1：1000', '2023年', '2', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '2023年04月修改后', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433519312898', '1648881414389366785', '202304西藏自治区易贡藏布亚龙水电站预可阶段厂址区地形地类图(含水下202112)1：1000', '2023年', '2', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '2023年04月修改后', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433573838849', '1648881414389366785', '202304西藏自治区易贡藏布亚龙水电站预可阶段工程区地形地类图(202111)1：5000', '2023年', '4', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132432642703361', NULL, '2023年04月修改后', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433628364801', '1648881414695550978', '7-83-2021C78-波罗水电站（白玉县）农村集中安置点、集镇和污水处理厂迁复建初拟选址测绘工作', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132433657724929', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433691279362', '1648881414695550978', '波罗水电站（白玉县）农村集中安置点、集镇和污水处理厂迁复建初拟选址测绘工作（正式图）-21处', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132433657724929', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433745805313', '1648881414695550978', '罗水电站（白玉县）农村集中安置点、集镇和污水处理厂迁复建初拟选址测绘工作-测绘报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132433657724929', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433800331266', '1648881414695550978', '波罗水电站（白玉县）农村集中安置点、集镇和污水处理厂迁复建初拟选址测绘工作-管理记录资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132433657724929', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433859051522', '1648881414695550978', '2021C78波罗水电站（白玉县）农村集中安置点、集镇和污水处理厂迁复建初拟选址测绘工作-过程数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132433657724929', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433913577474', '1648881414695550978', '2021C78波罗水电站（白玉县）农村集中安置点、集镇和污水处理厂迁复建初拟选址测绘工作-机载激光雷达归档数据-第一部分 原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光', NULL, '1656132433657724929', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132433968103426', '1648881414695550978', '2021C78波罗水电站（白玉县）农村集中安置点、集镇和污水处理厂迁复建初拟选址测绘工作-机载激光雷达归档数据-第二部分 成果数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光', NULL, '1656132433657724929', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434022629377', '1648881414695550978', '波罗水电站（白玉县）农村集中安置点、集镇和污水处理厂迁复建初拟选址测绘工作-无人机归档数据-第一部分 原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1656132433657724929', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434077155330', '1648881414695550978', '波罗水电站（白玉县）农村集中安置点、集镇和污水处理厂迁复建初拟选址测绘工作-无人机归档数据-第二部分 成果数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1656132433657724929', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434135875585', '1648881416146780162', '2021W16-云南省南涧至云县高速公路地形图（202104)1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434169430018', NULL, '吴振归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434207178753', '1648881416146780162', '航飞数字相片', '2021年', NULL, NULL, 'jpg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434169430018', NULL, '吴振归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434265899010', '1648881416146780162', 'POS', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434169430018', NULL, '吴振归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434324619265', '1648881416146780162', '航摄分区情况说明', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434169430018', NULL, '吴振归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434391728129', '1648881416146780162', 'GNSS 水准原始观测数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434169430018', NULL, '吴振归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434450448386', '1648881416146780162', '1 专业技术设计书', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434169430018', NULL, '吴振归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434513362946', '1648881416146780162', '2 四等GNSS点之记', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434169430018', NULL, '吴振归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434567888898', '1648881416146780162', '3 仪器检定资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434169430018', NULL, '吴振归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434626609153', '1648881416146780162', '4  计算资料', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434169430018', NULL, '吴振归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434681135106', '1648881416146780162', '5  南涧至云县高速公路控制地形测绘（无量山镇～忙怀乡段）资料质量检查报告', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434169430018', NULL, '吴振归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434735661058', '1648881416146780162', '6 技术总结', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434169430018', NULL, '吴振归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434790187009', '1648881416146780162', '7 水准测量记录', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434169430018', NULL, '吴振归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434848907265', '1648881416146780162', '8 四等、一级GNSS控制成果', '2021年', NULL, '8', 'doc/docx', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434169430018', NULL, '吴振归档', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434907627522', '1648881414812991489', '2021C72江油抽水蓄能电站预可阶段测绘-无人机项目数据第一部分 原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1656132434936987649', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132434970542081', '1648881414812991489', '2021C72江油抽水蓄能电站预可阶段测绘-无人机项目数据第二部分 成果数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1656132434936987649', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132435029262338', '1648881414812991489', '2021C72江油抽水蓄能电站预可阶段测绘-机载激光雷达归档数据第一部分 原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光', NULL, '1656132434936987649', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132435083788289', '1648881414812991489', '2021C72江油抽水蓄能电站预可阶段测绘-机载激光雷达归档数据第二部分 成果数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '机载激光', NULL, '1656132434936987649', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132435142508545', '1648881414812991489', '四川省江油县抽水蓄能电站（负荷侧）预可研阶段初次选址测绘报告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434936987649', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132435209617410', '1648881414812991489', '2021C72-江油抽水蓄能电站预可阶段-管理记录资料', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434936987649', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132435343835137', '1648881414812991489', '四川省江油县抽水蓄能电站（负荷侧）预可研阶段初次选址工程区地形图1：5000', '2021年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434936987649', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132435423526914', '1648881414812991489', '四川省江油县抽水蓄能电站（负荷侧）预可研阶段初次选址地形图1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434936987649', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132435490635778', '1648881414812991489', '四川省江油县抽水蓄能电站（负荷侧）预可研阶段初次选址工程区三维地形面1：5000', '2021年', '4', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434936987649', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132435540967425', '1648881414812991489', '四川省江油县抽水蓄能电站（负荷侧）预可研阶段初次选址三维地形面1：2000', '2021年', '3', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132434936987649', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132435599687681', '1648881414976569346', '四川省绵竹县抽水蓄能电站（负荷侧）预可研阶段测绘报告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132435691962370', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132435738099714', '1648881414976569346', '绵竹市抽水蓄能电站预可阶段测绘-管理记录资料', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132435691962370', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132435817791490', '1648881414976569346', '四川省绵竹县抽水蓄能电站（负荷侧）预可研阶段工程区地形图1：5000', '2021年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132435691962370', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132435889094658', '1648881414976569346', '四川省绵竹县抽水蓄能电站（负荷侧）预可研阶段上下水库及输水发电系统地形地类图1：2000', '2021年', '3', '5', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132435691962370', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132435968786434', '1648881414976569346', '四川省绵竹县抽水蓄能电站（负荷侧）预可研阶段工程区三维地形面1：5000', '2021年', '4', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132435691962370', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132436040089601', '1648881414976569346', '四川省绵竹县抽水蓄能电站（负荷侧）预可研阶段上下水库及输水发电系统三维地形面1：2000', '2021年', '3', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1656132435691962370', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1656132436119781378', '1648881414976569346', '绵竹市抽水蓄能电站预可阶段测绘第一部分-原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1656132435691962370', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266585939869697', '1648881415047872514', '2021C65-四川省道孚县道孚抽水蓄能电站预可阶段地形图、DOM、三维地形面制作项目-测绘报告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '激光及无人机', NULL, '1661266585969229826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266586069893121', '1648881415047872514', '2021C65-四川省道孚县道孚抽水蓄能电站预可阶段地形图、DOM、三维地形面制作项目-管理记录资料', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '激光及无人机', NULL, '1661266585969229826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266586128613377', '1648881415047872514', '2022激光及无人机数据归档 第一部分—原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '激光及无人机', NULL, '1661266585969229826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266586178945025', '1648881415047872514', '四川省道孚县抽水蓄能电站预可阶段补充测绘地形图（202108）1：5000', '2021年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '激光及无人机', NULL, '1661266585969229826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266586233470977', '1648881415047872514', '四川省道孚县抽水蓄能电站预可阶段补充测绘三维地形面1：5000', '2021年', '4', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, '激光及无人机', NULL, '1661266585969229826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266586287996930', '1648881415047872514', '四川省道孚县抽水蓄能电站预可阶段工程区地形图（202108）1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '激光及无人机', NULL, '1661266585969229826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266586338328578', '1648881415047872514', '四川省道孚县抽水蓄能电站预可阶段工程区三维地形面1：2000', '2021年', '3', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, '激光及无人机', NULL, '1661266585969229826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266586397048833', '1648881415047872514', '四川省道孚县抽水蓄能电站预可阶段施工区地形图（202108）1：5000', '2021年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '激光及无人机', NULL, '1661266585969229826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266586539655170', '1648881415047872514', '四川省道孚县抽水蓄能电站预可阶段施工区三维地形面：5000', '2021年', '4', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, '激光及无人机', NULL, '1661266585969229826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266586623541249', '1648881415047872514', '四川省道孚县抽水蓄能电站预可阶段新增地形图(202109)1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '激光及无人机', NULL, '1661266585969229826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266586694844418', '1648881415047872514', '成果DOM', '2021年', NULL, '1', NULL, NULL, NULL, NULL, NULL, NULL, NULL, '激光及无人机', NULL, '1661266585969229826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266586761953281', '1648881415047872514', '2022激光及无人机数据归档 第二部分-成果文件', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '激光及无人机', NULL, '1661266585969229826', NULL, NULL, NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266586824867842', '1648881415375028225', '第一部分—原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266586862616578', NULL, '20230306王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266586900365314', '1648881415375028225', '第二部分-成果文件', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266586862616578', NULL, '20230306王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266586963279873', '1648881415375028225', '雅砻江上游色戈光储项目1：2000地形图', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266586862616578', NULL, '20230306王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266587030388738', '1648881415375028225', '2021C57 - 雅砻江色戈光伏发电项目地形图测绘技术服务-测绘报告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266586862616578', NULL, '20230306王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266587093303297', '1648881415375028225', '2021C57 - 雅砻江色戈光伏发电项目地形图测绘技术服务-管理记录资料', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266586862616578', NULL, '20230306王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266587160412162', '1648881414565527553', '四川省屏山县抽水蓄能电站（负荷侧）预可研阶段地形图测绘报告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266587198160897', NULL, '20230406王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266587235909634', '1648881414565527553', '四川省屏山县抽水蓄能电站（负荷侧）预可研阶段地形图管理记录资料', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266587198160897', NULL, '20230406王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266587298824194', '1648881414565527553', '四川省屏山县抽水蓄能电站（负荷侧）预可研阶段地形图1：5000', '2021年', '4', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266587198160897', NULL, '20230406王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266587365933057', '1648881414565527553', '四川省屏山县抽水蓄能电站（负荷侧）预可研阶段地形图1：2000', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266587198160897', NULL, '20230406王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266587424653314', '1648881414565527553', '四川省屏山县抽水蓄能电站（负荷侧）预可研阶段三维地形面1：5000', '2021年', '4', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266587198160897', NULL, '20230406王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266587491762178', '1648881414565527553', '四川省屏山县抽水蓄能电站（负荷侧）预可研阶段三维地形面1：2000', '2021年', '3', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266587198160897', NULL, '20230406王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266587554676737', '1648881414565527553', '第一部分—原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266587198160897', NULL, '20230406王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266587617591298', '1648881414565527553', '第二部分-成果文件', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266587198160897', NULL, '20230406王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266587684700162', '1648881414372589569', '第一部分—原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266587722448897', NULL, '20230410王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266587764391938', '1648881414372589569', '第二部分-成果文件', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266587722448897', NULL, '20230410王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266587831500801', '1648881414372589569', '四川省大渡河瀑布沟水电站下游1：500地形图(含水下2022020）', '2021年', '1', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266587722448897', NULL, '20230410王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266587898609666', '1648881414372589569', '2021C91 瀑布沟水电站下游河道1：500地形图测量项目 测绘报告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266587722448897', NULL, '20230410王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266587978301441', '1648881414372589569', '2021C91 瀑布沟水电站下游河道1：500地形图测量项目-管理记录资料', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266587722448897', NULL, '20230410王晶丽归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266588057993217', '1648881415832207361', '第一部分-原始数据', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266588091547650', NULL, '20220321谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266588125102082', '1648881415832207361', '曲松光伏二号场址1：2000地形图', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266588091547650', NULL, '20220321谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266588188016642', '1648881415832207361', '曲松光伏二号场址1：2000地形图', '2021年', '3', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266588091547650', NULL, '20220321谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266588250931202', '1648881415832207361', '2021W17 - 曲松光伏一号场址地形图测绘项目 - 管理记录资料', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266588091547650', NULL, '20220321谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266588309651457', '1648881415832207361', '2021W17 - 曲松光伏一号场址地形图测绘项目- 测绘报告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266588091547650', NULL, '20220321谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266588368371713', '1648881415832207361', '第二部分-成果文件', '2021年', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '无人机航飞', NULL, '1661266588091547650', NULL, '20220321谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266588435480578', '1648881415333085186', '第一部分-原始数据  波罗坝区上围堰上游100m到尾水出口下游100m之间河段1：1000水下地形图', '2021年', '2', '2', 'dwg', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1661266588536143874', NULL, '20220321谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266588582281217', '1648881415333085186', '波罗坝址区三维地形面', '2021年', '2', '4', 'stl/dxf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1661266588536143874', NULL, '20220321谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266588661972994', '1648881415333085186', '波罗坝址区三维地形面制作测绘报告', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1661266588536143874', NULL, '20220321谭君归档全部资料', NULL, NULL);
INSERT INTO `files_achievement` VALUES ('1661266588737470466', '1648881415333085186', '波罗坝址区三维地形面制作管理记录资料', '2021年', NULL, '8', 'doc/pdf', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, '1661266588536143874', NULL, '20220321谭君归档全部资料', NULL, NULL);

-- ----------------------------
-- 66、files存储地址表
-- ----------------------------
DROP TABLE IF EXISTS `files_storage`;
CREATE TABLE `files_storage`  (
  `id` char(19) NOT NULL COMMENT '存放地址id',
  `storage_address` varchar(255) DEFAULT NULL COMMENT '存放地址',
  `administrator` bigint DEFAULT NULL COMMENT '管理人',
  `remark` varchar(255) DEFAULT NULL COMMENT '备注',
  PRIMARY KEY (`id`) USING BTREE
) ENGINE = InnoDB comment='files存储地址表';

-- ----------------------------
-- 初始化-存储地址表数据
-- ----------------------------
INSERT INTO `files_storage` VALUES ('1598559186729041922', '光盘', 58, '');
INSERT INTO `files_storage` VALUES ('1620991383851237378', '存储器', 58, '');
INSERT INTO `files_storage` VALUES ('1621027093186609153', '存储器-光盘资料-8-17', NULL, NULL);
INSERT INTO `files_storage` VALUES ('1621028224637861889', '2022年光盘资料202201-18', NULL, NULL);
INSERT INTO `files_storage` VALUES ('1621042103266836481', '2022年光盘资料202202-', 58, '');
INSERT INTO `files_storage` VALUES ('1621043260613722113', 'd:\\2022年提交资料', NULL, NULL);
INSERT INTO `files_storage` VALUES ('1622855667887636482', '2022年光盘资料\\2022年光盘资料一（1-29）\\202201-7', 58, '');
INSERT INTO `files_storage` VALUES ('1622855667984105474', '存储器\\光盘资料\\八\\8-10-2022W02-黄河干流若尔盖段应急处置（抢险救灾）工程无人机数据', 58, '');
INSERT INTO `files_storage` VALUES ('1622860864538017793', '2022年光盘资料\\2022年光盘资料二（30-58）\\202202-36', 58, '');
INSERT INTO `files_storage` VALUES ('1622860864798064641', '存储器\\光盘资料\\八\\8-6', 58, '');
INSERT INTO `files_storage` VALUES ('1623559120658104322', '2022年光盘资料\\2022年光盘资料一（1-29）\\202201-6', 58, '');
INSERT INTO `files_storage` VALUES ('1623559120976871426', '2022年光盘资料\\2022年光盘资料二（30-58）\\202202-40', 58, '');
INSERT INTO `files_storage` VALUES ('1623559121106894850', '存储器\\光盘资料\\八\\8-18', 58, '');
INSERT INTO `files_storage` VALUES ('1623559121207558145', 'D\\2022提交资料', 58, '');
INSERT INTO `files_storage` VALUES ('1623559121257889794', '2022年光盘资料\\2022年光盘资料二（30-58）\\202202-41', 58, '');
INSERT INTO `files_storage` VALUES ('1623559121694097410', '存储器\\光盘资料\\八\\8-19', 58, '');
INSERT INTO `files_storage` VALUES ('1623559121786372097', 'F:\\2022年光盘资料\\2022年光盘资料一（1-29）\\202201-13', 58, '');
INSERT INTO `files_storage` VALUES ('1623559122084167682', '存储器\\光盘资料\\八\\8-15', 58, '');
INSERT INTO `files_storage` VALUES ('1623559462238027778', '2022年光盘资料\\2022年光盘资料一（1-29）\\202201-13', 58, '');
INSERT INTO `files_storage` VALUES ('1625696755254034434', '2022年光盘资料\\2022年光盘资料一（1-29）\\202201-22', 58, '');
INSERT INTO `files_storage` VALUES ('1625696755614744578', '存储器\\光盘资料\\八\\8-21', 58, '');
INSERT INTO `files_storage` VALUES ('1625696755694436354', '2022年光盘资料\\2022年光盘资料二（30-58）\\202202-42', 58, '');
INSERT INTO `files_storage` VALUES ('1625696755774128129', '存储器\\光盘资料\\八\\8-44', 58, '');
INSERT INTO `files_storage` VALUES ('1648948467972440066', '2022年光盘资料一202201-6', 58, '');
INSERT INTO `files_storage` VALUES ('1648948468475756545', '2022年光盘资料二202202-40', 58, '');
INSERT INTO `files_storage` VALUES ('1648948468735803394', '存储器\\光盘资料\\2022年项目八\\8-18', 58, '');
INSERT INTO `files_storage` VALUES ('1648948469130067969', '2022年光盘资料二202202-41', 58, '');
INSERT INTO `files_storage` VALUES ('1648948470107340802', '存储器\\光盘资料\\2022年项目八\\8-19', 58, '');
INSERT INTO `files_storage` VALUES ('1648948470296084481', '2022年光盘资料一202201-13', 58, '');
INSERT INTO `files_storage` VALUES ('1648948470925230081', '存储器\\光盘资料\\2022年项目八\\8-15', 58, '');
INSERT INTO `files_storage` VALUES ('1648948471017504769', '2022年光盘资料一202201-22', 58, '');
INSERT INTO `files_storage` VALUES ('1648948471856365569', '存储器\\光盘资料\\2022年项目八\\8-21', 58, '');
INSERT INTO `files_storage` VALUES ('1648948472120606722', '2022年光盘资料二202202-42', 58, '');
INSERT INTO `files_storage` VALUES ('1648948472342904834', '存储器\\光盘资料\\2022年项目八\\8-44', 58, '');
INSERT INTO `files_storage` VALUES ('1648948473227902977', '2022年光盘资料一2202201-18', 58, '');
INSERT INTO `files_storage` VALUES ('1648948473332760577', '存储器\\光盘资料\\2022年项目八\\8-17', 58, '');
INSERT INTO `files_storage` VALUES ('1648948473844465666', '2022年光盘资料一2202201-1', 58, '');
INSERT INTO `files_storage` VALUES ('1648948474108706818', '2022年光盘资料一2202201-2', 58, '');
INSERT INTO `files_storage` VALUES ('1648948474205175809', '2022年光盘资料一2202201-3', 58, '');
INSERT INTO `files_storage` VALUES ('1648948474385530881', '2022年光盘资料一202201-4', 58, '');
INSERT INTO `files_storage` VALUES ('1648948474804961282', '2022年光盘资料一202201-5', 58, '');
INSERT INTO `files_storage` VALUES ('1648948475060813826', '2022年光盘资料一202201-8', 58, '');
INSERT INTO `files_storage` VALUES ('1648948475480244226', '2022年光盘资料一202201-9', 58, '');
INSERT INTO `files_storage` VALUES ('1648948475572518914', '存储器\\光盘资料\\2021年项目七\\7-77', 58, '');
INSERT INTO `files_storage` VALUES ('1648948476155527169', '2022年光盘资料一202201-10', 58, '');
INSERT INTO `files_storage` VALUES ('1648948476512043009', '2022年光盘资料一202201-11', 58, '');
INSERT INTO `files_storage` VALUES ('1648948477241851905', '2022年光盘资料一202201-12', 58, '');
INSERT INTO `files_storage` VALUES ('1648948477413818369', '存储器\\光盘资料\\2022年项目八\\8-8', 58, '');
INSERT INTO `files_storage` VALUES ('1648948477506093058', '2022年光盘资料一202201-14', 58, '');
INSERT INTO `files_storage` VALUES ('1648948477929717761', '2022年光盘资料一202201-15', 58, '');
INSERT INTO `files_storage` VALUES ('1648948478101684225', '2022年光盘资料一202201-16', 58, '');
INSERT INTO `files_storage` VALUES ('1648948478193958914', '2022年光盘资料一202201-17', 58, '');
INSERT INTO `files_storage` VALUES ('1648948478286233601', '2022年光盘资料一202201-19', 58, '');
INSERT INTO `files_storage` VALUES ('1648948478831493121', '2022年光盘资料一202201-20', 58, '');
INSERT INTO `files_storage` VALUES ('1648948478978293762', '2022年光盘资料一202201-21', 58, '');
INSERT INTO `files_storage` VALUES ('1648948479313838082', '2022年光盘资料一202201-23', 58, '');
INSERT INTO `files_storage` VALUES ('1648948479607439361', '2022年光盘资料一202201-24', 58, '');
INSERT INTO `files_storage` VALUES ('1648948479775211522', '2022年光盘资料一202201-25', 58, '');
INSERT INTO `files_storage` VALUES ('1648948479867486209', '2022年光盘资料一202201-26', 58, '');
INSERT INTO `files_storage` VALUES ('1648948480119144450', '2022年光盘资料一202201-27', 58, '');
INSERT INTO `files_storage` VALUES ('1648948481058668546', '2022年光盘资料一202201-28', 58, '');
INSERT INTO `files_storage` VALUES ('1648948481230635010', '2022年光盘资料一202201-29', 58, '');
INSERT INTO `files_storage` VALUES ('1648948481570373634', '2022年光盘资料二202202-30', 58, '');
INSERT INTO `files_storage` VALUES ('1648948481813643265', '2022年光盘资料二202202-31', 58, '');
INSERT INTO `files_storage` VALUES ('1649317769934274562', '2022年光盘资料二202202-32', 58, '');
INSERT INTO `files_storage` VALUES ('1649317770106241025', '存储器\\光盘资料\\2022年项目八\\8-33', 58, '');
INSERT INTO `files_storage` VALUES ('1649317770978656257', '2022年光盘资料二202202-33', 58, '');
INSERT INTO `files_storage` VALUES ('1649317771351949313', '存储器\\光盘资料\\2022年项目八\\8-22', 58, '');
INSERT INTO `files_storage` VALUES ('1649317771519721474', '2022年光盘资料二202202-34', 58, '');
INSERT INTO `files_storage` VALUES ('1649317771934957569', '2022年光盘资料二202202-35', 58, '');
INSERT INTO `files_storage` VALUES ('1649317772182421506', '存储器\\光盘资料\\2022年项目八\\8-27', 58, '');
INSERT INTO `files_storage` VALUES ('1649317772274696194', '2022年光盘资料二202202-37', 58, '');
INSERT INTO `files_storage` VALUES ('1649317772836732930', '存储器\\光盘资料\\2022年项目八\\8-20', 58, '');
INSERT INTO `files_storage` VALUES ('1649317773004505090', '2022年光盘资料二202202-38', 58, '');
INSERT INTO `files_storage` VALUES ('1649317773449101314', '2022年光盘资料二202202-39', 58, '');
INSERT INTO `files_storage` VALUES ('1649317773616873474', '2021年光盘资料四202104-77', 58, '');
INSERT INTO `files_storage` VALUES ('1649317773944029185', '存储器\\光盘资料\\2021年项目七\\7-86', 58, '');
INSERT INTO `files_storage` VALUES ('1649317774115995650', '2022年光盘资料二202202-43', 58, '');
INSERT INTO `files_storage` VALUES ('1649317774527037442', '存储器\\光盘资料\\2022年项目八\\8-45', 58, '');
INSERT INTO `files_storage` VALUES ('1649317774699003905', '2022年光盘资料二202202-44', 58, '');
INSERT INTO `files_storage` VALUES ('1649317775118434306', '存储器\\光盘资料\\2022年项目八\\8-46', 58, '');
INSERT INTO `files_storage` VALUES ('1649317775206514689', '2022年光盘资料二202202-45', 58, '');
INSERT INTO `files_storage` VALUES ('1649317775466561537', '2022年光盘资料二202202-46', 58, '');
INSERT INTO `files_storage` VALUES ('1649317775722414082', '2022年光盘资料二202202-47', 58, '');
INSERT INTO `files_storage` VALUES ('1649317775894380545', '存储器\\光盘资料\\2022年项目八\\8-38', 58, '');
INSERT INTO `files_storage` VALUES ('1649317776552886274', '2022年光盘资料二202202-48', 58, '');
INSERT INTO `files_storage` VALUES ('1649317776724852737', '2022年光盘资料二202202-49', 58, '');
INSERT INTO `files_storage` VALUES ('1649317777072979969', '2022年光盘资料二202202-50', 58, '');
INSERT INTO `files_storage` VALUES ('1649317777244946434', '2022年光盘资料二202202-51', 58, '');
INSERT INTO `files_storage` VALUES ('1649317777999921153', '2022年光盘资料二202202-52', 58, '');
INSERT INTO `files_storage` VALUES ('1649317778088001537', '2022年光盘资料二202202-53', 58, '');
INSERT INTO `files_storage` VALUES ('1649317778343854082', '2022年光盘资料二202202-54', 58, '');
INSERT INTO `files_storage` VALUES ('1649317778427740161', '2022年光盘资料二202202-55', 58, '');
INSERT INTO `files_storage` VALUES ('1649317778515820546', '2022年光盘资料二202202-56', 58, '');
INSERT INTO `files_storage` VALUES ('1649317778717147138', '2022年光盘资料二202202-57', 58, '');
INSERT INTO `files_storage` VALUES ('1649317778817810433', '2022年光盘资料二202202-58', 58, '');
INSERT INTO `files_storage` VALUES ('1649317778910085121', '2022年光盘资料二202202-59', 58, '');
INSERT INTO `files_storage` VALUES ('1649317779249823745', '2022年光盘资料二202202-60', 58, '');
INSERT INTO `files_storage` VALUES ('1649317779526647809', '2022年光盘资料二202202-61', 58, '');
INSERT INTO `files_storage` VALUES ('1649317779866386434', '2022年光盘资料二202202-62', 58, '');
INSERT INTO `files_storage` VALUES ('1649317779954466818', '2022年光盘资料二202202-63', 58, '');
INSERT INTO `files_storage` VALUES ('1649317780042547202', '2022年光盘资料二202202-64', 58, '');
INSERT INTO `files_storage` VALUES ('1649317780579418114', '2022年光盘资料二202202-65', 58, '');
INSERT INTO `files_storage` VALUES ('1649317780680081410', '2022年光盘资料二202202-66', 58, '');
INSERT INTO `files_storage` VALUES ('1649317780772356098', '2022年光盘资料二202202-67', 58, '');
INSERT INTO `files_storage` VALUES ('1649317781443444737', '2022年光盘资料二202202-68', 58, '');
INSERT INTO `files_storage` VALUES ('1649317782030647298', '2022年光盘资料二202202-69', 58, '');
INSERT INTO `files_storage` VALUES ('1649317782177447938', '2022年光盘资料二202202-70', 58, '');
INSERT INTO `files_storage` VALUES ('1649317782269722626', '2022年光盘资料二202202-71', 58, '');
INSERT INTO `files_storage` VALUES ('1649317782357803009', '2022年光盘资料二202202-72', 58, '');
INSERT INTO `files_storage` VALUES ('1649317783809032194', '2022年光盘资料二202202-73', 58, '');
INSERT INTO `files_storage` VALUES ('1649317783901306882', '2022年光盘资料二202202-74', 58, '');
INSERT INTO `files_storage` VALUES ('1649317784698224642', '2022年光盘资料二202202-75', 58, '');
INSERT INTO `files_storage` VALUES ('1649317784865996802', '2022年光盘资料二202202-', 58, '');
INSERT INTO `files_storage` VALUES ('1649317785109266434', '2022年光盘资料二202202-36', 58, '');
INSERT INTO `files_storage` VALUES ('1649317785272844289', '存储器\\光盘资料\\八\\8-10', 58, '');
INSERT INTO `files_storage` VALUES ('1649317785365118977', '2022年光盘资料一202201-7', 58, '');
INSERT INTO `files_storage` VALUES ('1649317785620971521', '存储器\\光盘资料\\八\\8-63', 58, '');
INSERT INTO `files_storage` VALUES ('1649317785792937985', '存储器\\光盘资料\\八\\8-60', 58, '');
INSERT INTO `files_storage` VALUES ('1649944624248913921', '存储器\\光盘资料\\八\\8-1', 58, '');
INSERT INTO `files_storage` VALUES ('1649944624336994306', '存储器\\光盘资料\\八\\8-2', 58, '');
INSERT INTO `files_storage` VALUES ('1649944624416686082', '存储器\\光盘资料\\八\\8-3', 58, '');
INSERT INTO `files_storage` VALUES ('1649944624618012674', '存储器\\光盘资料\\八\\8-4', 58, '');
INSERT INTO `files_storage` VALUES ('1649944624697704450', '存储器\\光盘资料\\八\\8-5', 58, '');
INSERT INTO `files_storage` VALUES ('1649944624995500033', '存储器\\光盘资料\\八\\8-7', 58, '');
INSERT INTO `files_storage` VALUES ('1649944625142300674', '存储器\\光盘资料\\八\\8-9', 58, '');
INSERT INTO `files_storage` VALUES ('1649944625226186754', '存储器\\光盘资料\\八\\8-12', 58, '');
INSERT INTO `files_storage` VALUES ('1649944625427513345', '存储器\\光盘资料\\八\\8-13', 58, '');
INSERT INTO `files_storage` VALUES ('1649944625503010818', '存储器\\光盘资料\\八\\8-26', 58, '');
INSERT INTO `files_storage` VALUES ('1649944625586896897', '存储器\\光盘资料\\八\\8-28', 58, '');
INSERT INTO `files_storage` VALUES ('1649944625683365890', '存储器\\光盘资料\\八\\8-29', 58, '');
INSERT INTO `files_storage` VALUES ('1649944625834360833', '存储器\\光盘资料\\八\\8-30', 58, '');
INSERT INTO `files_storage` VALUES ('1649944626039881729', '存储器\\光盘资料\\八\\8-31', 58, '');
INSERT INTO `files_storage` VALUES ('1649944626526420994', '存储器\\光盘资料\\八\\8-32', 58, '');
INSERT INTO `files_storage` VALUES ('1649944627843432450', '存储器\\光盘资料\\八\\8-34', 58, '');
INSERT INTO `files_storage` VALUES ('1649944628183171073', '存储器\\光盘资料\\八\\8-35', 58, '');
INSERT INTO `files_storage` VALUES ('1649944628728430594', '存储器\\光盘资料\\八\\8-37', 58, '');
INSERT INTO `files_storage` VALUES ('1649944628875231233', '存储器\\光盘资料\\八\\8-40', 58, '');
INSERT INTO `files_storage` VALUES ('1649944629693120514', '存储器\\光盘资料\\八\\8-61', 58, '');
INSERT INTO `files_storage` VALUES ('1650403349090795522', '存储器\\光盘资料\\八\\8-16', 58, '');
INSERT INTO `files_storage` VALUES ('1650403349233401857', '存储器\\光盘资料\\八\\8-24', 58, '');
INSERT INTO `files_storage` VALUES ('1650403349401174018', '存储器\\光盘资料\\八\\8-41', 58, '');
INSERT INTO `files_storage` VALUES ('1650403351007592450', '存储器\\光盘资料\\八\\8-43', 58, '');
INSERT INTO `files_storage` VALUES ('1650403351116644354', '存储器\\光盘资料\\八\\8-47', 58, '');
INSERT INTO `files_storage` VALUES ('1650403351221501954', '存储器\\光盘资料\\八\\8-48', 58, '');
INSERT INTO `files_storage` VALUES ('1650403352836308994', '存储器\\光盘资料\\八\\8-49', 58, '');
INSERT INTO `files_storage` VALUES ('1650403353650003969', '存储器\\光盘资料\\八\\8-50', 58, '');
INSERT INTO `files_storage` VALUES ('1650403355717795842', '存储器\\光盘资料\\八\\8-51', 58, '');
INSERT INTO `files_storage` VALUES ('1650403356481159169', '存储器\\光盘资料\\八\\8-52', 58, '');
INSERT INTO `files_storage` VALUES ('1650403357110304770', '存储器\\光盘资料\\八\\8-53', 58, '');
INSERT INTO `files_storage` VALUES ('1650403357961748481', '存储器\\光盘资料\\八\\8-54', 58, '');
INSERT INTO `files_storage` VALUES ('1650403358527979522', '存储器\\光盘资料\\八\\8-55', 58, '');
INSERT INTO `files_storage` VALUES ('1650403359350063106', '存储器\\光盘资料\\八\\8-56', 58, '');
INSERT INTO `files_storage` VALUES ('1650403360226672642', '存储器\\光盘资料\\八\\8-57', 58, '');
INSERT INTO `files_storage` VALUES ('1650403360771932161', '存储器\\光盘资料\\八\\8-58', 58, '');
INSERT INTO `files_storage` VALUES ('1650403361669513217', '存储器\\光盘资料\\八\\8-59', 58, '');
INSERT INTO `files_storage` VALUES ('1650403362525151234', '存储器\\光盘资料\\八\\8-64', 58, '');
INSERT INTO `files_storage` VALUES ('1650403363435315201', '存储器\\光盘资料\\八\\8-66', 58, '');
INSERT INTO `files_storage` VALUES ('1650403365066899457', '存储器\\光盘资料\\八\\8-67', 58, '');
INSERT INTO `files_storage` VALUES ('1650403366077726721', '存储器\\光盘资料\\八\\8-68', 58, '');
INSERT INTO `files_storage` VALUES ('1650403367138885634', '存储器\\光盘资料\\八\\8-69', 58, '');
INSERT INTO `files_storage` VALUES ('1650403367931609090', '存储器\\光盘资料\\八\\8-72', 58, '');
INSERT INTO `files_storage` VALUES ('1650403368623669250', '存储器\\光盘资料\\八\\8-71', 58, '');
INSERT INTO `files_storage` VALUES ('1650403369714188290', '存储器\\光盘资料\\八\\8-70', 58, '');
INSERT INTO `files_storage` VALUES ('1650768862312660993', '2021年光盘资料一202101-1', 58, '');
INSERT INTO `files_storage` VALUES ('1650768862467850242', '2021年光盘资料一202101-2', 58, '');
INSERT INTO `files_storage` VALUES ('1650768862581096450', '2021年光盘资料一202101-3', 58, '');
INSERT INTO `files_storage` VALUES ('1650768862983749634', '2021年光盘资料一202101-4', 58, '');
INSERT INTO `files_storage` VALUES ('1650768863382208513', '2021年光盘资料一202101-5', 58, '');
INSERT INTO `files_storage` VALUES ('1650768863889719297', '2021年光盘资料一202101-6', 58, '');
INSERT INTO `files_storage` VALUES ('1650768864086851586', '2021年光盘资料一202101-7', 58, '');
INSERT INTO `files_storage` VALUES ('1650768864380452865', '2021年光盘资料一202101-8', 58, '');
INSERT INTO `files_storage` VALUES ('1650768864669859841', '2021年光盘资料一202101-9', 58, '');
INSERT INTO `files_storage` VALUES ('1650768864871186433', '2021年光盘资料一202101-10', 58, '');
INSERT INTO `files_storage` VALUES ('1650768864971849730', '2021年光盘资料一202101-11', 58, '');
INSERT INTO `files_storage` VALUES ('1650768865257062401', '2021年光盘资料一202101-12', 58, '');
INSERT INTO `files_storage` VALUES ('1650768865781350402', '2021年光盘资料一202101-13', 58, '');
INSERT INTO `files_storage` VALUES ('1650768865974288386', '2021年光盘资料一202101-14', 58, '');
INSERT INTO `files_storage` VALUES ('1650768867031252993', '2021年光盘资料一202101-15', 58, '');
INSERT INTO `files_storage` VALUES ('1650768867299688449', '2021年光盘资料一202101-16', 58, '');
INSERT INTO `files_storage` VALUES ('1650768867396157441', '2021年光盘资料一202101-17', 58, '');
INSERT INTO `files_storage` VALUES ('1650768868562173953', '2021年光盘资料一202101-18', 58, '');
INSERT INTO `files_storage` VALUES ('1650768869078073346', '2021年光盘资料一202101-19', 58, '');
INSERT INTO `files_storage` VALUES ('1650768869178736642', '2021年光盘资料一202101-20', 58, '');
INSERT INTO `files_storage` VALUES ('1650768871854702593', '存储器\\光盘资料\\七\\7-55', 58, '');
INSERT INTO `files_storage` VALUES ('1650768872009891841', '2021年光盘资料一202101-21', 58, '');
INSERT INTO `files_storage` VALUES ('1650768872148303873', '2021年光盘资料一202101-22', 58, '');
INSERT INTO `files_storage` VALUES ('1650768872630648833', '2021年光盘资料一202101-23', 58, '');
INSERT INTO `files_storage` VALUES ('1650768873146548225', '2021年光盘资料一202101-24', 58, '');
INSERT INTO `files_storage` VALUES ('1650768873423372289', '2021年光盘资料二202102-25', 58, '');
INSERT INTO `files_storage` VALUES ('1650768875126259713', '2021年光盘资料二202102-26', 58, '');
INSERT INTO `files_storage` VALUES ('1650768875495358465', '2021年光盘资料二202102-27', 58, '');
INSERT INTO `files_storage` VALUES ('1650768875872845825', '2021年光盘资料二202102-28', 58, '');
INSERT INTO `files_storage` VALUES ('1650768876346802177', '存储器\\光盘资料\\七\\7-22', 58, '');
INSERT INTO `files_storage` VALUES ('1650768876447465474', '2021年光盘资料二202102-29', 58, '');
INSERT INTO `files_storage` VALUES ('1650768877533790209', '2021年光盘资料二202102-30', 58, '');
INSERT INTO `files_storage` VALUES ('1650768877911277569', '2021年光盘资料二202102-31', 58, '');
INSERT INTO `files_storage` VALUES ('1650768878179713025', '2021年光盘资料二202102-32', 58, '');
INSERT INTO `files_storage` VALUES ('1650768878452342785', '2021年光盘资料二202102-33', 58, '');
INSERT INTO `files_storage` VALUES ('1650768878980825090', '存储器\\光盘资料\\七\\7-27', 58, '');
INSERT INTO `files_storage` VALUES ('1650768879077294081', '2021年光盘资料二202102-34', 58, '');
INSERT INTO `files_storage` VALUES ('1650768879714828289', '2021年光盘资料二202102-35', 58, '');
INSERT INTO `files_storage` VALUES ('1650768880163618818', '2021年光盘资料二202102-36', 58, '');
INSERT INTO `files_storage` VALUES ('1650768881161863170', '2021年光盘资料二202102-37', 58, '');
INSERT INTO `files_storage` VALUES ('1650768881581293570', '2021年光盘资料二202102-38', 58, '');
INSERT INTO `files_storage` VALUES ('1650768881942003713', '2021年光盘资料二202102-39', 58, '');
INSERT INTO `files_storage` VALUES ('1650768882424348673', '2021年光盘资料二202102-40', 58, '');
INSERT INTO `files_storage` VALUES ('1650768882986385410', '存储器\\光盘资料\\七\\7-17', 58, '');
INSERT INTO `files_storage` VALUES ('1650768883053494273', '2021年光盘资料二202102-41', 58, '');
INSERT INTO `files_storage` VALUES ('1650768883410010114', '存储器\\光盘资料\\七\\7-51', 58, '');
INSERT INTO `files_storage` VALUES ('1650768883510673409', '2021年光盘资料二202102-42', 58, '');
INSERT INTO `files_storage` VALUES ('1650768884471169025', '2021年光盘资料三202103-43', 58, '');
INSERT INTO `files_storage` VALUES ('1650768885129674753', '2021年光盘资料三202103-44', 58, '');
INSERT INTO `files_storage` VALUES ('1650768885679128577', '2021年光盘资料三202103-45', 58, '');
INSERT INTO `files_storage` VALUES ('1650768886371188737', '2021年光盘资料三202103-46', 58, '');
INSERT INTO `files_storage` VALUES ('1650768886983557122', '2021年光盘资料三202103-47', 58, '');
INSERT INTO `files_storage` VALUES ('1650768887172300801', '2021年光盘资料三202103-48', 58, '');
INSERT INTO `files_storage` VALUES ('1650768887356850178', '存储器\\光盘资料\\七\\7-52', 58, '');
INSERT INTO `files_storage` VALUES ('1650768887457513474', '2021年光盘资料三202103-49', 58, '');
INSERT INTO `files_storage` VALUES ('1650768888082464770', '存储器\\光盘资料\\七\\7-23', 58, '');
INSERT INTO `files_storage` VALUES ('1650768888183128065', '2021年光盘资料三202103-50', 58, '');
INSERT INTO `files_storage` VALUES ('1650768888673861633', '2021年光盘资料三202103-51', 58, '');
INSERT INTO `files_storage` VALUES ('1650768888875188226', '存储器\\光盘资料\\七\\7-29', 58, '');
INSERT INTO `files_storage` VALUES ('1650768889357533186', '2021年光盘资料三202103-52', 58, '');
INSERT INTO `files_storage` VALUES ('1650768889999261698', '2021年光盘资料三202103-53', 58, '');
INSERT INTO `files_storage` VALUES ('1650768890364166145', '存储器\\光盘资料\\七\\7-53', 58, '');
INSERT INTO `files_storage` VALUES ('1650768890548715521', '2021年光盘资料三202103-54', 58, '');
INSERT INTO `files_storage` VALUES ('1650768890829733890', '2021年光盘资料三202103-55', 58, '');
INSERT INTO `files_storage` VALUES ('1650768891022671874', '存储器\\光盘资料\\七\\7-36', 58, '');
INSERT INTO `files_storage` VALUES ('1650768891660206081', '2021年光盘资料三202103-56', 58, '');
INSERT INTO `files_storage` VALUES ('1650768892192882689', '2021年光盘资料三202103-57', 58, '');
INSERT INTO `files_storage` VALUES ('1650768892574564353', '存储器\\光盘资料\\七\\7-54', 58, '');
INSERT INTO `files_storage` VALUES ('1650768892935274498', '2021年光盘资料三202103-58', 58, '');
INSERT INTO `files_storage` VALUES ('1650768893203709954', '2021年光盘资料三202103-59', 58, '');
INSERT INTO `files_storage` VALUES ('1650768893920935937', '2021年光盘资料三202103-60', 58, '');
INSERT INTO `files_storage` VALUES ('1650768894361337858', '2021年光盘资料三202103-61', 58, '');
INSERT INTO `files_storage` VALUES ('1650768894948540417', '存储器\\光盘资料\\七\\7-66', 58, '');
INSERT INTO `files_storage` VALUES ('1650768895053398017', '2021年光盘资料三202103-62', 58, '');
INSERT INTO `files_storage` VALUES ('1650768895242141697', '2021年光盘资料三202103-63', 58, '');
INSERT INTO `files_storage` VALUES ('1650768895703515138', '2021年光盘资料三202103-64', 58, '');
INSERT INTO `files_storage` VALUES ('1650768896668205058', '2021年光盘资料四202104-65', 58, '');
INSERT INTO `files_storage` VALUES ('1650768896848560129', '2021年光盘资料四202104-66', 58, '');
INSERT INTO `files_storage` VALUES ('1650768896945029121', '2021年光盘资料四202104-67', 58, '');
INSERT INTO `files_storage` VALUES ('1650768897385431042', '2021年光盘资料四202104-68', 58, '');
INSERT INTO `files_storage` VALUES ('1650768897666449409', '2021年光盘资料四202104-69', 58, '');
INSERT INTO `files_storage` VALUES ('1650768898400452610', '存储器\\光盘资料\\七\\7-58', 58, '');
INSERT INTO `files_storage` VALUES ('1650768899000238081', '2021年光盘资料四202104-70', 58, '');
INSERT INTO `files_storage` VALUES ('1650768899864264705', '2021年光盘资料四202104-71', 58, '');
INSERT INTO `files_storage` VALUES ('1650768900057202689', '2021年光盘资料四202104-72', 58, '');
INSERT INTO `files_storage` VALUES ('1650768901063835650', '2021年光盘资料四202104-73', 58, '');
INSERT INTO `files_storage` VALUES ('1650768901156110338', '2021年光盘资料四202104-74', 58, '');
INSERT INTO `files_storage` VALUES ('1650768902229852162', '2021年光盘资料四202104-75', 58, '');
INSERT INTO `files_storage` VALUES ('1650768902410207233', '2021年光盘资料四202104-76', 58, '');
INSERT INTO `files_storage` VALUES ('1650768902825443329', '2021年光盘资料四202104-78', 58, '');
INSERT INTO `files_storage` VALUES ('1650768903156793346', '2021年光盘资料四202104-79', 58, '');
INSERT INTO `files_storage` VALUES ('1651393519847997441', '2021年光盘资料四202104-80', 58, '');
INSERT INTO `files_storage` VALUES ('1651393520871407618', '2021年光盘资料四202104-81', 58, '');
INSERT INTO `files_storage` VALUES ('1651393520993042433', '2021年光盘资料四202104-82', 58, '');
INSERT INTO `files_storage` VALUES ('1651393521672519681', '2021年光盘资料四202104-83', 58, '');
INSERT INTO `files_storage` VALUES ('1651393522062589954', '2021年光盘资料四202104-84', 58, '');
INSERT INTO `files_storage` VALUES ('1651393522268110849', '存储器\\光盘资料\\七\\7-68', 58, '');
INSERT INTO `files_storage` VALUES ('1651393522469437442', '2021年光盘资料四202104-85', 58, '');
INSERT INTO `files_storage` VALUES ('1651393523207634945', '2021年光盘资料四202104-86', 58, '');
INSERT INTO `files_storage` VALUES ('1651393523513819137', '存储器\\光盘资料\\七\\7-75', 58, '');
INSERT INTO `files_storage` VALUES ('1651393523622871041', '2021年光盘资料四202104-87', 58, '');
INSERT INTO `files_storage` VALUES ('1651393523933249538', '2021年光盘资料四202104-88', 58, '');
INSERT INTO `files_storage` VALUES ('1651393524310736898', '2021年光盘资料四202104-89', 58, '');
INSERT INTO `files_storage` VALUES ('1651393524994408450', '2021年光盘资料四202104-90', 58, '');
INSERT INTO `files_storage` VALUES ('1651393525304786946', '2021年光盘资料四202104-91', 58, '');
INSERT INTO `files_storage` VALUES ('1651393525501919234', '2021年光盘资料四202104-92', 58, '');
INSERT INTO `files_storage` VALUES ('1651393526999285762', '存储器\\光盘资料\\七\\7-72', 58, '');
INSERT INTO `files_storage` VALUES ('1651393527246749697', '2021年光盘资料四202104-93', 58, '');
INSERT INTO `files_storage` VALUES ('1651393528618287105', '2021年光盘资料四202104-94', 58, '');
INSERT INTO `files_storage` VALUES ('1651393528899305473', '2021年光盘资料四202104-95', 58, '');
INSERT INTO `files_storage` VALUES ('1651393529763332097', '2021年光盘资料四202104-96', 58, '');
INSERT INTO `files_storage` VALUES ('1651393531168423937', '存储器\\光盘资料\\七\\7-73', 58, '');
INSERT INTO `files_storage` VALUES ('1651393531269087233', '2021年光盘资料四202104-97', 58, '');
INSERT INTO `files_storage` VALUES ('1651393531646574594', '2021年光盘资料四202104-98', 58, '');
INSERT INTO `files_storage` VALUES ('1651393531831123970', '存储器\\光盘资料\\七\\7-76', 58, '');
INSERT INTO `files_storage` VALUES ('1651393532019867650', '2021年光盘资料四202104-99', 58, '');
INSERT INTO `files_storage` VALUES ('1651393532758065153', '2021年光盘资料四202105-100', 58, '');
INSERT INTO `files_storage` VALUES ('1651393534049910785', '2021年光盘资料四202105-101', 58, '');
INSERT INTO `files_storage` VALUES ('1651393534863605761', '存储器\\光盘资料\\七\\7-78', 58, '');
INSERT INTO `files_storage` VALUES ('1651393534981046273', '存储器\\光盘资料\\七\\7-70', 58, '');
INSERT INTO `files_storage` VALUES ('1651393535081709570', '2021年光盘资料四202105-102', 58, '');
INSERT INTO `files_storage` VALUES ('1651393537006895105', '2021年光盘资料四202105-103', 58, '');
INSERT INTO `files_storage` VALUES ('1651393537099169794', '2021年光盘资料四202105-104', 58, '');
INSERT INTO `files_storage` VALUES ('1651393538021916674', '2021年光盘资料四202105-105', 58, '');
INSERT INTO `files_storage` VALUES ('1651393538483290114', '存储器\\光盘资料\\七\\7-80', 58, '');
INSERT INTO `files_storage` VALUES ('1651393538588147714', '2021年光盘资料四202105-106', 58, '');
INSERT INTO `files_storage` VALUES ('1651491714217279490', '存储器\\光盘资料\\七\\7-1', 58, '');
INSERT INTO `files_storage` VALUES ('1651491714506686465', '存储器\\光盘资料\\七\\7-2', 58, '');
INSERT INTO `files_storage` VALUES ('1651491714779316225', '存储器\\光盘资料\\七\\7-3', 58, '');
INSERT INTO `files_storage` VALUES ('1651491716008247297', '存储器\\光盘资料\\七\\7-5', 58, '');
INSERT INTO `files_storage` VALUES ('1651491716914216961', '存储器\\光盘资料\\七\\7-6', 58, '');
INSERT INTO `files_storage` VALUES ('1651491717002297345', '存储器\\光盘资料\\七\\7-7', 58, '');
INSERT INTO `files_storage` VALUES ('1651491717581111297', '存储器\\光盘资料\\七\\7-9', 58, '');
INSERT INTO `files_storage` VALUES ('1651491717878906881', '存储器\\光盘资料\\七\\7-10', 58, '');
INSERT INTO `files_storage` VALUES ('1651491718227034114', '存储器\\光盘资料\\七\\7-11', 58, '');
INSERT INTO `files_storage` VALUES ('1651491718319308802', '存储器\\光盘资料\\七\\7-12', 58, '');
INSERT INTO `files_storage` VALUES ('1651491718617104386', '存储器\\光盘资料\\七\\7-13', 58, '');
INSERT INTO `files_storage` VALUES ('1651491718927482881', '存储器\\光盘资料\\七\\7-14', 58, '');
INSERT INTO `files_storage` VALUES ('1651491719187529729', '存储器\\光盘资料\\七\\7-15', 58, '');
INSERT INTO `files_storage` VALUES ('1651491719363690498', '存储器\\光盘资料\\七\\7-16', 58, '');
INSERT INTO `files_storage` VALUES ('1651491719707623426', '存储器\\光盘资料\\七\\7-18', 58, '');
INSERT INTO `files_storage` VALUES ('1651491721846718465', '存储器\\光盘资料\\七\\7-19', 58, '');
INSERT INTO `files_storage` VALUES ('1651491722882711554', '存储器\\光盘资料\\七\\7-20', 58, '');
INSERT INTO `files_storage` VALUES ('1651491724476547074', '存储器\\光盘资料\\七\\7-21', 58, '');
INSERT INTO `files_storage` VALUES ('1654688851394560002', '2022年光盘资料三202203-68', 58, '');
INSERT INTO `files_storage` VALUES ('1654688851507806209', '存储器\\光盘资料\\七\\7-24', 58, '');
INSERT INTO `files_storage` VALUES ('1654688851574915073', '存储器\\光盘资料\\七\\7-25', 58, '');
INSERT INTO `files_storage` VALUES ('1654688851709132801', '存储器\\光盘资料\\七\\7-26', 58, '');
INSERT INTO `files_storage` VALUES ('1654688852254392322', '存储器\\光盘资料\\七\\7-28', 58, '');
INSERT INTO `files_storage` VALUES ('1654688852560576513', '存储器\\光盘资料\\七\\7-30', 58, '');
INSERT INTO `files_storage` VALUES ('1654688853172944897', '存储器\\光盘资料\\七\\7-31', 58, '');
INSERT INTO `files_storage` VALUES ('1654688854255075330', '存储器\\光盘资料\\七\\7-32', 58, '');
INSERT INTO `files_storage` VALUES ('1654688854640951298', '存储器\\光盘资料\\七\\7-33', 58, '');
INSERT INTO `files_storage` VALUES ('1654688855785996290', '存储器\\光盘资料\\七\\7-34', 58, '');
INSERT INTO `files_storage` VALUES ('1654688855911825410', '存储器\\光盘资料\\七\\7-35', 58, '');
INSERT INTO `files_storage` VALUES ('1654688856301895682', '存储器\\光盘资料\\七\\7-37', 58, '');
INSERT INTO `files_storage` VALUES ('1654688856662605825', '存储器\\光盘资料\\七\\7-38', 58, '');
INSERT INTO `files_storage` VALUES ('1654688857237225474', '存储器\\光盘资料\\七\\7-39', 58, '');
INSERT INTO `files_storage` VALUES ('1654688857824428033', '存储器\\光盘资料\\七\\7-40', 58, '');
INSERT INTO `files_storage` VALUES ('1654688858122223617', '存储器\\光盘资料\\七\\7-41', 58, '');
INSERT INTO `files_storage` VALUES ('1654688859154022401', '存储器\\光盘资料\\七\\7-42', 58, '');
INSERT INTO `files_storage` VALUES ('1654688860592668673', '存储器\\光盘资料\\七\\7-43', 58, '');
INSERT INTO `files_storage` VALUES ('1654688862232641537', '存储器\\光盘资料\\七\\7-44', 58, '');
INSERT INTO `files_storage` VALUES ('1654688862320721921', '存储器\\光盘资料\\七\\7-45', 58, '');
INSERT INTO `files_storage` VALUES ('1654688862467522561', '存储器\\光盘资料\\七\\7-46', 58, '');
INSERT INTO `files_storage` VALUES ('1654729349823987713', '存储器、光盘资料20217-48', 58, '');
INSERT INTO `files_storage` VALUES ('1654756034703261698', '2022年光盘资料二202203-72', 58, '');
INSERT INTO `files_storage` VALUES ('1654756751585312770', '2022年光盘资料三202203-72', 58, '');
INSERT INTO `files_storage` VALUES ('1654757996115001345', '2022年光盘资料三202203-59', 58, '');
INSERT INTO `files_storage` VALUES ('1654759129814401026', '2022年光盘资料三202203-60', 58, '');
INSERT INTO `files_storage` VALUES ('1654759961054150658', '2022年光盘资料三202203-61', 58, '');
INSERT INTO `files_storage` VALUES ('1654760275903774722', '2022年光盘资料三202203-67', 58, '');
INSERT INTO `files_storage` VALUES ('1654760945390190594', '2022年光盘资料三202203-63', 58, '');
INSERT INTO `files_storage` VALUES ('1654762690828828673', '2022年光盘资料三202203-70', 58, '');
INSERT INTO `files_storage` VALUES ('1654762691072098305', '2022年光盘资料三202203-71', 58, '');
INSERT INTO `files_storage` VALUES ('1654763061269757953', '2022年光盘资料三202203-74', 58, '');
INSERT INTO `files_storage` VALUES ('1654764692367474689', '2022年光盘资料三202203-62', 58, '');
INSERT INTO `files_storage` VALUES ('1654765302164750338', '2022年光盘资料三202203-64', 58, '');
INSERT INTO `files_storage` VALUES ('1654765584827285505', '2022年光盘资料三202203-65', 58, '');
INSERT INTO `files_storage` VALUES ('1654766036100841473', '2022年光盘资料三202203-66', 58, '');
INSERT INTO `files_storage` VALUES ('1654767388935847937', '2022年光盘资料三202203-69', 58, '');
INSERT INTO `files_storage` VALUES ('1654767389216866306', '2022年光盘资料三202203-73', 58, '');
INSERT INTO `files_storage` VALUES ('1654767389355278338', '2022年光盘资料三202203-75', 58, '');
INSERT INTO `files_storage` VALUES ('1656132427622121474', '存储器\\光盘资料\\七\\7-47', 58, '');
INSERT INTO `files_storage` VALUES ('1656132427865391105', '存储器\\光盘资料\\七\\7-49', 58, '');
INSERT INTO `files_storage` VALUES ('1656132428553256961', '存储器\\光盘资料\\七\\7-50', 58, '');
INSERT INTO `files_storage` VALUES ('1656132429106905090', '存储器\\光盘资料\\七\\7-56', 58, '');
INSERT INTO `files_storage` VALUES ('1656132429333397505', '存储器\\光盘资料\\七\\7-57', 58, '');
INSERT INTO `files_storage` VALUES ('1656132429677330434', '存储器\\光盘资料\\七\\7-59', 58, '');
INSERT INTO `files_storage` VALUES ('1656132429790576641', '存储器\\光盘资料\\七\\7-60', 58, '');
INSERT INTO `files_storage` VALUES ('1656132430029651970', '存储器\\光盘资料\\七\\7-61', 58, '');
INSERT INTO `files_storage` VALUES ('1656132430109343746', '存储器\\光盘资料\\七\\7-62', 58, '');
INSERT INTO `files_storage` VALUES ('1656132430465859586', '存储器\\光盘资料\\七\\7-63', 58, '');
INSERT INTO `files_storage` VALUES ('1656132430738489345', '存储器\\光盘资料\\七\\7-64', 58, '');
INSERT INTO `files_storage` VALUES ('1656132430956593153', '存储器\\光盘资料\\七\\7-69', 58, '');
INSERT INTO `files_storage` VALUES ('1656132431770288130', '存储器\\光盘资料\\七\\7-71', 58, '');
INSERT INTO `files_storage` VALUES ('1656132432642703361', '存储器\\光盘资料\\七\\7-82', 58, '');
INSERT INTO `files_storage` VALUES ('1656132433657724929', '存储器\\光盘资料\\七\\7-83', 58, '');
INSERT INTO `files_storage` VALUES ('1656132434169430018', '存储器\\光盘资料\\七\\7-84', 58, '');
INSERT INTO `files_storage` VALUES ('1656132434936987649', '存储器\\光盘资料\\七\\7-85', 58, '');
INSERT INTO `files_storage` VALUES ('1656132435691962370', '存储器\\光盘资料\\七\\7-86', 58, '');
INSERT INTO `files_storage` VALUES ('1661266585969229826', '存储器\\光盘资料\\七\\7-87', 58, '');
INSERT INTO `files_storage` VALUES ('1661266586862616578', '存储器\\光盘资料\\七\\7-88', 58, '');
INSERT INTO `files_storage` VALUES ('1661266587198160897', '存储器\\光盘资料\\七\\7-89', 58, '');
INSERT INTO `files_storage` VALUES ('1661266587722448897', '存储器\\光盘资料\\七\\7-90', 58, '');
INSERT INTO `files_storage` VALUES ('1661266588091547650', '存储器\\光盘资料\\七\\7-81', 58, '');
INSERT INTO `files_storage` VALUES ('1661266588536143874', '存储器\\光盘资料\\七\\7-92', 58, '');

-- ----------------------------
-- 67、cmc单价备注表
-- ----------------------------
drop table if exists `cmc_price_remark`;
create table `cmc_price_remark`  (
  `price_remark_id` int 		not null auto_increment comment '结算备注id',
  `work_type`		varchar(50)	default null comment '工程项目',
  `remark`			varchar(500) default null comment '备注',
  primary key (`price_remark_id`)
) engine = innodb comment='单价备注表';

-- ----------------------------
-- 初始化-单价备注表数据
-- ----------------------------
INSERT INTO `cmc_price_remark` VALUES (1, '外业', '⑴根据项目简单程度，结算标准可按一般地类标准降低 5%～20%结算；<br/> ⑵高原困难系数等其他增加系数按一般地类作起算标准；<br/> ⑶国内项目（含西藏）测区平均高程 2000m～2499m、2500m～2999m、3000m～3499m、3500m～3999m、4000m～4499m、4500m 以上，分别增加高原困难系数 5%、10%、15%、20%、25%、40%；特别困难地区、井下作业等项目，按实际困难程度增加困难系数；<br/> ⑷东南亚地区国外项目增加 50%，非洲、西亚等地区国外项目增加 70%，项目委托费用在工作开展前提交预算申请，经审批后执行。');
INSERT INTO `cmc_price_remark` VALUES (2, '外业-GNSS、控制网测量', '⑴GNSS 按要求增加一倍观测时间，增加 30%；<br/> ⑵施工控制网、监测网按 60%（土建单独结算）；<br/> ⑶三角网观测执行此标准，边角网观测增加 60%；<br/> ⑷利用 RTK 测量，埋石标志按 70%、刻石标志按 50%计算；<br/> ⑸利用已有控制点按 60%计算；<br/> ⑹此标准包含一般项目控制点位选埋、观测计算等工作。');
INSERT INTO `cmc_price_remark` VALUES (3, '外业-导线测量', '⑴代替四等三角高程增加 30%；<br/> ⑵代替三等三角高程（单程双测）增加 60%；<br/> ⑶电磁波测距、已知边检测按此标准；<br/> ⑷双支导线按 70%。');
INSERT INTO `cmc_price_remark` VALUES (4, '外业-地形图测绘', '⑴地形地类图根据地类、权属复杂程度增加 15%～20%；<br/> ⑵无人机、航片、卫片、机载激光等航测外业分别按 40%、40%、20%、20%计算，其中像控点测量、调绘、补测、检查点测量分别占比为 10%、40%、40%、10%，不生产 DLG 项目的像控点测量按 5%计算；<br/> ⑶1:500、1:1000 地形图采用激光点云结合立体像对或实景三维模型采集地物成图，按不同方式成图面积结算；<br/> ⑷机动船配合 RTK、无人测量船等测绘水下地形图按此标准；<br/> ⑸带状地形图图面宽度不足 20cm 时，增加 15%带状系数；<br/> ⑹河道宽度大于图上 5cm 时，扣除河道面积；<br/> ⑺光伏、风电等新能源项目按 50%；<br/> ⑻本结算标准包含地形图数字化编辑工作。');
INSERT INTO `cmc_price_remark` VALUES (5, '外业-断面测量', '断面测量<br/> ⑴河道纵断面、同时水面线按 60%；<br/> ⑵河道横断面长度不足 200m，按 200m；<br/> ⑶河道纵断面长度不足 1000m，按 1000m；<br/> ⑷河道纵断面实测河道平面图增加 30%；<br/> ⑸库区泥沙淤积断面基点土建费用，项目开展前提交预算申请，经审批后纳入结算；<br/> ⑹断面基点不埋石，按断面基点测量的 50%；<br/> ⑺公路断面按 10%；<br/> ⑻内业量测断面以工作开展前核准的内业工天结算。<br/> 界桩测设<br/> ⑴临时界桩测设、电子界桩按 20%；<br/> ⑵水库定线界桩按 70%；<br/> ⑶界桩预制、运输、埋设费用在项目开展前提交预算申请，经审批后纳入结算；<br/> ⑷钻孔放测、独立重要点位放测按此标准计算。');
INSERT INTO `cmc_price_remark` VALUES (6, '外业-高程测量', '水准测量<br/> ⑴按水准路线长度计算；<br/> ⑵三角高程测量执行按相应等级水准测量的 70%；<br/> ⑶爬山水准、洞内水准增加 60%～100%。<br/> 跨河水准测量<br/> ⑴跨河距离小于 500m，按一般地类；<br/> ⑵跨河距离大于等于 500m，按困难地类；<br/> 跨河距离大于 1000m，按困难地类增加 50%。');
INSERT INTO `cmc_price_remark` VALUES (7, '外业-公路测量', '⑴公路中桩、角桩测设按此标准，公路断面按横断面测量标<br/> 准 10%计算；<br/> ⑵公路参考点按 20%计算；<br/> ⑶不配合设计专业的公路测量按此标准 50%计算。');
INSERT INTO `cmc_price_remark` VALUES (8, '外业-航飞', '⑴费用包含工作期间食宿费，不扣减汽车台班费；<br/> ⑵部门承担航飞任务与本部门其他外业工作结合开展，不报销住宿费，不扣减汽车台班费；<br/> ⑶不执行测区高原困难系数；<br/> ⑷测区地形高差 600m～799m 或测区平均高程 2000m～2999m，增加 20%；测区地形高差 800m～1000m 或测区平均高程 3000m～3999m，增加 30%；测区地形高差 1000m 以上或测区平均高程 4000m 以上，增加 50%；不再增加其他困难系数。');
INSERT INTO `cmc_price_remark` VALUES (9, '外业-激光数据采集', '⑴费用包含工作期间食宿费，不扣减汽车台班费；<br/> ⑵部门承担航飞任务与本部门其他外业工作结合开展，不报销住宿费，不扣减汽车台班费；<br/> ⑶不执行测区高原困难系数；<br/> ⑷测区地形高差 600m～799m 或测区平均高程 2000m～2999m，增加 20%；测区地形高差 800m～1000m 或测区平均高程 3000m～3999m，增加 30%；测区地形高差 1000m 以上或测区平均高程 4000m 以上，增加 50%；不再增加其他困难系数。');
INSERT INTO `cmc_price_remark` VALUES (10, '外业-其他', '配合测量<br/> ⑴费用包含工作期间食宿费，不扣减汽车台班费。<br/> 进出场<br/> ⑴使用汽车（含租用车辆）台班超过 5 天（不含进出场）的项目，按 180 元/辆.天减扣台班使用费；<br/> ⑵省内（不含成都市）、省外项目进出场分别按 300 元/人天、330 元/人天纳入结算费用，不再报销差旅费；<br/> ⑶项目进出场乘坐公共交通，交通费用按票据纳入结算。');
INSERT INTO `cmc_price_remark` VALUES (11, '外业-施控网土建', '⑴已施工建设工地为一般地类；<br/> ⑵监测基准网点增加 20%；<br/> ⑶监测点墩标按 70%；<br/> ⑷困难测区土建费用，土建开展前提交预算申请，经审批后<br/> 纳入结算。');
INSERT INTO `cmc_price_remark` VALUES (12, '内业', '⑴根据项目简单程度，结算标准可按一般地类标准降低 5%～20%结算;<br/> ⑵内业单个项目（不含坐标转换）按标准结算不足 600 元时，按 600 元结算；<br/> ⑶经审批按内业工天结算时，按 210 元/人天计算。');
INSERT INTO `cmc_price_remark` VALUES (13, '内业-DEM、地形面', '⑴利用分类后的点云数据制作 DEM 按 40%。');
INSERT INTO `cmc_price_remark` VALUES (14, '内业-DOM', '⑴不匀色、裁切、分幅按 60%。');
INSERT INTO `cmc_price_remark` VALUES (15, '内业-比例尺缩放', '⑴地形图缩放按缩放后的比例尺，比例尺放大按 70%、比例尺缩小按 120%。');
INSERT INTO `cmc_price_remark` VALUES (16, '内业-编图', '⑴适用于对地形图编制有特殊要求或数字化专题项目；<br/> ⑵地形地类图增加 15%；<br/> ⑶外业实测电子图数字化按 60%；<br/> ⑷收集正式地形图分幅裁切整理按 30%。');
INSERT INTO `cmc_price_remark` VALUES (17, '内业-点云分类', '⑴机载激光数据预处理按一般地类标准的 25%；<br/> ⑵车载、手持激光数据预处理按一般地类标准的 35%。');
INSERT INTO `cmc_price_remark` VALUES (18, '内业-航测', '⑴航片、卫片、无人机航测成图执行此标准；<br/> ⑵粗编应满足甲方及归档要求，特殊项目精编增加 17%；<br/> ⑶地形地类图增加 15%；<br/> ⑷空三加密及影像匀色按 5%；<br/> ⑸光伏、风电等新能源项目按 50%。');
INSERT INTO `cmc_price_remark` VALUES (19, '内业-激光数据预处理', '⑴机载激光数据预处理按一般地类标准的 25%；<br/> ⑵车载、手持激光数据预处理按一般地类标准的 35%。');
INSERT INTO `cmc_price_remark` VALUES (20, '内业-激光制图', '⑴利用预处理后的激光数据测制地形图按此标准计算，包括点云分类、地物采集、地形图编绘等全流程；<br/> ⑵地形地类图增加部分参照航测成图；<br/> ⑶光伏、风电等新能源项目按 50%。');
INSERT INTO `cmc_price_remark` VALUES (21, '内业-三维模型', '⑴根据内业复杂程度，按 1～2 倍计算（参考航测空三的 1～2 倍）；<br/> ⑵修模工作按 100m*100m 网格计算实际修模工作量，根据网格复杂程度按 20～50 元/格计算。');
INSERT INTO `cmc_price_remark` VALUES (22, '内业-坐标转换', '⑴坐标转换、电子沙盘制作，按工作前核准的内业工天结算。');

-- ----------------------------
-- 68、cmc设备费用表
-- ----------------------------
drop table if exists `cmc_device_expense`;
create table `cmc_device_expense`  (
  `device_expense_id`	int		not null auto_increment comment '设备费用id',
  `device_id` 			int 			default null 	comment '设备id',
  `car_id` 				int 			default null 	comment '车辆id',
  `user_id` 			bigint 			default null 	comment '负责人id',
  `expense_type`		char(1) 		default null 	comment '费用类型（0检定费、1维修保养费）',
  `expense`				decimal(10, 2) 	default null 	comment '费用金额',
  `occur_date`			date			default null 	comment '发生日期',
  `remark`				varchar(255)	default null 	comment '备注',
  `document`			varchar(255)	default null 	comment '附件',
  primary key (`device_expense_id`)
) engine = innodb comment = 'cmc设备费用表';

-- ----------------------------
-- 初始化-设备费用表数据
-- ----------------------------

-- ----------------------------
-- 69、cmc设备报废表
-- ----------------------------
drop table if exists `cmc_device_scrap`;
create table `cmc_device_scrap`  (
  `device_scrap_id`		int		not null auto_increment comment '设备报废id',
  `device_id` 			int 			default null 	comment '设备id',
  `car_id` 				int 			default null 	comment '车辆id',
  `cost`				decimal(10, 2) 	default null 	comment '原价值',
  `scrap_date`			date			default null 	comment '报废日期',
  `reason`				varchar(255)	default null 	comment '报废原因',
  `deal`				varchar(255)	default null 	comment '处理结果',
  `remark`				varchar(255)	default null 	comment '备注',
  `document`			varchar(255)	default null 	comment '附件',
  primary key (`device_scrap_id`)
) engine = innodb comment = 'cmc设备报废表';

-- ----------------------------
-- 初始化-设备报废表数据
-- ----------------------------

-- ----------------------------
-- 70、cmc项目变更表
-- ----------------------------
drop table if exists `cmc_project_change`;
create table `cmc_project_change`  (
  `change_id` 		char(19) 		not null				comment '变更id',
  `project_id` 		char(19) 		default null 			comment '项目id',
  `content` 		text			default null 			comment '变更内容',
  `registrant` 		bigint 			default null 			comment '登记人',
  `register_time` 	date 			default null 			comment '登记时间',
  primary key (`change_id`)
) engine = innodb comment = 'cmc项目变更表';

-- ----------------------------
-- 初始化-项目变更表数据
-- ----------------------------
INSERT INTO `cmc_project_change` VALUES ('1648881410555772930', '1648881410555772930', '4月24日增加1:2000地形地类图补测2.9km²，,完成时间请与用户协商。城乡分公司联系人：王勇，15928683676', 20, '2023-04-26');
INSERT INTO `cmc_project_change` VALUES ('1648881410631270403', '1648881410631270403', '工作量增加至63个平方公里。', 13, '2023-05-16');
INSERT INTO `cmc_project_change` VALUES ('1648881410631270434', '1648881410631270434', '牙根一级比地吊桥和苦乐沟中桩放线测量及1:1000地形图测绘，老路边线及高程测量。联系人基础设施分公司：严群18512826373/18482022565，完成时间与用户现场协商。', 20, '2024-04-30');
INSERT INTO `cmc_project_change` VALUES ('1648881410631270438', '1648881410631270438', 'ML公路控制网测量，控制网设计由技术部完成，并于基础设施分公司沟通后实施，完成时间待定。基础设施分公司联系人杨锐。', 20, '2024-04-26');
INSERT INTO `cmc_project_change` VALUES ('1648881410815819777', '1648881410815819777', '新增：1、困牛山水库1:1000水下地形测绘，面积为0.2平方公里（要求和之前测的1000图接边）； 2、困牛山水库引水渠1:1000地形图测绘，面积约0.4平方公里（已在2023C01中，本次为补下任务，在本项目中结算）。', 13, '2023-03-07');
INSERT INTO `cmc_project_change` VALUES ('1648881410832596993', '1648881410832596993', '拉哇水库CS20~拉哇坝址河段1:2000带状地形测绘（不含水下地形图）4月18日跟规划院王锐沟通落实明确实施。', 13, '2023-04-18');
INSERT INTO `cmc_project_change` VALUES ('1648881410866151425', '1648881410866151425', '5月15日，新增1:5000地形图测绘（德吉2#沟、麦村东西沟2块），预计61.28km²，联系人：城乡分公司陈歆怡17383469819，完成时间请杨振与用户协调。', 20, '2023-05-15');
INSERT INTO `cmc_project_change` VALUES ('1648881410866151525', '1648881410866151425', '4月20日新增ML库区德吉1、德吉2、麦村、甲格、卧龙5块地方1:1000地形图测绘，公司现场负责人杨振，完成时间请杨振与用户沟通。', 20, '2023-04-21');
INSERT INTO `cmc_project_change` VALUES ('1648881410866151625', '1648881410866151425', '新增甲格、真多村、麦村、卧龙噶加、里龙益当、里龙色比单噶、德吉居民点新址、扎绕拍立地坎娘、扎村9块地方1:2000地形图测绘工作，预计工作量6.9km²，联系人：陈歆怡17383469819', 20, '2023-03-15');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491342', '1648881411499491342', '2024.5.7杨俊主任通知本项目新增了1.7平方千米的1:2000地形图测绘工作。', 22, '2024-05-07');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491343', '1648881411499491343', '贡白路渣场1:2000地形图测绘，面积0.038km²，尽快完成。联系人：城乡分公司王增福：13281233292', 20, '2024-05-28');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491359', '1648881411499491359', '申弄沟右岸人工骨料场4.2平方公里1:2000地形图补测，工期按3月4日控制。', 13, '2024-02-28');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491363', '1648881411499491363', '新增上下库测图范围内DOM制作。', 13, '2023-09-01');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491365', '1648881411499491365', '偶曲及金沙江岩比河段的断面补充测量工作，断面测量共计26条。先测岩比段的，再测偶曲河段的断面。多与用户沟通，尽量满足他们的需要。联系人：城乡分公司王增福：13281233292，郑萍伟：13882289003', 20, '2023-10-12');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491372', '1648881411499491372', '汤坝外部供水1:1000地形图补测（2块），预计0.8km²；桥梁高程补测，补测地物、地形线及拍照等工作。联系人城乡分公司张波：13708019335。请尽快完成。', 20, '2023-12-28');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491375', '1648881411499491375', '排涝区域1:2000地形图测绘改为1:5000地形图测绘，平面和高程控制取消不做，1:1000地形图缩编成1:5000地形图并与新测1:5000地形图拼接', 20, '2023-07-05');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491378', '1648881411499491378', '新增1:1000地形图测绘4.160km²，1:5000地形图测绘6.002km²（用1:1000的地形图缩编），工期项目负责人与用户沟通为准。', 13, '2023-11-24');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491379', '1648881411499491379', '新增4.8平方公里隆巴下库1:5000地形图测量，工期暂按10天考虑。飞行范围可外扩一些。', 13, '2023-11-22');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491381', '1648881411499491381', '增加1条路界桩测设工作，工作量以与用户沟通完成量为准，完成时间与用户沟通。联系人城乡分公司：施蔺，13540784140', 20, '2023-11-24');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491383', '1648881411499491383', '大坪安置点1:1000地形图测绘，联系人：李宗锴,18081555510；完成时间2023.12.18.', 20, '2023-12-08');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491384', '1648881411499491384', '老木孔排水口高程测量，放点位置见陈爽提供的CAD图。黄色框框涉及的排水口都需要测一下，在河里面的就不用测了，拍照就行。联系人城乡分公司陈爽：17340088515。预计9月11日下周一进场，完成时间与用户协商。', 20, '2023-09-07');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491387', '1648881411499491387', 'ML国道G219大断面测量14条（1:500），同时水边线测量，航拍视频及岸坡照片等，联系人：规划院：蒋陶（13568827702）、曾强（17311299553）。', 20, '2023-12-07');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491472', '1648881411499491372', '汤坝供水线路1:1000地形图补测，联系人城乡分公司张波13708019335，请尽快安排完成。', 20, '2023-09-08');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491487', '1648881411499491387', 'ML库区公路坐标转换，联系人基础设施分公司高绍清', 20, '2023-08-10');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491587', '1648881411499491387', '桥位1:500水下地形图测绘，3座桥，每座桥300M*200M范围。完成时间杨振与用户沟通。联系人杨锐：15208223387', 20, '2023-06-02');
INSERT INTO `cmc_project_change` VALUES ('1648881411499491687', '1648881411499491387', '1:5000地形图测绘，11处，面积9.39平方公里，完成时间请杨振与用户协商。联系人：基础设施分公司聂柏琳18780019248', 20, '2023-06-02');
INSERT INTO `cmc_project_change` VALUES ('1648881412153802753', '1648881412153802753', '按测图范围提供DOM及三维地形面。', 13, '2022-10-27');
INSERT INTO `cmc_project_change` VALUES ('1648881412204134402', '1648881412204134402', '5000和2000范围需制作三维地形面。', 13, '2023-01-05');
INSERT INTO `cmc_project_change` VALUES ('1648881412220911618', '1648881412220911618', '白石河1:500地形图测绘项目，用户通知取消。通知人：城乡分公司凌源媛15320349072', 20, '2023-05-08');
INSERT INTO `cmc_project_change` VALUES ('1648881412220911718', '1648881412220911618', '白石河瞭望塔及巡护步道1:500地形图补测，预计0.066平方公里，联系人：城乡分公司赖臻瑞：13990155739，完成与赖臻瑞协商，尽快完成。', 20, '2023-05-06');
INSERT INTO `cmc_project_change` VALUES ('1648881412220911818', '1648881412220911618', '草米岗增测1:500地形图测绘，面积0.017353km²，完成时间请与用户沟通。', 20, '2023-02-17');
INSERT INTO `cmc_project_change` VALUES ('1648881412237688834', '1648881412237688834', '新增1:1000DOM制作，工作量以实际发生计。', 13, '2022-10-19');
INSERT INTO `cmc_project_change` VALUES ('1648881412254466049', '1648881412254466049', '新增1:1000DOM制作，工作量以实际发生计。', 13, '2022-10-19');
INSERT INTO `cmc_project_change` VALUES ('1648881412346740737', '1648881412346740737', '1:2000范围地形图改为地形地类图。', 13, '2022-08-26');
INSERT INTO `cmc_project_change` VALUES ('1648881412401266689', '1648881412401266689', '新增1：1万地形图测绘（修测）25.6平方公里。', 13, '2022-09-28');
INSERT INTO `cmc_project_change` VALUES ('1648881412514512898', '1648881412514512898', '新增2个平方公里1:1000地形地类图测绘，工期暂按20天考虑。', 13, '2022-08-17');
INSERT INTO `cmc_project_change` VALUES ('1648881412573233153', '1648881412573233153', '测图范围内需提供水下地形，待汛期结束后具备条件再施测。', 13, '2022-07-22');
INSERT INTO `cmc_project_change` VALUES ('1648881412682285058', '1648881412682285058', '1、工程区1:5000三维地形面制作（含水下地形） 2、右岸方案上库范围1:2000三维地形面制作 3、右岸方案下库进出水口1:2000三维地形面制作提交时间8月11日', 13, '2022-08-04');
INSERT INTO `cmc_project_change` VALUES ('1648881412736811010', '1648881412736811010', '新增溢洪道0.33平方公里1:1000地形图测绘，新增库区5000三维地形面。', 13, '2022-06-22');
INSERT INTO `cmc_project_change` VALUES ('1648881412892000257', '1648881412892000257', '新增0.88平方公里1:2000地形图测绘。', 13, '2022-08-22');
INSERT INTO `cmc_project_change` VALUES ('1648881412892000357', '1648881412892000257', '新增工程区1：2000地形图测绘5.98平方公里，新增1:5000地形图测绘4.28平方公里，新增各比例尺三维地形面，新增2个五等GNSS测量，新增四等高程测量3公里。工期以与业主沟通落实而定。', 13, '2022-07-04');
INSERT INTO `cmc_project_change` VALUES ('1648881413164630018', '1648881413164630018', '新增成雅工业园区百丈安置房一期房屋建筑面积测绘，预估面积5万平方米，城乡分公司联系人：邓韬略15882318271，完成时间10月19日。', 13, '2022-10-10');
INSERT INTO `cmc_project_change` VALUES ('1648881413164630118', '1648881413164630018', '新增百丈镇安置区二期项目1:500地形图测绘，面积约93465平方米。', 13, '2022-09-23');
INSERT INTO `cmc_project_change` VALUES ('1648881413181407233', '1648881413181407233', '台山黄茅岗工程区补充测量12平方公里（航飞按1：1000 精度、成图按1：5000精度），工期暂按外业飞行结束后5日内提交资用成果控制。', 13, '2022-07-14');
INSERT INTO `cmc_project_change` VALUES ('1648881413181407333', '1648881413181407233', '新增梅县杨背樟料场1:5000地形图4.32平方公里；梅县九龙嶂及台山黄茅岗工程区制作1:5000DOM及三维地形面（注意：料场不需要）。', 13, '2022-05-25');
INSERT INTO `cmc_project_change` VALUES ('1648881413210767362', '1648881413210767362', '1、大川镇停车场1:500地形图补测，预计0.2km²,2块； 2、杨开村停车场1:500地形图测绘，预计0.1km²。联系人：城乡分公司黄文虎，13982236680', 13, '2022-08-10');
INSERT INTO `cmc_project_change` VALUES ('1648881413210767462', '1648881413210767362', '新增工作内容：1、芦山县乐家坝停车楼1:500宗地图测绘0.1平方公里；联系人：城乡分公司黄文虎，13982236680', 13, '2022-08-05');
INSERT INTO `cmc_project_change` VALUES ('1648881413210767562', '1648881413210767362', '新增工作内容：1、芦山县乐家坝停车楼1:500地形图测绘0.1平方公里； 2、芦山县西街老财政局停车场1:500地形图测绘0.1平方公里； 3、芦山县黎明新村停车场1:500地形图测绘0.1平方公里； 4、芦山县大川镇文化站停车场1:500地形图测绘0.1平方公里； 5、芦山县大川镇露营地1:1000地形图测绘0.1平方公里； 6、五等GNSS测量20个。（2000国家大地坐标，85国家高程基准；）工期：6月16日前完成；联系人：城乡分公司赖臻瑞，13990155739', 13, '2022-06-02');
INSERT INTO `cmc_project_change` VALUES ('1648881413244321794', '1648881413244321794', '1:2000范围的地形图改为地形地类图，工期15天，移民专业联系人冯春：13981823592', 13, '2022-07-05');
INSERT INTO `cmc_project_change` VALUES ('1648881413244321894', '1648881413244321794', '1:2000范围内的缩编为1:5000，同时制作三维地形面。', 13, '2022-05-25');
INSERT INTO `cmc_project_change` VALUES ('1648881413412093953', '1648881413412093953', '新增约18平方公里1:1000DOM制作，范围已发赵洪，9月1日前提交。', 13, '2022-08-25');
INSERT INTO `cmc_project_change` VALUES ('1648881413483397121', '1648881413483397121', '新增楞古上坝址~楞古中坝址（力丘河汇口以下约300M）雅砻江干流河段、支流力丘河河口~河口以上2.5km河段的2430M高程以下1:1000地形图测绘（含水下），面积约0.415平方公里。', 13, '2022-04-08');
INSERT INTO `cmc_project_change` VALUES ('1648881413529534465', '1648881413529534465', '该范围内的水下地形复核工作1项。', 13, '2022-03-30');
INSERT INTO `cmc_project_change` VALUES ('1648881413667946498', '1648881413667946498', '孙家沟实物指标配合测量，2块地方，预计2人，5天。联系人城乡分公司张波13708019335.进场时间5月16日，完成时间5月22日', 13, '2022-05-11');
INSERT INTO `cmc_project_change` VALUES ('1648881413667946598', '1648881413667946498', '牛棚子沟泥石流治理工程初步设计1:1000地形图测绘工作量变更为0.52平方公里，新增牛棚子沟泥石流治理拟设坝1:500地形图测绘0.16平方公里，新增磨子沟取水口1:500地形图测绘0.1平方公里。', 13, '2022-02-25');
INSERT INTO `cmc_project_change` VALUES ('1648881414213206018', '1648881414213206018', '放样测量40点（图根精度），视频航拍飞行8km', 13, '2022-01-23');
INSERT INTO `cmc_project_change` VALUES ('1648881414410338305', '1648881414410338305', '1:2000范围的地形图改为地形地类图，工期15天，移民专业联系人冯春：13981823592', 13, '2022-07-05');
INSERT INTO `cmc_project_change` VALUES ('1648881414410338405', '1648881414410338305', '新增料场0.7平方公里1:2000地形图测绘和三维地形面制作。', 13, '2022-05-11');
INSERT INTO `cmc_project_change` VALUES ('1648881414641025025', '1648881414641025025', '新增84km1:1000断面测量工作，用户方联系人：刘家富，电话：13548009012，工期：视现场情况尽快实施，11月底前完成。', 13, '2021-11-08');
INSERT INTO `cmc_project_change` VALUES ('1648881414657802242', '1648881414657802242', '新增龚嘴渣场1/1000地形图测量（含水下地形）,（业主严锦林，电话13881352845）', 13, '2021-10-12');
INSERT INTO `cmc_project_change` VALUES ('1648881414674579458', '1648881414674579458', '新增坐标转换工作1项，图纸已交项目管理部，转换工作量及时报我部。', 13, '2021-10-12');
INSERT INTO `cmc_project_change` VALUES ('1648881414674579558', '1648881414674579458', '新增小河坝居民点供水1:500补测0.32平方公里，安靖供水点1:500地形图0.013平方公里，安靖供水站取水口1:500地形图0.112平方公里', 13, '2021-09-30');
INSERT INTO `cmc_project_change` VALUES ('1648881414976569346', '1648881414976569346', '1:2000范围的地形图改为地形地类图，工期暂定于8月中旬，移民专业联系人冯春：13981823592', 13, '2022-07-05');
INSERT INTO `cmc_project_change` VALUES ('1648881414976569446', '1648881414976569346', '成图范围均需提供三维地形面。', 13, '2021-08-23');
INSERT INTO `cmc_project_change` VALUES ('1648881415047872514', '1648881415047872514', '新增18.5平方公里1:2000地形图测量。', 13, '2021-09-08');
INSERT INTO `cmc_project_change` VALUES ('1648881415047872614', '1648881415047872514', '成图范围均需提供三维地形面。', 13, '2021-08-23');
INSERT INTO `cmc_project_change` VALUES ('1648881415047872714', '1648881415047872514', '淹没区任务取消，新增29平方公里1:5000地形图测量。', 13, '2021-08-23');
INSERT INTO `cmc_project_change` VALUES ('1648881415265976322', '1648881415265976322', '成图范围均需提供三维地形面。', 13, '2021-08-23');
INSERT INTO `cmc_project_change` VALUES ('1648881415429554178', '1648881415429554178', '新增20个特征点放样。', 13, '2021-08-24');
INSERT INTO `cmc_project_change` VALUES ('1648881415458914305', '1648881415458914305', '成图范围均需提供三维地形面。实景三维模型', 13, '2021-08-23');
INSERT INTO `cmc_project_change` VALUES ('1648881415588937730', '1648881415588937730', '2021.6.25增加外业调绘工作，比例尺1：2000，调绘面积68平方千米。', 22, '2021-06-25');
INSERT INTO `cmc_project_change` VALUES ('1648881415832207361', '1648881415832207361', '增加1:2000地形图工作量5.783km²。', 13, '2021-05-25');
INSERT INTO `cmc_project_change` VALUES ('1648881415861567490', '1648881415861567490', '邓家桥1:1000地形图测绘，0.3平方公里，联系人李美蓉，测绘项目负责人李锋。', 20, '2021-05-08');
INSERT INTO `cmc_project_change` VALUES ('1648881416029339649', '1648881416029339649', '绰斯甲干流及支沟河段视频航摄，预计40km，联系人周静13350870068，测绘负责人李锋', 20, '2021-05-08');
INSERT INTO `cmc_project_change` VALUES ('1648881416029339749', '1648881416029339649', '（1）、5#渣场1:500地形图测量及断面测量，工作量根据实际计，联系人：何富刚；（2）、浦西乡上游场地1:500水下地形图测绘及堤防上下高程测量，联系人：罗鹏，18161377583', 20, '2021-04-23');
INSERT INTO `cmc_project_change` VALUES ('1648881416029339849', '1648881416029339649', '浦西乡上游场地1:500地形图测绘，预计0.2平方公里，李锋完成。', 20, '2021-04-20');
INSERT INTO `cmc_project_change` VALUES ('1648881416163557378', '1648881416163557378', '八窝龙施工场地1:500地形图补测,0.26平方公里', 20, '2021-03-22');
INSERT INTO `cmc_project_change` VALUES ('1648881416260026369', '1648881416260026369', '三道桥地勘钻孔放样测量；水桥村1:500地形图补测，公路外侧测至水边。联系人城乡分公司：张波13708019335', 20, '2021-06-01');
INSERT INTO `cmc_project_change` VALUES ('1648881416260026469', '1648881416260026369', '1、康定市牛棚子村1:1000地形图测绘，预计0.3km²，五等GNSS测量3点，联系人：张波，13708019335； 2、康定市三道桥村1:1000地形图补测，预计1.2km²，引水线路1:2000地形图测绘，预计1.4平方，联系人：张波，13708019335', 20, '2021-04-23');
INSERT INTO `cmc_project_change` VALUES ('1648881416260026569', '1648881416260026369', '1、康定市三道桥村1:1000地形图测绘，面积约0.93平方公里； 2、康定市水桥村1:500地形图测绘，面积约0.5平方公里； 3、康定市水桥村引水线路1:1000地形图测绘，面积约0.8平方公里。', 20, '2021-03-29');
INSERT INTO `cmc_project_change` VALUES ('1648881416310358017', '1648881416310358017', '新联料场供水补测约0.18平方公里', 13, '2021-09-01');
INSERT INTO `cmc_project_change` VALUES ('1648881416310358117', '1648881416310358017', '新联料场坐标转换（转成1954北京坐标系），联系人城乡分公司：张波13708019335', 20, '2021-06-01');
INSERT INTO `cmc_project_change` VALUES ('1648881416360689665', '1648881416360689665', '名称变更为：瀑布沟水电站武警营房扩建等1:500地形图，其它不变；联系人增加地质工程院钟果：13558898894', 20, '2021-03-03');
INSERT INTO `cmc_project_change` VALUES ('1648881416394244098', '1648881416394244098', '双江口双柏树钻孔放样测量人工配合16人天。（后补）', 13, '2021-09-18');
INSERT INTO `cmc_project_change` VALUES ('1648881416499101698', '1648881416499101698', '引水线路1:1000地形图测绘，引水水源需要把沟和路测到，两侧再多测个10M', 20, '2021-01-25');
INSERT INTO `cmc_project_change` VALUES ('1648881416792702977', '1648881416792702977', '多吉坝址三维地形面制作约2.9平方公里。', 13, '2021-06-22');
INSERT INTO `cmc_project_change` VALUES ('1648881417723838466', '1648881417723838466', '雾化区1:1000地形图和三维地形面制作，工作量由1.0km²变更为1.9km²，其他不变。', 20, '2020-11-12');
INSERT INTO `cmc_project_change` VALUES ('1648881417736421378', '1648881417736421378', '依生沟渣场1:1000地形图测绘，面积约1.23km²，联系人：刘放 13980409051', 20, '2020-11-25');
INSERT INTO `cmc_project_change` VALUES ('1648881417753198593', '1648881417753198593', '双江口征地红线图ARCGIS构面，20201106安排，20201109提交成果。联系人：罗鹏，13408698670', 20, '2020-11-09');
INSERT INTO `cmc_project_change` VALUES ('1648881417753198693', '1648881417753198593', '增加：大石凼场平和斯米勒俄场平2幅图坐标转换，城乡发展分公司联系人罗鹏：13408698670；完成时间：2020年11月9日。', 20, '2020-11-05');
INSERT INTO `cmc_project_change` VALUES ('1648881417782558721', '1648881417782558721', '两河口水电站车渡码头1:1000地形图测绘（3块：右岸车渡码头、左岸车渡码头、左岸料场），面积约 2.08km²，完成时间2020.11.20。城乡分公司联系人：王增福 13281233292', 20, '2020-11-05');
INSERT INTO `cmc_project_change` VALUES ('1648881418197794818', '1648881418197794818', '闸坝左右岸及闸坝本身1:500地形图测绘，范围：左岸从上游0-200～下游0+400，右岸从上游0-200～下游0+400。右岸增加100M范围', 20, '2020-09-08');
INSERT INTO `cmc_project_change` VALUES ('1648881418214572034', '1648881418214572034', '汉源县万里工业园区白岩河堤防修复工程新增测量及初步设计补测要求 1、海子河坝基础重建段起点、终点及中间桥下位置处补测已损毁河堤基础断面和高程，现有完好部分河堤基础高程，详见附图。 2、新增固床坝处现状河床及两岸高程，若有挡墙，应测出其断面，固床坝位置见附图。 3、工程河段所有现有固床坝在平面图中表示，并测量其高程及断面。 4、附图中基础加固段应测出其河底高程，并提供各段典型断面。 5、增测3个范围（范围内若有已损毁堤防应表示，并测完好段典型断面）、29个大断面，见kmL文件。 联系人，任萧 13628025974', 20, '2020-12-31');
INSERT INTO `cmc_project_change` VALUES ('1648881418256515073', '1648881418256515073', '增加1:500水下地形图测绘，范围：现有设计坝址上游3km，下游测至水上范围结束的地方，水下地形最好能跟刚测的水上的地形接边。左岸水渠部分测至小周村桥的位置。完成时间尽快，目前能测多少算多少？测不到部分等汛期过后再去补测。', 20, '2020-09-16');
INSERT INTO `cmc_project_change` VALUES ('1648881418327818241', '1648881418327818241', '双江口水电站足木足集镇施工用地范围国家2000坐标系测量，161点。双江口测量中心李锋完成', 20, '2020-09-30');
INSERT INTO `cmc_project_change` VALUES ('1648881418327818341', '1648881418327818241', '孔龙集镇场地平整布置图坐标转换，转换成国家2000大地坐标，完成后工作量尽快报给我，城乡发展分公司联系人金勇：13550046031', 20, '2020-07-14');
INSERT INTO `cmc_project_change` VALUES ('1648881418369761282', '1648881418369761282', '2020年6月29日，项目临时被甲方叫停。', 15, '2020-06-30');
INSERT INTO `cmc_project_change` VALUES ('1648881418441064449', '1648881418441064449', '坝区开挖竣工1:1000地形图修补测，开挖竣工1:1000三维地形面制作。现场联系人：马行东13795668566，资料提交时间7月29日', 20, '2020-06-29');
INSERT INTO `cmc_project_change` VALUES ('1648881418441064549', '1648881418441064449', '增加两项工作内容： 1、阿斯布土料场三维地形面制作； 2、当卡料场三维地形面制作。完成时间6月19日前。', 20, '2020-06-09');
INSERT INTO `cmc_project_change` VALUES ('1648881418441064649', '1648881418441064449', '阿斯布土料场1:1000断面测量，变更为阿斯布土料场、当卡料场1:1000地形图修补测，地形变化范围进行修补测。预计工作量', 20, '2020-06-09');
INSERT INTO `cmc_project_change` VALUES ('1648881418453647362', '1648881418453647362', '完成时间变更为6月15日，如果确实无法完成，请提前与用户协商。', 20, '2020-06-09');
INSERT INTO `cmc_project_change` VALUES ('1648881418483007490', '1648881418483007490', '数据采集 100km²；激光点云数据处理、分类 100km²；正射影像图制作 100km²；1:2000地形图制作 75km²。', 20, '2020-08-03');
INSERT INTO `cmc_project_change` VALUES ('1648881418558504961', '1648881418558504961', '新增测图范围正射影像制作，面积约53平方公里。', 13, '2022-07-19');
INSERT INTO `cmc_project_change` VALUES ('1648881418592059394', '1648881418592059394', '1:1000水下地形图测绘，1:1000横断面测量，3km（11条），断面基点22点，汛期结束后视现场情况开展，完成时间预计11月30日；图纸及坐标点坐标转换，465点，7月31日提交资料', 20, '2020-06-23');
INSERT INTO `cmc_project_change` VALUES ('1648881418696916993', '1648881418696916993', '料场1:1000地形图测绘，预计0.183km²；天然气管道测量（1:1000），预计0.8km；参考点测量13点', 20, '2020-04-16');
INSERT INTO `cmc_project_change` VALUES ('1648881418764025857', '1648881418764025857', '曾家沟1:1000地形图测绘，在原曾家沟1:5000地形图范围内测1:1000，工作量以实际完成为准。', 20, '2021-02-23');
INSERT INTO `cmc_project_change` VALUES ('1648881418764025957', '1648881418764025857', '老鹰岩一级水电站曾家沟曾家沟泥石流1:5000地形图测绘，8.3 km²，完成时间：尽快完成。项目部联系人：刘云鹏，15928752650', 20, '2020-11-09');
INSERT INTO `cmc_project_change` VALUES ('1648881419086987266', '1648881419086987266', '汉源湖景观坝（一期）料场（一）或料场（二）1:2000地形地类图测绘，或者按地方（例如某某料场）。联系人城乡发展分公司梁炎13908183297', 20, '2020-01-08');
INSERT INTO `cmc_project_change` VALUES ('1648881419128930305', '1648881419128930305', '项目新增2块1:2000 DOM制作，面积3.5平方公里', 20, '2019-12-04');
INSERT INTO `cmc_project_change` VALUES ('1648881419313479682', '1648881419313479682', '铜街子水电站枢纽1:200地形图测绘，根据用户要求进行测量。预计完成时间1月15日。项目部联系人：向涛：87399920、18581885020；业主现场联系人：郑有全：18227866606。到现场后，及时与业主联系人联系。', 20, '2020-01-06');
INSERT INTO `cmc_project_change` VALUES ('1648881421276413954', '1648881421276413954', '1、汪子岩水库1:2000数字线划专用图（DLG）、数字高程模型（DEM）、正射影像图（DOM）制作，1.12 km²； 2、马桥河1:2000数字线划专用图（DLG）、数字高程模型（DEM）、正射影像图（DOM）制作，2.66 km²； 3、磨刀岩河1:2000数字线划专用图（DLG）、数字高程模型（DEM）、正射影像图（DOM）制作，2.64 km²； 4、中嘴河1:2000数字线划专用图（DLG）、数字高程模型（DEM）、正射影像图（DOM）制作，1.9 km²； 5、大佛岩水库1:2000数字线划专用图（DLG）、数字高程模型（DEM）、正射影像图（DOM）制作，0.29 km²； 6、石柱房水库右岸支流1:2000数字线划专用图（DLG）、数字高程模型（DEM）、正射影像图（DOM）制作，0.6 km²； 7、龙兴寺水库1:2000数字线划专用图（DLG）、数字高程模型（DEM）、正射影像图（DOM）制作，0.74 km²； 8、泸江水库1:2000数字线划专用图（DLG）、数字高程模型（DEM）、正射影像图（DOM）制作，0.85 km²； 9、汪子岩水库、马桥河、磨刀岩河、中嘴河、大佛岩水库、石柱房水库右岸支流、龙兴寺水库、泸江水库告示牌制作与安装，18点/座； 10、汪子岩水库、马桥河、磨刀岩河、中嘴河、大佛岩水库、石柱房水库右岸支流、龙兴寺水库、泸江水库、双河', 20, '2020-01-07');
INSERT INTO `cmc_project_change` VALUES ('1648881410631270452', '1648881410631270452', 'F04机位1:500地形图测绘,联系人：肖广平18819807130', 20, '2024-07-11');

-- ----------------------------
-- 71、cmc项目分包合同表
-- ----------------------------
drop table if exists `cmc_project_sub_contract`;
create table `cmc_project_sub_contract`  (
  `project_id` 				char(19)  	not null 	comment '项目id',
  `sub_contract_id` 			char(19)  	not null 	comment '分包合同id',
  primary key (`project_id`,`sub_contract_id`)
) engine = innodb comment = 'cmc项目分包合同表';

-- ----------------------------
-- 初始化-项目分包合同表数据
-- ----------------------------
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410555772930', '1648881410663703821');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410610298882', '1648881410215184886');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410610298882', '1648881410777634674');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270404', '1648881410433439953');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270404', '1648881410680238227');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270406', '1648881410627928716');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270407', '1648881410581753540');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270407', '1648881410679439336');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270409', '1648881410765270457');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270412', '1648881410225111298');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270412', '1648881410879854740');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270415', '1648881410323314298');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270416', '1648881410318685427');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270418', '1648881410636844411');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270419', '1648881410333912814');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270420', '1648881410516860057');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270423', '1648881410755664346');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270432', '1648881410209174821');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270451', '1648881410586820322');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270460', '1648881410396262814');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270462', '1648881410401840030');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410643853314', '1648881410440617772');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410643853314', '1648881410858613729');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410643853314', '1648881410933065606');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410677407746', '1648881410393834485');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410694184962', '1648881410426851877');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410727739393', '1648881410910860364');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410761293825', '1648881410260425304');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410761293825', '1648881410454874146');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410778071042', '1648881410237375744');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410790653953', '1648881410237375744');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410832596993', '1648881410649310896');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410849374209', '1648881410153194108');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410866151425', '1648881410483748441');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410866151425', '1648881410887590986');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410912288769', '1648881410720797331');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410929065985', '1648881410341676430');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410929065985', '1648881410720797331');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410945843202', '1648881410341676430');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410962620417', '1648881410143268568');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411105226753', '1648881410720797331');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411138781187', '1648881410816118054');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411201695745', '1648881410741372933');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411218472961', '1648881410434592922');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411252027394', '1648881410179264712');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411252027394', '1648881410662002463');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491331', '1648881410388609487');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491331', '1648881410729048582');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491331', '1648881410755664346');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491332', '1648881410755664346');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491333', '1648881410755664346');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491334', '1648881410437200822');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491336', '1648881410117060341');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491338', '1648881410933065606');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491349', '1648881410457130939');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491354', '1648881410246455365');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491359', '1648881410520082243');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491371', '1648881410956330359');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491372', '1648881410933065606');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491372', '1648881410938762461');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491374', '1648881410246455365');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491377', '1648881410289671552');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491378', '1648881410246455365');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491379', '1648881410246455365');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491382', '1648881410278513346');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491382', '1648881410956330359');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491383', '1648881410791104846');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411499491387', '1648881410858613729');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411688235010', '1648881410820859204');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411705012226', '1648881410431581880');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411705012226', '1648881410674949079');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411751149569', '1648881410910860364');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411788898305', '1648881410730589727');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411906338818', '1648881410205514574');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881411906338818', '1648881410798634855');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881412040556545', '1648881410309947719');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881412384489473', '1648881410441846483');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881412384489473', '1648881410465032714');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881412384489473', '1648881410661612061');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881412384489473', '1648881410801345841');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881412514512898', '1648881410209668823');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881412535484418', '1648881410305038254');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881412715839489', '1648881410816118054');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881412845862913', '1648881410816118054');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881413210767362', '1648881410816118054');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881414410338305', '1648881410910860364');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881414582304770', '1648881410910860364');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881415815430146', '1648881410637353388');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881415815430146', '1648881410832673854');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881418239737858', '1648881410116627073');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881418881466369', '1648881410716199418');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881419607080962', '1648881410358908820');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881419619663874', '1648881410100421168');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881419619663874', '1648881410320071921');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881419619663874', '1648881410830963895');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270462', '1648881410465949634');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881412040556545', '1648881410401840031');
INSERT INTO `cmc_project_sub_contract` VALUES ('1648881410631270404', '1648881410401840036');

-- ----------------------------
-- 72、cmc安全汇报表
-- ----------------------------
drop table if exists `cmc_safe_report`;
create table `cmc_safe_report`  (
  `safe_report_id` 	int not null auto_increment		comment '安全报告id',
  `project_id` 		char(19) 		default null 	comment '项目id',
  `report_date` 	date 			default null 	comment '报告日期',
  `member` 			varchar(100) 	default null 	comment '公司人员',
  `employee` 		varchar(255) 	default null 	comment '临时人员',
  `content` 		varchar(255) 	default null 	comment '安全报告',
  `reporter` 		bigint 			default null 	comment '填报人',
  primary key (`safe_report_id`)
) engine = innodb comment = 'cmc安全汇报表';

-- ----------------------------
-- 初始化-安全汇报表数据
-- ----------------------------

-- ----------------------------
-- 73、cmc领导分管表
-- ----------------------------
drop table if exists `cmc_manage_dept`;
create table `cmc_manage_dept`  (
  `user_id` 	bigint 		not null comment '分管领导id',
  `dept_id` 	varchar(20) default null comment '分管部门id',
  `party_a_id`	varchar(25) default null comment '院内对接单位',
  primary key (`user_id`)
) engine = innodb comment = 'cmc领导分管表';

-- ----------------------------
-- 初始化-领导分管表数据
-- ----------------------------
INSERT INTO `cmc_manage_dept` VALUES (2, '104,106,113', null);
INSERT INTO `cmc_manage_dept` VALUES (7, '104,109', null);
INSERT INTO `cmc_manage_dept` VALUES (9, '108,109', null);
INSERT INTO `cmc_manage_dept` VALUES (10, '111,115', '0231,0232,0233,0234');
INSERT INTO `cmc_manage_dept` VALUES (11, '107,110,116', '0228,0236');
INSERT INTO `cmc_manage_dept` VALUES (13, '105,112,113,114', '0227,0231,0232,0233,0237');
INSERT INTO `cmc_manage_dept` VALUES (14, '106', null);
INSERT INTO `cmc_manage_dept` VALUES (15, '105,117,118', '0238,0239');

SET NAMES utf8mb4;
SET FOREIGN_KEY_CHECKS = 0;

-- ----------------------------
-- Table structure for ACT_APP_APPDEF
-- ----------------------------
DROP TABLE IF EXISTS `ACT_APP_APPDEF`;
CREATE TABLE `ACT_APP_APPDEF` (
                                  `ID_` varchar(255) NOT NULL,
                                  `REV_` int(11) NOT NULL,
                                  `NAME_` varchar(255) DEFAULT NULL,
                                  `KEY_` varchar(255) NOT NULL,
                                  `VERSION_` int(11) NOT NULL,
                                  `CATEGORY_` varchar(255) DEFAULT NULL,
                                  `DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                  `RESOURCE_NAME_` varchar(4000) DEFAULT NULL,
                                  `DESCRIPTION_` varchar(4000) DEFAULT NULL,
                                  `TENANT_ID_` varchar(255) DEFAULT '',
                                  PRIMARY KEY (`ID_`),
                                  UNIQUE KEY `ACT_IDX_APP_DEF_UNIQ` (`KEY_`,`VERSION_`,`TENANT_ID_`),
                                  KEY `ACT_IDX_APP_DEF_DPLY` (`DEPLOYMENT_ID_`),
                                  CONSTRAINT `ACT_FK_APP_DEF_DPLY` FOREIGN KEY (`DEPLOYMENT_ID_`) REFERENCES `ACT_APP_DEPLOYMENT` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_APP_APPDEF
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_APP_DATABASECHANGELOG
-- ----------------------------
DROP TABLE IF EXISTS `ACT_APP_DATABASECHANGELOG`;
CREATE TABLE `ACT_APP_DATABASECHANGELOG` (
                                             `ID` varchar(255) NOT NULL,
                                             `AUTHOR` varchar(255) NOT NULL,
                                             `FILENAME` varchar(255) NOT NULL,
                                             `DATEEXECUTED` datetime NOT NULL,
                                             `ORDEREXECUTED` int(11) NOT NULL,
                                             `EXECTYPE` varchar(10) NOT NULL,
                                             `MD5SUM` varchar(35) DEFAULT NULL,
                                             `DESCRIPTION` varchar(255) DEFAULT NULL,
                                             `COMMENTS` varchar(255) DEFAULT NULL,
                                             `TAG` varchar(255) DEFAULT NULL,
                                             `LIQUIBASE` varchar(20) DEFAULT NULL,
                                             `CONTEXTS` varchar(255) DEFAULT NULL,
                                             `LABELS` varchar(255) DEFAULT NULL,
                                             `DEPLOYMENT_ID` varchar(10) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_APP_DATABASECHANGELOG
-- ----------------------------
BEGIN;
INSERT INTO `ACT_APP_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('1', 'flowable', 'org/flowable/app/db/liquibase/flowable-app-db-changelog.xml', '2023-09-14 11:05:29', 1, 'EXECUTED', '8:496fc778bdf2ab13f2e1926d0e63e0a2', 'createTable tableName=ACT_APP_DEPLOYMENT; createTable tableName=ACT_APP_DEPLOYMENT_RESOURCE; addForeignKeyConstraint baseTableName=ACT_APP_DEPLOYMENT_RESOURCE, constraintName=ACT_FK_APP_RSRC_DPL, referencedTableName=ACT_APP_DEPLOYMENT; createIndex...', '', NULL, '4.3.5', NULL, NULL, '4660729443');
INSERT INTO `ACT_APP_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('2', 'flowable', 'org/flowable/app/db/liquibase/flowable-app-db-changelog.xml', '2023-09-14 11:05:29', 2, 'EXECUTED', '8:ccea9ebfb6c1f8367ca4dd473fcbb7db', 'modifyDataType columnName=DEPLOY_TIME_, tableName=ACT_APP_DEPLOYMENT', '', NULL, '4.3.5', NULL, NULL, '4660729443');
INSERT INTO `ACT_APP_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('3', 'flowable', 'org/flowable/app/db/liquibase/flowable-app-db-changelog.xml', '2023-09-14 11:05:29', 3, 'EXECUTED', '8:f1f8aff320aade831944ebad24355f3d', 'createIndex indexName=ACT_IDX_APP_DEF_UNIQ, tableName=ACT_APP_APPDEF', '', NULL, '4.3.5', NULL, NULL, '4660729443');
COMMIT;

-- ----------------------------
-- Table structure for ACT_APP_DATABASECHANGELOGLOCK
-- ----------------------------
DROP TABLE IF EXISTS `ACT_APP_DATABASECHANGELOGLOCK`;
CREATE TABLE `ACT_APP_DATABASECHANGELOGLOCK` (
                                                 `ID` int(11) NOT NULL,
                                                 `LOCKED` bit(1) NOT NULL,
                                                 `LOCKGRANTED` datetime DEFAULT NULL,
                                                 `LOCKEDBY` varchar(255) DEFAULT NULL,
                                                 PRIMARY KEY (`ID`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_APP_DATABASECHANGELOGLOCK
-- ----------------------------
BEGIN;
INSERT INTO `ACT_APP_DATABASECHANGELOGLOCK` (`ID`, `LOCKED`, `LOCKGRANTED`, `LOCKEDBY`) VALUES (1, b'0', NULL, NULL);
COMMIT;

-- ----------------------------
-- Table structure for ACT_APP_DEPLOYMENT
-- ----------------------------
DROP TABLE IF EXISTS `ACT_APP_DEPLOYMENT`;
CREATE TABLE `ACT_APP_DEPLOYMENT` (
                                      `ID_` varchar(255) NOT NULL,
                                      `NAME_` varchar(255) DEFAULT NULL,
                                      `CATEGORY_` varchar(255) DEFAULT NULL,
                                      `KEY_` varchar(255) DEFAULT NULL,
                                      `DEPLOY_TIME_` datetime(3) DEFAULT NULL,
                                      `TENANT_ID_` varchar(255) DEFAULT '',
                                      PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_APP_DEPLOYMENT
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_APP_DEPLOYMENT_RESOURCE
-- ----------------------------
DROP TABLE IF EXISTS `ACT_APP_DEPLOYMENT_RESOURCE`;
CREATE TABLE `ACT_APP_DEPLOYMENT_RESOURCE` (
                                               `ID_` varchar(255) NOT NULL,
                                               `NAME_` varchar(255) DEFAULT NULL,
                                               `DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                               `RESOURCE_BYTES_` longblob,
                                               PRIMARY KEY (`ID_`),
                                               KEY `ACT_IDX_APP_RSRC_DPL` (`DEPLOYMENT_ID_`),
                                               CONSTRAINT `ACT_FK_APP_RSRC_DPL` FOREIGN KEY (`DEPLOYMENT_ID_`) REFERENCES `ACT_APP_DEPLOYMENT` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_APP_DEPLOYMENT_RESOURCE
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_CMMN_CASEDEF
-- ----------------------------
DROP TABLE IF EXISTS `ACT_CMMN_CASEDEF`;
CREATE TABLE `ACT_CMMN_CASEDEF` (
                                    `ID_` varchar(255) NOT NULL,
                                    `REV_` int(11) NOT NULL,
                                    `NAME_` varchar(255) DEFAULT NULL,
                                    `KEY_` varchar(255) NOT NULL,
                                    `VERSION_` int(11) NOT NULL,
                                    `CATEGORY_` varchar(255) DEFAULT NULL,
                                    `DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                    `RESOURCE_NAME_` varchar(4000) DEFAULT NULL,
                                    `DESCRIPTION_` varchar(4000) DEFAULT NULL,
                                    `HAS_GRAPHICAL_NOTATION_` bit(1) DEFAULT NULL,
                                    `TENANT_ID_` varchar(255) DEFAULT '',
                                    `DGRM_RESOURCE_NAME_` varchar(4000) DEFAULT NULL,
                                    `HAS_START_FORM_KEY_` bit(1) DEFAULT NULL,
                                    PRIMARY KEY (`ID_`),
                                    UNIQUE KEY `ACT_IDX_CASE_DEF_UNIQ` (`KEY_`,`VERSION_`,`TENANT_ID_`),
                                    KEY `ACT_IDX_CASE_DEF_DPLY` (`DEPLOYMENT_ID_`),
                                    CONSTRAINT `ACT_FK_CASE_DEF_DPLY` FOREIGN KEY (`DEPLOYMENT_ID_`) REFERENCES `ACT_CMMN_DEPLOYMENT` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_CMMN_CASEDEF
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_CMMN_DATABASECHANGELOG
-- ----------------------------
DROP TABLE IF EXISTS `ACT_CMMN_DATABASECHANGELOG`;
CREATE TABLE `ACT_CMMN_DATABASECHANGELOG` (
                                              `ID` varchar(255) NOT NULL,
                                              `AUTHOR` varchar(255) NOT NULL,
                                              `FILENAME` varchar(255) NOT NULL,
                                              `DATEEXECUTED` datetime NOT NULL,
                                              `ORDEREXECUTED` int(11) NOT NULL,
                                              `EXECTYPE` varchar(10) NOT NULL,
                                              `MD5SUM` varchar(35) DEFAULT NULL,
                                              `DESCRIPTION` varchar(255) DEFAULT NULL,
                                              `COMMENTS` varchar(255) DEFAULT NULL,
                                              `TAG` varchar(255) DEFAULT NULL,
                                              `LIQUIBASE` varchar(20) DEFAULT NULL,
                                              `CONTEXTS` varchar(255) DEFAULT NULL,
                                              `LABELS` varchar(255) DEFAULT NULL,
                                              `DEPLOYMENT_ID` varchar(10) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_CMMN_DATABASECHANGELOG
-- ----------------------------
BEGIN;
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('1', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:27', 1, 'EXECUTED', '8:8b4b922d90b05ff27483abefc9597aa6', 'createTable tableName=ACT_CMMN_DEPLOYMENT; createTable tableName=ACT_CMMN_DEPLOYMENT_RESOURCE; addForeignKeyConstraint baseTableName=ACT_CMMN_DEPLOYMENT_RESOURCE, constraintName=ACT_FK_CMMN_RSRC_DPL, referencedTableName=ACT_CMMN_DEPLOYMENT; create...', '', NULL, '4.3.5', NULL, NULL, '4660727511');
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('2', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:28', 2, 'EXECUTED', '8:65e39b3d385706bb261cbeffe7533cbe', 'addColumn tableName=ACT_CMMN_CASEDEF; addColumn tableName=ACT_CMMN_DEPLOYMENT_RESOURCE; addColumn tableName=ACT_CMMN_RU_CASE_INST; addColumn tableName=ACT_CMMN_RU_PLAN_ITEM_INST', '', NULL, '4.3.5', NULL, NULL, '4660727511');
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('3', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:28', 3, 'EXECUTED', '8:c01f6e802b49436b4489040da3012359', 'addColumn tableName=ACT_CMMN_RU_PLAN_ITEM_INST; addColumn tableName=ACT_CMMN_RU_CASE_INST; createIndex indexName=ACT_IDX_PLAN_ITEM_STAGE_INST, tableName=ACT_CMMN_RU_PLAN_ITEM_INST; addColumn tableName=ACT_CMMN_RU_PLAN_ITEM_INST; addColumn tableNam...', '', NULL, '4.3.5', NULL, NULL, '4660727511');
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('4', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:28', 4, 'EXECUTED', '8:e40d29cb79345b7fb5afd38a7f0ba8fc', 'createTable tableName=ACT_CMMN_HI_PLAN_ITEM_INST; addColumn tableName=ACT_CMMN_RU_MIL_INST; addColumn tableName=ACT_CMMN_HI_MIL_INST', '', NULL, '4.3.5', NULL, NULL, '4660727511');
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('5', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:28', 5, 'EXECUTED', '8:70349de472f87368dcdec971a10311a0', 'modifyDataType columnName=DEPLOY_TIME_, tableName=ACT_CMMN_DEPLOYMENT; modifyDataType columnName=START_TIME_, tableName=ACT_CMMN_RU_CASE_INST; modifyDataType columnName=START_TIME_, tableName=ACT_CMMN_RU_PLAN_ITEM_INST; modifyDataType columnName=T...', '', NULL, '4.3.5', NULL, NULL, '4660727511');
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('6', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:28', 6, 'EXECUTED', '8:10e82e26a7fee94c32a92099c059c18c', 'createIndex indexName=ACT_IDX_CASE_DEF_UNIQ, tableName=ACT_CMMN_CASEDEF', '', NULL, '4.3.5', NULL, NULL, '4660727511');
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('7', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:28', 7, 'EXECUTED', '8:530bc81a1e30618ccf4a2da1f7c6c043', 'renameColumn newColumnName=CREATE_TIME_, oldColumnName=START_TIME_, tableName=ACT_CMMN_RU_PLAN_ITEM_INST; renameColumn newColumnName=CREATE_TIME_, oldColumnName=CREATED_TIME_, tableName=ACT_CMMN_HI_PLAN_ITEM_INST; addColumn tableName=ACT_CMMN_RU_P...', '', NULL, '4.3.5', NULL, NULL, '4660727511');
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('8', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:28', 8, 'EXECUTED', '8:e8c2eb1ce28bc301efe07e0e29757781', 'addColumn tableName=ACT_CMMN_HI_PLAN_ITEM_INST', '', NULL, '4.3.5', NULL, NULL, '4660727511');
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('9', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:28', 9, 'EXECUTED', '8:4cb4782b9bdec5ced2a64c525aa7b3a0', 'addColumn tableName=ACT_CMMN_RU_PLAN_ITEM_INST; addColumn tableName=ACT_CMMN_HI_PLAN_ITEM_INST', '', NULL, '4.3.5', NULL, NULL, '4660727511');
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('10', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:28', 10, 'EXECUTED', '8:341c16be247f5d17badc9809da8691f9', 'addColumn tableName=ACT_CMMN_RU_CASE_INST; addColumn tableName=ACT_CMMN_RU_CASE_INST; createIndex indexName=ACT_IDX_CASE_INST_REF_ID_, tableName=ACT_CMMN_RU_CASE_INST; addColumn tableName=ACT_CMMN_HI_CASE_INST; addColumn tableName=ACT_CMMN_HI_CASE...', '', NULL, '4.3.5', NULL, NULL, '4660727511');
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('11', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:28', 11, 'EXECUTED', '8:d7c4da9276bcfffbfb0ebfb25e3f7b05', 'addColumn tableName=ACT_CMMN_RU_PLAN_ITEM_INST; addColumn tableName=ACT_CMMN_HI_PLAN_ITEM_INST', '', NULL, '4.3.5', NULL, NULL, '4660727511');
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('12', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:28', 12, 'EXECUTED', '8:adf4ecc45f2aa9a44a5626b02e1d6f98', 'addColumn tableName=ACT_CMMN_RU_CASE_INST', '', NULL, '4.3.5', NULL, NULL, '4660727511');
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('13', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:28', 13, 'EXECUTED', '8:7550626f964ab5518464709408333ec1', 'addColumn tableName=ACT_CMMN_RU_PLAN_ITEM_INST; addColumn tableName=ACT_CMMN_HI_PLAN_ITEM_INST', '', NULL, '4.3.5', NULL, NULL, '4660727511');
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('14', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:28', 14, 'EXECUTED', '8:086b40b3a05596dcc8a8d7479922d494', 'addColumn tableName=ACT_CMMN_RU_CASE_INST; addColumn tableName=ACT_CMMN_HI_CASE_INST', '', NULL, '4.3.5', NULL, NULL, '4660727511');
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('16', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:28', 15, 'EXECUTED', '8:a697a222ddd99dd15b36516a252f1c63', 'addColumn tableName=ACT_CMMN_RU_CASE_INST; addColumn tableName=ACT_CMMN_HI_CASE_INST', '', NULL, '4.3.5', NULL, NULL, '4660727511');
INSERT INTO `ACT_CMMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('17', 'flowable', 'org/flowable/cmmn/db/liquibase/flowable-cmmn-db-changelog.xml', '2023-09-14 11:05:28', 16, 'EXECUTED', '8:d3706c5813a9b97fd2a59d12a9523946', 'createIndex indexName=ACT_IDX_HI_CASE_INST_END, tableName=ACT_CMMN_HI_CASE_INST', '', NULL, '4.3.5', NULL, NULL, '4660727511');
COMMIT;

-- ----------------------------
-- Table structure for ACT_CMMN_DATABASECHANGELOGLOCK
-- ----------------------------
DROP TABLE IF EXISTS `ACT_CMMN_DATABASECHANGELOGLOCK`;
CREATE TABLE `ACT_CMMN_DATABASECHANGELOGLOCK` (
                                                  `ID` int(11) NOT NULL,
                                                  `LOCKED` bit(1) NOT NULL,
                                                  `LOCKGRANTED` datetime DEFAULT NULL,
                                                  `LOCKEDBY` varchar(255) DEFAULT NULL,
                                                  PRIMARY KEY (`ID`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_CMMN_DATABASECHANGELOGLOCK
-- ----------------------------
BEGIN;
INSERT INTO `ACT_CMMN_DATABASECHANGELOGLOCK` (`ID`, `LOCKED`, `LOCKGRANTED`, `LOCKEDBY`) VALUES (1, b'0', NULL, NULL);
COMMIT;

-- ----------------------------
-- Table structure for ACT_CMMN_DEPLOYMENT
-- ----------------------------
DROP TABLE IF EXISTS `ACT_CMMN_DEPLOYMENT`;
CREATE TABLE `ACT_CMMN_DEPLOYMENT` (
                                       `ID_` varchar(255) NOT NULL,
                                       `NAME_` varchar(255) DEFAULT NULL,
                                       `CATEGORY_` varchar(255) DEFAULT NULL,
                                       `KEY_` varchar(255) DEFAULT NULL,
                                       `DEPLOY_TIME_` datetime(3) DEFAULT NULL,
                                       `PARENT_DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                       `TENANT_ID_` varchar(255) DEFAULT '',
                                       PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_CMMN_DEPLOYMENT
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_CMMN_DEPLOYMENT_RESOURCE
-- ----------------------------
DROP TABLE IF EXISTS `ACT_CMMN_DEPLOYMENT_RESOURCE`;
CREATE TABLE `ACT_CMMN_DEPLOYMENT_RESOURCE` (
                                                `ID_` varchar(255) NOT NULL,
                                                `NAME_` varchar(255) DEFAULT NULL,
                                                `DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                                `RESOURCE_BYTES_` longblob,
                                                `GENERATED_` bit(1) DEFAULT NULL,
                                                PRIMARY KEY (`ID_`),
                                                KEY `ACT_IDX_CMMN_RSRC_DPL` (`DEPLOYMENT_ID_`),
                                                CONSTRAINT `ACT_FK_CMMN_RSRC_DPL` FOREIGN KEY (`DEPLOYMENT_ID_`) REFERENCES `ACT_CMMN_DEPLOYMENT` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_CMMN_DEPLOYMENT_RESOURCE
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_CMMN_HI_CASE_INST
-- ----------------------------
DROP TABLE IF EXISTS `ACT_CMMN_HI_CASE_INST`;
CREATE TABLE `ACT_CMMN_HI_CASE_INST` (
                                         `ID_` varchar(255) NOT NULL,
                                         `REV_` int(11) NOT NULL,
                                         `BUSINESS_KEY_` varchar(255) DEFAULT NULL,
                                         `NAME_` varchar(255) DEFAULT NULL,
                                         `PARENT_ID_` varchar(255) DEFAULT NULL,
                                         `CASE_DEF_ID_` varchar(255) DEFAULT NULL,
                                         `STATE_` varchar(255) DEFAULT NULL,
                                         `START_TIME_` datetime(3) DEFAULT NULL,
                                         `END_TIME_` datetime(3) DEFAULT NULL,
                                         `START_USER_ID_` varchar(255) DEFAULT NULL,
                                         `CALLBACK_ID_` varchar(255) DEFAULT NULL,
                                         `CALLBACK_TYPE_` varchar(255) DEFAULT NULL,
                                         `TENANT_ID_` varchar(255) DEFAULT '',
                                         `REFERENCE_ID_` varchar(255) DEFAULT NULL,
                                         `REFERENCE_TYPE_` varchar(255) DEFAULT NULL,
                                         `LAST_REACTIVATION_TIME_` datetime(3) DEFAULT NULL,
                                         `LAST_REACTIVATION_USER_ID_` varchar(255) DEFAULT NULL,
                                         `BUSINESS_STATUS_` varchar(255) DEFAULT NULL,
                                         PRIMARY KEY (`ID_`),
                                         KEY `ACT_IDX_HI_CASE_INST_END` (`END_TIME_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_CMMN_HI_CASE_INST
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_CMMN_HI_MIL_INST
-- ----------------------------
DROP TABLE IF EXISTS `ACT_CMMN_HI_MIL_INST`;
CREATE TABLE `ACT_CMMN_HI_MIL_INST` (
                                        `ID_` varchar(255) NOT NULL,
                                        `REV_` int(11) NOT NULL,
                                        `NAME_` varchar(255) NOT NULL,
                                        `TIME_STAMP_` datetime(3) DEFAULT NULL,
                                        `CASE_INST_ID_` varchar(255) NOT NULL,
                                        `CASE_DEF_ID_` varchar(255) NOT NULL,
                                        `ELEMENT_ID_` varchar(255) NOT NULL,
                                        `TENANT_ID_` varchar(255) DEFAULT '',
                                        PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_CMMN_HI_MIL_INST
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_CMMN_HI_PLAN_ITEM_INST
-- ----------------------------
DROP TABLE IF EXISTS `ACT_CMMN_HI_PLAN_ITEM_INST`;
CREATE TABLE `ACT_CMMN_HI_PLAN_ITEM_INST` (
                                              `ID_` varchar(255) NOT NULL,
                                              `REV_` int(11) NOT NULL,
                                              `NAME_` varchar(255) DEFAULT NULL,
                                              `STATE_` varchar(255) DEFAULT NULL,
                                              `CASE_DEF_ID_` varchar(255) DEFAULT NULL,
                                              `CASE_INST_ID_` varchar(255) DEFAULT NULL,
                                              `STAGE_INST_ID_` varchar(255) DEFAULT NULL,
                                              `IS_STAGE_` bit(1) DEFAULT NULL,
                                              `ELEMENT_ID_` varchar(255) DEFAULT NULL,
                                              `ITEM_DEFINITION_ID_` varchar(255) DEFAULT NULL,
                                              `ITEM_DEFINITION_TYPE_` varchar(255) DEFAULT NULL,
                                              `CREATE_TIME_` datetime(3) DEFAULT NULL,
                                              `LAST_AVAILABLE_TIME_` datetime(3) DEFAULT NULL,
                                              `LAST_ENABLED_TIME_` datetime(3) DEFAULT NULL,
                                              `LAST_DISABLED_TIME_` datetime(3) DEFAULT NULL,
                                              `LAST_STARTED_TIME_` datetime(3) DEFAULT NULL,
                                              `LAST_SUSPENDED_TIME_` datetime(3) DEFAULT NULL,
                                              `COMPLETED_TIME_` datetime(3) DEFAULT NULL,
                                              `OCCURRED_TIME_` datetime(3) DEFAULT NULL,
                                              `TERMINATED_TIME_` datetime(3) DEFAULT NULL,
                                              `EXIT_TIME_` datetime(3) DEFAULT NULL,
                                              `ENDED_TIME_` datetime(3) DEFAULT NULL,
                                              `LAST_UPDATED_TIME_` datetime(3) DEFAULT NULL,
                                              `START_USER_ID_` varchar(255) DEFAULT NULL,
                                              `REFERENCE_ID_` varchar(255) DEFAULT NULL,
                                              `REFERENCE_TYPE_` varchar(255) DEFAULT NULL,
                                              `TENANT_ID_` varchar(255) DEFAULT '',
                                              `ENTRY_CRITERION_ID_` varchar(255) DEFAULT NULL,
                                              `EXIT_CRITERION_ID_` varchar(255) DEFAULT NULL,
                                              `SHOW_IN_OVERVIEW_` bit(1) DEFAULT NULL,
                                              `EXTRA_VALUE_` varchar(255) DEFAULT NULL,
                                              `DERIVED_CASE_DEF_ID_` varchar(255) DEFAULT NULL,
                                              `LAST_UNAVAILABLE_TIME_` datetime(3) DEFAULT NULL,
                                              PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_CMMN_HI_PLAN_ITEM_INST
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_CMMN_RU_CASE_INST
-- ----------------------------
DROP TABLE IF EXISTS `ACT_CMMN_RU_CASE_INST`;
CREATE TABLE `ACT_CMMN_RU_CASE_INST` (
                                         `ID_` varchar(255) NOT NULL,
                                         `REV_` int(11) NOT NULL,
                                         `BUSINESS_KEY_` varchar(255) DEFAULT NULL,
                                         `NAME_` varchar(255) DEFAULT NULL,
                                         `PARENT_ID_` varchar(255) DEFAULT NULL,
                                         `CASE_DEF_ID_` varchar(255) DEFAULT NULL,
                                         `STATE_` varchar(255) DEFAULT NULL,
                                         `START_TIME_` datetime(3) DEFAULT NULL,
                                         `START_USER_ID_` varchar(255) DEFAULT NULL,
                                         `CALLBACK_ID_` varchar(255) DEFAULT NULL,
                                         `CALLBACK_TYPE_` varchar(255) DEFAULT NULL,
                                         `TENANT_ID_` varchar(255) DEFAULT '',
                                         `LOCK_TIME_` datetime(3) DEFAULT NULL,
                                         `IS_COMPLETEABLE_` bit(1) DEFAULT NULL,
                                         `REFERENCE_ID_` varchar(255) DEFAULT NULL,
                                         `REFERENCE_TYPE_` varchar(255) DEFAULT NULL,
                                         `LOCK_OWNER_` varchar(255) DEFAULT NULL,
                                         `LAST_REACTIVATION_TIME_` datetime(3) DEFAULT NULL,
                                         `LAST_REACTIVATION_USER_ID_` varchar(255) DEFAULT NULL,
                                         `BUSINESS_STATUS_` varchar(255) DEFAULT NULL,
                                         PRIMARY KEY (`ID_`),
                                         KEY `ACT_IDX_CASE_INST_CASE_DEF` (`CASE_DEF_ID_`),
                                         KEY `ACT_IDX_CASE_INST_PARENT` (`PARENT_ID_`),
                                         KEY `ACT_IDX_CASE_INST_REF_ID_` (`REFERENCE_ID_`),
                                         CONSTRAINT `ACT_FK_CASE_INST_CASE_DEF` FOREIGN KEY (`CASE_DEF_ID_`) REFERENCES `ACT_CMMN_CASEDEF` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_CMMN_RU_CASE_INST
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_CMMN_RU_MIL_INST
-- ----------------------------
DROP TABLE IF EXISTS `ACT_CMMN_RU_MIL_INST`;
CREATE TABLE `ACT_CMMN_RU_MIL_INST` (
                                        `ID_` varchar(255) NOT NULL,
                                        `NAME_` varchar(255) NOT NULL,
                                        `TIME_STAMP_` datetime(3) DEFAULT NULL,
                                        `CASE_INST_ID_` varchar(255) NOT NULL,
                                        `CASE_DEF_ID_` varchar(255) NOT NULL,
                                        `ELEMENT_ID_` varchar(255) NOT NULL,
                                        `TENANT_ID_` varchar(255) DEFAULT '',
                                        PRIMARY KEY (`ID_`),
                                        KEY `ACT_IDX_MIL_CASE_DEF` (`CASE_DEF_ID_`),
                                        KEY `ACT_IDX_MIL_CASE_INST` (`CASE_INST_ID_`),
                                        CONSTRAINT `ACT_FK_MIL_CASE_DEF` FOREIGN KEY (`CASE_DEF_ID_`) REFERENCES `ACT_CMMN_CASEDEF` (`ID_`),
                                        CONSTRAINT `ACT_FK_MIL_CASE_INST` FOREIGN KEY (`CASE_INST_ID_`) REFERENCES `ACT_CMMN_RU_CASE_INST` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_CMMN_RU_MIL_INST
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_CMMN_RU_PLAN_ITEM_INST
-- ----------------------------
DROP TABLE IF EXISTS `ACT_CMMN_RU_PLAN_ITEM_INST`;
CREATE TABLE `ACT_CMMN_RU_PLAN_ITEM_INST` (
                                              `ID_` varchar(255) NOT NULL,
                                              `REV_` int(11) NOT NULL,
                                              `CASE_DEF_ID_` varchar(255) DEFAULT NULL,
                                              `CASE_INST_ID_` varchar(255) DEFAULT NULL,
                                              `STAGE_INST_ID_` varchar(255) DEFAULT NULL,
                                              `IS_STAGE_` bit(1) DEFAULT NULL,
                                              `ELEMENT_ID_` varchar(255) DEFAULT NULL,
                                              `NAME_` varchar(255) DEFAULT NULL,
                                              `STATE_` varchar(255) DEFAULT NULL,
                                              `CREATE_TIME_` datetime(3) DEFAULT NULL,
                                              `START_USER_ID_` varchar(255) DEFAULT NULL,
                                              `REFERENCE_ID_` varchar(255) DEFAULT NULL,
                                              `REFERENCE_TYPE_` varchar(255) DEFAULT NULL,
                                              `TENANT_ID_` varchar(255) DEFAULT '',
                                              `ITEM_DEFINITION_ID_` varchar(255) DEFAULT NULL,
                                              `ITEM_DEFINITION_TYPE_` varchar(255) DEFAULT NULL,
                                              `IS_COMPLETEABLE_` bit(1) DEFAULT NULL,
                                              `IS_COUNT_ENABLED_` bit(1) DEFAULT NULL,
                                              `VAR_COUNT_` int(11) DEFAULT NULL,
                                              `SENTRY_PART_INST_COUNT_` int(11) DEFAULT NULL,
                                              `LAST_AVAILABLE_TIME_` datetime(3) DEFAULT NULL,
                                              `LAST_ENABLED_TIME_` datetime(3) DEFAULT NULL,
                                              `LAST_DISABLED_TIME_` datetime(3) DEFAULT NULL,
                                              `LAST_STARTED_TIME_` datetime(3) DEFAULT NULL,
                                              `LAST_SUSPENDED_TIME_` datetime(3) DEFAULT NULL,
                                              `COMPLETED_TIME_` datetime(3) DEFAULT NULL,
                                              `OCCURRED_TIME_` datetime(3) DEFAULT NULL,
                                              `TERMINATED_TIME_` datetime(3) DEFAULT NULL,
                                              `EXIT_TIME_` datetime(3) DEFAULT NULL,
                                              `ENDED_TIME_` datetime(3) DEFAULT NULL,
                                              `ENTRY_CRITERION_ID_` varchar(255) DEFAULT NULL,
                                              `EXIT_CRITERION_ID_` varchar(255) DEFAULT NULL,
                                              `EXTRA_VALUE_` varchar(255) DEFAULT NULL,
                                              `DERIVED_CASE_DEF_ID_` varchar(255) DEFAULT NULL,
                                              `LAST_UNAVAILABLE_TIME_` datetime(3) DEFAULT NULL,
                                              PRIMARY KEY (`ID_`),
                                              KEY `ACT_IDX_PLAN_ITEM_CASE_DEF` (`CASE_DEF_ID_`),
                                              KEY `ACT_IDX_PLAN_ITEM_CASE_INST` (`CASE_INST_ID_`),
                                              KEY `ACT_IDX_PLAN_ITEM_STAGE_INST` (`STAGE_INST_ID_`),
                                              CONSTRAINT `ACT_FK_PLAN_ITEM_CASE_DEF` FOREIGN KEY (`CASE_DEF_ID_`) REFERENCES `ACT_CMMN_CASEDEF` (`ID_`),
                                              CONSTRAINT `ACT_FK_PLAN_ITEM_CASE_INST` FOREIGN KEY (`CASE_INST_ID_`) REFERENCES `ACT_CMMN_RU_CASE_INST` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_CMMN_RU_PLAN_ITEM_INST
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_CMMN_RU_SENTRY_PART_INST
-- ----------------------------
DROP TABLE IF EXISTS `ACT_CMMN_RU_SENTRY_PART_INST`;
CREATE TABLE `ACT_CMMN_RU_SENTRY_PART_INST` (
                                                `ID_` varchar(255) NOT NULL,
                                                `REV_` int(11) NOT NULL,
                                                `CASE_DEF_ID_` varchar(255) DEFAULT NULL,
                                                `CASE_INST_ID_` varchar(255) DEFAULT NULL,
                                                `PLAN_ITEM_INST_ID_` varchar(255) DEFAULT NULL,
                                                `ON_PART_ID_` varchar(255) DEFAULT NULL,
                                                `IF_PART_ID_` varchar(255) DEFAULT NULL,
                                                `TIME_STAMP_` datetime(3) DEFAULT NULL,
                                                PRIMARY KEY (`ID_`),
                                                KEY `ACT_IDX_SENTRY_CASE_DEF` (`CASE_DEF_ID_`),
                                                KEY `ACT_IDX_SENTRY_CASE_INST` (`CASE_INST_ID_`),
                                                KEY `ACT_IDX_SENTRY_PLAN_ITEM` (`PLAN_ITEM_INST_ID_`),
                                                CONSTRAINT `ACT_FK_SENTRY_CASE_DEF` FOREIGN KEY (`CASE_DEF_ID_`) REFERENCES `ACT_CMMN_CASEDEF` (`ID_`),
                                                CONSTRAINT `ACT_FK_SENTRY_CASE_INST` FOREIGN KEY (`CASE_INST_ID_`) REFERENCES `ACT_CMMN_RU_CASE_INST` (`ID_`),
                                                CONSTRAINT `ACT_FK_SENTRY_PLAN_ITEM` FOREIGN KEY (`PLAN_ITEM_INST_ID_`) REFERENCES `ACT_CMMN_RU_PLAN_ITEM_INST` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_CMMN_RU_SENTRY_PART_INST
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_CO_CONTENT_ITEM
-- ----------------------------
DROP TABLE IF EXISTS `ACT_CO_CONTENT_ITEM`;
CREATE TABLE `ACT_CO_CONTENT_ITEM` (
                                       `ID_` varchar(255) NOT NULL,
                                       `NAME_` varchar(255) NOT NULL,
                                       `MIME_TYPE_` varchar(255) DEFAULT NULL,
                                       `TASK_ID_` varchar(255) DEFAULT NULL,
                                       `PROC_INST_ID_` varchar(255) DEFAULT NULL,
                                       `CONTENT_STORE_ID_` varchar(255) DEFAULT NULL,
                                       `CONTENT_STORE_NAME_` varchar(255) DEFAULT NULL,
                                       `FIELD_` varchar(400) DEFAULT NULL,
                                       `CONTENT_AVAILABLE_` bit(1) DEFAULT b'0',
                                       `CREATED_` timestamp(6) NULL DEFAULT NULL,
                                       `CREATED_BY_` varchar(255) DEFAULT NULL,
                                       `LAST_MODIFIED_` timestamp(6) NULL DEFAULT NULL,
                                       `LAST_MODIFIED_BY_` varchar(255) DEFAULT NULL,
                                       `CONTENT_SIZE_` bigint(20) DEFAULT '0',
                                       `TENANT_ID_` varchar(255) DEFAULT NULL,
                                       `SCOPE_ID_` varchar(255) DEFAULT NULL,
                                       `SCOPE_TYPE_` varchar(255) DEFAULT NULL,
                                       PRIMARY KEY (`ID_`),
                                       KEY `idx_contitem_taskid` (`TASK_ID_`),
                                       KEY `idx_contitem_procid` (`PROC_INST_ID_`),
                                       KEY `idx_contitem_scope` (`SCOPE_ID_`,`SCOPE_TYPE_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_CO_CONTENT_ITEM
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_CO_DATABASECHANGELOG
-- ----------------------------
DROP TABLE IF EXISTS `ACT_CO_DATABASECHANGELOG`;
CREATE TABLE `ACT_CO_DATABASECHANGELOG` (
                                            `ID` varchar(255) NOT NULL,
                                            `AUTHOR` varchar(255) NOT NULL,
                                            `FILENAME` varchar(255) NOT NULL,
                                            `DATEEXECUTED` datetime NOT NULL,
                                            `ORDEREXECUTED` int(11) NOT NULL,
                                            `EXECTYPE` varchar(10) NOT NULL,
                                            `MD5SUM` varchar(35) DEFAULT NULL,
                                            `DESCRIPTION` varchar(255) DEFAULT NULL,
                                            `COMMENTS` varchar(255) DEFAULT NULL,
                                            `TAG` varchar(255) DEFAULT NULL,
                                            `LIQUIBASE` varchar(20) DEFAULT NULL,
                                            `CONTEXTS` varchar(255) DEFAULT NULL,
                                            `LABELS` varchar(255) DEFAULT NULL,
                                            `DEPLOYMENT_ID` varchar(10) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_CO_DATABASECHANGELOG
-- ----------------------------
BEGIN;
INSERT INTO `ACT_CO_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('1', 'activiti', 'org/flowable/content/db/liquibase/flowable-content-db-changelog.xml', '2023-09-14 11:05:26', 1, 'EXECUTED', '8:7644d7165cfe799200a2abdd3419e8b6', 'createTable tableName=ACT_CO_CONTENT_ITEM; createIndex indexName=idx_contitem_taskid, tableName=ACT_CO_CONTENT_ITEM; createIndex indexName=idx_contitem_procid, tableName=ACT_CO_CONTENT_ITEM', '', NULL, '4.3.5', NULL, NULL, '4660726300');
INSERT INTO `ACT_CO_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('2', 'flowable', 'org/flowable/content/db/liquibase/flowable-content-db-changelog.xml', '2023-09-14 11:05:26', 2, 'EXECUTED', '8:fe7b11ac7dbbf9c43006b23bbab60bab', 'addColumn tableName=ACT_CO_CONTENT_ITEM; createIndex indexName=idx_contitem_scope, tableName=ACT_CO_CONTENT_ITEM', '', NULL, '4.3.5', NULL, NULL, '4660726300');
COMMIT;

-- ----------------------------
-- Table structure for ACT_CO_DATABASECHANGELOGLOCK
-- ----------------------------
DROP TABLE IF EXISTS `ACT_CO_DATABASECHANGELOGLOCK`;
CREATE TABLE `ACT_CO_DATABASECHANGELOGLOCK` (
                                                `ID` int(11) NOT NULL,
                                                `LOCKED` bit(1) NOT NULL,
                                                `LOCKGRANTED` datetime DEFAULT NULL,
                                                `LOCKEDBY` varchar(255) DEFAULT NULL,
                                                PRIMARY KEY (`ID`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_CO_DATABASECHANGELOGLOCK
-- ----------------------------
BEGIN;
INSERT INTO `ACT_CO_DATABASECHANGELOGLOCK` (`ID`, `LOCKED`, `LOCKGRANTED`, `LOCKEDBY`) VALUES (1, b'0', NULL, NULL);
COMMIT;

-- ----------------------------
-- Table structure for ACT_DMN_DATABASECHANGELOG
-- ----------------------------
DROP TABLE IF EXISTS `ACT_DMN_DATABASECHANGELOG`;
CREATE TABLE `ACT_DMN_DATABASECHANGELOG` (
                                             `ID` varchar(255) NOT NULL,
                                             `AUTHOR` varchar(255) NOT NULL,
                                             `FILENAME` varchar(255) NOT NULL,
                                             `DATEEXECUTED` datetime NOT NULL,
                                             `ORDEREXECUTED` int(11) NOT NULL,
                                             `EXECTYPE` varchar(10) NOT NULL,
                                             `MD5SUM` varchar(35) DEFAULT NULL,
                                             `DESCRIPTION` varchar(255) DEFAULT NULL,
                                             `COMMENTS` varchar(255) DEFAULT NULL,
                                             `TAG` varchar(255) DEFAULT NULL,
                                             `LIQUIBASE` varchar(20) DEFAULT NULL,
                                             `CONTEXTS` varchar(255) DEFAULT NULL,
                                             `LABELS` varchar(255) DEFAULT NULL,
                                             `DEPLOYMENT_ID` varchar(10) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_DMN_DATABASECHANGELOG
-- ----------------------------
BEGIN;
INSERT INTO `ACT_DMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('1', 'activiti', 'org/flowable/dmn/db/liquibase/flowable-dmn-db-changelog.xml', '2023-09-14 11:05:25', 1, 'EXECUTED', '8:c8701f1c71018b55029f450b2e9a10a1', 'createTable tableName=ACT_DMN_DEPLOYMENT; createTable tableName=ACT_DMN_DEPLOYMENT_RESOURCE; createTable tableName=ACT_DMN_DECISION_TABLE', '', NULL, '4.3.5', NULL, NULL, '4660725322');
INSERT INTO `ACT_DMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('2', 'flowable', 'org/flowable/dmn/db/liquibase/flowable-dmn-db-changelog.xml', '2023-09-14 11:05:25', 2, 'EXECUTED', '8:47f94b27feb7df8a30d4e338c7bd5fb8', 'createTable tableName=ACT_DMN_HI_DECISION_EXECUTION', '', NULL, '4.3.5', NULL, NULL, '4660725322');
INSERT INTO `ACT_DMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('3', 'flowable', 'org/flowable/dmn/db/liquibase/flowable-dmn-db-changelog.xml', '2023-09-14 11:05:25', 3, 'EXECUTED', '8:ac17eae89fbdccb6e08daf3c7797b579', 'addColumn tableName=ACT_DMN_HI_DECISION_EXECUTION', '', NULL, '4.3.5', NULL, NULL, '4660725322');
INSERT INTO `ACT_DMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('4', 'flowable', 'org/flowable/dmn/db/liquibase/flowable-dmn-db-changelog.xml', '2023-09-14 11:05:25', 4, 'EXECUTED', '8:f73aabc4529e7292c2942073d1cff6f9', 'dropColumn columnName=PARENT_DEPLOYMENT_ID_, tableName=ACT_DMN_DECISION_TABLE', '', NULL, '4.3.5', NULL, NULL, '4660725322');
INSERT INTO `ACT_DMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('5', 'flowable', 'org/flowable/dmn/db/liquibase/flowable-dmn-db-changelog.xml', '2023-09-14 11:05:25', 5, 'EXECUTED', '8:3e03528582dd4eeb4eb41f9b9539140d', 'modifyDataType columnName=DEPLOY_TIME_, tableName=ACT_DMN_DEPLOYMENT; modifyDataType columnName=START_TIME_, tableName=ACT_DMN_HI_DECISION_EXECUTION; modifyDataType columnName=END_TIME_, tableName=ACT_DMN_HI_DECISION_EXECUTION', '', NULL, '4.3.5', NULL, NULL, '4660725322');
INSERT INTO `ACT_DMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('6', 'flowable', 'org/flowable/dmn/db/liquibase/flowable-dmn-db-changelog.xml', '2023-09-14 11:05:25', 6, 'EXECUTED', '8:646c6a061e0b6e8a62e69844ff96abb0', 'createIndex indexName=ACT_IDX_DEC_TBL_UNIQ, tableName=ACT_DMN_DECISION_TABLE', '', NULL, '4.3.5', NULL, NULL, '4660725322');
INSERT INTO `ACT_DMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('7', 'flowable', 'org/flowable/dmn/db/liquibase/flowable-dmn-db-changelog.xml', '2023-09-14 11:05:25', 7, 'EXECUTED', '8:215a499ff7ae77685b55355245b8b708', 'dropIndex indexName=ACT_IDX_DEC_TBL_UNIQ, tableName=ACT_DMN_DECISION_TABLE; renameTable newTableName=ACT_DMN_DECISION, oldTableName=ACT_DMN_DECISION_TABLE; createIndex indexName=ACT_IDX_DMN_DEC_UNIQ, tableName=ACT_DMN_DECISION', '', NULL, '4.3.5', NULL, NULL, '4660725322');
INSERT INTO `ACT_DMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('8', 'flowable', 'org/flowable/dmn/db/liquibase/flowable-dmn-db-changelog.xml', '2023-09-14 11:05:25', 8, 'EXECUTED', '8:5355bee389318afed91a11702f2df032', 'addColumn tableName=ACT_DMN_DECISION', '', NULL, '4.3.5', NULL, NULL, '4660725322');
INSERT INTO `ACT_DMN_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('9', 'flowable', 'org/flowable/dmn/db/liquibase/flowable-dmn-db-changelog.xml', '2023-09-14 11:05:25', 9, 'EXECUTED', '8:0fe82086431b1953d293f0199f805876', 'createIndex indexName=ACT_IDX_DMN_INSTANCE_ID, tableName=ACT_DMN_HI_DECISION_EXECUTION', '', NULL, '4.3.5', NULL, NULL, '4660725322');
COMMIT;

-- ----------------------------
-- Table structure for ACT_DMN_DATABASECHANGELOGLOCK
-- ----------------------------
DROP TABLE IF EXISTS `ACT_DMN_DATABASECHANGELOGLOCK`;
CREATE TABLE `ACT_DMN_DATABASECHANGELOGLOCK` (
                                                 `ID` int(11) NOT NULL,
                                                 `LOCKED` bit(1) NOT NULL,
                                                 `LOCKGRANTED` datetime DEFAULT NULL,
                                                 `LOCKEDBY` varchar(255) DEFAULT NULL,
                                                 PRIMARY KEY (`ID`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_DMN_DATABASECHANGELOGLOCK
-- ----------------------------
BEGIN;
INSERT INTO `ACT_DMN_DATABASECHANGELOGLOCK` (`ID`, `LOCKED`, `LOCKGRANTED`, `LOCKEDBY`) VALUES (1, b'0', NULL, NULL);
COMMIT;

-- ----------------------------
-- Table structure for ACT_DMN_DECISION
-- ----------------------------
DROP TABLE IF EXISTS `ACT_DMN_DECISION`;
CREATE TABLE `ACT_DMN_DECISION` (
                                    `ID_` varchar(255) NOT NULL,
                                    `NAME_` varchar(255) DEFAULT NULL,
                                    `VERSION_` int(11) DEFAULT NULL,
                                    `KEY_` varchar(255) DEFAULT NULL,
                                    `CATEGORY_` varchar(255) DEFAULT NULL,
                                    `DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                    `TENANT_ID_` varchar(255) DEFAULT NULL,
                                    `RESOURCE_NAME_` varchar(255) DEFAULT NULL,
                                    `DESCRIPTION_` varchar(255) DEFAULT NULL,
                                    `DECISION_TYPE_` varchar(255) DEFAULT NULL,
                                    PRIMARY KEY (`ID_`),
                                    UNIQUE KEY `ACT_IDX_DMN_DEC_UNIQ` (`KEY_`,`VERSION_`,`TENANT_ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_DMN_DECISION
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_DMN_DEPLOYMENT
-- ----------------------------
DROP TABLE IF EXISTS `ACT_DMN_DEPLOYMENT`;
CREATE TABLE `ACT_DMN_DEPLOYMENT` (
                                      `ID_` varchar(255) NOT NULL,
                                      `NAME_` varchar(255) DEFAULT NULL,
                                      `CATEGORY_` varchar(255) DEFAULT NULL,
                                      `DEPLOY_TIME_` datetime(3) DEFAULT NULL,
                                      `TENANT_ID_` varchar(255) DEFAULT NULL,
                                      `PARENT_DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                      PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_DMN_DEPLOYMENT
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_DMN_DEPLOYMENT_RESOURCE
-- ----------------------------
DROP TABLE IF EXISTS `ACT_DMN_DEPLOYMENT_RESOURCE`;
CREATE TABLE `ACT_DMN_DEPLOYMENT_RESOURCE` (
                                               `ID_` varchar(255) NOT NULL,
                                               `NAME_` varchar(255) DEFAULT NULL,
                                               `DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                               `RESOURCE_BYTES_` longblob,
                                               PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_DMN_DEPLOYMENT_RESOURCE
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_DMN_HI_DECISION_EXECUTION
-- ----------------------------
DROP TABLE IF EXISTS `ACT_DMN_HI_DECISION_EXECUTION`;
CREATE TABLE `ACT_DMN_HI_DECISION_EXECUTION` (
                                                 `ID_` varchar(255) NOT NULL,
                                                 `DECISION_DEFINITION_ID_` varchar(255) DEFAULT NULL,
                                                 `DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                                 `START_TIME_` datetime(3) DEFAULT NULL,
                                                 `END_TIME_` datetime(3) DEFAULT NULL,
                                                 `INSTANCE_ID_` varchar(255) DEFAULT NULL,
                                                 `EXECUTION_ID_` varchar(255) DEFAULT NULL,
                                                 `ACTIVITY_ID_` varchar(255) DEFAULT NULL,
                                                 `FAILED_` bit(1) DEFAULT b'0',
                                                 `TENANT_ID_` varchar(255) DEFAULT NULL,
                                                 `EXECUTION_JSON_` longtext,
                                                 `SCOPE_TYPE_` varchar(255) DEFAULT NULL,
                                                 PRIMARY KEY (`ID_`),
                                                 KEY `ACT_IDX_DMN_INSTANCE_ID` (`INSTANCE_ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_DMN_HI_DECISION_EXECUTION
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_EVT_LOG
-- ----------------------------
DROP TABLE IF EXISTS `ACT_EVT_LOG`;
CREATE TABLE `ACT_EVT_LOG` (
                               `LOG_NR_` bigint(20) NOT NULL AUTO_INCREMENT,
                               `TYPE_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                               `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                               `PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                               `EXECUTION_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                               `TASK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                               `TIME_STAMP_` timestamp(3) NOT NULL DEFAULT CURRENT_TIMESTAMP(3),
                               `USER_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `DATA_` longblob,
                               `LOCK_OWNER_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `LOCK_TIME_` timestamp(3) NULL DEFAULT NULL,
                               `IS_PROCESSED_` tinyint(4) DEFAULT '0',
                               PRIMARY KEY (`LOG_NR_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_EVT_LOG
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_FO_DATABASECHANGELOG
-- ----------------------------
DROP TABLE IF EXISTS `ACT_FO_DATABASECHANGELOG`;
CREATE TABLE `ACT_FO_DATABASECHANGELOG` (
                                            `ID` varchar(255) NOT NULL,
                                            `AUTHOR` varchar(255) NOT NULL,
                                            `FILENAME` varchar(255) NOT NULL,
                                            `DATEEXECUTED` datetime NOT NULL,
                                            `ORDEREXECUTED` int(11) NOT NULL,
                                            `EXECTYPE` varchar(10) NOT NULL,
                                            `MD5SUM` varchar(35) DEFAULT NULL,
                                            `DESCRIPTION` varchar(255) DEFAULT NULL,
                                            `COMMENTS` varchar(255) DEFAULT NULL,
                                            `TAG` varchar(255) DEFAULT NULL,
                                            `LIQUIBASE` varchar(20) DEFAULT NULL,
                                            `CONTEXTS` varchar(255) DEFAULT NULL,
                                            `LABELS` varchar(255) DEFAULT NULL,
                                            `DEPLOYMENT_ID` varchar(10) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_FO_DATABASECHANGELOG
-- ----------------------------
BEGIN;
INSERT INTO `ACT_FO_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('1', 'activiti', 'org/flowable/form/db/liquibase/flowable-form-db-changelog.xml', '2023-09-14 11:05:25', 1, 'EXECUTED', '8:033ebf9380889aed7c453927ecc3250d', 'createTable tableName=ACT_FO_FORM_DEPLOYMENT; createTable tableName=ACT_FO_FORM_RESOURCE; createTable tableName=ACT_FO_FORM_DEFINITION; createTable tableName=ACT_FO_FORM_INSTANCE', '', NULL, '4.3.5', NULL, NULL, '4660725875');
INSERT INTO `ACT_FO_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('2', 'flowable', 'org/flowable/form/db/liquibase/flowable-form-db-changelog.xml', '2023-09-14 11:05:25', 2, 'EXECUTED', '8:986365ceb40445ce3b27a8e6b40f159b', 'addColumn tableName=ACT_FO_FORM_INSTANCE', '', NULL, '4.3.5', NULL, NULL, '4660725875');
INSERT INTO `ACT_FO_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('3', 'flowable', 'org/flowable/form/db/liquibase/flowable-form-db-changelog.xml', '2023-09-14 11:05:25', 3, 'EXECUTED', '8:abf482518ceb09830ef674e52c06bf15', 'dropColumn columnName=PARENT_DEPLOYMENT_ID_, tableName=ACT_FO_FORM_DEFINITION', '', NULL, '4.3.5', NULL, NULL, '4660725875');
INSERT INTO `ACT_FO_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('4', 'flowable', 'org/flowable/form/db/liquibase/flowable-form-db-changelog.xml', '2023-09-14 11:05:26', 4, 'EXECUTED', '8:2087829f22a4b2298dbf530681c74854', 'modifyDataType columnName=DEPLOY_TIME_, tableName=ACT_FO_FORM_DEPLOYMENT; modifyDataType columnName=SUBMITTED_DATE_, tableName=ACT_FO_FORM_INSTANCE', '', NULL, '4.3.5', NULL, NULL, '4660725875');
INSERT INTO `ACT_FO_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('5', 'flowable', 'org/flowable/form/db/liquibase/flowable-form-db-changelog.xml', '2023-09-14 11:05:26', 5, 'EXECUTED', '8:b4be732b89e5ca028bdd520c6ad4d446', 'createIndex indexName=ACT_IDX_FORM_DEF_UNIQ, tableName=ACT_FO_FORM_DEFINITION', '', NULL, '4.3.5', NULL, NULL, '4660725875');
INSERT INTO `ACT_FO_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('6', 'flowable', 'org/flowable/form/db/liquibase/flowable-form-db-changelog.xml', '2023-09-14 11:05:26', 6, 'EXECUTED', '8:384bbd364a649b67c3ca1bcb72fe537f', 'createIndex indexName=ACT_IDX_FORM_TASK, tableName=ACT_FO_FORM_INSTANCE; createIndex indexName=ACT_IDX_FORM_PROC, tableName=ACT_FO_FORM_INSTANCE; createIndex indexName=ACT_IDX_FORM_SCOPE, tableName=ACT_FO_FORM_INSTANCE', '', NULL, '4.3.5', NULL, NULL, '4660725875');
COMMIT;

-- ----------------------------
-- Table structure for ACT_FO_DATABASECHANGELOGLOCK
-- ----------------------------
DROP TABLE IF EXISTS `ACT_FO_DATABASECHANGELOGLOCK`;
CREATE TABLE `ACT_FO_DATABASECHANGELOGLOCK` (
                                                `ID` int(11) NOT NULL,
                                                `LOCKED` bit(1) NOT NULL,
                                                `LOCKGRANTED` datetime DEFAULT NULL,
                                                `LOCKEDBY` varchar(255) DEFAULT NULL,
                                                PRIMARY KEY (`ID`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_FO_DATABASECHANGELOGLOCK
-- ----------------------------
BEGIN;
INSERT INTO `ACT_FO_DATABASECHANGELOGLOCK` (`ID`, `LOCKED`, `LOCKGRANTED`, `LOCKEDBY`) VALUES (1, b'0', NULL, NULL);
COMMIT;

-- ----------------------------
-- Table structure for ACT_FO_FORM_DEFINITION
-- ----------------------------
DROP TABLE IF EXISTS `ACT_FO_FORM_DEFINITION`;
CREATE TABLE `ACT_FO_FORM_DEFINITION` (
                                          `ID_` varchar(255) NOT NULL,
                                          `NAME_` varchar(255) DEFAULT NULL,
                                          `VERSION_` int(11) DEFAULT NULL,
                                          `KEY_` varchar(255) DEFAULT NULL,
                                          `CATEGORY_` varchar(255) DEFAULT NULL,
                                          `DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                          `TENANT_ID_` varchar(255) DEFAULT NULL,
                                          `RESOURCE_NAME_` varchar(255) DEFAULT NULL,
                                          `DESCRIPTION_` varchar(255) DEFAULT NULL,
                                          PRIMARY KEY (`ID_`),
                                          UNIQUE KEY `ACT_IDX_FORM_DEF_UNIQ` (`KEY_`,`VERSION_`,`TENANT_ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_FO_FORM_DEFINITION
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_FO_FORM_DEPLOYMENT
-- ----------------------------
DROP TABLE IF EXISTS `ACT_FO_FORM_DEPLOYMENT`;
CREATE TABLE `ACT_FO_FORM_DEPLOYMENT` (
                                          `ID_` varchar(255) NOT NULL,
                                          `NAME_` varchar(255) DEFAULT NULL,
                                          `CATEGORY_` varchar(255) DEFAULT NULL,
                                          `DEPLOY_TIME_` datetime(3) DEFAULT NULL,
                                          `TENANT_ID_` varchar(255) DEFAULT NULL,
                                          `PARENT_DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                          PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_FO_FORM_DEPLOYMENT
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_FO_FORM_INSTANCE
-- ----------------------------
DROP TABLE IF EXISTS `ACT_FO_FORM_INSTANCE`;
CREATE TABLE `ACT_FO_FORM_INSTANCE` (
                                        `ID_` varchar(255) NOT NULL,
                                        `FORM_DEFINITION_ID_` varchar(255) NOT NULL,
                                        `TASK_ID_` varchar(255) DEFAULT NULL,
                                        `PROC_INST_ID_` varchar(255) DEFAULT NULL,
                                        `PROC_DEF_ID_` varchar(255) DEFAULT NULL,
                                        `SUBMITTED_DATE_` datetime(3) DEFAULT NULL,
                                        `SUBMITTED_BY_` varchar(255) DEFAULT NULL,
                                        `FORM_VALUES_ID_` varchar(255) DEFAULT NULL,
                                        `TENANT_ID_` varchar(255) DEFAULT NULL,
                                        `SCOPE_ID_` varchar(255) DEFAULT NULL,
                                        `SCOPE_TYPE_` varchar(255) DEFAULT NULL,
                                        `SCOPE_DEFINITION_ID_` varchar(255) DEFAULT NULL,
                                        PRIMARY KEY (`ID_`),
                                        KEY `ACT_IDX_FORM_TASK` (`TASK_ID_`),
                                        KEY `ACT_IDX_FORM_PROC` (`PROC_INST_ID_`),
                                        KEY `ACT_IDX_FORM_SCOPE` (`SCOPE_ID_`,`SCOPE_TYPE_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_FO_FORM_INSTANCE
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_FO_FORM_RESOURCE
-- ----------------------------
DROP TABLE IF EXISTS `ACT_FO_FORM_RESOURCE`;
CREATE TABLE `ACT_FO_FORM_RESOURCE` (
                                        `ID_` varchar(255) NOT NULL,
                                        `NAME_` varchar(255) DEFAULT NULL,
                                        `DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                        `RESOURCE_BYTES_` longblob,
                                        PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of ACT_FO_FORM_RESOURCE
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_GE_BYTEARRAY
-- ----------------------------
DROP TABLE IF EXISTS `ACT_GE_BYTEARRAY`;
CREATE TABLE `ACT_GE_BYTEARRAY` (
                                    `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                    `REV_` int(11) DEFAULT NULL,
                                    `NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `DEPLOYMENT_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                    `BYTES_` longblob,
                                    `GENERATED_` tinyint(4) DEFAULT NULL,
                                    PRIMARY KEY (`ID_`),
                                    KEY `ACT_FK_BYTEARR_DEPL` (`DEPLOYMENT_ID_`),
                                    CONSTRAINT `ACT_FK_BYTEARR_DEPL` FOREIGN KEY (`DEPLOYMENT_ID_`) REFERENCES `ACT_RE_DEPLOYMENT` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_GE_BYTEARRAY
-- ----------------------------
BEGIN;
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('2002', 1, '承接合同评审.bpmn', '2001', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('2003', 1, '承接合同评审.contract_comment.png', '2001', 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
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('2006', 1, '分包合同评审.bpmn', '2005', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('2007', 1, '分包合同评审.sub_contract.png', '2005', 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
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('2010', 1, '品牌项目支付.bpmn', '2009', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('2011', 1, '品牌项目支付.brand_payment.png', '2009', 0x89504E470D0A1A0A0000000D49484452000000D7000001820806000000734956450000188349444154785EED9D0B7054D5FDC72D6DD1B10F6BB54F6BADE283E97474AAB515AB367F2B5AA54AFF882481C18280042885192D4EB1B43CFA908ED5A9A08ED519848252A841A004111262ACC01F230A060481F008100284B7044438FFF33BE66E37679366D9CDD93D7BF87C66BE93ECB9E73ED87B3FFCCEBD7B73F78C33000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000328A52AADDD2A54BBB4D9932E5D53163C6EC79E8A1871A060D1A74B2A0A0401515151D7FF0C1070FEAB60DE3C68D7BB46FDFBE17DAF303808596EAAC575E79E56FA3468DFAB07FFFFEEAA9A79E52CB962D531B376E54F5F5F54A909FF25ADA657ABF7EFD4E0C1D3AB47AC08001B7D9CB03008D966588AE440DC3870F57BA6AA913274E18995A43FA49FF5FFEF297C7070F1EBC223F3FBF83BD6C80D312EDC727162C58306DE0C081AAA4A4447DF4D147B63F4921F3C9FC7DFAF4395C5858D8D95E0FC0698576E213C5C5C5FFA7CFA7D4DAB56B6D5F524296A38794477AF6ECD9CF5E1FC0698354ACA2A222555757673B9216B2BCBE7DFB1EEAD1A3C72DF63A018267C992254344ACB6AA58367AB927EFBDF7DE7DF7DC73CFA5F6BA0182451FFB67FDFEF7BF6F90732497CC9E3D7B9F1E1EBE62AF1F2058E6CF9FFF8C5C154CF5E245B2C8F2F5F9D76E3D3CFC1F7B1B0082431FF3ED7EF39BDF7C2897CF33C1BFFFFDEFFD050505AFDBDB01101CFA5CEB7F070C1890F4E758E922EBE9D5ABD77E7DEE7581BD2D00413179F2E485726745261933664C557E7EFE207B5B008262DCB871BB3335248C58B468D16A3D342CB6B7052028468C18D1505D5D6D1FFF4E59B76EDD662DD79BF6B60004455151D1C9BD7BF7DAC7BF53EAEBEB0F69B9B6DBDB021014BD7BF756C78F1FB78F7FA7E8F51DD4721DB5B7052028060E1C783CD3956BF7EEDD1BA85C103C0F3CF0C0C14C9F73AD59B3A692732E089E912347BE9FE9AB85B366CD9AC3D542089E3163C63C9AE9CFB97EF18B5F94F03917048F3CF3A27FFFFE27327887C64E5DB5767387069C160C1D3A7453A68686D3A74F9FCABD8570DA200F9391675E64E0AEF81A2DD67AEE8A87D30A7D1EB4A2A4A4E4A42D441B72F2CF7FFEF3242D5789BD6E80A091BF10963FC577F597C8AFBDF6DA642D562D7F890CA725F294A6FBEEBBEF485B3F4363F3E6CD73B5583B7886069CD6C8539A74053BD85615ACB1626DD7B9CF5E17C069875498DEBD7BEF93675EA47A91432E5E349E63EDA46201C4214FCAD5556C813CF342FE343FD9CFC174BFBAE9D3A74F93AB823AF379E22E400BC865732D4945AF5EBD0E8C1E3DFADDD2D2D2AA75EBD66DDDB367CF61EDD2A15DBB7655AF5EBDBAF2E5975F9E3D74E8D0F9BAEF1EE9CFE5768024913B2AB43445BA12C97D81CB75E4332BD5F87379637B11775E00B4012297DD06006D0072013802B9001C815C008E402E004720178023900BC011C805E008E402700472013802B9001C815C008E402E004720178023900BC011C805E008E402700472013802B9001C815C008E402E004720178023900BC011C805E008E402700472013802B9001C815C008E402E8036408BB458646A258BEDF900A015B43879CDC86427CF9E0F0092402A53334251B500D2452A53335251B500DA8216AA17550B205D5AA85E79763F004801AB7A51B500DA0AAB7AE5D9D301200DA2EA65B703409A44D5CB6E07C82A4AA9F6D5D5D533962E5DFA616969A95AB87021C970F4FB7EB2A2A26247595959577BFF400EA3C59AA977ACAAABAB530D0D0DEAD8B16324C391F75DDEFFF2F2F2035AB62EF63E821C452A96EC587B8793CCA7B6B6768F966BB9BD8F204791A12015CB8FC87ED0721DB5F711E42832E6B77732C95E647FD8FB08729464E53ABCBF5655BF3949AD5E34D6447E9736BB1F492FC81510C9C87568DF7655B560945A39EF574D226D32CDEE4F520F7205443272D5AC9E932056946DABE726F427A907B9022219B9DE5B3C3E41AA2832CDEE4F520F7205443272552D1C9D2055149966F727A907B90202B9FC0A7205443272C9D5415BAA2832CDEE4F520F7205443272AD7F6362825451649ADD9FA41EE40A8864E4AADFBE4A55BDFABB04B1A44DA6D9FD49EA41AE8048462EC9A6CA290972499BDD8FA417E40A88A4E43A7A54AD5FF274825CD226D312FA9394835C01D19A5C7207C6FB6F4C48102B8A4CE32E8DB60B7205448B72E98A54BBBE4CBDFBCAC804A1EC481FE94B154B3FC81510CDC9D55AB56A2954B1F4835C01D19C5CC954AB9622F3DACB23C907B902A239B96C614E35F6F248F241AE80684E2E92BD20574020975F41AE80402EBF825C01815C7E05B90202B9FC0A72050472F915E40A08E4F22BC81510C8E557902B2090CBAF20574020975F41AE80402EBF825C01815C7E05B90202B9FC0A72050472F915E40A08E4F22BC81510C8E557902B2090CBAF20574020975F41AE80F041AE2953A6A87DFBF625B4C7A7A4A4441D387020F6FAD0A143AAB2B232A15F7C66CE9CA9B66CD992D01ECD6FB7C9F743D7D4D424B46732C815103EC875CE39E7A8E79F7F3EF67AF9F2E54DA61F3972449D7FFEF96ACC9831B1B6BD7BF7CA41A8FEF9CF7FC6DA44BE0F3EF820F6BA53A74EEAF1C71F8FF53F78F0606CDAC489135551515193F53CFCF0C3EA861B6E30BF6FDCB8B1C9B44C05B90222D3722D5BB64CDD71C71DEAF6DB6F8FE5D39FFEB4BAE9A69BCCEFB7DE7AAB6AD7AE9D1A39F23F4F919A376F9EBAE8A28B9A8873F8F06123D7860D1B547D7DBD695BB972A5BAECB2CBD49D77DE6972DE79E7A9EBAEBBCEFC7ECD35D7A89B6FBE3936BFCCD3BE7D7BF5E28B2FAABBEEBACBF4E9D8B1A3FAD6B7BE65B64F963D6AD4A884ED771DE40A884CCB2591A157434343ECB548B06AD52A535DECBE92AE5DBBAA418306A9FCFCFC983812BDF946A6EBAFBF5EEDD9B347AD59B3C654C1683E1176EEDC8FBF56F691471E5103060C68B2DCA953A79A9FBFFEF5AF8DD8575C718591F8EAABAF565FFBDAD7D4A64D9B12B6C575902B20B221970CDFFAF5EB9750B93A74E8D0A4624956AC58612A599F3E7DD47BEFBD67248AA6E9CD57DBB7FFE721A4EFBFFFBEFAD4A73E155BEE17BFF84575EDB5D79ADFA52A45723DF6D863464E995E5050A064F878E38D37C6E4FAF18F7F6C2AD82DB7DC622AA4BDFD2E835C01910DB92422D89FFEF427356DDA34F3FACD37DF54679F7DB61124BE9F0C13AFBAEA2A357AF46873014324DCB56B9799768625979C272553B9E4DC6BE7CE9D667EA99672BE170D1FA321A4C86C6F7326825C01912DB9245BB76E55975F7EB9DAB66D9BA91CC3870F6F32FDD9679F5563C78E35ED2297B4F5EEDDDB541BF9FD0C4BAEF5EBD7FF57B9FAF7EF1F9B26E76F32BFFC7CF9E597D597BEF4A558C5932A676F4BA6825C01914DB92423468C3057022FBEF8E2D8858928D110305E2EB992185D353CC3926BEDDAB5FF755878EFBDF7C6FA4672959797ABBCBC3CD5B973E7D8341111B9206DB22D975C91D39B612478FBEDB713A64B860D1B16932B3E325FBC5C555555EAEEBBEF8EBD8EAF5C3366CC50C5C5C5B169F23997CC2F9573D2A449542E687BB22597ACF7873FFCA191EAB5D75E3355452E5C5C79E595E67C47AA47D477F0E0C14D2E8BCBB99A5CF8D09B6FCE9DEC654711B966CF9E9DD02E912B81728E377FFE7C356BD6AC58E59A33678E39377BF0C10713E6C944902B20322DD74B2FBD64AA830824775DC44F93619D542891E2D5575F8DB50F1932443DF7DC73B1D772AED6AD5B3755585898B0FCF8C8E75A8B162D4A688F229F8BC94FA96AF7DF7FBFF95D3E5C96CAD5DADD1FAE825C019169B95249FC87C7518E26F1457B726787DDD65C92ED9789205740E4825CA753902B2090CBAF20574020975F41AE80402EBF825C01815C7E05B90202B9FC0A72050472F915E40A08E4F22BC81510C8E557902B2090CBAF20574020975F41AE80402EBF825C01815C7E05B90202B9FC0A72050472F915E40A08E4F22BC81510C8E557902B2090CBAF20574020975F41AE80402EBF825C01815C7E05B90202B9FC0A72050472F915E40A08E4F22BC81510C8E557902B2090CBAF2057409496969E8CFF0A5592BDE8FDB043CB75D4DE4790A3545454ECA8ABAB4BD8D124F3D9B265CB742DD7727B1F418E525656D6B5BCBCFC406D6DED1E2A5876A2DFF7DACD9B37BFA0C5DAAAD3C5DE4790C3C80E95FF31758EC9983F17235FE56AB7E550E47D97F71FB1C03F442EBB0D00DA00E402700472013802B9001C815C008E402E004720178023900BC011C805E008E402700472013802B9001C815C008E402E004720178023900BC011C805E008E402700472013802B9001C815C008E402E004720178023900BC011C805E008E402700472013802B9001C815C006D801669B1C8D44A16DBF301402B6871F29A91C94E9E3D1F00248154A66684A26A01A48B54A666A4A26A01B4052D542FAA1640BAB450BDF2EC7E00900256F5A26A01B41556F5CAB3A703401A44D5CB6E07803489AA97DD0E90559452EDABABAB672C5DBAF4C3D2D252B570E14292E1E8F7FD644545C58EB2B2B2AEF6FE811C468B3553EF58555757A71A1A1AD4B163C7488623EFBBBCFFE5E5E507B46C5DEC7D04398A542CD9B1F60E27994F6D6DED1E2DD7727B1F418E2243412A961F91FDA0E53A6AEF23C85164CC6FEF6492BDC8FEB0F711E428C9CA75787FADAA7E73925ABD68AC89FC2E6D763F925E902B209291EBD0BEEDAA6AC128B572DEAF9A44DA649ADD9FA41EE40A8864E4AA593D2741AC28DB56CF4DE84F520F7205443272BDB7787C825451649ADD9FA41EE40A8864E4AA5A383A41AA2832CDEE4F520F72050472F915E40A8864E492AB83B65451649ADD9FA41EE40A8864E45AFFC6C404A9A2C834BB3F493DC81510C9C855BF7D95AA7AF5770962499B4CB3FB93D4835C01918C5C924D955312E49236BB1F492FC8151049C975F4A85ABFE4E904B9A44DA625F4272907B902A235B9E40E8CF7DF989020561499C65D1A6D17E40A8816E5D215A9767D997AF795910942D9913ED2972A967E902B209A93ABB56AD552A862E907B902A239B992A9562D45E6B59747920F7205447372D9C29C6AECE591E4835C01D19C5C247B41AE80402EBF825C01815C7E05B90202B9FC0A72050472F915E40A08E4F22BC81510C8E557902B2090CBAF20574020975F41AE80402EBF825C01815C7E05B90202B9FC0A72050472F915E40A08E4F22BC81510C8E557902B2090CBAF20574020975F41AE80402EBF825C01910DB9F6EFDF1FFBBDBEBEBEC9B4E9D3A7AB43870E25CCB365CB163567CE1C75E4C8918469AD45963777EE5CB561C38626ED555555E6E7E1C3874DF6EDDBA7A64C99A2B66FDFDE641B3319E40A886CC8D5A9532775FBEDB79B7CF5AB5F35D244D33A74E8A0264F9E9C30CFFDF7DF2F079DFAEE77BFAB7EF6B39FA9EF7CE73BEAF1C71F4FE8F7C73FFE513DF5D453EAA1871E523D7AF450D75C738D3AEBACB354BB76EDD4CD37DF1CFB727511EEECB3CF36326DDBB6CDACB76BD7AE661D575D7595BAE0820BD4BA75EB1296EF3AC81510D9904B0EDE4993269983FABCF3CE3395229AD6B16347F5FAEBAFABDDBB77C7DAE4F585175EA8EEBAEB2E53B9FEF18F7FA86F7EF39BAAAEAE2E61D95DBA7451BD7BF736CB9F376F9E7AEBADB7D48E1D3BD451EB998AA5A5A566DDB5B5B56AE3C68DEA9C73CE51070E1C509FF9CC67D4071F7C6064B4E7C944902B20B22197549F214386A8CB2FBFDC540A91E6CE3BEF34F9DCE73EA72EBBEC32F5831FFC40EDDDBBD708F8BDEF7D4FBDF3CE3B6AF4E8D1EAB6DB6E535FF9CA5754797979C27225B22C11CB6E97615EBC2C23468C30CBE9DCB9B33AF7DC73CD76C8B23FF9C94FAA9FFCE427E6B5ACDB5E8EEB2057406443AEABAFBE5A0D1D3AD4C824D5E3DD77DF3555E389279E3007F592254B627D1F7DF451B572E54A23C6B871E3CC10EFD24B2F6DF1FC4B868C5219A36167942BAEB842F5EBD7CFF4916589C022B86C83AC5362CB25FF09C87998BD0E9741AE80C8865C72D00E1E3C58E5E7E71BB9366DDA642ACB45175DA4DAB76FDF442E1168C68C19EAFAEBAF3743C12F7FF9CBEAB9E79E3372C8102E2F2F4F0D1C3830D6FFD65B6F552FBEF8A2A960D1058CAD5BB79AF3ABB2B232F3FA85175E500F3FFCB0115586906BD7AE35EBFEE94F7F1AABA0175F7C31950BD2231B725D79E595EAEEBBEF56C3860D3372C9C12DBF77EBD64D7DFBDBDF8EC925D549CEA1F4662AB90822529E7FFEF9E6E0BFE1861B4C7B5151915AB162456CD9DFFFFEF7CDB996FCBBA49FB4F5EFDF5FFDFCE73F8FF559BC78B19156CEB3E4BCEDE0C183A66249FB4D37DD64E61579EDEDCE44902B20B221970CBF6468F8E4934FAA7BEEB9473DF6D863A632C965F978B9A2C84507199EDD71C71DEAF9E79F376D328F549DF87E22CC673FFB595309E5B55C611439E5CA9F2CC3DE0E91ABA6A6C60C47452EA96837DE78A35AB3668DBAE4924B12FA6722C81510D990ABBABA5A7DE31BDF503FFAD18F4CE5E9D5AB57ECDCA639B924B29D324FF4F9930C2B478E6CFA5CFA92921223ADFC2EE7557FF9CB5F8C3452E544187B9922D7B5D75E6B869132BC1C30608059879C8BC96579BB7F26825C019169B9E4732619AE151717AB9D3B779A61DEBFFEF52FF5ECB3CFAA51A34699D7CB972F6F32CFDFFFFE777365B1B2B2524D9830C188F5F5AF7FDD9C8BC52F57245AB06081F920FABAEBAE33C341F9F0F981071E50679E79A6B9B021154F2A9CAC5BCEEF264E9C68E695F33839A793FEBFFDED6FD5E73FFF79F5D24B2F256CBFEB205740645AAEA79F7EBAC9A5F259B366A955AB5699835DAA980C0FE56E099926D5A77BF7EE468E5DBB769936F90CAA67CF9E664818F58B96FB873FFCC10C33C78F1F6F2E62C4AF578415B9C68E1D1BFB2079D1A2456AE6CC9966E82897E6E32F60C807D97FFDEB5F13B6DF75902B20322D97C861B74549E743DB74E6F529C8151099968BFCF720574020975F41AE80402EBF825C01815C7E05B90202B9FC0A72050472F915E40A08E4F22BC81510C8E557902B2090CBAF20574020975F41AE80402EBF825C01815C7E05B90202B9FC0A7205442EC9257F62220FF28CFF539354DA7D0E7205442EC925A2E84D8E3D2937D5769F835C01815C7E05B90202B9FC0A72050472F915E40A08E4F22BC81510C8E557902B2090CBAF20574020975F41AE80402EBF825C01815C7E05B90202B9FC0A72050472F915E40A88D2D2D293D1B3D37D4F4BB29C6ABBAFD1FB618796EBA8B58B2057A9A8A8D8D1DC1777FB9896EE723FD5765FB365CB96E95AAEE5F63E821CA5ACACAC6B7979F981DADADA3DB952C1428B7EDF6B376FDEFC82166BAB4E177B1F410E233B54FEC7D4392663FE5C4C414141425B0E45DE7779FF110BFC43E4B2DB00A00D402E004720178023900BC011C805E008E402700472013802B9001C815C008E402E004720178023900BC011C805E008E402700472013802B9001C815C008E402E004720178023900BC011C805E008E402700472013802B9001C815C008E402E004720178023900BC011C805D0066891168B4CAD64B13D1F00B4821627AF1999ECE4D9F301401248656A4628AA1640BA48656A462AAA16405BD042F5A26A01A44B0BD52BCFEE07002960552FAA16405B6155AF3C7B3A00A44154BDEC76003805FAF4E9F3052D52F7FCFCFC27F4CF529D4D3A471B2BD791C6D7A58DD3BB4B7F7B19001047616161672D4BB1CEB14691928DF42F96F9ED65029CD668293A69399635234D2A5926CBB3D701705AA1877367E9A1DD935A8893B624C3870F57D3A64D536FBDF596DAB871A3AAAFAF5782FC94D7D22ED3A59F3DAF2C4F962BCBB7D709103C5A800B758559192F45CF9E3DD533CF3CA3B66DDB66444A16E92FF3C9FC9664EFC87AEC7503048B96AAA3CEF67811C68F1FAF6A6A6A6C6F4E09995F9663095623EBB3B70120381A2B564C2CA93673E6CCB13D490B599E55C56AA8601034720E143F14ECDBB7AF7AFBEDB76D37DA0459AE2C3F4EB0773807836069BC7811AB58AEC48A90E5C7573059BFBD4D00394FE3E5F613D1813E77EE5CDB0527C87AE2AAD7092ED3437014C47D8E25171D328975916399BD6D00394B8F1E3D6E891F0EA67B55F05491F5C50F0F657BEC6D04C8490A3EBEA5C91CD8F279543690F5C655AF627B1B01720E5D31CE2D88BB5730D3552B42D61B27D731D92E7B5B01720A7D20778F0E6AB955299B58B74A75B7B71520A7D007F184E8809E3A75AA7DBC6714597F9C5C13EC6D05C8290A0B0BCBA203BAB2B2D23EDE338AAC3FDA16D92E7B5B01720A7D206F8D0EE8EAEA6AFB78CF28B2FEB8CAB5D5DE56809C42578883D101BD77EF5EFB78CF28B2FEB8CA75D0DE56809C421FC81F4507F4F1E3C7EDE33DA3C8FAE32AD747F6B602E414542E0047C8B94D744073CE05D08670B510C011057CCE05E086028FEED018366C58FC8370B84303721BEE2D0470480177C503B8C187BFE72A2C2C8C0D09F97B2E088A02FE1219C00D3C4303C021D978FA53FC7090A73F41B0C873030B3E7EC4B439D85D3FB750AF2F562965BD3CB71082461FE417167CFC04DC580573F1C4DDF88AD5B83E9EB80BE1A30FFC8EF1824978563C401BD158C162434449BADF7262552B331494F5D8EB06089EB6F87E2EEB96A6287C3F1780D078999E6F9604704521DF890CE0163D9CFB8296A5BB1EDA3DA17F96EA6CD239D22892FC94D7A58DD3BB4B7F7B1900000000000000000000000000901DFE1F5EBC1AD481890A180000000049454E44AE426082, 1);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3002', 1, '项目流转.bpmn', '3001', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3003', 1, '项目流转.project_circulation.png', '3001', 0x89504E470D0A1A0A0000000D4948445200000168000003DA0806000000BA78C282000059CE49444154785EEC9D07981455DAB63121E6AC6B604D6B0E6BCE615C4505545C57641003AEA0B83F288655D71505D4555CB3AE01038A2BF289EE2A481226380A28200A8208C89019878C8033E8A7E7AFF7409DAFE75437DD3343559DAEB9EFEB7AAEE9AE3A5DDD53D5EFDD6F9FAA81468D00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000020E128A5361D3366CC657DFBF6FDA8478F1E4BEEBAEBAEAA9B6EBAE9D7C2C242D5A953A79FEFB8E38E1FBC65DF3DF0C0038F5D77DD754DEDC70300C046C613739361C386F5EED6ADDB4F1D3A7450CF3FFFBCFAECB3CFD4CC9933D5D2A54B95203FE5BE2C97F5D75F7FFD2F5DBA7429EFD8B1E305F6F600006023E009F7FF791D7155D7AE5D95D73DAB5F7EF9450B391B324EC6DF7CF3CD3FFFE52F7F99D0A64D9B03ED6D0300401DF01CBBC9F0E1C3DFBAF1C61BD5902143D4FFFEEFFFDA0ECE09799C3CBE7DFBF6ABDBB66DDBCC7E1E0000A8059E5737F9CF7FFEF3F94D37DDA4BEFDF65BDBB97542B6D3A143871FAFBCF2CAEBEDE70300801C91CEB953A74EAAB2B2D2F66CBD90ED5D77DD75ABAEB8E28AF3ECE70400802C8C1E3DFAFF899C3756E76CE36DF7D76BAEB96679EBD6AD7F673F37000064C0F36793071F7CB04AE68CC3E4830F3E587EE595570EB39F1F0000323074E8D097E46A8DBA9E10CC15D97E870E1D165F71C515E7D8AF0100002C3C6F6E7AEFBDF7FE2497C645C1A79F7EBAA2B0B0F013FB75000080C5E8D1A3FFD8B163C79CAF73AE2FF23CEDDAB55BD1BA75EBBDEDD702000029BCF1C61B23E42F00A3A4478F1E93DBB4697393FD5A00002085071E78607154D31B3E23478E9C525858F81FFBB50000400A77DE7967557979B9EDD05099366DDA6C4FD0E3ECD70200002974EAD4E9D765CB96D90E0D95A54B97AEF204BDC07E2D000090C2D5575FAD7EFEF967DBA1A1E23DDF0F9EA0ABEDD702000029DC78E38D3F47DD412F5EBCF83B3A6800802CDC7EFBED3F443D07FDCD37DF8C670E1A00200BF7DC73CFF4A8AFE2F8EF7FFF3B90AB380000B2D0A3478FC7A2BE0EBA73E7CE43B80E1A00200BF27F0876E8D0E19708FF92F07BAF7B5ECC5F120200E440972E5D664535CDD1BF7FFF7FF36F710000E488FC07AFF27F0846F0AFD9CDF3E43C837FCD0E00A01674EEDC79C29021437EB5A5BA11F9F5D1471FEDE3097A88FDDC0000B001E47F3A91FF962AACFF51E5E38F3F7EC3937305FFA30A00401D90FF7DFBCF7FFEF38F1BFBFF249C3D7BF6204FCE0BF93F090100EA81FCEFDB5E27FDC3C6EAA4D777CE0BBCFCD97E2E0000A825D2E95E7DF5D5CBE5FF10ACEB89433921B87ECEF97B3A6700808D489B366D0EF4BAE9E1F27F08CA7F5395EB75D2DEB8CAFEFDFBBF25576B78192ADBB1B70D00001B01B924CE136D59BB76ED5676EFDEFDEBA2A2A2C9D3A64D9BBB64C992D59E8F572D5AB4A87CCA9429E3DF7FFFFD0FBA74E932D41BBB44C673291D004044C85FFE79E2EDE475C4F2EF688CF522D734ABF53FC7AE5FDE89BF100400700011B4BD0C00001C00410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A8206007014040D00E028081A00C0013C19978890B3A4C47E1C0000848C27DF823442B653603F0E000022403AE43452A67B0600881BE990D38899EE1900C0053274D174CF00007193A18B2EB0C70100400C585D34DD3300802B585D7481BD1E000062C4EFA2EDE5000010337E176D2F0700C86B94528DCBCBCBDF193366CC4F4545456AC4881124E278FBFDD7B2B2B285C5C5C5ADECE303000D184FCE033C39A8CACA4A555555A5D6AE5D4B228EEC77D9FFA5A5A52B3D61B7B48F11003450A4731639D8D220D1A7A2A2628927E8B1F6310280068A4C6BD039BB11390E9EA0ABED6304000D149903B54541E28B1C0FFB18014003255741AF5E51A1CAC7F5515346F6D491DBB2CC1E47EA17040D00865C04BD6AF902357978373571F05F6B4496C93A7B3CA97B103400187211F4BC29030372F6337FCAA0C07852F720680030E422E8A925BD0262F623EBECF1A4EE41D00060C845D09347740F88D98FACB3C793BA074103800141BB15040D00865C042D576DD862F623EBECF1A4EE41D00060C845D033463D1710B31F59678F27750F820600432E825EBA60929AFCD1FD0139CB3259678F27750F820600432E8296CC1ADF37206859668F23F50B820600434E82AEAE563346BF1010B42C937581F1A4CE41D00060C82668F94BC1E9A39E0DC8D98FACE3AF09375E10340018320ADAEB8C2B6614ABAF87DD1390B21D192363E9A6EB1F040D00867482CED635670ADD74FD83A001C0904ED0B974CD99228FB5B747720F820600433A41DBD2AD6DECED91DC83A001C0904ED024BE206800302068B782A001C080A0DD0A8206000382762B081A000C08DAAD206800302068B782A001C080A0DD0A8206000382762B081A000C08DAAD206800302068B782A001C080A0DD0A8206000382762B081A000C08DAAD206800302068B782A001C080A0DD0A8206000382762B081A000C08DAAD206800302068B782A001C0E0A2A0CBCACAD4CA952BCD7D798DA9F7FD0C193224B02C355F7FFDB51A376E9CB99DBA6EFEFCF9EA934F3E093CC6CFD2A54B03CBA208820600439C82FEF1C71F55BB76EDD4C5175F5C233BEDB493EAD8B1A319F7D0430FA9638E39A6C698F3CE3B4F6DB1C516EACB2FBF34E3860F1FAE9A376FAE73DA69A7A93DF7DC53B56CD9523DF9E4936AB7DD765313274E346357AC58A18E3FFE78F5B7BFFD4D0D1830C03C4E525050A00E3DF450B56AD5AAC06B0E3B081A000C510B7AE4C8913524BAFDF6DBEB2E77E0C081EAD24B2FD563962D5B56E3318F3EFAA86ADDBA758D6513264C50BBEFBE7B8D659F7DF6993AFBECB3D5BC79F3D441071DA4DE7BEF3D75EEB9E7EA0F81F7DF7F5FEDBBEFBE35845E5252A2AEBEFA6A555D5DAD162E5C6896F7E9D3475D72C92535B61D5510340018A216B464EEDCB9AAB0B0508B70CD9A356A9F7DF651471D75943AFCF0C3B5B877D96517555A5A6AC63FFEF8E3BA1B4EED72CF3CF3CC80A025575D7595084EB56FDF5EDF7FE79D77D411471CA14E38E104FD212032F6C74A175D555515D886BCAE3FFEF18F81E55104410380210E414BDAB66DAB4528B7BD97A1BEFFFE7B3DAD3066CC18B5E5965B6A71FB639F78E2899C3A6849A74E9DD4669B6DA6CE3FFF7C2DF2BDF7DE5B77E9BBEEBAABBAE79E7BD4E8D1A3D5BFFEF52F3D4D22E2BEE5965BB4A42B2B2BCD36E8A001C0095C10B4CC252F59B2448B5A4ECED9827EEAA9A7B20A5A1E2FD315975F7EB93AECB0C3D429A79CA25AB468A1452CF3D7B2ECACB3CE520F3CF0809E5B969384D225BFF2CA2B5AD0B22DBF3BFFFDEF7FAF7FDAAF398A20680030C429E8575F7DD517929EF690CE57A6206C41CB49BE6C531C1515156AFAF4E97AFE59A648529FAB73E7CE7A1EDB7E0D2268FF43A271E3C6A68B96E99541830605C64711040D0086A805BD78F1627DF2EEC8238F54FBEDB79FEAD9B3A716745151916ADAB4A91E2382968ED87F8C083A5B07ED67D6AC595AB6A9577CECBFFFFEAA57AF5E81B1BEA0E524A53C67EA34C7EAD5AB6B7C484415040D0086A8052D73CCD2E1F6EEDD5B4B5072EDB5D7AA1B6EB8411D77DC71EAA28B2E52AD5AB5D297E0F98F919384B90A5AAEC690A98E458B16E9FB7245885C2D3265CA94C05811B49CAC94AB476C41BFF0C20BEADD77DF0D3C26EC20680030442D68C9B469D3CC6DF90394BBEFBE5BCF194B775D5C5CACB6D9661BF5D24B2F9931D2FDA69BE290137FF6B625FDFAF5D35DB35CA5F1FAEBAFAB430E39447DF3CD37BABB4EBD6AE38C33CED01F16322DB2D5565BE9F5FEBA1E3D7AA87BEFBD37B0EDB083A001C01087A0FD7CFAE9A7FA44DE33CF3C53633A412E8DF3E786250F3FFCB0EAD6AD5B8DC74A07DDAC5933735FE68DE5CA0B7F5A63934D36D13FE52A8E934F3E59DFDE638F3DD4F5D75F6F2EB5BBF9E69BD56BAFBDA66FCBC9C5264D9AE80F0789DC96AEDE7ECD6107410380214E41E79A7473C1E9AE5F9E3D7B768DEB9CB345A657EC657107410380211F04DD9082A001C080A0DD0A8206000382762B081A000C08DAAD206800302068B782A001C080A0DD0A8206000382762B081A000C08DAAD206800302068B782A001C080A0DD0A8206000382762B081A000C08DAAD206800302068B782A001C080A0DD0A8206000382762B081A000C08DAAD206800302068B782A001C080A0DD0A8206000382762B081A000C08DAAD206800302068B782A001C080A0DD0A8206000382762B081A000C08DAAD206800302068B782A001C080A0DD0A820600435151D1AF555555015190E8E31D87859EA0ABED6304000D94B2B2B285959595015990E83367CE9CFE9EA0C7DAC708001A28C5C5C5AD4A4B4B575654542CA1938E27DE7EAF983D7B763F4FCE73BDB4B48F11003460440AD2B979592B73A0F998C2C2C2C0B23C8AEC77D9FFC81900928708DA5E0600000E80A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A8206007014040D00E0009E8C4B44C85952623F0E000042C6936F411A21DB29B01F07000011201D721A29D33D0300C48D74C869C44CF70C00E00219BA68BA670080B8C9D04517D8E300002006AC2E9AEE1900C015AC2EBAC05E0F000031E277D1F67200008819BF8BB6970300E4354AA9C6E5E5E5EF8C1933E6A7A2A2223562C4081271BCFDFE6B5959D9C2E2E2E256F6F10180068C27E7019E1C546565A5AAAAAA526BD7AE251147F6BBECFFD2D2D2959EB05BDAC708001A28D2398B1C6C6990E8535151B1C413F458FB1801400345A635E89CDD881C074FD0D5F6310280068ACC81DAA220F1458E877D8C00A08192ABA057AFA850E5E3FAA829237BEAC86D59668F23F50B820600432E825EB57C819A3CBC9B9A38F8AF3522CB649D3D9ED43D081A000CB9087ADE94810139FB993F6550603CA97B103400187211F4D4925E0131FB9175F67852F720680030E422E8C923BA07C4EC47D6D9E349DD83A001C080A0DD0A820600432E8296AB366C31FB9175F67852F720680030E422E819A39E0B88D98FACB3C793BA074103802117412F5D30494DFEE8FE809C6599ACB3C793BA074103802117414B668DEF1B10B42CB3C791FA054103802127415757AB19A35F08085A96C9BAC07852E7206800306413B4FCA5E0F451CF06E4EC47D6F1D7841B2F081A000C1905ED75C615338AD5D7C3EE0948D98E8C91B174D3F50F820600433A4167EB9A33856EBAFE41D000604827E85CBAE64C91C7DADB23B907410380219DA06DE9D636F6F648EE41D00060482768125F1034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D00060884BD003070E54CB962D33F7870F1FAE56AE5C1918979AE9D3A7ABF1E3C70796D72783070FD63FA74C99B2D1B75D9720680030C425E8162D5AA8DB6EBBCDDC7FEAA9A7D4E9A79FAE6FCF9F3F5F555757EBDBF253E429B7172D5AA4F6D9671F2D31FF71959595816DA78B3C76D4A85135964D9D3A556DBEF9E67A79A74E9D54F3E6CDCD87C677DF7D17D8461441D00060884BD0AD5AB552AFBDF69ABAFFFEFBD5C5175FAC2EB8E0021193BEBDD75E7BA98E1D3B6A398F193346EDBBEFBE7AB944C6ECBFFFFEE6FECE3BEFAC860D1BA67EFCF14775F3CD376BC9A6CBA1871EAA76DA69273561C204F31A1E7CF04175E59557AA050B16A86DB6D9469D75D65966BBDB6DB79DBAE79EE8FF8772040D0086A8052DCF27C2DC638F3D54D3A64DD501071CA0A64D9BA6A57BD75D77A9175F7CB1C654C769A79DA6EEBCF3CEC07624B2FC924B2E5193264DD2F7972C595263DAE4E0830F56C5C5C581C749D6AC59A39FFF934F3ED1DDF3D34F3FADE52FCBEDB15106410380216A414B44C0BBEDB69BEAD1A3875ABD7AB5EADCB9B3BAF6DA6B7577BBF5D65BAB01030698B137DE78A3FAC31FFE603ADBD46CB5D556BAEB4D95726A3624E8E79E7B4E0BB94D9B36EAB2CB2ED3AF49EE8BA0A5732F2F2F0F3C268A20680030C421E8D2D2522DC35D76D9459D79E699FAF6E1871FAE9A3469A29E7CF24955565666C6FEF0C30F6AC89021EAC30F3FD4F78F3BEEB88CD2B59349D032C77DECB1C7AA430E3944DD72CB2D6AF9F2E546D0175D7491EEDAE50324753A24AA20680030C421E81B6EB8419F9C7BF8E187D5F3CF3FAF3EFBEC3375F9E597ABAE5DBBAA7BEFBD57CB71F2E4C966FCCB2FBFACE7A5172E5C5843D0725587BDEDD46412B474E8322D22221E3468905E96DA41CB7D4E120240EC442D68993A38E18413F4551C7DFAF4514B972ED5D30CF7DD779F7AFBEDB7D58E3BEE18B8DA42C42DD31C725B047DEAA9A7EA938A5B6CB1853ED1683F879F4C82F6934ED0D2414B1A376EAC3F3CECC7841D040D0086A8052DCF272705E5E4DE2BAFBCA2E792E52A8CDEBD7BEB138532A79CDA19575555E9E5725545CF9E3DEB35C53174E850BD3DFF7E3A41739210009C216A41FB69D9B2A59EBAF8F6DB6F55EBD6AD55BB76EDD4E2C58BF51F8EC8A573FEB5CF8F3DF6983AFEF8E3F535CB471E79A49668972E5DD4ABAFBEAAFAF7EFAF3B6891ACC4BEB44E2E9D936E5B6E376BD64C6DB2C926AA6DDBB6FA923CD9F649279DA43EF8E0037D5BE6A165DB72D2D27EAD5106410380212E41CB9CF3ADB7DEAA3A74E8A0AF754E5D27D7467FFEF9E7FA249D5C2FFDFDF7DFEBE5D2DD8A94FFF297BFE8E50505057AEA63ECD8B17AFDDCB97303CFB3A1C86365FE5B6ECB87C37EFBEDA756AC581118176510340018E212742E5309FE5F138695D4D720CF953AFD115710340018E21234491F040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED56103400188A8A8A7EADAAAA0A8882441FEF382CF4045D6D1F230068A09495952DACACAC0CC882449F3973E6F4F7043DD63E4600D040292E2E6E555A5ABAB2A2A262099D743CF1F67BC5ECD9B3FB79729EEBA5A57D8C00A001235290CECDCB5A9903CDC71416160696E55164BFCBFE47CE00903C44D0F63200007000040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A32068000007F0645C2242CE9212FB71000010329E7C0BD208D94E81FD3800008800E990D34899EE1900206EA4434E2366BA67000017C8D045D33D0300C44D862EBAC01E070000316075D174CF0000AE6075D105F67A00008811BF8BB697030040CCF85DB4BD1CC267C488116778F9D68B224E64A197DE252525BBDAC70AF210A554E3F2F2F277C68C19F3535151917DB0F32622687B59BEC4DBEFBF9695952D2C2E2E6E651F1FD7F15EFF54FBF7214E64987DAC200FF1E43CC09383AAACAC545555556AEDDAB524E2C87E97FD5F5A5ABAD22BAC96F6317219EFF5FE92460E24FEFC641F2BC843A4731639D8D220D1A7A2A26289575863ED63E432A952B07F1F127D528F877DAC200F91690D3A673722C7C12BAC6AFB18B90C82762B083A6150586E25DF0A0B41BB15049D30722DACD52B2A54F9B83E6ACAC89E3A725B96D9E348FD926F8585A0DD0A824E18B914D6AAE50BD4E4E1DDD4C4C17FAD115926EBECF1A4EEC9B7C242D06E0541278C5C0A6BDE94810139FB993F6550603CA97BF2ADB010B45B41D0092397C29A5AD22B20663FB2CE1E4FEA9E7C2B2C04ED561074C2C8A5B0268FE81E10B31F59678F27754FBE151682762B083A61E45258083ABAE45B612168B782A013462E8525576DD862F623EBECF1A4EEC9B7C242D06E0541278C5C0A6BC6A8E70262F623EBECF1A4EEC9B7C242D06E0541278C5C0A6BE982496AF247F707E42CCB649D3D9ED43DF9565808DAAD20E884916B61CD1ADF37206859668F23F54BBE151682762B083A61E45458D5D56AC6E81702829665B22E309ED439F9565808DAAD20E88491ADB0E42F05A78F7A3620673FB28EBF26DC78C9B7C242D06E0541278C8C85E575C615338AD5D7C3EE0948D98E8C91B174D3F54FBE151682762B083A61A42BAC6C5D73A6D04DD73FF9565808DAAD20E88491AEB072E99A33451E6B6F8FE49E7C2B2C04ED561074C2485758B6746B1B7B7B24F7E45B612168B782A0130685E556F2ADB010B45B41D00983C2722BF9565808DAAD20E8844161B9957C2B2C04ED561074C2A0B0DC4ABE151682762B083A6150586E25DF0A0B41BB15049D30282CB7926F8585A0DD0A824E1814965BC9B7C242D06E0541270C0ACBADE45B612168B782A0130685E556F2ADB010B45B41D00983C2722BF9565808DAAD20E8844161B9957C2B2C04ED561074C2A0B0DC4ABE151682762B083A6150586E25DF0A0B41BB15049D30282CB7926F8585A0DD0A824E1814965B71A9B00A0B0B4BBC14D8CB5341D06E0541270C0ACBADB854589E9CD5FA64143582762B083A6150586EC5A5C24A117446512368B782A0130685E5565C2AAC34820E881A41BB15049D305C2CACB2B232B572E54A735F5E63EA7D3F43860C092CF3B378F16255525212589E9A0F3EF8C06C77C18205EAF3CF3F57E3C78F574B972E0D8C8D2A2E15561A31DB29E9DBB76FEC829E3C797260D9942953D4AC59B3CCFDAFBFFE5A4D9F3EDDDC9F376F9E3ED6F6E3523369D224F5E5975F0696A766E0C0816AD9B265E6FEF0E1C3D3BE57A30A824E187116D68F3FFEA8DAB56BA72EBEF8E21AD969A79D54C78E1DCDB8871E7A481D73CC3135C69C77DE796A8B2DB60814D0B469D3F4CF55AB56A9238F3C528940FC75F3E7CFAF31F6ECB3CF563D7BF6D4B7BFFDF65BB5D5565BA96BAFBD569D74D2496ACD9A3581D71B45D248302F12E5FB4844DBAA552BD5BC797375E185178A88D4A1871EAAEFFBD9679F7DD4C9279FACDF07F298DB6FBF5DFDFEF7BFD7C755DE072FBFFCB21EB370E142FD615E5555A5C7C9FD254B96E8DB3367CE543BECB0839A3D7BB679EE54194B5AB468A16EBBED3673FFA9A79E52A79F7EBABE2DCF535D5D1D78FD610641278C280B4B3272E4485344A79D769ADA7EFBEDD5B871E3742772E9A597EA3176113CFAE8A3AA75EBD635964D983041EDBEFBEE359649E7B2D75E7B19897BBF9E8E7F7FBBEDB6AB21EC73CF3D57F5EFDF5FDFFEEEBBEFF4637BF5EAA53A77EEAC56AF5E6D8A3BCA84595822527BD986B0259C9292C298A738264E9CA87AF7EEADAEB8E20AF5F4D34FAB19336668F9FEEE77BFD3025FB46891192B8DC02EBBECA28E3AEA2875C1051768E9CA87FBC1071FAC457FB6F7412D0297B1F7DE7BAF3AE79C73F476FFF4A73FE9F78F3403175D749196B1BCE7860E1D6AB62D8F7FEDB5D7D4FDF7DFAFDF63B27D798CDC96F793341A514A1A41278CA80B4B3277EE5C5DE87DFAF4D145259D8C14CFE1871FAEC52DC5545A5A6AC63FFEF8E36ACF3DF7ACD1219D79E6990141DF71C71DEAACB3CED2B7E5F7FAE69B6FCCBA975E7A49178B744B6FBEF9A6DEC66EBBED66242E452905F5D8638FA9FDF7DF5F1D7FFCF17A4CD4920EB3B03682A08D987DE212B4445ED311471CA156AC58A1252DC75EE42B72FCCD6F7EA3FEFDEF7FEB71FFF8C73FCC714E8DDF7D8B94FD6DFEF6B7BF55C5C5C5E6BE7CA87FF8E187FAB67CDBEAD2A58B2A2F2FD7BFAFBC3FF6D8630FD5B4695375C00107E86F6FF2DEB9EBAEBBD48B2FBE18CB5407824E18711496A46DDBB65AD072DB7B19EAFBEFBFD75F53C78C19A3B6DC72CB1A530C4F3CF1444E1DB46C43042CB75BB66CA93B207F9D7C751D3B76ACEE66E4EBAC74C8CD9A3553EFBDF79E5E2E45E70B5A3AE8E5CB9747DAF9F809B3B0EA21E880987DE210F4800103CC3730EF25E80F76F929D365D75D779DFE1674DC71C7E9E32AF3D3B24C3EE4F7DE7B6F3D5576EAA9A76A89171414E8F750EA39073917215363FEB72EE9B445E4725BBEEDC9FBD31F2B02960FF91E3D7AE8F793BC6F648A4CDE9B5B6FBDB57E9DF66B0F3B083A61445958A94915B41481CCFB792F47178B2D6899D7CB2668E9B8E52BA8DF61CB7CB2CC25A776DDB2DD0E1D3A68F1CAD7602944F95090424FEDA0F7DB6F3F75D0410799B1F66B0F336116561D049D51CC3E71085A8E899CE47BFBEDB7F5713DFAE8A3D54D37DDA4AEBEFA6AFD3E79F6D9678DA0FDC73CF7DC735AD0F6B730E97CEDED8B74E5035B6ECBB7B9CACA4A735B04EE8F93F79CB70BF472D996DC960F8B264D9AA8279F7C529FECB6B71D761074C288B2B05223827EF5D557FD37929EF6D86CB3CD74F1D98296377B2E531C3FFCF083FE2992F5BB673951235F5353CFF4CBD761292229C4418306E9EE474E08A576D0B22C8EAB39C22CACDA0A3A17E210B41F11F4F9E79FAFAFD090290511B47C7392F30CB6A045DA3295967AA2593A6859666F57A647E4035BDE67D23CC8372DFF76EA89E61B6EB8416DBEF9E6EAE1871F56CF3FFFBCFAECB3CFD4E5975FAEBA76EDAAA74DE4FD95EE0A933083A01346D48525531032AD20DDAB74AA32AFE7BD0C555454A4E7F2648C08DA3F932E114167EBA0FDC8C921298C071F7C5017D39FFFFC67FD1537758C7C35957946293C91B1149FDD41FB5F85535F471409B3B0922868FF7D211DB208FAB0C30E53EFBFFFBE16F4A79F7E6AC6CAEB93730F9B6EBAA96E02E45B99C87CD8B061BA2B96292D7FAC74C4F2DE1089376EDCD84C71C86DFFD23DE9B04F38E104FDAD4DBE09CA87799B366DD47DF7DDA75FD78E3BEEA8468D1A1578CD610741278CA80B4BE6F0A400E40CBC74A91299B7936E448A4ACE96CB997139F3EE3F46E60F7315B4CC2F7FF1C517BA4B16E17ABFA2BAE69A6B6ACC1DFA9122940E5A4E04CA5500A91DB43D36AA8459584916B4C857E4B8EDB6DBEA13BCF2615F5151A1DE7DF75D3D46221FC4D2F1CAED638F3D569F1014F1CA07B25C7D21EF45D99674C4FE093EB9E4D39FE29046C1FF9626BFAF9C14BCE4924BD42BAFBCA2B723B297F7B59C28941396A9D75D4715049D30E2282CFF5A658914C2DD77DFAD4E39E514DD5D4B67BBCD36DBE8AB2EFC3172D227DD14C7AEBBEE1AD8B67447323778D96597E9CBA3BEFAEA2BDD4DCBD97D799CC878CE9C39EA91471E51871C7288FEC302799C5CF1E10BBA53A74E81ED4695300B2B4982EEDEBDBB96E055575DA5EF4BB72C97CDC965937242586E4B472D1FD853A74ED5530D679C7186BE1C4EBA5D9170FBF6ED03DBB523EF9BD479673BD285CB35D5721DBD885F4E54CAFB78F0E0C16AE79D77D67F30633F26CC20E884117561A5468A4ABE223EF3CC3335E69CDF79E71D73025122C5D4AD5BB71A8F950E5A3A60FFBE5C3B2DF3DAFEB4C5C71F7F5C63BC5CE72C5F4165DA43BA7391FED9679F6D3A22B9AE56EECB1523725956EA63A34C9885952441CB54961C4F99F7956B98AFBFFE7A7D0CFDF5F22DCAFF0312F9C0956BECFFFBDFFF9AF5F201FDF7BFFF3DB05D3B721259AE0EB297FB9139E75B6FBD559F50B6BFA5C98781FC75AAFD983083A01346D4855597A4FBAB3EFF2FBFEA1AFBEA0CFF39D23D579409B3B09224E8FA26750A6D43F1A73D3225EEF78B1D049D30F2ADB0929E300B0B41273F083A6150586E25CCC242D0C90F824E1814965B09B3B01074F283A0130685E556C22C2C049DFC20E8844161B995300B0B41273F083A6150586E25CCC242D0C90F824E1814965B09B3B01074F283A0130685E556C22C2C049DFC20E8844161B995300B0B41273F083A6150586E25CCC242D0C90F824E1814965B09B3B01074F283A0130685E556C22C2C049DFC20E8844161B995300B0B41273F083A6150586E25CCC242D0C90F824E1814965B09B3B010F4BA782FBBD6B1B7E16A1074C2C8A7C26A0809B3B010F4BA34AAA5706B3B3ECE20E884914F85D51012666121E875699441B8B55DEE621074C2C8A7C26A0809B3B010F4BA34CA20DCDA2E7731083A61E453613584845958087A5D1A65106E6D97BB18049D30F2A9B01A42C22C2C04BD2E8D3208B7B6CB5D0C824E18F954580D21611616825E9746EB852B3FB325757C3E0441278C7C2AAC8690300B0B41AF4BA30CC2ADED721783A013463E15564348988585A0D7A55106E1D676B98B41D009239F0AAB2124CCC242D0EBD22883706BBBDCC520E884914F85D51012666121E875699441B8B55DEE621074C2C8A7C26A0809B3B010F4BA34AAA5706B3B3ECE20E884515454F46B555555E04093E8E31D87855E6155DBC7686381A0D7C57BD9B58EBD0D5783A013465959D9C2CACACAC08126D167CE9C39FDBDC21A6B1FA38D454882FEC51742757575E07722D165C58A15A982FEC93E569087141717B72A2D2D5D595151B1844E3A9E78FBBD62F6ECD9FDBCA29AEBA5A57D8C361621097A416AD7469C49997DAC204FF10E664B2F63BDAC4D73A0F322221F7B591E45F6BBECFFD0E42C8424E817D2FC3E24DEAC193E7CF8F1F6B102888D30E49334C2D8479F7EFAE9769E10867AF9398D2848B4F9D94B297206E708433E49837D0400B1807CB2C33E028058403ED9611F01402C209FECB08F002016904F76D84700100BC8273BEC23008805E4931DF61100C402F2C90EFB08006201F964877D0400B1807CB2C33E028058403ED9611F01402C209FECB08F002016904F76D84700100BC8273BEC23008805E4931DF61100C402F2C90EFB08006201F964877D0400B1807CB2C33E028058403ED9611F01402C209FECB08F002016904F76D84700100BC8273BEC23008805E4931DF61100C402F2C90EFB08006201F964877D0400B1807CB2C33E028058403ED9611F01402C209FECB08F0020743CD194886CB2A4C47E5C4307410340E878A2294823643B05F6E31A3A081A0022413AE43452A67BDE00081A0022413AE43462A67BDE00081A0022433AE53472A67BCE00820680C8C8D04517D8E3601D081A0022C5EAA2E99E370082068048B1BAE8027B3DFC1F081A0022C7EFA2EDE55013F61100448EDF45DBCBA12661ECA31123469CE1E55B2F8A3891855E7A979494EC6A1F2BC84394528DCBCBCBDF193366CC4F454545F6C1CE9B887CEC65F9126FBFFF5A5656B6B0B8B8B8957D7C362621097AAAFDFB102732CC3E56908778721EE0C941555656AAAAAA2AB576ED5A127164BFCBFE2F2D2D5DE915564BFB186D2C4212F42F69E440E2CF4FF6B1823C443A6791832D0D127D2A2A2A96788535D63E461B8B90046DA460FF3E24FAA41E0FFB58411E22D31A74CE6E448E835758D5F631DA5820E8E40741270C0ACBAD845958083AF941D00923D7C25ABDA242958FEBA3A68CECA923B765993D8ED42F611616824E7E1074C2C8A5B0562D5FA0260FEFA6260EFE6B8DC83259678F27754F988585A0931F049D307229AC79530606E4EC67FE944181F1A4EE09B3B01074F283A013462E8535B5A45740CC7E649D3D9ED43D611616824E7E1074C2C8A5B0268FE81E10B31F59678F27754F988585A0931F049D3072292C041D5DC22C2C049DFC20E884914B61C9551BB698FDC83A7B3CA97BC22C2C049DFC20E884914B61CD18F55C40CC7E649D3D9ED43D611616824E7E1074C2C8A5B0962E98A4267F747F40CEB24CD6D9E349DD13666121E8E40741278C5C0B6BD6F8BE0141CB327B1CA95FC22C2C049DFC20E8849153615557AB19A35F08085A96C9BAC07852E7845958083AF941D009235B61C95F0A4E1FF56C40CE7E641D7F4DB8F112666121E8E40741278C8C85E575C615338AD5D7C3EE0948D98E8C91B174D3F54F988585A0931F049D30D21556B6AE3953E8A6EB9F300B0B41273F083A61A42BAC5CBAE64C91C7DADB23B927CCC242D0C90F824E18E90ACB966E6D636F8FE49E300B0B41273F083A6150586E25CCC242D0C90F824E1814965B09B3B01074F283A0130685E556C22C2C049DFC20E8844161B995300B0B41273F083A6150586E25CCC242D0C90F824E1814965B09B3B01074F283A0130685E556C22C2C049DFC20E8844161B995300B0B41273F083A6150586E25CCC242D0C90F824E1814965B09B3B01074F283A0130685E556C22C2C049DFC20E8844161B995300B0B41273F083A6150586E25CCC242D0C90F824E1814965B09B3B01074F283A0130685E556C22CACDA0ADA1B5FE2A5C05E9E0A82762B083A6150586E25CCC2AA83A0D5FA64143582762B083A6150586E25CCC2AA87A0338A1A41BB15049D30282CB71266616D044107448DA0DD0A824E187115D6840913D4F4E9D303CB972E5D1A5826F9E69B6FD4175F7CA16FCB6BAEA8A8088C49CDA44993D4975F7E19589E9A810307AA65CB9699FBC3870F572B57AE0C8C8B326116D64614B41175DFBE7D6317F4E2C58B554949496079BAAC5AB54A0D193224B03C5DC68F1FAFA64D9B16589E2E3FFEF8A3FAE0830F02CBA30E824E187115D6F5D75FAF4E3BED34F5D65B6FA9E6CD9B9BECBAEBAEAAA8A82830BEB8B858EDB0C30E6AE1C285EA8E3BEE50E79F7FBE5EFEF5D75F9B31B26EC99225FAF6CC9933F5F8D9B3679BF5A93296B468D142DD76DB6DE6FE534F3DA54E3FFD747D7BFEFCF9AABABA3AF03AC24E98859546B01B2D71BC8F7C798A748F3CF248251F16FE3A397EF678C92BAFBC22FB577DF2C927817576E4437EE79D77AEF1BB9596969AF785DD249C73CE39FABDE9DF4F7D6F4615049D30E228AC79F3E6E937BE74C5BD7AF552B366CDD2CBAFBEFA6A1DBF00A64E9DAADFF4679C718696F976DB6DA7257EE08107AA030E38405D70C105BAD8641B32FEDE7BEFD5E3AFB8E20AF5A73FFD49AF3BEFBCF3D445175DA465BCFBEEBBABA143879AD7D1AA552BF5DA6BAFA9FBEFBF5F5D7CF1C5667B727BAFBDF6521D3B768C5CD261169688D45EB6216C09A7A4A430E6290EF9A623C7488E95C47B29E6D849E4BD922A6CC9EAD5ABD5A1871EAA76D9651775E5955706B629F295F789BCC74E3EF964FDDE916D6EBDF5D67A9934059B6EBAA9EAD0A1837E5FFCEB5FFF52471F7DB4692E8E38E208FD1EFBE31FFFA8EF6FB6D966EAB1C71E0B3C4F9841D00923EAC2923776EBD6ADD5E38F3FAEFAF5EBA7F6D8630F5D18CF3FFFBC7EF3FFF7BFFFAD31FEBEFBEE53471D7594DA7EFBED75B1C81B5F7EFAB7E5F10F3DF4901EFBDBDFFE5677DAFE63A5483FFCF0437DBB67CF9EAA4B972EAABCBC5CBF79FDC7366DDA54CB5EBAB1FDF7DF5FDD75D75DEAC5175F8C6DAA23CCC2DA08823662F6894BD0D2A99E75D659FAB63CB77CD8FBEB5E7AE925FDE12A531FA98F79E08107746320536BD271DF7AEBADAAAAAAAAC618691EE43D7AE9A597EA0F70B93D72E448FDC16FFF8ED28D376BD64C4F6FF8CB64FCE79F7FAEBA76EDAAE6CC9953637C1441D009C37ED3859DDEBD7B6BB91E7EF8E16AABADB6D26FA4071F7C509D70C209AAACAC4C151414E88E590A45C61F72C821EAE5975F5673E7CE559595957A9974DC32952153212D5BB634C5B960C1025D787E17B5C5165BA80B2FBC50DF16C18F1933C6BC0E11F06EBBEDA67AF4E8A13BABCE9D3BAB6BAFBD56CF8D4BC73460C080C06B8F226116563D041D10B34F5C82FEFEFBEF8D80E53D20DF98FC7532D53576ECD81ADF7EE4835ADE6F72DE41EECF983143EDB7DF7EFABD26F3D7A9A216F9CBD8C993279BB1F2C12D9DF79D77DE69C6BDFAEAAB5AD0B28FDAB76FAF4E39E514DD1448972EDDF7DFFFFEF7C0EB0E3B083A61445D58721250A619AEBAEA2AD5AD5B375D5CD2018B2465FD9A356BD499679EA9A71EE4BE74BC5228F2F5D117AFE4A0830ED25313323E75FB225D798CDC9682F2A52EB745E0FE38E9DABD5F5F2F97E793DBF2A1D1A44913F5E4934FEA0F0BFBB54791300BAB0E82CE28669F38049D3A152111999E74D24935CE656CB9E596662A423E6C77DC7147B5CF3EFBD4780F1D76D861E6DBD8F1C71FAF56AC58A1AEB9E61AD5A95327F5EEBBEFAA471E79443F9F4C53C863A533FFFDEF7F6F5E87085AA63DA40978E18517F487BE4C718C1B374EAFFFEEBBEF02AF3DEC20E88411656149A4F395AF9F071F7CB0BAF9E69B7507225F25FDA291AFAD32ED2027F9FCC748572B9D89485DA6472EB9E4123D3DF1DC73CF05B6FF9BDFFC467F1D9522950E5AB6EFDF4E3D7174C30D37A8CD37DF5C3DFCF0C37A7AE5B3CF3E53975F7EB9FE6A2A73D9227ABF838A326116566D059D0B71085AF2C30F3FE89F224FBF7B96E32BEF93D4E3D6A74F1F75D34D37E96F60FEF197F7DEE8D1A3F56D592EC2F7D74BE72DCBA5A3966F758B162DD252966F71B2DC6F2424F2FE93F78CBC6F8F39E618FD3E93E797F96B79DF356EDC58F5EFDF3FF0DAC30C824E1851179674D032D72B2769E4ABA5CCDFC95CDD1B6FBCA1DFE0F67889743A22CCD40E49AED09002F02FBDF3231DB11487148DACF7A738E4B67F32523A6C293EE9C2A480E535B569D346CF77BFFDF6DBBADB1A356A54E0754491300B2B498296883CE57D21536422D73FFFF9CFEABAEBAE0B8C13D94A33E0BF77B6D9661B7DB58E3403F27EF13B5E3B4F3FFDB43EFF21EF157BAE5A22531812797FBDF9E69B66993412F6D8A882A01346D48525530E320F28575EB46BD74E9FF19665F206F705BD7CF9F21AD7434B473268D0A01ADB91F57296DCDEBE74C4FE09BE9D76DAC94C71C8B485DF75C9EF2C2705A51397133D5260C3860DD3F3E3F2E121859BEE1AED28126661254DD0224DF9801691CA151DDECBD15314A9E71AFCC83737FF32CBD40E7A43910E79934D36D173CCE9AECF97E98D8F3FFE58BF7FE48A11B90E5ABEBDC9948B4C914D9932C55C6114551074C288BAB0E42A8B7DF7DD579F5197793B7F6A43E60065FE4E6ECB7CB348D217AD9C7C39F1C4136B74D0521CDECBDFE06570D265A7CE3BDB91F96FF9EAFAEDB7DFEAA913F9C090134F83070FD667FBA5C0ECC7849D300B2B698296632FD313975D76993E29F7D5575FE96E5A8EBBBC47E4FA68FB31125BD076072DDFECCE3DF75CDD3CC807B974C4B24DB97CB37BF7EEEA89279ED0DFFA4E3DF5543D5E2E01DD76DB6DF5FB51CE8BC8554072525A5E935C3D643F7F9841D009238EC24AFDBA28737F1B92AC44A62C641E3A759974347206DE3E49981A399B2E67FBEDE57E64FE502EB592934976D7258526974BD98F093B61165652042D9D70DBB66DF5FB42AEBE912E3675BD9C9C93292B99F690692DF9F04D3D3928329506406ECB34975CDE2957F3C87B4C96C9E598F25784A9DB944E5DAEEE906641E6BD45BCBED865F9A38F3EAABFADC9949A5C81247F952A8296F796FDFAC30C824E185116565D93A913CA96D4133AE9B221B9C795300B2B2982AE6DE45B542EC73A5BA3909AD426A3368F0B3B083A61B85C580D31611656431574430A824E1814965B09B3B01074F283A0130685E556C22C2C049DFC20E8844161B995300B0B41273F083A6150586E25CCC242D0C90F824E1814965B09B3B01074F283A0130685E556C22C2C049DFC20E8844161B995300B0B41273F083A6150586E25CCC242D0C90F824E1814965B09B3B01074F283A0130685E556C22C2C049DFC20E8844161B995300B0B41273F083A6150586E25CCC242D0C90F824E1814965B09B3B01074F283A0130685E556C22C2C04BD2E8DD6FF47B1B589BD0D5783A013463E15564348988585A0D7A5512D855BDBF1710641278C7C2AAC8690300B0B41AF4BA30CC2ADED721783A013463E15564348988585A0D7A55106E1D676B98B41D009239F0AAB2124CCC242D0EBD22883706BBBDCC520E884914F85D51012666121E875699441B8B55DEE621074C2C8A7C26A0809B3B010F4BA345A2F5CF9992DA9E3F321083A61E453613584845958087A5D1A65106E6D97BB18049D30F2A9B01A42C22C2C04BD2E8D3208B7B6CB5D0C824E18F954580D21611616825E974619845BDBE52E0641278C7C2AAC8690300B0B41AF4BA30CC2ADED721783A013463E15564348988585A0D7A5512D855BDBF1710641278CA2A2A25FABAAAA02079A441FEF382CF40AABDA3E461B0B04BD2EDECBAE75EC6DB81A049D30CACACA16565656060E34893E73E6CCE9EF15D658FB186D2C4212F42FBE10AAABAB03BF13892E2B56AC4815F44FF6B1823CA4B8B8B8556969E9CA8A8A8A2574D2F1C4DBEF15B367CFEEE715D55C2F2DED63B4B10849D00B52BB36E24CCAEC6305798A77305B7A19EB656D9A039D1711F9D8CBF228B2DF65FF872667212441BF90E6F721F166CDF0E1C38FB78F15406C84219FA411C63EFAF4D34FB7F38430D4CBCF694441A2CDCF5E4A9133384718F2491AEC23008805E4931DF61100C402F2C90EFB08006201F964877D0400B1807CB2C33E028058403ED9611F01402C209FECB08F002016904F76D84700100BC8273BEC23008805E4931DF61100C402F2C90EFB08006201F964877D0400B1807CB2C33E028058403ED9611F01402C209FECB08F002016904F76D84700100BC8273BEC23008805E4931DF61100C402F2C90EFB08006201F964877D0400B1807CB2C33E028058403ED9611F01402C209FECB08F002016904F76D84700100BC8273BEC23008805E4931DF61100C402F2C90EFB08006201F964877D0400A1E389A64464932525F6E31A3A081A0042C7134D411A21DB29B01FD7D041D0001009D221A79132DDF30640D0001009D221A71133DDF30640D0001019D229A79133DD73061034004446862EBAC01E07EB40D000102956174DF7BC01103400448AD54517D8EBE1FF40D00010397E176D2F879AB08F002072FC2EDA5E0E3509631F8D1831E20C2FDF7A51C4892CF4D2BBA4A46457FB58411EA2946A5C5E5EFECE9831637E2A2A2AB20F368920DE7EFFB5ACAC6C617171712BFBF86C4C4212F454FBF7214E64987DAC200FF1E43CC09383AAACAC545555556AEDDAB524E2C87E97FD5F5A5ABAD22BAC96F631DA588424E85FD2C881C49F9FEC6305798874CE22075B1A24FA5454542CF10A6BAC7D8C36162109DA48C1FE7D48F4493D1EF6B1823C44A635E89CDD881C07AFB0AAED63B4B140D0C90F824E1814965B09B3B01074F283A01346AE85B57A45852A1FD7474D19D953476ECB327B1CA95FC22C2C049DFC20E884914B61AD5ABE404D1EDE4D4D1CFCD71A9165B2CE1E4FEA9E300B0B41273F083A61E45258F3A60C0CC8D9CFFC298302E349DD13666121E8E40741278C5C0A6B6A49AF8098FDC83A7B3CA97BC22C2C049DFC20E884914B614D1ED13D20663FB2CE1E4FEA9E300B0B41273F083A61E45258083ABA845958083AF941D0092397C292AB366C31FB9175F67852F7845958083AF941D0092397C29A31EAB98098FDC83A7B3CA97BC22C2C049DFC20E884914B612D5D30494DFEE8FE809C6599ACB3C793BA27CCC242D0C90F824E18B916D6ACF17D03829665F63852BF845958083AF941D00923A7C2AAAE563346BF1010B42C937581F1A4CE09B3B01074F283A01346B6C292BF149C3EEAD9809CFDC83AFE9A70E325CCC242D0C90F824E18190BCBEB8C2B6614ABAF87DD1390B21D192363E9A6EB9F300B0B41273F083A61A42BAC6C5D73A6D04DD73F611616824E7E1074C2485758B974CD99228FB5B747724F988585A0931F049D30D215962DDDDAC6DE1EC93D611616824E7E1074C2A0B0DC4A988585A0931F049D30282CB712666121E8E40741270C0ACBAD845958083AF941D00983C2722B611616824E7E1074C2A0B0DC4A988585A0931F049D30282CB712666121E8E40741270C0ACBAD845958083AF941D00983C2722B611616824E7E1074C2A0B0DC4A988585A0931F049D30282CB712666121E8E40741270C0ACBAD845958083AF941D00983C2722B611616824E7E1074C2A0B0DC4A988585A0931F049D30282CB712666121E8E40741270C0ACBAD845958B515B437BEC44B81BD3C1504ED561074C2A0B0DC4A9885550741ABF5C9286A04ED561074C2A0B0DC4A9885550F4167143582762B083A6150586E25CCC2DA08820E881A41BB15049D30E22EAC193366E89F1F7CF0815AB4685160BDA4B4B4542D5DBAD4DCFFE69B6FD4CC993303E3523369D224F5E5975F0696A766E0C0816AD9B265E6FEF0E1C3D5CA952B03E3A24C9885B511056D44DDB76FDFD8043D72E448B570E14273FFFBEFBF571F7FFC71609C9DFFF99FFF512B56AC082CB7336EDC383579F2E4C0F274993061829A3871626079D441D009238EC2F2337AF468B5EDB6DBAAF1E3C7AB9B6FBE59F5EEDD3B3046F2873FFC415D7BEDB5FAB608F5DE7BEF55279F7CB2AAAEAED645E98F93625DB26489BE2D02DF61871DD4ECD9B3CDFA54194B5AB468A16EBBED3673FFA9A79E52A79F7EBABE3D7FFE7CBD7DFBB5849D300B2B8D60375AE2781FFDF5AF7F55050505AAAAAA4ADF970FFB4D37DD547DF2C92781B1A969DAB4A9EAD4A993FAE31FFFA8FAF7EF1F58EF471A819D77DE59FDE73FFF31CBA64E9D6ADE63928A8A0AFDB3BCBC5CEDB1C71EEAABAFBE32EBECF75B1441D009238EC2F273F9E597ABCE9D3BEBDB1F7DF491BAFAEAAB03633EFFFC73B5C9269BA833CF3C5317E3E1871FAEB6DB6E3B75F4D147ABCB2EBB4CEDBDF7DEEAF1C71FD76345DCE79C738EBAE28A2BD49FFEF4277983AAF3CE3B4F5D74D1455AC6BBEFBEBB1A3A74A8D976AB56ADD46BAFBDA6EEBFFF7E75F1C517AB0B2EB8403F466EEFB5D75EAA63C78E914BDAA5C2B2259C92924207A638EEB9E71E75C71D77A8CACA4A7D7FCE9C396A9B6DB6D1B737F4017BE08107AAE2E262555656A6B6DE7A6B23E037DF7C53356FDEBC46BC5F516DB6D966E6BEBC874E3DF5542D69F920D86FBFFD549B366D747EFBDBDFAAB66DDBEA7D24EF2179EC98316302CF1F661074C288A3B0245220FBEFBF7F8D2EE384134E50F295D9BF2FD30D22E4C18307AB0B2FBC503DFBECB3FA4DFFF2CB2FAB010306E86E570AD1EFA0A44064BBFEE345E41F7EF8A1BEDDB3674FD5A54B17DDE9C8EF2CC5261D8F7453071C70809A366D9A7E3D77DD75977AF1C517639BEA70A9B03624669F38042D2215011E7CF0C1FA987B2F43FDEE77BFD31FB022D3D40F58991EBBE4924BF4323FF2ADEDB4D34ED3B70F3AE820B5C5165BA85B6EB945BF8FE4FDE43FCF3FFEF10F3DC67E7E894C91C8F34A648C74DADB6FBFBD7E5FF97296C87BD77E6C9841D00923CAC2F223452085217388A9CBA5DBD871C71DD50D37DCA0A73D162C58A04E3AE92475ECB1C7AADD76DB4D17D54E3BEDA40B51BA5F290AE960E4EBAA3C5EC61F79E491A610A5F044EC725B8A27B59B1101CB367BF4E8A156AF5EAD3B79994691B944E9AAE403C07EDD51C4A5C2DA90987DE210B488F4871F7ED0DF98A48396FB224C39FE7E07BD6AD52A335EA6B9FC6E5A8EB1F7B2D5AEBBEE5A634CBAF8EF09FFBE3D6521CF2939E69863F43737F93676D65967A9DB6FBF3DB0ADA882A01346948525993B77AE9EAA90AEC6FE3A79C82187E82989238E38424F7FC8091AE976DE7AEB2D3DA5913A56BA5DF98A2B531FA9277244BAD225CBED5D76D9C57CFD95DB52C0FE38E9ACBC5F5F2F976DC86DE9D69B3469A29E7CF249FDF5D77EED51C4A5C2DA90987DE210B444A47CD34D37A9C30E3B4CBF17448C7E072D3F6579EA5CB1444E1C8BC0A509F0BF91D9DB4DCDF9E79FAFBF5DF91FF822F5D46F687EBEF8E20BDD546CB5D556EA94534ED1EF41E9DE6DA14711049D30A22E2CE95045D26BD6ACD14526B29529055927B75F7DF555DDD1CA7DE97AE4C49FCCF54951A57E4D952290AF8FFE583FBFF9CD6F743723DB920EBA59B366E676EAD75729A8CD37DF5C3DFCF0C3EAF9E79F579F7DF699FE50E8DAB5ABEECC64FBB99EC1DF98C9B7C28A43D0FFFEF7BFF5F4947C785F73CD35FA7DF2EEBBEFEA6F43B2FEFAEBAFD71FDEA98FF9F1C71FF589E5FBEEBB4F7F7B1B346890DA73CF3DD5D8B16303DB97C887B9BC67FCDF4BDE1FF29EF0A7D324723588CC3D4B972DB297F759BF7EFDD4B7DF7EAB05FDF6DB6F679C070F2B083A6144595876A4C391298BEFBEFB4EDF97932FE9A616468D1AA58E3BEEB81ACBA438FCC7A5463A6291B248BC71E3C6668A436ECF9A354B8F910E5BE6BBE5C4619F3E7DF4257C526852BC5254F26120CF696F3B8AE45B61C52168995678FDF5D7CD14872C930F7C39A67265909CC84BFD3096FCE52F7FD1DFDA44B0325F2DDF90E49B999CA778E59557B4C053C78BECA533F7852CEF0B9962F3D7CB151EF2BE4AFD5627536E32C5E6DFDF72CB2D55870E1D229534824E185116969DEEDDBBD7B87243CEAEA7BB8E558A492E994B2D06F94A7BE28927D6E86824D211FB27F844FEFE14874C5BC8BCA5DC96DF594E0A4AC14A714AA10D1B364C5FE6E77F5D9E3E7D7AE07544917C2BAC3804ED2755D01239A92752B4A72EE4C4EF95575E69E69CFDAB38E4F63FFFF94F7D95903407FE78E996653B726551EA73B56FDFBEC676FDF793BC77E464A54424FEB7BFFD4D2D5FBEBCC6D8A882A013461C852579E289279414850854BA95071E7840CFFFA6FB6395A2A2A280A0E5C48C9CC0B2C7A6461E933AEF6CA765CB96FA8A10F94ADABA756BD5AE5D3BB578F1623D7522DDD0942953028F093BF9565871085A8EA95C1A2973C477DE79A73E66725FCE53C8D518FBECB38FBE2F827DEFBDF7D44B2FBD54E3F1FBEEBB6F0DF9CAA597FE1FAE4833201FD2328D229DAF74C0F25E9539ED679E79A6C676E4E4A39CA096732AD2518B9C65EAA45BB76E7ABE5ADE5FD284D8AF3FCC20E88411656149E44D2FDDCCA38F3E6AE68FE52FFEA4B8DE78E38DC0788914935CB591BAECFDF7DF37738E9972E8A187D6F843163B32E77CEBADB7EA22B4AF579502976BB0EDC7849D7C2BAC38042D913967B94452E6A0E538CA372199E690752259F91097E36A3F4E22D365F25782F6F2AFBFFE5ABFCFE43C89BF4C247CD45147E9E5A9271DE5FD77DD75D7D5F8BDE50FAAFC93CBF20D4D3E3C4A4A4A02CF13661074C288BAB0EA12BFF06A1BFB04A29DBA6E37CCE45B61C52568893DBD956B6A7BDC739D43CEF67E8B22083A61C451582473F2ADB0E21434090641270C0ACBADE45B612168B782A0130685E556F2ADB010B45B41D00983C2722BF9565808DAAD20E8844161B9957C2B2C04ED561074C2A0B0DC4ABE151682762B083A6150586E25DF0A0B41BB15049D30282CB7926F8585A0DD0A824E1814965BC9B7C242D06E0541270C0ACBADE45B612168B782A0130685E556F2ADB010B45B41D00983C2722BF9565808DAAD20E8844161B9957C2B2C04ED561074C2C8A7C2927F2D4CFE1B2AFB5F0DABED7297936F8585A0DD0A824E18F95458225BEF2507FEAFC0DA2E7739F95658F92868EF65D73AF6365C0D824E18F9545899845BDBE52E27DF0A2B5F056D2FDB506A3B3ECE20E884914F859549B8B55DEE72F2ADB09224E8DA2E7731083A61E4536165126E6D97BB9C7C2B2C04ED561074C2C8A7C2CA24DCDA2E7739F9565808DAAD20E884914F859549B8B55DEE72F2ADB010B45B41D009239F0A2B93706BBBDCE5E45B61E5B3A0E567B6A48ECF8720E884914F859549B8B55DEE72F2ADB0F259D0766ABBDCC520E884914F859549B8B55DEE72F2ADB010B45B41D009239F0A2B93706BBBDCE5E45B612168B782A013463E155626E1D676B9CBC9B7C242D06E0541278C7C2AAC4CC2ADED7297936F85952441674A6DC7C719049D308A8A8A7EADAAAA0A1C68179349B8B55DEE6ABCE3B0D02BAC6AEB10394DBE0ABAB6B1B7E16A1074C2282B2B5B5859591938D02E26D3BF4E57DBE5AE66CE9C39FDBDC21A6B1F2397F15EEF2FBE10AAABAB03BF13892E2B56AC4815F44FF6B1823CA4B8B8B8556969E9CA8A8A8A25F9D249272DDE7EAF983D7B763FAFA8E67A69691F2397F15EEF82D4AE8D389332FB58419EE21DCC965EC67A599BE640E7450A0B0B03CBF228B2DF65FFE7959C05EF35BF90E6F721F166CDF0E1C38FB78F15406C88A0ED65103E9F7EFAE9769E10867AF9398D2848B4F9D94B297206E740D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A82060070004FC62522E42C29B11F07000021E3C9B7208D90ED14D88F03008008900E398D94E99E0100E2463AE43462A67B060070810C5D34DD330040DC64E8A20BEC710000100356174DF70C00E00A56175D60AF07008018F1BB687B390000C48CDF45DBCB0100F21AA554E3F2F2F277C68C19F3535151911A3162048938DE7EFFB5ACAC6C617171712BFBF8004003C693F3004F0EAAB2B252555555A9B56BD7928823FB5DF67F6969E94A4FD82DED6304000D14E99C450EB63448F4A9A8A858E2097AAC7D8C00A08122D31A74CE6E448E8327E86AFB1801400345E6406D5190F822C7C33E4600D040C955D0AB5754A8F2717DD494913D75E4B62CB3C791FA05410380211741AF5ABE404D1EDE4D4D1CFCD71A9165B2CE1E4FEA1E040D00865C043D6FCAC0809CFDCC9F3228309ED43D081A000CB9087A6A49AF8098FDC83A7B3CA97B103400187211F4E411DD0362F623EBECF1A4EE41D0006040D06E05410380211741CB551BB698FDC83A7B3CA97B103400187211F48C51CF05C4EC47D6D9E349DD83A001C0908BA0972E98A4267F747F40CEB24CD6D9E349DD83A001C0908BA025B3C6F70D085A96D9E348FD82A001C09093A0ABABD58CD12F04042DCB645D603CA97310340018B2095AFE5270FAA8670372F623EBF86BC28D17040D00868C82F63AE38A19C5EAEB61F704A46C47C6C858BAE9FA07410380219DA0B375CD9942375DFF20680030A413742E5D73A6C863EDED91DC83A001C0904ED0B6746B1B7B7B24F720680030A41334892F081A000C08DAAD206800302068B782A001C080A0DD0A8206000382762B081A000C08DAAD206800302068B782A001C080A0DD0A8206000382762B081A000C08DAAD206800302068B782A001C080A0DD0A8206000382762B081A000C08DAAD206800302068B782A001C080A0DD0A8206000382762B081A000C08DAAD20680030B820E877DE79472D5EBC38B0DCCEA44993D4975F7E1958BEA10C1E3C585555550596575757AB993367D6583674E8D09C5E479841D00060884BD07DFBF6555DBB76558B162D52471E79A47AE491470263ECCC9A354BEDB9E79EEADD77DF35CB3EF9E493C038C9FCF9F3F5B6B7DD765BF5F4D34FAB65CB96D5582F823EE9A493D4EBAFBF6E965D79E595AA65CB96816D4519040D0086B8047DD96597A9B3CF3E5B2D5FBE5C1D73CC316AD0A0417AF98A152BD437DF7CA36F4F9F3E5D8FBBF8E28BD5C9279FAC7FEEB3CF3EEAB0C30ED3CB5BB468A136D9641375F3CD37AB912347EAF512592E623EE79C73F4FA0B2FBC503FAE4B972E355EC3CB2FBFAC9FDBBF7FC51557A87BEE89F77F2547D000608843D0AB57AF563BECB0833AF1C413B55077DC714775CA29A7E8DBD24DEFBDF7DE66FA61EEDCB96ACD9A35EA9FFFFCA7BAF1C61BCD364E3DF554F5C61B6FD4D8AE3CA669D3A66AC68C19EAF3CF3F578D1B37D6E38E3DF658B5EBAEBBAAFDF6DB4FBDF0C20B66BC74E4E3C68D33F72FBAE822D5B973E7C0EB8D32081A000C7108FA95575E51EDDBB737F78F3BEE38D341DB59BA74A9FE2953145B6FBDB59A30618296D821871CA22A2A2AD4D8B163CDD8E2E262B5DB6EBBA9134E384124A70E3AE820BD4C3AE9B2B232D5AC5933FD3CAFBDF69AFE3010993FFCF0C3E6F1A79D769ABAE4924B02AF21CA20680030442DE855AB56A9D34F3F5D2D58B0C02C4B15F4F8F1E36B8CEFD7AF9F3AEAA8A354F3E6CDB574CF3DF75CB5FFFEFBABA38F3E5A4F5D6CBEF9E67A8A43C676EAD44975ECD851DD7DF7DDAA7BF7EE5AB8D2414BF72CB745DEF23CD2912F59B2440B7BC08001E6B9F6D8630F3D2F6DBFE62883A001C010B5A0274E9CA8BB5A3941E8CF19FB531C32C520D312DDBA7533E345A0B948B3BCBC5C3569D2A486A0A59396CED9EEA0FDC7F882FEE8A38FF4C9429976B9E69A6B6A74E55107410380216A41FB910ED6BFB26243531C224E11A9BDDCCE8B2FBEA8E78F7D41DF77DF7DEA80030ED0DDBADD41FB8F91ED5E75D555AAA0A040DD7EFBED5ACEF27CB2CCDE7E5441D00060884BD0A9B105FDC5175F18798B3825F663D245242DF3CA071E78A0BAE9A69BD476DB6DA77EF8E1878C1DB474E632AD215780C8551E72D5C8CA952BD55E7BED5563EA23CA20680030442D68119FCC27A7C6BFA2C3BF2F531EE79F7FBE96F411471CA1A64E9D1AD84EBA3CFBECB3BA837EFBEDB7D559679D65A64A44D0728DF3E1871FAE860C1962C6DF75D75DAA478F1E7A8E3B753FBCFAEAAB6A8B2DB6500F3DF450E039C20E82060043D482963F1099376F5E6079BA3CF9E493EACD37DF0C2CCF14993B962E58E6B8A583F6FF82504E1EF6EAD54B4BDBBF2A4422B296698DEFBEFB2EB02D91F3071F7C10581E7610340018A216746D2232B797253D081A000C2E0BBA21064103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E05410380219F042DFF1BF8E4C993F5CFFA2C7739081A000CF9246891ADF792F5CFFA2C7739081A000C08DAAD206800302068B782A001C080A0DD0A8206000382762B081A000C08DAAD206800302068B782A001C080A0DD0A8206000382762B081A000C08DAAD206800302068B782A001C080A0DD0A820600435151D1AF5555550151B8984CC2ADED7257E31D87859EA0ABAD4304000D95B2B2B2859595950159B8984CFF3A5D6D97BB9A3973E6F4F7043DD63E4600D040292E2E6E555A5ABAB2A2A26249BE74D2498BB7DF2B66CF9EDDCF93F35C2F2DED6304000D189182746E5ED6CA1C683EA6B0B030B02C8F22FB5DF63F720680E42182B69701008003206800004741D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300388027E31211729694D88F03008090F1E45B9046C8760AECC70100400448879C46CA74CF000071231D721A31D33D0300B840862E9AEE1900206E3274D105F63800008801AB8BA67B06007005AB8B2EB0D70300408CF85DB4BD1C000062C6EFA2EDE50000798D52AA717979F93B63C68CF9A9A8A8488D183182441C6FBFFF5A5656B6B0B8B8B8957D7C00A001E3C979802707555959A9AAAAAAD4DAB56B49C491FD2EFBBFB4B474A527EC96F6310280068A74CE22075B1A24FA5454542CF1043DD63E4600D04091690D3A673722C7C11374B57D8C00A0812273A0B628487C91E3611F230068A0E42AE8D52B2A54F9B83E6ACAC89E3A725B96D9E348FD82A001C0908BA0572D5FA0260FEFA6260EFE6B8DC83259678F27750F820600432E829E37656040CE7EE64F1914184FEA1E040D00865C043DB5A45740CC7E649D3D9ED43D081A000CB9087AF288EE0131FB9175F67852F7206800302068B782A001C0908BA0E5AA0D5BCC7E649D3D9ED43D081A000CB9087AC6A8E70262F623EBECF1A4EE41D00060C845D04B174C52933FBA3F20675926EBECF1A4EE41D00060C845D09259E3FB06042DCBEC71A47E41D00060C849D0D5D56AC6E81702829665B22E309ED439081A000CD9042D7F29387DD4B30139FB9175FC35E1C60B8206004346417B9D71C58C62F5F5B07B0252B62363642CDD74FD83A001C0904ED0D9BAE64CA19BAE7F10340018D2093A97AE3953E4B1F6F648EE41D000604827685BBAB58DBD3D927B10340018D2099AC417040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED56103400185C14745959995AB972A5B92FAF31F5BE9F2143860496A5E69D77DE518B172F0E2CB73369D224F5E5975F0696C711040D00863805FDE38F3FAA76EDDAA98B2FBEB84676DA6927D5B1634733EEA1871E52C71C734C8D31E79D779EDA628B2D0262EDDBB7AFEADAB5AB5AB468913AF2C823D5238F3C12785E3BB366CD527BEEB9A77AF7DD77CDB24F3EF924302E8A20680030442DE8912347AAE6CD9BEB9C76DA696AFBEDB757E3C68D5303070E54975E7AA91EB36CD9B21A8F79F4D14755EBD6AD6B2C9B306182DA7DF7DD03DBBFECB2CBD4D9679FAD962F5FAEA53E68D020BD7CC58A15EA9B6FBED1B7A74F9FAEC789E84F3EF964FD739F7DF651871D76985EDEA2450BB5C9269BA89B6FBE39B0FDB083A001C010B5A02573E7CE55858585AA4F9F3E6ACD9A355A8E471D75943AFCF0C3B5B877D96517555A5A6AC63FFEF8E3BAC3F5C52E39F3CC3303825EBD7AB5DA61871DD489279EA8A5BBE38E3BAA534E3945DF966E7AEFBDF7563367CE34AF419EFB9FFFFCA7BAF1C61BCD364E3DF554F5C61B6F045E735441D000608843D092B66DDB6A41CB6DEF65A8EFBFFF5E1D7AE8A16ACC98316ACB2DB7D4F2F4C73EF1C4133975D0AFBCF28A6ADFBEBDB97FDC71C7990EDACED2A54BF54FE9D6B7DE7A6BBD3DD917871C7288AAA8A85063C78E0D3C268A20680030B82068994B5EB2648916B588D316F4534F3D9555D0AB56AD52A79F7EBA5AB0608159962AE8F1E3C7D7787CBF7EFD74D72EDDB83CEFB9E79EABF6DF7F7F75F4D147AB0B2FBC506DBEF9E64C710040BCC429E8575F7DD517929E72D86CB3CD5475757540D04F3EF964D6298E891327AAE2E2627D82D03F91E84F715C74D145AA71E3C6AA5BB76E66FC800103D449279D14785D7107410380216A41CB656FEFBDF79E9E13DE6FBFFD54CF9E3DB5A08B8A8A54D3A64DF51811B474D4FE6344D0D93A683FF238FF24E386A6385E7FFD75D5AC59B3C0F2B883A001C010B5A0658E594E02F6EEDD5B9FD4935C7BEDB5EA861B6ED042956EB755AB56FA123CFF317292305741A7C616F4175F7C61E47DFBEDB7EBD88F893B081A000C510B5A326DDA34735BFE00E5EEBBEFD65311D25DCB34C536DB6CA35E7AE92533A657AF5E69A73876DD75573346A62C52D74BFC2B3AFCFB32E571FEF9E76B491F71C4116AEAD4A981D7167710340018E210B49F4F3FFD545F73FCCC33CFD4987396BF00F44F204A1E7EF8E11AF3C712E9A053A72864EE7ADEBC7981E74817993279F3CD3703CB5D08820600439C82CE35A9F2F65355551558966B44E6F6325782A001C0900F826E4841D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E054103800141BB15040D000604ED561034001810B45B41D0006040D06E05410380A1A8A8E8D7AAAAAA802848F4F18EC3424FD0D5F6310280064A5959D9C2CACACA802C48F49933674E7F4FD063ED6304000D94E2E2E256A5A5A52B2B2A2A96D049C7136FBF57CC9E3DBB9F27E7B95E5ADAC708001A302205E9DCBCAC9539D07C4C61616160591E45F6BBEC7FE40C00C943046D2F0300000740D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A8206007014040D00E028081A00C05110340080A3206800004741D000008E82A001001C05410300380A82060070004FC62522E42C29B11F07000021E3C9B7208D90ED14D88F03008008900E398D94E99E0100E2463AE43462A67B060070810C5D34DD330040DC64E8A20BEC710000100356174DF70C00E00A56175D60AF07008018F1BB687B3900004448FBF6ED77F4647C799B366D9EF17E167999E5A57A7D07FDE3FAFB45EBD75F2EE3ED6D0000C046A46DDBB6CD3CE1FEC7CBDAF532CE3532FE3FF2787B9B0000500F3CB19EEA09F6B334E2AD4B3E93EDD9CF010000B5A07DFBF64DDAB469F32F4FAABFDAA2EDDAB5AB7AEBADB7D4175F7CA166CE9CA9962E5DAA04F929F765B9AC9771F663657BB25DD9BEFD9C000090054FA24DBD4E7762AA58AFBCF24AF5D24B2FA9F9F3E76B19E78A8C97C7C9E32D517F25CF633F37000064C013F3A15E16A4CAB457AF5E6ADEBC79B67B6B853C5EB663497A9E3C9FFD1A0000C0627DE76CE42C5DEFC081036DD7D60BD99ED54DCFA3930600D80032279C3AAD71DD75D7A92FBFFCD2F6EB4641B62BDB4F91F457CC4903006460FD0941D3398725671FD97E6A272DCF6FBF26008006CFFA4BE97EF1653968D020DBA7A120CF93D245FFC225780000168529D739CB89BC28B14E1C7E66BF36008006CB15575C715EEAD4467DAFD6A82DF27CA9531DF27AECD70800D020295CF7E7DB5A8E72BD721CC8F3A674D1FFB15F23004083C3EB5C772A4CF9B735A2EE9E7DE4795304BD565E97FD5A01001A149E0C2FF7C5287F961D27D69F855F6EBF560080068527C2677D29FEFBDFFFB69D1929F2FC29827ED67EAD00000D8AB66DDB16FB521C3F7EBCEDCC4891E7F75F8BBC2EFBB5020034283C19CEF5A5585E5E6E3B3352E4F9533AE8B9F66B05006850789DEA0FBE14972D5B663B3352E4F9533AE81FECD70A00D0A0F064F8BFBE147FFEF967DB999122CF9FD241FFAFFD5A01001A1474D000008E2273BDBE14998306007008AEE20000709442AE83060070934287FE92F0965B6E49FDCF69F94B420068D8F06F710000384C21FF9A1D00809BB8F0EF41B76DDBD64C6FF0EF410300A450C8FFA80200E026FC9F8400000E13C7FFEA9D3AB5C1FFEA0D009081F6EDDB37F144F9952FCCEBAEBB2E3449CB76BDE7331DBB3CAF3CBFFD9A0000603D9E289B7A9997DA490F1C38D0F66BBD90EDA576CEEB9FAFA9FD5A0000C0C293E7A1A99296C889BCFA5EDD218FB74E086A39CBF3D9AF01000032B0BE9336D31D12E9A6E57AE5F9F3E7DBEEDD20325E1E6775CD7A5A439EC77E6E0000C882CC09AF3F71688B55FF59F85B6FBDA5BEF8E20B3573E64CB574E9522D63F929F765B9ACB7FE7CDBCFAFB25DE69C01FE7F3B776C02200C04007005977203219699C941DCC0DE2DDCC2DA7F0C16568236C21D3C21E4F3E5579FC04B6D04EF9A937E19AB513A808F4563EDC7F359F8F577C7C3C8FC39EFDF6B02F0A15A6B170D7728A54CB12E115BC4DE9A71AEB95FDAF990F9F71A0000000000000000000000C0FF1C502F75B9C9541FE10000000049454E44AE426082, 1);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3006', 1, '安全交底.bpmn', '3005', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3007', 1, '安全交底.safe_disclosure.png', '3005', 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, 1);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3010', 1, '技术交底.bpmn', '3009', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3011', 1, '技术交底.tech_disclosure.png', '3009', 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
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3014', 1, '技术方案.bpmn', '3013', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3015', 1, '技术方案.tech_plan.png', '3013', 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
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3018', 1, '项目预算.bpmn', '3017', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3019', 1, '项目预算.project_budget.png', '3017', 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
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3022', 1, '成果归档.bpmn', '3021', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3023', 1, '成果归档.achievement_archive.png', '3021', 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
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3026', 1, '项目结算.bpmn', '3025', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3027', 1, '项目结算.project_settle.png', '3025', 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
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3030', 1, '项目变更.bpmn', '3029', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('3031', 1, '项目变更.project_change.png', '3029', 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
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('4002', 1, '借款审批.bpmn', '4001', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('4003', 1, '借款审批.borrow_approval.png', '4001', 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
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('4006', 1, '保证金审批.bpmn', '4005', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('4007', 1, '保证金审批.deposit_approval.png', '4005', 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
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('5002', 1, '用车审批.bpmn', '5001', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('5003', 1, '用车审批.car_approval.png', '5001', 0x89504E470D0A1A0A0000000D49484452000001A90000027208060000007E3D3F2A00003F5F49444154785EEDDD09985C6599F6716590CD41100650181054967110914D769A2522444005920E082490409C018C10070789EC23380CE0C0202E6324B2445096842D24DD69A21008014C4C084948674FD3645F48272279BF739FC9A9EFF45B6F75576F55CFA9FAFFAEEBB9525D75AABA5277AAEE7A4F9DEE7CE4230000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000539E7B6983871E2B7468C18F1C28D37DEB8EC9A6BAE69F9CE77BEB3A9B6B6D60D1E3CF883A14387AE89CE7BE7E69B6FBE63C080017BFAD70700A0DB45E5B4CDF3CF3FFF8B61C386FD75E0C081EEBEFBEE73AFBCF28A9B33678E5BBE7CB913FDA9AF75BE2EBFE4924B3EBCE28A2B1A070D1A74AA7F7B0000748BA874FE355A19B50C1932C445AB28F7E1871FC6A5D41E6DA7EDAFBCF2CA0FFEE55FFEE58DBE7DFB7ECEBF6D00003A25EA998F8E1933E6A1CB2EBBCC3DFBECB3EE6F7FFB9BDF4345D1F574FDFEFDFBAFEBD7AF5F2FFFFB0000D02151B77CF4F1C71F7FF53BDFF98E7BFBEDB7FDDEE914DDCEC08103D79F77DE7997F8DF0F0080A269053578F060D7DCDCEC774D97E8F6060C18B0B64F9F3EA7F8DF13008076BDFCF2CBFFAA82EAAE15942FBADD4D175E78E1CA73CF3DF7F3FEF70600A0A0A843B6B9E5965B5AF419524F7AEAA9A7569E77DE79CFFBDF1F0080829E7BEEB99FEB28BECE1E24512CDDFEC0810397F6E9D3E744FF3E00009027EA8E2DAEBBEEBABFEAB0F152F8D39FFEB4AAB6B6F68FFEFD000020CFCB2FBFFCCD41830615FD73505DA5EF73FEF9E7AF3AF7DC73F7F0EF0B0000AD3CF0C00363F59B224AE9C61B6F9CD6B76FDFEFF8F7050080566EBEF9E6A5A5DAD59718376EDCF4DADADAC7FDFB0200402BFFF66FFFD6D2D8D8E8F7488F9A3973E6BCA8A45EF3EF0B0000AD0C1E3C78D38A152BFC1EE951CB972F5F1B95D462FFBE0000D0CA05175CE03EF8E003BF477A54F4FDD64425B5C1BF2F0000B472D965977D50EA95D4D2A54BDF6125050068D7D5575FBDA6D49F49BDF5D65B93F94C0A00D0AE6BAFBD7656A98FEE7BE289274671741F00A05D37DE78E31DA5FE39A9CB2FBFFC597E4E0A00D0AE010306EC3970E0C00F4BF81B27DE8D56514BF98D130080A25C71C515734BB5CB6FE4C8910FF2BBFB0000451B3468D0A9575E79E50725F82DE80BA3829ACD6F41070074C8E5975FFEC6B3CF3EBBC92F966EB4E9273FF9C9F0A8A49EF5BF3700006DD2FF98ABFFE2BDA7FE67DE175F7CF181A8A09AF89F7901009DD2AF5FBF5E175F7CF1FAE6E666BF63BA64DEBC79A3A3825AD2A74F9F53FCEF090040D1CE3BEFBC4BA215D59AEE5A516D5E412D8EE662FF7B0100D0615AF15C70C1052B9F7AEAA9959D3D984207496CFE0CEA5D565000806ED5B76FDFCF45ABAA3103070E5CAAFFF2BDD89FA38AB66B1E3972E4433A8A2F9AE7743BFE6D0300D02D74B878543613CE3FFFFCD537DC70C35FEAEAEAA6CD9C3973C1B265CBD6459DB4F6BDF7DE6B9C3E7DFAE4279F7CF2A92BAEB8E2B968DB65DA9EC3CC010025A3DF101195CFE06865A4DFBB37291AFDCC93DBFCE7A4CDE70FE6374900004C5049F9E701006002250500308B9202009845490100CCA2A400006651520000B32829008059941400C02C4A0A006016250500308B9202009845490100CCA2A400006651520000B32829008059941400C02C4A0A006016250500308B9202009845490100CCA2A400006651520000B32829008059941400C02C4A0A006016250500308B9202009845490100CCA2A40000264485345EA5D4CE8CF7AF0700408F8B0AA826504AFED4F8D70300A024B4520A1413AB280040F969A5142827565100001B0AACA658450100CAAFC06AAAC6DF0E0080B2F05653ACA200007678ABA91AFF720000CA2A594DF9E703005076C96ACA3F1F009071CEB9AD1A1B1B1F9D3871E25FEBEAEADCD8B16399124FF4B86F9A3061C292FAFAFAB3FC7C00A0AA4505F558F402E99A9B9B5D4B4B8BDBB8712353E2D1E3AEC7BFA1A16175545ABDFD8C00A06A6905A51748FF859329FD3435352D8B4A6A929F1100542DEDE263056563944354521BFC8C00A06AE93311FFC59229DF280F3F2300A85AC596D4BA554DAEF1B5E16EFAB89BE2D1699DE76FC7746D2829004829A6A4D6AE5CECA68D19E6A63CF3FD56A3F37499BF3DD3F9A1A40020A598925A387D545E4125B368FAE8BCED99CE0F25050029C594D48CF1B7E7955332BACCDF9EE9FC50520090524C494D1B7B435E3925A3CBFCED99CE0F250500299494ADA1A40020A59892D2D17C7E3925A3CBFCED99CE0F25050029C594D4EC97EECD2BA7647499BF3DD3F9A1A40020A598925ABE78AA9BF6C2F57905A5F37499BF3DD3F9A1A40020A59892D2CC9D3C22AFA4749EBF1DD3B5A1A40020A5A892DAB0C1CD7EF9677925A5F37459DEF64CA78792028094F64A4ABF5162D64BF7E4155432BA8CDF3AD17D434901404AC1928A56484DB3EBDD5F9EBF36AF98FCD136DA965555D787920280945049B5B77A2A34ACAABA3E941400A4844AAA98D553A1D175FDDB638A1F4A0A00524225E5174F47C7BF3DA6F8A1A400202554524CF986920280144ACAD6505200904249D91A4A0A005228295B434901400A25656B28290048A1A46C0D250500299494ADA1A400208592B235941400A45052B686920280144ACAD6505200904249D91A4A0A005228295B434901400A25656B28290048A1A46C0D250500299494ADA1A400208592B235941400A45052B686920280144ACAD650520090528E925AB56A955BB97265DEF99AF7DF7F3F7EA1F6CFD78C1B37CE353535E59D5F681E7BEC31377FFEFCBCF3356BD7AECD3BAFAEAECE2D5CB830EFFC520E25050029850AA12767EEDCB96EAFBDF672A79D765ADE1C77DC716EB7DD760B96D841071DE44E3EF9E4B8C8F4B5FE7CFBEDB77397AF5EBD3A7799E6A8A38E7277DD75577C7AC58A156ECD9A35B9CBEEBDF75E3778F0E056B7FFC31FFED01D7BECB1F1E93973E6E47DFF520C25050029E528A9C58B17BBADB7DE3AF775AF5EBDDCE8D1A3E3D3FAF3E8A38FCE5D76DD75D7C5E5A5728AEEAE3BECB0C37285F6A52F7DC9EDBAEBAE6EDAB469F1B653A64C71FBEEBBAF3BE38C33E2D979E79DDD91471E199F3EF4D043DD49279D94BBDDE5CB97BBADB6DACA3DF2C823EECC33CF8CB739E08003DCDE7BEFED4E3FFDF4F87B0D1B362CEFBEF7F450520090528E927AF7DD77DD165B6C912B935D76D9255726FA335D525A5169541C3FF8C10FE2A2B9FBEEBBF36E53F3D65B6FB91D76D821F7F5F1C71F9F2BBFDB6EBBCD0D1A34A8D5F60F3EF860FCE7BFFFFBBFC7A5B7FFFEFBBBCF7CE633EE90430E719FFEF4A7E3159FFF3D7A7A282900482957496DB7DD76B9AFDB5A4969468D1AE5F6D8638F78979D76C769F5A3F3274F9EEC366CD890DB6ED6AC596ECB2DB7CCADB476DA692777F8E187C7A7B54A4A4AEACE3BEF8C0B5197D7D6D63AED16D46EC6A4A4B46AD38AEA94534E71EBD6ADCBBBFF3D39941400A494A3A4162C58E076DC71C7DCD76D95940E64D0B62A8DA478B4D2D1E96DB7DDD65D7DF5D5B96DF53952312B297D36A5A28CFEFA71F1FDE637BFC9ADE4925D83FDFBF7CFBBDFA5184A0A0052CA515253A74E8D3F0F4A563CDADD97AC78F4A7BF92D27D4C0E8850F1242B29CD8C1933E2CF97747AF6ECD96D96D4C081037397E9F6A2BF7EFCE7934F3E19DF87E4FE68D53564C890BCFB5D8AA1A40020A51C25A5E25081245F6BB7DAD34F3F9DBB2C29291D429E14477A175EB292D2E8C009DD960E6BD7917E6DEDEEBBF0C20B73DF3329A986860657535313AFE692CB546894140018508E92BAEAAAABDCADB7DE9AFB5A9F01E973279D4E97943E6F5AB26449ABEBEAB3A3871F7E38EF36353ACAEFECB3CFCE7D9D5E493DFAE8A3EEF1C71FCF5DA69F938AFEFA6EBFFDF673C3870F672505001695BAA47420827EDE295D3E5AC9FCFEF7BF77FDFAF58B0BEBC4134FCCBB5E323AC8E181071EC83B3F342AA9A79E7A2AEF7C8D8EDCD3C11BCF3DF79C7BE28927722B2995A53EBB1A3A7468DE754A31941400A494BAA4B46A19316244ABF3EEBFFFFEF80089C6C64677CC31C7142C168D8A27D935D8DEE87075FD960AFFFC64F47355FA53ABAC4B2FBD343EAD1FF2D54A4A470EFADB976228290048297549A50F19EFCCB4B4B4E49D5768D6AF5F9F775E688ADDAE14434901404AA94B8A697B28290048A1A46C0D250500299494ADA1A400208592B235941400A45052B686920280144ACAD6505200904249D91A4A0A005228295B434901400A25656B28290048A1A46C0D250500299494ADA1A400208592B235941400A45052B686920280144ACAD6505200904249D91A4A0A005228295B434901400A25656B28290048A1A46C0D250500299494ADA1A400208592B235941400A45052B686920280144ACAD6505200904249D91A4A0A005228295B434901400A25656B28290048A1A46C0D250500297575759B5A5A5AF25E2C99D24F94C392A8A436F8190140D59A3061C292E6E6E6BC174CA6F4337FFEFC9151494DF2330280AA555F5F7F564343C3EAA6A6A665ACA8CA33D1E3DE346FDEBC87A3825A104D6F3F2300A86A7A61D43BF86836EA33912C4E6D6D6DDE79191A3DEE7AFC292800A8442A29FF3C00004CA0A400006651520000B32829008059941400C02C4A0A006016250500308B9202009845490100CCA2A400006651520000B32829008059941400C02C4A0A006016250500308B9202009845490100CCA2A400006651520000B32829008059941400C02C4A0A006016250500308B9202009845490100CCA2A400006651520000B32829008059941400C02C4A0A006016250500308B9202009845490100CCA2A400006651520000B32829008059941400C02C4A0A0060162505A0C39C735B3536363E3A71E2C4BFD6D5D5B9B163C732259EE871DF3461C28425F5F5F567F9F954124A0A40874505F558F402E99A9B9B5D4B4B8BDBB8712353E2D1E3AEC7BFA1A16175545ABDFD8C2A052505A0C3B482D20BA4FFC2C9947E9A9A9A96452535C9CFA8525052003A4CBBF85841D918E51095D4063FA34A414901E8307D26E2BF5832E51BE5E16754292829001D566C49AD5BD5E41A5F1BEEA68FBB291E9DD679FE764CD7A6524A2A2AA4F12AA57666BC7F3D0068A598925ABB72B19B3666989BF2CCF75B8DCED365FEF64CE7A7824AAA26504AFED4F8D70380568A29A985D347E51554328BA68FCEDB9EE9FC544A4989564A8162621505A078C594D48CF1B7E7955332BACCDF9EE9FC545849B5B59AAAF1B707803CC594D4B4B137E4955332BACCDF9EE9FC5452494981D514AB2800C5A1A46C4D059654683555E36F070041C594948EE6F3CB29195DE66FCF747E2AADA4C45B4DB18A0250BC624A6AF64BF7E6955332BACCDF9EE9FC546849A5575335FEE50050503125B57CF15437ED85EBF30A4AE7E9327F7BA6F353892525C96ACA3F1F00DA544C4969E64E1E9157523ACFDF8EE9DA547049D59C7BEEB915F97703D0838A2AA90D1BDCEC977F9657523A4F97E56DCF747A2AB5A422276CB3CD36FABB9DE05F000005B55752FA8D12B35EBA27AFA092D165FCD689EE9B0A2D29155373344337FF495101284EC1928A56484DB3EBDD5F9EBF36AF98FCD136DA965555D7A7024B2A29A8A498FCAF01A0B05049B5B77A2A34ACAABA3E155652850AA9D0F900D05AA8A48A593D151A5DD7BF3DA6F8A9A0926AAF88DABB1C00C225E5174F47C7BF3DA6F8A990922AB6808ADD0E40B50A951453BEA98092EA68F174747B00D58492B235192FA9CE164E67AF07A0D25152B626C325D5D5A2E9EAF50154224ACAD664B4A4BAAB60BAEB7600540A4ACAD664B0A4BABB58BAFBF600641925656B3256523D55283D75BB00B28692B235192AA99E2E929EBE7D00594049D99A8C9454BA403E1ACD459BFFEC8AD0ED505440B5A3A46C4D064ACA2FA8FF8D46F7597F76B6A8DABA1D8A0AA8669494AD315E527E6168E5A3FB9B8C5F30C54817543217B6DA22FFFB02A8169494AD315C52A1A208154C478A2A74FD5F6D3EDF17FAFE002A1D25656B8C96545B05112A9A628A2A74BD42059568EB7E00A8449494AD315852C51443A870DA2AAAD0F6ED1554A298FB03A0525052B6C6584975A41042C5132AAAD076C51654A223F70B40965152B6A6BD92AAADADAD8966BC7F7E0FE84C11840A285D54A1CB3B5A5089CEDC3F00594349D99A4225959453344EE35FDECDBA5200A122D2D75B04CEEF6C4125BA723F01640125656BFC92F2CBA90425D51D2FFCA1A29AE97DDDD5824A74C7FD05601525656B92922A544E3D5C52DDF9821F2AAAEE2EA84477DE6F009694ABA456AD5A15BF20275F2F5FBEDCBDF7DE7BF1E9F5EBD7BB75EBD6E52EFBE31FFFE8E6CD9B97771BC9F5FCF33453A74E756FBEF966DEF9E919356A945BB16245EEEB3163C6B8D5AB57E76D57CA193162844AA86039F56049F5C40BBD76F1F92B287DADF3BB5B4FDC7F00E556AE926A6969715FFEF297DDAF7FFD6BD7D4D4E466CD9AE5F6DA6B2F77DA69A7B9430E39C47DFBDBDF8EB753994D9E3CD9EDB4D34EEE89279E70175E78A13BE38C33E2F9EA57BFEAF6DC734FB778F1E278DB254B96B865CB96C5A7E7CC99E376D8618756E5962E24CDE9A79FEEAEBAEAAADCD777DF7DB73BE69863E2D38B162D721B366CC8BBDF3D3D7E199572A27F0E43FD7F1F5DD0D64A2A74D45F7718EAFF9D18A612C7FF875FD14A5D524B972E8D8BE66B5FFB9AFBEC673F1B97CCE73FFFF9B83076DE79E7789BC30E3BCC3DFFFCF3F1E9DFFDEE77EE84134E70DFF8C637DC6F7EF39BB89092D54E7D7DBDDB6FBFFD72B77DDD75D7B9134F3CD1F5E9D3C79D7DF6D9F10BE229A79CE2BEFEF5AFC7B7BFEBAEBBBAE79E7B2EB7FD59679D1597E4F5D75F1F97DEA9A79E1A5F47A777DF7D773768D0A09217551977F775E74A245450FE8AAABB8BAA3BEF7FD5EAA17F5BE846559751A94B4A3377EE5CF795AF7CC5353737BB912347C6A53063C68CB8A4DE79E71D77C41147E4B67DFCF1C7DDC1071FECDE7FFFFDBCDBF14B4A2B319D977CBDFDF6DBBBA79F7E3A3E7DD34D37B92BAEB8C2353636C645A015DB6EBBED1697A4CA72E6CC996E9F7DF671D75C738DBBFFFEFBCBB6DBAFCC074E74C70B7DA8A0F41954E8E8BEEE2AAAEEB8DFF84815BE006650D565548E92D26835356CD83077C10517B89B6FBED94D9932252EA93BEFBC335EDD24DB3DF9E493F1EE3FFFFA1ABFA4B4CA3AF0C00373BB033FF6B18FC52B369DFEC4273EE1264E9C98DB5625B4CB2EBBB81B6FBC31FEFCEBF2CB2F77175D74917BE38D37DC76DB6DE71E7BECB1BCEF578AF14B2AE197957F7937EACA0B7EA1826AEBE7A4BA5A545DB9BFF0F4F0BF2D7483AACBA8D425357AF4E87897DCA73EF529B7FFFEFBBB8F7FFCE3F1AAEA239B5FB4DE7AEB2D77F4D147BB356BD6C4DBEBE086624B4AA3E2D16A49A7557A5AAD25A793CFAE340D0D0DF1F7D3F9C71D775C7CFA0B5FF882DB669B6DDC5D77DDE5264C9890F7FD4A31854A2A9194957F7E37EBCC0B7FA8804247F185B6EB6C5175E67EA20D55F7029841559751A94B4AA323D8B40B2F59F1A8585E7BEDB5DC6752975D7699BBE79E7BE2D32AB58E9494CA4F25A8DD795A49F5EAD52B775A074324DB5D7AE9A56ECB2DB7743FFEF18FDD7DF7DDE75E79E51577CE39E7B8214386C49F6DE93E4D9B362DEF7BF6F4B4575225D4910208154FA8A012A1ED3B5A541DB97F2852D5BD006650D565548E921A376E5CBC5AD269AD9CF499905639D1DD71AFBFFEBABBF8E28BDDE0C183E3CB3BBA9252D1A998547E5B6DB5556E779F4EEBB3306DA395960ECED0C114C3870F8F0F63EFDBB7AFFBD18F7EE41E79E411B7E38E3BBA975E7A29EFFB95620C9594145304A1C269ABA012A1EB155B54C5DC2F7442D5BD006650D56554AE92D221E52A8F934E3AC9EDBDF7DEB992D2D7DA05981C00D1D192D2CA2839E8E1939FFC646E779F76E125BB10F577D68112679E79A6FBD5AF7E15DF0F1D4DF88B5FFC223E78E2F8E38F8F0F89F7BF5F29C65849495B85102A9A620A2A11BA7E7B45D5D6FD411755DD0B6006555D46E528291D06AE32D269ADA44E3EF9E4B8A4B40A52C1A43F3BD2CF461D74D041ADAEAF23FDBEF9CD6FC687977FF18B5FCCBBFD64F47352E9DBF2A777EFDEEE97BFFCA57BFBEDB7DDB9E79EEBCE3FFFFCF810F9679E79262ED1E9D3A7E75DA7A7C7604949A162B8E8239D2FA844A8A8FCFF993751E87EA09B54DD0B6006555D46E528A977DF7D37B7DAD16F97D0CF22A94C8E3CF2C8BC6DF57352FA9927FF7C6DAF15967E76CABF2C99030E3820FE5EFEF9C9E833A8EF7DEF7B6EE0C081AD8EFCD3E867A75E7DF5D5BCEBF4F4182D29091544BA603A535089626E27F4FDD1CDAAEE053083AA2EA372945468F41B2834FEF9A19F8F4AA6BD1FB44DFF6AA5D0B475DBE51AC32525A1A250A168E5132A968E68EB7642DF173DA0EA5E0033A8EA32B25252CCFF8DF19292521746A9BF5F55ABBA17C00CAABA8C28295B93819292521547A9BE0F36ABBA17C00CAABA8C28295B939192929E2E909EBE7D0454DD0B6006555D469494ADC95049494F15494FDD2EDA51752F80195475195152B626632525DD5D28DD7D7BE880AA7B01CCA0AACB8892B235192C29E9AE62E9AEDB412755DD0B6006555D469494ADC9684949570BA6ABD74737A8BA17C00CAABA8C28295B93E19292CE164D67AF876E56752F80195475195152B626E325251D2D9C8E6E8F1E54752F80195475195152B6A6024A4A8A2D9E62B7438954DD0B6006555D469494ADA9909292F60AA8BDCB510655F702984155971125656B2AA8A4A45011153A1F6556752F80195475195152B6A6C24A4AFC42F2BF862155F702984155971125656B2AB0A42429A6A19BFFA4A08CAABA17C00CAABA8C28295B53A12525276C7E7251508655DD0B6006555D469494ADA9E092AABE27570691917D55971125656B2829941319D95775195152B68692423991917D55971125656B2829941319D95775195152B68692423991917D55971125656B2829941319D95775195152B68692423991917D55971125656B2829941319D95775195152B68692423991917D55971125656B2829941319D95775195152B68692423991917D5597515D5DDDA6969696BC174BA6F413E5B0242AA90D7E4695A2EA9E5C194446F6555D4613264C58D2DCDC9CF782C9947EE6CF9F3F322AA9497E4695A2EA9E5C194446F6555D46F5F5F567353434AC6E6A6A5AC68AAA3C133DEE4DF3E6CD7B382AA805D1F4F633AA1455F7E4CA2032B2AF2A33D20BA3DEC147B3519F896471149C7F5E86468FBB1EFF8A2D28A9CA2757C690917D64945104671F19D94746F6915146119C7D64641F19D94746194570F691917D64641F196514C1D94746F691917D64945104671F19D94746F6915146119C7D64641F19D94746194570F691917D64641F196514C1D94746F691917D64945104671F19D94746F6915146119C7D64641F19D94746194570F691917D64641F196514C1D94746F691917D64945104671F19D94746F6915146119C7D64641F19D94746194570F691917D64641F196514C1D94746F691917D64945104671F19D94746F6915146119C7D64641F19D94746194570F691917D64641F196514C1D94746F691917D64945104671F19D94746F6915146119C7D64641F19D94746194570F691917D64641F196514C1D94746F691917D64945104671F19D94746F6915146119C7D64641F19D94746194570F691917D64641F196514C1D94746F691917D64945104671F19D94746F691510644218D5750EDCC78FF7A281D32B28F8CEC23A38C8A42A90904E54F8D7F3D940E19D94746F6915186D5B6FD0E8377160690917D64641F1965546DDBEF306AFCED517A64641F19D9474619561B7E87C13B0B43C8C83E32B28F8C32AA36FC0EA3C6DF0EE54346F691917D649461B5ADDF61F0CEC22032B28F8CEC23A38CAA6DFD0EA3C6BF1CE54746F691917D649461B59BDF61F8E7C30E32B28F8CEC23A38C4ADE61F8E7C30E32B28F8CECABCA8C9C735B3536363E3A71E2C4BFD6D5D5B9B163C732259EE871DF3461C28425F5F5F567F9F948A564A427977F5E56868CEC4FB56494E5692FA3A028B4C7A22BB9E6E666D7D2D2E2366EDCC89478F4B8EBF16F6868581D05D99B8CEC0D19D91F32B23FED6514A47715BA927F634CE9A7A9A9695914DC2432B23B64647FC8C8FE14CA2848CB5EDE55D818E51005B7818CEC0E19D91F32B23F85320AD27E42FF0698F28DF22023DB4346F6878CEC4F28A3A062835BB7AAC935BE36DC4D1F77533C3AADF3FCED98AE4D283832B23564647FC8C8FE84320A2A26B8B52B17BB696386B929CF7CBFD5E83C5DE66FCF747E42C19191AD2123FB4346F62794515031C12D9C3E2A2FB464164D1F9DB73DD3F909054746B6868CEC0F19D99F504641C5043763FCED798125A3CBFCED99CE4F283832B23564647FC8C8FE84320A2A26B869636FC80B2C195DE66FCF747E42C19191AD2123FB4346F627945110C1D99A507064646BC8C8FE9091FD096514544C703AC2C50F2C195DE66FCF747E42C19191AD2123FB4346F62794515031C1CD7EE9DEBCC092D165FEF64CE727141C19D91A32B23F64647F4219051513DCF2C553DDB417AECF0B4DE7E9327F7BA6F3130A8E8C6C0D19D91F32B23FA18C828A094E3377F288BCE0749EBF1DD3B509054746B6868CEC0F19D99F5046414505B761839BFDF2CFF282D379BA2C6F7BA6D3130A8E8C6C0D19D91F32B23FA18C82DA0B4E3F653DEBA57BF2424B4697F193D8DD37A1E0C8C8D69091FD2123FB13CA28A86070D1BB86A6D9F5EE2FCF5F9B17963FDA46DBF24EA3EB130A8E8C6C0D19D91F32B23FA18C8242C1B5F78EA2D0F04EA3EB130A8E8C6C0D19D91F32B23FA18C8242C115F38EA2D0E8BAFEED31C54F283832B23564647FC8C8FE84320A0A05E787D1D1F16F8F297E42C19191AD2123FB4346F6279451502838A67C130A8E8C6C0D19D91F32B23FA18C8208CED6848223235B4346F6878CEC4F28A32082B335A1E0C8C8D69091FD2123FB13CA2888E06C4D283832B23564647FC8C8FE84320A22385B130A8E8C6C0D19D91F32B23FA18C8208CED6848223235B4346F6878CEC4F28A32082B335A1E0C8C8D69091FD2123FB13CA2888E06C4D283832B23564647FC8C8FE84320A22385B130A8E8C6C0D19D91F32B23FA18C8208CED6848223235B4346F6878CEC4F28A32082B335A1E0C8C8D69091FD2123FB13CA2888E06C4D283832B23564647FC8C8FE84320A22385B130A8E8C6C0D19D91F32B23FA18C8208CED6848223235B4346F6878CEC4F28A32082B335A1E0C8C8D69091FD2123FB13CA2888E06C4D283832B23564647FC8C8FE84320A22385B130A8E8C6C0D19D91F32B23FA18C8208CED6848223235B4346F6878CEC4F28A3A07207377BF6ECF8CFA79E7ACABDF7DE7B79976B1A1A1ADCF2E5CB735FBFF5D65B6ECE9C3979DBA567EAD4A9EECD37DFCC3B3F3DA3468D722B56ACC87D3D66CC18B77AF5EABCED4A39A1E04A9DD1C89123DDBA75EBDC860D1BF22EEBC82C5BB62CEFBC969696DCE9E79E7BCEAD5FBF3E6F1BEBD99533A3050B16E44EAF5DBBD63DFFFCF379DB68DE78E30D376BD6ACBCF3D3CFA3AE0C19159E193366B82953A6C4A7C78D1BE7962E5D9AB78D3F4F3CF1449BCFB7458B16C57FA7F479EFBCF34EABC7D79F2C6614E4FFC54B392FBFFCB2FBFBBFFF7B3779F26477E59557BA5FFCE21779DB684E3AE92477D14517C5A7F5805E77DD75EE2B5FF94A1CEABBEFBE9BDB6EC99225B9174695D80E3BECE0E6CD9B97BBDC0FF4F4D34F77575D7555EEEBBBEFBEDB1D73CC31F169FDA368EB1F4D4F4D28B85264A427C98F7FFCE3F81FE8673EF319F7EB5FFFDADD7CF3CDEEA69B6ECADBB6D0E84DC64B2FBD94FB5A999E78E289EEB4D34ECB4DF4D78973D1E9EDB6DBCEFDE10F7F88B7CD5276E5CA48A37FFB03070E8C4F3FF9E4936EE79D77CEBD20A6E7924B2E71471F7DB47BE8A1875A3DFEFFF00FFFE0EAEAEAF2B65FB3664D9C9DDE00A6CF7FFAE9A7736F2CC8A8B8D1E3ABC7B9A9A9C90D1D3A347EFDD2DF558FDFFBEFBF9FB7BDE68B5FFCA2BBEDB6DB725FBFFEFAEBAD2E572E5B6CB1455C3CFA5A6FEE8E3DF65877F2C927B77AE397F58C824A155C68CE39E71C77F9E597C7A75F78E10577C10517E46DF3EAABAFBA8F7EF4A3EEB8E38E73353535EE0B5FF882DB7EFBEDDD41071DE4BEF5AD6FB93DF6D8C3FDD77FFD57BCAD9EC07A51ECD3A78F3BFBECB3E317C4534E39C57DFDEB5F8FC3D875D75DE377EFC96D9F75D659F18BF1F5D75FEFCE38E30C77EAA9A7C6D7D1E9DD77DFDD0D1A34A847430A4D28B89ECE48EFAEF50E5DFFE0870C19E23EFFF9CFC7EFA8F6DA6B2F3762C488DC1B013D31543CE917BDF41C70C001EE939FFC64FC2E5EDB5F7DF5D57126E9EFA527CDFCF9F3E327801EE3E44997A5ECCA9191466F20F422F4B18F7D2C7E01D263A392F75F78162E5CE876DA69A7F885EDF6DB6F7773E7CE8DCFD7F34B933C2EBACF7ABC347A3E299B5D76D925779E66ABADB6CA952019159ED1A347E79E077A73B0E38E3BE6DE88E9EFACD96DB7DDE2C74A8FE737BEF18DF874F238EBB157E9E8B44AEDEFFEEEEFDCB5D75E9BBB7DAD8AB7DE7AEBDCD7975D7699FBE77FFEE7BCD572D6330AEAC9E0DA9AFAFA7AB7CF3EFBB47A821D76D861F18B62F2B59E942AA5679E79C67DED6B5F73F7DC734FFC00FEF297BF748F3DF658DCF87AB14BDE49E84555B79B5C5F65A677823AAD15C115575CE11A1B1BE30747FF80F48F66CF3DF7749FFDEC67DDCC9933E3FB73CD35D7B8FBEFBFBF644B5E7F42C1F57446FFF99FFF19BF486905F5A94F7DCA7DFCE31F8FFF81EA6B3D4E3A4FFF88B5ADDEA5A533DB6FBFFD5A3DE6E9D1BB483D61D22F7A5B6EB965BC0AD66D2ACBA4A4B2945D3932D2E89DB6DEA8291FBDE8E831D263AA62D163A36DF48272EEB9E7C66FDC1E7EF8E1F871D2EEF2FBEEBB2F7E27AE1573FA36F5E6442F987A3EFDE52F7F719FF8C427E2172A15A11E679554B22D19B53DFA3B7EFBDBDFCEFDDBD61B36FDA9C7E9E28B2F8E0B2579ADD2E3FEDDEF7ED7F5EAD52B7EAC5452471D7554EE71F357BB4949E9FA83070F8EAFD7DCDC9C771FB29E51504F07171A15CBBEFBEE1BEFAF4D9F3F71E2C4F81DC8A5975E1AEF025CBC78B13BE28823DC97BFFCE5F889A877280A5E4F22BD03D0BBC5BDF7DE3B0E4DD7D7F6071E7860EE05514F34959B4EEBC9A7DB4FBE9702D06DDE78E38DF1E72F5AD16997A256017AF7A327AD7FBF4B31A1E07A322365A12788564ECA245D282AA0430F3D347E7CF50EDEBFAEA6BD92D23B3BED6ED08BA7BE8EFE3AB9CF55D22BA92C6557EA8C92B9F3CE3BF3F63668B5A477C7C9D7DA65AEC7586FEEB6DD76DBF8BEDE72CB2DF11BC0091326C425A777EC5A6D25D7F9E637BFE91E7CF0C178F7BBDEACE8F1D56E445DA6424CB623A3C2A3BF8F5EF4F5A6ECAB5FFD6AAE78F4465AA78F3FFEF8B8BCB41B36B98E0A4339E9F1D3EB5EB292527EC9EA37199594CEEFDDBB77BC1B3EBD8B2FBD6B30EB1905F56470A1D10B949E28679E79666E799CCCFEFBEF1F2F4DB58CD5AEC069D3A6C59F5969BFBA9E3CE96DD5F85A0E6B37A0B64B6E3FFDAE524FB4E4DD864E2BC0643BBDBB8CFEFAF1F9BA0D9DD63F986DB6D9C6DD75D75DF113DABFEFA59850703D9DD1DB6FBF1DFFA9C72EFDC1BCFE61B7F70FB59892D269FD1DB432D3E31B2A294D56B22B47461AFDDD4225A5C72DF95ABB6EB53B47EFE8870D1B16BFA8DD7AEBADF18B902ED767227ACCB48BE795575E899F879FFEF4A7E3DBD01B40ADB6D22B29ED764A7F3F320A8FDE84A9F8F5864E2595148FCA49A7F51955FA20061D30A6C7428F89BF92D263A5378DDAEEB7BFFD6D7C7DED8AD7F9FAEC2A29208D76E12923EDD64D6E3BCB1905F56470A1514BEB454A4F16BD1B50285A5AEA329DFEDFFFFDDFDC132AF9B0F18F7FFC631C783A1C05A1DD80C9B6C9E8DD4AF261BD9E68C9725AA7B56A48B6D36A4DBB9E74B0807685E809AB62D467327A61D5EDA7CBAF54130AAE5419E989943CC134DA15A023FDFCEDD2534C494D9A34C9FDD33FFD53BC2F5E4FC642259595ECCA959176CBFEE33FFE63BC2AD2E716CA487FEA314DB6D1EE587D8EA05CF4F9A11E43ED754832D58BA676EF2447C76A95ABCBF566446F567EFAD39FB65A49E95D76FA3E9051DBA3D5913E9B4D8A275949A9FCFD6DF5782547B71E72C821B9E79176EBBDF8E28BF1D19BBA5CCF97F46752FA3C4A9FE1FBB7974C96330A2A457085464F28BD7BD3A194FA5AEF2442EFDC75D491424C9FF7BBDFFD2E77BDF4E8C9A550F484D4FEF464A9ABD3C9125AEF32F444D7BB90E1C387C7EF3EFBF6EDEB7EF4A31FB9471E79242EC4F4516AA59C5070A5CA484F303D2E7A0CF438EAC3E0D07EEFF4B45752DA5DAB77E63AD4F5B5D75E8B772324BB9AFC92CA4A76E5C8486FE8F46E599F37E973257D86A0BFAF5E74F4C2B272E5CA783B3D1EDACB70DE79E7B9F1E3C7C72F723A50E581071E885FA8FCDBD568779F9E77DA2DA8ACB4FAD263AEC7587B32D22F8864D4F6682595DE8597ACA4A26F9F2B24AD62D36FB8936D93DD7D2A347D94A1BC5454BA4EBAA4F4D991F257A9F8DF5F93E58C824A115CA1B9E1861B5AEDBEF8DCE73E17BF83F0B7D3B233396C3919857FF8E187B7DA37AB490EA3D6691560F222ABE5AB0EB3D569FD9D15B47675FCEA57BF8A03D4CF9B687FBE9EE0BA6DFFA899524D28B85265A4774D7A17A677D7C93B69CD1D77DC51F009E1979476352599A8A4FAF5EB177FAD7FF82A251D39981C86EB975456B22B47462AA81FFEF087F16E1995893E0CD7BB5F3DAEFA9C43EF7AF599921E33BD21D0F6E79F7F7E5C403A4FBB8D929252A1E945492F9A2A32ED4AD707EEBA7DFD8CCFAA55AB72F9EB2099F42E22326A7BF4D144B2FAD01B6B65A2D3CA2A797CF4EF5FCF191DB052A8A4D29F196AD225A5239EF5D9913E63FAFEF7BF1FBF09496F9BE58C824A115C68F421B0564E7A00B54B411F066A5F68E8077A75A48B5F52071F7CB0ABADADCDDB363DBA4EFA09E68FDE31EA4841EDE6D03B543DA9F58377DA8DA87732D3A74FCFBB4E4F4F28B89ECE48BB55F533372A1CBDE356067AD22497EB89A0DD40E9C36C93D107EBC9BE74BD7BD38F0BA898F402A843D0554AC9B6FACC512FB2C9D7CA3BF4333E1ACBD9953A23ED315089E88D823ECFD5517BC9653A12EB673FFB597C34DF9FFEF4A7F8C54F9FFDE9F9A4F39317411D00A3032C745A9FF9EA45482B32959B0A4DC597E492FE4C4ABB6975E052E80752C9A8F5E87326FD584CBA789295940E4A52067A03906CAF55F0A38F3EEAEEBDF7DEF84769F41991CE4F974C323A38429F3DE9C858AD9CF598EA0DBDDED8477FB578B7AF7F7F3459CB28A8A783F3472F88DA15F1939FFC24F779923E50D4BB39BD40FADB6BB4BB41FBCDD3E7E945D5DF5FEE8FF60DA77FD8D71F85FDBDEF7D2FFEE1C8F4512F1A1D72AD772CFE757A7A42C1F564467AE7A7DD01FA81BEE41DA0563E7A71D2AE399590DEC1253FB3913EB0A2BDD163AB5D09FEF9C9E88D46F21B47FCB19C5DA9334A8F3E67521ECA45A35D38FEF320BD774179B5F5732EFA8153FDA977D8C9E962878CFEFFE80D84769D69F5143ABA4FA3D5A97E7629FD5B56B4D7422B61ADA2DAFA6D205AF5E84DA456C9E9F3755B2ABA6485E44FD6320AEAC9E0BA6B0AFD94767BE31F54E14F676FB72727145C4F66D4D60B5857A7BDC73FF42B918ABD6E39B32B754656878C5A8F76D1F91F3F1433C53E07DB7ABE149AAC6514D4D3C1311D9B507064646BC8C8FE9091FD0965144470B626141C19D91A32B23F64647F421905119CAD09054746B6868CEC0F19D99F50464104676B42C19191AD2123FB4346F627945110C1D99A507064646BC8C8FE9091FD0965144470B626141C19D91A32B23F64647F421905119CAD09054746B6868CEC0F19D99F50464104676B42C19191AD2123FB4346F627945110C1D99A507064646BC8C8FE9091FD0965144470B626141C19D91A32B23F64647F421905119CAD09054746B6868CEC0F19D99F50464104676B42C19191AD2123FB4346F627945110C1D99A507064646BC8C8FE9091FD09651494A5E0F41B7DF5DF49F8BFD9B7A3E75B9E507059CAA81A868CEC0F19D99F504641590A4E8513DDE5DCFF7BD4D9F32D4F28B82C65540D4346F6878CEC4F28A3A02C0557A8743A7ABEE5090597A58CAA61C8C8FE9091FD09651494A5E00A954E47CFB73CA1E0B29451350C19D91F32B23FA18C82B2145CA1D2E9E8F99627145C9632AA862123FB4346F62794515096822B543A1D3DDFF28482CB5246D53064647FC8C8FE84320ACA5270854AA7A3E75B9E507059CAA81A868CEC0F19D99F504641590AAE50E974F47CCB130A2E4B1955C39091FD2123FB13CA28284BC1152A9D8E9E6F7942C16529A36A1832B23F64647F4219056529B842A5D3D1F32D4F28B82C65540D4346F6878CEC4F28A3A02C0557A8743A7ABEE5090597A58CAA61C8C8FE9091FD09651494A5E00A954E47CFB73CA1E0B29451350C19D91F32B23FA18C82B2145CA1D2E9E8F99627145C9632AA862123FB4346F6279451505D5DDDA6969696BC1BB038854AA7A3E75B9D28872551701BBC88329551A50F19D91F32B23F85320A9A3061C292E6E6E6BC1BB138857EAB7947CFB73AF3E7CF1F19053729CB1955FA9091FD2123FB5328A3A0FAFAFAB31A1A1A563735352DE35D4679267ADC9BE6CD9BF77014DA82687A9391BD2123FB4346F6A7BD8C0AD2C66AB568364613EF2BCCDAD4D6D6E69D97A1D1E3AEC7BF6068BA6CF33664549E2123FB4346F6A7DD8C2A9682F3CF832D64641F19D94746194570F691917D64641F196514C1D94746F691917D64945104671F19D94746F6915146119C7D64641F19D94746194570F691917D64641F196514C1D94746F691917D64945104671F19D94746F6915146119C7D64641F19D94746194570F691917D64641F196514C1D94746F691917D64945104671F19D94746F6915146119C7D64641F19D94746194570F691917D64641F196514C1D94746F691917D64945104671F19D94746F6915146119C7D64641F19D94746194570F691917D64641F196514C1D94746F691917D64945104671F19D94746F6915146119C7D64641F19D94746194570F691917D64641F196514C1D94746F691917D64945104671F19D94746F6915146119C7D64641F19D94746194570F691917D64641F196514C1D94746F691917D64945104671F19D94746F6915146119C7D64641F19D94746194570B644798C5726EDCC78FF7A282F9E47F6915146119C2D511E358152F2A7C6BF1ECA8BE7917D64945104674F6DDBAB29565106F13CB28F8C328AE0ECD14A29504EACA20CE379641F196514C1D9A41553A0A0584519C5F3C83E32CA2882B3492BA64049D5F8DBC1069E47F6915146119C5D5A39B18ACA069E47F6915146119C5DDE6AAAC6BF1C76F03CB28F8C328AE06C4B5653FEF9B0858CEC23A38C2238DB92D5947F3E6C2123FBC828A32A3938E7DC568D8D8D8F4E9C38F1AF7575756EECD8B1991C65E49F9795891EF74D13264C58525F5F7F969F4F25A9E4E751A520A38CAAE4E0A2827A2C7A8174CDCDCDAEA5A5C56DDCB89129F1E871D7E3DFD0D0B03A2AADDE7E4695A2929F4795828C32AA9283D30A4A2F90FE0B2753FA696A6A5A1695D4243FA34A51C9CFA34A41461955C9C169171F2B281BA31CA292DAE06754292AF9795429C828A32A39387D26E2BF5832E51BE5E16754292AF9795429C828A32A39B8624B6ADDAA26D7F8DA70377DDC4DF1E8B4CEF3B763BA369414CA898C32AA92832BA6A4D6AE5CECA68D19E6A63CF3FD56A3F37499BF3DD3F9A1A4504E649451951C5C3125B570FAA8BC824A66D1F4D179DB339D1F4A0AE544461955C9C115535233C6DF9E574EC9E8327F7BA6F34349A19CC828A32A39B8624A6ADAD81BF2CA29195DE66FCF747E2829941319655425074749D91A4A0AE544461955C9C11553523A9ACF2FA7647499BF3DD3F9A1A4504E649451951C5C312535FBA57BF3CA29195DE66FCF747E282994131965542507574C492D5F3CD54D7BE1FABC82D279BACCDF9EE9FC5052282732CAA84A0EAE9892D2CC9D3C22AFA4749EBF1DD3B5A1A4504E649451951C5C5125B561839BFDF2CFF24A4AE7E9B2BCED994E0F25857222A38CAAE4E0DA2B29FD4689592FDD935750C9E8327EEB44F70D25857222A38CAAE4E00A9654B4426A9A5DEFFEF2FCB579C5E48FB6D1B6ACAABA3E9414CA898C32AA92830B95547BABA742C3AAAAEB4349A19CC828A32A39B8504915B37A2A34BAAE7F7B4CF14349A19CC828A32A39B85049F9C5D3D1F16F8F297E282994131965542507172A29A67C4349A19CC828A32A39384ACAD65052282732CAA84A0E8E92B2359414CA898C32AA9283A3A46C0D25857222A38CAAE4E028295B4349A19CC828A32A39384ACAD65052282732CAA84A0E8E92B2359414CA898C32AA9283A3A46C0D25857222A38CAAE4E028295B4349A19CC828A32A39384ACAD65052282732CAA84A0E8E92B2359414CA898C32AA9283A3A46C0D25857222A38CAAE4E028295B4349A19CC828A32A39384ACAD65052282732CAA82C0617DDE7F1D1D4F8E7FB28295BD35E49F5EBD76F48342BFDF3B3208BCFA36A43461995C5E0749F374F9B654549D99A422595945392AB7F791664F57E571332CAA82C06972AA936CB8A92B2357E49F9E54449A127915146653138FF45AD50595152B62629A942E5944C2EE80CC9EAFDAE26649451590CCE7F510B4C5C56E52EA9A54B97BAF1E3C7E79D9F9EA79E7ACAAD5EBD3A3EBD78F162F7EAABAFBAC99327BBE5CB97B7DA6ED5AA556EE5CA9579D7D7BCFFFEFB7101F8E76BC68D1BE79A9A9AF2CE2FC7DC75D75DAEAD724AC6CF3B0BB27ABFAB09196594FF02514953E885BBA767E6CC99F19F6BD7AE75071E78A01B316244EEB2458B16B5DAF684134E7037DD74537CFAEDB7DF76DB6EBBADBBE8A28BDC11471C11974FB2DDDCB973DD5E7BEDE54E3BEDB4BC39EEB8E3DC6EBBED162CB1830E3AC89D7CF2C9B9DBD29FFA3EFE76A5183F1F8629F5F8AF7F408FF0FFE1A5667C6D9977F76955B4FBEEBBBB33CE38239EE86EC4937CBDFDF6DBB72A2D15C8C89123E3D3EFBCF34E7CDDDB6FBFDD5D7EF9E56EDDBA7571D1E932ADB2B6DE7AEBDCF57AF5EAE5468F1E1D9FD69F471F7D74EEB2EBAEBB2E2E2FDDB6BEF761871D962BB42F7DE94B6ED75D7775D3A64DCBBBEF3D3D95BCBB0F0072FC1735BF9C12E528A9A14387BAE38F3F3E3EADEFFFD65B6FE52EFBF9CF7FEE060D1A14EF06FCED6F7F1B97C62EBBEC922BB2134F3C312EA93BEEB8C3EDB3CF3EEED0430F8DB75151BDFBEEBB6E8B2DB6C8959DAE77E49147C6A7F567BAA4B4A2D29C7EFAE9EE073FF8813BE9A493DCDD77DF9D775F4B3D957CE00400E4B4574E89729494CA4425A4D3BD7BF776679F7D76EEB2254B96B8499326B90D1B36B896969678A5A415D11FFEF087F8FCC6C6C65C496925A5A2D1B6C9ED6EB7DD76B9DB6A6B25A519356A94DB638F3DDC8A152BDCB1C71EEB1E79E491F87C7DDE95DC66A9C72FA9845F56FEE5009029ED9553A2D425D5D0D010AF5E925D6BFA7C499F2DA53F3FD22EBB810307C645316BD6ACF833AB030E38202E99F44A6AEFBDF776FBEEBB6F6EDB050B16B81D77DC31F7BDDA2AA9850B17C6DBEA36F43D77DA692777C82187E4EED3D5575F9D77DF4B31854A2A91E51FE605800E2B754969D6AC5913FFA9A24956513A58429F45A53F07FAE94F7FEAB6D9669B78B79D4A46ABAA3973E6B45A49E9BCE428BFA953A7BAADB6DA2A5776BADEE1871F1E9FD69FFE4A4A7FF7E46009ED7E4C56529A193366E41D3D588A69AFA400A0AA94A3A434EFBDF75E5C22B7DC724B5C50175F7CB11B306040AB6D7480457D7D7DBC225221A96CFC95D4C1071FEC8E3AEA28B76CD9B2B8C892CFBA34A79C728A7BFAE9A7E3D3E995D4638F3DD66AE5E6AFA4343A7042B7A5C3DAFDFBDE93434901404AB94A4A9F37BDFEFAEBF16A49A513DD1577E18517BA891327E66D9BECB6D3C111B367CF6EB5924A6F77D55557B95B6FBD35F7B58EDCD3E74E3A9D2E29ED1AD4675FE9EBEA10F5871F7E38EF7B977A28290048295749A928F4F9D4B7BEF5AD78C5F3E73FFF395E55EDB0C30EF14A4685347FFE7C77DB6DB7B9FDF7DFDF8D193326BE9E8E044C4A6AF0E0C1B9DBD36E3FFDBC53BA7C6A6A6ADCEF7FFF7BFD706C5C585A85F9F72319ADC61E78E081BCF34B3D941400A494BAA474249D4A23D985F7E28B2FB6BA5C3F07D5B76FDF7817E0FAF5EBE39F873AE18413729F634D993225FEFACE3BEF74FFF11FFF91BBDEF0E1C35BFD6C95E6FEFBEF8F0F90D01181C71C734CFC9B2BFCFB938C76ED25BB06CB39941400A494BAA43A3AFEA1E0E9DF0AD1D6761D1DED7EF4CF2BC75052009062BDA4AA6D28290048A1A46C0D250500299494ADA1A400208592B235941400A45052B686920280144ACAD6505200904249D91A4A0A005228295B434901400A25656B28290048A1A46C0D250500299494ADA1A400208592B235941400A45052B686920280942C9594FECF28FDF7F2FAB32BE75B1E4A0A0052B254522A9CE82EC77F76E57CCB434901400A25656B28290048A1A46C0D250500299494ADA1A400208592B235941400A45052B686920280144ACAD6505200904249D91A4A0A005228295B434901400A25656B28290048A1A46C0D250500299494ADA1A40020A5AEAE6E534B4B4BDE8BA5C529543A1D3DDFEA44392C894A6A8317110054AF0913262C696E6ECE7BC1B438857EAB7947CFB73AF3E7CF1F1995D4243F2300A85AF5F5F567353434AC6E6A6A5A96951555A54DF4B837CD9B37EFE1A8A01644D3DBCF0800AA9A5E18F50E3E9A8DFA4C248B535B5B9B775E86468FBB1E7F0A0A002A914ACA3F0F0000132829008059941400C02C4A0A006016250500308B9202009845490100CCA2A400006651520000B32829008059941400C02C4A0A006016250500308B9202009845490100CCA2A400006651520000B32829008059941400C02C4A0A006016250500308B9202009845490100CCA2A400006651520000B32829008059941400C02C4A0A00601625050030212AA4F12AA57666BC7F3D00007A5C5440358152F2A7C6BF1E000025A19552A09858450100CA4F2BA54039B18A0200D8506035C52A0A00507E05565335FE7600009485B79A62150500B0C35B4DD5F89703005056C96ACA3F1F008092EADFBFFF8E51219DD3B76FDFFF8EFEAC8B666E341B36AFA4D66FFEBA6EF3E5E7687BFF360000E856FDFAF5EB1595CEE3D16CDC5C48C58EB67F5CD7F76F1300802E89CAE5A8A8645E09944F67E615DD9EFF3D0000E890FEFDFB6FD3B76FDFFF898A65935F3643860C710F3DF4907BFDF5D7DD9C3973DCF2E5CB9DE84F7DADF375B9B6F3AFABDBD3EDEAF6FDEF090040BBA222D9335AF14C4997CB79E79DE77EFEF39FBB458B16C585542C6DAFEBE9FA5E59FD59DFC7FFDE0000141495D301D12C4E17CAEDB7DFEE162E5CE8F74F87E8FABA1DAFA816EAFBF9F70100803C9B5750B982D2EA67D4A8517EDF74896ECF5B552D6445050068933E234AEFE21B3060807BF3CD37FD8EE916BA5DDD7EAAA8FECC6754008082361F24915B41F554412574FBE91595BEBF7F9F0000480E33FF30298CD1A347FB9DD223F47D52ABA90F393C1D0090A736F573503AB8A194BC83295EF1EF1B00A08AF5E9D3E794F46EBEAE1EC5D751FA7EE9DD7EBA3FFE7D040054A9DAFFFB55477141E8E799CA41DF37B59A7ADCBF8F00802A14AD603E599BFA5D7CA55E4525F47D5325B551F7CBBFAF00802A1315C2394939E857189593F72B94CEF1EF2B00A0CA4465704F520C0F3EF8A0DF1B25A5EF9F2AA97BFCFB0A00A832FDFAF5AB4F8A61F2E4C97E6F9494BE7F725F74BFFCFB0A00A83251212C488AA1B1B1D1EF8D92D2F74FADA416F8F715005065A215CB9AA41856AC58E1F74649E9FBA756526BFCFB0A00A8325121FC2D29860F3EF8C0EF8D92D2F74FADA4FEE6DF5700409561250500304B9FFD24C5C0675200005338BA0F0060562D3F270500B0AAD6D06F9CF8EE77BFBB295552FCC60900A876FCEE3E008069B5FC167400805516FE3FA97EFDFAE576F5F1FF4901005AA9E57FE605005815AD648E8A0AE2C3A42C468F1EED77498FD0F74915D487BA1FFE7D0300E0237DFBF6FD9FF46EBF37DF7CD3EF946EA5DB4FEFE6D3F7F7EF130000B1FEFDFB6F1395C59F93D2183060408F15956E37FA7EB9959BBEAFBEBF7F9F0000C889CA62CF6816A65754A3468DF23BA64B747BE915D4E6EFB7A77F5F0000C81315C801E9A2D2E8E086AE1EF5A7EB7B0749C405A5EFE7DF0700000ADABCA2CAEDFAD36855A59F675AB46891DF3F6DD2F6BA9EB77A8A77F1E9FBF8DF1B008076E933A2CD0753F8E512FF0AA5871E7AC8BDFEFAEB6ECE9C396EF9F2E57121E94F7DADF375B9F7AB8E92D9A4DBE533280040976D3E3C3DF773545D9C5738CC1C00D0EDA272E955FB7FBF4229F7BBFE8A1C6DFFB8AEEFDF260000DDAA7FFFFE3B46A5734EDFBE7DFF3BFAB32E9AB9D1ACDF5C48FA535FD76DBEFC1C6DEFDF0600000000000000000000000000000000000000004025F87FC69727B0B5D5FFC30000000049454E44AE426082, 1);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('6002', 1, '设备审批.bpmn', '6001', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('6003', 1, '设备审批.device_approval.png', '6001', 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
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('7002', 1, '生产部门考核.bpmn', '7001', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('7003', 1, '生产部门考核.sc_assess.png', '7001', 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
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('7006', 1, '经营发展部考核.bpmn', '7005', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('7007', 1, '经营发展部考核.jy_assess.png', '7005', 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
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('7010', 1, '综合事务部考核.bpmn', '7009', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('7011', 1, '综合事务部考核.zh_assess.png', '7009', 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
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('7014', 1, '技术质量部考核.bpmn', '7013', 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, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('7015', 1, '技术质量部考核.js_assess.png', '7013', 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
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('7018', 1, '财务部考核.bpmn', '7017', 0x3C3F786D6C2076657273696F6E3D22312E302220656E636F64696E673D225554462D38223F3E0A3C646566696E6974696F6E7320786D6C6E733D22687474703A2F2F7777772E6F6D672E6F72672F737065632F42504D4E2F32303130303532342F4D4F44454C2220786D6C6E733A7873693D22687474703A2F2F7777772E77332E6F72672F323030312F584D4C536368656D612D696E7374616E63652220786D6C6E733A62706D6E64693D22687474703A2F2F7777772E6F6D672E6F72672F737065632F42504D4E2F32303130303532342F44492220786D6C6E733A6F6D6764633D22687474703A2F2F7777772E6F6D672E6F72672F737065632F44442F32303130303532342F44432220786D6C6E733A62696F633D22687474703A2F2F62706D6E2E696F2F736368656D612F62706D6E2F62696F636F6C6F722F312E302220786D6C6E733A666C6F7761626C653D22687474703A2F2F666C6F7761626C652E6F72672F62706D6E2220786D6C6E733A64693D22687474703A2F2F7777772E6F6D672E6F72672F737065632F44442F32303130303532342F44492220786D6C6E733A7873643D22687474703A2F2F7777772E77332E6F72672F323030312F584D4C536368656D6122207461726765744E616D6573706163653D22687474703A2F2F7777772E666C6F7761626C652E6F72672F70726F63657373646566223E0A20203C70726F636573732069643D2263775F61737365737322206E616D653D22E8B4A2E58AA1E983A8E88083E6A0B82220666C6F7761626C653A70726F6365737343617465676F72793D22617373657373223E0A202020203C73746172744576656E742069643D2273746172745F6576656E7422206E616D653D22E5BC80E5A78B223E0A2020202020203C6F7574676F696E673E466C6F775F316D6E727078703C2F6F7574676F696E673E0A202020203C2F73746172744576656E743E0A202020203C757365725461736B2069643D2241637469766974795F31306E3133646122206E616D653D22E59198E5B7A5E5A1ABE68AA52220666C6F7761626C653A75736572547970653D2261737369676E65652220666C6F7761626C653A61737369676E65653D22247B494E49544941544F527D223E0A2020202020203C696E636F6D696E673E466C6F775F316D6E727078703C2F696E636F6D696E673E0A2020202020203C6F7574676F696E673E466C6F775F3077617A7436783C2F6F7574676F696E673E0A202020203C2F757365725461736B3E0A202020203C73657175656E6365466C6F772069643D22466C6F775F316D6E727078702220736F757263655265663D2273746172745F6576656E7422207461726765745265663D2241637469766974795F31306E3133646122202F3E0A202020203C757365725461736B2069643D2241637469766974795F3070713669777822206E616D653D22E983A8E997A8E5AEA1E6A0B82220666C6F7761626C653A75736572547970653D2261737369676E65652220666C6F7761626C653A64617461547970653D2264796E616D69632220666C6F7761626C653A61737369676E65653D22237B617070726F76616C7D223E0A2020202020203C696E636F6D696E673E466C6F775F3077617A7436783C2F696E636F6D696E673E0A2020202020203C6F7574676F696E673E466C6F775F3179687266786B3C2F6F7574676F696E673E0A202020203C2F757365725461736B3E0A202020203C73657175656E6365466C6F772069643D22466C6F775F3077617A7436782220736F757263655265663D2241637469766974795F31306E3133646122207461726765745265663D2241637469766974795F3070713669777822202F3E0A202020203C757365725461736B2069643D2241637469766974795F30336C3779676B22206E616D653D22E58886E7AEA1E5AEA1E6A0B82220666C6F7761626C653A75736572547970653D2261737369676E65652220666C6F7761626C653A64617461547970653D2264796E616D69632220666C6F7761626C653A61737369676E65653D22237B617070726F76616C7D223E0A2020202020203C696E636F6D696E673E466C6F775F3179687266786B3C2F696E636F6D696E673E0A2020202020203C6F7574676F696E673E466C6F775F3069793133697A3C2F6F7574676F696E673E0A202020203C2F757365725461736B3E0A202020203C73657175656E6365466C6F772069643D22466C6F775F3179687266786B2220736F757263655265663D2241637469766974795F3070713669777822207461726765745265663D2241637469766974795F30336C3779676B22202F3E0A202020203C73657175656E6365466C6F772069643D22466C6F775F3069793133697A2220736F757263655265663D2241637469766974795F30336C3779676B22207461726765745265663D224576656E745F3034376665756722202F3E0A202020203C656E644576656E742069643D224576656E745F3034376665756722206E616D653D22E7BB93E69D9F223E0A2020202020203C696E636F6D696E673E466C6F775F3069793133697A3C2F696E636F6D696E673E0A202020203C2F656E644576656E743E0A20203C2F70726F636573733E0A20203C62706D6E64693A42504D4E4469616772616D2069643D2242504D4E4469616772616D5F666C6F77223E0A202020203C62706D6E64693A42504D4E506C616E652069643D2242504D4E506C616E655F666C6F77222062706D6E456C656D656E743D2263775F617373657373223E0A2020202020203C62706D6E64693A42504D4E53686170652069643D2242504D4E53686170655F73746172745F6576656E74222062706D6E456C656D656E743D2273746172745F6576656E74222062696F633A7374726F6B653D22223E0A20202020202020203C6F6D6764633A426F756E647320783D223134302220793D223330222077696474683D22333022206865696768743D22333022202F3E0A20202020202020203C62706D6E64693A42504D4E4C6162656C3E0A202020202020202020203C6F6D6764633A426F756E647320783D223134342220793D2236222077696474683D22323222206865696768743D22313422202F3E0A20202020202020203C2F62706D6E64693A42504D4E4C6162656C3E0A2020202020203C2F62706D6E64693A42504D4E53686170653E0A2020202020203C62706D6E64693A42504D4E53686170652069643D2241637469766974795F31306E313364615F6469222062706D6E456C656D656E743D2241637469766974795F31306E31336461223E0A20202020202020203C6F6D6764633A426F756E647320783D223130352220793D22313030222077696474683D2231303022206865696768743D22383022202F3E0A20202020202020203C62706D6E64693A42504D4E4C6162656C202F3E0A2020202020203C2F62706D6E64693A42504D4E53686170653E0A2020202020203C62706D6E64693A42504D4E53686170652069643D2241637469766974795F307071366977785F6469222062706D6E456C656D656E743D2241637469766974795F30707136697778223E0A20202020202020203C6F6D6764633A426F756E647320783D223130352220793D22323230222077696474683D2231303022206865696768743D22383022202F3E0A20202020202020203C62706D6E64693A42504D4E4C6162656C202F3E0A2020202020203C2F62706D6E64693A42504D4E53686170653E0A2020202020203C62706D6E64693A42504D4E53686170652069643D2241637469766974795F30336C3779676B5F6469222062706D6E456C656D656E743D2241637469766974795F30336C3779676B223E0A20202020202020203C6F6D6764633A426F756E647320783D223130352220793D22333430222077696474683D2231303022206865696768743D22383022202F3E0A20202020202020203C62706D6E64693A42504D4E4C6162656C202F3E0A2020202020203C2F62706D6E64693A42504D4E53686170653E0A2020202020203C62706D6E64693A42504D4E53686170652069643D224576656E745F303437666575675F6469222062706D6E456C656D656E743D224576656E745F30343766657567223E0A20202020202020203C6F6D6764633A426F756E647320783D223133372220793D22343630222077696474683D22333622206865696768743D22333622202F3E0A20202020202020203C62706D6E64693A42504D4E4C6162656C3E0A202020202020202020203C6F6D6764633A426F756E647320783D223134342220793D22353036222077696474683D22323222206865696768743D22313422202F3E0A20202020202020203C2F62706D6E64693A42504D4E4C6162656C3E0A2020202020203C2F62706D6E64693A42504D4E53686170653E0A2020202020203C62706D6E64693A42504D4E456467652069643D22466C6F775F316D6E727078705F6469222062706D6E456C656D656E743D22466C6F775F316D6E72707870223E0A20202020202020203C64693A776179706F696E7420783D223135352220793D22363022202F3E0A20202020202020203C64693A776179706F696E7420783D223135352220793D2231303022202F3E0A2020202020203C2F62706D6E64693A42504D4E456467653E0A2020202020203C62706D6E64693A42504D4E456467652069643D22466C6F775F3077617A7436785F6469222062706D6E456C656D656E743D22466C6F775F3077617A743678223E0A20202020202020203C64693A776179706F696E7420783D223135352220793D2231383022202F3E0A20202020202020203C64693A776179706F696E7420783D223135352220793D2232323022202F3E0A2020202020203C2F62706D6E64693A42504D4E456467653E0A2020202020203C62706D6E64693A42504D4E456467652069643D22466C6F775F3179687266786B5F6469222062706D6E456C656D656E743D22466C6F775F3179687266786B223E0A20202020202020203C64693A776179706F696E7420783D223135352220793D2233303022202F3E0A20202020202020203C64693A776179706F696E7420783D223135352220793D2233343022202F3E0A2020202020203C2F62706D6E64693A42504D4E456467653E0A2020202020203C62706D6E64693A42504D4E456467652069643D22466C6F775F3069793133697A5F6469222062706D6E456C656D656E743D22466C6F775F3069793133697A223E0A20202020202020203C64693A776179706F696E7420783D223135352220793D2234323022202F3E0A20202020202020203C64693A776179706F696E7420783D223135352220793D2234363022202F3E0A2020202020203C2F62706D6E64693A42504D4E456467653E0A202020203C2F62706D6E64693A42504D4E506C616E653E0A20203C2F62706D6E64693A42504D4E4469616772616D3E0A3C2F646566696E6974696F6E733E0A, 0);
INSERT INTO `ACT_GE_BYTEARRAY` (`ID_`, `REV_`, `NAME_`, `DEPLOYMENT_ID_`, `BYTES_`, `GENERATED_`) VALUES ('7019', 1, '财务部考核.cw_assess.png', '7017', 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
COMMIT;

-- ----------------------------
-- Table structure for ACT_GE_PROPERTY
-- ----------------------------
DROP TABLE IF EXISTS `ACT_GE_PROPERTY`;
CREATE TABLE `ACT_GE_PROPERTY` (
                                   `NAME_` varchar(64) COLLATE utf8_bin NOT NULL,
                                   `VALUE_` varchar(300) COLLATE utf8_bin DEFAULT NULL,
                                   `REV_` int(11) DEFAULT NULL,
                                   PRIMARY KEY (`NAME_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_GE_PROPERTY
-- ----------------------------
BEGIN;
INSERT INTO `ACT_GE_PROPERTY` (`NAME_`, `VALUE_`, `REV_`) VALUES ('batch.schema.version', '6.7.2.3', 1);
INSERT INTO `ACT_GE_PROPERTY` (`NAME_`, `VALUE_`, `REV_`) VALUES ('cfg.execution-related-entities-count', 'true', 1);
INSERT INTO `ACT_GE_PROPERTY` (`NAME_`, `VALUE_`, `REV_`) VALUES ('cfg.task-related-entities-count', 'true', 1);
INSERT INTO `ACT_GE_PROPERTY` (`NAME_`, `VALUE_`, `REV_`) VALUES ('common.schema.version', '6.8.0.0', 1);
INSERT INTO `ACT_GE_PROPERTY` (`NAME_`, `VALUE_`, `REV_`) VALUES ('entitylink.schema.version', '6.8.0.0', 1);
INSERT INTO `ACT_GE_PROPERTY` (`NAME_`, `VALUE_`, `REV_`) VALUES ('eventsubscription.schema.version', '6.8.0.0', 1);
INSERT INTO `ACT_GE_PROPERTY` (`NAME_`, `VALUE_`, `REV_`) VALUES ('identitylink.schema.version', '6.8.0.0', 1);
INSERT INTO `ACT_GE_PROPERTY` (`NAME_`, `VALUE_`, `REV_`) VALUES ('job.schema.version', '6.8.0.0', 1);
INSERT INTO `ACT_GE_PROPERTY` (`NAME_`, `VALUE_`, `REV_`) VALUES ('next.dbid', '1001', 4);
INSERT INTO `ACT_GE_PROPERTY` (`NAME_`, `VALUE_`, `REV_`) VALUES ('schema.history', 'upgrade(6.7.2.0->6.8.0.0)', 2);
INSERT INTO `ACT_GE_PROPERTY` (`NAME_`, `VALUE_`, `REV_`) VALUES ('schema.version', '6.8.0.0', 2);
INSERT INTO `ACT_GE_PROPERTY` (`NAME_`, `VALUE_`, `REV_`) VALUES ('task.schema.version', '6.8.0.0', 1);
INSERT INTO `ACT_GE_PROPERTY` (`NAME_`, `VALUE_`, `REV_`) VALUES ('variable.schema.version', '6.8.0.0', 1);
COMMIT;

-- ----------------------------
-- Table structure for ACT_HI_ACTINST
-- ----------------------------
DROP TABLE IF EXISTS `ACT_HI_ACTINST`;
CREATE TABLE `ACT_HI_ACTINST` (
                                  `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                  `REV_` int(11) DEFAULT '1',
                                  `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                  `PROC_INST_ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                  `EXECUTION_ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                  `ACT_ID_` varchar(255) COLLATE utf8_bin NOT NULL,
                                  `TASK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `CALL_PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `ACT_NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `ACT_TYPE_` varchar(255) COLLATE utf8_bin NOT NULL,
                                  `ASSIGNEE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `START_TIME_` datetime(3) NOT NULL,
                                  `END_TIME_` datetime(3) DEFAULT NULL,
                                  `TRANSACTION_ORDER_` int(11) DEFAULT NULL,
                                  `DURATION_` bigint(20) DEFAULT NULL,
                                  `DELETE_REASON_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                  `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                  PRIMARY KEY (`ID_`),
                                  KEY `ACT_IDX_HI_ACT_INST_START` (`START_TIME_`),
                                  KEY `ACT_IDX_HI_ACT_INST_END` (`END_TIME_`),
                                  KEY `ACT_IDX_HI_ACT_INST_PROCINST` (`PROC_INST_ID_`,`ACT_ID_`),
                                  KEY `ACT_IDX_HI_ACT_INST_EXEC` (`EXECUTION_ID_`,`ACT_ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_HI_ACTINST
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_HI_ATTACHMENT
-- ----------------------------
DROP TABLE IF EXISTS `ACT_HI_ATTACHMENT`;
CREATE TABLE `ACT_HI_ATTACHMENT` (
                                     `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                     `REV_` int(11) DEFAULT NULL,
                                     `USER_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `DESCRIPTION_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                     `TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `TASK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                     `PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                     `URL_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                     `CONTENT_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                     `TIME_` datetime(3) DEFAULT NULL,
                                     PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_HI_ATTACHMENT
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_HI_COMMENT
-- ----------------------------
DROP TABLE IF EXISTS `ACT_HI_COMMENT`;
CREATE TABLE `ACT_HI_COMMENT` (
                                  `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                  `TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `TIME_` datetime(3) NOT NULL,
                                  `USER_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `TASK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `ACTION_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `MESSAGE_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                  `FULL_MSG_` longblob,
                                  PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_HI_COMMENT
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_HI_DETAIL
-- ----------------------------
DROP TABLE IF EXISTS `ACT_HI_DETAIL`;
CREATE TABLE `ACT_HI_DETAIL` (
                                 `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                 `TYPE_` varchar(255) COLLATE utf8_bin NOT NULL,
                                 `PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                 `EXECUTION_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                 `TASK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                 `ACT_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                 `NAME_` varchar(255) COLLATE utf8_bin NOT NULL,
                                 `VAR_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                 `REV_` int(11) DEFAULT NULL,
                                 `TIME_` datetime(3) NOT NULL,
                                 `BYTEARRAY_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                 `DOUBLE_` double DEFAULT NULL,
                                 `LONG_` bigint(20) DEFAULT NULL,
                                 `TEXT_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                 `TEXT2_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                 PRIMARY KEY (`ID_`),
                                 KEY `ACT_IDX_HI_DETAIL_PROC_INST` (`PROC_INST_ID_`),
                                 KEY `ACT_IDX_HI_DETAIL_ACT_INST` (`ACT_INST_ID_`),
                                 KEY `ACT_IDX_HI_DETAIL_TIME` (`TIME_`),
                                 KEY `ACT_IDX_HI_DETAIL_NAME` (`NAME_`),
                                 KEY `ACT_IDX_HI_DETAIL_TASK_ID` (`TASK_ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_HI_DETAIL
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_HI_ENTITYLINK
-- ----------------------------
DROP TABLE IF EXISTS `ACT_HI_ENTITYLINK`;
CREATE TABLE `ACT_HI_ENTITYLINK` (
                                     `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                     `LINK_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `CREATE_TIME_` datetime(3) DEFAULT NULL,
                                     `SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `SUB_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `SCOPE_DEFINITION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `PARENT_ELEMENT_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `REF_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `REF_SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `REF_SCOPE_DEFINITION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `ROOT_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `ROOT_SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `HIERARCHY_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     PRIMARY KEY (`ID_`),
                                     KEY `ACT_IDX_HI_ENT_LNK_SCOPE` (`SCOPE_ID_`,`SCOPE_TYPE_`,`LINK_TYPE_`),
                                     KEY `ACT_IDX_HI_ENT_LNK_REF_SCOPE` (`REF_SCOPE_ID_`,`REF_SCOPE_TYPE_`,`LINK_TYPE_`),
                                     KEY `ACT_IDX_HI_ENT_LNK_ROOT_SCOPE` (`ROOT_SCOPE_ID_`,`ROOT_SCOPE_TYPE_`,`LINK_TYPE_`),
                                     KEY `ACT_IDX_HI_ENT_LNK_SCOPE_DEF` (`SCOPE_DEFINITION_ID_`,`SCOPE_TYPE_`,`LINK_TYPE_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_HI_ENTITYLINK
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_HI_IDENTITYLINK
-- ----------------------------
DROP TABLE IF EXISTS `ACT_HI_IDENTITYLINK`;
CREATE TABLE `ACT_HI_IDENTITYLINK` (
                                       `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                       `GROUP_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `USER_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `TASK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `CREATE_TIME_` datetime(3) DEFAULT NULL,
                                       `PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `SUB_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `SCOPE_DEFINITION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       PRIMARY KEY (`ID_`),
                                       KEY `ACT_IDX_HI_IDENT_LNK_USER` (`USER_ID_`),
                                       KEY `ACT_IDX_HI_IDENT_LNK_SCOPE` (`SCOPE_ID_`,`SCOPE_TYPE_`),
                                       KEY `ACT_IDX_HI_IDENT_LNK_SUB_SCOPE` (`SUB_SCOPE_ID_`,`SCOPE_TYPE_`),
                                       KEY `ACT_IDX_HI_IDENT_LNK_SCOPE_DEF` (`SCOPE_DEFINITION_ID_`,`SCOPE_TYPE_`),
                                       KEY `ACT_IDX_HI_IDENT_LNK_TASK` (`TASK_ID_`),
                                       KEY `ACT_IDX_HI_IDENT_LNK_PROCINST` (`PROC_INST_ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_HI_IDENTITYLINK
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_HI_PROCINST
-- ----------------------------
DROP TABLE IF EXISTS `ACT_HI_PROCINST`;
CREATE TABLE `ACT_HI_PROCINST` (
                                   `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                   `REV_` int(11) DEFAULT '1',
                                   `PROC_INST_ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                   `BUSINESS_KEY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                   `START_TIME_` datetime(3) NOT NULL,
                                   `END_TIME_` datetime(3) DEFAULT NULL,
                                   `DURATION_` bigint(20) DEFAULT NULL,
                                   `START_USER_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `START_ACT_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `END_ACT_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `SUPER_PROCESS_INSTANCE_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                   `DELETE_REASON_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                   `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                   `NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `CALLBACK_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `CALLBACK_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `REFERENCE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `REFERENCE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `PROPAGATED_STAGE_INST_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `BUSINESS_STATUS_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   PRIMARY KEY (`ID_`),
                                   UNIQUE KEY `PROC_INST_ID_` (`PROC_INST_ID_`),
                                   KEY `ACT_IDX_HI_PRO_INST_END` (`END_TIME_`),
                                   KEY `ACT_IDX_HI_PRO_I_BUSKEY` (`BUSINESS_KEY_`),
                                   KEY `ACT_IDX_HI_PRO_SUPER_PROCINST` (`SUPER_PROCESS_INSTANCE_ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_HI_PROCINST
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_HI_TASKINST
-- ----------------------------
DROP TABLE IF EXISTS `ACT_HI_TASKINST`;
CREATE TABLE `ACT_HI_TASKINST` (
                                   `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                   `REV_` int(11) DEFAULT '1',
                                   `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                   `TASK_DEF_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                   `TASK_DEF_KEY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                   `EXECUTION_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                   `SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `SUB_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `SCOPE_DEFINITION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `PROPAGATED_STAGE_INST_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `PARENT_TASK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                   `DESCRIPTION_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                   `OWNER_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `ASSIGNEE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `START_TIME_` datetime(3) NOT NULL,
                                   `CLAIM_TIME_` datetime(3) DEFAULT NULL,
                                   `END_TIME_` datetime(3) DEFAULT NULL,
                                   `DURATION_` bigint(20) DEFAULT NULL,
                                   `DELETE_REASON_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                   `PRIORITY_` int(11) DEFAULT NULL,
                                   `DUE_DATE_` datetime(3) DEFAULT NULL,
                                   `FORM_KEY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `CATEGORY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                   `LAST_UPDATED_TIME_` datetime(3) DEFAULT NULL,
                                   PRIMARY KEY (`ID_`),
                                   KEY `ACT_IDX_HI_TASK_SCOPE` (`SCOPE_ID_`,`SCOPE_TYPE_`),
                                   KEY `ACT_IDX_HI_TASK_SUB_SCOPE` (`SUB_SCOPE_ID_`,`SCOPE_TYPE_`),
                                   KEY `ACT_IDX_HI_TASK_SCOPE_DEF` (`SCOPE_DEFINITION_ID_`,`SCOPE_TYPE_`),
                                   KEY `ACT_IDX_HI_TASK_INST_PROCINST` (`PROC_INST_ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_HI_TASKINST
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_HI_TSK_LOG
-- ----------------------------
DROP TABLE IF EXISTS `ACT_HI_TSK_LOG`;
CREATE TABLE `ACT_HI_TSK_LOG` (
                                  `ID_` bigint(20) NOT NULL AUTO_INCREMENT,
                                  `TYPE_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `TASK_ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                  `TIME_STAMP_` timestamp(3) NOT NULL DEFAULT CURRENT_TIMESTAMP(3) ON UPDATE CURRENT_TIMESTAMP(3),
                                  `USER_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `DATA_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                  `EXECUTION_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `SCOPE_DEFINITION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `SUB_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                  PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_HI_TSK_LOG
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_HI_VARINST
-- ----------------------------
DROP TABLE IF EXISTS `ACT_HI_VARINST`;
CREATE TABLE `ACT_HI_VARINST` (
                                  `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                  `REV_` int(11) DEFAULT '1',
                                  `PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `EXECUTION_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `TASK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `NAME_` varchar(255) COLLATE utf8_bin NOT NULL,
                                  `VAR_TYPE_` varchar(100) COLLATE utf8_bin DEFAULT NULL,
                                  `SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `SUB_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `BYTEARRAY_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `DOUBLE_` double DEFAULT NULL,
                                  `LONG_` bigint(20) DEFAULT NULL,
                                  `TEXT_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                  `TEXT2_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                  `CREATE_TIME_` datetime(3) DEFAULT NULL,
                                  `LAST_UPDATED_TIME_` datetime(3) DEFAULT NULL,
                                  PRIMARY KEY (`ID_`),
                                  KEY `ACT_IDX_HI_PROCVAR_NAME_TYPE` (`NAME_`,`VAR_TYPE_`),
                                  KEY `ACT_IDX_HI_VAR_SCOPE_ID_TYPE` (`SCOPE_ID_`,`SCOPE_TYPE_`),
                                  KEY `ACT_IDX_HI_VAR_SUB_ID_TYPE` (`SUB_SCOPE_ID_`,`SCOPE_TYPE_`),
                                  KEY `ACT_IDX_HI_PROCVAR_PROC_INST` (`PROC_INST_ID_`),
                                  KEY `ACT_IDX_HI_PROCVAR_TASK_ID` (`TASK_ID_`),
                                  KEY `ACT_IDX_HI_PROCVAR_EXE` (`EXECUTION_ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_HI_VARINST
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_ID_BYTEARRAY
-- ----------------------------
DROP TABLE IF EXISTS `ACT_ID_BYTEARRAY`;
CREATE TABLE `ACT_ID_BYTEARRAY` (
                                    `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                    `REV_` int(11) DEFAULT NULL,
                                    `NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `BYTES_` longblob,
                                    PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_ID_BYTEARRAY
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_ID_GROUP
-- ----------------------------
DROP TABLE IF EXISTS `ACT_ID_GROUP`;
CREATE TABLE `ACT_ID_GROUP` (
                                `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                `REV_` int(11) DEFAULT NULL,
                                `NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                `TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_ID_GROUP
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_ID_INFO
-- ----------------------------
DROP TABLE IF EXISTS `ACT_ID_INFO`;
CREATE TABLE `ACT_ID_INFO` (
                               `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                               `REV_` int(11) DEFAULT NULL,
                               `USER_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                               `TYPE_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                               `KEY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `VALUE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `PASSWORD_` longblob,
                               `PARENT_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_ID_INFO
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_ID_MEMBERSHIP
-- ----------------------------
DROP TABLE IF EXISTS `ACT_ID_MEMBERSHIP`;
CREATE TABLE `ACT_ID_MEMBERSHIP` (
                                     `USER_ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                     `GROUP_ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                     PRIMARY KEY (`USER_ID_`,`GROUP_ID_`),
                                     KEY `ACT_FK_MEMB_GROUP` (`GROUP_ID_`),
                                     CONSTRAINT `ACT_FK_MEMB_GROUP` FOREIGN KEY (`GROUP_ID_`) REFERENCES `ACT_ID_GROUP` (`ID_`),
                                     CONSTRAINT `ACT_FK_MEMB_USER` FOREIGN KEY (`USER_ID_`) REFERENCES `ACT_ID_USER` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_ID_MEMBERSHIP
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_ID_PRIV
-- ----------------------------
DROP TABLE IF EXISTS `ACT_ID_PRIV`;
CREATE TABLE `ACT_ID_PRIV` (
                               `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                               `NAME_` varchar(255) COLLATE utf8_bin NOT NULL,
                               PRIMARY KEY (`ID_`),
                               UNIQUE KEY `ACT_UNIQ_PRIV_NAME` (`NAME_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_ID_PRIV
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_ID_PRIV_MAPPING
-- ----------------------------
DROP TABLE IF EXISTS `ACT_ID_PRIV_MAPPING`;
CREATE TABLE `ACT_ID_PRIV_MAPPING` (
                                       `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                       `PRIV_ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                       `USER_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `GROUP_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       PRIMARY KEY (`ID_`),
                                       KEY `ACT_FK_PRIV_MAPPING` (`PRIV_ID_`),
                                       KEY `ACT_IDX_PRIV_USER` (`USER_ID_`),
                                       KEY `ACT_IDX_PRIV_GROUP` (`GROUP_ID_`),
                                       CONSTRAINT `ACT_FK_PRIV_MAPPING` FOREIGN KEY (`PRIV_ID_`) REFERENCES `ACT_ID_PRIV` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_ID_PRIV_MAPPING
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_ID_PROPERTY
-- ----------------------------
DROP TABLE IF EXISTS `ACT_ID_PROPERTY`;
CREATE TABLE `ACT_ID_PROPERTY` (
                                   `NAME_` varchar(64) COLLATE utf8_bin NOT NULL,
                                   `VALUE_` varchar(300) COLLATE utf8_bin DEFAULT NULL,
                                   `REV_` int(11) DEFAULT NULL,
                                   PRIMARY KEY (`NAME_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_ID_PROPERTY
-- ----------------------------
BEGIN;
INSERT INTO `ACT_ID_PROPERTY` (`NAME_`, `VALUE_`, `REV_`) VALUES ('schema.version', '6.8.0.0', 1);
COMMIT;

-- ----------------------------
-- Table structure for ACT_ID_TOKEN
-- ----------------------------
DROP TABLE IF EXISTS `ACT_ID_TOKEN`;
CREATE TABLE `ACT_ID_TOKEN` (
                                `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                `REV_` int(11) DEFAULT NULL,
                                `TOKEN_VALUE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                `TOKEN_DATE_` timestamp(3) NOT NULL DEFAULT CURRENT_TIMESTAMP(3) ON UPDATE CURRENT_TIMESTAMP(3),
                                `IP_ADDRESS_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                `USER_AGENT_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                `USER_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                `TOKEN_DATA_` varchar(2000) COLLATE utf8_bin DEFAULT NULL,
                                PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_ID_TOKEN
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_ID_USER
-- ----------------------------
DROP TABLE IF EXISTS `ACT_ID_USER`;
CREATE TABLE `ACT_ID_USER` (
                               `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                               `REV_` int(11) DEFAULT NULL,
                               `FIRST_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `LAST_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `DISPLAY_NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `EMAIL_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `PWD_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `PICTURE_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                               `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                               PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_ID_USER
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_PROCDEF_INFO
-- ----------------------------
DROP TABLE IF EXISTS `ACT_PROCDEF_INFO`;
CREATE TABLE `ACT_PROCDEF_INFO` (
                                    `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                    `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                    `REV_` int(11) DEFAULT NULL,
                                    `INFO_JSON_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                    PRIMARY KEY (`ID_`),
                                    UNIQUE KEY `ACT_UNIQ_INFO_PROCDEF` (`PROC_DEF_ID_`),
                                    KEY `ACT_IDX_INFO_PROCDEF` (`PROC_DEF_ID_`),
                                    KEY `ACT_FK_INFO_JSON_BA` (`INFO_JSON_ID_`),
                                    CONSTRAINT `ACT_FK_INFO_JSON_BA` FOREIGN KEY (`INFO_JSON_ID_`) REFERENCES `ACT_GE_BYTEARRAY` (`ID_`),
                                    CONSTRAINT `ACT_FK_INFO_PROCDEF` FOREIGN KEY (`PROC_DEF_ID_`) REFERENCES `ACT_RE_PROCDEF` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_PROCDEF_INFO
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_RE_DEPLOYMENT
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RE_DEPLOYMENT`;
CREATE TABLE `ACT_RE_DEPLOYMENT` (
                                     `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                     `NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `CATEGORY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `KEY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                     `DEPLOY_TIME_` timestamp(3) NULL DEFAULT NULL,
                                     `DERIVED_FROM_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                     `DERIVED_FROM_ROOT_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                     `PARENT_DEPLOYMENT_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `ENGINE_VERSION_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RE_DEPLOYMENT
-- ----------------------------
BEGIN;
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('2001', '承接合同评审', 'business', NULL, '', '2024-03-15 14:34:45.390', NULL, NULL, '2001', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('2005', '分包合同评审', 'business', NULL, '', '2024-04-19 16:37:02.988', NULL, NULL, '2005', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('2009', '品牌项目支付', 'business', NULL, '', '2024-04-28 14:51:31.686', NULL, NULL, '2009', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('3001', '项目流转', 'project', NULL, '', '2024-03-22 13:23:32.390', NULL, NULL, '3001', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('3005', '安全交底', 'project', NULL, '', '2024-03-22 11:42:24.390', NULL, NULL, '3005', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('3009', '技术交底', 'project', NULL, '', '2024-03-22 11:32:12.390', NULL, NULL, '3009', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('3013', '技术方案', 'project', NULL, '', '2024-03-22 10:02:23.390', NULL, NULL, '3013', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('3017', '项目预算', 'project', NULL, '', '2024-04-28 10:45:05.153', NULL, NULL, '3017', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('3021', '成果归档', 'project', NULL, '', '2024-04-28 11:17:30.184', NULL, NULL, '3021', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('3025', '项目结算', 'project', NULL, '', '2024-04-29 10:29:28.330', NULL, NULL, '3025', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('3029', '项目变更', 'project', NULL, '', '2024-04-29 10:29:28.330', NULL, NULL, '3029', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('4001', '借款审批', 'finance', NULL, '', '2024-04-07 09:19:36.390', NULL, NULL, '4001', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('4005', '保证金审批', 'finance', NULL, '', '2024-04-28 13:56:39.390', NULL, NULL, '4005', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('5001', '用车审批', 'oa', NULL, '', '2024-02-23 14:13:15.003', NULL, NULL, '5001', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('6001', '设备审批', 'oa', NULL, '', '2024-03-06 09:32:51.728', NULL, NULL, '6001', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('7001', '生产部门考核', 'assess', NULL, '', '2024-02-19 14:09:37.814', NULL, NULL, '7001', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('7005', '经营发展部考核', 'assess', NULL, '', '2024-02-21 10:11:19.368', NULL, NULL, '7005', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('7009', '综合事务部考核', 'assess', NULL, '', '2024-02-21 10:12:05.220', NULL, NULL, '7009', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('7013', '技术质量部考核', 'assess', NULL, '', '2024-02-21 10:12:30.766', NULL, NULL, '7013', NULL);
INSERT INTO `ACT_RE_DEPLOYMENT` (`ID_`, `NAME_`, `CATEGORY_`, `KEY_`, `TENANT_ID_`, `DEPLOY_TIME_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `PARENT_DEPLOYMENT_ID_`, `ENGINE_VERSION_`) VALUES ('7017', '财务部考核', 'assess', NULL, '', '2024-02-21 10:13:27.359', NULL, NULL, '7017', NULL);
COMMIT;

-- ----------------------------
-- Table structure for ACT_RE_MODEL
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RE_MODEL`;
CREATE TABLE `ACT_RE_MODEL` (
                                `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                `REV_` int(11) DEFAULT NULL,
                                `NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                `KEY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                `CATEGORY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                `CREATE_TIME_` timestamp(3) NULL DEFAULT NULL,
                                `LAST_UPDATE_TIME_` timestamp(3) NULL DEFAULT NULL,
                                `VERSION_` int(11) DEFAULT NULL,
                                `META_INFO_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                `DEPLOYMENT_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                `EDITOR_SOURCE_VALUE_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                `EDITOR_SOURCE_EXTRA_VALUE_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                PRIMARY KEY (`ID_`),
                                KEY `ACT_FK_MODEL_SOURCE` (`EDITOR_SOURCE_VALUE_ID_`),
                                KEY `ACT_FK_MODEL_SOURCE_EXTRA` (`EDITOR_SOURCE_EXTRA_VALUE_ID_`),
                                KEY `ACT_FK_MODEL_DEPLOYMENT` (`DEPLOYMENT_ID_`),
                                CONSTRAINT `ACT_FK_MODEL_DEPLOYMENT` FOREIGN KEY (`DEPLOYMENT_ID_`) REFERENCES `ACT_RE_DEPLOYMENT` (`ID_`),
                                CONSTRAINT `ACT_FK_MODEL_SOURCE` FOREIGN KEY (`EDITOR_SOURCE_VALUE_ID_`) REFERENCES `ACT_GE_BYTEARRAY` (`ID_`),
                                CONSTRAINT `ACT_FK_MODEL_SOURCE_EXTRA` FOREIGN KEY (`EDITOR_SOURCE_EXTRA_VALUE_ID_`) REFERENCES `ACT_GE_BYTEARRAY` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RE_MODEL
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_RE_PROCDEF
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RE_PROCDEF`;
CREATE TABLE `ACT_RE_PROCDEF` (
                                  `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                  `REV_` int(11) DEFAULT NULL,
                                  `CATEGORY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `KEY_` varchar(255) COLLATE utf8_bin NOT NULL,
                                  `VERSION_` int(11) NOT NULL,
                                  `DEPLOYMENT_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `RESOURCE_NAME_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                  `DGRM_RESOURCE_NAME_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                  `DESCRIPTION_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                  `HAS_START_FORM_KEY_` tinyint(4) DEFAULT NULL,
                                  `HAS_GRAPHICAL_NOTATION_` tinyint(4) DEFAULT NULL,
                                  `SUSPENSION_STATE_` int(11) DEFAULT NULL,
                                  `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                  `ENGINE_VERSION_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `DERIVED_FROM_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `DERIVED_FROM_ROOT_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `DERIVED_VERSION_` int(11) NOT NULL DEFAULT '0',
                                  PRIMARY KEY (`ID_`),
                                  UNIQUE KEY `ACT_UNIQ_PROCDEF` (`KEY_`,`VERSION_`,`DERIVED_VERSION_`,`TENANT_ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RE_PROCDEF
-- ----------------------------
BEGIN;
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('contract_comment:1:2004', 2, 'business', '承接合同评审', 'contract_comment', 1, '2001', '承接合同评审.bpmn', '承接合同评审.contract_comment.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('sub_contract:1:2008', 2, 'business', '分包合同评审', 'sub_contract', 1, '2005', '分包合同评审.bpmn', '分包合同评审.sub_contract.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('brand_payment:1:2012', 2, 'business', '品牌项目支付', 'brand_payment', 1, '2009', '品牌项目支付.bpmn', '品牌项目支付.brand_payment.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('project_circulation:1:3004', 2, 'project', '项目流转', 'project_circulation', 1, '3001', '项目流转.bpmn', '项目流转.project_circulation.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('safe_disclosure:1:3008', 2, 'project', '安全交底', 'safe_disclosure', 1, '3005', '安全交底.bpmn', '安全交底.safe_disclosure.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('tech_disclosure:1:3012', 2, 'project', '技术交底', 'tech_disclosure', 1, '3009', '技术交底.bpmn', '技术交底.tech_disclosure.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('tech_plan:1:3016', 2, 'project', '技术方案', 'tech_plan', 1, '3013', '技术方案.bpmn', '技术方案.tech_plan.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('project_budget:1:3020', 2, 'project', '项目预算', 'project_budget', 1, '3017', '项目预算.bpmn', '项目预算.project_budget.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('achievement_archive:1:3024', 2, 'project', '成果归档', 'achievement_archive', 1, '3021', '成果归档.bpmn', '成果归档.achievement_archive.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('project_settle:1:3028', 2, 'project', '项目结算', 'project_settle', 1, '3025', '项目结算.bpmn', '项目结算.project_settle.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('project_change:1:3032', 2, 'project', '项目变更', 'project_change', 1, '3029', '项目变更.bpmn', '项目变更.project_change.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('borrow_approval:1:4004', 2, 'finance', '借款审批', 'borrow_approval', 1, '4001', '借款审批.bpmn', '借款审批.borrow_approval.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('deposit_approval:1:4008', 2, 'finance', '保证金审批', 'deposit_approval', 1, '4005', '保证金审批.bpmn', '保证金审批.deposit_approval.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('car_approval:1:5004', 2, 'oa', '用车审批', 'car_approval', 1, '5001', '用车审批.bpmn', '用车审批.car_approval.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('device_approval:1:6004', 2, 'oa', '设备审批', 'device_approval', 1, '6001', '设备审批.bpmn', '设备审批.device_approval.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('sc_assess:1:7004', 2, 'assess', '生产部门考核', 'sc_assess', 1, '7001', '生产部门考核.bpmn', '生产部门考核.sc_assess.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('jy_assess:1:7008', 2, 'assess', '经营发展部考核', 'jy_assess', 1, '7005', '经营发展部考核.bpmn', '经营发展部考核.jy_assess.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('zh_assess:1:7012', 2, 'assess', '综合事务部考核', 'zh_assess', 1, '7009', '综合事务部考核.bpmn', '综合事务部考核.zh_assess.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('js_assess:1:7016', 2, 'assess', '技术质量部考核', 'js_assess', 1, '7013', '技术质量部考核.bpmn', '技术质量部考核.js_assess.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
INSERT INTO `ACT_RE_PROCDEF` (`ID_`, `REV_`, `CATEGORY_`, `NAME_`, `KEY_`, `VERSION_`, `DEPLOYMENT_ID_`, `RESOURCE_NAME_`, `DGRM_RESOURCE_NAME_`, `DESCRIPTION_`, `HAS_START_FORM_KEY_`, `HAS_GRAPHICAL_NOTATION_`, `SUSPENSION_STATE_`, `TENANT_ID_`, `ENGINE_VERSION_`, `DERIVED_FROM_`, `DERIVED_FROM_ROOT_`, `DERIVED_VERSION_`) VALUES ('cw_assess:1:7020', 2, 'assess', '财务部考核', 'cw_assess', 1, '7017', '财务部考核.bpmn', '财务部考核.cw_assess.png', NULL, 0, 1, 1, '', NULL, NULL, NULL, 0);
COMMIT;

-- ----------------------------
-- Table structure for ACT_RU_ACTINST
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RU_ACTINST`;
CREATE TABLE `ACT_RU_ACTINST` (
                                  `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                  `REV_` int(11) DEFAULT '1',
                                  `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                  `PROC_INST_ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                  `EXECUTION_ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                  `ACT_ID_` varchar(255) COLLATE utf8_bin NOT NULL,
                                  `TASK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `CALL_PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                  `ACT_NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `ACT_TYPE_` varchar(255) COLLATE utf8_bin NOT NULL,
                                  `ASSIGNEE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                  `START_TIME_` datetime(3) NOT NULL,
                                  `END_TIME_` datetime(3) DEFAULT NULL,
                                  `DURATION_` bigint(20) DEFAULT NULL,
                                  `TRANSACTION_ORDER_` int(11) DEFAULT NULL,
                                  `DELETE_REASON_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                  `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                  PRIMARY KEY (`ID_`),
                                  KEY `ACT_IDX_RU_ACTI_START` (`START_TIME_`),
                                  KEY `ACT_IDX_RU_ACTI_END` (`END_TIME_`),
                                  KEY `ACT_IDX_RU_ACTI_PROC` (`PROC_INST_ID_`),
                                  KEY `ACT_IDX_RU_ACTI_PROC_ACT` (`PROC_INST_ID_`,`ACT_ID_`),
                                  KEY `ACT_IDX_RU_ACTI_EXEC` (`EXECUTION_ID_`),
                                  KEY `ACT_IDX_RU_ACTI_EXEC_ACT` (`EXECUTION_ID_`,`ACT_ID_`),
                                  KEY `ACT_IDX_RU_ACTI_TASK` (`TASK_ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RU_ACTINST
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_RU_DEADLETTER_JOB
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RU_DEADLETTER_JOB`;
CREATE TABLE `ACT_RU_DEADLETTER_JOB` (
                                         `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                         `REV_` int(11) DEFAULT NULL,
                                         `CATEGORY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                         `TYPE_` varchar(255) COLLATE utf8_bin NOT NULL,
                                         `EXCLUSIVE_` tinyint(1) DEFAULT NULL,
                                         `EXECUTION_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                         `PROCESS_INSTANCE_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                         `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                         `ELEMENT_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                         `ELEMENT_NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                         `SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                         `SUB_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                         `SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                         `SCOPE_DEFINITION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                         `CORRELATION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                         `EXCEPTION_STACK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                         `EXCEPTION_MSG_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                         `DUEDATE_` timestamp(3) NULL DEFAULT NULL,
                                         `REPEAT_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                         `HANDLER_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                         `HANDLER_CFG_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                         `CUSTOM_VALUES_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                         `CREATE_TIME_` timestamp(3) NULL DEFAULT NULL,
                                         `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                         PRIMARY KEY (`ID_`),
                                         KEY `ACT_IDX_DEADLETTER_JOB_EXCEPTION_STACK_ID` (`EXCEPTION_STACK_ID_`),
                                         KEY `ACT_IDX_DEADLETTER_JOB_CUSTOM_VALUES_ID` (`CUSTOM_VALUES_ID_`),
                                         KEY `ACT_IDX_DEADLETTER_JOB_CORRELATION_ID` (`CORRELATION_ID_`),
                                         KEY `ACT_IDX_DJOB_SCOPE` (`SCOPE_ID_`,`SCOPE_TYPE_`),
                                         KEY `ACT_IDX_DJOB_SUB_SCOPE` (`SUB_SCOPE_ID_`,`SCOPE_TYPE_`),
                                         KEY `ACT_IDX_DJOB_SCOPE_DEF` (`SCOPE_DEFINITION_ID_`,`SCOPE_TYPE_`),
                                         KEY `ACT_FK_DEADLETTER_JOB_EXECUTION` (`EXECUTION_ID_`),
                                         KEY `ACT_FK_DEADLETTER_JOB_PROCESS_INSTANCE` (`PROCESS_INSTANCE_ID_`),
                                         KEY `ACT_FK_DEADLETTER_JOB_PROC_DEF` (`PROC_DEF_ID_`),
                                         CONSTRAINT `ACT_FK_DEADLETTER_JOB_CUSTOM_VALUES` FOREIGN KEY (`CUSTOM_VALUES_ID_`) REFERENCES `ACT_GE_BYTEARRAY` (`ID_`),
                                         CONSTRAINT `ACT_FK_DEADLETTER_JOB_EXCEPTION` FOREIGN KEY (`EXCEPTION_STACK_ID_`) REFERENCES `ACT_GE_BYTEARRAY` (`ID_`),
                                         CONSTRAINT `ACT_FK_DEADLETTER_JOB_EXECUTION` FOREIGN KEY (`EXECUTION_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`),
                                         CONSTRAINT `ACT_FK_DEADLETTER_JOB_PROCESS_INSTANCE` FOREIGN KEY (`PROCESS_INSTANCE_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`),
                                         CONSTRAINT `ACT_FK_DEADLETTER_JOB_PROC_DEF` FOREIGN KEY (`PROC_DEF_ID_`) REFERENCES `ACT_RE_PROCDEF` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RU_DEADLETTER_JOB
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_RU_ENTITYLINK
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RU_ENTITYLINK`;
CREATE TABLE `ACT_RU_ENTITYLINK` (
                                     `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                     `REV_` int(11) DEFAULT NULL,
                                     `CREATE_TIME_` datetime(3) DEFAULT NULL,
                                     `LINK_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `SUB_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `SCOPE_DEFINITION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `PARENT_ELEMENT_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `REF_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `REF_SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `REF_SCOPE_DEFINITION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `ROOT_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `ROOT_SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `HIERARCHY_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     PRIMARY KEY (`ID_`),
                                     KEY `ACT_IDX_ENT_LNK_SCOPE` (`SCOPE_ID_`,`SCOPE_TYPE_`,`LINK_TYPE_`),
                                     KEY `ACT_IDX_ENT_LNK_REF_SCOPE` (`REF_SCOPE_ID_`,`REF_SCOPE_TYPE_`,`LINK_TYPE_`),
                                     KEY `ACT_IDX_ENT_LNK_ROOT_SCOPE` (`ROOT_SCOPE_ID_`,`ROOT_SCOPE_TYPE_`,`LINK_TYPE_`),
                                     KEY `ACT_IDX_ENT_LNK_SCOPE_DEF` (`SCOPE_DEFINITION_ID_`,`SCOPE_TYPE_`,`LINK_TYPE_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RU_ENTITYLINK
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_RU_EVENT_SUBSCR
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RU_EVENT_SUBSCR`;
CREATE TABLE `ACT_RU_EVENT_SUBSCR` (
                                       `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                       `REV_` int(11) DEFAULT NULL,
                                       `EVENT_TYPE_` varchar(255) COLLATE utf8_bin NOT NULL,
                                       `EVENT_NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `EXECUTION_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `ACTIVITY_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `CONFIGURATION_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `CREATED_` timestamp(3) NOT NULL DEFAULT CURRENT_TIMESTAMP(3),
                                       `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `SUB_SCOPE_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `SCOPE_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `SCOPE_DEFINITION_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `SCOPE_TYPE_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                       `LOCK_TIME_` timestamp(3) NULL DEFAULT NULL,
                                       `LOCK_OWNER_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       PRIMARY KEY (`ID_`),
                                       KEY `ACT_IDX_EVENT_SUBSCR_CONFIG_` (`CONFIGURATION_`),
                                       KEY `ACT_FK_EVENT_EXEC` (`EXECUTION_ID_`),
                                       KEY `ACT_IDX_EVENT_SUBSCR_SCOPEREF_` (`SCOPE_ID_`,`SCOPE_TYPE_`),
                                       CONSTRAINT `ACT_FK_EVENT_EXEC` FOREIGN KEY (`EXECUTION_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RU_EVENT_SUBSCR
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_RU_EXECUTION
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RU_EXECUTION`;
CREATE TABLE `ACT_RU_EXECUTION` (
                                    `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                    `REV_` int(11) DEFAULT NULL,
                                    `PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                    `BUSINESS_KEY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `PARENT_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                    `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                    `SUPER_EXEC_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                    `ROOT_PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                    `ACT_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `IS_ACTIVE_` tinyint(4) DEFAULT NULL,
                                    `IS_CONCURRENT_` tinyint(4) DEFAULT NULL,
                                    `IS_SCOPE_` tinyint(4) DEFAULT NULL,
                                    `IS_EVENT_SCOPE_` tinyint(4) DEFAULT NULL,
                                    `IS_MI_ROOT_` tinyint(4) DEFAULT NULL,
                                    `SUSPENSION_STATE_` int(11) DEFAULT NULL,
                                    `CACHED_ENT_STATE_` int(11) DEFAULT NULL,
                                    `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                    `NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `START_ACT_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `START_TIME_` datetime(3) DEFAULT NULL,
                                    `START_USER_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `LOCK_TIME_` timestamp(3) NULL DEFAULT NULL,
                                    `LOCK_OWNER_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `IS_COUNT_ENABLED_` tinyint(4) DEFAULT NULL,
                                    `EVT_SUBSCR_COUNT_` int(11) DEFAULT NULL,
                                    `TASK_COUNT_` int(11) DEFAULT NULL,
                                    `JOB_COUNT_` int(11) DEFAULT NULL,
                                    `TIMER_JOB_COUNT_` int(11) DEFAULT NULL,
                                    `SUSP_JOB_COUNT_` int(11) DEFAULT NULL,
                                    `DEADLETTER_JOB_COUNT_` int(11) DEFAULT NULL,
                                    `EXTERNAL_WORKER_JOB_COUNT_` int(11) DEFAULT NULL,
                                    `VAR_COUNT_` int(11) DEFAULT NULL,
                                    `ID_LINK_COUNT_` int(11) DEFAULT NULL,
                                    `CALLBACK_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `CALLBACK_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `REFERENCE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `REFERENCE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `PROPAGATED_STAGE_INST_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `BUSINESS_STATUS_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    PRIMARY KEY (`ID_`),
                                    KEY `ACT_IDX_EXEC_BUSKEY` (`BUSINESS_KEY_`),
                                    KEY `ACT_IDC_EXEC_ROOT` (`ROOT_PROC_INST_ID_`),
                                    KEY `ACT_IDX_EXEC_REF_ID_` (`REFERENCE_ID_`),
                                    KEY `ACT_FK_EXE_PROCINST` (`PROC_INST_ID_`),
                                    KEY `ACT_FK_EXE_PARENT` (`PARENT_ID_`),
                                    KEY `ACT_FK_EXE_SUPER` (`SUPER_EXEC_`),
                                    KEY `ACT_FK_EXE_PROCDEF` (`PROC_DEF_ID_`),
                                    CONSTRAINT `ACT_FK_EXE_PARENT` FOREIGN KEY (`PARENT_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`) ON DELETE CASCADE,
                                    CONSTRAINT `ACT_FK_EXE_PROCDEF` FOREIGN KEY (`PROC_DEF_ID_`) REFERENCES `ACT_RE_PROCDEF` (`ID_`),
                                    CONSTRAINT `ACT_FK_EXE_PROCINST` FOREIGN KEY (`PROC_INST_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`) ON DELETE CASCADE ON UPDATE CASCADE,
                                    CONSTRAINT `ACT_FK_EXE_SUPER` FOREIGN KEY (`SUPER_EXEC_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`) ON DELETE CASCADE
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RU_EXECUTION
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_RU_EXTERNAL_JOB
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RU_EXTERNAL_JOB`;
CREATE TABLE `ACT_RU_EXTERNAL_JOB` (
                                       `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                       `REV_` int(11) DEFAULT NULL,
                                       `CATEGORY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `TYPE_` varchar(255) COLLATE utf8_bin NOT NULL,
                                       `LOCK_EXP_TIME_` timestamp(3) NULL DEFAULT NULL,
                                       `LOCK_OWNER_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `EXCLUSIVE_` tinyint(1) DEFAULT NULL,
                                       `EXECUTION_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `PROCESS_INSTANCE_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `ELEMENT_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `ELEMENT_NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `SUB_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `SCOPE_DEFINITION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `CORRELATION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `RETRIES_` int(11) DEFAULT NULL,
                                       `EXCEPTION_STACK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `EXCEPTION_MSG_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                       `DUEDATE_` timestamp(3) NULL DEFAULT NULL,
                                       `REPEAT_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `HANDLER_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `HANDLER_CFG_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                       `CUSTOM_VALUES_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `CREATE_TIME_` timestamp(3) NULL DEFAULT NULL,
                                       `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                       PRIMARY KEY (`ID_`),
                                       KEY `ACT_IDX_EXTERNAL_JOB_EXCEPTION_STACK_ID` (`EXCEPTION_STACK_ID_`),
                                       KEY `ACT_IDX_EXTERNAL_JOB_CUSTOM_VALUES_ID` (`CUSTOM_VALUES_ID_`),
                                       KEY `ACT_IDX_EXTERNAL_JOB_CORRELATION_ID` (`CORRELATION_ID_`),
                                       KEY `ACT_IDX_EJOB_SCOPE` (`SCOPE_ID_`,`SCOPE_TYPE_`),
                                       KEY `ACT_IDX_EJOB_SUB_SCOPE` (`SUB_SCOPE_ID_`,`SCOPE_TYPE_`),
                                       KEY `ACT_IDX_EJOB_SCOPE_DEF` (`SCOPE_DEFINITION_ID_`,`SCOPE_TYPE_`),
                                       CONSTRAINT `ACT_FK_EXTERNAL_JOB_CUSTOM_VALUES` FOREIGN KEY (`CUSTOM_VALUES_ID_`) REFERENCES `ACT_GE_BYTEARRAY` (`ID_`),
                                       CONSTRAINT `ACT_FK_EXTERNAL_JOB_EXCEPTION` FOREIGN KEY (`EXCEPTION_STACK_ID_`) REFERENCES `ACT_GE_BYTEARRAY` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RU_EXTERNAL_JOB
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_RU_HISTORY_JOB
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RU_HISTORY_JOB`;
CREATE TABLE `ACT_RU_HISTORY_JOB` (
                                      `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                      `REV_` int(11) DEFAULT NULL,
                                      `LOCK_EXP_TIME_` timestamp(3) NULL DEFAULT NULL,
                                      `LOCK_OWNER_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                      `RETRIES_` int(11) DEFAULT NULL,
                                      `EXCEPTION_STACK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                      `EXCEPTION_MSG_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                      `HANDLER_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                      `HANDLER_CFG_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                      `CUSTOM_VALUES_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                      `ADV_HANDLER_CFG_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                      `CREATE_TIME_` timestamp(3) NULL DEFAULT NULL,
                                      `SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                      `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                      PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RU_HISTORY_JOB
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_RU_IDENTITYLINK
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RU_IDENTITYLINK`;
CREATE TABLE `ACT_RU_IDENTITYLINK` (
                                       `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                       `REV_` int(11) DEFAULT NULL,
                                       `GROUP_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `USER_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `TASK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                       `SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `SUB_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       `SCOPE_DEFINITION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                       PRIMARY KEY (`ID_`),
                                       KEY `ACT_IDX_IDENT_LNK_USER` (`USER_ID_`),
                                       KEY `ACT_IDX_IDENT_LNK_GROUP` (`GROUP_ID_`),
                                       KEY `ACT_IDX_IDENT_LNK_SCOPE` (`SCOPE_ID_`,`SCOPE_TYPE_`),
                                       KEY `ACT_IDX_IDENT_LNK_SUB_SCOPE` (`SUB_SCOPE_ID_`,`SCOPE_TYPE_`),
                                       KEY `ACT_IDX_IDENT_LNK_SCOPE_DEF` (`SCOPE_DEFINITION_ID_`,`SCOPE_TYPE_`),
                                       KEY `ACT_IDX_ATHRZ_PROCEDEF` (`PROC_DEF_ID_`),
                                       KEY `ACT_FK_TSKASS_TASK` (`TASK_ID_`),
                                       KEY `ACT_FK_IDL_PROCINST` (`PROC_INST_ID_`),
                                       CONSTRAINT `ACT_FK_ATHRZ_PROCEDEF` FOREIGN KEY (`PROC_DEF_ID_`) REFERENCES `ACT_RE_PROCDEF` (`ID_`),
                                       CONSTRAINT `ACT_FK_IDL_PROCINST` FOREIGN KEY (`PROC_INST_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`),
                                       CONSTRAINT `ACT_FK_TSKASS_TASK` FOREIGN KEY (`TASK_ID_`) REFERENCES `ACT_RU_TASK` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RU_IDENTITYLINK
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_RU_JOB
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RU_JOB`;
CREATE TABLE `ACT_RU_JOB` (
                              `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                              `REV_` int(11) DEFAULT NULL,
                              `CATEGORY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                              `TYPE_` varchar(255) COLLATE utf8_bin NOT NULL,
                              `LOCK_EXP_TIME_` timestamp(3) NULL DEFAULT NULL,
                              `LOCK_OWNER_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                              `EXCLUSIVE_` tinyint(1) DEFAULT NULL,
                              `EXECUTION_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                              `PROCESS_INSTANCE_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                              `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                              `ELEMENT_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                              `ELEMENT_NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                              `SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                              `SUB_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                              `SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                              `SCOPE_DEFINITION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                              `CORRELATION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                              `RETRIES_` int(11) DEFAULT NULL,
                              `EXCEPTION_STACK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                              `EXCEPTION_MSG_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                              `DUEDATE_` timestamp(3) NULL DEFAULT NULL,
                              `REPEAT_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                              `HANDLER_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                              `HANDLER_CFG_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                              `CUSTOM_VALUES_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                              `CREATE_TIME_` timestamp(3) NULL DEFAULT NULL,
                              `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                              PRIMARY KEY (`ID_`),
                              KEY `ACT_IDX_JOB_EXCEPTION_STACK_ID` (`EXCEPTION_STACK_ID_`),
                              KEY `ACT_IDX_JOB_CUSTOM_VALUES_ID` (`CUSTOM_VALUES_ID_`),
                              KEY `ACT_IDX_JOB_CORRELATION_ID` (`CORRELATION_ID_`),
                              KEY `ACT_IDX_JOB_SCOPE` (`SCOPE_ID_`,`SCOPE_TYPE_`),
                              KEY `ACT_IDX_JOB_SUB_SCOPE` (`SUB_SCOPE_ID_`,`SCOPE_TYPE_`),
                              KEY `ACT_IDX_JOB_SCOPE_DEF` (`SCOPE_DEFINITION_ID_`,`SCOPE_TYPE_`),
                              KEY `ACT_FK_JOB_EXECUTION` (`EXECUTION_ID_`),
                              KEY `ACT_FK_JOB_PROCESS_INSTANCE` (`PROCESS_INSTANCE_ID_`),
                              KEY `ACT_FK_JOB_PROC_DEF` (`PROC_DEF_ID_`),
                              CONSTRAINT `ACT_FK_JOB_CUSTOM_VALUES` FOREIGN KEY (`CUSTOM_VALUES_ID_`) REFERENCES `ACT_GE_BYTEARRAY` (`ID_`),
                              CONSTRAINT `ACT_FK_JOB_EXCEPTION` FOREIGN KEY (`EXCEPTION_STACK_ID_`) REFERENCES `ACT_GE_BYTEARRAY` (`ID_`),
                              CONSTRAINT `ACT_FK_JOB_EXECUTION` FOREIGN KEY (`EXECUTION_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`),
                              CONSTRAINT `ACT_FK_JOB_PROCESS_INSTANCE` FOREIGN KEY (`PROCESS_INSTANCE_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`),
                              CONSTRAINT `ACT_FK_JOB_PROC_DEF` FOREIGN KEY (`PROC_DEF_ID_`) REFERENCES `ACT_RE_PROCDEF` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RU_JOB
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_RU_SUSPENDED_JOB
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RU_SUSPENDED_JOB`;
CREATE TABLE `ACT_RU_SUSPENDED_JOB` (
                                        `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                        `REV_` int(11) DEFAULT NULL,
                                        `CATEGORY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                        `TYPE_` varchar(255) COLLATE utf8_bin NOT NULL,
                                        `EXCLUSIVE_` tinyint(1) DEFAULT NULL,
                                        `EXECUTION_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                        `PROCESS_INSTANCE_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                        `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                        `ELEMENT_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                        `ELEMENT_NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                        `SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                        `SUB_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                        `SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                        `SCOPE_DEFINITION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                        `CORRELATION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                        `RETRIES_` int(11) DEFAULT NULL,
                                        `EXCEPTION_STACK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                        `EXCEPTION_MSG_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                        `DUEDATE_` timestamp(3) NULL DEFAULT NULL,
                                        `REPEAT_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                        `HANDLER_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                        `HANDLER_CFG_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                        `CUSTOM_VALUES_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                        `CREATE_TIME_` timestamp(3) NULL DEFAULT NULL,
                                        `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                        PRIMARY KEY (`ID_`),
                                        KEY `ACT_IDX_SUSPENDED_JOB_EXCEPTION_STACK_ID` (`EXCEPTION_STACK_ID_`),
                                        KEY `ACT_IDX_SUSPENDED_JOB_CUSTOM_VALUES_ID` (`CUSTOM_VALUES_ID_`),
                                        KEY `ACT_IDX_SUSPENDED_JOB_CORRELATION_ID` (`CORRELATION_ID_`),
                                        KEY `ACT_IDX_SJOB_SCOPE` (`SCOPE_ID_`,`SCOPE_TYPE_`),
                                        KEY `ACT_IDX_SJOB_SUB_SCOPE` (`SUB_SCOPE_ID_`,`SCOPE_TYPE_`),
                                        KEY `ACT_IDX_SJOB_SCOPE_DEF` (`SCOPE_DEFINITION_ID_`,`SCOPE_TYPE_`),
                                        KEY `ACT_FK_SUSPENDED_JOB_EXECUTION` (`EXECUTION_ID_`),
                                        KEY `ACT_FK_SUSPENDED_JOB_PROCESS_INSTANCE` (`PROCESS_INSTANCE_ID_`),
                                        KEY `ACT_FK_SUSPENDED_JOB_PROC_DEF` (`PROC_DEF_ID_`),
                                        CONSTRAINT `ACT_FK_SUSPENDED_JOB_CUSTOM_VALUES` FOREIGN KEY (`CUSTOM_VALUES_ID_`) REFERENCES `ACT_GE_BYTEARRAY` (`ID_`),
                                        CONSTRAINT `ACT_FK_SUSPENDED_JOB_EXCEPTION` FOREIGN KEY (`EXCEPTION_STACK_ID_`) REFERENCES `ACT_GE_BYTEARRAY` (`ID_`),
                                        CONSTRAINT `ACT_FK_SUSPENDED_JOB_EXECUTION` FOREIGN KEY (`EXECUTION_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`),
                                        CONSTRAINT `ACT_FK_SUSPENDED_JOB_PROCESS_INSTANCE` FOREIGN KEY (`PROCESS_INSTANCE_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`),
                                        CONSTRAINT `ACT_FK_SUSPENDED_JOB_PROC_DEF` FOREIGN KEY (`PROC_DEF_ID_`) REFERENCES `ACT_RE_PROCDEF` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RU_SUSPENDED_JOB
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_RU_TASK
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RU_TASK`;
CREATE TABLE `ACT_RU_TASK` (
                               `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                               `REV_` int(11) DEFAULT NULL,
                               `EXECUTION_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                               `PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                               `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                               `TASK_DEF_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                               `SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `SUB_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `SCOPE_DEFINITION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `PROPAGATED_STAGE_INST_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `PARENT_TASK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                               `DESCRIPTION_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                               `TASK_DEF_KEY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `OWNER_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `ASSIGNEE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `DELEGATION_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                               `PRIORITY_` int(11) DEFAULT NULL,
                               `CREATE_TIME_` timestamp(3) NULL DEFAULT NULL,
                               `DUE_DATE_` datetime(3) DEFAULT NULL,
                               `CATEGORY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `SUSPENSION_STATE_` int(11) DEFAULT NULL,
                               `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                               `FORM_KEY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                               `CLAIM_TIME_` datetime(3) DEFAULT NULL,
                               `IS_COUNT_ENABLED_` tinyint(4) DEFAULT NULL,
                               `VAR_COUNT_` int(11) DEFAULT NULL,
                               `ID_LINK_COUNT_` int(11) DEFAULT NULL,
                               `SUB_TASK_COUNT_` int(11) DEFAULT NULL,
                               PRIMARY KEY (`ID_`),
                               KEY `ACT_IDX_TASK_CREATE` (`CREATE_TIME_`),
                               KEY `ACT_IDX_TASK_SCOPE` (`SCOPE_ID_`,`SCOPE_TYPE_`),
                               KEY `ACT_IDX_TASK_SUB_SCOPE` (`SUB_SCOPE_ID_`,`SCOPE_TYPE_`),
                               KEY `ACT_IDX_TASK_SCOPE_DEF` (`SCOPE_DEFINITION_ID_`,`SCOPE_TYPE_`),
                               KEY `ACT_FK_TASK_EXE` (`EXECUTION_ID_`),
                               KEY `ACT_FK_TASK_PROCINST` (`PROC_INST_ID_`),
                               KEY `ACT_FK_TASK_PROCDEF` (`PROC_DEF_ID_`),
                               CONSTRAINT `ACT_FK_TASK_EXE` FOREIGN KEY (`EXECUTION_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`),
                               CONSTRAINT `ACT_FK_TASK_PROCDEF` FOREIGN KEY (`PROC_DEF_ID_`) REFERENCES `ACT_RE_PROCDEF` (`ID_`),
                               CONSTRAINT `ACT_FK_TASK_PROCINST` FOREIGN KEY (`PROC_INST_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RU_TASK
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_RU_TIMER_JOB
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RU_TIMER_JOB`;
CREATE TABLE `ACT_RU_TIMER_JOB` (
                                    `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                    `REV_` int(11) DEFAULT NULL,
                                    `CATEGORY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `TYPE_` varchar(255) COLLATE utf8_bin NOT NULL,
                                    `LOCK_EXP_TIME_` timestamp(3) NULL DEFAULT NULL,
                                    `LOCK_OWNER_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `EXCLUSIVE_` tinyint(1) DEFAULT NULL,
                                    `EXECUTION_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                    `PROCESS_INSTANCE_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                    `PROC_DEF_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                    `ELEMENT_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `ELEMENT_NAME_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `SUB_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `SCOPE_DEFINITION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `CORRELATION_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `RETRIES_` int(11) DEFAULT NULL,
                                    `EXCEPTION_STACK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                    `EXCEPTION_MSG_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                    `DUEDATE_` timestamp(3) NULL DEFAULT NULL,
                                    `REPEAT_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `HANDLER_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                    `HANDLER_CFG_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                    `CUSTOM_VALUES_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                    `CREATE_TIME_` timestamp(3) NULL DEFAULT NULL,
                                    `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                    PRIMARY KEY (`ID_`),
                                    KEY `ACT_IDX_TIMER_JOB_EXCEPTION_STACK_ID` (`EXCEPTION_STACK_ID_`),
                                    KEY `ACT_IDX_TIMER_JOB_CUSTOM_VALUES_ID` (`CUSTOM_VALUES_ID_`),
                                    KEY `ACT_IDX_TIMER_JOB_CORRELATION_ID` (`CORRELATION_ID_`),
                                    KEY `ACT_IDX_TIMER_JOB_DUEDATE` (`DUEDATE_`),
                                    KEY `ACT_IDX_TJOB_SCOPE` (`SCOPE_ID_`,`SCOPE_TYPE_`),
                                    KEY `ACT_IDX_TJOB_SUB_SCOPE` (`SUB_SCOPE_ID_`,`SCOPE_TYPE_`),
                                    KEY `ACT_IDX_TJOB_SCOPE_DEF` (`SCOPE_DEFINITION_ID_`,`SCOPE_TYPE_`),
                                    KEY `ACT_FK_TIMER_JOB_EXECUTION` (`EXECUTION_ID_`),
                                    KEY `ACT_FK_TIMER_JOB_PROCESS_INSTANCE` (`PROCESS_INSTANCE_ID_`),
                                    KEY `ACT_FK_TIMER_JOB_PROC_DEF` (`PROC_DEF_ID_`),
                                    CONSTRAINT `ACT_FK_TIMER_JOB_CUSTOM_VALUES` FOREIGN KEY (`CUSTOM_VALUES_ID_`) REFERENCES `ACT_GE_BYTEARRAY` (`ID_`),
                                    CONSTRAINT `ACT_FK_TIMER_JOB_EXCEPTION` FOREIGN KEY (`EXCEPTION_STACK_ID_`) REFERENCES `ACT_GE_BYTEARRAY` (`ID_`),
                                    CONSTRAINT `ACT_FK_TIMER_JOB_EXECUTION` FOREIGN KEY (`EXECUTION_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`),
                                    CONSTRAINT `ACT_FK_TIMER_JOB_PROCESS_INSTANCE` FOREIGN KEY (`PROCESS_INSTANCE_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`),
                                    CONSTRAINT `ACT_FK_TIMER_JOB_PROC_DEF` FOREIGN KEY (`PROC_DEF_ID_`) REFERENCES `ACT_RE_PROCDEF` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RU_TIMER_JOB
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for ACT_RU_VARIABLE
-- ----------------------------
DROP TABLE IF EXISTS `ACT_RU_VARIABLE`;
CREATE TABLE `ACT_RU_VARIABLE` (
                                   `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                   `REV_` int(11) DEFAULT NULL,
                                   `TYPE_` varchar(255) COLLATE utf8_bin NOT NULL,
                                   `NAME_` varchar(255) COLLATE utf8_bin NOT NULL,
                                   `EXECUTION_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                   `PROC_INST_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                   `TASK_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                   `SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `SUB_SCOPE_ID_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `SCOPE_TYPE_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                   `BYTEARRAY_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                   `DOUBLE_` double DEFAULT NULL,
                                   `LONG_` bigint(20) DEFAULT NULL,
                                   `TEXT_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                   `TEXT2_` varchar(4000) COLLATE utf8_bin DEFAULT NULL,
                                   PRIMARY KEY (`ID_`),
                                   KEY `ACT_IDX_RU_VAR_SCOPE_ID_TYPE` (`SCOPE_ID_`,`SCOPE_TYPE_`),
                                   KEY `ACT_IDX_RU_VAR_SUB_ID_TYPE` (`SUB_SCOPE_ID_`,`SCOPE_TYPE_`),
                                   KEY `ACT_FK_VAR_BYTEARRAY` (`BYTEARRAY_ID_`),
                                   KEY `ACT_IDX_VARIABLE_TASK_ID` (`TASK_ID_`),
                                   KEY `ACT_FK_VAR_EXE` (`EXECUTION_ID_`),
                                   KEY `ACT_FK_VAR_PROCINST` (`PROC_INST_ID_`),
                                   CONSTRAINT `ACT_FK_VAR_BYTEARRAY` FOREIGN KEY (`BYTEARRAY_ID_`) REFERENCES `ACT_GE_BYTEARRAY` (`ID_`),
                                   CONSTRAINT `ACT_FK_VAR_EXE` FOREIGN KEY (`EXECUTION_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`),
                                   CONSTRAINT `ACT_FK_VAR_PROCINST` FOREIGN KEY (`PROC_INST_ID_`) REFERENCES `ACT_RU_EXECUTION` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of ACT_RU_VARIABLE
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for FLW_CHANNEL_DEFINITION
-- ----------------------------
DROP TABLE IF EXISTS `FLW_CHANNEL_DEFINITION`;
CREATE TABLE `FLW_CHANNEL_DEFINITION` (
                                          `ID_` varchar(255) NOT NULL,
                                          `NAME_` varchar(255) DEFAULT NULL,
                                          `VERSION_` int(11) DEFAULT NULL,
                                          `KEY_` varchar(255) DEFAULT NULL,
                                          `CATEGORY_` varchar(255) DEFAULT NULL,
                                          `DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                          `CREATE_TIME_` datetime(3) DEFAULT NULL,
                                          `TENANT_ID_` varchar(255) DEFAULT NULL,
                                          `RESOURCE_NAME_` varchar(255) DEFAULT NULL,
                                          `DESCRIPTION_` varchar(255) DEFAULT NULL,
                                          `TYPE_` varchar(255) DEFAULT NULL,
                                          `IMPLEMENTATION_` varchar(255) DEFAULT NULL,
                                          PRIMARY KEY (`ID_`),
                                          UNIQUE KEY `ACT_IDX_CHANNEL_DEF_UNIQ` (`KEY_`,`VERSION_`,`TENANT_ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of FLW_CHANNEL_DEFINITION
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for FLW_EVENT_DEFINITION
-- ----------------------------
DROP TABLE IF EXISTS `FLW_EVENT_DEFINITION`;
CREATE TABLE `FLW_EVENT_DEFINITION` (
                                        `ID_` varchar(255) NOT NULL,
                                        `NAME_` varchar(255) DEFAULT NULL,
                                        `VERSION_` int(11) DEFAULT NULL,
                                        `KEY_` varchar(255) DEFAULT NULL,
                                        `CATEGORY_` varchar(255) DEFAULT NULL,
                                        `DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                        `TENANT_ID_` varchar(255) DEFAULT NULL,
                                        `RESOURCE_NAME_` varchar(255) DEFAULT NULL,
                                        `DESCRIPTION_` varchar(255) DEFAULT NULL,
                                        PRIMARY KEY (`ID_`),
                                        UNIQUE KEY `ACT_IDX_EVENT_DEF_UNIQ` (`KEY_`,`VERSION_`,`TENANT_ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of FLW_EVENT_DEFINITION
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for FLW_EVENT_DEPLOYMENT
-- ----------------------------
DROP TABLE IF EXISTS `FLW_EVENT_DEPLOYMENT`;
CREATE TABLE `FLW_EVENT_DEPLOYMENT` (
                                        `ID_` varchar(255) NOT NULL,
                                        `NAME_` varchar(255) DEFAULT NULL,
                                        `CATEGORY_` varchar(255) DEFAULT NULL,
                                        `DEPLOY_TIME_` datetime(3) DEFAULT NULL,
                                        `TENANT_ID_` varchar(255) DEFAULT NULL,
                                        `PARENT_DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                        PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of FLW_EVENT_DEPLOYMENT
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for FLW_EVENT_RESOURCE
-- ----------------------------
DROP TABLE IF EXISTS `FLW_EVENT_RESOURCE`;
CREATE TABLE `FLW_EVENT_RESOURCE` (
                                      `ID_` varchar(255) NOT NULL,
                                      `NAME_` varchar(255) DEFAULT NULL,
                                      `DEPLOYMENT_ID_` varchar(255) DEFAULT NULL,
                                      `RESOURCE_BYTES_` longblob,
                                      PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of FLW_EVENT_RESOURCE
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for FLW_EV_DATABASECHANGELOG
-- ----------------------------
DROP TABLE IF EXISTS `FLW_EV_DATABASECHANGELOG`;
CREATE TABLE `FLW_EV_DATABASECHANGELOG` (
                                            `ID` varchar(255) NOT NULL,
                                            `AUTHOR` varchar(255) NOT NULL,
                                            `FILENAME` varchar(255) NOT NULL,
                                            `DATEEXECUTED` datetime NOT NULL,
                                            `ORDEREXECUTED` int(11) NOT NULL,
                                            `EXECTYPE` varchar(10) NOT NULL,
                                            `MD5SUM` varchar(35) DEFAULT NULL,
                                            `DESCRIPTION` varchar(255) DEFAULT NULL,
                                            `COMMENTS` varchar(255) DEFAULT NULL,
                                            `TAG` varchar(255) DEFAULT NULL,
                                            `LIQUIBASE` varchar(20) DEFAULT NULL,
                                            `CONTEXTS` varchar(255) DEFAULT NULL,
                                            `LABELS` varchar(255) DEFAULT NULL,
                                            `DEPLOYMENT_ID` varchar(10) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of FLW_EV_DATABASECHANGELOG
-- ----------------------------
BEGIN;
INSERT INTO `FLW_EV_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('1', 'flowable', 'org/flowable/eventregistry/db/liquibase/flowable-eventregistry-db-changelog.xml', '2022-12-11 17:28:49', 1, 'EXECUTED', '8:1b0c48c9cf7945be799d868a2626d687', 'createTable tableName=FLW_EVENT_DEPLOYMENT; createTable tableName=FLW_EVENT_RESOURCE; createTable tableName=FLW_EVENT_DEFINITION; createIndex indexName=ACT_IDX_EVENT_DEF_UNIQ, tableName=FLW_EVENT_DEFINITION; createTable tableName=FLW_CHANNEL_DEFIN...', '', NULL, '4.3.5', NULL, NULL, '0750929197');
INSERT INTO `FLW_EV_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('2', 'flowable', 'org/flowable/eventregistry/db/liquibase/flowable-eventregistry-db-changelog.xml', '2022-12-11 17:28:49', 2, 'EXECUTED', '8:0ea825feb8e470558f0b5754352b9cda', 'addColumn tableName=FLW_CHANNEL_DEFINITION; addColumn tableName=FLW_CHANNEL_DEFINITION', '', NULL, '4.3.5', NULL, NULL, '0750929197');
INSERT INTO `FLW_EV_DATABASECHANGELOG` (`ID`, `AUTHOR`, `FILENAME`, `DATEEXECUTED`, `ORDEREXECUTED`, `EXECTYPE`, `MD5SUM`, `DESCRIPTION`, `COMMENTS`, `TAG`, `LIQUIBASE`, `CONTEXTS`, `LABELS`, `DEPLOYMENT_ID`) VALUES ('3', 'flowable', 'org/flowable/eventregistry/db/liquibase/flowable-eventregistry-db-changelog.xml', '2022-12-11 17:28:49', 3, 'EXECUTED', '8:3c2bb293350b5cbe6504331980c9dcee', 'customChange', '', NULL, '4.3.5', NULL, NULL, '0750929197');
COMMIT;

-- ----------------------------
-- Table structure for FLW_EV_DATABASECHANGELOGLOCK
-- ----------------------------
DROP TABLE IF EXISTS `FLW_EV_DATABASECHANGELOGLOCK`;
CREATE TABLE `FLW_EV_DATABASECHANGELOGLOCK` (
                                                `ID` int(11) NOT NULL,
                                                `LOCKED` bit(1) NOT NULL,
                                                `LOCKGRANTED` datetime DEFAULT NULL,
                                                `LOCKEDBY` varchar(255) DEFAULT NULL,
                                                PRIMARY KEY (`ID`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

-- ----------------------------
-- Records of FLW_EV_DATABASECHANGELOGLOCK
-- ----------------------------
BEGIN;
INSERT INTO `FLW_EV_DATABASECHANGELOGLOCK` (`ID`, `LOCKED`, `LOCKGRANTED`, `LOCKEDBY`) VALUES (1, b'0', NULL, NULL);
COMMIT;

-- ----------------------------
-- Table structure for FLW_RU_BATCH
-- ----------------------------
DROP TABLE IF EXISTS `FLW_RU_BATCH`;
CREATE TABLE `FLW_RU_BATCH` (
                                `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                `REV_` int(11) DEFAULT NULL,
                                `TYPE_` varchar(64) COLLATE utf8_bin NOT NULL,
                                `SEARCH_KEY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                `SEARCH_KEY2_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                `CREATE_TIME_` datetime(3) NOT NULL,
                                `COMPLETE_TIME_` datetime(3) DEFAULT NULL,
                                `STATUS_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                `BATCH_DOC_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                PRIMARY KEY (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of FLW_RU_BATCH
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for FLW_RU_BATCH_PART
-- ----------------------------
DROP TABLE IF EXISTS `FLW_RU_BATCH_PART`;
CREATE TABLE `FLW_RU_BATCH_PART` (
                                     `ID_` varchar(64) COLLATE utf8_bin NOT NULL,
                                     `REV_` int(11) DEFAULT NULL,
                                     `BATCH_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                     `TYPE_` varchar(64) COLLATE utf8_bin NOT NULL,
                                     `SCOPE_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                     `SUB_SCOPE_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                     `SCOPE_TYPE_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                     `SEARCH_KEY_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `SEARCH_KEY2_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `CREATE_TIME_` datetime(3) NOT NULL,
                                     `COMPLETE_TIME_` datetime(3) DEFAULT NULL,
                                     `STATUS_` varchar(255) COLLATE utf8_bin DEFAULT NULL,
                                     `RESULT_DOC_ID_` varchar(64) COLLATE utf8_bin DEFAULT NULL,
                                     `TENANT_ID_` varchar(255) COLLATE utf8_bin DEFAULT '',
                                     PRIMARY KEY (`ID_`),
                                     KEY `FLW_IDX_BATCH_PART` (`BATCH_ID_`),
                                     CONSTRAINT `FLW_FK_BATCH_PART_PARENT` FOREIGN KEY (`BATCH_ID_`) REFERENCES `FLW_RU_BATCH` (`ID_`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_bin;

-- ----------------------------
-- Records of FLW_RU_BATCH_PART
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for QRTZ_BLOB_TRIGGERS
-- ----------------------------
DROP TABLE IF EXISTS `QRTZ_BLOB_TRIGGERS`;
CREATE TABLE `QRTZ_BLOB_TRIGGERS` (
                                      `sched_name` varchar(120) NOT NULL COMMENT '调度名称',
                                      `trigger_name` varchar(200) NOT NULL COMMENT 'qrtz_triggers表trigger_name的外键',
                                      `trigger_group` varchar(200) NOT NULL COMMENT 'qrtz_triggers表trigger_group的外键',
                                      `blob_data` blob COMMENT '存放持久化Trigger对象',
                                      PRIMARY KEY (`sched_name`,`trigger_name`,`trigger_group`),
                                      CONSTRAINT `qrtz_blob_triggers_ibfk_1` FOREIGN KEY (`sched_name`, `trigger_name`, `trigger_group`) REFERENCES `QRTZ_TRIGGERS` (`sched_name`, `trigger_name`, `trigger_group`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT='Blob类型的触发器表';

-- ----------------------------
-- Records of QRTZ_BLOB_TRIGGERS
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for QRTZ_CALENDARS
-- ----------------------------
DROP TABLE IF EXISTS `QRTZ_CALENDARS`;
CREATE TABLE `QRTZ_CALENDARS` (
                                  `sched_name` varchar(120) NOT NULL COMMENT '调度名称',
                                  `calendar_name` varchar(200) NOT NULL COMMENT '日历名称',
                                  `calendar` blob NOT NULL COMMENT '存放持久化calendar对象',
                                  PRIMARY KEY (`sched_name`,`calendar_name`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT='日历信息表';

-- ----------------------------
-- Records of QRTZ_CALENDARS
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for QRTZ_CRON_TRIGGERS
-- ----------------------------
DROP TABLE IF EXISTS `QRTZ_CRON_TRIGGERS`;
CREATE TABLE `QRTZ_CRON_TRIGGERS` (
                                      `sched_name` varchar(120) NOT NULL COMMENT '调度名称',
                                      `trigger_name` varchar(200) NOT NULL COMMENT 'qrtz_triggers表trigger_name的外键',
                                      `trigger_group` varchar(200) NOT NULL COMMENT 'qrtz_triggers表trigger_group的外键',
                                      `cron_expression` varchar(200) NOT NULL COMMENT 'cron表达式',
                                      `time_zone_id` varchar(80) DEFAULT NULL COMMENT '时区',
                                      PRIMARY KEY (`sched_name`,`trigger_name`,`trigger_group`),
                                      CONSTRAINT `qrtz_cron_triggers_ibfk_1` FOREIGN KEY (`sched_name`, `trigger_name`, `trigger_group`) REFERENCES `QRTZ_TRIGGERS` (`sched_name`, `trigger_name`, `trigger_group`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT='Cron类型的触发器表';

-- ----------------------------
-- Records of QRTZ_CRON_TRIGGERS
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for QRTZ_FIRED_TRIGGERS
-- ----------------------------
DROP TABLE IF EXISTS `QRTZ_FIRED_TRIGGERS`;
CREATE TABLE `QRTZ_FIRED_TRIGGERS` (
                                       `sched_name` varchar(120) NOT NULL COMMENT '调度名称',
                                       `entry_id` varchar(95) NOT NULL COMMENT '调度器实例id',
                                       `trigger_name` varchar(200) NOT NULL COMMENT 'qrtz_triggers表trigger_name的外键',
                                       `trigger_group` varchar(200) NOT NULL COMMENT 'qrtz_triggers表trigger_group的外键',
                                       `instance_name` varchar(200) NOT NULL COMMENT '调度器实例名',
                                       `fired_time` bigint(13) NOT NULL COMMENT '触发的时间',
                                       `sched_time` bigint(13) NOT NULL COMMENT '定时器制定的时间',
                                       `priority` int(11) NOT NULL COMMENT '优先级',
                                       `state` varchar(16) NOT NULL COMMENT '状态',
                                       `job_name` varchar(200) DEFAULT NULL COMMENT '任务名称',
                                       `job_group` varchar(200) DEFAULT NULL COMMENT '任务组名',
                                       `is_nonconcurrent` varchar(1) DEFAULT NULL COMMENT '是否并发',
                                       `requests_recovery` varchar(1) DEFAULT NULL COMMENT '是否接受恢复执行',
                                       PRIMARY KEY (`sched_name`,`entry_id`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT='已触发的触发器表';

-- ----------------------------
-- Records of QRTZ_FIRED_TRIGGERS
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for QRTZ_JOB_DETAILS
-- ----------------------------
DROP TABLE IF EXISTS `QRTZ_JOB_DETAILS`;
CREATE TABLE `QRTZ_JOB_DETAILS` (
                                    `sched_name` varchar(120) NOT NULL COMMENT '调度名称',
                                    `job_name` varchar(200) NOT NULL COMMENT '任务名称',
                                    `job_group` varchar(200) NOT NULL COMMENT '任务组名',
                                    `description` varchar(250) DEFAULT NULL COMMENT '相关介绍',
                                    `job_class_name` varchar(250) NOT NULL COMMENT '执行任务类名称',
                                    `is_durable` varchar(1) NOT NULL COMMENT '是否持久化',
                                    `is_nonconcurrent` varchar(1) NOT NULL COMMENT '是否并发',
                                    `is_update_data` varchar(1) NOT NULL COMMENT '是否更新数据',
                                    `requests_recovery` varchar(1) NOT NULL COMMENT '是否接受恢复执行',
                                    `job_data` blob COMMENT '存放持久化job对象',
                                    PRIMARY KEY (`sched_name`,`job_name`,`job_group`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT='任务详细信息表';

-- ----------------------------
-- Records of QRTZ_JOB_DETAILS
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for QRTZ_LOCKS
-- ----------------------------
DROP TABLE IF EXISTS `QRTZ_LOCKS`;
CREATE TABLE `QRTZ_LOCKS` (
                              `sched_name` varchar(120) NOT NULL COMMENT '调度名称',
                              `lock_name` varchar(40) NOT NULL COMMENT '悲观锁名称',
                              PRIMARY KEY (`sched_name`,`lock_name`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT='存储的悲观锁信息表';

-- ----------------------------
-- Records of QRTZ_LOCKS
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for QRTZ_PAUSED_TRIGGER_GRPS
-- ----------------------------
DROP TABLE IF EXISTS `QRTZ_PAUSED_TRIGGER_GRPS`;
CREATE TABLE `QRTZ_PAUSED_TRIGGER_GRPS` (
                                            `sched_name` varchar(120) NOT NULL COMMENT '调度名称',
                                            `trigger_group` varchar(200) NOT NULL COMMENT 'qrtz_triggers表trigger_group的外键',
                                            PRIMARY KEY (`sched_name`,`trigger_group`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT='暂停的触发器表';

-- ----------------------------
-- Records of QRTZ_PAUSED_TRIGGER_GRPS
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for QRTZ_SCHEDULER_STATE
-- ----------------------------
DROP TABLE IF EXISTS `QRTZ_SCHEDULER_STATE`;
CREATE TABLE `QRTZ_SCHEDULER_STATE` (
                                        `sched_name` varchar(120) NOT NULL COMMENT '调度名称',
                                        `instance_name` varchar(200) NOT NULL COMMENT '实例名称',
                                        `last_checkin_time` bigint(13) NOT NULL COMMENT '上次检查时间',
                                        `checkin_interval` bigint(13) NOT NULL COMMENT '检查间隔时间',
                                        PRIMARY KEY (`sched_name`,`instance_name`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT='调度器状态表';

-- ----------------------------
-- Records of QRTZ_SCHEDULER_STATE
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for QRTZ_SIMPLE_TRIGGERS
-- ----------------------------
DROP TABLE IF EXISTS `QRTZ_SIMPLE_TRIGGERS`;
CREATE TABLE `QRTZ_SIMPLE_TRIGGERS` (
                                        `sched_name` varchar(120) NOT NULL COMMENT '调度名称',
                                        `trigger_name` varchar(200) NOT NULL COMMENT 'qrtz_triggers表trigger_name的外键',
                                        `trigger_group` varchar(200) NOT NULL COMMENT 'qrtz_triggers表trigger_group的外键',
                                        `repeat_count` bigint(7) NOT NULL COMMENT '重复的次数统计',
                                        `repeat_interval` bigint(12) NOT NULL COMMENT '重复的间隔时间',
                                        `times_triggered` bigint(10) NOT NULL COMMENT '已经触发的次数',
                                        PRIMARY KEY (`sched_name`,`trigger_name`,`trigger_group`),
                                        CONSTRAINT `qrtz_simple_triggers_ibfk_1` FOREIGN KEY (`sched_name`, `trigger_name`, `trigger_group`) REFERENCES `QRTZ_TRIGGERS` (`sched_name`, `trigger_name`, `trigger_group`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT='简单触发器的信息表';

-- ----------------------------
-- Records of QRTZ_SIMPLE_TRIGGERS
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for QRTZ_SIMPROP_TRIGGERS
-- ----------------------------
DROP TABLE IF EXISTS `QRTZ_SIMPROP_TRIGGERS`;
CREATE TABLE `QRTZ_SIMPROP_TRIGGERS` (
                                         `sched_name` varchar(120) NOT NULL COMMENT '调度名称',
                                         `trigger_name` varchar(200) NOT NULL COMMENT 'qrtz_triggers表trigger_name的外键',
                                         `trigger_group` varchar(200) NOT NULL COMMENT 'qrtz_triggers表trigger_group的外键',
                                         `str_prop_1` varchar(512) DEFAULT NULL COMMENT 'String类型的trigger的第一个参数',
                                         `str_prop_2` varchar(512) DEFAULT NULL COMMENT 'String类型的trigger的第二个参数',
                                         `str_prop_3` varchar(512) DEFAULT NULL COMMENT 'String类型的trigger的第三个参数',
                                         `int_prop_1` int(11) DEFAULT NULL COMMENT 'int类型的trigger的第一个参数',
                                         `int_prop_2` int(11) DEFAULT NULL COMMENT 'int类型的trigger的第二个参数',
                                         `long_prop_1` bigint(20) DEFAULT NULL COMMENT 'long类型的trigger的第一个参数',
                                         `long_prop_2` bigint(20) DEFAULT NULL COMMENT 'long类型的trigger的第二个参数',
                                         `dec_prop_1` decimal(13,4) DEFAULT NULL COMMENT 'decimal类型的trigger的第一个参数',
                                         `dec_prop_2` decimal(13,4) DEFAULT NULL COMMENT 'decimal类型的trigger的第二个参数',
                                         `bool_prop_1` varchar(1) DEFAULT NULL COMMENT 'Boolean类型的trigger的第一个参数',
                                         `bool_prop_2` varchar(1) DEFAULT NULL COMMENT 'Boolean类型的trigger的第二个参数',
                                         PRIMARY KEY (`sched_name`,`trigger_name`,`trigger_group`),
                                         CONSTRAINT `qrtz_simprop_triggers_ibfk_1` FOREIGN KEY (`sched_name`, `trigger_name`, `trigger_group`) REFERENCES `QRTZ_TRIGGERS` (`sched_name`, `trigger_name`, `trigger_group`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT='同步机制的行锁表';

-- ----------------------------
-- Records of QRTZ_SIMPROP_TRIGGERS
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for QRTZ_TRIGGERS
-- ----------------------------
DROP TABLE IF EXISTS `QRTZ_TRIGGERS`;
CREATE TABLE `QRTZ_TRIGGERS` (
                                 `sched_name` varchar(120) NOT NULL COMMENT '调度名称',
                                 `trigger_name` varchar(200) NOT NULL COMMENT '触发器的名字',
                                 `trigger_group` varchar(200) NOT NULL COMMENT '触发器所属组的名字',
                                 `job_name` varchar(200) NOT NULL COMMENT 'qrtz_job_details表job_name的外键',
                                 `job_group` varchar(200) NOT NULL COMMENT 'qrtz_job_details表job_group的外键',
                                 `description` varchar(250) DEFAULT NULL COMMENT '相关介绍',
                                 `next_fire_time` bigint(13) DEFAULT NULL COMMENT '上一次触发时间（毫秒）',
                                 `prev_fire_time` bigint(13) DEFAULT NULL COMMENT '下一次触发时间（默认为-1表示不触发）',
                                 `priority` int(11) DEFAULT NULL COMMENT '优先级',
                                 `trigger_state` varchar(16) NOT NULL COMMENT '触发器状态',
                                 `trigger_type` varchar(8) NOT NULL COMMENT '触发器的类型',
                                 `start_time` bigint(13) NOT NULL COMMENT '开始时间',
                                 `end_time` bigint(13) DEFAULT NULL COMMENT '结束时间',
                                 `calendar_name` varchar(200) DEFAULT NULL COMMENT '日程表名称',
                                 `misfire_instr` smallint(2) DEFAULT NULL COMMENT '补偿执行的策略',
                                 `job_data` blob COMMENT '存放持久化job对象',
                                 PRIMARY KEY (`sched_name`,`trigger_name`,`trigger_group`),
                                 KEY `sched_name` (`sched_name`,`job_name`,`job_group`),
                                 CONSTRAINT `qrtz_triggers_ibfk_1` FOREIGN KEY (`sched_name`, `job_name`, `job_group`) REFERENCES `QRTZ_JOB_DETAILS` (`sched_name`, `job_name`, `job_group`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT='触发器详细信息表';

-- ----------------------------
-- Records of QRTZ_TRIGGERS
-- ----------------------------
BEGIN;
COMMIT;

-- ----------------------------
-- Table structure for sys_deploy_form
-- ----------------------------
DROP TABLE IF EXISTS `sys_deploy_form`;
CREATE TABLE `sys_deploy_form` (
                                   `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT '主键',
                                   `form_id` bigint(20) DEFAULT NULL COMMENT '表单主键',
                                   `deploy_id` varchar(50) DEFAULT NULL COMMENT '流程实例主键',
                                   PRIMARY KEY (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=2001 DEFAULT CHARSET=utf8mb4 COMMENT='流程实例关联表单';

-- ----------------------------
-- Records of sys_deploy_form
-- ----------------------------
BEGIN;
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2001, 1001, '2001');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2002, 1002, '2005');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2003, 1003, '2009');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2004, 1004, '3001');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2005, 1005, '3005');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2006, 1006, '3009');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2007, 1007, '3013');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2008, 1008, '3017');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2009, 1009, '3021');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2010, 1010, '3025');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2011, 1011, '3029');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2012, 1012, '4001');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2013, 1013, '4005');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2014, 1014, '5001');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2015, 1015, '6001');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2016, 1016, '7001');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2017, 1016, '7005');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2018, 1016, '7009');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2019, 1016, '7013');
INSERT INTO `sys_deploy_form` (`id`, `form_id`, `deploy_id`) VALUES (2020, 1016, '7017');

COMMIT;

-- ----------------------------
-- Records of sys_dict_data
-- ----------------------------
BEGIN;
INSERT INTO `sys_dict_data` (`dict_code`, `dict_sort`, `dict_label`, `dict_value`, `dict_type`, `css_class`, `list_class`, `is_default`, `status`, `create_by`, `create_time`, `update_by`, `update_time`, `remark`) VALUES (200, 0, '请假流程', 'leave', 'sys_process_category', NULL, 'default', 'N', '0', 'admin', '2022-12-12 11:17:56', '', NULL, NULL);
INSERT INTO `sys_dict_data` (`dict_code`, `dict_sort`, `dict_label`, `dict_value`, `dict_type`, `css_class`, `list_class`, `is_default`, `status`, `create_by`, `create_time`, `update_by`, `update_time`, `remark`) VALUES (201, 1, 'OA流程', 'oa', 'sys_process_category', NULL, 'default', 'N', '0', 'admin', '2022-12-12 11:18:08', '', NULL, NULL);
INSERT INTO `sys_dict_data` (`dict_code`, `dict_sort`, `dict_label`, `dict_value`, `dict_type`, `css_class`, `list_class`, `is_default`, `status`, `create_by`, `create_time`, `update_by`, `update_time`, `remark`) VALUES (302, 0, '正常', '0', 'common_status', NULL, 'success', 'N', '0', 'admin', '2022-12-18 22:01:08', '', NULL, NULL);
INSERT INTO `sys_dict_data` (`dict_code`, `dict_sort`, `dict_label`, `dict_value`, `dict_type`, `css_class`, `list_class`, `is_default`, `status`, `create_by`, `create_time`, `update_by`, `update_time`, `remark`) VALUES (303, 1, '禁用', '1', 'common_status', NULL, 'danger', 'N', '0', 'admin', '2022-12-18 22:01:21', '', NULL, NULL);
INSERT INTO `sys_dict_data` (`dict_code`, `dict_sort`, `dict_label`, `dict_value`, `dict_type`, `css_class`, `list_class`, `is_default`, `status`, `create_by`, `create_time`, `update_by`, `update_time`, `remark`) VALUES (304, 0, '任务监听', '1', 'sys_listener_type', NULL, 'default', 'N', '0', 'admin', '2022-12-25 11:47:26', '', NULL, NULL);
INSERT INTO `sys_dict_data` (`dict_code`, `dict_sort`, `dict_label`, `dict_value`, `dict_type`, `css_class`, `list_class`, `is_default`, `status`, `create_by`, `create_time`, `update_by`, `update_time`, `remark`) VALUES (305, 1, '执行监听', '2', 'sys_listener_type', NULL, 'default', 'N', '0', 'admin', '2022-12-25 11:47:37', '', NULL, NULL);
INSERT INTO `sys_dict_data` (`dict_code`, `dict_sort`, `dict_label`, `dict_value`, `dict_type`, `css_class`, `list_class`, `is_default`, `status`, `create_by`, `create_time`, `update_by`, `update_time`, `remark`) VALUES (306, 0, 'JAVA类', '1', 'sys_listener_value_type', NULL, 'default', 'N', '0', 'admin', '2022-12-25 11:48:55', '', NULL, NULL);
INSERT INTO `sys_dict_data` (`dict_code`, `dict_sort`, `dict_label`, `dict_value`, `dict_type`, `css_class`, `list_class`, `is_default`, `status`, `create_by`, `create_time`, `update_by`, `update_time`, `remark`) VALUES (307, 1, '表达式', '2', 'sys_listener_value_type', NULL, 'default', 'N', '0', 'admin', '2022-12-25 11:49:05', '', NULL, NULL);
INSERT INTO `sys_dict_data` (`dict_code`, `dict_sort`, `dict_label`, `dict_value`, `dict_type`, `css_class`, `list_class`, `is_default`, `status`, `create_by`, `create_time`, `update_by`, `update_time`, `remark`) VALUES (308, 2, '代理表达式', '3', 'sys_listener_value_type', NULL, 'default', 'N', '0', 'admin', '2022-12-25 11:49:16', '', NULL, NULL);
COMMIT;

-- ----------------------------
-- Records of sys_dict_type
-- ----------------------------
BEGIN;
INSERT INTO `sys_dict_type` (`dict_id`, `dict_name`, `dict_type`, `status`, `create_by`, `create_time`, `update_by`, `update_time`, `remark`) VALUES (100, '流程分类', 'sys_process_category', '0', 'admin', '2022-12-12 11:17:38', '', NULL, NULL);
INSERT INTO `sys_dict_type` (`dict_id`, `dict_name`, `dict_type`, `status`, `create_by`, `create_time`, `update_by`, `update_time`, `remark`) VALUES (101, '通用状态', 'common_status', '0', 'admin', '2022-12-18 22:00:02', '', NULL, NULL);
INSERT INTO `sys_dict_type` (`dict_id`, `dict_name`, `dict_type`, `status`, `create_by`, `create_time`, `update_by`, `update_time`, `remark`) VALUES (102, '监听类型', 'sys_listener_type', '0', 'admin', '2022-12-18 22:03:07', '', NULL, NULL);
INSERT INTO `sys_dict_type` (`dict_id`, `dict_name`, `dict_type`, `status`, `create_by`, `create_time`, `update_by`, `update_time`, `remark`) VALUES (103, '监听值类型', 'sys_listener_value_type', '0', 'admin', '2022-12-18 22:03:39', '', NULL, NULL);
INSERT INTO `sys_dict_type` (`dict_id`, `dict_name`, `dict_type`, `status`, `create_by`, `create_time`, `update_by`, `update_time`, `remark`) VALUES (104, '监听属性', 'sys_listener_event_type', '0', 'admin', '2022-12-18 22:04:29', '', NULL, NULL);
COMMIT;

-- ----------------------------
-- Table structure for sys_expression
-- ----------------------------
DROP TABLE IF EXISTS `sys_expression`;
CREATE TABLE `sys_expression` (
                                  `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT '表单主键',
                                  `name` varchar(50) DEFAULT NULL COMMENT '表达式名称',
                                  `expression` varchar(255) DEFAULT NULL COMMENT '表达式内容',
                                  `create_time` datetime DEFAULT NULL COMMENT '创建时间',
                                  `update_time` datetime DEFAULT NULL COMMENT '更新时间',
                                  `create_by` bigint(20) DEFAULT NULL COMMENT '创建人员',
                                  `update_by` bigint(20) DEFAULT NULL COMMENT '更新人员',
                                  `status` tinyint(2) DEFAULT '0' COMMENT '状态',
                                  `remark` varchar(255) DEFAULT NULL COMMENT '备注',
                                  PRIMARY KEY (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=3 DEFAULT CHARSET=utf8mb4 COMMENT='流程表达式';

-- ----------------------------
-- Records of sys_expression
-- ----------------------------
BEGIN;
INSERT INTO `sys_expression` (`id`, `name`, `expression`, `create_time`, `update_time`, `create_by`, `update_by`, `status`, `remark`) VALUES (1, '流程发起人', '${INITIATOR}', '2022-12-12 17:29:10', NULL, NULL, NULL, 0, NULL);
INSERT INTO `sys_expression` (`id`, `name`, `expression`, `create_time`, `update_time`, `create_by`, `update_by`, `status`, `remark`) VALUES (2, '审批流程指定接收人', '#{approval}', '2022-12-12 17:43:10', NULL, NULL, NULL, 0, NULL);
INSERT INTO `sys_expression` (`id`, `name`, `expression`, `create_time`, `update_time`, `create_by`, `update_by`, `status`, `remark`) VALUES (3, '审批流程多实例指定接收人', '#{approver}', '2024-04-15 17:29:50', NULL, NULL, NULL, 0, NULL);
COMMIT;

-- ----------------------------
-- Table structure for sys_form
-- ----------------------------
DROP TABLE IF EXISTS `sys_form`;
CREATE TABLE `sys_form` (
                            `form_id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT '表单主键',
                            `form_name` varchar(50) DEFAULT NULL COMMENT '表单名称',
                            `form_content` longtext COMMENT '表单内容',
                            `create_time` datetime DEFAULT NULL COMMENT '创建时间',
                            `update_time` datetime DEFAULT NULL COMMENT '更新时间',
                            `create_by` bigint(20) DEFAULT NULL COMMENT '创建人员',
                            `update_by` bigint(20) DEFAULT NULL COMMENT '更新人员',
                            `remark` varchar(255) DEFAULT NULL COMMENT '备注',
                            PRIMARY KEY (`form_id`)
) ENGINE=InnoDB AUTO_INCREMENT=1005 DEFAULT CHARSET=utf8mb4 COMMENT='流程表单';

-- ----------------------------
-- Records of sys_form
-- ----------------------------
BEGIN;
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1001, '承接评审表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1002, '分包评审表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1003, '品牌支付表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1004, '项目流转表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1005, '安全交底表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1006, '技术交底表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1007, '技术方案表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1008, '项目预算表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1009, '成果归档表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1010, '项目结算表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1011, '项目变更表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1012, '借款申请表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1013, '保证金申请表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1014, '用车申请表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1015, '设备申请表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
INSERT INTO `sys_form` (`form_id`, `form_name`, `form_content`, `create_time`, `update_time`, `create_by`, `update_by`, `remark`) VALUES (1016, '考核表', '{}', '2024-01-12 14:40:42', NULL, NULL, NULL, NULL);
COMMIT;

-- ----------------------------
-- Table structure for sys_listener
-- ----------------------------
DROP TABLE IF EXISTS `sys_listener`;
CREATE TABLE `sys_listener` (
                                `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT '表单主键',
                                `name` varchar(128) DEFAULT NULL COMMENT '名称',
                                `type` char(2) DEFAULT NULL COMMENT '监听类型',
                                `event_type` varchar(32) DEFAULT NULL COMMENT '事件类型',
                                `value_type` char(2) DEFAULT NULL COMMENT '值类型',
                                `value` varchar(255) DEFAULT NULL COMMENT '执行内容',
                                `create_time` datetime DEFAULT NULL COMMENT '创建时间',
                                `update_time` datetime DEFAULT NULL COMMENT '更新时间',
                                `create_by` bigint(20) DEFAULT NULL COMMENT '创建人员',
                                `update_by` bigint(20) DEFAULT NULL COMMENT '更新人员',
                                `status` tinyint(2) DEFAULT '0' COMMENT '状态',
                                `remark` varchar(255) DEFAULT NULL COMMENT '备注',
                                PRIMARY KEY (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=3 DEFAULT CHARSET=utf8mb4 COMMENT='流程监听';

-- ----------------------------
-- Records of sys_listener
-- ----------------------------
BEGIN;
INSERT INTO `sys_listener` (`id`, `name`, `type`, `event_type`, `value_type`, `value`, `create_time`, `update_time`, `create_by`, `update_by`, `status`, `remark`) VALUES (1, '任务监听', '1', 'assignment', '1', 'com.ruoyi.flowable.listener.FlowTaskListener', '2022-12-25 12:31:50', NULL, NULL, NULL, 0, NULL);
INSERT INTO `sys_listener` (`id`, `name`, `type`, `event_type`, `value_type`, `value`, `create_time`, `update_time`, `create_by`, `update_by`, `status`, `remark`) VALUES (2, '执行监听', '2', 'start', '1', 'com.ruoyi.flowable.listener.FlowExecutionListener', '2022-12-25 12:41:10', NULL, NULL, NULL, 0, NULL);
COMMIT;

-- ----------------------------
-- Records of sys_menu
-- ----------------------------
BEGIN;
INSERT INTO `sys_menu` VALUES (2021, '流程管理', 0, 8, 'flowable', NULL, NULL, 1, 0, 'M', '0', '0', NULL, 'cascader', 'tony', '2021-03-25 11:35:09', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2022, '流程定义', 2021, 2, 'definition', 'flowable/definition/index', NULL, 1, 0, 'C', '0', '0', '', 'job', 'tony', '2021-03-25 13:53:55', 'admin', '2021-03-29 09:39:07', '');
INSERT INTO `sys_menu` VALUES (2023, '任务管理', 0, 0, 'task', NULL, NULL, 1, 0, 'M', '0', '0', '', 'dict', 'tony', '2021-03-26 10:53:10', 'admin', '2021-03-29 09:37:40', '');
INSERT INTO `sys_menu` VALUES (2024, '待办任务', 2023, 2, 'todo', 'flowable/task/todo/index', NULL, 1, 1, 'C', '0', '0', '', 'cascader', 'admin', '2021-03-26 10:55:52', 'admin', '2021-03-30 09:26:36', '');
INSERT INTO `sys_menu` VALUES (2025, '已办任务', 2023, 3, 'finished', 'flowable/task/finished/index', NULL, 1, 1, 'C', '0', '0', '', 'time-range', 'admin', '2021-03-26 10:57:54', 'admin', '2021-03-30 09:26:50', '');
INSERT INTO `sys_menu` VALUES (2026, '我的流程', 2023, 1, 'process', 'flowable/task/myProcess/index', NULL, 1, 1, 'C', '0', '0', '', 'guide', 'admin', '2021-03-30 09:26:23', 'admin', '2022-12-12 09:58:07', '');
INSERT INTO `sys_menu` VALUES (2027, '表单配置', 2021, 2, 'form', 'flowable/task/form/index', NULL, 1, 0, 'C', '0', '0', 'flowable:form:list', 'form', 'admin', '2021-03-30 22:55:12', 'admin', '2021-04-03 18:50:54', '');
INSERT INTO `sys_menu` VALUES (2028, '表单新增', 2027, 1, '', NULL, NULL, 1, 0, 'F', '0', '0', 'flowable:form:add', '#', 'admin', '2021-07-07 14:23:37', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2029, '表单删除', 2027, 3, '', NULL, NULL, 1, 0, 'F', '0', '0', 'flowable:form:remove', '#', 'admin', '2021-07-07 14:24:10', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2030, '表单编辑', 2027, 2, '', NULL, NULL, 1, 0, 'F', '0', '0', 'flowable:form:edit', '#', 'admin', '2021-07-07 14:24:31', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2031, '流程新增', 2026, 1, '', NULL, NULL, 1, 0, 'F', '0', '0', 'system:deployment:add', '#', 'admin', '2021-07-07 14:25:22', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2032, '流程编辑', 2026, 2, '', NULL, NULL, 1, 0, 'F', '0', '0', 'system:deployment:edit', '#', 'admin', '2021-07-07 14:25:47', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2033, '流程删除', 2026, 3, '', NULL, NULL, 1, 0, 'F', '0', '0', 'system:deployment:remove', '#', 'admin', '2021-07-07 14:26:02', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2034, '表单查询', 2027, 4, '', NULL, NULL, 1, 0, 'F', '0', '0', 'flowable:form:query', '#', 'admin', '2021-07-08 14:05:22', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2035, '修改密码', 100, 8, '', NULL, NULL, 1, 0, 'F', '0', '0', 'system:user:updatePwd', '#', 'admin', '2022-04-29 11:27:13', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2036, '流程表达式', 2021, 3, 'expression', 'system/expression/index', NULL, 1, 1, 'C', '0', '0', 'system:expression:list', 'list', 'admin', '2022-12-12 17:12:19', 'admin', '2022-12-12 17:13:44', '流程达式菜单');
INSERT INTO `sys_menu` VALUES (2037, '流程达式查询', 2036, 1, '#', '', NULL, 1, 0, 'F', '0', '0', 'system:expression:query', '#', 'admin', '2022-12-12 17:12:19', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2038, '流程达式新增', 2036, 2, '#', '', NULL, 1, 0, 'F', '0', '0', 'system:expression:add', '#', 'admin', '2022-12-12 17:12:19', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2039, '流程达式修改', 2036, 3, '#', '', NULL, 1, 0, 'F', '0', '0', 'system:expression:edit', '#', 'admin', '2022-12-12 17:12:19', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2040, '流程达式删除', 2036, 4, '#', '', NULL, 1, 0, 'F', '0', '0', 'system:expression:remove', '#', 'admin', '2022-12-12 17:12:19', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2041, '流程达式导出', 2036, 5, '#', '', NULL, 1, 0, 'F', '0', '0', 'system:expression:export', '#', 'admin', '2022-12-12 17:12:19', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2042, '流程监听', 2021, 1, 'listener', 'system/listener/index', NULL, 1, 0, 'C', '0', '0', 'system:listener:list', 'online', 'admin', '2022-12-25 11:44:16', '', NULL, '流程监听菜单');
INSERT INTO `sys_menu` VALUES (2043, '流程监听查询', 2042, 1, '#', '', NULL, 1, 0, 'F', '0', '0', 'system:listener:query', '#', 'admin', '2022-12-25 11:44:16', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2044, '流程监听新增', 2042, 2, '#', '', NULL, 1, 0, 'F', '0', '0', 'system:listener:add', '#', 'admin', '2022-12-25 11:44:16', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2045, '流程监听修改', 2042, 3, '#', '', NULL, 1, 0, 'F', '0', '0', 'system:listener:edit', '#', 'admin', '2022-12-25 11:44:16', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2046, '流程监听删除', 2042, 4, '#', '', NULL, 1, 0, 'F', '0', '0', 'system:listener:remove', '#', 'admin', '2022-12-25 11:44:16', '', NULL, '');
INSERT INTO `sys_menu` VALUES (2047, '流程监听导出', 2042, 5, '#', '', NULL, 1, 0, 'F', '0', '0', 'system:listener:export', '#', 'admin', '2022-12-25 11:44:16', '', NULL, '');
COMMIT;

-- ----------------------------
-- Records of sys_role_menu
-- ----------------------------
BEGIN;
INSERT INTO `sys_role_menu` (`role_id`, `menu_id`) VALUES (2, 2023);
INSERT INTO `sys_role_menu` (`role_id`, `menu_id`) VALUES (2, 2024);
INSERT INTO `sys_role_menu` (`role_id`, `menu_id`) VALUES (2, 2025);
INSERT INTO `sys_role_menu` (`role_id`, `menu_id`) VALUES (2, 2026);
INSERT INTO `sys_role_menu` (`role_id`, `menu_id`) VALUES (2, 2031);
INSERT INTO `sys_role_menu` (`role_id`, `menu_id`) VALUES (2, 2032);
INSERT INTO `sys_role_menu` (`role_id`, `menu_id`) VALUES (2, 2033);
COMMIT;

-- ----------------------------
-- Table structure for sys_task_form
-- ----------------------------
DROP TABLE IF EXISTS `sys_task_form`;
CREATE TABLE `sys_task_form` (
                                 `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT '主键',
                                 `form_id` bigint(20) DEFAULT NULL COMMENT '表单主键',
                                 `task_id` varchar(50) DEFAULT NULL COMMENT '所属任务',
                                 PRIMARY KEY (`id`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT='流程任务关联表单';

-- ----------------------------
-- Records of sys_task_form
-- ----------------------------
BEGIN;
COMMIT;

SET FOREIGN_KEY_CHECKS = 1;